diff options
Diffstat (limited to 'lib/ssl/test/ssl_api_SUITE.erl')
| -rw-r--r-- | lib/ssl/test/ssl_api_SUITE.erl | 1976 |
1 files changed, 1976 insertions, 0 deletions
diff --git a/lib/ssl/test/ssl_api_SUITE.erl b/lib/ssl/test/ssl_api_SUITE.erl new file mode 100644 index 0000000000..fefecc0b65 --- /dev/null +++ b/lib/ssl/test/ssl_api_SUITE.erl @@ -0,0 +1,1976 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2019-2019. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +%% + +%% +-module(ssl_api_SUITE). + +%% Note: This directive should only be used in test suites. +-compile(export_all). +-include_lib("common_test/include/ct.hrl"). +-include_lib("ssl/src/ssl_api.hrl"). + +-define(SLEEP, 500). +%%-------------------------------------------------------------------- +%% Common Test interface functions ----------------------------------- +%%-------------------------------------------------------------------- + +all() -> + [ + {group, 'tlsv1.3'}, + {group, 'tlsv1.2'}, + {group, 'tlsv1.1'}, + {group, 'tlsv1'}, + {group, 'sslv3'}, + {group, 'dtlsv1.2'}, + {group, 'dtlsv1'} + ]. + +groups() -> + [ + {'tlsv1.3', [], ((gen_api_tests() ++ tls13_group() ++ handshake_paus_tests()) -- [dh_params, honor_server_cipher_order, honor_client_cipher_order, + new_options_in_handshake]) + ++ (since_1_2() -- [conf_signature_algs])}, + {'tlsv1.2', [], gen_api_tests() ++ since_1_2() ++ handshake_paus_tests() ++ pre_1_3()}, + {'tlsv1.1', [], gen_api_tests() ++ handshake_paus_tests() ++ pre_1_3()}, + {'tlsv1', [], gen_api_tests() ++ handshake_paus_tests() ++ pre_1_3() ++ beast_mitigation_test()}, + {'sslv3', [], (gen_api_tests() -- [new_options_in_handshake]) ++ beast_mitigation_test() ++ pre_1_3()}, + {'dtlsv1.2', [], (gen_api_tests() -- [invalid_keyfile, invalid_certfile, invalid_cacertfile, + invalid_options, new_options_in_handshake]) ++ handshake_paus_tests() ++ pre_1_3()}, + {'dtlsv1', [], (gen_api_tests() -- [invalid_keyfile, invalid_certfile, invalid_cacertfile, + invalid_options, new_options_in_handshake]) ++ handshake_paus_tests() ++ pre_1_3()} + ]. + +since_1_2() -> + [ + conf_signature_algs, + no_common_signature_algs + ]. + +pre_1_3() -> + [ + default_reject_anonymous + ]. +gen_api_tests() -> + [ + peercert, + peercert_with_client_cert, + connection_information, + secret_connection_info, + versions, + active_n, + dh_params, + hibernate, + hibernate_right_away, + listen_socket, + recv_active, + recv_active_once, + recv_active_n, + recv_timeout, + recv_close, + controlling_process, + controller_dies, + controlling_process_transport_accept_socket, + close_with_timeout, + close_in_error_state, + call_in_error_state, + close_transport_accept, + abuse_transport_accept_socket, + honor_server_cipher_order, + honor_client_cipher_order, + ipv6, + der_input, + new_options_in_handshake, + max_handshake_size, + invalid_certfile, + invalid_cacertfile, + invalid_keyfile, + options_not_proplist, + invalid_options + ]. + +handshake_paus_tests() -> + [ + handshake_continue, + handshake_continue_timeout, + hello_client_cancel, + hello_server_cancel + ]. + +%% Only relevant for SSL 3.0 and TLS 1.1 +beast_mitigation_test() -> + [%% Original option + rizzo_disabled, + %% Same effect as disable + rizzo_zero_n, + %% Same as default + rizzo_one_n_minus_one + ]. + +tls13_group() -> + [ + supported_groups, + honor_server_cipher_order_tls13, + honor_client_cipher_order_tls13 + ]. + + +init_per_suite(Config0) -> + catch crypto:stop(), + try crypto:start() of + ok -> + ssl_test_lib:clean_start(), + ssl_test_lib:make_rsa_cert(Config0) + catch _:_ -> + {skip, "Crypto did not start"} + end. + +end_per_suite(_Config) -> + ssl:stop(), + application:unload(ssl), + application:stop(crypto). + + +init_per_group(GroupName, Config) -> + case ssl_test_lib:is_tls_version(GroupName) of + true -> + case ssl_test_lib:sufficient_crypto_support(GroupName) of + true -> + [{client_type, erlang}, + {server_type, erlang} | ssl_test_lib:init_tls_version(GroupName, Config)]; + false -> + {skip, "Missing crypto support"} + end; + _ -> + ssl:start(), + Config + end. + +end_per_group(GroupName, Config) -> + case ssl_test_lib:is_tls_version(GroupName) of + true -> + ssl_test_lib:clean_tls_version(Config); + false -> + Config + end. + +init_per_testcase(prf, Config) -> + ssl_test_lib:ct_log_supported_protocol_versions(Config), + ct:timetrap({seconds, 10}), + Version = ssl_test_lib:protocol_version(Config), + PRFS = [md5, sha, sha256, sha384, sha512], + %% All are the result of running tls_v1:prf(PrfAlgo, <<>>, <<>>, <<>>, 16) + %% with the specified PRF algorithm + ExpectedPrfResults = + [{md5, <<96,139,180,171,236,210,13,10,28,32,2,23,88,224,235,199>>}, + {sha, <<95,3,183,114,33,169,197,187,231,243,19,242,220,228,70,151>>}, + {sha256, <<166,249,145,171,43,95,158,232,6,60,17,90,183,180,0,155>>}, + {sha384, <<153,182,217,96,186,130,105,85,65,103,123,247,146,91,47,106>>}, + {sha512, <<145,8,98,38,243,96,42,94,163,33,53,49,241,4,127,28>>}, + %% TLS 1.0 and 1.1 PRF: + {md5sha, <<63,136,3,217,205,123,200,177,251,211,17,229,132,4,173,80>>}], + TestPlan = prf_create_plan([Version], PRFS, ExpectedPrfResults), + [{prf_test_plan, TestPlan} | Config]; +init_per_testcase(_TestCase, Config) -> + ssl_test_lib:ct_log_supported_protocol_versions(Config), + ct:timetrap({seconds, 10}), + Config. + +end_per_testcase(internal_active_n, _Config) -> + application:unset_env(ssl, internal_active_n); +end_per_testcase(_TestCase, Config) -> + Config. + +%%-------------------------------------------------------------------- +%% Test Cases -------------------------------------------------------- +%%-------------------------------------------------------------------- +peercert() -> + [{doc,"Test API function peercert/1"}]. +peercert(Config) when is_list(Config) -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + + Server = ssl_test_lib:start_server([{node, ClientNode}, {port, 0}, + {from, self()}, + {mfa, {?MODULE, peercert_result, []}}, + {options, ServerOpts}]), + Port = ssl_test_lib:inet_port(Server), + Client = ssl_test_lib:start_client([{node, ServerNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {mfa, {?MODULE, peercert_result, []}}, + {options, ClientOpts}]), + + CertFile = proplists:get_value(certfile, ServerOpts), + [{'Certificate', BinCert, _}]= ssl_test_lib:pem_to_der(CertFile), + + ServerMsg = {error, no_peercert}, + ClientMsg = {ok, BinCert}, + + ct:log("Testcase ~p, Client ~p Server ~p ~n", + [self(), Client, Server]), + + ssl_test_lib:check_result(Server, ServerMsg, Client, ClientMsg), + + ssl_test_lib:close(Server), + ssl_test_lib:close(Client). + +%%-------------------------------------------------------------------- + +peercert_with_client_cert() -> + [{doc,"Test API function peercert/1"}]. +peercert_with_client_cert(Config) when is_list(Config) -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + + Server = ssl_test_lib:start_server([{node, ClientNode}, {port, 0}, + {from, self()}, + {mfa, {?MODULE, peercert_result, []}}, + {options, [{verify, verify_peer} | ServerOpts]}]), + Port = ssl_test_lib:inet_port(Server), + Client = ssl_test_lib:start_client([{node, ServerNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {mfa, {?MODULE, peercert_result, []}}, + {options, ClientOpts}]), + + ServerCertFile = proplists:get_value(certfile, ServerOpts), + [{'Certificate', ServerBinCert, _}]= ssl_test_lib:pem_to_der(ServerCertFile), + ClientCertFile = proplists:get_value(certfile, ClientOpts), + [{'Certificate', ClientBinCert, _}]= ssl_test_lib:pem_to_der(ClientCertFile), + + ServerMsg = {ok, ClientBinCert}, + ClientMsg = {ok, ServerBinCert}, + + ct:log("Testcase ~p, Client ~p Server ~p ~n", + [self(), Client, Server]), + + ssl_test_lib:check_result(Server, ServerMsg, Client, ClientMsg), + + ssl_test_lib:close(Server), + ssl_test_lib:close(Client). + +%%-------------------------------------------------------------------- +connection_information() -> + [{doc,"Test the API function ssl:connection_information/1"}]. +connection_information(Config) when is_list(Config) -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0}, + {from, self()}, + {mfa, {?MODULE, connection_information_result, []}}, + {options, ServerOpts}]), + + Port = ssl_test_lib:inet_port(Server), + Client = ssl_test_lib:start_client([{node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {mfa, {?MODULE, connection_information_result, []}}, + {options, ClientOpts}]), + + ct:log("Testcase ~p, Client ~p Server ~p ~n", + [self(), Client, Server]), + + ssl_test_lib:check_result(Server, ok, Client, ok), + + ssl_test_lib:close(Server), + ssl_test_lib:close(Client). +%%-------------------------------------------------------------------- + +secret_connection_info() -> + [{doc,"Test the API function ssl:connection_information/2"}]. +secret_connection_info(Config) when is_list(Config) -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + + Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0}, + {from, self()}, + {mfa, {?MODULE, secret_connection_info_result, []}}, + {options, [{verify, verify_peer} | ServerOpts]}]), + + Port = ssl_test_lib:inet_port(Server), + Client = ssl_test_lib:start_client([{node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {mfa, {?MODULE, secret_connection_info_result, []}}, + {options, [{verify, verify_peer} |ClientOpts]}]), + + ct:log("Testcase ~p, Client ~p Server ~p ~n", + [self(), Client, Server]), + + ssl_test_lib:check_result(Server, true, Client, true), + + ssl_test_lib:close(Server), + ssl_test_lib:close(Client). +%%-------------------------------------------------------------------- +prf() -> + [{doc,"Test that ssl:prf/5 uses the negotiated PRF."}]. +prf(Config) when is_list(Config) -> + TestPlan = proplists:get_value(prf_test_plan, Config), + case TestPlan of + [] -> ct:fail({error, empty_prf_test_plan}); + _ -> lists:foreach(fun(Suite) -> + lists:foreach( + fun(Test) -> + V = proplists:get_value(tls_ver, Test), + C = proplists:get_value(ciphers, Test), + E = proplists:get_value(expected, Test), + P = proplists:get_value(prf, Test), + prf_run_test(Config, V, C, E, P) + end, Suite) + end, TestPlan) + end. + +%%-------------------------------------------------------------------- +dh_params() -> + [{doc,"Test to specify DH-params file in server."}]. + +dh_params(Config) when is_list(Config) -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + DataDir = proplists:get_value(data_dir, Config), + DHParamFile = filename:join(DataDir, "dHParam.pem"), + + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + + Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0}, + {from, self()}, + {mfa, {ssl_test_lib, send_recv_result_active, []}}, + {options, [{dhfile, DHParamFile} | ServerOpts]}]), + Port = ssl_test_lib:inet_port(Server), + Client = ssl_test_lib:start_client([{node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {mfa, {ssl_test_lib, send_recv_result_active, []}}, + {options, + [{ciphers,[{dhe_rsa,aes_256_cbc,sha}]} | + ClientOpts]}]), + + ssl_test_lib:check_result(Server, ok, Client, ok), + + ssl_test_lib:close(Server), + ssl_test_lib:close(Client). + +%%-------------------------------------------------------------------- +conf_signature_algs() -> + [{doc,"Test to set the signature_algs option on both client and server"}]. +conf_signature_algs(Config) when is_list(Config) -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + Server = + ssl_test_lib:start_server([{node, ServerNode}, {port, 0}, + {from, self()}, + {mfa, {ssl_test_lib, send_recv_result, []}}, + {options, [{active, false}, {signature_algs, [{sha256, rsa}]} | ServerOpts]}]), + Port = ssl_test_lib:inet_port(Server), + Client = + ssl_test_lib:start_client([{node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {mfa, {ssl_test_lib, send_recv_result, []}}, + {options, [{active, false}, {signature_algs, [{sha256, rsa}]} | ClientOpts]}]), + + ct:log("Testcase ~p, Client ~p Server ~p ~n", + [self(), Client, Server]), + + ssl_test_lib:check_result(Server, ok, Client, ok), + + ssl_test_lib:close(Server), + ssl_test_lib:close(Client). + + +%%-------------------------------------------------------------------- +no_common_signature_algs() -> + [{doc,"Set the signature_algs option so that there client and server does not share any hash sign algorithms"}]. +no_common_signature_algs(Config) when is_list(Config) -> + + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + + + Server = ssl_test_lib:start_server_error([{node, ServerNode}, {port, 0}, + {from, self()}, + {options, [{signature_algs, [{sha256, rsa}]} + | ServerOpts]}]), + Port = ssl_test_lib:inet_port(Server), + Client = ssl_test_lib:start_client_error([{node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {options, [{signature_algs, [{sha384, rsa}]} + | ClientOpts]}]), + + ssl_test_lib:check_server_alert(Server, Client, insufficient_security). + +%%-------------------------------------------------------------------- +handshake_continue() -> + [{doc, "Test API function ssl:handshake_continue/3"}]. +handshake_continue(Config) when is_list(Config) -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + + Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0}, + {from, self()}, + {mfa, {ssl_test_lib, send_recv_result_active, []}}, + {options, ssl_test_lib:ssl_options([{reuseaddr, true}, + {verify, verify_peer}, + {handshake, hello} | ServerOpts + ], + Config)}, + {continue_options, proplists:delete(reuseaddr, ServerOpts)} + ]), + + Port = ssl_test_lib:inet_port(Server), + + Client = ssl_test_lib:start_client([{node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {mfa, {ssl_test_lib, send_recv_result_active, []}}, + {options, ssl_test_lib:ssl_options([{handshake, hello}, + {verify, verify_peer} | ClientOpts + ], + Config)}, + {continue_options, proplists:delete(reuseaddr, ClientOpts)}]), + + ssl_test_lib:check_result(Server, ok, Client, ok), + + ssl_test_lib:close(Server), + ssl_test_lib:close(Client). + + +%%------------------------------------------------------------------ +handshake_continue_timeout() -> + [{doc, "Test API function ssl:handshake_continue/3 with short timeout"}]. +handshake_continue_timeout(Config) when is_list(Config) -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + + Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0}, + {from, self()}, + {timeout, 1}, + {options, ssl_test_lib:ssl_options([{reuseaddr, true}, {handshake, hello}, + {verify, verify_peer} | ServerOpts], + Config)}, + {continue_options, proplists:delete(reuseaddr, ServerOpts)} + ]), + + Port = ssl_test_lib:inet_port(Server), + + + ssl_test_lib:start_client_error([{node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {options, [{verify, verify_peer} | ClientOpts]}]), + + ssl_test_lib:check_result(Server, {error,timeout}), + ssl_test_lib:close(Server). + + +%%-------------------------------------------------------------------- +hello_client_cancel() -> + [{doc, "Test API function ssl:handshake_cancel/1 on the client side"}]. +hello_client_cancel(Config) when is_list(Config) -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + + Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0}, + {from, self()}, + {options, ssl_test_lib:ssl_options([{handshake, hello}, + {verify, verify_peer} | ServerOpts], Config)}, + {continue_options, proplists:delete(reuseaddr, ServerOpts)}]), + + Port = ssl_test_lib:inet_port(Server), + + %% That is ssl:handshake_cancel returns ok + {connect_failed, ok} = ssl_test_lib:start_client([{node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {options, ssl_test_lib:ssl_options([{handshake, hello}, + {verify, verify_peer} | ClientOpts], Config)}, + {continue_options, cancel}]), + ssl_test_lib:check_server_alert(Server, user_canceled). +%%-------------------------------------------------------------------- +hello_server_cancel() -> + [{doc, "Test API function ssl:handshake_cancel/1 on the server side"}]. +hello_server_cancel(Config) when is_list(Config) -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + + Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0}, + {from, self()}, + {options, ssl_test_lib:ssl_options([{handshake, hello}, + {verify, verify_peer} | ServerOpts + ], Config)}, + {continue_options, cancel}]), + + Port = ssl_test_lib:inet_port(Server), + + ssl_test_lib:start_client_error([{node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {options, ssl_test_lib:ssl_options([{handshake, hello}, + {verify, verify_peer} | ClientOpts + ], Config)}, + {continue_options, proplists:delete(reuseaddr, ClientOpts)}]), + + ssl_test_lib:check_result(Server, ok). + +%%-------------------------------------------------------------------- +versions() -> + [{doc,"Test API function versions/0"}]. + +versions(Config) when is_list(Config) -> + [_|_] = Versions = ssl:versions(), + ct:log("~p~n", [Versions]). + +%%-------------------------------------------------------------------- +%% Test case adapted from gen_tcp_misc_SUITE. +active_n() -> + [{doc,"Test {active,N} option"}]. + +active_n(Config) when is_list(Config) -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + Port = ssl_test_lib:inet_port(node()), + N = 3, + LS = ok(ssl:listen(Port, [{active,N}|ServerOpts])), + [{active,N}] = ok(ssl:getopts(LS, [active])), + active_n_common(LS, N), + Self = self(), + spawn_link(fun() -> + S0 = ok(ssl:transport_accept(LS)), + {ok, S} = ssl:handshake(S0), + ok = ssl:setopts(S, [{active,N}]), + [{active,N}] = ok(ssl:getopts(S, [active])), + ssl:controlling_process(S, Self), + Self ! {server, S} + end), + C = ok(ssl:connect("localhost", Port, [{active,N}|ClientOpts])), + [{active,N}] = ok(ssl:getopts(C, [active])), + S = receive + {server, S0} -> S0 + after + 1000 -> + exit({error, connect}) + end, + active_n_common(C, N), + active_n_common(S, N), + ok = ssl:setopts(C, [{active,N}]), + ok = ssl:setopts(S, [{active,N}]), + ReceiveMsg = fun(Socket, Msg) -> + receive + {ssl,Socket,Msg} -> + ok; + {ssl,Socket,Begin} -> + receive + {ssl,Socket,End} -> + Msg = Begin ++ End, + ok + after 1000 -> + exit(timeout) + end + after 1000 -> + exit(timeout) + end + end, + repeat(3, fun(I) -> + Msg = "message "++integer_to_list(I), + ok = ssl:send(C, Msg), + ReceiveMsg(S, Msg), + ok = ssl:send(S, Msg), + ReceiveMsg(C, Msg) + end), + receive + {ssl_passive,S} -> + [{active,false}] = ok(ssl:getopts(S, [active])) + after + 1000 -> + exit({error,ssl_passive}) + end, + receive + {ssl_passive,C} -> + [{active,false}] = ok(ssl:getopts(C, [active])) + after + 1000 -> + exit({error,ssl_passive}) + end, + LS2 = ok(ssl:listen(0, [{active,0}])), + receive + {ssl_passive,LS2} -> + [{active,false}] = ok(ssl:getopts(LS2, [active])) + after + 1000 -> + exit({error,ssl_passive}) + end, + ok = ssl:close(LS2), + ok = ssl:close(C), + ok = ssl:close(S), + ok = ssl:close(LS), + ok. + +hibernate() -> + [{doc,"Check that an SSL connection that is started with option " + "{hibernate_after, 1000} indeed hibernates after 1000ms of " + "inactivity"}]. + +hibernate(Config) -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + + Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0}, + {from, self()}, + {mfa, {ssl_test_lib, send_recv_result_active, []}}, + {options, ServerOpts}]), + Port = ssl_test_lib:inet_port(Server), + {Client, #sslsocket{pid=[Pid|_]}} = ssl_test_lib:start_client([return_socket, + {node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {mfa, {ssl_test_lib, send_recv_result_active, []}}, + {options, [{hibernate_after, 1000}|ClientOpts]}]), + {current_function, _} = + process_info(Pid, current_function), + + ssl_test_lib:check_result(Server, ok, Client, ok), + + ct:sleep(1500), + {current_function, {erlang, hibernate, 3}} = + process_info(Pid, current_function), + + ssl_test_lib:close(Server), + ssl_test_lib:close(Client). + +%%-------------------------------------------------------------------- + +hibernate_right_away() -> + [{doc,"Check that an SSL connection that is configured to hibernate " + "after 0 or 1 milliseconds hibernates as soon as possible and not " + "crashes"}]. + +hibernate_right_away(Config) -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + + StartServerOpts = [{node, ServerNode}, {port, 0}, + {from, self()}, + {mfa, {ssl_test_lib, send_recv_result_active, []}}, + {options, ServerOpts}], + StartClientOpts = [return_socket, + {node, ClientNode}, + {host, Hostname}, + {from, self()}, + {mfa, {ssl_test_lib, send_recv_result_active, []}}], + + Server1 = ssl_test_lib:start_server(StartServerOpts), + Port1 = ssl_test_lib:inet_port(Server1), + {Client1, #sslsocket{pid = [Pid1|_]}} = ssl_test_lib:start_client(StartClientOpts ++ + [{port, Port1}, {options, [{hibernate_after, 0}|ClientOpts]}]), + + ssl_test_lib:check_result(Server1, ok, Client1, ok), + + ct:sleep(1000), %% Schedule out + + {current_function, {erlang, hibernate, 3}} = + process_info(Pid1, current_function), + ssl_test_lib:close(Server1), + ssl_test_lib:close(Client1), + + Server2 = ssl_test_lib:start_server(StartServerOpts), + Port2 = ssl_test_lib:inet_port(Server2), + {Client2, #sslsocket{pid = [Pid2|_]}} = ssl_test_lib:start_client(StartClientOpts ++ + [{port, Port2}, {options, [{hibernate_after, 1}|ClientOpts]}]), + + ssl_test_lib:check_result(Server2, ok, Client2, ok), + + ct:sleep(1000), %% Schedule out + + {current_function, {erlang, hibernate, 3}} = + process_info(Pid2, current_function), + + ssl_test_lib:close(Server2), + ssl_test_lib:close(Client2). + +listen_socket() -> + [{doc,"Check error handling and inet compliance when calling API functions with listen sockets."}]. + +listen_socket(Config) -> + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + {ok, ListenSocket} = ssl:listen(0, ServerOpts), + + %% This can be a valid thing to do as + %% options are inherited by the accept socket + ok = ssl:controlling_process(ListenSocket, self()), + + {ok, _} = ssl:sockname(ListenSocket), + + {error, enotconn} = ssl:send(ListenSocket, <<"data">>), + {error, enotconn} = ssl:recv(ListenSocket, 0), + {error, enotconn} = ssl:connection_information(ListenSocket), + {error, enotconn} = ssl:peername(ListenSocket), + {error, enotconn} = ssl:peercert(ListenSocket), + {error, enotconn} = ssl:renegotiate(ListenSocket), + {error, enotconn} = ssl:prf(ListenSocket, 'master_secret', <<"Label">>, [client_random], 256), + {error, enotconn} = ssl:shutdown(ListenSocket, read_write), + + ok = ssl:close(ListenSocket). + +%%-------------------------------------------------------------------- +recv_active() -> + [{doc,"Test recv on active socket"}]. + +recv_active(Config) when is_list(Config) -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + Server = + ssl_test_lib:start_server([{node, ServerNode}, {port, 0}, + {from, self()}, + {mfa, {?MODULE, try_recv_active, []}}, + {options, [{active, true} | ServerOpts]}]), + Port = ssl_test_lib:inet_port(Server), + Client = + ssl_test_lib:start_client([{node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {mfa, {?MODULE, try_recv_active, []}}, + {options, [{active, true} | ClientOpts]}]), + + ssl_test_lib:check_result(Server, ok, Client, ok), + + ssl_test_lib:close(Server), + ssl_test_lib:close(Client). + +%%-------------------------------------------------------------------- +recv_active_once() -> + [{doc,"Test recv on active (once) socket"}]. + +recv_active_once(Config) when is_list(Config) -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + Server = + ssl_test_lib:start_server([{node, ServerNode}, {port, 0}, + {from, self()}, + {mfa, {?MODULE, try_recv_active_once, []}}, + {options, [{active, once} | ServerOpts]}]), + Port = ssl_test_lib:inet_port(Server), + Client = + ssl_test_lib:start_client([{node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {mfa, {?MODULE, try_recv_active_once, []}}, + {options, [{active, once} | ClientOpts]}]), + + ssl_test_lib:check_result(Server, ok, Client, ok), + + ssl_test_lib:close(Server), + ssl_test_lib:close(Client). + +%%-------------------------------------------------------------------- +recv_active_n() -> + [{doc,"Test recv on active (n) socket"}]. + +recv_active_n(Config) when is_list(Config) -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + Server = + ssl_test_lib:start_server([{node, ServerNode}, {port, 0}, + {from, self()}, + {mfa, {?MODULE, try_recv_active_once, []}}, + {options, [{active, 1} | ServerOpts]}]), + Port = ssl_test_lib:inet_port(Server), + Client = + ssl_test_lib:start_client([{node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {mfa, {?MODULE, try_recv_active_once, []}}, + {options, [{active, 1} | ClientOpts]}]), + + ssl_test_lib:check_result(Server, ok, Client, ok), + + ssl_test_lib:close(Server), + ssl_test_lib:close(Client). +%%-------------------------------------------------------------------- +recv_timeout() -> + [{doc,"Test ssl:ssl_accept timeout"}]. + +recv_timeout(Config) -> + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + + Server = + ssl_test_lib:start_server([{node, ServerNode}, {port, 0}, + {from, self()}, + {mfa, {?MODULE, send_recv_result_timeout_server, []}}, + {options, [{active, false} | ServerOpts]}]), + Port = ssl_test_lib:inet_port(Server), + + Client = ssl_test_lib:start_client([{node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {mfa, {?MODULE, + send_recv_result_timeout_client, []}}, + {options, [{active, false} | ClientOpts]}]), + + ssl_test_lib:check_result(Client, ok, Server, ok), + ssl_test_lib:close(Server), + ssl_test_lib:close(Client). + +%%-------------------------------------------------------------------- +recv_close() -> + [{doc,"Special case of call error handling"}]. +recv_close(Config) when is_list(Config) -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0}, + {from, self()}, + {mfa, {?MODULE, do_recv_close, []}}, + {options, [{active, false} | ServerOpts]}]), + Port = ssl_test_lib:inet_port(Server), + {_Client, #sslsocket{} = SslSocket} = ssl_test_lib:start_client([return_socket, + {node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {mfa, {ssl_test_lib, no_result, []}}, + {options, ClientOpts}]), + ssl:close(SslSocket), + ssl_test_lib:check_result(Server, ok). + + + +%%-------------------------------------------------------------------- +controlling_process() -> + [{doc,"Test API function controlling_process/2"}]. + +controlling_process(Config) when is_list(Config) -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + ClientMsg = "Server hello", + ServerMsg = "Client hello", + + Server = ssl_test_lib:start_server([ + {node, ServerNode}, {port, 0}, + {from, self()}, + {mfa, {?MODULE, + controlling_process_result, [self(), + ServerMsg]}}, + {options, ServerOpts}]), + Port = ssl_test_lib:inet_port(Server), + {Client, CSocket} = ssl_test_lib:start_client([return_socket, + {node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {mfa, {?MODULE, + controlling_process_result, [self(), + ClientMsg]}}, + {options, ClientOpts}]), + + ct:log("Testcase ~p, Client ~p Server ~p ~n", + [self(), Client, Server]), + + ServerMsg = ssl_test_lib:active_recv(CSocket, length(ServerMsg)), + %% We do not have the TLS server socket but all messages form the client + %% socket are now read, so ramining are form the server socket + ClientMsg = ssl_active_recv(length(ClientMsg)), + + ssl_test_lib:close(Server), + ssl_test_lib:close(Client). +%%-------------------------------------------------------------------- +controller_dies() -> + [{doc,"Test that the socket is closed after controlling process dies"}]. +controller_dies(Config) when is_list(Config) -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + ClientMsg = "Hello server", + ServerMsg = "Hello client", + + Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0}, + {from, self()}, + {mfa, {?MODULE, + controller_dies_result, [self(), + ServerMsg]}}, + {options, ServerOpts}]), + Port = ssl_test_lib:inet_port(Server), + Client = ssl_test_lib:start_client([{node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {mfa, {?MODULE, + controller_dies_result, [self(), + ClientMsg]}}, + {options, ClientOpts}]), + + ct:log("Testcase ~p, Client ~p Server ~p ~n", [self(), Client, Server]), + ct:sleep(?SLEEP), %% so that they are connected + + process_flag(trap_exit, true), + + %% Test that clients die + exit(Client, killed), + get_close(Client, ?LINE), + + %% Test that clients die when process disappear + Server ! listen, + Tester = self(), + Connect = fun(Pid) -> + {ok, Socket} = ssl:connect(Hostname, Port, ClientOpts), + %% Make sure server finishes and verification + %% and is in coonection state before + %% killing client + ct:sleep(?SLEEP), + Pid ! {self(), connected, Socket}, + receive die_nice -> normal end + end, + Client2 = spawn_link(fun() -> Connect(Tester) end), + receive {Client2, connected, _Socket} -> Client2 ! die_nice end, + + get_close(Client2, ?LINE), + + %% Test that clients die when the controlling process have changed + Server ! listen, + + Client3 = spawn_link(fun() -> Connect(Tester) end), + Controller = spawn_link(fun() -> receive die_nice -> normal end end), + receive + {Client3, connected, Socket} -> + ok = ssl:controlling_process(Socket, Controller), + Client3 ! die_nice + end, + + ct:log("Wating on exit ~p~n",[Client3]), + receive {'EXIT', Client3, normal} -> ok end, + + receive %% Client3 is dead but that doesn't matter, socket should not be closed. + Unexpected -> + ct:log("Unexpected ~p~n",[Unexpected]), + ct:fail({line, ?LINE-1}) + after 1000 -> + ok + end, + Controller ! die_nice, + get_close(Controller, ?LINE), + + %% Test that servers die + Server ! listen, + LastClient = ssl_test_lib:start_client([{node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {mfa, {?MODULE, + controller_dies_result, [self(), + ClientMsg]}}, + {options, ClientOpts}]), + ct:sleep(?SLEEP), %% so that they are connected + + exit(Server, killed), + get_close(Server, ?LINE), + process_flag(trap_exit, false), + ssl_test_lib:close(LastClient). +%%-------------------------------------------------------------------- +controlling_process_transport_accept_socket() -> + [{doc,"Only ssl:handshake and ssl:controlling_process is allowed for transport_accept:sockets"}]. +controlling_process_transport_accept_socket(Config) when is_list(Config) -> + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + + Server = ssl_test_lib:start_server_transport_control([{node, ServerNode}, + {port, 0}, + {from, self()}, + {options, ServerOpts}]), + Port = ssl_test_lib:inet_port(Server), + + _Client = ssl_test_lib:start_client_error([{node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {options, ClientOpts}]), + ssl_test_lib:check_result(Server, ok), + ssl_test_lib:close(Server). + +%%-------------------------------------------------------------------- +close_with_timeout() -> + [{doc,"Test normal (not downgrade) ssl:close/2"}]. +close_with_timeout(Config) when is_list(Config) -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + + Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0}, + {from, self()}, + {mfa, {?MODULE, tls_close, []}}, + {options,[{active, false} | ServerOpts]}]), + Port = ssl_test_lib:inet_port(Server), + Client = ssl_test_lib:start_client([{node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {mfa, {?MODULE, tls_close, []}}, + {options, [{active, false} |ClientOpts]}]), + + ssl_test_lib:check_result(Server, ok, Client, ok). + +%%-------------------------------------------------------------------- +close_in_error_state() -> + [{doc,"Special case of closing socket in error state"}]. +close_in_error_state(Config) when is_list(Config) -> + ServerOpts0 = ssl_test_lib:ssl_options(server_opts, Config), + ServerOpts = [{cacertfile, "foo.pem"} | proplists:delete(cacertfile, ServerOpts0)], + ClientOpts = ssl_test_lib:ssl_options(client_opts, Config), + _ = spawn_link(?MODULE, run_error_server_close, [[self() | ServerOpts]]), + receive + {_Pid, Port} -> + spawn_link(?MODULE, run_client_error, [[Port, ClientOpts]]) + end, + receive + ok -> + ok; + Other -> + ct:fail(Other) + end. + +%%-------------------------------------------------------------------- +call_in_error_state() -> + [{doc,"Special case of call error handling"}]. +call_in_error_state(Config) when is_list(Config) -> + ServerOpts0 = ssl_test_lib:ssl_options(server_opts, Config), + ClientOpts = ssl_test_lib:ssl_options(client_opts, Config), + ServerOpts = [{cacertfile, "foo.pem"} | proplists:delete(cacertfile, ServerOpts0)], + Pid = spawn_link(?MODULE, run_error_server, [[self() | ServerOpts]]), + receive + {Pid, Port} -> + spawn_link(?MODULE, run_client_error, [[Port, ClientOpts]]) + end, + receive + {error, closed} -> + ok; + Other -> + ct:fail(Other) + end. +%%-------------------------------------------------------------------- +close_transport_accept() -> + [{doc,"Tests closing ssl socket when waiting on ssl:transport_accept/1"}]. + +close_transport_accept(Config) when is_list(Config) -> + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + {_ClientNode, ServerNode, _Hostname} = ssl_test_lib:run_where(Config), + + Port = 0, + Opts = [{active, false} | ServerOpts], + {ok, ListenSocket} = rpc:call(ServerNode, ssl, listen, [Port, Opts]), + spawn_link(fun() -> + ct:sleep(?SLEEP), + rpc:call(ServerNode, ssl, close, [ListenSocket]) + end), + case rpc:call(ServerNode, ssl, transport_accept, [ListenSocket]) of + {error, closed} -> + ok; + Other -> + exit({?LINE, Other}) + end. +%%-------------------------------------------------------------------- +abuse_transport_accept_socket() -> + [{doc,"Only ssl:handshake and ssl:controlling_process is allowed for transport_accept:sockets"}]. +abuse_transport_accept_socket(Config) when is_list(Config) -> + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + + Server = ssl_test_lib:start_server_transport_abuse_socket([{node, ServerNode}, + {port, 0}, + {from, self()}, + {options, ServerOpts}]), + Port = ssl_test_lib:inet_port(Server), + Client = ssl_test_lib:start_client([{node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {mfa, {ssl_test_lib, no_result, []}}, + {options, ClientOpts}]), + ssl_test_lib:check_result(Server, ok), + ssl_test_lib:close(Server), + ssl_test_lib:close(Client). + +%%-------------------------------------------------------------------- + +invalid_keyfile() -> + [{doc,"Test what happens with an invalid key file"}]. +invalid_keyfile(Config) when is_list(Config) -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + BadKeyFile = filename:join([proplists:get_value(priv_dir, Config), + "badkey.pem"]), + BadOpts = [{keyfile, BadKeyFile}| proplists:delete(keyfile, ServerOpts)], + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + + Server = + ssl_test_lib:start_server_error([{node, ServerNode}, {port, 0}, + {from, self()}, + {options, BadOpts}]), + + Port = ssl_test_lib:inet_port(Server), + + Client = + ssl_test_lib:start_client_error([{node, ClientNode}, + {port, Port}, {host, Hostname}, + {from, self()}, {options, ClientOpts}]), + + File = proplists:get_value(keyfile,BadOpts), + ssl_test_lib:check_result(Server, {error,{options, {keyfile, File, {error,enoent}}}}, Client, + {error, closed}). + +%%-------------------------------------------------------------------- +honor_server_cipher_order() -> + [{doc,"Test API honor server cipher order."}]. +honor_server_cipher_order(Config) when is_list(Config) -> + ClientCiphers = [#{key_exchange => dhe_rsa, + cipher => aes_128_cbc, + mac => sha, + prf => default_prf}, + #{key_exchange => dhe_rsa, + cipher => aes_256_cbc, + mac => sha, + prf => default_prf}], + ServerCiphers = [#{key_exchange => dhe_rsa, + cipher => aes_256_cbc, + mac =>sha, + prf => default_prf}, + #{key_exchange => dhe_rsa, + cipher => aes_128_cbc, + mac => sha, + prf => default_prf}], + honor_cipher_order(Config, true, ServerCiphers, ClientCiphers, #{key_exchange => dhe_rsa, + cipher => aes_256_cbc, + mac => sha, + prf => default_prf}). + +%%-------------------------------------------------------------------- +honor_client_cipher_order() -> + [{doc,"Test API honor server cipher order."}]. +honor_client_cipher_order(Config) when is_list(Config) -> + ClientCiphers = [#{key_exchange => dhe_rsa, + cipher => aes_128_cbc, + mac => sha, + prf => default_prf}, + #{key_exchange => dhe_rsa, + cipher => aes_256_cbc, + mac => sha, + prf => default_prf}], + ServerCiphers = [#{key_exchange => dhe_rsa, + cipher => aes_256_cbc, + mac =>sha, + prf => default_prf}, + #{key_exchange => dhe_rsa, + cipher => aes_128_cbc, + mac => sha, + prf => default_prf}], + honor_cipher_order(Config, false, ServerCiphers, ClientCiphers, #{key_exchange => dhe_rsa, + cipher => aes_128_cbc, + mac => sha, + prf => default_prf}). + +%%-------------------------------------------------------------------- +ipv6() -> + [{require, ipv6_hosts}, + {doc,"Test ipv6."}]. +ipv6(Config) when is_list(Config) -> + {ok, Hostname0} = inet:gethostname(), + + case lists:member(list_to_atom(Hostname0), ct:get_config(ipv6_hosts)) of + true -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + {ClientNode, ServerNode, Hostname} = + ssl_test_lib:run_where(Config, ipv6), + Server = ssl_test_lib:start_server([{node, ServerNode}, + {port, 0}, {from, self()}, + {mfa, {ssl_test_lib, send_recv_result, []}}, + {options, + [inet6, {active, false} | ServerOpts]}]), + Port = ssl_test_lib:inet_port(Server), + Client = ssl_test_lib:start_client([{node, ClientNode}, + {port, Port}, {host, Hostname}, + {from, self()}, + {mfa, {ssl_test_lib, send_recv_result, []}}, + {options, + [inet6, {active, false} | ClientOpts]}]), + + ct:log("Testcase ~p, Client ~p Server ~p ~n", + [self(), Client, Server]), + + ssl_test_lib:check_result(Server, ok, Client, ok), + + ssl_test_lib:close(Server), + ssl_test_lib:close(Client); + false -> + {skip, "Host does not support IPv6"} + end. + +%%-------------------------------------------------------------------- +der_input() -> + [{doc,"Test to input certs and key as der"}]. + +der_input(Config) when is_list(Config) -> + DataDir = proplists:get_value(data_dir, Config), + DHParamFile = filename:join(DataDir, "dHParam.pem"), + + {status, _, _, StatusInfo} = sys:get_status(whereis(ssl_manager)), + [_, _,_, _, Prop] = StatusInfo, + State = ssl_test_lib:state(Prop), + [CADb | _] = element(6, State), + + Size = ets:info(CADb, size), + + SeverVerifyOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + {ServerCert, ServerKey, ServerCaCerts, DHParams} = der_input_opts([{dhfile, DHParamFile} | + SeverVerifyOpts]), + ClientVerifyOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + {ClientCert, ClientKey, ClientCaCerts, DHParams} = der_input_opts([{dhfile, DHParamFile} | + ClientVerifyOpts]), + ServerOpts = [{verify, verify_peer}, {fail_if_no_peer_cert, true}, + {dh, DHParams}, + {cert, ServerCert}, {key, ServerKey}, {cacerts, ServerCaCerts}], + ClientOpts = [{verify, verify_peer}, {fail_if_no_peer_cert, true}, + {dh, DHParams}, + {cert, ClientCert}, {key, ClientKey}, {cacerts, ClientCaCerts}], + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0}, + {from, self()}, + {mfa, {ssl_test_lib, send_recv_result, []}}, + {options, [{active, false} | ServerOpts]}]), + Port = ssl_test_lib:inet_port(Server), + Client = ssl_test_lib:start_client([{node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {mfa, {ssl_test_lib, send_recv_result, []}}, + {options, [{active, false} | ClientOpts]}]), + + ssl_test_lib:check_result(Server, ok, Client, ok), + ssl_test_lib:close(Server), + ssl_test_lib:close(Client), + Size = ets:info(CADb, size). + +%%-------------------------------------------------------------------- +invalid_certfile() -> + [{doc,"Test what happens with an invalid cert file"}]. + +invalid_certfile(Config) when is_list(Config) -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + BadCertFile = filename:join([proplists:get_value(priv_dir, Config), + "badcert.pem"]), + ServerBadOpts = [{certfile, BadCertFile}| proplists:delete(certfile, ServerOpts)], + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + + + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + + Server = + ssl_test_lib:start_server_error([{node, ServerNode}, {port, 0}, + {from, self()}, + {options, ServerBadOpts}]), + + Port = ssl_test_lib:inet_port(Server), + + Client = + ssl_test_lib:start_client_error([{node, ClientNode}, + {port, Port}, {host, Hostname}, + {from, self()}, + {options, ClientOpts}]), + File = proplists:get_value(certfile, ServerBadOpts), + ssl_test_lib:check_result(Server, {error,{options, {certfile, File, {error,enoent}}}}, + Client, {error, closed}). + + +%%-------------------------------------------------------------------- +invalid_cacertfile() -> + [{doc,"Test what happens with an invalid cacert file"}]. + +invalid_cacertfile(Config) when is_list(Config) -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + BadCACertFile = filename:join([proplists:get_value(priv_dir, Config), + "badcacert.pem"]), + ServerBadOpts = [{cacertfile, BadCACertFile}| proplists:delete(cacertfile, ServerOpts)], + + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + + Server0 = + ssl_test_lib:start_server_error([{node, ServerNode}, + {port, 0}, {from, self()}, + {options, ServerBadOpts}]), + + Port0 = ssl_test_lib:inet_port(Server0), + + + Client0 = + ssl_test_lib:start_client_error([{node, ClientNode}, + {port, Port0}, {host, Hostname}, + {from, self()}, + {options, ClientOpts}]), + + File0 = proplists:get_value(cacertfile, ServerBadOpts), + + ssl_test_lib:check_result(Server0, {error, {options, {cacertfile, File0,{error,enoent}}}}, + Client0, {error, closed}), + + File = File0 ++ "do_not_exit.pem", + ServerBadOpts1 = [{cacertfile, File}|proplists:delete(cacertfile, ServerBadOpts)], + + Server1 = + ssl_test_lib:start_server_error([{node, ServerNode}, + {port, 0}, {from, self()}, + {options, ServerBadOpts1}]), + + Port1 = ssl_test_lib:inet_port(Server1), + + Client1 = + ssl_test_lib:start_client_error([{node, ClientNode}, + {port, Port1}, {host, Hostname}, + {from, self()}, + {options, ClientOpts}]), + + + ssl_test_lib:check_result(Server1, {error, {options, {cacertfile, File,{error,enoent}}}}, + Client1, {error, closed}), + ok. + +%%-------------------------------------------------------------------- +new_options_in_handshake() -> + [{doc,"Test that you can set ssl options in handshake/3 and not only in tcp upgrade"}]. +new_options_in_handshake(Config) when is_list(Config) -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + Version = ssl_test_lib:protocol_version(Config), + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + + [_, Cipher | _] = ssl:filter_cipher_suites(ssl:cipher_suites(all, Version), + [{key_exchange, + fun(dhe_rsa) -> + true; + (ecdhe_rsa) -> + true; + (ecdh_rsa) -> + true; + (rsa) -> + true; + (_) -> + false + end + }]), + + Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0}, + {from, self()}, + {ssl_extra_opts, [{versions, [Version]}, + {ciphers,[Cipher]}]}, %% To be set in ssl_accept/3 + {mfa, {?MODULE, connection_info_result, []}}, + {options, ServerOpts}]), + + Port = ssl_test_lib:inet_port(Server), + Client = ssl_test_lib:start_client([{node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {mfa, {?MODULE, connection_info_result, []}}, + {options, [{ciphers, [Cipher]} | ClientOpts]}]), + + ct:log("Testcase ~p, Client ~p Server ~p ~n", + [self(), Client, Server]), + + ServerMsg = ClientMsg = {ok, {Version, Cipher}}, + + ssl_test_lib:check_result(Server, ServerMsg, Client, ClientMsg), + + ssl_test_lib:close(Server), + ssl_test_lib:close(Client). + +%%------------------------------------------------------------------- +max_handshake_size() -> + [{doc,"Test that we can set max_handshake_size to max value."}]. + +max_handshake_size(Config) when is_list(Config) -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0}, + {from, self()}, + {mfa, {ssl_test_lib, send_recv_result_active, []}}, + {options, [{max_handshake_size, 8388607} |ServerOpts]}]), + Port = ssl_test_lib:inet_port(Server), + + Client = ssl_test_lib:start_client([{node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {mfa, {ssl_test_lib, send_recv_result_active, []}}, + {options, [{max_handshake_size, 8388607} | ClientOpts]}]), + + ssl_test_lib:check_result(Server, ok, Client, ok). + + +%%------------------------------------------------------------------- +options_not_proplist() -> + [{doc,"Test what happens if an option is not a key value tuple"}]. + +options_not_proplist(Config) when is_list(Config) -> + BadOption = {client_preferred_next_protocols, + client, [<<"spdy/3">>,<<"http/1.1">>], <<"http/1.1">>}, + {option_not_a_key_value_tuple, BadOption} = + ssl:connect("twitter.com", 443, [binary, {active, false}, + BadOption]). + +%%------------------------------------------------------------------- +invalid_options() -> + [{doc,"Test what happens when we give invalid options"}]. + +invalid_options(Config) when is_list(Config) -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_verify_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + + Check = fun(Client, Server, {versions, [sslv2, sslv3]} = Option) -> + ssl_test_lib:check_result(Server, + {error, {options, {sslv2, Option}}}, + Client, + {error, {options, {sslv2, Option}}}); + (Client, Server, Option) -> + ssl_test_lib:check_result(Server, + {error, {options, Option}}, + Client, + {error, {options, Option}}) + end, + + TestOpts = + [{versions, [sslv2, sslv3]}, + {verify, 4}, + {verify_fun, function}, + {fail_if_no_peer_cert, 0}, + {verify_client_once, 1}, + {depth, four}, + {certfile, 'cert.pem'}, + {keyfile,'key.pem' }, + {password, foo}, + {cacertfile, ""}, + {dhfile,'dh.pem' }, + {ciphers, [{foo, bar, sha, ignore}]}, + {reuse_session, foo}, + {reuse_sessions, 0}, + {renegotiate_at, "10"}, + {mode, depech}, + {packet, 8.0}, + {packet_size, "2"}, + {header, a}, + {active, trice}, + {key, 'key.pem' }], + + [begin + Server = + ssl_test_lib:start_server_error([{node, ServerNode}, {port, 0}, + {from, self()}, + {options, [TestOpt | ServerOpts]}]), + %% Will never reach a point where port is used. + Client = + ssl_test_lib:start_client_error([{node, ClientNode}, {port, 0}, + {host, Hostname}, {from, self()}, + {options, [TestOpt | ClientOpts]}]), + Check(Client, Server, TestOpt), + ok + end || TestOpt <- TestOpts], + ok. +%%------------------------------------------------------------------- + +default_reject_anonymous()-> + [{doc,"Test that by default anonymous cipher suites are rejected "}]. +default_reject_anonymous(Config) when is_list(Config) -> + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + Version = ssl_test_lib:protocol_version(Config), + TLSVersion = ssl_test_lib:tls_version(Version), + + [CipherSuite | _] = ssl_test_lib:ecdh_dh_anonymous_suites(TLSVersion), + + Server = ssl_test_lib:start_server_error([{node, ServerNode}, {port, 0}, + {from, self()}, + {options, ServerOpts}]), + Port = ssl_test_lib:inet_port(Server), + Client = ssl_test_lib:start_client_error([{node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {options, + [{ciphers,[CipherSuite]} | + ClientOpts]}]), + + ssl_test_lib:check_server_alert(Server, Client, insufficient_security). + +%%------------------------------------------------------------------- +%% Note that these test only test that the options are valid to set. As application data +%% is a stream you can not test that the send acctually splits it up as when it arrives +%% again at the user layer it may be concatenated. But COVER can show that the split up +%% code has been run. + +rizzo_disabled() -> + [{doc, "Test original beast mitigation disable option for SSL 3.0 and TLS 1.0"}]. + +rizzo_disabled(Config) -> + ClientOpts = [{beast_mitigation, disabled} | ssl_test_lib:ssl_options(client_rsa_opts, Config)], + ServerOpts = [{beast_mitigation, disabled} | ssl_test_lib:ssl_options(server_rsa_opts, Config)], + + ssl_test_lib:basic_test(ClientOpts, ServerOpts, Config). +%%------------------------------------------------------------------- +rizzo_zero_n() -> + [{doc, "Test zero_n beast mitigation option (same affect as original disable option) for SSL 3.0 and TLS 1.0"}]. + +rizzo_zero_n(Config) -> + ClientOpts = [{beast_mitigation, zero_n} | ssl_test_lib:ssl_options(client_rsa_opts, Config)], + ServerOpts = [{beast_mitigation, zero_n} | ssl_test_lib:ssl_options(server_rsa_opts, Config)], + + ssl_test_lib:basic_test(ClientOpts, ServerOpts, Config). +%%------------------------------------------------------------------- +rizzo_one_n_minus_one () -> + [{doc, "Test beast_mitigation option one_n_minus_one (same affect as default) for SSL 3.0 and TLS 1.0"}]. + +rizzo_one_n_minus_one (Config) -> + ClientOpts = [{beast_mitigation, one_n_minus_one } | ssl_test_lib:ssl_options(client_rsa_opts, Config)], + ServerOpts = [{beast_mitigation, one_n_minus_one} | ssl_test_lib:ssl_options(server_rsa_opts, Config)], + + ssl_test_lib:basic_test(ClientOpts, ServerOpts, Config). + +supported_groups() -> + [{doc,"Test the supported_groups option in TLS 1.3."}]. + +supported_groups(Config) when is_list(Config) -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + + Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0}, + {from, self()}, + {mfa, {ssl_test_lib, send_recv_result_active, []}}, + {options, [{supported_groups, [x448, x25519]} | ServerOpts]}]), + Port = ssl_test_lib:inet_port(Server), + Client = ssl_test_lib:start_client([{node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {mfa, {ssl_test_lib, send_recv_result_active, []}}, + {options, [{supported_groups,[x448]} | ClientOpts]}]), + + ssl_test_lib:check_result(Server, ok, Client, ok), + + ssl_test_lib:close(Server), + ssl_test_lib:close(Client). + +%%-------------------------------------------------------------------- +honor_client_cipher_order_tls13() -> + [{doc,"Test API honor server cipher order in TLS 1.3."}]. +honor_client_cipher_order_tls13(Config) when is_list(Config) -> + ClientCiphers = [#{key_exchange => any, + cipher => aes_256_gcm, + mac => aead, + prf => sha384}, + #{key_exchange => any, + cipher => aes_128_gcm, + mac => aead, + prf => sha256}], + ServerCiphers = [#{key_exchange => any, + cipher => aes_128_gcm, + mac => aead, + prf => sha256}, + #{key_exchange => any, + cipher => aes_256_gcm, + mac => aead, + prf => sha384}], + honor_cipher_order(Config, false, ServerCiphers, ClientCiphers, #{key_exchange => any, + cipher => aes_256_gcm, + mac => aead, + prf => sha384}). + +%%-------------------------------------------------------------------- +honor_server_cipher_order_tls13() -> + [{doc,"Test API honor server cipher order in TLS 1.3."}]. +honor_server_cipher_order_tls13(Config) when is_list(Config) -> + ClientCiphers = [#{key_exchange => any, + cipher => aes_256_gcm, + mac => aead, + prf => sha384}, + #{key_exchange => any, + cipher => aes_128_gcm, + mac => aead, + prf => sha256}], + ServerCiphers = [#{key_exchange => any, + cipher => aes_128_gcm, + mac => aead, + prf => sha256}, + #{key_exchange => any, + cipher => aes_256_gcm, + mac => aead, + prf => sha384}], + honor_cipher_order(Config, true, ServerCiphers, ClientCiphers, #{key_exchange => any, + cipher => aes_128_gcm, + mac => aead, + prf => sha256}). + + +%%-------------------------------------------------------------------- +%% Internal functions ------------------------------------------------ +%%-------------------------------------------------------------------- + +peercert_result(Socket) -> + ssl:peercert(Socket). + +connection_information_result(Socket) -> + {ok, Info = [_ | _]} = ssl:connection_information(Socket), + case length(Info) > 3 of + true -> + %% Atleast one ssl_option() is set + ct:log("Info ~p", [Info]), + ok; + false -> + ct:fail(no_ssl_options_returned) + end. +secret_connection_info_result(Socket) -> + {ok, [{protocol, Protocol}]} = ssl:connection_information(Socket, [protocol]), + {ok, ConnInfo} = ssl:connection_information(Socket, [client_random, server_random, master_secret]), + check_connection_info(Protocol, ConnInfo). + + +%% In TLS 1.3 the master_secret field is used to store multiple secrets from the key schedule and it is a tuple. +%% client_random and server_random are not used in the TLS 1.3 key schedule. +check_connection_info('tlsv1.3', [{client_random, ClientRand}, {master_secret, {master_secret, MasterSecret}}]) -> + is_binary(ClientRand) andalso is_binary(MasterSecret); +check_connection_info('tlsv1.3', [{server_random, ServerRand}, {master_secret, {master_secret, MasterSecret}}]) -> + is_binary(ServerRand) andalso is_binary(MasterSecret); +check_connection_info(_, [{client_random, ClientRand}, {server_random, ServerRand}, {master_secret, MasterSecret}]) -> + is_binary(ClientRand) andalso is_binary(ServerRand) andalso is_binary(MasterSecret); +check_connection_info(_, _) -> + false. + + +prf_create_plan(TlsVersions, PRFs, Results) -> + lists:foldl(fun(Ver, Acc) -> + A = prf_ciphers_and_expected(Ver, PRFs, Results), + [A|Acc] + end, [], TlsVersions). + +prf_ciphers_and_expected(TlsVer, PRFs, Results) -> + case TlsVer of + TlsVer when TlsVer == sslv3 orelse TlsVer == tlsv1 + orelse TlsVer == 'tlsv1.1' orelse TlsVer == 'dtlsv1' -> + Ciphers = ssl:cipher_suites(), + {_, Expected} = lists:keyfind(md5sha, 1, Results), + [[{tls_ver, TlsVer}, {ciphers, Ciphers}, {expected, Expected}, {prf, md5sha}]]; + TlsVer when TlsVer == 'tlsv1.2' orelse TlsVer == 'dtlsv1.2'-> + lists:foldl( + fun(PRF, Acc) -> + Ciphers = prf_get_ciphers(TlsVer, PRF), + case Ciphers of + [] -> + ct:log("No ciphers for PRF algorithm ~p. Skipping.", [PRF]), + Acc; + Ciphers -> + {_, Expected} = lists:keyfind(PRF, 1, Results), + [[{tls_ver, TlsVer}, {ciphers, Ciphers}, {expected, Expected}, + {prf, PRF}] | Acc] + end + end, [], PRFs) + end. + +prf_get_ciphers(_, PRF) -> + lists:filter( + fun(C) when tuple_size(C) == 4 andalso + element(4, C) == PRF -> + true; + (_) -> + false + end, + ssl:cipher_suites()). + +prf_run_test(_, TlsVer, [], _, Prf) -> + ct:fail({error, cipher_list_empty, TlsVer, Prf}); +prf_run_test(Config, TlsVer, Ciphers, Expected, Prf) -> + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + BaseOpts = [{active, true}, {versions, [TlsVer]}, {ciphers, Ciphers}, {protocol, tls_or_dtls(TlsVer)}], + ServerOpts = BaseOpts ++ proplists:get_value(server_opts, Config), + ClientOpts = BaseOpts ++ proplists:get_value(client_opts, Config), + Server = ssl_test_lib:start_server( + [{node, ServerNode}, {port, 0}, {from, self()}, + {mfa, {?MODULE, prf_verify_value, [TlsVer, Expected, Prf]}}, + {options, ServerOpts}]), + Port = ssl_test_lib:inet_port(Server), + Client = ssl_test_lib:start_client( + [{node, ClientNode}, {port, Port}, + {host, Hostname}, {from, self()}, + {mfa, {?MODULE, prf_verify_value, [TlsVer, Expected, Prf]}}, + {options, ClientOpts}]), + ssl_test_lib:check_result(Server, ok, Client, ok), + ssl_test_lib:close(Server), + ssl_test_lib:close(Client). + +prf_verify_value(Socket, TlsVer, Expected, Algo) -> + Ret = ssl:prf(Socket, <<>>, <<>>, [<<>>], 16), + case TlsVer of + sslv3 -> + case Ret of + {error, undefined} -> ok; + _ -> + {error, {expected, {error, undefined}, + got, Ret, tls_ver, TlsVer, prf_algorithm, Algo}} + end; + _ -> + case Ret of + {ok, Expected} -> ok; + {ok, Val} -> {error, {expected, Expected, got, Val, tls_ver, TlsVer, + prf_algorithm, Algo}} + end + end. + +tls_or_dtls('dtlsv1') -> + dtls; +tls_or_dtls('dtlsv1.2') -> + dtls; +tls_or_dtls(_) -> + tls. + +active_n_common(S, N) -> + ok = ssl:setopts(S, [{active,-N}]), + receive + {ssl_passive, S} -> ok + after + 1000 -> + error({error,ssl_passive_failure}) + end, + [{active,false}] = ok(ssl:getopts(S, [active])), + ok = ssl:setopts(S, [{active,0}]), + receive + {ssl_passive, S} -> ok + after + 1000 -> + error({error,ssl_passive_failure}) + end, + ok = ssl:setopts(S, [{active,32767}]), + {error,{options,_}} = ssl:setopts(S, [{active,1}]), + {error,{options,_}} = ssl:setopts(S, [{active,-32769}]), + ok = ssl:setopts(S, [{active,-32768}]), + receive + {ssl_passive, S} -> ok + after + 1000 -> + error({error,ssl_passive_failure}) + end, + [{active,false}] = ok(ssl:getopts(S, [active])), + ok = ssl:setopts(S, [{active,N}]), + ok = ssl:setopts(S, [{active,true}]), + [{active,true}] = ok(ssl:getopts(S, [active])), + receive + _ -> error({error,active_n}) + after + 0 -> + ok + end, + ok = ssl:setopts(S, [{active,N}]), + ok = ssl:setopts(S, [{active,once}]), + [{active,once}] = ok(ssl:getopts(S, [active])), + receive + _ -> error({error,active_n}) + after + 0 -> + ok + end, + {error,{options,_}} = ssl:setopts(S, [{active,32768}]), + ok = ssl:setopts(S, [{active,false}]), + [{active,false}] = ok(ssl:getopts(S, [active])), + ok. + +ok({ok,V}) -> V. + +repeat(N, Fun) -> + repeat(N, N, Fun). + +repeat(N, T, Fun) when is_integer(N), N > 0 -> + Fun(T-N), + repeat(N-1, T, Fun); +repeat(_, _, _) -> + ok. + +try_recv_active(Socket) -> + ssl:send(Socket, "Hello world"), + {error, einval} = ssl:recv(Socket, 11), + ok. +try_recv_active_once(Socket) -> + {error, einval} = ssl:recv(Socket, 11), + ok. + +controlling_process_result(Socket, Pid, Msg) -> + ok = ssl:controlling_process(Socket, Pid), + %% Make sure other side has evaluated controlling_process + %% before message is sent + ct:sleep(?SLEEP), + ssl:send(Socket, Msg), + no_result_msg. + +controller_dies_result(_Socket, _Pid, _Msg) -> + receive Result -> Result end. +get_close(Pid, Where) -> + receive + {'EXIT', Pid, _Reason} -> + receive + {_, {ssl_closed, Socket}} -> + ct:log("Socket closed ~p~n",[Socket]); + Unexpected -> + ct:log("Unexpected ~p~n",[Unexpected]), + ct:fail({line, ?LINE-1}) + after 5000 -> + ct:fail({timeout, {line, ?LINE, Where}}) + end; + Unexpected -> + ct:log("Unexpected ~p~n",[Unexpected]), + ct:fail({line, ?LINE-1}) + after 5000 -> + ct:fail({timeout, {line, ?LINE, Where}}) + end. + +ssl_active_recv(N) -> + ssl_active_recv(N, []). + +ssl_active_recv(0, Acc) -> + Acc; +ssl_active_recv(N, Acc) -> + receive + {ssl, _, Bytes} -> + ssl_active_recv(N-length(Bytes), Acc ++ Bytes) + end. + +send_recv_result_timeout_client(Socket) -> + {error, timeout} = ssl:recv(Socket, 11, 500), + {error, timeout} = ssl:recv(Socket, 11, 0), + ssl:send(Socket, "Hello world"), + receive + Msg -> + io:format("Msg ~p~n",[Msg]) + after 500 -> + ok + end, + {ok, "Hello world"} = ssl:recv(Socket, 11, 500), + ok. +send_recv_result_timeout_server(Socket) -> + ssl:send(Socket, "Hello"), + {ok, "Hello world"} = ssl:recv(Socket, 11), + ssl:send(Socket, " world"), + ok. + +do_recv_close(Socket) -> + {error, closed} = ssl:recv(Socket, 11), + receive + {_,{error,closed}} -> + error_extra_close_sent_to_user_process + after 500 -> + ok + end. + +tls_close(Socket) -> + ok = ssl_test_lib:send_recv_result(Socket), + case ssl:close(Socket, 5000) of + ok -> + ok; + {error, closed} -> + ok; + Other -> + ct:fail(Other) + end. + +run_error_server_close([Pid | Opts]) -> + {ok, Listen} = ssl:listen(0, Opts), + {ok,{_, Port}} = ssl:sockname(Listen), + Pid ! {self(), Port}, + {ok, Socket} = ssl:transport_accept(Listen), + Pid ! ssl:close(Socket). + +run_error_server([ Pid | Opts]) -> + {ok, Listen} = ssl:listen(0, Opts), + {ok,{_, Port}} = ssl:sockname(Listen), + Pid ! {self(), Port}, + {ok, Socket} = ssl:transport_accept(Listen), + Pid ! ssl:controlling_process(Socket, self()). + +run_client_error([Port, Opts]) -> + ssl:connect("localhost", Port, Opts). + +honor_cipher_order(Config, Honor, ServerCiphers, ClientCiphers, Expected) -> + ClientOpts = ssl_test_lib:ssl_options(client_rsa_opts, Config), + ServerOpts = ssl_test_lib:ssl_options(server_rsa_opts, Config), + + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + + Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0}, + {from, self()}, + {mfa, {?MODULE, connection_info_result, []}}, + {options, [{ciphers, ServerCiphers}, {honor_cipher_order, Honor} + | ServerOpts]}]), + Port = ssl_test_lib:inet_port(Server), + Client = ssl_test_lib:start_client([{node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {mfa, {?MODULE, connection_info_result, []}}, + {options, [{ciphers, ClientCiphers}, {honor_cipher_order, Honor} + | ClientOpts]}]), + + Version = ssl_test_lib:protocol_version(Config), + + ServerMsg = ClientMsg = {ok, {Version, Expected}}, + + ssl_test_lib:check_result(Server, ServerMsg, Client, ClientMsg), + + ssl_test_lib:close(Server), + ssl_test_lib:close(Client). + +connection_info_result(Socket) -> + {ok, Info} = ssl:connection_information(Socket, [protocol, selected_cipher_suite]), + {ok, {proplists:get_value(protocol, Info), proplists:get_value(selected_cipher_suite, Info)}}. + +der_input_opts(Opts) -> + Certfile = proplists:get_value(certfile, Opts), + CaCertsfile = proplists:get_value(cacertfile, Opts), + Keyfile = proplists:get_value(keyfile, Opts), + Dhfile = proplists:get_value(dhfile, Opts), + [{_, Cert, _}] = ssl_test_lib:pem_to_der(Certfile), + [{Asn1Type, Key, _}] = ssl_test_lib:pem_to_der(Keyfile), + [{_, DHParams, _}] = ssl_test_lib:pem_to_der(Dhfile), + CaCerts = + lists:map(fun(Entry) -> + {_, CaCert, _} = Entry, + CaCert + end, ssl_test_lib:pem_to_der(CaCertsfile)), + {Cert, {Asn1Type, Key}, CaCerts, DHParams}. |