diff options
Diffstat (limited to 'lib/snmp/test/test-mibs/INTERNAL-MIB.mib')
| -rw-r--r-- | lib/snmp/test/test-mibs/INTERNAL-MIB.mib | 463 |
1 files changed, 463 insertions, 0 deletions
diff --git a/lib/snmp/test/test-mibs/INTERNAL-MIB.mib b/lib/snmp/test/test-mibs/INTERNAL-MIB.mib new file mode 100644 index 0000000000..62d3777fc2 --- /dev/null +++ b/lib/snmp/test/test-mibs/INTERNAL-MIB.mib @@ -0,0 +1,463 @@ +INTERNAL-MIB DEFINITIONS ::= BEGIN + + IMPORTS + IpAddress + FROM RFC1155-SMI + DisplayString, mib-2 + FROM RFC1213-MIB + OBJECT-TYPE + FROM RFC-1212 + TruthValue, RowStatus + FROM STANDARD-MIB + ; + + + +-- Object Identifiers for all the Managed Objects must be defined +-- if this MIB (or parts of it) shall be loaded. +-- It is entirely up to the implementation to assign OIDs for the +-- objects. The SNMP agent does not rely on the OIDs, but on the +-- symbolic names of the managed objects. + +ericsson OBJECT IDENTIFIER ::= {enterprises 193} +snmpAdm OBJECT IDENTIFIER ::= {ericsson 1} +community OBJECT IDENTIFIER ::= {snmpAdm 1} +trap OBJECT IDENTIFIER ::= {snmpAdm 2} +view OBJECT IDENTIFIER ::= {snmpAdm 3} + + + -- Datatype + + StorageType ::= + INTEGER { + other(1), -- eh? + volatile(2), -- e.g., in RAM + nonVolatile(3), -- e.g., in NVRAM + permanent(4) -- e.g., in ROM + } + + -- Managed Objects + + intCommunityTable OBJECT-TYPE + SYNTAX SEQUENCE OF IntCommunityEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table defines access for the different + communities. + + When a request comes from a certain ip address, + referring to a community string, the mib view + and access corresponding to these are looked up + in this table. Then the operation is validatated against + the access, and all requested objects validated against + the mib view." + ::= { community 1} + + intCommunityEntry OBJECT-TYPE + SYNTAX IntCommunityEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "" + INDEX { intCommunityDestination, intCommunityString } + ::= { intCommunityTable 1 } + + IntCommunityEntry ::= + SEQUENCE { + intCommunityDestination IpAddress, + intCommunityString DisplayString, + intCommunityViewIndex INTEGER, + intCommunityAccess INTEGER, + intCommunityStatus RowStatus + } + + intCommunityDestination OBJECT-TYPE + SYNTAX IpAddress + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The ip address of a management station. The special + ip address {0.0.0.0} is a wildcard, meaning all possible + ip addresses. In this way, access can be granted to all + ip addressed for some communities." + ::= { intCommunityEntry 1 } + + intCommunityString OBJECT-TYPE + SYNTAX DisplayString + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The community string, defining the community." + ::= { intCommunityEntry 2 } + + intCommunityViewIndex OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Identifies a mib view. Index into the + intViewTable." + ::= { intCommunityEntry 3 } + + intCommunityAccess OBJECT-TYPE + SYNTAX INTEGER { read(1), readWrite(2) } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "Defines which operations the manager can perform + on the objects in the mib view." + ::= { intCommunityEntry 4 } + + intCommunityStatus OBJECT-TYPE + SYNTAX RowStatus + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The status of this conceptual row in the + intCommunityTable." + ::= { intCommunityEntry 5 } + + intAgentIpAddress OBJECT-TYPE + SYNTAX IpAddress + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The IP address of this agent." + ::= { community 2 } + + intAgentUDPPort OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The UDP port the agent listens to." + ::= { community 3 } + + intAgentMaxPacketSize OBJECT-TYPE + SYNTAX INTEGER (484..65535) + ACCESS read-only + STATUS mandatory + DESCRIPTION + "The maximum packet size in bytes this agent will send to a + manager." + ::= { community 4 } + + + intAddressTable OBJECT-TYPE + SYNTAX SEQUENCE OF IntAddressEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "This table holds UDP related information on each known + management station." + ::= { community 5 } + + + intAddressEntry OBJECT-TYPE + SYNTAX IntAddressEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "" + INDEX { intAddressDestination } + ::= { intAddressTable 1 } + + IntAddressEntry ::= + SEQUENCE { + intAddressDestination IpAddress, + intAddressUDPPort INTEGER, + intAddressMaxPacketSize INTEGER (484..65535), + intAddressStatus RowStatus + } + + intAddressDestination OBJECT-TYPE + SYNTAX IpAddress + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The ip address of the management station." + ::= { intAddressEntry 1 } + + intAddressUDPPort OBJECT-TYPE + SYNTAX INTEGER + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The UDP port to which traps will be sent to + this destination." + DEFVAL { 162 } + ::= { intAddressEntry 2 } + + intAddressMaxPacketSize OBJECT-TYPE + SYNTAX INTEGER (484..65535) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The maximum packet size in bytes for Messages + sent to this destination. The max size of a packet + sent to this destination will be the minumim of + this variable and agentMaxPacketSize.0." + ::= { intAddressEntry 3 } + + intAddressStatus OBJECT-TYPE + SYNTAX RowStatus + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The status of this conceptual row in the + intAddressTable." + ::= { intAddressEntry 4 } + + intTrapDestTable OBJECT-TYPE + SYNTAX SEQUENCE OF IntTrapDestEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "The intTrapDestTable defines to which destination all traps + for a specific community should be sent." + ::= { trap 1 } + + intTrapDestEntry OBJECT-TYPE + SYNTAX IntTrapDestEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "" + INDEX { intTrapDestCommunityString, intTrapDestDestination } + ::= { intTrapDestTable 1 } + + IntTrapDestEntry ::= + SEQUENCE { + intTrapDestCommunityString DisplayString, + intTrapDestDestination IpAddress, + intTrapDestStatus RowStatus, + intTrapDestSnmpVersion INTEGER + } + + intTrapDestCommunityString OBJECT-TYPE + SYNTAX DisplayString (SIZE (0..255)) + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "" + ::= { intTrapDestEntry 1 } + + intTrapDestDestination OBJECT-TYPE + SYNTAX IpAddress + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "" + ::= { intTrapDestEntry 2 } + + intTrapDestStatus OBJECT-TYPE + SYNTAX RowStatus + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The status of this conceptual row in the + intTrapDestTable." + ::= { intTrapDestEntry 3 } + + intTrapDestSnmpVersion OBJECT-TYPE + SYNTAX INTEGER { v1(1), v2c(2) } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The SNMP version of the manager. If it is v1, + SNMPv1Traps are sent. If it is v2c, + SNMPv2Traps are sent" + ::= { intTrapDestEntry 4 } + + intViewTable OBJECT-TYPE + SYNTAX SEQUENCE OF IntViewEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Locally held information about the MIB views + known to this agent. + + Each MIB view is defined by two + collections of view subtrees: the included view + subtrees, and the excluded view subtrees. Every + such subtree, both included and excluded, is + defined in this table. + + To determine if a particular object instance is in + a particular MIB view, compare the object + instance's OBJECT IDENTIFIER with each of the MIB + view's entries in this table. If none match, then + the object instance is not in the MIB view. If + one or more match, then the object instance is + included in, or excluded from, the MIB view + according to the value of viewType in the entry + whose value of viewSubtree has the most sub- + identifiers. If multiple entries match and have + the same number of sub-identifiers, then the + lexicographically greatest instance of viewType + determines the inclusion or exclusion. + + An object instance's OBJECT IDENTIFIER X matches + an entry in this table when the number of sub- + identifiers in X is at least as many as in the + value of viewSubtree for the entry, and each sub- + identifier in the value of viewSubtree matches its + corresponding sub-identifier in X. Two sub- + identifiers match either if the corresponding bit + of viewMask is zero (the 'wild card' value), or if + they are equal. + + Due to this 'wild card' capability, we introduce + the term, a 'family' of view subtrees, to refer to + the set of subtrees defined by a particular + combination of values of viewSubtree and viewMask. + In the case where no 'wild card' is defined in + viewMask, the family of view subtrees reduces to a + single view subtree." + ::= { view 1 } + + intViewEntry OBJECT-TYPE + SYNTAX IntViewEntry + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "Information on a particular family of view + subtrees included in or excluded from a particular + MIB view. + + Implementations must not restrict the number of + families of view subtrees for a given MIB view, + except as dictated by resource constraints on the + overall number of entries in the viewTable." + INDEX { intViewIndex, intViewSubtree } + ::= { intViewTable 1 } + + IntViewEntry ::= + SEQUENCE { + intViewIndex INTEGER, + intViewSubtree OBJECT IDENTIFIER, + intViewMask OCTET STRING, + intViewType INTEGER, + intViewStorageType StorageType, + intViewStatus RowStatus + } + + + intViewIndex OBJECT-TYPE + SYNTAX INTEGER (1..65535) + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A unique value for each MIB view. The value for + each MIB view must remain constant at least from + one re-initialization of the entity's network + management system to the next re-initialization." + ::= { intViewEntry 1 } + + intViewSubtree OBJECT-TYPE + SYNTAX OBJECT IDENTIFIER + ACCESS not-accessible + STATUS mandatory + DESCRIPTION + "A MIB subtree." + ::= { intViewEntry 2 } + + intViewMask OBJECT-TYPE + SYNTAX OCTET STRING (SIZE (0..16)) + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The bit mask which, in combination with the + corresponding instance of viewSubtree, defines a + family of view subtrees. + + Each bit of this bit mask corresponds to a sub- + identifier of viewSubtree, with the most + significant bit of the i-th octet of this octet + string value (extended if necessary, see below) + corresponding to the (8*i - 7)-th sub-identifier, + and the least significant bit of the i-th octet of + this octet string corresponding to the (8*i)-th + sub-identifier, where i is in the range 1 through + 16. + + Each bit of this bit mask specifies whether or not + the corresponding sub-identifiers must match when + determining if an OBJECT IDENTIFIER is in this + family of view subtrees; a '1' indicates that an + exact match must occur; a '0' indicates 'wild + card', i.e., any sub-identifier value matches. + + + Thus, the OBJECT IDENTIFIER X of an object + instance is contained in a family of view subtrees + if the following criteria are met: + + for each sub-identifier of the value of + viewSubtree, either: + + the i-th bit of viewMask is 0, or + + the i-th sub-identifier of X is equal to + the i-th sub-identifier of the value of + viewSubtree. + + If the value of this bit mask is M bits long and + there are more than M sub-identifiers in the + corresponding instance of viewSubtree, then the + bit mask is extended with 1's to be the required + length. + + Note that when the value of this object is the + zero-length string, this extension rule results in + a mask of all-1's being used (i.e., no 'wild + card'), and the family of view subtrees is the one + view subtree uniquely identified by the + corresponding instance of viewSubtree." + DEFVAL { ''H } + ::= { intViewEntry 3 } + + + intViewType OBJECT-TYPE + SYNTAX INTEGER { + included(1), + excluded(2) + } + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The status of a particular family of view + subtrees within the particular + MIB view. The value 'included(1)' indicates that + the corresponding instances of viewSubtree and + viewMask define a family of view subtrees included + in the MIB view. The value 'excluded(2)' + indicates that the corresponding instances of + viewSubtree and viewMask define a family of view + subtrees excluded from the MIB view." + DEFVAL { included } + ::= { intViewEntry 4 } + + intViewStorageType OBJECT-TYPE + SYNTAX StorageType + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The storage type for this conceptual row in the + intViewTable." + DEFVAL { nonVolatile } + ::= { intViewEntry 5 } + + intViewStatus OBJECT-TYPE + SYNTAX RowStatus + ACCESS read-write + STATUS mandatory + DESCRIPTION + "The status of this conceptual row in the + intViewTable." + ::= { intViewEntry 6 } + + + +END |