diff options
Diffstat (limited to 'lib/stdlib')
| -rw-r--r-- | lib/stdlib/src/erl_posix_msg.erl | 285 |
1 files changed, 144 insertions, 141 deletions
diff --git a/lib/stdlib/src/erl_posix_msg.erl b/lib/stdlib/src/erl_posix_msg.erl index fe981b23a7..909cc1d102 100644 --- a/lib/stdlib/src/erl_posix_msg.erl +++ b/lib/stdlib/src/erl_posix_msg.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 1997-2009. All Rights Reserved. +%% Copyright Ericsson AB 1997-2010. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -24,143 +24,146 @@ -spec message(atom()) -> string(). -message(e2big) -> "argument list too long"; -message(eacces) -> "permission denied"; -message(eaddrinuse) -> "address already in use"; -message(eaddrnotavail) -> "can't assign requested address"; -message(eadv) -> "advertise error"; -message(eafnosupport) -> "address family not supported by protocol family"; -message(eagain) -> "resource temporarily unavailable"; -message(ealign) -> "EALIGN"; -message(ealready) -> "operation already in progress"; -message(ebade) -> "bad exchange descriptor"; -message(ebadf) -> "bad file number"; -message(ebadfd) -> "file descriptor in bad state"; -message(ebadmsg) -> "not a data message"; -message(ebadr) -> "bad request descriptor"; -message(ebadrpc) -> "RPC structure is bad"; -message(ebadrqc) -> "bad request code"; -message(ebadslt) -> "invalid slot"; -message(ebfont) -> "bad font file format"; -message(ebusy) -> "file busy"; -message(echild) -> "no children"; -message(echrng) -> "channel number out of range"; -message(ecomm) -> "communication error on send"; -message(econnaborted) -> "software caused connection abort"; -message(econnrefused) -> "connection refused"; -message(econnreset) -> "connection reset by peer"; -message(edeadlk) -> "resource deadlock avoided"; -message(edeadlock) -> "resource deadlock avoided"; -message(edestaddrreq) -> "destination address required"; -message(edirty) -> "mounting a dirty fs w/o force"; -message(edom) -> "math argument out of range"; -message(edotdot) -> "cross mount point"; -message(edquot) -> "disk quota exceeded"; -message(eduppkg) -> "duplicate package name"; -message(eexist) -> "file already exists"; -message(efault) -> "bad address in system call argument"; -message(efbig) -> "file too large"; -message(ehostdown) -> "host is down"; -message(ehostunreach) -> "host is unreachable"; -message(eidrm) -> "identifier removed"; -message(einit) -> "initialization error"; -message(einprogress) -> "operation now in progress"; -message(eintr) -> "interrupted system call"; -message(einval) -> "invalid argument"; -message(eio) -> "I/O error"; -message(eisconn) -> "socket is already connected"; -message(eisdir) -> "illegal operation on a directory"; -message(eisnam) -> "is a name file"; -message(elbin) -> "ELBIN"; -message(el2hlt) -> "level 2 halted"; -message(el2nsync) -> "level 2 not synchronized"; -message(el3hlt) -> "level 3 halted"; -message(el3rst) -> "level 3 reset"; -message(elibacc) -> "can not access a needed shared library"; -message(elibbad) -> "accessing a corrupted shared library"; -message(elibexec) -> "can not exec a shared library directly"; -message(elibmax) -> - "attempting to link in more shared libraries than system limit"; -message(elibscn) -> ".lib section in a.out corrupted"; -message(elnrng) -> "link number out of range"; -message(eloop) -> "too many levels of symbolic links"; -message(emfile) -> "too many open files"; -message(emlink) -> "too many links"; -message(emsgsize) -> "message too long"; -message(emultihop) -> "multihop attempted"; -message(enametoolong) -> "file name too long"; -message(enavail) -> "not available"; -message(enet) -> "ENET"; -message(enetdown) -> "network is down"; -message(enetreset) -> "network dropped connection on reset"; -message(enetunreach) -> "network is unreachable"; -message(enfile) -> "file table overflow"; -message(enoano) -> "anode table overflow"; -message(enobufs) -> "no buffer space available"; -message(enocsi) -> "no CSI structure available"; -message(enodata) -> "no data available"; -message(enodev) -> "no such device"; -message(enoent) -> "no such file or directory"; -message(enoexec) -> "exec format error"; -message(enolck) -> "no locks available"; -message(enolink) -> "link has be severed"; -message(enomem) -> "not enough memory"; -message(enomsg) -> "no message of desired type"; -message(enonet) -> "machine is not on the network"; -message(enopkg) -> "package not installed"; -message(enoprotoopt) -> "bad proocol option"; -message(enospc) -> "no space left on device"; -message(enosr) -> "out of stream resources or not a stream device"; -message(enosym) -> "unresolved symbol name"; -message(enosys) -> "function not implemented"; -message(enotblk) -> "block device required"; -message(enotconn) -> "socket is not connected"; -message(enotdir) -> "not a directory"; -message(enotempty) -> "directory not empty"; -message(enotnam) -> "not a name file"; -message(enotsock) -> "socket operation on non-socket"; -message(enotsup) -> "operation not supported"; -message(enotty) -> "inappropriate device for ioctl"; -message(enotuniq) -> "name not unique on network"; -message(enxio) -> "no such device or address"; -message(eopnotsupp) -> "operation not supported on socket"; -message(eperm) -> "not owner"; -message(epfnosupport) -> "protocol family not supported"; -message(epipe) -> "broken pipe"; -message(eproclim) -> "too many processes"; -message(eprocunavail) -> "bad procedure for program"; -message(eprogmismatch) -> "program version wrong"; -message(eprogunavail) -> "RPC program not available"; -message(eproto) -> "protocol error"; -message(eprotonosupport) -> "protocol not suppored"; -message(eprototype) -> "protocol wrong type for socket"; -message(erange) -> "math result unrepresentable"; -message(erefused) -> "EREFUSED"; -message(eremchg) -> "remote address changed"; -message(eremdev) -> "remote device"; -message(eremote) -> "pathname hit remote file system"; -message(eremoteio) -> "remote i/o error"; -message(eremoterelease) -> "EREMOTERELEASE"; -message(erofs) -> "read-only file system"; -message(erpcmismatch) -> "RPC version is wrong"; -message(erremote) -> "object is remote"; -message(eshutdown) -> "can't send after socket shutdown"; -message(esocktnosupport) -> "socket type not supported"; -message(espipe) -> "invalid seek"; -message(esrch) -> "no such process"; -message(esrmnt) -> "srmount error"; -message(estale) -> "stale remote file handle"; -message(esuccess) -> "Error 0"; -message(etime) -> "timer expired"; -message(etimedout) -> "connection timed out"; -message(etoomanyrefs) -> "too many references: can't splice"; -message(etxtbsy) -> "text file or pseudo-device busy"; -message(euclean) -> "structure needs cleaning"; -message(eunatch) -> "protocol driver not attached"; -message(eusers) -> "too many users"; -message(eversion) -> "version mismatch"; -message(ewouldblock) -> "operation would block"; -message(exdev) -> "cross-domain link"; -message(exfull) -> "message tables full"; -message(nxdomain) -> "non-existing domain"; -message(_) -> "unknown POSIX error". +message(T) -> + binary_to_list(message_1(T)). + +message_1(e2big) -> <<"argument list too long">>; +message_1(eacces) -> <<"permission denied">>; +message_1(eaddrinuse) -> <<"address already in use">>; +message_1(eaddrnotavail) -> <<"can't assign requested address">>; +message_1(eadv) -> <<"advertise error">>; +message_1(eafnosupport) -> <<"address family not supported by protocol family">>; +message_1(eagain) -> <<"resource temporarily unavailable">>; +message_1(ealign) -> <<"EALIGN">>; +message_1(ealready) -> <<"operation already in progress">>; +message_1(ebade) -> <<"bad exchange descriptor">>; +message_1(ebadf) -> <<"bad file number">>; +message_1(ebadfd) -> <<"file descriptor in bad state">>; +message_1(ebadmsg) -> <<"not a data message">>; +message_1(ebadr) -> <<"bad request descriptor">>; +message_1(ebadrpc) -> <<"RPC structure is bad">>; +message_1(ebadrqc) -> <<"bad request code">>; +message_1(ebadslt) -> <<"invalid slot">>; +message_1(ebfont) -> <<"bad font file format">>; +message_1(ebusy) -> <<"file busy">>; +message_1(echild) -> <<"no children">>; +message_1(echrng) -> <<"channel number out of range">>; +message_1(ecomm) -> <<"communication error on send">>; +message_1(econnaborted) -> <<"software caused connection abort">>; +message_1(econnrefused) -> <<"connection refused">>; +message_1(econnreset) -> <<"connection reset by peer">>; +message_1(edeadlk) -> <<"resource deadlock avoided">>; +message_1(edeadlock) -> <<"resource deadlock avoided">>; +message_1(edestaddrreq) -> <<"destination address required">>; +message_1(edirty) -> <<"mounting a dirty fs w/o force">>; +message_1(edom) -> <<"math argument out of range">>; +message_1(edotdot) -> <<"cross mount point">>; +message_1(edquot) -> <<"disk quota exceeded">>; +message_1(eduppkg) -> <<"duplicate package name">>; +message_1(eexist) -> <<"file already exists">>; +message_1(efault) -> <<"bad address in system call argument">>; +message_1(efbig) -> <<"file too large">>; +message_1(ehostdown) -> <<"host is down">>; +message_1(ehostunreach) -> <<"host is unreachable">>; +message_1(eidrm) -> <<"identifier removed">>; +message_1(einit) -> <<"initialization error">>; +message_1(einprogress) -> <<"operation now in progress">>; +message_1(eintr) -> <<"interrupted system call">>; +message_1(einval) -> <<"invalid argument">>; +message_1(eio) -> <<"I/O error">>; +message_1(eisconn) -> <<"socket is already connected">>; +message_1(eisdir) -> <<"illegal operation on a directory">>; +message_1(eisnam) -> <<"is a name file">>; +message_1(elbin) -> <<"ELBIN">>; +message_1(el2hlt) -> <<"level 2 halted">>; +message_1(el2nsync) -> <<"level 2 not synchronized">>; +message_1(el3hlt) -> <<"level 3 halted">>; +message_1(el3rst) -> <<"level 3 reset">>; +message_1(elibacc) -> <<"can not access a needed shared library">>; +message_1(elibbad) -> <<"accessing a corrupted shared library">>; +message_1(elibexec) -> <<"can not exec a shared library directly">>; +message_1(elibmax) -> + <<"attempting to link in more shared libraries than system limit">>; +message_1(elibscn) -> <<".lib section in a.out corrupted">>; +message_1(elnrng) -> <<"link number out of range">>; +message_1(eloop) -> <<"too many levels of symbolic links">>; +message_1(emfile) -> <<"too many open files">>; +message_1(emlink) -> <<"too many links">>; +message_1(emsgsize) -> <<"message too long">>; +message_1(emultihop) -> <<"multihop attempted">>; +message_1(enametoolong) -> <<"file name too long">>; +message_1(enavail) -> <<"not available">>; +message_1(enet) -> <<"ENET">>; +message_1(enetdown) -> <<"network is down">>; +message_1(enetreset) -> <<"network dropped connection on reset">>; +message_1(enetunreach) -> <<"network is unreachable">>; +message_1(enfile) -> <<"file table overflow">>; +message_1(enoano) -> <<"anode table overflow">>; +message_1(enobufs) -> <<"no buffer space available">>; +message_1(enocsi) -> <<"no CSI structure available">>; +message_1(enodata) -> <<"no data available">>; +message_1(enodev) -> <<"no such device">>; +message_1(enoent) -> <<"no such file or directory">>; +message_1(enoexec) -> <<"exec format error">>; +message_1(enolck) -> <<"no locks available">>; +message_1(enolink) -> <<"link has be severed">>; +message_1(enomem) -> <<"not enough memory">>; +message_1(enomsg) -> <<"no message of desired type">>; +message_1(enonet) -> <<"machine is not on the network">>; +message_1(enopkg) -> <<"package not installed">>; +message_1(enoprotoopt) -> <<"bad proocol option">>; +message_1(enospc) -> <<"no space left on device">>; +message_1(enosr) -> <<"out of stream resources or not a stream device">>; +message_1(enosym) -> <<"unresolved symbol name">>; +message_1(enosys) -> <<"function not implemented">>; +message_1(enotblk) -> <<"block device required">>; +message_1(enotconn) -> <<"socket is not connected">>; +message_1(enotdir) -> <<"not a directory">>; +message_1(enotempty) -> <<"directory not empty">>; +message_1(enotnam) -> <<"not a name file">>; +message_1(enotsock) -> <<"socket operation on non-socket">>; +message_1(enotsup) -> <<"operation not supported">>; +message_1(enotty) -> <<"inappropriate device for ioctl">>; +message_1(enotuniq) -> <<"name not unique on network">>; +message_1(enxio) -> <<"no such device or address">>; +message_1(eopnotsupp) -> <<"operation not supported on socket">>; +message_1(eperm) -> <<"not owner">>; +message_1(epfnosupport) -> <<"protocol family not supported">>; +message_1(epipe) -> <<"broken pipe">>; +message_1(eproclim) -> <<"too many processes">>; +message_1(eprocunavail) -> <<"bad procedure for program">>; +message_1(eprogmismatch) -> <<"program version wrong">>; +message_1(eprogunavail) -> <<"RPC program not available">>; +message_1(eproto) -> <<"protocol error">>; +message_1(eprotonosupport) -> <<"protocol not suppored">>; +message_1(eprototype) -> <<"protocol wrong type for socket">>; +message_1(erange) -> <<"math result unrepresentable">>; +message_1(erefused) -> <<"EREFUSED">>; +message_1(eremchg) -> <<"remote address changed">>; +message_1(eremdev) -> <<"remote device">>; +message_1(eremote) -> <<"pathname hit remote file system">>; +message_1(eremoteio) -> <<"remote i/o error">>; +message_1(eremoterelease) -> <<"EREMOTERELEASE">>; +message_1(erofs) -> <<"read-only file system">>; +message_1(erpcmismatch) -> <<"RPC version is wrong">>; +message_1(erremote) -> <<"object is remote">>; +message_1(eshutdown) -> <<"can't send after socket shutdown">>; +message_1(esocktnosupport) -> <<"socket type not supported">>; +message_1(espipe) -> <<"invalid seek">>; +message_1(esrch) -> <<"no such process">>; +message_1(esrmnt) -> <<"srmount error">>; +message_1(estale) -> <<"stale remote file handle">>; +message_1(esuccess) -> <<"Error 0">>; +message_1(etime) -> <<"timer expired">>; +message_1(etimedout) -> <<"connection timed out">>; +message_1(etoomanyrefs) -> <<"too many references: can't splice">>; +message_1(etxtbsy) -> <<"text file or pseudo-device busy">>; +message_1(euclean) -> <<"structure needs cleaning">>; +message_1(eunatch) -> <<"protocol driver not attached">>; +message_1(eusers) -> <<"too many users">>; +message_1(eversion) -> <<"version mismatch">>; +message_1(ewouldblock) -> <<"operation would block">>; +message_1(exdev) -> <<"cross-domain link">>; +message_1(exfull) -> <<"message tables full">>; +message_1(nxdomain) -> <<"non-existing domain">>; +message_1(_) -> <<"unknown POSIX error">>. |