diff options
Diffstat (limited to 'lib/otp_mibs/mibs/OTP-EVA-MIB.mib')
| -rw-r--r-- | lib/otp_mibs/mibs/OTP-EVA-MIB.mib | 569 |
1 files changed, 0 insertions, 569 deletions
diff --git a/lib/otp_mibs/mibs/OTP-EVA-MIB.mib b/lib/otp_mibs/mibs/OTP-EVA-MIB.mib deleted file mode 100644 index 4d0c53ed95..0000000000 --- a/lib/otp_mibs/mibs/OTP-EVA-MIB.mib +++ /dev/null @@ -1,569 +0,0 @@ --- --- %CopyrightBegin% --- --- Copyright Ericsson AB 2004-2016. All Rights Reserved. --- --- Licensed under the Apache License, Version 2.0 (the "License"); --- you may not use this file except in compliance with the License. --- You may obtain a copy of the License at --- --- http://www.apache.org/licenses/LICENSE-2.0 --- --- Unless required by applicable law or agreed to in writing, software --- distributed under the License is distributed on an "AS IS" BASIS, --- WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. --- See the License for the specific language governing permissions and --- limitations under the License. --- --- %CopyrightEnd% --- - -OTP-EVA-MIB DEFINITIONS ::= BEGIN - -IMPORTS - MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE, - Counter32, Gauge32, Integer32 - FROM SNMPv2-SMI - TEXTUAL-CONVENTION, DisplayString, DateAndTime - FROM SNMPv2-TC - MODULE-COMPLIANCE, OBJECT-GROUP, NOTIFICATION-GROUP - FROM SNMPv2-CONF - otpModules, otpApplications - FROM OTP-REG - OwnerString - FROM OTP-TC - ; - -otpEvaModule MODULE-IDENTITY - LAST-UPDATED "200305090900Z" - ORGANIZATION "Ericsson" - CONTACT-INFO - "Contact: Erlang Support see license agreement for Erlang/OTP." - DESCRIPTION - "This MIB is part of the OTP MIB. It defines MIB objects - for the eva application in OTP." - - REVISION "200305090900Z" - DESCRIPTION - "Changed CONTACT-INFO as it was outdated, made it more generic - to avoid such changes in the future." - - REVISION "199801270900Z" - DESCRIPTION - "Changed erroneous defintion of alarmCleared notification. - Changed erroneous name of this module to otpEvaModule." - REVISION "199712010900Z" - DESCRIPTION - "Converted to v2 SMI and placed in the OTP tree." - REVISION "199705020900Z" - DESCRIPTION - "The initial version of this MIB module. It is very much - inspired by the ANS-ALM-MIB and Axd301Eva-OMS mibs." - ::= { otpModules 6 } - -otpEvaMIB OBJECT IDENTIFIER ::= { otpApplications 4 } -otpEvaMIBConformance - OBJECT IDENTIFIER ::= { otpEvaMIB 1 } -otpEvaMIBObjects - OBJECT IDENTIFIER ::= { otpEvaMIB 2 } -otpEvaMIBEvents OBJECT IDENTIFIER ::= { otpEvaMIB 3 } -otpEvaMIBEventsV2 - OBJECT IDENTIFIER ::= { otpEvaMIBEvents 0 } - - --- Datatypes - -AlarmSeverity ::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION - "The AlarmSeverity defines six severity levels, - which provide an indication of how it is perceived that the - capability of the managed object has been affected. Those - severity levels which represent service affecting conditions - ordered from most severe to least severe are critical, - major, minor and warning. The levels used are as defined - in X.733, ITU Alarm Reporting Function: - - o The Indeterminate severity level indicates that the - severity level cannot be determined. - - o The Critical severity level indicates that a service - affecting condition has occurred and an immediate - corrective action is required. Such a severity can be - reported, for example, when a managed object becomes - totally out of service and its capability must be restored. - - o The Major severity level indicates that a service - affecting condition has developed and an urgent corrective - action is required. Such a severity can be reported, for - example, when there is a severe degradation in the - capability of the managed object and its full capability - must be restored. - - o The Minor severity level indicates the existence of a - non-service affecting fault condition and that corrective - action should be taken in order to prevent a more serious - (for example, service affecting) fault. Such a severity - can be reported, for example, when the detected alarm - condition is not currently degrading the capacity of the - managed object. - - o The Warning severity level indicates the detection of a - potential or impending service affecting fault, before any - significant effects have been felt. Action should be taken - to further diagnose (if necessary) and correct the problem - in order to prevent it from becoming a more serious service - affecting fault. - - When an alarm is cleared, an alarmCleared event is generated. - This event clears the alarm with the currentAlarmFaultId - contained in the event. It is not required that the clearing - of previously reported alarms are reported. Therefore, a managing - system cannot assume that the absence of an alarmedCleared event - for a fault means that the condition that caused the generation - of previous alarms is still present. Managed object definers - shall state if, and under which conditions, the alarmedCleared - event is used. - - The clear value of AlarmSeverity is an action which is used when - a management station wants to clear an active alarm. This is not - possible on all systems, and thus an agent does not have support - write access for this value." - REFERENCE - "X.733, ITU Alarm Reporting Function" - SYNTAX INTEGER { - indeterminate (0), - critical (1), - major (2), - minor (3), - warning (4), - clear (5) -- Written, not read - } - -AlarmClass ::= TEXTUAL-CONVENTION - STATUS current - DESCRIPTION - "The AlarmClass type categorizes the alarm, and is - defined when the alarm is registered. It is as defined in - X.733, ITU Alarm Reporting Function: - - o communications. An alarm of this class is principally - associated with the procedures or processes required - to convey information from one point to another. - - o qos. An alarm of this class is principally associated - with a degradation in the quality of service. - - o processing. An alarm of this class is principally - associated with a software or processing fault. - - o equipment. An alarm of this class is principally - associated with an equipment fault. - - o environmental. An alarm of this class is principally - associated with a condition relating to an enclosure in - with equipment resides." - REFERENCE - "X.733, ITU Alarm Reporting Function" - SYNTAX INTEGER { - unknown (0), - communications (1), - qos (2), - processing (3), - equipment (4), - environmental (5) - } - - --- Managed Objects - -event OBJECT IDENTIFIER ::= { otpEvaMIBObjects 1 } -alarm OBJECT IDENTIFIER ::= { otpEvaMIBObjects 2 } -currentAlarm OBJECT IDENTIFIER ::= { otpEvaMIBObjects 3 } - --- The Event group --- --- The Event group controls the generation of notifications of --- events from the system. - -eventTable OBJECT-TYPE - SYNTAX SEQUENCE OF EventEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A list of events defined by the system. This table is used - to control the sending of traps and to whom the traps are - sent." - ::= { event 1 } - -eventEntry OBJECT-TYPE - SYNTAX EventEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A set of parameters that describe an event to be - generated when certain conditions are met." - INDEX { eventIndex } - ::= { eventTable 1 } - -EventEntry ::= SEQUENCE { - eventIndex Integer32 (1..2147483647), - eventTrapName DisplayString, - eventTreatment INTEGER, - eventCommunity OCTET STRING (SIZE (0..127)), - eventSentTraps Counter32, - eventOwner OwnerString - } - -eventIndex OBJECT-TYPE - SYNTAX Integer32 (1..2147483647) - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "An index that uniquely identifies an entry in the - event table. Each such entry defines one event that - is to be generated when the appropriate conditions - occur. The value for each eventIndex must remain - constant, at least from one re-initialization of the - entity's network management system to the next - re-initialization." - ::= { eventEntry 1 } - -eventTrapName OBJECT-TYPE - SYNTAX DisplayString - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The identifier of the corresponding trap. - NOTE: this should be an OID in SNMPv2, but must be - a string in v1." - ::= { eventEntry 2 } - -eventTreatment OBJECT-TYPE - SYNTAX INTEGER { - none(1), - log(2), - snmpTrap(3), - logAndTrap(4) - } - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "Defines how the system shall treat this event. In the - case of snmpTrap, an SNMP trap is sent to one or more - management stations. In the case of log, the event is - guaranteed to be logged in a log according to some log - strategy. Each such log strategy may define a MIB module - for control and examination of logs." - ::= { eventEntry 3 } - -eventCommunity OBJECT-TYPE - SYNTAX OCTET STRING (SIZE (0..127)) - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "If an SNMP trap is to be sent, it will be sent to - the SNMP community specified by this octet string." - ::= { eventEntry 4 } - -eventSentTraps OBJECT-TYPE - SYNTAX Counter32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The number of times this event has been sent as a trap." - ::= { eventEntry 5 } - -eventOwner OBJECT-TYPE - SYNTAX OwnerString - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The manager entity that 'owns' this event entry, and is - therefore responsible for its contents." - ::= { eventEntry 6 } - -eventTime OBJECT-TYPE - SYNTAX DateAndTime - MAX-ACCESS accessible-for-notify - STATUS current - DESCRIPTION - "This object may be included in a trap definition for an event. - It specifies the time the event was generated." - ::= { event 2 } - - --- The Alarm group --- --- The Alarm group extends the Event group with objects for alarms. - -alarmTable OBJECT-TYPE - SYNTAX SEQUENCE OF AlarmEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "Contains additional information for alarm events." - ::= { alarm 1 } - -alarmEntry OBJECT-TYPE - SYNTAX AlarmEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A set of parameters for alarms." - INDEX { eventIndex } - ::= { alarmTable 1 } - -AlarmEntry ::= SEQUENCE { - alarmClass AlarmClass, - alarmSeverity AlarmSeverity - } - -alarmClass OBJECT-TYPE - SYNTAX AlarmClass - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The class of this alarm." - ::= { alarmEntry 1 } - -alarmSeverity OBJECT-TYPE - SYNTAX AlarmSeverity - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The perceived severity that shall apply to the - associated alarms." - ::= { alarmEntry 2 } - - --- The CurrentAlarm group --- --- The CurrentAlarm group is a collection of objects for monitoring of --- active alarms in the system. - -numberOfCurrentAlarms OBJECT-TYPE - SYNTAX Gauge32 - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Number of currently active alarms in the system." - ::= { currentAlarm 1 } - -currentAlarmLastTimeChanged OBJECT-TYPE - SYNTAX DateAndTime - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The time an entry in the currentAlarmTable was changed. - It may be used by a management station as a value to - poll. If the value is changed, the management station - knows that the currentAlarmTable has been updated." - ::= { currentAlarm 2 } - -currentAlarmTable OBJECT-TYPE - SYNTAX SEQUENCE OF CurrentAlarmEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A list of currently active alarms in the system." - ::= { currentAlarm 3 } - -currentAlarmEntry OBJECT-TYPE - SYNTAX CurrentAlarmEntry - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "A set of parameters that describe a currently active - alarm." - INDEX { currentAlarmFaultId } - ::= { currentAlarmTable 1 } - -CurrentAlarmEntry ::= SEQUENCE { - currentAlarmFaultId Integer32 (1..2147483647), - currentAlarmEventIndex Integer32 (1..2147483647), - currentAlarmObject OBJECT IDENTIFIER, - currentAlarmCause OBJECT IDENTIFIER, - currentAlarmSeverity AlarmSeverity, - currentAlarmTime DateAndTime, - currentAlarmInformation DisplayString, - currentAlarmExtra1 OBJECT IDENTIFIER, - currentAlarmExtra2 OBJECT IDENTIFIER - } - -currentAlarmFaultId OBJECT-TYPE - SYNTAX Integer32 (1..2147483647) - MAX-ACCESS not-accessible - STATUS current - DESCRIPTION - "An id that uniquely identifies a fault. Each fault is - represented as one an entry in the currentAlarmTable." - ::= { currentAlarmEntry 1 } - -currentAlarmEventIndex OBJECT-TYPE - SYNTAX Integer32 (1..2147483647) - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "A pointer into the eventTable. Points to the event - corresponding to this alarm." - ::= { currentAlarmEntry 2 } - -currentAlarmObject OBJECT-TYPE - SYNTAX OBJECT IDENTIFIER - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The alarming object." - ::= { currentAlarmEntry 3 } - -currentAlarmCause OBJECT-TYPE - SYNTAX OBJECT IDENTIFIER - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The probable cause of the alarm." - ::= { currentAlarmEntry 4 } - -currentAlarmSeverity OBJECT-TYPE - SYNTAX AlarmSeverity - MAX-ACCESS read-write - STATUS current - DESCRIPTION - "The perceived severity of the fault. A manager can set - this value to clear only. When set to clear, the alarm - is removed from this table, and a 'clearAlarm' event is - generated." - ::= { currentAlarmEntry 5 } - -currentAlarmTime OBJECT-TYPE - SYNTAX DateAndTime - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "The time the fault was detected." - ::= { currentAlarmEntry 6 } - -currentAlarmInformation OBJECT-TYPE - SYNTAX DisplayString - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "Additional information pin-pointing the problem." - ::= { currentAlarmEntry 7 } - -currentAlarmExtra1 OBJECT-TYPE - SYNTAX OBJECT IDENTIFIER - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "An extra parameter used for some alarms at their own - discretion. Can be used for example to identify - additional objects in the alarm, or instead of - currentAlarmInformation to pin-point the problem, if the - additional information is defined in some MIB." - ::= { currentAlarmEntry 8 } - -currentAlarmExtra2 OBJECT-TYPE - SYNTAX OBJECT IDENTIFIER - MAX-ACCESS read-only - STATUS current - DESCRIPTION - "An extra parameter used for some alarms at their own - discretion. Can be used for example to identify - additional objects in the alarm, or instead of - currentAlarmInformation to pin-point the problem, if the - additional information is defined in some MIB." - ::= { currentAlarmEntry 9 } - - --- Events - -alarmCleared NOTIFICATION-TYPE - OBJECTS { - currentAlarmEventIndex, - eventTime - } - STATUS current - DESCRIPTION - "This event is sent when an alarm has been cleared, - either by the application or by an operator. Note that the - currentAlarmFaultId is implicitly sent as the instance identifier - for currentAlarmEventIndex." - ::= { otpEvaMIBEventsV2 1 } - - --- conformance information - -otpEvaMIBCompliances - OBJECT IDENTIFIER ::= { otpEvaMIBConformance 1 } -otpEvaMIBGroups - OBJECT IDENTIFIER ::= { otpEvaMIBConformance 2 } - - --- compliance statements - -otpEvaBasicCompliance MODULE-COMPLIANCE - STATUS current - DESCRIPTION - "The compliance statement for SNMPv2 entities which - implement the OTP-EVA-MIB." - MODULE -- this module - MANDATORY-GROUPS { eventGroup, - alarmGroup, - currentAlarmGroup, - evaEventsGroup } - - ::= { otpEvaMIBCompliances 1 } - - --- units of conformance - -eventGroup OBJECT-GROUP - OBJECTS { eventTrapName, - eventTreatment, - eventCommunity, - eventSentTraps, - eventOwner, - eventTime } - STATUS current - DESCRIPTION - "A collection of objects providing basic instrumentation - and control of the events defined in the OTP system." - ::= { otpEvaMIBGroups 1 } - -alarmGroup OBJECT-GROUP - OBJECTS { alarmClass, - alarmSeverity } - STATUS current - DESCRIPTION - "A collection of objects providing basic instrumentation - and control of the alarms defined the OTP system." - ::= { otpEvaMIBGroups 2 } - -currentAlarmGroup OBJECT-GROUP - OBJECTS { numberOfCurrentAlarms, - currentAlarmLastTimeChanged, - currentAlarmEventIndex, - currentAlarmObject, - currentAlarmCause, - currentAlarmSeverity, - currentAlarmTime, - currentAlarmInformation, - currentAlarmExtra1, - currentAlarmExtra2 } - STATUS current - DESCRIPTION - "A collection of objects providing basic instrumentation - of the activa alarm list in the OTP system." - ::= { otpEvaMIBGroups 3 } - -evaEventsGroup NOTIFICATION-GROUP - NOTIFICATIONS { alarmCleared } - STATUS current - DESCRIPTION - "The notification which is generated from EVA." - ::= { otpEvaMIBGroups 4 } - - -END |