diff options
Diffstat (limited to 'lib/ssh/doc/src')
| -rw-r--r-- | lib/ssh/doc/src/Makefile | 3 | ||||
| -rw-r--r-- | lib/ssh/doc/src/configure_algos.xml | 457 | ||||
| -rw-r--r-- | lib/ssh/doc/src/ssh.xml | 80 | ||||
| -rw-r--r-- | lib/ssh/doc/src/ssh_app.xml | 4 | ||||
| -rw-r--r-- | lib/ssh/doc/src/usersguide.xml | 1 |
5 files changed, 541 insertions, 4 deletions
diff --git a/lib/ssh/doc/src/Makefile b/lib/ssh/doc/src/Makefile index a759854da4..adbda5a030 100644 --- a/lib/ssh/doc/src/Makefile +++ b/lib/ssh/doc/src/Makefile @@ -53,7 +53,8 @@ XML_PART_FILES = part_notes.xml \ XML_CHAPTER_FILES = notes.xml \ introduction.xml \ ssh_protocol.xml \ - using_ssh.xml + using_ssh.xml \ + configure_algos.xml BOOK_FILES = book.xml diff --git a/lib/ssh/doc/src/configure_algos.xml b/lib/ssh/doc/src/configure_algos.xml new file mode 100644 index 0000000000..ebd128c097 --- /dev/null +++ b/lib/ssh/doc/src/configure_algos.xml @@ -0,0 +1,457 @@ +<?xml version="1.0" encoding="utf-8" ?> +<!DOCTYPE chapter SYSTEM "chapter.dtd"> + +<chapter> + <header> + <copyright> + <year>2017</year> + <year>2017</year> + <holder>Ericsson AB. All Rights Reserved.</holder> + </copyright> + <legalnotice> + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. + + </legalnotice> + + <title>Configuring algorithms in SSH</title> + <prepared></prepared> + <docno></docno> + <approved></approved> + <date></date> + <rev></rev> + <file>configure_algos.xml</file> + </header> + + <section> + <marker id="introduction"/> + <title>Introduction</title> + <p>To fully understand how to configure the algorithms, we must understand partly both how the ssh protocol + works and how the OTP SSH app handles the corresponding items</p> + + <p>The first subsection will give a short background about the ssh protocol while later sections describes + the implementation and provides many examples</p> + + <section> + <title>Basics of the ssh protocol's algorithms handling</title> + + <p>SSH uses different sets of algorithms in different phases of a session. Which + algorithms to use is negotiated by the client and the server at the beginning of a session. + See <url href="https://tools.ietf.org/html/rfc4253">RFC 4253</url>, + "The Secure Shell (SSH) Transport Layer Protocol" for details. + </p> + + <p>The negotiation is simple: both peers sends their list of supported alghorithms to the other part. + The first algorithm on the client's list that also in on the server's list is selected. So it is the + client's orderering of the list that gives the priority for the algorithms.</p> + + <p>There are five lists exchanged in the connection setup. Three of them are also divided in two + directions, to and from the server.</p> + + <p>The lists are (named as in the SSH application's options):</p> + <taglist> + <tag><c>kex</c></tag> + <item> + <p>Key exchange.</p> + <p>An algorithm is selected for computing a secret encryption key. Among examples are: + the old nowadays week <c>'diffie-hellman-group-exchange-sha1'</c> and the very strong and modern + <c>'ecdh-sha2-nistp512'</c>.</p> + </item> + + <tag><c>public_key</c></tag> + <item> + <p>Server host key</p> + <p>The asymetric encryption algorithm used in the server's private-public host key pair. + Examples include the well-known RSA <c>'ssh-rsa'</c> and elliptic curve <c>'ecdsa-sha2-nistp521'</c>. + </p> + </item> + + <tag><c>cipher</c></tag> + <item> + <p>Symetric cipher algorithm used for the message encryption. This algorithm will use the key calculated + in the kex phase (together with other info) to genereate the actual key used. Examples are + tripple-DES <c>'3des-cbc'</c> and one of many AES variants <c>'aes192-ctr'</c>. + </p> + <p>This list is actually two - one for each direction server-to-client and client-to-server. Therefore it + is possible but rare to have different algorithms in the two directions in one connection.</p> + </item> + + <tag><c>mac</c></tag> + <item> + <p>Message authentication code</p> + <p>"Check sum" of each message sent between the peers. Examples are SHA <c>'hmac-sha1'</c> and + SHA2 <c>'hmac-sha2-512'</c>.</p> + <p>This list is also divided into two for the both directions</p> + </item> + + <tag><c>compression</c></tag> + <item> + <p>If and how to compress the message. Examples are <c>none</c>, that is, no compression and + <c>zlib</c>.</p> + <p>This list is also divided into two for the both directions</p> + </item> + + </taglist> + </section> + + <section> + <title>The SSH app's mechanism</title> + <p>The set of algorithms that the SSH app uses by default depends on the algoritms supported by the:</p> + <list> + <item><p><seealso marker="crypto:crypto">crypto</seealso> app,</p> + </item> + <item><p>The cryptolib OTP is linked with, usally the one the OS uses, probably OpenSSL,</p> + </item> + <item><p>and finaly what the SSH app implements</p> + </item> + </list> + <p>Due to this, it impossible to list in documentation what algorithms that are available in a certain installation.</p> + <p>There is an important commands to list the actual algorithms and their ordering: + <seealso marker="ssh#default_algorithms-0">ssh:default_algorithms/0</seealso>.</p> + <code type="erl"> +0> ssh:default_algorithms(). +[{kex,['ecdh-sha2-nistp384','ecdh-sha2-nistp521', + 'ecdh-sha2-nistp256','diffie-hellman-group-exchange-sha256', + 'diffie-hellman-group16-sha512', + 'diffie-hellman-group18-sha512', + 'diffie-hellman-group14-sha256', + 'diffie-hellman-group14-sha1', + 'diffie-hellman-group-exchange-sha1']}, + {public_key,['ecdsa-sha2-nistp384','ecdsa-sha2-nistp521', + 'ecdsa-sha2-nistp256','ssh-rsa','rsa-sha2-256', + 'rsa-sha2-512','ssh-dss']}, + {cipher,[{client2server,['[email protected]', + 'aes256-ctr','aes192-ctr','[email protected]', + 'aes128-ctr','aes128-cbc','3des-cbc']}, + {server2client,['[email protected]','aes256-ctr', + 'aes192-ctr','[email protected]','aes128-ctr', + 'aes128-cbc','3des-cbc']}]}, + {mac,[{client2server,['hmac-sha2-256','hmac-sha2-512', + 'hmac-sha1']}, + {server2client,['hmac-sha2-256','hmac-sha2-512', + 'hmac-sha1']}]}, + {compression,[{client2server,[none,'[email protected]',zlib]}, + {server2client,[none,'[email protected]',zlib]}]}] + + </code> + <p>To change this listing, there are two options which can be used in + <seealso marker="ssh#connect-3">ssh:default_algorithms/2,3,4</seealso> + and + <seealso marker="ssh#daemon-2">ssh:daemon/2,3</seealso>. The options could of course + be used in all other functions that initiates connections.</p> + + <p>The options are <c>preferred_algorithms</c> and <c>modify_algorithms</c>. The first one + replaces the default set, while the latter modifies the default set.</p> + </section> + </section> + + <section> + <title>Replacing the default set: preferred_algorithms</title> + <p>See the <seealso marker="ssh#option_preferred_algorithms">Reference Manual</seealso> for details</p> + + <p>Here follows a series of examples ranging from simple to more complex.</p> + + <p>The experimental function <c>ssh:chk_algos_opts(Opts)</c> mangles the options <c>preferred_algorithms</c> + and <c>modify_algorithms</c> as <c>ssh:dameon</c>, <c>ssh:connect</c> and others does.</p> + + <section> + <title>Example 1</title> + <p>Replace the kex algorithms list with the single algorithm <c>'diffie-hellman-group14-sha256'</c>:</p> + <code> +1> ssh:chk_algos_opts( + [{preferred_algorithms, + [{kex, ['diffie-hellman-group14-sha256']} + ] + } + ]). +[{kex,['diffie-hellman-group14-sha256']}, + {public_key,['ecdsa-sha2-nistp384','ecdsa-sha2-nistp521', + 'ecdsa-sha2-nistp256','ssh-rsa','rsa-sha2-256', + 'rsa-sha2-512','ssh-dss']}, + {cipher,[{client2server,['[email protected]', + 'aes256-ctr','aes192-ctr','[email protected]', + 'aes128-ctr','aes128-cbc','3des-cbc']}, + {server2client,['[email protected]','aes256-ctr', + 'aes192-ctr','[email protected]','aes128-ctr', + 'aes128-cbc','3des-cbc']}]}, + {mac,[{client2server,['hmac-sha2-256','hmac-sha2-512', + 'hmac-sha1']}, + {server2client,['hmac-sha2-256','hmac-sha2-512', + 'hmac-sha1']}]}, + {compression,[{client2server,[none,'[email protected]',zlib]}, + {server2client,[none,'[email protected]',zlib]}]}] + </code> + <p>Note that the unmentioned lists (<c>public_key</c>, <c>cipher</c>, <c>mac</c> and <c>compression</c>) + are un-changed.</p> + </section> + + <section> + <title>Example 2</title> + <p>In the lists that are divided in two for the two directions (c.f <c>cipher</c>) it is possible + to change both directions at once:</p> + <code> +2> ssh:chk_algos_opts( + [{preferred_algorithms, + [{cipher,['aes128-ctr']} + ] + } + ]). +[{kex,['ecdh-sha2-nistp384','ecdh-sha2-nistp521', + 'ecdh-sha2-nistp256','diffie-hellman-group-exchange-sha256', + 'diffie-hellman-group16-sha512', + 'diffie-hellman-group18-sha512', + 'diffie-hellman-group14-sha256', + 'diffie-hellman-group14-sha1', + 'diffie-hellman-group-exchange-sha1']}, + {public_key,['ecdsa-sha2-nistp384','ecdsa-sha2-nistp521', + 'ecdsa-sha2-nistp256','ssh-rsa','rsa-sha2-256', + 'rsa-sha2-512','ssh-dss']}, + {cipher,[{client2server,['aes128-ctr']}, + {server2client,['aes128-ctr']}]}, + {mac,[{client2server,['hmac-sha2-256','hmac-sha2-512', + 'hmac-sha1']}, + {server2client,['hmac-sha2-256','hmac-sha2-512', + 'hmac-sha1']}]}, + {compression,[{client2server,[none,'[email protected]',zlib]}, + {server2client,[none,'[email protected]',zlib]}]}] + </code> + <p>Note that both lists in <c>cipher</c> has been changed to the provided value (<c>'aes128-ctr'</c>).</p> + </section> + + <section> + <title>Example 3</title> + <p>In the lists that are divided in two for the two directions (c.f <c>cipher</c>) it is possible + to change only one of the directions:</p> + <code> +3> ssh:chk_algos_opts( + [{preferred_algorithms, + [{cipher,[{client2server,['aes128-ctr']}]} + ] + } + ]). +[{kex,['ecdh-sha2-nistp384','ecdh-sha2-nistp521', + 'ecdh-sha2-nistp256','diffie-hellman-group-exchange-sha256', + 'diffie-hellman-group16-sha512', + 'diffie-hellman-group18-sha512', + 'diffie-hellman-group14-sha256', + 'diffie-hellman-group14-sha1', + 'diffie-hellman-group-exchange-sha1']}, + {public_key,['ecdsa-sha2-nistp384','ecdsa-sha2-nistp521', + 'ecdsa-sha2-nistp256','ssh-rsa','rsa-sha2-256', + 'rsa-sha2-512','ssh-dss']}, + {cipher,[{client2server,['aes128-ctr']}, + {server2client,['[email protected]','aes256-ctr', + 'aes192-ctr','[email protected]','aes128-ctr', + 'aes128-cbc','3des-cbc']}]}, + {mac,[{client2server,['hmac-sha2-256','hmac-sha2-512', + 'hmac-sha1']}, + {server2client,['hmac-sha2-256','hmac-sha2-512', + 'hmac-sha1']}]}, + {compression,[{client2server,[none,'[email protected]',zlib]}, + {server2client,[none,'[email protected]',zlib]}]}] + </code> + </section> + + <section> + <title>Example 4</title> + <p>It is of course possible to change more than one list:</p> + <code> +4> ssh:chk_algos_opts( + [{preferred_algorithms, + [{cipher,['aes128-ctr']}, + {mac,['hmac-sha2-256']}, + {kex,['ecdh-sha2-nistp384']}, + {public_key,['ssh-rsa']}, + {compression,[{server2client,[none]}, + {client2server,[zlib]}]} + ] + } + ]). +[{kex,['ecdh-sha2-nistp384']}, + {public_key,['ssh-rsa']}, + {cipher,[{client2server,['aes128-ctr']}, + {server2client,['aes128-ctr']}]}, + {mac,[{client2server,['hmac-sha2-256']}, + {server2client,['hmac-sha2-256']}]}, + {compression,[{client2server,[zlib]}, + {server2client,[none]}]}] + + </code> + <p>Note that the ordering of the tuples in the lists didn't matter.</p> + </section> + </section> + + <section> + <title>Modifying the default set: modify_algorithms</title> + <p>The option <c>preferred_algorithms</c> is complicated to use for adding or removing single algorithms. One has + to first list them with <c>ssh:default_algorithms()</c> and then do substitutions in the lists. A situation + when it might be useful to add an algorithm is when one need to use a supported but disabled one. An example + is the kex <c>'diffie-hellman-group1-sha1'</c> which nowadays is very unsecure and therefore disabled. It is + however still supported and might be used.</p> + + <p>To facilitate addition or removal of algorithms the option <c>modify_algorithms</c> is available. + See the <seealso marker="ssh#option_modify_algorithms">Reference Manual</seealso> for details.</p> + + <p>The option takes a list with instructions to append, prepend or remove algorithms:</p> + <code type="erl"> +{modify_algorithms, [{append, ...}, + {prepend, ...}, + {rm, ...} + ]} + </code> + <p>Each of the <c>...</c> can be a <c>algs_list()</c> as the argument to the <c>preferred_algorithms</c> option.</p> + <section> + <title>Example 5</title> + <p>As an example let's add the Diffie-Hellman Group1 first in the kex list. It is supported according to + <seealso marker="SSH_app#supported_algos">Supported algoritms</seealso>.</p> + <code type="erl"> +5> ssh:chk_algos_opts( + [{modify_algorithms, + [{prepend, + [{kex,['diffie-hellman-group1-sha1']}] + } + ] + } + ]). +[{kex,['diffie-hellman-group1-sha1','ecdh-sha2-nistp384', + 'ecdh-sha2-nistp521','ecdh-sha2-nistp256', + 'diffie-hellman-group-exchange-sha256', + 'diffie-hellman-group16-sha512', + 'diffie-hellman-group18-sha512', + 'diffie-hellman-group14-sha256', + 'diffie-hellman-group14-sha1', + 'diffie-hellman-group-exchange-sha1']}, + {public_key,['ecdsa-sha2-nistp384','ecdsa-sha2-nistp521', + 'ecdsa-sha2-nistp256','ssh-rsa','rsa-sha2-256', + 'rsa-sha2-512','ssh-dss']}, + {cipher,[{client2server,['[email protected]', + 'aes256-ctr','aes192-ctr','[email protected]', + 'aes128-ctr','aes128-cbc','3des-cbc']}, + {server2client,['[email protected]','aes256-ctr', + 'aes192-ctr','[email protected]','aes128-ctr', + 'aes128-cbc','3des-cbc']}]}, + {mac,[{client2server,['hmac-sha2-256','hmac-sha2-512', + 'hmac-sha1']}, + {server2client,['hmac-sha2-256','hmac-sha2-512', + 'hmac-sha1']}]}, + {compression,[{client2server,[none,'[email protected]',zlib]}, + {server2client,[none,'[email protected]',zlib]}]}] + + </code> + <p>And the result shows that the Diffie-Hellman Group1 is added at the head of the kex list</p> + </section> + + <section> + <title>Example 6</title> + <p>In next example, we also move the <c>'ecdh-sha2-nistp521'</c> to the end in the kex + list, that is, <c>append</c>.</p> + <code type="erl"> +6> ssh:chk_algos_opts( + [{modify_algorithms, + [{prepend, + [{kex, ['diffie-hellman-group1-sha1']} + ]}, + {append, + [{kex, ['ecdh-sha2-nistp521']} + ]} + ] + } + ]). +[{kex,['diffie-hellman-group1-sha1','ecdh-sha2-nistp384', + 'ecdh-sha2-nistp256','diffie-hellman-group-exchange-sha256', + 'diffie-hellman-group16-sha512', + 'diffie-hellman-group18-sha512', + 'diffie-hellman-group14-sha256', + 'diffie-hellman-group14-sha1', + 'diffie-hellman-group-exchange-sha1','ecdh-sha2-nistp521']}, + {public_key,['ecdsa-sha2-nistp384','ecdsa-sha2-nistp521', + ..... +] + </code> + <p>Note that the appended algorithm is removed from its original place and then appended.</p> + </section> + + <section> + <title>Example 7</title> + <p>In next example, we also move the <c>'ecdh-sha2-nistp521'</c> to the end in the kex + list, that is, <c>append</c>.</p> + <code type="erl"> +7> ssh:chk_algos_opts( + [{modify_algorithms, + [{prepend, + [{kex, ['diffie-hellman-group1-sha1']} + ]}, + {append, + [{kex, ['ecdh-sha2-nistp521']} + ]} + ] + } + ]). +[{kex,['diffie-hellman-group1-sha1','ecdh-sha2-nistp384', + 'ecdh-sha2-nistp256','diffie-hellman-group-exchange-sha256', + 'diffie-hellman-group16-sha512', + 'diffie-hellman-group18-sha512', + 'diffie-hellman-group14-sha256', + 'diffie-hellman-group14-sha1', + 'diffie-hellman-group-exchange-sha1','ecdh-sha2-nistp521']}, + {public_key,['ecdsa-sha2-nistp384','ecdsa-sha2-nistp521', + ..... +] + </code> + <p>Note that the appended algorithm first is removed from its original place and then appended.</p> + </section> + + + <section> + <title>Example 8</title> + <p>In this example, we use both options (<c>preferred_algorithms</c> and <c>modify_algorithms</c>) and + also try to prepend an unsupported algorithm. Any unsupported algorithm is quietly removed.</p> + <code type="erl"> +8> ssh:chk_algos_opts( + [{preferred_algorithms, + [{cipher,['aes128-ctr']}, + {mac,['hmac-sha2-256']}, + {kex,['ecdh-sha2-nistp384']}, + {public_key,['ssh-rsa']}, + {compression,[{server2client,[none]}, + {client2server,[zlib]}]} + ] + }, + {modify_algorithms, + [{prepend, + [{kex, ['some unsupported algorithm']} + ]}, + {append, + [{kex, ['diffie-hellman-group1-sha1']} + ]} + ] + } + ]). +[{kex,['ecdh-sha2-nistp384','diffie-hellman-group1-sha1']}, + {public_key,['ssh-rsa']}, + {cipher,[{client2server,['aes128-ctr']}, + {server2client,['aes128-ctr']}]}, + {mac,[{client2server,['hmac-sha2-256']}, + {server2client,['hmac-sha2-256']}]}, + {compression,[{client2server,[zlib]}, + {server2client,[none]}]}] + + </code> + <p>It is of course questionable why anyone would like to use the both options together, but it is possible + if the needed.</p> + </section> + + + + </section> + +</chapter> diff --git a/lib/ssh/doc/src/ssh.xml b/lib/ssh/doc/src/ssh.xml index ea7e975ef5..48553bf503 100644 --- a/lib/ssh/doc/src/ssh.xml +++ b/lib/ssh/doc/src/ssh.xml @@ -108,6 +108,9 @@ <tag><c>double_algs() =</c></tag> <item><p><c>[{client2serverlist,simple_algs()},{server2client,simple_algs()}] | simple_algs()</c></p></item> + + <tag><c>modify_algs_list() =</c></tag> + <item><p><c>list( {append,algs_list()} | {prepend,algs_list()} | {rm,algs_list()} )</c></p></item> </taglist> </section> @@ -254,7 +257,8 @@ </p> </item> - <tag><c><![CDATA[{preferred_algorithms, algs_list()}]]></c></tag> + <tag><marker id="option_preferred_algorithms"></marker> + <c><![CDATA[{preferred_algorithms, algs_list()}]]></c></tag> <item> <p>List of algorithms to use in the algorithm negotiation. The default <c>algs_list()</c> can be obtained from <seealso marker="#default_algorithms/0">default_algorithms/0</seealso>. @@ -275,6 +279,8 @@ for cipher but specifies the same algorithms for mac and compression in both directions. The kex (key exchange) is implicit but public_key is set explicitly.</p> + <p>For background and more examples see the <seealso marker="configure_algos#introduction">User's Guide</seealso>.</p> + <warning> <p>Changing the values can make a connection less secure. Do not change unless you know exactly what you are doing. If you do not understand the values then you @@ -282,6 +288,41 @@ </warning> </item> + <tag><marker id="option_modify_algorithms"></marker> + <c><![CDATA[{modify_algorithms, modify_algs_list()}]]></c></tag> + <item> + <p>Modifies the list of algorithms to use in the algorithm negotiation. The modifications are + applied after the option <c>preferred_algorithms</c> is applied (if existing)</p> + <p>The possible modifications are to:</p> + <list> + <item><p>Append or prepend supported but not enabled algorithm(s) to the list of + algorithms.</p><p>If the wanted algorithms already are in the list of algorithms, they will first + be removed and then appended or prepended. + </p> + </item> + <item><p>Remove (rm) one or more algorithms from the list of algorithms.</p></item> + </list> + <p>If an unsupported algorithm is in the list, it will be silently ignored</p> + + <p>Here is an example of this option:</p> + <code> +{modify_algorithms, + [{prepend, [{kex, ['diffie-hellman-group1-sha1']}], + {rm, [{compression, [none]}]} + ] +} +</code> + <p>The example specifies that:</p> + <list> + <item><p>the old key exchange algorithm 'diffie-hellman-group1-sha1' should be + the main alternative. It will be the main alternative since it is prepened to the list</p> + </item> + <item><p>The compression algorithm none (= no compression) is removed so compression is enforced</p> + </item> + </list> + <p>For background and more examples see the <seealso marker="configure_algos#introduction">User's Guide</seealso>.</p> + </item> + <tag><c><![CDATA[{dh_gex_limits,{Min=integer(),I=integer(),Max=integer()}}]]></c></tag> <item> <p>Sets the three diffie-hellman-group-exchange parameters that guides the connected server in choosing a group. @@ -555,6 +596,8 @@ for cipher but specifies the same algorithms for mac and compression in both directions. The kex (key exchange) is implicit but public_key is set explicitly.</p> + <p>For background and more examples see the <seealso marker="configure_algos#introduction">User's Guide</seealso>.</p> + <warning> <p>Changing the values can make a connection less secure. Do not change unless you know exactly what you are doing. If you do not understand the values then you @@ -562,6 +605,41 @@ </warning> </item> + <tag><marker id="option_modify_algorithms"></marker> + <c><![CDATA[{modify_algorithms, modify_algs_list()}]]></c></tag> + <item> + <p>Modifies the list of algorithms to use in the algorithm negotiation. The modifications are + applied after the option <c>preferred_algorithms</c> is applied (if existing)</p> + <p>The possible modifications are to:</p> + <list> + <item><p>Append or prepend supported but not enabled algorithm(s) to the list of + algorithms.</p><p>If the wanted algorithms already are in the list of algorithms, they will first + be removed and then appended or prepended. + </p> + </item> + <item><p>Remove (rm) one or more algorithms from the list of algorithms.</p></item> + </list> + <p>If an unsupported algorithm is in the list, it will be silently ignored</p> + + <p>Here is an example of this option:</p> + <code> +{modify_algorithms, + [{prepend, [{kex, ['diffie-hellman-group1-sha1']}], + {rm, [{compression, [none]}]} + ] +} +</code> + <p>The example specifies that:</p> + <list> + <item><p>the old key exchange algorithm 'diffie-hellman-group1-sha1' should be + the main alternative. It will be the main alternative since it is prepened to the list</p> + </item> + <item><p>The compression algorithm none (= no compression) is removed so compression is enforced</p> + </item> + </list> + <p>For background and more examples see the <seealso marker="configure_algos#introduction">User's Guide</seealso>.</p> + </item> + <tag><c><![CDATA[{dh_gex_groups, [{Size=integer(),G=integer(),P=integer()}] | {file,filename()} {ssh_moduli_file,filename()} }]]></c></tag> <item> <p>Defines the groups the server may choose among when diffie-hellman-group-exchange is negotiated. diff --git a/lib/ssh/doc/src/ssh_app.xml b/lib/ssh/doc/src/ssh_app.xml index 33ec7aaee0..1cbbdfcf38 100644 --- a/lib/ssh/doc/src/ssh_app.xml +++ b/lib/ssh/doc/src/ssh_app.xml @@ -97,7 +97,7 @@ <p>The <c>known_hosts</c> file contains a list of approved servers and their public keys. Once a server is listed, it can be verified without user interaction. - </p> + </p> </section> <section> <title>Authorized Keys</title> @@ -135,7 +135,7 @@ </p> <p>Supported algorithms are:</p> - + <marker id="supported_algos"></marker> <taglist> <tag>Key exchange algorithms</tag> <item> diff --git a/lib/ssh/doc/src/usersguide.xml b/lib/ssh/doc/src/usersguide.xml index 70051ba771..d902df6848 100644 --- a/lib/ssh/doc/src/usersguide.xml +++ b/lib/ssh/doc/src/usersguide.xml @@ -36,4 +36,5 @@ </description> <xi:include href="introduction.xml"/> <xi:include href="using_ssh.xml"/> + <xi:include href="configure_algos.xml"/> </part> |