diff options
Diffstat (limited to 'lib/ssh/src/ssh_connection.erl')
| -rw-r--r-- | lib/ssh/src/ssh_connection.erl | 452 |
1 files changed, 207 insertions, 245 deletions
diff --git a/lib/ssh/src/ssh_connection.erl b/lib/ssh/src/ssh_connection.erl index b377614949..7e9ee78fd2 100644 --- a/lib/ssh/src/ssh_connection.erl +++ b/lib/ssh/src/ssh_connection.erl @@ -1,18 +1,19 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2008-2013. All Rights Reserved. +%% Copyright Ericsson AB 2008-2017. All Rights Reserved. %% -%% The contents of this file are subject to the Erlang Public License, -%% Version 1.1, (the "License"); you may not use this file except in -%% compliance with the License. You should have received a copy of the -%% Erlang Public License along with this software. If not, it can be -%% retrieved online at http://www.erlang.org/. +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at %% -%% Software distributed under the License is distributed on an "AS IS" -%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See -%% the License for the specific language governing rights and limitations -%% under the License. +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. %% %% %CopyrightEnd% %% @@ -32,13 +33,12 @@ %% API -export([session_channel/2, session_channel/4, exec/4, shell/2, subsystem/4, send/3, send/4, send/5, - send_eof/2, adjust_window/3, setenv/5, close/2, reply_request/4]). + send_eof/2, adjust_window/3, setenv/5, close/2, reply_request/4, + ptty_alloc/3, ptty_alloc/4]). %% Potential API currently unsupported and not tested --export([open_pty/3, open_pty/7, - open_pty/9, window_change/4, window_change/6, - direct_tcpip/6, direct_tcpip/8, tcpip_forward/3, - cancel_tcpip_forward/3, signal/3, exit_status/3]). +-export([window_change/4, window_change/6, + signal/3, exit_status/3]). %% Internal application API -export([channel_data/5, handle_msg/3, channel_eof_msg/1, @@ -47,7 +47,7 @@ channel_adjust_window_msg/2, channel_data_msg/3, channel_open_msg/5, channel_open_confirmation_msg/4, channel_open_failure_msg/4, channel_request_msg/4, - global_request_msg/3, request_failure_msg/0, + request_failure_msg/0, request_success_msg/1, bind/4, unbind/3, unbind_channel/2, bound_channel/3, encode_ip/1]). @@ -56,8 +56,8 @@ %%-------------------------------------------------------------------- %%-------------------------------------------------------------------- --spec session_channel(pid(), timeout()) -> {ok, channel_id()} | {error, term()}. --spec session_channel(pid(), integer(), integer(), timeout()) -> {ok, channel_id()} | {error, term()}. +-spec session_channel(connection_ref(), timeout()) -> {ok, channel_id()} | {error, timeout | closed}. +-spec session_channel(connection_ref(), integer(), integer(), timeout()) -> {ok, channel_id()} | {error, timeout | closed}. %% Description: Opens a channel for a ssh session. A session is a %% remote execution of a program. The program may be a shell, an @@ -81,7 +81,8 @@ session_channel(ConnectionHandler, InitialWindowSize, end. %%-------------------------------------------------------------------- --spec exec(pid(), channel_id(), string(), timeout()) -> success | failure. +-spec exec(connection_ref(), channel_id(), string(), timeout()) -> + success | failure | {error, timeout | closed}. %% Description: Will request that the server start the %% execution of the given command. @@ -91,7 +92,7 @@ exec(ConnectionHandler, ChannelId, Command, TimeOut) -> true, [?string(Command)], TimeOut). %%-------------------------------------------------------------------- --spec shell(pid(), channel_id()) -> _. +-spec shell(connection_ref(), channel_id()) -> _. %% Description: Will request that the user's default shell (typically %% defined in /etc/passwd in UNIX systems) be started at the other @@ -101,8 +102,8 @@ shell(ConnectionHandler, ChannelId) -> ssh_connection_handler:request(ConnectionHandler, self(), ChannelId, "shell", false, <<>>, 0). %%-------------------------------------------------------------------- --spec subsystem(pid(), channel_id(), string(), timeout()) -> - success | failure | {error, timeout}. +-spec subsystem(connection_ref(), channel_id(), string(), timeout()) -> + success | failure | {error, timeout | closed}. %% %% Description: Executes a predefined subsystem. %%-------------------------------------------------------------------- @@ -111,11 +112,11 @@ subsystem(ConnectionHandler, ChannelId, SubSystem, TimeOut) -> ChannelId, "subsystem", true, [?string(SubSystem)], TimeOut). %%-------------------------------------------------------------------- --spec send(pid(), channel_id(), iodata()) -> +-spec send(connection_ref(), channel_id(), iodata()) -> ok | {error, closed}. --spec send(pid(), channel_id(), integer()| iodata(), timeout() | iodata()) -> +-spec send(connection_ref(), channel_id(), integer()| iodata(), timeout() | iodata()) -> ok | {error, timeout} | {error, closed}. --spec send(pid(), channel_id(), integer(), iodata(), timeout()) -> +-spec send(connection_ref(), channel_id(), integer(), iodata(), timeout()) -> ok | {error, timeout} | {error, closed}. %% %% @@ -133,7 +134,7 @@ send(ConnectionHandler, ChannelId, Type, Data, TimeOut) -> ssh_connection_handler:send(ConnectionHandler, ChannelId, Type, Data, TimeOut). %%-------------------------------------------------------------------- --spec send_eof(pid(), channel_id()) -> ok | {error, closed}. +-spec send_eof(connection_ref(), channel_id()) -> ok | {error, closed}. %% %% %% Description: Sends eof on the channel <ChannelId>. @@ -142,7 +143,7 @@ send_eof(ConnectionHandler, Channel) -> ssh_connection_handler:send_eof(ConnectionHandler, Channel). %%-------------------------------------------------------------------- --spec adjust_window(pid(), channel_id(), integer()) -> ok. +-spec adjust_window(connection_ref(), channel_id(), integer()) -> ok | {error, closed}. %% %% %% Description: Adjusts the ssh flowcontrol window. @@ -151,7 +152,8 @@ adjust_window(ConnectionHandler, Channel, Bytes) -> ssh_connection_handler:adjust_window(ConnectionHandler, Channel, Bytes). %%-------------------------------------------------------------------- --spec setenv(pid(), channel_id(), string(), string(), timeout()) -> success | failure. +-spec setenv(connection_ref(), channel_id(), string(), string(), timeout()) -> + success | failure | {error, timeout | closed}. %% %% %% Description: Environment variables may be passed to the shell/command to be @@ -163,7 +165,7 @@ setenv(ConnectionHandler, ChannelId, Var, Value, TimeOut) -> %%-------------------------------------------------------------------- --spec close(pid(), channel_id()) -> ok. +-spec close(connection_ref(), channel_id()) -> ok. %% %% %% Description: Sends a close message on the channel <ChannelId>. @@ -172,7 +174,7 @@ close(ConnectionHandler, ChannelId) -> ssh_connection_handler:close(ConnectionHandler, ChannelId). %%-------------------------------------------------------------------- --spec reply_request(pid(), boolean(), success | failure, channel_id()) -> ok. +-spec reply_request(connection_ref(), boolean(), success | failure, channel_id()) -> ok. %% %% %% Description: Send status replies to requests that want such replies. @@ -183,6 +185,30 @@ reply_request(_,false, _, _) -> ok. %%-------------------------------------------------------------------- +-spec ptty_alloc(connection_ref(), channel_id(), proplists:proplist()) -> + success | failiure | {error, closed}. +-spec ptty_alloc(connection_ref(), channel_id(), proplists:proplist(), timeout()) -> + success | failiure | {error, timeout} | {error, closed}. + +%% +%% +%% Description: Sends a ssh connection protocol pty_req. +%%-------------------------------------------------------------------- +ptty_alloc(ConnectionHandler, Channel, Options) -> + ptty_alloc(ConnectionHandler, Channel, Options, infinity). +ptty_alloc(ConnectionHandler, Channel, Options0, TimeOut) -> + TermData = backwards_compatible(Options0, []), % FIXME + {Width, PixWidth} = pty_default_dimensions(width, TermData), + {Height, PixHeight} = pty_default_dimensions(height, TermData), + pty_req(ConnectionHandler, Channel, + proplists:get_value(term, TermData, os:getenv("TERM", ?DEFAULT_TERMINAL)), + proplists:get_value(width, TermData, Width), + proplists:get_value(height, TermData, Height), + proplists:get_value(pixel_widh, TermData, PixWidth), + proplists:get_value(pixel_height, TermData, PixHeight), + proplists:get_value(pty_opts, TermData, []), TimeOut + ). +%%-------------------------------------------------------------------- %% Not yet officialy supported! The following functions are part of the %% initial contributed ssh application. They are untested. Do we want them? %% Should they be documented and tested? @@ -205,69 +231,6 @@ exit_status(ConnectionHandler, Channel, Status) -> ssh_connection_handler:request(ConnectionHandler, Channel, "exit-status", false, [?uint32(Status)], 0). -open_pty(ConnectionHandler, Channel, TimeOut) -> - open_pty(ConnectionHandler, Channel, - os:getenv("TERM"), 80, 24, [], TimeOut). - -open_pty(ConnectionHandler, Channel, Term, Width, Height, PtyOpts, TimeOut) -> - open_pty(ConnectionHandler, Channel, Term, Width, - Height, 0, 0, PtyOpts, TimeOut). - -open_pty(ConnectionHandler, Channel, Term, Width, Height, - PixWidth, PixHeight, PtyOpts, TimeOut) -> - ssh_connection_handler:request(ConnectionHandler, - Channel, "pty-req", true, - [?string(Term), - ?uint32(Width), ?uint32(Height), - ?uint32(PixWidth),?uint32(PixHeight), - encode_pty_opts(PtyOpts)], TimeOut). - -direct_tcpip(ConnectionHandler, RemoteHost, - RemotePort, OrigIP, OrigPort, Timeout) -> - direct_tcpip(ConnectionHandler, RemoteHost, RemotePort, OrigIP, OrigPort, - ?DEFAULT_WINDOW_SIZE, ?DEFAULT_PACKET_SIZE, Timeout). - -direct_tcpip(ConnectionHandler, RemoteIP, RemotePort, OrigIP, OrigPort, - InitialWindowSize, MaxPacketSize, Timeout) -> - case {encode_ip(RemoteIP), encode_ip(OrigIP)} of - {false, _} -> - {error, einval}; - {_, false} -> - {error, einval}; - {RIP, OIP} -> - ssh_connection_handler:open_channel(ConnectionHandler, - "direct-tcpip", - [?string(RIP), - ?uint32(RemotePort), - ?string(OIP), - ?uint32(OrigPort)], - InitialWindowSize, - MaxPacketSize, - Timeout) - end. - -tcpip_forward(ConnectionHandler, BindIP, BindPort) -> - case encode_ip(BindIP) of - false -> - {error, einval}; - IPStr -> - ssh_connection_handler:global_request(ConnectionHandler, - "tcpip-forward", true, - [?string(IPStr), - ?uint32(BindPort)]) - end. - -cancel_tcpip_forward(ConnectionHandler, BindIP, Port) -> - case encode_ip(BindIP) of - false -> - {error, einval}; - IPStr -> - ssh_connection_handler:global_request(ConnectionHandler, - "cancel-tcpip-forward", true, - [?string(IPStr), - ?uint32(Port)]) - end. - %%-------------------------------------------------------------------- %%% Internal API %%-------------------------------------------------------------------- @@ -290,22 +253,11 @@ l2b([]) -> channel_data(ChannelId, DataType, Data, Connection, From) when is_list(Data)-> - channel_data(ChannelId, DataType, -%% list_to_binary(Data), Connection, From); - l2b(Data), Connection, From); - %% try list_to_binary(Data) - %% of - %% B -> B - %% catch - %% _:_ -> io:format('BAD BINARY: ~p~n',[Data]), - %% unicode:characters_to_binary(Data) - %% end, - %% Connection, From); + channel_data(ChannelId, DataType, l2b(Data), Connection, From); channel_data(ChannelId, DataType, Data, #connection{channel_cache = Cache} = Connection, From) -> - case ssh_channel:cache_lookup(Cache, ChannelId) of #channel{remote_id = Id, sent_close = false} = Channel0 -> {SendList, Channel} = @@ -318,13 +270,10 @@ channel_data(ChannelId, DataType, Data, SendDataType, SendData)} end, SendList), - FlowCtrlMsgs = flow_control(Replies, - Channel, - Cache), + FlowCtrlMsgs = flow_control(Replies, Channel, Cache), {{replies, Replies ++ FlowCtrlMsgs}, Connection}; _ -> - gen_fsm:reply(From, {error, closed}), - {noreply, Connection} + {{replies,[{channel_request_reply,From,{error,closed}}]}, Connection} end. handle_msg(#ssh_msg_channel_open_confirmation{recipient_channel = ChannelId, @@ -338,6 +287,9 @@ handle_msg(#ssh_msg_channel_open_confirmation{recipient_channel = ChannelId, ssh_channel:cache_update(Cache, Channel#channel{ remote_id = RemoteId, + recv_packet_size = max(32768, % rfc4254/5.2 + min(PacketSz, Channel#channel.recv_packet_size) + ), send_window_size = WindowSz, send_packet_size = PacketSz}), {Reply, Connection} = reply_msg(Channel, Connection0, {open, ChannelId}), @@ -462,23 +414,38 @@ handle_msg(#ssh_msg_channel_window_adjust{recipient_channel = ChannelId, handle_msg(#ssh_msg_channel_open{channel_type = "session" = Type, sender_channel = RemoteId, initial_window_size = WindowSz, - maximum_packet_size = PacketSz}, Connection0, server) -> - - try setup_session(Connection0, RemoteId, - Type, WindowSz, PacketSz) of - Result -> - Result - catch _:_ -> + maximum_packet_size = PacketSz}, + #connection{options = SSHopts} = Connection0, + server) -> + MinAcceptedPackSz = + ?GET_OPT(minimal_remote_max_packet_size, SSHopts), + + if + MinAcceptedPackSz =< PacketSz -> + try setup_session(Connection0, RemoteId, + Type, WindowSz, PacketSz) of + Result -> + Result + catch _:_ -> + FailMsg = channel_open_failure_msg(RemoteId, + ?SSH_OPEN_CONNECT_FAILED, + "Connection refused", "en"), + {{replies, [{connection_reply, FailMsg}]}, + Connection0} + end; + + MinAcceptedPackSz > PacketSz -> FailMsg = channel_open_failure_msg(RemoteId, - ?SSH_OPEN_CONNECT_FAILED, - "Connection refused", "en"), - {{replies, [{connection_reply, FailMsg}]}, - Connection0} + ?SSH_OPEN_ADMINISTRATIVELY_PROHIBITED, + lists:concat(["Maximum packet size below ",MinAcceptedPackSz, + " not supported"]), "en"), + {{replies, [{connection_reply, FailMsg}]}, Connection0} end; handle_msg(#ssh_msg_channel_open{channel_type = "session", sender_channel = RemoteId}, - Connection, client) -> + Connection, + client) -> %% Client implementations SHOULD reject any session channel open %% requests to make it more difficult for a corrupt server to attack the %% client. See See RFC 4254 6.1. @@ -488,57 +455,6 @@ handle_msg(#ssh_msg_channel_open{channel_type = "session", {{replies, [{connection_reply, FailMsg}]}, Connection}; -handle_msg(#ssh_msg_channel_open{channel_type = "forwarded-tcpip" = Type, - sender_channel = RemoteId, - initial_window_size = RWindowSz, - maximum_packet_size = RPacketSz, - data = Data}, - #connection{channel_cache = Cache} = Connection0, server) -> - <<?UINT32(ALen), Address:ALen/binary, ?UINT32(Port), - ?UINT32(OLen), Orig:OLen/binary, ?UINT32(OrigPort)>> = Data, - - case bound_channel(Address, Port, Connection0) of - undefined -> - FailMsg = channel_open_failure_msg(RemoteId, - ?SSH_OPEN_CONNECT_FAILED, - "Connection refused", "en"), - {{replies, - [{connection_reply, FailMsg}]}, Connection0}; - ChannelPid -> - {ChannelId, Connection1} = new_channel_id(Connection0), - LWindowSz = ?DEFAULT_WINDOW_SIZE, - LPacketSz = ?DEFAULT_PACKET_SIZE, - Channel = #channel{type = Type, - sys = "none", - user = ChannelPid, - local_id = ChannelId, - recv_window_size = LWindowSz, - recv_packet_size = LPacketSz, - send_window_size = RWindowSz, - send_packet_size = RPacketSz}, - ssh_channel:cache_update(Cache, Channel), - OpenConfMsg = channel_open_confirmation_msg(RemoteId, ChannelId, - LWindowSz, LPacketSz), - {OpenMsg, Connection} = - reply_msg(Channel, Connection1, - {open, Channel, {forwarded_tcpip, - decode_ip(Address), Port, - decode_ip(Orig), OrigPort}}), - {{replies, [{connection_reply, OpenConfMsg}, - OpenMsg]}, Connection} - end; - -handle_msg(#ssh_msg_channel_open{channel_type = "forwarded-tcpip", - sender_channel = RemoteId}, - Connection, client) -> - %% Client implementations SHOULD reject direct TCP/IP open requests for - %% security reasons. See RFC 4254 7.2. - FailMsg = channel_open_failure_msg(RemoteId, - ?SSH_OPEN_CONNECT_FAILED, - "Connection refused", "en"), - {{replies, [{connection_reply, FailMsg}]}, Connection}; - - handle_msg(#ssh_msg_channel_open{sender_channel = RemoteId}, Connection, _) -> FailMsg = channel_open_failure_msg(RemoteId, ?SSH_OPEN_ADMINISTRATIVELY_PROHIBITED, @@ -625,7 +541,7 @@ handle_msg(#ssh_msg_channel_request{recipient_channel = ChannelId, ReplyMsg = {subsystem, ChannelId, WantReply, binary_to_list(SsName)}, try - {ok, Pid} = start_subsytem(SsName, Connection, Channel0, ReplyMsg), + {ok, Pid} = start_subsystem(SsName, Connection, Channel0, ReplyMsg), erlang:monitor(process, Pid), Channel = Channel0#channel{user = Pid}, ssh_channel:cache_update(Cache, Channel), @@ -659,7 +575,6 @@ handle_msg(#ssh_msg_channel_request{recipient_channel = ChannelId, PixWidth, PixHeight, decode_pty_opts(Modes)}, Channel = ssh_channel:cache_lookup(Cache, ChannelId), - handle_cli_msg(Connection, Channel, {pty, ChannelId, WantReply, PtyRequest}); @@ -749,11 +664,11 @@ handle_msg(#ssh_msg_global_request{name = _Type, handle_msg(#ssh_msg_request_failure{}, #connection{requests = [{_, From} | Rest]} = Connection, _) -> - {{replies, [{channel_requst_reply, From, {failure, <<>>}}]}, + {{replies, [{channel_request_reply, From, {failure, <<>>}}]}, Connection#connection{requests = Rest}}; handle_msg(#ssh_msg_request_success{data = Data}, #connection{requests = [{_, From} | Rest]} = Connection, _) -> - {{replies, [{channel_requst_reply, From, {success, Data}}]}, + {{replies, [{channel_request_reply, From, {success, Data}}]}, Connection#connection{requests = Rest}}; handle_msg(#ssh_msg_disconnect{code = Code, @@ -776,15 +691,13 @@ handle_cli_msg(#connection{channel_cache = Cache} = Connection, #channel{user = undefined, remote_id = RemoteId, local_id = ChannelId} = Channel0, Reply0) -> - case (catch start_cli(Connection, ChannelId)) of {ok, Pid} -> erlang:monitor(process, Pid), Channel = Channel0#channel{user = Pid}, ssh_channel:cache_update(Cache, Channel), - Reply = {connection_reply, - channel_success_msg(RemoteId)}, - {{replies, [{channel_data, Pid, Reply0}, Reply]}, Connection}; + {Reply, Connection1} = reply_msg(Channel, Connection, Reply0), + {{replies, [Reply]}, Connection1}; _Other -> Reply = {connection_reply, channel_failure_msg(RemoteId)}, @@ -850,10 +763,6 @@ channel_request_msg(ChannelId, Type, WantReply, Data) -> want_reply = WantReply, data = Data}. -global_request_msg(Type, WantReply, Data) -> - #ssh_msg_global_request{name = Type, - want_reply = WantReply, - data = Data}. request_failure_msg() -> #ssh_msg_request_failure{}. @@ -899,18 +808,32 @@ encode_ip(Addr) when is_list(Addr) -> end end. -start_channel(Cb, Id, Args, SubSysSup) -> - start_channel(Cb, Id, Args, SubSysSup, undefined). +start_channel(Cb, Id, Args, SubSysSup, Opts) -> + start_channel(Cb, Id, Args, SubSysSup, undefined, Opts). -start_channel(Cb, Id, Args, SubSysSup, Exec) -> +start_channel(Cb, Id, Args, SubSysSup, Exec, Opts) -> ChildSpec = child_spec(Cb, Id, Args, Exec), ChannelSup = ssh_subsystem_sup:channel_supervisor(SubSysSup), + assert_limit_num_channels_not_exceeded(ChannelSup, Opts), ssh_channel_sup:start_child(ChannelSup, ChildSpec). +assert_limit_num_channels_not_exceeded(ChannelSup, Opts) -> + MaxNumChannels = ?GET_OPT(max_channels, Opts), + NumChannels = length([x || {_,_,worker,[ssh_channel]} <- + supervisor:which_children(ChannelSup)]), + if + %% Note that NumChannels is BEFORE starting a new one + NumChannels < MaxNumChannels -> + ok; + true -> + throw(max_num_channels_exceeded) + end. + %%-------------------------------------------------------------------- %%% Internal functions %%-------------------------------------------------------------------- -setup_session(#connection{channel_cache = Cache} = Connection0, +setup_session(#connection{channel_cache = Cache + } = Connection0, RemoteId, Type, WindowSize, PacketSize) -> {ChannelId, Connection} = new_channel_id(Connection0), @@ -922,6 +845,7 @@ setup_session(#connection{channel_cache = Cache} = Connection0, recv_packet_size = ?DEFAULT_PACKET_SIZE, send_window_size = WindowSize, send_packet_size = PacketSize, + send_buf = queue:new(), remote_id = RemoteId }, ssh_channel:cache_update(Cache, Channel), @@ -933,8 +857,8 @@ setup_session(#connection{channel_cache = Cache} = Connection0, check_subsystem("sftp"= SsName, Options) -> - case proplists:get_value(subsystems, Options, no_subsys) of - no_subsys -> + case ?GET_OPT(subsystems, Options) of + no_subsys -> % FIXME: Can 'no_subsys' ever be matched? {SsName, {Cb, Opts}} = ssh_sftpd:subsystem_spec([]), {Cb, Opts}; SubSystems -> @@ -942,7 +866,7 @@ check_subsystem("sftp"= SsName, Options) -> end; check_subsystem(SsName, Options) -> - Subsystems = proplists:get_value(subsystems, Options, []), + Subsystems = ?GET_OPT(subsystems, Options), case proplists:get_value(SsName, Subsystems, {none, []}) of Fun when is_function(Fun) -> {Fun, []}; @@ -960,17 +884,19 @@ child_spec(Callback, Id, Args, Exec) -> start_cli(#connection{cli_spec = no_cli}, _) -> {error, cli_disabled}; -start_cli(#connection{cli_spec = {CbModule, Args}, exec = Exec, +start_cli(#connection{options = Options, + cli_spec = {CbModule, Args}, + exec = Exec, sub_system_supervisor = SubSysSup}, ChannelId) -> - start_channel(CbModule, ChannelId, Args, SubSysSup, Exec). + start_channel(CbModule, ChannelId, Args, SubSysSup, Exec, Options). -start_subsytem(BinName, #connection{options = Options, +start_subsystem(BinName, #connection{options = Options, sub_system_supervisor = SubSysSup}, #channel{local_id = ChannelId}, _ReplyMsg) -> Name = binary_to_list(BinName), case check_subsystem(Name, Options) of {Callback, Opts} when is_atom(Callback), Callback =/= none -> - start_channel(Callback, ChannelId, Opts, SubSysSup); + start_channel(Callback, ChannelId, Opts, SubSysSup, Options); {Other, _} when Other =/= none -> {error, legacy_option_not_supported} end. @@ -1006,7 +932,7 @@ request_reply_or_data(#channel{local_id = ChannelId, user = ChannelPid}, Connection, Reply) -> case lists:keysearch(ChannelId, 1, Requests) of {value, {ChannelId, From}} -> - {{channel_requst_reply, From, Reply}, + {{channel_request_reply, From, Reply}, Connection#connection{requests = lists:keydelete(ChannelId, 1, Requests)}}; false when (Reply == success) or (Reply == failure) -> @@ -1017,64 +943,97 @@ request_reply_or_data(#channel{local_id = ChannelId, user = ChannelPid}, update_send_window(Channel, _, undefined, #connection{channel_cache = Cache}) -> - do_update_send_window(Channel, Channel#channel.send_buf, Cache); + do_update_send_window(Channel, Cache); -update_send_window(Channel, DataType, Data, +update_send_window(#channel{send_buf = SendBuffer} = Channel, DataType, Data, #connection{channel_cache = Cache}) -> - do_update_send_window(Channel, Channel#channel.send_buf ++ [{DataType, Data}], Cache). + do_update_send_window(Channel#channel{send_buf = queue:in({DataType, Data}, SendBuffer)}, + Cache). -do_update_send_window(Channel0, Buf0, Cache) -> - {Buf1, NewSz, Buf2} = get_window(Buf0, - Channel0#channel.send_packet_size, - Channel0#channel.send_window_size), - - Channel = Channel0#channel{send_window_size = NewSz, send_buf = Buf2}, +do_update_send_window(Channel0, Cache) -> + {SendMsgs, Channel} = get_window(Channel0, []), ssh_channel:cache_update(Cache, Channel), - {Buf1, Channel}. - -get_window(Bs, PSz, WSz) -> - get_window(Bs, PSz, WSz, []). - -get_window(Bs, _PSz, 0, Acc) -> - {lists:reverse(Acc), 0, Bs}; -get_window([B0 = {DataType, Bin} | Bs], PSz, WSz, Acc) -> - BSz = size(Bin), - if BSz =< WSz -> %% will fit into window - if BSz =< PSz -> %% will fit into a packet - get_window(Bs, PSz, WSz-BSz, [B0|Acc]); - true -> %% split into packet size - <<Bin1:PSz/binary, Bin2/binary>> = Bin, - get_window([setelement(2, B0, Bin2) | Bs], - PSz, WSz-PSz, - [{DataType, Bin1}|Acc]) + {SendMsgs, Channel}. + +get_window(#channel{send_window_size = 0 + } = Channel, Acc) -> + {lists:reverse(Acc), Channel}; +get_window(#channel{send_packet_size = 0 + } = Channel, Acc) -> + {lists:reverse(Acc), Channel}; +get_window(#channel{send_buf = Buffer, + send_packet_size = PacketSize, + send_window_size = WindowSize0 + } = Channel, Acc0) -> + case queue:out(Buffer) of + {{value, {_, Data} = Msg}, NewBuffer} -> + case handle_send_window(Msg, size(Data), PacketSize, WindowSize0, Acc0) of + {WindowSize, Acc, {_, <<>>}} -> + {lists:reverse(Acc), Channel#channel{send_window_size = WindowSize, + send_buf = NewBuffer}}; + {WindowSize, Acc, Rest} -> + get_window(Channel#channel{send_window_size = WindowSize, + send_buf = queue:in_r(Rest, NewBuffer)}, Acc) end; - WSz =< PSz -> %% use rest of window - <<Bin1:WSz/binary, Bin2/binary>> = Bin, - get_window([setelement(2, B0, Bin2) | Bs], - PSz, WSz-WSz, - [{DataType, Bin1}|Acc]); - true -> %% use packet size - <<Bin1:PSz/binary, Bin2/binary>> = Bin, - get_window([setelement(2, B0, Bin2) | Bs], - PSz, WSz-PSz, - [{DataType, Bin1}|Acc]) + {empty, NewBuffer} -> + {[], Channel#channel{send_buf = NewBuffer}} + end. + +handle_send_window(Msg = {Type, Data}, Size, PacketSize, WindowSize, Acc) when Size =< WindowSize -> + case Size =< PacketSize of + true -> + {WindowSize - Size, [Msg | Acc], {Type, <<>>}}; + false -> + <<Msg1:PacketSize/binary, Msg2/binary>> = Data, + {WindowSize - PacketSize, [{Type, Msg1} | Acc], {Type, Msg2}} end; -get_window([], _PSz, WSz, Acc) -> - {lists:reverse(Acc), WSz, []}. +handle_send_window({Type, Data}, _, PacketSize, WindowSize, Acc) when WindowSize =< PacketSize -> + <<Msg1:WindowSize/binary, Msg2/binary>> = Data, + {WindowSize - WindowSize, [{Type, Msg1} | Acc], {Type, Msg2}}; +handle_send_window({Type, Data}, _, PacketSize, WindowSize, Acc) -> + <<Msg1:PacketSize/binary, Msg2/binary>> = Data, + {WindowSize - PacketSize, [{Type, Msg1} | Acc], {Type, Msg2}}. flow_control(Channel, Cache) -> flow_control([window_adjusted], Channel, Cache). - + flow_control([], Channel, Cache) -> ssh_channel:cache_update(Cache, Channel), []; - flow_control([_|_], #channel{flow_control = From, - send_buf = []} = Channel, Cache) when From =/= undefined -> - [{flow_control, Cache, Channel, From, ok}]; + send_buf = Buffer} = Channel, Cache) when From =/= undefined -> + case queue:is_empty(Buffer) of + true -> + ssh_channel:cache_update(Cache, Channel#channel{flow_control = undefined}), + [{flow_control, Cache, Channel, From, ok}]; + false -> + [] + end; flow_control(_,_,_) -> - []. + []. +pty_req(ConnectionHandler, Channel, Term, Width, Height, + PixWidth, PixHeight, PtyOpts, TimeOut) -> + ssh_connection_handler:request(ConnectionHandler, + Channel, "pty-req", true, + [?string(Term), + ?uint32(Width), ?uint32(Height), + ?uint32(PixWidth),?uint32(PixHeight), + encode_pty_opts(PtyOpts)], TimeOut). + +pty_default_dimensions(Dimension, TermData) -> + case proplists:get_value(Dimension, TermData, 0) of + N when is_integer(N), N > 0 -> + {N, 0}; + _ -> + PixelDim = list_to_atom("pixel_" ++ atom_to_list(Dimension)), + case proplists:get_value(PixelDim, TermData, 0) of + N when is_integer(N), N > 0 -> + {0, N}; + _ -> + {?TERMINAL_WIDTH, 0} + end + end. encode_pty_opts(Opts) -> Bin = list_to_binary(encode_pty_opts2(Opts)), @@ -1266,9 +1225,12 @@ decode_pty_opts2(<<Code, ?UINT32(Value), Tail/binary>>) -> end, [{Op, Value} | decode_pty_opts2(Tail)]. -decode_ip(Addr) when is_binary(Addr) -> - case inet_parse:address(binary_to_list(Addr)) of - {error,_} -> Addr; - {ok,A} -> A - end. +backwards_compatible([], Acc) -> + Acc; +backwards_compatible([{hight, Value} | Rest], Acc) -> + backwards_compatible(Rest, [{height, Value} | Acc]); +backwards_compatible([{pixel_hight, Value} | Rest], Acc) -> + backwards_compatible(Rest, [{height, Value} | Acc]); +backwards_compatible([Value| Rest], Acc) -> + backwards_compatible(Rest, [ Value | Acc]). |