diff options
Diffstat (limited to 'lib/sasl/test/release_handler_SUITE.erl')
-rw-r--r-- | lib/sasl/test/release_handler_SUITE.erl | 1911 |
1 files changed, 1911 insertions, 0 deletions
diff --git a/lib/sasl/test/release_handler_SUITE.erl b/lib/sasl/test/release_handler_SUITE.erl new file mode 100644 index 0000000000..9c7733b7ec --- /dev/null +++ b/lib/sasl/test/release_handler_SUITE.erl @@ -0,0 +1,1911 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2011. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% +%% +-module(release_handler_SUITE). + +-include_lib("common_test/include/ct.hrl"). + +-compile(export_all). + +% Default timetrap timeout (set in init_per_testcase). +%-define(default_timeout, ?t:minutes(40)). +-define(default_timeout, ?t:minutes(10)). + +suite() -> + [{ct_hooks, [ts_install_cth]}]. + +init_per_suite(Config) -> + application:start(sasl), + Config. + +end_per_suite(_Config) -> + ok. + +all() -> + case os:type() of + {unix, _} -> unix_cases(); + {win32, _} -> win32_cases() + end. + +unix_cases() -> + RunErl = filename:join([code:root_dir(),"bin","run_erl"]), + RunErlCases = case filelib:is_file(RunErl) of + true -> [{group, release}]; + false -> [no_run_erl] + end, + [target_system] ++ RunErlCases ++ cases(). + +win32_cases() -> + [{group,release} | cases()]. + +%% Cases that can be run on all platforms +cases() -> + [otp_2740, otp_2760, otp_5761, otp_9402, otp_9417, instructions, eval_appup]. + +groups() -> + [{release,[], + [ + {group,release_single}, + {group,release_gg} + ]}, + {release_single,[], + [ + upgrade, + client1, + client2 + ]}, + {release_gg,[], + [ + upgrade_gg + ]}]. + +%% {group,release} +%% Top group for all cases using run_erl +init_per_group(release, Config) -> + Dog = ?t:timetrap(?default_timeout), + P1gInstall = filename:join(priv_dir(Config),p1g_install), + ok = do_create_p1g(Config,P1gInstall), + ok = create_p1h(Config), + ?t:timetrap_cancel(Dog); + +%% {group,release_single} +%% Subgroup of {group,release}, contains all cases that are not +%% related to global_group +init_per_group(release_single, Config) -> + Dog = ?t:timetrap(?default_timeout), + + %% Create some more releases to upgrade to + ok = create_p1i(Config), + ok = create_p2a(Config), + + ?t:timetrap_cancel(Dog); + +%% {group,release_gg} +%% Subgroup of {group,release}. global_group tests. +init_per_group(release_gg, Config0) -> + Config = [{sname_prefix,release_gg}|Config0], + + PrivDir = priv_dir(Config), + Dog = ?t:timetrap(?default_timeout), + + reg_print_proc(), %% starts a printer process on this node + + Snames = [Gg1Sname,Gg2Sname,Gg3Sname,Gg4Sname,Gg5Sname,Gg6Sname] = + gg_node_snames(Config), + + %% kill all possible nodes which are to be used + ok = stop_nodes([node_name(Sname) || Sname <- Snames]), + + %% For gg1, gg3, gg4 and gg5: create a target system running + %% P1G, and with P1H unpacked. + %% For gg2 and gg6: create a target system running P1H. + %% Use gg2 for unpacking and permanenting P1H. + ok = copy_installed(Config,p1g_install,[Gg2Sname]), + InstallNode = unpack_p1h(Config,Gg2Sname), + ok = copy_installed(Config,Gg2Sname,[Gg1Sname,Gg3Sname,Gg4Sname,Gg5Sname]), + ok = permanent_p1h(InstallNode), + ok = stop_nodes([InstallNode]), + ok = copy_installed(Config,Gg2Sname,[Gg6Sname]), + + %% Replace the sys.config files + %% The reason for not creating the releases with these configs in + %% the first place (create_p1g, create_p1h) is that then the + %% InstallNode (gg2) will be very slow started since it will try + %% to synch with the other nodes in the global group. + %% Also, the rpc call for installing the P1H release (in + %% permanent_p1h/1) would return {rpc,nodedown} due to change of + %% global groups. + lists:foreach( + fun(Sname) -> + ReleasesDir = filename:join([PrivDir,Sname,"releases"]), + write_term_file(filename:join([ReleasesDir,"P1G","sys.config"]), + gg_config([Gg1Sname,Gg3Sname,Gg4Sname,Gg5Sname])), + write_term_file(filename:join([ReleasesDir,"P1H","sys.config"]), + gg_config([Gg1Sname,Gg2Sname,Gg4Sname, + Gg5Sname,Gg6Sname])) + end, + Snames), + + ?t:timetrap_cancel(Dog), + [{snames,Snames}|Config]. + + +end_per_group(release, Config) -> + Dog = ?t:timetrap(?default_timeout), + stop_print_proc(), + case os:type() of + {win32,_} -> delete_all_services(); + _ -> ok + end, + delete_release(Config), + ?t:timetrap_cancel(Dog), + Config; +end_per_group(_GroupName, Config) -> + Config. + + +init_per_testcase(Case, Config0) -> + Dog = test_server:timetrap(?default_timeout), + Config = [{sname_prefix,Case},{watchdog, Dog}|Config0], + try apply(?MODULE,Case,[cleanup,Config]) + catch error:undef -> ok + end, + ?t:format("~n======= init_per_testcase done =======~n",[]), + Config. + +end_per_testcase(Case, Config) -> + ?t:format("~n======= start end_per_testcase =======~n",[]), + Dog=?config(watchdog, Config), + test_server:timetrap_cancel(Dog), + + try apply(?MODULE,Case,[cleanup,Config]) + catch error:undef -> ok + end, + + %% DEBUG + case ?config(tc_status,Config) of + ok -> + ok; + _Fail -> + %% save logs from master and client nodes + PrivDir = priv_dir(Config), + SaveDir = filename:join(PrivDir,save), + FailDir = filename:join(SaveDir,lists:concat(["failed-",Case])), + ok = filelib:ensure_dir(filename:join(FailDir,"*")), + + LogDirs = filelib:wildcard(filename:join([PrivDir,"*",log])), + + lists:foreach( + fun(LogDir) -> + ["log",Sname|_] = lists:reverse(filename:split(LogDir)), + copy_tree(Config,LogDir,Sname,FailDir) + end, + LogDirs), + + case filelib:is_file("sasl_erl_crash.dump") of + true -> + copy_file("sasl_erl_crash.dump",FailDir); + _ -> + ok + end + + end, + %% End DEBUG + + %% Remove any remaining sasl_erl_crash.dump + %% These can occur when a new master@<host> is started, before + %% the old usage of the name is unregistered, causing the node to + %% terminate. (This has no effect on the test case, as the node is + %% immediately restarted by heart and the test cases wait until + %% the node is actually up and running -- see wait_nodes_up/2) + file:delete("sasl_erl_crash.dump"), + ok. + +gg_node_snames(Config) -> + [tc_sname(Config,X) || X <- [gg1,gg2,gg3,gg4,gg5,gg6]]. + + +%%%----------------------------------------------------------------- +%%% TEST CASES + + +%% Executed instead of release group when no run_erl program exists +no_run_erl(Config) when is_list(Config) -> + {comment, "No run_erl program"}. + +break(Config) -> + erlang:display(test_break), + ?t:break(priv_dir(Config)), + ok. + +%% Test upgrade and downgrade of erts +upgrade(Conf) when is_list(Conf) -> + reg_print_proc(), %% starts a printer process on test_server node + ?t:format("upgrade ~p~n",[reg_print_proc]), + PrivDir = priv_dir(Conf), + Sname = tc_sname(Conf), % nodename for use in this testcase + + %% Copy the P1G release to a directory for use in this testcase + ok = copy_installed(Conf,p1g_install,[Sname]), + + %% start the test node + [TestNode] = start_nodes(Conf,[Sname],"upgrade start"), + + %% unpack and install P1H + ok = rpc_inst(TestNode, install_1, [PrivDir]), + stop_cover(TestNode), + reboot_and_wait(TestNode,"install_1"), + + %% reinstall P1H and make it permanent + ok = rpc_inst(TestNode, install_2, []), + stop_cover(TestNode), + reboot_and_wait(TestNode,"install_2",[a]), + + %% check that P1H is permanent, unpack and install P1I, unpack and install P2A + TestNodeInit1 = rpc:call(TestNode,erlang,whereis,[init]), + ok = rpc_inst(TestNode, install_3, [PrivDir]), + stop_cover(TestNode), + ok = rpc_inst(TestNode, install_3a, []), + wait_nodes_up([{TestNode,TestNodeInit1}],"install_3",[a]), + + %% check that P2A is used, reboot from P1I + ok = rpc_inst(TestNode, install_4, []), + stop_cover(TestNode), + reboot_and_wait(TestNode,"install_4",[a]), + + %% check that P1I, reinstall P2A + TestNodeInit2 = rpc:call(TestNode,erlang,whereis,[init]), + ok = rpc_inst(TestNode, install_5, []), + stop_cover(TestNode), + ok = rpc_inst(TestNode, install_5a, []), + wait_nodes_up([{TestNode,TestNodeInit2}],"install_5",[a]), + + %% check that P2A is used, make P2A permanent + ok = rpc_inst(TestNode, install_6, []), + stop_cover(TestNode), + reboot_and_wait(TestNode,"install_6",[a]), + + %% check that P2A is permanent, install old P1H + TestNodeInit3 = rpc:call(TestNode,erlang,whereis,[init]), + stop_cover(TestNode), + ok = rpc_inst(TestNode, install_7, []), + wait_nodes_up([{TestNode,TestNodeInit3}],"install_7",[a]), + + %% check that P1H is permanent, remove P1I and P2A + ok = rpc_inst(TestNode, install_8, []), + stop_cover(TestNode), + reboot_and_wait(TestNode,"install_8",[a]), + + %% check that P1H is permanent, reboot old P1G + TestNodeInit4 = rpc:call(TestNode,erlang,whereis,[init]), + stop_cover(TestNode), + ok = rpc_inst(TestNode, install_9, []), + wait_nodes_up([{TestNode,TestNodeInit4}],"install_9"), + + %% check that P1G is permanent, remove P1H + ok = rpc_inst(TestNode, install_10, []), + stop_cover(TestNode), + reboot_and_wait(TestNode,"install_10"), + + %% check that P1G is permanent + ok = rpc_inst(TestNode, install_11, []), + + ok. + +upgrade(cleanup,Config) -> + TestNode = tc_full_node_name(Config), + ok = stop_nodes([TestNode]). + +reboot_and_wait(Node,Tag) -> + reboot_and_wait(Node,Tag,[]). + +reboot_and_wait(Node,Tag,Apps) -> + InitPid = rpc:call(Node,erlang,whereis,[init]), + ok = rpc:call(Node,init,reboot,[]), + wait_nodes_up([{Node,InitPid}],Tag,Apps). + + +%% Test upgrade and downgrade of erts, diskless +client1(Conf) when is_list(Conf) -> + reg_print_proc(), %% starts a printer process on test_server node + PrivDir = priv_dir(Conf), + Master = tc_sname(Conf,master), + Client = tc_sname(Conf,client), + MasterDir = filename:join(PrivDir,Master), + + %% Copy the P1G release to a directory for use in this testcase + ok = copy_installed(Conf,p1g_install,[Master]), + ok = copy_client(Conf,Master,Client,client1), + + %% start the master node + [TestNode] = start_nodes(Conf,[Master],"client1"), + + ok = rpc_inst(TestNode, client1_1, [PrivDir,MasterDir,Client]), + + ok. + +client1(cleanup,Config) -> + MasterNode = tc_full_node_name(Config,master), + ClientNode = tc_full_node_name(Config,client), + ok = stop_nodes([MasterNode,ClientNode]). + + + +%% Test diskless release handling when illegal master node +client2(Conf) when is_list(Conf) -> + reg_print_proc(), %% starts a printer process on test_server node + PrivDir = priv_dir(Conf), + Master = tc_sname(Conf,master), + Client = tc_sname(Conf,client), + + %% Copy the P1G release to a directory for use in this testcase + ok = copy_installed(Conf,p1g_install,[Master]), + ok = copy_client(Conf,Master,Client,client2), + + %% start the master node + [TestNode] = start_nodes(Conf,[Master],"client2"), + + ok = rpc_inst(TestNode, client2, [PrivDir,Client]), + + ok. + +client2(cleanup,Config) -> + MasterNode = tc_full_node_name(Config,master), + ClientNode = tc_full_node_name(Config,client), + ok = stop_nodes([MasterNode,ClientNode]). + + + +%% Test instructions _not_ tested by the installer module. +instructions(Conf) when is_list(Conf) -> + DataDir = ?config(data_dir, Conf), + + Dir = filename:join(DataDir, "c"), + true = code:add_path(Dir), + check_bstate("no", []), + ok = application:start(c), + ok = wait_for(bb), + check_bstate("first", []), + FirstBB = whereis(bb), + + case whereis(cc) of + Pid when is_pid(Pid) -> ok; + _ -> ?t:fail("cc not started") + end, + + %% Stop and start cc process + S1 = [point_of_no_return, + {stop, [aa]}, + {apply, {?MODULE, no_cc, []}}, + {start, [aa]}], + {ok, _} = release_handler_1:eval_script(S1), + + case whereis(cc) of + Pid2 when is_pid(Pid2) -> ok; + _ -> ?t:fail("cc not started") + end, + + %% Make bb run old version of b. + S2 = [point_of_no_return, + {remove, {b, soft_purge, soft_purge}}], + {ok, [{b, soft_purge}]} = release_handler_1:eval_script(S2), + check_bstate("first", [FirstBB]), + + false = code:is_loaded(b), + {error,{old_processes,b}} = release_handler_1:eval_script(S2), + check_bstate("first", [FirstBB]), + + %% Let supervisor restart bb with new code + S3 = [point_of_no_return, + {purge, [b]}], + {ok, []} = release_handler_1:eval_script(S3), + ok = wait_for(bb), + check_bstate("second", []), + SecondBB = whereis(bb), + + if + SecondBB =:= FirstBB -> ?t:fail("bb not killed"); + true -> ok + end, + + %% Restart bb yet another time + ok = application:stop(c), + ok = application:start(c), + ok = wait_for(bb), + check_bstate("third", []), + ThirdBB = whereis(bb), + + case ThirdBB of + _ when is_pid(ThirdBB) -> ok; + undefined -> ?t:fail("bb not started") + end, + + %% Make bb run old version of b. + %%c:l(b), + check_bstate("third", []), + false = code:purge(b), + check_bstate("third", []), + {module,b} = code:load_file(b), + check_bstate("third", [ThirdBB]), + + %% Let supervisor restart bb yet another time + S4 = [point_of_no_return, + {remove, {b, brutal_purge, soft_purge}}], + {ok, HopefullyEmpty} = release_handler_1:eval_script(S4), + ok = wait_for(bb), + FourthBB = whereis(bb), + + case HopefullyEmpty of + [{b, soft_purge}] -> + %% The process managed to start between purge and delete + check_bstate("fourth", [FourthBB]); + [] -> + %% The process started after delete + check_bstate("fourth", []) + end, + + application:stop(c), + check_bstate("no", []), + ok. + +instructions(cleanup,Conf) -> + application:stop(c), + really_del_code([aa,b,c_sup]), + code:del_path(filename:join(?config(data_dir,Conf), "c")), + ok. + +really_del_code(Mods) -> + lists:foreach(fun(Mod) -> + code:purge(Mod), % remove old code + code:delete(Mod),% make current code old + code:purge(Mod) % remove old code + end, + Mods). + +check_bstate(Slogan,ExpectedProcs) -> + BB = whereis(bb), + ActualProcs = lists:sort([P || P <- processes(), + erlang:check_process_code(P, b)]), + ExpectedProcs2 = lists:sort(ExpectedProcs), + ?t:format("check_bstate:~n~p~n~p~n", + [{"bb process", Slogan, BB}, + {"Processes running old b code", ActualProcs}]), + if + Slogan =:= "no", BB =/= undefined -> + ?t:fail("instructions failed; process bb is running"); + Slogan =/= "no", BB =:= undefined -> + ?t:fail("instructions failed; process bb is not running"); + ExpectedProcs2 =:= [], ActualProcs =/= ExpectedProcs2 -> + ?t:fail("instructions failed; old b processes are running"); + ActualProcs =/= ExpectedProcs2 -> + ?t:fail("instructions failed; wrong number of old b processes are running"); + true -> + ok + end. + +wait_for(Name) -> + case whereis(Name) of + undefined -> + timer:sleep(100), + wait_for(Name); + Pid when is_pid(Pid) -> + ok + end. + +no_cc() -> + case whereis(cc) of + Pid when is_pid(Pid) -> ?t:fail("cc not stopped"); + _ -> ok + end. + + + +%%%----------------------------------------------------------------- +%%% Testing of reported bugs and other tickets. +%%%----------------------------------------------------------------- + +%%----------------------------------------------------------------- +%% Ticket: OTP-2740 +%% Slogan: vsn not numeric doesn't work so good in release_handling +%%----------------------------------------------------------------- +%% Test vsn. +otp_2740(Conf) -> + DataDir = ?config(data_dir, Conf), + Dir = filename:join(DataDir, "otp_2740"), + true = code:add_path(Dir), + + {module, vsn_numeric} = c:l(vsn_numeric), + {module, vsn_tuple} = c:l(vsn_tuple), + {module, vsn_list} = c:l(vsn_list), + {module, vsn_atom} = c:l(vsn_atom), + {module, vsn_string} = c:l(vsn_string), + + 231894 = release_handler_1:get_current_vsn(vsn_numeric), + {tuple,["of",terms]} = release_handler_1:get_current_vsn(vsn_tuple), + [list,"of",{some,terms}] = release_handler_1:get_current_vsn(vsn_list), + atom = release_handler_1:get_current_vsn(vsn_atom), + "a string" = release_handler_1:get_current_vsn(vsn_string), + + true = code:del_path(Dir), + ok. + +%%----------------------------------------------------------------- +%% Ticket: OTP-2760 +%% Slogan: when an application is removed from a node it is not unloaded +%%----------------------------------------------------------------- +%% Test that when an application is removed from a node it is also unloaded. +otp_2760(Conf) -> + PrivDir = priv_dir(Conf), + Dir = filename:join(PrivDir,"otp_2760"), + DataDir = ?config(data_dir,Conf), + LibDir = filename:join([DataDir,app1_app2,lib1]), + + Rel1 = create_and_install_fake_first_release(Dir,[{app1,"1.0",LibDir}]), + Rel2 = create_fake_upgrade_release(Dir,"after",[],{Rel1,Rel1,[LibDir]}), + Rel2Dir = filename:dirname(Rel2), + + %% Start a node with Rel1.boot and check that the app1 module is loaded + {ok, Node} = t_start_node(otp_2760, Rel1, []), + {file, _} = rpc:call(Node, code, is_loaded, [app1]), + + %% Execute the relup script and check that app1 is unloaded + {ok, [{"after", [{_Rel1Vsn, _Descr, Script}], _}]} = + file:consult(filename:join(Rel2Dir, "relup")), + {ok, []} = rpc:call(Node, release_handler_1, eval_script, [Script]), + false = rpc:call(Node, code, is_loaded, [app1]), + + true = stop_node(Node), + ok. + +%% Test upgrade using other filesystem than the defined in OTP and +%% option {update_paths, true} +otp_5761(Conf) when is_list(Conf) -> + + %% In the following test case, the release upgrade is somewhat + %% simplified (since it is not this procedure in itself we want to + %% test, but that application code directories are set correctly.) + %% Existing Erlang release is used as base, instead of creating + %% a new one. + + %% Set some paths + PrivDir = priv_dir(Conf), + Dir = filename:join(PrivDir,"otp_5761"), + RelDir = filename:join(?config(data_dir, Conf), "app1_app2"), + LibDir1 = filename:join(RelDir, "lib1"), + LibDir2 = filename:join(RelDir, "lib2"), + + %% Create the releases + Rel1 = create_and_install_fake_first_release(Dir, + [{app1,"1.0",LibDir1}, + {app2,"1.0",LibDir1}]), + Rel2 = create_fake_upgrade_release(Dir, + "2", + [{app1,"2.0",LibDir2}, + {app2,"1.0",LibDir2}], + {Rel1,Rel1,[LibDir1]}), + Rel1Dir = filename:dirname(Rel1), + Rel2Dir = filename:dirname(Rel2), + + %% Start a slave node + {ok, Node} = t_start_node(otp_5761, Rel1, filename:join(Rel1Dir,"sys.config")), + + %% Bind some variable names that will be used in patternmatching below + App11Dir = filename:join([LibDir1, "app1-1.0"]), + App12Dir = filename:join([LibDir2, "app1-2.0"]), + App2aDir = filename:join([LibDir1, "app2-1.0"]), + App2bDir = filename:join([LibDir2, "app2-1.0"]), + + %% Make sure correct code paths are used + App11Dir = rpc:call(Node, code, lib_dir, [app1]), + App2aDir = rpc:call(Node, code, lib_dir, [app2]), + + %% Unpack rel2 (make sure it does not work if an AppDir is bad) + LibDir3 = filename:join(RelDir, "lib3"), + {error, {no_such_directory, _}} = + rpc:call(Node, release_handler, set_unpacked, + [Rel2++".rel", [{app1,"2.0",LibDir2}, {app2,"1.0",LibDir3}]]), + {ok, RelVsn2} = + rpc:call(Node, release_handler, set_unpacked, + [Rel2++".rel", [{app1,"2.0",LibDir2}, {app2,"1.0",LibDir2}]]), + ok = rpc:call(Node, release_handler, install_file, + [RelVsn2, filename:join(Rel2Dir, "relup")]), + ok = rpc:call(Node, release_handler, install_file, + [RelVsn2, filename:join(Rel2Dir, "start.boot")]), + ok = rpc:call(Node, release_handler, install_file, + [RelVsn2, filename:join(Rel2Dir, "sys.config")]), + + %% Install RelVsn2 without {update_paths, true} option + {ok, RelVsn1, []} = + rpc:call(Node, release_handler, install_release, [RelVsn2]), + App12Dir = rpc:call(Node, code, lib_dir, [app1]), + App2aDir = rpc:call(Node, code, lib_dir, [app2]), + + %% Install RelVsn1 again + {ok, RelVsn1, []} = + rpc:call(Node, release_handler, install_release, [RelVsn1]), + + %% Install RelVsn2 with {update_paths, true} option + {ok, RelVsn1, []} = + rpc:call(Node, release_handler, install_release, + [RelVsn2, [{update_paths, true}]]), + App12Dir = rpc:call(Node, code, lib_dir, [app1]), + App2bDir = rpc:call(Node, code, lib_dir, [app2]), + + %% Install RelVsn1 again + {ok, RelVsn1, []} = + rpc:call(Node, release_handler, install_release, + [RelVsn1, [{update_paths, true}]]), + App11Dir = rpc:call(Node, code, lib_dir, [app1]), + App2aDir = rpc:call(Node, code, lib_dir, [app2]), + + %% Stop the slave node + true = stop_node(Node), + ok. + + +%% When a new version of an application is added, but no module is +%% changed - the path was not updated - i.e. code:priv_dir would point +%% to the old location. +otp_9402(Conf) when is_list(Conf) -> + %% Set some paths + PrivDir = priv_dir(Conf), + Dir = filename:join(PrivDir,"otp_9402"), + LibDir = filename:join(?config(data_dir, Conf), "lib"), + + %% Create the releases + Rel1 = create_and_install_fake_first_release(Dir, + [{a,"1.1",LibDir}]), + Rel2 = create_fake_upgrade_release(Dir, + "2", + [{a,"1.2",LibDir}], + {Rel1,Rel1,[LibDir]}), + Rel1Dir = filename:dirname(Rel1), + Rel2Dir = filename:dirname(Rel2), + + %% Start a slave node + {ok, Node} = t_start_node(otp_9402, Rel1, filename:join(Rel1Dir,"sys.config")), + + %% Check path + Dir1 = filename:join([LibDir, "a-1.1"]), + Dir1 = rpc:call(Node, code, lib_dir, [a]), + ABeam = rpc:call(Node, code, which, [a]), + + %% Install second release, with no changed modules + {ok, RelVsn2} = + rpc:call(Node, release_handler, set_unpacked, + [Rel2++".rel", [{a,"1.2",LibDir}]]), + ok = rpc:call(Node, release_handler, install_file, + [RelVsn2, filename:join(Rel2Dir, "relup")]), + ok = rpc:call(Node, release_handler, install_file, + [RelVsn2, filename:join(Rel2Dir, "start.boot")]), + ok = rpc:call(Node, release_handler, install_file, + [RelVsn2, filename:join(Rel2Dir, "sys.config")]), + + {ok, RelVsn1, []} = + rpc:call(Node, release_handler, install_release, [RelVsn2]), + + %% Check path + Dir2 = filename:join([LibDir, "a-1.2"]), + Dir2 = rpc:call(Node, code, lib_dir, [a]), + APrivDir2 = rpc:call(Node, code, priv_dir, [a]), + true = filelib:is_regular(filename:join(APrivDir2,"file")), + + %% Just to make sure no modules have been re-loaded + ABeam = rpc:call(Node, code, which, [a]), + + %% Install RelVsn1 again + {ok, _OtherVsn, []} = + rpc:call(Node, release_handler, install_release, [RelVsn1]), + + %% Check path + Dir1 = rpc:call(Node, code, lib_dir, [a]), + APrivDir1 = rpc:call(Node, code, priv_dir, [a]), + false = filelib:is_regular(filename:join(APrivDir1,"file")), + + %% Just to make sure no modules have been re-loaded + ABeam = rpc:call(Node, code, which, [a]), + + ok. + + +%% When a module is deleted in an appup instruction, the upgrade +%% failed if the module was not loaded. +otp_9417(Conf) when is_list(Conf) -> + %% Set some paths + PrivDir = priv_dir(Conf), + Dir = filename:join(PrivDir,"otp_9417"), + LibDir = filename:join(?config(data_dir, Conf), "lib"), + + %% Create the releases + Rel1 = create_and_install_fake_first_release(Dir, + [{b,"1.0",LibDir}]), + Rel2 = create_fake_upgrade_release(Dir, + "2", + [{b,"2.0",LibDir}], + {Rel1,Rel1,[LibDir]}), + Rel1Dir = filename:dirname(Rel1), + Rel2Dir = filename:dirname(Rel2), + + %% Start a slave node + {ok, Node} = t_start_node(otp_9417, Rel1, filename:join(Rel1Dir,"sys.config")), + + %% Check paths + Dir1 = filename:join([LibDir, "b-1.0"]), + Dir1 = rpc:call(Node, code, lib_dir, [b]), + BLibBeam = filename:join([Dir1,"ebin","b_lib.beam"]), + BLibBeam = rpc:call(Node,code,which,[b_lib]), + false = rpc:call(Node,code,is_loaded,[b_lib]), + false = rpc:call(Node,code,is_loaded,[b_server]), + + %% Install second release, which removes b_lib module + {ok, RelVsn2} = + rpc:call(Node, release_handler, set_unpacked, + [Rel2++".rel", [{b,"2.0",LibDir}]]), + ok = rpc:call(Node, release_handler, install_file, + [RelVsn2, filename:join(Rel2Dir, "relup")]), + ok = rpc:call(Node, release_handler, install_file, + [RelVsn2, filename:join(Rel2Dir, "start.boot")]), + ok = rpc:call(Node, release_handler, install_file, + [RelVsn2, filename:join(Rel2Dir, "sys.config")]), + + {ok, _RelVsn1, []} = + rpc:call(Node, release_handler, install_release, [RelVsn2]), + + %% Check that the module does no longer exist + false = rpc:call(Node, code, is_loaded, [b_lib]), + non_existing = rpc:call(Node, code, which, [b_lib]), + + %% And check some paths + Dir2 = filename:join([LibDir, "b-2.0"]), + Dir2 = rpc:call(Node, code, lib_dir, [b]), + BServerBeam = filename:join([Dir2,"ebin","b_server.beam"]), + {file,BServerBeam} = rpc:call(Node,code,is_loaded,[b_server]), + ok. + +%% Test upgrade and downgrade of applications +eval_appup(Conf) when is_list(Conf) -> + + %% OTP-6162 + %% Create an ETS table which is updated by app1 if there is any + %% change made to the application configuration parameter 'var' + %% (see config_change/3 in myrel/lib1|2/app1-1|2.0/src/app1.erl) + ets:new(otp_6162, [set, public, named_table]), + + %% Set some paths + RelDir = filename:join(?config(data_dir, Conf), "app1_app2"), + App11Dir = filename:join([RelDir, "lib1", "app1-1.0"]), + App12Dir = filename:join([RelDir, "lib2", "app1-2.0"]), + EbinDir = filename:join(App11Dir, "ebin"), + + %% Start app1-1.0 + code:add_patha(EbinDir), + ok = application:start(app1), + App11Dir = code:lib_dir(app1), + ok = gen_server:call(harry, error), + + %% Upgrade to app1-2.0 + {ok, []} = release_handler:upgrade_app(app1, App12Dir), + App12Dir = code:lib_dir(app1), + error = gen_server:call(harry, error), + + %% OTP-6162 + %% Value of config parameter 'var' should now be 'val2' + %% (see myrel/lib2/app1-2.0/ebin/app1.app) + [{var,val2}] = ets:lookup(otp_6162, var), + + %% Downgrade to app1-1.0 + {ok, []} = release_handler:downgrade_app(app1,"1.0",App11Dir), + App11Dir = code:lib_dir(app1), + ok = gen_server:call(harry, error), + + %% OTP-6162 + %% Value of config parameter 'var' should now be 'val1' + %% (see myrel/lib1/app1-1.0/ebin/app1.app) + [{var,val1}] = ets:lookup(otp_6162, var), + + ok = application:stop(app1), + ok = application:unload(app1), + + true = code:del_path(EbinDir), + ok. + + +%% Test the example/target_system.erl module +target_system(Conf) when is_list(Conf) -> + PrivDir = priv_dir(Conf), + DataDir = ?config(data_dir,Conf), + + TargetCreateDir = filename:join([PrivDir,"target_system","create"]), + TargetInstallDir = filename:join([PrivDir,"target_system","install"]), + + ok = filelib:ensure_dir(filename:join(TargetCreateDir,"xx")), + ok = filelib:ensure_dir(filename:join(TargetInstallDir,"xx")), + + + %% Create the .rel file + ErtsVsn = erlang:system_info(version), + RelName = filename:join(TargetCreateDir,"ts-1.0"), + RelFile = RelName++".rel", + RelVsn = "R1A", + create_rel_file(RelFile,RelName,RelVsn,ErtsVsn,[{a, "1.0"}]), + + %% Build the target_system module + ExamplesEbin = filename:join([code:lib_dir(sasl),examples,ebin]), + TSPath = + case filelib:is_file(filename:join(ExamplesEbin,"target_system.beam")) of + true -> + ExamplesEbin; + false -> + {ok,_} = + compile:file(filename:join(DataDir,"target_system.erl"), + [{outdir,TargetCreateDir}]), + TargetCreateDir + end, + code:add_path(TSPath), + + %% Create the release + target_system:create(RelName,[{path,[filename:join([DataDir, + lib, + "a-1.0", + ebin])]}]), + + %% Install the release + target_system:install(RelName,TargetInstallDir), + + code:del_path(TSPath), + + %% Check that all files exist in installation + true = filelib:is_dir(filename:join(TargetInstallDir,"erts-"++ErtsVsn)), + LibDir = filename:join(TargetInstallDir,lib), + {ok,KernelVsn} = application:get_key(kernel,vsn), + {ok,StdlibVsn} = application:get_key(stdlib,vsn), + {ok,SaslVsn} = application:get_key(sasl,vsn), + true = filelib:is_dir(filename:join(LibDir,"kernel-"++KernelVsn)), + true = filelib:is_dir(filename:join(LibDir,"stdlib-"++StdlibVsn)), + true = filelib:is_dir(filename:join(LibDir,"sasl-"++SaslVsn)), + true = filelib:is_dir(filename:join(LibDir,"a-1.0")), + RelDir = filename:join(TargetInstallDir,releases), + true = filelib:is_regular(filename:join(RelDir,"RELEASES")), + true = filelib:is_regular(filename:join(RelDir,"start_erl.data")), + true = filelib:is_regular(filename:join(RelDir, + filename:basename(RelFile))), + true = filelib:is_dir(filename:join(RelDir,RelVsn)), + true = filelib:is_regular(filename:join([RelDir,RelVsn,"start.boot"])), + BinDir = filename:join(TargetInstallDir,bin), + true = filelib:is_regular(filename:join(BinDir,"start.boot")), + true = filelib:is_regular(filename:join(BinDir,erl)), + true = filelib:is_regular(filename:join(BinDir,start_erl)), + true = filelib:is_regular(filename:join(BinDir,start)), + true = filelib:is_regular(filename:join(BinDir,epmd)), + true = filelib:is_regular(filename:join(BinDir,run_erl)), + true = filelib:is_regular(filename:join(BinDir,to_erl)), + + %% Check content of files + {ok,SED} = file:read_file(filename:join(RelDir,"start_erl.data")), + [ErtsVsn,RelVsn] = string:tokens(binary_to_list(SED),"\s\n"), + ok. + + + +%%%================================================================= +%%% Testing global groups. +%%%================================================================= + +%% This test case involves P1G and P1H with the sys.config as +%% specified in gg_config/1. The test case checks that the global +%% group information is correct before and after the upgrade and also +%% after terminating one of the nodes. The flow is as follows: +%% 1. Start all four nodes of global group gg1 with P1G +%% 2. Terminate one of the nodes, and upgrade the others to P1H. P1H +%% config adds to more nodes to the global group. +%% 3. Start the two remaining nodes with P1H +upgrade_gg(Conf) -> + [Gg1Sname,Gg2Sname,Gg3Sname,Gg4Sname,Gg5Sname,Gg6Sname] = + ?config(snames,Conf), + + %% start gg1, gg3, gg4, gg5 and check that global group info is ok + Nodes1 = [Gg1,Gg3,Gg4,Gg5] = + start_nodes(Conf,[Gg1Sname,Gg3Sname,Gg4Sname,Gg5Sname],"upgrade_gg"), + + %% Give some time to synch nodes, then check global group info. + timer:sleep(1000), + [check_gg_info(Node,Nodes1,[],Nodes1--[Node]) || Node <- Nodes1], + + %% register a process on each of the nodes + ok = rpc:call(Gg1, installer, reg_proc, [reg1]), + ok = rpc:call(Gg3, installer, reg_proc, [reg3]), + ok = rpc:call(Gg4, installer, reg_proc, [reg4]), + ok = rpc:call(Gg5, installer, reg_proc, [reg5]), + are_names_reg_gg(Gg1, [reg1, reg3, reg4, reg5]), + + %% Stop gg3, then upgrade gg1, gg4 and gg5 to P1H + ok = stop_nodes([Gg3]), + + ok = install_release_changed_gg(Gg1,"P1H"), + ok = install_release_changed_gg(Gg4,"P1H"), + ok = install_release_changed_gg(Gg5,"P1H"), + + %% Check global group info + Gg2 = node_name(Gg2Sname), + Gg6 = node_name(Gg6Sname), + Nodes2 = [Gg1,Gg4,Gg5], + [check_gg_info(Node,Nodes2,[Gg2,Gg6],Nodes2--[Node]) || Node <- Nodes2], + + %% start gg2 and gg6 + [Gg2,Gg6] = start_nodes(Conf,[Gg2Sname,Gg6Sname],"upgrade_gg start gg2/gg6"), + + %% reg proc on each of the nodes + ok = rpc:call(Gg2, installer, reg_proc, [reg2]), + ok = rpc:call(Gg6, installer, reg_proc, [reg6]), + are_names_reg_gg(Gg1, [reg1, reg2, reg4, reg5, reg6]), + + %% Check global group info + Nodes3 = [Gg1,Gg2,Gg4,Gg5,Gg6], + [check_gg_info(Node,Nodes3,[],Nodes3--[Node]) || Node <- Nodes3], + + ok. + +upgrade_gg(cleanup,Config) -> + Snames = ?config(snames,Config), + NodeNames = [node_name(Sname) || Sname <- Snames], + ok = stop_nodes(NodeNames). + + + + +%%%================================================================= +%%% Misceleaneous functions +%%%================================================================= +stop_nodes(Nodes) -> + ?t:format("Stopping nodes: ~p~n",[Nodes]), + Running = + lists:foldl(fun(Node,Acc) -> + Now = now(), + stop_cover(Node), + case rpc:call(Node,installer,stop,[Now]) of + {badrpc,nodedown} -> + Acc; + Other -> + ?t:format("Stop ~p(~p): ~p~n", + [Node,Now,Other]), + [Node|Acc] + end + end, [], Nodes), + wait_nodes_down(Running). + + +wait_nodes_down(Nodes) -> + ?t:format( "wait_nodes_down ~p:",[Nodes]), + wait_nodes_down(Nodes, 30). + +wait_nodes_down(Nodes, 0) -> + test_server:fail({error, {"could not kill nodes", Nodes}}); +wait_nodes_down(Nodes, N) -> + Fun = fun(Node, A) -> + case net_adm:ping(Node) of + pong -> + ?t:format( " net_adm:ping(~p) = pong", [Node]), + [Node|A]; + pang -> + ?t:format( " net_adm:ping(~p) = pang", [Node]), + A + end + end, + Pang = lists:foldl(Fun, [], Nodes), + case Pang of + [] -> + ?t:format("",[]), + ok; + _ -> + timer:sleep(1000), + wait_nodes_down(Pang, N-1) + end. + + + +wait_nodes_up(Nodes, Tag) -> + wait_nodes_up(Nodes, Tag, []). + +wait_nodes_up(Nodes0, Tag, Apps) -> + ?t:format("wait_nodes_up(~p, ~p, ~p):",[Nodes0, Tag, Apps]), + Nodes = fix_nodes(Nodes0), + wait_nodes_up(Nodes, Tag, lists:umerge(Apps,[kernel,stdlib,sasl]), 30). + +fix_nodes([{Node,InitPid}|Nodes]) -> + [{Node,InitPid} | fix_nodes(Nodes)]; +fix_nodes([Node|Nodes]) -> + [{Node,fake_init_pid} | fix_nodes(Nodes)]; +fix_nodes([]) -> + []. + +wait_nodes_up(Nodes, Tag, Apps, 0) -> + test_server:fail({error, {"nodes not started", Nodes, Tag, Apps}}); +wait_nodes_up(Nodes, Tag, Apps, N) -> + Fun = + fun(NodeInfo={Node,OldInitPid}, A) -> + case rpc:call(Node, application, which_applications, []) of + {badrpc, nodedown} -> + ?t:format( " ~p = {badarg, nodedown}",[Node]), + [NodeInfo | A]; + List when is_list(List)-> + ?t:format( " ~p = [~p]",[Node, List]), + case lists:all(fun(App) -> + lists:keymember(App,1,List) + end, Apps) of + true -> + case rpc:call(Node,erlang,whereis,[init]) of + OldInitPid -> + [NodeInfo | A]; + _ -> + start_cover(Node), + A + end; + false -> + [NodeInfo | A] + end + end + end, + Pang = lists:foldl(Fun,[],Nodes), + case Pang of + [] -> + ?t:format("",[]), + ok; + _ -> + timer:sleep(1000), + wait_nodes_up(Pang, Tag, Apps, N-1) + end. + + + + +are_names_reg_gg(Node, Names) -> + ?t:format( "are_names_reg_gg ~p~n",[Names]), + are_names_reg_gg(Node, Names, 30). + +are_names_reg_gg(Node, Names, N) -> + case lists:sort(rpc:call(Node, global, registered_names, [])) of + Names -> + ok; + Regs when N > 0 -> + timer:sleep(1000), + ?t:format( "are_names_reg_gg Regs ~p~n",[Regs]), + are_names_reg_gg(Node, Names, N-1); + Regs -> + ?t:fail({error, {"Names not registered", + {{"should :", Names}, + {"was :", Regs}}}}) + end. + + + +t_start_node(Name, Boot, SysConfig) -> + Args = + case Boot of + [] -> []; + _ -> " -boot " ++ Boot + end ++ + case SysConfig of + [] -> []; + _ -> " -config " ++ SysConfig + end, + test_server:start_node(Name, slave, [{args, Args}]). + +stop_node(Node) -> + ?t:stop_node(Node). + + +copy_client(Conf,Master,Sname,Client) -> + io:format("copy_client(Conf)"), + + DataDir = ?config(data_dir, Conf), + MasterDir = filename:join(priv_dir(Conf),Master), + + {ClientArgs,RelCliDir} = rh_test_lib:get_client_args(Client,Sname,MasterDir, + node_name(Master)), + + Cli = filename:join([MasterDir, RelCliDir]), + ok = filelib:ensure_dir(filename:join([Cli,"bin","."])), + ok = filelib:ensure_dir(filename:join([Cli,"releases","."])), + ok = filelib:ensure_dir(filename:join([Cli,"log","."])), + + P1GOrig = filename:join([MasterDir, "releases", "P1G"]), + ok = copy_tree(Conf,P1GOrig,filename:join(Cli,"releases")), + + case os:type() of + {unix,_} -> + ok = subst_file(filename:join([DataDir, "start_client"]), + filename:join([Cli,"bin","start"]), + [{"ROOT",MasterDir}, + {"CLIENTARGS",ClientArgs}], + [{chmod,8#0755}]); + _ -> + ok + end, + + StartErlData = filename:join([MasterDir, "releases", "start_erl.data"]), + CliRelDir = filename:join([Cli, "releases"]), + copy_file(StartErlData, CliRelDir), + + RR = filename:join([MasterDir, "releases", "RELEASES"]), + copy_file(RR, CliRelDir), + + ok. + + +delete_release(Conf) -> + PrivDir = priv_dir(Conf), + + {ok, OrigWd} = file:get_cwd(), + + ok = file:set_cwd(PrivDir), + ?t:format("======== current dir ~p~n",[PrivDir]), + {ok, Dirs} = file:list_dir(PrivDir), + ?t:format("======== deleting ~p~n",[Dirs]), + + ok = delete_release_os(Dirs--["save"]), + {ok,Remaining} = file:list_dir(PrivDir), + ?t:format("======== remaining ~p~n",[Remaining]), + + case Remaining of + [] -> + ok; + _ -> + delete_release_os(Remaining), + Remaining2 = file:list_dir(PrivDir), + ?t:format("======== remaining after second try ~p~n",[Remaining2]) + end, + + ok = file:set_cwd(OrigWd), + ok. + + +delete_release_os(Dirs) -> + case os:type() of + {unix, _} -> + delete_release_unix(Dirs); + {win32, _} -> + delete_release_win32(Dirs); + Os -> + test_server:fail({error, {not_yet_implemented_os, Os}}) + end. + + +delete_release_unix([]) -> + ok; +delete_release_unix(["save"|Dirs]) -> + delete_release_unix(Dirs); +delete_release_unix([Dir|Dirs]) -> + Rm = string:concat("rm -rf ", Dir), + ?t:format("============== COMMAND ~p~n",[Rm]), + case file:list_dir(Dir) of + {error, enotdir} -> + ok; + X -> + ?t:format("------- Dir ~p~n ~p~n",[Dir, X]) + end, + case os:cmd(Rm) of + [] -> + ?t:format("------- Result of COMMAND ~p~n",[ok]); + Y -> + ?t:format("!!!!!!! delete ERROR Dir ~p Error ~p~n",[Dir, Y]), + ?t:format("------- ls -al ~p~n",[os:cmd("ls -al " ++ Dir)]) + end, + + delete_release_unix(Dirs). + +delete_release_win32([]) -> + ok; +delete_release_win32(["save"|Dirs]) -> + delete_release_win32(Dirs); +delete_release_win32([Dir|Dirs]) -> + Rm = + case filelib:is_dir(Dir) of + true -> + string:concat("rmdir /s /q ", Dir); + false -> + string:concat("del /q ", Dir) + end, + ?t:format("============== COMMAND ~p~n",[Rm]), + [] = os:cmd(Rm), + delete_release_win32(Dirs). + + +node_name(Sname) when is_atom(Sname) -> + {ok,Host} = inet:gethostname(), + list_to_atom(atom_to_list(Sname) ++ "@" ++ Host). + +copy_file(Src, Dest) -> + copy_file(Src, Dest, []). +copy_file(Src, Dest, Opts) -> + case file:copy(Src,Dest) of + {ok,_} -> + preserve(Src,Dest,Opts), + chmod(Dest,Opts), + ok; + {error,eisdir} -> + NewDest = filename:join(Dest, filename:basename(Src)), + case file:copy(Src,NewDest) of + {ok,_} -> + preserve(Src,NewDest,Opts), + chmod(NewDest,Opts); + {error,Reason} -> + copy_error(Src,Dest,Reason) + end; + {error,Reason} -> + copy_error(Src,Dest,Reason) + end. + +preserve(Src,Dest,Opts) -> + case lists:member(preserve, Opts) of + true -> + {ok, FileInfo} = file:read_file_info(Src), + ok = file:write_file_info(Dest, FileInfo); + false -> + ok + end. + +chmod(Dest,Opts) -> + case lists:keyfind(chmod,1,Opts) of + {chmod,Mode} -> + ok = file:change_mode(Dest, Mode); + false -> + ok + end. + + + +copy_error(Src, Dest, Reason) -> + io:format("Copy ~s to ~s failed: ~s\n", + [Src,Dest,file:format_error(Reason)]), + ?t:fail(file_copy_failed). + +copy_tree(Conf, Src, DestDir) -> + case catch copy_tree(Conf, Src, filename:basename(Src), DestDir) of + ok -> + ok; + {'EXIT', {{badmatch,Error},_Stack}} -> + %% Most probably, an erl_tar call has failed. + %% Known to happen on some platforms (symbolic_link_too_long) + Error; + {'EXIT', Reason} -> + {error, Reason} + end. + +copy_tree(Conf, Src, NewName, DestDir) -> + PrivDir = priv_dir(Conf), + TempTarName = filename:join(PrivDir, "temp_tar_file.tar"), + %% Not compressing tar file here since that would increase test + %% suite time by almost 100%, and the tar file is deleted + %% imediately anyway. + {ok,Tar} = erl_tar:open(TempTarName, [write]), + ok = erl_tar:add(Tar, Src, NewName, []), + ok = erl_tar:close(Tar), + ok = erl_tar:extract(TempTarName, [{cwd,DestDir}]), + ok = file:delete(TempTarName), + ok. + +%% subst_file(Src, Dest, Vars) +%% Src = Dest = string(), filename and path +%% Vars = [{Var, Val}] +%% Var = Val = string() +%% Substitute all occurrences of %Var% for Val in Src, using the list +%% of variables in Vars. Result is written to Dest. +%% +subst_file(Src, Dest, Vars) -> + subst_file(Src, Dest, Vars, []). +subst_file(Src, Dest, Vars, Opts) -> + {ok, Bin} = file:read_file(Src), + Conts = binary_to_list(Bin), + NConts = subst(Conts, Vars), + ok = file:write_file(Dest, NConts), + preserve(Src,Dest,Opts), + chmod(Dest,Opts). + +subst(Str, Vars) -> + subst(Str, Vars, []). + +subst([$%, C| Rest], Vars, Result) when $A =< C, C =< $Z -> + subst_var([C| Rest], Vars, Result, []); +subst([$%, C| Rest], Vars, Result) when $a =< C, C =< $z -> + subst_var([C| Rest], Vars, Result, []); +subst([$%, C| Rest], Vars, Result) when C == $_ -> + subst_var([C| Rest], Vars, Result, []); +subst([C| Rest], Vars, Result) -> + subst(Rest, Vars, [C| Result]); +subst([], _Vars, Result) -> + lists:reverse(Result). + +subst_var([$%| Rest], Vars, Result, VarAcc) -> + Key = lists:reverse(VarAcc), + case lists:keysearch(Key, 1, Vars) of + {value, {Key, Value}} -> + subst(Rest, Vars, lists:reverse(Value, Result)); + false -> + subst(Rest, Vars, [$%| VarAcc ++ [$%| Result]]) + end; +subst_var([C| Rest], Vars, Result, VarAcc) -> + subst_var(Rest, Vars, Result, [C| VarAcc]); +subst_var([], Vars, Result, VarAcc) -> + subst([], Vars, [VarAcc ++ [$%| Result]]). + + +priv_dir(Conf) -> +%% filename:absname(?config(priv_dir, Conf)). % Get rid of trailing slash + %% Due to problem with long paths on windows => creating a new + %% priv_dir under data_dir + Dir = filename:absname(filename:join(?config(data_dir, Conf),priv_dir)), + filelib:ensure_dir(filename:join(Dir,"*")), + Dir. + +latest_version(Dir) -> + List = filelib:wildcard(Dir ++ "*"), + lists:last(lists:sort(List)). + +%% A printer process which receives messages from other nodes and +%% prints in the log +reg_print_proc() -> + catch unregister(rh_print), + Pid = spawn_link(?MODULE, rh_print, []), + register(rh_print, Pid), + ok. + +rh_print() -> + receive + {print, {Module,Line}, [H|T]} -> + ?t:format("=== ~p:~p - ~p",[Module,Line,H]), + lists:foreach(fun(Term) -> ?t:format(" ~p",[Term]) end, T), + ?t:format("",[]), + rh_print(); + kill -> + exit(normal) + end. + +stop_print_proc() -> + case whereis(rh_print) of %%removes the printer process + undefined -> + ok; + Pid when is_pid(Pid) -> + rh_print ! kill + end. + +%% Create the first target release, vsn P1G. This release is used for +%% all test cases in {group,release} +create_p1g(Conf,Sname) -> + do_create_p1g(Conf,filename:join(priv_dir(Conf),Sname)). + +do_create_p1g(Conf,TargetDir) -> + PrivDir = priv_dir(Conf), + DataDir = ?config(data_dir,Conf), + ErtsVsn = "4.4", + ErtsDir = "erts-"++ErtsVsn, + + %% Create dirs + BinDir = filename:join(TargetDir,bin), + ReleasesDir = filename:join(TargetDir,releases), + LogDir = filename:join(TargetDir,log), + ok = filelib:ensure_dir(filename:join(BinDir,"*")), + ok = filelib:ensure_dir(filename:join(ReleasesDir,"*")), + ok = filelib:ensure_dir(filename:join(LogDir,"*")), + + %% Copy stuff + ErtsLatest = latest_version(filename:join(code:root_dir(),"erts")), + ok = copy_tree(Conf, ErtsLatest, ErtsDir, TargetDir), + ErtsBinDir = filename:join([TargetDir,ErtsDir,bin]), + + case os:type() of + {unix, _} -> + copy_file(filename:join([ErtsBinDir, "epmd"]), BinDir, [preserve]), + copy_file(filename:join([ErtsBinDir, "run_erl"]), BinDir, [preserve]), + copy_file(filename:join([ErtsBinDir, "to_erl"]), BinDir, [preserve]), + + %% Create the start_erl shell script + ok = subst_file(filename:join([ErtsBinDir,"start_erl.src"]), + filename:join([BinDir,"start_erl"]), + [{"EMU","beam"}], + [{chmod,8#0755}]); + {win32,_} -> + %% Add a batch file to use as HEART_COMMAND + ok = copy_file(filename:join(DataDir, "heart_restart.bat"), + ErtsBinDir,[preserve]) + end, + + copy_file(filename:join(DataDir, "../installer.beam"), + filename:join([DataDir,lib,"installer-1.0",ebin])), + copy_file(filename:join(DataDir, "../rh_test_lib.beam"), + filename:join([DataDir,lib,"installer-1.0",ebin])), + + %% Create .rel, .script and .boot files + RelName = "rel0", + RelVsn = "P1G", + RelDir = filename:join(PrivDir,RelName), + RelFileName = filename:join(RelDir,RelName), + RelFile = RelFileName ++ ".rel", + ok = filelib:ensure_dir(RelFile), + LibPath = filename:join([DataDir,lib,"*",ebin]), + + TarFile = create_basic_release(Conf, RelFile, RelVsn, {ErtsVsn,false}, + LibPath, [], [], [], []), + + %% Extract tar file in target directory (i.e. same directory as erts etc.) + ok = erl_tar:extract(TarFile, [{cwd, TargetDir}, compressed]), + + %% Create start_erl.data + StartErlDataFile = filename:join([ReleasesDir, "start_erl.data"]), + StartErlData = io_lib:fwrite("~s ~s~n", [ErtsVsn, RelVsn]), + ok = file:write_file(StartErlDataFile, StartErlData), + + %% Create RELEASES + ok = release_handler:create_RELEASES(TargetDir,ReleasesDir,RelFile,[]), + + ok. + +%% Create version P1H - which is P1G + a-1.0 +%% Must have run create_p1g first!! +create_p1h(Conf) -> + create_upgrade_release(Conf,"rel1","P1H",{"4.4",false},[{a,"1.0"}], + [{a,[{key2,val2}]}],{"rel0",[new_appl]}). + +%% Create version P1I - which is P1H, but with application a upgraded to a-1.1 +%% Must have run create_p1h first!! +create_p1i(Conf) -> + create_upgrade_release(Conf,"rel2","P1I",{"4.4",false},[{a,"1.1"}], + [{a,[{key2,newval2}]}], + {"rel1",[{extra,gott}]}). + +%% Create version P2A - which is P1I, but with erts-<latest> +%% Must have run create_p1i first!! +create_p2a(Conf) -> + ErtsVsn = erlang:system_info(version), + create_upgrade_release(Conf,"rel3","P2A",{ErtsVsn,code:root_dir()}, + [{a,"1.1"}],[{a,[{key2,newval2}]}], + {"rel2",[new_emu]}). + +%% Create a release tar package which can be installed on top of P1G +create_upgrade_release(Conf,RelName,RelVsn,Erts,Apps,Config,{UpFromName,Descr}) -> + PrivDir = priv_dir(Conf), + DataDir = ?config(data_dir,Conf), + + RelDir = filename:join(PrivDir,RelName), + RelFileName = filename:join(RelDir,RelName), + RelFile = RelFileName ++ ".rel", + ok = filelib:ensure_dir(RelFile), + LibPath = filename:join([DataDir,lib,"*",ebin]), + + UpFrom = [{filename:join([PrivDir,UpFromName,UpFromName]),Descr}], + + create_basic_release(Conf, RelFile, RelVsn, Erts, LibPath, + Apps, Config, UpFrom, []), + ok. + +%% Create .rel, .script, .boot, sys.config and tar +create_basic_release(Conf, RelFile,RelVsn,{ErtsVsn,ErtsDir},LibPath,ExtraApps,Config,UpFrom,DownTo) -> + RelDir = filename:dirname(RelFile), + RelFileName = filename:rootname(RelFile), + + %% Create .rel file + create_installer_rel_file(RelFile,RelVsn,ErtsVsn,ExtraApps), + + %% Generate .script and .boot + ok = systools:make_script(RelFileName, + [{path,[LibPath]}, + {outdir,RelDir}]), + + %% Generate relup + ok = systools:make_relup(RelFileName,UpFrom,DownTo,[{path,[LibPath]}, + {outdir,RelDir}]), + + %% Create sys.config + ok = write_term_file(filename:join(RelDir,"sys.config"),Config), + + + %% Create tar file (i.e. collect all lib/app-*/* and system files) + ok = systools:make_tar(RelFileName, + [{path,[LibPath]}, + {outdir,RelDir} | + case ErtsDir of + false -> []; + _ -> [{erts,ErtsDir}] + end]), + + TarFileName = RelFileName ++ ".tar.gz", + + case os:type() of + {win32,_} when ErtsDir=/=false -> modify_tar_win32(Conf, TarFileName); + _ -> ok + end, + + TarFileName. + +%% Create a .rel file +create_installer_rel_file(RelFile,RelVsn,ErtsVsn,ExtraApps) -> + create_rel_file(RelFile,"SASL-test",RelVsn,ErtsVsn, + [{installer,"1.0"}|ExtraApps]). + +create_rel_file(RelFile,RelName,RelVsn,ErtsVsn,ExtraApps) -> + {ok,KernelVsn} = application:get_key(kernel,vsn), + {ok,StdlibVsn} = application:get_key(stdlib,vsn), + {ok,SaslVsn} = application:get_key(sasl,vsn), + application:load(tools), + {ok,ToolsVsn} = application:get_key(tools,vsn), + application:load(runtime_tools), + {ok,RuntimeToolsVsn} = application:get_key(runtime_tools,vsn), + + RelFileContent = {release, + {RelName, RelVsn}, + {erts, ErtsVsn}, + [{kernel, KernelVsn}, + {stdlib, StdlibVsn}, + {sasl, SaslVsn}, + {runtime_tools, RuntimeToolsVsn}, + {tools, ToolsVsn} | + ExtraApps]}, + ok = write_term_file(RelFile,RelFileContent). + +%% Insert a term in a file, which can be read with file:consult/1. +write_term_file(File,Term) -> + ok = file:write_file(File,io_lib:format("~p.~n",[Term])). + + +%% Check that global group info is correct +check_gg_info(Node,OtherAlive,OtherDead,Synced) -> + GGI = rpc:call(Node, global_group, info, []), + GI = rpc:call(Node, global, info,[]), + try do_check_gg_info(OtherAlive,OtherDead,Synced,GGI,GI) + catch _:E -> + ?t:format("~ncheck_gg_info failed for ~p: ~p~nwhen GGI was: ~p~n" + "and GI was: ~p~n", + [Node,E,GGI,GI]), + ?t:fail("check_gg_info failed") + end. + +do_check_gg_info(OtherAlive,OtherDead,Synced,GGI,GI) -> + {_,gg1} = lists:keyfind(own_group_name,1,GGI), + {_,synced} = lists:keyfind(state,1,GGI), + {_,AllNodes} = lists:keyfind(own_group_nodes,1,GGI), + true = lists:sort(AllNodes) =:= lists:sort(OtherAlive++OtherDead), + {_,[]} = lists:keyfind(sync_error,1,GGI), + {_,[{gg2,[_,_]}]} = lists:keyfind(other_groups,1,GGI), + + %% There is a known bug in global_group (OTP-9177) which causes + %% the following to fail every now and then: + %% {_,SyncedNodes} = lists:keyfind(synced_nodes,1,GGI), + %% true = lists:sort(SyncedNodes) =:= lists:sort(Synced), + %% {_,NoContact} = lists:keyfind(no_contact,1,GGI), + %% true = lists:sort(NoContact) =:= lists:sort(OtherDead), + + %% Therefore we use global:info instead for this part + {state,_,_,SyncedNodes,_,_,_,_,_,_,_} = GI, + true = lists:sort(SyncedNodes) =:= lists:sort(Synced), + + %% .. and we only check that all OtherDead are listed as + %% no_contact (due to th bug there might be more nodes in this + %% list) + {_,NoContact} = lists:keyfind(no_contact,1,GGI), + true = + lists:sort(OtherDead) =:= + lists:sort([NC || NC <- NoContact,lists:member(NC,OtherDead)]), + + ok. + +%% Return the configuration (to be inserted in sys.config) for global group tests +gg_config(Snames) -> + Nodes = [node_name(Sname) || Sname <- Snames], + [{kernel, [{sync_nodes_optional, Nodes}, + {sync_nodes_timeout, 10000}, + {global_groups, + [{gg1, Nodes}, + {gg2, [node_name(Sname) || Sname <- [ggq,ggw]]}]}]}, + {a, [{key2, val2}]}]. + +%% Start a node with short name SnameStr, and unpack P1H +unpack_p1h(Conf,Sname) -> + PrivDir = priv_dir(Conf), + [Node] = start_nodes(Conf,[Sname],"create_p1h"), + ok = rpc_inst(Node, unpack_p1h, [PrivDir]), + Node. + +%% On the given node, install P1H and make it permanent +%% This function is to be called after unpack_p1h/2, with the same node. +permanent_p1h(Node) -> + ok = rpc_inst(Node, permanent_p1h, []). + +%% For each node in ToNodes, create a target installation which is +%% indentical to the target installation for FromNode. +copy_installed(Conf,FromNode,ToNodes) -> + PrivDir = priv_dir(Conf), + DataDir = ?config(data_dir,Conf), + + %% Instead of using copy_tree on the complete node directory, I'm + %% splitting this in separate tar files per subdirectory so the + %% log directory can be completely skipped. The reason for this is + %% that the tar file might become faulty if the node is alive and + %% writing to the log while the tar is created. + FromDir = filename:join(PrivDir,FromNode), + {ok,FromDirNames} = file:list_dir(FromDir), + TempTarFiles = + [begin + TempTarFile = filename:join(PrivDir,"temp_" ++ FDN ++ ".tar"), + {ok,Tar} = erl_tar:open(TempTarFile,[write]), + ok = erl_tar:add(Tar,filename:join(FromDir,FDN),FDN,[]), + ok = erl_tar:close(Tar), + TempTarFile + end || FDN <- FromDirNames, FDN=/="log"], + lists:foreach( + fun(Node) -> + NodeDir = filename:join(PrivDir,Node), + ok = filelib:ensure_dir(filename:join([NodeDir,"log","*"])), + lists:foreach( + fun(TempTarFile) -> + ok = erl_tar:extract(TempTarFile,[{cwd,NodeDir}]) + end, TempTarFiles), + case os:type() of + {unix,_} -> + %% Create start script + %% Using a customized start script from DataDir + %% where some options (heart and nodename) are + %% added compared to the start.src in the erlang + %% distribution. + ok = subst_file(filename:join(DataDir, "start"), + filename:join([NodeDir, "bin", "start"]), + [{"ROOT",NodeDir}], + [preserve]); + {win32,_} -> + %% Write erl.ini + ErtsDirs = + filelib:wildcard(filename:join(NodeDir,"erts-*")), + lists:foreach( + fun(ErtsDir) -> + ok = subst_file( + filename:join(DataDir, "erl.ini.src"), + filename:join([ErtsDir, "bin", "erl.ini"]), + [{"ROOTDIR",NodeDir}, + {"BINDIR",filename:join(ErtsDir,"bin")}]) + end, + ErtsDirs), + + %% The service on windows runs as local + %% administrator (not otptest user), so we need + %% to chmod the release in order to allow the + %% executing node to install releases, write + %% logs etc. + chmod_release_win32(NodeDir) + end + end, + ToNodes), + + lists:foreach(fun(TempTarFile) -> file:delete(TempTarFile) end, TempTarFiles), + ok. + +chmod_release_win32(Dir) -> + os:cmd("echo y|cacls " ++ Dir ++ " /T /E /G Administrators:F"). + +start_nodes(Conf,Snames,Tag) -> + PrivDir = priv_dir(Conf), + Nodes = + lists:map( + fun(Sname) -> + NodeDir = filename:join(PrivDir,Sname), + Node = node_name(Sname), + + case os:type() of + {unix,_} -> + start_node_unix(Sname,NodeDir); + {win32,_} -> + start_node_win32(Sname,NodeDir) + end, + Node + end, + Snames), + wait_nodes_up(Nodes,Tag), + Nodes. + +start_node_unix(Sname,NodeDir) -> + Script = filename:join([NodeDir,"bin","start"]), + Cmd = "env NODENAME="++atom_to_list(Sname) ++ " " ++ Script, + %% {ok,StartFile} = file:read_file(Cmd), + %% io:format("~s:\n~s~n~n",[Start,binary_to_list(StartFile)]), + Res = os:cmd(Cmd), + io:format("Start ~p: ~p~n=>\t~p~n", [Sname,Cmd,Res]). + +start_node_win32(Sname,NodeDir) -> + Name = atom_to_list(Sname) ++ "_P1G", + ErtsBinDir = filename:join(NodeDir,"erts-4.4/bin"), + + StartErlArgs = rh_test_lib:get_start_erl_args(NodeDir), + ServiceArgs = rh_test_lib:get_service_args(NodeDir, Sname, StartErlArgs), + + Erlsrv = filename:nativename(filename:join(ErtsBinDir,"erlsrv")), + rh_test_lib:erlsrv(Erlsrv,stop,Name), + rh_test_lib:erlsrv(Erlsrv,remove,Name), + ok = rh_test_lib:erlsrv(Erlsrv,add,Name,ServiceArgs), + ok = rh_test_lib:erlsrv(Erlsrv,start,Name), + ok. + +%% Create a unique node name for each test case +tc_sname(Config) -> + tc_sname(Config,""). +tc_sname(Config,Fix) when is_atom(Fix) -> + tc_sname(Config,atom_to_list(Fix)); +tc_sname(Config,Fix) when is_list(Fix) -> + list_to_atom( + atom_to_list(?MODULE) + ++ "-" ++ atom_to_list(?config(sname_prefix, Config)) ++ + case Fix of + "" -> ""; + _ -> "-" ++ Fix + end). + +tc_full_node_name(Config) -> + tc_full_node_name(Config,""). +tc_full_node_name(Config,Fix) -> + node_name(tc_sname(Config,Fix)). + + +%% When installing a release for which the sys.config includes added +%% or changed global group(s), this node (test_sever@host) will be +%% disconnected from the test node (Node) by global_group.erl. This +%% will cause the rpc:call to terminate with {badrpc,nodedown} even if +%% the installation succeeds. This function installs the release, +%% accepts the faulty return value and then checks if the release was +%% successfully installed. +install_release_changed_gg(Node,RelVsn) -> + stop_cover(Node), + {badrpc,nodedown} = rpc:call(Node,release_handler,install_release,[RelVsn]), + timer:sleep(100), + wait_installed(Node,RelVsn,4). + +wait_installed(Node,RelVsn,0) -> + ?t:fail("install_release_changed_gg failed for " ++ RelVsn ++ + " on " ++ atom_to_list(Node)); +wait_installed(Node,RelVsn,N) -> + Rels = rpc:call(Node,release_handler,which_releases,[]), + case lists:keyfind(RelVsn, 2, Rels) of + {"SASL-test", RelVsn, _Libs, current} -> + start_cover(Node), + ok; + _ -> + timer:sleep(500), + wait_installed(Node,RelVsn,N-1) + end. + +%% Start/stop cover measurements on the given node +start_cover(Node) -> + cover_fun(Node,start). +stop_cover(Node) -> + cover_fun(Node,stop). + +cover_fun(Node,Func) -> + case ?t:is_cover() of + true -> + cover:Func(Node); + false -> + ok + end. + +%%%----------------------------------------------------------------- +%%% Create a fake release .... + +%% This function will create and install a release build on the +%% current running OTP release. It includes kernel, stdlib and sasl, +%% and possibly other applications if they are listed in AppDirs = +%% [{App,Vsn,LibDir}] +create_and_install_fake_first_release(Dir,AppDirs) -> + %% Create the first release + {RelName,RelVsn} = init:script_id(), + {Rel,_} = create_fake_release(Dir,RelName,RelVsn,AppDirs), + ReleasesDir = filename:join(Dir, "releases"), + RelDir = filename:dirname(Rel), + + %% And install it + RelVsnDir = filename:join(ReleasesDir, RelVsn), + ok = filelib:ensure_dir(filename:join(RelVsnDir,"*")), + + ok = copy_file(Rel++".rel",RelVsnDir), + ok = copy_file(Rel++".boot",filename:join(RelVsnDir, "start.boot")), + ok = copy_file(filename:join(RelDir,"sys.config"),RelVsnDir), + + ok = release_handler:create_RELEASES(code:root_dir(), + ReleasesDir, + Rel++".rel", + AppDirs), + + Rel. + +%% This function create a new release, including a relup file. It can +%% be upgraded to from the release created by +%% create_and_install_fake_first_release/2. Unpack first by calls to +%% release_handler:set_unpacked and release_handler:install_file. +create_fake_upgrade_release(Dir,RelVsn,AppDirs,{UpFrom,DownTo,ExtraLibs}) -> + %% Create a new release + {RelName,_} = init:script_id(), + {Rel,Paths} = create_fake_release(Dir,RelName,RelVsn,AppDirs), + RelDir = filename:dirname(Rel), + + %% And a relup file so it can be upgraded to + RelupPath = Paths ++ [filename:join([Lib,"*","ebin"]) || Lib <- ExtraLibs], + ok = systools:make_relup(Rel,[UpFrom],[DownTo], + [{path,RelupPath}, + {outdir,RelDir}]), + + Rel. + + +create_fake_release(Dir,RelName,RelVsn,AppDirs) -> + %% Create .rel files + RelDir = filename:join(Dir,"rel_" ++ RelVsn), + Rel = filename:join([RelDir,"rel_" ++ RelVsn]), + ok = filelib:ensure_dir(Rel), + ErtsVsn = erlang:system_info(version), + + {Apps,Paths} = + lists:foldl(fun({App,Vsn,Lib},{As,Ps}) -> + {[{App,Vsn}|As], + lists:umerge([filename:join([Lib,"*",ebin])],Ps)} + end, + {[],[]}, + AppDirs), + + create_rel_file(Rel++".rel",RelName,RelVsn,ErtsVsn,Apps), + + %% Generate boot scripts + ok = systools:make_script(Rel,[local, + {path, Paths}, + {outdir,RelDir}]), + ok = copy_file(Rel++".boot", filename:join(RelDir,"start.boot")), + + %% Use an own 'releases' directory - we don't want to change the + %% contents of $OTP_ROOT/releases + %% Inform SASL about this via sys.config + ReleasesDir = filename:join(Dir, "releases"), + Config = [{sasl,[{releases_dir,ReleasesDir}]}], + ok = write_term_file(filename:join(RelDir,"sys.config"), Config), + + {Rel,Paths}. + + +rpc_inst(Node,Func,Args) -> + rpc:call(Node,installer,Func,[node()|Args]). + +delete_all_services() -> + ErlSrv = erlsrv:erlsrv(erlang:system_info(version)), + [_|Serviceinfo] = string:tokens(os:cmd(ErlSrv ++ " list"),"\n"), + Services = + [lists:takewhile(fun($\t) -> false; (_) -> true end,S) + || S <- Serviceinfo], + ?t:format("Services to remove: ~p~n",[Services]), + lists:foreach(fun(S) -> + rh_test_lib:erlsrv(ErlSrv,stop,S), + rh_test_lib:erlsrv(ErlSrv,remove,S) + end, + Services). + +modify_tar_win32(Conf, TarFileName) -> + DataDir = ?config(data_dir,Conf), + PrivDir = priv_dir(Conf), + TmpDir = filename:join(PrivDir,"tmp_modify_tar_win32"), + ok = erl_tar:extract(TarFileName,[{cwd,TmpDir},compressed]), + + ErtsBinDir = filelib:wildcard(filename:join([TmpDir,"erts-*","bin"])), + ok = copy_file(filename:join(DataDir, "heart_restart.bat"), + ErtsBinDir,[preserve]), + + {ok,Fs} = file:list_dir(TmpDir), + {ok,T} = erl_tar:open(TarFileName,[write,compressed]), + [ok = erl_tar:add(T,filename:join(TmpDir,F),F,[]) || F <- Fs], + ok = erl_tar:close(T), + ok. |