diff options
Diffstat (limited to 'lib/kernel/src/user_drv.erl')
| -rw-r--r-- | lib/kernel/src/user_drv.erl | 158 |
1 files changed, 104 insertions, 54 deletions
diff --git a/lib/kernel/src/user_drv.erl b/lib/kernel/src/user_drv.erl index a91c23539d..ca3c53ff93 100644 --- a/lib/kernel/src/user_drv.erl +++ b/lib/kernel/src/user_drv.erl @@ -3,16 +3,17 @@ %% %% Copyright Ericsson AB 1996-2013. All Rights Reserved. %% -%% The contents of this file are subject to the Erlang Public License, -%% Version 1.1, (the "License"); you may not use this file except in -%% compliance with the License. You should have received a copy of the -%% Erlang Public License along with this software. If not, it can be -%% retrieved online at http://www.erlang.org/. -%% -%% Software distributed under the License is distributed on an "AS IS" -%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See -%% the License for the specific language governing rights and limitations -%% under the License. +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. %% %% %CopyrightEnd% %% @@ -29,6 +30,7 @@ -define(OP_INSC,2). -define(OP_DELC,3). -define(OP_BEEP,4). +-define(OP_PUTC_SYNC,5). % Control op -define(CTRL_OP_GET_WINSIZE,100). -define(CTRL_OP_GET_UNICODE_STATE,101). @@ -132,8 +134,9 @@ server1(Iport, Oport, Shell) -> flatten(io_lib:format("~ts\n", [erlang:system_info(system_version)]))}, Iport, Oport), + %% Enter the server loop. - server_loop(Iport, Oport, Curr, User, Gr). + server_loop(Iport, Oport, Curr, User, Gr, {false, queue:new()}). rem_sh_opts(Node) -> [{expand_fun,fun(B)-> rpc:call(Node,edlin_expand,expand,[B]) end}]. @@ -158,42 +161,41 @@ start_user() -> User end. -server_loop(Iport, Oport, User, Gr) -> +server_loop(Iport, Oport, User, Gr, IOQueue) -> Curr = gr_cur_pid(Gr), put(current_group, Curr), - server_loop(Iport, Oport, Curr, User, Gr). + server_loop(Iport, Oport, Curr, User, Gr, IOQueue). -server_loop(Iport, Oport, Curr, User, Gr) -> +server_loop(Iport, Oport, Curr, User, Gr, {Resp, IOQ} = IOQueue) -> receive {Iport,{data,Bs}} -> BsBin = list_to_binary(Bs), Unicode = unicode:characters_to_list(BsBin,utf8), - port_bytes(Unicode, Iport, Oport, Curr, User, Gr); + port_bytes(Unicode, Iport, Oport, Curr, User, Gr, IOQueue); {Iport,eof} -> Curr ! {self(),eof}, - server_loop(Iport, Oport, Curr, User, Gr); - {User,Req} -> % never block from user! - io_request(Req, Iport, Oport), - server_loop(Iport, Oport, Curr, User, Gr); - {Curr,tty_geometry} -> - Curr ! {self(),tty_geometry,get_tty_geometry(Iport)}, - server_loop(Iport, Oport, Curr, User, Gr); - {Curr,get_unicode_state} -> - Curr ! {self(),get_unicode_state,get_unicode_state(Iport)}, - server_loop(Iport, Oport, Curr, User, Gr); - {Curr,set_unicode_state, Bool} -> - Curr ! {self(),set_unicode_state,set_unicode_state(Iport,Bool)}, - server_loop(Iport, Oport, Curr, User, Gr); - {Curr,Req} -> - io_request(Req, Iport, Oport), - server_loop(Iport, Oport, Curr, User, Gr); + server_loop(Iport, Oport, Curr, User, Gr, IOQueue); + Req when element(1,Req) =:= User orelse element(1,Req) =:= Curr, + tuple_size(Req) =:= 2 orelse tuple_size(Req) =:= 3 -> + %% We match {User|Curr,_}|{User|Curr,_,_} + NewQ = handle_req(Req, Iport, Oport, IOQueue), + server_loop(Iport, Oport, Curr, User, Gr, NewQ); + {Oport,ok} -> + %% We get this ok from the port, in io_request we store + %% info about where to send reply at head of queue + {Origin,Reply} = Resp, + Origin ! {reply,Reply}, + NewQ = handle_req(next, Iport, Oport, {false, IOQ}), + server_loop(Iport, Oport, Curr, User, Gr, NewQ); {'EXIT',Iport,_R} -> - server_loop(Iport, Oport, Curr, User, Gr); + server_loop(Iport, Oport, Curr, User, Gr, IOQueue); {'EXIT',Oport,_R} -> - server_loop(Iport, Oport, Curr, User, Gr); + server_loop(Iport, Oport, Curr, User, Gr, IOQueue); + {'EXIT',User,shutdown} -> % force data to port + server_loop(Iport, Oport, Curr, User, Gr, IOQueue); {'EXIT',User,_R} -> % keep 'user' alive NewU = start_user(), - server_loop(Iport, Oport, Curr, NewU, gr_set_num(Gr, 1, NewU, {})); + server_loop(Iport, Oport, Curr, NewU, gr_set_num(Gr, 1, NewU, {}), IOQueue); {'EXIT',Pid,R} -> % shell and group leader exit case gr_cur_pid(Gr) of Pid when R =/= die , @@ -213,53 +215,88 @@ server_loop(Iport, Oport, Curr, User, Gr) -> {ok,Gr2} = gr_set_cur(gr_set_num(Gr1, Ix, Pid1, {shell,start,Params}), Ix), put(current_group, Pid1), - server_loop(Iport, Oport, Pid1, User, Gr2); + server_loop(Iport, Oport, Pid1, User, Gr2, IOQueue); _ -> % remote shell io_requests([{put_chars,unicode,"(^G to start new job) ***\n"}], Iport, Oport), - server_loop(Iport, Oport, Curr, User, Gr1) + server_loop(Iport, Oport, Curr, User, Gr1, IOQueue) end; _ -> % not current, just remove it - server_loop(Iport, Oport, Curr, User, gr_del_pid(Gr, Pid)) + server_loop(Iport, Oport, Curr, User, gr_del_pid(Gr, Pid), IOQueue) end; _X -> %% Ignore unknown messages. - server_loop(Iport, Oport, Curr, User, Gr) + server_loop(Iport, Oport, Curr, User, Gr, IOQueue) end. +%% We always handle geometry and unicode requests +handle_req({Curr,tty_geometry},Iport,_Oport,IOQueue) -> + Curr ! {self(),tty_geometry,get_tty_geometry(Iport)}, + IOQueue; +handle_req({Curr,get_unicode_state},Iport,_Oport,IOQueue) -> + Curr ! {self(),get_unicode_state,get_unicode_state(Iport)}, + IOQueue; +handle_req({Curr,set_unicode_state, Bool},Iport,_Oport,IOQueue) -> + Curr ! {self(),set_unicode_state,set_unicode_state(Iport,Bool)}, + IOQueue; +handle_req(next,Iport,Oport,{false,IOQ}=IOQueue) -> + case queue:out(IOQ) of + {empty,_} -> + IOQueue; + {{value,{Origin,Req}},ExecQ} -> + case io_request(Req, Iport, Oport) of + ok -> + handle_req(next,Iport,Oport,{false,ExecQ}); + Reply -> + {{Origin,Reply}, ExecQ} + end + end; +handle_req(Msg,Iport,Oport,{false,IOQ}=IOQueue) -> + empty = queue:peek(IOQ), + {Origin,Req} = Msg, + case io_request(Req, Iport, Oport) of + ok -> + IOQueue; + Reply -> + {{Origin,Reply}, IOQ} + end; +handle_req(Msg,_Iport,_Oport,{Resp, IOQ}) -> + %% All requests are queued when we have outstanding sync put_chars + {Resp, queue:in(Msg,IOQ)}. + %% port_bytes(Bytes, InPort, OutPort, CurrentProcess, UserProcess, Group) %% Check the Bytes from the port to see if it contains a ^G. If so, %% either escape to switch_loop or restart the shell. Otherwise send %% the bytes to Curr. -port_bytes([$\^G|_Bs], Iport, Oport, _Curr, User, Gr) -> - handle_escape(Iport, Oport, User, Gr); +port_bytes([$\^G|_Bs], Iport, Oport, _Curr, User, Gr, IOQueue) -> + handle_escape(Iport, Oport, User, Gr, IOQueue); -port_bytes([$\^C|_Bs], Iport, Oport, Curr, User, Gr) -> - interrupt_shell(Iport, Oport, Curr, User, Gr); +port_bytes([$\^C|_Bs], Iport, Oport, Curr, User, Gr, IOQueue) -> + interrupt_shell(Iport, Oport, Curr, User, Gr, IOQueue); -port_bytes([B], Iport, Oport, Curr, User, Gr) -> +port_bytes([B], Iport, Oport, Curr, User, Gr, IOQueue) -> Curr ! {self(),{data,[B]}}, - server_loop(Iport, Oport, Curr, User, Gr); -port_bytes(Bs, Iport, Oport, Curr, User, Gr) -> + server_loop(Iport, Oport, Curr, User, Gr, IOQueue); +port_bytes(Bs, Iport, Oport, Curr, User, Gr, IOQueue) -> case member($\^G, Bs) of true -> - handle_escape(Iport, Oport, User, Gr); + handle_escape(Iport, Oport, User, Gr, IOQueue); false -> Curr ! {self(),{data,Bs}}, - server_loop(Iport, Oport, Curr, User, Gr) + server_loop(Iport, Oport, Curr, User, Gr, IOQueue) end. -interrupt_shell(Iport, Oport, Curr, User, Gr) -> +interrupt_shell(Iport, Oport, Curr, User, Gr, IOQueue) -> case gr_get_info(Gr, Curr) of undefined -> ok; % unknown _ -> exit(Curr, interrupt) end, - server_loop(Iport, Oport, Curr, User, Gr). + server_loop(Iport, Oport, Curr, User, Gr, IOQueue). -handle_escape(Iport, Oport, User, Gr) -> +handle_escape(Iport, Oport, User, Gr, IOQueue) -> case application:get_env(stdlib, shell_esc) of {ok,abort} -> Pid = gr_cur_pid(Gr), @@ -278,11 +315,14 @@ handle_escape(Iport, Oport, User, Gr) -> Pid1 = group:start(self(), {shell,start,[]}), io_request({put_chars,unicode,"\n"}, Iport, Oport), server_loop(Iport, Oport, User, - gr_add_cur(Gr1, Pid1, {shell,start,[]})); + gr_add_cur(Gr1, Pid1, {shell,start,[]}), IOQueue); _ -> % {ok,jcl} | undefined io_request({put_chars,unicode,"\nUser switch command\n"}, Iport, Oport), - server_loop(Iport, Oport, User, switch_loop(Iport, Oport, Gr)) + %% init edlin used by switch command and have it copy the + %% text buffer from current group process + edlin:init(gr_cur_pid(Gr)), + server_loop(Iport, Oport, User, switch_loop(Iport, Oport, Gr), IOQueue) end. switch_loop(Iport, Oport, Gr) -> @@ -492,9 +532,12 @@ set_unicode_state(Iport, Bool) -> io_request(Request, Iport, Oport) -> try io_command(Request) of - Command -> + {command,_} = Command -> Oport ! {self(),Command}, - ok + ok; + {Command,Reply} -> + Oport ! {self(),Command}, + Reply catch {requests,Rs} -> io_requests(Rs, Iport, Oport); @@ -511,6 +554,13 @@ io_requests([], _Iport, _Oport) -> put_int16(N, Tail) -> [(N bsr 8)band 255,N band 255|Tail]. +%% When a put_chars_sync command is used, user_drv guarantees that +%% the bytes have been put in the buffer of the port before an acknowledgement +%% is sent back to the process sending the request. This command was added in +%% OTP 18 to make sure that data sent from io:format is actually printed +%% to the console before the vm stops when calling erlang:halt(integer()). +io_command({put_chars_sync, unicode,Cs,Reply}) -> + {{command,[?OP_PUTC_SYNC|unicode:characters_to_binary(Cs,utf8)]},Reply}; io_command({put_chars, unicode,Cs}) -> {command,[?OP_PUTC|unicode:characters_to_binary(Cs,utf8)]}; io_command({move_rel,N}) -> |