aboutsummaryrefslogtreecommitdiffstats
path: root/lib/ssh/doc
diff options
context:
space:
mode:
Diffstat (limited to 'lib/ssh/doc')
-rw-r--r--lib/ssh/doc/src/ssh.xml12
-rw-r--r--lib/ssh/doc/src/ssh_sftp.xml2
-rw-r--r--lib/ssh/doc/src/using_ssh.xml109
3 files changed, 63 insertions, 60 deletions
diff --git a/lib/ssh/doc/src/ssh.xml b/lib/ssh/doc/src/ssh.xml
index 6f1c2bcba3..d49d3ac2a7 100644
--- a/lib/ssh/doc/src/ssh.xml
+++ b/lib/ssh/doc/src/ssh.xml
@@ -41,6 +41,7 @@
<item>Supported SSH version is 2.0.</item>
<item>Supported MAC algorithms: hmac-sha2-256 and hmac-sha1.</item>
<item>Supported encryption algorithms: aes128-ctr, aes128-cb and 3des-cbc.</item>
+ <item>Supported key exchange algorithms: diffie-hellman-group1-sha1.</item>
<item>Supports unicode filenames if the emulator and the underlaying OS support it.
See section DESCRIPTION in the
<seealso marker="kernel:file">file</seealso> manual page in <c>kernel</c>
@@ -105,9 +106,9 @@
<d><c><![CDATA[22]]></c> is default, the assigned well-known port
number for SSH.</d>
<v>Options = [{Option, Value}]</v>
- <v>Timeout = infinity | integer(milliseconds)</v>
- <d>Negotiation time-out. For connection time-out, use option
- <c>{connect_timeout, timeout()}</c>.</d>
+ <v>Timeout = infinity | integer()</v>
+ <d>Negotiation time-out in milli-seconds. The default value is <c>infinity</c>.
+ For connection time-out, use option <c>{connect_timeout, timeout()}</c>.</d>
</type>
<desc>
<p>Connects to an SSH server. No channel is started. This is done
@@ -176,7 +177,8 @@
<tag><c><![CDATA[{connect_timeout, timeout()}]]></c></tag>
<item>
<p>Sets a time-out on the transport layer
- connection. Defaults to <c>infinity</c>.</p>
+ connection. For <c>gen_tcp</c> the time is in milli-seconds and the default value is
+ <c>infinity</c>.</p>
</item>
<tag><c><![CDATA[{user, string()}]]></c></tag>
<item>
@@ -238,7 +240,7 @@
<v>Value = [option_value()] </v>
<v>option_value() = {{Major::integer(), Minor::integer()}, VersionString::string()} |
User::string() | Peer::{inet:hostname(), {inet::ip_adress(), inet::port_number()}} |
- Sockname::{inet::ip_adress(), inet::port_number()} () </v>
+ Sockname::{inet::ip_adress(), inet::port_number()}</v>
</type>
<desc>
<p>Retrieves information about a connection.</p>
diff --git a/lib/ssh/doc/src/ssh_sftp.xml b/lib/ssh/doc/src/ssh_sftp.xml
index 4ed5a38de4..1a3705b341 100644
--- a/lib/ssh/doc/src/ssh_sftp.xml
+++ b/lib/ssh/doc/src/ssh_sftp.xml
@@ -46,7 +46,7 @@
<tag><c>ssh_connection_ref()</c></tag>
<item><p>Opaque to the user, returned by <c>ssh:connect/3</c></p></item>
<tag><c>timeout()</c></tag>
- <item><p>= <c>infinity | integer() in milliseconds</c></p></item>
+ <item><p>= <c>infinity | integer() in milliseconds. Default infinity.</c></p></item>
</taglist>
</section>
diff --git a/lib/ssh/doc/src/using_ssh.xml b/lib/ssh/doc/src/using_ssh.xml
index 9da839d072..cd7b64ac43 100644
--- a/lib/ssh/doc/src/using_ssh.xml
+++ b/lib/ssh/doc/src/using_ssh.xml
@@ -102,8 +102,8 @@
<code type="erl">
1> ssh:start().
ok
- 2> {ok, Sshd} = ssh:daemon(8989, [{system_dir, "/tmp/ssh_daemon"},
- {user_dir, "/tmp/otptest_user/.ssh"}]).
+ 2> {ok, Sshd} = ssh:daemon(8989, [{system_dir, "/tmp/ssh_daemon"},
+ {user_dir, "/tmp/otptest_user/.ssh"}]).
{ok,&lt;0.54.0>}
3>
</code>
@@ -154,8 +154,8 @@
<note><p>The number of received messages in this example depends on which OS
and which shell that is used on the machine running the <c>ssh</c> daemon.
- See also <seealso marker="ssh_connection#exec-4">ssh_connection:exec/4</seealso>
- </p>.</note>
+ See also <seealso marker="ssh_connection#exec-4">ssh_connection:exec/4</seealso>.
+ </p></note>
<p>Do a one-time execution of a remote command over <c>ssh</c>:</p>
@@ -194,9 +194,10 @@
<code type="erl" >
1> ssh:start().
ok
- 2> ssh:daemon(8989, [{system_dir, "/tmp/ssh_daemon"},
- {user_dir, "/tmp/otptest_user/.ssh"},
- {subsystems, [ssh_sftpd:subsystem_spec([{cwd, "/tmp/sftp/example"}])]}]).
+ 2> ssh:daemon(8989, [{system_dir, "/tmp/ssh_daemon"},
+ {user_dir, "/tmp/otptest_user/.ssh"},
+ {subsystems, [ssh_sftpd:subsystem_spec([{cwd, "/tmp/sftp/example"}])
+ ]}]).
{ok,&lt;0.54.0>}
3>
</code>
@@ -248,50 +249,50 @@
<p>The previous write and read example can be extended with encryption and decryption as follows:</p>
<code type="erlang">
- %% First three parameters depending on which crypto type we select:
- Key = &lt;&lt;"This is a 256 bit key. abcdefghi">>,
- Ivec0 = crypto:rand_bytes(16),
- DataSize = 1024, % DataSize rem 16 = 0 for aes_cbc
-
- %% Initialization of the CryptoState, in this case it is the Ivector.
- InitFun = fun() -> {ok, Ivec0, DataSize} end,
-
- %% How to encrypt:
- EncryptFun =
- fun(PlainBin,Ivec) ->
- EncryptedBin = crypto:block_encrypt(aes_cbc256, Key, Ivec, PlainBin),
- {ok, EncryptedBin, crypto:next_iv(aes_cbc,EncryptedBin)}
- end,
-
- %% What to do with the very last block:
- CloseFun =
- fun(PlainBin, Ivec) ->
- EncryptedBin = crypto:block_encrypt(aes_cbc256, Key, Ivec,
- pad(16,PlainBin) %% Last chunk
- ),
- {ok, EncryptedBin}
- end,
-
- Cw = {InitFun,EncryptFun,CloseFun},
- {ok,HandleWrite} = ssh_sftp:open_tar(ChannelPid, ?tar_file_name, [write,{crypto,Cw}]),
- ok = erl_tar:add(HandleWrite, .... ),
- ok = erl_tar:add(HandleWrite, .... ),
- ...
- ok = erl_tar:add(HandleWrite, .... ),
- ok = erl_tar:close(HandleWrite),
-
- %% And for decryption (in this crypto example we could use the same InitFun
- %% as for encryption):
- DecryptFun =
- fun(EncryptedBin,Ivec) ->
- PlainBin = crypto:block_decrypt(aes_cbc256, Key, Ivec, EncryptedBin),
- {ok, PlainBin, crypto:next_iv(aes_cbc,EncryptedBin)}
- end,
-
- Cr = {InitFun,DecryptFun},
- {ok,HandleRead} = ssh_sftp:open_tar(ChannelPid, ?tar_file_name, [read,{crypto,Cw}]),
- {ok,NameValueList} = erl_tar:extract(HandleRead,[memory]),
- ok = erl_tar:close(HandleRead),
+%% First three parameters depending on which crypto type we select:
+Key = &lt;&lt;"This is a 256 bit key. abcdefghi">>,
+Ivec0 = crypto:rand_bytes(16),
+DataSize = 1024, % DataSize rem 16 = 0 for aes_cbc
+
+%% Initialization of the CryptoState, in this case it is the Ivector.
+InitFun = fun() -> {ok, Ivec0, DataSize} end,
+
+%% How to encrypt:
+EncryptFun =
+ fun(PlainBin,Ivec) ->
+ EncryptedBin = crypto:block_encrypt(aes_cbc256, Key, Ivec, PlainBin),
+ {ok, EncryptedBin, crypto:next_iv(aes_cbc,EncryptedBin)}
+ end,
+
+%% What to do with the very last block:
+CloseFun =
+ fun(PlainBin, Ivec) ->
+ EncryptedBin = crypto:block_encrypt(aes_cbc256, Key, Ivec,
+ pad(16,PlainBin) %% Last chunk
+ ),
+ {ok, EncryptedBin}
+ end,
+
+Cw = {InitFun,EncryptFun,CloseFun},
+{ok,HandleWrite} = ssh_sftp:open_tar(ChannelPid, ?tar_file_name, [write,{crypto,Cw}]),
+ok = erl_tar:add(HandleWrite, .... ),
+ok = erl_tar:add(HandleWrite, .... ),
+...
+ok = erl_tar:add(HandleWrite, .... ),
+ok = erl_tar:close(HandleWrite),
+
+%% And for decryption (in this crypto example we could use the same InitFun
+%% as for encryption):
+DecryptFun =
+ fun(EncryptedBin,Ivec) ->
+ PlainBin = crypto:block_decrypt(aes_cbc256, Key, Ivec, EncryptedBin),
+ {ok, PlainBin, crypto:next_iv(aes_cbc,EncryptedBin)}
+ end,
+
+Cr = {InitFun,DecryptFun},
+{ok,HandleRead} = ssh_sftp:open_tar(ChannelPid, ?tar_file_name, [read,{crypto,Cw}]),
+{ok,NameValueList} = erl_tar:extract(HandleRead,[memory]),
+ok = erl_tar:close(HandleRead),
</code>
</section>
@@ -360,9 +361,9 @@ terminate(_Reason, _State) ->
<code type="erl" >
1> ssh:start().
ok
- 2> ssh:daemon(8989, [{system_dir, "/tmp/ssh_daemon"},
- {user_dir, "/tmp/otptest_user/.ssh"}
- {subsystems, [{"echo_n", {ssh_echo_server, [10]}}]}]).
+ 2> ssh:daemon(8989, [{system_dir, "/tmp/ssh_daemon"},
+ {user_dir, "/tmp/otptest_user/.ssh"}
+ {subsystems, [{"echo_n", {ssh_echo_server, [10]}}]}]).
{ok,&lt;0.54.0>}
3>
</code>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-27 10:59:59 +0000