diff options
Diffstat (limited to 'lib/kernel/test/logger_std_h_SUITE.erl')
| -rw-r--r-- | lib/kernel/test/logger_std_h_SUITE.erl | 622 |
1 files changed, 351 insertions, 271 deletions
diff --git a/lib/kernel/test/logger_std_h_SUITE.erl b/lib/kernel/test/logger_std_h_SUITE.erl index 5764abd063..0930cd4211 100644 --- a/lib/kernel/test/logger_std_h_SUITE.erl +++ b/lib/kernel/test/logger_std_h_SUITE.erl @@ -45,17 +45,13 @@ -define(bin(Msg), list_to_binary(Msg++"\n")). -define(domain,#{domain=>[?MODULE]}). --define(FILESYNC_REP_INT, if is_atom(?FILESYNC_REPEAT_INTERVAL) -> 5500; - true -> ?FILESYNC_REPEAT_INTERVAL + 500 - end). - suite() -> [{timetrap,{seconds,30}}, {ct_hooks,[logger_test_lib]}]. init_per_suite(Config) -> timer:start(), % to avoid progress report - {ok,{logger_std_h,#{formatter:=OrigFormatter}}} = + {ok,#{formatter:=OrigFormatter}} = logger:get_handler_config(?STANDARD_HANDLER), [{formatter,OrigFormatter}|Config]. @@ -73,12 +69,25 @@ end_per_group(_Group, _Config) -> init_per_testcase(TestHooksCase, Config) when TestHooksCase == write_failure; TestHooksCase == sync_failure -> - if ?TEST_HOOKS_TAB == undefined -> + case (fun() -> ?TEST_HOOKS_TAB == undefined end)() of + true -> {skip,"Define the TEST_HOOKS macro to run this test"}; - true -> + false -> ct:print("********** ~w **********", [TestHooksCase]), Config end; +init_per_testcase(OPCase, Config) when + OPCase == qlen_kill_new; + OPCase == restart_after -> + case re:run(erlang:system_info(system_version), + "dirty-schedulers-TEST", + [{capture,none}]) of + match -> + {skip,"Overload protection test skipped on dirty-schedulers-TEST"}; + nomatch -> + ct:print("********** ~w **********", [OPCase]), + Config + end; init_per_testcase(TestCase, Config) -> ct:print("********** ~w **********", [TestCase]), Config. @@ -108,7 +117,7 @@ all() -> info_and_reset, reconfig, file_opts, - filesync, + sync, write_failure, sync_failure, op_switch_to_sync_file, @@ -132,7 +141,7 @@ all() -> add_remove_instance_tty(_Config) -> {error,{handler_not_added,{invalid_config,logger_std_h,{type,tty}}}} = logger:add_handler(?MODULE,logger_std_h, - #{logger_std_h => #{type => tty}, + #{config => #{type => tty}, filter_default=>log, formatter=>{?MODULE,self()}}), ok. @@ -166,33 +175,33 @@ add_remove_instance_file2(cleanup,_Config) -> add_remove_instance_file(Log, Type) -> ok = logger:add_handler(?MODULE, logger_std_h, - #{logger_std_h => #{type => Type}, + #{config => #{type => Type}, filter_default=>stop, filters=>?DEFAULT_HANDLER_FILTERS([?MODULE]), formatter=>{?MODULE,self()}}), - Pid = whereis(?MODULE), + Pid = whereis(h_proc_name()), true = is_pid(Pid), - logger:info(M1=?msg,?domain), + logger:notice(M1=?msg,?domain), ?check(M1), B1 = ?bin(M1), - try_read_file(Log, {ok,B1}, ?FILESYNC_REP_INT), + try_read_file(Log, {ok,B1}, filesync_rep_int()), ok = logger:remove_handler(?MODULE), timer:sleep(500), - undefined = whereis(?MODULE), - logger:info(?msg,?domain), + undefined = whereis(h_proc_name()), + logger:notice(?msg,?domain), ?check_no_log, - try_read_file(Log, {ok,B1}, ?FILESYNC_REP_INT), + try_read_file(Log, {ok,B1}, filesync_rep_int()), ok. default_formatter(_Config) -> ok = logger:set_handler_config(?STANDARD_HANDLER,formatter, {?DEFAULT_FORMATTER,?DEFAULT_FORMAT_CONFIG}), ct:capture_start(), - logger:info(M1=?msg), + logger:notice(M1=?msg), timer:sleep(100), ct:capture_stop(), [Msg] = ct:capture_get(), - match = re:run(Msg,"=INFO REPORT====.*\n"++M1,[{capture,none}]), + match = re:run(Msg,"=NOTICE REPORT====.*\n"++M1,[{capture,none}]), ok. errors(Config) -> @@ -212,20 +221,26 @@ errors(Config) -> {handler_not_added, {invalid_config,logger_std_h,{type,faulty_type}}}} = logger:add_handler(?MODULE,logger_std_h, - #{logger_std_h => #{type => faulty_type}}), + #{config => #{type => faulty_type}}), - NoDir = lists:concat(["/",?MODULE,"_dir"]), - {error, - {handler_not_added,{{open_failed,NoDir,eacces},_}}} = - logger:add_handler(myh2,logger_std_h, - #{logger_std_h=>#{type=>{file,NoDir}}}), + case os:type() of + {win32,_} -> + %% No use in testing file access on windows + ok; + _ -> + NoDir = lists:concat(["/",?MODULE,"_dir"]), + {error, + {handler_not_added,{{open_failed,NoDir,eacces},_}}} = + logger:add_handler(myh2,logger_std_h, + #{config=>#{type=>{file,NoDir}}}) + end, {error, {handler_not_added,{{open_failed,Log,_},_}}} = logger:add_handler(myh3,logger_std_h, - #{logger_std_h=>#{type=>{file,Log,[bad_file_opt]}}}), + #{config=>#{type=>{file,Log,[bad_file_opt]}}}), - ok = logger:info(?msg). + ok = logger:notice(?msg). errors(cleanup,_Config) -> logger:remove_handler(?MODULE). @@ -237,43 +252,40 @@ formatter_fail(Config) -> %% no formatter ok = logger:add_handler(?MODULE, logger_std_h, - #{logger_std_h => #{type => {file,Log}}, + #{config => #{type => {file,Log}}, filter_default=>stop, filters=>?DEFAULT_HANDLER_FILTERS([?MODULE])}), - Pid = whereis(?MODULE), + Pid = whereis(h_proc_name()), true = is_pid(Pid), - #{handlers:=HC1} = logger:i(), - H = [Id || {Id,_,_} <- HC1], + H = logger:get_handler_ids(), true = lists:member(?MODULE,H), %% Formatter is added automatically - {ok,{_,#{formatter:={logger_formatter,_}}}} = - logger:get_handler_config(?MODULE), - logger:info(M1=?msg,?domain), - Got1 = try_match_file(Log,"[0-9\\+\\-T:\\.]* info: "++M1,5000), + {ok,#{formatter:={logger_formatter,_}}} = logger:get_handler_config(?MODULE), + logger:notice(M1=?msg,?domain), + Got1 = try_match_file(Log,"[0-9\\+\\-T:\\.]* notice: "++M1,5000), ok = logger:set_handler_config(?MODULE,formatter,{nonexistingmodule,#{}}), - logger:info(M2=?msg,?domain), + logger:notice(M2=?msg,?domain), Got2 = try_match_file(Log, - escape(Got1)++"[0-9\\+\\-T:\\.]* info: FORMATTER CRASH: .*"++M2, + escape(Got1)++"[0-9\\+\\-T:\\.]* notice: FORMATTER CRASH: .*"++M2, 5000), ok = logger:set_handler_config(?MODULE,formatter,{?MODULE,crash}), - logger:info(M3=?msg,?domain), + logger:notice(M3=?msg,?domain), Got3 = try_match_file(Log, - escape(Got2)++"[0-9\\+\\-T:\\.]* info: FORMATTER CRASH: .*"++M3, + escape(Got2)++"[0-9\\+\\-T:\\.]* notice: FORMATTER CRASH: .*"++M3, 5000), ok = logger:set_handler_config(?MODULE,formatter,{?MODULE,bad_return}), - logger:info(?msg,?domain), + logger:notice(?msg,?domain), try_match_file(Log, escape(Got3)++"FORMATTER ERROR: bad_return_value", 5000), %% Check that handler is still alive and was never dead - Pid = whereis(?MODULE), - #{handlers:=HC2} = logger:i(), - H = [Id || {Id,_,_} <- HC2], + Pid = whereis(h_proc_name()), + H = logger:get_handler_ids(), ok. @@ -283,41 +295,41 @@ formatter_fail(cleanup,_Config) -> config_fail(_Config) -> {error,{handler_not_added,{invalid_config,logger_std_h,{bad,bad}}}} = logger:add_handler(?MODULE,logger_std_h, - #{logger_std_h => #{bad => bad}, + #{config => #{bad => bad}, filter_default=>log, formatter=>{?MODULE,self()}}), {error,{handler_not_added,{invalid_config,logger_std_h, {restart_type,bad}}}} = logger:add_handler(?MODULE,logger_std_h, - #{logger_std_h => #{restart_type => bad}, + #{config => #{restart_type => bad}, filter_default=>log, formatter=>{?MODULE,self()}}), {error,{handler_not_added,{invalid_levels,{_,1,_}}}} = logger:add_handler(?MODULE,logger_std_h, - #{logger_std_h => #{drop_new_reqs_qlen=>1}}), + #{config => #{drop_mode_qlen=>1}}), {error,{handler_not_added,{invalid_levels,{43,42,_}}}} = logger:add_handler(?MODULE,logger_std_h, - #{logger_std_h => #{toggle_sync_qlen=>43, - drop_new_reqs_qlen=>42}}), + #{config => #{sync_mode_qlen=>43, + drop_mode_qlen=>42}}), {error,{handler_not_added,{invalid_levels,{_,43,42}}}} = logger:add_handler(?MODULE,logger_std_h, - #{logger_std_h => #{drop_new_reqs_qlen=>43, - flush_reqs_qlen=>42}}), + #{config => #{drop_mode_qlen=>43, + flush_qlen=>42}}), ok = logger:add_handler(?MODULE,logger_std_h, #{filter_default=>log, formatter=>{?MODULE,self()}}), {error,{illegal_config_change,_,_}} = - logger:set_handler_config(?MODULE,logger_std_h, + logger:set_handler_config(?MODULE,config, #{type=>{file,"file"}}), {error,{illegal_config_change,_,_}} = logger:set_handler_config(?MODULE,id,bad), {error,{invalid_levels,_}} = - logger:set_handler_config(?MODULE,logger_std_h, - #{toggle_sync_qlen=>100, - flush_reqs_qlen=>99}), + logger:set_handler_config(?MODULE,config, + #{sync_mode_qlen=>100, + flush_qlen=>99}), {error,{invalid_config,logger_std_h,{filesync_rep_int,2000}}} = - logger:set_handler_config(?MODULE, logger_std_h, + logger:set_handler_config(?MODULE, config, #{filesync_rep_int => 2000}), ok. @@ -329,7 +341,7 @@ crash_std_h_to_file(Config) -> Log = filename:join(Dir,lists:concat([?MODULE,"_",?FUNCTION_NAME,".log"])), crash_std_h(Config,?FUNCTION_NAME, [{handler,default,logger_std_h, - #{ logger_std_h => #{ type => {file, Log} }}}], + #{ config => #{ type => {file, Log} }}}], file, Log). crash_std_h_to_file(cleanup,_Config) -> crash_std_h(cleanup). @@ -339,7 +351,7 @@ crash_std_h_to_disk_log(Config) -> Log = filename:join(Dir,lists:concat([?MODULE,"_",?FUNCTION_NAME,".log"])), crash_std_h(Config,?FUNCTION_NAME, [{handler,default,logger_disk_log_h, - #{ disk_log_opts => #{ file => Log }}}], + #{ config => #{ file => Log }}}], disk_log,Log). crash_std_h_to_disk_log(cleanup,_Config) -> crash_std_h(cleanup). @@ -354,7 +366,12 @@ crash_std_h(Config,Func,Var,Type,Log) -> ct:pal("Starting ~p with ~tp", [Name,Args]), %% Start a node which prints kernel logs to the destination specified by Type {ok,Node} = test_server:start_node(Name, peer, [{args, Args}]), - Pid = rpc:call(Node,erlang,whereis,[?STANDARD_HANDLER]), + HProcName = + case Type of + file -> ?name_to_reg_name(logger_std_h,?STANDARD_HANDLER); + disk_log -> ?name_to_reg_name(logger_disk_log_h,?STANDARD_HANDLER) + end, + Pid = rpc:call(Node,erlang,whereis,[HProcName]), ok = rpc:call(Node,logger,set_handler_config,[?STANDARD_HANDLER,formatter, {?MODULE,self()}]), ok = log_on_remote_node(Node,"dummy1"), @@ -367,7 +384,7 @@ crash_std_h(Config,Func,Var,Type,Log) -> %% Wait a bit, then check that it is gone timer:sleep(2000), - undefined = rpc:call(Node,erlang,whereis,[?STANDARD_HANDLER]), + undefined = rpc:call(Node,erlang,whereis,[HProcName]), %% Check that file is not empty {ok,Bin2} = sync_and_read(Node,Type,Log), @@ -381,7 +398,7 @@ crash_std_h(Config,Func,Var,Type,Log) -> log_on_remote_node(Node,Msg) -> _ = spawn_link(Node, fun() -> erlang:group_leader(whereis(user),self()), - logger:info(Msg) + logger:notice(Msg) end), ok. @@ -391,7 +408,7 @@ crash_std_h(cleanup) -> [test_server:stop_node(Node) || Node <- Nodes]. sync_and_read(Node,disk_log,Log) -> - rpc:call(Node,logger_disk_log_h,disk_log_sync,[?STANDARD_HANDLER]), + rpc:call(Node,logger_disk_log_h,filesync,[?STANDARD_HANDLER]), case file:read_file(Log ++ ".1") of {ok,<<>>} -> timer:sleep(5000), @@ -423,51 +440,51 @@ reconfig(Config) -> Dir = ?config(priv_dir,Config), ok = logger:add_handler(?MODULE, logger_std_h, - #{logger_std_h => #{type => standard_io}, + #{config => #{type => standard_io}, filter_default=>log, filters=>?DEFAULT_HANDLER_FILTERS([?MODULE]), formatter=>{?MODULE,self()}}), #{id := ?MODULE, type := standard_io, file_ctrl_pid := FileCtrlPid, - toggle_sync_qlen := ?TOGGLE_SYNC_QLEN, - drop_new_reqs_qlen := ?DROP_NEW_REQS_QLEN, - flush_reqs_qlen := ?FLUSH_REQS_QLEN, - enable_burst_limit := ?ENABLE_BURST_LIMIT, - burst_limit_size := ?BURST_LIMIT_SIZE, - burst_window_time := ?BURST_WINDOW_TIME, - enable_kill_overloaded := ?ENABLE_KILL_OVERLOADED, - handler_overloaded_qlen := ?HANDLER_OVERLOADED_QLEN, - handler_overloaded_mem := ?HANDLER_OVERLOADED_MEM, - handler_restart_after := ?HANDLER_RESTART_AFTER, + sync_mode_qlen := ?SYNC_MODE_QLEN, + drop_mode_qlen := ?DROP_MODE_QLEN, + flush_qlen := ?FLUSH_QLEN, + burst_limit_enable := ?BURST_LIMIT_ENABLE, + burst_limit_max_count := ?BURST_LIMIT_MAX_COUNT, + burst_limit_window_time := ?BURST_LIMIT_WINDOW_TIME, + overload_kill_enable := ?OVERLOAD_KILL_ENABLE, + overload_kill_qlen := ?OVERLOAD_KILL_QLEN, + overload_kill_mem_size := ?OVERLOAD_KILL_MEM_SIZE, + overload_kill_restart_after := ?OVERLOAD_KILL_RESTART_AFTER, filesync_repeat_interval := ?FILESYNC_REPEAT_INTERVAL} = logger_std_h:info(?MODULE), - ok = logger:set_handler_config(?MODULE, logger_std_h, - #{toggle_sync_qlen => 1, - drop_new_reqs_qlen => 2, - flush_reqs_qlen => 3, - enable_burst_limit => false, - burst_limit_size => 10, - burst_window_time => 10, - enable_kill_overloaded => true, - handler_overloaded_qlen => 100000, - handler_overloaded_mem => 10000000, - handler_restart_after => never, + ok = logger:set_handler_config(?MODULE, config, + #{sync_mode_qlen => 1, + drop_mode_qlen => 2, + flush_qlen => 3, + burst_limit_enable => false, + burst_limit_max_count => 10, + burst_limit_window_time => 10, + overload_kill_enable => true, + overload_kill_qlen => 100000, + overload_kill_mem_size => 10000000, + overload_kill_restart_after => infinity, filesync_repeat_interval => no_repeat}), #{id := ?MODULE, type := standard_io, file_ctrl_pid := FileCtrlPid, - toggle_sync_qlen := 1, - drop_new_reqs_qlen := 2, - flush_reqs_qlen := 3, - enable_burst_limit := false, - burst_limit_size := 10, - burst_window_time := 10, - enable_kill_overloaded := true, - handler_overloaded_qlen := 100000, - handler_overloaded_mem := 10000000, - handler_restart_after := never, + sync_mode_qlen := 1, + drop_mode_qlen := 2, + flush_qlen := 3, + burst_limit_enable := false, + burst_limit_max_count := 10, + burst_limit_window_time := 10, + overload_kill_enable := true, + overload_kill_qlen := 100000, + overload_kill_mem_size := 10000000, + overload_kill_restart_after := infinity, filesync_repeat_interval := no_repeat} = logger_std_h:info(?MODULE), ok. @@ -482,34 +499,34 @@ file_opts(Config) -> BadType = {file,Log,BadFileOpts}, {error,{handler_not_added,{{open_failed,Log,enoent},_}}} = logger:add_handler(?MODULE, logger_std_h, - #{logger_std_h => #{type => BadType}}), + #{config => #{type => BadType}}), OkFileOpts = [raw,append], OkType = {file,Log,OkFileOpts}, ok = logger:add_handler(?MODULE, logger_std_h, - #{logger_std_h => #{type => OkType}, + #{config => #{type => OkType}, filter_default=>log, filters=>?DEFAULT_HANDLER_FILTERS([?MODULE]), formatter=>{?MODULE,self()}}), #{type := OkType} = logger_std_h:info(?MODULE), - logger:info(M1=?msg,?domain), + logger:notice(M1=?msg,?domain), ?check(M1), B1 = ?bin(M1), - try_read_file(Log, {ok,B1}, ?FILESYNC_REP_INT), + try_read_file(Log, {ok,B1}, filesync_rep_int()), ok. file_opts(cleanup, _Config) -> logger:remove_handler(?MODULE). -filesync(Config) -> +sync(Config) -> Dir = ?config(priv_dir,Config), Log = filename:join(Dir, lists:concat([?FUNCTION_NAME,".log"])), Type = {file,Log}, ok = logger:add_handler(?MODULE, logger_std_h, - #{logger_std_h => #{type => Type}, + #{config => #{type => Type}, filter_default=>log, filters=>?DEFAULT_HANDLER_FILTERS([?MODULE]), formatter=>{?MODULE,nl}}), @@ -522,9 +539,9 @@ filesync(Config) -> {logger_std_h, sync_dev}, {file,datasync}]), - logger:info("first", ?domain), + logger:notice("first", ?domain), %% wait for automatic filesync - check_tracer(?FILESYNC_REP_INT*2), + check_tracer(filesync_rep_int()*2), %% check that explicit filesync is only done once start_tracer([{logger_std_h, write_to_dev, 5}, @@ -535,16 +552,16 @@ filesync(Config) -> {file,datasync}, {no_more,500} ]), - logger:info("second", ?domain), - %% do explicit filesync + logger:notice("second", ?domain), + %% do explicit sync logger_std_h:filesync(?MODULE), - %% a second filesync should be ignored + %% a second sync should be ignored logger_std_h:filesync(?MODULE), check_tracer(100), %% check that if there's no repeated filesync active, %% a filesync is still performed when handler goes idle - logger:set_handler_config(?MODULE, logger_std_h, + logger:set_handler_config(?MODULE, config, #{filesync_repeat_interval => no_repeat}), no_repeat = maps:get(filesync_repeat_interval, logger_std_h:info(?MODULE)), %% The following timer is to make sure the time from last log @@ -560,10 +577,10 @@ filesync(Config) -> {logger_std_h, write_to_dev, <<"fourth\n">>}, {logger_std_h, sync_dev}, {file,datasync}]), - logger:info("third", ?domain), + logger:notice("third", ?domain), %% wait for automatic filesync timer:sleep(?IDLE_DETECT_TIME_MSEC*2), - logger:info("fourth", ?domain), + logger:notice("fourth", ?domain), %% wait for automatic filesync check_tracer(?IDLE_DETECT_TIME_MSEC*2), @@ -575,15 +592,15 @@ filesync(Config) -> start_tracer([{logger_std_h,handle_cast,2}], [OneSync || _ <- lists:seq(1, 1 + trunc(WaitT/SyncInt))]), - logger:set_handler_config(?MODULE, logger_std_h, + logger:set_handler_config(?MODULE, config, #{filesync_repeat_interval => SyncInt}), SyncInt = maps:get(filesync_repeat_interval, logger_std_h:info(?MODULE)), timer:sleep(WaitT), - logger:set_handler_config(?MODULE, logger_std_h, + logger:set_handler_config(?MODULE, config, #{filesync_repeat_interval => no_repeat}), check_tracer(100), ok. -filesync(cleanup, _Config) -> +sync(cleanup, _Config) -> dbg:stop_clear(), logger:remove_handler(?MODULE). @@ -600,7 +617,7 @@ write_failure(Config) -> ok = log_on_remote_node(Node, "Logged1"), rpc:call(Node, logger_std_h, filesync, [?STANDARD_HANDLER]), ?check_no_log, - try_read_file(Log, {ok,<<"Logged1\n">>}, ?FILESYNC_REP_INT), + try_read_file(Log, {ok,<<"Logged1\n">>}, filesync_rep_int()), rpc:call(Node, ?MODULE, set_result, [file_write,{error,terminated}]), ok = log_on_remote_node(Node, "Cause simple error printout"), @@ -618,7 +635,7 @@ write_failure(Config) -> ok = log_on_remote_node(Node, "Logged2"), rpc:call(Node, logger_std_h, filesync, [?STANDARD_HANDLER]), ?check_no_log, - try_read_file(Log, {ok,<<"Logged1\nLogged2\n">>}, ?FILESYNC_REP_INT), + try_read_file(Log, {ok,<<"Logged1\nLogged2\n">>}, filesync_rep_int()), ok. write_failure(cleanup, _Config) -> Nodes = nodes(), @@ -636,7 +653,7 @@ sync_failure(Config) -> SyncInt = 500, ok = rpc:call(Node, logger, set_handler_config, - [?STANDARD_HANDLER, logger_std_h, + [?STANDARD_HANDLER, config, #{filesync_repeat_interval => SyncInt}]), Info = rpc:call(Node, logger_std_h, info, [?STANDARD_HANDLER]), SyncInt = maps:get(filesync_repeat_interval, Info), @@ -669,16 +686,16 @@ start_std_h_on_new_node(Config, Log) -> logger_test_lib:setup( Config, [{logger,[{handler,default,logger_std_h, - #{ logger_std_h => #{ type => {file,Log}}}}]}]), + #{ config => #{ type => {file,Log}}}}]}]), ok = rpc:call(Node,logger,set_handler_config,[?STANDARD_HANDLER,formatter, {?MODULE,nl}]), Node. %% functions for test hook macros to be called by rpc -set_internal_log(Mod, Func) -> - ?set_internal_log({Mod,Func}). -set_result(Op, Result) -> - ?set_result(Op, Result). +set_internal_log(_Mod, _Func) -> + ?set_internal_log({_Mod,_Func}). +set_result(_Op, _Result) -> + ?set_result(_Op, _Result). set_defaults() -> ?set_defaults(). @@ -697,15 +714,14 @@ op_switch_to_sync_file(Config) -> {Log,HConfig,StdHConfig} = start_handler(?MODULE, ?FUNCTION_NAME, Config), NumOfReqs = 500, NewHConfig = - HConfig#{logger_std_h => StdHConfig#{toggle_sync_qlen => 2, - drop_new_reqs_qlen => NumOfReqs+1, - flush_reqs_qlen => 2*NumOfReqs, - enable_burst_limit => false}}, + HConfig#{config => StdHConfig#{sync_mode_qlen => 2, + drop_mode_qlen => NumOfReqs+1, + flush_qlen => 2*NumOfReqs, + burst_limit_enable => false}}, ok = logger:set_handler_config(?MODULE, NewHConfig), %% TRecvPid = start_op_trace(), - send_burst({n,NumOfReqs}, seq, {chars,79}, info), + send_burst({n,NumOfReqs}, seq, {chars,79}, notice), Lines = count_lines(Log), - ok = file:delete(Log), %% true = analyse_trace(TRecvPid, %% fun(Events) -> find_mode(async,Events) end), %% true = analyse_trace(TRecvPid, @@ -718,6 +734,7 @@ op_switch_to_sync_file(Config) -> %% fun(Events) -> find_mode(flush,Events) end), %% stop_op_trace(TRecvPid), NumOfReqs = Lines, + ok = file_delete(Log), ok. op_switch_to_sync_file(cleanup, _Config) -> ok = stop_handler(?MODULE). @@ -726,12 +743,12 @@ op_switch_to_sync_tty(Config) -> {HConfig,StdHConfig} = start_handler(?MODULE, standard_io, Config), NumOfReqs = 500, NewHConfig = - HConfig#{logger_std_h => StdHConfig#{toggle_sync_qlen => 3, - drop_new_reqs_qlen => NumOfReqs+1, - flush_reqs_qlen => 2*NumOfReqs, - enable_burst_limit => false}}, + HConfig#{config => StdHConfig#{sync_mode_qlen => 3, + drop_mode_qlen => NumOfReqs+1, + flush_qlen => 2*NumOfReqs, + burst_limit_enable => false}}, ok = logger:set_handler_config(?MODULE, NewHConfig), - send_burst({n,NumOfReqs}, seq, {chars,79}, info), + send_burst({n,NumOfReqs}, seq, {chars,79}, notice), ok. op_switch_to_sync_tty(cleanup, _Config) -> ok = stop_handler(?MODULE). @@ -747,26 +764,26 @@ op_switch_to_drop_file(Config) -> Procs = 2, Bursts = 10, NewHConfig = - HConfig#{logger_std_h => - StdHConfig#{toggle_sync_qlen => 1, - drop_new_reqs_qlen => 2, - flush_reqs_qlen => + HConfig#{config => + StdHConfig#{sync_mode_qlen => 1, + drop_mode_qlen => 2, + flush_qlen => Procs*NumOfReqs*Bursts, - enable_burst_limit => false}}, + burst_limit_enable => false}}, ok = logger:set_handler_config(?MODULE, NewHConfig), %% It sometimes happens that the handler gets the %% requests in a slow enough pace so that dropping %% never occurs. Therefore, lets generate a number of %% bursts to increase the chance of message buildup. - [send_burst({n,NumOfReqs}, {spawn,Procs,0}, {chars,79}, info) || + [send_burst({n,NumOfReqs}, {spawn,Procs,0}, {chars,79}, notice) || _ <- lists:seq(1, Bursts)], Logged = count_lines(Log), ok = stop_handler(?MODULE), - _ = file:delete(Log), ct:pal("Number of messages dropped = ~w (~w)", [Procs*NumOfReqs*Bursts-Logged,Procs*NumOfReqs*Bursts]), true = (Logged < (Procs*NumOfReqs*Bursts)), true = (Logged > 0), + _ = file_delete(Log), ok end, %% As it's tricky to get the timing right in only one go, we perform the @@ -785,19 +802,19 @@ op_switch_to_drop_tty(Config) -> NumOfReqs = 300, Procs = 2, NewHConfig = - HConfig#{logger_std_h => StdHConfig#{toggle_sync_qlen => 1, - drop_new_reqs_qlen => 2, - flush_reqs_qlen => - Procs*NumOfReqs+1, - enable_burst_limit => false}}, + HConfig#{config => StdHConfig#{sync_mode_qlen => 1, + drop_mode_qlen => 2, + flush_qlen => + Procs*NumOfReqs+1, + burst_limit_enable => false}}, ok = logger:set_handler_config(?MODULE, NewHConfig), - send_burst({n,NumOfReqs}, {spawn,Procs,0}, {chars,79}, info), + send_burst({n,NumOfReqs}, {spawn,Procs,0}, {chars,79}, notice), ok. op_switch_to_drop_tty(cleanup, _Config) -> ok = stop_handler(?MODULE). op_switch_to_flush_file() -> - [{timetrap,{minutes,3}}]. + [{timetrap,{minutes,5}}]. op_switch_to_flush_file(Config) -> Test = fun() -> @@ -809,12 +826,12 @@ op_switch_to_flush_file(Config) -> %% (verify with coverage of flush_log_requests/2) NewHConfig = - HConfig#{logger_std_h => - StdHConfig#{toggle_sync_qlen => 2, + HConfig#{config => + StdHConfig#{sync_mode_qlen => 2, %% disable drop mode - drop_new_reqs_qlen => 300, - flush_reqs_qlen => 300, - enable_burst_limit => false}}, + drop_mode_qlen => 300, + flush_qlen => 300, + burst_limit_enable => false}}, ok = logger:set_handler_config(?MODULE, NewHConfig), NumOfReqs = 1500, Procs = 10, @@ -826,15 +843,15 @@ op_switch_to_flush_file(Config) -> %% sync messages gets tested). Therefore, lets %% generate a number of bursts to increase the chance %% of message buildup in some random fashion. - [send_burst({n,NumOfReqs}, {spawn,Procs,0}, {chars,79}, info) || + [send_burst({n,NumOfReqs}, {spawn,Procs,0}, {chars,79}, notice) || _ <- lists:seq(1,Bursts)], Logged = count_lines(Log), ok = stop_handler(?MODULE), - _ = file:delete(Log), ct:pal("Number of messages flushed/dropped = ~w (~w)", [NumOfReqs*Procs*Bursts-Logged,NumOfReqs*Procs*Bursts]), true = (Logged < (NumOfReqs*Procs*Bursts)), true = (Logged > 0), + _ = file_delete(Log), ok end, %% As it's tricky to get the timing right in only one go, we perform the @@ -848,6 +865,8 @@ op_switch_to_flush_file(Config) -> op_switch_to_flush_file(cleanup, _Config) -> _ = stop_handler(?MODULE). +op_switch_to_flush_tty() -> + [{timetrap,{minutes,5}}]. op_switch_to_flush_tty(Config) -> {HConfig,StdHConfig} = start_handler(?MODULE, standard_io, Config), @@ -855,15 +874,15 @@ op_switch_to_flush_tty(Config) -> %% when the flush happens (verify with coverage of flush_log_requests/2) NewHConfig = - HConfig#{logger_std_h => StdHConfig#{toggle_sync_qlen => 2, - %% disable drop mode - drop_new_reqs_qlen => 100, - flush_reqs_qlen => 100, - enable_burst_limit => false}}, + HConfig#{config => StdHConfig#{sync_mode_qlen => 2, + %% disable drop mode + drop_mode_qlen => 100, + flush_qlen => 100, + burst_limit_enable => false}}, ok = logger:set_handler_config(?MODULE, NewHConfig), NumOfReqs = 1000, Procs = 100, - send_burst({n,NumOfReqs}, {spawn,Procs,0}, {chars,79}, info), + send_burst({n,NumOfReqs}, {spawn,Procs,0}, {chars,79}, notice), ok. op_switch_to_flush_tty(cleanup, _Config) -> ok = stop_handler(?MODULE). @@ -871,18 +890,19 @@ op_switch_to_flush_tty(cleanup, _Config) -> limit_burst_disabled(Config) -> {Log,HConfig,StdHConfig} = start_handler(?MODULE, ?FUNCTION_NAME, Config), NewHConfig = - HConfig#{logger_std_h => StdHConfig#{enable_burst_limit => false, - burst_limit_size => 10, - burst_window_time => 2000, - drop_new_reqs_qlen => 200, - flush_reqs_qlen => 300}}, + HConfig#{config => StdHConfig#{burst_limit_enable => false, + burst_limit_max_count => 10, + burst_limit_window_time => 2000, + drop_mode_qlen => 200, + flush_qlen => 300}}, ok = logger:set_handler_config(?MODULE, NewHConfig), NumOfReqs = 100, - send_burst({n,NumOfReqs}, seq, {chars,79}, info), + send_burst({n,NumOfReqs}, seq, {chars,79}, notice), Logged = count_lines(Log), ct:pal("Number of messages logged = ~w", [Logged]), - ok = file:delete(Log), - NumOfReqs = Logged. + NumOfReqs = Logged, + ok = file_delete(Log), + ok. limit_burst_disabled(cleanup, _Config) -> ok = stop_handler(?MODULE). @@ -890,18 +910,19 @@ limit_burst_enabled_one(Config) -> {Log,HConfig,StdHConfig} = start_handler(?MODULE, ?FUNCTION_NAME, Config), ReqLimit = 10, NewHConfig = - HConfig#{logger_std_h => StdHConfig#{enable_burst_limit => true, - burst_limit_size => ReqLimit, - burst_window_time => 2000, - drop_new_reqs_qlen => 200, - flush_reqs_qlen => 300}}, + HConfig#{config => StdHConfig#{burst_limit_enable => true, + burst_limit_max_count => ReqLimit, + burst_limit_window_time => 2000, + drop_mode_qlen => 200, + flush_qlen => 300}}, ok = logger:set_handler_config(?MODULE, NewHConfig), NumOfReqs = 100, - send_burst({n,NumOfReqs}, seq, {chars,79}, info), + send_burst({n,NumOfReqs}, seq, {chars,79}, notice), Logged = count_lines(Log), ct:pal("Number of messages logged = ~w", [Logged]), - ok = file:delete(Log), - ReqLimit = Logged. + ReqLimit = Logged, + ok = file_delete(Log), + ok. limit_burst_enabled_one(cleanup, _Config) -> ok = stop_handler(?MODULE). @@ -910,57 +931,58 @@ limit_burst_enabled_period(Config) -> ReqLimit = 10, BurstTWin = 1000, NewHConfig = - HConfig#{logger_std_h => StdHConfig#{enable_burst_limit => true, - burst_limit_size => ReqLimit, - burst_window_time => BurstTWin, - drop_new_reqs_qlen => 20000, - flush_reqs_qlen => 20001}}, + HConfig#{config => StdHConfig#{burst_limit_enable => true, + burst_limit_max_count => ReqLimit, + burst_limit_window_time => BurstTWin, + drop_mode_qlen => 20000, + flush_qlen => 20001}}, ok = logger:set_handler_config(?MODULE, NewHConfig), Windows = 3, - Sent = send_burst({t,BurstTWin*Windows}, seq, {chars,79}, info), + Sent = send_burst({t,BurstTWin*Windows}, seq, {chars,79}, notice), Logged = count_lines(Log), ct:pal("Number of messages sent = ~w~nNumber of messages logged = ~w", [Sent,Logged]), - ok = file:delete(Log), true = (Logged > (ReqLimit*Windows)) andalso - (Logged < (ReqLimit*(Windows+2))). + (Logged < (ReqLimit*(Windows+2))), + ok = file_delete(Log), + ok. limit_burst_enabled_period(cleanup, _Config) -> ok = stop_handler(?MODULE). kill_disabled(Config) -> {Log,HConfig,StdHConfig} = start_handler(?MODULE, ?FUNCTION_NAME, Config), NewHConfig = - HConfig#{logger_std_h=>StdHConfig#{enable_kill_overloaded=>false, - handler_overloaded_qlen=>10, - handler_overloaded_mem=>100}}, + HConfig#{config=>StdHConfig#{overload_kill_enable=>false, + overload_kill_qlen=>10, + overload_kill_mem_size=>100}}, ok = logger:set_handler_config(?MODULE, NewHConfig), NumOfReqs = 100, - send_burst({n,NumOfReqs}, seq, {chars,79}, info), + send_burst({n,NumOfReqs}, seq, {chars,79}, notice), Logged = count_lines(Log), ct:pal("Number of messages logged = ~w", [Logged]), - ok = file:delete(Log), - true = is_pid(whereis(?MODULE)), + ok = file_delete(Log), + true = is_pid(whereis(h_proc_name())), ok. kill_disabled(cleanup, _Config) -> ok = stop_handler(?MODULE). qlen_kill_new(Config) -> - {_Log,HConfig,StdHConfig} = start_handler(?MODULE, ?FUNCTION_NAME, Config), - Pid0 = whereis(?MODULE), + {Log,HConfig,StdHConfig} = start_handler(?MODULE, ?FUNCTION_NAME, Config), + Pid0 = whereis(h_proc_name()), {_,Mem0} = process_info(Pid0, memory), - RestartAfter = ?HANDLER_RESTART_AFTER, + RestartAfter = ?OVERLOAD_KILL_RESTART_AFTER, NewHConfig = - HConfig#{logger_std_h=>StdHConfig#{enable_kill_overloaded=>true, - handler_overloaded_qlen=>10, - handler_overloaded_mem=>Mem0+50000, - handler_restart_after=>RestartAfter}}, + HConfig#{config=>StdHConfig#{overload_kill_enable=>true, + overload_kill_qlen=>10, + overload_kill_mem_size=>Mem0+50000, + overload_kill_restart_after=>RestartAfter}}, ok = logger:set_handler_config(?MODULE, NewHConfig), MRef = erlang:monitor(process, Pid0), NumOfReqs = 100, - Procs = 2, - send_burst({n,NumOfReqs}, {spawn,Procs,0}, {chars,79}, info), - %% send_burst({n,NumOfReqs}, seq, {chars,79}, info), + Procs = 4, + send_burst({n,NumOfReqs}, {spawn,Procs,0}, {chars,79}, notice), + %% send_burst({n,NumOfReqs}, seq, {chars,79}, notice), receive {'DOWN', MRef, _, _, Info} -> case Info of @@ -969,8 +991,8 @@ qlen_kill_new(Config) -> killed -> ct:pal("Slow shutdown, handler process was killed!", []) end, - timer:sleep(RestartAfter + 2000), - true = is_pid(whereis(?MODULE)), + file_delete(Log), + {ok,_} = wait_for_process_up(RestartAfter * 3), ok after 5000 -> @@ -990,28 +1012,28 @@ qlen_kill_std(_Config) -> %% Log = filename:join(Dir, File), %% Node = start_std_h_on_new_node(Config, ?FUNCTION_NAME, Log), %% ok = rpc:call(Node, logger, set_handler_config, - %% [?STANDARD_HANDLER, logger_std_h, - %% #{enable_kill_overloaded=>true, - %% handler_overloaded_qlen=>10, - %% handler_overloaded_mem=>100000}]), + %% [?STANDARD_HANDLER, config, + %% #{overload_kill_enable=>true, + %% overload_kill_qlen=>10, + %% overload_kill_mem_size=>100000}]), {skip,"Not done yet"}. mem_kill_new(Config) -> - {_Log,HConfig,StdHConfig} = start_handler(?MODULE, ?FUNCTION_NAME, Config), - Pid0 = whereis(?MODULE), + {Log,HConfig,StdHConfig} = start_handler(?MODULE, ?FUNCTION_NAME, Config), + Pid0 = whereis(h_proc_name()), {_,Mem0} = process_info(Pid0, memory), - RestartAfter = ?HANDLER_RESTART_AFTER, + RestartAfter = ?OVERLOAD_KILL_RESTART_AFTER, NewHConfig = - HConfig#{logger_std_h=>StdHConfig#{enable_kill_overloaded=>true, - handler_overloaded_qlen=>50000, - handler_overloaded_mem=>Mem0+500, - handler_restart_after=>RestartAfter}}, + HConfig#{config=>StdHConfig#{overload_kill_enable=>true, + overload_kill_qlen=>50000, + overload_kill_mem_size=>Mem0+500, + overload_kill_restart_after=>RestartAfter}}, ok = logger:set_handler_config(?MODULE, NewHConfig), MRef = erlang:monitor(process, Pid0), NumOfReqs = 100, - Procs = 2, - send_burst({n,NumOfReqs}, {spawn,Procs,0}, {chars,79}, info), - %% send_burst({n,NumOfReqs}, seq, {chars,79}, info), + Procs = 4, + send_burst({n,NumOfReqs}, {spawn,Procs,0}, {chars,79}, notice), + %% send_burst({n,NumOfReqs}, seq, {chars,79}, notice), receive {'DOWN', MRef, _, _, Info} -> case Info of @@ -1020,8 +1042,8 @@ mem_kill_new(Config) -> killed -> ct:pal("Slow shutdown, handler process was killed!", []) end, - timer:sleep(RestartAfter * 3), - true = is_pid(whereis(?MODULE)), + file_delete(Log), + {ok,_} = wait_for_process_up(RestartAfter * 3), ok after 5000 -> @@ -1037,53 +1059,58 @@ mem_kill_new(cleanup, _Config) -> mem_kill_std(_Config) -> {skip,"Not done yet"}. +restart_after() -> + [{timetrap,{minutes,2}}]. restart_after(Config) -> {Log,HConfig,StdHConfig} = start_handler(?MODULE, ?FUNCTION_NAME, Config), NewHConfig1 = - HConfig#{logger_std_h=>StdHConfig#{enable_kill_overloaded=>true, - handler_overloaded_qlen=>10, - handler_restart_after=>never}}, + HConfig#{config=>StdHConfig#{overload_kill_enable=>true, + overload_kill_qlen=>10, + overload_kill_restart_after=>infinity}}, ok = logger:set_handler_config(?MODULE, NewHConfig1), - MRef1 = erlang:monitor(process, whereis(?MODULE)), + MRef1 = erlang:monitor(process, whereis(h_proc_name())), %% kill handler - send_burst({n,100}, {spawn,2,0}, {chars,79}, info), + send_burst({n,100}, {spawn,4,0}, {chars,79}, notice), receive - {'DOWN', MRef1, _, _, _Info1} -> - timer:sleep(?HANDLER_RESTART_AFTER + 1000), - undefined = whereis(?MODULE), + {'DOWN', MRef1, _, _, _Reason1} -> + file_delete(Log), + error = wait_for_process_up(?OVERLOAD_KILL_RESTART_AFTER * 3), ok after 5000 -> + Info1 = logger_std_h:info(?MODULE), + ct:pal("Handler state = ~p", [Info1]), ct:fail("Handler not dead! It should not have survived this!") end, {Log,_,_} = start_handler(?MODULE, ?FUNCTION_NAME, Config), - RestartAfter = ?HANDLER_RESTART_AFTER, + RestartAfter = ?OVERLOAD_KILL_RESTART_AFTER, NewHConfig2 = - HConfig#{logger_std_h=>StdHConfig#{enable_kill_overloaded=>true, - handler_overloaded_qlen=>10, - handler_restart_after=>RestartAfter}}, + HConfig#{config=>StdHConfig#{overload_kill_enable=>true, + overload_kill_qlen=>10, + overload_kill_restart_after=>RestartAfter}}, ok = logger:set_handler_config(?MODULE, NewHConfig2), - Pid0 = whereis(?MODULE), + Pid0 = whereis(h_proc_name()), MRef2 = erlang:monitor(process, Pid0), %% kill handler - send_burst({n,100}, {spawn,2,0}, {chars,79}, info), + send_burst({n,100}, {spawn,4,0}, {chars,79}, notice), receive - {'DOWN', MRef2, _, _, _Info2} -> - timer:sleep(RestartAfter + 2000), - Pid1 = whereis(?MODULE), - true = is_pid(Pid1), + {'DOWN', MRef2, _, _, _Reason2} -> + file_delete(Log), + {ok,Pid1} = wait_for_process_up(RestartAfter * 3), false = (Pid1 == Pid0), ok after 5000 -> + Info2 = logger_std_h:info(?MODULE), + ct:pal("Handler state = ~p", [Info2]), ct:fail("Handler not dead! It should not have survived this!") end, ok. restart_after(cleanup, _Config) -> ok = stop_handler(?MODULE). -%% send handler requests (filesync, info, reset, change_config) +%% send handler requests (sync, info, reset, change_config) %% during high load to verify that sync, dropping and flushing is %% handled correctly. handler_requests_under_load() -> @@ -1092,17 +1119,17 @@ handler_requests_under_load(Config) -> {Log,HConfig,StdHConfig} = start_handler(?MODULE, ?FUNCTION_NAME, Config), NewHConfig = - HConfig#{logger_std_h => StdHConfig#{toggle_sync_qlen => 2, - drop_new_reqs_qlen => 1000, - flush_reqs_qlen => 2000, - enable_burst_limit => false}}, + HConfig#{config => StdHConfig#{sync_mode_qlen => 2, + drop_mode_qlen => 1000, + flush_qlen => 2000, + burst_limit_enable => false}}, ok = logger:set_handler_config(?MODULE, NewHConfig), Pid = spawn_link(fun() -> send_requests(?MODULE, 1, [{filesync,[]}, {info,[]}, {reset,[]}, {change_config,[]}]) end), - Sent = send_burst({t,10000}, seq, {chars,79}, info), + Sent = send_burst({t,10000}, seq, {chars,79}, notice), Pid ! {self(),finish}, ReqResult = receive {Pid,Result} -> Result end, Logged = count_lines(Log), @@ -1115,7 +1142,7 @@ handler_requests_under_load(Config) -> Errors = [{Req,FindError(Res)} || {Req,Res} <- ReqResult], NoOfReqs = lists:foldl(fun({_,Res}, N) -> N + length(Res) end, 0, ReqResult), ct:pal("~w requests made. Errors: ~n~p", [NoOfReqs,Errors]), - ok = file:delete(Log). + ok = file_delete(Log). handler_requests_under_load(cleanup, _Config) -> ok = stop_handler(?MODULE). @@ -1128,8 +1155,8 @@ send_requests(HName, TO, Reqs = [{Req,Res}|Rs]) -> Result = case Req of change_config -> - logger:set_handler_config(HName, logger_std_h, - #{enable_kill_overloaded => + logger:set_handler_config(HName, config, + #{overload_kill_enable => false}); Func -> logger_std_h:Func(HName) @@ -1144,12 +1171,11 @@ start_handler(Name, TTY, Config) when TTY == standard_io; TTY == standard_error-> ok = logger:add_handler(Name, logger_std_h, - #{logger_std_h => #{type => TTY}, + #{config => #{type => TTY}, filter_default=>log, filters=>?DEFAULT_HANDLER_FILTERS([Name]), formatter=>{?MODULE,op}}), - {ok,{_,HConfig = #{logger_std_h := StdHConfig}}} = - logger:get_handler_config(Name), + {ok,HConfig = #{config := StdHConfig}} = logger:get_handler_config(Name), {HConfig,StdHConfig}; start_handler(Name, FuncName, Config) -> @@ -1157,14 +1183,14 @@ start_handler(Name, FuncName, Config) -> Log = filename:join(Dir, lists:concat([FuncName,".log"])), ct:pal("Logging to ~tp", [Log]), Type = {file,Log}, + _ = file_delete(Log), ok = logger:add_handler(Name, logger_std_h, - #{logger_std_h => #{type => Type}, + #{config => #{type => Type}, filter_default=>log, filters=>?DEFAULT_HANDLER_FILTERS([Name]), formatter=>{?MODULE,op}}), - {ok,{_,HConfig = #{logger_std_h := StdHConfig}}} = - logger:get_handler_config(Name), + {ok,HConfig = #{config := StdHConfig}} = logger:get_handler_config(Name), {Log,HConfig,StdHConfig}. stop_handler(Name) -> @@ -1182,27 +1208,31 @@ wait_until_written(File, Sz) -> {ok,#file_info{size = Sz}} -> timer:sleep(1000), case file:read_file_info(File) of - {ok,#file_info{size = Sz1}} -> + {ok,#file_info{size = Sz}} -> ok; - {ok,#file_info{size = Sz2}} -> - wait_until_written(File, Sz2) + {ok,#file_info{size = Sz1}} -> + wait_until_written(File, Sz1) end; {ok,#file_info{size = Sz1}} -> wait_until_written(File, Sz1) end. count_lines1(File) -> - Counter = fun Cnt(Dev,LC) -> - case file:read_line(Dev) of - eof -> LC; - _ -> Cnt(Dev,LC+1) - end - end, {_,Dev} = file:open(File, [read]), - Lines = Counter(Dev, 0), + Lines = count_lines2(Dev, 0), file:close(Dev), Lines. +count_lines2(Dev, LC) -> + case file:read_line(Dev) of + {ok,"Handler logger_std_h_SUITE " ++_} -> + %% Not counting handler info + count_lines2(Dev,LC); + {ok,_} -> + count_lines2(Dev,LC+1); + eof -> LC + end. + send_burst(NorT, Type, {chars,Sz}, Class) -> Text = [34 + rand:uniform(126-34) || _ <- lists:seq(1,Sz)], case NorT of @@ -1224,12 +1254,9 @@ send_n_burst(N, seq, Text, Class) -> send_n_burst(N-1, seq, Text, Class); send_n_burst(N, {spawn,Ps,TO}, Text, Class) -> ct:pal("~w processes each sending ~w messages", [Ps,N]), - PerProc = fun() -> - send_n_burst(N, seq, Text, Class) - end, MRefs = [begin if TO == 0 -> ok; true -> timer:sleep(TO) end, - monitor(process,spawn_link(PerProc)) end || - _ <- lists:seq(1,Ps)], + monitor(process,spawn_link(per_proc_fun(N,Text,Class,X))) + end || X <- lists:seq(1,Ps)], lists:foreach(fun(MRef) -> receive {'DOWN', MRef, _, _, _} -> @@ -1248,6 +1275,16 @@ send_t_burst(T0, T, Text, Class, N) -> send_t_burst(T0, T, Text, Class, N+1) end. +per_proc_fun(N,Text,Class,X) when X rem 2 == 0 -> + fun() -> + process_flag(priority,high), + send_n_burst(N, seq, Text, Class) + end; +per_proc_fun(N,Text,Class,_) -> + fun() -> + send_n_burst(N, seq, Text, Class) + end. + %%%----------------------------------------------------------------- %%% Formatter callback %%% Using this to send the formatted string back to the test case @@ -1271,9 +1308,11 @@ format(#{msg:={report,#{label:={gen_server,terminate}}}},op) -> ""; format(#{msg:={report,#{label:={proc_lib,crash}}}},op) -> ""; -format(#{msg:={F,A}},Pid) when is_list(F), is_list(A) -> +format(#{msg:={F,A}},OpOrPid) when is_list(F), is_list(A) -> String = lists:flatten(io_lib:format(F,A)), - Pid ! {log,String}, + if is_pid(OpOrPid) -> OpOrPid ! {log,String}; + true -> ok + end, String++"\n"; format(#{msg:={string,String0}},Pid) -> String = unicode:characters_to_list(String0), @@ -1282,21 +1321,21 @@ format(#{msg:={string,String0}},Pid) -> add_remove_instance_nofile(Type) -> ok = logger:add_handler(?MODULE,logger_std_h, - #{logger_std_h => #{type => Type}, + #{config => #{type => Type}, filter_default=>stop, filters=>?DEFAULT_HANDLER_FILTERS([?MODULE]), formatter=>{?MODULE,self()}}), - Pid = whereis(?MODULE), + Pid = whereis(h_proc_name()), true = is_pid(Pid), group_leader(group_leader(),Pid), % to get printouts in test log - logger:info(M1=?msg,?domain), + logger:notice(M1=?msg,?domain), ?check(M1), - %% check that filesync doesn't do damage even if not relevant + %% check that sync doesn't do damage even if not relevant ok = logger_std_h:filesync(?MODULE), ok = logger:remove_handler(?MODULE), timer:sleep(500), - undefined = whereis(?MODULE), - logger:info(?msg,?domain), + undefined = whereis(h_proc_name()), + logger:notice(?msg,?domain), ?check_no_log, ok. @@ -1379,7 +1418,7 @@ start_op_trace() -> TRecvPid = spawn_link(fun() -> trace_receiver(5000) end), {ok,_} = dbg:tracer(process, {TraceFun, TRecvPid}), - {ok,_} = dbg:p(whereis(?MODULE), [c]), + {ok,_} = dbg:p(whereis(h_proc_name()), [c]), {ok,_} = dbg:p(self(), [c]), MS1 = dbg:fun2ms(fun([_]) -> return_trace() end), @@ -1459,7 +1498,7 @@ start_tracer(Trace,Expected) -> Pid = self(), FileCtrlPid = maps:get(file_ctrl_pid, logger_std_h:info(?MODULE)), dbg:tracer(process,{fun tracer/2,{Pid,Expected}}), - dbg:p(whereis(?MODULE),[c]), + dbg:p(whereis(h_proc_name()),[c]), dbg:p(FileCtrlPid,[c]), tpl(Trace), ok. @@ -1525,3 +1564,44 @@ escape([H|T]) -> [H|escape(T)]; escape([]) -> []. + +h_proc_name() -> + h_proc_name(?MODULE). +h_proc_name(Name) -> + ?name_to_reg_name(logger_std_h,Name). + +wait_for_process_up(T) -> + wait_for_process_up(?MODULE, h_proc_name(), T). + +wait_for_process_up(Name, RegName, T) -> + N = (T div 500) + 1, + wait_for_process_up1(Name, RegName, N). + +wait_for_process_up1(_Name, _RegName, 0) -> + error; +wait_for_process_up1(Name, RegName, N) -> + timer:sleep(500), + case whereis(RegName) of + Pid when is_pid(Pid) -> + case logger:get_handler_config(Name) of + {ok,_} -> + %% ct:pal("Process ~p up (~p tries left)",[Name,N]), + {ok,Pid}; + _ -> + wait_for_process_up1(Name, RegName, N-1) + end; + undefined -> + %% ct:pal("Waiting for process ~p (~p tries left)",[Name,N]), + wait_for_process_up1(Name, RegName, N-1) + end. + +filesync_rep_int() -> + case (fun() -> is_atom(?FILESYNC_REPEAT_INTERVAL) end)() of + true -> 5500; + false -> ?FILESYNC_REPEAT_INTERVAL + 500 + end. + + +file_delete(Log) -> + file:delete(Log). + |