diff options
Diffstat (limited to 'lib/kernel/doc/src/notes.xml')
| -rw-r--r-- | lib/kernel/doc/src/notes.xml | 1089 |
1 files changed, 1069 insertions, 20 deletions
diff --git a/lib/kernel/doc/src/notes.xml b/lib/kernel/doc/src/notes.xml index 0175c38397..f37433110c 100644 --- a/lib/kernel/doc/src/notes.xml +++ b/lib/kernel/doc/src/notes.xml @@ -1,23 +1,24 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE chapter SYSTEM "chapter.dtd"> <chapter> <header> <copyright> - <year>2004</year><year>2013</year> + <year>2004</year><year>2016</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> - The contents of this file are subject to the Erlang Public License, - Version 1.1, (the "License"); you may not use this file except in - compliance with the License. You should have received a copy of the - Erlang Public License along with this software. If not, it can be - retrieved online at http://www.erlang.org/. - - Software distributed under the License is distributed on an "AS IS" - basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See - the License for the specific language governing rights and limitations - under the License. + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. </legalnotice> @@ -30,6 +31,1055 @@ </header> <p>This document describes the changes made to the Kernel application.</p> +<section><title>Kernel 5.0</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p>The handling of <c>on_load</c> functions has been + improved. The major improvement is that if a code upgrade + fails because the <c>on_load</c> function fails, the + previous version of the module will now be retained.</p> + <p> + Own Id: OTP-12593</p> + </item> + <item> + <p><c>rpc:call()</c> and <c>rpc:block_call()</c> would + sometimes cause an exception (which was not mentioned in + the documentation). This has been corrected so that + <c>{badrpc,Reason}</c> will be returned instead.</p> + <p> + Own Id: OTP-13409</p> + </item> + <item> + <p>On Windows, for modules that were loaded early (such + as the <c>lists</c> module), <c>code:which/1</c> would + return the path with mixed slashes and backslashes, for + example: <c>"C:\\Program + Files\\erl8.0/lib/stdlib-2.7/ebin/lists.beam"</c>. This + has been corrected.</p> + <p> + Own Id: OTP-13410</p> + </item> + <item> + <p> + Make file:datasync use fsync instead of fdatasync on Mac + OSX.</p> + <p> + Own Id: OTP-13411</p> + </item> + <item> + <p> + The default chunk size for the fallback sendfile + implementation, used on platforms that do not have a + native sendfile, has been decreased in order to reduce + connectivity issues.</p> + <p> + Own Id: OTP-13444</p> + </item> + <item> + <p> + Large file writes (2Gb or more) could fail on some Unix + platforms (for example, OS X and FreeBSD).</p> + <p> + Own Id: OTP-13461</p> + </item> + <item> + <p> + A bug has been fixed where the DNS resolver inet_res did + not refresh its view of the contents of for example + resolv.conf immediately after start and hence then failed + name resolution. Reported and fix suggested by Michal + Ptaszek in GitHUB pull req #949.</p> + <p> + Own Id: OTP-13470 Aux Id: Pull #969 </p> + </item> + <item> + <p> + Fix process leak from global_group.</p> + <p> + Own Id: OTP-13516 Aux Id: PR-1008 </p> + </item> + <item> + <p> + The function <c>inet:gethostbyname/1</c> now honors the + resolver option <c>inet6</c> instead of always looking up + IPv4 addresses.</p> + <p> + *** POTENTIAL INCOMPATIBILITY ***</p> + <p> + Own Id: OTP-13622 Aux Id: PR-1065 </p> + </item> + <item> + <p> + The <c>Status</c> argument to <c>init:stop/1</c> is now + sanity checked to make sure <c>erlang:halt</c> does not + fail.</p> + <p> + Own Id: OTP-13631 Aux Id: PR-911 </p> + </item> + </list> + </section> + + + <section><title>Improvements and New Features</title> + <list> + <item> + <p> + Add {line_delim, byte()} option to inet:setopts/2 and + decode_packet/3</p> + <p> + Own Id: OTP-12837</p> + </item> + <item> + <p> + Added <seealso + marker="kernel:os#perf_counter/1">os:perf_counter/1</seealso>.</p> + <p> + The perf_counter is a very very cheap and high resolution + timer that can be used to timestamp system events. It + does not have monoticity guarantees, but should on most + OS's expose a monotonous time.</p> + <p> + Own Id: OTP-12908</p> + </item> + <item> + <p> + The os:cmd call has been optimized on unix platforms to + be scale better with the number of schedulers.</p> + <p> + Own Id: OTP-13089</p> + </item> + <item> + <p>New functions that can load multiple modules at once + have been added to the '<c>code</c>' module. The + functions are <c>code:atomic_load/1</c>, + <c>code:prepare_loading/1</c>, + <c>code:finish_loading/1</c>, and + <c>code:ensure_modules_loaded/1</c>.</p> + <p> + Own Id: OTP-13111</p> + </item> + <item> + <p> + The code path cache feature turned out not to be very + useful in practice and has been removed. If an attempt is + made to enable the code path cache, there will be a + warning report informing the user that the feature has + been removed.</p> + <p> + Own Id: OTP-13191</p> + </item> + <item> + <p>When an attempt is made to start a distributed Erlang + node with the same name as an existing node, the error + message will be much shorter and easier to read than + before. Example:</p> + <p><c>Protocol 'inet_tcp': the name somename@somehost + seems to be in use by another Erlang node</c></p> + <p> + Own Id: OTP-13294</p> + </item> + <item> + <p> + The output of the default error logger is somewhat + prettier and easier to read. The default error logger is + used during start-up of the OTP system. If the start-up + fails, the output will be easier to read.</p> + <p> + Own Id: OTP-13325</p> + </item> + <item> + <p>The functions <c>rpc:safe_multi_server_call/2,3</c> + that were deprecated in R12B have been removed.</p> + <p> + *** POTENTIAL INCOMPATIBILITY ***</p> + <p> + Own Id: OTP-13449</p> + </item> + <item> + <p> + Update the error reasons in dist_util, and show them in + the logs if net_kernel:verbose(1) has been called.</p> + <p> + Own Id: OTP-13458</p> + </item> + <item> + <p> + Experimental support for Unix Domain Sockets has been + implemented. Read the sources if you want to try it out. + Example: <c>gen_udp:open(0, + [{ifaddr,{local,"/tmp/socket"}}])</c>. Documentation will + be written after user feedback on the experimental API.</p> + <p> + Own Id: OTP-13572 Aux Id: PR-612 </p> + </item> + <item> + <p> + Allow heart to be configured to not kill the previous + emulator before calling the HEART_COMMAND. This is done + by setting the environment variable HEART_NO_KILL to + TRUE.</p> + <p> + Own Id: OTP-13650</p> + </item> + </list> + </section> + +</section> + +<section><title>Kernel 4.2</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p><c>code:load_abs([10100])</c> would bring down the + entire runtime system and create a crash dump. Corrected + to generate an error exception in the calling + process.</p> + <p>Also corrected specs for code loading functions and + added more information in the documentation about the + error reasons returned by code-loading functions.</p> + <p> + Own Id: OTP-9375</p> + </item> + <item> + <p> + <seealso + marker="kernel:gen_tcp#accept/2"><c>gen_tcp:accept/2</c></seealso> + was not <seealso + marker="erts:time_correction#Time_Warp_Safe_Code">time + warp safe</seealso>. This since it used the same time as + returned by <seealso + marker="erts:erlang#now/0"><c>erlang:now/0</c></seealso> + when calculating timeout. This has now been fixed.</p> + <p> + Own Id: OTP-13254 Aux Id: OTP-11997, OTP-13222 </p> + </item> + <item> + <p> Correct the contract for <c>inet:getifaddrs/1</c>. + </p> + <p> + Own Id: OTP-13335 Aux Id: ERL-95 </p> + </item> + </list> + </section> + + + <section><title>Improvements and New Features</title> + <list> + <item> + <p> + Time warp safety improvements.</p> + <p> + Introduced the options <c>monotonic_timestamp</c>, and + <c>strict_monotonic_timestamp</c> to the trace, + sequential trace, and system profile functionality. This + since the already existing <c>timestamp</c> option is not + time warp safe.</p> + <p> + Introduced the option <c>safe_fixed_monotonic_time</c> to + <c>ets:info/2</c> and <c>dets:info/2</c>. This since the + already existing <c>safe_fixed</c> option is not time + warp safe.</p> + <p> + Own Id: OTP-13222 Aux Id: OTP-11997 </p> + </item> + <item> + <p> + Add validation callback for heart</p> + <p> + The erlang heart process may now have a validation + callback installed. The validation callback will be + executed, if present, before any heartbeat to heart port + program. If the validation fails, or stalls, no heartbeat + will be sent and the node will go down.</p> + <p> + With the option <c>'check_schedulers'</c> heart executes + a responsiveness check of the schedulers before a + heartbeat is sent to the port program. If the + responsiveness check fails, the heartbeat will not be + performed (as intended).</p> + <p> + Own Id: OTP-13250</p> + </item> + <item> + <p> + Clarify documentation of <c>net_kernel:allow/1</c></p> + <p> + Own Id: OTP-13299</p> + </item> + <item> + <p> + EPMD supports both IPv4 and IPv6</p> + <p> + Also affects oldest supported windows version.</p> + <p> + Own Id: OTP-13364</p> + </item> + </list> + </section> + +</section> + +<section><title>Kernel 4.1.1</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + Host name lookups though inet_res, the Erlang DNS + resolver, are now done case insensitively according to + RFC 4343. Patch by Holger Weiß.</p> + <p> + Own Id: OTP-12836</p> + </item> + <item> + <p> + IPv6 distribution handler has been updated to share code + with IPv4 so that all features are supported in IPv6 as + well. A bug when using an IPv4 address as hostname has + been fixed.</p> + <p> + Own Id: OTP-13040</p> + </item> + <item> + <p> + Caching of host names in the internal DNS resolver + inet_res has been made character case insensitive for + host names according to RFC 4343.</p> + <p> + Own Id: OTP-13083</p> + </item> + <item> + <p>Cooked file mode buffering has been fixed so + file:position/2 now works according to Posix on Posix + systems i.e. when file:position/2 returns an error the + file pointer is unaffected.</p> <p>The Windows system + documentation, however, is unclear on this point so the + documentation of file:position/2 still does not promise + anything.</p> <p>Cooked file mode file:pread/2,3 and + file:pwrite/2,3 have been corrected to honor character + encoding like the combination of file:position/2 and + file:read/2 or file:write/2 already does. This is + probably not very useful since the character + representation on the caller's side is latin1, + period.</p> + <p> + Own Id: OTP-13155 Aux Id: PR#646 </p> + </item> + </list> + </section> + + + <section><title>Improvements and New Features</title> + <list> + <item> + <p> + Add {line_delim, byte()} option to inet:setopts/2 and + decode_packet/3</p> + <p> + Own Id: OTP-12837</p> + </item> + </list> + </section> + +</section> + +<section><title>Kernel 4.1</title> + + <section><title>Improvements and New Features</title> + <list> + <item> + <p>A mechanism for limiting the amount of text that the + built-in error logger events will produce has been + introduced. It is useful for limiting both the size of + log files and the CPU time used to produce them.</p> + <p>This mechanism is experimental in the sense that it + may be changed if it turns out that it does not solve the + problem it is supposed to solve. In that case, there may + be backward incompatible improvements to this + mechanism.</p> + <p>See the documentation for the config parameter + <c>error_logger_format_depth</c> in the Kernel + application for information about how to turn on this + feature.</p> + <p> + Own Id: OTP-12864</p> + </item> + </list> + </section> + +</section> + +<section><title>Kernel 4.0</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + Fix error handling in <c>file:read_line/1</c> for Unicode + contents.</p> + <p> + Own Id: OTP-12144</p> + </item> + <item> + <p> + Introduce <c>os:getenv/2</c> which is similar to + <c>os:getenv/1</c> but returns the passed default value + if the required environment variable is undefined.</p> + <p> + Own Id: OTP-12342</p> + </item> + <item> + <p> + It is now possible to paste text in JCL mode (using + Ctrl-Y) that has been copied in the previous shell + session. Also a bug that caused the JCL mode to crash + when pasting text has been fixed.</p> + <p> + Own Id: OTP-12673</p> + </item> + <item> + <p> + Ensure that each segment of an IPv6 address when parsed + from a string has a maximum of 4 hex digits</p> + <p> + Own Id: OTP-12773</p> + </item> + </list> + </section> + + + <section><title>Improvements and New Features</title> + <list> + <item> + <p> + New BIF: <c>erlang:get_keys/0</c>, lists all keys + associated with the process dictionary. Note: + <c>erlang:get_keys/0</c> is auto-imported.</p> + <p> + *** POTENTIAL INCOMPATIBILITY ***</p> + <p> + Own Id: OTP-12151 Aux Id: seq12521 </p> + </item> + <item> + <p> + The internal group to user_drv protocol has been changed + to be synchronous in order to guarantee that output sent + to a process implementing the user_drv protocol is + printed before replying. This protocol is used by the + standard_output device and the ssh application when + acting as a client. </p> + <p> + This change changes the previous unlimited buffer when + printing to standard_io and other devices that end up in + user_drv to 1KB.</p> + <p> + *** POTENTIAL INCOMPATIBILITY ***</p> + <p> + Own Id: OTP-12240</p> + </item> + <item> + <p>The <c>inflateInit/2</c> and <c>deflateInit/6</c> + functions now accepts a WindowBits argument equal to 8 + and -8.</p> + <p> + Own Id: OTP-12564</p> + </item> + <item> + <p> + Map error logger warnings to warning messages by default.</p> + <p> + Own Id: OTP-12755</p> + </item> + <item> + <p> + Map beam error logger warnings to warning messages by + default. Previously these messages were mapped to the + error channel by default.</p> + <p> + Own Id: OTP-12781</p> + </item> + <item> + <p> + gen_tcp:shutdown/2 is now asynchronous</p> + <p> + This solves the following problems with the old + implementation:</p> + <p> + It doesn't block when the TCP peer is idle or slow. This + is the expected behaviour when shutdown() is called: the + caller needs to be able to continue reading from the + socket, not be prevented from doing so.</p> + <p> + It doesn't truncate the output. The current version of + gen_tcp:shutdown/2 will truncate any outbound data in the + driver queue after about 10 seconds if the TCP peer is + idle of slow. Worse yet, it doesn't even inform anyone + that the data has been truncated: 'ok' is returned to the + caller; and a FIN rather than an RST is sent to the TCP + peer.</p> + <p> + *** POTENTIAL INCOMPATIBILITY ***</p> + <p> + Own Id: OTP-12797</p> + </item> + <item> + <p> + There are many cases where user code needs to be able to + distinguish between a socket that was closed normally and + one that was aborted. Setting the option + {show_econnreset, true} enables the user to receive + ECONNRESET errors on both active and passive sockets.</p> + <p> + Own Id: OTP-12843</p> + </item> + </list> + </section> + +</section> + +<section><title>Kernel 3.2.0.1</title> + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p>The 'raw' socket option could not be used multiple times + in one call to any e.g gen_tcp function because only one + of the occurrences were used. This bug has been fixed, + and also a small bug concerning propagating error codes + from within inet:setopts/2.</p> + <p>Own Id: OTP-11482 Aux Id: seq12872 </p> + </item> + </list> + </section> + </section> + + +<section><title>Kernel 3.2</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + A bug causing an infinite loop in hostname resolving has + been corrected. To trigger this bug you would have to + enter an bogus search method from a configuration file + e.g .inetrc.</p> + <p> + Bug pinpointed by Emil Holmström</p> + <p> + Own Id: OTP-12133</p> + </item> + <item> + <p> + The standard_error process now handles the getopts I/O + protocol request correctly and stores its encoding in the + same way as standard_io.</p> + <p> + Also, io:put_chars(standard_error, [oops]) could + previously crash the standard_error process. This is now + corrected.</p> + <p> + Own Id: OTP-12424</p> + </item> + </list> + </section> + + + <section><title>Improvements and New Features</title> + <list> + <item> + <p> + Configuration parameters for the Kernel application that + allows setting socket options for the distribution + sockets have been added. See the application Kernel + documentation; parameters 'inet_dist_listen_options' and + 'inet_dist_connect_options'.</p> + <p> + Own Id: OTP-12476 Aux Id: OTP-12476 </p> + </item> + </list> + </section> + +</section> + +<section><title>Kernel 3.1</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + Make sure to install .hrl files when needed</p> + <p> + Own Id: OTP-12197</p> + </item> + <item> + <p> + Removed the undocumented application environment variable + 'raw_files' from the kernel application. This variable + was checked (by call to application:get_env/2) each time + a raw file was to be opened in the file module.</p> + <p> + Own Id: OTP-12276</p> + </item> + <item> + <p> + A bug has been fixed when using the netns option to + gen_udp, which accidentally only worked if it was the + last option.</p> + <p> + Own Id: OTP-12314</p> + </item> + </list> + </section> + + + <section><title>Improvements and New Features</title> + <list> + <item> + <p> + Updated documentation for inet buffer size options.</p> + <p> + Own Id: OTP-12296</p> + </item> + <item> + <p> + Introduce new option 'raw' in file_info and link_info + functions. This option allows the caller not to go + through the file server for information about files + guaranteed to be local.</p> + <p> + Own Id: OTP-12325</p> + </item> + </list> + </section> + +</section> + +<section><title>Kernel 3.0.3</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + Accept inet:ip_address() in net_adm:names/1</p> + <p> + Own Id: OTP-12154</p> + </item> + </list> + </section> + +</section> + +<section><title>Kernel 3.0.2</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + OTP-11850 fixed filelib:wildcard/1 to work with broken + symlinks. This correction, however, introduced problems + since symlinks were no longer followed for functions like + filelib:ensure_dir/1, filelib:is_dir/1, + filelib:file_size/1, etc. This is now corrected.</p> + <p> + Own Id: OTP-12054 Aux Id: seq12660 </p> + </item> + </list> + </section> + +</section> + +<section><title>Kernel 3.0.1</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + If the Config given to + application_controller:change_application_data included + other config files, it was only expanded for already + existing (loaded) applications. If an upgrade added a new + application which had config data in an included config + file, the new application did not get correct config + data.</p> + <p> + This is now changed so config data will be expanded for + all applications.</p> + <p> + Own Id: OTP-11864</p> + </item> + <item> + <p>It was allowed to re-load pre-loaded modules such as + <c>erlang</c>, but that could cause strange and unwanted + things to happen, such as call <c>apply/3</c> to loop. + Pre-loaded modules are now sticky by default. (Thanks to + Loïc Hoguin for reporting this bug.)</p> + <p><c>code:add_path("/ending/in/slash/")</c> removes the + trailing slash, adding <c>/ending/in/slash</c> to the + code path. However, + <c>code:del_path("/ending/in/slash/")</c> would fail to + remove the path since it did not remove the trailing + slash. This has been fixed.</p> + <p> + Own Id: OTP-11913</p> + </item> + <item> + <p> + Fix erts_debug:size/1 to handle Map sizes</p> + <p> + Own Id: OTP-11923</p> + </item> + <item> + <p>The documentation for <c>file:file_info/1</c> has been + removed. The function itself was removed a long time + ago.</p> + <p> + Own Id: OTP-11982</p> + </item> + </list> + </section> + +</section> + +<section><title>Kernel 3.0</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + Fixed a deadlock possibility in terminate application</p> + <p> + Own Id: OTP-11171</p> + </item> + <item> + <p> + Fixed bug where sendfile would return the wrong error + code for a remotely closed socket if the socket was in + passive mode. (Thanks to Vincent Siliakus for reporting + the bug.)</p> + <p> + Own Id: OTP-11614</p> + </item> + <item> + <p> + The new option <c>persistent</c> is added to + <c>application:set_env/4</c> and + <c>application:unset_env/3</c>. An environment key set + with the <c>persistent</c> option will not be overridden + by the ones configured in the application resource file + on load. This means persistent values will stick after + the application is loaded and also on application reload. + (Thanks to José Valim)</p> + <p> + Own Id: OTP-11708</p> + </item> + <item> + <p> + The spec for file:set_cwd/1 is modified to also accept + binaries as arguments. This has always been allowed in + the code, but it was not reflected in the spec since + binaries are mostly used for raw file names. Raw file + names are names that are not encoded according to + file:native_name_encoding(), and these are not allowed in + file:set_cwd/1. The spec is now, however, more allowing + in order to avoid unnecessary dialyzer warnings. Raw file + names will still fail in runtime with reason + 'no_translation'. (Thanks to José Valim)</p> + <p> + Own Id: OTP-11787</p> + </item> + </list> + </section> + + <section><title>Improvements and New Features</title> + <list> + <item> + <p> + heart:set_cmd/1 is updated to allow unicode code points > + 255 in the given heart command</p> + <p> + Own Id: OTP-10843</p> + </item> + <item> + <p> Dialyzer's <c>unmatched_return</c> warnings have been + corrected. </p> + <p> + Own Id: OTP-10908</p> + </item> + <item> + <p> + Make erlang:open_port/2 spawn and spawn_executable handle + unicode.</p> + <p> + Own Id: OTP-11105</p> + </item> + <item> + <p> + Erlang/OTP has been ported to the realtime operating + system OSE. The port supports both smp and non-smp + emulator. For details around the port and how to started + see the User's Guide in the ose application. </p> + <p> + Note that not all parts of Erlang/OTP has been ported. </p> + <p> + Notable things that work are: non-smp and smp emulators, + OSE signal interaction, crypto, asn1, run_erl/to_erl, + tcp, epmd, distribution and most if not all non-os + specific functionality of Erlang.</p> + <p> + Notable things that does not work are: udp/sctp, os_mon, + erl_interface, binding of schedulers.</p> + <p> + Own Id: OTP-11334</p> + </item> + <item> + <p> + Add the {active,N} socket option for TCP, UDP, and SCTP, + where N is an integer in the range -32768..32767, to + allow a caller to specify the number of data messages to + be delivered to the controlling process. Once the + socket's delivered message count either reaches 0 or is + explicitly set to 0 with inet:setopts/2 or by including + {active,0} as an option when the socket is created, the + socket transitions to passive ({active, false}) mode and + the socket's controlling process receives a message to + inform it of the transition. TCP sockets receive + {tcp_passive,Socket}, UDP sockets receive + {udp_passive,Socket} and SCTP sockets receive + {sctp_passive,Socket}. </p> + <p> + The socket's delivered message counter defaults to 0, but + it can be set using {active,N} via any gen_tcp, gen_udp, + or gen_sctp function that takes socket options as + arguments, or via inet:setopts/2. New N values are added + to the socket's current counter value, and negative + numbers can be used to reduce the counter value. + Specifying a number that would cause the socket's counter + value to go above 32767 causes an einval error. If a + negative number is specified such that the counter value + would become negative, the socket's counter value is set + to 0 and the socket transitions to passive mode. If the + counter value is already 0 and inet:setopts(Socket, + [{active,0}]) is specified, the counter value remains at + 0 but the appropriate passive mode transition message is + generated for the socket.</p> + <p> + Thanks to Steve Vinoski</p> + <p> + Own Id: OTP-11368</p> + </item> + <item> + <p> + A call to either the <c>garbage_collect/1</c> BIF or the + <c>check_process_code/2</c> BIF may trigger garbage + collection of another processes than the process calling + the BIF. The previous implementations performed these + kinds of garbage collections without considering the + internal state of the process being garbage collected. In + order to be able to more easily and more efficiently + implement yielding native code, these types of garbage + collections have been rewritten. A garbage collection + like this is now triggered by an asynchronous request + signal, the actual garbage collection is performed by the + process being garbage collected itself, and finalized by + a reply signal to the process issuing the request. Using + this approach processes can disable garbage collection + and yield without having to set up the heap in a state + that can be garbage collected.</p> + <p> + The <seealso + marker="erts:erlang#garbage_collect/2"><c>garbage_collect/2</c></seealso>, + and <seealso + marker="erts:erlang#check_process_code/3"><c>check_process_code/3</c></seealso> + BIFs have been introduced. Both taking an option list as + last argument. Using these, one can issue asynchronous + requests.</p> + <p> + <c>code:purge/1</c> and <c>code:soft_purge/1</c> have + been rewritten to utilize asynchronous + <c>check_process_code</c> requests in order to + parallelize work.</p> + <p> + Characteristics impact: A call to the + <c>garbage_collect/1</c> BIF or the + <c>check_process_code/2</c> BIF will normally take longer + time to complete while the system as a whole wont be as + much negatively effected by the operation as before. A + call to <c>code:purge/1</c> and <c>code:soft_purge/1</c> + may complete faster or slower depending on the state of + the system while the system as a whole wont be as much + negatively effected by the operation as before.</p> + <p> + Own Id: OTP-11388 Aux Id: OTP-11535, OTP-11648 </p> + </item> + <item> + <p> + Add sync option to file:open/2.</p> + <p> + The sync option adds the POSIX O_SYNC flag to the open + system call on platforms that support the flag or its + equivalent, e.g., FILE_FLAG_WRITE_THROUGH on Windows. For + platforms that don't support it, file:open/2 returns + {error, enotsup} if the sync option is passed in. Thank + to Steve Vinoski and Joseph Blomstedt</p> + <p> + Own Id: OTP-11498</p> + </item> + <item> + <p> The contract of <c>inet:ntoa/1</c> has been + corrected. </p> <p> Thanks to Max Treskin. </p> + <p> + Own Id: OTP-11730</p> + </item> + </list> + </section> +</section> + +<section><title>Kernel 2.16.4.1</title> + + <section><title>Known Bugs and Problems</title> + <list> + <item> + <p> + When using gen_tcp:connect and the <c>fd</c> option with + <c>port</c> and/or <c>ip</c>, the <c>port</c> and + <c>ip</c> options were ignored. This has been fixed so + that if <c>port</c> and/or <c>ip</c> is specified + together with <c>fd</c> a bind is requested for that + <c>fd</c>. If <c>port</c> and/or <c>ip</c> is not + specified bind will not be called.</p> + <p> + Own Id: OTP-12061</p> + </item> + </list> + </section> +</section> + +<section><title>Kernel 2.16.4</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + Fix the typespec for the inet:ifget/2 and inet:ifget/3 + return value. Thanks to Ali Sabil.</p> + <p> + Own Id: OTP-11377</p> + </item> + <item> + <p> + Fix various typos in erts, kernel and ssh. Thanks to + Martin Hässler.</p> + <p> + Own Id: OTP-11414</p> + </item> + <item> + <p> + Fix rpc multicall sample code. Thanks to Edwin Fine.</p> + <p> + Own Id: OTP-11471</p> + </item> + <item> + <p> + Under rare circumstances a process calling <seealso + marker="kernel:inet#close/1"><c>inet:close/1</c></seealso>, + <seealso + marker="kernel:gen_tcp#close/1"><c>gen_tcp:close/1</c></seealso>, + <seealso + marker="kernel:gen_udp#close/1"><c>gen_udp:close/1</c></seealso>, + or <seealso + marker="kernel:gen_sctp#close/1"><c>gen_sctp:close/1</c></seealso> + could hang in the call indefinitely.</p> + <p> + Own Id: OTP-11491</p> + </item> + </list> + </section> + + + <section><title>Improvements and New Features</title> + <list> + <item> + <p> + Add more SCTP errors as described in RFC 4960. Thanks to + Artem Teslenko.</p> + <p> + Own Id: OTP-11379</p> + </item> + <item> + <p> + Add new BIF os:unsetenv/1 which deletes an environment + variable. Thanks to Martin Hässler.</p> + <p> + Own Id: OTP-11446</p> + </item> + </list> + </section> + +</section> + +<section><title>Kernel 2.16.3</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + Fix indentation of User switch command help in Erlang + shell. Thanks to Sylvain Benner.</p> + <p> + Own Id: OTP-11209</p> + </item> + </list> + </section> + + + <section><title>Improvements and New Features</title> + <list> + <item> + <p> + The previous undocumented function ntoa/1 has been added + to inet docs and exported in the inet module.</p> + <p> + Own Id: OTP-10676 Aux Id: OTP-10314 </p> + </item> + <item> + <p> + Fix typo in abcast() function comment. Thanks to Johannes + Weissl.</p> + <p> + Own Id: OTP-11219</p> + </item> + <item> + <p> + Add application:ensure_all_started/1-2. Thanks to Fred + Hebert.</p> + <p> + Own Id: OTP-11250</p> + </item> + <item> + <p> + Make edlin understand a few important control keys. + Thanks to Stefan Zegenhagen.</p> + <p> + Own Id: OTP-11251</p> + </item> + <item> + <p> + Cleanup of hipe_unified_loader, eliminating uses of + is_subtype/2 in specs, change module-local void functions + to return 'ok' instead of [] and made sure there are no + dialyzer warnings with --Wunmatched_returns. Thanks to + Kostis Sagonas.</p> + <p> + Own Id: OTP-11301</p> + </item> + </list> + </section> + +</section> + <section><title>Kernel 2.16.2</title> <section><title>Fixed Bugs and Malfunctions</title> @@ -390,7 +1440,7 @@ <p> Fixed issue where using controlling_process/2 with self() as the second argument caused the port to leak if self() - crashes. (Thanks to Ricardo Catalinas Jim�nez)</p> + crashes. (Thanks to Ricardo Catalinas Jiménez)</p> <p> Own Id: OTP-10094</p> </item> @@ -532,13 +1582,13 @@ Various typographical errors corrected in documentation for the global, error_logger, etop, lists, ets and supervisor modules and in the c_portdriver and kernel_app - documentation. (Thanks to Ricardo Catalinas Jim�nez)</p> + documentation. (Thanks to Ricardo Catalinas Jiménez)</p> <p> Own Id: OTP-9987</p> </item> <item> <p> Fix returned error from gen_tcp:accept/1,2 when - running out of ports + running out of ports.</p> <p> The {error, enfile} return value is badly misleading and confusing for this case, since the Posix ENFILE errno @@ -547,7 +1597,7 @@ {error, system_limit}, which is consistent with e.g. various file(3) functions. inet:format_error/1 has also been updated to support system_limit in the same manner - as file:format_error/1. (Thanks to Per Hedeland)</p></p> + as file:format_error/1. (Thanks to Per Hedeland)</p> <p> Own Id: OTP-9990</p> </item> @@ -727,7 +1777,7 @@ Fixes net_kernel:get_net_ticktime() doc</p> <p> Adds missing description when `ignored' is returned. - (Thanks to Ricardo Catalinas Jim�nez )</p> + (Thanks to Ricardo Catalinas Jiménez )</p> <p> Own Id: OTP-9713</p> </item> @@ -742,7 +1792,6 @@ Own Id: OTP-9764</p> </item> <item> - <p> <list> <item><p>Correct callback spec in application module</p></item> <item><p>Refine warning about callback specs with extra ranges</p></item> <item><p>Cleanup @@ -753,7 +1802,7 @@ analysis</p></item> <item><p>Fix crash in Dialyzer</p></item> <item><p>Variable substitution was not generalizing any unknown variables.</p></item> - </list></p> + </list> <p> Own Id: OTP-9776</p> </item> @@ -913,7 +1962,7 @@ <item> <p> Fix typo in doc of rpc:pmap/3 (Thanks to Ricardo - Catalinas Jim�nez)</p> + Catalinas Jiménez)</p> <p> Own Id: OTP-9168</p> </item> |