diff options
Diffstat (limited to 'lib/ssh/doc/src/configure_algos.xml')
| -rw-r--r-- | lib/ssh/doc/src/configure_algos.xml | 457 |
1 files changed, 457 insertions, 0 deletions
diff --git a/lib/ssh/doc/src/configure_algos.xml b/lib/ssh/doc/src/configure_algos.xml new file mode 100644 index 0000000000..ebd128c097 --- /dev/null +++ b/lib/ssh/doc/src/configure_algos.xml @@ -0,0 +1,457 @@ +<?xml version="1.0" encoding="utf-8" ?> +<!DOCTYPE chapter SYSTEM "chapter.dtd"> + +<chapter> + <header> + <copyright> + <year>2017</year> + <year>2017</year> + <holder>Ericsson AB. All Rights Reserved.</holder> + </copyright> + <legalnotice> + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. + + </legalnotice> + + <title>Configuring algorithms in SSH</title> + <prepared></prepared> + <docno></docno> + <approved></approved> + <date></date> + <rev></rev> + <file>configure_algos.xml</file> + </header> + + <section> + <marker id="introduction"/> + <title>Introduction</title> + <p>To fully understand how to configure the algorithms, we must understand partly both how the ssh protocol + works and how the OTP SSH app handles the corresponding items</p> + + <p>The first subsection will give a short background about the ssh protocol while later sections describes + the implementation and provides many examples</p> + + <section> + <title>Basics of the ssh protocol's algorithms handling</title> + + <p>SSH uses different sets of algorithms in different phases of a session. Which + algorithms to use is negotiated by the client and the server at the beginning of a session. + See <url href="https://tools.ietf.org/html/rfc4253">RFC 4253</url>, + "The Secure Shell (SSH) Transport Layer Protocol" for details. + </p> + + <p>The negotiation is simple: both peers sends their list of supported alghorithms to the other part. + The first algorithm on the client's list that also in on the server's list is selected. So it is the + client's orderering of the list that gives the priority for the algorithms.</p> + + <p>There are five lists exchanged in the connection setup. Three of them are also divided in two + directions, to and from the server.</p> + + <p>The lists are (named as in the SSH application's options):</p> + <taglist> + <tag><c>kex</c></tag> + <item> + <p>Key exchange.</p> + <p>An algorithm is selected for computing a secret encryption key. Among examples are: + the old nowadays week <c>'diffie-hellman-group-exchange-sha1'</c> and the very strong and modern + <c>'ecdh-sha2-nistp512'</c>.</p> + </item> + + <tag><c>public_key</c></tag> + <item> + <p>Server host key</p> + <p>The asymetric encryption algorithm used in the server's private-public host key pair. + Examples include the well-known RSA <c>'ssh-rsa'</c> and elliptic curve <c>'ecdsa-sha2-nistp521'</c>. + </p> + </item> + + <tag><c>cipher</c></tag> + <item> + <p>Symetric cipher algorithm used for the message encryption. This algorithm will use the key calculated + in the kex phase (together with other info) to genereate the actual key used. Examples are + tripple-DES <c>'3des-cbc'</c> and one of many AES variants <c>'aes192-ctr'</c>. + </p> + <p>This list is actually two - one for each direction server-to-client and client-to-server. Therefore it + is possible but rare to have different algorithms in the two directions in one connection.</p> + </item> + + <tag><c>mac</c></tag> + <item> + <p>Message authentication code</p> + <p>"Check sum" of each message sent between the peers. Examples are SHA <c>'hmac-sha1'</c> and + SHA2 <c>'hmac-sha2-512'</c>.</p> + <p>This list is also divided into two for the both directions</p> + </item> + + <tag><c>compression</c></tag> + <item> + <p>If and how to compress the message. Examples are <c>none</c>, that is, no compression and + <c>zlib</c>.</p> + <p>This list is also divided into two for the both directions</p> + </item> + + </taglist> + </section> + + <section> + <title>The SSH app's mechanism</title> + <p>The set of algorithms that the SSH app uses by default depends on the algoritms supported by the:</p> + <list> + <item><p><seealso marker="crypto:crypto">crypto</seealso> app,</p> + </item> + <item><p>The cryptolib OTP is linked with, usally the one the OS uses, probably OpenSSL,</p> + </item> + <item><p>and finaly what the SSH app implements</p> + </item> + </list> + <p>Due to this, it impossible to list in documentation what algorithms that are available in a certain installation.</p> + <p>There is an important commands to list the actual algorithms and their ordering: + <seealso marker="ssh#default_algorithms-0">ssh:default_algorithms/0</seealso>.</p> + <code type="erl"> +0> ssh:default_algorithms(). +[{kex,['ecdh-sha2-nistp384','ecdh-sha2-nistp521', + 'ecdh-sha2-nistp256','diffie-hellman-group-exchange-sha256', + 'diffie-hellman-group16-sha512', + 'diffie-hellman-group18-sha512', + 'diffie-hellman-group14-sha256', + 'diffie-hellman-group14-sha1', + 'diffie-hellman-group-exchange-sha1']}, + {public_key,['ecdsa-sha2-nistp384','ecdsa-sha2-nistp521', + 'ecdsa-sha2-nistp256','ssh-rsa','rsa-sha2-256', + 'rsa-sha2-512','ssh-dss']}, + {cipher,[{client2server,['[email protected]', + 'aes256-ctr','aes192-ctr','[email protected]', + 'aes128-ctr','aes128-cbc','3des-cbc']}, + {server2client,['[email protected]','aes256-ctr', + 'aes192-ctr','[email protected]','aes128-ctr', + 'aes128-cbc','3des-cbc']}]}, + {mac,[{client2server,['hmac-sha2-256','hmac-sha2-512', + 'hmac-sha1']}, + {server2client,['hmac-sha2-256','hmac-sha2-512', + 'hmac-sha1']}]}, + {compression,[{client2server,[none,'[email protected]',zlib]}, + {server2client,[none,'[email protected]',zlib]}]}] + + </code> + <p>To change this listing, there are two options which can be used in + <seealso marker="ssh#connect-3">ssh:default_algorithms/2,3,4</seealso> + and + <seealso marker="ssh#daemon-2">ssh:daemon/2,3</seealso>. The options could of course + be used in all other functions that initiates connections.</p> + + <p>The options are <c>preferred_algorithms</c> and <c>modify_algorithms</c>. The first one + replaces the default set, while the latter modifies the default set.</p> + </section> + </section> + + <section> + <title>Replacing the default set: preferred_algorithms</title> + <p>See the <seealso marker="ssh#option_preferred_algorithms">Reference Manual</seealso> for details</p> + + <p>Here follows a series of examples ranging from simple to more complex.</p> + + <p>The experimental function <c>ssh:chk_algos_opts(Opts)</c> mangles the options <c>preferred_algorithms</c> + and <c>modify_algorithms</c> as <c>ssh:dameon</c>, <c>ssh:connect</c> and others does.</p> + + <section> + <title>Example 1</title> + <p>Replace the kex algorithms list with the single algorithm <c>'diffie-hellman-group14-sha256'</c>:</p> + <code> +1> ssh:chk_algos_opts( + [{preferred_algorithms, + [{kex, ['diffie-hellman-group14-sha256']} + ] + } + ]). +[{kex,['diffie-hellman-group14-sha256']}, + {public_key,['ecdsa-sha2-nistp384','ecdsa-sha2-nistp521', + 'ecdsa-sha2-nistp256','ssh-rsa','rsa-sha2-256', + 'rsa-sha2-512','ssh-dss']}, + {cipher,[{client2server,['[email protected]', + 'aes256-ctr','aes192-ctr','[email protected]', + 'aes128-ctr','aes128-cbc','3des-cbc']}, + {server2client,['[email protected]','aes256-ctr', + 'aes192-ctr','[email protected]','aes128-ctr', + 'aes128-cbc','3des-cbc']}]}, + {mac,[{client2server,['hmac-sha2-256','hmac-sha2-512', + 'hmac-sha1']}, + {server2client,['hmac-sha2-256','hmac-sha2-512', + 'hmac-sha1']}]}, + {compression,[{client2server,[none,'[email protected]',zlib]}, + {server2client,[none,'[email protected]',zlib]}]}] + </code> + <p>Note that the unmentioned lists (<c>public_key</c>, <c>cipher</c>, <c>mac</c> and <c>compression</c>) + are un-changed.</p> + </section> + + <section> + <title>Example 2</title> + <p>In the lists that are divided in two for the two directions (c.f <c>cipher</c>) it is possible + to change both directions at once:</p> + <code> +2> ssh:chk_algos_opts( + [{preferred_algorithms, + [{cipher,['aes128-ctr']} + ] + } + ]). +[{kex,['ecdh-sha2-nistp384','ecdh-sha2-nistp521', + 'ecdh-sha2-nistp256','diffie-hellman-group-exchange-sha256', + 'diffie-hellman-group16-sha512', + 'diffie-hellman-group18-sha512', + 'diffie-hellman-group14-sha256', + 'diffie-hellman-group14-sha1', + 'diffie-hellman-group-exchange-sha1']}, + {public_key,['ecdsa-sha2-nistp384','ecdsa-sha2-nistp521', + 'ecdsa-sha2-nistp256','ssh-rsa','rsa-sha2-256', + 'rsa-sha2-512','ssh-dss']}, + {cipher,[{client2server,['aes128-ctr']}, + {server2client,['aes128-ctr']}]}, + {mac,[{client2server,['hmac-sha2-256','hmac-sha2-512', + 'hmac-sha1']}, + {server2client,['hmac-sha2-256','hmac-sha2-512', + 'hmac-sha1']}]}, + {compression,[{client2server,[none,'[email protected]',zlib]}, + {server2client,[none,'[email protected]',zlib]}]}] + </code> + <p>Note that both lists in <c>cipher</c> has been changed to the provided value (<c>'aes128-ctr'</c>).</p> + </section> + + <section> + <title>Example 3</title> + <p>In the lists that are divided in two for the two directions (c.f <c>cipher</c>) it is possible + to change only one of the directions:</p> + <code> +3> ssh:chk_algos_opts( + [{preferred_algorithms, + [{cipher,[{client2server,['aes128-ctr']}]} + ] + } + ]). +[{kex,['ecdh-sha2-nistp384','ecdh-sha2-nistp521', + 'ecdh-sha2-nistp256','diffie-hellman-group-exchange-sha256', + 'diffie-hellman-group16-sha512', + 'diffie-hellman-group18-sha512', + 'diffie-hellman-group14-sha256', + 'diffie-hellman-group14-sha1', + 'diffie-hellman-group-exchange-sha1']}, + {public_key,['ecdsa-sha2-nistp384','ecdsa-sha2-nistp521', + 'ecdsa-sha2-nistp256','ssh-rsa','rsa-sha2-256', + 'rsa-sha2-512','ssh-dss']}, + {cipher,[{client2server,['aes128-ctr']}, + {server2client,['[email protected]','aes256-ctr', + 'aes192-ctr','[email protected]','aes128-ctr', + 'aes128-cbc','3des-cbc']}]}, + {mac,[{client2server,['hmac-sha2-256','hmac-sha2-512', + 'hmac-sha1']}, + {server2client,['hmac-sha2-256','hmac-sha2-512', + 'hmac-sha1']}]}, + {compression,[{client2server,[none,'[email protected]',zlib]}, + {server2client,[none,'[email protected]',zlib]}]}] + </code> + </section> + + <section> + <title>Example 4</title> + <p>It is of course possible to change more than one list:</p> + <code> +4> ssh:chk_algos_opts( + [{preferred_algorithms, + [{cipher,['aes128-ctr']}, + {mac,['hmac-sha2-256']}, + {kex,['ecdh-sha2-nistp384']}, + {public_key,['ssh-rsa']}, + {compression,[{server2client,[none]}, + {client2server,[zlib]}]} + ] + } + ]). +[{kex,['ecdh-sha2-nistp384']}, + {public_key,['ssh-rsa']}, + {cipher,[{client2server,['aes128-ctr']}, + {server2client,['aes128-ctr']}]}, + {mac,[{client2server,['hmac-sha2-256']}, + {server2client,['hmac-sha2-256']}]}, + {compression,[{client2server,[zlib]}, + {server2client,[none]}]}] + + </code> + <p>Note that the ordering of the tuples in the lists didn't matter.</p> + </section> + </section> + + <section> + <title>Modifying the default set: modify_algorithms</title> + <p>The option <c>preferred_algorithms</c> is complicated to use for adding or removing single algorithms. One has + to first list them with <c>ssh:default_algorithms()</c> and then do substitutions in the lists. A situation + when it might be useful to add an algorithm is when one need to use a supported but disabled one. An example + is the kex <c>'diffie-hellman-group1-sha1'</c> which nowadays is very unsecure and therefore disabled. It is + however still supported and might be used.</p> + + <p>To facilitate addition or removal of algorithms the option <c>modify_algorithms</c> is available. + See the <seealso marker="ssh#option_modify_algorithms">Reference Manual</seealso> for details.</p> + + <p>The option takes a list with instructions to append, prepend or remove algorithms:</p> + <code type="erl"> +{modify_algorithms, [{append, ...}, + {prepend, ...}, + {rm, ...} + ]} + </code> + <p>Each of the <c>...</c> can be a <c>algs_list()</c> as the argument to the <c>preferred_algorithms</c> option.</p> + <section> + <title>Example 5</title> + <p>As an example let's add the Diffie-Hellman Group1 first in the kex list. It is supported according to + <seealso marker="SSH_app#supported_algos">Supported algoritms</seealso>.</p> + <code type="erl"> +5> ssh:chk_algos_opts( + [{modify_algorithms, + [{prepend, + [{kex,['diffie-hellman-group1-sha1']}] + } + ] + } + ]). +[{kex,['diffie-hellman-group1-sha1','ecdh-sha2-nistp384', + 'ecdh-sha2-nistp521','ecdh-sha2-nistp256', + 'diffie-hellman-group-exchange-sha256', + 'diffie-hellman-group16-sha512', + 'diffie-hellman-group18-sha512', + 'diffie-hellman-group14-sha256', + 'diffie-hellman-group14-sha1', + 'diffie-hellman-group-exchange-sha1']}, + {public_key,['ecdsa-sha2-nistp384','ecdsa-sha2-nistp521', + 'ecdsa-sha2-nistp256','ssh-rsa','rsa-sha2-256', + 'rsa-sha2-512','ssh-dss']}, + {cipher,[{client2server,['[email protected]', + 'aes256-ctr','aes192-ctr','[email protected]', + 'aes128-ctr','aes128-cbc','3des-cbc']}, + {server2client,['[email protected]','aes256-ctr', + 'aes192-ctr','[email protected]','aes128-ctr', + 'aes128-cbc','3des-cbc']}]}, + {mac,[{client2server,['hmac-sha2-256','hmac-sha2-512', + 'hmac-sha1']}, + {server2client,['hmac-sha2-256','hmac-sha2-512', + 'hmac-sha1']}]}, + {compression,[{client2server,[none,'[email protected]',zlib]}, + {server2client,[none,'[email protected]',zlib]}]}] + + </code> + <p>And the result shows that the Diffie-Hellman Group1 is added at the head of the kex list</p> + </section> + + <section> + <title>Example 6</title> + <p>In next example, we also move the <c>'ecdh-sha2-nistp521'</c> to the end in the kex + list, that is, <c>append</c>.</p> + <code type="erl"> +6> ssh:chk_algos_opts( + [{modify_algorithms, + [{prepend, + [{kex, ['diffie-hellman-group1-sha1']} + ]}, + {append, + [{kex, ['ecdh-sha2-nistp521']} + ]} + ] + } + ]). +[{kex,['diffie-hellman-group1-sha1','ecdh-sha2-nistp384', + 'ecdh-sha2-nistp256','diffie-hellman-group-exchange-sha256', + 'diffie-hellman-group16-sha512', + 'diffie-hellman-group18-sha512', + 'diffie-hellman-group14-sha256', + 'diffie-hellman-group14-sha1', + 'diffie-hellman-group-exchange-sha1','ecdh-sha2-nistp521']}, + {public_key,['ecdsa-sha2-nistp384','ecdsa-sha2-nistp521', + ..... +] + </code> + <p>Note that the appended algorithm is removed from its original place and then appended.</p> + </section> + + <section> + <title>Example 7</title> + <p>In next example, we also move the <c>'ecdh-sha2-nistp521'</c> to the end in the kex + list, that is, <c>append</c>.</p> + <code type="erl"> +7> ssh:chk_algos_opts( + [{modify_algorithms, + [{prepend, + [{kex, ['diffie-hellman-group1-sha1']} + ]}, + {append, + [{kex, ['ecdh-sha2-nistp521']} + ]} + ] + } + ]). +[{kex,['diffie-hellman-group1-sha1','ecdh-sha2-nistp384', + 'ecdh-sha2-nistp256','diffie-hellman-group-exchange-sha256', + 'diffie-hellman-group16-sha512', + 'diffie-hellman-group18-sha512', + 'diffie-hellman-group14-sha256', + 'diffie-hellman-group14-sha1', + 'diffie-hellman-group-exchange-sha1','ecdh-sha2-nistp521']}, + {public_key,['ecdsa-sha2-nistp384','ecdsa-sha2-nistp521', + ..... +] + </code> + <p>Note that the appended algorithm first is removed from its original place and then appended.</p> + </section> + + + <section> + <title>Example 8</title> + <p>In this example, we use both options (<c>preferred_algorithms</c> and <c>modify_algorithms</c>) and + also try to prepend an unsupported algorithm. Any unsupported algorithm is quietly removed.</p> + <code type="erl"> +8> ssh:chk_algos_opts( + [{preferred_algorithms, + [{cipher,['aes128-ctr']}, + {mac,['hmac-sha2-256']}, + {kex,['ecdh-sha2-nistp384']}, + {public_key,['ssh-rsa']}, + {compression,[{server2client,[none]}, + {client2server,[zlib]}]} + ] + }, + {modify_algorithms, + [{prepend, + [{kex, ['some unsupported algorithm']} + ]}, + {append, + [{kex, ['diffie-hellman-group1-sha1']} + ]} + ] + } + ]). +[{kex,['ecdh-sha2-nistp384','diffie-hellman-group1-sha1']}, + {public_key,['ssh-rsa']}, + {cipher,[{client2server,['aes128-ctr']}, + {server2client,['aes128-ctr']}]}, + {mac,[{client2server,['hmac-sha2-256']}, + {server2client,['hmac-sha2-256']}]}, + {compression,[{client2server,[zlib]}, + {server2client,[none]}]}] + + </code> + <p>It is of course questionable why anyone would like to use the both options together, but it is possible + if the needed.</p> + </section> + + + + </section> + +</chapter> |