diff options
Diffstat (limited to 'lib/stdlib/doc')
26 files changed, 1874 insertions, 225 deletions
diff --git a/lib/stdlib/doc/src/Makefile b/lib/stdlib/doc/src/Makefile index 13b9b2ff18..b558697d63 100644 --- a/lib/stdlib/doc/src/Makefile +++ b/lib/stdlib/doc/src/Makefile @@ -1,19 +1,19 @@ # # %CopyrightBegin% -# -# Copyright Ericsson AB 1997-2009. All Rights Reserved. -# +# +# Copyright Ericsson AB 1997-2010. All Rights Reserved. +# # The contents of this file are subject to the Erlang Public License, # Version 1.1, (the "License"); you may not use this file except in # compliance with the License. You should have received a copy of the # Erlang Public License along with this software. If not, it can be # retrieved online at http://www.erlang.org/. -# +# # Software distributed under the License is distributed on an "AS IS" # basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See # the License for the specific language governing rights and limitations # under the License. -# +# # %CopyrightEnd% # include $(ERL_TOP)/make/target.mk @@ -40,6 +40,7 @@ XML_REF3_FILES = \ array.xml \ base64.xml \ beam_lib.xml \ + binary.xml \ c.xml \ calendar.xml \ dets.xml \ diff --git a/lib/stdlib/doc/src/beam_lib.xml b/lib/stdlib/doc/src/beam_lib.xml index b9286f1402..adc411e272 100644 --- a/lib/stdlib/doc/src/beam_lib.xml +++ b/lib/stdlib/doc/src/beam_lib.xml @@ -341,15 +341,17 @@ chunkref() = chunkname() | chunkid()</code> <v>Beam1 = Beam2 = beam()</v> <v>Reason = {modules_different, Module1, Module2}</v> <v> | {chunks_different, ChunkId}</v> + <v> | different_chunks</v> <v> | Reason1 -- see info/1</v> <v> Module1 = Module2 = atom()</v> <v> ChunkId = chunkid()</v> </type> <desc> <p>Compares the contents of two BEAM files. If the module names - are the same, and the chunks with the identifiers - <c>"Code"</c>, <c>"ExpT"</c>, <c>"ImpT"</c>, <c>"StrT"</c>, - and <c>"Atom"</c> have the same contents in both files, + are the same, and all chunks except for the <c>"CInf"</c> chunk + (the chunk containing the compilation information which is + returned by <c>Module:module_info(compile)</c>) + have the same contents in both files, <c>ok</c> is returned. Otherwise an error message is returned.</p> </desc> </func> diff --git a/lib/stdlib/doc/src/binary.xml b/lib/stdlib/doc/src/binary.xml new file mode 100644 index 0000000000..c5eb81a86a --- /dev/null +++ b/lib/stdlib/doc/src/binary.xml @@ -0,0 +1,729 @@ +<?xml version="1.0" encoding="latin1" ?> +<!DOCTYPE erlref SYSTEM "erlref.dtd"> + +<erlref> + <header> + <copyright> + <year>2009</year> + <year>2010</year> + <holder>Ericsson AB, All Rights Reserved</holder> + </copyright> + <legalnotice> + The contents of this file are subject to the Erlang Public License, + Version 1.1, (the "License"); you may not use this file except in + compliance with the License. You should have received a copy of the + Erlang Public License along with this software. If not, it can be + retrieved on line at http://www.erlang.org/. + + Software distributed under the License is distributed on an "AS IS" + basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + the License for the specific language governing rights and limitations + under the License. + + The Initial Developer of the Original Code is Ericsson AB. + </legalnotice> + + <title>binary</title> + <prepared>Patrik Nyblom</prepared> + <responsible>Kenneth Lundin</responsible> + <docno>1</docno> + <approved></approved> + <checked></checked> + <date>2010-05-05</date> + <rev>A</rev> + <file>binary.xml</file> + </header> + <module>binary</module> + <modulesummary>Library for handling binary data</modulesummary> + <description> + + <p>This module contains functions for manipulating byte-oriented + binaries. Although the majority of functions could be implemented + using bit-syntax, the functions in this library are highly + optimized and are expected to either execute faster or consume + less memory (or both) than a counterpart written in pure Erlang.</p> + + <p>The module is implemented according to the EEP (Erlang Enhancement Proposal) 31.</p> + + <note> + <p> + The library handles byte-oriented data. Bitstrings that are not + binaries (does not contain whole octets of bits) will result in a <c>badarg</c> + exception being thrown from any of the functions in this + module. + </p> + </note> + + + </description> + <section> + <title>DATA TYPES</title> + <code type="none"> + cp() + - Opaque data-type representing a compiled search-pattern. Guaranteed to be a tuple() + to allow programs to distinguish it from non precompiled search patterns. + </code> + <code type="none"> + part() = {Start,Length} + Start = int() + Length = int() + - A representaion of a part (or range) in a binary. Start is a + zero-based offset into a binary() and Length is the length of + that part. As input to functions in this module, a reverse + part specification is allowed, constructed with a negative + Length, so that the part of the binary begins at Start + + Length and is -Length long. This is useful for referencing the + last N bytes of a binary as {size(Binary), -N}. The functions + in this module always return part()'s with positive Length. + </code> + </section> + <funcs> + <func> + <name>at(Subject, Pos) -> int()</name> + <fsummary>Returns the byte at a specific position in a binary</fsummary> + <type> + <v>Subject = binary()</v> + <v>Pos = int() >= 0</v> + </type> + <desc> + + <p>Returns the byte at position <c>Pos</c> (zero-based) in the binary + <c>Subject</c> as an integer. If <c>Pos</c> >= <c>byte_size(Subject)</c>, + a <c>badarg</c> + exception is raised.</p> + + </desc> + </func> + <func> + <name>bin_to_list(Subject) -> list()</name> + <fsummary>Convert a binary to a list of integers</fsummary> + <type> + <v>Subject = binary()</v> + </type> + <desc> + <p>The same as <c>bin_to_list(Subject,{0,byte_size(Subject)})</c>.</p> + </desc> + </func> + <func> + <name>bin_to_list(Subject, PosLen) -> list()</name> + <fsummary>Convert a binary to a list of integers</fsummary> + <type> + <v>Subject = binary()</v> + <v>PosLen = part()</v> + </type> + <desc> + + <p>Converts <c>Subject</c> to a list of <c>int()</c>s, each representing + the value of one byte. The <c>part()</c> denotes which part of the + <c>binary()</c> to convert. Example:</p> + +<code> +1> binary:bin_to_list(<<"erlang">>,{1,3}). +"rla" +%% or [114,108,97] in list notation. +</code> + <p>If <c>PosLen</c> in any way references outside the binary, a <c>badarg</c> exception is raised.</p> + </desc> + </func> + <func> + <name>bin_to_list(Subject, Pos, Len) -> list()</name> + <fsummary>Convert a binary to a list of integers</fsummary> + <type> + <v>Subject = binary()</v> + <v>Pos = int()</v> + <v>Len = int()</v> + </type> + <desc> + <p>The same as<c> bin_to_list(Subject,{Pos,Len})</c>.</p> + </desc> + </func> + <func> + <name>compile_pattern(Pattern) -> cp()</name> + <fsummary>Pre-compiles a binary search pattern</fsummary> + <type> + <v>Pattern = binary() | [ binary() ]</v> + </type> + <desc> + + <p>Builds an internal structure representing a compilation of a + search-pattern, later to be used in the <seealso marker="#match-3">match/3</seealso>, + <seealso marker="#matches-3">matches/3</seealso>, + <seealso marker="#split-3">split/3</seealso> or + <seealso marker="#replace-4">replace/4</seealso> + functions. The <c>cp()</c> returned is guaranteed to be a + <c>tuple()</c> to allow programs to distinguish it from non + pre-compiled search patterns</p> + + <p>When a list of binaries is given, it denotes a set of + alternative binaries to search for. I.e if + <c>[<<"functional">>,<<"programming">>]</c> + is given as <c>Pattern</c>, this + means "either <c><<"functional">></c> or + <c><<"programming">></c>". The pattern is a set of + alternatives; when only a single binary is given, the set has + only one element. The order of alternatives in a pattern is not significant.</p> + + <p>The list of binaries used for search alternatives shall be flat and proper.</p> + + <p>If <c>Pattern</c> is not a binary or a flat proper list of binaries with length > 0, + a <c>badarg</c> exception will be raised.</p> + + </desc> + </func> + <func> + <name>copy(Subject) -> binary()</name> + <fsummary>Creates a duplicate of a binary</fsummary> + <type> + <v>Subject = binary()</v> + </type> + <desc> + <p>The same as <c>copy(Subject, 1)</c>.</p> + </desc> + </func> + <func> + <name>copy(Subject,N) -> binary()</name> + <fsummary>Duplicates a binary N times and creates a new</fsummary> + <type> + <v>Subject = binary()</v> + <v>N = int() >= 0</v> + </type> + <desc> + <p>Creates a binary with the content of <c>Subject</c> duplicated <c>N</c> times.</p> + + <p>This function will always create a new binary, even if <c>N = + 1</c>. By using <c>copy/1</c> on a binary referencing a larger binary, one + might free up the larger binary for garbage collection.</p> + + <note> + <p>By deliberately copying a single binary to avoid referencing + a larger binary, one might, instead of freeing up the larger + binary for later garbage collection, create much more binary + data than needed. Sharing binary data is usually good. Only in + special cases, when small parts reference large binaries and the + large binaries are no longer used in any process, deliberate + copying might be a good idea.</p> </note> + + <p>If <c>N</c> < <c>0</c>, a <c>badarg</c> exception is raised.</p> + </desc> + </func> + <func> + <name>decode_unsigned(Subject) -> Unsigned</name> + <fsummary>Decode a whole binary into an integer of arbitrary size</fsummary> + <type> + <v>Subject = binary()</v> + <v>Unsigned = int() >= 0</v> + </type> + <desc> + <p>The same as <c>decode_unsigned(Subject,big)</c>.</p> + </desc> + </func> + <func> + <name>decode_unsigned(Subject, Endianess) -> Unsigned</name> + <fsummary>Decode a whole binary into an integer of arbitrary size</fsummary> + <type> + <v>Subject = binary()</v> + <v>Endianess = big | little</v> + <v>Unsigned = int() >= 0</v> + </type> + <desc> + + <p>Converts the binary digit representation, in big or little + endian, of a positive integer in <c>Subject</c> to an Erlang <c>int()</c>.</p> + + <p>Example:</p> + + <code> +1> binary:decode_unsigned(<<169,138,199>>,big). +11111111 + </code> + </desc> + </func> + <func> + <name>encode_unsigned(Unsigned) -> binary()</name> + <fsummary>Encodes an unsigned integer into the minimal binary</fsummary> + <type> + <v>Unsigned = int() >= 0</v> + </type> + <desc> + <p>The same as <c>encode_unsigned(Unsigned,big)</c>.</p> + </desc> + </func> + <func> + <name>encode_unsigned(Unsigned,Endianess) -> binary()</name> + <fsummary>Encodes an unsigned integer into the minimal binary</fsummary> + <type> + <v>Unsigned = int() >= 0</v> + <v>Endianess = big | little</v> + </type> + <desc> + + <p>Converts a positive integer to the smallest possible + representation in a binary digit representation, either big + or little endian.</p> + + <p>Example:</p> + + <code> +1> binary:encode_unsigned(11111111,big). +<<169,138,199>> + </code> + </desc> + </func> + <func> + <name>first(Subject) -> int()</name> + <fsummary>Returns the first byte of a binary</fsummary> + <type> + <v>Subject = binary()</v> + </type> + <desc> + + <p>Returns the first byte of the binary <c>Subject</c> as an integer. If the + size of <c>Subject</c> is zero, a <c>badarg</c> exception is raised.</p> + + </desc> + </func> + <func> + <name>last(Subject) -> int()</name> + <fsummary>Returns the last byte of a binary</fsummary> + <type> + <v>Subject = binary()</v> + </type> + <desc> + + <p>Returns the last byte of the binary <c>Subject</c> as an integer. If the + size of <c>Subject</c> is zero, a <c>badarg</c> exception is raised.</p> + + </desc> + </func> + <func> + <name>list_to_bin(ByteList) -> binary()</name> + <fsummary>Convert a list of integers and binaries to a binary</fsummary> + <type> + <v>ByteList = iodata() (see module erlang)</v> + </type> + <desc> + <p>Works exactly as <c>erlang:list_to_binary/1</c>, added for completeness.</p> + </desc> + </func> + <func> + <name>longest_common_prefix(Binaries) -> int()</name> + <fsummary>Returns length of longest common prefix for a set of binaries</fsummary> + <type> + <v>Binaries = [ binary() ]</v> + </type> + <desc> + + <p>Returns the length of the longest common prefix of the + binaries in the list <c>Binaries</c>. Example:</p> + +<code> +1> binary:longest_common_prefix([<<"erlang">>,<<"ergonomy">>]). +2 +2> binary:longest_common_prefix([<<"erlang">>,<<"perl">>]). +0 +</code> + + <p>If <c>Binaries</c> is not a flat list of binaries, a <c>badarg</c> exception is raised.</p> + </desc> + </func> + <func> + <name>longest_common_suffix(Binaries) -> int()</name> + <fsummary>Returns length of longest common suffix for a set of binaries</fsummary> + <type> + <v>Binaries = [ binary() ]</v> + </type> + <desc> + + <p>Returns the length of the longest common suffix of the + binaries in the list <c>Binaries</c>. Example:</p> + +<code> +1> binary:longest_common_suffix([<<"erlang">>,<<"fang">>]). +3 +2> binary:longest_common_suffix([<<"erlang">>,<<"perl">>]). +0 +</code> + + <p>If <c>Binaries</c> is not a flat list of binaries, a <c>badarg</c> exception is raised.</p> + + </desc> + </func> + <func> + <name>match(Subject, Pattern) -> Found | <c>nomatch</c></name> + <fsummary>Searches for the first match of a pattern in a binary</fsummary> + <type> + <v>Subject = binary()</v> + <v>Pattern = binary() | [ binary() ] | cp()</v> + <v>Found = part()</v> + </type> + <desc> + <p>The same as <c>match(Subject, Pattern, [])</c>.</p> + </desc> + </func> + <func> + <name>match(Subject,Pattern,Options) -> Found | <c>nomatch</c></name> + <fsummary>Searches for the first match of a pattern in a binary</fsummary> + <type> + <v>Subject = binary()</v> + <v>Pattern = binary() | [ binary() ] | cp()</v> + <v>Found = part()</v> + <v>Options = [ Option ]</v> + <v>Option = {scope, part()}</v> + </type> + <desc> + + <p>Searches for the first occurrence of <c>Pattern</c> in <c>Subject</c> and + returns the position and length.</p> + + <p>The function will return <c>{Pos,Length}</c> for the binary + in <c>Pattern</c> starting at the lowest position in + <c>Subject</c>, Example:</p> + +<code> +1> binary:match(<<"abcde">>, [<<"bcde">>,<<"cd">>],[]). +{1,4} +</code> + + <p>Even though <c><<"cd">></c> ends before + <c><<"bcde">></c>, <c><<"bcde">></c> + begins first and is therefore the first match. If two + overlapping matches begin at the same position, the longest is + returned.</p> + + <p>Summary of the options:</p> + + <taglist> + <tag>{scope, {Start, Length}}</tag> + <item><p>Only the given part is searched. Return values still have + offsets from the beginning of <c>Subject</c>. A negative <c>Length</c> is + allowed as described in the <c>TYPES</c> section of this manual.</p></item> + </taglist> + + <p>If none of the strings in + <c>Pattern</c> is found, the atom <c>nomatch</c> is returned.</p> + + <p>For a description of <c>Pattern</c>, see + <seealso marker="#compile_pattern-1">compile_pattern/1</seealso>.</p> + + <p>If <c>{scope, {Start,Length}}</c> is given in the options + such that <c>Start</c> is larger than the size of + <c>Subject</c>, <c>Start + Length</c> is less than zero or + <c>Start + Length</c> is larger than the size of + <c>Subject</c>, a <c>badarg</c> exception is raised.</p> + + </desc> + </func> + <func> + <name>matches(Subject, Pattern) -> Found</name> + <fsummary>Searches for all matches of a pattern in a binary</fsummary> + <type> + <v>Subject = binary()</v> + <v>Pattern = binary() | [ binary() ] | cp()</v> + <v>Found = [ part() ] | []</v> + </type> + <desc> + <p>The same as <c>matches(Subject, Pattern, [])</c>.</p> + </desc> + </func> + <func> + <name>matches(Subject,Pattern,Options) -> Found</name> + <fsummary>Searches for all matches of a pattern in a binary</fsummary> + <type> + <v>Subject = binary()</v> + <v>Pattern = binary() | [ binary() ] | cp()</v> + <v>Found = [ part() ] | []</v> + <v>Options = [ Option ]</v> + <v>Option = {scope, part()}</v> + </type> + <desc> + + <p>Works like match, but the <c>Subject</c> is searched until + exhausted and a list of all non-overlapping parts matching + <c>Pattern</c> is returned (in order). </p> + + <p>The first and longest match is preferred to a shorter, + which is illustrated by the following example:</p> + +<code> +1> binary:matches(<<"abcde">>, + [<<"bcde">>,<<"bc">>>,<<"de">>],[]). +[{1,4}] +</code> + + <p>The result shows that <<bcde">> is selected instead of the + shorter match <<"bc">> (which would have given raise to one + more match,<<"de">>). This corresponds to the behavior of posix + regular expressions (and programs like awk), but is not + consistent with alternative matches in re (and Perl), where + instead lexical ordering in the search pattern selects which + string matches.</p> + + <p>If none of the strings in pattern is found, an empty list is returned.</p> + + <p>For a description of <c>Pattern</c>, see <seealso marker="#compile_pattern-1">compile_pattern/1</seealso> and for a + description of available options, see <seealso marker="#match-3">match/3</seealso>.</p> + + <p>If <c>{scope, {Start,Length}}</c> is given in the options such that + <c>Start</c> is larger than the size of <c>Subject</c>, <c>Start + Length</c> is + less than zero or <c>Start + Length</c> is larger than the size of + <c>Subject</c>, a <c>badarg</c> exception is raised.</p> + + </desc> + </func> + <func> + <name>part(Subject, PosLen) -> binary()</name> + <fsummary>Extracts a part of a binary</fsummary> + <type> + <v>Subject = binary()</v> + <v>PosLen = part()</v> + </type> + <desc> + + <p>Extracts the part of the binary <c>Subject</c> described by <c>PosLen</c>.</p> + + <p>Negative length can be used to extract bytes at the end of a binary:</p> + +<code> +1> Bin = <<1,2,3,4,5,6,7,8,9,10>>. +2> binary:part(Bin,{byte_size(Bin), -5)). +<<6,7,8,9,10>> +</code> + + <note> + <p><seealso marker="#part-2">part/2</seealso>and <seealso + marker="#part-3">part/3</seealso> are also available in the + <c>erlang</c> module under the names <c>binary_part/2</c> and + <c>binary_part/3</c>. Those BIFs are allowed in guard tests.</p> + </note> + + <p>If <c>PosLen</c> in any way references outside the binary, a <c>badarg</c> exception + is raised.</p> + + </desc> + </func> + <func> + <name>part(Subject, Pos, Len) -> binary()</name> + <fsummary>Extracts a part of a binary</fsummary> + <type> + <v>Subject = binary()</v> + <v>Pos = int()</v> + <v>Len = int()</v> + </type> + <desc> + <p>The same as <c>part(Subject, {Pos, Len})</c>.</p> + </desc> + </func> + <func> + <name>referenced_byte_size(binary()) -> int()</name> + <fsummary>Determines the size of the actual binary pointed out by a sub-binary</fsummary> + <desc> + + <p>If a binary references a larger binary (often described as + being a sub-binary), it can be useful to get the size of the + actual referenced binary. This function can be used in a program + to trigger the use of <c>copy/1</c>. By copying a binary, one might + dereference the original, possibly large, binary which a smaller + binary is a reference to.</p> + + <p>Example:</p> + + <code> +store(Binary, GBSet) -> + NewBin = + case binary:referenced_byte_size(Binary) of + Large when Large > 2 * byte_size(Binary) -> + binary:copy(Binary); + _ -> + Binary + end, + gb_sets:insert(NewBin,GBSet). + </code> + + <p>In this example, we chose to copy the binary content before + inserting it in the <c>gb_set()</c> if it references a binary more than + twice the size of the data we're going to keep. Of course + different rules for when copying will apply to different + programs.</p> + + <p>Binary sharing will occur whenever binaries are taken apart, + this is the fundamental reason why binaries are fast, + decomposition can always be done with O(1) complexity. In rare + circumstances this data sharing is however undesirable, why this + function together with <c>copy/1</c> might be useful when optimizing + for memory use.</p> + + <p>Example of binary sharing:</p> + + <code> +1> A = binary:copy(<<1>>,100). +<<1,1,1,1,1 ... +2> byte_size(A). +100 +3> binary:referenced_byte_size(A) +100 +4> <<_:10/binary,B:10/binary,_/binary>> = A. +<<1,1,1,1,1 ... +5> byte_size(B). +10 +6> binary:referenced_byte_size(B) +100 + </code> + + <note> + <p>Binary data is shared among processes. If another process + still references the larger binary, copying the part this + process uses only consumes more memory and will not free up the + larger binary for garbage collection. Use this kind of intrusive + functions with extreme care, and only if a real problem is + detected.</p> + </note> + + </desc> + </func> + <func> + <name>replace(Subject,Pattern,Replacement) -> Result</name> + <fsummary>Replaces bytes in a binary according to a pattern</fsummary> + <type> + <v>Subject = binary()</v> + <v>Pattern = binary() | [ binary() ] | cp()</v> + <v>Replacement = binary()</v> + <v>Result = binary()</v> + </type> + <desc> + <p>The same as <c>replace(Subject,Pattern,Replacement,[])</c>.</p> + </desc> + </func> + <func> + <name>replace(Subject,Pattern,Replacement,Options) -> Result</name> + <fsummary>Replaces bytes in a binary according to a pattern</fsummary> + <type> + <v>Subject = binary()</v> + <v>Pattern = binary() | [ binary() ] | cp()</v> + <v>Replacement = binary()</v> + <v>Result = binary()</v> + <v>Options = [ Option ]</v> + <v>Option = global | {scope, part()} | {insert_replaced, InsPos}</v> + <v>InsPos = OnePos | [ OnePos ]</v> + <v>OnePos = int() =< byte_size(Replacement)</v> + </type> + <desc> + + <p>Constructs a new binary by replacing the parts in + <c>Subject</c> matching <c>Pattern</c> with the content of + <c>Replacement</c>.</p> + + <p>If the matching sub-part of <c>Subject</c> giving raise to the + replacement is to be inserted in the result, the option + <c>{insert_replaced, InsPos}</c> will insert the matching part into + <c>Replacement</c> at the given position (or positions) before actually + inserting <c>Replacement</c> into the <c>Subject</c>. Example:</p> + +<code> +1> binary:replace(<<"abcde">>,<<"b">>,<<"[]">>,[{insert_replaced,1}]). +<<"a[b]cde">> +2> binary:replace(<<"abcde">>,[<<"b">>,<<"d">>],<<"[]">>, + [global,{insert_replaced,1}]). +<<"a[b]c[d]e">> +3> binary:replace(<<"abcde">>,[<<"b">>,<<"d">>],<<"[]">>, + [global,{insert_replaced,[1,1]}]). +<<"a[bb]c[dd]e">> +4> binary:replace(<<"abcde">>,[<<"b">>,<<"d">>],<<"[-]">>, + [global,{insert_replaced,[1,2]}]). +<<"a[b-b]c[d-d]e">> +</code> + + <p>If any position given in <c>InsPos</c> is greater than the size of the replacement binary, a <c>badarg</c> exception is raised.</p> + + <p>The options <c>global</c> and <c>{scope, part()}</c> work as for <seealso marker="#split-3">split/3</seealso>. The return type is always a <c>binary()</c>.</p> + + <p>For a description of <c>Pattern</c>, see <seealso marker="#compile_pattern-1">compile_pattern/1</seealso>.</p> + </desc> + </func> + <func> + <name>split(Subject,Pattern) -> Parts</name> + <fsummary>Splits a binary according to a pattern</fsummary> + <type> + <v>Subject = binary()</v> + <v>Pattern = binary() | [ binary() ] | cp()</v> + <v>Parts = [ binary() ]</v> + </type> + <desc> + <p>The same as <c>split(Subject, Pattern, [])</c>.</p> + </desc> + </func> + <func> + <name>split(Subject,Pattern,Options) -> Parts</name> + <fsummary>Splits a binary according to a pattern</fsummary> + <type> + <v>Subject = binary()</v> + <v>Pattern = binary() | [ binary() ] | cp()</v> + <v>Parts = [ binary() ]</v> + <v>Options = [ Option ]</v> + <v>Option = {scope, part()} | trim | global</v> + </type> + <desc> + + <p>Splits Binary into a list of binaries based on Pattern. If + the option global is not given, only the first occurrence of + Pattern in Subject will give rise to a split.</p> + + <p>The parts of Pattern actually found in Subject are not included in the result.</p> + + <p>Example:</p> + +<code> +1> binary:split(<<1,255,4,0,0,0,2,3>>, [<<0,0,0>>,<<2>>],[]). +[<<1,255,4>>, <<2,3>>] +2> binary:split(<<0,1,0,0,4,255,255,9>>, [<<0,0>>, <<255,255>>],[global]). +[<<0,1>>,<<4>>,<<9>>] +</code> + + <p>Summary of options:</p> + <taglist> + + <tag>{scope, part()}</tag> + + <item><p>Works as in <seealso marker="#match-3">match/3</seealso> and + <seealso marker="#matches-3">matches/3</seealso>. Note that + this only defines the scope of the search for matching strings, + it does not cut the binary before splitting. The bytes before + and after the scope will be kept in the result. See example + below.</p></item> + + <tag>trim</tag> + + <item><p>Removes trailing empty parts of the result (as does trim in <c>re:split/3</c>)</p></item> + + <tag>global</tag> + + <item><p>Repeats the split until the <c>Subject</c> is + exhausted. Conceptually the global option makes split work on + the positions returned by <seealso marker="#matches-3">matches/3</seealso>, + while it normally + works on the position returned by + <seealso marker="#match-3">match/3</seealso>.</p></item> + + </taglist> + + <p>Example of the difference between a scope and taking the + binary apart before splitting:</p> + +<code> +1> binary:split(<<"banana">>,[<<"a">>],[{scope,{2,3}}]). +[<<"ban">>,<<"na">>] +2> binary:split(binary:part(<<"banana">>,{2,3}),[<<"a">>],[]). +[<<"n">>,<<"n">>] +</code> + + <p>The return type is always a list of binaries that are all + referencing <c>Subject</c>. This means that the data in <c>Subject</c> is not + actually copied to new binaries and that <c>Subject</c> cannot be + garbage collected until the results of the split are no longer + referenced.</p> + + <p>For a description of <c>Pattern</c>, see <seealso marker="#compile_pattern-1">compile_pattern/1</seealso>.</p> + + </desc> + </func> + </funcs> +</erlref> diff --git a/lib/stdlib/doc/src/dets.xml b/lib/stdlib/doc/src/dets.xml index 8d1398d3b7..b002af6616 100644 --- a/lib/stdlib/doc/src/dets.xml +++ b/lib/stdlib/doc/src/dets.xml @@ -4,7 +4,7 @@ <erlref> <header> <copyright> - <year>1996</year><year>2009</year> + <year>1996</year><year>2010</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -109,7 +109,7 @@ bool() = true | false file() = string() int() = integer() >= 0 keypos() = integer() >= 1 -name() = atom() | ref() +name() = atom() | reference() no_slots() = integer() >= 0 | default object() = tuple() object_cont() = tuple() @@ -759,7 +759,7 @@ ok <fsummary>Open an existing Dets table.</fsummary> <type> <v>FileName = file()</v> - <v>Reference = ref()</v> + <v>Reference = reference()</v> </type> <desc> <p>Opens an existing table. If the table has not been properly @@ -816,7 +816,7 @@ ok </item> <item> <p><c>{max_no_slots, no_slots()}</c>, the maximum number - of slots that will be used. The default value is 2 M, and + of slots that will be used. The default value as well as the maximal value is 32 M. Note that a higher value may increase the fragmentation of the table, and conversely, that a smaller value may decrease the fragmentation, at diff --git a/lib/stdlib/doc/src/erl_id_trans.xml b/lib/stdlib/doc/src/erl_id_trans.xml index 7c821d2efc..cfb18ec131 100644 --- a/lib/stdlib/doc/src/erl_id_trans.xml +++ b/lib/stdlib/doc/src/erl_id_trans.xml @@ -5,7 +5,7 @@ <header> <copyright> <year>1996</year> - <year>2007</year> + <year>2010</year> <holder>Ericsson AB, All Rights Reserved</holder> </copyright> <legalnotice> @@ -70,7 +70,8 @@ <section> <title>See Also</title> - <p><seealso marker="erl_parse">erl_parse(3)</seealso>, compile(3).</p> + <p><seealso marker="erl_parse">erl_parse(3)</seealso>, + <seealso marker="compiler:compile">compile(3)</seealso>.</p> </section> </erlref> diff --git a/lib/stdlib/doc/src/erl_lint.xml b/lib/stdlib/doc/src/erl_lint.xml index 6a7d37765c..8639d678fa 100644 --- a/lib/stdlib/doc/src/erl_lint.xml +++ b/lib/stdlib/doc/src/erl_lint.xml @@ -96,8 +96,8 @@ <p>The <c>AbsForms</c> of a module which comes from a file that is read through <c>epp</c>, the Erlang pre-processor, can come from many files. This means that any references to - errors must include the file name (see <seealso marker="epp">epp(3)</seealso>, or parser <seealso marker="erl_parse">erl_parse(3)</seealso> The warnings and - errors returned have the following format: + errors must include the file name (see <seealso marker="epp">epp(3)</seealso>, or parser <seealso marker="erl_parse">erl_parse(3)</seealso>). + The warnings and errors returned have the following format: </p> <code type="none"> [{FileName2,[ErrorInfo]}] </code> diff --git a/lib/stdlib/doc/src/erl_parse.xml b/lib/stdlib/doc/src/erl_parse.xml index ae8a8afd5c..18b592deea 100644 --- a/lib/stdlib/doc/src/erl_parse.xml +++ b/lib/stdlib/doc/src/erl_parse.xml @@ -39,7 +39,7 @@ expressions, or terms. The Abstract Format is described in the ERTS User's Guide. Note that a token list must end with the <em>dot</em> token in order - to be acceptable to the parse functions (see erl_scan).</p> + to be acceptable to the parse functions (see <seealso marker="erl_scan">erl_scan(3)</seealso>).</p> </description> <funcs> <func> diff --git a/lib/stdlib/doc/src/erl_scan.xml b/lib/stdlib/doc/src/erl_scan.xml index 4175146c3c..1199c34f0f 100644 --- a/lib/stdlib/doc/src/erl_scan.xml +++ b/lib/stdlib/doc/src/erl_scan.xml @@ -4,7 +4,7 @@ <erlref> <header> <copyright> - <year>1996</year><year>2009</year> + <year>1996</year><year>2010</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -13,12 +13,12 @@ compliance with the License. You should have received a copy of the Erlang Public License along with this software. If not, it can be retrieved online at http://www.erlang.org/. - + Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for the specific language governing rights and limitations under the License. - + </legalnotice> <title>erl_scan</title> @@ -103,7 +103,7 @@ attributes() = line() | list() | tuple()</code> Info, atom()}</c>, <c>{char, Info, integer()}</c>, <c>{comment, Info, string()}</c>, <c>{float, Info, float()}</c>, <c>{integer, - Info, integer()}</c>, <c>{var, Info, atom()}</c>, + Info, integer()}</c>, <c>{var, Info, atom()}</c>, and <c>{white_space, Info, string()}</c>.</p> <p>The valid options are:</p> <taglist> @@ -149,7 +149,8 @@ attributes() = line() | list() | tuple()</code> <v>StartLocation = EndLocation = location()</v> <v>Options = Option | [Option]</v> <v>Option = {reserved_word_fun,reserved_word_fun()} - | return_comments | return_white_spaces | return</v> + | return_comments | return_white_spaces | return + | text</v> </type> <desc> <p>This is the re-entrant scanner which scans characters until @@ -173,7 +174,7 @@ attributes() = line() | list() | tuple()</code> <tag><c>{error, ErrorInfo, EndLocation}</c></tag> <item> <p>An error occurred. <c>LeftOverChars</c> is the remaining - characters of the input data, + characters of the input data, starting from <c>EndLocation</c>.</p> </item> </taglist> @@ -278,7 +279,7 @@ attributes() = line() | list() | tuple()</code> <item><p>The token's symbol.</p> </item> <tag><c>{text, string()}</c></tag> - <item><p>The token's text..</p> + <item><p>The token's text.</p> </item> </taglist> </desc> @@ -315,7 +316,7 @@ attributes() = line() | list() | tuple()</code> <type> <v>Attributes = attributes()</v> <v>AttributeItemSpec = AttributeItem | [AttributeItem]</v> - <v>AttributesInfo = AttributeInfoTuple | undefined + <v>AttributesInfo = AttributeInfoTuple | undefined | [AttributeInfoTuple]</v> <v>AttributeInfoTuple = {AttributeItem, Info}</v> <v>AttributeItem = atom()</v> @@ -352,7 +353,7 @@ attributes() = line() | list() | tuple()</code> just the line if the column unknown.</p> </item> <tag><c>{text, string()}</c></tag> - <item><p>The token's text..</p> + <item><p>The token's text.</p> </item> </taglist> </desc> diff --git a/lib/stdlib/doc/src/ets.xml b/lib/stdlib/doc/src/ets.xml index 7b9f0e7772..746f94d3f4 100644 --- a/lib/stdlib/doc/src/ets.xml +++ b/lib/stdlib/doc/src/ets.xml @@ -4,7 +4,7 @@ <erlref> <header> <copyright> - <year>1996</year><year>2009</year> + <year>1996</year><year>2010</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -13,12 +13,12 @@ compliance with the License. You should have received a copy of the Erlang Public License along with this software. If not, it can be retrieved online at http://www.erlang.org/. - + Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for the specific language governing rights and limitations under the License. - + </legalnotice> <title>ets</title> @@ -56,8 +56,8 @@ Even if there are no references to a table from any process, it will not automatically be destroyed unless the owner process terminates. It can be destroyed explicitly by using - <c>delete/1</c>.</p> - <p>Since R13B01, table ownership can be transferred at process termination + <c>delete/1</c>. The default owner is the process that created the + table. Table ownership can be transferred at process termination by using the <seealso marker="#heir">heir</seealso> option or explicitly by calling <seealso marker="#give_away/3">give_away/3</seealso>.</p> <p>Some implementation details:</p> @@ -82,11 +82,15 @@ <c>float()</c> that extends to the same value, hence the key <c>1</c> and the key <c>1.0</c> are regarded as equal in an <c>ordered_set</c> table.</p> - <p>In general, the functions below will exit with reason - <c>badarg</c> if any argument is of the wrong format, or if the - table identifier is invalid.</p> </description> - + <section> + <title>Failure</title> + <p>In general, the functions below will exit with reason + <c>badarg</c> if any argument is of the wrong format, if the + table identifier is invalid or if the operation is denied due to + table access rights (<seealso marker="#protected">protected</seealso> + or <seealso marker="#private">private</seealso>).</p> + </section> <section><marker id="concurrency"></marker> <title>Concurrency</title> <p>This module provides some limited support for concurrent access. @@ -481,6 +485,9 @@ Error: fun containing local Erlang function calls <item><c>Item=protection, Value=public|protected|private</c> <br></br> The table access rights.</item> + <item><c>Item=compressed, Value=true|false</c> <br></br> + + Indicates if the table is compressed or not.</item> </list> </desc> </func> @@ -947,9 +954,10 @@ ets:select(Table,MatchSpec),</code> <type> <v>Name = atom()</v> <v>Options = [Option]</v> - <v> Option = Type | Access | named_table | {keypos,Pos} | {heir,pid(),HeirData} | {heir,none} | {write_concurrency,bool()}</v> + <v> Option = Type | Access | named_table | {keypos,Pos} | {heir,pid(),HeirData} | {heir,none} | Tweaks</v> <v> Type = set | ordered_set | bag | duplicate_bag</v> <v> Access = public | protected | private</v> + <v> Tweaks = {write_concurrency,bool()} | {read_concurrency,bool()} | compressed</v> <v> Pos = int()</v> <v> HeirData = term()</v> </type> @@ -963,7 +971,7 @@ ets:select(Table,MatchSpec),</code> table is named or not. If one or more options are left out, the default values are used. This means that not specifying any options (<c>[]</c>) is the same as specifying - <c>[set,protected,{keypos,1},{heir,none},{write_concurrency,false}]</c>.</p> + <c>[set,protected,{keypos,1},{heir,none},{write_concurrency,false},{read_concurrency,false}]</c>.</p> <list type="bulleted"> <item> <p><c>set</c> @@ -1002,12 +1010,14 @@ ets:select(Table,MatchSpec),</code> Any process may read or write to the table.</p> </item> <item> + <marker id="protected"></marker> <p><c>protected</c> The owner process can read and write to the table. Other processes can only read the table. This is the default setting for the access rights.</p> </item> <item> + <marker id="private"></marker> <p><c>private</c> Only the owner process can read or write to the table.</p> </item> @@ -1039,15 +1049,22 @@ ets:select(Table,MatchSpec),</code> the owner terminates.</p> </item> <item> + <marker id="new_2_write_concurrency"></marker> <p><c>{write_concurrency,bool()}</c> - Performance tuning. Default is <c>false</c>, which means that the table - is optimized towards concurrent read access. An operation that + Performance tuning. Default is <c>false</c>, in which case an operation that mutates (writes to) the table will obtain exclusive access, blocking any concurrent access of the same table until finished. If set to <c>true</c>, the table is optimized towards concurrent write access. Different objects of the same table can be mutated (and read) by concurrent processes. This is achieved to some degree - at the expense of single access and concurrent reader performance. + at the expense of sequential access and concurrent reader performance. + The <c>write_concurrency</c> option can be combined with the + <seealso marker="#new_2_read_concurrency">read_concurrency</seealso> + option. You typically want to combine these when large concurrent + read bursts and large concurrent write bursts are common (see the + documentation of the + <seealso marker="#new_2_read_concurrency">read_concurrency</seealso> + option for more information). Note that this option does not change any guarantees about <seealso marker="#concurrency">atomicy and isolation</seealso>. Functions that makes such promises over several objects (like @@ -1055,6 +1072,38 @@ ets:select(Table,MatchSpec),</code> <p>Table type <c>ordered_set</c> is not affected by this option in current implementation.</p> </item> + <item> + <marker id="new_2_read_concurrency"></marker> + <p><c>{read_concurrency,bool()}</c> + Performance tuning. Default is <c>false</c>. When set to + <c>true</c>, the table is optimized for concurrent read + operations. When this option is enabled on a runtime system with + SMP support, read operations become much cheaper; especially on + systems with multiple physical processors. However, switching + between read and write operations becomes more expensive. You + typically want to enable this option when concurrent read + operations are much more frequent than write operations, or when + concurrent reads and writes comes in large read and write + bursts (i.e., lots of reads not interrupted by writes, and lots + of writes not interrupted by reads). You typically do + <em>not</em> want to enable this option when the common access + pattern is a few read operations interleaved with a few write + operations repeatedly. In this case you will get a performance + degradation by enabling this option. The <c>read_concurrency</c> + option can be combined with the + <seealso marker="#new_2_write_concurrency">write_concurrency</seealso> + option. You typically want to combine these when large concurrent + read bursts and large concurrent write bursts are common.</p> + </item> + <item> + <marker id="new_2_compressed"></marker> + <p><c>compressed</c> + If this option is present, the table data will be stored in a more compact format to + consume less memory. The downside is that it will make table operations slower. + Especially operations that need to inspect entire objects, + such as <c>match</c> and <c>select</c>, will get much slower. The key element + is not compressed in current implementation.</p> + </item> </list> </desc> </func> @@ -1355,6 +1404,28 @@ is_integer(X), is_integer(Y), X + Y < 4711]]></code> </desc> </func> <func> + <name>select_count(Tab, MatchSpec) -> NumMatched</name> + <fsummary>Match the objects in an ETS table against a match_spec and returns the number of objects for which the match_spec returned 'true'</fsummary> + <type> + <v>Tab = tid() | atom()</v> + <v>Object = tuple()</v> + <v>MatchSpec = match_spec()</v> + <v>NumMatched = integer()</v> + </type> + <desc> + <p>Matches the objects in the table <c>Tab</c> using a + <seealso marker="#match_spec">match_spec</seealso>. If the + match_spec returns <c>true</c> for an object, that object + considered a match and is counted. For any other result from + the match_spec the object is not considered a match and is + therefore not counted.</p> + <p>The function could be described as a <c>match_delete/2</c> + that does not actually delete any elements, but only counts + them.</p> + <p>The function returns the number of objects matched.</p> + </desc> + </func> + <func> <name>select_delete(Tab, MatchSpec) -> NumDeleted</name> <fsummary>Match the objects in an ETS table against a match_spec and deletes objects where the match_spec returns 'true'</fsummary> <type> @@ -1381,25 +1452,82 @@ is_integer(X), is_integer(Y), X + Y < 4711]]></code> </desc> </func> <func> - <name>select_count(Tab, MatchSpec) -> NumMatched</name> - <fsummary>Match the objects in an ETS table against a match_spec and returns the number of objects for which the match_spec returned 'true'</fsummary> + <name>select_reverse(Tab, MatchSpec) -> [Match]</name> + <fsummary>Match the objects in an ETS table against a match_spec.</fsummary> <type> <v>Tab = tid() | atom()</v> - <v>Object = tuple()</v> + <v>Match = term()</v> <v>MatchSpec = match_spec()</v> - <v>NumMatched = integer()</v> </type> <desc> - <p>Matches the objects in the table <c>Tab</c> using a - <seealso marker="#match_spec">match_spec</seealso>. If the - match_spec returns <c>true</c> for an object, that object - considered a match and is counted. For any other result from - the match_spec the object is not considered a match and is - therefore not counted.</p> - <p>The function could be described as a <c>match_delete/2</c> - that does not actually delete any elements, but only counts - them.</p> - <p>The function returns the number of objects matched.</p> + + <p>Works like <c>select/2</c>, but returns the list in reverse + order for the <c>ordered_set</c> table type. For all other table + types, the return value is identical to that of <c>select/2</c>.</p> + + </desc> + </func> + <func> + <name>select_reverse(Tab, MatchSpec, Limit) -> {[Match],Continuation} | '$end_of_table'</name> + <fsummary>Match the objects in an ETS table against a match_spec and returns part of the answers.</fsummary> + <type> + <v>Tab = tid() | atom()</v> + <v>Match = term()</v> + <v>MatchSpec = match_spec()</v> + <v>Continuation = term()</v> + </type> + <desc> + + <p>Works like <c>select/3</c>, but for the <c>ordered_set</c> + table type, traversing is done starting at the last object in + Erlang term order and moves towards the first. For all other + table types, the return value is identical to that of + <c>select/3</c>.</p> + + <p>Note that this is <em>not</em> equivalent to + reversing the result list of a <c>select/3</c> call, as the result list + is not only reversed, but also contains the last <c>Limit</c> + matching objects in the table, not the first.</p> + + </desc> + </func> + <func> + <name>select_reverse(Continuation) -> {[Match],Continuation} | '$end_of_table'</name> + <fsummary>Continue matching objects in an ETS table.</fsummary> + <type> + <v>Match = term()</v> + <v>Continuation = term()</v> + </type> + <desc> + + <p>Continues a match started with + <c>ets:select_reverse/3</c>. If the table is an + <c>ordered_set</c>, the traversal of the table will continue + towards objects with keys earlier in the Erlang term order. The + returned list will also contain objects with keys in reverse + order.</p> + + <p>For all other table types, the behaviour is exatly that of <c>select/1</c>.</p> + <p>Example:</p> + <code> +1> T = ets:new(x,[ordered_set]). +2> [ ets:insert(T,{N}) || N <- lists:seq(1,10) ]. +... +3> {R0,C0} = ets:select_reverse(T,[{'_',[],['$_']}],4). +... +4> R0. +[{10},{9},{8},{7}] +5> {R1,C1} = ets:select_reverse(C0). +... +6> R1. +[{6},{5},{4},{3}] +7> {R2,C2} = ets:select_reverse(C1). +... +8> R2. +[{2},{1}] +9> '$end_of_table' = ets:select_reverse(C2). +... + </code> </desc> </func> <func> @@ -1686,7 +1814,7 @@ true</pre> </desc> </func> <func> - <name>to_dets(Tab, DetsTab) -> Tab</name> + <name>to_dets(Tab, DetsTab) -> DetsTab</name> <fsummary>Fill a Dets table with objects from an ETS table.</fsummary> <type> <v>Tab = tid() | atom()</v> diff --git a/lib/stdlib/doc/src/filelib.xml b/lib/stdlib/doc/src/filelib.xml index c1c4ca9350..969aff4fcb 100644 --- a/lib/stdlib/doc/src/filelib.xml +++ b/lib/stdlib/doc/src/filelib.xml @@ -4,7 +4,7 @@ <erlref> <header> <copyright> - <year>2003</year><year>2009</year> + <year>2003</year><year>2010</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -36,14 +36,23 @@ <description> <p>This module contains utilities on a higher level than the <c>file</c> module.</p> + <p>The module supports Unicode file names, so that it will match against regular expressions given in Unicode and that it will find and process raw file names (i.e. files named in a way that does not confirm to the expected encoding).</p> + <p>If the VM operates in Unicode file naming mode on a machine with transparent file naming, the <c>fun()</c> provided to <c>fold_files/5</c> needs to be prepared to handle binary file names.</p> + <p>For more information about raw file names, see the <seealso marker="kernel:file">file</seealso> module.</p> </description> <section> <title>DATA TYPES</title> <code type="none"> -filename() = string() | atom() | DeepList -dirname() = filename() -DeepList = [char() | atom() | DeepList]</code> +filename() = = string() | atom() | DeepList | RawFilename + DeepList = [char() | atom() | DeepList] + RawFilename = binary() + If VM is in unicode filename mode, string() and char() are allowed to be > 255. + RawFilename is a filename not subject to Unicode translation, meaning that it + can contain characters not conforming to the Unicode encoding expected from the + filesystem (i.e. non-UTF-8 characters although the VM is started in Unicode + filename mode). +dirname() = filename()</code> </section> <funcs> @@ -90,6 +99,18 @@ DeepList = [char() | atom() | DeepList]</code> If <c>Recursive</c> is true all sub-directories to <c>Dir</c> are processed. The regular expression matching is done on just the filename without the directory part.</p> + + <p>If Unicode file name translation is in effect and the file + system is completely transparent, file names that cannot be + interpreted as Unicode may be encountered, in which case the + <c>fun()</c> must be prepared to handle raw file names + (i.e. binaries). If the regular expression contains + codepoints beyond 255, it will not match file names that does + not conform to the expected character encoding (i.e. are not + encoded in valid UTF-8).</p> + + <p>For more information about raw file names, see the + <seealso marker="kernel:file">file</seealso> module.</p> </desc> </func> <func> @@ -160,6 +181,12 @@ DeepList = [char() | atom() | DeepList]</code> <p>Matches any number of characters up to the end of the filename, the next dot, or the next slash.</p> </item> + <tag>[Character1,Character2,...]</tag> + <item> + <p>Matches any of the characters listed. Two characters + separated by a hyphen will match a range of characters. + Example: <c>[A-Z]</c> will match any uppercase letter.</p> + </item> <tag>{Item,...}</tag> <item> <p>Alternation. Matches one of the alternatives.</p> diff --git a/lib/stdlib/doc/src/filename.xml b/lib/stdlib/doc/src/filename.xml index 0cf82fa48b..cdee6e4a81 100644 --- a/lib/stdlib/doc/src/filename.xml +++ b/lib/stdlib/doc/src/filename.xml @@ -4,7 +4,7 @@ <erlref> <header> <copyright> - <year>1997</year><year>2009</year> + <year>1997</year><year>2010</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -43,13 +43,22 @@ only, even if the arguments contain back slashes. Use <c>join/1</c> to normalize a file name by removing redundant directory separators.</p> + <p>The module supports raw file names in the way that if a binary is present, or the file name cannot be interpreted according to the return value of + <seealso marker="kernel:file#native_name_encoding/0">file:native_name_encoding/0</seealso>, a raw file name will also be returned. For example filename:join/1 provided with a path component being a binary (and also not being possible to interpret under the current native file name encoding) will result in a raw file name being returned (the join operation will have been performed of course). For more information about raw file names, see the <seealso marker="kernel:file">file</seealso> module.</p> </description> <section> <title>DATA TYPES</title> <code type="none"> -name() = string() | atom() | DeepList - DeepList = [char() | atom() | DeepList]</code> +name() = string() | atom() | DeepList | RawFilename + DeepList = [char() | atom() | DeepList] + RawFilename = binary() + If VM is in unicode filename mode, string() and char() are allowed to be > 255. + RawFilename is a filename not subject to Unicode translation, meaning that it + can contain characters not conforming to the Unicode encoding expected from the + filesystem (i.e. non-UTF-8 characters although the VM is started in Unicode + filename mode). + </code> </section> <funcs> <func> diff --git a/lib/stdlib/doc/src/gen_event.xml b/lib/stdlib/doc/src/gen_event.xml index df09294de6..2234a62ac3 100644 --- a/lib/stdlib/doc/src/gen_event.xml +++ b/lib/stdlib/doc/src/gen_event.xml @@ -4,7 +4,7 @@ <erlref> <header> <copyright> - <year>1996</year><year>2009</year> + <year>1996</year><year>2010</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -13,12 +13,12 @@ compliance with the License. You should have received a copy of the Erlang Public License along with this software. If not, it can be retrieved online at http://www.erlang.org/. - + Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for the specific language governing rights and limitations under the License. - + </legalnotice> <title>gen_event</title> @@ -630,12 +630,66 @@ gen_event:stop -----> Module:terminate/2 <p>The function should return the updated internal state.</p> </desc> </func> + <func> + <name>Module:format_status(Opt, [PDict, State]) -> Status</name> + <fsummary>Optional function for providing a term describing the + current event handler state.</fsummary> + <type> + <v>Opt = normal | terminate</v> + <v>PDict = [{Key, Value}]</v> + <v>State = term()</v> + <v>Status = term()</v> + </type> + <desc> + <note> + <p>This callback is optional, so event handler modules need + not export it. If a handler does not export this function, + the gen_event module uses the handler state directly for + the purposes described below.</p> + </note> + <p>This function is called by a gen_event process when:</p> + <list typed="bulleted"> + <item>One + of <seealso marker="sys#get_status/1">sys:get_status/1,2</seealso> + is invoked to get the gen_event status. <c>Opt</c> is set + to the atom <c>normal</c> for this case.</item> + <item>The event handler terminates abnormally and gen_event + logs an error. <c>Opt</c> is set to the + atom <c>terminate</c> for this case.</item> + </list> + <p>This function is useful for customising the form and + appearance of the event handler state for these cases. An + event handler callback module wishing to customise + the <c>sys:get_status/1,2</c> return value as well as how + its state appears in termination error logs exports an + instance of <c>format_status/2</c> that returns a term + describing the current state of the event handler.</p> + <p><c>PDict</c> is the current value of the gen_event's + process dictionary.</p> + <p><c>State</c> is the internal state of the event + handler.</p> + <p>The function should return <c>Status</c>, a term that + customises the details of the current state of the event + handler. Any term is allowed for <c>Status</c>. The + gen_event module uses <c>Status</c> as follows:</p> + <list typed="bulleted"> + <item>When <c>sys:get_status/1,2</c> is called, gen_event + ensures that its return value contains <c>Status</c> in + place of the event handler's actual state term.</item> + <item>When an event handler terminates abnormally, gen_event + logs <c>Status</c> in place of the event handler's actual + state term.</item> + </list> + <p>One use for this function is to return compact alternative + state representations to avoid having large state terms + printed in logfiles.</p> + </desc> + </func> </funcs> <section> <title>SEE ALSO</title> - <p><seealso marker="supervisor">supervisor(3)</seealso>, + <p><seealso marker="supervisor">supervisor(3)</seealso>, <seealso marker="sys">sys(3)</seealso></p> </section> </erlref> - diff --git a/lib/stdlib/doc/src/gen_fsm.xml b/lib/stdlib/doc/src/gen_fsm.xml index 739cd0bffd..d15383c621 100644 --- a/lib/stdlib/doc/src/gen_fsm.xml +++ b/lib/stdlib/doc/src/gen_fsm.xml @@ -4,7 +4,7 @@ <erlref> <header> <copyright> - <year>1996</year><year>2009</year> + <year>1996</year><year>2010</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -13,12 +13,12 @@ compliance with the License. You should have received a copy of the Erlang Public License along with this software. If not, it can be retrieved online at http://www.erlang.org/. - + Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for the specific language governing rights and limitations under the License. - + </legalnotice> <title>gen_fsm</title> @@ -730,33 +730,58 @@ gen_fsm:sync_send_all_state_event -----> Module:handle_sync_event/4 </desc> </func> <func> - <name>Module:format_status(normal, [PDict, StateData]) -> Status</name> + <name>Module:format_status(Opt, [PDict, StateData]) -> Status</name> <fsummary>Optional function for providing a term describing the current gen_fsm status.</fsummary> <type> + <v>Opt = normal | terminate</v> <v>PDict = [{Key, Value}]</v> <v>StateData = term()</v> - <v>Status = [term()]</v> + <v>Status = term()</v> </type> <desc> - <p><em>This callback is optional, so callback modules need not - export it. The gen_fsm module provides a default - implementation of this function that returns the callback - module state data.</em></p> - <p>This function is called by a gen_fsm process when one - of <seealso marker="sys#get_status/1">sys:get_status/1,2</seealso> - is invoked to get the gen_fsm status. A callback module - wishing to customise the <c>sys:get_status/1,2</c> return - value exports an instance of <c>format_status/2</c> that - returns a term describing the current status of the - gen_fsm.</p> + <note> + <p>This callback is optional, so callback modules need not + export it. The gen_fsm module provides a default + implementation of this function that returns the callback + module state data.</p> + </note> + <p>This function is called by a gen_fsm process when:</p> + <list typed="bulleted"> + <item>One + of <seealso marker="sys#get_status/1">sys:get_status/1,2</seealso> + is invoked to get the gen_fsm status. <c>Opt</c> is set to + the atom <c>normal</c> for this case.</item> + <item>The gen_fsm terminates abnormally and logs an + error. <c>Opt</c> is set to the atom <c>terminate</c> for + this case.</item> + </list> + <p>This function is useful for customising the form and + appearance of the gen_fsm status for these cases. A callback + module wishing to customise the <c>sys:get_status/1,2</c> + return value as well as how its status appears in + termination error logs exports an instance + of <c>format_status/2</c> that returns a term describing the + current status of the gen_fsm.</p> <p><c>PDict</c> is the current value of the gen_fsm's process dictionary.</p> <p><c>StateData</c> is the internal state data of the gen_fsm.</p> - <p>The function should return <c>Status</c>, a list of one or - more terms that customise the details of the current state - and status of the gen_fsm.</p> + <p>The function should return <c>Status</c>, a term that + customises the details of the current state and status of + the gen_fsm. There are no restrictions on the + form <c>Status</c> can take, but for + the <c>sys:get_status/1,2</c> case (when <c>Opt</c> + is <c>normal</c>), the recommended form for + the <c>Status</c> value is <c>[{data, [{"StateData", + Term}]}]</c> where <c>Term</c> provides relevant details of + the gen_fsm state data. Following this recommendation isn't + required, but doing so will make the callback module status + consistent with the rest of the <c>sys:get_status/1,2</c> + return value.</p> + <p>One use for this function is to return compact alternative + state data representations to avoid having large state terms + printed in logfiles.</p> </desc> </func> </funcs> @@ -770,4 +795,3 @@ gen_fsm:sync_send_all_state_event -----> Module:handle_sync_event/4 <seealso marker="sys">sys(3)</seealso></p> </section> </erlref> - diff --git a/lib/stdlib/doc/src/gen_server.xml b/lib/stdlib/doc/src/gen_server.xml index 30c04d1d52..1045766e01 100644 --- a/lib/stdlib/doc/src/gen_server.xml +++ b/lib/stdlib/doc/src/gen_server.xml @@ -4,7 +4,7 @@ <erlref> <header> <copyright> - <year>1996</year><year>2009</year> + <year>1996</year><year>2010</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -13,12 +13,12 @@ compliance with the License. You should have received a copy of the Erlang Public License along with this software. If not, it can be retrieved online at http://www.erlang.org/. - + Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for the specific language governing rights and limitations under the License. - + </legalnotice> <title>gen_server</title> @@ -599,32 +599,57 @@ gen_server:abcast -----> Module:handle_cast/2 </desc> </func> <func> - <name>Module:format_status(normal, [PDict, State]) -> Status</name> + <name>Module:format_status(Opt, [PDict, State]) -> Status</name> <fsummary>Optional function for providing a term describing the current gen_server status.</fsummary> <type> + <v>Opt = normal | terminate</v> <v>PDict = [{Key, Value}]</v> <v>State = term()</v> - <v>Status = [term()]</v> + <v>Status = term()</v> </type> <desc> - <p><em>This callback is optional, so callback modules need not - export it. The gen_server module provides a default - implementation of this function that returns the callback - module state.</em></p> - <p>This function is called by a gen_server process when one + <note> + <p>This callback is optional, so callback modules need not + export it. The gen_server module provides a default + implementation of this function that returns the callback + module state.</p> + </note> + <p>This function is called by a gen_server process when:</p> + <list typed="bulleted"> + <item>One of <seealso marker="sys#get_status/1">sys:get_status/1,2</seealso> - is invoked to get the gen_server status. A callback module - wishing to customise the <c>sys:get_status/1,2</c> return - value exports an instance of <c>format_status/2</c> that - returns a term describing the current status of the - gen_server.</p> + is invoked to get the gen_server status. <c>Opt</c> is set + to the atom <c>normal</c> for this case.</item> + <item>The gen_server terminates abnormally and logs an + error. <c>Opt</c> is set to the atom <c>terminate</c> for this + case.</item> + </list> + <p>This function is useful for customising the form and + appearance of the gen_server status for these cases. A + callback module wishing to customise + the <c>sys:get_status/1,2</c> return value as well as how + its status appears in termination error logs exports an + instance of <c>format_status/2</c> that returns a term + describing the current status of the gen_server.</p> <p><c>PDict</c> is the current value of the gen_server's process dictionary.</p> <p><c>State</c> is the internal state of the gen_server.</p> - <p>The function should return <c>Status</c>, a list of one or - more terms that customise the details of the current state - and status of the gen_server.</p> + <p>The function should return <c>Status</c>, a term that + customises the details of the current state and status of + the gen_server. There are no restrictions on the + form <c>Status</c> can take, but for + the <c>sys:get_status/1,2</c> case (when <c>Opt</c> + is <c>normal</c>), the recommended form for + the <c>Status</c> value is <c>[{data, [{"State", + Term}]}]</c> where <c>Term</c> provides relevant details of + the gen_server state. Following this recommendation isn't + required, but doing so will make the callback module status + consistent with the rest of the <c>sys:get_status/1,2</c> + return value.</p> + <p>One use for this function is to return compact alternative + state representations to avoid having large state terms + printed in logfiles.</p> </desc> </func> </funcs> diff --git a/lib/stdlib/doc/src/io_protocol.xml b/lib/stdlib/doc/src/io_protocol.xml index 201787f7b5..a97d996d98 100644 --- a/lib/stdlib/doc/src/io_protocol.xml +++ b/lib/stdlib/doc/src/io_protocol.xml @@ -79,7 +79,7 @@ sends the reply to.</item> io_reply. The io-module in the Erlang standard library simply uses the pid() of the io_server as the ReplyAs datum, but a more complicated client could have several outstanding io-requests to the same server and -would then use i.e. a ref() or something else to differentiate among +would then use i.e. a reference() or something else to differentiate among the incoming io_reply's. The ReplyAs element should be considered opaque by the io_server. Note that the pid() of the server is not explicitly present in the io_reply. The reply can be sent from any @@ -195,7 +195,7 @@ latin1, Module, Function, Args} respectively. </p> below).</p> <p>The function will be called with the data the io_server finds on - it's device, returning {done, Result, RestChars} when enough data is + its device, returning {done, Result, RestChars} when enough data is read (in which case Result is sent to the client and RestChars are kept in the io_server as a buffer for subsequent input) or {more, Continuation}, indicating that more characters are needed to @@ -741,7 +741,7 @@ optimize anything however. It is important though that the returned data is of the right type depending on the options set, so we convert the lists to binaries in the correct encoding <em>if possible</em> before returning. The function supplied in the get_until request may, -as it's final result return anything, so only functions actually +as its final result return anything, so only functions actually returning lists can get them converted to binaries. If the request contained the encoding tag unicode, the lists can contain all unicode codepoints and the binaries should be in UTF-8, if the encoding tag diff --git a/lib/stdlib/doc/src/lists.xml b/lib/stdlib/doc/src/lists.xml index 855a7e0244..92c4eb4f4c 100644 --- a/lib/stdlib/doc/src/lists.xml +++ b/lib/stdlib/doc/src/lists.xml @@ -48,7 +48,7 @@ <item><p>if x <c>F</c> y and y <c>F</c> x then x = y (<c>F</c> is antisymmetric);</p> </item> - <item><p>if x <c>F</c> y and and y <c>F</c> z then x <c>F</c> z + <item><p>if x <c>F</c> y and y <c>F</c> z then x <c>F</c> z (<c>F</c> is transitive);</p> </item> <item><p>x <c>F</c> y or y <c>F</c> x (<c>F</c> is total).</p> @@ -220,7 +220,7 @@ follows:</p> <code type="none"> flatmap(Fun, List1) -> - append(map(Fun, List1))</code> + append(map(Fun, List1)).</code> <p>Example:</p> <pre> > <input>lists:flatmap(fun(X)->[X,X] end, [a,b,c]).</input> @@ -443,7 +443,7 @@ flatmap(Fun, List1) -> <desc> <p>Returns a list containing the sorted elements of the list <c>TupleList1</c>. Sorting is performed on the <c>N</c>th - element of the tuples.</p> + element of the tuples. The sort is stable.</p> </desc> </func> <func> @@ -466,7 +466,7 @@ flatmap(Fun, List1) -> </desc> </func> <func> - <name>keytake(Key, N, TupleList1) -> {value, Tuple, TupleList2} + <name>keytake(Key, N, TupleList1) -> {value, Tuple, TupleList2} | false</name> <fsummary>Extract an element from a list of tuples</fsummary> <type> @@ -523,7 +523,7 @@ flatmap(Fun, List1) -> <v> A = B = term()</v> </type> <desc> - <p><c>mapfold</c> combines the operations of <c>map/2</c> and + <p><c>mapfoldl</c> combines the operations of <c>map/2</c> and <c>foldl/3</c> into one pass. An example, summing the elements in a list and double them at the same time:</p> <pre> @@ -543,7 +543,7 @@ flatmap(Fun, List1) -> <v> A = B = term()</v> </type> <desc> - <p><c>mapfold</c> combines the operations of <c>map/2</c> and + <p><c>mapfoldr</c> combines the operations of <c>map/2</c> and <c>foldr/3</c> into one pass.</p> </desc> </func> @@ -840,7 +840,7 @@ length(lists:seq(From, To, Incr)) == (To-From+Incr) div Incr</code> <c>Pred</c>. <c>splitwith/2</c> behaves as if it is defined as follows:</p> <code type="none"> -splitwith(Pred, List) -> +splitwith(Pred, List) -> {takewhile(Pred, List), dropwhile(Pred, List)}.</code> <p>Examples:</p> <pre> diff --git a/lib/stdlib/doc/src/ms_transform.xml b/lib/stdlib/doc/src/ms_transform.xml index 9f178b426c..ba9f89685b 100644 --- a/lib/stdlib/doc/src/ms_transform.xml +++ b/lib/stdlib/doc/src/ms_transform.xml @@ -4,7 +4,7 @@ <erlref> <header> <copyright> - <year>2002</year><year>2009</year> + <year>2002</year><year>2010</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -13,12 +13,12 @@ compliance with the License. You should have received a copy of the Erlang Public License along with this software. If not, it can be retrieved online at http://www.erlang.org/. - + Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for the specific language governing rights and limitations under the License. - + </legalnotice> <title>ms_transform</title> @@ -245,7 +245,7 @@ ets:select(emp_tab, ets:fun2ms( fun(#emp{empno = [$0 | Rest] }) -> {[$0|Rest],[$1|Rest]} end)). </code> - <p>As a matter of fact, this query hit's the feature of partially bound + <p>As a matter of fact, this query hits the feature of partially bound keys in the table type <c>ordered_set</c>, so that not the whole table need be searched, only the part of the table containing keys beginning with <c>0</c> is in fact looked into. </p> diff --git a/lib/stdlib/doc/src/notes.xml b/lib/stdlib/doc/src/notes.xml index c55eafc8b8..940044d0a8 100644 --- a/lib/stdlib/doc/src/notes.xml +++ b/lib/stdlib/doc/src/notes.xml @@ -30,6 +30,539 @@ </header> <p>This document describes the changes made to the STDLIB application.</p> +<section><title>STDLIB 1.17.2</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> When several clients accessed a Dets table + simultaneously, one of them calling + <c>dets:insert_new/2</c>, the Dets server could crash. + Alternatively, under the same conditions, <c>ok</c> was + sometimes returned instead of <c>true</c>. (Thanks to + John Hughes.) </p> + <p> + Own Id: OTP-8856</p> + </item> + <item> + <p> When several clients accessed a Dets table + simultaneously, inserted or updated objects were + sometimes lost due to the Dets file being truncated. + (Thanks to John Hughes.) </p> + <p> + Own Id: OTP-8898</p> + </item> + <item> + <p> When several clients accessed a Dets table + simultaneously, modifications of the Dets server's + internal state were sometimes thrown away. The symptoms + are diverse: error with reason <c>bad_object</c>; + inserted objects not returned by <c>lookup()</c>; et + cetera. (Thanks to John Hughes.) </p> + <p> + Own Id: OTP-8899</p> + </item> + <item> + <p> If a Dets table was closed after calling + <c>bchunk/2</c>, <c>match/1,3</c>, + <c>match_object/1,3</c>, or <c>select/1,3</c> and then + opened again, a subsequent call using the returned + continuation would normally return a reply. This bug has + fixed; now the call fails with reason <c>badarg</c>. </p> + <p> + Own Id: OTP-8903</p> + </item> + <item> + <p> Cover did not collect coverage data for files such as + Yecc parses containing include directives. The bug has + been fixed by modifying <c>epp</c>, the Erlang Code + Preprocessor. </p> + <p> + Own Id: OTP-8911</p> + </item> + <item> + <p> If a Dets table with fewer slots than keys was opened + and then closed after just a lookup, the contents were no + longer well-formed. This bug has been fixed. (Thanks to + Matthew Evans.) </p> + <p> + Own Id: OTP-8923</p> + </item> + <item> + <p> + In a supervisor, when it terminates a child, if that + child happens to have exited fractionally early, with + normal, the supervisor reports this as an error. This + should not be reported as an error.</p> + <p> + *** POTENTIAL INCOMPATIBILITY ***</p> + <p> + Own Id: OTP-8938 Aux Id: seq11615 </p> + </item> + </list> + </section> + + + <section><title>Improvements and New Features</title> + <list> + <item> + <p> + The documentation filelib:wildcard/1,2 now describes the + character set syntax for wildcards.</p> + <p> + Own Id: OTP-8879 Aux Id: seq11683 </p> + </item> + <item> + <p>Buffer overflows have been prevented in <c>erlc</c>, + <c>dialyzer</c>, <c>typer</c>, <c>run_test</c>, + <c>heart</c>, <c>escript</c>, and <c>erlexec</c>.</p> + (Thanks to Michael Santos.) + <p> + Own Id: OTP-8892</p> + </item> + <item> + <p> + Using a float for the number of copies for + <c>string:copies/2</c> resulted in an infinite loop. Now + it will fail with an exception instead. (Thanks to + Michael Santos.)</p> + <p> + Own Id: OTP-8915</p> + </item> + <item> + <p> + New ETS option <c>compressed</c>, to enable a more + compact storage format at the expence of heavier table + operations. For test and evaluation, <c>erl +ec</c> can + be used to force compression on all ETS tables.</p> + <p> + Own Id: OTP-8922 Aux Id: seq11658 </p> + </item> + <item> + <p> The default maximum number of slots of a Dets table + has been changed as to be equal to the maximum number of + slots. (Thanks to Richard Carlsson.) </p> + <p> + Own Id: OTP-8959</p> + </item> + </list> + </section> + +</section> + +<section><title>STDLIB 1.17.1</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p>reference() has been substituted for ref() in the + documentation.</p> + <p> + Own Id: OTP-8733</p> + </item> + </list> + </section> + + + <section><title>Improvements and New Features</title> + <list> + <item> + <p> + The ms_transform now warns if the fun head shadows + surrounding variables (just like the warnings you would + get for an ordinary fun in the same context).</p> + <p> + Own Id: OTP-6759</p> + </item> + <item> + <p> + ets:select_reverse/{1,2,3} are now documented.</p> + <p> + Own Id: OTP-7863</p> + </item> + <item> + <p> + Large parts of the <c>ethread</c> library have been + rewritten. The <c>ethread</c> library is an Erlang + runtime system internal, portable thread library used by + the runtime system itself.</p> + <p> + Most notable improvement is a reader optimized rwlock + implementation which dramatically improve the performance + of read-lock/read-unlock operations on multi processor + systems by avoiding ping-ponging of the rwlock cache + lines. The reader optimized rwlock implementation is used + by miscellaneous rwlocks in the runtime system that are + known to be read-locked frequently, and can be enabled on + ETS tables by passing the <seealso + marker="stdlib:ets#new_2_read_concurrency">{read_concurrency, + true}</seealso> option upon table creation. See the + documentation of <seealso + marker="stdlib:ets#new/2">ets:new/2</seealso> for more + information. The reader optimized rwlock implementation + can be fine tuned when starting the runtime system. For + more information, see the documentation of the <seealso + marker="erts:erl#+rg">+rg</seealso> command line argument + of <c>erl</c>.</p> + <p> + There is also a new implementation of rwlocks that is not + optimized for readers. Both implementations interleaves + readers and writers during contention as opposed to, + e.g., the NPTL (Linux) pthread rwlock implementation + which use either a reader or writer preferred strategy. + The reader/writer preferred strategy is problematic since + it starves threads doing the non-preferred operation.</p> + <p> + The new rwlock implementations in general performs better + in ERTS than common pthread implementations. However, in + some extremely heavily contended cases this is not the + case. Such heavy contention can more or less only appear + on ETS tables. This when multiple processes do very large + amounts of write locked operations simultaneously on the + same table. Such use of ETS is bad regardless of rwlock + implementation, will never scale, and is something we + strongly advise against.</p> + <p> + The new rwlock implementations depend on atomic + operations. If no native atomic implementation is found, + a fallback solution will be used. Using the fallback + implies a performance degradation. That is, it is more + important now than before to build OTP with a native + atomic implementation.</p> + <p> + The <c>ethread</c> library contains native atomic + implementations for, x86 (32 and 64 bit), powerpc (32 + bit), sparc V9 (32 and 64 bit), and tilera (32 bit). On + other hardware gcc's builtin support for atomic memory + access will be used if such exists. If no such support is + found, <c>configure</c> will warn about no atomic + implementation available.</p> + <p> + The <c>ethread</c> library can now also use the + <c>libatomic_ops</c> library for atomic memory accesses. + This makes it possible for the Erlang runtime system to + utilize optimized native atomic operations on more + platforms than before. If <c>configure</c> warns about no + atomic implementation available, try using the + <c>libatomic_ops</c> library. Use the <seealso + marker="doc/installation_guide:INSTALL#How-to-Build-and-Install-ErlangOTP_A-Closer-Look-at-the-individual-Steps_Configuring">--with-libatomic_ops=PATH</seealso> + <c>configure</c> command line argument when specifying + where the <c>libatomic_ops</c> installation is located. + The <c>libatomic_ops</c> library can be downloaded from: + <url + href="http://www.hpl.hp.com/research/linux/atomic_ops/">http://www.hpl.hp.com/research/linux/atomic_ops/</url></p> + <p> + The changed API of the <c>ethread</c> library has also + caused modifications in the Erlang runtime system. + Preparations for the to come "delayed deallocation" + feature has also been done since it depends on the + <c>ethread</c> library.</p> + <p> + <em>Note</em>: When building for x86, the <c>ethread</c> + library will now use instructions that first appeared on + the pentium 4 processor. If you want the runtime system + to be compatible with older processors (back to 486) you + need to pass the <seealso + marker="doc/installation_guide:INSTALL#How-to-Build-and-Install-ErlangOTP_A-Closer-Look-at-the-individual-Steps_Configuring">--enable-ethread-pre-pentium4-compatibility</seealso> + <c>configure</c> command line argument when configuring + the system.</p> + <p> + Own Id: OTP-8544</p> + </item> + <item> + <p> + Some Built In Functions (BIFs) from the module erlang was + never made autoimported for backward compatibility + reasons. As local functions now override autoimports, new + autoimports is no longer a problem, why the following + BIFs are finally made autoimported: monitor/2, monitor/3, + demonitor/2, demonitor/3, error/1, error/2, + integer_to_list/2, list_to_integer/2.</p> + <p> + Own Id: OTP-8763</p> + </item> + </list> + </section> + +</section> + +<section><title>STDLIB 1.17</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p>The Erlang code preprocessor (<c>epp</c>) sent extra + messages on the form <c>{eof,Location}</c> to the client + when parsing the <c>file</c> attribute. This bug, + introduced in R11B, has been fixed.</p> + <p> + Own Id: OTP-8470</p> + </item> + <item> + <p>The abstract type 'fun' could not be printed by the + Erlang pretty printer (<c>erl_pp</c>). This bug has been + fixed.</p> + <p> + Own Id: OTP-8473</p> + </item> + <item> + <p>The function <c>erl_scan:reserved_word/1</c> no longer + returns <c>true</c> when given the word <c>spec</c>. This + bug was introduced in STDLIB-1.15.3 (R12B-3).</p> + <p> + Own Id: OTP-8567</p> + </item> + <item> + <p>The documentation of <c>lists:keysort/2</c> states + that the sort is stable.</p> + <p> + Own Id: OTP-8628 Aux Id: seq11576 </p> + </item> + <item> + <p> + The shell's line editing has been improved to more + resemble the behaviour of readline and other shells. + (Thanks to Dave Peticolas)</p> + <p> + Own Id: OTP-8635</p> + </item> + <item> + <p>The Erlang code preprocessor (<c>epp</c>) did not + correctly handle premature end-of-input when defining + macros. This bug, introduced in STDLIB 1.16, has been + fixed.</p> + <p> + Own Id: OTP-8665 Aux Id: OTP-7810 </p> + </item> + </list> + </section> + + + <section><title>Improvements and New Features</title> + <list> + <item> + <p> + The module binary from EEP31 (and EEP9) is implemented.</p> + <p> + Own Id: OTP-8217</p> + </item> + <item> + <p>The erlang pretty printer (<c>erl_pp</c>) no longer + quotes atoms in types.</p> + <p> + Own Id: OTP-8501</p> + </item> + <item> + <p>The Erlang code preprocessor (<c>epp</c>) now + considers records with no fields as typed.</p> + <p> + Own Id: OTP-8503</p> + </item> + <item> + <p> + Added function <c>zip:foldl/3</c> to iterate over zip + archives.</p> + <p> + Added functions to create and extract escripts. See + <c>escript:create/2</c> and <c>escript:extract/2</c>.</p> + <p> + The undocumented function <c>escript:foldl/3</c> has been + removed. The same functionality can be achieved with the + more flexible functions <c>escript:extract/2</c> and + <c>zip:foldl/3</c>.</p> + <p> + Record fields has been annotated with type info. Source + files as been adapted to fit within 80 chars and trailing + whitespace has been removed.</p> + <p> + Own Id: OTP-8521</p> + </item> + <item> + <p>The Erlang parser no longer duplicates the singleton + type <c>undefined</c> in the type of record fields + without initial value.</p> + <p> + Own Id: OTP-8522</p> + </item> + <item> + <p>A regular expression with many levels of parenthesis + could cause a buffer overflow. That has been corrected. + (Thanks to Michael Santos.)</p> + <p> + Own Id: OTP-8539</p> + </item> + <item> + <p>When defining macros the closing right parenthesis + before the dot is now mandatory.</p> + <p> + *** POTENTIAL INCOMPATIBILITY ***</p> + <p> + Own Id: OTP-8562</p> + </item> + <item> + <p> + Some properties of a compiled re pattern are defined to + allow for guard tests.</p> + <p> + Own Id: OTP-8577</p> + </item> + <item> + <p>Local and imported functions now override the + auto-imported BIFs when the names clash. The pre R14 + behaviour was that auto-imported BIFs would override + local functions. To avoid that old programs change + behaviour, the following will generate an error:</p> + <list><item><p>Doing a call without explicit module name + to a local function having a name clashing with the name + of an auto-imported BIF that was present (and + auto-imported) before OTP R14A</p></item> + <item><p>Explicitly importing a function having a name + clashing with the name of an autoimported BIF that was + present (and autoimported) before OTP R14A</p></item> + <item><p>Using any form of the old compiler directive + <c>nowarn_bif_clash</c></p></item> </list> <p>If the BIF + was added or auto-imported in OTP R14A or later, + overriding it with an import or a local function will + only result in a warning,</p> <p>To resolve clashes, you + can either use the explicit module name <c>erlang</c> to + call the BIF, or you can remove the auto-import of that + specific BIF by using the new compiler directive + <c>-compile({no_auto_import,[F/A]}).</c>, which makes all + calls to the local or imported function without explicit + module name pass without warnings or errors.</p> <p>The + change makes it possible to add auto-imported BIFs + without breaking or silently changing old code in the + future. However some current code ingeniously utilizing + the old behaviour or the <c>nowarn_bif_clash</c> compiler + directive, might need changing to be accepted by the + compiler.</p> + <p> + *** POTENTIAL INCOMPATIBILITY ***</p> + <p> + Own Id: OTP-8579</p> + </item> + <item> + <p>The undocumented, unsupport, and deprecated function + <c>lists:flat_length/1</c> has been removed.</p> + <p> + Own Id: OTP-8584</p> + </item> + <item> + <p> + A bug in re that could cause certain regular expression + matches never to terminate is corrected. (Thanks to + Michael Santos and Gordon Guthrie.)</p> + <p> + Own Id: OTP-8589</p> + </item> + <item> + <p>Nested records can now be accessed without + parenthesis. See the Reference Manual for examples. + (Thanks to YAMASHINA Hio and Tuncer Ayaz.)</p> + <p> + Own Id: OTP-8597</p> + </item> + <item> + <p><c>receive</c> statements that can only read out a + newly created reference are now specially optimized so + that it will execute in constant time regardless of the + number of messages in the receive queue for the process. + That optimization will benefit calls to + <c>gen_server:call()</c>. (See <c>gen:do_call/4</c> for + an example of a receive statement that will be + optimized.)</p> + <p> + Own Id: OTP-8623</p> + </item> + <item> + <p>The beam_lib:cmp/2 function now compares BEAM files in + stricter way. The BEAM files will be considered different + if there are any changes except in the compilation + information ("CInf") chunk. beam_lib:cmp/2 used to ignore + differences in the debug information (significant for + Dialyzer) and other chunks that did not directly change + the run-time behavior.</p> + <p> + Own Id: OTP-8625</p> + </item> + <item> + <p> + When a gen_server, gen_fsm process, or gen_event + terminates abnormally, sometimes the text representation + of the process state can occupy many lines of the error + log, depending on the definition of the state term. A + mechanism to trim out parts of the state from the log has + been added (using a format_status/2 callback). See the + documentation.</p> + <p> + Own Id: OTP-8630</p> + </item> + <item> + <p> + Calling <c>sys:get_status()</c> for processes that have + globally registered names that were not atoms would cause + a crash. Corrected. (Thanks to Steve Vinoski.)</p> + <p> + Own Id: OTP-8656</p> + </item> + <item> + <p>The Erlang scanner has been augmented with two new + tokens: <c>..</c> and <c>...</c>.</p> + <p> + Own Id: OTP-8657</p> + </item> + <item> + <p>Expressions evaluating to integers can now be used in + types and function specifications where hitherto only + integers were allowed ("Erlang_Integer").</p> + <p> + Own Id: OTP-8664</p> + </item> + <item> + <p>The compiler optimizes record operations better.</p> + <p> + Own Id: OTP-8668</p> + </item> + <item> + <p> + The recently added BIFs erlang:min/2, erlang:max/2 and + erlang:port_command/3 are now auto-imported (as they were + originally intended to be). Due to the recent compiler + change (OTP-8579), the only impact on old code defining + it's own min/2, max/2 or port_command/3 functions will be + a warning, the local functions will still be used. The + warning can be removed by using + -compile({no_auto_import,[min/2,max/2,port_command/3]}). + in the source file.</p> + <p> + *** POTENTIAL INCOMPATIBILITY ***</p> + <p> + Own Id: OTP-8669 Aux Id: OTP-8579 </p> + </item> + <item> + <p> + Now, binary_to_term/2 is auto-imported. This will cause a + compile warning if and only if a module has got a local + function with that name.</p> + <p> + *** POTENTIAL INCOMPATIBILITY ***</p> + <p> + Own Id: OTP-8671</p> + </item> + <item> + <p> + The predefined builtin type tid() has been removed. + Instead, ets:tid() should be used.</p> + <p> + *** POTENTIAL INCOMPATIBILITY ***</p> + <p> + Own Id: OTP-8687</p> + </item> + </list> + </section> + +</section> + <section><title>STDLIB 1.16.5</title> <section><title>Fixed Bugs and Malfunctions</title> @@ -50,7 +583,7 @@ <item> <p>A number of bugs concerning re and unicode are corrected:</p> - <p>re:compile no longer looses unicode option, which also + <p>re:compile no longer loses unicode option, which also fixes bug in re:split.</p> <p>re:replace now handles unicode charlist replacement argument</p> diff --git a/lib/stdlib/doc/src/re.xml b/lib/stdlib/doc/src/re.xml index 4d2a0e0995..056e7bc9b9 100644 --- a/lib/stdlib/doc/src/re.xml +++ b/lib/stdlib/doc/src/re.xml @@ -37,29 +37,24 @@ <modulesummary>Perl like regular expressions for Erlang</modulesummary> <description> - <p>This module contains functions for regular expression - matching for strings and binaries.</p> + <p>This module contains regular expression matching functions for + strings and binaries.</p> <p>The regular expression syntax and semantics resemble that of - Perl. This library in many ways replaces the old regexp library - written purely in Erlang, as it has a richer syntax as well as - many more options. The library is also faster than the - older regexp implementation.</p> - - <p>Although the library's matching algorithms are currently based - on the PCRE library, it is not to be viewed as an Erlang to PCRE - mapping. Only parts of the PCRE library is interfaced and the re - library in some ways extend PCRE. The PCRE documentation contains - many parts of no interest to the Erlang programmer, why only the - relevant part of the documentation is included here. There should - bee no need to go directly to the PCRE library documentation.</p> + Perl. This library replaces the deprecated pure-Erlang regexp + library; it has a richer syntax, more options and is faster.</p> + + <p>The library's matching algorithms are currently based on the + PCRE library, but not all of the PCRE library is interfaced and + some parts of the library go beyond what PCRE offers. The sections of + the PCRE documentation which are relevant to this module are included + here.</p> <note> - <p>The Erlang literal syntax for strings give special - meaning to the "\" (backslash) character. To literally write - a regular expression or a replacement string containing a - backslash in your code or in the shell, two backslashes have to be written: - "\\".</p> + <p>The Erlang literal syntax for strings uses the "\" + (backslash) character as an escape code. You need to escape + backslashes in literal strings, both in your code and in the shell, + with an additional backslash, i.e.: "\\".</p> </note> @@ -72,7 +67,7 @@ - a binary is allowed as the tail of the list</code> <code type="none"> unicode_binary() = binary() with characters encoded in UTF-8 coding standard - unicode_char() = integer() representing valid unicode codepoint + unicode_char() = integer() representing a valid unicode codepoint chardata() = charlist() | unicode_binary() @@ -80,7 +75,11 @@ - a unicode_binary is allowed as the tail of the list</code> <code type="none"> - mp() = Opaque datatype containing a compiled regular expression.</code> + mp() = Opaque datatype containing a compiled regular expression. + - The mp() is guaranteed to be a tuple() having the atom + 're_pattern' as its first element, to allow for matching in + guards. The arity of the tuple() or the content of the other fields + may change in future releases.</code> </section> <funcs> <func> @@ -128,7 +127,7 @@ <tag><c>dollar_endonly</c></tag> <item>A dollar metacharacter in the pattern matches only at the end of the subject string. Without this option, a dollar also matches immediately before a newline at the end of the string (but not before any other newlines). The <c>dollar_endonly</c> option is ignored if <c>multiline</c> is given. There is no equivalent option in Perl, and no way to set it within a pattern.</item> <tag><c>dotall</c></tag> - <item>A dot maturate in the pattern matches all characters, including those that indicate newline. Without it, a dot does not match when the current position is at a newline. This option is equivalent to Perl's /s option, and it can be changed within a pattern by a (?s) option setting. A negative class such as [^a] always matches newline characters, independent of the setting of this option.</item> + <item>A dot in the pattern matches all characters, including those that indicate newline. Without it, a dot does not match when the current position is at a newline. This option is equivalent to Perl's /s option, and it can be changed within a pattern by a (?s) option setting. A negative class such as [^a] always matches newline characters, independent of this option's setting.</item> <tag><c>extended</c></tag> <item>Whitespace data characters in the pattern are ignored except when escaped or inside a character class. Whitespace does not include the VT character (ASCII 11). In addition, characters between an unescaped # outside a character class and the next newline, inclusive, are also ignored. This is equivalent to Perl's /x option, and it can be changed within a pattern by a (?x) option setting. @@ -210,9 +209,10 @@ This option makes it possible to include comments inside complicated patterns. N or as a pre compiled <c>mp()</c> in which case it is executed against the subject directly.</p> - <p>When compilation is involved, the exception <c>badarg</c> is thrown if - a compilation error occurs. To locate the error in the regular - expression, use the function <c>re:compile/2</c> to get more information.</p> + <p>When compilation is involved, the exception <c>badarg</c> is + thrown if a compilation error occurs. Call <c>re:compile/2</c> + to get information about the location of the error in the + regular expression.</p> <p>If the regular expression is previously compiled, the option list can only contain the options <c>anchored</c>, @@ -242,7 +242,7 @@ This option makes it possible to include comments inside complicated patterns. N how captured substrings are to be returned (as index tuples, lists or binaries). The <c>capture</c> option makes the function quite flexible and powerful. The different options are described - in detail below</p> + in detail below.</p> <p>If the capture options describe that no substring capturing at all is to be done (<c>{capture, none}</c>), the function will @@ -252,7 +252,7 @@ This option makes it possible to include comments inside complicated patterns. N be done either by specifying <c>none</c> or an empty list as <c>ValueSpec</c>.</p> - <p>A description of all the options relevant for execution follows:</p> + <p>The options relevant for execution are:</p> <taglist> <tag><c>anchored</c></tag> @@ -266,27 +266,25 @@ This option makes it possible to include comments inside complicated patterns. N <tag><c>global</c></tag> <item> - <p>Implements global (repetitive) search as the <c>g</c> flag in - i.e. Perl. Each match found is returned as a separate + <p>Implements global (repetitive) search (the <c>g</c> flag in + Perl). Each match is returned as a separate <c>list()</c> containing the specific match as well as any matching subexpressions (or as specified by the <c>capture option</c>). The <c>Captured</c> part of the return value will - hence be a <c>list()</c> of <c>list()</c>'s when this + hence be a <c>list()</c> of <c>list()</c>s when this option is given.</p> - <p>When the regular expression matches an empty string, the - behaviour might seem non-intuitive, why the behaviour requites - some clarifying. With the global option, <c>re:run/3</c> - handles empty matches in the same way as Perl, meaning that a - match at any point giving an empty string (with length 0) will - be retried with the options - <c>[anchored, notempty]</c> as well. If that - search gives a result of length > 0, the result is included. - An example:</p> + <p>The interaction of the global option with a regular + expression which matches an empty string surprises some users. + When the global option is given, <c>re:run/3</c> handles empty + matches in the same way as Perl: a zero-length match at any + point will be retried with the options <c>[anchored, + notempty]</c> as well. If that search gives a result of length + > 0, the result is included. For example:</p> <code> re:run("cat","(|at)",[global]).</code> - <p>The matching will be performed as following:</p> + <p>The following matching will be performed:</p> <taglist> <tag>At offset <c>0</c></tag> <item>The regexp <c>(|at)</c> will first match at the initial @@ -298,11 +296,11 @@ This option makes it possible to include comments inside complicated patterns. N <item> The search is retried with the options <c>[anchored, notempty]</c> at the same position, which does not give any interesting result of longer - length, why the search position is now advanced to the next + length, so the search position is now advanced to the next character (<c>a</c>).</item> <tag>At offset <c>1</c></tag> - <item>Now the search results in - <c>[{1,0},{1,0}]</c> meaning this search will also be repeated + <item>This time, the search results in + <c>[{1,0},{1,0}]</c>, so this search will also be repeated with the extra options.</item> <tag>At offset <c>1</c> with <c>[anchored, notempty]</c></tag> <item>Now the <c>ab</c> alternative @@ -329,16 +327,17 @@ This option makes it possible to include comments inside complicated patterns. N entire match fails. For example, if the pattern</p> <code> a?b?</code> <p>is applied to a string not beginning with "a" or "b", it - matches the empty string at the start of the subject. With - <c>notempty</c> given, this match is not valid, so re:run/3 searches - further into the string for occurrences of "a" or "b".</p> + would normally match the empty string at the start of the + subject. With the <c>notempty</c> option, this match is not + valid, so re:run/3 searches further into the string for + occurrences of "a" or "b".</p> <p>Perl has no direct equivalent of <c>notempty</c>, but it does make a special case of a pattern match of the empty string within its split() function, and when using the /g modifier. It is possible to emulate Perl's behavior after matching a null string by first trying the match again at the same offset with - <c>notempty</c> and <c>anchored</c>, and then if that fails by + <c>notempty</c> and <c>anchored</c>, and then, if that fails, by advancing the starting offset (see below) and trying an ordinary match again.</p> </item> @@ -348,7 +347,7 @@ This option makes it possible to include comments inside complicated patterns. N string is not the beginning of a line, so the circumflex metacharacter should not match before it. Setting this without <c>multiline</c> (at compile time) causes circumflex never to - match. This option affects only the behavior of the circumflex + match. This option only affects the behavior of the circumflex metacharacter. It does not affect \A.</item> <tag><c>noteol</c></tag> @@ -384,7 +383,7 @@ This option makes it possible to include comments inside complicated patterns. N </taglist> </item> <tag><c>bsr_anycrlf</c></tag> - <item>Specifies specifically that \R is to match only the cr, lf or crlf sequences, not the Unicode specific newline characters.(overrides compilation option)</item> + <item>Specifies specifically that \R is to match only the cr, lf or crlf sequences, not the Unicode specific newline characters. (overrides compilation option)</item> <tag><c>bsr_unicode</c></tag> <item>Specifies specifically that \R is to match all the Unicode newline characters (including crlf etc, the default).(overrides compilation option)</item> @@ -440,7 +439,7 @@ This option makes it possible to include comments inside complicated patterns. N <tag><c>none</c></tag> <item>Do not return matching subpatterns at all, yielding the single atom <c>match</c> as the return value of the function when matching successfully instead of the <c>{match, list()}</c> return. Specifying an empty list gives the same behavior.</item> </taglist> - <p>The value list is a list of indexes for the subpatterns to return, where index 0 is for all of the pattern, and 1 is for the first explicit capturing subpattern in the regular expression, and so forth. When using named captured subpatterns (see below) in the regular expression, one can use <c>atom()</c>'s or <c>string()</c>'s to specify the subpatterns to be returned. This deserves an example, consider the following regular expression:</p> + <p>The value list is a list of indexes for the subpatterns to return, where index 0 is for all of the pattern, and 1 is for the first explicit capturing subpattern in the regular expression, and so forth. When using named captured subpatterns (see below) in the regular expression, one can use <c>atom()</c>s or <c>string()</c>s to specify the subpatterns to be returned. For example, consider the regular expression:</p> <code> ".*(abcd).*"</code> <p>matched against the string ""ABCabcdABC", capturing only the "abcd" part (the first explicit subpattern):</p> <code> re:run("ABCabcdABC",".*(abcd).*",[{capture,[1]}]).</code> @@ -451,7 +450,7 @@ This option makes it possible to include comments inside complicated patterns. N <code> ".*(?<FOO>abcd).*"</code> <p>With this expression, we could still give the index of the subpattern with the following call:</p> <code> re:run("ABCabcdABC",".*(?<FOO>abcd).*",[{capture,[1]}]).</code> - <p>giving the same result as before. But as the subpattern is named, we can also give its name in the value list:</p> + <p>giving the same result as before. But, since the subpattern is named, we can also specify its name in the value list:</p> <code> re:run("ABCabcdABC",".*(?<FOO>abcd).*",[{capture,['FOO']}]).</code> <p>which would yield the same result as the earlier examples, namely:</p> <code> {match,[{3,4}]}</code> @@ -469,15 +468,15 @@ This option makes it possible to include comments inside complicated patterns. N <item><p>Optionally specifies how captured substrings are to be returned. If omitted, the default of <c>index</c> is used. The <c>Type</c> can be one of the following:</p> <taglist> <tag><c>index</c></tag> - <item>Return captured substrings as pairs of byte indexes into the subject string and length of the matching string in the subject (as if the subject string was flattened with <c>iolist_to_binary/1</c> or <c>unicode:characters_to_binary/2</c> prior to matching). Note that the <c>unicode</c> option results in <em>byte-oriented</em> indexes in a (possibly imagined) <em>UTF-8 encoded</em> binary. A byte index tuple <c>{0,2}</c> might therefore represent one or two characters when <c>unicode</c> is in effect. This might seem contra-intuitive, but has been deemed the most effective and useful way to way to do it. To return lists instead might result in simpler code if that is desired. This return type is the default.</item> + <item>Return captured substrings as pairs of byte indexes into the subject string and length of the matching string in the subject (as if the subject string was flattened with <c>iolist_to_binary/1</c> or <c>unicode:characters_to_binary/2</c> prior to matching). Note that the <c>unicode</c> option results in <em>byte-oriented</em> indexes in a (possibly virtual) <em>UTF-8 encoded</em> binary. A byte index tuple <c>{0,2}</c> might therefore represent one or two characters when <c>unicode</c> is in effect. This might seem counter-intuitive, but has been deemed the most effective and useful way to way to do it. To return lists instead might result in simpler code if that is desired. This return type is the default.</item> <tag><c>list</c></tag> - <item>Return matching substrings as lists of characters (Erlang <c>string()</c>'s). It the <c>unicode</c> option is used in combination with the \C sequence in the regular expression, a captured subpattern can contain bytes that has is not valid UTF-8 (\C matches bytes regardless of character encoding). In that case the <c>list</c> capturing may result in the same types of tuples that <c>unicode:characters_to_list/2</c> can return, namely three-tuples with the tag <c>incomplete</c> or <c>error</c>, the successfully converted characters and the invalid UTF-8 tail of the conversion as a binary. The best strategy is to avoid using the \C sequence when capturing lists.</item> + <item>Return matching substrings as lists of characters (Erlang <c>string()</c>s). It the <c>unicode</c> option is used in combination with the \C sequence in the regular expression, a captured subpattern can contain bytes that are not valid UTF-8 (\C matches bytes regardless of character encoding). In that case the <c>list</c> capturing may result in the same types of tuples that <c>unicode:characters_to_list/2</c> can return, namely three-tuples with the tag <c>incomplete</c> or <c>error</c>, the successfully converted characters and the invalid UTF-8 tail of the conversion as a binary. The best strategy is to avoid using the \C sequence when capturing lists.</item> <tag><c>binary</c></tag> - <item>Return matching substrings as binaries. If the <c>unicode</c> option is used, these binaries is in UTF-8. If the \C sequence is used together with <c>unicode</c> the binaries may be invalid UTF-8.</item> + <item>Return matching substrings as binaries. If the <c>unicode</c> option is used, these binaries are in UTF-8. If the \C sequence is used together with <c>unicode</c> the binaries may be invalid UTF-8.</item> </taglist> </item> </taglist> - <p>In general, subpatterns that got assigned no value in the match are returned as the tuple <c>{-1,0}</c> when <c>type</c> is <c>index</c>. Unassigned subpatterns are returned as the empty binary or list respectively for other return types. Consider the regular expression:</p> + <p>In general, subpatterns that were not assigned a value in the match are returned as the tuple <c>{-1,0}</c> when <c>type</c> is <c>index</c>. Unassigned subpatterns are returned as the empty binary or list, respectively, for other return types. Consider the regular expression:</p> <code> ".*((?<FOO>abdd)|a(..d)).*"</code> <p>There are three explicitly capturing subpatterns, where the opening parenthesis position determines the order in the result, hence <c>((?<FOO>abdd)|a(..d))</c> is subpattern index 1, <c>(?<FOO>abdd)</c> is subpattern index 2 and <c>(..d)</c> is subpattern index 3. When matched against the following string:</p> <code> "ABCabcdABC"</code> @@ -529,8 +528,8 @@ This option makes it possible to include comments inside complicated patterns. N <v>NLSpec = cr | crlf | lf | anycrlf | any </v> </type> <desc> - <p>Replaces the matched part of the <c>Subject</c> string with the content of <c>Replacement</c>.</p> - <p>Options are given as to the <c>re:run/3</c> function except that the <c>capture</c> option of <c>re:run/3</c> is not allowed. + <p>Replaces the matched part of the <c>Subject</c> string with the contents of <c>Replacement</c>.</p> + <p>The permissible options are the same as for <c>re:run/3</c>, except that the <c>capture</c> option is not allowed. Instead a <c>{return, ReturnType}</c> is present. The default return type is <c>iodata</c>, constructed in a way to minimize copying. The <c>iodata</c> result can be used directly in many i/o-operations. If a flat <c>list()</c> is desired, specify <c>{return, list}</c> and if a binary is preferred, specify <c>{return, binary}</c>.</p> @@ -540,7 +539,7 @@ This option makes it possible to include comments inside complicated patterns. N a Unicode <c>charlist()</c>. If compilation is done implicitly and the <c>unicode</c> compilation option is given to this function, both the regular expression and the <c>Subject</c> - should be given as valid Unicode <c>charlist()</c>'s.</p> + should be given as valid Unicode <c>charlist()</c>s.</p> <p>The replacement string can contain the special character <c>&</c>, which inserts the whole matching expression in the @@ -550,7 +549,7 @@ This option makes it possible to include comments inside complicated patterns. N generated by the regular expression, nothing is inserted.</p> <p>To insert an <c>&</c> or <c>\</c> in the result, precede it with a <c>\</c>. Note that Erlang already gives a special - meaning to <c>\</c> in literal strings, why a single <c>\</c> + meaning to <c>\</c> in literal strings, so a single <c>\</c> has to be written as <c>"\\"</c> and therefore a double <c>\</c> as <c>"\\\\"</c>. Example:</p> <code> re:replace("abcd","c","[&]",[{return,list}]).</code> @@ -607,7 +606,7 @@ This option makes it possible to include comments inside complicated patterns. N a Unicode <c>charlist()</c>. If compilation is done implicitly and the <c>unicode</c> compilation option is given to this function, both the regular expression and the <c>Subject</c> - should be given as valid Unicode <c>charlist()</c>'s.</p> + should be given as valid Unicode <c>charlist()</c>s.</p> <p>The result is given as a list of "strings", the preferred datatype given in the <c>return</c> option (default iodata).</p> @@ -652,25 +651,25 @@ This option makes it possible to include comments inside complicated patterns. N <p>Here the regular expression matched first the "l", causing "Er" to be the first part in the result. When the regular expression matched, the (only) subexpression was - bound to the "l", why the "l" is inserted + bound to the "l", so the "l" is inserted in the group together with "Er". The next match is of the "n", making "a" the next part to be - returned. As the subexpression is bound to the substring + returned. Since the subexpression is bound to the substring "n" in this case, the "n" is inserted into this group. The last group consists of the rest of the string, as no more matches are found.</p> <p>By default, all parts of the string, including the empty - strings are returned from the function. As an example:</p> + strings, are returned from the function. For example:</p> <code> re:split("Erlang","[lg]",[{return,list}]).</code> - <p>The result will be:</p> + <p>will return:</p> <code> ["Er","an",[]]</code> - <p>as the matching of the "g" in the end of the string + <p>since the matching of the "g" in the end of the string leaves an empty rest which is also returned. This behaviour differs from the default behaviour of the split function in Perl, where empty strings at the end are by default removed. To @@ -697,10 +696,10 @@ This option makes it possible to include comments inside complicated patterns. N <p>Note that the last part is "ang", not "an", as we only specified splitting into two parts, - and the splitting stops when enough parts are given, why the - result differs from that of <c>trim</c>.</p> + and the splitting stops when enough parts are given, which is + why the result differs from that of <c>trim</c>.</p> - <p>More than three parts are not possible with this indata, why</p> + <p>More than three parts are not possible with this indata, so</p> <code> re:split("Erlang","[lg]",[{return,list},{parts,4}]).</code> @@ -741,7 +740,7 @@ This option makes it possible to include comments inside complicated patterns. N the parts of the string matching the subexpressions of the regexp.</p> <p>The return value from the function will in this case be a - <c>list()</c> of <c>list()</c>'s. Each sublist begins with the + <c>list()</c> of <c>list()</c>s. Each sublist begins with the string picked out of the subject string, followed by the parts matching each of the subexpressions in order of occurrence in the regular expression.</p> @@ -778,10 +777,8 @@ This option makes it possible to include comments inside complicated patterns. N <title>PERL LIKE REGULAR EXPRESSIONS SYNTAX</title> <p>The following sections contain reference material for the regular expressions used by this module. The regular expression - reference is taken from the PCRE documentation, but converted as - needed.</p> - <p>The documentation is altered where appropriate and where the re - module behaves differently than the PCRE library.</p> + reference is based on the PCRE documentation, with changes in + cases where the re module behaves differently to the PCRE library.</p> </section> <section><title>PCRE regular expression details</title> diff --git a/lib/stdlib/doc/src/ref_man.xml b/lib/stdlib/doc/src/ref_man.xml index f6ae368e92..85aae6151d 100644 --- a/lib/stdlib/doc/src/ref_man.xml +++ b/lib/stdlib/doc/src/ref_man.xml @@ -4,7 +4,7 @@ <application xmlns:xi="http://www.w3.org/2001/XInclude"> <header> <copyright> - <year>1996</year><year>2009</year> + <year>1996</year><year>2010</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -13,12 +13,12 @@ compliance with the License. You should have received a copy of the Erlang Public License along with this software. If not, it can be retrieved online at http://www.erlang.org/. - + Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for the specific language governing rights and limitations under the License. - + </legalnotice> <title>STDLIB Reference Manual</title> @@ -37,6 +37,7 @@ <xi:include href="array.xml"/> <xi:include href="base64.xml"/> <xi:include href="beam_lib.xml"/> + <xi:include href="binary.xml"/> <xi:include href="c.xml"/> <xi:include href="calendar.xml"/> <xi:include href="dets.xml"/> diff --git a/lib/stdlib/doc/src/sofs.xml b/lib/stdlib/doc/src/sofs.xml index 8c8ae51262..729df1e678 100644 --- a/lib/stdlib/doc/src/sofs.xml +++ b/lib/stdlib/doc/src/sofs.xml @@ -210,7 +210,7 @@ X[i] to Y[i] and S a subset of X[1] × ... × X[n]. The <marker id="multiple_relative_product"></marker><em>multiple - relative product</em> of TR and and S is defined to be the + relative product</em> of TR and S is defined to be the set {z : z = ((x[1], ..., x[n]), (y[1],...,y[n])) for some (x[1], ..., x[n]) in S and for some (x[i], y[i]) in R[i], diff --git a/lib/stdlib/doc/src/supervisor.xml b/lib/stdlib/doc/src/supervisor.xml index c696434d49..45fa0847a8 100644 --- a/lib/stdlib/doc/src/supervisor.xml +++ b/lib/stdlib/doc/src/supervisor.xml @@ -156,7 +156,7 @@ child_spec() = {Id,StartFunc,Restart,Shutdown,Type,Modules} the child process to terminate by calling <c>exit(Child,shutdown)</c> and then wait for an exit signal with reason <c>shutdown</c> back from the child process. If - no exit signal is received within the specified time, + no exit signal is received within the specified number of milliseconds, the child process is unconditionally terminated using <c>exit(Child,kill)</c>.</p> <p>If the child process is another supervisor, <c>Shutdown</c> diff --git a/lib/stdlib/doc/src/sys.xml b/lib/stdlib/doc/src/sys.xml index 10ead62073..8cbfb9387b 100644 --- a/lib/stdlib/doc/src/sys.xml +++ b/lib/stdlib/doc/src/sys.xml @@ -34,7 +34,7 @@ <module>sys</module> <modulesummary>A Functional Interface to System Messages</modulesummary> <description> - <p>This module contains functions for sending system messages used by programs, and messaged used for debugging purposes. + <p>This module contains functions for sending system messages used by programs, and messages used for debugging purposes. </p> <p>Functions used for implementation of processes should also understand system messages such as debugging diff --git a/lib/stdlib/doc/src/timer.xml b/lib/stdlib/doc/src/timer.xml index 0b6807dd6c..1b34e71490 100644 --- a/lib/stdlib/doc/src/timer.xml +++ b/lib/stdlib/doc/src/timer.xml @@ -202,18 +202,33 @@ </func> <func> <name>tc(Module, Function, Arguments) -> {Time, Value}</name> - <fsummary>Measure the real time it takes to evaluate <c>apply(Module, Function, Arguments)</c></fsummary> + <name>tc(Fun, Arguments) -> {Time, Value}</name> + <fsummary>Measure the real time it takes to evaluate <c>apply(Module, + Function, Arguments)</c> or <c>apply(Fun, Arguments)</c></fsummary> <type> <v>Module = Function = atom()</v> + <v>Fun = fun()</v> <v>Arguments = [term()]</v> <v>Time = integer() in microseconds</v> <v>Value = term()</v> </type> <desc> - <p>Evaluates <c>apply(Module, Function, Arguments)</c> and measures - the elapsed real time. Returns <c>{Time, Value}</c>, where - <c>Time</c> is the elapsed real time in <em>microseconds</em>, - and <c>Value</c> is what is returned from the apply.</p> + <p></p> + <taglist> + <tag><c>tc/3</c></tag> + <item> + <p>Evaluates <c>apply(Module, Function, Arguments)</c> and measures + the elapsed real time as reported by <c>now/0</c>. + Returns <c>{Time, Value}</c>, where + <c>Time</c> is the elapsed real time in <em>microseconds</em>, + and <c>Value</c> is what is returned from the apply.</p> + </item> + <tag><c>tc/2</c></tag> + <item> + <p>Evaluates <c>apply(Fun, Arguments)</c>. Otherwise works + like <c>tc/3</c>.</p> + </item> + </taglist> </desc> </func> <func> diff --git a/lib/stdlib/doc/src/unicode_usage.xml b/lib/stdlib/doc/src/unicode_usage.xml index c5bf10b63d..c02ea3cbcb 100644 --- a/lib/stdlib/doc/src/unicode_usage.xml +++ b/lib/stdlib/doc/src/unicode_usage.xml @@ -5,7 +5,7 @@ <header> <copyright> <year>1999</year> - <year>2009</year> + <year>2010</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -143,7 +143,7 @@ en_US.UTF-8</pre> <pre> $ echo <input>$LC_CTYPE</input> en_US.UTF-8</pre> -<p>The LANG or LC_CTYPE setting should be consistent with what the terminal is capable of, there is no portable way for Erlang to ask the actual terminal about it's UTF-8 capacity, we have to rely on the language and character type settings.</p> +<p>The LANG or LC_CTYPE setting should be consistent with what the terminal is capable of, there is no portable way for Erlang to ask the actual terminal about its UTF-8 capacity, we have to rely on the language and character type settings.</p> <p>To investigate what Erlang thinks about the terminal, the <c>io:getopts()</c> call can be used when the shell is started:</p> <pre> $ <input>LC_CTYPE=en_US.ISO-8859-1 erl</input> @@ -168,6 +168,48 @@ Eshell V5.7 (abort with ^G) <image file="ushell2.gif"><icaption>Unicode characters in allowed and disallowed context</icaption></image> </section> <section> +<title>Unicode file names</title> +<p>Most modern operating systems support Unicode file names in some way or another. There are several different ways to do this and Erlang by default treats the different approaches differently:</p> +<taglist> +<tag>Mandatory Unicode file naming</tag> +<item> +<p>Windows and, for most common uses, MacOSX enforces Unicode support for file names. All files created in the filesystem has names that can consistently be interpreted. In MacOSX, all file names are retrieved in UTF-8 encoding, while Windows have selected an approach where each system call handling file names has a special Unicode aware variant, giving much the same effect. There are no file names on these systems that are not Unicode file names, why the default behavior of the Erlang VM is to work in "Unicode file name translation mode", meaning that a file name can be given as a Unicode list and that will be automatically translated to the proper name encoding for the underlying operating and file system.</p> +<p>Doing i.e. a <c>file:list_dir/1</c> on one of these systems may return Unicode lists with codepoints beyond 255, depending on the content of the actual filesystem.</p> +<p>As the feature is fairly new, you may still stumble upon non core applications that cannot handle being provided with file names containing characters with codepoints larger than 255, but the core Erlang system should have no problems with Unicode file names.</p> +</item> +<tag>Transparent file naming</tag> +<item> +<p>Most Unix operating systems have adopted a simpler approach, namely that Unicode file naming is not enforced, but by convention. Those systems usually use UTF-8 encoding for Unicode file names, but do not enforce it. On such a system, a file name containing characters having codepoints between 128 and 255 may be named either as plain ISO-latin-1 or using UTF-8 encoding. As no consistency is enforced, the Erlang VM can do no consistent translation of all file names. If the VM would automatically select encoding based on heuristics, one could get unexpected behavior on these systems, therefore file names not being encoded in UTF-8 are returned as "raw file names" if Unicode file naming support is turned on.</p> +<p>A raw file name is not a list, but a binary. Many non core applications still does not handle file names given as binaries, why such raw names are avoided by default. This means that systems having implemented Unicode file naming through transparent file systems and an UTF-8 convention, does not by default have Unicode file naming turned on. Explicitly turning Unicode file name handling on for these types of systems is considered experimental.</p> +</item> +</taglist> +<p>The Unicode file naming support was introduced with OTP release R14B01. A VM operating in Unicode file mode can work with files having names in any language or character set (as long as it's supported by the underlying OS and file system). The Unicode character list is used to denote file or directory names and if the file system content is listed, you will also be able to get Unicode lists as return value. The support lies in the kernel and stdlib modules, why most applications (that does not explicitly require the file names to be in the ISO-latin-1 range) will benefit from the Unicode support without change.</p> + +<p>On Operating systems with mandatory Unicode file names, this means that you more easily conform to the file names of other (non Erlang) applications, and you can also process file names that, at least on Windows, where completely inaccessible (due to having names that could not be represented in ISO-latin-1). Also you will avoid creating incomprehensible file names on MacOSX as the vfs layer of the OS will accept all your file names as UTF-8 and will not rewrite them.</p> + +<p>For most systems, turning on Unicode file name translation is no problem even if it uses transparent file naming. Very few systems have mixed file name encodings. A consistent UTF-8 named system will work perfectly in Unicode file name mode. It is still however considered experimental in R14B01. Unicode file name translation is turned on with the <c>+fnu</c> switch to the <c>erl</c> program. If the VM is started in Unicode file name translation mode, <c>file:native_name_encoding/0</c> will return the atom <c>utf8</c>.</p> + +<p>In Unicode file name mode, file names given to the BIF <c>open_port/2</c> with the option <c>{spawn_executable,...}</c> are also interpreted as Unicode. So is the parameter list given in the <c>args</c> option available when using <c>spawn_executable</c>. The UTF-8 translation of arguments can be avoided using binaries, see the discussion about raw file names below.</p> + +<p>It is worth noting that the file <c>encoding</c> options given when opening a file has nothing to do with the file <em>name</em> encoding convention. You can very well open files containing UTF-8 but having file names in ISO-latin-1 or vice versa.</p> + +<note>Erlang drivers and NIF shared objects still can not be named with names containing codepoints beyond 127. This is a known limitation to be removed in a future release. Erlang modules however can, but it is definitely not a good idea and is still considered experimental.</note> + +<section> +<title>Notes about raw file names and automatic file name conversion</title> +<p>Raw file names is introduced together with Unicode file name support in erts-5.8.2 (OTP R14B01). The reason the "raw file names" is introduced in the system is to be able to consistently represent file names given in different encodings on the same system. Having the VM automatically translate a file name that is not in UTF-8 when to a list of Unicode characters might seem practical, but this would open up for both duplicate file names and other inconsistent behavior. Consider a directory containing a file named "bj�rn" in ISO-latin-1, while the Erlang VM is operating in Unicode file name mode (and therefore expecting UTF-8 file naming). The ISO-latin-1 name is not valid UTF-8 and one could be tempted to think that automatic conversion in for example <c>file:list_dir/1</c> is a good idea. But what would happen if we later tried to open the file and has the name as a Unicode list (magically converted from the ISO-latin-1 file name)? The VM will convert the file name given to UTF-8, as this is the encoding expected. Effectively this means trying to open the file named <<"bj�rn"/utf8>>. This file does not exist, and even if it existed it would not be the same file as the one that was listed. We could even create two files named "bj�rn", one named in the UTF-8 encoding and one not. If <c>file:list_dir/1</c> would automatically convert the ISO-latin-1 file name to a list, we would get two identical file names as the result. To avoid this, we need to differentiate between file names being properly encoded according to the Unicode file naming convention (i.e. UTF-8) and file names being invalid under the encoding. This is done by representing invalid encoding as "raw" file names, i.e. as binaries.</p> +<p>The core system of Erlang (kernel and stdlib) accept raw file names except for loadable drivers and executables invoked using <c>open_port({spawn, ...} ...)</c>. <c>open_port({spawn_executable, ...} ...)</c> however does accept them. As mentioned earlier, the arguments given in the option list to <c>open_port({spawn_executable, ...} ...)</c> undergo the same conversion as the file names, meaning that the executable will be provided with arguments in UTF-8 as well. This translation is avoided consistently with how the file names are treated, by giving the argument as a binary.</p> +<p>To force Unicode file name translation mode on systems where this is not the default is considered experimental in OTP R14B01 due to the raw file names possibly being a new experience to the programmer and that the non core applications of OTP are not tested for compliance with raw file names yet. Unicode file name translation is expected to be default in future releases.</p> +<p>If working with raw file names, one can still conform to the encoding convention of the Erlang VM by using the <c>file:native_name_encoding/0</c> function, which returns either the atom <c>latin1</c> or the atom <c>utf8</c> depending on the file name translation mode. On Linux, an VM started without explicitly stating the file name translation mode will default to <c>latin1</c> as the native file name encoding, why file names on the disk encoded as UTF-8 will be returned as a list of the names interpreted as ISO-latin-1. The "UTF-8 list" is not a practical type for displaying or operating on in Erlang, but it is backward compatible and usable in all functions requiring a file name. On Windows and MacOSX, the default behavior is that of file name translation, why the <c>file:native_name_encoding/0</c> by default returns <c>utf8</c> on those systems (the fact that Windows actually does not use UTF-8 on the file system level can safely be ignored by the Erlang programmer). The default behavior can be changed using the <c>+fnu</c> or <c>+fnl</c> options to the VM, see the <c>erl</c> command manual page.</p> +<p>Even if you are operating without Unicode file naming translation automatically done by the VM, you can access and create files with names in UTF-8 encoding by using raw file names encoded as UTF-8. Enforcing the UTF-8 encoding regardless of the mode the Erlang VM is started in might, in some circumstances be a good idea, as the convention of using UTF-8 file names is spreading.</p> +</section> +<section> +<title>Notes about MacOSX</title> +<p>MacOSXs vfs layer enforces UTF-8 file names in a quite aggressive way. Older versions did this by simply refusing to create non UTF-8 conforming file names, while newer versions replace offending bytes with the sequence "%HH", where HH is the original character in hexadecimal notation. As Unicode translation is enabled by default on MacOSX, the only way to come up against this is to either start the VM with the <c>+fnl</c> flag or to use a raw file name in <c>latin1</c> encoding. In that case, the file can not be opened with the same name as the one used to create this. The problem is by design in newer versions of MacOSX.</p> +<p>MacOSX also reorganizes the names of files so that the representation of accents etc is denormalized, i.e. the character <c>�</c> is represented as the codepoints [111,776], where 111 is the character <c>o</c> and 776 is a special accent character. This type of denormalized Unicode is otherwise very seldom used and Erlang normalizes those file names on retrieval, so that denormalized file names is not passed up to the Erlang application. In Erlang the file name "bj�rn" is retrieved as [98,106,246,114,110], not as [98,106,117,776,114,110], even though the file system might think differently.</p> +</section> +</section> +<section> <title>Unicode-aware modules</title> <p>Most of the modules in Erlang/OTP are of course Unicode-unaware in the sense that they have no notion of Unicode and really shouldn't have. Typically they handle non-textual or byte-oriented data (like <c>gen_tcp</c> etc).</p> <p>Modules that actually handle textual data (like <c>io_lib</c>, <c>string</c> etc) are sometimes subject to conversion or extension to be able to handle Unicode characters.</p> @@ -185,7 +227,7 @@ Eshell V5.7 (abort with ^G) <tag><c>file</c>, <c>group</c> and <c>user</c></tag> <item> <p>I/O-servers throughout the system are able both to handle Unicode data and has options for converting data upon actual output or input to/from the device. As shown earlier, the <seealso marker="stdlib:shell">shell</seealso> has support for Unicode terminals and the <seealso marker="kernel:file">file</seealso> module allows for translation to and from various Unicode formats on disk.</p> -<p>The actual reading and writing of files with Unicode data is however not best done with the <c>file</c> module as it's interface is byte oriented. A file opened with a Unicode encoding (like UTF-8), is then best read or written using the <seealso marker="stdlib:io">io</seealso> module.</p> +<p>The actual reading and writing of files with Unicode data is however not best done with the <c>file</c> module as its interface is byte oriented. A file opened with a Unicode encoding (like UTF-8), is then best read or written using the <seealso marker="stdlib:io">io</seealso> module.</p> </item> <tag><c>re</c></tag> <item> diff --git a/lib/stdlib/doc/src/zip.xml b/lib/stdlib/doc/src/zip.xml index e2ecfec8f0..4d98a20206 100644 --- a/lib/stdlib/doc/src/zip.xml +++ b/lib/stdlib/doc/src/zip.xml @@ -4,7 +4,7 @@ <erlref> <header> <copyright> - <year>2006</year><year>2009</year> + <year>2006</year><year>2010</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -13,12 +13,12 @@ compliance with the License. You should have received a copy of the Erlang Public License along with this software. If not, it can be retrieved online at http://www.erlang.org/. - + Software distributed under the License is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the License for the specific language governing rights and limitations under the License. - + </legalnotice> <title>zip</title> @@ -42,16 +42,18 @@ <p>By convention, the name of a zip file should end in "<c>.zip</c>". To abide to the convention, you'll need to add "<c>.zip</c>" yourself to the name.</p> - <p>Zip archives are created with the - <seealso marker="#zip_2">zip/2</seealso> or the + <p>Zip archives are created with the + <seealso marker="#zip_2">zip/2</seealso> or the <seealso marker="#zip_2">zip/3</seealso> function. (They are also available as <c>create</c>, to resemble the <c>erl_tar</c> module.)</p> - <p>To extract files from a zip archive, use the - <seealso marker="#unzip_1">unzip/1</seealso> or the + <p>To extract files from a zip archive, use the + <seealso marker="#unzip_1">unzip/1</seealso> or the <seealso marker="#unzip_2">unzip/2</seealso> function. (They are also available as <c>extract</c>.)</p> - <p>To return a list of the files in a zip archive, use the + <p>To fold a function over all files in a zip archive, use the + <seealso marker="#foldl_3">foldl_3</seealso>.</p> + <p>To return a list of the files in a zip archive, use the <seealso marker="#list_dir_1">list_dir/1</seealso> or the <seealso marker="#list_dir_2">list_dir/2</seealso> function. (They are also available as <c>table</c>.)</p> @@ -132,7 +134,7 @@ zip_file() </code> <type> <v>Name = filename()</v> <v>FileList = [FileSpec]</v> - <v>FileSpec = filename() | {filename(), binary()}</v> + <v>FileSpec = filename() | {filename(), binary()} | {filename(), binary(), #file_info{}}</v> <v>Options = [Option]</v> <v>Option = memory | cooked | verbose | {comment, Comment} | {cwd, CWD} | {compress, What} | {uncompress, What}</v> <v>What = all | [Extension] | {add, [Extension]} | {del, [Extension]}</v> @@ -212,16 +214,16 @@ zip_file() </code> <taglist> <tag><c>all</c></tag> <item><p> means that all files will be compressed (as long - as they pass the <c>uncompress</c> condition).</p></item> + as they pass the <c>uncompress</c> condition).</p></item> <tag><c>[Extension]</c></tag> <item><p>means that only files with exactly these extensions - will be compressed.</p></item> + will be compressed.</p></item> <tag><c>{add,[Extension]}</c></tag> <item><p>adds these extensions to the list of compress - extensions.</p></item> + extensions.</p></item> <tag><c>{del,[Extension]}</c></tag> <item><p>deletes these extensions from the list of compress - extensions.</p></item> + extensions.</p></item> </taglist> </item> <tag><c>{uncompress, What}</c></tag> @@ -231,16 +233,16 @@ zip_file() </code> The following values of <c>What</c> are allowed:</p> <taglist> <tag><c>all</c></tag> - <item><p> means that no files will be compressed.</p></item> + <item><p> means that no files will be compressed.</p></item> <tag><c>[Extension]</c></tag> <item><p>means that files with these extensions will be - uncompressed.</p></item> + uncompressed.</p></item> <tag><c>{add,[Extension]}</c></tag> <item><p>adds these extensions to the list of uncompress - extensions.</p></item> + extensions.</p></item> <tag><c>{del,[Extension]}</c></tag> <item><p>deletes these extensions from the list of uncompress - extensions.</p></item> + extensions.</p></item> </taglist> </item> </taglist> @@ -283,7 +285,7 @@ zip_file() </code> the <c>unzip/2</c> function will only extract the files whose names are included in <c>FileList</c>. The full paths, including the names of all sub directories within - the zip archive, must be specified.</p> + the zip archive, must be specified.</p> </item> <tag><c>cooked</c></tag> <item> @@ -327,6 +329,64 @@ zip_file() </code> </desc> </func> <func> + <name>foldl(Fun, Acc0, Archive) -> {ok, Acc1} | {error, Reason}</name> + <fsummary>Fold a function over all files in a zip archive</fsummary> + <type> + <v>Fun = fun(FileInArchive, GetInfo, GetBin, AccIn) -> AccOut</v> + <v>FileInArchive = filename()</v> + <v>GetInfo = fun() -> #file_info{}</v> + <v>GetBin = fun() -> binary()</v> + <v>Acc0 = Acc1 = AccIn = AccOut = term()</v> + <v>Archive = filename() | {filename(), binary()}</v> + </type> + <desc> + <p>The <marker id="foldl_3"></marker> <c>foldl/3</c> function + calls <c>Fun(FileInArchive, GetInfo, GetBin, AccIn)</c> on + successive files in the <c>Archive</c>, starting with <c>AccIn + == Acc0</c>. <c>FileInArchive</c> is the name that the file + has in the archive. <c>GetInfo</c> is a fun that returns info + about the the file. <c>GetBin</c> returns the contents of the + file. Both <c>GetInfo</c> and <c>GetBin</c> must be called + within the <c>Fun</c>. Their behavior is undefined if they are + called outside the context of the <c>Fun</c>. The <c>Fun</c> + must return a new accumulator which is passed to the next + call. <c>foldl/3</c> returns the final value of the + accumulator. <c>Acc0</c> is returned if the archive is + empty. It is not necessary to iterate over all files in the + archive. The iteration may be ended prematurely in a + controlled manner by throwing an exception.</p> + + <p>For example:</p> + <pre> +> <input>Name = "dummy.zip".</input> +"dummy.zip" +> <input>{ok, {Name, Bin}} = zip:create(Name, [{"foo", <<"FOO">>}, {"bar", <<"BAR">>}], [memory]).</input> +{ok,{"dummy.zip", + <<80,75,3,4,20,0,0,0,0,0,74,152,97,60,171,39,212,26,3,0, + 0,0,3,0,0,...>>}} +> <input>{ok, FileSpec} = zip:foldl(fun(N, I, B, Acc) -> [{N, B(), I()} | Acc] end, [], {Name, Bin}).</input> +{ok,[{"bar",<<"BAR">>, + {file_info,3,regular,read_write, + {{2010,3,1},{19,2,10}}, + {{2010,3,1},{19,2,10}}, + {{2010,3,1},{19,2,10}}, + 54,1,0,0,0,0,0}}, + {"foo",<<"FOO">>, + {file_info,3,regular,read_write, + {{2010,3,1},{19,2,10}}, + {{2010,3,1},{19,2,10}}, + {{2010,3,1},{19,2,10}}, + 54,1,0,0,0,0,0}}]} +> <input>{ok, {Name, Bin}} = zip:create(Name, lists:reverse(FileSpec), [memory]).</input> +{ok,{"dummy.zip", + <<80,75,3,4,20,0,0,0,0,0,74,152,97,60,171,39,212,26,3,0, + 0,0,3,0,0,...>>}} +> <input>catch zip:foldl(fun("foo", _, B, _) -> throw(B()); (_, _, _, Acc) -> Acc end, [], {Name, Bin}). </input> +<<"FOO">> +</pre> + </desc> + </func> + <func> <name>list_dir(Archive) -> RetValue</name> <name>list_dir(Archive, Options)</name> <name>table(Archive) -> RetValue</name> |