diff options
Diffstat (limited to 'lib/megaco/doc/src/notes.xml')
| -rw-r--r-- | lib/megaco/doc/src/notes.xml | 1167 |
1 files changed, 1167 insertions, 0 deletions
diff --git a/lib/megaco/doc/src/notes.xml b/lib/megaco/doc/src/notes.xml new file mode 100644 index 0000000000..26c64f7c52 --- /dev/null +++ b/lib/megaco/doc/src/notes.xml @@ -0,0 +1,1167 @@ +<?xml version="1.0" encoding="latin1" ?> +<!DOCTYPE chapter SYSTEM "chapter.dtd"> + +<chapter> + <header> + <copyright> + <year>2000</year><year>2009</year> + <holder>Ericsson AB. All Rights Reserved.</holder> + </copyright> + <legalnotice> + The contents of this file are subject to the Erlang Public License, + Version 1.1, (the "License"); you may not use this file except in + compliance with the License. You should have received a copy of the + Erlang Public License along with this software. If not, it can be + retrieved online at http://www.erlang.org/. + + Software distributed under the License is distributed on an "AS IS" + basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + the License for the specific language governing rights and limitations + under the License. + + </legalnotice> + + <title>Megaco Release Notes</title> + <prepared>Lars Thorsén, Håkan Mattsson, Micael Karlberg</prepared> + <docno></docno> + <date></date> + <rev>%VSN%</rev> + <file>notes.xml</file> + </header> + <p>This document describes the changes made to the Megaco system + from version to version. The intention of this document is to + list all incompatibilities as well as all enhancements and + bugfixes for every release of Megaco. Each release of Megaco + thus constitutes one section in this document. The title of each + section is the version number of Megaco.</p> + + <section> + <title>Megaco 3.13</title> + + <p>Version 3.13 supports code replacement in runtime from/to + version 3.12 and 3.11.3.</p> + + <section> + <title>Improvements and new features</title> +<!-- + <p>-</p> +--> + + <list type="bulleted"> + <item> + <p>A minor optimization by using ets:update_element + instead of ets:insert for some table updates.</p> + <p>Own Id: OTP-8239</p> + <!-- <p>Aux Id: Seq 11332</p> --> + </item> + + <item> + <p>The documentation is now built with open source tools + (<em>xsltproc</em> and <em>fop</em>) that exists on most + platforms. One visible change is that the frames are removed.</p> + <p>Own Id: OTP-8249</p> + </item> + + </list> + + </section> + + <section> + <title>Fixed bugs and malfunctions</title> + <p>-</p> + +<!-- + <list type="bulleted"> + <item> + <p>Replacing obsolete guard tests.</p> + <p>Own Id: OTP-8164</p> + <p>Aux Id: Seq 11332</p> + </item> + + </list> +--> + + </section> + + <section> + <title>Incompatibilities</title> + <p>-</p> + +<!-- + <list type="bulleted"> + <item> + <p>For those implementing their own codec's, the new megaco_encoder + behaviour will require three more functions. See above for more + info. </p> + <p>Own Id: OTP-7168</p> + <p>Aux Id: Seq 10867</p> + </item> + + </list> +--> + + </section> + </section> <!-- 3.13 --> + + + <section> + <title>Megaco 3.12</title> + +<!-- + <p>Version 3.12 supports code replacement in runtime from/to + version 3.11.3.</p> +--> + + <section> + <title>Improvements and new features</title> +<!-- + <p>-</p> +--> + + <list type="bulleted"> + <item> + <p>Improve handling of async transaction reply. </p> + <p>For asynchronous requests, issued using + <seealso marker="megaco#cast">megaco:cast/3</seealso>, + the reply will be delivered using the + <seealso marker="megaco_user#trans_reply">handle_trans_reply/4,5</seealso> + callback function. </p> + <p>If a receiver of a request, issued using + <seealso marker="megaco#cast">megaco:cast/3</seealso>, + does not reply in time, megaco re-sends the request. + If the receiver of the request sends the reply at the same + time as megaco re-sends, it may also send a reply to the + resent request (thinking the first reply got lost). These + two replies may arrive more or less at the same time, + causing confusion. </p> + <p>In order to improve this situation, a number of + improvements have been done: </p> + <list type="bulleted"> + <item> + <p>When the first reply arrives, a timer, request-keep-alive, + is started. This timer is used to decide when to stop + accepting replies as legitimate. </p> + <p>The timeout time for the timer is specified by the + config option <em>request_keep_alive_timout</em>, + which can be set per + <seealso marker="megaco#ui_request_keep_alive_timeout">user</seealso> + or per + <seealso marker="megaco#ci_request_keep_alive_timeout">connection</seealso>. </p> + </item> + <item> + <p>We also keep track of how many replies has been received + (we do this as long as the request-keep-alive timer is + running). </p> + </item> + <item> + <p>Each reply that arrives while the request-keep-alive timer + is running (including the first) will be delivered using the + <seealso marker="megaco_user#trans_reply">handle_trans_reply/4,5</seealso> + callback function, but with the UserReply augmented to + include a serial number indicating which reply number this + is. + The <em>first</em> reply to arrive, + will be numbered <em>one (1)</em>. </p> + </item> + <item> + <p>Replies arriving after the timer has expired will be delivered + in the same way as before, using the + <seealso marker="megaco_user#unexpected_trans">handle_unexpected_trans/3,4</seealso> + callback function. </p> + </item> + <item> + <p>Note that if the timer was <em>not</em> configured, + megaco will act exactly as before! </p> + </item> + </list> + <p>Own Id: OTP-8183</p> + <p>Aux Id: Seq 11393</p> + </item> + + </list> + + </section> + + <section> + <title>Fixed bugs and malfunctions</title> +<!-- + <p>-</p> +--> + + <list type="bulleted"> + <item> + <p>If the megaco app received a transaction reply, for a request + issued using the + <seealso marker="megaco#call">call/3</seealso> function, from + the wrong remote entity (wrong MId)), megaco would still deliver + the reply (<seealso marker="megaco#call">call/3</seealso> + returnes) as if from the correct remote entity (right MId). </p> + <p>This has been changed so that the function now returns with + an error reason. </p> + <p>See <seealso marker="megaco#call">call/3</seealso> for more + info. </p> + <p>*** POTENTIAL INCOMPATIBILITY ***</p> + <p>Own Id: OTP-8212</p> + <p>Aux Id: Seq 11305</p> + </item> + + </list> + + </section> + + </section> <!-- 3.12 --> + + + <section> + <title>Megaco 3.11.3</title> + +<!-- + <p>Version 3.11.3 supports code replacement in runtime from/to + version 3.11.2, 3.11.1 and 3.11.</p> +--> + + <section> + <title>Improvements and new features</title> +<!-- + <p>-</p> +--> + + <list type="bulleted"> + <item> + <p>Replacing obsolete guard tests.</p> + <p>Own Id: OTP-8164</p> + <!-- <p>Aux Id: Seq 11332</p> --> + </item> + + <item> + <p>Added the config option + <seealso marker="megaco#ui_call_proxy_gc_timeout">call_proxy_gc_timeout</seealso> + to be able to control the way unexpected replies (when requests issued + via calls to <seealso marker="megaco#call">call/3</seealso>) + are handled. </p> + <p>See + <seealso marker="megaco#user_info">user_info/2</seealso>, + <seealso marker="megaco#conn_info">conn_info/2</seealso> and + <seealso marker="megaco#call">call/3</seealso> for more info. </p> + <p>Own Id: OTP-8167</p> + <p>Aux Id: Seq 11393</p> + </item> + + <item> + <p>Make flex scanner c89 compiler compliant.</p> + <p>Akira Kitada</p> + <p>Own Id: OTP-8191</p> + <!-- <p>Aux Id: Seq 11332</p> --> + </item> + + </list> + + </section> + + <section> + <title>Fixed bugs and malfunctions</title> + <p>-</p> + +<!-- + <list type="bulleted"> + <item> + <p>Replacing obsolete guard tests.</p> + <p>Own Id: OTP-8164</p> + <p>Aux Id: Seq 11332</p> + </item> + + </list> +--> + + </section> + + <section> + <title>Incompatibilities</title> + <p>-</p> + +<!-- + <list type="bulleted"> + <item> + <p>For those implementing their own codec's, the new megaco_encoder + behaviour will require three more functions. See above for more + info. </p> + <p>Own Id: OTP-7168</p> + <p>Aux Id: Seq 10867</p> + </item> + + </list> +--> + + </section> + </section> <!-- 3.11.3 --> + + + <section> + <title>Megaco 3.11.2</title> + + <p>Version 3.11.2 supports code replacement in runtime from/to + version 3.11.1 and 3.11.</p> + + <section> + <title>Improvements and new features</title> +<!-- + <p>-</p> +--> + + <list type="bulleted"> + <item> + <p>Megaco was unnecessarily strict when parsing the SDP + attribute <c>maxptime</c> (leading or trailing spaces + cased the value parse to fail). </p> + <p>This has been improved so that leading and trailing + spaces are stripped before parsing the value. + The same has been done for the attribute <c>ptime</c>.</p> + <p>Own Id: OTP-8123</p> + <p>Aux Id: Seq 11364</p> + </item> + + </list> + + </section> + + <section> + <title>Fixed bugs and malfunctions</title> + <p>-</p> + +<!-- + <list type="bulleted"> + <item> + <p>[text] The <em>unquoted</em> string BOTH was interpreted as the + <c>'BothToken'</c> token. This was a version 3 (prev3a, prev3b, + prev3c and v3) only. </p> + <p>Own Id: OTP-8114</p> + <p>Aux Id: Seq 11353</p> + </item> + + <item> + <p>The reply proxy could crash if the timeout time calculation + results in a negative number. This will result in a function + clause with resulting error report.</p> + <p>Own Id: OTP-8081</p> + <p>Aux Id: Seq 11332</p> + </item> + + </list> +--> + + </section> + + <section> + <title>Incompatibilities</title> + <p>-</p> + +<!-- + <list type="bulleted"> + <item> + <p>For those implementing their own codec's, the new megaco_encoder + behaviour will require three more functions. See above for more + info. </p> + <p>Own Id: OTP-7168</p> + <p>Aux Id: Seq 10867</p> + </item> + + </list> +--> + + </section> + </section> <!-- 3.11.2 --> + + + <section> + <title>Megaco 3.11.1</title> + + <p>Version 3.11.1 supports code replacement in runtime from/to + version 3.11.</p> + + <section> + <title>Improvements and new features</title> + <p>-</p> + +<!-- + <list type="bulleted"> + <item> + <p>In order to better utilize multi-core procs, the + <c>flex</c> (text) scanner has been improved. </p> + <p>The <c>flex</c> (text) scanner has been made reentrant, + <em>if</em> the flex utility supports this. Note that the version + of <c>flex</c> supplied with some OS/distros (Solaris 10, + FreeBSD and OpenBSD to mention a few) may not support this, in which + case the flex scanner will be non-reentrant, just as before. </p> + <p>Own Id: OTP-7302</p> + </item> + + </list> +--> + + </section> + + <section> + <title>Fixed bugs and malfunctions</title> +<!-- + <p>-</p> +--> + + <list type="bulleted"> + <item> + <p>[text] The <em>unquoted</em> string BOTH was interpreted as the + <c>'BothToken'</c> token. This was a version 3 (prev3a, prev3b, + prev3c and v3) only. </p> + <p>Own Id: OTP-8114</p> + <p>Aux Id: Seq 11353</p> + </item> + + <item> + <p>The reply proxy could crash if the timeout time calculation + results in a negative number. This will result in a function + clause with resulting error report.</p> + <p>Own Id: OTP-8081</p> + <p>Aux Id: Seq 11332</p> + </item> + + </list> + + </section> + + <section> + <title>Incompatibilities</title> + <p>-</p> + +<!-- + <list type="bulleted"> + <item> + <p>For those implementing their own codec's, the new megaco_encoder + behaviour will require three more functions. See above for more + info. </p> + <p>Own Id: OTP-7168</p> + <p>Aux Id: Seq 10867</p> + </item> + + </list> +--> + + </section> + </section> <!-- 3.11.1 --> + + + <section> + <title>Megaco 3.11</title> + +<!-- + <p>Version 3.11 supports code replacement in runtime from/to + version 3.10.1 and 3.10.0.1.</p> +--> + + <section> + <title>Improvements and new features</title> +<!-- + <p>-</p> +--> + + <list type="bulleted"> + <item> + <p>In order to better utilize multi-core procs, the + <c>flex</c> (text) scanner has been improved. </p> + <p>The <c>flex</c> (text) scanner has been made reentrant, + <em>if</em> the flex utility supports this. Note that the version + of <c>flex</c> supplied with some OS/distros (Solaris 10, + FreeBSD and OpenBSD to mention a few) may not support this, in which + case the flex scanner will be non-reentrant, just as before. </p> + <p>Own Id: OTP-7302</p> + </item> + + </list> + </section> + + <section> + <title>Fixed bugs and malfunctions</title> + <p>-</p> + +<!-- + <list type="bulleted"> + <item> + <p>The (plain) text scanner could incorrectly identify + character strings (any 17 char long string with the + char t in the middle) as a TimeStampToken.</p> + <p>Own Id: OTP-7249</p> + <p>Aux Id: Seq 10917</p> + </item> + + </list> +--> + + </section> + + <section> + <title>Incompatibilities</title> + <p>-</p> + +<!-- + <list type="bulleted"> + <item> + <p>For those implementing their own codec's, the new megaco_encoder + behaviour will require three more functions. See above for more + info. </p> + <p>Own Id: OTP-7168</p> + <p>Aux Id: Seq 10867</p> + </item> + + </list> +--> + + </section> + </section> <!-- 3.11 --> + + + <section> + <title>Megaco 3.10.1</title> + + <p>Version 3.10.1 supports code replacement in runtime from/to + version 3.10.0.1, 3.10 and 3.9.4.</p> + + <section> + <title>Improvements and new features</title> + <p>-</p> + +<!-- + <list type="bulleted"> + <item> + <p>Updated file headers.</p> + <p>Own Id: OTP-7851</p> + <p>Aux Id: Seq 11140</p> + </item> + + </list> +--> + </section> + + <section> + <title>Fixed bugs and malfunctions</title> +<!-- + <p>-</p> +--> + + <list type="bulleted"> + <item> + <p>Unexpected <seealso marker="megaco_user#unexpected_trans">handle_unexpected_reply</seealso> callbacks. </p> + <p>The <seealso marker="megaco_user">megaco_user</seealso> callback function + <seealso marker="megaco_user#unexpected_trans">handle_unexpected_reply</seealso> + could during high load be called with unexpected values for the Trans + argument, such as an <c>TransactionReply</c> where <c>transactionResult</c> + had the value <c>{error, timeout}</c>. This was a result of a raise condition + and has now been fixed. </p> + <p>Own Id: OTP-7926</p> + <p>Aux Id: Seq 11255</p> + </item> + + <item> + <p>[text] PropertyParm values cannot be quoted. </p> + <p>It was not possible to encode a PropertyParm value as a quoted string + (unless it *had* to (has at least one RestChar)). The megaco text codec's + now also accepts quoted strings as PropertyParm values. </p> + <p>Own Id: OTP-7936</p> + <p>Aux Id: Seq 11258</p> + </item> + + </list> + + </section> + + <section> + <title>Incompatibilities</title> + <p>-</p> + +<!-- + <list type="bulleted"> + <item> + <p>If the transport module calls the + <seealso marker="megaco#process_received_message">process_received_message/5</seealso> + or + <seealso marker="megaco#receive_message">receive_message/5</seealso> + function(s) for the initial message, then the + <seealso marker="megaco_user#connect">handle_connect/3</seealso> + function will now be called and not the + <seealso marker="megaco_user#connect">handle_connect/2</seealso> + function. </p> + <p>Own Id: OTP-7713</p> + <p>Aux Id: Seq 11140</p> + </item> + + </list> +--> + + </section> + </section> <!-- 3.10.1 --> + + + <section> + <title>Megaco 3.10.0.1</title> + + <p>Version 3.10.0.1 supports code replacement in runtime from/to + version 3.10 and 3.9.4 except + when using any of the drivers (flex for text or asn1 for binary).</p> + + <section> + <title>Improvements and new features</title> +<!-- + <p>-</p> +--> + + <list type="bulleted"> + <item> + <p>Updated file headers.</p> + <p>Own Id: OTP-7851</p> + <!-- <p>Aux Id: Seq 11140</p> --> + </item> + + </list> + </section> + + <section> + <title>Fixed bugs and malfunctions</title> + <p>-</p> + +<!-- + <list type="bulleted"> + <item> + <p>Memory leak in the flex scanner. There was a memory + leak in the flex scanner function handling + Property Parameters. </p> + <p>Own Id: OTP-7700</p> + <p>Aux Id: Seq 11126</p> + </item> + + </list> +--> + + </section> + + <section> + <title>Incompatibilities</title> + <p>-</p> + +<!-- + <list type="bulleted"> + <item> + <p>If the transport module calls the + <seealso marker="megaco#process_received_message">process_received_message/5</seealso> + or + <seealso marker="megaco#receive_message">receive_message/5</seealso> + function(s) for the initial message, then the + <seealso marker="megaco_user#connect">handle_connect/3</seealso> + function will now be called and not the + <seealso marker="megaco_user#connect">handle_connect/2</seealso> + function. </p> + <p>Own Id: OTP-7713</p> + <p>Aux Id: Seq 11140</p> + </item> + + </list> +--> + + </section> + </section> <!-- 3.10.0.1 --> + + + <section> + <title>Megaco 3.10</title> + + <p>Version 3.10 supports code replacement in runtime from/to + version 3.9.4, 3.9.3, 3.9.2, 3.9.1.1, 3.9.1, 3.9, 3.8.2, 3.8.1 and 3.8 except + when using any of the drivers (flex for text or asn1 for binary).</p> + + <section> + <title>Improvements and new features</title> +<!-- + <p>-</p> +--> + + <list type="bulleted"> + <item> + <p>Added new API function + <seealso marker="megaco#connect">megaco:connect/5</seealso> and + the corresponding new <c>megaco_user</c> callback function + <seealso marker="megaco_user#connect">handle_connect/3</seealso>. + The purpose of this is to be able to pass information to the + <seealso marker="megaco_user#connect">handle_connect/3</seealso> + function by calling the + <seealso marker="megaco#connect">megaco:connect/5</seealso> + function. </p> + <p>Own Id: OTP-7713</p> + <p>Aux Id: Seq 11140</p> + </item> + + <item> + <p>Update file headers with new copyright notice. </p> + <p>Own Id: OTP-7743</p> + </item> + + </list> + </section> + + <section> + <title>Fixed bugs and malfunctions</title> + <p>-</p> + +<!-- + <list type="bulleted"> + <item> + <p>Memory leak in the flex scanner. There was a memory + leak in the flex scanner function handling + Property Parameters. </p> + <p>Own Id: OTP-7700</p> + <p>Aux Id: Seq 11126</p> + </item> + + </list> +--> + + </section> + + <section> + <title>Incompatibilities</title> +<!-- + <p>-</p> +--> + + <list type="bulleted"> + <item> + <p>If the transport module calls the + <seealso marker="megaco#process_received_message">process_received_message/5</seealso> + or + <seealso marker="megaco#receive_message">receive_message/5</seealso> + function(s) for the initial message, then the + <seealso marker="megaco_user#connect">handle_connect/3</seealso> + function will now be called and not the + <seealso marker="megaco_user#connect">handle_connect/2</seealso> + function. </p> + <p>Own Id: OTP-7713</p> + <p>Aux Id: Seq 11140</p> + </item> + + </list> + + </section> + </section> <!-- 3.10 --> + + + <section> + <title>Megaco 3.9.4</title> + + <p>Version 3.9.4 supports code replacement in runtime from/to + version 3.9.3, 3.9.2, 3.9.1.1, 3.9.1, 3.9, 3.8.2, 3.8.1 and 3.8 except + when using any of the drivers (flex for text or asn1 for binary).</p> + + <section> + <title>Improvements and new features</title> + <p>-</p> + +<!-- + <list type="bulleted"> + <item> + <p>Miscellaneous dialyzer related and test case cleanup. </p> + <p>Own Id: OTP-7614</p> + </item> + + </list> +--> + </section> + + <section> + <title>Fixed bugs and malfunctions</title> +<!-- + <p>-</p> +--> + + <list type="bulleted"> + <item> + <p>Segmenting a reply failed (with a badmatch) if the message + did not actually need to be segmented (e.g. was within the + size limit, + <seealso marker="megaco#ui_max_pdu_size">max_pdu_size</seealso>). </p> + <p>Own Id: OTP-7733</p> + <p>Aux Id: Seq 11168</p> + </item> + + <item> + <p>Improve the error handling of megaco_tcp for received + messages. </p> + <p>Own Id: OTP-7728</p> + </item> + + </list> + + </section> + + <section> + <title>Incompatibilities</title> + <p>-</p> + +<!-- + <list type="bulleted"> + <item> + <p>For those implementing their own codec's, the new megaco_encoder + behaviour will require three more functions. See above for more + info. </p> + <p>Own Id: OTP-7168</p> + <p>Aux Id: Seq 10867</p> + </item> + + </list> +--> + + </section> + </section> <!-- 3.9.3.1 --> + + + <section> + <title>Megaco 3.9.3</title> + + <p>Version 3.9.3 supports code replacement in runtime from/to + version 3.9.2, 3.9.1.1, 3.9.1, 3.9, 3.8.2, 3.8.1 and 3.8 except + when using any of the drivers (flex for text or asn1 for binary).</p> + + <section> + <title>Improvements and new features</title> + <p>-</p> + +<!-- + <list type="bulleted"> + <item> + <p>Miscellaneous dialyzer related and test case cleanup. </p> + <p>Own Id: OTP-7614</p> + </item> + + </list> +--> + </section> + + <section> + <title>Fixed bugs and malfunctions</title> +<!-- + <p>-</p> +--> + + <list type="bulleted"> + <item> + <p>Memory leak in the flex scanner. There was a memory + leak in the flex scanner function handling + Property Parameters. </p> + <p>Own Id: OTP-7700</p> + <p>Aux Id: Seq 11126</p> + </item> + + </list> + + </section> + + <section> + <title>Incompatibilities</title> + <p>-</p> + +<!-- + <list type="bulleted"> + <item> + <p>For those implementing their own codec's, the new megaco_encoder + behaviour will require three more functions. See above for more + info. </p> + <p>Own Id: OTP-7168</p> + <p>Aux Id: Seq 10867</p> + </item> + + </list> +--> + + </section> + </section> <!-- 3.9.3 --> + + + <section> + <title>Megaco 3.9.2</title> + + <p>Version 3.9.2 supports code replacement in runtime from/to + version 3.9.1.1, 3.9.1, 3.9, 3.8.2, 3.8.1 and 3.8 except + when using any of the drivers (flex for text or asn1 for binary).</p> + + <section> + <title>Improvements and new features</title> + <p>-</p> + +<!-- + <list type="bulleted"> + <item> + <p>Miscellaneous dialyzer related and test case cleanup. </p> + <p>Own Id: OTP-7614</p> + </item> + + </list> +--> + </section> + + <section> + <title>Fixed bugs and malfunctions</title> +<!-- + <p>-</p> +--> + + <list type="bulleted"> + <item> + <p>The text encoders (v1, v2, v3, ...) all failed to + properly encode the DigitMapDescriptor. </p> + <p>Own Id: OTP-7671</p> + <p>Aux Id: Seq 11113</p> + </item> + + <item> + <p>The mini decoder some time incorrectly identifies + plain text as tokens. </p> + <p>Own Id: OTP-7672</p> + <p>Aux Id: Seq 11103</p> + </item> + + </list> + + </section> + + <section> + <title>Incompatibilities</title> + <p>-</p> + +<!-- + <list type="bulleted"> + <item> + <p>For those implementing their own codec's, the new megaco_encoder + behaviour will require three more functions. See above for more + info. </p> + <p>Own Id: OTP-7168</p> + <p>Aux Id: Seq 10867</p> + </item> + + </list> +--> + + </section> + </section> <!-- 3.9.2 --> + + + <section> + <title>Megaco 3.9.1.1</title> + + <p>Version 3.9.1.1 supports code replacement in runtime from/to + version 3.9.1, 3.9, 3.8.2, 3.8.1 and 3.8 except + when using any of the drivers (flex for text or asn1 for binary).</p> + + <section> + <title>Improvements and new features</title> +<!-- + <p>-</p> +--> + + <list type="bulleted"> + <item> + <p>Miscellaneous dialyzer related and test case cleanup. </p> + <p>Own Id: OTP-7614</p> + </item> + + </list> + </section> + + <section> + <title>Fixed bugs and malfunctions</title> + <p>-</p> + +<!-- + <list type="bulleted"> + <item> + <p>[text] The flex scanner did not allow an empty quotedString + in propertyParm. </p> + <p>Own Id: OTP-7573</p> + <p>Aux Id: Seq 11062</p> + </item> + + <item> + <p>[text] Unable to decode a version 2 message with a + topologyTriple containing an (optional) eventStream. </p> + <p>Own Id: OTP-7576</p> + <p>Aux Id: Seq 11066</p> + </item> + + </list> +--> + + </section> + + <section> + <title>Incompatibilities</title> + <p>-</p> + +<!-- + <list type="bulleted"> + <item> + <p>For those implementing their own codec's, the new megaco_encoder + behaviour will require three more functions. See above for more + info. </p> + <p>Own Id: OTP-7168</p> + <p>Aux Id: Seq 10867</p> + </item> + + </list> +--> + + </section> + </section> <!-- 3.9.1.1 --> + + + <section> + <title>Megaco 3.9.1</title> + + <p>Version 3.9.1 supports code replacement in runtime from/to + version 3.9, 3.8.2, 3.8.1 and 3.8 except + when using any of the drivers (flex for text or asn1 for binary).</p> + + <section> + <title>Improvements and new features</title> + <p>-</p> + +<!-- + <list type="bulleted"> + <item> + <p>[text] The text codec(s) has been optimized. The parsing of + "property parameters" has been moved to the scanner(s). Which means + that when decoding messages containing property parameters, using + the flex scanner, decode time(s) will be reduced. The reduction + depends on the message, but can be as large as 25%. </p> + <p>Own Id: OTP-7431</p> + </item> + + </list> +--> + </section> + + <section> + <title>Fixed bugs and malfunctions</title> +<!-- + <p>-</p> +--> + + <list type="bulleted"> + <item> + <p>[text] The flex scanner did not allow an empty quotedString + in propertyParm. </p> + <p>Own Id: OTP-7573</p> + <p>Aux Id: Seq 11062</p> + </item> + + <item> + <p>[text] Unable to decode a version 2 message with a + topologyTriple containing an (optional) eventStream. </p> + <p>Own Id: OTP-7576</p> + <p>Aux Id: Seq 11066</p> + </item> + + </list> + + </section> + + <section> + <title>Incompatibilities</title> + <p>-</p> + +<!-- + <list type="bulleted"> + <item> + <p>For those implementing their own codec's, the new megaco_encoder + behaviour will require three more functions. See above for more + info. </p> + <p>Own Id: OTP-7168</p> + <p>Aux Id: Seq 10867</p> + </item> + + </list> +--> + + </section> + </section> <!-- 3.9.1 --> + + + <section> + <title>Megaco 3.9</title> + + <p>Version 3.9 supports code replacement in runtime from/to + version 3.8.2, 3.8.1 and 3.8 except + when using any of the drivers (flex for text or asn1 for binary).</p> + + <section> + <title>Improvements and new features</title> +<!-- + <p>-</p> +--> + + <list type="bulleted"> + <item> + <p>[text] The text codec(s) has been optimized. The parsing of + "property parameters" has been moved to the scanner(s). Which means + that when decoding messages containing property parameters, using + the flex scanner, decode time(s) will be reduced. The reduction + depends on the message, but can be as large as 25%. </p> + <p>Own Id: OTP-7431</p> + </item> + + </list> + </section> + + <section> + <title>Fixed bugs and malfunctions</title> + <p>-</p> + +<!-- + <list type="bulleted"> + <item> + <p>If a TransactionRequest arrives while a user is + connecting (is in the callback function + handle_connect as a result of a megaco:connect call), + megaco responds with a pending message and then drops + the request.</p> + <p>These messages will now be silently dropped, forcing the + other side to resend. </p> + <p>Own Id: OTP-7192</p> + <p>Aux Id: Seq 10884</p> + </item> + + </list> +--> + + </section> + + <section> + <title>Incompatibilities</title> + <p>-</p> + +<!-- + <list type="bulleted"> + <item> + <p>For those implementing their own codec's, the new megaco_encoder + behaviour will require three more functions. See above for more + info. </p> + <p>Own Id: OTP-7168</p> + <p>Aux Id: Seq 10867</p> + </item> + + </list> +--> + + </section> + </section> <!-- 3.9 --> + + + <!-- section> + <title>Release notes history</title> + <p>For information about older versions see + <url href="part_notes_history_frame.html">release notes history</url>.</p + </section> --> +</chapter> + |