diff options
Diffstat (limited to 'lib/ssh/test/ssh_test_lib.erl')
-rw-r--r-- | lib/ssh/test/ssh_test_lib.erl | 237 |
1 files changed, 216 insertions, 21 deletions
diff --git a/lib/ssh/test/ssh_test_lib.erl b/lib/ssh/test/ssh_test_lib.erl index b8abf5e80e..6d568125bb 100644 --- a/lib/ssh/test/ssh_test_lib.erl +++ b/lib/ssh/test/ssh_test_lib.erl @@ -1,18 +1,19 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2004-2012. All Rights Reserved. +%% Copyright Ericsson AB 2004-2015. All Rights Reserved. %% -%% The contents of this file are subject to the Erlang Public License, -%% Version 1.1, (the "License"); you may not use this file except in -%% compliance with the License. You should have received a copy of the -%% Erlang Public License along with this software. If not, it can be -%% retrieved online at http://www.erlang.org/. +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at %% -%% Software distributed under the License is distributed on an "AS IS" -%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See -%% the License for the specific language governing rights and limitations -%% under the License. +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. %% %% %CopyrightEnd% %% @@ -26,6 +27,8 @@ -include_lib("public_key/include/public_key.hrl"). -include_lib("common_test/include/ct.hrl"). +-include_lib("ssh/src/ssh_transport.hrl"). + -define(TIMEOUT, 50000). @@ -64,6 +67,55 @@ daemon(Host, Port, Options) -> end. +std_daemon(Config, ExtraOpts) -> + PrivDir = ?config(priv_dir, Config), + UserDir = filename:join(PrivDir, nopubkey), % to make sure we don't use public-key-auth + file:make_dir(UserDir), + std_daemon1(Config, + ExtraOpts ++ + [{user_dir, UserDir}, + {user_passwords, [{"usr1","pwd1"}]}]). + +std_daemon1(Config, ExtraOpts) -> + SystemDir = ?config(data_dir, Config), + {_Server, _Host, _Port} = ssh_test_lib:daemon([{system_dir, SystemDir}, + {failfun, fun ssh_test_lib:failfun/2} + | ExtraOpts]). + +std_connect(Config, Host, Port, ExtraOpts) -> + UserDir = ?config(priv_dir, Config), + _ConnectionRef = + ssh_test_lib:connect(Host, Port, [{silently_accept_hosts, true}, + {user_dir, UserDir}, + {user, "usr1"}, + {password, "pwd1"}, + {user_interaction, false} + | ExtraOpts]). + +std_simple_sftp(Host, Port, Config) -> + UserDir = ?config(priv_dir, Config), + DataFile = filename:join(UserDir, "test.data"), + ConnectionRef = ssh_test_lib:std_connect(Config, Host, Port, []), + {ok, ChannelRef} = ssh_sftp:start_channel(ConnectionRef), + Data = crypto:rand_bytes(proplists:get_value(std_simple_sftp_size,Config,10)), + ok = ssh_sftp:write_file(ChannelRef, DataFile, Data), + {ok,ReadData} = file:read_file(DataFile), + ok = ssh:close(ConnectionRef), + Data == ReadData. + +std_simple_exec(Host, Port, Config) -> + ConnectionRef = ssh_test_lib:std_connect(Config, Host, Port, []), + {ok, ChannelId} = ssh_connection:session_channel(ConnectionRef, infinity), + success = ssh_connection:exec(ConnectionRef, ChannelId, "23+21-2.", infinity), + Data = {ssh_cm, ConnectionRef, {data, ChannelId, 0, <<"42\n">>}}, + case ssh_test_lib:receive_exec_result(Data) of + expected -> + ok; + Other -> + ct:fail(Other) + end, + ssh_test_lib:receive_exec_end(ConnectionRef, ChannelId). + start_shell(Port, IOServer, UserDir) -> start_shell(Port, IOServer, UserDir, []). @@ -96,10 +148,10 @@ loop_io_server(TestCase, Buff0) -> {input, TestCase, Line} -> loop_io_server(TestCase, Buff0 ++ [Line]); {io_request, From, ReplyAs, Request} -> -%%ct:pal("~p",[{io_request, From, ReplyAs, Request}]), +%%ct:log("~p",[{io_request, From, ReplyAs, Request}]), {ok, Reply, Buff} = io_request(Request, TestCase, From, ReplyAs, Buff0), -%%ct:pal("io_request(~p)-->~p",[Request,{ok, Reply, Buff}]), +%%ct:log("io_request(~p)-->~p",[Request,{ok, Reply, Buff}]), io_reply(From, ReplyAs, Reply), loop_io_server(TestCase, Buff); {'EXIT',_, _} -> @@ -133,26 +185,26 @@ io_request({get_line, _Enc,_}, _, _, _, [Line | Buff]) -> io_reply(_, _, []) -> ok; io_reply(From, ReplyAs, Reply) -> -%%ct:pal("io_reply ~p sending ~p ! ~p",[self(),From, {io_reply, ReplyAs, Reply}]), +%%ct:log("io_reply ~p sending ~p ! ~p",[self(),From, {io_reply, ReplyAs, Reply}]), From ! {io_reply, ReplyAs, Reply}. reply(_, []) -> ok; reply(TestCase, Result) -> -%%ct:pal("reply ~p sending ~p ! ~p",[self(), TestCase, Result]), +%%ct:log("reply ~p sending ~p ! ~p",[self(), TestCase, Result]), TestCase ! Result. receive_exec_result(Msg) -> - ct:pal("Expect data! ~p", [Msg]), + ct:log("Expect data! ~p", [Msg]), receive {ssh_cm,_,{data,_,1, Data}} -> - ct:pal("StdErr: ~p~n", [Data]), + ct:log("StdErr: ~p~n", [Data]), receive_exec_result(Msg); Msg -> - ct:pal("1: Collected data ~p", [Msg]), + ct:log("1: Collected data ~p", [Msg]), expected; Other -> - ct:pal("Other ~p", [Other]), + ct:log("Other ~p", [Other]), {unexpected_msg, Other} end. @@ -164,15 +216,15 @@ receive_exec_end(ConnectionRef, ChannelId) -> case receive_exec_result(ExitStatus) of {unexpected_msg, Eof} -> %% Open ssh seems to not allways send these messages %% in the same order! - ct:pal("2: Collected data ~p", [Eof]), + ct:log("2: Collected data ~p", [Eof]), case receive_exec_result(ExitStatus) of expected -> expected = receive_exec_result(Closed); {unexpected_msg, Closed} -> - ct:pal("3: Collected data ~p", [Closed]) + ct:log("3: Collected data ~p", [Closed]) end; expected -> - ct:pal("4: Collected data ~p", [ExitStatus]), + ct:log("4: Collected data ~p", [ExitStatus]), expected = receive_exec_result(Eof), expected = receive_exec_result(Closed); Other -> @@ -358,3 +410,146 @@ do_inet_port(Node) -> {ok, Socket} = rpc:call(Node, gen_tcp, listen, [0, [{reuseaddr, true}]]), {ok, Port} = rpc:call(Node, inet, port, [Socket]), {Port, Socket}. + +openssh_sanity_check(Config) -> + ssh:start(), + case ssh:connect("localhost", 22, [{password,""}]) of + {ok, Pid} -> + ssh:close(Pid), + ssh:stop(), + Config; + Err -> + Str = lists:append(io_lib:format("~p", [Err])), + ssh:stop(), + {skip, Str} + end. + +%%-------------------------------------------------------------------- +%% Check if we have a "newer" ssh client that supports these test cases + +ssh_client_supports_Q() -> + ErlPort = open_port({spawn, "ssh -Q cipher"}, [exit_status, stderr_to_stdout]), + 0 == check_ssh_client_support2(ErlPort). + +check_ssh_client_support2(P) -> + receive + {P, {data, _A}} -> + check_ssh_client_support2(P); + {P, {exit_status, E}} -> + E + after 5000 -> + + ct:log("Openssh command timed out ~n"), + -1 + end. + +default_algorithms(Host, Port) -> + KexInitPattern = + #ssh_msg_kexinit{ + kex_algorithms = '$kex_algorithms', + server_host_key_algorithms = '$server_host_key_algorithms', + encryption_algorithms_client_to_server = '$encryption_algorithms_client_to_server', + encryption_algorithms_server_to_client = '$encryption_algorithms_server_to_client', + mac_algorithms_client_to_server = '$mac_algorithms_client_to_server', + mac_algorithms_server_to_client = '$mac_algorithms_server_to_client', + compression_algorithms_client_to_server = '$compression_algorithms_client_to_server', + compression_algorithms_server_to_client = '$compression_algorithms_server_to_client', + _ = '_' + }, + + try ssh_trpt_test_lib:exec( + [{connect,Host,Port, [{silently_accept_hosts, true}, + {user_interaction, false}]}, + {send,hello}, + receive_hello, + {send, ssh_msg_kexinit}, + {match, KexInitPattern, receive_msg}, + close_socket]) + of + {ok,E} -> + [Kex, PubKey, EncC2S, EncS2C, MacC2S, MacS2C, CompC2S, CompS2C] = + ssh_trpt_test_lib:instantiate(['$kex_algorithms', + '$server_host_key_algorithms', + '$encryption_algorithms_client_to_server', + '$encryption_algorithms_server_to_client', + '$mac_algorithms_client_to_server', + '$mac_algorithms_server_to_client', + '$compression_algorithms_client_to_server', + '$compression_algorithms_server_to_client' + ], E), + [{kex, to_atoms(Kex)}, + {public_key, to_atoms(PubKey)}, + {cipher, [{client2server, to_atoms(EncC2S)}, + {server2client, to_atoms(EncS2C)}]}, + {mac, [{client2server, to_atoms(MacC2S)}, + {server2client, to_atoms(MacS2C)}]}, + {compression, [{client2server, to_atoms(CompC2S)}, + {server2client, to_atoms(CompS2C)}]}]; + _ -> + [] + catch + _:_ -> + [] + end. + + +default_algorithms(sshd) -> + default_algorithms("localhost", 22); +default_algorithms(sshc) -> + case os:find_executable("ssh") of + false -> + []; + _ -> + Cipher = sshc(cipher), + Mac = sshc(mac), + [{kex, sshc(kex)}, + {public_key, sshc(key)}, + {cipher, [{client2server, Cipher}, + {server2client, Cipher}]}, + {mac, [{client2server, Mac}, + {server2client, Mac}]} + ] + end. + +sshc(Tag) -> + to_atoms( + string:tokens(os:cmd(lists:concat(["ssh -Q ",Tag])), "\n") + ). + +ssh_type() -> + case os:find_executable("ssh") of + false -> not_found; + _ -> + case os:cmd("ssh -V") of + "OpenSSH" ++ _ -> + openSSH; + Str -> + ct:log("ssh client ~p is unknown",[Str]), + unknown + end + end. + +algo_intersection([], _) -> []; +algo_intersection(_, []) -> []; +algo_intersection(L1=[A1|_], L2=[A2|_]) when is_atom(A1), is_atom(A2) -> + true = lists:all(fun erlang:is_atom/1, L1++L2), + lists:foldr(fun(A,Acc) -> + case lists:member(A,L2) of + true -> [A|Acc]; + false -> Acc + end + end, [], L1); +algo_intersection([{K,V1}|T1], L2) -> + case lists:keysearch(K,1,L2) of + {value, {K,V2}} -> + [{K,algo_intersection(V1,V2)} | algo_intersection(T1,L2)]; + false -> + algo_intersection(T1,L2) + end; +algo_intersection(_, _) -> + []. + + +to_atoms(L) -> lists:map(fun erlang:list_to_atom/1, L). + + |