diff options
Diffstat (limited to 'lib/test_server')
37 files changed, 2183 insertions, 3811 deletions
diff --git a/lib/test_server/doc/src/test_server.xml b/lib/test_server/doc/src/test_server.xml index 5bfa42c36f..841cbfbe91 100644 --- a/lib/test_server/doc/src/test_server.xml +++ b/lib/test_server/doc/src/test_server.xml @@ -5,7 +5,7 @@ <header> <copyright> <year>2007</year> - <year>2011</year> + <year>2012</year> <holder>Ericsson AB, All Rights Reserved</holder> </copyright> <legalnotice> @@ -529,6 +529,18 @@ Only valid for peer nodes. Note that slave nodes always analogy with <c>os:getenv/1</c>), which removes the environment variable. Only valid for peer nodes. Not available on VxWorks.</item> + <tag><c>{start_cover, false}</c></tag> + <item>By default the test server will start cover on all nodes + when the test is run with code coverage analysis. To make + sure cover is not started on a new node, set this option to + <c>false</c>. This can be necessary if the connection to + the node at some point will be broken but the node is + expected to stay alive. The reason is that a remote cover + node can not continue to run without its main node. Another + solution would be to explicitly stop cover on the node + before breaking the connection, but in some situations (if + old code resides in one or more processes) this is not + possible.</item> </taglist> </desc> </func> diff --git a/lib/test_server/doc/src/ts.xml b/lib/test_server/doc/src/ts.xml index f9b48d8372..4a2c536e96 100644 --- a/lib/test_server/doc/src/ts.xml +++ b/lib/test_server/doc/src/ts.xml @@ -85,8 +85,7 @@ <p><c>ts:install/1</c> or <c>ts:install/2</c> is used if the target platform is different from the controller host, i.e. if you run on "remote target" or if special options are required - for your system. VxWorks is currently supported - as remote target platform. + for your system. </p> <p>See the reference manual for detailed information about <c>ts:install/0/1/2</c>. @@ -249,9 +248,8 @@ <p>Installs and configures the Test Server Framework for running test suites. If a remote host is to be used, the <c>TargetSystem</c> argument must be given so that "cross - installation" can be done. This should be used for testing on - VxWorks. Installation is required for any of the - functions in <c>ts</c> to work. + installation" can be done. Installation is required for + any of the functions in <c>ts</c> to work. </p> <p>Opts may be one or more of </p> @@ -500,29 +498,6 @@ This option is mandatory for remote targets </desc> </func> <func> - <name>index() -> ok | {error, Reason}</name> - <fsummary>Updates local index page</fsummary> - <type> - <v>Reason = term()</v> - </type> - <desc> - <p>This function updates the local index page. This can be - useful if a previous test run was not completed and the index - is incomplete.</p> - </desc> - </func> - <func> - <name>clean() -> ok</name> - <name>clean(all) -> ok</name> - <fsummary>Cleans up the log directories created when running tests. </fsummary> - <desc> - <p>This function cleans up log directories created when - running test cases. <c>clean/0</c> cleans up all but the last - run of each application. <c>clean/1</c> cleans up all test - runs found.</p> - </desc> - </func> - <func> <name>estone() -> ok | {error, Reason}</name> <name>estone(Opts) -> ok</name> <fsummary>Runs the EStone test</fsummary> diff --git a/lib/test_server/src/Makefile b/lib/test_server/src/Makefile index 513720dc04..20e7a5942c 100644 --- a/lib/test_server/src/Makefile +++ b/lib/test_server/src/Makefile @@ -40,24 +40,24 @@ RELSYSDIR = $(RELEASE_PATH)/lib/test_server-$(VSN) # ---------------------------------------------------- MODULES= test_server_ctrl \ + test_server_gl \ + test_server_io \ test_server_node \ test_server \ test_server_sup \ test_server_h \ - erl2html2 \ - vxworks_client + erl2html2 TS_MODULES= \ ts \ ts_run \ - ts_reports \ ts_lib \ ts_make \ ts_erl_config \ ts_autoconf_win32 \ - ts_autoconf_vxworks \ ts_install \ - ts_install_cth + ts_install_cth \ + ts_benchmark TARGET_MODULES= $(MODULES:%=$(EBIN)/%) TS_TARGET_MODULES= $(TS_MODULES:%=$(EBIN)/%) diff --git a/lib/test_server/src/erl2html2.erl b/lib/test_server/src/erl2html2.erl index 6891e87e48..9c459c05d4 100644 --- a/lib/test_server/src/erl2html2.erl +++ b/lib/test_server/src/erl2html2.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 1997-2011. All Rights Reserved. +%% Copyright Ericsson AB 1997-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -18,19 +18,9 @@ %% %%%------------------------------------------------------------------ -%%% Purpose:Convert Erlang files to html. (Pretty faaast... :-) +%%% Purpose:Convert Erlang files to html. %%%------------------------------------------------------------------ -%-------------------------------------------------------------------- -% Some stats (Sparc5@110Mhz): -% 4109 lines (erl_parse.erl): 3.00 secs -% 1847 lines (application_controller.erl): 0.57 secs -% 3160 lines (test_server.erl): 1.00 secs -% 1199 lines (ts_estone.erl): 0.35 secs -% -% Avg: ~4.5e-4s/line, or ~0.45s/1000 lines, or ~2200 lines/sec. -%-------------------------------------------------------------------- - -module(erl2html2). -export([convert/2, convert/3]). @@ -52,134 +42,141 @@ convert(File, Dest) -> "<body bgcolor=\"white\" text=\"black\"" " link=\"blue\" vlink=\"purple\" alink=\"red\">\n"], convert(File, Dest, Header). - + + convert(File, Dest, Header) -> - case file:read_file(File) of - {ok, Bin} -> - Code=binary_to_list(Bin), - statistics(runtime), - {Html1, Lines} = root(Code, [], 1), - Html = [Header, - "<pre>\n", Html1, "</pre>\n", - footer(Lines),"</body>\n</html>\n"], - file:write_file(Dest, Html); - {error, Reason} -> - {error, Reason} + %% statistics(runtime), + case parse_file(File) of + {ok,Functions} -> + %% {_, Time1} = statistics(runtime), + %% io:format("Parsed file in ~.2f Seconds.~n",[Time1/1000]), + case file:open(File,[raw,{read_ahead,10000}]) of + {ok,SFd} -> + case file:open(Dest,[write,raw]) of + {ok,DFd} -> + file:write(DFd,[Header,"<pre>\n"]), + Lines = build_html(SFd,DFd,Functions), + file:write(DFd,["</pre>\n",footer(), + "</body>\n</html>\n"]), + %% {_, Time2} = statistics(runtime), + %% io:format("Converted ~p lines in ~.2f Seconds.~n", + %% [Lines, Time2/1000]), + file:close(SFd), + file:close(DFd), + ok; + Error -> + Error + end; + Error -> + Error + end; + Error -> + Error end. -root([], Res, Line) -> - {Res, Line}; -root([Char0|Code], Res, Line0) -> - Char = [Char0], - case Char of - "-" -> - {Match, Line1, NewCode0, AttName} = - read_to_char(Line0+1, Code, [], [$(, $.]), - {_, Line2, NewCode, Stuff} = read_to_char(Line1, NewCode0, [], $\n), - NewRes = [Res,linenum(Line0),"-<b>",AttName, - "</b>",Match, Stuff, "\n"], - root(NewCode, NewRes, Line2); - "%" -> - {_, Line, NewCode, Stuff} = read_to_char(Line0+1, Code, [], $\n), - NewRes = [Res,linenum(Line0),"<i>%",Stuff,"</i>\n"], - root(NewCode, NewRes, Line); - "\n" -> - root(Code, [Res,linenum(Line0), "\n"], Line0+1); - " " -> - {_, Line, NewCode, Stuff} = read_to_char(Line0+1, Code, [], $\n), - root(NewCode, [Res,linenum(Line0)," ",Stuff, "\n"], - Line); - "\t" -> - {_, Line, NewCode, Stuff} = read_to_char(Line0+1, Code, [], $\n), - root(NewCode, [Res,linenum(Line0),"\t",Stuff, "\n"], - Line); - [Chr|_] when Chr>96, Chr<123 -> - %% Assumed to be function/clause start. - %% FIXME: This will trivially generate non-unique anchors - %% (one for each clause) --- which is illegal HTML. - {_, Line1, NewCode0, FName0} = read_to_char(Line0+1, Code, [], $(), - {_, Line2, NewCode, Stuff} = - read_to_char(Line1,NewCode0, [], $\n), - FuncName = [[Chr],FName0], - NewRes=[Res,"<a name=",FuncName,">", - linenum(Line0),"<b>",FuncName,"</b></a>", - "(",Stuff, "\n"], - root(NewCode, NewRes, Line2); - Chr -> - {_, Line, NewCode, Stuff} = read_to_char(Line0+1, Code, [], $\n), - root(NewCode, [Res,linenum(Line0),Chr,Stuff, "\n"], - Line) +%%%----------------------------------------------------------------- +%%% Parse the input file to get the line numbers for all function +%%% definitions. This will be used when creating link targets for each +%%% function in build_html/5. +%%% +%%% All function clauses are also marked in order to allow +%%% possibly_enhance/2 to write these in bold. +parse_file(File) -> + case epp:open(File, [], []) of + {ok,Epp} -> + Forms = parse_file(Epp,File,false), + epp:close(Epp), + {ok,Forms}; + {error,E} -> + {error,E} end. -read_to_char(Line0, [], Res, _Chr) -> - {nomatch, Line0, [], Res}; -read_to_char(Line0, [Char|Code], Res, Chr) -> - case Char of - Chr -> {Char, Line0, Code, Res}; - _ when is_list(Chr) -> - case lists:member(Char,Chr) of - true -> - {Char, Line0, Code, Res}; - false -> - {Line,NewCode,NewRes} = maybe_convert(Line0,Code,Res,Char), - read_to_char(Line, NewCode, NewRes, Chr) + +parse_file(Epp,File,InCorrectFile) -> + case epp:parse_erl_form(Epp) of + {ok,Form} -> + case Form of + {attribute,_,file,{File,_}} -> + parse_file(Epp,File,true); + {attribute,_,file,{_OtherFile,_}} -> + parse_file(Epp,File,false); + {function,L,F,A,[_|C]} when InCorrectFile -> + Clauses = [{clause,CL} || {clause,CL,_,_,_} <- C], + [{atom_to_list(F),A,L} | Clauses] ++ + parse_file(Epp,File,true); + _ -> + parse_file(Epp,File,InCorrectFile) end; - _ -> - {Line,NewCode,NewRes} = maybe_convert(Line0,Code,Res,Char), - read_to_char(Line,NewCode, NewRes, Chr) + {error,_E} -> + parse_file(Epp,File,InCorrectFile); + {eof,_Location} -> + [] end. -maybe_convert(Line0,Code,Res,Chr) -> - case Chr of - %% Quoted stuff should not have the highlighting like normal code - %% FIXME: unbalanced quotes (e.g. in comments) will cause trouble with - %% highlighting and line numbering in the rest of the module. - $" -> - {_, Line1, NewCode, Stuff0} = read_to_char(Line0, Code, [], $"), - {Line2,Stuff} = add_linenumbers(Line1,lists:flatten(Stuff0),[]), - {Line2,NewCode,[Res,$",Stuff,$"]}; - %% These chars have meaning in HTML, and *must* *not* be - %% written as themselves. - $& -> - {Line0, Code, [Res,"&"]}; - $< -> - {Line0, Code, [Res,"<"]}; - $> -> - {Line0, Code, [Res,">"]}; - %% Everything else is simply copied. - OtherChr -> - {Line0, Code, [Res,OtherChr]} - end. +%%%----------------------------------------------------------------- +%%% Add a link target for each line and one for each function definition. +build_html(SFd,DFd,Functions) -> + build_html(SFd,DFd,file:read_line(SFd),1,Functions,false). -add_linenumbers(Line,[Chr|Chrs],Res) -> - case Chr of - $\n -> add_linenumbers(Line+1,Chrs,[Res,$\n,linenum(Line)]); - _ -> add_linenumbers(Line,Chrs,[Res,Chr]) - end; -add_linenumbers(Line,[],Res) -> - {Line,Res}. +build_html(SFd,DFd,{ok,Str},L,[{F,A,L}|Functions],_IsFuncDef) -> + FALink = http_uri:encode(F++"-"++integer_to_list(A)), + file:write(DFd,["<a name=\"",FALink,"\"/>"]), + build_html(SFd,DFd,{ok,Str},L,Functions,true); +build_html(SFd,DFd,{ok,Str},L,[{clause,L}|Functions],_IsFuncDef) -> + build_html(SFd,DFd,{ok,Str},L,Functions,true); +build_html(SFd,DFd,{ok,Str},L,Functions,IsFuncDef) -> + LStr = line_number(L), + Str1 = line(Str,IsFuncDef), + file:write(DFd,[LStr,Str1]), + build_html(SFd,DFd,file:read_line(SFd),L+1,Functions,false); +build_html(_SFd,_DFd,eof,L,_Functions,_IsFuncDef) -> + L. -%% Make nicely indented line numbers. -linenum(Line) -> - Num = integer_to_list(Line), - A = case Line rem 10 of - 0 -> "<a name=\"" ++ Num ++"\"></a>"; - _ -> [] - end, +line_number(L) -> + LStr = integer_to_list(L), Pred = - case length(Num) of + case length(LStr) of Length when Length < 5 -> lists:duplicate(5-Length,$\s); _ -> [] end, - [A,Pred,integer_to_list(Line),":"]. + ["<a name=\"",LStr,"\"/>",Pred,LStr,": "]. + +line(Str,IsFuncDef) -> + Str1 = htmlize(Str), + possibly_enhance(Str1,IsFuncDef). + +%%%----------------------------------------------------------------- +%%% Substitute special characters that should not appear in HTML +htmlize([$<|Str]) -> + [$&,$l,$t,$;|htmlize(Str)]; +htmlize([$>|Str]) -> + [$&,$g,$t,$;|htmlize(Str)]; +htmlize([$&|Str]) -> + [$&,$a,$m,$p,$;|htmlize(Str)]; +htmlize([$"|Str]) -> + [$&,$q,$u,$o,$t,$;|htmlize(Str)]; +htmlize([Ch|Str]) -> + [Ch|htmlize(Str)]; +htmlize([]) -> + []. + +%%%----------------------------------------------------------------- +%%% Write comments in italic and function definitions in bold. +possibly_enhance(Str,true) -> + case lists:splitwith(fun($() -> false; (_) -> true end, Str) of + {_,[]} -> Str; + {F,A} -> ["<b>",F,"</b>",A] + end; +possibly_enhance([$%|_]=Str,_) -> + ["<i>",Str--"\n","</i>","\n"]; +possibly_enhance([$-|_]=Str,_) -> + possibly_enhance(Str,true); +possibly_enhance(Str,false) -> + Str. -footer(_Lines) -> +%%%----------------------------------------------------------------- +%%% End of the file +footer() -> "". -%% {_, Time} = statistics(runtime), -%% io:format("Converted ~p lines in ~.2f Seconds.~n", -%% [Lines, Time/1000]), -%% S = "<i>The transformation of this file (~p lines) took ~.2f seconds</i>", -%% F = lists:flatten(io_lib:format(S, [Lines, Time/1000])), -%% ["<hr size=1>",F,"<br>\n"]. diff --git a/lib/test_server/src/test_server.app.src b/lib/test_server/src/test_server.app.src index faf7db835e..26330f9695 100644 --- a/lib/test_server/src/test_server.app.src +++ b/lib/test_server/src/test_server.app.src @@ -24,6 +24,7 @@ test_server_ctrl, test_server, test_server_h, + test_server_io, test_server_node, test_server_sup ]}, diff --git a/lib/test_server/src/test_server.erl b/lib/test_server/src/test_server.erl index 17c5f5b253..14cdfd391a 100644 --- a/lib/test_server/src/test_server.erl +++ b/lib/test_server/src/test_server.erl @@ -20,15 +20,12 @@ -define(DEFAULT_TIMETRAP_SECS, 60). -%%% START %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% --export([start/1,start/2]). - %%% TEST_SERVER_CTRL INTERFACE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -export([run_test_case_apply/1,init_target_info/0,init_purify/0]). --export([cover_compile/1,cover_analyse/2]). +-export([cover_compile/1,cover_analyse/3]). %%% TEST_SERVER_SUP INTERFACE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% --export([get_loc/1]). +-export([get_loc/1,set_tc_state/1]). %%% TEST SUITE INTERFACE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -export([lookup_config/2]). @@ -60,49 +57,11 @@ -export([]). %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% --record(state,{controller,jobs=[]}). - -include("test_server_internal.hrl"). -include_lib("kernel/include/file.hrl"). -define(pl2a(M), test_server_sup:package_atom(M)). -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% -%% **** START *** CODE FOR REMOTE TARGET ONLY *** -%% -%% test_server -%% This process is started only if the test is to be run on a remote target -%% The process is then started on target -%% A socket connection is established with the test_server_ctrl process -%% on host, and information about target is sent to host. -start([ControllerHost]) when is_atom(ControllerHost) -> - start(atom_to_list(ControllerHost)); -start(ControllerHost) when is_list(ControllerHost) -> - start(ControllerHost,?MAIN_PORT). -start(ControllerHost,ControllerPort) -> - S = self(), - Pid = spawn(fun() -> init(ControllerHost,ControllerPort,S) end), - receive {Pid,started} -> {ok,Pid}; - {Pid,Error} -> Error - end. - -init(Host,Port,Starter) -> - global:register_name(?MODULE,self()), - process_flag(trap_exit,true), - test_server_sup:cleanup_crash_dumps(), - case gen_tcp:connect(Host,Port, [binary, - {reuseaddr,true}, - {packet,2}]) of - {ok,MainSock} -> - Starter ! {self(),started}, - request(MainSock,{target_info,init_target_info()}), - loop(#state{controller={Host,MainSock}}); - Error -> - Starter ! {self(),{error, - {could_not_contact_controller,Error}}} - end. - init_target_info() -> [$.|Emu] = code:objfile_extension(), {_, OTPRel} = init:script_id(), @@ -118,171 +77,10 @@ init_target_info() -> username=test_server_sup:get_username(), cookie=atom_to_list(erlang:get_cookie())}. - -loop(#state{controller={_,MainSock}} = State) -> - receive - {tcp, MainSock, <<1,Request/binary>>} -> - State1 = decode_main(binary_to_term(Request),State), - loop(State1); - {tcp_closed, MainSock} -> - gen_tcp:close(MainSock), - halt(); - {'EXIT',Pid,Reason} -> - case lists:keysearch(Pid,1,State#state.jobs) of - {value,{Pid,Name}} -> - case Reason of - normal -> ignore; - _other -> request(MainSock,{job_proc_killed,Name,Reason}) - end, - NewJobs = lists:keydelete(Pid,1,State#state.jobs), - loop(State#state{jobs = NewJobs}); - false -> - loop(State) - end - end. - -%% Decode request on main socket -decode_main({job,Port,Name},#state{controller={Host,_},jobs=Jobs}=State) -> - S = self(), - NewJob = spawn_link(fun() -> job(Host,Port,S) end), - receive {NewJob,started} -> State#state{jobs=[{NewJob,Name}|Jobs]}; - {NewJob,_Error} -> State - end. - init_purify() -> purify_new_leaks(). -%% Temporary job process on target -%% This process will live while all test cases in the job are executed. -%% A socket connection is established with the job process on host. -job(Host,Port,Starter) -> - process_flag(trap_exit,true), - init_purify(), - case gen_tcp:connect(Host,Port, [binary, - {reuseaddr,true}, - {packet,4}, - {active,false}]) of - {ok,JobSock} -> - Starter ! {self(),started}, - job(JobSock); - Error -> - Starter ! {self(),{error, - {could_not_contact_controller,Error}}} - end. - -job(JobSock) -> - JobDir = get_jobdir(), - ok = file:make_dir(JobDir), - ok = file:make_dir(filename:join(JobDir,?priv_dir)), - put(test_server_job_sock,JobSock), - put(test_server_job_dir,JobDir), - {ok,Cwd} = file:get_cwd(), - job_loop(JobSock), - ok = file:set_cwd(Cwd), - send_privdir(JobDir,JobSock), % also recursively removes jobdir - ok. - - -get_jobdir() -> - Now = now(), - {{Y,M,D},{H,Mi,S}} = calendar:now_to_local_time(Now), - Basename = io_lib:format("~w-~2.2.0w-~2.2.0w_~2.2.0w.~2.2.0w.~2.2.0w_~w", - [Y,M,D,H,Mi,S,element(3,Now)]), - %% if target has a file master, don't use prim_file to look up cwd - case lists:keymember(master,1,init:get_arguments()) of - true -> - {ok,Cwd} = file:get_cwd(), - Cwd ++ "/" ++ Basename; - false -> - filename:absname(Basename) - end. - -send_privdir(JobDir,JobSock) -> - LocalPrivDir = filename:join(JobDir,?priv_dir), - case file:list_dir(LocalPrivDir) of - {ok,List} when List/=[] -> - Tarfile0 = ?priv_dir ++ ".tar.gz", - Tarfile = filename:join(JobDir,Tarfile0), - {ok,Tar} = erl_tar:open(Tarfile,[write,compressed,cooked]), - ok = erl_tar:add(Tar,LocalPrivDir,?priv_dir,[]), - ok = erl_tar:close(Tar), - {ok,TarBin} = file:read_file(Tarfile), - file:delete(Tarfile), - ok = del_dir(JobDir), - request(JobSock,{{privdir,Tarfile0},TarBin}); - _ -> - ok = del_dir(JobDir), - request(JobSock,{privdir,empty_priv_dir}) - end. - -del_dir(Dir) -> - case file:read_file_info(Dir) of - {ok,#file_info{type=directory}} -> - {ok,Cont} = file:list_dir(Dir), - lists:foreach(fun(F) -> del_dir(filename:join(Dir,F)) end, Cont), - ok = file:del_dir(Dir); - {ok,#file_info{}} -> - ok = file:delete(Dir); - _r -> - %% This might be a symlink - let's try to delete it! - catch file:delete(Dir), - ok - end. - -%% -%% Receive and decode request on job socket -%% -job_loop(JobSock) -> - Request = recv(JobSock), - case decode_job(Request) of - ok -> job_loop(JobSock); - {stop,R} -> R - end. - -decode_job({{beam,Mod,Which},Beam}) -> - % FIXME, shared directory structure on host and target required, - % "Library beams" are not loaded from HOST... /Patrik - code:add_patha(filename:dirname(Which)), - % End of Patriks uglyness... - {module,Mod} = code:load_binary(Mod,Which,Beam), - ok; -decode_job({{datadir,Tarfile0},Archive}) -> - JobDir = get(test_server_job_dir), - Tarfile = filename:join(JobDir,Tarfile0), - ok = file:write_file(Tarfile,Archive), - % Cooked is temporary removed/broken - % ok = erl_tar:extract(Tarfile,[compressed,{cwd,JobDir},cooked]), - ok = erl_tar:extract(Tarfile,[compressed,{cwd,JobDir}]), - ok = file:delete(Tarfile), - ok; -decode_job({test_case,Case}) -> - Result = run_test_case_apply(Case), - JobSock = get(test_server_job_sock), - request(JobSock,{test_case_result,Result}), - case test_server_sup:tar_crash_dumps() of - {error,no_crash_dumps} -> request(JobSock,{crash_dumps,no_crash_dumps}); - {ok,TarFile} -> - {ok,TarBin} = file:read_file(TarFile), - file:delete(TarFile), - request(JobSock,{{crash_dumps,filename:basename(TarFile)},TarBin}) - end, - ok; -decode_job({sync_apply,{M,F,A}}) -> - R = apply(M,F,A), - request(get(test_server_job_sock),{sync_result,R}), - ok; -decode_job(job_done) -> - {stop,stopped}. - -%% -%% **** STOP *** CODE FOR REMOTE TARGET ONLY *** -%% -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - - - - %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% cover_compile({App,Include,Exclude,Cross}) -> %% {ok,AnalyseModules} | {error,Reason} @@ -377,9 +175,7 @@ module_names(Beams) -> do_cover_compile(Modules) -> do_cover_compile1(lists:usort(Modules)). % remove duplicates -do_cover_compile1([Dont|Rest]) when Dont=:=cover; - Dont=:=test_server; - Dont=:=test_server_ctrl -> +do_cover_compile1([Dont|Rest]) when Dont=:=cover -> do_cover_compile1(Rest); do_cover_compile1([M|Rest]) -> case {code:is_sticky(M),code:is_loaded(M)} of @@ -416,7 +212,7 @@ do_cover_compile1([]) -> ok. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% cover_analyse(Analyse,Modules) -> [{M,{Cov,NotCov,Details}}] +%% cover_analyse(Analyse,Modules,Stop) -> [{M,{Cov,NotCov,Details}}] %% %% Analyse = {details,Dir} | details | {overview,void()} | overview %% Modules = [atom()], the modules to analyse @@ -432,8 +228,19 @@ do_cover_compile1([]) -> %% %% Also, if a Dir exists, cover data will be exported to a file called %% all.coverdata in that directory. -cover_analyse(Analyse,Modules) -> - io:fwrite("Cover analysing...\n",[]), +%% +%% Finally, if Stop==true, then cover will be stopped after the +%% analysis is completed. Stopping cover causes the original (non +%% cover compiled) modules to be loaded back in. If a process at this +%% point is still running old code of any of the cover compiled +%% modules, meaning that is has not done any fully qualified function +%% call after the cover compilation, the process will now be +%% killed. To avoid this scenario, it is possible to set Stop=false, +%% which means that the modules will stay cover compiled. Note that +%% this is only recommended if the erlang node is being terminated +%% after the test is completed. +cover_analyse(Analyse,Modules,Stop) -> + print(stdout, "Cover analysing...\n", []), DetailsFun = case Analyse of {details,Dir} -> @@ -483,9 +290,15 @@ cover_analyse(Analyse,Modules) -> {M,Err} end end, Modules), - Sticky = unstick_all_sticky(node()), - cover:stop(), - stick_all_sticky(node(),Sticky), + + case Stop of + true -> + Sticky = unstick_all_sticky(node()), + cover:stop(), + stick_all_sticky(node(),Sticky); + false -> + ok + end, R. pmap(Fun,List) -> @@ -502,7 +315,20 @@ pmap(Fun,List) -> end end, Pids). + +do_cover_for_node(Node,CoverFunc) -> + %% In case a slave node is starting another slave node! I.e. this + %% function is executed on a slave node - then the cover function + %% must be executed on the master node. This is for instance the + %% case in test_server's own tests. + MainCoverNode = cover:get_main_node(), + Sticky = unstick_all_sticky(MainCoverNode,Node), + rpc:call(MainCoverNode,cover,CoverFunc,[Node]), + stick_all_sticky(Node,Sticky). + unstick_all_sticky(Node) -> + unstick_all_sticky(node(),Node). +unstick_all_sticky(MainCoverNode,Node) -> lists:filter( fun(M) -> case code:is_sticky(M) of @@ -513,7 +339,7 @@ unstick_all_sticky(Node) -> false end end, - cover:modules()). + rpc:call(MainCoverNode,cover,modules,[])). stick_all_sticky(Node,Sticky) -> lists:foreach( @@ -524,7 +350,7 @@ stick_all_sticky(Node,Sticky) -> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% run_test_case_apply(Mod,Func,Args,Name,RunInit,TimetrapData,RejectIoReqs) -> +%% run_test_case_apply(Mod,Func,Args,Name,RunInit,TimetrapData) -> %% {Time,Value,Loc,Opts,Comment} | {died,Reason,unknown,Comment} %% %% Time = float() (seconds) @@ -538,7 +364,6 @@ stick_all_sticky(Node,Sticky) -> %% it possible to capture all it's output from io:format/2, etc. %% %% The job process then sits down and waits for news from the case process. -%% This might be io requests (which are redirected to the log files). %% %% Returns a tuple with the time spent (in seconds) in the test case, %% the return value from the test case or an {'EXIT',Reason} if the case @@ -559,12 +384,9 @@ stick_all_sticky(Node,Sticky) -> %% ScaleTimetrap indicates if test_server should attemp to automatically %% compensate timetraps for runtime delays introduced by e.g. tools like %% cover. -%% -%% RejectIoReqs (bool) is information about whether printouts to stdout -%% should be visible in the minor log file or not. run_test_case_apply({CaseNum,Mod,Func,Args,Name, - RunInit,TimetrapData,RejectIoReqs}) -> + RunInit,TimetrapData}) -> purify_format("Test case #~w ~w:~w/1", [CaseNum, Mod, Func]), case os:getenv("TS_RUN_VALGRIND") of false -> @@ -576,40 +398,29 @@ run_test_case_apply({CaseNum,Mod,Func,Args,Name, test_server_h:testcase({Mod,Func,1}), ProcBef = erlang:system_info(process_count), Result = run_test_case_apply(Mod, Func, Args, Name, RunInit, - TimetrapData, RejectIoReqs), + TimetrapData), ProcAft = erlang:system_info(process_count), purify_new_leaks(), DetFail = get(test_server_detected_fail), {Result,DetFail,ProcBef,ProcAft}. -run_test_case_apply(Mod, Func, Args, Name, RunInit, TimetrapData, RejectIoReqs) -> - case get(test_server_job_dir) of - undefined -> - %% i'm a local target - do_run_test_case_apply(Mod, Func, Args, Name, RunInit, - TimetrapData, RejectIoReqs); - JobDir -> - %% i'm a remote target - case Args of - [Config] when is_list(Config) -> - {value,{data_dir,HostDataDir}} = - lists:keysearch(data_dir, 1, Config), - DataBase = filename:basename(HostDataDir), - TargetDataDir = filename:join(JobDir, DataBase), - Config1 = lists:keyreplace(data_dir, 1, Config, - {data_dir,TargetDataDir}), - TargetPrivDir = filename:join(JobDir, ?priv_dir), - Config2 = lists:keyreplace(priv_dir, 1, Config1, - {priv_dir,TargetPrivDir}), - do_run_test_case_apply(Mod, Func, [Config2], Name, RunInit, - TimetrapData, RejectIoReqs); - _other -> - do_run_test_case_apply(Mod, Func, Args, Name, RunInit, - TimetrapData, RejectIoReqs) - end - end. -do_run_test_case_apply(Mod, Func, Args, Name, RunInit, - TimetrapData, RejectIoReqs) -> +-type tc_status() :: 'starting' | 'running' | 'init_per_testcase' | + 'end_per_testcase' | {'framework',atom(),atom()} | + 'tc'. +-record(st, + { + ref :: reference(), + pid :: pid(), + mf :: {atom(),atom()}, + status :: tc_status() | 'undefined', + ret_val :: term(), + comment :: list(char()), + timeout :: non_neg_integer() | 'infinity', + config :: list() | 'undefined', + end_conf_pid :: pid() | 'undefined' + }). + +run_test_case_apply(Mod, Func, Args, Name, RunInit, TimetrapData) -> {ok,Cwd} = file:get_cwd(), Args2Print = case Args of [Args1] when is_list(Args1) -> @@ -624,9 +435,6 @@ do_run_test_case_apply(Mod, Func, Args, Name, RunInit, TCCallback = get(test_server_testcase_callback), LogOpts = get(test_server_logopts), Ref = make_ref(), - OldGLeader = group_leader(), - %% Set ourself to group leader for the spawned process - group_leader(self(),self()), Pid = spawn_link( fun() -> @@ -634,10 +442,10 @@ do_run_test_case_apply(Mod, Func, Args, Name, RunInit, RunInit, TimetrapData, LogOpts, TCCallback) end), - group_leader(OldGLeader, self()), put(test_server_detected_fail, []), - run_test_case_msgloop(Ref, Pid, false, RejectIoReqs, false, "", - undefined, starting). + St = #st{ref=Ref,pid=Pid,mf={Mod,Func},status=starting,ret_val=[], + comment="",timeout=infinity,config=hd(Args)}, + run_test_case_msgloop(St). %% Ugly bug (pre R5A): %% If this process (group leader of the test case) terminates before @@ -648,32 +456,23 @@ do_run_test_case_apply(Mod, Func, Args, Name, RunInit, %% A test case is known to have failed if it returns {'EXIT', _} tuple, %% or sends a message {failed, File, Line} to it's group_leader %% -run_test_case_msgloop(Ref, Pid, CaptureStdout, RejectIoReqs, Terminate, - Comment, CurrConf, Status) -> - %% NOTE: Keep job_proxy_msgloop/0 up to date when changes - %% are made in this function! - {Timeout,ReturnValue} = - case Terminate of - {true, ReturnVal} -> - %% stop any timetrap timers for the test case - %% that have been started by this process - timetrap_cancel_all(Pid, false), - {20, ReturnVal}; - false -> - {infinity, should_never_appear} - end, +run_test_case_msgloop(#st{ref=Ref,pid=Pid,end_conf_pid=EndConfPid0}=St0) -> receive - {test_case_initialized,Pid} -> - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs,Terminate, - Comment,CurrConf,running); - Abort = {abort_current_testcase,_,_} when Status == starting -> + {set_tc_state=Tag,From,{Status,Config0}} -> + Config = case Config0 of + unknown -> St0#st.config; + _ -> Config0 + end, + St = St0#st{status=Status,config=Config}, + From ! {self(),Tag,ok}, + run_test_case_msgloop(St); + {abort_current_testcase,_,_}=Abort when St0#st.status =:= starting -> %% we're in init phase, must must postpone this operation %% until test case execution is in progress (or FW:init_tc %% gets killed) self() ! Abort, erlang:yield(), - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs,Terminate, - Comment,CurrConf,Status); + run_test_case_msgloop(St0); {abort_current_testcase,Reason,From} -> Line = case is_process_alive(Pid) of true -> get_loc(Pid); @@ -683,142 +482,49 @@ run_test_case_msgloop(Ref, Pid, CaptureStdout, RejectIoReqs, Terminate, exit(Pid,{testcase_aborted,Reason,Line}), erlang:yield(), From ! {self(),abort_current_testcase,ok}, - NewComment = - receive - {'DOWN', Mon, process, Pid, _} -> - Comment - after 10000 -> - %% Pid is probably trapping exits, hit it harder... - exit(Pid, kill), - %% here's the only place we know Reason, so we save - %% it as a comment, potentially replacing user data - Error = lists:flatten(io_lib:format("Aborted: ~p", - [Reason])), - Error1 = lists:flatten([string:strip(S,left) || + St = receive + {'DOWN', Mon, process, Pid, _} -> + St0 + after 10000 -> + %% Pid is probably trapping exits, hit it harder... + exit(Pid, kill), + %% here's the only place we know Reason, so we save + %% it as a comment, potentially replacing user data + Error = lists:flatten(io_lib:format("Aborted: ~p", + [Reason])), + Error1 = lists:flatten([string:strip(S,left) || S <- string:tokens(Error, [$\n])]), - if length(Error1) > 63 -> - string:substr(Error1,1,60) ++ "..."; - true -> - Error1 - end - end, - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs,Terminate, - NewComment,CurrConf,Status); - {permit_io,FromPid} -> - put({permit_io,FromPid},true), - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs,Terminate, - Comment,CurrConf,Status); - {io_request,From,ReplyAs,{put_chars,io_lib,Func,[Format,Args]}} - when is_list(Format) -> - Msg = (catch io_lib:Func(Format,Args)), - run_test_case_msgloop_io(From,ReplyAs,CaptureStdout,RejectIoReqs, - Msg,From,Func), - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs,Terminate, - Comment,CurrConf,Status); - {io_request,From,ReplyAs,{put_chars,io_lib,Func,[Format,Args]}} - when is_atom(Format) -> - Msg = (catch io_lib:Func(Format,Args)), - run_test_case_msgloop_io(From,ReplyAs,CaptureStdout,RejectIoReqs, - Msg,From,Func), - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs,Terminate, - Comment,CurrConf,Status); - {io_request,From,ReplyAs,{put_chars,Bytes}} -> - run_test_case_msgloop_io(From,ReplyAs,CaptureStdout,RejectIoReqs, - Bytes,From,put_chars), - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs,Terminate, - Comment,CurrConf,Status); - {io_request,From,ReplyAs,{put_chars,unicode,io_lib,Func,[Format,Args]}} - when is_list(Format) -> - Msg = unicode_to_latin1(catch io_lib:Func(Format,Args)), - run_test_case_msgloop_io(From,ReplyAs,CaptureStdout,RejectIoReqs, - Msg,From,Func), - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs,Terminate, - Comment,CurrConf,Status); - {io_request,From,ReplyAs,{put_chars,latin1,io_lib,Func,[Format,Args]}} - when is_list(Format) -> - Msg = (catch io_lib:Func(Format,Args)), - run_test_case_msgloop_io(From,ReplyAs,CaptureStdout,RejectIoReqs, - Msg,From,Func), - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs,Terminate, - Comment,CurrConf,Status); - {io_request,From,ReplyAs,{put_chars,unicode,io_lib,Func,[Format,Args]}} - when is_atom(Format) -> - Msg = unicode_to_latin1(catch io_lib:Func(Format,Args)), - run_test_case_msgloop_io(From,ReplyAs,CaptureStdout,RejectIoReqs, - Msg,From,Func), - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs,Terminate, - Comment,CurrConf,Status); - {io_request,From,ReplyAs,{put_chars,latin1,io_lib,Func,[Format,Args]}} - when is_atom(Format) -> - Msg = (catch io_lib:Func(Format,Args)), - run_test_case_msgloop_io(From,ReplyAs,CaptureStdout,RejectIoReqs, - Msg,From,Func), - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs,Terminate, - Comment,CurrConf,Status); - {io_request,From,ReplyAs,{put_chars,unicode,Bytes}} -> - run_test_case_msgloop_io(From,ReplyAs,CaptureStdout,RejectIoReqs, - unicode_to_latin1(Bytes),From,put_chars), - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs,Terminate, - Comment,CurrConf,Status); - {io_request,From,ReplyAs,{put_chars,latin1,Bytes}} -> - run_test_case_msgloop_io(From,ReplyAs,CaptureStdout,RejectIoReqs, - Bytes,From,put_chars), - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs,Terminate, - Comment,CurrConf,Status); - IoReq when element(1, IoReq) == io_request -> - %% something else, just pass it on - group_leader() ! IoReq, - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs,Terminate, - Comment,CurrConf,Status); - {structured_io,ClientPid,Msg} -> - output(Msg, ClientPid), - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs,Terminate, - Comment,CurrConf,Status); - {capture,NewCapture} -> - run_test_case_msgloop(Ref,Pid,NewCapture,RejectIoReqs,Terminate, - Comment,CurrConf,Status); + Comment = if length(Error1) > 63 -> + string:substr(Error1,1,60) ++ "..."; + true -> + Error1 + end, + St0#st{comment=Comment} + end, + run_test_case_msgloop(St); {sync_apply,From,MFA} -> sync_local_or_remote_apply(false,From,MFA), - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs,Terminate, - Comment,CurrConf,Status); + run_test_case_msgloop(St0); {sync_apply_proxy,Proxy,From,MFA} -> sync_local_or_remote_apply(Proxy,From,MFA), - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs,Terminate, - Comment,CurrConf,Status); - {printout,Detail,Format,Args} -> - print(Detail,Format,Args), - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs,Terminate, - Comment,CurrConf,Status); - {comment,NewComment} -> - NewComment1 = test_server_ctrl:to_string(NewComment), - NewComment2 = test_server_sup:framework_call(format_comment, - [NewComment1], - NewComment1), - Terminate1 = - case Terminate of - {true,{Time,Value,Loc,Opts,_OldComment}} -> - {true,{Time,Value,mod_loc(Loc),Opts,NewComment2}}; - Other -> - Other - end, - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs,Terminate1, - NewComment2,CurrConf,Status); + run_test_case_msgloop(St0); + {comment,NewComment0} -> + NewComment1 = test_server_ctrl:to_string(NewComment0), + NewComment = test_server_sup:framework_call(format_comment, + [NewComment1], + NewComment1), + run_test_case_msgloop(St0#st{comment=NewComment}); {read_comment,From} -> - From ! {self(),read_comment,Comment}, - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs,Terminate, - Comment,CurrConf,Status); - {set_curr_conf,From,NewCurrConf} -> - From ! {self(),set_curr_conf,ok}, - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs,Terminate, - Comment,NewCurrConf,Status); - {make_priv_dir,From} when CurrConf == undefined -> - From ! {self(),make_priv_dir,{error,no_priv_dir_in_config}}, - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs,Terminate, - Comment,CurrConf,Status); + From ! {self(),read_comment,St0#st.comment}, + run_test_case_msgloop(St0); {make_priv_dir,From} -> + Config = case St0#st.config of + undefined -> []; + Config0 -> Config0 + end, Result = - case proplists:get_value(priv_dir, element(2, CurrConf)) of + case proplists:get_value(priv_dir, Config) of undefined -> {error,no_priv_dir_in_config}; PrivDir -> @@ -832,212 +538,63 @@ run_test_case_msgloop(Ref, Pid, CaptureStdout, RejectIoReqs, Terminate, end end, From ! {self(),make_priv_dir,Result}, - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs,Terminate, - Comment,CurrConf,Status); + run_test_case_msgloop(St0); {'EXIT',Pid,{Ref,Time,Value,Loc,Opts}} -> - RetVal = {Time/1000000,Value,mod_loc(Loc),Opts,Comment}, - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs, - {true,RetVal},Comment,undefined,Status); + RetVal = {Time/1000000,Value,Loc,Opts}, + St = setup_termination(RetVal, St0#st{config=undefined}), + run_test_case_msgloop(St); {'EXIT',Pid,Reason} -> - case Reason of - {timetrap_timeout,TVal,Loc} -> - %% convert Loc to form that can be formatted - case mod_loc(Loc) of - {FwMod,FwFunc,framework} -> - %% timout during framework call - spawn_fw_call(FwMod,FwFunc,CurrConf,Pid, - {framework_error,{timetrap,TVal}}, - unknown,self()), - run_test_case_msgloop(Ref,Pid, - CaptureStdout,RejectIoReqs, - Terminate,Comment, - undefined,Status); - Loc1 -> - %% call end_per_testcase on a separate process, - %% only so that the user has a chance to - %% clean up after init_per_testcase, even after - %% a timetrap timeout - NewCurrConf = - case CurrConf of - {{Mod,Func},Conf} -> - EndConfPid = - call_end_conf( - Mod,Func,Pid, - {timetrap_timeout,TVal}, - Loc1,[{tc_status, - {failed, - timetrap_timeout}}|Conf], - TVal), - {EndConfPid,{Mod,Func},Conf}; - _ -> - {Mod,Func} = get_mf(Loc1), - %% The framework functions mustn't - %% execute on this group leader process - %% or io will cause deadlock, so we - %% spawn a dedicated process for the - %% operation and let the group leader - %% go back to handle io. - spawn_fw_call(Mod,Func,CurrConf,Pid, - {timetrap_timeout,TVal}, - Loc1,self()), - undefined - end, - run_test_case_msgloop(Ref,Pid, - CaptureStdout,RejectIoReqs, - Terminate,Comment, - NewCurrConf,Status) - end; - {timetrap_timeout,TVal,Loc,InitOrEnd} -> - case mod_loc(Loc) of - {FwMod,FwFunc,framework} -> - %% timout during framework call - spawn_fw_call(FwMod,FwFunc,CurrConf,Pid, - {framework_error,{timetrap,TVal}}, - unknown,self()); - Loc1 -> - {Mod,_Func} = get_mf(Loc1), - spawn_fw_call(Mod,InitOrEnd,CurrConf,Pid, - {timetrap_timeout,TVal}, - Loc1,self()) - end, - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs, - Terminate,Comment,CurrConf,Status); - {testcase_aborted,ErrorMsg={user_timetrap_error,_},AbortLoc} -> - %% user timetrap function caused exit - %% during start of test case - {Mod,Func} = get_mf(mod_loc(AbortLoc)), - spawn_fw_call(Mod,Func,CurrConf,Pid, - ErrorMsg,unknown,self()), - run_test_case_msgloop(Ref,Pid, - CaptureStdout,RejectIoReqs, - Terminate,Comment, - undefined,Status); - {testcase_aborted,AbortReason,AbortLoc} -> - ErrorMsg = {testcase_aborted,AbortReason}, - case mod_loc(AbortLoc) of - {FwMod,FwFunc,framework} -> - %% abort during framework call - spawn_fw_call(FwMod,FwFunc,CurrConf,Pid, - {framework_error,ErrorMsg}, - unknown,self()), - run_test_case_msgloop(Ref,Pid, - CaptureStdout,RejectIoReqs, - Terminate,Comment, - undefined,Status); - Loc1 -> - %% call end_per_testcase on a separate process, - %% only so that the user has a chance to clean up - %% after init_per_testcase, even after abortion - NewCurrConf = - case CurrConf of - {{Mod,Func},Conf} -> - TVal = - case lists:keysearch(default_timeout, - 1, - Conf) of - {value,{default_timeout,Tmo}} -> - Tmo; - _ -> - ?DEFAULT_TIMETRAP_SECS*1000 - end, - EndConfPid = - call_end_conf( - Mod,Func,Pid, - ErrorMsg,Loc1, - [{tc_status, - {failed,ErrorMsg}}|Conf],TVal), - {EndConfPid,{Mod,Func},Conf}; - _ -> - {Mod,Func} = get_mf(Loc1), - spawn_fw_call(Mod,Func,CurrConf,Pid, - ErrorMsg,Loc1,self()), - undefined - end, - run_test_case_msgloop(Ref,Pid, - CaptureStdout,RejectIoReqs, - Terminate,Comment, - NewCurrConf,Status) - end; - killed -> - %% result of an exit(TestCase,kill) call, which is the - %% only way to abort a testcase process that traps exits - %% (see abort_current_testcase) - {Mod,Func} = case CurrConf of - {MF,_} -> MF; - _ -> {undefined,undefined} - end, - spawn_fw_call(Mod,Func,CurrConf,Pid, - testcase_aborted_or_killed, - unknown,self()), - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs, - Terminate,Comment,CurrConf,Status); - {fw_error,{FwMod,FwFunc,FwError}} -> - spawn_fw_call(FwMod,FwFunc,CurrConf,Pid, - {framework_error,FwError}, - unknown,self()), - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs, - Terminate,Comment,CurrConf,Status); - _Other -> - %% the testcase has terminated because of Reason (e.g. an exit - %% because a linked process failed) - {Mod,Func} = case CurrConf of - {MF,_} -> MF; - _ -> {undefined,undefined} - end, - spawn_fw_call(Mod,Func,CurrConf,Pid, - Reason,unknown,self()), - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs, - Terminate,Comment,CurrConf,Status) - end; - {EndConfPid,{call_end_conf,Data,_Result}} -> + St = handle_tc_exit(Reason, St0), + run_test_case_msgloop(St); + {EndConfPid0,{call_end_conf,Data,_Result}} -> + #st{mf={Mod,Func},config=CurrConf} = St0, case CurrConf of - {EndConfPid,{Mod,Func},_Conf} -> + _ when is_list(CurrConf) -> {_Mod,_Func,TCPid,TCExitReason,Loc} = Data, spawn_fw_call(Mod,Func,CurrConf,TCPid, TCExitReason,Loc,self()), - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs, - Terminate,Comment,undefined,Status); + St = St0#st{config=undefined,end_conf_pid=undefined}, + run_test_case_msgloop(St); _ -> - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs, - Terminate,Comment,CurrConf,Status) + run_test_case_msgloop(St0) end; {_FwCallPid,fw_notify_done,{T,Value,Loc,Opts,AddToComment}} -> %% the framework has been notified, we're finished - RetVal = - case AddToComment of - undefined -> - {T,Value,Loc,Opts,Comment}; - _ -> - Comment1 = - if Comment == "" -> - AddToComment; - true -> - Comment ++ - test_server_ctrl:xhtml("<br>", - "<br />") ++ - AddToComment - end, - {T,Value,Loc,Opts,Comment1} - end, - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs, - {true,RetVal},Comment,undefined,Status); + RetVal = {T,Value,Loc,Opts}, + Comment0 = St0#st.comment, + Comment = case AddToComment of + undefined -> + Comment0; + _ -> + if Comment0 =:= "" -> + AddToComment; + true -> + Comment0 ++ + test_server_ctrl:xhtml("<br>", + "<br />") ++ + AddToComment + end + end, + St = setup_termination(RetVal, St0#st{comment=Comment, + config=undefined}), + run_test_case_msgloop(St); {'EXIT',_FwCallPid,{fw_notify_done,Func,Error}} -> %% a framework function failed CB = os:getenv("TEST_SERVER_FRAMEWORK"), Loc = case CB of FW when FW =:= false; FW =:= "undefined" -> - {test_server,Func}; + [{test_server,Func}]; _ -> - {list_to_atom(CB),Func} + [{list_to_atom(CB),Func}] end, - RetVal = {died,{framework_error,Loc,Error},Loc,"Framework error"}, - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs, - {true,RetVal},Comment,undefined,Status); + RetVal = {died,{framework_error,Loc,Error},Loc}, + St = setup_termination(RetVal, St0#st{comment="Framework error", + config=undefined}), + run_test_case_msgloop(St); {failed,File,Line} -> put(test_server_detected_fail, [{File, Line}| get(test_server_detected_fail)]), - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs, - Terminate,Comment,CurrConf,Status); + run_test_case_msgloop(St0); {user_timetrap,Pid,_TrapTime,StartTime,E={user_timetrap_error,_},_} -> case update_user_timetraps(Pid, StartTime) of @@ -1046,8 +603,7 @@ run_test_case_msgloop(Ref, Pid, CaptureStdout, RejectIoReqs, Terminate, ignore -> ok end, - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs, - Terminate,Comment,CurrConf,Status); + run_test_case_msgloop(St0); {user_timetrap,Pid,TrapTime,StartTime,ElapsedTime,Scale} -> %% a user timetrap is triggered, ignore it if new %% timetrap has been started since @@ -1062,71 +618,117 @@ run_test_case_msgloop(Ref, Pid, CaptureStdout, RejectIoReqs, Terminate, ignore -> ok end, - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs, - Terminate,Comment,CurrConf,Status); + run_test_case_msgloop(St0); {timetrap_cancel_one,Handle,_From} -> timetrap_cancel_one(Handle, false), - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs, - Terminate,Comment,CurrConf,Status); + run_test_case_msgloop(St0); {timetrap_cancel_all,TCPid,_From} -> timetrap_cancel_all(TCPid, false), - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs, - Terminate,Comment,CurrConf,Status); - {get_timetrap_info,TCPid,From} -> + run_test_case_msgloop(St0); + {get_timetrap_info,From,TCPid} -> Info = get_timetrap_info(TCPid, false), From ! {self(),get_timetrap_info,Info}, - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs, - Terminate,Comment,CurrConf,Status); + run_test_case_msgloop(St0); _Other when not is_tuple(_Other) -> %% ignore anything not generated by test server - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs, - Terminate,Comment,CurrConf,Status); + run_test_case_msgloop(St0); _Other when element(1, _Other) /= 'EXIT', element(1, _Other) /= started, element(1, _Other) /= finished, element(1, _Other) /= print -> %% ignore anything not generated by test server - run_test_case_msgloop(Ref,Pid,CaptureStdout,RejectIoReqs, - Terminate,Comment,CurrConf,Status) - after Timeout -> - ReturnValue + run_test_case_msgloop(St0) + after St0#st.timeout -> + #st{ret_val=RetVal,comment=Comment} = St0, + erlang:append_element(RetVal, Comment) end. -run_test_case_msgloop_io(From,ReplyAs,CaptureStdout,RejectIoReqs, - Msg,From,Func) -> - case Msg of - {'EXIT',_} -> - From ! {io_reply,ReplyAs,{error,Func}}; - _ -> - From ! {io_reply,ReplyAs,ok} - end, - Proceed = if RejectIoReqs -> get({permit_io,From}); - true -> true - end, - if Proceed -> - if CaptureStdout /= false -> - CaptureStdout ! {captured,Msg}; - true -> - ok - end, - output({minor,Msg},From); - true -> - ok - end. +setup_termination(RetVal, #st{pid=Pid}=St) -> + timetrap_cancel_all(Pid, false), + St#st{ret_val=RetVal,timeout=20}. + +set_tc_state(State) -> + set_tc_state(State,unknown). +set_tc_state(State, Config) -> + tc_supervisor_req(set_tc_state, {State,Config}). + +handle_tc_exit(killed, St) -> + %% probably the result of an exit(TestCase,kill) call, which is the + %% only way to abort a testcase process that traps exits + %% (see abort_current_testcase). + #st{config=Config,mf={Mod,Func},pid=Pid} = St, + Msg = testcase_aborted_or_killed, + spawn_fw_call(Mod, Func, Config, Pid, Msg, unknown, self()), + St; +handle_tc_exit({testcase_aborted,{user_timetrap_error,_}=Msg,_}, St) -> + #st{config=Config,mf={Mod,Func},pid=Pid} = St, + spawn_fw_call(Mod, Func, Config, Pid, Msg, unknown, self()), + St; +handle_tc_exit(Reason, #st{status={framework,FwMod,FwFunc}, + config=Config,pid=Pid}=St) -> + R = case Reason of + {timetrap_timeout,TVal,_} -> + {timetrap,TVal}; + {testcase_aborted=E,AbortReason,_} -> + {E,AbortReason}; + {fw_error,{FwMod,FwFunc,FwError}} -> + FwError; + Other -> + Other + end, + Error = {framework_error,R}, + spawn_fw_call(FwMod, FwFunc, Config, Pid, Error, unknown, self()), + St; +handle_tc_exit(Reason, #st{status=tc,config=Config0,mf={Mod,Func},pid=Pid}=St) + when is_list(Config0) -> + {R,Loc1,F} = case Reason of + {timetrap_timeout=E,TVal,Loc0} -> + {{E,TVal},Loc0,E}; + {testcase_aborted=E,AbortReason,Loc0} -> + Msg = {E,AbortReason}, + {Msg,Loc0,Msg}; + Other -> + {Other,unknown,Other} + end, + Timeout = end_conf_timeout(Reason, St), + Config = [{tc_status,{failed,F}}|Config0], + EndConfPid = call_end_conf(Mod, Func, Pid, R, Loc1, Config, Timeout), + St#st{end_conf_pid=EndConfPid}; +handle_tc_exit(Reason, #st{config=Config,mf={Mod,Func0},pid=Pid, + status=Status}=St) -> + {R,Loc1} = case Reason of + {timetrap_timeout=E,TVal,Loc0} -> + {{E,TVal},Loc0}; + {testcase_aborted=E,AbortReason,Loc0} -> + {{E,AbortReason},Loc0}; + Other -> + {Other,unknown} + end, + Func = case Status of + init_per_testcase=F -> {F,Func0}; + end_per_testcase=F -> {F,Func0}; + _ -> Func0 + end, + spawn_fw_call(Mod, Func, Config, Pid, R, Loc1, self()), + St. -output(Msg,Sender) -> - local_or_remote_apply({test_server_ctrl,output,[Msg,Sender]}). +end_conf_timeout({timetrap_timeout,Timeout,_}, _) -> + Timeout; +end_conf_timeout(_, #st{config=Config}) when is_list(Config) -> + proplists:get_value(default_timeout, Config, ?DEFAULT_TIMETRAP_SECS*1000); +end_conf_timeout(_, _) -> + ?DEFAULT_TIMETRAP_SECS*1000. call_end_conf(Mod,Func,TCPid,TCExitReason,Loc,Conf,TVal) -> - %% Starter is also the group leader process Starter = self(), Data = {Mod,Func,TCPid,TCExitReason,Loc}, EndConfProc = fun() -> - group_leader(Starter, self()), + process_flag(trap_exit,true), % to catch timetraps Supervisor = self(), EndConfApply = fun() -> + timetrap(TVal), case catch apply(Mod,end_per_testcase,[Func,Conf]) of {'EXIT',Why} -> timer:sleep(1), @@ -1145,29 +747,26 @@ call_end_conf(Mod,Func,TCPid,TCExitReason,Loc,Conf,TVal) -> {Pid,end_conf} -> Starter ! {self(),{call_end_conf,Data,ok}}; {'EXIT',Pid,Reason} -> - Starter ! {self(),{call_end_conf,Data,{error,Reason}}} - after TVal -> - exit(Pid, kill), group_leader() ! {printout,12, "WARNING! ~p:end_per_testcase(~p, ~p)" - " failed!\n\tReason: timetrap timeout" - " after ~w ms!\n", [Mod,Func,Conf,TVal]}, - Starter ! {self(),{call_end_conf,Data,{error,timeout}}} + " failed!\n\tReason: ~p\n", + [Mod,Func,Conf,Reason]}, + Starter ! {self(),{call_end_conf,Data,{error,Reason}}}; + {'EXIT',_OtherPid,Reason} -> + %% Probably the parent - not much to do about that + exit(Reason) end end, spawn_link(EndConfProc). -spawn_fw_call(Mod,{init_per_testcase,Func},_,Pid,{timetrap_timeout,TVal}=Why, +spawn_fw_call(Mod,{init_per_testcase,Func},CurrConf,Pid,{timetrap_timeout,TVal}=Why, Loc,SendTo) -> FwCall = fun() -> - %% set group leader so that printouts/comments - %% from the framework get printed in the logs - group_leader(SendTo, self()), Skip = {skip,{failed,{Mod,init_per_testcase,Why}}}, %% if init_per_testcase fails, the test case %% should be skipped - case catch do_end_tc_call(Mod,Func, Loc, {Pid,Skip,[[]]}, Why) of + case catch do_end_tc_call(Mod,Func, {Pid,Skip,[CurrConf]}, Why) of {'EXIT',FwEndTCErr} -> exit({fw_notify_done,end_tc,FwEndTCErr}); _ -> @@ -1181,22 +780,10 @@ spawn_fw_call(Mod,{init_per_testcase,Func},_,Pid,{timetrap_timeout,TVal}=Why, spawn_fw_call(Mod,{end_per_testcase,Func},EndConf,Pid, {timetrap_timeout,TVal}=Why,_Loc,SendTo) -> - %%! This is a temporary fix that keeps Test Server alive during - %%! execution of a parallel test case group, when sometimes - %%! this clause gets called with EndConf == undefined. See OTP-9594 - %%! for more info. - EndConf1 = if EndConf == undefined -> - [{tc_status,{failed,{Mod,end_per_testcase,Why}}}]; - true -> - EndConf - end, FwCall = fun() -> - %% set group leader so that printouts/comments - %% from the framework get printed in the logs - group_leader(SendTo, self()), {RetVal,Report} = - case proplists:get_value(tc_status, EndConf1) of + case proplists:get_value(tc_status, EndConf) of undefined -> E = {failed,{Mod,end_per_testcase,Why}}, {E,E}; @@ -1210,9 +797,9 @@ spawn_fw_call(Mod,{end_per_testcase,Func},EndConf,Pid, "WARNING! ~p:end_per_testcase(~p, ~p)" " failed!\n\tReason: timetrap timeout" " after ~w ms!\n", [Mod,Func,EndConf,TVal]}, - FailLoc = proplists:get_value(tc_fail_loc, EndConf1), - case catch do_end_tc_call(Mod,Func, FailLoc, - {Pid,Report,[EndConf1]}, Why) of + FailLoc = proplists:get_value(tc_fail_loc, EndConf), + case catch do_end_tc_call(Mod,Func, + {Pid,Report,[EndConf]}, Why) of {'EXIT',FwEndTCErr} -> exit({fw_notify_done,end_tc,FwEndTCErr}); _ -> @@ -1230,9 +817,6 @@ spawn_fw_call(Mod,{end_per_testcase,Func},EndConf,Pid, spawn_fw_call(FwMod,FwFunc,_,_Pid,{framework_error,FwError},_,SendTo) -> FwCall = fun() -> - %% set group leader so that printouts/comments - %% from the framework get printed in the logs - group_leader(SendTo, self()), test_server_sup:framework_call(report, [framework_error, {{FwMod,FwFunc}, FwError}]), @@ -1249,17 +833,9 @@ spawn_fw_call(FwMod,FwFunc,_,_Pid,{framework_error,FwError},_,SendTo) -> spawn_link(FwCall); spawn_fw_call(Mod,Func,CurrConf,Pid,Error,Loc,SendTo) -> - {Mod1,Func1} = - case {Mod,Func,CurrConf} of - {undefined,undefined,{{M,F},_}} -> {M,F}; - _ -> {Mod,Func} - end, FwCall = fun() -> - %% set group leader so that printouts/comments - %% from the framework get printed in the logs - group_leader(SendTo, self()), - case catch fw_error_notify(Mod1,Func1,[], + case catch fw_error_notify(Mod,Func,[], Error,Loc) of {'EXIT',FwErrorNotifyErr} -> exit({fw_notify_done,error_notification, @@ -1267,8 +843,8 @@ spawn_fw_call(Mod,Func,CurrConf,Pid,Error,Loc,SendTo) -> _ -> ok end, - Conf = [{tc_status,{failed,timetrap_timeout}}], - case catch do_end_tc_call(Mod1,Func1, Loc, + Conf = [{tc_status,{failed,timetrap_timeout}}|CurrConf], + case catch do_end_tc_call(Mod,Func, {Pid,Error,[Conf]},Error) of {'EXIT',FwEndTCErr} -> exit({fw_notify_done,end_tc,FwEndTCErr}); @@ -1333,83 +909,73 @@ run_test_case_eval(Mod, Func, Args0, Name, Ref, RunInit, TimetrapData, LogOpts, TCCallback) -> put(test_server_multiply_timetraps, TimetrapData), put(test_server_logopts, LogOpts), + Where = [{Mod,Func}], + put(test_server_loc, Where), FWInitResult = test_server_sup:framework_call(init_tc,[?pl2a(Mod),Func,Args0], {ok,Args0}), - group_leader() ! {test_case_initialized,self()}, + set_tc_state(running), {{Time,Value},Loc,Opts} = case FWInitResult of {ok,Args} -> run_test_case_eval1(Mod, Func, Args, Name, RunInit, TCCallback); Error = {error,_Reason} -> - Where = {Mod,Func}, - NewResult = do_end_tc_call(Mod,Func, Where, {Error,Args0}, + NewResult = do_end_tc_call(Mod,Func, {Error,Args0}, {skip,{failed,Error}}), {{0,NewResult},Where,[]}; {fail,Reason} -> Conf = [{tc_status,{failed,Reason}} | hd(Args0)], - Where = {Mod,Func}, fw_error_notify(Mod, Func, Conf, Reason), - NewResult = do_end_tc_call(Mod,Func, Where, {{error,Reason},[Conf]}, + NewResult = do_end_tc_call(Mod,Func, {{error,Reason},[Conf]}, {fail,Reason}), {{0,NewResult},Where,[]}; Skip = {skip,_Reason} -> - Where = {Mod,Func}, - NewResult = do_end_tc_call(Mod,Func, Where, {Skip,Args0}, Skip), + NewResult = do_end_tc_call(Mod,Func, {Skip,Args0}, Skip), {{0,NewResult},Where,[]}; {auto_skip,Reason} -> - Where = {Mod,Func}, - NewResult = do_end_tc_call(Mod,Func, Where, {{skip,Reason},Args0}, + NewResult = do_end_tc_call(Mod,Func, {{skip,Reason},Args0}, {skip,Reason}), {{0,NewResult},Where,[]} end, exit({Ref,Time,Value,Loc,Opts}). run_test_case_eval1(Mod, Func, Args, Name, RunInit, TCCallback) -> - %% save current state in controller loop - sync_send(group_leader(),set_curr_conf,{{Mod,Func},hd(Args)}, - 5000, fun() -> exit(no_answer_from_group_leader) end), case RunInit of run_init -> - put(test_server_init_or_end_conf,{init_per_testcase,Func}), - put(test_server_loc, {Mod,{init_per_testcase,Func}}), + set_tc_state(init_per_testcase, hd(Args)), ensure_timetrap(Args), case init_per_testcase(Mod, Func, Args) of Skip = {skip,Reason} -> Line = get_loc(), - Conf = [{tc_status,{skipped,Reason}}], - NewRes = do_end_tc_call(Mod,Func, Line, {Skip,[Conf]}, Skip), + Conf = [{tc_status,{skipped,Reason}}|hd(Args)], + NewRes = do_end_tc_call(Mod,Func, {Skip,[Conf]}, Skip), {{0,NewRes},Line,[]}; {skip_and_save,Reason,SaveCfg} -> Line = get_loc(), - Conf = [{tc_status,{skipped,Reason}},{save_config,SaveCfg}], - NewRes = do_end_tc_call(Mod,Func, Line, {{skip,Reason},[Conf]}, + Conf = [{tc_status,{skipped,Reason}},{save_config,SaveCfg}|hd(Args)], + NewRes = do_end_tc_call(Mod,Func, {{skip,Reason},[Conf]}, {skip,Reason}), {{0,NewRes},Line,[]}; FailTC = {fail,Reason} -> % user fails the testcase EndConf = [{tc_status,{failed,Reason}} | hd(Args)], fw_error_notify(Mod, Func, EndConf, Reason), - NewRes = do_end_tc_call(Mod,Func, {Mod,Func}, + NewRes = do_end_tc_call(Mod,Func, {{error,Reason},[EndConf]}, FailTC), - {{0,NewRes},{Mod,Func},[]}; + {{0,NewRes},[{Mod,Func}],[]}; {ok,NewConf} -> - put(test_server_init_or_end_conf,undefined), %% call user callback function if defined NewConf1 = user_callback(TCCallback, Mod, Func, init, NewConf), %% save current state in controller loop - sync_send(group_leader(),set_curr_conf,{{Mod,Func},NewConf1}, - 5000, fun() -> exit(no_answer_from_group_leader) end), - put(test_server_loc, {Mod,Func}), + set_tc_state(tc, NewConf1), %% execute the test case {{T,Return},Loc} = {ts_tc(Mod, Func, [NewConf1]),get_loc()}, {EndConf,TSReturn,FWReturn} = case Return of {E,TCError} when E=='EXIT' ; E==failed -> - ModLoc = mod_loc(Loc), fw_error_notify(Mod, Func, NewConf1, - TCError, ModLoc), + TCError, Loc), {[{tc_status,{failed,TCError}}, - {tc_fail_loc,ModLoc}|NewConf1], + {tc_fail_loc,Loc}|NewConf1], Return,{error,TCError}}; SaveCfg={save_config,_} -> {[{tc_status,ok},SaveCfg|NewConf1],Return,ok}; @@ -1426,8 +992,6 @@ run_test_case_eval1(Mod, Func, Args, Name, RunInit, TCCallback) -> %% call user callback function if defined EndConf1 = user_callback(TCCallback, Mod, Func, 'end', EndConf), %% update current state in controller loop - sync_send(group_leader(),set_curr_conf,EndConf1, 5000, - fun() -> exit(no_answer_from_group_leader) end), {FWReturn1,TSReturn1,EndConf2} = case end_per_testcase(Mod, Func, EndConf1) of SaveCfg1={save_config,_} -> @@ -1447,24 +1011,21 @@ run_test_case_eval1(Mod, Func, Args, Name, RunInit, TCCallback) -> {FWReturn,TSReturn,EndConf1} end, %% clear current state in controller loop - sync_send(group_leader(),set_curr_conf,undefined, - 5000, fun() -> exit(no_answer_from_group_leader) end), - put(test_server_init_or_end_conf,undefined), - case do_end_tc_call(Mod,Func, Loc, + case do_end_tc_call(Mod,Func, {FWReturn1,[EndConf2]}, TSReturn1) of {failed,Reason} = NewReturn -> fw_error_notify(Mod,Func,EndConf2, Reason), - {{T,NewReturn},{Mod,Func},[]}; + {{T,NewReturn},[{Mod,Func}],[]}; NewReturn -> {{T,NewReturn},Loc,[]} end end; skip_init -> + set_tc_state(running, hd(Args)), %% call user callback function if defined Args1 = user_callback(TCCallback, Mod, Func, init, Args), ensure_timetrap(Args1), %% ts_tc does a catch - put(test_server_loc, {Mod,Func}), %% if this is a named conf group, the test case (init or end conf) %% should be called with the name as the first argument Args2 = if Name == undefined -> Args1; @@ -1475,43 +1036,12 @@ run_test_case_eval1(Mod, Func, Args, Name, RunInit, TCCallback) -> %% call user callback function if defined Return1 = user_callback(TCCallback, Mod, Func, 'end', Return), {Return2,Opts} = process_return_val([Return1], Mod, Func, - Args1, {Mod,Func}, Return1), + Args1, [{Mod,Func}], Return1), {{T,Return2},Loc,Opts} end. -do_end_tc_call(M,F, Loc, Res, Return) -> - IsSuite = case lists:reverse(atom_to_list(M)) of - [$E,$T,$I,$U,$S,$_|_] -> true; - _ -> false - end, +do_end_tc_call(Mod, Func, Res, Return) -> FwMod = os:getenv("TEST_SERVER_FRAMEWORK"), - {Mod,Func} = - if FwMod == M ; FwMod == "undefined"; FwMod == false -> - {M,F}; - (not IsSuite) and is_list(Loc) and (length(Loc)>1) -> - %% If failure in other module (M) than suite, try locate - %% suite name in Loc list and call end_tc with Suite:TestCase - %% instead of M:F. - GetSuite = fun(S,TC) -> - case lists:reverse(atom_to_list(S)) of - [$E,$T,$I,$U,$S,$_|_] -> [{S,TC}]; - _ -> [] - end - end, - case lists:flatmap(fun({S,TC,_}) -> GetSuite(S,TC); - ({{S,TC},_}) -> GetSuite(S,TC); - ({S,TC}) -> GetSuite(S,TC); - (_) -> [] - end, Loc) of - [] -> - {M,F}; - [FoundSuite|_] -> - FoundSuite - end; - true -> - {M,F} - end, - Ref = make_ref(), if FwMod == "ct_framework" ; FwMod == "undefined"; FwMod == false -> case test_server_sup:framework_call( @@ -1553,7 +1083,7 @@ process_return_val([Return], M,F,A, Loc, Final) when is_list(Return) -> true -> % must be return value from end conf case process_return_val1(Return, M,F,A, Loc, Final, []); false -> % must be Config value from init conf case - case do_end_tc_call(M, F, Loc, {ok,A}, Return) of + case do_end_tc_call(M, F, {ok,A}, Return) of {failed, FWReason} = Failed -> fw_error_notify(M,F,A, FWReason), {Failed, []}; @@ -1569,9 +1099,9 @@ process_return_val(Return, M,F,A, Loc, Final) -> process_return_val1([Failed={E,TCError}|_], M,F,A=[Args], Loc, _, SaveOpts) when E=='EXIT'; E==failed -> - fw_error_notify(M,F,A, TCError, mod_loc(Loc)), - case do_end_tc_call(M,F, Loc, {{error,TCError}, - [[{tc_status,{failed,TCError}}|Args]]}, + fw_error_notify(M,F,A, TCError, Loc), + case do_end_tc_call(M,F, {{error,TCError}, + [[{tc_status,{failed,TCError}}|Args]]}, Failed) of {failed,FWReason} -> {{failed,FWReason},SaveOpts}; @@ -1589,8 +1119,8 @@ process_return_val1([RetVal={Tag,_}|Opts], M,F,A, Loc, _, SaveOpts) when Tag==sk process_return_val1(Opts, M,F,A, Loc, RetVal, SaveOpts); process_return_val1([_|Opts], M,F,A, Loc, Final, SaveOpts) -> process_return_val1(Opts, M,F,A, Loc, Final, SaveOpts); -process_return_val1([], M,F,A, Loc, Final, SaveOpts) -> - case do_end_tc_call(M,F, Loc, {Final,A}, Final) of +process_return_val1([], M,F,A, _Loc, Final, SaveOpts) -> + case do_end_tc_call(M,F, {Final,A}, Final) of {failed,FWReason} -> {{failed,FWReason},SaveOpts}; NewReturn -> @@ -1656,7 +1186,7 @@ do_init_per_testcase(Mod, Args) -> throw:Other -> set_loc(erlang:get_stacktrace()), Line = get_loc(), - FormattedLoc = test_server_sup:format_loc(mod_loc(Line)), + FormattedLoc = test_server_sup:format_loc(Line), group_leader() ! {printout,12, "ERROR! init_per_testcase thrown!\n" "\tLocation: ~s\n\tReason: ~p\n", @@ -1667,7 +1197,7 @@ do_init_per_testcase(Mod, Args) -> Reason = {Reason0,Stk}, set_loc(Stk), Line = get_loc(), - FormattedLoc = test_server_sup:format_loc(mod_loc(Line)), + FormattedLoc = test_server_sup:format_loc(Line), group_leader() ! {printout,12, "ERROR! init_per_testcase crashed!\n" "\tLocation: ~s\n\tReason: ~p\n", @@ -1690,8 +1220,7 @@ end_per_testcase(Mod, Func, Conf) -> end. do_end_per_testcase(Mod,EndFunc,Func,Conf) -> - put(test_server_init_or_end_conf,{EndFunc,Func}), - put(test_server_loc, {Mod,{EndFunc,Func}}), + set_tc_state(end_per_testcase, Conf), try Mod:EndFunc(Func, Conf) of {save_config,_}=SaveCfg -> SaveCfg; @@ -1715,8 +1244,7 @@ do_end_per_testcase(Mod,EndFunc,Func,Conf) -> "Reason: ~p\n" "Line: ~s\n", [EndFunc, Other, - test_server_sup:format_loc( - mod_loc(get_loc()))]}, + test_server_sup:format_loc(get_loc())]}, {failed,{Mod,end_per_testcase,Other}}; Class:Reason -> Stk = erlang:get_stacktrace(), @@ -1738,8 +1266,7 @@ do_end_per_testcase(Mod,EndFunc,Func,Conf) -> "Reason: ~p\n" "Line: ~s\n", [EndFunc, Reason, - test_server_sup:format_loc( - mod_loc(get_loc()))]}, + test_server_sup:format_loc(get_loc())]}, {failed,{Mod,end_per_testcase,Why}} end. @@ -1752,66 +1279,19 @@ get_loc(Pid) -> lists:foreach(fun({Key,Val}) -> put(Key, Val) end, Dict), Stk = [rewrite_loc_item(Loc) || Loc <- Stk0], case get(test_server_loc) of - undefined -> - put(test_server_loc, Stk); - {Suite,Case} -> + [{Suite,Case}] -> %% location info unknown, check if {Suite,Case,Line} %% is available in stacktrace. and if so, use stacktrace - %% instead of currect test_server_loc + %% instead of current test_server_loc case [match || {S,C,_L} <- Stk, S == Suite, C == Case] of [match|_] -> put(test_server_loc, Stk); _ -> ok end; _ -> - ok + put(test_server_loc, Stk) end, get_loc(). -%% find the latest known Suite:Testcase -get_mf(MFs) -> - get_mf(MFs, {undefined,undefined}). - -get_mf([MF|MFs], _Found) when is_tuple(MF) -> - ModFunc = {Mod,_} = case MF of - {M,F,_} -> {M,F}; - MF -> MF - end, - case is_suite(Mod) of - true -> ModFunc; - false -> get_mf(MFs, ModFunc) - end; -get_mf(_, Found) -> - Found. - -is_suite(Mod) -> - case lists:reverse(atom_to_list(Mod)) of - "ETIUS" ++ _ -> true; - _ -> false - end. - -mod_loc(Loc) -> - %% handle diff line num versions - case Loc of - [{{_M,_F},_L}|_] -> - [begin if L /= 0 -> {?pl2a(M),F,L}; - true -> {?pl2a(M),F} end end || {{M,F},L} <- Loc]; - [{_M,_F}|_] -> - [{?pl2a(M),F} || {M,F} <- Loc]; - {{M,F},0} -> - [{?pl2a(M),F}]; - {{M,F},L} -> - [{?pl2a(M),F,L}]; - {M,ForL} -> - [{?pl2a(M),ForL}]; - {M,F,0} -> - [{M,F}]; - [{M,F,0}|Stack] -> - [{M,F}|Stack]; - _ -> - Loc - end. - - fw_error_notify(Mod, Func, Args, Error) -> test_server_sup:framework_call(error_notification, [?pl2a(Mod),Func,[Args], @@ -1833,10 +1313,10 @@ fw_error_notify(Mod, Func, Args, Error, Loc) -> %% is directed to console, major and/or minor log files. print(Detail,Format,Args) -> - local_or_remote_apply({test_server_ctrl,print,[Detail,Format,Args]}). + test_server_ctrl:print(Detail, Format, Args). print(Detail,Format,Args,Printer) -> - local_or_remote_apply({test_server_ctrl,print,[Detail,Format,Args,Printer]}). + test_server_ctrl:print(Detail, Format, Args, Printer). %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% print_timsteamp(Detail,Leader) -> ok @@ -1846,7 +1326,7 @@ print(Detail,Format,Args,Printer) -> %% log files. print_timestamp(Detail,Leader) -> - local_or_remote_apply({test_server_ctrl,print_timestamp,[Detail,Leader]}). + test_server_ctrl:print_timestamp(Detail, Leader). %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% @@ -1894,7 +1374,12 @@ ts_tc(M, F, A) -> {Elapsed, Result}. set_loc(Stk) -> - Loc = [rewrite_loc_item(I) || {_,_,_,_}=I <- Stk], + Loc = case [rewrite_loc_item(I) || {_,_,_,_}=I <- Stk] of + [{M,F,0}|Stack] -> + [{M,F}|Stack]; + Other -> + Other + end, put(test_server_loc, Loc). rewrite_loc_item({M,F,_,Loc}) -> @@ -1908,16 +1393,6 @@ rewrite_loc_item({M,F,_,Loc}) -> %% Note: Some of these functions have been moved to test_server_sup %% %% in an attempt to keep this modules small (yeah, right!) %% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -unicode_to_latin1(Chars) when is_list(Chars); is_binary(Chars) -> - lists:flatten( - [ case X of - High when High > 255 -> - io_lib:format("\\{~.8B}",[X]); - Low -> - Low - end || X <- unicode:characters_to_list(Chars,unicode) ]); -unicode_to_latin1(Garbage) -> - Garbage. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% format(Format) -> IoLibReturn @@ -2170,28 +1645,19 @@ continue(Pid) when is_pid(Pid) -> %% %% Returns the amount to scale timetraps with. +%% {X, fun() -> check() end} <- multiply scale with X if Fun() is true timetrap_scale_factor() -> - F0 = case test_server:purify_is_running() of - true -> 5; - false -> 1 - end, - F1 = case {is_debug(), has_lock_checking()} of - {true,_} -> 6 * F0; - {false,true} -> 2 * F0; - {false,false} -> F0 - end, - F2 = case has_superfluous_schedulers() of - true -> 3*F1; - false -> F1 - end, - F = case test_server_sup:get_os_family() of - vxworks -> 5 * F2; - _ -> F2 - end, - case test_server:is_cover() of - true -> 10 * F; - false -> F - end. + timetrap_scale_factor([ + { 2, fun() -> has_lock_checking() end}, + { 3, fun() -> has_superfluous_schedulers() end}, + { 5, fun() -> purify_is_running() end}, + { 6, fun() -> is_debug() end}, + {10, fun() -> is_cover() end} + ]). + +timetrap_scale_factor(Scales) -> + %% The fun in {S, Fun} a filter input to the list comprehension + lists:foldl(fun(S,O) -> O*S end, 1, [ S || {S,F} <- Scales, F()]). %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% @@ -2519,11 +1985,7 @@ get_timetrap_info(TCPid, SendToServer) -> [I|_] -> I; [] when SendToServer == true -> - MsgLooper = group_leader(), - MsgLooper ! {get_timetrap_info,TCPid,self()}, - receive - {MsgLooper,get_timetrap_info,I} -> I - end; + tc_supervisor_req({get_timetrap_info,TCPid}); [] -> undefined end @@ -2542,17 +2004,29 @@ hours(N) -> trunc(N * 1000 * 60 * 60). minutes(N) -> trunc(N * 1000 * 60). seconds(N) -> trunc(N * 1000). - %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% sync_send(Pid,Tag,Msg,Timeout,DoAfter) -> Result +%% tc_supervisor_req(Tag) -> Result +%% tc_supervisor_req(Tag, Msg) -> Result %% -sync_send(Pid,Tag,Msg,Timeout,DoAfter) -> + +tc_supervisor_req(Tag) -> + Pid = test_server_gl:get_tc_supervisor(group_leader()), + Pid ! {Tag,self()}, + receive + {Pid,Tag,Result} -> + Result + after 5000 -> + error(no_answer_from_tc_supervisor) + end. + +tc_supervisor_req(Tag, Msg) -> + Pid = test_server_gl:get_tc_supervisor(group_leader()), Pid ! {Tag,self(),Msg}, receive {Pid,Tag,Result} -> Result - after Timeout -> - DoAfter() + after 5000 -> + error(no_answer_from_tc_supervisor) end. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% @@ -2714,7 +2188,10 @@ start_node(Name, Type, Options) -> %% by a shielded node. Cover = case is_cover() of true -> - not is_shielded(Name) andalso same_version(Node); + not is_shielded(Name) + andalso same_version(Node) + andalso proplists:get_value(start_cover,Options, + true); false -> false end, @@ -2722,9 +2199,7 @@ start_node(Name, Type, Options) -> net_adm:ping(Node), case Cover of true -> - Sticky = unstick_all_sticky(Node), - cover:start(Node), - stick_all_sticky(Node,Sticky); + do_cover_for_node(Node,start); _ -> ok end, @@ -2752,7 +2227,27 @@ wait_for_node(Slave) -> group_leader() ! {sync_apply, self(), {test_server_ctrl,wait_for_node,[Slave]}}, - receive {sync_result,R} -> R end. + Result = receive {sync_result,R} -> R end, + case Result of + ok -> + Cover = case is_cover() of + true -> + not is_shielded(Slave) andalso same_version(Slave); + false -> + false + end, + + net_adm:ping(Slave), + case Cover of + true -> + do_cover_for_node(Slave,start); + _ -> + ok + end; + _ -> + ok + end, + Result. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% @@ -2764,9 +2259,7 @@ stop_node(Slave) -> Nocover = is_shielded(Slave) orelse not same_version(Slave), case is_cover() of true when not Nocover -> - Sticky = unstick_all_sticky(Slave), - cover:stop(Slave), - stick_all_sticky(Slave,Sticky); + do_cover_for_node(Slave,flush); _ -> ok end, @@ -2947,13 +2440,7 @@ comment(String) -> %% Read the current comment string stored in %% state during test case execution. read_comment() -> - MsgLooper = group_leader(), - MsgLooper ! {read_comment,self()}, - receive - {MsgLooper,read_comment,Comment} -> Comment - after - 5000 -> "" - end. + tc_supervisor_req(read_comment). %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% make_priv_dir() -> ok @@ -2961,13 +2448,7 @@ read_comment() -> %% Order test server to create the private directory %% for the current test case. make_priv_dir() -> - MsgLooper = group_leader(), - group_leader() ! {make_priv_dir,self()}, - receive - {MsgLooper,make_priv_dir,Result} -> Result - after - 5000 -> error - end. + tc_supervisor_req(make_priv_dir). %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% os_type() -> OsType @@ -2975,7 +2456,7 @@ make_priv_dir() -> %% Returns the OsType of the target node. OsType is %% the same as returned from os:type() os_type() -> - test_server_ctrl:get_target_os_type(). + os:type(). %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% @@ -3094,47 +2575,9 @@ purify_format(Format, Args) -> %% %% Generic send functions for communication with host %% -sync_local_or_remote_apply(Proxy,From,{M,F,A} = MFA) -> - case get(test_server_job_sock) of - undefined -> - %% i'm a local target - Result = apply(M,F,A), - if is_pid(Proxy) -> Proxy ! {sync_result_proxy,From,Result}; - true -> From ! {sync_result,Result} - end; - JobSock -> - %% i'm a remote target - request(JobSock,{sync_apply,MFA}), - {sync_result,Result} = recv(JobSock), - if is_pid(Proxy) -> Proxy ! {sync_result_proxy,From,Result}; - true -> From ! {sync_result,Result} - end - end. -local_or_remote_apply({M,F,A} = MFA) -> - case get(test_server_job_sock) of - undefined -> - %% i'm a local target - apply(M,F,A), - ok; - JobSock -> - %% i'm a remote target - request(JobSock,{apply,MFA}), - ok - end. - -request(Sock,Request) -> - gen_tcp:send(Sock,<<1,(term_to_binary(Request))/binary>>). - -%% -%% Generic receive function for communication with host -%% -recv(Sock) -> - case gen_tcp:recv(Sock,0) of - {error,closed} -> - gen_tcp:close(Sock), - exit(connection_lost); - {ok,<<1,Request/binary>>} -> - binary_to_term(Request); - {ok,<<0,B/binary>>} -> - B +sync_local_or_remote_apply(Proxy, From, {M,F,A}) -> + %% i'm a local target + Result = apply(M, F, A), + if is_pid(Proxy) -> Proxy ! {sync_result_proxy,From,Result}; + true -> From ! {sync_result,Result} end. diff --git a/lib/test_server/src/test_server_ctrl.erl b/lib/test_server/src/test_server_ctrl.erl index df2187bc04..bc08c12089 100644 --- a/lib/test_server/src/test_server_ctrl.erl +++ b/lib/test_server/src/test_server_ctrl.erl @@ -34,118 +34,6 @@ %% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% ARCHITECTURE -%% -%% The Erlang Test Server can be run on the target machine (local target) -%% or towards a remote target. The execution flow is mainly the same in -%% both cases, but with a remote target the test cases are (obviously) -%% executed on the target machine. Host and target communicates over -%% socket connections because the host should not be introduced as an -%% additional node in the distributed erlang system in which the test -%% cases are run. -%% -%% -%% Local Target: -%% ============= -%% -%% ----- -%% | | test_server_ctrl ({global,test_server}) -%% ----- (test_server_ctrl.erl) -%% | -%% | -%% ----- -%% | | JobProc -%% ----- (test_server_ctrl.erl and test_server.erl) -%% | -%% | -%% ----- -%% | | CaseProc -%% ----- (test_server.erl) -%% -%% -%% -%% test_server_ctrl is the main process in the system. It is a registered -%% process, and it will always be alive when testing is ongoing. -%% test_server_ctrl initiates testing and monitors JobProc(s). -%% -%% When target is local, and Test Server is *not* being used by a framework -%% application (where it might cause duplicate name problems in a distributed -%% test environment), the process is globally registered as 'test_server' -%% to be able to simulate the {global,test_server} process on a remote target. -%% -%% JobProc is spawned for each 'job' added to the test_server_ctrl. -%% A job can mean one test case, one test suite or one spec. -%% JobProc creates and writes logs and presents results from testing. -%% JobProc is the group leader for CaseProc. -%% -%% CaseProc is spawned for each test case. It runs the test case and -%% sends results and any other information to its group leader - JobProc. -%% -%% -%% -%% Remote Target: -%% ============== -%% -%% HOST TARGET -%% -%% ----- MainSock ----- -%% test_server_ctrl | |- - - - - - -| | {global,test_server} -%% (test_server_ctrl.erl) ----- ----- (test_server.erl) -%% | | -%% | | -%% ----- JobSock ----- -%% JobProcH | |- - - - - - -| | JobProcT -%% (test_server_ctrl.erl) ----- ----- (test_server.erl) -%% | -%% | -%% ----- -%% | | CaseProc -%% ----- (test_server.erl) -%% -%% -%% -%% -%% A separate test_server process only exists when target is remote. It -%% is then the main process on target. It is started when test_server_ctrl -%% is started, and a socket connection is established between -%% test_server_ctrl and test_server. The following information can be sent -%% over MainSock: -%% -%% HOST TARGET -%% -> {target_info, TargetInfo} (during initiation) -%% <- {job_proc_killed,Name,Reason} (if a JobProcT dies unexpectedly) -%% -> {job,Port,Name} (to start a new JobProcT) -%% -%% -%% When target is remote, JobProc is split into to processes: JobProcH -%% executing on Host and JobProcT executing on Target. (The two processes -%% execute the same code as JobProc does when target is local.) JobProcH -%% and JobProcT communicates over a socket connection. The following -%% information can be sent over JobSock: -%% -%% HOST TARGET -%% -> {test_case, Case} To start a new test case -%% -> {beam,Mod} .beam file as binary to be loaded -%% on target, e.g. a test suite -%% -> {datadir,Tarfile} Content of the datadir for a test suite -%% <- {apply,MFA} MFA to be applied on host, ignore return; -%% (apply is used for printing information in -%% log or console) -%% <- {sync_apply,MFA} MFA to be applied on host, wait for return -%% (used for starting and stopping slave nodes) -%% -> {sync_apply,MFA} MFA to be applied on target, wait for return -%% (used for cover compiling and analysing) -%% <-> {sync_result,Result} Return value from sync_apply -%% <- {test_case_result,Result} When a test case is finished -%% <- {crash_dumps,Tarfile} When a test case is finished -%% -> job_done When a job is finished -%% <- {privdir,Privdir} When a job is finished -%% -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - - - %%% SUPERVISOR INTERFACE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -export([start/0, start/1, start_link/1, stop/0]). @@ -165,19 +53,18 @@ -export([reject_io_reqs/1, get_levels/0, set_levels/3]). -export([multiply_timetraps/1, scale_timetraps/1, get_timetrap_parameters/0]). -export([create_priv_dir/1]). --export([cover/2, cover/3, cover/7, - cross_cover_analyse/1, cross_cover_analyse/2, trc/1, stop_trace/0]). +-export([cover/2, cover/3, cover/8, + cross_cover_analyse/2, cross_cover_analyse/3, trc/1, stop_trace/0]). -export([testcase_callback/1]). -export([set_random_seed/1]). -export([kill_slavenodes/0]). %%% TEST_SERVER INTERFACE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% --export([output/2, print/2, print/3, print/4, print_timestamp/2]). +-export([print/2, print/3, print/4, print_timestamp/2]). -export([start_node/3, stop_node/1, wait_for_node/1, is_release_available/1]). -export([format/1, format/2, format/3, to_string/1]). -export([get_target_info/0]). -export([get_hosts/0]). --export([get_target_os_type/0]). -export([node_started/1]). %%% DEBUGGER INTERFACE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% @@ -203,6 +90,7 @@ -define(coverlog_name, "cover.html"). -define(cross_coverlog_name, "cross_cover.html"). -define(cover_total, "total_cover.log"). +-define(unexpected_io_log, "unexpected_io.log"). -define(last_file, "last_name"). -define(last_link, "last_link"). -define(last_test, "last_test"). @@ -430,14 +318,6 @@ run_test(CommandLine) -> testcase_callback(TCCB), add_job(Name, {command_line,SpecList}), - %% adding of jobs involves file i/o which may take long time - %% when running a nfs mounted file system (VxWorks). - case controller_call(get_target_info) of - #target_info{os_family=vxworks} -> - receive after 30000 -> ready_to_wait end; - _ -> - wait_now - end, wait_finish(). %% Converted CoverFile to a string unless it is 'none' @@ -470,8 +350,7 @@ wait_finish() -> ok. abort_current_testcase(Reason) -> - controller_call({abort_current_testcase,Reason}), - ok. + controller_call({abort_current_testcase,Reason}). abort() -> OldTrap = process_flag(trap_exit, true), @@ -528,9 +407,9 @@ cover(App, Analyse) when is_atom(App) -> cover(CoverFile, Analyse) -> cover(none, CoverFile, Analyse). cover(App, CoverFile, Analyse) -> - controller_call({cover,{App,CoverFile},Analyse}). -cover(App, CoverFile, Exclude, Include, Cross, Export, Analyse) -> - controller_call({cover,{App,{CoverFile,Exclude,Include,Cross,Export}},Analyse}). + controller_call({cover,{App,CoverFile},Analyse,true}). +cover(App, CoverFile, Exclude, Include, Cross, Export, Analyse, Stop) -> + controller_call({cover,{App,{CoverFile,Exclude,Include,Cross,Export}},Analyse,Stop}). testcase_callback(ModFunc) -> controller_call({testcase_callback,ModFunc}). @@ -544,20 +423,6 @@ kill_slavenodes() -> get_hosts() -> get(test_server_hosts). -get_target_os_type() -> - case whereis(?MODULE) of - undefined -> - %% This is probably called on the target node - os:type(); - Pid when Pid =:= self() -> - os:type(); - _pid -> - %% This is called on the controller, e.g. from a - %% specification clause of a test case - #target_info{os_type=OsType} = controller_call(get_target_info), - OsType - end. - %%-------------------------------------------------------------------- add_job(Name, TopCase) -> @@ -613,7 +478,7 @@ controller_call(Arg, Timeout) -> %% Mode 'lazy' ignores (and resets to []) any jobs in the state file %% -init([Param]) -> +init([_]) -> case os:getenv("TEST_SERVER_CALL_TRACE") of false -> ok; @@ -639,104 +504,14 @@ init([Param]) -> test_server_sup:cleanup_crash_dumps(), State = #state{jobs=[],finish=false}, put(test_server_free_targets,[]), - case contact_main_target(Param) of - {ok,TI} -> - ets:new(slave_tab, [named_table,set,public,{keypos,2}]), - set_hosts([TI#target_info.host]), - {ok,State#state{target_info=TI}}; - {error,Reason} -> - {stop,Reason} - end. - - -%% If the test is to be run at a remote target, this function sets up -%% a socket communication with the target. -contact_main_target(local) -> - %% When used by a general framework, global registration of - %% test_server should not be required. - case get_fw_mod(undefined) of - undefined -> - %% Local target! The global test_server process implemented by - %% test_server.erl will not be started, so we simulate it by - %% globally registering this process instead. - global:sync(), - case global:whereis_name(test_server) of - undefined -> - global:register_name(test_server, self()); - Pid -> - case node() of - N when N == node(Pid) -> - io:format(user, "Warning: test_server already running!\n", []), - global:re_register_name(test_server,self()); - _ -> - ok - end - end; - _ -> - ok - end, - TI = test_server:init_target_info(), + TI0 = test_server:init_target_info(), TargetHost = test_server_sup:hoststr(), - {ok,TI#target_info{where=local, - host=TargetHost, - naming=naming(), - master=TargetHost}}; - -contact_main_target(ParameterFile) -> - case read_parameters(ParameterFile) of - {ok,Par} -> - case test_server_node:start_remote_main_target(Par) of - {ok,TI} -> - {ok,TI}; - {error,Error} -> - {error,{could_not_start_main_target,Error}} - end; - {error,Error} -> - {error,{could_not_read_parameterfile,Error}} - end. - -read_parameters(File) -> - case file:consult(File) of - {ok,Data} -> - read_parameters(lists:flatten(Data), #par{naming=naming()}); - Error -> - Error - end. -read_parameters([{type,Type}|Data], Par) -> % mandatory - read_parameters(Data, Par#par{type=Type}); -read_parameters([{target,Target}|Data], Par) -> % mandatory - read_parameters(Data, Par#par{target=cast_to_list(Target)}); -read_parameters([{slavetargets,SlaveTargets}|Data], Par) -> - read_parameters(Data, Par#par{slave_targets=SlaveTargets}); -read_parameters([{longnames,Bool}|Data], Par) -> - Naming = if Bool->"-name"; true->"-sname" end, - read_parameters(Data, Par#par{naming=Naming}); -read_parameters([{master,{Node,Cookie}}|Data], Par) -> - read_parameters(Data, Par#par{master=cast_to_list(Node), - cookie=cast_to_list(Cookie)}); -read_parameters([Other|_Data], _Par) -> - {error,{illegal_parameter,Other}}; -read_parameters([], Par) when Par#par.type==undefined -> - {error, {missing_mandatory_parameter,type}}; -read_parameters([], Par) when Par#par.target==undefined -> - {error, {missing_mandatory_parameter,target}}; -read_parameters([], Par0) -> - Par = - case {Par0#par.type, Par0#par.master} of - {ose, undefined} -> - %% Use this node as master and bootserver for target - %% and slave nodes - Par0#par{master = atom_to_list(node()), - cookie = atom_to_list(erlang:get_cookie())}; - {ose, _Master} -> - %% Master for target and slave nodes was defined in parameterfile - Par0; - _ -> - %% Use target as master for slave nodes, - %% (No master is used for target) - Par0#par{master="test_server@" ++ Par0#par.target} - end, - {ok,Par}. + TI = TI0#target_info{host=TargetHost, + naming=naming(), + master=TargetHost}, + ets:new(slave_tab, [named_table,set,public,{keypos,2}]), + set_hosts([TI#target_info.host]), + {ok,State#state{target_info=TI}}. naming() -> case lists:member($., test_server_sup:hoststr()) of @@ -803,7 +578,7 @@ handle_call({add_job,Dir,Name,TopCase,Skip}, _From, State) -> ExtraTools = case State#state.cover of false -> []; - {App,Analyse} -> [{cover,App,Analyse}] + {App,Analyse,Stop} -> [{cover,App,Analyse,Stop}] end, ExtraTools1 = case State#state.random_seed of @@ -1059,13 +834,13 @@ handle_call(stop_trace, _From, State) -> {reply,R,State#state{trc=false}}; %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% handle_call({cover,App,Analyse}, _, State) -> ok | {error,Reason} +%% handle_call({cover,App,Analyse,Stop}, _, State) -> ok | {error,Reason} %% %% All modules inn application App are cover compiled %% Analyse indicates on which level the coverage should be analysed -handle_call({cover,App,Analyse}, _From, State) -> - {reply,ok,State#state{cover={App,Analyse}}}; +handle_call({cover,App,Analyse,Stop}, _From, State) -> + {reply,ok,State#state{cover={App,Analyse,Stop}}}; %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% handle_call({create_priv_dir,Value}, _, State) -> ok | {error,Reason} @@ -1217,25 +992,17 @@ handle_cast({node_started,Node}, State) -> %% Pid = pid() %% Reason = term() %% -%% Handles exit messages from linked processes. Only test suites and -%% possibly a target client are expected to be linked. -%% When a test suite terminates, it is removed from the job queue. -%% If a target client terminates it means that we lost contact with -%% target. The test_server_ctrl process is terminated, and teminate/2 -%% will do the cleanup +%% Handles exit messages from linked processes. Only test suites are +%% expected to be linked. When a test suite terminates, it is removed +%% from the job queue. If a target client terminates it means that we +%% lost contact with target. The test_server_ctrl process is +%% terminated, and teminate/2 will do the cleanup handle_info({'EXIT',Pid,Reason}, State) -> case lists:keysearch(Pid,2,State#state.jobs) of false -> - TI = State#state.target_info, - case TI#target_info.target_client of - Pid -> - %% The target client died - lost contact with target - {stop,{lost_contact_with_target,Reason},State}; - _other -> - %% not our problem - {noreply,State} - end; + %% not our problem + {noreply,State}; {value,{Name,_}} -> NewJobs = lists:keydelete(Pid, 2, State#state.jobs), case Reason of @@ -1310,14 +1077,8 @@ handle_info({tcp_closed,Sock}, State=#state{trc=Sock}) -> %%! Maybe print something??? {noreply,State#state{trc=false}}; handle_info({tcp_closed,Sock}, State) -> - case test_server_node:nodedown(Sock,State#state.target_info) of - target_died -> - %% terminate/2 will do the cleanup - {stop,target_died,State}; - _ -> - {noreply,State} - end; - + test_server_node:nodedown(Sock, State#state.target_info), + {noreply,State}; handle_info(_, State) -> %% dummy; accept all, do nothing. {noreply, State}. @@ -1378,24 +1139,22 @@ kill_all_jobs([]) -> spawn_tester(Mod, Func, Args, Dir, Name, Levels, RejectIoReqs, CreatePrivDir, TCCallback, ExtraTools) -> - spawn_link( - fun() -> init_tester(Mod, Func, Args, Dir, Name, Levels, RejectIoReqs, + spawn_link(fun() -> + init_tester(Mod, Func, Args, Dir, Name, Levels, RejectIoReqs, CreatePrivDir, TCCallback, ExtraTools) end). -init_tester(Mod, Func, Args, Dir, Name, {SumLev,MajLev,MinLev}, RejectIoReqs, - CreatePrivDir, TCCallback, ExtraTools) -> +init_tester(Mod, Func, Args, Dir, Name, {_,_,MinLev}=Levels, + RejectIoReqs, CreatePrivDir, TCCallback, ExtraTools) -> process_flag(trap_exit, true), + test_server_io:start_link(), put(test_server_name, Name), put(test_server_dir, Dir), put(test_server_total_time, 0), put(test_server_ok, 0), put(test_server_failed, 0), put(test_server_skipped, {0,0}), - put(test_server_summary_level, SumLev), - put(test_server_major_level, MajLev), put(test_server_minor_level, MinLev), - put(test_server_reject_io_reqs, RejectIoReqs), put(test_server_create_priv_dir, CreatePrivDir), put(test_server_random_seed, proplists:get_value(random_seed, ExtraTools)), put(test_server_testcase_callback, TCCallback), @@ -1411,23 +1170,30 @@ init_tester(Mod, Func, Args, Dir, Name, {SumLev,MajLev,MinLev}, RejectIoReqs, put(test_server_framework_name, list_to_atom(FWName)) end end, + %% before first print, read and set logging options LogOpts = test_server_sup:framework_call(get_logopts, [], []), put(test_server_logopts, LogOpts), - put(test_server_log_nl, not lists:member(no_nl, LogOpts)), + StartedExtraTools = start_extra_tools(ExtraTools), + + test_server_io:set_job_name(Name), + test_server_io:set_gl_props([{levels,Levels}, + {auto_nl,not lists:member(no_nl, LogOpts)}, + {reject_io_reqs,RejectIoReqs}]), + group_leader(test_server_io:get_gl(true), self()), {TimeMy,Result} = ts_tc(Mod, Func, Args), - put(test_server_common_io_handler, undefined), - stop_extra_tools(StartedExtraTools), + set_io_buffering(undefined), + test_server_io:set_job_name(undefined), + catch stop_extra_tools(StartedExtraTools), case Result of {'EXIT',test_suites_done} -> - print(25, "DONE, normal exit", []); + ok; {'EXIT',_Pid,Reason} -> print(1, "EXIT, reason ~p", [Reason]); {'EXIT',Reason} -> - print(1, "EXIT, reason ~p", [Reason]); - _Other -> - print(25, "DONE", []) + report_severe_error(Reason), + print(1, "EXIT, reason ~p", [Reason]) end, Time = TimeMy/1000000, SuccessStr = @@ -1446,7 +1212,11 @@ init_tester(Mod, Func, Args, Dir, Name, {SumLev,MajLev,MinLev}, RejectIoReqs, "<tr><td></td><td><b>TOTAL</b></td><td></td><td></td><td></td>" "<td>~.3fs</td><td><b>~s</b></td><td>~p Ok, ~p Failed~s of ~p</td></tr>\n" "</tfoot>\n", - [Time,SuccessStr,OkN,FailedN,SkipStr,OkN+FailedN+SkippedN]). + [Time,SuccessStr,OkN,FailedN,SkipStr,OkN+FailedN+SkippedN]), + test_server_io:stop(). + +report_severe_error(Reason) -> + test_server_sup:framework_call(report, [severe_error,Reason]). %% timer:tc/3 ts_tc(M, F, A) -> @@ -1464,11 +1234,11 @@ elapsed_time(Before, After) -> start_extra_tools(ExtraTools) -> start_extra_tools(ExtraTools, []). -start_extra_tools([{cover,App,Analyse} | ExtraTools], Started) -> +start_extra_tools([{cover,App,Analyse,Stop} | ExtraTools], Started) -> case cover_compile(App) of {ok,AnalyseMods} -> start_extra_tools(ExtraTools, - [{cover,App,Analyse,AnalyseMods}|Started]); + [{cover,App,Analyse,AnalyseMods,Stop}|Started]); {error,_} -> start_extra_tools(ExtraTools, Started) end; @@ -1487,8 +1257,8 @@ stop_extra_tools(ExtraTools) -> end, stop_extra_tools(ExtraTools, TestDir). -stop_extra_tools([{cover,App,Analyse,AnalyseMods}|ExtraTools], TestDir) -> - cover_analyse(App, Analyse, AnalyseMods, TestDir), +stop_extra_tools([{cover,App,Analyse,AnalyseMods,Stop}|ExtraTools], TestDir) -> + cover_analyse(App, Analyse, AnalyseMods, Stop, TestDir), stop_extra_tools(ExtraTools, TestDir); %%stop_extra_tools([_ | ExtraTools], TestDir) -> %% stop_extra_tools(ExtraTools, TestDir); @@ -1820,8 +1590,9 @@ do_test_cases(TopCases, SkipCases, print(html, "<p><ul>\n" "<li><a href=\"~s\">Full textual log</a></li>\n" - "<li><a href=\"~s\">Coverage log</a></li>\n</ul></p>\n", - [?suitelog_name,?coverlog_name]), + "<li><a href=\"~s\">Coverage log</a></li>\n" + "<li><a href=\"~s\">Unexpected I/O log</a></li>\n</ul></p>\n", + [?suitelog_name,?coverlog_name,?unexpected_io_log]), print(html, "<p>~s</p>\n" ++ xhtml("<table bgcolor=\"white\" border=\"3\" cellpadding=\"5\">", @@ -1881,7 +1652,7 @@ start_log_file() -> {error, eexist} -> ok; MkDirError -> - exit({cant_create_log_dir,{MkDirError,Dir}}) + log_file_error(MkDirError, Dir) end, TestDir = timestamp_filename_get(filename:join(Dir, "run.")), TestDir1 = @@ -1896,20 +1667,26 @@ start_log_file() -> ok -> TestDirX; MkDirError2 -> - exit({cant_create_log_dir,{MkDirError2,TestDirX}}) + log_file_error(MkDirError2, TestDirX) end; MkDirError2 -> - exit({cant_create_log_dir,{MkDirError2,TestDir}}) + log_file_error(MkDirError2, TestDir) end, ok = file:write_file(filename:join(Dir, ?last_file), TestDir1 ++ "\n"), ok = file:write_file(?last_file, TestDir1 ++ "\n"), put(test_server_log_dir_base,TestDir1), MajorName = filename:join(TestDir1, ?suitelog_name), HtmlName = MajorName ++ ?html_ext, + UnexpectedName = filename:join(TestDir1, ?unexpected_io_log), {ok,Major} = file:open(MajorName, [write]), {ok,Html} = file:open(HtmlName, [write]), + {ok,Unexpected} = file:open(UnexpectedName, [write]), + test_server_io:set_fd(major, Major), + test_server_io:set_fd(html, Html), + test_server_io:set_fd(unexpected_io, Unexpected), put(test_server_major_fd,Major), put(test_server_html_fd,Html), + put(test_server_unexpected_io, Unexpected), make_html_link(filename:absname(?last_test ++ ?html_ext), HtmlName, filename:basename(Dir)), @@ -1920,12 +1697,15 @@ start_log_file() -> PrivDir = filename:join(TestDir1, ?priv_dir), ok = file:make_dir(PrivDir), put(test_server_priv_dir,PrivDir++"/"), - print_timestamp(13,"Suite started at "), + print_timestamp(major, "Suite started at "), LogInfo = [{topdir,Dir},{rundir,lists:flatten(TestDir1)}], test_server_sup:framework_call(report, [loginfo,LogInfo]), {ok,TestDir1}. +log_file_error(Error, Dir) -> + exit({cannot_create_log_dir,{Error,lists:flatten(Dir)}}). + make_html_link(LinkName, Target, Explanation) -> %% if possible use a relative reference to Target. TargetL = filename:split(Target), @@ -1959,13 +1739,14 @@ make_html_link(LinkName, Target, Explanation) -> %% Some header info will also be inserted into the log file. start_minor_log_file(Mod, Func) -> + MFA = {Mod,Func,1}, LogDir = get(test_server_log_dir_base), Name0 = lists:flatten(io_lib:format("~s.~s~s", [Mod,Func,?html_ext])), Name = downcase(Name0), AbsName = filename:join(LogDir, Name), case file:read_file_info(AbsName) of {error,_} -> %% normal case, unique name - start_minor_log_file1(Mod, Func, LogDir, AbsName); + start_minor_log_file1(Mod, Func, LogDir, AbsName, MFA); {ok,_} -> %% special case, duplicate names {_,S,Us} = now(), Name1_0 = @@ -1974,14 +1755,15 @@ start_minor_log_file(Mod, Func) -> ?html_ext])), Name1 = downcase(Name1_0), AbsName1 = filename:join(LogDir, Name1), - start_minor_log_file1(Mod, Func, LogDir, AbsName1) + start_minor_log_file1(Mod, Func, LogDir, AbsName1, MFA) end. -start_minor_log_file1(Mod, Func, LogDir, AbsName) -> +start_minor_log_file1(Mod, Func, LogDir, AbsName, MFA) -> {ok,Fd} = file:open(AbsName, [write]), Lev = get(test_server_minor_level)+1000, %% far down in the minor levels put(test_server_minor_fd, Fd), - + test_server_gl:set_minor_fd(group_leader(), Fd, MFA), + TestDescr = io_lib:format("Test ~p:~p result", [Mod,Func]), {Header,Footer} = case test_server_sup:framework_call(get_html_wrapper, @@ -2014,7 +1796,7 @@ start_minor_log_file1(Mod, Func, LogDir, AbsName) -> lists:member(no_src, get(test_server_logopts))} of {true,false} -> print(Lev, "<a href=\"~s#~s\">source code for ~p:~p/1</a>\n", - [SrcListing,Func,Mod,Func]); + [SrcListing,atom_to_list(Func)++"-1",Mod,Func]); _ -> ok end, @@ -2029,6 +1811,7 @@ start_minor_log_file1(Mod, Func, LogDir, AbsName) -> AbsName. stop_minor_log_file() -> + test_server_gl:unset_minor_fd(group_leader()), Fd = get(test_server_minor_fd), Footer = get(test_server_minor_footer), io:fwrite(Fd, "</pre>\n" ++ Footer, []), @@ -2304,9 +2087,7 @@ do_add_end_per_suite_and_skip(LastMod, LastRef, Mod, FwMod) -> %% Runs the specified tests, then displays/logs the summary. run_test_cases(TestSpec, Config, TimetrapData) -> - - maybe_open_job_sock(), - + test_server:init_purify(), case lists:member(no_src, get(test_server_logopts)) of true -> ok; @@ -2316,8 +2097,6 @@ run_test_cases(TestSpec, Config, TimetrapData) -> run_test_cases_loop(TestSpec, [Config], TimetrapData, [], []), - maybe_get_privdir(), - {AllSkippedN,UserSkipN,AutoSkipN,SkipStr} = case get(test_server_skipped) of {0,0} -> {0,0,0,""}; @@ -2336,41 +2115,6 @@ run_test_cases(TestSpec, Config, TimetrapData) -> print(major, "=auto_skipped ~p", [AutoSkipN]), exit(test_suites_done). -%% If the test is run at a remote target, this function sets up a socket -%% communication with the target for handling this particular job. -maybe_open_job_sock() -> - TI = get_target_info(), - case TI#target_info.where of - local -> - %% local target - test_server:init_purify(); - MainSock -> - %% remote target - {ok,LSock} = gen_tcp:listen(0, [binary, - {reuseaddr,true}, - {packet,4}, - {active,false}]), - {ok,Port} = inet:port(LSock), - request(MainSock, {job,Port,get(test_server_name)}), - case gen_tcp:accept(LSock, ?ACCEPT_TIMEOUT) of - {ok,Sock} -> put(test_server_ctrl_job_sock, Sock); - {error,Reason} -> exit({no_contact,Reason}) - end - end. - -%% If the test is run at a remote target, this function waits for a -%% tar packet containing the privdir created by the test case. -maybe_get_privdir() -> - case get(test_server_ctrl_job_sock) of - undefined -> - %% local target - ok; - Sock -> - %% remote target - request(Sock, job_done), - gen_tcp:close(Sock) - end. - %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% run_test_cases_loop(TestCases, Config, TimetrapData, Mode, Status) -> ok @@ -2449,27 +2193,38 @@ maybe_get_privdir() -> %% reason, the Mode argument specifies if a parallel group is currently %% being executed. %% -%% A parallel test case process will always set the dictionary value -%% 'test_server_common_io_handler' to the pid of the main (starting) -%% process. With this value set, the print/3 function will send print -%% messages to the main process instead of writing the data to file -%% (only true for printouts to common log files). +%% The low-level mechanism for buffering IO for the common log files +%% is handled by the test_server_io module. Buffering is turned on by +%% test_server_io:start_transaction/0 and off by calling +%% test_server_io:end_transaction/0. The buffered data for the transaction +%% can printed by calling test_server_io:print_buffered/1. +%% +%% This module is responsible for turning on IO buffering and to later +%% test_server_io:print_buffered/1 to print the data. To help with this, +%% two variables in the process dictionary are used: +%% 'test_server_common_io_handler' and 'test_server_queued_io'. The values +%% are set to as follwing: +%% +%% Value Meaning +%% ----- ------- +%% undefined No parallel test cases running +%% {tc,Pid} Running test cases in a top-level parallel group +%% {Ref,Pid} Running sequential test case inside a parallel group +%% +%% FIXME: The Pid is no longer used. %% %% If a conf group nested under a parallel group in the test %% specification should be started, the 'test_server_common_io_handler' -%% value gets set also on the main process. This causes all printouts -%% to common files - both from parallel test cases and from cases -%% executed by the main process - to all end up as messages in the -%% inbox of the main process. +%% value gets set also on the main process. %% %% During execution of a parallel group (or of a group nested under a %% parallel group), *any* new test case being started gets registered %% in a list saved in the dictionary with 'test_server_queued_io' as key. %% When the top level parallel group is finished (only then can we be %% sure all parallel test cases have finished and "reported in"), the -%% list of test cases is traversed in order and printout messages from -%% each process - including the main process - are handled in turn. See -%% handle_test_case_io_and_status/0 for details. +%% list of test cases is traversed in order and test_server_io:print_buffered/1 +%% can be called for each test case. See handle_test_case_io_and_status/0 +%% for details. %% %% To be able to handle nested conf groups with different properties, %% the Mode argument specifies a list of {Ref,Properties} tuples. @@ -2612,16 +2367,15 @@ run_test_cases_loop([{auto_skip_case,{Type,Ref,Case,Comment},SkipMode}|Cases], run_test_cases_loop([{auto_skip_case,{Case,Comment},SkipMode}|Cases], Config, TimetrapData, Mode, Status) -> - {Mod,Func} = skip_case(auto, undefined, get(test_server_case_num)+1, Case, Comment, - (undefined /= get(test_server_common_io_handler)), SkipMode), + {Mod,Func} = skip_case(auto, undefined, get(test_server_case_num)+1, + Case, Comment, is_io_buffered(), SkipMode), test_server_sup:framework_call(report, [tc_auto_skip,{?pl2a(Mod),Func,Comment}]), run_test_cases_loop(Cases, Config, TimetrapData, Mode, update_status(skipped, Mod, Func, Status)); run_test_cases_loop([{skip_case,{conf,Ref,Case,Comment}}|Cases0], Config, TimetrapData, Mode, Status) -> - {Mod,Func} = skip_case(user, Ref, 0, Case, Comment, - (undefined /= get(test_server_common_io_handler))), + {Mod,Func} = skip_case(user, Ref, 0, Case, Comment, is_io_buffered()), {Cases,Config1} = case curr_ref(Mode) of Ref -> @@ -2637,8 +2391,8 @@ run_test_cases_loop([{skip_case,{conf,Ref,Case,Comment}}|Cases0], run_test_cases_loop([{skip_case,{Case,Comment}}|Cases], Config, TimetrapData, Mode, Status) -> - {Mod,Func} = skip_case(user, undefined, get(test_server_case_num)+1, Case, Comment, - (undefined /= get(test_server_common_io_handler))), + {Mod,Func} = skip_case(user, undefined, get(test_server_case_num)+1, + Case, Comment, is_io_buffered()), test_server_sup:framework_call(report, [tc_user_skip,{?pl2a(Mod),Func,Comment}]), run_test_cases_loop(Cases, Config, TimetrapData, Mode, update_status(skipped, Mod, Func, Status)); @@ -2875,7 +2629,7 @@ run_test_cases_loop([{conf,Ref,Props,{Mod,Func}}|_Cases]=Cs0, end, CurrMode = curr_mode(Ref, Mode0, Mode), - ConfCaseResult = run_test_case(Ref, 0, Mod, Func, [ActualCfg], skip_init, target, + ConfCaseResult = run_test_case(Ref, 0, Mod, Func, [ActualCfg], skip_init, TimetrapData, CurrMode), case ConfCaseResult of @@ -2909,6 +2663,7 @@ run_test_cases_loop([{conf,Ref,Props,{Mod,Func}}|_Cases]=Cs0, exit(framework_error); {_,Fail,_} when element(1,Fail) == 'EXIT'; element(1,Fail) == timetrap_timeout; + element(1,Fail) == user_timetrap_error; element(1,Fail) == failed -> {Cases2,Config1,Status3} = if StartConf -> @@ -2928,14 +2683,6 @@ run_test_cases_loop([{conf,Ref,Props,{Mod,Func}}|_Cases]=Cs0, set_io_buffering(IOHandler), stop_minor_log_file(), run_test_cases_loop(Cases2, Config1, TimetrapData, Mode, Status3); - {died,Why,_} when Func == init_per_suite -> - print(minor, "~n*** Unexpected exit during init_per_suite.~n", []), - Reason = {failed,{Mod,init_per_suite,Why}}, - Cases2 = skip_cases_upto(Ref, Cases, Reason, conf, CurrMode), - set_io_buffering(IOHandler), - stop_minor_log_file(), - run_test_cases_loop(Cases2, Config, TimetrapData, Mode, - delete_status(Ref, Status2)); {_,{Skip,Reason},_} when StartConf and ((Skip==skip) or (Skip==skipped)) -> ReportAbortRepeat(skipped), print(minor, "~n*** ~p skipped.~n" @@ -3006,7 +2753,7 @@ run_test_cases_loop([{conf,Ref,Props,{Mod,Func}}|_Cases]=Cs0, end; run_test_cases_loop([{make,Ref,{Mod,Func,Args}}|Cases0], Config, TimetrapData, Mode, Status) -> - case run_test_case(Ref, 0, Mod, Func, Args, skip_init, host, TimetrapData) of + case run_test_case(Ref, 0, Mod, Func, Args, skip_init, TimetrapData) of {_,Why={'EXIT',_},_} -> print(minor, "~n*** ~p failed.~n" " Skipping all cases.", [Func]), @@ -3037,23 +2784,21 @@ run_test_cases_loop([{Mod,Case}|Cases], Config, TimetrapData, Mode, Status) -> run_test_cases_loop([{Mod,Func,Args}|Cases], Config, TimetrapData, Mode, Status) -> Num = put(test_server_case_num, get(test_server_case_num)+1), + %% check the current execution mode and save info about the case if %% detected that printouts to common log files is handled later - case check_prop(parallel, Mode) of + + case check_prop(parallel, Mode) =:= false andalso is_io_buffered() of + true -> + %% sequential test case nested in a parallel group; + %% io is buffered, so we must queue this test case + queue_test_case_io(undefined, self(), Num+1, Mod, Func); false -> - case get(test_server_common_io_handler) of - undefined -> - %% io printouts are written to straight to file - ok; - _ -> - %% io messages are buffered, put test case in queue - queue_test_case_io(undefined, self(), Num+1, Mod, Func) - end; - _ -> ok end, + case run_test_case(undefined, Num+1, Mod, Func, Args, - run_init, target, TimetrapData, Mode) of + run_init, TimetrapData, Mode) of %% callback to framework module failed, exit immediately {_,{framework_error,{FwMod,FwFunc},Reason},_} -> print(minor, "~n*** ~p failed in ~p. Reason: ~p~n", [FwMod,FwFunc,Reason]), @@ -3100,8 +2845,8 @@ run_test_cases_loop([{Mod,Func,Args}|Cases], Config, TimetrapData, Mode, Status) %% the test case is being executed in parallel with the main process (and %% other test cases) and Pid is the dedicated process executing the case Pid -> - %% io from Pid will be buffered in the main process inbox and handled - %% later, so we have to save info about the case + %% io from Pid will be buffered by the test_server_io process and + %% handled later, so we have to save info about the case queue_test_case_io(undefined, Pid, Num+1, Mod, Func), run_test_cases_loop(Cases, Config, TimetrapData, Mode, Status) end; @@ -3208,11 +2953,17 @@ get_data_dir(Mod, Suite) -> non_existing -> print(12, "The module ~p is not loaded", [Mod]), []; + cover_compiled -> + MainCoverNode = cover:get_main_node(), + {file,File} = rpc:call(MainCoverNode,cover,is_compiled,[UseMod]), + do_get_data_dir(UseMod,File); FullPath -> - filename:dirname(FullPath) ++ "/" ++ cast_to_list(UseMod) ++ - ?data_dir_suffix + do_get_data_dir(UseMod,FullPath) end. +do_get_data_dir(Mod,File) -> + filename:dirname(File) ++ "/" ++ cast_to_list(Mod) ++ ?data_dir_suffix. + print_conf_time(0) -> ok; print_conf_time(ConfTime) -> @@ -3356,7 +3107,9 @@ skip_case(Type, Ref, CaseNum, Case, Comment, SendSync, Mode) -> if SendSync -> queue_test_case_io(Ref, self(), CaseNum, Mod, Func), self() ! {started,Ref,self(),CaseNum,Mod,Func}, + test_server_io:start_transaction(), skip_case1(Type, CaseNum, Mod, Func, Comment, Mode), + test_server_io:end_transaction(), self() ! {finished,Ref,self(),CaseNum,Mod,Func,skipped,{0,skipped,[]}}; not SendSync -> skip_case1(Type, CaseNum, Mod, Func, Comment, Mode) @@ -3497,13 +3250,20 @@ modify_cases_upto1(Ref, CopyOp, [C|T], Orig, Alt) -> %% %% Save info about current process (always the main process) buffering %% io printout messages from parallel test case processes (*and* possibly -%% also the main process). If the value is the default 'undefined', -%% io is not buffered but printed directly to file (see print/3). +%% also the main process). set_io_buffering(IOHandler) -> put(test_server_common_io_handler, IOHandler). %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% +%% is_io_buffered() -> true|false +%% +%% Test whether is being buffered. + +is_io_buffered() -> + get(test_server_common_io_handler) =/= undefined. + +%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% queue_test_case_io(Pid, Num, Mod, Func) -> ok %% %% Save info about test case that gets its io buffered. This can @@ -3550,7 +3310,7 @@ wait_and_resend(Ref, [{_,CurrPid,CaseNum,Mod,Func}|Ps] = Cases, Ok,Skip,Fail) -> receive {finished,_Ref,CurrPid,CaseNum,Mod,Func,Result,_RetVal} = Msg -> %% resend message to main process so that it can be used - %% to handle buffered io messages later + %% to test_server_io:print_buffered/1 later self() ! Msg, MF = {Mod,Func}, {Ok1,Skip1,Fail1} = @@ -3581,16 +3341,18 @@ rm_cases_upto(Ref, [_|Ps]) -> %% %% Each parallel test case process prints to its own minor log file during %% execution. The common log files (major, html etc) must however be -%% written to sequentially. The test case processes send print requests -%% to the main (starting) process (the same process executing -%% run_test_cases_loop/4), which handles these requests in the same -%% order that the test case processes were started. -%% -%% An io session is always started with a {started,Ref,Pid,Num,Mod,Func} -%% message and terminated with {finished,Ref,Pid,Num,Mod,Func,Result,RetVal}. -%% The result shipped with the finished message from a parallel process -%% is used to update status data of the current test run. An 'EXIT' -%% message from each parallel test case process (after finishing and +%% written to sequentially. This is handled by calling +%% test_server_io:start_transaction/0 to tell the test_server_io process +%% to buffer all print requests. +%% +%% An io session is always started with a +%% {started,Ref,Pid,Num,Mod,Func} message (and +%% test_server_io:start_transaction/0 will be called) and terminated +%% with {finished,Ref,Pid,Num,Mod,Func,Result,RetVal} (and +%% test_server_io:end_transaction/0 will be called). The result +%% shipped with the finished message from a parallel process is used +%% to update status data of the current test run. An 'EXIT' message +%% from each parallel test case process (after finishing and %% terminating) is also received and handled here. %% %% During execution of a parallel group, any cases (conf or normal) @@ -3599,13 +3361,13 @@ rm_cases_upto(Ref, [_|Ps]) -> %% correct sequence. This function handles also the print messages %% generated by nested group cases that have been executed sequentially %% by the main process (note that these cases do not generate 'EXIT' -%% messages, only 'start', 'print' and 'finished' messages). +%% messages, only 'start' and 'finished' messages). %% %% See the header comment for run_test_cases_loop/4 for more %% info about IO handling. %% %% Note: It is important that the type of messages handled here -%% do not get consumated by test_server:run_test_case_msgloop/5 +%% do not get consumed by test_server:run_test_case_msgloop/5 %% during the test case execution (e.g. in the catch clause of %% the receive)! @@ -3632,7 +3394,7 @@ handle_test_case_io_and_status() -> %% Handle cases (without Ref) that belong to the top parallel group (i.e. when Refs = []) handle_io_and_exit_loop([], [{undefined,CurrPid,CaseNum,Mod,Func}|Ps] = Cases, Ok,Skip,Fail) -> - %% retreive the start message for the current io session (= testcase) + %% retrieve the start message for the current io session (= testcase) receive {started,_,CurrPid,CaseNum,Mod,Func} -> {Ok1,Skip1,Fail1} = @@ -3672,11 +3434,18 @@ handle_io_and_exit_loop(_, [], Ok,Skip,Fail) -> handle_io_and_exits(Main, CurrPid, CaseNum, Mod, Func, Cases) -> receive + {abort_current_testcase=Tag,_Reason,From} -> + %% If a parallel group is executing, there is no unique + %% current test case, so we must generate an error. + From ! {self(),Tag,{error,parallel_group}}, + handle_io_and_exits(Main, CurrPid, CaseNum, Mod, Func, Cases); %% end of io session from test case executed by main process {finished,_,Main,CaseNum,Mod,Func,Result,_RetVal} -> + test_server_io:print_buffered(CurrPid), {Result,{Mod,Func}}; %% end of io session from test case executed by parallel process {finished,_,CurrPid,CaseNum,Mod,Func,Result,RetVal} -> + test_server_io:print_buffered(CurrPid), case Result of ok -> put(test_server_ok, get(test_server_ok)+1); @@ -3689,13 +3458,9 @@ handle_io_and_exits(Main, CurrPid, CaseNum, Mod, Func, Cases) -> end, {Result,{Mod,Func}}; - %% print to common log file - {print,CurrPid,Detail,Msg} -> - output({Detail,Msg}, internal), - handle_io_and_exits(Main, CurrPid, CaseNum, Mod, Func, Cases); - %% unexpected termination of test case process {'EXIT',TCPid,Reason} when Reason /= normal -> + test_server_io:print_buffered(CurrPid), {value,{_,_,Num,M,F}} = lists:keysearch(TCPid, 2, Cases), print(1, "Error! Process for test case #~p (~p:~p) died! Reason: ~p", [Num, M, F, Reason]), @@ -3727,59 +3492,52 @@ handle_io_and_exits(Main, CurrPid, CaseNum, Mod, Func, Cases) -> %% RetVal is the result of executing the test case. It contains info %% about the execution time and the return value of the test case function. -run_test_case(Ref, Num, Mod, Func, Args, RunInit, Where, TimetrapData) -> +run_test_case(Ref, Num, Mod, Func, Args, RunInit, TimetrapData) -> file:set_cwd(filename:dirname(get(test_server_dir))), - run_test_case1(Ref, Num, Mod, Func, Args, RunInit, Where, - TimetrapData, [], [], self()). + run_test_case1(Ref, Num, Mod, Func, Args, RunInit, + TimetrapData, [], self()). -run_test_case(Ref, Num, Mod, Func, Args, skip_init, Where, TimetrapData, Mode) -> +run_test_case(Ref, Num, Mod, Func, Args, skip_init, TimetrapData, Mode) -> %% a conf case is always executed by the main process - run_test_case1(Ref, Num, Mod, Func, Args, skip_init, Where, - TimetrapData, [], Mode, self()); + run_test_case1(Ref, Num, Mod, Func, Args, skip_init, + TimetrapData, Mode, self()); -run_test_case(Ref, Num, Mod, Func, Args, RunInit, Where, TimetrapData, Mode) -> +run_test_case(Ref, Num, Mod, Func, Args, RunInit, TimetrapData, Mode) -> file:set_cwd(filename:dirname(get(test_server_dir))), + Main = self(), case check_prop(parallel, Mode) of false -> %% this is a sequential test case - run_test_case1(Ref, Num, Mod, Func, Args, RunInit, Where, - TimetrapData, [], Mode, self()); + run_test_case1(Ref, Num, Mod, Func, Args, RunInit, + TimetrapData, Mode, Main); _Ref -> %% this a parallel test case, spawn the new process - Main = self(), - {dictionary,State} = process_info(self(), dictionary), - spawn_link(fun() -> - run_test_case1(Ref, Num, Mod, Func, Args, RunInit, Where, - TimetrapData, State, Mode, Main) - end) + Dictionary = get(), + {dictionary,Dictionary} = process_info(self(), dictionary), + spawn_link( + fun() -> + process_flag(trap_exit, true), + [put(Key, Val) || {Key,Val} <- Dictionary], + set_io_buffering({tc,Main}), + run_test_case1(Ref, Num, Mod, Func, Args, RunInit, + TimetrapData, Mode, Main) + end) end. -run_test_case1(Ref, Num, Mod, Func, Args, RunInit, Where, - TimetrapData, State, Mode, Main) -> - %% if this runs on a parallel test case process, - %% copy the dictionary from the main process - do_if_parallel(Main, fun() -> process_flag(trap_exit, true) end, ok), - CopyDict = fun() -> lists:foreach(fun({Key,Val}) -> - put(Key, Val) - end, State) - end, - do_if_parallel(Main, CopyDict, ok), - do_if_parallel(Main, fun() -> - put(test_server_common_io_handler, {tc,Main}) - end, ok), +run_test_case1(Ref, Num, Mod, Func, Args, RunInit, + TimetrapData, Mode, Main) -> + group_leader(test_server_io:get_gl(Main == self()), self()), + %% if io is being buffered, send start io session message %% (no matter if case runs on parallel or main process) - case get(test_server_common_io_handler) of - undefined -> ok; - _ -> Main ! {started,Ref,self(),Num,Mod,Func} + case is_io_buffered() of + false -> ok; + true -> + test_server_io:start_transaction(), + Main ! {started,Ref,self(),Num,Mod,Func} end, TSDir = get(test_server_dir), - case Where of - target -> - maybe_send_beam_and_datadir(Mod); - host -> - ok - end, + print(major, "=case ~p:~p", [Mod, Func]), MinorName = start_minor_log_file(Mod, Func), print(minor, "<a name=\"top\"></a>", [], internal_raw), @@ -3831,13 +3589,12 @@ run_test_case1(Ref, Num, Mod, Func, Args, RunInit, Where, [num2str(Num),fw_name(Mod),GroupName,MinorBase,Func, MinorBase,MinorBase]), - do_if_parallel(Main, ok, fun erlang:yield/0), + do_unless_parallel(Main, fun erlang:yield/0), - RejectIoReqs = get(test_server_reject_io_reqs), %% run the test case {Result,DetectedFail,ProcsBefore,ProcsAfter} = run_test_case_apply(Num, Mod, Func, [UpdatedArgs], get_name(Mode), - RunInit, Where, TimetrapData, RejectIoReqs), + RunInit, TimetrapData), {Time,RetVal,Loc,Opts,Comment} = case Result of Normal={_Time,_RetVal,_Loc,_Opts,_Comment} -> Normal; @@ -3849,7 +3606,7 @@ run_test_case1(Ref, Num, Mod, Func, Args, RunInit, Where, print_timestamp(minor, "Ended at "), print(major, "=ended ~s", [lists:flatten(timestamp_get(""))]), - do_if_parallel(Main, ok, fun() -> file:set_cwd(filename:dirname(TSDir)) end), + do_unless_parallel(Main, fun() -> file:set_cwd(filename:dirname(TSDir)) end), %% call the appropriate progress function clause to print the results to log Status = @@ -3954,14 +3711,17 @@ run_test_case1(Ref, Num, Mod, Func, Args, RunInit, Where, true -> ok end, - check_new_crash_dumps(Where), + test_server_sup:check_new_crash_dumps(), %% if io is being buffered, send finished message %% (no matter if case runs on parallel or main process) - case get(test_server_common_io_handler) of - undefined -> ok; - _ -> Main ! {finished,Ref,self(),Num,Mod,Func, - ?mod_result(Status),{Time,RetVal,Opts}} + case is_io_buffered() of + false -> + ok; + true -> + test_server_io:end_transaction(), + Main ! {finished,Ref,self(),Num,Mod,Func, + ?mod_result(Status),{Time,RetVal,Opts}} end, {Time,RetVal,Opts}. @@ -3969,126 +3729,16 @@ run_test_case1(Ref, Num, Mod, Func, Args, RunInit, Where, %%-------------------------------------------------------------------- %% various help functions -%% Call If() if we're on parallel process, or -%% call Else() if we're on main process -do_if_parallel(Pid, If, Else) -> +%% Call Action if we are running on the main process (not parallel). +do_unless_parallel(Main, Action) when is_function(Action, 0) -> case self() of - Pid -> - if is_function(Else) -> Else(); - true -> Else - end; - _ -> - if is_function(If) -> If(); - true -> If - end + Main -> Action(); + _ -> ok end. num2str(0) -> ""; num2str(N) -> integer_to_list(N). -%% If remote target, this function sends the test suite (if not already sent) -%% and the content of datadir til target. -maybe_send_beam_and_datadir(Mod) -> - case get(test_server_ctrl_job_sock) of - undefined -> - %% local target - ok; - JobSock -> - %% remote target - case get(test_server_downloaded_suites) of - undefined -> - send_beam_and_datadir(Mod, JobSock), - put(test_server_downloaded_suites, [Mod]); - Suites -> - case lists:member(Mod, Suites) of - false -> - send_beam_and_datadir(Mod, JobSock), - put(test_server_downloaded_suites, [Mod|Suites]); - true -> - ok - end - end - end. - -send_beam_and_datadir(Mod, JobSock) -> - case code:which(Mod) of - non_existing -> - io:format("** WARNING: Suite ~w could not be found on host\n", - [Mod]); - BeamFile -> - send_beam(JobSock, Mod, BeamFile) - end, - DataDir = get_data_dir(Mod), - case file:read_file_info(DataDir) of - {ok,_I} -> - {ok,All} = file:list_dir(DataDir), - AddTarFiles = - case controller_call(get_target_info) of - #target_info{os_family=ose} -> - ObjExt = code:objfile_extension(), - Wc = filename:join(DataDir, "*" ++ ObjExt), - ModsInDatadir = filelib:wildcard(Wc), - SendBeamFun = fun(X) -> send_beam(JobSock, X) end, - lists:foreach(SendBeamFun, ModsInDatadir), - %% No need to send C code or makefiles since - %% no compilation can be done on target anyway. - %% Compiled C code must exist on target. - %% Beam files are already sent as binaries. - %% Erlang source are sent in case the test case - %% is to compile it. - Filter = fun("Makefile") -> false; - ("Makefile.src") -> false; - (Y) -> - case filename:extension(Y) of - ".c" -> false; - ObjExt -> false; - _ -> true - end - end, - lists:filter(Filter, All); - _ -> - All - end, - Tarfile = "data_dir.tar.gz", - {ok,Tar} = erl_tar:open(Tarfile, [write,compressed]), - ShortDataDir = filename:basename(DataDir), - AddTarFun = - fun(File) -> - Long = filename:join(DataDir, File), - Short = filename:join(ShortDataDir, File), - ok = erl_tar:add(Tar, Long, Short, []) - end, - lists:foreach(AddTarFun, AddTarFiles), - ok = erl_tar:close(Tar), - {ok,TarBin} = file:read_file(Tarfile), - file:delete(Tarfile), - request(JobSock, {{datadir,Tarfile}, TarBin}); - {error,_R} -> - ok - end. - -send_beam(JobSock, BeamFile) -> - Mod=filename:rootname(filename:basename(BeamFile), code:objfile_extension()), - send_beam(JobSock, list_to_atom(Mod), BeamFile). -send_beam(JobSock, Mod, BeamFile) -> - {ok,BeamBin} = file:read_file(BeamFile), - request(JobSock, {{beam,Mod,BeamFile}, BeamBin}). - -check_new_crash_dumps(Where) -> - case Where of - target -> - case get(test_server_ctrl_job_sock) of - undefined -> - ok; - Socket -> - read_job_sock_loop(Socket) - end; - _ -> - ok - end, - test_server_sup:check_new_crash_dumps(). - - %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% progress(Result, CaseNum, Mod, Func, Location, Reason, Time, %% Comment, TimeFormat) -> Result @@ -4456,11 +4106,10 @@ do_format_exception(Reason={Error,Stack}) -> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% run_test_case_apply(CaseNum, Mod, Func, Args, Name, RunInit, -%% Where, TimetrapData, RejectIoReqs) -> +%% TimetrapData) -> %% {{Time,RetVal,Loc,Opts,Comment},DetectedFail,ProcessesBefore,ProcessesAfter} | %% {{died,Reason,unknown,Comment},DetectedFail,ProcessesBefore,ProcessesAfter} %% Name = atom() -%% Where = target | host %% Time = float() (seconds) %% RetVal = term() %% Loc = term() @@ -4475,23 +4124,10 @@ do_format_exception(Reason={Error,Stack}) -> %% sent over socket to target, and test_server runs the case and sends the %% result back over the socket. Else test_server runs the case directly on host. -run_test_case_apply(CaseNum, Mod, Func, Args, Name, RunInit, host, - TimetrapData, RejectIoReqs) -> +run_test_case_apply(CaseNum, Mod, Func, Args, Name, RunInit, + TimetrapData) -> test_server:run_test_case_apply({CaseNum,Mod,Func,Args,Name,RunInit, - TimetrapData,RejectIoReqs}); -run_test_case_apply(CaseNum, Mod, Func, Args, Name, RunInit, target, - TimetrapData, RejectIoReqs) -> - case get(test_server_ctrl_job_sock) of - undefined -> - %% local target - test_server:run_test_case_apply({CaseNum,Mod,Func,Args,Name,RunInit, - TimetrapData,RejectIoReqs}); - JobSock -> - %% remote target - request(JobSock, {test_case,{CaseNum,Mod,Func,Args,Name,RunInit, - TimetrapData,RejectIoReqs}}), - read_job_sock_loop(JobSock) - end. + TimetrapData}). %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% print(Detail, Format, Args) -> ok @@ -4501,16 +4137,6 @@ run_test_case_apply(CaseNum, Mod, Func, Args, Name, RunInit, target, %% %% Just like io:format, except that depending on the Detail value, the output %% is directed to console, major and/or minor log files. -%% -%% To handle printouts to common (not minor) log files from parallel test -%% case processes, the test_server_common_io_handler value is checked. If -%% set, the data is sent to the main controlling process. Note that test -%% cases that belong to a conf group nested under a parallel group will also -%% get its io data sent to main rather than immediately printed out, even -%% if the test cases are executed by the same, main, process (ie the main -%% process sends messages to itself then). -%% -%% Buffered io is handled by the handle_test_case_io_and_status/0 function. print(Detail, Format) -> print(Detail, Format, []). @@ -4523,19 +4149,7 @@ print(Detail, Format, Args, Printer) -> print_or_buffer(Detail, Msg, Printer). print_or_buffer(Detail, Msg, Printer) -> - case get(test_server_minor_level) of - _ when Detail == minor -> - output({Detail,Msg}, Printer); - MinLevel when is_number(Detail), Detail >= MinLevel -> - output({Detail,Msg}, Printer); - _ -> % Detail < Minor | major | html - case get(test_server_common_io_handler) of - undefined -> - output({Detail,Msg}, Printer); - {_,MainPid} -> - MainPid ! {print,self(),Detail,Msg} - end - end. + test_server_gl:print(group_leader(), Detail, Msg, Printer). %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% print_timestamp(Detail, Leader) -> ok @@ -4599,112 +4213,6 @@ format(Detail, Format, Args) -> print_or_buffer(Detail, Str, self()). %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% output({Level,Message}, Sender) -> ok -%% Level = integer() | minor | major | html -%% Message = string() | [integer()] -%% Sender = string() | internal -%% -%% Outputs the message on the channels indicated by Level. If Level is an -%% atom, only the corresponding channel receives the output. When Level is -%% an integer console, major and/or minor log file will receive output -%% depending on the user set thresholds (see get_levels/0, set_levels/3) -%% -%% When printing on the console, the message is prefixed with the test -%% suite's name. In case a name is not set (yet), Sender is used. -%% -%% When not outputting to the console, and the Sender is 'internal', -%% the message is prefixed with "=== ", so that it will be apparent that -%% the message comes from the test server and not the test suite itself. - -output({Level,Msg}, Sender) when is_integer(Level) -> - SumLev = get(test_server_summary_level), - if Level =< SumLev -> - output_to_fd(stdout, Msg, Sender); - true -> - ok - end, - MajLev = get(test_server_major_level), - if Level =< MajLev -> - output_to_fd(get(test_server_major_fd), Msg, Sender); - true -> - ok - end, - MinLev = get(test_server_minor_level), - if Level >= MinLev -> - output_to_fd(get(test_server_minor_fd), Msg, Sender); - true -> - ok - end; -output({minor,Bytes}, Sender) when is_list(Bytes) -> - output_to_fd(get(test_server_minor_fd), Bytes, Sender); -output({major,Bytes}, Sender) when is_list(Bytes) -> - output_to_fd(get(test_server_major_fd), Bytes, Sender); -output({minor,Bytes}, Sender) when is_binary(Bytes) -> - output_to_fd(get(test_server_minor_fd),binary_to_list(Bytes), Sender); -output({major,Bytes}, Sender) when is_binary(Bytes) -> - output_to_fd(get(test_server_major_fd),binary_to_list(Bytes), Sender); -output({html,Msg}, _Sender) -> - case get(test_server_html_fd) of - undefined -> - ok; - Fd -> - io:put_chars(Fd,Msg), - case file:position(Fd, {cur, 0}) of - {ok, Pos} -> - %% We are writing to a seekable file. Finalise so - %% we get complete valid (and viewable) HTML code. - %% Then rewind to overwrite the finalising code. - io:put_chars(Fd, "\n</table>\n"), - case get(test_server_html_footer) of - undefined -> - io:put_chars(Fd, "</body>\n</html>\n"); - Footer -> - io:put_chars(Fd, Footer) - end, - file:position(Fd, Pos); - {error, epipe} -> - %% The file is not seekable. We cannot erase what - %% we've already written --- so the reader will - %% have to wait until we're done. - ok - end - end; -output({minor,Data}, Sender) -> - output_to_fd(get(test_server_minor_fd), - lists:flatten(io_lib:format( - "Unexpected output: ~p~n", [Data])),Sender); -output({major,Data}, Sender) -> - output_to_fd(get(test_server_major_fd), - lists:flatten(io_lib:format( - "Unexpected output: ~p~n", [Data])),Sender). - -output_to_fd(stdout, Msg, Sender) -> - Name = - case get(test_server_name) of - undefined -> Sender; - Other -> Other - end, - io:format("Testing ~s: ~s\n", [Name, lists:flatten(Msg)]); -output_to_fd(undefined, _Msg, _Sender) -> - ok; -output_to_fd(Fd, [$=|Msg], internal) -> - io:put_chars(Fd, [$=]), - io:put_chars(Fd, Msg), - io:put_chars(Fd, "\n"); - -output_to_fd(Fd, Msg, internal) -> - io:put_chars(Fd, [$=,$=,$=,$ ]), - io:put_chars(Fd, Msg), - io:put_chars(Fd, "\n"); - -output_to_fd(Fd, Msg, _Sender) -> - io:put_chars(Fd, Msg), - case get(test_server_log_nl) of - false -> ok; - _ -> io:put_chars(Fd, "\n") - end. - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% xhtml(BasicHtml, XHtml) -> BasicHtml | XHtml %% xhtml(HTML, XHTML) -> @@ -5216,7 +4724,7 @@ get_target_info() -> %% Called by test_server. See test_server:start_node/3 for details start_node(Name, Type, Options) -> - T = 10 * ?ACCEPT_TIMEOUT, % give some extra time + T = 10 * ?ACCEPT_TIMEOUT * test_server:timetrap_scale_factor(), format(minor, "Attempt to start ~w node ~p with options ~p", [Type, Name, Options]), case controller_call({start_node,Name,Type,Options}, T) of @@ -5261,7 +4769,8 @@ start_node(Name, Type, Options) -> %% when the new node has contacted test_server_ctrl again wait_for_node(Slave) -> - case catch controller_call({wait_for_node,Slave},10000) of + T = 10000 * test_server:timetrap_scale_factor(), + case catch controller_call({wait_for_node,Slave},T) of {'EXIT',{timeout,_}} -> {error,timeout}; ok -> ok end. @@ -5285,60 +4794,6 @@ stop_node(Slave) -> controller_call({stop_node,Slave}). -%%-------------------------------------------------------------------- -%% Functions handling target communication over socket - -%% Generic send function for communication with target -request(Sock,Request) -> - gen_tcp:send(Sock,<<1,(term_to_binary(Request))/binary>>). - -%% Receive and decode request on job specific socket -%% Used when test is running on a remote target -read_job_sock_loop(Sock) -> - case gen_tcp:recv(Sock,0) of - {error,Reason} -> - gen_tcp:close(Sock), - exit({controller,connection_lost,Reason}); - {ok,<<1,Request/binary>>} -> - case decode(binary_to_term(Request)) of - ok -> - read_job_sock_loop(Sock); - {stop,Result} -> - Result - end - end. - -decode({apply,{M,F,A}}) -> - apply(M,F,A), - ok; -decode({sync_apply,{M,F,A}}) -> - R = apply(M,F,A), - request(get(test_server_ctrl_job_sock),{sync_result,R}), - ok; -decode({sync_result,Result}) -> - {stop,Result}; -decode({test_case_result,Result}) -> - {stop,Result}; -decode({privdir,empty_priv_dir}) -> - {stop,ok}; -decode({{privdir,PrivDirTar},TarBin}) -> - Root = get(test_server_log_dir_base), - unpack_tar(Root,PrivDirTar,TarBin), - {stop,ok}; -decode({crash_dumps,no_crash_dumps}) -> - {stop,ok}; -decode({{crash_dumps,CrashDumpTar},TarBin}) -> - Dir = test_server_sup:crash_dump_dir(), - unpack_tar(Dir,CrashDumpTar,TarBin), - {stop,ok}. - -unpack_tar(Dir,TarFileName0,TarBin) -> - TarFileName = filename:join(Dir,TarFileName0), - ok = file:write_file(TarFileName,TarBin), - ok = erl_tar:extract(TarFileName,[compressed,{cwd,Dir}]), - ok = file:delete(TarFileName). - - %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% DEBUGGER INTERFACE %% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% @@ -5483,16 +4938,7 @@ cover_compile({App,CoverFile}) -> cover_compile1({App,Exclude,Include,Cross}). cover_compile1(What) -> - case get(test_server_ctrl_job_sock) of - undefined -> - %% local target - test_server:cover_compile(What); - JobSock -> - %% remote target - request(JobSock, {sync_apply,{test_server,cover_compile,[What]}}), - read_job_sock_loop(JobSock) - end. - + test_server:cover_compile(What). %% Read the coverfile for an application and return a list of modules %% that are members of the application but shall not be compiled @@ -5544,7 +4990,7 @@ check_cover_file([], Exclude, Include) -> %% %% This per application analysis writes the file cover.html in the %% application's run.<timestamp> directory. -cover_analyse({App,CoverInfo}, Analyse, AnalyseMods, TestDir) -> +cover_analyse({App,CoverInfo}, Analyse, AnalyseMods, Stop, TestDir) -> write_default_cross_coverlog(TestDir), {ok,CoverLog} = file:open(filename:join(TestDir, ?coverlog_name), [write]), @@ -5575,7 +5021,7 @@ cover_analyse({App,CoverInfo}, Analyse, AnalyseMods, TestDir) -> io:fwrite(CoverLog, "<p>Excluded module(s): <code>~p</code>\n", [Excluded]), - Coverage = cover_analyse(Analyse, AnalyseMods), + Coverage = cover_analyse(Analyse, AnalyseMods, Stop), case lists:filter(fun({_M,{_,_,_}}) -> false; (_) -> true @@ -5592,32 +5038,27 @@ cover_analyse({App,CoverInfo}, Analyse, AnalyseMods, TestDir) -> file:write_file(filename:join(TestDir, ?cover_total), term_to_binary(TotPercent)). -cover_analyse(Analyse, AnalyseMods) -> +cover_analyse(Analyse, AnalyseMods, Stop) -> TestDir = get(test_server_log_dir_base), - case get(test_server_ctrl_job_sock) of - undefined -> - %% local target - test_server:cover_analyse({Analyse,TestDir}, AnalyseMods); - JobSock -> - %% remote target - request(JobSock, {sync_apply,{test_server, - cover_analyse, - [Analyse,AnalyseMods]}}), - read_job_sock_loop(JobSock) - end. + test_server:cover_analyse({Analyse,TestDir}, AnalyseMods, Stop). %% Cover analysis, cross application %% This can be executed on any node after all tests are finished. -%% The node's current directory must be the same as when the tests -%% were run. -cross_cover_analyse(Analyse) -> - cross_cover_analyse(Analyse, undefined). - -cross_cover_analyse(Analyse, CrossModules) -> - CoverdataFiles = get_coverdata_files(), +%% Apps = [{App,Dir}] +%% App = atom(), application name +%% Dir = string(), the log directory for App, normally where +%% run.<timestamp> is found. +%% Modules = [atom()], modules that have been cover compiled during tests +%% of other apps than the one they belong to. +cross_cover_analyse(Analyse, Apps) -> + cross_cover_analyse(Analyse, Apps, get_cross_modules()). +cross_cover_analyse(Analyse, Apps, Modules) -> + Apps1 = get_latest_run_dirs(Apps), + Apps2 = add_cross_modules(Modules,Apps1), + CoverdataFiles = get_coverdata_files(Apps2), lists:foreach(fun(CDF) -> cover:import(CDF) end, CoverdataFiles), - io:fwrite("Cover analysing... ", []), + io:fwrite("Cover analysing...\n", []), DetailsFun = case Analyse of details -> @@ -5631,25 +5072,15 @@ cross_cover_analyse(Analyse, CrossModules) -> _ -> fun(_,_) -> undefined end end, - SortedModules = - case CrossModules of - undefined -> - sort_modules([Mod || Mod <- get_all_cross_modules(), - lists:member(Mod, cover:imported_modules())], []); - _ -> - sort_modules(CrossModules, []) - end, - Coverage = analyse_apps(SortedModules, DetailsFun, []), + Coverage = analyse_apps(Apps2, DetailsFun, []), cover:stop(), - write_cross_cover_logs(Coverage). + write_cross_cover_logs(Coverage,Apps2). -%% For each application from which there are modules listed in the -%% cross.cover, write a cross cover log (cross_cover.html). -write_cross_cover_logs([{App,Coverage}|T]) -> - case last_test_for_app(App) of - false -> - ok; - Dir -> +%% For each application from which there are cross cover analysed +%% modules, write a cross cover log (cross_cover.html). +write_cross_cover_logs([{App,Coverage}|T],Apps) -> + case lists:keyfind(App,1,Apps) of + {_,Dir,Mods} when Mods=/=[] -> CoverLogName = filename:join(Dir,?cross_coverlog_name), {ok,CoverLog} = file:open(CoverLogName, [write]), write_coverlog_header(CoverLog), @@ -5657,54 +5088,51 @@ write_cross_cover_logs([{App,Coverage}|T]) -> "<h1>Coverage results for \'~w\' from all tests</h1>\n", [App]), write_cover_result_table(CoverLog, Coverage), - io:fwrite("Written file ~p\n", [CoverLogName]) + io:fwrite("Written file ~p\n", [CoverLogName]); + _ -> + ok end, - write_cross_cover_logs(T); -write_cross_cover_logs([]) -> + write_cross_cover_logs(T,Apps); +write_cross_cover_logs([],_) -> io:fwrite("done\n", []). -%% Find all exported coverdata files. First find all the latest -%% run.<timestamp> directories, and the check if there is a file named -%% all.coverdata. -get_coverdata_files() -> - PossibleFiles = [last_coverdata_file(Dir) || - Dir <- filelib:wildcard([$*|?logdir_ext]), - filelib:is_dir(Dir)], - [File || File <- PossibleFiles, filelib:is_file(File)]. - -last_coverdata_file(Dir) -> - LastDir = last_test(filelib:wildcard(filename:join(Dir,"run.[1-2]*")),false), - filename:join(LastDir,"all.coverdata"). - - -%% Find the latest run.<timestamp> directory for the given application. -last_test_for_app(App) -> - AppLogDir = atom_to_list(App)++?logdir_ext, - last_test(filelib:wildcard(filename:join(AppLogDir,"run.[1-2]*")),false). - -last_test([Run|Rest], false) -> - last_test(Rest, Run); -last_test([Run|Rest], Latest) when Run > Latest -> - last_test(Rest, Run); -last_test([_|Rest], Latest) -> - last_test(Rest, Latest); -last_test([], Latest) -> +%% Get the latest run.<timestamp> directories +get_latest_run_dirs([{App,Dir}|Apps]) -> + [{App,get_latest_run_dir(Dir)} | get_latest_run_dirs(Apps)]; +get_latest_run_dirs([]) -> + []. + +get_latest_run_dir(Dir) -> + case filelib:wildcard(filename:join(Dir,"run.[1-2]*")) of + [] -> + Dir; + [H|T] -> + get_latest_dir(T,H) + end. + +get_latest_dir([H|T],Latest) when H>Latest -> + get_latest_dir(T,H); +get_latest_dir([_|T],Latest) -> + get_latest_dir(T,Latest); +get_latest_dir([],Latest) -> Latest. -%% Sort modules according to the application they belong to. -%% Return [{App,LastTestDir,ModuleList}] -sort_modules([M|Modules], Acc) -> - App = get_app(M), - Acc1 = - case lists:keysearch(App, 1, Acc) of - {value,{App,LastTest,List}} -> - lists:keyreplace(App, 1, Acc, {App,LastTest,[M|List]}); +%% Associate the cross cover modules with their applications. +add_cross_modules(Mods,Apps)-> + do_add_cross_modules(Mods,[{App,Dir,[]} || {App,Dir} <- Apps]). +do_add_cross_modules([Mod|Mods],Apps)-> + App = get_app(Mod), + NewApps = + case lists:keytake(App,1,Apps) of + {value,{App,Dir,AppMods},Rest} -> + [{App,Dir,lists:umerge([Mod],AppMods)}|Rest]; false -> - [{App,last_test_for_app(App),[M]}|Acc] + Apps end, - sort_modules(Modules, Acc1); -sort_modules([], Acc) -> - Acc. + do_add_cross_modules(Mods,NewApps); +do_add_cross_modules([],Apps) -> + %% Just to get the modules in the same order as app-only cover log + [{App,Dir,lists:reverse(Mods)} || {App,Dir,Mods} <- Apps]. get_app(Module) -> Beam = code:which(Module), @@ -5712,6 +5140,14 @@ get_app(Module) -> [AppStr|_] = string:tokens(AppDir,"-"), list_to_atom(AppStr). +%% Find all exported coverdata files. +get_coverdata_files(Apps) -> + lists:flatmap( + fun({_,LatestAppDir,_}) -> + filelib:wildcard(filename:join(LatestAppDir,"all.coverdata")) + end, + Apps). + %% For each application, analyse all modules %% Used for cross cover analysis. @@ -5732,7 +5168,7 @@ analyse_modules(_Dir, [], _DetailsFun, Acc) -> %% Read the cross cover file (cross.cover) -get_all_cross_modules() -> +get_cross_modules() -> get_cross_modules(all). get_cross_modules(App) -> case file:consult(?cross_cover_file) of @@ -5835,11 +5271,11 @@ write_default_cross_coverlog(TestDir) -> {ok,CrossCoverLog} = file:open(filename:join(TestDir,?cross_coverlog_name), [write]), write_coverlog_header(CrossCoverLog), - io:fwrite(CrossCoverLog, - ["No cross cover modules exist for this application,", - xhtml("<br>","<br />"), - "or cross cover analysis is not completed.\n" - "</body></html>\n"], []), + io:put_chars(CrossCoverLog, + ["No cross cover modules exist for this application,", + xhtml("<br>","<br />"), + "or cross cover analysis is not completed.\n" + "</body></html>\n"]), file:close(CrossCoverLog). write_cover_result_table(CoverLog,Coverage) -> diff --git a/lib/test_server/src/test_server_gl.erl b/lib/test_server/src/test_server_gl.erl new file mode 100644 index 0000000000..d32c7c07dc --- /dev/null +++ b/lib/test_server/src/test_server_gl.erl @@ -0,0 +1,293 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2012. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% +%% +%% This module implements group leader processes for test cases. +%% Each group leader process handles output to the minor log file for +%% a test case, and calls test_server_io to handle output to the common +%% log files. The group leader processes are created and destroyed +%% through the test_server_io module/process. + +-module(test_server_gl). +-export([start_link/0,stop/1,set_minor_fd/3,unset_minor_fd/1, + get_tc_supervisor/1,print/4,set_props/2]). + +-export([init/1,handle_call/3,handle_cast/2,handle_info/2,terminate/2]). + +-record(st, {tc_supervisor :: 'none'|pid(), %Test case supervisor + tc :: mfa(), %Current test case MFA + minor :: 'none'|pid(), %Minor fd + minor_monitor, %Monitor ref for minor fd + capture :: 'none'|pid(), %Capture output + reject_io :: boolean(), %Reject I/O requests... + permit_io, %... and exceptions + auto_nl=true :: boolean(), %Automatically add NL + levels %{Stdout,Major,Minor} + }). + +%% start_link() +%% Start a new group leader process. Only to be called by +%% the test_server_io process. + +start_link() -> + case gen_server:start_link(?MODULE, [], []) of + {ok,Pid} -> + {ok,Pid}; + Other -> + Other + end. + + +%% stop(Pid) +%% Stop a group leader process. Only to be called by +%% the test_server_io process. + +stop(GL) -> + gen_server:cast(GL, stop). + + +%% set_minor_fd(GL, Fd, MFA) +%% GL = Pid for the group leader process +%% Fd = file descriptor for the minor log file +%% MFA = {M,F,A} for the test case owning the minor log file +%% +%% Register the file descriptor for the minor log file. Subsequent +%% IO directed to the minor log file will be written to this file. +%% Also register the currently executing process at the testcase +%% supervisor corresponding to this group leader process. + +set_minor_fd(GL, Fd, MFA) -> + req(GL, {set_minor_fd,Fd,MFA,self()}). + + +%% unset_minor_fd(GL, Fd, MFA) +%% GL = Pid for the group leader process +%% +%% Unregister the file descriptor for minor log file (typically +%% because the test case has ended the minor log file is about +%% to be closed). Subsequent IO (for example, by a process spawned +%% by the testcase process) will go to the unexpected_io log file. + +unset_minor_fd(GL) -> + req(GL, unset_minor_fd). + + +%% get_tc_supervisor(GL) +%% GL = Pid for the group leader process +%% +%% Return the Pid for the process that supervises the test case +%% that has this group leader. + +get_tc_supervisor(GL) -> + req(GL, get_tc_supervisor). + + +%% print(GL, Detail, Format, Args) -> ok +%% GL = Pid for the group leader process +%% Detail = integer() | minor | major | html | stdout +%% Msg = iodata() +%% Printer = internal | pid() +%% +%% Print a message to one of the log files. If Detail is an integer, +%% it will be compared to the levels (set by set_props/2) to +%% determine which log file(s) that are to receive the output. If +%% Detail is an atom, the value of the atom will directly determine +%% which log file to use. IO to the minor log file will be handled +%% directly by this group leader process (printing to the file set by +%% set_minor_fd/3), and all other IO will be handled by calling +%% test_server_io:print/3. + +print(GL, Detail, Msg, Printer) -> + req(GL, {print,Detail,Msg,Printer}). + + +%% set_props(GL, [PropertyTuple]) +%% GL = Pid for the group leader process +%% PropertyTuple = {levels,{Show,Major,Minor}} | +%% {auto_nl,boolean()} | +%% {reject_io_reqs,boolean()} +%% +%% Set properties for this group leader process. + +set_props(GL, PropList) -> + req(GL, {set_props,PropList}). + +%%% Internal functions. + +init([]) -> + {ok,#st{tc_supervisor=none, + minor=none, + minor_monitor=none, + capture=none, + reject_io=false, + permit_io=gb_sets:empty(), + auto_nl=true, + levels={1,19,10} + }}. + +req(GL, Req) -> + gen_server:call(GL, Req, infinity). + +handle_call(get_tc_supervisor, _From, #st{tc_supervisor=Pid}=St) -> + {reply,Pid,St}; +handle_call({set_minor_fd,Fd,MFA,Supervisor}, _From, St) -> + Ref = erlang:monitor(process, Fd), + {reply,ok,St#st{tc=MFA,minor=Fd,minor_monitor=Ref, + tc_supervisor=Supervisor}}; +handle_call(unset_minor_fd, _From, St) -> + {reply,ok,St#st{minor=none,tc_supervisor=none}}; +handle_call({set_props,PropList}, _From, St) -> + {reply,ok,do_set_props(PropList, St)}; +handle_call({print,Detail,Msg,Printer}, {From,_}, St) -> + output(Detail, Msg, Printer, From, St), + {reply,ok,St}. + +handle_cast(stop, St) -> + {stop,normal,St}. + +handle_info({'DOWN',Ref,process,_,_}, #st{minor_monitor=Ref}=St) -> + {noreply,St#st{minor=none,minor_monitor=none}}; +handle_info({permit_io,Pid}, #st{permit_io=P}=St) -> + {noreply,St#st{permit_io=gb_sets:add(Pid, P)}}; +handle_info({capture,Cap0}, St) -> + Cap = case Cap0 of + false -> none; + Pid when is_pid(Cap0) -> Pid + end, + {noreply,St#st{capture=Cap}}; +handle_info({io_request,From,ReplyAs,Req}=IoReq, St) -> + try io_req(Req, From, St) of + passthrough -> + group_leader() ! IoReq; + Data -> + case is_io_permitted(From, St) of + false -> + ok; + true -> + case St of + #st{capture=none} -> + ok; + #st{capture=CapturePid} -> + CapturePid ! {captured,Data} + end, + output(minor, Data, From, From, St) + end, + From ! {io_reply,ReplyAs,ok} + catch + _:_ -> + {io_reply,ReplyAs,{error,arguments}} + end, + {noreply,St}; +handle_info({structured_io,ClientPid,{Detail,Str}}, St) -> + output(Detail, Str, ClientPid, ClientPid, St), + {noreply,St}; +handle_info({printout,Detail,Format,Args}, St) -> + Str = io_lib:format(Format, Args), + output(Detail, Str, internal, none, St), + {noreply,St}; +handle_info(Msg, #st{tc_supervisor=Pid}=St) when is_pid(Pid) -> + %% The process overseeing the testcase process also used to be + %% the group leader; thus, it is widely expected that it can be + %% reached by sending a message to the group leader. Therefore + %% we'll need to forward any non-recognized messaged to the test + %% case supervisor. + Pid ! Msg, + {noreply,St}; +handle_info(_Msg, #st{}=St) -> + %% There is no known supervisor process. Ignore this message. + {noreply,St}. + +terminate(_, _) -> + ok. + +do_set_props([{levels,Levels}|Ps], St) -> + do_set_props(Ps, St#st{levels=Levels}); +do_set_props([{auto_nl,AutoNL}|Ps], St) -> + do_set_props(Ps, St#st{auto_nl=AutoNL}); +do_set_props([{reject_io_reqs,Bool}|Ps], St) -> + do_set_props(Ps, St#st{reject_io=Bool}); +do_set_props([], St) -> St. + +io_req({put_chars,Enc,Bytes}, _, _) when Enc =:= latin1; Enc =:= unicode -> + to_latin1(Enc, Bytes); +io_req({put_chars,Encoding,Mod,Func,[Format,Args]}, _, _) -> + Str = Mod:Func(Format, Args), + to_latin1(Encoding, Str); +io_req(_, _, _) -> passthrough. + +to_latin1(unicode, Str) -> + [if C > 255 -> + io_lib:format("\\{~.8B}", [C]); + true -> + C + end || C <- unicode:characters_to_list(Str, unicode)]; +to_latin1(latin1, Str) -> Str. + +output(Level, Str, Sender, From, St) when is_integer(Level) -> + case selected_by_level(Level, stdout, St) of + true -> output(stdout, Str, Sender, From, St); + false -> ok + end, + case selected_by_level(Level, major, St) of + true -> output(major, Str, Sender, From, St); + false -> ok + end, + case selected_by_level(Level, minor, St) of + true -> output(minor, Str, Sender, From, St); + false -> ok + end; +output(stdout, Str, _Sender, From, St) -> + output_to_file(stdout, Str, From, St); +output(html, Str, _Sender, From, St) -> + output_to_file(html, Str, From, St); +output(Level, Str, Sender, From, St) when is_atom(Level) -> + output_to_file(Level, dress_output(Str, Sender, St), From, St). + +output_to_file(minor, Data0, From, #st{tc={M,F,A},minor=none}) -> + Data = [io_lib:format("=== ~p:~p/~p\n", [M,F,A]),Data0], + test_server_io:print(From, unexpected_io, Data), + ok; +output_to_file(minor, Data, From, #st{minor=Fd}) -> + try + io:put_chars(Fd, Data) + catch + _:_ -> + test_server_io:print(From, unexpected_io, Data) + end; +output_to_file(Detail, Data, From, _) -> + test_server_io:print(From, Detail, Data). + +is_io_permitted(From, #st{reject_io=true,permit_io=P}) -> + gb_sets:is_member(From, P); +is_io_permitted(_, #st{reject_io=false}) -> true. + +selected_by_level(Level, stdout, #st{levels={Stdout,_,_}}) -> + Level =< Stdout; +selected_by_level(Level, major, #st{levels={_,Major,_}}) -> + Level =< Major; +selected_by_level(Level, minor, #st{levels={_,_,Minor}}) -> + Level >= Minor. + +dress_output([$=|_]=Str, internal, _) -> + [Str,$\n]; +dress_output(Str, internal, _) -> + ["=== ",Str,$\n]; +dress_output(Str, _, #st{auto_nl=AutoNL}) -> + case AutoNL of + true -> [Str,$\n]; + false -> Str + end. diff --git a/lib/test_server/src/test_server_internal.hrl b/lib/test_server/src/test_server_internal.hrl index c9c52854e3..d204c35293 100644 --- a/lib/test_server/src/test_server_internal.hrl +++ b/lib/test_server/src/test_server_internal.hrl @@ -24,8 +24,7 @@ %% Target information generated by test_server:init_target_info/0 and %% test_server_ctrl:contact_main_target/2 %% Once initiated, this information will never change!! --record(target_info, {where, % local | Socket - os_family, % atom(); win32 | unix | vxworks | ose +-record(target_info, {os_family, % atom(); win32 | unix os_type, % result of os:type() host, % string(); the name of the target machine version, % string() @@ -43,7 +42,6 @@ % itself is master for slave nodes %% The following are only used for remote targets - target_client, % reference to a client talking to target slave_targets=[]}).% list() of atom(); all available % targets for starting slavenodes diff --git a/lib/test_server/src/test_server_io.erl b/lib/test_server/src/test_server_io.erl new file mode 100644 index 0000000000..e960b3087a --- /dev/null +++ b/lib/test_server/src/test_server_io.erl @@ -0,0 +1,317 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2012. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% +%% +%% This module implements a process with the registered name 'test_server_io', +%% which has two main responsibilities: +%% +%% * Manage group leader processes (see the test_server_gl module) +%% for test cases. A group_leader process is obtained by calling +%% get_gl/1. Group leader processes will be kept alive as along as +%% the 'test_server_io' process is alive. +%% +%% * Handle output to the common log files (stdout, major, html, +%% unexpected_io). +%% + +-module(test_server_io). +-export([start_link/0,stop/0,get_gl/1,set_fd/2, + start_transaction/0,end_transaction/0,print_buffered/1,print/3, + set_footer/1,set_job_name/1,set_gl_props/1]). + +-export([init/1,handle_call/3,handle_info/2,terminate/2]). + +-record(st, {fds, %Singleton fds (gb_tree) + shared_gl :: pid(), %Shared group leader + gls, %Group leaders (gb_set) + io_buffering=false, %I/O buffering + buffered, %Buffered I/O requests + html_footer, %HTML footer + job_name, %Name of current job. + gl_props, %Properties for GL. + stopping + }). + +start_link() -> + case gen_server:start_link({local,?MODULE}, ?MODULE, [], []) of + {ok,Pid} -> + {ok,Pid}; + Other -> + Other + end. + +stop() -> + OldGL = group_leader(), + group_leader(self(), self()), + req(stop), + group_leader(OldGL, self()), + ok. + +%% get_gl(Shared) -> Pid +%% Shared = boolean() +%% Pid = pid() +%% +%% Return a group leader (a process using the test_server_gl module). +%% If Shared is true, the shared group leader is returned (suitable for +%% running sequential test cases), otherwise a new group leader process +%% is spawned. Group leader processes will live until the +%% 'test_server_io' process is stopped. + +get_gl(Shared) when is_boolean(Shared) -> + req({get_gl,Shared}). + +%% set_fd(Tag, Fd) -> ok. +%% Tag = major | html | unexpected_io +%% Fd = a file descriptor (as returned by file:open/2) +%% +%% Associate a file descriptor with the given Tag. This +%% Tag can later be used in when calling to print/3. + +set_fd(Tag, Fd) -> + req({set_fd,Tag,Fd}). + +%% start_transaction() +%% +%% Subsequent calls to print/3 from the process executing start_transaction/0 +%% will cause the messages to be buffered instead of printed directly. + +start_transaction() -> + req({start_transaction,self()}). + +%% end_transaction() +%% +%% End the transaction started by start_transaction/0. Subsequent calls to +%% print/3 will cause the message to be printed directly. + +end_transaction() -> + req({end_transaction,self()}). + +%% print(From, Tag, Msg) +%% From = pid() +%% Tag = stdout, or any tag that has been registered using set_fd/2 +%% Msg = string or iolist +%% +%% Either print Msg to the file identified by Tag, or buffer the message +%% start_transaction/0 has been called from the process From. +%% +%% NOTE: The tags have various special meanings. For example, 'html' +%% is assumed to be a HTML file. + +print(From, Tag, Msg) -> + req({print,From,Tag,Msg}). + +%% print_buffered(Pid) +%% Pid = pid() +%% +%% Print all messages buffered in the *first* transaction buffered for Pid. +%% (If start_transaction/0 and end_transaction/0 has been called N times, +%% print_buffered/1 must be called N times to print all transactions.) + +print_buffered(Pid) -> + req({print_buffered,Pid}). + +%% set_footer(IoData) +%% +%% Set a footer for the file associated with the 'html' tag. +%% It will be used by print/3 to print a footer for the HTML file. + +set_footer(Footer) -> + req({set_footer,Footer}). + +%% set_job_name(Name) +%% Set a name for the currently running job. The name will be used +%% when printing to 'stdout'. +%% +set_job_name(Name) -> + req({set_job_name,Name}). + +%% set_gl_props(PropList) +%% Set properties for group leader processes. When a group_leader process +%% is created, test_server_gl:set_props(PropList) will be called. + +set_gl_props(PropList) -> + req({set_gl_props,PropList}). + + +%%% Internal functions. + +init([]) -> + process_flag(trap_exit, true), + Empty = gb_trees:empty(), + {ok,Shared} = test_server_gl:start_link(), + {ok,#st{fds=Empty,shared_gl=Shared,gls=gb_sets:empty(), + io_buffering=gb_sets:empty(), + buffered=Empty, + html_footer="</body>\n</html>\n", + job_name="<name not set>", + gl_props=[]}}. + +req(Req) -> + gen_server:call(?MODULE, Req, infinity). + +handle_call({get_gl,false}, _From, #st{gls=Gls,gl_props=Props}=St) -> + {ok,Pid} = test_server_gl:start_link(), + test_server_gl:set_props(Pid, Props), + {reply,Pid,St#st{gls=gb_sets:insert(Pid, Gls)}}; +handle_call({get_gl,true}, _From, #st{shared_gl=Shared}=St) -> + {reply,Shared,St}; +handle_call({set_fd,Tag,Fd}, _From, #st{fds=Fds0}=St) -> + Fds = gb_trees:enter(Tag, Fd, Fds0), + {reply,ok,St#st{fds=Fds}}; +handle_call({start_transaction,Pid}, _From, #st{io_buffering=Buffer0, + buffered=Buf0}=St) -> + Buf = case gb_trees:is_defined(Pid, Buf0) of + false -> gb_trees:insert(Pid, queue:new(), Buf0); + true -> Buf0 + end, + Buffer = gb_sets:add(Pid, Buffer0), + {reply,ok,St#st{io_buffering=Buffer,buffered=Buf}}; +handle_call({print,From,Tag,Str}, _From, St0) -> + St = output(From, Tag, Str, St0), + {reply,ok,St}; +handle_call({end_transaction,Pid}, _From, #st{io_buffering=Buffer0, + buffered=Buffered0}=St0) -> + Q0 = gb_trees:get(Pid, Buffered0), + Q = queue:in(eot, Q0), + Buffered = gb_trees:update(Pid, Q, Buffered0), + Buffer = gb_sets:delete_any(Pid, Buffer0), + St = St0#st{io_buffering=Buffer,buffered=Buffered}, + {reply,ok,St}; +handle_call({print_buffered,Pid}, _From, #st{buffered=Buffered0}=St0) -> + Q0 = gb_trees:get(Pid, Buffered0), + Q = do_print_buffered(Q0, St0), + Buffered = gb_trees:update(Pid, Q, Buffered0), + St = St0#st{buffered=Buffered}, + {reply,ok,St}; +handle_call({set_footer,Footer}, _From, St) -> + {reply,ok,St#st{html_footer=Footer}}; +handle_call({set_job_name,Name}, _From, St) -> + {reply,ok,St#st{job_name=Name}}; +handle_call({set_gl_props,Props}, _From, #st{shared_gl=Shared}=St) -> + test_server_gl:set_props(Shared, Props), + {reply,ok,St#st{gl_props=Props}}; +handle_call(stop, From, #st{shared_gl=SGL,gls=Gls0}=St0) -> + St = St0#st{gls=gb_sets:insert(SGL, Gls0),stopping=From}, + gc(St), + %% Give the users of the surviving group leaders some + %% time to finish. + erlang:send_after(2000, self(), stop_group_leaders), + {noreply,St}. + +handle_info({'EXIT',Pid,normal}, #st{gls=Gls0,stopping=From}=St) -> + Gls = gb_sets:delete_any(Pid, Gls0), + case gb_sets:is_empty(Gls) andalso stopping =/= undefined of + true -> + %% No more group leaders left. + gen_server:reply(From, ok), + {stop,normal,St#st{gls=Gls,stopping=undefined}}; + false -> + %% Wait for more group leaders to finish. + {noreply,St#st{gls=Gls}} + end; +handle_info({'EXIT',_Pid,Reason}, _St) -> + exit(Reason); +handle_info(stop_group_leaders, #st{gls=Gls}=St) -> + %% Stop the remaining group leaders. + [test_server_gl:stop(GL) || GL <- gb_sets:to_list(Gls)], + erlang:send_after(2000, self(), kill_group_leaders), + {noreply,St}; +handle_info(kill_group_leaders, #st{gls=Gls,stopping=From}=St) -> + [exit(GL, kill) || GL <- gb_sets:to_list(Gls)], + gen_server:reply(From, ok), + {stop,normal,St}; +handle_info(Other, St) -> + io:format("Ignoring: ~p\n", [Other]), + {noreply,St}. + +terminate(_, _) -> + ok. + +output(From, Tag, Str, #st{io_buffering=Buffered,buffered=Buf0}=St) -> + case gb_sets:is_member(From, Buffered) of + false -> + do_output(Tag, Str, St), + St; + true -> + Q0 = gb_trees:get(From, Buf0), + Q = queue:in({Tag,Str}, Q0), + Buf = gb_trees:update(From, Q, Buf0), + St#st{buffered=Buf} + end. + +do_output(stdout, Str, #st{job_name=undefined}) -> + io:put_chars(Str); +do_output(stdout, Str0, #st{job_name=Name}) -> + Str = io_lib:format("Testing ~s: ~s\n", [Name,Str0]), + io:put_chars(Str); +do_output(Tag, Str, #st{fds=Fds}=St) -> + case gb_trees:lookup(Tag, Fds) of + none -> + S = io_lib:format("\n*** ERROR: ~p, line ~p: No known '~p' log file\n", + [?MODULE,?LINE,Tag]), + do_output(stdout, [S,Str], St); + {value,Fd} -> + try + io:put_chars(Fd, Str), + case Tag of + html -> finalise_table(Fd, St); + _ -> ok + end + catch _:Error -> + S = io_lib:format("\n*** ERROR: ~p, line ~p: Error writing to " + "log file '~p': ~p\n", + [?MODULE,?LINE,Tag,Error]), + do_output(stdout, [S,Str], St) + end + end. + +finalise_table(Fd, #st{html_footer=Footer}) -> + case file:position(Fd, {cur,0}) of + {ok,Pos} -> + %% We are writing to a seekable file. Finalise so + %% we get complete valid (and viewable) HTML code. + %% Then rewind to overwrite the finalising code. + io:put_chars(Fd, ["\n</table>\n",Footer]), + file:position(Fd, Pos); + {error,epipe} -> + %% The file is not seekable. We cannot erase what + %% we've already written --- so the reader will + %% have to wait until we're done. + ok + end. + +do_print_buffered(Q0, St) -> + Item = queue:get(Q0), + Q = queue:drop(Q0), + case Item of + eot -> + Q; + {Tag,Str} -> + do_output(Tag, Str, St), + do_print_buffered(Q, St) + end. + +gc(#st{gls=Gls0}) -> + InUse0 = [begin + {group_leader,GL} = process_info(P, group_leader), + GL + end || P <- processes()], + InUse = ordsets:from_list(InUse0), + Gls = gb_sets:to_list(Gls0), + NotUsed = ordsets:subtract(Gls, InUse), + [test_server_gl:stop(Pid) || Pid <- NotUsed], + ok. diff --git a/lib/test_server/src/test_server_node.erl b/lib/test_server/src/test_server_node.erl index 6358efa764..b307d93c7d 100644 --- a/lib/test_server/src/test_server_node.erl +++ b/lib/test_server/src/test_server_node.erl @@ -26,7 +26,7 @@ %% Test Controller interface -export([is_release_available/1]). --export([start_remote_main_target/1,stop/1]). +-export([stop/1]). -export([start_tracer_node/2,trace_nodes/2,stop_tracer_node/1]). -export([start_node/5, stop_node/2]). -export([kill_nodes/1, nodedown/2]). @@ -35,7 +35,6 @@ -include("test_server_internal.hrl"). -record(slave_info, {name,socket,client}). --define(VXWORKS_ACCEPT_TIMEOUT,?ACCEPT_TIMEOUT). %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%% %%% @@ -58,87 +57,8 @@ is_release_available(Rel) -> false end. -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%%% Start main target node on remote host -%%% The target node must not know the controller node via erlang distribution. -start_remote_main_target(Parameters) -> - #par{type=TargetType, - target=TargetHost, - naming=Naming, - master=MasterNode, - cookie=MasterCookie, - slave_targets=SlaveTargets} = Parameters, - - lists:foreach(fun(T) -> maybe_reboot_target({TargetType,T}) end, - [list_to_atom(TargetHost)|SlaveTargets]), - - % Must give the targets a chance to reboot... - case TargetType of - vxworks -> - receive after 15000 -> ok end; - _ -> - ok - end, - - Cmd0 = get_main_target_start_command(TargetType,TargetHost,Naming, - MasterNode,MasterCookie), - Cmd = - case os:getenv("TEST_SERVER_FRAMEWORK") of - FW when FW =:= false; FW =:= "undefined" -> Cmd0; - FW -> Cmd0 ++ " -env TEST_SERVER_FRAMEWORK " ++ FW - end, - - {ok,LSock} = gen_tcp:listen(?MAIN_PORT,[binary,{reuseaddr,true},{packet,2}]), - case start_target(TargetType,TargetHost,Cmd) of - {ok,TargetClient,AcceptTimeout} -> - case gen_tcp:accept(LSock,AcceptTimeout) of - {ok,Sock} -> - gen_tcp:close(LSock), - receive - {tcp,Sock,Bin} when is_binary(Bin) -> - case unpack(Bin) of - error -> - gen_tcp:close(Sock), - close_target_client(TargetClient), - {error,bad_message}; - {ok,{target_info,TI}} -> - put(test_server_free_targets,SlaveTargets), - {ok, TI#target_info{where=Sock, - host=TargetHost, - naming=Naming, - master=MasterNode, - target_client=TargetClient, - slave_targets=SlaveTargets}} - end; - {tcp_closed,Sock} -> - gen_tcp:close(Sock), - close_target_client(TargetClient), - {error,could_not_contact_target} - after AcceptTimeout -> - gen_tcp:close(Sock), - close_target_client(TargetClient), - {error,timeout} - end; - Error -> - %%! maybe something like kill_target(...)??? - gen_tcp:close(LSock), - close_target_client(TargetClient), - {error,{could_not_contact_target,Error}} - end; - Error -> - gen_tcp:close(LSock), - {error,{could_not_start_target,Error}} - end. - stop(TI) -> - kill_nodes(TI), - case TI#target_info.where of - local -> % there is no remote target to stop - ok; - Sock -> % stop remote target - gen_tcp:close(Sock), - close_target_client(TI#target_info.target_client) - end. + kill_nodes(TI). nodedown(Sock, TI) -> Match = #slave_info{name='$1',socket=Sock,client='$2',_='_'}, @@ -155,14 +75,8 @@ nodedown(Sock, TI) -> false -> ok end, slave_died; - [] -> - case TI#target_info.where of - Sock -> - %% test_server_ctrl will do the cleanup - target_died; - _ -> - ignore - end + [] -> + ok end. @@ -176,10 +90,7 @@ start_tracer_node(TraceFile,TI) -> Match = #slave_info{name='$1',_='_'}, SlaveNodes = lists:map(fun([N]) -> [" ",N] end, ets:match(slave_tab,Match)), - TargetNode = case TI#target_info.where of - local -> node(); - _ -> "test_server@" ++ TI#target_info.host - end, + TargetNode = node(), Cookie = TI#target_info.cookie, {ok,LSock} = gen_tcp:listen(0,[binary,{reuseaddr,true},{packet,2}]), {ok,TracePort} = inet:port(LSock), @@ -433,10 +344,12 @@ start_node_peer(SlaveName, OptList, From, TI) -> %% Bad environment can cause open port to fail. If this happens, %% we ignore it and let the testcase handle the situation... catch open_port({spawn, Cmd}, [stream|Opts]), + + Tmo = 60000 * test_server:timetrap_scale_factor(), case start_node_get_option_value(wait, OptList, true) of true -> - Ret = wait_for_node_started(LSock,60000,undefined,Cleanup,TI,self()), + Ret = wait_for_node_started(LSock,Tmo,undefined,Cleanup,TI,self()), case {Ret,FailOnError} of {{{ok, Node}, Warning},_} -> gen_server:reply(From,{{ok,Node},HostStr,Cmd,[],Warning}); @@ -452,7 +365,7 @@ start_node_peer(SlaveName, OptList, From, TI) -> Self = self(), spawn_link( fun() -> - wait_for_node_started(LSock,60000,undefined, + wait_for_node_started(LSock,Tmo,undefined, Cleanup,TI,Self), receive after infinity -> ok end end), @@ -462,9 +375,6 @@ start_node_peer(SlaveName, OptList, From, TI) -> %% %% Slave nodes are started on a remote host if %% - the option remote is given when calling test_server:start_node/3 -%% or -%% - the target type is vxworks, since only one erlang node -%% can be started on each vxworks host. %% start_node_slave(SlaveName, OptList, From, TI) -> SuppliedArgs = start_node_get_option_value(args, OptList, []), @@ -481,129 +391,29 @@ start_node_slave(SlaveName, OptList, From, TI) -> Ret = case start_which_node(OptList) of {error,Reason} -> {{error,Reason},undefined,undefined}; - Host0 -> do_start_node_slave(Host0,SlaveName,Args,Prog,Cleanup,TI) + Host0 -> do_start_node_slave(Host0,SlaveName,Args,Prog,Cleanup) end, gen_server:reply(From,Ret). -do_start_node_slave(Host0, SlaveName, Args, Prog, Cleanup, TI) -> - case TI#target_info.where of - local -> - Host = - case Host0 of - local -> test_server_sup:hoststr(); - _ -> cast_to_list(Host0) - end, - Cmd = Prog ++ " " ++ Args, - %% Can use slave.erl here because I'm both controller and target - %% so I will ping the new node anyway - case slave:start(Host, SlaveName, Args, no_link, Prog) of - {ok,Nodename} -> - case Cleanup of - true -> ets:insert(slave_tab,#slave_info{name=Nodename}); - false -> ok - end, - {{ok,Nodename}, Host, Cmd, [], []}; - Ret -> - {Ret, Host, Cmd} - end; - - _Sock -> - %% Cannot use slave.erl here because I'm only controller, and will - %% not ping the new node. Only target shall contact the new node!! - no_contact_start_slave(Host0,SlaveName,Args,Prog,Cleanup,TI) - end. - - - -no_contact_start_slave(Host, Name, Args0, Prog, Cleanup,TI) -> - Args1 = case string:str(Args0,"-setcookie") of - 0 -> "-setcookie " ++ TI#target_info.cookie ++ " " ++ Args0; - _ -> Args0 +do_start_node_slave(Host0, SlaveName, Args, Prog, Cleanup) -> + Host = + case Host0 of + local -> test_server_sup:hoststr(); + _ -> cast_to_list(Host0) + end, + Cmd = Prog ++ " " ++ Args, + %% Can use slave.erl here because I'm both controller and target + %% so I will ping the new node anyway + case slave:start(Host, SlaveName, Args, no_link, Prog) of + {ok,Nodename} -> + case Cleanup of + true -> ets:insert(slave_tab,#slave_info{name=Nodename}); + false -> ok end, - Args = TI#target_info.naming ++ " " ++ cast_to_list(Name) ++ " " ++ Args1, - case Host of - local -> - case get(test_server_free_targets) of - [] -> - io:format("Starting slave ~p on HOST~n", [Name]), - TargetType = test_server_sup:get_os_family(), - Cmd0 = get_slave_node_start_command(TargetType, - Prog, - TI#target_info.master), - Cmd = Cmd0 ++ " " ++ Args, - do_no_contact_start_slave(TargetType, - test_server_sup:hoststr(), - Cmd, Cleanup,TI, false); - [H|T] -> - TargetType = TI#target_info.os_family, - Cmd0 = get_slave_node_start_command(TargetType, - Prog, - TI#target_info.master), - Cmd = Cmd0 ++ " " ++ Args, - case do_no_contact_start_slave(TargetType,H,Cmd,Cleanup, - TI,true) of - {error,remove} -> - io:format("Cannot start node on ~p, " - "removing from slave " - "target list.", [H]), - put(test_server_free_targets,T), - no_contact_start_slave(Host,Name,Args,Prog, - Cleanup,TI); - {error,keep} -> - %% H is added to the END OF THE LIST - %% in order to avoid the same target to - %% be selected each time - put(test_server_free_targets,T++[H]), - no_contact_start_slave(Host,Name,Args,Prog, - Cleanup,TI); - R -> - put(test_server_free_targets,T), - R - end - end; - _ -> - TargetType = TI#target_info.os_family, - Cmd0 = get_slave_node_start_command(TargetType, - Prog, - TI#target_info.master), - Cmd = Cmd0 ++ " " ++ Args, - do_no_contact_start_slave(TargetType, Host, Cmd, Cleanup, TI, false) - end. - -do_no_contact_start_slave(TargetType,Host0,Cmd0,Cleanup,TI,Retry) -> - %% Must use TargetType instead of TI#target_info.os_familiy here - %% because if there were no free_targets we will be starting the - %% slave node on host which might have a different os_familiy - Host = cast_to_list(Host0), - {ok,LSock} = gen_tcp:listen(0,[binary, - {reuseaddr,true}, - {packet,2}]), - {ok,WaitPort} = inet:port(LSock), - Cmd = lists:concat([Cmd0, " -s ", ?MODULE, " node_started ", - test_server_sup:hoststr(), " ", WaitPort]), - - case start_target(TargetType,Host,Cmd) of - {ok,Client,AcceptTimeout} -> - case wait_for_node_started(LSock,AcceptTimeout, - Client,Cleanup,TI,self()) of - {error,_}=WaitError -> - if Retry -> - case maybe_reboot_target(Client) of - {error,_} -> {error,remove}; - ok -> {error,keep} - end; - true -> - {WaitError,Host,Cmd} - end; - {Ok,Warning} -> - {Ok,Host,Cmd,[],Warning} - end; - StartError -> - gen_tcp:close(LSock), - if Retry -> {error,remove}; - true -> {{error,{could_not_start_target,StartError}},Host,Cmd} - end + {{ok,Nodename}, Host, Cmd, [], []}; + Ret -> + {Ret, Host, Cmd} end. @@ -787,71 +597,10 @@ kill_node(SI,TI) -> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%% Platform specific code -start_target(vxworks,TargetHost,Cmd) -> - case vxworks_client:open(TargetHost) of - {ok,P} -> - case vxworks_client:send_data(P,Cmd,"start_erl called") of - {ok,_} -> - {ok,{vxworks,P},?VXWORKS_ACCEPT_TIMEOUT}; - Error -> - Error - end; - Error -> - Error - end; - -start_target(unix,TargetHost,Cmd0) -> - Cmd = - case test_server_sup:hoststr() of - TargetHost -> Cmd0; - _ -> lists:concat(["rsh ",TargetHost, " ", Cmd0]) - end, - open_port({spawn, Cmd}, [stream]), - {ok,undefined,?ACCEPT_TIMEOUT}. - -maybe_reboot_target({vxworks,P}) when is_pid(P) -> - %% Reboot the vxworks card. - %% Client is also closed after this, even if reboot fails - vxworks_client:send_data_wait_for_close(P,"q"); -maybe_reboot_target({vxworks,T}) when is_atom(T) -> - %% Reboot the vxworks card. - %% Client is also closed after this, even if reboot fails - vxworks_client:reboot(T); -maybe_reboot_target(_) -> - {error, cannot_reboot_target}. - -close_target_client({vxworks,P}) -> - vxworks_client:close(P); close_target_client(undefined) -> ok. - -%% -%% Command for starting main target -%% -get_main_target_start_command(vxworks,_TargetHost,Naming, - _MasterNode,_MasterCookie) -> - "e" ++ Naming ++ " test_server -boot start_sasl" - " -sasl errlog_type error" - " -s test_server start " ++ test_server_sup:hoststr(); -get_main_target_start_command(unix,_TargetHost,Naming, - _MasterNode,_MasterCookie) -> - Prog = pick_erl_program(default), - Prog ++ " " ++ Naming ++ " test_server" ++ - " -boot start_sasl -sasl errlog_type error" - " -s test_server start " ++ test_server_sup:hoststr(). - -%% -%% Command for starting slave nodes -%% -get_slave_node_start_command(vxworks, _Prog, _MasterNode) -> - "e"; - %"e-noinput -master " ++ MasterNode; -get_slave_node_start_command(unix, Prog, MasterNode) -> - cast_to_list(Prog) ++ " -detached -master " ++ MasterNode. - - %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%% cast_to_list(X) -> string() %%% X = list() | atom() | void() diff --git a/lib/test_server/src/test_server_sup.erl b/lib/test_server/src/test_server_sup.erl index 9d111ff769..c7553cccb5 100644 --- a/lib/test_server/src/test_server_sup.erl +++ b/lib/test_server/src/test_server_sup.erl @@ -64,13 +64,7 @@ timetrap(Timeout0, ReportTVal, Scale, Pid) -> true -> ReportTVal end, MFLs = test_server:get_loc(Pid), Mon = erlang:monitor(process, Pid), - Trap = - case get(test_server_init_or_end_conf) of - undefined -> - {timetrap_timeout,TimeToReport,MFLs}; - InitOrEnd -> - {timetrap_timeout,TimeToReport,MFLs,InitOrEnd} - end, + Trap = {timetrap_timeout,TimeToReport,MFLs}, exit(Pid, Trap), receive {'DOWN', Mon, process, Pid, _} -> @@ -473,10 +467,8 @@ getenv_any([]) -> "". %% %% Returns the OS family get_os_family() -> - case os:type() of - {OsFamily,_OsName} -> OsFamily; - OsFamily -> OsFamily - end. + {OsFamily,_OsName} = os:type(), + OsFamily. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% @@ -520,8 +512,18 @@ framework_call(Callback,Func,Args,DefaultReturn) -> end, case erlang:function_exported(Mod,Func,length(Args)) of true -> - put(test_server_loc, {Mod,Func,framework}), EH = fun(Reason) -> exit({fw_error,{Mod,Func,Reason}}) end, + SetTcState = case Func of + end_tc -> true; + init_tc -> true; + _ -> false + end, + case SetTcState of + true -> + test_server:set_tc_state({framework,Mod,Func}); + false -> + ok + end, try apply(Mod,Func,Args) of Result -> Result @@ -552,18 +554,6 @@ format_loc([{Mod,LineOrFunc}]) -> format_loc({Mod,LineOrFunc}); format_loc({Mod,Func}) when is_atom(Func) -> io_lib:format("{~s,~w}",[package_str(Mod),Func]); -format_loc({Mod,Line}) when is_integer(Line) -> - %% ?line macro is used - ModStr = package_str(Mod), - case {lists:member(no_src, get(test_server_logopts)), - lists:reverse(ModStr)} of - {false,[$E,$T,$I,$U,$S,$_|_]} -> - io_lib:format("{~s,<a href=\"~s~s#~w\">~w</a>}", - [ModStr,downcase(ModStr),?src_listing_ext, - round_to_10(Line),Line]); - _ -> - io_lib:format("{~s,~w}",[ModStr,Line]) - end; format_loc(Loc) -> io_lib:format("~p",[Loc]). @@ -578,16 +568,11 @@ format_loc1({Mod,Func,Line}) -> {false,[$E,$T,$I,$U,$S,$_|_]} -> io_lib:format("{~s,~w,<a href=\"~s~s#~w\">~w</a>}", [ModStr,Func,downcase(ModStr),?src_listing_ext, - round_to_10(Line),Line]); + Line,Line]); _ -> io_lib:format("{~s,~w,~w}",[ModStr,Func,Line]) end. -round_to_10(N) when (N rem 10) == 0 -> - N; -round_to_10(N) -> - trunc(N/10)*10. - downcase(S) -> downcase(S, []). downcase([Uc|Rest], Result) when $A =< Uc, Uc =< $Z -> downcase(Rest, [Uc-$A+$a|Result]); diff --git a/lib/test_server/src/ts.erl b/lib/test_server/src/ts.erl index 5fbc0ee017..115e783070 100644 --- a/lib/test_server/src/ts.erl +++ b/lib/test_server/src/ts.erl @@ -25,9 +25,9 @@ -module(ts). -export([run/0, run/1, run/2, run/3, run/4, - clean/0, clean/1, tests/0, tests/1, - install/0, install/1, index/0, + install/0, install/1, + bench/0, bench/1, bench/2, benchmarks/0, estone/0, estone/1, cross_cover_analyse/1, compile_testcases/0, compile_testcases/1, @@ -40,20 +40,14 @@ %%% the modules: %%% %%% +-- ts_install --+------ ts_autoconf_win32 -%%% | | -%%% | +------ ts_autoconf_vxworks %%% | %%% ts ---+ +------ ts_erl_config %%% | | ts_lib -%%% | +------ ts_make -%%% | | -%%% +-- ts_run -----+ -%%% | ts_filelib -%%% +------ ts_make_erl -%%% | -%%% +------ ts_reports (indirectly) -%%% -%%% +%%% +-- ts_run -----+------ ts_make +%%% | | ts_filelib +%%% | +------ ts_make_erl +%%% | +%%% +-- ts_benchmark %%% %%% The modules ts_lib and ts_filelib contains utilities used by %%% the other modules. @@ -63,8 +57,7 @@ %%% ts Frontend to the test server framework. Contains all %%% interface functions. %%% ts_install Installs the test suite. On Unix, `autoconf' is -%%% is used; on Windows, ts_autoconf_win32 is used, -%%% on VxWorks, ts_autoconf_vxworks is used. +%%% is used; on Windows, ts_autoconf_win32 is used. %%% The result is written to the file `variables'. %%% ts_run Supervises running of the tests. %%% ts_autconf_win32 An `autoconf' for Windows. @@ -77,10 +70,9 @@ %%% and other platforms. %%% ts_make_erl A corrected version of the standar Erlang module %%% make (used for rebuilding test suites). -%%% ts_reports Generates index pages in HTML, providing a summary -%%% of the tests run. %%% ts_lib Miscellanous utility functions, each used by several %%% other modules. +%%% ts_benchmark Supervises otp benchmarks and collects results. %%%---------------------------------------------------------------------- -include_lib("kernel/include/file.hrl"). @@ -128,7 +120,7 @@ help(installed) -> " ts:run(Spec, Mod) - Run a single test suite.\n", " ts:run(Spec, Mod, Case)\n", " - Run a single test case.\n", - " All above run functions can have the additional Options argument\n", + " All above run functions can have an additional Options argument\n", " which is a list of options.\n", "\n", "Run options supported:\n", @@ -158,13 +150,10 @@ help(installed) -> " {ctp | ctpl, Mod, Func}\n", " {ctp | ctpl, Mod, Func, Arity}\n", "\n", - "Support functions\n", + "Support functions:\n", " ts:tests() - Shows all available families of tests.\n", " ts:tests(Spec) - Shows all available test modules in Spec,\n", " i.e. ../Spec_test/*_SUITE.erl\n", - " ts:index() - Updates local index page.\n", - " ts:clean() - Cleans up all but the last tests run.\n", - " ts:clean(all) - Cleans up all test runs found.\n", " ts:estone() - Run estone_SUITE in kernel application with\n" " no run options\n", " ts:estone(Opts) - Run estone_SUITE in kernel application with\n" @@ -179,6 +168,13 @@ help(installed) -> " - Compile all testcases for usage in a cross ~n" " compile environment." " \n" + "Benchmark functions:\n" + " ts:benchmarks() - Get all available families of benchmarks\n" + " ts:bench() - Runs all benchmarks\n" + " ts:bench(Spec) - Runs all benchmarks in the given spec file.\n" + " The spec file is actually ../*_test/Spec_bench.spec\n\n" + " ts:bench can take the same Options argument as ts:run.\n" + "\n" "Installation (already done):\n" ], show_help([H,?install_help]). @@ -193,33 +189,6 @@ install() -> install(Options) when is_list(Options) -> ts_install:install(install_local,Options). -%% Updates the local index page. - -index() -> - check_and_run(fun(_Vars) -> ts_reports:make_index(), ok end). - -%% -%% clean(all) -%% Deletes all logfiles. -%% -clean(all) -> - delete_files(filelib:wildcard("*" ++ ?logdir_ext)). - -%% clean/0 -%% -%% Cleans up run logfiles, all but the last run. -clean() -> - clean1(filelib:wildcard("*" ++ ?logdir_ext)). - -clean1([Dir|Dirs]) -> - List0 = filelib:wildcard(filename:join(Dir, "run.*")), - case lists:reverse(lists:sort(List0)) of - [] -> ok; - [_Last|Rest] -> delete_files(Rest) - end, - clean1(Dirs); -clean1([]) -> ok. - %% run/0 %% Runs all specs found by ts:tests(), if any, or returns %% {error, no_tests_available}. (batch) @@ -520,6 +489,25 @@ tests(Spec) -> {ok, Cwd} = file:get_cwd(), ts_lib:suites(Cwd, atom_to_list(Spec)). +%% Benchmark related functions + +bench() -> + bench([]). + +bench(Opts) when is_list(Opts) -> + bench(benchmarks(),Opts); +bench(Spec) -> + bench([Spec],[]). + +bench(Spec, Opts) when is_atom(Spec) -> + bench([Spec],Opts); +bench(Specs, Opts) -> + check_and_run(fun(Vars) -> ts_benchmark:run(Specs, Opts, Vars) end). + +benchmarks() -> + ts_benchmark:benchmarks(). + + %% %% estone/0, estone/1 @@ -539,8 +527,60 @@ estone(Opts) when is_list(Opts) -> run(emulator,estone_SUITE,Opts). cross_cover_analyse([Level]) -> cross_cover_analyse(Level); cross_cover_analyse(Level) -> - test_server_ctrl:cross_cover_analyse(Level). - + Apps = get_last_app_tests(), + Modules = get_cross_modules(Apps,[]), + test_server_ctrl:cross_cover_analyse(Level,Apps,Modules). + +get_last_app_tests() -> + AllTests = filelib:wildcard(filename:join(["*","*_test.logs"])), + {ok,RE} = re:compile("^[^/]*/[^\.]*\.(.*)_test\.logs$"), + get_last_app_tests(AllTests,RE,[]). + +get_last_app_tests([Dir|Dirs],RE,Acc) -> + NewAcc = + case re:run(Dir,RE,[{capture,all,list}]) of + {match,[Dir,AppStr]} -> + App = list_to_atom(AppStr), + case lists:keytake(App,1,Acc) of + {value,{App,LastDir},Rest} -> + if Dir > LastDir -> + [{App,Dir}|Rest]; + true -> + Acc + end; + false -> + [{App,Dir} | Acc] + end; + _ -> + Acc + end, + get_last_app_tests(Dirs,RE,NewAcc); +get_last_app_tests([],_,Acc) -> + Acc. + +get_cross_modules([{App,_}|Apps],Acc) -> + Mods = cross_modules(App), + get_cross_modules(Apps,lists:umerge(Mods,Acc)); +get_cross_modules([],Acc) -> + Acc. + +cross_modules(App) -> + case default_coverfile(App) of + none -> + []; + File -> + case catch file:consult(File) of + {ok,CoverSpec} -> + case lists:keyfind(cross_apps,1,CoverSpec) of + false -> + []; + {cross_apps,App,Modules} -> + lists:usort(Modules) + end; + _ -> + [] + end + end. %%% Implementation. @@ -581,32 +621,6 @@ run_test(File, Args, Options) -> run_test(File, Args, Options, Vars) -> ts_run:run(File, Args, Options, Vars). - -delete_files([]) -> ok; -delete_files([Item|Rest]) -> - case file:delete(Item) of - ok -> - delete_files(Rest); - {error,eperm} -> - file:change_mode(Item, 8#777), - delete_files(filelib:wildcard(filename:join(Item, "*"))), - file:del_dir(Item), - ok; - {error,eacces} -> - %% We'll see about that! - file:change_mode(Item, 8#777), - case file:delete(Item) of - ok -> ok; - {error,_} -> - erlang:yield(), - file:change_mode(Item, 8#777), - file:delete(Item), - ok - end; - {error,_} -> ok - end, - delete_files(Rest). - %% This module provides some convenient shortcuts to running %% the test server from within a started Erlang shell. diff --git a/lib/test_server/src/ts_autoconf_vxworks.erl b/lib/test_server/src/ts_autoconf_vxworks.erl deleted file mode 100644 index f4535cd89a..0000000000 --- a/lib/test_server/src/ts_autoconf_vxworks.erl +++ /dev/null @@ -1,191 +0,0 @@ -%% -%% %CopyrightBegin% -%% -%% Copyright Ericsson AB 1997-2009. All Rights Reserved. -%% -%% The contents of this file are subject to the Erlang Public License, -%% Version 1.1, (the "License"); you may not use this file except in -%% compliance with the License. You should have received a copy of the -%% Erlang Public License along with this software. If not, it can be -%% retrieved online at http://www.erlang.org/. -%% -%% Software distributed under the License is distributed on an "AS IS" -%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See -%% the License for the specific language governing rights and limitations -%% under the License. -%% -%% %CopyrightEnd% -%% - -%%% Purpose : Autoconf for cross environments. - --module(ts_autoconf_vxworks). --export([configure/1]). -%%% Supported cross platforms: --define(PLATFORMS, ["vxworks_cpu32", "vxworks_ppc860", "vxworks_ppc603", - "vxworks_sparc", "vxworks_ppc750", "vxworks_simso"]). --include("ts.hrl"). - -%% takes an argument {Target_arch, Target_host} (e.g. {vxworks_ppc860, thorin}). -configure({Target_arch, Target_host}) -> - case variables({Target_arch, Target_host}) of - {ok, Vars} -> - ts_lib:subst_file("conf_vars.in", "conf_vars", Vars); - Error -> - Error - end. - -variables(Cross_spec) -> - run_tests(Cross_spec, tests(), []). - -run_tests(Cross_spec, [{Prompt, Tester}|Rest], Vars) -> - io:format("checking ~s... ", [Prompt]), - case catch Tester(Cross_spec, Vars) of - {'EXIT', Reason} -> - io:format("FAILED~nExit status: ~p~n", [Reason]), - {error, auto_conf_failed}; - {Result, NewVars} -> - io:format("~s~n", [lists:concat([Result])]), - run_tests(Cross_spec, Rest, NewVars) - end; -run_tests(_Cross_spec, [], Vars) -> - {ok, Vars}. - - -%%% The tests. - -tests() -> - [{"supported target architecture", fun target_architecture/2}, - {"cross target host to run tests on", fun target_host/2}, - {"CPU type", fun cpu/2}, - {"for cross-compiling gcc", fun find_gcc/2}, - {"for cross-linker", fun find_ld/2}, - {"for object extension", fun find_obj/2}, - {"for shared libraries extension", fun find_dll/2}, - {"for executables extension", fun find_exe/2}, - {"for make", fun find_make/2}]. - -target_architecture({Architecture, _Target_host}, Vars) -> - case lists:member(Architecture, ?PLATFORMS) of - true -> - {Architecture, [{host_os, os_type(Architecture)}, {host, Architecture}|Vars]}; - false -> - {"unsupported_platform", Vars} - end. - -target_host({_Architecture, Target_host}, Vars) -> - {Target_host, [{target_host, Target_host} | Vars]}. - -cpu({Arch, _Target_host}, Vars) -> - Cpu = processor(Arch), - {Cpu, [{host_cpu, Cpu}|Vars]}. - -find_gcc({Arch, _Target_host}, Vars) -> - Gcc = "cc" ++ gnu_suffix(Arch), - case os:find_executable(Gcc) of - false -> - {no, Vars}; - Path when is_list(Path) -> - Cflags = cflags(Arch), - {Path, [{'CC', Gcc}, - {'CFLAGS', Cflags}, - {'EI_CFLAGS', Cflags}, - {'ERTS_CFLAGS', Cflags}, - {'DEFS', ""}, - {'ERTS_LIBS', ""}, - {'LIBS', ""}, - {'SHLIB_CFLAGS', Cflags}, - {test_c_compiler, "{gnuc, undefined}"} | Vars]} - end. - -find_ld({Arch, _Target_host}, Vars) -> - Linker = "ld" ++ gnu_suffix(Arch), - case os:find_executable(Linker) of - false -> - {no, Vars}; - Path when is_list(Path) -> - {Path, [{'LD', Linker}, - {'CROSSLDFLAGS', ldflags(Arch)}, - {'SHLIB_EXTRACT_ALL', ""}, - {'SHLIB_LD', Linker}, - {'SHLIB_LDFLAGS', ""}, - {'SHLIB_LDLIBS', ""} | Vars]} - end. - -find_obj({Arch, _Target_host}, Vars) -> - Obj = obj_ext(Arch), - {Obj, [{obj, Obj}|Vars]}. - -find_dll({Arch, _Target_host}, Vars) -> - Dll = dll_ext(Arch), - {Dll, [{'SHLIB_SUFFIX', Dll}|Vars]}. - -find_exe({Arch, _Target_host}, Vars) -> - Exe = exe_ext(Arch), - {Exe, [{exe, Exe}|Vars]}. - -find_make(_, Vars) -> - {"make", [{make_command, "make"} | Vars]}. - -%%% some utility functions -gnu_suffix(Arch) -> - {_, _, _, _, Suffix, _Cpu, _Cflags, _} = cross_data(Arch), - Suffix. - -processor(Arch) -> - {_, _, _, _, _Suffix, Cpu, _Cflags, _} = cross_data(Arch), - Cpu. - -cflags(Arch) -> - {_, _, _, _, _Suffix, _Cpu, Cflags, _} = cross_data(Arch), - Cflags. - -ldflags(Arch) -> - {_, _, _, _, _Suffix, _Cpu, _Cflags, Ldflags} = cross_data(Arch), - Ldflags. - -os_type(Arch) -> - {Os_type, _, _, _, _, _, _, _} = cross_data(Arch), - Os_type. - -obj_ext(Arch) -> - {_, _, Obj, _, _, _, _, _} = cross_data(Arch), - Obj. - -dll_ext(Arch) -> - {_, _, _, Dll, _, _, _, _} = cross_data(Arch), - Dll. - -exe_ext(Arch) -> - {_, Exe, _, _, _, _, _, _} = cross_data(Arch), - Exe. - -cross_data(Arch) -> - case Arch of - "vxworks_cpu32" -> - {"VxWorks", "", ".o", ".eld", "68k", "cpu32", - "-DCPU=CPU32 -DVXWORKS -I$(WIND_BASE)/target/h -mnobitfield -fno-builtin -nostdinc -fvolatile -msoft-float", - "-r -d"}; - "vxworks_ppc860" -> - {"VxWorks", "", ".o", ".eld", "ppc", "ppc860", - "-DCPU=PPC860 -DVXWORKS -I$(WIND_BASE)/target/h -mcpu=860 -fno-builtin -fno-for-scope -msoft-float -D_GNU_TOOL -nostdinc", - "-r -d"}; - "vxworks_ppc603" -> - {"VxWorks", "", ".o", ".eld", "ppc", "ppc603", - "-DCPU=PPC603 -DVXWORKS -I$(WIND_BASE)/target/h -fno-builtin -fno-for-scope -D_GNU_TOOL -nostdinc", - "-r -d"}; - "vxworks_sparc" -> - %%% The Sparc Architecture is included for private use (i.e. not Tornado 1.0.1 compatible). - {"VxWorks", "", ".o", ".eld", "sparc", "sparc", - "-DCPU=SPARC -DVXWORKS -I/home/gandalf/bsproj/BS.2/UOS/vw/5.2/h -fno-builtin -nostdinc", - "-r -d"}; - "vxworks_ppc750" -> - {"VxWorks", "", ".o", ".eld", "ppc", "ppc604", - "-DCPU=PPC604 -DVXWORKS -DTOOL_FAMILY=gnu -DTOOL=gnu -I$(WIND_BASE)/target/h -fno-builtin -fno-for-scope -D_GNU_TOOL", - "-r -d"}; - "vxworks_simso" -> - {"VxWorks", "", ".o", ".eld", "simso", "simso", - "-DCPU=SIMSPARCSOLARIS -DVXWORKS -DTOOL_FAMILY=gnu -DTOOL=gnu -I$(WIND_BASE)/target/h -I$(WIND_GCC_INCLUDE) -fno-builtin -fno-for-scope -D_GNU_TOOL", - "-r -d"} - - end. diff --git a/lib/test_server/src/ts_benchmark.erl b/lib/test_server/src/ts_benchmark.erl new file mode 100644 index 0000000000..516d22fd2d --- /dev/null +++ b/lib/test_server/src/ts_benchmark.erl @@ -0,0 +1,91 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2012-2012. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% +%% +-module(ts_benchmark). + +-include_lib("common_test/include/ct_event.hrl"). +-include_lib("kernel/include/file.hrl"). +-include("ts.hrl"). + +-export([benchmarks/0, + run/3]). + +%% gen_event callbacks +-export([init/1, handle_event/2]). + +benchmarks() -> + {ok, Cwd} = file:get_cwd(), + Benches = filelib:wildcard( + filename:join([Cwd,"..","*_test","*_bench.spec"])), + [begin + Base = filename:basename(N), + list_to_atom(string:substr(Base,1,string:rstr(Base,"_")-1)) + end || N <- Benches]. + +run(Specs, Opts, Vars) -> + {ok, Cwd} = file:get_cwd(), + {{YY,MM,DD},{HH,Mi,SS}} = calendar:local_time(), + BName = lists:concat([YY,"_",MM,"_",DD,"T",HH,"_",Mi,"_",SS]), + BDir = filename:join([Cwd,BName]), + file:make_dir(BDir), + [ts_run:run(atom_to_list(Spec), + [{spec, [atom_to_list(Spec)++"_bench.spec"]}], + [{event_handler, {ts_benchmark, [Spec,BDir]}}|Opts],Vars) + || Spec <- Specs], + file:delete(filename:join(Cwd,"latest_benchmark")), + {ok,D} = file:open(filename:join(Cwd,"latest_benchmark"),[write]), + io:format(D,BDir,[]), + file:close(D). + + +%%%=================================================================== +%%% gen_event callbacks +%%%=================================================================== + +-record(state, { spec, suite, tc, stats_dir}). + +init([Spec,Dir]) -> + {ok, #state{ spec = Spec, stats_dir = Dir }}. + +handle_event(#event{name = tc_start, data = {Suite,Tc}}, State) -> + {ok,State#state{ suite = Suite, tc = Tc}}; +handle_event(#event{name = benchmark_data, data = Data}, State) -> + Spec = proplists:get_value(application, Data, State#state.spec), + Suite = proplists:get_value(suite, Data, State#state.suite), + Tc = proplists:get_value(name, Data, State#state.tc), + Value = proplists:get_value(value, Data), + {ok, D} = file:open(filename:join( + [State#state.stats_dir, + lists:concat([e(Spec),"-",e(Suite),"-", + e(Tc),".ebench"])]), + [append]), + io:format(D, "~p~n",[Value]), + file:close(D), + {ok, State}; +handle_event(_Event, State) -> + {ok, State}. + + +e(Atom) when is_atom(Atom) -> + Atom; +e(Str) when is_list(Str) -> + lists:map(fun($/) -> + $\\; + (C) -> + C + end,Str). diff --git a/lib/test_server/src/ts_erl_config.erl b/lib/test_server/src/ts_erl_config.erl index 43e56e1098..73abe86e11 100644 --- a/lib/test_server/src/ts_erl_config.erl +++ b/lib/test_server/src/ts_erl_config.erl @@ -160,7 +160,6 @@ system_include(Root, Vars) -> SysDir = case ts_lib:var(os, Vars) of "Windows" ++ _T -> "sys/win32"; - "VxWorks" -> "sys.vxworks"; _ -> "sys/unix" end, " -I" ++ quote(filename:nativename(filename:join([Root, "erts", "emulator", SysDir]))). @@ -176,9 +175,6 @@ erl_interface(Vars,OsType) -> {installed, _Root} -> {filename:join(Dir, "lib"), filename:join(Dir, "src")}; - {srctree, _Root, _Target} when OsType =:= vxworks -> - {filename:join(Dir, "lib"), - filename:join([Dir, "src"])}; {srctree, _Root, Target} -> {filename:join([Dir, "obj", Target]), filename:join([Dir, "src", Target])} @@ -218,7 +214,7 @@ erl_interface(Vars,OsType) -> {unix,_} -> "-lpthread"; _ -> - "" % VxWorks + "" end, [{erl_interface_libpath, quote(filename:nativename(LibPath))}, {erl_interface_sock_libs, sock_libraries(OsType)}, @@ -318,16 +314,12 @@ get_var(Key, Vars) -> sock_libraries({win32, _}) -> "ws2_32.lib"; sock_libraries({unix, _}) -> - ""; % Included in general libraries if needed. -sock_libraries(vxworks) -> - "". + "". % Included in general libraries if needed. link_library(LibName,{win32, _}) -> LibName ++ ".lib"; link_library(LibName,{unix, _}) -> "lib" ++ LibName ++ ".a"; -link_library(LibName,vxworks) -> - "lib" ++ LibName ++ ".a"; link_library(_LibName,_Other) -> exit({link_library, not_supported}). diff --git a/lib/test_server/src/ts_install.erl b/lib/test_server/src/ts_install.erl index caf00759e5..ba8952f10f 100644 --- a/lib/test_server/src/ts_install.erl +++ b/lib/test_server/src/ts_install.erl @@ -55,8 +55,7 @@ build_install(TargetSystem, Options) -> end. os_type({unix,_}=OsType) -> OsType; -os_type({win32,_}=OsType) -> OsType; -os_type(_Other) -> vxworks. +os_type({win32,_}=OsType) -> OsType. target_install(CrossVars) -> io:format("Cross installation detected, skipping configure and data_dir make~n"), @@ -76,7 +75,6 @@ target_install(CrossVars) -> %% Autoconf for various platforms. %% unix uses the configure script %% win32 uses ts_autoconf_win32 -%% VxWorks uses ts_autoconf_vxworks. autoconf(TargetSystem, XComp) -> case autoconf1(TargetSystem, XComp) of @@ -90,8 +88,6 @@ autoconf1({win32, _},[{cross,"no"}]) -> ts_autoconf_win32:configure(); autoconf1({unix, _},XCompFile) -> unix_autoconf(XCompFile); -autoconf1(Other,[{cross,"no"}]) -> - ts_autoconf_vxworks:configure(Other); autoconf1(_,_) -> io:format("cross compilation not supported for that this platform~n"), throw(cross_installation_failed). diff --git a/lib/test_server/src/ts_lib.erl b/lib/test_server/src/ts_lib.erl index ea97361bd3..d9a699ca9f 100644 --- a/lib/test_server/src/ts_lib.erl +++ b/lib/test_server/src/ts_lib.erl @@ -25,9 +25,8 @@ -compile({no_auto_import,[error/1]}). -export([error/1, var/2, erlang_type/0, erlang_type/1, - initial_capital/1, interesting_logs/1, - specs/1, suites/2, last_test/1, - force_write_file/2, force_delete/1, + initial_capital/1, + specs/1, suites/2, subst_file/3, subst/2, print_data/1, make_non_erlang/2, maybe_atom_to_list/1, progress/4 @@ -91,25 +90,18 @@ initial_capital([C|Rest]) when $a =< C, C =< $z -> initial_capital(String) -> String. -%% Returns a list of the "interesting logs" in a directory, -%% i.e. those that correspond to spec files. - -interesting_logs(Dir) -> - Logs = filelib:wildcard(filename:join(Dir, [$*|?logdir_ext])), - Interesting = - case specs(Dir) of - [] -> - Logs; - Specs0 -> - Specs = ordsets:from_list(Specs0), - [L || L <- Logs, ordsets:is_element(filename_to_atom(L), Specs)] - end, - sort_tests(Interesting). - specs(Dir) -> Specs = filelib:wildcard(filename:join([filename:dirname(Dir), - "*_test", "*.{dyn,}spec"])), - sort_tests([filename_to_atom(Name) || Name <- Specs]). + "*_test", "*.{dyn,}spec"])), + % Filter away all spec which end with _bench.spec + NoBench = fun(SpecName) -> + case lists:reverse(SpecName) of + "ceps.hcneb_"++_ -> false; + _ -> true + end + end, + + sort_tests([filename_to_atom(Name) || Name <- Specs, NoBench(Name)]). suites(Dir, Spec) -> Glob=filename:join([filename:dirname(Dir), Spec++"_test", @@ -157,42 +149,6 @@ suite_order(mnesia) -> 44; suite_order(system) -> 999; %% IMPORTANT: system SHOULD always be last! suite_order(_) -> 200. -last_test(Dir) -> - last_test(filelib:wildcard(filename:join(Dir, "run.[1-2]*")), false). - -last_test([Run|Rest], false) -> - last_test(Rest, Run); -last_test([Run|Rest], Latest) when Run > Latest -> - last_test(Rest, Run); -last_test([_|Rest], Latest) -> - last_test(Rest, Latest); -last_test([], Latest) -> - Latest. - -%% Do the utmost to ensure that the file is written, by deleting or -%% renaming an old file with the same name. - -force_write_file(Name, Contents) -> - force_delete(Name), - file:write_file(Name, Contents). - -force_delete(Name) -> - case file:delete(Name) of - {error, eacces} -> - force_rename(Name, Name ++ ".old.", 0); - Other -> - Other - end. - -force_rename(From, To, Number) -> - Dest = [To|integer_to_list(Number)], - case file:read_file_info(Dest) of - {ok, _} -> - force_rename(From, To, Number+1); - {error, _} -> - file:rename(From, Dest) - end. - %% Substitute all occurrences of @var@ in the In file, using %% the list of variables in Vars, producing the output file Out. %% Returns: ok | {error, Reason} diff --git a/lib/test_server/src/ts_reports.erl b/lib/test_server/src/ts_reports.erl deleted file mode 100644 index f981a77ae4..0000000000 --- a/lib/test_server/src/ts_reports.erl +++ /dev/null @@ -1,545 +0,0 @@ -%% -%% %CopyrightBegin% -%% -%% Copyright Ericsson AB 1997-2010. All Rights Reserved. -%% -%% The contents of this file are subject to the Erlang Public License, -%% Version 1.1, (the "License"); you may not use this file except in -%% compliance with the License. You should have received a copy of the -%% Erlang Public License along with this software. If not, it can be -%% retrieved online at http://www.erlang.org/. -%% -%% Software distributed under the License is distributed on an "AS IS" -%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See -%% the License for the specific language governing rights and limitations -%% under the License. -%% -%% %CopyrightEnd% -%% - -%%% Purpose : Produces reports in HTML from the outcome of test suite runs. - --module(ts_reports). - --export([make_index/0, make_master_index/2, make_progress_index/2]). --export([count_cases/1, year/0, current_time/0]). - --include_lib("kernel/include/file.hrl"). --include("ts.hrl"). - --compile({no_auto_import,[error/1]}). - --import(filename, [basename/1, rootname/1]). --import(ts_lib, [error/1]). - - -%% Make master index page which points out index pages for all platforms. - -make_master_index(Dir, Vars) -> - IndexName = filename:join(Dir, "index.html"), - {ok, Index0} = make_master_index1(directories(Dir), master_header(Vars)), - Index = [Index0|master_footer()], - io:put_chars("Updating " ++ IndexName ++ "... "), - ok = ts_lib:force_write_file(IndexName, Index), - io:put_chars("done\n"). - -make_master_index1([Dir|Rest], Result) -> - NewResult = - case catch read_variables(Dir) of - {'EXIT',{{bad_installation,Reason},_}} -> - io:put_chars("Failed to read " ++ filename:join(Dir,?variables)++ - ": " ++ Reason ++ " - Ignoring this directory\n"), - Result; - Vars -> - Platform = ts_lib:var(platform_label, Vars), - case make_index(Dir, Vars, false) of - {ok, Summary} -> - make_master_index(Platform, Dir, Summary, Result); - {error, _} -> - Result - end - end, - make_master_index1(Rest, NewResult); -make_master_index1([], Result) -> - {ok, Result}. - -make_progress_index(Dir, Vars) -> - IndexName = filename:join(Dir, "index.html"), - io:put_chars("Updating " ++ IndexName ++ "... "), - Index0=progress_header(Vars), - ts_lib:force_delete(IndexName), - Dirs=find_progress_runs(Dir), - Index1=[Index0|make_progress_links(Dirs, [])], - IndexF=[Index1|progress_footer()], - ok = ts_lib:force_write_file(IndexName, IndexF), - io:put_chars("done\n"). - -find_progress_runs(Dir) -> - case file:list_dir(Dir) of - {ok, Dirs0} -> - Dirs1= [filename:join(Dir,X) || X <- Dirs0, - filelib:is_dir(filename:join(Dir,X))], - lists:sort(Dirs1); - _ -> - [] - end. - -name_from_vars(Dir, Platform) -> - VarFile=filename:join([Dir, Platform, "variables"]), - case file:consult(VarFile) of - {ok, Vars} -> - ts_lib:var(platform_id, Vars); - _Other -> - Platform - end. - -make_progress_links([], Acc) -> - Acc; -make_progress_links([RDir|Rest], Acc) -> - Dir=filename:basename(RDir), - Platforms=[filename:basename(X) || - X <- find_progress_runs(RDir)], - PlatformLinks=["<A HREF=\""++filename:join([Dir,X,"index.html"]) - ++"\">"++name_from_vars(RDir, X)++"</A><BR>" || - X <- Platforms], - LinkName=Dir++"/index.html", - Link = - [ - "<TR valign=top>\n", - "<TD><A HREF=\"", LinkName, "\">", Dir, "</A></TD>", "\n", - "<TD>", PlatformLinks, "</TD>", "\n" - ], - make_progress_links(Rest, [Link|Acc]). - -read_variables(Dir) -> - case file:consult(filename:join(Dir, ?variables)) of - {ok, Vars} -> Vars; - {error, Reason} -> - erlang:error({bad_installation,file:format_error(Reason)}, [Dir]) - end. - -make_master_index(Platform, Dirname, {Succ, Fail, UserSkip,AutoSkip}, Result) -> - Link = filename:join(filename:basename(Dirname), "index.html"), - FailStr = - if Fail > 0 -> - ["<FONT color=\"red\">", - integer_to_list(Fail),"</FONT>"]; - true -> - integer_to_list(Fail) - end, - AutoSkipStr = - if AutoSkip > 0 -> - ["<FONT color=\"brown\">", - integer_to_list(AutoSkip),"</FONT>"]; - true -> integer_to_list(AutoSkip) - end, - [Result, - "<TR valign=top>\n", - "<TD><A HREF=\"", Link, "\">", Platform, "</A></TD>", "\n", - make_row(integer_to_list(Succ), false), - make_row(FailStr, false), - make_row(integer_to_list(UserSkip), false), - make_row(AutoSkipStr, false), - "</TR>\n"]. - -%% Make index page which points out individual test suites for a single platform. - -make_index() -> - {ok, Pwd} = file:get_cwd(), - Vars = read_variables(Pwd), - make_index(Pwd, Vars, true). - -make_index(Dir, Vars, IncludeLast) -> - IndexName = filename:absname("index.html", Dir), - io:put_chars("Updating " ++ IndexName ++ "... "), - case catch make_index1(Dir, IndexName, Vars, IncludeLast) of - {'EXIT', Reason} -> - io:put_chars("CRASHED!\n"), - io:format("~p~n", [Reason]), - {error, Reason}; - {error, Reason} -> - io:put_chars("FAILED\n"), - io:format("~p~n", [Reason]), - {error, Reason}; - {ok, Summary} -> - io:put_chars("done\n"), - {ok, Summary}; - Err -> - io:format("Unknown internal error. Please report.\n(Err: ~p, ID: 1)", - [Err]), - {error, Err} - end. - -make_index1(Dir, IndexName, Vars, IncludeLast) -> - Logs0 = ts_lib:interesting_logs(Dir), - Logs = - case IncludeLast of - true -> add_last_name(Logs0); - false -> Logs0 - end, - {ok, {Index0, Summary}} = make_index(Logs, header(Vars), 0, 0, 0, 0, 0), - Index = [Index0|footer()], - case ts_lib:force_write_file(IndexName, Index) of - ok -> - {ok, Summary}; - {error, Reason} -> - error({index_write_error, Reason}) - end. - -make_index([Name|Rest], Result, TotSucc, TotFail, UserSkip, AutoSkip, TotNotBuilt) -> - case ts_lib:last_test(Name) of - false -> - %% Silently skip. - make_index(Rest, Result, TotSucc, TotFail, UserSkip, AutoSkip, TotNotBuilt); - Last -> - case count_cases(Last) of - {Succ, Fail, USkip, ASkip} -> - Cov = - case file:read_file(filename:join(Last,?cover_total)) of - {ok,Bin} -> - TotCoverage = binary_to_term(Bin), - io_lib:format("~w %",[TotCoverage]); - _error -> - "" - end, - Link = filename:join(basename(Name), basename(Last)), - JustTheName = rootname(basename(Name)), - NotBuilt = not_built(JustTheName), - NewResult = [Result, make_index1(JustTheName, - Link, Succ, Fail, USkip, ASkip, - NotBuilt, Cov, false)], - make_index(Rest, NewResult, TotSucc+Succ, TotFail+Fail, - UserSkip+USkip, AutoSkip+ASkip, TotNotBuilt+NotBuilt); - error -> - make_index(Rest, Result, TotSucc, TotFail, UserSkip, AutoSkip, - TotNotBuilt) - end - end; -make_index([], Result, TotSucc, TotFail, UserSkip, AutoSkip, TotNotBuilt) -> - {ok, {[Result|make_index1("Total", no_link, - TotSucc, TotFail, UserSkip, AutoSkip, - TotNotBuilt, "", true)], - {TotSucc, TotFail, UserSkip, AutoSkip}}}. - -make_index1(SuiteName, Link, Success, Fail, UserSkip, AutoSkip, NotBuilt, Coverage, Bold) -> - Name = test_suite_name(SuiteName), - FailStr = - if Fail > 0 -> - ["<FONT color=\"red\">", - integer_to_list(Fail),"</FONT>"]; - true -> - integer_to_list(Fail) - end, - AutoSkipStr = - if AutoSkip > 0 -> - ["<FONT color=\"brown\">", - integer_to_list(AutoSkip),"</FONT>"]; - true -> integer_to_list(AutoSkip) - end, - ["<TR valign=top>\n", - "<TD>", - case Link of - no_link -> - ["<B>", Name|"</B>"]; - _Other -> - CrashDumpName = SuiteName ++ "_erl_crash.dump", - CrashDumpLink = - case filelib:is_file(CrashDumpName) of - true -> - [" <A HREF=\"", CrashDumpName, - "\">(CrashDump)</A>"]; - false -> - "" - end, - LogFile = filename:join(Link, ?suitelog_name ++ ".html"), - ["<A HREF=\"", LogFile, "\">", Name, "</A>\n", CrashDumpLink, - "</TD>\n"] - end, - make_row(integer_to_list(Success), Bold), - make_row(FailStr, Bold), - make_row(integer_to_list(UserSkip), Bold), - make_row(AutoSkipStr, Bold), - make_row(integer_to_list(NotBuilt), Bold), - make_row(Coverage, Bold), - "</TR>\n"]. - -make_row(Row, true) -> - ["<TD ALIGN=right><B>", Row|"</B></TD>"]; -make_row(Row, false) -> - ["<TD ALIGN=right>", Row|"</TD>"]. - -not_built(BaseName) -> - Dir = filename:join("..", BaseName++"_test"), - Erl = length(filelib:wildcard(filename:join(Dir,"*_SUITE.erl"))), - Beam = length(filelib:wildcard(filename:join(Dir,"*_SUITE.beam"))), - Erl-Beam. - - -%% Add the log file directory for the very last test run (according to -%% last_name). - -add_last_name(Logs) -> - case file:read_file("last_name") of - {ok, Bin} -> - Name = filename:dirname(lib:nonl(binary_to_list(Bin))), - case lists:member(Name, Logs) of - true -> Logs; - false -> [Name|Logs] - end; - _ -> - Logs - end. - -term_to_text(Term) -> - lists:flatten(io_lib:format("~p.\n", [Term])). - -test_suite_name(Name) -> - ts_lib:initial_capital(Name) ++ " suite". - -directories(Dir) -> - {ok, Files} = file:list_dir(Dir), - [filename:join(Dir, X) || X <- Files, - filelib:is_dir(filename:join(Dir, X))]. - - -%%% Headers and footers. - -header(Vars) -> - Platform = ts_lib:var(platform_id, Vars), - ["<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 3.2 Final//EN\">\n" - "<!-- autogenerated by '"++atom_to_list(?MODULE)++"'. -->\n" - "<HTML>\n", - "<HEAD>\n", - "<TITLE>Test Results for ", Platform, "</TITLE>\n", - "</HEAD>\n", - - body_tag(), - - "<!-- ---- DOCUMENT TITLE ---- -->\n", - - "<CENTER>\n", - "<H1>Test Results for ", Platform, "</H1>\n", - "</CENTER>\n", - - "<!-- ---- CONTENT ---- -->\n", - "<CENTER>\n", - - "<TABLE border=3 cellpadding=5>\n", - "<th><B>Family</B></th>\n", - "<th>Successful</th>\n", - "<th>Failed</th>\n", - "<th>User Skipped</th>\n" - "<th>Auto Skipped</th>\n" - "<th>Missing Suites</th>\n" - "<th>Coverage</th>\n" - "\n"]. - -footer() -> - ["</TABLE>\n" - "</CENTER>\n" - "<P><CENTER>\n" - "<HR>\n" - "<P><FONT SIZE=-1>\n" - "Copyright © ", year(), - " <A HREF=\"http://erlang.ericsson.se\">Open Telecom Platform</A><BR>\n" - "Updated: <!date>", current_time(), "<!/date><BR>\n" - "</FONT>\n" - "</CENTER>\n" - "</body>\n" - "</HTML>\n"]. - -progress_header(Vars) -> - Release = ts_lib:var(erl_release, Vars), - ["<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 3.2 Final//EN\">\n" - "<!-- autogenerated by '"++atom_to_list(?MODULE)++"'. -->\n" - "<HTML>\n", - "<HEAD>\n", - "<TITLE>", Release, " Progress Test Results</TITLE>\n", - "</HEAD>\n", - - body_tag(), - - "<!-- ---- DOCUMENT TITLE ---- -->\n", - - "<CENTER>\n", - "<H1>", Release, " Progress Test Results</H1>\n", - "<TABLE border=3 cellpadding=5>\n", - "<th><b>Test Run</b></th><th>Platforms</th>\n"]. - -progress_footer() -> - ["</TABLE>\n", - "</CENTER>\n", - "<P><CENTER>\n", - "<HR>\n", - "<P><FONT SIZE=-1>\n", - "Copyright © ", year(), - " <A HREF=\"http://erlang.ericsson.se\">Open Telecom Platform</A><BR>\n", - "Updated: <!date>", current_time(), "<!/date><BR>\n", - "</FONT>\n", - "</CENTER>\n", - "</body>\n", - "</HTML>\n"]. - -master_header(Vars) -> - Release = ts_lib:var(erl_release, Vars), - Vsn = erlang:system_info(version), - ["<!DOCTYPE HTML PUBLIC \"-//W3C//DTD HTML 3.2 Final//EN\">\n" - "<!-- autogenerated by '"++atom_to_list(?MODULE)++"'. -->\n" - "<HTML>\n", - "<HEAD>\n", - "<TITLE>", Release, " Test Results (", Vsn, ")</TITLE>\n", - "</HEAD>\n", - - body_tag(), - - "<!-- ---- DOCUMENT TITLE ---- -->\n", - - "<CENTER>\n", - "<H1>", Release, " Test Results (", Vsn, ")</H1>\n", - "</CENTER>\n", - - "<!-- ---- CONTENT ---- -->\n", - - "<CENTER>\n", - - "<TABLE border=3 cellpadding=5>\n", - "<th><b>Platform</b></th>\n", - "<th>Successful</th>\n", - "<th>Failed</th>\n", - "<th>User Skipped</th>\n" - "<th>Auto Skipped</th>\n" - "\n"]. - -master_footer() -> - ["</TABLE>\n", - "</CENTER>\n", - "<P><CENTER>\n", - "<HR>\n", - "<P><FONT SIZE=-1>\n", - "Copyright © ", year(), - " <A HREF=\"http://erlang.ericsson.se\">Open Telecom Platform</A><BR>\n", - "Updated: <!date>", current_time(), "<!/date><BR>\n", - "</FONT>\n", - "</CENTER>\n", - "</body>\n", - "</HTML>\n"]. - -body_tag() -> - "<body bgcolor=\"#FFFFFF\" text=\"#000000\" link=\"#0000FF\"" - "vlink=\"#800080\" alink=\"#FF0000\">". - -year() -> - {Y, _, _} = date(), - integer_to_list(Y). - -current_time() -> - {{Y, Mon, D}, {H, Min, S}} = calendar:local_time(), - Weekday = weekday(calendar:day_of_the_week(Y, Mon, D)), - lists:flatten(io_lib:format("~s ~s ~p ~2.2.0w:~2.2.0w:~2.2.0w ~w", - [Weekday, month(Mon), D, H, Min, S, Y])). - -weekday(1) -> "Mon"; -weekday(2) -> "Tue"; -weekday(3) -> "Wed"; -weekday(4) -> "Thu"; -weekday(5) -> "Fri"; -weekday(6) -> "Sat"; -weekday(7) -> "Sun". - -month(1) -> "Jan"; -month(2) -> "Feb"; -month(3) -> "Mar"; -month(4) -> "Apr"; -month(5) -> "May"; -month(6) -> "Jun"; -month(7) -> "Jul"; -month(8) -> "Aug"; -month(9) -> "Sep"; -month(10) -> "Oct"; -month(11) -> "Nov"; -month(12) -> "Dec". - -%% Count test cases in the given directory (a directory of the type -%% run.1997-08-04_09.58.52). - -count_cases(Dir) -> - SumFile = filename:join(Dir, ?run_summary), - case read_summary(SumFile, [summary]) of - {ok, [{Succ,Fail,Skip}]} -> - {Succ,Fail,Skip,0}; - {ok, [Summary]} -> - Summary; - {error, _} -> - LogFile = filename:join(Dir, ?suitelog_name), - case file:read_file(LogFile) of - {ok, Bin} -> - Summary = count_cases1(binary_to_list(Bin), {0, 0, 0, 0}), - write_summary(SumFile, Summary), - Summary; - {error, _Reason} -> - io:format("\nFailed to read ~p (skipped)\n", [LogFile]), - error - end - end. - -write_summary(Name, Summary) -> - File = [term_to_text({summary, Summary})], - ts_lib:force_write_file(Name, File). - -% XXX: This function doesn't do what the writer expect. It can't handle -% the case if there are several different keys and I had to add a special -% case for the empty file. The caller also expect just one tuple as -% a result so this function is written way to general for no reason. -% But it works sort of. /kgb - -read_summary(Name, Keys) -> - case file:consult(Name) of - {ok, []} -> - {error, "Empty summary file"}; - {ok, Terms} -> - {ok, lists:map(fun(Key) -> {value, {_, Value}} = - lists:keysearch(Key, 1, Terms), - Value end, - Keys)}; - {error, Reason} -> - {error, Reason} - end. - -count_cases1("=failed" ++ Rest, {Success, _Fail, UserSkip,AutoSkip}) -> - {NextLine, Count} = get_number(Rest), - count_cases1(NextLine, {Success, Count, UserSkip,AutoSkip}); -count_cases1("=successful" ++ Rest, {_Success, Fail, UserSkip,AutoSkip}) -> - {NextLine, Count} = get_number(Rest), - count_cases1(NextLine, {Count, Fail, UserSkip,AutoSkip}); -count_cases1("=skipped" ++ Rest, {Success, Fail, _UserSkip,AutoSkip}) -> - {NextLine, Count} = get_number(Rest), - count_cases1(NextLine, {Success, Fail, Count,AutoSkip}); -count_cases1("=user_skipped" ++ Rest, {Success, Fail, _UserSkip,AutoSkip}) -> - {NextLine, Count} = get_number(Rest), - count_cases1(NextLine, {Success, Fail, Count,AutoSkip}); -count_cases1("=auto_skipped" ++ Rest, {Success, Fail, UserSkip,_AutoSkip}) -> - {NextLine, Count} = get_number(Rest), - count_cases1(NextLine, {Success, Fail, UserSkip,Count}); -count_cases1([], Counters) -> - Counters; -count_cases1(Other, Counters) -> - count_cases1(skip_to_nl(Other), Counters). - -get_number([$\s|Rest]) -> - get_number(Rest); -get_number([Digit|Rest]) when $0 =< Digit, Digit =< $9 -> - get_number(Rest, Digit-$0). - -get_number([Digit|Rest], Acc) when $0 =< Digit, Digit =< $9 -> - get_number(Rest, Acc*10+Digit-$0); -get_number([$\n|Rest], Acc) -> - {Rest, Acc}; -get_number([_|Rest], Acc) -> - get_number(Rest, Acc). - -skip_to_nl([$\n|Rest]) -> - Rest; -skip_to_nl([_|Rest]) -> - skip_to_nl(Rest); -skip_to_nl([]) -> - []. diff --git a/lib/test_server/src/ts_run.erl b/lib/test_server/src/ts_run.erl index 95e3c08d5b..741dd483f5 100644 --- a/lib/test_server/src/ts_run.erl +++ b/lib/test_server/src/ts_run.erl @@ -21,7 +21,7 @@ -module(ts_run). --export([run/4]). +-export([run/4,ct_run_test/2]). -define(DEFAULT_MAKE_TIMETRAP_MINUTES, 60). -define(DEFAULT_UNMAKE_TIMETRAP_MINUTES, 15). @@ -87,6 +87,24 @@ execute([Hook|Rest], Vars0, Spec0, St0) -> execute([], Vars, Spec, St) -> {ok, Vars, Spec, St}. +%% Wrapper to run tests using ct:run_test/1 and handle any errors. + +ct_run_test(Dir, CommonTestArgs) -> + try + ok = file:set_cwd(Dir), + case ct:run_test(CommonTestArgs) of + {_,_,_} -> + ok; + {error,Error} -> + io:format("ERROR: ~P\n", [Error,20]); + Other -> + io:format("~P\n", [Other,20]) + end + catch + _:Crash -> + io:format("CRASH: ~P\n", [Crash,20]) + end. + %% %% Deletes File from Files when File is on the form .../<SUITE>_data/<file> %% when all of <SUITE> has been skipped in Spec, i.e. there @@ -157,7 +175,6 @@ get_config_files() -> [TSConfig | case os:type() of {unix,_} -> ["ts.unix.config"]; {win32,_} -> ["ts.win32.config"]; - vxworks -> ["ts.vxworks.config"]; _ -> [] end]. @@ -231,8 +248,7 @@ make_command(Vars, Spec, State) -> " -boot start_sasl -sasl errlog_type error", " -pz \"",Cwd,"\"", " -ct_test_vars ",TestVars, - " -eval \"file:set_cwd(\\\"",TestDir,"\\\")\" " - " -eval \"ct:run_test(", + " -eval \"ts_run:ct_run_test(\\\"",TestDir,"\\\", ", backslashify(lists:flatten(State#state.test_server_args)),")\"" " ", ExtraArgs], @@ -329,8 +345,7 @@ start_xterm(Command) -> path_separator() -> case os:type() of {win32, _} -> ";"; - {unix, _} -> ":"; - vxworks -> ":" + {unix, _} -> ":" end. @@ -353,7 +368,7 @@ make_common_test_args(Args0, Options0, _Vars) -> io:format("No cover file found for ~p~n",[App]), []; {value,{cover,_App,File,_Analyse}} -> - [{cover,to_list(File)}]; + [{cover,to_list(File)},{cover_stop,false}]; false -> [] end, @@ -365,13 +380,7 @@ make_common_test_args(Args0, Options0, _Vars) -> [{logdir,"../test_server"}] end, - TimeTrap = case test_server:timetrap_scale_factor() of - 1 -> - []; - Scale -> - [{multiply_timetraps, Scale}, - {scale_timetraps, true}] - end, + TimeTrap = [{scale_timetraps, true}], {ConfigPath, Options} = case {os:getenv("TEST_CONFIG_PATH"), diff --git a/lib/test_server/src/ts_selftest.erl b/lib/test_server/src/ts_selftest.erl deleted file mode 100644 index 655aa4bab3..0000000000 --- a/lib/test_server/src/ts_selftest.erl +++ /dev/null @@ -1,120 +0,0 @@ -%% -%% %CopyrightBegin% -%% -%% Copyright Ericsson AB 1997-2009. All Rights Reserved. -%% -%% The contents of this file are subject to the Erlang Public License, -%% Version 1.1, (the "License"); you may not use this file except in -%% compliance with the License. You should have received a copy of the -%% Erlang Public License along with this software. If not, it can be -%% retrieved online at http://www.erlang.org/. -%% -%% Software distributed under the License is distributed on an "AS IS" -%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See -%% the License for the specific language governing rights and limitations -%% under the License. -%% -%% %CopyrightEnd% -%% --module(ts_selftest). --export([selftest/0]). - -selftest() -> - case node() of - nonode@nohost -> - io:format("Sorry, you have to start this node distributed.~n"), - exit({error, node_not_distributed}); - _ -> - ok - end, - case catch ts:tests(test_server) of - {'EXIT', _} -> - io:format("Test Server self test not availiable."); - Other -> - selftest1() - end. - -selftest1() -> - % Batch starts - io:format("Selftest #1: Whole spec, batch mode:~n"), - io:format("------------------------------------~n"), - ts:run(test_server, [batch]), - ok=check_result(1, "test_server.logs", 2), - - io:format("Selftest #2: One module, batch mode:~n"), - io:format("------------------------------------~n"), - ts:run(test_server, test_server_SUITE, [batch]), - ok=check_result(2, "test_server_SUITE.logs", 2), - - io:format("Selftest #3: One testcase, batch mode:~n"), - io:format("--------------------------------------~n"), - ts:run(test_server, test_server_SUITE, msgs, [batch]), - ok=check_result(3, "test_server_SUITE.logs", 0), - - % Interactive starts - io:format("Selftest #4: Whole spec, interactive mode:~n"), - io:format("------------------------------------------~n"), - ts:run(test_server), - kill_test_server(), - ok=check_result(4, "test_server.logs", 2), - - io:format("Selftest #5: One module, interactive mode:~n"), - io:format("------------------------------------------~n"), - ts:run(test_server, test_server_SUITE), - kill_test_server(), - ok=check_result(5, "test_server_SUITE.logs", 2), - - io:format("Selftest #6: One testcase, interactive mode:~n"), - io:format("--------------------------------------------~n"), - ts:run(test_server, test_server_SUITE, msgs), - kill_test_server(), - ok=check_result(6, "test_server_SUITE.logs", 0), - - ok. - -check_result(Test, TDir, ExpSkip) -> - Dir=ts_lib:last_test(TDir), - {Total, Failed, Skipped}=ts_reports:count_cases(Dir), - io:format("Selftest #~p:",[Test]), - case {Total, Failed, Skipped} of - {_, 0, ExpSkip} -> % 2 test cases should be skipped. - io:format("All ok.~n~n"), - ok; - {_, _, _} -> - io:format("Not completely successful.~n~n"), - error - end. - - -%% Wait for test server to get started. -kill_test_server() -> - Node=list_to_atom("test_server@"++atom_to_list(hostname())), - net_adm:ping(Node), - case whereis(test_server_ctrl) of - undefined -> - kill_test_server(); - Pid -> - kill_test_server(0, Pid) - end. - -%% Wait for test server to finish. -kill_test_server(30, Pid) -> - exit(self(), test_server_is_dead); -kill_test_server(Num, Pid) -> - case whereis(test_server_ctrl) of - undefined -> - slave:stop(node(Pid)); - Pid -> - receive - after - 1000 -> - kill_test_server(Num+1, Pid) - end - end. - - -hostname() -> - list_to_atom(from($@, atom_to_list(node()))). -from(H, [H | T]) -> T; -from(H, [_ | T]) -> from(H, T); -from(H, []) -> []. diff --git a/lib/test_server/src/vxworks_client.erl b/lib/test_server/src/vxworks_client.erl deleted file mode 100644 index ca65eca02a..0000000000 --- a/lib/test_server/src/vxworks_client.erl +++ /dev/null @@ -1,243 +0,0 @@ -%% -%% %CopyrightBegin% -%% -%% Copyright Ericsson AB 2002-2009. All Rights Reserved. -%% -%% The contents of this file are subject to the Erlang Public License, -%% Version 1.1, (the "License"); you may not use this file except in -%% compliance with the License. You should have received a copy of the -%% Erlang Public License along with this software. If not, it can be -%% retrieved online at http://www.erlang.org/. -%% -%% Software distributed under the License is distributed on an "AS IS" -%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See -%% the License for the specific language governing rights and limitations -%% under the License. -%% -%% %CopyrightEnd% -%% --module(vxworks_client). - --export([open/1, close/1, send_data/2, send_data/3, send_data_wait_for_close/2, reboot/1]). --export([init/2]). - --include("ts.hrl"). - - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%%% This is a client talking to a test server daemon on a VxWorks card. -%%% -%%% User interface: -%%% -%%% open/1 -%%% Start a client and establish the connection with the test server daemon -%%% -%%% send_data/2 -%%% Send data/command to the test server daemon, don't wait for any return -%%% -%%% send_data/3 -%%% Send data/command to the test server daemon and wait for the given -%%% return value. -%%% -%%% send_data_wait_for_close/2 -%%% Send data/command to the test server daemon and wait for the daemon to -%%% close the connection. -%%% -%%% close/1 -%%% Close the client. -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - - -%% -%% User interface -%% - -reboot(Target) -> - {ok, {_,_,_,_,_,[Addr|_]}} = inet:gethostbyname(Target), - Fun = fun({ok, Socket}) -> - gen_tcp:send(Socket, "q\n"), - receive - {tcp_closed, Socket} -> - gen_tcp:close(Socket), - {ok, socket_closed} - after 5000 -> - exit({timeout, tryagain}) - end - end, - io:format("Stopping (rebooting) ~p ",[Target]), - case fun_target(Addr, Fun) of - {ok, socket_closed} -> - ok; - _Else -> - io:format("No contact with ts daemon - exiting ...~n"), - exit({stop, no_ts_daemon_contact}) - end. - - -%% open(Target) -> {ok,Client} | {error, Reason} -open(Target) -> - {ok, {_,_,_,_,_,[Addr|_]}} = inet:gethostbyname(Target), - Fun = fun({ok, Socket}) -> - P = spawn(?MODULE,init,[Target,Socket]), - inet_tcp:controlling_process(Socket,P), - {ok,P} - end, - case fun_target(Addr,Fun) of - {ok, Pid} -> - {ok, Pid}; - {error,Reason} -> - {error, Reason} - end. - -%% send_data(Client,Data) -> ok -send_data(Pid,Data) -> - Pid ! {send_data,Data++"\n"}, - ok. - -%% send_data(Client,Data,ExpectedReturn) -> {ok,ExpectedReturn} | {error,Reason} -send_data(Pid,Data,Return) -> - Pid ! {send_data,Data++"\n",Return,self()}, - receive {Pid,Result} -> Result end. - -%% send_data_wait_for_close(Client,Data) -> ok | {error,Reason} -send_data_wait_for_close(Pid,Data) -> - send_data(Pid,Data,tcp_closed). - -%% close(Client) -> ok -close(Pid) -> - Pid ! close, - ok. - - -%% -%% Internal -%% - -init(Target,Socket) -> - process_flag(trap_exit,true), - loop(Target,Socket). - -loop(Target,Socket) -> - receive - {send_data,Data} -> - %% io:format("vx client sending: ~p~n", [Data]), - gen_tcp:send(Socket, Data), - loop(Socket,Target); - {send_data,Data,tcp_closed,From} -> - %% io:format("vx client sending: ~p~n", [Data]), - gen_tcp:send(Socket, Data), - receive - {tcp_closed, Socket} -> - From ! {self(),ok} - after 5000 -> - From ! {self(),{error,timeout}} - end, - closed(Socket,normal); - {send_data,Data,Return,From} -> - %% io:format("vx client sending: ~p~n", [Data]), - gen_tcp:send(Socket, Data), - case receive_line(Socket,[],Return,200) of - {tcp_closed, Socket} -> - From ! {self(),{error,{socket_closed,Target}}}, - closed(Socket,{socket_closed,Target}); - {tcp,Socket,_Rest} -> - From ! {self(),{ok,Data}}, - got_data(Target,Socket,Data); - error -> - From ! {self(),{error,{catatonic,Target}}} - end; - close -> - closed(Socket,normal); - {tcp_closed, Socket} -> - closed(Socket,{socket_closed,Target}); - {tcp,Socket,Data} -> - got_data(Target,Socket,Data) - end. - - - -closed(Socket,Reason) -> - gen_tcp:close(Socket), - exit(Reason). - -got_data(Target,Socket,Data) -> - if is_atom(Target) -> - io:format("~w: ~s",[Target,uncr(Data)]); - true -> - io:format("~s: ~s",[Target,uncr(Data)]) - end, - loop(Target,Socket). - -uncr([]) -> - []; -uncr([$\r | T]) -> - uncr(T); -uncr([H | T]) -> - [H | uncr(T)]. - -strip_line(Line) -> - RPos = string:rchr(Line, $\n), - string:substr(Line,RPos+1). - -maybe_done_receive(Socket,Ack,Match,C) -> - case string:str(Ack,Match) of - 0 -> - receive_line(Socket,strip_line(Ack),Match,C); - _ -> - {tcp,Socket,strip_line(Ack)} - end. - - -receive_line(_Socket,_Ack,_Match,0) -> - error; -receive_line(Socket,Ack,Match,Counter) -> - receive - {tcp_closed, Socket} -> - {tcp_closed, Socket}; - {tcp,Socket,Data} -> - NewAck = Ack ++ Data, - case {string:str(NewAck,"\r") > 0, - string:str(NewAck,"\n") > 0} of - {true,_} -> - maybe_done_receive(Socket,NewAck,Match,Counter-1); - {_,true} -> - maybe_done_receive(Socket,NewAck,Match,Counter-1); - _ -> - receive_line(Socket,NewAck,Match,Counter) - end - after 20000 -> - error - end. - - -%% Misc functions -fun_target(Addr, Fun) -> - io:format("["), - fun_target(Addr, Fun, 60). %Vx-cards need plenty of time. - -fun_target(_Addr, _Fun, 0) -> - io:format(" no contact with ts daemon]~n"), - {error,failed_to_connect}; -fun_target(Addr, Fun, Tries_left) -> - receive after 1 -> ok end, - case do_connect(Addr, Fun) of - {ok, Value} -> - io:format(" ok]~n"), - {ok, Value}; - _Error -> % typical {error, econnrefused} - io:format("."), - receive after 10000 -> ok end, - fun_target(Addr, Fun, Tries_left-1) - end. - -do_connect(Addr, Fun) -> - case gen_tcp:connect(Addr, ?TS_PORT, [{reuseaddr, true}], 60000) of - {ok, Socket} -> - Fun({ok, Socket}); - Error -> - Error - end. - - - diff --git a/lib/test_server/test/Makefile b/lib/test_server/test/Makefile index afe5aff196..afccc28662 100644 --- a/lib/test_server/test/Makefile +++ b/lib/test_server/test/Makefile @@ -26,8 +26,8 @@ include $(ERL_TOP)/make/$(TARGET)/otp.mk MODULES= \ test_server_SUITE \ - test_server_line_SUITE \ - test_server_test_lib + test_server_test_lib \ + erl2html2_SUITE ERL_FILES= $(MODULES:%=%.erl) @@ -65,7 +65,6 @@ make_emakefile: >> $(EMAKEFILE) tests debug opt: make_emakefile - cd ../src && $(MAKE) ../ebin/test_server_line.beam erl $(ERL_MAKE_FLAGS) -make clean: diff --git a/lib/test_server/test/erl2html2_SUITE.erl b/lib/test_server/test/erl2html2_SUITE.erl new file mode 100644 index 0000000000..96175413a1 --- /dev/null +++ b/lib/test_server/test/erl2html2_SUITE.erl @@ -0,0 +1,254 @@ +%%%------------------------------------------------------------------- +%%% @author Siri Hansen <[email protected]> +%%% @copyright (C) 2012, Siri Hansen +%%% @doc +%%% +%%% @end +%%% Created : 15 Nov 2012 by Siri Hansen <[email protected]> +%%%------------------------------------------------------------------- +-module(erl2html2_SUITE). + +-compile(export_all). + +-include_lib("common_test/include/ct.hrl"). + + +-define(HEADER, + ["<!DOCTYPE HTML PUBLIC", + "\"-//W3C//DTD HTML 3.2 Final//EN\">\n", + "<!-- autogenerated by 'erl2html2' -->\n", + "<html>\n", + "<head><title>Module ", Src, "</title>\n", + "<meta http-equiv=\"cache-control\" ", + "content=\"no-cache\">\n", + "</head>\n", + "<body bgcolor=\"white\" text=\"black\" ", + "link=\"blue\" vlink=\"purple\" alink=\"red\">\n"]). + +%%-------------------------------------------------------------------- +%% @spec suite() -> Info +%% Info = [tuple()] +%% @end +%%-------------------------------------------------------------------- +suite() -> + [{timetrap,{seconds,30}}, + {ct_hooks,[ts_install_cth,test_server_test_lib]}]. + +%%-------------------------------------------------------------------- +%% @spec init_per_suite(Config0) -> +%% Config1 | {skip,Reason} | {skip_and_save,Reason,Config1} +%% Config0 = Config1 = [tuple()] +%% Reason = term() +%% @end +%%-------------------------------------------------------------------- +init_per_suite(Config) -> + Config. + +%%-------------------------------------------------------------------- +%% @spec end_per_suite(Config0) -> void() | {save_config,Config1} +%% Config0 = Config1 = [tuple()] +%% @end +%%-------------------------------------------------------------------- +end_per_suite(_Config) -> + ok. + +%%-------------------------------------------------------------------- +%% @spec init_per_group(GroupName, Config0) -> +%% Config1 | {skip,Reason} | {skip_and_save,Reason,Config1} +%% GroupName = atom() +%% Config0 = Config1 = [tuple()] +%% Reason = term() +%% @end +%%-------------------------------------------------------------------- +init_per_group(_GroupName, Config) -> + Config. + +%%-------------------------------------------------------------------- +%% @spec end_per_group(GroupName, Config0) -> +%% void() | {save_config,Config1} +%% GroupName = atom() +%% Config0 = Config1 = [tuple()] +%% @end +%%-------------------------------------------------------------------- +end_per_group(_GroupName, _Config) -> + ok. + +%%-------------------------------------------------------------------- +%% @spec init_per_testcase(TestCase, Config0) -> +%% Config1 | {skip,Reason} | {skip_and_save,Reason,Config1} +%% TestCase = atom() +%% Config0 = Config1 = [tuple()] +%% Reason = term() +%% @end +%%-------------------------------------------------------------------- +init_per_testcase(_TestCase, Config) -> + Config. + +%%-------------------------------------------------------------------- +%% @spec end_per_testcase(TestCase, Config0) -> +%% void() | {save_config,Config1} | {fail,Reason} +%% TestCase = atom() +%% Config0 = Config1 = [tuple()] +%% Reason = term() +%% @end +%%-------------------------------------------------------------------- +end_per_testcase(_TestCase, _Config) -> + ok. + +%%-------------------------------------------------------------------- +%% @spec groups() -> [Group] +%% Group = {GroupName,Properties,GroupsAndTestCases} +%% GroupName = atom() +%% Properties = [parallel | sequence | Shuffle | {RepeatType,N}] +%% GroupsAndTestCases = [Group | {group,GroupName} | TestCase] +%% TestCase = atom() +%% Shuffle = shuffle | {shuffle,{integer(),integer(),integer()}} +%% RepeatType = repeat | repeat_until_all_ok | repeat_until_all_fail | +%% repeat_until_any_ok | repeat_until_any_fail +%% N = integer() | forever +%% @end +%%-------------------------------------------------------------------- +groups() -> + []. + +%%-------------------------------------------------------------------- +%% @spec all() -> GroupsAndTestCases | {skip,Reason} +%% GroupsAndTestCases = [{group,GroupName} | TestCase] +%% GroupName = atom() +%% TestCase = atom() +%% Reason = term() +%% @end +%%-------------------------------------------------------------------- +all() -> + [m1]. + +%%-------------------------------------------------------------------- +%% @spec TestCase() -> Info +%% Info = [tuple()] +%% @end +%%-------------------------------------------------------------------- +m1() -> + []. + +%%-------------------------------------------------------------------- +%% @spec TestCase(Config0) -> +%% ok | exit() | {skip,Reason} | {comment,Comment} | +%% {save_config,Config1} | {skip_and_save,Reason,Config1} +%% Config0 = Config1 = [tuple()] +%% Reason = term() +%% Comment = term() +%% @end +%%-------------------------------------------------------------------- +m1(Config) -> + {Src,Dst} = convert_module("m1",Config), + {true,L} = check_line_numbers(Src,Dst), + ok = check_link_targets(Src,Dst,L,[{baz,0}]), + ok. + +convert_module(Mod,Config) -> + DataDir = ?config(data_dir,Config), + PrivDir = ?config(priv_dir,Config), + Src = filename:join(DataDir,Mod++".erl"), + Dst = filename:join(PrivDir,Mod++".erl.html"), + io:format("<a href=\"~s\">~s</a>\n",[Src,filename:basename(Src)]), + ok = erl2html2:convert(Src, Dst, "<html><body>"), + io:format("<a href=\"~s\">~s</a>\n",[Dst,filename:basename(Dst)]), + {Src,Dst}. + +%% Check that there are the same number of lines in each file, and +%% that all line numbers are displayed in the dst file. +check_line_numbers(Src,Dst) -> + {ok,SFd} = file:open(Src,[read]), + {ok,DFd} = file:open(Dst,[read]), + {ok,SN} = count_src_lines(SFd,0), + ok = file:close(SFd), + {ok,DN} = read_dst_line_numbers(DFd), + ok = file:close(DFd), + {SN == DN,SN}. + +count_src_lines(Fd,N) -> + case io:get_line(Fd,"") of + eof -> + {ok,N}; + {error,Reason} -> + {error,Reason,N}; + _Line -> + count_src_lines(Fd,N+1) + end. + +read_dst_line_numbers(Fd) -> + "<html><body><pre>\n" = io:get_line(Fd,""), + read_dst_line_numbers(Fd,0). +read_dst_line_numbers(Fd,Last) when is_integer(Last) -> + case io:get_line(Fd,"") of + eof -> + {ok,Last}; + {error,Reason} -> + {error,Reason,Last}; + "</pre>"++_ -> + {ok,Last}; + "</body>"++_ -> + {ok,Last}; + Line -> + %% erlang:display(Line), + Num = check_line_number(Last,Line,Line), + read_dst_line_numbers(Fd,Num) + end. + +check_line_number(Last,Line,OrigLine) -> + case Line of + "<a name="++_ -> + [$>|Rest] = lists:dropwhile(fun($>) -> false; (_) -> true end,Line), + check_line_number(Last,Rest,OrigLine); + _ -> + [N |_] = string:tokens(Line,":"), +% erlang:display(N), + Num = + try list_to_integer(string:strip(N)) + catch _:_ -> ct:fail({no_line_number_after,Last,OrigLine}) + end, + if Num == Last+1 -> + Num; + true -> + ct:fail({unexpected_integer,Num,Last}) + end + end. + + +%% Check that there is one link target for each line and one for each +%% function. +%% The test module has -compile(export_all), so all functions are +%% found by listing the exported ones. +check_link_targets(Src,Dst,L,RmFncs) -> + Mod = list_to_atom(filename:basename(filename:rootname(Src))), + Exports = Mod:module_info(exports)--[{module_info,0},{module_info,1}|RmFncs], + {ok,{[],L},_} = xmerl_sax_parser:file(Dst, + [{event_fun,fun sax_event/3}, + {event_state,{Exports,0}}]), + ok. + +sax_event(Event,_Loc,State) -> + sax_event(Event,State). + +sax_event({startElement,_Uri,"a",_QN,Attrs},{Exports,PrevLine}) -> + {_,_,"name",Name} = lists:keyfind("name",3,Attrs), + case catch list_to_integer(Name) of + Line when is_integer(Line) -> + case PrevLine + 1 of + Line -> +% erlang:display({found_line,Line}), + {Exports,Line}; + Other -> + ct:fail({unexpected_line_number_target,Other}) + end; + {'EXIT',_} -> + {match,[FStr,AStr]} = + re:run(Name,"^(.*)-([0-9]+)$",[{capture,all_but_first,list}]), + F = list_to_atom(http_uri:decode(FStr)), + A = list_to_integer(AStr), +% erlang:display({found_fnc,F,A}), + A = proplists:get_value(F,Exports), + {lists:delete({F,A},Exports),PrevLine} + end; +sax_event(_,State) -> + State. diff --git a/lib/test_server/test/erl2html2_SUITE_data/Makefile.src b/lib/test_server/test/erl2html2_SUITE_data/Makefile.src new file mode 100644 index 0000000000..942ac0584b --- /dev/null +++ b/lib/test_server/test/erl2html2_SUITE_data/Makefile.src @@ -0,0 +1,2 @@ +all: + erlc -Iinclude m1.erl
\ No newline at end of file diff --git a/lib/test_server/test/erl2html2_SUITE_data/header1.hrl b/lib/test_server/test/erl2html2_SUITE_data/header1.hrl new file mode 100644 index 0000000000..53d1b79ac5 --- /dev/null +++ b/lib/test_server/test/erl2html2_SUITE_data/header1.hrl @@ -0,0 +1,4 @@ +baz() -> + ok. + +-define(MACRO_DEFINING_A_FUNCTION,quux() -> ok). diff --git a/lib/test_server/test/erl2html2_SUITE_data/include/header2.hrl b/lib/test_server/test/erl2html2_SUITE_data/include/header2.hrl new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/lib/test_server/test/erl2html2_SUITE_data/include/header2.hrl diff --git a/lib/test_server/test/erl2html2_SUITE_data/m1.erl b/lib/test_server/test/erl2html2_SUITE_data/m1.erl new file mode 100644 index 0000000000..156f1d0a51 --- /dev/null +++ b/lib/test_server/test/erl2html2_SUITE_data/m1.erl @@ -0,0 +1,46 @@ +%% Comment with <html> code & </html> +%% and also some "quotes" and 'single quotes' + +-module(m1). + +-compile(export_all). + +-include("header1.hrl"). +-include("header2.hrl"). + +-define(MACRO1,value). + +%%% Comment +foo(x) -> + %% Comment + ok_x; +foo(y) -> + %% Second clause + ok_y. + +'quoted_foo'() -> + ok. + +'quoted_foo_with_"_and_/'() -> + ok. + +'quoted_foo_with_(_and_)'() -> + ok. + +'quoted_foo_with_<_and_>'() -> + ok. + +bar() -> + do_something(), +ok. % indentation error, OTP-9710 + +%% Function inside macro definition +?MACRO_DEFINING_A_FUNCTION. + +%% Two function one one line +quuux() -> ok. quuuux() -> ok. + +%% do_something/0 does something +do_something() -> + ?MACRO1. +%% comments after last line diff --git a/lib/test_server/test/test_server.cover b/lib/test_server/test/test_server.cover index 5c59bab494..052415377d 100644 --- a/lib/test_server/test/test_server.cover +++ b/lib/test_server/test/test_server.cover @@ -1,22 +1 @@ {incl_app,test_server,details}. - -{excl_mods, test_server, [test_server, - test_server_ctrl, - ts_selftest]}. - -%% Using incl_mods list here because the test_server might not find -%% lib_dir for test_server - and so it will not find which modules to -%% compile. -{incl_mods, test_server, [erl2html2, - test_server_node, - test_server_sup, - ts, - ts_autoconf_vxworks, - ts_autoconf_win32, - ts_erl_config, - ts_install, - ts_lib, - ts_make, - ts_run, - vxworks_client]}. - diff --git a/lib/test_server/test/test_server_SUITE.erl b/lib/test_server/test/test_server_SUITE.erl index a8532b08ab..95a3423fef 100644 --- a/lib/test_server/test/test_server_SUITE.erl +++ b/lib/test_server/test/test_server_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2011. All Rights Reserved. +%% Copyright Ericsson AB 2010-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -79,7 +79,8 @@ groups() -> all() -> [test_server_SUITE, test_server_parallel01_SUITE, test_server_conf02_SUITE, test_server_conf01_SUITE, - test_server_skip_SUITE, test_server_shuffle01_SUITE]. + test_server_skip_SUITE, test_server_shuffle01_SUITE, + test_server_break_SUITE]. %%-------------------------------------------------------------------- @@ -92,8 +93,8 @@ test_server_SUITE(Config) -> % rpc:call(Node,dbg, tracer,[]), % rpc:call(Node,dbg, p,[all,c]), % rpc:call(Node,dbg, tpl,[test_server_ctrl,x]), - run_test_server_tests("test_server_SUITE", 39, 1, 31, - 20, 9, 1, 11, 2, 26, Config). + run_test_server_tests("test_server_SUITE", 38, 1, 30, + 19, 9, 1, 11, 2, 25, Config). test_server_parallel01_SUITE(Config) -> run_test_server_tests("test_server_parallel01_SUITE", 37, 0, 19, @@ -115,14 +116,18 @@ test_server_conf02_SUITE(Config) -> run_test_server_tests("test_server_conf02_SUITE", 26, 0, 12, 12, 0, 0, 0, 0, 26, Config). +test_server_break_SUITE(Config) -> + D = run_test_server_tests("test_server_break_SUITE", 8, 2, 6, + 4, 0, 0, 0, 2, 6, Config), + D. run_test_server_tests(SuiteName, NCases, NFail, NExpected, NSucc, NUsrSkip, NAutoSkip, NActualSkip, NActualFail, NActualSucc, Config) -> - ct:log("See test case log files under:~n~p~n", - [filename:join([proplists:get_value(priv_dir, Config), - SuiteName++".logs"])]), + WorkDir = proplists:get_value(work_dir, Config), + ct:log("<a href=\"file://~s\">Test case log files</a>\n", + [filename:join(WorkDir, SuiteName++".logs")]), Node = proplists:get_value(node, Config), {ok,_Pid} = rpc:call(Node,test_server_ctrl, start, []), @@ -138,17 +143,18 @@ run_test_server_tests(SuiteName, NCases, NFail, NExpected, NSucc, rpc:call(Node,test_server_ctrl, stop, []), - {ok,#suite{ n_cases = NCases, - n_cases_failed = NFail, - n_cases_expected = NExpected, - n_cases_succ = NSucc, - n_cases_user_skip = NUsrSkip, - n_cases_auto_skip = NAutoSkip, - cases = Cases }} = Data = - test_server_test_lib:parse_suite( - hd(filelib:wildcard( - filename:join([proplists:get_value(priv_dir, Config), - SuiteName++".logs","run*","suite.log"])))), + {ok,Data} = test_server_test_lib:parse_suite( + lists:last( + lists:sort( + filelib:wildcard( + filename:join([WorkDir,SuiteName++".logs", + "run*","suite.log"]))))), + check([{"Number of cases",NCases,Data#suite.n_cases}, + {"Number failed",NFail,Data#suite.n_cases_failed}, + {"Number expected",NExpected,Data#suite.n_cases_expected}, + {"Number successful",NSucc,Data#suite.n_cases_succ}, + {"Number user skipped",NUsrSkip,Data#suite.n_cases_user_skip}, + {"Number auto skipped",NAutoSkip,Data#suite.n_cases_auto_skip}], ok), {NActualSkip,NActualFail,NActualSucc} = lists:foldl(fun(#tc{ result = skip },{S,F,Su}) -> {S+1,F,Su}; @@ -156,9 +162,18 @@ run_test_server_tests(SuiteName, NCases, NFail, NExpected, NSucc, {S,F,Su+1}; (#tc{ result = failed },{S,F,Su}) -> {S,F+1,Su} - end,{0,0,0},Cases), + end,{0,0,0},Data#suite.cases), Data. +check([{Str,Same,Same}|T], Status) -> + io:format("~s: ~p\n", [Str,Same]), + check(T, Status); +check([{Str,Expected,Actual}|T], _) -> + io:format("~s: expected ~p, actual ~p\n", [Str,Expected,Actual]), + check(T, error); +check([], ok) -> ok; +check([], error) -> ?t:fail(). + until(Fun) -> case Fun() of true -> diff --git a/lib/test_server/test/test_server_SUITE_data/Makefile.src b/lib/test_server/test/test_server_SUITE_data/Makefile.src index 332b855df6..ec8ddd78b0 100644 --- a/lib/test_server/test/test_server_SUITE_data/Makefile.src +++ b/lib/test_server/test/test_server_SUITE_data/Makefile.src @@ -4,4 +4,5 @@ all: erlc test_server_conf01_SUITE.erl erlc test_server_shuffle01_SUITE.erl erlc test_server_conf02_SUITE.erl - erlc test_server_skip_SUITE.erl
\ No newline at end of file + erlc test_server_skip_SUITE.erl + erlc test_server_break_SUITE.erl
\ No newline at end of file diff --git a/lib/test_server/test/test_server_SUITE_data/test_server_SUITE.erl b/lib/test_server/test/test_server_SUITE_data/test_server_SUITE.erl index dfcdff0c3e..fc2adcd651 100644 --- a/lib/test_server/test/test_server_SUITE_data/test_server_SUITE.erl +++ b/lib/test_server/test/test_server_SUITE_data/test_server_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 1997-2011. All Rights Reserved. +%% Copyright Ericsson AB 1997-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -34,7 +34,7 @@ do_times/1, do_times_mfa/1, do_times_fun/1, skip_cases/1, skip_case1/1, skip_case2/1, skip_case3/1, skip_case4/1, skip_case5/1, skip_case6/1, skip_case7/1, - skip_case8/1, skip_case9/1, undefined_functions/1, + skip_case8/1, skip_case9/1, conf_init/1, check_new_conf/1, conf_cleanup/1, check_old_conf/1, conf_init_fail/1, start_stop_node/1, cleanup_nodes_init/1, check_survive_nodes/1, cleanup_nodes_fin/1, @@ -47,7 +47,7 @@ all(suite) -> [config, comment, timetrap, timetrap_cancel, multiply_timetrap, init_per_s, init_per_tc, end_per_tc, timeconv, msgs, capture, timecall, do_times, skip_cases, - undefined_functions, commercial, + commercial, {conf, conf_init, [check_new_conf], conf_cleanup}, check_old_conf, {conf, conf_init_fail,[conf_member_skip],conf_cleanup_skip}, @@ -386,50 +386,6 @@ skip_case9(Config) when is_list(Config) -> %% returning {skip, Reason} from init_per_testcase/2 for this case. ?t:fail("This case should have been Skipped by init_per_testcase/2"). -undefined_functions(suite) -> []; -undefined_functions(doc) -> ["Check for calls to undefined functions in" - " test_server." - "Skip if cover is running"]; -undefined_functions(Config) when is_list(Config) -> - case whereis(cover_server) of - Pid when is_pid(Pid) -> - {skip,"Cover is running"}; - undefined -> - undefined_functions() - end. - -undefined_functions() -> - TestServerDir = filename:dirname(code:which(test_server)), - Res = xref:d(TestServerDir), - - {value,{unused,Unused}} = lists:keysearch(unused, 1, Res), - case Unused of - [] -> ok; - _ -> - lists:foreach(fun (MFA) -> - io:format("~s unused", [format_mfa(MFA)]) - end, Unused) - end, - - {value,{undefined,Undef0}} = lists:keysearch(undefined, 1, Res), - Undef = [U || U <- Undef0, not unresolved(U)], - case Undef of - [] -> ok; - _ -> - lists:foreach(fun ({MFA1,MFA2}) -> - io:format("~s calls undefined ~s", - [format_mfa(MFA1),format_mfa(MFA2)]) - end, Undef), - ?t:fail({length(Undef),undefined_functions_in_otp}) - end, - ok. - -unresolved({_,{_,'$F_EXPR',_}}) -> true; -unresolved(_) -> false. - -format_mfa({M,F,A}) -> - lists:flatten(io_lib:format("~s:~s/~p", [M,F,A])). - conf_init(doc) -> ["Test successful conf case: Change Config parameter"]; conf_init(Config) when is_list(Config) -> [{conf_init_var,1389}|Config]. @@ -477,7 +433,7 @@ start_stop_node(Config) when is_list(Config) -> ?t:comment("WARNING: Node started with {wait,false}" " is up faster than expected..."); false -> - wait_for_node(Node4,0), + test_server:wait_for_node(Node4), true = lists:member(Node4,nodes()) end, @@ -494,16 +450,6 @@ start_stop_node(Config) when is_list(Config) -> ok. - -wait_for_node(Node,Acc) -> - case net_adm:ping(Node) of - pang -> - timer:sleep(100), - wait_for_node(Node,Acc+100); - pong -> - Acc - end. - cleanup_nodes_init(doc) -> ["Test that nodes are terminated when test case" " is finished unless {cleanup,false} is given."]; cleanup_nodes_init(Config) when is_list(Config) -> diff --git a/lib/test_server/test/test_server_SUITE_data/test_server_break_SUITE.erl b/lib/test_server/test/test_server_SUITE_data/test_server_break_SUITE.erl new file mode 100644 index 0000000000..70e30a3334 --- /dev/null +++ b/lib/test_server/test/test_server_SUITE_data/test_server_break_SUITE.erl @@ -0,0 +1,148 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2012. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% +%% +-module(test_server_break_SUITE). + +-export([all/1, init_per_suite/1, end_per_suite/1]). +-export([init_per_testcase/2, end_per_testcase/2]). +-export([break_in_init_tc/1, + break_in_tc/1, + break_in_end_tc/1, + break_in_end_tc_after_fail/1, + break_in_end_tc_after_abort/1, + check_all_breaks/1]). + +-include_lib("test_server/include/test_server.hrl"). + +all(suite) -> + [break_in_init_tc, + break_in_tc, + break_in_end_tc, + break_in_end_tc_after_fail, + break_in_end_tc_after_abort, + check_all_breaks]. %must be the last test - checks result of previous tests + +init_per_suite(Config) -> + spawn(fun break_and_continue_sup/0), + Config. + +end_per_suite(Config) -> + ok. + +init_per_testcase(Case,Config) when Case==break_in_init_tc -> + Config1 = init_timetrap(500,Config), + break_and_check(Case), + Config1; +init_per_testcase(Case,Config) when Case==check_all_breaks -> + init_timetrap({seconds,20},Config); +init_per_testcase(_Case,Config) -> + init_timetrap(500,Config). + +init_timetrap(T,Config) -> + Dog = ?t:timetrap(T), + [{watchdog, Dog}|Config]. + +end_per_testcase(Case,Config) when Case==break_in_end_tc; + Case==break_in_end_tc_after_fail; + Case==break_in_end_tc_after_abort -> + break_and_check(Case), + cancel_timetrap(Config); +end_per_testcase(_Case,Config) -> + cancel_timetrap(Config). + +cancel_timetrap(Config) -> + Dog=?config(watchdog, Config), + ?t:timetrap_cancel(Dog), + ok. + + +%%%----------------------------------------------------------------- +%%% Test cases + +break_in_init_tc(Config) when is_list(Config) -> + ok. + +break_in_tc(Config) when is_list(Config) -> + break_and_check(break_in_tc), + ok. + +break_in_end_tc(Config) when is_list(Config) -> + ok. + +break_in_end_tc_after_fail(Config) when is_list(Config) -> + ?t:fail(test_case_should_fail). + +break_in_end_tc_after_abort(Config) when is_list(Config) -> + ?t:adjusted_sleep(2000). % will cause a timetrap timeout + +%%%----------------------------------------------------------------- +%%% Internal functions + +%% This test case checks that all breaks in previous test cases was +%% also continued, and that the break lasted as long as expected. +%% The reason for this is that some of the breaks above are in +%% end_per_testcase, and failures there will only produce a warning, +%% not an error - so this is to catch the error for real. +check_all_breaks(Config) -> + break_and_continue_sup ! {done,self()}, + receive {Breaks,Continued} -> + check_all_breaks(Breaks,Continued) + end. + +check_all_breaks([{From,Case,T,Start}|Breaks],[{From,End}|Continued]) -> + Diff = timer:now_diff(End,Start), + DiffSec = round(Diff/1000000), + TSec = round(T/1000000), + if DiffSec==TSec -> + ?t:format("Break in ~p successfully continued after ~p second(s)~n", + [Case,DiffSec]), + check_all_breaks(Breaks,Continued); + true -> + ?t:format("Faulty duration of break in ~p: continued after ~p second(s)~n", + [Case,DiffSec]), + ?t:fail({faulty_diff,Case,DiffSec,TSec}) + end; +check_all_breaks([],[]) -> + ok; +check_all_breaks(Breaks,Continued) -> + %% This is probably a case of a missing continue - i.e. a break + %% has been started, but it was never continued. + ?t:fail({no_match_in_breaks_and_continued,Breaks,Continued}). + +break_and_check(Case) -> + break_and_continue_sup ! {break,Case,1000,self()}, + ?t:break(atom_to_list(Case)), + break_and_continue_sup ! {continued,self()}, + ok. + +break_and_continue_sup() -> + register(break_and_continue_sup,self()), + break_and_continue_loop([],[]). + +break_and_continue_loop(Breaks,Continued) -> + receive + {break,Case,T,From} -> + Start = now(), + {RealT,_} = timer:tc(?t,adjusted_sleep,[T]), + ?t:continue(), + break_and_continue_loop([{From,Case,RealT,Start}|Breaks],Continued); + {continued,From} -> + break_and_continue_loop(Breaks,[{From,now()}|Continued]); + {done,From} -> + From ! {lists:reverse(Breaks),lists:reverse(Continued)} + end. diff --git a/lib/test_server/test/test_server_line_SUITE.erl b/lib/test_server/test/test_server_line_SUITE.erl deleted file mode 100644 index 0aba54f6b5..0000000000 --- a/lib/test_server/test/test_server_line_SUITE.erl +++ /dev/null @@ -1,131 +0,0 @@ -%% -%% %CopyrightBegin% -%% -%% Copyright Ericsson AB 2004-2011. All Rights Reserved. -%% -%% The contents of this file are subject to the Erlang Public License, -%% Version 1.1, (the "License"); you may not use this file except in -%% compliance with the License. You should have received a copy of the -%% Erlang Public License along with this software. If not, it can be -%% retrieved online at http://www.erlang.org/. -%% -%% Software distributed under the License is distributed on an "AS IS" -%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See -%% the License for the specific language governing rights and limitations -%% under the License. -%% -%% %CopyrightEnd% -%% - -%%%------------------------------------------------------------------ -%%% Test Server self test. -%%%------------------------------------------------------------------ --module(test_server_line_SUITE). --include_lib("test_server/include/test_server.hrl"). - --export([all/0,suite/0]). --export([init_per_suite/1,end_per_suite/1, - init_per_testcase/2, end_per_testcase/2]). --export([parse_transform/1, lines/1]). - -suite() -> - [{ct_hooks,[ts_install_cth]}, - {doc,["Test of parse transform for collection line numbers"]}]. - -all() -> [parse_transform,lines]. - -init_per_suite(Config) -> - Config. - -end_per_suite(_Config) -> - ok. - -init_per_testcase(_Case, Config) -> - ?line test_server_line:clear(), - Dog = ?t:timetrap(?t:minutes(2)), - [{watchdog, Dog}|Config]. - -end_per_testcase(_Case, Config) -> - ?line test_server_line:clear(), - Dog=?config(watchdog, Config), - ?t:timetrap_cancel(Dog), - ok. - -parse_transform(suite) -> []; -parse_transform(doc) -> []; -parse_transform(Config) when is_list(Config) -> - ?line DataDir = ?config(data_dir,Config), - code:add_pathz(DataDir), - - ?line ok = parse_transform_test:excluded(), - ?line [] = test_server_line:get_lines(), - - ?line test_server_line:clear(), - ?line ok = parse_transform_test:func(), - - ?line [{parse_transform_test,func4,58}, - {parse_transform_test,func,49}, - {parse_transform_test,func3,56}, - {parse_transform_test,func,39}, - {parse_transform_test,func2,54}, - {parse_transform_test,func,36}, - {parse_transform_test,func1,52}, - {parse_transform_test,func,35}] = test_server_line:get_lines(), - - code:del_path(DataDir), - ok. - -lines(suite) -> []; -lines(doc) -> ["Test parse transform for collection line numbers"]; -lines(Config) when is_list(Config) -> - ?line L0 = [{mod,func,1},{mod,func,2},{mod,func,3}, - {m,f,4},{m,f,5},{m,f,6}, - {mo,fu,7},{mo,fu,8},{mo,fu,9}], - ?line LL = string:copies(L0, 1000), - ?line T1 = erlang:now(), - ?line lists:foreach(fun ({M,F,L}) -> - test_server_line:'$test_server_line'(M, F, L) - end, LL), - ?line T2 = erlang:now(), - ?line Long = test_server_line:get_lines(), - ?line test_server_line:clear(), - - ?line T3 = erlang:now(), - ?line lists:foreach(fun ({M,F,L}) -> - test_server_line:'$test_server_lineQ'(M, F, L) - end, LL), - ?line T4 = erlang:now(), - ?line LongQ = test_server_line:get_lines(), - - ?line io:format("'$test_server_line': ~f~n'$test_server_lineQ': ~f~n", - [timer:now_diff(T2, T1)/1000, timer:now_diff(T4, T3)/1000]), - ?line io:format("'$test_server_line' result long:~p~n", [Long]), - ?line io:format("'$test_server_lineQ' result long:~p~n", [LongQ]), - - if Long =:= LongQ -> - ?line ok; - true -> - ?line ?t:fail("The two methods did not produce same result for" - " long lists of lines") - end, - - ?line test_server_line:clear(), - ?line lists:foreach(fun ({M,F,L}) -> - test_server_line:'$test_server_line'(M, F, L) - end, L0), - ?line Short = test_server_line:get_lines(), - ?line test_server_line:clear(), - ?line lists:foreach(fun ({M,F,L}) -> - test_server_line:'$test_server_lineQ'(M, F, L) - end, L0), - ?line ShortQ = test_server_line:get_lines(), - - ?line io:format("'$test_server_line' result short:~p~n", [Short]), - ?line io:format("'$test_server_lineQ' result short:~p~n", [ShortQ]), - - if Short =:= ShortQ -> - ?line ok; - true -> - ?line ?t:fail("The two methods did not produce same result for" - " shot lists of lines\n") - end. diff --git a/lib/test_server/test/test_server_line_SUITE_data/Makefile.src b/lib/test_server/test/test_server_line_SUITE_data/Makefile.src deleted file mode 100644 index a077648934..0000000000 --- a/lib/test_server/test/test_server_line_SUITE_data/Makefile.src +++ /dev/null @@ -1,6 +0,0 @@ -EFLAGS=+debug_info -pa ../../test_server -I../../test_server - -all: parse_transform_test.@EMULATOR@ - -parse_transform_test.@EMULATOR@: parse_transform_test.erl - erlc $(EFLAGS) parse_transform_test.erl diff --git a/lib/test_server/test/test_server_line_SUITE_data/parse_transform_test.erl b/lib/test_server/test/test_server_line_SUITE_data/parse_transform_test.erl deleted file mode 100644 index 8f3477d3ac..0000000000 --- a/lib/test_server/test/test_server_line_SUITE_data/parse_transform_test.erl +++ /dev/null @@ -1,59 +0,0 @@ -%% -%% %CopyrightBegin% -%% -%% Copyright Ericsson AB 2004-2011. All Rights Reserved. -%% -%% The contents of this file are subject to the Erlang Public License, -%% Version 1.1, (the "License"); you may not use this file except in -%% compliance with the License. You should have received a copy of the -%% Erlang Public License along with this software. If not, it can be -%% retrieved online at http://www.erlang.org/. -%% -%% Software distributed under the License is distributed on an "AS IS" -%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See -%% the License for the specific language governing rights and limitations -%% under the License. -%% -%% %CopyrightEnd% -%% --module(parse_transform_test). - --include("test_server_line.hrl"). --no_lines([{excluded,0}]). - --export([excluded/0, func/0]). - - -excluded() -> - line1, - line2, - ok. - - -func() -> - hello, - func1(), - case func2() of - ok -> - helloagain, - case func3() of - ok -> - ok; - error -> - error - end; - error -> - error - end, - excluded(), - func4(). - -func1() -> - ok. -func2() -> - ok. -func3() -> - error. -func4() -> - ok. - diff --git a/lib/test_server/test/test_server_test_lib.erl b/lib/test_server/test/test_server_test_lib.erl index 5ca24f3df7..4e89abf308 100644 --- a/lib/test_server/test/test_server_test_lib.erl +++ b/lib/test_server/test/test_server_test_lib.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2009-2011. All Rights Reserved. +%% Copyright Ericsson AB 2009-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -54,9 +54,13 @@ start_slave(Config,_Level) -> ok end, DataDir = proplists:get_value(data_dir, Config), - PrivDir = proplists:get_value(priv_dir, Config), + %% We would normally use priv_dir for temporary data, + %% but the pathnames gets too long on Windows. + %% Until the run-time system can support long pathnames, + %% use the data dir. + WorkDir = DataDir, - %% PrivDir as well as directory of Test Server suites + %% WorkDir as well as directory of Test Server suites %% have to be in code path on Test Server node. [_ | Parts] = lists:reverse(filename:split(DataDir)), TSDir = filename:join(lists:reverse(Parts)), @@ -64,7 +68,7 @@ start_slave(Config,_Level) -> undefined -> []; Ds -> Ds end, - PathDirs = [PrivDir,TSDir | AddPathDirs], + PathDirs = [WorkDir,TSDir | AddPathDirs], [true = rpc:call(Node, code, add_patha, [D]) || D <- PathDirs], io:format("Dirs added to code path (on ~w):~n", [Node]), @@ -73,13 +77,18 @@ start_slave(Config,_Level) -> true = rpc:call(Node, os, putenv, ["TEST_SERVER_FRAMEWORK", "undefined"]), - ok = rpc:call(Node, file, set_cwd, [PrivDir]), - [{node,Node} | Config] + ok = rpc:call(Node, file, set_cwd, [WorkDir]), + [{node,Node}, {work_dir,WorkDir} | Config] end. post_end_per_testcase(_TC, Config, Return, State) -> Node = proplists:get_value(node, Config), - cover:stop(Node), + case test_server:is_cover() of + true -> + cover:flush(Node); + false -> + ok + end, slave:stop(Node), {Return, State}. |