aboutsummaryrefslogtreecommitdiffstats
path: root/lib/snmp
diff options
context:
space:
mode:
Diffstat (limited to 'lib/snmp')
-rw-r--r--lib/snmp/doc/src/notes.xml138
-rw-r--r--lib/snmp/doc/src/snmp.xml28
-rw-r--r--lib/snmp/doc/src/snmp_app.xml12
-rw-r--r--lib/snmp/doc/src/snmp_config.xml12
-rw-r--r--lib/snmp/doc/src/snmp_generic.xml81
-rw-r--r--lib/snmp/doc/src/snmp_manager_netif.xml43
-rw-r--r--lib/snmp/doc/src/snmpa.xml32
-rw-r--r--lib/snmp/doc/src/snmpm.xml34
-rw-r--r--lib/snmp/doc/src/snmpm_network_interface_filter.xml9
-rw-r--r--lib/snmp/examples/ex2/snmp_ex2_manager.erl13
-rw-r--r--lib/snmp/include/snmp_types.hrl25
-rw-r--r--lib/snmp/src/agent/snmp_community_mib.erl19
-rw-r--r--lib/snmp/src/agent/snmp_framework_mib.erl27
-rw-r--r--lib/snmp/src/agent/snmp_notification_mib.erl19
-rw-r--r--lib/snmp/src/agent/snmp_standard_mib.erl28
-rw-r--r--lib/snmp/src/agent/snmp_target_mib.erl8
-rw-r--r--lib/snmp/src/agent/snmp_user_based_sm_mib.erl6
-rw-r--r--lib/snmp/src/agent/snmp_view_based_acm_mib.erl2
-rw-r--r--lib/snmp/src/agent/snmpa.erl24
-rw-r--r--lib/snmp/src/agent/snmpa_agent.erl2
-rw-r--r--lib/snmp/src/agent/snmpa_local_db.erl4
-rw-r--r--lib/snmp/src/agent/snmpa_mib.erl2
-rw-r--r--lib/snmp/src/app/snmp.app.src3
-rw-r--r--lib/snmp/src/app/snmp.appup.src525
-rw-r--r--lib/snmp/src/app/snmp.erl7
-rw-r--r--lib/snmp/src/compile/snmpc_lib.erl36
-rw-r--r--lib/snmp/src/manager/depend.mk9
-rw-r--r--lib/snmp/src/manager/modules.mk3
-rw-r--r--lib/snmp/src/manager/snmpm.erl25
-rw-r--r--lib/snmp/src/manager/snmpm_config.erl2
-rw-r--r--lib/snmp/src/manager/snmpm_mpd.erl6
-rw-r--r--lib/snmp/src/manager/snmpm_net_if_mt.erl1259
-rw-r--r--lib/snmp/src/misc/snmp_conf.erl17
-rw-r--r--lib/snmp/src/misc/snmp_config.erl93
-rw-r--r--lib/snmp/src/misc/snmp_log.erl110
-rw-r--r--lib/snmp/src/misc/snmp_verbosity.erl6
-rw-r--r--lib/snmp/test/Makefile3
-rw-r--r--lib/snmp/test/exp/.gitignore0
-rw-r--r--lib/snmp/test/exp/snmp_agent_bl_test.erl (renamed from lib/snmp/test/snmp_agent_bl_test.erl)0
-rw-r--r--lib/snmp/test/exp/snmp_agent_ms_test.erl (renamed from lib/snmp/test/snmp_agent_ms_test.erl)0
-rw-r--r--lib/snmp/test/exp/snmp_agent_mt_test.erl (renamed from lib/snmp/test/snmp_agent_mt_test.erl)0
-rw-r--r--lib/snmp/test/exp/snmp_agent_v1_test.erl (renamed from lib/snmp/test/snmp_agent_v1_test.erl)0
-rw-r--r--lib/snmp/test/exp/snmp_agent_v2_test.erl (renamed from lib/snmp/test/snmp_agent_v2_test.erl)0
-rw-r--r--lib/snmp/test/exp/snmp_agent_v3_test.erl (renamed from lib/snmp/test/snmp_agent_v3_test.erl)0
-rw-r--r--lib/snmp/test/modules.mk3
-rw-r--r--lib/snmp/test/snmp_SUITE.erl47
-rw-r--r--lib/snmp/test/snmp_agent_test.erl461
-rw-r--r--lib/snmp/test/snmp_agent_test_lib.erl211
-rw-r--r--lib/snmp/test/snmp_app_test.erl41
-rw-r--r--lib/snmp/test/snmp_compiler_test.erl109
-rw-r--r--lib/snmp/test/snmp_log_test.erl27
-rw-r--r--lib/snmp/test/snmp_manager_test.erl294
-rw-r--r--lib/snmp/test/snmp_test_data/Test3.mib123
-rw-r--r--lib/snmp/test/snmp_test_lib.erl99
-rw-r--r--lib/snmp/test/test-mibs/RMON-MIB.mib7782
-rw-r--r--lib/snmp/vsn.mk2
56 files changed, 7216 insertions, 4655 deletions
diff --git a/lib/snmp/doc/src/notes.xml b/lib/snmp/doc/src/notes.xml
index 704ff0a20f..2d045faa0f 100644
--- a/lib/snmp/doc/src/notes.xml
+++ b/lib/snmp/doc/src/notes.xml
@@ -34,6 +34,88 @@
<section>
+ <title>SNMP Development Toolkit 4.22</title>
+ <p>Version 4.22 supports code replacement in runtime from/to
+ version 4.21.7 4.21.6 4.21.5, 4.21.4, 4.21.3, 4.21.2, 4.21.1 and 4.21. </p>
+
+ <section>
+ <title>Improvements and new features</title>
+<!--
+ <p>-</p>
+-->
+
+ <list type="bulleted">
+ <item>
+ <p>[compiler] The table information the MIB compiler provides with
+ augmented tables has been extended with <c>nbr_of_cols</c>,
+ <c>first_accessible</c> and <c>not_accessible</c>. </p>
+ <p>Own Id: OTP-9969</p>
+ </item>
+
+ <item>
+ <p>Added the <c>log_to_io</c> audit-trail-log converter function
+ to the api modules of both the
+ <seealso marker="snmpm#log_to_io">manager</seealso>
+ and
+ <seealso marker="snmpa#log_to_io">agent</seealso>. </p>
+ <p>Own Id: OTP-9940</p>
+ </item>
+
+ <item>
+ <p>[manager] Introduced a new transport module,
+ <c>snmpm_net_if_mt</c>,
+ which handles all incomming and outgoing
+ traffic in newly created processes. The message/request is
+ processed and then the process exits. </p>
+ <p>Own Id: OTP-9876</p>
+ </item>
+
+ <item>
+ <p>[agent] Documenting previously existing but undocumented function,
+ <seealso marker="snmp_generic#get_table_info">snmp_generic:get_table_info/2</seealso>. </p>
+ <p>Own Id: OTP-9942</p>
+ </item>
+
+ <item>
+ <p>[agent] Improve error handling while reading agent config files.
+ Some files contain mandatory information and is therefor themself
+ mandatory. </p>
+ <p>Own Id: OTP-9943</p>
+ </item>
+ </list>
+
+ </section>
+
+ <section>
+ <title>Fixed Bugs and Malfunctions</title>
+ <p>-</p>
+
+ <!--
+ <list type="bulleted">
+ <item>
+ <p>[agent] Simultaneous
+ <seealso marker="snmpa#backup">snmpa:backup/1,2</seealso>
+ calls can interfere.
+ The master agent did not check if a backup was already in
+ progress when a backup request was accepted. </p>
+ <p>Own Id: OTP-9884</p>
+ <p>Aux Id: Seq 11995</p>
+ </item>
+
+ </list>
+ -->
+
+ </section>
+
+ <section>
+ <title>Incompatibilities</title>
+ <p>-</p>
+ </section>
+
+ </section> <!-- 4.22 -->
+
+
+ <section>
<title>SNMP Development Toolkit 4.21.7</title>
<p>Version 4.21.7 supports code replacement in runtime from/to
version 4.21.6, 4.21.5, 4.21.4, 4.21.3, 4.21.2, 4.21.1, 4.21, 4.20.1 and
@@ -47,14 +129,14 @@
<list type="bulleted">
<item>
<p>[agent] DoS attack using GET-BULK with large value of
- MaxRepetitions.
- A preventive method has been implementing by simply
- limit the number of varbinds that can be included in
- a Get-BULK response message. This is specified by the
- new config option,
- <seealso marker="snmp_app#agent_gb_max_vbs">gb_max_vbs</seealso>.
- </p>
- <p>Own Id: OTP-9700</p>
+ MaxRepetitions.
+ A preventive method has been implementing by simply
+ limit the number of varbinds that can be included in
+ a Get-BULK response message. This is specified by the
+ new config option,
+ <seealso marker="snmp_app#agent_gb_max_vbs">gb_max_vbs</seealso>.
+ </p>
+ <p>Own Id: OTP-9700</p>
</item>
</list>
@@ -63,7 +145,7 @@
</section>
<section>
- <title>Reported Fixed Bugs and Malfunctions</title>
+ <title>Fixed Bugs and Malfunctions</title>
<!--
<p>-</p>
-->
@@ -71,10 +153,10 @@
<list type="bulleted">
<item>
<p>[agent] Simultaneous
- <seealso marker="snmpa#backup">snmpa:backup/1,2</seealso>
- calls can interfere.
- The master agent did not check if a backup was already in
- progress when a backup request was accepted. </p>
+ <seealso marker="snmpa#backup">snmpa:backup/1,2</seealso>
+ calls can interfere.
+ The master agent did not check if a backup was already in
+ progress when a backup request was accepted. </p>
<p>Own Id: OTP-9884</p>
<p>Aux Id: Seq 11995</p>
</item>
@@ -106,14 +188,14 @@
<list type="bulleted">
<item>
<p>[agent] DoS attack using GET-BULK with large value of
- MaxRepetitions.
- A preventive method has been implementing by simply
- limit the number of varbinds that can be included in
- a Get-BULK response message. This is specified by the
- new config option,
- <seealso marker="snmp_app#agent_gb_max_vbs">gb_max_vbs</seealso>.
- </p>
- <p>Own Id: OTP-9700</p>
+ MaxRepetitions.
+ A preventive method has been implementing by simply
+ limit the number of varbinds that can be included in
+ a Get-BULK response message. This is specified by the
+ new config option,
+ <seealso marker="snmp_app#agent_gb_max_vbs">gb_max_vbs</seealso>.
+ </p>
+ <p>Own Id: OTP-9700</p>
</item>
</list>
@@ -121,7 +203,7 @@
</section>
<section>
- <title>Reported Fixed Bugs and Malfunctions</title>
+ <title>Fixed Bugs and Malfunctions</title>
<!--
<p>-</p>
-->
@@ -129,12 +211,12 @@
<list type="bulleted">
<item>
<p>[agent] Mib server cache gclimit update function incorrectly calls
- age update function.
- The gclimit update function,
- <seealso marker="snmpa#update_mibs_cache_gclimit">update_mibs_cache_gclimit/1</seealso>,
- <em>incorrectly</em> called the age update function,
- <seealso marker="snmpa#update_mibs_cache_age">update_mibs_cache_age/2</seealso>. </p>
- <p>Johan Claesson</p>
+ age update function.
+ The gclimit update function,
+ <seealso marker="snmpa#update_mibs_cache_gclimit">update_mibs_cache_gclimit/1</seealso>,
+ <em>incorrectly</em> called the age update function,
+ <seealso marker="snmpa#update_mibs_cache_age">update_mibs_cache_age/2</seealso>. </p>
+ <p>Johan Claesson</p>
<p>Own Id: OTP-9868</p>
</item>
diff --git a/lib/snmp/doc/src/snmp.xml b/lib/snmp/doc/src/snmp.xml
index af0833f005..3e6610891f 100644
--- a/lib/snmp/doc/src/snmp.xml
+++ b/lib/snmp/doc/src/snmp.xml
@@ -1,10 +1,10 @@
-<?xml version="1.0" encoding="latin1" ?>
+<?xml version="1.0" encoding="iso-8859-1" ?>
<!DOCTYPE erlref SYSTEM "erlref.dtd">
<erlref>
<header>
<copyright>
- <year>1996</year><year>2009</year>
+ <year>1996</year><year>2012</year>
<holder>Ericsson AB. All Rights Reserved.</holder>
</copyright>
<legalnotice>
@@ -391,6 +391,30 @@
version of the protocol data unit. There is a new line
between <c>Vsn</c> and <c>PDU</c>.</p>
+ <marker id="log_to_io"></marker>
+ </desc>
+ </func>
+
+ <func>
+ <name>log_to_io(LogDir, Mibs, LogName, LogFile) -> ok | {error, Reason}</name>
+ <name>log_to_io(LogDir, Mibs, LogName, LogFile, Start) -> ok | {error, Reason}</name>
+ <name>log_to_io(LogDir, Mibs, LogName, LogFile, Start, Stop) -> ok | {error, Reason}</name>
+ <fsummary>Convert an Audit Trail Log to text format</fsummary>
+ <type>
+ <v>LogDir = string()</v>
+ <v>Mibs = [MibName]</v>
+ <v>MibName = string()</v>
+ <v>LogName = string()</v>
+ <v>LogFile = string()</v>
+ <v>Start = Stop = null | datetime() | {local_time,datetime()} | {universal_time,datetime()} </v>
+ <v>Reason = term()</v>
+ </type>
+ <desc>
+ <p>Converts an Audit Trail Log to a readable format and
+ prints it on stdio. See
+ <seealso marker="snmp#log_to_txt">log_to_txt</seealso>
+ above for more info.</p>
+
<marker id="change_log_size"></marker>
</desc>
</func>
diff --git a/lib/snmp/doc/src/snmp_app.xml b/lib/snmp/doc/src/snmp_app.xml
index f6abe783b3..d11eaa2771 100644
--- a/lib/snmp/doc/src/snmp_app.xml
+++ b/lib/snmp/doc/src/snmp_app.xml
@@ -35,8 +35,8 @@
<appsummary>The SNMP Application</appsummary>
<description>
<p>This chapter describes the <c>snmp</c>
- application in OTP. The SNMP application provides the following
- services:</p>
+ application in OTP. The SNMP application provides the following
+ services:</p>
<list type="bulleted">
<item>
<p>a multilingual extensible SNMP agent</p>
@@ -589,16 +589,16 @@
{no_reuse, no_reuse()} |
{filter, manager_net_if_filter_options()} </c></p>
<p>These options are actually specific to the used module.
- The ones shown here are applicable to the default
- <c>manager_net_if_module()</c>.</p>
+ The ones shown here are applicable to the default
+ <c>manager_net_if_module()</c>.</p>
<p>For defaults see the options in <c>manager_net_if_option()</c>.</p>
</item>
<marker id="manager_ni_module"></marker>
<tag><c><![CDATA[manager_net_if_module() = atom() <optional>]]></c></tag>
<item>
- <p>Module which handles the network interface part for the
- SNMP manager. Must implement the
+ <p>The module which handles the network interface part for the
+ SNMP manager. It must implement the
<seealso marker="snmpm_network_interface">snmpm_network_interface</seealso> behaviour.</p>
<p>Default is <c>snmpm_net_if</c>.</p>
</item>
diff --git a/lib/snmp/doc/src/snmp_config.xml b/lib/snmp/doc/src/snmp_config.xml
index 0a49b7a62e..b756f3da7d 100644
--- a/lib/snmp/doc/src/snmp_config.xml
+++ b/lib/snmp/doc/src/snmp_config.xml
@@ -586,18 +586,18 @@
{no_reuse, no_reuse()} |
{filter, manager_net_if_filter_options()}</c></p>
<p>These options are actually specific to the used module.
- The ones shown here are applicable to the default
- <c>manager_net_if_module()</c>.</p>
+ The ones shown here are applicable to the default
+ <c>manager_net_if_module()</c>. </p>
<p>For defaults see the options in <c>manager_net_if_option()</c>.</p>
</item>
<marker id="manager_ni_module"></marker>
<tag><c><![CDATA[manager_net_if_module() = atom() <optional>]]></c></tag>
<item>
- <p>Module which handles the network interface part for the
- SNMP manager. Must implement the
- <seealso marker="snmpm_network_interface">snmpm_network_interface</seealso> behaviour.</p>
- <p>Default is <c>snmpm_net_if</c>.</p>
+ <p>The module which handles the network interface part for the
+ SNMP manager. It must implement the
+ <seealso marker="snmpm_network_interface">snmpm_network_interface</seealso> behaviour. </p>
+ <p>Default is <c>snmpm_net_if</c>. </p>
</item>
<marker id="manager_ni_filter_opts"></marker>
diff --git a/lib/snmp/doc/src/snmp_generic.xml b/lib/snmp/doc/src/snmp_generic.xml
index 77f3cefaa2..79a22323d9 100644
--- a/lib/snmp/doc/src/snmp_generic.xml
+++ b/lib/snmp/doc/src/snmp_generic.xml
@@ -1,10 +1,10 @@
-<?xml version="1.0" encoding="latin1" ?>
+<?xml version="1.0" encoding="iso-8859-1" ?>
<!DOCTYPE erlref SYSTEM "erlref.dtd">
<erlref>
<header>
<copyright>
- <year>1996</year><year>2009</year>
+ <year>1996</year><year>2012</year>
<holder>Ericsson AB. All Rights Reserved.</holder>
</copyright>
<legalnotice>
@@ -34,15 +34,16 @@
<module>snmp_generic</module>
<modulesummary>Generic Functions for Implementing SNMP Objects in a Database</modulesummary>
<description>
- <p>The module <c>snmp_generic</c> contains generic functions for implementing tables
- (and variables) using the SNMP built-in database or Mnesia. These
- default functions are used if no instrumentation function is
- provided for a managed object in a MIB. Sometimes, it might be
- necessary to customize the behaviour of the default functions. For
- example, in some situations a trap should be sent if a row is
- deleted or modified, or some hardware is to be informed, when
- information is changed.
- </p>
+ <marker id="description"></marker>
+ <p>The module <c>snmp_generic</c> contains generic functions for
+ implementing tables (and variables) using the SNMP built-in database
+ or Mnesia. These default functions are used if no instrumentation
+ function is provided for a managed object in a MIB. Sometimes,
+ it might be necessary to customize the behaviour of the default
+ functions. For example, in some situations a trap should be sent
+ if a row is deleted or modified, or some hardware is to be informed,
+ when information is changed. </p>
+
<p>The overall structure is shown in the following figure:</p>
<pre>
+---------------+
@@ -93,6 +94,7 @@
</description>
<section>
+ <marker id="data_types"></marker>
<title>DATA TYPES</title>
<p>In the functions defined below, the following types are used:</p>
<code type="none">
@@ -118,7 +120,10 @@ value() = term()
case of a <c>set</c> operation. </p>
</item>
</taglist>
+
+ <marker id="get_status_col2"></marker>
</section>
+
<funcs>
<func>
<name>get_status_col(Name, Cols)</name>
@@ -136,8 +141,11 @@ value() = term()
<p>This function can be used in instrumentation functions for
<c>is_set_ok</c>, <c>undo</c> or <c>set</c> to check if the
status column of a table is modified.</p>
+
+ <marker id="get_index_types"></marker>
</desc>
</func>
+
<func>
<name>get_index_types(Name)</name>
<fsummary>Get the index types of <c>Name</c></fsummary>
@@ -147,9 +155,36 @@ value() = term()
<desc>
<p>Gets the index types of <c>Name</c></p>
<p>This function can be used in instrumentation functions to
- retrieve the index types part of the table info.</p>
+ retrieve the index types part of the table info.</p>
+
+ <marker id="get_table_info"></marker>
</desc>
</func>
+
+ <func>
+ <name>get_table_info(Name, Item) -> table_info_result()</name>
+ <fsummary>Get table info item of MIB table <c>Name</c></fsummary>
+ <type>
+ <v>Name = name()</v>
+ <v>Item = table_item() | all</v>
+ <v>table_item() = nbr_of_cols | defvals | status_col | not_accessible |
+ index_types | first_accessible | first_own_index</v>
+ <v>table_info_result() = Value | [{table_item(), Value}]</v>
+ <v>Value = term()</v>
+ </type>
+ <desc>
+ <p>Get a specific table info item or, if <c>Item</c> has the
+ value <c>all</c>, a two tuple list (property list) is instead
+ returned with all the items and their respctive values of the
+ given table. </p>
+
+ <p>This function can be used in instrumentation functions to
+ retrieve a given part of the table info.</p>
+
+ <marker id="table_func"></marker>
+ </desc>
+ </func>
+
<func>
<name>table_func(Op1, NameDb)</name>
<name>table_func(Op2, RowIndex, Cols, NameDb) -> Ret</name>
@@ -190,8 +225,11 @@ value() = term()
<p>The function returns according to the specification of an
instrumentation function.
</p>
+
+ <marker id="table_get_elements"></marker>
</desc>
</func>
+
<func>
<name>table_get_elements(NameDb, RowIndex, Cols) -> Values</name>
<fsummary>Get elements in a table row</fsummary>
@@ -204,8 +242,11 @@ value() = term()
<desc>
<p>Returns a list with values for all columns in <c>Cols</c>.
If a column is undefined, its value is <c>noinit</c>.</p>
+
+ <marker id="table_next"></marker>
</desc>
</func>
+
<func>
<name>table_next(NameDb, RestOid) -> RowIndex | endOfTable</name>
<fsummary>Find the next row in the table</fsummary>
@@ -217,8 +258,11 @@ value() = term()
<desc>
<p>Finds the indices of the next row in the table. <c>RestOid</c>
does not have to specify an existing row.</p>
+
+ <marker id="table_row_exists"></marker>
</desc>
</func>
+
<func>
<name>table_row_exists(NameDb, RowIndex) -> bool()</name>
<fsummary>Check if a row in a table exists</fsummary>
@@ -228,8 +272,11 @@ value() = term()
</type>
<desc>
<p>Checks if a row in a table exists.</p>
+
+ <marker id="table_set_elements"></marker>
</desc>
</func>
+
<func>
<name>table_set_elements(NameDb, RowIndex, Cols) -> bool()</name>
<fsummary>Set elements in a table row</fsummary>
@@ -246,8 +293,11 @@ value() = term()
<c>mnesia:write</c> to store the values. This means that
this function must be called from within a transaction
(<c>mnesia:transaction/1</c> or <c>mnesia:dirty/1</c>).</p>
+
+ <marker id="variable_func"></marker>
</desc>
</func>
+
<func>
<name>variable_func(Op1, NameDb)</name>
<name>variable_func(Op2, Val, NameDb) -> Ret</name>
@@ -268,8 +318,11 @@ value() = term()
the database. </p>
<p>The function returns according to the specification of an
instrumentation function. </p>
+
+ <marker id="variable_get"></marker>
</desc>
</func>
+
<func>
<name>variable_get(NameDb) -> {value, Value} | undefined</name>
<fsummary>Get the value of a variable</fsummary>
@@ -279,8 +332,11 @@ value() = term()
</type>
<desc>
<p>Gets the value of a variable.</p>
+
+ <marker id="variable_set"></marker>
</desc>
</func>
+
<func>
<name>variable_set(NameDb, NewVal) -> true | false</name>
<fsummary>Set a value for a variable</fsummary>
@@ -299,6 +355,7 @@ value() = term()
</funcs>
<section>
+ <marker id="example"></marker>
<title>Example</title>
<p>The following example shows an implementation of a table which is
stored in Mnesia, but with some checks performed at set-request
diff --git a/lib/snmp/doc/src/snmp_manager_netif.xml b/lib/snmp/doc/src/snmp_manager_netif.xml
index 2738ca76c1..169e20d10b 100644
--- a/lib/snmp/doc/src/snmp_manager_netif.xml
+++ b/lib/snmp/doc/src/snmp_manager_netif.xml
@@ -1,10 +1,10 @@
-<?xml version="1.0" encoding="latin1" ?>
+<?xml version="1.0" encoding="iso-8859-1" ?>
<!DOCTYPE chapter SYSTEM "chapter.dtd">
<chapter>
<header>
<copyright>
- <year>2004</year><year>2009</year>
+ <year>2004</year><year>2012</year>
<holder>Ericsson AB. All Rights Reserved.</holder>
</copyright>
<legalnotice>
@@ -35,31 +35,34 @@
<image file="snmp_manager_netif_1.gif">
<icaption>The Purpose of Manager Net if</icaption>
</image>
+
<p>The Network Interface (Net if) process delivers SNMP PDUs to the
- manager server, and receives SNMP PDUs from the manager server.
- The most common behaviour of a Net if process is that is receives
- request PDU from the manager server, encodes the PDU into bytes
- and transmits the bytes onto the network to an agent. When the
- reply from the agent is received by the Net if process, which it
- decodes into an SNMP PDU, which it sends to the manager server.
- </p>
+ manager server, and receives SNMP PDUs from the manager server.
+ The most common behaviour of a Net if process is that is receives
+ request PDU from the manager server, encodes the PDU into bytes
+ and transmits the bytes onto the network to an agent. When the
+ reply from the agent is received by the Net if process, which it
+ decodes into an SNMP PDU, which it sends to the manager server. </p>
+
<p>However, that simple behaviour can be modified in numerous
- ways. For example, the Net if process can apply some kind of
- encrypting/decrypting scheme on the bytes.
- </p>
- <p>It is also possible to write your own Net if process. The default
- Net if process is implemented in the module <c>snmpm_net_if</c> and
- it uses UDP as the transport protocol.
- </p>
- <p>This section describes how to write a Net if process.
- </p>
+ ways. For example, the Net if process can apply some kind of
+ encrypting/decrypting scheme on the bytes. </p>
+
+ <p>The snmp application provides two different modules,
+ <c>snmpm_net_if</c> (the default) and <c>snmpm_net_if_mt</c>,
+ both uses the UDP as the transport protocol. The difference
+ between the two modules is that the latter is "multi-threaded",
+ i.e. for each message/request a new process is created that
+ process the message/request and then exits. </p>
+
+ <p>It is also possible to write your own Net if process,
+ this section describes how to write a Net if processdo that.</p>
<section>
<marker id="mandatory_functions"></marker>
<title>Mandatory Functions</title>
<p>A Net if process must implement the SNMP manager
- <seealso marker="snmpm_network_interface">network interface behaviour</seealso>.
- </p>
+ <seealso marker="snmpm_network_interface">network interface behaviour</seealso>. </p>
</section>
<section>
diff --git a/lib/snmp/doc/src/snmpa.xml b/lib/snmp/doc/src/snmpa.xml
index 2322af28cc..86fde03205 100644
--- a/lib/snmp/doc/src/snmpa.xml
+++ b/lib/snmp/doc/src/snmpa.xml
@@ -501,6 +501,7 @@ notification_delivery_info() = #snmpa_notification_delivery_info{}
</func>
<func>
+ <name>log_to_txt(LogDir)</name>
<name>log_to_txt(LogDir, Mibs)</name>
<name>log_to_txt(LogDir, Mibs, OutFile) -> ok | {error, Reason}</name>
<name>log_to_txt(LogDir, Mibs, OutFile, LogName) -> ok | {error, Reason}</name>
@@ -528,6 +529,37 @@ notification_delivery_info() = #snmpa_notification_delivery_info{}
See <seealso marker="snmp#log_to_txt">snmp:log_to_txt</seealso>
for more info.</p>
+ <marker id="log_to_io"></marker>
+ </desc>
+ </func>
+
+ <func>
+ <name>log_to_io(LogDir) -> ok | {error, Reason}</name>
+ <name>log_to_io(LogDir, Mibs) -> ok | {error, Reason}</name>
+ <name>log_to_io(LogDir, Mibs, LogName) -> ok | {error, Reason}</name>
+ <name>log_to_io(LogDir, Mibs, LogName, LogFile) -> ok | {error, Reason}</name>
+ <name>log_to_io(LogDir, Mibs, LogName, LogFile, Start) -> ok | {error, Reason}</name>
+ <name>log_to_io(LogDir, Mibs, LogName, LogFile, Start, Stop) -> ok | {error, Reason}</name>
+ <fsummary>Convert an Audit Trail Log to text format</fsummary>
+ <type>
+ <v>LogDir = string()</v>
+ <v>Mibs = [MibName]</v>
+ <v>MibName = string()</v>
+ <v>LogName = string()</v>
+ <v>LogFile = string()</v>
+ <v>Start = Stop = null | datetime() | {local_time,datetime()} | {universal_time,datetime()} </v>
+ <v>Reason = disk_log_open_error() | file_open_error() | term()</v>
+ <v>disk_log_open_error() = {LogName, term()}</v>
+ <v>file_open_error() = {OutFile, term()}</v>
+ </type>
+ <desc>
+ <p>Converts an Audit Trail Log to a readable format and
+ prints it on stdio.
+ <c>LogName</c> defaults to "snmpa_log".
+ <c>LogFile</c> defaults to "snmpa.log".
+ See <seealso marker="snmp#log_to_io">snmp:log_to_io</seealso>
+ for more info.</p>
+
<marker id="change_log_size"></marker>
</desc>
</func>
diff --git a/lib/snmp/doc/src/snmpm.xml b/lib/snmp/doc/src/snmpm.xml
index c36a1b2a24..9bbb6cdbdb 100644
--- a/lib/snmp/doc/src/snmpm.xml
+++ b/lib/snmp/doc/src/snmpm.xml
@@ -4,7 +4,7 @@
<erlref>
<header>
<copyright>
- <year>2004</year><year>2011</year>
+ <year>2004</year><year>2012</year>
<holder>Ericsson AB. All Rights Reserved.</holder>
</copyright>
<legalnotice>
@@ -1237,6 +1237,38 @@ priv_key = [integer()] (length is 16 if priv = usmDESPrivProtocol | usmAesCfb1
See <seealso marker="snmp#log_to_txt">snmp:log_to_txt</seealso>
for more info.</p>
+ <marker id="log_to_io"></marker>
+ </desc>
+ </func>
+
+ <func>
+ <name>log_to_io(LogDir) -> ok | {error, Reason}</name>
+ <name>log_to_io(LogDir, Mibs) -> ok | {error, Reason}</name>
+ <name>log_to_io(LogDir, Mibs) -> ok | {error, Reason}</name>
+ <name>log_to_io(LogDir, Mibs, LogName) -> ok | {error, Reason}</name>
+ <name>log_to_io(LogDir, Mibs, LogName, LogFile) -> ok | {error, Reason}</name>
+ <name>log_to_io(LogDir, Mibs, LogName, LogFile, Start) -> ok | {error, Reason}</name>
+ <name>log_to_io(LogDir, Mibs, LogName, LogFile, Start, Stop) -> ok | {error, Reason}</name>
+ <fsummary>Convert an Audit Trail Log to text format</fsummary>
+ <type>
+ <v>LogDir = string()</v>
+ <v>Mibs = [MibName]</v>
+ <v>MibName = string()</v>
+ <v>LogName = string()</v>
+ <v>LogFile = string()</v>
+ <v>Start = Stop = null | datetime() | {local_time,datetime()} | {universal_time,datetime()} </v>
+ <v>Reason = disk_log_open_error() | file_open_error() | term()</v>
+ <v>disk_log_open_error() = {LogName, term()}</v>
+ <v>file_open_error() = {OutFile, term()}</v>
+ </type>
+ <desc>
+ <p>Converts an Audit Trail Log to a readable format and
+ prints it on stdio.
+ <c>LogName</c> defaults to "snmpm_log".
+ <c>LogFile</c> defaults to "snmpm.log".
+ See <seealso marker="snmp#log_to_io">snmp:log_to_io</seealso>
+ for more info.</p>
+
<marker id="change_log_size"></marker>
</desc>
</func>
diff --git a/lib/snmp/doc/src/snmpm_network_interface_filter.xml b/lib/snmp/doc/src/snmpm_network_interface_filter.xml
index ea1e183848..5f80cec94e 100644
--- a/lib/snmp/doc/src/snmpm_network_interface_filter.xml
+++ b/lib/snmp/doc/src/snmpm_network_interface_filter.xml
@@ -1,10 +1,10 @@
-<?xml version="1.0" encoding="latin1" ?>
+<?xml version="1.0" encoding="iso-8859-1" ?>
<!DOCTYPE erlref SYSTEM "erlref.dtd">
<erlref>
<header>
<copyright>
- <year>2007</year><year>2009</year>
+ <year>2007</year><year>2012</year>
<holder>Ericsson AB. All Rights Reserved.</holder>
</copyright>
<legalnotice>
@@ -72,9 +72,10 @@
</list>
<p>Note that the network interface filter is something which is used
by the network interface implementation provided by the application
- (<c>snmpm_net_if</c>). The default filter accepts all messages.</p>
+ (<c>snmpm_net_if</c> and <c>snmpm_net_if_mt</c>).
+ The default filter accepts all messages.</p>
<p>A network interface filter can e.g. be used during testing or for load
- regulation. </p>
+ regulation. </p>
</description>
<section>
diff --git a/lib/snmp/examples/ex2/snmp_ex2_manager.erl b/lib/snmp/examples/ex2/snmp_ex2_manager.erl
index ff873327bc..1b247d713d 100644
--- a/lib/snmp/examples/ex2/snmp_ex2_manager.erl
+++ b/lib/snmp/examples/ex2/snmp_ex2_manager.erl
@@ -1,7 +1,7 @@
%%
%% %CopyrightBegin%
%%
-%% Copyright Ericsson AB 2006-2010. All Rights Reserved.
+%% Copyright Ericsson AB 2006-2012. All Rights Reserved.
%%
%% The contents of this file are subject to the Erlang Public License,
%% Version 1.1, (the "License"); you may not use this file except in
@@ -39,7 +39,7 @@
%% Manager callback API:
-export([handle_error/3,
- handle_agent/4,
+ handle_agent/5,
handle_pdu/4,
handle_trap/3,
handle_inform/3,
@@ -265,16 +265,17 @@ handle_snmp_callback(handle_error, {ReqId, Reason}) ->
"~n Reason: ~p"
"~n", [ReqId, Reason]),
ok;
-handle_snmp_callback(handle_agent, {Addr, Port, SnmpInfo}) ->
+handle_snmp_callback(handle_agent, {Addr, Port, Type, SnmpInfo}) ->
{ES, EI, VBs} = SnmpInfo,
io:format("*** UNKNOWN AGENT ***"
"~n Address: ~p"
"~n Port: ~p"
+ "~n Type: ~p"
"~n SNMP Info: "
"~n Error Status: ~w"
"~n Error Index: ~w"
"~n Varbinds: ~p"
- "~n", [Addr, Port, ES, EI, VBs]),
+ "~n", [Addr, Port, Type, ES, EI, VBs]),
ok;
handle_snmp_callback(handle_pdu, {TargetName, ReqId, SnmpResponse}) ->
{ES, EI, VBs} = SnmpResponse,
@@ -382,8 +383,8 @@ handle_error(ReqId, Reason, Server) when is_pid(Server) ->
ignore.
-handle_agent(Addr, Port, SnmpInfo, Server) when is_pid(Server) ->
- report_callback(Server, handle_agent, {Addr, Port, SnmpInfo}),
+handle_agent(Addr, Port, Type, SnmpInfo, Server) when is_pid(Server) ->
+ report_callback(Server, handle_agent, {Addr, Port, Type, SnmpInfo}),
ignore.
diff --git a/lib/snmp/include/snmp_types.hrl b/lib/snmp/include/snmp_types.hrl
index 4adb24361c..fce087347f 100644
--- a/lib/snmp/include/snmp_types.hrl
+++ b/lib/snmp/include/snmp_types.hrl
@@ -78,23 +78,36 @@
%%-----------------------------------------------------------------
%% TableInfo - stored in snmp_symbolic_store for use by the
-%% generic table functions.
+%% generic table functions. For an ordinary table, the
+%% types will be the following:
%% nbr_of_cols is an integer
+%% pos_integer()
%% defvals is a list of {Col, Defval}, ordered by column
%% number
+%% [{Col :: integer(), Defval :: term()}]
%% status_col is an integer
+%% pos_integer()
%% not_accessible a sorted list of columns (> first_accessible)
%% that are 'not-accessible'
-%% indextypes is a list of #asn1_type for the index-columns,
-%% ordered by column number
-%% first_accessible is an integer, the first non-accessible
-%% column
+%% [pos_integer()]
+%% index_types is a list of #asn1_type for the index-columns,
+%% ordered by column number or an "augment"-tuple
+%% [asn1_type()]
+%% first_accessible is an integer, the first accessible column
+%% pos_integer()
%% first_own_index is an integer. 0 if there is no such index for
%% this table.
%% This is not the same as the last integer in the oid!
%% Example: If a table has one own index (oid.1), one
%% column (oid.2) and one imported index then
%% first_own_index will be 2.
+%% non_neg_integer()
+%% For a augmented table, it will instead look like this:
+%% index_types {augments, {atom(), asn1_type()}}
+%% nbr_of_cols pos_integer()
+%% not_accessible [pos_integer()]
+%% first_accessible pos_integer()
+%%
%%-----------------------------------------------------------------
-record(table_info,
@@ -192,7 +205,7 @@
%%----------------------------------------------------------------------
-record(mib,
{misc = [],
- mib_format_version = "3.2",
+ mib_format_version = "3.3",
name = "",
module_identity, %% Not in SMIv1, and only with +module_identity
mes = [],
diff --git a/lib/snmp/src/agent/snmp_community_mib.erl b/lib/snmp/src/agent/snmp_community_mib.erl
index 77307aa7ad..d7d41aca31 100644
--- a/lib/snmp/src/agent/snmp_community_mib.erl
+++ b/lib/snmp/src/agent/snmp_community_mib.erl
@@ -28,6 +28,7 @@
-export([add_community/5, add_community/6, delete_community/1]).
-export([check_community/1]).
+-include("snmpa_internal.hrl").
-include("SNMP-COMMUNITY-MIB.hrl").
-include("SNMP-TARGET-MIB.hrl").
-include("SNMPv2-TC.hrl").
@@ -120,10 +121,17 @@ init_tabs(Comms) ->
read_community_config_files(Dir) ->
?vdebug("read community config file",[]),
- Gen = fun(_) -> ok end,
- Filter = fun(Comms) -> Comms end,
- Check = fun(Entry) -> check_community(Entry) end,
- [Comms] =
+ FileName = "community.conf",
+ Gen = fun(D, Reason) ->
+ warning_msg("failed reading config file ~s"
+ "~n Config Dir: ~s"
+ "~n Reason: ~p",
+ [FileName, D, Reason]),
+ ok
+ end,
+ Filter = fun(Comms) -> Comms end,
+ Check = fun(Entry) -> check_community(Entry) end,
+ [Comms] =
snmp_conf:read_files(Dir, [{Gen, Filter, Check, "community.conf"}]),
Comms.
@@ -601,5 +609,8 @@ set_sname(_) -> %% Keep it, if already set.
error(Reason) ->
throw({error, Reason}).
+warning_msg(F, A) ->
+ ?snmpa_warning("[COMMUNITY-MIB]: " ++ F, A).
+
config_err(F, A) ->
snmpa_error:config_err("[COMMUNITY-MIB]: " ++ F, A).
diff --git a/lib/snmp/src/agent/snmp_framework_mib.erl b/lib/snmp/src/agent/snmp_framework_mib.erl
index 0d7866d94d..cc191bd956 100644
--- a/lib/snmp/src/agent/snmp_framework_mib.erl
+++ b/lib/snmp/src/agent/snmp_framework_mib.erl
@@ -1,7 +1,7 @@
%%
%% %CopyrightBegin%
%%
-%% Copyright Ericsson AB 1999-2010. All Rights Reserved.
+%% Copyright Ericsson AB 1999-2012. All Rights Reserved.
%%
%% The contents of this file are subject to the Erlang Public License,
%% Version 1.1, (the "License"); you may not use this file except in
@@ -115,7 +115,9 @@ do_configure(Dir) ->
read_internal_config_files(Dir) ->
?vdebug("read context config file",[]),
- Gen = fun(D) -> convert_context(D) end,
+ Gen = fun(D, Reason) ->
+ convert_context(D, Reason)
+ end,
Filter = fun(Contexts) -> Contexts end,
Check = fun(Entry) -> check_context(Entry) end,
[Ctxs] = snmp_conf:read_files(Dir, [{Gen, Filter, Check, "context.conf"}]),
@@ -123,10 +125,17 @@ read_internal_config_files(Dir) ->
read_agent(Dir) ->
- ?vdebug("read agent config file",[]),
- Check = fun(Entry) -> check_agent(Entry) end,
- File = filename:join(Dir, "agent.conf"),
- Agent = snmp_conf:read(File, Check),
+ ?vdebug("read agent config file", []),
+ FileName = "agent.conf",
+ Check = fun(Entry) -> check_agent(Entry) end,
+ File = filename:join(Dir, FileName),
+ Agent =
+ try
+ snmp_conf:read(File, Check)
+ catch
+ throw:{error, Reason} ->
+ error({failed_reading_config_file, Dir, FileName, Reason})
+ end,
sort_agent(Agent).
@@ -146,9 +155,9 @@ sort_agent(L) ->
%%-----------------------------------------------------------------
%% Generate a context.conf file.
%%-----------------------------------------------------------------
-convert_context(Dir) ->
+convert_context(Dir, _Reason) ->
config_err("missing context.conf file => generating a default file", []),
- File = filename:join(Dir,"context.conf"),
+ File = filename:join(Dir, "context.conf"),
case file:open(File, [write]) of
{ok, Fid} ->
ok = io:format(Fid, "~s\n", [context_header()]),
@@ -165,7 +174,7 @@ context_header() ->
io_lib:format("%% This file was automatically generated by "
"snmp_config v~s ~w-~2.2.0w-~2.2.0w "
"~2.2.0w:~2.2.0w:~2.2.0w\n",
- [?version,Y,Mo,D,H,Mi,S]).
+ [?version, Y, Mo, D, H, Mi, S]).
%%-----------------------------------------------------------------
diff --git a/lib/snmp/src/agent/snmp_notification_mib.erl b/lib/snmp/src/agent/snmp_notification_mib.erl
index 720ac749b8..37e09f5d3e 100644
--- a/lib/snmp/src/agent/snmp_notification_mib.erl
+++ b/lib/snmp/src/agent/snmp_notification_mib.erl
@@ -1,7 +1,7 @@
%%
%% %CopyrightBegin%
%%
-%% Copyright Ericsson AB 1998-2011. All Rights Reserved.
+%% Copyright Ericsson AB 1998-2012. All Rights Reserved.
%%
%% The contents of this file are subject to the Erlang Public License,
%% Version 1.1, (the "License"); you may not use this file except in
@@ -27,6 +27,7 @@
-export([add_notify/3, delete_notify/1]).
-export([check_notify/1]).
+-include("snmpa_internal.hrl").
-include("SNMP-NOTIFICATION-MIB.hrl").
-include("SNMPv2-TC.hrl").
-include("snmp_tables.hrl").
@@ -104,7 +105,14 @@ do_reconfigure(Dir) ->
read_notify_config_files(Dir) ->
?vdebug("read notify config file",[]),
- Gen = fun(_) -> ok end,
+ FileName = "notify.conf",
+ Gen = fun(D, Reason) ->
+ info_msg("failed reading config file ~s"
+ "~n Config Dir: ~s"
+ "~n Reason: ~p",
+ [FileName, D, Reason]),
+ ok
+ end,
Filter = fun(Notifs) -> Notifs end,
Check = fun(Entry) -> check_notify(Entry) end,
[Notifs] =
@@ -112,7 +120,7 @@ read_notify_config_files(Dir) ->
Notifs.
check_notify({Name, Tag, Type}) ->
- snmp_conf:check_string(Name,{gt,0}),
+ snmp_conf:check_string(Name, {gt, 0}),
snmp_conf:check_string(Tag),
{ok, Val} = snmp_conf:check_atom(Type, [{trap, 1}, {inform, 2}]),
Notify = {Name, Tag, Val,
@@ -451,12 +459,15 @@ set_sname() ->
set_sname(get(sname)).
set_sname(undefined) ->
- put(sname,conf);
+ put(sname, conf);
set_sname(_) -> %% Keep it, if already set.
ok.
error(Reason) ->
throw({error, Reason}).
+info_msg(F, A) ->
+ ?snmpa_info("[NOTIFICATION-MIB]: " ++ F, A).
+
config_err(F, A) ->
snmpa_error:config_err("[NOTIFICATION-MIB]: " ++ F, A).
diff --git a/lib/snmp/src/agent/snmp_standard_mib.erl b/lib/snmp/src/agent/snmp_standard_mib.erl
index b6834d278c..ca93546923 100644
--- a/lib/snmp/src/agent/snmp_standard_mib.erl
+++ b/lib/snmp/src/agent/snmp_standard_mib.erl
@@ -143,20 +143,35 @@ do_reconfigure(Dir) ->
%% Func: read_standard/1
%% Args: Dir is the directory with trailing dir_separator where
%% the configuration files can be found.
-%% Purpose: Reads th standard configuration file.
+%% Purpose: Reads the standard configuration file.
%% Returns: A list of standard variables
%% Fails: If an error occurs, the process will die with Reason
%% configuration_error.
+%% This file is mandatory, as it contains mandatory
+%% config options for which there are no default values.
%%-----------------------------------------------------------------
read_standard(Dir) ->
?vdebug("check standard config file",[]),
- Gen = fun(_) -> ok end,
- Filter = fun(Standard) -> sort_standard(Standard) end,
- Check = fun(Entry) -> check_standard(Entry) end,
+ FileName = "standard.conf",
+ Gen = fun(D, Reason) ->
+ throw({error, {failed_reading_config_file,
+ D, FileName,
+ list_dir(Dir), Reason}})
+ end,
+ Filter = fun(Standard) -> sort_standard(Standard) end,
+ Check = fun(Entry) -> check_standard(Entry) end,
[Standard] =
- snmp_conf:read_files(Dir, [{Gen, Filter, Check, "standard.conf"}]),
+ snmp_conf:read_files(Dir, [{Gen, Filter, Check, FileName}]),
Standard.
+list_dir(Dir) ->
+ case file:list_dir(Dir) of
+ {ok, Files} ->
+ Files;
+ Error ->
+ Error
+ end.
+
%%-----------------------------------------------------------------
%% Make sure that each mandatory standard attribute is present, and
@@ -548,6 +563,7 @@ snmp_set_serial_no(set, NewVal) ->
snmp_generic:variable_func(set, (NewVal + 1) rem 2147483648,
{snmpSetSerialNo, volatile}).
+
%%-----------------------------------------------------------------
%% This is the instrumentation function for sysOrTable
%%-----------------------------------------------------------------
@@ -588,4 +604,4 @@ error(Reason) ->
throw({error, Reason}).
config_err(F, A) ->
- snmpa_error:config_err("[STANDARD-MIB]: " ++ F, A).
+ snmpa_error:config_err("[STANDARD-MIB] " ++ F, A).
diff --git a/lib/snmp/src/agent/snmp_target_mib.erl b/lib/snmp/src/agent/snmp_target_mib.erl
index a45db89c09..b01d536caa 100644
--- a/lib/snmp/src/agent/snmp_target_mib.erl
+++ b/lib/snmp/src/agent/snmp_target_mib.erl
@@ -1,7 +1,7 @@
%%
%% %CopyrightBegin%
%%
-%% Copyright Ericsson AB 1998-2011. All Rights Reserved.
+%% Copyright Ericsson AB 1998-2012. All Rights Reserved.
%%
%% The contents of this file are subject to the Erlang Public License,
%% Version 1.1, (the "License"); you may not use this file except in
@@ -132,12 +132,12 @@ do_reconfigure(Dir) ->
read_target_config_files(Dir) ->
- ?vdebug("check target address config file",[]),
- TAGen = fun(_D) -> ok end,
+ ?vdebug("check target address and parameter config file(s)",[]),
+ TAGen = fun(_D, _Reason) -> ok end,
TAFilter = fun(Addr) -> Addr end,
TACheck = fun(Entry) -> check_target_addr(Entry) end,
- TPGen = fun(_D) -> ok end,
+ TPGen = fun(_D, _Reason) -> ok end,
TPFilter = fun(Params) -> Params end,
TPCheck = fun(Entry) -> check_target_params(Entry) end,
diff --git a/lib/snmp/src/agent/snmp_user_based_sm_mib.erl b/lib/snmp/src/agent/snmp_user_based_sm_mib.erl
index 69cebc858b..2e801622e7 100644
--- a/lib/snmp/src/agent/snmp_user_based_sm_mib.erl
+++ b/lib/snmp/src/agent/snmp_user_based_sm_mib.erl
@@ -1,7 +1,7 @@
%%
%% %CopyrightBegin%
%%
-%% Copyright Ericsson AB 1999-2010. All Rights Reserved.
+%% Copyright Ericsson AB 1999-2012. All Rights Reserved.
%%
%% The contents of this file are subject to the Erlang Public License,
%% Version 1.1, (the "License"); you may not use this file except in
@@ -136,7 +136,7 @@ do_reconfigure(Dir) ->
read_usm_config_files(Dir) ->
?vdebug("read usm config file",[]),
- Gen = fun(D) -> generate_usm(D) end,
+ Gen = fun(D, Reason) -> generate_usm(D, Reason) end,
Filter = fun(Usms) -> Usms end,
Check = fun(Entry) -> check_usm(Entry) end,
[Usms] =
@@ -144,7 +144,7 @@ read_usm_config_files(Dir) ->
Usms.
-generate_usm(Dir) ->
+generate_usm(Dir, _Reason) ->
info_msg("Incomplete configuration. Generating empty usm.conf.", []),
USMFile = filename:join(Dir, "usm.conf"),
ok = file:write_file(USMFile, list_to_binary([])).
diff --git a/lib/snmp/src/agent/snmp_view_based_acm_mib.erl b/lib/snmp/src/agent/snmp_view_based_acm_mib.erl
index 2cee91b081..479a44795f 100644
--- a/lib/snmp/src/agent/snmp_view_based_acm_mib.erl
+++ b/lib/snmp/src/agent/snmp_view_based_acm_mib.erl
@@ -115,7 +115,7 @@ do_reconfigure(Dir) ->
read_vacm_config_files(Dir) ->
?vdebug("read vacm config file",[]),
- Gen = fun(_) -> ok end,
+ Gen = fun(_D, _Reason) -> ok end,
Filter = fun(Vacms) ->
Sec2Group = [X || {vacmSecurityToGroup, X} <- Vacms],
Access = [X || {vacmAccess, X} <- Vacms],
diff --git a/lib/snmp/src/agent/snmpa.erl b/lib/snmp/src/agent/snmpa.erl
index c400aaddf7..b45a47ec6b 100644
--- a/lib/snmp/src/agent/snmpa.erl
+++ b/lib/snmp/src/agent/snmpa.erl
@@ -83,8 +83,11 @@
-export([add_agent_caps/2, del_agent_caps/1, get_agent_caps/0]).
%% Audit Trail Log functions
--export([log_to_txt/2, log_to_txt/3, log_to_txt/4,
+-export([log_to_txt/1,
+ log_to_txt/2, log_to_txt/3, log_to_txt/4,
log_to_txt/5, log_to_txt/6, log_to_txt/7,
+ log_to_io/1, log_to_io/2, log_to_io/3,
+ log_to_io/4, log_to_io/5, log_to_io/6,
log_info/0,
change_log_size/1,
get_log_type/0, get_log_type/1,
@@ -780,6 +783,8 @@ get_agent_caps() ->
%%% Audit Trail Log functions
%%%-----------------------------------------------------------------
+log_to_txt(LogDir) ->
+ log_to_txt(LogDir, []).
log_to_txt(LogDir, Mibs) ->
OutFile = "snmpa_log.txt",
LogName = ?audit_trail_log_name,
@@ -800,6 +805,23 @@ log_to_txt(LogDir, Mibs, OutFile, LogName, LogFile, Start, Stop) ->
snmp:log_to_txt(LogDir, Mibs, OutFile, LogName, LogFile, Start, Stop).
+log_to_io(LogDir) ->
+ log_to_io(LogDir, []).
+log_to_io(LogDir, Mibs) ->
+ LogName = ?audit_trail_log_name,
+ LogFile = ?audit_trail_log_file,
+ snmp:log_to_io(LogDir, Mibs, LogName, LogFile).
+log_to_io(LogDir, Mibs, LogName) ->
+ LogFile = ?audit_trail_log_file,
+ snmp:log_to_io(LogDir, Mibs, LogName, LogFile).
+log_to_io(LogDir, Mibs, LogName, LogFile) ->
+ snmp:log_to_io(LogDir, Mibs, LogName, LogFile).
+log_to_io(LogDir, Mibs, LogName, LogFile, Start) ->
+ snmp:log_to_io(LogDir, Mibs, LogName, LogFile, Start).
+log_to_io(LogDir, Mibs, LogName, LogFile, Start, Stop) ->
+ snmp:log_to_io(LogDir, Mibs, LogName, LogFile, Start, Stop).
+
+
log_info() ->
LogName = ?audit_trail_log_name,
snmp_log:info(LogName).
diff --git a/lib/snmp/src/agent/snmpa_agent.erl b/lib/snmp/src/agent/snmpa_agent.erl
index 9cc986cf47..9d30e332f1 100644
--- a/lib/snmp/src/agent/snmpa_agent.erl
+++ b/lib/snmp/src/agent/snmpa_agent.erl
@@ -1281,7 +1281,7 @@ handle_call({backup, BackupDir}, From, #state{backup = undefined} = S) ->
?vtrace("backup server: ~p", [BackupServer]),
{noreply, S#state{backup = {BackupServer, From}}};
-handle_call({backup, _BackupDir}, From, #state{backup = Backup} = S) ->
+handle_call({backup, _BackupDir}, _From, #state{backup = Backup} = S) ->
?vinfo("backup already in progress: ~p", [Backup]),
{reply, {error, backup_in_progress}, S};
diff --git a/lib/snmp/src/agent/snmpa_local_db.erl b/lib/snmp/src/agent/snmpa_local_db.erl
index 1ec8dd3874..2c0cad807a 100644
--- a/lib/snmp/src/agent/snmpa_local_db.erl
+++ b/lib/snmp/src/agent/snmpa_local_db.erl
@@ -1,7 +1,7 @@
%%
%% %CopyrightBegin%
%%
-%% Copyright Ericsson AB 1996-2011. All Rights Reserved.
+%% Copyright Ericsson AB 1996-2012. All Rights Reserved.
%%
%% The contents of this file are subject to the Erlang Public License,
%% Version 1.1, (the "License"); you may not use this file except in
@@ -515,7 +515,7 @@ handle_call({backup, BackupDir}, From,
{reply, Error, State}
end;
-handle_call({backup, _BackupDir}, From, #state{backup = Backup} = S) ->
+handle_call({backup, _BackupDir}, _From, #state{backup = Backup} = S) ->
?vinfo("backup already in progress: ~p", [Backup]),
{reply, {error, backup_in_progress}, S};
diff --git a/lib/snmp/src/agent/snmpa_mib.erl b/lib/snmp/src/agent/snmpa_mib.erl
index 574467d38f..575a018c0c 100644
--- a/lib/snmp/src/agent/snmpa_mib.erl
+++ b/lib/snmp/src/agent/snmpa_mib.erl
@@ -580,7 +580,7 @@ handle_call({backup, BackupDir}, From,
{reply, Error, State}
end;
-handle_call({backup, _BackupDir}, From, #state{backup = Backup} = S) ->
+handle_call({backup, _BackupDir}, _From, #state{backup = Backup} = S) ->
?vinfo("backup already in progress: ~p", [Backup]),
{reply, {error, backup_in_progress}, S};
diff --git a/lib/snmp/src/app/snmp.app.src b/lib/snmp/src/app/snmp.app.src
index a880a14696..b11c1ef934 100644
--- a/lib/snmp/src/app/snmp.app.src
+++ b/lib/snmp/src/app/snmp.app.src
@@ -1,7 +1,7 @@
%%
%% %CopyrightBegin%
%%
-%% Copyright Ericsson AB 1996-2009. All Rights Reserved.
+%% Copyright Ericsson AB 1996-2012. All Rights Reserved.
%%
%% The contents of this file are subject to the Erlang Public License,
%% Version 1.1, (the "License"); you may not use this file except in
@@ -91,6 +91,7 @@
snmpm_mpd,
snmpm_net_if,
snmpm_net_if_filter,
+ snmpm_net_if_mt,
snmpm_network_interface,
snmpm_network_interface_filter,
snmpm_server,
diff --git a/lib/snmp/src/app/snmp.appup.src b/lib/snmp/src/app/snmp.appup.src
index c8e5eec6db..8360d88c94 100644
--- a/lib/snmp/src/app/snmp.appup.src
+++ b/lib/snmp/src/app/snmp.appup.src
@@ -22,66 +22,181 @@
%% ----- U p g r a d e -------------------------------------------------------
[
+ {"4.21.7",
+ [
+ {load_module, snmp_config, soft_purge, soft_purge, []},
+ {load_module, snmp_conf, soft_purge, soft_purge, []},
+ {load_module, snmp_community_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_framework_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_notification_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_standard_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_target_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_user_based_sm_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge, [snmp_conf]},
+
+ {load_module, snmp, soft_purge, soft_purge, [snmp_log]},
+ {load_module, snmpa, soft_purge, soft_purge, [snmp]},
+ {load_module, snmpm, soft_purge, soft_purge, [snmp]},
+ {load_module, snmp_log, soft_purge, soft_purge, []},
+ {load_module, snmp_verbosity, soft_purge, soft_purge, []},
+ {load_module, snmpm_mpd, soft_purge, soft_purge, []},
+
+ {update, snmpa_local_db, soft, soft_purge, soft_purge, []},
+ {update, snmpa_mib, soft, soft_purge, soft_purge, []},
+ {update, snmpa_agent, soft, soft_purge, soft_purge, []},
+
+ {add_module, snmpm_net_if_mt}
+ ]
+ },
{"4.21.6",
[
+ {load_module, snmp_config, soft_purge, soft_purge, []},
+ {load_module, snmp_conf, soft_purge, soft_purge, []},
+ {load_module, snmp_community_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_framework_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_notification_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_standard_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_target_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_user_based_sm_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge, [snmp_conf]},
+
+ {load_module, snmp, soft_purge, soft_purge, [snmp_log]},
+ {load_module, snmpa, soft_purge, soft_purge, [snmp]},
+ {load_module, snmpm, soft_purge, soft_purge, [snmp]},
+ {load_module, snmp_log, soft_purge, soft_purge, []},
+ {load_module, snmp_verbosity, soft_purge, soft_purge, []},
+ {load_module, snmpm_mpd, soft_purge, soft_purge, []},
+
{update, snmpa_local_db, soft, soft_purge, soft_purge, []},
{update, snmpa_mib, soft, soft_purge, soft_purge, []},
- {update, snmpa_agent, soft, soft_purge, soft_purge, []}
+ {update, snmpa_agent, soft, soft_purge, soft_purge, []},
+
+ {add_module, snmpm_net_if_mt}
]
},
{"4.21.5",
[
- {load_module, snmpa, soft_purge, soft_purge, []},
- {load_module, snmp_target_mib, soft_purge, soft_purge, [snmpa_mib_lib]},
+ {load_module, snmp_config, soft_purge, soft_purge, []},
+ {load_module, snmp_conf, soft_purge, soft_purge, []},
+ {load_module, snmp_community_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_framework_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_notification_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_standard_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_user_based_sm_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge, [snmp_conf]},
+
+ {load_module, snmp, soft_purge, soft_purge, [snmp_log]},
+ {load_module, snmpm, soft_purge, soft_purge, [snmp]},
+ {load_module, snmp_log, soft_purge, soft_purge, []},
+ {load_module, snmp_verbosity, soft_purge, soft_purge, []},
+ {load_module, snmpm_mpd, soft_purge, soft_purge, []},
+
+ {load_module, snmpa, soft_purge, soft_purge, [snmp]},
+ {load_module, snmp_target_mib, soft_purge, soft_purge,
+ [snmp_conf, snmpa_mib_lib]},
{load_module, snmpa_mib_lib, soft_purge, soft_purge, []},
{load_module, snmpa_trap, soft_purge, soft_purge, []},
{load_module, snmpa_vacm, soft_purge, soft_purge, []},
{update, snmpa_local_db, soft, soft_purge, soft_purge, []},
{update, snmpa_mib, soft, soft_purge, soft_purge, []},
{update, snmpa_supervisor, soft, soft_purge, soft_purge, []},
- {update, snmpa_agent, soft, soft_purge, soft_purge, []}
+ {update, snmpa_agent, soft, soft_purge, soft_purge, []},
+
+ {add_module, snmpm_net_if_mt}
]
},
{"4.21.4",
[
- {load_module, snmpa, soft_purge, soft_purge, []},
- {load_module, snmp_target_mib, soft_purge, soft_purge, [snmpa_mib_lib]},
+ {load_module, snmp_config, soft_purge, soft_purge, []},
+ {load_module, snmp_conf, soft_purge, soft_purge, []},
+ {load_module, snmp_community_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_framework_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_notification_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_standard_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_user_based_sm_mib, soft_purge, soft_purge, [snmp_conf]},
+
+ {load_module, snmp, soft_purge, soft_purge, [snmp_log]},
+ {load_module, snmpm, soft_purge, soft_purge, [snmp]},
+ {load_module, snmp_log, soft_purge, soft_purge, []},
+ {load_module, snmp_verbosity, soft_purge, soft_purge, []},
+ {load_module, snmpm_mpd, soft_purge, soft_purge, []},
+
+ {load_module, snmpa, soft_purge, soft_purge, [snmp]},
+ {load_module, snmp_target_mib, soft_purge, soft_purge,
+ [snmp_conf, snmpa_mib_lib]},
{load_module, snmpa_mib_lib, soft_purge, soft_purge, []},
{load_module, snmpa_trap, soft_purge, soft_purge, []},
{update, snmpa_supervisor, soft, soft_purge, soft_purge, []},
{load_module, snmp_generic_mnesia, soft_purge, soft_purge, []},
- {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge, []},
+ {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge,
+ [snmp_conf]},
{load_module, snmpa_vacm, soft_purge, soft_purge, []},
{update, snmpa_local_db, soft, soft_purge, soft_purge, []},
{update, snmpa_mib, soft, soft_purge, soft_purge, []},
- {update, snmpa_agent, soft, soft_purge, soft_purge, []}
+ {update, snmpa_agent, soft, soft_purge, soft_purge, []},
+
+ {add_module, snmpm_net_if_mt}
]
},
{"4.21.3",
[
- {load_module, snmpa, soft_purge, soft_purge, []},
- {load_module, snmp_target_mib, soft_purge, soft_purge, [snmpa_mib_lib]},
+ {load_module, snmp_config, soft_purge, soft_purge, []},
+ {load_module, snmp_conf, soft_purge, soft_purge, []},
+ {load_module, snmp_community_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_framework_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_notification_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_standard_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_user_based_sm_mib, soft_purge, soft_purge, [snmp_conf]},
+
+ {load_module, snmp, soft_purge, soft_purge, [snmp_log]},
+ {load_module, snmpm, soft_purge, soft_purge, [snmp]},
+ {load_module, snmp_log, soft_purge, soft_purge, []},
+ {load_module, snmp_verbosity, soft_purge, soft_purge, []},
+ {load_module, snmpm_mpd, soft_purge, soft_purge, []},
+
+ {load_module, snmpa, soft_purge, soft_purge, [snmp]},
+ {load_module, snmp_target_mib, soft_purge, soft_purge,
+ [snmp_conf, snmpa_mib_lib]},
{load_module, snmpa_mib_lib, soft_purge, soft_purge, []},
{load_module, snmpa_trap, soft_purge, soft_purge, []},
{update, snmpa_supervisor, soft, soft_purge, soft_purge, []},
{load_module, snmp_generic_mnesia, soft_purge, soft_purge, []},
- {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge, []},
+ {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge,
+ [snmp_conf]},
{load_module, snmpa_vacm, soft_purge, soft_purge, []},
{update, snmpa_local_db, soft, soft_purge, soft_purge, []},
{update, snmpa_mib, soft, soft_purge, soft_purge, []},
- {update, snmpa_agent, soft, soft_purge, soft_purge, []}
+ {update, snmpa_agent, soft, soft_purge, soft_purge, []},
+
+ {add_module, snmpm_net_if_mt}
]
},
{"4.21.2",
[
- {load_module, snmpa, soft_purge, soft_purge, []},
- {load_module, snmp_target_mib, soft_purge, soft_purge, [snmpa_mib_lib]},
+ {load_module, snmp_config, soft_purge, soft_purge, []},
+ {load_module, snmp_conf, soft_purge, soft_purge, []},
+ {load_module, snmp_community_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_framework_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_notification_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_standard_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_user_based_sm_mib, soft_purge, soft_purge, [snmp_conf]},
+
+ {load_module, snmp, soft_purge, soft_purge, [snmp_log]},
+ {load_module, snmpm, soft_purge, soft_purge, [snmp]},
+ {load_module, snmp_log, soft_purge, soft_purge, []},
+ {load_module, snmp_verbosity, soft_purge, soft_purge, []},
+ {load_module, snmpm_mpd, soft_purge, soft_purge, []},
+
+ {load_module, snmpa, soft_purge, soft_purge, [snmp]},
+ {load_module, snmp_target_mib, soft_purge, soft_purge,
+ [snmp_conf, snmpa_mib_lib]},
{load_module, snmpa_mib_lib, soft_purge, soft_purge, []},
{update, snmpa_supervisor, soft, soft_purge, soft_purge, []},
- {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge, []},
+ {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge,
+ [snmp_conf]},
{load_module, snmpa_vacm, soft_purge, soft_purge, []},
{load_module, snmpa_mpd, soft_purge, soft_purge, []},
{load_module, snmpa_set_lib, soft_purge, soft_purge, []},
@@ -89,17 +204,35 @@
{load_module, snmp_generic_mnesia, soft_purge, soft_purge, []},
{update, snmpa_local_db, soft, soft_purge, soft_purge, []},
{update, snmpa_mib, soft, soft_purge, soft_purge, []},
- {update, snmpa_agent, soft, soft_purge, soft_purge, []}
+ {update, snmpa_agent, soft, soft_purge, soft_purge, []},
+
+ {add_module, snmpm_net_if_mt}
]
},
{"4.21.1",
[
- {load_module, snmpa, soft_purge, soft_purge, []},
- {load_module, snmp_target_mib, soft_purge, soft_purge, [snmpa_mib_lib]},
+ {load_module, snmp_config, soft_purge, soft_purge, []},
+ {load_module, snmp_conf, soft_purge, soft_purge, []},
+ {load_module, snmp_community_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_framework_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_notification_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_standard_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_user_based_sm_mib, soft_purge, soft_purge, [snmp_conf]},
+
+ {load_module, snmp, soft_purge, soft_purge, [snmp_log]},
+ {load_module, snmpm, soft_purge, soft_purge, [snmp]},
+ {load_module, snmp_log, soft_purge, soft_purge, []},
+ {load_module, snmp_verbosity, soft_purge, soft_purge, []},
+ {load_module, snmpm_mpd, soft_purge, soft_purge, []},
+
+ {load_module, snmpa, soft_purge, soft_purge, [snmp]},
+ {load_module, snmp_target_mib, soft_purge, soft_purge,
+ [snmp_conf, snmpa_mib_lib]},
{load_module, snmpa_mib_lib, soft_purge, soft_purge, []},
{update, snmpa_supervisor, soft, soft_purge, soft_purge, []},
- {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge, []},
+ {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge,
+ [snmp_conf]},
{load_module, snmpa_vacm, soft_purge, soft_purge, []},
{load_module, snmpa_mpd, soft_purge, soft_purge, []},
{load_module, snmpa_set_lib, soft_purge, soft_purge, []},
@@ -108,91 +241,46 @@
{update, snmpa_local_db, soft, soft_purge, soft_purge, []},
{update, snmpa_mib, soft, soft_purge, soft_purge, []},
{update, snmpa_agent, soft, soft_purge, soft_purge, []},
- {update, snmp_note_store, soft, soft_purge, soft_purge, []}
+ {update, snmp_note_store, soft, soft_purge, soft_purge, []},
+
+ {add_module, snmpm_net_if_mt}
]
},
{"4.21",
[
- {load_module, snmpa, soft_purge, soft_purge, []},
+ {load_module, snmp_config, soft_purge, soft_purge, []},
+ {load_module, snmp_conf, soft_purge, soft_purge, []},
+ {load_module, snmp_community_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_framework_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_notification_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_standard_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_user_based_sm_mib, soft_purge, soft_purge, [snmp_conf]},
+
+ {load_module, snmp, soft_purge, soft_purge, [snmp_log]},
+ {load_module, snmpm, soft_purge, soft_purge, [snmp]},
+ {load_module, snmp_log, soft_purge, soft_purge, []},
+ {load_module, snmp_verbosity, soft_purge, soft_purge, []},
+ {load_module, snmpm_mpd, soft_purge, soft_purge, []},
+
+ {load_module, snmpa, soft_purge, soft_purge, [snmp]},
{load_module, snmpa_mib_lib, soft_purge, soft_purge, []},
{update, snmpa_supervisor, soft, soft_purge, soft_purge, []},
- {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge, []},
+ {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge,
+ [snmp_conf]},
{load_module, snmpa_vacm, soft_purge, soft_purge, []},
{load_module, snmpa_mpd, soft_purge, soft_purge, []},
{load_module, snmpa_set_lib, soft_purge, soft_purge, []},
{load_module, snmpa_trap, soft_purge, soft_purge, []},
- {load_module, snmp_target_mib, soft_purge, soft_purge, [snmpa_mib_lib]},
+ {load_module, snmp_target_mib, soft_purge, soft_purge,
+ [snmp_conf, snmpa_mib_lib]},
{load_module, snmp_generic_mnesia, soft_purge, soft_purge, []},
{update, snmpa_local_db, soft, soft_purge, soft_purge, []},
{update, snmpa_mib, soft, soft_purge, soft_purge, []},
{update, snmpa_agent, soft, soft_purge, soft_purge, []},
- {update, snmp_note_store, soft, soft_purge, soft_purge, []}
- ]
- },
- {"4.20.1",
- [
- {load_module, snmpa, soft_purge, soft_purge, []},
- {load_module, snmpa_mib_lib, soft_purge, soft_purge, []},
- {update, snmpa_supervisor, soft, soft_purge, soft_purge, []},
-
- {load_module, snmpa_vacm, soft_purge, soft_purge, []},
- {load_module, snmpa_set_lib, soft_purge, soft_purge, []},
- {load_module, snmpa_trap, soft_purge, soft_purge, []},
- {load_module, snmp_target_mib, soft_purge, soft_purge, [snmpa_mib_lib]},
- {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge, []},
- {load_module, snmpm, soft_purge, soft_purge,
- [snmpm_server, snmpm_config, snmp_config]},
- {load_module, snmp_conf, soft_purge, soft_purge, []},
- {load_module, snmp_config, soft_purge, soft_purge, []},
- {load_module, snmpm_mpd, soft_purge, soft_purge,
- [snmp_conf, snmp_config, snmpm_config]},
- {load_module, snmpa_mpd, soft_purge, soft_purge,
- [snmp_conf, snmp_config]},
- {load_module, snmpa_conf, soft_purge, soft_purge, [snmp_config]},
- {update, snmp_note_store, soft, soft_purge, soft_purge, []},
- {load_module, snmp_generic_mnesia, soft_purge, soft_purge, []},
- {update, snmpa_local_db, soft, soft_purge, soft_purge, []},
- {update, snmpa_mib, soft, soft_purge, soft_purge, []},
- {update, snmpa_agent, soft, soft_purge, soft_purge, [snmpa_mpd]},
- {update, snmpm_config, soft, soft_purge, soft_purge, [snmp_conf]},
- {update, snmpm_server, soft, soft_purge, soft_purge,
- [snmpm_net_if, snmpm_mpd, snmpm_config]},
- {update, snmpm_net_if, soft, soft_purge, soft_purge,
- [snmp_conf, snmpm_mpd, snmpm_config]}
- ]
- },
- {"4.20",
- [
- {load_module, snmpa, soft_purge, soft_purge, []},
- {load_module, snmpa_mib_lib, soft_purge, soft_purge, []},
- {update, snmpa_supervisor, soft, soft_purge, soft_purge, []},
+ {update, snmp_note_store, soft, soft_purge, soft_purge, []},
- {load_module, snmpa_vacm, soft_purge, soft_purge, []},
- {load_module, snmpa_set_lib, soft_purge, soft_purge, []},
- {load_module, snmpa_trap, soft_purge, soft_purge, []},
- {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge, []},
- {load_module, snmp_target_mib, soft_purge, soft_purge,
- [snmpa_mib_lib, snmp_conf]},
- {load_module, snmpm, soft_purge, soft_purge,
- [snmpm_server, snmpm_config, snmp_config]},
- {load_module, snmp_conf, soft_purge, soft_purge, []},
- {load_module, snmp_config, soft_purge, soft_purge, []},
- {load_module, snmpm_mpd, soft_purge, soft_purge,
- [snmp_conf, snmp_config, snmpm_config]},
- {load_module, snmpa_mpd, soft_purge, soft_purge,
- [snmp_conf, snmp_config]},
- {load_module, snmpa_conf, soft_purge, soft_purge, [snmp_config]},
- {update, snmp_note_store, soft, soft_purge, soft_purge, []},
- {load_module, snmp_generic_mnesia, soft_purge, soft_purge, []},
- {update, snmpa_local_db, soft, soft_purge, soft_purge, []},
- {update, snmpa_mib, soft, soft_purge, soft_purge, []},
- {update, snmpa_agent, soft, soft_purge, soft_purge, [snmpa_mpd]},
- {update, snmpm_config, soft, soft_purge, soft_purge, [snmp_conf]},
- {update, snmpm_server, soft, soft_purge, soft_purge,
- [snmpm_net_if, snmpm_mpd, snmpm_config]},
- {update, snmpm_net_if, soft, soft_purge, soft_purge,
- [snmp_conf, snmpm_mpd, snmpm_config]}
+ {add_module, snmpm_net_if_mt}
]
}
],
@@ -200,66 +288,181 @@
%% ------D o w n g r a d e ---------------------------------------------------
[
+ {"4.21.7",
+ [
+ {load_module, snmp_config, soft_purge, soft_purge, []},
+ {load_module, snmp_conf, soft_purge, soft_purge, []},
+ {load_module, snmp_community_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_framework_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_notification_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_standard_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_target_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_user_based_sm_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge, [snmp_conf]},
+
+ {load_module, snmp, soft_purge, soft_purge, [snmp_log]},
+ {load_module, snmpa, soft_purge, soft_purge, [snmp]},
+ {load_module, snmpm, soft_purge, soft_purge, [snmp]},
+ {load_module, snmp_log, soft_purge, soft_purge, []},
+ {load_module, snmp_verbosity, soft_purge, soft_purge, []},
+ {load_module, snmpm_mpd, soft_purge, soft_purge, []},
+
+ {update, snmpa_local_db, soft, soft_purge, soft_purge, []},
+ {update, snmpa_mib, soft, soft_purge, soft_purge, []},
+ {update, snmpa_agent, soft, soft_purge, soft_purge, []},
+
+ {remove, {snmpm_net_if_mt, soft_purge, soft_purge}}
+ ]
+ },
{"4.21.6",
[
+ {load_module, snmp_config, soft_purge, soft_purge, []},
+ {load_module, snmp_conf, soft_purge, soft_purge, []},
+ {load_module, snmp_community_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_framework_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_notification_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_standard_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_target_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_user_based_sm_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge, [snmp_conf]},
+
+ {load_module, snmp, soft_purge, soft_purge, [snmp_log]},
+ {load_module, snmpa, soft_purge, soft_purge, [snmp]},
+ {load_module, snmpm, soft_purge, soft_purge, [snmp]},
+ {load_module, snmp_log, soft_purge, soft_purge, []},
+ {load_module, snmp_verbosity, soft_purge, soft_purge, []},
+ {load_module, snmpm_mpd, soft_purge, soft_purge, []},
+
{update, snmpa_local_db, soft, soft_purge, soft_purge, []},
{update, snmpa_mib, soft, soft_purge, soft_purge, []},
- {update, snmpa_agent, soft, soft_purge, soft_purge, []}
+ {update, snmpa_agent, soft, soft_purge, soft_purge, []},
+
+ {remove, {snmpm_net_if_mt, soft_purge, soft_purge}}
]
},
{"4.21.5",
[
- {load_module, snmpa, soft_purge, soft_purge, []},
- {load_module, snmp_target_mib, soft_purge, soft_purge, [snmpa_mib_lib]},
+ {load_module, snmp_config, soft_purge, soft_purge, []},
+ {load_module, snmp_conf, soft_purge, soft_purge, []},
+ {load_module, snmp_community_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_framework_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_notification_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_standard_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_user_based_sm_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge, [snmp_conf]},
+
+ {load_module, snmp, soft_purge, soft_purge, [snmp_log]},
+ {load_module, snmpm, soft_purge, soft_purge, [snmp]},
+ {load_module, snmp_log, soft_purge, soft_purge, []},
+ {load_module, snmp_verbosity, soft_purge, soft_purge, []},
+ {load_module, snmpm_mpd, soft_purge, soft_purge, []},
+
+ {load_module, snmpa, soft_purge, soft_purge, [snmp]},
+ {load_module, snmp_target_mib, soft_purge, soft_purge,
+ [snmp_conf, snmpa_mib_lib]},
{load_module, snmpa_mib_lib, soft_purge, soft_purge, []},
{load_module, snmpa_trap, soft_purge, soft_purge, []},
{load_module, snmpa_vacm, soft_purge, soft_purge, []},
{update, snmpa_supervisor, soft, soft_purge, soft_purge, []},
{update, snmpa_local_db, soft, soft_purge, soft_purge, []},
{update, snmpa_mib, soft, soft_purge, soft_purge, []},
- {update, snmpa_agent, soft, soft_purge, soft_purge, []}
+ {update, snmpa_agent, soft, soft_purge, soft_purge, []},
+
+ {remove, {snmpm_net_if_mt, soft_purge, soft_purge}}
]
},
{"4.21.4",
[
- {load_module, snmpa, soft_purge, soft_purge, []},
- {load_module, snmp_target_mib, soft_purge, soft_purge, [snmpa_mib_lib]},
+ {load_module, snmp_config, soft_purge, soft_purge, []},
+ {load_module, snmp_conf, soft_purge, soft_purge, []},
+ {load_module, snmp_community_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_framework_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_notification_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_standard_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_user_based_sm_mib, soft_purge, soft_purge, [snmp_conf]},
+
+ {load_module, snmp, soft_purge, soft_purge, [snmp_log]},
+ {load_module, snmpm, soft_purge, soft_purge, [snmp]},
+ {load_module, snmp_log, soft_purge, soft_purge, []},
+ {load_module, snmp_verbosity, soft_purge, soft_purge, []},
+ {load_module, snmpm_mpd, soft_purge, soft_purge, []},
+
+ {load_module, snmpa, soft_purge, soft_purge, [snmp]},
+ {load_module, snmp_target_mib, soft_purge, soft_purge,
+ [snmp_conf, snmpa_mib_lib]},
{load_module, snmpa_mib_lib, soft_purge, soft_purge, []},
{load_module, snmpa_trap, soft_purge, soft_purge, []},
{update, snmpa_supervisor, soft, soft_purge, soft_purge, []},
{load_module, snmp_generic_mnesia, soft_purge, soft_purge, []},
- {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge, []},
+ {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge,
+ [snmp_conf]},
{load_module, snmpa_vacm, soft_purge, soft_purge, []},
{update, snmpa_local_db, soft, soft_purge, soft_purge, []},
{update, snmpa_mib, soft, soft_purge, soft_purge, []},
- {update, snmpa_agent, soft, soft_purge, soft_purge, []}
+ {update, snmpa_agent, soft, soft_purge, soft_purge, []},
+
+ {remove, {snmpm_net_if_mt, soft_purge, soft_purge}}
]
},
{"4.21.3",
[
- {load_module, snmpa, soft_purge, soft_purge, []},
- {load_module, snmp_target_mib, soft_purge, soft_purge, [snmpa_mib_lib]},
+ {load_module, snmp_config, soft_purge, soft_purge, []},
+ {load_module, snmp_conf, soft_purge, soft_purge, []},
+ {load_module, snmp_community_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_framework_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_notification_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_standard_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_user_based_sm_mib, soft_purge, soft_purge, [snmp_conf]},
+
+ {load_module, snmp, soft_purge, soft_purge, [snmp_log]},
+ {load_module, snmpm, soft_purge, soft_purge, [snmp]},
+ {load_module, snmp_log, soft_purge, soft_purge, []},
+ {load_module, snmp_verbosity, soft_purge, soft_purge, []},
+ {load_module, snmpm_mpd, soft_purge, soft_purge, []},
+
+ {load_module, snmpa, soft_purge, soft_purge, [snmp]},
+ {load_module, snmp_target_mib, soft_purge, soft_purge,
+ [snmp_conf, snmpa_mib_lib]},
{load_module, snmpa_mib_lib, soft_purge, soft_purge, []},
{load_module, snmpa_trap, soft_purge, soft_purge, []},
{update, snmpa_supervisor, soft, soft_purge, soft_purge, []},
{load_module, snmp_generic_mnesia, soft_purge, soft_purge, []},
- {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge, []},
+ {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge,
+ [snmp_conf]},
{load_module, snmpa_vacm, soft_purge, soft_purge, []},
{update, snmpa_local_db, soft, soft_purge, soft_purge, []},
{update, snmpa_mib, soft, soft_purge, soft_purge, []},
- {update, snmpa_agent, soft, soft_purge, soft_purge, []}
+ {update, snmpa_agent, soft, soft_purge, soft_purge, []},
+
+ {remove, {snmpm_net_if_mt, soft_purge, soft_purge}}
]
},
{"4.21.2",
[
- {load_module, snmpa, soft_purge, soft_purge, []},
- {load_module, snmp_target_mib, soft_purge, soft_purge, [snmpa_mib_lib]},
+ {load_module, snmp_config, soft_purge, soft_purge, []},
+ {load_module, snmp_conf, soft_purge, soft_purge, []},
+ {load_module, snmp_community_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_framework_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_notification_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_standard_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_user_based_sm_mib, soft_purge, soft_purge, [snmp_conf]},
+
+ {load_module, snmp, soft_purge, soft_purge, [snmp_log]},
+ {load_module, snmpm, soft_purge, soft_purge, [snmp]},
+ {load_module, snmp_log, soft_purge, soft_purge, []},
+ {load_module, snmp_verbosity, soft_purge, soft_purge, []},
+ {load_module, snmpm_mpd, soft_purge, soft_purge, []},
+
+ {load_module, snmpa, soft_purge, soft_purge, [snmp]},
+ {load_module, snmp_target_mib, soft_purge, soft_purge,
+ [snmp_conf, snmpa_mib_lib]},
{load_module, snmpa_mib_lib, soft_purge, soft_purge, []},
{update, snmpa_supervisor, soft, soft_purge, soft_purge, []},
- {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge, []},
+ {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge,
+ [snmp_conf]},
{load_module, snmpa_vacm, soft_purge, soft_purge, []},
{load_module, snmpa_mpd, soft_purge, soft_purge, []},
{load_module, snmpa_set_lib, soft_purge, soft_purge, []},
@@ -267,17 +470,35 @@
{load_module, snmp_generic_mnesia, soft_purge, soft_purge, []},
{update, snmpa_local_db, soft, soft_purge, soft_purge, []},
{update, snmpa_mib, soft, soft_purge, soft_purge, []},
- {update, snmpa_agent, soft, soft_purge, soft_purge, []}
+ {update, snmpa_agent, soft, soft_purge, soft_purge, []},
+
+ {remove, {snmpm_net_if_mt, soft_purge, soft_purge}}
]
},
{"4.21.1",
[
- {load_module, snmpa, soft_purge, soft_purge, []},
- {load_module, snmp_target_mib, soft_purge, soft_purge, [snmpa_mib_lib]},
+ {load_module, snmp_config, soft_purge, soft_purge, []},
+ {load_module, snmp_conf, soft_purge, soft_purge, []},
+ {load_module, snmp_community_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_framework_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_notification_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_standard_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_user_based_sm_mib, soft_purge, soft_purge, [snmp_conf]},
+
+ {load_module, snmp, soft_purge, soft_purge, [snmp_log]},
+ {load_module, snmpm, soft_purge, soft_purge, [snmp]},
+ {load_module, snmp_log, soft_purge, soft_purge, []},
+ {load_module, snmp_verbosity, soft_purge, soft_purge, []},
+ {load_module, snmpm_mpd, soft_purge, soft_purge, []},
+
+ {load_module, snmpa, soft_purge, soft_purge, [snmp]},
+ {load_module, snmp_target_mib, soft_purge, soft_purge,
+ [snmp_conf, snmpa_mib_lib]},
{load_module, snmpa_mib_lib, soft_purge, soft_purge, []},
{update, snmpa_supervisor, soft, soft_purge, soft_purge, []},
- {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge, []},
+ {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge,
+ [snmp_conf]},
{load_module, snmpa_vacm, soft_purge, soft_purge, []},
{load_module, snmpa_mpd, soft_purge, soft_purge, []},
{load_module, snmpa_set_lib, soft_purge, soft_purge, []},
@@ -286,90 +507,46 @@
{update, snmpa_local_db, soft, soft_purge, soft_purge, []},
{update, snmpa_mib, soft, soft_purge, soft_purge, []},
{update, snmpa_agent, soft, soft_purge, soft_purge, []},
- {update, snmp_note_store, soft, soft_purge, soft_purge, []}
+ {update, snmp_note_store, soft, soft_purge, soft_purge, []},
+
+ {remove, {snmpm_net_if_mt, soft_purge, soft_purge}}
]
},
{"4.21",
[
- {load_module, snmpa, soft_purge, soft_purge, []},
+ {load_module, snmp_config, soft_purge, soft_purge, []},
+ {load_module, snmp_conf, soft_purge, soft_purge, []},
+ {load_module, snmp_community_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_framework_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_notification_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_standard_mib, soft_purge, soft_purge, [snmp_conf]},
+ {load_module, snmp_user_based_sm_mib, soft_purge, soft_purge, [snmp_conf]},
+
+ {load_module, snmp, soft_purge, soft_purge, [snmp_log]},
+ {load_module, snmpm, soft_purge, soft_purge, [snmp]},
+ {load_module, snmp_log, soft_purge, soft_purge, []},
+ {load_module, snmp_verbosity, soft_purge, soft_purge, []},
+ {load_module, snmpm_mpd, soft_purge, soft_purge, []},
+
+ {load_module, snmpa, soft_purge, soft_purge, [snmp]},
{load_module, snmpa_mib_lib, soft_purge, soft_purge, []},
{update, snmpa_supervisor, soft, soft_purge, soft_purge, []},
- {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge, []},
+ {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge,
+ [snmp_conf]},
{load_module, snmpa_vacm, soft_purge, soft_purge, []},
{load_module, snmpa_mpd, soft_purge, soft_purge, []},
{load_module, snmpa_set_lib, soft_purge, soft_purge, []},
{load_module, snmpa_trap, soft_purge, soft_purge, []},
- {load_module, snmp_target_mib, soft_purge, soft_purge, []},
+ {load_module, snmp_target_mib, soft_purge, soft_purge,
+ [snmp_conf, snmpa_mib_lib]},
{load_module, snmp_generic_mnesia, soft_purge, soft_purge, []},
{update, snmpa_local_db, soft, soft_purge, soft_purge, []},
{update, snmpa_mib, soft, soft_purge, soft_purge, []},
{update, snmpa_agent, soft, soft_purge, soft_purge, []},
- {update, snmp_note_store, soft, soft_purge, soft_purge, []}
- ]
- },
- {"4.20.1",
- [
- {load_module, snmpa, soft_purge, soft_purge, []},
- {load_module, snmpa_mib_lib, soft_purge, soft_purge, []},
- {update, snmpa_supervisor, soft, soft_purge, soft_purge, []},
-
- {load_module, snmpa_vacm, soft_purge, soft_purge, []},
- {load_module, snmpa_set_lib, soft_purge, soft_purge, []},
- {load_module, snmpa_trap, soft_purge, soft_purge, []},
- {load_module, snmp_target_mib, soft_purge, soft_purge, []},
- {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge, []},
- {load_module, snmpm, soft_purge, soft_purge,
- [snmpm_server, snmpm_config, snmp_config]},
- {load_module, snmp_conf, soft_purge, soft_purge, []},
- {load_module, snmp_config, soft_purge, soft_purge, []},
- {load_module, snmpm_mpd, soft_purge, soft_purge,
- [snmp_conf, snmp_config, snmpm_config]},
- {load_module, snmpa_mpd, soft_purge, soft_purge,
- [snmp_conf, snmp_config]},
- {load_module, snmpa_conf, soft_purge, soft_purge, [snmp_config]},
{update, snmp_note_store, soft, soft_purge, soft_purge, []},
- {load_module, snmp_generic_mnesia, soft_purge, soft_purge, []},
- {update, snmpa_local_db, soft, soft_purge, soft_purge, []},
- {update, snmpa_mib, soft, soft_purge, soft_purge, []},
- {update, snmpa_agent, soft, soft_purge, soft_purge, [snmpa_mpd]},
- {update, snmpm_config, soft, soft_purge, soft_purge, [snmp_conf]},
- {update, snmpm_server, soft, soft_purge, soft_purge,
- [snmpm_net_if, snmpm_mpd, snmpm_config]},
- {update, snmpm_net_if, soft, soft_purge, soft_purge,
- [snmp_conf, snmpm_mpd, snmpm_config]}
- ]
- },
- {"4.20",
- [
- {load_module, snmpa, soft_purge, soft_purge, []},
- {load_module, snmpa_mib_lib, soft_purge, soft_purge, []},
- {update, snmpa_supervisor, soft, soft_purge, soft_purge, []},
- {load_module, snmpa_vacm, soft_purge, soft_purge, []},
- {load_module, snmpa_set_lib, soft_purge, soft_purge, []},
- {load_module, snmpa_trap, soft_purge, soft_purge, []},
- {load_module, snmp_view_based_acm_mib, soft_purge, soft_purge, []},
- {load_module, snmp_target_mib, soft_purge, soft_purge, [snmp_conf]},
- {load_module, snmpm, soft_purge, soft_purge,
- [snmpm_server, snmpm_config, snmp_config]},
- {load_module, snmp_conf, soft_purge, soft_purge, []},
- {load_module, snmp_config, soft_purge, soft_purge, []},
- {load_module, snmpm_mpd, soft_purge, soft_purge,
- [snmp_conf, snmp_config, snmpm_config]},
- {load_module, snmpa_mpd, soft_purge, soft_purge,
- [snmp_conf, snmp_config]},
- {load_module, snmpa_conf, soft_purge, soft_purge, [snmp_config]},
- {update, snmp_note_store, soft, soft_purge, soft_purge, []},
- {load_module, snmp_generic_mnesia, soft_purge, soft_purge, []},
- {update, snmpa_local_db, soft, soft_purge, soft_purge, []},
- {update, snmpa_mib, soft, soft_purge, soft_purge, []},
- {update, snmpa_agent, soft, soft_purge, soft_purge, [snmpa_mpd]},
- {update, snmpm_config, soft, soft_purge, soft_purge, [snmp_conf]},
- {update, snmpm_server, soft, soft_purge, soft_purge,
- [snmpm_net_if, snmpm_mpd, snmpm_config]},
- {update, snmpm_net_if, soft, soft_purge, soft_purge,
- [snmp_conf, snmpm_mpd, snmpm_config]}
+ {remove, {snmpm_net_if_mt, soft_purge, soft_purge}}
]
}
]
diff --git a/lib/snmp/src/app/snmp.erl b/lib/snmp/src/app/snmp.erl
index 3e0f05e604..fc03757e3f 100644
--- a/lib/snmp/src/app/snmp.erl
+++ b/lib/snmp/src/app/snmp.erl
@@ -50,6 +50,7 @@
read_mib/1,
log_to_txt/5, log_to_txt/6, log_to_txt/7,
+ log_to_io/4, log_to_io/5, log_to_io/6,
change_log_size/2,
octet_string_to_bits/1, bits_to_octet_string/1,
@@ -843,6 +844,12 @@ log_to_txt(LogDir, Mibs, OutFile, LogName, LogFile, Start) ->
log_to_txt(LogDir, Mibs, OutFile, LogName, LogFile, Start, Stop) ->
snmp_log:log_to_txt(LogName, LogFile, LogDir, Mibs, OutFile, Start, Stop).
+log_to_io(LogDir, Mibs, LogName, LogFile) ->
+ snmp_log:log_to_io(LogName, LogFile, LogDir, Mibs).
+log_to_io(LogDir, Mibs, LogName, LogFile, Start) ->
+ snmp_log:log_to_io(LogName, LogFile, LogDir, Mibs, Start).
+log_to_io(LogDir, Mibs, LogName, LogFile, Start, Stop) ->
+ snmp_log:log_to_io(LogName, LogFile, LogDir, Mibs, Start, Stop).
change_log_size(LogName, NewSize) ->
snmp_log:change_size(LogName, NewSize).
diff --git a/lib/snmp/src/compile/snmpc_lib.erl b/lib/snmp/src/compile/snmpc_lib.erl
index 38bb8f3ac6..6e833b6c44 100644
--- a/lib/snmp/src/compile/snmpc_lib.erl
+++ b/lib/snmp/src/compile/snmpc_lib.erl
@@ -704,23 +704,29 @@ check_trap_name(EnterpriseName, Line, MEs) ->
%% This information is needed to be able to create default instrumentation
%% functions for tables.
%%----------------------------------------------------------------------
-make_table_info(Line, _TableName, {augments,SrcTableEntry}, ColumnMEs) ->
+make_table_info(Line, TableName, {augments, SrcTableEntry}, ColumnMEs) ->
ColMEs = lists:keysort(#me.oid, ColumnMEs),
- %% Nbr_of_Cols = length(ColMEs),
+ Nbr_of_Cols = length(ColMEs),
MEs = ColMEs ++ (get(cdata))#cdata.mes,
- Aug = case lookup(SrcTableEntry,MEs) of
+ Aug = case lookup(SrcTableEntry, MEs) of
false ->
print_error("Cannot AUGMENT the non-existing table entry ~p",
- [SrcTableEntry],Line),
+ [SrcTableEntry], Line),
{augments, error};
- {value,ME} ->
- {augments, {SrcTableEntry,translate_type(ME#me.asn1_type)}}
+ {value, ME} ->
+ {augments, {SrcTableEntry, translate_type(ME#me.asn1_type)}}
end,
- #table_info{index_types = Aug};
-make_table_info(Line, TableName, {indexes,[]}, _ColumnMEs) ->
+ FirstNonIdxCol = augments_first_non_index_column(ColMEs),
+ NoAccs = list_not_accessible(FirstNonIdxCol, ColMEs),
+ FirstAcc = first_accessible(TableName, ColMEs),
+ #table_info{nbr_of_cols = Nbr_of_Cols,
+ first_accessible = FirstAcc,
+ not_accessible = NoAccs,
+ index_types = Aug};
+make_table_info(Line, TableName, {indexes, []}, _ColumnMEs) ->
print_error("Table ~w lacks indexes.", [TableName],Line),
#table_info{};
-make_table_info(Line, TableName, {indexes,Indexes}, ColumnMEs) ->
+make_table_info(Line, TableName, {indexes, Indexes}, ColumnMEs) ->
ColMEs = lists:keysort(#me.oid, ColumnMEs),
NonImpliedIndexes = lists:map(fun non_implied_name/1, Indexes),
test_read_create_access(ColMEs, Line, dummy),
@@ -860,11 +866,17 @@ get_asn1_type(ColumnName, MEs, Line) ->
end.
test_index_positions(Line, Indexes, ColMEs) ->
- TLI = lists:filter(fun (IndexName) ->
- is_table_local_index(IndexName,ColMEs) end,
- Indexes),
+ IsTLI = fun(IndexName) -> is_table_local_index(IndexName, ColMEs) end,
+ TLI = lists:filter(IsTLI, Indexes),
test_index_positions_impl(Line, TLI, ColMEs).
+%% An table that augments another cannot conatin any index,
+%% so the first non-index column is always the first column.
+augments_first_non_index_column([]) ->
+ none;
+augments_first_non_index_column([#me{oid=Col}|_ColMEs]) ->
+ Col.
+
%% Returns the first non-index column | none
test_index_positions_impl(_Line, [], []) -> none;
test_index_positions_impl(_Line, [], [#me{oid=Col}|_ColMEs]) ->
diff --git a/lib/snmp/src/manager/depend.mk b/lib/snmp/src/manager/depend.mk
index 0e7e9e3df7..2e7783c8ed 100644
--- a/lib/snmp/src/manager/depend.mk
+++ b/lib/snmp/src/manager/depend.mk
@@ -2,7 +2,7 @@
# %CopyrightBegin%
#
-# Copyright Ericsson AB 2004-2009. All Rights Reserved.
+# Copyright Ericsson AB 2004-2012. All Rights Reserved.
#
# The contents of this file are subject to the Erlang Public License,
# Version 1.1, (the "License"); you may not use this file except in
@@ -49,6 +49,13 @@ $(EBIN)/snmpm_net_if.$(EMULATOR): \
snmpm_net_if.erl \
snmpm_network_interface.erl
+$(EBIN)/snmpm_net_if_mt.$(EMULATOR): \
+ ../../include/snmp_types.hrl \
+ ../misc/snmp_debug.hrl \
+ ../misc/snmp_verbosity.hrl \
+ snmpm_net_if_mt.erl \
+ snmpm_network_interface.erl
+
$(EBIN)/snmpm_server.$(EMULATOR): \
../../include/snmp_types.hrl \
../../include/STANDARD-MIB.hrl \
diff --git a/lib/snmp/src/manager/modules.mk b/lib/snmp/src/manager/modules.mk
index 79f3dd65d9..d46545ea3f 100644
--- a/lib/snmp/src/manager/modules.mk
+++ b/lib/snmp/src/manager/modules.mk
@@ -2,7 +2,7 @@
# %CopyrightBegin%
#
-# Copyright Ericsson AB 2004-2009. All Rights Reserved.
+# Copyright Ericsson AB 2004-2012. All Rights Reserved.
#
# The contents of this file are subject to the Erlang Public License,
# Version 1.1, (the "License"); you may not use this file except in
@@ -31,6 +31,7 @@ MODULES = \
snmpm_mpd \
snmpm_misc_sup \
snmpm_net_if \
+ snmpm_net_if_mt \
snmpm_net_if_filter \
snmpm_server \
snmpm_server_sup \
diff --git a/lib/snmp/src/manager/snmpm.erl b/lib/snmp/src/manager/snmpm.erl
index 6d2ac8d747..89eaee9f80 100644
--- a/lib/snmp/src/manager/snmpm.erl
+++ b/lib/snmp/src/manager/snmpm.erl
@@ -1,7 +1,7 @@
%%
%% %CopyrightBegin%
%%
-%% Copyright Ericsson AB 2004-2011. All Rights Reserved.
+%% Copyright Ericsson AB 2004-2012. All Rights Reserved.
%%
%% The contents of this file are subject to the Erlang Public License,
%% Version 1.1, (the "License"); you may not use this file except in
@@ -75,8 +75,11 @@
%%
%% Logging
+ log_to_txt/1,
log_to_txt/2, log_to_txt/3, log_to_txt/4,
log_to_txt/5, log_to_txt/6, log_to_txt/7,
+ log_to_io/1, log_to_io/2, log_to_io/3,
+ log_to_io/4, log_to_io/5, log_to_io/6,
change_log_size/1,
get_log_type/0,
set_log_type/1,
@@ -1371,6 +1374,9 @@ cancel_async_request(UserId, ReqId) ->
%%%-----------------------------------------------------------------
%%% Audit Trail Log functions (for backward compatibility)
%%%-----------------------------------------------------------------
+
+log_to_txt(LogDir) ->
+ log_to_txt(LogDir, []).
log_to_txt(LogDir, Mibs) ->
OutFile = "snmpm_log.txt",
LogName = ?audit_trail_log_name,
@@ -1391,6 +1397,23 @@ log_to_txt(LogDir, Mibs, OutFile, LogName, LogFile, Start, Stop) ->
snmp:log_to_txt(LogDir, Mibs, OutFile, LogName, LogFile, Start, Stop).
+log_to_io(LogDir) ->
+ log_to_io(LogDir, []).
+log_to_io(LogDir, Mibs) ->
+ LogName = ?audit_trail_log_name,
+ LogFile = ?audit_trail_log_file,
+ snmp:log_to_io(LogDir, Mibs, LogName, LogFile).
+log_to_io(LogDir, Mibs, LogName) ->
+ LogFile = ?audit_trail_log_file,
+ snmp:log_to_io(LogDir, Mibs, LogName, LogFile).
+log_to_io(LogDir, Mibs, LogName, LogFile) ->
+ snmp:log_to_io(LogDir, Mibs, LogName, LogFile).
+log_to_io(LogDir, Mibs, LogName, LogFile, Start) ->
+ snmp:log_to_io(LogDir, Mibs, LogName, LogFile, Start).
+log_to_io(LogDir, Mibs, LogName, LogFile, Start, Stop) ->
+ snmp:log_to_io(LogDir, Mibs, LogFile, Start, Stop).
+
+
change_log_size(NewSize) ->
LogName = ?audit_trail_log_name,
snmp:change_log_size(LogName, NewSize).
diff --git a/lib/snmp/src/manager/snmpm_config.erl b/lib/snmp/src/manager/snmpm_config.erl
index c2e57abddb..5bbf9e5542 100644
--- a/lib/snmp/src/manager/snmpm_config.erl
+++ b/lib/snmp/src/manager/snmpm_config.erl
@@ -1,7 +1,7 @@
%%
%% %CopyrightBegin%
%%
-%% Copyright Ericsson AB 2004-2011. All Rights Reserved.
+%% Copyright Ericsson AB 2004-2012. All Rights Reserved.
%%
%% The contents of this file are subject to the Erlang Public License,
%% Version 1.1, (the "License"); you may not use this file except in
diff --git a/lib/snmp/src/manager/snmpm_mpd.erl b/lib/snmp/src/manager/snmpm_mpd.erl
index 103c87d32b..883224143e 100644
--- a/lib/snmp/src/manager/snmpm_mpd.erl
+++ b/lib/snmp/src/manager/snmpm_mpd.erl
@@ -110,9 +110,9 @@ process_msg(Msg, Domain, Addr, Port, State, NoteStore, Logger) ->
#message{version = 'version-2', vsn_hdr = Community, data = Data}
when State#state.v2c =:= true ->
HS = ?empty_msg_size + length(Community),
- (catch process_v1_v2c_msg('version-2', NoteStore, Msg,
- Domain, Addr, Port,
- Community, Data, HS, Logger));
+ process_v1_v2c_msg('version-2', NoteStore, Msg,
+ Domain, Addr, Port,
+ Community, Data, HS, Logger);
%% Version 3
#message{version = 'version-3', vsn_hdr = H, data = Data}
diff --git a/lib/snmp/src/manager/snmpm_net_if_mt.erl b/lib/snmp/src/manager/snmpm_net_if_mt.erl
new file mode 100644
index 0000000000..3e87f6a7fb
--- /dev/null
+++ b/lib/snmp/src/manager/snmpm_net_if_mt.erl
@@ -0,0 +1,1259 @@
+%%
+%% %CopyrightBegin%
+%%
+%% Copyright Ericsson AB 2004-2012. All Rights Reserved.
+%%
+%% The contents of this file are subject to the Erlang Public License,
+%% Version 1.1, (the "License"); you may not use this file except in
+%% compliance with the License. You should have received a copy of the
+%% Erlang Public License along with this software. If not, it can be
+%% retrieved online at http://www.erlang.org/.
+%%
+%% Software distributed under the License is distributed on an "AS IS"
+%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+%% the License for the specific language governing rights and limitations
+%% under the License.
+%%
+%% %CopyrightEnd%
+%%
+
+-module(snmpm_net_if_mt).
+
+-behaviour(gen_server).
+-behaviour(snmpm_network_interface).
+
+
+%% Network Interface callback functions
+-export([
+ start_link/2,
+ stop/1,
+ send_pdu/6, % Backward compatibillity
+ send_pdu/7, % Backward compatibillity
+ send_pdu/8,
+
+ inform_response/4,
+
+ note_store/2,
+
+ info/1,
+ verbosity/2,
+ %% system_info_updated/2,
+ get_log_type/1, set_log_type/2,
+ filter_reset/1
+ ]).
+
+%% gen_server callbacks
+-export([init/1, handle_call/3, handle_cast/2, handle_info/2,
+ code_change/3, terminate/2]).
+
+-define(SNMP_USE_V3, true).
+-include("snmp_types.hrl").
+-include("snmpm_internal.hrl").
+-include("snmpm_atl.hrl").
+-include("snmp_debug.hrl").
+
+%% -define(VMODULE,"NET_IF").
+-include("snmp_verbosity.hrl").
+
+-record(state,
+ {
+ server,
+ note_store,
+ sock,
+ mpd_state,
+ log,
+ irb = auto, % auto | {user, integer()}
+ irgc,
+ filter
+ }).
+
+
+-define(DEFAULT_FILTER_MODULE, snmpm_net_if_filter).
+-define(DEFAULT_FILTER_OPTS, [{module, ?DEFAULT_FILTER_MODULE}]).
+
+-ifdef(snmp_debug).
+-define(GS_START_LINK(Args),
+ gen_server:start_link(?MODULE, Args, [{debug,[trace]}])).
+-else.
+-define(GS_START_LINK(Args),
+ gen_server:start_link(?MODULE, Args, [])).
+-endif.
+
+
+-define(IRGC_TIMEOUT, timer:minutes(5)).
+
+-define(ATL_SEQNO_INITIAL, 1).
+-define(ATL_SEQNO_MAX, 2147483647).
+
+
+%%%-------------------------------------------------------------------
+%%% API
+%%%-------------------------------------------------------------------
+start_link(Server, NoteStore) ->
+ ?d("start_link -> entry with"
+ "~n Server: ~p"
+ "~n NoteStore: ~p", [Server, NoteStore]),
+ Args = [Server, NoteStore],
+ ?GS_START_LINK(Args).
+
+stop(Pid) ->
+ call(Pid, stop).
+
+send_pdu(Pid, Pdu, Vsn, MsgData, Addr, Port) ->
+ send_pdu(Pid, Pdu, Vsn, MsgData, Addr, Port, ?DEFAULT_EXTRA_INFO).
+
+send_pdu(Pid, Pdu, Vsn, MsgData, Addr, Port, ExtraInfo) ->
+ Domain = snmpm_config:default_transport_domain(),
+ send_pdu(Pid, Pdu, Vsn, MsgData, Domain, Addr, Port, ExtraInfo).
+
+send_pdu(Pid, Pdu, Vsn, MsgData, Domain, Addr, Port, ExtraInfo)
+ when is_record(Pdu, pdu) ->
+ ?d("send_pdu -> entry with"
+ "~n Pid: ~p"
+ "~n Pdu: ~p"
+ "~n Vsn: ~p"
+ "~n MsgData: ~p"
+ "~n Domain: ~p"
+ "~n Addr: ~p"
+ "~n Port: ~p", [Pid, Pdu, Vsn, MsgData, Domain, Addr, Port]),
+ cast(Pid, {send_pdu, Pdu, Vsn, MsgData, Domain, Addr, Port, ExtraInfo}).
+
+note_store(Pid, NoteStore) ->
+ call(Pid, {note_store, NoteStore}).
+
+inform_response(Pid, Ref, Addr, Port) ->
+ cast(Pid, {inform_response, Ref, Addr, Port}).
+
+info(Pid) ->
+ call(Pid, info).
+
+verbosity(Pid, V) ->
+ call(Pid, {verbosity, V}).
+
+%% system_info_updated(Pid, What) ->
+%% call(Pid, {system_info_updated, What}).
+
+get_log_type(Pid) ->
+ call(Pid, get_log_type).
+
+set_log_type(Pid, NewType) ->
+ call(Pid, {set_log_type, NewType}).
+
+filter_reset(Pid) ->
+ cast(Pid, filter_reset).
+
+
+%%%-------------------------------------------------------------------
+%%% Callback functions from gen_server
+%%%-------------------------------------------------------------------
+
+%%--------------------------------------------------------------------
+%% Func: init/1
+%% Returns: {ok, State} |
+%% {ok, State, Timeout} |
+%% ignore |
+%% {stop, Reason}
+%%--------------------------------------------------------------------
+init([Server, NoteStore]) ->
+ ?d("init -> entry with"
+ "~n Server: ~p"
+ "~n NoteStore: ~p", [Server, NoteStore]),
+ case (catch do_init(Server, NoteStore)) of
+ {error, Reason} ->
+ {stop, Reason};
+ {ok, State} ->
+ {ok, State}
+ end.
+
+do_init(Server, NoteStore) ->
+ process_flag(trap_exit, true),
+
+ %% -- Prio --
+ {ok, Prio} = snmpm_config:system_info(prio),
+ process_flag(priority, Prio),
+
+ %% -- Create inform request table --
+ %% This should really be protected, but it also needs to
+ %% be writable for the worker processes, so...
+ ets:new(snmpm_inform_request_table,
+ [set, public, named_table, {keypos, 1}]),
+
+ %% -- Verbosity --
+ {ok, Verbosity} = snmpm_config:system_info(net_if_verbosity),
+ put(sname, mnif),
+ put(verbosity, Verbosity),
+ ?vlog("starting", []),
+
+ %% -- MPD --
+ {ok, Vsns} = snmpm_config:system_info(versions),
+ MpdState = snmpm_mpd:init(Vsns),
+ ?vdebug("MpdState: ~w", [MpdState]),
+
+ %% -- Module dependent options --
+ {ok, Opts} = snmpm_config:system_info(net_if_options),
+
+ %% -- Inform response behaviour --
+ {ok, IRB} = snmpm_config:system_info(net_if_irb),
+ IrGcRef = irgc_start(IRB),
+
+ %% -- Socket --
+ SndBuf = get_opt(Opts, sndbuf, default),
+ RecBuf = get_opt(Opts, recbuf, default),
+ BindTo = get_opt(Opts, bind_to, false),
+ NoReuse = get_opt(Opts, no_reuse, false),
+ {ok, Port} = snmpm_config:system_info(port),
+ {ok, Sock} = do_open_port(Port, SndBuf, RecBuf, BindTo, NoReuse),
+
+ %% Flow control --
+ FilterOpts = get_opt(Opts, filter, []),
+ FilterMod = create_filter(FilterOpts),
+ ?vdebug("FilterMod: ~w", [FilterMod]),
+
+ %% -- Audit trail log ---
+ {ok, ATL} = snmpm_config:system_info(audit_trail_log),
+ Log = do_init_log(ATL),
+ ?vdebug("Log: ~w", [Log]),
+
+ %% -- Initiate counters ---
+ init_counters(),
+
+ %% -- We are done ---
+ State = #state{server = Server,
+ note_store = NoteStore,
+ mpd_state = MpdState,
+ sock = Sock,
+ log = Log,
+ irb = IRB,
+ irgc = IrGcRef,
+ filter = FilterMod},
+ ?vdebug("started", []),
+ {ok, State}.
+
+
+%% Open port
+do_open_port(Port, SendSz, RecvSz, BindTo, NoReuse) ->
+ ?vtrace("do_open_port -> entry with"
+ "~n Port: ~p"
+ "~n SendSz: ~p"
+ "~n RecvSz: ~p"
+ "~n BindTo: ~p"
+ "~n NoReuse: ~p", [Port, SendSz, RecvSz, BindTo, NoReuse]),
+ IpOpts1 = bind_to(BindTo),
+ IpOpts2 = no_reuse(NoReuse),
+ IpOpts3 = recbuf(RecvSz),
+ IpOpts4 = sndbuf(SendSz),
+ IpOpts = [binary | IpOpts1 ++ IpOpts2 ++ IpOpts3 ++ IpOpts4],
+ OpenRes =
+ case init:get_argument(snmpm_fd) of
+ {ok, [[FdStr]]} ->
+ Fd = list_to_integer(FdStr),
+ gen_udp:open(0, [{fd, Fd}|IpOpts]);
+ error ->
+ gen_udp:open(Port, IpOpts)
+ end,
+ case OpenRes of
+ {error, _} = Error ->
+ throw(Error);
+ OK ->
+ OK
+ end.
+
+bind_to(true) ->
+ case snmpm_config:system_info(address) of
+ {ok, Addr} when is_list(Addr) ->
+ [{ip, list_to_tuple(Addr)}];
+ {ok, Addr} ->
+ [{ip, Addr}];
+ _ ->
+ []
+ end;
+bind_to(_) ->
+ [].
+
+no_reuse(false) ->
+ [{reuseaddr, true}];
+no_reuse(_) ->
+ [].
+
+recbuf(default) ->
+ [];
+recbuf(Sz) ->
+ [{recbuf, Sz}].
+
+sndbuf(default) ->
+ [];
+sndbuf(Sz) ->
+ [{sndbuf, Sz}].
+
+
+create_filter(Opts) when is_list(Opts) ->
+ case get_opt(Opts, module, ?DEFAULT_FILTER_MODULE) of
+ ?DEFAULT_FILTER_MODULE = Mod ->
+ Mod;
+ Module ->
+ snmpm_network_interface_filter:verify(Module),
+ Module
+ end;
+create_filter(BadOpts) ->
+ throw({error, {bad_filter_opts, BadOpts}}).
+
+
+%% ----------------------------------------------------------------------
+%% Audit Trail Logger
+%% ----------------------------------------------------------------------
+
+%% Open log
+do_init_log(false) ->
+ ?vtrace("do_init_log(false) -> entry", []),
+ undefined;
+do_init_log(true) ->
+ ?vtrace("do_init_log(true) -> entry", []),
+ {ok, Type} = snmpm_config:system_info(audit_trail_log_type),
+ {ok, Dir} = snmpm_config:system_info(audit_trail_log_dir),
+ {ok, Size} = snmpm_config:system_info(audit_trail_log_size),
+ {ok, Repair} = snmpm_config:system_info(audit_trail_log_repair),
+ Name = ?audit_trail_log_name,
+ File = filename:absname(?audit_trail_log_file, Dir),
+ case snmpm_config:system_info(audit_trail_log_seqno) of
+ {ok, true} ->
+ Initial = ?ATL_SEQNO_INITIAL,
+ Max = ?ATL_SEQNO_MAX,
+ Module = snmpm_config,
+ Function = increment_counter,
+ Args = [atl_seqno, Initial, Max],
+ SeqNoGen = {Module, Function, Args},
+ case snmp_log:create(Name, File, SeqNoGen, Size, Repair, true) of
+ {ok, Log} ->
+ ?vdebug("log created: ~w", [Log]),
+ {Name, Log, Type};
+ {error, Reason} ->
+ throw({error, {failed_create_audit_log, Reason}})
+ end;
+ _ ->
+ case snmp_log:create(Name, File, Size, Repair, true) of
+ {ok, Log} ->
+ ?vdebug("log created: ~w", [Log]),
+ {Name, Log, Type};
+ {error, Reason} ->
+ throw({error, {failed_create_audit_log, Reason}})
+ end
+ end.
+
+
+%% ----------------------------------------------------------------------
+
+%%--------------------------------------------------------------------
+%% Func: handle_call/3
+%% Returns: {reply, Reply, State} |
+%% {reply, Reply, State, Timeout} |
+%% {noreply, State} |
+%% {noreply, State, Timeout} |
+%% {stop, Reason, Reply, State} | (terminate/2 is called)
+%% {stop, Reason, State} (terminate/2 is called)
+%%--------------------------------------------------------------------
+handle_call({verbosity, Verbosity}, _From, State) ->
+ ?vlog("received verbosity request", []),
+ put(verbosity, Verbosity),
+ {reply, ok, State};
+
+%% handle_call({system_info_updated, What}, _From, State) ->
+%% ?vlog("received system_info_updated request with What = ~p", [What]),
+%% {NewState, Reply} = handle_system_info_updated(State, What),
+%% {reply, Reply, NewState};
+
+handle_call(get_log_type, _From, State) ->
+ ?vlog("received get-log-type request", []),
+ Reply = (catch handle_get_log_type(State)),
+ {reply, Reply, State};
+
+handle_call({set_log_type, NewType}, _From, State) ->
+ ?vlog("received set-log-type request with NewType = ~p", [NewType]),
+ {NewState, Reply} = (catch handle_set_log_type(State, NewType)),
+ {reply, Reply, NewState};
+
+handle_call({note_store, Pid}, _From, State) ->
+ ?vlog("received new note_store: ~w", [Pid]),
+ {reply, ok, State#state{note_store = Pid}};
+
+handle_call(stop, _From, State) ->
+ ?vlog("received stop request", []),
+ Reply = ok,
+ {stop, normal, Reply, State};
+
+handle_call(info, _From, State) ->
+ ?vlog("received info request", []),
+ Reply = get_info(State),
+ {reply, Reply, State};
+
+handle_call(Req, From, State) ->
+ warning_msg("received unknown request (from ~p): ~n~p", [Req, From]),
+ {reply, {error, {invalid_request, Req}}, State}.
+
+
+%%--------------------------------------------------------------------
+%% Func: handle_cast/2
+%% Returns: {noreply, State} |
+%% {noreply, State, Timeout} |
+%% {stop, Reason, State} (terminate/2 is called)
+%%--------------------------------------------------------------------
+handle_cast({send_pdu, Pdu, Vsn, MsgData, Domain, Addr, Port, ExtraInfo},
+ State) ->
+ ?vlog("received send_pdu message with"
+ "~n Pdu: ~p"
+ "~n Vsn: ~p"
+ "~n MsgData: ~p"
+ "~n Domain: ~p"
+ "~n Addr: ~p"
+ "~n Port: ~p", [Pdu, Vsn, MsgData, Domain, Addr, Port]),
+ maybe_process_extra_info(ExtraInfo),
+ handle_send_pdu(Pdu, Vsn, MsgData, Domain, Addr, Port, State),
+ {noreply, State};
+
+handle_cast({inform_response, Ref, Addr, Port}, State) ->
+ ?vlog("received inform_response message with"
+ "~n Ref: ~p"
+ "~n Addr: ~p"
+ "~n Port: ~p", [Ref, Addr, Port]),
+ handle_inform_response(Ref, Addr, Port, State),
+ {noreply, State};
+
+handle_cast(filter_reset, State) ->
+ ?vlog("received filter_reset message", []),
+ reset_counters(),
+ {noreply, State};
+
+handle_cast(Msg, State) ->
+ warning_msg("received unknown message: ~n~p", [Msg]),
+ {noreply, State}.
+
+
+%%--------------------------------------------------------------------
+%% Func: handle_info/2
+%% Returns: {noreply, State} |
+%% {noreply, State, Timeout} |
+%% {stop, Reason, State} (terminate/2 is called)
+%%--------------------------------------------------------------------
+handle_info({udp, Sock, Ip, Port, Bytes}, #state{sock = Sock} = State) ->
+ ?vlog("received ~w bytes from ~p:~p", [size(Bytes), Ip, Port]),
+ handle_udp(Ip, Port, Bytes, State),
+ {noreply, State};
+
+handle_info(inform_response_gc, State) ->
+ ?vlog("received inform_response_gc message", []),
+ State2 = handle_inform_response_gc(State),
+ {noreply, State2};
+
+handle_info({disk_log, _Node, Log, Info}, State) ->
+ ?vlog("received disk_log message: "
+ "~n Info: ~p", [Info]),
+ State2 = handle_disk_log(Log, Info, State),
+ {noreply, State2};
+
+handle_info({'DOWN', _MRef, process, Pid, {net_if_worker, ExitStatus}},
+ State) ->
+ ?vdebug("received DOWN message from net_if-worker: "
+ "~n ExitStatus: ~p", [ExitStatus]),
+ handle_worker_exit(Pid, ExitStatus),
+ {noreply, State};
+
+handle_info(Info, State) ->
+ warning_msg("received unknown info: ~n~p", [Info]),
+ {noreply, State}.
+
+
+%%--------------------------------------------------------------------
+%% Func: terminate/2
+%% Purpose: Shutdown the server
+%% Returns: any (ignored by gen_server)
+%%--------------------------------------------------------------------
+terminate(Reason, #state{log = Log, irgc = IrGcRef}) ->
+ ?vdebug("terminate: ~p", [Reason]),
+ irgc_stop(IrGcRef),
+ %% Close logs
+ do_close_log(Log),
+ ok.
+
+
+do_close_log({Log, _Type}) ->
+ (catch snmp_log:sync(Log)),
+ (catch snmp_log:close(Log)),
+ ok;
+do_close_log(_) ->
+ ok.
+
+
+%%----------------------------------------------------------------------
+%% Func: code_change/3
+%% Purpose: Convert process state when code is changed
+%% Returns: {ok, NewState}
+%%----------------------------------------------------------------------
+
+code_change(_Vsn, State, _Extra) ->
+ ?d("code_change -> entry with"
+ "~n Vsn: ~p"
+ "~n State: ~p"
+ "~n Extra: ~p", [_Vsn, State, _Extra]),
+ {ok, State}.
+
+
+%%%-------------------------------------------------------------------
+%%% Internal functions
+%%%-------------------------------------------------------------------
+
+handle_udp(Addr, Port, Bytes, State) ->
+ Verbosity = get(verbosity),
+ spawn_opt(fun() ->
+ Log = worker_init(State, Verbosity),
+ Res = (catch maybe_handle_recv_msg(
+ Addr, Port, Bytes,
+ State#state{log = Log})),
+ worker_exit(udp, {Addr, Port}, Res)
+ end,
+ [monitor]).
+
+
+maybe_handle_recv_msg(Addr, Port, Bytes, #state{filter = FilterMod} = State) ->
+ case (catch FilterMod:accept_recv(Addr, Port)) of
+ false ->
+ %% Drop the received packet
+ inc(netIfMsgInDrops),
+ ok;
+ _ ->
+ handle_recv_msg(Addr, Port, Bytes, State)
+ end.
+
+
+handle_recv_msg(Addr, Port, Bytes, #state{server = Pid})
+ when is_binary(Bytes) andalso (size(Bytes) =:= 0) ->
+ Pid ! {snmp_error, {empty_message, Addr, Port}, Addr, Port},
+ ok;
+
+handle_recv_msg(Addr, Port, Bytes,
+ #state{server = Pid,
+ note_store = NoteStore,
+ mpd_state = MpdState,
+ sock = Sock,
+ log = Log} = State) ->
+ Domain = snmp_conf:which_domain(Addr), % What the ****...
+ Logger = logger(Log, read, Addr, Port),
+ case (catch snmpm_mpd:process_msg(Bytes, Domain, Addr, Port,
+ MpdState, NoteStore, Logger)) of
+
+ {ok, Vsn, Pdu, MS, ACM} ->
+ maybe_handle_recv_pdu(Addr, Port, Vsn, Pdu, MS, ACM,
+ Logger, State);
+
+ {discarded, Reason, Report} ->
+ ?vdebug("discarded: ~p", [Reason]),
+ ErrorInfo = {failed_processing_message, Reason},
+ Pid ! {snmp_error, ErrorInfo, Addr, Port},
+ maybe_udp_send(State#state.filter, Sock, Addr, Port, Report),
+ ok;
+
+ {discarded, Reason} ->
+ ?vdebug("discarded: ~p", [Reason]),
+ ErrorInfo = {failed_processing_message, Reason},
+ Pid ! {snmp_error, ErrorInfo, Addr, Port},
+ ok;
+
+ Error ->
+ error_msg("processing of received message failed: "
+ "~n ~p", [Error]),
+ ok
+ end.
+
+
+maybe_handle_recv_pdu(Addr, Port,
+ Vsn, #pdu{type = Type} = Pdu, PduMS, ACM,
+ Logger,
+ #state{filter = FilterMod} = State) ->
+ case (catch FilterMod:accept_recv_pdu(Addr, Port, Type)) of
+ false ->
+ inc(netIfPduInDrops),
+ ok;
+ _ ->
+ handle_recv_pdu(Addr, Port, Vsn, Pdu, PduMS, ACM, Logger, State)
+ end;
+maybe_handle_recv_pdu(Addr, Port, Vsn, Trap, PduMS, ACM, Logger,
+ #state{filter = FilterMod} = State)
+ when is_record(Trap, trappdu) ->
+ case (catch FilterMod:accept_recv_pdu(Addr, Port, trappdu)) of
+ false ->
+ inc(netIfPduInDrops),
+ ok;
+ _ ->
+ handle_recv_pdu(Addr, Port, Vsn, Trap, PduMS, ACM, Logger, State)
+ end;
+maybe_handle_recv_pdu(Addr, Port, Vsn, Pdu, PduMS, ACM, Logger, State) ->
+ handle_recv_pdu(Addr, Port, Vsn, Pdu, PduMS, ACM, Logger, State).
+
+
+handle_recv_pdu(Addr, Port,
+ Vsn, #pdu{type = 'inform-request'} = Pdu, _PduMS, ACM,
+ Logger, #state{server = Pid, irb = IRB} = State) ->
+ handle_inform_request(IRB, Pid, Vsn, Pdu, ACM,
+ Addr, Port, Logger, State);
+handle_recv_pdu(Addr, Port,
+ _Vsn, #pdu{type = report} = Pdu, _PduMS, ok,
+ _Logger,
+ #state{server = Pid} = _State) ->
+ ?vtrace("received report - ok", []),
+ Pid ! {snmp_report, {ok, Pdu}, Addr, Port},
+ ok;
+handle_recv_pdu(Addr, Port,
+ _Vsn, #pdu{type = report} = Pdu, _PduMS,
+ {error, ReqId, Reason},
+ _Logger,
+ #state{server = Pid} = _State) ->
+ ?vtrace("received report - error", []),
+ Pid ! {snmp_report, {error, ReqId, Reason, Pdu}, Addr, Port},
+ ok;
+handle_recv_pdu(Addr, Port,
+ _Vsn, #pdu{type = 'snmpv2-trap'} = Pdu, _PduMS, _ACM,
+ _Logger,
+ #state{server = Pid} = _State) ->
+ ?vtrace("received snmpv2-trap", []),
+ Pid ! {snmp_trap, Pdu, Addr, Port},
+ ok;
+handle_recv_pdu(Addr, Port,
+ _Vsn, Trap, _PduMS, _ACM,
+ _Logger,
+ #state{server = Pid} = _State) when is_record(Trap, trappdu) ->
+ ?vtrace("received trappdu", []),
+ Pid ! {snmp_trap, Trap, Addr, Port},
+ ok;
+handle_recv_pdu(Addr, Port,
+ _Vsn, Pdu, _PduMS, _ACM,
+ _Logger,
+ #state{server = Pid} = _State) when is_record(Pdu, pdu) ->
+ ?vtrace("received pdu", []),
+ Pid ! {snmp_pdu, Pdu, Addr, Port},
+ ok;
+handle_recv_pdu(_Addr, _Port, _Vsn, Pdu, _PduMS, ACM, _Logger, _State) ->
+ ?vlog("received unexpected pdu: "
+ "~n Pdu: ~p"
+ "~n ACM: ~p", [Pdu, ACM]),
+ ok.
+
+
+handle_inform_request(auto, Pid, Vsn, Pdu, ACM, Addr, Port, Logger, State) ->
+ ?vtrace("received inform-request (true)", []),
+ Pid ! {snmp_inform, ignore, Pdu, Addr, Port},
+ RePdu = make_response_pdu(Pdu),
+ maybe_send_inform_response(RePdu, Vsn, ACM, Addr, Port, Logger, State);
+handle_inform_request({user, To}, Pid, Vsn, #pdu{request_id = ReqId} = Pdu,
+ ACM, Addr, Port, _Logger, _State) ->
+ ?vtrace("received inform-request (false)", []),
+
+ Pid ! {snmp_inform, ReqId, Pdu, Addr, Port},
+
+ %% Before we go any further, we need to check that we have not
+ %% already received this message (possible resend).
+
+ Key = {ReqId, Addr, Port},
+ case ets:lookup(snmpm_inform_request_table, Key) of
+ [_] ->
+ %% OK, we already know about this. We assume this
+ %% is a resend. Either the agent is really eager or
+ %% the user has not answered yet. Bad user!
+ ok;
+ [] ->
+ RePdu = make_response_pdu(Pdu),
+ Expire = t() + To,
+ Rec = {Key, Expire, {Vsn, ACM, RePdu}},
+ ets:insert(snmpm_inform_request_table, Rec)
+ end,
+ ok.
+
+handle_inform_response(Ref, Addr, Port, State) ->
+ Verbosity = get(verbosity),
+ spawn_opt(fun() ->
+ Log = worker_init(State, Verbosity),
+ Res = (catch do_handle_inform_response(
+ Ref,
+ Addr, Port,
+ State#state{log = Log})),
+ worker_exit(inform_reponse, {Addr, Port}, Res)
+ end,
+ [monitor]).
+
+
+
+do_handle_inform_response(Ref, Addr, Port, State) ->
+ Key = {Ref, Addr, Port},
+ case ets:lookup(snmpm_inform_request_table, Key) of
+ [{Key, _, {Vsn, ACM, RePdu}}] ->
+ Logger = logger(State#state.log, read, Addr, Port),
+ ets:delete(snmpm_inform_request_table, Key),
+ maybe_send_inform_response(RePdu, Vsn, ACM, Addr, Port,
+ Logger, State);
+ [] ->
+ %% Already acknowledged, or the user was to slow to reply...
+ ok
+ end,
+ ok.
+
+maybe_send_inform_response(RePdu, Vsn, ACM, Addr, Port, Logger,
+ #state{server = Pid,
+ sock = Sock,
+ filter = FilterMod}) ->
+ case (catch FilterMod:accept_send_pdu(Addr, Port, pdu_type_of(RePdu))) of
+ false ->
+ inc(netIfPduOutDrops),
+ ok;
+ _ ->
+ case snmpm_mpd:generate_response_msg(Vsn, RePdu, ACM, Logger) of
+ {ok, Msg} ->
+ maybe_udp_send(FilterMod, Sock, Addr, Port, Msg);
+ {discarded, Reason} ->
+ ?vlog("failed generating response message:"
+ "~n Reason: ~p", [Reason]),
+ ReqId = RePdu#pdu.request_id,
+ ErrorInfo = {failed_generating_response, {RePdu, Reason}},
+ Pid ! {snmp_error, ReqId, ErrorInfo, Addr, Port},
+ ok
+ end
+ end.
+
+handle_inform_response_gc(#state{irb = IRB} = State) ->
+ ets:safe_fixtable(snmpm_inform_request_table, true),
+ do_irgc(ets:first(snmpm_inform_request_table), t()),
+ ets:safe_fixtable(snmpm_inform_request_table, false),
+ State#state{irgc = irgc_start(IRB)}.
+
+%% We are deleting at the same time as we are traversing the table!!!
+do_irgc('$end_of_table', _) ->
+ ok;
+do_irgc(Key, Now) ->
+ Next = ets:next(snmpm_inform_request_table, Key),
+ case ets:lookup(snmpm_inform_request_table, Key) of
+ [{Key, BestBefore, _}] when BestBefore < Now ->
+ ets:delete(snmpm_inform_request_table, Key);
+ _ ->
+ ok
+ end,
+ do_irgc(Next, Now).
+
+irgc_start(auto) ->
+ undefined;
+irgc_start(_) ->
+ erlang:send_after(?IRGC_TIMEOUT, self(), inform_response_gc).
+
+irgc_stop(undefined) ->
+ ok;
+irgc_stop(Ref) ->
+ (catch erlang:cancel_timer(Ref)).
+
+
+handle_send_pdu(Pdu, Vsn, MsgData, Domain, Addr, Port, State) ->
+ Verbosity = get(verbosity),
+ spawn_opt(fun() ->
+ Log = worker_init(State, Verbosity),
+ Res = (catch maybe_handle_send_pdu(
+ Pdu, Vsn, MsgData,
+ Domain, Addr, Port,
+ State#state{log = Log})),
+ worker_exit(send_pdu, {Domain, Addr, Port}, Res)
+ end,
+ [monitor]).
+
+maybe_handle_send_pdu(Pdu, Vsn, MsgData, Domain, Addr, Port,
+ #state{filter = FilterMod} = State) ->
+ case (catch FilterMod:accept_send_pdu(Addr, Port, pdu_type_of(Pdu))) of
+ false ->
+ inc(netIfPduOutDrops),
+ ok;
+ _ ->
+ do_handle_send_pdu(Pdu, Vsn, MsgData, Domain, Addr, Port, State)
+ end.
+
+do_handle_send_pdu(Pdu, Vsn, MsgData, _Domain, Addr, Port,
+ #state{server = Pid,
+ note_store = NoteStore,
+ sock = Sock,
+ log = Log,
+ filter = FilterMod}) ->
+ Logger = logger(Log, write, Addr, Port),
+ case (catch snmpm_mpd:generate_msg(Vsn, NoteStore,
+ Pdu, MsgData, Logger)) of
+ {ok, Msg} ->
+ ?vtrace("do_handle_send_pdu -> message generated", []),
+ maybe_udp_send(FilterMod, Sock, Addr, Port, Msg);
+ {discarded, Reason} ->
+ ?vlog("PDU not sent: "
+ "~n PDU: ~p"
+ "~n Reason: ~p", [Pdu, Reason]),
+ Pid ! {snmp_error, Pdu, Reason},
+ ok
+ end.
+
+
+maybe_udp_send(FilterMod, Sock, Addr, Port, Msg) ->
+ case (catch FilterMod:accept_send(Addr, Port)) of
+ false ->
+ inc(netIfMsgOutDrops),
+ ok;
+ _ ->
+ udp_send(Sock, Addr, Port, Msg)
+ end.
+
+
+udp_send(Sock, Addr, Port, Msg) ->
+ case (catch gen_udp:send(Sock, Addr, Port, Msg)) of
+ ok ->
+ ?vdebug("sent ~w bytes to ~w:~w [~w]",
+ [sz(Msg), Addr, Port, Sock]),
+ ok;
+ {error, Reason} ->
+ error_msg("failed sending message to ~p:~p: "
+ "~n ~p",[Addr, Port, Reason]),
+ ok;
+ Error ->
+ error_msg("failed sending message to ~p:~p: "
+ "~n ~p",[Addr, Port, Error]),
+ ok
+ end.
+
+sz(B) when is_binary(B) ->
+ size(B);
+sz(L) when is_list(L) ->
+ length(L);
+sz(_) ->
+ undefined.
+
+
+handle_disk_log(_Log, {wrap, NoLostItems}, State) ->
+ ?vlog("Audit Trail Log - wrapped: ~w previously logged items where lost",
+ [NoLostItems]),
+ State;
+handle_disk_log(_Log, {truncated, NoLostItems}, State) ->
+ ?vlog("Audit Trail Log - truncated: ~w items where lost when truncating",
+ [NoLostItems]),
+ State;
+handle_disk_log(_Log, full, State) ->
+ error_msg("Failed to write to Audit Trail Log (full)", []),
+ State;
+handle_disk_log(_Log, {error_status, ok}, State) ->
+ State;
+handle_disk_log(_Log, {error_status, {error, Reason}}, State) ->
+ error_msg("Error status received from Audit Trail Log: "
+ "~n~p", [Reason]),
+ State;
+handle_disk_log(_Log, _Info, State) ->
+ State.
+
+
+%% mk_discovery_msg('version-3', Pdu, _VsnHdr, UserName) ->
+%% ScopedPDU = #scopedPdu{contextEngineID = "",
+%% contextName = "",
+%% data = Pdu},
+%% Bytes = snmp_pdus:enc_scoped_pdu(ScopedPDU),
+%% MsgID = get(msg_id),
+%% put(msg_id,MsgID+1),
+%% UsmSecParams =
+%% #usmSecurityParameters{msgAuthoritativeEngineID = "",
+%% msgAuthoritativeEngineBoots = 0,
+%% msgAuthoritativeEngineTime = 0,
+%% msgUserName = UserName,
+%% msgPrivacyParameters = "",
+%% msgAuthenticationParameters = ""},
+%% SecBytes = snmp_pdus:enc_usm_security_parameters(UsmSecParams),
+%% PduType = Pdu#pdu.type,
+%% Hdr = #v3_hdr{msgID = MsgID,
+%% msgMaxSize = 1000,
+%% msgFlags = snmp_misc:mk_msg_flags(PduType, 0),
+%% msgSecurityModel = ?SEC_USM,
+%% msgSecurityParameters = SecBytes},
+%% Msg = #message{version = 'version-3', vsn_hdr = Hdr, data = Bytes},
+%% case (catch snmp_pdus:enc_message_only(Msg)) of
+%% {'EXIT', Reason} ->
+%% error("Encoding error. Pdu: ~w. Reason: ~w",[Pdu, Reason]),
+%% error;
+%% L when list(L) ->
+%% {Msg, L}
+%% end;
+%% mk_discovery_msg(Version, Pdu, {Com, _, _, _, _}, UserName) ->
+%% Msg = #message{version = Version, vsn_hdr = Com, data = Pdu},
+%% case catch snmp_pdus:enc_message(Msg) of
+%% {'EXIT', Reason} ->
+%% error("Encoding error. Pdu: ~w. Reason: ~w",[Pdu, Reason]),
+%% error;
+%% L when list(L) ->
+%% {Msg, L}
+%% end.
+
+
+%% mk_msg('version-3', Pdu, {Context, User, EngineID, CtxEngineId, SecLevel},
+%% MsgData) ->
+%% %% Code copied from snmp_mpd.erl
+%% {MsgId, SecName, SecData} =
+%% if
+%% tuple(MsgData), Pdu#pdu.type == 'get-response' ->
+%% MsgData;
+%% true ->
+%% Md = get(msg_id),
+%% put(msg_id, Md + 1),
+%% {Md, User, []}
+%% end,
+%% ScopedPDU = #scopedPdu{contextEngineID = CtxEngineId,
+%% contextName = Context,
+%% data = Pdu},
+%% ScopedPDUBytes = snmp_pdus:enc_scoped_pdu(ScopedPDU),
+
+%% PduType = Pdu#pdu.type,
+%% V3Hdr = #v3_hdr{msgID = MsgId,
+%% msgMaxSize = 1000,
+%% msgFlags = snmp_misc:mk_msg_flags(PduType, SecLevel),
+%% msgSecurityModel = ?SEC_USM},
+%% Message = #message{version = 'version-3', vsn_hdr = V3Hdr,
+%% data = ScopedPDUBytes},
+%% SecEngineID = case PduType of
+%% 'get-response' -> snmp_framework_mib:get_engine_id();
+%% _ -> EngineID
+%% end,
+%% case catch snmp_usm:generate_outgoing_msg(Message, SecEngineID,
+%% SecName, SecData, SecLevel) of
+%% {'EXIT', Reason} ->
+%% error("Encoding error. Pdu: ~w. Reason: ~w",[Pdu, Reason]),
+%% error;
+%% {error, Reason} ->
+%% error("Encoding error. Pdu: ~w. Reason: ~w",[Pdu, Reason]),
+%% error;
+%% Packet ->
+%% Packet
+%% end;
+%% mk_msg(Version, Pdu, {Com, _User, _EngineID, _Ctx, _SecLevel}, _SecData) ->
+%% Msg = #message{version = Version, vsn_hdr = Com, data = Pdu},
+%% case catch snmp_pdus:enc_message(Msg) of
+%% {'EXIT', Reason} ->
+%% error("Encoding error. Pdu: ~w. Reason: ~w",[Pdu, Reason]),
+%% error;
+%% B when list(B) ->
+%% B
+%% end.
+
+
+%% handle_system_info_updated(#state{log = {Log, _OldType}} = State,
+%% audit_trail_log_type = _What) ->
+%% %% Just to make sure, check that ATL is actually enabled
+%% case snmpm_config:system_info(audit_trail_log) of
+%% {ok, true} ->
+%% {ok, Type} = snmpm_config:system_info(audit_trail_log_type),
+%% NewState = State#state{log = {Log, Type}},
+%% {NewState, ok};
+%% _ ->
+%% {State, {error, {adt_not_enabled}}}
+%% end;
+%% handle_system_info_updated(_State, _What) ->
+%% ok.
+
+handle_get_log_type(#state{log = {_Log, Value}} = State) ->
+ %% Just to make sure, check that ATL is actually enabled
+ case snmpm_config:system_info(audit_trail_log) of
+ {ok, true} ->
+ Type =
+ case {lists:member(read, Value), lists:member(write, Value)} of
+ {true, true} ->
+ read_write;
+ {true, false} ->
+ read;
+ {false, true} ->
+ write;
+ {false, false} ->
+ throw({State, {error, {bad_atl_type, Value}}})
+ end,
+ {ok, Type};
+ _ ->
+ {error, not_enabled}
+ end;
+handle_get_log_type(_State) ->
+ {error, not_enabled}.
+
+handle_set_log_type(#state{log = {Log, OldValue}} = State, NewType) ->
+ %% Just to make sure, check that ATL is actually enabled
+ case snmpm_config:system_info(audit_trail_log) of
+ {ok, true} ->
+ NewValue =
+ case NewType of
+ read ->
+ [read];
+ write ->
+ [write];
+ read_write ->
+ [read,write];
+ _ ->
+ throw({State, {error, {bad_atl_type, NewType}}})
+ end,
+ NewState = State#state{log = {Log, NewValue}},
+ OldType =
+ case {lists:member(read, OldValue),
+ lists:member(write, OldValue)} of
+ {true, true} ->
+ read_write;
+ {true, false} ->
+ read;
+ {false, true} ->
+ write;
+ {false, false} ->
+ throw({State, {error, {bad_atl_type, OldValue}}})
+ end,
+ {NewState, {ok, OldType}};
+ _ ->
+ {State, {error, not_enabled}}
+ end;
+handle_set_log_type(State, _NewType) ->
+ {State, {error, not_enabled}}.
+
+
+%% -------------------------------------------------------------------
+
+worker_init(#state{log = undefined = Log}, Verbosity) ->
+ worker_init2(Log, Verbosity);
+worker_init(#state{log = {Name, Log, Type}}, Verbosity) ->
+ case snmp_log:open(Name, Log) of
+ {ok, NewLog} ->
+ worker_init2({Name, NewLog, Type}, Verbosity);
+ {error, Reason} ->
+ warning_msg("NetIf worker ~p failed opening ATL: "
+ "~n ~p", [self(), Reason]),
+ NewLog = undefined,
+ worker_init2({Name, NewLog, Type}, Verbosity)
+ end;
+worker_init(State, Verbosity) ->
+ ?vinfo("worker_init -> entry with invalid data: "
+ "~n State: ~p"
+ "~n Verbosity: ~p", [State, Verbosity]),
+ exit({worker_init, State, Verbosity}).
+
+worker_init2(Log, Verbosity) ->
+ put(sname, mnifw),
+ put(verbosity, Verbosity),
+ Log.
+
+
+worker_exit(Tag, Info, Result) ->
+ exit({net_if_worker, {Tag, Info, Result}}).
+
+handle_worker_exit(_, {_, _, ok}) ->
+ ok;
+handle_worker_exit(Pid, {udp, {Addr, Port}, ExitStatus}) ->
+ warning_msg("Worker process (~p) terminated "
+ "while processing (incomming) message from ~w:~w: "
+ "~n~p", [Pid, Addr, Port, ExitStatus]),
+ ok;
+handle_worker_exit(Pid, {send_pdu, {Domain, Addr, Port}, ExitStatus}) ->
+ warning_msg("Worker process (~p) terminated "
+ "while processing (outgoing) pdu for [~w] ~w:~w: "
+ "~n~p", [Pid, Domain, Addr, Port, ExitStatus]),
+ ok;
+handle_worker_exit(Pid, {inform_response, {Addr, Port}, ExitStatus}) ->
+ warning_msg("Worker process (~p) terminated "
+ "while processing (outgoing) inform response for ~w:~w: "
+ "~n~p", [Pid, Addr, Port, ExitStatus]),
+ ok;
+handle_worker_exit(_, _) ->
+ ok.
+
+
+%% -------------------------------------------------------------------
+
+make_response_pdu(#pdu{request_id = ReqId, varbinds = Vbs}) ->
+ #pdu{type = 'get-response',
+ request_id = ReqId,
+ error_status = noError,
+ error_index = 0,
+ varbinds = Vbs}.
+
+
+%% ----------------------------------------------------------------
+
+pdu_type_of(#pdu{type = Type}) ->
+ Type;
+pdu_type_of(TrapPdu) when is_record(TrapPdu, trappdu) ->
+ trap.
+
+
+%% -------------------------------------------------------------------
+
+%% At this point this function is used during testing
+maybe_process_extra_info(?DEFAULT_EXTRA_INFO) ->
+ ok;
+maybe_process_extra_info({?SNMPM_EXTRA_INFO_TAG, Fun})
+ when is_function(Fun, 0) ->
+ (catch Fun()),
+ ok;
+maybe_process_extra_info(_ExtraInfo) ->
+ ok.
+
+
+%% -------------------------------------------------------------------
+
+t() ->
+ {A,B,C} = erlang:now(),
+ A*1000000000+B*1000+(C div 1000).
+
+
+%% -------------------------------------------------------------------
+
+logger(undefined, _Type, _Addr, _Port) ->
+ fun(_) ->
+ ok
+ end;
+logger({_Name, Log, Types}, Type, Addr, Port) ->
+ case lists:member(Type, Types) of
+ true ->
+ fun(Msg) ->
+ snmp_log:log(Log, Msg, Addr, Port)
+ end;
+ false ->
+ fun(_) ->
+ ok
+ end
+ end.
+
+
+%% -------------------------------------------------------------------
+
+%% info_msg(F, A) ->
+%% ?snmpm_info("NET-IF server: " ++ F, A).
+
+warning_msg(F, A) ->
+ ?snmpm_warning("NET-IF server: " ++ F, A).
+
+error_msg(F, A) ->
+ ?snmpm_error("NET-IF server: " ++ F, A).
+
+
+
+%%%-------------------------------------------------------------------
+
+% get_opt(Key, Opts) ->
+% ?vtrace("get option ~w", [Key]),
+% snmp_misc:get_option(Key, Opts).
+
+get_opt(Opts, Key, Def) ->
+ ?vtrace("get option ~w with default ~p", [Key, Def]),
+ snmp_misc:get_option(Key, Opts, Def).
+
+
+%% -------------------------------------------------------------------
+
+get_info(#state{sock = Id}) ->
+ ProcSize = proc_mem(self()),
+ PortInfo = get_port_info(Id),
+ [{process_memory, ProcSize}, {port_info, PortInfo}].
+
+proc_mem(P) when is_pid(P) ->
+ case (catch erlang:process_info(P, memory)) of
+ {memory, Sz} when is_integer(Sz) ->
+ Sz;
+ _ ->
+ undefined
+ end.
+%% proc_mem(_) ->
+%% undefined.
+
+
+get_port_info(Id) ->
+ PortInfo =
+ case (catch erlang:port_info(Id)) of
+ PI when is_list(PI) ->
+ [{port_info, PI}];
+ _ ->
+ []
+ end,
+ PortStatus =
+ case (catch prim_inet:getstatus(Id)) of
+ {ok, PS} ->
+ [{port_status, PS}];
+ _ ->
+ []
+ end,
+ PortAct =
+ case (catch inet:getopts(Id, [active])) of
+ {ok, PA} ->
+ [{port_act, PA}];
+ _ ->
+ []
+ end,
+ PortStats =
+ case (catch inet:getstat(Id)) of
+ {ok, Stat} ->
+ [{port_stats, Stat}];
+ _ ->
+ []
+ end,
+ IfList =
+ case (catch inet:getif(Id)) of
+ {ok, IFs} ->
+ [{interfaces, IFs}];
+ _ ->
+ []
+ end,
+ BufSz =
+ case (catch inet:getopts(Id, [recbuf, sndbuf, buffer])) of
+ {ok, Sz} ->
+ [{buffer_size, Sz}];
+ _ ->
+ []
+ end,
+ [{socket, Id}] ++
+ IfList ++
+ PortStats ++
+ PortInfo ++
+ PortStatus ++
+ PortAct ++
+ BufSz.
+
+
+%%-----------------------------------------------------------------
+%% Counter functions
+%%-----------------------------------------------------------------
+init_counters() ->
+ F = fun(Counter) -> maybe_create_counter(Counter) end,
+ lists:map(F, counters()).
+
+reset_counters() ->
+ F = fun(Counter) -> snmpm_config:reset_stats_counter(Counter) end,
+ lists:map(F, counters()).
+
+maybe_create_counter(Counter) ->
+ snmpm_config:maybe_cre_stats_counter(Counter, 0).
+
+counters() ->
+ [
+ netIfMsgOutDrops,
+ netIfMsgInDrops,
+ netIfPduOutDrops,
+ netIfPduInDrops
+ ].
+
+inc(Name) -> inc(Name, 1).
+inc(Name, N) -> snmpm_config:incr_stats_counter(Name, N).
+
+%% get_counters() ->
+%% Counters = counters(),
+%% get_counters(Counters, []).
+
+%% get_counters([], Acc) ->
+%% lists:reverse(Acc);
+%% get_counters([Counter|Counters], Acc) ->
+%% case snmpm_config:get_stats_counter(Counter) of
+%% {ok, CounterVal} ->
+%% get_counters(Counters, [{Counter, CounterVal}|Acc]);
+%% _ ->
+%% get_counters(Counters, Acc)
+%% end.
+
+
+%% ----------------------------------------------------------------
+
+call(Pid, Req) ->
+ call(Pid, Req, infinity).
+
+call(Pid, Req, Timeout) ->
+ gen_server:call(Pid, Req, Timeout).
+
+cast(Pid, Msg) ->
+ gen_server:cast(Pid, Msg).
+
diff --git a/lib/snmp/src/misc/snmp_conf.erl b/lib/snmp/src/misc/snmp_conf.erl
index 7249def24e..e1e7fab57b 100644
--- a/lib/snmp/src/misc/snmp_conf.erl
+++ b/lib/snmp/src/misc/snmp_conf.erl
@@ -1,7 +1,7 @@
%%
%% %CopyrightBegin%
%%
-%% Copyright Ericsson AB 1996-2011. All Rights Reserved.
+%% Copyright Ericsson AB 1996-2012. All Rights Reserved.
%%
%% The contents of this file are subject to the Erlang Public License,
%% Version 1.1, (the "License"); you may not use this file except in
@@ -71,6 +71,18 @@
%%-----------------------------------------------------------------
+%% read_files(Dir, Files) -> Configs
+%% Dir - string() - Full path to the config dir.
+%% Files - [{Gen, Filter, Check, FileName}]
+%% Gen - function/2 - In case of failure when reading the config file,
+%% this function is called to either generate a
+%% default file or issue the error.
+%% Filter - function/1 - Filters all the config entries read from the file
+%% Check - function/1 - Check each entry as they are read from the file.
+%% FileName - string() - Name of the config file.
+%% Configs - [config_entry()]
+%% config_entry() - term()
+
read_files(Dir, Files) when is_list(Dir) andalso is_list(Files) ->
read_files(Dir, Files, []).
@@ -90,7 +102,7 @@ read_files(Dir, [{Gen, Filter, Check, FileName}|Files], Res)
{error, R} ->
?vlog("failed reading file info for ~s: "
"~n ~p", [FileName, R]),
- Gen(Dir),
+ Gen(Dir, R),
read_files(Dir, Files, [Filter([])|Res])
end.
@@ -99,6 +111,7 @@ read_files(Dir, [{Gen, Filter, Check, FileName}|Files], Res)
read(File, Check) when is_function(Check) ->
?vdebug("read -> entry with"
"~n File: ~p", [File]),
+
Fd = open_file(File),
case loop(Fd, [], Check, 1, File) of
diff --git a/lib/snmp/src/misc/snmp_config.erl b/lib/snmp/src/misc/snmp_config.erl
index 6ab20e3e48..1da2c339c7 100644
--- a/lib/snmp/src/misc/snmp_config.erl
+++ b/lib/snmp/src/misc/snmp_config.erl
@@ -90,6 +90,17 @@
]).
+-export_type([void/0,
+ verify_config_entry_function/0,
+ verify_config_function/0,
+ write_config_function/0]).
+
+
+%%----------------------------------------------------------------------
+
+-type void() :: term(). % Any value - ignored
+
+
%%----------------------------------------------------------------------
%% Handy SNMP configuration
%%----------------------------------------------------------------------
@@ -2356,53 +2367,109 @@ write_sys_config_file_manager_atl_opt(Fid, {seqno, SeqNo}) ->
header() ->
- {Y,Mo,D} = date(),
- {H,Mi,S} = time(),
+ {Y, Mo, D} = date(),
+ {H, Mi, S} = time(),
io_lib:format("%% This file was generated by "
- "snmp_config (version-~s) ~w-~2.2.0w-~2.2.0w "
+ "~w (version-~s) ~w-~2.2.0w-~2.2.0w "
"~2.2.0w:~2.2.0w:~2.2.0w\n",
- [?version,Y,Mo,D,H,Mi,S]).
+ [?MODULE, ?version, Y, Mo, D, H, Mi, S]).
+
+%% *If* these functions are successfull, they successfully return anything
+%% (which is ignored), but they fail with either a throw or an exit or
+%% something similar.
+
+%% Verification of one config entry read from a file
+-type(verify_config_entry_function() ::
+ fun((Entry :: term()) -> ok | {error, Reason :: term()})).
+
+%% Verification of config to be written
+-type(verify_config_function() ::
+ fun(() -> void())).
+
+%% Write config to file (as defined by Fd)
+-type(write_config_function() ::
+ fun((Fd :: file:io_device()) -> void())).
+
+-spec write_config_file(Dir :: string(),
+ FileName :: string(),
+ Verify :: verify_config_function(),
+ Write :: write_config_function()) ->
+ ok | {error, Reason :: term()}.
write_config_file(Dir, FileName, Verify, Write)
when (is_list(Dir) andalso
is_list(FileName) andalso
is_function(Verify) andalso
is_function(Write)) ->
- (catch do_write_config_file(Dir, FileName, Verify, Write)).
+ try
+ begin
+ do_write_config_file(Dir, FileName, Verify, Write)
+ end
+ catch
+ throw:Error ->
+ Error;
+ T:E ->
+ {error, {failed_write, Dir, FileName, T, E}}
+ end.
+
do_write_config_file(Dir, FileName, Verify, Write) ->
Verify(),
case file:open(filename:join(Dir, FileName), [write]) of
{ok, Fd} ->
- (catch Write(Fd)),
- file:close(Fd),
- ok;
+ file_write_and_close(Write, Fd, Dir, FileName);
Error ->
Error
end.
-
append_config_file(Dir, FileName, Verify, Write)
when (is_list(Dir) andalso
is_list(FileName) andalso
is_function(Verify) andalso
is_function(Write)) ->
- (catch do_append_config_file(Dir, FileName, Verify, Write)).
+ try
+ begin
+ do_append_config_file(Dir, FileName, Verify, Write)
+ end
+ catch
+ throw:Error ->
+ Error;
+ T:E ->
+ {error, {failed_append, Dir, FileName, T, E}}
+ end.
do_append_config_file(Dir, FileName, Verify, Write) ->
Verify(),
case file:open(filename:join(Dir, FileName), [read, write]) of
{ok, Fd} ->
file:position(Fd, eof),
- (catch Write(Fd)),
- file:close(Fd),
- ok;
+ file_write_and_close(Write, Fd, Dir, FileName);
Error ->
Error
end.
+file_write_and_close(Write, Fd, Dir, FileName) ->
+ ok = Write(Fd),
+ case file:sync(Fd) of
+ ok ->
+ case file:close(Fd) of
+ ok ->
+ ok;
+ {error, Reason} ->
+ {error, {failed_closing, Dir, FileName, Reason}}
+ end;
+ {error, Reason} ->
+ {error, {failed_syncing, Dir, FileName, Reason}}
+ end.
+
+
+-spec read_config_file(Dir :: string(),
+ FileName :: string(),
+ Verify :: verify_config_entry_function()) ->
+ {ok, Config :: list()} | {error, Reason :: term()}.
+
read_config_file(Dir, FileName, Verify)
when is_list(Dir) andalso is_list(FileName) andalso is_function(Verify) ->
(catch do_read_config_file(Dir, FileName, Verify)).
diff --git a/lib/snmp/src/misc/snmp_log.erl b/lib/snmp/src/misc/snmp_log.erl
index 2c781810ef..a8c5df0b64 100644
--- a/lib/snmp/src/misc/snmp_log.erl
+++ b/lib/snmp/src/misc/snmp_log.erl
@@ -1,7 +1,7 @@
%%
%% %CopyrightBegin%
%%
-%% Copyright Ericsson AB 1997-2011. All Rights Reserved.
+%% Copyright Ericsson AB 1997-2012. All Rights Reserved.
%%
%% The contents of this file are subject to the Erlang Public License,
%% Version 1.1, (the "License"); you may not use this file except in
@@ -21,7 +21,7 @@
-export([
- create/4, create/5, create/6,
+ create/4, create/5, create/6, open/1, open/2,
change_size/2, close/1, sync/1, info/1,
log/4,
log_to_txt/5, log_to_txt/6, log_to_txt/7,
@@ -109,6 +109,24 @@ create(Name, File, SeqNoGen, Size, Repair, Notify) ->
{error, {bad_args, Name, File, SeqNoGen, Size, Repair, Notify}}.
+%% -- open ---
+
+%% Open an already existing ( = open ) log
+
+open(Name) ->
+ open(Name, #snmp_log{seqno = disabled}).
+open(Name, #snmp_log{seqno = SeqNoGen} = _OldLog) ->
+ %% We include mode in the opts just to be on the safe side
+ case disk_log:open([{name, Name}, {mode, read_write}]) of
+ {ok, Log} ->
+ %% SeqNo must be proprly initiated also
+ {ok, #snmp_log{id = Log, seqno = SeqNoGen}};
+ {repaired, Log, _RecBytes, _BadBytes} ->
+ {ok, #snmp_log{id = Log, seqno = SeqNoGen}};
+ ERROR ->
+ ERROR
+ end.
+
%% -- close ---
@@ -394,6 +412,14 @@ log_to_io(Log, FileName, Dir, Mibs, Start) ->
log_to_io(Log, FileName, Dir, Mibs, Start, Stop)
when is_list(Mibs) ->
+ ?vtrace("log_to_io -> entry with"
+ "~n Log: ~p"
+ "~n FileName: ~p"
+ "~n Dir: ~p"
+ "~n Mibs: ~p"
+ "~n Start: ~p"
+ "~n Stop: ~p",
+ [Log, FileName, Dir, Mibs, Start, Stop]),
File = filename:join(Dir, FileName),
Converter = fun(L) ->
do_log_to_io(L, Mibs, Start, Stop)
@@ -401,28 +427,10 @@ log_to_io(Log, FileName, Dir, Mibs, Start, Stop)
log_convert(Log, File, Converter).
-%% -- log_to_plain ---
-
-%% log_to_plain(Log, FileName, Dir) ->
-%% log_to_plain(Log, FileName, Dir, null, null).
-
-%% log_to_plain(Log, FileName, Dir, Start) ->
-%% log_to_plain(Log, FileName, Dir, Start, null).
-
-%% log_to_plain(Log, FileName, Dir, Start, Stop)
-%% when is_list(Mibs) ->
-%% File = filename:join(Dir, FileName),
-%% Converter = fun(L) ->
-%% do_log_to_plain(L, Start, Stop)
-%% end,
-%% log_convert(Log, File, Converter).
-
-
%% --------------------------------------------------------------------
%% Internal functions
%% --------------------------------------------------------------------
-
%% -- log_convert ---
log_convert(#snmp_log{id = Log}, File, Converter) ->
@@ -431,6 +439,26 @@ log_convert(Log, File, Converter) ->
do_log_convert(Log, File, Converter).
do_log_convert(Log, File, Converter) ->
+ %% ?vtrace("do_log_converter -> entry with"
+ %% "~n Log: ~p"
+ %% "~n File: ~p"
+ %% "~n disk_log:info(Log): ~p", [Log, File, disk_log:info(Log)]),
+ {Pid, Ref} =
+ erlang:spawn_monitor(
+ fun() ->
+ Result = do_log_convert2(Log, File, Converter),
+ exit(Result)
+ end),
+ receive
+ {'DOWN', Ref, process, Pid, Result} ->
+ %% ?vtrace("do_log_converter -> received result"
+ %% "~n Result: ~p"
+ %% "~n disk_log:info(Log): ~p",
+ %% [Result, disk_log:info(Log)]),
+ Result
+ end.
+
+do_log_convert2(Log, File, Converter) ->
%% First check if the caller process has already opened the
%% log, because if we close an already open log we will cause
%% a runtime error.
@@ -439,29 +467,18 @@ do_log_convert(Log, File, Converter) ->
Converter(Log);
false ->
%% Not yet member of the ruling party, apply for membership...
- %% If a log is opened as read_write it is not possible to
- %% open it as read_only. So, to get around this we open
- %% it under a different name...
- Log2 = convert_name(Log),
- case log_open(Log2, File) of
+ case log_open(Log, File) of
{ok, _} ->
- Res = Converter(Log2),
- disk_log:close(Log2),
+ Res = Converter(Log),
+ disk_log:close(Log),
Res;
{error, {name_already_open, _}} ->
- Converter(Log2);
+ Converter(Log);
{error, Reason} ->
{error, {Log, Reason}}
end
end.
-convert_name(Name) when is_list(Name) ->
- Name ++ "_tmp";
-convert_name(Name) when is_atom(Name) ->
- list_to_atom(atom_to_list(Name) ++ "_tmp");
-convert_name(Name) ->
- lists:flatten(io_lib:format("~w_tmp", [Name])).
-
%% -- do_log_to_text ---
@@ -705,21 +722,21 @@ tsf_ge(_Local,Universal,{universal_time,DateTime}) ->
tsf_ge(Local,_Universal,DateTime) ->
tsf_ge(Local,DateTime).
-tsf_ge(TimeStamp,DateTime) ->
+tsf_ge(TimeStamp, DateTime) ->
T1 = calendar:datetime_to_gregorian_seconds(TimeStamp),
T2 = calendar:datetime_to_gregorian_seconds(DateTime),
T1 >= T2.
-tsf_le(_Local,_Universal,null) ->
+tsf_le(_Local, _Universal, null) ->
true;
-tsf_le(Local,_Universal,{local_time,DateTime}) ->
- tsf_le(Local,DateTime);
-tsf_le(_Local,Universal,{universal_time,DateTime}) ->
- tsf_le(Universal,DateTime);
-tsf_le(Local,_Universal,DateTime) ->
+tsf_le(Local, _Universal, {local_time, DateTime}) ->
+ tsf_le(Local, DateTime);
+tsf_le(_Local, Universal, {universal_time, DateTime}) ->
+ tsf_le(Universal, DateTime);
+tsf_le(Local, _Universal, DateTime) ->
tsf_le(Local,DateTime).
-tsf_le(TimeStamp,DateTime) ->
+tsf_le(TimeStamp, DateTime) ->
T1 = calendar:datetime_to_gregorian_seconds(TimeStamp),
T2 = calendar:datetime_to_gregorian_seconds(DateTime),
T1 =< T2.
@@ -864,11 +881,8 @@ do_std_log_open(Name, File, Size, Repair, Notify) ->
log_open(Name, File) ->
- Opts = [{name, Name},
- {file, File},
- {type, ?LOG_TYPE},
- {format, ?LOG_FORMAT},
- {mode, read_only}],
+ Opts = [{name, Name},
+ {file, File}],
case disk_log:open(Opts) of
{error, {badarg, size}} ->
{error, no_such_log};
diff --git a/lib/snmp/src/misc/snmp_verbosity.erl b/lib/snmp/src/misc/snmp_verbosity.erl
index 85037ba2ae..df5986b7bc 100644
--- a/lib/snmp/src/misc/snmp_verbosity.erl
+++ b/lib/snmp/src/misc/snmp_verbosity.erl
@@ -1,7 +1,7 @@
%%
%% %CopyrightBegin%
%%
-%% Copyright Ericsson AB 2000-2009. All Rights Reserved.
+%% Copyright Ericsson AB 2000-2012. All Rights Reserved.
%%
%% The contents of this file are subject to the Erlang Public License,
%% Version 1.1, (the "License"); you may not use this file except in
@@ -76,7 +76,7 @@ format_timestamp({_N1, _N2, N3} = Now) ->
{YYYY,MM,DD} = Date,
{Hour,Min,Sec} = Time,
FormatDate =
- io_lib:format("~.4w:~.2.0w:~.2.0w ~.2.0w:~.2.0w:~.2.0w 4~w",
+ io_lib:format("~.4w:~.2.0w:~.2.0w ~.2.0w:~.2.0w:~.2.0w ~w",
[YYYY,MM,DD,Hour,Min,Sec,round(N3/1000)]),
lists:flatten(FormatDate).
@@ -144,6 +144,8 @@ image_of_sname(mse) -> "M-SERVER";
image_of_sname(msew) -> io_lib:format("M-SERVER-worker(~p)", [self()]);
image_of_sname(mns) -> "M-NOTE-STORE";
image_of_sname(mnif) -> "M-NET-IF";
+image_of_sname(mnifl) -> "M-NET-IF-LOGGER";
+image_of_sname(mnifw) -> io_lib:format("M-NET-IF-worker(~p)", [self()]);
image_of_sname(mconf) -> "M-CONF";
image_of_sname(mgr) -> "MGR";
diff --git a/lib/snmp/test/Makefile b/lib/snmp/test/Makefile
index 78ffb1c255..8c1f53e51a 100644
--- a/lib/snmp/test/Makefile
+++ b/lib/snmp/test/Makefile
@@ -224,6 +224,9 @@ $(SNMP_BIN_TARGET_DIR)/Klas4.bin: $(SNMP_BIN_TARGET_DIR)/Klas3.bin
$(SNMP_BIN_TARGET_DIR)/SA-MIB.bin: $(SNMP_BIN_TARGET_DIR)/OLD-SNMPEA-MIB.bin
+$(SNMP_BIN_TARGET_DIR)/Test3.bin: $(SNMP_BIN_TARGET_DIR)/Test2.bin
+
+
# ----------------------------------------------------
# Release Target
# ----------------------------------------------------
diff --git a/lib/snmp/test/exp/.gitignore b/lib/snmp/test/exp/.gitignore
new file mode 100644
index 0000000000..e69de29bb2
--- /dev/null
+++ b/lib/snmp/test/exp/.gitignore
diff --git a/lib/snmp/test/snmp_agent_bl_test.erl b/lib/snmp/test/exp/snmp_agent_bl_test.erl
index b17489a755..b17489a755 100644
--- a/lib/snmp/test/snmp_agent_bl_test.erl
+++ b/lib/snmp/test/exp/snmp_agent_bl_test.erl
diff --git a/lib/snmp/test/snmp_agent_ms_test.erl b/lib/snmp/test/exp/snmp_agent_ms_test.erl
index 1f34f1c8d1..1f34f1c8d1 100644
--- a/lib/snmp/test/snmp_agent_ms_test.erl
+++ b/lib/snmp/test/exp/snmp_agent_ms_test.erl
diff --git a/lib/snmp/test/snmp_agent_mt_test.erl b/lib/snmp/test/exp/snmp_agent_mt_test.erl
index 4f125c0017..4f125c0017 100644
--- a/lib/snmp/test/snmp_agent_mt_test.erl
+++ b/lib/snmp/test/exp/snmp_agent_mt_test.erl
diff --git a/lib/snmp/test/snmp_agent_v1_test.erl b/lib/snmp/test/exp/snmp_agent_v1_test.erl
index 737bb25cc3..737bb25cc3 100644
--- a/lib/snmp/test/snmp_agent_v1_test.erl
+++ b/lib/snmp/test/exp/snmp_agent_v1_test.erl
diff --git a/lib/snmp/test/snmp_agent_v2_test.erl b/lib/snmp/test/exp/snmp_agent_v2_test.erl
index dc94c18ad9..dc94c18ad9 100644
--- a/lib/snmp/test/snmp_agent_v2_test.erl
+++ b/lib/snmp/test/exp/snmp_agent_v2_test.erl
diff --git a/lib/snmp/test/snmp_agent_v3_test.erl b/lib/snmp/test/exp/snmp_agent_v3_test.erl
index 266be72878..266be72878 100644
--- a/lib/snmp/test/snmp_agent_v3_test.erl
+++ b/lib/snmp/test/exp/snmp_agent_v3_test.erl
diff --git a/lib/snmp/test/modules.mk b/lib/snmp/test/modules.mk
index eacc749b53..7b0bdc5b8f 100644
--- a/lib/snmp/test/modules.mk
+++ b/lib/snmp/test/modules.mk
@@ -76,7 +76,8 @@ MIB_FILES = \
TestTrap.mib \
TestTrapv2.mib \
Test1.mib \
- Test2.mib
+ Test2.mib \
+ Test3.mib
SPECS = snmp.spec snmp.spec.vxworks
diff --git a/lib/snmp/test/snmp_SUITE.erl b/lib/snmp/test/snmp_SUITE.erl
index b6d72da2fa..22b9c64588 100644
--- a/lib/snmp/test/snmp_SUITE.erl
+++ b/lib/snmp/test/snmp_SUITE.erl
@@ -1,7 +1,7 @@
%%
%% %CopyrightBegin%
%%
-%% Copyright Ericsson AB 1997-2011. All Rights Reserved.
+%% Copyright Ericsson AB 1997-2012. All Rights Reserved.
%%
%% The contents of this file are subject to the Erlang Public License,
%% Version 1.1, (the "License"); you may not use this file except in
@@ -19,6 +19,8 @@
-module(snmp_SUITE).
+-include("snmp_test_lib.hrl").
+
-export([all/0,
suite/0,
groups/0,
@@ -39,6 +41,21 @@ end_per_testcase(_Case, Config) when is_list(Config) ->
Config.
+init_per_suite(Config) when is_list(Config) ->
+
+ ?DBG("init_per_suite -> entry with"
+ "~n Config: ~p", [Config]),
+
+ Config.
+
+end_per_suite(Config) when is_list(Config) ->
+
+ ?DBG("end_per_suite -> entry with"
+ "~n Config: ~p", [Config]),
+
+ Config.
+
+
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
%% Top test case
@@ -53,7 +70,8 @@ all() ->
{group, manager}].
groups() ->
- [{app, [], [{group, app_test},
+ [
+ {app, [], [{group, app_test},
{group, appup_test}]},
{compiler, [], [{group, compiler_test}]},
{misc, [], [{group, conf_test},
@@ -66,6 +84,7 @@ groups() ->
{manager, [], [{group, manager_config_test},
{group, manager_user_test},
{group, manager_test}]},
+
{app_test, [], [{snmp_app_test, all}]},
{appup_test, [], [{snmp_appup_test, all}]},
{compiler_test, [], [{snmp_compiler_test, all}]},
@@ -78,17 +97,25 @@ groups() ->
{agent_test, [], [{snmp_agent_test, all}]},
{manager_config_test, [], [{snmp_manager_config_test, all}]},
{manager_user_test, [], [{snmp_manager_user_test, all}]},
- {manager_test, [], [{snmp_manager_test, all}]}].
+ {manager_test, [], [{snmp_manager_test, all}]}
+ ].
-init_per_suite(Config) ->
- Config.
-end_per_suite(_Config) ->
- ok.
+init_per_group(GroupName, Config0) ->
-init_per_group(_GroupName, Config) ->
- Config.
+ ?DBG("init_per_group -> entry with"
+ "~n GroupName: ~p"
+ "~n Config0: ~p", [GroupName, Config0]),
+
+ %% Group name is not really the suite name
+ %% (but it is a good enough approximation),
+ %% but it does not matter since we only need
+ %% it to be unique.
+ snmp_test_lib:init_suite_top_dir(GroupName, Config0).
+
end_per_group(_GroupName, Config) ->
- Config.
+ lists:keydelete(snmp_suite_top_dir, 1, Config).
+
+
diff --git a/lib/snmp/test/snmp_agent_test.erl b/lib/snmp/test/snmp_agent_test.erl
index e968bc65b1..8ee5dd534d 100644
--- a/lib/snmp/test/snmp_agent_test.erl
+++ b/lib/snmp/test/snmp_agent_test.erl
@@ -224,52 +224,82 @@ groups() ->
},
{tickets2, [], [otp8395, otp9884]},
{otp_4394, [], [otp_4394_test]},
- {otp_7157, [], [otp_7157_test]
- }
+ {otp_7157, [], [otp_7157_test]}
].
-init_per_group(all_tcs, Config) ->
- init_all(Config);
-init_per_group(otp_7157, Config) ->
- init_otp_7157(Config);
-init_per_group(otp_4394, Config) ->
- init_otp_4394(Config);
-init_per_group(v2_inform, Config) ->
- init_v2_inform(Config);
-init_per_group(multiple_reqs_2, Config) ->
- init_mul(Config);
-init_per_group(multiple_reqs, Config) ->
- init_mul(Config);
-init_per_group(test_multi_threaded, Config) ->
- init_mt(Config);
-init_per_group(test_v3, Config) ->
- init_v3(Config);
-init_per_group(test_v1_v2, Config) ->
- init_v1_v2(Config);
-init_per_group(test_v2, Config) ->
- init_v2(Config);
-init_per_group(test_v1, Config) ->
- init_v1(Config);
-init_per_group(misc, Config) ->
- init_misc(Config);
-init_per_group(mib_storage_varm_mnesia, Config) ->
- init_varm_mib_storage_mnesia(Config);
-init_per_group(mib_storage_varm_dets, Config) ->
- init_varm_mib_storage_dets(Config);
-init_per_group(mib_storage_size_check_mnesia, Config) ->
- init_size_check_msm(Config);
-init_per_group(mib_storage_size_check_dets, Config) ->
- init_size_check_msd(Config);
-init_per_group(mib_storage_size_check_ets, Config) ->
- init_size_check_mse(Config);
-init_per_group(mib_storage_mnesia, Config) ->
- init_mib_storage_mnesia(Config);
-init_per_group(mib_storage_dets, Config) ->
- init_mib_storage_dets(Config);
-init_per_group(mib_storage_ets, Config) ->
- init_mib_storage_ets(Config);
-init_per_group(_GroupName, Config) ->
- Config.
+
+init_per_suite(Config0) when is_list(Config0) ->
+
+ ?DBG("init_per_suite -> entry with"
+ "~n Config0: ~p", [Config0]),
+
+ Config1 = snmp_test_lib:init_suite_top_dir(?MODULE, Config0),
+ Config2 = snmp_test_lib:fix_data_dir(Config1),
+
+ %% Mib-dirs
+ MibDir = snmp_test_lib:lookup(data_dir, Config2),
+ StdMibDir = filename:join([code:priv_dir(snmp), "mibs"]),
+
+ Config3 = [{mib_dir, MibDir}, {std_mib_dir, StdMibDir} | Config2],
+
+ ?DBG("init_per_suite -> end with"
+ "~n Config3: ~p", [Config3]),
+
+ Config3.
+
+end_per_suite(Config) when is_list(Config) ->
+
+ ?DBG("end_per_suite -> entry with"
+ "~n Config: ~p", [Config]),
+
+ Config.
+
+
+init_per_group(all_tcs = GroupName, Config) ->
+ init_all(snmp_test_lib:init_group_top_dir(GroupName, Config));
+init_per_group(otp_7157 = GroupName, Config) ->
+ init_otp_7157(snmp_test_lib:init_group_top_dir(GroupName, Config));
+init_per_group(otp_4394 = GroupName, Config) ->
+ init_otp_4394(snmp_test_lib:init_group_top_dir(GroupName, Config));
+init_per_group(v2_inform = GroupName, Config) ->
+ init_v2_inform(snmp_test_lib:init_group_top_dir(GroupName, Config));
+init_per_group(multiple_reqs_2 = GroupName, Config) ->
+ init_mul(snmp_test_lib:init_group_top_dir(GroupName, Config));
+init_per_group(multiple_reqs = GroupName, Config) ->
+ init_mul(snmp_test_lib:init_group_top_dir(GroupName, Config));
+init_per_group(test_multi_threaded = GroupName, Config) ->
+ init_mt(snmp_test_lib:init_group_top_dir(GroupName, Config));
+init_per_group(test_v3 = GroupName, Config) ->
+ init_v3(snmp_test_lib:init_group_top_dir(GroupName, Config));
+init_per_group(test_v1_v2 = GroupName, Config) ->
+ init_v1_v2(snmp_test_lib:init_group_top_dir(GroupName, Config));
+init_per_group(test_v2 = GroupName, Config) ->
+ init_v2(snmp_test_lib:init_group_top_dir(GroupName, Config));
+init_per_group(test_v1 = GroupName, Config) ->
+ init_v1(snmp_test_lib:init_group_top_dir(GroupName, Config));
+init_per_group(misc = GroupName, Config) ->
+ init_misc(snmp_test_lib:init_group_top_dir(GroupName, Config));
+init_per_group(mib_storage_varm_mnesia = GroupName, Config) ->
+ init_varm_mib_storage_mnesia(snmp_test_lib:init_group_top_dir(GroupName,
+ Config));
+init_per_group(mib_storage_varm_dets = GroupName, Config) ->
+ init_varm_mib_storage_dets(snmp_test_lib:init_group_top_dir(GroupName,
+ Config));
+init_per_group(mib_storage_size_check_mnesia = GroupName, Config) ->
+ init_size_check_msm(snmp_test_lib:init_group_top_dir(GroupName, Config));
+init_per_group(mib_storage_size_check_dets = GroupName, Config) ->
+ init_size_check_msd(snmp_test_lib:init_group_top_dir(GroupName, Config));
+init_per_group(mib_storage_size_check_ets = GroupName, Config) ->
+ init_size_check_mse(snmp_test_lib:init_group_top_dir(GroupName, Config));
+init_per_group(mib_storage_mnesia = GroupName, Config) ->
+ init_mib_storage_mnesia(snmp_test_lib:init_group_top_dir(GroupName,
+ Config));
+init_per_group(mib_storage_dets = GroupName, Config) ->
+ init_mib_storage_dets(snmp_test_lib:init_group_top_dir(GroupName, Config));
+init_per_group(mib_storage_ets = GroupName, Config) ->
+ init_mib_storage_ets(snmp_test_lib:init_group_top_dir(GroupName, Config));
+init_per_group(GroupName, Config) ->
+ snmp_test_lib:init_group_top_dir(GroupName, Config).
end_per_group(all_tcs, Config) ->
finish_all(Config);
@@ -320,38 +350,36 @@ init_per_testcase(otp8395 = Case, Config) when is_list(Config) ->
?DBG("init_per_testcase -> entry with"
"~n Case: ~p"
"~n Config: ~p", [Case, Config]),
- Config2 = init_per_testcase2(Case, init_per_suite(Config)),
- otp8395({init, Config2});
+ otp8395({init, init_per_testcase2(Case, Config)});
init_per_testcase(otp9884 = Case, Config) when is_list(Config) ->
?DBG("init_per_testcase -> entry with"
"~n Case: ~p"
"~n Config: ~p", [Case, Config]),
- Config2 = init_per_testcase2(Case, init_per_suite(Config)),
- otp9884({init, Config2});
+ otp9884({init, init_per_testcase2(Case, Config)});
init_per_testcase(otp_7157_test = _Case, Config) when is_list(Config) ->
?DBG("init_per_testcase -> entry with"
"~n Case: ~p"
"~n Config: ~p", [_Case, Config]),
Dog = ?WD_START(?MINS(1)),
- [{watchdog, Dog}|Config];
+ [{watchdog, Dog} | Config ];
init_per_testcase(v2_inform_i = _Case, Config) when is_list(Config) ->
?DBG("init_per_testcase -> entry with"
"~n Case: ~p"
"~n Config: ~p", [_Case, Config]),
Dog = ?WD_START(?MINS(10)),
- [{watchdog, Dog}|Config];
+ [{watchdog, Dog} | Config ];
init_per_testcase(v3_inform_i = _Case, Config) when is_list(Config) ->
?DBG("init_per_testcase -> entry with"
"~n Case: ~p"
"~n Config: ~p", [_Case, Config]),
Dog = ?WD_START(?MINS(10)),
- [{watchdog, Dog}|Config];
+ [{watchdog, Dog} | Config ];
init_per_testcase(_Case, Config) when is_list(Config) ->
?DBG("init_per_testcase -> entry with"
"~n Case: ~p"
"~n Config: ~p", [_Case, Config]),
Dog = ?WD_START(?MINS(6)),
- [{watchdog, Dog}|Config].
+ [{watchdog, Dog}| Config ].
end_per_testcase(otp8395, Config) when is_list(Config) ->
otp8395({fin, Config});
@@ -366,65 +394,13 @@ end_per_testcase(_Case, Config) when is_list(Config) ->
Config.
-init_per_suite(Config) ->
- ?DBG("init_per_suite -> entry with"
- "~n Config: ~p", [Config]),
-
- %% Suite root dir for test suite
- PrivDir = ?config(priv_dir, Config),
-
- %% Create top-directory for this sub-suite
- SuiteTopDir = filename:join([PrivDir, ?MODULE]),
- case file:make_dir(SuiteTopDir) of
- ok ->
- ok;
- {error, eexist} ->
- %% This can happen since this is not really a
- %% suite-init function.
- ok;
- {error, Reason} ->
- ?FAIL({failed_creating_suite_top_dir, SuiteTopDir, Reason})
- end,
-
-
- %% --
- %% Fix config (data-dir is not correct):
- %%
-
- Config1 = fix_data_dir(Config),
- %% Config1 = Config,
-
- %% Mib-dirs
- MibDir = ?config(data_dir, Config1),
- StdMibDir = filename:join([code:priv_dir(snmp), "mibs"]),
-
- Config2 = [{suite_top_dir, SuiteTopDir},
- {mib_dir, MibDir},
- {std_mib_dir, StdMibDir} | Config1],
-
- ?DBG("init_per_suite -> done when"
- "~n Config2: ~p", [Config2]),
- Config2.
-
-%% end_per_suite(Config) ->
-end_per_suite(Config) ->
- Config.
-
-fix_data_dir(Config) ->
- DataDir0 = ?config(data_dir, Config),
- DataDir1 = filename:split(filename:absname(DataDir0)),
- [_|DataDir2] = lists:reverse(DataDir1),
- DataDir = filename:join(lists:reverse(DataDir2) ++ [?snmp_test_data]),
- Config1 = lists:keydelete(data_dir, 1, Config),
- [{data_dir, DataDir} | Config1].
+init_per_testcase2(Case, Config) ->
+ ?DBG("end_per_testcase2 -> entry with"
+ "~n Case: ~p"
+ "~n Config: ~p", [Case, Config]),
-init_per_testcase2(Case, Config) ->
- SuiteToDir = ?config(suite_top_dir, Config),
-
- %% Create top-directory for this test-case
- CaseTopDir = filename:join([SuiteToDir, Case]),
- ok = file:make_dir(CaseTopDir),
+ CaseTopDir = snmp_test_lib:init_testcase_top_dir(Case, Config),
%% Create agent top-dir(s)
AgentTopDir = filename:join([CaseTopDir, agent]),
@@ -623,19 +599,19 @@ mib_storage_mnesia_cases() ->
msm_mib_of].
mse_size_check_cases() ->
-[mse_size_check].
+ [mse_size_check].
msd_size_check_cases() ->
-[msd_size_check].
+ [msd_size_check].
msm_size_check_cases() ->
-[msm_size_check].
+ [msm_size_check].
varm_mib_storage_dets_cases() ->
-[msd_varm_mib_start].
+ [msd_varm_mib_start].
varm_mib_storage_mnesia_cases() ->
-[msm_varm_mib_start].
+ [msm_varm_mib_start].
init_mib_storage_ets(Config) when is_list(Config) ->
?LOG("init_mib_storage_ets -> entry", []),
@@ -644,36 +620,37 @@ init_mib_storage_ets(Config) when is_list(Config) ->
init_mib_storage_dets(Config) when is_list(Config) ->
?LOG("init_mib_storage_ets -> entry", []),
- ?line AgentDir = ?GCONF(agent_dir, Config),
- MibStorage = {snmp_mib_storage,{dets,AgentDir}},
+ ?line AgentDbDir = ?GCONF(agent_db_dir, Config),
+ MibStorage = {snmp_mib_storage, {dets, AgentDbDir}},
init_ms(Config, [MibStorage]).
init_mib_storage_mnesia(Config) when is_list(Config) ->
?LOG("init_mib_storage_ets -> entry", []),
- MibStorage = {snmp_mib_storage,{mnesia,[]}},
+ MibStorage = {snmp_mib_storage, {mnesia,[]}},
init_ms(Config, [MibStorage]).
init_ms(Config, Opts) when is_list(Config) ->
?LOG("init_mib_storage_ets -> entry", []),
- ?line SaNode = ?GCONF(snmp_sa, Config),
+ ?line SaNode = ?GCONF(snmp_sa, Config),
?line create_tables(SaNode),
- ?line AgentDir = ?GCONF(agent_dir, Config),
- ?line MgrDir = ?GCONF(mgr_dir, Config),
- ?line Ip = ?GCONF(ip, Config),
- ?line config([v1], MgrDir, AgentDir, tuple_to_list(Ip), tuple_to_list(Ip)),
+ ?line AgentConfDir = ?GCONF(agent_conf_dir, Config),
+ ?line MgrDir = ?GCONF(mgr_dir, Config),
+ ?line Ip = ?GCONF(ip, Config),
+ ?line config([v1], MgrDir, AgentConfDir,
+ tuple_to_list(Ip), tuple_to_list(Ip)),
MasterAgentVerbosity = {snmp_master_agent_verbosity, trace},
MibsVerbosity = {snmp_mibserver_verbosity, trace},
SymStoreVerbosity = {snmp_symbolic_store_verbosity, trace},
- Opts1 = [MasterAgentVerbosity,MibsVerbosity,SymStoreVerbosity|Opts],
- [{vsn, v1} | start_v1_agent(Config,Opts1)].
+ Opts1 = [MasterAgentVerbosity, MibsVerbosity, SymStoreVerbosity | Opts],
+ [{vsn, v1} | start_v1_agent(Config, Opts1)].
init_size_check_mse(Config) when is_list(Config) ->
MibStorage = {snmp_mib_storage, ets},
init_size_check_ms(Config, [MibStorage]).
init_size_check_msd(Config) when is_list(Config) ->
- AgentDir = ?GCONF(agent_dir, Config),
- MibStorage = {snmp_mib_storage, {dets, AgentDir}},
+ AgentDbDir = ?GCONF(agent_db_dir, Config),
+ MibStorage = {snmp_mib_storage, {dets, AgentDbDir}},
init_size_check_ms(Config, [MibStorage]).
init_size_check_msm(Config) when is_list(Config) ->
@@ -695,22 +672,24 @@ init_size_check_ms(Config, Opts) when is_list(Config) ->
?SKIP({failed_starting_crypto, Reason})
end,
create_tables(SaNode),
- AgentDir = ?GCONF(agent_dir, Config),
- MgrDir = ?GCONF(mgr_dir, Config),
- Ip = ?GCONF(ip, Config),
- ?line ok =
- config([v3], MgrDir, AgentDir, tuple_to_list(Ip), tuple_to_list(Ip)),
+ AgentConfDir = ?GCONF(agent_conf_dir, Config),
+ MgrDir = ?GCONF(mgr_dir, Config),
+ Ip = ?GCONF(ip, Config),
+ ?line ok = config([v3], MgrDir, AgentConfDir,
+ tuple_to_list(Ip), tuple_to_list(Ip)),
[{vsn, v3} | start_v3_agent(Config, Opts)].
init_varm_mib_storage_dets(Config) when is_list(Config) ->
?LOG("init_varm_mib_storage_dets -> entry", []),
- ?line SaNode = ?GCONF(snmp_sa, Config),
+ ?line SaNode = ?GCONF(snmp_sa, Config),
?line create_tables(SaNode),
- ?line AgentDir = ?GCONF(agent_dir, Config),
- ?line MgrDir = ?GCONF(mgr_dir, Config),
- ?line Ip = ?GCONF(ip, Config),
- ?line config([v1], MgrDir, AgentDir, tuple_to_list(Ip), tuple_to_list(Ip)),
- MibStorage = {snmp_mib_storage,{dets,AgentDir}},
+ ?line AgentDbDir = ?GCONF(agent_db_dir, Config),
+ ?line AgentConfDir = ?GCONF(agent_conf_dir, Config),
+ ?line MgrDir = ?GCONF(mgr_dir, Config),
+ ?line Ip = ?GCONF(ip, Config),
+ ?line config([v1], MgrDir, AgentConfDir,
+ tuple_to_list(Ip), tuple_to_list(Ip)),
+ MibStorage = {snmp_mib_storage, {dets, AgentDbDir}},
MasterAgentVerbosity = {snmp_master_agent_verbosity, trace},
MibsVerbosity = {snmp_mibserver_verbosity, trace},
SymStoreVerbosity = {snmp_symbolic_store_verbosity, trace},
@@ -719,12 +698,13 @@ init_varm_mib_storage_dets(Config) when is_list(Config) ->
init_varm_mib_storage_mnesia(Config) when is_list(Config) ->
?LOG("init_varm_mib_storage_mnesia -> entry", []),
- ?line SaNode = ?GCONF(snmp_sa, Config),
+ ?line SaNode = ?GCONF(snmp_sa, Config),
?line create_tables(SaNode),
- ?line AgentDir = ?GCONF(agent_dir, Config),
- ?line MgrDir = ?GCONF(mgr_dir, Config),
- ?line Ip = ?GCONF(ip, Config),
- ?line config([v1], MgrDir, AgentDir, tuple_to_list(Ip), tuple_to_list(Ip)),
+ ?line AgentConfDir = ?GCONF(agent_conf_dir, Config),
+ ?line MgrDir = ?GCONF(mgr_dir, Config),
+ ?line Ip = ?GCONF(ip, Config),
+ ?line config([v1], MgrDir, AgentConfDir,
+ tuple_to_list(Ip), tuple_to_list(Ip)),
MibStorage = {snmp_mib_storage,{mnesia,[]}},
MasterAgentVerbosity = {snmp_master_agent_verbosity, trace},
MibsVerbosity = {snmp_mibserver_verbosity, trace},
@@ -1189,10 +1169,11 @@ v1_cases() ->
init_v1(Config) when is_list(Config) ->
?line SaNode = ?config(snmp_sa, Config),
?line create_tables(SaNode),
- ?line AgentDir = ?config(agent_dir, Config),
+ ?line AgentConfDir = ?config(agent_conf_dir, Config),
?line MgrDir = ?config(mgr_dir, Config),
?line Ip = ?config(ip, Config),
- ?line config([v1], MgrDir, AgentDir, tuple_to_list(Ip), tuple_to_list(Ip)),
+ ?line config([v1], MgrDir, AgentConfDir,
+ tuple_to_list(Ip), tuple_to_list(Ip)),
[{vsn, v1} | start_v1_agent(Config)].
finish_v1(Config) when is_list(Config) ->
@@ -1232,10 +1213,11 @@ v2_cases() ->
init_v2(Config) when is_list(Config) ->
SaNode = ?config(snmp_sa, Config),
create_tables(SaNode),
- AgentDir = ?config(agent_dir, Config),
+ AgentConfDir = ?config(agent_conf_dir, Config),
MgrDir = ?config(mgr_dir, Config),
Ip = ?config(ip, Config),
- config([v2], MgrDir, AgentDir, tuple_to_list(Ip), tuple_to_list(Ip)),
+ config([v2], MgrDir, AgentConfDir,
+ tuple_to_list(Ip), tuple_to_list(Ip)),
[{vsn, v2} | start_v2_agent(Config)].
finish_v2(Config) when is_list(Config) ->
@@ -1251,10 +1233,11 @@ v1_v2_cases() ->
init_v1_v2(Config) when is_list(Config) ->
SaNode = ?config(snmp_sa, Config),
create_tables(SaNode),
- AgentDir = ?config(agent_dir, Config),
+ AgentConfDir = ?config(agent_conf_dir, Config),
MgrDir = ?config(mgr_dir, Config),
Ip = ?config(ip, Config),
- config([v1,v2], MgrDir, AgentDir, tuple_to_list(Ip), tuple_to_list(Ip)),
+ config([v1,v2], MgrDir, AgentConfDir,
+ tuple_to_list(Ip), tuple_to_list(Ip)),
[{vsn, bilingual} | start_bilingual_agent(Config)].
finish_v1_v2(Config) when is_list(Config) ->
@@ -1315,10 +1298,10 @@ init_v3(Config) when is_list(Config) ->
end,
SaNode = ?config(snmp_sa, Config),
create_tables(SaNode),
- AgentDir = ?config(agent_dir, Config),
+ AgentConfDir = ?config(agent_conf_dir, Config),
MgrDir = ?config(mgr_dir, Config),
Ip = ?config(ip, Config),
- ?line ok = config([v3], MgrDir, AgentDir,
+ ?line ok = config([v3], MgrDir, AgentConfDir,
tuple_to_list(Ip), tuple_to_list(Ip)),
[{vsn, v3} | start_v3_agent(Config)].
@@ -1338,11 +1321,11 @@ mt_cases() ->
init_mt(Config) when is_list(Config) ->
SaNode = ?config(snmp_sa, Config),
create_tables(SaNode),
- AgentDir = ?config(agent_dir, Config),
+ AgentConfDir = ?config(agent_conf_dir, Config),
MgrDir = ?config(mgr_dir, Config),
Ip = ?config(ip, Config),
- ?line ok =
- config([v2], MgrDir, AgentDir, tuple_to_list(Ip), tuple_to_list(Ip)),
+ ?line ok = config([v2], MgrDir, AgentConfDir,
+ tuple_to_list(Ip), tuple_to_list(Ip)),
[{vsn, v2} | start_multi_threaded_agent(Config)].
finish_mt(Config) when is_list(Config) ->
@@ -1421,7 +1404,13 @@ simple(Config) when is_list(Config) ->
?P(simple),
init_case(Config),
- try_test(simple_standard_test).
+ try_test(simple_standard_test),
+
+ p("Display log"),
+ display_log(Config),
+
+ p("done"),
+ ok.
simple_2(X) -> ?P(simple_2), simple(X).
@@ -1601,7 +1590,7 @@ change_target_addr_config(Config) when is_list(Config) ->
try_test(ma_trap1, [MA]),
?LOG("change_target_addr_config -> set silence verbosity for local_db",[]),
- ?line snmpa:verbosity(local_db,silence),
+ ?line snmpa:verbosity(local_db, silence),
%% Start new dummy listener
?LOG("change_target_addr_config -> start dummy manager",[]),
@@ -1609,9 +1598,9 @@ change_target_addr_config(Config) when is_list(Config) ->
%% Reconfigure
?LOG("change_target_addr_config -> reconfigure",[]),
- AgentDir = ?config(agent_dir, Config),
- ?line rewrite_target_addr_conf(AgentDir, NewPort),
- ?line snmp_target_mib:reconfigure(AgentDir),
+ AgentConfDir = ?config(agent_conf_dir, Config),
+ ?line rewrite_target_addr_conf(AgentConfDir, NewPort),
+ ?line snmp_target_mib:reconfigure(AgentConfDir),
%% Send the trap again
?LOG("change_target_addr_config -> send trap again",[]),
@@ -1624,7 +1613,7 @@ change_target_addr_config(Config) when is_list(Config) ->
?line ok = dummy_manager_stop(Pid),
?LOG("change_target_addr_config -> reset target address config",[]),
- ?line reset_target_addr_conf(AgentDir),
+ ?line reset_target_addr_conf(AgentConfDir),
?LOG("change_target_addr_config -> unload TestTrap",[]),
?line unload_master("TestTrap").
@@ -2067,7 +2056,7 @@ v3_inform(_X) ->
{req, [], {conf, init_v3_inform, [v3_inform_i], finish_v3_inform}}.
init_v2_inform(Config) when is_list(Config) ->
- _Dir = ?config(agent_dir, Config),
+ _Dir = ?config(agent_conf_dir, Config),
%% snmp_internal_mib:configure(Dir),
Config.
@@ -2075,7 +2064,7 @@ init_v3_inform(X) ->
init_v2_inform(X).
finish_v2_inform(Config) when is_list(Config) ->
- _Dir = ?config(agent_dir, Config),
+ _Dir = ?config(agent_conf_dir, Config),
%% snmp_internal_mib:configure(Dir),
Config.
@@ -2377,9 +2366,9 @@ v3_md5_auth(Config) when is_list(Config) ->
?P1("Testing MD5 authentication...takes a few seconds..."),
- AgentDir = ?config(agent_dir, Config),
- ?line rewrite_target_params_conf(AgentDir, "authMD5", authNoPriv),
- ?line snmp_target_mib:reconfigure(AgentDir),
+ AgentConfDir = ?config(agent_conf_dir, Config),
+ ?line rewrite_target_params_conf(AgentConfDir, "authMD5", authNoPriv),
+ ?line snmp_target_mib:reconfigure(AgentConfDir),
MA = whereis(snmp_master_agent),
@@ -2388,14 +2377,14 @@ v3_md5_auth(Config) when is_list(Config) ->
?line load_master("TestTrapv2"),
try_test(v3_sync, [[{v2_proc, []},
- {ma_v2_trap1, [MA]},
- {v3_inform_sync, [MA]}]],
- [{sec_level, authNoPriv}, {user, "authMD5"}]),
+ {ma_v2_trap1, [MA]},
+ {v3_inform_sync, [MA]}]],
+ [{sec_level, authNoPriv}, {user, "authMD5"}]),
?line unload_master("TestTrapv2"),
?line unload_master("TestTrap"),
?line unload_master("Test2"),
- ?line reset_target_params_conf(AgentDir).
+ ?line reset_target_params_conf(AgentConfDir).
v3_sha_auth(suite) -> [];
v3_sha_auth(Config) when is_list(Config) ->
@@ -2404,9 +2393,9 @@ v3_sha_auth(Config) when is_list(Config) ->
?P1("Testing SHA authentication...takes a few seconds..."),
- AgentDir = ?config(agent_dir, Config),
- ?line rewrite_target_params_conf(AgentDir, "authSHA", authNoPriv),
- ?line snmp_target_mib:reconfigure(AgentDir),
+ AgentConfDir = ?config(agent_conf_dir, Config),
+ ?line rewrite_target_params_conf(AgentConfDir, "authSHA", authNoPriv),
+ ?line snmp_target_mib:reconfigure(AgentConfDir),
MA = whereis(snmp_master_agent),
@@ -2415,14 +2404,14 @@ v3_sha_auth(Config) when is_list(Config) ->
?line load_master("TestTrapv2"),
try_test(v3_sync, [[{v2_proc, []},
- {ma_v2_trap1, [MA]},
- {v3_inform_sync, [MA]}]],
- [{sec_level, authNoPriv}, {user, "authSHA"}]),
+ {ma_v2_trap1, [MA]},
+ {v3_inform_sync, [MA]}]],
+ [{sec_level, authNoPriv}, {user, "authSHA"}]),
?line unload_master("TestTrapv2"),
?line unload_master("TestTrap"),
?line unload_master("Test2"),
- ?line reset_target_params_conf(AgentDir).
+ ?line reset_target_params_conf(AgentConfDir).
v3_des_priv(suite) -> [];
v3_des_priv(Config) when is_list(Config) ->
@@ -2431,9 +2420,9 @@ v3_des_priv(Config) when is_list(Config) ->
?P1("Testing DES encryption...takes a few seconds..."),
- AgentDir = ?config(agent_dir, Config),
- ?line rewrite_target_params_conf(AgentDir, "privDES", authPriv),
- ?line snmp_target_mib:reconfigure(AgentDir),
+ AgentConfDir = ?config(agent_conf_dir, Config),
+ ?line rewrite_target_params_conf(AgentConfDir, "privDES", authPriv),
+ ?line snmp_target_mib:reconfigure(AgentConfDir),
MA = whereis(snmp_master_agent),
@@ -2444,14 +2433,14 @@ v3_des_priv(Config) when is_list(Config) ->
?line load_master("TestTrapv2"),
try_test(v3_sync, [[{v2_proc, []},
- {ma_v2_trap1, [MA]},
- {v3_inform_sync, [MA]}]],
- [{sec_level, authPriv}, {user, "privDES"}]),
+ {ma_v2_trap1, [MA]},
+ {v3_inform_sync, [MA]}]],
+ [{sec_level, authPriv}, {user, "privDES"}]),
?line unload_master("TestTrapv2"),
?line unload_master("TestTrap"),
?line unload_master("Test2"),
- ?line reset_target_params_conf(AgentDir).
+ ?line reset_target_params_conf(AgentConfDir).
%% -define(usmStatsNotInTimeWindows_instance, [1,3,6,1,6,3,15,1,1,2,0]).
@@ -4795,7 +4784,7 @@ snmp_user_based_sm_mib_3(Config) when is_list(Config) ->
?P(snmp_user_based_sm_mib_3),
init_case(Config),
- _AgentDir = ?config(agent_dir, Config),
+ _AgentDir = ?config(agent_conf_dir, Config),
?line load_master_std("SNMP-USER-BASED-SM-MIB"),
%% The newUser used here already has VACM access.
@@ -5727,28 +5716,28 @@ otp_3725_test(MaNode) ->
init_otp_4394(Config) when is_list(Config) ->
?DBG("init_otp_4394 -> entry with"
"~n Config: ~p", [Config]),
- ?line AgentDir = ?config(agent_dir, Config),
- ?line MgrDir = ?config(mgr_dir, Config),
- ?line Ip = ?config(ip, Config),
- ?line otp_4394_config(AgentDir, MgrDir, Ip),
+ ?line AgentConfDir = ?config(agent_conf_dir, Config),
+ ?line MgrDir = ?config(mgr_dir, Config),
+ ?line Ip = ?config(ip, Config),
+ ?line otp_4394_config(AgentConfDir, MgrDir, Ip),
MasterAgentVerbosity = {master_agent_verbosity, trace},
NetIfVerbosity = {net_if_verbosity, trace},
- Opts = [MasterAgentVerbosity,NetIfVerbosity],
- [{vsn, v1} | start_v1_agent(Config,Opts)].
+ Opts = [MasterAgentVerbosity, NetIfVerbosity],
+ [{vsn, v1} | start_v1_agent(Config, Opts)].
-otp_4394_config(AgentDir, MgrDir, Ip0) ->
+otp_4394_config(AgentConfDir, MgrDir, Ip0) ->
?DBG("otp_4394_config -> entry with"
- "~n AgentDir: ~p"
- "~n MgrDir: ~p"
- "~n Ip0: ~p", [AgentDir, MgrDir, Ip0]),
+ "~n AgentConfDir: ~p"
+ "~n MgrDir: ~p"
+ "~n Ip0: ~p", [AgentConfDir, MgrDir, Ip0]),
Vsn = [v1],
Ip = tuple_to_list(Ip0),
- ?line snmp_config:write_agent_snmp_files(AgentDir, Vsn, Ip,
+ ?line snmp_config:write_agent_snmp_files(AgentConfDir, Vsn, Ip,
?TRAP_UDP, Ip, 4000,
"OTP-4394 test"),
- ?line case update_usm(Vsn, AgentDir) of
+ ?line case update_usm(Vsn, AgentConfDir) of
true ->
- ?line copy_file(filename:join(AgentDir, "usm.conf"),
+ ?line copy_file(filename:join(AgentConfDir, "usm.conf"),
filename:join(MgrDir, "usm.conf")),
?line update_usm_mgr(Vsn, MgrDir);
false ->
@@ -5756,8 +5745,8 @@ otp_4394_config(AgentDir, MgrDir, Ip0) ->
end,
C1 = {"a", "all-rights", "initial", "", "pc"},
C2 = {"c", "secret", "secret_name", "", "secret_tag"},
- ?line write_community_conf(AgentDir, [C1, C2]),
- ?line update_vacm(Vsn, AgentDir),
+ ?line write_community_conf(AgentConfDir, [C1, C2]),
+ ?line update_vacm(Vsn, AgentConfDir),
Ta1 = {"shelob v1",
[134,138,177,177], 5000, 1500, 3, %% Anv�nd Ip och modda
"pc1",
@@ -5771,9 +5760,9 @@ otp_4394_config(AgentDir, MgrDir, Ip0) ->
"target_v1", "",
%% [255,255,255,255,0,0],
[], 2048},
- ?line write_target_addr_conf(AgentDir, [Ta1, Ta2]),
- ?line write_target_params_conf(AgentDir, Vsn),
- ?line write_notify_conf(AgentDir),
+ ?line write_target_addr_conf(AgentConfDir, [Ta1, Ta2]),
+ ?line write_target_params_conf(AgentConfDir, Vsn),
+ ?line write_notify_conf(AgentConfDir),
ok.
@@ -5826,10 +5815,11 @@ init_otp_7157(Config) when is_list(Config) ->
?DBG("init_otp_7157 -> entry with"
"~n Config: ~p", [Config]),
- ?line AgentDir = ?config(agent_dir, Config),
+ ?line AgentConfDir = ?config(agent_conf_dir, Config),
?line MgrDir = ?config(mgr_dir, Config),
?line Ip = ?config(ip, Config),
- ?line config([v2], MgrDir, AgentDir, tuple_to_list(Ip), tuple_to_list(Ip)),
+ ?line config([v2], MgrDir, AgentConfDir,
+ tuple_to_list(Ip), tuple_to_list(Ip)),
MasterAgentVerbosity = {master_agent_verbosity, trace},
NetIfVerbosity = {net_if_verbosity, trace},
Opts = [MasterAgentVerbosity, NetIfVerbosity],
@@ -6562,8 +6552,8 @@ write_community_conf(Dir, Conf) ->
write_target_addr_conf(Dir, Conf) ->
snmp_agent_test_lib:write_target_addr_conf(Dir, Conf).
-write_target_addr_conf(Dir, ManagerIp, UDP, Vsns) ->
- snmp_agent_test_lib:write_target_addr_conf(Dir, ManagerIp, UDP, Vsns).
+%% write_target_addr_conf(Dir, ManagerIp, UDP, Vsns) ->
+%% snmp_agent_test_lib:write_target_addr_conf(Dir, ManagerIp, UDP, Vsns).
rewrite_target_addr_conf(Dir, NewPort) ->
snmp_agent_test_lib:rewrite_target_addr_conf(Dir, NewPort).
@@ -6596,9 +6586,42 @@ copy_file(From, To) ->
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
+display_log(Config) ->
+ case lists:keysearch(agent_log_dir, 1, Config) of
+ {value, {_, Dir}} ->
+ case lists:keysearch(snmp_master, 1, Config) of
+ {value, {_, Node}} ->
+ LogDir = Dir,
+ Mibs = [],
+ OutFile = filename:join(LogDir, "snmpa_log.txt"),
+ p("~n"
+ "========================="
+ " < Audit Trail Log > "
+ "========================="
+ "~n"),
+ rcall(Node, snmpa, log_to_txt, [LogDir, Mibs, OutFile]),
+ rcall(Node, snmpa, log_to_io, [LogDir, Mibs]),
+ p("~n"
+ "========================="
+ " < / Audit Trail Log > "
+ "========================="
+ "~n", []);
+ false ->
+ p("display_log -> no agent node found"),
+ ok
+ end;
+ false ->
+ p("display_log -> no agent log dir found: "
+ "~n ~p", [Config]),
+ ok
+ end.
+
+
+%% ------
+
display_memory_usage() ->
Info = snmpa:info(snmp_master_agent),
- AMU = display_agent_memory_uasge(Info),
+ AMU = display_agent_memory_usage(Info),
NIMU = display_net_if_memory_usage(Info),
NSMU = display_note_store_memory_usage(Info),
SSMU = display_symbolic_store_memory_usage(Info),
@@ -6608,7 +6631,7 @@ display_memory_usage() ->
AMU ++ NIMU ++ NSMU ++ SSMU ++ LDBMU ++ MSMU, []),
ok.
-display_agent_memory_uasge(Info) ->
+display_agent_memory_usage(Info) ->
AgentInfo = lists_key1search(agent, Info),
ProcMem =
lists_key1search([process_memory,master_agent], AgentInfo),
@@ -6717,3 +6740,27 @@ lists_key1search(Key, List) when is_atom(Key) ->
regs() ->
lists:sort(registered()).
+
+%% ------
+
+rcall(Node, Mod, Func, Args) ->
+ case rpc:call(Node, Mod, Func, Args) of
+ {badrpc, nodedown} ->
+ ?FAIL({rpc_failure, Node});
+ Else ->
+ Else
+ end.
+
+
+%% ------
+
+p(F) ->
+ p(F, []).
+
+p(F, A) ->
+ io:format("*** [~s] ***"
+ "~n" ++ F ++ "~n", [formated_timestamp()|A]).
+
+formated_timestamp() ->
+ snmp_test_lib:formated_timestamp().
+
diff --git a/lib/snmp/test/snmp_agent_test_lib.erl b/lib/snmp/test/snmp_agent_test_lib.erl
index 084b3ee8da..cd9a87eab8 100644
--- a/lib/snmp/test/snmp_agent_test_lib.erl
+++ b/lib/snmp/test/snmp_agent_test_lib.erl
@@ -119,20 +119,10 @@
%%% didn't undo (since it failed).
%%%-----------------------------------------------------------------
-init_all(Config0) when is_list(Config0) ->
- ?LOG("init_all -> entry with"
- "~n Config0: ~p",[Config0]),
-
- %% --
- %% Fix config:
- %%
+init_all(Config) when is_list(Config) ->
- DataDir0 = ?config(data_dir, Config0),
- DataDir1 = filename:split(filename:absname(DataDir0)),
- [_|DataDir2] = lists:reverse(DataDir1),
- DataDir3 = filename:join(lists:reverse(DataDir2) ++ [?snmp_test_data]),
- Config1 = lists:keydelete(data_dir, 1, Config0),
- Config = [{data_dir, DataDir3 ++ "/"}|Config1],
+ ?LOG("init_all -> entry with"
+ "~n Config: ~p",[Config]),
%% --
%% Start nodes
@@ -143,34 +133,43 @@ init_all(Config0) when is_list(Config0) ->
%% --
- %% Create necessary files
+ %% Create necessary files ( and dirs )
%%
- PrivDir = ?config(priv_dir, Config),
- ?DBG("init_all -> PrivDir ~p", [PrivDir]),
+ SuiteTopDir = ?config(snmp_suite_top_dir, Config),
+ ?DBG("init_all -> SuiteTopDir ~p", [SuiteTopDir]),
- TopDir = filename:join(PrivDir, snmp_agent_test),
- case file:make_dir(TopDir) of
- ok ->
- ok;
- {error, eexist} ->
- ok;
- Error ->
- ?FAIL({failed_creating_subsuite_top_dir, Error})
- end,
+ AgentDir = filename:join(SuiteTopDir, "agent/"),
+ ?line ok = file:make_dir(AgentDir),
+ ?DBG("init_all -> AgentDir ~p", [AgentDir]),
- DataDir = ?config(data_dir, Config),
- ?DBG("init_all -> DataDir ~p", [DataDir]),
+ AgentDbDir = filename:join(AgentDir, "db/"),
+ ?line ok = file:make_dir(AgentDbDir),
+ ?DBG("init_all -> AgentDbDir ~p", [AgentDbDir]),
- ?line ok = file:make_dir(MgrDir = filename:join(TopDir, "mgr_dir/")),
- ?DBG("init_all -> MgrDir ~p", [MgrDir]),
+ AgentLogDir = filename:join(AgentDir, "log/"),
+ ?line ok = file:make_dir(AgentLogDir),
+ ?DBG("init_all -> AgentLogDir ~p", [AgentLogDir]),
- ?line ok = file:make_dir(AgentDir = filename:join(TopDir, "agent_dir/")),
- ?DBG("init_all -> AgentDir ~p", [AgentDir]),
+ AgentConfDir = filename:join(AgentDir, "conf/"),
+ ?line ok = file:make_dir(AgentConfDir),
+ ?DBG("init_all -> AgentConfDir ~p", [AgentConfDir]),
- ?line ok = file:make_dir(SaDir = filename:join(TopDir, "sa_dir/")),
+ MgrDir = filename:join(SuiteTopDir, "mgr/"),
+ ?line ok = file:make_dir(MgrDir),
+ ?DBG("init_all -> MgrDir ~p", [MgrDir]),
+
+ SaDir = filename:join(SuiteTopDir, "sa/"),
+ ?line ok = file:make_dir(SaDir),
?DBG("init_all -> SaDir ~p", [SaDir]),
+ SaDbDir = filename:join(SaDir, "db/"),
+ ?line ok = file:make_dir(SaDbDir),
+ ?DBG("init_all -> SaDbDir ~p", [SaDbDir]),
+
+ %% MibDir = ?config(mib_dir, Config),
+ %% ?DBG("init_all -> MibDir ~p", [DataDir]),
+
%% --
%% Start and initiate mnesia
@@ -184,11 +183,11 @@ init_all(Config0) when is_list(Config0) ->
?DBG("init_all -> application mnesia: set_env dir",[]),
?line application_controller:set_env(mnesia, dir,
- filename:join(TopDir, "Mnesia1")),
+ filename:join(AgentDbDir, "Mnesia1")),
?DBG("init_all -> application mnesia: set_env dir on node ~p",[SaNode]),
- ?line rpc:call(SaNode, application_controller, set_env,
- [mnesia, dir, filename:join(TopDir, "Mnesia2")]),
+ ?line rpc:call(SaNode, application_controller, set_env,
+ [mnesia, dir, filename:join(SaDir, "Mnesia2")]),
?DBG("init_all -> create mnesia schema",[]),
?line ok = mnesia:create_schema([SaNode, node()]),
@@ -199,13 +198,18 @@ init_all(Config0) when is_list(Config0) ->
?DBG("init_all -> start application mnesia on ~p",[SaNode]),
?line ok = rpc:call(SaNode, application, start, [mnesia]),
Ip = ?LOCALHOST(),
- [{snmp_sa, SaNode},
- {snmp_mgr, MgrNode},
- {agent_dir, AgentDir ++ "/"},
- {mgr_dir, MgrDir ++ "/"},
- {sa_dir, SaDir ++ "/"},
- {mib_dir, DataDir},
- {ip, Ip} |
+ [{snmp_sa, SaNode},
+ {snmp_mgr, MgrNode},
+ {snmp_master, node()},
+ {agent_dir, AgentDir ++ "/"},
+ {agent_db_dir, AgentDbDir ++ "/"},
+ {agent_log_dir, AgentLogDir ++ "/"},
+ {agent_conf_dir, AgentConfDir ++ "/"},
+ {sa_dir, SaDir ++ "/"},
+ {sa_db_dir, SaDbDir ++ "/"},
+ {mgr_dir, MgrDir ++ "/"},
+ %% {mib_dir, DataDir},
+ {ip, Ip} |
Config].
@@ -220,11 +224,14 @@ finish_all(Config) when is_list(Config) ->
%% --- This one *must* be run first in each case ---
init_case(Config) when is_list(Config) ->
+
?DBG("init_case -> entry with"
- "~n Config: ~p", [Config]),
- SaNode = ?config(snmp_sa, Config),
- MgrNode = ?config(snmp_mgr, Config),
- MasterNode = node(),
+ "~n Config: ~p", [Config]),
+
+ SaNode = ?config(snmp_sa, Config),
+ MgrNode = ?config(snmp_mgr, Config),
+ MasterNode = ?config(snmp_master, Config),
+ %% MasterNode = node(),
SaHost = ?HOSTNAME(SaNode),
MgrHost = ?HOSTNAME(MgrNode),
@@ -411,7 +418,8 @@ start_v3_agent(Config, Opts) when is_list(Config) andalso is_list(Opts) ->
start_bilingual_agent(Config) when is_list(Config) ->
start_agent(Config, [v1,v2]).
-start_bilingual_agent(Config, Opts) when is_list(Config) andalso is_list(Opts) ->
+start_bilingual_agent(Config, Opts)
+ when is_list(Config) andalso is_list(Opts) ->
start_agent(Config, [v1,v2], Opts).
start_mt_agent(Config) when is_list(Config) ->
@@ -423,57 +431,33 @@ start_mt_agent(Config, Opts) when is_list(Config) andalso is_list(Opts) ->
start_agent(Config, Vsns) ->
start_agent(Config, Vsns, []).
start_agent(Config, Vsns, Opts) ->
+
?LOG("start_agent -> entry (~p) with"
"~n Config: ~p"
"~n Vsns: ~p"
"~n Opts: ~p", [node(), Config, Vsns, Opts]),
- ?line AgentDir = ?config(agent_dir, Config),
- ?line SaNode = ?config(snmp_sa, Config),
-
-%% AgentConfig =
-%% [{agent_type, master},
-%% %% {multi_threaded, MultiT},
-%% %% {priority, Prio},
-%% %% {error_report_mod, ErrorReportMod},
-%% {versions, Vsns},
-%% {db_dir, AgentDir},
-%% %% {db_init_error, DbInitError},
-%% %% {set_mechanism, SetModule},
-%% %% {authentication_service, AuthModule},
-%% {audit_trail_log, [{type, read_write},
-%% {dir, AgentDir},
-%% {size, {10240, 10}},
-%% {repair, true}]},
-%% {config, [{verbosity, info},
-%% {dir, AgentDir},
-%% {force_load, false}]},
-%% {mibs, Mibs},
-%% %% {mib_storage, MibStorage},
-%% {local_db, []},
-%% {mib_server, []},
-%% {symbolic_store, []},
-%% {note_store, []},
-%% {net_if, []},
-%% %% {supervisor, SupOpts}
-%% ],
-
+ ?line AgentLogDir = ?config(agent_log_dir, Config),
+ ?line AgentConfDir = ?config(agent_conf_dir, Config),
+ ?line AgentDbDir = ?config(agent_db_dir, Config),
+ ?line SaNode = ?config(snmp_sa, Config),
+
app_env_init(vsn_init(Vsns) ++
- [{audit_trail_log, read_write_log},
- {audit_trail_log_dir, AgentDir},
- {audit_trail_log_size, {10240, 10}},
- {force_config_reload, false},
- {snmp_agent_type, master},
- {snmp_config_dir, AgentDir},
- {snmp_db_dir, AgentDir},
- {snmp_local_db_auto_repair, true},
- {snmp_local_db_verbosity, log},
- {snmp_master_agent_verbosity, trace},
- {snmp_supervisor_verbosity, trace},
- {snmp_mibserver_verbosity, log},
+ [{audit_trail_log, read_write_log},
+ {audit_trail_log_dir, AgentLogDir},
+ {audit_trail_log_size, {10240, 10}},
+ {force_config_reload, false},
+ {snmp_agent_type, master},
+ {snmp_config_dir, AgentConfDir},
+ {snmp_db_dir, AgentDbDir},
+ {snmp_local_db_auto_repair, true},
+ {snmp_local_db_verbosity, log},
+ {snmp_master_agent_verbosity, trace},
+ {snmp_supervisor_verbosity, trace},
+ {snmp_mibserver_verbosity, log},
{snmp_symbolic_store_verbosity, log},
- {snmp_note_store_verbosity, log},
- {snmp_net_if_verbosity, trace}],
+ {snmp_note_store_verbosity, log},
+ {snmp_net_if_verbosity, trace}],
Opts),
@@ -1237,30 +1221,44 @@ stop_node(Node) ->
%%% Configuration
%%%-----------------------------------------------------------------
-config(Vsns, MgrDir, AgentDir, MIp, AIp) ->
- ?line snmp_config:write_agent_snmp_files(AgentDir, Vsns, MIp,
- ?TRAP_UDP, AIp, 4000,
+config(Vsns, MgrDir, AgentConfDir, MIp, AIp) ->
+ ?LOG("config -> entry with"
+ "~n Vsns: ~p"
+ "~n MgrDir: ~p"
+ "~n AgentConfDir: ~p"
+ "~n MIp: ~p"
+ "~n AIp: ~p",
+ [Vsns, MgrDir, AgentConfDir, MIp, AIp]),
+ ?line snmp_config:write_agent_snmp_files(AgentConfDir, Vsns,
+ MIp, ?TRAP_UDP, AIp, 4000,
"test"),
- ?line case update_usm(Vsns, AgentDir) of
+ ?line case update_usm(Vsns, AgentConfDir) of
true ->
- ?line copy_file(filename:join(AgentDir, "usm.conf"),
+ ?line copy_file(filename:join(AgentConfDir, "usm.conf"),
filename:join(MgrDir, "usm.conf")),
?line update_usm_mgr(Vsns, MgrDir);
false ->
?line ok
end,
- ?line update_community(Vsns, AgentDir),
- ?line update_vacm(Vsns, AgentDir),
- ?line write_target_addr_conf(AgentDir, MIp, ?TRAP_UDP, Vsns),
- ?line write_target_params_conf(AgentDir, Vsns),
- ?line write_notify_conf(AgentDir),
+ ?line update_community(Vsns, AgentConfDir),
+ ?line update_vacm(Vsns, AgentConfDir),
+ ?line write_target_addr_conf(AgentConfDir, MIp, ?TRAP_UDP, Vsns),
+ ?line write_target_params_conf(AgentConfDir, Vsns),
+ ?line write_notify_conf(AgentConfDir),
ok.
delete_files(Config) ->
- Dir = ?config(agent_dir, Config),
- {ok, List} = file:list_dir(Dir),
+ AgentDir = ?config(agent_dir, Config),
+ delete_files(AgentDir, [db, conf]).
+
+delete_files(_AgentFiles, []) ->
+ ok;
+delete_files(AgentDir, [DirName|DirNames]) ->
+ Dir = filename:join(AgentDir, DirName),
+ {ok, Files} = file:list_dir(Dir),
lists:foreach(fun(FName) -> file:delete(filename:join(Dir, FName)) end,
- List).
+ Files),
+ delete_files(AgentDir, DirNames).
update_usm(Vsns, Dir) ->
case lists:member(v3, Vsns) of
@@ -1418,8 +1416,8 @@ rewrite_target_addr_conf2(_NewPort,O) ->
O.
reset_target_addr_conf(Dir) ->
- ?line ok = file:rename(filename:join(Dir,"target_addr.old"),
- filename:join(Dir,"target_addr.conf")).
+ ?line ok = file:rename(filename:join(Dir, "target_addr.old"),
+ filename:join(Dir, "target_addr.conf")).
write_target_params_conf(Dir, Vsns) ->
F = fun(v1) -> {"target_v1", v1, v1, "all-rights", noAuthNoPriv};
@@ -1458,7 +1456,6 @@ copy_file(From, To) ->
ok = file:write_file(To, Bin).
-
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
display_memory_usage() ->
diff --git a/lib/snmp/test/snmp_app_test.erl b/lib/snmp/test/snmp_app_test.erl
index bc62c8d530..0a320dbbce 100644
--- a/lib/snmp/test/snmp_app_test.erl
+++ b/lib/snmp/test/snmp_app_test.erl
@@ -23,8 +23,9 @@
-module(snmp_app_test).
-export([
- all/0,groups/0,init_per_group/2,end_per_group/2, init_per_suite/1,
- end_per_suite/1,
+ all/0, groups/0,
+ init_per_group/2, end_per_group/2,
+ init_per_suite/1, end_per_suite/1,
init_per_testcase/2, end_per_testcase/2,
fields/1,
@@ -52,33 +53,47 @@
%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%
all() ->
-Cases = [fields, modules, exportall, app_depend,
- undef_funcs, {group, start_and_stop}],
- Cases.
+ Cases =
+ [
+ fields,
+ modules,
+ exportall,
+ app_depend,
+ undef_funcs,
+ {group, start_and_stop}
+ ],
+ Cases.
groups() ->
[{start_and_stop, [],
- [start_and_stop_empty, start_and_stop_with_agent,
- start_and_stop_with_manager,
- start_and_stop_with_agent_and_manager,
- start_epmty_and_then_agent_and_manager_and_stop,
- start_with_agent_and_then_manager_and_stop,
- start_with_manager_and_then_agent_and_stop]}].
+ [start_and_stop_empty,
+ start_and_stop_with_agent,
+ start_and_stop_with_manager,
+ start_and_stop_with_agent_and_manager,
+ start_epmty_and_then_agent_and_manager_and_stop,
+ start_with_agent_and_then_manager_and_stop,
+ start_with_manager_and_then_agent_and_stop]}].
init_per_group(_GroupName, Config) ->
- Config.
+ Config.
end_per_group(_GroupName, Config) ->
- Config.
+ Config.
init_per_suite(Config) when is_list(Config) ->
?DISPLAY_SUITE_INFO(),
+
+ %% Note that part of this stuff (the suite top dir creation)
+ %% may already be done (if we run the entire snmp suite).
+
PrivDir = ?config(priv_dir, Config),
TopDir = filename:join(PrivDir, app),
case file:make_dir(TopDir) of
ok ->
ok;
+ {error, eexist} ->
+ ok;
Error ->
fail({failed_creating_subsuite_top_dir, Error})
end,
diff --git a/lib/snmp/test/snmp_compiler_test.erl b/lib/snmp/test/snmp_compiler_test.erl
index 0a147130b0..257fc47952 100644
--- a/lib/snmp/test/snmp_compiler_test.erl
+++ b/lib/snmp/test/snmp_compiler_test.erl
@@ -40,6 +40,7 @@
all/0,
groups/0, init_per_group/2, end_per_group/2,
init_per_testcase/2, end_per_testcase/2,
+ init_per_suite/1, end_per_suite/1,
description/1,
oid_conflicts/1,
@@ -48,6 +49,7 @@
agent_capabilities/1,
module_compliance/1,
warnings_as_errors/1,
+ augments_extra_info/1,
otp_6150/1,
otp_8574/1,
@@ -58,6 +60,7 @@
%%----------------------------------------------------------------------
%% Internal exports
%%----------------------------------------------------------------------
+
-export([
]).
@@ -74,19 +77,41 @@
%% External functions
%%======================================================================
-init_per_testcase(_Case, Config) when is_list(Config) ->
- Dir = ?config(priv_dir, Config),
- DataDir = ?config(data_dir, Config),
- [_|RL] = lists:reverse(filename:split(DataDir)),
- MibDir = join(lists:reverse(["snmp_test_data"|RL])),
- CompDir = join(Dir, "comp_dir/"),
- ?line ok = file:make_dir(CompDir),
- [{comp_dir, CompDir}, {mib_dir, MibDir} | Config].
+init_per_suite(Config0) when is_list(Config0) ->
+
+ ?DBG("init_per_suite -> entry with"
+ "~n Config0: ~p", [Config0]),
+
+ Config1 = snmp_test_lib:init_suite_top_dir(?MODULE, Config0),
+ Config2 = snmp_test_lib:fix_data_dir(Config1),
+
+ %% Mib-dirs
+ %% data_dir is trashed by the test-server / common-test
+ %% so there is no point in fixing it...
+ MibDir = snmp_test_lib:lookup(data_dir, Config2),
+ StdMibDir = filename:join([code:priv_dir(snmp), "mibs"]),
+
+ [{mib_dir, MibDir}, {std_mib_dir, StdMibDir} | Config2].
+
+end_per_suite(Config) when is_list(Config) ->
+
+ ?DBG("end_per_suite -> entry with"
+ "~n Config: ~p", [Config]),
+
+ Config.
+
+
+init_per_testcase(Case, Config) when is_list(Config) ->
+
+ ?DBG("init_per_testcase -> entry with"
+ "~n Config: ~p", [Config]),
+
+ CaseTopDir = snmp_test_lib:init_testcase_top_dir(Case, Config),
+
+ [{case_top_dir, CaseTopDir} | Config].
end_per_testcase(_Case, Config) when is_list(Config) ->
- CompDir = ?config(comp_dir, Config),
- ?line ok = ?DEL_DIR(CompDir),
- lists:keydelete(comp_dir, 1, Config).
+ Config.
%%======================================================================
@@ -102,6 +127,7 @@ all() ->
agent_capabilities,
module_compliance,
warnings_as_errors,
+ augments_extra_info,
{group, tickets}
].
@@ -126,7 +152,7 @@ description(Config) when is_list(Config) ->
put(tname,desc),
p("starting with Config: ~p~n", [Config]),
- Dir = ?config(comp_dir, Config),
+ Dir = ?config(case_top_dir, Config),
Filename = join(Dir,"test"),
MibSrcName = Filename ++ ".mib",
MibBinName = Filename ++ ".bin",
@@ -161,7 +187,7 @@ oid_conflicts(Config) when is_list(Config) ->
put(tname,oid_conflicts),
p("starting with Config: ~p~n", [Config]),
- Dir = ?config(comp_dir, Config),
+ Dir = ?config(case_top_dir, Config),
Mib = join(Dir,"TESTv2.mib"),
?line ok = write_oid_conflict_mib(Mib),
?line {error,compilation_failed} =
@@ -278,7 +304,7 @@ warnings_as_errors(suite) ->
warnings_as_errors(Config) when is_list(Config) ->
put(tname,warnings_as_errors),
p("starting with Config: ~p~n", [Config]),
- Dir = ?config(comp_dir, Config),
+ Dir = ?config(case_top_dir, Config),
MibDir = ?config(mib_dir, Config),
MibFile = join(MibDir, "OTP8574-MIB.mib"),
OutFile = join(Dir, "OTP8574-MIB.bin"),
@@ -303,7 +329,7 @@ otp_6150(Config) when is_list(Config) ->
put(tname,otp_6150),
p("starting with Config: ~p~n", [Config]),
- Dir = ?config(comp_dir, Config),
+ Dir = ?config(case_top_dir, Config),
MibDir = ?config(mib_dir, Config),
MibFile = join(MibDir, "ERICSSON-TOP-MIB.mib"),
?line {ok, Mib} = snmpc:compile(MibFile, [{outdir, Dir}, {verbosity, trace}]),
@@ -319,7 +345,7 @@ otp_8574(Config) when is_list(Config) ->
put(tname,otp_8574),
p("starting with Config: ~p~n", [Config]),
- Dir = ?config(comp_dir, Config),
+ Dir = ?config(case_top_dir, Config),
MibDir = ?config(mib_dir, Config),
MibFile = join(MibDir, "OTP8574-MIB.mib"),
@@ -352,7 +378,7 @@ otp_8595(Config) when is_list(Config) ->
put(tname,otp_8595),
p("starting with Config: ~p~n", [Config]),
- Dir = ?config(comp_dir, Config),
+ Dir = ?config(case_top_dir, Config),
MibDir = ?config(mib_dir, Config),
MibFile = join(MibDir, "OTP8595-MIB.mib"),
?line {ok, Mib} =
@@ -364,6 +390,47 @@ otp_8595(Config) when is_list(Config) ->
%%======================================================================
+
+augments_extra_info(suite) ->
+ [];
+augments_extra_info(Config) when is_list(Config) ->
+ put(tname, augments_extra_info),
+ p("starting with Config: ~p~n", [Config]),
+
+ Dir = ?config(case_top_dir, Config),
+ MibDir = ?config(mib_dir, Config),
+ Test2File = join(MibDir, "Test2.mib"),
+ Test3File = join(MibDir, "Test3.mib"),
+ ?line {ok, Test2BinFile} =
+ snmpc:compile(Test2File, [{outdir, Dir},
+ {verbosity, silence},
+ {group_check, false}]),
+ io:format("Test2BinFile: ~n~p~n", [Test2BinFile]),
+ ?line {ok, Test3BinFile} =
+ snmpc:compile(Test3File, [{i, [MibDir]},
+ {outdir, Dir},
+ {verbosity, silence},
+ {group_check, true}]),
+ io:format("Test3BinFile: ~n~p~n", [Test3BinFile]),
+ {ok, Test3Mib} = snmp_misc:read_mib(Test3BinFile),
+ io:format("Test3Mib: ~n~p~n", [Test3Mib]),
+ %% There is only one table in this mib
+ #mib{table_infos = [{TableName, TI}]} = Test3Mib,
+ io:format("TableName: ~p"
+ "~n Table Info: ~p"
+ "~n", [TableName, TI]),
+ #table_info{nbr_of_cols = 4,
+ defvals = DefVals,
+ not_accessible = [2,4],
+ index_types = {augments, {tEntry, undefined}},
+ first_accessible = 1} = TI,
+ io:format("Table info: ~p"
+ "~n DefVals: ~p"
+ "~n", [TableName, DefVals]),
+ ok.
+
+
+%%======================================================================
%% Internal functions
%%======================================================================
@@ -517,11 +584,11 @@ DESCRIPTION \"" ++ Desc ++ "\"
::= { test 1 }
END",
- Message = file:write_file(Filename ,Binary),
+ Message = file:write_file(Filename, Binary),
case Message of
ok -> ok;
{error, Reason} ->
- exit({failed_writing_mib,Reason})
+ exit({failed_writing_mib, Reason})
end.
@@ -546,8 +613,8 @@ check_desc(Desc1, Desc2) ->
exit({'description not equal', Desc1, Desc2}).
-join(Comp) ->
- filename:join(Comp).
+%% join(Comp) ->
+%% filename:join(Comp).
join(A,B) ->
filename:join(A,B).
diff --git a/lib/snmp/test/snmp_log_test.erl b/lib/snmp/test/snmp_log_test.erl
index b692017407..8478825f59 100644
--- a/lib/snmp/test/snmp_log_test.erl
+++ b/lib/snmp/test/snmp_log_test.erl
@@ -42,7 +42,11 @@
-export([
init_per_testcase/2, end_per_testcase/2,
- all/0,groups/0,init_per_group/2,end_per_group/2,
+ all/0,
+ groups/0,
+ init_per_group/2,
+ end_per_group/2,
+
open_and_close/1,
open_write_and_close1/1,
@@ -109,16 +113,21 @@ end_per_testcase(_Case, Config) when is_list(Config) ->
%%======================================================================
%% ?SKIP(not_yet_implemented).
all() ->
-[open_and_close, {group, open_write_and_close},
- {group, log_to_io}, {group, log_to_txt}].
+ [
+ open_and_close,
+ {group, open_write_and_close},
+ {group, log_to_io},
+ {group, log_to_txt}].
groups() ->
- [{open_write_and_close, [],
- [open_write_and_close1, open_write_and_close2,
- open_write_and_close3, open_write_and_close4]},
- {log_to_io, [], [log_to_io1, log_to_io2]},
- {log_to_txt, [],
- [log_to_txt1, log_to_txt2, log_to_txt3]}].
+ [
+ {open_write_and_close, [],
+ [open_write_and_close1, open_write_and_close2,
+ open_write_and_close3, open_write_and_close4]},
+ {log_to_io, [], [log_to_io1, log_to_io2]},
+ {log_to_txt, [],
+ [log_to_txt1, log_to_txt2, log_to_txt3]}
+ ].
init_per_group(_GroupName, Config) ->
Config.
diff --git a/lib/snmp/test/snmp_manager_test.erl b/lib/snmp/test/snmp_manager_test.erl
index 75c9f7b277..c374a2f0a6 100644
--- a/lib/snmp/test/snmp_manager_test.erl
+++ b/lib/snmp/test/snmp_manager_test.erl
@@ -49,6 +49,8 @@
init_per_group/2, end_per_group/2,
init_per_testcase/2, end_per_testcase/2,
+ init_per_suite/1, end_per_suite/1,
+
simple_start_and_stop1/1,
simple_start_and_stop2/1,
@@ -146,36 +148,43 @@
%% External functions
%%======================================================================
+init_per_suite(Config0) when is_list(Config0) ->
+
+ ?DBG("init_per_suite -> entry with"
+ "~n Config0: ~p", [Config0]),
+
+ Config1 = snmp_test_lib:init_suite_top_dir(?MODULE, Config0),
+ Config2 = snmp_test_lib:fix_data_dir(Config1),
+
+ %% Mib-dirs
+ %% data_dir is trashed by the test-server / common-test
+ %% so there is no point in fixing it...
+ MibDir = snmp_test_lib:lookup(data_dir, Config2),
+ StdMibDir = filename:join([code:priv_dir(snmp), "mibs"]),
+
+ [{mib_dir, MibDir}, {std_mib_dir, StdMibDir} | Config2].
+
+end_per_suite(Config) when is_list(Config) ->
+
+ ?DBG("end_per_suite -> entry with"
+ "~n Config: ~p", [Config]),
+
+ Config.
+
+
init_per_testcase(Case, Config) when is_list(Config) ->
io:format(user, "~n~n*** INIT ~w:~w ***~n~n", [?MODULE,Case]),
init_per_testcase2(Case, Config).
init_per_testcase2(Case, Config) ->
- ?DBG("init [~w] Nodes [1]: ~p", [Case, erlang:nodes()]),
-
- %% Fix a correct data dir (points to the wrong location):
- DataDir0 = ?config(data_dir, Config),
- DataDir1 = filename:split(filename:absname(DataDir0)),
- [_|DataDir2] = lists:reverse(DataDir1),
- DataDir = filename:join(lists:reverse(DataDir2) ++ [?snmp_test_data]),
+ ?DBG("init_per_testcase2 -> ~p", [erlang:nodes()]),
- PrivDir = ?config(priv_dir, Config),
+ CaseTopDir = snmp_test_lib:init_testcase_top_dir(Case, Config),
- TopDir = filename:join(PrivDir, ?MODULE),
- case file:make_dir(TopDir) of
- ok ->
- ok;
- {error, eexist} ->
- ok;
- Error ->
- ?FAIL({failed_creating_subsuite_top_dir, Error})
- end,
-
- CaseTopDir = filename:join(TopDir, Case),
- ?line ok = file:make_dir(CaseTopDir),
-
%% -- Manager dirs --
- MgrTopDir = filename:join(CaseTopDir, "manager/"),
+ MgrTopDir = filename:join(CaseTopDir, "manager/"),
+ ?DBG("init_per_testcase2 -> try create manager top dir: ~n~p",
+ [MgrTopDir]),
?line ok = file:make_dir(MgrTopDir),
MgrConfDir = filename:join(MgrTopDir, "conf/"),
@@ -200,10 +209,9 @@ init_per_testcase2(Case, Config) ->
AgLogDir = filename:join(AgTopDir, "log/"),
?line ok = file:make_dir(AgLogDir),
- Conf = [{snmp_data_dir, DataDir},
- {watchdog, ?WD_START(?MINS(5))},
+ Conf = [{watchdog, ?WD_START(?MINS(5))},
{ip, ?LOCALHOST()},
- {top_dir, TopDir},
+ {case_top_dir, CaseTopDir},
{agent_dir, AgTopDir},
{agent_conf_dir, AgConfDir},
{agent_db_dir, AgDbDir},
@@ -388,9 +396,11 @@ all() ->
{group, user_tests},
{group, agent_tests},
{group, request_tests},
+ {group, request_tests_mt},
{group, event_tests},
+ {group, event_tests_mt},
discovery,
- {group, tickets}
+ {group, tickets}
].
groups() ->
@@ -431,6 +441,15 @@ groups() ->
{group, misc_request_tests}
]
},
+ {request_tests_mt, [],
+ [
+ {group, get_tests},
+ {group, get_next_tests},
+ {group, set_tests},
+ {group, bulk_tests},
+ {group, misc_request_tests}
+ ]
+ },
{get_tests, [],
[
simple_sync_get1,
@@ -477,18 +496,30 @@ groups() ->
misc_async2
]
},
- {event_tests, [],
- [
- trap1%% ,
- %% trap2,
- %% inform1,
- %% inform2,
- %% inform3,
- %% inform4,
- %% inform_swarm,
- %% report
- ]
- },
+ {event_tests, [],
+ [
+ trap1,
+ trap2,
+ inform1,
+ inform2,
+ inform3,
+ inform4,
+ inform_swarm,
+ report
+ ]
+ },
+ {event_tests_mt, [],
+ [
+ trap1,
+ trap2,
+ inform1,
+ inform2,
+ inform3,
+ inform4,
+ inform_swarm,
+ report
+ ]
+ },
{tickets, [],
[
{group, otp8015},
@@ -507,11 +538,21 @@ groups() ->
}
].
-init_per_group(_GroupName, Config) ->
- Config.
+init_per_group(request_tests_mt = GroupName, Config) ->
+ snmp_test_lib:init_group_top_dir(
+ GroupName,
+ [{manager_net_if_module, snmpm_net_if_mt} | Config]);
+init_per_group(event_tests_mt = GroupName, Config) ->
+ snmp_test_lib:init_group_top_dir(
+ GroupName,
+ [{manager_net_if_module, snmpm_net_if_mt} | Config]);
+init_per_group(GroupName, Config) ->
+ snmp_test_lib:init_group_top_dir(GroupName, Config).
+
end_per_group(_GroupName, Config) ->
- Config.
+ %% Do we really need to do this?
+ lists:keydelete(snmp_group_top_dir, 1, Config).
%%======================================================================
@@ -1571,6 +1612,11 @@ simple_sync_get1(Config) when is_list(Config) ->
?line ok = mgr_user_load_mib(Node, std_mib()),
Oids2 = [[sysObjectID, 0], [sysDescr, 0], [sysUpTime, 0]],
?line ok = do_simple_sync_get(Node, Addr, Port, Oids2),
+
+ p("Display log"),
+ display_log(Config),
+
+ p("done"),
ok.
do_simple_sync_get(Node, Addr, Port, Oids) ->
@@ -1578,7 +1624,7 @@ do_simple_sync_get(Node, Addr, Port, Oids) ->
?DBG("~n Reply: ~p"
"~n Rem: ~w", [Reply, Rem]),
-
+
%% verify that the operation actually worked:
%% The order should be the same, so no need to seach
?line ok = case Reply of
@@ -1612,7 +1658,9 @@ simple_sync_get2(suite) -> [];
simple_sync_get2(Config) when is_list(Config) ->
process_flag(trap_exit, true),
put(tname, ssg2),
- do_simple_sync_get2(Config).
+ do_simple_sync_get2(Config),
+ display_log(Config),
+ ok.
do_simple_sync_get2(Config) ->
Get = fun(Node, TargetName, Oids) ->
@@ -1677,7 +1725,9 @@ simple_sync_get3(suite) -> [];
simple_sync_get3(Config) when is_list(Config) ->
process_flag(trap_exit, true),
put(tname, ssg3),
- do_simple_sync_get3(Config).
+ do_simple_sync_get3(Config),
+ display_log(Config),
+ ok.
do_simple_sync_get3(Config) ->
Self = self(),
@@ -1703,8 +1753,8 @@ do_simple_sync_get3(Config) ->
%%======================================================================
-simple_async_get1(doc) -> ["Simple (async) get-request - "
- "Old style (Addr & Port)"];
+simple_async_get1(doc) ->
+ ["Simple (async) get-request - Old style (Addr & Port)"];
simple_async_get1(suite) -> [];
simple_async_get1(Config) when is_list(Config) ->
process_flag(trap_exit, true),
@@ -1766,6 +1816,7 @@ simple_async_get1(Config) when is_list(Config) ->
p("manager info when ending test: ~n~p", [mgr_info(MgrNode)]),
p("agent info when ending test: ~n~p", [agent_info(AgentNode)]),
+ display_log(Config),
ok.
async_g_exec1(Node, Addr, Port, Oids) ->
@@ -1816,7 +1867,9 @@ simple_async_get2(Config) when is_list(Config) ->
TargetName = ?config(manager_agent_target_name, Config),
Get = fun(Oids) -> async_g_exec2(MgrNode, TargetName, Oids) end,
PostVerify = fun(Res) -> Res end,
- do_simple_async_sync_get2(Config, MgrNode, AgentNode, Get, PostVerify).
+ do_simple_async_sync_get2(Config, MgrNode, AgentNode, Get, PostVerify),
+ display_log(Config),
+ ok.
do_simple_async_sync_get2(Config, MgrNode, AgentNode, Get, PostVerify) ->
?line ok = mgr_user_load_mib(MgrNode, std_mib()),
@@ -1905,7 +1958,9 @@ simple_async_get3(Config) when is_list(Config) ->
PostVerify = fun(ok) -> receive Msg -> ok end;
(Error) -> Error
end,
- do_simple_async_sync_get2(Config, MgrNode, AgentNode, Get, PostVerify).
+ do_simple_async_sync_get2(Config, MgrNode, AgentNode, Get, PostVerify),
+ display_log(Config),
+ ok.
async_g_exec3(Node, TargetName, Oids, SendOpts) ->
mgr_user_async_get2(Node, TargetName, Oids, SendOpts).
@@ -1999,6 +2054,8 @@ simple_sync_get_next1(Config) when is_list(Config) ->
end,
?line ok = do_simple_get_next(8,
MgrNode, Addr, Port, Oids08, VF08),
+
+ display_log(Config),
ok.
@@ -2062,7 +2119,10 @@ simple_sync_get_next2(Config) when is_list(Config) ->
mgr_user_sync_get_next(Node, TargetName, Oids)
end,
PostVerify = fun(Res) -> Res end,
- do_simple_sync_get_next2(Config, GetNext, PostVerify).
+ do_simple_sync_get_next2(Config, GetNext, PostVerify),
+ display_log(Config),
+ ok.
+
do_simple_sync_get_next2(Config, GetNext, PostVerify)
when is_function(GetNext, 3) andalso is_function(PostVerify, 1) ->
@@ -2193,7 +2253,9 @@ simple_sync_get_next3(Config) when is_list(Config) ->
PostVerify = fun(ok) -> receive Msg -> ok end;
(Error) -> Error
end,
- do_simple_sync_get_next2(Config, GetNext, PostVerify).
+ do_simple_sync_get_next2(Config, GetNext, PostVerify),
+ display_log(Config),
+ ok.
%%======================================================================
@@ -2286,6 +2348,7 @@ simple_async_get_next1(Config) when is_list(Config) ->
p("manager info when ending test: ~n~p", [mgr_info(MgrNode)]),
p("agent info when ending test: ~n~p", [agent_info(AgentNode)]),
+ display_log(Config),
ok.
@@ -2315,7 +2378,9 @@ simple_async_get_next2(Config) when is_list(Config) ->
async_gn_exec2(MgrNode, TargetName, Oids)
end,
PostVerify = fun(Res) -> Res end,
- do_simple_async_get_next2(MgrNode, AgentNode, GetNext, PostVerify).
+ do_simple_async_get_next2(MgrNode, AgentNode, GetNext, PostVerify),
+ display_log(Config),
+ ok.
do_simple_async_get_next2(MgrNode, AgentNode, GetNext, PostVerify)
when is_function(GetNext, 1) andalso is_function(PostVerify, 1) ->
@@ -2437,7 +2502,9 @@ simple_async_get_next3(Config) when is_list(Config) ->
(Error) -> Error
end,
- do_simple_async_get_next2(MgrNode, AgentNode, GetNext, PostVerify).
+ do_simple_async_get_next2(MgrNode, AgentNode, GetNext, PostVerify),
+ display_log(Config),
+ ok.
async_gn_exec3(Node, TargetName, Oids, SendOpts) ->
mgr_user_async_get_next2(Node, TargetName, Oids, SendOpts).
@@ -2475,6 +2542,8 @@ simple_sync_set1(Config) when is_list(Config) ->
{[sysLocation, 0], Val22}
],
?line ok = do_simple_set1(Node, Addr, Port, VAVs2),
+
+ display_log(Config),
ok.
do_simple_set1(Node, Addr, Port, VAVs) ->
@@ -2527,7 +2596,9 @@ simple_sync_set2(Config) when is_list(Config) ->
end,
PostVerify = fun() -> ok end,
- do_simple_sync_set2(Config, Set, PostVerify).
+ do_simple_sync_set2(Config, Set, PostVerify),
+ display_log(Config),
+ ok.
do_simple_sync_set2(Config, Set, PostVerify)
when is_function(Set, 3) andalso is_function(PostVerify, 0) ->
@@ -2604,7 +2675,9 @@ simple_sync_set3(Config) when is_list(Config) ->
end,
PostVerify = fun() -> receive Msg -> ok end end,
- do_simple_sync_set2(Config, Set, PostVerify).
+ do_simple_sync_set2(Config, Set, PostVerify),
+ display_log(Config),
+ ok.
%%======================================================================
@@ -2663,6 +2736,7 @@ simple_async_set1(Config) when is_list(Config) ->
p("manager info when ending test: ~n~p", [mgr_info(MgrNode)]),
p("agent info when ending test: ~n~p", [agent_info(AgentNode)]),
+ display_log(Config),
ok.
@@ -2724,7 +2798,9 @@ simple_async_set2(Config) when is_list(Config) ->
end,
PostVerify = fun(Res) -> Res end,
- do_simple_async_set2(MgrNode, AgentNode, Set, PostVerify).
+ do_simple_async_set2(MgrNode, AgentNode, Set, PostVerify),
+ display_log(Config),
+ ok.
do_simple_async_set2(MgrNode, AgentNode, Set, PostVerify) ->
Requests =
@@ -2806,7 +2882,9 @@ simple_async_set3(Config) when is_list(Config) ->
(Res) -> Res
end,
- do_simple_async_set2(MgrNode, AgentNode, Set, PostVerify).
+ do_simple_async_set2(MgrNode, AgentNode, Set, PostVerify),
+ display_log(Config),
+ ok.
async_s_exec3(Node, TargetName, VAVs, SendOpts) ->
mgr_user_async_set2(Node, TargetName, VAVs, SendOpts).
@@ -2932,6 +3010,7 @@ simple_sync_get_bulk1(Config) when is_list(Config) ->
0, 2,
[[TCnt2, 1]], VF11),
+ display_log(Config),
ok.
fl(L) ->
@@ -3004,7 +3083,9 @@ simple_sync_get_bulk2(Config) when is_list(Config) ->
end,
PostVerify = fun(Res) -> Res end,
- do_simple_sync_get_bulk2(Config, MgrNode, AgentNode, GetBulk, PostVerify).
+ do_simple_sync_get_bulk2(Config, MgrNode, AgentNode, GetBulk, PostVerify),
+ display_log(Config),
+ ok.
do_simple_sync_get_bulk2(Config, MgrNode, AgentNode, GetBulk, PostVerify) ->
%% -- 1 --
@@ -3169,7 +3250,9 @@ simple_sync_get_bulk3(Config) when is_list(Config) ->
(Res) -> Res
end,
- do_simple_sync_get_bulk2(Config, MgrNode, AgentNode, GetBulk, PostVerify).
+ do_simple_sync_get_bulk2(Config, MgrNode, AgentNode, GetBulk, PostVerify),
+ display_log(Config),
+ ok.
%%======================================================================
@@ -3308,6 +3391,7 @@ simple_async_get_bulk1(Config) when is_list(Config) ->
p("manager info when ending test: ~n~p", [mgr_info(MgrNode)]),
p("agent info when ending test: ~n~p", [agent_info(AgentNode)]),
+ display_log(Config),
ok.
@@ -3340,7 +3424,9 @@ simple_async_get_bulk2(Config) when is_list(Config) ->
end,
PostVerify = fun(Res) -> Res end,
- do_simple_async_get_bulk2(MgrNode, AgentNode, GetBulk, PostVerify).
+ do_simple_async_get_bulk2(MgrNode, AgentNode, GetBulk, PostVerify),
+ display_log(Config),
+ ok.
do_simple_async_get_bulk2(MgrNode, AgentNode, GetBulk, PostVerify) ->
%% We re-use the verification functions from the ssgb test-case
@@ -3505,7 +3591,9 @@ simple_async_get_bulk3(Config) when is_list(Config) ->
(Res) -> Res
end,
- do_simple_async_get_bulk2(MgrNode, AgentNode, GetBulk, PostVerify).
+ do_simple_async_get_bulk2(MgrNode, AgentNode, GetBulk, PostVerify),
+ display_log(Config),
+ ok.
async_gb_exec3(Node, TargetName, {NR, MR, Oids}, SendOpts) ->
mgr_user_async_get_bulk2(Node, TargetName, NR, MR, Oids, SendOpts).
@@ -3697,6 +3785,7 @@ misc_async1(Config) when is_list(Config) ->
p("manager info when ending test: ~n~p", [mgr_info(MgrNode)]),
p("agent info when ending test: ~n~p", [agent_info(AgentNode)]),
+ display_log(Config),
ok.
@@ -3885,6 +3974,7 @@ misc_async2(Config) when is_list(Config) ->
p("manager info when ending test: ~n~p", [mgr_info(MgrNode)]),
p("agent info when ending test: ~n~p", [agent_info(AgentNode)]),
+ display_log(Config),
ok.
@@ -4099,7 +4189,9 @@ trap1(Config) when is_list(Config) ->
{5, "Manager and agent info after test completion", Cmd1}
],
- command_handler(Commands).
+ command_handler(Commands),
+ display_log(Config),
+ ok.
%%======================================================================
@@ -4290,7 +4382,9 @@ trap2(Config) when is_list(Config) ->
{7, "Manager and agent info after test completion", Cmd1}
],
- command_handler(Commands).
+ command_handler(Commands),
+ display_log(Config),
+ ok.
%%======================================================================
@@ -4415,7 +4509,9 @@ inform1(Config) when is_list(Config) ->
{6, "Manager and agent info after test completion", Cmd1}
],
- command_handler(Commands).
+ command_handler(Commands),
+ display_log(Config),
+ ok.
%%======================================================================
@@ -4423,7 +4519,7 @@ inform1(Config) when is_list(Config) ->
inform2(suite) -> [];
inform2(Config) when is_list(Config) ->
process_flag(trap_exit, true),
- put(tname,i2),
+ put(tname, i2),
p("starting with Config: ~p~n", [Config]),
MgrNode = ?config(manager_node, Config),
@@ -4577,7 +4673,7 @@ inform2(Config) when is_list(Config) ->
[
{1, "Manager and agent info at start of test", Cmd1},
{2, "Send notifcation [no receiver] from agent", Cmd2},
- {3, "await inform-sent acknowledge from agent", Cmd3},
+ {3, "Await inform-sent acknowledge from agent", Cmd3},
{4, "Await first inform to manager - do not reply", Cmd4},
{5, "Await second inform to manager - reply", Cmd5},
{6, "await inform-acknowledge from agent", Cmd6},
@@ -4585,7 +4681,9 @@ inform2(Config) when is_list(Config) ->
{8, "Manager and agent info after test completion", Cmd1}
],
- command_handler(Commands).
+ command_handler(Commands),
+ display_log(Config),
+ ok.
%%======================================================================
@@ -4719,7 +4817,9 @@ inform3(Config) when is_list(Config) ->
{9, "Manager and agent info after test completion", Cmd1}
],
- command_handler(Commands).
+ command_handler(Commands),
+ display_log(Config),
+ ok.
%%======================================================================
@@ -4835,7 +4935,9 @@ inform4(Config) when is_list(Config) ->
{6, "Manager and agent info after test completion", Cmd1}
],
- command_handler(Commands).
+ command_handler(Commands),
+ display_log(Config),
+ ok.
%%======================================================================
@@ -4923,7 +5025,10 @@ inform_swarm(Config) when is_list(Config) ->
{5, "Manager and agent info after test completion", Cmd1}
],
- command_handler(Commands).
+ command_handler(Commands),
+ display_log(Config),
+ ok.
+
inform_swarm_collector(N) ->
inform_swarm_collector(N, 0, 0, 0, 10000).
@@ -5227,8 +5332,8 @@ init_agent(Config) ->
%% --
%% Retrieve some dir's
%%
- Dir = ?config(top_dir, Config),
- DataDir = ?config(data_dir, Config),
+ Dir = ?config(agent_dir, Config),
+ MibDir = ?config(mib_dir, Config),
%% --
%% Start node
@@ -5259,7 +5364,7 @@ init_agent(Config) ->
?line ok = write_agent_config(Vsns, Config),
Conf = [{agent_node, Node},
- {mib_dir, DataDir} | Config],
+ {mib_dir, MibDir} | Config],
%%
%% Start the agent
@@ -5720,6 +5825,15 @@ start_manager(Node, Vsns, Conf0, Opts) ->
AtlSeqNo = get_opt(manager_atl_seqno, Conf0, false),
+ NetIfConf =
+ case get_opt(manager_net_if_module, Conf0, no_module) of
+ no_module ->
+ [{verbosity, NetIfVerbosity}];
+ NetIfModule ->
+ [{module, NetIfModule},
+ {verbosity, NetIfVerbosity}]
+ end,
+
Env = [{versions, Vsns},
{inform_request_behaviour, IRB},
{audit_trail_log, [{type, read_write},
@@ -5732,7 +5846,7 @@ start_manager(Node, Vsns, Conf0, Opts) ->
{verbosity, ConfigVerbosity}]},
{note_store, [{verbosity, NoteStoreVerbosity}]},
{server, [{verbosity, ServerVerbosity}]},
- {net_if, [{verbosity, NetIfVerbosity}]}],
+ {net_if, NetIfConf}],
?line ok = set_mgr_env(Node, Env),
?line ok = start_snmp(Node),
@@ -6018,6 +6132,38 @@ write_conf_file(Dir, File, Str) ->
%% ------
+display_log(Config) ->
+ case lists:keysearch(manager_log_dir, 1, Config) of
+ {value, {_, Dir}} ->
+ case lists:keysearch(manager_node, 1, Config) of
+ {value, {_, Node}} ->
+ LogDir = Dir,
+ Mibs = [],
+ OutFile = j(LogDir, "snmpm_log.txt"),
+ p("~n"
+ "========================="
+ " < Audit Trail Log > "
+ "========================="
+ "~n"),
+ rcall(Node, snmpm, log_to_txt, [LogDir, Mibs, OutFile]),
+ rcall(Node, snmpm, log_to_io, [LogDir, Mibs]),
+ p("~n"
+ "========================="
+ " < / Audit Trail Log > "
+ "========================="
+ "~n");
+ false ->
+ p("display_log -> no manager node found"),
+ ok
+ end;
+ false ->
+ p("display_log -> no manager log dir found"),
+ ok
+ end.
+
+
+%% ------
+
test2_mib(Config) ->
j(test_mib_dir(Config), "Test2.bin").
@@ -6034,7 +6180,7 @@ snmpv2_mib() ->
j(mib_dir(), "SNMPv2-MIB.bin").
test_mib_dir(Config) ->
- ?config(snmp_data_dir, Config).
+ ?config(mib_dir, Config).
mib_dir() ->
j(code:priv_dir(snmp), "mibs").
diff --git a/lib/snmp/test/snmp_test_data/Test3.mib b/lib/snmp/test/snmp_test_data/Test3.mib
new file mode 100644
index 0000000000..7f76e4dba4
--- /dev/null
+++ b/lib/snmp/test/snmp_test_data/Test3.mib
@@ -0,0 +1,123 @@
+Test3 DEFINITIONS ::= BEGIN
+
+IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, Integer32, snmpModules, mib-2
+ FROM SNMPv2-SMI
+ MODULE-COMPLIANCE, OBJECT-GROUP
+ FROM SNMPv2-CONF
+ tEntry
+ FROM Test2;
+
+t3MIB MODULE-IDENTITY
+ LAST-UPDATED "1203090000Z"
+ ORGANIZATION ""
+ CONTACT-INFO
+ ""
+ DESCRIPTION
+ "Test mib, used to test processing of requests."
+ ::= { snmpModules 42 }
+
+
+-- Administrative assignments ****************************************
+
+t3MIBObjects OBJECT IDENTIFIER ::= { t3MIB 1 }
+t3MIBConformance OBJECT IDENTIFIER ::= { t3MIB 2 }
+
+
+-- test4 OBJECT IDENTIFIER ::= { mib-2 18 }
+
+tAugTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF TAugEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "This table AUGMENTS tTable of the Test2 MIB."
+ ::= { t3MIBObjects 1 }
+
+tAugEntry OBJECT-TYPE
+ SYNTAX TAugEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An entry (conceptual row) in the sysORTable."
+ AUGMENTS { tEntry }
+ ::= { tAugTable 1 }
+
+TAugEntry ::= SEQUENCE {
+ tFoo1 OCTET STRING,
+ tFoo2 OCTET STRING,
+ tBar1 Integer32,
+ tBar2 Integer32
+}
+
+tFoo1 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..255))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A string."
+ DEFVAL { "foo 1" }
+ ::= { tAugEntry 1 }
+
+tFoo2 OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..255))
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A string."
+ DEFVAL { "foo 2" }
+ ::= { tAugEntry 2 }
+
+tBar1 OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "An integer."
+ DEFVAL { 42 }
+ ::= { tAugEntry 3 }
+
+tBar2 OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An integer."
+ DEFVAL { 42 }
+ ::= { tAugEntry 4 }
+
+
+-- Conformance Information *******************************************
+
+t3MIBCompliances OBJECT IDENTIFIER
+ ::= { t3MIBConformance 1 }
+t3MIBGroups OBJECT IDENTIFIER
+ ::= { t3MIBConformance 2 }
+
+-- Compliance statements
+
+t3MIBCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The compliance statement for SNMP engines which
+ implement the SNMP-COMMUNITY-MIB."
+
+ MODULE -- this module
+ MANDATORY-GROUPS { t3Group }
+
+ ::= { t3MIBCompliances 1 }
+
+t3Group OBJECT-GROUP
+ OBJECTS {
+ tFoo1,
+ tFoo2,
+ tBar1,
+ tBar2
+ }
+ STATUS current
+ DESCRIPTION
+ "A group."
+ ::= { t3MIBGroups 1 }
+
+
+END
diff --git a/lib/snmp/test/snmp_test_lib.erl b/lib/snmp/test/snmp_test_lib.erl
index e4d58a1253..26115a0c74 100644
--- a/lib/snmp/test/snmp_test_lib.erl
+++ b/lib/snmp/test/snmp_test_lib.erl
@@ -25,7 +25,10 @@
-export([hostname/0, hostname/1, localhost/0, os_type/0, sz/1,
display_suite_info/1]).
-export([non_pc_tc_maybe_skip/4, os_based_skip/1]).
--export([replace_config/3, set_config/3, get_config/2, get_config/3]).
+-export([fix_data_dir/1,
+ init_suite_top_dir/2, init_group_top_dir/2, init_testcase_top_dir/2,
+ lookup/2,
+ replace_config/3, set_config/3, get_config/2, get_config/3]).
-export([fail/3, skip/3]).
-export([millis/0, millis_diff/2, hours/1, minutes/1, seconds/1, sleep/1]).
-export([flush_mqueue/0, trap_exit/0, trap_exit/1]).
@@ -198,6 +201,97 @@ os_based_skip(_Crap) ->
%% Test suite utility functions
%%
+fix_data_dir(Config) ->
+ DataDir0 = lookup(data_dir, Config),
+ DataDir1 = filename:split(filename:absname(DataDir0)),
+ [_|DataDir2] = lists:reverse(DataDir1),
+ DataDir = filename:join(lists:reverse(DataDir2) ++ [?snmp_test_data]),
+ Config1 = lists:keydelete(data_dir, 1, Config),
+ [{data_dir, DataDir ++ "/"} | Config1].
+
+
+init_suite_top_dir(Suite, Config0) ->
+ io:format("~w:init_suite_top_dir -> entry with"
+ "~n Suite: ~p"
+ "~n Config0: ~p"
+ "~n", [?MODULE, Suite, Config0]),
+ Dir = lookup(priv_dir, Config0),
+ SuiteTopDir = filename:join(Dir, Suite),
+ case file:make_dir(SuiteTopDir) of
+ ok ->
+ ok;
+ {error, eexist} ->
+ ok;
+ {error, Reason} ->
+ fail({failed_creating_suite_top_dir, SuiteTopDir, Reason},
+ ?MODULE, ?LINE)
+ end,
+
+ %% This is just in case...
+ Config1 = lists:keydelete(snmp_group_top_dir, 1, Config0),
+ Config2 = lists:keydelete(snmp_suite_top_dir, 1, Config1),
+ [{snmp_suite_top_dir, SuiteTopDir} | Config2].
+
+
+init_group_top_dir(GroupName, Config) ->
+ io:format("~w:init_group_top_dir -> entry with"
+ "~n GroupName: ~p"
+ "~n Config: ~p"
+ "~n", [?MODULE, GroupName, Config]),
+ case lists:keysearch(snmp_group_top_dir, 1, Config) of
+ {value, {_Key, Dir}} ->
+ %% This is a sub-group, so create our dir within Dir
+ GroupTopDir = filename:join(Dir, GroupName),
+ case file:make_dir(GroupTopDir) of
+ ok ->
+ ok;
+ {error, Reason} ->
+ fail({failed_creating_group_top_dir, GroupTopDir, Reason},
+ ?MODULE, ?LINE)
+ end,
+ [{snmp_group_top_dir, GroupTopDir} | Config];
+
+ _ ->
+ case lists:keysearch(snmp_suite_top_dir, 1, Config) of
+ {value, {_Key, Dir}} ->
+ GroupTopDir = filename:join(Dir, GroupName),
+ case file:make_dir(GroupTopDir) of
+ ok ->
+ ok;
+ {error, Reason} ->
+ fail({failed_creating_group_top_dir,
+ GroupTopDir, Reason},
+ ?MODULE, ?LINE)
+ end,
+ [{snmp_group_top_dir, GroupTopDir} | Config];
+ _ ->
+ fail(could_not_find_suite_top_dir, ?MODULE, ?LINE)
+ end
+ end.
+
+
+init_testcase_top_dir(Case, Config) ->
+ io:format("~w:init_testcase_top_dir -> entry with"
+ "~n Case: ~p"
+ "~n Config: ~p"
+ "~n", [?MODULE, Case, Config]),
+ case lists:keysearch(snmp_group_top_dir, 1, Config) of
+ {value, {_Key, Dir}} ->
+ CaseTopDir = filename:join(Dir, Case),
+ ok = file:make_dir(CaseTopDir),
+ CaseTopDir;
+ false ->
+ case lists:keysearch(snmp_suite_top_dir, 1, Config) of
+ {value, {_Key, Dir}} ->
+ CaseTopDir = filename:join(Dir, Case),
+ ok = file:make_dir(CaseTopDir),
+ CaseTopDir;
+ false ->
+ fail(failed_creating_case_top_dir, ?MODULE, ?LINE)
+ end
+ end.
+
+
replace_config(Key, Config, NewValue) ->
lists:keyreplace(Key, 1, Config, {Key, NewValue}).
@@ -220,6 +314,9 @@ get_config(Key,C,Default) ->
Default
end.
+lookup(Key, Config) ->
+ {value, {Key, Value}} = lists:keysearch(Key, 1, Config),
+ Value.
fail(Reason, Mod, Line) ->
exit({suite_failed, Reason, Mod, Line}).
diff --git a/lib/snmp/test/test-mibs/RMON-MIB.mib b/lib/snmp/test/test-mibs/RMON-MIB.mib
index 0824dbde1d..fa5bc82f4a 100644
--- a/lib/snmp/test/test-mibs/RMON-MIB.mib
+++ b/lib/snmp/test/test-mibs/RMON-MIB.mib
@@ -1,3826 +1,3958 @@
- RMON-MIB DEFINITIONS ::= BEGIN
-
- IMPORTS
- Counter FROM RFC1155-SMI
- mib-2,DisplayString FROM RFC1213-MIB
- OBJECT-TYPE FROM RFC-1212
- TRAP-TYPE FROM RFC-1215;
-
- -- Remote Network Monitoring MIB
-
- rmon OBJECT IDENTIFIER ::= { mib-2 16 }
-
-
- -- textual conventions
-
- OwnerString ::= DisplayString
- -- This data type is used to model an administratively
- -- assigned name of the owner of a resource. This
- -- information is taken from the NVT ASCII character
- -- set. It is suggested that this name contain one or
-
-
- -- more of the following: IP address, management station
- -- name, network manager's name, location, or phone
- -- number.
- -- In some cases the agent itself will be the owner of
- -- an entry. In these cases, this string shall be set
- -- to a string starting with 'monitor'.
- --
- -- SNMP access control is articulated entirely in terms
- -- of the contents of MIB views; access to a particular
- -- SNMP object instance depends only upon its presence
- -- or absence in a particular MIB view and never upon
- -- its value or the value of related object instances.
- -- Thus, objects of this type afford resolution of
- -- resource contention only among cooperating managers;
- -- they realize no access control function with respect
- -- to uncooperative parties.
- --
- -- By convention, objects with this syntax are declared as
- -- having
- --
- -- SIZE (0..127)
-
- EntryStatus ::= INTEGER
- { valid(1),
- createRequest(2),
- underCreation(3),
- invalid(4)
- }
- -- The status of a table entry.
- --
- -- Setting this object to the value invalid(4) has the
- -- effect of invalidating the corresponding entry.
- -- That is, it effectively disassociates the mapping
- -- identified with said entry.
- -- It is an implementation-specific matter as to whether
- -- the agent removes an invalidated entry from the table.
- -- Accordingly, management stations must be prepared to
- -- receive tabular information from agents that
- -- corresponds to entries currently not in use. Proper
- -- interpretation of such entries requires examination
- -- of the relevant EntryStatus object.
- --
- -- An existing instance of this object cannot be set to
- -- createRequest(2). This object may only be set to
- -- createRequest(2) when this instance is created. When
- -- this object is created, the agent may wish to create
- -- supplemental object instances with default values
- -- to complete a conceptual row in this table. Because
-
-
- -- the creation of these default objects is entirely at
- -- the option of the agent, the manager must not assume
- -- that any will be created, but may make use of any that
- -- are created. Immediately after completing the create
- -- operation, the agent must set this object to
- -- underCreation(3).
- --
- -- When in the underCreation(3) state, an entry is
- -- allowed to exist in a possibly incomplete, possibly
- -- inconsistent state, usually to allow it to be
- -- modified in mutiple PDUs. When in this state, an
- -- entry is not fully active. Entries shall exist in
- -- the underCreation(3) state until the management
- -- station is finished configuring the entry and sets
- -- this object to valid(1) or aborts, setting this
- -- object to invalid(4). If the agent determines that
- -- an entry has been in the underCreation(3) state for
- -- an abnormally long time, it may decide that the
- -- management station has crashed. If the agent makes
- -- this decision, it may set this object to invalid(4)
- -- to reclaim the entry. A prudent agent will
- -- understand that the management station may need to
- -- wait for human input and will allow for that
- -- possibility in its determination of this abnormally
- -- long period.
- --
- -- An entry in the valid(1) state is fully configured and
- -- consistent and fully represents the configuration or
- -- operation such a row is intended to represent. For
- -- example, it could be a statistical function that is
- -- configured and active, or a filter that is available
- -- in the list of filters processed by the packet capture
- -- process.
- --
- -- A manager is restricted to changing the state of an
- -- entry in the following ways:
- --
- -- create under
- -- To: valid Request Creation invalid
- -- From:
- -- valid OK NO OK OK
- -- createRequest N/A N/A N/A N/A
- -- underCreation OK NO OK OK
- -- invalid NO NO NO OK
- -- nonExistent NO OK NO OK
- --
- -- In the table above, it is not applicable to move the
- -- state from the createRequest state to any other
-
-
- -- state because the manager will never find the
- -- variable in that state. The nonExistent state is
- -- not a value of the enumeration, rather it means that
- -- the entryStatus variable does not exist at all.
- --
- -- An agent may allow an entryStatus variable to change
- -- state in additional ways, so long as the semantics
- -- of the states are followed. This allowance is made
- -- to ease the implementation of the agent and is made
- -- despite the fact that managers should never
- -- excercise these additional state transitions.
-
-
- statistics OBJECT IDENTIFIER ::= { rmon 1 }
- history OBJECT IDENTIFIER ::= { rmon 2 }
- alarm OBJECT IDENTIFIER ::= { rmon 3 }
- hosts OBJECT IDENTIFIER ::= { rmon 4 }
- hostTopN OBJECT IDENTIFIER ::= { rmon 5 }
- matrix OBJECT IDENTIFIER ::= { rmon 6 }
- filter OBJECT IDENTIFIER ::= { rmon 7 }
- capture OBJECT IDENTIFIER ::= { rmon 8 }
- event OBJECT IDENTIFIER ::= { rmon 9 }
-
-
- -- The Ethernet Statistics Group
- --
- -- Implementation of the Ethernet Statistics group is
- -- optional.
- --
- -- The ethernet statistics group contains statistics
- -- measured by the probe for each monitored interface on
- -- this device. These statistics take the form of free
- -- running counters that start from zero when a valid entry
- -- is created.
- --
- -- This group currently has statistics defined only for
- -- Ethernet interfaces. Each etherStatsEntry contains
- -- statistics for one Ethernet interface. The probe must
- -- create one etherStats entry for each monitored Ethernet
- -- interface on the device.
-
- etherStatsTable OBJECT-TYPE
- SYNTAX SEQUENCE OF EtherStatsEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of Ethernet statistics entries."
- ::= { statistics 1 }
-
-
- etherStatsEntry OBJECT-TYPE
- SYNTAX EtherStatsEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A collection of statistics kept for a particular
- Ethernet interface. As an example, an instance of the
- etherStatsPkts object might be named etherStatsPkts.1"
- INDEX { etherStatsIndex }
- ::= { etherStatsTable 1 }
-
- EtherStatsEntry ::= SEQUENCE {
- etherStatsIndex INTEGER (1..65535),
- etherStatsDataSource OBJECT IDENTIFIER,
- etherStatsDropEvents Counter,
- etherStatsOctets Counter,
- etherStatsPkts Counter,
- etherStatsBroadcastPkts Counter,
- etherStatsMulticastPkts Counter,
- etherStatsCRCAlignErrors Counter,
- etherStatsUndersizePkts Counter,
- etherStatsOversizePkts Counter,
- etherStatsFragments Counter,
- etherStatsJabbers Counter,
- etherStatsCollisions Counter,
- etherStatsPkts64Octets Counter,
- etherStatsPkts65to127Octets Counter,
- etherStatsPkts128to255Octets Counter,
- etherStatsPkts256to511Octets Counter,
- etherStatsPkts512to1023Octets Counter,
- etherStatsPkts1024to1518Octets Counter,
- etherStatsOwner OwnerString,
- etherStatsStatus EntryStatus
- }
-
- etherStatsIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The value of this object uniquely identifies this
- etherStats entry."
- ::= { etherStatsEntry 1 }
-
- etherStatsDataSource OBJECT-TYPE
- SYNTAX OBJECT IDENTIFIER
- ACCESS read-write
- STATUS mandatory
-
-
- DESCRIPTION
- "This object identifies the source of the data that
- this etherStats entry is configured to analyze. This
- source can be any ethernet interface on this device.
- In order to identify a particular interface, this
- object shall identify the instance of the ifIndex
- object, defined in RFC 1213 and RFC 1573 [4,6], for
- the desired interface. For example, if an entry
- were to receive data from interface #1, this object
- would be set to ifIndex.1.
-
- The statistics in this group reflect all packets
- on the local network segment attached to the
- identified interface.
-
- An agent may or may not be able to tell if
- fundamental changes to the media of the interface
- have occurred and necessitate an invalidation of
- this entry. For example, a hot-pluggable ethernet
- card could be pulled out and replaced by a
- token-ring card. In such a case, if the agent has
- such knowledge of the change, it is recommended that
- it invalidate this entry.
-
- This object may not be modified if the associated
- etherStatsStatus object is equal to valid(1)."
- ::= { etherStatsEntry 2 }
-
- etherStatsDropEvents OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of events in which packets
- were dropped by the probe due to lack of resources.
- Note that this number is not necessarily the number of
- packets dropped; it is just the number of times this
- condition has been detected."
- ::= { etherStatsEntry 3 }
-
- etherStatsOctets OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of octets of data (including
- those in bad packets) received on the
- network (excluding framing bits but including
-
-
- FCS octets).
-
- This object can be used as a reasonable estimate of
- ethernet utilization. If greater precision is
- desired, the etherStatsPkts and etherStatsOctets
- objects should be sampled before and after a common
- interval. The differences in the sampled values are
- Pkts and Octets, respectively, and the number of
- seconds in the interval is Interval. These values
- are used to calculate the Utilization as follows:
-
- Pkts * (9.6 + 6.4) + (Octets * .8)
- Utilization = -------------------------------------
- Interval * 10,000
-
- The result of this equation is the value Utilization
- which is the percent utilization of the ethernet
- segment on a scale of 0 to 100 percent."
- ::= { etherStatsEntry 4 }
-
- etherStatsPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of packets (including bad packets,
- broadcast packets, and multicast packets) received."
- ::= { etherStatsEntry 5 }
-
- etherStatsBroadcastPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of good packets received that were
- directed to the broadcast address. Note that this
- does not include multicast packets."
- ::= { etherStatsEntry 6 }
-
- etherStatsMulticastPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of good packets received that were
- directed to a multicast address. Note that this
- number does not include packets directed to the
- broadcast address."
-
-
- ::= { etherStatsEntry 7 }
-
- etherStatsCRCAlignErrors OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of packets received that
- had a length (excluding framing bits, but
- including FCS octets) of between 64 and 1518
- octets, inclusive, but but had either a bad
- Frame Check Sequence (FCS) with an integral
- number of octets (FCS Error) or a bad FCS with
- a non-integral number of octets (Alignment Error)."
- ::= { etherStatsEntry 8 }
-
- etherStatsUndersizePkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of packets received that were
- less than 64 octets long (excluding framing bits,
- but including FCS octets) and were otherwise well
- formed."
- ::= { etherStatsEntry 9 }
-
- etherStatsOversizePkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of packets received that were
- longer than 1518 octets (excluding framing bits,
- but including FCS octets) and were otherwise
- well formed."
- ::= { etherStatsEntry 10 }
-
- etherStatsFragments OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of packets received that were less
- than 64 octets in length (excluding framing bits but
- including FCS octets) and had either a bad Frame
- Check Sequence (FCS) with an integral number of
- octets (FCS Error) or a bad FCS with a non-integral
-
-
- number of octets (Alignment Error).
-
- Note that it is entirely normal for
- etherStatsFragments to increment. This is because
- it counts both runts (which are normal occurrences
- due to collisions) and noise hits."
- ::= { etherStatsEntry 11 }
-
- etherStatsJabbers OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of packets received that were
- longer than 1518 octets (excluding framing bits,
- but including FCS octets), and had either a bad
- Frame Check Sequence (FCS) with an integral number
- of octets (FCS Error) or a bad FCS with a
- non-integral number of octets (Alignment Error).
-
- Note that this definition of jabber is different
- than the definition in IEEE-802.3 section 8.2.1.5
- (10BASE5) and section 10.3.1.4 (10BASE2). These
- documents define jabber as the condition where any
- packet exceeds 20 ms. The allowed range to detect
- jabber is between 20 ms and 150 ms."
- ::= { etherStatsEntry 12 }
-
- etherStatsCollisions OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The best estimate of the total number of collisions
- on this Ethernet segment.
-
- The value returned will depend on the location of
- the RMON probe. Section 8.2.1.3 (10BASE-5) and
- section 10.3.1.3 (10BASE-2) of IEEE standard 802.3
- states that a station must detect a collision, in
- the receive mode, if three or more stations are
- transmitting simultaneously. A repeater port must
- detect a collision when two or more stations are
- transmitting simultaneously. Thus a probe placed on
- a repeater port could record more collisions than a
- probe connected to a station on the same segment
- would.
-
-
-
- Probe location plays a much smaller role when
- considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE
- standard 802.3 defines a collision as the
- simultaneous presence of signals on the DO and RD
- circuits (transmitting and receiving at the same
- time). A 10BASE-T station can only detect
- collisions when it is transmitting. Thus probes
- placed on a station and a repeater, should report
- the same number of collisions.
-
- Note also that an RMON probe inside a repeater
- should ideally report collisions between the
- repeater and one or more other hosts (transmit
- collisions as defined by IEEE 802.3k) plus receiver
- collisions observed on any coax segments to which
- the repeater is connected."
- ::= { etherStatsEntry 13 }
-
- etherStatsPkts64Octets OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of packets (including bad
- packets) received that were 64 octets in length
- (excluding framing bits but including FCS octets)."
- ::= { etherStatsEntry 14 }
-
- etherStatsPkts65to127Octets OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of packets (including bad
- packets) received that were between
- 65 and 127 octets in length inclusive
- (excluding framing bits but including FCS octets)."
- ::= { etherStatsEntry 15 }
-
- etherStatsPkts128to255Octets OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of packets (including bad
- packets) received that were between
- 128 and 255 octets in length inclusive
- (excluding framing bits but including FCS octets)."
-
-
- ::= { etherStatsEntry 16 }
-
- etherStatsPkts256to511Octets OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of packets (including bad
- packets) received that were between
- 256 and 511 octets in length inclusive
- (excluding framing bits but including FCS octets)."
- ::= { etherStatsEntry 17 }
-
- etherStatsPkts512to1023Octets OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of packets (including bad
- packets) received that were between
- 512 and 1023 octets in length inclusive
- (excluding framing bits but including FCS octets)."
- ::= { etherStatsEntry 18 }
-
- etherStatsPkts1024to1518Octets OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of packets (including bad
- packets) received that were between
- 1024 and 1518 octets in length inclusive
- (excluding framing bits but including FCS octets)."
- ::= { etherStatsEntry 19 }
-
- etherStatsOwner OBJECT-TYPE
- SYNTAX OwnerString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The entity that configured this entry and is
- therefore using the resources assigned to it."
- ::= { etherStatsEntry 20 }
-
- etherStatsStatus OBJECT-TYPE
- SYNTAX EntryStatus
- ACCESS read-write
- STATUS mandatory
-
-
- DESCRIPTION
- "The status of this etherStats entry."
- ::= { etherStatsEntry 21 }
-
-
- -- The History Control Group
-
- -- Implementation of the History Control group is optional.
- --
- -- The history control group controls the periodic statistical
- -- sampling of data from various types of networks. The
- -- historyControlTable stores configuration entries that each
- -- define an interface, polling period, and other parameters.
- -- Once samples are taken, their data is stored in an entry
- -- in a media-specific table. Each such entry defines one
- -- sample, and is associated with the historyControlEntry that
- -- caused the sample to be taken. Each counter in the
- -- etherHistoryEntry counts the same event as its
- -- similarly-named counterpart in the etherStatsEntry,
- -- except that each value here is a cumulative sum during a
- -- sampling period.
- --
- -- If the probe keeps track of the time of day, it should
- -- start the first sample of the history at a time such that
- -- when the next hour of the day begins, a sample is
- -- started at that instant. This tends to make more
- -- user-friendly reports, and enables comparison of reports
- -- from different probes that have relatively accurate time
- -- of day.
- --
- -- The probe is encouraged to add two history control entries
- -- per monitored interface upon initialization that describe
- -- a short term and a long term polling period. Suggested
- -- parameters are 30 seconds for the short term polling period
- -- and 30 minutes for the long term period.
-
- historyControlTable OBJECT-TYPE
- SYNTAX SEQUENCE OF HistoryControlEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of history control entries."
- ::= { history 1 }
-
- historyControlEntry OBJECT-TYPE
- SYNTAX HistoryControlEntry
- ACCESS not-accessible
- STATUS mandatory
-
-
- DESCRIPTION
- "A list of parameters that set up a periodic sampling
- of statistics. As an example, an instance of the
- historyControlInterval object might be named
- historyControlInterval.2"
- INDEX { historyControlIndex }
- ::= { historyControlTable 1 }
-
- HistoryControlEntry ::= SEQUENCE {
- historyControlIndex INTEGER (1..65535),
- historyControlDataSource OBJECT IDENTIFIER,
- historyControlBucketsRequested INTEGER (1..65535),
- historyControlBucketsGranted INTEGER (1..65535),
- historyControlInterval INTEGER (1..3600),
- historyControlOwner OwnerString,
- historyControlStatus EntryStatus
- }
-
- historyControlIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index that uniquely identifies an entry in the
- historyControl table. Each such entry defines a
- set of samples at a particular interval for an
- interface on the device."
- ::= { historyControlEntry 1 }
-
- historyControlDataSource OBJECT-TYPE
- SYNTAX OBJECT IDENTIFIER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This object identifies the source of the data for
- which historical data was collected and
- placed in a media-specific table on behalf of this
- historyControlEntry. This source can be any
- interface on this device. In order to identify
- a particular interface, this object shall identify
- the instance of the ifIndex object, defined
- in RFC 1213 and RFC 1573 [4,6], for the desired
- interface. For example, if an entry were to receive
- data from interface #1, this object would be set
- to ifIndex.1.
-
- The statistics in this group reflect all packets
- on the local network segment attached to the
-
-
- identified interface.
-
- An agent may or may not be able to tell if fundamental
- changes to the media of the interface have occurred
- and necessitate an invalidation of this entry. For
- example, a hot-pluggable ethernet card could be
- pulled out and replaced by a token-ring card. In
- such a case, if the agent has such knowledge of the
- change, it is recommended that it invalidate this
- entry.
-
- This object may not be modified if the associated
- historyControlStatus object is equal to valid(1)."
- ::= { historyControlEntry 2 }
-
- historyControlBucketsRequested OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The requested number of discrete time intervals
- over which data is to be saved in the part of the
- media-specific table associated with this
- historyControlEntry.
-
- When this object is created or modified, the probe
- should set historyControlBucketsGranted as closely to
- this object as is possible for the particular probe
- implementation and available resources."
- DEFVAL { 50 }
- ::= { historyControlEntry 3 }
-
- historyControlBucketsGranted OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of discrete sampling intervals
- over which data shall be saved in the part of
- the media-specific table associated with this
- historyControlEntry.
-
- When the associated historyControlBucketsRequested
- object is created or modified, the probe
- should set this object as closely to the requested
- value as is possible for the particular
- probe implementation and available resources. The
- probe must not lower this value except as a result
-
-
- of a modification to the associated
- historyControlBucketsRequested object.
-
- There will be times when the actual number of
- buckets associated with this entry is less than
- the value of this object. In this case, at the
- end of each sampling interval, a new bucket will
- be added to the media-specific table.
-
- When the number of buckets reaches the value of
- this object and a new bucket is to be added to the
- media-specific table, the oldest bucket associated
- with this historyControlEntry shall be deleted by
- the agent so that the new bucket can be added.
-
- When the value of this object changes to a value less
- than the current value, entries are deleted
- from the media-specific table associated with this
- historyControlEntry. Enough of the oldest of these
- entries shall be deleted by the agent so that their
- number remains less than or equal to the new value of
- this object.
-
- When the value of this object changes to a value
- greater than the current value, the number of
- associated media- specific entries may be allowed to
- grow."
- ::= { historyControlEntry 4 }
-
- historyControlInterval OBJECT-TYPE
- SYNTAX INTEGER (1..3600)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The interval in seconds over which the data is
- sampled for each bucket in the part of the
- media-specific table associated with this
- historyControlEntry. This interval can
- be set to any number of seconds between 1 and
- 3600 (1 hour).
-
- Because the counters in a bucket may overflow at their
- maximum value with no indication, a prudent manager
- will take into account the possibility of overflow
- in any of the associated counters. It is important
- to consider the minimum time in which any counter
- could overflow on a particular media type and set
- the historyControlInterval object to a value less
-
-
- than this interval. This is typically most
- important for the 'octets' counter in any
- media-specific table. For example, on an Ethernet
- network, the etherHistoryOctets counter could
- overflow in about one hour at the Ethernet's maximum
- utilization.
-
- This object may not be modified if the associated
- historyControlStatus object is equal to valid(1)."
- DEFVAL { 1800 }
- ::= { historyControlEntry 5 }
-
- historyControlOwner OBJECT-TYPE
- SYNTAX OwnerString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The entity that configured this entry and is
- therefore using the resources assigned to it."
- ::= { historyControlEntry 6 }
-
- historyControlStatus OBJECT-TYPE
- SYNTAX EntryStatus
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The status of this historyControl entry.
-
- Each instance of the media-specific table associated
- with this historyControlEntry will be deleted by the
- agent if this historyControlEntry is not equal to
- valid(1)."
- ::= { historyControlEntry 7 }
-
-
- -- The Ethernet History Group
-
- -- Implementation of the Ethernet History group is optional.
- --
- -- The Ethernet History group records periodic
- -- statistical samples from a network and stores them
- -- for later retrieval. Once samples are taken, their
- -- data is stored in an entry in a media-specific
- -- table. Each such entry defines one sample, and is
- -- associated with the historyControlEntry that caused
- -- the sample to be taken. This group defines the
- -- etherHistoryTable, for Ethernet networks.
- --
-
-
- etherHistoryTable OBJECT-TYPE
- SYNTAX SEQUENCE OF EtherHistoryEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of Ethernet history entries."
- ::= { history 2 }
-
- etherHistoryEntry OBJECT-TYPE
- SYNTAX EtherHistoryEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "An historical sample of Ethernet statistics on a
- particular Ethernet interface. This sample is
- associated with the historyControlEntry which set up
- the parameters for a regular collection of these
- samples. As an example, an instance of the
- etherHistoryPkts object might be named
- etherHistoryPkts.2.89"
- INDEX { etherHistoryIndex , etherHistorySampleIndex }
- ::= { etherHistoryTable 1 }
-
- EtherHistoryEntry ::= SEQUENCE {
- etherHistoryIndex INTEGER (1..65535),
- etherHistorySampleIndex INTEGER (1..2147483647),
- etherHistoryIntervalStart TimeTicks,
- etherHistoryDropEvents Counter,
- etherHistoryOctets Counter,
- etherHistoryPkts Counter,
- etherHistoryBroadcastPkts Counter,
- etherHistoryMulticastPkts Counter,
- etherHistoryCRCAlignErrors Counter,
- etherHistoryUndersizePkts Counter,
- etherHistoryOversizePkts Counter,
- etherHistoryFragments Counter,
- etherHistoryJabbers Counter,
- etherHistoryCollisions Counter,
- etherHistoryUtilization INTEGER (0..10000)
- }
-
- etherHistoryIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The history of which this entry is a part. The
- history identified by a particular value of this
-
-
- index is the same history as identified
- by the same value of historyControlIndex."
- ::= { etherHistoryEntry 1 }
-
- etherHistorySampleIndex OBJECT-TYPE
- SYNTAX INTEGER (1..2147483647)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index that uniquely identifies the particular
- sample this entry represents among all samples
- associated with the same historyControlEntry.
- This index starts at 1 and increases by one
- as each new sample is taken."
- ::= { etherHistoryEntry 2 }
-
- etherHistoryIntervalStart OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The value of sysUpTime at the start of the interval
- over which this sample was measured. If the probe
- keeps track of the time of day, it should start
- the first sample of the history at a time such that
- when the next hour of the day begins, a sample is
- started at that instant. Note that following this
- rule may require the probe to delay collecting the
- first sample of the history, as each sample must be
- of the same interval. Also note that the sample which
- is currently being collected is not accessible in this
- table until the end of its interval."
- ::= { etherHistoryEntry 3 }
-
- etherHistoryDropEvents OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of events in which packets
- were dropped by the probe due to lack of resources
- during this sampling interval. Note that this number
- is not necessarily the number of packets dropped, it
- is just the number of times this condition has been
- detected."
- ::= { etherHistoryEntry 4 }
-
- etherHistoryOctets OBJECT-TYPE
-
-
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of octets of data (including
- those in bad packets) received on the
- network (excluding framing bits but including
- FCS octets)."
- ::= { etherHistoryEntry 5 }
-
- etherHistoryPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of packets (including bad packets)
- received during this sampling interval."
- ::= { etherHistoryEntry 6 }
-
- etherHistoryBroadcastPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of good packets received during this
- sampling interval that were directed to the
- broadcast address."
- ::= { etherHistoryEntry 7 }
-
- etherHistoryMulticastPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of good packets received during this
- sampling interval that were directed to a
- multicast address. Note that this number does not
- include packets addressed to the broadcast address."
- ::= { etherHistoryEntry 8 }
-
- etherHistoryCRCAlignErrors OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of packets received during this sampling
- interval that had a length (excluding framing bits
- but including FCS octets) between 64 and 1518
-
-
- octets, inclusive, but had either a bad Frame Check
- Sequence (FCS) with an integral number of octets
- (FCS Error) or a bad FCS with a non-integral number
- of octets (Alignment Error)."
- ::= { etherHistoryEntry 9 }
-
- etherHistoryUndersizePkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of packets received during this
- sampling interval that were less than 64 octets
- long (excluding framing bits but including FCS
- octets) and were otherwise well formed."
- ::= { etherHistoryEntry 10 }
-
- etherHistoryOversizePkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of packets received during this
- sampling interval that were longer than 1518
- octets (excluding framing bits but including
- FCS octets) but were otherwise well formed."
- ::= { etherHistoryEntry 11 }
-
- etherHistoryFragments OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The total number of packets received during this
- sampling interval that were less than 64 octets in
- length (excluding framing bits but including FCS
- octets) had either a bad Frame Check Sequence (FCS)
- with an integral number of octets (FCS Error) or a bad
- FCS with a non-integral number of octets (Alignment
- Error).
-
- Note that it is entirely normal for
- etherHistoryFragments to increment. This is because
- it counts both runts (which are normal occurrences
- due to collisions) and noise hits."
- ::= { etherHistoryEntry 12 }
-
- etherHistoryJabbers OBJECT-TYPE
-
-
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of packets received during this
- sampling interval that were longer than 1518 octets
- (excluding framing bits but including FCS octets),
- and had either a bad Frame Check Sequence (FCS)
- with an integral number of octets (FCS Error) or
- a bad FCS with a non-integral number of octets
- (Alignment Error).
-
- Note that this definition of jabber is different
- than the definition in IEEE-802.3 section 8.2.1.5
- (10BASE5) and section 10.3.1.4 (10BASE2). These
- documents define jabber as the condition where any
- packet exceeds 20 ms. The allowed range to detect
- jabber is between 20 ms and 150 ms."
- ::= { etherHistoryEntry 13 }
-
- etherHistoryCollisions OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The best estimate of the total number of collisions
- on this Ethernet segment during this sampling
- interval.
-
- The value returned will depend on the location of
- the RMON probe. Section 8.2.1.3 (10BASE-5) and
- section 10.3.1.3 (10BASE-2) of IEEE standard 802.3
- states that a station must detect a collision, in
- the receive mode, if three or more stations are
- transmitting simultaneously. A repeater port must
- detect a collision when two or more stations are
- transmitting simultaneously. Thus a probe placed on
- a repeater port could record more collisions than a
- probe connected to a station on the same segment
- would.
-
- Probe location plays a much smaller role when
- considering 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE
- standard 802.3 defines a collision as the
- simultaneous presence of signals on the DO and RD
- circuits (transmitting and receiving at the same
- time). A 10BASE-T station can only detect
- collisions when it is transmitting. Thus probes
-
-
- placed on a station and a repeater, should report
- the same number of collisions.
-
- Note also that an RMON probe inside a repeater
- should ideally report collisions between the
- repeater and one or more other hosts (transmit
- collisions as defined by IEEE 802.3k) plus receiver
- collisions observed on any coax segments to which
- the repeater is connected."
- ::= { etherHistoryEntry 14 }
-
- etherHistoryUtilization OBJECT-TYPE
- SYNTAX INTEGER (0..10000)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The best estimate of the mean physical layer
- network utilization on this interface during this
- sampling interval, in hundredths of a percent."
- ::= { etherHistoryEntry 15 }
-
-
- -- The Alarm Group
-
- -- Implementation of the Alarm group is optional.
- --
- -- The Alarm Group requires the implementation of the Event
- -- group.
- --
- -- The Alarm group periodically takes
- -- statistical samples from variables in the probe and
- -- compares them to thresholds that have been
- -- configured. The alarm table stores configuration
- -- entries that each define a variable, polling period,
- -- and threshold parameters. If a sample is found to
- -- cross the threshold values, an event is generated.
- -- Only variables that resolve to an ASN.1 primitive
- -- type of INTEGER (INTEGER, Counter, Gauge, or
- -- TimeTicks) may be monitored in this way.
- --
- -- This function has a hysteresis mechanism to limit
- -- the generation of events. This mechanism generates
- -- one event as a threshold is crossed in the
- -- appropriate direction. No more events are generated
- -- for that threshold until the opposite threshold is
- -- crossed.
- --
- -- In the case of a sampling a deltaValue, a probe may
-
-
- -- implement this mechanism with more precision if it
- -- takes a delta sample twice per period, each time
- -- comparing the sum of the latest two samples to the
- -- threshold. This allows the detection of threshold
- -- crossings that span the sampling boundary. Note
- -- that this does not require any special configuration
- -- of the threshold value. It is suggested that probes
- -- implement this more precise algorithm.
-
- alarmTable OBJECT-TYPE
- SYNTAX SEQUENCE OF AlarmEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of alarm entries."
- ::= { alarm 1 }
-
- alarmEntry OBJECT-TYPE
- SYNTAX AlarmEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of parameters that set up a periodic checking
- for alarm conditions. For example, an instance of the
- alarmValue object might be named alarmValue.8"
- INDEX { alarmIndex }
- ::= { alarmTable 1 }
-
- AlarmEntry ::= SEQUENCE {
- alarmIndex INTEGER (1..65535),
- alarmInterval INTEGER,
- alarmVariable OBJECT IDENTIFIER,
- alarmSampleType INTEGER,
- alarmValue INTEGER,
- alarmStartupAlarm INTEGER,
- alarmRisingThreshold INTEGER,
- alarmFallingThreshold INTEGER,
- alarmRisingEventIndex INTEGER (0..65535),
- alarmFallingEventIndex INTEGER (0..65535),
- alarmOwner OwnerString,
- alarmStatus EntryStatus
- }
-
- alarmIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
-
-
- "An index that uniquely identifies an entry in the
- alarm table. Each such entry defines a
- diagnostic sample at a particular interval
- for an object on the device."
- ::= { alarmEntry 1 }
-
- alarmInterval OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The interval in seconds over which the data is
- sampled and compared with the rising and falling
- thresholds. When setting this variable, care
- should be taken in the case of deltaValue
- sampling - the interval should be set short enough
- that the sampled variable is very unlikely to
- increase or decrease by more than 2^31 - 1 during
- a single sampling interval.
-
- This object may not be modified if the associated
- alarmStatus object is equal to valid(1)."
- ::= { alarmEntry 2 }
-
- alarmVariable OBJECT-TYPE
- SYNTAX OBJECT IDENTIFIER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The object identifier of the particular variable to
- be sampled. Only variables that resolve to an ASN.1
- primitive type of INTEGER (INTEGER, Counter, Gauge,
- or TimeTicks) may be sampled.
-
- Because SNMP access control is articulated entirely
- in terms of the contents of MIB views, no access
- control mechanism exists that can restrict the value
- of this object to identify only those objects that
- exist in a particular MIB view. Because there is
- thus no acceptable means of restricting the read
- access that could be obtained through the alarm
- mechanism, the probe must only grant write access to
- this object in those views that have read access to
- all objects on the probe.
-
- During a set operation, if the supplied variable
- name is not available in the selected MIB view, a
- badValue error must be returned. If at any time the
-
-
- variable name of an established alarmEntry is no
- longer available in the selected MIB view, the probe
- must change the status of this alarmEntry to
- invalid(4).
-
- This object may not be modified if the associated
- alarmStatus object is equal to valid(1)."
- ::= { alarmEntry 3 }
-
- alarmSampleType OBJECT-TYPE
- SYNTAX INTEGER {
- absoluteValue(1),
- deltaValue(2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The method of sampling the selected variable and
- calculating the value to be compared against the
- thresholds. If the value of this object is
- absoluteValue(1), the value of the selected variable
- will be compared directly with the thresholds at the
- end of the sampling interval. If the value of this
- object is deltaValue(2), the value of the selected
- variable at the last sample will be subtracted from
- the current value, and the difference compared with
- the thresholds.
-
- This object may not be modified if the associated
- alarmStatus object is equal to valid(1)."
- ::= { alarmEntry 4 }
-
- alarmValue OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The value of the statistic during the last sampling
- period. For example, if the sample type is
- deltaValue, this value will be the difference
- between the samples at the beginning and end of the
- period. If the sample type is absoluteValue, this
- value will be the sampled value at the end of the
- period.
-
- This is the value that is compared with the rising and
- falling thresholds.
-
-
-
- The value during the current sampling period is not
- made available until the period is completed and will
- remain available until the next period completes."
- ::= { alarmEntry 5 }
-
- alarmStartupAlarm OBJECT-TYPE
- SYNTAX INTEGER {
- risingAlarm(1),
- fallingAlarm(2),
- risingOrFallingAlarm(3)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The alarm that may be sent when this entry is first
- set to valid. If the first sample after this entry
- becomes valid is greater than or equal to the
- risingThreshold and alarmStartupAlarm is equal to
- risingAlarm(1) or risingOrFallingAlarm(3), then a
- single rising alarm will be generated. If the first
- sample after this entry becomes valid is less than
- or equal to the fallingThreshold and
- alarmStartupAlarm is equal to fallingAlarm(2) or
- risingOrFallingAlarm(3), then a single falling alarm
- will be generated.
-
- This object may not be modified if the associated
- alarmStatus object is equal to valid(1)."
- ::= { alarmEntry 6 }
-
- alarmRisingThreshold OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "A threshold for the sampled statistic. When the
- current sampled value is greater than or equal to
- this threshold, and the value at the last sampling
- interval was less than this threshold, a single
- event will be generated. A single event will also
- be generated if the first sample after this entry
- becomes valid is greater than or equal to this
- threshold and the associated alarmStartupAlarm is
- equal to risingAlarm(1) or risingOrFallingAlarm(3).
-
- After a rising event is generated, another such event
- will not be generated until the sampled value
- falls below this threshold and reaches the
-
-
- alarmFallingThreshold.
-
- This object may not be modified if the associated
- alarmStatus object is equal to valid(1)."
- ::= { alarmEntry 7 }
-
- alarmFallingThreshold OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "A threshold for the sampled statistic. When the
- current sampled value is less than or equal to this
- threshold, and the value at the last sampling
- interval was greater than this threshold, a single
- event will be generated. A single event will also
- be generated if the first sample after this entry
- becomes valid is less than or equal to this
- threshold and the associated alarmStartupAlarm is
- equal to fallingAlarm(2) or risingOrFallingAlarm(3).
-
- After a falling event is generated, another such event
- will not be generated until the sampled value
- rises above this threshold and reaches the
- alarmRisingThreshold.
-
- This object may not be modified if the associated
- alarmStatus object is equal to valid(1)."
- ::= { alarmEntry 8 }
-
- alarmRisingEventIndex OBJECT-TYPE
- SYNTAX INTEGER (0..65535)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The index of the eventEntry that is
- used when a rising threshold is crossed. The
- eventEntry identified by a particular value of
- this index is the same as identified by the same value
- of the eventIndex object. If there is no
- corresponding entry in the eventTable, then
- no association exists. In particular, if this value
- is zero, no associated event will be generated, as
- zero is not a valid event index.
-
- This object may not be modified if the associated
- alarmStatus object is equal to valid(1)."
- ::= { alarmEntry 9 }
-
-
- alarmFallingEventIndex OBJECT-TYPE
- SYNTAX INTEGER (0..65535)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The index of the eventEntry that is
- used when a falling threshold is crossed. The
- eventEntry identified by a particular value of
- this index is the same as identified by the same value
- of the eventIndex object. If there is no
- corresponding entry in the eventTable, then
- no association exists. In particular, if this value
- is zero, no associated event will be generated, as
- zero is not a valid event index.
-
- This object may not be modified if the associated
- alarmStatus object is equal to valid(1)."
- ::= { alarmEntry 10 }
-
- alarmOwner OBJECT-TYPE
- SYNTAX OwnerString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The entity that configured this entry and is
- therefore using the resources assigned to it."
- ::= { alarmEntry 11 }
-
- alarmStatus OBJECT-TYPE
- SYNTAX EntryStatus
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The status of this alarm entry."
- ::= { alarmEntry 12 }
-
-
- -- The Host Group
-
- -- Implementation of the Host group is optional.
- --
- -- The host group discovers new hosts on the network by
- -- keeping a list of source and destination MAC Addresses seen
- -- in good packets. For each of these addresses, the host
- -- group keeps a set of statistics. The hostControlTable
- -- controls which interfaces this function is performed on,
- -- and contains some information about the process. On
- -- behalf of each hostControlEntry, data is collected on an
-
-
- -- interface and placed in both the hostTable and the
- -- hostTimeTable. If the monitoring device finds itself
- -- short of resources, it may delete entries as needed. It
- -- is suggested that the device delete the least recently
- -- used entries first.
-
- -- The hostTable contains entries for each address
- -- discovered on a particular interface. Each entry
- -- contains statistical data about that host. This table is
- -- indexed by the MAC address of the host, through which a
- -- random access may be achieved.
-
- -- The hostTimeTable contains data in the same format as the
- -- hostTable, and must contain the same set of hosts, but is
- -- indexed using hostTimeCreationOrder rather than
- -- hostAddress.
- -- The hostTimeCreationOrder is an integer which reflects
- -- the relative order in which a particular entry was
- -- discovered and thus inserted into the table. As this
- -- order, and thus the index, is among those entries
- -- currently in the table, the index for a particular entry
- -- may change if an (earlier) entry is deleted. Thus the
- -- association between hostTimeCreationOrder and
- -- hostTimeEntry may be broken at any time.
-
- -- The hostTimeTable has two important uses. The first is the
- -- fast download of this potentially large table. Because the
- -- index of this table runs from 1 to the size of the table,
- -- inclusive, its values are predictable. This allows very
- -- efficient packing of variables into SNMP PDU's and allows
- -- a table transfer to have multiple packets outstanding.
- -- These benefits increase transfer rates tremendously.
-
- -- The second use of the hostTimeTable is the efficient
- -- discovery by the management station of new entries added
- -- to the table. After the management station has downloaded
- -- the entire table, it knows that new entries will be added
- -- immediately after the end of the current table. It can
- -- thus detect new entries there and retrieve them easily.
-
- -- Because the association between hostTimeCreationOrder and
- -- hostTimeEntry may be broken at any time, the management
- -- station must monitor the related hostControlLastDeleteTime
- -- object. When the management station thus detects a
- -- deletion, it must assume that any such associations have
- --- been broken, and invalidate any it has stored locally.
- -- This includes restarting any download of the
- -- hostTimeTable that may have been in progress, as well as
-
-
- -- rediscovering the end of the hostTimeTable so that it may
- -- detect new entries. If the management station does not
- -- detect the broken association, it may continue to refer
- -- to a particular host by its creationOrder while
- -- unwittingly retrieving the data associated with another
- -- host entirely. If this happens while downloading the
- -- host table, the management station may fail to download
- -- all of the entries in the table.
-
- hostControlTable OBJECT-TYPE
- SYNTAX SEQUENCE OF HostControlEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of host table control entries."
- ::= { hosts 1 }
-
- hostControlEntry OBJECT-TYPE
- SYNTAX HostControlEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of parameters that set up the discovery of
- hosts on a particular interface and the collection
- of statistics about these hosts. For example, an
- instance of the hostControlTableSize object might be
- named hostControlTableSize.1"
- INDEX { hostControlIndex }
- ::= { hostControlTable 1 }
-
- HostControlEntry ::= SEQUENCE {
- hostControlIndex INTEGER (1..65535),
- hostControlDataSource OBJECT IDENTIFIER,
- hostControlTableSize INTEGER,
- hostControlLastDeleteTime TimeTicks,
- hostControlOwner OwnerString,
- hostControlStatus EntryStatus
- }
-
- hostControlIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index that uniquely identifies an entry in the
- hostControl table. Each such entry defines
- a function that discovers hosts on a particular
- interface and places statistics about them in the
-
-
- hostTable and the hostTimeTable on behalf of this
- hostControlEntry."
- ::= { hostControlEntry 1 }
-
- hostControlDataSource OBJECT-TYPE
- SYNTAX OBJECT IDENTIFIER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This object identifies the source of the data for
- this instance of the host function. This source
- can be any interface on this device. In order
- to identify a particular interface, this object shall
- identify the instance of the ifIndex object, defined
- in RFC 1213 and RFC 1573 [4,6], for the desired
- interface. For example, if an entry were to receive
- data from interface #1, this object would be set to
- ifIndex.1.
-
- The statistics in this group reflect all packets
- on the local network segment attached to the
- identified interface.
-
- An agent may or may not be able to tell if
- fundamental changes to the media of the interface
- have occurred and necessitate an invalidation of
- this entry. For example, a hot-pluggable ethernet
- card could be pulled out and replaced by a
- token-ring card. In such a case, if the agent has
- such knowledge of the change, it is recommended that
- it invalidate this entry.
-
- This object may not be modified if the associated
- hostControlStatus object is equal to valid(1)."
- ::= { hostControlEntry 2 }
-
- hostControlTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of hostEntries in the hostTable and the
- hostTimeTable associated with this hostControlEntry."
- ::= { hostControlEntry 3 }
-
- hostControlLastDeleteTime OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-only
-
-
- STATUS mandatory
- DESCRIPTION
- "The value of sysUpTime when the last entry
- was deleted from the portion of the hostTable
- associated with this hostControlEntry. If no
- deletions have occurred, this value shall be zero."
- ::= { hostControlEntry 4 }
-
- hostControlOwner OBJECT-TYPE
- SYNTAX OwnerString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The entity that configured this entry and is
- therefore using the resources assigned to it."
- ::= { hostControlEntry 5 }
-
- hostControlStatus OBJECT-TYPE
- SYNTAX EntryStatus
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The status of this hostControl entry.
-
- If this object is not equal to valid(1), all
- associated entries in the hostTable, hostTimeTable,
- and the hostTopNTable shall be deleted by the
- agent."
- ::= { hostControlEntry 6 }
-
- hostTable OBJECT-TYPE
- SYNTAX SEQUENCE OF HostEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of host entries."
- ::= { hosts 2 }
-
- hostEntry OBJECT-TYPE
- SYNTAX HostEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A collection of statistics for a particular host
- that has been discovered on an interface of this
- device. For example, an instance of the
- hostOutBroadcastPkts object might be named
- hostOutBroadcastPkts.1.6.8.0.32.27.3.176"
-
-
- INDEX { hostIndex, hostAddress }
- ::= { hostTable 1 }
-
- HostEntry ::= SEQUENCE {
- hostAddress OCTET STRING,
- hostCreationOrder INTEGER (1..65535),
- hostIndex INTEGER (1..65535),
- hostInPkts Counter,
- hostOutPkts Counter,
- hostInOctets Counter,
- hostOutOctets Counter,
- hostOutErrors Counter,
- hostOutBroadcastPkts Counter,
- hostOutMulticastPkts Counter
- }
-
- hostAddress OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The physical address of this host."
- ::= { hostEntry 1 }
-
- hostCreationOrder OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index that defines the relative ordering of
- the creation time of hosts captured for a
- particular hostControlEntry. This index shall
- be between 1 and N, where N is the value of
- the associated hostControlTableSize. The ordering
- of the indexes is based on the order of each entry's
- insertion into the table, in which entries added
- earlier have a lower index value than entries added
- later.
-
- It is important to note that the order for a
- particular entry may change as an (earlier) entry
- is deleted from the table. Because this order may
- change, management stations should make use of the
- hostControlLastDeleteTime variable in the
- hostControlEntry associated with the relevant
- portion of the hostTable. By observing
- this variable, the management station may detect
- the circumstances where a previous association
-
-
- between a value of hostCreationOrder
- and a hostEntry may no longer hold."
- ::= { hostEntry 2 }
-
- hostIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The set of collected host statistics of which
- this entry is a part. The set of hosts
- identified by a particular value of this
- index is associated with the hostControlEntry
- as identified by the same value of hostControlIndex."
- ::= { hostEntry 3 }
-
- hostInPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of good packets transmitted to this
- address since it was added to the hostTable."
- ::= { hostEntry 4 }
-
- hostOutPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of packets, including bad packets,
- transmitted by this address since it was added
- to the hostTable."
- ::= { hostEntry 5 }
-
- hostInOctets OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of octets transmitted to this address
- since it was added to the hostTable (excluding
- framing bits but including FCS octets), except for
- those octets in bad packets."
- ::= { hostEntry 6 }
-
- hostOutOctets OBJECT-TYPE
- SYNTAX Counter
-
-
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of octets transmitted by this address
- since it was added to the hostTable (excluding
- framing bits but including FCS octets), including
- those octets in bad packets."
- ::= { hostEntry 7 }
-
- hostOutErrors OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of bad packets transmitted by this address
- since this host was added to the hostTable."
- ::= { hostEntry 8 }
-
- hostOutBroadcastPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of good packets transmitted by this
- address that were directed to the broadcast address
- since this host was added to the hostTable."
- ::= { hostEntry 9 }
-
- hostOutMulticastPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of good packets transmitted by this
- address that were directed to a multicast address
- since this host was added to the hostTable.
- Note that this number does not include packets
- directed to the broadcast address."
- ::= { hostEntry 10 }
-
- -- host Time Table
-
- hostTimeTable OBJECT-TYPE
- SYNTAX SEQUENCE OF HostTimeEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of time-ordered host table entries."
-
-
- ::= { hosts 3 }
-
- hostTimeEntry OBJECT-TYPE
- SYNTAX HostTimeEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A collection of statistics for a particular host
- that has been discovered on an interface of this
- device. This collection includes the relative
- ordering of the creation time of this object. For
- example, an instance of the hostTimeOutBroadcastPkts
- object might be named
- hostTimeOutBroadcastPkts.1.687"
- INDEX { hostTimeIndex, hostTimeCreationOrder }
- ::= { hostTimeTable 1 }
-
- HostTimeEntry ::= SEQUENCE {
- hostTimeAddress OCTET STRING,
- hostTimeCreationOrder INTEGER (1..65535),
- hostTimeIndex INTEGER (1..65535),
- hostTimeInPkts Counter,
- hostTimeOutPkts Counter,
- hostTimeInOctets Counter,
- hostTimeOutOctets Counter,
- hostTimeOutErrors Counter,
- hostTimeOutBroadcastPkts Counter,
- hostTimeOutMulticastPkts Counter
- }
-
- hostTimeAddress OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The physical address of this host."
- ::= { hostTimeEntry 1 }
-
- hostTimeCreationOrder OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index that uniquely identifies an entry in
- the hostTime table among those entries associated
- with the same hostControlEntry. This index shall
- be between 1 and N, where N is the value of
- the associated hostControlTableSize. The ordering
-
-
- of the indexes is based on the order of each entry's
- insertion into the table, in which entries added
- earlier have a lower index value than entries added
- later. Thus the management station has the ability to
- learn of new entries added to this table without
- downloading the entire table.
-
- It is important to note that the index for a
- particular entry may change as an (earlier) entry
- is deleted from the table. Because this order may
- change, management stations should make use of the
- hostControlLastDeleteTime variable in the
- hostControlEntry associated with the relevant
- portion of the hostTimeTable. By observing
- this variable, the management station may detect
- the circumstances where a download of the table
- may have missed entries, and where a previous
- association between a value of hostTimeCreationOrder
- and a hostTimeEntry may no longer hold."
- ::= { hostTimeEntry 2 }
-
- hostTimeIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The set of collected host statistics of which
- this entry is a part. The set of hosts
- identified by a particular value of this
- index is associated with the hostControlEntry
- as identified by the same value of hostControlIndex."
- ::= { hostTimeEntry 3 }
-
- hostTimeInPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of good packets transmitted to this
- address since it was added to the hostTimeTable."
- ::= { hostTimeEntry 4 }
-
- hostTimeOutPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of god packets transmitted by this
-
-
- address since it was added to the hostTimeTable."
- ::= { hostTimeEntry 5 }
-
- hostTimeInOctets OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of octets transmitted to this address
- since it was added to the hostTimeTable (excluding
- framing bits but including FCS octets), except for
- those octets in bad packets."
- ::= { hostTimeEntry 6 }
-
- hostTimeOutOctets OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of octets transmitted by this address
- since it was added to the hostTimeTable (excluding
- framing bits but including FCS octets), including
- those octets in bad packets."
- ::= { hostTimeEntry 7 }
-
- hostTimeOutErrors OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of bad packets transmitted by this address
- since this host was added to the hostTimeTable."
- ::= { hostTimeEntry 8 }
-
- hostTimeOutBroadcastPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of good packets transmitted by this
- address that were directed to the broadcast address
- since this host was added to the hostTimeTable."
- ::= { hostTimeEntry 9 }
-
- hostTimeOutMulticastPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
-
-
- DESCRIPTION
- "The number of good packets transmitted by this
- address that were directed to a multicast address
- since this host was added to the hostTimeTable.
- Note that this number does not include packets
- directed to the broadcast address."
- ::= { hostTimeEntry 10 }
-
-
- -- The Host Top "N" Group
-
- -- Implementation of the Host Top N group is optional.
- --
- -- The Host Top N group requires the implementation of the
- -- host group.
- --
- -- The Host Top N group is used to prepare reports that
- -- describe the hosts that top a list ordered by one of
- -- their statistics.
- -- The available statistics are samples of one of their
- -- base statistics, over an interval specified by the
- -- management station. Thus, these statistics are rate
- -- based. The management station also selects how many such
- -- hosts are reported.
-
- -- The hostTopNControlTable is used to initiate the
- -- generation of such a report. The management station
- -- may select the parameters of such a report, such as
- -- which interface, which statistic, how many hosts,
- -- and the start and stop times of the sampling. When
- -- the report is prepared, entries are created in the
- -- hostTopNTable associated with the relevant
- -- hostTopNControlEntry. These entries are static for
- -- each report after it has been prepared.
-
- hostTopNControlTable OBJECT-TYPE
- SYNTAX SEQUENCE OF HostTopNControlEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of top N host control entries."
- ::= { hostTopN 1 }
-
- hostTopNControlEntry OBJECT-TYPE
- SYNTAX HostTopNControlEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
-
-
- "A set of parameters that control the creation of a
- report of the top N hosts according to several
- metrics. For example, an instance of the
- hostTopNDuration object might be named
- hostTopNDuration.3"
- INDEX { hostTopNControlIndex }
- ::= { hostTopNControlTable 1 }
-
- HostTopNControlEntry ::= SEQUENCE {
- hostTopNControlIndex INTEGER (1..65535),
- hostTopNHostIndex INTEGER (1..65535),
- hostTopNRateBase INTEGER,
- hostTopNTimeRemaining INTEGER,
- hostTopNDuration INTEGER,
- hostTopNRequestedSize INTEGER,
- hostTopNGrantedSize INTEGER,
- hostTopNStartTime TimeTicks,
- hostTopNOwner OwnerString,
- hostTopNStatus EntryStatus
- }
-
- hostTopNControlIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index that uniquely identifies an entry
- in the hostTopNControl table. Each such
- entry defines one top N report prepared for
- one interface."
- ::= { hostTopNControlEntry 1 }
-
- hostTopNHostIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The host table for which a top N report will be
- prepared on behalf of this entry. The host table
- identified by a particular value of this index is
- associated with the same host table as identified by
- the same value of hostIndex.
-
- This object may not be modified if the associated
- hostTopNStatus object is equal to valid(1)."
- ::= { hostTopNControlEntry 2 }
-
- hostTopNRateBase OBJECT-TYPE
-
-
- SYNTAX INTEGER {
- hostTopNInPkts(1),
- hostTopNOutPkts(2),
- hostTopNInOctets(3),
- hostTopNOutOctets(4),
- hostTopNOutErrors(5),
- hostTopNOutBroadcastPkts(6),
- hostTopNOutMulticastPkts(7)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The variable for each host that the hostTopNRate
- variable is based upon.
-
- This object may not be modified if the associated
- hostTopNStatus object is equal to valid(1)."
- ::= { hostTopNControlEntry 3 }
-
- hostTopNTimeRemaining OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The number of seconds left in the report currently
- being collected. When this object is modified by
- the management station, a new collection is started,
- possibly aborting a currently running report. The
- new value is used as the requested duration of this
- report, which is loaded into the associated
- hostTopNDuration object.
-
- When this object is set to a non-zero value, any
- associated hostTopNEntries shall be made
- inaccessible by the monitor. While the value of
- this object is non-zero, it decrements by one per
- second until it reaches zero. During this time, all
- associated hostTopNEntries shall remain
- inaccessible. At the time that this object
- decrements to zero, the report is made accessible in
- the hostTopNTable. Thus, the hostTopN table needs
- to be created only at the end of the collection
- interval."
- DEFVAL { 0 }
- ::= { hostTopNControlEntry 4 }
-
- hostTopNDuration OBJECT-TYPE
- SYNTAX INTEGER
-
-
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of seconds that this report has collected
- during the last sampling interval, or if this
- report is currently being collected, the number
- of seconds that this report is being collected
- during this sampling interval.
-
- When the associated hostTopNTimeRemaining object is
- set, this object shall be set by the probe to the
- same value and shall not be modified until the next
- time the hostTopNTimeRemaining is set.
-
- This value shall be zero if no reports have been
- requested for this hostTopNControlEntry."
- DEFVAL { 0 }
- ::= { hostTopNControlEntry 5 }
-
- hostTopNRequestedSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The maximum number of hosts requested for the top N
- table.
-
- When this object is created or modified, the probe
- should set hostTopNGrantedSize as closely to this
- object as is possible for the particular probe
- implementation and available resources."
- DEFVAL { 10 }
- ::= { hostTopNControlEntry 6 }
-
- hostTopNGrantedSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The maximum number of hosts in the top N table.
-
- When the associated hostTopNRequestedSize object is
- created or modified, the probe should set this
- object as closely to the requested value as is
- possible for the particular implementation and
- available resources. The probe must not lower this
- value except as a result of a set to the associated
- hostTopNRequestedSize object.
-
-
- Hosts with the highest value of hostTopNRate shall be
- placed in this table in decreasing order of this rate
- until there is no more room or until there are no more
- hosts."
- ::= { hostTopNControlEntry 7 }
-
- hostTopNStartTime OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The value of sysUpTime when this top N report was
- last started. In other words, this is the time that
- the associated hostTopNTimeRemaining object was
- modified to start the requested report."
- ::= { hostTopNControlEntry 8 }
-
- hostTopNOwner OBJECT-TYPE
- SYNTAX OwnerString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The entity that configured this entry and is
- therefore using the resources assigned to it."
- ::= { hostTopNControlEntry 9 }
-
- hostTopNStatus OBJECT-TYPE
- SYNTAX EntryStatus
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The status of this hostTopNControl entry.
-
- If this object is not equal to valid(1), all
- associated hostTopNEntries shall be deleted by the
- agent."
- ::= { hostTopNControlEntry 10 }
-
- hostTopNTable OBJECT-TYPE
- SYNTAX SEQUENCE OF HostTopNEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of top N host entries."
- ::= { hostTopN 2 }
-
- hostTopNEntry OBJECT-TYPE
- SYNTAX HostTopNEntry
-
-
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A set of statistics for a host that is part of a
- top N report. For example, an instance of the
- hostTopNRate object might be named
- hostTopNRate.3.10"
- INDEX { hostTopNReport, hostTopNIndex }
- ::= { hostTopNTable 1 }
-
- HostTopNEntry ::= SEQUENCE {
- hostTopNReport INTEGER (1..65535),
- hostTopNIndex INTEGER (1..65535),
- hostTopNAddress OCTET STRING,
- hostTopNRate INTEGER
- }
-
- hostTopNReport OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This object identifies the top N report of which
- this entry is a part. The set of hosts
- identified by a particular value of this
- object is part of the same report as identified
- by the same value of the hostTopNControlIndex object."
- ::= { hostTopNEntry 1 }
-
- hostTopNIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index that uniquely identifies an entry in
- the hostTopN table among those in the same report.
- This index is between 1 and N, where N is the
- number of entries in this table. Increasing values
- of hostTopNIndex shall be assigned to entries with
- decreasing values of hostTopNRate until index N
- is assigned to the entry with the lowest value of
- hostTopNRate or there are no more hostTopNEntries."
- ::= { hostTopNEntry 2 }
-
- hostTopNAddress OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
-
-
- DESCRIPTION
- "The physical address of this host."
- ::= { hostTopNEntry 3 }
-
- hostTopNRate OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The amount of change in the selected variable
- during this sampling interval. The selected
- variable is this host's instance of the object
- selected by hostTopNRateBase."
- ::= { hostTopNEntry 4 }
-
-
- -- The Matrix Group
-
- -- Implementation of the Matrix group is optional.
- --
- -- The Matrix group consists of the matrixControlTable,
- -- matrixSDTable and the matrixDSTable. These tables
- -- store statistics for a particular conversation
- -- between two addresses. As the device detects a new
- -- conversation, including those to a non-unicast
- -- address, it creates a new entry in both of the
- -- matrix tables. It must only create new entries
- -- based on information received in good packets. If
- -- the monitoring device finds itself short of
- -- resources, it may delete entries as needed. It is
- -- suggested that the device delete the least recently
- -- used entries first.
-
- matrixControlTable OBJECT-TYPE
- SYNTAX SEQUENCE OF MatrixControlEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of information entries for the
- traffic matrix on each interface."
- ::= { matrix 1 }
-
- matrixControlEntry OBJECT-TYPE
- SYNTAX MatrixControlEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "Information about a traffic matrix on a particular
-
-
- interface. For example, an instance of the
- matrixControlLastDeleteTime object might be named
- matrixControlLastDeleteTime.1"
- INDEX { matrixControlIndex }
- ::= { matrixControlTable 1 }
-
- MatrixControlEntry ::= SEQUENCE {
- matrixControlIndex INTEGER (1..65535),
- matrixControlDataSource OBJECT IDENTIFIER,
- matrixControlTableSize INTEGER,
- matrixControlLastDeleteTime TimeTicks,
- matrixControlOwner OwnerString,
- matrixControlStatus EntryStatus
- }
-
- matrixControlIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index that uniquely identifies an entry in the
- matrixControl table. Each such entry defines
- a function that discovers conversations on a
- particular interface and places statistics about
- them in the matrixSDTable and the matrixDSTable on
- behalf of this matrixControlEntry."
- ::= { matrixControlEntry 1 }
-
- matrixControlDataSource OBJECT-TYPE
- SYNTAX OBJECT IDENTIFIER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This object identifies the source of
- the data from which this entry creates a traffic
- matrix. This source can be any interface on this
- device. In order to identify a particular
- interface, this object shall identify the instance
- of the ifIndex object, defined in RFC 1213 and RFC
- 1573 [4,6], for the desired interface. For example,
- if an entry were to receive data from interface #1,
- this object would be set to ifIndex.1.
-
- The statistics in this group reflect all packets
- on the local network segment attached to the
- identified interface.
-
- An agent may or may not be able to tell if
-
-
- fundamental changes to the media of the interface
- have occurred and necessitate an invalidation of
- this entry. For example, a hot-pluggable ethernet
- card could be pulled out and replaced by a
- token-ring card. In such a case, if the agent has
- such knowledge of the change, it is recommended that
- it invalidate this entry.
-
- This object may not be modified if the associated
- matrixControlStatus object is equal to valid(1)."
- ::= { matrixControlEntry 2 }
-
- matrixControlTableSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of matrixSDEntries in the matrixSDTable
- for this interface. This must also be the value of
- the number of entries in the matrixDSTable for this
- interface."
- ::= { matrixControlEntry 3 }
-
- matrixControlLastDeleteTime OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The value of sysUpTime when the last entry
- was deleted from the portion of the matrixSDTable
- or matrixDSTable associated with this
- matrixControlEntry. If no deletions have occurred,
- this value shall be zero."
- ::= { matrixControlEntry 4 }
-
- matrixControlOwner OBJECT-TYPE
- SYNTAX OwnerString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The entity that configured this entry and is
- therefore using the resources assigned to it."
- ::= { matrixControlEntry 5 }
-
- matrixControlStatus OBJECT-TYPE
- SYNTAX EntryStatus
- ACCESS read-write
- STATUS mandatory
-
-
- DESCRIPTION
- "The status of this matrixControl entry.
-
- If this object is not equal to valid(1), all
- associated entries in the matrixSDTable and the
- matrixDSTable shall be deleted by the agent."
- ::= { matrixControlEntry 6 }
-
- matrixSDTable OBJECT-TYPE
- SYNTAX SEQUENCE OF MatrixSDEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of traffic matrix entries indexed by
- source and destination MAC address."
- ::= { matrix 2 }
-
- matrixSDEntry OBJECT-TYPE
- SYNTAX MatrixSDEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A collection of statistics for communications between
- two addresses on a particular interface. For example,
- an instance of the matrixSDPkts object might be named
- matrixSDPkts.1.6.8.0.32.27.3.176.6.8.0.32.10.8.113"
- INDEX { matrixSDIndex,
- matrixSDSourceAddress, matrixSDDestAddress }
- ::= { matrixSDTable 1 }
-
- MatrixSDEntry ::= SEQUENCE {
- matrixSDSourceAddress OCTET STRING,
- matrixSDDestAddress OCTET STRING,
- matrixSDIndex INTEGER (1..65535),
- matrixSDPkts Counter,
- matrixSDOctets Counter,
- matrixSDErrors Counter
- }
-
- matrixSDSourceAddress OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The source physical address."
- ::= { matrixSDEntry 1 }
-
- matrixSDDestAddress OBJECT-TYPE
-
-
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The destination physical address."
- ::= { matrixSDEntry 2 }
-
- matrixSDIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The set of collected matrix statistics of which
- this entry is a part. The set of matrix statistics
- identified by a particular value of this index
- is associated with the same matrixControlEntry
- as identified by the same value of
- matrixControlIndex."
- ::= { matrixSDEntry 3 }
-
- matrixSDPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of packets transmitted from the source
- address to the destination address (this number
- includes bad packets)."
- ::= { matrixSDEntry 4 }
-
- matrixSDOctets OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of octets (excluding framing bits but
- including FCS octets) contained in all packets
- transmitted from the source address to the
- destination address."
- ::= { matrixSDEntry 5 }
-
- matrixSDErrors OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of bad packets transmitted from
- the source address to the destination address."
-
-
- ::= { matrixSDEntry 6 }
-
-
- -- Traffic matrix tables from destination to source
-
- matrixDSTable OBJECT-TYPE
- SYNTAX SEQUENCE OF MatrixDSEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of traffic matrix entries indexed by
- destination and source MAC address."
- ::= { matrix 3 }
-
- matrixDSEntry OBJECT-TYPE
- SYNTAX MatrixDSEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A collection of statistics for communications between
- two addresses on a particular interface. For example,
- an instance of the matrixSDPkts object might be named
- matrixSDPkts.1.6.8.0.32.10.8.113.6.8.0.32.27.3.176"
- INDEX { matrixDSIndex,
- matrixDSDestAddress, matrixDSSourceAddress }
- ::= { matrixDSTable 1 }
-
- MatrixDSEntry ::= SEQUENCE {
- matrixDSSourceAddress OCTET STRING,
- matrixDSDestAddress OCTET STRING,
- matrixDSIndex INTEGER (1..65535),
- matrixDSPkts Counter,
- matrixDSOctets Counter,
- matrixDSErrors Counter
- }
-
- matrixDSSourceAddress OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The source physical address."
- ::= { matrixDSEntry 1 }
-
- matrixDSDestAddress OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
-
-
- DESCRIPTION
- "The destination physical address."
- ::= { matrixDSEntry 2 }
-
- matrixDSIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The set of collected matrix statistics of which
- this entry is a part. The set of matrix statistics
- identified by a particular value of this index
- is associated with the same matrixControlEntry
- as identified by the same value of
- matrixControlIndex."
- ::= { matrixDSEntry 3 }
-
- matrixDSPkts OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of packets transmitted from the source
- address to the destination address (this number
- includes bad packets)."
- ::= { matrixDSEntry 4 }
-
- matrixDSOctets OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of octets (excluding framing bits
- but including FCS octets) contained in all packets
- transmitted from the source address to the
- destination address."
- ::= { matrixDSEntry 5 }
-
- matrixDSErrors OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of bad packets transmitted from
- the source address to the destination address."
- ::= { matrixDSEntry 6 }
-
-
-
-
- -- The Filter Group
-
- -- Implementation of the Filter group is optional.
- --
- -- The Filter group allows packets to be captured with an
- -- arbitrary filter expression. A logical data and
- -- event stream or "channel" is formed by the packets
- -- that match the filter expression.
- --
- -- This filter mechanism allows the creation of an arbitrary
- -- logical expression with which to filter packets. Each
- -- filter associated with a channel is OR'ed with the others.
- -- Within a filter, any bits checked in the data and status
- -- are AND'ed with respect to other bits in the same filter.
- -- The NotMask also allows for checking for inequality.
- -- Finally, the channelAcceptType object allows for
- -- inversion of the whole equation.
- --
- -- If a management station wishes to receive a trap to alert
- -- it that new packets have been captured and are available
- -- for download, it is recommended that it set up an alarm
- -- entry that monitors the value of the relevant
- -- channelMatches instance.
- --
- -- The channel can be turned on or off, and can also
- -- generate events when packets pass through it.
-
- filterTable OBJECT-TYPE
- SYNTAX SEQUENCE OF FilterEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of packet filter entries."
- ::= { filter 1 }
-
- filterEntry OBJECT-TYPE
- SYNTAX FilterEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A set of parameters for a packet filter applied on a
- particular interface. As an example, an instance of
- the filterPktData object might be named
- filterPktData.12"
- INDEX { filterIndex }
- ::= { filterTable 1 }
-
-
-
-
- FilterEntry ::= SEQUENCE {
- filterIndex INTEGER (1..65535),
- filterChannelIndex INTEGER (1..65535),
- filterPktDataOffset INTEGER,
- filterPktData OCTET STRING,
- filterPktDataMask OCTET STRING,
- filterPktDataNotMask OCTET STRING,
- filterPktStatus INTEGER,
- filterPktStatusMask INTEGER,
- filterPktStatusNotMask INTEGER,
- filterOwner OwnerString,
- filterStatus EntryStatus
- }
-
- filterIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index that uniquely identifies an entry
- in the filter table. Each such entry defines
- one filter that is to be applied to every packet
- received on an interface."
- ::= { filterEntry 1 }
-
- filterChannelIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This object identifies the channel of which this
- filter is a part. The filters identified by a
- particular value of this object are associated with
- the same channel as identified by the same value of
- the channelIndex object."
- ::= { filterEntry 2 }
-
- filterPktDataOffset OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The offset from the beginning of each packet where
- a match of packet data will be attempted. This offset
- is measured from the point in the physical layer
- packet after the framing bits, if any. For example,
- in an Ethernet frame, this point is at the beginning
- of the destination MAC address.
-
-
- This object may not be modified if the associated
- filterStatus object is equal to valid(1)."
- DEFVAL { 0 }
- ::= { filterEntry 3 }
-
- filterPktData OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The data that is to be matched with the input
- packet. For each packet received, this filter and
- the accompanying filterPktDataMask and
- filterPktDataNotMask will be adjusted for the
- offset. The only bits relevant to this match
- algorithm are those that have the corresponding
- filterPktDataMask bit equal to one. The following
- three rules are then applied to every packet:
-
- (1) If the packet is too short and does not have data
- corresponding to part of the filterPktData, the
- packet will fail this data match.
-
- (2) For each relevant bit from the packet with the
- corresponding filterPktDataNotMask bit set to
- zero, if the bit from the packet is not equal to
- the corresponding bit from the filterPktData,
- then the packet will fail this data match.
-
- (3) If for every relevant bit from the packet with the
- corresponding filterPktDataNotMask bit set to one,
- the bit from the packet is equal to the
- corresponding bit from the filterPktData, then
- the packet will fail this data match.
-
- Any packets that have not failed any of the three
- matches above have passed this data match. In
- particular, a zero length filter will match any
- packet.
-
- This object may not be modified if the associated
- filterStatus object is equal to valid(1)."
- ::= { filterEntry 4 }
-
- filterPktDataMask OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-write
- STATUS mandatory
-
-
- DESCRIPTION
- "The mask that is applied to the match process.
- After adjusting this mask for the offset, only those
- bits in the received packet that correspond to bits
- set in this mask are relevant for further processing
- by the match algorithm. The offset is applied to
- filterPktDataMask in the same way it is applied to the
- filter. For the purposes of the matching algorithm,
- if the associated filterPktData object is longer
- than this mask, this mask is conceptually extended
- with '1' bits until it reaches the length of the
- filterPktData object.
-
- This object may not be modified if the associated
- filterStatus object is equal to valid(1)."
- ::= { filterEntry 5 }
-
- filterPktDataNotMask OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The inversion mask that is applied to the match
- process. After adjusting this mask for the offset,
- those relevant bits in the received packet that
- correspond to bits cleared in this mask must all be
- equal to their corresponding bits in the
- filterPktData object for the packet to be accepted.
- In addition, at least one of those relevant bits in
- the received packet that correspond to bits set in
- this mask must be different to its corresponding bit
- in the filterPktData object.
-
- For the purposes of the matching algorithm, if the
- associated filterPktData object is longer than this
- mask, this mask is conceptually extended with '0'
- bits until it reaches the length of the
- filterPktData object.
-
- This object may not be modified if the associated
- filterStatus object is equal to valid(1)."
- ::= { filterEntry 6 }
-
- filterPktStatus OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
-
-
- "The status that is to be matched with the input
- packet. The only bits relevant to this match
- algorithm are those that have the corresponding
- filterPktStatusMask bit equal to one. The following
- two rules are then applied to every packet:
-
- (1) For each relevant bit from the packet status
- with the corresponding filterPktStatusNotMask bit
- set to zero, if the bit from the packet status is
- not equal to the corresponding bit from the
- filterPktStatus, then the packet will fail this
- status match.
-
- (2) If for every relevant bit from the packet status
- with the corresponding filterPktStatusNotMask bit
- set to one, the bit from the packet status is
- equal to the corresponding bit from the
- filterPktStatus, then the packet will fail this
- status match.
-
- Any packets that have not failed either of the two
- matches above have passed this status match. In
- particular, a zero length status filter will match any
- packet's status.
-
- The value of the packet status is a sum. This sum
- initially takes the value zero. Then, for each
- error, E, that has been discovered in this packet,
- 2 raised to a value representing E is added to the
- sum. The errors and the bits that represent them are
- dependent on the media type of the interface that
- this channel is receiving packets from.
-
- The errors defined for a packet captured off of an
- Ethernet interface are as follows:
-
- bit # Error
- 0 Packet is longer than 1518 octets
- 1 Packet is shorter than 64 octets
- 2 Packet experienced a CRC or Alignment
- error
-
- For example, an Ethernet fragment would have a
- value of 6 (2^1 + 2^2).
-
- As this MIB is expanded to new media types, this
- object will have other media-specific errors
- defined.
-
-
- For the purposes of this status matching algorithm,
- if the packet status is longer than this
- filterPktStatus object, this object is conceptually
- extended with '0' bits until it reaches the size of
- the packet status.
-
- This object may not be modified if the associated
- filterStatus object is equal to valid(1)."
- ::= { filterEntry 7 }
-
- filterPktStatusMask OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The mask that is applied to the status match
- process. Only those bits in the received packet
- that correspond to bits set in this mask are
- relevant for further processing by the status match
- algorithm. For the purposes of the matching
- algorithm, if the associated filterPktStatus object
- is longer than this mask, this mask is conceptually
- extended with '1' bits until it reaches the size of
- the filterPktStatus. In addition, if a packet
- status is longer than this mask, this mask is
- conceptually extended with '0' bits until it reaches
- the size of the packet status.
-
- This object may not be modified if the associated
- filterStatus object is equal to valid(1)."
- ::= { filterEntry 8 }
-
- filterPktStatusNotMask OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The inversion mask that is applied to the status
- match process. Those relevant bits in the received
- packet status that correspond to bits cleared in
- this mask must all be equal to their corresponding
- bits in the filterPktStatus object for the packet to
- be accepted. In addition, at least one of those
- relevant bits in the received packet status that
- correspond to bits set in this mask must be
- different to its corresponding bit in the
- filterPktStatus object for the packet to be
- accepted.
-
-
- For the purposes of the matching algorithm, if the
- associated filterPktStatus object or a packet status
- is longer than this mask, this mask is conceptually
- extended with '0' bits until it reaches the longer
- of the lengths of the filterPktStatus object and the
- packet status.
-
- This object may not be modified if the associated
- filterStatus object is equal to valid(1)."
- ::= { filterEntry 9 }
-
- filterOwner OBJECT-TYPE
- SYNTAX OwnerString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The entity that configured this entry and is
- therefore using the resources assigned to it."
- ::= { filterEntry 10 }
-
- filterStatus OBJECT-TYPE
- SYNTAX EntryStatus
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The status of this filter entry."
- ::= { filterEntry 11 }
-
- channelTable OBJECT-TYPE
- SYNTAX SEQUENCE OF ChannelEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of packet channel entries."
- ::= { filter 2 }
-
- channelEntry OBJECT-TYPE
- SYNTAX ChannelEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A set of parameters for a packet channel applied on a
- particular interface. As an example, an instance of
- the channelMatches object might be named
- channelMatches.3"
- INDEX { channelIndex }
- ::= { channelTable 1 }
-
-
-
- ChannelEntry ::= SEQUENCE {
- channelIndex INTEGER (1..65535),
- channelIfIndex INTEGER (1..65535),
- channelAcceptType INTEGER,
- channelDataControl INTEGER,
- channelTurnOnEventIndex INTEGER (0..65535),
- channelTurnOffEventIndex INTEGER (0..65535),
- channelEventIndex INTEGER (0..65535),
- channelEventStatus INTEGER,
- channelMatches Counter,
- channelDescription DisplayString (SIZE (0..127)),
- channelOwner OwnerString,
- channelStatus EntryStatus
- }
-
- channelIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index that uniquely identifies an entry in the
- channel table. Each such entry defines one channel,
- a logical data and event stream.
-
- It is suggested that before creating a channel, an
- application should scan all instances of the
- filterChannelIndex object to make sure that there
- are no pre-existing filters that would be
- inadvertently be linked to the channel."
- ::= { channelEntry 1 }
-
- channelIfIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The value of this object uniquely identifies the
- interface on this remote network monitoring device
- to which the associated filters are applied to allow
- data into this channel. The interface identified by
- a particular value of this object is the same
- interface as identified by the same value of the
- ifIndex object, defined in RFC 1213 and RFC 1573
- [4,6].
-
- The filters in this group are applied to all packets
- on the local network segment attached to the
- identified interface.
-
-
- An agent may or may not be able to tell if
- fundamental changes to the media of the interface
- have occurred and necessitate an invalidation of
- this entry. For example, a hot-pluggable ethernet
- card could be pulled out and replaced by a
- token-ring card. In such a case, if the agent has
- such knowledge of the change, it is recommended that
- it invalidate this entry.
-
- This object may not be modified if the associated
- channelStatus object is equal to valid(1)."
- ::= { channelEntry 2 }
-
- channelAcceptType OBJECT-TYPE
- SYNTAX INTEGER {
- acceptMatched(1),
- acceptFailed(2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "This object controls the action of the filters
- associated with this channel. If this object is equal
- to acceptMatched(1), packets will be accepted to this
- channel if they are accepted by both the packet data
- and packet status matches of an associated filter. If
- this object is equal to acceptFailed(2), packets will
- be accepted to this channel only if they fail either
- the packet data match or the packet status match of
- each of the associated filters.
-
- In particular, a channel with no associated filters
- will match no packets if set to acceptMatched(1)
- case and will match all packets in the
- acceptFailed(2) case.
-
- This object may not be modified if the associated
- channelStatus object is equal to valid(1)."
- ::= { channelEntry 3 }
-
- channelDataControl OBJECT-TYPE
- SYNTAX INTEGER {
- on(1),
- off(2)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
-
-
- "This object controls the flow of data through this
- channel. If this object is on(1), data, status and
- events flow through this channel. If this object is
- off(2), data, status and events will not flow
- through this channel."
- DEFVAL { off }
- ::= { channelEntry 4 }
-
- channelTurnOnEventIndex OBJECT-TYPE
- SYNTAX INTEGER (0..65535)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The value of this object identifies the event
- that is configured to turn the associated
- channelDataControl from off to on when the event is
- generated. The event identified by a particular value
- of this object is the same event as identified by the
- same value of the eventIndex object. If there is no
- corresponding entry in the eventTable, then no
- association exists. In fact, if no event is intended
- for this channel, channelTurnOnEventIndex must be
- set to zero, a non-existent event index.
-
- This object may not be modified if the associated
- channelStatus object is equal to valid(1)."
- ::= { channelEntry 5 }
-
- channelTurnOffEventIndex OBJECT-TYPE
- SYNTAX INTEGER (0..65535)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The value of this object identifies the event
- that is configured to turn the associated
- channelDataControl from on to off when the event is
- generated. The event identified by a particular value
- of this object is the same event as identified by the
- same value of the eventIndex object. If there is no
- corresponding entry in the eventTable, then no
- association exists. In fact, if no event is intended
- for this channel, channelTurnOffEventIndex must be
- set to zero, a non-existent event index.
-
- This object may not be modified if the associated
- channelStatus object is equal to valid(1)."
- ::= { channelEntry 6 }
-
-
-
- channelEventIndex OBJECT-TYPE
- SYNTAX INTEGER (0..65535)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The value of this object identifies the event
- that is configured to be generated when the
- associated channelDataControl is on and a packet
- is matched. The event identified by a particular
- value of this object is the same event as identified
- by the same value of the eventIndex object. If
- there is no corresponding entry in the eventTable,
- then no association exists. In fact, if no event is
- intended for this channel, channelEventIndex must be
- set to zero, a non-existent event index.
-
- This object may not be modified if the associated
- channelStatus object is equal to valid(1)."
- ::= { channelEntry 7 }
-
- channelEventStatus OBJECT-TYPE
- SYNTAX INTEGER {
- eventReady(1),
- eventFired(2),
- eventAlwaysReady(3)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The event status of this channel.
-
- If this channel is configured to generate events
- when packets are matched, a means of controlling
- the flow of those events is often needed. When
- this object is equal to eventReady(1), a single
- event may be generated, after which this object
- will be set by the probe to eventFired(2). While
- in the eventFired(2) state, no events will be
- generated until the object is modified to
- eventReady(1) (or eventAlwaysReady(3)). The
- management station can thus easily respond to a
- notification of an event by re-enabling this object.
-
- If the management station wishes to disable this
- flow control and allow events to be generated
- at will, this object may be set to
- eventAlwaysReady(3). Disabling the flow control
- is discouraged as it can result in high network
-
-
- traffic or other performance problems."
- DEFVAL { eventReady }
- ::= { channelEntry 8 }
-
- channelMatches OBJECT-TYPE
- SYNTAX Counter
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of times this channel has matched a
- packet. Note that this object is updated even when
- channelDataControl is set to off."
- ::= { channelEntry 9 }
-
- channelDescription OBJECT-TYPE
- SYNTAX DisplayString (SIZE (0..127))
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "A comment describing this channel."
- ::= { channelEntry 10 }
-
- channelOwner OBJECT-TYPE
- SYNTAX OwnerString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The entity that configured this entry and is
- therefore using the resources assigned to it."
- ::= { channelEntry 11 }
-
- channelStatus OBJECT-TYPE
- SYNTAX EntryStatus
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The status of this channel entry."
- ::= { channelEntry 12 }
-
-
- -- The Packet Capture Group
-
- -- Implementation of the Packet Capture group is optional.
- --
- -- The Packet Capture Group requires implementation of the
- -- Filter Group.
- --
- -- The Packet Capture group allows packets to be captured
-
-
- -- upon a filter match. The bufferControlTable controls
- -- the captured packets output from a channel that is
- -- associated with it. The captured packets are placed
- -- in entries in the captureBufferTable. These entries are
- -- associated with the bufferControlEntry on whose behalf they
- -- were stored.
-
- bufferControlTable OBJECT-TYPE
- SYNTAX SEQUENCE OF BufferControlEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of buffers control entries."
- ::= { capture 1 }
-
- bufferControlEntry OBJECT-TYPE
- SYNTAX BufferControlEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A set of parameters that control the collection of
- a stream of packets that have matched filters. As
- an example, an instance of the
- bufferControlCaptureSliceSize object might be named
- bufferControlCaptureSliceSize.3"
- INDEX { bufferControlIndex }
- ::= { bufferControlTable 1 }
-
- BufferControlEntry ::= SEQUENCE {
- bufferControlIndex INTEGER (1..65535),
- bufferControlChannelIndex INTEGER (1..65535),
- bufferControlFullStatus INTEGER,
- bufferControlFullAction INTEGER,
- bufferControlCaptureSliceSize INTEGER,
- bufferControlDownloadSliceSize INTEGER,
- bufferControlDownloadOffset INTEGER,
- bufferControlMaxOctetsRequested INTEGER,
- bufferControlMaxOctetsGranted INTEGER,
- bufferControlCapturedPackets INTEGER,
- bufferControlTurnOnTime TimeTicks,
- bufferControlOwner OwnerString,
- bufferControlStatus EntryStatus
- }
-
- bufferControlIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
-
-
- DESCRIPTION
- "An index that uniquely identifies an entry
- in the bufferControl table. The value of this
- index shall never be zero. Each such
- entry defines one set of packets that is
- captured and controlled by one or more filters."
- ::= { bufferControlEntry 1 }
-
- bufferControlChannelIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "An index that identifies the channel that is the
- source of packets for this bufferControl table.
- The channel identified by a particular value of this
- index is the same as identified by the same value of
- the channelIndex object.
-
- This object may not be modified if the associated
- bufferControlStatus object is equal to valid(1)."
- ::= { bufferControlEntry 2 }
-
- bufferControlFullStatus OBJECT-TYPE
- SYNTAX INTEGER {
- spaceAvailable(1),
- full(2)
- }
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "This object shows whether the buffer has room to
- accept new packets or if it is full.
-
- If the status is spaceAvailable(1), the buffer is
- accepting new packets normally. If the status is
- full(2) and the associated bufferControlFullAction
- object is wrapWhenFull, the buffer is accepting new
- packets by deleting enough of the oldest packets
- to make room for new ones as they arrive. Otherwise,
- if the status is full(2) and the
- bufferControlFullAction object is lockWhenFull,
- then the buffer has stopped collecting packets.
-
- When this object is set to full(2) the probe must
- not later set it to spaceAvailable(1) except in the
- case of a significant gain in resources such as
- an increase of bufferControlOctetsGranted. In
-
-
- particular, the wrap-mode action of deleting old
- packets to make room for newly arrived packets
- must not affect the value of this object."
- ::= { bufferControlEntry 3 }
-
- bufferControlFullAction OBJECT-TYPE
- SYNTAX INTEGER {
- lockWhenFull(1),
- wrapWhenFull(2) -- FIFO
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "Controls the action of the buffer when it
- reaches the full status. When in the lockWhenFull(1)
- state and a packet is added to the buffer that
- fills the buffer, the bufferControlFullStatus will
- be set to full(2) and this buffer will stop capturing
- packets."
- ::= { bufferControlEntry 4 }
-
- bufferControlCaptureSliceSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The maximum number of octets of each packet
- that will be saved in this capture buffer.
- For example, if a 1500 octet packet is received by
- the probe and this object is set to 500, then only
- 500 octets of the packet will be stored in the
- associated capture buffer. If this variable is set
- to 0, the capture buffer will save as many octets
- as is possible.
-
- This object may not be modified if the associated
- bufferControlStatus object is equal to valid(1)."
- DEFVAL { 100 }
- ::= { bufferControlEntry 5 }
-
- bufferControlDownloadSliceSize OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The maximum number of octets of each packet
- in this capture buffer that will be returned in
- an SNMP retrieval of that packet. For example,
-
-
- if 500 octets of a packet have been stored in the
- associated capture buffer, the associated
- bufferControlDownloadOffset is 0, and this
- object is set to 100, then the captureBufferPacket
- object that contains the packet will contain only
- the first 100 octets of the packet.
-
- A prudent manager will take into account possible
- interoperability or fragmentation problems that may
- occur if the download slice size is set too large.
- In particular, conformant SNMP implementations are not
- required to accept messages whose length exceeds 484
- octets, although they are encouraged to support larger
- datagrams whenever feasible."
- DEFVAL { 100 }
- ::= { bufferControlEntry 6 }
-
- bufferControlDownloadOffset OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The offset of the first octet of each packet
- in this capture buffer that will be returned in
- an SNMP retrieval of that packet. For example,
- if 500 octets of a packet have been stored in the
- associated capture buffer and this object is set to
- 100, then the captureBufferPacket object that
- contains the packet will contain bytes starting
- 100 octets into the packet."
- DEFVAL { 0 }
- ::= { bufferControlEntry 7 }
-
- bufferControlMaxOctetsRequested OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The requested maximum number of octets to be
- saved in this captureBuffer, including any
- implementation-specific overhead. If this variable
- is set to -1, the capture buffer will save as many
- octets as is possible.
-
- When this object is created or modified, the probe
- should set bufferControlMaxOctetsGranted as closely
- to this object as is possible for the particular probe
- implementation and available resources. However, if
-
-
- the object has the special value of -1, the probe
- must set bufferControlMaxOctetsGranted to -1."
- DEFVAL { -1 }
- ::= { bufferControlEntry 8 }
-
- bufferControlMaxOctetsGranted OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The maximum number of octets that can be
- saved in this captureBuffer, including overhead.
- If this variable is -1, the capture buffer will save
- as many octets as possible.
-
- When the bufferControlMaxOctetsRequested object is
- created or modified, the probe should set this object
- as closely to the requested value as is possible for
- the particular probe implementation and available
- resources.
- However, if the request object has the special value
- of -1, the probe must set this object to -1.
- The probe must not lower this value except as a result
- of a modification to the associated
- bufferControlMaxOctetsRequested object.
-
- When this maximum number of octets is reached
- and a new packet is to be added to this
- capture buffer and the corresponding
- bufferControlFullAction is set to wrapWhenFull(2),
- enough of the oldest packets associated with this
- capture buffer shall be deleted by the agent so
- that the new packet can be added. If the
- corresponding bufferControlFullAction is set to
- lockWhenFull(1), the new packet shall be discarded.
- In either case, the probe must set
- bufferControlFullStatus to full(2).
-
- When the value of this object changes to a value less
- than the current value, entries are deleted from
- the captureBufferTable associated with this
- bufferControlEntry. Enough of the
- oldest of these captureBufferEntries shall be
- deleted by the agent so that the number of octets
- used remains less than or equal to the new value of
- this object.
-
- When the value of this object changes to a value
-
-
- greater than the current value, the number of
- associated captureBufferEntries may be allowed to
- grow."
- ::= { bufferControlEntry 9 }
-
- bufferControlCapturedPackets OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of packets currently in this
- captureBuffer."
- ::= { bufferControlEntry 10 }
-
- bufferControlTurnOnTime OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The value of sysUpTime when this capture buffer was
- first turned on."
- ::= { bufferControlEntry 11 }
-
- bufferControlOwner OBJECT-TYPE
- SYNTAX OwnerString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The entity that configured this entry and is
- therefore using the resources assigned to it."
- ::= { bufferControlEntry 12 }
-
- bufferControlStatus OBJECT-TYPE
- SYNTAX EntryStatus
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The status of this buffer Control Entry."
- ::= { bufferControlEntry 13 }
-
- captureBufferTable OBJECT-TYPE
- SYNTAX SEQUENCE OF CaptureBufferEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of packets captured off of a channel."
- ::= { capture 2 }
-
-
-
- captureBufferEntry OBJECT-TYPE
- SYNTAX CaptureBufferEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A packet captured off of an attached network. As an
- example, an instance of the captureBufferPacketData
- object might be named captureBufferPacketData.3.1783"
- INDEX { captureBufferControlIndex, captureBufferIndex }
- ::= { captureBufferTable 1 }
-
- CaptureBufferEntry ::= SEQUENCE {
- captureBufferControlIndex INTEGER (1..65535),
- captureBufferIndex INTEGER (1..2147483647),
- captureBufferPacketID INTEGER,
- captureBufferPacketData OCTET STRING,
- captureBufferPacketLength INTEGER,
- captureBufferPacketTime INTEGER,
- captureBufferPacketStatus INTEGER
- }
-
- captureBufferControlIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The index of the bufferControlEntry with which
- this packet is associated."
- ::= { captureBufferEntry 1 }
-
- captureBufferIndex OBJECT-TYPE
- SYNTAX INTEGER (1..2147483647)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index that uniquely identifies an entry
- in the captureBuffer table associated with a
- particular bufferControlEntry. This index will
- start at 1 and increase by one for each new packet
- added with the same captureBufferControlIndex.
-
- Should this value reach 2147483647, the next packet
- added with the same captureBufferControlIndex shall
- cause this value to wrap around to 1."
- ::= { captureBufferEntry 2 }
-
- captureBufferPacketID OBJECT-TYPE
- SYNTAX INTEGER
-
-
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index that describes the order of packets
- that are received on a particular interface.
- The packetID of a packet captured on an
- interface is defined to be greater than the
- packetID's of all packets captured previously on
- the same interface. As the captureBufferPacketID
- object has a maximum positive value of 2^31 - 1,
- any captureBufferPacketID object shall have the
- value of the associated packet's packetID mod 2^31."
- ::= { captureBufferEntry 3 }
-
- captureBufferPacketData OBJECT-TYPE
- SYNTAX OCTET STRING
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The data inside the packet, starting at the
- beginning of the packet plus any offset specified in
- the associated bufferControlDownloadOffset,
- including any link level headers. The length of the
- data in this object is the minimum of the length of
- the captured packet minus the offset, the length of
- the associated bufferControlCaptureSliceSize minus
- the offset, and the associated
- bufferControlDownloadSliceSize. If this minimum is
- less than zero, this object shall have a length of
- zero."
- ::= { captureBufferEntry 4 }
-
- captureBufferPacketLength OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The actual length (off the wire) of the packet stored
- in this entry, including FCS octets."
- ::= { captureBufferEntry 5 }
-
- captureBufferPacketTime OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The number of milliseconds that had passed since
- this capture buffer was first turned on when this
-
-
- packet was captured."
- ::= { captureBufferEntry 6 }
-
- captureBufferPacketStatus OBJECT-TYPE
- SYNTAX INTEGER
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "A value which indicates the error status of this
- packet.
-
- The value of this object is defined in the same way as
- filterPktStatus. The value is a sum. This sum
- initially takes the value zero. Then, for each
- error, E, that has been discovered in this packet,
- 2 raised to a value representing E is added to the
- sum.
-
- The errors defined for a packet captured off of an
- Ethernet interface are as follows:
-
- bit # Error
- 0 Packet is longer than 1518 octets
- 1 Packet is shorter than 64 octets
- 2 Packet experienced a CRC or Alignment
- error
- 3 First packet in this capture buffer after
- it was detected that some packets were
- not processed correctly.
- 4 Packet's order in buffer is only
- approximate (May only be set for packets
- sent from the probe)
-
- For example, an Ethernet fragment would have a
- value of 6 (2^1 + 2^2).
-
- As this MIB is expanded to new media types, this
- object will have other media-specific errors defined."
- ::= { captureBufferEntry 7 }
-
-
- -- The Event Group
-
- -- Implementation of the Event group is optional.
- --
- -- The Event group controls the generation and notification
- -- of events from this device. Each entry in the eventTable
- -- describes the parameters of the event that can be
-
-
- -- triggered. Each event entry is fired by an associated
- -- condition located elsewhere in the MIB. An event entry
- -- may also be associated- with a function elsewhere in the
- -- MIB that will be executed when the event is generated. For
- -- example, a channel may be turned on or off by the firing
- -- of an event.
- --
- -- Each eventEntry may optionally specify that a log entry
- -- be created on its behalf whenever the event occurs.
- -- Each entry may also specify that notification should
- -- occur by way of SNMP trap messages. In this case, the
- -- community for the trap message is given in the associated
- -- eventCommunity object. The enterprise and specific trap
- -- fields of the trap are determined by the condition that
- -- triggered the event. Two traps are defined: risingAlarm
- -- and fallingAlarm. If the eventTable is triggered by a
- -- condition specified elsewhere, the enterprise and
- -- specific trap fields must be specified for traps
- -- generated for that condition.
-
- eventTable OBJECT-TYPE
- SYNTAX SEQUENCE OF EventEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A list of events to be generated."
- ::= { event 1 }
-
- eventEntry OBJECT-TYPE
- SYNTAX EventEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A set of parameters that describe an event to be
- generated when certain conditions are met. As an
- example, an instance of the eventLastTimeSent object
- might be named eventLastTimeSent.6"
- INDEX { eventIndex }
- ::= { eventTable 1 }
-
- EventEntry ::= SEQUENCE {
- eventIndex INTEGER (1..65535),
- eventDescription DisplayString (SIZE (0..127)),
- eventType INTEGER,
- eventCommunity OCTET STRING (SIZE (0..127)),
- eventLastTimeSent TimeTicks,
- eventOwner OwnerString,
- eventStatus EntryStatus
-
-
- }
-
- eventIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index that uniquely identifies an entry in the
- event table. Each such entry defines one event that
- is to be generated when the appropriate conditions
- occur."
- ::= { eventEntry 1 }
-
- eventDescription OBJECT-TYPE
- SYNTAX DisplayString (SIZE (0..127))
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "A comment describing this event entry."
- ::= { eventEntry 2 }
-
- eventType OBJECT-TYPE
- SYNTAX INTEGER {
- none(1),
- log(2),
- snmp-trap(3), -- send an SNMP trap
- log-and-trap(4)
- }
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The type of notification that the probe will make
- about this event. In the case of log, an entry is
- made in the log table for each event. In the case of
- snmp-trap, an SNMP trap is sent to one or more
- management stations."
- ::= { eventEntry 3 }
-
- eventCommunity OBJECT-TYPE
- SYNTAX OCTET STRING (SIZE (0..127))
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "If an SNMP trap is to be sent, it will be sent to
- the SNMP community specified by this octet string.
- In the future this table will be extended to include
- the party security mechanism. This object shall be
- set to a string of length zero if it is intended that
-
-
- that mechanism be used to specify the destination of
- the trap."
- ::= { eventEntry 4 }
-
- eventLastTimeSent OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The value of sysUpTime at the time this event
- entry last generated an event. If this entry has
- not generated any events, this value will be
- zero."
- ::= { eventEntry 5 }
-
- eventOwner OBJECT-TYPE
- SYNTAX OwnerString
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The entity that configured this entry and is
- therefore using the resources assigned to it.
-
- If this object contains a string starting with
- 'monitor' and has associated entries in the log
- table, all connected management stations should
- retrieve those log entries, as they may have
- significance to all management stations connected to
- this device"
- ::= { eventEntry 6 }
-
- eventStatus OBJECT-TYPE
- SYNTAX EntryStatus
- ACCESS read-write
- STATUS mandatory
- DESCRIPTION
- "The status of this event entry.
-
- If this object is not equal to valid(1), all
- associated log entries shall be deleted by the
- agent."
- ::= { eventEntry 7 }
-
- --
- logTable OBJECT-TYPE
- SYNTAX SEQUENCE OF LogEntry
- ACCESS not-accessible
- STATUS mandatory
-
-
- DESCRIPTION
- "A list of events that have been logged."
- ::= { event 2 }
-
- logEntry OBJECT-TYPE
- SYNTAX LogEntry
- ACCESS not-accessible
- STATUS mandatory
- DESCRIPTION
- "A set of data describing an event that has been
- logged. For example, an instance of the
- logDescription object might be named
- logDescription.6.47"
- INDEX { logEventIndex, logIndex }
- ::= { logTable 1 }
-
- LogEntry ::= SEQUENCE {
- logEventIndex INTEGER (1..65535),
- logIndex INTEGER (1..2147483647),
- logTime TimeTicks,
- logDescription DisplayString (SIZE (0..255))
- }
-
- logEventIndex OBJECT-TYPE
- SYNTAX INTEGER (1..65535)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The event entry that generated this log
- entry. The log identified by a particular
- value of this index is associated with the same
- eventEntry as identified by the same value
- of eventIndex."
- ::= { logEntry 1 }
-
- logIndex OBJECT-TYPE
- SYNTAX INTEGER (1..2147483647)
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An index that uniquely identifies an entry
- in the log table amongst those generated by the
- same eventEntries. These indexes are
- assigned beginning with 1 and increase by one
- with each new log entry. The association
- between values of logIndex and logEntries
- is fixed for the lifetime of each logEntry.
- The agent may choose to delete the oldest
-
-
- instances of logEntry as required because of
- lack of memory. It is an implementation-specific
- matter as to when this deletion may occur."
- ::= { logEntry 2 }
-
- logTime OBJECT-TYPE
- SYNTAX TimeTicks
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "The value of sysUpTime when this log entry was
- created."
- ::= { logEntry 3 }
-
- logDescription OBJECT-TYPE
- SYNTAX DisplayString (SIZE (0..255))
- ACCESS read-only
- STATUS mandatory
- DESCRIPTION
- "An implementation dependent description of the
- event that activated this log entry."
- ::= { logEntry 4 }
-
- -- These definitions use the TRAP-TYPE macro as
- -- defined in RFC 1215 [10]
-
- -- Remote Network Monitoring Traps
-
- risingAlarm TRAP-TYPE
- ENTERPRISE rmon
- VARIABLES { alarmIndex, alarmVariable, alarmSampleType,
- alarmValue, alarmRisingThreshold }
- DESCRIPTION
- "The SNMP trap that is generated when an alarm
- entry crosses its rising threshold and generates
- an event that is configured for sending SNMP
- traps."
- ::= 1
-
- fallingAlarm TRAP-TYPE
- ENTERPRISE rmon
- VARIABLES { alarmIndex, alarmVariable, alarmSampleType,
- alarmValue, alarmFallingThreshold }
- DESCRIPTION
- "The SNMP trap that is generated when an alarm
- entry crosses its falling threshold and generates
- an event that is configured for sending SNMP
- traps."
-
-
- ::= 2
-
- END
+RMON-MIB DEFINITIONS ::= BEGIN
+ IMPORTS
+ MODULE-IDENTITY, OBJECT-TYPE, OBJECT-IDENTITY,
+ NOTIFICATION-TYPE, mib-2, Counter32,
+ Integer32, TimeTicks FROM SNMPv2-SMI
+
+ TEXTUAL-CONVENTION, DisplayString FROM SNMPv2-TC
+
+ MODULE-COMPLIANCE, OBJECT-GROUP,
+ NOTIFICATION-GROUP FROM SNMPv2-CONF;
+
+
+-- Remote Network Monitoring MIB
+
+rmonMibModule MODULE-IDENTITY
+ LAST-UPDATED "200005110000Z" -- 11 May, 2000
+ ORGANIZATION "IETF RMON MIB Working Group"
+ CONTACT-INFO
+ "Steve Waldbusser
+ Phone: +1-650-948-6500
+ Fax: +1-650-745-0671
+ DESCRIPTION
+ "Remote network monitoring devices, often called
+ monitors or probes, are instruments that exist for
+ the purpose of managing a network. This MIB defines
+ objects for managing remote network monitoring devices."
+
+ REVISION "200005110000Z" -- 11 May, 2000
+ DESCRIPTION
+ "Reformatted into SMIv2 format.
+
+ This version published as RFC 2819."
+
+ REVISION "199502010000Z" -- 1 Feb, 1995
+ DESCRIPTION
+ "Bug fixes, clarifications and minor changes based on
+ implementation experience, published as RFC1757 [18].
+
+ Two changes were made to object definitions:
+
+ 1) A new status bit has been defined for the
+ captureBufferPacketStatus object, indicating that the
+ packet order within the capture buffer may not be identical to
+ the packet order as received off the wire. This bit may only
+ be used for packets transmitted by the probe. Older NMS
+ applications can safely ignore this status bit, which might be
+ used by newer agents.
+
+ 2) The packetMatch trap has been removed. This trap was never
+ actually 'approved' and was not added to this document along
+ with the risingAlarm and fallingAlarm traps. The packetMatch
+ trap could not be throttled, which could cause disruption of
+ normal network traffic under some circumstances. An NMS should
+ configure a risingAlarm threshold on the appropriate
+ channelMatches instance if a trap is desired for a packetMatch
+ event. Note that logging of packetMatch events is still
+ supported--only trap generation for such events has been
+ removed.
+
+ In addition, several clarifications to individual object
+ definitions have been added to assist agent and NMS
+ implementors:
+
+ - global definition of 'good packets' and 'bad packets'
+
+ - more detailed text governing conceptual row creation and
+ modification
+
+ - instructions for probes relating to interface changes and
+ disruptions
+
+ - clarification of some ethernet counter definitions
+
+ - recommended formula for calculating network utilization
+
+ - clarification of channel and captureBuffer behavior for some
+ unusual conditions
+
+ - examples of proper instance naming for each table"
+
+ REVISION "199111010000Z" -- 1 Nov, 1991
+ DESCRIPTION
+ "The original version of this MIB, published as RFC1271."
+ ::= { rmonConformance 8 }
+
+ rmon OBJECT IDENTIFIER ::= { mib-2 16 }
+
+
+ -- textual conventions
+
+OwnerString ::= TEXTUAL-CONVENTION
+ STATUS current
+
+ DESCRIPTION
+ "This data type is used to model an administratively
+ assigned name of the owner of a resource. Implementations
+ must accept values composed of well-formed NVT ASCII
+ sequences. In addition, implementations should accept
+ values composed of well-formed UTF-8 sequences.
+
+ It is suggested that this name contain one or more of
+ the following: IP address, management station name,
+ network manager's name, location, or phone number.
+ In some cases the agent itself will be the owner of
+ an entry. In these cases, this string shall be set
+ to a string starting with 'monitor'.
+
+ SNMP access control is articulated entirely in terms
+ of the contents of MIB views; access to a particular
+ SNMP object instance depends only upon its presence
+ or absence in a particular MIB view and never upon
+ its value or the value of related object instances.
+ Thus, objects of this type afford resolution of
+ resource contention only among cooperating
+ managers; they realize no access control function
+ with respect to uncooperative parties."
+ SYNTAX OCTET STRING (SIZE (0..127))
+
+EntryStatus ::= TEXTUAL-CONVENTION
+ STATUS current
+ DESCRIPTION
+ "The status of a table entry.
+
+ Setting this object to the value invalid(4) has the
+ effect of invalidating the corresponding entry.
+ That is, it effectively disassociates the mapping
+ identified with said entry.
+ It is an implementation-specific matter as to whether
+ the agent removes an invalidated entry from the table.
+ Accordingly, management stations must be prepared to
+ receive tabular information from agents that corresponds
+ to entries currently not in use. Proper
+ interpretation of such entries requires examination
+ of the relevant EntryStatus object.
+
+ An existing instance of this object cannot be set to
+ createRequest(2). This object may only be set to
+ createRequest(2) when this instance is created. When
+ this object is created, the agent may wish to create
+ supplemental object instances with default values
+ to complete a conceptual row in this table. Because the
+ creation of these default objects is entirely at the option
+ of the agent, the manager must not assume that any will be
+ created, but may make use of any that are created.
+ Immediately after completing the create operation, the agent
+ must set this object to underCreation(3).
+
+ When in the underCreation(3) state, an entry is allowed to
+ exist in a possibly incomplete, possibly inconsistent state,
+ usually to allow it to be modified in multiple PDUs. When in
+ this state, an entry is not fully active.
+ Entries shall exist in the underCreation(3) state until
+ the management station is finished configuring the entry
+ and sets this object to valid(1) or aborts, setting this
+ object to invalid(4). If the agent determines that an
+ entry has been in the underCreation(3) state for an
+ abnormally long time, it may decide that the management
+ station has crashed. If the agent makes this decision,
+ it may set this object to invalid(4) to reclaim the
+ entry. A prudent agent will understand that the
+ management station may need to wait for human input
+ and will allow for that possibility in its
+ determination of this abnormally long period.
+
+ An entry in the valid(1) state is fully configured and
+ consistent and fully represents the configuration or
+ operation such a row is intended to represent. For
+ example, it could be a statistical function that is
+ configured and active, or a filter that is available
+ in the list of filters processed by the packet capture
+ process.
+
+ A manager is restricted to changing the state of an entry in
+ the following ways:
+
+ To: valid createRequest underCreation invalid
+ From:
+ valid OK NO OK OK
+ createRequest N/A N/A N/A N/A
+ underCreation OK NO OK OK
+ invalid NO NO NO OK
+ nonExistent NO OK NO OK
+
+ In the table above, it is not applicable to move the state
+ from the createRequest state to any other state because the
+ manager will never find the variable in that state. The
+ nonExistent state is not a value of the enumeration, rather
+ it means that the entryStatus variable does not exist at all.
+
+ An agent may allow an entryStatus variable to change state in
+ additional ways, so long as the semantics of the states are
+ followed. This allowance is made to ease the implementation of
+ the agent and is made despite the fact that managers should
+ never exercise these additional state transitions."
+ SYNTAX INTEGER {
+ valid(1),
+ createRequest(2),
+ underCreation(3),
+ invalid(4)
+ }
+
+ statistics OBJECT IDENTIFIER ::= { rmon 1 }
+ history OBJECT IDENTIFIER ::= { rmon 2 }
+ alarm OBJECT IDENTIFIER ::= { rmon 3 }
+ hosts OBJECT IDENTIFIER ::= { rmon 4 }
+ hostTopN OBJECT IDENTIFIER ::= { rmon 5 }
+ matrix OBJECT IDENTIFIER ::= { rmon 6 }
+ filter OBJECT IDENTIFIER ::= { rmon 7 }
+ capture OBJECT IDENTIFIER ::= { rmon 8 }
+ event OBJECT IDENTIFIER ::= { rmon 9 }
+ rmonConformance OBJECT IDENTIFIER ::= { rmon 20 }
+
+-- The Ethernet Statistics Group
+--
+-- Implementation of the Ethernet Statistics group is optional.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The ethernet statistics group contains statistics measured by the
+-- probe for each monitored interface on this device. These
+-- statistics take the form of free running counters that start from
+-- zero when a valid entry is created.
+--
+-- This group currently has statistics defined only for
+-- Ethernet interfaces. Each etherStatsEntry contains statistics
+-- for one Ethernet interface. The probe must create one
+-- etherStats entry for each monitored Ethernet interface
+-- on the device.
+
+etherStatsTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF EtherStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of Ethernet statistics entries."
+ ::= { statistics 1 }
+
+etherStatsEntry OBJECT-TYPE
+ SYNTAX EtherStatsEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A collection of statistics kept for a particular
+ Ethernet interface. As an example, an instance of the
+ etherStatsPkts object might be named etherStatsPkts.1"
+ INDEX { etherStatsIndex }
+ ::= { etherStatsTable 1 }
+
+EtherStatsEntry ::= SEQUENCE {
+ etherStatsIndex Integer32,
+ etherStatsDataSource OBJECT IDENTIFIER,
+ etherStatsDropEvents Counter32,
+ etherStatsOctets Counter32,
+ etherStatsPkts Counter32,
+ etherStatsBroadcastPkts Counter32,
+ etherStatsMulticastPkts Counter32,
+ etherStatsCRCAlignErrors Counter32,
+ etherStatsUndersizePkts Counter32,
+ etherStatsOversizePkts Counter32,
+ etherStatsFragments Counter32,
+ etherStatsJabbers Counter32,
+ etherStatsCollisions Counter32,
+ etherStatsPkts64Octets Counter32,
+ etherStatsPkts65to127Octets Counter32,
+ etherStatsPkts128to255Octets Counter32,
+ etherStatsPkts256to511Octets Counter32,
+ etherStatsPkts512to1023Octets Counter32,
+ etherStatsPkts1024to1518Octets Counter32,
+ etherStatsOwner OwnerString,
+ etherStatsStatus EntryStatus
+}
+
+etherStatsIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of this object uniquely identifies this
+ etherStats entry."
+ ::= { etherStatsEntry 1 }
+
+etherStatsDataSource OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-create
+ STATUS current
+
+ DESCRIPTION
+ "This object identifies the source of the data that
+ this etherStats entry is configured to analyze. This
+ source can be any ethernet interface on this device.
+ In order to identify a particular interface, this object
+ shall identify the instance of the ifIndex object,
+ defined in RFC 2233 [17], for the desired interface.
+ For example, if an entry were to receive data from
+ interface #1, this object would be set to ifIndex.1.
+
+ The statistics in this group reflect all packets
+ on the local network segment attached to the identified
+ interface.
+
+ An agent may or may not be able to tell if fundamental
+ changes to the media of the interface have occurred and
+ necessitate an invalidation of this entry. For example, a
+ hot-pluggable ethernet card could be pulled out and replaced
+ by a token-ring card. In such a case, if the agent has such
+ knowledge of the change, it is recommended that it
+ invalidate this entry.
+
+ This object may not be modified if the associated
+ etherStatsStatus object is equal to valid(1)."
+ ::= { etherStatsEntry 2 }
+
+etherStatsDropEvents OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of events in which packets
+ were dropped by the probe due to lack of resources.
+ Note that this number is not necessarily the number of
+ packets dropped; it is just the number of times this
+ condition has been detected."
+ ::= { etherStatsEntry 3 }
+
+etherStatsOctets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of octets of data (including
+ those in bad packets) received on the
+ network (excluding framing bits but including
+ FCS octets).
+
+ This object can be used as a reasonable estimate of
+ 10-Megabit ethernet utilization. If greater precision is
+ desired, the etherStatsPkts and etherStatsOctets objects
+ should be sampled before and after a common interval. The
+ differences in the sampled values are Pkts and Octets,
+ respectively, and the number of seconds in the interval is
+ Interval. These values are used to calculate the Utilization
+ as follows:
+
+ Pkts * (9.6 + 6.4) + (Octets * .8)
+ Utilization = -------------------------------------
+ Interval * 10,000
+
+ The result of this equation is the value Utilization which
+ is the percent utilization of the ethernet segment on a
+ scale of 0 to 100 percent."
+ ::= { etherStatsEntry 4 }
+
+etherStatsPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets (including bad packets,
+ broadcast packets, and multicast packets) received."
+ ::= { etherStatsEntry 5 }
+
+etherStatsBroadcastPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of good packets received that were
+ directed to the broadcast address. Note that this
+ does not include multicast packets."
+ ::= { etherStatsEntry 6 }
+
+etherStatsMulticastPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of good packets received that were
+ directed to a multicast address. Note that this number
+ does not include packets directed to the broadcast
+ address."
+ ::= { etherStatsEntry 7 }
+
+etherStatsCRCAlignErrors OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets received that
+ had a length (excluding framing bits, but
+ including FCS octets) of between 64 and 1518
+ octets, inclusive, but had either a bad
+ Frame Check Sequence (FCS) with an integral
+ number of octets (FCS Error) or a bad FCS with
+ a non-integral number of octets (Alignment Error)."
+ ::= { etherStatsEntry 8 }
+
+etherStatsUndersizePkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets received that were
+ less than 64 octets long (excluding framing bits,
+ but including FCS octets) and were otherwise well
+ formed."
+ ::= { etherStatsEntry 9 }
+
+etherStatsOversizePkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets received that were
+ longer than 1518 octets (excluding framing bits,
+ but including FCS octets) and were otherwise
+ well formed."
+ ::= { etherStatsEntry 10 }
+
+etherStatsFragments OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets received that were less than
+ 64 octets in length (excluding framing bits but including
+ FCS octets) and had either a bad Frame Check Sequence
+ (FCS) with an integral number of octets (FCS Error) or a
+ bad FCS with a non-integral number of octets (Alignment
+ Error).
+
+ Note that it is entirely normal for etherStatsFragments to
+ increment. This is because it counts both runts (which are
+ normal occurrences due to collisions) and noise hits."
+ ::= { etherStatsEntry 11 }
+
+etherStatsJabbers OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets received that were
+ longer than 1518 octets (excluding framing bits,
+ but including FCS octets), and had either a bad
+ Frame Check Sequence (FCS) with an integral number
+ of octets (FCS Error) or a bad FCS with a non-integral
+ number of octets (Alignment Error).
+
+ Note that this definition of jabber is different
+ than the definition in IEEE-802.3 section 8.2.1.5
+ (10BASE5) and section 10.3.1.4 (10BASE2). These
+ documents define jabber as the condition where any
+ packet exceeds 20 ms. The allowed range to detect
+ jabber is between 20 ms and 150 ms."
+ ::= { etherStatsEntry 12 }
+
+etherStatsCollisions OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Collisions"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The best estimate of the total number of collisions
+ on this Ethernet segment.
+
+ The value returned will depend on the location of the
+ RMON probe. Section 8.2.1.3 (10BASE-5) and section
+ 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a
+ station must detect a collision, in the receive mode, if
+ three or more stations are transmitting simultaneously. A
+ repeater port must detect a collision when two or more
+ stations are transmitting simultaneously. Thus a probe
+ placed on a repeater port could record more collisions
+ than a probe connected to a station on the same segment
+ would.
+
+ Probe location plays a much smaller role when considering
+ 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3
+ defines a collision as the simultaneous presence of signals
+ on the DO and RD circuits (transmitting and receiving
+ at the same time). A 10BASE-T station can only detect
+ collisions when it is transmitting. Thus probes placed on
+ a station and a repeater, should report the same number of
+ collisions.
+
+ Note also that an RMON probe inside a repeater should
+ ideally report collisions between the repeater and one or
+ more other hosts (transmit collisions as defined by IEEE
+ 802.3k) plus receiver collisions observed on any coax
+ segments to which the repeater is connected."
+ ::= { etherStatsEntry 13 }
+
+etherStatsPkts64Octets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets (including bad
+ packets) received that were 64 octets in length
+ (excluding framing bits but including FCS octets)."
+ ::= { etherStatsEntry 14 }
+
+etherStatsPkts65to127Octets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets (including bad
+ packets) received that were between
+ 65 and 127 octets in length inclusive
+ (excluding framing bits but including FCS octets)."
+ ::= { etherStatsEntry 15 }
+
+etherStatsPkts128to255Octets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+
+ STATUS current
+ DESCRIPTION
+ "The total number of packets (including bad
+ packets) received that were between
+ 128 and 255 octets in length inclusive
+ (excluding framing bits but including FCS octets)."
+ ::= { etherStatsEntry 16 }
+
+etherStatsPkts256to511Octets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets (including bad
+ packets) received that were between
+ 256 and 511 octets in length inclusive
+ (excluding framing bits but including FCS octets)."
+ ::= { etherStatsEntry 17 }
+
+etherStatsPkts512to1023Octets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets (including bad
+ packets) received that were between
+ 512 and 1023 octets in length inclusive
+ (excluding framing bits but including FCS octets)."
+ ::= { etherStatsEntry 18 }
+
+etherStatsPkts1024to1518Octets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets (including bad
+ packets) received that were between
+ 1024 and 1518 octets in length inclusive
+ (excluding framing bits but including FCS octets)."
+ ::= { etherStatsEntry 19 }
+
+etherStatsOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+
+ DESCRIPTION
+ "The entity that configured this entry and is therefore
+ using the resources assigned to it."
+ ::= { etherStatsEntry 20 }
+
+etherStatsStatus OBJECT-TYPE
+ SYNTAX EntryStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this etherStats entry."
+ ::= { etherStatsEntry 21 }
+
+-- The History Control Group
+
+-- Implementation of the History Control group is optional.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The history control group controls the periodic statistical
+-- sampling of data from various types of networks. The
+-- historyControlTable stores configuration entries that each
+-- define an interface, polling period, and other parameters.
+-- Once samples are taken, their data is stored in an entry
+-- in a media-specific table. Each such entry defines one
+-- sample, and is associated with the historyControlEntry that
+-- caused the sample to be taken. Each counter in the
+-- etherHistoryEntry counts the same event as its similarly-named
+-- counterpart in the etherStatsEntry, except that each value here
+-- is a cumulative sum during a sampling period.
+--
+-- If the probe keeps track of the time of day, it should start
+-- the first sample of the history at a time such that
+-- when the next hour of the day begins, a sample is
+-- started at that instant. This tends to make more
+-- user-friendly reports, and enables comparison of reports
+-- from different probes that have relatively accurate time
+-- of day.
+--
+-- The probe is encouraged to add two history control entries
+-- per monitored interface upon initialization that describe a short
+-- term and a long term polling period. Suggested parameters are 30
+-- seconds for the short term polling period and 30 minutes for
+-- the long term period.
+
+historyControlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HistoryControlEntry
+ MAX-ACCESS not-accessible
+
+ STATUS current
+ DESCRIPTION
+ "A list of history control entries."
+ ::= { history 1 }
+
+historyControlEntry OBJECT-TYPE
+ SYNTAX HistoryControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of parameters that set up a periodic sampling of
+ statistics. As an example, an instance of the
+ historyControlInterval object might be named
+ historyControlInterval.2"
+ INDEX { historyControlIndex }
+ ::= { historyControlTable 1 }
+
+HistoryControlEntry ::= SEQUENCE {
+ historyControlIndex Integer32,
+ historyControlDataSource OBJECT IDENTIFIER,
+ historyControlBucketsRequested Integer32,
+ historyControlBucketsGranted Integer32,
+ historyControlInterval Integer32,
+ historyControlOwner OwnerString,
+ historyControlStatus EntryStatus
+}
+
+historyControlIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry in the
+ historyControl table. Each such entry defines a
+ set of samples at a particular interval for an
+ interface on the device."
+ ::= { historyControlEntry 1 }
+
+historyControlDataSource OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object identifies the source of the data for
+ which historical data was collected and
+ placed in a media-specific table on behalf of this
+ historyControlEntry. This source can be any
+ interface on this device. In order to identify
+ a particular interface, this object shall identify
+ the instance of the ifIndex object, defined
+ in RFC 2233 [17], for the desired interface.
+ For example, if an entry were to receive data from
+ interface #1, this object would be set to ifIndex.1.
+
+ The statistics in this group reflect all packets
+ on the local network segment attached to the identified
+ interface.
+
+ An agent may or may not be able to tell if fundamental
+ changes to the media of the interface have occurred and
+ necessitate an invalidation of this entry. For example, a
+ hot-pluggable ethernet card could be pulled out and replaced
+ by a token-ring card. In such a case, if the agent has such
+ knowledge of the change, it is recommended that it
+ invalidate this entry.
+
+ This object may not be modified if the associated
+ historyControlStatus object is equal to valid(1)."
+ ::= { historyControlEntry 2 }
+
+historyControlBucketsRequested OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The requested number of discrete time intervals
+ over which data is to be saved in the part of the
+ media-specific table associated with this
+ historyControlEntry.
+
+ When this object is created or modified, the probe
+ should set historyControlBucketsGranted as closely to
+ this object as is possible for the particular probe
+ implementation and available resources."
+ DEFVAL { 50 }
+ ::= { historyControlEntry 3 }
+
+historyControlBucketsGranted OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of discrete sampling intervals
+ over which data shall be saved in the part of
+ the media-specific table associated with this
+ historyControlEntry.
+
+ When the associated historyControlBucketsRequested
+ object is created or modified, the probe
+ should set this object as closely to the requested
+ value as is possible for the particular
+ probe implementation and available resources. The
+ probe must not lower this value except as a result
+ of a modification to the associated
+ historyControlBucketsRequested object.
+
+ There will be times when the actual number of
+ buckets associated with this entry is less than
+ the value of this object. In this case, at the
+ end of each sampling interval, a new bucket will
+ be added to the media-specific table.
+
+ When the number of buckets reaches the value of
+ this object and a new bucket is to be added to the
+ media-specific table, the oldest bucket associated
+ with this historyControlEntry shall be deleted by
+ the agent so that the new bucket can be added.
+
+ When the value of this object changes to a value less
+ than the current value, entries are deleted
+ from the media-specific table associated with this
+ historyControlEntry. Enough of the oldest of these
+ entries shall be deleted by the agent so that their
+ number remains less than or equal to the new value of
+ this object.
+
+ When the value of this object changes to a value greater
+ than the current value, the number of associated media-
+ specific entries may be allowed to grow."
+ ::= { historyControlEntry 4 }
+
+historyControlInterval OBJECT-TYPE
+ SYNTAX Integer32 (1..3600)
+ UNITS "Seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The interval in seconds over which the data is
+ sampled for each bucket in the part of the
+ media-specific table associated with this
+ historyControlEntry. This interval can
+ be set to any number of seconds between 1 and
+ 3600 (1 hour).
+
+ Because the counters in a bucket may overflow at their
+ maximum value with no indication, a prudent manager will
+ take into account the possibility of overflow in any of
+ the associated counters. It is important to consider the
+ minimum time in which any counter could overflow on a
+ particular media type and set the historyControlInterval
+ object to a value less than this interval. This is
+ typically most important for the 'octets' counter in any
+ media-specific table. For example, on an Ethernet
+ network, the etherHistoryOctets counter could overflow
+ in about one hour at the Ethernet's maximum
+ utilization.
+
+ This object may not be modified if the associated
+ historyControlStatus object is equal to valid(1)."
+ DEFVAL { 1800 }
+ ::= { historyControlEntry 5 }
+
+historyControlOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The entity that configured this entry and is therefore
+ using the resources assigned to it."
+ ::= { historyControlEntry 6 }
+
+historyControlStatus OBJECT-TYPE
+ SYNTAX EntryStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this historyControl entry.
+
+ Each instance of the media-specific table associated
+ with this historyControlEntry will be deleted by the agent
+ if this historyControlEntry is not equal to valid(1)."
+ ::= { historyControlEntry 7 }
+
+-- The Ethernet History Group
+
+-- Implementation of the Ethernet History group is optional.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The Ethernet History group records periodic statistical samples
+-- from a network and stores them for later retrieval.
+-- Once samples are taken, their data is stored in an entry
+-- in a media-specific table. Each such entry defines one
+-- sample, and is associated with the historyControlEntry that
+-- caused the sample to be taken. This group defines the
+-- etherHistoryTable, for Ethernet networks.
+--
+
+etherHistoryTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF EtherHistoryEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of Ethernet history entries."
+ ::= { history 2 }
+
+etherHistoryEntry OBJECT-TYPE
+ SYNTAX EtherHistoryEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "An historical sample of Ethernet statistics on a particular
+ Ethernet interface. This sample is associated with the
+ historyControlEntry which set up the parameters for
+ a regular collection of these samples. As an example, an
+ instance of the etherHistoryPkts object might be named
+ etherHistoryPkts.2.89"
+ INDEX { etherHistoryIndex , etherHistorySampleIndex }
+ ::= { etherHistoryTable 1 }
+
+EtherHistoryEntry ::= SEQUENCE {
+ etherHistoryIndex Integer32,
+ etherHistorySampleIndex Integer32,
+ etherHistoryIntervalStart TimeTicks,
+ etherHistoryDropEvents Counter32,
+ etherHistoryOctets Counter32,
+ etherHistoryPkts Counter32,
+ etherHistoryBroadcastPkts Counter32,
+ etherHistoryMulticastPkts Counter32,
+ etherHistoryCRCAlignErrors Counter32,
+ etherHistoryUndersizePkts Counter32,
+ etherHistoryOversizePkts Counter32,
+ etherHistoryFragments Counter32,
+ etherHistoryJabbers Counter32,
+ etherHistoryCollisions Counter32,
+ etherHistoryUtilization Integer32
+}
+
+etherHistoryIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The history of which this entry is a part. The
+ history identified by a particular value of this
+ index is the same history as identified
+ by the same value of historyControlIndex."
+ ::= { etherHistoryEntry 1 }
+
+etherHistorySampleIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies the particular
+ sample this entry represents among all samples
+ associated with the same historyControlEntry.
+ This index starts at 1 and increases by one
+ as each new sample is taken."
+ ::= { etherHistoryEntry 2 }
+
+etherHistoryIntervalStart OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime at the start of the interval
+ over which this sample was measured. If the probe
+ keeps track of the time of day, it should start
+ the first sample of the history at a time such that
+ when the next hour of the day begins, a sample is
+ started at that instant. Note that following this
+ rule may require the probe to delay collecting the
+ first sample of the history, as each sample must be
+ of the same interval. Also note that the sample which
+ is currently being collected is not accessible in this
+ table until the end of its interval."
+ ::= { etherHistoryEntry 3 }
+
+etherHistoryDropEvents OBJECT-TYPE
+ SYNTAX Counter32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of events in which packets
+ were dropped by the probe due to lack of resources
+ during this sampling interval. Note that this number
+ is not necessarily the number of packets dropped, it
+ is just the number of times this condition has been
+ detected."
+ ::= { etherHistoryEntry 4 }
+
+etherHistoryOctets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of octets of data (including
+ those in bad packets) received on the
+ network (excluding framing bits but including
+ FCS octets)."
+ ::= { etherHistoryEntry 5 }
+
+etherHistoryPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets (including bad packets)
+ received during this sampling interval."
+ ::= { etherHistoryEntry 6 }
+
+etherHistoryBroadcastPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of good packets received during this
+ sampling interval that were directed to the
+ broadcast address."
+ ::= { etherHistoryEntry 7 }
+
+etherHistoryMulticastPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of good packets received during this
+ sampling interval that were directed to a
+ multicast address. Note that this number does not
+ include packets addressed to the broadcast address."
+ ::= { etherHistoryEntry 8 }
+
+etherHistoryCRCAlignErrors OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets received during this
+ sampling interval that had a length (excluding
+ framing bits but including FCS octets) between
+ 64 and 1518 octets, inclusive, but had either a bad Frame
+ Check Sequence (FCS) with an integral number of octets
+ (FCS Error) or a bad FCS with a non-integral number
+ of octets (Alignment Error)."
+ ::= { etherHistoryEntry 9 }
+
+etherHistoryUndersizePkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets received during this
+ sampling interval that were less than 64 octets
+ long (excluding framing bits but including FCS
+ octets) and were otherwise well formed."
+ ::= { etherHistoryEntry 10 }
+
+etherHistoryOversizePkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets received during this
+ sampling interval that were longer than 1518
+ octets (excluding framing bits but including
+ FCS octets) but were otherwise well formed."
+ ::= { etherHistoryEntry 11 }
+
+etherHistoryFragments OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The total number of packets received during this
+ sampling interval that were less than 64 octets in
+ length (excluding framing bits but including FCS
+ octets) had either a bad Frame Check Sequence (FCS)
+ with an integral number of octets (FCS Error) or a bad
+ FCS with a non-integral number of octets (Alignment
+ Error).
+
+ Note that it is entirely normal for etherHistoryFragments to
+ increment. This is because it counts both runts (which are
+ normal occurrences due to collisions) and noise hits."
+ ::= { etherHistoryEntry 12 }
+
+etherHistoryJabbers OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets received during this
+ sampling interval that were longer than 1518 octets
+ (excluding framing bits but including FCS octets),
+ and had either a bad Frame Check Sequence (FCS)
+ with an integral number of octets (FCS Error) or
+ a bad FCS with a non-integral number of octets
+ (Alignment Error).
+
+ Note that this definition of jabber is different
+ than the definition in IEEE-802.3 section 8.2.1.5
+ (10BASE5) and section 10.3.1.4 (10BASE2). These
+ documents define jabber as the condition where any
+ packet exceeds 20 ms. The allowed range to detect
+ jabber is between 20 ms and 150 ms."
+ ::= { etherHistoryEntry 13 }
+
+etherHistoryCollisions OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Collisions"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The best estimate of the total number of collisions
+ on this Ethernet segment during this sampling
+ interval.
+
+ The value returned will depend on the location of the
+ RMON probe. Section 8.2.1.3 (10BASE-5) and section
+ 10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a
+ station must detect a collision, in the receive mode, if
+ three or more stations are transmitting simultaneously. A
+ repeater port must detect a collision when two or more
+ stations are transmitting simultaneously. Thus a probe
+ placed on a repeater port could record more collisions
+ than a probe connected to a station on the same segment
+ would.
+
+ Probe location plays a much smaller role when considering
+ 10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3
+ defines a collision as the simultaneous presence of signals
+ on the DO and RD circuits (transmitting and receiving
+ at the same time). A 10BASE-T station can only detect
+ collisions when it is transmitting. Thus probes placed on
+ a station and a repeater, should report the same number of
+ collisions.
+
+ Note also that an RMON probe inside a repeater should
+ ideally report collisions between the repeater and one or
+ more other hosts (transmit collisions as defined by IEEE
+ 802.3k) plus receiver collisions observed on any coax
+ segments to which the repeater is connected."
+ ::= { etherHistoryEntry 14 }
+
+etherHistoryUtilization OBJECT-TYPE
+ SYNTAX Integer32 (0..10000)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The best estimate of the mean physical layer
+ network utilization on this interface during this
+ sampling interval, in hundredths of a percent."
+ ::= { etherHistoryEntry 15 }
+
+-- The Alarm Group
+
+-- Implementation of the Alarm group is optional. The Alarm Group
+-- requires the implementation of the Event group.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The Alarm group periodically takes statistical samples from
+-- variables in the probe and compares them to thresholds that have
+-- been configured. The alarm table stores configuration
+-- entries that each define a variable, polling period, and
+-- threshold parameters. If a sample is found to cross the
+-- threshold values, an event is generated. Only variables that
+-- resolve to an ASN.1 primitive type of INTEGER (INTEGER, Integer32,
+-- Counter32, Counter64, Gauge32, or TimeTicks) may be monitored in
+-- this way.
+--
+-- This function has a hysteresis mechanism to limit the generation
+-- of events. This mechanism generates one event as a threshold
+-- is crossed in the appropriate direction. No more events are
+-- generated for that threshold until the opposite threshold is
+-- crossed.
+--
+-- In the case of a sampling a deltaValue, a probe may implement
+-- this mechanism with more precision if it takes a delta sample
+-- twice per period, each time comparing the sum of the latest two
+-- samples to the threshold. This allows the detection of threshold
+-- crossings that span the sampling boundary. Note that this does
+-- not require any special configuration of the threshold value.
+-- It is suggested that probes implement this more precise algorithm.
+
+alarmTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF AlarmEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of alarm entries."
+ ::= { alarm 1 }
+
+alarmEntry OBJECT-TYPE
+ SYNTAX AlarmEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of parameters that set up a periodic checking
+ for alarm conditions. For example, an instance of the
+ alarmValue object might be named alarmValue.8"
+ INDEX { alarmIndex }
+ ::= { alarmTable 1 }
+
+AlarmEntry ::= SEQUENCE {
+ alarmIndex Integer32,
+ alarmInterval Integer32,
+ alarmVariable OBJECT IDENTIFIER,
+ alarmSampleType INTEGER,
+ alarmValue Integer32,
+ alarmStartupAlarm INTEGER,
+ alarmRisingThreshold Integer32,
+ alarmFallingThreshold Integer32,
+ alarmRisingEventIndex Integer32,
+ alarmFallingEventIndex Integer32,
+ alarmOwner OwnerString,
+ alarmStatus EntryStatus
+}
+
+alarmIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry in the
+ alarm table. Each such entry defines a
+ diagnostic sample at a particular interval
+ for an object on the device."
+ ::= { alarmEntry 1 }
+
+alarmInterval OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The interval in seconds over which the data is
+ sampled and compared with the rising and falling
+ thresholds. When setting this variable, care
+ should be taken in the case of deltaValue
+ sampling - the interval should be set short enough
+ that the sampled variable is very unlikely to
+ increase or decrease by more than 2^31 - 1 during
+ a single sampling interval.
+
+ This object may not be modified if the associated
+ alarmStatus object is equal to valid(1)."
+ ::= { alarmEntry 2 }
+
+alarmVariable OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The object identifier of the particular variable to be
+ sampled. Only variables that resolve to an ASN.1 primitive
+ type of INTEGER (INTEGER, Integer32, Counter32, Counter64,
+ Gauge, or TimeTicks) may be sampled.
+
+ Because SNMP access control is articulated entirely
+ in terms of the contents of MIB views, no access
+ control mechanism exists that can restrict the value of
+ this object to identify only those objects that exist
+ in a particular MIB view. Because there is thus no
+ acceptable means of restricting the read access that
+ could be obtained through the alarm mechanism, the
+ probe must only grant write access to this object in
+ those views that have read access to all objects on
+ the probe.
+
+ During a set operation, if the supplied variable name is
+ not available in the selected MIB view, a badValue error
+ must be returned. If at any time the variable name of
+ an established alarmEntry is no longer available in the
+ selected MIB view, the probe must change the status of
+ this alarmEntry to invalid(4).
+
+ This object may not be modified if the associated
+ alarmStatus object is equal to valid(1)."
+ ::= { alarmEntry 3 }
+
+alarmSampleType OBJECT-TYPE
+ SYNTAX INTEGER {
+ absoluteValue(1),
+ deltaValue(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The method of sampling the selected variable and
+ calculating the value to be compared against the
+ thresholds. If the value of this object is
+ absoluteValue(1), the value of the selected variable
+ will be compared directly with the thresholds at the
+ end of the sampling interval. If the value of this
+ object is deltaValue(2), the value of the selected
+ variable at the last sample will be subtracted from
+ the current value, and the difference compared with
+ the thresholds.
+
+ This object may not be modified if the associated
+ alarmStatus object is equal to valid(1)."
+ ::= { alarmEntry 4 }
+
+alarmValue OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of the statistic during the last sampling
+ period. For example, if the sample type is deltaValue,
+ this value will be the difference between the samples
+ at the beginning and end of the period. If the sample
+ type is absoluteValue, this value will be the sampled
+ value at the end of the period.
+ This is the value that is compared with the rising and
+ falling thresholds.
+
+ The value during the current sampling period is not
+ made available until the period is completed and will
+ remain available until the next period completes."
+ ::= { alarmEntry 5 }
+
+alarmStartupAlarm OBJECT-TYPE
+ SYNTAX INTEGER {
+ risingAlarm(1),
+ fallingAlarm(2),
+ risingOrFallingAlarm(3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The alarm that may be sent when this entry is first
+ set to valid. If the first sample after this entry
+ becomes valid is greater than or equal to the
+ risingThreshold and alarmStartupAlarm is equal to
+ risingAlarm(1) or risingOrFallingAlarm(3), then a single
+ rising alarm will be generated. If the first sample
+ after this entry becomes valid is less than or equal
+ to the fallingThreshold and alarmStartupAlarm is equal
+ to fallingAlarm(2) or risingOrFallingAlarm(3), then a
+ single falling alarm will be generated.
+
+ This object may not be modified if the associated
+ alarmStatus object is equal to valid(1)."
+ ::= { alarmEntry 6 }
+
+alarmRisingThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A threshold for the sampled statistic. When the current
+ sampled value is greater than or equal to this threshold,
+ and the value at the last sampling interval was less than
+ this threshold, a single event will be generated.
+ A single event will also be generated if the first
+ sample after this entry becomes valid is greater than or
+ equal to this threshold and the associated
+ alarmStartupAlarm is equal to risingAlarm(1) or
+ risingOrFallingAlarm(3).
+
+ After a rising event is generated, another such event
+ will not be generated until the sampled value
+ falls below this threshold and reaches the
+ alarmFallingThreshold.
+
+ This object may not be modified if the associated
+ alarmStatus object is equal to valid(1)."
+ ::= { alarmEntry 7 }
+
+alarmFallingThreshold OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A threshold for the sampled statistic. When the current
+ sampled value is less than or equal to this threshold,
+ and the value at the last sampling interval was greater than
+ this threshold, a single event will be generated.
+ A single event will also be generated if the first
+ sample after this entry becomes valid is less than or
+ equal to this threshold and the associated
+ alarmStartupAlarm is equal to fallingAlarm(2) or
+ risingOrFallingAlarm(3).
+
+ After a falling event is generated, another such event
+ will not be generated until the sampled value
+ rises above this threshold and reaches the
+ alarmRisingThreshold.
+
+ This object may not be modified if the associated
+ alarmStatus object is equal to valid(1)."
+ ::= { alarmEntry 8 }
+
+alarmRisingEventIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The index of the eventEntry that is
+ used when a rising threshold is crossed. The
+ eventEntry identified by a particular value of
+ this index is the same as identified by the same value
+ of the eventIndex object. If there is no
+ corresponding entry in the eventTable, then
+ no association exists. In particular, if this value
+ is zero, no associated event will be generated, as
+ zero is not a valid event index.
+
+ This object may not be modified if the associated
+ alarmStatus object is equal to valid(1)."
+ ::= { alarmEntry 9 }
+
+alarmFallingEventIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The index of the eventEntry that is
+ used when a falling threshold is crossed. The
+ eventEntry identified by a particular value of
+ this index is the same as identified by the same value
+ of the eventIndex object. If there is no
+ corresponding entry in the eventTable, then
+ no association exists. In particular, if this value
+ is zero, no associated event will be generated, as
+ zero is not a valid event index.
+
+ This object may not be modified if the associated
+ alarmStatus object is equal to valid(1)."
+ ::= { alarmEntry 10 }
+
+alarmOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The entity that configured this entry and is therefore
+ using the resources assigned to it."
+ ::= { alarmEntry 11 }
+
+alarmStatus OBJECT-TYPE
+ SYNTAX EntryStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this alarm entry."
+ ::= { alarmEntry 12 }
+
+-- The Host Group
+
+-- Implementation of the Host group is optional.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The host group discovers new hosts on the network by
+-- keeping a list of source and destination MAC Addresses seen
+-- in good packets. For each of these addresses, the host group
+-- keeps a set of statistics. The hostControlTable controls
+-- which interfaces this function is performed on, and contains
+-- some information about the process. On behalf of each
+-- hostControlEntry, data is collected on an interface and placed
+-- in both the hostTable and the hostTimeTable. If the
+-- monitoring device finds itself short of resources, it may
+-- delete entries as needed. It is suggested that the device
+-- delete the least recently used entries first.
+
+-- The hostTable contains entries for each address discovered on
+-- a particular interface. Each entry contains statistical
+-- data about that host. This table is indexed by the
+-- MAC address of the host, through which a random access
+-- may be achieved.
+
+-- The hostTimeTable contains data in the same format as the
+-- hostTable, and must contain the same set of hosts, but is
+-- indexed using hostTimeCreationOrder rather than hostAddress.
+-- The hostTimeCreationOrder is an integer which reflects
+-- the relative order in which a particular entry was discovered
+-- and thus inserted into the table. As this order, and thus
+-- the index, is among those entries currently in the table,
+-- the index for a particular entry may change if an
+-- (earlier) entry is deleted. Thus the association between
+-- hostTimeCreationOrder and hostTimeEntry may be broken at
+-- any time.
+
+-- The hostTimeTable has two important uses. The first is the
+-- fast download of this potentially large table. Because the
+-- index of this table runs from 1 to the size of the table,
+-- inclusive, its values are predictable. This allows very
+-- efficient packing of variables into SNMP PDU's and allows
+-- a table transfer to have multiple packets outstanding.
+-- These benefits increase transfer rates tremendously.
+
+-- The second use of the hostTimeTable is the efficient discovery
+-- by the management station of new entries added to the table.
+-- After the management station has downloaded the entire table,
+-- it knows that new entries will be added immediately after the
+-- end of the current table. It can thus detect new entries there
+-- and retrieve them easily.
+
+-- Because the association between hostTimeCreationOrder and
+-- hostTimeEntry may be broken at any time, the management
+-- station must monitor the related hostControlLastDeleteTime
+-- object. When the management station thus detects a deletion,
+-- it must assume that any such associations have been broken,
+-- and invalidate any it has stored locally. This includes
+-- restarting any download of the hostTimeTable that may have been
+-- in progress, as well as rediscovering the end of the
+-- hostTimeTable so that it may detect new entries. If the
+-- management station does not detect the broken association,
+-- it may continue to refer to a particular host by its
+-- creationOrder while unwittingly retrieving the data associated
+-- with another host entirely. If this happens while downloading
+-- the host table, the management station may fail to download
+-- all of the entries in the table.
+
+
+hostControlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HostControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of host table control entries."
+ ::= { hosts 1 }
+
+hostControlEntry OBJECT-TYPE
+ SYNTAX HostControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of parameters that set up the discovery of hosts
+ on a particular interface and the collection of statistics
+ about these hosts. For example, an instance of the
+ hostControlTableSize object might be named
+ hostControlTableSize.1"
+ INDEX { hostControlIndex }
+ ::= { hostControlTable 1 }
+
+HostControlEntry ::= SEQUENCE {
+
+ hostControlIndex Integer32,
+ hostControlDataSource OBJECT IDENTIFIER,
+ hostControlTableSize Integer32,
+ hostControlLastDeleteTime TimeTicks,
+ hostControlOwner OwnerString,
+ hostControlStatus EntryStatus
+}
+
+hostControlIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry in the
+ hostControl table. Each such entry defines
+ a function that discovers hosts on a particular interface
+ and places statistics about them in the hostTable and
+ the hostTimeTable on behalf of this hostControlEntry."
+ ::= { hostControlEntry 1 }
+
+hostControlDataSource OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object identifies the source of the data for
+ this instance of the host function. This source
+ can be any interface on this device. In order
+ to identify a particular interface, this object shall
+ identify the instance of the ifIndex object, defined
+ in RFC 2233 [17], for the desired interface.
+ For example, if an entry were to receive data from
+ interface #1, this object would be set to ifIndex.1.
+
+ The statistics in this group reflect all packets
+ on the local network segment attached to the identified
+ interface.
+
+ An agent may or may not be able to tell if fundamental
+ changes to the media of the interface have occurred and
+ necessitate an invalidation of this entry. For example, a
+ hot-pluggable ethernet card could be pulled out and replaced
+ by a token-ring card. In such a case, if the agent has such
+ knowledge of the change, it is recommended that it
+ invalidate this entry.
+
+ This object may not be modified if the associated
+ hostControlStatus object is equal to valid(1)."
+ ::= { hostControlEntry 2 }
+
+hostControlTableSize OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of hostEntries in the hostTable and the
+ hostTimeTable associated with this hostControlEntry."
+ ::= { hostControlEntry 3 }
+
+hostControlLastDeleteTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when the last entry
+ was deleted from the portion of the hostTable
+ associated with this hostControlEntry. If no
+ deletions have occurred, this value shall be zero."
+ ::= { hostControlEntry 4 }
+
+hostControlOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The entity that configured this entry and is therefore
+ using the resources assigned to it."
+ ::= { hostControlEntry 5 }
+
+hostControlStatus OBJECT-TYPE
+ SYNTAX EntryStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this hostControl entry.
+
+ If this object is not equal to valid(1), all associated
+ entries in the hostTable, hostTimeTable, and the
+ hostTopNTable shall be deleted by the agent."
+ ::= { hostControlEntry 6 }
+
+hostTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HostEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of host entries."
+ ::= { hosts 2 }
+
+hostEntry OBJECT-TYPE
+ SYNTAX HostEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A collection of statistics for a particular host that has
+ been discovered on an interface of this device. For example,
+ an instance of the hostOutBroadcastPkts object might be
+ named hostOutBroadcastPkts.1.6.8.0.32.27.3.176"
+ INDEX { hostIndex, hostAddress }
+ ::= { hostTable 1 }
+
+HostEntry ::= SEQUENCE {
+ hostAddress OCTET STRING,
+ hostCreationOrder Integer32,
+ hostIndex Integer32,
+ hostInPkts Counter32,
+ hostOutPkts Counter32,
+ hostInOctets Counter32,
+ hostOutOctets Counter32,
+ hostOutErrors Counter32,
+ hostOutBroadcastPkts Counter32,
+ hostOutMulticastPkts Counter32
+}
+
+hostAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The physical address of this host."
+ ::= { hostEntry 1 }
+
+hostCreationOrder OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that defines the relative ordering of
+ the creation time of hosts captured for a
+ particular hostControlEntry. This index shall
+ be between 1 and N, where N is the value of
+ the associated hostControlTableSize. The ordering
+ of the indexes is based on the order of each entry's
+ insertion into the table, in which entries added earlier
+ have a lower index value than entries added later.
+
+ It is important to note that the order for a
+ particular entry may change as an (earlier) entry
+ is deleted from the table. Because this order may
+ change, management stations should make use of the
+ hostControlLastDeleteTime variable in the
+ hostControlEntry associated with the relevant
+ portion of the hostTable. By observing
+ this variable, the management station may detect
+ the circumstances where a previous association
+ between a value of hostCreationOrder
+ and a hostEntry may no longer hold."
+ ::= { hostEntry 2 }
+
+hostIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The set of collected host statistics of which
+ this entry is a part. The set of hosts
+ identified by a particular value of this
+ index is associated with the hostControlEntry
+ as identified by the same value of hostControlIndex."
+ ::= { hostEntry 3 }
+
+hostInPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of good packets transmitted to this
+ address since it was added to the hostTable."
+ ::= { hostEntry 4 }
+
+hostOutPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets, including bad packets, transmitted
+ by this address since it was added to the hostTable."
+ ::= { hostEntry 5 }
+
+hostInOctets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of octets transmitted to this address since
+ it was added to the hostTable (excluding framing
+ bits but including FCS octets), except for those
+ octets in bad packets."
+ ::= { hostEntry 6 }
+
+hostOutOctets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of octets transmitted by this address since
+ it was added to the hostTable (excluding framing
+ bits but including FCS octets), including those
+ octets in bad packets."
+ ::= { hostEntry 7 }
+
+hostOutErrors OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of bad packets transmitted by this address
+ since this host was added to the hostTable."
+ ::= { hostEntry 8 }
+
+hostOutBroadcastPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of good packets transmitted by this
+ address that were directed to the broadcast address
+ since this host was added to the hostTable."
+ ::= { hostEntry 9 }
+
+hostOutMulticastPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of good packets transmitted by this
+ address that were directed to a multicast address
+ since this host was added to the hostTable.
+ Note that this number does not include packets
+ directed to the broadcast address."
+ ::= { hostEntry 10 }
+
+-- host Time Table
+
+hostTimeTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HostTimeEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of time-ordered host table entries."
+ ::= { hosts 3 }
+
+hostTimeEntry OBJECT-TYPE
+ SYNTAX HostTimeEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A collection of statistics for a particular host that has
+ been discovered on an interface of this device. This
+ collection includes the relative ordering of the creation
+ time of this object. For example, an instance of the
+ hostTimeOutBroadcastPkts object might be named
+ hostTimeOutBroadcastPkts.1.687"
+ INDEX { hostTimeIndex, hostTimeCreationOrder }
+ ::= { hostTimeTable 1 }
+
+HostTimeEntry ::= SEQUENCE {
+ hostTimeAddress OCTET STRING,
+ hostTimeCreationOrder Integer32,
+ hostTimeIndex Integer32,
+ hostTimeInPkts Counter32,
+ hostTimeOutPkts Counter32,
+ hostTimeInOctets Counter32,
+ hostTimeOutOctets Counter32,
+ hostTimeOutErrors Counter32,
+ hostTimeOutBroadcastPkts Counter32,
+ hostTimeOutMulticastPkts Counter32
+}
+
+hostTimeAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The physical address of this host."
+ ::= { hostTimeEntry 1 }
+
+hostTimeCreationOrder OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry in
+ the hostTime table among those entries associated
+ with the same hostControlEntry. This index shall
+ be between 1 and N, where N is the value of
+ the associated hostControlTableSize. The ordering
+ of the indexes is based on the order of each entry's
+ insertion into the table, in which entries added earlier
+ have a lower index value than entries added later.
+ Thus the management station has the ability to
+ learn of new entries added to this table without
+ downloading the entire table.
+
+ It is important to note that the index for a
+ particular entry may change as an (earlier) entry
+ is deleted from the table. Because this order may
+ change, management stations should make use of the
+ hostControlLastDeleteTime variable in the
+ hostControlEntry associated with the relevant
+ portion of the hostTimeTable. By observing
+ this variable, the management station may detect
+ the circumstances where a download of the table
+ may have missed entries, and where a previous
+ association between a value of hostTimeCreationOrder
+ and a hostTimeEntry may no longer hold."
+ ::= { hostTimeEntry 2 }
+
+hostTimeIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The set of collected host statistics of which
+ this entry is a part. The set of hosts
+ identified by a particular value of this
+ index is associated with the hostControlEntry
+ as identified by the same value of hostControlIndex."
+ ::= { hostTimeEntry 3 }
+
+hostTimeInPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of good packets transmitted to this
+ address since it was added to the hostTimeTable."
+ ::= { hostTimeEntry 4 }
+
+hostTimeOutPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets, including bad packets, transmitted
+ by this address since it was added to the hostTimeTable."
+ ::= { hostTimeEntry 5 }
+
+hostTimeInOctets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of octets transmitted to this address since
+ it was added to the hostTimeTable (excluding framing
+ bits but including FCS octets), except for those
+ octets in bad packets."
+ ::= { hostTimeEntry 6 }
+
+hostTimeOutOctets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of octets transmitted by this address since
+ it was added to the hostTimeTable (excluding framing
+ bits but including FCS octets), including those
+ octets in bad packets."
+ ::= { hostTimeEntry 7 }
+
+hostTimeOutErrors OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of bad packets transmitted by this address
+ since this host was added to the hostTimeTable."
+ ::= { hostTimeEntry 8 }
+
+hostTimeOutBroadcastPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of good packets transmitted by this
+ address that were directed to the broadcast address
+ since this host was added to the hostTimeTable."
+ ::= { hostTimeEntry 9 }
+
+hostTimeOutMulticastPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of good packets transmitted by this
+ address that were directed to a multicast address
+ since this host was added to the hostTimeTable.
+ Note that this number does not include packets directed
+ to the broadcast address."
+ ::= { hostTimeEntry 10 }
+
+-- The Host Top "N" Group
+
+-- Implementation of the Host Top N group is optional. The Host Top N
+-- group requires the implementation of the host group.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The Host Top N group is used to prepare reports that describe
+-- the hosts that top a list ordered by one of their statistics.
+-- The available statistics are samples of one of their
+-- base statistics, over an interval specified by the management
+-- station. Thus, these statistics are rate based. The management
+-- station also selects how many such hosts are reported.
+
+-- The hostTopNControlTable is used to initiate the generation of
+-- such a report. The management station may select the parameters
+-- of such a report, such as which interface, which statistic,
+-- how many hosts, and the start and stop times of the sampling.
+-- When the report is prepared, entries are created in the
+-- hostTopNTable associated with the relevant hostTopNControlEntry.
+-- These entries are static for each report after it has been
+-- prepared.
+
+hostTopNControlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HostTopNControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of top N host control entries."
+ ::= { hostTopN 1 }
+
+hostTopNControlEntry OBJECT-TYPE
+ SYNTAX HostTopNControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A set of parameters that control the creation of a report
+ of the top N hosts according to several metrics. For
+ example, an instance of the hostTopNDuration object might
+ be named hostTopNDuration.3"
+ INDEX { hostTopNControlIndex }
+ ::= { hostTopNControlTable 1 }
+
+HostTopNControlEntry ::= SEQUENCE {
+ hostTopNControlIndex Integer32,
+ hostTopNHostIndex Integer32,
+ hostTopNRateBase INTEGER,
+ hostTopNTimeRemaining Integer32,
+ hostTopNDuration Integer32,
+ hostTopNRequestedSize Integer32,
+ hostTopNGrantedSize Integer32,
+ hostTopNStartTime TimeTicks,
+ hostTopNOwner OwnerString,
+ hostTopNStatus EntryStatus
+}
+
+hostTopNControlIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry
+ in the hostTopNControl table. Each such
+ entry defines one top N report prepared for
+ one interface."
+ ::= { hostTopNControlEntry 1 }
+
+hostTopNHostIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The host table for which a top N report will be prepared
+ on behalf of this entry. The host table identified by a
+ particular value of this index is associated with the same
+ host table as identified by the same value of
+ hostIndex.
+
+ This object may not be modified if the associated
+ hostTopNStatus object is equal to valid(1)."
+ ::= { hostTopNControlEntry 2 }
+
+hostTopNRateBase OBJECT-TYPE
+ SYNTAX INTEGER {
+ hostTopNInPkts(1),
+ hostTopNOutPkts(2),
+ hostTopNInOctets(3),
+ hostTopNOutOctets(4),
+ hostTopNOutErrors(5),
+ hostTopNOutBroadcastPkts(6),
+ hostTopNOutMulticastPkts(7)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The variable for each host that the hostTopNRate
+ variable is based upon.
+
+ This object may not be modified if the associated
+ hostTopNStatus object is equal to valid(1)."
+ ::= { hostTopNControlEntry 3 }
+
+hostTopNTimeRemaining OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Seconds"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The number of seconds left in the report currently being
+ collected. When this object is modified by the management
+ station, a new collection is started, possibly aborting
+ a currently running report. The new value is used
+ as the requested duration of this report, which is
+ loaded into the associated hostTopNDuration object.
+
+ When this object is set to a non-zero value, any
+ associated hostTopNEntries shall be made
+ inaccessible by the monitor. While the value of this
+ object is non-zero, it decrements by one per second until
+ it reaches zero. During this time, all associated
+ hostTopNEntries shall remain inaccessible. At the time
+ that this object decrements to zero, the report is made
+ accessible in the hostTopNTable. Thus, the hostTopN
+ table needs to be created only at the end of the collection
+ interval."
+ DEFVAL { 0 }
+ ::= { hostTopNControlEntry 4 }
+
+hostTopNDuration OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Seconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of seconds that this report has collected
+ during the last sampling interval, or if this
+ report is currently being collected, the number
+ of seconds that this report is being collected
+ during this sampling interval.
+
+ When the associated hostTopNTimeRemaining object is set,
+ this object shall be set by the probe to the same value
+ and shall not be modified until the next time
+ the hostTopNTimeRemaining is set.
+
+ This value shall be zero if no reports have been
+ requested for this hostTopNControlEntry."
+ DEFVAL { 0 }
+ ::= { hostTopNControlEntry 5 }
+
+hostTopNRequestedSize OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum number of hosts requested for the top N
+ table.
+
+ When this object is created or modified, the probe
+ should set hostTopNGrantedSize as closely to this
+ object as is possible for the particular probe
+ implementation and available resources."
+ DEFVAL { 10 }
+ ::= { hostTopNControlEntry 6 }
+
+hostTopNGrantedSize OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum number of hosts in the top N table.
+
+ When the associated hostTopNRequestedSize object is
+ created or modified, the probe should set this
+ object as closely to the requested value as is possible
+ for the particular implementation and available
+ resources. The probe must not lower this value except
+ as a result of a set to the associated
+ hostTopNRequestedSize object.
+
+ Hosts with the highest value of hostTopNRate shall be
+ placed in this table in decreasing order of this rate
+ until there is no more room or until there are no more
+ hosts."
+ ::= { hostTopNControlEntry 7 }
+
+hostTopNStartTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when this top N report was
+ last started. In other words, this is the time that
+ the associated hostTopNTimeRemaining object was
+ modified to start the requested report."
+ ::= { hostTopNControlEntry 8 }
+
+hostTopNOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The entity that configured this entry and is therefore
+ using the resources assigned to it."
+ ::= { hostTopNControlEntry 9 }
+
+hostTopNStatus OBJECT-TYPE
+ SYNTAX EntryStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this hostTopNControl entry.
+
+ If this object is not equal to valid(1), all associated
+ hostTopNEntries shall be deleted by the agent."
+ ::= { hostTopNControlEntry 10 }
+
+hostTopNTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF HostTopNEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of top N host entries."
+ ::= { hostTopN 2 }
+
+hostTopNEntry OBJECT-TYPE
+ SYNTAX HostTopNEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A set of statistics for a host that is part of a top N
+ report. For example, an instance of the hostTopNRate
+ object might be named hostTopNRate.3.10"
+ INDEX { hostTopNReport, hostTopNIndex }
+ ::= { hostTopNTable 1 }
+
+HostTopNEntry ::= SEQUENCE {
+ hostTopNReport Integer32,
+ hostTopNIndex Integer32,
+ hostTopNAddress OCTET STRING,
+ hostTopNRate Integer32
+}
+
+hostTopNReport OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object identifies the top N report of which
+ this entry is a part. The set of hosts
+ identified by a particular value of this
+ object is part of the same report as identified
+ by the same value of the hostTopNControlIndex object."
+ ::= { hostTopNEntry 1 }
+
+hostTopNIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry in
+ the hostTopN table among those in the same report.
+ This index is between 1 and N, where N is the
+ number of entries in this table. Increasing values
+ of hostTopNIndex shall be assigned to entries with
+ decreasing values of hostTopNRate until index N
+ is assigned to the entry with the lowest value of
+ hostTopNRate or there are no more hostTopNEntries."
+ ::= { hostTopNEntry 2 }
+
+hostTopNAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The physical address of this host."
+ ::= { hostTopNEntry 3 }
+
+hostTopNRate OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The amount of change in the selected variable
+ during this sampling interval. The selected
+ variable is this host's instance of the object
+ selected by hostTopNRateBase."
+ ::= { hostTopNEntry 4 }
+
+-- The Matrix Group
+
+-- Implementation of the Matrix group is optional.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The Matrix group consists of the matrixControlTable, matrixSDTable
+-- and the matrixDSTable. These tables store statistics for a
+-- particular conversation between two addresses. As the device
+-- detects a new conversation, including those to a non-unicast
+-- address, it creates a new entry in both of the matrix tables.
+-- It must only create new entries based on information
+-- received in good packets. If the monitoring device finds
+-- itself short of resources, it may delete entries as needed.
+-- It is suggested that the device delete the least recently used
+-- entries first.
+
+matrixControlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MatrixControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of information entries for the
+ traffic matrix on each interface."
+ ::= { matrix 1 }
+
+matrixControlEntry OBJECT-TYPE
+ SYNTAX MatrixControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "Information about a traffic matrix on a particular
+ interface. For example, an instance of the
+ matrixControlLastDeleteTime object might be named
+ matrixControlLastDeleteTime.1"
+ INDEX { matrixControlIndex }
+ ::= { matrixControlTable 1 }
+
+MatrixControlEntry ::= SEQUENCE {
+ matrixControlIndex Integer32,
+ matrixControlDataSource OBJECT IDENTIFIER,
+ matrixControlTableSize Integer32,
+ matrixControlLastDeleteTime TimeTicks,
+ matrixControlOwner OwnerString,
+ matrixControlStatus EntryStatus
+}
+
+matrixControlIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry in the
+ matrixControl table. Each such entry defines
+ a function that discovers conversations on a particular
+ interface and places statistics about them in the
+ matrixSDTable and the matrixDSTable on behalf of this
+ matrixControlEntry."
+ ::= { matrixControlEntry 1 }
+
+matrixControlDataSource OBJECT-TYPE
+ SYNTAX OBJECT IDENTIFIER
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object identifies the source of
+ the data from which this entry creates a traffic matrix.
+ This source can be any interface on this device. In
+ order to identify a particular interface, this object
+ shall identify the instance of the ifIndex object,
+ defined in RFC 2233 [17], for the desired
+ interface. For example, if an entry were to receive data
+ from interface #1, this object would be set to ifIndex.1.
+
+ The statistics in this group reflect all packets
+ on the local network segment attached to the identified
+ interface.
+
+ An agent may or may not be able to tell if fundamental
+ changes to the media of the interface have occurred and
+ necessitate an invalidation of this entry. For example, a
+ hot-pluggable ethernet card could be pulled out and replaced
+ by a token-ring card. In such a case, if the agent has such
+ knowledge of the change, it is recommended that it
+ invalidate this entry.
+
+ This object may not be modified if the associated
+ matrixControlStatus object is equal to valid(1)."
+ ::= { matrixControlEntry 2 }
+
+matrixControlTableSize OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of matrixSDEntries in the matrixSDTable
+ for this interface. This must also be the value of
+ the number of entries in the matrixDSTable for this
+ interface."
+ ::= { matrixControlEntry 3 }
+
+matrixControlLastDeleteTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when the last entry
+ was deleted from the portion of the matrixSDTable
+ or matrixDSTable associated with this matrixControlEntry.
+ If no deletions have occurred, this value shall be
+ zero."
+ ::= { matrixControlEntry 4 }
+
+matrixControlOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The entity that configured this entry and is therefore
+ using the resources assigned to it."
+ ::= { matrixControlEntry 5 }
+
+matrixControlStatus OBJECT-TYPE
+ SYNTAX EntryStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this matrixControl entry.
+ If this object is not equal to valid(1), all associated
+ entries in the matrixSDTable and the matrixDSTable
+ shall be deleted by the agent."
+ ::= { matrixControlEntry 6 }
+
+matrixSDTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MatrixSDEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of traffic matrix entries indexed by
+ source and destination MAC address."
+ ::= { matrix 2 }
+
+matrixSDEntry OBJECT-TYPE
+ SYNTAX MatrixSDEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A collection of statistics for communications between
+ two addresses on a particular interface. For example,
+ an instance of the matrixSDPkts object might be named
+ matrixSDPkts.1.6.8.0.32.27.3.176.6.8.0.32.10.8.113"
+ INDEX { matrixSDIndex,
+ matrixSDSourceAddress, matrixSDDestAddress }
+ ::= { matrixSDTable 1 }
+
+MatrixSDEntry ::= SEQUENCE {
+ matrixSDSourceAddress OCTET STRING,
+ matrixSDDestAddress OCTET STRING,
+ matrixSDIndex Integer32,
+ matrixSDPkts Counter32,
+ matrixSDOctets Counter32,
+ matrixSDErrors Counter32
+}
+
+matrixSDSourceAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The source physical address."
+ ::= { matrixSDEntry 1 }
+
+matrixSDDestAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The destination physical address."
+ ::= { matrixSDEntry 2 }
+
+matrixSDIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The set of collected matrix statistics of which
+ this entry is a part. The set of matrix statistics
+ identified by a particular value of this index
+ is associated with the same matrixControlEntry
+ as identified by the same value of matrixControlIndex."
+ ::= { matrixSDEntry 3 }
+
+matrixSDPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets transmitted from the source
+ address to the destination address (this number includes
+ bad packets)."
+ ::= { matrixSDEntry 4 }
+
+matrixSDOctets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of octets (excluding framing bits but
+ including FCS octets) contained in all packets
+ transmitted from the source address to the
+ destination address."
+ ::= { matrixSDEntry 5 }
+
+matrixSDErrors OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of bad packets transmitted from
+ the source address to the destination address."
+ ::= { matrixSDEntry 6 }
+
+-- Traffic matrix tables from destination to source
+
+matrixDSTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF MatrixDSEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of traffic matrix entries indexed by
+ destination and source MAC address."
+ ::= { matrix 3 }
+
+matrixDSEntry OBJECT-TYPE
+ SYNTAX MatrixDSEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A collection of statistics for communications between
+ two addresses on a particular interface. For example,
+ an instance of the matrixSDPkts object might be named
+ matrixSDPkts.1.6.8.0.32.10.8.113.6.8.0.32.27.3.176"
+ INDEX { matrixDSIndex,
+ matrixDSDestAddress, matrixDSSourceAddress }
+ ::= { matrixDSTable 1 }
+
+MatrixDSEntry ::= SEQUENCE {
+ matrixDSSourceAddress OCTET STRING,
+ matrixDSDestAddress OCTET STRING,
+ matrixDSIndex Integer32,
+ matrixDSPkts Counter32,
+ matrixDSOctets Counter32,
+ matrixDSErrors Counter32
+}
+
+matrixDSSourceAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The source physical address."
+ ::= { matrixDSEntry 1 }
+
+matrixDSDestAddress OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The destination physical address."
+ ::= { matrixDSEntry 2 }
+
+matrixDSIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The set of collected matrix statistics of which
+ this entry is a part. The set of matrix statistics
+ identified by a particular value of this index
+ is associated with the same matrixControlEntry
+ as identified by the same value of matrixControlIndex."
+ ::= { matrixDSEntry 3 }
+
+matrixDSPkts OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets transmitted from the source
+ address to the destination address (this number includes
+ bad packets)."
+ ::= { matrixDSEntry 4 }
+
+matrixDSOctets OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of octets (excluding framing bits
+ but including FCS octets) contained in all packets
+ transmitted from the source address to the
+ destination address."
+ ::= { matrixDSEntry 5 }
+
+matrixDSErrors OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of bad packets transmitted from
+ the source address to the destination address."
+ ::= { matrixDSEntry 6 }
+
+-- The Filter Group
+
+-- Implementation of the Filter group is optional.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The Filter group allows packets to be captured with an
+-- arbitrary filter expression. A logical data and
+-- event stream or "channel" is formed by the packets
+-- that match the filter expression.
+--
+-- This filter mechanism allows the creation of an arbitrary
+-- logical expression with which to filter packets. Each
+-- filter associated with a channel is OR'ed with the others.
+-- Within a filter, any bits checked in the data and status are
+-- AND'ed with respect to other bits in the same filter. The
+-- NotMask also allows for checking for inequality. Finally,
+-- the channelAcceptType object allows for inversion of the
+-- whole equation.
+--
+-- If a management station wishes to receive a trap to alert it
+-- that new packets have been captured and are available for
+-- download, it is recommended that it set up an alarm entry that
+-- monitors the value of the relevant channelMatches instance.
+--
+-- The channel can be turned on or off, and can also
+-- generate events when packets pass through it.
+
+filterTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF FilterEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of packet filter entries."
+ ::= { filter 1 }
+
+filterEntry OBJECT-TYPE
+ SYNTAX FilterEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A set of parameters for a packet filter applied on a
+ particular interface. As an example, an instance of the
+ filterPktData object might be named filterPktData.12"
+ INDEX { filterIndex }
+ ::= { filterTable 1 }
+
+FilterEntry ::= SEQUENCE {
+ filterIndex Integer32,
+ filterChannelIndex Integer32,
+ filterPktDataOffset Integer32,
+ filterPktData OCTET STRING,
+ filterPktDataMask OCTET STRING,
+ filterPktDataNotMask OCTET STRING,
+ filterPktStatus Integer32,
+ filterPktStatusMask Integer32,
+ filterPktStatusNotMask Integer32,
+ filterOwner OwnerString,
+ filterStatus EntryStatus
+}
+
+filterIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry
+ in the filter table. Each such entry defines
+ one filter that is to be applied to every packet
+ received on an interface."
+ ::= { filterEntry 1 }
+
+filterChannelIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object identifies the channel of which this filter
+ is a part. The filters identified by a particular value
+ of this object are associated with the same channel as
+ identified by the same value of the channelIndex object."
+ ::= { filterEntry 2 }
+
+filterPktDataOffset OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Octets"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The offset from the beginning of each packet where
+ a match of packet data will be attempted. This offset
+ is measured from the point in the physical layer
+ packet after the framing bits, if any. For example,
+ in an Ethernet frame, this point is at the beginning of
+ the destination MAC address.
+
+ This object may not be modified if the associated
+ filterStatus object is equal to valid(1)."
+ DEFVAL { 0 }
+
+ ::= { filterEntry 3 }
+
+filterPktData OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The data that is to be matched with the input packet.
+ For each packet received, this filter and the accompanying
+ filterPktDataMask and filterPktDataNotMask will be
+ adjusted for the offset. The only bits relevant to this
+ match algorithm are those that have the corresponding
+ filterPktDataMask bit equal to one. The following three
+ rules are then applied to every packet:
+
+ (1) If the packet is too short and does not have data
+ corresponding to part of the filterPktData, the packet
+ will fail this data match.
+
+ (2) For each relevant bit from the packet with the
+ corresponding filterPktDataNotMask bit set to zero, if
+ the bit from the packet is not equal to the corresponding
+ bit from the filterPktData, then the packet will fail
+ this data match.
+
+ (3) If for every relevant bit from the packet with the
+ corresponding filterPktDataNotMask bit set to one, the
+ bit from the packet is equal to the corresponding bit
+ from the filterPktData, then the packet will fail this
+ data match.
+
+ Any packets that have not failed any of the three matches
+ above have passed this data match. In particular, a zero
+ length filter will match any packet.
+
+ This object may not be modified if the associated
+ filterStatus object is equal to valid(1)."
+ ::= { filterEntry 4 }
+
+filterPktDataMask OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The mask that is applied to the match process.
+ After adjusting this mask for the offset, only those
+ bits in the received packet that correspond to bits set
+ in this mask are relevant for further processing by the
+ match algorithm. The offset is applied to filterPktDataMask
+ in the same way it is applied to the filter. For the
+ purposes of the matching algorithm, if the associated
+ filterPktData object is longer than this mask, this mask is
+ conceptually extended with '1' bits until it reaches the
+ length of the filterPktData object.
+
+ This object may not be modified if the associated
+ filterStatus object is equal to valid(1)."
+ ::= { filterEntry 5 }
+
+filterPktDataNotMask OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The inversion mask that is applied to the match
+ process. After adjusting this mask for the offset,
+ those relevant bits in the received packet that correspond
+ to bits cleared in this mask must all be equal to their
+ corresponding bits in the filterPktData object for the packet
+ to be accepted. In addition, at least one of those relevant
+ bits in the received packet that correspond to bits set in
+ this mask must be different to its corresponding bit in the
+ filterPktData object.
+
+ For the purposes of the matching algorithm, if the associated
+ filterPktData object is longer than this mask, this mask is
+ conceptually extended with '0' bits until it reaches the
+ length of the filterPktData object.
+
+ This object may not be modified if the associated
+ filterStatus object is equal to valid(1)."
+ ::= { filterEntry 6 }
+
+filterPktStatus OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status that is to be matched with the input packet.
+ The only bits relevant to this match algorithm are those that
+ have the corresponding filterPktStatusMask bit equal to one.
+ The following two rules are then applied to every packet:
+
+ (1) For each relevant bit from the packet status with the
+ corresponding filterPktStatusNotMask bit set to zero, if
+ the bit from the packet status is not equal to the
+ corresponding bit from the filterPktStatus, then the
+ packet will fail this status match.
+
+ (2) If for every relevant bit from the packet status with the
+ corresponding filterPktStatusNotMask bit set to one, the
+ bit from the packet status is equal to the corresponding
+ bit from the filterPktStatus, then the packet will fail
+ this status match.
+
+ Any packets that have not failed either of the two matches
+ above have passed this status match. In particular, a zero
+ length status filter will match any packet's status.
+
+ The value of the packet status is a sum. This sum
+ initially takes the value zero. Then, for each
+ error, E, that has been discovered in this packet,
+ 2 raised to a value representing E is added to the sum.
+ The errors and the bits that represent them are dependent
+ on the media type of the interface that this channel
+ is receiving packets from.
+
+ The errors defined for a packet captured off of an
+ Ethernet interface are as follows:
+
+ bit # Error
+ 0 Packet is longer than 1518 octets
+ 1 Packet is shorter than 64 octets
+ 2 Packet experienced a CRC or Alignment error
+
+ For example, an Ethernet fragment would have a
+ value of 6 (2^1 + 2^2).
+
+ As this MIB is expanded to new media types, this object
+ will have other media-specific errors defined.
+
+ For the purposes of this status matching algorithm, if the
+ packet status is longer than this filterPktStatus object,
+ this object is conceptually extended with '0' bits until it
+ reaches the size of the packet status.
+
+ This object may not be modified if the associated
+ filterStatus object is equal to valid(1)."
+ ::= { filterEntry 7 }
+
+filterPktStatusMask OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The mask that is applied to the status match process.
+ Only those bits in the received packet that correspond to
+ bits set in this mask are relevant for further processing
+ by the status match algorithm. For the purposes
+ of the matching algorithm, if the associated filterPktStatus
+ object is longer than this mask, this mask is conceptually
+ extended with '1' bits until it reaches the size of the
+ filterPktStatus. In addition, if a packet status is longer
+ than this mask, this mask is conceptually extended with '0'
+ bits until it reaches the size of the packet status.
+
+ This object may not be modified if the associated
+ filterStatus object is equal to valid(1)."
+ ::= { filterEntry 8 }
+
+filterPktStatusNotMask OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The inversion mask that is applied to the status match
+ process. Those relevant bits in the received packet status
+ that correspond to bits cleared in this mask must all be
+ equal to their corresponding bits in the filterPktStatus
+ object for the packet to be accepted. In addition, at least
+ one of those relevant bits in the received packet status
+ that correspond to bits set in this mask must be different
+ to its corresponding bit in the filterPktStatus object for
+ the packet to be accepted.
+
+ For the purposes of the matching algorithm, if the associated
+ filterPktStatus object or a packet status is longer than this
+ mask, this mask is conceptually extended with '0' bits until
+ it reaches the longer of the lengths of the filterPktStatus
+ object and the packet status.
+
+ This object may not be modified if the associated
+ filterStatus object is equal to valid(1)."
+ ::= { filterEntry 9 }
+
+filterOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The entity that configured this entry and is therefore
+ using the resources assigned to it."
+ ::= { filterEntry 10 }
+
+filterStatus OBJECT-TYPE
+ SYNTAX EntryStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this filter entry."
+ ::= { filterEntry 11 }
+
+channelTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF ChannelEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of packet channel entries."
+ ::= { filter 2 }
+
+channelEntry OBJECT-TYPE
+ SYNTAX ChannelEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A set of parameters for a packet channel applied on a
+ particular interface. As an example, an instance of the
+ channelMatches object might be named channelMatches.3"
+ INDEX { channelIndex }
+ ::= { channelTable 1 }
+
+ChannelEntry ::= SEQUENCE {
+ channelIndex Integer32,
+ channelIfIndex Integer32,
+ channelAcceptType INTEGER,
+ channelDataControl INTEGER,
+ channelTurnOnEventIndex Integer32,
+ channelTurnOffEventIndex Integer32,
+ channelEventIndex Integer32,
+ channelEventStatus INTEGER,
+ channelMatches Counter32,
+ channelDescription DisplayString,
+ channelOwner OwnerString,
+ channelStatus EntryStatus
+}
+
+channelIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry in the channel
+ table. Each such entry defines one channel, a logical
+ data and event stream.
+
+ It is suggested that before creating a channel, an
+ application should scan all instances of the
+ filterChannelIndex object to make sure that there are no
+ pre-existing filters that would be inadvertently be linked
+ to the channel."
+ ::= { channelEntry 1 }
+
+channelIfIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object uniquely identifies the
+ interface on this remote network monitoring device to which
+ the associated filters are applied to allow data into this
+ channel. The interface identified by a particular value
+ of this object is the same interface as identified by the
+ same value of the ifIndex object, defined in RFC 2233 [17].
+
+ The filters in this group are applied to all packets on
+ the local network segment attached to the identified
+ interface.
+
+ An agent may or may not be able to tell if fundamental
+ changes to the media of the interface have occurred and
+ necessitate an invalidation of this entry. For example, a
+ hot-pluggable ethernet card could be pulled out and replaced
+ by a token-ring card. In such a case, if the agent has such
+ knowledge of the change, it is recommended that it
+ invalidate this entry.
+
+ This object may not be modified if the associated
+ channelStatus object is equal to valid(1)."
+ ::= { channelEntry 2 }
+
+channelAcceptType OBJECT-TYPE
+ SYNTAX INTEGER {
+ acceptMatched(1),
+ acceptFailed(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object controls the action of the filters
+ associated with this channel. If this object is equal
+ to acceptMatched(1), packets will be accepted to this
+ channel if they are accepted by both the packet data and
+ packet status matches of an associated filter. If
+ this object is equal to acceptFailed(2), packets will
+ be accepted to this channel only if they fail either
+ the packet data match or the packet status match of
+ each of the associated filters.
+
+ In particular, a channel with no associated filters will
+ match no packets if set to acceptMatched(1) case and will
+ match all packets in the acceptFailed(2) case.
+
+ This object may not be modified if the associated
+ channelStatus object is equal to valid(1)."
+ ::= { channelEntry 3 }
+
+channelDataControl OBJECT-TYPE
+ SYNTAX INTEGER {
+ on(1),
+ off(2)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "This object controls the flow of data through this channel.
+ If this object is on(1), data, status and events flow
+ through this channel. If this object is off(2), data,
+ status and events will not flow through this channel."
+ DEFVAL { off }
+ ::= { channelEntry 4 }
+
+channelTurnOnEventIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the event
+ that is configured to turn the associated
+ channelDataControl from off to on when the event is
+ generated. The event identified by a particular value
+ of this object is the same event as identified by the
+ same value of the eventIndex object. If there is no
+ corresponding entry in the eventTable, then no
+ association exists. In fact, if no event is intended
+ for this channel, channelTurnOnEventIndex must be
+ set to zero, a non-existent event index.
+
+ This object may not be modified if the associated
+ channelStatus object is equal to valid(1)."
+ ::= { channelEntry 5 }
+
+channelTurnOffEventIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the event
+ that is configured to turn the associated
+ channelDataControl from on to off when the event is
+ generated. The event identified by a particular value
+ of this object is the same event as identified by the
+ same value of the eventIndex object. If there is no
+ corresponding entry in the eventTable, then no
+ association exists. In fact, if no event is intended
+ for this channel, channelTurnOffEventIndex must be
+ set to zero, a non-existent event index.
+
+ This object may not be modified if the associated
+ channelStatus object is equal to valid(1)."
+ ::= { channelEntry 6 }
+
+channelEventIndex OBJECT-TYPE
+ SYNTAX Integer32 (0..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The value of this object identifies the event
+ that is configured to be generated when the
+ associated channelDataControl is on and a packet
+ is matched. The event identified by a particular value
+ of this object is the same event as identified by the
+ same value of the eventIndex object. If there is no
+ corresponding entry in the eventTable, then no
+ association exists. In fact, if no event is intended
+ for this channel, channelEventIndex must be
+ set to zero, a non-existent event index.
+
+ This object may not be modified if the associated
+ channelStatus object is equal to valid(1)."
+ ::= { channelEntry 7 }
+
+channelEventStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ eventReady(1),
+ eventFired(2),
+ eventAlwaysReady(3)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The event status of this channel.
+
+ If this channel is configured to generate events
+ when packets are matched, a means of controlling
+ the flow of those events is often needed. When
+ this object is equal to eventReady(1), a single
+ event may be generated, after which this object
+ will be set by the probe to eventFired(2). While
+ in the eventFired(2) state, no events will be
+ generated until the object is modified to
+ eventReady(1) (or eventAlwaysReady(3)). The
+ management station can thus easily respond to a
+ notification of an event by re-enabling this object.
+
+ If the management station wishes to disable this
+ flow control and allow events to be generated
+ at will, this object may be set to
+ eventAlwaysReady(3). Disabling the flow control
+ is discouraged as it can result in high network
+ traffic or other performance problems."
+ DEFVAL { eventReady }
+ ::= { channelEntry 8 }
+
+channelMatches OBJECT-TYPE
+ SYNTAX Counter32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of times this channel has matched a packet.
+ Note that this object is updated even when
+ channelDataControl is set to off."
+ ::= { channelEntry 9 }
+
+channelDescription OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..127))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A comment describing this channel."
+ ::= { channelEntry 10 }
+
+channelOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The entity that configured this entry and is therefore
+ using the resources assigned to it."
+ ::= { channelEntry 11 }
+
+channelStatus OBJECT-TYPE
+ SYNTAX EntryStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this channel entry."
+ ::= { channelEntry 12 }
+
+-- The Packet Capture Group
+
+-- Implementation of the Packet Capture group is optional. The Packet
+-- Capture Group requires implementation of the Filter Group.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The Packet Capture group allows packets to be captured
+-- upon a filter match. The bufferControlTable controls
+-- the captured packets output from a channel that is
+-- associated with it. The captured packets are placed
+-- in entries in the captureBufferTable. These entries are
+-- associated with the bufferControlEntry on whose behalf they
+-- were stored.
+
+bufferControlTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF BufferControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of buffers control entries."
+ ::= { capture 1 }
+
+bufferControlEntry OBJECT-TYPE
+ SYNTAX BufferControlEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A set of parameters that control the collection of a stream
+ of packets that have matched filters. As an example, an
+ instance of the bufferControlCaptureSliceSize object might
+ be named bufferControlCaptureSliceSize.3"
+
+ INDEX { bufferControlIndex }
+ ::= { bufferControlTable 1 }
+
+BufferControlEntry ::= SEQUENCE {
+ bufferControlIndex Integer32,
+ bufferControlChannelIndex Integer32,
+ bufferControlFullStatus INTEGER,
+ bufferControlFullAction INTEGER,
+ bufferControlCaptureSliceSize Integer32,
+ bufferControlDownloadSliceSize Integer32,
+ bufferControlDownloadOffset Integer32,
+ bufferControlMaxOctetsRequested Integer32,
+ bufferControlMaxOctetsGranted Integer32,
+ bufferControlCapturedPackets Integer32,
+ bufferControlTurnOnTime TimeTicks,
+ bufferControlOwner OwnerString,
+ bufferControlStatus EntryStatus
+}
+
+bufferControlIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry
+ in the bufferControl table. The value of this
+ index shall never be zero. Each such
+ entry defines one set of packets that is
+ captured and controlled by one or more filters."
+ ::= { bufferControlEntry 1 }
+
+bufferControlChannelIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "An index that identifies the channel that is the
+ source of packets for this bufferControl table.
+ The channel identified by a particular value of this
+ index is the same as identified by the same value of
+ the channelIndex object.
+
+ This object may not be modified if the associated
+ bufferControlStatus object is equal to valid(1)."
+ ::= { bufferControlEntry 2 }
+
+bufferControlFullStatus OBJECT-TYPE
+ SYNTAX INTEGER {
+ spaceAvailable(1),
+ full(2)
+ }
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "This object shows whether the buffer has room to
+ accept new packets or if it is full.
+
+ If the status is spaceAvailable(1), the buffer is
+ accepting new packets normally. If the status is
+ full(2) and the associated bufferControlFullAction
+ object is wrapWhenFull, the buffer is accepting new
+ packets by deleting enough of the oldest packets
+ to make room for new ones as they arrive. Otherwise,
+ if the status is full(2) and the
+ bufferControlFullAction object is lockWhenFull,
+ then the buffer has stopped collecting packets.
+
+ When this object is set to full(2) the probe must
+ not later set it to spaceAvailable(1) except in the
+ case of a significant gain in resources such as
+ an increase of bufferControlOctetsGranted. In
+ particular, the wrap-mode action of deleting old
+ packets to make room for newly arrived packets
+ must not affect the value of this object."
+ ::= { bufferControlEntry 3 }
+
+bufferControlFullAction OBJECT-TYPE
+ SYNTAX INTEGER {
+ lockWhenFull(1),
+ wrapWhenFull(2) -- FIFO
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "Controls the action of the buffer when it
+ reaches the full status. When in the lockWhenFull(1)
+ state and a packet is added to the buffer that
+ fills the buffer, the bufferControlFullStatus will
+ be set to full(2) and this buffer will stop capturing
+ packets."
+ ::= { bufferControlEntry 4 }
+
+bufferControlCaptureSliceSize OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Octets"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum number of octets of each packet
+ that will be saved in this capture buffer.
+ For example, if a 1500 octet packet is received by
+ the probe and this object is set to 500, then only
+ 500 octets of the packet will be stored in the
+ associated capture buffer. If this variable is set
+ to 0, the capture buffer will save as many octets
+ as is possible.
+
+ This object may not be modified if the associated
+ bufferControlStatus object is equal to valid(1)."
+ DEFVAL { 100 }
+ ::= { bufferControlEntry 5 }
+
+bufferControlDownloadSliceSize OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Octets"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The maximum number of octets of each packet
+ in this capture buffer that will be returned in
+ an SNMP retrieval of that packet. For example,
+ if 500 octets of a packet have been stored in the
+ associated capture buffer, the associated
+ bufferControlDownloadOffset is 0, and this
+ object is set to 100, then the captureBufferPacket
+ object that contains the packet will contain only
+ the first 100 octets of the packet.
+
+ A prudent manager will take into account possible
+ interoperability or fragmentation problems that may
+ occur if the download slice size is set too large.
+ In particular, conformant SNMP implementations are not
+ required to accept messages whose length exceeds 484
+ octets, although they are encouraged to support larger
+ datagrams whenever feasible."
+ DEFVAL { 100 }
+ ::= { bufferControlEntry 6 }
+
+bufferControlDownloadOffset OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Octets"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The offset of the first octet of each packet
+ in this capture buffer that will be returned in
+ an SNMP retrieval of that packet. For example,
+ if 500 octets of a packet have been stored in the
+ associated capture buffer and this object is set to
+ 100, then the captureBufferPacket object that
+ contains the packet will contain bytes starting
+ 100 octets into the packet."
+ DEFVAL { 0 }
+ ::= { bufferControlEntry 7 }
+
+bufferControlMaxOctetsRequested OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Octets"
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The requested maximum number of octets to be
+ saved in this captureBuffer, including any
+ implementation-specific overhead. If this variable
+ is set to -1, the capture buffer will save as many
+ octets as is possible.
+
+ When this object is created or modified, the probe
+ should set bufferControlMaxOctetsGranted as closely
+ to this object as is possible for the particular probe
+ implementation and available resources. However, if
+ the object has the special value of -1, the probe
+ must set bufferControlMaxOctetsGranted to -1."
+ DEFVAL { -1 }
+ ::= { bufferControlEntry 8 }
+
+bufferControlMaxOctetsGranted OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The maximum number of octets that can be
+ saved in this captureBuffer, including overhead.
+ If this variable is -1, the capture buffer will save
+ as many octets as possible.
+
+ When the bufferControlMaxOctetsRequested object is
+ created or modified, the probe should set this object
+ as closely to the requested value as is possible for the
+ particular probe implementation and available resources.
+ However, if the request object has the special value
+ of -1, the probe must set this object to -1.
+
+ The probe must not lower this value except as a result of
+ a modification to the associated
+ bufferControlMaxOctetsRequested object.
+
+ When this maximum number of octets is reached
+ and a new packet is to be added to this
+ capture buffer and the corresponding
+ bufferControlFullAction is set to wrapWhenFull(2),
+ enough of the oldest packets associated with this
+ capture buffer shall be deleted by the agent so
+ that the new packet can be added. If the corresponding
+ bufferControlFullAction is set to lockWhenFull(1),
+ the new packet shall be discarded. In either case,
+ the probe must set bufferControlFullStatus to
+ full(2).
+
+ When the value of this object changes to a value less
+ than the current value, entries are deleted from
+ the captureBufferTable associated with this
+ bufferControlEntry. Enough of the
+ oldest of these captureBufferEntries shall be
+ deleted by the agent so that the number of octets
+ used remains less than or equal to the new value of
+ this object.
+
+ When the value of this object changes to a value greater
+ than the current value, the number of associated
+ captureBufferEntries may be allowed to grow."
+ ::= { bufferControlEntry 9 }
+
+bufferControlCapturedPackets OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Packets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of packets currently in this captureBuffer."
+ ::= { bufferControlEntry 10 }
+
+bufferControlTurnOnTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when this capture buffer was
+ first turned on."
+ ::= { bufferControlEntry 11 }
+
+bufferControlOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The entity that configured this entry and is therefore
+ using the resources assigned to it."
+ ::= { bufferControlEntry 12 }
+
+bufferControlStatus OBJECT-TYPE
+ SYNTAX EntryStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this buffer Control Entry."
+ ::= { bufferControlEntry 13 }
+
+captureBufferTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF CaptureBufferEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of packets captured off of a channel."
+ ::= { capture 2 }
+
+captureBufferEntry OBJECT-TYPE
+ SYNTAX CaptureBufferEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A packet captured off of an attached network. As an
+ example, an instance of the captureBufferPacketData
+ object might be named captureBufferPacketData.3.1783"
+ INDEX { captureBufferControlIndex, captureBufferIndex }
+ ::= { captureBufferTable 1 }
+
+CaptureBufferEntry ::= SEQUENCE {
+ captureBufferControlIndex Integer32,
+ captureBufferIndex Integer32,
+ captureBufferPacketID Integer32,
+ captureBufferPacketData OCTET STRING,
+ captureBufferPacketLength Integer32,
+ captureBufferPacketTime Integer32,
+ captureBufferPacketStatus Integer32
+}
+
+captureBufferControlIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The index of the bufferControlEntry with which
+ this packet is associated."
+ ::= { captureBufferEntry 1 }
+
+captureBufferIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry
+ in the captureBuffer table associated with a
+ particular bufferControlEntry. This index will
+ start at 1 and increase by one for each new packet
+ added with the same captureBufferControlIndex.
+
+ Should this value reach 2147483647, the next packet
+ added with the same captureBufferControlIndex shall
+ cause this value to wrap around to 1."
+ ::= { captureBufferEntry 2 }
+
+captureBufferPacketID OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that describes the order of packets
+ that are received on a particular interface.
+ The packetID of a packet captured on an
+ interface is defined to be greater than the
+ packetID's of all packets captured previously on
+ the same interface. As the captureBufferPacketID
+ object has a maximum positive value of 2^31 - 1,
+ any captureBufferPacketID object shall have the
+ value of the associated packet's packetID mod 2^31."
+ ::= { captureBufferEntry 3 }
+
+captureBufferPacketData OBJECT-TYPE
+ SYNTAX OCTET STRING
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The data inside the packet, starting at the beginning
+ of the packet plus any offset specified in the
+ associated bufferControlDownloadOffset, including any
+ link level headers. The length of the data in this object
+ is the minimum of the length of the captured packet minus
+ the offset, the length of the associated
+ bufferControlCaptureSliceSize minus the offset, and the
+ associated bufferControlDownloadSliceSize. If this minimum
+ is less than zero, this object shall have a length of zero."
+ ::= { captureBufferEntry 4 }
+
+captureBufferPacketLength OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Octets"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The actual length (off the wire) of the packet stored
+ in this entry, including FCS octets."
+ ::= { captureBufferEntry 5 }
+
+captureBufferPacketTime OBJECT-TYPE
+ SYNTAX Integer32
+ UNITS "Milliseconds"
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The number of milliseconds that had passed since
+ this capture buffer was first turned on when this
+ packet was captured."
+ ::= { captureBufferEntry 6 }
+
+captureBufferPacketStatus OBJECT-TYPE
+ SYNTAX Integer32
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "A value which indicates the error status of this packet.
+
+ The value of this object is defined in the same way as
+ filterPktStatus. The value is a sum. This sum
+ initially takes the value zero. Then, for each
+ error, E, that has been discovered in this packet,
+ 2 raised to a value representing E is added to the sum.
+
+ The errors defined for a packet captured off of an
+ Ethernet interface are as follows:
+
+ bit # Error
+ 0 Packet is longer than 1518 octets
+ 1 Packet is shorter than 64 octets
+ 2 Packet experienced a CRC or Alignment error
+ 3 First packet in this capture buffer after
+ it was detected that some packets were
+ not processed correctly.
+ 4 Packet's order in buffer is only approximate
+ (May only be set for packets sent from
+ the probe)
+
+ For example, an Ethernet fragment would have a
+ value of 6 (2^1 + 2^2).
+
+ As this MIB is expanded to new media types, this object
+ will have other media-specific errors defined."
+ ::= { captureBufferEntry 7 }
+
+-- The Event Group
+
+-- Implementation of the Event group is optional.
+-- Consult the MODULE-COMPLIANCE macro for the authoritative
+-- conformance information for this MIB.
+--
+-- The Event group controls the generation and notification
+-- of events from this device. Each entry in the eventTable
+-- describes the parameters of the event that can be triggered.
+-- Each event entry is fired by an associated condition located
+-- elsewhere in the MIB. An event entry may also be associated
+-- with a function elsewhere in the MIB that will be executed
+-- when the event is generated. For example, a channel may
+-- be turned on or off by the firing of an event.
+--
+-- Each eventEntry may optionally specify that a log entry
+-- be created on its behalf whenever the event occurs.
+-- Each entry may also specify that notification should
+-- occur by way of SNMP trap messages. In this case, the
+-- community for the trap message is given in the associated
+-- eventCommunity object. The enterprise and specific trap
+-- fields of the trap are determined by the condition that
+-- triggered the event. Two traps are defined: risingAlarm and
+-- fallingAlarm. If the eventTable is triggered by a condition
+-- specified elsewhere, the enterprise and specific trap fields
+-- must be specified for traps generated for that condition.
+
+eventTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF EventEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of events to be generated."
+ ::= { event 1 }
+
+eventEntry OBJECT-TYPE
+ SYNTAX EventEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A set of parameters that describe an event to be generated
+ when certain conditions are met. As an example, an instance
+ of the eventLastTimeSent object might be named
+ eventLastTimeSent.6"
+ INDEX { eventIndex }
+ ::= { eventTable 1 }
+
+EventEntry ::= SEQUENCE {
+ eventIndex Integer32,
+ eventDescription DisplayString,
+ eventType INTEGER,
+ eventCommunity OCTET STRING,
+ eventLastTimeSent TimeTicks,
+ eventOwner OwnerString,
+ eventStatus EntryStatus
+}
+
+eventIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry in the
+ event table. Each such entry defines one event that
+ is to be generated when the appropriate conditions
+ occur."
+ ::= { eventEntry 1 }
+
+eventDescription OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..127))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "A comment describing this event entry."
+ ::= { eventEntry 2 }
+
+eventType OBJECT-TYPE
+ SYNTAX INTEGER {
+ none(1),
+ log(2),
+ snmptrap(3), -- send an SNMP trap
+ logandtrap(4)
+ }
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The type of notification that the probe will make
+ about this event. In the case of log, an entry is
+ made in the log table for each event. In the case of
+ snmp-trap, an SNMP trap is sent to one or more
+ management stations."
+ ::= { eventEntry 3 }
+
+eventCommunity OBJECT-TYPE
+ SYNTAX OCTET STRING (SIZE (0..127))
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "If an SNMP trap is to be sent, it will be sent to
+ the SNMP community specified by this octet string."
+ ::= { eventEntry 4 }
+
+eventLastTimeSent OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime at the time this event
+ entry last generated an event. If this entry has
+ not generated any events, this value will be
+ zero."
+ ::= { eventEntry 5 }
+
+eventOwner OBJECT-TYPE
+ SYNTAX OwnerString
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The entity that configured this entry and is therefore
+ using the resources assigned to it.
+
+ If this object contains a string starting with 'monitor'
+ and has associated entries in the log table, all connected
+ management stations should retrieve those log entries,
+ as they may have significance to all management stations
+ connected to this device"
+ ::= { eventEntry 6 }
+
+eventStatus OBJECT-TYPE
+ SYNTAX EntryStatus
+ MAX-ACCESS read-create
+ STATUS current
+ DESCRIPTION
+ "The status of this event entry.
+
+ If this object is not equal to valid(1), all associated
+ log entries shall be deleted by the agent."
+ ::= { eventEntry 7 }
+
+--
+logTable OBJECT-TYPE
+ SYNTAX SEQUENCE OF LogEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A list of events that have been logged."
+ ::= { event 2 }
+
+logEntry OBJECT-TYPE
+ SYNTAX LogEntry
+ MAX-ACCESS not-accessible
+ STATUS current
+ DESCRIPTION
+ "A set of data describing an event that has been
+ logged. For example, an instance of the logDescription
+ object might be named logDescription.6.47"
+ INDEX { logEventIndex, logIndex }
+ ::= { logTable 1 }
+
+LogEntry ::= SEQUENCE {
+ logEventIndex Integer32,
+ logIndex Integer32,
+ logTime TimeTicks,
+ logDescription DisplayString
+}
+
+logEventIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..65535)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The event entry that generated this log
+ entry. The log identified by a particular
+ value of this index is associated with the same
+ eventEntry as identified by the same value
+ of eventIndex."
+ ::= { logEntry 1 }
+
+logIndex OBJECT-TYPE
+ SYNTAX Integer32 (1..2147483647)
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An index that uniquely identifies an entry
+ in the log table amongst those generated by the
+ same eventEntries. These indexes are
+ assigned beginning with 1 and increase by one
+ with each new log entry. The association
+ between values of logIndex and logEntries
+ is fixed for the lifetime of each logEntry.
+ The agent may choose to delete the oldest
+ instances of logEntry as required because of
+ lack of memory. It is an implementation-specific
+ matter as to when this deletion may occur."
+ ::= { logEntry 2 }
+
+logTime OBJECT-TYPE
+ SYNTAX TimeTicks
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "The value of sysUpTime when this log entry was created."
+ ::= { logEntry 3 }
+
+logDescription OBJECT-TYPE
+ SYNTAX DisplayString (SIZE (0..255))
+ MAX-ACCESS read-only
+ STATUS current
+ DESCRIPTION
+ "An implementation dependent description of the
+ event that activated this log entry."
+ ::= { logEntry 4 }
+
+-- Remote Network Monitoring Traps
+
+rmonEventsV2 OBJECT-IDENTITY
+ STATUS current
+ DESCRIPTION "Definition point for RMON notifications."
+ ::= { rmon 0 }
+
+risingAlarm NOTIFICATION-TYPE
+ OBJECTS { alarmIndex, alarmVariable, alarmSampleType,
+ alarmValue, alarmRisingThreshold }
+ STATUS current
+ DESCRIPTION
+ "The SNMP trap that is generated when an alarm
+ entry crosses its rising threshold and generates
+ an event that is configured for sending SNMP
+ traps."
+ ::= { rmonEventsV2 1 }
+
+fallingAlarm NOTIFICATION-TYPE
+ OBJECTS { alarmIndex, alarmVariable, alarmSampleType,
+ alarmValue, alarmFallingThreshold }
+ STATUS current
+ DESCRIPTION
+ "The SNMP trap that is generated when an alarm
+ entry crosses its falling threshold and generates
+ an event that is configured for sending SNMP
+ traps."
+ ::= { rmonEventsV2 2 }
+
+-- Conformance information
+
+rmonCompliances OBJECT IDENTIFIER ::= { rmonConformance 9 }
+rmonGroups OBJECT IDENTIFIER ::= { rmonConformance 10 }
+
+-- Compliance Statements
+rmonCompliance MODULE-COMPLIANCE
+ STATUS current
+ DESCRIPTION
+ "The requirements for conformance to the RMON MIB. At least
+ one of the groups in this module must be implemented to
+ conform to the RMON MIB. Implementations of this MIB
+ must also implement the system group of MIB-II [16] and the
+ IF-MIB [17]."
+ MODULE -- this module
+
+ GROUP rmonEtherStatsGroup
+ DESCRIPTION
+ "The RMON Ethernet Statistics Group is optional."
+
+ GROUP rmonHistoryControlGroup
+ DESCRIPTION
+ "The RMON History Control Group is optional."
+
+ GROUP rmonEthernetHistoryGroup
+ DESCRIPTION
+ "The RMON Ethernet History Group is optional."
+
+ GROUP rmonAlarmGroup
+ DESCRIPTION
+ "The RMON Alarm Group is optional."
+
+ GROUP rmonHostGroup
+ DESCRIPTION
+ "The RMON Host Group is mandatory when the
+ rmonHostTopNGroup is implemented."
+
+ GROUP rmonHostTopNGroup
+ DESCRIPTION
+ "The RMON Host Top N Group is optional."
+
+ GROUP rmonMatrixGroup
+ DESCRIPTION
+ "The RMON Matrix Group is optional."
+
+ GROUP rmonFilterGroup
+ DESCRIPTION
+ "The RMON Filter Group is mandatory when the
+ rmonPacketCaptureGroup is implemented."
+
+ GROUP rmonPacketCaptureGroup
+ DESCRIPTION
+ "The RMON Packet Capture Group is optional."
+
+ GROUP rmonEventGroup
+ DESCRIPTION
+ "The RMON Event Group is mandatory when the
+ rmonAlarmGroup is implemented."
+ ::= { rmonCompliances 1 }
+
+ rmonEtherStatsGroup OBJECT-GROUP
+ OBJECTS {
+ etherStatsIndex, etherStatsDataSource,
+ etherStatsDropEvents, etherStatsOctets, etherStatsPkts,
+ etherStatsBroadcastPkts, etherStatsMulticastPkts,
+ etherStatsCRCAlignErrors, etherStatsUndersizePkts,
+ etherStatsOversizePkts, etherStatsFragments,
+ etherStatsJabbers, etherStatsCollisions,
+ etherStatsPkts64Octets, etherStatsPkts65to127Octets,
+ etherStatsPkts128to255Octets,
+ etherStatsPkts256to511Octets,
+ etherStatsPkts512to1023Octets,
+ etherStatsPkts1024to1518Octets,
+ etherStatsOwner, etherStatsStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "The RMON Ethernet Statistics Group."
+ ::= { rmonGroups 1 }
+
+ rmonHistoryControlGroup OBJECT-GROUP
+ OBJECTS {
+ historyControlIndex, historyControlDataSource,
+ historyControlBucketsRequested,
+ historyControlBucketsGranted, historyControlInterval,
+ historyControlOwner, historyControlStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "The RMON History Control Group."
+ ::= { rmonGroups 2 }
+
+ rmonEthernetHistoryGroup OBJECT-GROUP
+ OBJECTS {
+ etherHistoryIndex, etherHistorySampleIndex,
+ etherHistoryIntervalStart, etherHistoryDropEvents,
+ etherHistoryOctets, etherHistoryPkts,
+ etherHistoryBroadcastPkts, etherHistoryMulticastPkts,
+ etherHistoryCRCAlignErrors, etherHistoryUndersizePkts,
+ etherHistoryOversizePkts, etherHistoryFragments,
+ etherHistoryJabbers, etherHistoryCollisions,
+ etherHistoryUtilization
+ }
+ STATUS current
+ DESCRIPTION
+ "The RMON Ethernet History Group."
+ ::= { rmonGroups 3 }
+
+ rmonAlarmGroup OBJECT-GROUP
+ OBJECTS {
+ alarmIndex, alarmInterval, alarmVariable,
+ alarmSampleType, alarmValue, alarmStartupAlarm,
+ alarmRisingThreshold, alarmFallingThreshold,
+ alarmRisingEventIndex, alarmFallingEventIndex,
+ alarmOwner, alarmStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "The RMON Alarm Group."
+ ::= { rmonGroups 4 }
+
+ rmonHostGroup OBJECT-GROUP
+ OBJECTS {
+ hostControlIndex, hostControlDataSource,
+ hostControlTableSize, hostControlLastDeleteTime,
+ hostControlOwner, hostControlStatus,
+ hostAddress, hostCreationOrder, hostIndex,
+ hostInPkts, hostOutPkts, hostInOctets,
+ hostOutOctets, hostOutErrors, hostOutBroadcastPkts,
+ hostOutMulticastPkts, hostTimeAddress,
+ hostTimeCreationOrder, hostTimeIndex,
+ hostTimeInPkts, hostTimeOutPkts, hostTimeInOctets,
+ hostTimeOutOctets, hostTimeOutErrors,
+ hostTimeOutBroadcastPkts, hostTimeOutMulticastPkts
+ }
+ STATUS current
+ DESCRIPTION
+ "The RMON Host Group."
+ ::= { rmonGroups 5 }
+
+ rmonHostTopNGroup OBJECT-GROUP
+ OBJECTS {
+ hostTopNControlIndex, hostTopNHostIndex,
+ hostTopNRateBase, hostTopNTimeRemaining,
+ hostTopNDuration, hostTopNRequestedSize,
+ hostTopNGrantedSize, hostTopNStartTime,
+ hostTopNOwner, hostTopNStatus,
+ hostTopNReport, hostTopNIndex,
+ hostTopNAddress, hostTopNRate
+ }
+ STATUS current
+ DESCRIPTION
+ "The RMON Host Top 'N' Group."
+ ::= { rmonGroups 6 }
+
+ rmonMatrixGroup OBJECT-GROUP
+ OBJECTS {
+ matrixControlIndex, matrixControlDataSource,
+ matrixControlTableSize, matrixControlLastDeleteTime,
+ matrixControlOwner, matrixControlStatus,
+ matrixSDSourceAddress, matrixSDDestAddress,
+ matrixSDIndex, matrixSDPkts,
+ matrixSDOctets, matrixSDErrors,
+ matrixDSSourceAddress, matrixDSDestAddress,
+ matrixDSIndex, matrixDSPkts,
+ matrixDSOctets, matrixDSErrors
+ }
+ STATUS current
+ DESCRIPTION
+ "The RMON Matrix Group."
+ ::= { rmonGroups 7 }
+
+ rmonFilterGroup OBJECT-GROUP
+ OBJECTS {
+ filterIndex, filterChannelIndex, filterPktDataOffset,
+ filterPktData, filterPktDataMask,
+ filterPktDataNotMask, filterPktStatus,
+ filterPktStatusMask, filterPktStatusNotMask,
+ filterOwner, filterStatus,
+ channelIndex, channelIfIndex, channelAcceptType,
+ channelDataControl, channelTurnOnEventIndex,
+ channelTurnOffEventIndex, channelEventIndex,
+ channelEventStatus, channelMatches,
+ channelDescription, channelOwner, channelStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "The RMON Filter Group."
+ ::= { rmonGroups 8 }
+
+ rmonPacketCaptureGroup OBJECT-GROUP
+ OBJECTS {
+ bufferControlIndex, bufferControlChannelIndex,
+ bufferControlFullStatus, bufferControlFullAction,
+ bufferControlCaptureSliceSize,
+ bufferControlDownloadSliceSize,
+ bufferControlDownloadOffset,
+ bufferControlMaxOctetsRequested,
+ bufferControlMaxOctetsGranted,
+ bufferControlCapturedPackets,
+ bufferControlTurnOnTime,
+ bufferControlOwner, bufferControlStatus,
+ captureBufferControlIndex, captureBufferIndex,
+ captureBufferPacketID, captureBufferPacketData,
+ captureBufferPacketLength, captureBufferPacketTime,
+ captureBufferPacketStatus
+ }
+ STATUS current
+ DESCRIPTION
+ "The RMON Packet Capture Group."
+ ::= { rmonGroups 9 }
+
+ rmonEventGroup OBJECT-GROUP
+ OBJECTS {
+ eventIndex, eventDescription, eventType,
+ eventCommunity, eventLastTimeSent,
+ eventOwner, eventStatus,
+ logEventIndex, logIndex, logTime,
+ logDescription
+ }
+ STATUS current
+ DESCRIPTION
+ "The RMON Event Group."
+ ::= { rmonGroups 10 }
+
+ rmonNotificationGroup NOTIFICATION-GROUP
+ NOTIFICATIONS { risingAlarm, fallingAlarm }
+ STATUS current
+ DESCRIPTION
+ "The RMON Notification Group."
+ ::= { rmonGroups 11 }
+END
diff --git a/lib/snmp/vsn.mk b/lib/snmp/vsn.mk
index fb1dcb6c41..36b9764bc8 100644
--- a/lib/snmp/vsn.mk
+++ b/lib/snmp/vsn.mk
@@ -18,6 +18,6 @@
# %CopyrightEnd%
APPLICATION = snmp
-SNMP_VSN = 4.21.7
+SNMP_VSN = 4.22
PRE_VSN =
APP_VSN = "$(APPLICATION)-$(SNMP_VSN)$(PRE_VSN)"