diff options
Diffstat (limited to 'lib/kernel')
61 files changed, 3912 insertions, 1514 deletions
diff --git a/lib/kernel/doc/src/code.xml b/lib/kernel/doc/src/code.xml index c94f612c01..bd95819636 100644 --- a/lib/kernel/doc/src/code.xml +++ b/lib/kernel/doc/src/code.xml @@ -34,26 +34,28 @@ <p>This module contains the interface to the Erlang <em>code server</em>, which deals with the loading of compiled code into a running Erlang runtime system.</p> - <p>The runtime system can be started in <em>embedded</em> or - <em>interactive</em> mode. Which one is decided by command-line + <p>The runtime system can be started in <em>interactive</em> or + <em>embedded</em> mode. Which one is decided by the command-line flag <c>-mode</c>:</p> <pre> % <input>erl -mode interactive</input></pre> <p>The modes are as follows:</p> <list type="bulleted"> <item> - <p>In embedded mode, all code is loaded during system startup - according to the boot script. (Code can also be loaded later - by explicitly ordering the code server to do so).</p> - </item> - <item> <p>In interactive mode, which is default, only some code is loaded - during system startup, basically the modules needed by the runtime + during system startup, basically the modules needed by the runtime system. Other code is dynamically loaded when first referenced. When a call to a function in a certain module is made, and the module is not loaded, the code server searches for and tries to load the module.</p> </item> + <item> + <p>In embedded mode, modules are not auto loaded. Trying to use + a module that has not been loaded results in an error. This mode is + recommended when the boot script loads all modules, as it is + typically done in OTP releases. (Code can still be loaded later + by explicitly ordering the code server to do so).</p> + </item> </list> <p>To prevent accidentally reloading of modules affecting the Erlang runtime system, directories <c>kernel</c>, <c>stdlib</c>, diff --git a/lib/kernel/doc/src/file.xml b/lib/kernel/doc/src/file.xml index b674b3ca93..8477b0e148 100644 --- a/lib/kernel/doc/src/file.xml +++ b/lib/kernel/doc/src/file.xml @@ -33,15 +33,18 @@ <description> <p>This module provides an interface to the file system.</p> - <p>On operating systems with thread support, - file operations can be performed in threads of their own, allowing - other Erlang processes to continue executing in parallel with - the file operations. See command-line flag - <c>+A</c> in <seealso marker="erts:erl"><c>erl(1)</c></seealso>.</p> + <warning> + <p>File operations are only guaranteed to appear atomic when going + through the same file server. A NIF or other OS process may observe + intermediate steps on certain operations on some operating systems, + eg. renaming an existing file on Windows, or + <seealso marker="#write_file_info/2"><c>write_file_info/2</c> + </seealso> on any OS at the time of writing.</p> + </warning> <p>Regarding filename encoding, the Erlang VM can operate in two modes. The current mode can be queried using function - <seealso marker="#native_name_encoding"><c>native_name_encoding/0</c></seealso>. + <seealso marker="#native_name_encoding/0"><c>native_name_encoding/0</c></seealso>. It returns <c>latin1</c> or <c>utf8</c>.</p> <p>In <c>latin1</c> mode, the Erlang VM does not change the @@ -59,7 +62,7 @@ terminal supports UTF-8, otherwise <c>latin1</c>. The default can be overridden using <c>+fnl</c> (to force <c>latin1</c> mode) or <c>+fnu</c> (to force <c>utf8</c> mode) when starting - <seealso marker="erts:erl"><c>erts:erl</c></seealso>.</p> + <seealso marker="erts:erl"><c>erl</c></seealso>.</p> <p>On operating systems with transparent naming, files can be inconsistently named, for example, some files are encoded in UTF-8 while @@ -81,6 +84,16 @@ <p>See also section <seealso marker="stdlib:unicode_usage#notes-about-raw-filenames">Notes About Raw Filenames</seealso> in the STDLIB User's Guide.</p> + <note><p> + File operations used to accept filenames containing + null characters (integer value zero). This caused + the name to be truncated and in some cases arguments + to primitive operations to be mixed up. Filenames + containing null characters inside the filename + are now <em>rejected</em> and will cause primitive + file operations fail. + </p></note> + </description> <datatypes> @@ -96,9 +109,21 @@ </datatype> <datatype> <name name="filename"/> + <desc> + <p> + See also the documentation of the + <seealso marker="#type-name_all"><c>name_all()</c></seealso> type. + </p> + </desc> </datatype> <datatype> <name name="filename_all"/> + <desc> + <p> + See also the documentation of the + <seealso marker="#type-name_all"><c>name_all()</c></seealso> type. + </p> + </desc> </datatype> <datatype> <name name="io_device"/> @@ -112,21 +137,23 @@ <name name="name"/> <desc> <p>If VM is in Unicode filename mode, <c>string()</c> and <c>char()</c> - are allowed to be > 255. + are allowed to be > 255. See also the documentation of the + <seealso marker="#type-name_all"><c>name_all()</c></seealso> type. </p> </desc> </datatype> <datatype> <name name="name_all"/> <desc> - <p>If VM is in Unicode filename mode, <c>string()</c> and <c>char()</c> + <p>If VM is in Unicode filename mode, characters are allowed to be > 255. <c><anno>RawFilename</anno></c> is a filename not subject to Unicode translation, meaning that it can contain characters not conforming to the Unicode encoding expected from the file system (that is, non-UTF-8 characters although the VM is started - in Unicode filename mode). + in Unicode filename mode). Null characters (integer value zero) + are <em>not</em> allowed in filenames (not even at the end). </p> </desc> </datatype> @@ -1407,8 +1434,12 @@ f.txt: {person, "kalle", 25}. which is 1970-01-01 00:00 UTC.</p></item> </taglist> <p>Default is <c>{time, local}</c>.</p> - <p>If the option <c>raw</c> is set, the file server is not called - and only information about local files is returned.</p> + <p>If the option <c>raw</c> is set, the file server is not called and + only information about local files is returned. Note that this will + break this module's atomicity guarantees as it can race with a + concurrent call to + <seealso marker="#write_file_info/2"><c>write_file_info/1,2</c> + </seealso></p> <note> <p>As file times are stored in POSIX time on most OS, it is faster to query file information with option <c>posix</c>.</p> @@ -1656,8 +1687,12 @@ f.txt: {person, "kalle", 25}. except that if <c><anno>Name</anno></c> is a symbolic link, information about the link is returned in the <c>file_info</c> record and the <c>type</c> field of the record is set to <c>symlink</c>.</p> - <p>If the option <c>raw</c> is set, the file server is not called - and only information about local files is returned.</p> + <p>If the option <c>raw</c> is set, the file server is not called and + only information about local files is returned. Note that this will + break this module's atomicity guarantees as it can race with a + concurrent call to + <seealso marker="#write_file_info/2"><c>write_file_info/1,2</c> + </seealso></p> <p>If <c><anno>Name</anno></c> is not a symbolic link, this function returns the same result as <c>read_file_info/1</c>. On platforms that do not support symbolic links, this function @@ -1795,24 +1830,16 @@ f.txt: {person, "kalle", 25}. <p>The file used must be opened using the <c>raw</c> flag, and the process calling <c>sendfile</c> must be the controlling process of the socket. See <seealso marker="gen_tcp#controlling_process-2"><c>gen_tcp:controlling_process/2</c></seealso>.</p> - <p>If the OS used does not support <c>sendfile</c>, an Erlang fallback - using - <seealso marker="#read/2"><c>read/2</c></seealso> and - <seealso marker="gen_tcp#send/2"><c>gen_tcp:send/2</c></seealso> is used.</p> + <p>If the OS used does not support non-blocking <c>sendfile</c>, an + Erlang fallback using <seealso marker="#read/2"><c>read/2</c></seealso> + and <seealso marker="gen_tcp#send/2"><c>gen_tcp:send/2</c></seealso> is + used.</p> <p>The option list can contain the following options:</p> <taglist> <tag><c>chunk_size</c></tag> <item><p>The chunk size used by the Erlang fallback to send data. If using the fallback, set this to a value that comfortably fits in the systems memory. Default is 20 MB.</p></item> - <tag><c>use_threads</c></tag> - <item><p>Instructs the emulator to use the <c>async</c> thread pool for the - <c>sendfile</c> system call. This can be useful if the OS you are running - on does not properly support non-blocking <c>sendfile</c> calls. Notice that - using <c>async</c> threads potentially makes your system vulnerable to slow - client attacks. If set to <c>true</c> and no <c>async</c> threads are available, - the <c>sendfile</c> call returns <c>{error,einval}</c>. - Introduced in Erlang/OTP 17.0. Default is <c>false</c>.</p></item> </taglist> </desc> </func> @@ -1825,7 +1852,7 @@ f.txt: {person, "kalle", 25}. <p>The functions in the module <c>file</c> usually treat binaries as raw filenames, that is, they are passed "as is" even when the encoding of the binary does not agree with - <seealso marker="#native_name_encoding"><c>native_name_encoding()</c></seealso>. + <seealso marker="#native_name_encoding/0"><c>native_name_encoding()</c></seealso>. However, this function expects binaries to be encoded according to the value returned by <c>native_name_encoding()</c>.</p> <p>Typical error reasons are:</p> @@ -2117,144 +2144,77 @@ f.txt: {person, "kalle", 25}. <section> <title>Performance</title> - <p>Some operating system file operations, for example, a - <c>sync/1</c> or <c>close/1</c> on a huge file, can block their - calling thread for seconds. If this affects the emulator main - thread, the response time is no longer in the order of - milliseconds, depending on the definition of "soft" in soft - real-time system.</p> - <p>If the device driver thread pool is active, file operations are - done through those threads instead, so the emulator can go on - executing Erlang processes. Unfortunately, the time for serving a - file operation increases because of the extra scheduling required - from the operating system.</p> - <p>If the device driver thread pool is disabled or of size 0, large - file reads and writes are segmented into many smaller, which - enable the emulator to serve other processes during the file - operation. This has the same effect as when using the thread - pool, but with larger overhead. Other file operations, for - example, <c>sync/1</c> or <c>close/1</c> on a huge file, still are - a problem.</p> - <p>For increased performance, raw files are recommended. Raw files - use the file system of the host machine of the node.</p> + <p>For increased performance, raw files are recommended.</p> + <p>A normal file is really a process so it can be used as an I/O + device (see <seealso marker="stdlib:io"><c>io</c></seealso>). + Therefore, when data is written to a normal file, the sending of the + data to the file process, copies all data that are not binaries. Opening + the file in binary mode and writing binaries is therefore recommended. + If the file is opened on another node, or if the file server runs as + slave to the file server of another node, also binaries are copied.</p> <note> - <p> - For normal files (non-raw), the file server is used to find the files, - and if the node is running its file server as slave to the file server - of another node, and the other node runs on some other host machine, - they can have different file systems. - However, this is seldom a problem.</p> + <p>Raw files use the file system of the host machine of the node. + For normal files (non-raw), the file server is used to find the files, + and if the node is running its file server as slave to the file server + of another node, and the other node runs on some other host machine, + they can have different file systems. + However, this is seldom a problem.</p> </note> - <p>A normal file is really a process so it can be used as an I/O - device (see - <seealso marker="stdlib:io"><c>io</c></seealso>). - Therefore, when data is written to a - normal file, the sending of the data to the file process, copies - all data that are not binaries. Opening the file in binary mode - and writing binaries is therefore recommended. If the file is - opened on another node, or if the file server runs as slave to - the file server of another node, also binaries are copied.</p> - <p>Caching data to reduce the number of file operations, or rather - the number of calls to the file driver, generally increases - performance. The following function writes 4 MBytes in 23 - seconds when tested:</p> + <p><seealso marker="#open/2"><c>open/2</c></seealso> can be given the + options <c>delayed_write</c> and <c>read_ahead</c> to turn on caching, + which will reduce the number of operating system calls and greatly + improve performance for small reads and writes. However, the overhead + won't disappear completely and it's best to keep the number of file + operations to a minimum. As a contrived example, the following function + writes 4MB in 2.5 seconds when tested:</p> + <code type="none"><![CDATA[ -create_file_slow(Name, N) when integer(N), N >= 0 -> - {ok, FD} = file:open(Name, [raw, write, delayed_write, binary]), - ok = create_file_slow(FD, 0, N), - ok = ?FILE_MODULE:close(FD), - ok. - -create_file_slow(FD, M, M) -> +create_file_slow(Name) -> + {ok, Fd} = file:open(Name, [raw, write, delayed_write, binary]), + create_file_slow_1(Fd, 4 bsl 20), + file:close(Fd). + +create_file_slow_1(_Fd, 0) -> ok; -create_file_slow(FD, M, N) -> - ok = file:write(FD, <<M:32/unsigned>>), - create_file_slow(FD, M+1, N).]]></code> +create_file_slow_1(Fd, M) -> + ok = file:write(Fd, <<0>>), + create_file_slow_1(Fd, M - 1).]]></code> + + <p>The following functionally equivalent code writes 128 bytes per call + to <seealso marker="#write/2"><c>write/2</c></seealso> and so does the + same work in 0.08 seconds, which is roughly 30 times faster:</p> - <p>The following, functionally equivalent, function collects 1024 - entries into a list of 128 32-byte binaries before each call to - <seealso marker="#write/2"><c>write/2</c></seealso> and so - does the same work in 0.52 seconds, - which is 44 times faster:</p> <code type="none"><![CDATA[ -create_file(Name, N) when integer(N), N >= 0 -> - {ok, FD} = file:open(Name, [raw, write, delayed_write, binary]), - ok = create_file(FD, 0, N), - ok = ?FILE_MODULE:close(FD), +create_file(Name) -> + {ok, Fd} = file:open(Name, [raw, write, delayed_write, binary]), + create_file_1(Fd, 4 bsl 20), + file:close(Fd), ok. - -create_file(FD, M, M) -> + +create_file_1(_Fd, 0) -> ok; -create_file(FD, M, N) when M + 1024 =< N -> - create_file(FD, M, M + 1024, []), - create_file(FD, M + 1024, N); -create_file(FD, M, N) -> - create_file(FD, M, N, []). - -create_file(FD, M, M, R) -> - ok = file:write(FD, R); -create_file(FD, M, N0, R) when M + 8 =< N0 -> - N1 = N0-1, N2 = N0-2, N3 = N0-3, N4 = N0-4, - N5 = N0-5, N6 = N0-6, N7 = N0-7, N8 = N0-8, - create_file(FD, M, N8, - [<<N8:32/unsigned, N7:32/unsigned, - N6:32/unsigned, N5:32/unsigned, - N4:32/unsigned, N3:32/unsigned, - N2:32/unsigned, N1:32/unsigned>> | R]); -create_file(FD, M, N0, R) -> - N1 = N0-1, - create_file(FD, M, N1, [<<N1:32/unsigned>> | R]).]]></code> +create_file_1(Fd, M) when M >= 128 -> + ok = file:write(Fd, <<0:(128)/unit:8>>), + create_file_1(Fd, M - 128); +create_file_1(Fd, M) -> + ok = file:write(Fd, <<0:(M)/unit:8>>), + create_file_1(Fd, M - 1).]]></code> - <note> - <p>Trust only your own benchmarks. If the list length in - <c>create_file/2</c> above is increased, it runs slightly - faster, but consumes more memory and causes more memory - fragmentation. How much this affects your application is - something that this simple benchmark cannot predict.</p> - <p>If the size of each binary is increased to 64 bytes, it - also runs slightly faster, but the code is then twice as clumsy. - In the current implementation, binaries larger than 64 bytes are - stored in memory common to all processes and not copied when - sent between processes, while these smaller binaries are stored - on the process heap and copied when sent like any other term.</p> - <p>So, with a binary size of 68 bytes, <c>create_file/2</c> runs - 30 percent slower than with 64 bytes, and causes much more - memory fragmentation. Notice that if the binaries were to be sent - between processes (for example, a non-raw file), the results - would probably be completely different.</p> - </note> - <p>A raw file is really a port. When writing data to a port, it is - efficient to write a list of binaries. It is not needed to - flatten a deep list before writing. On Unix hosts, scatter output, - which writes a set of buffers in one operation, is used when - possible. In this way <c>write(FD, [Bin1, Bin2 | Bin3])</c> - writes the contents of the binaries without copying the data - at all, except for perhaps deep down in the operating system - kernel.</p> - <p>For raw files, <c>pwrite/2</c> and <c>pread/2</c> are - efficiently implemented. The file driver is called only once for - the whole operation, and the list iteration is done in the file - driver.</p> - <p>The options <c>delayed_write</c> and <c>read_ahead</c> to - <seealso marker="#open/2"><c>open/2</c></seealso> - make the file driver cache data to reduce - the number of operating system calls. The function - <c>create_file/2</c> in the recent example takes 60 seconds - without option <c>delayed_write</c>, which is 2.6 - times slower.</p> - <p>As a bad example, <c>create_file_slow/2</c> - without options <c>raw</c>, <c>binary</c>, and <c>delayed_write</c>, - meaning it calls <c>open(Name, [write])</c>, needs - 1 min 20 seconds for the job, which is 3.5 times slower than - the first example, and 150 times slower than the optimized - <c>create_file/2</c>.</p> - <warning> - <p>If an error occurs when accessing an open file with module - <seealso marker="stdlib:io"><c>io</c></seealso>, - the process handling the file exits. The dead - file process can hang if a process tries to access it later. - This will be fixed in a future release.</p> - </warning> + <p>When writing data it's generally more efficient to write a list of + binaries rather than a list of integers. It is not needed to + flatten a deep list before writing. On Unix hosts, scatter output, + which writes a set of buffers in one operation, is used when + possible. In this way <c>write(FD, [Bin1, Bin2 | Bin3])</c> + writes the contents of the binaries without copying the data + at all, except for perhaps deep down in the operating system + kernel.</p> + <warning> + <p>If an error occurs when accessing an open file with module + <seealso marker="stdlib:io"><c>io</c></seealso>, the process + handling the file exits. The dead file process can hang if a process + tries to access it later. This will be fixed in a future release. + </p> + </warning> </section> <section> diff --git a/lib/kernel/doc/src/inet.xml b/lib/kernel/doc/src/inet.xml index 169a76463b..abb045b744 100644 --- a/lib/kernel/doc/src/inet.xml +++ b/lib/kernel/doc/src/inet.xml @@ -197,6 +197,9 @@ fe80::204:acff:fe17:bf38 <datatype> <name name="address_family"/> </datatype> + <datatype> + <name name="socket_protocol"/> + </datatype> </datatypes> <funcs> @@ -461,6 +464,61 @@ get_tcpi_sacked(Sock) -> </func> <func> + <name name="i" arity="0" /> + <name name="i" arity="1" /> + <name name="i" arity="2" /> + <fsummary>Displays information and statistics about sockets on the terminal</fsummary> + <desc> + <p> + Lists all TCP, UDP and SCTP sockets, including those that the Erlang runtime system uses as well as + those created by the application. + </p> + <p> + The following options are available: + </p> + + <taglist> + <tag><c>port</c></tag> + <item> + <p>The internal index of the port.</p> + </item> + <tag><c>module</c></tag> + <item> + <p>The callback module of the socket.</p> + </item> + <tag><c>recv</c></tag> + <item> + <p>Number of bytes received by the socket.</p> + </item> + <tag><c>sent</c></tag> + <item> + <p>Number of bytes sent from the socket.</p> + </item> + <tag><c>owner</c></tag> + <item> + <p>The socket owner process.</p> + </item> + <tag><c>local_address</c></tag> + <item> + <p>The local address of the socket.</p> + </item> + <tag><c>foreign_address</c></tag> + <item> + <p>The address and port of the other end of the connection.</p> + </item> + <tag><c>state</c></tag> + <item> + <p>The connection state.</p> + </item> + <tag><c>type</c></tag> + <item> + <p>STREAM or DGRAM or SEQPACKET.</p> + </item> + </taglist> + </desc> + </func> + + <func> <name name="ntoa" arity="1" /> <fsummary>Convert IPv6/IPV4 address to ASCII.</fsummary> <desc> @@ -1214,7 +1272,7 @@ inet:setopts(Sock,[{raw,6,8,<<30:32/native>>}]),]]></code> For one-to-many style sockets, the special value <c>0</c> is defined to mean that the returned addresses must be without any particular association. - How different SCTP implementations interprets this varies somewhat. + How different SCTP implementations interpret this varies somewhat. </p> </desc> </func> diff --git a/lib/kernel/doc/src/inet_res.xml b/lib/kernel/doc/src/inet_res.xml index 4ada4203c0..3454e3c6f9 100644 --- a/lib/kernel/doc/src/inet_res.xml +++ b/lib/kernel/doc/src/inet_res.xml @@ -130,7 +130,7 @@ dns_header() = DnsHeader inet_dns:header(DnsHeader) -> [ {id, integer()} | {qr, boolean()} - | {opcode, 'query' | iquery | status | integer()} + | {opcode, query | iquery | status | integer()} | {aa, boolean()} | {tc, boolean()} | {rd, boolean()} diff --git a/lib/kernel/doc/src/net_kernel.xml b/lib/kernel/doc/src/net_kernel.xml index 0b94fc0fa6..a30d28d55a 100644 --- a/lib/kernel/doc/src/net_kernel.xml +++ b/lib/kernel/doc/src/net_kernel.xml @@ -56,7 +56,7 @@ $ <input>erl -sname foobar</input></pre> <p>Normally, connections are established automatically when another node is referenced. This functionality can be disabled by setting Kernel configuration parameter - <c>dist_auto_connect</c> to <c>false</c>, see + <c>dist_auto_connect</c> to <c>never</c>, see <seealso marker="kernel_app"><c>kernel(6)</c></seealso>. In this case, connections must be established explicitly by calling <seealso marker="#connect_node/1"><c>connect_node/1</c></seealso>.</p> @@ -230,7 +230,12 @@ $ <input>erl -sname foobar</input></pre> <item> <p>The tuple <c>{nodedown_reason, Reason}</c> is included in <c>InfoList</c> in <c>nodedown</c> messages.</p> - <p><c>Reason</c> can be any of the following:</p> + <p> + <c>Reason</c> can, depending on which + distribution module or process that is used be any term, + but for the standard TCP distribution module it is + any of the following: + </p> <taglist> <tag><c>connection_setup_failed</c></tag> <item><p>The connection setup failed (after <c>nodeup</c> diff --git a/lib/kernel/doc/src/os.xml b/lib/kernel/doc/src/os.xml index 7ce2f54542..ef416ed233 100644 --- a/lib/kernel/doc/src/os.xml +++ b/lib/kernel/doc/src/os.xml @@ -36,11 +36,85 @@ only run on a specific platform. On the other hand, with careful use, these functions can be of help in enabling a program to run on most platforms.</p> + + <note> + <p> + File operations used to accept filenames containing + null characters (integer value zero). This caused + the name to be truncated and in some cases arguments + to primitive operations to be mixed up. Filenames + containing null characters inside the filename + are now <em>rejected</em> and will cause primitive + file operations to fail. + </p> + <p> + Also environment variable operations used to accept + names and values of environment variables containing + null characters (integer value zero). This caused + operations to silently produce erroneous results. + Environment variable names and values containing + null characters inside the name or value are now + <em>rejected</em> and will cause environment variable + operations to fail. + </p> + </note> </description> <datatypes> <datatype> + <name name="env_var_name"/> + <desc> + <p>A string containing valid characters on the specific + OS for environment variable names using + <seealso marker="file#native_name_encoding/0"><c>file:native_name_encoding()</c></seealso> + encoding. Note that specifically null characters (integer + value zero) and <c>$=</c> characters are not allowed. + However, note that not all invalid characters necessarily + will cause the primitiv operations to fail, but may instead + produce invalid results. + </p> + </desc> + </datatype> + <datatype> + <name name="env_var_value"/> + <desc> + <p>A string containing valid characters on the specific + OS for environment variable values using + <seealso marker="file#native_name_encoding/0"><c>file:native_name_encoding()</c></seealso> + encoding. Note that specifically null characters (integer + value zero) are not allowed. However, note that not all + invalid characters necessarily will cause the primitiv + operations to fail, but may instead produce invalid results. + </p> + </desc> + </datatype> + <datatype> + <name name="env_var_name_value"/> + <desc> + <p> + Assuming that environment variables has been correctly + set, a strings containing valid characters on the specific + OS for environment variable names and values using + <seealso marker="file#native_name_encoding/0"><c>file:native_name_encoding()</c></seealso> + encoding. The first <c>$=</c> characters appearing in + the string separates environment variable name (on the + left) from environment variable value (on the right). + </p> + </desc> + </datatype> + <datatype> <name name="os_command"/> + <desc> + <p>All characters needs to be valid characters on the + specific OS using + <seealso marker="file#native_name_encoding/0"><c>file:native_name_encoding()</c></seealso> + encoding. Note that specifically null characters (integer + value zero) are not allowed. However, note that not all + invalid characters not necessarily will cause + <seealso marker="#cmd/1"><c>os:cmd/1</c></seealso> + to fail, but may instead produce invalid results. + </p> + </desc> </datatype> <datatype> <name name="os_command_opts"/> @@ -65,8 +139,13 @@ <fsummary>Execute a command in a shell of the target OS.</fsummary> <desc> <p>Executes <c><anno>Command</anno></c> in a command shell of the - target OS, captures the standard output of the command, + target OS, captures the standard output of the command, and returns this result as a string.</p> + <warning><p>Previous implementation used to allow all characters + as long as they were integer values greater than or equal to zero. + This sometimes lead to unwanted results since null characters + (integer value zero) often are interpreted as string termination. The + current implementation rejects these.</p></warning> <p><em>Examples:</em></p> <code type="none"> LsOut = os:cmd("ls"), % on unix platform @@ -185,6 +264,15 @@ DirOut = os:cmd("dir"), % on Win32 platform</code> <p>On Unix platforms, the environment is set using UTF-8 encoding if Unicode filename translation is in effect. On Windows, the environment is set using wide character interfaces.</p> + <note> + <p> + <c><anno>VarName</anno></c> is not allowed to contain + an <c>$=</c> character. Previous implementations used + to just let the <c>$=</c> character through which + silently caused erroneous results. Current implementation + will instead throw a <c>badarg</c> exception. + </p> + </note> </desc> </func> diff --git a/lib/kernel/examples/Makefile b/lib/kernel/examples/Makefile index 26ec58f571..f86e662838 100644 --- a/lib/kernel/examples/Makefile +++ b/lib/kernel/examples/Makefile @@ -45,7 +45,7 @@ RELSYSDIR = $(RELEASE_PATH)/lib/kernel-$(KERNEL_VSN)/examples # Pack and install the complete directory structure from # here (CWD) and down, for all examples. -EXAMPLES = uds_dist +EXAMPLES = uds_dist gen_tcp_dist release_spec: $(INSTALL_DIR) "$(RELSYSDIR)" diff --git a/lib/kernel/examples/gen_tcp_dist/Makefile b/lib/kernel/examples/gen_tcp_dist/Makefile new file mode 100644 index 0000000000..65513a1729 --- /dev/null +++ b/lib/kernel/examples/gen_tcp_dist/Makefile @@ -0,0 +1,20 @@ +RM=rm -f +CP=cp +EBIN=ebin +ERLC=erlc +# Works if building in open source source tree +KERNEL_INCLUDE=$(ERL_TOP)/lib/kernel/include +ERLCFLAGS+= -W -I$(KERNEL_INCLUDE) + +MODULES=gen_tcp_dist + +TARGET_FILES=$(MODULES:%=$(EBIN)/%.beam) + +opt: $(TARGET_FILES) + +$(EBIN)/%.beam: src/%.erl + $(ERLC) $(ERLCFLAGS) -o$(EBIN) $< + +clean: + $(RM) $(TARGET_FILES) + diff --git a/lib/kernel/examples/gen_tcp_dist/ebin/.gitignore b/lib/kernel/examples/gen_tcp_dist/ebin/.gitignore new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/lib/kernel/examples/gen_tcp_dist/ebin/.gitignore diff --git a/lib/kernel/examples/gen_tcp_dist/src/gen_tcp_dist.erl b/lib/kernel/examples/gen_tcp_dist/src/gen_tcp_dist.erl new file mode 100644 index 0000000000..98554ed805 --- /dev/null +++ b/lib/kernel/examples/gen_tcp_dist/src/gen_tcp_dist.erl @@ -0,0 +1,781 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2017. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +%% +-module(gen_tcp_dist). + +%% +%% This is an example of how to plug in an arbitrary distribution +%% carrier for Erlang using distribution processes. +%% +%% This example uses gen_tcp for transportation of data, but +%% you can use whatever underlying protocol you want as long +%% as your implementation reliably delivers data chunks to the +%% receiving VM in the order they were sent from the sending +%% VM. +%% +%% This code is a rewrite of the lib/kernel/src/inet_tcp_dist.erl +%% distribution impementation for TCP used by default. That +%% implementation use distribution ports instead of distribution +%% processes and is more efficient compared to this implementation. +%% This since this implementation more or less gets the +%% distribution processes in between the VM and the ports without +%% any gain specific gain. +%% + +-export([listen/1, accept/1, accept_connection/5, + setup/5, close/1, select/1, is_node_name/1]). + +%% Optional +-export([setopts/2, getopts/2]). + +%% internal exports + +-export([dist_cntrlr_setup/1, dist_cntrlr_input_setup/3, + dist_cntrlr_tick_handler/1]). + +-export([accept_loop/2,do_accept/6,do_setup/6]). + +-import(error_logger,[error_msg/2]). + +-include("net_address.hrl"). + +-include("dist.hrl"). +-include("dist_util.hrl"). + +%% ------------------------------------------------------------ +%% Select this protocol based on node name +%% select(Node) => Bool +%% ------------------------------------------------------------ + +select(Node) -> + case split_node(atom_to_list(Node), $@, []) of + [_, Host] -> + case inet:getaddr(Host, inet) of + {ok,_} -> true; + _ -> false + end; + _ -> false + end. + +%% ------------------------------------------------------------ +%% Create the listen socket, i.e. the port that this erlang +%% node is accessible through. +%% ------------------------------------------------------------ + +listen(Name) -> + case do_listen([binary, {active, false}, {packet,2}, {reuseaddr, true}]) of + {ok, Socket} -> + TcpAddress = get_tcp_address(Socket), + {_,Port} = TcpAddress#net_address.address, + ErlEpmd = net_kernel:epmd_module(), + case ErlEpmd:register_node(Name, Port) of + {ok, Creation} -> + {ok, {Socket, TcpAddress, Creation}}; + Error -> + Error + end; + Error -> + Error + end. + +do_listen(Options) -> + {First,Last} = case application:get_env(kernel,inet_dist_listen_min) of + {ok,N} when is_integer(N) -> + case application:get_env(kernel, + inet_dist_listen_max) of + {ok,M} when is_integer(M) -> + {N,M}; + _ -> + {N,N} + end; + _ -> + {0,0} + end, + do_listen(First, Last, listen_options([{backlog,128}|Options])). + +do_listen(First,Last,_) when First > Last -> + {error,eaddrinuse}; +do_listen(First,Last,Options) -> + case gen_tcp:listen(First, Options) of + {error, eaddrinuse} -> + do_listen(First+1,Last,Options); + Other -> + Other + end. + +listen_options(Opts0) -> + Opts1 = + case application:get_env(kernel, inet_dist_use_interface) of + {ok, Ip} -> + [{ip, Ip} | Opts0]; + _ -> + Opts0 + end, + case application:get_env(kernel, inet_dist_listen_options) of + {ok,ListenOpts} -> + ListenOpts ++ Opts1; + _ -> + Opts1 + end. + + +%% ------------------------------------------------------------ +%% Accepts new connection attempts from other Erlang nodes. +%% ------------------------------------------------------------ + +accept(Listen) -> + spawn_opt(?MODULE, accept_loop, [self(), Listen], [link, {priority, max}]). + +accept_loop(Kernel, Listen) -> + ?trace("~p~n",[{?MODULE, accept_loop, self()}]), + case gen_tcp:accept(Listen) of + {ok, Socket} -> + DistCtrl = spawn_dist_cntrlr(Socket), + ?trace("~p~n",[{?MODULE, accept_loop, accepted, Socket, DistCtrl, self()}]), + flush_controller(DistCtrl, Socket), + gen_tcp:controlling_process(Socket, DistCtrl), + flush_controller(DistCtrl, Socket), + Kernel ! {accept,self(),DistCtrl,inet,tcp}, + receive + {Kernel, controller, Pid} -> + call_ctrlr(DistCtrl, {supervisor, Pid}), + Pid ! {self(), controller}; + {Kernel, unsupported_protocol} -> + exit(unsupported_protocol) + end, + accept_loop(Kernel, Listen); + Error -> + exit(Error) + end. + +flush_controller(Pid, Socket) -> + receive + {tcp, Socket, Data} -> + Pid ! {tcp, Socket, Data}, + flush_controller(Pid, Socket); + {tcp_closed, Socket} -> + Pid ! {tcp_closed, Socket}, + flush_controller(Pid, Socket) + after 0 -> + ok + end. + +%% ------------------------------------------------------------ +%% Accepts a new connection attempt from another Erlang node. +%% Performs the handshake with the other side. +%% ------------------------------------------------------------ + +accept_connection(AcceptPid, DistCtrl, MyNode, Allowed, SetupTime) -> + spawn_opt(?MODULE, do_accept, + [self(), AcceptPid, DistCtrl, MyNode, Allowed, SetupTime], + [link, {priority, max}]). + +do_accept(Kernel, AcceptPid, DistCtrl, MyNode, Allowed, SetupTime) -> + ?trace("~p~n",[{?MODULE, do_accept, self(), MyNode}]), + receive + {AcceptPid, controller} -> + Timer = dist_util:start_timer(SetupTime), + case check_ip(DistCtrl) of + true -> + HSData0 = hs_data_common(DistCtrl), + HSData = HSData0#hs_data{kernel_pid = Kernel, + this_node = MyNode, + socket = DistCtrl, + timer = Timer, + this_flags = 0, + allowed = Allowed}, + dist_util:handshake_other_started(HSData); + {false,IP} -> + error_msg("** Connection attempt from " + "disallowed IP ~w ** ~n", [IP]), + ?shutdown(no_node) + end + end. + +%% we may not always want the nodelay behaviour +%% for performance reasons + +nodelay() -> + case application:get_env(kernel, dist_nodelay) of + undefined -> + {nodelay, true}; + {ok, true} -> + {nodelay, true}; + {ok, false} -> + {nodelay, false}; + _ -> + {nodelay, true} + end. + +%% ------------------------------------------------------------ +%% Setup a new connection to another Erlang node. +%% Performs the handshake with the other side. +%% ------------------------------------------------------------ + +setup(Node, Type, MyNode, LongOrShortNames,SetupTime) -> + spawn_opt(?MODULE, do_setup, + [self(), Node, Type, MyNode, LongOrShortNames, SetupTime], + [link, {priority, max}]). + +do_setup(Kernel, Node, Type, MyNode, LongOrShortNames, SetupTime) -> + ?trace("~p~n",[{?MODULE, do_setup, self(), Node}]), + [Name, Address] = splitnode(Node, LongOrShortNames), + case inet:getaddr(Address, inet) of + {ok, Ip} -> + Timer = dist_util:start_timer(SetupTime), + ErlEpmd = net_kernel:epmd_module(), + case ErlEpmd:port_please(Name, Ip) of + {port, TcpPort, Version} -> + ?trace("port_please(~p) -> version ~p~n", + [Node,Version]), + dist_util:reset_timer(Timer), + case + gen_tcp:connect( + Ip, TcpPort, + connect_options([binary, {active, false}, {packet, 2}])) + of + {ok, Socket} -> + DistCtrl = spawn_dist_cntrlr(Socket), + call_ctrlr(DistCtrl, {supervisor, self()}), + flush_controller(DistCtrl, Socket), + gen_tcp:controlling_process(Socket, DistCtrl), + flush_controller(DistCtrl, Socket), + HSData0 = hs_data_common(DistCtrl), + HSData = HSData0#hs_data{kernel_pid = Kernel, + other_node = Node, + this_node = MyNode, + socket = DistCtrl, + timer = Timer, + this_flags = 0, + other_version = Version, + request_type = Type}, + dist_util:handshake_we_started(HSData); + _ -> + %% Other Node may have closed since + %% port_please ! + ?trace("other node (~p) " + "closed since port_please.~n", + [Node]), + ?shutdown(Node) + end; + _ -> + ?trace("port_please (~p) " + "failed.~n", [Node]), + ?shutdown(Node) + end; + _Other -> + ?trace("inet_getaddr(~p) " + "failed (~p).~n", [Node,_Other]), + ?shutdown(Node) + end. + +connect_options(Opts) -> + case application:get_env(kernel, inet_dist_connect_options) of + {ok,ConnectOpts} -> + ConnectOpts ++ Opts; + _ -> + Opts + end. + +%% +%% Close a socket. +%% +close(Listen) -> + gen_tcp:close(Listen). + + +%% If Node is illegal terminate the connection setup!! +splitnode(Node, LongOrShortNames) -> + case split_node(atom_to_list(Node), $@, []) of + [Name|Tail] when Tail =/= [] -> + Host = lists:append(Tail), + case split_node(Host, $., []) of + [_] when LongOrShortNames =:= longnames -> + case inet:parse_address(Host) of + {ok, _} -> + [Name, Host]; + _ -> + error_msg("** System running to use " + "fully qualified " + "hostnames **~n" + "** Hostname ~ts is illegal **~n", + [Host]), + ?shutdown(Node) + end; + L when length(L) > 1, LongOrShortNames =:= shortnames -> + error_msg("** System NOT running to use fully qualified " + "hostnames **~n" + "** Hostname ~ts is illegal **~n", + [Host]), + ?shutdown(Node); + _ -> + [Name, Host] + end; + [_] -> + error_msg("** Nodename ~p illegal, no '@' character **~n", + [Node]), + ?shutdown(Node); + _ -> + error_msg("** Nodename ~p illegal **~n", [Node]), + ?shutdown(Node) + end. + +split_node([Chr|T], Chr, Ack) -> [lists:reverse(Ack)|split_node(T, Chr, [])]; +split_node([H|T], Chr, Ack) -> split_node(T, Chr, [H|Ack]); +split_node([], _, Ack) -> [lists:reverse(Ack)]. + +%% ------------------------------------------------------------ +%% Fetch local information about a Socket. +%% ------------------------------------------------------------ +get_tcp_address(Socket) -> + {ok, Address} = inet:sockname(Socket), + {ok, Host} = inet:gethostname(), + #net_address { + address = Address, + host = Host, + protocol = tcp, + family = inet + }. + +%% ------------------------------------------------------------ +%% Do only accept new connection attempts from nodes at our +%% own LAN, if the check_ip environment parameter is true. +%% ------------------------------------------------------------ +check_ip(DistCtrl) -> + case application:get_env(check_ip) of + {ok, true} -> + case get_ifs(DistCtrl) of + {ok, IFs, IP} -> + check_ip(IFs, IP); + _ -> + ?shutdown(no_node) + end; + _ -> + true + end. + +get_ifs(DistCtrl) -> + Socket = call_ctrlr(DistCtrl, socket), + case inet:peername(Socket) of + {ok, {IP, _}} -> + case inet:getif(Socket) of + {ok, IFs} -> {ok, IFs, IP}; + Error -> Error + end; + Error -> + Error + end. + +check_ip([{OwnIP, _, Netmask}|IFs], PeerIP) -> + case {inet_tcp:mask(Netmask, PeerIP), inet_tcp:mask(Netmask, OwnIP)} of + {M, M} -> true; + _ -> check_ip(IFs, PeerIP) + end; +check_ip([], PeerIP) -> + {false, PeerIP}. + +is_node_name(Node) when is_atom(Node) -> + case split_node(atom_to_list(Node), $@, []) of + [_, _Host] -> true; + _ -> false + end; +is_node_name(_Node) -> + false. + +hs_data_common(DistCtrl) -> + TickHandler = call_ctrlr(DistCtrl, tick_handler), + Socket = call_ctrlr(DistCtrl, socket), + #hs_data{f_send = send_fun(), + f_recv = recv_fun(), + f_setopts_pre_nodeup = setopts_pre_nodeup_fun(), + f_setopts_post_nodeup = setopts_post_nodeup_fun(), + f_getll = getll_fun(), + f_handshake_complete = handshake_complete_fun(), + f_address = address_fun(), + mf_setopts = setopts_fun(DistCtrl, Socket), + mf_getopts = getopts_fun(DistCtrl, Socket), + mf_getstat = getstat_fun(DistCtrl, Socket), + mf_tick = tick_fun(DistCtrl, TickHandler)}. + +%%% ------------------------------------------------------------ +%%% Distribution controller processes +%%% ------------------------------------------------------------ + +%% +%% There will be five parties working together when the +%% connection is up: +%% - The gen_tcp socket. Providing a tcp/ip connection +%% to the other node. +%% - The output handler. It will dispatch all outgoing +%% traffic from the VM to the gen_tcp socket. This +%% process is registered as distribution controller +%% for this channel with the VM. +%% - The input handler. It will dispatch all incoming +%% traffic from the gen_tcp socket to the VM. This +%% process is also the socket owner and receives +%% incoming traffic using active-N. +%% - The tick handler. Dispatches asynchronous tick +%% requests to the socket. It executes on max priority +%% since it is important to get ticks through to the +%% other end. +%% - The channel supervisor (provided by dist_util). It +%% monitors traffic. Issue tick requests to the tick +%% handler when no outgoing traffic is seen and bring +%% the connection down if no incoming traffic is seen. +%% This process also executes on max priority. +%% +%% These parties are linked togheter so should one +%% of them fail, all of them are terminated and the +%% connection is taken down. +%% + +%% In order to avoid issues with lingering signal binaries +%% we enable off-heap message queue data as well as fullsweep +%% after 0. The fullsweeps will be cheap since we have more +%% or less no live data. +-define(DIST_CNTRL_COMMON_SPAWN_OPTS, + [{message_queue_data, off_heap}, + {fullsweep_after, 0}]). + +tick_fun(DistCtrl, TickHandler) -> + fun (Ctrl) when Ctrl == DistCtrl -> + TickHandler ! tick + end. + +getstat_fun(DistCtrl, Socket) -> + fun (Ctrl) when Ctrl == DistCtrl -> + case inet:getstat(Socket, [recv_cnt, send_cnt, send_pend]) of + {ok, Stat} -> + split_stat(Stat,0,0,0); + Error -> + Error + end + end. + +split_stat([{recv_cnt, R}|Stat], _, W, P) -> + split_stat(Stat, R, W, P); +split_stat([{send_cnt, W}|Stat], R, _, P) -> + split_stat(Stat, R, W, P); +split_stat([{send_pend, P}|Stat], R, W, _) -> + split_stat(Stat, R, W, P); +split_stat([], R, W, P) -> + {ok, R, W, P}. + +setopts_fun(DistCtrl, Socket) -> + fun (Ctrl, Opts) when Ctrl == DistCtrl -> + setopts(Socket, Opts) + end. + +getopts_fun(DistCtrl, Socket) -> + fun (Ctrl, Opts) when Ctrl == DistCtrl -> + getopts(Socket, Opts) + end. + +setopts(S, Opts) -> + case [Opt || {K,_}=Opt <- Opts, + K =:= active orelse K =:= deliver orelse K =:= packet] of + [] -> inet:setopts(S,Opts); + Opts1 -> {error, {badopts,Opts1}} + end. + +getopts(S, Opts) -> + inet:getopts(S, Opts). + +send_fun() -> + fun (Ctrlr, Packet) -> + call_ctrlr(Ctrlr, {send, Packet}) + end. + +recv_fun() -> + fun (Ctrlr, Length, Timeout) -> + case call_ctrlr(Ctrlr, {recv, Length, Timeout}) of + {ok, Bin} when is_binary(Bin) -> + {ok, binary_to_list(Bin)}; + Other -> + Other + end + end. + +getll_fun() -> + fun (Ctrlr) -> + call_ctrlr(Ctrlr, getll) + end. + +address_fun() -> + fun (Ctrlr, Node) -> + case call_ctrlr(Ctrlr, {address, Node}) of + {error, no_node} -> %% No '@' or more than one '@' in node name. + ?shutdown(no_node); + Res -> + Res + end + end. + +setopts_pre_nodeup_fun() -> + fun (Ctrlr) -> + call_ctrlr(Ctrlr, pre_nodeup) + end. + +setopts_post_nodeup_fun() -> + fun (Ctrlr) -> + call_ctrlr(Ctrlr, post_nodeup) + end. + +handshake_complete_fun() -> + fun (Ctrlr, Node, DHandle) -> + call_ctrlr(Ctrlr, {handshake_complete, Node, DHandle}) + end. + +call_ctrlr(Ctrlr, Msg) -> + Ref = erlang:monitor(process, Ctrlr), + Ctrlr ! {Ref, self(), Msg}, + receive + {Ref, Res} -> + erlang:demonitor(Ref, [flush]), + Res; + {'DOWN', Ref, process, Ctrlr, Reason} -> + exit({dist_controller_exit, Reason}) + end. + +%% +%% The tick handler process writes a tick to the +%% socket when it receives a 'tick' message from +%% the connection supervisor. +%% +%% We are not allowed to block the connection +%% superviser when writing a tick and we also want +%% the tick to go through even during a heavily +%% loaded system. gen_tcp does not have a +%% non-blocking send operation exposed in its API +%% and we don't want to run the distribution +%% controller under high priority. Therefore this +%% sparate process with max prio that dispatches +%% ticks. +%% +dist_cntrlr_tick_handler(Socket) -> + receive + tick -> + %% May block due to busy port... + sock_send(Socket, ""); + _ -> + ok + end, + dist_cntrlr_tick_handler(Socket). + +spawn_dist_cntrlr(Socket) -> + spawn_opt(?MODULE, dist_cntrlr_setup, [Socket], + [{priority, max}] ++ ?DIST_CNTRL_COMMON_SPAWN_OPTS). + +dist_cntrlr_setup(Socket) -> + TickHandler = spawn_opt(?MODULE, dist_cntrlr_tick_handler, + [Socket], + [link, {priority, max}] + ++ ?DIST_CNTRL_COMMON_SPAWN_OPTS), + dist_cntrlr_setup_loop(Socket, TickHandler, undefined). + +%% +%% During the handshake phase we loop in dist_cntrlr_setup(). +%% When the connection is up we spawn an input handler and +%% continue as output handler. +%% +dist_cntrlr_setup_loop(Socket, TickHandler, Sup) -> + receive + {tcp_closed, Socket} -> + exit(connection_closed); + + {Ref, From, {supervisor, Pid}} -> + Res = link(Pid), + From ! {Ref, Res}, + dist_cntrlr_setup_loop(Socket, TickHandler, Pid); + + {Ref, From, tick_handler} -> + From ! {Ref, TickHandler}, + dist_cntrlr_setup_loop(Socket, TickHandler, Sup); + + {Ref, From, socket} -> + From ! {Ref, Socket}, + dist_cntrlr_setup_loop(Socket, TickHandler, Sup); + + {Ref, From, {send, Packet}} -> + Res = gen_tcp:send(Socket, Packet), + From ! {Ref, Res}, + dist_cntrlr_setup_loop(Socket, TickHandler, Sup); + + {Ref, From, {recv, Length, Timeout}} -> + Res = gen_tcp:recv(Socket, Length, Timeout), + From ! {Ref, Res}, + dist_cntrlr_setup_loop(Socket, TickHandler, Sup); + + {Ref, From, getll} -> + From ! {Ref, {ok, self()}}, + dist_cntrlr_setup_loop(Socket, TickHandler, Sup); + + {Ref, From, {address, Node}} -> + Res = case inet:peername(Socket) of + {ok, Address} -> + case split_node(atom_to_list(Node), $@, []) of + [_,Host] -> + #net_address{address=Address,host=Host, + protocol=tcp, family=inet}; + _ -> + {error, no_node} + end + end, + From ! {Ref, Res}, + dist_cntrlr_setup_loop(Socket, TickHandler, Sup); + + {Ref, From, pre_nodeup} -> + Res = inet:setopts(Socket, + [{active, false}, + {packet, 4}, + nodelay()]), + From ! {Ref, Res}, + dist_cntrlr_setup_loop(Socket, TickHandler, Sup); + + {Ref, From, post_nodeup} -> + Res = inet:setopts(Socket, + [{active, false}, + {packet, 4}, + nodelay()]), + From ! {Ref, Res}, + dist_cntrlr_setup_loop(Socket, TickHandler, Sup); + + {Ref, From, {handshake_complete, _Node, DHandle}} -> + From ! {Ref, ok}, + %% Handshake complete! Begin dispatching traffic... + + %% We use separate process for dispatching input. This + %% is not necessary, but it enables parallel execution + %% of independent work loads at the same time as it + %% simplifies the the implementation... + InputHandler = spawn_opt(?MODULE, dist_cntrlr_input_setup, + [DHandle, Socket, Sup], + [link] ++ ?DIST_CNTRL_COMMON_SPAWN_OPTS), + + flush_controller(InputHandler, Socket), + gen_tcp:controlling_process(Socket, InputHandler), + flush_controller(InputHandler, Socket), + + ok = erlang:dist_ctrl_input_handler(DHandle, InputHandler), + + InputHandler ! DHandle, + + %% From now on we execute on normal priority + process_flag(priority, normal), + erlang:dist_ctrl_get_data_notification(DHandle), + dist_cntrlr_output_loop(DHandle, Socket) + end. + +%% We use active 10 for good throughput while still +%% maintaining back-pressure if the input controller +%% isn't able to handle all incoming messages... +-define(ACTIVE_INPUT, 10). + +dist_cntrlr_input_setup(DHandle, Socket, Sup) -> + link(Sup), + %% Ensure we don't try to put data before registerd + %% as input handler... + receive + DHandle -> + dist_cntrlr_input_loop(DHandle, Socket, 0) + end. + +dist_cntrlr_input_loop(DHandle, Socket, N) when N =< ?ACTIVE_INPUT/2 -> + inet:setopts(Socket, [{active, ?ACTIVE_INPUT - N}]), + dist_cntrlr_input_loop(DHandle, Socket, ?ACTIVE_INPUT); +dist_cntrlr_input_loop(DHandle, Socket, N) -> + receive + {tcp_closed, Socket} -> + %% Connection to remote node terminated... + exit(connection_closed); + + {tcp, Socket, Data} -> + %% Incoming data from remote node... + try erlang:dist_ctrl_put_data(DHandle, Data) + catch _ : _ -> death_row() + end, + dist_cntrlr_input_loop(DHandle, Socket, N-1); + + _ -> + %% Ignore... + dist_cntrlr_input_loop(DHandle, Socket, N) + end. + +dist_cntrlr_send_data(DHandle, Socket) -> + case erlang:dist_ctrl_get_data(DHandle) of + none -> + erlang:dist_ctrl_get_data_notification(DHandle); + Data -> + sock_send(Socket, Data), + dist_cntrlr_send_data(DHandle, Socket) + end. + + +dist_cntrlr_output_loop(DHandle, Socket) -> + receive + dist_data -> + %% Outgoing data from this node... + try dist_cntrlr_send_data(DHandle, Socket) + catch _ : _ -> death_row() + end, + dist_cntrlr_output_loop(DHandle, Socket); + + {send, From, Ref, Data} -> + %% This is for testing only! + %% + %% Needed by some OTP distribution + %% test suites... + sock_send(Socket, Data), + From ! {Ref, ok}, + dist_cntrlr_output_loop(DHandle, Socket); + + _ -> + %% Drop garbage message... + dist_cntrlr_output_loop(DHandle, Socket) + + end. + +sock_send(Socket, Data) -> + try gen_tcp:send(Socket, Data) of + ok -> ok; + {error, Reason} -> death_row({send_error, Reason}) + catch + Type : Reason -> death_row({send_error, {Type, Reason}}) + end. + +death_row() -> + death_row(connection_closed). + +death_row(normal) -> + %% We do not want to exit with normal + %% exit reason since it wont bring down + %% linked processes... + death_row(); +death_row(Reason) -> + %% When the connection is on its way down operations + %% begin to fail. We catch the failures and call + %% this function waiting for termination. We should + %% be terminated by one of our links to the other + %% involved parties that began bringing the + %% connection down. By waiting for termination we + %% avoid altering the exit reason for the connection + %% teardown. We however limit the wait to 5 seconds + %% and bring down the connection ourselves if not + %% terminated... + receive after 5000 -> exit(Reason) end. diff --git a/lib/kernel/include/dist.hrl b/lib/kernel/include/dist.hrl index d6bccdf474..db4a5eaebc 100644 --- a/lib/kernel/include/dist.hrl +++ b/lib/kernel/include/dist.hrl @@ -40,3 +40,33 @@ -define(DFLAG_UTF8_ATOMS, 16#10000). -define(DFLAG_MAP_TAG, 16#20000). -define(DFLAG_BIG_CREATION, 16#40000). +-define(DFLAG_SEND_SENDER, 16#80000). + +%% DFLAGs that require strict ordering or:ed together... +-define(DFLAGS_STRICT_ORDER_DELIVERY, + ?DFLAG_DIST_HDR_ATOM_CACHE). + + +%% Also update dflag2str() in ../src/dist_util.erl +%% when adding flags... + +-define(DFLAGS_ALL, + (?DFLAG_PUBLISHED + bor ?DFLAG_ATOM_CACHE + bor ?DFLAG_EXTENDED_REFERENCES + bor ?DFLAG_DIST_MONITOR + bor ?DFLAG_FUN_TAGS + bor ?DFLAG_DIST_MONITOR_NAME + bor ?DFLAG_HIDDEN_ATOM_CACHE + bor ?DFLAG_NEW_FUN_TAGS + bor ?DFLAG_EXTENDED_PIDS_PORTS + bor ?DFLAG_EXPORT_PTR_TAG + bor ?DFLAG_BIT_BINARIES + bor ?DFLAG_NEW_FLOATS + bor ?DFLAG_UNICODE_IO + bor ?DFLAG_DIST_HDR_ATOM_CACHE + bor ?DFLAG_SMALL_ATOM_TAGS + bor ?DFLAG_UTF8_ATOMS + bor ?DFLAG_MAP_TAG + bor ?DFLAG_BIG_CREATION + bor ?DFLAG_SEND_SENDER)). diff --git a/lib/kernel/include/dist_util.hrl b/lib/kernel/include/dist_util.hrl index e3d2fe0eb6..eeb0f8dd43 100644 --- a/lib/kernel/include/dist_util.hrl +++ b/lib/kernel/include/dist_util.hrl @@ -29,9 +29,9 @@ -endif. -ifdef(dist_trace). --define(trace(Fmt,Args), io:format("~p ~p:~s",[erlang:timestamp(),node(),lists:flatten(io_lib:format(Fmt, Args))])). +-define(trace(Fmt,Args), io:format("~p ~p:~s",[erlang:convert_time_unit(erlang:monotonic_time()-erlang:system_info(start_time), native, microsecond),node(),lists:flatten(io_lib:format(Fmt, Args))])). % Use the one below for config-file (early boot) connection tracing -%-define(trace(Fmt,Args), erlang:display([erlang:now(),node(),lists:flatten(io_lib:format(Fmt, Args))])). +%-define(trace(Fmt,Args), erlang:display([erlang:convert_time_unit(erlang:monotonic_time()-erlang:system_info(start_time), native, microsecond),node(),lists:flatten(io_lib:format(Fmt, Args))])). -define(trace_factor,8). -else. -define(trace(Fmt,Args), ok). @@ -78,7 +78,13 @@ %% New in kernel-5.1 (OTP 19.1): mf_setopts, %% netkernel:setopts on active connection - mf_getopts %% netkernel:getopts on active connection + mf_getopts, %% netkernel:getopts on active connection + + %% New in kernel-6.0 (OTP 21.0) + f_handshake_complete, %% Notify handshake complete + add_flags, %% dflags to add + reject_flags, %% dflags not to use (not all can be rejected) + require_flags %% dflags that are required }). diff --git a/lib/kernel/src/Makefile b/lib/kernel/src/Makefile index 5946620f0f..0bc9f121a0 100644 --- a/lib/kernel/src/Makefile +++ b/lib/kernel/src/Makefile @@ -106,6 +106,7 @@ MODULES = \ inet_sctp \ kernel \ kernel_config \ + kernel_refc \ local_udp \ local_tcp \ net \ @@ -120,6 +121,13 @@ MODULES = \ user \ user_drv \ user_sup \ + raw_file_io \ + raw_file_io_compressed \ + raw_file_io_inflate \ + raw_file_io_deflate \ + raw_file_io_delayed \ + raw_file_io_list \ + raw_file_io_raw \ wrap_log_reader HRL_FILES= ../include/file.hrl ../include/inet.hrl ../include/inet_sctp.hrl \ @@ -226,7 +234,8 @@ $(EBIN)/disk_log_server.beam: disk_log.hrl $(EBIN)/dist_util.beam: ../include/dist_util.hrl ../include/dist.hrl $(EBIN)/erl_boot_server.beam: inet_boot.hrl $(EBIN)/erl_epmd.beam: inet_int.hrl erl_epmd.hrl -$(EBIN)/file.beam: ../include/file.hrl +$(EBIN)/file.beam: ../include/file.hrl file_int.hrl +$(EBIN)/file_io_server.beam: ../include/file.hrl file_int.hrl $(EBIN)/gen_tcp.beam: inet_int.hrl $(EBIN)/gen_udp.beam: inet_int.hrl $(EBIN)/gen_sctp.beam: ../include/inet_sctp.hrl @@ -254,3 +263,10 @@ $(EBIN)/net_kernel.beam: ../include/net_address.hrl $(EBIN)/os.beam: ../include/file.hrl $(EBIN)/ram_file.beam: ../include/file.hrl $(EBIN)/wrap_log_reader.beam: disk_log.hrl ../include/file.hrl +$(EBIN)/raw_file_io.beam: ../include/file.hrl file_int.hrl +$(EBIN)/raw_file_io_compressed.beam: ../include/file.hrl file_int.hrl +$(EBIN)/raw_file_io_inflate.beam: ../include/file.hrl file_int.hrl +$(EBIN)/raw_file_io_deflate.beam: ../include/file.hrl file_int.hrl +$(EBIN)/raw_file_io_delayed.beam: ../include/file.hrl file_int.hrl +$(EBIN)/raw_file_io_list.beam: ../include/file.hrl file_int.hrl +$(EBIN)/raw_file_io_raw.beam: ../include/file.hrl file_int.hrl diff --git a/lib/kernel/src/dist_util.erl b/lib/kernel/src/dist_util.erl index b3507e5d13..5ea0ca991f 100644 --- a/lib/kernel/src/dist_util.erl +++ b/lib/kernel/src/dist_util.erl @@ -74,6 +74,48 @@ ticked = 0 }). +dflag2str(?DFLAG_PUBLISHED) -> + "PUBLISHED"; +dflag2str(?DFLAG_ATOM_CACHE) -> + "ATOM_CACHE"; +dflag2str(?DFLAG_EXTENDED_REFERENCES) -> + "EXTENDED_REFERENCES"; +dflag2str(?DFLAG_DIST_MONITOR) -> + "DIST_MONITOR"; +dflag2str(?DFLAG_FUN_TAGS) -> + "FUN_TAGS"; +dflag2str(?DFLAG_DIST_MONITOR_NAME) -> + "DIST_MONITOR_NAME"; +dflag2str(?DFLAG_HIDDEN_ATOM_CACHE) -> + "HIDDEN_ATOM_CACHE"; +dflag2str(?DFLAG_NEW_FUN_TAGS) -> + "NEW_FUN_TAGS"; +dflag2str(?DFLAG_EXTENDED_PIDS_PORTS) -> + "EXTENDED_PIDS_PORTS"; +dflag2str(?DFLAG_EXPORT_PTR_TAG) -> + "EXPORT_PTR_TAG"; +dflag2str(?DFLAG_BIT_BINARIES) -> + "BIT_BINARIES"; +dflag2str(?DFLAG_NEW_FLOATS) -> + "NEW_FLOATS"; +dflag2str(?DFLAG_UNICODE_IO) -> + "UNICODE_IO"; +dflag2str(?DFLAG_DIST_HDR_ATOM_CACHE) -> + "DIST_HDR_ATOM_CACHE"; +dflag2str(?DFLAG_SMALL_ATOM_TAGS) -> + "SMALL_ATOM_TAGS"; +dflag2str(?DFLAG_UTF8_ATOMS) -> + "UTF8_ATOMS"; +dflag2str(?DFLAG_MAP_TAG) -> + "MAP_TAG"; +dflag2str(?DFLAG_BIG_CREATION) -> + "BIG_CREATION"; +dflag2str(?DFLAG_SEND_SENDER) -> + "SEND_SENDER"; +dflag2str(_) -> + "UNKNOWN". + + remove_flag(Flag, Flags) -> case Flags band Flag of 0 -> @@ -82,13 +124,13 @@ remove_flag(Flag, Flags) -> Flags - Flag end. -adjust_flags(ThisFlags, OtherFlags) -> +adjust_flags(ThisFlags, OtherFlags, RejectFlags) -> case (?DFLAG_PUBLISHED band ThisFlags) band OtherFlags of 0 -> {remove_flag(?DFLAG_PUBLISHED, ThisFlags), remove_flag(?DFLAG_PUBLISHED, OtherFlags)}; _ -> - {ThisFlags, OtherFlags} + {ThisFlags, OtherFlags band (bnot RejectFlags)} end. publish_flag(hidden, _) -> @@ -101,36 +143,71 @@ publish_flag(_, OtherNode) -> 0 end. -make_this_flags(RequestType, OtherNode) -> - publish_flag(RequestType, OtherNode) bor - %% The parenthesis below makes the compiler generate better code. - (?DFLAG_EXPORT_PTR_TAG bor - ?DFLAG_EXTENDED_PIDS_PORTS bor - ?DFLAG_EXTENDED_REFERENCES bor - ?DFLAG_DIST_MONITOR bor - ?DFLAG_FUN_TAGS bor - ?DFLAG_DIST_MONITOR_NAME bor - ?DFLAG_HIDDEN_ATOM_CACHE bor - ?DFLAG_NEW_FUN_TAGS bor - ?DFLAG_BIT_BINARIES bor - ?DFLAG_NEW_FLOATS bor - ?DFLAG_UNICODE_IO bor - ?DFLAG_DIST_HDR_ATOM_CACHE bor - ?DFLAG_SMALL_ATOM_TAGS bor - ?DFLAG_UTF8_ATOMS bor - ?DFLAG_MAP_TAG bor - ?DFLAG_BIG_CREATION). - -handshake_other_started(#hs_data{request_type=ReqType}=HSData0) -> +-define(DFLAGS_REMOVABLE, + (?DFLAG_DIST_HDR_ATOM_CACHE + bor ?DFLAG_HIDDEN_ATOM_CACHE + bor ?DFLAG_ATOM_CACHE)). + +-define(DFLAGS_ADDABLE, + (?DFLAGS_ALL + band (bnot (?DFLAG_PUBLISHED + bor ?DFLAG_HIDDEN_ATOM_CACHE + bor ?DFLAG_ATOM_CACHE)))). + +-define(DFLAGS_THIS_DEFAULT, + (?DFLAG_EXPORT_PTR_TAG + bor ?DFLAG_EXTENDED_PIDS_PORTS + bor ?DFLAG_EXTENDED_REFERENCES + bor ?DFLAG_DIST_MONITOR + bor ?DFLAG_FUN_TAGS + bor ?DFLAG_DIST_MONITOR_NAME + bor ?DFLAG_NEW_FUN_TAGS + bor ?DFLAG_BIT_BINARIES + bor ?DFLAG_NEW_FLOATS + bor ?DFLAG_UNICODE_IO + bor ?DFLAG_DIST_HDR_ATOM_CACHE + bor ?DFLAG_SMALL_ATOM_TAGS + bor ?DFLAG_UTF8_ATOMS + bor ?DFLAG_MAP_TAG + bor ?DFLAG_BIG_CREATION + bor ?DFLAG_SEND_SENDER)). + +make_this_flags(RequestType, AddFlags, RemoveFlags, OtherNode) -> + case RemoveFlags band (bnot ?DFLAGS_REMOVABLE) of + 0 -> ok; + Rerror -> exit({"Rejecting non rejectable flags", Rerror}) + end, + case AddFlags band (bnot ?DFLAGS_ADDABLE) of + 0 -> ok; + Aerror -> exit({"Adding non addable flags", Aerror}) + end, + Flgs0 = ?DFLAGS_THIS_DEFAULT, + Flgs1 = Flgs0 bor publish_flag(RequestType, OtherNode), + Flgs2 = Flgs1 bor AddFlags, + Flgs3 = Flgs2 band (bnot (?DFLAG_HIDDEN_ATOM_CACHE + bor ?DFLAG_ATOM_CACHE)), + Flgs3 band (bnot RemoveFlags). + +handshake_other_started(#hs_data{request_type=ReqType, + add_flags=AddFlgs0, + reject_flags=RejFlgs0, + require_flags=ReqFlgs0}=HSData0) -> + AddFlgs = convert_flags(AddFlgs0), + RejFlgs = convert_flags(RejFlgs0), + ReqFlgs = convert_flags(ReqFlgs0), {PreOtherFlags,Node,Version} = recv_name(HSData0), - PreThisFlags = make_this_flags(ReqType, Node), + PreThisFlags = make_this_flags(ReqType, AddFlgs, RejFlgs, Node), {ThisFlags, OtherFlags} = adjust_flags(PreThisFlags, - PreOtherFlags), + PreOtherFlags, + RejFlgs), HSData = HSData0#hs_data{this_flags=ThisFlags, other_flags=OtherFlags, other_version=Version, other_node=Node, - other_started=true}, + other_started=true, + add_flags=AddFlgs, + reject_flags=RejFlgs, + require_flags=ReqFlgs}, check_dflags(HSData), is_allowed(HSData), ?debug({"MD5 connection from ~p (V~p)~n", @@ -165,23 +242,19 @@ is_allowed(#hs_data{other_node = Node, end. %% -%% Check that both nodes can handle the same types of extended -%% node containers. If they can not, abort the connection. +%% Check mandatory flags... %% check_dflags(#hs_data{other_node = Node, other_flags = OtherFlags, - other_started = OtherStarted} = HSData) -> - - Mandatory = [{?DFLAG_EXTENDED_REFERENCES, "EXTENDED_REFERENCES"}, - {?DFLAG_EXTENDED_PIDS_PORTS, "EXTENDED_PIDS_PORTS"}, - {?DFLAG_UTF8_ATOMS, "UTF8_ATOMS"}], - Missing = lists:filtermap(fun({Bit, Str}) -> - case Bit band OtherFlags of - Bit -> false; - 0 -> {true, Str} - end - end, - Mandatory), + other_started = OtherStarted, + require_flags = RequiredFlags} = HSData) -> + Mandatory = ((?DFLAG_EXTENDED_REFERENCES + bor ?DFLAG_EXTENDED_PIDS_PORTS + bor ?DFLAG_UTF8_ATOMS + bor ?DFLAG_NEW_FUN_TAGS) + bor RequiredFlags), + Missing = check_mandatory(0, ?DFLAGS_ALL, Mandatory, + OtherFlags, []), case Missing of [] -> ok; @@ -201,6 +274,22 @@ check_dflags(#hs_data{other_node = Node, ?shutdown2(Node, {check_dflags_failed, Missing}) end. +check_mandatory(_Bit, 0, _Mandatory, _OtherFlags, Missing) -> + Missing; +check_mandatory(Bit, Left, Mandatory, OtherFlags, Missing) -> + DFlag = (1 bsl Bit), + NewLeft = Left band (bnot DFlag), + NewMissing = case {DFlag band Mandatory, + DFlag band OtherFlags} of + {DFlag, 0} -> + %% Mandatory and missing... + [dflag2str(DFlag) | Missing]; + _ -> + %% Not mandatory or present... + Missing + end, + check_mandatory(Bit+1, NewLeft, Mandatory, OtherFlags, NewMissing). + %% No nodedown will be sent if we fail before this process has %% succeeded to mark the node as pending. @@ -314,13 +403,24 @@ flush_down() -> end. handshake_we_started(#hs_data{request_type=ReqType, - other_node=Node}=PreHSData) -> - PreThisFlags = make_this_flags(ReqType, Node), - HSData = PreHSData#hs_data{this_flags=PreThisFlags}, + other_node=Node, + add_flags=AddFlgs0, + reject_flags=RejFlgs0, + require_flags=ReqFlgs0}=PreHSData) -> + AddFlgs = convert_flags(AddFlgs0), + RejFlgs = convert_flags(RejFlgs0), + ReqFlgs = convert_flags(ReqFlgs0), + PreThisFlags = make_this_flags(ReqType, AddFlgs, RejFlgs, Node), + HSData = PreHSData#hs_data{this_flags = PreThisFlags, + add_flags = AddFlgs, + reject_flags = RejFlgs, + require_flags = ReqFlgs}, send_name(HSData), recv_status(HSData), {PreOtherFlags,ChallengeA} = recv_challenge(HSData), - {ThisFlags,OtherFlags} = adjust_flags(PreThisFlags, PreOtherFlags), + {ThisFlags,OtherFlags} = adjust_flags(PreThisFlags, + PreOtherFlags, + RejFlgs), NewHSData = HSData#hs_data{this_flags = ThisFlags, other_flags = OtherFlags, other_started = false}, @@ -336,15 +436,16 @@ handshake_we_started(#hs_data{request_type=ReqType, handshake_we_started(OldHsData) when element(1,OldHsData) =:= hs_data -> handshake_we_started(convert_old_hsdata(OldHsData)). -convert_old_hsdata({hs_data, KP, ON, TN, S, T, TF, A, OV, OF, OS, FS, FR, - FS_PRE, FS_POST, FG, FA, MFT, MFG, RT}) -> - #hs_data{ - kernel_pid = KP, other_node = ON, this_node = TN, socket = S, timer = T, - this_flags = TF, allowed = A, other_version = OV, other_flags = OF, - other_started = OS, f_send = FS, f_recv = FR, f_setopts_pre_nodeup = FS_PRE, - f_setopts_post_nodeup = FS_POST, f_getll = FG, f_address = FA, - mf_tick = MFT, mf_getstat = MFG, request_type = RT}. +convert_old_hsdata(OldHsData) -> + OHSDL = tuple_to_list(OldHsData), + NoMissing = tuple_size(#hs_data{}) - tuple_size(OldHsData), + true = NoMissing > 0, + list_to_tuple(OHSDL ++ lists:duplicate(NoMissing, undefined)). +convert_flags(Flags) when is_integer(Flags) -> + Flags; +convert_flags(_Undefined) -> + 0. %% -------------------------------------------------------------- %% The connection has been established. @@ -359,15 +460,20 @@ connection(#hs_data{other_node = Node, PType = publish_type(HSData#hs_data.other_flags), case FPreNodeup(Socket) of ok -> - do_setnode(HSData), % Succeeds or exits the process. + DHandle = do_setnode(HSData), % Succeeds or exits the process. Address = FAddress(Socket,Node), mark_nodeup(HSData,Address), case FPostNodeup(Socket) of ok -> + case HSData#hs_data.f_handshake_complete of + undefined -> ok; + HsComplete -> HsComplete(Socket, Node, DHandle) + end, con_loop({HSData#hs_data.kernel_pid, Node, Socket, PType, + DHandle, HSData#hs_data.mf_tick, HSData#hs_data.mf_getstat, HSData#hs_data.mf_setopts, @@ -425,18 +531,16 @@ do_setnode(#hs_data{other_node = Node, socket = Socket, [Node, Port, {publish_type(Flags), '(', Flags, ')', Version}]), - case (catch - erlang:setnode(Node, Port, - {Flags, Version, '', ''})) of - {'EXIT', {system_limit, _}} -> + try + erlang:setnode(Node, Port, {Flags, Version, '', ''}) + catch + error:system_limit -> error_msg("** Distribution system limit reached, " "no table space left for node ~w ** ~n", [Node]), ?shutdown(Node); - {'EXIT', Other} -> - exit(Other); - _Else -> - ok + error:Other:Stacktrace -> + exit({Other, Stacktrace}) end; _ -> error_msg("** Distribution connection error, " @@ -468,7 +572,13 @@ mark_nodeup(#hs_data{kernel_pid = Kernel, ?shutdown(Node) end. -con_loop({Kernel, Node, Socket, Type, MFTick, MFGetstat, MFSetOpts, MFGetOpts}=ConData, +getstat(DHandle, _Socket, undefined) -> + erlang:dist_get_stat(DHandle); +getstat(_DHandle, Socket, MFGetstat) -> + MFGetstat(Socket). + +con_loop({Kernel, Node, Socket, Type, DHandle, MFTick, MFGetstat, + MFSetOpts, MFGetOpts}=ConData, Tick) -> receive {tcp_closed, Socket} -> @@ -476,7 +586,7 @@ con_loop({Kernel, Node, Socket, Type, MFTick, MFGetstat, MFSetOpts, MFGetOpts}=C {Kernel, disconnect} -> ?shutdown2(Node, disconnected); {Kernel, aux_tick} -> - case MFGetstat(Socket) of + case getstat(DHandle, Socket, MFGetstat) of {ok, _, _, PendWrite} -> send_tick(Socket, PendWrite, MFTick); _ -> @@ -484,7 +594,7 @@ con_loop({Kernel, Node, Socket, Type, MFTick, MFGetstat, MFSetOpts, MFGetOpts}=C end, con_loop(ConData, Tick); {Kernel, tick} -> - case send_tick(Socket, Tick, Type, + case send_tick(DHandle, Socket, Tick, Type, MFTick, MFGetstat) of {ok, NewTick} -> con_loop(ConData, NewTick); @@ -497,7 +607,7 @@ con_loop({Kernel, Node, Socket, Type, MFTick, MFGetstat, MFSetOpts, MFGetOpts}=C ?shutdown2(Node, send_net_tick_failed) end; {From, get_status} -> - case MFGetstat(Socket) of + case getstat(DHandle, Socket, MFGetstat) of {ok, Read, Write, _} -> From ! {self(), get_status, {ok, Read, Write}}, con_loop(ConData, Tick); @@ -735,14 +845,14 @@ send_status(#hs_data{socket = Socket, other_node = Node, %% we haven't read anything as a hidden node only ticks when it receives %% a TICK !! -send_tick(Socket, Tick, Type, MFTick, MFGetstat) -> +send_tick(DHandle, Socket, Tick, Type, MFTick, MFGetstat) -> #tick{tick = T0, read = Read, write = Write, ticked = Ticked} = Tick, T = T0 + 1, T1 = T rem 4, - case MFGetstat(Socket) of + case getstat(DHandle, Socket, MFGetstat) of {ok, Read, _, _} when Ticked =:= T -> {error, not_responding}; {ok, Read, W, Pend} when Type =:= hidden -> @@ -771,11 +881,10 @@ send_tick(Socket, Tick, Type, MFTick, MFGetstat) -> Error end. -send_tick(Socket, 0, MFTick) -> - MFTick(Socket); -send_tick(_, _Pend, _) -> - %% Dont send tick if pending write. - ok. +send_tick(_, Pend, _) when Pend /= false, Pend /= 0 -> + ok; %% Dont send tick if pending write. +send_tick(Socket, _Pend, MFTick) -> + MFTick(Socket). %% ------------------------------------------------------------ %% Connection setup timeout timer. diff --git a/lib/kernel/src/erl_boot_server.erl b/lib/kernel/src/erl_boot_server.erl index 2578b74428..4ac945ce01 100644 --- a/lib/kernel/src/erl_boot_server.erl +++ b/lib/kernel/src/erl_boot_server.erl @@ -252,9 +252,9 @@ handle_info({udp, U, IP, Port, Data}, S0) -> "~w is not a valid address ** ~n", [IP]), {noreply,S0}; {true,_,_} -> - case catch string:substr(Data, 1, length(?EBOOT_REQUEST)) of + case catch string:slice(Data, 0, length(?EBOOT_REQUEST)) of ?EBOOT_REQUEST -> - Vsn = string:substr(Data, length(?EBOOT_REQUEST)+1, length(Data)), + Vsn = string:slice(Data, length(?EBOOT_REQUEST), length(Data)), error_logger:error_msg("** Illegal boot server connection attempt: " "client version is ~s ** ~n", [Vsn]); _ -> diff --git a/lib/kernel/src/erl_epmd.erl b/lib/kernel/src/erl_epmd.erl index 7bc9e2ede3..f96bc88913 100644 --- a/lib/kernel/src/erl_epmd.erl +++ b/lib/kernel/src/erl_epmd.erl @@ -79,7 +79,13 @@ port_please(Node, EpmdAddr, Timeout) -> port_please1(Node,HostName, Timeout) -> - case inet:gethostbyname(HostName, inet, Timeout) of + Family = case inet_db:res_option(inet6) of + true -> + inet6; + false -> + inet + end, + case inet:gethostbyname(HostName, Family, Timeout) of {ok,{hostent, _Name, _ , _Af, _Size, [EpmdAddr | _]}} -> get_port(Node, EpmdAddr, Timeout); Else -> diff --git a/lib/kernel/src/erl_reply.erl b/lib/kernel/src/erl_reply.erl index e1e046cbb4..e1c4ffe839 100644 --- a/lib/kernel/src/erl_reply.erl +++ b/lib/kernel/src/erl_reply.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 1997-2016. All Rights Reserved. +%% Copyright Ericsson AB 1997-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -42,7 +42,7 @@ reply(_) -> %% convert ip number to tuple ip_string_to_tuple(Ip) -> - [Ip1,Ip2,Ip3,Ip4] = string:tokens(Ip,"."), + [Ip1,Ip2,Ip3,Ip4] = string:lexemes(Ip,"."), {list_to_integer(Ip1), list_to_integer(Ip2), list_to_integer(Ip3), diff --git a/lib/kernel/src/error_handler.erl b/lib/kernel/src/error_handler.erl index 59ca8e690d..a9582c6225 100644 --- a/lib/kernel/src/error_handler.erl +++ b/lib/kernel/src/error_handler.erl @@ -106,8 +106,8 @@ crash(M, F, A) -> crash(Tuple) -> try erlang:error(undef) catch - error:undef -> - Stk = [Tuple|tl(erlang:get_stacktrace())], + error:undef:Stacktrace -> + Stk = [Tuple|tl(Stacktrace)], erlang:raise(error, undef, Stk) end. diff --git a/lib/kernel/src/erts_debug.erl b/lib/kernel/src/erts_debug.erl index 9662f8fa90..3456c8511e 100644 --- a/lib/kernel/src/erts_debug.erl +++ b/lib/kernel/src/erts_debug.erl @@ -21,7 +21,7 @@ %% Low-level debugging support. EXPERIMENTAL! --export([size/1,df/1,df/2,df/3,df/4,ic/1]). +-export([size/1,df/1,df/2,df/3,dis_to_file/2,ic/1]). %% This module contains the following *experimental* BIFs: %% disassemble/1 @@ -347,55 +347,52 @@ is_term_seen(_, []) -> false. -spec df(module()) -> df_ret(). df(Mod) when is_atom(Mod) -> - df(lists:concat([Mod, ".dis"]), Mod). - --spec df(module(), atom()) -> df_ret(); - (file:io_device() | file:filename(), module()) -> df_ret(). - -df(Mod, Func) when is_atom(Mod), is_atom(Func) -> - df(lists:concat([Mod, "_", Func, ".dis"]), Mod, Func); -df(Name, Mod) when is_atom(Mod) -> try Mod:module_info(functions) of Fs0 when is_list(Fs0) -> + Name = lists:concat([Mod, ".dis"]), Fs = [{Mod,Func,Arity} || {Func,Arity} <- Fs0], dff(Name, Fs) catch _:_ -> {undef,Mod} end. +-spec df(module(), atom()) -> df_ret(). --spec df(module(), atom(), arity()) -> df_ret(); - (file:io_device() | file:filename(), module(), atom()) -> df_ret(). - -df(Mod, Func, Arity) when is_atom(Mod), is_atom(Func), is_integer(Arity) -> - df(lists:concat([Mod, "_", Func, "_", Arity, ".dis"]), Mod, Func, Arity); -df(Name, Mod, Func) when is_atom(Mod), is_atom(Func) -> +df(Mod, Func) when is_atom(Mod), is_atom(Func) -> try Mod:module_info(functions) of Fs0 when is_list(Fs0) -> + Name = lists:concat([Mod, "_", Func, ".dis"]), Fs = [{Mod,Func1,Arity} || {Func1,Arity} <- Fs0, Func1 =:= Func], dff(Name, Fs) catch _:_ -> {undef,Mod} end. --spec df(file:io_device() | file:filename(), module(), atom(), arity()) -> df_ret(). -df(Name, Mod, Func, Arity) when is_atom(Mod), is_atom(Func), is_integer(Arity) -> +-spec df(module(), atom(), arity()) -> df_ret(). + +df(Mod, Func, Arity) when is_atom(Mod), is_atom(Func) -> try Mod:module_info(functions) of Fs0 when is_list(Fs0) -> + Name = lists:concat([Mod, "_", Func, "_", Arity, ".dis"]), Fs = [{Mod,Func1,Arity1} || {Func1,Arity1} <- Fs0, Func1 =:= Func, Arity1 =:= Arity], dff(Name, Fs) catch _:_ -> {undef,Mod} end. -dff(File, Fs) when is_pid(File), is_list(Fs) -> - lists:foreach(fun(Mfa) -> - disassemble_function(File, Mfa), - io:nl(File) - end, Fs); -dff(Name, Fs) when is_list(Name) -> - case file:open(Name, [write]) of +-spec dis_to_file(module(), file:filename()) -> df_ret(). + +dis_to_file(Mod, Name) when is_atom(Mod) -> + try Mod:module_info(functions) of + Fs0 when is_list(Fs0) -> + Fs = [{Mod,Func,Arity} || {Func,Arity} <- Fs0], + dff(Name, Fs) + catch _:_ -> {undef,Mod} + end. + +dff(Name, Fs) -> + case file:open(Name, [write,raw,delayed_write]) of {ok,F} -> try - dff(F, Fs) + dff_1(F, Fs) after _ = file:close(F) end; @@ -403,12 +400,18 @@ dff(Name, Fs) when is_list(Name) -> {error,{badopen,Reason}} end. +dff_1(File, Fs) -> + lists:foreach(fun(Mfa) -> + disassemble_function(File, Mfa), + file:write(File, "\n") + end, Fs). + disassemble_function(File, {_,_,_}=MFA) -> cont_dis(File, erts_debug:disassemble(MFA), MFA). cont_dis(_, false, _) -> ok; cont_dis(File, {Addr,Str,MFA}, MFA) -> - io:put_chars(File, binary_to_list(Str)), + ok = file:write(File, Str), cont_dis(File, erts_debug:disassemble(Addr), MFA); cont_dis(_, {_,_,_}, _) -> ok. diff --git a/lib/kernel/src/file.erl b/lib/kernel/src/file.erl index 933f2d5f65..c2df1ee288 100644 --- a/lib/kernel/src/file.erl +++ b/lib/kernel/src/file.erl @@ -72,7 +72,7 @@ io_device/0, name/0, name_all/0, posix/0]). %%% Includes and defines --include("file.hrl"). +-include("file_int.hrl"). -define(FILE_IO_SERVER_TABLE, file_io_servers). @@ -454,41 +454,23 @@ raw_write_file_info(Name, #file_info{} = Info) -> Reason :: posix() | badarg | system_limit. open(Item, ModeList) when is_list(ModeList) -> - case lists:member(raw, ModeList) of - %% Raw file, use ?PRIM_FILE to handle this file - true -> + case {lists:member(raw, ModeList), lists:member(ram, ModeList)} of + {false, false} -> + %% File server file Args = [file_name(Item) | ModeList], case check_args(Args) of ok -> [FileName | _] = Args, - %% We rely on the returned Handle (in {ok, Handle}) - %% being a pid() or a #file_descriptor{} - ?PRIM_FILE:open(FileName, ModeList); + call(open, [FileName, ModeList]); Error -> Error - end; - false -> - case lists:member(ram, ModeList) of - %% RAM file, use ?RAM_FILE to handle this file - true -> - case check_args(ModeList) of - ok -> - ?RAM_FILE:open(Item, ModeList); - Error -> - Error - end; - %% File server file - false -> - Args = [file_name(Item) | ModeList], - case check_args(Args) of - ok -> - [FileName | _] = Args, - call(open, [FileName, ModeList]); - Error -> - Error - end - end + end; + {true, _Either} -> + raw_file_io:open(file_name(Item), ModeList); + {false, true} -> + ram_file:open(Item, ModeList) end; + %% Old obsolete mode specification in atom or 2-tuple format open(Item, Mode) -> open(Item, mode_list(Mode)). @@ -1254,15 +1236,18 @@ sendfile(File, _Sock, _Offet, _Bytes, _Opts) when is_pid(File) -> sendfile(File, Sock, Offset, Bytes, []) -> sendfile(File, Sock, Offset, Bytes, ?MAX_CHUNK_SIZE, [], [], []); sendfile(File, Sock, Offset, Bytes, Opts) -> - ChunkSize0 = proplists:get_value(chunk_size, Opts, ?MAX_CHUNK_SIZE), - ChunkSize = if ChunkSize0 > ?MAX_CHUNK_SIZE -> - ?MAX_CHUNK_SIZE; - true -> ChunkSize0 - end, - %% Support for headers, trailers and options has been removed because the - %% Darwin and BSD API for using it does not play nice with - %% non-blocking sockets. See unix_efile.c for more info. - sendfile(File, Sock, Offset, Bytes, ChunkSize, [], [], Opts). + try proplists:get_value(chunk_size, Opts, ?MAX_CHUNK_SIZE) of + ChunkSize0 when is_integer(ChunkSize0) -> + ChunkSize = erlang:min(ChunkSize0, ?MAX_CHUNK_SIZE), + %% Support for headers, trailers and options has been removed + %% because the Darwin and BSD API for using it does not play nice + %% with non-blocking sockets. See unix_efile.c for more info. + sendfile(File, Sock, Offset, Bytes, ChunkSize, [], [], Opts); + _Other -> + {error, badarg} + catch + error:_ -> {error, badarg} + end. %% sendfile/2 -spec sendfile(Filename, Socket) -> @@ -1397,8 +1382,8 @@ eval_stream2({ok,Form,EndLine}, Fd, H, Last, E, Bs0) -> try erl_eval:exprs(Form, Bs0) of {value,V,Bs} -> eval_stream(Fd, H, EndLine, {V}, E, Bs) - catch Class:Reason -> - Error = {EndLine,?MODULE,{Class,Reason,erlang:get_stacktrace()}}, + catch Class:Reason:StackTrace -> + Error = {EndLine,?MODULE,{Class,Reason,StackTrace}}, eval_stream(Fd, H, EndLine, Last, [Error|E], Bs0) end; eval_stream2({error,What,EndLine}, Fd, H, Last, E, Bs) -> diff --git a/lib/kernel/src/file_int.hrl b/lib/kernel/src/file_int.hrl new file mode 100644 index 0000000000..bafc330c04 --- /dev/null +++ b/lib/kernel/src/file_int.hrl @@ -0,0 +1,33 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2017. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +%% + +%% +%% Internal definitions for the 'file' module and friends. +%% + +-ifndef(FILE_INTERNAL_HRL_). +-define(FILE_INTERNAL_HRL_, 1). + +-include("file.hrl"). + +-define(CALL_FD(Fd, Method, Args), + apply(Fd#file_descriptor.module, Method, [Fd | Args])). + +-endif. diff --git a/lib/kernel/src/file_io_server.erl b/lib/kernel/src/file_io_server.erl index deb7b315b1..34d5497a4a 100644 --- a/lib/kernel/src/file_io_server.erl +++ b/lib/kernel/src/file_io_server.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2000-2015. All Rights Reserved. +%% Copyright Ericsson AB 2000-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -28,7 +28,8 @@ -record(state, {handle,owner,mref,buf,read_mode,unic}). --define(PRIM_FILE, prim_file). +-include("file_int.hrl"). + -define(READ_SIZE_LIST, 128). -define(READ_SIZE_BINARY, (8*1024)). @@ -67,8 +68,9 @@ do_start(Spawn, Owner, FileName, ModeList) -> erlang:dt_restore_tag(Utag), %% process_flag(trap_exit, true), case parse_options(ModeList) of - {ReadMode, UnicodeMode, Opts} -> - case ?PRIM_FILE:open(FileName, Opts) of + {ReadMode, UnicodeMode, Opts0} -> + Opts = maybe_add_read_ahead(ReadMode, Opts0), + case raw_file_io:open(FileName, [raw | Opts]) of {error, Reason} = Error -> Self ! {Ref, Error}, exit(Reason); @@ -157,6 +159,24 @@ valid_enc({utf32,little}) -> valid_enc(_Other) -> {error,badarg}. +%% Add a small read_ahead buffer if the file is opened for reading +%% only in list mode and no read_ahead is already given. +maybe_add_read_ahead(binary, Opts) -> + Opts; +maybe_add_read_ahead(list, Opts) -> + P = fun(read_ahead) -> true; + ({read_ahead,_}) -> true; + (append) -> true; + (exclusive) -> true; + (write) -> true; + (_) -> false + end, + case lists:any(P, Opts) of + false -> + [{read_ahead, 4096}|Opts]; + true -> + Opts + end. server_loop(#state{mref = Mref} = State) -> receive @@ -205,7 +225,7 @@ io_reply(From, ReplyAs, Reply) -> file_request({advise,Offset,Length,Advise}, #state{handle=Handle}=State) -> - case ?PRIM_FILE:advise(Handle, Offset, Length, Advise) of + case ?CALL_FD(Handle, advise, [Offset, Length, Advise]) of {error,Reason}=Reply -> {stop,Reason,Reply,State}; Reply -> @@ -213,7 +233,7 @@ file_request({advise,Offset,Length,Advise}, end; file_request({allocate, Offset, Length}, #state{handle = Handle} = State) -> - Reply = ?PRIM_FILE:allocate(Handle, Offset, Length), + Reply = ?CALL_FD(Handle, allocate, [Offset, Length]), {reply, Reply, State}; file_request({pread,At,Sz}, State) when At =:= cur; @@ -256,7 +276,7 @@ file_request({pwrite,At,Data}, end; file_request(datasync, #state{handle=Handle}=State) -> - case ?PRIM_FILE:datasync(Handle) of + case ?CALL_FD(Handle, datasync, []) of {error,Reason}=Reply -> {stop,Reason,Reply,State}; Reply -> @@ -264,7 +284,7 @@ file_request(datasync, end; file_request(sync, #state{handle=Handle}=State) -> - case ?PRIM_FILE:sync(Handle) of + case ?CALL_FD(Handle, sync, []) of {error,Reason}=Reply -> {stop,Reason,Reply,State}; Reply -> @@ -272,7 +292,7 @@ file_request(sync, end; file_request(close, #state{handle=Handle}=State) -> - case ?PRIM_FILE:close(Handle) of + case ?CALL_FD(Handle, close, []) of {error,Reason}=Reply -> {stop,Reason,Reply,State#state{buf= <<>>}}; Reply -> @@ -288,7 +308,7 @@ file_request({position,At}, end; file_request(truncate, #state{handle=Handle}=State) -> - case ?PRIM_FILE:truncate(Handle) of + case ?CALL_FD(Handle, truncate, []) of {error,Reason}=Reply -> {stop,Reason,Reply,State#state{buf= <<>>}}; Reply -> @@ -398,7 +418,7 @@ io_request_loop([Request|Tail], %% put_chars(Chars, latin1, #state{handle=Handle, unic=latin1}=State) -> NewState = State#state{buf = <<>>}, - case ?PRIM_FILE:write(Handle, Chars) of + case ?CALL_FD(Handle, write, [Chars]) of {error,Reason}=Reply -> {stop,Reason,Reply,NewState}; Reply -> @@ -408,7 +428,7 @@ put_chars(Chars, InEncoding, #state{handle=Handle, unic=OutEncoding}=State) -> NewState = State#state{buf = <<>>}, case unicode:characters_to_binary(Chars,InEncoding,OutEncoding) of Bin when is_binary(Bin) -> - case ?PRIM_FILE:write(Handle, Bin) of + case ?CALL_FD(Handle, write, [Bin]) of {error,Reason}=Reply -> {stop,Reason,Reply,NewState}; Reply -> @@ -422,7 +442,7 @@ put_chars(Chars, InEncoding, #state{handle=Handle, unic=OutEncoding}=State) -> get_line(S, {<<>>, Cont}, OutEnc, #state{handle=Handle, read_mode=Mode, unic=InEnc}=State) -> - case ?PRIM_FILE:read(Handle, read_size(Mode)) of + case ?CALL_FD(Handle, read, [read_size(Mode)]) of {ok,Bin} -> get_line(S, convert_enc([Cont, Bin], InEnc, OutEnc), OutEnc, State); eof -> @@ -472,7 +492,7 @@ get_chars(N, OutEnc,#state{handle=Handle,buf=Buf,read_mode=ReadMode,unic=latin1} BufSize = byte_size(Buf), NeedSize = N-BufSize, Size = erlang:max(NeedSize, ?READ_SIZE_BINARY), - case ?PRIM_FILE:read(Handle, Size) of + case ?CALL_FD(Handle, read, [Size]) of {ok, B} -> if BufSize+byte_size(B) < N -> std_reply(cat(Buf, B, ReadMode,latin1,OutEnc), State); @@ -504,7 +524,7 @@ get_chars(N, OutEnc,#state{handle=Handle,buf=Buf,read_mode=ReadMode,unic=InEncod %% Need more, Try to read 4*needed in bytes... NeedSize = (N - BufCount) * 4, Size = erlang:max(NeedSize, ?READ_SIZE_BINARY), - case ?PRIM_FILE:read(Handle, Size) of + case ?CALL_FD(Handle, read, [Size]) of {ok, B} -> NewBuf = list_to_binary([Buf,B]), {NewCount,NewSplit} = count_and_find(NewBuf,N,InEncoding), @@ -544,7 +564,7 @@ get_chars(Mod, Func, XtraArg, OutEnc, #state{buf=Buf}=State) -> get_chars_empty(Mod, Func, XtraArg, S, latin1, #state{handle=Handle,read_mode=ReadMode, unic=latin1}=State) -> - case ?PRIM_FILE:read(Handle, read_size(ReadMode)) of + case ?CALL_FD(Handle, read, [read_size(ReadMode)]) of {ok,Bin} -> get_chars_apply(Mod, Func, XtraArg, S, latin1, State, Bin); eof -> @@ -554,7 +574,7 @@ get_chars_empty(Mod, Func, XtraArg, S, latin1, end; get_chars_empty(Mod, Func, XtraArg, S, OutEnc, #state{handle=Handle,read_mode=ReadMode}=State) -> - case ?PRIM_FILE:read(Handle, read_size(ReadMode)) of + case ?CALL_FD(Handle, read, [read_size(ReadMode)]) of {ok,Bin} -> get_chars_apply(Mod, Func, XtraArg, S, OutEnc, State, Bin); eof -> @@ -564,7 +584,7 @@ get_chars_empty(Mod, Func, XtraArg, S, OutEnc, end. get_chars_notempty(Mod, Func, XtraArg, S, OutEnc, #state{handle=Handle,read_mode=ReadMode,buf = B}=State) -> - case ?PRIM_FILE:read(Handle, read_size(ReadMode)) of + case ?CALL_FD(Handle, read, [read_size(ReadMode)]) of {ok,Bin} -> get_chars_apply(Mod, Func, XtraArg, S, OutEnc, State, list_to_binary([B,Bin])); eof -> @@ -918,13 +938,10 @@ cbv({utf32,little},_) -> %% Compensates ?PRIM_FILE:position/2 for the number of bytes %% we have buffered position(Handle, At, Buf) -> - ?PRIM_FILE:position( - Handle, - case At of - cur -> - {cur, -byte_size(Buf)}; - {cur, Offs} -> - {cur, Offs-byte_size(Buf)}; - _ -> - At - end). + SeekTo = + case At of + {cur, Offs} -> {cur, Offs-byte_size(Buf)}; + cur -> {cur, -byte_size(Buf)}; + _ -> At + end, + ?CALL_FD(Handle, position, [SeekTo]). diff --git a/lib/kernel/src/file_server.erl b/lib/kernel/src/file_server.erl index 6e8f64d932..ecc1ffbdd6 100644 --- a/lib/kernel/src/file_server.erl +++ b/lib/kernel/src/file_server.erl @@ -63,7 +63,7 @@ stop() -> %%% Callback functions from gen_server %%%---------------------------------------------------------------------- --type state() :: port(). % Internal type +-type state() :: term(). % Internal type %%---------------------------------------------------------------------- %% Func: init/1 @@ -77,14 +77,8 @@ stop() -> init([]) -> process_flag(trap_exit, true), - case ?PRIM_FILE:start() of - {ok, Handle} -> - ?FILE_IO_SERVER_TABLE = - ets:new(?FILE_IO_SERVER_TABLE, [named_table]), - {ok, Handle}; - {error, Reason} -> - {stop, Reason} - end. + ?FILE_IO_SERVER_TABLE = ets:new(?FILE_IO_SERVER_TABLE, [named_table]), + {ok, undefined}. %%---------------------------------------------------------------------- %% Func: handle_call/3 @@ -101,7 +95,7 @@ init([]) -> {'reply', 'eof' | 'ok' | {'error', term()} | {'ok', term()}, state()} | {'stop', 'normal', 'stopped', state()}. -handle_call({open, Name, ModeList}, {Pid, _Tag} = _From, Handle) +handle_call({open, Name, ModeList}, {Pid, _Tag} = _From, State) when is_list(ModeList) -> Child = ?FILE_IO_SERVER:start_link(Pid, Name, ModeList), case Child of @@ -110,78 +104,78 @@ handle_call({open, Name, ModeList}, {Pid, _Tag} = _From, Handle) _ -> ok end, - {reply, Child, Handle}; + {reply, Child, State}; -handle_call({open, _Name, _Mode}, _From, Handle) -> - {reply, {error, einval}, Handle}; +handle_call({open, _Name, _Mode}, _From, State) -> + {reply, {error, einval}, State}; -handle_call({read_file, Name}, _From, Handle) -> - {reply, ?PRIM_FILE:read_file(Name), Handle}; +handle_call({read_file, Name}, _From, State) -> + {reply, ?PRIM_FILE:read_file(Name), State}; -handle_call({write_file, Name, Bin}, _From, Handle) -> - {reply, ?PRIM_FILE:write_file(Name, Bin), Handle}; +handle_call({write_file, Name, Bin}, _From, State) -> + {reply, ?PRIM_FILE:write_file(Name, Bin), State}; -handle_call({set_cwd, Name}, _From, Handle) -> - {reply, ?PRIM_FILE:set_cwd(Handle, Name), Handle}; +handle_call({set_cwd, Name}, _From, State) -> + {reply, ?PRIM_FILE:set_cwd(Name), State}; -handle_call({delete, Name}, _From, Handle) -> - {reply, ?PRIM_FILE:delete(Handle, Name), Handle}; +handle_call({delete, Name}, _From, State) -> + {reply, ?PRIM_FILE:delete(Name), State}; -handle_call({rename, Fr, To}, _From, Handle) -> - {reply, ?PRIM_FILE:rename(Handle, Fr, To), Handle}; +handle_call({rename, Fr, To}, _From, State) -> + {reply, ?PRIM_FILE:rename(Fr, To), State}; -handle_call({make_dir, Name}, _From, Handle) -> - {reply, ?PRIM_FILE:make_dir(Handle, Name), Handle}; +handle_call({make_dir, Name}, _From, State) -> + {reply, ?PRIM_FILE:make_dir(Name), State}; -handle_call({del_dir, Name}, _From, Handle) -> - {reply, ?PRIM_FILE:del_dir(Handle, Name), Handle}; +handle_call({del_dir, Name}, _From, State) -> + {reply, ?PRIM_FILE:del_dir(Name), State}; -handle_call({list_dir, Name}, _From, Handle) -> - {reply, ?PRIM_FILE:list_dir(Handle, Name), Handle}; -handle_call({list_dir_all, Name}, _From, Handle) -> - {reply, ?PRIM_FILE:list_dir_all(Handle, Name), Handle}; +handle_call({list_dir, Name}, _From, State) -> + {reply, ?PRIM_FILE:list_dir(Name), State}; +handle_call({list_dir_all, Name}, _From, State) -> + {reply, ?PRIM_FILE:list_dir_all(Name), State}; -handle_call(get_cwd, _From, Handle) -> - {reply, ?PRIM_FILE:get_cwd(Handle), Handle}; -handle_call({get_cwd}, _From, Handle) -> - {reply, ?PRIM_FILE:get_cwd(Handle), Handle}; -handle_call({get_cwd, Name}, _From, Handle) -> - {reply, ?PRIM_FILE:get_cwd(Handle, Name), Handle}; +handle_call(get_cwd, _From, State) -> + {reply, ?PRIM_FILE:get_cwd(), State}; +handle_call({get_cwd}, _From, State) -> + {reply, ?PRIM_FILE:get_cwd(), State}; +handle_call({get_cwd, Name}, _From, State) -> + {reply, ?PRIM_FILE:get_cwd(Name), State}; -handle_call({read_file_info, Name}, _From, Handle) -> - {reply, ?PRIM_FILE:read_file_info(Handle, Name), Handle}; +handle_call({read_file_info, Name}, _From, State) -> + {reply, ?PRIM_FILE:read_file_info(Name), State}; -handle_call({read_file_info, Name, Opts}, _From, Handle) -> - {reply, ?PRIM_FILE:read_file_info(Handle, Name, Opts), Handle}; +handle_call({read_file_info, Name, Opts}, _From, State) -> + {reply, ?PRIM_FILE:read_file_info(Name, Opts), State}; -handle_call({altname, Name}, _From, Handle) -> - {reply, ?PRIM_FILE:altname(Handle, Name), Handle}; +handle_call({altname, Name}, _From, State) -> + {reply, ?PRIM_FILE:altname(Name), State}; -handle_call({write_file_info, Name, Info}, _From, Handle) -> - {reply, ?PRIM_FILE:write_file_info(Handle, Name, Info), Handle}; +handle_call({write_file_info, Name, Info}, _From, State) -> + {reply, ?PRIM_FILE:write_file_info(Name, Info), State}; -handle_call({write_file_info, Name, Info, Opts}, _From, Handle) -> - {reply, ?PRIM_FILE:write_file_info(Handle, Name, Info, Opts), Handle}; +handle_call({write_file_info, Name, Info, Opts}, _From, State) -> + {reply, ?PRIM_FILE:write_file_info(Name, Info, Opts), State}; -handle_call({read_link_info, Name}, _From, Handle) -> - {reply, ?PRIM_FILE:read_link_info(Handle, Name), Handle}; +handle_call({read_link_info, Name}, _From, State) -> + {reply, ?PRIM_FILE:read_link_info(Name), State}; -handle_call({read_link_info, Name, Opts}, _From, Handle) -> - {reply, ?PRIM_FILE:read_link_info(Handle, Name, Opts), Handle}; +handle_call({read_link_info, Name, Opts}, _From, State) -> + {reply, ?PRIM_FILE:read_link_info(Name, Opts), State}; -handle_call({read_link, Name}, _From, Handle) -> - {reply, ?PRIM_FILE:read_link(Handle, Name), Handle}; -handle_call({read_link_all, Name}, _From, Handle) -> - {reply, ?PRIM_FILE:read_link_all(Handle, Name), Handle}; +handle_call({read_link, Name}, _From, State) -> + {reply, ?PRIM_FILE:read_link(Name), State}; +handle_call({read_link_all, Name}, _From, State) -> + {reply, ?PRIM_FILE:read_link_all(Name), State}; -handle_call({make_link, Old, New}, _From, Handle) -> - {reply, ?PRIM_FILE:make_link(Handle, Old, New), Handle}; +handle_call({make_link, Old, New}, _From, State) -> + {reply, ?PRIM_FILE:make_link(Old, New), State}; -handle_call({make_symlink, Old, New}, _From, Handle) -> - {reply, ?PRIM_FILE:make_symlink(Handle, Old, New), Handle}; +handle_call({make_symlink, Old, New}, _From, State) -> + {reply, ?PRIM_FILE:make_symlink(Old, New), State}; handle_call({copy, SourceName, SourceOpts, DestName, DestOpts, Length}, - _From, Handle) -> + _From, State) -> Reply = case ?PRIM_FILE:open(SourceName, [read, binary | SourceOpts]) of {ok, Source} -> @@ -201,14 +195,14 @@ handle_call({copy, SourceName, SourceOpts, DestName, DestOpts, Length}, {error, _} = Error -> Error end, - {reply, Reply, Handle}; + {reply, Reply, State}; -handle_call(stop, _From, Handle) -> - {stop, normal, stopped, Handle}; +handle_call(stop, _From, State) -> + {stop, normal, stopped, State}; -handle_call(Request, From, Handle) -> +handle_call(Request, From, State) -> error_logger:error_msg("handle_call(~tp, ~tp, _)", [Request, From]), - {noreply, Handle}. + {noreply, State}. %%---------------------------------------------------------------------- %% Func: handle_cast/2 @@ -233,14 +227,9 @@ handle_cast(Msg, State) -> -spec handle_info(term(), state()) -> {'noreply', state()} | {'stop', 'normal', state()}. -handle_info({'EXIT', Pid, _Reason}, Handle) when is_pid(Pid) -> +handle_info({'EXIT', Pid, _Reason}, State) when is_pid(Pid) -> ets:delete(?FILE_IO_SERVER_TABLE, Pid), - {noreply, Handle}; - -handle_info({'EXIT', Handle, _Reason}, Handle) -> - error_logger:error_msg("Port controlling ~w terminated in ~w", - [?FILE_SERVER, ?MODULE]), - {stop, normal, Handle}; + {noreply, State}; handle_info(Info, State) -> error_logger:error_msg("handle_Info(~tp, _)", [Info]), @@ -254,8 +243,8 @@ handle_info(Info, State) -> -spec terminate(term(), state()) -> 'ok'. -terminate(_Reason, Handle) -> - ?PRIM_FILE:stop(Handle). +terminate(_Reason, _State) -> + ok. %%---------------------------------------------------------------------- %% Func: code_change/3 diff --git a/lib/kernel/src/group.erl b/lib/kernel/src/group.erl index bf785959ff..e1198d2587 100644 --- a/lib/kernel/src/group.erl +++ b/lib/kernel/src/group.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 1996-2017. All Rights Reserved. +%% Copyright Ericsson AB 1996-2016. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -261,11 +261,11 @@ io_request({put_chars,latin1,M,F,As}, Drv, From, Buf) -> end; io_request({get_chars,Encoding,Prompt,N}, Drv, _From, Buf) -> - get_chars(Prompt, io_lib, collect_chars, N, Drv, Buf, Encoding); + get_chars_n(Prompt, io_lib, collect_chars, N, Drv, Buf, Encoding); io_request({get_line,Encoding,Prompt}, Drv, _From, Buf) -> - get_chars(Prompt, io_lib, collect_line, [], Drv, Buf, Encoding); + get_chars_line(Prompt, io_lib, collect_line, [], Drv, Buf, Encoding); io_request({get_until,Encoding, Prompt,M,F,As}, Drv, _From, Buf) -> - get_chars(Prompt, io_lib, get_until, {M,F,As}, Drv, Buf, Encoding); + get_chars_line(Prompt, io_lib, get_until, {M,F,As}, Drv, Buf, Encoding); io_request({get_password,_Encoding},Drv,_From,Buf) -> get_password_chars(Drv, Buf); io_request({setopts,Opts}, Drv, _From, Buf) when is_list(Opts) -> @@ -434,7 +434,7 @@ getopts(Drv,Buf) -> {ok,[Exp,Echo,Bin,Uni],Buf}. -%% get_chars(Prompt, Module, Function, XtraArgument, Drv, Buffer) +%% get_chars_*(Prompt, Module, Function, XtraArgument, Drv, Buffer) %% Gets characters from the input Drv until as the applied function %% returns {stop,Result,Rest}. Does not block output until input has been %% received. @@ -452,12 +452,21 @@ get_password_chars(Drv,Buf) -> {exit, terminated} end. -get_chars(Prompt, M, F, Xa, Drv, Buf, Encoding) -> +get_chars_n(Prompt, M, F, Xa, Drv, Buf, Encoding) -> + Pbs = prompt_bytes(Prompt, Encoding), + case get(echo) of + true -> + get_chars_loop(Pbs, M, F, Xa, Drv, Buf, start, Encoding); + false -> + get_chars_n_loop(Pbs, M, F, Xa, Drv, Buf, start, Encoding) + end. + +get_chars_line(Prompt, M, F, Xa, Drv, Buf, Encoding) -> Pbs = prompt_bytes(Prompt, Encoding), get_chars_loop(Pbs, M, F, Xa, Drv, Buf, start, Encoding). get_chars_loop(Pbs, M, F, Xa, Drv, Buf0, State, Encoding) -> - Result = case get(echo) of + Result = case get(echo) of true -> get_line(Buf0, Pbs, Drv, Encoding); false -> @@ -466,8 +475,8 @@ get_chars_loop(Pbs, M, F, Xa, Drv, Buf0, State, Encoding) -> get_line_echo_off(Buf0, Pbs, Drv) end, case Result of - {done,Line,Buf1} -> - get_chars_apply(Pbs, M, F, Xa, Drv, Buf1, State, Line, Encoding); + {done,Line,Buf} -> + get_chars_apply(Pbs, M, F, Xa, Drv, Buf, State, Line, Encoding); interrupted -> {error,{error,interrupted},[]}; terminated -> @@ -476,12 +485,29 @@ get_chars_loop(Pbs, M, F, Xa, Drv, Buf0, State, Encoding) -> get_chars_apply(Pbs, M, F, Xa, Drv, Buf, State0, Line, Encoding) -> case catch M:F(State0, cast(Line,get(read_mode), Encoding), Encoding, Xa) of - {stop,Result,Rest} -> - {ok,Result,append(Rest, Buf, Encoding)}; - {'EXIT',_} -> - {error,{error,err_func(M, F, Xa)},[]}; - State1 -> - get_chars_loop(Pbs, M, F, Xa, Drv, Buf, State1, Encoding) + {stop,Result,Rest} -> + {ok,Result,append(Rest, Buf, Encoding)}; + {'EXIT',_} -> + {error,{error,err_func(M, F, Xa)},[]}; + State1 -> + get_chars_loop(Pbs, M, F, Xa, Drv, Buf, State1, Encoding) + end. + +get_chars_n_loop(Pbs, M, F, Xa, Drv, Buf0, State, Encoding) -> + try M:F(State, cast(Buf0, get(read_mode), Encoding), Encoding, Xa) of + {stop,Result,Rest} -> + {ok, Result, Rest}; + State1 -> + case get_chars_echo_off(Pbs, Drv) of + interrupted -> + {error,{error,interrupted},[]}; + terminated -> + {exit,terminated}; + Buf -> + get_chars_n_loop(Pbs, M, F, Xa, Drv, Buf, State1, Encoding) + end + catch _:_ -> + {error,{error,err_func(M, F, Xa)},[]} end. %% Convert error code to make it look as before @@ -684,6 +710,29 @@ get_line_echo_off1({Chars,[]}, Drv) -> get_line_echo_off1({Chars,Rest}, _Drv) -> {done,lists:reverse(Chars),case Rest of done -> []; _ -> Rest end}. +get_chars_echo_off(Pbs, Drv) -> + send_drv_reqs(Drv, [{put_chars, unicode,Pbs}]), + get_chars_echo_off1(Drv). + +get_chars_echo_off1(Drv) -> + receive + {Drv, {data, Cs}} -> + Cs; + {Drv, eof} -> + eof; + {io_request,From,ReplyAs,Req} when is_pid(From) -> + io_request(Req, From, ReplyAs, Drv, []), + get_chars_echo_off1(Drv); + {reply,{{From,ReplyAs},Reply}} when From =/= undefined -> + %% We take care of replies from puts here as well + io_reply(From, ReplyAs, Reply), + get_chars_echo_off1(Drv); + {'EXIT',Drv,interrupt} -> + interrupted; + {'EXIT',Drv,_} -> + terminated + end. + %% We support line editing for the ICANON mode except the following %% line editing characters, which already has another meaning in %% echo-on mode (See Advanced Programming in the Unix Environment, 2nd ed, @@ -793,9 +842,9 @@ search_up_stack(Stack, Substr) -> case up_stack(Stack) of {none,NewStack} -> {none,NewStack}; {L, NewStack} -> - case string:str(L, Substr) of - 0 -> search_up_stack(NewStack, Substr); - _ -> {string:strip(L,right,$\n), NewStack} + case string:find(L, Substr) of + nomatch -> search_up_stack(NewStack, Substr); + _ -> {string:trim(L, trailing, "$\n"), NewStack} end end. @@ -803,9 +852,9 @@ search_down_stack(Stack, Substr) -> case down_stack(Stack) of {none,NewStack} -> {none,NewStack}; {L, NewStack} -> - case string:str(L, Substr) of - 0 -> search_down_stack(NewStack, Substr); - _ -> {string:strip(L,right,$\n), NewStack} + case string:find(L, Substr) of + nomatch -> search_down_stack(NewStack, Substr); + _ -> {string:trim(L, trailing, "$\n"), NewStack} end end. diff --git a/lib/kernel/src/hipe_unified_loader.erl b/lib/kernel/src/hipe_unified_loader.erl index f8199fcf71..fd06f0f7d8 100644 --- a/lib/kernel/src/hipe_unified_loader.erl +++ b/lib/kernel/src/hipe_unified_loader.erl @@ -275,6 +275,7 @@ needs_trampolines(Architecture) -> arm -> true; powerpc -> true; ppc64 -> true; + amd64 -> true; _ -> false end. diff --git a/lib/kernel/src/inet.erl b/lib/kernel/src/inet.erl index dc20c21c77..fe91b0d33e 100644 --- a/lib/kernel/src/inet.erl +++ b/lib/kernel/src/inet.erl @@ -72,7 +72,7 @@ %% timer interface -export([start_timer/1, timeout/1, timeout/2, stop_timer/1]). --export_type([address_family/0, hostent/0, hostname/0, ip4_address/0, +-export_type([address_family/0, socket_protocol/0, hostent/0, hostname/0, ip4_address/0, ip6_address/0, ip_address/0, port_number/0, local_address/0, socket_address/0, returned_non_ip_address/0, socket_setopt/0, socket_getopt/0, @@ -1452,11 +1452,14 @@ fdopen(Fd, Addr, Port, Opts, Protocol, Family, Type, Module) -> %% socket stat %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +-spec i() -> ok. i() -> i(tcp), i(udp), i(sctp). +-spec i(socket_protocol()) -> ok. i(Proto) -> i(Proto, [port, module, recv, sent, owner, local_address, foreign_address, state, type]). +-spec i(socket_protocol(), [atom()]) -> ok. i(tcp, Fs) -> ii(tcp_sockets(), Fs, tcp); i(udp, Fs) -> diff --git a/lib/kernel/src/inet_config.erl b/lib/kernel/src/inet_config.erl index 4bbc520449..9f76360b8b 100644 --- a/lib/kernel/src/inet_config.erl +++ b/lib/kernel/src/inet_config.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 1997-2016. All Rights Reserved. +%% Copyright Ericsson AB 1997-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -369,7 +369,7 @@ win32_load1(Reg,Type,HFileKey) -> end. win32_split_line(Line,nt) -> inet_parse:split_line(Line); -win32_split_line(Line,windows) -> string:tokens(Line, ","). +win32_split_line(Line,windows) -> string:lexemes(Line, ","). win32_get_strings(Reg, Names) -> win32_get_strings(Reg, Names, []). diff --git a/lib/kernel/src/inet_dns.erl b/lib/kernel/src/inet_dns.erl index d5f982cc51..f1f58bc872 100644 --- a/lib/kernel/src/inet_dns.erl +++ b/lib/kernel/src/inet_dns.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 1997-2016. All Rights Reserved. +%% Copyright Ericsson AB 1997-2017. All Rights Reserved. %% %% Licensed under the Apache License, Version 2.0 (the "License"); %% you may not use this file except in compliance with the License. @@ -29,7 +29,7 @@ -export([decode/1, encode/1]). --import(lists, [reverse/1, reverse/2, nthtail/2]). +-import(lists, [reverse/1]). -include("inet_int.hrl"). -include("inet_dns.hrl"). @@ -473,7 +473,7 @@ decode_data(<<Order:16,Preference:16,Data0/binary>>, _, ?S_NAPTR, Buffer) -> {Data2,Services} = decode_string(Data1), {Data,Regexp} = decode_characters(Data2, utf8), Replacement = decode_domain(Data, Buffer), - {Order,Preference,string:to_lower(Flags),string:to_lower(Services), + {Order,Preference,string:lowercase(Flags),string:lowercase(Services), Regexp,Replacement}; %% ?S_OPT falls through to default decode_data(Data, _, ?S_TXT, _) -> diff --git a/lib/kernel/src/inet_int.hrl b/lib/kernel/src/inet_int.hrl index bc5b67f7bf..357e27826c 100644 --- a/lib/kernel/src/inet_int.hrl +++ b/lib/kernel/src/inet_int.hrl @@ -100,6 +100,8 @@ -define(TCP_REQ_RECV, 42). -define(TCP_REQ_UNRECV, 43). -define(TCP_REQ_SHUTDOWN, 44). +-define(TCP_REQ_SENDFILE, 45). + %% UDP and SCTP requests -define(PACKET_REQ_RECV, 60). %%-define(SCTP_REQ_LISTEN, 61). MERGED @@ -319,6 +321,12 @@ [((X) bsr 24) band 16#ff, ((X) bsr 16) band 16#ff, ((X) bsr 8) band 16#ff, (X) band 16#ff]). +-define(int64(X), + [((X) bsr 56) band 16#ff, ((X) bsr 48) band 16#ff, + ((X) bsr 40) band 16#ff, ((X) bsr 32) band 16#ff, + ((X) bsr 24) band 16#ff, ((X) bsr 16) band 16#ff, + ((X) bsr 8) band 16#ff, (X) band 16#ff]). + -define(intAID(X), % For SCTP AssocID ?int32(X)). diff --git a/lib/kernel/src/inet_parse.erl b/lib/kernel/src/inet_parse.erl index 29804dc50b..e9685c6554 100644 --- a/lib/kernel/src/inet_parse.erl +++ b/lib/kernel/src/inet_parse.erl @@ -95,7 +95,7 @@ hosts(Fname,File) -> %% interface with a %if suffix. These kind of %% addresses maybe need to be gracefully handled %% throughout inet* and inet_drv. - case string:tokens(Address, "%") of + case string:lexemes(Address, "%") of [Addr,_] -> {ok,_} = address(Addr), skip; @@ -407,7 +407,7 @@ is_dom1([C | Cs]) when C >= $a, C =< $z -> is_dom_ldh(Cs); is_dom1([C | Cs]) when C >= $A, C =< $Z -> is_dom_ldh(Cs); is_dom1([C | Cs]) when C >= $0, C =< $9 -> case is_dom_ldh(Cs) of - true -> is_dom2(string:tokens([C | Cs],".")); + true -> is_dom2(string:lexemes([C | Cs],".")); false -> false end; is_dom1(_) -> false. diff --git a/lib/kernel/src/inet_res.erl b/lib/kernel/src/inet_res.erl index 90e49ddfdf..49aa5f8bda 100644 --- a/lib/kernel/src/inet_res.erl +++ b/lib/kernel/src/inet_res.erl @@ -859,15 +859,17 @@ query_ns(S0, Id, Buffer, IP, Port, Timer, Retry, I, {ok,S} -> Timeout = inet:timeout( (Tm * (1 bsl I)) div Retry, Timer), - {S, case query_udp( S, Id, Buffer, IP, Port, Timeout, Verbose) of {ok,#dns_rec{header=H}} when H#dns_header.tc -> TcpTimeout = inet:timeout(Tm*5, Timer), - query_tcp( - TcpTimeout, Id, Buffer, IP, Port, Verbose); - Reply -> Reply - end}; + {S, query_tcp( + TcpTimeout, Id, Buffer, IP, Port, Verbose)}; + {error, econnrefused} = Err -> + ok = udp_close(S), + {#sock{}, Err}; + Reply -> {S, Reply} + end; Error -> {S0,Error} end diff --git a/lib/kernel/src/kernel.app.src b/lib/kernel/src/kernel.app.src index 2a88cc7e26..82a3571da9 100644 --- a/lib/kernel/src/kernel.app.src +++ b/lib/kernel/src/kernel.app.src @@ -57,6 +57,7 @@ inet_tcp_dist, kernel, kernel_config, + kernel_refc, local_tcp, local_udp, net, @@ -88,6 +89,13 @@ inet_udp, inet_sctp, pg2, + raw_file_io, + raw_file_io_compressed, + raw_file_io_deflate, + raw_file_io_delayed, + raw_file_io_inflate, + raw_file_io_list, + raw_file_io_raw, seq_trace, standard_error, wrap_log_reader]}, @@ -107,6 +115,7 @@ heart, init, kernel_config, + kernel_refc, kernel_sup, net_kernel, net_sup, @@ -120,6 +129,6 @@ {applications, []}, {env, [{error_logger, tty}]}, {mod, {kernel, []}}, - {runtime_dependencies, ["erts-9.1", "stdlib-3.4", "sasl-3.0"]} + {runtime_dependencies, ["erts-10.0", "stdlib-3.5", "sasl-3.0"]} ] }. diff --git a/lib/kernel/src/kernel.erl b/lib/kernel/src/kernel.erl index cba57088ec..0382764b39 100644 --- a/lib/kernel/src/kernel.erl +++ b/lib/kernel/src/kernel.erl @@ -111,6 +111,13 @@ init([]) -> type => worker, modules => [kernel_config]}, + RefC = #{id => kernel_refc, + start => {kernel_refc, start_link, []}, + restart => permanent, + shutdown => 2000, + type => worker, + modules => [kernel_refc]}, + Code = #{id => code_server, start => {code, start_link, []}, restart => permanent, @@ -148,7 +155,7 @@ init([]) -> case init:get_argument(mode) of {ok, [["minimal"]]} -> - {ok, {SupFlags, [Code, File, StdError, User, Config, SafeSup]}}; + {ok, {SupFlags, [Code, File, StdError, User, Config, RefC, SafeSup]}}; _ -> Rpc = #{id => rex, start => {rpc, start_link, []}, @@ -199,7 +206,7 @@ init([]) -> {ok, {SupFlags, [Code, Rpc, Global, InetDb | DistAC] ++ [NetSup, GlGroup, File, SigSrv, - StdError, User, Config, SafeSup] ++ Timer}} + StdError, User, Config, RefC, SafeSup] ++ Timer}} end; init(safe) -> SupFlags = #{strategy => one_for_one, diff --git a/lib/kernel/src/kernel_refc.erl b/lib/kernel/src/kernel_refc.erl new file mode 100644 index 0000000000..05076dc885 --- /dev/null +++ b/lib/kernel/src/kernel_refc.erl @@ -0,0 +1,139 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2017. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +%% +-module(kernel_refc). + +-behaviour(gen_server). + +%% External exports +-export([start_link/0, scheduler_wall_time/1]). +%% Internal exports +-export([init/1, handle_info/2, terminate/2]). +-export([handle_call/3, handle_cast/2, code_change/3]). + +%%%----------------------------------------------------------------- +%%% This module implements a process that handles reference counters for +%%% various erts or other kernel resources which needs reference counting. +%%% +%%% Should not be documented nor used directly by user applications. +%%%----------------------------------------------------------------- +start_link() -> + gen_server:start_link({local,kernel_refc}, kernel_refc, [], []). + +-spec scheduler_wall_time(boolean()) -> boolean(). +scheduler_wall_time(Bool) -> + gen_server:call(kernel_refc, {scheduler_wall_time, self(), Bool}, infinity). + +%%----------------------------------------------------------------- +%% Callback functions from gen_server +%%----------------------------------------------------------------- + +-spec init([]) -> {'ok', map()} | {'stop', term()}. + +init([]) -> + resource(scheduler_wall_time, false), + {ok, #{scheduler_wall_time=>#{}}}. + +-spec handle_call(term(), term(), State) -> {'reply', term(), State}. +handle_call({What, Who, false}, _From, State) -> + {Reply, Cnt} = do_stop(What, maps:get(What, State), Who), + {reply, Reply, State#{What:=Cnt}}; +handle_call({What, Who, true}, _From, State) -> + {Reply, Cnt} = do_start(What, maps:get(What, State), Who), + {reply, Reply, State#{What:=Cnt}}; +handle_call(_, _From, State) -> + {reply, badarg, State}. + +-spec handle_cast(term(), State) -> {'noreply', State}. +handle_cast(_, State) -> + {noreply, State}. + +-spec handle_info(term(), State) -> {'noreply', State}. +handle_info({'DOWN', _Ref, process, Pid, _}, State) -> + Cleanup = fun(Resource, Cnts) -> + cleanup(Resource, Cnts, Pid) + end, + {noreply, maps:map(Cleanup, State)}; +handle_info(_, State) -> + {noreply, State}. + +-spec terminate(term(), term()) -> 'ok'. +terminate(_Reason, _State) -> + ok. + +-spec code_change(term(), State, term()) -> {'ok', State}. +code_change(_OldVsn, State, _Extra) -> + {ok, State}. + +%%----------------------------------------------------------------- +%% Internal functions +%%----------------------------------------------------------------- + +do_start(Resource, Cnt, Pid) -> + case maps:get(Pid, Cnt, undefined) of + undefined -> + Ref = erlang:monitor(process, Pid), + case any(Cnt) of + true -> + {true, Cnt#{Pid=>{1, Ref}}}; + false -> + resource(Resource, true), + {false, Cnt#{Pid=>{1, Ref}}} + end; + {N, Ref} -> + {true, Cnt#{Pid=>{N+1, Ref}}} + end. + +do_stop(Resource, Cnt0, Pid) -> + case maps:get(Pid, Cnt0, undefined) of + undefined -> + {any(Cnt0), Cnt0}; + {1, Ref} -> + erlang:demonitor(Ref, [flush]), + Cnt = maps:remove(Pid, Cnt0), + case any(Cnt) of + true -> + {true, Cnt}; + false -> + resource(Resource, false), + {true, Cnt} + end; + {N, Ref} -> + {true, Cnt0#{Pid=>{N-1, Ref}}} + end. + +cleanup(Resource, Cnt0, Pid) -> + case maps:is_key(Pid, Cnt0) of + true -> + Cnt = maps:remove(Pid, Cnt0), + case any(Cnt) of + true -> + Cnt; + false -> + resource(Resource, false), + Cnt + end; + false -> + Cnt0 + end. + +any(Cnt) -> maps:size(Cnt) > 0. + +resource(scheduler_wall_time, Enable) -> + _ = erts_internal:scheduler_wall_time(Enable). diff --git a/lib/kernel/src/net_kernel.erl b/lib/kernel/src/net_kernel.erl index 7da89dd7cb..cdb10a7b12 100644 --- a/lib/kernel/src/net_kernel.erl +++ b/lib/kernel/src/net_kernel.erl @@ -70,8 +70,8 @@ protocol_childspecs/0, epmd_module/0]). --export([connect/1, disconnect/1, hidden_connect/1, passive_cnct/1]). --export([hidden_connect_node/1]). %% explicit connect +-export([disconnect/1, passive_cnct/1]). +-export([hidden_connect_node/1]). -export([set_net_ticktime/1, set_net_ticktime/2, get_net_ticktime/0]). -export([node_info/1, node_info/2, nodes_info/0, @@ -122,6 +122,7 @@ -record(connection, { node, %% remote node name + conn_id, %% Connection identity state, %% pending | up | up_pending owner, %% owner pid pending_owner, %% possible new owner @@ -247,14 +248,15 @@ ticktime_res(A) when is_atom(A) -> A. %% Called though BIF's -connect(Node) -> do_connect(Node, normal, false). %%% Long timeout if blocked (== barred), only affects nodes with %%% {dist_auto_connect, once} set. -passive_cnct(Node) -> do_connect(Node, normal, true). -disconnect(Node) -> request({disconnect, Node}). +passive_cnct(Node) -> + case request({passive_cnct, Node}) of + ignored -> false; + Other -> Other + end. -%% connect but not seen -hidden_connect(Node) -> do_connect(Node, hidden, false). +disconnect(Node) -> request({disconnect, Node}). %% Should this node publish itself on Node? publish_on_node(Node) when is_atom(Node) -> @@ -272,67 +274,30 @@ connect_node(Node) when is_atom(Node) -> hidden_connect_node(Node) when is_atom(Node) -> request({connect, hidden, Node}). -do_connect(Node, Type, WaitForBarred) -> %% Type = normal | hidden - case catch ets:lookup(sys_dist, Node) of - {'EXIT', _} -> - ?connect_failure(Node,{table_missing, sys_dist}), - false; - [#barred_connection{}] -> - case WaitForBarred of - false -> - false; - true -> - Pid = spawn(?MODULE,passive_connect_monitor,[self(),Node]), - receive - {Pid, true} -> - %%io:format("Net Kernel: barred connection (~p) " - %% "connected from other end.~n",[Node]), - true; - {Pid, false} -> - ?connect_failure(Node,{barred_connection, - ets:lookup(sys_dist, Node)}), - %%io:format("Net Kernel: barred connection (~p) " - %% "- failure.~n",[Node]), - false - end - end; - Else -> - case application:get_env(kernel, dist_auto_connect) of - {ok, never} -> - ?connect_failure(Node,{dist_auto_connect,never}), - false; - % This might happen due to connection close - % not beeing propagated to user space yet. - % Save the day by just not connecting... - {ok, once} when Else =/= [], - (hd(Else))#connection.state =:= up -> - ?connect_failure(Node,{barred_connection, - ets:lookup(sys_dist, Node)}), - false; - _ -> - request({connect, Type, Node}) - end - end. -passive_connect_monitor(Parent, Node) -> +passive_connect_monitor(From, Node) -> ok = monitor_nodes(true,[{node_type,all}]), - case lists:member(Node,nodes([connected])) of - true -> - ok = monitor_nodes(false,[{node_type,all}]), - Parent ! {self(),true}; - _ -> - Ref = make_ref(), - Tref = erlang:send_after(connecttime(),self(),Ref), - receive - Ref -> - ok = monitor_nodes(false,[{node_type,all}]), - Parent ! {self(), false}; - {nodeup,Node,_} -> - ok = monitor_nodes(false,[{node_type,all}]), - _ = erlang:cancel_timer(Tref), - Parent ! {self(),true} - end - end. + Reply = case lists:member(Node,nodes([connected])) of + true -> + io:format("~p: passive_connect_monitor ~p\n", [self(), ?LINE]), + true; + _ -> + receive + {nodeup,Node,_} -> + io:format("~p: passive_connect_monitor ~p\n", [self(), ?LINE]), + true + after connecttime() -> + io:format("~p: passive_connect_monitor ~p\n", [self(), ?LINE]), + false + end + end, + ok = monitor_nodes(false,[{node_type,all}]), + io:format("~p: passive_connect_monitor ~p\n", [self(), ?LINE]), + {Pid, Tag} = From, + io:format("~p: passive_connect_monitor ~p\n", [self(), ?LINE]), + erlang:send(Pid, {Tag, Reply}), + io:format("~p: passive_connect_monitor ~p\n", [self(), ?LINE]). + %% If the net_kernel isn't running we ignore all requests to the %% kernel, thus basically accepting them :-) @@ -394,40 +359,135 @@ init({Name, LongOrShortNames, TickT, CleanHalt}) -> end. +do_auto_connect(Type, Node, ConnId, WaitForBarred, From, State) -> + ConnLookup = ets:lookup(sys_dist, Node), + + case ConnLookup of + [#barred_connection{}] -> + case WaitForBarred of + false -> + {reply, false, State}; + true -> + spawn(?MODULE,passive_connect_monitor,[From,Node]), + {noreply, State} + end; + + [#connection{conn_id=ConnId, state = up}] -> + {reply, true, State}; + [#connection{conn_id=ConnId, waiting=Waiting}=Conn] -> + case From of + noreply -> ok; + _ -> ets:insert(sys_dist, Conn#connection{waiting = [From|Waiting]}) + end, + {noreply, State}; + + _ -> + case application:get_env(kernel, dist_auto_connect) of + {ok, never} -> + ?connect_failure(Node,{dist_auto_connect,never}), + {reply, false, State}; + + %% This might happen due to connection close + %% not beeing propagated to user space yet. + %% Save the day by just not connecting... + {ok, once} when ConnLookup =/= [], + (hd(ConnLookup))#connection.state =:= up -> + ?connect_failure(Node,{barred_connection, + ets:lookup(sys_dist, Node)}), + {reply, false, State}; + _ -> + case setup(ConnLookup, Node,ConnId,Type,From,State) of + {ok, SetupPid} -> + Owners = [{SetupPid, Node} | State#state.conn_owners], + {noreply,State#state{conn_owners=Owners}}; + _Error -> + ?connect_failure(Node, {setup_call, failed, _Error}), + {reply, false, State} + end + end + end. + + +do_explicit_connect([#connection{conn_id = ConnId, state = up}], _, _, ConnId, _From, State) -> + {reply, true, State}; +do_explicit_connect([#connection{conn_id = ConnId}=Conn], _, _, ConnId, From, State) + when Conn#connection.state =:= pending; + Conn#connection.state =:= up_pending -> + Waiting = Conn#connection.waiting, + ets:insert(sys_dist, Conn#connection{waiting = [From|Waiting]}), + {noreply, State}; +do_explicit_connect([#barred_connection{}], Type, Node, ConnId, From , State) -> + %% Barred connection only affects auto_connect, ignore it. + do_explicit_connect([], Type, Node, ConnId, From , State); +do_explicit_connect(ConnLookup, Type, Node, ConnId, From , State) -> + case setup(ConnLookup, Node,ConnId,Type,From,State) of + {ok, SetupPid} -> + Owners = [{SetupPid, Node} | State#state.conn_owners], + {noreply,State#state{conn_owners=Owners}}; + _Error -> + ?connect_failure(Node, {setup_call, failed, _Error}), + {reply, false, State} + end. + +-define(ERTS_DIST_CON_ID_MASK, 16#ffffff). % also in external.h + +verify_new_conn_id([], {Nr,_DHandle}) + when (Nr band (bnot ?ERTS_DIST_CON_ID_MASK)) =:= 0 -> + true; +verify_new_conn_id([#connection{conn_id = {Old,_}}], {New,_}) + when New =:= ((Old+1) band ?ERTS_DIST_CON_ID_MASK) -> + true; +verify_new_conn_id(_, _) -> + false. + + + %% ------------------------------------------------------------ %% handle_call. %% ------------------------------------------------------------ %% -%% Set up a connection to Node. -%% The response is delayed until the connection is up and -%% running. +%% Passive auto-connect to Node. +%% The response is delayed until the connection is up and running. %% -handle_call({connect, _, Node}, From, State) when Node =:= node() -> +handle_call({passive_cnct, Node}, From, State) when Node =:= node() -> + async_reply({reply, true, State}, From); +handle_call({passive_cnct, Node}, From, State) -> + verbose({passive_cnct, Node}, 1, State), + Type = normal, + WaitForBarred = true, + R = case (catch erts_internal:new_connection(Node)) of + {Nr,_DHandle}=ConnId when is_integer(Nr) -> + do_auto_connect(Type, Node, ConnId, WaitForBarred, From, State); + + _Error -> + error_logger:error_msg("~n** Cannot get connection id for node ~w~n", + [Node]), + {reply, false, State} + end, + + return_call(R, From); + +%% +%% Explicit connect +%% The response is delayed until the connection is up and running. +%% +handle_call({connect, _, Node, _, _}, From, State) when Node =:= node() -> async_reply({reply, true, State}, From); handle_call({connect, Type, Node}, From, State) -> verbose({connect, Type, Node}, 1, State), - case ets:lookup(sys_dist, Node) of - [Conn] when Conn#connection.state =:= up -> - async_reply({reply, true, State}, From); - [Conn] when Conn#connection.state =:= pending -> - Waiting = Conn#connection.waiting, - ets:insert(sys_dist, Conn#connection{waiting = [From|Waiting]}), - {noreply, State}; - [Conn] when Conn#connection.state =:= up_pending -> - Waiting = Conn#connection.waiting, - ets:insert(sys_dist, Conn#connection{waiting = [From|Waiting]}), - {noreply, State}; - _ -> - case setup(Node,Type,From,State) of - {ok, SetupPid} -> - Owners = [{SetupPid, Node} | State#state.conn_owners], - {noreply,State#state{conn_owners=Owners}}; - _ -> - ?connect_failure(Node, {setup_call, failed}), - async_reply({reply, false, State}, From) - end - end; + ConnLookup = ets:lookup(sys_dist, Node), + R = case (catch erts_internal:new_connection(Node)) of + {Nr,_DHandle}=ConnId when is_integer(Nr) -> + do_explicit_connect(ConnLookup, Type, Node, ConnId, From, State); + + _Error -> + error_logger:error_msg("~n** Cannot get connection id for node ~w~n", + [Node]), + {reply, false, State} + end, + return_call(R, From); + %% %% Close the connection to Node. @@ -634,6 +694,26 @@ terminate(_Reason, State) -> %% ------------------------------------------------------------ %% +%% Asynchronous auto connect request +%% +handle_info({auto_connect,Node, Nr, DHandle}, State) -> + verbose({auto_connect, Node, Nr, DHandle}, 1, State), + ConnId = {Nr, DHandle}, + NewState = + case do_auto_connect(normal, Node, ConnId, false, noreply, State) of + {noreply, S} -> %% Pending connection + S; + + {reply, true, S} -> %% Already connected + S; + + {reply, false, S} -> %% Connection refused + erts_internal:abort_connection(Node, ConnId), + S + end, + {noreply, NewState}; + +%% %% accept a new connection. %% handle_info({accept,AcceptPid,Socket,Family,Proto}, State) -> @@ -713,14 +793,23 @@ handle_info({AcceptPid, {accept_pending,MyNode,Node,Address,Type}}, State) -> AcceptPid ! {self(), {accept_pending, already_pending}}, {noreply, State}; _ -> - ets:insert(sys_dist, #connection{node = Node, - state = pending, - owner = AcceptPid, - address = Address, - type = Type}), - AcceptPid ! {self(),{accept_pending,ok}}, - Owners = [{AcceptPid,Node} | State#state.conn_owners], - {noreply, State#state{conn_owners = Owners}} + case (catch erts_internal:new_connection(Node)) of + {Nr,_DHandle}=ConnId when is_integer(Nr) -> + ets:insert(sys_dist, #connection{node = Node, + conn_id = ConnId, + state = pending, + owner = AcceptPid, + address = Address, + type = Type}), + AcceptPid ! {self(),{accept_pending,ok}}, + Owners = [{AcceptPid,Node} | State#state.conn_owners], + {noreply, State#state{conn_owners = Owners}}; + + _ -> + error_logger:error_msg("~n** Cannot get connection id for node ~w~n", + [Node]), + AcceptPid ! {self(),{accept_pending,nok_pending}} + end end; handle_info({SetupPid, {is_pending, Node}}, State) -> @@ -906,6 +995,7 @@ pending_nodedown(Conn, Node, Type, State) -> % Don't bar connections that have never been alive %mark_sys_dist_nodedown(Node), % - instead just delete the node: + erts_internal:abort_connection(Node, Conn#connection.conn_id), ets:delete(sys_dist, Node), reply_waiting(Node,Conn#connection.waiting, false), case Type of @@ -920,7 +1010,9 @@ up_pending_nodedown(Conn, Node, _Reason, _Type, State) -> AcceptPid = Conn#connection.pending_owner, Owners = State#state.conn_owners, Pend = lists:keydelete(AcceptPid, 1, State#state.pend_owners), + erts_internal:abort_connection(Node, Conn#connection.conn_id), Conn1 = Conn#connection { owner = AcceptPid, + conn_id = erts_internal:new_connection(Node), pending_owner = undefined, state = pending }, ets:insert(sys_dist, Conn1), @@ -928,15 +1020,16 @@ up_pending_nodedown(Conn, Node, _Reason, _Type, State) -> State#state{conn_owners = [{AcceptPid,Node}|Owners], pend_owners = Pend}. -up_nodedown(_Conn, Node, _Reason, Type, State) -> - mark_sys_dist_nodedown(Node), +up_nodedown(Conn, Node, _Reason, Type, State) -> + mark_sys_dist_nodedown(Conn, Node), case Type of normal -> ?nodedown(Node, State); _ -> ok end, State. -mark_sys_dist_nodedown(Node) -> +mark_sys_dist_nodedown(Conn, Node) -> + erts_internal:abort_connection(Node, Conn#connection.conn_id), case application:get_env(kernel, dist_auto_connect) of {ok, once} -> ets:insert(sys_dist, #barred_connection{node = Node}); @@ -1179,15 +1272,8 @@ spawn_func(_,{From,Tag},M,F,A,Gleader) -> %% Set up connection to a new node. %% ----------------------------------------------------------- -setup(Node,Type,From,State) -> - Allowed = State#state.allowed, - case lists:member(Node, Allowed) of - false when Allowed =/= [] -> - error_msg("** Connection attempt with " - "disallowed node ~w ** ~n", [Node]), - {error, bad_node}; - _ -> - case select_mod(Node, State#state.listen) of +setup(ConnLookup, Node,ConnId,Type,From,State) -> + case setup_check(ConnLookup, Node, ConnId, State) of {ok, L} -> Mod = L#listen.module, LAddr = L#listen.address, @@ -1200,18 +1286,45 @@ setup(Node,Type,From,State) -> Addr = LAddr#net_address { address = undefined, host = undefined }, + Waiting = case From of + noreply -> []; + _ -> [From] + end, ets:insert(sys_dist, #connection{node = Node, + conn_id = ConnId, state = pending, owner = Pid, - waiting = [From], + waiting = Waiting, address = Addr, type = normal}), {ok, Pid}; Error -> Error - end end. +setup_check(ConnLookup, Node, ConnId, State) -> + Allowed = State#state.allowed, + case lists:member(Node, Allowed) of + false when Allowed =/= [] -> + error_msg("** Connection attempt with " + "disallowed node ~w ** ~n", [Node]), + {error, bad_node}; + _ -> + case verify_new_conn_id(ConnLookup, ConnId) of + false -> + error_msg("** Connection attempt to ~w with " + "bad connection id ~w ** ~n", [Node, ConnId]), + {error, bad_conn_id}; + true -> + case select_mod(Node, State#state.listen) of + {ok, _L}=OK -> OK; + Error -> Error + end + end + end. + + + %% %% Find a module that is willing to handle connection setup to Node %% @@ -1652,6 +1765,11 @@ verbose(_, _, _) -> getnode(P) when is_pid(P) -> node(P); getnode(P) -> P. +return_call({noreply, _State}=R, _From) -> + R; +return_call(R, From) -> + async_reply(R, From). + async_reply({reply, Msg, State}, From) -> async_gen_server_reply(From, Msg), {noreply, State}. diff --git a/lib/kernel/src/os.erl b/lib/kernel/src/os.erl index ae188ae932..1e9db80058 100644 --- a/lib/kernel/src/os.erl +++ b/lib/kernel/src/os.erl @@ -25,41 +25,36 @@ -include("file.hrl"). +-export_type([env_var_name/0, env_var_value/0, env_var_name_value/0]). + +-export([getenv/0, getenv/1, getenv/2, putenv/2, unsetenv/1]). + %%% BIFs --export([getenv/0, getenv/1, getenv/2, getpid/0, - perf_counter/0, perf_counter/1, - putenv/2, set_signal/2, system_time/0, system_time/1, - timestamp/0, unsetenv/1]). +-export([get_env_var/1, getpid/0, list_env_vars/0, perf_counter/0, + perf_counter/1, set_env_var/2, set_signal/2, system_time/0, + system_time/1, timestamp/0, unset_env_var/1]). -type os_command() :: atom() | io_lib:chars(). -type os_command_opts() :: #{ max_size => non_neg_integer() | infinity }. -export_type([os_command/0, os_command_opts/0]). --spec getenv() -> [string()]. +-type env_var_name() :: nonempty_string(). -getenv() -> erlang:nif_error(undef). +-type env_var_value() :: string(). --spec getenv(VarName) -> Value | false when - VarName :: string(), - Value :: string(). +-type env_var_name_value() :: nonempty_string(). -getenv(_) -> +-spec list_env_vars() -> [{env_var_name(), env_var_value()}]. +list_env_vars() -> erlang:nif_error(undef). --spec getenv(VarName, DefaultValue) -> Value when - VarName :: string(), - DefaultValue :: string(), - Value :: string(). - -getenv(VarName, DefaultValue) -> - case os:getenv(VarName) of - false -> - DefaultValue; - Value -> - Value - end. +-spec get_env_var(VarName) -> Value | false when + VarName :: env_var_name(), + Value :: env_var_value(). +get_env_var(_VarName) -> + erlang:nif_error(undef). -spec getpid() -> Value when Value :: string(). @@ -79,11 +74,10 @@ perf_counter() -> perf_counter(Unit) -> erlang:convert_time_unit(os:perf_counter(), perf_counter, Unit). --spec putenv(VarName, Value) -> true when - VarName :: string(), - Value :: string(). - -putenv(_, _) -> +-spec set_env_var(VarName, Value) -> true when + VarName :: env_var_name(), + Value :: env_var_value(). +set_env_var(_, _) -> erlang:nif_error(undef). -spec system_time() -> integer(). @@ -103,10 +97,9 @@ system_time(_Unit) -> timestamp() -> erlang:nif_error(undef). --spec unsetenv(VarName) -> true when - VarName :: string(). - -unsetenv(_) -> +-spec unset_env_var(VarName) -> true when + VarName :: env_var_name(). +unset_env_var(_) -> erlang:nif_error(undef). -spec set_signal(Signal, Option) -> 'ok' when @@ -120,6 +113,39 @@ set_signal(_Signal, _Option) -> %%% End of BIFs +-spec getenv() -> [env_var_name_value()]. +getenv() -> + [lists:flatten([Key, $=, Value]) || {Key, Value} <- os:list_env_vars() ]. + +-spec getenv(VarName) -> Value | false when + VarName :: env_var_name(), + Value :: env_var_value(). +getenv(VarName) -> + os:get_env_var(VarName). + +-spec getenv(VarName, DefaultValue) -> Value when + VarName :: env_var_name(), + DefaultValue :: env_var_value(), + Value :: env_var_value(). +getenv(VarName, DefaultValue) -> + case os:getenv(VarName) of + false -> + DefaultValue; + Value -> + Value + end. + +-spec putenv(VarName, Value) -> true when + VarName :: env_var_name(), + Value :: env_var_value(). +putenv(VarName, Value) -> + os:set_env_var(VarName, Value). + +-spec unsetenv(VarName) -> true when + VarName :: env_var_name(). +unsetenv(VarName) -> + os:unset_env_var(VarName). + -spec type() -> {Osfamily, Osname} when Osfamily :: unix | win32, Osname :: atom(). @@ -183,7 +209,7 @@ verify_executable(Name0, [Ext|Rest], OrigExtensions) -> end; verify_executable(Name, [], OrigExtensions) when OrigExtensions =/= [""] -> %% Windows %% Will only happen on windows, hence case insensitivity - case can_be_full_name(string:to_lower(Name),OrigExtensions) of + case can_be_full_name(string:lowercase(Name),OrigExtensions) of true -> verify_executable(Name,[""],[""]); _ -> @@ -245,8 +271,7 @@ cmd(Cmd) -> Command :: os_command(), Options :: os_command_opts(). cmd(Cmd, Opts) -> - validate(Cmd), - {SpawnCmd, SpawnOpts, SpawnInput, Eot} = mk_cmd(os:type(), Cmd), + {SpawnCmd, SpawnOpts, SpawnInput, Eot} = mk_cmd(os:type(), validate(Cmd)), Port = open_port({spawn, SpawnCmd}, [binary, stderr_to_stdout, stream, in, hide | SpawnOpts]), MonRef = erlang:monitor(port, Port), @@ -266,8 +291,6 @@ mk_cmd({win32,Wtype}, Cmd) -> {Cspec,_} -> lists:concat([Cspec," /c",Cmd]) end, {Command, [], [], <<>>}; -mk_cmd(OsType,Cmd) when is_atom(Cmd) -> - mk_cmd(OsType, atom_to_list(Cmd)); mk_cmd(_,Cmd) -> %% Have to send command in like this in order to make sh commands like %% cd and ulimit available @@ -290,17 +313,33 @@ mk_cmd(_,Cmd) -> <<$\^D>>}. validate(Atom) when is_atom(Atom) -> - ok; + validate(atom_to_list(Atom)); validate(List) when is_list(List) -> - validate1(List). + case validate1(List) of + false -> + List; + true -> + %% Had zeros at end; remove them... + string:trim(List, trailing, [0]) + end. -validate1([C|Rest]) when is_integer(C) -> +validate1([0|Rest]) -> + validate2(Rest); +validate1([C|Rest]) when is_integer(C), C > 0 -> validate1(Rest); validate1([List|Rest]) when is_list(List) -> - validate1(List), - validate1(Rest); + validate1(List) or validate1(Rest); validate1([]) -> - ok. + false. + +%% Ensure that the rest is zero only... +validate2([]) -> + true; +validate2([0|Rest]) -> + validate2(Rest); +validate2([List|Rest]) when is_list(List) -> + validate2(List), + validate2(Rest). get_data(Port, MonRef, Eot, Sofar, Size, Max) -> receive diff --git a/lib/kernel/src/raw_file_io.erl b/lib/kernel/src/raw_file_io.erl new file mode 100644 index 0000000000..e3c07c8f78 --- /dev/null +++ b/lib/kernel/src/raw_file_io.erl @@ -0,0 +1,75 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2017. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +%% +-module(raw_file_io). + +-export([open/2]). + +open(Filename, Modes) -> + %% Layers are applied in this order, and the listed modules will call this + %% function again as necessary. eg. a raw compressed delayed file in list + %% mode will walk through [_list -> _compressed -> _delayed -> _raw]. + ModuleOrder = [{raw_file_io_list, fun match_list/1}, + {raw_file_io_compressed, fun match_compressed/1}, + {raw_file_io_delayed, fun match_delayed/1}, + {raw_file_io_raw, fun match_raw/1}], + open_1(ModuleOrder, Filename, add_implicit_modes(Modes)). +open_1([], _Filename, _Modes) -> + error(badarg); +open_1([{Module, Match} | Rest], Filename, Modes) -> + case lists:any(Match, Modes) of + true -> + {Options, ChildModes} = + lists:partition(fun(Mode) -> Match(Mode) end, Modes), + Module:open_layer(Filename, ChildModes, Options); + false -> + open_1(Rest, Filename, Modes) + end. + +%% 'read' and 'list' mode are enabled unless disabled by another option, so +%% we'll explicitly add them to avoid duplicating this logic in child layers. +add_implicit_modes(Modes0) -> + Modes1 = add_unless_matched(Modes0, fun match_writable/1, read), + add_unless_matched(Modes1, fun match_binary/1, list). +add_unless_matched(Modes, Match, Default) -> + case lists:any(Match, Modes) of + false -> [Default | Modes]; + true -> Modes + end. + +match_list(list) -> true; +match_list(_Other) -> false. + +match_compressed(compressed) -> true; +match_compressed(_Other) -> false. + +match_delayed({delayed_write, _Size, _Timeout}) -> true; +match_delayed(delayed_write) -> true; +match_delayed(_Other) -> false. + +match_raw(raw) -> true; +match_raw(_Other) -> false. + +match_writable(write) -> true; +match_writable(append) -> true; +match_writable(exclusive) -> true; +match_writable(_Other) -> false. + +match_binary(binary) -> true; +match_binary(_Other) -> false. diff --git a/lib/kernel/src/raw_file_io_compressed.erl b/lib/kernel/src/raw_file_io_compressed.erl new file mode 100644 index 0000000000..d5ab042d25 --- /dev/null +++ b/lib/kernel/src/raw_file_io_compressed.erl @@ -0,0 +1,134 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2017. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +%% +-module(raw_file_io_compressed). + +-export([close/1, sync/1, datasync/1, truncate/1, advise/4, allocate/3, + position/2, write/2, pwrite/2, pwrite/3, + read_line/1, read/2, pread/2, pread/3]). + +%% OTP internal. +-export([ipread_s32bu_p32bu/3, sendfile/8]). + +-export([open_layer/3]). + +-include("file_int.hrl"). + +open_layer(Filename, Modes, Options) -> + IsAppend = lists:member(append, Modes), + IsDeflate = lists:member(write, Modes), + IsInflate = lists:member(read, Modes), + if + IsDeflate, IsInflate; IsAppend -> + {error, einval}; + IsDeflate, not IsInflate -> + start_server_module(raw_file_io_deflate, Filename, Modes, Options); + IsInflate -> + start_server_module(raw_file_io_inflate, Filename, Modes, Options) + end. + +start_server_module(Module, Filename, Modes, Options) -> + Secret = make_ref(), + case gen_statem:start(Module, {self(), Secret, Options}, []) of + {ok, Pid} -> open_next_layer(Pid, Secret, Filename, Modes); + Other -> Other + end. + +open_next_layer(Pid, Secret, Filename, Modes) -> + case gen_statem:call(Pid, {'$open', Secret, Filename, Modes}, infinity) of + ok -> + PublicFd = #file_descriptor{ + module = raw_file_io_compressed, data = {self(), Pid} }, + {ok, PublicFd}; + Other -> Other + end. + +close(Fd) -> + wrap_call(Fd, [close]). + +sync(Fd) -> + wrap_call(Fd, [sync]). +datasync(Fd) -> + wrap_call(Fd, [datasync]). + +truncate(Fd) -> + wrap_call(Fd, [truncate]). + +advise(Fd, Offset, Length, Advise) -> + wrap_call(Fd, [advise, Offset, Length, Advise]). +allocate(Fd, Offset, Length) -> + wrap_call(Fd, [allocate, Offset, Length]). + +position(Fd, Mark) -> + wrap_call(Fd, [position, Mark]). + +write(Fd, IOData) -> + try + CompactedData = erlang:iolist_to_iovec(IOData), + wrap_call(Fd, [write, CompactedData]) + catch + error:badarg -> {error, badarg} + end. + +pwrite(Fd, Offset, IOData) -> + try + CompactedData = erlang:iolist_to_iovec(IOData), + wrap_call(Fd, [pwrite, Offset, CompactedData]) + catch + error:badarg -> {error, badarg} + end. +pwrite(Fd, LocBytes) -> + try + CompactedLocBytes = + [ {Offset, erlang:iolist_to_iovec(IOData)} || + {Offset, IOData} <- LocBytes ], + wrap_call(Fd, [pwrite, CompactedLocBytes]) + catch + error:badarg -> {error, badarg} + end. + +read_line(Fd) -> + wrap_call(Fd, [read_line]). +read(Fd, Size) -> + wrap_call(Fd, [read, Size]). +pread(Fd, Offset, Size) -> + wrap_call(Fd, [pread, Offset, Size]). +pread(Fd, LocNums) -> + wrap_call(Fd, [pread, LocNums]). + +ipread_s32bu_p32bu(Fd, Offset, MaxSize) -> + wrap_call(Fd, [ipread_s32bu_p32bu, Offset, MaxSize]). + +sendfile(_,_,_,_,_,_,_,_) -> + {error, enotsup}. + +wrap_call(Fd, Command) -> + {_Owner, Pid} = get_fd_data(Fd), + try gen_statem:call(Pid, Command, infinity) of + Result -> Result + catch + exit:{noproc, _StackTrace} -> {error, einval} + end. + +get_fd_data(#file_descriptor{ data = Data }) -> + {Owner, _ServerPid} = Data, + case self() of + Owner -> Data; + _ -> error(not_on_controlling_process) + end. diff --git a/lib/kernel/src/raw_file_io_deflate.erl b/lib/kernel/src/raw_file_io_deflate.erl new file mode 100644 index 0000000000..acfc546743 --- /dev/null +++ b/lib/kernel/src/raw_file_io_deflate.erl @@ -0,0 +1,159 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2017. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +%% +-module(raw_file_io_deflate). + +-behavior(gen_statem). + +-export([init/1, callback_mode/0, terminate/3]). +-export([opening/3, opened/3]). + +-include("file_int.hrl"). + +-define(GZIP_WBITS, 16 + 15). + +callback_mode() -> state_functions. + +init({Owner, Secret, [compressed]}) -> + Monitor = monitor(process, Owner), + Z = zlib:open(), + ok = zlib:deflateInit(Z, default, deflated, ?GZIP_WBITS, 8, default), + Data = + #{ owner => Owner, + monitor => Monitor, + secret => Secret, + position => 0, + zlib => Z }, + {ok, opening, Data}. + +opening({call, From}, {'$open', Secret, Filename, Modes}, #{ secret := Secret } = Data) -> + case raw_file_io:open(Filename, Modes) of + {ok, PrivateFd} -> + NewData = Data#{ handle => PrivateFd }, + {next_state, opened, NewData, [{reply, From, ok}]}; + Other -> + {stop_and_reply, normal, [{reply, From, Other}]} + end; +opening(_Event, _Contents, _Data) -> + {keep_state_and_data, [postpone]}. + +%% + +opened(info, {'DOWN', Monitor, process, _Owner, Reason}, #{ monitor := Monitor } = Data) -> + if + Reason =/= kill -> flush_deflate_state(Data); + Reason =:= kill -> ignored + end, + {stop, shutdown}; + +opened(info, _Message, _Data) -> + keep_state_and_data; + +opened({call, {Owner, _Tag} = From}, [close], #{ owner := Owner } = Data) -> + #{ handle := PrivateFd } = Data, + Response = + case flush_deflate_state(Data) of + ok -> ?CALL_FD(PrivateFd, close, []); + Other -> Other + end, + {stop_and_reply, normal, [{reply, From, Response}]}; + +opened({call, {Owner, _Tag} = From}, [position, Mark], #{ owner := Owner } = Data) -> + case position(Data, Mark) of + {ok, NewData, Result} -> + Response = {ok, Result}, + {keep_state, NewData, [{reply, From, Response}]}; + Other -> + {keep_state_and_data, [{reply, From, Other}]} + end; + +opened({call, {Owner, _Tag} = From}, [write, IOVec], #{ owner := Owner } = Data) -> + case write(Data, IOVec) of + {ok, NewData} -> {keep_state, NewData, [{reply, From, ok}]}; + Other -> {keep_state_and_data, [{reply, From, Other}]} + end; + +opened({call, {Owner, _Tag} = From}, [read, _Size], #{ owner := Owner }) -> + Response = {error, ebadf}, + {keep_state_and_data, [{reply, From, Response}]}; + +opened({call, {Owner, _Tag} = From}, [read_line], #{ owner := Owner }) -> + Response = {error, ebadf}, + {keep_state_and_data, [{reply, From, Response}]}; + +opened({call, {Owner, _Tag} = From}, _Command, #{ owner := Owner }) -> + Response = {error, enotsup}, + {keep_state_and_data, [{reply, From, Response}]}; + +opened({call, _From}, _Command, _Data) -> + %% The client functions filter this out, so we'll crash if the user does + %% anything stupid on purpose. + {shutdown, protocol_violation}; + +opened(_Event, _Request, _Data) -> + keep_state_and_data. + +write(Data, IOVec) -> + #{ handle := PrivateFd, position := Position, zlib := Z } = Data, + UncompressedSize = iolist_size(IOVec), + case ?CALL_FD(PrivateFd, write, [zlib:deflate(Z, IOVec)]) of + ok -> {ok, Data#{ position := (Position + UncompressedSize) }}; + Other -> Other + end. + +%% +%% We support "seeking" forward as long as it isn't relative to EOF. +%% +%% Seeking is a bit of a misnomer as it's really just compressing zeroes until +%% we reach the desired point, but it has always behaved like this. +%% + +position(Data, Mark) when is_atom(Mark) -> + position(Data, {Mark, 0}); +position(Data, Offset) when is_integer(Offset) -> + position(Data, {bof, Offset}); +position(Data, {bof, Offset}) when is_integer(Offset) -> + position_1(Data, Offset); +position(Data, {cur, Offset}) when is_integer(Offset) -> + #{ position := Position } = Data, + position_1(Data, Position + Offset); +position(_Data, {eof, Offset}) when is_integer(Offset) -> + {error, einval}; +position(_Data, _Any) -> + {error, badarg}. + +position_1(#{ position := Desired } = Data, Desired) -> + {ok, Data, Desired}; +position_1(#{ position := Current } = Data, Desired) when Current < Desired -> + BytesToWrite = min(Desired - Current, 4 bsl 20), + case write(Data, <<0:(BytesToWrite)/unit:8>>) of + {ok, NewData} -> position_1(NewData, Desired); + Other -> Other + end; +position_1(#{ position := Current }, Desired) when Current > Desired -> + {error, einval}. + +flush_deflate_state(#{ handle := PrivateFd, zlib := Z }) -> + case ?CALL_FD(PrivateFd, write, [zlib:deflate(Z, [], finish)]) of + ok -> ok; + Other -> Other + end. + +terminate(_Reason, _State, _Data) -> + ok. diff --git a/lib/kernel/src/raw_file_io_delayed.erl b/lib/kernel/src/raw_file_io_delayed.erl new file mode 100644 index 0000000000..d2ad7550a1 --- /dev/null +++ b/lib/kernel/src/raw_file_io_delayed.erl @@ -0,0 +1,320 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2017. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +%% +-module(raw_file_io_delayed). + +-behavior(gen_statem). + +-export([close/1, sync/1, datasync/1, truncate/1, advise/4, allocate/3, + position/2, write/2, pwrite/2, pwrite/3, + read_line/1, read/2, pread/2, pread/3]). + +%% OTP internal. +-export([ipread_s32bu_p32bu/3, sendfile/8]). + +-export([open_layer/3]). + +-export([init/1, callback_mode/0, terminate/3]). +-export([opening/3, opened/3]). + +-include("file_int.hrl"). + +open_layer(Filename, Modes, Options) -> + Secret = make_ref(), + case gen_statem:start(?MODULE, {self(), Secret, Options}, []) of + {ok, Pid} -> + gen_statem:call(Pid, {'$open', Secret, Filename, Modes}, infinity); + Other -> + Other + end. + +callback_mode() -> state_functions. + +init({Owner, Secret, Options}) -> + Monitor = monitor(process, Owner), + Defaults = + #{ owner => Owner, + monitor => Monitor, + secret => Secret, + timer => none, + pid => self(), + buffer => prim_buffer:new(), + delay_size => 64 bsl 10, + delay_time => 2000 }, + Data = fill_delay_values(Defaults, Options), + {ok, opening, Data}. + +fill_delay_values(Data, []) -> + Data; +fill_delay_values(Data, [{delayed_write, Size, Time} | Options]) -> + fill_delay_values(Data#{ delay_size => Size, delay_time => Time }, Options); +fill_delay_values(Data, [_ | Options]) -> + fill_delay_values(Data, Options). + +opening({call, From}, {'$open', Secret, Filename, Modes}, #{ secret := Secret } = Data) -> + case raw_file_io:open(Filename, Modes) of + {ok, PrivateFd} -> + PublicData = maps:with([owner, buffer, delay_size, pid], Data), + PublicFd = #file_descriptor{ module = ?MODULE, data = PublicData }, + + NewData = Data#{ handle => PrivateFd }, + Response = {ok, PublicFd}, + {next_state, opened, NewData, [{reply, From, Response}]}; + Other -> + {stop_and_reply, normal, [{reply, From, Other}]} + end; +opening(_Event, _Contents, _Data) -> + {keep_state_and_data, [postpone]}. + +%% + +opened(info, {'$timed_out', Secret}, #{ secret := Secret } = Data) -> + %% If the user writes something at this exact moment, the flush will fail + %% and the timer won't reset on the next write since the buffer won't be + %% empty (Unless we collided on a flush). We therefore reset the timeout to + %% ensure that data won't sit idle for extended periods of time. + case try_flush_write_buffer(Data) of + busy -> gen_statem:cast(self(), '$reset_timeout'); + ok -> ok + end, + {keep_state, Data#{ timer => none }, []}; + +opened(info, {'DOWN', Monitor, process, _Owner, Reason}, #{ monitor := Monitor } = Data) -> + if + Reason =/= kill -> try_flush_write_buffer(Data); + Reason =:= kill -> ignored + end, + {stop, shutdown}; + +opened(info, _Message, _Data) -> + keep_state_and_data; + +opened({call, {Owner, _Tag} = From}, [close], #{ owner := Owner } = Data) -> + case flush_write_buffer(Data) of + ok -> + #{ handle := PrivateFd } = Data, + Response = ?CALL_FD(PrivateFd, close, []), + {stop_and_reply, normal, [{reply, From, Response}]}; + Other -> + {stop_and_reply, normal, [{reply, From, Other}]} + end; + +opened({call, {Owner, _Tag} = From}, '$wait', #{ owner := Owner }) -> + %% Used in write/2 to synchronize writes on lock conflicts. + {keep_state_and_data, [{reply, From, ok}]}; + +opened({call, {Owner, _Tag} = From}, '$synchronous_flush', #{ owner := Owner } = Data) -> + cancel_flush_timeout(Data), + Response = flush_write_buffer(Data), + {keep_state_and_data, [{reply, From, Response}]}; + +opened({call, {Owner, _Tag} = From}, Command, #{ owner := Owner } = Data) -> + Response = + case flush_write_buffer(Data) of + ok -> dispatch_command(Data, Command); + Other -> Other + end, + {keep_state_and_data, [{reply, From, Response}]}; + +opened({call, _From}, _Command, _Data) -> + %% The client functions filter this out, so we'll crash if the user does + %% anything stupid on purpose. + {shutdown, protocol_violation}; + +opened(cast, '$reset_timeout', #{ delay_time := Timeout, secret := Secret } = Data) -> + cancel_flush_timeout(Data), + Timer = erlang:send_after(Timeout, self(), {'$timed_out', Secret}), + {keep_state, Data#{ timer => Timer }, []}; + +opened(cast, _Message, _Data) -> + {keep_state_and_data, []}. + +dispatch_command(Data, [Function | Args]) -> + #{ handle := Handle } = Data, + Module = Handle#file_descriptor.module, + apply(Module, Function, [Handle | Args]). + +cancel_flush_timeout(#{ timer := none }) -> + ok; +cancel_flush_timeout(#{ timer := Timer }) -> + _ = erlang:cancel_timer(Timer, [{async, true}]), + ok. + +try_flush_write_buffer(#{ buffer := Buffer, handle := PrivateFd }) -> + case prim_buffer:try_lock(Buffer) of + acquired -> + flush_write_buffer_1(Buffer, PrivateFd), + prim_buffer:unlock(Buffer), + ok; + busy -> + busy + end. + +%% This is only safe to use when there is no chance of conflict with the owner +%% process, or in other words, "during synchronous calls outside of the locked +%% section of write/2" +flush_write_buffer(#{ buffer := Buffer, handle := PrivateFd }) -> + acquired = prim_buffer:try_lock(Buffer), + Result = flush_write_buffer_1(Buffer, PrivateFd), + prim_buffer:unlock(Buffer), + Result. + +flush_write_buffer_1(Buffer, PrivateFd) -> + case prim_buffer:size(Buffer) of + Size when Size > 0 -> + ?CALL_FD(PrivateFd, write, [prim_buffer:read_iovec(Buffer, Size)]); + 0 -> + ok + end. + +terminate(_Reason, _State, _Data) -> + ok. + +%% Client functions + +write(Fd, IOData) -> + try + enqueue_write(Fd, erlang:iolist_to_iovec(IOData)) + catch + error:badarg -> {error, badarg} + end. +enqueue_write(_Fd, []) -> + ok; +enqueue_write(Fd, IOVec) -> + %% get_fd_data will reject everyone except the process that opened the Fd, + %% so we can't race with anyone except the wrapper process. + #{ delay_size := DelaySize, + buffer := Buffer, + pid := Pid } = get_fd_data(Fd), + case prim_buffer:try_lock(Buffer) of + acquired -> + %% (The wrapper process will exit without flushing if we're killed + %% while holding the lock). + enqueue_write_locked(Pid, Buffer, DelaySize, IOVec); + busy -> + %% This can only happen while we're processing a timeout in the + %% wrapper process, so we perform a bogus call to get a completion + %% notification before trying again. + gen_statem:call(Pid, '$wait'), + enqueue_write(Fd, IOVec) + end. +enqueue_write_locked(Pid, Buffer, DelaySize, IOVec) -> + %% The synchronous operations (write, forced flush) are safe since we're + %% running on the only process that can fill the buffer; a timeout being + %% processed just before $synchronous_flush will cause the flush to nop, + %% and a timeout sneaking in just before a synchronous write won't do + %% anything since the buffer is guaranteed to be empty at that point. + BufSize = prim_buffer:size(Buffer), + case is_iovec_smaller_than(IOVec, DelaySize - BufSize) of + true when BufSize > 0 -> + prim_buffer:write(Buffer, IOVec), + prim_buffer:unlock(Buffer); + true -> + prim_buffer:write(Buffer, IOVec), + prim_buffer:unlock(Buffer), + gen_statem:cast(Pid, '$reset_timeout'); + false when BufSize > 0 -> + prim_buffer:write(Buffer, IOVec), + prim_buffer:unlock(Buffer), + gen_statem:call(Pid, '$synchronous_flush'); + false -> + prim_buffer:unlock(Buffer), + gen_statem:call(Pid, [write, IOVec]) + end. + +%% iolist_size/1 will always look through the entire list to get a precise +%% amount, which is pretty inefficient since we only need to know whether we've +%% hit the buffer threshold or not. +%% +%% We only handle the binary case since write/2 forcibly translates input to +%% erlang:iovec(). +is_iovec_smaller_than(IOVec, Max) -> + is_iovec_smaller_than_1(IOVec, Max, 0). +is_iovec_smaller_than_1(_IOVec, Max, Acc) when Acc >= Max -> + false; +is_iovec_smaller_than_1([], _Max, _Acc) -> + true; +is_iovec_smaller_than_1([Binary | Rest], Max, Acc) when is_binary(Binary) -> + is_iovec_smaller_than_1(Rest, Max, Acc + byte_size(Binary)). + +close(Fd) -> + wrap_call(Fd, [close]). + +sync(Fd) -> + wrap_call(Fd, [sync]). +datasync(Fd) -> + wrap_call(Fd, [datasync]). + +truncate(Fd) -> + wrap_call(Fd, [truncate]). + +advise(Fd, Offset, Length, Advise) -> + wrap_call(Fd, [advise, Offset, Length, Advise]). +allocate(Fd, Offset, Length) -> + wrap_call(Fd, [allocate, Offset, Length]). + +position(Fd, Mark) -> + wrap_call(Fd, [position, Mark]). + +pwrite(Fd, Offset, IOData) -> + try + CompactedData = erlang:iolist_to_iovec(IOData), + wrap_call(Fd, [pwrite, Offset, CompactedData]) + catch + error:badarg -> {error, badarg} + end. +pwrite(Fd, LocBytes) -> + try + CompactedLocBytes = + [ {Offset, erlang:iolist_to_iovec(IOData)} || + {Offset, IOData} <- LocBytes ], + wrap_call(Fd, [pwrite, CompactedLocBytes]) + catch + error:badarg -> {error, badarg} + end. + +read_line(Fd) -> + wrap_call(Fd, [read_line]). +read(Fd, Size) -> + wrap_call(Fd, [read, Size]). +pread(Fd, Offset, Size) -> + wrap_call(Fd, [pread, Offset, Size]). +pread(Fd, LocNums) -> + wrap_call(Fd, [pread, LocNums]). + +ipread_s32bu_p32bu(Fd, Offset, MaxSize) -> + wrap_call(Fd, [ipread_s32bu_p32bu, Offset, MaxSize]). + +sendfile(_,_,_,_,_,_,_,_) -> + {error, enotsup}. + +wrap_call(Fd, Command) -> + #{ pid := Pid } = get_fd_data(Fd), + try gen_statem:call(Pid, Command, infinity) of + Result -> Result + catch + exit:{noproc, _StackTrace} -> {error, einval} + end. + +get_fd_data(#file_descriptor{ data = Data }) -> + #{ owner := Owner } = Data, + case self() of + Owner -> Data; + _ -> error(not_on_controlling_process) + end. diff --git a/lib/kernel/src/raw_file_io_inflate.erl b/lib/kernel/src/raw_file_io_inflate.erl new file mode 100644 index 0000000000..7e9780310c --- /dev/null +++ b/lib/kernel/src/raw_file_io_inflate.erl @@ -0,0 +1,261 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2017. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +%% +-module(raw_file_io_inflate). + +-behavior(gen_statem). + +-export([init/1, callback_mode/0, terminate/3]). +-export([opening/3, opened_gzip/3, opened_passthrough/3]). + +-include("file_int.hrl"). + +-define(INFLATE_CHUNK_SIZE, (1 bsl 10)). +-define(GZIP_WBITS, (16 + 15)). + +callback_mode() -> state_functions. + +init({Owner, Secret, [compressed]}) -> + Monitor = monitor(process, Owner), + %% We're using the undocumented inflateInit/3 to open the stream in + %% 'reset mode', which resets the inflate state at the end of every stream, + %% allowing us to read concatenated gzip files. + Z = zlib:open(), + ok = zlib:inflateInit(Z, ?GZIP_WBITS, reset), + Data = + #{ owner => Owner, + monitor => Monitor, + secret => Secret, + position => 0, + buffer => prim_buffer:new(), + zlib => Z }, + {ok, opening, Data}. + +%% The old driver fell back to plain reads if the file didn't start with the +%% magic gzip bytes. +choose_decompression_state(PrivateFd) -> + State = + case ?CALL_FD(PrivateFd, read, [2]) of + {ok, <<16#1F, 16#8B>>} -> opened_gzip; + _Other -> opened_passthrough + end, + {ok, 0} = ?CALL_FD(PrivateFd, position, [0]), + State. + +opening({call, From}, {'$open', Secret, Filename, Modes}, #{ secret := Secret } = Data) -> + case raw_file_io:open(Filename, Modes) of + {ok, PrivateFd} -> + NextState = choose_decompression_state(PrivateFd), + NewData = Data#{ handle => PrivateFd }, + {next_state, NextState, NewData, [{reply, From, ok}]}; + Other -> + {stop_and_reply, normal, [{reply, From, Other}]} + end; +opening(_Event, _Contents, _Data) -> + {keep_state_and_data, [postpone]}. + +internal_close(From, Data) -> + #{ handle := PrivateFd } = Data, + Response = ?CALL_FD(PrivateFd, close, []), + {stop_and_reply, normal, [{reply, From, Response}]}. + +opened_passthrough(info, {'DOWN', Monitor, process, _Owner, _Reason}, #{ monitor := Monitor }) -> + {stop, shutdown}; + +opened_passthrough(info, _Message, _Data) -> + keep_state_and_data; + +opened_passthrough({call, {Owner, _Tag} = From}, [close], #{ owner := Owner } = Data) -> + internal_close(From, Data); + +opened_passthrough({call, {Owner, _Tag} = From}, [Method | Args], #{ owner := Owner } = Data) -> + #{ handle := PrivateFd } = Data, + Response = ?CALL_FD(PrivateFd, Method, Args), + {keep_state_and_data, [{reply, From, Response}]}; + +opened_passthrough({call, _From}, _Command, _Data) -> + %% The client functions filter this out, so we'll crash if the user does + %% anything stupid on purpose. + {shutdown, protocol_violation}; + +opened_passthrough(_Event, _Request, _Data) -> + keep_state_and_data. + +%% + +opened_gzip(info, {'DOWN', Monitor, process, _Owner, _Reason}, #{ monitor := Monitor }) -> + {stop, shutdown}; + +opened_gzip(info, _Message, _Data) -> + keep_state_and_data; + +opened_gzip({call, {Owner, _Tag} = From}, [close], #{ owner := Owner } = Data) -> + internal_close(From, Data); + +opened_gzip({call, {Owner, _Tag} = From}, [position, Mark], #{ owner := Owner } = Data) -> + case position(Data, Mark) of + {ok, NewData, Result} -> + Response = {ok, Result}, + {keep_state, NewData, [{reply, From, Response}]}; + Other -> + {keep_state_and_data, [{reply, From, Other}]} + end; + +opened_gzip({call, {Owner, _Tag} = From}, [read, Size], #{ owner := Owner } = Data) -> + case read(Data, Size) of + {ok, NewData, Result} -> + Response = {ok, Result}, + {keep_state, NewData, [{reply, From, Response}]}; + Other -> + {keep_state_and_data, [{reply, From, Other}]} + end; + +opened_gzip({call, {Owner, _Tag} = From}, [read_line], #{ owner := Owner } = Data) -> + case read_line(Data) of + {ok, NewData, Result} -> + Response = {ok, Result}, + {keep_state, NewData, [{reply, From, Response}]}; + Other -> + {keep_state_and_data, [{reply, From, Other}]} + end; + +opened_gzip({call, {Owner, _Tag} = From}, [write, _IOData], #{ owner := Owner }) -> + Response = {error, ebadf}, + {keep_state_and_data, [{reply, From, Response}]}; + +opened_gzip({call, {Owner, _Tag} = From}, _Request, #{ owner := Owner }) -> + Response = {error, enotsup}, + {keep_state_and_data, [{reply, From, Response}]}; + +opened_gzip({call, _From}, _Request, _Data) -> + %% The client functions filter this out, so we'll crash if the user does + %% anything stupid on purpose. + {shutdown, protocol_violation}; + +opened_gzip(_Event, _Request, _Data) -> + keep_state_and_data. + +%% + +read(#{ buffer := Buffer } = Data, Size) -> + try read_1(Data, Buffer, prim_buffer:size(Buffer), Size) of + Result -> Result + catch + error:badarg -> {error, badarg}; + error:_ -> {error, eio} + end. +read_1(Data, Buffer, BufferSize, ReadSize) when BufferSize >= ReadSize -> + #{ position := Position } = Data, + Decompressed = prim_buffer:read(Buffer, ReadSize), + {ok, Data#{ position => (Position + ReadSize) }, Decompressed}; +read_1(Data, Buffer, BufferSize, ReadSize) when BufferSize < ReadSize -> + #{ handle := PrivateFd } = Data, + case ?CALL_FD(PrivateFd, read, [?INFLATE_CHUNK_SIZE]) of + {ok, Compressed} -> + #{ zlib := Z } = Data, + Uncompressed = erlang:iolist_to_iovec(zlib:inflate(Z, Compressed)), + prim_buffer:write(Buffer, Uncompressed), + read_1(Data, Buffer, prim_buffer:size(Buffer), ReadSize); + eof when BufferSize > 0 -> + read_1(Data, Buffer, BufferSize, BufferSize); + Other -> + Other + end. + +read_line(#{ buffer := Buffer } = Data) -> + try read_line_1(Data, Buffer, prim_buffer:find_byte_index(Buffer, $\n)) of + {ok, NewData, Decompressed} -> {ok, NewData, Decompressed}; + Other -> Other + catch + error:badarg -> {error, badarg}; + error:_ -> {error, eio} + end. + +read_line_1(Data, Buffer, not_found) -> + #{ handle := PrivateFd, zlib := Z } = Data, + case ?CALL_FD(PrivateFd, read, [?INFLATE_CHUNK_SIZE]) of + {ok, Compressed} -> + Uncompressed = erlang:iolist_to_iovec(zlib:inflate(Z, Compressed)), + prim_buffer:write(Buffer, Uncompressed), + read_line_1(Data, Buffer, prim_buffer:find_byte_index(Buffer, $\n)); + eof -> + case prim_buffer:size(Buffer) of + Size when Size > 0 -> {ok, prim_buffer:read(Buffer, Size)}; + Size when Size =:= 0 -> eof + end; + Error -> + Error + end; +read_line_1(Data, Buffer, {ok, LFIndex}) -> + %% Translate CRLF into just LF, completely ignoring which encoding is used, + %% but treat the file position as including CR. + #{ position := Position } = Data, + NewData = Data#{ position => (Position + LFIndex + 1) }, + CRIndex = (LFIndex - 1), + TranslatedLine = + case prim_buffer:read(Buffer, LFIndex + 1) of + <<Line:CRIndex/binary, "\r\n">> -> <<Line/binary, "\n">>; + Line -> Line + end, + {ok, NewData, TranslatedLine}. + +%% +%% We support seeking in both directions as long as it isn't relative to EOF. +%% +%% Seeking backwards is extremely inefficient since we have to seek to the very +%% beginning and then decompress up to the desired point. +%% + +position(Data, Mark) when is_atom(Mark) -> + position(Data, {Mark, 0}); +position(Data, Offset) when is_integer(Offset) -> + position(Data, {bof, Offset}); +position(Data, {bof, Offset}) when is_integer(Offset) -> + position_1(Data, Offset); +position(Data, {cur, Offset}) when is_integer(Offset) -> + #{ position := Position } = Data, + position_1(Data, Position + Offset); +position(_Data, {eof, Offset}) when is_integer(Offset) -> + {error, einval}; +position(_Data, _Other) -> + {error, badarg}. + +position_1(_Data, Desired) when Desired < 0 -> + {error, einval}; +position_1(#{ position := Desired } = Data, Desired) -> + {ok, Data, Desired}; +position_1(#{ position := Current } = Data, Desired) when Current < Desired -> + case read(Data, min(Desired - Current, ?INFLATE_CHUNK_SIZE)) of + {ok, NewData, _Data} -> position_1(NewData, Desired); + eof -> {ok, Data, Current}; + Other -> Other + end; +position_1(#{ position := Current } = Data, Desired) when Current > Desired -> + #{ handle := PrivateFd, buffer := Buffer, zlib := Z } = Data, + case ?CALL_FD(PrivateFd, position, [bof]) of + {ok, 0} -> + ok = zlib:inflateReset(Z), + prim_buffer:wipe(Buffer), + position_1(Data#{ position => 0 }, Desired); + Other -> + Other + end. + +terminate(_Reason, _State, _Data) -> + ok. diff --git a/lib/kernel/src/raw_file_io_list.erl b/lib/kernel/src/raw_file_io_list.erl new file mode 100644 index 0000000000..2e16e63f0e --- /dev/null +++ b/lib/kernel/src/raw_file_io_list.erl @@ -0,0 +1,128 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2017. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +%% +-module(raw_file_io_list). + +-export([close/1, sync/1, datasync/1, truncate/1, advise/4, allocate/3, + position/2, write/2, pwrite/2, pwrite/3, + read_line/1, read/2, pread/2, pread/3]). + +%% OTP internal. +-export([ipread_s32bu_p32bu/3, sendfile/8]). + +-export([open_layer/3]). + +-include("file_int.hrl"). + +open_layer(Filename, Modes, [list]) -> + case raw_file_io:open(Filename, [binary | Modes]) of + {ok, PrivateFd} -> {ok, make_public_fd(PrivateFd, Modes)}; + Other -> Other + end. + +%% We can skip wrapping the file if it's write-only since only read operations +%% are affected by list mode. Since raw_file_io fills in all implicit options +%% for us, all we need to do is check whether 'read' is among them. +make_public_fd(PrivateFd, Modes) -> + case lists:member(read, Modes) of + true -> #file_descriptor{ module = ?MODULE, data = PrivateFd }; + false -> PrivateFd + end. + +close(Fd) -> + PrivateFd = Fd#file_descriptor.data, + ?CALL_FD(PrivateFd, close, []). + +sync(Fd) -> + PrivateFd = Fd#file_descriptor.data, + ?CALL_FD(PrivateFd, sync, []). +datasync(Fd) -> + PrivateFd = Fd#file_descriptor.data, + ?CALL_FD(PrivateFd, datasync, []). + +truncate(Fd) -> + PrivateFd = Fd#file_descriptor.data, + ?CALL_FD(PrivateFd, truncate, []). + +advise(Fd, Offset, Length, Advise) -> + PrivateFd = Fd#file_descriptor.data, + ?CALL_FD(PrivateFd, advise, [Offset, Length, Advise]). +allocate(Fd, Offset, Length) -> + PrivateFd = Fd#file_descriptor.data, + ?CALL_FD(PrivateFd, allocate, [Offset, Length]). + +position(Fd, Mark) -> + PrivateFd = Fd#file_descriptor.data, + ?CALL_FD(PrivateFd, position, [Mark]). + +write(Fd, IOData) -> + PrivateFd = Fd#file_descriptor.data, + ?CALL_FD(PrivateFd, write, [IOData]). + +pwrite(Fd, Offset, IOData) -> + PrivateFd = Fd#file_descriptor.data, + ?CALL_FD(PrivateFd, pwrite, [Offset, IOData]). +pwrite(Fd, LocBytes) -> + PrivateFd = Fd#file_descriptor.data, + ?CALL_FD(PrivateFd, pwrite, [LocBytes]). + +read_line(Fd) -> + PrivateFd = Fd#file_descriptor.data, + case ?CALL_FD(PrivateFd, read_line, []) of + {ok, Binary} -> {ok, binary_to_list(Binary)}; + Other -> Other + end. +read(Fd, Size) -> + PrivateFd = Fd#file_descriptor.data, + case ?CALL_FD(PrivateFd, read, [Size]) of + {ok, Binary} -> {ok, binary_to_list(Binary)}; + Other -> Other + end. +pread(Fd, Offset, Size) -> + PrivateFd = Fd#file_descriptor.data, + case ?CALL_FD(PrivateFd, pread, [Offset, Size]) of + {ok, Binary} -> {ok, binary_to_list(Binary)}; + Other -> Other + end. +pread(Fd, LocNums) -> + PrivateFd = Fd#file_descriptor.data, + case ?CALL_FD(PrivateFd, pread, [LocNums]) of + {ok, LocResults} -> + TranslatedResults = + [ case Result of + Result when is_binary(Result) -> binary_to_list(Result); + eof -> eof + end || Result <- LocResults ], + {ok, TranslatedResults}; + Other -> Other + end. + +ipread_s32bu_p32bu(Fd, Offset, MaxSize) -> + PrivateFd = Fd#file_descriptor.data, + case ?CALL_FD(PrivateFd, ipread_s32bu_p32bu, [Offset, MaxSize]) of + {ok, {Size, Pointer, Binary}} when is_binary(Binary) -> + {ok, {Size, Pointer, binary_to_list(Binary)}}; + Other -> + Other + end. + +sendfile(Fd, Dest, Offset, Bytes, ChunkSize, Headers, Trailers, Flags) -> + Args = [Dest, Offset, Bytes, ChunkSize, Headers, Trailers, Flags], + PrivateFd = Fd#file_descriptor.data, + ?CALL_FD(PrivateFd, sendfile, Args). diff --git a/lib/kernel/src/raw_file_io_raw.erl b/lib/kernel/src/raw_file_io_raw.erl new file mode 100644 index 0000000000..9a9fe78eb1 --- /dev/null +++ b/lib/kernel/src/raw_file_io_raw.erl @@ -0,0 +1,25 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2017. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +%% +-module(raw_file_io_raw). + +-export([open_layer/3]). + +open_layer(Filename, Modes, [raw]) -> + prim_file:open(Filename, [raw | Modes]). diff --git a/lib/kernel/test/code_SUITE.erl b/lib/kernel/test/code_SUITE.erl index 569753155f..902196def2 100644 --- a/lib/kernel/test/code_SUITE.erl +++ b/lib/kernel/test/code_SUITE.erl @@ -931,37 +931,34 @@ purge_stacktrace(Config) when is_list(Config) -> code:purge(code_b_test), try code_b_test:call(fun(b) -> ok end, a) catch - error:function_clause -> + error:function_clause:Stacktrace -> code:load_file(code_b_test), - case erlang:get_stacktrace() of + case Stacktrace of [{?MODULE,_,[a],_}, {code_b_test,call,2,_}, {?MODULE,purge_stacktrace,1,_}|_] -> - false = code:purge(code_b_test), - [] = erlang:get_stacktrace() + false = code:purge(code_b_test) end end, try code_b_test:call(nofun, 2) catch - error:function_clause -> + error:function_clause:Stacktrace2 -> code:load_file(code_b_test), - case erlang:get_stacktrace() of + case Stacktrace2 of [{code_b_test,call,[nofun,2],_}, {?MODULE,purge_stacktrace,1,_}|_] -> - false = code:purge(code_b_test), - [] = erlang:get_stacktrace() + false = code:purge(code_b_test) end end, Args = [erlang,error,[badarg]], try code_b_test:call(erlang, error, [badarg,Args]) catch - error:badarg -> + error:badarg:Stacktrace3 -> code:load_file(code_b_test), - case erlang:get_stacktrace() of + case Stacktrace3 of [{code_b_test,call,Args,_}, {?MODULE,purge_stacktrace,1,_}|_] -> - false = code:purge(code_b_test), - [] = erlang:get_stacktrace() + false = code:purge(code_b_test) end end, ok. diff --git a/lib/kernel/test/disk_log_SUITE.erl b/lib/kernel/test/disk_log_SUITE.erl index 12e2521939..0709a6e766 100644 --- a/lib/kernel/test/disk_log_SUITE.erl +++ b/lib/kernel/test/disk_log_SUITE.erl @@ -89,8 +89,6 @@ dist_terminate/1, dist_accessible/1, dist_deadlock/1, dist_open2/1, other_groups/1, - evil/1, - otp_6278/1, otp_10131/1]). -export([head_fun/1, hf/0, lserv/1, @@ -123,7 +121,7 @@ [halt_int, wrap_int, halt_ext, wrap_ext, read_mode, head, notif, new_idx_vsn, reopen, block, unblock, open, close, error, chunk, truncate, many_users, info, change_size, - change_attribute, distribution, evil, otp_6278, otp_10131]). + change_attribute, distribution, otp_6278, otp_10131]). %% These test cases should be skipped if the VxWorks card is %% configured without NFS cache. @@ -149,7 +147,7 @@ all() -> {group, open}, {group, close}, {group, error}, chunk, truncate, many_users, {group, info}, {group, change_size}, change_attribute, - {group, distribution}, evil, otp_6278, otp_10131]. + {group, distribution}, otp_6278, otp_10131]. groups() -> [{halt_int, [], [halt_int_inf, {group, halt_int_sz}]}, @@ -4676,119 +4674,6 @@ other_groups(Conf) when is_list(Conf) -> ok. --define(MAX, ?MAX_FWRITE_CACHE). % as in disk_log_1.erl -%% Evil cases such as closed file descriptor port. -evil(Conf) when is_list(Conf) -> - Dir = ?privdir(Conf), - File = filename:join(Dir, "n.LOG"), - Log = n, - - %% Not a very thorough test. - - ok = setup_evil_filled_cache_wrap(Log, Dir), - {error, {file_error,_,einval}} = disk_log:log(Log, apa), - ok = disk_log:close(Log), - - ok = setup_evil_filled_cache_halt(Log, Dir), - {error, {file_error,_,einval}} = disk_log:truncate(Log, apa), - ok = stop_evil(Log), - - %% White box test. - file:delete(File), - Ports0 = erlang:ports(), - {ok, Log} = disk_log:open([{name,Log},{file,File},{type,halt}, - {size,?MAX+50},{format,external}]), - [Fd] = erlang:ports() -- Ports0, - {B,_} = x_mk_bytes(30), - ok = disk_log:blog(Log, <<0:(?MAX-1)/unit:8>>), - exit(Fd, kill), - {error, {file_error,_,einval}} = disk_log:blog_terms(Log, [B,B]), - ok= disk_log:close(Log), - file:delete(File), - - ok = setup_evil_wrap(Log, Dir), - {error, {file_error,_,einval}} = disk_log:close(Log), - - ok = setup_evil_wrap(Log, Dir), - {error, {file_error,_,einval}} = disk_log:log(Log, apa), - ok = stop_evil(Log), - - ok = setup_evil_halt(Log, Dir), - {error, {file_error,_,einval}} = disk_log:log(Log, apa), - ok = stop_evil(Log), - - ok = setup_evil_wrap(Log, Dir), - {error, {file_error,_,einval}} = disk_log:reopen(Log, apa), - {error, {file_error,_,einval}} = disk_log:reopen(Log, apa), - ok = stop_evil(Log), - - ok = setup_evil_wrap(Log, Dir), - {error, {file_error,_,einval}} = disk_log:reopen(Log, apa), - ok = stop_evil(Log), - - ok = setup_evil_wrap(Log, Dir), - {error, {file_error,_,einval}} = disk_log:inc_wrap_file(Log), - ok = stop_evil(Log), - - ok = setup_evil_wrap(Log, Dir), - {error, {file_error,_,einval}} = disk_log:chunk(Log, start), - ok = stop_evil(Log), - - ok = setup_evil_wrap(Log, Dir), - {error, {file_error,_,einval}} = disk_log:truncate(Log), - ok = stop_evil(Log), - - ok = setup_evil_wrap(Log, Dir), - {error, {file_error,_,einval}} = disk_log:chunk_step(Log, start, 1), - ok = stop_evil(Log), - - io:format("messages: ~p~n", [erlang:process_info(self(), messages)]), - del(File, 2), - file:delete(File), - ok. - -setup_evil_wrap(Log, Dir) -> - setup_evil(Log, [{type,wrap},{size,{100,2}}], Dir). - -setup_evil_halt(Log, Dir) -> - setup_evil(Log, [{type,halt},{size,10000}], Dir). - -setup_evil(Log, Args, Dir) -> - File = filename:join(Dir, lists:concat([Log, ".LOG"])), - file:delete(File), - del(File, 2), - ok = disk_log:start(), - Ports0 = erlang:ports(), - {ok, Log} = disk_log:open([{name,Log},{file,File} | Args]), - [Fd] = erlang:ports() -- Ports0, - exit(Fd, kill), - ok = disk_log:log_terms(n, [<<0:10/unit:8>>]), - timer:sleep(2500), % TIMEOUT in disk_log_1.erl is 2000 - ok. - -stop_evil(Log) -> - {error, _} = disk_log:close(Log), - ok. - -setup_evil_filled_cache_wrap(Log, Dir) -> - setup_evil_filled_cache(Log, [{type,wrap},{size,{?MAX,2}}], Dir). - -setup_evil_filled_cache_halt(Log, Dir) -> - setup_evil_filled_cache(Log, [{type,halt},{size,infinity}], Dir). - -%% The cache is filled, and the file descriptor port gone. -setup_evil_filled_cache(Log, Args, Dir) -> - File = filename:join(Dir, lists:concat([Log, ".LOG"])), - file:delete(File), - del(File, 2), - ok = disk_log:start(), - Ports0 = erlang:ports(), - {ok, Log} = disk_log:open([{name,Log},{file,File} | Args]), - [Fd] = erlang:ports() -- Ports0, - ok = disk_log:log_terms(n, [<<0:?MAX/unit:8>>]), - exit(Fd, kill), - ok. - %% OTP-6278. open/1 creates no status or crash report. otp_6278(Conf) when is_list(Conf) -> Dir = ?privdir(Conf), diff --git a/lib/kernel/test/erl_distribution_SUITE.erl b/lib/kernel/test/erl_distribution_SUITE.erl index bbfaa9d147..073b391288 100644 --- a/lib/kernel/test/erl_distribution_SUITE.erl +++ b/lib/kernel/test/erl_distribution_SUITE.erl @@ -459,9 +459,9 @@ run_remote_test([FuncStr, TestNodeStr | Args]) -> 1 end catch - C:E -> + C:E:S -> io:format("Node ~p got EXCEPTION ~p:~p\nat ~p\n", - [node(), C, E, erlang:get_stacktrace()]), + [node(), C, E, S]), 2 end, io:format("Node ~p doing halt(~p).\n",[node(), Status]), diff --git a/lib/kernel/test/erl_distribution_wb_SUITE.erl b/lib/kernel/test/erl_distribution_wb_SUITE.erl index 03aaee56b7..8256444bdc 100644 --- a/lib/kernel/test/erl_distribution_wb_SUITE.erl +++ b/lib/kernel/test/erl_distribution_wb_SUITE.erl @@ -61,10 +61,13 @@ %% From R9 and forward extended references is compulsory %% From R10 and forward extended pids and ports are compulsory %% From R20 and forward UTF8 atoms are compulsory +%% From R21 and forward NEW_FUN_TAGS is compulsory (no more tuple fallback {fun, ...}) -define(COMPULSORY_DFLAGS, (?DFLAG_EXTENDED_REFERENCES bor ?DFLAG_EXTENDED_PIDS_PORTS bor - ?DFLAG_UTF8_ATOMS)). + ?DFLAG_UTF8_ATOMS bor + ?DFLAG_NEW_FUN_TAGS)). +-define(PASS_THROUGH, $p). -define(shutdown(X), exit(X)). -define(int16(X), [((X) bsr 8) band 16#ff, (X) band 16#ff]). @@ -674,15 +677,16 @@ build_rex_message(Cookie,OurName) -> %% Receive a distribution message recv_message(Socket) -> case gen_tcp:recv(Socket, 0) of + {ok,[]} -> + recv_message(Socket); %% a tick, ignore {ok,Data} -> B0 = list_to_binary(Data), - {_,B1} = erlang:split_binary(B0,1), - Header = binary_to_term(B1), - Siz = byte_size(term_to_binary(Header)), - {_,B2} = erlang:split_binary(B1,Siz), + <<?PASS_THROUGH, B1/binary>> = B0, + {Header,Siz} = binary_to_term(B1,[used]), + <<_:Siz/binary,B2/binary>> = B1, Message = case (catch binary_to_term(B2)) of {'EXIT', _} -> - could_not_digest_message; + {could_not_digest_message,B2}; Other -> Other end, diff --git a/lib/kernel/test/erl_prim_loader_SUITE.erl b/lib/kernel/test/erl_prim_loader_SUITE.erl index b6417210b9..3502a4ad08 100644 --- a/lib/kernel/test/erl_prim_loader_SUITE.erl +++ b/lib/kernel/test/erl_prim_loader_SUITE.erl @@ -33,6 +33,7 @@ primary_archive/1, virtual_dir_in_archive/1, get_modules/1]). +-define(PRIM_FILE, prim_file). %%----------------------------------------------------------------- %% Test suite for erl_prim_loader. (Most code is run during system start/stop.) @@ -461,7 +462,7 @@ primary_archive(Config) when is_list(Config) -> %% Set primary archive ExpectedEbins = [Archive, DictDir ++ "/ebin", DummyDir ++ "/ebin"], io:format("ExpectedEbins: ~p\n", [ExpectedEbins]), - {ok, FileInfo} = prim_file:read_file_info(Archive), + {ok, FileInfo} = ?PRIM_FILE:read_file_info(Archive), {ok, Ebins} = rpc:call(Node, erl_prim_loader, set_primary_archive, [Archive, ArchiveBin, FileInfo, fun escript:parse_file/1]), diff --git a/lib/kernel/test/file_SUITE.erl b/lib/kernel/test/file_SUITE.erl index 119e1f24bb..9a77454432 100644 --- a/lib/kernel/test/file_SUITE.erl +++ b/lib/kernel/test/file_SUITE.erl @@ -39,6 +39,8 @@ -define(FILE_FIN_PER_TESTCASE(Config), Config). -endif. +-define(PRIM_FILE, prim_file). + -module(?FILE_SUITE). -export([all/0, suite/0,groups/0,init_per_suite/1, end_per_suite/1, @@ -97,6 +99,12 @@ -export([unicode_mode/1]). +-export([volume_relative_paths/1]). + +-export([tiny_writes/1, tiny_writes_delayed/1, + large_writes/1, large_writes_delayed/1, + tiny_reads/1, tiny_reads_ahead/1]). + %% Debug exports -export([create_file_slow/2, create_file/2, create_bin/2]). -export([verify_file/2, verify_bin/3]). @@ -107,6 +115,8 @@ -export([disc_free/1, memsize/0]). -include_lib("common_test/include/ct.hrl"). +-include_lib("common_test/include/ct_event.hrl"). + -include_lib("kernel/include/file.hrl"). -define(THROW_ERROR(RES), throw({fail, ?LINE, RES})). @@ -118,13 +128,13 @@ suite() -> all() -> [unicode, altname, read_write_file, {group, dirs}, - {group, files}, delete, rename, names, {group, errors}, - {group, compression}, {group, links}, copy, + {group, files}, delete, rename, names, volume_relative_paths, + {group, errors}, {group, compression}, {group, links}, copy, delayed_write, read_ahead, segment_read, segment_write, ipread, pid2name, interleaved_read_write, otp_5814, otp_10852, large_file, large_write, read_line_1, read_line_2, read_line_3, read_line_4, standard_io, old_io_protocol, - unicode_mode + unicode_mode, {group, bench} ]. groups() -> @@ -154,11 +164,19 @@ groups() -> write_compressed, compress_errors, catenated_gzips, compress_async_crash]}, {links, [], - [make_link, read_link_info_for_non_link, symlinks]}]. + [make_link, read_link_info_for_non_link, symlinks]}, + {bench, [], + [tiny_writes, tiny_writes_delayed, + large_writes, large_writes_delayed, + tiny_reads, tiny_reads_ahead]}]. init_per_group(_GroupName, Config) -> Config. +end_per_group(bench, Config) -> + ScratchDir = proplists:get_value(priv_dir, Config), + file:delete(filename:join(ScratchDir, "benchmark_scratch_file")), + Config; end_per_group(_GroupName, Config) -> Config. @@ -381,11 +399,11 @@ read_write_0(Str, {Func, ReadFun}, Options) -> io:format("~p:~p: ~p ERROR: ~ts vs~n ~w~n - ~p~n", [?MODULE, Line, Func, Str, ReadBytes, Options]), exit({error, ?LINE}); - error:What -> + error:What:Stacktrace -> io:format("~p:??: ~p ERROR: ~p from~n ~w~n ~p~n", [?MODULE, Func, What, Str, Options]), - io:format("\t~p~n", [erlang:get_stacktrace()]), + io:format("\t~p~n", [Stacktrace]), exit({error, ?LINE}) end. @@ -473,7 +491,7 @@ um_check_unicode(_Utf8Bin, {ok, _ListOrBin}, _, _UTF8_) -> um_filename(Bin, Dir, Options) when is_binary(Bin) -> um_filename(binary_to_list(Bin), Dir, Options); um_filename(Str = [_|_], Dir, Options) -> - Name = hd(string:tokens(Str, ":")), + Name = hd(string:lexemes(Str, ":")), Enc = atom_to_list(proplists:get_value(encoding, Options, latin1)), File = case lists:member(binary, Options) of true -> @@ -638,6 +656,10 @@ cur_dir_0(Config) when is_list(Config) -> {ok,NewDirFiles} = ?FILE_MODULE:list_dir("."), true = lists:member(UncommonName,NewDirFiles), + %% Ensure that we get the same result with a trailing slash; the + %% APIs used on Windows will choke on them if passed directly. + {ok,NewDirFiles} = ?FILE_MODULE:list_dir("./"), + %% Delete the directory and return to the old current directory %% and check that the created file isn't there (too!) expect({error, einval}, {error, eacces}, @@ -690,10 +712,15 @@ win_cur_dir_1(_Config) -> %% Get the drive letter from the current directory, %% and try to get current directory for that drive. - [Drive,$:|_] = BaseDir, - {ok,BaseDir} = ?FILE_MODULE:get_cwd([Drive,$:]), + [CurDrive,$:|_] = BaseDir, + {ok,BaseDir} = ?FILE_MODULE:get_cwd([CurDrive,$:]), io:format("BaseDir = ~s\n", [BaseDir]), + %% We should error out on non-existent drives. Any reasonable system will + %% have at least one. + CurDirs = [?FILE_MODULE:get_cwd([Drive,$:]) || Drive <- lists:seq($A, $Z)], + lists:member({error,eaccess}, CurDirs), + %% Unfortunately, there is no way to move away from the %% current drive as we can't use the "subst" command from %% a SSH connection. We can't test any more. @@ -831,7 +858,7 @@ no_untranslatable_names() -> end. start_node(Name, Args) -> - [_,Host] = string:tokens(atom_to_list(node()), "@"), + [_,Host] = string:lexemes(atom_to_list(node()), "@"), ct:log("Trying to start ~w@~s~n", [Name,Host]), case test_server:start_node(Name, peer, [{args,Args}]) of {error,Reason} -> @@ -1019,6 +1046,23 @@ close(Config) when is_list(Config) -> Val = ?FILE_MODULE:close(Fd1), io:format("Second close gave: ~p",[Val]), + %% All operations on a closed raw file should EINVAL, even if they're not + %% supported on the current platform. + {ok,Fd2} = ?FILE_MODULE:open(Name, [read, write, raw]), + ok = ?FILE_MODULE:close(Fd2), + + {error, einval} = ?FILE_MODULE:advise(Fd2, 5, 5, normal), + {error, einval} = ?FILE_MODULE:allocate(Fd2, 5, 5), + {error, einval} = ?FILE_MODULE:close(Fd2), + {error, einval} = ?FILE_MODULE:datasync(Fd2), + {error, einval} = ?FILE_MODULE:position(Fd2, 5), + {error, einval} = ?FILE_MODULE:pread(Fd2, 5, 1), + {error, einval} = ?FILE_MODULE:pwrite(Fd2, 5, "einval please"), + {error, einval} = ?FILE_MODULE:read(Fd2, 1), + {error, einval} = ?FILE_MODULE:sync(Fd2), + {error, einval} = ?FILE_MODULE:truncate(Fd2), + {error, einval} = ?FILE_MODULE:write(Fd2, "einval please"), + [] = flush(), ok. @@ -1132,8 +1176,8 @@ pread_write_test(File, Data) -> end, I = Size + 17, ok = ?FILE_MODULE:pwrite(File, 0, Data), - Res = ?FILE_MODULE:pread(File, 0, I), - {ok, Data} = Res, + {ok, Data} = ?FILE_MODULE:pread(File, 0, I), + {ok, [Data]} = ?FILE_MODULE:pread(File, [{0, I}]), eof = ?FILE_MODULE:pread(File, I, 1), ok = ?FILE_MODULE:pwrite(File, [{0, Data}, {I, Data}]), {ok, [Data, eof, Data]} = @@ -2044,13 +2088,22 @@ names(Config) when is_list(Config) -> ok = ?FILE_MODULE:close(Fd2), {ok,Fd3} = ?FILE_MODULE:open(Name3,read), ok = ?FILE_MODULE:close(Fd3), + + %% Now try the same on raw files. + {ok,Fd4} = ?FILE_MODULE:open(Name2, [read, raw]), + ok = ?FILE_MODULE:close(Fd4), + {ok,Fd4f} = ?FILE_MODULE:open(lists:flatten(Name2), [read, raw]), + ok = ?FILE_MODULE:close(Fd4f), + {ok,Fd5} = ?FILE_MODULE:open(Name3, [read, raw]), + ok = ?FILE_MODULE:close(Fd5), + case length(Name1) > 255 of true -> io:format("Path too long for an atom:\n\n~p\n", [Name1]); false -> Name4 = list_to_atom(Name1), - {ok,Fd4} = ?FILE_MODULE:open(Name4,read), - ok = ?FILE_MODULE:close(Fd4) + {ok,Fd6} = ?FILE_MODULE:open(Name4,read), + ok = ?FILE_MODULE:close(Fd6) end, %% Try some path names @@ -2074,6 +2127,22 @@ names(Config) when is_list(Config) -> [] = flush(), ok. +volume_relative_paths(Config) when is_list(Config) -> + case os:type() of + {win32, _} -> + {ok, [Drive, $: | _]} = file:get_cwd(), + %% Relative to current device root. + {ok, RootInfo} = file:read_file_info([Drive, $:, $/]), + {ok, RootInfo} = file:read_file_info("/"), + %% Relative to current device directory. + {ok, DirContents} = file:list_dir([Drive, $:]), + {ok, DirContents} = file:list_dir("."), + [] = flush(), + ok; + _ -> + {skip, "This test is Windows-specific."} + end. + %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% @@ -2641,8 +2710,8 @@ altname(Config) when is_list(Config) -> {skipped, "Altname not supported on this platform"}; {ok, "LONGAL~1"} -> {ok, "A_FILE~1"} = ?FILE_MODULE:altname(Name), - {ok, "C:/"} = ?FILE_MODULE:altname("C:/"), - {ok, "C:\\"} = ?FILE_MODULE:altname("C:\\"), + {ok, "c:/"} = ?FILE_MODULE:altname("C:/"), + {ok, "c:/"} = ?FILE_MODULE:altname("C:\\"), {error,enoent} = ?FILE_MODULE:altname(NonexName), {ok, "short"} = ?FILE_MODULE:altname(ShortName), ok @@ -2923,20 +2992,22 @@ delayed_write(Config) when is_list(Config) -> %% %% Test caching and normal close of non-raw file {ok, Fd1} = - ?FILE_MODULE:open(File, [write, {delayed_write, Size+1, 2000}]), + ?FILE_MODULE:open(File, [write, {delayed_write, Size+1, 400}]), ok = ?FILE_MODULE:write(Fd1, Data1), - timer:sleep(1000), % Just in case the file system is slow + %% Wait for a reasonable amount of time to check whether the write was + %% practically instantaneous or actually delayed. + timer:sleep(100), {ok, Fd2} = ?FILE_MODULE:open(File, [read]), eof = ?FILE_MODULE:read(Fd2, 1), ok = ?FILE_MODULE:write(Fd1, Data1), % Data flush on size - timer:sleep(1000), % Just in case the file system is slow + timer:sleep(100), {ok, Data1Data1} = ?FILE_MODULE:pread(Fd2, bof, 2*Size+1), ok = ?FILE_MODULE:write(Fd1, Data1), - timer:sleep(3000), % Wait until data flush on timeout + timer:sleep(500), % Wait until data flush on timeout {ok, Data1Data1Data1} = ?FILE_MODULE:pread(Fd2, bof, 3*Size+1), ok = ?FILE_MODULE:write(Fd1, Data1), ok = ?FILE_MODULE:close(Fd1), % Data flush on close - timer:sleep(1000), % Just in case the file system is slow + timer:sleep(100), {ok, Data1Data1Data1Data1} = ?FILE_MODULE:pread(Fd2, bof, 4*Size+1), ok = ?FILE_MODULE:close(Fd2), %% @@ -2970,7 +3041,7 @@ delayed_write(Config) when is_list(Config) -> {'DOWN', Mref1, _, _, _} = Down1a -> ct:fail(Down1a) end, - timer:sleep(1000), % Just in case the file system is slow + timer:sleep(100), % Just in case the file system is slow {ok, Fd3} = ?FILE_MODULE:open(File, [read]), eof = ?FILE_MODULE:read(Fd3, 1), Child1 ! {Parent, continue, normal}, @@ -2980,7 +3051,7 @@ delayed_write(Config) when is_list(Config) -> {'DOWN', Mref1, _, _, _} = Down1b -> ct:fail(Down1b) end, - timer:sleep(1000), % Just in case the file system is slow + timer:sleep(100), % Just in case the file system is slow {ok, Data1} = ?FILE_MODULE:pread(Fd3, bof, Size+1), ok = ?FILE_MODULE:close(Fd3), %% @@ -2993,7 +3064,7 @@ delayed_write(Config) when is_list(Config) -> {'DOWN', Mref2, _, _, _} = Down2a -> ct:fail(Down2a) end, - timer:sleep(1000), % Just in case the file system is slow + timer:sleep(100), % Just in case the file system is slow {ok, Fd4} = ?FILE_MODULE:open(File, [read]), eof = ?FILE_MODULE:read(Fd4, 1), Child2 ! {Parent, continue, kill}, @@ -3003,7 +3074,7 @@ delayed_write(Config) when is_list(Config) -> {'DOWN', Mref2, _, _, _} = Down2b -> ct:fail(Down2b) end, - timer:sleep(1000), % Just in case the file system is slow + timer:sleep(100), % Just in case the file system is slow eof = ?FILE_MODULE:pread(Fd4, bof, 1), ok = ?FILE_MODULE:close(Fd4), %% @@ -3095,6 +3166,16 @@ read_ahead(Config) when is_list(Config) -> Data1Data2Data3 = Data1++Data2++Data3, {ok, Data1Data2Data3} = ?FILE_MODULE:read(Fd5, 3*Size+1), ok = ?FILE_MODULE:close(Fd5), + + %% Ensure that a read that draws from both the buffer and the file won't + %% return anything wonky. + SplitData = << <<(I rem 256)>> || I <- lists:seq(1, 1024) >>, + file:write_file(File, SplitData), + {ok, Fd6} = ?FILE_MODULE:open(File, [raw, read, binary, {read_ahead, 256}]), + {ok, <<1>>} = file:read(Fd6, 1), + <<1, Shifted:512/binary, _Rest/binary>> = SplitData, + {ok, Shifted} = file:read(Fd6, 512), + %% [] = flush(), ok. @@ -3699,6 +3780,83 @@ do_large_write(Name) -> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% Benchmarks +%% +%% Note that we only measure the time it takes to run the isolated file +%% operations and that the actual test runtime can differ significantly, +%% especially on the write side as the files need to be truncated before +%% writing. + +large_writes(Config) when is_list(Config) -> + Modes = [raw, binary], + OpCount = 4096, + Data = <<0:(64 bsl 10)/unit:8>>, + run_write_benchmark(Config, Modes, OpCount, Data). + +large_writes_delayed(Config) when is_list(Config) -> + %% Each write is exactly as large as the delay buffer, causing the writes + %% to pass through each time, giving us a decent idea of how much overhead + %% delayed_write adds. + Modes = [raw, binary, {delayed_write, 64 bsl 10, 2000}], + OpCount = 4096, + Data = <<0:(64 bsl 10)/unit:8>>, + run_write_benchmark(Config, Modes, OpCount, Data). + +tiny_writes(Config) when is_list(Config) -> + Modes = [raw, binary], + OpCount = 512 bsl 10, + Data = <<0>>, + run_write_benchmark(Config, Modes, OpCount, Data). + +tiny_writes_delayed(Config) when is_list(Config) -> + Modes = [raw, binary, {delayed_write, 512 bsl 10, 2000}], + OpCount = 512 bsl 10, + Data = <<0>>, + run_write_benchmark(Config, Modes, OpCount, Data). + +%% The read benchmarks assume that "benchmark_scratch_file" has been filled by +%% the write benchmarks. + +tiny_reads(Config) when is_list(Config) -> + Modes = [raw, binary], + OpCount = 512 bsl 10, + run_read_benchmark(Config, Modes, OpCount, 1). + +tiny_reads_ahead(Config) when is_list(Config) -> + Modes = [raw, binary, {read_ahead, 512 bsl 10}], + OpCount = 512 bsl 10, + run_read_benchmark(Config, Modes, OpCount, 1). + +run_write_benchmark(Config, Modes, OpCount, Data) -> + run_benchmark(Config, [write | Modes], OpCount, fun file:write/2, Data). + +run_read_benchmark(Config, Modes, OpCount, OpSize) -> + run_benchmark(Config, [read | Modes], OpCount, fun file:read/2, OpSize). + +run_benchmark(Config, Modes, OpCount, Fun, Arg) -> + ScratchDir = proplists:get_value(priv_dir, Config), + Path = filename:join(ScratchDir, "benchmark_scratch_file"), + {ok, Fd} = file:open(Path, Modes), + submit_throughput_results(Fun, [Fd, Arg], OpCount). + +submit_throughput_results(Fun, Args, Times) -> + MSecs = measure_repeated_file_op(Fun, Args, Times, millisecond), + IOPS = trunc(Times * (1000 / MSecs)), + ct_event:notify(#event{ name = benchmark_data, data = [{value,IOPS}] }), + {comment, io_lib:format("~p IOPS, ~p ms", [IOPS, trunc(MSecs)])}. + +measure_repeated_file_op(Fun, Args, Times, Unit) -> + Start = os:perf_counter(Unit), + repeated_apply(Fun, Args, Times), + os:perf_counter(Unit) - Start. + +repeated_apply(_F, _Args, Times) when Times =< 0 -> + ok; +repeated_apply(F, Args, Times) -> + erlang:apply(F, Args), + repeated_apply(F, Args, Times - 1). + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% response_analysis(Module, Function, Arguments) -> @@ -3934,7 +4092,7 @@ read_line_create_files(TestData) -> read_line_remove_files(TestData) -> [ file:delete(File) || {_Function,File,_,_} <- TestData ]. -%% read_line with prim_file. +%% read_line with ?PRIM_FILE. read_line_1(Config) when is_list(Config) -> PrivDir = proplists:get_value(priv_dir, Config), All = read_line_testdata(PrivDir), @@ -4103,9 +4261,9 @@ read_line_create7(Filename) -> file:close(F). read_line_all(Filename) -> - {ok,F} = prim_file:open(Filename,[read,binary]), + {ok,F} = ?PRIM_FILE:open(Filename,[read,binary]), X=read_rl_lines(F), - prim_file:close(F), + ?PRIM_FILE:close(F), Bin = list_to_binary([B || {ok,B} <- X]), Bin = re:replace(list_to_binary([element(2,file:read_file(Filename))]), "\r\n","\n",[global,{return,binary}]), @@ -4138,7 +4296,7 @@ read_line_all4(Filename) -> {length(X),Bin}. read_rl_lines(F) -> - case prim_file:read_line(F) of + case ?PRIM_FILE:read_line(F) of eof -> []; {error,X} -> @@ -4158,9 +4316,9 @@ read_rl_lines2(F) -> end. read_line_all_alternating(Filename) -> - {ok,F} = prim_file:open(Filename,[read,binary]), + {ok,F} = ?PRIM_FILE:open(Filename,[read,binary]), X=read_rl_lines(F,true), - prim_file:close(F), + ?PRIM_FILE:close(F), Bin = list_to_binary([B || {ok,B} <- X]), Bin = re:replace(list_to_binary([element(2,file:read_file(Filename))]), "\r\n","\n",[global,{return,binary}]), @@ -4194,8 +4352,8 @@ read_line_all_alternating4(Filename) -> read_rl_lines(F,Alternate) -> case begin case Alternate of - true -> prim_file:read(F,1); - false -> prim_file:read_line(F) + true -> ?PRIM_FILE:read(F,1); + false -> ?PRIM_FILE:read_line(F) end end of eof -> diff --git a/lib/kernel/test/file_name_SUITE.erl b/lib/kernel/test/file_name_SUITE.erl index 899102c908..3afc647081 100644 --- a/lib/kernel/test/file_name_SUITE.erl +++ b/lib/kernel/test/file_name_SUITE.erl @@ -77,6 +77,7 @@ init_per_testcase/2, end_per_testcase/2]). -export([normal/1,icky/1,very_icky/1,normalize/1,home_dir/1]). +-define(PRIM_FILE, prim_file). init_per_testcase(_Func, Config) -> Config. @@ -131,7 +132,7 @@ home_dir(Config) when is_list(Config) -> os:putenv("HOME",NewHome), {"HOME",Save}; _ -> - rm_rf(prim_file,NewHome), + rm_rf(?PRIM_FILE,NewHome), throw(unsupported_os) end, try @@ -145,7 +146,7 @@ home_dir(Config) when is_list(Config) -> _ -> os:putenv(SaveOldName,SaveOldValue) end, - rm_rf(prim_file,NewHome) + rm_rf(?PRIM_FILE,NewHome) end catch throw:need_unicode_mode -> @@ -190,7 +191,7 @@ normal(Config) when is_list(Config) -> try Priv = proplists:get_value(priv_dir, Config), file:set_cwd(Priv), - ok = check_normal(prim_file), + ok = check_normal(?PRIM_FILE), ok = check_normal(file), %% If all is good, delete dir again (avoid hanging dir on windows) rm_rf(file,"normal_dir"), @@ -210,7 +211,7 @@ icky(Config) when is_list(Config) -> try Priv = proplists:get_value(priv_dir, Config), file:set_cwd(Priv), - ok = check_icky(prim_file), + ok = check_icky(?PRIM_FILE), ok = check_icky(file), %% If all is good, delete dir again (avoid hanging dir on windows) rm_rf(file,"icky_dir"), @@ -229,7 +230,7 @@ very_icky(Config) when is_list(Config) -> try Priv = proplists:get_value(priv_dir, Config), file:set_cwd(Priv), - case check_very_icky(prim_file) of + case check_very_icky(?PRIM_FILE) of need_unicode_mode -> {skipped,"VM needs to be started in Unicode filename mode"}; ok -> @@ -292,17 +293,14 @@ check_normal(Mod) -> ok end, [ begin - {ok, FD} = Mod:open(Name,[read]), - {ok, Content} = Mod:read(FD,1024), - ok = file:close(FD) - end || {regular,Name,Content} <- NormalDir ], - [ begin {ok, FD} = Mod:open(Name,[read,binary]), BC = list_to_binary(Content), {ok, BC} = Mod:read(FD,1024), ok = file:close(FD) end || {regular,Name,Content} <- NormalDir ], + {error, badarg} = Mod:rename("fil1\0tmp_fil2","tmp_fil1"), Mod:rename("fil1","tmp_fil1"), + {error, badarg} = Mod:read_file("tmp_fil1\0.txt"), {ok, <<"fil1">>} = Mod:read_file("tmp_fil1"), {error,enoent} = Mod:read_file("fil1"), Mod:rename("tmp_fil1","fil1"), @@ -410,11 +408,6 @@ check_icky(Mod) -> ok end, [ begin - {ok, FD} = Mod:open(Name,[read]), - {ok, Content} = Mod:read(FD,1024), - ok = file:close(FD) - end || {regular,Name,Content} <- IckyDir ], - [ begin {ok, FD} = Mod:open(Name,[read,binary]), BC = list_to_binary([Content]), {ok, BC} = Mod:read(FD,1024), @@ -519,11 +512,6 @@ check_very_icky(Mod) -> ok end, [ begin - {ok, FD} = Mod:open(Name,[read]), - {ok, Content} = Mod:read(FD,1024), - ok = file:close(FD) - end || {regular,Name,Content} <- VeryIckyDir ], - [ begin {ok, FD} = Mod:open(Name,[read,binary]), BC = list_to_binary([Content]), {ok, BC} = Mod:read(FD,1024), diff --git a/lib/kernel/test/gen_sctp_SUITE.erl b/lib/kernel/test/gen_sctp_SUITE.erl index 620ab235a0..9dde00652c 100644 --- a/lib/kernel/test/gen_sctp_SUITE.erl +++ b/lib/kernel/test/gen_sctp_SUITE.erl @@ -1038,8 +1038,7 @@ do_from_other_process(Fun) -> Result -> Parent ! {Ref,Result} catch - Class:Reason -> - Stacktrace = erlang:get_stacktrace(), + Class:Reason:Stacktrace -> Parent ! {Ref,Class,Reason,Stacktrace} end end), @@ -1617,8 +1616,7 @@ s_start(Socket, Timeout, Parent) -> try s_loop(Socket, Timeout, Parent, Handler, gb_trees:empty()) catch - Class:Reason -> - Stacktrace = erlang:get_stacktrace(), + Class:Reason:Stacktrace -> io:format(?MODULE_STRING":socket exception ~w:~w at~n" "~p.~n", [Class,Reason,Stacktrace]), erlang:raise(Class, Reason, Stacktrace) diff --git a/lib/kernel/test/gen_tcp_api_SUITE.erl b/lib/kernel/test/gen_tcp_api_SUITE.erl index 12d22519ce..0fe44e8a88 100644 --- a/lib/kernel/test/gen_tcp_api_SUITE.erl +++ b/lib/kernel/test/gen_tcp_api_SUITE.erl @@ -605,9 +605,9 @@ ok({ok,V}) -> V; ok(NotOk) -> try throw(not_ok) catch - Thrown -> + throw:Thrown:Stacktrace -> erlang:raise( - error, {Thrown, NotOk}, tl(erlang:get_stacktrace())) + error, {Thrown, NotOk}, tl(Stacktrace)) end. get_localaddr() -> diff --git a/lib/kernel/test/gen_tcp_misc_SUITE.erl b/lib/kernel/test/gen_tcp_misc_SUITE.erl index 331864b5de..e47023d201 100644 --- a/lib/kernel/test/gen_tcp_misc_SUITE.erl +++ b/lib/kernel/test/gen_tcp_misc_SUITE.erl @@ -1572,52 +1572,56 @@ fill_sendq(Config) when is_list(Config) -> Master = self(), Server = spawn_link(fun () -> - {ok,L} = gen_tcp:listen - (0, [{active,false},binary, - {reuseaddr,true},{packet,0}]), + {ok,L} = gen_tcp:listen(0, [{active,false},binary, + {reuseaddr,true},{packet,0}]), {ok,Port} = inet:port(L), Master ! {self(),client, fill_sendq_client(Port, Master)}, fill_sendq_srv(L, Master) end), io:format("~p Server~n", [Server]), - receive {Server,client,Client} -> - io:format("~p Client~n", [Client]), - receive {Server,reader,Reader} -> - io:format("~p Reader~n", [Reader]), - fill_sendq_loop(Server, Client, Reader) + receive + {Server,client,Client} -> + io:format("~p Client~n", [Client]), + receive + {Server,reader,Reader} -> + io:format("~p Reader~n", [Reader]), + fill_sendq_loop(Server, Client, Reader) end end. fill_sendq_loop(Server, Client, Reader) -> %% Master %% - receive {Server,send} -> + receive + {Server,send} -> fill_sendq_loop(Server, Client, Reader) after 2000 -> %% Send queue full, sender blocked -> close client. io:format("Send timeout, closing Client...~n", []), Client ! {self(),close}, - receive {Server,[{error,closed}]} -> - io:format("Got server closed.~n"), - receive {Reader,[{error,closed}]} -> - io:format - ("Got reader closed.~n"), - ok - after 3000 -> - ct:fail({timeout,{closed,reader}}) - end; - {Reader,[{error,closed}]} -> - io:format("Got reader closed.~n"), - receive {Server,[{error,closed}]} -> - io:format("Got server closed~n"), - ok - after 3000 -> - ct:fail({timeout,{closed,server}}) - end - after 3000 -> - ct:fail({timeout,{closed,[server,reader]}}) - end + receive + {Server,[{error,closed}]} -> + io:format("Got server closed.~n"), + receive + {Reader,[{error,closed}]} -> + io:format("Got reader closed.~n"), + ok + after 3000 -> + ct:fail({timeout,{closed,reader}}) + end; + {Reader,[{error,closed}]} -> + io:format("Got reader closed.~n"), + receive + {Server,[{error,closed}]} -> + io:format("Got server closed~n"), + ok + after 3000 -> + ct:fail({timeout,{closed,server}}) + end + after 3000 -> + ct:fail({timeout,{closed,[server,reader]}}) + end end. fill_sendq_srv(L, Master) -> diff --git a/lib/kernel/test/gen_udp_SUITE.erl b/lib/kernel/test/gen_udp_SUITE.erl index aa616d43d6..6a50239c2a 100644 --- a/lib/kernel/test/gen_udp_SUITE.erl +++ b/lib/kernel/test/gen_udp_SUITE.erl @@ -288,58 +288,56 @@ bad_address(Config) when is_list(Config) -> %% %% Starts a slave node that on command sends a bunch of messages %% to our UDP port. The receiving process just receives and -%% ignores the incoming messages, but counts them. -%% A tracing process traces the receiving process for -%% 'receive' and scheduling events. From the trace, -%% message contents is verified; and, how many messages -%% are received per in/out scheduling, which should be -%% the same as the read_packets parameter. -%% -%% What happens on the SMP emulator remains to be seen... -%% +%% ignores the incoming messages. +%% A tracing process traces the receiving port for +%% 'send' and scheduling events. From the trace, +%% how many messages are received per in/out scheduling, +%% which should never be more than the read_packet parameter. %% OTP-6249 UDP option for number of packet reads. read_packets(Config) when is_list(Config) -> - case erlang:system_info(smp_support) of - false -> - read_packets_1(); - true -> - %% We would need some new sort of tracing to test this - %% option reliably in an SMP emulator. - {skip,"SMP emulator"} - end. - -read_packets_1() -> N1 = 5, - N2 = 7, + N2 = 1, + Msgs = 30000, {ok,R} = gen_udp:open(0, [{read_packets,N1}]), {ok,RP} = inet:port(R), {ok,Node} = start_node(gen_udp_SUITE_read_packets), Die = make_ref(), - Loop = erlang:spawn_link(fun () -> infinite_loop(Die) end), %% - Msgs1 = [erlang:integer_to_list(M) || M <- lists:seq(1, N1*3)], - [V1|_] = read_packets_test(R, RP, Msgs1, Node), + {V1, Trace1} = read_packets_test(R, RP, Msgs, Node), {ok,[{read_packets,N1}]} = inet:getopts(R, [read_packets]), %% ok = inet:setopts(R, [{read_packets,N2}]), - Msgs2 = [erlang:integer_to_list(M) || M <- lists:seq(1, N2*3)], - [V2|_] = read_packets_test(R, RP, Msgs2, Node), + {V2, Trace2} = read_packets_test(R, RP, Msgs, Node), {ok,[{read_packets,N2}]} = inet:getopts(R, [read_packets]), %% stop_node(Node), - Mref = erlang:monitor(process, Loop), - Loop ! Die, - receive - {'DOWN',Mref,_,_, normal} -> - case {V1,V2} of - {N1,N2} -> - ok; - _ when V1 =/= N1, V2 =/= N2 -> - ok - end + ct:log("N1=~p, V1=~p vs N2=~p, V2=~p",[N1,V1,N2,V2]), + + dump_terms(Config, "trace1.terms", Trace2), + dump_terms(Config, "trace2.terms", Trace2), + + %% Because of the inherit racy-ness of the feature it is + %% hard to test that it behaves correctly. + %% Right now (OTP 21) a port task takes 5% of the + %% allotted port task reductions to execute, so + %% the max number of executions a port is allowed to + %% do before being re-scheduled is N * 20 + + if + V1 > (N1 * 20) -> + ct:fail("Got ~p msgs, max was ~p", [V1, N1]); + V2 > (N2 * 20) -> + ct:fail("Got ~p msgs, max was ~p", [V2, N2]); + true -> + ok end. +dump_terms(Config, Name, Terms) -> + FName = filename:join(proplists:get_value(priv_dir, Config),Name), + file:write_file(FName, term_to_binary(Terms)), + ct:log("Logged terms to ~s",[FName]). + infinite_loop(Die) -> receive Die -> @@ -350,7 +348,6 @@ infinite_loop(Die) -> end. read_packets_test(R, RP, Msgs, Node) -> - Len = length(Msgs), Receiver = self(), Tracer = spawn_link( @@ -375,24 +372,24 @@ read_packets_test(R, RP, Msgs, Node) -> [link,{priority,high}]), receive {Sender,{port,SP}} -> - erlang:trace(self(), true, - [running,'receive',{tracer,Tracer}]), + erlang:trace(R, true, + [running_ports,'send',{tracer,Tracer}]), erlang:yield(), Sender ! {Receiver,go}, - read_packets_recv(Len), - erlang:trace(self(), false, [all]), + read_packets_recv(Msgs), + erlang:trace(R, false, [all]), Tracer ! {Receiver,get_trace}, receive {Tracer,{trace,Trace}} -> - read_packets_verify(R, SP, Msgs, Trace) + {read_packets_verify(R, SP, Trace), Trace} end end. -read_packets_send(S, RP, [Msg|Msgs]) -> - ok = gen_udp:send(S, localhost, RP, Msg), - read_packets_send(S, RP, Msgs); -read_packets_send(_S, _RP, []) -> - ok. +read_packets_send(_S, _RP, 0) -> + ok; +read_packets_send(S, RP, Msgs) -> + ok = gen_udp:send(S, localhost, RP, "UDP FLOOOOOOD"), + read_packets_send(S, RP, Msgs - 1). read_packets_recv(0) -> ok; @@ -404,23 +401,24 @@ read_packets_recv(N) -> timeout end. -read_packets_verify(R, SP, Msg, Trace) -> - lists:reverse( - lists:sort(read_packets_verify(R, SP, Msg, Trace, 0))). - -read_packets_verify(R, SP, Msgs, [{trace,Self,OutIn,_}|Trace], M) - when Self =:= self(), OutIn =:= out; - Self =:= self(), OutIn =:= in -> - push(M, read_packets_verify(R, SP, Msgs, Trace, 0)); -read_packets_verify(R, SP, [Msg|Msgs], - [{trace,Self,'receive',{udp,R,{127,0,0,1},SP,Msg}} - |Trace], M) +read_packets_verify(R, SP, Trace) -> + [Max | _] = Pkts = lists:reverse(lists:sort(read_packets_verify(R, SP, Trace, 0))), + ct:pal("~p",[lists:sublist(Pkts,10)]), + Max. + +read_packets_verify(R, SP, [{trace,R,OutIn,_}|Trace], M) + when OutIn =:= out; OutIn =:= in -> + push(M, read_packets_verify(R, SP, Trace, 0)); +read_packets_verify(R, SP, [{trace, R,'receive',timeout}|Trace], M) -> + push(M, read_packets_verify(R, SP, Trace, 0)); +read_packets_verify(R, SP, + [{trace,R,'send',{udp,R,{127,0,0,1},SP,_Msg}, Self} | Trace], M) when Self =:= self() -> - read_packets_verify(R, SP, Msgs, Trace, M+1); -read_packets_verify(_R, _SP, [], [], M) -> + read_packets_verify(R, SP, Trace, M+1); +read_packets_verify(_R, _SP, [], M) -> push(M, []); -read_packets_verify(_R, _SP, Msgs, Trace, M) -> - ct:fail({read_packets_verify,mismatch,Msgs,Trace,M}). +read_packets_verify(_R, _SP, Trace, M) -> + ct:fail({read_packets_verify,mismatch,Trace,M}). push(0, Vs) -> Vs; @@ -757,9 +755,9 @@ ok({ok,V}) -> V; ok(NotOk) -> try throw(not_ok) catch - Thrown -> + throw:Thrown:Stacktrace -> erlang:raise( - error, {Thrown, NotOk}, tl(erlang:get_stacktrace())) + error, {Thrown, NotOk}, tl(Stacktrace)) end. diff --git a/lib/kernel/test/inet_res_SUITE.erl b/lib/kernel/test/inet_res_SUITE.erl index 6691ad9c06..2a5b8d0044 100644 --- a/lib/kernel/test/inet_res_SUITE.erl +++ b/lib/kernel/test/inet_res_SUITE.erl @@ -217,10 +217,10 @@ proxy_start(TC, {NS,P}) -> spawn_link( fun () -> try proxy_start(TC, NS, P, Parent, Tag) - catch C:X -> + catch C:X:Stacktrace -> io:format( "~w: ~w:~p ~p~n", - [self(),C,X,erlang:get_stacktrace()]) + [self(),C,X,Stacktrace]) end end), receive {started,Tag,Port} -> diff --git a/lib/kernel/test/kernel_SUITE.erl b/lib/kernel/test/kernel_SUITE.erl index da56359294..7898988dbe 100644 --- a/lib/kernel/test/kernel_SUITE.erl +++ b/lib/kernel/test/kernel_SUITE.erl @@ -30,14 +30,14 @@ -export([init_per_testcase/2, end_per_testcase/2]). %% Test cases must be exported. --export([app_test/1, appup_test/1]). +-export([app_test/1, appup_test/1, refc/1]). suite() -> [{ct_hooks,[ts_install_cth]}, {timetrap,{minutes,2}}]. all() -> - [app_test, appup_test]. + [app_test, appup_test, refc]. groups() -> []. @@ -163,3 +163,68 @@ check_appup([Vsn|Vsns],Instrs,Expected) -> end; check_appup([],_,_) -> ok. + +%%% Check that refc module handles the counters as expected +refc(_Config) -> + Enable = fun(Enable) -> erlang:system_flag(scheduler_wall_time, Enable) end, + IsOn = fun() -> undefined /= erlang:statistics(scheduler_wall_time) end, + Tester = self(), + Loop = fun Loop() -> + receive + die -> normal; + {apply, Bool} -> + Res = Enable(Bool), + Tester ! {self(), Res}, + Loop() + end + end, + + %% Counter should be 0 + false = Enable(false), + + false = Enable(true), + true = Enable(true), + true = Enable(false), + true = Enable(false), + + %% Counter should be 0 + false = IsOn(), + + P1 = spawn_link(Loop), + P1 ! {apply, true}, + receive {P1, R1} -> false = R1 end, + + %% P1 has turned it on counter should be one + true = IsOn(), + true = Enable(true), + true = Enable(false), + true = IsOn(), + + P1 ! {apply, false}, + receive {P1, R2} -> true = R2 end, + false = IsOn(), + + P1 ! {apply, true}, + receive {P1, R3} -> false = R3 end, + true = IsOn(), + true = Enable(false), + + + P1 ! die, + timer:sleep(100), + false = IsOn(), + false = Enable(false), + + P2 = spawn_link(Loop), + P2 ! {apply, true}, + receive {P2, R4} -> false = R4 end, + true = IsOn(), + P2 ! {apply, true}, + receive {P2, R5} -> true = R5 end, + true = IsOn(), + + P2 ! die, + timer:sleep(100), + false = IsOn(), + + ok. diff --git a/lib/kernel/test/kernel_bench.spec b/lib/kernel/test/kernel_bench.spec index 8de60dae31..4de133f21b 100644 --- a/lib/kernel/test/kernel_bench.spec +++ b/lib/kernel/test/kernel_bench.spec @@ -1 +1,2 @@ {groups,"../kernel_test",zlib_SUITE,[bench]}. +{groups,"../kernel_test",file_SUITE,[bench]}. diff --git a/lib/kernel/test/os_SUITE.erl b/lib/kernel/test/os_SUITE.erl index 079b9790f6..4369b1b0f9 100644 --- a/lib/kernel/test/os_SUITE.erl +++ b/lib/kernel/test/os_SUITE.erl @@ -22,7 +22,8 @@ -export([all/0, suite/0,groups/0,init_per_suite/1, end_per_suite/1, init_per_group/2,end_per_group/2, init_per_testcase/2,end_per_testcase/2]). --export([space_in_cwd/1, quoting/1, cmd_unicode/1, space_in_name/1, bad_command/1, +-export([space_in_cwd/1, quoting/1, cmd_unicode/1, + null_in_command/1, space_in_name/1, bad_command/1, find_executable/1, unix_comment_in_command/1, deep_list_command/1, large_output_command/1, background_command/0, background_command/1, message_leak/1, close_stdin/0, close_stdin/1, max_size_command/1, @@ -35,7 +36,8 @@ suite() -> {timetrap,{minutes,1}}]. all() -> - [space_in_cwd, quoting, cmd_unicode, space_in_name, bad_command, + [space_in_cwd, quoting, cmd_unicode, null_in_command, + space_in_name, bad_command, find_executable, unix_comment_in_command, deep_list_command, large_output_command, background_command, message_leak, close_stdin, max_size_command, perf_counter_api]. @@ -126,6 +128,14 @@ cmd_unicode(Config) when is_list(Config) -> [] = receive_all(), ok. +null_in_command(Config) -> + {Ok, Error} = case os:type() of + {win32,_} -> {"dir", "di\0r"}; + _ -> {"ls", "l\0s"} + end, + true = is_list(try os:cmd(Ok) catch Class0:_ -> Class0 end), + error = try os:cmd(Error) catch Class1:_ -> Class1 end, + ok. %% Test that program with a space in its name can be executed. space_in_name(Config) when is_list(Config) -> diff --git a/lib/kernel/test/prim_file_SUITE.erl b/lib/kernel/test/prim_file_SUITE.erl index e88d42788f..ab62f4dc34 100644 --- a/lib/kernel/test/prim_file_SUITE.erl +++ b/lib/kernel/test/prim_file_SUITE.erl @@ -21,38 +21,23 @@ -export([all/0, suite/0,groups/0,init_per_suite/1, end_per_suite/1, init_per_group/2,end_per_group/2, init_per_testcase/2, end_per_testcase/2, read_write_file/1, free_memory/0]). --export([cur_dir_0a/1, cur_dir_0b/1, - cur_dir_1a/1, cur_dir_1b/1, - make_del_dir_a/1, make_del_dir_b/1, - pos1/1, pos2/1]). --export([close/1, - delete_a/1, delete_b/1]). --export([ open1/1, modes/1]). --export([ - file_info_basic_file_a/1, file_info_basic_file_b/1, - file_info_basic_directory_a/1, file_info_basic_directory_b/1, - file_info_bad_a/1, file_info_bad_b/1, - file_info_times_a/1, file_info_times_b/1, - file_write_file_info_a/1, file_write_file_info_b/1, - file_read_file_info_opts/1, file_write_file_info_opts/1, - file_write_read_file_info_opts/1 - ]). --export([rename_a/1, rename_b/1, - access/1, truncate/1, datasync/1, sync/1, +-export([cur_dir_0/1, cur_dir_1/1, + make_del_dir/1, pos1/1, pos2/1]). +-export([close/1, delete/1]). +-export([open1/1, modes/1]). +-export([file_info_basic_file/1, file_info_basic_directory/1, file_info_bad/1, + file_info_times/1, file_write_file_info/1, + file_read_file_info_opts/1, file_write_file_info_opts/1, + file_write_read_file_info_opts/1]). +-export([rename/1, access/1, truncate/1, datasync/1, sync/1, read_write/1, pread_write/1, append/1, exclusive/1]). --export([ e_delete/1, e_rename/1, e_make_dir/1, e_del_dir/1]). +-export([e_delete/1, e_rename/1, e_make_dir/1, e_del_dir/1]). --export([ read_not_really_compressed/1, - read_compressed/1, write_compressed/1, - compress_errors/1]). - --export([ - make_link_a/1, make_link_b/1, - read_link_info_for_non_link/1, - symlinks_a/1, symlinks_b/1, - list_dir_limit/1, - list_dir_error/1, - list_dir/1]). +-export([make_link/1, read_link_info_for_non_link/1, + symlinks/1, + list_dir_limit/1, + list_dir_error/1, + list_dir/1]). -export([advise/1]). -export([large_write/1]). @@ -67,29 +52,16 @@ -define(PRIM_FILE, prim_file). -%% Calls ?PRIM_FILE:F with arguments A and an optional handle H -%% as first argument, unless the handle is [], i.e no handle. -%% This is a macro to give the compiler and thereby -%% the cross reference tool the possibility to interprete -%% the call, since M, F, A (or [H | A]) can all be known at -%% compile time. --define(PRIM_FILE_call(F, H, A), - case H of - [] -> apply(?PRIM_FILE, F, A); - _ -> apply(?PRIM_FILE, F, [H | A]) - end). - suite() -> []. all() -> [read_write_file, {group, dirs}, {group, files}, - delete_a, delete_b, rename_a, rename_b, {group, errors}, - {group, compression}, {group, links}, list_dir_limit, list_dir]. + delete, rename, {group, errors}, {group, links}, + list_dir_limit, list_dir]. groups() -> [{dirs, [], - [make_del_dir_a, make_del_dir_b, cur_dir_0a, cur_dir_0b, - cur_dir_1a, cur_dir_1b]}, + [make_del_dir, cur_dir_0, cur_dir_1]}, {files, [], [{group, open}, {group, pos}, {group, file_info}, truncate, sync, datasync, advise, large_write, allocate]}, @@ -98,22 +70,14 @@ groups() -> append, exclusive]}, {pos, [], [pos1, pos2]}, {file_info, [], - [file_info_basic_file_a, file_info_basic_file_b, - file_info_basic_directory_a, - file_info_basic_directory_b, file_info_bad_a, - file_info_bad_b, file_info_times_a, file_info_times_b, - file_write_file_info_a, file_write_file_info_b, - file_read_file_info_opts, file_write_file_info_opts, - file_write_read_file_info_opts + [file_info_basic_file,file_info_basic_directory, file_info_bad, + file_info_times, file_write_file_info, file_read_file_info_opts, + file_write_file_info_opts, file_write_read_file_info_opts ]}, {errors, [], [e_delete, e_rename, e_make_dir, e_del_dir]}, - {compression, [], - [read_compressed, read_not_really_compressed, - write_compressed, compress_errors]}, {links, [], - [make_link_a, make_link_b, read_link_info_for_non_link, - symlinks_a, symlinks_b, list_dir_error]}]. + [make_link, read_link_info_for_non_link, symlinks, list_dir_error]}]. init_per_testcase(large_write, Config) -> {ok, Started} = application:ensure_all_started(os_mon), @@ -246,39 +210,27 @@ read_write_file(Config) when is_list(Config) -> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - -make_del_dir_a(Config) when is_list(Config) -> - make_del_dir(Config, [], "_a"). - -make_del_dir_b(Config) when is_list(Config) -> - {ok, Handle} = ?PRIM_FILE:start(), - Result = make_del_dir(Config, Handle, "_b"), - ok = ?PRIM_FILE:stop(Handle), - %% Just to make sure the state of the server makes a difference - {error, einval} = ?PRIM_FILE_call(get_cwd, Handle, []), - Result. - -make_del_dir(Config, Handle, Suffix) -> +make_del_dir(Config) when is_list(Config) -> RootDir = proplists:get_value(priv_dir,Config), NewDir = filename:join(RootDir, atom_to_list(?MODULE) - ++"_mk-dir"++Suffix), - ok = ?PRIM_FILE_call(make_dir, Handle, [NewDir]), - {error, eexist} = ?PRIM_FILE_call(make_dir, Handle, [NewDir]), - ok = ?PRIM_FILE_call(del_dir, Handle, [NewDir]), - {error, enoent} = ?PRIM_FILE_call(del_dir, Handle, [NewDir]), + ++"_mk-dir"), + ok = ?PRIM_FILE:make_dir(NewDir), + {error, eexist} = ?PRIM_FILE:make_dir(NewDir), + ok = ?PRIM_FILE:del_dir(NewDir), + {error, enoent} = ?PRIM_FILE:del_dir(NewDir), %% Make sure we are not in a directory directly under test_server %% as that would result in eacces errors when trying to delete '..', %% because there are processes having that directory as current. - ok = ?PRIM_FILE_call(make_dir, Handle, [NewDir]), - {ok, CurrentDir} = ?PRIM_FILE_call(get_cwd, Handle, []), + ok = ?PRIM_FILE:make_dir(NewDir), + {ok, CurrentDir} = ?PRIM_FILE:get_cwd(), case {os:type(), length(NewDir) >= 260 } of {{win32,_}, true} -> io:format("Skip set_cwd for windows path longer than 260 (MAX_PATH)\n", []), io:format("\nNewDir = ~p\n", [NewDir]); _ -> - ok = ?PRIM_FILE_call(set_cwd, Handle, [NewDir]) + ok = ?PRIM_FILE:set_cwd(NewDir) end, try %% Check that we get an error when trying to create... @@ -286,14 +238,14 @@ make_del_dir(Config, Handle, Suffix) -> NewDir2 = filename:join(RootDir, atom_to_list(?MODULE) ++"_mk-dir-noexist/foo"), - {error, enoent} = ?PRIM_FILE_call(make_dir, Handle, [NewDir2]), + {error, enoent} = ?PRIM_FILE:make_dir(NewDir2), %% a nameless directory - {error, enoent} = ?PRIM_FILE_call(make_dir, Handle, [""]), + {error, enoent} = ?PRIM_FILE:make_dir(""), %% a directory with illegal name - {error, badarg} = ?PRIM_FILE_call(make_dir, Handle, ['mk-dir']), + {error, badarg} = ?PRIM_FILE:make_dir('mk-dir'), %% a directory with illegal name, even if it's a (bad) list - {error, badarg} = ?PRIM_FILE_call(make_dir, Handle, [[1,2,3,{}]]), + {error, badarg} = ?PRIM_FILE:make_dir([1,2,3,{}]), %% Maybe this isn't an error, exactly, but worth mentioning anyway: %% ok = ?PRIM_FILE:make_dir([$f,$o,$o,0,$b,$a,$r])), @@ -306,125 +258,101 @@ make_del_dir(Config, Handle, Suffix) -> %% Try deleting some bad directories %% Deleting the parent directory to the current, sounds dangerous, huh? %% Don't worry ;-) the parent directory should never be empty, right? - case ?PRIM_FILE_call(del_dir, Handle, [".."]) of + case ?PRIM_FILE:del_dir("..") of {error, eexist} -> ok; {error, eacces} -> ok; %OpenBSD {error, einval} -> ok %FreeBSD end, - {error, enoent} = ?PRIM_FILE_call(del_dir, Handle, [""]), - {error, badarg} = ?PRIM_FILE_call(del_dir, Handle, [[3,2,1,{}]]) + {error, enoent} = ?PRIM_FILE:del_dir(""), + {error, badarg} = ?PRIM_FILE:del_dir([3,2,1,{}]) after - ok = ?PRIM_FILE_call(set_cwd, Handle, [CurrentDir]) + ok = ?PRIM_FILE:set_cwd(CurrentDir) end, ok. -cur_dir_0a(Config) when is_list(Config) -> - cur_dir_0(Config, []). - -cur_dir_0b(Config) when is_list(Config) -> - {ok, Handle} = ?PRIM_FILE:start(), - Result = cur_dir_0(Config, Handle), - ok = ?PRIM_FILE:stop(Handle), - Result. - -cur_dir_0(Config, Handle) -> +cur_dir_0(Config) when is_list(Config) -> %% Find out the current dir, and cd to it ;-) - {ok,BaseDir} = ?PRIM_FILE_call(get_cwd, Handle, []), + {ok,BaseDir} = ?PRIM_FILE:get_cwd(), Dir1 = BaseDir ++ "", %% Check that it's a string - ok = ?PRIM_FILE_call(set_cwd, Handle, [Dir1]), - DirName = atom_to_list(?MODULE) ++ - case Handle of - [] -> - "_curdir"; - _ -> - "_curdir_h" - end, + ok = ?PRIM_FILE:set_cwd(Dir1), + DirName = atom_to_list(?MODULE) ++ "_curdir", %% Make a new dir, and cd to that RootDir = proplists:get_value(priv_dir,Config), NewDir = filename:join(RootDir, DirName), - ok = ?PRIM_FILE_call(make_dir, Handle, [NewDir]), + ok = ?PRIM_FILE:make_dir(NewDir), case {os:type(), length(NewDir) >= 260} of {{win32,_}, true} -> io:format("Skip set_cwd for windows path longer than 260 (MAX_PATH):\n"), io:format("\nNewDir = ~p\n", [NewDir]); _ -> io:format("cd to ~s",[NewDir]), - ok = ?PRIM_FILE_call(set_cwd, Handle, [NewDir]), + ok = ?PRIM_FILE:set_cwd(NewDir), %% Create a file in the new current directory, and check that it %% really is created there UncommonName = "uncommon.fil", {ok,Fd} = ?PRIM_FILE:open(UncommonName, [read, write]), ok = ?PRIM_FILE:close(Fd), - {ok,NewDirFiles} = ?PRIM_FILE_call(list_dir, Handle, ["."]), + {ok,NewDirFiles} = ?PRIM_FILE:list_dir("."), true = lists:member(UncommonName,NewDirFiles), %% Delete the directory and return to the old current directory %% and check that the created file isn't there (too!) expect({error, einval}, {error, eacces}, {error, eexist}, - ?PRIM_FILE_call(del_dir, Handle, [NewDir])), - ?PRIM_FILE_call(delete, Handle, [UncommonName]), - {ok,[]} = ?PRIM_FILE_call(list_dir, Handle, ["."]), - ok = ?PRIM_FILE_call(set_cwd, Handle, [Dir1]), + ?PRIM_FILE:del_dir(NewDir)), + ?PRIM_FILE:delete(UncommonName), + {ok,[]} = ?PRIM_FILE:list_dir("."), + ok = ?PRIM_FILE:set_cwd(Dir1), io:format("cd back to ~s",[Dir1]), - ok = ?PRIM_FILE_call(del_dir, Handle, [NewDir]), - {error, enoent} = ?PRIM_FILE_call(set_cwd, Handle, [NewDir]), - ok = ?PRIM_FILE_call(set_cwd, Handle, [Dir1]), + ok = ?PRIM_FILE:del_dir(NewDir), + {error, enoent} = ?PRIM_FILE:set_cwd(NewDir), + ok = ?PRIM_FILE:set_cwd(Dir1), io:format("cd back to ~s",[Dir1]), - {ok,OldDirFiles} = ?PRIM_FILE_call(list_dir, Handle, ["."]), + {ok,OldDirFiles} = ?PRIM_FILE:list_dir("."), false = lists:member(UncommonName,OldDirFiles) end, %% Try doing some bad things {error, badarg} = - ?PRIM_FILE_call(set_cwd, Handle, [{foo,bar}]), + ?PRIM_FILE:set_cwd({foo,bar}), {error, enoent} = - ?PRIM_FILE_call(set_cwd, Handle, [""]), + ?PRIM_FILE:set_cwd(""), {error, enoent} = - ?PRIM_FILE_call(set_cwd, Handle, [".......a......"]), + ?PRIM_FILE:set_cwd(".......a......"), {ok,BaseDir} = - ?PRIM_FILE_call(get_cwd, Handle, []), %% Still there? + ?PRIM_FILE:get_cwd(), %% Still there? %% On Windows, there should only be slashes, no backslashes, %% in the return value of get_cwd(). %% (The test is harmless on Unix, because filenames usually %% don't contain backslashes.) - {ok, BaseDir} = ?PRIM_FILE_call(get_cwd, Handle, []), + {ok, BaseDir} = ?PRIM_FILE:get_cwd(), false = lists:member($\\, BaseDir), ok. %% Tests ?PRIM_FILE:get_cwd/1. -cur_dir_1a(Config) when is_list(Config) -> - cur_dir_1(Config, []). - -cur_dir_1b(Config) when is_list(Config) -> - {ok, Handle} = ?PRIM_FILE:start(), - Result = cur_dir_1(Config, Handle), - ok = ?PRIM_FILE:stop(Handle), - Result. - -cur_dir_1(Config, Handle) -> +cur_dir_1(Config) when is_list(Config) -> case os:type() of {win32, _} -> - win_cur_dir_1(Config, Handle); + win_cur_dir_1(Config); _ -> {error, enotsup} = - ?PRIM_FILE_call(get_cwd, Handle, ["d:"]) + ?PRIM_FILE:get_cwd("d:") end, ok. -win_cur_dir_1(_Config, Handle) -> - {ok, BaseDir} = ?PRIM_FILE_call(get_cwd, Handle, []), +win_cur_dir_1(_Config) -> + {ok, BaseDir} = ?PRIM_FILE:get_cwd(), %% Get the drive letter from the current directory, %% and try to get current directory for that drive. [Drive, $:|_] = BaseDir, - {ok, BaseDir} = ?PRIM_FILE_call(get_cwd, Handle, [[Drive, $:]]), + {ok, BaseDir} = ?PRIM_FILE:get_cwd([Drive, $:]), io:format("BaseDir = ~s\n", [BaseDir]), %% Unfortunately, there is no way to move away from the @@ -446,12 +374,12 @@ open1(Config) when is_list(Config) -> Name = filename:join(NewDir, "foo1.fil"), {ok,Fd1} = ?PRIM_FILE:open(Name, [read, write]), {ok,Fd2} = ?PRIM_FILE:open(Name, [read]), - Str = "{a,tuple}.\n", - Length = length(Str), - ?PRIM_FILE:write(Fd1,Str), + Bin = list_to_binary("{a,tuple}.\n"), + Length = byte_size(Bin), + ?PRIM_FILE:write(Fd1,Bin), {ok,0} = ?PRIM_FILE:position(Fd1,bof), - {ok, Str} = ?PRIM_FILE:read(Fd1,Length), - {ok, Str} = ?PRIM_FILE:read(Fd2,Length), + {ok, Bin} = ?PRIM_FILE:read(Fd1,Length), + {ok, Bin} = ?PRIM_FILE:read(Fd2,Length), ok = ?PRIM_FILE:close(Fd2), {ok,0} = ?PRIM_FILE:position(Fd1,bof), ok = ?PRIM_FILE:truncate(Fd1), @@ -471,13 +399,13 @@ modes(Config) when is_list(Config) -> ++"_open_modes"), ok = ?PRIM_FILE:make_dir(NewDir), Name1 = filename:join(NewDir, "foo1.fil"), - Marker = "hello, world", - Length = length(Marker), + Marker = <<"hello, world">>, + Length = byte_size(Marker), %% write {ok, Fd1} = ?PRIM_FILE:open(Name1, [write]), ok = ?PRIM_FILE:write(Fd1, Marker), - ok = ?PRIM_FILE:write(Fd1, ".\n"), + ok = ?PRIM_FILE:write(Fd1, <<".\n">>), ok = ?PRIM_FILE:close(Fd1), %% read @@ -496,12 +424,6 @@ modes(Config) when is_list(Config) -> {ok, Marker} = ?PRIM_FILE:read(Fd4, Length), ok = ?PRIM_FILE:close(Fd4), - %% read and binary - BinaryMarker = list_to_binary(Marker), - {ok, Fd5} = ?PRIM_FILE:open(Name1, [read, binary]), - {ok, BinaryMarker} = ?PRIM_FILE:read(Fd5, Length), - ok = ?PRIM_FILE:close(Fd5), - ok. close(Config) when is_list(Config) -> @@ -528,9 +450,9 @@ access(Config) when is_list(Config) -> Name = filename:join(RootDir, atom_to_list(?MODULE) ++"_access.fil"), - Str = "ABCDEFGH", + Bin = <<"ABCDEFGH">>, {ok,Fd1} = ?PRIM_FILE:open(Name, [write]), - ?PRIM_FILE:write(Fd1,Str), + ?PRIM_FILE:write(Fd1,Bin), ok = ?PRIM_FILE:close(Fd1), %% Check that we can't write when in read only mode {ok,Fd2} = ?PRIM_FILE:open(Name, [read]), @@ -542,7 +464,7 @@ access(Config) when is_list(Config) -> end, ok = ?PRIM_FILE:close(Fd2), {ok, Fd3} = ?PRIM_FILE:open(Name, [read]), - {ok, Str} = ?PRIM_FILE:read(Fd3,length(Str)), + {ok, Bin} = ?PRIM_FILE:read(Fd3,byte_size(Bin)), ok = ?PRIM_FILE:close(Fd3), ok. @@ -564,7 +486,7 @@ read_write(Config) when is_list(Config) -> ok. read_write_test(File) -> - Marker = "hello, world", + Marker = <<"hello, world">>, ok = ?PRIM_FILE:write(File, Marker), {ok, 0} = ?PRIM_FILE:position(File, 0), {ok, Marker} = ?PRIM_FILE:read(File, 100), @@ -590,15 +512,15 @@ pread_write(Config) when is_list(Config) -> ok. pread_write_test(File) -> - Marker = "hello, world", - Len = length(Marker), + Marker = <<"hello, world">>, + Len = byte_size(Marker), ok = ?PRIM_FILE:write(File, Marker), {ok, Marker} = ?PRIM_FILE:pread(File, 0, 100), eof = ?PRIM_FILE:pread(File, 100, 1), ok = ?PRIM_FILE:pwrite(File, Len, Marker), {ok, Marker} = ?PRIM_FILE:pread(File, Len, 100), eof = ?PRIM_FILE:pread(File, 100, 1), - MM = Marker ++ Marker, + MM = <<Marker/binary,Marker/binary>>, {ok, MM} = ?PRIM_FILE:pread(File, 0, 100), ok = ?PRIM_FILE:close(File), ok. @@ -655,24 +577,24 @@ pos1(Config) when is_list(Config) -> atom_to_list(?MODULE) ++"_pos1.fil"), {ok, Fd1} = ?PRIM_FILE:open(Name, [write]), - ?PRIM_FILE:write(Fd1,"ABCDEFGH"), + ?PRIM_FILE:write(Fd1,<<"ABCDEFGH">>), ok = ?PRIM_FILE:close(Fd1), {ok, Fd2} = ?PRIM_FILE:open(Name, [read]), %% Start pos is first char io:format("Relative positions"), - {ok, "A"} = ?PRIM_FILE:read(Fd2,1), + {ok, <<"A">>} = ?PRIM_FILE:read(Fd2,1), {ok, 2} = ?PRIM_FILE:position(Fd2,{cur,1}), - {ok, "C"} = ?PRIM_FILE:read(Fd2,1), + {ok, <<"C">>} = ?PRIM_FILE:read(Fd2,1), {ok, 0} = ?PRIM_FILE:position(Fd2,{cur,-3}), - {ok, "A"} = ?PRIM_FILE:read(Fd2,1), + {ok, <<"A">>} = ?PRIM_FILE:read(Fd2,1), %% Backwards from first char should be an error {ok,0} = ?PRIM_FILE:position(Fd2,{cur,-1}), {error, einval} = ?PRIM_FILE:position(Fd2,{cur,-1}), %% Reset position and move again {ok, 0} = ?PRIM_FILE:position(Fd2,0), {ok, 2} = ?PRIM_FILE:position(Fd2,{cur,2}), - {ok, "C"} = ?PRIM_FILE:read(Fd2,1), + {ok, <<"C">>} = ?PRIM_FILE:read(Fd2,1), %% Go a lot forwards {ok, 13} = ?PRIM_FILE:position(Fd2,{cur,10}), eof = ?PRIM_FILE:read(Fd2,1), @@ -684,27 +606,27 @@ pos1(Config) when is_list(Config) -> {ok, 8} = ?PRIM_FILE:position(Fd2,cur), eof = ?PRIM_FILE:read(Fd2,1), {ok, 7} = ?PRIM_FILE:position(Fd2,7), - {ok, "H"} = ?PRIM_FILE:read(Fd2,1), + {ok, <<"H">>} = ?PRIM_FILE:read(Fd2,1), {ok, 0} = ?PRIM_FILE:position(Fd2,0), - {ok, "A"} = ?PRIM_FILE:read(Fd2,1), + {ok, <<"A">>} = ?PRIM_FILE:read(Fd2,1), {ok, 3} = ?PRIM_FILE:position(Fd2,3), - {ok, "D"} = ?PRIM_FILE:read(Fd2,1), + {ok, <<"D">>} = ?PRIM_FILE:read(Fd2,1), {ok, 12} = ?PRIM_FILE:position(Fd2,12), eof = ?PRIM_FILE:read(Fd2,1), {ok, 3} = ?PRIM_FILE:position(Fd2,3), - {ok, "D"} = ?PRIM_FILE:read(Fd2,1), + {ok, <<"D">>} = ?PRIM_FILE:read(Fd2,1), %% Try the {bof,X} notation {ok, 3} = ?PRIM_FILE:position(Fd2,{bof,3}), - {ok, "D"} = ?PRIM_FILE:read(Fd2,1), + {ok, <<"D">>} = ?PRIM_FILE:read(Fd2,1), %% Try eof positions io:format("EOF positions"), {ok, 8} = ?PRIM_FILE:position(Fd2,{eof,0}), eof = ?PRIM_FILE:read(Fd2,1), {ok, 7} = ?PRIM_FILE:position(Fd2,{eof,-1}), - {ok, "H"} = ?PRIM_FILE:read(Fd2,1), + {ok, <<"H">>} = ?PRIM_FILE:read(Fd2,1), {ok, 0} = ?PRIM_FILE:position(Fd2,{eof,-8}), - {ok, "A"} = ?PRIM_FILE:read(Fd2,1), + {ok, <<"A">>} = ?PRIM_FILE:read(Fd2,1), {error, einval} = ?PRIM_FILE:position(Fd2,{eof,-9}), ok. @@ -714,7 +636,7 @@ pos2(Config) when is_list(Config) -> atom_to_list(?MODULE) ++"_pos2.fil"), {ok,Fd1} = ?PRIM_FILE:open(Name, [write]), - ?PRIM_FILE:write(Fd1,"ABCDEFGH"), + ?PRIM_FILE:write(Fd1,<<"ABCDEFGH">>), ok = ?PRIM_FILE:close(Fd1), {ok, Fd2} = ?PRIM_FILE:open(Name, [read]), {error, einval} = ?PRIM_FILE:position(Fd2,-1), @@ -722,35 +644,25 @@ pos2(Config) when is_list(Config) -> %% Make sure that we still can search after an error. {ok, 0} = ?PRIM_FILE:position(Fd2, 0), {ok, 3} = ?PRIM_FILE:position(Fd2, {bof,3}), - {ok, "D"} = ?PRIM_FILE:read(Fd2,1), + {ok, <<"D">>} = ?PRIM_FILE:read(Fd2,1), io:format("DONE"), ok. - -file_info_basic_file_a(Config) when is_list(Config) -> - file_info_basic_file(Config, [], "_a"). - -file_info_basic_file_b(Config) when is_list(Config) -> - {ok, Handle} = ?PRIM_FILE:start(), - Result = file_info_basic_file(Config, Handle, "_b"), - ok = ?PRIM_FILE:stop(Handle), - Result. - -file_info_basic_file(Config, Handle, Suffix) -> +file_info_basic_file(Config) when is_list(Config) -> RootDir = proplists:get_value(priv_dir, Config), %% Create a short file. Name = filename:join(RootDir, atom_to_list(?MODULE) - ++"_basic_test"++Suffix++".fil"), + ++"_basic_test"".fil"), {ok,Fd1} = ?PRIM_FILE:open(Name, [write]), ?PRIM_FILE:write(Fd1, "foo bar"), ok = ?PRIM_FILE:close(Fd1), %% Test that the file has the expected attributes. %% The times are tricky, so we will save them to a separate test case. - {ok, FileInfo} = ?PRIM_FILE_call(read_file_info, Handle, [Name]), + {ok, FileInfo} = ?PRIM_FILE:read_file_info(Name), #file_info{size = Size, type = Type, access = Access, atime = AccessTime, mtime = ModifyTime} = FileInfo, @@ -768,39 +680,30 @@ file_info_basic_file(Config, Handle, Suffix) -> ok. -file_info_basic_directory_a(Config) when is_list(Config) -> - file_info_basic_directory(Config, []). - -file_info_basic_directory_b(Config) when is_list(Config) -> - {ok, Handle} = ?PRIM_FILE:start(), - Result = file_info_basic_directory(Config, Handle), - ok = ?PRIM_FILE:stop(Handle), - Result. - -file_info_basic_directory(Config, Handle) -> +file_info_basic_directory(Config) when is_list(Config) -> %% Note: filename:join/1 removes any trailing slash, %% which is essential for ?PRIM_FILE:read_file_info/1 to work on %% platforms such as Windows95. RootDir = filename:join([proplists:get_value(priv_dir, Config)]), %% Test that the RootDir directory has the expected attributes. - test_directory(RootDir, read_write, Handle), + test_directory(RootDir, read_write), %% Note that on Windows file systems, "/" or "c:/" are *NOT* directories. %% Therefore, test that ?PRIM_FILE:read_file_info/1 behaves %% as if they were directories. case os:type() of {win32, _} -> - test_directory("/", read_write, Handle), - test_directory("c:/", read_write, Handle), - test_directory("c:\\", read_write, Handle); + test_directory("/", read_write), + test_directory("c:/", read_write), + test_directory("c:\\", read_write); _ -> - test_directory("/", read, Handle) + test_directory("/", read) end, ok. -test_directory(Name, ExpectedAccess, Handle) -> - {ok, FileInfo} = ?PRIM_FILE_call(read_file_info, Handle, [Name]), +test_directory(Name, ExpectedAccess) -> + {ok, FileInfo} = ?PRIM_FILE:read_file_info(Name), #file_info{size = Size, type = Type, access = Access, atime = AccessTime, mtime = ModifyTime} = FileInfo, @@ -824,45 +727,24 @@ all_integers([]) -> %% Try something nonexistent. -file_info_bad_a(Config) when is_list(Config) -> - file_info_bad(Config, []). - -file_info_bad_b(Config) when is_list(Config) -> - {ok, Handle} = ?PRIM_FILE:start(), - Result = file_info_bad(Config, Handle), - ok = ?PRIM_FILE:stop(Handle), - Result. - -file_info_bad(Config, Handle) -> +file_info_bad(Config) when is_list(Config) -> RootDir = filename:join([proplists:get_value(priv_dir, Config)]), - {error, enoent} = - ?PRIM_FILE_call( - read_file_info, Handle, - [filename:join(RootDir, - atom_to_list(?MODULE)++"_nonexistent")]), + NonExistent = filename:join(RootDir, atom_to_list(?MODULE)++"_nonexistent"), + {error, enoent} = ?PRIM_FILE:read_file_info(NonExistent), ok. %% Test that the file times behave as they should. -file_info_times_a(Config) when is_list(Config) -> - file_info_times(Config, [], "_a"). - -file_info_times_b(Config) when is_list(Config) -> - {ok, Handle} = ?PRIM_FILE:start(), - Result = file_info_times(Config, Handle, "_b"), - ok = ?PRIM_FILE:stop(Handle), - Result. - -file_info_times(Config, Handle, Suffix) -> +file_info_times(Config) when is_list(Config) -> %% We have to try this twice, since if the test runs across the change %% of a month the time diff calculations will fail. But it won't happen %% if you run it twice in succession. test_server:m_out_of_n( 1,2, - fun() -> file_info_int(Config, Handle, Suffix) end), + fun() -> file_info_int(Config) end), ok. -file_info_int(Config, Handle, Suffix) -> +file_info_int(Config) -> %% Note: filename:join/1 removes any trailing slash, %% which is essential for ?PRIM_FILE:read_file_info/1 to work on %% platforms such as Windows95. @@ -872,14 +754,14 @@ file_info_int(Config, Handle, Suffix) -> Name = filename:join(RootDir, atom_to_list(?MODULE) - ++"_file_info"++Suffix++".fil"), + ++"_file_info.fil"), {ok,Fd1} = ?PRIM_FILE:open(Name, [write]), ?PRIM_FILE:write(Fd1,"foo"), %% check that the file got a modify date max a few seconds away from now {ok, #file_info{type = regular, atime = AccTime1, mtime = ModTime1}} = - ?PRIM_FILE_call(read_file_info, Handle, [Name]), + ?PRIM_FILE:read_file_info(Name), Now = erlang:localtime(), io:format("Now ~p",[Now]), io:format("Open file Acc ~p Mod ~p",[AccTime1,ModTime1]), @@ -897,7 +779,7 @@ file_info_int(Config, Handle, Suffix) -> ok = ?PRIM_FILE:close(Fd1), {ok, #file_info{size = Size, type = regular, access = Access, atime = AccTime2, mtime = ModTime2}} = - ?PRIM_FILE_call(read_file_info, Handle, [Name]), + ?PRIM_FILE:read_file_info(Name), io:format("Closed file Acc ~p Mod ~p",[AccTime2,ModTime2]), true = time_dist(ModTime1, ModTime2) >= 0, @@ -909,7 +791,7 @@ file_info_int(Config, Handle, Suffix) -> {ok, #file_info{size = DSize, type = directory, access = DAccess, atime = AccTime3, mtime = ModTime3}} = - ?PRIM_FILE_call(read_file_info, Handle, [RootDir]), + ?PRIM_FILE:read_file_info(RootDir), %% this dir was modified only a few secs ago io:format("Dir Acc ~p; Mod ~p; Now ~p", [AccTime3, ModTime3, Now]), @@ -936,16 +818,7 @@ filter_atime(Atime, Config) -> %% Test the write_file_info/2 function. -file_write_file_info_a(Config) when is_list(Config) -> - file_write_file_info(Config, [], "_a"). - -file_write_file_info_b(Config) when is_list(Config) -> - {ok, Handle} = ?PRIM_FILE:start(), - Result = file_write_file_info(Config, Handle, "_b"), - ok = ?PRIM_FILE:stop(Handle), - Result. - -file_write_file_info(Config, Handle, Suffix) -> +file_write_file_info(Config) when is_list(Config) -> RootDir = get_good_directory(Config), io:format("RootDir = ~p", [RootDir]), @@ -955,16 +828,16 @@ file_write_file_info(Config, Handle, Suffix) -> Name = filename:join(RootDir, atom_to_list(?MODULE) - ++"_write_file_info_ro"++Suffix), + ++"_write_file_info_ro"), ok = ?PRIM_FILE:write_file(Name, "hello"), Time = {{1997, 01, 02}, {12, 35, 42}}, Info = #file_info{mode=8#400, atime=Time, mtime=Time, ctime=Time}, - ok = ?PRIM_FILE_call(write_file_info, Handle, [Name, Info]), + ok = ?PRIM_FILE:write_file_info(Name, Info), %% Read back the times. {ok, ActualInfo} = - ?PRIM_FILE_call(read_file_info, Handle, [Name]), + ?PRIM_FILE:read_file_info(Name), #file_info{mode=_Mode, atime=ActAtime, mtime=Time, ctime=ActCtime} = ActualInfo, FilteredAtime = filter_atime(Time, Config), @@ -980,14 +853,11 @@ file_write_file_info(Config, Handle, Suffix) -> {error, eacces} = ?PRIM_FILE:write_file(Name, "hello again"), %% Make the file writable again. - - ?PRIM_FILE_call(write_file_info, Handle, - [Name, #file_info{mode=8#600}]), + ?PRIM_FILE:write_file_info(Name, #file_info{mode=8#600}), ok = ?PRIM_FILE:write_file(Name, "hello again"), %% And unwritable. - ?PRIM_FILE_call(write_file_info, Handle, - [Name, #file_info{mode=8#400}]), + ?PRIM_FILE:write_file_info(Name, #file_info{mode=8#400}), {error, eacces} = ?PRIM_FILE:write_file(Name, "hello again"), %% Write the times again. @@ -995,9 +865,9 @@ file_write_file_info(Config, Handle, Suffix) -> NewTime = {{1997, 02, 15}, {13, 18, 20}}, NewInfo = #file_info{atime=NewTime, mtime=NewTime, ctime=NewTime}, - ok = ?PRIM_FILE_call(write_file_info, Handle, [Name, NewInfo]), + ok = ?PRIM_FILE:write_file_info(Name, NewInfo), {ok, ActualInfo2} = - ?PRIM_FILE_call(read_file_info, Handle, [Name]), + ?PRIM_FILE:read_file_info(Name), #file_info{atime=NewActAtime, mtime=NewTime, ctime=NewActCtime} = ActualInfo2, NewFilteredAtime = filter_atime(NewTime, Config), @@ -1012,14 +882,12 @@ file_write_file_info(Config, Handle, Suffix) -> %% Make the file writeable again, so that we can remove the %% test suites ... :-) - ?PRIM_FILE_call(write_file_info, Handle, - [Name, #file_info{mode=8#600}]), + ?PRIM_FILE:write_file_info(Name, #file_info{mode=8#600}), ok. %% Test the write_file_info/3 function. file_write_file_info_opts(Config) when is_list(Config) -> - {ok, Handle} = ?PRIM_FILE:start(), RootDir = get_good_directory(Config), io:format("RootDir = ~p", [RootDir]), @@ -1028,7 +896,7 @@ file_write_file_info_opts(Config) when is_list(Config) -> lists:foreach(fun ({FI, Opts}) -> - ok = ?PRIM_FILE_call(write_file_info, Handle, [Name, FI, Opts]) + ok = ?PRIM_FILE:write_file_info(Name, FI, Opts) end, [ {#file_info{ mode=8#600, atime = Time, mtime = Time, ctime = Time}, Opts} || Opts <- [[{time, posix}]], @@ -1038,7 +906,7 @@ file_write_file_info_opts(Config) when is_list(Config) -> %% REM: determine date range dependent on time_t = Uint32 | Sint32 | Sint64 | Uint64 %% Determine time_t on os:type()? lists:foreach(fun ({FI, Opts}) -> - ok = ?PRIM_FILE_call(write_file_info, Handle, [Name, FI, Opts]) + ok = ?PRIM_FILE:write_file_info(Name, FI, Opts) end, [ {#file_info{ mode=8#400, atime = Time, mtime = Time, ctime = Time}, Opts} || Opts <- [[{time, universal}],[{time, local}]], Time <- [ @@ -1050,11 +918,9 @@ file_write_file_info_opts(Config) when is_list(Config) -> {{2037,2,3},{23,59,59}}, erlang:localtime() ]]), - ok = ?PRIM_FILE:stop(Handle), ok. file_read_file_info_opts(Config) when is_list(Config) -> - {ok, Handle} = ?PRIM_FILE:start(), RootDir = get_good_directory(Config), io:format("RootDir = ~p", [RootDir]), @@ -1063,41 +929,38 @@ file_read_file_info_opts(Config) when is_list(Config) -> lists:foreach(fun (Opts) -> - {ok,_} = ?PRIM_FILE_call(read_file_info, Handle, [Name, Opts]) + {ok,_} = ?PRIM_FILE:read_file_info(Name, Opts) end, [[{time, Type}] || Type <- [local, universal, posix]]), - ok = ?PRIM_FILE:stop(Handle), ok. %% Test the write and read back *_file_info/3 functions. file_write_read_file_info_opts(Config) when is_list(Config) -> - {ok, Handle} = ?PRIM_FILE:start(), RootDir = get_good_directory(Config), io:format("RootDir = ~p", [RootDir]), Name = filename:join(RootDir, atom_to_list(?MODULE) ++"_read_write_file_info_opts"), ok = ?PRIM_FILE:write_file(Name, "hello_opts2"), - ok = file_write_read_file_info_opts(Handle, Name, {{1989, 04, 28}, {19,30,22}}, [{time, local}]), - ok = file_write_read_file_info_opts(Handle, Name, {{1989, 04, 28}, {19,30,22}}, [{time, universal}]), + ok = file_write_read_file_info_opts(Name, {{1989, 04, 28}, {19,30,22}}, [{time, local}]), + ok = file_write_read_file_info_opts(Name, {{1989, 04, 28}, {19,30,22}}, [{time, universal}]), %% will not work on platforms with unsigned time_t - %ok = file_write_read_file_info_opts(Handle, Name, {{1930, 04, 28}, {19,30,22}}, [{time, local}]), - %ok = file_write_read_file_info_opts(Handle, Name, {{1930, 04, 28}, {19,30,22}}, [{time, universal}]), - ok = file_write_read_file_info_opts(Handle, Name, 1, [{time, posix}]), + %ok = file_write_read_file_info_opts(Name, {{1930, 04, 28}, {19,30,22}}, [{time, local}]), + %ok = file_write_read_file_info_opts(Name, {{1930, 04, 28}, {19,30,22}}, [{time, universal}]), + ok = file_write_read_file_info_opts(Name, 1, [{time, posix}]), %% will not work on platforms with unsigned time_t - %ok = file_write_read_file_info_opts(Handle, Name, -1, [{time, posix}]), - %ok = file_write_read_file_info_opts(Handle, Name, -300000, [{time, posix}]), - ok = file_write_read_file_info_opts(Handle, Name, 300000, [{time, posix}]), - ok = file_write_read_file_info_opts(Handle, Name, 0, [{time, posix}]), + %ok = file_write_read_file_info_opts(Name, -1, [{time, posix}]), + %ok = file_write_read_file_info_opts(Name, -300000, [{time, posix}]), + ok = file_write_read_file_info_opts(Name, 300000, [{time, posix}]), + ok = file_write_read_file_info_opts(Name, 0, [{time, posix}]), - ok = ?PRIM_FILE:stop(Handle), ok. -file_write_read_file_info_opts(Handle, Name, Mtime, Opts) -> - {ok, FI} = ?PRIM_FILE_call(read_file_info, Handle, [Name, Opts]), +file_write_read_file_info_opts(Name, Mtime, Opts) -> + {ok, FI} = ?PRIM_FILE:read_file_info(Name, Opts), FI2 = FI#file_info{ mtime = Mtime }, - ok = ?PRIM_FILE_call(write_file_info, Handle, [Name, FI2, Opts]), - {ok, FI3} = ?PRIM_FILE_call(read_file_info, Handle, [Name, Opts]), + ok = ?PRIM_FILE:write_file_info(Name, FI2, Opts), + {ok, FI3} = ?PRIM_FILE:read_file_info(Name, Opts), io:format("Expecting mtime = ~p, got ~p~n", [FI2#file_info.mtime, FI3#file_info.mtime]), FI2 = FI3, ok. @@ -1175,8 +1038,8 @@ advise(Config) when is_list(Config) -> atom_to_list(?MODULE) ++"_advise.fil"), - Line1 = "Hello\n", - Line2 = "World!\n", + Line1 = <<"Hello\n">>, + Line2 = <<"World!\n">>, {ok, Fd} = ?PRIM_FILE:open(Advise, [write]), ok = ?PRIM_FILE:advise(Fd, 0, 0, normal), @@ -1226,7 +1089,7 @@ advise(Config) when is_list(Config) -> {ok, Fd9} = ?PRIM_FILE:open(Advise, [read]), Offset = 0, %% same as a 0 length in some implementations - Length = length(Line1) + length(Line2), + Length = byte_size(Line1) + byte_size(Line2), ok = ?PRIM_FILE:advise(Fd9, Offset, Length, sequential), {ok, Line1} = ?PRIM_FILE:read_line(Fd9), {ok, Line2} = ?PRIM_FILE:read_line(Fd9), @@ -1250,23 +1113,18 @@ do_large_write(Name) -> Chunk = <<0:ChunkSize/unit:8>>, Data = zip_data(lists:duplicate(Chunks, Chunk), Interleave), Size = Chunks * ChunkSize + Chunks, % 4 G + 32 - Wordsize = erlang:system_info(wordsize), - case prim_file:write_file(Name, Data) of - ok when Wordsize =:= 8 -> - {ok,#file_info{size=Size}} = file:read_file_info(Name), - {ok,Fd} = prim_file:open(Name, [read]), - check_large_write(Fd, ChunkSize, 0, Interleave); - {error,einval} when Wordsize =:= 4 -> - ok - end. + ok = ?PRIM_FILE:write_file(Name, Data), + {ok,#file_info{size=Size}} = file:read_file_info(Name), + {ok,Fd} = ?PRIM_FILE:open(Name, [read]), + check_large_write(Fd, ChunkSize, 0, Interleave). check_large_write(Fd, ChunkSize, Pos, [X|Interleave]) -> Pos1 = Pos + ChunkSize, - {ok,Pos1} = prim_file:position(Fd, {cur,ChunkSize}), - {ok,[X]} = prim_file:read(Fd, 1), + {ok,Pos1} = ?PRIM_FILE:position(Fd, {cur,ChunkSize}), + {ok,<<X>>} = ?PRIM_FILE:read(Fd, 1), check_large_write(Fd, ChunkSize, Pos1+1, Interleave); check_large_write(Fd, _, _, []) -> - eof = prim_file:read(Fd, 1), + eof = ?PRIM_FILE:read(Fd, 1), ok. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% @@ -1338,71 +1196,53 @@ allocate_and_assert(Fd, Offset, Length) -> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -delete_a(Config) when is_list(Config) -> - delete(Config, [], "_a"). - -delete_b(Config) when is_list(Config) -> - {ok, Handle} = ?PRIM_FILE:start(), - Result = delete(Config, Handle, "_b"), - ok = ?PRIM_FILE:stop(Handle), - Result. - -delete(Config, Handle, Suffix) -> +delete(Config) when is_list(Config) -> RootDir = proplists:get_value(priv_dir,Config), Name = filename:join(RootDir, atom_to_list(?MODULE) - ++"_delete"++Suffix++".fil"), + ++"_delete.fil"), {ok, Fd1} = ?PRIM_FILE:open(Name, [write]), ?PRIM_FILE:write(Fd1,"ok.\n"), ok = ?PRIM_FILE:close(Fd1), %% Check that the file is readable {ok, Fd2} = ?PRIM_FILE:open(Name, [read]), ok = ?PRIM_FILE:close(Fd2), - ok = ?PRIM_FILE_call(delete, Handle, [Name]), + ok = ?PRIM_FILE:delete(Name), %% Check that the file is not readable anymore {error, _} = ?PRIM_FILE:open(Name, [read]), %% Try deleting a nonexistent file - {error, enoent} = ?PRIM_FILE_call(delete, Handle, [Name]), + {error, enoent} = ?PRIM_FILE:delete(Name), ok. -rename_a(Config) when is_list(Config) -> - rename(Config, [], "_a"). - -rename_b(Config) when is_list(Config) -> - {ok, Handle} = ?PRIM_FILE:start(), - Result = rename(Config, Handle, "_b"), - ok = ?PRIM_FILE:stop(Handle), - Result. - -rename(Config, Handle, Suffix) -> +rename(Config) when is_list(Config) -> RootDir = proplists:get_value(priv_dir,Config), - FileName1 = atom_to_list(?MODULE)++"_rename"++Suffix++".fil", - FileName2 = atom_to_list(?MODULE)++"_rename"++Suffix++".ful", + FileName1 = atom_to_list(?MODULE)++"_rename.fil", + FileName2 = atom_to_list(?MODULE)++"_rename.ful", Name1 = filename:join(RootDir, FileName1), Name2 = filename:join(RootDir, FileName2), {ok,Fd1} = ?PRIM_FILE:open(Name1, [write]), ok = ?PRIM_FILE:close(Fd1), %% Rename, and check that it really changed name - ok = ?PRIM_FILE_call(rename, Handle, [Name1, Name2]), + ok = ?PRIM_FILE:rename(Name1, Name2), {error, _} = ?PRIM_FILE:open(Name1, [read]), {ok, Fd2} = ?PRIM_FILE:open(Name2, [read]), ok = ?PRIM_FILE:close(Fd2), %% Try renaming something to itself - ok = ?PRIM_FILE_call(rename, Handle, [Name2, Name2]), + ok = ?PRIM_FILE:rename(Name2, Name2), %% Try renaming something that doesn't exist {error, enoent} = - ?PRIM_FILE_call(rename, Handle, [Name1, Name2]), + ?PRIM_FILE:rename(Name1, Name2), %% Try renaming to something else than a string {error, badarg} = - ?PRIM_FILE_call(rename, Handle, [Name1, foobar]), + ?PRIM_FILE:rename(Name1, foobar), %% Move between directories DirName1 = filename:join(RootDir, atom_to_list(?MODULE) - ++"_rename_dir"++Suffix), + ++"_rename_dir"), DirName2 = filename:join(RootDir, atom_to_list(?MODULE) - ++"_second_rename_dir"++Suffix), + ++"_second_rename_dir"), Name1foo = filename:join(DirName1, "foo.fil"), Name2foo = filename:join(DirName2, "foo.fil"), Name2bar = filename:join(DirName2, "bar.dir"), @@ -1410,21 +1250,21 @@ rename(Config, Handle, Suffix) -> %% The name has to include the full file name, path is not enough expect( {error, eexist}, {error, eisdir}, - ?PRIM_FILE_call(rename, Handle, [Name2, DirName1])), + ?PRIM_FILE:rename(Name2, DirName1)), ok = - ?PRIM_FILE_call(rename, Handle, [Name2, Name1foo]), + ?PRIM_FILE:rename(Name2, Name1foo), %% Now rename the directory - ok = ?PRIM_FILE_call(rename, Handle, [DirName1, DirName2]), + ok = ?PRIM_FILE:rename(DirName1, DirName2), %% And check that the file is there now {ok,Fd3} = ?PRIM_FILE:open(Name2foo, [read]), ok = ?PRIM_FILE:close(Fd3), %% Try some dirty things now: move the directory into itself {error, Msg1} = - ?PRIM_FILE_call(rename, Handle, [DirName2, Name2bar]), + ?PRIM_FILE:rename(DirName2, Name2bar), io:format("Errmsg1: ~p",[Msg1]), %% move dir into a file in itself {error, Msg2} = - ?PRIM_FILE_call(rename, Handle, [DirName2, Name2foo]), + ?PRIM_FILE:rename(DirName2, Name2foo), io:format("Errmsg2: ~p",[Msg2]), ok. @@ -1657,165 +1497,19 @@ e_del_dir(Config) when is_list(Config) -> ok. -%% Trying reading and positioning from a compressed file. - -read_compressed(Config) when is_list(Config) -> - Data = proplists:get_value(data_dir, Config), - Real = filename:join(Data, "realmen.html.gz"), - {ok, Fd} = ?PRIM_FILE:open(Real, [read, compressed]), - try_read_file(Fd). - -%% Trying reading and positioning from an uncompressed file, -%% but with the compressed flag given. - -read_not_really_compressed(Config) when is_list(Config) -> - Data = proplists:get_value(data_dir, Config), - Priv = proplists:get_value(priv_dir, Config), - - %% The file realmen.html might have got CRs added (by WinZip). - %% Remove them, or the file positions will not be correct. - - Real = filename:join(Data, "realmen.html"), - RealPriv = filename:join(Priv, - atom_to_list(?MODULE)++"_realmen.html"), - {ok, RealDataBin} = ?PRIM_FILE:read_file(Real), - RealData = remove_crs(binary_to_list(RealDataBin), []), - ok = ?PRIM_FILE:write_file(RealPriv, RealData), - {ok, Fd} = ?PRIM_FILE:open(RealPriv, [read, compressed]), - try_read_file(Fd). - -remove_crs([$\r|Rest], Result) -> - remove_crs(Rest, Result); -remove_crs([C|Rest], Result) -> - remove_crs(Rest, [C|Result]); -remove_crs([], Result) -> - lists:reverse(Result). - -try_read_file(Fd) -> - %% Seek to the current position (nothing should happen). - - {ok, 0} = ?PRIM_FILE:position(Fd, 0), - {ok, 0} = ?PRIM_FILE:position(Fd, {cur, 0}), - - %% Read a few lines from a compressed file. - - ShouldBe = "<TITLE>Real Programmers Don't Use PASCAL</TITLE>\n", - {ok, ShouldBe} = ?PRIM_FILE:read(Fd, length(ShouldBe)), - - %% Now seek forward. - - {ok, 381} = ?PRIM_FILE:position(Fd, 381), - Back = "Back in the good old days -- the \"Golden Era\" " ++ - "of computers, it was\n", - {ok, Back} = ?PRIM_FILE:read(Fd, length(Back)), - - %% Try to search forward relative to the current position. - - {ok, CurPos} = ?PRIM_FILE:position(Fd, {cur, 0}), - RealPos = 4273, - {ok, RealPos} = ?PRIM_FILE:position(Fd, {cur, RealPos-CurPos}), - RealProg = "<LI> Real Programmers aren't afraid to use GOTOs.\n", - {ok, RealProg} = ?PRIM_FILE:read(Fd, length(RealProg)), - - %% Seek backward. - - AfterTitle = length("<TITLE>"), - {ok, AfterTitle} = ?PRIM_FILE:position(Fd, AfterTitle), - Title = "Real Programmers Don't Use PASCAL</TITLE>\n", - {ok, Title} = ?PRIM_FILE:read(Fd, length(Title)), - - %% Done. - - ?PRIM_FILE:close(Fd), - ok. - -write_compressed(Config) when is_list(Config) -> - Priv = proplists:get_value(priv_dir, Config), - MyFile = filename:join(Priv, - atom_to_list(?MODULE)++"_test.gz"), - - %% Write a file. - - {ok, Fd} = ?PRIM_FILE:open(MyFile, [write, compressed]), - {ok, 0} = ?PRIM_FILE:position(Fd, 0), - Prefix = "hello\n", - End = "end\n", - ok = ?PRIM_FILE:write(Fd, Prefix), - {ok, 143} = ?PRIM_FILE:position(Fd, 143), - ok = ?PRIM_FILE:write(Fd, End), - ok = ?PRIM_FILE:close(Fd), - - %% Read the file and verify the contents. - - {ok, Fd1} = ?PRIM_FILE:open(MyFile, [read, compressed]), - {ok, Prefix} = ?PRIM_FILE:read(Fd1, length(Prefix)), - Second = lists:duplicate(143-length(Prefix), 0) ++ End, - {ok, Second} = ?PRIM_FILE:read(Fd1, length(Second)), - ok = ?PRIM_FILE:close(Fd1), - - %% Ensure that the file is compressed. - - TotalSize = 143 + length(End), - case ?PRIM_FILE:read_file_info(MyFile) of - {ok, #file_info{size=Size}} when Size < TotalSize -> - ok; - {ok, #file_info{size=Size}} when Size == TotalSize -> - ct:fail(file_not_compressed) - end, - - %% Write again to ensure that the file is truncated. - - {ok, Fd2} = ?PRIM_FILE:open(MyFile, [write, compressed]), - NewString = "aaaaaaaaaaa", - ok = ?PRIM_FILE:write(Fd2, NewString), - ok = ?PRIM_FILE:close(Fd2), - {ok, Fd3} = ?PRIM_FILE:open(MyFile, [read, compressed]), - {ok, NewString} = ?PRIM_FILE:read(Fd3, 1024), - ok = ?PRIM_FILE:close(Fd3), - - ok. - -compress_errors(Config) when is_list(Config) -> - Data = proplists:get_value(data_dir, Config), - {error, enoent} = ?PRIM_FILE:open("non_existing__", - [compressed, read]), - {error, einval} = ?PRIM_FILE:open("non_existing__", - [compressed, read, write]), - - %% Read a corrupted .gz file. - - Corrupted = filename:join(Data, "corrupted.gz"), - {ok, Fd} = ?PRIM_FILE:open(Corrupted, [read, compressed]), - {error, eio} = ?PRIM_FILE:read(Fd, 100), - ?PRIM_FILE:close(Fd), - - ok. - - -%% Test creating a hard link. -make_link_a(Config) when is_list(Config) -> - make_link(Config, [], "_a"). - -%% Test creating a hard link. -make_link_b(Config) when is_list(Config) -> - {ok, Handle} = ?PRIM_FILE:start(), - Result = make_link(Config, Handle, "_b"), - ok = ?PRIM_FILE:stop(Handle), - Result. - -make_link(Config, Handle, Suffix) -> +make_link(Config) when is_list(Config) -> RootDir = proplists:get_value(priv_dir, Config), NewDir = filename:join(RootDir, atom_to_list(?MODULE) - ++"_make_link"++Suffix), - ok = ?PRIM_FILE_call(make_dir, Handle, [NewDir]), + ++"_make_link"), + ok = ?PRIM_FILE:make_dir(NewDir), Name = filename:join(NewDir, "a_file"), ok = ?PRIM_FILE:write_file(Name, "some contents\n"), Alias = filename:join(NewDir, "an_alias"), Result = - case ?PRIM_FILE_call(make_link, Handle, [Name, Alias]) of + case ?PRIM_FILE:make_link(Name, Alias) of {error, enotsup} -> {skipped, "Links not supported on this platform"}; ok -> @@ -1826,12 +1520,12 @@ make_link(Config, Handle, Suffix) -> %% since they are not used on symbolic links. {ok, Info} = - ?PRIM_FILE_call(read_link_info, Handle, [Name]), + ?PRIM_FILE:read_link_info(Name), {ok, Info} = - ?PRIM_FILE_call(read_link_info, Handle, [Alias]), + ?PRIM_FILE:read_link_info(Alias), #file_info{links = 2, type = regular} = Info, {error, eexist} = - ?PRIM_FILE_call(make_link, Handle, [Name, Alias]), + ?PRIM_FILE:make_link(Name, Alias), ok end, @@ -1843,30 +1537,19 @@ read_link_info_for_non_link(Config) when is_list(Config) -> {ok, #file_info{type=directory}} = ?PRIM_FILE:read_link_info("."), ok. -%% Test operations on symbolic links (for Unix). -symlinks_a(Config) when is_list(Config) -> - symlinks(Config, [], "_a"). - -%% Test operations on symbolic links (for Unix). -symlinks_b(Config) when is_list(Config) -> - {ok, Handle} = ?PRIM_FILE:start(), - Result = symlinks(Config, Handle, "_b"), - ok = ?PRIM_FILE:stop(Handle), - Result. - -symlinks(Config, Handle, Suffix) -> +symlinks(Config) when is_list(Config) -> RootDir = proplists:get_value(priv_dir, Config), NewDir = filename:join(RootDir, atom_to_list(?MODULE) - ++"_make_symlink"++Suffix), - ok = ?PRIM_FILE_call(make_dir, Handle, [NewDir]), + ++"_make_symlink"), + ok = ?PRIM_FILE:make_dir(NewDir), Name = filename:join(NewDir, "a_plain_file"), ok = ?PRIM_FILE:write_file(Name, "some stupid content\n"), Alias = filename:join(NewDir, "a_symlink_alias"), Result = - case ?PRIM_FILE_call(make_symlink, Handle, [Name, Alias]) of + case ?PRIM_FILE:make_symlink(Name, Alias) of {error, enotsup} -> {skipped, "Links not supported on this platform"}; {error, eperm} -> @@ -1874,20 +1557,20 @@ symlinks(Config, Handle, Suffix) -> {skipped, "Windows user not privileged to create links"}; ok -> {ok, Info1} = - ?PRIM_FILE_call(read_file_info, Handle, [Name]), + ?PRIM_FILE:read_file_info(Name), {ok, Info1} = - ?PRIM_FILE_call(read_file_info, Handle, [Alias]), + ?PRIM_FILE:read_file_info(Alias), {ok, Info1} = - ?PRIM_FILE_call(read_link_info, Handle, [Name]), + ?PRIM_FILE:read_link_info(Name), #file_info{links = 1, type = regular} = Info1, {ok, Info2} = - ?PRIM_FILE_call(read_link_info, Handle, [Alias]), + ?PRIM_FILE:read_link_info(Alias), #file_info{links=1, type=symlink} = Info2, {ok, Name} = - ?PRIM_FILE_call(read_link, Handle, [Alias]), + ?PRIM_FILE:read_link(Alias), {ok, Name} = - ?PRIM_FILE_call(read_link_all, Handle, [Alias]), + ?PRIM_FILE:read_link_all(Alias), %% If all is good, delete dir again (avoid hanging dir on windows) rm_rf(?PRIM_FILE,NewDir), ok @@ -1907,10 +1590,9 @@ list_dir_limit(Config) when is_list(Config) -> RootDir = proplists:get_value(priv_dir, Config), NewDir = filename:join(RootDir, atom_to_list(?MODULE)++"_list_dir_limit"), - {ok, Handle1} = ?PRIM_FILE:start(), - ok = ?PRIM_FILE_call(make_dir, Handle1, [NewDir]), + ok = ?PRIM_FILE:make_dir(NewDir), Ref = erlang:start_timer(MaxTime*1000, self(), []), - Result = list_dir_limit_loop(NewDir, Handle1, Ref, MaxNumber, 0), + Result = list_dir_limit_loop(NewDir, Ref, MaxNumber, 0), Time = case erlang:cancel_timer(Ref) of false -> MaxTime; T -> MaxTime - (T div 1000) @@ -1920,21 +1602,18 @@ list_dir_limit(Config) when is_list(Config) -> {error, _Reason, N} -> N; _ -> 0 end, - {ok, Handle2} = ?PRIM_FILE:start(), - list_dir_limit_cleanup(NewDir, Handle2, Number, 0), - ok = ?PRIM_FILE:stop(Handle1), - ok = ?PRIM_FILE:stop(Handle2), + list_dir_limit_cleanup(NewDir, Number, 0), {ok, Number} = Result, {comment, "Created " ++ integer_to_list(Number) ++ " files in " ++ integer_to_list(Time) ++ " seconds."}. -list_dir_limit_loop(Dir, Handle, _Ref, N, Cnt) when Cnt >= N -> - list_dir_check(Dir, Handle, Cnt); -list_dir_limit_loop(Dir, Handle, Ref, N, Cnt) -> +list_dir_limit_loop(Dir, _Ref, N, Cnt) when Cnt >= N -> + list_dir_check(Dir, Cnt); +list_dir_limit_loop(Dir, Ref, N, Cnt) -> receive {timeout, Ref, []} -> - list_dir_check(Dir, Handle, Cnt) + list_dir_check(Dir, Cnt) after 0 -> Name = integer_to_list(Cnt), case ?PRIM_FILE:write_file(filename:join(Dir, Name), Name) of @@ -1942,23 +1621,23 @@ list_dir_limit_loop(Dir, Handle, Ref, N, Cnt) -> Next = Cnt + 1, case Cnt rem 100 of 0 -> - case list_dir_check(Dir, Handle, Next) of + case list_dir_check(Dir, Next) of {ok, Next} -> list_dir_limit_loop( - Dir, Handle, Ref, N, Next); + Dir, Ref, N, Next); Other -> Other end; _ -> - list_dir_limit_loop(Dir, Handle, Ref, N, Next) + list_dir_limit_loop(Dir, Ref, N, Next) end; {error, Reason} -> {error, Reason, Cnt} end end. -list_dir_check(Dir, Handle, Cnt) -> - case ?PRIM_FILE:list_dir(Handle, Dir) of +list_dir_check(Dir, Cnt) -> + case ?PRIM_FILE:list_dir(Dir) of {ok, ListDir} -> case length(ListDir) of Cnt -> @@ -1975,18 +1654,18 @@ list_dir_check(Dir, Handle, Cnt) -> %% Deletes N files while ignoring errors, then continues deleting %% as long as they exist. -list_dir_limit_cleanup(Dir, Handle, N, Cnt) when Cnt >= N -> +list_dir_limit_cleanup(Dir, N, Cnt) when Cnt >= N -> Name = integer_to_list(Cnt), - case ?PRIM_FILE:delete(Handle, filename:join(Dir, Name)) of + case ?PRIM_FILE:delete(filename:join(Dir, Name)) of ok -> - list_dir_limit_cleanup(Dir, Handle, N, Cnt+1); + list_dir_limit_cleanup(Dir, N, Cnt+1); _ -> ok end; -list_dir_limit_cleanup(Dir, Handle, N, Cnt) -> +list_dir_limit_cleanup(Dir, N, Cnt) -> Name = integer_to_list(Cnt), - ?PRIM_FILE:delete(Handle, filename:join(Dir, Name)), - list_dir_limit_cleanup(Dir, Handle, N, Cnt+1). + ?PRIM_FILE:delete(filename:join(Dir, Name)), + list_dir_limit_cleanup(Dir, N, Cnt+1). %%% %%% Test list_dir() on a non-existing pathname. @@ -1995,7 +1674,7 @@ list_dir_limit_cleanup(Dir, Handle, N, Cnt) -> list_dir_error(Config) -> Priv = proplists:get_value(priv_dir, Config), NonExisting = filename:join(Priv, "non-existing-dir"), - {error,enoent} = prim_file:list_dir(NonExisting), + {error,enoent} = ?PRIM_FILE:list_dir(NonExisting), ok. %%% @@ -2063,7 +1742,7 @@ do_run_large_file_test(Config, Run, Name0) -> {'DOWN',Mref,_,_,_} -> ok; {Tester,done} -> ok end, - prim_file:delete(Name) + ?PRIM_FILE:delete(Name) end), %% Run the test case. diff --git a/lib/kernel/test/sendfile_SUITE.erl b/lib/kernel/test/sendfile_SUITE.erl index bfa564c32c..0c0b1cbcb6 100644 --- a/lib/kernel/test/sendfile_SUITE.erl +++ b/lib/kernel/test/sendfile_SUITE.erl @@ -23,30 +23,41 @@ -include_lib("common_test/include/ct.hrl"). -include_lib("kernel/include/file.hrl"). --compile(export_all). - -all() -> [{group,async_threads}, - {group,no_async_threads}]. - -groups() -> - [{async_threads,[],tcs()}, - {no_async_threads,[],tcs()}]. - -tcs() -> - [t_sendfile_small - ,t_sendfile_big_all - ,t_sendfile_big_size - ,t_sendfile_many_small - ,t_sendfile_partial - ,t_sendfile_offset - ,t_sendfile_sendafter - ,t_sendfile_recvafter - ,t_sendfile_recvafter_remoteclose - ,t_sendfile_sendduring - ,t_sendfile_recvduring - ,t_sendfile_closeduring - ,t_sendfile_crashduring - ]. +-export([all/0, init_per_suite/1, end_per_suite/1, init_per_testcase/2]). + +-export([sendfile_server/2, sendfile_do_recv/2, init/1, handle_event/2]). + +-export( + [t_sendfile_small/1, + t_sendfile_big_all/1, + t_sendfile_big_size/1, + t_sendfile_many_small/1, + t_sendfile_partial/1, + t_sendfile_offset/1, + t_sendfile_sendafter/1, + t_sendfile_recvafter/1, + t_sendfile_recvafter_remoteclose/1, + t_sendfile_sendduring/1, + t_sendfile_recvduring/1, + t_sendfile_closeduring/1, + t_sendfile_crashduring/1, + t_sendfile_arguments/1]). + +all() -> + [t_sendfile_small, + t_sendfile_big_all, + t_sendfile_big_size, + t_sendfile_many_small, + t_sendfile_partial, + t_sendfile_offset, + t_sendfile_sendafter, + t_sendfile_recvafter, + t_sendfile_recvafter_remoteclose, + t_sendfile_sendduring, + t_sendfile_recvduring, + t_sendfile_closeduring, + t_sendfile_crashduring, + t_sendfile_arguments]. init_per_suite(Config) -> case {os:type(),os:version()} of @@ -72,28 +83,18 @@ init_per_suite(Config) -> end_per_suite(Config) -> file:delete(proplists:get_value(big_file, Config)). -init_per_group(async_threads,Config) -> - case erlang:system_info(thread_pool_size) of - 0 -> - {skip,"No async threads"}; - _ -> - [{sendfile_opts,[{use_threads,true}]}|Config] - end; -init_per_group(no_async_threads,Config) -> - [{sendfile_opts,[{use_threads,false}]}|Config]. - -end_per_group(_,_Config) -> - ok. - init_per_testcase(TC,Config) when TC == t_sendfile_recvduring; TC == t_sendfile_sendduring -> Filename = proplists:get_value(small_file, Config), Send = fun(Sock) -> {_Size, Data} = sendfile_file_info(Filename), - {ok,D} = file:open(Filename, [raw,binary,read]), - prim_file:sendfile(D, Sock, 0, 0, 0, - [],[],[]), + {ok,Fd} = file:open(Filename, [raw,binary,read]), + %% Determine whether the driver has native support by + %% hitting the raw module directly; file:sendfile/5 will + %% land in the fallback if it doesn't. + RawModule = Fd#file_descriptor.module, + {ok, _Ignored} = RawModule:sendfile(Fd,Sock,0,0,0,[],[],[]), Data end, @@ -105,9 +106,8 @@ init_per_testcase(TC,Config) when TC == t_sendfile_recvduring; ct:log("Error: ~p",[Error]), {skip,"Not supported"} end; -init_per_testcase(_Tc,Config) -> - Config ++ [{sendfile_opts,[{use_threads,false}]}]. - +init_per_testcase(_TC,Config) -> + Config. t_sendfile_small(Config) when is_list(Config) -> Filename = proplists:get_value(small_file, Config), @@ -124,7 +124,7 @@ t_sendfile_small(Config) when is_list(Config) -> t_sendfile_many_small(Config) when is_list(Config) -> Filename = proplists:get_value(small_file, Config), FileOpts = proplists:get_value(file_opts, Config, []), - SendfileOpts = proplists:get_value(sendfile_opts, Config), + SendfileOpts = proplists:get_value(sendfile_opts, Config, []), error_logger:add_report_handler(?MODULE,[self()]), @@ -151,7 +151,7 @@ t_sendfile_many_small(Config) when is_list(Config) -> t_sendfile_big_all(Config) when is_list(Config) -> Filename = proplists:get_value(big_file, Config), - SendfileOpts = proplists:get_value(sendfile_opts, Config), + SendfileOpts = proplists:get_value(sendfile_opts, Config, []), Send = fun(Sock) -> {ok, #file_info{size = Size}} = @@ -165,7 +165,7 @@ t_sendfile_big_all(Config) when is_list(Config) -> t_sendfile_big_size(Config) -> Filename = proplists:get_value(big_file, Config), FileOpts = proplists:get_value(file_opts, Config, []), - SendfileOpts = proplists:get_value(sendfile_opts, Config), + SendfileOpts = proplists:get_value(sendfile_opts, Config, []), SendAll = fun(Sock) -> {ok, #file_info{size = Size}} = @@ -180,7 +180,7 @@ t_sendfile_big_size(Config) -> t_sendfile_partial(Config) -> Filename = proplists:get_value(small_file, Config), FileOpts = proplists:get_value(file_opts, Config, []), - SendfileOpts = proplists:get_value(sendfile_opts, Config), + SendfileOpts = proplists:get_value(sendfile_opts, Config, []), SendSingle = fun(Sock) -> {_Size, <<Data:5/binary,_/binary>>} = @@ -217,7 +217,7 @@ t_sendfile_partial(Config) -> t_sendfile_offset(Config) -> Filename = proplists:get_value(small_file, Config), FileOpts = proplists:get_value(file_opts, Config, []), - SendfileOpts = proplists:get_value(sendfile_opts, Config), + SendfileOpts = proplists:get_value(sendfile_opts, Config, []), Send = fun(Sock) -> {_Size, <<_:5/binary,Data:3/binary,_/binary>> = AllData} = @@ -233,7 +233,7 @@ t_sendfile_offset(Config) -> t_sendfile_sendafter(Config) -> Filename = proplists:get_value(small_file, Config), - SendfileOpts = proplists:get_value(sendfile_opts, Config), + SendfileOpts = proplists:get_value(sendfile_opts, Config, []), Send = fun(Sock) -> {Size, Data} = sendfile_file_info(Filename), @@ -246,7 +246,7 @@ t_sendfile_sendafter(Config) -> t_sendfile_recvafter(Config) -> Filename = proplists:get_value(small_file, Config), - SendfileOpts = proplists:get_value(sendfile_opts, Config), + SendfileOpts = proplists:get_value(sendfile_opts, Config, []), Send = fun(Sock) -> {Size, Data} = sendfile_file_info(Filename), @@ -279,7 +279,7 @@ t_sendfile_recvafter_remoteclose(Config) -> t_sendfile_sendduring(Config) -> Filename = proplists:get_value(big_file, Config), - SendfileOpts = proplists:get_value(sendfile_opts, Config), + SendfileOpts = proplists:get_value(sendfile_opts, Config, []), Send = fun(Sock) -> {ok, #file_info{size = Size}} = @@ -296,7 +296,7 @@ t_sendfile_sendduring(Config) -> t_sendfile_recvduring(Config) -> Filename = proplists:get_value(big_file, Config), - SendfileOpts = proplists:get_value(sendfile_opts, Config), + SendfileOpts = proplists:get_value(sendfile_opts, Config, []), Send = fun(Sock) -> {ok, #file_info{size = Size}} = @@ -315,7 +315,7 @@ t_sendfile_recvduring(Config) -> t_sendfile_closeduring(Config) -> Filename = proplists:get_value(big_file, Config), - SendfileOpts = proplists:get_value(sendfile_opts, Config), + SendfileOpts = proplists:get_value(sendfile_opts, Config, []), Send = fun(Sock,SFServPid) -> spawn_link(fun() -> @@ -345,7 +345,7 @@ t_sendfile_closeduring(Config) -> t_sendfile_crashduring(Config) -> Filename = proplists:get_value(big_file, Config), - SendfileOpts = proplists:get_value(sendfile_opts, Config), + SendfileOpts = proplists:get_value(sendfile_opts, Config, []), error_logger:add_report_handler(?MODULE,[self()]), @@ -373,6 +373,36 @@ t_sendfile_crashduring(Config) -> end end. +t_sendfile_arguments(Config) -> + Filename = proplists:get_value(small_file, Config), + + {ok, Listener} = gen_tcp:listen(0, + [{packet, 0}, {active, false}, {reuseaddr, true}]), + {ok, Port} = inet:port(Listener), + + ErrorCheck = + fun(Reason, Offset, Length, Opts) -> + {ok, Sender} = gen_tcp:connect({127, 0, 0, 1}, Port, + [{packet, 0}, {active, false}]), + {ok, Receiver} = gen_tcp:accept(Listener), + {ok, Fd} = file:open(Filename, [read, raw]), + {error, Reason} = file:sendfile(Fd, Sender, Offset, Length, Opts), + gen_tcp:close(Receiver), + gen_tcp:close(Sender), + file:close(Fd) + end, + + ErrorCheck(einval, -1, 0, []), + ErrorCheck(einval, 0, -1, []), + ErrorCheck(badarg, gurka, 0, []), + ErrorCheck(badarg, 0, gurka, []), + ErrorCheck(badarg, 0, 0, gurka), + ErrorCheck(badarg, 0, 0, [{chunk_size, gurka}]), + + gen_tcp:close(Listener), + + ok. + %% Generic sendfile server code sendfile_send(Send) -> sendfile_send({127,0,0,1},Send). diff --git a/lib/kernel/test/zlib_SUITE.erl b/lib/kernel/test/zlib_SUITE.erl index 26602bdcda..f203ef878f 100644 --- a/lib/kernel/test/zlib_SUITE.erl +++ b/lib/kernel/test/zlib_SUITE.erl @@ -1061,32 +1061,27 @@ sub_heap_binaries(Config) when is_list(Config) -> %% Check concurrent access to zlib driver. smp(Config) -> - case erlang:system_info(smp_support) of - true -> - NumOfProcs = lists:min([8,erlang:system_info(schedulers)]), - io:format("smp starting ~p workers\n",[NumOfProcs]), - - %% Tests to run in parallel. - Funcs = - [zip_usage, gz_usage, compress_usage, dictionary_usage, - crc, adler], - - %% We get all function arguments here to avoid repeated parallel - %% file read access. - UsageArgs = - list_to_tuple([{F, ?MODULE:F({get_arg,Config})} || F <- Funcs]), - Parent = self(), - - WorkerFun = - fun() -> - worker(rand:uniform(9999), UsageArgs, Parent) - end, - - Pids = [spawn_link(WorkerFun) || _ <- lists:seq(1, NumOfProcs)], - wait_pids(Pids); - false -> - {skipped,"No smp support"} - end. + NumOfProcs = lists:min([8,erlang:system_info(schedulers)]), + io:format("smp starting ~p workers\n",[NumOfProcs]), + + %% Tests to run in parallel. + Funcs = + [zip_usage, gz_usage, compress_usage, dictionary_usage, + crc, adler], + + %% We get all function arguments here to avoid repeated parallel + %% file read access. + UsageArgs = + list_to_tuple([{F, ?MODULE:F({get_arg,Config})} || F <- Funcs]), + Parent = self(), + + WorkerFun = + fun() -> + worker(rand:uniform(9999), UsageArgs, Parent) + end, + + Pids = [spawn_link(WorkerFun) || _ <- lists:seq(1, NumOfProcs)], + wait_pids(Pids). worker(Seed, FnATpl, Parent) -> io:format("smp worker ~p, seed=~p~n",[self(),Seed]), |