diff options
Diffstat (limited to 'lib/ssh/src/ssh_auth.erl')
| -rw-r--r-- | lib/ssh/src/ssh_auth.erl | 592 |
1 files changed, 364 insertions, 228 deletions
diff --git a/lib/ssh/src/ssh_auth.erl b/lib/ssh/src/ssh_auth.erl index 45fd907383..0c378d084b 100644 --- a/lib/ssh/src/ssh_auth.erl +++ b/lib/ssh/src/ssh_auth.erl @@ -1,18 +1,19 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2008-2013. All Rights Reserved. +%% Copyright Ericsson AB 2008-2014. All Rights Reserved. %% -%% The contents of this file are subject to the Erlang Public License, -%% Version 1.1, (the "License"); you may not use this file except in -%% compliance with the License. You should have received a copy of the -%% Erlang Public License along with this software. If not, it can be -%% retrieved online at http://www.erlang.org/. +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at %% -%% Software distributed under the License is distributed on an "AS IS" -%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See -%% the License for the specific language governing rights and limitations -%% under the License. +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. %% %% %CopyrightEnd% %% @@ -30,52 +31,83 @@ -export([publickey_msg/1, password_msg/1, keyboard_interactive_msg/1, service_request_msg/1, init_userauth_request_msg/1, userauth_request_msg/1, handle_userauth_request/3, - handle_userauth_info_request/3, handle_userauth_info_response/2 + handle_userauth_info_request/2, handle_userauth_info_response/2 ]). %%-------------------------------------------------------------------- %%% Internal application API %%-------------------------------------------------------------------- -publickey_msg([Alg, #ssh{user = User, - session_id = SessionId, - service = Service, - opts = Opts} = Ssh]) -> +%%%---------------------------------------------------------------- +userauth_request_msg(#ssh{userauth_methods = ServerMethods, + userauth_supported_methods = UserPrefMethods, % Note: this is not documented as supported for clients + userauth_preference = ClientMethods0 + } = Ssh0) -> + case sort_select_mthds(ClientMethods0, UserPrefMethods, ServerMethods) of + [] -> + Msg = #ssh_msg_disconnect{code = ?SSH_DISCONNECT_NO_MORE_AUTH_METHODS_AVAILABLE, + description = "Unable to connect using the available authentication methods", + language = "en"}, + {disconnect, Msg, ssh_transport:ssh_packet(Msg, Ssh0)}; + + [{Pref,Module,Function,Args} | Prefs] -> + Ssh = case Pref of + "keyboard-interactive" -> Ssh0; + _ -> Ssh0#ssh{userauth_preference = Prefs} + end, + case Module:Function(Args ++ [Ssh]) of + {not_ok, Ssh1} -> + userauth_request_msg(Ssh1#ssh{userauth_preference = Prefs}); + Result -> + {Pref,Result} + end + end. - Hash = sha, %% Maybe option?! - KeyCb = proplists:get_value(key_cb, Opts, ssh_file), - case KeyCb:user_key(Alg, Opts) of - {ok, Key} -> - StrAlgo = algorithm_string(Alg), - PubKeyBlob = encode_public_key(Key), - SigData = build_sig_data(SessionId, - User, Service, PubKeyBlob, StrAlgo), - Sig = ssh_transport:sign(SigData, Hash, Key), - SigBlob = list_to_binary([?string(StrAlgo), ?binary(Sig)]), - ssh_transport:ssh_packet( - #ssh_msg_userauth_request{user = User, - service = Service, - method = "publickey", - data = [?TRUE, - ?string(StrAlgo), - ?binary(PubKeyBlob), - ?binary(SigBlob)]}, - Ssh); - _Error -> - not_ok - end. +sort_select_mthds(Clients, undefined, Servers) -> + %% User has not expressed an opinion via option "auth_methods", use the server's prefs + sort_select_mthds1(Clients, Servers, string:tokens(?SUPPORTED_AUTH_METHODS,",")); + +sort_select_mthds(Clients, Users0, Servers0) -> + %% The User has an opinion, use the intersection of that and the Servers whishes but + %% in the Users order + sort_select_mthds1(Clients, string:tokens(Users0,","), Servers0). + + +sort_select_mthds1(Clients, Users0, Servers0) -> + Servers = unique(Servers0), + Users = unique(Users0), + [C || Key <- Users, + lists:member(Key, Servers), + C <- Clients, + element(1,C) == Key]. + +unique(L) -> + lists:reverse( + lists:foldl(fun(E,Acc) -> + case lists:member(E,Acc) of + true -> Acc; + false -> [E|Acc] + end + end, [], L)). + + +%%%---- userauth_request_msg "callbacks" password_msg([#ssh{opts = Opts, io_cb = IoCb, - user = User, service = Service} = Ssh]) -> - Password = case proplists:get_value(password, Opts) of - undefined -> - user_interaction(IoCb, Ssh); - PW -> - PW - end, + user = User, service = Service} = Ssh0]) -> + {Password,Ssh} = + case proplists:get_value(password, Opts) of + undefined when IoCb == ssh_no_io -> + {not_ok, Ssh0}; + undefined -> + {IoCb:read_password("ssh password: ",Ssh0), Ssh0}; + PW -> + %% If "password" option is given it should not be tried again + {PW, Ssh0#ssh{opts = lists:keyreplace(password,1,Opts,{password,not_ok})}} + end, case Password of not_ok -> - not_ok; + {not_ok, Ssh}; _ -> ssh_transport:ssh_packet( #ssh_msg_userauth_request{user = User, @@ -87,27 +119,60 @@ password_msg([#ssh{opts = Opts, io_cb = IoCb, Ssh) end. -user_interaction(ssh_no_io, _) -> - not_ok; -user_interaction(IoCb, Ssh) -> - IoCb:read_password("ssh password: ", Ssh). - - %% See RFC 4256 for info on keyboard-interactive keyboard_interactive_msg([#ssh{user = User, + opts = Opts, service = Service} = Ssh]) -> - ssh_transport:ssh_packet( - #ssh_msg_userauth_request{user = User, - service = Service, - method = "keyboard-interactive", - data = << ?STRING(<<"">>), - ?STRING(<<>>) >> }, - Ssh). + case proplists:get_value(password, Opts) of + not_ok -> + {not_ok,Ssh}; % No need to use a failed pwd once more + _ -> + ssh_transport:ssh_packet( + #ssh_msg_userauth_request{user = User, + service = Service, + method = "keyboard-interactive", + data = << ?STRING(<<"">>), + ?STRING(<<>>) >> }, + Ssh) + end. + +publickey_msg([Alg, #ssh{user = User, + session_id = SessionId, + service = Service, + opts = Opts} = Ssh]) -> + Hash = sha, %% Maybe option?! + KeyCb = proplists:get_value(key_cb, Opts, ssh_file), + case KeyCb:user_key(Alg, Opts) of + {ok, PrivKey} -> + StrAlgo = atom_to_list(Alg), + case encode_public_key(StrAlgo, ssh_transport:extract_public_key(PrivKey)) of + not_ok -> + {not_ok, Ssh}; + PubKeyBlob -> + SigData = build_sig_data(SessionId, + User, Service, PubKeyBlob, StrAlgo), + Sig = ssh_transport:sign(SigData, Hash, PrivKey), + SigBlob = list_to_binary([?string(StrAlgo), ?binary(Sig)]), + ssh_transport:ssh_packet( + #ssh_msg_userauth_request{user = User, + service = Service, + method = "publickey", + data = [?TRUE, + ?string(StrAlgo), + ?binary(PubKeyBlob), + ?binary(SigBlob)]}, + Ssh) + end; + _Error -> + {not_ok, Ssh} + end. +%%%---------------------------------------------------------------- service_request_msg(Ssh) -> ssh_transport:ssh_packet(#ssh_msg_service_request{name = "ssh-userauth"}, Ssh#ssh{service = "ssh-userauth"}). +%%%---------------------------------------------------------------- init_userauth_request_msg(#ssh{opts = Opts} = Ssh) -> case user_name(Opts) of {ok, User} -> @@ -115,36 +180,21 @@ init_userauth_request_msg(#ssh{opts = Opts} = Ssh) -> service = "ssh-connection", method = "none", data = <<>>}, - case proplists:get_value(pref_public_key_algs, Opts, false) of - false -> - FirstAlg = proplists:get_value(public_key_alg, Opts, ?PREFERRED_PK_ALG), - SecondAlg = other_alg(FirstAlg), - AllowUserInt = proplists:get_value(user_interaction, Opts, true), - Prefs = method_preference(FirstAlg, SecondAlg, AllowUserInt), - ssh_transport:ssh_packet(Msg, Ssh#ssh{user = User, - userauth_preference = Prefs, - userauth_methods = none, - service = "ssh-connection"}); - Algs -> - FirstAlg = lists:nth(1, Algs), - case length(Algs) =:= 2 of - true -> - SecondAlg = other_alg(FirstAlg), - AllowUserInt = proplists:get_value(user_interaction, Opts, true), - Prefs = method_preference(FirstAlg, SecondAlg, AllowUserInt), - ssh_transport:ssh_packet(Msg, Ssh#ssh{user = User, - userauth_preference = Prefs, - userauth_methods = none, - service = "ssh-connection"}); - _ -> - AllowUserInt = proplists:get_value(user_interaction, Opts, true), - Prefs = method_preference(FirstAlg, AllowUserInt), - ssh_transport:ssh_packet(Msg, Ssh#ssh{user = User, - userauth_preference = Prefs, - userauth_methods = none, - service = "ssh-connection"}) - end - end; + Algs0 = proplists:get_value(pref_public_key_algs, Opts, ?SUPPORTED_USER_KEYS), + %% The following line is not strictly correct. The call returns the + %% supported HOST key types while we are interested in USER keys. However, + %% they "happens" to be the same (for now). This could change.... + %% There is no danger as long as the set of user keys is a subset of the set + %% of host keys. + CryptoSupported = ssh_transport:supported_algorithms(public_key), + Algs = [A || A <- Algs0, + lists:member(A, CryptoSupported)], + + Prefs = method_preference(Algs), + ssh_transport:ssh_packet(Msg, Ssh#ssh{user = User, + userauth_preference = Prefs, + userauth_methods = none, + service = "ssh-connection"}); {error, no_user} -> ErrStr = "Could not determine the users name", throw(#ssh_msg_disconnect{code = ?SSH_DISCONNECT_ILLEGAL_USER_NAME, @@ -152,34 +202,9 @@ init_userauth_request_msg(#ssh{opts = Opts} = Ssh) -> language = "en"}) end. -userauth_request_msg(#ssh{userauth_preference = []} = Ssh) -> - Msg = #ssh_msg_disconnect{code = - ?SSH_DISCONNECT_NO_MORE_AUTH_METHODS_AVAILABLE, - description = "Unable to connect using the available" - " authentication methods", - language = "en"}, - {disconnect, Msg, ssh_transport:ssh_packet(Msg, Ssh)}; - -userauth_request_msg(#ssh{userauth_methods = Methods, - userauth_preference = [{Pref, Module, - Function, Args} | Prefs]} - = Ssh0) -> - Ssh = Ssh0#ssh{userauth_preference = Prefs}, - case lists:member(Pref, Methods) of - true -> - case Module:Function(Args ++ [Ssh]) of - not_ok -> - userauth_request_msg(Ssh); - Result -> - Result - end; - false -> - userauth_request_msg(Ssh) - end. - - -handle_userauth_request(#ssh_msg_service_request{name = - Name = "ssh-userauth"}, +%%%---------------------------------------------------------------- +%%% called by server +handle_userauth_request(#ssh_msg_service_request{name = Name = "ssh-userauth"}, _, Ssh) -> {ok, ssh_transport:ssh_packet(#ssh_msg_service_accept{name = Name}, Ssh#ssh{service = "ssh-connection"})}; @@ -187,23 +212,44 @@ handle_userauth_request(#ssh_msg_service_request{name = handle_userauth_request(#ssh_msg_userauth_request{user = User, service = "ssh-connection", method = "password", - data = Data}, _, - #ssh{opts = Opts} = Ssh) -> - <<_:8, ?UINT32(Sz), BinPwd:Sz/binary>> = Data, + data = <<?FALSE, ?UINT32(Sz), BinPwd:Sz/binary>>}, _, + #ssh{opts = Opts, + userauth_supported_methods = Methods} = Ssh) -> Password = unicode:characters_to_list(BinPwd), - case check_password(User, Password, Opts) of - true -> + case check_password(User, Password, Opts, Ssh) of + {true,Ssh1} -> {authorized, User, - ssh_transport:ssh_packet(#ssh_msg_userauth_success{}, Ssh)}; - false -> + ssh_transport:ssh_packet(#ssh_msg_userauth_success{}, Ssh1)}; + {false,Ssh1} -> {not_authorized, {User, {error,"Bad user or password"}}, ssh_transport:ssh_packet(#ssh_msg_userauth_failure{ - authentications = "", - partial_success = false}, Ssh)} + authentications = Methods, + partial_success = false}, Ssh1)} end; handle_userauth_request(#ssh_msg_userauth_request{user = User, service = "ssh-connection", + method = "password", + data = <<?TRUE, + _/binary + %% ?UINT32(Sz1), OldBinPwd:Sz1/binary, + %% ?UINT32(Sz2), NewBinPwd:Sz2/binary + >> + }, _, + #ssh{userauth_supported_methods = Methods} = Ssh) -> + %% Password change without us having sent SSH_MSG_USERAUTH_PASSWD_CHANGEREQ (because we never do) + %% RFC 4252 says: + %% SSH_MSG_USERAUTH_FAILURE without partial success - The password + %% has not been changed. Either password changing was not supported, + %% or the old password was bad. + + {not_authorized, {User, {error,"Password change not supported"}}, + ssh_transport:ssh_packet(#ssh_msg_userauth_failure{ + authentications = Methods, + partial_success = false}, Ssh)}; + +handle_userauth_request(#ssh_msg_userauth_request{user = User, + service = "ssh-connection", method = "none"}, _, #ssh{userauth_supported_methods = Methods} = Ssh) -> {not_authorized, {User, undefined}, @@ -215,7 +261,9 @@ handle_userauth_request(#ssh_msg_userauth_request{user = User, service = "ssh-connection", method = "publickey", data = Data}, - SessionId, #ssh{opts = Opts} = Ssh) -> + SessionId, + #ssh{opts = Opts, + userauth_supported_methods = Methods} = Ssh) -> <<?BYTE(HaveSig), ?UINT32(ALen), BAlg:ALen/binary, ?UINT32(KLen), KeyBlob:KLen/binary, SigWLen/binary>> = Data, Alg = binary_to_list(BAlg), @@ -230,7 +278,7 @@ handle_userauth_request(#ssh_msg_userauth_request{user = User, false -> {not_authorized, {User, undefined}, ssh_transport:ssh_packet(#ssh_msg_userauth_failure{ - authentications="publickey,password", + authentications = Methods, partial_success = false}, Ssh)} end; ?FALSE -> @@ -242,6 +290,64 @@ handle_userauth_request(#ssh_msg_userauth_request{user = User, handle_userauth_request(#ssh_msg_userauth_request{user = User, service = "ssh-connection", + method = "keyboard-interactive", + data = _}, + _, #ssh{opts = Opts, + kb_tries_left = KbTriesLeft, + userauth_supported_methods = Methods} = Ssh) -> + case KbTriesLeft of + N when N<1 -> + {not_authorized, {User, {authmethod, "keyboard-interactive"}}, + ssh_transport:ssh_packet( + #ssh_msg_userauth_failure{authentications = Methods, + partial_success = false}, Ssh)}; + + _ -> + %% RFC4256 + %% The data field contains: + %% - language tag (deprecated). If =/=[] SHOULD use it however. We skip + %% it for simplicity. + %% - submethods. "... the user can give a hint of which actual methods + %% he wants to use. ...". It's a "MAY use" so we skip + %% it. It also needs an understanding between the client + %% and the server. + %% + %% "The server MUST reply with an SSH_MSG_USERAUTH_SUCCESS, + %% SSH_MSG_USERAUTH_FAILURE, or SSH_MSG_USERAUTH_INFO_REQUEST message." + Default = {"SSH server", + "Enter password for \""++User++"\"", + "password: ", + false}, + + {Name, Instruction, Prompt, Echo} = + case proplists:get_value(auth_method_kb_interactive_data, Opts) of + undefined -> + Default; + {_,_,_,_}=V -> + V; + F when is_function(F) -> + {_,PeerName} = Ssh#ssh.peer, + F(PeerName, User, "ssh-connection") + end, + EchoEnc = case Echo of + true -> <<?TRUE>>; + false -> <<?FALSE>> + end, + Msg = #ssh_msg_userauth_info_request{name = unicode:characters_to_list(Name), + instruction = unicode:characters_to_list(Instruction), + language_tag = "", + num_prompts = 1, + data = <<?STRING(unicode:characters_to_binary(Prompt)), + EchoEnc/binary + >> + }, + {not_authorized, {User, undefined}, + ssh_transport:ssh_packet(Msg, Ssh#ssh{user = User + })} + end; + +handle_userauth_request(#ssh_msg_userauth_request{user = User, + service = "ssh-connection", method = Other}, _, #ssh{userauth_supported_methods = Methods} = Ssh) -> {not_authorized, {User, {authmethod, Other}}, @@ -249,22 +355,47 @@ handle_userauth_request(#ssh_msg_userauth_request{user = User, #ssh_msg_userauth_failure{authentications = Methods, partial_success = false}, Ssh)}. -handle_userauth_info_request( - #ssh_msg_userauth_info_request{name = Name, - instruction = Instr, - num_prompts = NumPrompts, - data = Data}, IoCb, - #ssh{opts = Opts} = Ssh) -> + +%%%---------------------------------------------------------------- +%%% keyboard-interactive client +handle_userauth_info_request(#ssh_msg_userauth_info_request{name = Name, + instruction = Instr, + num_prompts = NumPrompts, + data = Data}, + #ssh{opts = Opts, + io_cb = IoCb + } = Ssh) -> PromptInfos = decode_keyboard_interactive_prompts(NumPrompts,Data), - Resps = keyboard_interact_get_responses(IoCb, Opts, - Name, Instr, PromptInfos), - RespBin = list_to_binary( - lists:map(fun(S) -> <<?STRING(list_to_binary(S))>> end, - Resps)), - {ok, - ssh_transport:ssh_packet( - #ssh_msg_userauth_info_response{num_responses = NumPrompts, - data = RespBin}, Ssh)}. + case keyboard_interact_get_responses(IoCb, Opts, Name, Instr, PromptInfos) of + not_ok -> + not_ok; + Responses -> + {ok, + ssh_transport:ssh_packet( + #ssh_msg_userauth_info_response{num_responses = NumPrompts, + data = Responses}, Ssh)} + end. + +%%%---------------------------------------------------------------- +%%% keyboard-interactive server +handle_userauth_info_response(#ssh_msg_userauth_info_response{num_responses = 1, + data = <<?UINT32(Sz), Password:Sz/binary>>}, + #ssh{opts = Opts, + kb_tries_left = KbTriesLeft, + user = User, + userauth_supported_methods = Methods} = Ssh) -> + case check_password(User, unicode:characters_to_list(Password), Opts, Ssh) of + {true,Ssh1} -> + {authorized, User, + ssh_transport:ssh_packet(#ssh_msg_userauth_success{}, Ssh1)}; + {false,Ssh1} -> + {not_authorized, {User, {error,"Bad user or password"}}, + ssh_transport:ssh_packet(#ssh_msg_userauth_failure{ + authentications = Methods, + partial_success = false}, + Ssh1#ssh{kb_tries_left = max(KbTriesLeft-1, 0)} + )} + end; handle_userauth_info_response(#ssh_msg_userauth_info_response{}, _Auth) -> @@ -273,29 +404,18 @@ handle_userauth_info_response(#ssh_msg_userauth_info_response{}, "keyboard-interactive", language = "en"}). + %%-------------------------------------------------------------------- %%% Internal functions %%-------------------------------------------------------------------- -method_preference(Alg1, Alg2, true) -> - [{"publickey", ?MODULE, publickey_msg, [Alg1]}, - {"publickey", ?MODULE, publickey_msg,[Alg2]}, - {"password", ?MODULE, password_msg, []}, - {"keyboard-interactive", ?MODULE, keyboard_interactive_msg, []} - ]; -method_preference(Alg1, Alg2, false) -> - [{"publickey", ?MODULE, publickey_msg, [Alg1]}, - {"publickey", ?MODULE, publickey_msg,[Alg2]}, - {"password", ?MODULE, password_msg, []} - ]. -method_preference(Alg1, true) -> - [{"publickey", ?MODULE, publickey_msg, [Alg1]}, - {"password", ?MODULE, password_msg, []}, - {"keyboard-interactive", ?MODULE, keyboard_interactive_msg, []} - ]; -method_preference(Alg1, false) -> - [{"publickey", ?MODULE, publickey_msg, [Alg1]}, - {"password", ?MODULE, password_msg, []} - ]. +method_preference(Algs) -> + lists:foldr(fun(A, Acc) -> + [{"publickey", ?MODULE, publickey_msg, [A]} | Acc] + end, + [{"password", ?MODULE, password_msg, []}, + {"keyboard-interactive", ?MODULE, keyboard_interactive_msg, []} + ], + Algs). user_name(Opts) -> Env = case os:type() of @@ -316,13 +436,34 @@ user_name(Opts) -> {ok, User} end. -check_password(User, Password, Opts) -> +check_password(User, Password, Opts, Ssh) -> case proplists:get_value(pwdfun, Opts) of undefined -> Static = get_password_option(Opts, User), - Password == Static; - Cheker -> - Cheker(User, Password) + {Password == Static, Ssh}; + + Checker when is_function(Checker,2) -> + {Checker(User, Password), Ssh}; + + Checker when is_function(Checker,4) -> + #ssh{pwdfun_user_state = PrivateState, + peer = {_,PeerAddr={_,_}} + } = Ssh, + case Checker(User, Password, PeerAddr, PrivateState) of + true -> + {true,Ssh}; + false -> + {false,Ssh}; + {true,NewState} -> + {true, Ssh#ssh{pwdfun_user_state=NewState}}; + {false,NewState} -> + {false, Ssh#ssh{pwdfun_user_state=NewState}}; + disconnect -> + throw(#ssh_msg_disconnect{code = ?SSH_DISCONNECT_SERVICE_NOT_AVAILABLE, + description = + "Unable to connect using the available authentication methods", + language = ""}) + end end. get_password_option(Opts, User) -> @@ -359,78 +500,73 @@ build_sig_data(SessionId, User, Service, KeyBlob, Alg) -> ?binary(KeyBlob)], list_to_binary(Sig). -algorithm_string('ssh-rsa') -> - "ssh-rsa"; -algorithm_string('ssh-dss') -> - "ssh-dss". + decode_keyboard_interactive_prompts(_NumPrompts, Data) -> ssh_message:decode_keyboard_interactive_prompts(Data, []). keyboard_interact_get_responses(IoCb, Opts, Name, Instr, PromptInfos) -> NumPrompts = length(PromptInfos), - case proplists:get_value(keyboard_interact_fun, Opts) of - undefined when NumPrompts == 1 -> - %% Special case/fallback for just one prompt - %% (assumed to be the password prompt) - case proplists:get_value(password, Opts) of - undefined -> keyboard_interact(IoCb, Name, Instr, PromptInfos, Opts); - PW -> [PW] - end; - undefined -> - keyboard_interact(IoCb, Name, Instr, PromptInfos, Opts); - KbdInteractFun -> - Prompts = lists:map(fun({Prompt, _Echo}) -> Prompt end, - PromptInfos), - case KbdInteractFun(Name, Instr, Prompts) of - Rs when length(Rs) == NumPrompts -> - Rs; - Rs -> - erlang:error({mismatching_number_of_responses, - {got,Rs}, - {expected,NumPrompts}}) - end - end. + keyboard_interact_get_responses(proplists:get_value(user_interaction, Opts, true), + proplists:get_value(keyboard_interact_fun, Opts), + proplists:get_value(password, Opts, undefined), IoCb, Name, + Instr, PromptInfos, Opts, NumPrompts). + + +keyboard_interact_get_responses(_, _, not_ok, _, _, _, _, _, _) -> + not_ok; +keyboard_interact_get_responses(_, undefined, Password, _, _, _, _, _, + 1) when Password =/= undefined -> + [Password]; %% Password auth implemented with keyboard-interaction and passwd is known +keyboard_interact_get_responses(_, _, _, _, _, _, _, _, 0) -> + []; +keyboard_interact_get_responses(false, undefined, undefined, _, _, _, [Prompt|_], Opts, _) -> + ssh_no_io:read_line(Prompt, Opts); %% Throws error as keyboard interaction is not allowed +keyboard_interact_get_responses(true, undefined, _,IoCb, Name, Instr, PromptInfos, Opts, _) -> + keyboard_interact(IoCb, Name, Instr, PromptInfos, Opts); +keyboard_interact_get_responses(true, Fun, _Pwd, _IoCb, Name, Instr, PromptInfos, _Opts, NumPrompts) -> + keyboard_interact_fun(Fun, Name, Instr, PromptInfos, NumPrompts). keyboard_interact(IoCb, Name, Instr, Prompts, Opts) -> - if Name /= "" -> IoCb:format("~s", [Name]); - true -> ok - end, - if Instr /= "" -> IoCb:format("~s", [Instr]); - true -> ok - end, + write_if_nonempty(IoCb, Name), + write_if_nonempty(IoCb, Instr), lists:map(fun({Prompt, true}) -> IoCb:read_line(Prompt, Opts); ({Prompt, false}) -> IoCb:read_password(Prompt, Opts) end, Prompts). -other_alg('ssh-rsa') -> - 'ssh-dss'; -other_alg('ssh-dss') -> - 'ssh-rsa'. -decode_public_key_v2(<<?UINT32(Len0), _:Len0/binary, - ?UINT32(Len1), BinE:Len1/binary, - ?UINT32(Len2), BinN:Len2/binary>> - ,"ssh-rsa") -> - E = ssh_bits:erlint(Len1, BinE), - N = ssh_bits:erlint(Len2, BinN), - {ok, #'RSAPublicKey'{publicExponent = E, modulus = N}}; -decode_public_key_v2(<<?UINT32(Len0), _:Len0/binary, - ?UINT32(Len1), BinP:Len1/binary, - ?UINT32(Len2), BinQ:Len2/binary, - ?UINT32(Len3), BinG:Len3/binary, - ?UINT32(Len4), BinY:Len4/binary>> - , "ssh-dss") -> - P = ssh_bits:erlint(Len1, BinP), - Q = ssh_bits:erlint(Len2, BinQ), - G = ssh_bits:erlint(Len3, BinG), - Y = ssh_bits:erlint(Len4, BinY), - {ok, {Y, #'Dss-Parms'{p = P, q = Q, g = G}}}; - -decode_public_key_v2(_, _) -> - {error, bad_format}. - -encode_public_key(#'RSAPrivateKey'{publicExponent = E, modulus = N}) -> - ssh_bits:encode(["ssh-rsa",E,N], [string,mpint,mpint]); -encode_public_key(#'DSAPrivateKey'{p = P, q = Q, g = G, y = Y}) -> - ssh_bits:encode(["ssh-dss",P,Q,G,Y], [string,mpint,mpint,mpint,mpint]). +write_if_nonempty(_, "") -> ok; +write_if_nonempty(_, <<>>) -> ok; +write_if_nonempty(IoCb, Text) -> IoCb:format("~s~n",[Text]). + + +keyboard_interact_fun(KbdInteractFun, Name, Instr, PromptInfos, NumPrompts) -> + Prompts = lists:map(fun({Prompt, _Echo}) -> Prompt end, + PromptInfos), + case KbdInteractFun(Name, Instr, Prompts) of + Rs when length(Rs) == NumPrompts -> + Rs; + Rs -> + throw({mismatching_number_of_responses, + {got,Rs}, + {expected, NumPrompts}, + #ssh_msg_disconnect{code = ?SSH_DISCONNECT_SERVICE_NOT_AVAILABLE, + description = "User interaction failed", + language = "en"}}) + end. + +decode_public_key_v2(Bin, _Type) -> + try + public_key:ssh_decode(Bin, ssh2_pubkey) + of + Key -> {ok, Key} + catch + _:_ -> {error, bad_format} + end. + +encode_public_key(_Alg, Key) -> + try + public_key:ssh_encode(Key, ssh2_pubkey) + catch + _:_ -> not_ok + end. |