diff options
Diffstat (limited to 'lib/snmp/mibs/TRANSPORT-ADDRESS-MIB.mib')
| -rw-r--r-- | lib/snmp/mibs/TRANSPORT-ADDRESS-MIB.mib | 417 |
1 files changed, 417 insertions, 0 deletions
diff --git a/lib/snmp/mibs/TRANSPORT-ADDRESS-MIB.mib b/lib/snmp/mibs/TRANSPORT-ADDRESS-MIB.mib new file mode 100644 index 0000000000..7d450fbc2a --- /dev/null +++ b/lib/snmp/mibs/TRANSPORT-ADDRESS-MIB.mib @@ -0,0 +1,417 @@ +TRANSPORT-ADDRESS-MIB DEFINITIONS ::= BEGIN + +IMPORTS + MODULE-IDENTITY, OBJECT-IDENTITY, mib-2 FROM SNMPv2-SMI + TEXTUAL-CONVENTION FROM SNMPv2-TC; + +transportAddressMIB MODULE-IDENTITY + LAST-UPDATED "200211010000Z" + ORGANIZATION + "IETF Operations and Management Area" + CONTACT-INFO + "Juergen Schoenwaelder (Editor) + TU Braunschweig + Bueltenweg 74/75 + 38106 Braunschweig, Germany + Phone: +49 531 391-3289 + EMail: [email protected] + + Send comments to <[email protected]>." + DESCRIPTION + "This MIB module provides commonly used transport + address definitions. + + Copyright (C) The Internet Society (2002). This version of + this MIB module is part of RFC 3419; see the RFC itself for + full legal notices." + + -- Revision log + + REVISION "200211010000Z" + DESCRIPTION + "Initial version, published as RFC 3419." + ::= { mib-2 100 } + + +transportDomains OBJECT IDENTIFIER ::= { transportAddressMIB 1 } + +transportDomainUdpIpv4 OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The UDP over IPv4 transport domain. The corresponding + transport address is of type TransportAddressIPv4 for + global IPv4 addresses." + ::= { transportDomains 1 } + +transportDomainUdpIpv6 OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The UDP over IPv6 transport domain. The corresponding + transport address is of type TransportAddressIPv6 for + global IPv6 addresses." + ::= { transportDomains 2 } + +transportDomainUdpIpv4z OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The UDP over IPv4 transport domain. The corresponding + transport address is of type TransportAddressIPv4z for + scoped IPv4 addresses with a zone index." + ::= { transportDomains 3 } + +transportDomainUdpIpv6z OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The UDP over IPv6 transport domain. The corresponding + transport address is of type TransportAddressIPv6z for + scoped IPv6 addresses with a zone index." + ::= { transportDomains 4 } + +transportDomainTcpIpv4 OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The TCP over IPv4 transport domain. The corresponding + transport address is of type TransportAddressIPv4 for + global IPv4 addresses." + ::= { transportDomains 5 } + +transportDomainTcpIpv6 OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The TCP over IPv6 transport domain. The corresponding + transport address is of type TransportAddressIPv6 for + global IPv6 addresses." + ::= { transportDomains 6 } + +transportDomainTcpIpv4z OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The TCP over IPv4 transport domain. The corresponding + transport address is of type TransportAddressIPv4z for + scoped IPv4 addresses with a zone index." + ::= { transportDomains 7 } + +transportDomainTcpIpv6z OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The TCP over IPv6 transport domain. The corresponding + transport address is of type TransportAddressIPv6z for + scoped IPv6 addresses with a zone index." + ::= { transportDomains 8 } + +transportDomainSctpIpv4 OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The SCTP over IPv4 transport domain. The corresponding + transport address is of type TransportAddressIPv4 for + global IPv4 addresses. This transport domain usually + represents the primary address on multihomed SCTP + endpoints." + ::= { transportDomains 9 } + +transportDomainSctpIpv6 OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The SCTP over IPv6 transport domain. The corresponding + transport address is of type TransportAddressIPv6 for + global IPv6 addresses. This transport domain usually + represents the primary address on multihomed SCTP + endpoints." + ::= { transportDomains 10 } + +transportDomainSctpIpv4z OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The SCTP over IPv4 transport domain. The corresponding + transport address is of type TransportAddressIPv4z for + scoped IPv4 addresses with a zone index. This transport + domain usually represents the primary address on + multihomed SCTP endpoints." + ::= { transportDomains 11 } + +transportDomainSctpIpv6z OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The SCTP over IPv6 transport domain. The corresponding + transport address is of type TransportAddressIPv6z for + scoped IPv6 addresses with a zone index. This transport + domain usually represents the primary address on + multihomed SCTP endpoints." + ::= { transportDomains 12 } + +transportDomainLocal OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The Posix Local IPC transport domain. The corresponding + transport address is of type TransportAddressLocal. + + The Posix Local IPC transport domain incorporates the + well-known UNIX domain sockets." + ::= { transportDomains 13 } + +transportDomainUdpDns OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The UDP transport domain using fully qualified domain + names. The corresponding transport address is of type + TransportAddressDns." + ::= { transportDomains 14 } + +transportDomainTcpDns OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The TCP transport domain using fully qualified domain + names. The corresponding transport address is of type + TransportAddressDns." + ::= { transportDomains 15 } + +transportDomainSctpDns OBJECT-IDENTITY + STATUS current + DESCRIPTION + "The SCTP transport domain using fully qualified domain + names. The corresponding transport address is of type + TransportAddressDns." + ::= { transportDomains 16 } + +TransportDomain ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A value that represents a transport domain. + + Some possible values, such as transportDomainUdpIpv4, are + defined in this module. Other possible values can be + defined in other MIB modules." + SYNTAX OBJECT IDENTIFIER + +-- +-- The enumerated values of the textual convention below should +-- be identical to the last sub-identifier of the OID registered +-- for the same domain. +-- + +TransportAddressType ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "A value that represents a transport domain. This is the + enumerated version of the transport domain registrations + in this MIB module. The enumerated values have the + following meaning: + + unknown(0) unknown transport address type + udpIpv4(1) transportDomainUdpIpv4 + udpIpv6(2) transportDomainUdpIpv6 + udpIpv4z(3) transportDomainUdpIpv4z + udpIpv6z(4) transportDomainUdpIpv6z + tcpIpv4(5) transportDomainTcpIpv4 + tcpIpv6(6) transportDomainTcpIpv6 + tcpIpv4z(7) transportDomainTcpIpv4z + tcpIpv6z(8) transportDomainTcpIpv6z + sctpIpv4(9) transportDomainSctpIpv4 + sctpIpv6(10) transportDomainSctpIpv6 + sctpIpv4z(11) transportDomainSctpIpv4z + sctpIpv6z(12) transportDomainSctpIpv6z + local(13) transportDomainLocal + udpDns(14) transportDomainUdpDns + tcpDns(15) transportDomainTcpDns + sctpDns(16) transportDomainSctpDns + + This textual convention can be used to represent transport + domains in situations where a syntax of TransportDomain is + unwieldy (for example, when used as an index). + + The usage of this textual convention implies that additional + transport domains can only be supported by updating this MIB + module. This extensibility restriction does not apply for the + TransportDomain textual convention which allows MIB authors + to define additional transport domains independently in + other MIB modules." + SYNTAX INTEGER { + unknown(0), + udpIpv4(1), + udpIpv6(2), + udpIpv4z(3), + udpIpv6z(4), + tcpIpv4(5), + tcpIpv6(6), + tcpIpv4z(7), + tcpIpv6z(8), + sctpIpv4(9), + sctpIpv6(10), + sctpIpv4z(11), + sctpIpv6z(12), + local(13), + udpDns(14), + tcpDns(15), + sctpDns(16) + } + +TransportAddress ::= TEXTUAL-CONVENTION + STATUS current + DESCRIPTION + "Denotes a generic transport address. + + A TransportAddress value is always interpreted within the + context of a TransportAddressType or TransportDomain value. + Every usage of the TransportAddress textual convention MUST + specify the TransportAddressType or TransportDomain object + which provides the context. Furthermore, MIB authors SHOULD + define a separate TransportAddressType or TransportDomain + object for each TransportAddress object. It is suggested that + the TransportAddressType or TransportDomain is logically + registered before the object(s) which use the + TransportAddress textual convention if they appear in the + same logical row. + + The value of a TransportAddress object must always be + consistent with the value of the associated + TransportAddressType or TransportDomain object. Attempts + to set a TransportAddress object to a value which is + inconsistent with the associated TransportAddressType or + TransportDomain must fail with an inconsistentValue error. + + When this textual convention is used as a syntax of an + index object, there may be issues with the limit of 128 + sub-identifiers specified in SMIv2, STD 58. In this case, + the OBJECT-TYPE declaration MUST include a 'SIZE' clause + to limit the number of potential instance sub-identifiers." + SYNTAX OCTET STRING (SIZE (0..255)) + +TransportAddressIPv4 ::= TEXTUAL-CONVENTION + DISPLAY-HINT "1d.1d.1d.1d:2d" + STATUS current + DESCRIPTION + "Represents a transport address consisting of an IPv4 + address and a port number (as used for example by UDP, + TCP and SCTP): + + octets contents encoding + 1-4 IPv4 address network-byte order + 5-6 port number network-byte order + + This textual convention SHOULD NOT be used directly in object + definitions since it restricts addresses to a specific format. + However, if it is used, it MAY be used either on its own or + in conjunction with TransportAddressType or TransportDomain + as a pair." + SYNTAX OCTET STRING (SIZE (6)) + +TransportAddressIPv6 ::= TEXTUAL-CONVENTION + DISPLAY-HINT "0a[2x:2x:2x:2x:2x:2x:2x:2x]0a:2d" + STATUS current + DESCRIPTION + "Represents a transport address consisting of an IPv6 + address and a port number (as used for example by UDP, + TCP and SCTP): + + octets contents encoding + 1-16 IPv6 address network-byte order + 17-18 port number network-byte order + + This textual convention SHOULD NOT be used directly in object + definitions since it restricts addresses to a specific format. + However, if it is used, it MAY be used either on its own or + in conjunction with TransportAddressType or TransportDomain + as a pair." + SYNTAX OCTET STRING (SIZE (18)) + +TransportAddressIPv4z ::= TEXTUAL-CONVENTION + DISPLAY-HINT "1d.1d.1d.1d%4d:2d" + STATUS current + DESCRIPTION + "Represents a transport address consisting of an IPv4 + address, a zone index and a port number (as used for + example by UDP, TCP and SCTP): + + octets contents encoding + 1-4 IPv4 address network-byte order + 5-8 zone index network-byte order + 9-10 port number network-byte order + + This textual convention SHOULD NOT be used directly in object + definitions since it restricts addresses to a specific format. + However, if it is used, it MAY be used either on its own or + in conjunction with TransportAddressType or TransportDomain + as a pair." + SYNTAX OCTET STRING (SIZE (10)) + +TransportAddressIPv6z ::= TEXTUAL-CONVENTION + DISPLAY-HINT "0a[2x:2x:2x:2x:2x:2x:2x:2x%4d]0a:2d" + STATUS current + DESCRIPTION + "Represents a transport address consisting of an IPv6 + address, a zone index and a port number (as used for + example by UDP, TCP and SCTP): + + octets contents encoding + 1-16 IPv6 address network-byte order + 17-20 zone index network-byte order + 21-22 port number network-byte order + + This textual convention SHOULD NOT be used directly in object + definitions since it restricts addresses to a specific format. + However, if it is used, it MAY be used either on its own or + in conjunction with TransportAddressType or TransportDomain + as a pair." + SYNTAX OCTET STRING (SIZE (22)) + +TransportAddressLocal ::= TEXTUAL-CONVENTION + DISPLAY-HINT "1a" + STATUS current + DESCRIPTION + "Represents a POSIX Local IPC transport address: + + octets contents encoding + all POSIX Local IPC address string + + The Posix Local IPC transport domain subsumes UNIX domain + sockets. + + This textual convention SHOULD NOT be used directly in object + definitions since it restricts addresses to a specific format. + However, if it is used, it MAY be used either on its own or + in conjunction with TransportAddressType or TransportDomain + as a pair. + + When this textual convention is used as a syntax of an + index object, there may be issues with the limit of 128 + sub-identifiers specified in SMIv2, STD 58. In this case, + the OBJECT-TYPE declaration MUST include a 'SIZE' clause + to limit the number of potential instance sub-identifiers." + REFERENCE + "Protocol Independent Interfaces (IEEE POSIX 1003.1g)" + SYNTAX OCTET STRING (SIZE (1..255)) + +TransportAddressDns ::= TEXTUAL-CONVENTION + DISPLAY-HINT "1a" + STATUS current + DESCRIPTION + "Represents a DNS domain name followed by a colon ':' + (ASCII character 0x3A) and a port number in ASCII. + The name SHOULD be fully qualified whenever possible. + + Values of this textual convention are not directly useable as + transport-layer addressing information, and require runtime + resolution. As such, applications that write them must be + prepared for handling errors if such values are not + supported, or cannot be resolved (if resolution occurs at the + time of the management operation). + + The DESCRIPTION clause of TransportAddress objects that may + have TransportAddressDns values must fully describe how (and + when) such names are to be resolved to IP addresses and vice + versa. + + This textual convention SHOULD NOT be used directly in object + definitions since it restricts addresses to a specific format. + However, if it is used, it MAY be used either on its own or + in conjunction with TransportAddressType or TransportDomain + as a pair. + + When this textual convention is used as a syntax of an + index object, there may be issues with the limit of 128 + sub-identifiers specified in SMIv2, STD 58. In this case, + the OBJECT-TYPE declaration MUST include a 'SIZE' clause + to limit the number of potential instance sub-identifiers." + SYNTAX OCTET STRING (SIZE (1..255)) + +END |