aboutsummaryrefslogtreecommitdiffstats
path: root/lib/ssh/test/ssh_sftpd_SUITE.erl
diff options
context:
space:
mode:
Diffstat (limited to 'lib/ssh/test/ssh_sftpd_SUITE.erl')
-rw-r--r--lib/ssh/test/ssh_sftpd_SUITE.erl113
1 files changed, 59 insertions, 54 deletions
diff --git a/lib/ssh/test/ssh_sftpd_SUITE.erl b/lib/ssh/test/ssh_sftpd_SUITE.erl
index 45439ce0fa..52a26110c4 100644
--- a/lib/ssh/test/ssh_sftpd_SUITE.erl
+++ b/lib/ssh/test/ssh_sftpd_SUITE.erl
@@ -1,7 +1,7 @@
%%
%% %CopyrightBegin%
%%
-%% Copyright Ericsson AB 2006-2015. All Rights Reserved.
+%% Copyright Ericsson AB 2006-2016. All Rights Reserved.
%%
%% Licensed under the Apache License, Version 2.0 (the "License");
%% you may not use this file except in compliance with the License.
@@ -28,6 +28,7 @@
-include_lib("kernel/include/file.hrl").
-include("ssh_xfer.hrl").
-include("ssh.hrl").
+-include("ssh_test_lib.hrl").
-define(USER, "Alladin").
-define(PASSWD, "Sesame").
@@ -45,7 +46,7 @@
%%--------------------------------------------------------------------
suite() ->
- [{timetrap,{minutes,3}}].
+ [{timetrap,{seconds,40}}].
all() ->
[open_close_file,
@@ -72,19 +73,22 @@ groups() ->
%%--------------------------------------------------------------------
init_per_suite(Config) ->
- DataDir = ?config(data_dir, Config),
- PrivDir = ?config(priv_dir, Config),
- ssh_test_lib:setup_dsa(DataDir, PrivDir),
- %% to make sure we don't use public-key-auth
- %% this should be tested by other test suites
- UserDir = filename:join(?config(priv_dir, Config), nopubkey),
- file:make_dir(UserDir),
- Config.
+ ?CHECK_CRYPTO(
+ begin
+ DataDir = proplists:get_value(data_dir, Config),
+ PrivDir = proplists:get_value(priv_dir, Config),
+ ssh_test_lib:setup_dsa(DataDir, PrivDir),
+ %% to make sure we don't use public-key-auth
+ %% this should be tested by other test suites
+ UserDir = filename:join(proplists:get_value(priv_dir, Config), nopubkey),
+ file:make_dir(UserDir),
+ Config
+ end).
end_per_suite(Config) ->
- SysDir = ?config(priv_dir, Config),
+ SysDir = proplists:get_value(priv_dir, Config),
ssh_test_lib:clean_dsa(SysDir),
- UserDir = filename:join(?config(priv_dir, Config), nopubkey),
+ UserDir = filename:join(proplists:get_value(priv_dir, Config), nopubkey),
file:del_dir(UserDir),
ssh:stop().
@@ -101,11 +105,10 @@ end_per_group(_GroupName, Config) ->
init_per_testcase(TestCase, Config) ->
ssh:start(),
prep(Config),
- PrivDir = ?config(priv_dir, Config),
+ PrivDir = proplists:get_value(priv_dir, Config),
ClientUserDir = filename:join(PrivDir, nopubkey),
- SystemDir = filename:join(?config(priv_dir, Config), system),
+ SystemDir = filename:join(proplists:get_value(priv_dir, Config), system),
- Port = ssh_test_lib:inet_port(node()),
Options = [{system_dir, SystemDir},
{user_dir, PrivDir},
{user_passwords,[{?USER, ?PASSWD}]},
@@ -113,11 +116,13 @@ init_per_testcase(TestCase, Config) ->
{ok, Sftpd} = case TestCase of
ver6_basic ->
SubSystems = [ssh_sftpd:subsystem_spec([{sftpd_vsn, 6}])],
- ssh:daemon(Port, [{subsystems, SubSystems}|Options]);
+ ssh:daemon(0, [{subsystems, SubSystems}|Options]);
_ ->
SubSystems = [ssh_sftpd:subsystem_spec([])],
- ssh:daemon(Port, [{subsystems, SubSystems}|Options])
+ ssh:daemon(0, [{subsystems, SubSystems}|Options])
end,
+ {ok,Dinf} = ssh:daemon_info(Sftpd),
+ Port = proplists:get_value(port, Dinf),
Cm = ssh_test_lib:connect(Port,
[{user_dir, ClientUserDir},
@@ -153,8 +158,8 @@ init_per_testcase(TestCase, Config) ->
[{sftp, {Cm, Channel}}, {sftpd, Sftpd }| Config].
end_per_testcase(_TestCase, Config) ->
- ssh_sftpd:stop(?config(sftpd, Config)),
- {Cm, Channel} = ?config(sftp, Config),
+ ssh_sftpd:stop(proplists:get_value(sftpd, Config)),
+ {Cm, Channel} = proplists:get_value(sftp, Config),
ssh_connection:close(Cm, Channel),
ssh:close(Cm),
ssh:stop().
@@ -165,9 +170,9 @@ end_per_testcase(_TestCase, Config) ->
open_close_file() ->
[{doc, "Test SSH_FXP_OPEN and SSH_FXP_CLOSE commands"}].
open_close_file(Config) when is_list(Config) ->
- PrivDir = ?config(priv_dir, Config),
+ PrivDir = proplists:get_value(priv_dir, Config),
FileName = filename:join(PrivDir, "test.txt"),
- {Cm, Channel} = ?config(sftp, Config),
+ {Cm, Channel} = proplists:get_value(sftp, Config),
ReqId = 0,
{ok, <<?SSH_FXP_HANDLE, ?UINT32(ReqId), Handle/binary>>, _} =
@@ -195,9 +200,9 @@ open_close_file(Config) when is_list(Config) ->
ver3_open_flags() ->
[{doc, "Test open flags"}].
ver3_open_flags(Config) when is_list(Config) ->
- PrivDir = ?config(priv_dir, Config),
+ PrivDir = proplists:get_value(priv_dir, Config),
FileName = filename:join(PrivDir, "not_exist.txt"),
- {Cm, Channel} = ?config(sftp, Config),
+ {Cm, Channel} = proplists:get_value(sftp, Config),
ReqId = 0,
{ok, <<?SSH_FXP_HANDLE, ?UINT32(ReqId), Handle/binary>>, _} =
@@ -229,8 +234,8 @@ ver3_open_flags(Config) when is_list(Config) ->
open_close_dir() ->
[{doc,"Test SSH_FXP_OPENDIR and SSH_FXP_CLOSE commands"}].
open_close_dir(Config) when is_list(Config) ->
- PrivDir = ?config(priv_dir, Config),
- {Cm, Channel} = ?config(sftp, Config),
+ PrivDir = proplists:get_value(priv_dir, Config),
+ {Cm, Channel} = proplists:get_value(sftp, Config),
FileName = filename:join(PrivDir, "test.txt"),
ReqId = 0,
@@ -256,11 +261,11 @@ open_close_dir(Config) when is_list(Config) ->
read_file() ->
[{doc, "Test SSH_FXP_READ command"}].
read_file(Config) when is_list(Config) ->
- PrivDir = ?config(priv_dir, Config),
+ PrivDir = proplists:get_value(priv_dir, Config),
FileName = filename:join(PrivDir, "test.txt"),
ReqId = 0,
- {Cm, Channel} = ?config(sftp, Config),
+ {Cm, Channel} = proplists:get_value(sftp, Config),
{ok, <<?SSH_FXP_HANDLE, ?UINT32(ReqId), Handle/binary>>, _} =
open_file(FileName, Cm, Channel, ReqId,
@@ -279,8 +284,8 @@ read_file(Config) when is_list(Config) ->
read_dir() ->
[{doc,"Test SSH_FXP_READDIR command"}].
read_dir(Config) when is_list(Config) ->
- PrivDir = ?config(priv_dir, Config),
- {Cm, Channel} = ?config(sftp, Config),
+ PrivDir = proplists:get_value(priv_dir, Config),
+ {Cm, Channel} = proplists:get_value(sftp, Config),
ReqId = 0,
{ok, <<?SSH_FXP_HANDLE, ?UINT32(ReqId), Handle/binary>>, _} =
open_dir(PrivDir, Cm, Channel, ReqId),
@@ -290,11 +295,11 @@ read_dir(Config) when is_list(Config) ->
write_file() ->
[{doc, "Test SSH_FXP_WRITE command"}].
write_file(Config) when is_list(Config) ->
- PrivDir = ?config(priv_dir, Config),
+ PrivDir = proplists:get_value(priv_dir, Config),
FileName = filename:join(PrivDir, "test.txt"),
ReqId = 0,
- {Cm, Channel} = ?config(sftp, Config),
+ {Cm, Channel} = proplists:get_value(sftp, Config),
{ok, <<?SSH_FXP_HANDLE, ?UINT32(ReqId), Handle/binary>>, _} =
open_file(FileName, Cm, Channel, ReqId,
@@ -314,10 +319,10 @@ write_file(Config) when is_list(Config) ->
remove_file() ->
[{doc, "Test SSH_FXP_REMOVE command"}].
remove_file(Config) when is_list(Config) ->
- PrivDir = ?config(priv_dir, Config),
+ PrivDir = proplists:get_value(priv_dir, Config),
FileName = filename:join(PrivDir, "test.txt"),
ReqId = 0,
- {Cm, Channel} = ?config(sftp, Config),
+ {Cm, Channel} = proplists:get_value(sftp, Config),
{ok, <<?SSH_FXP_STATUS, ?UINT32(ReqId),
?UINT32(?SSH_FX_OK), _/binary>>, _} =
@@ -335,11 +340,11 @@ remove_file(Config) when is_list(Config) ->
rename_file() ->
[{doc, "Test SSH_FXP_RENAME command"}].
rename_file(Config) when is_list(Config) ->
- PrivDir = ?config(priv_dir, Config),
+ PrivDir = proplists:get_value(priv_dir, Config),
FileName = filename:join(PrivDir, "test.txt"),
NewFileName = filename:join(PrivDir, "test1.txt"),
ReqId = 0,
- {Cm, Channel} = ?config(sftp, Config),
+ {Cm, Channel} = proplists:get_value(sftp, Config),
{ok, <<?SSH_FXP_STATUS, ?UINT32(ReqId),
?UINT32(?SSH_FX_OK), _/binary>>, _} =
@@ -372,8 +377,8 @@ rename_file(Config) when is_list(Config) ->
mk_rm_dir() ->
[{doc, "Test SSH_FXP_MKDIR and SSH_FXP_RMDIR command"}].
mk_rm_dir(Config) when is_list(Config) ->
- PrivDir = ?config(priv_dir, Config),
- {Cm, Channel} = ?config(sftp, Config),
+ PrivDir = proplists:get_value(priv_dir, Config),
+ {Cm, Channel} = proplists:get_value(sftp, Config),
DirName = filename:join(PrivDir, "test"),
ReqId = 0,
{ok, <<?SSH_FXP_STATUS, ?UINT32(ReqId), ?UINT32(?SSH_FX_OK),
@@ -400,8 +405,8 @@ real_path(Config) when is_list(Config) ->
{skip, "Not a relevant test on windows"};
_ ->
ReqId = 0,
- {Cm, Channel} = ?config(sftp, Config),
- PrivDir = ?config(priv_dir, Config),
+ {Cm, Channel} = proplists:get_value(sftp, Config),
+ PrivDir = proplists:get_value(priv_dir, Config),
TestDir = filename:join(PrivDir, "ssh_test"),
ok = file:make_dir(TestDir),
@@ -426,8 +431,8 @@ links(Config) when is_list(Config) ->
{skip, "Links are not fully supported by windows"};
_ ->
ReqId = 0,
- {Cm, Channel} = ?config(sftp, Config),
- PrivDir = ?config(priv_dir, Config),
+ {Cm, Channel} = proplists:get_value(sftp, Config),
+ PrivDir = proplists:get_value(priv_dir, Config),
FileName = filename:join(PrivDir, "test.txt"),
LinkFileName = filename:join(PrivDir, "link_test.txt"),
@@ -450,10 +455,10 @@ links(Config) when is_list(Config) ->
retrieve_attributes() ->
[{"Test SSH_FXP_STAT, SSH_FXP_LSTAT AND SSH_FXP_FSTAT commands"}].
retrieve_attributes(Config) when is_list(Config) ->
- PrivDir = ?config(priv_dir, Config),
+ PrivDir = proplists:get_value(priv_dir, Config),
FileName = filename:join(PrivDir, "test.txt"),
ReqId = 0,
- {Cm, Channel} = ?config(sftp, Config),
+ {Cm, Channel} = proplists:get_value(sftp, Config),
{ok, FileInfo} = file:read_file_info(FileName),
@@ -519,10 +524,10 @@ set_attributes(Config) when is_list(Config) ->
{win32, _} ->
{skip, "Known error bug in erts file:read_file_info"};
_ ->
- PrivDir = ?config(priv_dir, Config),
+ PrivDir = proplists:get_value(priv_dir, Config),
FileName = filename:join(PrivDir, "test.txt"),
ReqId = 0,
- {Cm, Channel} = ?config(sftp, Config),
+ {Cm, Channel} = proplists:get_value(sftp, Config),
{ok, FileInfo} = file:read_file_info(FileName),
@@ -573,11 +578,11 @@ set_attributes(Config) when is_list(Config) ->
ver3_rename() ->
[{doc, "Test that ver3 rename message is handled OTP 6352"}].
ver3_rename(Config) when is_list(Config) ->
- PrivDir = ?config(priv_dir, Config),
+ PrivDir = proplists:get_value(priv_dir, Config),
FileName = filename:join(PrivDir, "test.txt"),
NewFileName = filename:join(PrivDir, "test1.txt"),
ReqId = 0,
- {Cm, Channel} = ?config(sftp, Config),
+ {Cm, Channel} = proplists:get_value(sftp, Config),
{ok, <<?SSH_FXP_STATUS, ?UINT32(ReqId),
?UINT32(?SSH_FX_OK), _/binary>>, _} =
@@ -588,7 +593,7 @@ relpath() ->
[{doc, "Check that realpath works ok seq10670"}].
relpath(Config) when is_list(Config) ->
ReqId = 0,
- {Cm, Channel} = ?config(sftp, Config),
+ {Cm, Channel} = proplists:get_value(sftp, Config),
case os:type() of
{win32, _} ->
@@ -610,11 +615,11 @@ relpath(Config) when is_list(Config) ->
sshd_read_file() ->
[{doc,"Test SSH_FXP_READ command, using sshd-server"}].
sshd_read_file(Config) when is_list(Config) ->
- PrivDir = ?config(priv_dir, Config),
+ PrivDir = proplists:get_value(priv_dir, Config),
FileName = filename:join(PrivDir, "test.txt"),
ReqId = 0,
- {Cm, Channel} = ?config(sftp, Config),
+ {Cm, Channel} = proplists:get_value(sftp, Config),
{ok, <<?SSH_FXP_HANDLE, ?UINT32(ReqId), Handle/binary>>, _} =
open_file(FileName, Cm, Channel, ReqId,
@@ -632,9 +637,9 @@ sshd_read_file(Config) when is_list(Config) ->
ver6_basic() ->
[{doc, "Test SFTP Version 6"}].
ver6_basic(Config) when is_list(Config) ->
- PrivDir = ?config(priv_dir, Config),
+ PrivDir = proplists:get_value(priv_dir, Config),
%FileName = filename:join(PrivDir, "test.txt"),
- {Cm, Channel} = ?config(sftp, Config),
+ {Cm, Channel} = proplists:get_value(sftp, Config),
ReqId = 0,
{ok, <<?SSH_FXP_STATUS, ?UINT32(ReqId), % Ver 6 we have 5
?UINT32(?SSH_FX_FILE_IS_A_DIRECTORY), _/binary>>, _} =
@@ -645,7 +650,7 @@ ver6_basic(Config) when is_list(Config) ->
%% Internal functions ------------------------------------------------
%%--------------------------------------------------------------------
prep(Config) ->
- PrivDir = ?config(priv_dir, Config),
+ PrivDir = proplists:get_value(priv_dir, Config),
TestFile = filename:join(PrivDir, "test.txt"),
TestFile1 = filename:join(PrivDir, "test1.txt"),
@@ -653,7 +658,7 @@ prep(Config) ->
file:delete(TestFile1),
%% Initial config
- DataDir = ?config(data_dir, Config),
+ DataDir = proplists:get_value(data_dir, Config),
FileName = filename:join(DataDir, "test.txt"),
file:copy(FileName, TestFile),
Mode = 8#00400 bor 8#00200 bor 8#00040, % read & write owner, read group
generated by cgit v1.2.3 (git 2.25.1) at 2024-08-13 18:55:59 +0000