diff options
Diffstat (limited to 'lib/ssh/doc/standard/draft-ietf-secsh-filexfer-03.2.ps')
| -rw-r--r-- | lib/ssh/doc/standard/draft-ietf-secsh-filexfer-03.2.ps | 3511 |
1 files changed, 3511 insertions, 0 deletions
diff --git a/lib/ssh/doc/standard/draft-ietf-secsh-filexfer-03.2.ps b/lib/ssh/doc/standard/draft-ietf-secsh-filexfer-03.2.ps new file mode 100644 index 0000000000..6a40cd6067 --- /dev/null +++ b/lib/ssh/doc/standard/draft-ietf-secsh-filexfer-03.2.ps @@ -0,0 +1,3511 @@ +%!PS-Adobe-3.0 +%%BoundingBox: 75 0 595 747 +%%Title: Enscript Output +%%For: Magnus Thoang +%%Creator: GNU enscript 1.6.1 +%%CreationDate: Wed Nov 12 12:18:50 2003 +%%Orientation: Portrait +%%Pages: 18 0 +%%DocumentMedia: A4 595 842 0 () () +%%DocumentNeededResources: (atend) +%%EndComments +%%BeginProlog +%%BeginProcSet: PStoPS 1 15 +userdict begin +[/showpage/erasepage/copypage]{dup where{pop dup load + type/operatortype eq{1 array cvx dup 0 3 index cvx put + bind def}{pop}ifelse}{pop}ifelse}forall +[/letter/legal/executivepage/a4/a4small/b5/com10envelope + /monarchenvelope/c5envelope/dlenvelope/lettersmall/note + /folio/quarto/a5]{dup where{dup wcheck{exch{}put} + {pop{}def}ifelse}{pop}ifelse}forall +/setpagedevice {pop}bind 1 index where{dup wcheck{3 1 roll put} + {pop def}ifelse}{def}ifelse +/PStoPSmatrix matrix currentmatrix def +/PStoPSxform matrix def/PStoPSclip{clippath}def +/defaultmatrix{PStoPSmatrix exch PStoPSxform exch concatmatrix}bind def +/initmatrix{matrix defaultmatrix setmatrix}bind def +/initclip[{matrix currentmatrix PStoPSmatrix setmatrix + [{currentpoint}stopped{$error/newerror false put{newpath}} + {/newpath cvx 3 1 roll/moveto cvx 4 array astore cvx}ifelse] + {[/newpath cvx{/moveto cvx}{/lineto cvx} + {/curveto cvx}{/closepath cvx}pathforall]cvx exch pop} + stopped{$error/errorname get/invalidaccess eq{cleartomark + $error/newerror false put cvx exec}{stop}ifelse}if}bind aload pop + /initclip dup load dup type dup/operatortype eq{pop exch pop} + {dup/arraytype eq exch/packedarraytype eq or + {dup xcheck{exch pop aload pop}{pop cvx}ifelse} + {pop cvx}ifelse}ifelse + {newpath PStoPSclip clip newpath exec setmatrix} bind aload pop]cvx def +/initgraphics{initmatrix newpath initclip 1 setlinewidth + 0 setlinecap 0 setlinejoin []0 setdash 0 setgray + 10 setmiterlimit}bind def +end +%%EndProcSet +%%BeginResource: procset Enscript-Prolog 1.6 1 +% +% Procedures. +% + +/_S { % save current state + /_s save def +} def +/_R { % restore from saved state + _s restore +} def + +/S { % showpage protecting gstate + gsave + showpage + grestore +} bind def + +/MF { % fontname newfontname -> - make a new encoded font + /newfontname exch def + /fontname exch def + + /fontdict fontname findfont def + /newfont fontdict maxlength dict def + + fontdict { + exch + dup /FID eq { + % skip FID pair + pop pop + } { + % copy to the new font dictionary + exch newfont 3 1 roll put + } ifelse + } forall + + newfont /FontName newfontname put + + % insert only valid encoding vectors + encoding_vector length 256 eq { + newfont /Encoding encoding_vector put + } if + + newfontname newfont definefont pop +} def + +/SF { % fontname width height -> - set a new font + /height exch def + /width exch def + + findfont + [width 0 0 height 0 0] makefont setfont +} def + +/SUF { % fontname width height -> - set a new user font + /height exch def + /width exch def + + /F-gs-user-font MF + /F-gs-user-font width height SF +} def + +/M {moveto} bind def +/s {show} bind def + +/Box { % x y w h -> - define box path + /d_h exch def /d_w exch def /d_y exch def /d_x exch def + d_x d_y moveto + d_w 0 rlineto + 0 d_h rlineto + d_w neg 0 rlineto + closepath +} def + +/bgs { % x y height blskip gray str -> - show string with bg color + /str exch def + /gray exch def + /blskip exch def + /height exch def + /y exch def + /x exch def + + gsave + x y blskip sub str stringwidth pop height Box + gray setgray + fill + grestore + x y M str s +} def + +% Highlight bars. +/highlight_bars { % nlines lineheight output_y_margin gray -> - + gsave + setgray + /ymarg exch def + /lineheight exch def + /nlines exch def + + % This 2 is just a magic number to sync highlight lines to text. + 0 d_header_y ymarg sub 2 sub translate + + /cw d_output_w cols div def + /nrows d_output_h ymarg 2 mul sub lineheight div cvi def + + % for each column + 0 1 cols 1 sub { + cw mul /xp exch def + + % for each rows + 0 1 nrows 1 sub { + /rn exch def + rn lineheight mul neg /yp exch def + rn nlines idiv 2 mod 0 eq { + % Draw highlight bar. 4 is just a magic indentation. + xp 4 add yp cw 8 sub lineheight neg Box fill + } if + } for + } for + + grestore +} def + +% Line highlight bar. +/line_highlight { % x y width height gray -> - + gsave + /gray exch def + Box gray setgray fill + grestore +} def + +% Column separator lines. +/column_lines { + gsave + .1 setlinewidth + 0 d_footer_h translate + /cw d_output_w cols div def + 1 1 cols 1 sub { + cw mul 0 moveto + 0 d_output_h rlineto stroke + } for + grestore +} def + +% Column borders. +/column_borders { + gsave + .1 setlinewidth + 0 d_footer_h moveto + 0 d_output_h rlineto + d_output_w 0 rlineto + 0 d_output_h neg rlineto + closepath stroke + grestore +} def + +% Do the actual underlay drawing +/draw_underlay { + ul_style 0 eq { + ul_str true charpath stroke + } { + ul_str show + } ifelse +} def + +% Underlay +/underlay { % - -> - + gsave + 0 d_page_h translate + d_page_h neg d_page_w atan rotate + + ul_gray setgray + ul_font setfont + /dw d_page_h dup mul d_page_w dup mul add sqrt def + ul_str stringwidth pop dw exch sub 2 div ul_h_ptsize -2 div moveto + draw_underlay + grestore +} def + +/user_underlay { % - -> - + gsave + ul_x ul_y translate + ul_angle rotate + ul_gray setgray + ul_font setfont + 0 0 ul_h_ptsize 2 div sub moveto + draw_underlay + grestore +} def + +% Page prefeed +/page_prefeed { % bool -> - + statusdict /prefeed known { + statusdict exch /prefeed exch put + } { + pop + } ifelse +} def + +% Wrapped line markers +/wrapped_line_mark { % x y charwith charheight type -> - + /type exch def + /h exch def + /w exch def + /y exch def + /x exch def + + type 2 eq { + % Black boxes (like TeX does) + gsave + 0 setlinewidth + x w 4 div add y M + 0 h rlineto w 2 div 0 rlineto 0 h neg rlineto + closepath fill + grestore + } { + type 3 eq { + % Small arrows + gsave + .2 setlinewidth + x w 2 div add y h 2 div add M + w 4 div 0 rlineto + x w 4 div add y lineto stroke + + x w 4 div add w 8 div add y h 4 div add M + x w 4 div add y lineto + w 4 div h 8 div rlineto stroke + grestore + } { + % do nothing + } ifelse + } ifelse +} def + +% EPSF import. + +/BeginEPSF { + /b4_Inc_state save def % Save state for cleanup + /dict_count countdictstack def % Count objects on dict stack + /op_count count 1 sub def % Count objects on operand stack + userdict begin + /showpage { } def + 0 setgray 0 setlinecap + 1 setlinewidth 0 setlinejoin + 10 setmiterlimit [ ] 0 setdash newpath + /languagelevel where { + pop languagelevel + 1 ne { + false setstrokeadjust false setoverprint + } if + } if +} bind def + +/EndEPSF { + count op_count sub { pos } repeat % Clean up stacks + countdictstack dict_count sub { end } repeat + b4_Inc_state restore +} bind def + +% Check PostScript language level. +/languagelevel where { + pop /gs_languagelevel languagelevel def +} { + /gs_languagelevel 1 def +} ifelse +%%EndResource +%%BeginResource: procset Enscript-Encoding-88591 1.6 1 +/encoding_vector [ +/.notdef /.notdef /.notdef /.notdef +/.notdef /.notdef /.notdef /.notdef +/.notdef /.notdef /.notdef /.notdef +/.notdef /.notdef /.notdef /.notdef +/.notdef /.notdef /.notdef /.notdef +/.notdef /.notdef /.notdef /.notdef +/.notdef /.notdef /.notdef /.notdef +/.notdef /.notdef /.notdef /.notdef +/space /exclam /quotedbl /numbersign +/dollar /percent /ampersand /quoteright +/parenleft /parenright /asterisk /plus +/comma /hyphen /period /slash +/zero /one /two /three +/four /five /six /seven +/eight /nine /colon /semicolon +/less /equal /greater /question +/at /A /B /C +/D /E /F /G +/H /I /J /K +/L /M /N /O +/P /Q /R /S +/T /U /V /W +/X /Y /Z /bracketleft +/backslash /bracketright /asciicircum /underscore +/quoteleft /a /b /c +/d /e /f /g +/h /i /j /k +/l /m /n /o +/p /q /r /s +/t /u /v /w +/x /y /z /braceleft +/bar /braceright /tilde /.notdef +/.notdef /.notdef /.notdef /.notdef +/.notdef /.notdef /.notdef /.notdef +/.notdef /.notdef /.notdef /.notdef +/.notdef /.notdef /.notdef /.notdef +/.notdef /.notdef /.notdef /.notdef +/.notdef /.notdef /.notdef /.notdef +/.notdef /.notdef /.notdef /.notdef +/.notdef /.notdef /.notdef /.notdef +/space /exclamdown /cent /sterling +/currency /yen /brokenbar /section +/dieresis /copyright /ordfeminine /guillemotleft +/logicalnot /hyphen /registered /macron +/degree /plusminus /twosuperior /threesuperior +/acute /mu /paragraph /bullet +/cedilla /onesuperior /ordmasculine /guillemotright +/onequarter /onehalf /threequarters /questiondown +/Agrave /Aacute /Acircumflex /Atilde +/Adieresis /Aring /AE /Ccedilla +/Egrave /Eacute /Ecircumflex /Edieresis +/Igrave /Iacute /Icircumflex /Idieresis +/Eth /Ntilde /Ograve /Oacute +/Ocircumflex /Otilde /Odieresis /multiply +/Oslash /Ugrave /Uacute /Ucircumflex +/Udieresis /Yacute /Thorn /germandbls +/agrave /aacute /acircumflex /atilde +/adieresis /aring /ae /ccedilla +/egrave /eacute /ecircumflex /edieresis +/igrave /iacute /icircumflex /idieresis +/eth /ntilde /ograve /oacute +/ocircumflex /otilde /odieresis /divide +/oslash /ugrave /uacute /ucircumflex +/udieresis /yacute /thorn /ydieresis +] def +%%EndResource +%%EndProlog +%%BeginSetup +%%IncludeResource: font Courier-Bold +%%IncludeResource: font Courier +/HFpt_w 10 def +/HFpt_h 10 def +/Courier-Bold /HF-gs-font MF +/HF /HF-gs-font findfont [HFpt_w 0 0 HFpt_h 0 0] makefont def +/Courier /F-gs-font MF +/F-gs-font 10 10 SF +/#copies 1 def +/d_page_w 520 def +/d_page_h 747 def +/d_header_x 0 def +/d_header_y 747 def +/d_header_w 520 def +/d_header_h 0 def +/d_footer_x 0 def +/d_footer_y 0 def +/d_footer_w 520 def +/d_footer_h 0 def +/d_output_w 520 def +/d_output_h 747 def +/cols 1 def +userdict/PStoPSxform PStoPSmatrix matrix currentmatrix + matrix invertmatrix matrix concatmatrix + matrix invertmatrix put +%%EndSetup +%%Page: (0,1) 1 +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 0.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +/showpage{}def/copypage{}def/erasepage{}def +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 1 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 701 M +(Secure Shell Working Group J. Galbraith) s +5 690 M +(Internet-Draft VanDyke Software) s +5 679 M +(Expires: April 16, 2003 T. Ylonen) s +5 668 M +( S. Lehtinen) s +5 657 M +( SSH Communications Security Corp) s +5 646 M +( October 16, 2002) s +5 613 M +( SSH File Transfer Protocol) s +5 602 M +( draft-ietf-secsh-filexfer-03.txt) s +5 580 M +(Status of this Memo) s +5 558 M +( This document is an Internet-Draft and is in full conformance with) s +5 547 M +( all provisions of Section 10 of RFC2026.) s +5 525 M +( Internet-Drafts are working documents of the Internet Engineering) s +5 514 M +( Task Force \(IETF\), its areas, and its working groups. Note that) s +5 503 M +( other groups may also distribute working documents as Internet-) s +5 492 M +( Drafts.) s +5 470 M +( Internet-Drafts are draft documents valid for a maximum of six months) s +5 459 M +( and may be updated, replaced, or obsoleted by other documents at any) s +5 448 M +( time. It is inappropriate to use Internet-Drafts as reference) s +5 437 M +( material or to cite them other than as "work in progress.") s +5 415 M +( The list of current Internet-Drafts can be accessed at http://) s +5 404 M +( www.ietf.org/ietf/1id-abstracts.txt.) s +5 382 M +( The list of Internet-Draft Shadow Directories can be accessed at) s +5 371 M +( http://www.ietf.org/shadow.html.) s +5 349 M +( This Internet-Draft will expire on April 16, 2003.) s +5 327 M +(Copyright Notice) s +5 305 M +( Copyright \(C\) The Internet Society \(2002\). All Rights Reserved.) s +5 283 M +(Abstract) s +5 261 M +( The SSH File Transfer Protocol provides secure file transfer) s +5 250 M +( functionality over any reliable data stream. It is the standard file) s +5 239 M +( transfer protocol for use with the SSH2 protocol. This document) s +5 228 M +( describes the file transfer protocol and its interface to the SSH2) s +5 217 M +( protocol suite.) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 1]) s +_R +S +PStoPSsaved restore +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 421.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 2 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +(Table of Contents) s +5 668 M +( 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . 3) s +5 657 M +( 2. Use with the SSH Connection Protocol . . . . . . . . . . . 4) s +5 646 M +( 3. General Packet Format . . . . . . . . . . . . . . . . . . 5) s +5 635 M +( 4. Protocol Initialization . . . . . . . . . . . . . . . . . 7) s +5 624 M +( 4.1 Client Initialization . . . . . . . . . . . . . . . . . . 7) s +5 613 M +( 4.2 Server Initialization . . . . . . . . . . . . . . . . . . 7) s +5 602 M +( 4.3 Determining Server Newline Convention . . . . . . . . . . 8) s +5 591 M +( 5. File Attributes . . . . . . . . . . . . . . . . . . . . . 9) s +5 580 M +( 5.1 Flags . . . . . . . . . . . . . . . . . . . . . . . . . . 9) s +5 569 M +( 5.2 Type . . . . . . . . . . . . . . . . . . . . . . . . . . . 10) s +5 558 M +( 5.3 Size . . . . . . . . . . . . . . . . . . . . . . . . . . . 10) s +5 547 M +( 5.4 Owner and Group . . . . . . . . . . . . . . . . . . . . . 10) s +5 536 M +( 5.5 Permissions . . . . . . . . . . . . . . . . . . . . . . . 11) s +5 525 M +( 5.6 Times . . . . . . . . . . . . . . . . . . . . . . . . . . 11) s +5 514 M +( 5.7 ACL . . . . . . . . . . . . . . . . . . . . . . . . . . . 11) s +5 503 M +( 5.8 Extended attributes . . . . . . . . . . . . . . . . . . . 12) s +5 492 M +( 6. Requests From the Client to the Server . . . . . . . . . . 13) s +5 481 M +( 6.1 Request Synchronization and Reordering . . . . . . . . . . 13) s +5 470 M +( 6.2 File Names . . . . . . . . . . . . . . . . . . . . . . . . 14) s +5 459 M +( 6.3 Opening, Creating, and Closing Files . . . . . . . . . . . 14) s +5 448 M +( 6.4 Reading and Writing . . . . . . . . . . . . . . . . . . . 17) s +5 437 M +( 6.5 Removing and Renaming Files . . . . . . . . . . . . . . . 18) s +5 426 M +( 6.6 Creating and Deleting Directories . . . . . . . . . . . . 19) s +5 415 M +( 6.7 Scanning Directories . . . . . . . . . . . . . . . . . . . 19) s +5 404 M +( 6.8 Retrieving File Attributes . . . . . . . . . . . . . . . . 20) s +5 393 M +( 6.9 Setting File Attributes . . . . . . . . . . . . . . . . . 21) s +5 382 M +( 6.10 Dealing with Symbolic links . . . . . . . . . . . . . . . 22) s +5 371 M +( 6.11 Canonicalizing the Server-Side Path Name . . . . . . . . . 23) s +5 360 M +( 6.11.1 Best practice for dealing with paths . . . . . . . . . . . 23) s +5 349 M +( 7. Responses from the Server to the Client . . . . . . . . . 24) s +5 338 M +( 8. Vendor-Specific Extensions . . . . . . . . . . . . . . . . 28) s +5 327 M +( 9. Security Considerations . . . . . . . . . . . . . . . . . 29) s +5 316 M +( 10. Changes from previous protocol versions . . . . . . . . . 30) s +5 305 M +( 10.1 Changes between versions 4 and 3 . . . . . . . . . . . . . 30) s +5 294 M +( 10.2 Changes between versions 3 and 2 . . . . . . . . . . . . . 31) s +5 283 M +( 10.3 Changes between versions 2 and 1 . . . . . . . . . . . . . 31) s +5 272 M +( 10.4 Changes between versions 1 and 0 . . . . . . . . . . . . . 31) s +5 261 M +( 11. Trademark Issues . . . . . . . . . . . . . . . . . . . . . 32) s +5 250 M +( References . . . . . . . . . . . . . . . . . . . . . . . . 33) s +5 239 M +( Authors' Addresses . . . . . . . . . . . . . . . . . . . . 33) s +5 228 M +( Full Copyright Statement . . . . . . . . . . . . . . . . . 35) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 2]) s +_R +S +PStoPSsaved restore +%%Page: (2,3) 2 +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 0.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +/showpage{}def/copypage{}def/erasepage{}def +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 3 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +(1. Introduction) s +5 668 M +( This protocol provides secure file transfer \(and more generally file) s +5 657 M +( system access\) functionality over a reliable data stream, such as a) s +5 646 M +( channel in the SSH2 protocol [5].) s +5 624 M +( This protocol is designed so that it could be used to implement a) s +5 613 M +( secure remote file system service, as well as a secure file transfer) s +5 602 M +( service.) s +5 580 M +( This protocol assumes that it runs over a secure channel, and that) s +5 569 M +( the server has already authenticated the user at the client end, and) s +5 558 M +( that the identity of the client user is externally available to the) s +5 547 M +( server implementation.) s +5 525 M +( In general, this protocol follows a simple request-response model.) s +5 514 M +( Each request and response contains a sequence number and multiple) s +5 503 M +( requests may be pending simultaneously. There are a relatively large) s +5 492 M +( number of different request messages, but a small number of possible) s +5 481 M +( response messages. Each request has one or more response messages) s +5 470 M +( that may be returned in result \(e.g., a read either returns data or) s +5 459 M +( reports error status\).) s +5 437 M +( The packet format descriptions in this specification follow the) s +5 426 M +( notation presented in the secsh architecture draft. [5]) s +5 404 M +( Even though this protocol is described in the context of the SSH2) s +5 393 M +( protocol, this protocol is general and independent of the rest of the) s +5 382 M +( SSH2 protocol suite. It could be used in a number of different) s +5 371 M +( applications, such as secure file transfer over TLS RFC 2246 [1] and) s +5 360 M +( transfer of management information in VPN applications.) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 3]) s +_R +S +PStoPSsaved restore +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 421.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 4 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +(2. Use with the SSH Connection Protocol) s +5 668 M +( When used with the SSH2 Protocol suite, this protocol is intended to) s +5 657 M +( be used from the SSH Connection Protocol [7] as a subsystem, as) s +5 646 M +( described in section ``Starting a Shell or a Command''. The) s +5 635 M +( subsystem name used with this protocol is "sftp".) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 4]) s +_R +S +PStoPSsaved restore +%%Page: (4,5) 3 +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 0.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +/showpage{}def/copypage{}def/erasepage{}def +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 5 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +(3. General Packet Format) s +5 668 M +( All packets transmitted over the secure connection are of the) s +5 657 M +( following format:) s +5 635 M +( uint32 length) s +5 624 M +( byte type) s +5 613 M +( byte[length - 1] data payload) s +5 591 M +( That is, they are just data preceded by 32-bit length and 8-bit type) s +5 580 M +( fields. The `length' is the length of the data area, and does not) s +5 569 M +( include the `length' field itself. The format and interpretation of) s +5 558 M +( the data area depends on the packet type.) s +5 536 M +( All packet descriptions below only specify the packet type and the) s +5 525 M +( data that goes into the data field. Thus, they should be prefixed by) s +5 514 M +( the `length' and `type' fields.) s +5 492 M +( The maximum size of a packet is in practice determined by the client) s +5 481 M +( \(the maximum size of read or write requests that it sends, plus a few) s +5 470 M +( bytes of packet overhead\). All servers SHOULD support packets of at) s +5 459 M +( least 34000 bytes \(where the packet size refers to the full length,) s +5 448 M +( including the header above\). This should allow for reads and writes) s +5 437 M +( of at most 32768 bytes.) s +5 415 M +( There is no limit on the number of outstanding \(non-acknowledged\)) s +5 404 M +( requests that the client may send to the server. In practice this is) s +5 393 M +( limited by the buffering available on the data stream and the queuing) s +5 382 M +( performed by the server. If the server's queues are full, it should) s +5 371 M +( not read any more data from the stream, and flow control will prevent) s +5 360 M +( the client from sending more requests. Note, however, that while) s +5 349 M +( there is no restriction on the protocol level, the client's API may) s +5 338 M +( provide a limit in order to prevent infinite queuing of outgoing) s +5 327 M +( requests at the client.) s +5 305 M +( The following values are defined for packet types.) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 5]) s +_R +S +PStoPSsaved restore +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 421.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 6 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +( #define SSH_FXP_INIT 1) s +5 679 M +( #define SSH_FXP_VERSION 2) s +5 668 M +( #define SSH_FXP_OPEN 3) s +5 657 M +( #define SSH_FXP_CLOSE 4) s +5 646 M +( #define SSH_FXP_READ 5) s +5 635 M +( #define SSH_FXP_WRITE 6) s +5 624 M +( #define SSH_FXP_LSTAT 7) s +5 613 M +( #define SSH_FXP_FSTAT 8) s +5 602 M +( #define SSH_FXP_SETSTAT 9) s +5 591 M +( #define SSH_FXP_FSETSTAT 10) s +5 580 M +( #define SSH_FXP_OPENDIR 11) s +5 569 M +( #define SSH_FXP_READDIR 12) s +5 558 M +( #define SSH_FXP_REMOVE 13) s +5 547 M +( #define SSH_FXP_MKDIR 14) s +5 536 M +( #define SSH_FXP_RMDIR 15) s +5 525 M +( #define SSH_FXP_REALPATH 16) s +5 514 M +( #define SSH_FXP_STAT 17) s +5 503 M +( #define SSH_FXP_RENAME 18) s +5 492 M +( #define SSH_FXP_READLINK 19) s +5 481 M +( #define SSH_FXP_SYMLINK 20) s +5 459 M +( #define SSH_FXP_STATUS 101) s +5 448 M +( #define SSH_FXP_HANDLE 102) s +5 437 M +( #define SSH_FXP_DATA 103) s +5 426 M +( #define SSH_FXP_NAME 104) s +5 415 M +( #define SSH_FXP_ATTRS 105) s +5 393 M +( #define SSH_FXP_EXTENDED 200) s +5 382 M +( #define SSH_FXP_EXTENDED_REPLY 201) s +5 360 M +( RESERVED_FOR_EXTENSIONS 210-255) s +5 338 M +( Additional packet types should only be defined if the protocol) s +5 327 M +( version number \(see Section ``Protocol Initialization''\) is) s +5 316 M +( incremented, and their use MUST be negotiated using the version) s +5 305 M +( number. However, the SSH_FXP_EXTENDED and SSH_FXP_EXTENDED_REPLY) s +5 294 M +( packets can be used to implement vendor-specific extensions. See) s +5 283 M +( Section ``Vendor-Specific-Extensions'' for more details.) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 6]) s +_R +S +PStoPSsaved restore +%%Page: (6,7) 4 +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 0.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +/showpage{}def/copypage{}def/erasepage{}def +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 7 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +(4. Protocol Initialization) s +5 668 M +( When the file transfer protocol starts, the client first sends a) s +5 657 M +( SSH_FXP_INIT \(including its version number\) packet to the server.) s +5 646 M +( The server responds with a SSH_FXP_VERSION packet, supplying the) s +5 635 M +( lowest of its own and the client's version number. Both parties) s +5 624 M +( should from then on adhere to particular version of the protocol.) s +5 602 M +( The version number of the protocol specified in this document is 4.) s +5 591 M +( The version number should be incremented for each incompatible) s +5 580 M +( revision of this protocol.) s +5 558 M +(4.1 Client Initialization) s +5 536 M +( The SSH_FXP_INIT packet \(from client to server\) has the following) s +5 525 M +( data:) s +5 503 M +( uint32 version) s +5 481 M +( Version 3 of this protocol allowed clients to include extensions in) s +5 470 M +( the SSH_FXP_INIT packet; however, this can cause interoperability) s +5 459 M +( problems with version 1 and version 2 servers because the client must) s +5 448 M +( send this packet before knowing the servers version.) s +5 426 M +( In this version of the protocol, clients MUST use the) s +5 415 M +( SSH_FXP_EXTENDED packet to send extensions to the server after) s +5 404 M +( version exchange has completed. Clients MUST NOT include extensions) s +5 393 M +( in the version packet. This will prevent interoperability problems) s +5 382 M +( with older servers) s +5 360 M +(4.2 Server Initialization) s +5 338 M +( The SSH_FXP_VERSION packet \(from server to client\) has the following) s +5 327 M +( data:) s +5 305 M +( uint32 version) s +5 294 M +( <extension data>) s +5 272 M +( 'version' is the lower of the protocol version supported by the) s +5 261 M +( server and the version number received from the client.) s +5 239 M +( The extension data may be empty, or may be a sequence of) s +5 217 M +( string extension_name) s +5 206 M +( string extension_data) s +5 184 M +( pairs \(both strings MUST always be present if one is, but the) s +5 173 M +( `extension_data' string may be of zero length\). If present, these) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 7]) s +_R +S +PStoPSsaved restore +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 421.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 8 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +( strings indicate extensions to the baseline protocol. The) s +5 679 M +( `extension_name' field\(s\) identify the name of the extension. The) s +5 668 M +( name should be of the form "name@domain", where the domain is the DNS) s +5 657 M +( domain name of the organization defining the extension. Additional) s +5 646 M +( names that are not of this format may be defined later by the IETF.) s +5 635 M +( Implementations MUST silently ignore any extensions whose name they) s +5 624 M +( do not recognize.) s +5 602 M +(4.3 Determining Server Newline Convention) s +5 580 M +( In order to correctly process text files in a cross platform) s +5 569 M +( compatible way, the newline convention must be converted from that of) s +5 558 M +( the server to that of the client, or, during an upload, from that of) s +5 547 M +( the client to that of the server.) s +5 525 M +( Versions 3 and prior of this protocol made no provisions for) s +5 514 M +( processing text files. Many clients implemented some sort of) s +5 503 M +( conversion algorithm, but without either a 'canonical' on the wire) s +5 492 M +( format or knowledge of the servers newline convention, correct) s +5 481 M +( conversion was not always possible.) s +5 459 M +( Starting with Version 4, the SSH_FXF_TEXT file open flag \(Section) s +5 448 M +( 6.3\) makes it possible to request that the server translate a file to) s +5 437 M +( a 'canonical' on the wire format. This format uses \\r\\n as the line) s +5 426 M +( separator.) s +5 404 M +( Servers for systems using multiple newline characters \(for example,) s +5 393 M +( Mac OS X or VMS\) or systems using counted records, MUST translate to) s +5 382 M +( the canonical form.) s +5 360 M +( However, to ease the burden of implementation on servers that use a) s +5 349 M +( single, simple separator sequence, the following extension allows the) s +5 338 M +( canonical format to be changed.) s +5 316 M +( string "newline") s +5 305 M +( string new-canonical-separator \(usually "\\r" or "\\n" or "\\r\\n"\)) s +5 283 M +( All clients MUST support this extension.) s +5 261 M +( When processing text files, clients SHOULD NOT translate any) s +5 250 M +( character or sequence that is not an exact match of the servers) s +5 239 M +( newline separator.) s +5 217 M +( In particular, if the newline sequence being used is the canonical) s +5 206 M +( "\\r\\n" sequence, a lone \\r or a lone \\n SHOULD be written through) s +5 195 M +( without change.) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 8]) s +_R +S +PStoPSsaved restore +%%Page: (8,9) 5 +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 0.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +/showpage{}def/copypage{}def/erasepage{}def +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 9 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +(5. File Attributes) s +5 668 M +( A new compound data type is defined for encoding file attributes.) s +5 657 M +( The same encoding is used both when returning file attributes from) s +5 646 M +( the server and when sending file attributes to the server. When) s +5 635 M +( sending it to the server, the flags field specifies which attributes) s +5 624 M +( are included, and the server will use default values for the) s +5 613 M +( remaining attributes \(or will not modify the values of remaining) s +5 602 M +( attributes\). When receiving attributes from the server, the flags) s +5 591 M +( specify which attributes are included in the returned data. The) s +5 580 M +( server normally returns all attributes it knows about.) s +5 558 M +( uint32 flags) s +5 547 M +( byte type always present) s +5 536 M +( uint64 size present only if flag SSH_FILEXFER_ATTR_SIZE) s +5 525 M +( string owner present only if flag SSH_FILEXFER_ATTR_OWNERGROUP) s +5 514 M +( string group present only if flag SSH_FILEXFER_ATTR_OWNERGROUP) s +5 503 M +( uint32 permissions present only if flag SSH_FILEXFER_ATTR_PERMISSIONS) s +5 492 M +( uint32 atime present only if flag SSH_FILEXFER_ATTR_ACCESSTIME) s +5 481 M +( uint32 createtime present only if flag SSH_FILEXFER_ATTR_CREATETIME) s +5 470 M +( uint32 mtime present only if flag SSH_FILEXFER_ATTR_MODIFYTIME) s +5 459 M +( string acl present only if flag SSH_FILEXFER_ATTR_ACL) s +5 448 M +( uint32 extended_count present only if flag SSH_FILEXFER_ATTR_EXTENDED) s +5 437 M +( string extended_type) s +5 426 M +( string extended_data) s +5 415 M +( ... more extended data \(extended_type - extended_data pairs\),) s +5 404 M +( so that number of pairs equals extended_count) s +5 371 M +(5.1 Flags) s +5 349 M +( The `flags' specify which of the fields are present. Those fields) s +5 338 M +( for which the corresponding flag is not set are not present \(not) s +5 327 M +( included in the packet\). New flags can only be added by incrementing) s +5 316 M +( the protocol version number \(or by using the extension mechanism) s +5 305 M +( described below\).) s +5 283 M +( The flags bits are defined to have the following values:) s +5 261 M +( #define SSH_FILEXFER_ATTR_SIZE 0x00000001) s +5 250 M +( #define SSH_FILEXFER_ATTR_PERMISSIONS 0x00000004) s +5 239 M +( #define SSH_FILEXFER_ATTR_ACCESSTIME 0x00000008) s +5 228 M +( #define SSH_FILEXFER_ATTR_CREATETIME 0x00000010) s +5 217 M +( #define SSH_FILEXFER_ATTR_MODIFYTIME 0x00000020) s +5 206 M +( #define SSH_FILEXFER_ATTR_ACL 0x00000040) s +5 195 M +( #define SSH_FILEXFER_ATTR_OWNERGROUP 0x00000080) s +5 184 M +( #define SSH_FILEXFER_ATTR_EXTENDED 0x80000000) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 9]) s +_R +S +PStoPSsaved restore +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 421.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 10 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +( In previous versions of this protocol flags value 0x00000002 was) s +5 679 M +( SSH_FILEXFER_ATTR_UIDGID. This value is now unused, and OWNERGROUP) s +5 668 M +( was given a new value in order to ease implementation burden.) s +5 657 M +( 0x00000002 MUST NOT appear in the mask. Some future version of this) s +5 646 M +( protocol may reuse flag 0x00000002.) s +5 624 M +(5.2 Type) s +5 602 M +( The type field is always present. The following types are defined:) s +5 580 M +( #define SSH_FILEXFER_TYPE_REGULAR 1) s +5 569 M +( #define SSH_FILEXFER_TYPE_DIRECTORY 2) s +5 558 M +( #define SSH_FILEXFER_TYPE_SYMLINK 3) s +5 547 M +( #define SSH_FILEXFER_TYPE_SPECIAL 4) s +5 536 M +( #define SSH_FILEXFER_TYPE_UNKNOWN 5) s +5 514 M +( On a POSIX system, these values would be derived from the permission) s +5 503 M +( field.) s +5 481 M +(5.3 Size) s +5 459 M +( The `size' field specifies the size of the file on disk, in bytes.) s +5 448 M +( If it is present during file creation, it should be considered a hint) s +5 437 M +( as to the files eventual size.) s +5 415 M +( Files opened with the SSH_FXF_TEXT flag may have a size that is) s +5 404 M +( greater or less than the value of the size field.) s +5 382 M +(5.4 Owner and Group) s +5 360 M +( The `owner' and `group' fields are represented as UTF-8 strings; this) s +5 349 M +( is the form used by NFS v4. See NFS version 4 Protocol. [3] The) s +5 338 M +( following text is selected quotations from section 5.6.) s +5 316 M +( To avoid a representation that is tied to a particular underlying) s +5 305 M +( implementation at the client or server, the use of UTF-8 strings has) s +5 294 M +( been chosen. The string should be of the form user@dns_domain".) s +5 283 M +( This will allow for a client and server that do not use the same) s +5 272 M +( local representation the ability to translate to a common syntax that) s +5 261 M +( can be interpreted by both. In the case where there is no) s +5 250 M +( translation available to the client or server, the attribute value) s +5 239 M +( must be constructed without the "@". Therefore, the absence of the @) s +5 228 M +( from the owner or owner_group attribute signifies that no translation) s +5 217 M +( was available and the receiver of the attribute should not place any) s +5 206 M +( special meaning with the attribute value. Even though the attribute) s +5 195 M +( value can not be translated, it may still be useful. In the case of) s +5 184 M +( a client, the attribute string may be used for local display of) s +5 173 M +( ownership.) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 10]) s +_R +S +PStoPSsaved restore +%%Page: (10,11) 6 +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 0.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +/showpage{}def/copypage{}def/erasepage{}def +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 11 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +(5.5 Permissions) s +5 668 M +( The `permissions' field contains a bit mask of file permissions as) s +5 657 M +( defined by POSIX [1].) s +5 635 M +(5.6 Times) s +5 613 M +( The 'atime', 'createtime', and 'mtime' contain the access, creation,) s +5 602 M +( and modification times of the files, respectively. They are) s +5 591 M +( represented as seconds from Jan 1, 1970 in UTC.) s +5 569 M +(5.7 ACL) s +5 547 M +( The 'ACL' field contains an ACL similar to that defined in section) s +5 536 M +( 5.9 of NFS version 4 Protocol [3].) s +5 514 M +( uint32 ace-count) s +5 492 M +( repeated ace-count time:) s +5 481 M +( uint32 ace-type) s +5 470 M +( uint32 ace-flag) s +5 459 M +( uint32 ace-mask) s +5 448 M +( string who [UTF-8]) s +5 426 M +( ace-type is one of the following four values \(taken from NFS Version) s +5 415 M +( 4 Protocol [3]:) s +5 393 M +( const ACE4_ACCESS_ALLOWED_ACE_TYPE = 0x00000000;) s +5 382 M +( const ACE4_ACCESS_DENIED_ACE_TYPE = 0x00000001;) s +5 371 M +( const ACE4_SYSTEM_AUDIT_ACE_TYPE = 0x00000002;) s +5 360 M +( const ACE4_SYSTEM_ALARM_ACE_TYPE = 0x00000003;) s +5 338 M +( ace-flag is a combination of the following flag values. See NFS) s +5 327 M +( Version 4 Protocol [3] section 5.9.2:) s +5 305 M +( const ACE4_FILE_INHERIT_ACE = 0x00000001;) s +5 294 M +( const ACE4_DIRECTORY_INHERIT_ACE = 0x00000002;) s +5 283 M +( const ACE4_NO_PROPAGATE_INHERIT_ACE = 0x00000004;) s +5 272 M +( const ACE4_INHERIT_ONLY_ACE = 0x00000008;) s +5 261 M +( const ACE4_SUCCESSFUL_ACCESS_ACE_FLAG = 0x00000010;) s +5 250 M +( const ACE4_FAILED_ACCESS_ACE_FLAG = 0x00000020;) s +5 239 M +( const ACE4_IDENTIFIER_GROUP = 0x00000040;) s +5 217 M +( ace-mask is any combination of the following flags \(taken from NFS) s +5 206 M +( Version 4 Protocol [3] section 5.9.3:) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 11]) s +_R +S +PStoPSsaved restore +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 421.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 12 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +( const ACE4_READ_DATA = 0x00000001;) s +5 679 M +( const ACE4_LIST_DIRECTORY = 0x00000001;) s +5 668 M +( const ACE4_WRITE_DATA = 0x00000002;) s +5 657 M +( const ACE4_ADD_FILE = 0x00000002;) s +5 646 M +( const ACE4_APPEND_DATA = 0x00000004;) s +5 635 M +( const ACE4_ADD_SUBDIRECTORY = 0x00000004;) s +5 624 M +( const ACE4_READ_NAMED_ATTRS = 0x00000008;) s +5 613 M +( const ACE4_WRITE_NAMED_ATTRS = 0x00000010;) s +5 602 M +( const ACE4_EXECUTE = 0x00000020;) s +5 591 M +( const ACE4_DELETE_CHILD = 0x00000040;) s +5 580 M +( const ACE4_READ_ATTRIBUTES = 0x00000080;) s +5 569 M +( const ACE4_WRITE_ATTRIBUTES = 0x00000100;) s +5 558 M +( const ACE4_DELETE = 0x00010000;) s +5 547 M +( const ACE4_READ_ACL = 0x00020000;) s +5 536 M +( const ACE4_WRITE_ACL = 0x00040000;) s +5 525 M +( const ACE4_WRITE_OWNER = 0x00080000;) s +5 514 M +( const ACE4_SYNCHRONIZE = 0x00100000;) s +5 492 M +( who is a UTF-8 string of the form described in 'Owner and Group') s +5 481 M +( \(Section 5.4\)) s +5 459 M +(5.8 Extended attributes) s +5 437 M +( The SSH_FILEXFER_ATTR_EXTENDED flag provides a general extension) s +5 426 M +( mechanism for vendor-specific extensions. If the flag is specified,) s +5 415 M +( then the `extended_count' field is present. It specifies the number) s +5 404 M +( of extended_type-extended_data pairs that follow. Each of these) s +5 393 M +( pairs specifies an extended attribute. For each of the attributes,) s +5 382 M +( the extended_type field should be a string of the format) s +5 371 M +( "name@domain", where "domain" is a valid, registered domain name and) s +5 360 M +( "name" identifies the method. The IETF may later standardize certain) s +5 349 M +( names that deviate from this format \(e.g., that do not contain the) s +5 338 M +( "@" sign\). The interpretation of `extended_data' depends on the) s +5 327 M +( type. Implementations SHOULD ignore extended data fields that they) s +5 316 M +( do not understand.) s +5 294 M +( Additional fields can be added to the attributes by either defining) s +5 283 M +( additional bits to the flags field to indicate their presence, or by) s +5 272 M +( defining extended attributes for them. The extended attributes) s +5 261 M +( mechanism is recommended for most purposes; additional flags bits) s +5 250 M +( should only be defined by an IETF standards action that also) s +5 239 M +( increments the protocol version number. The use of such new fields) s +5 228 M +( MUST be negotiated by the version number in the protocol exchange.) s +5 217 M +( It is a protocol error if a packet with unsupported protocol bits is) s +5 206 M +( received.) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 12]) s +_R +S +PStoPSsaved restore +%%Page: (12,13) 7 +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 0.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +/showpage{}def/copypage{}def/erasepage{}def +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 13 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +(6. Requests From the Client to the Server) s +5 668 M +( Requests from the client to the server represent the various file) s +5 657 M +( system operations. Each request begins with an `id' field, which is) s +5 646 M +( a 32-bit identifier identifying the request \(selected by the client\).) s +5 635 M +( The same identifier will be returned in the response to the request.) s +5 624 M +( One possible implementation is a monotonically increasing request) s +5 613 M +( sequence number \(modulo 2^32\).) s +5 591 M +( Many operations in the protocol operate on open files. The) s +5 580 M +( SSH_FXP_OPEN request can return a file handle \(which is an opaque) s +5 569 M +( variable-length string\) which may be used to access the file later) s +5 558 M +( \(e.g. in a read operation\). The client MUST NOT send requests the) s +5 547 M +( server with bogus or closed handles. However, the server MUST) s +5 536 M +( perform adequate checks on the handle in order to avoid security) s +5 525 M +( risks due to fabricated handles.) s +5 503 M +( This design allows either stateful and stateless server) s +5 492 M +( implementation, as well as an implementation which caches state) s +5 481 M +( between requests but may also flush it. The contents of the file) s +5 470 M +( handle string are entirely up to the server and its design. The) s +5 459 M +( client should not modify or attempt to interpret the file handle) s +5 448 M +( strings.) s +5 426 M +( The file handle strings MUST NOT be longer than 256 bytes.) s +5 404 M +(6.1 Request Synchronization and Reordering) s +5 382 M +( The protocol and implementations MUST process requests relating to) s +5 371 M +( the same file in the order in which they are received. In other) s +5 360 M +( words, if an application submits multiple requests to the server, the) s +5 349 M +( results in the responses will be the same as if it had sent the) s +5 338 M +( requests one at a time and waited for the response in each case. For) s +5 327 M +( example, the server may process non-overlapping read/write requests) s +5 316 M +( to the same file in parallel, but overlapping reads and writes cannot) s +5 305 M +( be reordered or parallelized. However, there are no ordering) s +5 294 M +( restrictions on the server for processing requests from two different) s +5 283 M +( file transfer connections. The server may interleave and parallelize) s +5 272 M +( them at will.) s +5 250 M +( There are no restrictions on the order in which responses to) s +5 239 M +( outstanding requests are delivered to the client, except that the) s +5 228 M +( server must ensure fairness in the sense that processing of no) s +5 217 M +( request will be indefinitely delayed even if the client is sending) s +5 206 M +( other requests so that there are multiple outstanding requests all) s +5 195 M +( the time.) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 13]) s +_R +S +PStoPSsaved restore +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 421.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 14 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +(6.2 File Names) s +5 668 M +( This protocol represents file names as strings. File names are) s +5 657 M +( assumed to use the slash \('/'\) character as a directory separator.) s +5 635 M +( File names starting with a slash are "absolute", and are relative to) s +5 624 M +( the root of the file system. Names starting with any other character) s +5 613 M +( are relative to the user's default directory \(home directory\). Note) s +5 602 M +( that identifying the user is assumed to take place outside of this) s +5 591 M +( protocol.) s +5 569 M +( Servers SHOULD interpret a path name component ".." as referring to) s +5 558 M +( the parent directory, and "." as referring to the current directory.) s +5 547 M +( If the server implementation limits access to certain parts of the) s +5 536 M +( file system, it must be extra careful in parsing file names when) s +5 525 M +( enforcing such restrictions. There have been numerous reported) s +5 514 M +( security bugs where a ".." in a path name has allowed access outside) s +5 503 M +( the intended area.) s +5 481 M +( An empty path name is valid, and it refers to the user's default) s +5 470 M +( directory \(usually the user's home directory\).) s +5 448 M +( Otherwise, no syntax is defined for file names by this specification.) s +5 437 M +( Clients should not make any other assumptions; however, they can) s +5 426 M +( splice path name components returned by SSH_FXP_READDIR together) s +5 415 M +( using a slash \('/'\) as the separator, and that will work as expected.) s +5 393 M +( In order to comply with IETF Policy on Character Sets and Languages) s +5 382 M +( [2], all filenames are to be encoded in UTF-8. The shortest valid) s +5 371 M +( UTF-8 encoding of the UNICODE data MUST be used. The server is) s +5 360 M +( responsible for converting the UNICODE data to whatever canonical) s +5 349 M +( form it requires.) s +5 327 M +( For example, if the server requires that precomposed characters) s +5 316 M +( always be used, the server MUST NOT assume the filename as sent by) s +5 305 M +( the client has this attribute, but must do this normalization itself.) s +5 283 M +( It is understood that the lack of well-defined semantics for file) s +5 272 M +( names may cause interoperability problems between clients and servers) s +5 261 M +( using radically different operating systems. However, this approach) s +5 250 M +( is known to work acceptably with most systems, and alternative) s +5 239 M +( approaches that e.g. treat file names as sequences of structured) s +5 228 M +( components are quite complicated.) s +5 206 M +(6.3 Opening, Creating, and Closing Files) s +5 184 M +( Files are opened and created using the SSH_FXP_OPEN message, whose) s +5 173 M +( data part is as follows:) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 14]) s +_R +S +PStoPSsaved restore +%%Page: (14,15) 8 +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 0.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +/showpage{}def/copypage{}def/erasepage{}def +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 15 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +( uint32 id) s +5 679 M +( string filename [UTF-8]) s +5 668 M +( uint32 pflags) s +5 657 M +( ATTRS attrs) s +5 635 M +( The `id' field is the request identifier as for all requests.) s +5 613 M +( The `filename' field specifies the file name. See Section ``File) s +5 602 M +( Names'' for more information.) s +5 580 M +( The `pflags' field is a bitmask. The following bits have been) s +5 569 M +( defined.) s +5 547 M +( #define SSH_FXF_READ 0x00000001) s +5 536 M +( #define SSH_FXF_WRITE 0x00000002) s +5 525 M +( #define SSH_FXF_APPEND 0x00000004) s +5 514 M +( #define SSH_FXF_CREAT 0x00000008) s +5 503 M +( #define SSH_FXF_TRUNC 0x00000010) s +5 492 M +( #define SSH_FXF_EXCL 0x00000020) s +5 481 M +( #define SSH_FXF_TEXT 0x00000040) s +5 459 M +( These have the following meanings:) s +5 437 M +( SSH_FXF_READ) s +5 426 M +( Open the file for reading.) s +5 404 M +( SSH_FXF_WRITE) s +5 393 M +( Open the file for writing. If both this and SSH_FXF_READ are) s +5 382 M +( specified, the file is opened for both reading and writing.) s +5 360 M +( SSH_FXF_APPEND) s +5 349 M +( Force all writes to append data at the end of the file. The) s +5 338 M +( offset parameter to write will be ignored.) s +5 316 M +( SSH_FXF_CREAT) s +5 305 M +( If this flag is specified, then a new file will be created if one) s +5 294 M +( does not already exist \(if O_TRUNC is specified, the new file will) s +5 283 M +( be truncated to zero length if it previously exists\).) s +5 261 M +( SSH_FXF_TRUNC) s +5 250 M +( Forces an existing file with the same name to be truncated to zero) s +5 239 M +( length when creating a file by specifying SSH_FXF_CREAT.) s +5 228 M +( SSH_FXF_CREAT MUST also be specified if this flag is used.) s +5 206 M +( SSH_FXF_EXCL) s +5 195 M +( Causes the request to fail if the named file already exists.) s +5 184 M +( SSH_FXF_CREAT MUST also be specified if this flag is used.) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 15]) s +_R +S +PStoPSsaved restore +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 421.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 16 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +( SSH_FXF_TEXT) s +5 679 M +( Indicates that the server should treat the file as text and) s +5 668 M +( convert it to the canonical newline convention in use. \(See) s +5 657 M +( Determining Server Newline Convention. \(Section 4.3\)) s +5 635 M +( When a file is opened with the FXF_TEXT flag, the offset field in) s +5 624 M +( both the read and write function are ignored.) s +5 602 M +( Servers MUST correctly process multiple parallel reads and writes) s +5 591 M +( correctly in this mode. Naturally, it is permissible for them to) s +5 580 M +( do this by serializing the requests. It would not be possible for) s +5 569 M +( a client to reliably detect a server that does not implement) s +5 558 M +( parallel writes in time to prevent damage.) s +5 536 M +( Clients SHOULD use the SSH_FXF_APPEND flag to append data to a) s +5 525 M +( text file rather then using write with a calculated offset.) s +5 503 M +( To support seeks on text file the following SSH_FXP_EXTENDED) s +5 492 M +( packet is defined.) s +5 448 M +( string "text-seek") s +5 437 M +( string file-handle) s +5 426 M +( uint64 line-number) s +5 404 M +( line-number is the index of the line number to seek to, where byte) s +5 393 M +( 0 in the file is line number 0, and the byte directly following) s +5 382 M +( the first newline sequence in the file is line number 1 and so on.) s +5 360 M +( The response to a "text-seek" request is an SSH_FXP_STATUS) s +5 349 M +( message.) s +5 327 M +( An attempt to seek past the end-of-file should result in a) s +5 316 M +( SSH_FX_EOF status.) s +5 294 M +( Servers SHOULD support at least one "text-seek" in order to) s +5 283 M +( support resume. However, a client MUST be prepared to receive) s +5 272 M +( SSH_FX_OP_UNSUPPORTED when attempting a "text-seek" operation.) s +5 261 M +( The client can then try a fall-back strategy, if it has one.) s +5 239 M +( Clients MUST be prepared to handle SSH_FX_OP_UNSUPPORTED returned) s +5 228 M +( for read or write operations that are not sequential.) s +5 206 M +( The `attrs' field specifies the initial attributes for the file.) s +5 195 M +( Default values will be used for those attributes that are not) s +5 184 M +( specified. See Section ``File Attributes'' for more information.) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 16]) s +_R +S +PStoPSsaved restore +%%Page: (16,17) 9 +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 0.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +/showpage{}def/copypage{}def/erasepage{}def +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 17 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +( The response to this message will be either SSH_FXP_HANDLE \(if the) s +5 679 M +( operation is successful\) or SSH_FXP_STATUS \(if the operation fails\).) s +5 657 M +( A file is closed by using the SSH_FXP_CLOSE request. Its data field) s +5 646 M +( has the following format:) s +5 624 M +( uint32 id) s +5 613 M +( string handle) s +5 591 M +( where `id' is the request identifier, and `handle' is a handle) s +5 580 M +( previously returned in the response to SSH_FXP_OPEN or) s +5 569 M +( SSH_FXP_OPENDIR. The handle becomes invalid immediately after this) s +5 558 M +( request has been sent.) s +5 536 M +( The response to this request will be a SSH_FXP_STATUS message. One) s +5 525 M +( should note that on some server platforms even a close can fail.) s +5 514 M +( This can happen e.g. if the server operating system caches writes,) s +5 503 M +( and an error occurs while flushing cached writes during the close.) s +5 481 M +(6.4 Reading and Writing) s +5 459 M +( Once a file has been opened, it can be read using the SSH_FXP_READ) s +5 448 M +( message, which has the following format:) s +5 426 M +( uint32 id) s +5 415 M +( string handle) s +5 404 M +( uint64 offset) s +5 393 M +( uint32 len) s +5 371 M +( where `id' is the request identifier, `handle' is an open file handle) s +5 360 M +( returned by SSH_FXP_OPEN, `offset' is the offset \(in bytes\) relative) s +5 349 M +( to the beginning of the file from where to start reading, and `len') s +5 338 M +( is the maximum number of bytes to read.) s +5 316 M +( In response to this request, the server will read as many bytes as it) s +5 305 M +( can from the file \(up to `len'\), and return them in a SSH_FXP_DATA) s +5 294 M +( message. If an error occurs or EOF is encountered before reading any) s +5 283 M +( data, the server will respond with SSH_FXP_STATUS. For normal disk) s +5 272 M +( files, it is guaranteed that this will read the specified number of) s +5 261 M +( bytes, or up to end of file. For e.g. device files this may return) s +5 250 M +( fewer bytes than requested.) s +5 228 M +( Writing to a file is achieved using the SSH_FXP_WRITE message, which) s +5 217 M +( has the following format:) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 17]) s +_R +S +PStoPSsaved restore +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 421.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 18 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +( uint32 id) s +5 679 M +( string handle) s +5 668 M +( uint64 offset) s +5 657 M +( string data) s +5 635 M +( where `id' is a request identifier, `handle' is a file handle) s +5 624 M +( returned by SSH_FXP_OPEN, `offset' is the offset \(in bytes\) from the) s +5 613 M +( beginning of the file where to start writing, and `data' is the data) s +5 602 M +( to be written.) s +5 580 M +( The write will extend the file if writing beyond the end of the file.) s +5 569 M +( It is legal to write way beyond the end of the file; the semantics) s +5 558 M +( are to write zeroes from the end of the file to the specified offset) s +5 547 M +( and then the data. On most operating systems, such writes do not) s +5 536 M +( allocate disk space but instead leave "holes" in the file.) s +5 514 M +( The server responds to a write request with a SSH_FXP_STATUS message.) s +5 492 M +(6.5 Removing and Renaming Files) s +5 470 M +( Files can be removed using the SSH_FXP_REMOVE message. It has the) s +5 459 M +( following format:) s +5 437 M +( uint32 id) s +5 426 M +( string filename [UTF-8]) s +5 404 M +( where `id' is the request identifier and `filename' is the name of) s +5 393 M +( the file to be removed. See Section ``File Names'' for more) s +5 382 M +( information. This request cannot be used to remove directories.) s +5 360 M +( The server will respond to this request with a SSH_FXP_STATUS) s +5 349 M +( message.) s +5 327 M +( Files \(and directories\) can be renamed using the SSH_FXP_RENAME) s +5 316 M +( message. Its data is as follows:) s +5 294 M +( uint32 id) s +5 283 M +( string oldpath [UTF-8]) s +5 272 M +( string newpath [UTF-8]) s +5 250 M +( where `id' is the request identifier, `oldpath' is the name of an) s +5 239 M +( existing file or directory, and `newpath' is the new name for the) s +5 228 M +( file or directory. It is an error if there already exists a file) s +5 217 M +( with the name specified by newpath. The server may also fail rename) s +5 206 M +( requests in other situations, for example if `oldpath' and `newpath') s +5 195 M +( point to different file systems on the server.) s +5 173 M +( The server will respond to this request with a SSH_FXP_STATUS) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 18]) s +_R +S +PStoPSsaved restore +%%Page: (18,19) 10 +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 0.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +/showpage{}def/copypage{}def/erasepage{}def +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 19 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +( message.) s +5 668 M +(6.6 Creating and Deleting Directories) s +5 646 M +( New directories can be created using the SSH_FXP_MKDIR request. It) s +5 635 M +( has the following format:) s +5 613 M +( uint32 id) s +5 602 M +( string path [UTF-8]) s +5 591 M +( ATTRS attrs) s +5 569 M +( where `id' is the request identifier.) s +5 547 M +( `path' specifies the directory to be created. See Section ``File) s +5 536 M +( Names'' for more information on file names.) s +5 514 M +( `attrs' specifies the attributes that should be applied to it upon) s +5 503 M +( creation. Attributes are discussed in more detail in Section ``File) s +5 492 M +( Attributes''.) s +5 470 M +( The server will respond to this request with a SSH_FXP_STATUS) s +5 459 M +( message. If a file or directory with the specified path already) s +5 448 M +( exists, an error will be returned.) s +5 426 M +( Directories can be removed using the SSH_FXP_RMDIR request, which has) s +5 415 M +( the following format:) s +5 393 M +( uint32 id) s +5 382 M +( string path [UTF-8]) s +5 360 M +( where `id' is the request identifier, and `path' specifies the) s +5 349 M +( directory to be removed. See Section ``File Names'' for more) s +5 338 M +( information on file names.) s +5 316 M +( The server responds to this request with a SSH_FXP_STATUS message.) s +5 305 M +( Errors may be returned from this operation for various reasons,) s +5 294 M +( including, but not limited to, the path does not exist, the path does) s +5 283 M +( not refer to a directory object, the directory is not empty, or the) s +5 272 M +( user has insufficient access or permission to perform the requested) s +5 261 M +( operation.) s +5 239 M +(6.7 Scanning Directories) s +5 217 M +( The files in a directory can be listed using the SSH_FXP_OPENDIR and) s +5 206 M +( SSH_FXP_READDIR requests. Each SSH_FXP_READDIR request returns one) s +5 195 M +( or more file names with full file attributes for each file. The) s +5 184 M +( client should call SSH_FXP_READDIR repeatedly until it has found the) s +5 173 M +( file it is looking for or until the server responds with a) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 19]) s +_R +S +PStoPSsaved restore +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 421.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 20 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +( SSH_FXP_STATUS message indicating an error \(normally SSH_FX_EOF if) s +5 679 M +( there are no more files in the directory\). The client should then) s +5 668 M +( close the handle using the SSH_FXP_CLOSE request.) s +5 646 M +( The SSH_FXP_OPENDIR opens a directory for reading. It has the) s +5 635 M +( following format:) s +5 613 M +( uint32 id) s +5 602 M +( string path [UTF-8]) s +5 580 M +( where `id' is the request identifier and `path' is the path name of) s +5 569 M +( the directory to be listed \(without any trailing slash\). See Section) s +5 558 M +( ``File Names'' for more information on file names. This will return) s +5 547 M +( an error if the path does not specify a directory or if the directory) s +5 536 M +( is not readable. The server will respond to this request with either) s +5 525 M +( a SSH_FXP_HANDLE or a SSH_FXP_STATUS message.) s +5 503 M +( Once the directory has been successfully opened, files \(and) s +5 492 M +( directories\) contained in it can be listed using SSH_FXP_READDIR) s +5 481 M +( requests. These are of the format) s +5 459 M +( uint32 id) s +5 448 M +( string handle) s +5 426 M +( where `id' is the request identifier, and `handle' is a handle) s +5 415 M +( returned by SSH_FXP_OPENDIR. \(It is a protocol error to attempt to) s +5 404 M +( use an ordinary file handle returned by SSH_FXP_OPEN.\)) s +5 382 M +( The server responds to this request with either a SSH_FXP_NAME or a) s +5 371 M +( SSH_FXP_STATUS message. One or more names may be returned at a time.) s +5 360 M +( Full status information is returned for each name in order to speed) s +5 349 M +( up typical directory listings.) s +5 327 M +( If there are no more names available to be read, the server MUST) s +5 316 M +( respond with a SSH_FXP_STATUS message with error code of SSH_FX_EOF.) s +5 294 M +( When the client no longer wishes to read more names from the) s +5 283 M +( directory, it SHOULD call SSH_FXP_CLOSE for the handle. The handle) s +5 272 M +( should be closed regardless of whether an error has occurred or not.) s +5 250 M +(6.8 Retrieving File Attributes) s +5 228 M +( Very often, file attributes are automatically returned by) s +5 217 M +( SSH_FXP_READDIR. However, sometimes there is need to specifically) s +5 206 M +( retrieve the attributes for a named file. This can be done using the) s +5 195 M +( SSH_FXP_STAT, SSH_FXP_LSTAT and SSH_FXP_FSTAT requests.) s +5 173 M +( SSH_FXP_STAT and SSH_FXP_LSTAT only differ in that SSH_FXP_STAT) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 20]) s +_R +S +PStoPSsaved restore +%%Page: (20,21) 11 +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 0.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +/showpage{}def/copypage{}def/erasepage{}def +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 21 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +( follows symbolic links on the server, whereas SSH_FXP_LSTAT does not) s +5 679 M +( follow symbolic links. Both have the same format:) s +5 657 M +( uint32 id) s +5 646 M +( string path [UTF-8]) s +5 635 M +( uint32 flags) s +5 613 M +( where `id' is the request identifier, and `path' specifies the file) s +5 602 M +( system object for which status is to be returned. The server) s +5 591 M +( responds to this request with either SSH_FXP_ATTRS or SSH_FXP_STATUS.) s +5 569 M +( The flags field specify the attribute flags in which the client has) s +5 558 M +( particular interest. This is a hint to the server. For example,) s +5 547 M +( because retrieving owner / group and acl information can be an) s +5 536 M +( expensive operation under some operating systems, the server may) s +5 525 M +( choose not to retrieve this information unless the client expresses a) s +5 514 M +( specific interest in it.) s +5 492 M +( The client has no guarantee the server will provide all the fields) s +5 481 M +( that it has expressed an interest in.) s +5 459 M +( SSH_FXP_FSTAT differs from the others in that it returns status) s +5 448 M +( information for an open file \(identified by the file handle\). Its) s +5 437 M +( format is as follows:) s +5 415 M +( uint32 id) s +5 404 M +( string handle) s +5 393 M +( uint32 flags) s +5 371 M +( where `id' is the request identifier and `handle' is a file handle) s +5 360 M +( returned by SSH_FXP_OPEN. The server responds to this request with) s +5 349 M +( SSH_FXP_ATTRS or SSH_FXP_STATUS.) s +5 327 M +(6.9 Setting File Attributes) s +5 305 M +( File attributes may be modified using the SSH_FXP_SETSTAT and) s +5 294 M +( SSH_FXP_FSETSTAT requests. These requests are used for operations) s +5 283 M +( such as changing the ownership, permissions or access times, as well) s +5 272 M +( as for truncating a file.) s +5 250 M +( The SSH_FXP_SETSTAT request is of the following format:) s +5 228 M +( uint32 id) s +5 217 M +( string path [UTF-8]) s +5 206 M +( ATTRS attrs) s +5 184 M +( where `id' is the request identifier, `path' specifies the file) s +5 173 M +( system object \(e.g. file or directory\) whose attributes are to be) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 21]) s +_R +S +PStoPSsaved restore +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 421.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 22 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +( modified, and `attrs' specifies the modifications to be made to its) s +5 679 M +( attributes. Attributes are discussed in more detail in Section) s +5 668 M +( ``File Attributes''.) s +5 646 M +( An error will be returned if the specified file system object does) s +5 635 M +( not exist or the user does not have sufficient rights to modify the) s +5 624 M +( specified attributes. The server responds to this request with a) s +5 613 M +( SSH_FXP_STATUS message.) s +5 591 M +( The SSH_FXP_FSETSTAT request modifies the attributes of a file which) s +5 580 M +( is already open. It has the following format:) s +5 558 M +( uint32 id) s +5 547 M +( string handle) s +5 536 M +( ATTRS attrs) s +5 514 M +( where `id' is the request identifier, `handle' \(MUST be returned by) s +5 503 M +( SSH_FXP_OPEN\) identifies the file whose attributes are to be) s +5 492 M +( modified, and `attrs' specifies the modifications to be made to its) s +5 481 M +( attributes. Attributes are discussed in more detail in Section) s +5 470 M +( ``File Attributes''. The server will respond to this request with) s +5 459 M +( SSH_FXP_STATUS.) s +5 437 M +(6.10 Dealing with Symbolic links) s +5 415 M +( The SSH_FXP_READLINK request may be used to read the target of a) s +5 404 M +( symbolic link. It would have a data part as follows:) s +5 382 M +( uint32 id) s +5 371 M +( string path [UTF-8]) s +5 349 M +( where `id' is the request identifier and `path' specifies the path) s +5 338 M +( name of the symlink to be read.) s +5 316 M +( The server will respond with a SSH_FXP_NAME packet containing only) s +5 305 M +( one name and a dummy attributes value. The name in the returned) s +5 294 M +( packet contains the target of the link. If an error occurs, the) s +5 283 M +( server may respond with SSH_FXP_STATUS.) s +5 261 M +( The SSH_FXP_SYMLINK request will create a symbolic link on the) s +5 250 M +( server. It is of the following format) s +5 228 M +( uint32 id) s +5 217 M +( string linkpath [UTF-8]) s +5 206 M +( string targetpath [UTF-8]) s +5 184 M +( where `id' is the request identifier, `linkpath' specifies the path) s +5 173 M +( name of the symlink to be created and `targetpath' specifies the) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 22]) s +_R +S +PStoPSsaved restore +%%Page: (22,23) 12 +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 0.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +/showpage{}def/copypage{}def/erasepage{}def +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 23 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +( target of the symlink. The server shall respond with a) s +5 679 M +( SSH_FXP_STATUS indicating either success \(SSH_FX_OK\) or an error) s +5 668 M +( condition.) s +5 646 M +(6.11 Canonicalizing the Server-Side Path Name) s +5 624 M +( The SSH_FXP_REALPATH request can be used to have the server) s +5 613 M +( canonicalize any given path name to an absolute path. This is useful) s +5 602 M +( for converting path names containing ".." components or relative) s +5 591 M +( pathnames without a leading slash into absolute paths. The format of) s +5 580 M +( the request is as follows:) s +5 558 M +( uint32 id) s +5 547 M +( string path [UTF-8]) s +5 525 M +( where `id' is the request identifier and `path' specifies the path) s +5 514 M +( name to be canonicalized. The server will respond with a) s +5 503 M +( SSH_FXP_NAME packet containing the name in canonical form and a dummy) s +5 492 M +( attributes value. If an error occurs, the server may also respond) s +5 481 M +( with SSH_FXP_STATUS.) s +5 459 M +(6.11.1 Best practice for dealing with paths) s +5 437 M +( The client SHOULD treat the results of SSH_FXP_REALPATH as a) s +5 426 M +( canonical absolute path, even if the path does not appear to be) s +5 415 M +( absolute. A client that use REALPATH\("."\) and treats the result as) s +5 404 M +( absolute, even if there is no leading slash, will continue to) s +5 393 M +( function correctly, even when talking to a Windows NT or VMS style) s +5 382 M +( system, where absolute paths may not begin with a slash.) s +5 360 M +( For example, if the client wishes to change directory up, and the) s +5 349 M +( server has returned "c:/x/y/z" from REALPATH, the client SHOULD use) s +5 338 M +( "c:/x/y/z/..".) s +5 316 M +( As a second example, if the client wishes to open the file "x.txt" in) s +5 305 M +( the current directory, and server has returned "dka100:/x/y/z" as the) s +5 294 M +( canonical path of the directory, the client SHOULD open "dka100:/x/y/) s +5 283 M +( z/x.txt") s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 23]) s +_R +S +PStoPSsaved restore +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 421.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 24 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +(7. Responses from the Server to the Client) s +5 668 M +( The server responds to the client using one of a few response) s +5 657 M +( packets. All requests can return a SSH_FXP_STATUS response upon) s +5 646 M +( failure. When the operation is successful, any of the responses may) s +5 635 M +( be returned \(depending on the operation\). If no data needs to be) s +5 624 M +( returned to the client, the SSH_FXP_STATUS response with SSH_FX_OK) s +5 613 M +( status is appropriate. Otherwise, the SSH_FXP_HANDLE message is used) s +5 602 M +( to return a file handle \(for SSH_FXP_OPEN and SSH_FXP_OPENDIR) s +5 591 M +( requests\), SSH_FXP_DATA is used to return data from SSH_FXP_READ,) s +5 580 M +( SSH_FXP_NAME is used to return one or more file names from a) s +5 569 M +( SSH_FXP_READDIR or SSH_FXP_REALPATH request, and SSH_FXP_ATTRS is) s +5 558 M +( used to return file attributes from SSH_FXP_STAT, SSH_FXP_LSTAT, and) s +5 547 M +( SSH_FXP_FSTAT requests.) s +5 525 M +( Exactly one response will be returned for each request. Each) s +5 514 M +( response packet contains a request identifier which can be used to) s +5 503 M +( match each response with the corresponding request. Note that it is) s +5 492 M +( legal to have several requests outstanding simultaneously, and the) s +5 481 M +( server is allowed to send responses to them in a different order from) s +5 470 M +( the order in which the requests were sent \(the result of their) s +5 459 M +( execution, however, is guaranteed to be as if they had been processed) s +5 448 M +( one at a time in the order in which the requests were sent\).) s +5 426 M +( Response packets are of the same general format as request packets.) s +5 415 M +( Each response packet begins with the request identifier.) s +5 393 M +( The format of the data portion of the SSH_FXP_STATUS response is as) s +5 382 M +( follows:) s +5 360 M +( uint32 id) s +5 349 M +( uint32 error/status code) s +5 338 M +( string error message \(ISO-10646 UTF-8 [RFC-2279]\)) s +5 327 M +( string language tag \(as defined in [RFC-1766]\)) s +5 305 M +( where `id' is the request identifier, and `error/status code') s +5 294 M +( indicates the result of the requested operation. The value SSH_FX_OK) s +5 283 M +( indicates success, and all other values indicate failure.) s +5 261 M +( Currently, the following values are defined \(other values may be) s +5 250 M +( defined by future versions of this protocol\):) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 24]) s +_R +S +PStoPSsaved restore +%%Page: (24,25) 13 +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 0.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +/showpage{}def/copypage{}def/erasepage{}def +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 25 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +( #define SSH_FX_OK 0) s +5 679 M +( #define SSH_FX_EOF 1) s +5 668 M +( #define SSH_FX_NO_SUCH_FILE 2) s +5 657 M +( #define SSH_FX_PERMISSION_DENIED 3) s +5 646 M +( #define SSH_FX_FAILURE 4) s +5 635 M +( #define SSH_FX_BAD_MESSAGE 5) s +5 624 M +( #define SSH_FX_NO_CONNECTION 6) s +5 613 M +( #define SSH_FX_CONNECTION_LOST 7) s +5 602 M +( #define SSH_FX_OP_UNSUPPORTED 8) s +5 591 M +( #define SSH_FX_INVALID_HANDLE 9) s +5 580 M +( #define SSH_FX_NO_SUCH_PATH 10) s +5 569 M +( #define SSH_FX_FILE_ALREADY_EXISTS 11) s +5 558 M +( #define SSH_FX_WRITE_PROTECT 12) s +5 536 M +( SSH_FX_OK) s +5 525 M +( Indicates successful completion of the operation.) s +5 503 M +( SSH_FX_EOF) s +5 492 M +( indicates end-of-file condition; for SSH_FX_READ it means that no) s +5 481 M +( more data is available in the file, and for SSH_FX_READDIR it) s +5 470 M +( indicates that no more files are contained in the directory.) s +5 448 M +( SSH_FX_NO_SUCH_FILE) s +5 437 M +( is returned when a reference is made to a file which does not) s +5 426 M +( exist.) s +5 404 M +( SSH_FX_PERMISSION_DENIED) s +5 393 M +( is returned when the authenticated user does not have sufficient) s +5 382 M +( permissions to perform the operation.) s +5 360 M +( SSH_FX_FAILURE) s +5 349 M +( is a generic catch-all error message; it should be returned if an) s +5 338 M +( error occurs for which there is no more specific error code) s +5 327 M +( defined.) s +5 305 M +( SSH_FX_BAD_MESSAGE) s +5 294 M +( may be returned if a badly formatted packet or protocol) s +5 283 M +( incompatibility is detected.) s +5 261 M +( SSH_FX_NO_CONNECTION) s +5 250 M +( is a pseudo-error which indicates that the client has no) s +5 239 M +( connection to the server \(it can only be generated locally by the) s +5 228 M +( client, and MUST NOT be returned by servers\).) s +5 206 M +( SSH_FX_CONNECTION_LOST) s +5 195 M +( is a pseudo-error which indicates that the connection to the) s +5 184 M +( server has been lost \(it can only be generated locally by the) s +5 173 M +( client, and MUST NOT be returned by servers\).) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 25]) s +_R +S +PStoPSsaved restore +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 421.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 26 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +( SSH_FX_OP_UNSUPPORTED) s +5 679 M +( indicates that an attempt was made to perform an operation which) s +5 668 M +( is not supported for the server \(it may be generated locally by) s +5 657 M +( the client if e.g. the version number exchange indicates that a) s +5 646 M +( required feature is not supported by the server, or it may be) s +5 635 M +( returned by the server if the server does not implement an) s +5 624 M +( operation\).) s +5 602 M +( SSH_FX_INVALID_HANDLE) s +5 591 M +( The handle value was invalid.) s +5 569 M +( SSH_FX_NO_SUCH_PATH) s +5 558 M +( The file path does not exist or is invalid.) s +5 536 M +( SSH_FX_FILE_ALREADY_EXISTS) s +5 525 M +( The file already exists.) s +5 503 M +( SSH_FX_WRITE_PROTECT) s +5 492 M +( The file is on read only media, or the media is write protected.) s +5 470 M +( The SSH_FXP_HANDLE response has the following format:) s +5 448 M +( uint32 id) s +5 437 M +( string handle) s +5 415 M +( where `id' is the request identifier, and `handle' is an arbitrary) s +5 404 M +( string that identifies an open file or directory on the server. The) s +5 393 M +( handle is opaque to the client; the client MUST NOT attempt to) s +5 382 M +( interpret or modify it in any way. The length of the handle string) s +5 371 M +( MUST NOT exceed 256 data bytes.) s +5 349 M +( The SSH_FXP_DATA response has the following format:) s +5 327 M +( uint32 id) s +5 316 M +( string data) s +5 294 M +( where `id' is the request identifier, and `data' is an arbitrary byte) s +5 283 M +( string containing the requested data. The data string may be at most) s +5 272 M +( the number of bytes requested in a SSH_FXP_READ request, but may also) s +5 261 M +( be shorter if end of file is reached or if the read is from something) s +5 250 M +( other than a regular file.) s +5 228 M +( The SSH_FXP_NAME response has the following format:) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 26]) s +_R +S +PStoPSsaved restore +%%Page: (26,27) 14 +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 0.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +/showpage{}def/copypage{}def/erasepage{}def +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 27 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +( uint32 id) s +5 679 M +( uint32 count) s +5 668 M +( repeats count times:) s +5 657 M +( string filename [UTF-8]) s +5 646 M +( ATTRS attrs) s +5 624 M +( where `id' is the request identifier, `count' is the number of names) s +5 613 M +( returned in this response, and the remaining fields repeat `count') s +5 602 M +( times \(so that all three fields are first included for the first) s +5 591 M +( file, then for the second file, etc\). In the repeated part,) s +5 580 M +( `filename' is a file name being returned \(for SSH_FXP_READDIR, it) s +5 569 M +( will be a relative name within the directory, without any path) s +5 558 M +( components; for SSH_FXP_REALPATH it will be an absolute path name\),) s +5 547 M +( and `attrs' is the attributes of the file as described in Section) s +5 536 M +( ``File Attributes''.) s +5 514 M +( The SSH_FXP_ATTRS response has the following format:) s +5 492 M +( uint32 id) s +5 481 M +( ATTRS attrs) s +5 459 M +( where `id' is the request identifier, and `attrs' is the returned) s +5 448 M +( file attributes as described in Section ``File Attributes''.) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 27]) s +_R +S +PStoPSsaved restore +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 421.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 28 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +(8. Vendor-Specific Extensions) s +5 668 M +( The SSH_FXP_EXTENDED request provides a generic extension mechanism) s +5 657 M +( for adding vendor-specific commands. The request has the following) s +5 646 M +( format:) s +5 624 M +( uint32 id) s +5 613 M +( string extended-request) s +5 602 M +( ... any request-specific data ...) s +5 580 M +( where `id' is the request identifier, and `extended-request' is a) s +5 569 M +( string of the format "name@domain", where domain is an internet) s +5 558 M +( domain name of the vendor defining the request. The rest of the) s +5 547 M +( request is completely vendor-specific, and servers should only) s +5 536 M +( attempt to interpret it if they recognize the `extended-request') s +5 525 M +( name.) s +5 503 M +( The server may respond to such requests using any of the response) s +5 492 M +( packets defined in Section ``Responses from the Server to the) s +5 481 M +( Client''. Additionally, the server may also respond with a) s +5 470 M +( SSH_FXP_EXTENDED_REPLY packet, as defined below. If the server does) s +5 459 M +( not recognize the `extended-request' name, then the server MUST) s +5 448 M +( respond with SSH_FXP_STATUS with error/status set to) s +5 437 M +( SSH_FX_OP_UNSUPPORTED.) s +5 415 M +( The SSH_FXP_EXTENDED_REPLY packet can be used to carry arbitrary) s +5 404 M +( extension-specific data from the server to the client. It is of the) s +5 393 M +( following format:) s +5 371 M +( uint32 id) s +5 360 M +( ... any request-specific data ...) s +5 338 M +( There is a range of packet types reserved for use by extensions. In) s +5 327 M +( order to avoid collision, extensions that turn on the use of) s +5 316 M +( additional packet types should determine those numbers dynamically.) s +5 294 M +( The suggested way of doing this is have an extension request from the) s +5 283 M +( client to the server that enables the extension; the extension) s +5 272 M +( response from the server to the client would specify the actual type) s +5 261 M +( values to use, in additional to any other data.) s +5 239 M +( Extension authors should be mindful of the limited range of packet) s +5 228 M +( types available \(there are only 45 values available\) and avoid) s +5 217 M +( requiring a new packet type where possible.) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 28]) s +_R +S +PStoPSsaved restore +%%Page: (28,29) 15 +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 0.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +/showpage{}def/copypage{}def/erasepage{}def +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 29 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +(9. Security Considerations) s +5 668 M +( This protocol assumes that it is run over a secure channel and that) s +5 657 M +( the endpoints of the channel have been authenticated. Thus, this) s +5 646 M +( protocol assumes that it is externally protected from network-level) s +5 635 M +( attacks.) s +5 613 M +( This protocol provides file system access to arbitrary files on the) s +5 602 M +( server \(only constrained by the server implementation\). It is the) s +5 591 M +( responsibility of the server implementation to enforce any access) s +5 580 M +( controls that may be required to limit the access allowed for any) s +5 569 M +( particular user \(the user being authenticated externally to this) s +5 558 M +( protocol, typically using the SSH User Authentication Protocol [8].) s +5 536 M +( Care must be taken in the server implementation to check the validity) s +5 525 M +( of received file handle strings. The server should not rely on them) s +5 514 M +( directly; it MUST check the validity of each handle before relying on) s +5 503 M +( it.) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 29]) s +_R +S +PStoPSsaved restore +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 421.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 30 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +(10. Changes from previous protocol versions) s +5 668 M +( The SSH File Transfer Protocol has changed over time, before it's) s +5 657 M +( standardization. The following is a description of the incompatible) s +5 646 M +( changes between different versions.) s +5 624 M +(10.1 Changes between versions 4 and 3) s +5 602 M +( Many of the changes between version 4 and version 3 are to the) s +5 591 M +( attribute structure to make it more flexible for non-unix platforms.) s +5 569 M +( o Make all filenames UTF-8.) s +5 547 M +( o Added 'newline' extension.) s +5 525 M +( o Made file attribute owner and group strings so they can actually) s +5 514 M +( be used on disparate systems.) s +5 492 M +( o Added createtime field, and added separate flags for atime,) s +5 481 M +( createtime, and mtime so they can be set separately.) s +5 459 M +( o Split the file type out of the permissions field and into it's own) s +5 448 M +( field \(which is always present.\)) s +5 426 M +( o Added acl attribute.) s +5 404 M +( o Added SSH_FXF_TEXT file open flag.) s +5 382 M +( o Added flags field to the get stat commands so that the client can) s +5 371 M +( specifically request information the server might not normally) s +5 360 M +( included for performance reasons.) s +5 338 M +( o Removed the long filename from the names structure-- it can now be) s +5 327 M +( built from information available in the attrs structure.) s +5 305 M +( o Added reserved range of packet numbers for extensions.) s +5 283 M +( o Added several additional error codes.) s +5 261 M +( o Change the way version negotiate works slightly. Previously, if) s +5 250 M +( the client version were higher than the server version, the server) s +5 239 M +( was supposed to 'echo back' the clients version. The server now) s +5 228 M +( sends it's own version and the lower of the two is considered to) s +5 217 M +( be the one in use.) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 30]) s +_R +S +PStoPSsaved restore +%%Page: (30,31) 16 +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 0.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +/showpage{}def/copypage{}def/erasepage{}def +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 31 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +(10.2 Changes between versions 3 and 2) s +5 668 M +( o The SSH_FXP_READLINK and SSH_FXP_SYMLINK messages were added.) s +5 646 M +( o The SSH_FXP_EXTENDED and SSH_FXP_EXTENDED_REPLY messages were) s +5 635 M +( added.) s +5 613 M +( o The SSH_FXP_STATUS message was changed to include fields `error) s +5 602 M +( message' and `language tag'.) s +5 569 M +(10.3 Changes between versions 2 and 1) s +5 547 M +( o The SSH_FXP_RENAME message was added.) s +5 514 M +(10.4 Changes between versions 1 and 0) s +5 492 M +( o Implementation changes, no actual protocol changes.) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 31]) s +_R +S +PStoPSsaved restore +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 421.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 32 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +(11. Trademark Issues) s +5 668 M +( "ssh" is a registered trademark of SSH Communications Security Corp) s +5 657 M +( in the United States and/or other countries.) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 32]) s +_R +S +PStoPSsaved restore +%%Page: (32,33) 17 +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 0.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +/showpage{}def/copypage{}def/erasepage{}def +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 33 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +(References) s +5 668 M +( [1] Dierks, T., Allen, C., Treese, W., Karlton, P., Freier, A. and) s +5 657 M +( P. Kocher, "The TLS Protocol Version 1.0", RFC 2246, January) s +5 646 M +( 1999.) s +5 624 M +( [2] Alvestrand, H., "IETF Policy on Character Sets and Languages",) s +5 613 M +( BCP 18, RFC 2277, January 1998.) s +5 591 M +( [3] Shepler, S., Callaghan, B., Robinson, D., Thurlow, R., Beame,) s +5 580 M +( C., Eisler, M. and D. Noveck, "NFS version 4 Protocol", RFC) s +5 569 M +( 3010, December 2000.) s +5 547 M +( [4] Institute of Electrical and Electronics Engineers, "Information) s +5 536 M +( Technology - Portable Operating System Interface \(POSIX\) - Part) s +5 525 M +( 1: System Application Program Interface \(API\) [C Language]",) s +5 514 M +( IEEE Standard 1003.2, 1996.) s +5 492 M +( [5] Rinne, T., Ylonen, T., Kivinen, T., Saarinen, M. and S.) s +5 481 M +( Lehtinen, "SSH Protocol Architecture", draft-ietf-secsh-) s +5 470 M +( architecture-13 \(work in progress\), September 2002.) s +5 448 M +( [6] Rinne, T., Ylonen, T., Kivinen, T., Saarinen, M. and S.) s +5 437 M +( Lehtinen, "SSH Protocol Transport Protocol", draft-ietf-secsh-) s +5 426 M +( transport-15 \(work in progress\), September 2002.) s +5 404 M +( [7] Rinne, T., Ylonen, T., Kivinen, T., Saarinen, M. and S.) s +5 393 M +( Lehtinen, "SSH Connection Protocol", draft-ietf-secsh-connect-16) s +5 382 M +( \(work in progress\), September 2002.) s +5 360 M +( [8] Rinne, T., Ylonen, T., Kivinen, T., Saarinen, M. and S.) s +5 349 M +( Lehtinen, "SSH Authentication Protocol", draft-ietf-secsh-) s +5 338 M +( userauth-16 \(work in progress\), September 2002.) s +5 305 M +(Authors' Addresses) s +5 283 M +( Joseph Galbraith) s +5 272 M +( VanDyke Software) s +5 261 M +( 4848 Tramway Ridge Blvd) s +5 250 M +( Suite 101) s +5 239 M +( Albuquerque, NM 87111) s +5 228 M +( US) s +5 206 M +( Phone: +1 505 332 5700) s +5 195 M +( EMail: [email protected]) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 33]) s +_R +S +PStoPSsaved restore +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 421.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 34 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +( Tatu Ylonen) s +5 679 M +( SSH Communications Security Corp) s +5 668 M +( Fredrikinkatu 42) s +5 657 M +( HELSINKI FIN-00100) s +5 646 M +( Finland) s +5 624 M +( EMail: [email protected]) s +5 591 M +( Sami Lehtinen) s +5 580 M +( SSH Communications Security Corp) s +5 569 M +( Fredrikinkatu 42) s +5 558 M +( HELSINKI FIN-00100) s +5 547 M +( Finland) s +5 525 M +( EMail: [email protected]) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 34]) s +_R +S +PStoPSsaved restore +%%Page: (34,35) 18 +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 0.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +/showpage{}def/copypage{}def/erasepage{}def +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 35 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +5 723 M +(Internet-Draft SSH File Transfer Protocol October 2002) s +5 690 M +(Full Copyright Statement) s +5 668 M +( Copyright \(C\) The Internet Society \(2002\). All Rights Reserved.) s +5 646 M +( This document and translations of it may be copied and furnished to) s +5 635 M +( others, and derivative works that comment on or otherwise explain it) s +5 624 M +( or assist in its implementation may be prepared, copied, published) s +5 613 M +( and distributed, in whole or in part, without restriction of any) s +5 602 M +( kind, provided that the above copyright notice and this paragraph are) s +5 591 M +( included on all such copies and derivative works. However, this) s +5 580 M +( document itself may not be modified in any way, such as by removing) s +5 569 M +( the copyright notice or references to the Internet Society or other) s +5 558 M +( Internet organizations, except as needed for the purpose of) s +5 547 M +( developing Internet standards in which case the procedures for) s +5 536 M +( copyrights defined in the Internet Standards process must be) s +5 525 M +( followed, or as required to translate it into languages other than) s +5 514 M +( English.) s +5 492 M +( The limited permissions granted above are perpetual and will not be) s +5 481 M +( revoked by the Internet Society or its successors or assigns.) s +5 459 M +( This document and the information contained herein is provided on an) s +5 448 M +( "AS IS" basis and THE INTERNET SOCIETY AND THE INTERNET ENGINEERING) s +5 437 M +( TASK FORCE DISCLAIMS ALL WARRANTIES, EXPRESS OR IMPLIED, INCLUDING) s +5 426 M +( BUT NOT LIMITED TO ANY WARRANTY THAT THE USE OF THE INFORMATION) s +5 415 M +( HEREIN WILL NOT INFRINGE ANY RIGHTS OR ANY IMPLIED WARRANTIES OF) s +5 404 M +( MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.) s +5 382 M +(Acknowledgement) s +5 360 M +( Funding for the RFC Editor function is currently provided by the) s +5 349 M +( Internet Society.) s +5 129 M +(Galbraith, et al. Expires April 16, 2003 [Page 35]) s +_R +S +PStoPSsaved restore +userdict/PStoPSsaved save put +PStoPSmatrix setmatrix +595.000000 421.271378 translate +90 rotate +0.706651 dup scale +userdict/PStoPSmatrix matrix currentmatrix put +userdict/PStoPSclip{0 0 moveto + 595.000000 0 rlineto 0 842.000000 rlineto -595.000000 0 rlineto + closepath}put initclip +PStoPSxform concat +%%BeginPageSetup +_S +75 0 translate +/pagenum 36 def +/fname () def +/fdir () def +/ftail () def +/user_header_p false def +%%EndPageSetup +_R +S +PStoPSsaved restore +%%Trailer +%%Pages: 36 +%%DocumentNeededResources: font Courier-Bold Courier +%%EOF |