aboutsummaryrefslogtreecommitdiffstats
path: root/lib/snmp/doc/src/notes.xml
diff options
context:
space:
mode:
Diffstat (limited to 'lib/snmp/doc/src/notes.xml')
-rw-r--r--lib/snmp/doc/src/notes.xml412
1 files changed, 202 insertions, 210 deletions
diff --git a/lib/snmp/doc/src/notes.xml b/lib/snmp/doc/src/notes.xml
index b902e421ca..440077e931 100644
--- a/lib/snmp/doc/src/notes.xml
+++ b/lib/snmp/doc/src/notes.xml
@@ -11,7 +11,7 @@
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
-
+
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
@@ -19,7 +19,7 @@
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
-
+
</legalnotice>
<title>SNMP Release Notes</title>
@@ -220,8 +220,8 @@
<list type="bulleted">
<item>
<p>[compiler] Refinement of type Opaque was not allowed. </p>
- <p>MIB constructs such as '<c>SYNTAX Opaque (SIZE(0..65535))</c>'
- was previously not allowed,
+ <p>MIB constructs such as '<c>SYNTAX Opaque (SIZE(0..65535))</c>'
+ was previously not allowed,
see the standard <c>ALARM-MIB</c> for eaxmple. </p>
<p>Own Id: OTP-12066</p>
<p>Aux Id: Seq 12669</p>
@@ -238,8 +238,8 @@
<!--
<list type="bulleted">
<item>
- <p>[agent]
- see <seealso marker="snmpa#load_mibs">load_mibs</seealso> and
+ <p>[agent]
+ see <seealso marker="snmpa#load_mibs">load_mibs</seealso> and
<seealso marker="snmpa#unload_mibs">unload_mibs</seealso>. </p>
<p>Own Id: OTP-11216</p>
</item>
@@ -370,18 +370,18 @@
<!--
<list type="bulleted">
<item>
- <p>Wrong block cypher type used for AES ('aes_cbf128'
- instead of 'aes_cfb128') when performing AES block
- encrypt/decrypt which breaks SNMP usmAesCfb128Protocol
+ <p>Wrong block cypher type used for AES ('aes_cbf128'
+ instead of 'aes_cfb128') when performing AES block
+ encrypt/decrypt which breaks SNMP usmAesCfb128Protocol
in agent and manager. </p>
<p>Own Id: OTP-11412</p>
</item>
<item>
- <p>[manager] When performing the AES encryption, invalid values for
+ <p>[manager] When performing the AES encryption, invalid values for
the EngineBoots and EngineTime was used. </p>
- <p>The values of the local agent was used, which would have produced
- "some" values if an agent was actually running.
+ <p>The values of the local agent was used, which would have produced
+ "some" values if an agent was actually running.
If not it would have caused a crash. </p>
<p>Own Id: OTP-11413</p>
</item>
@@ -425,16 +425,16 @@
<list type="bulleted">
<item>
<p>[agent] Enable SNMP to create missing database directories. </p>
- <p>Add
+ <p>Add
<seealso marker="snmp_app#db_init_error">
- {db_init_error, create_db_and_dir}</seealso> option to SNMP
- <seealso marker="snmp_app#manager_opts_and_types">manager</seealso>
+ {db_init_error, create_db_and_dir}</seealso> option to SNMP
+ <seealso marker="snmp_app#manager_opts_and_types">manager</seealso>
and
- <seealso marker="snmp_app#agent_opts_and_types">agent</seealso>.
+ <seealso marker="snmp_app#agent_opts_and_types">agent</seealso>.
This allows them to create any missing parent directories for
- <c>db_dir</c>, rather than treating any missing directories
+ <c>db_dir</c>, rather than treating any missing directories
as a fatal error.
- The default for <c>db_init_error</c>, which is <c>terminate</c>,
+ The default for <c>db_init_error</c>, which is <c>terminate</c>,
is unchanged. </p>
<p>Steve Vinoski</p>
<p>Own Id: OTP-11352</p>
@@ -444,7 +444,7 @@
<p>[manager] Improved handling of unexpected return values from
<seealso marker="snmpm_user">snmpm_user</seealso>
callback functions. </p>
- <p>Violations of the documented API (crashes or invalid return
+ <p>Violations of the documented API (crashes or invalid return
values) will now result in an error message. </p>
<p>Own Id: OTP-11307</p>
</item>
@@ -452,16 +452,16 @@
<item>
<p>Add (atl) log conversion block option. </p>
<p>It is now possible to request that the Audit Trail Log should
- be blocked during conversion (<c>log_to_txt</c> or <c>log_to_io</c>).
- This could be usefull when coverting an entire large log (when
+ be blocked during conversion (<c>log_to_txt</c> or <c>log_to_io</c>).
+ This could be usefull when coverting an entire large log (when
there is a chance it may otherwise wrap during conversion). </p>
- <p>See
- agent
+ <p>See
+ agent
<seealso marker="snmpa#log_to_txt">log_to_txt</seealso> and
- <seealso marker="snmpa#log_to_io">log_to_io</seealso> and also
- manager
+ <seealso marker="snmpa#log_to_io">log_to_io</seealso> and also
+ manager
<seealso marker="snmpm#log_to_txt">log_to_txt</seealso> and
- <seealso marker="snmpm#log_to_io">log_to_io</seealso>
+ <seealso marker="snmpm#log_to_io">log_to_io</seealso>
for details. </p>
<p>Own Id: OTP-11396</p>
<p>Own Id: seq12433</p>
@@ -470,9 +470,9 @@
<item>
<p>When converting an Audit Trail Log to text, a corrupt
log entry could cause the entire conversion to fail. </p>
- <p>Also, for a log with sequence numbers, failing to
+ <p>Also, for a log with sequence numbers, failing to
decode a log entry would cause the conversion to fail
- (not because of the failed decode, but because of the
+ (not because of the failed decode, but because of the
failure to write the error message). </p>
<p>Own Id: OTP-111453</p>
<p>Aux Id: Seq 12459</p>
@@ -490,18 +490,18 @@
<list type="bulleted">
<item>
- <p>Wrong block cypher type used for AES ('aes_cbf128'
- instead of 'aes_cfb128') when performing AES block
- encrypt/decrypt which breaks SNMP usmAesCfb128Protocol
+ <p>Wrong block cypher type used for AES ('aes_cbf128'
+ instead of 'aes_cfb128') when performing AES block
+ encrypt/decrypt which breaks SNMP usmAesCfb128Protocol
in agent and manager. </p>
<p>Own Id: OTP-11412</p>
</item>
<item>
- <p>[manager] When performing the AES encryption, invalid values for
+ <p>[manager] When performing the AES encryption, invalid values for
the EngineBoots and EngineTime was used. </p>
- <p>The values of the local agent was used, which would have produced
- "some" values if an agent was actually running.
+ <p>The values of the local agent was used, which would have produced
+ "some" values if an agent was actually running.
If not it would have caused a crash. </p>
<p>Own Id: OTP-11413</p>
</item>
@@ -543,14 +543,14 @@
<list type="bulleted">
<item>
- <p>[agent] Improved documentation for the functions for
- loading and unloading mibs,
- see <seealso marker="snmpa#load_mibs">load_mibs</seealso> and
- <seealso marker="snmpa#unload_mibs">unload_mibs</seealso> for
+ <p>[agent] Improved documentation for the functions for
+ loading and unloading mibs,
+ see <seealso marker="snmpa#load_mibs">load_mibs</seealso> and
+ <seealso marker="snmpa#unload_mibs">unload_mibs</seealso> for
more info. </p>
- <p>Also added new functions for loading and unloading a single mib,
- see <seealso marker="snmpa#load_mib">load_mib</seealso> and
- <seealso marker="snmpa#unload_mib">unload_mib</seealso> for
+ <p>Also added new functions for loading and unloading a single mib,
+ see <seealso marker="snmpa#load_mib">load_mib</seealso> and
+ <seealso marker="snmpa#unload_mib">unload_mib</seealso> for
more info. </p>
<p>Own Id: OTP-11216</p>
</item>
@@ -566,8 +566,8 @@
<!--
<list type="bulleted">
<item>
- <p>[agent]
- see <seealso marker="snmpa#load_mibs">load_mibs</seealso> and
+ <p>[agent]
+ see <seealso marker="snmpa#load_mibs">load_mibs</seealso> and
<seealso marker="snmpa#unload_mibs">unload_mibs</seealso>. </p>
<p>Own Id: OTP-11216</p>
</item>
@@ -593,7 +593,7 @@
</list>
-->
</section>
-
+
</section> <!-- 4.24.2 -->
@@ -626,29 +626,29 @@
<list type="bulleted">
<item>
- <p>[agent] Reading the value of the vacmViewTreeFamilyMask returns
+ <p>[agent] Reading the value of the vacmViewTreeFamilyMask returns
it in the wrong (internal bitlist) format. </p>
<p>The vacmViewTreeFamilyMask is defined as a bit string in the MIB
- (OCTET STRING). Internally a bitlist (list of 1's and 0's,
+ (OCTET STRING). Internally a bitlist (list of 1's and 0's,
see <seealso marker="snmp_agent_config_files#vacm">vacm config file</seealso>
- for more info) is used.
+ for more info) is used.
However, the MIB implementation assumed the latter, effectively
rendering all attempts to read/set masks via SNMP unsuccessful. </p>
- <p>Since the mask is used in hot paths (e.g. access permission checks
- for each SNMP operation, the bitlist representation of the mask has
- benefits (e.g. faster processing). Reading/writing the view mask
- objects is less time-critical. Therefore, to fix the issue, convert
- between the bitlist (internal) representation and bitstring
+ <p>Since the mask is used in hot paths (e.g. access permission checks
+ for each SNMP operation, the bitlist representation of the mask has
+ benefits (e.g. faster processing). Reading/writing the view mask
+ objects is less time-critical. Therefore, to fix the issue, convert
+ between the bitlist (internal) representation and bitstring
(external) when the vacmViewTreeFamilyMask objects are accessed. </p>
- <p>Also, the check of the vacm config file was invalid with
- regard to the mask value. It was assumed to be a proper oid, which
+ <p>Also, the check of the vacm config file was invalid with
+ regard to the mask value. It was assumed to be a proper oid, which
is not strictly the case (see bitlist above). </p>
<p>Own Id: OTP-11177</p>
<p>Stefan Zegenhagen</p>
</item>
<item>
- <p>[agent] The counter increment function in the local-db was
+ <p>[agent] The counter increment function in the local-db was
incorrect. It did not handle counter wrap correctly. </p>
<p>Own Id: OTP-11192</p>
</item>
@@ -695,26 +695,26 @@
</item>
<item>
- <p>[agent] Introduced a documented behaviour for the mib-server
- <seealso marker="snmpa_mib_data">mib-data backend</seealso>.
+ <p>[agent] Introduced a documented behaviour for the mib-server
+ <seealso marker="snmpa_mib_data">mib-data backend</seealso>.
At present only the default module (<c>snmpa_mib_data_tttn</c>) is
provided. </p>
- <p>A config option for the (agent)
- <seealso marker="snmp_config#agent_mib_server">mib-servers</seealso>
- mib-data backend module has been added to the agent config options,
+ <p>A config option for the (agent)
+ <seealso marker="snmp_config#agent_mib_server">mib-servers</seealso>
+ mib-data backend module has been added to the agent config options,
<seealso marker="snmp_config#agent_ms_data_module">data_module</seealso>. </p>
<p>Own Id: OTP-11101</p>
</item>
<item>
- <p>[agent] Introduced a documented behaviour for the
- <seealso marker="snmpa_mib_storage">mib storage</seealso>.
- At present there are three simple modules
- (<c>snmpa_mib_storage_ets</c>, <c>snmpa_mib_storage_dets</c> and
+ <p>[agent] Introduced a documented behaviour for the
+ <seealso marker="snmpa_mib_storage">mib storage</seealso>.
+ At present there are three simple modules
+ (<c>snmpa_mib_storage_ets</c>, <c>snmpa_mib_storage_dets</c> and
<c>snmpa_mib_storage_mnesia</c>) implementing this behaviour,
provided with the app. </p>
- <p>A config option for the (agent)
- <seealso marker="snmp_config#agent_mib_storage">mib storage</seealso>
+ <p>A config option for the (agent)
+ <seealso marker="snmp_config#agent_mib_storage">mib storage</seealso>
has been added to the agent config options. </p>
<p>Own Id: OTP-11107</p>
</item>
@@ -772,14 +772,14 @@
<list type="bulleted">
<item>
<p>[agent] Errors in <c>vacmAccessTable</c> RowStatus handling.
- There are problems with the handling of vacmAccessTableStatus
+ There are problems with the handling of vacmAccessTableStatus
that cause some SNMP test suites to report errors.
- Most notably, erroneous set operations frequently cause "genErr"
- errors to be returned. These "genErr" errors are usually caused
- by badmatch exceptions coming from
- <c>{ok, Row} = snmpa_vacm:get_row(RowIndex)</c>
+ Most notably, erroneous set operations frequently cause "genErr"
+ errors to be returned. These "genErr" errors are usually caused
+ by badmatch exceptions coming from
+ <c>{ok, Row} = snmpa_vacm:get_row(RowIndex)</c>
if the row does not exist. </p>
- <p>The semantics of the RowStatus handling in that table has
+ <p>The semantics of the RowStatus handling in that table has
been adjusted to be compliant with the RowStatus
textual description of SNPMv2-TC MIB. </p>
<p>Stefan Zegenhagen</p>
@@ -803,7 +803,7 @@
</item>
<item>
- <p>[compiler] The MIB compiler could not handle a table index
+ <p>[compiler] The MIB compiler could not handle a table index
that was defined later in the MIB. </p>
<p>Own Id: OTP-10808</p>
</item>
@@ -836,7 +836,7 @@
<title>SNMP Development Toolkit 4.23</title>
<!--
<p>Version 4.23 supports code replacement in runtime from/to
- version 4.22.1,
+ version 4.22.1,
4.22, 4.21.7 4.21.6 4.21.5, 4.21.4, 4.21.3, 4.21.2, 4.21.1 and 4.21. </p>
-->
@@ -848,14 +848,14 @@
<list type="bulleted">
<item>
- <p>[manager] Polish return values of snmpm_user_default according
+ <p>[manager] Polish return values of snmpm_user_default according
to snmpm_user doc.</p>
<p>Luca Favatella</p>
<p>Own Id: OTP-10671</p>
</item>
<item>
- <p>[agent] Remove runtime warning in snmpa_agent because of
+ <p>[agent] Remove runtime warning in snmpa_agent because of
tuple fun usage. </p>
<p>Luca Favatella</p>
<p>Own Id: OTP-10672</p>
@@ -877,10 +877,10 @@
<!--
<list type="bulleted">
<item>
- <p>[agent] Simultaneous
- <seealso marker="snmpa#backup">snmpa:backup/1,2</seealso>
+ <p>[agent] Simultaneous
+ <seealso marker="snmpa#backup">snmpa:backup/1,2</seealso>
calls can interfere.
- The master agent did not check if a backup was already in
+ The master agent did not check if a backup was already in
progress when a backup request was accepted. </p>
<p>Own Id: OTP-9884</p>
<p>Aux Id: Seq 11995</p>
@@ -913,7 +913,7 @@
<section>
<title>SNMP Development Toolkit 4.22.1</title>
<p>Version 4.22.1 supports code replacement in runtime from/to
- version 4.22, 4.21.7 4.21.6 4.21.5, 4.21.4, 4.21.3, 4.21.2, 4.21.1 and
+ version 4.22, 4.21.7 4.21.6 4.21.5, 4.21.4, 4.21.3, 4.21.2, 4.21.1 and
4.21. </p>
<section>
@@ -925,15 +925,15 @@
<list type="bulleted">
<item>
<p>[agent] Sematic fixes to SNMP-USER-BASED-SM-MIB.
- The semantics allow the <c>usmUserAuthKeyChange</c> and
- <c>usmUserPrivKeyChange</c> objects to be written to in the
- same set requests that also creates and clones the user.
- This was not possible beforehand, causing test tools checking
+ The semantics allow the <c>usmUserAuthKeyChange</c> and
+ <c>usmUserPrivKeyChange</c> objects to be written to in the
+ same set requests that also creates and clones the user.
+ This was not possible beforehand, causing test tools checking
semantic SNMPv3 behaviour to fail on a lot of test cases. </p>
- <p>Furthermore, once the user has been cloned by writing to an
- instance of <c>usmUserCloneFrom</c>, further set-operations to
- the same object will not return an error, but be no-ops.
- Especially, it must be avoided to copy security parameters
+ <p>Furthermore, once the user has been cloned by writing to an
+ instance of <c>usmUserCloneFrom</c>, further set-operations to
+ the same object will not return an error, but be no-ops.
+ Especially, it must be avoided to copy security parameters
again (possibly even from a different user). </p>
<p>Stefan Zegenhagen</p>
<p>Own Id: OTP-10166</p>
@@ -941,14 +941,14 @@
<item>
<p>[agent] Errors in <c>vacmAccessTable</c> RowStatus handling.
- There are problems with the handling of vacmAccessTableStatus
+ There are problems with the handling of vacmAccessTableStatus
that cause some SNMP test suites to report errors.
- Most notably, erroneous set operations frequently cause "genErr"
- errors to be returned. These "genErr" errors are usually caused
- by badmatch exceptions coming from
- <c>{ok, Row} = snmpa_vacm:get_row(RowIndex)</c>
+ Most notably, erroneous set operations frequently cause "genErr"
+ errors to be returned. These "genErr" errors are usually caused
+ by badmatch exceptions coming from
+ <c>{ok, Row} = snmpa_vacm:get_row(RowIndex)</c>
if the row does not exist. </p>
- <p>The semantics of the RowStatus handling in that table has
+ <p>The semantics of the RowStatus handling in that table has
been adjusted to be compliant with the RowStatus
textual description of SNPMv2-TC MIB. </p>
<p>Stefan Zegenhagen</p>
@@ -967,24 +967,24 @@
<list type="bulleted">
<item>
<p>[agent] Fix walk over vacmAccessTable.
- Fix the get_next implementation of vacmAccessTable to
+ Fix the get_next implementation of vacmAccessTable to
return all table entries. </p>
- <p>The get_next implementation of vacmAccessTable did not return
- all available table data. Instead, it only returned the first
+ <p>The get_next implementation of vacmAccessTable did not return
+ all available table data. Instead, it only returned the first
column for each row, and all columns for the last row available. </p>
<p>Stefan Zegenhagen</p>
<p>Own Id: OTP-10165</p>
</item>
<item>
- <p>[manager]
- <seealso marker="snmpm#log_to_io">snmpm:log_to_io/6</seealso>
+ <p>[manager]
+ <seealso marker="snmpm#log_to_io">snmpm:log_to_io/6</seealso>
did not use the LogName argument. </p>
<p>Own Id: OTP-10066</p>
</item>
<item>
- <p>Incorrect TimeTicks decode. Also bad handling of
+ <p>Incorrect TimeTicks decode. Also bad handling of
invalid encode (value outside of value range) for both
<c>TimeTicks</c> and <c>Unsigned32</c>. </p>
<p>Own Id: OTP-10132</p>
@@ -1015,38 +1015,38 @@
<list type="bulleted">
<item>
- <p>[compiler] The table information the MIB compiler provides with
- augmented tables has been extended with <c>nbr_of_cols</c>,
+ <p>[compiler] The table information the MIB compiler provides with
+ augmented tables has been extended with <c>nbr_of_cols</c>,
<c>first_accessible</c> and <c>not_accessible</c>. </p>
<p>Own Id: OTP-9969</p>
</item>
<item>
- <p>Added the <c>log_to_io</c> audit-trail-log converter function
- to the api modules of both the
- <seealso marker="snmpm#log_to_io">manager</seealso>
- and
+ <p>Added the <c>log_to_io</c> audit-trail-log converter function
+ to the api modules of both the
+ <seealso marker="snmpm#log_to_io">manager</seealso>
+ and
<seealso marker="snmpa#log_to_io">agent</seealso>. </p>
<p>Own Id: OTP-9940</p>
</item>
<item>
- <p>[manager] Introduced a new transport module,
- <c>snmpm_net_if_mt</c>,
- which handles all incomming and outgoing
+ <p>[manager] Introduced a new transport module,
+ <c>snmpm_net_if_mt</c>,
+ which handles all incomming and outgoing
traffic in newly created processes. The message/request is
processed and then the process exits. </p>
<p>Own Id: OTP-9876</p>
</item>
<item>
- <p>[agent] Documenting previously existing but undocumented function,
+ <p>[agent] Documenting previously existing but undocumented function,
<seealso marker="snmp_generic#get_table_info">snmp_generic:get_table_info/2</seealso>. </p>
<p>Own Id: OTP-9942</p>
</item>
<item>
- <p>[agent] Improve error handling while reading agent config files.
+ <p>[agent] Improve error handling while reading agent config files.
Some files contain mandatory information and is therefor themself
mandatory. </p>
<p>Own Id: OTP-9943</p>
@@ -1062,10 +1062,10 @@
<!--
<list type="bulleted">
<item>
- <p>[agent] Simultaneous
- <seealso marker="snmpa#backup">snmpa:backup/1,2</seealso>
+ <p>[agent] Simultaneous
+ <seealso marker="snmpa#backup">snmpa:backup/1,2</seealso>
calls can interfere.
- The master agent did not check if a backup was already in
+ The master agent did not check if a backup was already in
progress when a backup request was accepted. </p>
<p>Own Id: OTP-9884</p>
<p>Aux Id: Seq 11995</p>
@@ -1087,7 +1087,7 @@
<section>
<title>SNMP Development Toolkit 4.21.7</title>
<p>Version 4.21.7 supports code replacement in runtime from/to
- version 4.21.6, 4.21.5, 4.21.4, 4.21.3, 4.21.2, 4.21.1, 4.21, 4.20.1 and
+ version 4.21.6, 4.21.5, 4.21.4, 4.21.3, 4.21.2, 4.21.1, 4.21, 4.20.1 and
4.20. </p>
<section>
@@ -1097,13 +1097,13 @@
<!--
<list type="bulleted">
<item>
- <p>[agent] DoS attack using GET-BULK with large value of
+ <p>[agent] DoS attack using GET-BULK with large value of
MaxRepetitions.
- A preventive method has been implementing by simply
- limit the number of varbinds that can be included in
- a Get-BULK response message. This is specified by the
- new config option,
- <seealso marker="snmp_app#agent_gb_max_vbs">gb_max_vbs</seealso>.
+ A preventive method has been implementing by simply
+ limit the number of varbinds that can be included in
+ a Get-BULK response message. This is specified by the
+ new config option,
+ <seealso marker="snmp_app#agent_gb_max_vbs">gb_max_vbs</seealso>.
</p>
<p>Own Id: OTP-9700</p>
</item>
@@ -1121,10 +1121,10 @@
<list type="bulleted">
<item>
- <p>[agent] Simultaneous
- <seealso marker="snmpa#backup">snmpa:backup/1,2</seealso>
+ <p>[agent] Simultaneous
+ <seealso marker="snmpa#backup">snmpa:backup/1,2</seealso>
calls can interfere.
- The master agent did not check if a backup was already in
+ The master agent did not check if a backup was already in
progress when a backup request was accepted. </p>
<p>Own Id: OTP-9884</p>
<p>Aux Id: Seq 11995</p>
@@ -1145,7 +1145,7 @@
<section>
<title>SNMP Development Toolkit 4.21.6</title>
<p>Version 4.21.6 supports code replacement in runtime from/to
- version 4.21.5, 4.21.4, 4.21.3, 4.21.2, 4.21.1, 4.21, 4.20.1 and
+ version 4.21.5, 4.21.4, 4.21.3, 4.21.2, 4.21.1, 4.21, 4.20.1 and
4.20. </p>
<section>
@@ -1156,13 +1156,13 @@
<list type="bulleted">
<item>
- <p>[agent] DoS attack using GET-BULK with large value of
+ <p>[agent] DoS attack using GET-BULK with large value of
MaxRepetitions.
- A preventive method has been implementing by simply
- limit the number of varbinds that can be included in
- a Get-BULK response message. This is specified by the
- new config option,
- <seealso marker="snmp_app#agent_gb_max_vbs">gb_max_vbs</seealso>.
+ A preventive method has been implementing by simply
+ limit the number of varbinds that can be included in
+ a Get-BULK response message. This is specified by the
+ new config option,
+ <seealso marker="snmp_app#agent_gb_max_vbs">gb_max_vbs</seealso>.
</p>
<p>Own Id: OTP-9700</p>
</item>
@@ -1179,11 +1179,11 @@
<list type="bulleted">
<item>
- <p>[agent] Mib server cache gclimit update function incorrectly calls
- age update function.
- The gclimit update function,
- <seealso marker="snmpa#update_mibs_cache_gclimit">update_mibs_cache_gclimit/1</seealso>,
- <em>incorrectly</em> called the age update function,
+ <p>[agent] Mib server cache gclimit update function incorrectly calls
+ age update function.
+ The gclimit update function,
+ <seealso marker="snmpa#update_mibs_cache_gclimit">update_mibs_cache_gclimit/1</seealso>,
+ <em>incorrectly</em> called the age update function,
<seealso marker="snmpa#update_mibs_cache_age">update_mibs_cache_age/2</seealso>. </p>
<p>Johan Claesson</p>
<p>Own Id: OTP-9868</p>
@@ -1225,18 +1225,18 @@
<section>
<title>Fixed Bugs and Malfunctions</title>
<!--
- <p>-</p>
+ <p>-</p>
-->
<list type="bulleted">
<item>
- <p>[agent] Repeated vacm table dumping fails due to file name
- conflict. When dumping the vacm table to disk, a temoporary
- file with a fixed name was used. If the table dumping
- (snmpa_vacm:dump_table/0) was initiated from several different
- processes in rapid succesion, the dumping could fail because the
- different processes was simultaniously trying to write to the
- same file. This problem has been eliminated by creating a unique
+ <p>[agent] Repeated vacm table dumping fails due to file name
+ conflict. When dumping the vacm table to disk, a temoporary
+ file with a fixed name was used. If the table dumping
+ (snmpa_vacm:dump_table/0) was initiated from several different
+ processes in rapid succesion, the dumping could fail because the
+ different processes was simultaniously trying to write to the
+ same file. This problem has been eliminated by creating a unique
name for the temporary file. </p>
<p>Own Id: OTP-9851</p>
<p>Aux Id: Seq 11980</p>
@@ -1277,7 +1277,7 @@
<!--
<list type="bulleted">
<item>
- <p>[compiler] Improved version info printout from the
+ <p>[compiler] Improved version info printout from the
<seealso marker="snmpc(command)#">MIB compiler frontend escript</seealso>. </p>
<p>Own Id: OTP-9618</p>
</item>
@@ -1290,7 +1290,7 @@
<section>
<title>Fixed Bugs and Malfunctions</title>
<!--
- <p>-</p>
+ <p>-</p>
-->
<list type="bulleted">
@@ -1334,7 +1334,7 @@
<list type="bulleted">
<item>
- <p>[compiler] Improved version info printout from the
+ <p>[compiler] Improved version info printout from the
<seealso marker="snmpc(command)#">MIB compiler frontend escript</seealso>. </p>
<p>Own Id: OTP-9618</p>
</item>
@@ -1346,27 +1346,27 @@
<section>
<title>Fixed Bugs and Malfunctions</title>
<!--
- <p>-</p>
+ <p>-</p>
-->
<list type="bulleted">
<item>
- <p>[agent] Version 4.20 introduced a change that broke trap
- sending from subagents. Due to a bug in the test code,
+ <p>[agent] Version 4.20 introduced a change that broke trap
+ sending from subagents. Due to a bug in the test code,
this was not discovered, until that bug was fixed. </p>
<p>Own Id: OTP-9745</p>
</item>
<item>
- <p>[agent] When sending an error message (reply) regarding
+ <p>[agent] When sending an error message (reply) regarding
<c>snmpUnknownPDUHandlers</c>, the agent used the wrong OID. </p>
<p>Own Id: OTP-9747</p>
</item>
<item>
- <p>[compiler] Fix the <c>--warnings/--W</c> option parsing in the
+ <p>[compiler] Fix the <c>--warnings/--W</c> option parsing in the
<seealso marker="snmpc(command)#option_warnings">snmpc</seealso>
- wrapper (e)script.
+ wrapper (e)script.
The short warning option was incorrectly <c>--w</c>, instead
of as documented <c>--W</c>. This has now been corrected. </p>
<p>*** POTENTIAL INCOMPATIBILITY ***</p>
@@ -1386,7 +1386,7 @@
<list type="bulleted">
<item>
- <p>[compiler] The short warning option has been changed from
+ <p>[compiler] The short warning option has been changed from
<c>--w</c> to <c>--W</c> to comply with the documentation. </p>
<p>Tuncer Ayaz</p>
<p>Own Id: OTP-9718</p>
@@ -1410,7 +1410,7 @@
<!--
<list type="bulleted">
<item>
- <p>Bad note store GC timer deactivation.
+ <p>Bad note store GC timer deactivation.
Wrong field in the state record was set (timeout instead active). </p>
<p>Stefan Grundmann</p>
<p>Own Id: OTP-9690</p>
@@ -1424,12 +1424,12 @@
<section>
<title>Fixed Bugs and Malfunctions</title>
<!--
- <p>-</p>
+ <p>-</p>
-->
<list type="bulleted">
<item>
- <p>Bad note store GC timer deactivation.
+ <p>Bad note store GC timer deactivation.
Wrong field in the state record was set (timeout instead active). </p>
<p>Stefan Grundmann</p>
<p>Own Id: OTP-9690</p>
@@ -1459,13 +1459,13 @@
-->
<list type="bulleted">
<item>
- <p>[compiler] Used wrong variable name (for
- warnings-as-errors variable), which caused the
+ <p>[compiler] Used wrong variable name (for
+ warnings-as-errors variable), which caused the
compiler to crash when using the snmpc (e)script. </p>
- <p>Also added the option
+ <p>Also added the option
<seealso marker="snmpc(command)#option_werror">--Werror</seealso>
- for the SNMP MIB compiler (escript) frontend (to mimic
- <seealso marker="erts:erlc">erlc</seealso>),
+ for the SNMP MIB compiler (escript) frontend (to mimic
+ <seealso marker="erts:erlc">erlc</seealso>),
which specifies whether warnings should be treated as errors. </p>
<p>Own Id: OTP-9447</p>
</item>
@@ -1480,12 +1480,12 @@
<section>
<title>Fixed Bugs and Malfunctions</title>
- <p>-</p>
+ <p>-</p>
<!--
<list type="bulleted">
<item>
- <p>The snmp config tool could not handle (manager) audit trail config
+ <p>The snmp config tool could not handle (manager) audit trail config
because the option seqno was not handled. </p>
<p>Own Id: OTP-9354</p>
</item>
@@ -1515,15 +1515,15 @@
-->
<list type="bulleted">
<item>
- <p>[manager] There was no way to specify transport domain.
+ <p>[manager] There was no way to specify transport domain.
The transport domains was assumed to be IPv4 (transportDomainUdpIpv4).
- This has now been changed so that it can also be IPv6
- (transportDomainUdpIpv6).
- To facilitate this, the transport domain, <c>tdomain</c>,
- is now a (new) valid option when
+ This has now been changed so that it can also be IPv6
+ (transportDomainUdpIpv6).
+ To facilitate this, the transport domain, <c>tdomain</c>,
+ is now a (new) valid option when
<seealso marker="snmpm#register_agent">registering</seealso>
- a new agent (and
- <seealso marker="snmpm#update_agent_info">updating</seealso>
+ a new agent (and
+ <seealso marker="snmpm#update_agent_info">updating</seealso>
agent info). </p>
<p>This also mean that the transport behaviour has changed. </p>
<p>Own Id: OTP-9305</p>
@@ -1531,10 +1531,10 @@
</item>
<item>
- <p>[compiler] Added the option
- <seealso marker="snmpc#compile">warnings_as_errors</seealso>
- (for the SNMP MIB compiler (escript) frontend, the option
- <seealso marker="snmpc(command)#option_wae">--wae</seealso> is used)
+ <p>[compiler] Added the option
+ <seealso marker="snmpc#compile">warnings_as_errors</seealso>
+ (for the SNMP MIB compiler (escript) frontend, the option
+ <seealso marker="snmpc(command)#option_wae">--wae</seealso> is used)
which specifies whether warnings should be treated as errors. </p>
<p>Tuncer Ayaz</p>
<p>Own Id: OTP-9437</p>
@@ -1546,12 +1546,12 @@
<section>
<title>Fixed Bugs and Malfunctions</title>
<!--
- <p>-</p>
+ <p>-</p>
-->
<list type="bulleted">
<item>
- <p>The snmp config tool could not handle (manager) audit trail config
+ <p>The snmp config tool could not handle (manager) audit trail config
because the option seqno was not handled. </p>
<p>Own Id: OTP-9354</p>
</item>
@@ -1605,11 +1605,11 @@
<section>
<title>Fixed Bugs and Malfunctions</title>
<!--
- <p>-</p>
+ <p>-</p>
-->
<list type="bulleted">
<item>
- <p>[agent] Did not handle transport domains properly in some cases,
+ <p>[agent] Did not handle transport domains properly in some cases,
for instance trap sending. </p>
<p>Own Id: OTP-9400</p>
</item>
@@ -1646,9 +1646,9 @@
<list type="bulleted">
<item>
<p>[agent] Added support for sending traps to IPv6 targets. </p>
- <p>See the
- <seealso marker="snmp_agent_config_files#target_addr">target address config file</seealso>,
- the <seealso marker="snmpa_conf#target_addr_entry">target_addr_entry/11</seealso> function or
+ <p>See the
+ <seealso marker="snmp_agent_config_files#target_addr">target address config file</seealso>,
+ the <seealso marker="snmpa_conf#target_addr_entry">target_addr_entry/11</seealso> function or
<seealso marker="snmp_target_mib#add_addr">add_addr/11</seealso> for more info. </p>
<p>Own Id: OTP-9088</p>
<p>Aux Id: Seq 11790</p>
@@ -1657,7 +1657,7 @@
<item>
<p>[agent] To be able to handle multiple engine-id(s) when
- sending trap(s), the function
+ sending trap(s), the function
<seealso marker="snmp_community_mib#add_community">
add_community/6</seealso> has been added. </p>
<p>Own Id: OTP-9119</p>
@@ -1667,14 +1667,14 @@
<item>
<p>[manager] The API for snmp requests has been augmented to
allow the caller to override some configuration. </p>
- <p>This has been done by introducing a new set of API functions, see
- <seealso marker="snmpm#sync_get2">sync_get2/3,4</seealso>,
- <seealso marker="snmpm#async_get2">async_get2/3,4</seealso>,
- <seealso marker="snmpm#sync_get_next2">sync_get_next2/3,4</seealso>,
- <seealso marker="snmpm#async_get_next2">async_get_next2/3,4</seealso>,
- <seealso marker="snmpm#sync_get_bulk2">sync_get_bulk2/5,6</seealso>,
- <seealso marker="snmpm#async_get_bulk2">async_get_bulk2/5,6</seealso>,
- <seealso marker="snmpm#sync_set2">sync_set2/3,4</seealso> and
+ <p>This has been done by introducing a new set of API functions, see
+ <seealso marker="snmpm#sync_get2">sync_get2/3,4</seealso>,
+ <seealso marker="snmpm#async_get2">async_get2/3,4</seealso>,
+ <seealso marker="snmpm#sync_get_next2">sync_get_next2/3,4</seealso>,
+ <seealso marker="snmpm#async_get_next2">async_get_next2/3,4</seealso>,
+ <seealso marker="snmpm#sync_get_bulk2">sync_get_bulk2/5,6</seealso>,
+ <seealso marker="snmpm#async_get_bulk2">async_get_bulk2/5,6</seealso>,
+ <seealso marker="snmpm#sync_set2">sync_set2/3,4</seealso> and
<seealso marker="snmpm#async_set2">async_set2/3,4</seealso>
for more info. </p>
<p>Own Id: OTP-9162</p>
@@ -1682,8 +1682,8 @@
<item>
<p>[manager] The old API functions (for get and set
- requests:
- snmpm:g/3,4,5,6,7, snmpm:ag/3,4,5,6,7,
+ requests:
+ snmpm:g/3,4,5,6,7, snmpm:ag/3,4,5,6,7,
snmpm:gn/3,4,5,6,7, snmpm:agn/3,4,5,6,7,
snmpm:s/3,4,5,6,7, snmpm:s/3,4,5,6,7,
snmpm:gb/5,6,7,8,9 and snmpm:agb/5,6,7,8,9)
@@ -1695,12 +1695,12 @@
<item>
<p>[agent] Pass extra info through the agent to the net-if
process when sending notifications. </p>
- <p>See
+ <p>See
<seealso marker="snmpa#send_notification2">
- snmpa:send_notification2/3</seealso> for more info.
- See also the incomming net-if messages when sending a
- <seealso marker="snmp_agent_netif#im_send_pdu">trap</seealso>
- (send_pdu message) and
+ snmpa:send_notification2/3</seealso> for more info.
+ See also the incomming net-if messages when sending a
+ <seealso marker="snmp_agent_netif#im_send_pdu">trap</seealso>
+ (send_pdu message) and
<seealso marker="snmp_agent_netif#im_send_pdu_req">
notification</seealso> (send_pdu_req message). </p>
<p>Own Id: OTP-9183</p>
@@ -1718,15 +1718,15 @@
<section>
<title>Fixed Bugs and Malfunctions</title>
<!--
- <p>-</p>
+ <p>-</p>
-->
<list type="bulleted">
<item>
<p>Fixed endode/decode of values of type <c>Counter32</c>. </p>
- <p>This type (<c>Counter32</c>) is an unsigned integer 32,
- but is actually encoded as an signed integer 32.
- The encode/decode functions however, treated it as if it was
+ <p>This type (<c>Counter32</c>) is an unsigned integer 32,
+ but is actually encoded as an signed integer 32.
+ The encode/decode functions however, treated it as if it was
encodeded as an unsigned integer 32. </p>
<p>Own Id: OTP-9022</p>
</item>
@@ -1741,12 +1741,4 @@
</section>
</section> <!-- 4.20 -->
-
-
- <!-- section>
- <title>Release notes history</title>
- <p>For information about older versions see
- <url href="part_notes_history_frame.html">release notes history</url>.</p>
- </section -->
</chapter>
-