diff options
Diffstat (limited to 'lib/stdlib/doc')
73 files changed, 2957 insertions, 738 deletions
diff --git a/lib/stdlib/doc/src/Makefile b/lib/stdlib/doc/src/Makefile index 6f1e61e70c..ff77c3eea0 100644 --- a/lib/stdlib/doc/src/Makefile +++ b/lib/stdlib/doc/src/Makefile @@ -71,6 +71,7 @@ XML_REF3_FILES = \ lib.xml \ lists.xml \ log_mf_h.xml \ + maps.xml \ math.xml \ ms_transform.xml \ orddict.xml \ diff --git a/lib/stdlib/doc/src/array.xml b/lib/stdlib/doc/src/array.xml index a79fcd487e..b03a2fa0cc 100644 --- a/lib/stdlib/doc/src/array.xml +++ b/lib/stdlib/doc/src/array.xml @@ -1,9 +1,9 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>2007</year><year>2011</year> + <year>2007</year><year>2014</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -84,7 +84,7 @@ the default value cannot be confused with the values of set entries.</p> {'EXIT',{badarg,_}} = (catch array:get(18, A3)).</pre></description> <datatypes> <datatype> - <name><marker id="type-array">array()</marker></name> + <name name="array" n_vars="1"/> <desc> <p>A functional, extendible array. The representation is not documented and is subject to change without notice. Note that @@ -92,6 +92,12 @@ the default value cannot be confused with the values of set entries.</p> </desc> </datatype> <datatype> + <name name="array" n_vars="0"/> + <desc> + <p><c>array()</c> is equivalent to <c>array(term())</c>.</p> + </desc> + </datatype> + <datatype> <name name="array_indx"/> </datatype> <datatype> @@ -189,7 +195,7 @@ the default value cannot be confused with the values of set entries.</p> <desc><marker id="from_orddict-2"/> -<p>Convert an ordered list of pairs <c>{Index, Value}</c> to a +<p>Convert an ordered list of pairs <c>{Index, <anno>Value</anno>}</c> to a corresponding extendible array. <c><anno>Default</anno></c> is used as the value for uninitialized entries of the array. If <c><anno>Orddict</anno></c> is not a proper, ordered list of pairs whose first elements are nonnegative @@ -455,7 +461,7 @@ cannot be changed once the array has been created.</p> <desc><marker id="sparse_to_orddict-1"/> -<p>Convert the array to an ordered list of pairs <c>{Index, Value}</c>, +<p>Convert the array to an ordered list of pairs <c>{Index, <anno>Value</anno>}</c>, skipping default-valued entries. </p> <p><em>See also:</em> <seealso marker="#to_orddict-1">to_orddict/1</seealso>.</p> @@ -476,7 +482,7 @@ cannot be changed once the array has been created.</p> <desc><marker id="to_orddict-1"/> -<p>Convert the array to an ordered list of pairs <c>{Index, Value}</c>. +<p>Convert the array to an ordered list of pairs <c>{Index, <anno>Value</anno>}</c>. </p> <p><em>See also:</em> <seealso marker="#from_orddict-2">from_orddict/2</seealso>, <seealso marker="#sparse_to_orddict-1">sparse_to_orddict/1</seealso>.</p> </desc></func></funcs> diff --git a/lib/stdlib/doc/src/base64.xml b/lib/stdlib/doc/src/base64.xml index f90a82187d..c4982f4eaa 100644 --- a/lib/stdlib/doc/src/base64.xml +++ b/lib/stdlib/doc/src/base64.xml @@ -1,4 +1,4 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> diff --git a/lib/stdlib/doc/src/beam_lib.xml b/lib/stdlib/doc/src/beam_lib.xml index db65eb3848..eb4974a79f 100644 --- a/lib/stdlib/doc/src/beam_lib.xml +++ b/lib/stdlib/doc/src/beam_lib.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>2000</year><year>2011</year> + <year>2000</year><year>2013</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/binary.xml b/lib/stdlib/doc/src/binary.xml index 06cfad0b0b..2410f1f9b8 100644 --- a/lib/stdlib/doc/src/binary.xml +++ b/lib/stdlib/doc/src/binary.xml @@ -1,11 +1,11 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> <year>2009</year> - <year>2012</year> + <year>2013</year> <holder>Ericsson AB, All Rights Reserved</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/book.xml b/lib/stdlib/doc/src/book.xml index 10ee6f3855..b1b67d661c 100644 --- a/lib/stdlib/doc/src/book.xml +++ b/lib/stdlib/doc/src/book.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE book SYSTEM "book.dtd"> <book xmlns:xi="http://www.w3.org/2001/XInclude"> <header titlestyle="normal"> <copyright> - <year>1997</year><year>2009</year> + <year>1997</year><year>2013</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/c.xml b/lib/stdlib/doc/src/c.xml index f2e3d8fb44..b49fa6ad67 100644 --- a/lib/stdlib/doc/src/c.xml +++ b/lib/stdlib/doc/src/c.xml @@ -1,4 +1,4 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> diff --git a/lib/stdlib/doc/src/calendar.xml b/lib/stdlib/doc/src/calendar.xml index f8db48e00c..e32a639b81 100644 --- a/lib/stdlib/doc/src/calendar.xml +++ b/lib/stdlib/doc/src/calendar.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>1996</year><year>2011</year> + <year>1996</year><year>2013</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/dets.xml b/lib/stdlib/doc/src/dets.xml index 215ec154ed..6bbedb0662 100644 --- a/lib/stdlib/doc/src/dets.xml +++ b/lib/stdlib/doc/src/dets.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>1996</year><year>2011</year> + <year>1996</year><year>2013</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/dict.xml b/lib/stdlib/doc/src/dict.xml index b01acd02bf..0771682a25 100644 --- a/lib/stdlib/doc/src/dict.xml +++ b/lib/stdlib/doc/src/dict.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>1996</year><year>2011</year> + <year>1996</year><year>2014</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -41,9 +41,15 @@ <datatypes> <datatype> - <name><marker id="type-dict">dict()</marker></name> + <name name="dict" n_vars="2"/> <desc><p>Dictionary as returned by <c>new/0</c>.</p></desc> </datatype> + <datatype> + <name name="dict" n_vars="0"/> + <desc> + <p><c>dict()</c> is equivalent to <c>dict(term(), term())</c>.</p> + </desc> + </datatype> </datatypes> <funcs> <func> @@ -115,7 +121,7 @@ <c><anno>Dict</anno></c> together with an extra argument <c>Acc</c> (short for accumulator). <c><anno>Fun</anno></c> must return a new accumulator which is passed to the next call. <c><anno>Acc0</anno></c> is - returned if the list is empty. The evaluation order is + returned if the dict is empty. The evaluation order is undefined.</p> </desc> </func> @@ -177,6 +183,13 @@ merge(Fun, D1, D2) -> </desc> </func> <func> + <name name="is_empty" arity="1"/> + <fsummary>Return true if the dictionary is empty</fsummary> + <desc> + <p>Returns <c>true</c> if <c><anno>Dict</anno></c> has no elements, <c>false</c> otherwise.</p> + </desc> + </func> + <func> <name name="store" arity="3"/> <fsummary>Store a value in a dictionary</fsummary> <desc> diff --git a/lib/stdlib/doc/src/digraph.xml b/lib/stdlib/doc/src/digraph.xml index 0afc70ebe0..9b9b48584b 100644 --- a/lib/stdlib/doc/src/digraph.xml +++ b/lib/stdlib/doc/src/digraph.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>1996</year><year>2011</year> + <year>1996</year><year>2014</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -98,7 +98,7 @@ <name name="d_protection"/> </datatype> <datatype> - <name><marker id="type-digraph">digraph()</marker></name> + <name name="graph"/> <desc><p>A digraph as returned by <c>new/0,1</c>.</p></desc> </datatype> <datatype> diff --git a/lib/stdlib/doc/src/digraph_utils.xml b/lib/stdlib/doc/src/digraph_utils.xml index ef6e1cb46f..ef6f9d8611 100644 --- a/lib/stdlib/doc/src/digraph_utils.xml +++ b/lib/stdlib/doc/src/digraph_utils.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>2000</year><year>2012</year> + <year>2000</year><year>2013</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/epp.xml b/lib/stdlib/doc/src/epp.xml index df7bf883fc..452341f7d2 100644 --- a/lib/stdlib/doc/src/epp.xml +++ b/lib/stdlib/doc/src/epp.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>1996</year><year>2013</year> + <year>1996</year><year>2014</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -46,8 +46,10 @@ valid encodings are <c>Latin-1</c> and <c>UTF-8</c> where the case of the characters can be chosen freely. Examples:</p> <pre> -%% coding: utf-8 -%% For this file we have chosen encoding = Latin-1 +%% coding: utf-8</pre> + <pre> +%% For this file we have chosen encoding = Latin-1</pre> + <pre> %% -*- coding: latin-1 -*-</pre> </description> <datatypes> @@ -64,11 +66,29 @@ </datatypes> <funcs> <func> + <name name="open" arity="1"/> + <fsummary>Open a file for preprocessing</fsummary> + <desc> + <p>Opens a file for preprocessing.</p> + <p>If <c>extra</c> is given in + <c><anno>Options</anno></c>, the return value will be + <c>{ok, <anno>Epp</anno>, <anno>Extra</anno>}</c> instead + of <c>{ok, <anno>Epp</anno>}</c>.</p> + </desc> + </func> + <func> <name name="open" arity="2"/> + <fsummary>Open a file for preprocessing</fsummary> + <desc> + <p>Equivalent to <c>epp:open([{name, FileName}, {includes, IncludePath}])</c>.</p> + </desc> + </func> + <func> <name name="open" arity="3"/> <fsummary>Open a file for preprocessing</fsummary> <desc> - <p>Opens a file for preprocessing.</p> + <p>Equivalent to <c>epp:open([{name, FileName}, {includes, IncludePath}, + {macros, PredefMacros}])</c>.</p> </desc> </func> <func> @@ -89,12 +109,24 @@ </desc> </func> <func> - <name name="parse_file" arity="3"/> + <name name="parse_file" arity="2"/> <fsummary>Preprocess and parse an Erlang source file</fsummary> <desc> <p>Preprocesses and parses an Erlang source file. - Note that the tuple <c>{eof, <anno>Line</anno>}</c> returned at end-of-file is - included as a "form".</p> + Note that the tuple <c>{eof, <anno>Line</anno>}</c> returned + at end-of-file is included as a "form".</p> + <p>If <c>extra</c> is given in + <c><anno>Options</anno></c>, the return value will be + <c>{ok, [<anno>Form</anno>], <anno>Extra</anno>}</c> instead + of <c>{ok, [<anno>Form</anno>]}</c>.</p> + </desc> + </func> + <func> + <name name="parse_file" arity="3"/> + <fsummary>Preprocess and parse an Erlang source file</fsummary> + <desc> + <p>Equivalent to <c>epp:parse_file(FileName, [{includes, IncludePath}, + {macros, PredefMacros}])</c>.</p> </desc> </func> <func> @@ -111,7 +143,7 @@ <p>Returns a string representation of an encoding. The string is recognized by <c>read_encoding/1,2</c>, <c>read_encoding_from_binary/1,2</c>, and - <c>set_encoding/1</c> as a valid encoding.</p> + <c>set_encoding/1,2</c> as a valid encoding.</p> </desc> </func> <func> @@ -157,6 +189,22 @@ </desc> </func> <func> + <name name="set_encoding" arity="2"/> + <fsummary>Read and set the encoding of an IO device</fsummary> + <desc> + <p>Reads the <seealso marker="#encoding">encoding</seealso> from + an IO device and sets the encoding of the device + accordingly. The position of the IO device referenced by + <c><anno>File</anno></c> is not affected. If no valid + encoding can be read from the IO device the encoding of the + IO device is set to the + <seealso marker="#encoding">encoding</seealso> given by + <c><anno>Default</anno></c>.</p> + <p>Returns the read encoding, or <c>none</c> if no valid + encoding was found.</p> + </desc> + </func> + <func> <name name="format_error" arity="1"/> <fsummary>Format an error descriptor</fsummary> <desc> diff --git a/lib/stdlib/doc/src/erl_eval.xml b/lib/stdlib/doc/src/erl_eval.xml index fd78788a45..b707dbcc02 100644 --- a/lib/stdlib/doc/src/erl_eval.xml +++ b/lib/stdlib/doc/src/erl_eval.xml @@ -1,4 +1,4 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> diff --git a/lib/stdlib/doc/src/erl_expand_records.xml b/lib/stdlib/doc/src/erl_expand_records.xml index 8ead438b31..1b5ee5de36 100644 --- a/lib/stdlib/doc/src/erl_expand_records.xml +++ b/lib/stdlib/doc/src/erl_expand_records.xml @@ -1,11 +1,11 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> <year>2005</year> - <year>2011</year> + <year>2013</year> <holder>Ericsson AB, All Rights Reserved</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/erl_id_trans.xml b/lib/stdlib/doc/src/erl_id_trans.xml index 18cc2460f9..0f7042f0c6 100644 --- a/lib/stdlib/doc/src/erl_id_trans.xml +++ b/lib/stdlib/doc/src/erl_id_trans.xml @@ -1,11 +1,11 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> <year>1996</year> - <year>2011</year> + <year>2013</year> <holder>Ericsson AB, All Rights Reserved</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/erl_internal.xml b/lib/stdlib/doc/src/erl_internal.xml index b8d5ad73b3..54e560f8b9 100644 --- a/lib/stdlib/doc/src/erl_internal.xml +++ b/lib/stdlib/doc/src/erl_internal.xml @@ -1,11 +1,11 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> <year>1996</year> - <year>2011</year> + <year>2013</year> <holder>Ericsson AB, All Rights Reserved</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/erl_lint.xml b/lib/stdlib/doc/src/erl_lint.xml index b7fbdd8799..1ca58baf9a 100644 --- a/lib/stdlib/doc/src/erl_lint.xml +++ b/lib/stdlib/doc/src/erl_lint.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>1996</year><year>2011</year> + <year>1996</year><year>2013</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/erl_parse.xml b/lib/stdlib/doc/src/erl_parse.xml index 56a7131821..cf0bff48cd 100644 --- a/lib/stdlib/doc/src/erl_parse.xml +++ b/lib/stdlib/doc/src/erl_parse.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>1996</year><year>2013</year> + <year>1996</year><year>2014</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -173,6 +173,7 @@ </func> <func> <name name="abstract" arity="2"/> + <type name="encoding_func"/> <fsummary>Convert an Erlang term into an abstract form</fsummary> <desc> <p>Converts the Erlang data structure <c><anno>Data</anno></c> into an @@ -183,7 +184,12 @@ selecting which integer lists will be considered as strings. The default is to use the encoding returned by <seealso marker="epp#default_encoding/0"> - <c>epp:default_encoding/0</c></seealso></p> + <c>epp:default_encoding/0</c></seealso>. + The value <c>none</c> means that no integer lists will be + considered as strings. The <c>encoding_func()</c> will be + called with one integer of a list at a time, and if it + returns <c>true</c> for every integer the list will be + considered a string.</p> </desc> </func> </funcs> diff --git a/lib/stdlib/doc/src/erl_pp.xml b/lib/stdlib/doc/src/erl_pp.xml index 9ae4f3d91f..005c101973 100644 --- a/lib/stdlib/doc/src/erl_pp.xml +++ b/lib/stdlib/doc/src/erl_pp.xml @@ -1,11 +1,11 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> <year>1996</year> - <year>2012</year> + <year>2013</year> <holder>Ericsson AB, All Rights Reserved</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/erl_scan.xml b/lib/stdlib/doc/src/erl_scan.xml index 54240dea19..855c8fc195 100644 --- a/lib/stdlib/doc/src/erl_scan.xml +++ b/lib/stdlib/doc/src/erl_scan.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>1996</year><year>2011</year> + <year>1996</year><year>2013</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/erl_tar.xml b/lib/stdlib/doc/src/erl_tar.xml index fe166dbd01..95eefb8f9b 100644 --- a/lib/stdlib/doc/src/erl_tar.xml +++ b/lib/stdlib/doc/src/erl_tar.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>2003</year><year>2011</year> + <year>2003</year><year>2013</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -35,10 +35,11 @@ <modulesummary>Unix 'tar' utility for reading and writing tar archives</modulesummary> <description> <p>The <c>erl_tar</c> module archives and extract files to and from - a tar file. The tar file format is the POSIX extended tar file format - specified in IEEE Std 1003.1 and ISO/IEC 9945-1. That is the same - format as used by <c>tar</c> program on Solaris, but is not the same - as used by the GNU tar program.</p> + a tar file. <c>erl_tar</c> supports the <c>ustar</c> format + (IEEE Std 1003.1 and ISO/IEC 9945-1). All modern <c>tar</c> + programs (including GNU tar) can read this format. To ensure that + that GNU tar produces a tar file that <c>erl_tar</c> can read, + give the <c>--format=ustar</c> option to GNU tar.</p> <p>By convention, the name of a tar file should end in "<c>.tar</c>". To abide to the convention, you'll need to add "<c>.tar</c>" yourself to the name.</p> @@ -65,6 +66,26 @@ </description> <section> + <title>UNICODE SUPPORT</title> + <p>If <seealso + marker="kernel:file#native_name_encoding/0">file:native_name_encoding/0</seealso> + returns <c>utf8</c>, path names will be encoded in UTF-8 when + creating tar files and path names will be assumed to be encoded in + UTF-8 when extracting tar files.</p> + + <p>If <seealso + marker="kernel:file#native_name_encoding/0">file:native_name_encoding/0</seealso> + returns <c>latin1</c>, no translation of path names will be + done.</p> + </section> + + <section> + <title>OTHER STORAGE MEDIA</title> + <p>The <c>erl_ftp</c> module normally accesses the tar-file on disk using the <seealso marker="kernel:file">file module</seealso>. When other needs arise, there is a way to define your own low-level Erlang functions to perform the writing and reading on the storage media. See <seealso marker="#init/3">init/3</seealso> for usage.</p> + <p>An example of this is the sftp support in <seealso marker="ssh:ssh_sftp#open_tar/3">ssh_sftp:open_tar/3</seealso>. That function opens a tar file on a remote machine using an sftp channel.</p> + </section> + + <section> <title>LIMITATIONS</title> <p>For maximum compatibility, it is safe to archive files with names up to 100 characters in length. Such tar files can generally be @@ -84,7 +105,8 @@ <v>TarDescriptor = term()</v> <v>Filename = filename()</v> <v>Options = [Option]</v> - <v>Option = dereference|verbose</v> + <v>Option = dereference|verbose|{chunks,ChunkSize}</v> + <v>ChunkSize = positive_integer()</v> <v>RetValue = ok|{error,{Filename,Reason}}</v> <v>Reason = term()</v> </type> @@ -104,6 +126,12 @@ <item> <p>Print an informational message about the file being added.</p> </item> + <tag><c>{chunks,ChunkSize}</c></tag> + <item> + <p>Read data in parts from the file. This is intended for memory-limited + machines that for example builds a tar file on a remote machine over + <seealso marker="ssh:ssh_sftp#open_tar/3">sftp</seealso>.</p> + </item> </taglist> </desc> </func> @@ -112,8 +140,8 @@ <fsummary>Add a file to an open tar file</fsummary> <type> <v>TarDescriptor = term()</v> - <v>FilenameOrBin = Filename()|binary()</v> - <v>Filename = filename()()</v> + <v>FilenameOrBin = filename()|binary()</v> + <v>Filename = filename()</v> <v>NameInArchive = filename()</v> <v>Options = [Option]</v> <v>Option = dereference|verbose</v> @@ -374,6 +402,101 @@ </warning> </desc> </func> + + <func> + <name>init(UserPrivate, AccessMode, Fun) -> {ok,TarDescriptor} | {error,Reason} +</name> + <fsummary>Creates a TarDescriptor used in subsequent tar operations when + defining own low-level storage access functions + </fsummary> + <type> + <v>UserPrivate = term()</v> + <v>AccessMode = [write] | [read]</v> + <v>Fun when AccessMode is [write] = fun(write, {UserPrivate,DataToWrite})->...; + (position,{UserPrivate,Position})->...; + (close, UserPrivate)->... + end + </v> + <v>Fun when AccessMode is [read] = fun(read2, {UserPrivate,Size})->...; + (position,{UserPrivate,Position})->...; + (close, UserPrivate)->... + end + </v> + <v>TarDescriptor = term()</v> + <v>Reason = term()</v> + </type> + <desc> + <p>The <c>Fun</c> is the definition of what to do when the different + storage operations functions are to be called from the higher tar + handling functions (<c>add/3</c>, <c>add/4</c>, <c>close/1</c>...). + </p> + <p>The <c>Fun</c> will be called when the tar function wants to do + a low-level operation, like writing a block to a file. The Fun is called + as <c>Fun(Op,{UserPrivate,Parameters...})</c> where <c>Op</c> is the operation name, + <c>UserPrivate</c> is the term passed as the first argument to <c>init/1</c> and + <c>Parameters...</c> are the data added by the tar function to be passed down to + the storage handling function. + </p> + <p>The parameter <c>UserPrivate</c> is typically the result of opening a low level + structure like a file descriptor, a sftp channel id or such. The different <c>Fun</c> + clauses operates on that very term. + </p> + <p>The fun clauses parameter lists are: + <taglist> + <tag><c>(write, {UserPrivate,DataToWrite})</c></tag> + <item>Write the term <c>DataToWrite</c> using <c>UserPrivate</c></item> + <tag><c>(close, UserPrivate)</c></tag> + <item>Close the access.</item> + <tag><c>(read2, {UserPrivate,Size})</c></tag> + <item>Read using <c>UserPrivate</c> but only <c>Size</c> bytes. Note that there is + only an arity-2 read function, not an arity-1 + </item> + <tag><c> (position,{UserPrivate,Position})</c></tag> + <item>Sets the position of <c>UserPrivate</c> as defined for files in <seealso marker="kernel:file#position-2">file:position/2</seealso></item> + <tag><c></c></tag> + <item></item> + </taglist> + </p> + <p>A complete <c>Fun</c> parameter for reading and writing on files using the + <seealso marker="kernel:file">file module</seealso> could be: + </p> + <code type="none"> + ExampleFun = + fun(write, {Fd,Data}) -> file:write(Fd, Data); + (position, {Fd,Pos}) -> file:position(Fd, Pos); + (read2, {Fd,Size}) -> file:read(Fd,Size); + (close, Fd) -> file:close(Fd) + end + </code> + <p>where <c>Fd</c> was given to the <c>init/3</c> function as:</p> + <code> + {ok,Fd} = file:open(Name,...). + {ok,TarDesc} = erl_tar:init(Fd, [write], ExampleFun), + </code> + <p>The <c>TarDesc</c> is then used:</p> + <code> + erl_tar:add(TarDesc, SomeValueIwantToAdd, FileNameInTarFile), + ...., + erl_tar:close(TarDesc) + </code> + <p>When the erl_tar core wants to e.g. write a piece of Data, it would call + <c>ExampleFun(write,{UserPrivate,Data})</c>. + </p> + <note> + <p>The example above with <c>file</c> module operations is not necessary to + use directly since that is what the <seealso marker="#open">open</seealso> function + in principle does. + </p> + </note> + <warning> + <p>The <c>TarDescriptor</c> term is not a file descriptor. + You should not rely on the specific contents of the <c>TarDescriptor</c> + term, as it may change in future versions as more features are added + to the <c>erl_tar</c> module.</p> + </warning> + </desc> + </func> + <func> <name>table(Name) -> RetValue</name> <fsummary>Retrieve the name of all files in a tar file</fsummary> diff --git a/lib/stdlib/doc/src/ets.xml b/lib/stdlib/doc/src/ets.xml index 6db1ae3aa3..3df24bf688 100644 --- a/lib/stdlib/doc/src/ets.xml +++ b/lib/stdlib/doc/src/ets.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>1996</year><year>2013</year> + <year>1996</year><year>2014</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -171,6 +171,10 @@ <p>Returns a list of all tables at the node. Named tables are given by their names, unnamed tables are given by their table identifiers.</p> + <p>There is no guarantee of consistency in the returned list. Tables created + or deleted by other processes "during" the ets:all() call may or may + not be included in the list. Only tables created/deleted <em>before</em> + ets:all() is called are guaranteed to be included/excluded.</p> </desc> </func> <func> diff --git a/lib/stdlib/doc/src/fascicules.xml b/lib/stdlib/doc/src/fascicules.xml index b30d34186e..0ded9007e0 100644 --- a/lib/stdlib/doc/src/fascicules.xml +++ b/lib/stdlib/doc/src/fascicules.xml @@ -1,4 +1,4 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE fascicules SYSTEM "fascicules.dtd"> <fascicules> diff --git a/lib/stdlib/doc/src/file_sorter.xml b/lib/stdlib/doc/src/file_sorter.xml index a6b3633066..16572df3c5 100644 --- a/lib/stdlib/doc/src/file_sorter.xml +++ b/lib/stdlib/doc/src/file_sorter.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>2001</year><year>2011</year> + <year>2001</year><year>2013</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/filelib.xml b/lib/stdlib/doc/src/filelib.xml index d24d17be80..6fa39f97f6 100644 --- a/lib/stdlib/doc/src/filelib.xml +++ b/lib/stdlib/doc/src/filelib.xml @@ -1,4 +1,4 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> diff --git a/lib/stdlib/doc/src/filename.xml b/lib/stdlib/doc/src/filename.xml index 9296319b83..49b652f969 100644 --- a/lib/stdlib/doc/src/filename.xml +++ b/lib/stdlib/doc/src/filename.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>1997</year><year>2011</year> + <year>1997</year><year>2013</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/gb_sets.xml b/lib/stdlib/doc/src/gb_sets.xml index f91fac9c82..ea96c14472 100644 --- a/lib/stdlib/doc/src/gb_sets.xml +++ b/lib/stdlib/doc/src/gb_sets.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>2001</year><year>2011</year> + <year>2001</year><year>2014</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -115,28 +115,40 @@ <datatypes> <datatype> - <name><marker id="type-gb_set">gb_set()</marker></name> + <name name="set" n_vars="1"/> <desc><p>A GB set.</p></desc> </datatype> <datatype> - <name name="iter"/> + <name name="set" n_vars="0"/> + <desc> + <p><c>set()</c> is equivalent to <c>set(term())</c>.</p> + </desc> + </datatype> + <datatype> + <name name="iter" n_vars="1"/> <desc><p>A GB set iterator.</p></desc> </datatype> + <datatype> + <name name="iter" n_vars="0"/> + <desc> + <p><c>iter()</c> is equivalent to <c>iter(term())</c>.</p> + </desc> + </datatype> </datatypes> <funcs> <func> <name name="add" arity="2"/> <name name="add_element" arity="2"/> - <fsummary>Add a (possibly existing) element to a gb_set</fsummary> + <fsummary>Add a (possibly existing) element to a set</fsummary> <desc> - <p>Returns a new gb_set formed from <c><anno>Set1</anno></c> with + <p>Returns a new set formed from <c><anno>Set1</anno></c> with <c><anno>Element</anno></c> inserted. If <c><anno>Element</anno></c> is already an element in <c><anno>Set1</anno></c>, nothing is changed.</p> </desc> </func> <func> <name name="balance" arity="1"/> - <fsummary>Rebalance tree representation of a gb_set</fsummary> + <fsummary>Rebalance tree representation of a set</fsummary> <desc> <p>Rebalances the tree representation of <c><anno>Set1</anno></c>. Note that this is rarely necessary, but may be motivated when a large @@ -148,9 +160,9 @@ </func> <func> <name name="delete" arity="2"/> - <fsummary>Remove an element from a gb_set</fsummary> + <fsummary>Remove an element from a set</fsummary> <desc> - <p>Returns a new gb_set formed from <c><anno>Set1</anno></c> with + <p>Returns a new set formed from <c><anno>Set1</anno></c> with <c><anno>Element</anno></c> removed. Assumes that <c><anno>Element</anno></c> is present in <c><anno>Set1</anno></c>.</p> </desc> @@ -158,9 +170,9 @@ <func> <name name="delete_any" arity="2"/> <name name="del_element" arity="2"/> - <fsummary>Remove a (possibly non-existing) element from a gb_set</fsummary> + <fsummary>Remove a (possibly non-existing) element from a set</fsummary> <desc> - <p>Returns a new gb_set formed from <c><anno>Set1</anno></c> with + <p>Returns a new set formed from <c><anno>Set1</anno></c> with <c><anno>Element</anno></c> removed. If <c><anno>Element</anno></c> is not an element in <c><anno>Set1</anno></c>, nothing is changed.</p> </desc> @@ -168,7 +180,7 @@ <func> <name name="difference" arity="2"/> <name name="subtract" arity="2"/> - <fsummary>Return the difference of two gb_sets</fsummary> + <fsummary>Return the difference of two sets</fsummary> <desc> <p>Returns only the elements of <c><anno>Set1</anno></c> which are not also elements of <c><anno>Set2</anno></c>.</p> @@ -177,14 +189,14 @@ <func> <name name="empty" arity="0"/> <name name="new" arity="0"/> - <fsummary>Return an empty gb_set</fsummary> + <fsummary>Return an empty set</fsummary> <desc> - <p>Returns a new empty gb_set.</p> + <p>Returns a new empty set.</p> </desc> </func> <func> <name name="filter" arity="2"/> - <fsummary>Filter gb_set elements</fsummary> + <fsummary>Filter set elements</fsummary> <desc> <p>Filters elements in <c><anno>Set1</anno></c> using predicate function <c><anno>Pred</anno></c>.</p> @@ -192,7 +204,7 @@ </func> <func> <name name="fold" arity="3"/> - <fsummary>Fold over gb_set elements</fsummary> + <fsummary>Fold over set elements</fsummary> <desc> <p>Folds <c><anno>Function</anno></c> over every element in <c><anno>Set</anno></c> returning the final value of the accumulator.</p> @@ -200,46 +212,46 @@ </func> <func> <name name="from_list" arity="1"/> - <fsummary>Convert a list into a gb_set</fsummary> + <fsummary>Convert a list into a set</fsummary> <desc> - <p>Returns a gb_set of the elements in <c><anno>List</anno></c>, where + <p>Returns a set of the elements in <c><anno>List</anno></c>, where <c><anno>List</anno></c> may be unordered and contain duplicates.</p> </desc> </func> <func> <name name="from_ordset" arity="1"/> - <fsummary>Make a gb_set from an ordset list</fsummary> + <fsummary>Make a set from an ordset list</fsummary> <desc> - <p>Turns an ordered-set list <c><anno>List</anno></c> into a gb_set. The list + <p>Turns an ordered-set list <c><anno>List</anno></c> into a set. The list must not contain duplicates.</p> </desc> </func> <func> <name name="insert" arity="2"/> - <fsummary>Add a new element to a gb_set</fsummary> + <fsummary>Add a new element to a set</fsummary> <desc> - <p>Returns a new gb_set formed from <c><anno>Set1</anno></c> with + <p>Returns a new set formed from <c><anno>Set1</anno></c> with <c><anno>Element</anno></c> inserted. Assumes that <c><anno>Element</anno></c> is not present in <c><anno>Set1</anno></c>.</p> </desc> </func> <func> <name name="intersection" arity="2"/> - <fsummary>Return the intersection of two gb_sets</fsummary> + <fsummary>Return the intersection of two sets</fsummary> <desc> <p>Returns the intersection of <c><anno>Set1</anno></c> and <c><anno>Set2</anno></c>.</p> </desc> </func> <func> <name name="intersection" arity="1"/> - <fsummary>Return the intersection of a list of gb_sets</fsummary> + <fsummary>Return the intersection of a list of sets</fsummary> <desc> - <p>Returns the intersection of the non-empty list of gb_sets.</p> + <p>Returns the intersection of the non-empty list of sets.</p> </desc> </func> <func> <name name="is_disjoint" arity="2"/> - <fsummary>Check whether two gb_sets are disjoint</fsummary> + <fsummary>Check whether two sets are disjoint</fsummary> <desc> <p>Returns <c>true</c> if <c><anno>Set1</anno></c> and <c><anno>Set2</anno></c> are disjoint (have no elements in common), @@ -248,7 +260,7 @@ </func> <func> <name name="is_empty" arity="1"/> - <fsummary>Test for empty gb_set</fsummary> + <fsummary>Test for empty set</fsummary> <desc> <p>Returns <c>true</c> if <c><anno>Set</anno></c> is an empty set, and <c>false</c> otherwise.</p> @@ -257,7 +269,7 @@ <func> <name name="is_member" arity="2"/> <name name="is_element" arity="2"/> - <fsummary>Test for membership of a gb_set</fsummary> + <fsummary>Test for membership of a set</fsummary> <desc> <p>Returns <c>true</c> if <c><anno>Element</anno></c> is an element of <c><anno>Set</anno></c>, otherwise <c>false</c>.</p> @@ -265,9 +277,9 @@ </func> <func> <name name="is_set" arity="1"/> - <fsummary>Test for a gb_set</fsummary> + <fsummary>Test for a set</fsummary> <desc> - <p>Returns <c>true</c> if <c><anno>Term</anno></c> appears to be a gb_set, + <p>Returns <c>true</c> if <c><anno>Term</anno></c> appears to be a set, otherwise <c>false</c>.</p> </desc> </func> @@ -281,7 +293,7 @@ </func> <func> <name name="iterator" arity="1"/> - <fsummary>Return an iterator for a gb_set</fsummary> + <fsummary>Return an iterator for a set</fsummary> <desc> <p>Returns an iterator that can be used for traversing the entries of <c><anno>Set</anno></c>; see <c>next/1</c>. The implementation @@ -303,7 +315,7 @@ </func> <func> <name name="next" arity="1"/> - <fsummary>Traverse a gb_set with an iterator</fsummary> + <fsummary>Traverse a set with an iterator</fsummary> <desc> <p>Returns <c>{<anno>Element</anno>, <anno>Iter2</anno>}</c> where <c><anno>Element</anno></c> is the smallest element referred to by the iterator <c><anno>Iter1</anno></c>, @@ -314,14 +326,14 @@ </func> <func> <name name="singleton" arity="1"/> - <fsummary>Return a gb_set with one element</fsummary> + <fsummary>Return a set with one element</fsummary> <desc> - <p>Returns a gb_set containing only the element <c><anno>Element</anno></c>.</p> + <p>Returns a set containing only the element <c><anno>Element</anno></c>.</p> </desc> </func> <func> <name name="size" arity="1"/> - <fsummary>Return the number of elements in a gb_set</fsummary> + <fsummary>Return the number of elements in a set</fsummary> <desc> <p>Returns the number of elements in <c><anno>Set</anno></c>.</p> </desc> @@ -356,24 +368,24 @@ </func> <func> <name name="to_list" arity="1"/> - <fsummary>Convert a gb_set into a list</fsummary> + <fsummary>Convert a set into a list</fsummary> <desc> <p>Returns the elements of <c><anno>Set</anno></c> as a list.</p> </desc> </func> <func> <name name="union" arity="2"/> - <fsummary>Return the union of two gb_sets</fsummary> + <fsummary>Return the union of two sets</fsummary> <desc> - <p>Returns the merged (union) gb_set of <c><anno>Set1</anno></c> and + <p>Returns the merged (union) set of <c><anno>Set1</anno></c> and <c><anno>Set2</anno></c>.</p> </desc> </func> <func> <name name="union" arity="1"/> - <fsummary>Return the union of a list of gb_sets</fsummary> + <fsummary>Return the union of a list of sets</fsummary> <desc> - <p>Returns the merged (union) gb_set of the list of gb_sets.</p> + <p>Returns the merged (union) set of the list of sets.</p> </desc> </func> </funcs> diff --git a/lib/stdlib/doc/src/gb_trees.xml b/lib/stdlib/doc/src/gb_trees.xml index 9316d60b1a..b2f237e1d7 100644 --- a/lib/stdlib/doc/src/gb_trees.xml +++ b/lib/stdlib/doc/src/gb_trees.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>2001</year><year>2011</year> + <year>2001</year><year>2014</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -59,13 +59,25 @@ <datatypes> <datatype> - <name><marker id="type-gb_tree">gb_tree()</marker></name> + <name name="tree" n_vars="2"/> <desc><p>A GB tree.</p></desc> </datatype> <datatype> - <name name="iter"/> + <name name="tree" n_vars="0"/> + <desc> + <p><c>tree()</c> is equivalent to <c>tree(term(), term())</c>.</p> + </desc> + </datatype> + <datatype> + <name name="iter" n_vars="2"/> <desc><p>A GB tree iterator.</p></desc> </datatype> + <datatype> + <name name="iter" n_vars="0"/> + <desc> + <p><c>iter()</c> is equivalent to <c>iter(term(), term())</c>.</p> + </desc> + </datatype> </datatypes> <funcs> <func> @@ -108,9 +120,9 @@ <name name="enter" arity="3"/> <fsummary>Insert or update key with value in a tree</fsummary> <desc> - <p>Inserts <c><anno>Key</anno></c> with value <c><anno>Val</anno></c> into <c><anno>Tree1</anno></c> if + <p>Inserts <c><anno>Key</anno></c> with value <c><anno>Value</anno></c> into <c><anno>Tree1</anno></c> if the key is not present in the tree, otherwise updates - <c><anno>Key</anno></c> to value <c><anno>Val</anno></c> in <c><anno>Tree1</anno></c>. Returns the + <c><anno>Key</anno></c> to value <c><anno>Value</anno></c> in <c><anno>Tree1</anno></c>. Returns the new tree.</p> </desc> </func> @@ -135,7 +147,7 @@ <name name="insert" arity="3"/> <fsummary>Insert a new key and value in a tree</fsummary> <desc> - <p>Inserts <c><anno>Key</anno></c> with value <c><anno>Val</anno></c> into <c><anno>Tree1</anno></c>; + <p>Inserts <c><anno>Key</anno></c> with value <c><anno>Value</anno></c> into <c><anno>Tree1</anno></c>; returns the new tree. Assumes that the key is not present in the tree, crashes otherwise.</p> </desc> @@ -181,8 +193,8 @@ <name name="largest" arity="1"/> <fsummary>Return largest key and value</fsummary> <desc> - <p>Returns <c>{<anno>Key</anno>, <anno>Val</anno>}</c>, where <c><anno>Key</anno></c> is the largest - key in <c><anno>Tree</anno></c>, and <c><anno>Val</anno></c> is the value associated + <p>Returns <c>{<anno>Key</anno>, <anno>Value</anno>}</c>, where <c><anno>Key</anno></c> is the largest + key in <c><anno>Tree</anno></c>, and <c><anno>Value</anno></c> is the value associated with this key. Assumes that the tree is nonempty.</p> </desc> </func> @@ -191,7 +203,7 @@ <fsummary>Look up a key in a tree</fsummary> <desc> <p>Looks up <c><anno>Key</anno></c> in <c><anno>Tree</anno></c>; returns - <c>{value, <anno>Val</anno>}</c>, or <c>none</c> if <c><anno>Key</anno></c> is not + <c>{value, <anno>Value</anno>}</c>, or <c>none</c> if <c><anno>Key</anno></c> is not present.</p> </desc> </func> @@ -207,7 +219,7 @@ <name name="next" arity="1"/> <fsummary>Traverse a tree with an iterator</fsummary> <desc> - <p>Returns <c>{<anno>Key</anno>, <anno>Val</anno>, <anno>Iter2</anno>}</c> where <c><anno>Key</anno></c> is the + <p>Returns <c>{<anno>Key</anno>, <anno>Value</anno>, <anno>Iter2</anno>}</c> where <c><anno>Key</anno></c> is the smallest key referred to by the iterator <c><anno>Iter1</anno></c>, and <c><anno>Iter2</anno></c> is the new iterator to be used for traversing the remaining nodes, or the atom <c>none</c> if no @@ -225,8 +237,8 @@ <name name="smallest" arity="1"/> <fsummary>Return smallest key and value</fsummary> <desc> - <p>Returns <c>{<anno>Key</anno>, <anno>Val</anno>}</c>, where <c><anno>Key</anno></c> is the smallest - key in <c><anno>Tree</anno></c>, and <c><anno>Val</anno></c> is the value associated + <p>Returns <c>{<anno>Key</anno>, <anno>Value</anno>}</c>, where <c><anno>Key</anno></c> is the smallest + key in <c><anno>Tree</anno></c>, and <c><anno>Value</anno></c> is the value associated with this key. Assumes that the tree is nonempty.</p> </desc> </func> @@ -234,8 +246,8 @@ <name name="take_largest" arity="1"/> <fsummary>Extract largest key and value</fsummary> <desc> - <p>Returns <c>{<anno>Key</anno>, <anno>Val</anno>, <anno>Tree2</anno>}</c>, where <c><anno>Key</anno></c> is the - largest key in <c><anno>Tree1</anno></c>, <c><anno>Val</anno></c> is the value + <p>Returns <c>{<anno>Key</anno>, <anno>Value</anno>, <anno>Tree2</anno>}</c>, where <c><anno>Key</anno></c> is the + largest key in <c><anno>Tree1</anno></c>, <c><anno>Value</anno></c> is the value associated with this key, and <c><anno>Tree2</anno></c> is this tree with the corresponding node deleted. Assumes that the tree is nonempty.</p> @@ -245,8 +257,8 @@ <name name="take_smallest" arity="1"/> <fsummary>Extract smallest key and value</fsummary> <desc> - <p>Returns <c>{<anno>Key</anno>, <anno>Val</anno>, <anno>Tree2</anno>}</c>, where <c><anno>Key</anno></c> is the - smallest key in <c><anno>Tree1</anno></c>, <c><anno>Val</anno></c> is the value + <p>Returns <c>{<anno>Key</anno>, <anno>Value</anno>, <anno>Tree2</anno>}</c>, where <c><anno>Key</anno></c> is the + smallest key in <c><anno>Tree1</anno></c>, <c><anno>Value</anno></c> is the value associated with this key, and <c><anno>Tree2</anno></c> is this tree with the corresponding node deleted. Assumes that the tree is nonempty.</p> @@ -263,7 +275,7 @@ <name name="update" arity="3"/> <fsummary>Update a key to new value in a tree</fsummary> <desc> - <p>Updates <c><anno>Key</anno></c> to value <c><anno>Val</anno></c> in <c><anno>Tree1</anno></c>; + <p>Updates <c><anno>Key</anno></c> to value <c><anno>Value</anno></c> in <c><anno>Tree1</anno></c>; returns the new tree. Assumes that the key is present in the tree.</p> </desc> diff --git a/lib/stdlib/doc/src/gen_event.xml b/lib/stdlib/doc/src/gen_event.xml index 1601ea9892..b9dfff833e 100644 --- a/lib/stdlib/doc/src/gen_event.xml +++ b/lib/stdlib/doc/src/gen_event.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>1996</year><year>2012</year> + <year>1996</year><year>2013</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/gen_fsm.xml b/lib/stdlib/doc/src/gen_fsm.xml index 73c1911f1e..848d57f3e6 100644 --- a/lib/stdlib/doc/src/gen_fsm.xml +++ b/lib/stdlib/doc/src/gen_fsm.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>1996</year><year>2011</year> + <year>1996</year><year>2013</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -115,7 +115,7 @@ gen_fsm:sync_send_all_state_event -----> Module:handle_sync_event/4 If <c>FsmName={global,GlobalName}</c>, the gen_fsm is registered globally as <c>GlobalName</c> using <c>global:register_name/2</c>. - If <c>EventMgrName={via,Module,ViaName}</c>, the event manager will + If <c>FsmName={via,Module,ViaName}</c>, the gen_fsm will register with the registry represented by <c>Module</c>. The <c>Module</c> callback should export the functions <c>register_name/2</c>, <c>unregister_name/1</c>, @@ -210,7 +210,7 @@ gen_fsm:sync_send_all_state_event -----> Module:handle_sync_event/4 registered at another node, or</item> <item><c>{global,GlobalName}</c>, if the gen_fsm is globally registered.</item> - <item><c>{via,Module,ViaName}</c>, if the event manager is registered + <item><c>{via,Module,ViaName}</c>, if the gen_fsm is registered through an alternative process registry.</item> </list> <p><c>Event</c> is an arbitrary term which is passed as one of diff --git a/lib/stdlib/doc/src/gen_server.xml b/lib/stdlib/doc/src/gen_server.xml index abb4c73c7b..62c0394479 100644 --- a/lib/stdlib/doc/src/gen_server.xml +++ b/lib/stdlib/doc/src/gen_server.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>1996</year><year>2012</year> + <year>1996</year><year>2013</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -113,7 +113,7 @@ gen_server:abcast -----> Module:handle_cast/2 registered globally as <c>GlobalName</c> using <c>global:register_name/2</c>. If no name is provided, the gen_server is not registered. - If <c>EventMgrName={via,Module,ViaName}</c>, the event manager will + If <c>ServerName={via,Module,ViaName}</c>, the gen_server will register with the registry represented by <c>Module</c>. The <c>Module</c> callback should export the functions <c>register_name/2</c>, <c>unregister_name/1</c>, diff --git a/lib/stdlib/doc/src/io.xml b/lib/stdlib/doc/src/io.xml index 90f24c4cbc..a28180b42a 100644 --- a/lib/stdlib/doc/src/io.xml +++ b/lib/stdlib/doc/src/io.xml @@ -1,4 +1,4 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> diff --git a/lib/stdlib/doc/src/io_lib.xml b/lib/stdlib/doc/src/io_lib.xml index 68352ffeb1..3312b08064 100644 --- a/lib/stdlib/doc/src/io_lib.xml +++ b/lib/stdlib/doc/src/io_lib.xml @@ -1,4 +1,4 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> diff --git a/lib/stdlib/doc/src/io_protocol.xml b/lib/stdlib/doc/src/io_protocol.xml index d36bf2042f..21da404c35 100644 --- a/lib/stdlib/doc/src/io_protocol.xml +++ b/lib/stdlib/doc/src/io_protocol.xml @@ -1,11 +1,11 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE chapter SYSTEM "chapter.dtd"> <chapter> <header> <copyright> <year>1999</year> - <year>2012</year> + <year>2013</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -49,7 +49,7 @@ current I/O-protocol.</p> <p>The original I/O-protocol was simple and flexible. Demands for spacial and execution time efficiency has triggered extensions to the protocol over the years, making the protocol larger and somewhat less easy to -implement than the original. It can certainly be argumented that the +implement than the original. It can certainly be argued that the current protocol is too complex, but this text describes how it looks today, not how it should have looked.</p> @@ -76,10 +76,11 @@ the server eventually sends a corresponding <c>io_reply</c> tuple.</p> the I/O server sends the IO reply to.</item> <item><c>ReplyAs</c> can be any datum and is returned in the corresponding -<c>io_reply</c>. The <seealso marker="stdlib:io">io</seealso> module simply uses the pid() -of the I/O server as the <c>ReplyAs</c> datum, but a more complicated client +<c>io_reply</c>. The <seealso marker="stdlib:io">io</seealso> module monitors +the I/O server, and uses the monitor reference as the <c>ReplyAs</c> datum. +A more complicated client could have several outstanding I/O requests to the same I/O server and -would then use i.e. a <c>reference()</c> or something else to differentiate among +would then use different references (or something else) to differentiate among the incoming IO replies. The <c>ReplyAs</c> element should be considered opaque by the I/O server. Note that the <c>pid()</c> of the I/O server is not explicitly present in the <c>io_reply</c> tuple. The reply can be sent from any diff --git a/lib/stdlib/doc/src/lib.xml b/lib/stdlib/doc/src/lib.xml index 19fb827cbf..30f164826c 100644 --- a/lib/stdlib/doc/src/lib.xml +++ b/lib/stdlib/doc/src/lib.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>1996</year><year>2011</year> + <year>1996</year><year>2013</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/lists.xml b/lib/stdlib/doc/src/lists.xml index 16f81bdba1..ee3c51c62c 100644 --- a/lib/stdlib/doc/src/lists.xml +++ b/lib/stdlib/doc/src/lists.xml @@ -1,4 +1,4 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> @@ -123,6 +123,14 @@ </desc> </func> <func> + <name name="droplast" arity="1"/> + <fsummary>Drop the last element of a list</fsummary> + <desc> + <p>Drops the last element of a <c><anno>List</anno></c>. The list should + be non-empty, otherwise the function will crash with a <c>function_clause</c></p> + </desc> + </func> + <func> <name name="dropwhile" arity="2"/> <fsummary>Drop elements from a list while a predicate is true</fsummary> <desc> diff --git a/lib/stdlib/doc/src/log_mf_h.xml b/lib/stdlib/doc/src/log_mf_h.xml index f2b09b58eb..3ef659f579 100644 --- a/lib/stdlib/doc/src/log_mf_h.xml +++ b/lib/stdlib/doc/src/log_mf_h.xml @@ -1,11 +1,11 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> <year>1996</year> - <year>2011</year> + <year>2013</year> <holder>Ericsson AB, All Rights Reserved</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/maps.xml b/lib/stdlib/doc/src/maps.xml new file mode 100644 index 0000000000..f766c843be --- /dev/null +++ b/lib/stdlib/doc/src/maps.xml @@ -0,0 +1,355 @@ +<?xml version="1.0" encoding="utf-8" ?> +<!DOCTYPE erlref SYSTEM "erlref.dtd"> + +<erlref> + <header> + <copyright> + <year>2013</year><year>2014</year> + <holder>Ericsson AB. All Rights Reserved.</holder> + </copyright> + <legalnotice> + The contents of this file are subject to the Erlang Public License, + Version 1.1, (the "License"); you may not use this file except in + compliance with the License. You should have received a copy of the + Erlang Public License along with this software. If not, it can be + retrieved online at http://www.erlang.org/. + + Software distributed under the License is distributed on an "AS IS" + basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + the License for the specific language governing rights and limitations + under the License. + </legalnotice> + <title>maps</title> + <prepared>Björn-Egil Dahlberg</prepared> + <docno>1</docno> + <date>2014-02-28</date> + <rev>A</rev> + </header> + <module>maps</module> + <modulesummary>Maps Processing Functions</modulesummary> + <description> + <p>This module contains functions for maps processing.</p> + </description> + <funcs> + + <func> + <name name="find" arity="2"/> + <fsummary></fsummary> + <desc> + <p> + Returns a tuple <c>{ok, Value}</c> where <c><anno>Value</anno></c> is the value associated with <c><anno>Key</anno></c>, + or <c>error</c> if no value is associated with <c><anno>Key</anno></c> in <c><anno>Map</anno></c>. + </p> + <p>Example:</p> + <code type="none"> +> Map = #{"hi" => 42}, + Key = "hi", + maps:find(Key,Map). +{ok,42} </code> + </desc> + </func> + + <func> + <name name="fold" arity="3"/> + <fsummary></fsummary> + <desc> + <p> + Calls <c>F(K, V, AccIn)</c> for every <c><anno>K</anno></c> to value <c><anno>V</anno></c> + association in <c><anno>Map</anno></c> in + arbitrary order. The function <c>fun F/3</c> must return a new accumulator + which is passed to the next successive call. <c>maps:fold/3</c> returns the final + value of the accumulator. The initial accumulator value <c><anno>Init</anno></c> is returned if + the map is empty. + </p> + <p>Example:</p> + <code type="none"> +> Fun = fun(K,V,AccIn) when is_list(K) -> AccIn + V end, + Map = #{"k1" => 1, "k2" => 2, "k3" => 3}, + maps:fold(Fun,0,Map). +6</code> + </desc> + </func> + + <func> + <name name="from_list" arity="1"/> + <fsummary></fsummary> + <desc> + <p> + The function takes a list of key-value tuples elements and builds a + map. The associations may be in any order and both keys and values in the + association may be of any term. If the same key appears more than once, + the latter (rightmost) value is used and the previous values are ignored. + </p> + <p>Example:</p> + <code type="none"> +> List = [{"a",ignored},{1337,"value two"},{42,value_three},{"a",1}], + maps:from_list(List). +#{42 => value_three,1337 => "value two","a" => 1}</code> + </desc> + </func> + + <func> + <name name="get" arity="2"/> + <fsummary></fsummary> + <desc> + <p> + Returns the value <c><anno>Value</anno></c> associated with <c><anno>Key</anno></c> if + <c><anno>Map</anno></c> contains <c><anno>Key</anno></c>. + If no value is associated with <c><anno>Key</anno></c> then the call will + fail with an exception. + </p> + <p>Example:</p> + <code type="none"> +> Key = 1337, + Map = #{42 => value_two,1337 => "value one","a" => 1}, + maps:get(Key,Map). +"value one"</code> + </desc> + </func> + + <func> + <name name="get" arity="3"/> + <fsummary></fsummary> + <desc> + <p> + Returns the value <c><anno>Value</anno></c> associated with <c><anno>Key</anno></c> if + <c><anno>Map</anno></c> contains <c><anno>Key</anno></c>. + If no value is associated with <c><anno>Key</anno></c> then returns <c><anno>Default</anno></c>. + </p> + <p>Example:</p> + <code type="none"> +> Map = #{ key1 => val1, key2 => val2 }. +#{key1 => val1,key2 => val2} +> maps:get(key1, Map, "Default value"). +val1 +> maps:get(key3, Map, "Default value"). +"Default value"</code> + </desc> + </func> + + <func> + <name name="is_key" arity="2"/> + <fsummary></fsummary> + <desc> + <p> + Returns <c>true</c> if map <c><anno>Map</anno></c> contains <c><anno>Key</anno></c> and returns + <c>false</c> if it does not contain the <c><anno>Key</anno></c>. + The function will fail with an exception if <c><anno>Map</anno></c> is not a Map. + </p> + <p>Example:</p> + <code type="none"> +> Map = #{"42" => value}. +#{"42"> => value} +> maps:is_key("42",Map). +true +> maps:is_key(value,Map). +false</code> + </desc> + </func> + + <func> + <name name="keys" arity="1"/> + <fsummary></fsummary> + <desc> + <p> + Returns a complete list of keys, in arbitrary order, which resides within <c><anno>Map</anno></c>. + </p> + <p>Example:</p> + <code type="none"> +> Map = #{42 => value_three,1337 => "value two","a" => 1}, + maps:keys(Map). +[42,1337,"a"]</code> + </desc> + </func> + + <func> + <name name="map" arity="2"/> + <fsummary></fsummary> + <desc> + <p> + The function produces a new map <c><anno>Map2</anno></c> by calling the function <c>fun F(K, V1)</c> for + every <c><anno>K</anno></c> to value <c><anno>V1</anno></c> association in <c><anno>Map1</anno></c> in arbitrary order. + The function <c>fun F/2</c> must return the value <c><anno>V2</anno></c> to be associated with key <c><anno>K</anno></c> for + the new map <c><anno>Map2</anno></c>. + </p> + <p>Example:</p> + <code type="none"> +> Fun = fun(K,V1) when is_list(K) -> V1*2 end, + Map = #{"k1" => 1, "k2" => 2, "k3" => 3}, + maps:map(Fun,Map). +#{"k1" => 2,"k2" => 4,"k3" => 6}</code> + </desc> + </func> + + <func> + <name name="merge" arity="2"/> + <fsummary></fsummary> + <desc> + <p> + Merges two maps into a single map <c><anno>Map3</anno></c>. If two keys exists in both maps the + value in <c><anno>Map1</anno></c> will be superseded by the value in <c><anno>Map2</anno></c>. + </p> + <p>Example:</p> + <code type="none"> +> Map1 = #{a => "value_one", b => "value_two"}, + Map2 = #{a => 1, c => 2}, + maps:merge(Map1,Map2). +#{a => 1,b => "value_two",c => 2}</code> + </desc> + </func> + + <func> + <name name="new" arity="0"/> + <fsummary></fsummary> + <desc> + <p> + Returns a new empty map. + </p> + <p>Example:</p> + <code type="none"> +> maps:new(). +#{}</code> + </desc> + </func> + + <func> + <name name="put" arity="3"/> + <fsummary></fsummary> + <desc> + <p> + Associates <c><anno>Key</anno></c> with value <c><anno>Value</anno></c> and inserts the association into map <c>Map2</c>. + If key <c><anno>Key</anno></c> already exists in map <c><anno>Map1</anno></c>, the old associated value is + replaced by value <c><anno>Value</anno></c>. The function returns a new map <c><anno>Map2</anno></c> containing the new association and + the old associations in <c><anno>Map1</anno></c>. + </p> + <p>Example:</p> + <code type="none"> +> Map = #{"a" => 1}. +#{"a" => 1} +> maps:put("a", 42, Map). +#{"a" => 42} +> maps:put("b", 1337, Map). +#{"a" => 1,"b" => 1337}</code> + </desc> + </func> + + <func> + <name name="remove" arity="2"/> + <fsummary></fsummary> + <desc> + <p> + The function removes the <c><anno>Key</anno></c>, if it exists, and its associated value from + <c><anno>Map1</anno></c> and returns a new map <c><anno>Map2</anno></c> without key <c><anno>Key</anno></c>. + </p> + <p>Example:</p> + <code type="none"> +> Map = #{"a" => 1}. +#{"a" => 1} +> maps:remove("a",Map). +#{} +> maps:remove("b",Map). +#{"a" => 1}</code> + </desc> + </func> + + <func> + <name name="size" arity="1"/> + <fsummary></fsummary> + <desc> + <p> + The function returns the number of key-value associations in the <c><anno>Map</anno></c>. + This operation happens in constant time. + </p> + <p>Example:</p> + <code type="none"> +> Map = #{42 => value_two,1337 => "value one","a" => 1}, + maps:size(Map). +3</code> + </desc> + </func> + + <func> + <name name="to_list" arity="1"/> + <fsummary></fsummary> + <desc> + <p> + The fuction returns a list of pairs representing the key-value associations of <c><anno>Map</anno></c>, + where the pairs, <c>[{K1,V1}, ..., {Kn,Vn}]</c>, are returned in arbitrary order. + </p> + <p>Example:</p> + <code type="none"> +> Map = #{42 => value_three,1337 => "value two","a" => 1}, + maps:to_list(Map). +[{42,value_three},{1337,"value two"},{"a",1}]</code> + </desc> + </func> + + <func> + <name name="update" arity="3"/> + <fsummary></fsummary> + <desc> + <p> + If <c><anno>Key</anno></c> exists in <c><anno>Map1</anno></c> the old associated value is + replaced by value <c><anno>Value</anno></c>. The function returns a new map <c><anno>Map2</anno></c> containing + the new associated value. If <c><anno>Key</anno></c> does not exist in <c><anno>Map1</anno></c> an exception is + generated. + </p> + <p>Example:</p> + <code type="none"> +> Map = #{"a" => 1}. +#{"a" => 1} +> maps:update("a", 42, Map). +#{"a" => 42}</code> + </desc> + </func> + + <func> + <name name="values" arity="1"/> + <fsummary></fsummary> + <desc> + <p> + Returns a complete list of values, in arbitrary order, contained in map <c>M</c>. + </p> + <p>Example:</p> + <code type="none"> +> Map = #{42 => value_three,1337 => "value two","a" => 1}, + maps:values(Map). +[value_three,"value two",1]</code> + </desc> + </func> + + <func> + <name name="with" arity="2"/> + <fsummary></fsummary> + <desc> + <p> + Returns a new map <c><anno>Map2</anno></c> with the keys <c>K1</c> through <c>Kn</c> and their associated values from map <c><anno>Map1</anno></c>. + Any key in <c><anno>Ks</anno></c> that does not exist in <c><anno>Map1</anno></c> are ignored. + </p> + <p>Example:</p> + <code type="none"> +> Map = #{42 => value_three,1337 => "value two","a" => 1}, + Ks = ["a",42,"other key"], + maps:with(Ks,Map). +#{42 => value_three,"a" => 1}</code> + </desc> + </func> + + <func> + <name name="without" arity="2"/> + <fsummary></fsummary> + <desc> + <p> + Returns a new map <c><anno>Map2</anno></c> without the keys <c>K1</c> through <c>Kn</c> and their associated values from map <c><anno>Map1</anno></c>. + Any key in <c><anno>Ks</anno></c> that does not exist in <c><anno>Map1</anno></c> are ignored. + </p> + <p>Example:</p> + <code type="none"> +> Map = #{42 => value_three,1337 => "value two","a" => 1}, + Ks = ["a",42,"other key"], + maps:without(Ks,Map). +#{1337 => "value two"}</code> + </desc> + </func> + </funcs> +</erlref> diff --git a/lib/stdlib/doc/src/math.xml b/lib/stdlib/doc/src/math.xml index 0219dcce10..43cd20e726 100644 --- a/lib/stdlib/doc/src/math.xml +++ b/lib/stdlib/doc/src/math.xml @@ -1,11 +1,11 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> <year>1996</year> - <year>2012</year> + <year>2013</year> <holder>Ericsson AB, All Rights Reserved</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/ms_transform.xml b/lib/stdlib/doc/src/ms_transform.xml index ad5f8bd5ac..e89dd41f26 100644 --- a/lib/stdlib/doc/src/ms_transform.xml +++ b/lib/stdlib/doc/src/ms_transform.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>2002</year><year>2011</year> + <year>2002</year><year>2013</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/notes.xml b/lib/stdlib/doc/src/notes.xml index e94a4d6a55..8582bfc9f9 100644 --- a/lib/stdlib/doc/src/notes.xml +++ b/lib/stdlib/doc/src/notes.xml @@ -30,6 +30,666 @@ </header> <p>This document describes the changes made to the STDLIB application.</p> +<section><title>STDLIB 2.3</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + The documentation of string:tokens/2 now explicitly + specifies that adjacent separator characters do not give + any empty strings in the resulting list of tokens.</p> + <p> + Own Id: OTP-12036</p> + </item> + <item> + <p> + Fix broken deprecation warnings in ssh application</p> + <p> + Own Id: OTP-12187</p> + </item> + <item> + <p> + Maps: Properly align union typed assoc values in + documentation</p> + <p> + Own Id: OTP-12190</p> + </item> + <item> + <p> + Fix filelib:wildcard/2 when 'Cwd' ends with a dot</p> + <p> + Own Id: OTP-12212</p> + </item> + <item> + <p> + Allow <c>Name/Arity</c> syntax in maps values inside + attributes.</p> + <p> + Own Id: OTP-12213</p> + </item> + <item> + <p> + Fix edlin to correctly save text killed with ctrl-u. + Prior to this fix, entering text into the Erlang shell + and then killing it with ctrl-u followed by yanking it + back with ctrl-y would result in the yanked text being + the reverse of the original killed text.</p> + <p> + Own Id: OTP-12224</p> + </item> + <item> + <p> + If a callback function was terminated with exit/1, there + would be no stack trace in the ERROR REPORT produced by + gen_server. This has been corrected.</p> + <p> + To keep the backwards compatibility, the actual exit + reason for the process is not changed.</p> + <p> + Own Id: OTP-12263 Aux Id: seq12733 </p> + </item> + <item> + <p> + Warnings produced by <c>ms_transform</c> could point out + the wrong line number.</p> + <p> + Own Id: OTP-12264</p> + </item> + </list> + </section> + + + <section><title>Improvements and New Features</title> + <list> + <item> + <p> + Supports tar file creation on other media than file + systems mounted on the local machine.</p> + <p> + The <c>erl_tar</c> api is extended with + <c>erl_tar:init/3</c> that enables usage of user provided + media storage routines. A ssh-specific set of such + routines is hidden in the new function + <c>ssh_sftp:open_tar/3</c> to simplify creating a tar + archive on a remote ssh server.</p> + <p> + A chunked file reading option is added to + <c>erl_tar:add/3,4</c> to save memory on e.g small + embedded systems. The size of the slices read from a file + in that case can be specified.</p> + <p> + Own Id: OTP-12180 Aux Id: seq12715 </p> + </item> + <item> + <p> + I/O requests are optimized for long message queues in the + calling process.</p> + <p> + Own Id: OTP-12315</p> + </item> + </list> + </section> + +</section> + +<section><title>STDLIB 2.2</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + The type spec of the FormFunc argument to + sys:handle_debug/4 was erroneously pointing to dbg_fun(). + This is now corrected and the new type is format_fun().</p> + <p> + Own Id: OTP-11800</p> + </item> + <item> + <p> + Behaviors such as gen_fsm and gen_server should always + invoke format_status/2 before printing the state to the + logs.</p> + <p> + Own Id: OTP-11967</p> + </item> + <item> + <p> The documentation of <c>dets:insert_new/2</c> has + been corrected. (Thanks to Alexei Sholik for reporting + the bug.) </p> + <p> + Own Id: OTP-12024</p> + </item> + <item> + <p> + Printing a term with io_lib:format and control sequence + w, precision P and field width F, where F< P would + fail in one of the two following ways:</p> + <p> + 1) If P < printed length of the term, an infinite loop + would be entered, consuming all available memory.</p> + <p> + 2) If P >= printed length of the term, an exception + would be raised.</p> + <p> + These two problems are now corrected.</p> + <p> + Own Id: OTP-12041</p> + </item> + <item> + <p> + The documentation of <c>maps:values/1</c> has been + corrected.</p> + <p> + Own Id: OTP-12055</p> + </item> + <item> + <p> + Expand shell functions in map expressions.</p> + <p> + Own Id: OTP-12063</p> + </item> + </list> + </section> + + + <section><title>Improvements and New Features</title> + <list> + <item> + <p> + Add maps:with/2</p> + <p> + Own Id: OTP-12137</p> + </item> + </list> + </section> + +</section> + +<section><title>STDLIB 2.1.1</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + OTP-11850 fixed filelib:wildcard/1 to work with broken + symlinks. This correction, however, introduced problems + since symlinks were no longer followed for functions like + filelib:ensure_dir/1, filelib:is_dir/1, + filelib:file_size/1, etc. This is now corrected.</p> + <p> + Own Id: OTP-12054 Aux Id: seq12660 </p> + </item> + </list> + </section> + +</section> + +<section><title>STDLIB 2.1</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p><c>filelib:wildcard("broken_symlink")</c> would return + an empty list if "broken_symlink" was a symlink that did + not point to an existing file.</p> + <p> + Own Id: OTP-11850 Aux Id: seq12571 </p> + </item> + <item> + <p><c>erl_tar</c> can now handle files names that contain + Unicode characters. See "UNICODE SUPPORT" in the + documentation for <c>erl_tar</c>.</p> + <p>When creating a tar file, <c>erl_tar</c> would + sometime write a too short end of tape marker. GNU tar + would correctly extract files from such tar file, but + would complain about "A lone zero block at...".</p> + <p> + Own Id: OTP-11854</p> + </item> + <item> + <p> When redefining and exporting the type <c>map()</c> + the Erlang Code Linter (<c>erl_lint</c>) erroneously + emitted an error. This bug has been fixed. </p> + <p> + Own Id: OTP-11872</p> + </item> + <item> + <p> + Fix evaluation of map updates in the debugger and + erl_eval</p> + <p> + Reported-by: José Valim</p> + <p> + Own Id: OTP-11922</p> + </item> + </list> + </section> + + + <section><title>Improvements and New Features</title> + <list> + <item> + <p>The following native functions now bump an appropriate + amount of reductions and yield when out of + reductions:</p> <list> + <item><c>erlang:binary_to_list/1</c></item> + <item><c>erlang:binary_to_list/3</c></item> + <item><c>erlang:bitstring_to_list/1</c></item> + <item><c>erlang:list_to_binary/1</c></item> + <item><c>erlang:iolist_to_binary/1</c></item> + <item><c>erlang:list_to_bitstring/1</c></item> + <item><c>binary:list_to_bin/1</c></item> </list> + <p>Characteristics impact:</p> <taglist> + <tag>Performance</tag> <item>The functions converting + from lists got a performance loss for very small lists, + and a performance gain for very large lists.</item> + <tag>Priority</tag> <item>Previously a process executing + one of these functions effectively got an unfair priority + boost. This priority boost depended on the input size. + The larger the input was, the larger the priority boost + got. This unfair priority boost is now lost. </item> + </taglist> + <p> + Own Id: OTP-11888</p> + </item> + <item> + <p> + Add <c>maps:get/3</c> to maps module. The function will + return the supplied default value if the key does not + exist in the map.</p> + <p> + Own Id: OTP-11951</p> + </item> + </list> + </section> + +</section> + +<section><title>STDLIB 2.0</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + The option dupnames did not work as intended in re. When + looking for names with {capture, [Name, ...]}, re:run + returned a random instance of the match for that name, + instead of the leftmost matching instance, which was what + the documentation stated. This is now corrected to adhere + to the documentation. The option {capture,all_names} + along with a re:inspect/2 function is also added to + further help in using named subpatterns.</p> + <p> + Own Id: OTP-11205</p> + </item> + <item> + <p> + If option 'binary' was set for standard_input, then c:i() + would hang if the output was more than one page long - + i.e. then input after "(c)ontinue (q)uit -->" could + not be read. This has been corrected. (Thanks to José + Valim)</p> + <p> + Own Id: OTP-11589</p> + </item> + <item> + <p> + stdlib/lists: Add function droplast/1 This functions + drops the last element of a non-empty list. lists:last/1 + and lists:droplast/1 are the dual of hd/1 and tl/1 but + for the end of a list. (Thanks to Hans Svensson)</p> + <p> + Own Id: OTP-11677</p> + </item> + <item> + <p> + Allow all auto imports to be suppressed at once. + Introducing the no_auto_import attribute: + -compile(no_auto_import). Useful for code generation + tools that always use the qualified function names and + want to avoid the auto imported functions clashing with + local ones. (Thanks to José Valim.)</p> + <p> + Own Id: OTP-11682</p> + </item> + <item> + <p> + supervisor_bridge does no longer report normal + termination of children. The reason is that in some + cases, for instance when the restart strategy is + simple_one_for_one, the log could be completely + overloaded with reports about normally terminating + processes. (Thanks to Artem Ocheredko)</p> + <p> + Own Id: OTP-11685</p> + </item> + <item> + <p> The type annotations for alternative registries using + the {via, Module, Name} syntax for sup_name() and + sup_ref() in the supervisor module are now consistent + with the documentation. Dialyzer should no longer + complain about valid supervisor:start_link() and + supervisor:start_child() calls. (Thanks to Caleb + Helbling.) </p> + <p> + Own Id: OTP-11707</p> + </item> + <item> + <p> Two Dets bugs have been fixed. When trying to open a + short file that is not a Dets file, the file was deleted + even with just read access. Calling + <c>dets:is_dets_file/1</c> with a file that is not a Dets + file, a file descriptor was left open. (Thanks to Håkan + Mattsson for reporting the bugs.) </p> + <p> + Own Id: OTP-11709</p> + </item> + <item> + <p> + Fix race bug in <c>ets:all</c>. Concurrent creation of + tables could cause other tables to not be included in the + result. (Thanks to Florian Schintke for bug report)</p> + <p> + Own Id: OTP-11726</p> + </item> + <item> + <p> + erl_eval now properly evaluates '=='/2 when it is used in + guards. (Thanks to José Valim)</p> + <p> + Own Id: OTP-11747</p> + </item> + <item> + <p> + Calls to proplists:get_value/3 are replaced by the faster + lists:keyfind/3 in io_lib_pretty. Elements in the list + are always 2-tuples. (Thanks to Andrew Thompson)</p> + <p> + Own Id: OTP-11752</p> + </item> + <item> + <p> A qlc bug where filters were erroneously optimized + away has been fixed. Thanks to Sam Bobroff for reporting + the bug. </p> + <p> + Own Id: OTP-11758</p> + </item> + <item> + <p> + A number of compiler errors where unusual or nonsensical + code would crash the compiler have been reported by Ulf + Norell and corrected by Anthony Ramine.</p> + <p> + Own Id: OTP-11770</p> + </item> + <item> + <p> Since Erlang/OTP R16B the Erlang Core Linter + (<c>erl_lint</c>) has not emitted errors when built-in + types were re-defined. This bug has been fixed. (Thanks + to Roberto Aloi.) </p> + <p> + Own Id: OTP-11772</p> + </item> + <item> + <p> + The functions <c>sys:get_state/1,2</c> and + <c>sys:replace_state/2,3</c> are fixed so they can now be + run while the process is sys suspended. To accomplish + this, the new callbacks <c>Mod:system_get_state/1</c> and + <c>Mod:system_replace_state/2</c> are added, which are + also implemented by the generic behaviours + <c>gen_server</c>, <c>gen_event</c> and <c>gen_fsm</c>.</p> + <p> + The potential incompatibility refers to</p> + <p> + <list> <item>The previous behaviour of intercepting the + system message and passing a tuple of size 2 as the last + argument to <c>sys:handle_system_msg/6</c> is no longer + supported.</item> <item>The error handling when + <c>StateFun</c> in <c>sys:replace_state/2,3</c> fails is + changed from being totally silent to possibly (if the + callback module does not catch) throw an exception in the + client process.</item> </list></p> + <p> + (Thanks to James Fish and Steve Vinoski)</p> + <p> + *** POTENTIAL INCOMPATIBILITY ***</p> + <p> + Own Id: OTP-11817</p> + </item> + </list> + </section> + + + <section><title>Improvements and New Features</title> + <list> + <item> + <p> + Options to set match_limit and match_limit_recursion are + added to re:run. The option report_errors is also added + to get more information when re:run fails due to limits + or compilation errors.</p> + <p> + Own Id: OTP-10285</p> + </item> + <item> + <p> The pre-defined types <c>array/0</c>, <c>dict/0</c>, + <c>digraph/0</c>, <c>gb_set/0</c>, <c>gb_tree/0</c>, + <c>queue/0</c>, <c>set/0</c>, and <c>tid/0</c> have been + deprecated. They will be removed in Erlang/OTP 18.0. </p> + <p> Instead the types <c>array:array/0</c>, + <c>dict:dict/0</c>, <c>digraph:graph/0</c>, + <c>gb_set:set/0</c>, <c>gb_tree:tree/0</c>, + <c>queue:queue/0</c>, <c>sets:set/0</c>, and + <c>ets:tid/0</c> can be used. (Note: it has always been + necessary to use <c>ets:tid/0</c>.) </p> <p> It is + allowed in Erlang/OTP 17.0 to locally re-define the types + <c>array/0</c>, <c>dict/0</c>, and so on. </p> <p> New + types <c>array:array/1</c>, <c>dict:dict/2</c>, + <c>gb_sets:set/1</c>, <c>gb_trees:tree/2</c>, + <c>queue:queue/1</c>, and <c>sets:set/1</c> have been + added. </p> <p> A compiler option, + <c>nowarn_deprecated_type</c>, has been introduced. By + including the attribute </p> <c> + -compile(nowarn_deprecated_type).</c> <p> in an Erlang + source file, warnings about deprecated types can be + avoided in Erlang/OTP 17.0. </p> <p> The option can also + be given as a compiler flag: </p> <c> erlc + +nowarn_deprecated_type file.erl</c> + <p> + Own Id: OTP-10342</p> + </item> + <item> + <p> + Calls to erlang:open_port/2 with 'spawn' are updated to + handle space in the command path.</p> + <p> + Own Id: OTP-10842</p> + </item> + <item> + <p> Dialyzer's <c>unmatched_return</c> warnings have been + corrected. </p> + <p> + Own Id: OTP-10908</p> + </item> + <item> + <p> + Forbid unsized fields in patterns of binary generators + and simplified v3_core's translation of bit string + generators. (Thanks to Anthony Ramine.)</p> + <p> + Own Id: OTP-11186</p> + </item> + <item> + <p> + The version of the PCRE library Used by Erlang's re + module is raised to 8.33 from 7.6. This means, among + other things, better Unicode and Unicode Character + Properties support. New options connected to PCRE 8.33 + are also added to the re module (ucd, notempty_atstart, + no_start_optimize). PCRE has extended the regular + expression syntax between 7.6 and 8.33, why this imposes + a potential incompatibility. Only very complicated + regular expressions may be affected, but if you know you + are using obscure features, please test run your regular + expressions and verify that their behavior has not + changed.</p> + <p> + *** POTENTIAL INCOMPATIBILITY ***</p> + <p> + Own Id: OTP-11204</p> + </item> + <item> + <p> + Added dict:is_empty/1 and orddict:is_empty/1. (Thanks to + Magnus Henoch.)</p> + <p> + Own Id: OTP-11353</p> + </item> + <item> + <p> + A call to either the <c>garbage_collect/1</c> BIF or the + <c>check_process_code/2</c> BIF may trigger garbage + collection of another processes than the process calling + the BIF. The previous implementations performed these + kinds of garbage collections without considering the + internal state of the process being garbage collected. In + order to be able to more easily and more efficiently + implement yielding native code, these types of garbage + collections have been rewritten. A garbage collection + like this is now triggered by an asynchronous request + signal, the actual garbage collection is performed by the + process being garbage collected itself, and finalized by + a reply signal to the process issuing the request. Using + this approach processes can disable garbage collection + and yield without having to set up the heap in a state + that can be garbage collected.</p> + <p> + The <seealso + marker="erts:erlang#garbage_collect/2"><c>garbage_collect/2</c></seealso>, + and <seealso + marker="erts:erlang#check_process_code/3"><c>check_process_code/3</c></seealso> + BIFs have been introduced. Both taking an option list as + last argument. Using these, one can issue asynchronous + requests.</p> + <p> + <c>code:purge/1</c> and <c>code:soft_purge/1</c> have + been rewritten to utilize asynchronous + <c>check_process_code</c> requests in order to + parallelize work.</p> + <p> + Characteristics impact: A call to the + <c>garbage_collect/1</c> BIF or the + <c>check_process_code/2</c> BIF will normally take longer + time to complete while the system as a whole wont be as + much negatively effected by the operation as before. A + call to <c>code:purge/1</c> and <c>code:soft_purge/1</c> + may complete faster or slower depending on the state of + the system while the system as a whole wont be as much + negatively effected by the operation as before.</p> + <p> + Own Id: OTP-11388 Aux Id: OTP-11535, OTP-11648 </p> + </item> + <item> + <p> Improve the documentation of the supervisor's + <c>via</c> reference. (Thanks to MaximMinin.) </p> + <p> + Own Id: OTP-11399</p> + </item> + <item> + <p><c>orddict:from_list/1</c> now uses the optimized sort + routines in the <c>lists</c> module instead of + (essentially) an insertion sort. Depending on the input + data, the speed of the new <c>from_list/1</c> is anything + from slightly faster up to several orders of magnitude + faster than the old <c>from_list/1</c>.</p> (Thanks to + Steve Vinoski.) + <p> + Own Id: OTP-11552</p> + </item> + <item> + <p> + EEP43: New data type - Maps</p> + <p> + With Maps you may for instance: <taglist> <item><c>M0 = + #{ a => 1, b => 2}, % create + associations</c></item> <item><c>M1 = M0#{ a := 10 }, % + update values</c></item> <item><c>M2 = M1#{ "hi" => + "hello"}, % add new associations</c></item> <item><c>#{ + "hi" := V1, a := V2, b := V3} = M2. % match keys with + values</c></item> </taglist></p> + <p> + For information on how to use Maps please see Map Expressions in the + <seealso marker="doc/reference_manual:expressions#map_expressions"> + Reference Manual</seealso>.</p> + <p> + The current implementation is without the following + features: <taglist> <item>No variable keys</item> + <item>No single value access</item> <item>No map + comprehensions</item> </taglist></p> + <p> + Note that Maps is <em>experimental</em> during OTP 17.0.</p> + <p> + Own Id: OTP-11616</p> + </item> + <item> + <p> + When tab completing the erlang shell now expands + zero-arity functions all the way to closing parenthesis, + unless there is another function with the same name and a + different arity. (Thanks to Pierre Fenoll.)</p> + <p> + Own Id: OTP-11684</p> + </item> + <item> + <p> The Erlang Code Preprocessor (<c>epp</c>) could loop + when encountering a circular macro definition in an + included file. This bug has been fixed. </p> <p> Thanks + to Maruthavanan Subbarayan for reporting the bug, and to + Richard Carlsson for providing a bug fix. </p> + <p> + Own Id: OTP-11728</p> + </item> + <item> + <p> The Erlang Code Linter (<c>erl_lint</c>) has since + Erlang/OTP R13B emitted warnings whenever any of the + types <c>arity()</c>, <c>bitstring()</c>, + <c>iodata()</c>, or <c>boolean()</c> were re-defined. Now + errors are emitted instead. </p> + <p> + *** POTENTIAL INCOMPATIBILITY ***</p> + <p> + Own Id: OTP-11771</p> + </item> + <item> + <p> The <c>encoding</c> option of + <c>erl_parse:abstract/2</c> has been extended to include + <c>none</c> and a callback function (a predicate). </p> + <p> + Own Id: OTP-11807</p> + </item> + <item> + <p> + Export zip option types to allow referal from other + modules.</p> + <p> + Thanks to Pierre Fenoll and Håkan Mattson</p> + <p> + Own Id: OTP-11828</p> + </item> + <item> + <p> + The module <c>pg</c> has been deprecated and will be + removed in Erlang/OTP 18.</p> + <p> + Own Id: OTP-11840</p> + </item> + </list> + </section> + +</section> + <section><title>STDLIB 1.19.4</title> <section><title>Fixed Bugs and Malfunctions</title> @@ -1809,7 +2469,7 @@ platforms than before. If <c>configure</c> warns about no atomic implementation available, try using the <c>libatomic_ops</c> library. Use the <seealso - marker="doc/installation_guide:INSTALL#How-to-Build-and-Install-ErlangOTP_A-Closer-Look-at-the-individual-Steps_Configuring">--with-libatomic_ops=PATH</seealso> + marker="doc/installation_guide:INSTALL#Advanced-configuration-and-build-of-ErlangOTP">--with-libatomic_ops=PATH</seealso> <c>configure</c> command line argument when specifying where the <c>libatomic_ops</c> installation is located. The <c>libatomic_ops</c> library can be downloaded from: @@ -1827,7 +2487,7 @@ the pentium 4 processor. If you want the runtime system to be compatible with older processors (back to 486) you need to pass the <seealso - marker="doc/installation_guide:INSTALL#How-to-Build-and-Install-ErlangOTP_A-Closer-Look-at-the-individual-Steps_Configuring">--enable-ethread-pre-pentium4-compatibility</seealso> + marker="doc/installation_guide:INSTALL#Advanced-configuration-and-build-of-ErlangOTP">--enable-ethread-pre-pentium4-compatibility</seealso> <c>configure</c> command line argument when configuring the system.</p> <p> diff --git a/lib/stdlib/doc/src/notes_history.xml b/lib/stdlib/doc/src/notes_history.xml index 85997f1717..328855f6dd 100644 --- a/lib/stdlib/doc/src/notes_history.xml +++ b/lib/stdlib/doc/src/notes_history.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE chapter SYSTEM "chapter.dtd"> <chapter> <header> <copyright> - <year>2006</year><year>2009</year> + <year>2006</year><year>2013</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/orddict.xml b/lib/stdlib/doc/src/orddict.xml index 319083d35b..6d1702bc59 100644 --- a/lib/stdlib/doc/src/orddict.xml +++ b/lib/stdlib/doc/src/orddict.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>2000</year><year>2011</year> + <year>2000</year><year>2013</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -187,6 +187,13 @@ merge(Fun, D1, D2) -> </desc> </func> <func> + <name name="is_empty" arity="1"/> + <fsummary>Return true if the dictionary is empty</fsummary> + <desc> + <p>Returns <c>true</c> if <c><anno>Orddict</anno></c> has no elements, <c>false</c> otherwise.</p> + </desc> + </func> + <func> <name name="store" arity="3"/> <fsummary>Store a value in a dictionary</fsummary> <desc> diff --git a/lib/stdlib/doc/src/ordsets.xml b/lib/stdlib/doc/src/ordsets.xml index 1e26fc2022..277c1c32ab 100644 --- a/lib/stdlib/doc/src/ordsets.xml +++ b/lib/stdlib/doc/src/ordsets.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>1996</year><year>2011</year> + <year>1996</year><year>2013</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/part.xml b/lib/stdlib/doc/src/part.xml index 25ca56ad86..5589d11e3e 100644 --- a/lib/stdlib/doc/src/part.xml +++ b/lib/stdlib/doc/src/part.xml @@ -1,11 +1,11 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE part SYSTEM "part.dtd"> <part xmlns:xi="http://www.w3.org/2001/XInclude"> <header> <copyright> <year>1996</year> - <year>2009</year> + <year>2013</year> <holder>Ericsson AB, All Rights Reserved</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/part_notes.xml b/lib/stdlib/doc/src/part_notes.xml index 66ad294753..cdd35ac370 100644 --- a/lib/stdlib/doc/src/part_notes.xml +++ b/lib/stdlib/doc/src/part_notes.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE part SYSTEM "part.dtd"> <part xmlns:xi="http://www.w3.org/2001/XInclude"> <header> <copyright> - <year>2004</year><year>2009</year> + <year>2004</year><year>2013</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/part_notes_history.xml b/lib/stdlib/doc/src/part_notes_history.xml index 5e055ee606..15e0a0f1d3 100644 --- a/lib/stdlib/doc/src/part_notes_history.xml +++ b/lib/stdlib/doc/src/part_notes_history.xml @@ -1,11 +1,11 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE part SYSTEM "part.dtd"> <part> <header> <copyright> <year>2006</year> - <year>2011</year> + <year>2013</year> <holder>Ericsson AB, All Rights Reserved</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/pg.xml b/lib/stdlib/doc/src/pg.xml index c56db8c6e6..a3b69884b6 100644 --- a/lib/stdlib/doc/src/pg.xml +++ b/lib/stdlib/doc/src/pg.xml @@ -1,11 +1,11 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> <year>1996</year> - <year>2011</year> + <year>2014</year> <holder>Ericsson AB, All Rights Reserved</holder> </copyright> <legalnotice> @@ -32,6 +32,9 @@ <module>pg</module> <modulesummary>Distributed, Named Process Groups</modulesummary> <description> + <warning> + <p>This module is deprecated and will be removed in Erlang/OTP 18.</p> + </warning> <p>This (experimental) module implements process groups. A process group is a group of processes that can be accessed by a common name. For example, a group named <c>foobar</c> can include a set diff --git a/lib/stdlib/doc/src/pool.xml b/lib/stdlib/doc/src/pool.xml index 39a79e5dc5..1b903984f9 100644 --- a/lib/stdlib/doc/src/pool.xml +++ b/lib/stdlib/doc/src/pool.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>1996</year><year>2011</year> + <year>1996</year><year>2013</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/proc_lib.xml b/lib/stdlib/doc/src/proc_lib.xml index b597074044..5bf5744622 100644 --- a/lib/stdlib/doc/src/proc_lib.xml +++ b/lib/stdlib/doc/src/proc_lib.xml @@ -1,4 +1,4 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> diff --git a/lib/stdlib/doc/src/proplists.xml b/lib/stdlib/doc/src/proplists.xml index a0063a58d3..1655133b2b 100644 --- a/lib/stdlib/doc/src/proplists.xml +++ b/lib/stdlib/doc/src/proplists.xml @@ -1,4 +1,4 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> diff --git a/lib/stdlib/doc/src/qlc.xml b/lib/stdlib/doc/src/qlc.xml index ce50631ca9..8682936c08 100644 --- a/lib/stdlib/doc/src/qlc.xml +++ b/lib/stdlib/doc/src/qlc.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>2004</year><year>2011</year> + <year>2004</year><year>2013</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/queue.xml b/lib/stdlib/doc/src/queue.xml index 383f52d10d..9c994154d4 100644 --- a/lib/stdlib/doc/src/queue.xml +++ b/lib/stdlib/doc/src/queue.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>1996</year><year>2011</year> + <year>1996</year><year>2014</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -90,9 +90,15 @@ <datatypes> <datatype> - <name><marker id="type-queue">queue()</marker></name> + <name name="queue" n_vars="1"/> <desc><p>As returned by <c>new/0</c>.</p></desc> </datatype> + <datatype> + <name name="queue" n_vars="0"/> + <desc> + <p><c>queue()</c> is equivalent to <c>queue(term())</c>.</p> + </desc> + </datatype> </datatypes> <funcs> diff --git a/lib/stdlib/doc/src/random.xml b/lib/stdlib/doc/src/random.xml index 1b8fa44883..e001058e19 100644 --- a/lib/stdlib/doc/src/random.xml +++ b/lib/stdlib/doc/src/random.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>1996</year><year>2011</year> + <year>1996</year><year>2013</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/re.xml b/lib/stdlib/doc/src/re.xml index 7a9f37ca90..a1833f6a51 100644 --- a/lib/stdlib/doc/src/re.xml +++ b/lib/stdlib/doc/src/re.xml @@ -1,11 +1,11 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> <year>2007</year> - <year>2012</year> + <year>2013</year> <holder>Ericsson AB, All Rights Reserved</holder> </copyright> <legalnotice> @@ -101,7 +101,7 @@ <p><marker id="compile_options"/>The options have the following meanings:</p> <taglist> <tag><c>unicode</c></tag> - <item>The regular expression is given as a Unicode <c>charlist()</c> and the resulting regular expression code is to be run against a valid Unicode <c>charlist()</c> subject.</item> + <item>The regular expression is given as a Unicode <c>charlist()</c> and the resulting regular expression code is to be run against a valid Unicode <c>charlist()</c> subject. Also consider the <c>ucp</c> option when using Unicode characters.</item> <tag><c>anchored</c></tag> <item>The pattern is forced to be "anchored", that is, it is constrained to match only at the first matching point in the string that is being searched (the "subject string"). This effect can also be achieved by appropriate constructs in the pattern itself.</item> <tag><c>caseless</c></tag> @@ -147,11 +147,51 @@ This option makes it possible to include comments inside complicated patterns. N <item>Specifies specifically that \R is to match only the cr, lf or crlf sequences, not the Unicode specific newline characters.</item> <tag><c>bsr_unicode</c></tag> <item>Specifies specifically that \R is to match all the Unicode newline characters (including crlf etc, the default).</item> + <tag><c>no_start_optimize</c></tag> + <item>This option disables optimization that may malfunction if "Special start-of-pattern items" are present in the regular expression. A typical example would be when matching "DEFABC" against "(*COMMIT)ABC", where the start optimization of PCRE would skip the subject up to the "A" and would never realize that the (*COMMIT) instruction should have made the matching fail. This option is only relevant if you use "start-of-pattern items", as discussed in the section "PCRE regular expression details" below.</item> + <tag><c>ucp</c></tag> + <item>Specifies that Unicode Character Properties should be used when resolving \B, \b, \D, \d, \S, \s, \Wand \w. Without this flag, only ISO-Latin-1 properties are used. Using Unicode properties hurts performance, but is semantically correct when working with Unicode characters beyond the ISO-Latin-1 range.</item> + <tag><c>never_utf</c></tag> + <item>Specifies that the (*UTF) and/or (*UTF8) "start-of-pattern items" are forbidden. This flag can not be combined with <c>unicode</c>. Useful if ISO-Latin-1 patterns from an external source are to be compiled.</item> </taglist> </desc> </func> <func> + <name name="inspect" arity="2"/> + <fsummary>Inspects a compiled regular expression</fsummary> + <desc> + <p>This function takes a compiled regular expression and an item, returning the relevant data from the regular expression. Currently the only supported item is <c>namelist</c>, which returns the tuple <c>{namelist, [ binary()]}</c>, containing the names of all (unique) named subpatterns in the regular expression.</p> + <p>Example:</p> + <code type="none"> +1> {ok,MP} = re:compile("(?<A>A)|(?<B>B)|(?<C>C)"). +{ok,{re_pattern,3,0,0, + <<69,82,67,80,119,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255, + 255,255,...>>}} +2> re:inspect(MP,namelist). +{namelist,[<<"A">>,<<"B">>,<<"C">>]} +3> {ok,MPD} = re:compile("(?<C>A)|(?<B>B)|(?<C>C)",[dupnames]). +{ok,{re_pattern,3,0,0, + <<69,82,67,80,119,0,0,0,0,0,8,0,1,0,0,0,255,255,255,255, + 255,255,...>>}} +4> re:inspect(MPD,namelist). +{namelist,[<<"B">>,<<"C">>]}</code> + <p>Note specifically in the second example that the duplicate name only occurs once in the returned list, and that the list is in alphabetical order regardless of where the names are positioned in the regular expression. The order of the names is the same as the order of captured subexpressions if <c>{capture, all_names}</c> is given as an option to <c>re:run/3</c>. You can therefore create a name-to-value mapping from the result of <c>re:run/3</c> like this:</p> +<code> +1> {ok,MP} = re:compile("(?<A>A)|(?<B>B)|(?<C>C)"). +{ok,{re_pattern,3,0,0, + <<69,82,67,80,119,0,0,0,0,0,0,0,1,0,0,0,255,255,255,255, + 255,255,...>>}} +2> {namelist, N} = re:inspect(MP,namelist). +{namelist,[<<"A">>,<<"B">>,<<"C">>]} +3> {match,L} = re:run("AA",MP,[{capture,all_names,binary}]). +{match,[<<"A">>,<<>>,<<>>]} +4> NameMap = lists:zip(N,L). +[{<<"A">>,<<"A">>},{<<"B">>,<<>>},{<<"C">>,<<>>}]</code> + <p>More items are expected to be added in the future.</p> + </desc> + </func> + <func> <name name="run" arity="2"/> <fsummary>Match a subject against regular expression and capture subpatterns</fsummary> <desc> @@ -178,13 +218,18 @@ This option makes it possible to include comments inside complicated patterns. N <p>If the regular expression is previously compiled, the option list can only contain the options <c>anchored</c>, - <c>global</c>, <c>notbol</c>, <c>noteol</c>, - <c>notempty</c>, <c>{offset, integer() >= 0}</c>, <c>{newline, - <anno>NLSpec</anno>}</c> and <c>{capture, <anno>ValueSpec</anno>}/{capture, <anno>ValueSpec</anno>, + <c>global</c>, <c>notbol</c>, <c>noteol</c>, <c>report_errors</c>, + <c>notempty</c>, <c>notempty_atstart</c>, <c>{offset, integer() >= 0}</c>, + <c>{match_limit, integer() >= 0}</c>, + <c>{match_limit_recursion, integer() >= 0}</c>, + <c>{newline, + <anno>NLSpec</anno>}</c> and + <c>{capture, <anno>ValueSpec</anno>}/{capture, <anno>ValueSpec</anno>, <anno>Type</anno>}</c>. Otherwise all options valid for the <c>re:compile/2</c> function are allowed as well. Options allowed both for compilation and execution of a match, namely - <c>anchored</c> and <c>{newline, <anno>NLSpec</anno>}</c>, will affect both + <c>anchored</c> and <c>{newline, <anno>NLSpec</anno>}</c>, + will affect both the compilation and execution if present together with a non pre-compiled regular expression.</p> @@ -214,6 +259,17 @@ This option makes it possible to include comments inside complicated patterns. N be done either by specifying <c>none</c> or an empty list as <c><anno>ValueSpec</anno></c>.</p> + <p>The <c>report_errors</c> option adds the possibility that an + error tuple is returned. The tuple will either indicate a + matching error (<c>match_limit</c> or + <c>match_limit_recursion</c>) or a compilation error, where the + error tuple has the format <c>{error, {compile, + <anno>CompileErr</anno>}}</c>. Note that if the option + <c>report_errors</c> is not given, the function never returns + error tuples, but will report compilation errors as a badarg + exception and failed matches due to exceeded match limits simply + as <c>nomatch</c>.</p> + <p>The options relevant for execution are:</p> <taglist> @@ -241,7 +297,7 @@ This option makes it possible to include comments inside complicated patterns. N When the global option is given, <c>re:run/3</c> handles empty matches in the same way as Perl: a zero-length match at any point will be retried with the options <c>[anchored, - notempty]</c> as well. If that search gives a result of length + notempty_atstart]</c> as well. If that search gives a result of length > 0, the result is included. For example:</p> <code> re:run("cat","(|at)",[global]).</code> @@ -254,9 +310,9 @@ This option makes it possible to include comments inside complicated patterns. N <c>[{0,0},{0,0}]</c> (the second <c>{0,0}</c> is due to the subexpression marked by the parentheses). As the length of the match is 0, we don't advance to the next position yet.</item> - <tag>At offset <c>0</c> with <c>[anchored, notempty]</c></tag> + <tag>At offset <c>0</c> with <c>[anchored, notempty_atstart]</c></tag> <item> The search is retried - with the options <c>[anchored, notempty]</c> at the same + with the options <c>[anchored, notempty_atstart]</c> at the same position, which does not give any interesting result of longer length, so the search position is now advanced to the next character (<c>a</c>).</item> @@ -264,7 +320,7 @@ This option makes it possible to include comments inside complicated patterns. N <item>This time, the search results in <c>[{1,0},{1,0}]</c>, so this search will also be repeated with the extra options.</item> - <tag>At offset <c>1</c> with <c>[anchored, notempty]</c></tag> + <tag>At offset <c>1</c> with <c>[anchored, notempty_atstart]</c></tag> <item>Now the <c>ab</c> alternative is found and the result will be [{1,2},{1,2}]. The result is added to the list of results and the position in the @@ -272,7 +328,7 @@ This option makes it possible to include comments inside complicated patterns. N <tag>At offset <c>3</c></tag> <item>The search now once again matches the empty string, giving <c>[{3,0},{3,0}]</c>.</item> - <tag>At offset <c>1</c> with <c>[anchored, notempty]</c></tag> + <tag>At offset <c>1</c> with <c>[anchored, notempty_atstart]</c></tag> <item>This will give no result of length > 0 and we are at the last position, so the global search is complete.</item> </taglist> @@ -293,15 +349,21 @@ This option makes it possible to include comments inside complicated patterns. N subject. With the <c>notempty</c> option, this match is not valid, so re:run/3 searches further into the string for occurrences of "a" or "b".</p> - - <p>Perl has no direct equivalent of <c>notempty</c>, but it does - make a special case of a pattern match of the empty string - within its split() function, and when using the /g modifier. It - is possible to emulate Perl's behavior after matching a null - string by first trying the match again at the same offset with - <c>notempty</c> and <c>anchored</c>, and then, if that fails, by - advancing the starting offset (see below) and trying an ordinary - match again.</p> + </item> + <tag><c>notempty_atstart</c></tag> + <item> + <p>This is like <c>notempty</c>, except that an empty string + match that is not at the start of the subject is permitted. If + the pattern is anchored, such a match can occur only if the + pattern contains \K.</p> + <p>Perl has no direct equivalent of <c>notempty</c> or <c>notempty_atstart</c>, but it does + make a special case of a pattern match of the empty string + within its split() function, and when using the /g modifier. It + is possible to emulate Perl's behavior after matching a null + string by first trying the match again at the same offset with + <c>notempty_atstart</c> and <c>anchored</c>, and then, if that fails, by + advancing the starting offset (see below) and trying an ordinary + match again.</p> </item> <tag><c>notbol</c></tag> @@ -322,6 +384,116 @@ This option makes it possible to include comments inside complicated patterns. N behavior of the dollar metacharacter. It does not affect \Z or \z.</item> + <tag><c>report_errors</c></tag> + + <item><p>This option gives better control of the error handling in <c>re:run/3</c>. When it is given, compilation errors (if the regular expression isn't already compiled) as well as run-time errors are explicitly returned as an error tuple.</p> + <p>The possible run-time errors are:</p> + <taglist> + <tag><c>match_limit</c></tag> + + <item>The PCRE library sets a limit on how many times the + internal match function can be called. The default value for + this is 10000000 in the library compiled for Erlang. If + <c>{error, match_limit}</c> is returned, it means that the + execution of the regular expression has reached this + limit. Normally this is to be regarded as a <c>nomatch</c>, + which is the default return value when this happens, but by + specifying <c>report_errors</c>, you will get informed when + the match fails due to to many internal calls.</item> + + <tag><c>match_limit_recursion</c></tag> + + <item>This error is very similar to <c>match_limit</c>, but + occurs when the internal match function of PCRE is + "recursively" called more times than the + "match_limit_recursion" limit, which is by default 10000000 as + well. Note that as long as the <c>match_limit</c> and + <c>match_limit_default</c> values are kept at the default + values, the <c>match_limit_recursion</c> error can not occur, + as the <c>match_limit</c> error will occur before that (each + recursive call is also a call, but not vice versa). Both + limits can however be changed, either by setting limits + directly in the regular expression string (see reference + section below) or by giving options to <c>re:run/3</c></item> + + </taglist> + <p>It is important to understand that what is referred to as + "recursion" when limiting matches is not actually recursion on + the C stack of the Erlang machine, neither is it recursion on + the Erlang process stack. The version of PCRE compiled into the + Erlang VM uses machine "heap" memory to store values that needs to be + kept over recursion in regular expression matches.</p> + </item> + <tag><c>{match_limit, integer() >= 0}</c></tag> + + <item><p>This option limits the execution time of a match in an + implementation-specific way. It is described in the following + way by the PCRE documentation:</p> + + <code> +The match_limit field provides a means of preventing PCRE from using +up a vast amount of resources when running patterns that are not going +to match, but which have a very large number of possibilities in their +search trees. The classic example is a pattern that uses nested +unlimited repeats. + +Internally, pcre_exec() uses a function called match(), which it calls +repeatedly (sometimes recursively). The limit set by match_limit is +imposed on the number of times this function is called during a match, +which has the effect of limiting the amount of backtracking that can +take place. For patterns that are not anchored, the count restarts +from zero for each position in the subject string.</code> + + <p>This means that runaway regular expression matches can fail + faster if the limit is lowered using this option. The default + value compiled into the Erlang virtual machine is 10000000</p> + + <note><p>This option does in no way affect the execution of the + Erlang virtual machine in terms of "long running + BIF's". <c>re:run</c> always give control back to the scheduler + of Erlang processes at intervals that ensures the real time + properties of the Erlang system.</p></note> + </item> + + <tag><c>{match_limit_recursion, integer() >= 0}</c></tag> + + <item><p>This option limits the execution time and memory + consumption of a match in an implementation-specific way, very + similar to <c>match_limit</c>. It is described in the following + way by the PCRE documentation:</p> + + <code> +The match_limit_recursion field is similar to match_limit, but instead +of limiting the total number of times that match() is called, it +limits the depth of recursion. The recursion depth is a smaller number +than the total number of calls, because not all calls to match() are +recursive. This limit is of use only if it is set smaller than +match_limit. + +Limiting the recursion depth limits the amount of machine stack that +can be used, or, when PCRE has been compiled to use memory on the heap +instead of the stack, the amount of heap memory that can be +used.</code> + + <p>The Erlang virtual machine uses a PCRE library where heap + memory is used when regular expression match recursion happens, + why this limits the usage of machine heap, not C stack.</p> + + <p>Specifying a lower value may result in matches with deep recursion failing, when they should actually have matched:</p> + <code type="none"> +1> re:run("aaaaaaaaaaaaaz","(a+)*z"). +{match,[{0,14},{0,13}]} +2> re:run("aaaaaaaaaaaaaz","(a+)*z",[{match_limit_recursion,5}]). +nomatch +3> re:run("aaaaaaaaaaaaaz","(a+)*z",[{match_limit_recursion,5},report_errors]). +{error,match_limit_recursion}</code> + + <p>This option, as well as the <c>match_limit</c> option should + only be used in very rare cases. Understanding of the PCRE + library internals is recommended before tampering with these + limits.</p> + </item> + <tag><c>{offset, integer() >= 0}</c></tag> <item>Start matching at the offset (position) given in the @@ -394,6 +566,9 @@ This option makes it possible to include comments inside complicated patterns. N <taglist> <tag><c>all</c></tag> <item>All captured subpatterns including the complete matching string. This is the default.</item> + <tag><c>all_names</c></tag> + <item>All <em>named</em> subpatterns in the regular expression, as if a <c>list()</c> + of all the names <em>in alphabetical order</em> was given. The list of all names can also be retrieved with the <seealso marker="#inspect/2">inspect/2</seealso> function.</item> <tag><c>first</c></tag> <item>Only the first captured subpattern, which is always the complete matching part of the subject. All explicitly captured subpatterns are discarded.</item> <tag><c>all_but_first</c></tag> @@ -721,12 +896,12 @@ published by O'Reilly, covers regular expressions in great detail. This description of PCRE's regular expressions is intended as reference material.</p> <p>The reference material is divided into the following sections:</p> <list> -<item><seealso marker="#sect1">Newline conventions</seealso></item> +<item><seealso marker="#sect1">Special start-of-pattern items</seealso></item> <item><seealso marker="#sect2">Characters and metacharacters</seealso></item> <item><seealso marker="#sect3">Backslash</seealso></item> <item><seealso marker="#sect4">Circumflex and dollar</seealso></item> -<item><seealso marker="#sect5">Full stop (period, dot)</seealso></item> -<item><seealso marker="#sect6">Matching a single byte</seealso></item> +<item><seealso marker="#sect5">Full stop (period, dot) and \N</seealso></item> +<item><seealso marker="#sect6">Matching a single data unit</seealso></item> <item><seealso marker="#sect7">Square brackets and character classes</seealso></item> <item><seealso marker="#sect8">POSIX character classes</seealso></item> <item><seealso marker="#sect9">Vertical bar</seealso></item> @@ -742,6 +917,7 @@ description of PCRE's regular expressions is intended as reference material.</p> <item><seealso marker="#sect19">Comments</seealso></item> <item><seealso marker="#sect20">Recursive patterns</seealso></item> <item><seealso marker="#sect21">Subpatterns as subroutines</seealso></item> +<item><seealso marker="#sect22">Oniguruma subroutine syntax</seealso></item> <!-- XXX C Interface <item><seealso marker="#sect22">Callouts</seealso></item> --> @@ -751,7 +927,55 @@ description of PCRE's regular expressions is intended as reference material.</p> </section> -<section><marker id="sect1"></marker><title>Newline conventions</title> +<section><marker id="sect1"></marker><title>Special start-of-pattern items</title> + +<p>A number of options that can be passed to <c>re:compile/2</c> can also be set +by special items at the start of a pattern. These are not Perl-compatible, but +are provided to make these options accessible to pattern writers who are not +able to change the program that processes the pattern. Any number of these +items may appear, but they must all be together right at the start of the +pattern string, and the letters must be in upper case.</p> + +<p><em>UTF support</em></p> +<p> +Unicode support is basically UTF-8 based. To use Unicode characters, you either +call <c>re:compile/2</c>/<c>re:run/3</c> with the <c>unicode</c> option, or the + pattern must start with one of these special sequences:</p> +<quote> +<p> (*UTF8)</p> +<p> (*UTF)</p> +</quote> + +<p>Both options give the same effect, the input string is interpreted +as UTF-8. Note that with these instructions, the automatic conversion +of lists to UTF-8 is not performed by the <c>re</c> functions, why +using these options is not recommended. Add the <c>unicode</c> option +when running <c>re:compile/2</c> instead.</p> + +<p> +Some applications that allow their users to supply patterns may wish to +restrict them to non-UTF data for security reasons. If the <c>never_utf</c> +option is set at compile time, (*UTF) etc. are not allowed, and their +appearance causes an error. +</p> + +<p><em>Unicode property support</em></p> +<p>Another special sequence that may appear at the start of a pattern is</p> +<quote> +<p> (*UCP)</p> +</quote> +<p>This has the same effect as setting the <c>ucp</c> option: it causes sequences +such as \d and \w to use Unicode properties to determine character types, +instead of recognizing only characters with codes less than 128 via a lookup +table. +</p> + +<p><em>Disabling start-up optimizations</em></p> +<p> +If a pattern starts with (*NO_START_OPT), it has the same effect as setting the +<c>no_Start_optimize</c> option at compile time.</p> + +<p><em>Newline conventions</em></p> <p>PCRE supports five @@ -780,23 +1004,37 @@ example, the pattern:</p> </quote> <p>changes the convention to CR. That pattern matches "a\nb" because LF is no -longer a newline. Note that these special settings, which are not -Perl-compatible, are recognized only at the very start of a pattern, and that -they must be in upper case. If more than one of them is present, the last one +longer a newline. If more than one of them is present, the last one is used.</p> -<p>The newline convention does not affect what the \R escape sequence matches. By -default, this is any Unicode newline sequence, for Perl compatibility. However, -this can be changed; see the description of \R in the section entitled +<p>The newline convention affects where the circumflex and dollar assertions are +true. It also affects the interpretation of the dot metacharacter when +<c>dotall</c> is not set, and the behaviour of \N. However, it does not affect +what the \R escape sequence matches. By default, this is any Unicode newline +sequence, for Perl compatibility. However, this can be changed; see the +description of \R in the section entitled -"Newline sequences" +<em>"Newline sequences"</em> below. A change of \R setting can be combined with a change of newline convention.</p> +<p><em>Setting match and recursion limits</em></p> + +<p>The caller of <c>re:run/3</c> can set a limit on the number of times the internal match() function is called and on the maximum depth of recursive calls. These facilities are provided to catch runaway matches that are provoked by patterns with huge matching trees (a typical example is a pattern with nested unlimited repeats) and to avoid running out of system stack by too much recursion. When one of these limits is reached, pcre_exec() gives an error return. The limits can also be set by items at the start of the pattern of the form</p> +<quote> +<p> (*LIMIT_MATCH=d)</p> +<p> (*LIMIT_RECURSION=d)</p> +</quote> +<p>where d is any number of decimal digits. However, the value of the setting must be less than the value set by the caller of <c>re:run/3</c> for it to have any effect. In other words, the pattern writer can lower the limit set by the programmer, but not raise it. If there is more than one setting of one of these limits, the lower value is used.</p> + +<p>The current default value for both the limits are 10000000 in the Erlang +VM. Note that the recursion limit does not actually affect the stack +depth of the VM, as PCRE for Erlang is compiled in such a way that the +match function never does recursion on the "C-stack".</p> + </section> - <section><marker id="sect2"></marker><title>Characters and metacharacters</title> <!-- .rs --> @@ -862,7 +1100,7 @@ a character class the only metacharacters are:</p> <p>The backslash character has several uses. Firstly, if it is followed by a -non-alphanumeric character, it takes away any special meaning that character +character that is not a number or a letter, it takes away any special meaning that character may have. This use of backslash as an escape character applies both inside and outside character classes.</p> @@ -872,10 +1110,14 @@ otherwise be interpreted as a metacharacter, so it is always safe to precede a non-alphanumeric with backslash to specify that it stands for itself. In particular, if you want to match a backslash, you write \\.</p> -<p>If a pattern is compiled with the <c>extended</c> option, whitespace in the +<p>In <c>unicode</c> mode, only ASCII numbers and letters have any special meaning after a +backslash. All other characters (in particular, those whose codepoints are +greater than 127) are treated as literals.</p> + +<p>If a pattern is compiled with the <c>extended</c> option, white space in the pattern (other than in a character class) and characters between a # outside a character class and the next newline are ignored. An escaping backslash can -be used to include a whitespace or # character as part of the pattern.</p> +be used to include a white space or # character as part of the pattern.</p> <p>If you want to remove the special meaning from a sequence of characters, you can do so by putting them between \Q and \E. This is different from Perl in @@ -889,42 +1131,54 @@ Perl, $ and @ cause variable interpolation. Note the following examples:</p> \Qabc\E\$\Qxyz\E abc$xyz abc$xyz</code> -<p>The \Q...\E sequence is recognized both inside and outside character classes.</p> - +<p>The \Q...\E sequence is recognized both inside and outside +character classes. An isolated \E that is not preceded by \Q is +ignored. If \Q is not followed by \E later in the pattern, the literal +interpretation continues to the end of the pattern (that is, \E is +assumed at the end). If the isolated \Q is inside a character class, +this causes an error, because the character class is not +terminated.</p> <p><em>Non-printing characters</em></p> <p>A second use of backslash provides a way of encoding non-printing characters in patterns in a visible manner. There is no restriction on the appearance of non-printing characters, apart from the binary zero that terminates a pattern, -but when a pattern is being prepared by text editing, it is usually easier to -use one of the following escape sequences than the binary character it -represents:</p> +but when a pattern is being prepared by text editing, it is often easier to use +one of the following escape sequences than the binary character it represents:</p> <taglist> <tag>\a</tag> <item>alarm, that is, the BEL character (hex 07)</item> - <tag>\cx</tag> <item>"control-x", where x is any character</item> + <tag>\cx</tag> <item>"control-x", where x is any ASCII character</item> <tag>\e </tag> <item>escape (hex 1B)</item> - <tag>\f</tag> <item>formfeed (hex 0C)</item> + <tag>\f</tag> <item>form feed (hex 0C)</item> <tag>\n</tag> <item>linefeed (hex 0A)</item> <tag>\r</tag> <item>carriage return (hex 0D)</item> <tag>\t </tag> <item>tab (hex 09)</item> - <tag>\ddd</tag> <item>character with octal code ddd, or backreference</item> + <tag>\ddd</tag> <item>character with octal code ddd, or back reference</item> <tag>\xhh </tag> <item>character with hex code hh</item> <tag>\x{hhh..}</tag> <item>character with hex code hhh..</item> </taglist> -<p>The precise effect of \cx is as follows: if x is a lower case letter, it -is converted to upper case. Then bit 6 of the character (hex 40) is inverted. -Thus \cz becomes hex 1A, but \c{ becomes hex 3B, while \c; becomes hex -7B.</p> +<p>The precise effect of \cx on ASCII characters is as follows: if x is a lower +case letter, it is converted to upper case. Then bit 6 of the character (hex +40) is inverted. Thus \cA to \cZ become hex 01 to hex 1A (A is 41, Z is 5A), +but \c{ becomes hex 3B ({ is 7B), and \c; becomes hex 7B (; is 3B). If the +data item (byte or 16-bit value) following \c has a value greater than 127, a +compile-time error occurs. This locks out non-ASCII characters in all modes.</p> -<p>After \x, from zero to two hexadecimal digits are read (letters can be in -upper or lower case). Any number of hexadecimal digits may appear between \x{ -and }, but the value of the character code must be less than 256 in non-UTF-8 -mode, and less than 2**31 in UTF-8 mode. That is, the maximum value in -hexadecimal is 7FFFFFFF. Note that this is bigger than the largest Unicode code -point, which is 10FFFF.</p> +<p>The \c facility was designed for use with ASCII characters, but with the +extension to Unicode it is even less useful than it once was.</p> + +<p>By default, after \x, from zero to two hexadecimal digits are read (letters +can be in upper or lower case). Any number of hexadecimal digits may appear +between \x{ and }, but the character code is constrained as follows:</p> +<taglist> + <tag>8-bit non-Unicode mode</tag> <item>less than 0x100</item> + <tag>8-bit UTF-8 mode</tag> <item>less than 0x10ffff and a valid codepoint</item> +</taglist> +<p>Invalid Unicode codepoints are the range 0xd800 to 0xdfff (the so-called +"surrogate" codepoints), and 0xffef.</p> <p>If characters other than hexadecimal digits appear between \x{ and }, or if there is no terminating }, this form of escape is not recognized. Instead, the @@ -952,17 +1206,12 @@ later, following the discussion of parenthesized subpatterns.</p> <p>Inside a character class, or if the decimal number is greater than 9 and there have not been that many capturing subpatterns, PCRE re-reads up to three octal digits following the backslash, and uses them to generate a data character. Any -subsequent digits stand for themselves. -The value of a -character specified in octal must be less than \400. -In non-UTF-8 mode, the value of a -character specified in octal must be less than \400. In UTF-8 mode, values up -to \777 are permitted. - +subsequent digits stand for themselves. The value of the character is +constrained in the same way as characters specified in hexadecimal. For example:</p> <taglist> - <tag>\040</tag> <item>is another way of writing a space</item> + <tag>\040</tag> <item>is another way of writing a ASCII space</item> <tag>\40</tag> <item>is the same, provided there are fewer than 40 previous capturing subpatterns</item> @@ -977,7 +1226,7 @@ For example:</p> character with octal code 113</item> <tag>\377</tag> <item>might be a back reference, otherwise - the byte consisting entirely of 1 bits</item> + the value 255 (decimal)</item> <tag>\81</tag> <item>is either a back reference, or a binary zero followed by the two characters "8" and "1"</item> @@ -987,12 +1236,19 @@ For example:</p> a leading zero, because no more than three octal digits are ever read.</p> -<p>All the sequences that define a single character value can be used -both inside and outside character classes. In addition, inside a -character class, the sequence \b is interpreted as the backspace -character (hex 08), and the sequences \R and \X are interpreted as -the characters "R" and "X", respectively. Outside a character class, -these sequences have different meanings (see below).</p> +<p>All the sequences that define a single character value can be used both inside +and outside character classes. In addition, inside a character class, \b is +interpreted as the backspace character (hex 08).</p> +<p>\N is not allowed in a character class. \B, \R, and \X are not special +inside a character class. Like other unrecognized escape sequences, they are +treated as the literal characters "B", "R", and "X". Outside a character class, these +sequences have different meanings.</p> + +<p><em>Unsupported escape sequences</em></p> + +<p>In Perl, the sequences \l, \L, \u, and \U are recognized by its string +handler and used to modify the case of following characters. PCRE +does not support these escape sequences.</p> <p><em>Absolute and relative back references</em></p> @@ -1002,30 +1258,42 @@ reference. A named back reference can be coded as \g{name}. Back references are discussed later, following the discussion of parenthesized subpatterns.</p> +<p><em>Absolute and relative subroutine calls</em></p> +<p>For compatibility with Oniguruma, the non-Perl syntax \g followed by a name or +a number enclosed either in angle brackets or single quotes, is an alternative +syntax for referencing a subpattern as a "subroutine". Details are discussed +later. +Note that \g{...} (Perl syntax) and \g<...> (Oniguruma syntax) are <em>not</em> +synonymous. The former is a back reference; the latter is a +subroutine call.</p> + <p><em>Generic character types</em></p> -<p>Another use of backslash is for specifying generic character types. The -following are always recognized:</p> +<p>Another use of backslash is for specifying generic character types:</p> <taglist> <tag>\d</tag> <item>any decimal digit</item> <tag>\D</tag> <item>any character that is not a decimal digit</item> - <tag>\h</tag> <item>any horizontal whitespace character</item> - <tag>\H</tag> <item>any character that is not a horizontal whitespace character</item> - <tag>\s</tag> <item>any whitespace character</item> - <tag>\S</tag> <item>any character that is not a whitespace character</item> - <tag>\v</tag> <item>any vertical whitespace character</item> - <tag>\V</tag> <item>any character that is not a vertical whitespace character</item> + <tag>\h</tag> <item>any horizontal white space character</item> + <tag>\H</tag> <item>any character that is not a horizontal white space character</item> + <tag>\s</tag> <item>any white space character</item> + <tag>\S</tag> <item>any character that is not a white space character</item> + <tag>\v</tag> <item>any vertical white space character</item> + <tag>\V</tag> <item>any character that is not a vertical white space character</item> <tag>\w</tag> <item>any "word" character</item> <tag>\W</tag> <item>any "non-word" character</item> </taglist> -<p>Each pair of escape sequences partitions the complete set of characters into -two disjoint sets. Any given character matches one, and only one, of each pair.</p> +<p>There is also the single sequence \N, which matches a non-newline character. +This is the same as the "." metacharacter +when <c>dotall</c> is not set. Perl also uses \N to match characters by name; +PCRE does not support this.</p> -<p>These character type sequences can appear both inside and outside character +<p>Each pair of lower and upper case escape sequences partitions the complete set +of characters into two disjoint sets. Any given character matches one, and only +one, of each pair. The sequences can appear both inside and outside character classes. They each match one character of the appropriate type. If the current -matching point is at the end of the subject string, all of them fail, since +matching point is at the end of the subject string, all of them fail, because there is no character to match.</p> <p>For compatibility with Perl, \s does not match the VT character (code 11). @@ -1034,18 +1302,34 @@ are HT (9), LF (10), FF (12), CR (13), and space (32). If "use locale;" is included in a Perl script, \s may match the VT character. In PCRE, it never does.</p> -<p>In UTF-8 mode, characters with values greater than 128 never match \d, \s, or -\w, and always match \D, \S, and \W. This is true even when Unicode -character property support is available. These sequences retain their original -meanings from before UTF-8 support was available, mainly for efficiency -reasons.</p> +<p>A "word" character is an underscore or any character that is a letter or digit. +By default, the definition of letters and digits is controlled by PCRE's +low-valued character tables, in Erlang's case (and without the <c>unicode</c> option), +the ISO-Latin-1 character set.</p> -<p>The sequences \h, \H, \v, and \V are Perl 5.10 features. In contrast to the -other sequences, these do match certain high-valued codepoints in UTF-8 mode. -The horizontal space characters are:</p> +<p>By default, in <c>unicode</c> mode, characters with values greater than 128 never match +\d, \s, or \w, and always match \D, \S, and \W. These sequences retain +their original meanings from before UTF support was available, mainly for +efficiency reasons. However, if the <c>ucp</c> option is set, the behaviour is changed so that Unicode +properties are used to determine character types, as follows:</p> +<taglist> + <tag>\d</tag> <item>any character that \p{Nd} matches (decimal digit)</item> + <tag>\s</tag> <item>any character that \p{Z} matches, plus HT, LF, FF, CR)</item> + <tag> \w</tag> <item>any character that \p{L} or \p{N} matches, plus underscore)</item> +</taglist> +<p>The upper case escapes match the inverse sets of characters. Note that \d +matches only decimal digits, whereas \w matches any Unicode digit, as well as +any Unicode letter, and underscore. Note also that <c>ucp</c> affects \b, and +\B because they are defined in terms of \w and \W. Matching these sequences +is noticeably slower when <c>ucp</c> is set.</p> + +<p>The sequences \h, \H, \v, and \V are features that were added to Perl at +release 5.10. In contrast to the other sequences, which match only ASCII +characters by default, these always match certain high-valued codepoints, +whether or not <c>ucp</c> is set. The horizontal space characters are:</p> <taglist> - <tag>U+0009</tag> <item>Horizontal tab</item> + <tag>U+0009</tag> <item>Horizontal tab (HT)</item> <tag>U+0020</tag> <item>Space</item> <tag>U+00A0</tag> <item>Non-break space</item> <tag>U+1680</tag> <item>Ogham space mark</item> @@ -1069,23 +1353,22 @@ The horizontal space characters are:</p> <p>The vertical space characters are:</p> <taglist> - <tag>U+000A</tag> <item>Linefeed</item> - <tag>U+000B</tag> <item>Vertical tab</item> - <tag>U+000C</tag> <item>Formfeed</item> - <tag>U+000D</tag> <item>Carriage return</item> - <tag>U+0085</tag> <item>Next line</item> + <tag>U+000A</tag> <item>Linefeed (LF)</item> + <tag>U+000B</tag> <item>Vertical tab (VT)</item> + <tag>U+000C</tag> <item>Form feed (FF)</item> + <tag>U+000D</tag> <item>Carriage return (CR)</item> + <tag>U+0085</tag> <item>Next line (NEL)</item> <tag>U+2028</tag> <item>Line separator</item> <tag>U+2029</tag> <item>Paragraph separator</item> </taglist> -<p>A "word" character is an underscore or any character less than 256 that is a -letter or digit. The definition of letters and digits is controlled by PCRE's -low-valued character tables, which are always ISO-8859-1.</p> +<p>In 8-bit, non-UTF-8 mode, only the characters with codepoints less than 256 are +relevant.</p> <p><em>Newline sequences</em></p> <p>Outside a character class, by default, the escape sequence \R matches any -Unicode newline sequence. This is a Perl 5.10 feature. In non-UTF-8 mode \R is +Unicode newline sequence. In non-UTF-8 mode \R is equivalent to the following:</p> <quote><p> (?>\r\n|\n|\x0b|\f|\r|\x85)</p></quote> @@ -1094,11 +1377,11 @@ equivalent to the following:</p> <p>This particular group matches either the two-character sequence CR followed by LF, or one of the single characters LF (linefeed, U+000A), VT (vertical tab, -U+000B), FF (formfeed, U+000C), CR (carriage return, U+000D), or NEL (next +U+000B), FF (form feed, U+000C), CR (carriage return, U+000D), or NEL (next line, U+0085). The two-character sequence is treated as a single unit that cannot be split.</p> -<p>In UTF-8 mode, two additional characters whose codepoints are greater than 255 +<p>In Unicode mode, two additional characters whose codepoints are greater than 255 are added: LS (line separator, U+2028) and PS (paragraph separator, U+2029). Unicode character property support is not needed for these characters to be recognized.</p> @@ -1115,35 +1398,39 @@ one of the following sequences:</p> <p> (*BSR_ANYCRLF) CR, LF, or CRLF only (*BSR_UNICODE) any Unicode newline sequence</p> -<p>These override the default and the options given to <c>re:compile/2</c>, but -they can be overridden by options given to <c>re:run/3</c>. Note that these -special settings, which are not Perl-compatible, are recognized only at the -very start of a pattern, and that they must be in upper case. If more than one -of them is present, the last one is used. They can be combined with a change of -newline convention, for example, a pattern can start with:</p> +<p>These override the default and the options given to the compiling function, but +they can themselves be overridden by options given to a matching function. Note +that these special settings, which are not Perl-compatible, are recognized only +at the very start of a pattern, and that they must be in upper case. If more +than one of them is present, the last one is used. They can be combined with a +change of newline convention; for example, a pattern can start with:</p> <p> (*ANY)(*BSR_ANYCRLF)</p> -<p>Inside a character class, \R matches the letter "R".</p> - +<p>They can also be combined with the (*UTF8), (*UTF) or +(*UCP) special sequences. Inside a character class, \R is treated as an +unrecognized escape sequence, and so matches the letter "R" by default.</p> <p><em>Unicode character properties</em></p> -<p>When PCRE is built with Unicode character property support, three additional +<p>Three additional escape sequences that match characters with specific properties are available. -When not in UTF-8 mode, these sequences are of course limited to testing +When in 8-bit non-UTF-8 mode, these sequences are of course limited to testing characters whose codepoints are less than 256, but they do work in this mode. The extra escape sequences are:</p> +<taglist> +<tag>\p{<em>xx</em>}</tag> <item>a character with the <em>xx</em> property</item> +<tag>\P{<em>xx</em>}</tag> <item>a character without the <em>xx</em> property</item> +<tag>\X</tag> <item>a Unicode extended grapheme cluster</item> +</taglist> -<p> \p{<em>xx</em>} a character with the <em>xx</em> property - \P{<em>xx</em>} a character without the <em>xx</em> property - \X an extended Unicode sequence</p> - -<p>The property names represented by <em>xx</em> above are limited to the Unicode -script names, the general category properties, and "Any", which matches any -character (including newline). Other properties such as "InMusicalSymbols" are -not currently supported by PCRE. Note that \P{Any} does not match any -characters, so always causes a match failure.</p> +<p>The property names represented by <i>xx</i> above are limited to the Unicode +script names, the general category properties, "Any", which matches any +character (including newline), and some special PCRE properties (described +in the next section). +Other Perl properties such as "InMusicalSymbols" are not currently supported by +PCRE. Note that \P{Any} does not match any characters, so always causes a +match failure.</p> <p>Sets of Unicode characters are defined as belonging to certain scripts. A character from one of these sets can be matched using a script name. For @@ -1158,13 +1445,19 @@ example:</p> <list> <item>Arabic</item> <item>Armenian</item> +<item>Avestan</item> <item>Balinese</item> +<item>Bamum</item> +<item>Batak</item> <item>Bengali</item> <item>Bopomofo</item> <item>Braille</item> <item>Buginese</item> <item>Buhid</item> <item>Canadian_Aboriginal</item> +<item>Carian</item> +<item>Chakma</item> +<item>Cham</item> <item>Cherokee</item> <item>Common</item> <item>Coptic</item> @@ -1173,6 +1466,7 @@ example:</p> <item>Cyrillic</item> <item>Deseret</item> <item>Devanagari</item> +<item>Egyptian_Hieroglyphs</item> <item>Ethiopic</item> <item>Georgian</item> <item>Glagolitic</item> @@ -1185,16 +1479,31 @@ example:</p> <item>Hanunoo</item> <item>Hebrew</item> <item>Hiragana</item> +<item>Imperial_Aramaic</item> <item>Inherited</item> +<item>Inscriptional_Pahlavi</item> +<item>Inscriptional_Parthian</item> +<item>Javanese</item> +<item>Kaithi</item> <item>Kannada</item> <item>Katakana</item> +<item>Kayah_Li</item> <item>Kharoshthi</item> <item>Khmer</item> <item>Lao</item> <item>Latin</item> +<item>Lepcha</item> <item>Limbu</item> <item>Linear_B</item> +<item>Lisu</item> +<item>Lycian</item> +<item>Lydian</item> <item>Malayalam</item> +<item>Mandaic</item> +<item>Meetei_Mayek</item> +<item>Meroitic_Cursive</item> +<item>Meroitic_Hieroglyphs</item> +<item>Miao</item> <item>Mongolian</item> <item>Myanmar</item> <item>New_Tai_Lue</item> @@ -1203,17 +1512,29 @@ example:</p> <item>Old_Italic</item> <item>Old_Persian</item> <item>Oriya</item> +<item>Old_South_Arabian</item> +<item>Old_Turkic</item> +<item>Ol_Chiki</item> <item>Osmanya</item> <item>Phags_Pa</item> <item>Phoenician</item> +<item>Rejang</item> <item>Runic</item> +<item>Samaritan</item> +<item>Saurashtra</item> +<item>Sharada</item> <item>Shavian</item> <item>Sinhala</item> +<item>Sora_Sompeng</item> +<item>Sundanese</item> <item>Syloti_Nagri</item> <item>Syriac</item> <item>Tagalog</item> <item>Tagbanwa</item> <item>Tai_Le</item> +<item>Tai_Tham</item> +<item>Tai_Viet</item> +<item>Takri</item> <item>Tamil</item> <item>Telugu</item> <item>Thaana</item> @@ -1221,13 +1542,14 @@ example:</p> <item>Tibetan</item> <item>Tifinagh</item> <item>Ugaritic</item> +<item>Vai</item> <item>Yi</item> </list> -<p>Each character has exactly one general category property, specified by a -two-letter abbreviation. For compatibility with Perl, negation can be specified -by including a circumflex between the opening brace and the property name. For -example, \p{^Lu} is the same as \P{Lu}.</p> +<p>Each character has exactly one Unicode general category property, specified by +a two-letter abbreviation. For compatibility with Perl, negation can be +specified by including a circumflex between the opening brace and the property +name. For example, \p{^Lu} is the same as \P{Lu}.</p> <p>If only one letter is specified with \p or \P, it includes all the general category properties that start with that letter. In this case, in the absence @@ -1303,13 +1625,10 @@ the Lu, Ll, or Lt property, in other words, a letter that is not classified as a modifier or "other".</p> <p>The Cs (Surrogate) property applies only to characters in the range U+D800 to -U+DFFF. Such characters are not valid in UTF-8 strings (see RFC 3629) and so -cannot be tested by PCRE, unless UTF-8 validity checking has been turned off -(see the discussion of <c>no_utf8_check</c> in the -<em>pcreapi</em> -page).</p> +U+DFFF. Such characters are not valid in Unicode strings and so +cannot be tested by PCRE. Perl does not support the Cs property</p> -<p>The long synonyms for these properties that Perl supports (such as \p{Letter}) +<p>The long synonyms for property names that Perl supports (such as \p{Letter}) are not supported by PCRE, nor is it permitted to prefix any of these properties with "Is".</p> @@ -1318,31 +1637,79 @@ Instead, this property is assumed for any code point that is not in the Unicode table.</p> <p>Specifying caseless matching does not affect these escape sequences. For -example, \p{Lu} always matches only upper case letters.</p> - -<p>The \X escape matches any number of Unicode characters that form an extended -Unicode sequence. \X is equivalent to</p> +example, \p{Lu} always matches only upper case letters. This is different from +the behaviour of current versions of Perl.</p> +<p>Matching characters by Unicode property is not fast, because PCRE has to do a +multistage table lookup in order to find a character's property. That is why +the traditional escape sequences such as \d and \w do not use Unicode +properties in PCRE by default, though you can make them do so by setting the +<c>ucp</c> option or by starting the pattern with (*UCP).</p> + +<p><em>Extended grapheme clusters</em></p> +<p>The \X escape matches any number of Unicode characters that form an "extended +grapheme cluster", and treats the sequence as an atomic group (see below). +Up to and including release 8.31, PCRE matched an earlier, simpler definition +that was equivalent to</p> <quote><p> (?>\PM\pM*)</p></quote> -<p>That is, it matches a character without the "mark" property, followed by zero -or more characters with the "mark" property, and treats the sequence as an -atomic group -(see below). -Characters with the "mark" property are typically accents that affect the -preceding character. None of them have codepoints less than 256, so in -non-UTF-8 mode \X matches any one character.</p> +<p>That is, it matched a character without the "mark" property, followed by zero +or more characters with the "mark" property. Characters with the "mark" +property are typically non-spacing accents that affect the preceding character.</p> + +<p>This simple definition was extended in Unicode to include more complicated +kinds of composite character by giving each character a grapheme breaking +property, and creating rules that use these properties to define the boundaries +of extended grapheme clusters. In releases of PCRE later than 8.31, \X matches +one of these clusters.</p> -<p>Matching characters by Unicode property is not fast, because PCRE has to search -a structure that contains data for over fifteen thousand characters. That is -why the traditional escape sequences such as \d and \w do not use Unicode -properties in PCRE.</p> +<p>\X always matches at least one character. Then it decides whether to add +additional characters according to the following rules for ending a cluster:</p> +<taglist> +<tag>1.</tag> <item>End at the end of the subject string.</item> +<tag>2.</tag> <item>Do not end between CR and LF; otherwise end after any control character.</item> +<tag>3.</tag> <item>Do not break Hangul (a Korean script) syllable sequences. Hangul characters +are of five types: L, V, T, LV, and LVT. An L character may be followed by an +L, V, LV, or LVT character; an LV or V character may be followed by a V or T +character; an LVT or T character may be follwed only by a T character.</item> +<tag>4.</tag> <item>Do not end before extending characters or spacing marks. Characters with +the "mark" property always have the "extend" grapheme breaking property.</item> +<tag>5.</tag> <item>Do not end after prepend characters.</item> +<tag>6.</tag> <item>Otherwise, end the cluster.</item> +</taglist> + +<p><em>PCRE's additional properties</em></p> + +<p>As well as the standard Unicode properties described above, PCRE supports four +more that make it possible to convert traditional escape sequences such as \w +and \s and POSIX character classes to use Unicode properties. PCRE uses these +non-standard, non-Perl properties internally when PCRE_UCP is set. However, +they may also be used explicitly. These properties are:</p> +<taglist> + <tag>Xan</tag> <item>Any alphanumeric character</item> + <tag>Xps</tag> <item>Any POSIX space character</item> + <tag>Xsp</tag> <item>Any Perl space character</item> + <tag>Xwd</tag> <item>Any Perl "word" character</item> +</taglist> +<p>Xan matches characters that have either the L (letter) or the N (number) +property. Xps matches the characters tab, linefeed, vertical tab, form feed, or +carriage return, and any other character that has the Z (separator) property. +Xsp is the same as Xps, except that vertical tab is excluded. Xwd matches the +same characters as Xan, plus underscore.</p> + +<p>There is another non-standard property, Xuc, which matches any character that +can be represented by a Universal Character Name in C++ and other programming +languages. These are the characters $, @, ` (grave accent), and all characters +with Unicode code points greater than or equal to U+00A0, except for the +surrogates U+D800 to U+DFFF. Note that most base (ASCII) characters are +excluded. (Universal Character Names are of the form \uHHHH or \UHHHHHHHH +where H is a hexadecimal digit. Note that the Xuc property does not match these +sequences but the characters that they represent.)</p> <p><em>Resetting the match start</em></p> -<p>The escape sequence \K, which is a Perl 5.10 feature, causes any previously -matched characters not to be included in the final matched sequence. For -example, the pattern:</p> +<p>The escape sequence \K causes any previously matched characters not to be +included in the final matched sequence. For example, the pattern:</p> <quote><p> foo\Kbar</p></quote> @@ -1362,6 +1729,10 @@ For example, when the pattern</p> <p>matches "foobar", the first substring is still set to "foo".</p> +<p>Perl documents that the use of \K within assertions is "not well defined". In +PCRE, \K is acted upon when it occurs inside positive assertions, but is +ignored in negative assertions.</p> + <p><em>Simple assertions</em></p> <p>The final use of backslash is for certain simple assertions. An @@ -1382,13 +1753,20 @@ described below. The backslashed assertions are:</p> subject</item> </taglist> -<p>These assertions may not appear in character classes (but note that \b has a -different meaning, namely the backspace character, inside a character class).</p> +<p>Inside a character class, \b has a different meaning; it matches the backspace +character. If any other of these assertions appears in a character class, by +default it matches the corresponding literal character (for example, \B +matches the letter B). </p> <p>A word boundary is a position in the subject string where the current character and the previous character do not both match \w or \W (i.e. one matches \w and the other matches \W), or the start or end of the string if the -first or last character matches \w, respectively.</p> +first or last character matches \w, respectively. In a UTF mode, the meanings +of \w and \W can be changed by setting the <c>ucp</c> option. When this is +done, it also affects \b and \B. Neither PCRE nor Perl has a separate "start +of word" or "end of word" metasequence. However, whatever follows \b normally +determines which it is. For example, the fragment \ba matches "a" at the start +of a word.</p> <p>The \A, \Z, and \z assertions differ from the traditional circumflex and dollar (described in the next section) in that they only ever match at the very @@ -1422,9 +1800,13 @@ regular expression.</p> <section><marker id="sect4"></marker><title>Circumflex and dollar</title> +<p>The circumflex and dollar metacharacters are zero-width assertions. That is, +they test for a particular condition being true without consuming any +characters from the subject string.</p> + <p>Outside a character class, in the default matching mode, the circumflex -character is an assertion that is true only if the current matching point is -at the start of the subject string. If the <em>startoffset</em> argument of +character is an assertion that is true only if the current matching point is at +the start of the subject string. If the <i>startoffset</i> argument of <c>re:run/3</c> is non-zero, circumflex can never match if the <c>multiline</c> option is unset. Inside a character class, circumflex has an entirely different meaning (see below).</p> @@ -1437,12 +1819,12 @@ constrained to match only at the start of the subject, it is said to be an "anchored" pattern. (There are also other constructs that can cause a pattern to be anchored.)</p> -<p>A dollar character is an assertion that is true only if the current matching -point is at the end of the subject string, or immediately before a newline -at the end of the string (by default). Dollar need not be the last character of -the pattern if a number of alternatives are involved, but it should be the last -item in any branch in which it appears. Dollar has no special meaning in a -character class.</p> +<p>The dollar character is an assertion that is true only if the current matching +point is at the end of the subject string, or immediately before a newline at +the end of the string (by default). Note, however, that it does not actually +match the newline. Dollar need not be the last character of the pattern if a +number of alternatives are involved, but it should be the last item in any +branch in which it appears. Dollar has no special meaning in a character class.</p> <p>The meaning of dollar can be changed so that it matches only at the very end of the string, by setting the <c>dollar_endonly</c> option at @@ -1471,12 +1853,11 @@ end of the subject in both modes, and if all branches of a pattern start with </section> -<section><marker id="sect5"></marker><title>Full stop (period, dot)</title> +<section><marker id="sect5"></marker><title>Full stop (period, dot) and \N</title> <p>Outside a character class, a dot in the pattern matches any one character in the subject string except (by default) a character that signifies the end of a line. - In UTF-8 mode, the matched character may be more than one byte long. </p> <p>When a line ending is defined as a single character, dot never matches that @@ -1497,111 +1878,138 @@ the subject string, it takes two dots to match it.</p> circumflex and dollar, the only relationship being that they both involve newlines. Dot has no special meaning in a character class.</p> +<p>The escape sequence \N behaves like a dot, except that it is not affected by +the PCRE_DOTALL option. In other words, it matches any character except one +that signifies the end of a line. Perl also uses \N to match characters by +name; PCRE does not support this.</p> + </section> -<section><marker id="sect6"></marker><title>Matching a single byte</title> +<section><marker id="sect6"></marker><title>Matching a single data unit</title> -<p>Outside a character class, the escape sequence \C matches any one byte, both -in and out of UTF-8 mode. Unlike a dot, it always matches any line-ending -characters. The feature is provided in Perl in order to match individual bytes -in UTF-8 mode. Because it breaks up UTF-8 characters into individual bytes, -what remains in the string may be a malformed UTF-8 string. For this reason, -the \C escape sequence is best avoided.</p> +<p>Outside a character class, the escape sequence \C matches any one data unit, +whether or not a UTF mode is set. One data unit is one +byte. Unlike a dot, \C always +matches line-ending characters. The feature is provided in Perl in order to +match individual bytes in UTF-8 mode, but it is unclear how it can usefully be +used. Because \C breaks up characters into individual data units, matching one +unit with \C in a UTF mode means that the rest of the string may start with a +malformed UTF character. This has undefined results, because PCRE assumes that +it is dealing with valid UTF strings.</p> -<p>PCRE does not allow \C to appear in lookbehind assertions (described below), -because in UTF-8 mode this would make it impossible to calculate the length of +<p>PCRE does not allow \C to appear in lookbehind assertions (described below) +in a UTF mode, because this would make it impossible to calculate the length of the lookbehind.</p> +<p>In general, the \C escape sequence is best avoided. However, one +way of using it that avoids the problem of malformed UTF characters is to use a +lookahead to check the length of the next character, as in this pattern, which +could be used with a UTF-8 string (ignore white space and line breaks):</p> + +<code type="none"> + (?| (?=[\x00-\x7f])(\C) | + (?=[\x80-\x{7ff}])(\C)(\C) | + (?=[\x{800}-\x{ffff}])(\C)(\C)(\C) | + (?=[\x{10000}-\x{1fffff}])(\C)(\C)(\C)(\C))</code> + +<p>A group that starts with (?| resets the capturing parentheses numbers in each +alternative (see "Duplicate Subpattern Numbers" +below). The assertions at the start of each branch check the next UTF-8 +character for values whose encoding uses 1, 2, 3, or 4 bytes, respectively. The +character's individual bytes are then captured by the appropriate number of +groups.</p> + </section> <section><marker id="sect7"></marker><title>Square brackets and character classes</title> -<p>An opening square bracket introduces a character class, terminated -by a closing square bracket. A closing square bracket on its own is -not special. If a closing square bracket is required as a member of -the class, it should be the first data character in the class (after -an initial circumflex, if present) or escaped with a backslash.</p> - -<p>A character class matches a single character in the subject. -In -UTF-8 mode, the character may occupy more than one byte. -A matched -character must be in the set of characters defined by the class, -unless the first character in the class definition is a circumflex, in -which case the subject character must not be in the set defined by the -class. If a circumflex is actually required as a member of the class, -ensure it is not the first character, or escape it with a +<p>An opening square bracket introduces a character class, terminated by a closing +square bracket. A closing square bracket on its own is not special by default. +However, if the PCRE_JAVASCRIPT_COMPAT option is set, a lone closing square +bracket causes a compile-time error. If a closing square bracket is required as +a member of the class, it should be the first data character in the class +(after an initial circumflex, if present) or escaped with a backslash.</p> + +<p>A character class matches a single character in the subject. In a UTF mode, the +character may be more than one data unit long. A matched character must be in +the set of characters defined by the class, unless the first character in the +class definition is a circumflex, in which case the subject character must not +be in the set defined by the class. If a circumflex is actually required as a +member of the class, ensure it is not the first character, or escape it with a backslash.</p> <p>For example, the character class [aeiou] matches any lower case vowel, while [^aeiou] matches any character that is not a lower case vowel. Note that a circumflex is just a convenient notation for specifying the characters that are in the class by enumerating those that are not. A class that starts with a -circumflex is not an assertion: it still consumes a character from the subject +circumflex is not an assertion; it still consumes a character from the subject string, and therefore it fails if the current pointer is at the end of the string.</p> -<p>In UTF-8 mode, characters with values greater than 255 can be included in a -class as a literal string of bytes, or by using the \x{ escaping mechanism.</p> +<p>In UTF-8 mode, characters with values greater than 255 (0xffff) +can be included in a class as a literal string of data units, or by using the +\x{ escaping mechanism.</p> <p>When caseless matching is set, any letters in a class represent both their upper case and lower case versions, so for example, a caseless [aeiou] matches "A" as well as "a", and a caseless [^aeiou] does not match "A", whereas a -caseful version would. -In UTF-8 mode, PCRE always understands the concept of +caseful version would. In a UTF mode, PCRE always understands the concept of case for characters whose values are less than 128, so caseless matching is always possible. For characters with higher values, the concept of case is supported if PCRE is compiled with Unicode property support, but not otherwise. -If you want to use caseless matching for characters 128 and above, you must -ensure that PCRE is compiled with Unicode property support as well as with -UTF-8 support. -</p> - -<p>Characters that might indicate line breaks are never treated in any -special way when matching character classes, whatever line-ending -sequence is in use, and whatever setting of the <c>dotall</c> and -<c>multiline</c> options is used. A class such as [^a] always matches -one of these characters.</p> - -<p>The minus (hyphen) character can be used to specify a range of -characters in a character class. For example, [d-m] matches any letter -between d and m, inclusive. If a minus character is required in a -class, it must be escaped with a backslash or appear in a position -where it cannot be interpreted as indicating a range, typically as the -first or last character in the class.</p> - -<p>It is not possible to have the literal character "]" as the end -character of a range. A pattern such as [W-]46] is interpreted as a -class of two characters ("W" and "-") followed by a literal string -"46]", so it would match "W46]" or "-46]". However, if the "]" is -escaped with a backslash it is interpreted as the end of range, so -[W-\]46] is interpreted as a class containing a range followed by two -other characters. The octal or hexadecimal representation of "]" can -also be used to end a range.</p> +If you want to use caseless matching in a UTF mode for characters 128 and +above, you must ensure that PCRE is compiled with Unicode property support as +well as with UTF support.</p> + +<p>Characters that might indicate line breaks are never treated in any special way +when matching character classes, whatever line-ending sequence is in use, and +whatever setting of the PCRE_DOTALL and PCRE_MULTILINE options is used. A class +such as [^a] always matches one of these characters.</p> + +<p>The minus (hyphen) character can be used to specify a range of characters in a +character class. For example, [d-m] matches any letter between d and m, +inclusive. If a minus character is required in a class, it must be escaped with +a backslash or appear in a position where it cannot be interpreted as +indicating a range, typically as the first or last character in the class.</p> + +<p>It is not possible to have the literal character "]" as the end character of a +range. A pattern such as [W-]46] is interpreted as a class of two characters +("W" and "-") followed by a literal string "46]", so it would match "W46]" or +"-46]". However, if the "]" is escaped with a backslash it is interpreted as +the end of range, so [W-\]46] is interpreted as a class containing a range +followed by two other characters. The octal or hexadecimal representation of +"]" can also be used to end a range.</p> <p>Ranges operate in the collating sequence of character values. They can also be -used for characters specified numerically, for example [\000-\037]. -In UTF-8 -mode, ranges can include characters whose values are greater than 255, for -example [\x{100}-\x{2ff}]. -</p> +used for characters specified numerically, for example [\000-\037]. Ranges +can include any characters that are valid for the current mode.</p> <p>If a range that includes letters is used when caseless matching is set, it matches the letters in either case. For example, [W-c] is equivalent to -[][\\^_`wxyzabc], matched caselessly -, and in non-UTF-8 mode, if character +[][\\^_`wxyzabc], matched caselessly, and in a non-UTF mode, if character tables for a French locale are in use, [\xc8-\xcb] matches accented E -characters in both cases. In UTF-8 mode, PCRE supports the concept of case for +characters in both cases. In UTF modes, PCRE supports the concept of case for characters with values greater than 128 only when it is compiled with Unicode property support.</p> -<p>The character types \d, \D, \p, \P, \s, \S, \w, and \W may -also appear in a character class, and add the characters that they -match to the class. For example, [\dABCDEF] matches any hexadecimal -digit. A circumflex can conveniently be used with the upper case -character types to specify a more restricted set of characters than -the matching lower case type. For example, the class [^\W_] matches -any letter or digit, but not underscore.</p> +<p>The character escape sequences \d, \D, \h, \H, \p, \P, \s, \S, \v, +\V, \w, and \W may appear in a character class, and add the characters that +they match to the class. For example, [\dABCDEF] matches any hexadecimal +digit. In UTF modes, the <c>ucp</c> option affects the meanings of \d, \s, \w +and their upper case partners, just as it does when they appear outside a +character class, as described in the section entitled +"Generic character types" +above. The escape sequence \b has a different meaning inside a character +class; it matches the backspace character. The sequences \B, \N, \R, and \X +are not special inside a character class. Like any other unrecognized escape +sequences, they are treated as the literal characters "B", "N", "R", and "X".</p> + +<p>A circumflex can conveniently be used with the upper case character types to +specify a more restricted set of characters than the matching lower case type. +For example, the class [^\W_] matches any letter or digit, but not underscore, +whereas [\w] includes underscore. A positive character class should be read as +"something OR something OR ..." and a negative class as "NOT something AND NOT +something AND NOT ...".</p> <p>The only metacharacters that are recognized in character classes are backslash, hyphen (only where it can be interpreted as specifying @@ -1611,7 +2019,6 @@ next section), and the terminating closing square bracket. However, escaping other non-alphanumeric characters does no harm.</p> </section> - <section><marker id="sect8"></marker><title>POSIX character classes</title> <p>Perl supports the POSIX notation for character classes. This uses names @@ -1621,7 +2028,7 @@ this notation. For example,</p> <quote><p> [01[:alpha:]%]</p></quote> <p>matches "0", "1", any alphabetic character, or "%". The supported class names -are</p> +are:</p> <taglist> <tag>alnum</tag> <item>letters and digits</item> @@ -1633,7 +2040,7 @@ are</p> <tag>graph</tag> <item>printing characters, excluding space</item> <tag>lower</tag> <item>lower case letters</item> <tag>print</tag> <item>printing characters, including space</item> - <tag>punct</tag> <item>printing characters, excluding letters and digits</item> + <tag>punct</tag> <item>printing characters, excluding letters and digits and space</item> <tag>space</tag> <item>whitespace (not quite the same as \s)</item> <tag>upper</tag> <item>upper case letters</item> <tag>word</tag> <item>"word" characters (same as \w)</item> @@ -1655,8 +2062,26 @@ by a ^ character after the colon. For example,</p> syntax [.ch.] and [=ch=] where "ch" is a "collating element", but these are not supported, and an error is given if they are encountered.</p> -<p>In UTF-8 mode, characters with values greater than 128 do not match any of -the POSIX character classes.</p> +<p>By default, in UTF modes, characters with values greater than 128 do not match +any of the POSIX character classes. However, if the PCRE_UCP option is passed +to <b>pcre_compile()</b>, some of the classes are changed so that Unicode +character properties are used. This is achieved by replacing the POSIX classes +by other sequences, as follows:</p> + +<taglist> + <tag>[:alnum:]</tag> <item>becomes <em>\p{Xan}</em></item> + <tag>[:alpha:]</tag> <item>becomes <em>\p{L}</em></item> + <tag>[:blank:]</tag> <item>becomes <em>\h</em></item> + <tag>[:digit:</tag>] <item>becomes <em>\p{Nd}</em></item> + <tag>[:lower:]</tag> <item>becomes <em>\p{Ll}</em></item> + <tag>[:space:]</tag> <item>becomes <em>\p{Xps}</em></item> + <tag>[:upper:</tag>] <item>becomes <em>\p{Lu}</em></item> + <tag>[:word:]</tag> <item>becomes <em>\p{Xwd}</em></item> +</taglist> + +<p>Negated versions, such as [:^alpha:] use \P instead of \p. The other POSIX +classes are unchanged, and match only characters with code points less than +128.</p> </section> @@ -1703,19 +2128,13 @@ unset.</p> <c>extra</c> can be changed in the same way as the Perl-compatible options by using the characters J, U and X respectively.</p> -<p>When an option change occurs at top level (that is, not inside subpattern -parentheses), the change applies to the remainder of the pattern that follows. -If the change is placed right at the start of a pattern, PCRE extracts it into -the global options -<!-- XXX C Interface -(and it will therefore show up in data extracted by the -<c>pcre_fullinfo()</c> function). ---> -</p> +<p>When one of these option changes occurs at top level (that is, not inside +subpattern parentheses), the change applies to the remainder of the pattern +that follows. If the change is placed right at the start of a pattern, PCRE +extracts it into the global options.</p> -<p>An option change within a subpattern (see below for a description -of subpatterns) affects only that part of the current pattern that -follows it, so</p> +<p>An option change within a subpattern (see below for a description of +subpatterns) affects only that part of the subpattern that follows it, so</p> <quote><p> (a(?i)b)c</p></quote> @@ -1733,11 +2152,16 @@ option settings happen at compile time. There would be some very weird behaviour otherwise.</p> <p><em>Note:</em> There are other PCRE-specific options that can be set by the -application when the compile or match functions are called. In some cases the -pattern can contain special leading sequences to override what the application -has set or what has been defaulted. Details are given in the section entitled -"Newline sequences" above.</p> - +application when the compiling or matching functions are called. In some cases +the pattern can contain special leading sequences such as (*CRLF) to override +what the application has set or what has been defaulted. Details are given in +the section entitled "Newline sequences" +above. There are also the (*UTF8) and (*UCP) leading +sequences that can be used to set UTF and Unicode property modes; they are +equivalent to setting the <c>unicode</c> and the <c>ucp</c> +options, respectively. The (*UTF) sequence is a generic version that can be +used with any of the libraries. However, the application can set the +<c>never_utf</c> option, which locks out the use of the (*UTF) sequences.</p> </section> @@ -1751,16 +2175,17 @@ things:</p> <quote><p> cat(aract|erpillar|)</p></quote> -<p>matches one of the words "cat", "cataract", or "caterpillar". Without the -parentheses, it would match "cataract", "erpillar" or an empty string.</p> +<p>matches "cataract", "caterpillar", or "cat". Without the parentheses, it would +match "cataract", "erpillar" or an empty string.</p> <p>2. It sets up the subpattern as a capturing subpattern. This means that, when the complete pattern matches, that portion of the subject string that matched the subpattern is passed back to the caller via the return value of -<c>re:run/3</c>. Opening parentheses are counted from left to right (starting -from 1) to obtain numbers for the capturing subpatterns.</p> - -<p>For example, if the string "the red king" is matched against the pattern</p> +<c>re:run/3</c>.</p> + +<p>Opening parentheses are counted from left to right (starting +from 1) to obtain numbers for the capturing subpatterns.For example, if the string +"the red king" is matched against the pattern</p> <quote><p> the ((red|white) (king|queen))</p></quote> @@ -1793,7 +2218,6 @@ from left to right, and options are not reset until the end of the subpattern is reached, an option setting in one branch does affect subsequent branches, so the above patterns match "SUNDAY" as well as "Saturday".</p> - </section> <section><marker id="sect12"></marker><title>Duplicate subpattern numbers</title> @@ -1811,18 +2235,30 @@ at captured substring number one, whichever alternative matched. This construct is useful when you want to capture part, but not all, of one of a number of alternatives. Inside a (?| group, parentheses are numbered as usual, but the number is reset at the start of each branch. The numbers of any capturing -buffers that follow the subpattern start after the highest number used in any -branch. The following example is taken from the Perl documentation. -The numbers underneath show in which buffer the captured content will be -stored.</p> +parentheses that follow the subpattern start after the highest number used in +any branch. The following example is taken from the Perl documentation. The +numbers underneath show in which buffer the captured content will be stored.</p> <code type="none"> # before ---------------branch-reset----------- after / ( a ) (?| x ( y ) z | (p (q) r) | (t) u (v) ) ( z ) /x # 1 2 2 3 2 3 4</code> -<p>A backreference or a recursive call to a numbered subpattern always -refers to the first one in the pattern with the given number.</p> +<p>A back reference to a numbered subpattern uses the most recent value that is +set for that number by any subpattern. The following pattern matches "abcabc" +or "defdef":</p> + +<quote><p> /(?|(abc)|(def))\1/</p></quote> + +<p>In contrast, a subroutine call to a numbered subpattern always refers to the +first one in the pattern with the given number. The following pattern matches +"abcabc" or "defabc":</p> + +<quote><p> /(?|(abc)|(def))(?1)/</p></quote> + +<p>If a condition test +for a subpattern's having matched refers to a non-unique number, the test is +true if any of the subpatterns of that number have matched.</p> <p>An alternative approach to using this "branch reset" feature is to use duplicate named subpatterns, as described in the next section.</p> @@ -1837,12 +2273,13 @@ if an expression is modified, the numbers may change. To help with this difficulty, PCRE supports the naming of subpatterns. This feature was not added to Perl until release 5.10. Python had the feature earlier, and PCRE introduced it at release 4.0, using the Python syntax. PCRE now supports both -the Perl and the Python syntax.</p> +the Perl and the Python syntax. Perl allows identically numbered subpatterns to +have different names, but PCRE does not.</p> <p>In PCRE, a subpattern can be named in one of three ways: (?<name>...) or (?'name'...) as in Perl, or (?P<name>...) as in Python. References to capturing parentheses from other parts of -the pattern, such as backreferences, recursion, and conditions, can be +the pattern, such as back references, recursion, and conditions, can be made by name as well as by number.</p> <p>Names consist of up to 32 alphanumeric characters and underscores. Named @@ -1857,11 +2294,13 @@ The <c>capture</c> specification to <c>re:run/3</c> can use named values if they </p> <p>By default, a name must be unique within a pattern, but it is possible to relax -this constraint by setting the <c>dupnames</c> option at compile time. This can -be useful for patterns where only one instance of the named parentheses can -match. Suppose you want to match the name of a weekday, either as a 3-letter -abbreviation or as the full name, and in both cases you want to extract the -abbreviation. This pattern (ignoring the line breaks) does the job:</p> +this constraint by setting the <c>dupnames</c> option at compile time. (Duplicate +names are also always permitted for subpatterns with the same number, set up as +described in the previous section.) Duplicate names can be useful for patterns +where only one instance of the named parentheses can match. Suppose you want to +match the name of a weekday, either as a 3-letter abbreviation or as the full +name, and in both cases you want to extract the abbreviation. This pattern +(ignoring the line breaks) does the job:</p> <code type="none"> (?<DN>Mon|Fri|Sun)(?:day)?| @@ -1887,7 +2326,13 @@ details of the interfaces for handling named subpatterns, see the documentation.</p> --> -<p>In case of capturing named subpatterns which are not unique, the first occurrence is returned from <c>re:exec/3</c>, if the name is specified int the <c>values</c> part of the <c>capture</c> statement.</p> +<p>In case of capturing named subpatterns which names are not unique, the first matching occurrence (counted from left to right in the subject) is returned from <c>re:exec/3</c>, if the name is specified in the <c>values</c> part of the <c>capture</c> statement. The <c>all_names</c> capturing value will match all of the names in the same way.</p> + +<p><em>Warning:</em> You cannot use different names to distinguish between two +subpatterns with the same number because PCRE uses only the numbers when +matching. For this reason, an error is given at compile time if different names +are given to subpatterns with the same number. However, you can give the same +name to subpatterns with the same number, even when <c>dupnames</c> is not set.</p> </section> @@ -1900,14 +2345,13 @@ following items:</p> <item>a literal data character</item> <item>the dot metacharacter</item> <item>the \C escape sequence</item> - <item>the \X escape sequence -(in UTF-8 mode with Unicode properties) - </item> + <item>the \X escape sequence</item> <item>the \R escape sequence</item> - <item>an escape such as \d that matches a single character</item> + <item>an escape such as \d or \pL that matches a single character</item> <item>a character class</item> <item>a back reference (see next section)</item> - <item>a parenthesized subpattern (unless it is an assertion)</item> + <item>a parenthesized subpattern (including assertions)</item> + <item>a subroutine call to a subpattern (recursive or otherwise)</item> </list> <p>The general repetition quantifier specifies a minimum and maximum number of @@ -1933,14 +2377,18 @@ where a quantifier is not allowed, or one that does not match the syntax of a quantifier, is taken as a literal character. For example, {,6} is not a quantifier, but a literal string of four characters.</p> -<p>In UTF-8 mode, quantifiers apply to UTF-8 characters rather than to individual -bytes. Thus, for example, \x{100}{2} matches two UTF-8 characters, each of -which is represented by a two-byte sequence. Similarly, when Unicode property -support is available, \X{3} matches three Unicode extended sequences, each of -which may be several bytes long (and they may be of different lengths).</p> - +<p>In Unicode mode, quantifiers apply to characters rather than to individual data +units. Thus, for example, \x{100}{2} matches two characters, each of +which is represented by a two-byte sequence in a UTF-8 string. Similarly, +\X{3} matches three Unicode extended grapheme clusters, each of which may be +several data units long (and they may be of different lengths).</p> <p>The quantifier {0} is permitted, causing the expression to behave as if the -previous item and the quantifier were not present.</p> +previous item and the quantifier were not present. This may be useful for +subpatterns that are referenced as subroutines +from elsewhere in the pattern (but see also the section entitled +"Defining subpatterns for use by reference only" +below). Items other than subpatterns that have a {0} quantifier are omitted +from the compiled pattern.</p> <p>For convenience, the three most common quantifiers have single-character abbreviations:</p> @@ -2014,8 +2462,8 @@ pattern as though it were preceded by \A.</p> worth setting <c>dotall</c> in order to obtain this optimization, or alternatively using ^ to indicate anchoring explicitly.</p> -<p>However, there is one situation where the optimization cannot be used. When .* -is inside capturing parentheses that are the subject of a backreference +<p>However, there are some cases where the optimization cannot be used. When .* +is inside capturing parentheses that are the subject of a back reference elsewhere in the pattern, a match at the start may fail where a later one succeeds. Consider, for example:</p> @@ -2024,6 +2472,15 @@ succeeds. Consider, for example:</p> <p>If the subject is "xyz123abc123" the match point is the fourth character. For this reason, such a pattern is not implicitly anchored.</p> +<p>Another case where implicit anchoring is not applied is when the leading .* is +inside an atomic group. Once again, a match at the start may fail where a later +one succeeds. Consider this pattern:</p> + +<quote><p> (?>.*?a)b</p></quote> + +<p>It matches "ab" in the subject "aab". The use of the backtracking control verbs +(*PRUNE) and (*SKIP) also disable this optimization.</p> + <p>When a capturing subpattern is repeated, the value captured is the substring that matched the final iteration. For example, after</p> @@ -2162,11 +2619,10 @@ further details of the handling of digits following a backslash. There is no such problem when named parentheses are used. A back reference to any subpattern is possible using named parentheses (see below).</p> -<p>Another way of avoiding the ambiguity inherent in the use of digits -following a backslash is to use the \g escape sequence, which is a -feature introduced in Perl 5.10. This escape must be followed by an -unsigned number or a negative number, optionally enclosed in -braces. These examples are all identical:</p> +<p>Another way of avoiding the ambiguity inherent in the use of digits following a +backslash is to use the \g escape sequence. This escape must be followed by an +unsigned number or a negative number, optionally enclosed in braces. These +examples are all identical:</p> <list> <item>(ring), \1</item> @@ -2182,10 +2638,10 @@ reference. Consider this example:</p> <quote><p> (abc(def)ghi)\g{-1}</p></quote> <p>The sequence \g{-1} is a reference to the most recently started capturing -subpattern before \g, that is, is it equivalent to \2. Similarly, \g{-2} -would be equivalent to \1. The use of relative references can be helpful in -long patterns, and also in patterns that are created by joining together -fragments that contain references within themselves.</p> +subpattern before \g, that is, is it equivalent to \2 in this example. +Similarly, \g{-2} would be equivalent to \1. The use of relative references +can be helpful in long patterns, and also in patterns that are created by +joining together fragments that contain references within themselves.</p> <p>A back reference matches whatever actually matched the capturing subpattern in the current subject string, rather than anything @@ -2234,6 +2690,8 @@ some delimiter must be used to terminate the back reference. If the <c>extended</c> option is set, this can be whitespace. Otherwise an empty comment (see "Comments" below) can be used.</p> +<p><em>Recursive back references</em></p> + <p>A back reference that occurs inside the parentheses to which it refers fails when the subpattern is first used, so, for example, (a\1) never matches. However, such references can be useful inside repeated subpatterns. For @@ -2248,6 +2706,11 @@ that the first iteration does not need to match the back reference. This can be done using alternation, as in the example above, or by a quantifier with a minimum of zero.</p> +<p>Back references of this type cause the group that they reference to be treated +as an atomic group. +Once the whole group has been matched, a subsequent matching failure cannot +cause backtracking into the middle of the group.</p> + </section> <section><marker id="sect17"></marker><title>Assertions</title> @@ -2263,12 +2726,27 @@ those that look ahead of the current position in the subject string, and those that look behind it. An assertion subpattern is matched in the normal way, except that it does not cause the current matching position to be changed.</p> -<p>Assertion subpatterns are not capturing subpatterns, and may not be repeated, -because it makes no sense to assert the same thing several times. If any kind -of assertion contains capturing subpatterns within it, these are counted for -the purposes of numbering the capturing subpatterns in the whole pattern. -However, substring capturing is carried out only for positive assertions, -because it does not make sense for negative assertions.</p> +<p>Assertion subpatterns are not capturing subpatterns. If such an assertion +contains capturing subpatterns within it, these are counted for the purposes of +numbering the capturing subpatterns in the whole pattern. However, substring +capturing is carried out only for positive assertions. (Perl sometimes, but not +always, does do capturing in negative assertions.)</p> + +<p>For compatibility with Perl, assertion subpatterns may be repeated; though +it makes no sense to assert the same thing several times, the side effect of +capturing parentheses may occasionally be useful. In practice, there only three +cases:</p> + +<taglist> +<tag>(1)</tag> <item>If the quantifier is {0}, the assertion is never obeyed during matching. +However, it may contain internal capturing parenthesized groups that are called +from elsewhere via the subroutine mechanism.</item> +<tag>(2)</tag> <item>If quantifier is {0,n} where n is greater than zero, it is treated as if it +were {0,1}. At run time, the rest of the pattern match is tried with and +without the assertion, the order depending on the greediness of the quantifier.</item> +<tag>(3)</tag> <item>If the minimum repetition is greater than zero, the quantifier is ignored. +The assertion is obeyed just once when encountered during matching.</item> +</taglist> <p><em>Lookahead assertions</em></p> @@ -2294,7 +2772,8 @@ lookbehind assertion is needed to achieve the other effect.</p> <p>If you want to force a matching failure at some point in a pattern, the most convenient way to do it is with (?!) because an empty string always matches, so -an assertion that requires there not to be an empty string must always fail.</p> +an assertion that requires there not to be an empty string must always fail. +The backtracking control verb (*FAIL) or (*F) is a synonym for (?!).</p> <p><em>Lookbehind assertions</em></p> @@ -2317,33 +2796,38 @@ do not all have to have the same fixed length. Thus</p> <p>causes an error at compile time. Branches that match different length strings are permitted only at the top level of a lookbehind assertion. This is an -extension compared with Perl (at least for 5.8), which requires all branches to +extension compared with Perl, which requires all branches to match the same length of string. An assertion such as</p> <quote><p> (?<=ab(c|de))</p></quote> <p>is not permitted, because its single top-level branch can match two different -lengths, but it is acceptable if rewritten to use two top-level branches:</p> +lengths, but it is acceptable to PCRE if rewritten to use two top-level +branches:</p> <quote><p> (?<=abc|abde)</p></quote> -<p>In some cases, the Perl 5.10 escape sequence \K (see above) can be -used instead of a lookbehind assertion; this is not restricted to a -fixed-length.</p> +<p>In some cases, the escape sequence \K (see above) can be +used instead of a lookbehind assertion to get round the fixed-length +restriction.</p> <p>The implementation of lookbehind assertions is, for each alternative, to temporarily move the current position back by the fixed length and then try to match. If there are insufficient characters before the current position, the assertion fails.</p> -<p>PCRE does not allow the \C escape (which matches a single byte in UTF-8 mode) -to appear in lookbehind assertions, because it makes it impossible to calculate -the length of the lookbehind. The \X and \R escapes, which can match -different numbers of bytes, are also not permitted.</p> +<p>In a UTF mode, PCRE does not allow the \C escape (which matches a single data +unit even in a UTF mode) to appear in lookbehind assertions, because it makes +it impossible to calculate the length of the lookbehind. The \X and \R +escapes, which can match different numbers of data units, are also not +permitted.</p> +<p>"Subroutine" calls (see below) such as (?2) or (?&X) are permitted in lookbehinds, as long +as the subpattern matches a fixed-length string. Recursion, +however, is not supported.</p> <p>Possessive quantifiers can be used in conjunction with lookbehind assertions to -specify efficient matching at the end of the subject string. Consider a simple -pattern such as</p> +specify efficient matching of fixed-length strings at the end of subject +strings. Consider a simple pattern such as</p> <quote><p> abcd$</p></quote> @@ -2406,8 +2890,8 @@ characters that are not "999".</p> <p>It is possible to cause the matching process to obey a subpattern conditionally or to choose between two alternative subpatterns, depending on -the result of an assertion, or whether a previous capturing subpattern matched -or not. The two possible forms of conditional subpattern are</p> +the result of an assertion, or whether a specific capturing subpattern has +already been matched. The two possible forms of conditional subpattern are:</p> <list> <item>(?(condition)yes-pattern)</item> @@ -2416,7 +2900,13 @@ or not. The two possible forms of conditional subpattern are</p> <p>If the condition is satisfied, the yes-pattern is used; otherwise the no-pattern (if present) is used. If there are more than two alternatives in the -subpattern, a compile-time error occurs.</p> +subpattern, a compile-time error occurs. Each of the two alternatives may +itself contain nested subpatterns of any form, including conditional +subpatterns; the restriction to two alternatives applies only at the level of +the condition. This pattern fragment is an example where the alternatives are +complex:</p> + +<quote><p> (?(1) (A|B|C) | (D | (?(2)E|F) | E) )</p></quote> <p>There are four kinds of condition: references to subpatterns, references to recursion, a pseudo-condition called DEFINE, and assertions.</p> @@ -2425,13 +2915,16 @@ recursion, a pseudo-condition called DEFINE, and assertions.</p> <p><em>Checking for a used subpattern by number</em></p> <p>If the text between the parentheses consists of a sequence of -digits, the condition is true if the capturing subpattern of that -number has previously matched. An alternative notation is to precede -the digits with a plus or minus sign. In this case, the subpattern -number is relative rather than absolute. The most recently opened -parentheses can be referenced by (?(-1), the next most recent by -(?(-2), and so on. In looping constructs it can also make sense to -refer to subsequent groups with constructs such as (?(+2).</p> +digits, the condition is true if a capturing subpattern of that number has previously +matched. If there is more than one capturing subpattern with the same number +(see the earlier section about duplicate subpattern numbers), +the condition is true if any of them have matched. An alternative notation is +to precede the digits with a plus or minus sign. In this case, the subpattern +number is relative rather than absolute. The most recently opened parentheses +can be referenced by (?(-1), the next most recent by (?(-2), and so on. Inside +loops it can also make sense to refer to subsequent groups. The next +parentheses to be opened can be referenced as (?(+1), and so on. (The value +zero in any of these forms is not used; it provokes a compile-time error.)</p> <p>Consider the following pattern, which contains non-significant whitespace to make it more readable (assume the <c>extended</c> @@ -2442,7 +2935,7 @@ option) and to divide it into three parts for ease of discussion:</p> <p>The first part matches an optional opening parenthesis, and if that character is present, sets it as the first captured substring. The second part matches one or more characters that are not parentheses. The third part is a -conditional subpattern that tests whether the first set of parentheses matched +conditional subpattern that tests whether or not the first set of parentheses matched or not. If they did, that is, if subject started with an opening parenthesis, the condition is true, and so the yes-pattern is executed and a closing parenthesis is required. Otherwise, since no-pattern is not present, the @@ -2472,6 +2965,10 @@ consist entirely of digits is not recommended.</p> <quote><p> (?<OPEN> \( )? [^()]+ (?(<OPEN>) \) )</p></quote> +<p>If the name used in a condition of this kind is a duplicate, the test is +applied to all subpatterns of the same name, and is true if any one of them has +matched.</p> + <p><em>Checking for pattern recursion</em></p> <p>If the condition is the string (R), and there is no subpattern with @@ -2481,12 +2978,14 @@ by ampersand follow the letter R, for example:</p> <quote><p> (?(R3)...) or (?(R&name)...)</p></quote> -<p>the condition is true if the most recent recursion is into the +<p>the condition is true if the most recent recursion is into a subpattern whose number or name is given. This condition does not -check the entire recursion stack.</p> +check the entire recursion stack. If the name used in a condition of this kind is a duplicate, the test is +applied to all subpatterns of the same name, and is true if any one of them is +the most recent recursion.</p> -<p>At "top level", all these recursion test conditions are false. Recursive -patterns are described below.</p> +<p>At "top level", all these recursion test conditions are false. The syntax for recursive +patterns is described below.</p> <p><em>Defining subpatterns for use by reference only</em></p> @@ -2494,21 +2993,21 @@ patterns are described below.</p> name DEFINE, the condition is always false. In this case, there may be only one alternative in the subpattern. It is always skipped if control reaches this point in the pattern; the idea of DEFINE is that it can be used to define -"subroutines" that can be referenced from elsewhere. (The use of "subroutines" -is described below.) For example, a pattern to match an IPv4 address could be +"subroutines" that can be referenced from elsewhere. (The use of subroutines +is described below.) For example, a pattern to match an IPv4 address such as +"192.168.23.245" could be written like this (ignore whitespace and line breaks):</p> <quote><p> (?(DEFINE) (?<byte> 2[0-4]\d | 25[0-5] | 1\d\d | [1-9]?\d) ) \b (?&byte) (\.(?&byte)){3} \b</p></quote> -<p>The first part of the pattern is a DEFINE group inside which a another group -named "byte" is defined. This matches an individual component of an IPv4 -address (a number less than 256). When matching takes place, this part of the -pattern is skipped because DEFINE acts like a false condition.</p> - -<p>The rest of the pattern uses references to the named group to match the four -dot-separated components of an IPv4 address, insisting on a word boundary at -each end.</p> +<p>The first part of the pattern is a DEFINE group inside which a +another group named "byte" is defined. This matches an individual +component of an IPv4 address (a number less than 256). When matching +takes place, this part of the pattern is skipped because DEFINE acts +like a false condition. The rest of the pattern uses references to the +named group to match the four dot-separated components of an IPv4 +address, insisting on a word boundary at each end.</p> <p><em>Assertion conditions</em></p> @@ -2533,14 +3032,31 @@ dd-aaa-dd or dd-dd-dd, where aaa are letters and dd are digits.</p> <section><marker id="sect19"></marker><title>Comments</title> -<p>The sequence (?# marks the start of a comment that continues up to the next -closing parenthesis. Nested parentheses are not permitted. The characters -that make up a comment play no part in the pattern matching at all.</p> - -<p>If the <c>extended</c> option is set, an unescaped # character outside a -character class introduces a comment that continues to immediately after the -next newline in the pattern.</p> +<p>There are two ways of including comments in patterns that are processed by +PCRE. In both cases, the start of the comment must not be in a character class, +nor in the middle of any other sequence of related characters such as (?: or a +subpattern name or number. The characters that make up a comment play no part +in the pattern matching.</p> +<p>The sequence (?# marks the start of a comment that continues up to the next +closing parenthesis. Nested parentheses are not permitted. If the PCRE_EXTENDED +option is set, an unescaped # character also introduces a comment, which in +this case continues to immediately after the next newline character or +character sequence in the pattern. Which characters are interpreted as newlines +is controlled by the options passed to a compiling function or by a special +sequence at the start of the pattern, as described in the section entitled +"Newline conventions" +above. Note that the end of this type of comment is a literal newline sequence +in the pattern; escape sequences that happen to represent a newline do not +count. For example, consider this pattern when <c>extended</c> is set, and the +default newline convention is in force:</p> + +<quote><p> abc #comment \n still comment</p></quote> + +<p>On encountering the # character, <b>pcre_compile()</b> skips along, looking for +a newline in the pattern. The sequence \n is still literal at this stage, so +it does not terminate the comment. Only an actual character with the code value +0x0a (the default newline) does so.</p> </section> @@ -2566,51 +3082,45 @@ case refers recursively to the pattern in which it appears.</p> <p>Obviously, PCRE cannot support the interpolation of Perl code. Instead, it supports special syntax for recursion of the entire pattern, and also for individual subpattern recursion. After its introduction in PCRE and Python, -this kind of recursion was introduced into Perl at release 5.10.</p> +this kind of recursion was subsequently introduced into Perl at release 5.10.</p> <p>A special item that consists of (? followed by a number greater -than zero and a closing parenthesis is a recursive call of the +than zero and a closing parenthesis is a recursive subroutine call of the subpattern of the given number, provided that it occurs inside that -subpattern. (If not, it is a "subroutine" call, which is described in +subpattern. (If not, it is a non-recursive subroutine call, which is described in the next section.) The special item (?R) or (?0) is a recursive call of the entire regular expression.</p> -<p>In PCRE (like Python, but unlike Perl), a recursive subpattern call -is always treated as an atomic group. That is, once it has matched -some of the subject string, it is never re-entered, even if it -contains untried alternatives and there is a subsequent matching -failure.</p> - <p>This PCRE pattern solves the nested parentheses problem (assume the <c>extended</c> option is set so that whitespace is ignored):</p> -<quote><p> \( ( (?>[^()]+) | (?R) )* \)</p></quote> +<quote><p> \( ( [^()]++ | (?R) )* \)</p></quote> <p>First it matches an opening parenthesis. Then it matches any number of substrings which can either be a sequence of non-parentheses, or a recursive match of the pattern itself (that is, a correctly -parenthesized substring). Finally there is a closing parenthesis.</p> +parenthesized substring). Finally there is a closing +parenthesis. Note the use of a possessive quantifier to avoid +backtracking into sequences of non-parentheses.</p> <p>If this were part of a larger pattern, you would not want to recurse the entire pattern, so instead you could use this:</p> -<quote><p> ( \( ( (?>[^()]+) | (?1) )* \) )</p></quote> +<quote><p> ( \( ( [^()]++ | (?1) )* \) )</p></quote> <p>We have put the pattern into parentheses, and caused the recursion to refer to them instead of the whole pattern.</p> -<p>In a larger pattern, keeping track of parenthesis numbers can be -tricky. This is made easier by the use of relative references. (A Perl -5.10 feature.) Instead of (?1) in the pattern above you can write -(?-2) to refer to the second most recently opened parentheses -preceding the recursion. In other words, a negative number counts -capturing parentheses leftwards from the point at which it is -encountered.</p> +<p>In a larger pattern, keeping track of parenthesis numbers can be tricky. This +is made easier by the use of relative references. Instead of (?1) in the +pattern above you can write (?-2) to refer to the second most recently opened +parentheses preceding the recursion. In other words, a negative number counts +capturing parentheses leftwards from the point at which it is encountered.</p> <p>It is also possible to refer to subsequently opened parentheses, by writing references such as (?+2). However, these cannot be recursive because the reference is not inside the parentheses that are -referenced. They are always "subroutine" calls, as described in the +referenced. They are always non-recursive subroutine calls, as described in the next section.</p> <p>An alternative approach is to use named parentheses instead. The @@ -2618,75 +3128,136 @@ Perl syntax for this is (?&name); PCRE's earlier syntax (?P>name) is also supported. We could rewrite the above example as follows:</p> -<quote><p> (?<pn> \( ( (?>[^()]+) | (?&pn) )* \) )</p></quote> +<quote><p> (?<pn> \( ( [^()]++ | (?&pn) )* \) )</p></quote> <p>If there is more than one subpattern with the same name, the earliest one is used.</p> <p>This particular example pattern that we have been looking at contains nested -unlimited repeats, and so the use of atomic grouping for matching strings of -non-parentheses is important when applying the pattern to strings that do not -match. For example, when this pattern is applied to</p> +unlimited repeats, and so the use of a possessive quantifier for matching +strings of non-parentheses is important when applying the pattern to strings +that do not match. For example, when this pattern is applied to</p> <quote><p> (aaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaa()</p></quote> -<p>it yields "no match" quickly. However, if atomic grouping is not used, +<p>it yields "no match" quickly. However, if a possessive quantifier is not used, the match runs for a very long time indeed because there are so many different ways the + and * repeats can carve up the subject, and all have to be tested before failure can be reported.</p> -<p>At the end of a match, the values set for any capturing subpatterns are those -from the outermost level of the recursion at which the subpattern value is set. +<p>At the end of a match, the values of capturing parentheses are those from +the outermost level. If the pattern above is matched against</p> -<!-- XXX C Interface -If you want to obtain intermediate values, a callout function can be used (see -below and the +<quote><p> (ab(cd)ef)</p></quote> -<em>pcrecallout</em> +<p>the value for the inner capturing parentheses (numbered 2) is "ef", which is +the last value taken on at the top level. If a capturing subpattern is not +matched at the top level, its final captured value is unset, even if it was +(temporarily) set at a deeper level during the matching process.</p> -documentation). ---> -If the pattern above is matched against</p> +<p>Do not confuse the (?R) item with the condition (R), which tests for recursion. +Consider this pattern, which matches text in angle brackets, allowing for +arbitrary nesting. Only digits are allowed in nested brackets (that is, when +recursing), whereas any characters are permitted at the outer level.</p> -<quote><p> (ab(cd)ef)</p></quote> +<quote><p> < (?: (?(R) \d++ | [^<>]*+) | (?R)) * ></p></quote> -<p>the value for the capturing parentheses is "ef", which is the last value taken -on at the top level. If additional parentheses are added, giving</p> +<p>In this pattern, (?(R) is the start of a conditional subpattern, with two +different alternatives for the recursive and non-recursive cases. The (?R) item +is the actual recursive call.</p> + +<p><em>Differences in recursion processing between PCRE and Perl</em></p> + +<p>Recursion processing in PCRE differs from Perl in two important ways. In PCRE +(like Python, but unlike Perl), a recursive subpattern call is always treated +as an atomic group. That is, once it has matched some of the subject string, it +is never re-entered, even if it contains untried alternatives and there is a +subsequent matching failure. This can be illustrated by the following pattern, +which purports to match a palindromic string that contains an odd number of +characters (for example, "a", "aba", "abcba", "abcdcba"):</p> + +<quote><p> ^(.|(.)(?1)\2)$</p></quote> + +<p>The idea is that it either matches a single character, or two identical +characters surrounding a sub-palindrome. In Perl, this pattern works; in PCRE +it does not if the pattern is longer than three characters. Consider the +subject string "abcba":</p> + +<p>At the top level, the first character is matched, but as it is not at the end +of the string, the first alternative fails; the second alternative is taken +and the recursion kicks in. The recursive call to subpattern 1 successfully +matches the next character ("b"). (Note that the beginning and end of line +tests are not part of the recursion).</p> + +<p>Back at the top level, the next character ("c") is compared with what +subpattern 2 matched, which was "a". This fails. Because the recursion is +treated as an atomic group, there are now no backtracking points, and so the +entire match fails. (Perl is able, at this point, to re-enter the recursion and +try the second alternative.) However, if the pattern is written with the +alternatives in the other order, things are different:</p> + +<quote><p> ^((.)(?1)\2|.)$</p></quote> + +<p>This time, the recursing alternative is tried first, and continues to recurse +until it runs out of characters, at which point the recursion fails. But this +time we do have another alternative to try at the higher level. That is the big +difference: in the previous case the remaining alternative is at a deeper +recursion level, which PCRE cannot use.</p> + +<p>To change the pattern so that it matches all palindromic strings, not just +those with an odd number of characters, it is tempting to change the pattern to +this:</p> -<code type="none"> - \( ( ( (?>[^()]+) | (?R) )* ) \) - ^ ^ - ^ ^</code> +<quote><p> ^((.)(?1)\2|.?)$</p></quote> -<p>the string they capture is "ab(cd)ef", the contents of the top level -parentheses. -<!-- XXX C interface -If there are more than 15 capturing parentheses in a pattern, PCRE -has to obtain extra memory to store data during a recursion, which it does by -using <em>pcre_malloc</em>, freeing it via <em>pcre_free</em> afterwards. If no -memory can be obtained, the match fails with the <c>error_nomemory</c> error.</p> ---> -</p> +<p>Again, this works in Perl, but not in PCRE, and for the same reason. When a +deeper recursion has matched a single character, it cannot be entered again in +order to match an empty string. The solution is to separate the two cases, and +write out the odd and even cases as alternatives at the higher level:</p> -<p>Do not confuse the (?R) item with the condition (R), which tests -for recursion. Consider this pattern, which matches text in angle -brackets, allowing for arbitrary nesting. Only digits are allowed in -nested brackets (that is, when recursing), whereas any characters are -permitted at the outer level.</p> +<quote><p> ^(?:((.)(?1)\2|)|((.)(?3)\4|.))</p></quote> -<quote><p> < (?: (?(R) \d++ | [^<>]*+) | (?R)) * ></p></quote> +<p>If you want to match typical palindromic phrases, the pattern has to ignore all +non-word characters, which can be done like this:</p> + + <quote><p> ^\W*+(?:((.)\W*+(?1)\W*+\2|)|((.)\W*+(?3)\W*+\4|\W*+.\W*+))\W*+$</p></quote> + +<p>If run with the <c>caseless</c> option, this pattern matches phrases such as "A +man, a plan, a canal: Panama!" and it works well in both PCRE and Perl. Note +the use of the possessive quantifier *+ to avoid backtracking into sequences of +non-word characters. Without this, PCRE takes a great deal longer (ten times or +more) to match typical phrases, and Perl takes so long that you think it has +gone into a loop.</p> + +<p><em>WARNING</em>: The palindrome-matching patterns above work only if the subject +string does not start with a palindrome that is shorter than the entire string. +For example, although "abcba" is correctly matched, if the subject is "ababa", +PCRE finds the palindrome "aba" at the start, then fails at top level because +the end of the string does not follow. Once again, it cannot jump back into the +recursion to try other alternatives, so the entire match fails.</p> -<p>In this pattern, (?(R) is the start of a conditional subpattern, -with two different alternatives for the recursive and non-recursive -cases. The (?R) item is the actual recursive call.</p> +<p>The second way in which PCRE and Perl differ in their recursion processing is +in the handling of captured values. In Perl, when a subpattern is called +recursively or as a subpattern (see the next section), it has no access to any +values that were captured outside the recursion, whereas in PCRE these values +can be referenced. Consider this pattern:</p> + +<quote><p> ^(.)(\1|a(?2))</p></quote> + +<p>In PCRE, this pattern matches "bab". The first capturing parentheses match "b", +then in the second group, when the back reference \1 fails to match "b", the +second alternative matches "a" and then recurses. In the recursion, \1 does +now match "b" and so the whole match succeeds. In Perl, the pattern fails to +match because inside the recursive call \1 cannot access the externally set +value.</p> </section> <section><marker id="sect21"></marker><title>Subpatterns as subroutines</title> -<p>If the syntax for a recursive subpattern reference (either by number or by +<p>If the syntax for a recursive subpattern call (either by number or by name) is used outside the parentheses to which it refers, it operates like a -subroutine in a programming language. The "called" subpattern may be defined +subroutine in a programming language. The called subpattern may be defined before or after the reference. A numbered reference can be absolute or relative, as in these examples:</p> @@ -2708,23 +3279,40 @@ relative, as in these examples:</p> <p>is used, it does match "sense and responsibility" as well as the other two strings. Another example is given in the discussion of DEFINE above.</p> -<p>Like recursive subpatterns, a "subroutine" call is always treated -as an atomic group. That is, once it has matched some of the subject -string, it is never re-entered, even if it contains untried -alternatives and there is a subsequent matching failure.</p> - -<p>When a subpattern is used as a subroutine, processing options such as -case-independence are fixed when the subpattern is defined. They cannot be -changed for different calls. For example, consider this pattern:</p> +<p>All subroutine calls, whether recursive or not, are always treated as atomic +groups. That is, once a subroutine has matched some of the subject string, it +is never re-entered, even if it contains untried alternatives and there is a +subsequent matching failure. Any capturing parentheses that are set during the +subroutine call revert to their previous values afterwards.</p> +<p>Processing options such as case-independence are fixed when a subpattern is +defined, so if it is used as a subroutine, such options cannot be changed for +different calls. For example, consider this pattern:</p> <quote><p> (abc)(?i:(?-1))</p></quote> <p>It matches "abcabc". It does not match "abcABC" because the change of processing option does not affect the called subpattern.</p> - </section> +<section><marker id="sect22"></marker><title>Oniguruma subroutine syntax</title> +<p>For compatibility with Oniguruma, the non-Perl syntax \g followed by a name or +a number enclosed either in angle brackets or single quotes, is an alternative +syntax for referencing a subpattern as a subroutine, possibly recursively. Here +are two of the examples used above, rewritten using this syntax:</p> +<quote> + <p> (?<pn> \( ( (?>[^()]+) | \g<pn> )* \) )</p> + <p> (sens|respons)e and \g'1'ibility</p> +</quote> +<p>PCRE supports an extension to Oniguruma: if a number is preceded by a +plus or a minus sign it is taken as a relative reference. For example:</p> + + <quote><p> (abc)(?i:\g<-1>)</p></quote> + +<p>Note that \g{...} (Perl syntax) and \g<...> (Oniguruma syntax) are <i>not</i> +synonymous. The former is a back reference; the latter is a subroutine call.</p> + +</section> <!-- XXX C interface <section> <marker id="sect22"><title>Callouts</title></marker> @@ -2767,116 +3355,387 @@ documentation.</p> <section><marker id="sect23"></marker><title>Backtracking control</title> <p>Perl 5.10 introduced a number of "Special Backtracking Control Verbs", which -are described in the Perl documentation as "experimental and subject to change -or removal in a future version of Perl". It goes on to say: "Their usage in -production code should be noted to avoid problems during upgrades." The same +are still described in the Perl documentation as "experimental and subject to +change or removal in a future version of Perl". It goes on to say: "Their usage +in production code should be noted to avoid problems during upgrades." The same remarks apply to the PCRE features described in this section.</p> +<p>The new verbs make use of what was previously invalid syntax: an opening +parenthesis followed by an asterisk. They are generally of the form +(*VERB) or (*VERB:NAME). Some may take either form, possibly behaving +differently depending on whether or not a name is present. A name is any +sequence of characters that does not include a closing parenthesis. The maximum +length of name is 255 in the 8-bit library and 65535 in the 16-bit and 32-bit +libraries. If the name is empty, that is, if the closing parenthesis +immediately follows the colon, the effect is as if the colon were not there. +Any number of these verbs may occur in a pattern.</p> + <!-- XXX C interface -<p>Since these verbs are specifically related to backtracking, they can be used -only when the pattern is to be matched using <c>re:run/3</c>, which uses a -backtracking algorithm. They cause an error if encountered by -<c>pcre_dfa_exec()</c>.</p> +<p>Since these verbs are specifically related to backtracking, most of them can be +used only when the pattern is to be matched using one of the traditional +matching functions, because these use a backtracking algorithm. With the +exception of (*FAIL), which behaves like a failing negative assertion, the +backtracking control verbs cause an error if encountered by a DFA matching +function.</p> --> +<p>The behaviour of these verbs in +repeated groups, assertions, +and in subpatterns called as subroutines +(whether or not recursively) is documented below.</p> -<p>The new verbs make use of what was previously invalid syntax: an opening -parenthesis followed by an asterisk. In Perl, they are generally of the form -(*VERB:ARG) but PCRE does not support the use of arguments, so its general -form is just (*VERB). Any number of these verbs may occur in a pattern. There -are two kinds:</p> +<p><em>Optimizations that affect backtracking verbs</em></p> + +<p>PCRE contains some optimizations that are used to speed up matching by running +some checks at the start of each match attempt. For example, it may know the +minimum length of matching subject, or that a particular character must be +present. When one of these optimizations bypasses the running of a match, any +included backtracking verbs will not, of course, be processed. You can suppress +the start-of-match optimizations by setting the <c>no_start_optimize</c> option +when calling <c>re:compile/2</c> or <c>re:run/3</c>, or by starting the +pattern with (*NO_START_OPT).</p> +<p>Experiments with Perl suggest that it too has similar optimizations, sometimes +leading to anomalous results.</p> <p><em>Verbs that act immediately</em></p> -<p>The following verbs act as soon as they are encountered:</p> +<p>The following verbs act as soon as they are encountered. They may not be +followed by a name.</p> -<quote><p> (*ACCEPT)</p></quote> +<quote><p> (*ACCEPT)</p></quote> <p>This verb causes the match to end successfully, skipping the remainder of the -pattern. When inside a recursion, only the innermost pattern is ended -immediately. PCRE differs from Perl in what happens if the (*ACCEPT) is inside -capturing parentheses. In Perl, the data so far is captured: in PCRE no data is -captured. For example:</p> +pattern. However, when it is inside a subpattern that is called as a +subroutine, only that subpattern is ended successfully. Matching then continues +at the outer level. If (*ACCEPT) in triggered in a positive assertion, the +assertion succeeds; in a negative assertion, the assertion fails.</p> + +<p>If (*ACCEPT) is inside capturing parentheses, the data so far is captured. For +example:</p> -<quote><p> A(A|B(*ACCEPT)|C)D</p></quote> +<quote><p> A((?:A|B(*ACCEPT)|C)D)</p></quote> -<p>This matches "AB", "AAD", or "ACD", but when it matches "AB", no data is -captured.</p> +<p>This matches "AB", "AAD", or "ACD"; when it matches "AB", "B" is captured by +the outer parentheses.</p> -<quote><p> (*FAIL) or (*F)</p></quote> +<quote><p> (*FAIL) or (*F)</p></quote> -<p>This verb causes the match to fail, forcing backtracking to occur. It is +<p>This verb causes a matching failure, forcing backtracking to occur. It is equivalent to (?!) but easier to read. The Perl documentation notes that it is probably useful only when combined with (?{}) or (??{}). Those are, of course, Perl features that are not present in PCRE. The nearest equivalent is the callout feature, as for example in this pattern:</p> -<quote><p> a+(?C)(*FAIL)</p></quote> +<quote><p> a+(?C)(*FAIL)</p></quote> <p>A match with the string "aaaa" always fails, but the callout is taken before each backtrack happens (in this example, 10 times).</p> - +<p><em>Recording which path was taken</em></p> + +<p>There is one verb whose main purpose is to track how a match was arrived at, +though it also has a secondary use in conjunction with advancing the match +starting point (see (*SKIP) below).</p> + +<warning> +<p>In Erlang, there is no interface to retrieve a mark with <c>re:run/{2,3]</c>, +so only the secondary purpose is relevant to the Erlang programmer!</p> +<p>The rest of this section is therefore deliberately not adapted for reading +by the Erlang programmer, however the examples might help in understanding NAMES as +they can be used by (*SKIP).</p> +</warning> + +<quote><p> (*MARK:NAME) or (*:NAME)</p></quote> + +<p>A name is always required with this verb. There may be as many instances of +(*MARK) as you like in a pattern, and their names do not have to be unique.</p> + +<p>When a match succeeds, the name of the last-encountered (*MARK:NAME), +(*PRUNE:NAME), or (*THEN:NAME) on the matching path is passed back to the +caller as described in the section entitled "Extra data for <c>pcre_exec()</c>" +in the <c>pcreapi</c> +documentation. Here is an example of <c>pcretest</c> output, where the /K +modifier requests the retrieval and outputting of (*MARK) data:</p> +<code> + re> /X(*MARK:A)Y|X(*MARK:B)Z/K + data> XY + 0: XY + MK: A + XZ + 0: XZ + MK: B</code> + +<p>The (*MARK) name is tagged with "MK:" in this output, and in this example it +indicates which of the two alternatives matched. This is a more efficient way +of obtaining this information than putting each alternative in its own +capturing parentheses.</p> + +<p>If a verb with a name is encountered in a positive assertion that is true, the +name is recorded and passed back if it is the last-encountered. This does not +happen for negative assertions or failing positive assertions.</p> + +<p>After a partial match or a failed match, the last encountered name in the +entire match process is returned. For example:</p> +<code> + re> /X(*MARK:A)Y|X(*MARK:B)Z/K + data> XP + No match, mark = B</code> + +<p>Note that in this unanchored example the mark is retained from the match +attempt that started at the letter "X" in the subject. Subsequent match +attempts starting at "P" and then with an empty string do not get as far as the +(*MARK) item, but nevertheless do not reset it.</p> + +<!-- +<p>If you are interested in (*MARK) values after failed matches, you should +probably set the PCRE_NO_START_OPTIMIZE option +(see above) +to ensure that the match is always attempted.</p> +--> <p><em>Verbs that act after backtracking</em></p> <p>The following verbs do nothing when they are encountered. Matching continues -with what follows, but if there is no subsequent match, a failure is forced. -The verbs differ in exactly what kind of failure occurs.</p> - -<quote><p> (*COMMIT)</p></quote> - -<p>This verb causes the whole match to fail outright if the rest of the pattern -does not match. Even if the pattern is unanchored, no further attempts to find -a match by advancing the start point take place. Once (*COMMIT) has been -passed, <c>re:run/3</c> is committed to finding a match at the current -starting point, or not at all. For example:</p> +with what follows, but if there is no subsequent match, causing a backtrack to +the verb, a failure is forced. That is, backtracking cannot pass to the left of +the verb. However, when one of these verbs appears inside an atomic group or an +assertion that is true, its effect is confined to that group, because once the +group has been matched, there is never any backtracking into it. In this +situation, backtracking can "jump back" to the left of the entire atomic group +or assertion. (Remember also, as stated above, that this localization also +applies in subroutine calls.)</p> + +<p>These verbs differ in exactly what kind of failure occurs when backtracking +reaches them. The behaviour described below is what happens when the verb is +not in a subroutine or an assertion. Subsequent sections cover these special +cases.</p> + +<quote><p> (*COMMIT)</p></quote> + +<p>This verb, which may not be followed by a name, causes the whole match to fail +outright if there is a later matching failure that causes backtracking to reach +it. Even if the pattern is unanchored, no further attempts to find a match by +advancing the starting point take place. If (*COMMIT) is the only backtracking +verb that is encountered, once it has been passed <c>re:run/{2,3}</c> is +committed to finding a match at the current starting point, or not at all. For +example:</p> -<quote><p> a+(*COMMIT)b</p></quote> +<quote><p> a+(*COMMIT)b</p></quote> <p>This matches "xxaab" but not "aacaab". It can be thought of as a kind of -dynamic anchor, or "I've started, so I must finish."</p> +dynamic anchor, or "I've started, so I must finish." The name of the most +recently passed (*MARK) in the path is passed back when (*COMMIT) forces a +match failure.</p> -<quote><p> (*PRUNE)</p></quote> +<p>If there is more than one backtracking verb in a pattern, a different one that +follows (*COMMIT) may be triggered first, so merely passing (*COMMIT) during a +match does not always guarantee that a match must be at this starting point.</p> -<p>This verb causes the match to fail at the current position if the rest of the -pattern does not match. If the pattern is unanchored, the normal "bumpalong" -advance to the next starting character then happens. Backtracking can occur as -usual to the left of (*PRUNE), or when matching to the right of (*PRUNE), but -if there is no match to the right, backtracking cannot cross (*PRUNE). -In simple cases, the use of (*PRUNE) is just an alternative to an atomic -group or possessive quantifier, but there are some uses of (*PRUNE) that cannot -be expressed in any other way.</p> - -<quote><p> (*SKIP)</p></quote> - -<p>This verb is like (*PRUNE), except that if the pattern is unanchored, the -"bumpalong" advance is not to the next character, but to the position in the -subject where (*SKIP) was encountered. (*SKIP) signifies that whatever text -was matched leading up to it cannot be part of a successful match. Consider:</p> - -<quote><p> a+(*SKIP)b</p></quote> +<p>Note that (*COMMIT) at the start of a pattern is not the same as an anchor, +unless PCRE's start-of-match optimizations are turned off, as shown in this + example:</p> +<code type="none"> + 1> re:run("xyzabc","(*COMMIT)abc",[{capture,all,list}]). + {match,["abc"]} + 2> re:run("xyzabc","(*COMMIT)abc",[{capture,all,list},no_start_optimize]). + nomatch</code> + +<p>PCRE knows that any match must start with "a", so the optimization skips along +the subject to "a" before running the first match attempt, which succeeds. When +the optimization is disabled by the <c>no_start_optimize</c> option, the match +starts at "x" and so the (*COMMIT) causes it to fail without trying any other +starting points.</p> + +<quote><p> (*PRUNE) or (*PRUNE:NAME)</p></quote> + +<p>This verb causes the match to fail at the current starting position in the +subject if there is a later matching failure that causes backtracking to reach +it. If the pattern is unanchored, the normal "bumpalong" advance to the next +starting character then happens. Backtracking can occur as usual to the left of +(*PRUNE), before it is reached, or when matching to the right of (*PRUNE), but +if there is no match to the right, backtracking cannot cross (*PRUNE). In +simple cases, the use of (*PRUNE) is just an alternative to an atomic group or +possessive quantifier, but there are some uses of (*PRUNE) that cannot be +expressed in any other way. In an anchored pattern (*PRUNE) has the same effect +as (*COMMIT).</p> + +<p>The behaviour of (*PRUNE:NAME) is the not the same as (*MARK:NAME)(*PRUNE). +It is like (*MARK:NAME) in that the name is remembered for passing back to the +caller. However, (*SKIP:NAME) searches only for names set with (*MARK).</p> + +<warning> +<p>The fact that (*PRUNE:NAME) remembers the name is useless to the Erlang programmer, +as names can not be retrieved.</p> +</warning> + +<quote><p> (*SKIP)</p></quote> + +<p>This verb, when given without a name, is like (*PRUNE), except that if the +pattern is unanchored, the "bumpalong" advance is not to the next character, +but to the position in the subject where (*SKIP) was encountered. (*SKIP) +signifies that whatever text was matched leading up to it cannot be part of a +successful match. Consider:</p> + +<quote><p> a+(*SKIP)b</p></quote> <p>If the subject is "aaaac...", after the first match attempt fails (starting at the first character in the string), the starting point skips on to start the -next attempt at "c". Note that a possessive quantifier does not have the same -effect in this example; although it would suppress backtracking during the +next attempt at "c". Note that a possessive quantifer does not have the same +effect as this example; although it would suppress backtracking during the first match attempt, the second attempt would start at the second character instead of skipping on to "c".</p> -<quote><p> (*THEN)</p></quote> +<quote><p> (*SKIP:NAME)</p></quote> + +<p>When (*SKIP) has an associated name, its behaviour is modified. When it is +triggered, the previous path through the pattern is searched for the most +recent (*MARK) that has the same name. If one is found, the "bumpalong" advance +is to the subject position that corresponds to that (*MARK) instead of to where +(*SKIP) was encountered. If no (*MARK) with a matching name is found, the +(*SKIP) is ignored.</p> -<p>This verb causes a skip to the next alternation if the rest of the pattern does -not match. That is, it cancels pending backtracking, but only within the -current alternation. Its name comes from the observation that it can be used -for a pattern-based if-then-else block:</p> +<p>Note that (*SKIP:NAME) searches only for names set by (*MARK:NAME). It ignores +names that are set by (*PRUNE:NAME) or (*THEN:NAME).</p> -<quote><p> ( COND1 (*THEN) FOO | COND2 (*THEN) BAR | COND3 (*THEN) BAZ ) ...</p></quote> +<quote><p> (*THEN) or (*THEN:NAME)</p></quote> + +<p>This verb causes a skip to the next innermost alternative when backtracking +reaches it. That is, it cancels any further backtracking within the current +alternative. Its name comes from the observation that it can be used for a +pattern-based if-then-else block:</p> + +<quote><p> ( COND1 (*THEN) FOO | COND2 (*THEN) BAR | COND3 (*THEN) BAZ ) ...</p></quote> <p>If the COND1 pattern matches, FOO is tried (and possibly further items after -the end of the group if FOO succeeds); on failure the matcher skips to the -second alternative and tries COND2, without backtracking into COND1. If (*THEN) -is used outside of any alternation, it acts exactly like (*PRUNE).</p> +the end of the group if FOO succeeds); on failure, the matcher skips to the +second alternative and tries COND2, without backtracking into COND1. If that +succeeds and BAR fails, COND3 is tried. If subsequently BAZ fails, there are no +more alternatives, so there is a backtrack to whatever came before the entire +group. If (*THEN) is not inside an alternation, it acts like (*PRUNE).</p> + +<p>The behaviour of (*THEN:NAME) is the not the same as (*MARK:NAME)(*THEN). +It is like (*MARK:NAME) in that the name is remembered for passing back to the +caller. However, (*SKIP:NAME) searches only for names set with (*MARK).</p> + +<warning> +<p>The fact that (*THEN:NAME) remembers the name is useless to the Erlang programmer, +as names can not be retrieved.</p> +</warning> + +<p>A subpattern that does not contain a | character is just a part of the +enclosing alternative; it is not a nested alternation with only one +alternative. The effect of (*THEN) extends beyond such a subpattern to the +enclosing alternative. Consider this pattern, where A, B, etc. are complex +pattern fragments that do not contain any | characters at this level:</p> + +<quote><p> A (B(*THEN)C) | D</p></quote> + +<p>If A and B are matched, but there is a failure in C, matching does not +backtrack into A; instead it moves to the next alternative, that is, D. +However, if the subpattern containing (*THEN) is given an alternative, it +behaves differently:</p> + +<quote><p> A (B(*THEN)C | (*FAIL)) | D</p></quote> + +<p>The effect of (*THEN) is now confined to the inner subpattern. After a failure +in C, matching moves to (*FAIL), which causes the whole subpattern to fail +because there are no more alternatives to try. In this case, matching does now +backtrack into A.</p> + +<p>Note that a conditional subpattern is not considered as having two +alternatives, because only one is ever used. In other words, the | character in +a conditional subpattern has a different meaning. Ignoring white space, +consider:</p> + +<quote><p> ^.*? (?(?=a) a | b(*THEN)c )</p></quote> + +<p>If the subject is "ba", this pattern does not match. Because .*? is ungreedy, +it initially matches zero characters. The condition (?=a) then fails, the +character "b" is matched, but "c" is not. At this point, matching does not +backtrack to .*? as might perhaps be expected from the presence of the | +character. The conditional subpattern is part of the single alternative that +comprises the whole pattern, and so the match fails. (If there was a backtrack +into .*?, allowing it to match "b", the match would succeed.)</p> + +<p>The verbs just described provide four different "strengths" of control when +subsequent matching fails. (*THEN) is the weakest, carrying on the match at the +next alternative. (*PRUNE) comes next, failing the match at the current +starting position, but allowing an advance to the next character (for an +unanchored pattern). (*SKIP) is similar, except that the advance may be more +than one character. (*COMMIT) is the strongest, causing the entire match to +fail.</p> + + +<p><em>More than one backtracking verb</em></p> + +<p>If more than one backtracking verb is present in a pattern, the one that is +backtracked onto first acts. For example, consider this pattern, where A, B, +etc. are complex pattern fragments:</p> + +<quote><p> (A(*COMMIT)B(*THEN)C|ABD)</p></quote> + +<p>If A matches but B fails, the backtrack to (*COMMIT) causes the entire match to +fail. However, if A and B match, but C fails, the backtrack to (*THEN) causes +the next alternative (ABD) to be tried. This behaviour is consistent, but is +not always the same as Perl's. It means that if two or more backtracking verbs +appear in succession, all the the last of them has no effect. Consider this +example:</p> + +<quote><p> ...(*COMMIT)(*PRUNE)...</p></quote> + +<p>If there is a matching failure to the right, backtracking onto (*PRUNE) cases +it to be triggered, and its action is taken. There can never be a backtrack +onto (*COMMIT).</p> + +<p><em>Backtracking verbs in repeated groups</em></p> + +<p>PCRE differs from Perl in its handling of backtracking verbs in repeated +groups. For example, consider:</p> + +<quote><p> /(a(*COMMIT)b)+ac/</p></quote> + +<p>If the subject is "abac", Perl matches, but PCRE fails because the (*COMMIT) in +the second repeat of the group acts.</p> + +<p><em>Backtracking verbs in assertions</em></p> + +<p>(*FAIL) in an assertion has its normal effect: it forces an immediate backtrack.</p> + +<p>(*ACCEPT) in a positive assertion causes the assertion to succeed without any +further processing. In a negative assertion, (*ACCEPT) causes the assertion to +fail without any further processing.</p> + +<p>The other backtracking verbs are not treated specially if they appear in a +positive assertion. In particular, (*THEN) skips to the next alternative in the +innermost enclosing group that has alternations, whether or not this is within +the assertion.</p> + +<p>Negative assertions are, however, different, in order to ensure that changing a +positive assertion into a negative assertion changes its result. Backtracking +into (*COMMIT), (*SKIP), or (*PRUNE) causes a negative assertion to be true, +without considering any further alternative branches in the assertion. +Backtracking into (*THEN) causes it to skip to the next enclosing alternative +within the assertion (the normal behaviour), but if the assertion does not have +such an alternative, (*THEN) behaves like (*PRUNE).</p> + +<p><em>Backtracking verbs in subroutines</em></p> + +<p>These behaviours occur whether or not the subpattern is called recursively. +Perl's treatment of subroutines is different in some cases.</p> + +<p>(*FAIL) in a subpattern called as a subroutine has its normal effect: it forces +an immediate backtrack.</p> + +<p>(*ACCEPT) in a subpattern called as a subroutine causes the subroutine match to +succeed without any further processing. Matching then continues after the +subroutine call.</p> + +<p>(*COMMIT), (*SKIP), and (*PRUNE) in a subpattern called as a subroutine cause +the subroutine match to fail.</p> + +<p>(*THEN) skips to the next alternative in the innermost enclosing group within +the subpattern that has alternatives. If there is no such group within the +subpattern, (*THEN) causes the subroutine match to fail.</p> </section> diff --git a/lib/stdlib/doc/src/ref_man.xml b/lib/stdlib/doc/src/ref_man.xml index 0f277f6c5e..6c35578bdf 100644 --- a/lib/stdlib/doc/src/ref_man.xml +++ b/lib/stdlib/doc/src/ref_man.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE application SYSTEM "application.dtd"> <application xmlns:xi="http://www.w3.org/2001/XInclude"> <header> <copyright> - <year>1996</year><year>2011</year> + <year>1996</year><year>2013</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -68,6 +68,7 @@ <xi:include href="lib.xml"/> <xi:include href="lists.xml"/> <xi:include href="log_mf_h.xml"/> + <xi:include href="maps.xml"/> <xi:include href="math.xml"/> <xi:include href="ms_transform.xml"/> <xi:include href="orddict.xml"/> diff --git a/lib/stdlib/doc/src/sets.xml b/lib/stdlib/doc/src/sets.xml index 071ee437cb..c5b8dce4b7 100644 --- a/lib/stdlib/doc/src/sets.xml +++ b/lib/stdlib/doc/src/sets.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>2000</year><year>2011</year> + <year>2000</year><year>2014</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -45,9 +45,15 @@ <datatypes> <datatype> - <name><marker id="type-dict">set()</marker></name> + <name name="set" n_vars="1"/> <desc><p>As returned by <c>new/0</c>.</p></desc> </datatype> + <datatype> + <name name="set" n_vars="0"/> + <desc> + <p><c>set()</c> is equivalent to <c>set(term())</c>.</p> + </desc> + </datatype> </datatypes> <funcs> <func> diff --git a/lib/stdlib/doc/src/shell.xml b/lib/stdlib/doc/src/shell.xml index 7f251c863e..3ca80ed900 100644 --- a/lib/stdlib/doc/src/shell.xml +++ b/lib/stdlib/doc/src/shell.xml @@ -1,4 +1,4 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> diff --git a/lib/stdlib/doc/src/shell_default.xml b/lib/stdlib/doc/src/shell_default.xml index f7e7d5388a..2355ba92f9 100644 --- a/lib/stdlib/doc/src/shell_default.xml +++ b/lib/stdlib/doc/src/shell_default.xml @@ -1,11 +1,11 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> <year>1996</year> - <year>2011</year> + <year>2013</year> <holder>Ericsson AB, All Rights Reserved</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/slave.xml b/lib/stdlib/doc/src/slave.xml index 15b6711731..f5d0436a20 100644 --- a/lib/stdlib/doc/src/slave.xml +++ b/lib/stdlib/doc/src/slave.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>1996</year><year>2011</year> + <year>1996</year><year>2013</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/sofs.xml b/lib/stdlib/doc/src/sofs.xml index 37c41501ae..6c97fd0bc0 100644 --- a/lib/stdlib/doc/src/sofs.xml +++ b/lib/stdlib/doc/src/sofs.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>2001</year><year>2012</year> + <year>2001</year><year>2013</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/specs.xml b/lib/stdlib/doc/src/specs.xml index 49c60529d2..60a04ed5e7 100644 --- a/lib/stdlib/doc/src/specs.xml +++ b/lib/stdlib/doc/src/specs.xml @@ -1,4 +1,4 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <specs xmlns:xi="http://www.w3.org/2001/XInclude"> <xi:include href="../specs/specs_array.xml"/> <xi:include href="../specs/specs_base64.xml"/> @@ -34,6 +34,7 @@ <xi:include href="../specs/specs_lib.xml"/> <xi:include href="../specs/specs_lists.xml"/> <xi:include href="../specs/specs_log_mf_h.xml"/> + <xi:include href="../specs/specs_maps.xml"/> <xi:include href="../specs/specs_math.xml"/> <xi:include href="../specs/specs_ms_transform.xml"/> <xi:include href="../specs/specs_orddict.xml"/> diff --git a/lib/stdlib/doc/src/stdlib_app.xml b/lib/stdlib/doc/src/stdlib_app.xml index 2391bb6f03..de4cc65396 100644 --- a/lib/stdlib/doc/src/stdlib_app.xml +++ b/lib/stdlib/doc/src/stdlib_app.xml @@ -1,4 +1,4 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE appref SYSTEM "appref.dtd"> <appref> diff --git a/lib/stdlib/doc/src/string.xml b/lib/stdlib/doc/src/string.xml index 549c871aed..b05d5cbc08 100644 --- a/lib/stdlib/doc/src/string.xml +++ b/lib/stdlib/doc/src/string.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>1996</year><year>2012</year> + <year>1996</year><year>2014</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -124,6 +124,10 @@ <code type="none"> > tokens("abc defxxghix jkl", "x "). ["abc", "def", "ghi", "jkl"] </code> + <p>Note that, as shown in the example above, two or more + adjacent separator characters in <c><anno>String</anno></c> + will be treated as one. That is, there will not be any empty + strings in the resulting list of tokens.</p> </desc> </func> <func> diff --git a/lib/stdlib/doc/src/supervisor.xml b/lib/stdlib/doc/src/supervisor.xml index e2c9c14e6a..3a5027d595 100644 --- a/lib/stdlib/doc/src/supervisor.xml +++ b/lib/stdlib/doc/src/supervisor.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>1996</year><year>2013</year> + <year>1996</year><year>2014</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -262,12 +262,12 @@ child_spec() = {Id,StartFunc,Restart,Shutdown,Type,Modules} locally as <c>Name</c> using <c>register/2</c>. If <c><anno>SupName</anno>={global,Name}</c> the supervisor is registered globally as <c>Name</c> using <c>global:register_name/2</c>. If - <c><anno>SupName</anno>={via,Module,Name}</c> the supervisor + <c><anno>SupName</anno>={via,<anno>Module</anno>,<anno>Name</anno>}</c> the supervisor is registered as <c>Name</c> using the registry represented by <c>Module</c>. The <c>Module</c> callback should export the functions <c>register_name/2</c>, <c>unregister_name/1</c> and <c>send/2</c>, which should behave like the corresponding functions in <c>global</c>. - Thus, <c>{via,global,Name}</c> is a valid reference.</p> + Thus, <c>{via,global,<anno>Name</anno>}</c> is a valid reference.</p> <p>If no name is provided, the supervisor is not registered.</p> <p><c><anno>Module</anno></c> is the name of the callback module.</p> <p><c><anno>Args</anno></c> is an arbitrary term which is passed as diff --git a/lib/stdlib/doc/src/supervisor_bridge.xml b/lib/stdlib/doc/src/supervisor_bridge.xml index f6712d6c1d..d16b258b6c 100644 --- a/lib/stdlib/doc/src/supervisor_bridge.xml +++ b/lib/stdlib/doc/src/supervisor_bridge.xml @@ -1,11 +1,11 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> <year>1996</year> - <year>2011</year> + <year>2013</year> <holder>Ericsson AB, All Rights Reserved</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/sys.xml b/lib/stdlib/doc/src/sys.xml index b66a6b17bd..19605f325b 100644 --- a/lib/stdlib/doc/src/sys.xml +++ b/lib/stdlib/doc/src/sys.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>1996</year><year>2013</year> + <year>1996</year><year>2014</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -115,6 +115,9 @@ <datatype> <name name="dbg_fun"/> </datatype> + <datatype> + <name name="format_fun"/> + </datatype> </datatypes> <funcs> <func> @@ -246,6 +249,22 @@ <c>{Module, Id, HandlerState}</c>, where <c>Module</c> is the event handler's module name, <c>Id</c> is the handler's ID (which is the value <c>false</c> if it was registered without an ID), and <c>HandlerState</c> is the handler's state.</p> + <p>If the callback module exports a <c>system_get_state/1</c> function, it will be called in the + target process to get its state. Its argument is the same as the <c>Misc</c> value returned by + <seealso marker="#get_status-1">get_status/1,2</seealso>, and the <c>system_get_state/1</c> + function is expected to extract the callback module's state from it. The <c>system_get_state/1</c> + function must return <c>{ok, State}</c> where <c>State</c> is the callback module's state.</p> + <p>If the callback module does not export a <c>system_get_state/1</c> function, <c>get_state/1,2</c> + assumes the <c>Misc</c> value is the callback module's state and returns it directly instead.</p> + <p>If the callback module's <c>system_get_state/1</c> function crashes or throws an exception, the + caller exits with error <c>{callback_failed, {Module, system_get_state}, {Class, Reason}}</c> where + <c>Module</c> is the name of the callback module and <c>Class</c> and <c>Reason</c> indicate + details of the exception.</p> + <p>The <c>system_get_state/1</c> function is primarily useful for user-defined + behaviours and modules that implement OTP <seealso marker="#special_process">special + processes</seealso>. The <c>gen_server</c>, <c>gen_fsm</c>, and <c>gen_event</c> OTP + behaviour modules export this function, and so callback modules for those behaviours + need not supply their own.</p> <p>To obtain more information about a process, including its state, see <seealso marker="#get_status-1">get_status/1</seealso> and <seealso marker="#get_status-2">get_status/2</seealso>.</p> @@ -289,6 +308,28 @@ function means that only the state of the particular event handler it was working on when it failed or crashed is unchanged; it can still succeed in changing the states of other event handlers registered in the same <c>gen_event</c> process.</p> + <p>If the callback module exports a <c>system_replace_state/2</c> function, it will be called in the + target process to replace its state using <c>StateFun</c>. Its two arguments are <c>StateFun</c> + and <c>Misc</c>, where <c>Misc</c> is the same as the <c>Misc</c> value returned by + <seealso marker="#get_status-1">get_status/1,2</seealso>. A <c>system_replace_state/2</c> function + is expected to return <c>{ok, NewState, NewMisc}</c> where <c>NewState</c> is the callback module's + new state obtained by calling <c>StateFun</c>, and <c>NewMisc</c> is a possibly new value used to + replace the original <c>Misc</c> (required since <c>Misc</c> often contains the callback + module's state within it).</p> + <p>If the callback module does not export a <c>system_replace_state/2</c> function, + <c>replace_state/2,3</c> assumes the <c>Misc</c> value is the callback module's state, passes it + to <c>StateFun</c> and uses the return value as both the new state and as the new value of + <c>Misc</c>.</p> + <p>If the callback module's <c>system_replace_state/2</c> function crashes or throws an exception, + the caller exits with error <c>{callback_failed, {Module, system_replace_state}, {Class, Reason}}</c> + where <c>Module</c> is the name of the callback module and <c>Class</c> and <c>Reason</c> indicate details + of the exception. If the callback module does not provide a <c>system_replace_state/2</c> function and + <c>StateFun</c> crashes or throws an exception, the caller exits with error + <c>{callback_failed, StateFun, {Class, Reason}}</c>.</p> + <p>The <c>system_replace_state/2</c> function is primarily useful for user-defined behaviours and + modules that implement OTP <seealso marker="#special_process">special processes</seealso>. The + <c>gen_server</c>, <c>gen_fsm</c>, and <c>gen_event</c> OTP behaviour modules export this function, + and so callback modules for those behaviours need not supply their own.</p> </desc> </func> <func> @@ -322,7 +363,7 @@ <section> <title>Process Implementation Functions</title> - <p>The following functions are used when implementing a + <p><marker id="special_process"/>The following functions are used when implementing a special process. This is an ordinary process which does not use a standard behaviour, but a process which understands the standard system messages.</p> </section> @@ -375,8 +416,9 @@ process continues the execution, or <c><anno>Module</anno>:system_terminate(Reason, <anno>Parent</anno>, <anno>Debug</anno>, <anno>Misc</anno>)</c> if the process should terminate. The <c><anno>Module</anno></c> must export - <c>system_continue/3</c>, <c>system_terminate/4</c>, and - <c>system_code_change/4</c> (see below). + <c>system_continue/3</c>, <c>system_terminate/4</c>, + <c>system_code_change/4</c>, <c>system_get_state/1</c> and + <c>system_replace_state/2</c> (see below). </p> <p>The <c><anno>Misc</anno></c> argument can be used to save internal data in a process, for example its state. It is sent to @@ -444,6 +486,34 @@ defined, the atom <c>undefined</c> is sent.</p> </desc> </func> + <func> + <name>Mod:system_get_state(Misc) -> {ok, State}</name> + <fsummary>Called when the process should return its current state</fsummary> + <type> + <v>Misc = term()</v> + <v>State = term()</v> + </type> + <desc> + <p>This function is called from <c>sys:handle_system_msg/6</c> when the process + should return a term that reflects its current state. <c>State</c> is the + value returned by <c>sys:get_state/2</c>.</p> + </desc> + </func> + <func> + <name>Mod:system_replace_state(StateFun, Misc) -> {ok, NState, NMisc}</name> + <fsummary>Called when the process should replace its current state</fsummary> + <type> + <v>StateFun = fun((State :: term()) -> NState)</v> + <v>Misc = term()</v> + <v>NState = term()</v> + <v>NMisc = term()</v> + </type> + <desc> + <p>This function is called from <c>sys:handle_system_msg/6</c> when the process + should replace its current state. <c>NState</c> is the value returned by + <c>sys:replace_state/3</c>.</p> + </desc> + </func> </funcs> </erlref> diff --git a/lib/stdlib/doc/src/timer.xml b/lib/stdlib/doc/src/timer.xml index 0c1e398dc4..eca9a72d36 100644 --- a/lib/stdlib/doc/src/timer.xml +++ b/lib/stdlib/doc/src/timer.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>1996</year><year>2011</year> + <year>1996</year><year>2013</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/unicode.xml b/lib/stdlib/doc/src/unicode.xml index deba6adb11..6f8a289432 100644 --- a/lib/stdlib/doc/src/unicode.xml +++ b/lib/stdlib/doc/src/unicode.xml @@ -1,4 +1,4 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> diff --git a/lib/stdlib/doc/src/unicode_usage.xml b/lib/stdlib/doc/src/unicode_usage.xml index 1f64b38554..29b8940c62 100644 --- a/lib/stdlib/doc/src/unicode_usage.xml +++ b/lib/stdlib/doc/src/unicode_usage.xml @@ -1,11 +1,11 @@ -<?xml version="1.0" encoding="utf8" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE chapter SYSTEM "chapter.dtd"> <chapter> <header> <copyright> <year>1999</year> - <year>2013</year> + <year>2014</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -41,21 +41,17 @@ future.</p> <p>The functionality described in EEP10 was implemented in Erlang/OTP - as of R13A, but that was by no means the end of it. In R14B01 support + R13A, but that was by no means the end of it. In Erlang/OTP R14B01 support for Unicode file names was added, although it was in no way complete and was by default disabled on platforms where no guarantee was given - for the file name encoding. With R16A came support for UTF-8 encoded + for the file name encoding. With Erlang/OTP R16A came support for UTF-8 encoded source code, among with enhancements to many of the applications to support both Unicode encoded file names as well as support for UTF-8 encoded files in several circumstances. Most notable is the support for UTF-8 in files read by <c>file:consult/1</c>, release handler support for UTF-8 and more support for Unicode character sets in the - I/O-system.</p> - - <p>In R17, the encoding default for Erlang source files will be - switched to UTF-8 and in R18 Erlang will support atoms in the full - Unicode range, meaning full Unicode function and module - names</p> + I/O-system. In Erlang/OTP 17.0, the encoding default for Erlang source files was + switched to UTF-8.</p> <p>This guide outlines the current Unicode support and gives a couple of recipes for working with Unicode data.</p> @@ -222,7 +218,7 @@ <tag>Representation</tag> <item>To handle Unicode characters in Erlang, we have to have a common representation both in lists and binaries. The EEP (10) and - the subsequent initial implementation in R13A settled a standard + the subsequent initial implementation in Erlang/OTP R13A settled a standard representation of Unicode characters in Erlang.</item> <tag>Manipulation</tag> <item>The Unicode characters need to be processed by the Erlang @@ -274,9 +270,9 @@ (<c>+fnu</c>) on platforms where this is not the default.</item> <tag>Source code encoding</tag> <item>When it comes to the Erlang source code, there is support - for the UTF-8 encoding and bytewise encoding. The default in R16B - is bytewise (or latin1) encoding. You can control the encoding by - a comment like: + for the UTF-8 encoding and bytewise encoding. The default in + Erlang/OTP R16B was bytewise (or latin1) encoding; in Erlang/OTP 17.0 + it was changed to UTF-8. You can control the encoding by a comment like: <code> %% -*- coding: utf-8 -*- </code> @@ -289,8 +285,8 @@ <tag>The language</tag> <item>Having the source code in UTF-8 also allows you to write string literals containing Unicode characters with code points > - 255, although atoms, module names and function names will be - restricted to the ISO-Latin-1 range until the R18 release. Binary + 255, although atoms, module names and function names are + restricted to the ISO-Latin-1 range. Binary literals where you use the <c>/utf8</c> type, can also be expressed using Unicode characters > 255. Having module names using characters other than 7-bit ASCII can cause trouble on @@ -304,7 +300,7 @@ <section> <title>Standard Unicode Representation</title> <p>In Erlang, strings are actually lists of integers. A string was - up until R13 defined to be encoded in the ISO-latin-1 (ISO8859-1) + up until Erlang/OTP R13 defined to be encoded in the ISO-latin-1 (ISO8859-1) character set, which is, code point by code point, a sub-range of the Unicode character set.</p> <p>The standard list encoding for strings was therefore easily @@ -321,7 +317,7 @@ encoding has to be decided upon and the string should be converted to a binary in the preferred encoding using <c>unicode:characters_to_binary/{1,2,3}</c>. Strings are not - generally lists of bytes, as they were before R13. They are lists of + generally lists of bytes, as they were before Erlang/OTP R13. They are lists of characters. Characters are not generally bytes, they are Unicode code points.</p> @@ -385,8 +381,7 @@ external_charlist() = maybe_improper_list(char() | using characters from the ISO-latin-1 character set and atoms are restricted to the same ISO-latin-1 range. These restrictions in the language are of course independent of the encoding of the source - file. Erlang/OTP R18 is expected to handle functions named in - Unicode as well as Unicode atoms.</p> + file.</p> <section> <title>Bit-syntax</title> <p>The bit-syntax contains types for coping with binary data in the @@ -447,8 +442,8 @@ Bin4 = <<"Hello"/utf16>>,</code> probably will not appreciate). Another way is to keep it backwards compatible so that only the ISO-Latin-1 character set is used to detect a string. A third way would be to let the user decide - exactly what Unicode ranges are to be viewed as characters. In - R16B you can select either the whole Unicode range or the + exactly what Unicode ranges are to be viewed as characters. Since + Erlang/OTP R16B you can select either the whole Unicode range or the ISO-Latin-1 range by supplying the startup flag <c>+pc </c><i>Range</i>, where <i>Range</i> is either <c>latin1</c> or <c>unicode</c>. For backwards compatibility, the default is @@ -662,11 +657,14 @@ Eshell V5.10.1 (abort with ^G) containing characters having code points between 128 and 255 may be named either as plain ISO-latin-1 or using UTF-8 encoding. As no consistency is enforced, the Erlang VM can do no consistent - translation of all file names. If the VM would automatically - select encoding based on heuristics, one could get unexpected - behavior on these systems. By default, Erlang starts in "latin1" - file name mode on such systems, meaning bytewise encoding in file - names. This allows for list representation of all file names in + translation of all file names.</p> + + <p>By default on such systems, Erlang starts in <c>utf8</c> file + name mode if the terminal supports UTF-8, otherwise in + <c>latin1</c> mode.</p> + + <p>In the <c>latin1</c> mode, file names are bytewise endcoded. + This allows for list representation of all file names in the system, but, for example, a file named "Östersund.txt", will appear in <c>file:list_dir/1</c> as either "Östersund.txt" (if the file name was encoded in bytewise ISO-Latin-1 by the program @@ -682,7 +680,7 @@ Eshell V5.10.1 (abort with ^G) </item> </taglist> - <p>The Unicode file naming support was introduced with OTP release + <p>The Unicode file naming support was introduced with Erlang/OTP R14B01. A VM operating in Unicode file name translation mode can work with files having names in any language or character set (as long as it is supported by the underlying OS and file system). The @@ -706,7 +704,7 @@ Eshell V5.10.1 (abort with ^G) problem even if it uses transparent file naming. Very few systems have mixed file name encodings. A consistent UTF-8 named system will work perfectly in Unicode file name mode. It was still however - considered experimental in R14B01 and is still not the default on + considered experimental in Erlang/OTP R14B01 and is still not the default on such systems. Unicode file name translation is turned on with the <c>+fnu</c> switch to the On Linux, a VM started without explicitly stating the file name translation mode will default to <c>latin1</c> @@ -752,9 +750,9 @@ Eshell V5.10.1 (abort with ^G) <section> <title>Notes About Raw File Names</title> - + <marker id="notes-about-raw-filenames"/> <p>Raw file names were introduced together with Unicode file name - support in erts-5.8.2 (OTP R14B01). The reason "raw file + support in erts-5.8.2 (Erlang/OTP R14B01). The reason "raw file names" was introduced in the system was to be able to consistently represent file names given in different encodings on the same system. Having the VM automatically translate a file name @@ -795,10 +793,10 @@ Eshell V5.10.1 (abort with ^G) the argument as a binary.</p> <p>To force Unicode file name translation mode on systems where this - is not the default was considered experimental in OTP R14B01 due to + is not the default was considered experimental in Erlang/OTP R14B01 due to the fact that the initial implementation did not ignore wrongly encoded file names, so that raw file names could spread unexpectedly - throughout the system. Beginning with R16B, the wrongly encoded file + throughout the system. Beginning with Erlang/OTP R16B, the wrongly encoded file names are only retrieved by special functions (e.g. <c>file:list_dir_all/1</c>), so the impact on existing code is much lower, why it is now supported. Unicode file name translation @@ -845,6 +843,7 @@ Eshell V5.10.1 (abort with ^G) </section> <section> <title>Unicode in Environment and Parameters</title> + <marker id="unicode_in_environment_and_parameters"/> <p>Environment variables and their interpretation is handled much in the same way as file names. If Unicode file names are enabled, environment variables as well as parameters to the Erlang VM are @@ -993,7 +992,8 @@ ok </pre> </section> <section> - <title><marker id="unicode_options_summary"/>Summary of Options</title> + <title>Summary of Options</title> + <marker id="unicode_options_summary"/> <p>The Unicode support is controlled by both command line switches, some standard environment variables and the version of OTP you are using. Most options affect mainly the way Unicode data is displayed, @@ -1014,7 +1014,8 @@ ok allowed. This setting should correspond to the actual terminal you are using.</p> <p>The environment can also affect file name interpretation, if - Erlang is started with the <c>+fna</c> flag.</p> + Erlang is started with the <c>+fna</c> flag (which is default from + Erlang/OTP 17.0).</p> <p>You can check the setting of this by calling <c>io:getopts()</c>, which will give you an option list containing <c>{encoding,unicode}</c> or @@ -1028,7 +1029,7 @@ ok <c>io</c>/<c>io_lib:format</c> with the <c>"~tp"</c> and <c>~tP</c> formatting instructions, as described above.</p> <p>You can check this option by calling io:printable_range/0, - which in R16B will return <c>unicode</c> or <c>latin1</c>. To be + which will return <c>unicode</c> or <c>latin1</c>. To be compatible with future (expected) extensions to the settings, one should rather use <c>io_lib:printable_list/1</c> to check if a list is printable according to the setting. That function will @@ -1046,8 +1047,7 @@ ok > 255.</p> <p><c>+fnl</c> means bytewise interpretation of file names, which was the usual way to represent ISO-Latin-1 file names before - UTF-8 file naming got widespread. This is the default on all - Unix-like operating systems except MacOS X.</p> + UTF-8 file naming got widespread.</p> <p><c>+fnu</c> means that file names are encoded in UTF-8, which is nowadays the common scheme (although not enforced).</p> <p><c>+fna</c> means that you automatically select between @@ -1055,8 +1055,8 @@ ok <c>LC_CTYPE</c> environment variables. This is optimistic heuristics indeed, nothing enforces a user to have a terminal with the same encoding as the file system, but usually, this is - the case. This might be the default behavior in a future - release.</p> + the case. This is the default on all Unix-like operating + systems except MacOS X.</p> <p>The file name translation mode can be read with the <c>file:native_name_encoding/0</c> function, which returns @@ -1067,8 +1067,8 @@ ok <item> <p>This function returns the default encoding for Erlang source files (if no encoding comment is present) in the currently - running release. For R16 this returns <c>latin1</c> (meaning - bytewise encoding). In R17 and forward it is expected to return + running release. In Erlang/OTP R16B <c>latin1</c> was returned (meaning + bytewise encoding). In Erlang/OTP 17.0 and forward it returns <c>utf8</c>.</p> <p>The encoding of each file can be specified using comments as described in diff --git a/lib/stdlib/doc/src/win32reg.xml b/lib/stdlib/doc/src/win32reg.xml index 99fd7fdeb6..8835f931b2 100644 --- a/lib/stdlib/doc/src/win32reg.xml +++ b/lib/stdlib/doc/src/win32reg.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>2000</year><year>2011</year> + <year>2000</year><year>2013</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> diff --git a/lib/stdlib/doc/src/zip.xml b/lib/stdlib/doc/src/zip.xml index 484bf0e080..48b376743d 100644 --- a/lib/stdlib/doc/src/zip.xml +++ b/lib/stdlib/doc/src/zip.xml @@ -1,4 +1,4 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> @@ -123,6 +123,18 @@ </taglist> </desc> </datatype> + <datatype> + <name name="filename"/> + <p>The name of a zip file.</p> + </datatype> + <datatype><name name="extension"/></datatype> + <datatype><name name="extension_spec"/></datatype> + <datatype> + <name name="create_option"/> + <desc> + <p>These options are described in <seealso marker="#zip_options">create/3</seealso>.</p> + </desc> + </datatype> </datatypes> <funcs> <func> @@ -160,6 +172,7 @@ set to <c>["gif", "jpg"]</c> and <c>uncompress</c> is set to <c>["jpg"]</c>, only files with <c>"gif"</c> as extension will be compressed. No other files will be compressed.</p> + <marker id="zip_options"></marker> <p>The following options are available:</p> <taglist> <tag><c>cooked</c></tag> |