diff options
Diffstat (limited to 'lib')
418 files changed, 22724 insertions, 26506 deletions
diff --git a/lib/asn1/doc/src/asn1_ug.xml b/lib/asn1/doc/src/asn1_ug.xml index 1b399fb641..6cb251c3e2 100644 --- a/lib/asn1/doc/src/asn1_ug.xml +++ b/lib/asn1/doc/src/asn1_ug.xml @@ -186,13 +186,21 @@ END </pre> The following shows how the compiler can be called from the Erlang shell:</p> <pre> -1><input>asn1ct:compile("People",[ber_bin]).</input> +1><input>asn1ct:compile("People", [ber]).</input> +ok +2> </pre> + + <p>The <c>verbose</c> option can be given to have information + about the generated files printed:</p> + <pre> +2><input>asn1ct:compile("People", [ber,verbose]).</input> Erlang ASN.1 compiling "People.asn" --{generated,"People.asn1db"}-- --{generated,"People.hrl"}-- --{generated,"People.erl"}-- ok -2> </pre> +3> </pre> + <p>The ASN.1 module People is now accepted and the abstract syntax tree is saved in the <c>People.asn1db</c> file, the generated Erlang code is compiled using the Erlang compiler and @@ -229,7 +237,7 @@ receive constructed and encoded using <c>'People':encode('Person',Answer)</c> which takes an instance of a defined ASN.1 type and transforms it to a - (possibly) nested list of bytes according to the BER or PER + binary according to the BER or PER encoding-rules. <br></br> The encoder and the decoder can also be run from @@ -239,24 +247,12 @@ The encoder and the decoder can also be run from <pre> 2> <input>Rockstar = {'Person',"Some Name",roving,50}.</input> {'Person',"Some Name",roving,50} -3> <input>{ok,Bytes} = asn1rt:encode('People','Person',Rockstar).</input> -{ok,[<<243>>, - [17], - [19,9,"Some Name"], - [2,1,[2]], - [2,1,"2"]]} -4> <input>Bin = list_to_binary(Bytes).</input> -<<243,17,19,9,83,111,109,101,32,78,97,109,101,2,1,2,2,1,50>> -5> <input>{ok,Person} = asn1rt:decode('People','Person',Bin).</input> +3> <input>{ok,Bin} = asn1rt:encode('People','Person',Rockstar).</input> +{ok,<<243,17,19,9,83,111,109,101,32,78,97,109,101,2,1,2, + 2,1,50>>} +4> <input>{ok,Person} = asn1rt:decode('People','Person',Bin).</input> {ok,{'Person',"Some Name",roving,50}} -6> </pre> - <p>Notice that the result from <c>encode</c> is a nested list which - must be turned into a binary before the call to <c>decode</c>. A - binary is necessary as input to decode since the module was compiled - with the <c>ber_bin</c> option - The reason for returning a nested list is that it is faster to produce - and the <c>list_to_binary</c> operation is - performed automatically when the list is sent via the Erlang port mechanism.</p> +5> </pre> </section> <section> @@ -305,17 +301,15 @@ The encoder and the decoder can also be run from ASN.1 compiler:</p> <pre> erlc Person.asn -erlc -bper_bin Person.asn -erlc -bber_bin +optimize ../Example.asn +erlc -bper Person.asn +erlc -bber ../Example.asn erlc -o ../asnfiles -I ../asnfiles -I /usr/local/standards/asn1 Person.asn </pre> <p>The useful options for the ASN.1 compiler are:</p> <taglist> - <tag><c>-b[ber | per | ber_bin | per_bin | uper_bin]</c></tag> + <tag><c>-b[ber | per | uper]</c></tag> <item> <p>Choice of encoding rules, if omitted <c>ber</c> is the - default. The <c>ber_bin</c> and <c>per_bin</c> options - allows for optimizations and are therefore recommended - instead of the <c>ber</c> and <c>per</c> options.</p> + default.</p> </item> <tag><c>-o OutDirectory</c></tag> <item> @@ -339,42 +333,12 @@ erlc -o ../asnfiles -I ../asnfiles -I /usr/local/standards/asn1 Person.asn </item> <tag><c>+der</c></tag> <item> - <p>DER encoding rule. Only when using <c>-ber</c> or - <c>-ber_bin</c> option.</p> - </item> - <tag><c>+optimize</c></tag> - <item> - <p>This flag has effect only when used together with one of - <c>per_bin</c> or <c>ber_bin</c> flags. It gives time optimized - code in the generated modules and it uses another runtime module. - In the <c>per_bin</c> case a nif is used. The - result from an encode is a binary.</p> - <p><em>When this flag is used you cannot use the old format</em><c>{TypeName,Value}</c> when you encode values. Since it is - an unnecessary construct it has been removed in favor of - performance. It - is neither admitted to construct SEQUENCE or SET component values - with the format <c>{ComponentName,Value}</c> since it also is - unnecessary. The only case were it is necessary is in a CHOICE, - were you have to pass values to the right component by specifying - <c>{ComponentName,Value}</c>. See also about - <seealso marker="#TypeNameValue">{Typename,Value}</seealso> below - and in the sections for each type.</p> - </item> - <tag><c>+driver</c></tag> - <item> - <p>As of R15B this means the same as the <c>nif</c> option. Kept for - backwards compatability reasons.</p> - </item> - <tag><c>+nif</c></tag> - <item> - <p>Together with the flags <c>ber_bin</c> - and <c>optimize</c> you choose to use a nif for considerable - faster encode and decode. </p> + <p>DER encoding rule. Only when using <c>-ber</c> option.</p> </item> <tag><c>+asn1config</c></tag> <item> <p>This functionality works together with the flags - <c>ber_bin</c> and <c>optimize</c>. You enables the + <c>ber</c>. It enables the specialized decodes, see the <seealso marker="asn1_spec">Specialized Decode</seealso> chapter. </p> </item> @@ -413,7 +377,6 @@ erlc -o ../asnfiles -I ../asnfiles -I /usr/local/standards/asn1 Person.asn </item> </taglist> <p>For a complete description of <c>erlc</c> see Erts Reference Manual.</p> - <p>For preferred option use see <seealso marker="#preferred option use">Preferred Option Use</seealso> section.</p> <p>The compiler and other compile-time functions can also be invoked from the Erlang shell. Below follows a brief description of the primary functions, for a @@ -429,9 +392,9 @@ asn1ct:compile("H323-MESSAGES.asn1"). </pre> <p>which equals:</p> <pre> asn1ct:compile("H323-MESSAGES.asn1",[ber]). </pre> - <p>If one wants PER encoding with optimizations:</p> + <p>If one wants PER encoding:</p> <pre> -asn1ct:compile("H323-MESSAGES.asn1",[per_bin,optimize]). </pre> +asn1ct:compile("H323-MESSAGES.asn1",[per]). </pre> <p>The generic encode and decode functions can be invoked like this:</p> <pre> asn1ct:encode('H323-MESSAGES','SomeChoiceType',{call,"octetstring"}). @@ -443,269 +406,6 @@ asn1ct:decode('H323-MESSAGES','SomeChoiceType',Bytes). </pre> </section> <section> - <marker id="preferred option use"></marker> - <title>Preferred Option Use</title> - <p> - It may not be obvious which compile options best fit a - situation. This section describes the format of the result of - encode and decode. It also gives some performance statistics - when using certain options. Finally there is a recommendation - which option combinations should be used. - </p> - <p> - The default option is <c>ber</c>. It is the same backend as - <c>ber_bin</c> except that the result of encode is transformed - to a flat list. Below is a table that gives the different - formats of input and output of encode and decode using the - <em>allowed combinations</em> of coding and optimization - options: (EAVF stands for how ASN1 values are represented in - Erlang which is described in the <seealso - marker="#ASN1Types">ASN1 Types chapter</seealso>) - </p> - <table> - <row> - <cell align="left" valign="middle"><em>Encoding Rule</em></cell> - <cell align="left" valign="middle"><em>Compile options, allowed combinations</em></cell> - <cell align="left" valign="middle"><em>encode input</em></cell> - <cell align="left" valign="middle"><em>encode output</em></cell> - <cell align="left" valign="middle"><em>decode input</em></cell> - <cell align="left" valign="middle"><em>decode output</em></cell> - </row> - <row> - <cell align="left" valign="middle">BER</cell> - <cell align="left" valign="middle">[ber] (default)</cell> - <cell align="left" valign="middle">EAVF</cell> - <cell align="left" valign="middle">flat list</cell> - <cell align="left" valign="middle">flat list / binary</cell> - <cell align="left" valign="middle">EAVF</cell> - </row> - <row> - <cell align="left" valign="middle">BER</cell> - <cell align="left" valign="middle">[ber_bin]</cell> - <cell align="left" valign="middle">EAVF</cell> - <cell align="left" valign="middle">iolist</cell> - <cell align="left" valign="middle">binary</cell> - <cell align="left" valign="middle">EAVF</cell> - </row> - <row> - <cell align="left" valign="middle">BER</cell> - <cell align="left" valign="middle"><em>[ber_bin, optimize]</em></cell> - <cell align="left" valign="middle">EAVF</cell> - <cell align="left" valign="middle">iolist</cell> - <cell align="left" valign="middle">binary</cell> - <cell align="left" valign="middle">EAVF</cell> - </row> - <row> - <cell align="left" valign="middle">BER</cell> - <cell align="left" valign="middle"><em>[ber_bin, optimize, nif]</em></cell> - <cell align="left" valign="middle">EAVF</cell> - <cell align="left" valign="middle">iolist</cell> - <cell align="left" valign="middle">iolist / binary</cell> - <cell align="left" valign="middle">EAVF</cell> - </row> - <row> - <cell align="left" valign="middle">PER aligned variant</cell> - <cell align="left" valign="middle">[per]</cell> - <cell align="left" valign="middle">EAVF</cell> - <cell align="left" valign="middle">flat list</cell> - <cell align="left" valign="middle">flat list</cell> - <cell align="left" valign="middle">EAVF</cell> - </row> - <row> - <cell align="left" valign="middle">PER aligned variant</cell> - <cell align="left" valign="middle"><em>[per_bin]</em></cell> - <cell align="left" valign="middle">EAVF</cell> - <cell align="left" valign="middle">iolist / binary</cell> - <cell align="left" valign="middle">binary</cell> - <cell align="left" valign="middle">EAVF</cell> - </row> - <row> - <cell align="left" valign="middle">PER aligned variant</cell> - <cell align="left" valign="middle"><em>[per_bin, optimize]</em></cell> - <cell align="left" valign="middle">EAVF</cell> - <cell align="left" valign="middle">binary</cell> - <cell align="left" valign="middle">binary</cell> - <cell align="left" valign="middle">EAVF</cell> - </row> - <row> - <cell align="left" valign="middle">PER unaligned variant</cell> - <cell align="left" valign="middle"><em>[uper_bin]</em></cell> - <cell align="left" valign="middle">EAVF</cell> - <cell align="left" valign="middle">binary</cell> - <cell align="left" valign="middle">binary</cell> - <cell align="left" valign="middle">EAVF</cell> - </row> - - <row> - <cell align="left" valign="middle">DER</cell> - <cell align="left" valign="middle">[(ber), der]</cell> - <cell align="left" valign="middle">EAVF</cell> - <cell align="left" valign="middle">flat list</cell> - <cell align="left" valign="middle">flat list / binary</cell> - <cell align="left" valign="middle">EAVF</cell> - </row> - <row> - <cell align="left" valign="middle">DER</cell> - <cell align="left" valign="middle">[ber_bin, der]</cell> - <cell align="left" valign="middle">EAVF</cell> - <cell align="left" valign="middle">iolist</cell> - <cell align="left" valign="middle">binary</cell> - <cell align="left" valign="middle">EAVF</cell> - </row> - <row> - <cell align="left" valign="middle">DER</cell> - <cell align="left" valign="middle"><em>[ber_bin, optimize, der]</em></cell> - <cell align="left" valign="middle">EAVF</cell> - <cell align="left" valign="middle">iolist</cell> - <cell align="left" valign="middle">binary</cell> - <cell align="left" valign="middle">EAVF</cell> - </row> - <row> - <cell align="left" valign="middle">DER</cell> - <cell align="left" valign="middle"><em>[ber_bin, optimize, nif, der]</em></cell> - <cell align="left" valign="middle">EAVF</cell> - <cell align="left" valign="middle">iolist</cell> - <cell align="left" valign="middle">binary</cell> - <cell align="left" valign="middle">EAVF</cell> - </row> - - - <tcaption>The output / input formats for different combinations of compile options.</tcaption> - </table> - <p> - Encode / decode speed comparison in one user case for the above - alternatives (except <c>DER</c>) is showed in the table below. The - <c>DER</c> alternatives are slower than their corresponding - <c>BER</c> alternative. - </p> - - <table> - <row> - <cell align="left" valign="middle"><em>compile options</em></cell> - <cell align="left" valign="middle"><em>encode time</em></cell> - <cell align="left" valign="middle"><em>decode time</em></cell> - </row> - <row> - <cell align="left" valign="middle">[ber]</cell> - <cell align="left" valign="middle">120</cell> - <cell align="left" valign="middle">162</cell> - </row> - <row> - <cell align="left" valign="middle">[ber_bin]</cell> - <cell align="left" valign="middle">124</cell> - <cell align="left" valign="middle">154</cell> - </row> - <row> - <cell align="left" valign="middle"><em>[ber_bin, optimize]</em></cell> - <cell align="left" valign="middle">50</cell> - <cell align="left" valign="middle">78</cell> - </row> - <row> - <cell align="left" valign="middle"><em>[ber_bin, optimize, driver]</em></cell> - <cell align="left" valign="middle">50</cell> - <cell align="left" valign="middle">62</cell> - </row> - <row> - <cell align="left" valign="middle">[per]</cell> - <cell align="left" valign="middle">141</cell> - <cell align="left" valign="middle">133</cell> - </row> - <row> - <cell align="left" valign="middle"><em>[per_bin]</em></cell> - <cell align="left" valign="middle">125</cell> - <cell align="left" valign="middle">123</cell> - </row> - <row> - <cell align="left" valign="middle"><em>[per_bin, optimize]</em></cell> - <cell align="left" valign="middle">77</cell> - <cell align="left" valign="middle">72</cell> - </row> - <row> - <cell align="left" valign="middle"><em>[uper_bin]</em></cell> - <cell align="left" valign="middle">97</cell> - <cell align="left" valign="middle">104</cell> - </row> - <tcaption> - One example of difference in speed for the compile option alternatives. - </tcaption> - </table> - - <p> - The compile options <c>ber</c>, <c>per</c> and - <c>driver</c> are kept for backwards compatibility and should not be - used in new code. The nif implementation which replaces the linked-in - driver has been shown to be about 5-15% faster. - </p> - <p> - You are strongly recommended to use the appropriate alternative - of the bold typed options. The <c>optimize</c> and - <c>nif</c> options does not affect the encode or decode - result, just the time spent in run-time. When <c>ber_bin</c> and - <c>nif</c> or <c>per_bin</c> and <c>optimize</c> is - combined the C-code nif is used in chosen parts of encode / - decode procedure. - </p> - <table> - <row> - <cell align="left" valign="middle"><em>Compile options, allowed combinations</em></cell> - <cell align="left" valign="middle"><em>use of nif</em></cell> - </row> - <row> - <cell align="left" valign="middle">[ber]</cell> - <cell align="left" valign="middle">no</cell> - </row> - <row> - <cell align="left" valign="middle">[ber_bin]</cell> - <cell align="left" valign="middle">no</cell> - </row> - <row> - <cell align="left" valign="middle"><em>[ber_bin, optimize]</em></cell> - <cell align="left" valign="middle">no</cell> - </row> - <row> - <cell align="left" valign="middle"><em>[ber_bin, optimize, nif]</em></cell> - <cell align="left" valign="middle">yes</cell> - </row> - <row> - <cell align="left" valign="middle">[per]</cell> - <cell align="left" valign="middle">no</cell> - </row> - <row> - <cell align="left" valign="middle"><em>[per_bin]</em></cell> - <cell align="left" valign="middle">no</cell> - </row> - <row> - <cell align="left" valign="middle"><em>[per_bin, optimize]</em></cell> - <cell align="left" valign="middle">yes</cell> - </row> - <row> - <cell align="left" valign="middle"><em>[uper_bin]</em></cell> - <cell align="left" valign="middle">no</cell> - </row> - - <row> - <cell align="left" valign="middle">[(ber), der]</cell> - <cell align="left" valign="middle">no</cell> - </row> - <row> - <cell align="left" valign="middle">[ber_bin, der]</cell> - <cell align="left" valign="middle">no</cell> - </row> - <row> - <cell align="left" valign="middle"><em>[ber_bin, optimize, der]</em></cell> - <cell align="left" valign="middle">no</cell> - </row> - <row> - <cell align="left" valign="middle"><em>[ber_bin, optimize, nif, der]</em></cell> - <cell align="left" valign="middle">yes</cell> - </row> - - - <tcaption>When the ASN1 nif is used.</tcaption> - </table> - - </section> - <section> <title>Run-time Functions</title> <p>A brief description of the major functions is given here. For a complete description of each function see @@ -719,9 +419,9 @@ asn1rt:decode('H323-MESSAGES','SomeChoiceType',Bytes). </pre> 'H323-MESSAGES':encode('SomeChoiceType',{call,"octetstring"}). 'H323-MESSAGES':decode('SomeChoiceType',Bytes). </pre> <p>The asn1 nif is enabled in two occasions: encoding of - asn1 values when the asn1 spec is compiled with <c>per_bin</c> and - <c>optimize</c> or decode of encoded asn1 values when the asn1 spec is - compiled with <c>ber_bin</c>, <c>optimize</c> and <c>nif</c>. In + asn1 values when the asn1 spec is compiled with <c>per</c> and + or decode of encoded asn1 values when the asn1 spec is + compiled with <c>ber</c>. In those cases the nif will be loaded automatically at the first call to <c>encode</c>/<c>decode</c>. If one doesn't want the performance overhead of the nif being loaded at the first call it is possible @@ -868,26 +568,6 @@ Operational ::= BOOLEAN --ASN.1 definition </pre> <pre> Val = true, {ok,Bytes}=asn1rt:encode(MyModule,'Operational',Val), </pre> - <p>For historical reasons it is also possible to assign ASN.1 values - in Erlang using a tuple notation - with type and value as this</p> - <pre> -Val = {'Operational',true} </pre> - <warning> - <marker id="warning"></marker> - <p>The tuple notation, <c>{Typename, Value}</c> is only kept - because of backward compatibility and may be withdrawn in a - future release. If the notation is used the <c>Typename</c> - element must be spelled correctly, otherwise a run-time error - will occur. - </p> - <p>If the ASN.1 module is compiled with the flags - <c>per_bin</c> or <c>ber_bin</c> and <c>optimize</c> it is not - allowed to use the tuple notation. That possibility has been - removed due to performance reasons. Neither is it allowed to - use the <c>{ComponentName,Value}</c> notation in case of a - SEQUENCE or SET type.</p> - </warning> <p>Below follows a description of how values of each type can be represented in Erlang. </p> @@ -1149,7 +829,7 @@ TextFileVal2 = [88,76,55,44,99,121 .......... a lot of characters here ....] The following example shows how it works:</p> <p>In a file <c>PrimStrings.asn1</c> the type <c>BMP</c> is defined as <br></br> -<c>BMP ::= BMPString</c> then using BER encoding (<c>ber_bin</c> +<c>BMP ::= BMPString</c> then using BER encoding (<c>ber</c> option)the input/output format will be:</p> <pre> 1> <input>{ok,Bytes1} = asn1rt:encode('PrimStrings','BMP',[{0,0,53,53},{0,0,45,56}]).</input> @@ -1174,9 +854,9 @@ TextFileVal2 = [88,76,55,44,99,121 .......... a lot of characters here ....] <c>utf8_list_to_binary</c>, are in the <c>asn1rt</c> module. In the example below we assume an asn1 definition <c>UTF ::= UTF8String</c> in a module <c>UTF.asn</c>:</p> <pre> -1> <input>asn1ct:compile('UTF',[ber_bin]).</input> +1> <input>asn1ct:compile('UTF',[ber]).</input> Erlang ASN.1 version "1.4.3.3" compiling "UTF.asn" -Compiler Options: [ber_bin] +Compiler Options: [ber] --{generated,"UTF.asn1db"}-- --{generated,"UTF.erl"}-- ok @@ -1287,14 +967,6 @@ Pdu ::= SEQUENCE { <p>Values can be assigned in Erlang as shown below:</p> <pre> MyPdu = #'Pdu'{a=22,b=77.99,c={0,1,2,3,4},d='NULL'}. </pre> -<note> - <p> - In very early versions of the asn1 compiler it was also possible to - specify the values of the components in - a SEQUENCE or a SET as a list of tuples <c>{ComponentName,Value}</c>. - This is no longer supported. - </p> -</note> <p>The decode functions will return a record as result when decoding a <c>SEQUENCE</c> or a <c>SET</c>. <marker id="DEFAULT"></marker> @@ -1739,12 +1411,9 @@ SS ::= SET { 1> <input>Val = 'Values':tt().</input> {'TT',77,["kalle","kula"]} 2> <input>{ok,Bytes} = 'Values':encode('TT',Val).</input> -{ok,["0", - [18], - [[[128],[1],"M"],["\\241","\\r",[[[4],[5],"kalle"],[[4],[4],"kula"]]]]]} -3> <input>FlatBytes = lists:flatten(Bytes).</input> -[48,18,128,1,77,161,13,4,5,107,97,108,108,101,4,4,107,117,108,97] -4> <input>'Values':decode('TT',FlatBytes).</input> +{ok,<<48,18,128,1,77,161,13,4,5,107,97,108,108,101,4,4, + 107,117,108,97>>} +4> <input>'Values':decode('TT',Bytes).</input> {ok,{'TT',77,["kalle","kula"]}} 5> </pre> diff --git a/lib/asn1/doc/src/asn1ct.xml b/lib/asn1/doc/src/asn1ct.xml index 3be58cbc8e..9a9bb7ec1b 100644 --- a/lib/asn1/doc/src/asn1ct.xml +++ b/lib/asn1/doc/src/asn1ct.xml @@ -41,6 +41,19 @@ encode/decode functions. There are also some generic functions which can be used in during development of applications which handles ASN.1 data (encoded as BER or PER).</p> + <note> + <p>In R16, the options have been simplified. The back-end is chosen + using one of the options <c>ber</c>, <c>per</c>, or <c>uper</c>. + The options <c>optimize</c>, <c>nif</c>, and <c>driver</c> options + are no longer necessary (and the ASN.1 compiler will print a + warning if they are used). The options <c>ber_bin</c>, <c>per_bin</c>, + and <c>uper_bin</c> options will still work, but will print a warning. + </p> + <p>Another change in R16 is that the generated <c>encode/2</c> + function (and <c>asn1rt:encode/3</c>) always returns a binary. + The <c>encode/2</c> function for the BER back-end used to return + an iolist.</p> + </note> </description> <funcs> <func> @@ -50,9 +63,9 @@ <type> <v>Asn1module = atom() | string()</v> <v>Options = [Option| OldOption]</v> - <v>Option = ber_bin | per_bin | uper_bin | der | compact_bit_string | - noobj | {n2n, EnumTypeName} |{outdir, Dir} | {i, IncludeDir} | optimize | - nif | asn1config | undec_rest | {inline, OutputName} | inline | + <v>Option = ber | per | uper | der | compact_bit_string | + noobj | {n2n, EnumTypeName} |{outdir, Dir} | {i, IncludeDir} | + asn1config | undec_rest | {inline, OutputName} | inline | {macro_name_prefix, Prefix} | {record_name_prefix, Prefix} | verbose | warnings_as_errors</v> <v>OldOption = ber | per</v> <v>Reason = term()</v> @@ -112,7 +125,7 @@ File3.asn </pre> section in users guide</seealso>. Available options are: </p> <taglist> - <tag><c>ber | ber_bin | per | per_bin | uper_bin</c></tag> + <tag><c>ber | per | uper</c></tag> <item> <p> The encoding rule to be used. The supported encoding rules @@ -120,23 +133,12 @@ File3.asn </pre> PER aligned (Packed Encoding Rules) and PER unaligned. If the encoding rule option is omitted <c>ber</c> is the default. - The <c>per_bin</c> option means the aligned - variant. To use the unaligned variant the <c>uper_bin</c> - option has to be used. </p> <p> The generated Erlang module always gets the same name as the ASN.1 module and as a consequence of this only one encoding rule per ASN.1 module can be used at runtime. </p> - <p> - The <c>ber_bin</c> and <c>per_bin</c> options are - equivalent with the <c>OldOptions</c> <c>ber</c> and <c>per</c> - with the difference that the generated encoding/decoding - functions take advantage of the bit syntax, which in most - cases increases the performance considerably. The result - from encoding is a binary or an iolist. - </p> </item> <tag><c>der</c></tag> <item> @@ -144,7 +146,7 @@ File3.asn </pre> By this option the Distinguished Encoding Rules (DER) is chosen. DER is regarded as a specialized variant of the BER encoding rule, therefore the <c>der</c> option only makes sense together - with the <c>ber</c> or <c>ber_bin</c> option. + with the <c>ber</c> option. This option sometimes adds sorting and value checks when encoding, which implies a slower encoding. The decoding routines are the same @@ -206,28 +208,6 @@ Binary = binary() shall be placed. If omitted the files are placed in the current directory.</p> </item> - <tag><c>optimize</c></tag> - <item> - <p>This option is only valid together with one of the - <c>per_bin</c> - or <c>ber_bin</c> option. It gives time optimized code - generated and it uses another runtime module and - in the <c>per_bin</c> case a nif. The result - in the <c>per_bin</c> case from an encode when compiled - with this option will be a binary.</p> - </item> - <tag><c>driver</c></tag> - <item> - <p>As of R15B this means the same as the <c>nif</c> option. Kept for - backwards compatability reasons.</p> - </item> - <tag><c>nif</c></tag> - <item> - <p>Option valid together with <c>ber_bin</c> and <c>optimize</c> - options. It enables the use of several nifs that gives faster - encode and decode. Nifs are only enabled by the explicit use of - the option <c>nif</c></p> - </item> <tag><c>asn1config</c></tag> <item> <p>When one of the specialized decodes, exclusive or @@ -270,10 +250,6 @@ Binary = binary() <c>{export, [atom()]}</c> or <c>{export_all, true}</c> option are provided. The list of atoms are names of chosen asn1 specs from the <c>.set.asn</c> file. </p> - <p>When used together with <c>nif</c> for <c>ber_bin</c>, the - asn1 nifs will be used if the <c>asn1rt_nif</c> module is - available. If it is not available, a slower erlang fallback - will be used.</p> </item> <tag><c>inline</c></tag> <item> @@ -327,13 +303,12 @@ Binary = binary() <type> <v>Module = Type = atom()</v> <v>Value = term()</v> - <v>Bytes = [Int] when integer(Int), Int >= 0, Int =< 255</v> + <v>Bytes = binary()</v> <v>Reason = term()</v> </type> <desc> <p>Encodes <c>Value</c> of <c>Type</c> defined in the ASN.1 module - <c>Module</c>. Returns a list of bytes if successful. To get as fast execution as - possible the + <c>Module</c>. To get as fast execution as possible the encode function only performs rudimentary tests that the input <c>Value</c> is a correct instance of <c>Type</c>. The length of strings is for example @@ -348,10 +323,10 @@ Binary = binary() <type> <v>Module = Type = atom()</v> <v>Value = Reason = term()</v> - <v>Bytes = [Int] when integer(Int), Int >= 0, Int =< 255</v> + <v>Bytes = binary()</v> </type> <desc> - <p>Decodes <c>Type</c> from <c>Module</c> from the list of bytes + <p>Decodes <c>Type</c> from <c>Module</c> from the binary <c>Bytes</c>. Returns <c>{ok, Value}</c> if successful.</p> </desc> </func> diff --git a/lib/asn1/doc/src/asn1rt.xml b/lib/asn1/doc/src/asn1rt.xml index 0c3c257189..f2cac0c9e7 100644 --- a/lib/asn1/doc/src/asn1rt.xml +++ b/lib/asn1/doc/src/asn1rt.xml @@ -47,35 +47,34 @@ <type> <v>Module = Type = atom()</v> <v>Value = Reason = term()</v> - <v>Bytes = binary | [Int] when integer(Int), Int >= 0, Int =< 255 | binary</v> + <v>Bytes = binary</v> </type> <desc> - <p>Decodes <c>Type</c> from <c>Module</c> from the list of bytes or - binary <c>Bytes</c>. If the module is compiled with <c>ber_bin</c> - or <c>per_bin</c> option <c>Bytes</c> must be a binary. + <p>Decodes <c>Type</c> from <c>Module</c> from the binary <c>Bytes</c>. Returns <c>{ok,Value}</c> if successful.</p> </desc> </func> <func> - <name>encode(Module,Type,Value)-> {ok,BinOrList} | {error,Reason}</name> + <name>encode(Module,Type,Value)-> {ok,Bytes} | {error,Reason}</name> <fsummary>Encode an ASN.1 value.</fsummary> <type> <v>Module = Type = atom()</v> <v>Value = term()</v> - <v>BinOrList = Bytes | binary()</v> - <v>Bytes = [Int|binary|Bytes] when integer(Int), Int >= 0, Int =< 255</v> + <v>Bytes = binary</v> <v>Reason = term()</v> </type> <desc> <p>Encodes <c>Value</c> of <c>Type</c> defined in the ASN.1 module <c>Module</c>. Returns a possibly nested list of bytes and or binaries - if successful. If <c>Module</c> was compiled with the options <c>per_bin</c> and <c>optimize</c> the result is a binary. To get as - fast execution as possible the + if successful. To get as fast execution as possible the encode function only performs rudimentary tests that the input <c>Value</c> is a correct instance of <c>Type</c>. The length of strings is for example not always checked. </p> + <note> + <p>Starting in R16, <c>Bytes</c> is always a binary.</p> + </note> </desc> </func> @@ -95,28 +94,6 @@ </func> <func> - <name>load_driver() -> ok | {error,Reason}</name> - <fsummary>Loads the linked-in driver. (deprecated)</fsummary> - <type> - <v>Reason = term()</v> - </type> - <desc> - <p>This function is obsolete and will be removed in R16A</p> - </desc> - </func> - - <func> - <name>unload_driver() -> ok | {error,Reason}</name> - <fsummary>Unloads the linked-in driver. (deprecated)</fsummary> - <type> - <v>Reason = term()</v> - </type> - <desc> - <p>This function is obsolete and will be removed in R16A</p> - </desc> - </func> - - <func> <name>utf8_binary_to_list(UTF8Binary) -> {ok,UnicodeList} | {error,Reason}</name> <fsummary>Transforms an utf8 encoded binary to a unicode list.</fsummary> <type> diff --git a/lib/asn1/doc/src/notes.xml b/lib/asn1/doc/src/notes.xml index 5ca86130a1..72b496caf7 100644 --- a/lib/asn1/doc/src/notes.xml +++ b/lib/asn1/doc/src/notes.xml @@ -483,7 +483,7 @@ ENUMERATION type, the compilation will be terminated with an error code.<br/> Below follows an example on how to use the option from the command line with <c>erlc</c>:<br/> - <c>erlc -bper_bin +optimize +driver +"{n2n,'CauseMisc'}" +"{n2n,'CausePcl'}" MyModyle.asn</c> + <c>erlc -bper+"{n2n,'CauseMisc'}" +"{n2n,'CausePcl'}" MyModyle.asn</c> </p> <p> Own Id: OTP-8136 Aux Id: seq11347 </p> diff --git a/lib/asn1/src/Makefile b/lib/asn1/src/Makefile index 4bd49aa93b..8d9422144e 100644 --- a/lib/asn1/src/Makefile +++ b/lib/asn1/src/Makefile @@ -52,10 +52,9 @@ CT_MODULES= \ asn1ct_gen_per_rt2ct \ asn1ct_name \ asn1ct_constructed_per \ - asn1ct_constructed_ber \ - asn1ct_gen_ber \ asn1ct_constructed_ber_bin_v2 \ asn1ct_gen_ber_bin_v2 \ + asn1ct_imm \ asn1ct_value \ asn1ct_tok \ asn1ct_parser2 \ @@ -63,7 +62,6 @@ CT_MODULES= \ RT_MODULES= \ asn1rt \ - asn1rt_per_bin \ asn1rt_ber_bin \ asn1rt_ber_bin_v2 \ asn1rt_per_bin_rt2ct \ @@ -166,11 +164,32 @@ release_spec: opt release_docs_spec: +# +# Dependencies +# - - - - - - - +$(EBIN)/asn1_app.beam: asn1_app.erl +$(EBIN)/asn1_db.beam: asn1_db.erl +$(EBIN)/asn1ct.beam: asn1ct.erl asn1_records.hrl +$(EBIN)/asn1ct_check.beam: asn1ct_check.erl asn1_records.hrl +$(EBIN)/asn1ct_constructed_ber_bin_v2.beam: asn1ct_constructed_ber_bin_v2.erl \ + asn1_records.hrl +$(EBIN)/asn1ct_constructed_per.beam: asn1ct_constructed_per.erl asn1_records.hrl +$(EBIN)/asn1ct_gen.beam: asn1ct_gen.erl asn1_records.hrl +$(EBIN)/asn1ct_gen_ber_bin_v2.beam: asn1ct_gen_ber_bin_v2.erl asn1_records.hrl +$(EBIN)/asn1ct_gen_per.beam: asn1ct_gen_per.erl asn1_records.hrl +$(EBIN)/asn1ct_gen_per_rt2ct.beam: asn1ct_gen_per_rt2ct.erl asn1_records.hrl +$(EBIN)/asn1ct_imm.beam: asn1ct_imm.erl +$(EBIN)/asn1ct_name.beam: asn1ct_name.erl +$(EBIN)/asn1ct_parser2.beam: asn1ct_parser2.erl asn1_records.hrl +$(EBIN)/asn1ct_pretty_format.beam: asn1ct_pretty_format.erl +$(EBIN)/asn1ct_table.beam: asn1ct_table.erl +$(EBIN)/asn1ct_tok.beam: asn1ct_tok.erl +$(EBIN)/asn1ct_value.beam: asn1ct_value.erl asn1_records.hrl +$(EBIN)/asn1rt.beam: asn1rt.erl +$(EBIN)/asn1rt_ber_bin.beam: asn1rt_ber_bin.erl asn1_records.hrl +$(EBIN)/asn1rt_ber_bin_v2.beam: asn1rt_ber_bin_v2.erl +$(EBIN)/asn1rt_check.beam: asn1rt_check.erl +$(EBIN)/asn1rt_nif.beam: asn1rt_nif.erl +$(EBIN)/asn1rt_per_bin_rt2ct.beam: asn1rt_per_bin_rt2ct.erl asn1_records.hrl +$(EBIN)/asn1rt_uper_bin.beam: asn1rt_uper_bin.erl asn1_records.hrl diff --git a/lib/asn1/src/asn1.app.src b/lib/asn1/src/asn1.app.src index 09144ba2f7..64b33a8a30 100644 --- a/lib/asn1/src/asn1.app.src +++ b/lib/asn1/src/asn1.app.src @@ -3,7 +3,6 @@ {vsn, "%VSN%"}, {modules, [ asn1rt, - asn1rt_per_bin, asn1rt_per_bin_rt2ct, asn1rt_uper_bin, asn1rt_ber_bin, diff --git a/lib/asn1/src/asn1ct.erl b/lib/asn1/src/asn1ct.erl index 8e971a1c76..90882462ac 100644 --- a/lib/asn1/src/asn1ct.erl +++ b/lib/asn1/src/asn1ct.erl @@ -85,14 +85,8 @@ compile(File) -> compile(File,[]). -compile(File,Options) when is_list(Options) -> - case lists:member(driver, Options) of %% remove me in R16A! - true -> - io:format("Warning: driver option is obsolete and will be removed in R16A, use nif instead!"); - false -> - ok - end, - Options1 = optimize_ber_bin(Options), +compile(File, Options0) when is_list(Options0) -> + Options1 = translate_options(Options0), Options2 = includes(File,Options1), Includes = strip_includes(Options2), in_process(fun() -> compile_proc(File, Includes, Options2) end). @@ -852,8 +846,8 @@ generate({true,{M,_Module,GenTOrV}},OutFile,EncodingRule,Options) -> debug_off(Options), put(compact_bit_string,false), erase(encoding_options), - erase(tlv_format), % used in ber_bin, optimize - erase(class_default_type),% used in ber_bin, optimize + erase(tlv_format), % used in ber + erase(class_default_type),% used in ber asn1ct_table:delete(check_functions), case Result of {error,_} -> @@ -876,14 +870,13 @@ parse_and_save(Module,S) -> Options = S#state.options, SourceDir = S#state.sourcedir, Includes = [I || {i,I} <-Options], - Options1 = optimize_ber_bin(Options), - + case get_input_file(Module,[SourceDir|Includes]) of %% search for asn1 source {file,SuffixedASN1source} -> - case dbfile_uptodate(SuffixedASN1source,Options1) of + case dbfile_uptodate(SuffixedASN1source,Options) of false -> - parse_and_save1(S,SuffixedASN1source,Options1,Includes); + parse_and_save1(S,SuffixedASN1source,Options,Includes); _ -> ok end; Err -> @@ -1065,9 +1058,9 @@ get_file_list1(Stream,Dir,Includes,Acc) -> end. get_rule(Options) -> - case [Rule ||Rule <-[per,ber,ber_bin,ber_bin_v2,per_bin,uper_bin], - Opt <- Options, - Rule==Opt] of + case [Rule || Rule <- [ber,per,uper], + Opt <- Options, + Rule =:= Opt] of [Rule] -> Rule; [Rule|_] -> @@ -1079,19 +1072,34 @@ get_rule(Options) -> get_runtime_mod(Options) -> RtMod1= case get_rule(Options) of - per -> ["asn1rt_per_bin.erl"]; - ber -> ["asn1rt_ber_bin.erl"]; - per_bin -> - case lists:member(optimize,Options) of - true -> ["asn1rt_per_bin_rt2ct.erl"]; - _ -> ["asn1rt_per_bin.erl"] - end; - ber_bin -> ["asn1rt_ber_bin.erl"]; - ber_bin_v2 -> ["asn1rt_ber_bin_v2.erl"]; - uper_bin -> ["asn1rt_uper_bin.erl"] + per -> "asn1rt_per_bin_rt2ct.erl"; + ber -> ["asn1rt_ber_bin_v2.erl"]; + uper -> ["asn1rt_uper_bin.erl"] end, RtMod1++["asn1rt_check.erl","asn1rt.erl"]. - + +%% translate_options(NewOptions) -> OldOptions +%% Translate the new option names to the old option name. +%% FIXME. We should rewrite all code to handle the new option names. + +translate_options([ber_bin|T]) -> + io:format("Warning: The option 'ber_bin' is now called 'ber'.\n"), + [ber|translate_options(T)]; +translate_options([per_bin|T]) -> + io:format("Warning: The option 'per_bin' is now called 'per'.\n"), + [per|translate_options(T)]; +translate_options([uper_bin|T]) -> + io:format("Warning: The option 'uper_bin' is now called 'uper'.\n"), + translate_options([uper|T]); +translate_options([nif|T]) -> + io:format("Warning: The option 'nif' is no longer needed.\n"), + translate_options(T); +translate_options([optimize|T]) -> + io:format("Warning: The option 'optimize' is no longer needed.\n"), + translate_options(T); +translate_options([H|T]) -> + [H|translate_options(T)]; +translate_options([]) -> []. erl_compile(OutFile,Options) -> % io:format("Options:~n~p~n",[Options]), @@ -1115,7 +1123,6 @@ remove_asn_flags(Options) -> X /= optimize, X /= compact_bit_string, X /= debug, - X /= keyed_list, X /= asn1config, X /= record_name_prefix]. @@ -1125,12 +1132,6 @@ debug_on(Options) -> put(asndebug,true); _ -> true - end, - case lists:member(keyed_list,Options) of - true -> - put(asn_keyed_list,true); - _ -> - true end. igorify_options(Options) -> @@ -1151,8 +1152,7 @@ generated_file(Name,Options) -> end. debug_off(_Options) -> - erase(asndebug), - erase(asn_keyed_list). + erase(asndebug). outfile(Base, Ext, Opts) -> @@ -1168,13 +1168,6 @@ outfile(Base, Ext, Opts) -> lists:concat([Obase,".",Ext]) end. -optimize_ber_bin(Options) -> - case {lists:member(optimize,Options),lists:member(ber_bin,Options)} of - {true,true} -> - [ber_bin_v2|Options--[ber_bin]]; - _ -> Options - end. - includes(File,Options) -> Options2 = include_append(".", Options), Options3 = include_append(filename:dirname(File), Options2), @@ -1284,12 +1277,7 @@ make_erl_options(Opts) -> Defines) ++ case OutputType of undefined -> [ber]; % temporary default (ber when it's ready) - ber -> [ber]; - ber_bin -> [ber_bin]; - ber_bin_v2 -> [ber_bin_v2]; - per -> [per]; - per_bin -> [per_bin]; - uper_bin -> [uper_bin] + _ -> [OutputType] % pass through end, Options++[errors, {cwd, Cwd}, {outdir, Outdir}| @@ -1400,8 +1388,7 @@ test_value(Module, Type, Value) -> in_process(fun() -> case catch encode(Module, Type, Value) of {ok, Bytes} -> - M = to_atom(Module), - NewBytes = prepare_bytes(M:encoding_rule(), Bytes), + NewBytes = prepare_bytes(Bytes), case decode(Module, Type, NewBytes) of {ok, Value} -> {ok, {Module, Type, Value}}; @@ -1452,18 +1439,8 @@ check(Module, Includes) -> end end. -to_atom(Term) when is_list(Term) -> list_to_atom(Term); -to_atom(Term) when is_atom(Term) -> Term. - -prepare_bytes(ber, Bytes) -> lists:flatten(Bytes); -prepare_bytes(ber_bin, Bytes) when is_binary(Bytes) -> Bytes; -prepare_bytes(ber_bin, Bytes) -> list_to_binary(Bytes); -prepare_bytes(ber_bin_v2, Bytes) when is_binary(Bytes) -> Bytes; -prepare_bytes(ber_bin_v2, Bytes) -> list_to_binary(Bytes); -prepare_bytes(per, Bytes) -> lists:flatten(Bytes); -prepare_bytes(per_bin, Bytes) when is_binary(Bytes) -> Bytes; -prepare_bytes(per_bin, Bytes) -> list_to_binary(Bytes); -prepare_bytes(uper_bin, Bytes) -> Bytes. +prepare_bytes(Bytes) when is_binary(Bytes) -> Bytes; +prepare_bytes(Bytes) -> list_to_binary(Bytes). vsn() -> ?vsn. @@ -1504,7 +1481,7 @@ specialized_decode_prepare(Erule,M,TsAndVs,Options) -> end. %% Reads the configuration file if it exists and stores information %% about partial decode and incomplete decode -partial_decode_prepare(ber_bin_v2,M,TsAndVs,Options) when is_tuple(TsAndVs) -> +partial_decode_prepare(ber,M,TsAndVs,Options) when is_tuple(TsAndVs) -> %% read configure file ModName = diff --git a/lib/asn1/src/asn1ct_check.erl b/lib/asn1/src/asn1ct_check.erl index 59e82b7a57..fe1b2e14a8 100644 --- a/lib/asn1/src/asn1ct_check.erl +++ b/lib/asn1/src/asn1ct_check.erl @@ -61,13 +61,13 @@ -define(TAG_PRIMITIVE(Num), case S#state.erule of - ber_bin_v2 -> + ber -> #tag{class='UNIVERSAL',number=Num,type='IMPLICIT',form=0}; _ -> [] end). -define(TAG_CONSTRUCTED(Num), case S#state.erule of - ber_bin_v2 -> + ber -> #tag{class='UNIVERSAL',number=Num,type='IMPLICIT',form=32}; _ -> [] end). @@ -3262,7 +3262,7 @@ check_type(S=#state{recordtopname=TopName},Type,Ts) when is_record(Ts,type) -> inlined=IsInlined}, TestFun = fun(Tref) -> - {_,MaybeChoice} = get_referenced_type(S,Tref), + MaybeChoice = get_non_typedef(S, Tref), case catch((MaybeChoice#typedef.typespec)#type.def) of {'CHOICE',_} -> maybe_illicit_implicit_tag(choice,Tag); @@ -3347,7 +3347,7 @@ check_type(S=#state{recordtopname=TopName},Type,Ts) when is_record(Ts,type) -> TempNewDef#newt{ type = check_externaltypereference(S,NewExt), tag = case S#state.erule of - ber_bin_v2 -> + ber -> merge_tags(Ct,RefType#type.tag); _ -> Ct @@ -3617,6 +3617,14 @@ check_type(S=#state{recordtopname=TopName},Type,Ts) when is_record(Ts,type) -> check_type(_S,Type,Ts) -> exit({error,{asn1,internal_error,Type,Ts}}). +get_non_typedef(S, Tref0) -> + case get_referenced_type(S, Tref0) of + {_,#typedef{typespec=#type{def=#'Externaltypereference'{}=Tref}}} -> + get_non_typedef(S, Tref); + {_,Type} -> + Type + end. + %% tablecinf_choose. A SEQUENCE or SET may be inserted in another %% SEQUENCE or SET by the COMPONENTS OF directive. If this inserted %% type is a referenced type that already has been checked it already @@ -5289,7 +5297,7 @@ iof_associated_type(S,[]) -> AssociateSeq = iof_associated_type1(S,[]), Tag = case S#state.erule of - ber_bin_v2 -> + ber -> [?TAG_CONSTRUCTED(?N_INSTANCE_OF)]; _ -> [] end, @@ -5320,7 +5328,7 @@ iof_associated_type1(S,C) -> end, {ObjIdTag,C1TypeTag}= case S#state.erule of - ber_bin_v2 -> + ber -> {[{'UNIVERSAL',8}], [#tag{class='UNIVERSAL', number=6, @@ -5551,8 +5559,9 @@ complist_as_tuple(_Per,[],Acc,Ext,_Acc2,ext) -> complist_as_tuple(_Per,[],Acc,Ext,Acc2,root2) -> {lists:reverse(Acc),lists:reverse(Ext),lists:reverse(Acc2)}. -is_erule_per(Erule) -> - lists:member(Erule,[per,per_bin,uper_bin]). +is_erule_per(per) -> true; +is_erule_per(uper) -> true; +is_erule_per(ber) -> false. expand_components(S, [{'COMPONENTS OF',Type}|T]) -> CompList = expand_components2(S,get_referenced_type(S,Type#type.def)), @@ -5641,7 +5650,7 @@ check_set(S,Type,Components) -> {true,_} -> {Sorted,SortedComponents} = sort_components(der,S,NewComponents), {Sorted,TableCInf,SortedComponents}; - {_,PER} when PER =:= per; PER =:= per_bin; PER =:= uper_bin -> + {_,PER} when PER =:= per; PER =:= uper -> {Sorted,SortedComponents} = sort_components(per,S,NewComponents), {Sorted,TableCInf,SortedComponents}; _ -> @@ -5765,7 +5774,7 @@ sort_universal_type(Components) -> decode_type(I) when is_integer(I) -> I; decode_type(T) -> - asn1ct_gen_ber:decode_type(T). + asn1ct_gen_ber_bin_v2:decode_type(T). untagged_choice(_S,[#'ComponentType'{typespec=#type{tag=[],def={'CHOICE',_}}}|_Rest]) -> true; @@ -6884,16 +6893,16 @@ get_taglist(S,{ObjCl,FieldNameList}) when is_record(ObjCl,objectclass), {TypeFieldName,_} when is_atom(TypeFieldName) -> []%should check if allowed end; get_taglist(S,Def) -> - case lists:member(S#state.erule,[ber_bin_v2]) of - false -> + case S#state.erule of + ber -> + []; + _ -> case Def of 'ASN1_OPEN_TYPE' -> % open_type has no UNIVERSAL tag as such []; _ -> [asn1ct_gen:def_to_tag(Def)] - end; - _ -> - [] + end end. get_taglist1(S,[#'ComponentType'{name=_Cname,tags=TagL}|Rest]) when is_list(TagL) -> diff --git a/lib/asn1/src/asn1ct_constructed_ber.erl b/lib/asn1/src/asn1ct_constructed_ber.erl deleted file mode 100644 index 360de77663..0000000000 --- a/lib/asn1/src/asn1ct_constructed_ber.erl +++ /dev/null @@ -1,1596 +0,0 @@ -%% -%% %CopyrightBegin% -%% -%% Copyright Ericsson AB 1997-2011. All Rights Reserved. -%% -%% The contents of this file are subject to the Erlang Public License, -%% Version 1.1, (the "License"); you may not use this file except in -%% compliance with the License. You should have received a copy of the -%% Erlang Public License along with this software. If not, it can be -%% retrieved online at http://www.erlang.org/. -%% -%% Software distributed under the License is distributed on an "AS IS" -%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See -%% the License for the specific language governing rights and limitations -%% under the License. -%% -%% %CopyrightEnd% -%% -%% --module(asn1ct_constructed_ber). - --export([gen_encode_sequence/3]). --export([gen_decode_sequence/3]). --export([gen_encode_set/3]). --export([gen_decode_set/3]). --export([gen_encode_sof/4]). --export([gen_decode_sof/4]). --export([gen_encode_choice/3]). --export([gen_decode_choice/3]). - -%%%% Application internal exports --export([match_tag/2]). - --include("asn1_records.hrl"). - --import(asn1ct_gen, [emit/1,demit/1,get_record_name_prefix/0]). - -% the encoding of class of tag bits 8 and 7 --define(UNIVERSAL, 0). --define(APPLICATION, 16#40). --define(CONTEXT, 16#80). --define(PRIVATE, 16#C0). - -% primitive or constructed encoding % bit 6 --define(PRIMITIVE, 0). --define(CONSTRUCTED, 2#00100000). - - - - -%%=============================================================================== -%%=============================================================================== -%%=============================================================================== -%% Encode/decode SEQUENCE -%%=============================================================================== -%%=============================================================================== -%%=============================================================================== - -gen_encode_sequence(Erules,Typename,D) when is_record(D,type) -> - asn1ct_name:start(), - asn1ct_name:new(term), - asn1ct_name:new(bytes), - - %% if EXTERNAL type the input value must be transformed to - %% ASN1 1990 format - case Typename of - ['EXTERNAL'] -> - emit([" NewVal = asn1rt_check:transform_to_EXTERNAL1990(Val),", - nl]); - _ -> - ok - end, - - {SeqOrSet,TableConsInfo,CompList0} = - case D#type.def of - #'SEQUENCE'{tablecinf=TCI,components=CL} -> - {'SEQUENCE',TCI,CL}; - #'SET'{tablecinf=TCI,components=CL} -> - {'SET',TCI,CL} - end, - %% filter away extensionAdditiongroup markers - CompList = filter_complist(CompList0), - Ext = extensible(CompList), - CompList1 = case CompList of - {Rl1,El,Rl2} -> Rl1 ++ El ++ Rl2; - {Rl,El} -> Rl ++ El; - _ -> CompList - end, - EncObj = - case TableConsInfo of - #simpletableattributes{usedclassfield=Used, - uniqueclassfield=Unique} when Used /= Unique -> - false; - %% ObjectSetRef, name of the object set in constraints - %% - %%{ObjectSetRef,AttrN,N,UniqueFieldName} - #simpletableattributes{objectsetname=ObjectSetRef, - c_name=AttrN, - c_index=N, - usedclassfield=UniqueFieldName, - uniqueclassfield=UniqueFieldName, - valueindex=ValueIndex - } -> - OSDef = - case ObjectSetRef of - {Module,OSName} -> - asn1_db:dbget(Module,OSName); - OSName -> - asn1_db:dbget(get(currmod),OSName) - end, -% io:format("currmod: ~p~nOSName: ~p~nAttrN: ~p~nN: ~p~nUniqueFieldName: ~p~n", -% [get(currmod),OSName,AttrN,N,UniqueFieldName]), - case (OSDef#typedef.typespec)#'ObjectSet'.gen of - true -> -% Val = lists:concat(["?RT_BER:cindex(", -% N+1,",Val,"]), - ObjectEncode = - asn1ct_gen:un_hyphen_var(lists:concat(['Obj', - AttrN])), - emit({ObjectEncode," = ",nl}), - {ObjSetMod,ObjSetName} = - case ObjectSetRef of - {M,O} -> - {{asis,M},O}; - O -> - {"?MODULE",O} - end, - emit({" ",ObjSetMod,":'getenc_",ObjSetName,"'(",{asis,UniqueFieldName}, - ", ",nl}), -% emit({indent(35),"?RT_BER:cindex(",N+1,", Val,", -% {asis,AttrN},")),",nl}), - Length = fun(X,_LFun) when is_atom(X) -> - length(atom_to_list(X)); - (X,_LFun) when is_list(X) -> - length(X); - ({X1,X2},LFun) -> - LFun(X1,LFun) + LFun(X2,LFun) - end, - emit([indent(10+Length(ObjectSetRef,Length)), - "value_match(",{asis,ValueIndex},",", - "?RT_BER:cindex(",N+1,",Val,", - {asis,AttrN},"))),",nl]), - notice_value_match(), - {AttrN,ObjectEncode}; - _ -> - false - end; - _ -> - case D#type.tablecinf of - [{objfun,_}|_] -> - %% when the simpletableattributes was at an - %% outer level and the objfun has been passed - %% through the function call - {"got objfun through args","ObjFun"}; - _ -> - false - end - end, - - gen_enc_sequence_call(Erules,Typename,CompList1,1,Ext,EncObj), - - MyTag = [X#tag{class=asn1ct_gen_ber:decode_class(X#tag.class)}|| X <- D#type.tag] - ++ - [#tag{class = asn1ct_gen_ber:decode_class('UNIVERSAL'), - number = asn1ct_gen_ber:decode_type(SeqOrSet), - form = ?CONSTRUCTED, - type = 'IMPLICIT'}], - emit([nl," BytesSoFar = "]), - case SeqOrSet of - 'SET' when (D#type.def)#'SET'.sorted == dynamic -> - emit("asn1rt_check:dynamicsort_SET_components(["), - mkvlist(asn1ct_name:all(encBytes)), - emit(["]),",nl]); - _ -> - emit("["), - mkvlist(asn1ct_name:all(encBytes)), - emit(["],",nl]) - end, - emit(" LenSoFar = "), - case asn1ct_name:all(encLen) of - [] -> emit("0"); - AllLengths -> - mkvplus(AllLengths) - end, - emit([",",nl]), -% emit(["{TagBytes,Len} = ?RT_BER:encode_tags(TagIn ++ ", - emit([" ?RT_BER:encode_tags(TagIn ++ ", - {asis,MyTag},", BytesSoFar, LenSoFar).",nl]). - - -gen_decode_sequence(Erules,Typename,D) when is_record(D,type) -> - asn1ct_name:start(), - asn1ct_name:new(tag), - #'SEQUENCE'{tablecinf=TableConsInfo,components=CList0} = D#type.def, - - %% filter away extensionAdditiongroup markers - CList = filter_complist(CList0), - - Ext = extensible(CList), - {CompList,CompList2} = case CList of - {Rl1,El,Rl2} -> {Rl1 ++ El ++ Rl2,CList}; - {Rl,El} -> {Rl ++ El, Rl ++ El}; - _ -> {CList,CList} - end, - - emit([" %%-------------------------------------------------",nl]), - emit([" %% decode tag and length ",nl]), - emit([" %%-------------------------------------------------",nl]), - - asn1ct_name:new(rb), - MyTag = [X#tag{class=asn1ct_gen_ber:decode_class(X#tag.class)}|| X <- D#type.tag] - ++ - [#tag{class = asn1ct_gen_ber:decode_class('UNIVERSAL'), - number = asn1ct_gen_ber:decode_type('SEQUENCE'), - form = ?CONSTRUCTED, - type = 'IMPLICIT'}], - emit([" {{_,",asn1ct_gen_ber:unused_var("Len",D#type.def),"},",{next,bytes},",",{curr,rb}, - "} = ?RT_BER:check_tags(TagIn ++ ",{asis,MyTag},", ", - {curr,bytes},", OptOrMand), ",nl]), - asn1ct_name:new(bytes), - asn1ct_name:new(len), - - case CompList of - [] -> true; - _ -> - emit({"{",{next,bytes}, - ",RemBytes} = ?RT_BER:split_list(", - {curr,bytes}, - ",", {prev,len},"),",nl}), - asn1ct_name:new(bytes) - end, - - {DecObjInf,UniqueFName,ValueIndex} = - case TableConsInfo of - #simpletableattributes{objectsetname=ObjectSet, - c_name=AttrN, - usedclassfield=UniqueFieldName, - uniqueclassfield=UniqueFieldName, - valueindex=ValIndex - } -> - F = fun(#'ComponentType'{typespec=CT})-> - case {asn1ct_gen:get_constraint(CT#type.constraint,componentrelation),CT#type.tablecinf} of -% case {CT#type.constraint,CT#type.tablecinf} of - {no,[{objfun,_}|_R]} -> true; - _ -> false - end - end, - case lists:any(F,CompList) of - %%AttributeName = asn1ct_gen:un_hyphen_var(AttrN), - true -> % when component relation constraint establish - %% relation from a component to another components - %% subtype component - {{AttrN,{deep,ObjectSet,UniqueFieldName, - ValIndex}}, - UniqueFieldName,ValIndex}; - false -> - {{AttrN,ObjectSet},UniqueFieldName,ValIndex} - end; - _ -> - {false,false,false} - end, - RecordName = lists:concat([get_record_name_prefix(),asn1ct_gen:list2rname(Typename)]), - case gen_dec_sequence_call(Erules,Typename,CompList2,Ext,DecObjInf) of - no_terms -> % an empty sequence - emit([nl,nl]), - demit({"Result = "}), %dbg - %% return value as record - asn1ct_name:new(rb), - emit([" {{'",RecordName,"'}, ",{curr,bytes},",",nl," "]), - asn1ct_gen_ber:add_removed_bytes(), - emit(["}.",nl]); - {LeadingAttrTerm,PostponedDecArgs} -> - emit([com,nl,nl]), - case {LeadingAttrTerm,PostponedDecArgs} of - {[],[]} -> - ok; - {_,[]} -> - ok; - {[{ObjSet,LeadingAttr,Term}],PostponedDecArgs} -> - DecObj = asn1ct_gen:un_hyphen_var(lists:concat(['DecObj',LeadingAttr,Term])), - ValueMatch = value_match(ValueIndex,Term), - {ObjSetMod,ObjSetName} = - case ObjSet of - {M,O} -> - {{asis,M},O}; - _ -> - {"?MODULE",ObjSet} - end, - emit([DecObj," =",nl," ",ObjSetMod,":'getdec_",ObjSetName,"'(", -% {asis,UniqueFName},", ",Term,"),",nl}), - {asis,UniqueFName},", ",ValueMatch,"),",nl]), - gen_dec_postponed_decs(DecObj,PostponedDecArgs) - end, - demit({"Result = "}), %dbg - %% return value as record - asn1ct_name:new(rb), - asn1ct_name:new(bytes), - ExtStatus = case Ext of - {ext,_,_} -> ext; - _ -> noext % noext | extensible - end, - emit([" {",{next,bytes},",",{curr,rb},"} = ?RT_BER:restbytes2(RemBytes, ", - {curr,bytes},",",ExtStatus,"),",nl]), - asn1ct_name:new(rb), - case Typename of - ['EXTERNAL'] -> - emit([" OldFormat={'",RecordName, - "', "]), - mkvlist(asn1ct_name:all(term)), - emit(["},",nl]), - emit([" ASN11994Format =",nl, - " asn1rt_check:transform_to_EXTERNAL1994", - "(OldFormat),",nl]), - emit([" {ASN11994Format,",{next,bytes},", "]); - _ -> - emit([" {{'",RecordName,"', "]), - mkvlist(asn1ct_name:all(term)), - emit(["}, ",{next,bytes},", "]) - end, - asn1ct_gen_ber:add_removed_bytes(), - emit(["}.",nl]) - end. - -gen_dec_postponed_decs(_,[]) -> - emit(nl); -gen_dec_postponed_decs(DecObj,[{_Cname,{FirstPFN,PFNList},Term,TmpTerm,_Tag,OptOrMand}|Rest]) -> -% asn1ct_name:new(term), - asn1ct_name:new(tmpterm), - asn1ct_name:new(reason), - - emit({"{",Term,", _, _} = ",nl}), - N = case OptOrMand of - mandatory -> 0; - 'OPTIONAL' -> - emit_opt_or_mand_check(asn1_NOVALUE,TmpTerm), - 6; - {'DEFAULT',Val} -> - emit_opt_or_mand_check(Val,TmpTerm), - 6 - end, - emit({indent(N+3),"case (catch ",DecObj,"(",{asis,FirstPFN}, -% ", ",TmpTerm,", ", {asis,Tag},", ",{asis,PFNList},")) of",nl}), - ", ",TmpTerm,", [], ",{asis,PFNList},")) of",nl}), - emit({indent(N+6),"{'EXIT', ",{curr,reason},"} ->",nl}), - emit({indent(N+9),"exit({'Type not compatible with table constraint',", - {curr,reason},"});",nl}), - emit({indent(N+6),{curr,tmpterm}," ->",nl}), - emit({indent(N+9),{curr,tmpterm},nl}), - - case OptOrMand of - mandatory -> emit([indent(N+3),"end,",nl]); - _ -> - emit([indent(N+3),"end",nl, - indent(3),"end,",nl]) - end, -% emit({indent(3),"end,",nl}), - gen_dec_postponed_decs(DecObj,Rest). - - -emit_opt_or_mand_check(Value,TmpTerm) -> - emit([indent(3),"case ",TmpTerm," of",nl, - indent(6),{asis,Value}," -> {",{asis,Value},",[],[]};",nl, - indent(6),"_ ->",nl]). - -%%============================================================================ -%% Encode/decode SET -%% -%%============================================================================ - -gen_encode_set(Erules,Typename,D) when is_record(D,type) -> - gen_encode_sequence(Erules,Typename,D). - -gen_decode_set(Erules,Typename,D) when is_record(D,type) -> - asn1ct_name:start(), - asn1ct_name:clear(), - asn1ct_name:new(term), - asn1ct_name:new(tag), - #'SET'{components=TCompList0} = D#type.def, - - %% filter away extensionAdditiongroup markers - TCompList = filter_complist(TCompList0), - Ext = extensible(TCompList), - ToOptional = fun(mandatory) -> - 'OPTIONAL'; - (X) -> X - end, - CompList = case TCompList of - {Rl1,El,Rl2} -> - Rl1 ++ [X#'ComponentType'{prop=ToOptional(Y)}||X = #'ComponentType'{prop=Y}<-El] ++ Rl2; - {Rl,El} -> Rl ++ El; - _ -> TCompList - end, - - emit([" %%-------------------------------------------------",nl]), - emit([" %% decode tag and length ",nl]), - emit([" %%-------------------------------------------------",nl]), - - asn1ct_name:new(rb), - MyTag = [X#tag{class=asn1ct_gen_ber:decode_class(X#tag.class)}|| X <- D#type.tag] - ++ - [#tag{class = asn1ct_gen_ber:decode_class('UNIVERSAL'), - number = asn1ct_gen_ber:decode_type('SET'), - form = ?CONSTRUCTED, - type = 'IMPLICIT'}], - emit([" {{_,Len},",{next,bytes},",",{curr,rb}, - "} = ?RT_BER:check_tags(TagIn ++ ",{asis,MyTag},", ", - {curr,bytes},", OptOrMand), ",nl]), - asn1ct_name:new(bytes), - asn1ct_name:new(len), - asn1ct_name:new(rb), - - emit([" {SetTerm, SetBytes, ",{curr,rb},"} = ?RT_BER:decode_set(0, Len, ", - {curr,bytes},", OptOrMand, ", - "fun 'dec_",asn1ct_gen:list2name(Typename),"_fun'/2, []),",nl]), - - asn1ct_name:new(rb), - {ExtFlatten1,ExtFlatten2} = - case Ext of - noext -> {"",""}; - _ -> {"lists:flatten(",")"} - end, - emit([" 'dec_",asn1ct_gen:list2name(Typename), - "__result__'(lists:sort(",ExtFlatten1,"SetTerm",ExtFlatten2,"), SetBytes, "]), - asn1ct_gen_ber:add_removed_bytes(), - emit([").",nl,nl,nl]), - - emit({"%%-------------------------------------------------",nl}), - emit({"%% Set loop fun for ",asn1ct_gen:list2name(Typename),nl}), - emit({"%%-------------------------------------------------",nl}), - - asn1ct_name:clear(), - asn1ct_name:new(term), - emit(["'dec_",asn1ct_gen:list2name(Typename),"_fun'(",{curr,bytes}, - ", OptOrMand) ->",nl]), - - asn1ct_name:new(bytes), - gen_dec_set(Erules,Typename,CompList,1,Ext), - - emit([" %% tag not found, if extensionmark we should skip bytes here",nl]), - emit([indent(6),"_ -> ",nl]), - case Ext of - noext -> - emit([indent(9),"{[], Bytes,0}",nl]); - _ -> - asn1ct_name:new(rbCho), - emit([indent(9),"{RestBytes, ",{curr,rbCho}, - "} = ?RT_BER:skipvalue(Bytes),",nl, - indent(9),"{[], RestBytes, ",{curr,rbCho},"}",nl]) - end, - emit([indent(3),"end.",nl,nl,nl]), - - - emit({"%%-------------------------------------------------",nl}), - emit({"%% Result ",asn1ct_gen:list2name(Typename),nl}), - emit({"%%-------------------------------------------------",nl}), - - asn1ct_name:clear(), - emit({"'dec_",asn1ct_gen:list2name(Typename),"__result__'(", - asn1ct_gen_ber:unused_var("TermList",D#type.def),", Bytes, Rb) ->",nl}), - RecordName = lists:concat([get_record_name_prefix(), - asn1ct_gen:list2rname(Typename)]), - case gen_dec_set_result(Erules,Typename,CompList) of - no_terms -> - %% return value as record - asn1ct_name:new(rb), - emit({" {{'",RecordName,"'}, Bytes, Rb}.",nl}); - _ -> - emit({nl," case ",{curr,termList}," of",nl}), - emit({" [] -> {{'",RecordName,"', "}), - mkvlist(asn1ct_name:all(term)), - emit({"}, Bytes, Rb};",nl}), - emit({" ExtraAtt -> exit({error,{asn1,{too_many_attributes, ExtraAtt}}})",nl}), - emit({" end.",nl}), - emit({nl,nl,nl}) - end. - - -%%=============================================================================== -%%=============================================================================== -%%=============================================================================== -%% Encode/decode SEQUENCE OF and SET OF -%%=============================================================================== -%%=============================================================================== -%%=============================================================================== - -gen_encode_sof(Erules,Typename,_InnerTypename,D) when is_record(D,type) -> - asn1ct_name:start(), - {SeqOrSetOf, Cont} = D#type.def, - - Objfun = case D#type.tablecinf of - [{objfun,_}|_R] -> - ", ObjFun"; - _ -> - "" - end, - - emit({" {EncBytes,EncLen} = 'enc_",asn1ct_gen:list2name(Typename), - "_components'(Val",Objfun,",[],0),",nl}), - - MyTag = [X#tag{class=asn1ct_gen_ber:decode_class(X#tag.class)}|| X <- D#type.tag] - ++ - [#tag{class = asn1ct_gen_ber:decode_class('UNIVERSAL'), - number = asn1ct_gen_ber:decode_type(SeqOrSetOf), - form = ?CONSTRUCTED, - type = 'IMPLICIT'}], -% gen_encode_tags(Erules,MyTag,"EncLen","EncBytes"), - emit([" ?RT_BER:encode_tags(TagIn ++ ", - {asis,MyTag},", EncBytes, EncLen).",nl,nl]), - - gen_encode_sof_components(Erules,Typename,SeqOrSetOf,Cont). -% gen_enc_line(Erules,Typename,TypeNameSuffix,Cont,"H",0, -% mandatory,"{EncBytes,EncLen} = "), - - -gen_decode_sof(Erules,Typename,_InnerTypename,D) when is_record(D,type) -> - asn1ct_name:start(), - asn1ct_name:clear(), - {SeqOrSetOf, TypeTag, Cont} = - case D#type.def of - {'SET OF',_Cont} -> {'SET OF','SET',_Cont}; - {'SEQUENCE OF',_Cont} -> {'SEQUENCE OF','SEQUENCE',_Cont} - end, - TypeNameSuffix = asn1ct_gen:constructed_suffix(SeqOrSetOf,Cont#type.def), - - emit({" %%-------------------------------------------------",nl}), - emit({" %% decode tag and length ",nl}), - emit({" %%-------------------------------------------------",nl}), - - asn1ct_name:new(rb), - MyTag = [X#tag{class=asn1ct_gen_ber:decode_class(X#tag.class)}|| X <- D#type.tag] - ++ - [#tag{class = asn1ct_gen_ber:decode_class('UNIVERSAL'), - number = asn1ct_gen_ber:decode_type(TypeTag), - form = ?CONSTRUCTED, - type = 'IMPLICIT'}], - emit([" {{_,Len},",{next,bytes},",",{curr,rb}, - "} = ?RT_BER:check_tags(TagIn ++ ",{asis,MyTag},", ", - {curr,bytes},", OptOrMand), ",nl]), - - emit([" ?RT_BER:decode_components(",{curr,rb}]), - InnerType = asn1ct_gen:get_inner(Cont#type.def), - ContName = case asn1ct_gen:type(InnerType) of - Atom when is_atom(Atom) -> Atom; - _ -> TypeNameSuffix - end, - emit([", Len, ",{next,bytes},", "]), -% NewCont = -% case Cont#type.def of -% {'ENUMERATED',_,Components}-> -% Cont#type{def={'ENUMERATED',Components}}; -% _ -> Cont -% end, - ObjFun = - case D#type.tablecinf of - [{objfun,_}|_R] -> - ", ObjFun"; - _ -> - [] - end, - gen_dec_line_sof(Erules,Typename,ContName,Cont,ObjFun), - emit([", []).",nl,nl,nl]). - - -gen_encode_sof_components(Erules,Typename,SeqOrSetOf,Cont) - when is_record(Cont,type)-> - - {Objfun,ObjFun_novar,EncObj} = - case Cont#type.tablecinf of - [{objfun,_}|_R] -> - {", ObjFun",", _",{no_attr,"ObjFun"}}; - _ -> - {"","",false} - end, - emit(["'enc_",asn1ct_gen:list2name(Typename), - "_components'([]",ObjFun_novar,", AccBytes, AccLen) -> ",nl]), - - case catch lists:member(der,get(encoding_options)) of - true when SeqOrSetOf=='SET OF' -> - emit([indent(3), - "{asn1rt_check:dynamicsort_SETOF(AccBytes),AccLen};",nl,nl]); - _ -> - emit([indent(3),"{lists:reverse(AccBytes),AccLen};",nl,nl]) - end, - emit(["'enc_",asn1ct_gen:list2name(Typename), - "_components'([H|T]",Objfun,",AccBytes, AccLen) ->",nl]), - TypeNameSuffix = asn1ct_gen:constructed_suffix(SeqOrSetOf,Cont#type.def), - gen_enc_line(Erules,Typename,TypeNameSuffix,Cont,"H",3, -% mandatory,"{EncBytes,EncLen} = ",EncObj), - mandatory,EncObj), - emit([",",nl]), - emit([indent(3),"'enc_",asn1ct_gen:list2name(Typename), - "_components'(T",Objfun,","]), - emit(["[EncBytes|AccBytes], AccLen + EncLen).",nl,nl]). - -%%============================================================================ -%% Encode/decode CHOICE -%% -%%============================================================================ - -gen_encode_choice(Erules,Typename,D) when is_record(D,type) -> - ChoiceTag = D#type.tag, - {'CHOICE',CompList} = D#type.def, - Ext = extensible(CompList), - CompList1 = case CompList of - {Rl1,El,Rl2} -> Rl1 ++ El ++ Rl2; - {Rl,El} -> Rl ++ El; - _ -> CompList - end, - gen_enc_choice(Erules,Typename,ChoiceTag,CompList1,Ext), - emit({nl,nl}). - -gen_decode_choice(Erules,Typename,D) when is_record(D,type) -> - asn1ct_name:start(), - asn1ct_name:new(bytes), - ChoiceTag = D#type.tag, - {'CHOICE',CompList} = D#type.def, - Ext = extensible(CompList), - CompList1 = case CompList of - {Rl1,El,Rl2} -> Rl1 ++ El ++Rl2; - {Rl,El} -> Rl ++ El; - _ -> CompList - end, - gen_dec_choice(Erules,Typename,ChoiceTag,CompList1,Ext), - emit({".",nl}). - - -%%============================================================================ -%% Encode SEQUENCE -%% -%%============================================================================ - -gen_enc_sequence_call(Erules,TopType,[#'ComponentType'{name=Cname,typespec=Type,prop=Prop,textual_order=Order}|Rest],Pos,Ext,EncObj) -> - asn1ct_name:new(encBytes), - asn1ct_name:new(encLen), - CindexPos = - case Order of - undefined -> - Pos; - _ -> Order % der - end, - Element = - case TopType of - ['EXTERNAL'] -> - io_lib:format("?RT_BER:cindex(~w,NewVal,~w)",[CindexPos+1,Cname]); - _ -> - io_lib:format("?RT_BER:cindex(~w,Val,~w)",[CindexPos+1,Cname]) - end, - InnerType = asn1ct_gen:get_inner(Type#type.def), - print_attribute_comment(InnerType,Pos,Prop), - gen_enc_line(Erules,TopType,Cname,Type,Element,3,Prop,EncObj), - case Rest of - [] -> - emit({com,nl}); - _ -> - emit({com,nl}), - gen_enc_sequence_call(Erules,TopType,Rest,Pos+1,Ext,EncObj) - end; - -gen_enc_sequence_call(_Erules,_TopType,[],_Num,_,_) -> - true. - -%%============================================================================ -%% Decode SEQUENCE -%% -%%============================================================================ - -gen_dec_sequence_call(Erules,TopType,CompList,Ext,DecObjInf) - when is_list(CompList) -> - gen_dec_sequence_call1(Erules,TopType, CompList, 1, Ext,DecObjInf,[],[]); -gen_dec_sequence_call(Erules,TopType,CList,Ext,DecObjInf) -> - gen_dec_sequence_call2(Erules,TopType,CList,Ext,DecObjInf). - -gen_dec_sequence_call1(Erules,TopType,[#'ComponentType'{name=Cname,typespec=Type,prop=Prop,tags=Tags}|Rest],Num,Ext,DecObjInf,LeadingAttrAcc,ArgsAcc) -> - {LA,PostponedDec} = - gen_dec_component(Erules,TopType,Cname,Tags,Type,Num,Prop, - Ext,DecObjInf), - case Rest of - [] -> - {LA ++ LeadingAttrAcc,PostponedDec ++ ArgsAcc}; - _ -> - emit({com,nl}), -% asn1ct_name:new(term), - asn1ct_name:new(bytes), - gen_dec_sequence_call1(Erules,TopType,Rest,Num+1,Ext,DecObjInf, - LA++LeadingAttrAcc,PostponedDec++ArgsAcc) - end; - -gen_dec_sequence_call1(_Erules,_TopType,[],1,_,_,_,_) -> - no_terms. - -gen_dec_sequence_call2(_Erules,_TopType,{[],[],[]},_Ext,_DecObjInf) -> - no_terms; -gen_dec_sequence_call2(Erules,TopType,{Root1,EList,Root2},_Ext,DecObjInf) -> - {LA,ArgsAcc} = - case gen_dec_sequence_call1(Erules,TopType,Root1++EList,1, - extensible({Root1,EList}),DecObjInf,[],[]) of - no_terms -> - {[],[]}; - Res -> Res - end, - %% TagList is the tags of Root2 elements from the first up to and - %% including the first mandatory element. - TagList = get_root2_taglist(Root2,[]), - emit({com,nl}), - asn1ct_name:new(bytes), - emit([" {",{next,bytes},", ",{next,rb}, - "} = ?RT_BER:skip_ExtensionAdditions(", - {curr,bytes},", ",{asis,TagList},"),",nl]), - asn1ct_name:new(rb), - asn1ct_name:new(bytes), - gen_dec_sequence_call1(Erules,TopType,Root2, - length(Root1)+length(EList),noext, - DecObjInf,LA,ArgsAcc). - -%% returns a list of tags of the elements in the component (second -%% root) list up to and including the first mandatory tag. See 24.6 in -%% X.680 (7/2002) -get_root2_taglist([],Acc) -> - lists:reverse(Acc); -get_root2_taglist([#'ComponentType'{prop=Prop,typespec=Type}|Rest],Acc) -> - FirstTag = fun([])->[]; - ([H|_T])->H#tag{class=asn1ct_gen_ber:decode_class(H#tag.class)} - end(Type#type.tag), - case Prop of - mandatory -> - %% match_tags/ may be used - %% this is the last tag of interest -> return - lists:reverse([FirstTag|Acc]); - _ -> - get_root2_taglist(Rest,[FirstTag|Acc]) - end. - - -%%---------------------------- -%%SEQUENCE mandatory -%%---------------------------- - -gen_dec_component(Erules,TopType,Cname,CTags,Type,Pos,Prop,Ext,DecObjInf) -> - InnerType = - case Type#type.def of - #'ObjectClassFieldType'{type=OCFTType} -> OCFTType; - _ -> asn1ct_gen:get_inner(Type#type.def) - end, - - Prop1 = case {Prop,Ext} of - {_,{ext,Epos,_Root2pos}} when Pos < Epos -> - Prop; - {mandatory,{ext,Epos,_}} when Pos >= Epos -> - 'OPTIONAL'; - _ -> - Prop - end, - print_attribute_comment(InnerType,Pos,Prop1), - emit(" "), - - case {InnerType,DecObjInf} of - {{typefield,_},NotFalse} when NotFalse /= false -> - asn1ct_name:new(term), - asn1ct_name:new(tmpterm), - emit({"{",{curr,tmpterm},", ",{next,bytes},",",{next,rb},"} = "}); - {{objectfield,_,_},_} -> - asn1ct_name:new(term), - asn1ct_name:new(tmpterm), - emit({"{",{curr,tmpterm},", ",{next,bytes},",",{next,rb},"} = "}); - _ -> - asn1ct_name:new(term), - emit({"{",{curr,term},",",{next,bytes},",",{next,rb},"} = "}) - end, - asn1ct_name:new(rb), - PostponedDec = - gen_dec_line(Erules,TopType,Cname,CTags,Type,Prop1,DecObjInf), - asn1ct_name:new(form), - PostponedDec. - - -%%------------------------------------- -%% Decode SET -%%------------------------------------- - -gen_dec_set(Erules,TopType,CompList,Pos,Ext) -> - ExtCatch = case Ext of - noext ->""; - _ -> " catch" - end, - TagList = get_all_choice_tags(CompList), - emit({indent(3), - {curr,tagList}," = ",{asis,TagList},",",nl}), - emit({indent(3), - "case",ExtCatch," ?RT_BER:check_if_valid_tag(Bytes, ", - {curr,tagList},", OptOrMand) of",nl}), - asn1ct_name:new(tagList), - asn1ct_name:new(rbCho), - asn1ct_name:new(choTags), - gen_dec_set_cases(Erules,TopType,CompList,TagList,Pos), - asn1ct_name:new(tag), - asn1ct_name:new(bytes). - - - -gen_dec_set_cases(_,_,[],_,_) -> - ok; -gen_dec_set_cases(Erules,TopType,[H|T],List,Pos) -> - Name = H#'ComponentType'.name, - Type = H#'ComponentType'.typespec, - - emit({indent(6),"'",Name,"' ->",nl}), - case Type#type.def of - {'CHOICE',_NewCompList} -> - gen_dec_set_cases_choice(Erules,TopType,H,Pos); - _ -> - gen_dec_set_cases_type(Erules,TopType,H,Pos) - end, - gen_dec_set_cases(Erules,TopType,T,List,Pos+1). - - - -gen_dec_set_cases_choice(_Erules,TopType,H,Pos) -> - Cname = H#'ComponentType'.name, - Tag = [X#tag{class=asn1ct_gen_ber:decode_class(X#tag.class)} - || X <- (H#'ComponentType'.typespec)#type.tag], - asn1ct_name:new(rbCho), - emit({indent(9),"{Dec, Rest, ",{curr,rbCho},"} = "}), - emit({"'dec_",asn1ct_gen:list2name([Cname|TopType]), - "'(Bytes,OptOrMand,",{asis,Tag},"),",nl}), - emit([" {{",Pos,",Dec}, Rest, ",{curr,rbCho},"}"]), - emit([";",nl,nl]). - - -gen_dec_set_cases_type(Erules,TopType,H,Pos) -> - Cname = H#'ComponentType'.name, - Type = H#'ComponentType'.typespec, - %% always use Prop = mandatory here Prop = H#'ComponentType'.prop, - - asn1ct_name:new(rbCho), - emit({indent(9),"{Dec, Rest, ",{curr,rbCho},"} = "}), - asn1ct_name:delete(bytes), - %% we have already seen the tag so now we must find the value - %% that why we always use 'mandatory' here - gen_dec_line(Erules,TopType,Cname,[],Type,mandatory,decObjInf), - asn1ct_name:new(bytes), - - emit([",",nl]), - emit(["{{",Pos,",Dec}, Rest, ",{curr,rbCho},"}"]), - emit([";",nl,nl]). - - -%%--------------------------------- -%% Decode SET result -%%--------------------------------- - -gen_dec_set_result(Erules,TopType,CompList) -> - gen_dec_set_result1(Erules,TopType, CompList, 1). - -gen_dec_set_result1(Erules,TopType, - [#'ComponentType'{name=Cname, - typespec=Type, - prop=Prop}|Rest],Num) -> - gen_dec_set_component(Erules,TopType,Cname,Type,Num,Prop), - case Rest of - [] -> - true; - _ -> - gen_dec_set_result1(Erules,TopType,Rest,Num+1) - end; - -gen_dec_set_result1(_Erules,_TopType,[],1) -> - no_terms; -gen_dec_set_result1(_Erules,_TopType,[],_Num) -> - true. - - -gen_dec_set_component(_Erules,_TopType,_Cname,Type,Pos,Prop) -> - InnerType = asn1ct_gen:get_inner(Type#type.def), - print_attribute_comment(InnerType,Pos,Prop), - emit({" {",{next,term},com,{next,termList},"} =",nl}), - emit({" case ",{curr,termList}," of",nl}), - emit({" [{",Pos,com,{curr,termTmp},"}|", - {curr,rest},"] -> "}), - emit({"{",{curr,termTmp},com, - {curr,rest},"};",nl}), - case Prop of - 'OPTIONAL' -> - emit([indent(10),"_ -> {asn1_NOVALUE, ",{curr,termList},"}",nl]); - {'DEFAULT', DefVal} -> - emit([indent(10), - "_ -> {",{asis,DefVal},", ",{curr,termList},"}",nl]); - mandatory -> - emit([indent(10), - "_ -> exit({error,{asn1,{mandatory_attribute_no, ", - Pos,", missing}}})",nl]) - end, - emit([indent(6),"end,",nl]), - asn1ct_name:new(rest), - asn1ct_name:new(term), - asn1ct_name:new(termList), - asn1ct_name:new(termTmp). - - -%%--------------------------------------------- -%% Encode CHOICE -%%--------------------------------------------- -%% for BER we currently do care (a little) if the choice has an EXTENSIONMARKER - - -gen_enc_choice(Erules,TopType,Tag,CompList,_Ext) -> - gen_enc_choice1(Erules,TopType,Tag,CompList,_Ext). - -gen_enc_choice1(Erules,TopType,Tag,CompList,_Ext) -> - asn1ct_name:clear(), - emit({" {EncBytes,EncLen} = case element(1,Val) of",nl}), - gen_enc_choice2(Erules,TopType,CompList), - emit([nl," end,",nl,nl]), - NewTag = [X#tag{class=asn1ct_gen_ber:decode_class(X#tag.class)}|| X <- Tag], -% gen_encode_tags(Erules,NewTag,"EncLen","EncBytes"). - emit(["?RT_BER:encode_tags(TagIn ++",{asis,NewTag},", EncBytes, EncLen).",nl]). - - - -gen_enc_choice2(Erules,TopType,[H1|T]) when is_record(H1,'ComponentType') -> - Cname = H1#'ComponentType'.name, - Type = H1#'ComponentType'.typespec, - emit({" ",{asis,Cname}," ->",nl}), - {Encobj,Assign} = -% case asn1ct_gen:get_constraint(Type#type.constraint, -% tableconstraint_info) of - case {Type#type.def,asn1ct_gen:get_constraint(Type#type.constraint, - componentrelation)} of - {#'ObjectClassFieldType'{},{componentrelation,_,_}} -> - asn1ct_name:new(tmpBytes), - asn1ct_name:new(encBytes), - asn1ct_name:new(encLen), - Emit = ["{",{curr,tmpBytes},", _} = "], - {{no_attr,"ObjFun"},Emit}; - _ -> - case Type#type.tablecinf of - [{objfun,_}] -> {{no_attr,"ObjFun"},[]}; - _-> {false,[]} - end - end, - gen_enc_line(Erules,TopType,Cname,Type,"element(2,Val)",9, - mandatory,Assign,Encobj), - case {Type#type.def,Encobj} of - {#'ObjectClassFieldType'{},{no_attr,"ObjFun"}} -> - emit({",",nl,indent(9),"{",{curr,encBytes},", ", - {curr,encLen},"}"}); - _ -> ok - end, - emit({";",nl}), - case T of - [] -> - emit([indent(6), "Else -> ",nl, - indent(9),"exit({error,{asn1,{invalid_choice_type,Else}}})"]); - _ -> - true - end, - gen_enc_choice2(Erules,TopType,T); - -gen_enc_choice2(_,_,[]) -> - true. - - - - -%%-------------------------------------------- -%% Decode CHOICE -%%-------------------------------------------- - -gen_dec_choice(Erules,TopType, ChTag, CompList, Ext) -> - asn1ct_name:delete(bytes), - Tags = [X#tag{class=asn1ct_gen_ber:decode_class(X#tag.class)}|| X <- ChTag], - - emit([" {{_,Len},",{next,bytes}, - ", RbExp} = ?RT_BER:check_tags(TagIn++", - {asis,Tags},", ", - {curr,bytes},", OptOrMand),",nl]), - asn1ct_name:new(bytes), - asn1ct_name:new(len), - gen_dec_choice_indef_funs(Erules), - case Erules of - ber_bin -> - emit([indent(3),"case ",{curr,bytes}," of",nl]); - ber -> - emit([indent(3), - "case (catch ?RT_BER:peek_tag(",{curr,bytes},")) of",nl]) - end, - asn1ct_name:new(tagList), - asn1ct_name:new(choTags), - gen_dec_choice_cases(Erules,TopType,CompList), - case Ext of - noext -> - emit([indent(6), {curr,else}," -> ",nl]), - emit([indent(9),"case OptOrMand of",nl, - indent(12),"mandatory ->","exit({error,{asn1,", - "{invalid_choice_tag,",{curr,else},"}}});",nl, - indent(12),"_ ->","exit({error,{asn1,{no_optional_tag,", - {curr,else},"}}})",nl, - indent(9),"end",nl]); - _ -> - emit([indent(6),"_ -> ",nl]), - emit([indent(9),"{{asn1_ExtAlt,",{curr,bytes},"},", - empty_lb(Erules),", RbExp}",nl]) - end, - emit([indent(3),"end"]), - asn1ct_name:new(tag), - asn1ct_name:new(else). - -gen_dec_choice_indef_funs(Erules) -> - emit({indent(3),"IndefEndBytes = fun(indefinite,",indefend_match(Erules,used_var), - ")-> R; (_,B)-> B end,",nl}), - emit({indent(3),"IndefEndRb = fun(indefinite,",indefend_match(Erules,unused_var), - ")-> 2; (_,_)-> 0 end,",nl}). - - -gen_dec_choice_cases(_,_, []) -> - ok; -gen_dec_choice_cases(Erules,TopType, [H|T]) -> - asn1ct_name:push(rbCho), - Name = H#'ComponentType'.name, - emit([nl,"%% '",Name,"'",nl]), - Fcases = fun([T1,T2|Tail],Fun) -> - emit([indent(6),match_tag(Erules,T1)," ->",nl]), - gen_dec_choice_cases_type(Erules,TopType, H), - Fun([T2|Tail],Fun); - ([T1],_) -> - emit([indent(6),match_tag(Erules,T1)," ->",nl]), - gen_dec_choice_cases_type(Erules,TopType, H) - end, - Fcases(H#'ComponentType'.tags,Fcases), - asn1ct_name:pop(rbCho), - gen_dec_choice_cases(Erules,TopType, T). - - - -gen_dec_choice_cases_type(Erules,TopType,H) -> - Cname = H#'ComponentType'.name, - Type = H#'ComponentType'.typespec, - Prop = H#'ComponentType'.prop, - emit({indent(9),"{Dec, Rest, ",{curr,rbCho},"} = "}), - gen_dec_line(Erules,TopType,Cname,[],Type,Prop,false), - emit([",",nl,indent(9),"{{",{asis,Cname}, - ", Dec}, IndefEndBytes(Len,Rest), RbExp + ", - {curr,rbCho}," + IndefEndRb(Len,Rest)};",nl,nl]). - -encode_tag_val(Erules,{Class,TagNo}) when is_integer(TagNo) -> - Rtmod = rtmod(Erules), - Rtmod:encode_tag_val({asn1ct_gen_ber:decode_class(Class), - 0,TagNo}); -encode_tag_val(Erules,{Class,TypeName}) -> - Rtmod = rtmod(Erules), - Rtmod:encode_tag_val({asn1ct_gen_ber:decode_class(Class), - 0,asn1ct_gen_ber:decode_type(TypeName)}). - - -match_tag(ber_bin,Arg) -> - match_tag_with_bitsyntax(Arg); -match_tag(Erules,Arg) -> - io_lib:format("~p",[encode_tag_val(Erules,Arg)]). - -match_tag_with_bitsyntax({Class,TagNo}) when is_integer(TagNo) -> - match_tag_with_bitsyntax1({asn1ct_gen_ber:decode_class(Class), - 0,TagNo}); -match_tag_with_bitsyntax({Class,TypeName}) -> - match_tag_with_bitsyntax1({asn1ct_gen_ber:decode_class(Class), - 0,asn1ct_gen_ber:decode_type(TypeName)}). - -match_tag_with_bitsyntax1({Class, _Form, TagNo}) when (TagNo =< 30) -> - io_lib:format("<<~p:2,_:1,~p:5,_/binary>>",[Class bsr 6,TagNo]); - -match_tag_with_bitsyntax1({Class, _Form, TagNo}) -> - {Octets,Len} = mk_object_val(TagNo), - OctForm = case Len of - 1 -> "~p"; - 2 -> "~p,~p"; - 3 -> "~p,~p,~p"; - 4 -> "~p,~p,~p,~p" - end, - io_lib:format("<<~p:2,_:1,31:5," ++ OctForm ++ ",_/binary>>", - [Class bsr 6] ++ Octets). - -%%%%%%%%%%% -%% mk_object_val(Value) -> {OctetList, Len} -%% returns a Val as a list of octets, the 8 bit is allways set to one except -%% for the last octet, where its 0 -%% - - -mk_object_val(Val) when Val =< 127 -> - {[255 band Val], 1}; -mk_object_val(Val) -> - mk_object_val(Val bsr 7, [Val band 127], 1). -mk_object_val(0, Ack, Len) -> - {Ack, Len}; -mk_object_val(Val, Ack, Len) -> - mk_object_val(Val bsr 7, [((Val band 127) bor 128) | Ack], Len + 1). - - -get_all_choice_tags(ComponentTypeList) -> - get_all_choice_tags(ComponentTypeList,[]). - -get_all_choice_tags([],TagList) -> - TagList; -get_all_choice_tags([H|T],TagList) -> - Tags = H#'ComponentType'.tags, - get_all_choice_tags(T, TagList ++ [{H#'ComponentType'.name, Tags}]). - - - -%%--------------------------------------- -%% Generate the encode/decode code -%%--------------------------------------- - -gen_enc_line(Erules,TopType,Cname, - Type=#type{constraint=C, - def=#'ObjectClassFieldType'{type={typefield,_}}}, - Element,Indent,OptOrMand=mandatory,EncObj) - when is_list(Element) -> - case asn1ct_gen:get_constraint(C,componentrelation) of - {componentrelation,_,_} -> - asn1ct_name:new(tmpBytes), - gen_enc_line(Erules,TopType,Cname,Type,Element,Indent,OptOrMand, - ["{",{curr,tmpBytes},",_} = "],EncObj); - _ -> - gen_enc_line(Erules,TopType,Cname,Type,Element,Indent,OptOrMand, - ["{",{curr,encBytes},",",{curr,encLen},"} = "], - EncObj) - end; - gen_enc_line(Erules,TopType,Cname,Type,Element,Indent,OptOrMand,EncObj) - when is_list(Element) -> - gen_enc_line(Erules,TopType,Cname,Type,Element,Indent,OptOrMand, - ["{",{curr,encBytes},",",{curr,encLen},"} = "],EncObj). - -gen_enc_line(Erules,TopType,Cname,Type,Element,Indent,OptOrMand,Assign,EncObj) - when is_list(Element) -> - IndDeep = indent(Indent), - - Tag = [X#tag{class=asn1ct_gen_ber:decode_class(X#tag.class)} - || X <- Type#type.tag], - InnerType = asn1ct_gen:get_inner(Type#type.def), - WhatKind = asn1ct_gen:type(InnerType), - emit(IndDeep), - emit(Assign), - gen_optormand_case(OptOrMand,Erules,TopType,Cname,Type,InnerType,WhatKind, - Element), - case {Type,asn1ct_gen:get_constraint(Type#type.constraint, - componentrelation)} of - {#type{def=#'ObjectClassFieldType'{type={typefield,_}, - fieldname=RefedFieldName}}, - {componentrelation,_,_}} -> - {_LeadingAttrName,Fun} = EncObj, - case RefedFieldName of - {Name,RestFieldNames} when is_atom(Name),Name =/= notype -> - case OptOrMand of - mandatory -> ok; - _ -> - emit(["{",{curr,tmpBytes},", _} = "]) - end, - emit({Fun,"(",{asis,Name},", ",Element,", [], ", - {asis,RestFieldNames},"),",nl}), - emit(IndDeep), - case OptOrMand of - mandatory -> - emit({"{",{curr,encBytes},", ",{curr,encLen},"} = "}), - emit({"?RT_BER:encode_open_type(",{curr,tmpBytes}, - ",",{asis,Tag},")"}); - _ -> - emit({"{",{next,tmpBytes},", ",{curr,tmpLen}, - "} = "}), - emit({"?RT_BER:encode_open_type(",{curr,tmpBytes}, - ",",{asis,Tag},"),",nl}), - emit(IndDeep), - emit({"{",{next,tmpBytes},", ",{curr,tmpLen},"}"}) - end; - Err -> - throw({asn1,{'internal error',Err}}) - end; - _ -> - case WhatKind of - {primitive,bif} -> - EncType = - case Type#type.def of - #'ObjectClassFieldType'{ - type={fixedtypevaluefield, - _,Btype}} -> - Btype; - _ -> - Type - end, - asn1ct_gen_ber:gen_encode_prim(ber,EncType,{asis,Tag}, - Element); - 'ASN1_OPEN_TYPE' -> - asn1ct_gen_ber:gen_encode_prim(ber,Type#type{def='ASN1_OPEN_TYPE'},{asis,Tag},Element); - _ -> - {EncFunName, _, _} = - mkfuncname(TopType,Cname,WhatKind,enc), - case {WhatKind,Type#type.tablecinf,EncObj} of - {{constructed,bif},[{objfun,_}|_R],{_,Fun}} -> - emit([EncFunName,"(",Element,", ",{asis,Tag}, - ", ",Fun,")"]); - _ -> - emit([EncFunName,"(",Element,", ",{asis,Tag},")"]) - end - end - end, - case OptOrMand of - mandatory -> true; - _ -> - emit({nl,indent(7),"end"}) - end. - - - -gen_optormand_case(mandatory,_,_,_,_,_,_, _) -> - ok; -gen_optormand_case('OPTIONAL',Erules,_,_,_,_,_,Element) -> - emit({" case ",Element," of",nl}), - emit({indent(9),"asn1_NOVALUE -> {", - empty_lb(Erules),",0};",nl}), - emit({indent(9),"_ ->",nl,indent(12)}); -gen_optormand_case({'DEFAULT',DefaultValue},Erules,TopType,Cname,Type, - InnerType,WhatKind,Element) -> - CurrMod = get(currmod), - case catch lists:member(der,get(encoding_options)) of - true -> - emit(" case catch "), - asn1ct_gen:gen_check_call(TopType,Cname,Type,InnerType, - WhatKind,{asis,DefaultValue}, - Element), - emit({" of",nl}), - emit({indent(12),"true -> {[],0};",nl}); - _ -> - emit({" case ",Element," of",nl}), - emit({indent(9),"asn1_DEFAULT -> {", - empty_lb(Erules), - ",0};",nl}), - case DefaultValue of - #'Externalvaluereference'{module=CurrMod, - value=V} -> - emit({indent(9),"?",{asis,V}," -> {", - empty_lb(Erules),",0};",nl}); - _ -> - emit({indent(9),{asis, - DefaultValue}," -> {", - empty_lb(Erules),",0};",nl}) - end - end, - emit({indent(9),"_ ->",nl,indent(12)}). - - - - -gen_dec_line_sof(Erules,TopType,Cname,Type,ObjFun) -> - - Tag = [X#tag{class=asn1ct_gen_ber:decode_class(X#tag.class)} - || X <- Type#type.tag], - InnerType = asn1ct_gen:get_inner(Type#type.def), - WhatKind = asn1ct_gen:type(InnerType), - case WhatKind of - {primitive,bif} -> - asn1ct_name:delete(len), - - asn1ct_name:new(len), - emit(["fun(FBytes,_,_)->",nl]), - EncType = case Type#type.def of - #'ObjectClassFieldType'{ - type={fixedtypevaluefield, - _,Btype}} -> - Btype; - _ -> - Type - end, - asn1ct_gen_ber:gen_dec_prim(ber,EncType,"FBytes",Tag, - [],no_length,?PRIMITIVE, - mandatory), - emit([nl,"end, []"]); - _ -> - case ObjFun of - [] -> - {DecFunName, _, _} = - mkfunname(Erules,TopType,Cname,WhatKind,dec,3), - emit([DecFunName,", ",{asis,Tag}]); - _ -> - {DecFunName, _, _} = - mkfunname(Erules,TopType,Cname,WhatKind,dec,4), - emit([DecFunName,", ",{asis,Tag},", ObjFun"]) - end - end. - - -gen_dec_line(Erules,TopType,Cname,CTags,Type,OptOrMand,DecObjInf) -> - BytesVar = asn1ct_gen:mk_var(asn1ct_name:curr(bytes)), - Tag = [X#tag{class=asn1ct_gen_ber:decode_class(X#tag.class)} - || X <- Type#type.tag], - InnerType = - case Type#type.def of - #'ObjectClassFieldType'{type=OCFTType} -> - OCFTType; - _ -> - asn1ct_gen:get_inner(Type#type.def) - end, - PostpDec = - case OptOrMand of - mandatory -> - gen_dec_call(InnerType,Erules,TopType,Cname,Type, - BytesVar,Tag,mandatory,", mandatory, ", - DecObjInf,OptOrMand); - _ -> %optional or default - case {CTags,Erules} of - {[CTag],ber_bin} when CTag =/= [] -> % R9C-0.patch-34 - emit(["case ",{curr,bytes}," of",nl]), - emit([match_tag(Erules,CTag)," ->",nl]), - PostponedDec = - gen_dec_call(InnerType,Erules,TopType,Cname,Type, - BytesVar,Tag,mandatory, - ", opt_or_default, ",DecObjInf, - OptOrMand), - emit([";",nl]), - emit(["_ ->",nl]), - case OptOrMand of - {'DEFAULT', Def} -> - emit(["{",{asis,Def},",", - BytesVar,", 0 }",nl]); - 'OPTIONAL' -> - emit(["{ asn1_NOVALUE, ", - BytesVar,", 0 }",nl]) - end, - emit("end"), - PostponedDec; - _ -> - emit("case (catch "), - PostponedDec = - gen_dec_call(InnerType,Erules,TopType,Cname,Type, - BytesVar,Tag,OptOrMand, - ", opt_or_default, ",DecObjInf, - OptOrMand), - emit([") of",nl]), - case OptOrMand of - {'DEFAULT', Def} -> - emit(["{'EXIT',{error,{asn1,{no_optional_tag,_}}}}", - " -> {",{asis,Def},",", - BytesVar,", 0 };",nl]); - 'OPTIONAL' -> - emit(["{'EXIT',{error,{asn1,{no_optional_tag,_}}}}", - " -> { asn1_NOVALUE, ", - BytesVar,", 0 };",nl]) - end, - asn1ct_name:new(casetmp), - emit([{curr,casetmp},"-> ",{curr,casetmp},nl,"end"]), - PostponedDec - end - end, - case DecObjInf of - {Cname,ObjSet} -> % this must be the component were an object is - %% choosen from the object set according to the table - %% constraint. - ObjSetName = case ObjSet of - {deep,OSName,_,_} -> - OSName; - _ -> ObjSet - end, - {[{ObjSetName,Cname,asn1ct_gen:mk_var(asn1ct_name:curr(term))}], - PostpDec}; - _ -> {[],PostpDec} - end. - - -gen_dec_call({typefield,_},Erules,_,_,Type,_,Tag,_,_,false,_) -> - %% this in case of a choice with typefield components - asn1ct_name:new(reason), - {FirstPFName,RestPFName} = -% asn1ct_gen:get_constraint(Type#type.constraint, -% tableconstraint_info), - (Type#type.def)#'ObjectClassFieldType'.fieldname, - emit([nl,indent(6),"begin",nl]), - emit([indent(9),"{OpenDec,TmpRest,TmpRbCho} =",nl,indent(12), - "?RT_BER:decode_open_type(",Erules,",",{curr,bytes},",", - {asis,Tag},"),",nl]), - emit([indent(9),"case (catch ObjFun(",{asis,FirstPFName}, - ", OpenDec, [], ",{asis,RestPFName}, - ")) of", nl]),%% ??? What about Tag - emit([indent(12),"{'EXIT',",{curr,reason},"} ->",nl]), -%% emit({indent(15),"throw({runtime_error,{'Type not ", -%% "compatible with tableconstraint', OpenDec}});",nl}), - emit([indent(15),"exit({'Type not ", - "compatible with table constraint', ",{curr,reason},"});",nl]), - emit([indent(12),"{TmpDec,_ ,_} ->",nl]), - emit([indent(15),"{TmpDec, TmpRest, TmpRbCho}",nl]), - emit([indent(9),"end",nl,indent(6),"end",nl]), - []; -gen_dec_call({typefield,_},_Erules,_,Cname,Type,_BytesVar,Tag,_,_, - _DecObjInf,OptOrMandComp) -> - emit(["?RT_BER:decode_open_type(",{curr,bytes},",",{asis,Tag},")"]), - RefedFieldName = - (Type#type.def)#'ObjectClassFieldType'.fieldname, -% asn1ct_gen:get_constraint(Type#type.constraint, -% tableconstraint_info), - [{Cname,RefedFieldName, - asn1ct_gen:mk_var(asn1ct_name:curr(term)), -% asn1ct_gen:mk_var(asn1ct_name:curr(tmpterm)),[],OptOrMandComp}]; - asn1ct_gen:mk_var(asn1ct_name:curr(tmpterm)),Tag,OptOrMandComp}]; -gen_dec_call({objectfield,PrimFieldName,PFNList},_Erules,_,Cname,_,_,Tag,_,_,_, - OptOrMandComp) -> - emit(["?RT_BER:decode_open_type(",{curr,bytes},",",{asis,Tag},")"]), - [{Cname,{PrimFieldName,PFNList}, - asn1ct_gen:mk_var(asn1ct_name:curr(term)), -% asn1ct_gen:mk_var(asn1ct_name:curr(tmpterm)),[],OptOrMandComp}]; - asn1ct_gen:mk_var(asn1ct_name:curr(tmpterm)),Tag,OptOrMandComp}]; -gen_dec_call(InnerType,Erules,TopType,Cname,Type,BytesVar,Tag,PrimOptOrMand, - OptOrMand,DecObjInf,_) -> - WhatKind = asn1ct_gen:type(InnerType), - gen_dec_call1(WhatKind,InnerType,Erules,TopType,Cname,Type,BytesVar,Tag, - PrimOptOrMand,OptOrMand), - case DecObjInf of - {Cname,{_,OSet,UniqueFName,ValIndex}} -> - Term = asn1ct_gen:mk_var(asn1ct_name:curr(term)), - ValueMatch = value_match(ValIndex,Term), - {ObjSetMod,ObjSetName} = - case OSet of - {M,O} -> - {{asis,M},O}; - _ -> - {"?MODULE",OSet} - end, - emit({",",nl,"ObjFun = ",ObjSetMod,":'getdec_",ObjSetName,"'(", - {asis,UniqueFName},", ",ValueMatch,")"}); - _ -> - ok - end, - []. -gen_dec_call1({primitive,bif},InnerType,Erules,_,_,Type,BytesVar, - Tag,OptOrMand,_) -> - case InnerType of - {fixedtypevaluefield,_,Btype} -> - asn1ct_gen_ber:gen_dec_prim(Erules,Btype,BytesVar,Tag,[],no_length, - ?PRIMITIVE,OptOrMand); - _ -> - asn1ct_gen_ber:gen_dec_prim(Erules,Type,BytesVar,Tag,[],no_length, - ?PRIMITIVE,OptOrMand) - end; -gen_dec_call1('ASN1_OPEN_TYPE',_InnerType,Erules,_,_,Type,BytesVar, - Tag,OptOrMand,_) -> - asn1ct_gen_ber:gen_dec_prim(Erules,Type#type{def='ASN1_OPEN_TYPE'}, - BytesVar,Tag,[],no_length, - ?PRIMITIVE,OptOrMand); -gen_dec_call1(WhatKind,_,_Erules,TopType,Cname,Type,_,Tag,_,OptOrMand) -> - {DecFunName,_,_} = - mkfuncname(TopType,Cname,WhatKind,dec), - case {WhatKind,Type#type.tablecinf} of - {{constructed,bif},[{objfun,_}|_R]} -> - emit({DecFunName,"(",{curr,bytes},OptOrMand,{asis,Tag},", ObjFun)"}); - _ -> - emit({DecFunName,"(",{curr,bytes},OptOrMand,{asis,Tag},")"}) - end. - - -%%------------------------------------------------------ -%% General and special help functions (not exported) -%%------------------------------------------------------ - - -indent(N) -> - lists:duplicate(N,32). % 32 = space - - -mkvlist([H,T1|T], Sep) -> % Sep is a string e.g ", " or "+ " - emit([{var,H},Sep]), - mkvlist([T1|T], Sep); -mkvlist([H|T], Sep) -> - emit([{var,H}]), - mkvlist(T, Sep); -mkvlist([], _) -> - true. - -mkvlist(L) -> - mkvlist(L,", "). - -mkvplus(L) -> - mkvlist(L," + "). - -extensible(CompList) when is_list(CompList) -> - noext; -extensible({RootList,ExtList}) -> - {ext,length(RootList)+1,length(ExtList)}; -extensible({_Rl1,_ExtL,_Rl2}) -> - extensible. -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% filter away ExtensionAdditionGroup start and end marks since these -%% have no significance for the BER encoding -%% -filter_complist(CompList) when is_list(CompList) -> - lists:filter(fun(#'ExtensionAdditionGroup'{}) -> - false; - ('ExtensionAdditionGroupEnd') -> - false; - (_) -> - true - end, CompList); -filter_complist({Root,Ext}) -> - {Root,filter_complist(Ext)}; -filter_complist({Root1,Ext,Root2}) -> - {Root1,filter_complist(Ext),Root2}. - -print_attribute_comment(InnerType,Pos,Prop) -> - CommentLine = "%%-------------------------------------------------", - emit([nl,CommentLine]), - case InnerType of - {typereference,_,Name} -> - emit([nl,"%% attribute number ",Pos," with type ",Name]); - {'Externaltypereference',_,XModule,Name} -> - emit([nl,"%% attribute number ",Pos," External ",XModule,":",Name]); - _ -> - emit([nl,"%% attribute number ",Pos," with type ",InnerType]) - end, - case Prop of - mandatory -> - continue; - {'DEFAULT', Def} -> - emit([" DEFAULT = ",{asis,Def}]); - 'OPTIONAL' -> - emit([" OPTIONAL"]) - end, - emit([nl,CommentLine,nl]). - - -mkfuncname(TopType,Cname,WhatKind,DecOrEnc) -> - CurrMod = get(currmod), - case WhatKind of - #'Externaltypereference'{module=CurrMod,type=EType} -> - F = lists:concat(["'",DecOrEnc,"_",EType,"'"]), - {F, "?MODULE", F}; - #'Externaltypereference'{module=Mod,type=EType} -> - {lists:concat(["'",Mod,"':'",DecOrEnc,"_",EType,"'"]),Mod, - lists:concat(["'",DecOrEnc,"_",EType,"'"])}; - {constructed,bif} -> - F = lists:concat(["'",DecOrEnc,"_",asn1ct_gen:list2name([Cname|TopType]),"'"]), - {F, "?MODULE", F} - end. - -mkfunname(Erule,TopType,Cname,WhatKind,DecOrEnc,Arity) -> - CurrMod = get(currmod), - case WhatKind of - #'Externaltypereference'{module=CurrMod,type=EType} -> - F = lists:concat(["fun '",DecOrEnc,"_",EType,"'/",Arity]), - {F, "?MODULE", F}; - #'Externaltypereference'{module=Mod,type=EType} -> - {lists:concat(["fun '",Mod,"':'",DecOrEnc,"_",EType,"'/",Arity]),Mod, - lists:concat(["'",DecOrEnc,"_",EType,"'"])}; - {constructed,bif} -> - F = - lists:concat(["fun '",DecOrEnc,"_", - asn1ct_gen:list2name([Cname|TopType]),"'/", - Arity]), - {F, "?MODULE", F}; - 'ASN1_OPEN_TYPE' -> - case Arity of - 3 -> - F = lists:concat(["fun(A,_,C) -> ?RT_BER:decode_open_type(",Erule,",A,C) end"]), - {F, "?MODULE", F}; - 4 -> - F = lists:concat(["fun(A,_,C,_) -> ?RT_BER:decode_open_type(",Erule,",A,C) end"]), - {F, "?MODULE", F} - end - end. - -empty_lb(ber) -> - "[]"; -empty_lb(ber_bin) -> - "<<>>". - -rtmod(ber) -> - list_to_atom(?RT_BER_BIN); -rtmod(ber_bin) -> - list_to_atom(?RT_BER_BIN). - -indefend_match(ber,used_var) -> - "[0,0|R]"; -indefend_match(ber,unused_var) -> - "[0,0|_R]"; -indefend_match(ber_bin,used_var) -> - "<<0,0,R/binary>>"; -indefend_match(ber_bin,unused_var) -> - "<<0,0,_R/binary>>". - -notice_value_match() -> - Module = get(currmod), - put(value_match,{true,Module}). - -value_match(Index,Value) when is_atom(Value) -> - value_match(Index,atom_to_list(Value)); -value_match([],Value) -> - Value; -value_match([{VI,_Cname}|VIs],Value) -> - value_match1(Value,VIs,lists:concat(["element(",VI,","]),1). -value_match1(Value,[],Acc,Depth) -> - Acc ++ Value ++ lists:concat(lists:duplicate(Depth,")")); -value_match1(Value,[{VI,_Cname}|VIs],Acc,Depth) -> - value_match1(Value,VIs,Acc++lists:concat(["element(",VI,","]),Depth+1). diff --git a/lib/asn1/src/asn1ct_constructed_ber_bin_v2.erl b/lib/asn1/src/asn1ct_constructed_ber_bin_v2.erl index 2c4b44996d..78cb9297d8 100644 --- a/lib/asn1/src/asn1ct_constructed_ber_bin_v2.erl +++ b/lib/asn1/src/asn1ct_constructed_ber_bin_v2.erl @@ -32,7 +32,6 @@ -include("asn1_records.hrl"). -import(asn1ct_gen, [emit/1,demit/1,get_record_name_prefix/0]). --import(asn1ct_constructed_ber,[match_tag/2]). -define(ASN1CT_GEN_BER,asn1ct_gen_ber_bin_v2). @@ -913,7 +912,7 @@ gen_dec_choice_cases(Erules,TopType, [H|T]) -> [DecTag],Type}), asn1ct:update_gen_state(namelist,Names), emit([indent(4),{curr,res}," = ", - match_tag(ber_bin,{FirstT#tag.class,FirstT#tag.number}), + match_tag(FirstT#tag.class, FirstT#tag.number), " -> ",nl]), emit([indent(8),"{",{asis,Cname},", {'", asn1ct_gen:list2name([Cname|TopType]),"',", @@ -928,7 +927,25 @@ gen_dec_choice_cases(Erules,TopType, [H|T]) -> end, gen_dec_choice_cases(Erules,TopType, T). +match_tag(Class, TagNo) when is_integer(TagNo) -> + match_tag1(asn1ct_gen_ber_bin_v2:decode_class(Class), TagNo). +match_tag1(Class, TagNo) when TagNo =< 30 -> + io_lib:format("<<~p:2,_:1,~p:5,_/binary>>", [Class bsr 6,TagNo]); +match_tag1(Class, TagNo) -> + Octets = mk_object_val(TagNo), + io_lib:format("<<~p:2,_:1,31:5,~s,_/binary>>", [Class bsr 6,Octets]). + +mk_object_val(Val) when Val < 16#80 -> + integer_to_list(Val); +mk_object_val(Val) -> + mk_object_val(Val bsr 7, [integer_to_list(Val band 16#7F)]). + +mk_object_val(0, Acc) -> + Acc; +mk_object_val(Val, Acc) -> + I = integer_to_list((Val band 16#7F) bor 16#80), + mk_object_val(Val bsr 7, [I,","|Acc]). %%--------------------------------------- %% Generate the encode/decode code @@ -1493,10 +1510,6 @@ mkfuncname(TopType,Cname,WhatKind,Prefix,Suffix) -> end. empty_lb(ber) -> - "[]"; -empty_lb(ber_bin) -> - "<<>>"; -empty_lb(ber_bin_v2) -> "<<>>". value_match(Index,Value) when is_atom(Value) -> diff --git a/lib/asn1/src/asn1ct_constructed_per.erl b/lib/asn1/src/asn1ct_constructed_per.erl index 8de41a4dd4..b29a7b3048 100644 --- a/lib/asn1/src/asn1ct_constructed_per.erl +++ b/lib/asn1/src/asn1ct_constructed_per.erl @@ -76,13 +76,9 @@ gen_encode_constructed(Erule,Typename,D) when is_record(D,type) -> case {Optionals = optionals(to_textual_order(CompList)),CompList, is_optimized(Erule)} of {[],EmptyCL,_} when EmptyCL == {[],[],[]};EmptyCL == {[],[]};EmptyCL == [] -> - emit(["%%Variable setting just to eliminate ", - "compiler warning for unused vars!",nl, - "_Val = ",{curr,val},",",nl]); + ok; {[],_,_} -> - emit([{next,val}," = ?RT_PER:list_to_record("]), - emit(["'",asn1ct_gen:list2rname(Typename),"'"]), - emit([", ",{curr,val},"),",nl]); + emit([{next,val}," = ",{curr,val},",",nl]); {_,_,true} -> gen_fixoptionals(Optionals), FixOpts = param_map(fun(Var) -> @@ -155,7 +151,7 @@ gen_encode_constructed(Erule,Typename,D) when is_record(D,type) -> emit([ObjectEncode," = ",nl]), emit([" ",ObjSetMod,":'getenc_",ObjSetName,"'(", {asis,UniqueFieldName},", ",nl]), - El = make_element(N+1,asn1ct_gen:mk_var(asn1ct_name:curr(val)),AttrN), + El = make_element(N+1,asn1ct_gen:mk_var(asn1ct_name:curr(val))), Length = fun(X,_LFun) when is_atom(X) -> length(atom_to_list(X)); @@ -221,9 +217,74 @@ gen_decode_set(Erules,Typename,D) -> gen_decode_sequence(Erules,Typename,D) -> gen_decode_constructed(Erules,Typename,D). -gen_decode_constructed(Erules,Typename,D) when is_record(D,type) -> +gen_decode_constructed(Erule, Typename, #type{}=D) -> + Imm0 = gen_dec_constructed_imm(Erule, Typename, #type{}=D), + Imm = opt_imm(Imm0), asn1ct_name:start(), asn1ct_name:clear(), + emit_gen_dec_imm(Imm), + emit([".",nl,nl]). + +opt_imm(Imm0) -> + {Imm,_} = opt_imm_1(Imm0, unknown, []), + Imm. + +opt_imm_1([{imm,Imm0,F}|T], Al0, Acc) -> + {Imm,Al} = asn1ct_imm:optimize_alignment(Imm0, Al0), + opt_imm_1(T, Al, [{imm,Imm,F}|Acc]); +opt_imm_1([ignore|T], Al, Acc) -> + opt_imm_1(T, Al, Acc); +opt_imm_1([{ignore,_}=H|T], Al, Acc) -> + opt_imm_1(T, Al, [H|Acc]); +opt_imm_1([{safe,ignore}|T], Al, Acc) -> + opt_imm_1(T, Al, Acc); +opt_imm_1([{safe,_}=H|T], Al, Acc) -> + opt_imm_1(T, Al, [H|Acc]); +opt_imm_1([{group,G0}|T], Al0, Acc) -> + {G,Al} = opt_imm_1(G0, Al0, []), + opt_imm_1(T, Al, [{group,G}|Acc]); +opt_imm_1([Emit|T], _, Acc) when is_function(Emit, 1) -> + opt_imm_1(T, unknown, [Emit|Acc]); +opt_imm_1([], Al, Acc) -> + {lists:reverse(Acc),Al}. + +emit_gen_dec_imm(L) -> + emit_gen_dec_imm(L, "", []). + +emit_gen_dec_imm([{ignore,Fun}|T], Sep, St0) -> + St = Fun(St0), + emit_gen_dec_imm(T, Sep, St); +emit_gen_dec_imm([{group,L}|T], Sep, St0) -> + emit(Sep), + St = emit_gen_dec_imm_group(L, St0), + emit_gen_dec_imm(T, [com,nl], St); +emit_gen_dec_imm([{imm,Imm,Emit}|T], Sep, St0) -> + emit(Sep), + St = Emit(Imm, St0), + emit_gen_dec_imm(T, [com,nl], St); +emit_gen_dec_imm([{safe,Item}|T], Sep, St) -> + emit_gen_dec_imm([Item|T], Sep, St); +emit_gen_dec_imm([Emit|T], Sep, St0) -> + emit(Sep), + St = Emit(St0), + emit_gen_dec_imm(T, [com,nl], St); +emit_gen_dec_imm([], _, _) -> ok. + +emit_gen_dec_imm_group([H|T], St0) -> + St = emit_gen_dec_group_item(H, St0), + emit_gen_dec_imm_group(T, St); +emit_gen_dec_imm_group([], St) -> St. + +emit_gen_dec_group_item({ignore,Fun}, St) -> + Fun(St); +emit_gen_dec_group_item({imm,Imm,Fun}, St) -> + Fun(Imm, St); +emit_gen_dec_group_item({safe,Item}, St) -> + emit_gen_dec_group_item(Item, St); +emit_gen_dec_group_item(Emit, St) -> + Emit(St). + +gen_dec_constructed_imm(Erule, Typename, #type{}=D) -> {CompList,TableConsInfo} = case D#type.def of #'SEQUENCE'{tablecinf=TCI,components=CL} -> @@ -233,27 +294,19 @@ gen_decode_constructed(Erules,Typename,D) when is_record(D,type) -> {CL,TCI} % the textual order is already taken care of end, Ext = extensible_dec(CompList), - MaybeComma1 = case Ext of - {ext,_Pos,_NumExt} -> - gen_dec_extension_value("Bytes"), - {",",nl}; - _ -> - "" - end, + EmitExt = case Ext of + {ext,_Pos,_NumExt} -> + gen_dec_extension_value(); + _ -> ignore + end, Optionals = optionals(CompList), - MaybeComma2 = case Optionals of - [] -> MaybeComma1; - _ -> - Bcurr = asn1ct_name:curr(bytes), - Bnext = asn1ct_name:next(bytes), - emit(MaybeComma1), - GetoptCall = "} = ?RT_PER:getoptionals2(", - emit({"{Opt,",{var,Bnext},GetoptCall, - {var,Bcurr},",",{asis,length(Optionals)},")"}), - asn1ct_name:new(bytes), - ", " - end, - {DecObjInf,UniqueFName,ValueIndex} = + EmitOpt = case Optionals of + [] -> + ignore; + [_|_] -> + gen_dec_optionals(Optionals) + end, + ObjSetInfo = case TableConsInfo of %% {ObjectSet,AttrN,N,UniqueFieldName} ->%% N is index of attribute that determines constraint #simpletableattributes{objectsetname=ObjectSet, @@ -285,13 +338,19 @@ gen_decode_constructed(Erules,Typename,D) when is_record(D,type) -> {false,false,false} end end, -%% NewCompList = wrap_compList(CompList), - {AccTerm,AccBytes} = - gen_dec_components_call(Erules,Typename,CompList,MaybeComma2,DecObjInf,Ext,length(Optionals)), - case asn1ct_name:all(term) of - [] -> emit(MaybeComma2); % no components at all - _ -> emit({com,nl}) - end, + {DecObjInf,_,_} = ObjSetInfo, + EmitComp = gen_dec_components_call(Erule, Typename, CompList, + DecObjInf, Ext, length(Optionals)), + EmitRest = fun({AccTerm,AccBytes}) -> + gen_dec_constructed_imm_2(Typename, CompList, + ObjSetInfo, + AccTerm, AccBytes) + end, + [EmitExt,EmitOpt|EmitComp++[{safe,EmitRest}]]. + +gen_dec_constructed_imm_2(Typename, CompList, + ObjSetInfo, AccTerm, AccBytes) -> + {_,UniqueFName,ValueIndex} = ObjSetInfo, case {AccTerm,AccBytes} of {[],[]} -> ok; @@ -333,8 +392,7 @@ gen_decode_constructed(Erules,Typename,D) when is_record(D,type) -> mkvlist(textual_order(to_encoding_order(CompList),asn1ct_name:all(term))), emit("},") end, - emit({{curr,bytes},"}"}), - emit({".",nl,nl}). + emit({{curr,bytes},"}"}). textual_order([#'ComponentType'{textual_order=undefined}|_],TermList) -> TermList; @@ -516,10 +574,10 @@ gen_decode_sof(Erules,Typename,SeqOrSetOf,D) when is_record(D,type) -> _ -> "" end, - gen_decode_length(SizeConstraint, - is_optimized(Erules)), - emit({"'dec_",asn1ct_gen:list2name(Typename), - "_components'(Num, Bytes1, telltype",ObjFun,", []).",nl}), + {Num,Buf} = gen_decode_length(SizeConstraint, Erules), + emit([",",nl, + "'dec_",asn1ct_gen:list2name(Typename), + "_components'(",Num,", ",Buf,ObjFun,", []).",nl,nl]), NewComponentType = case ComponentType#type.def of {'ENUMERATED',_,Component}-> @@ -528,40 +586,13 @@ gen_decode_sof(Erules,Typename,SeqOrSetOf,D) when is_record(D,type) -> end, gen_decode_sof_components(Erules,Typename,SeqOrSetOf,NewComponentType). -%% Logic copied from asn1_per_bin_rt2ct:decode_constrained_number -gen_decode_length({Lb,Ub},true) when Ub =< 65535, Lb >= 0 -> - Range = Ub - Lb + 1, - Call = if - Range == 1 -> - "{0,Bytes}"; - Range == 2 -> - "?RT_PER:getbits(Bytes,1)"; - Range =< 4 -> - "?RT_PER:getbits(Bytes,2)"; - Range =< 8 -> - "?RT_PER:getbits(Bytes,3)"; - Range =< 16 -> - "?RT_PER:getbits(Bytes,4)"; - Range =< 32 -> - "?RT_PER:getbits(Bytes,5)"; - Range =< 64 -> - "?RT_PER:getbits(Bytes,6)"; - Range =< 128 -> - "?RT_PER:getbits(Bytes,7)"; - Range =< 255 -> - "?RT_PER:getbits(Bytes,8)"; - Range =< 256 -> - "?RT_PER:getoctets(Bytes,1)"; - Range =< 65536 -> - "?RT_PER:getoctets(Bytes,2)"; - true -> - ["exit({not_supported,{integer_range,",Range,"}}"] - end, - emit({nl,"{Val,Remain} = ",Call,",",nl}), - emit({nl,"{Num,Bytes1} = {Val+",Lb,",Remain},",nl}); -gen_decode_length(SizeConstraint,_) -> - emit({nl,"{Num,Bytes1} = ?RT_PER:decode_length(Bytes,", - {asis,SizeConstraint},"),",nl}). +is_aligned(per) -> true; +is_aligned(uper) -> false. + +gen_decode_length(Constraint, Erule) -> + emit(["%% Length with constraint ",{asis,Constraint},nl]), + Imm = asn1ct_imm:per_dec_length(Constraint, true, is_aligned(Erule)), + asn1ct_imm:dec_slim_cg(Imm, "Bytes"). gen_encode_sof_components(Erule,Typename,SeqOrSetOf,Cont) -> {ObjFun,ObjFun_Var} = @@ -583,8 +614,7 @@ gen_encode_sof_components(Erule,Typename,SeqOrSetOf,Cont) -> Conttype = asn1ct_gen:get_inner(Cont#type.def), Currmod = get(currmod), - Ctgenmod = list_to_atom(lists:concat(["asn1ct_gen_",per, - asn1ct_gen:rt2ct_suffix()])), + Ctgenmod = asn1ct_gen:ct_gen_module(Erule), case asn1ct_gen:type(Conttype) of {primitive,bif} -> gen_encode_prim_wrapper(Ctgenmod,Erule,Cont,false,"H"); @@ -614,16 +644,15 @@ gen_decode_sof_components(Erule,Typename,SeqOrSetOf,Cont) -> {"",""} end, emit({"'dec_",asn1ct_gen:list2name(Typename), - "_components'(0, Bytes, _",ObjFun_Var,", Acc) ->",nl, + "_components'(0, Bytes",ObjFun_Var,", Acc) ->",nl, indent(3),"{lists:reverse(Acc), Bytes};",nl}), emit({"'dec_",asn1ct_gen:list2name(Typename), - "_components'(Num, Bytes, _",ObjFun,", Acc) ->",nl}), + "_components'(Num, Bytes",ObjFun,", Acc) ->",nl}), emit({indent(3),"{Term,Remain} = "}), Constructed_Suffix = asn1ct_gen:constructed_suffix(SeqOrSetOf, Cont#type.def), Conttype = asn1ct_gen:get_inner(Cont#type.def), - Ctgenmod = list_to_atom(lists:concat(["asn1ct_gen_",per, - asn1ct_gen:rt2ct_suffix()])), + Ctgenmod = asn1ct_gen:ct_gen_module(Erule), CurrMod = get(currmod), case asn1ct_gen:type(Conttype) of {primitive,bif} -> @@ -647,7 +676,7 @@ gen_decode_sof_components(Erule,Typename,SeqOrSetOf,Cont) -> emit({"'dec_",Conttype,"'(Bytes,telltype),",nl}) end, emit({indent(3),"'dec_",asn1ct_gen:list2name(Typename), - "_components'(Num-1, Remain, telltype",ObjFun,", [Term|Acc]).",nl}). + "_components'(Num-1, Remain",ObjFun,", [Term|Acc]).",nl}). %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% @@ -718,10 +747,25 @@ extgrouppos([_|T],ActualPos,VirtualPos,Len,Acc) -> extgrouppos(T,ActualPos,VirtualPos,Len+1,Acc). - -gen_dec_extension_value(_) -> - emit({"{Ext,",{next,bytes},"} = ?RT_PER:getext(",{curr,bytes},")"}), - asn1ct_name:new(bytes). +gen_dec_extension_value() -> + Imm0 = {get_bits,1,[1]}, + E = fun(Imm, _) -> + emit(["{Ext,",{next,bytes},"} = "]), + BytesVar = asn1ct_gen:mk_var(asn1ct_name:curr(bytes)), + asn1ct_imm:dec_code_gen(Imm, BytesVar), + asn1ct_name:new(bytes) + end, + {imm,Imm0,E}. + +gen_dec_optionals(Optionals) -> + Imm0 = {get_bits,length(Optionals),[1]}, + E = fun(Imm, _) -> + BytesVar = asn1ct_gen:mk_var(asn1ct_name:curr(bytes)), + emit(["{Opt,",{next,bytes},"} = "]), + asn1ct_imm:dec_code_gen(Imm, BytesVar), + asn1ct_name:new(bytes) + end, + {imm,Imm0,E}. gen_fixoptionals([{Pos,Def}|R]) -> asn1ct_name:new(fixopt), @@ -889,7 +933,7 @@ gen_enc_components_call1(_Erule,_TopType,[],Pos,_,_,_) -> Pos. gen_enc_component_default(Erule,TopType,Cname,Type,Pos,DynamicEnc,Ext,DefaultVal) -> - Element = make_element(Pos+1,asn1ct_gen:mk_var(asn1ct_name:curr(val)),Cname), + Element = make_element(Pos+1,asn1ct_gen:mk_var(asn1ct_name:curr(val))), emit({"case ",Element," of",nl}), % emit({"asn1_DEFAULT -> [];",nl}), emit({"DFLT when DFLT == asn1_DEFAULT; DFLT == ",{asis,DefaultVal}," -> [];",nl}), @@ -909,7 +953,7 @@ gen_enc_component_optional(Erule,TopType,Cname, components=_ExtGroupCompList}}, Pos,DynamicEnc,Ext) when is_integer(Number) -> - Element = make_element(Pos+1,asn1ct_gen:mk_var(asn1ct_name:curr(val)),Cname), + Element = make_element(Pos+1,asn1ct_gen:mk_var(asn1ct_name:curr(val))), emit({"case ",Element," of",nl}), emit({"asn1_NOVALUE -> [];",nl}), @@ -922,7 +966,7 @@ gen_enc_component_optional(Erule,TopType,Cname, gen_enc_line(Erule,TopType,Cname,Type,NextElement, Pos,DynamicEnc,Ext), emit({nl,"end"}); gen_enc_component_optional(Erule,TopType,Cname,Type,Pos,DynamicEnc,Ext) -> - Element = make_element(Pos+1,asn1ct_gen:mk_var(asn1ct_name:curr(val)),Cname), + Element = make_element(Pos+1,asn1ct_gen:mk_var(asn1ct_name:curr(val))), emit({"case ",Element," of",nl}), emit({"asn1_NOVALUE -> [];",nl}), @@ -942,11 +986,10 @@ gen_enc_component_mandatory(Erule,TopType,Cname,Type,Pos,DynamicEnc,Ext) -> gen_enc_line(Erule,TopType,Cname,Type,[],Pos,DynamicEnc,Ext). gen_enc_line(Erule,TopType, Cname, Type, [], Pos,DynamicEnc,Ext) -> - Element = make_element(Pos+1,asn1ct_gen:mk_var(asn1ct_name:curr(val)),Cname), + Element = make_element(Pos+1,asn1ct_gen:mk_var(asn1ct_name:curr(val))), gen_enc_line(Erule,TopType,Cname,Type,Element, Pos,DynamicEnc,Ext); gen_enc_line(Erule,TopType,Cname,Type,Element, _Pos,DynamicEnc,Ext) -> - Ctgenmod = list_to_atom(lists:concat(["asn1ct_gen_",per, - asn1ct_gen:rt2ct_suffix()])), + Ctgenmod = asn1ct_gen:ct_gen_module(Erule), Atype = case Type of #type{def=#'ObjectClassFieldType'{type=InnerType}} -> @@ -1036,53 +1079,79 @@ gen_enc_line(Erule,TopType,Cname,Type,Element, _Pos,DynamicEnc,Ext) -> emit("))"); _ -> true end. -gen_dec_components_call(Erule,TopType,{Root,ExtList},MaybeComma, + +gen_dec_components_call(Erule, TopType, {Root,ExtList}, + DecInfObj, Ext, NumberOfOptionals) -> + gen_dec_components_call(Erule,TopType,{Root,ExtList,[]}, + DecInfObj,Ext,NumberOfOptionals); +gen_dec_components_call(Erule,TopType,CL={Root1,ExtList,Root2}, DecInfObj,Ext,NumberOfOptionals) -> - gen_dec_components_call(Erule,TopType,{Root,ExtList,[]},MaybeComma,DecInfObj,Ext,NumberOfOptionals); -gen_dec_components_call(Erule,TopType,CL={Root1,ExtList,Root2},MaybeComma,DecInfObj,Ext,NumberOfOptionals) -> %% The type has extensionmarker - OptTable = create_optionality_table(Root1++Root2), - {Rpos,AccTerm,AccBytes} = - gen_dec_components_call1(Erule,TopType, Root1++Root2, 1, OptTable, - MaybeComma,DecInfObj,noext,[],[], - NumberOfOptionals), - emit([",",nl,"{Extensions,",{next,bytes},"} = "]), - emit(["?RT_PER:getextension(Ext,",{curr,bytes},"),",nl]), - asn1ct_name:new(bytes), + Init = {ignore,fun(_) -> {[],[]} end}, + {EmitRoot,Tpos} = + gen_dec_comp_calls(Root1++Root2, Erule, TopType, OptTable, + DecInfObj, noext, NumberOfOptionals, + 1, []), + EmitGetExt = gen_dec_get_extension(Erule), {extgrouppos,ExtGroupPosLen} = extgroup_pos_and_length(CL), - NewExtList = wrap_extensionAdditionGroups(ExtList,ExtGroupPosLen), - {_Epos,AccTermE,AccBytesE} = - gen_dec_components_call1(Erule,TopType,NewExtList,Rpos, OptTable, - "",DecInfObj,Ext,[],[],NumberOfOptionals), - case ExtList of - [] -> true; - _ -> emit([",",nl]) - end, - emit([{next,bytes},"= ?RT_PER:skipextensions(",{curr,bytes},",", - length(ExtList)+1,",Extensions)",nl]), - asn1ct_name:new(bytes), - {AccTerm++AccTermE,AccBytes++AccBytesE}; - -gen_dec_components_call(Erule,TopType,CompList,MaybeComma,DecInfObj, - Ext,NumberOfOptionals) -> + NewExtList = wrap_extensionAdditionGroups(ExtList, ExtGroupPosLen), + {EmitExts,_} = gen_dec_comp_calls(NewExtList, Erule, TopType, OptTable, + DecInfObj, Ext, NumberOfOptionals, + Tpos, []), + Finish = + fun(St) -> + emit([{next,bytes},"= ?RT_PER:skipextensions(",{curr,bytes},",", + length(ExtList)+1,",Extensions)"]), + asn1ct_name:new(bytes), + St + end, + [Init] ++ EmitRoot ++ [EmitGetExt|EmitExts] ++ [Finish]; +gen_dec_components_call(Erule, TopType, CompList, DecInfObj, + Ext, NumberOfOptionals) -> %% The type has no extensionmarker OptTable = create_optionality_table(CompList), - {_,AccTerm,AccBytes} = - gen_dec_components_call1(Erule,TopType, CompList, 1, OptTable, - MaybeComma,DecInfObj,Ext,[],[], - NumberOfOptionals), - {AccTerm,AccBytes}. - - -gen_dec_components_call1(Erule,TopType, - [C=#'ComponentType'{name=Cname,typespec=Type,prop=Prop,textual_order=TextPos}|Rest], - Tpos,OptTable,MaybeComma,DecInfObj,Ext,AccTerm,AccBytes,NumberOfOptionals) -> + Init = {ignore,fun(_) -> {[],[]} end}, + {Cs,_} = gen_dec_comp_calls(CompList, Erule, TopType, OptTable, + DecInfObj, Ext, NumberOfOptionals, + 1, []), + [Init|Cs]. + +gen_dec_get_extension(Erule) -> + Imm0 = asn1ct_imm:per_dec_extension_map(is_aligned(Erule)), + E = fun(Imm, St) -> + emit([nl,"%% Extensions", + nl, + "{Extensions,",{next,bytes},"} = ", + "case Ext of",nl, + "0 -> {<<>>,",{curr,bytes},"};",nl, + "1 ->",nl]), + BytesVar = asn1ct_gen:mk_var(asn1ct_name:curr(bytes)), + {Dst,DstBuf} = asn1ct_imm:dec_slim_cg(Imm, BytesVar), + emit([com,nl, + "{",Dst,",",DstBuf,"}",nl, + "end"]), + asn1ct_name:new(bytes), + St + end, + {imm,Imm0,E}. + +gen_dec_comp_calls([C|Cs], Erule, TopType, OptTable, DecInfObj, + Ext, NumberOfOptionals, Tpos, Acc) -> + L = gen_dec_comp_call(C, Erule, TopType, Tpos, OptTable, DecInfObj, + Ext, NumberOfOptionals), + gen_dec_comp_calls(Cs, Erule, TopType, OptTable, DecInfObj, + Ext, NumberOfOptionals, Tpos+1, [L|Acc]); +gen_dec_comp_calls([], _, _, _, _, _, _, Tpos, Acc) -> + {lists:append(lists:reverse(Acc)),Tpos}. + +gen_dec_comp_call(Comp, Erule, TopType, Tpos, OptTable, DecInfObj, + Ext, NumberOfOptionals) -> + #'ComponentType'{typespec=Type,prop=Prop,textual_order=TextPos} = Comp, Pos = case Ext of noext -> Tpos; {ext,Epos,_Enum} -> Tpos - Epos + 1 end, - emit(MaybeComma), InnerType = case Type#type.def of #'ObjectClassFieldType'{type=InType} -> @@ -1091,109 +1160,128 @@ gen_dec_components_call1(Erule,TopType, asn1ct_gen:get_inner(Def) end, - case InnerType of - #'Externaltypereference'{type=T} -> - emit({nl,"%% attribute number ",TextPos," with type ", - T,nl}); - IT when is_tuple(IT) -> - emit({nl,"%% attribute number ",TextPos," with type ", - element(2,IT),nl}); - _ -> - emit({nl,"%% attribute number ",TextPos," with type ", - InnerType,nl}) - end, - - IsMandatoryAndPredefinedTableC = - fun(noext,mandatory,{"got objfun through args","ObjFun"}) -> - true; - (_,_,{"got objfun through args","ObjFun"}) -> - false; - (_,_,_) -> - true - end, - case {InnerType,IsMandatoryAndPredefinedTableC(Ext,Prop,DecInfObj)} of -%% {typefield,_} when Ext == noext, Prop == mandatory -> - {{typefield,_},true} -> - %% DecInfObj /= {"got objfun through args","ObjFun"} | - %% (DecInfObj == {"got objfun through args","ObjFun"} & - %% Ext == noext & Prop == mandatory) - asn1ct_name:new(term), - asn1ct_name:new(tmpterm), - emit({"{",{curr,tmpterm},", ",{next,bytes},"} = "}); + DispType = case InnerType of + #'Externaltypereference'{type=T} -> T; + IT when is_tuple(IT) -> element(2,IT); + _ -> InnerType + end, + Comment = fun(St) -> + emit([nl,"%% attribute number ",TextPos, + " with type ",DispType,nl]), + St + end, + + Preamble = + case {InnerType,is_mandatory_predef_tab_c(Ext, Prop, DecInfObj)} of + {{typefield,_},true} -> + %% DecInfObj /= {"got objfun through args","ObjFun"} | + %% (DecInfObj == {"got objfun through args","ObjFun"} & + %% Ext == noext & Prop == mandatory) + fun(St) -> + asn1ct_name:new(term), + asn1ct_name:new(tmpterm), + emit(["{",{curr,tmpterm},", ",{next,bytes},"} = "]), + St + end; %%{objectfield,_,_} when Ext == noext, Prop == mandatory -> - {{objectfield,_,_},true} -> - asn1ct_name:new(term), - asn1ct_name:new(tmpterm), - emit({"{",{curr,tmpterm},", ",{next,bytes},"} = "}); + {{objectfield,_,_},true} -> + fun(St) -> + asn1ct_name:new(term), + asn1ct_name:new(tmpterm), + emit(["{",{curr,tmpterm},", ",{next,bytes},"} = "]), + St + end; _ -> case Type of #type{def=#'SEQUENCE'{ extaddgroup=Number1, components=ExtGroupCompList1}} when is_integer(Number1)-> - emit({"{{_,"}), - emit_extaddgroupTerms(term,ExtGroupCompList1), - emit({"}"}); - _ -> - asn1ct_name:new(term), - emit({"{",{curr,term}}) - end, - emit({",",{next,bytes},"} = "}) - end, - - case {Ext,Prop,is_optimized(Erule)} of - {noext,mandatory,_} -> ok; % generate nothing - {noext,_,_} -> %% OPTIONAL or DEFAULT - OptPos = get_optionality_pos(TextPos,OptTable), - Element = io_lib:format("Opt band (1 bsl ~w)",[NumberOfOptionals - OptPos]), - emit(["case ",Element," of",nl]), - emit([" _Opt",TextPos," when _Opt",TextPos," > 0 ->"]); - {_,_,false} -> %% extension element, not bitstring - emit(["case Extensions of",nl]), - emit([" _ when size(Extensions) >= ",Pos,",element(",Pos,",Extensions) == 1 ->",nl]); - _ -> - emit(["case Extensions of",nl]), - emit([" <<_:",Pos-1,",1:1,_/bitstring>> when bit_size(Extensions) >= ",Pos," ->",nl]) - end, - put(component_type,{true,C}), - {TermVar,BytesVar} = gen_dec_line(Erule,TopType,Cname,Type,Tpos,DecInfObj,Ext,Prop), - erase(component_type), - case {Ext,Prop} of - {noext,mandatory} -> true; % generate nothing - {noext,_} -> - emit([";",nl,"0 ->"]), - emit(["{"]), - gen_dec_component_no_val(Ext,Prop), - emit({",",{curr,bytes},"}",nl}), - emit([nl,"end"]); - _ -> - emit([";",nl,"_ ->",nl]), - emit(["{"]), - case Type of - #type{def=#'SEQUENCE'{ - extaddgroup=Number2, - components=ExtGroupCompList2}} when is_integer(Number2)-> - emit({"{extAddGroup,"}), - gen_dec_extaddGroup_no_val(Ext,ExtGroupCompList2), - emit({"}"}); + fun(St) -> + emit(["{{_,"]), + emit_extaddgroupTerms(term,ExtGroupCompList1), + emit(["}"]), + emit([",",{next,bytes},"} = "]), + St + end; _ -> - gen_dec_component_no_val(Ext,Prop) - end, - emit({",",{curr,bytes},"}",nl}), - emit([nl,"end"]) - end, - asn1ct_name:new(bytes), - case Rest of - [] -> - {Tpos+1,AccTerm++TermVar,AccBytes++BytesVar}; - _ -> - emit({com,nl}), - gen_dec_components_call1(Erule,TopType,Rest,Tpos+1,OptTable, - "",DecInfObj,Ext, AccTerm++TermVar, - AccBytes++BytesVar,NumberOfOptionals) - end; + fun(St) -> + asn1ct_name:new(term), + emit(["{",{curr,term}]), + emit([",",{next,bytes},"} = "]), + St + end + end + end, -gen_dec_components_call1(_,_TopType,[],Pos,_OptTable,_,_,_,AccTerm,AccBytes,_NumberOfOptionals) -> - {Pos,AccTerm,AccBytes}. + OptOrDef = + case {Ext,Prop} of + {noext,mandatory} -> + ignore; + {noext,_} -> %% OPTIONAL or DEFAULT + OptPos = get_optionality_pos(TextPos, OptTable), + Element = io_lib:format("Opt band (1 bsl ~w)", + [NumberOfOptionals - OptPos]), + fun(St) -> + emit(["case ",Element," of",nl]), + emit([" _Opt",TextPos," when _Opt",TextPos," > 0 ->"]), + St + end; + {{ext,_,_},_} -> %Extension + fun(St) -> + emit(["case Extensions of",nl, + " <<_:",Pos-1,",1:1,_/bitstring>> ->",nl]), + St + end + end, + Lines = gen_dec_line_imm(Erule, TopType, Comp, Tpos, DecInfObj, Ext), + Postamble = + case {Ext,Prop} of + {noext,mandatory} -> + ignore; + {noext,_} -> + fun(St) -> + emit([";",nl,"0 ->"]), + emit(["{"]), + gen_dec_component_no_val(Ext,Prop), + emit({",",{curr,bytes},"}",nl}), + emit([nl,"end"]), + St + end; + _ -> + fun(St) -> + emit([";",nl,"_ ->",nl]), + emit(["{"]), + case Type of + #type{def=#'SEQUENCE'{ + extaddgroup=Number2, + components=ExtGroupCompList2}} + when is_integer(Number2)-> + emit({"{extAddGroup,"}), + gen_dec_extaddGroup_no_val(Ext,ExtGroupCompList2), + emit({"}"}); + _ -> + gen_dec_component_no_val(Ext, Prop) + end, + emit({",",{curr,bytes},"}",nl}), + emit([nl,"end"]), + St + end + end, + AdvBuffer = {ignore,fun(St) -> + asn1ct_name:new(bytes), + St + end}, + [{group,[{safe,Comment},{safe,Preamble}, + {safe,OptOrDef}|Lines]++ + [{safe,Postamble},{safe,AdvBuffer}]}]. + +is_mandatory_predef_tab_c(noext, mandatory, + {"got objfun through args","ObjFun"}) -> + true; +is_mandatory_predef_tab_c(_, _, {"got objfun through args","ObjFun"}) -> + false; +is_mandatory_predef_tab_c(_,_,_) -> + true. gen_dec_extaddGroup_no_val(Ext,[#'ComponentType'{prop=Prop}])-> gen_dec_component_no_val(Ext,Prop), @@ -1213,9 +1301,14 @@ gen_dec_component_no_val({ext,_,_},mandatory) -> emit({"asn1_NOVALUE"}). -gen_dec_line(Erule,TopType,Cname,Type,Pos,DecInfObj,Ext,Prop) -> - Ctgenmod = list_to_atom(lists:concat(["asn1ct_gen_",per, - asn1ct_gen:rt2ct_suffix()])), +gen_dec_line(Erule, TopType, Comp, Pos, DecInfObj, Ext) -> + Imm0 = gen_dec_line_imm(Erule, TopType, Comp, Pos, DecInfObj, Ext), + Init = {ignore,fun(_) -> {[],[]} end}, + Imm = [{group,[Init|Imm0]}], + emit_gen_dec_imm(Imm). + +gen_dec_line_imm(Erule, TopType, Comp, Pos, DecInfObj, Ext) -> + #'ComponentType'{name=Cname,typespec=Type} = Comp, Atype = case Type of #type{def=#'ObjectClassFieldType'{type=InnerType}} -> @@ -1224,175 +1317,235 @@ gen_dec_line(Erule,TopType,Cname,Type,Pos,DecInfObj,Ext,Prop) -> asn1ct_gen:get_inner(Type#type.def) end, - BytesVar0 = asn1ct_gen:mk_var(asn1ct_name:curr(bytes)), - BytesVar = case Ext of - {ext,Ep,_} when Pos >= Ep -> - emit(["begin",nl,"{TmpVal",Pos,",Trem",Pos, - "}=?RT_PER:decode_open_type(", - {curr,bytes},",[]),",nl, - "{TmpValx",Pos,",_}="]), - io_lib:format("TmpVal~p",[Pos]); - _ -> BytesVar0 - end, - SaveBytes = - case Atype of - {typefield,_} -> - case DecInfObj of - false -> % This is in a choice with typefield components - {Name,RestFieldNames} = - (Type#type.def)#'ObjectClassFieldType'.fieldname, - - asn1ct_name:new(tmpterm), - asn1ct_name:new(reason), - emit([indent(2),"{",{curr,tmpterm},", ",{next,bytes}, - "} = ?RT_PER:decode_open_type(",{curr,bytes}, - ", []),",nl]), - emit([indent(2),"case (catch ObjFun(", - {asis,Name},",",{curr,tmpterm},",telltype,", - {asis,RestFieldNames},")) of", nl]), - emit([indent(4),"{'EXIT',",{curr,reason},"} ->",nl]), - emit([indent(6),"exit({'Type not ", - "compatible with table constraint', ", - {curr,reason},"});",nl]), - asn1ct_name:new(tmpterm), - emit([indent(4),"{",{curr,tmpterm},", _} ->",nl]), - emit([indent(6),"{",{asis,Cname},", {",{curr,tmpterm},", ", - {next,bytes},"}}",nl]), - emit([indent(2),"end"]), - []; - {"got objfun through args","ObjFun"} -> - %% this is when the generated code gots the - %% objfun though arguments on function - %% invocation. - if - Ext == noext andalso Prop == mandatory -> - ok; - true -> - asn1ct_name:new(tmpterm), - asn1ct_name:new(tmpbytes), - emit([nl," {",{curr,tmpterm},", ",{curr,tmpbytes},"} ="]) - end, - {Name,RestFieldNames} = - (Type#type.def)#'ObjectClassFieldType'.fieldname, - emit(["?RT_PER:decode_open_type(",{curr,bytes}, - ", []),",nl]), - if - Ext == noext andalso Prop == mandatory -> - emit([{curr,term}," =",nl," "]); - true -> - emit([" {"]) - end, - emit(["case (catch ObjFun(",{asis,Name},",", - {curr,tmpterm},",telltype,", - {asis,RestFieldNames},")) of", nl]), - emit([" {'EXIT',",{curr,reason},"} ->",nl]), - emit([indent(6),"exit({'Type not ", - "compatible with table constraint', ", - {curr,reason},"});",nl]), - asn1ct_name:new(tmpterm), - emit([indent(4),"{",{curr,tmpterm},", _} ->",nl]), - emit([indent(6),{curr,tmpterm},nl]), - emit([indent(2),"end"]), - if - Ext == noext andalso Prop == mandatory -> - ok; - true -> - emit([",",nl,{curr,tmpbytes},"}"]) - end, - []; - _ -> - emit(["?RT_PER:decode_open_type(",{curr,bytes}, - ", [])"]), - RefedFieldName = - (Type#type.def)#'ObjectClassFieldType'.fieldname, - - [{Cname,RefedFieldName, - asn1ct_gen:mk_var(asn1ct_name:curr(term)), - asn1ct_gen:mk_var(asn1ct_name:curr(tmpterm)), - get_components_prop()}] - end; - {objectfield,PrimFieldName1,PFNList} -> - emit(["?RT_PER:decode_open_type(",{curr,bytes},", [])"]), - [{Cname,{PrimFieldName1,PFNList}, - asn1ct_gen:mk_var(asn1ct_name:curr(term)), - asn1ct_gen:mk_var(asn1ct_name:curr(tmpterm)), - get_components_prop()}]; - _ -> - CurrMod = get(currmod), - case asn1ct_gen:type(Atype) of - #'Externaltypereference'{module=CurrMod,type=EType} -> - emit({"'dec_",EType,"'(",BytesVar,",telltype)"}); - #'Externaltypereference'{module=Mod,type=EType} -> - emit({"'",Mod,"':'dec_",EType,"'(",BytesVar, - ",telltype)"}); - {primitive,bif} -> - case Atype of - {fixedtypevaluefield,_,Btype} -> - Ctgenmod:gen_dec_prim(Erule,Btype, - BytesVar); - _ -> - Ctgenmod:gen_dec_prim(Erule,Type, - BytesVar) - end; - 'ASN1_OPEN_TYPE' -> - case Type#type.def of - #'ObjectClassFieldType'{type=OpenType} -> - Ctgenmod:gen_dec_prim(Erule,#type{def=OpenType}, - BytesVar); - _ -> - Ctgenmod:gen_dec_prim(Erule,Type, - BytesVar) - end; - #typereference{val=Dname} -> - emit({"'dec_",Dname,"'(",BytesVar,",telltype)"}); - {notype,_} -> - emit({"'dec_",Atype,"'(",BytesVar,",telltype)"}); - {constructed,bif} -> - NewTypename = [Cname|TopType], - case Type#type.tablecinf of - [{objfun,_}|_R] -> - emit({"'dec_",asn1ct_gen:list2name(NewTypename), - "'(",BytesVar,", telltype, ObjFun)"}); - _ -> - emit({"'dec_",asn1ct_gen:list2name(NewTypename), - "'(",BytesVar,", telltype)"}) - end - end, + Pre = gen_dec_line_open_type(Erule, Ext, Pos), + Decode = gen_dec_line_special(Erule, Atype, TopType, Comp, DecInfObj, Ext), + Post = + fun({SaveBytes,Finish}) -> + {AccTerm,AccBytes} = Finish(), + #'ComponentType'{name=Cname} = Comp, case DecInfObj of - {Cname,{_,OSet,UniqueFName,ValIndex}} -> - Term = asn1ct_gen:mk_var(asn1ct_name:curr(term)), - ValueMatch = value_match(ValIndex,Term), - {ObjSetMod,ObjSetName} = - case OSet of - {M,O} -> {{asis,M},O}; - _ -> {"?MODULE",OSet} + {Cname,ObjSet} -> + ObjSetRef = + case ObjSet of + {deep,OSName,_,_} -> + OSName; + _ -> ObjSet end, - emit({",",nl,"ObjFun = ",ObjSetMod, - ":'getdec_",ObjSetName,"'(", - {asis,UniqueFName},", ",ValueMatch,")"}); + {AccTerm++[{ObjSetRef,Cname, + asn1ct_gen:mk_var(asn1ct_name:curr(term))}], + AccBytes++SaveBytes}; _ -> - ok - end, - [] + {AccTerm,AccBytes++SaveBytes} + end end, - case Ext of - {ext,Ep2,_} when Pos >= Ep2 -> - emit([", {TmpValx",Pos,",Trem",Pos,"}",nl,"end"]); - _ -> true - end, - %% Prepare return value + [Pre,Decode,{safe,Post}]. + +gen_dec_line_open_type(Erule, {ext,Ep,_}, Pos) when Pos >= Ep -> + Imm = asn1ct_imm:per_dec_open_type(is_aligned(Erule)), + {safe,fun(St) -> + emit(["begin",nl]), + BytesVar = asn1ct_gen:mk_var(asn1ct_name:curr(bytes)), + {Dst,DstBuf} = asn1ct_imm:dec_slim_cg(Imm, BytesVar), + emit([",",nl,"{TmpValx",Pos,",_} = "]), + {Dst, + fun() -> + emit([",",nl, + "{TmpValx",Pos,",",DstBuf,"}",nl, + "end"]), + St + end} + end}; +gen_dec_line_open_type(_, _, _) -> + {safe,fun(St) -> + {asn1ct_gen:mk_var(asn1ct_name:curr(bytes)), + fun() -> St end} + end}. + +gen_dec_line_special(_, {typefield,_}, _TopType, Comp, + DecInfObj, Ext) -> + #'ComponentType'{name=Cname,typespec=Type,prop=Prop} = Comp, + fun({_BytesVar,PrevSt}) -> + case DecInfObj of + false -> % This is in a choice with typefield components + {Name,RestFieldNames} = + (Type#type.def)#'ObjectClassFieldType'.fieldname, + + asn1ct_name:new(tmpterm), + asn1ct_name:new(reason), + emit([indent(2),"{",{curr,tmpterm},", ",{next,bytes}, + "} = ?RT_PER:decode_open_type(",{curr,bytes}, + ", []),",nl]), + emit([indent(2),"case (catch ObjFun(", + {asis,Name},",",{curr,tmpterm},",telltype,", + {asis,RestFieldNames},")) of", nl]), + emit([indent(4),"{'EXIT',",{curr,reason},"} ->",nl]), + emit([indent(6),"exit({'Type not ", + "compatible with table constraint', ", + {curr,reason},"});",nl]), + asn1ct_name:new(tmpterm), + emit([indent(4),"{",{curr,tmpterm},", _} ->",nl]), + emit([indent(6),"{",{asis,Cname},", {",{curr,tmpterm},", ", + {next,bytes},"}}",nl]), + emit([indent(2),"end"]), + {[],PrevSt}; + {"got objfun through args","ObjFun"} -> + %% this is when the generated code gots the + %% objfun though arguments on function + %% invocation. + if + Ext == noext andalso Prop == mandatory -> + ok; + true -> + asn1ct_name:new(tmpterm), + asn1ct_name:new(tmpbytes), + emit([nl," {",{curr,tmpterm},", ",{curr,tmpbytes},"} ="]) + end, + {Name,RestFieldNames} = + (Type#type.def)#'ObjectClassFieldType'.fieldname, + emit(["?RT_PER:decode_open_type(",{curr,bytes}, + ", []),",nl]), + if + Ext == noext andalso Prop == mandatory -> + emit([{curr,term}," =",nl," "]); + true -> + emit([" {"]) + end, + emit(["case (catch ObjFun(",{asis,Name},",", + {curr,tmpterm},",telltype,", + {asis,RestFieldNames},")) of", nl]), + emit([" {'EXIT',",{curr,reason},"} ->",nl]), + emit([indent(6),"exit({'Type not ", + "compatible with table constraint', ", + {curr,reason},"});",nl]), + asn1ct_name:new(tmpterm), + emit([indent(4),"{",{curr,tmpterm},", _} ->",nl]), + emit([indent(6),{curr,tmpterm},nl]), + emit([indent(2),"end"]), + if + Ext == noext andalso Prop == mandatory -> + ok; + true -> + emit([",",nl,{curr,tmpbytes},"}"]) + end, + {[],PrevSt}; + _ -> + emit(["?RT_PER:decode_open_type(",{curr,bytes}, + ", [])"]), + RefedFieldName = + (Type#type.def)#'ObjectClassFieldType'.fieldname, + + {[{Cname,RefedFieldName, + asn1ct_gen:mk_var(asn1ct_name:curr(term)), + asn1ct_gen:mk_var(asn1ct_name:curr(tmpterm)), + Prop}],PrevSt} + end + end; +gen_dec_line_special(_, {objectfield,PrimFieldName1,PFNList}, _TopType, + Comp, _DecInfObj, _Ext) -> + fun({_BytesVar,PrevSt}) -> + emit(["?RT_PER:decode_open_type(",{curr,bytes},", [])"]), + #'ComponentType'{name=Cname,prop=Prop} = Comp, + SaveBytes = [{Cname,{PrimFieldName1,PFNList}, + asn1ct_gen:mk_var(asn1ct_name:curr(term)), + asn1ct_gen:mk_var(asn1ct_name:curr(tmpterm)), + Prop}], + {SaveBytes,PrevSt} + end; +gen_dec_line_special(Erule, Atype, TopType, Comp, DecInfObj, _Ext) -> + case gen_dec_line_other(Erule, Atype, TopType, Comp) of + Fun when is_function(Fun, 1) -> + fun({BytesVar,PrevSt}) -> + Fun(BytesVar), + gen_dec_line_dec_inf(Comp, DecInfObj), + {[],PrevSt} + end; + Imm0 -> + {imm,Imm0, + fun(Imm, {BytesVar,PrevSt}) -> + asn1ct_imm:dec_code_gen(Imm, BytesVar), + gen_dec_line_dec_inf(Comp, DecInfObj), + {[],PrevSt} + end} + end. + +gen_dec_line_dec_inf(Comp, DecInfObj) -> + #'ComponentType'{name=Cname} = Comp, case DecInfObj of - {Cname,ObjSet} -> - ObjSetRef = - case ObjSet of - {deep,OSName,_,_} -> - OSName; - _ -> ObjSet + {Cname,{_,OSet,UniqueFName,ValIndex}} -> + Term = asn1ct_gen:mk_var(asn1ct_name:curr(term)), + ValueMatch = value_match(ValIndex,Term), + {ObjSetMod,ObjSetName} = + case OSet of + {M,O} -> {{asis,M},O}; + _ -> {"?MODULE",OSet} end, - {[{ObjSetRef,Cname,asn1ct_gen:mk_var(asn1ct_name:curr(term))}], - SaveBytes}; + emit({",",nl,"ObjFun = ",ObjSetMod, + ":'getdec_",ObjSetName,"'(", + {asis,UniqueFName},", ",ValueMatch,")"}); _ -> - {[],SaveBytes} + ok + end. + +gen_dec_line_other(Erule, Atype, TopType, Comp) -> + #'ComponentType'{name=Cname,typespec=Type} = Comp, + CurrMod = get(currmod), + Ctgenmod = asn1ct_gen:ct_gen_module(Erule), + case asn1ct_gen:type(Atype) of + #'Externaltypereference'{module=CurrMod,type=EType} -> + fun(BytesVar) -> + emit({"'dec_",EType,"'(",BytesVar,",telltype)"}) + end; + #'Externaltypereference'{module=Mod,type=EType} -> + fun(BytesVar) -> + emit({"'",Mod,"':'dec_",EType,"'(",BytesVar, + ",telltype)"}) + end; + {primitive,bif} -> + case Atype of + {fixedtypevaluefield,_,Btype} -> + gen_dec_prim(Ctgenmod, Erule, Btype); + _ -> + gen_dec_prim(Ctgenmod, Erule, Type) + end; + 'ASN1_OPEN_TYPE' -> + case Type#type.def of + #'ObjectClassFieldType'{type=OpenType} -> + gen_dec_prim(Ctgenmod, Erule, #type{def=OpenType}); + _ -> + gen_dec_prim(Ctgenmod, Erule, Type) + end; + #typereference{val=Dname} -> + fun(BytesVar) -> + emit({"'dec_",Dname,"'(",BytesVar,",telltype)"}) + end; + {notype,_} -> + fun(BytesVar) -> + emit({"'dec_",Atype,"'(",BytesVar,",telltype)"}) + end; + {constructed,bif} -> + NewTypename = [Cname|TopType], + case Type#type.tablecinf of + [{objfun,_}|_R] -> + fun(BytesVar) -> + emit({"'dec_",asn1ct_gen:list2name(NewTypename), + "'(",BytesVar,", telltype, ObjFun)"}) + end; + _ -> + fun(BytesVar) -> + emit({"'dec_",asn1ct_gen:list2name(NewTypename), + "'(",BytesVar,", telltype)"}) + end + end + end. + +gen_dec_prim(Ctgenmod, Erule, Type) -> + case asn1ct_gen_per:gen_dec_imm(Erule, Type) of + no -> + fun(BytesVar) -> + Ctgenmod:gen_dec_prim(Erule, Type, BytesVar) + end; + Imm -> + Imm end. gen_enc_choice(Erule,TopType,CompList,Ext) -> @@ -1578,22 +1731,17 @@ gen_encode_prim_wrapper(CtgenMod,Erule,Cont,DoTag,Value) -> make_elements(I,Val,ExtCnames) -> make_elements(I,Val,ExtCnames,[]). -make_elements(I,Val,[ExtCname],Acc)-> % the last one, no comma needed - Element = make_element(I,Val,ExtCname), +make_elements(I,Val,[_ExtCname],Acc)-> % the last one, no comma needed + Element = make_element(I, Val), make_elements(I+1,Val,[],[Element|Acc]); -make_elements(I,Val,[ExtCname|Rest],Acc)-> - Element = make_element(I,Val,ExtCname), +make_elements(I,Val,[_ExtCname|Rest],Acc)-> + Element = make_element(I, Val), make_elements(I+1,Val,Rest,[", ",Element|Acc]); make_elements(_I,_,[],Acc) -> lists:reverse(Acc). -make_element(I,Val,Cname) -> - case tuple_notation_allowed() of - true -> - io_lib:format("?RT_PER:cindex(~w,~s,~w)",[I,Val,Cname]); - _ -> - io_lib:format("element(~w,~s)",[I,Val]) - end. +make_element(I, Val) -> + io_lib:format("element(~w,~s)", [I,Val]). emit_extaddgroupTerms(VarSeries,[_]) -> asn1ct_name:new(VarSeries), @@ -1651,22 +1799,12 @@ wrap_extensionAdditionGroups([],_,Acc,_,_) -> lists:reverse(Acc). -tuple_notation_allowed() -> - Options = get(encoding_options), - not (lists:member(optimize,Options) orelse lists:member(uper_bin,Options)). - -wrap_gen_dec_line(Erule,C,TopType,Cname,Type,Pos,DIO,Ext) -> +wrap_gen_dec_line(Erule,C,TopType,_Cname,_Type,Pos,DIO,Ext) -> put(component_type,{true,C}), - gen_dec_line(Erule,TopType,Cname,Type,Pos,DIO,Ext,mandatory), + gen_dec_line(Erule, TopType, C#'ComponentType'{prop=mandatory}, + Pos, DIO, Ext), erase(component_type). -get_components_prop() -> - case get(component_type) of - undefined -> - mandatory; - {true,#'ComponentType'{prop=Prop}} -> Prop - end. - value_match(Index,Value) when is_atom(Value) -> value_match(Index,atom_to_list(Value)); @@ -1683,7 +1821,5 @@ notice_value_match() -> Module = get(currmod), put(value_match,{true,Module}). -is_optimized(per_bin) -> - lists:member(optimize,get(encoding_options)); -is_optimized(_Erule) -> - false. +is_optimized(per) -> true; +is_optimized(uper) -> false. diff --git a/lib/asn1/src/asn1ct_gen.erl b/lib/asn1/src/asn1ct_gen.erl index 64a3555f62..57b12ce186 100644 --- a/lib/asn1/src/asn1ct_gen.erl +++ b/lib/asn1/src/asn1ct_gen.erl @@ -37,8 +37,7 @@ gen_check_call/7, get_constraint/2, insert_once/2, - rt2ct_suffix/1, - rt2ct_suffix/0, + ct_gen_module/1, index2suffix/1, get_record_name_prefix/0]). -export([pgen/5, @@ -52,7 +51,7 @@ %% pgen(Outfile, Erules, Module, TypeOrVal, Options) %% Generate Erlang module (.erl) and (.hrl) file corresponding to an ASN.1 module %% .hrl file is only generated if necessary -%% Erules = per | ber | ber_bin | per_bin +%% Erules = per | ber %% Module = atom() %% TypeOrVal = {TypeList,ValueList} %% TypeList = ValueList = [atom()] @@ -83,7 +82,7 @@ pgen_module(OutFile,Erules,Module, pgen_exports(Erules,Module,TypeOrVal), pgen_dispatcher(Erules,Module,TypeOrVal), pgen_info(), - pgen_typeorval(wrap_ber(Erules),Module,N2nConvEnums,TypeOrVal), + pgen_typeorval(Erules,Module,N2nConvEnums,TypeOrVal), pgen_partial_incomplete_decode(Erules), % gen_vars(asn1_db:mod_to_vars(Module)), % gen_tag_table(AllTypes), @@ -92,8 +91,7 @@ pgen_module(OutFile,Erules,Module, pgen_typeorval(Erules,Module,N2nConvEnums,{Types,Values,_Ptypes,_Classes,Objects,ObjectSets}) -> - Rtmod = list_to_atom(lists:concat(["asn1ct_gen_",erule(Erules), - rt2ct_suffix(Erules)])), + Rtmod = ct_gen_module(Erules), pgen_types(Rtmod,Erules,N2nConvEnums,Module,Types), pgen_values(Erules,Module,Values), pgen_objects(Rtmod,Erules,Module,Objects), @@ -196,7 +194,7 @@ pgen_check_defaultval(Erules,Module) -> end, gen_check_defaultval(Erules,Module,CheckObjects). -pgen_partial_decode(Rtmod,Erule,Module) when Erule == ber_bin_v2 -> +pgen_partial_decode(Rtmod,Erule,Module) when Erule == ber -> pgen_partial_inc_dec(Rtmod,Erule,Module), pgen_partial_dec(Rtmod,Erule,Module); pgen_partial_decode(_,_,_) -> @@ -240,7 +238,7 @@ pgen_partial_inc_dec1(Rtmod,Erules,Module,[P|Ps]) -> pgen_partial_inc_dec1(_,_,_,[]) -> ok. -gen_partial_inc_dec_refed_funcs(Rtmod,Erule) when Erule == ber_bin_v2 -> +gen_partial_inc_dec_refed_funcs(Rtmod,Erule) when Erule == ber -> case asn1ct:next_refed_func() of [] -> ok; @@ -296,8 +294,7 @@ pgen_partial_types1(_,undefined) -> %% TypeList a decode function will be generated. traverse_type_structure(Erules,Type,[],FuncName,TopTypeName) -> %% this is the selected type - Ctmod = list_to_atom(lists:concat(["asn1ct_gen_",erule(Erules), - rt2ct_suffix(Erules)])), + Ctmod = ct_gen_module(Erules), TypeDef = case Type of #type{} -> @@ -457,7 +454,7 @@ pgen_partial_incomplete_decode(Erule) -> _ -> ok end. -pgen_partial_incomplete_decode1(ber_bin_v2) -> +pgen_partial_incomplete_decode1(ber) -> case asn1ct:read_config_data(partial_incomplete_decode) of undefined -> ok; @@ -552,20 +549,17 @@ gen_part_decode_funcs(WhatKind,_TypeName,{_,Directive,_,_}) -> gen_types(Erules,Tname,{RootL1,ExtList,RootL2}) when is_list(RootL1), is_list(RootL2) -> gen_types(Erules,Tname,RootL1), - Rtmod = list_to_atom(lists:concat(["asn1ct_gen_",erule(Erules), - rt2ct_suffix(Erules)])), + Rtmod = ct_gen_module(Erules), gen_types(Erules,Tname,Rtmod:extaddgroup2sequence(ExtList)), gen_types(Erules,Tname,RootL2); gen_types(Erules,Tname,{RootList,ExtList}) when is_list(RootList) -> gen_types(Erules,Tname,RootList), - Rtmod = list_to_atom(lists:concat(["asn1ct_gen_",erule(Erules), - rt2ct_suffix(Erules)])), + Rtmod = ct_gen_module(Erules), gen_types(Erules,Tname,Rtmod:extaddgroup2sequence(ExtList)); gen_types(Erules,Tname,[{'EXTENSIONMARK',_,_}|Rest]) -> gen_types(Erules,Tname,Rest); gen_types(Erules,Tname,[ComponentType|Rest]) -> - Rtmod = list_to_atom(lists:concat(["asn1ct_gen_",erule(Erules), - rt2ct_suffix(Erules)])), + Rtmod = ct_gen_module(Erules), asn1ct_name:clear(), Rtmod:gen_encode(Erules,Tname,ComponentType), asn1ct_name:clear(), @@ -574,8 +568,7 @@ gen_types(Erules,Tname,[ComponentType|Rest]) -> gen_types(_,_,[]) -> true; gen_types(Erules,Tname,Type) when is_record(Type,type) -> - Rtmod = list_to_atom(lists:concat(["asn1ct_gen_",erule(Erules), - rt2ct_suffix(Erules)])), + Rtmod = ct_gen_module(Erules), asn1ct_name:clear(), Rtmod:gen_encode(Erules,Tname,Type), asn1ct_name:clear(), @@ -754,8 +747,7 @@ gen_value(Value) when is_record(Value,valuedef) -> emit([{asis,V},".",nl,nl]). gen_encode_constructed(Erules,Typename,InnerType,D) when is_record(D,type) -> - - Rtmod = list_to_atom(lists:concat(["asn1ct_constructed_",erule(Erules)])), + Rtmod = ct_constructed_module(Erules), case InnerType of 'SET' -> Rtmod:gen_encode_set(Erules,Typename,D), @@ -787,7 +779,7 @@ gen_encode_constructed(Erules,Typename,InnerType,D) gen_encode_constructed(Erules,Typename,InnerType,D#typedef.typespec). gen_decode_constructed(Erules,Typename,InnerType,D) when is_record(D,type) -> - Rtmod = list_to_atom(lists:concat(["asn1ct_constructed_",erule(Erules)])), + Rtmod = ct_constructed_module(Erules), asn1ct:step_in_constructed(), %% updates namelist for exclusive decode case InnerType of 'SET' -> @@ -818,27 +810,11 @@ pgen_exports(Erules,_Module,{Types,Values,_,_,Objects,ObjectSets}) -> case Erules of ber -> gen_exports1(Types,"enc_",2); - ber_bin -> - gen_exports1(Types,"enc_",2); - ber_bin_v2 -> - gen_exports1(Types,"enc_",2); _ -> gen_exports1(Types,"enc_",1) end, emit({"-export([",nl}), - gen_exports1(Types,"dec_",2), - case Erules of - ber -> - emit({"-export([",nl}), - gen_exports1(Types,"dec_",3); - ber_bin -> - emit({"-export([",nl}), - gen_exports1(Types,"dec_",3); -% ber_bin_v2 -> -% emit({"-export([",nl}), -% gen_exports1(Types,"dec_",2); - _ -> ok - end + gen_exports1(Types,"dec_",2) end, case [X || {n2n,X} <- get(encoding_options)] of [] -> ok; @@ -863,16 +839,11 @@ pgen_exports(Erules,_Module,{Types,Values,_,_,Objects,ObjectSets}) -> gen_exports1(Objects,"enc_",3), emit({"-export([",nl}), gen_exports1(Objects,"dec_",4); - ber_bin_v2 -> + ber -> emit({"-export([",nl}), gen_exports1(Objects,"enc_",3), emit({"-export([",nl}), - gen_exports1(Objects,"dec_",3); - _ -> - emit({"-export([",nl}), - gen_exports1(Objects,"enc_",4), - emit({"-export([",nl}), - gen_exports1(Objects,"dec_",4) + gen_exports1(Objects,"dec_",3) end end, case ObjectSets of @@ -948,20 +919,17 @@ pgen_dispatcher(Erules,_Module,{Types,_Values,_,_,_Objects,_ObjectSets}) -> emit(["encoding_rule() ->",nl]), emit([" ",{asis,Erules},".",nl,nl]), NoFinalPadding = lists:member(no_final_padding,get(encoding_options)), - Call = case Erules of - per -> "?RT_PER:complete(encode_disp(Type,Data))"; - per_bin -> ["?RT_PER:complete(encode_disp(Type,Data))"]; - ber -> "encode_disp(Type,Data)"; - ber_bin -> "encode_disp(Type,Data)"; - ber_bin_v2 -> "encode_disp(Type,Data)"; - uper_bin when NoFinalPadding == true -> - "?RT_PER:complete_NFP(encode_disp(Type,Data))"; - uper_bin -> ["?RT_PER:complete(encode_disp(Type,Data))"] - end, - EncWrap = case Erules of - ber -> "wrap_encode(Bytes)"; - _ -> "Bytes" - end, + {Call,BytesAsBinary} = + case Erules of + per -> + {["?RT_PER:complete(encode_disp(Type,Data))"],"Bytes"}; + ber -> + {"encode_disp(Type,Data)","iolist_to_binary(Bytes)"}; + uper when NoFinalPadding == true -> + {"?RT_PER:complete_NFP(encode_disp(Type,Data))","Bytes"}; + uper -> + {["?RT_PER:complete(encode_disp(Type,Data))"],"Bytes"} + end, emit(["encode(Type,Data) ->",nl, "case catch ",Call," of",nl, " {'EXIT',{error,Reason}} ->",nl, @@ -969,42 +937,25 @@ pgen_dispatcher(Erules,_Module,{Types,_Values,_,_,_Objects,_ObjectSets}) -> " {'EXIT',Reason} ->",nl, " {error,{asn1,Reason}};",nl, " {Bytes,_Len} ->",nl, - " {ok,",EncWrap,"};",nl]), - case Erules of - per -> - emit([" Bytes when is_binary(Bytes) ->",nl, - " {ok,binary_to_list(Bytes)};",nl, - " Bytes ->",nl, - " {ok,binary_to_list(list_to_binary(Bytes))}",nl, - " end.",nl,nl]); - _ -> - emit([" Bytes ->",nl, - " {ok,",EncWrap,"}",nl, - "end.",nl,nl]) - end, - -% case Erules of -% ber_bin_v2 -> -% emit(["decode(Type,Data0) ->",nl]), -% emit(["{Data,_RestBin} = ?RT_BER:decode(Data0",nif_parameter(),"),",nl]); -% _ -> -% emit(["decode(Type,Data) ->",nl]) -% end, + " {ok,",BytesAsBinary,"};",nl, + " Bytes ->",nl, + " {ok,",BytesAsBinary,"}",nl, + "end.",nl,nl]), Return_rest = lists:member(undec_rest,get(encoding_options)), Data = case {Erules,Return_rest} of - {ber_bin_v2,true} -> "Data0"; + {ber,true} -> "Data0"; _ -> "Data" end, emit(["decode(Type,",Data,") ->",nl]), DecAnonymous = case {Erules,Return_rest} of - {ber_bin_v2,false} -> + {ber,false} -> io_lib:format("~s~s~s~n", ["element(1,?RT_BER:decode(Data", nif_parameter(),"))"]); - {ber_bin_v2,true} -> + {ber,true} -> emit(["{Data,Rest} = ?RT_BER:decode(Data0", nif_parameter(),"),",nl]), "Data"; @@ -1012,10 +963,8 @@ pgen_dispatcher(Erules,_Module,{Types,_Values,_,_,_Objects,_ObjectSets}) -> "Data" end, DecWrap = case Erules of - ber -> "wrap_decode(Data)"; - ber_bin_v2 -> + ber -> DecAnonymous; - per -> "list_to_binary(Data)"; _ -> "Data" end, @@ -1025,32 +974,18 @@ pgen_dispatcher(Erules,_Module,{Types,_Values,_,_,_Objects,_ObjectSets}) -> " {'EXIT',Reason} ->",nl, " {error,{asn1,Reason}};",nl]), case {Erules,Return_rest} of - {ber_bin_v2,false} -> + {ber,false} -> emit([" Result ->",nl, " {ok,Result}",nl]); - {ber_bin_v2,true} -> + {ber,true} -> emit([" Result ->",nl, " {ok,Result,Rest}",nl]); - {per,false} -> - emit([" {X,_Rest} ->",nl, - " {ok,if_binary2list(X)};",nl, - " {X,_Rest,_Len} ->",nl, - " {ok,if_binary2list(X)}",nl]); {_,false} -> emit([" {X,_Rest} ->",nl, " {ok,X};",nl, " {X,_Rest,_Len} ->",nl, " {ok,X}",nl]); - {per,true} -> - emit([" {X,{_,Rest}} ->",nl, - " {ok,if_binary2list(X),Rest};",nl, - " {X,{_,Rest},_Len} ->",nl, - " {ok,if_binary2list(X),Rest};",nl, - " {X,Rest} ->",nl, - " {ok,if_binary2list(X),Rest};",nl, - " {X,Rest,_Len} ->",nl, - " {ok,if_binary2list(X),Rest}",nl]); - {per_bin,true} -> + {per,true} -> emit([" {X,{_,Rest}} ->",nl, " {ok,X,Rest};",nl, " {X,{_,Rest},_Len} ->",nl, @@ -1059,7 +994,7 @@ pgen_dispatcher(Erules,_Module,{Types,_Values,_,_,_Objects,_ObjectSets}) -> " {ok,X,Rest};",nl, " {X,Rest,_Len} ->",nl, " {ok,X,Rest}",nl]); - {uper_bin,true} -> + {uper,true} -> emit([" {X,{_,Rest}} ->",nl, " {ok,X,Rest};",nl, " {X,{_,Rest},_Len} ->",nl, @@ -1067,34 +1002,14 @@ pgen_dispatcher(Erules,_Module,{Types,_Values,_,_,_Objects,_ObjectSets}) -> " {X,Rest} ->",nl, " {ok,X,Rest};",nl, " {X,Rest,_Len} ->",nl, - " {ok,X,Rest}",nl]); - _ -> - emit([" {X,Rest} ->",nl, - " {ok,X,Rest};",nl, - " {X,Rest,_Len} ->",nl, " {ok,X,Rest}",nl]) end, emit(["end.",nl,nl]), - case Erules of - per -> - emit(["if_binary2list(B) when is_binary(B) ->",nl, - " binary_to_list(B);",nl, - "if_binary2list(L) -> L.",nl,nl]); - _ -> - ok - end, - gen_decode_partial_incomplete(Erules), case Erules of ber -> - gen_dispatcher(Types,"encode_disp","enc_",",[]"), - gen_dispatcher(Types,"decode_disp","dec_",",mandatory"); - ber_bin -> - gen_dispatcher(Types,"encode_disp","enc_",",[]"), - gen_dispatcher(Types,"decode_disp","dec_",",mandatory"); - ber_bin_v2 -> gen_dispatcher(Types,"encode_disp","enc_",""), gen_dispatcher(Types,"decode_disp","dec_",""), gen_partial_inc_dispatcher(); @@ -1103,17 +1018,10 @@ pgen_dispatcher(Erules,_Module,{Types,_Values,_,_,_Objects,_ObjectSets}) -> gen_dispatcher(Types,"decode_disp","dec_",",mandatory") end, emit([nl]), - - case Erules of - ber -> - gen_wrapper(); - _ -> ok - end, emit({nl,nl}). -gen_decode_partial_incomplete(Erule) when Erule == ber;Erule==ber_bin; - Erule==ber_bin_v2 -> +gen_decode_partial_incomplete(ber) -> case {asn1ct:read_config_data(partial_incomplete_decode), asn1ct:get_gen_state_field(inc_type_pattern)} of {undefined,_} -> @@ -1121,34 +1029,35 @@ gen_decode_partial_incomplete(Erule) when Erule == ber;Erule==ber_bin; {_,undefined} -> ok; _ -> - case Erule of - ber_bin_v2 -> - EmitCaseClauses = - fun() -> - emit([" {'EXIT',{error,Reason}} ->",nl, - " {error,Reason};",nl, - " {'EXIT',Reason} ->",nl, - " {error,{asn1,Reason}};",nl, - " Result ->",nl, - " {ok,Result}",nl, - " end.",nl,nl]) - end, - emit(["decode_partial_incomplete(Type,Data0,", - "Pattern) ->",nl]), - emit([" {Data,_RestBin} =",nl, - " ?RT_BER:decode_primitive_", - "incomplete(Pattern,Data0),",nl, - " case catch decode_partial_inc_disp(Type,", - "Data) of",nl]), - EmitCaseClauses(), - emit(["decode_part(Type,Data0) ->",nl]), - emit([" case catch decode_inc_disp(Type,element(1," - "?RT_BER:decode(Data0",nif_parameter(),"))) of",nl]), -% " {Data,_RestBin} = ?RT_BER:decode(Data0),",nl, -% " case catch decode_inc_disp(Type,Data) of",nl]), - EmitCaseClauses(); - _ -> ok % add later - end + EmitCaseClauses = + fun() -> + emit([" {'EXIT',{error,Reason}} ->",nl, + " {error,Reason};",nl, + " {'EXIT',Reason} ->",nl, + " {error,{asn1,Reason}};",nl, + " Result ->",nl, + " {ok,Result}",nl, + " end"]) + end, + emit(["decode_partial_incomplete(Type,Data0,", + "Pattern) ->",nl]), + emit([" {Data,_RestBin} =",nl, + " ?RT_BER:decode_primitive_", + "incomplete(Pattern,Data0),",nl, + " case catch decode_partial_inc_disp(Type,", + "Data) of",nl]), + EmitCaseClauses(), + emit([".",nl,nl]), + emit(["decode_part(Type, Data0) " + "when is_binary(Data0) ->",nl]), + emit([" case catch decode_inc_disp(Type,element(1," + "?RT_BER:decode(Data0",nif_parameter(),"))) of",nl]), + EmitCaseClauses(), + emit([";",nl]), + emit(["decode_part(Type, Data0) ->",nl]), + emit([" case catch decode_inc_disp(Type, Data0) of",nl]), + EmitCaseClauses(), + emit([".",nl,nl]) end; gen_decode_partial_incomplete(_Erule) -> ok. @@ -1187,23 +1096,8 @@ gen_partial_inc_dispatcher([],_) -> " exit({error,{asn1,{undefined_type,Type}}}).",nl]). nif_parameter() -> - Options = get(encoding_options), - case {lists:member(driver,Options),lists:member(nif,Options)} of - {true,_} -> ",nif"; - {_,true} -> ",nif"; - _ -> "" - end. + ",nif". -gen_wrapper() -> - emit(["wrap_encode(Bytes) when is_list(Bytes) ->",nl, - " binary_to_list(list_to_binary(Bytes));",nl, - "wrap_encode(Bytes) when is_binary(Bytes) ->",nl, - " binary_to_list(Bytes);",nl, - "wrap_encode(Bytes) -> Bytes.",nl,nl]), - emit(["wrap_decode(Bytes) when is_list(Bytes) ->",nl, - " list_to_binary(Bytes);",nl, - "wrap_decode(Bytes) -> Bytes.",nl]). - gen_dispatcher([F1,F2|T],FuncName,Prefix,ExtraArg) -> emit([FuncName,"('",F1,"',Data) -> '",Prefix,F1,"'(Data",ExtraArg,")",";",nl]), gen_dispatcher([F2|T],FuncName,Prefix,ExtraArg); @@ -1213,19 +1107,16 @@ gen_dispatcher([Flast|_T],FuncName,Prefix,ExtraArg) -> pgen_info() -> emit(["info() ->",nl, - " case ?MODULE:module_info() of",nl, - " MI when is_list(MI) ->",nl, - " case lists:keysearch(attributes,1,MI) of",nl, - " {value,{_,Attributes}} when is_list(Attributes) ->",nl, - " case lists:keysearch(asn1_info,1,Attributes) of",nl, - " {value,{_,Info}} when is_list(Info) ->",nl, - " Info;",nl, - " _ ->",nl, - " []",nl, - " end;",nl, - " _ ->",nl, - " []",nl, - " end",nl, + " case ?MODULE:module_info(attributes) of",nl, + " Attributes when is_list(Attributes) ->",nl, + " case lists:keyfind(asn1_info, 1, Attributes) of",nl, + " {_,Info} when is_list(Info) ->",nl, + " Info;",nl, + " _ ->",nl, + " []",nl, + " end;",nl, + " _ ->",nl, + " []",nl, " end.",nl]). open_hrl(OutFile,Module) -> @@ -1496,32 +1387,15 @@ gen_head(Erules,Mod,Hrl) -> {Rtmac,Rtmod} = case Erules of per -> emit({"%% Generated by the Erlang ASN.1 PER-" - "compiler version:",asn1ct:vsn(),nl}), - {"RT_PER",?RT_PER_BIN}; - ber -> - emit({"%% Generated by the Erlang ASN.1 BER-" - "compiler version:",asn1ct:vsn(),nl}), - {"RT_BER",?RT_BER_BIN}; - per_bin -> - emit({"%% Generated by the Erlang ASN.1 BER-" - "compiler version, utilizing bit-syntax:", - asn1ct:vsn(),nl}), - %% temporary code to enable rt2ct optimization - case lists:member(optimize,Options) of - true -> {"RT_PER","asn1rt_per_bin_rt2ct"}; - _ -> {"RT_PER",?RT_PER_BIN} - end; - ber_bin -> - emit({"%% Generated by the Erlang ASN.1 BER-" "compiler version, utilizing bit-syntax:", asn1ct:vsn(),nl}), - {"RT_BER",?RT_BER_BIN}; - ber_bin_v2 -> + {"RT_PER","asn1rt_per_bin_rt2ct"}; + ber -> emit({"%% Generated by the Erlang ASN.1 BER_V2-" "compiler version, utilizing bit-syntax:", asn1ct:vsn(),nl}), {"RT_BER","asn1rt_ber_bin_v2"}; - uper_bin -> + uper -> emit(["%% Generated by the Erlang ASN.1 UNALIGNED" " PER-compiler version, utilizing" " bit-syntax:", @@ -1531,7 +1405,7 @@ gen_head(Erules,Mod,Hrl) -> emit({"%% Purpose: encoder and decoder to the types in mod ",Mod,nl,nl}), emit({"-module('",Mod,"').",nl}), put(currmod,Mod), - %emit({"-compile(export_all).",nl}), + emit({"-compile(nowarn_unused_vars).",nl}), case {Hrl,lists:member(inline,get(encoding_options))} of {0,_} -> true; {_,true} -> true; @@ -1541,7 +1415,7 @@ gen_head(Erules,Mod,Hrl) -> emit(["-define('",Rtmac,"',",Rtmod,").",nl]), emit(["-asn1_info([{vsn,'",asn1ct:vsn(),"'},",nl, " {module,'",Mod,"'},",nl, - " {options,",io_lib:format("~w",[Options]),"}]).",nl,nl]). + " {options,",io_lib:format("~p",[Options]),"}]).",nl,nl]). gen_hrlhead(Mod) -> @@ -2019,43 +1893,29 @@ constructed_suffix('SEQUENCE OF',_) -> constructed_suffix('SET OF',_) -> 'SETOF'. -erule(ber) -> - ber; -erule(ber_bin) -> - ber; -erule(ber_bin_v2) -> - ber_bin_v2; -erule(per) -> - per; -erule(per_bin) -> - per; -erule(uper_bin) -> - per. - -wrap_ber(ber) -> - ber_bin; -wrap_ber(Erule) -> - Erule. - -rt2ct_suffix() -> - Options = get(encoding_options), - case {lists:member(optimize,Options),lists:member(per_bin,Options)} of - {true,true} -> "_rt2ct"; - _ -> "" - end. -rt2ct_suffix(per_bin) -> - Options = get(encoding_options), - case lists:member(optimize,Options) of - true -> "_rt2ct"; - _ -> "" - end; -rt2ct_suffix(_) -> "". +erule(ber) -> ber; +erule(per) -> per; +erule(uper) -> per. index2suffix(0) -> ""; index2suffix(N) -> lists:concat(["_",N]). +ct_gen_module(ber) -> + asn1ct_gen_ber_bin_v2; +ct_gen_module(per) -> + asn1ct_gen_per_rt2ct; +ct_gen_module(uper) -> + asn1ct_gen_per. + +ct_constructed_module(ber) -> + asn1ct_constructed_ber_bin_v2; +ct_constructed_module(per) -> + asn1ct_constructed_per; +ct_constructed_module(uper) -> + asn1ct_constructed_per. + get_constraint(C,Key) -> case lists:keysearch(Key,1,C) of false -> diff --git a/lib/asn1/src/asn1ct_gen_ber.erl b/lib/asn1/src/asn1ct_gen_ber.erl deleted file mode 100644 index 491ebcb8fd..0000000000 --- a/lib/asn1/src/asn1ct_gen_ber.erl +++ /dev/null @@ -1,1749 +0,0 @@ -%% -%% %CopyrightBegin% -%% -%% Copyright Ericsson AB 1997-2010. All Rights Reserved. -%% -%% The contents of this file are subject to the Erlang Public License, -%% Version 1.1, (the "License"); you may not use this file except in -%% compliance with the License. You should have received a copy of the -%% Erlang Public License along with this software. If not, it can be -%% retrieved online at http://www.erlang.org/. -%% -%% Software distributed under the License is distributed on an "AS IS" -%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See -%% the License for the specific language governing rights and limitations -%% under the License. -%% -%% %CopyrightEnd% -%% -%% --module(asn1ct_gen_ber). - -%% Generate erlang module which handles (PER) encode and decode for -%% all types in an ASN.1 module - --include("asn1_records.hrl"). - --export([pgen/4]). --export([decode_class/1, decode_type/1]). --export([add_removed_bytes/0]). --export([gen_encode/2,gen_encode/3,gen_decode/2,gen_decode/3]). --export([gen_encode_prim/4]). --export([gen_dec_prim/8]). --export([gen_objectset_code/2, gen_obj_code/3]). --export([re_wrap_erule/1]). --export([unused_var/2]). --export([extaddgroup2sequence/1]). - --import(asn1ct_gen, [emit/1,demit/1]). - - % the encoding of class of tag bits 8 and 7 --define(UNIVERSAL, 0). --define(APPLICATION, 16#40). --define(CONTEXT, 16#80). --define(PRIVATE, 16#C0). - - % primitive or constructed encoding % bit 6 --define(PRIMITIVE, 0). --define(CONSTRUCTED, 2#00100000). - - --define(T_ObjectDescriptor, ?UNIVERSAL bor ?PRIMITIVE bor 7). - % restricted character string types --define(T_NumericString, ?UNIVERSAL bor ?PRIMITIVE bor 18). %can be constructed --define(T_PrintableString, ?UNIVERSAL bor ?PRIMITIVE bor 19). %can be constructed --define(T_TeletexString, ?UNIVERSAL bor ?PRIMITIVE bor 20). %can be constructed --define(T_VideotexString, ?UNIVERSAL bor ?PRIMITIVE bor 21). %can be constructed --define(T_IA5String, ?UNIVERSAL bor ?PRIMITIVE bor 22). %can be constructed --define(T_GraphicString, ?UNIVERSAL bor ?PRIMITIVE bor 25). %can be constructed --define(T_VisibleString, ?UNIVERSAL bor ?PRIMITIVE bor 26). %can be constructed --define(T_GeneralString, ?UNIVERSAL bor ?PRIMITIVE bor 27). %can be constructed - -%% pgen(Erules, Module, TypeOrVal) -%% Generate Erlang module (.erl) and (.hrl) file corresponding to an ASN.1 module -%% .hrl file is only generated if necessary -%% Erules = per | ber -%% Module = atom() -%% TypeOrVal = {TypeList,ValueList,PTypeList} -%% TypeList = ValueList = [atom()] - -pgen(OutFile,Erules,Module,TypeOrVal) -> - asn1ct_gen:pgen_module(OutFile,Erules,Module,TypeOrVal,[],true). - - -%%=============================================================================== -%%=============================================================================== -%%=============================================================================== -%% Generate ENCODING -%%=============================================================================== -%%=============================================================================== -%%=============================================================================== - -%%=============================================================================== -%% encode #{typedef, {pos, name, typespec}} -%%=============================================================================== - -gen_encode(Erules,Type) when is_record(Type,typedef) -> - gen_encode_user(Erules,Type). - -%%=============================================================================== -%% encode #{type, {tag, def, constraint}} -%%=============================================================================== - -gen_encode(Erules,Typename,Type) when is_record(Type,type) -> - InnerType = asn1ct_gen:get_inner(Type#type.def), - ObjFun = - case lists:keysearch(objfun,1,Type#type.tablecinf) of - {value,{_,_Name}} -> - ", ObjFun"; - false -> - "" - end, - case asn1ct_gen:type(InnerType) of - {constructed,bif} -> - emit([nl,nl,nl,"%%================================"]), - emit([nl,"%% ",asn1ct_gen:list2name(Typename)]), - emit([nl,"%%================================",nl]), - case lists:member(InnerType,['SET','SEQUENCE']) of - true -> - case get(asn_keyed_list) of - true -> - CompList = - case Type#type.def of - #'SEQUENCE'{components=Cl} -> Cl; - #'SET'{components=Cl} -> Cl - end, - emit([nl,"'enc_",asn1ct_gen:list2name(Typename), - "'(Val, TagIn",ObjFun, - ") when is_list(Val) ->",nl]), - emit([" 'enc_",asn1ct_gen:list2name(Typename), - "'(?RT_BER:fixoptionals(", - {asis,optionals(CompList)}, - ",Val), TagIn",ObjFun,");",nl,nl]); - _ -> true - end; - _ -> - emit([nl,"'enc_",asn1ct_gen:list2name(Typename), - "'({'",asn1ct_gen:list2name(Typename), - "',Val}, TagIn",ObjFun,") ->",nl]), - emit([" 'enc_",asn1ct_gen:list2name(Typename), - "'(Val, TagIn",ObjFun,");",nl,nl]) - end, - emit(["'enc_",asn1ct_gen:list2name(Typename), - "'(Val, TagIn",ObjFun,") ->",nl," "]), - asn1ct_gen:gen_encode_constructed(Erules,Typename,InnerType,Type); - _ -> - true - end; - -%%=============================================================================== -%% encode ComponentType -%%=============================================================================== - -gen_encode(Erules,Tname,#'ComponentType'{name=Cname,typespec=Type}) -> - NewTname = [Cname|Tname], - %% The tag is set to [] to avoid that it is - %% taken into account twice, both as a component/alternative (passed as - %% argument to the encode decode function and within the encode decode - %% function it self. - NewType = Type#type{tag=[]}, - gen_encode(Erules,NewTname,NewType). - -gen_encode_user(Erules,D) when is_record(D,typedef) -> - Typename = [D#typedef.name], - Type = D#typedef.typespec, - InnerType = asn1ct_gen:get_inner(Type#type.def), - OTag = Type#type.tag, - Tag = [X#tag{class=decode_class(X#tag.class)}|| X <- OTag], - emit([nl,nl,"%%================================"]), - emit([nl,"%% ",Typename]), - emit([nl,"%%================================",nl]), - case lists:member(InnerType,['SET','SEQUENCE']) of - true -> - case get(asn_keyed_list) of - true -> - CompList = - case Type#type.def of - #'SEQUENCE'{components=Cl} -> Cl; - #'SET'{components=Cl} -> Cl - end, - - emit([nl,"'enc_",asn1ct_gen:list2name(Typename), - "'(Val, TagIn) when is_list(Val) ->",nl]), - emit([" 'enc_",asn1ct_gen:list2name(Typename), - "'(?RT_BER:fixoptionals(", - {asis,optionals(CompList)}, - ",Val), TagIn);",nl,nl]); - _ -> true - end; - _ -> - emit({nl,"'enc_",asn1ct_gen:list2name(Typename), - "'({'",asn1ct_gen:list2name(Typename),"',Val}, TagIn) ->",nl}), - emit({" 'enc_",asn1ct_gen:list2name(Typename),"'(Val, TagIn);",nl,nl}) - end, - emit({"'enc_",asn1ct_gen:list2name(Typename),"'(", - unused_var("Val",Type#type.def),", TagIn) ->",nl}), - CurrentMod = get(currmod), - case asn1ct_gen:type(InnerType) of - {constructed,bif} -> - asn1ct_gen:gen_encode_constructed(Erules,Typename,InnerType,D); - {primitive,bif} -> - asn1ct_gen_ber:gen_encode_prim(ber,Type,["TagIn ++ ", - {asis,Tag}],"Val"), - emit([".",nl]); - #typereference{val=Ename} -> - emit([" 'enc_",Ename,"'(Val, TagIn ++ ",{asis,Tag},").",nl]); - #'Externaltypereference'{module=CurrentMod,type=Etype} -> - emit([" 'enc_",Etype,"'(Val, TagIn ++ ", - {asis,Tag},").",nl]); - #'Externaltypereference'{module=Emod,type=Etype} -> - emit([" '",Emod,"':'enc_",Etype,"'(Val, TagIn ++ ", - {asis,Tag},").",nl]); - 'ASN1_OPEN_TYPE' -> - emit(["%% OPEN TYPE",nl]), - asn1ct_gen_ber:gen_encode_prim(ber, - Type#type{def='ASN1_OPEN_TYPE'}, - ["TagIn ++ ", - {asis,Tag}],"Val"), - emit([".",nl]) - end. - -unused_var(Var,#'SEQUENCE'{components=Cl}) -> - unused_var1(Var,Cl); -unused_var(Var,#'SET'{components=Cl}) -> - unused_var1(Var,Cl); -unused_var(Var,_) -> - Var. -unused_var1(Var,Cs) when Cs == []; Cs == {[],[]} -> - lists:concat(["_",Var]); -unused_var1(Var,_) -> - Var. - -unused_optormand_var(Var,Def) -> - case asn1ct_gen:type(asn1ct_gen:get_inner(Def)) of - 'ASN1_OPEN_TYPE' -> - lists:concat(["_",Var]); - _ -> - Var - end. - - -gen_encode_prim(Erules,D,DoTag,Value) when is_record(D,type) -> - -%%% Currently not used for BER (except for BitString) and therefore replaced -%%% with [] as a placeholder - BitStringConstraint = D#type.constraint, - Constraint = [], - asn1ct_name:new(enumval), - case D#type.def of - 'BOOLEAN' -> - emit_encode_func('boolean',Value,DoTag); - 'INTEGER' -> - emit_encode_func('integer',Constraint,Value,DoTag); - {'INTEGER',NamedNumberList} -> - emit_encode_func('integer',Constraint,Value, - NamedNumberList,DoTag); - {'ENUMERATED',NamedNumberList={_,_}} -> - - emit(["case (case ",Value," of {_,",{curr,enumval},"}->", - {curr,enumval},";_->", Value," end) of",nl]), - asn1ct_name:new(enumval), - emit_enc_enumerated_cases(NamedNumberList,DoTag); - {'ENUMERATED',NamedNumberList} -> - - emit(["case (case ",Value," of {_,",{curr,enumval},"}->", - {curr,enumval},";_->", Value," end) of",nl]), - asn1ct_name:new(enumval), - emit_enc_enumerated_cases(NamedNumberList,DoTag); - - 'REAL' -> - emit_encode_func('real',Constraint,Value,DoTag); - - {'BIT STRING',NamedNumberList} -> - emit_encode_func('bit_string',BitStringConstraint,Value, - NamedNumberList,DoTag); - 'ANY' -> - emit_encode_func('open_type', Value,DoTag); - 'NULL' -> - emit_encode_func('null',Value,DoTag); - 'OBJECT IDENTIFIER' -> - emit_encode_func("object_identifier",Value,DoTag); - 'RELATIVE-OID' -> - emit_encode_func("relative_oid",Value,DoTag); - 'ObjectDescriptor' -> - emit_encode_func('restricted_string',Constraint,Value, - ?T_ObjectDescriptor,DoTag); - 'OCTET STRING' -> - emit_encode_func('octet_string',Constraint,Value,DoTag); - 'NumericString' -> - emit_encode_func('restricted_string',Constraint,Value, - ?T_NumericString,DoTag); - TString when TString == 'TeletexString'; - TString == 'T61String' -> - emit_encode_func('restricted_string',Constraint,Value, - ?T_TeletexString,DoTag); - 'VideotexString' -> - emit_encode_func('restricted_string',Constraint,Value, - ?T_VideotexString,DoTag); - 'GraphicString' -> - emit_encode_func('restricted_string',Constraint,Value, - ?T_GraphicString,DoTag); - 'VisibleString' -> - emit_encode_func('restricted_string',Constraint,Value, - ?T_VisibleString,DoTag); - 'GeneralString' -> - emit_encode_func('restricted_string',Constraint,Value, - ?T_GeneralString,DoTag); - 'PrintableString' -> - emit_encode_func('restricted_string',Constraint,Value, - ?T_PrintableString,DoTag); - 'IA5String' -> - emit_encode_func('restricted_string',Constraint,Value, - ?T_IA5String,DoTag); - 'UniversalString' -> - emit_encode_func('universal_string',Constraint,Value,DoTag); - 'UTF8String' -> - emit_encode_func('UTF8_string',Constraint,Value,DoTag); - 'BMPString' -> - emit_encode_func('BMP_string',Constraint,Value,DoTag); - 'UTCTime' -> - emit_encode_func('utc_time',Constraint,Value,DoTag); - 'GeneralizedTime' -> - emit_encode_func('generalized_time',Constraint,Value,DoTag); - 'ASN1_OPEN_TYPE' -> - emit_encode_func('open_type', Value,DoTag); - #'ObjectClassFieldType'{} -> - case asn1ct_gen:get_inner(D#type.def) of - {fixedtypevaluefield,_,InnerType} -> - gen_encode_prim(Erules,InnerType,DoTag,Value); - 'ASN1_OPEN_TYPE' -> - emit_encode_func('open_type', Value,DoTag); - XX -> - exit({'can not encode' ,XX}) - end; - XX -> - exit({'can not encode' ,XX}) - end. - - -emit_encode_func(Name,Value,Tags) when is_atom(Name) -> - emit_encode_func(atom_to_list(Name),Value,Tags); -emit_encode_func(Name,Value,Tags) -> - Fname = "?RT_BER:encode_" ++ Name, - emit([Fname,"(",Value,", ",Tags,")"]). - -emit_encode_func(Name,Constraint,Value,Tags) when is_atom(Name) -> - emit_encode_func(atom_to_list(Name),Constraint,Value,Tags); -emit_encode_func(Name,Constraint,Value,Tags) -> - Fname = "?RT_BER:encode_" ++ Name, - emit([Fname,"(",{asis,Constraint},", ",Value,", ",Tags,")"]). - -emit_encode_func(Name,Constraint,Value,Asis,Tags) when is_atom(Name) -> - emit_encode_func(atom_to_list(Name),Constraint,Value,Asis,Tags); -emit_encode_func(Name,Constraint,Value,Asis,Tags) -> - Fname = "?RT_BER:encode_" ++ Name, - emit([Fname,"(",{asis,Constraint},", ",Value, - ", ",{asis,Asis}, - ", ",Tags,")"]). - -emit_enc_enumerated_cases({L1,L2}, Tags) -> - emit_enc_enumerated_cases(L1++L2, Tags, ext); -emit_enc_enumerated_cases(L, Tags) -> - emit_enc_enumerated_cases(L, Tags, noext). - -emit_enc_enumerated_cases([{EnumName,EnumVal},H2|T], Tags, Ext) -> - emit([{asis,EnumName}," -> ?RT_BER:encode_enumerated(",EnumVal,",",Tags,");",nl]), -%% emit(["'",{asis,EnumName},"' -> ?RT_BER:encode_enumerated(",EnumVal,",",Tags,");",nl]), - emit_enc_enumerated_cases([H2|T], Tags, Ext); -emit_enc_enumerated_cases([{EnumName,EnumVal}], Tags, Ext) -> - emit([{asis,EnumName}," -> ?RT_BER:encode_enumerated(",EnumVal,",",Tags,")"]), -%% emit(["'",{asis,EnumName},"' -> ?RT_BER:encode_enumerated(",EnumVal,",",Tags,")"]), - case Ext of - noext -> emit([";",nl]); - ext -> -%% emit([";",nl,"{asn1_enum,",{curr,enumval},"} -> ", -%% "?RT_BER:encode_enumerated(",{curr,enumval},",",Tags,");",nl]), -%% asn1ct_name:new(enumval) - emit([";",nl]) - end, - emit([{curr,enumval}," -> exit({error,{asn1, {enumerated_not_in_range,",{curr, enumval},"}}})"]), - emit([nl,"end"]). - - -%%=============================================================================== -%%=============================================================================== -%%=============================================================================== -%% Generate DECODING -%%=============================================================================== -%%=============================================================================== -%%=============================================================================== - -%%=============================================================================== -%% decode #{typedef, {pos, name, typespec}} -%%=============================================================================== - -gen_decode(Erules,Type) when is_record(Type,typedef) -> - D = Type, - emit({nl,nl}), - emit({"'dec_",Type#typedef.name,"'(Bytes, OptOrMand) ->",nl}), - emit({" 'dec_",Type#typedef.name,"'(Bytes, OptOrMand, []).",nl,nl}), - emit({"'dec_",Type#typedef.name,"'(Bytes, ", - unused_optormand_var("OptOrMand",(Type#typedef.typespec)#type.def),", TagIn) ->",nl}), - dbdec(Type#typedef.name), - gen_decode_user(Erules,D). - - -%%=============================================================================== -%% decode #{type, {tag, def, constraint}} -%%=============================================================================== - -gen_decode(Erules,Tname,Type) when is_record(Type,type) -> - Typename = Tname, - InnerType = asn1ct_gen:get_inner(Type#type.def), - case asn1ct_gen:type(InnerType) of - {constructed,bif} -> - ObjFun = - case Type#type.tablecinf of - [{objfun,_}|_R] -> - ", ObjFun"; - _ -> - "" - end, - emit({"'dec_",asn1ct_gen:list2name(Typename),"'(Bytes, OptOrMand, TagIn",ObjFun,") ->",nl}), - dbdec(Typename), - asn1ct_gen:gen_decode_constructed(Erules,Typename,InnerType,Type); - _ -> - true - end; - - -%%=============================================================================== -%% decode ComponentType -%%=============================================================================== - -gen_decode(Erules,Tname,#'ComponentType'{name=Cname,typespec=Type}) -> - NewTname = [Cname|Tname], - %% The tag is set to [] to avoid that it is - %% taken into account twice, both as a component/alternative (passed as - %% argument to the encode decode function and within the encode decode - %% function it self. - NewType = Type#type{tag=[]}, - gen_decode(Erules,NewTname,NewType). - - -gen_decode_user(Erules,D) when is_record(D,typedef) -> - Typename = [D#typedef.name], - Def = D#typedef.typespec, - InnerType = asn1ct_gen:get_inner(Def#type.def), - InnerTag = Def#type.tag , - Tag = [X#tag{class=decode_class(X#tag.class)}|| X <- InnerTag], - case asn1ct_gen:type(InnerType) of - 'ASN1_OPEN_TYPE' -> - BytesVar = asn1ct_gen:mk_var(asn1ct_name:curr(bytes)), - asn1ct_name:new(len), - gen_dec_prim(Erules, Def#type{def='ASN1_OPEN_TYPE'}, - BytesVar, Tag, "TagIn",no_length, - ?PRIMITIVE,"OptOrMand"), - emit({".",nl,nl}); - {primitive,bif} -> - BytesVar = asn1ct_gen:mk_var(asn1ct_name:curr(bytes)), - asn1ct_name:new(len), - gen_dec_prim(Erules, Def, BytesVar, Tag, "TagIn",no_length, - ?PRIMITIVE,"OptOrMand"), - emit({".",nl,nl}); - {constructed,bif} -> - asn1ct_gen:gen_decode_constructed(Erules,Typename,InnerType,D); - TheType -> - DecFunName = mkfuncname(TheType,dec), - emit({DecFunName,"(",{curr,bytes}, - ", OptOrMand, TagIn++",{asis,Tag},")"}), - emit({".",nl,nl}) - end. - - -gen_dec_prim(Erules,Att,BytesVar,DoTag,TagIn,Length,Form,OptOrMand) -> - Typename = Att#type.def, -%% Currently not used for BER replaced with [] as place holder -%% Constraint = Att#type.constraint, -%% Constraint = [], - Constraint = - case get_constraint(Att#type.constraint,'SizeConstraint') of - no -> []; - Tc -> Tc - end, - ValueRange = - case get_constraint(Att#type.constraint,'ValueRange') of - no -> []; - Tv -> Tv - end, - SingleValue = - case get_constraint(Att#type.constraint,'SingleValue') of - no -> []; - Sv -> Sv - end, - AsBin = case get(binary_strings) of - true -> "_as_bin"; - _ -> "" - end, - NewTypeName = case Typename of - 'ANY' -> 'ASN1_OPEN_TYPE'; - _ -> Typename - end, - DoLength = - case NewTypeName of - 'BOOLEAN'-> - emit({"?RT_BER:decode_boolean(",BytesVar,","}), - false; - 'INTEGER' -> - emit({"?RT_BER:decode_integer(",BytesVar,",", - {asis,int_constr(SingleValue,ValueRange)},","}), - false; - {'INTEGER',NamedNumberList} -> - emit({"?RT_BER:decode_integer(",BytesVar,",", - {asis,int_constr(SingleValue,ValueRange)},",", - {asis,NamedNumberList},","}), - false; - {'ENUMERATED',NamedNumberList} -> - emit({"?RT_BER:decode_enumerated(",BytesVar,",", - {asis,Constraint},",", - {asis,NamedNumberList},","}), - false; - 'REAL' -> - emit({"?RT_BER:decode_real(",BytesVar,",", - {asis,Constraint},","}), - false; - {'BIT STRING',NamedNumberList} -> - case get(compact_bit_string) of - true -> - emit({"?RT_BER:decode_compact_bit_string(", - BytesVar,",",{asis,Constraint},",", - {asis,NamedNumberList},","}); - _ -> - emit({"?RT_BER:decode_bit_string(",BytesVar,",", - {asis,Constraint},",", - {asis,NamedNumberList},","}) - end, - true; - 'NULL' -> - emit({"?RT_BER:decode_null(",BytesVar,","}), - false; - 'OBJECT IDENTIFIER' -> - emit({"?RT_BER:decode_object_identifier(",BytesVar,","}), - false; - 'RELATIVE-OID' -> - emit({"?RT_BER:decode_relative_oid(",BytesVar,","}), - false; - 'ObjectDescriptor' -> - emit({"?RT_BER:decode_restricted_string(", - BytesVar,",",{asis,Constraint},",",{asis,?T_ObjectDescriptor},","}), - true; - 'OCTET STRING' -> - emit({"?RT_BER:decode_octet_string",AsBin,"(",BytesVar,",",{asis,Constraint},","}), - true; - 'NumericString' -> - emit({"?RT_BER:decode_restricted_string",AsBin,"(", - BytesVar,",",{asis,Constraint},",",{asis,?T_NumericString},","}),true; - TString when TString == 'TeletexString'; - TString == 'T61String' -> - emit({"?RT_BER:decode_restricted_string",AsBin,"(", - BytesVar,",",{asis,Constraint},",",{asis,?T_TeletexString},","}), - true; - 'VideotexString' -> - emit({"?RT_BER:decode_restricted_string",AsBin,"(", - BytesVar,",",{asis,Constraint},",",{asis,?T_VideotexString},","}), - true; - 'GraphicString' -> - emit({"?RT_BER:decode_restricted_string",AsBin,"(", - BytesVar,",",{asis,Constraint},",",{asis,?T_GraphicString},","}) - ,true; - 'VisibleString' -> - emit({"?RT_BER:decode_restricted_string",AsBin,"(", - BytesVar,",",{asis,Constraint},",",{asis,?T_VisibleString},","}), - true; - 'GeneralString' -> - emit({"?RT_BER:decode_restricted_string",AsBin,"(", - BytesVar,",",{asis,Constraint},",",{asis,?T_GeneralString},","}), - true; - 'PrintableString' -> - emit({"?RT_BER:decode_restricted_string",AsBin,"(", - BytesVar,",",{asis,Constraint},",",{asis,?T_PrintableString},","}), - true; - 'IA5String' -> - emit({"?RT_BER:decode_restricted_string",AsBin,"(", - BytesVar,",",{asis,Constraint},",",{asis,?T_IA5String},","}), - true; - 'UniversalString' -> - emit({"?RT_BER:decode_universal_string",AsBin,"(", - BytesVar,",",{asis,Constraint},","}), - true; - 'UTF8String' -> - emit({"?RT_BER:decode_UTF8_string",AsBin,"(", - BytesVar,","}), - false; - 'BMPString' -> - emit({"?RT_BER:decode_BMP_string",AsBin,"(", - BytesVar,",",{asis,Constraint},","}), - true; - 'UTCTime' -> - emit({"?RT_BER:decode_utc_time",AsBin,"(", - BytesVar,",",{asis,Constraint},","}), - true; - 'GeneralizedTime' -> - emit({"?RT_BER:decode_generalized_time",AsBin,"(", - BytesVar,",",{asis,Constraint},","}), - true; - 'ASN1_OPEN_TYPE' -> - emit(["?RT_BER:decode_open_type(",re_wrap_erule(Erules),",", - BytesVar,","]), - false; - #'ObjectClassFieldType'{} -> - case asn1ct_gen:get_inner(Att#type.def) of - {fixedtypevaluefield,_,InnerType} -> - gen_dec_prim(Erules,InnerType,BytesVar,DoTag,TagIn,Length,Form,OptOrMand), - false; - 'ASN1_OPEN_TYPE' -> - emit(["?RT_BER:decode_open_type(", - re_wrap_erule(Erules),",", - BytesVar,","]), - false; - XX -> - exit({'can not decode' ,XX}) - end; - Other -> - exit({'can not decode' ,Other}) - end, - - NewLength = case DoLength of - true -> [", ", Length]; - false -> "" - end, - NewOptOrMand = case OptOrMand of - _ when is_list(OptOrMand) -> OptOrMand; - mandatory -> {asis,mandatory}; - _ -> {asis,opt_or_default} - end, - case {TagIn,NewTypeName} of - {_,#'ObjectClassFieldType'{}} -> - case asn1ct_gen:get_inner(Att#type.def) of - 'ASN1_OPEN_TYPE' -> - emit([{asis,DoTag},")"]); - _ -> ok - end; - {[],'ASN1_OPEN_TYPE'} -> - emit([{asis,DoTag},")"]); - {_,'ASN1_OPEN_TYPE'} -> - emit([TagIn,"++",{asis,DoTag},")"]); - {[],_} -> - emit([{asis,DoTag},NewLength,", ",NewOptOrMand,")"]); - _ when is_list(TagIn) -> - emit([TagIn,"++",{asis,DoTag},NewLength,", ",NewOptOrMand,")"]) - end. - - -int_constr([],[]) -> - []; -int_constr([],ValueRange) -> - ValueRange; -int_constr(SingleValue,[]) -> - SingleValue; -int_constr(SV,VR) -> - [SV,VR]. - -%% Object code generating for encoding and decoding -%% ------------------------------------------------ - -gen_obj_code(Erules,_Module,Obj) when is_record(Obj,typedef) -> - ObjName = Obj#typedef.name, - Def = Obj#typedef.typespec, - #'Externaltypereference'{module=M,type=ClName} = Def#'Object'.classname, - Class = asn1_db:dbget(M,ClName), - - {object,_,Fields} = Def#'Object'.def, - emit({nl,nl,nl,"%%================================"}), - emit({nl,"%% ",ObjName}), - emit({nl,"%%================================",nl}), - EncConstructed = - gen_encode_objectfields(ClName,get_class_fields(Class), - ObjName,Fields,[]), - emit(nl), - gen_encode_constr_type(Erules,EncConstructed), - emit(nl), - DecConstructed = - gen_decode_objectfields(ClName,get_class_fields(Class), - ObjName,Fields,[]), - emit(nl), - gen_decode_constr_type(Erules,DecConstructed); -gen_obj_code(_Erules,_Module,Obj) when is_record(Obj,pobjectdef) -> - ok. - - -gen_encode_objectfields(ClassName,[{typefield,Name,OptOrMand}|Rest], - ObjName,ObjectFields,ConstrAcc) -> - EmitFuncClause = - fun(Args) -> - emit(["'enc_",ObjName,"'(",{asis,Name}, - ", ",Args,", _RestPrimFieldName) ->",nl]) - end, -% emit(["'enc_",ObjName,"'(",{asis,Name}, -% ", Val, TagIn, _RestPrimFieldName) ->",nl]), - MaybeConstr= - case {get_object_field(Name,ObjectFields),OptOrMand} of - {false,'MANDATORY'} -> %% this case is illegal - exit({error,{asn1,{"missing mandatory field in object", - ObjName}}}); - {false,'OPTIONAL'} -> %% OPTIONAL field in class - EmitFuncClause("Val, _"), %% Value must be anything - %% already encoded - emit([" {Val,0}"]), - []; - {false,{'DEFAULT',DefaultType}} -> - EmitFuncClause("Val, TagIn"), - gen_encode_default_call(ClassName,Name,DefaultType); - {{Name,TypeSpec},_} -> - %% A specified field owerwrites any 'DEFAULT' or - %% 'OPTIONAL' field in the class - EmitFuncClause("Val, TagIn"), - gen_encode_field_call(ObjName,Name,TypeSpec) - end, - case more_genfields(Rest) of - true -> - emit([";",nl]); - false -> - emit([".",nl]) - end, - gen_encode_objectfields(ClassName,Rest,ObjName,ObjectFields, - MaybeConstr++ConstrAcc); -gen_encode_objectfields(ClassName,[{objectfield,Name,_,_,OptOrMand}|Rest], - ObjName,ObjectFields,ConstrAcc) -> - CurrentMod = get(currmod), - EmitFuncClause = - fun(Args) -> - emit(["'enc_",ObjName,"'(",{asis,Name}, - ", ",Args,") ->",nl]) - end, -% emit(["'enc_",ObjName,"'(",{asis,Name}, -% ", Val, TagIn, [H|T]) ->",nl]), - case {get_object_field(Name,ObjectFields),OptOrMand} of - {false,'MANDATORY'} -> - exit({error,{asn1,{"missing mandatory field in object", - ObjName}}}); - {false,'OPTIONAL'} -> - EmitFuncClause("_,_,_"), - emit([" exit({error,{'use of missing field in object', ",{asis,Name}, - "}})"]); - {false,{'DEFAULT',_DefaultObject}} -> - exit({error,{asn1,{"not implemented yet",Name}}}); - {{Name,#'Externalvaluereference'{module=CurrentMod, - value=TypeName}},_} -> - EmitFuncClause(" Val, TagIn, [H|T]"), - emit({indent(3),"'enc_",TypeName,"'(H, Val, TagIn, T)"}); - {{Name,#'Externalvaluereference'{module=M,value=TypeName}},_} -> - EmitFuncClause(" Val, TagIn, [H|T]"), - emit({indent(3),"'",M,"':'enc_",TypeName,"'(H, Val, TagIn, T)"}); - {{Name,TypeSpec},_} -> - EmitFuncClause(" Val, TagIn, [H|T]"), - case TypeSpec#typedef.name of - {ExtMod,TypeName} -> - emit({indent(3),"'",ExtMod,"':'enc_",TypeName, - "'(H, Val, TagIn, T)"}); - TypeName -> - emit({indent(3),"'enc_",TypeName,"'(H, Val, TagIn, T)"}) - end - end, - case more_genfields(Rest) of - true -> - emit([";",nl]); - false -> - emit([".",nl]) - end, - gen_encode_objectfields(ClassName,Rest,ObjName,ObjectFields,ConstrAcc); -gen_encode_objectfields(ClassName,[_|Cs],O,OF,Acc) -> - gen_encode_objectfields(ClassName,Cs,O,OF,Acc); -gen_encode_objectfields(_,[],_,_,Acc) -> - Acc. - - -% gen_encode_objectfields(Class,ObjName,[{FieldName,Type}|Rest],ConstrAcc) -> -% Fields = Class#objectclass.fields, -% MaybeConstr= -% case is_typefield(Fields,FieldName) of -% true -> -% Def = Type#typedef.typespec, -% OTag = Def#type.tag, -% Tag = [X#tag{class=decode_class(X#tag.class)}|| X <- OTag], -% emit({"'enc_",ObjName,"'(",{asis,FieldName}, -% ", Val, TagIn, RestPrimFieldName) ->",nl}), -% CAcc= -% case Type#typedef.name of -% {primitive,bif} -> -% gen_encode_prim(ber,Def,["TagIn ++ ",{asis,Tag}], -% "Val"), -% []; -% {constructed,bif} -> -% %%InnerType = asn1ct_gen:get_inner(Def#type.def), -% %%asn1ct_gen:gen_encode_constructed(ber,[ObjName], -% %% InnerType,Def); -% emit({" 'enc_",ObjName,'_',FieldName, -% "'(Val, TagIn ++ ",{asis,Tag},")"}), -% [{['enc_',ObjName,'_',FieldName],Def}]; -% {ExtMod,TypeName} -> -% emit({" '",ExtMod,"':'enc_",TypeName, -% "'(Val, TagIn ++ ",{asis,Tag},")"}), -% []; -% TypeName -> -% emit({" 'enc_",TypeName,"'(Val, TagIn ++ ", -% {asis,Tag},")"}), -% [] -% end, -% case more_genfields(Fields,Rest) of -% true -> -% emit({";",nl}); -% false -> -% emit({".",nl}) -% end, -% CAcc; -% {false,objectfield} -> -% emit({"'enc_",ObjName,"'(",{asis,FieldName}, -% ", Val, TagIn, [H|T]) ->",nl}), -% case Type#typedef.name of -% {ExtMod,TypeName} -> -% emit({indent(3),"'",ExtMod,"':'enc_",TypeName, -% "'(H, Val, TagIn, T)"}); -% TypeName -> -% emit({indent(3),"'enc_",TypeName,"'(H, Val, TagIn, T)"}) -% end, -% case more_genfields(Fields,Rest) of -% true -> -% emit({";",nl}); -% false -> -% emit({".",nl}) -% end, -% []; -% {false,_} -> [] -% end, -% gen_encode_objectfields(Class,ObjName,Rest,MaybeConstr ++ ConstrAcc); -% gen_encode_objectfields(C,O,[H|T],Acc) -> -% gen_encode_objectfields(C,O,T,Acc); -% gen_encode_objectfields(_,_,[],Acc) -> -% Acc. - -% gen_encode_constr_type([{Name,Def}|Rest]) -> -% emit({Name,"(Val,TagIn) ->",nl}), -% InnerType = asn1ct_gen:get_inner(Def#type.def), -% asn1ct_gen:gen_encode_constructed(ber,Name,InnerType,Def), -% gen_encode_constr_type(Rest); -gen_encode_constr_type(Erules,[TypeDef|Rest]) when is_record(TypeDef,typedef) -> - case is_already_generated(enc,TypeDef#typedef.name) of - true -> ok; - _ -> gen_encode_user(Erules,TypeDef) - end, - gen_encode_constr_type(Erules,Rest); -gen_encode_constr_type(_,[]) -> - ok. - -gen_encode_field_call(_ObjName,_FieldName, - #'Externaltypereference'{module=M,type=T}) -> - CurrentMod = get(currmod), - TDef = asn1_db:dbget(M,T), - Def = TDef#typedef.typespec, - OTag = Def#type.tag, - Tag = [X#tag{class=decode_class(X#tag.class)}|| X <- OTag], - if - M == CurrentMod -> - emit({" 'enc_",T,"'(Val, TagIn ++ ",{asis,Tag},")"}), - []; - true -> - emit({" '",M,"':'enc_",T,"'(Val, TagIn ++ ",{asis,Tag},")"}), - [] - end; -gen_encode_field_call(ObjName,FieldName,Type) -> - Def = Type#typedef.typespec, - OTag = Def#type.tag, - Tag = [X#tag{class=decode_class(X#tag.class)}|| X <- OTag], - case Type#typedef.name of - {primitive,bif} -> %%tag should be the primitive tag - gen_encode_prim(ber,Def,["TagIn ++ ",{asis,Tag}], - "Val"), - []; - {constructed,bif} -> - emit({" 'enc_",ObjName,'_',FieldName, - "'(Val, TagIn ++",{asis,Tag},")"}), - [Type#typedef{name=list_to_atom(lists:concat([ObjName,'_',FieldName]))}]; - {ExtMod,TypeName} -> - emit({" '",ExtMod,"':'enc_",TypeName, - "'(Val, TagIn ++ ",{asis,Tag},")"}), - []; - TypeName -> - emit({" 'enc_",TypeName,"'(Val, TagIn ++ ",{asis,Tag},")"}), - [] - end. - -gen_encode_default_call(ClassName,FieldName,Type) -> - CurrentMod = get(currmod), - InnerType = asn1ct_gen:get_inner(Type#type.def), - OTag = Type#type.tag, - Tag = [X#tag{class=decode_class(X#tag.class)}|| X <- OTag], - case asn1ct_gen:type(InnerType) of - {constructed,bif} -> -%% asn1ct_gen:gen_encode_constructed(Erules,Typename,InnerType,Type); - emit([" 'enc_",ClassName,'_',FieldName,"'(Bytes, TagIn ++ ", - {asis,Tag},")"]), - [#typedef{name=list_to_atom(lists:concat([ClassName,'_',FieldName])), - typespec=Type}]; - {primitive,bif} -> - gen_encode_prim(ber,Type,["TagIn ++ ",{asis,Tag}],"Val"), - []; - #'Externaltypereference'{module=CurrentMod,type=Etype} -> - emit([" 'enc_",Etype,"'(Val, TagIn ++ ",{asis,Tag},")",nl]), - []; - #'Externaltypereference'{module=Emod,type=Etype} -> - emit([" '",Emod,"':'enc_",Etype,"'(Val, TagIn ++ ",{asis,Tag},")",nl]), - [] - end. - - - -gen_decode_objectfields(ClassName,[{typefield,Name,OptOrMand}|Rest], - ObjName,ObjectFields,ConstrAcc) -> - EmitFuncClause = - fun(Args) -> - emit(["'dec_",ObjName,"'(",{asis,Name}, - ", ",Args,"_) ->",nl]) - end, -% emit(["'dec_",ObjName,"'(",{asis,Name}, -% ", Bytes, TagIn, RestPrimFieldName) ->",nl]), - MaybeConstr= - case {get_object_field(Name,ObjectFields),OptOrMand} of - {false,'MANDATORY'} -> %% this case is illegal - exit({error,{asn1,{"missing mandatory field in object", - ObjName}}}); - {false,'OPTIONAL'} -> - EmitFuncClause("Bytes, _,"), -% emit([" asn1_NOVALUE"]), - emit([" {Bytes,[],0}"]), - []; - {false,{'DEFAULT',DefaultType}} -> - EmitFuncClause("Bytes, TagIn,"), - gen_decode_default_call(ClassName,Name,"Bytes",DefaultType); - {{Name,TypeSpec},_} -> - %% A specified field owerwrites any 'DEFAULT' or - %% 'OPTIONAL' field in the class - EmitFuncClause("Bytes, TagIn,"), - gen_decode_field_call(ObjName,Name,"Bytes",TypeSpec) - end, - case more_genfields(Rest) of - true -> - emit([";",nl]); - false -> - emit([".",nl]) - end, - gen_decode_objectfields(ClassName,Rest,ObjName,ObjectFields,MaybeConstr++ConstrAcc); -gen_decode_objectfields(ClassName,[{objectfield,Name,_,_,OptOrMand}|Rest], - ObjName,ObjectFields,ConstrAcc) -> - CurrentMod = get(currmod), - EmitFuncClause = - fun(Args) -> - emit(["'dec_",ObjName,"'(",{asis,Name}, - ", ",Args,") ->",nl]) - end, -% emit(["'dec_",ObjName,"'(",{asis,Name}, -% ", Bytes,TagIn,[H|T]) ->",nl]), - case {get_object_field(Name,ObjectFields),OptOrMand} of - {false,'MANDATORY'} -> - exit({error,{asn1,{"missing mandatory field in object", - ObjName}}}); - {false,'OPTIONAL'} -> - EmitFuncClause("_,_,_"), - emit([" exit({error,{'illegal use of missing field in object', ",{asis,Name}, - "}})"]); - {false,{'DEFAULT',_DefaultObject}} -> - exit({error,{asn1,{"not implemented yet",Name}}}); - {{Name,#'Externalvaluereference'{module=CurrentMod, - value=TypeName}},_} -> - EmitFuncClause("Bytes,TagIn,[H|T]"), - emit({indent(3),"'dec_",TypeName,"'(H, Bytes, TagIn, T)"}); - {{Name,#'Externalvaluereference'{module=M,value=TypeName}},_} -> - EmitFuncClause("Bytes,TagIn,[H|T]"), - emit({indent(3),"'",M,"':'dec_",TypeName, - "'(H, Bytes, TagIn, T)"}); - {{Name,TypeSpec},_} -> - EmitFuncClause("Bytes,TagIn,[H|T]"), - case TypeSpec#typedef.name of - {ExtMod,TypeName} -> - emit({indent(3),"'",ExtMod,"':'dec_",TypeName, - "'(H, Bytes, TagIn, T)"}); - TypeName -> - emit({indent(3),"'dec_",TypeName,"'(H, Bytes, TagIn, T)"}) - end - end, - case more_genfields(Rest) of - true -> - emit([";",nl]); - false -> - emit([".",nl]) - end, - gen_decode_objectfields(ClassName,Rest,ObjName,ObjectFields,ConstrAcc); -gen_decode_objectfields(CN,[_|Cs],O,OF,CAcc) -> - gen_decode_objectfields(CN,Cs,O,OF,CAcc); -gen_decode_objectfields(_,[],_,_,CAcc) -> - CAcc. - - -gen_decode_constr_type(Erules,[TypeDef|Rest]) when is_record(TypeDef,typedef) -> - case is_already_generated(dec,TypeDef#typedef.name) of - true -> ok; - _ -> - gen_decode(Erules,TypeDef) - end, - gen_decode_constr_type(Erules,Rest); -gen_decode_constr_type(_,[]) -> - ok. - -gen_decode_field_call(_ObjName,_FieldName,Bytes, - #'Externaltypereference'{module=M,type=T}) -> - CurrentMod = get(currmod), - TDef = asn1_db:dbget(M,T), - Def = TDef#typedef.typespec, - OTag = Def#type.tag, - Tag = [X#tag{class=decode_class(X#tag.class)}|| X <- OTag], - if - M == CurrentMod -> - emit({" 'dec_",T,"'(",Bytes, - ", opt_or_default,TagIn ++ ",{asis,Tag},")"}), - []; - true -> - emit({" '",M,"':'dec_",T, - "'(",Bytes,", opt_or_default,TagIn ++ ",{asis,Tag},")"}), - [] - end; -gen_decode_field_call(ObjName,FieldName,Bytes,Type) -> - Def = Type#typedef.typespec, - OTag = Def#type.tag, - Tag = [X#tag{class=decode_class(X#tag.class)}|| X <- OTag], - case Type#typedef.name of - {primitive,bif} -> %%tag should be the primitive tag - gen_dec_prim(ber,Def,Bytes,Tag,"TagIn",no_length, - ?PRIMITIVE,opt_or_default), - []; - {constructed,bif} -> - emit({" 'dec_",ObjName,'_',FieldName, - "'(",Bytes,",opt_or_default, TagIn ++ ",{asis,Tag},")"}), - [Type#typedef{name=list_to_atom(lists:concat([ObjName,'_',FieldName]))}]; - {ExtMod,TypeName} -> - emit({" '",ExtMod,"':'dec_",TypeName, - "'(",Bytes,", opt_or_default,TagIn ++ ",{asis,Tag},")"}), - []; - TypeName -> - emit({" 'dec_",TypeName,"'(",Bytes, - ", opt_or_default,TagIn ++ ",{asis,Tag},")"}), - [] - end. - -gen_decode_default_call(ClassName,FieldName,Bytes,Type) -> - CurrentMod = get(currmod), - InnerType = asn1ct_gen:get_inner(Type#type.def), - OTag = Type#type.tag, - Tag = [X#tag{class=decode_class(X#tag.class)}|| X <- OTag], - case asn1ct_gen:type(InnerType) of - {constructed,bif} -> - emit([" 'dec_",ClassName,'_',FieldName,"'(",Bytes, - ",opt_or_default, TagIn ++ ",{asis,Tag},")"]), - [#typedef{name=list_to_atom(lists:concat([ClassName,'_',FieldName])), - typespec=Type}]; - {primitive,bif} -> - gen_dec_prim(ber,Type,Bytes,Tag,"TagIn",no_length, - ?PRIMITIVE,opt_or_default), - []; - #'Externaltypereference'{module=CurrentMod,type=Etype} -> - emit([" 'dec_",Etype,"'(",Bytes, - " ,opt_or_default, TagIn ++ ",{asis,Tag},")",nl]), - []; - #'Externaltypereference'{module=Emod,type=Etype} -> - emit([" '",Emod,"':'dec_",Etype,"'(",Bytes, - ", opt_or_defualt, TagIn ++ ",{asis,Tag},")",nl]), - [] - end. - - -more_genfields([]) -> - false; -more_genfields([Field|Fields]) -> - case element(1,Field) of - typefield -> - true; - objectfield -> - true; - _ -> - more_genfields(Fields) - end. - - - -%% Object Set code generating for encoding and decoding -%% ---------------------------------------------------- -gen_objectset_code(Erules,ObjSet) -> - ObjSetName = ObjSet#typedef.name, - Def = ObjSet#typedef.typespec, -% {ClassName,ClassDef} = Def#'ObjectSet'.class, - #'Externaltypereference'{module=ClassModule, - type=ClassName} = Def#'ObjectSet'.class, - ClassDef = asn1_db:dbget(ClassModule,ClassName), - UniqueFName = Def#'ObjectSet'.uniquefname, - Set = Def#'ObjectSet'.set, - emit({nl,nl,nl,"%%================================"}), - emit({nl,"%% ",ObjSetName}), - emit({nl,"%%================================",nl}), - case ClassName of - {_Module,ExtClassName} -> - gen_objset_code(Erules,ObjSetName,UniqueFName,Set, - ExtClassName,ClassDef); - _ -> - gen_objset_code(Erules,ObjSetName,UniqueFName,Set, - ClassName,ClassDef) - end, - emit(nl). - -gen_objset_code(Erules,ObjSetName,UniqueFName,Set,ClassName,ClassDef)-> - ClassFields = (ClassDef#classdef.typespec)#objectclass.fields, - InternalFuncs=gen_objset_enc(ObjSetName,UniqueFName,Set,ClassName,ClassFields,1,[]), - gen_objset_dec(Erules,ObjSetName,UniqueFName,Set,ClassName,ClassFields,1), - gen_internal_funcs(Erules,InternalFuncs). - - -%% gen_objset_enc iterates over the objects of the object set -gen_objset_enc(_,{unique,undefined},_,_,_,_,_) -> - %% There is no unique field in the class of this object set - %% don't bother about the constraint - []; -gen_objset_enc(ObjSName,UniqueName,[{_,no_unique_value,_},T|Rest], - ClName,ClFields,NthObj,Acc) -> - %% No need to check that this class has property OPTIONAL for the - %% unique field, it was detected in the previous phase - gen_objset_enc(ObjSName,UniqueName,[T|Rest],ClName,ClFields,NthObj,Acc); -gen_objset_enc(ObjSetName,UniqueName,[{_,no_unique_value,_}], - _ClName,_ClFields,_NthObj,Acc) -> - %% No need to check that this class has property OPTIONAL for the - %% unique field, it was detected in the previous phase - emit_default_getenc(ObjSetName,UniqueName), - emit({".",nl,nl}), - Acc; -gen_objset_enc(ObjSName,UniqueName, - [{ObjName,Val,Fields},T|Rest],ClName,ClFields,NthObj,Acc)-> - emit({"'getenc_",ObjSName,"'(",{asis,UniqueName},",",{asis,Val},") ->",nl}), - CurrMod = get(currmod), - {InternalFunc,NewNthObj}= - case ObjName of - {no_mod,no_name} -> - gen_inlined_enc_funs(Fields,ClFields,ObjSName,NthObj); - {CurrMod,Name} -> - emit({" fun 'enc_",Name,"'/4"}), - {[],NthObj}; - {ModuleName,Name} -> - emit_ext_fun(enc,ModuleName,Name), -% emit([" {'",ModuleName,"', 'enc_",Name,"'}"]), - {[],NthObj}; - _Other -> - emit({" fun 'enc_",ObjName,"'/4"}), - {[],NthObj} - end, - emit({";",nl}), - gen_objset_enc(ObjSName,UniqueName,[T|Rest],ClName,ClFields, - NewNthObj,InternalFunc ++ Acc); -gen_objset_enc(ObjSetName,UniqueName, - [{ObjName,Val,Fields}],_ClName,ClFields,NthObj,Acc) -> - emit({"'getenc_",ObjSetName,"'(",{asis,UniqueName},",",{asis,Val},") ->",nl}), - CurrMod = get(currmod), - {InternalFunc,_}= - case ObjName of - {no_mod,no_name} -> - gen_inlined_enc_funs(Fields,ClFields,ObjSetName,NthObj); - {CurrMod,Name} -> - emit({" fun 'enc_",Name,"'/4"}), - {[],NthObj}; - {ModuleName,Name} -> - emit_ext_fun(enc,ModuleName,Name), -% emit([" {'",ModuleName,"', 'enc_",Name,"'}"]), - {[],NthObj}; - _Other -> - emit({" fun 'enc_",ObjName,"'/4"}), - {[],NthObj} - end, - emit([";",nl]), - emit_default_getenc(ObjSetName,UniqueName), - emit({".",nl,nl}), - InternalFunc ++ Acc; -%% See X.681 Annex E for the following case -gen_objset_enc(ObjSetName,_UniqueName,['EXTENSIONMARK'], - _ClName,_ClFields,_NthObj,Acc) -> - emit({"'getenc_",ObjSetName,"'(_, _) ->",nl}), - emit({indent(3),"fun(_Attr, Val, _TagIn, _RestPrimFieldName) ->",nl}), - emit({indent(6),"Len = case Val of",nl,indent(9), - "Bin when is_binary(Bin) -> size(Bin);",nl,indent(9), - "_ -> length(Val)",nl,indent(6),"end,"}), - emit({indent(6),"{Val,Len}",nl}), - emit({indent(3),"end.",nl,nl}), - Acc; -gen_objset_enc(ObjSetName,UniqueName,['EXTENSIONMARK','EXTENSIONMARK'|Rest], - ClName,ClFields,NthObj,Acc) -> - gen_objset_enc(ObjSetName,UniqueName,['EXTENSIONMARK'|Rest], - ClName,ClFields,NthObj,Acc); -gen_objset_enc(ObjSetName,UniqueName,['EXTENSIONMARK'|Rest], - ClName,ClFields,NthObj,Acc) -> - gen_objset_enc(ObjSetName,UniqueName,Rest++['EXTENSIONMARK'], - ClName,ClFields,NthObj,Acc); -gen_objset_enc(_,_,[],_,_,_,Acc) -> - Acc. - -emit_ext_fun(EncDec,ModuleName,Name) -> - emit([indent(3),"fun(T,V,_O1,_O2) -> '",ModuleName,"':'",EncDec,"_", - Name,"'(T,V,_O1,_O2) end"]). - -emit_default_getenc(ObjSetName,UniqueName) -> - emit(["'getenc_",ObjSetName,"'(",{asis,UniqueName},", ErrV) ->",nl]), - emit([indent(3),"fun(C,V,_,_) -> exit({'Type not compatible with table constraint',{component,C},{value,V}, {unique_name_and_value,",{asis,UniqueName},", ErrV}}) end"]). - -%% gen_inlined_enc_funs for each object iterates over all fields of a -%% class, and for each typefield it checks if the object has that -%% field and emits the proper code. -gen_inlined_enc_funs(Fields,[{typefield,Name,_}|Rest],ObjSetName, - NthObj) -> - CurrMod = get(currmod), - InternalDefFunName = asn1ct_gen:list2name([NthObj,Name,ObjSetName]), - case lists:keysearch(Name,1,Fields) of - {value,{_,Type}} when is_record(Type,type) -> - emit({indent(3),"fun(Type, Val, TagIn, _RestPrimFieldName) ->",nl, - indent(6),"case Type of",nl}), - {Ret,N} = emit_inner_of_fun(Type,InternalDefFunName), - gen_inlined_enc_funs1(Fields,Rest,ObjSetName,NthObj+N,Ret); - {value,{_,Type}} when is_record(Type,typedef) -> - emit({indent(3),"fun(Type, Val, TagIn, _RestPrimFieldName) ->",nl, - indent(6),"case Type of",nl}), - emit({indent(9),{asis,Name}," ->",nl}), - {Ret,N} = emit_inner_of_fun(Type,InternalDefFunName), - gen_inlined_enc_funs1(Fields,Rest,ObjSetName,NthObj+N,Ret); - {value,{_,#'Externaltypereference'{module=M,type=T}}} -> - #typedef{typespec=Type} = asn1_db:dbget(M,T), - OTag = Type#type.tag, - Tag = [X#tag{class=decode_class(X#tag.class)}|| X <- OTag], - emit([indent(3),"fun(Type, Val, TagIn, _RestPrimFieldName) ->",nl, - indent(6),"case Type of",nl]), - emit([indent(9),{asis,Name}," ->",nl]), - if - M == CurrMod -> - emit([indent(12),"'enc_",T,"'(Val, TagIn ++ ", - {asis,Tag},")"]); - true -> - emit([indent(12),"'",M,"':'enc_",T,"'(Val,TagIn ++", - {asis,Tag},")"]) - end, - gen_inlined_enc_funs1(Fields,Rest,ObjSetName,NthObj,[]); - false -> - %% This field was not present in the object thus there were no - %% type in the table and we therefore generate code that returns - %% the input for application treatment. - emit([indent(3),"fun(Type, Val, TagIn, _RestPrimFieldName) ->",nl, - indent(6),"case Type of",nl]), - emit([indent(9),{asis,Name}," ->",nl]), - emit([indent(12),"Len = case Val of",nl, - indent(15),"Bin when is_binary(Bin) -> size(Bin);",nl, - indent(15),"_ -> length(Val)",nl,indent(12),"end,",nl, - indent(12),"{Val,Len}"]), - gen_inlined_enc_funs1(Fields,Rest,ObjSetName,NthObj,[]) - end; -gen_inlined_enc_funs(Fields,[_H|Rest],ObjSetName,NthObj) -> - gen_inlined_enc_funs(Fields,Rest,ObjSetName,NthObj); -gen_inlined_enc_funs(_,[],_,NthObj) -> - {[],NthObj}. - -gen_inlined_enc_funs1(Fields,[{typefield,Name,_}|Rest],ObjSetName, - NthObj,Acc) -> - CurrMod = get(currmod), - InternalDefFunName = asn1ct_gen:list2name([NthObj,Name,ObjSetName]), - {Acc2,NAdd}= - case lists:keysearch(Name,1,Fields) of - {value,{_,Type}} when is_record(Type,type) -> - emit({";",nl}), - {Ret,N}=emit_inner_of_fun(Type,InternalDefFunName), - {Ret++Acc,N}; - {value,{_,Type}} when is_record(Type,typedef) -> - emit({";",nl,indent(9),{asis,Name}," ->",nl}), - {Ret,N}=emit_inner_of_fun(Type,InternalDefFunName), - {Ret++Acc,N}; - {value,{_,#'Externaltypereference'{module=M,type=T}}} -> - #typedef{typespec=Type} = asn1_db:dbget(M,T), - OTag = Type#type.tag, - Tag = [X#tag{class=decode_class(X#tag.class)}|| X <- OTag], - emit({";",nl,indent(9),{asis,Name}," ->",nl}), - if - M == CurrMod -> - emit([indent(12),"'enc_",T,"'(Val, TagIn ++ ", - {asis,Tag},")"]); - true -> - emit([indent(12),"'",M,"':'enc_",T,"'(Val,TagIn ++", - {asis,Tag},")"]) - end, - {Acc,0}; - false -> - %% This field was not present in the object thus there were no - %% type in the table and we therefore generate code that returns - %% the input for application treatment. - emit([";",nl,indent(9),{asis,Name}," ->",nl]), - emit([indent(12),"Len = case Val of",nl, - indent(15),"Bin when is_binary(Bin) -> size(Bin);",nl, - indent(15),"_ -> length(Val)",nl,indent(12),"end,",nl, - indent(12),"{Val,Len}"]), - {Acc,0} - end, - gen_inlined_enc_funs1(Fields,Rest,ObjSetName,NthObj+NAdd,Acc2); -gen_inlined_enc_funs1(Fields,[_H|Rest],ObjSetName,NthObj,Acc)-> - gen_inlined_enc_funs1(Fields,Rest,ObjSetName,NthObj,Acc); -gen_inlined_enc_funs1(_,[],_,NthObj,Acc) -> - emit({nl,indent(6),"end",nl}), - emit({indent(3),"end"}), - {Acc,NthObj}. - - -emit_inner_of_fun(TDef = #typedef{name={ExtMod,Name},typespec=Type}, - InternalDefFunName) -> - OTag = Type#type.tag, - Tag = [X#tag{class=decode_class(X#tag.class)}|| X <- OTag], - case {ExtMod,Name} of - {primitive,bif} -> - emit(indent(12)), - gen_encode_prim(ber,Type,["TagIn ++ ",{asis,Tag}],"Val"), - {[],0}; - {constructed,bif} -> - emit([indent(12),"'enc_", - InternalDefFunName,"'(Val,TagIn ++ ", - {asis,Tag},")"]), - {[TDef#typedef{name=InternalDefFunName}],1}; - _ -> - emit({indent(12),"'",ExtMod,"':'enc_",Name,"'(Val, TagIn ++ ", - {asis,Tag},")"}), - {[],0} - end; -emit_inner_of_fun(#typedef{name=Name,typespec=Type},_) -> - OTag = Type#type.tag, - Tag = [X#tag{class=decode_class(X#tag.class)}|| X <- OTag], - emit({indent(12),"'enc_",Name,"'(Val, TagIn ++ ",{asis,Tag},")"}), - {[],0}; -emit_inner_of_fun(Type,_) when is_record(Type,type) -> - CurrMod = get(currmod), - OTag = Type#type.tag, - Tag = [X#tag{class=decode_class(X#tag.class)}|| X <- OTag], - case Type#type.def of - Def when is_atom(Def) -> - emit({indent(9),Def," ->",nl,indent(12)}), - gen_encode_prim(ber,Type,["TagIn ++ ",{asis,Tag}],"Val"); - TRef when is_record(TRef,typereference) -> - T = TRef#typereference.val, - emit({indent(9),T," ->",nl,indent(12),"'enc_",T, - "'(Val, TagIn ++ ",{asis,Tag},")"}); - #'Externaltypereference'{module=CurrMod,type=T} -> - emit({indent(9),T," ->",nl,indent(12),"'enc_",T, - "'(Val, TagIn ++ ",{asis,Tag},")"}); - #'Externaltypereference'{module=ExtMod,type=T} -> - emit({indent(9),T," ->",nl,indent(12),ExtMod,":'enc_", - T,"'(Val, TagIn ++ ",{asis,Tag},")"}) - end, - {[],0}. - -indent(N) -> - lists:duplicate(N,32). % 32 = space - - -gen_objset_dec(_,_,{unique,undefined},_,_,_,_) -> - %% There is no unique field in the class of this object set - %% don't bother about the constraint - ok; -gen_objset_dec(Erules,ObjSName,UniqueName,[{_,no_unique_value,_},T|Rest], - ClName,ClFields,NthObj)-> - gen_objset_dec(Erules,ObjSName,UniqueName,[T|Rest],ClName,ClFields, - NthObj); -gen_objset_dec(_Erules,ObjSetName,UniqueName,[{_,no_unique_value,_}], - _ClName,_ClFields,_NthObj)-> - emit_default_getdec(ObjSetName,UniqueName), - emit({".",nl,nl}); -gen_objset_dec(Erules,ObjSName,UniqueName,[{ObjName,Val,Fields},T|Rest], - ClName,ClFields,NthObj)-> - emit({"'getdec_",ObjSName,"'(",{asis,UniqueName},",",{asis,Val}, - ") ->",nl}), - CurrMod = get(currmod), - NewNthObj= - case ObjName of - {no_mod,no_name} -> - gen_inlined_dec_funs(Erules,Fields,ClFields,ObjSName, - NthObj); - {CurrMod,Name} -> - emit({" fun 'dec_",Name,"'/4"}), - NthObj; - {ModName,Name} -> - emit_ext_fun(dec,ModName,Name), -% emit([" {'",ModName,"', 'dec_",Name,"'}"]), - NthObj; - _Other -> - emit({" fun 'dec_",ObjName,"'/4"}), - NthObj - end, - emit({";",nl}), - gen_objset_dec(Erules,ObjSName,UniqueName,[T|Rest],ClName,ClFields, - NewNthObj); -gen_objset_dec(Erules,ObjSetName,UniqueName,[{ObjName,Val,Fields}],_ClName, - ClFields,NthObj) -> - emit({"'getdec_",ObjSetName,"'(",{asis,UniqueName},",",{asis,Val},") ->",nl}), - CurrMod = get(currmod), - case ObjName of - {no_mod,no_name} -> - gen_inlined_dec_funs(Erules,Fields,ClFields,ObjSetName, - NthObj); - {CurrMod,Name} -> - emit({" fun 'dec_",Name,"'/4"}); - {ModName,Name} -> - emit_ext_fun(dec,ModName,Name); -% emit([" {'",ModName,"', 'dec_",Name,"'}"]); - _Other -> - emit({" fun 'dec_",ObjName,"'/4"}) - end, - emit({";",nl}), - emit_default_getdec(ObjSetName,UniqueName), - emit({".",nl,nl}); -gen_objset_dec(_,ObjSetName,_UniqueName,['EXTENSIONMARK'],_ClName,_ClFields, - _NthObj) -> - emit({"'getdec_",ObjSetName,"'(_, _) ->",nl}), - emit({indent(3),"fun(_, Bytes, _, _) ->",nl}), - emit({indent(6),"Len = case Bytes of",nl,indent(9), - "Bin when is_binary(Bin) -> size(Bin);",nl,indent(9), - "_ -> length(Bytes)",nl,indent(6),"end,"}), - emit({indent(6),"{Bytes,[],Len}",nl}), - emit({indent(3),"end.",nl,nl}), - ok; -gen_objset_dec(Erule,ObjSetName,UniqueName, - ['EXTENSIONMARK','EXTENSIONMARK'|Rest], - ClName,ClFields,NthObj) -> - gen_objset_dec(Erule,ObjSetName,UniqueName,['EXTENSIONMARK'|Rest], - ClName,ClFields,NthObj); -gen_objset_dec(Erule,ObjSetName,UniqueName,['EXTENSIONMARK'|Rest], - ClName,ClFields,NthObj) -> - gen_objset_dec(Erule,ObjSetName,UniqueName,Rest++['EXTENSIONMARK'], - ClName,ClFields,NthObj); -gen_objset_dec(_,_,_,[],_,_,_) -> - ok. - -emit_default_getdec(ObjSetName,UniqueName) -> - emit(["'getdec_",ObjSetName,"'(",{asis,UniqueName},", ErrV) ->",nl]), - emit([indent(3),"fun(C,V,_,_) -> exit({{component,C},{value,V}, {unique_name_and_value,",{asis,UniqueName},", ErrV}}) end"]). - -gen_inlined_dec_funs(Erules,Fields,[{typefield,Name,Prop}|Rest], - ObjSetName,NthObj) -> - DecProp = case Prop of - 'OPTIONAL' -> opt_or_default; - {'DEFAULT',_} -> opt_or_default; - _ -> mandatory - end, - CurrMod = get(currmod), - InternalDefFunName = [NthObj,Name,ObjSetName], - case lists:keysearch(Name,1,Fields) of - {value,{_,Type}} when is_record(Type,type) -> - emit({indent(3),"fun(Type, Bytes, TagIn, _RestPrimFieldName) ->", - nl,indent(6),"case Type of",nl}), - N=emit_inner_of_decfun(Erules,Type,DecProp,InternalDefFunName), - gen_inlined_dec_funs1(Erules,Fields,Rest,ObjSetName,NthObj+N); - {value,{_,Type}} when is_record(Type,typedef) -> - emit({indent(3),"fun(Type, Bytes, TagIn, _RestPrimFieldName) ->", - nl,indent(6),"case Type of",nl}), - emit({indent(9),{asis,Name}," ->",nl}), - N=emit_inner_of_decfun(Erules,Type,DecProp,InternalDefFunName), - gen_inlined_dec_funs1(Erules,Fields,Rest,ObjSetName,NthObj+N); - {value,{_,#'Externaltypereference'{module=M,type=T}}} -> - #typedef{typespec=Type} = asn1_db:dbget(M,T), - OTag = Type#type.tag, - Tag = [X#tag{class=decode_class(X#tag.class)}|| X <- OTag], - emit({indent(3),"fun(Type, Bytes, TagIn, _RestPrimFieldName) ->", - nl,indent(6),"case Type of",nl}), - emit({indent(9),{asis,Name}," ->",nl}), - if - M == CurrMod -> - emit([indent(12),"'dec_",T,"'(Bytes, ",DecProp, - ", TagIn ++ ",{asis,Tag},")"]); - true -> - emit([indent(12),"'",M,"':'dec_",T,"'(Bytes, ", - DecProp,", TagIn ++ ",{asis,Tag},")"]) - end, - gen_inlined_dec_funs1(Erules,Fields,Rest,ObjSetName,NthObj); - false -> - emit([indent(3),"fun(Type, Bytes, TagIn, _RestPrimFieldName) ->", - nl,indent(6),"case Type of",nl, - indent(9),{asis,Name}," ->",nl, - indent(12),"Len = case Bytes of",nl, - indent(15),"B when is_binary(B) -> size(B);",nl, - indent(15),"_ -> length(Bytes)",nl, - indent(12),"end,",nl, - indent(12),"{Bytes,[],Len}"]), - gen_inlined_dec_funs1(Erules,Fields,Rest,ObjSetName,NthObj) - end; -gen_inlined_dec_funs(Erules,Fields,[_H|Rest],ObjSetName,NthObj) -> - gen_inlined_dec_funs(Erules,Fields,Rest,ObjSetName,NthObj); -gen_inlined_dec_funs(_,_,[],_,NthObj) -> - NthObj. - -gen_inlined_dec_funs1(Erules,Fields,[{typefield,Name,Prop}|Rest], - ObjSetName,NthObj) -> - DecProp = case Prop of - 'OPTIONAL' -> opt_or_default; - {'DEFAULT',_} -> opt_or_default; - _ -> mandatory - end, - CurrMod = get(currmod), - InternalDefFunName = [NthObj,Name,ObjSetName], - N= - case lists:keysearch(Name,1,Fields) of - {value,{_,Type}} when is_record(Type,type) -> - emit({";",nl}), - emit_inner_of_decfun(Erules,Type,DecProp,InternalDefFunName); - {value,{_,Type}} when is_record(Type,typedef) -> - emit({";",nl,indent(9),{asis,Name}," ->",nl}), - emit_inner_of_decfun(Erules,Type,DecProp,InternalDefFunName); - {value,{_,#'Externaltypereference'{module=M,type=T}}} -> - #typedef{typespec=Type} = asn1_db:dbget(M,T), - OTag = Type#type.tag, - Tag = [X#tag{class=decode_class(X#tag.class)}|| X <- OTag], - emit({";",nl,indent(9),{asis,Name}," ->",nl}), - if - M == CurrMod -> - emit([indent(12),"'dec_",T,"'(Bytes, ",DecProp, - ", TagIn ++ ",{asis,Tag},")"]); - true -> - emit([indent(12),"'",M,"':'dec_",T,"'(Bytes, ", - DecProp,", TagIn ++ ",{asis,Tag},")"]) - end, - 0; - false -> - emit([";",nl, - indent(9),{asis,Name}," ->",nl, - indent(12),"Len = case Bytes of",nl, - indent(15),"B when is_binary(B) -> size(B);",nl, - indent(15),"_ -> length(Bytes)",nl, - indent(12),"end,",nl, - indent(12),"{Bytes,[],Len}"]), - 0 - end, - gen_inlined_dec_funs1(Erules,Fields,Rest,ObjSetName,NthObj+N); -gen_inlined_dec_funs1(Erules,Fields,[_H|Rest],ObjSetName,NthObj)-> - gen_inlined_dec_funs1(Erules,Fields,Rest,ObjSetName,NthObj); -gen_inlined_dec_funs1(_,_,[],_,NthObj) -> - emit({nl,indent(6),"end",nl}), - emit({indent(3),"end"}), - NthObj. - -emit_inner_of_decfun(Erules,#typedef{name={ExtName,Name},typespec=Type}, - Prop,InternalDefFunName) -> - OTag = Type#type.tag, - Tag = [X#tag{class=decode_class(X#tag.class)}|| X <- OTag], - case {ExtName,Name} of - {primitive,bif} -> - emit(indent(12)), - gen_dec_prim(Erules,Type,"Bytes",Tag,"TagIn",no_length, - ?PRIMITIVE,Prop), - 0; - {constructed,bif} -> - emit({indent(12),"'dec_", - asn1ct_gen:list2name(InternalDefFunName),"'(Bytes, ",Prop, - ", TagIn ++ ",{asis,Tag},")"}), - 1; - _ -> - emit({indent(12),"'",ExtName,"':'dec_",Name,"'(Bytes, ",Prop, - ", TagIn ++ ",{asis,Tag},")"}), - 0 - end; -emit_inner_of_decfun(_,#typedef{name=Name,typespec=Type},Prop,_) -> - OTag = Type#type.tag, - Tag = [X#tag{class=decode_class(X#tag.class)}|| X <- OTag], - emit({indent(12),"'dec_",Name,"'(Bytes, ",Prop,", TagIn ++ ", - {asis,Tag},")"}), - 0; -emit_inner_of_decfun(Erules,Type,Prop,_) when is_record(Type,type) -> - OTag = Type#type.tag, - Tag = [X#tag{class=decode_class(X#tag.class)}|| X <- OTag], - CurrMod = get(currmod), - Def = Type#type.def, - InnerType = asn1ct_gen:get_inner(Def), - WhatKind = asn1ct_gen:type(InnerType), - case WhatKind of - {primitive,bif} -> - emit({indent(9),Def," ->",nl,indent(12)}), - gen_dec_prim(Erules,Type,"Bytes",Tag,"TagIn",no_length, - ?PRIMITIVE,Prop); -% TRef when is_record(TRef,typereference) -> -% T = TRef#typereference.val, -% emit({indent(9),T," ->",nl,indent(12),"'dec_",T,"'(Val)"}); - #'Externaltypereference'{module=CurrMod,type=T} -> - emit({indent(9),T," ->",nl,indent(12),"'dec_",T, - "'(Bytes, ",Prop,", TagIn ++ ",{asis,Tag},")"}); - #'Externaltypereference'{module=ExtMod,type=T} -> - emit({indent(9),T," ->",nl,indent(12),ExtMod,":'dec_", - T,"'(Bytes, ",Prop,", TagIn ++ ",{asis,Tag},")"}) - end, - 0. - - -gen_internal_funcs(_,[]) -> - ok; -gen_internal_funcs(Erules,[TypeDef|Rest]) -> - gen_encode_user(Erules,TypeDef), - emit({"'dec_",TypeDef#typedef.name,"'(Bytes, ", - unused_optormand_var("OptOrMand",(TypeDef#typedef.typespec)#type.def),", TagIn) ->",nl}), - gen_decode_user(Erules,TypeDef), - gen_internal_funcs(Erules,Rest). - - -dbdec(Type) -> - demit({"io:format(\"decoding: ",{asis,Type},"~w~n\",[Bytes]),",nl}). - - -decode_class('UNIVERSAL') -> - ?UNIVERSAL; -decode_class('APPLICATION') -> - ?APPLICATION; -decode_class('CONTEXT') -> - ?CONTEXT; -decode_class('PRIVATE') -> - ?PRIVATE. - -decode_type('BOOLEAN') -> 1; -decode_type('INTEGER') -> 2; -decode_type('BIT STRING') -> 3; -decode_type('OCTET STRING') -> 4; -decode_type('NULL') -> 5; -decode_type('OBJECT IDENTIFIER') -> 6; -decode_type('ObjectDescriptor') -> 7; -decode_type('EXTERNAL') -> 8; -decode_type('REAL') -> 9; -decode_type('ENUMERATED') -> 10; -decode_type('EMBEDDED_PDV') -> 11; -decode_type('UTF8String') -> 12; -decode_type('RELATIVE-OID') -> 13; -decode_type('SEQUENCE') -> 16; -decode_type('SEQUENCE OF') -> 16; -decode_type('SET') -> 17; -decode_type('SET OF') -> 17; -decode_type('NumericString') -> 18; -decode_type('PrintableString') -> 19; -decode_type('TeletexString') -> 20; -decode_type('T61String') -> 20; -decode_type('VideotexString') -> 21; -decode_type('IA5String') -> 22; -decode_type('UTCTime') -> 23; -decode_type('GeneralizedTime') -> 24; -decode_type('GraphicString') -> 25; -decode_type('VisibleString') -> 26; -decode_type('GeneralString') -> 27; -decode_type('UniversalString') -> 28; -decode_type('BMPString') -> 30; -decode_type('CHOICE') -> 'CHOICE'; % choice gets the tag from the actual alternative -decode_type(Else) -> exit({error,{asn1,{unrecognized_type,Else}}}). - -add_removed_bytes() -> - asn1ct_name:delete(rb), - add_removed_bytes(asn1ct_name:all(rb)). - -add_removed_bytes([H,T1|T]) -> - emit({{var,H},"+"}), - add_removed_bytes([T1|T]); -add_removed_bytes([H|T]) -> - emit({{var,H}}), - add_removed_bytes(T); -add_removed_bytes([]) -> - true. - -mkfuncname(WhatKind,DecOrEnc) -> - case WhatKind of - #'Externaltypereference'{module=Mod,type=EType} -> - CurrMod = get(currmod), - case CurrMod of - Mod -> - lists:concat(["'",DecOrEnc,"_",EType,"'"]); - _ -> -% io:format("CurrMod: ~p, Mod: ~p~n",[CurrMod,Mod]), - lists:concat(["'",Mod,"':'",DecOrEnc,"_",EType,"'"]) - end; - #'typereference'{val=EType} -> - lists:concat(["'",DecOrEnc,"_",EType,"'"]); - 'ASN1_OPEN_TYPE' -> - lists:concat(["'",DecOrEnc,"_",WhatKind,"'"]) - - end. - -optionals(L) -> optionals(L,[],1). - -optionals([{'EXTENSIONMARK',_,_}|Rest],Acc,Pos) -> - optionals(Rest,Acc,Pos); % optionals in extension are currently not handled -optionals([#'ComponentType'{name=Name,prop='OPTIONAL'}|Rest],Acc,Pos) -> - optionals(Rest,[{Name,Pos}|Acc],Pos+1); -optionals([#'ComponentType'{name=Name,prop={'DEFAULT',_}}|Rest],Acc,Pos) -> - optionals(Rest,[{Name,Pos}|Acc],Pos+1); -optionals([#'ComponentType'{}|Rest],Acc,Pos) -> - optionals(Rest,Acc,Pos+1); -optionals([],Acc,_) -> - lists:reverse(Acc). - -get_constraint(C,Key) -> - case lists:keysearch(Key,1,C) of - false -> - no; - {value,{_,V}} -> - V - end. - -%% if the original option was ber and it has been wrapped to ber_bin -%% turn it back to ber -re_wrap_erule(ber_bin) -> - case get(encoding_options) of - Options when is_list(Options) -> - case lists:member(ber,Options) of - true -> ber; - _ -> ber_bin - end; - _ -> ber_bin - end; -re_wrap_erule(Erule) -> - Erule. - -is_already_generated(Operation,Name) -> - case get(class_default_type) of - undefined -> - put(class_default_type,[{Operation,Name}]), - false; - GeneratedList -> - case lists:member({Operation,Name},GeneratedList) of - true -> - true; - false -> - put(class_default_type,[{Operation,Name}|GeneratedList]), - false - end - end. - -get_class_fields(#classdef{typespec=ObjClass}) -> - ObjClass#objectclass.fields; -get_class_fields(#objectclass{fields=Fields}) -> - Fields; -get_class_fields(_) -> - []. - -get_object_field(Name,ObjectFields) -> - case lists:keysearch(Name,1,ObjectFields) of - {value,Field} -> Field; - false -> false - end. - -%% For BER the ExtensionAdditionGroup notation has no impact on the encoding/decoding -%% and therefore we only filter away the ExtensionAdditionGroup start and end markers -%% -extaddgroup2sequence(ExtList) when is_list(ExtList) -> - lists:filter(fun(#'ExtensionAdditionGroup'{}) -> - false; - ('ExtensionAdditionGroupEnd') -> - false; - (_) -> - true - end, ExtList). diff --git a/lib/asn1/src/asn1ct_gen_ber_bin_v2.erl b/lib/asn1/src/asn1ct_gen_ber_bin_v2.erl index 3ccfca3784..00c3dd98b2 100644 --- a/lib/asn1/src/asn1ct_gen_ber_bin_v2.erl +++ b/lib/asn1/src/asn1ct_gen_ber_bin_v2.erl @@ -116,22 +116,7 @@ gen_encode(Erules,Typename,Type) when is_record(Type,type) -> end, case lists:member(InnerType,['SET','SEQUENCE']) of true -> - case get(asn_keyed_list) of - true -> - CompList = - case Type#type.def of - #'SEQUENCE'{components=Cl} -> Cl; - #'SET'{components=Cl} -> Cl - end, - emit([nl,"'enc_",asn1ct_gen:list2name(Typename), - "'(Val, TagIn",ObjFun, - ") when is_list(Val) ->",nl]), - emit([" 'enc_",asn1ct_gen:list2name(Typename), - "'(?RT_BER:fixoptionals(", - {asis,optionals(CompList)}, - ",Val), TagIn",ObjFun,");",nl,nl]); - _ -> true - end; + true; _ -> emit([nl,"'enc_",asn1ct_gen:list2name(Typename), "'({'",asn1ct_gen:list2name(Typename), @@ -175,22 +160,7 @@ gen_encode_user(Erules,D) when is_record(D,typedef) -> case lists:member(InnerType,['SET','SEQUENCE']) of true -> - case get(asn_keyed_list) of - true -> - CompList = - case Type#type.def of - #'SEQUENCE'{components=Cl} -> Cl; - #'SET'{components=Cl} -> Cl - end, - - emit([nl,"'enc_",asn1ct_gen:list2name(Typename), - "'(Val, TagIn) when is_list(Val) ->",nl]), - emit([" 'enc_",asn1ct_gen:list2name(Typename), - "'(?RT_BER:fixoptionals(", - {asis,optionals(CompList)}, - ",Val), TagIn);",nl,nl]); - _ -> true - end; + true; _ -> emit({nl,"'enc_",asn1ct_gen:list2name(Typename), "'({'",asn1ct_gen:list2name(Typename),"',Val}, TagIn) ->",nl}), @@ -1504,7 +1474,7 @@ gen_objset_dec(Erules,ObjSetName,_UniqueName,['EXTENSIONMARK'],_ClName, emit([indent(2),"fun(_,Bytes, _RestPrimFieldName) ->",nl]), case Erules of - ber_bin_v2 -> + ber -> emit([indent(4),"case Bytes of",nl, indent(6),"Bin when is_binary(Bin) -> ",nl, indent(8),"Bin;",nl, @@ -1772,19 +1742,6 @@ mkfuncname(WhatKind,DecOrEnc) -> end. -optionals(L) -> optionals(L,[],1). - -optionals([{'EXTENSIONMARK',_,_}|Rest],Acc,Pos) -> - optionals(Rest,Acc,Pos); % optionals in extension are currently not handled -optionals([#'ComponentType'{name=Name,prop='OPTIONAL'}|Rest],Acc,Pos) -> - optionals(Rest,[{Name,Pos}|Acc],Pos+1); -optionals([#'ComponentType'{name=Name,prop={'DEFAULT',_}}|Rest],Acc,Pos) -> - optionals(Rest,[{Name,Pos}|Acc],Pos+1); -optionals([#'ComponentType'{}|Rest],Acc,Pos) -> - optionals(Rest,Acc,Pos+1); -optionals([],Acc,_) -> - lists:reverse(Acc). - get_constraint(C,Key) -> case lists:keysearch(Key,1,C) of false -> diff --git a/lib/asn1/src/asn1ct_gen_per.erl b/lib/asn1/src/asn1ct_gen_per.erl index bd5b81991d..eb4cfdccc6 100644 --- a/lib/asn1/src/asn1ct_gen_per.erl +++ b/lib/asn1/src/asn1ct_gen_per.erl @@ -25,6 +25,7 @@ -include("asn1_records.hrl"). %-compile(export_all). +-export([gen_dec_imm/2]). -export([pgen/4,gen_dec_prim/3,gen_encode_prim/4]). -export([gen_obj_code/3,gen_objectset_code/2]). -export([gen_decode/2, gen_decode/3]). @@ -146,16 +147,18 @@ gen_encode_prim(Erules,D,DoTag,Value) when is_record(D,type) -> case D#type.def of 'INTEGER' -> emit({"?RT_PER:encode_integer(", %fel - {asis,effective_constraint(integer,Constraint)},",",Value,")"}); + {asis,asn1ct_imm:effective_constraint(integer,Constraint)}, + ",",Value,")"}); {'INTEGER',NamedNumberList} -> emit({"?RT_PER:encode_integer(", - {asis,effective_constraint(integer,Constraint)},",",Value,",", + {asis,asn1ct_imm:effective_constraint(integer,Constraint)}, + ",",Value,",", {asis,NamedNumberList},")"}); {'ENUMERATED',{Nlist1,Nlist2}} -> NewList = lists:concat([[{0,X}||{X,_} <- Nlist1],['EXT_MARK'],[{1,X}||{X,_} <- Nlist2]]), NewC = [{'ValueRange',{0,length(Nlist1)-1}}], case Erules of - uper_bin -> + uper -> emit(["case ",Value," of",nl]); _ -> emit(["case (case ",Value," of {_,",{curr,enumval},"}-> ", @@ -168,7 +171,7 @@ gen_encode_prim(Erules,D,DoTag,Value) when is_record(D,type) -> NewList = [X||{X,_} <- NamedNumberList], NewC = [{'ValueRange',{0,length(NewList)-1}}], case Erules of - uper_bin -> + uper -> emit(["case ",Value," of",nl]); _ -> emit(["case (case ",Value," of {_,",{curr,enumval}, @@ -184,7 +187,7 @@ gen_encode_prim(Erules,D,DoTag,Value) when is_record(D,type) -> {asis,Constraint},",",Value,",", {asis,NamedNumberList},")"}); 'NULL' -> - emit({"?RT_PER:encode_null(",Value,")"}); + emit("[]"); 'OBJECT IDENTIFIER' -> emit({"?RT_PER:encode_object_identifier(",Value,")"}); 'RELATIVE-OID' -> @@ -274,7 +277,7 @@ emit_enc_enumerated_cases(Erule, C, [H1,H2|T], Count) -> -emit_enc_enumerated_case(uper_bin,_C, {asn1_enum,High}, _) -> +emit_enc_enumerated_case(uper,_C, {asn1_enum,High}, _) -> emit([ "{asn1_enum,EnumV} when is_integer(EnumV), EnumV > ",High," -> ", "[<<1:1>>,?RT_PER:encode_small_number(EnumV)]"]); @@ -284,118 +287,27 @@ emit_enc_enumerated_case(_Per,_C, {asn1_enum,High}, _) -> "[{bit,1},?RT_PER:encode_small_number(EnumV)]"]); emit_enc_enumerated_case(_Erule, _C, 'EXT_MARK', _Count) -> true; -emit_enc_enumerated_case(uper_bin,_C, {1,EnumName}, Count) -> +emit_enc_enumerated_case(uper,_C, {1,EnumName}, Count) -> emit(["'",EnumName,"' -> [<<1:1>>,?RT_PER:encode_small_number(",Count,")]"]); emit_enc_enumerated_case(_Per,_C, {1,EnumName}, Count) -> emit(["'",EnumName,"' -> [{bit,1},?RT_PER:encode_small_number(",Count,")]"]); -emit_enc_enumerated_case(uper_bin,C, {0,EnumName}, Count) -> +emit_enc_enumerated_case(uper,C, {0,EnumName}, Count) -> emit(["'",EnumName,"' -> [<<0:1>>,?RT_PER:encode_integer(",{asis,C},", ",Count,")]"]); emit_enc_enumerated_case(_Per,C, {0,EnumName}, Count) -> emit(["'",EnumName,"' -> [{bit,0},?RT_PER:encode_integer(",{asis,C},", ",Count,")]"]); emit_enc_enumerated_case(_Erule, C, EnumName, Count) -> emit(["'",EnumName,"' -> ?RT_PER:encode_integer(",{asis,C},", ",Count,")"]). -%% effective_constraint(Type,C) -%% Type = atom() -%% C = [C1,...] -%% C1 = {'SingleValue',SV} | {'ValueRange',VR} | {atom(),term()} -%% SV = integer() | [integer(),...] -%% VR = {Lb,Ub} -%% Lb = 'MIN' | integer() -%% Ub = 'MAX' | integer() -%% Returns a single value if C only has a single value constraint, and no -%% value range constraints, that constrains to a single value, otherwise -%% returns a value range that has the lower bound set to the lowest value -%% of all single values and lower bound values in C and the upper bound to -%% the greatest value. -effective_constraint(integer,[C={{_,_},_}|_Rest]) -> % extension - [C]; %% [C|effective_constraint(integer,Rest)]; XXX what is possible ??? -effective_constraint(integer,C) -> - SVs = get_constraints(C,'SingleValue'), - SV = effective_constr('SingleValue',SVs), - VRs = get_constraints(C,'ValueRange'), - VR = effective_constr('ValueRange',VRs), - greatest_common_range(SV,VR). - -effective_constr(_,[]) -> - []; -effective_constr('SingleValue',List) -> - SVList = lists:flatten(lists:map(fun(X)->element(2,X)end,List)), - %% Sort and remove duplicates before generating SingleValue or ValueRange - %% In case of ValueRange, also check for 'MIN and 'MAX' - case lists:usort(SVList) of - [N] -> - [{'SingleValue',N}]; - L when is_list(L) -> - [{'ValueRange',{least_Lb(L),greatest_Ub(L)}}] - end; -effective_constr('ValueRange',List) -> - LBs = lists:map(fun({_,{Lb,_}})-> Lb end,List), - UBs = lists:map(fun({_,{_,Ub}})-> Ub end,List), - Lb = least_Lb(LBs), - [{'ValueRange',{Lb,lists:max(UBs)}}]. - -greatest_common_range([],VR) -> - VR; -greatest_common_range(SV,[]) -> - SV; -greatest_common_range(SV,VR) -> - greatest_common_range2(mk_vr(SV),mk_vr(VR)). -greatest_common_range2({_,Int},{'MIN',Ub}) when is_integer(Int), - Int > Ub -> - [{'ValueRange',{'MIN',Int}}]; -greatest_common_range2({_,Int},{Lb,Ub}) when is_integer(Int), - Int < Lb -> - [{'ValueRange',{Int,Ub}}]; -greatest_common_range2({_,Int},VR={_Lb,_Ub}) when is_integer(Int) -> - [{'ValueRange',VR}]; -greatest_common_range2({_,L},{Lb,Ub}) when is_list(L) -> - Min = least_Lb([Lb|L]), - Max = greatest_Ub([Ub|L]), - [{'ValueRange',{Min,Max}}]; -greatest_common_range2({Lb1,Ub1},{Lb2,Ub2}) -> - Min = least_Lb([Lb1,Lb2]), - Max = greatest_Ub([Ub1,Ub2]), - [{'ValueRange',{Min,Max}}]. - -mk_vr([{Type,I}]) when is_atom(Type), is_integer(I) -> - {I,I}; -mk_vr([{Type,{Lb,Ub}}]) when is_atom(Type) -> - {Lb,Ub}; -mk_vr(Other) -> - Other. - -least_Lb(L) -> - case lists:member('MIN',L) of - true -> 'MIN'; - _ -> lists:min(L) - end. - -greatest_Ub(L) -> - case lists:member('MAX',L) of - true -> 'MAX'; - _ -> lists:max(L) - end. - - -get_constraints(L=[{Key,_}],Key) -> - L; -get_constraints([],_) -> - []; -get_constraints(C,Key) -> - {value,L} = keysearch_allwithkey(Key,1,C,[]), - L. - -keysearch_allwithkey(Key,Ix,C,Acc) -> - case lists:keysearch(Key,Ix,C) of - false -> - {value,Acc}; - {value,T} -> - RestC = lists:delete(T,C), - keysearch_allwithkey(Key,Ix,RestC,[T|Acc]) +get_constraint([{Key,V}], Key) -> + V; +get_constraint([], _) -> + no; +get_constraint(C, Key) -> + case lists:keyfind(Key, 1, C) of + false -> no; + {Key,V} -> V end. - %% Object code generating for encoding and decoding %% ------------------------------------------------ @@ -442,7 +354,7 @@ gen_encode_objectfields(Erule,ClassName,[{typefield,Name,OptOrMand}|Rest], {false,'OPTIONAL'} -> EmitFuncClause("Val"), case Erule of - uper_bin -> + uper -> emit(" Val"); _ -> emit(" [{octets,Val}]") @@ -833,7 +745,7 @@ gen_objset_enc(Erule,ObjSetName,_UniqueName,['EXTENSIONMARK'],_ClName, emit({"'getenc_",ObjSetName,"'(_, _) ->",nl}), emit({indent(3),"fun(_, Val, _) ->",nl}), case Erule of - uper_bin -> + uper -> emit([indent(6),"Val",nl]); _ -> emit([indent(6),"[{octets,Val}]",nl]) @@ -883,7 +795,7 @@ gen_inlined_enc_funs(Erule,Fields,[{typefield,Name,_}|Rest],ObjSetName,NthObj) - emit({indent(9),{asis,Name}," ->",nl}), emit([indent(12),"'",M,"'",":'enc_",T,"'(Val)"]), gen_inlined_enc_funs1(Erule,Fields,Rest,ObjSetName,NthObj,[]); - false when Erule == uper_bin -> + false when Erule =:= uper -> emit([indent(3),"fun(Type,Val,_) ->",nl, indent(6),"case Type of",nl, indent(9),{asis,Name}," -> Val",nl]), @@ -921,7 +833,7 @@ gen_inlined_enc_funs1(Erule,Fields,[{typefield,Name,_}|Rest],ObjSetName, emit({";",nl,indent(9),{asis,Name}," ->",nl}), emit([indent(12),"'",M,"'",":'enc_",T,"'(Val)"]), {Acc,0}; - false when Erule == uper_bin -> + false when Erule =:= uper -> emit([";",nl, indent(9),{asis,Name}," -> ",nl, "Val",nl]), @@ -1228,19 +1140,43 @@ gen_decode_user(Erules,D) when is_record(D,typedef) -> exit({error,{asn1,{unknown,Other}}}) end. +gen_dec_imm(Erule, #type{def=Name,constraint=C}) -> + Aligned = case Erule of + uper -> false; + per -> true + end, + gen_dec_imm_1(Name, C, Aligned). + +gen_dec_imm_1('BOOLEAN', _Constr, _Aligned) -> + asn1ct_imm:per_dec_boolean(); +gen_dec_imm_1({'ENUMERATED',{Base,Ext}}, _Constr, Aligned) -> + asn1ct_imm:per_dec_enumerated(Base, Ext, Aligned); +gen_dec_imm_1({'ENUMERATED',NamedNumberList}, _Constr, Aligned) -> + asn1ct_imm:per_dec_enumerated(NamedNumberList, Aligned); +gen_dec_imm_1('INTEGER', Constr, Aligned) -> + asn1ct_imm:per_dec_integer(Constr, Aligned); +gen_dec_imm_1({'INTEGER',NamedNumberList}, Constraint, Aligned) -> + asn1ct_imm:per_dec_named_integer(Constraint, + NamedNumberList, + Aligned); +gen_dec_imm_1('OCTET STRING', Constraint, Aligned) -> + SzConstr = get_constraint(Constraint, 'SizeConstraint'), + Imm = asn1ct_imm:per_dec_octet_string(SzConstr, Aligned), + {convert,binary_to_list,Imm}; +gen_dec_imm_1(_, _, _) -> no. + +gen_dec_prim(Erule, Type, BytesVar) -> + case gen_dec_imm(Erule, Type) of + no -> + gen_dec_prim_1(Erule, Type, BytesVar); + Imm -> + asn1ct_imm:dec_code_gen(Imm, BytesVar) + end. -gen_dec_prim(Erules,Att,BytesVar) -> - Typename = Att#type.def, - Constraint = Att#type.constraint, +gen_dec_prim_1(Erule, + #type{def=Typename,constraint=Constraint}=Att, + BytesVar) -> case Typename of - 'INTEGER' -> - emit({"?RT_PER:decode_integer(",BytesVar,",", - {asis,effective_constraint(integer,Constraint)},")"}); - {'INTEGER',NamedNumberList} -> - emit({"?RT_PER:decode_integer(",BytesVar,",", - {asis,effective_constraint(integer,Constraint)},",", - {asis,NamedNumberList},")"}); - 'REAL' -> emit({"?RT_PER:decode_real(",BytesVar,")"}); @@ -1256,8 +1192,7 @@ gen_dec_prim(Erules,Att,BytesVar) -> {asis,NamedNumberList},")"}) end; 'NULL' -> - emit({"?RT_PER:decode_null(", - BytesVar,")"}); + emit({"{'NULL',",BytesVar,"}"}); 'OBJECT IDENTIFIER' -> emit({"?RT_PER:decode_object_identifier(", BytesVar,")"}); @@ -1267,24 +1202,6 @@ gen_dec_prim(Erules,Att,BytesVar) -> 'ObjectDescriptor' -> emit({"?RT_PER:decode_ObjectDescriptor(", BytesVar,")"}); - {'ENUMERATED',{NamedNumberList1,NamedNumberList2}} -> - NewTup = {list_to_tuple([X||{X,_} <- NamedNumberList1]), - list_to_tuple([X||{X,_} <- NamedNumberList2])}, - NewC = [{'ValueRange',{0,size(element(1,NewTup))-1}}], - emit({"?RT_PER:decode_enumerated(",BytesVar,",", - {asis,NewC},",", - {asis,NewTup},")"}); - {'ENUMERATED',NamedNumberList} -> - NewTup = list_to_tuple([X||{X,_} <- NamedNumberList]), - NewC = [{'ValueRange',{0,size(NewTup)-1}}], - emit({"?RT_PER:decode_enumerated(",BytesVar,",", - {asis,NewC},",", - {asis,NewTup},")"}); - 'BOOLEAN'-> - emit({"?RT_PER:decode_boolean(",BytesVar,")"}); - 'OCTET STRING' -> - emit({"?RT_PER:decode_octet_string(",BytesVar,",", - {asis,Constraint},")"}); 'NumericString' -> emit({"?RT_PER:decode_NumericString(",BytesVar,",", {asis,Constraint},")"}); @@ -1323,7 +1240,7 @@ gen_dec_prim(Erules,Att,BytesVar) -> 'UTF8String' -> emit({"?RT_PER:decode_UTF8String(",BytesVar,")"}); 'ANY' -> - case Erules of + case Erule of per -> emit(["fun() -> {XTerm,YTermXBytes} = ?RT_PER:decode_open_type(",BytesVar,",",{asis,Constraint}, "), {binary_to_list(XTerm),XBytes} end ()"]); _ -> @@ -1345,7 +1262,7 @@ gen_dec_prim(Erules,Att,BytesVar) -> emit([" {YTerm,_} = dec_",Tname,"(XTerm,mandatory),",nl]), emit([" {YTerm,XBytes} end(",BytesVar,")"]); _ -> - case Erules of + case Erule of per -> emit(["fun() -> {XTerm,XBytes} = ?RT_PER:decode_open_type(",BytesVar,", []), {binary_to_list(XTerm),XBytes} end()"]); _ -> @@ -1353,11 +1270,11 @@ gen_dec_prim(Erules,Att,BytesVar) -> end end; #'ObjectClassFieldType'{} -> - case asn1ct_gen:get_inner(Att#type.def) of + case asn1ct_gen:get_inner(Typename) of {fixedtypevaluefield,_,InnerType} -> - gen_dec_prim(Erules,InnerType,BytesVar); + gen_dec_prim(Erule, InnerType, BytesVar); T -> - gen_dec_prim(Erules,Att#type{def=T},BytesVar) + gen_dec_prim(Erule, Att#type{def=T}, BytesVar) end; Other -> exit({'cant decode' ,Other}) diff --git a/lib/asn1/src/asn1ct_gen_per_rt2ct.erl b/lib/asn1/src/asn1ct_gen_per_rt2ct.erl index 16eec92847..ecd212c3e3 100644 --- a/lib/asn1/src/asn1ct_gen_per_rt2ct.erl +++ b/lib/asn1/src/asn1ct_gen_per_rt2ct.erl @@ -176,7 +176,7 @@ gen_encode_prim(Erules,D,DoTag,Value) when is_record(D,type) -> {asis,NamedNumberList},")"}) end; 'NULL' -> - emit({"?RT_PER:encode_null(",Value,")"}); + emit("[]"); 'OBJECT IDENTIFIER' -> emit({"?RT_PER:encode_object_identifier(",Value,")"}); 'RELATIVE-OID' -> @@ -450,17 +450,6 @@ emit_enc_octet_string(_Erules,Constraint,Value) -> emit({" ?RT_PER:encode_octet_string(",{asis,C},",false,",Value,")",nl}) end. -emit_dec_octet_string(Constraint,BytesVar) -> - case get_constraint(Constraint,'SizeConstraint') of - 0 -> - emit({" {[],",BytesVar,"}",nl}); - {_,0} -> - emit({" {[],",BytesVar,"}",nl}); - C -> - emit({" ?RT_PER:decode_octet_string(",BytesVar,",", - {asis,C},",false)",nl}) - end. - emit_enc_integer_case(Value) -> case get(component_type) of {true,#'ComponentType'{prop=Prop}} -> @@ -624,23 +613,6 @@ get_constraint(C,Key) -> V end. -get_constraints(L=[{Key,_}],Key) -> - L; -get_constraints([],_) -> - []; -get_constraints(C,Key) -> - {value,L} = keysearch_allwithkey(Key,1,C,[]), - L. - -keysearch_allwithkey(Key,Ix,C,Acc) -> - case lists:keysearch(Key,Ix,C) of - false -> - {value,Acc}; - {value,T} -> - RestC = lists:delete(T,C), - keysearch_allwithkey(Key,Ix,RestC,[T|Acc]) - end. - %% effective_constraint(Type,C) %% Type = atom() %% C = [C1,...] @@ -657,69 +629,9 @@ keysearch_allwithkey(Key,Ix,C,Acc) -> effective_constraint(integer,[C={{_,_},_}|_Rest]) -> % extension [C]; %% [C|effective_constraint(integer,Rest)]; XXX what is possible ??? effective_constraint(integer,C) -> - SVs = get_constraints(C,'SingleValue'), - SV = effective_constr('SingleValue',SVs), - VRs = get_constraints(C,'ValueRange'), - VR = effective_constr('ValueRange',VRs), - CRange = greatest_common_range(SV,VR), - pre_encode(integer,CRange); + pre_encode(integer, asn1ct_imm:effective_constraint(integer, C)); effective_constraint(bitstring,C) -> - get_constraint(C,'SizeConstraint'). - -effective_constr(_,[]) -> - []; -effective_constr('SingleValue',List) -> - SVList = lists:flatten(lists:map(fun(X)->element(2,X)end,List)), - %% Sort and remove duplicates before generating SingleValue or ValueRange - %% In case of ValueRange, also check for 'MIN and 'MAX' - case lists:usort(SVList) of - [N] -> - [{'SingleValue',N}]; - L when is_list(L) -> - [{'ValueRange',{least_Lb(L),greatest_Ub(L)}}] - end; -effective_constr('ValueRange',List) -> - LBs = lists:map(fun({_,{Lb,_}})-> Lb end,List), - UBs = lists:map(fun({_,{_,Ub}})-> Ub end,List), - Lb = least_Lb(LBs), - [{'ValueRange',{Lb,lists:max(UBs)}}]. - -greatest_common_range([],VR) -> - VR; -greatest_common_range(SV,[]) -> - SV; -greatest_common_range([{_,Int}],[{_,{'MIN',Ub}}]) when is_integer(Int), - Int > Ub -> - [{'ValueRange',{'MIN',Int}}]; -greatest_common_range([{_,Int}],[{_,{Lb,Ub}}]) when is_integer(Int), - Int < Lb -> - [{'ValueRange',{Int,Ub}}]; -greatest_common_range([{_,Int}],VR=[{_,{_Lb,_Ub}}]) when is_integer(Int) -> - VR; -greatest_common_range([{_,L}],[{_,{Lb,Ub}}]) when is_list(L) -> - Min = least_Lb([Lb|L]), - Max = greatest_Ub([Ub|L]), - [{'ValueRange',{Min,Max}}]; -greatest_common_range([{_,{Lb1,Ub1}}],[{_,{Lb2,Ub2}}]) -> - Min = least_Lb([Lb1,Lb2]), - Max = greatest_Ub([Ub1,Ub2]), - [{'ValueRange',{Min,Max}}]. - - -least_Lb(L) -> - case lists:member('MIN',L) of - true -> 'MIN'; - _ -> lists:min(L) - end. - -greatest_Ub(L) -> - case lists:member('MAX',L) of - true -> 'MAX'; - _ -> lists:max(L) - end. - - - + asn1ct_imm:effective_constraint(bitstring, C). pre_encode(integer,[]) -> []; @@ -1586,17 +1498,9 @@ gen_dec_prim(Erules,Att,BytesVar) -> Constraint = Att#type.constraint, case Typename of 'INTEGER' -> - EffectiveConstr = effective_constraint(integer,Constraint), - emit_dec_integer(EffectiveConstr,BytesVar); -% emit({"?RT_PER:decode_integer(",BytesVar,",", -% {asis,EffectiveConstr},")"}); - {'INTEGER',NamedNumberList} -> - EffectiveConstr = effective_constraint(integer,Constraint), - emit_dec_integer(EffectiveConstr,BytesVar,NamedNumberList); -% emit({"?RT_PER:decode_integer(",BytesVar,",", -% {asis,EffectiveConstr},",", -% {asis,NamedNumberList},")"}); - + asn1ct_gen_per:gen_dec_prim(Erules, Att, BytesVar); + {'INTEGER',_NamedNumberList} -> + asn1ct_gen_per:gen_dec_prim(Erules, Att, BytesVar); 'REAL' -> emit(["?RT_PER:decode_real(",BytesVar,")"]); @@ -1612,8 +1516,7 @@ gen_dec_prim(Erules,Att,BytesVar) -> {asis,NamedNumberList},")"}) end; 'NULL' -> - emit({"?RT_PER:decode_null(", - BytesVar,")"}); + emit({"{'NULL',",BytesVar,"}"}); 'OBJECT IDENTIFIER' -> emit({"?RT_PER:decode_object_identifier(", BytesVar,")"}); @@ -1623,23 +1526,13 @@ gen_dec_prim(Erules,Att,BytesVar) -> 'ObjectDescriptor' -> emit({"?RT_PER:decode_ObjectDescriptor(", BytesVar,")"}); - {'ENUMERATED',{NamedNumberList1,NamedNumberList2}} -> - NewTup = {list_to_tuple([X||{X,_} <- NamedNumberList1]), - list_to_tuple([X||{X,_} <- NamedNumberList2])}, - NewC = [{'ValueRange',{0,size(element(1,NewTup))-1}}], - emit({"?RT_PER:decode_enumerated(",BytesVar,",", - {asis,NewC},",", - {asis,NewTup},")"}); - {'ENUMERATED',NamedNumberList} -> - NewNNL = [X||{X,_} <- NamedNumberList], - NewC = effective_constraint(integer, - [{'ValueRange',{0,length(NewNNL)-1}}]), - emit_dec_enumerated(BytesVar,NewC,NewNNL); + {'ENUMERATED',_} -> + asn1ct_gen_per:gen_dec_prim(Erules, Att, BytesVar); 'BOOLEAN'-> - emit({"?RT_PER:decode_boolean(",BytesVar,")"}); + asn1ct_gen_per:gen_dec_prim(Erules, Att, BytesVar); 'OCTET STRING' -> - emit_dec_octet_string(Constraint,BytesVar); + asn1ct_gen_per:gen_dec_prim(Erules, Att, BytesVar); 'NumericString' -> emit_dec_known_multiplier_string('NumericString', @@ -1716,88 +1609,6 @@ gen_dec_prim(Erules,Att,BytesVar) -> exit({'cant decode' ,Other}) end. - -emit_dec_integer(C,BytesVar,NNL) -> - asn1ct_name:new(tmpterm), - asn1ct_name:new(buffer), - Tmpterm = asn1ct_gen:mk_var(asn1ct_name:curr(tmpterm)), - Buffer = asn1ct_gen:mk_var(asn1ct_name:curr(buffer)), - emit({" begin {",{curr,tmpterm},",",{curr,buffer},"} = ",nl}), - emit_dec_integer(C,BytesVar), - emit({",",nl," case ",Tmpterm," of",nl}), - lists:map(fun({Name,Int})->emit({" ",Int," -> {",{asis,Name},",", - Buffer,"};",nl}); - (_)-> exit({error,{asn1,{"error in named number list",NNL}}}) - end, - NNL), - emit({" _ -> {",Tmpterm,",",Buffer,"}",nl}), - emit({" end",nl}), % end of case - emit(" end"). % end of begin - -emit_dec_integer([{'SingleValue',Int}],BytesVar) when is_integer(Int) -> - emit(["{",Int,",",BytesVar,"}"]); -emit_dec_integer([{_,{Lb,_Ub},_Range,{BitsOrOctets,N}}],BytesVar) -> - GetBorO = - case BitsOrOctets of - bits -> "getbits"; - _ -> "getoctets" - end, - asn1ct_name:new(tmpterm), - asn1ct_name:new(tmpremain), - emit({" begin",nl," {",{curr,tmpterm},",",{curr,tmpremain},"}=", - "?RT_PER:",GetBorO,"(",BytesVar,",",N,"),",nl}), - emit({" {",{curr,tmpterm},"+",Lb,",",{curr,tmpremain},"}",nl, - " end"}); -emit_dec_integer([{_,{'MIN',_}}],BytesVar) -> - emit({"?RT_PER:decode_unconstrained_number(",BytesVar,")"}); -emit_dec_integer([{_,{Lb,'MAX'}}],BytesVar) -> - emit({"?RT_PER:decode_semi_constrained_number(",BytesVar,",",Lb,")"}); -emit_dec_integer([{'ValueRange',VR={Lb,Ub}}],BytesVar) -> - Range = Ub-Lb+1, - emit({"?RT_PER:decode_constrained_number(",BytesVar,",", - {asis,VR},",",Range,")"}); -emit_dec_integer(C=[{Rc,_}],BytesVar) when is_tuple(Rc) -> - emit({"?RT_PER:decode_integer(",BytesVar,",",{asis,C},")"}); -emit_dec_integer(_,BytesVar) -> - emit({"?RT_PER:decode_unconstrained_number(",BytesVar,")"}). - - -emit_dec_enumerated(BytesVar,C,NamedNumberList) -> - emit_dec_enumerated_begin(),% emits a begin if component - asn1ct_name:new(tmpterm), - Tmpterm = asn1ct_gen:mk_var(asn1ct_name:curr(tmpterm)), - asn1ct_name:new(tmpremain), - Tmpremain = asn1ct_gen:mk_var(asn1ct_name:curr(tmpremain)), - emit({" {",{curr,tmpterm},",",{curr,tmpremain},"} =",nl}), - emit_dec_integer(C,BytesVar), - emit({",",nl," case ",Tmpterm," of "}), - - Cases=lists:flatten(dec_enumerated_cases(NamedNumberList,Tmpremain,0)), - emit({Cases++"_->exit({error,{asn1,{decode_enumerated,{",Tmpterm, - ",",{asis,NamedNumberList},"}}}}) end",nl}), - emit_dec_enumerated_end(). - -emit_dec_enumerated_begin() -> - case get(component_type) of - {true,_} -> - emit({" begin",nl}); - _ -> ok - end. - -emit_dec_enumerated_end() -> - case get(component_type) of - {true,_} -> - emit(" end"); - _ -> ok - end. - - -dec_enumerated_cases([Name|Rest],Tmpremain,No) -> - io_lib:format("~w->{~w,~s};",[No,Name,Tmpremain])++ - dec_enumerated_cases(Rest,Tmpremain,No+1); -dec_enumerated_cases([],_,_) -> - "". - %% For PER the ExtensionAdditionGroup notation has significance for the encoding and decoding %% the components within the ExtensionAdditionGroup is treated in a similar way as if they %% have been specified within a SEQUENCE, therefore we construct a fake sequence type here diff --git a/lib/asn1/src/asn1ct_imm.erl b/lib/asn1/src/asn1ct_imm.erl new file mode 100644 index 0000000000..34bb0b8714 --- /dev/null +++ b/lib/asn1/src/asn1ct_imm.erl @@ -0,0 +1,626 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2012. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% +%% +%% +-module(asn1ct_imm). +-export([per_dec_boolean/0,per_dec_enumerated/2,per_dec_enumerated/3, + per_dec_extension_map/1, + per_dec_integer/2,per_dec_length/3,per_dec_named_integer/3, + per_dec_octet_string/2,per_dec_open_type/1]). +-export([optimize_alignment/1,optimize_alignment/2, + dec_slim_cg/2,dec_code_gen/2]). +-export([effective_constraint/2]). +-import(asn1ct_gen, [emit/1]). + +-record(st, {var, + base}). + +dec_slim_cg(Imm0, BytesVar) -> + {Imm,_} = optimize_alignment(Imm0), + asn1ct_name:new(v), + [H|T] = atom_to_list(asn1ct_name:curr(v)) ++ "@", + VarBase = [H-($a-$A)|T], + St0 = #st{var=0,base=VarBase}, + {Res,Pre,_} = flatten(Imm, BytesVar, St0), + dcg_list_outside(Pre), + Res. + +dec_code_gen(Imm, BytesVar) -> + emit(["begin",nl]), + {Dst,DstBuf} = dec_slim_cg(Imm, BytesVar), + emit([",",nl, + "{",Dst,",",DstBuf,"}",nl, + "end"]), + ok. + +optimize_alignment(Imm) -> + opt_al(Imm, unknown). + +optimize_alignment(Imm, Al) -> + opt_al(Imm, Al). + + +per_dec_boolean() -> + {map,{get_bits,1,[1]},[{0,false},{1,true}]}. + +per_dec_enumerated(NamedList0, Aligned) -> + Constraint = [{'ValueRange',{0,length(NamedList0)-1}}], + NamedList = per_dec_enumerated_fix_list(NamedList0, [enum_error], 0), + Int = per_dec_integer(Constraint, Aligned), + {map,Int,NamedList}. + +per_dec_enumerated(BaseNamedList, NamedListExt0, Aligned) -> + Base = per_dec_enumerated(BaseNamedList, Aligned), + NamedListExt = per_dec_enumerated_fix_list(NamedListExt0, + [enum_default], 0), + Ext = {map,per_dec_normally_small_number(Aligned),NamedListExt}, + bit_case(Base, Ext). + +per_dec_extension_map(Aligned) -> + Len = {add,per_dec_normally_small_number(Aligned),1}, + {get_bits,Len,[1,bitstring]}. + +per_dec_integer(Constraint0, Aligned) -> + Constraint = effective_constraint(integer, Constraint0), + per_dec_integer_1(Constraint, Aligned). + +per_dec_length(SingleValue, _, _Aligned) when is_integer(SingleValue) -> + {value,SingleValue}; +per_dec_length({S,S}, _, _Aligned) when is_integer(S) -> + {value,S}; +per_dec_length({{_,_}=Constr,_}, AllowZero, Aligned) -> + bit_case(per_dec_length(Constr, AllowZero, Aligned), + per_dec_length(undefined, AllowZero, Aligned)); +per_dec_length({Lb,Ub}, _AllowZero, Aligned) when is_integer(Lb), + is_integer(Lb), + Ub =< 65535 -> + per_dec_constrained(Lb, Ub, Aligned); +per_dec_length({_,_}, AllowZero, Aligned) -> + decode_unconstrained_length(AllowZero, Aligned); +per_dec_length(undefined, AllowZero, Aligned) -> + decode_unconstrained_length(AllowZero, Aligned). + +per_dec_named_integer(Constraint, NamedList0, Aligned) -> + Int = per_dec_integer(Constraint, Aligned), + NamedList = [{K,V} || {V,K} <- NamedList0] ++ [integer_default], + {map,Int,NamedList}. + +per_dec_octet_string(Constraint, Aligned) -> + dec_string(Constraint, 8, Aligned). + +per_dec_open_type(Aligned) -> + {get_bits,decode_unconstrained_length(true, Aligned), + [8,binary,{align,Aligned}]}. + + +%%% +%%% Local functions. +%%% + +dec_string(Sv, U, _Aligned) when is_integer(Sv), U*Sv =< 16 -> + {get_bits,Sv,[U,binary]}; +dec_string(Sv, U, Aligned) when is_integer(Sv), Sv < 16#10000 -> + {get_bits,Sv,[U,binary,{align,Aligned}]}; +dec_string(C, U, Aligned) when is_list(C) -> + dec_string({hd(C),lists:max(C)}, U, Aligned); +dec_string({Sv,Sv}, U, Aligned) -> + dec_string(Sv, U, Aligned); +dec_string({{_,_}=C,_}, U, Aligned) -> + bit_case(dec_string(C, U, Aligned), + dec_string(no, U, Aligned)); +dec_string({Lb,Ub}, U, Aligned) when Ub < 16#10000 -> + Len = per_dec_constrained(Lb, Ub, Aligned), + {get_bits,Len,[U,binary,{align,Aligned}]}; +dec_string(_, U, Aligned) -> + Al = [{align,Aligned}], + DecRest = fun(V, Buf) -> + emit(["?RT_PER:decode_fragmented(",V,", ", + Buf,", ",U,")"]) + end, + {'case',[{test,{get_bits,1,[1|Al]},0, + {value,{get_bits, + {get_bits,7,[1]}, + [U,binary]}}}, + {test,{get_bits,1,[1|Al]},1, + {test,{get_bits,1,[1]},0, + {value,{get_bits, + {get_bits,14,[1]}, + [U,binary]}}}}, + {test,{get_bits,1,[1|Al]},1, + {test,{get_bits,1,[1]},1, + {value,{call,DecRest,{get_bits,6,[1]}}}}}]}. + +per_dec_enumerated_fix_list([{V,_}|T], Tail, N) -> + [{N,V}|per_dec_enumerated_fix_list(T, Tail, N+1)]; +per_dec_enumerated_fix_list([], Tail, _) -> Tail. + +per_dec_integer_1([{'SingleValue',Value}], _Aligned) -> + {value,Value}; +per_dec_integer_1([{'ValueRange',{Lb,'MAX'}}], Aligned) when is_integer(Lb) -> + per_dec_unconstrained(Aligned); +per_dec_integer_1([{'ValueRange',{Lb,Ub}}], Aligned) when is_integer(Lb), + is_integer(Ub) -> + per_dec_constrained(Lb, Ub, Aligned); +per_dec_integer_1([{{_,_}=Constr0,_}], Aligned) -> + Constr = effective_constraint(integer, [Constr0]), + bit_case(per_dec_integer(Constr, Aligned), + per_dec_unconstrained(Aligned)); +per_dec_integer_1([], Aligned) -> + per_dec_unconstrained(Aligned). + +per_dec_unconstrained(Aligned) -> + {get_bits,decode_unconstrained_length(false, Aligned),[8,signed]}. + +per_dec_constrained(Lb, Ub, false) -> + Range = Ub - Lb + 1, + Get = {get_bits,uper_num_bits(Range),[1]}, + add_lb(Lb, Get); +per_dec_constrained(Lb, Ub, true) -> + Range = Ub - Lb + 1, + Get = if + Range =< 255 -> + {get_bits,per_num_bits(Range),[1,unsigned]}; + Range == 256 -> + {get_bits,1,[8,unsigned,{align,true}]}; + Range =< 65536 -> + {get_bits,2,[8,unsigned,{align,true}]}; + true -> + RangeOctLen = byte_size(binary:encode_unsigned(Range - 1)), + {get_bits,per_dec_length({1,RangeOctLen}, false, true), + [8,unsigned,{align,true}]} + end, + add_lb(Lb, Get). + +add_lb(0, Get) -> Get; +add_lb(Lb, Get) -> {add,Get,Lb}. + +per_dec_normally_small_number(Aligned) -> + Small = {get_bits,6,[1]}, + Unlimited = per_decode_semi_constrained(0, Aligned), + bit_case(Small, Unlimited). + +per_decode_semi_constrained(Lb, Aligned) -> + add_lb(Lb, {get_bits,decode_unconstrained_length(false, Aligned),[8]}). + +bit_case(Base, Ext) -> + {'case',[{test,{get_bits,1,[1]},0,Base}, + {test,{get_bits,1,[1]},1,Ext}]}. + +decode_unconstrained_length(AllowZero, Aligned) -> + Al = [{align,Aligned}], + Zero = case AllowZero of + false -> [non_zero]; + true -> [] + end, + {'case',[{test,{get_bits,1,[1|Al]},0, + {value,{get_bits,7,[1|Zero]}}}, + {test,{get_bits,1,[1|Al]},1, + {test,{get_bits,1,[1]},0, + {value,{get_bits,14,[1|Zero]}}}}]}. + +uper_num_bits(N) -> + uper_num_bits(N, 1, 0). + +uper_num_bits(N, T, B) when N =< T -> B; +uper_num_bits(N, T, B) -> uper_num_bits(N, T bsl 1, B+1). + +per_num_bits(2) -> 1; +per_num_bits(N) when N =< 4 -> 2; +per_num_bits(N) when N =< 8 -> 3; +per_num_bits(N) when N =< 16 -> 4; +per_num_bits(N) when N =< 32 -> 5; +per_num_bits(N) when N =< 64 -> 6; +per_num_bits(N) when N =< 128 -> 7; +per_num_bits(N) when N =< 255 -> 8. + +%%% +%%% Remove unnecessary aligning to octet boundaries. +%%% + +opt_al({get_bits,E0,Opts0}, A0) -> + {E,A1} = opt_al(E0, A0), + Opts = opt_al_1(A1, Opts0), + A = update_al(A1, E, Opts), + {{get_bits,E,Opts},A}; +opt_al({call,Fun,E0}, A0) -> + {E,A} = opt_al(E0, A0), + {{call,Fun,E},A}; +opt_al({convert,Op,E0}, A0) -> + {E,A} = opt_al(E0, A0), + {{convert,Op,E},A}; +opt_al({value,E0}, A0) -> + {E,A} = opt_al(E0, A0), + {{value,E},A}; +opt_al({add,E0,I}, A0) when is_integer(I) -> + {E,A} = opt_al(E0, A0), + {{add,E,I},A}; +opt_al({test,E0,V,B0}, A0) -> + {E,A1} = opt_al(E0, A0), + {B,A2} = opt_al(B0, A1), + {{test,E,V,B},A2}; +opt_al({'case',Cs0}, A0) -> + {Cs,A} = opt_al_cs(Cs0, A0), + {{'case',Cs},A}; +opt_al({map,E0,Cs}, A0) -> + {E,A} = opt_al(E0, A0), + {{map,E,Cs},A}; +opt_al(I, A) when is_integer(I) -> + {I,A}. + +opt_al_cs([C0|Cs0], A0) -> + {C,A1} = opt_al(C0, A0), + {Cs,A2} = opt_al_cs(Cs0, A0), + {[C|Cs],merge_al(A1, A2)}; +opt_al_cs([], _) -> {[],none}. + +merge_al(unknown, _) -> unknown; +merge_al(Other, none) -> Other; +merge_al(_, unknown) -> unknown; +merge_al(I0, I1) -> + case {I0 rem 8,I1 rem 8} of + {I,I} -> I; + {_,_} -> unknown + end. + +opt_al_1(unknown, Opts) -> + Opts; +opt_al_1(A, Opts0) -> + case alignment(Opts0) of + none -> + Opts0; + full -> + case A rem 8 of + 0 -> + %% Already in alignment. + proplists:delete(align, Opts0); + Bits -> + %% Cheaper alignment with a constant padding. + Opts1 = proplists:delete(align, Opts0), + [{align,8-Bits }|Opts1] + end; + A -> %Assertion. + Opts0 + end. + +update_al(A0, E, Opts) -> + A = case alignment(Opts) of + none -> A0; + full -> 0; + Bits when is_integer(A0) -> + 0 = (A0 + Bits) rem 8; %Assertion. + _ -> + 0 + end, + [U] = [U || U <- Opts, is_integer(U)], + if + U rem 8 =:= 0 -> A; + is_integer(A), is_integer(E) -> A + U*E; + true -> unknown + end. + +%%% +%%% Flatten the intermediate format and assign temporaries. +%%% + +flatten({get_bits,I,U}, Buf0, St0) when is_integer(I) -> + {Dst,St} = new_var_pair(St0), + Gb = {get_bits,{I,Buf0},U,Dst}, + flatten_align(Gb, [], St); +flatten({get_bits,E0,U}, Buf0, St0) -> + {E,Pre,St1} = flatten(E0, Buf0, St0), + {Dst,St2} = new_var_pair(St1), + Gb = {get_bits,E,U,Dst}, + flatten_align(Gb, Pre, St2); +flatten({test,{get_bits,I,U},V,E0}, Buf0, St0) when is_integer(I) -> + {DstBuf0,St1} = new_var("Buf", St0), + Gb = {get_bits,{I,Buf0},U,{V,DstBuf0}}, + {{_Dst,DstBuf},Pre0,St2} = flatten_align(Gb, [], St1), + {E,Pre1,St3} = flatten(E0, DstBuf, St2), + {E,Pre0++Pre1,St3}; +flatten({add,E0,I}, Buf0, St0) -> + {{Src,Buf},Pre,St1} = flatten(E0, Buf0, St0), + {Dst,St} = new_var("Add", St1), + {{Dst,Buf},Pre++[{add,Src,I,Dst}],St}; +flatten({'case',Cs0}, Buf0, St0) -> + {Dst,St1} = new_var_pair(St0), + {Cs1,St} = flatten_cs(Cs0, Buf0, St1), + {Al,Cs2} = flatten_hoist_align(Cs1), + {Dst,Al++[{'case',Buf0,Cs2,Dst}],St}; +flatten({map,E0,Cs0}, Buf0, St0) -> + {{E,DstBuf},Pre,St1} = flatten(E0, Buf0, St0), + {Dst,St2} = new_var("Int", St1), + Cs = flatten_map_cs(Cs0, E), + {{Dst,DstBuf},Pre++[{'map',E,Cs,{Dst,DstBuf}}],St2}; +flatten({value,V0}, Buf0, St0) when is_integer(V0) -> + {{V0,Buf0},[],St0}; +flatten({value,V0}, Buf0, St0) -> + flatten(V0, Buf0, St0); +flatten({convert,Op,E0}, Buf0, St0) -> + {{E,Buf},Pre,St1} = flatten(E0, Buf0, St0), + {Dst,St2} = new_var("Conv", St1), + {{Dst,Buf},Pre++[{convert,Op,E,Dst}],St2}; +flatten({call,Fun,E0}, Buf0, St0) -> + {Src,Pre,St1} = flatten(E0, Buf0, St0), + {Dst,St2} = new_var_pair(St1), + {Dst,Pre++[{call,Fun,Src,Dst}],St2}. + +flatten_cs([C0|Cs0], Buf, St0) -> + {C,Pre,St1} = flatten(C0, Buf, St0), + {Cs,St2} = flatten_cs(Cs0, Buf, St0), + St3 = St2#st{var=max(St1#st.var, St2#st.var)}, + {[Pre++[{return,C}]|Cs],St3}; +flatten_cs([], _, St) -> {[],St}. + +flatten_map_cs(Cs, Var) -> + flatten_map_cs_1(Cs, {Var,Cs}). + +flatten_map_cs_1([{K,V}|Cs], DefData) -> + [{{asis,K},{asis,V}}|flatten_map_cs_1(Cs, DefData)]; +flatten_map_cs_1([integer_default], {Int,_}) -> + [{'_',Int}]; +flatten_map_cs_1([enum_default], {Int,_}) -> + [{'_',["{asn1_enum,",Int,"}"]}]; +flatten_map_cs_1([enum_error], {Var,Cs}) -> + Vs = [V || {_,V} <- Cs], + [{'_',["exit({error,{asn1,{decode_enumerated,{",Var,",", + {asis,Vs},"}}}})"]}]; +flatten_map_cs_1([], _) -> []. + +flatten_hoist_align([[{align_bits,_,_}=Ab|T]|Cs]) -> + flatten_hoist_align_1(Cs, Ab, [T]); +flatten_hoist_align(Cs) -> {[],Cs}. + +flatten_hoist_align_1([[Ab|T]|Cs], Ab, Acc) -> + flatten_hoist_align_1(Cs, Ab, [T|Acc]); +flatten_hoist_align_1([], Ab, Acc) -> + {[Ab],lists:reverse(Acc)}. + +flatten_align({get_bits,{SrcBits,SrcBuf},U,Dst}=Gb0, Pre, St0) -> + case alignment(U) of + none -> + flatten_align_1(U, Dst, Pre++[Gb0], St0); + full -> + {PadBits,St1} = new_var("Pad", St0), + {DstBuf,St2} = new_var("Buf", St1), + Ab = {align_bits,SrcBuf,PadBits}, + Agb = {get_bits,{PadBits,SrcBuf},[1],{'_',DstBuf}}, + Gb = {get_bits,{SrcBits,DstBuf},U,Dst}, + flatten_align_1(U, Dst, Pre++[Ab,Agb,Gb], St2); + PadBits when is_integer(PadBits), PadBits > 0 -> + {DstBuf,St1} = new_var("Buf", St0), + Agb = {get_bits,{PadBits,SrcBuf},[1],{'_',DstBuf}}, + Gb = {get_bits,{SrcBits,DstBuf},U,Dst}, + flatten_align_1(U, Dst, Pre++[Agb,Gb], St1) + end. + +flatten_align_1(U, {D,_}=Dst, Pre, St) -> + case is_non_zero(U) of + false -> + {Dst,Pre,St}; + true -> + {Dst,Pre++[{non_zero,D}],St} + end. + +new_var_pair(St0) -> + {Var,St1} = new_var("V", St0), + {Buf,St2} = new_var("Buf", St1), + {{Var,Buf},St2}. + +new_var(Tag, #st{base=VarBase,var=N}=St) -> + {VarBase++Tag++integer_to_list(N),St#st{var=N+1}}. + +alignment([{align,false}|_]) -> none; +alignment([{align,true}|_]) -> full; +alignment([{align,Bits}|_]) -> Bits; +alignment([_|T]) -> alignment(T); +alignment([]) -> none. + +is_non_zero(Fl) -> + lists:member(non_zero, Fl). + +%%% +%%% Generate Erlang code from the flattened intermediate format. +%%% + +dcg_list_outside([{align_bits,Buf,SzVar}|T]) -> + emit([SzVar," = bit_size(",Buf,") band 7"]), + iter_dcg_list_outside(T); +dcg_list_outside([{'case',Buf,Cs,Dst}|T]) -> + dcg_case(Buf, Cs, Dst), + iter_dcg_list_outside(T); +dcg_list_outside([{'map',Val,Cs,Dst}|T]) -> + dcg_map(Val, Cs, Dst), + iter_dcg_list_outside(T); +dcg_list_outside([{add,S1,S2,Dst}|T]) -> + emit([Dst," = ",S1," + ",S2]), + iter_dcg_list_outside(T); +dcg_list_outside([{return,{V,Buf}}|T]) -> + emit(["{",V,",",Buf,"}"]), + iter_dcg_list_outside(T); +dcg_list_outside([{call,Fun,{V,Buf},{Dst,DstBuf}}|T]) -> + emit(["{",Dst,",",DstBuf,"} = "]), + Fun(V, Buf), + iter_dcg_list_outside(T); +dcg_list_outside([{convert,Op,V,Dst}|T]) -> + emit([Dst," = ",Op,"(",V,")"]), + iter_dcg_list_outside(T); +dcg_list_outside([{get_bits,{_,Buf0},_,_}|_]=L0) -> + emit("<<"), + {L,Buf} = dcg_list_inside(L0, buf), + emit([Buf,"/bitstring>> = ",Buf0]), + iter_dcg_list_outside(L); +dcg_list_outside([]) -> + emit("ignore"), + ok. + +iter_dcg_list_outside([_|_]=T) -> + emit([",",nl]), + dcg_list_outside(T); +iter_dcg_list_outside([]) -> ok. + +dcg_case(Buf, Cs, {Dst,DstBuf}) -> + emit(["{",Dst,",",DstBuf,"} = case ",Buf," of",nl]), + dcg_case_cs(Cs), + emit("end"). + +dcg_case_cs([C|Cs]) -> + emit("<<"), + {T0,DstBuf} = dcg_list_inside(C, buf), + emit([DstBuf,"/bitstring>>"]), + T1 = dcg_guard(T0), + dcg_list_outside(T1), + case Cs of + [] -> emit([nl]); + [_|_] -> emit([";",nl]) + end, + dcg_case_cs(Cs); +dcg_case_cs([]) -> ok. + +dcg_guard([{non_zero,Src}|T]) -> + emit([" when ",Src," =/= 0 ->",nl]), + T; +dcg_guard(T) -> + emit([" ->",nl]), + T. + +dcg_map(Val, Cs, {Dst,_}) -> + emit([Dst," = case ",Val," of",nl]), + dcg_map_cs(Cs), + emit("end"). + +dcg_map_cs([{K,V}]) -> + emit([K," -> ",V,nl]); +dcg_map_cs([{K,V}|Cs]) -> + emit([K," -> ",V,";",nl]), + dcg_map_cs(Cs). + +dcg_list_inside([{get_bits,{Sz,_},Fl0,{Dst,DstBuf}}|T], _) -> + Fl = bit_flags(Fl0, []), + emit([mk_dest(Dst),":",Sz,Fl,","]), + dcg_list_inside(T, DstBuf); +dcg_list_inside(L, Dst) -> {L,Dst}. + +bit_flags([1|T], Acc) -> + bit_flags(T, Acc); +bit_flags([{align,_}|T], Acc) -> + bit_flags(T, Acc); +bit_flags([non_zero|T], Acc) -> + bit_flags(T, Acc); +bit_flags([U|T], Acc) when is_integer(U) -> + bit_flags(T, ["unit:"++integer_to_list(U)|Acc]); +bit_flags([H|T], Acc) -> + bit_flags(T, [atom_to_list(H)|Acc]); +bit_flags([], []) -> + ""; +bit_flags([], Acc) -> + "/" ++ bit_flags_1(Acc, ""). + +bit_flags_1([H|T], Sep) -> + Sep ++ H ++ bit_flags_1(T, "-"); +bit_flags_1([], _) -> []. + +mk_dest(I) when is_integer(I) -> + integer_to_list(I); +mk_dest(S) -> S. + +%% effective_constraint(Type,C) +%% Type = atom() +%% C = [C1,...] +%% C1 = {'SingleValue',SV} | {'ValueRange',VR} | {atom(),term()} +%% SV = integer() | [integer(),...] +%% VR = {Lb,Ub} +%% Lb = 'MIN' | integer() +%% Ub = 'MAX' | integer() +%% Returns a single value if C only has a single value constraint, and no +%% value range constraints, that constrains to a single value, otherwise +%% returns a value range that has the lower bound set to the lowest value +%% of all single values and lower bound values in C and the upper bound to +%% the greatest value. +effective_constraint(integer,[C={{_,_},_}|_Rest]) -> % extension + [C]; +effective_constraint(integer, C) -> + SVs = get_constraints(C, 'SingleValue'), + SV = effective_constr('SingleValue', SVs), + VRs = get_constraints(C, 'ValueRange'), + VR = effective_constr('ValueRange', VRs), + greatest_common_range(SV, VR); +effective_constraint(bitstring, C) -> + get_constraint(C, 'SizeConstraint'). + +effective_constr(_, []) -> []; +effective_constr('SingleValue', List) -> + SVList = lists:flatten(lists:map(fun(X) -> element(2, X) end, List)), + %% Sort and remove duplicates before generating SingleValue or ValueRange + %% In case of ValueRange, also check for 'MIN and 'MAX' + case lists:usort(SVList) of + [N] -> + [{'SingleValue',N}]; + [_|_]=L -> + [{'ValueRange',{least_Lb(L),greatest_Ub(L)}}] + end; +effective_constr('ValueRange', List) -> + LBs = lists:map(fun({_,{Lb,_}}) -> Lb end, List), + UBs = lists:map(fun({_,{_,Ub}}) -> Ub end, List), + Lb = least_Lb(LBs), + [{'ValueRange',{Lb,lists:max(UBs)}}]. + +greatest_common_range([], VR) -> + VR; +greatest_common_range(SV, []) -> + SV; +greatest_common_range([{_,Int}], [{_,{'MIN',Ub}}]) + when is_integer(Int), Int > Ub -> + [{'ValueRange',{'MIN',Int}}]; +greatest_common_range([{_,Int}],[{_,{Lb,Ub}}]) + when is_integer(Int), Int < Lb -> + [{'ValueRange',{Int,Ub}}]; +greatest_common_range([{_,Int}],VR=[{_,{_Lb,_Ub}}]) when is_integer(Int) -> + VR; +greatest_common_range([{_,L}],[{_,{Lb,Ub}}]) when is_list(L) -> + Min = least_Lb([Lb|L]), + Max = greatest_Ub([Ub|L]), + [{'ValueRange',{Min,Max}}]; +greatest_common_range([{_,{Lb1,Ub1}}], [{_,{Lb2,Ub2}}]) -> + Min = least_Lb([Lb1,Lb2]), + Max = greatest_Ub([Ub1,Ub2]), + [{'ValueRange',{Min,Max}}]. + + +least_Lb(L) -> + case lists:member('MIN', L) of + true -> 'MIN'; + false -> lists:min(L) + end. + +greatest_Ub(L) -> + case lists:member('MAX', L) of + true -> 'MAX'; + false -> lists:max(L) + end. + +get_constraint(C, Key) -> + case lists:keyfind(Key, 1, C) of + false -> no; + {_,V} -> V + end. + +get_constraints([{Key,_}=Pair|T], Key) -> + [Pair|get_constraints(T, Key)]; +get_constraints([_|T], Key) -> + get_constraints(T, Key); +get_constraints([], _) -> []. diff --git a/lib/asn1/src/asn1ct_value.erl b/lib/asn1/src/asn1ct_value.erl index 9013baef92..389642c446 100644 --- a/lib/asn1/src/asn1ct_value.erl +++ b/lib/asn1/src/asn1ct_value.erl @@ -54,7 +54,7 @@ from_type(M,Typename,Type) when is_record(Type,type) -> {notype,_} -> true; {primitive,bif} -> - from_type_prim(Type,get_encoding_rule(M)); + from_type_prim(Type); 'ASN1_OPEN_TYPE' -> case Type#type.constraint of [#'Externaltypereference'{type=TrefConstraint}] -> @@ -164,7 +164,7 @@ gen_list(_,_,_,0) -> gen_list(M,Typename,Oftype,N) -> [from_type(M,Typename,Oftype)|gen_list(M,Typename,Oftype,N-1)]. -from_type_prim(D,Erule) -> +from_type_prim(D) -> C = D#type.constraint, case D#type.def of 'INTEGER' -> @@ -303,12 +303,7 @@ from_type_prim(D,Erule) -> adjust_list(size_random(C),c_string(C,"BMPString")); 'UTF8String' -> {ok,Res}=asn1rt:utf8_list_to_binary(adjust_list(random(50),[$U,$T,$F,$8,$S,$t,$r,$i,$n,$g,16#ffff,16#fffffff,16#ffffff,16#fffff,16#fff])), - case Erule of - per -> - binary_to_list(Res); - _ -> - Res - end; + Res; 'UniversalString' -> adjust_list(size_random(C),c_string(C,"UniversalString")); XX -> @@ -440,20 +435,9 @@ get_encoding_rule(M) -> end. open_type_value(ber) -> - [4,9,111,112,101,110,95,116,121,112,101]; -open_type_value(ber_bin) -> -% [4,9,111,112,101,110,95,116,121,112,101]; - <<4,9,111,112,101,110,95,116,121,112,101>>; -open_type_value(ber_bin_v2) -> -% [4,9,111,112,101,110,95,116,121,112,101]; <<4,9,111,112,101,110,95,116,121,112,101>>; -open_type_value(per) -> - "\n\topen_type"; %octet string value "open_type" -open_type_value(per_bin) -> - <<"\n\topen_type">>; -% <<10,9,111,112,101,110,95,116,121,112,101>>; open_type_value(_) -> - [4,9,111,112,101,110,95,116,121,112,101]. + <<"\n\topen_type">>. %octet string value "open_type" to_textual_order({Root,Ext}) -> {to_textual_order(Root),Ext}; diff --git a/lib/asn1/src/asn1rt_ber_bin.erl b/lib/asn1/src/asn1rt_ber_bin.erl index 22f9f2ecfd..ec1549804b 100644 --- a/lib/asn1/src/asn1rt_ber_bin.erl +++ b/lib/asn1/src/asn1rt_ber_bin.erl @@ -19,337 +19,30 @@ %% -module(asn1rt_ber_bin). -%% encoding / decoding of BER - --export([decode/1]). --export([fixoptionals/2,split_list/2,cindex/3,restbytes2/3, - list_to_record/2, - encode_tag_val/1,decode_tag/1,peek_tag/1, - check_tags/3, encode_tags/3]). --export([encode_boolean/2,decode_boolean/3, - encode_integer/3,encode_integer/4, - decode_integer/4,decode_integer/5,encode_enumerated/2, - encode_enumerated/4,decode_enumerated/5, +-export([decode_length/1, encode_real/2, encode_real/3, decode_real/2, decode_real/4, - encode_bit_string/4,decode_bit_string/6, - decode_compact_bit_string/6, - encode_octet_string/3,decode_octet_string/5, - encode_null/2,decode_null/3, - encode_object_identifier/2,decode_object_identifier/3, - encode_relative_oid/2,decode_relative_oid/3, - encode_restricted_string/4,decode_restricted_string/6, - encode_universal_string/3,decode_universal_string/5, - encode_UTF8_string/3, decode_UTF8_string/3, - encode_BMP_string/3,decode_BMP_string/5, - encode_generalized_time/3,decode_generalized_time/5, - encode_utc_time/3,decode_utc_time/5, - encode_length/1,decode_length/1, - check_if_valid_tag/3, - decode_tag_and_length/1, decode_components/6, - decode_components/7, decode_set/6]). - --export([encode_open_type/1,encode_open_type/2,decode_open_type/1,decode_open_type/2,decode_open_type/3]). --export([skipvalue/1, skipvalue/2,skip_ExtensionAdditions/2]). + decode_tag/1]). -include("asn1_records.hrl"). -% the encoding of class of tag bits 8 and 7 +%% the encoding of class of tag bits 8 and 7 -define(UNIVERSAL, 0). --define(APPLICATION, 16#40). --define(CONTEXT, 16#80). --define(PRIVATE, 16#C0). %%% primitive or constructed encoding % bit 6 -define(PRIMITIVE, 0). -define(CONSTRUCTED, 2#00100000). %%% The tag-number for universal types --define(N_BOOLEAN, 1). --define(N_INTEGER, 2). --define(N_BIT_STRING, 3). --define(N_OCTET_STRING, 4). --define(N_NULL, 5). --define(N_OBJECT_IDENTIFIER, 6). --define(N_OBJECT_DESCRIPTOR, 7). --define(N_EXTERNAL, 8). -define(N_REAL, 9). --define(N_ENUMERATED, 10). --define(N_EMBEDDED_PDV, 11). --define(N_UTF8String, 12). --define('N_RELATIVE-OID',13). --define(N_SEQUENCE, 16). --define(N_SET, 17). --define(N_NumericString, 18). --define(N_PrintableString, 19). --define(N_TeletexString, 20). --define(N_VideotexString, 21). --define(N_IA5String, 22). --define(N_UTCTime, 23). --define(N_GeneralizedTime, 24). --define(N_GraphicString, 25). --define(N_VisibleString, 26). --define(N_GeneralString, 27). --define(N_UniversalString, 28). --define(N_BMPString, 30). - - -% the complete tag-word of built-in types --define(T_BOOLEAN, ?UNIVERSAL bor ?PRIMITIVE bor 1). --define(T_INTEGER, ?UNIVERSAL bor ?PRIMITIVE bor 2). --define(T_BIT_STRING, ?UNIVERSAL bor ?PRIMITIVE bor 3). % can be CONSTRUCTED --define(T_OCTET_STRING, ?UNIVERSAL bor ?PRIMITIVE bor 4). % can be CONSTRUCTED --define(T_NULL, ?UNIVERSAL bor ?PRIMITIVE bor 5). --define(T_OBJECT_IDENTIFIER,?UNIVERSAL bor ?PRIMITIVE bor 6). --define(T_OBJECT_DESCRIPTOR,?UNIVERSAL bor ?PRIMITIVE bor 7). --define(T_EXTERNAL, ?UNIVERSAL bor ?PRIMITIVE bor 8). --define(T_REAL, ?UNIVERSAL bor ?PRIMITIVE bor 9). --define(T_ENUMERATED, ?UNIVERSAL bor ?PRIMITIVE bor 10). --define(T_EMBEDDED_PDV, ?UNIVERSAL bor ?PRIMITIVE bor 11). --define(T_SEQUENCE, ?UNIVERSAL bor ?CONSTRUCTED bor 16). --define(T_SET, ?UNIVERSAL bor ?CONSTRUCTED bor 17). --define(T_NumericString, ?UNIVERSAL bor ?PRIMITIVE bor 18). %can be constructed --define(T_PrintableString, ?UNIVERSAL bor ?PRIMITIVE bor 19). %can be constructed --define(T_TeletexString, ?UNIVERSAL bor ?PRIMITIVE bor 20). %can be constructed --define(T_VideotexString, ?UNIVERSAL bor ?PRIMITIVE bor 21). %can be constructed --define(T_IA5String, ?UNIVERSAL bor ?PRIMITIVE bor 22). %can be constructed --define(T_UTCTime, ?UNIVERSAL bor ?PRIMITIVE bor 23). --define(T_GeneralizedTime, ?UNIVERSAL bor ?PRIMITIVE bor 24). --define(T_GraphicString, ?UNIVERSAL bor ?PRIMITIVE bor 25). %can be constructed --define(T_VisibleString, ?UNIVERSAL bor ?PRIMITIVE bor 26). %can be constructed --define(T_GeneralString, ?UNIVERSAL bor ?PRIMITIVE bor 27). %can be constructed --define(T_UniversalString, ?UNIVERSAL bor ?PRIMITIVE bor 28). %can be constructed --define(T_BMPString, ?UNIVERSAL bor ?PRIMITIVE bor 30). %can be constructed - - -decode(Bin) -> - decode_primitive(Bin). - -decode_primitive(Bin) -> - {Tlv = {Tag,Len,V},<<>>} = decode_tlv(Bin), - case element(2,Tag) of - ?CONSTRUCTED -> - {Tag,Len,decode_constructed(V)}; - _ -> - Tlv - end. - -decode_constructed(<<>>) -> - []; -decode_constructed(Bin) -> - {Tlv = {Tag,Len,V},Rest} = decode_tlv(Bin), - NewTlv = - case element(2,Tag) of - ?CONSTRUCTED -> - {Tag,Len,decode_constructed(V)}; - _ -> - Tlv - end, - [NewTlv|decode_constructed(Rest)]. - -decode_tlv(Bin) -> - {Tag,Bin1,_Rb1} = decode_tag(Bin), - {{Len,Bin2},_Rb2} = decode_length(Bin1), - <<V:Len/binary,Bin3/binary>> = Bin2, - {{Tag,Len,V},Bin3}. - - - -%%%%%%%%%%%%% -% split_list(List,HeadLen) -> {HeadList,TailList} -% -% splits List into HeadList (Length=HeadLen) and TailList -% if HeadLen == indefinite -> return {List,indefinite} -split_list(List,indefinite) -> - {List, indefinite}; -split_list(Bin, Len) when is_binary(Bin) -> - split_binary(Bin,Len); -split_list(List,Len) -> - {lists:sublist(List,Len),lists:nthtail(Len,List)}. - -%%% new function which fixes a bug regarding indefinite length decoding -restbytes2(indefinite,<<0,0,RemBytes/binary>>,_) -> - {RemBytes,2}; -restbytes2(indefinite,RemBytes,ext) -> - skipvalue(indefinite,RemBytes); -restbytes2(RemBytes,<<>>,_) -> - {RemBytes,0}; -restbytes2(_RemBytes,Bytes,noext) -> - exit({error,{asn1, {unexpected,Bytes}}}); -restbytes2(RemBytes,Bytes,ext) -> -%% {RemBytes,0}. - {RemBytes,byte_size(Bytes)}. - - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% skipvalue(Length, Bytes) -> {RemainingBytes, RemovedNumberOfBytes} -%% -%% skips the one complete (could be nested) TLV from Bytes -%% handles both definite and indefinite length encodings -%% - -skipvalue(L, Bytes) -> - skipvalue(L, Bytes, 0). - -skipvalue(L, Bytes, Rb) -> - skipvalue(L, Bytes, Rb, 0). - -skipvalue(indefinite, Bytes, Rb, IndefLevel) -> - {T,Bytes2,R2} = decode_tag(Bytes), - {{L,Bytes3},R3} = decode_length(Bytes2), - case {T,L} of - {_,indefinite} -> - skipvalue(indefinite,Bytes3,Rb+R2+R3,IndefLevel+1); - {{0,0,0},0} when IndefLevel =:= 0 -> - %% See X690 8.1.5 NOTE, end of indefinite content - {Bytes3,Rb+2}; - {{0,0,0},0} -> - skipvalue(indefinite,Bytes3,Rb+2,IndefLevel - 1); - _ -> - <<_:L/binary, RestBytes/binary>> = Bytes3, - skipvalue(indefinite,RestBytes,Rb+R2+R3+L, IndefLevel) - %%{RestBytes, R2+R3+L} - end; -%% case Bytes4 of -%% <<0,0,Bytes5/binary>> -> -%% {Bytes5,Rb+Rb4+2}; -%% _ -> skipvalue(indefinite,Bytes4,Rb+Rb4) -%% end; -skipvalue(L, Bytes, Rb, _) -> -% <<Skip:L/binary, RestBytes/binary>> = Bytes, - <<_:L/binary, RestBytes/binary>> = Bytes, - {RestBytes,Rb+L}. - - -skipvalue(Bytes) -> - {_T,Bytes2,R2} = decode_tag(Bytes), - {{L,Bytes3},R3} = decode_length(Bytes2), - skipvalue(L,Bytes3,R2+R3). - - -cindex(Ix,Val,Cname) -> - case element(Ix,Val) of - {Cname,Val2} -> Val2; - X -> X - end. - -%%% -%% skips byte sequence of Bytes that do not match a tag in Tags -skip_ExtensionAdditions(Bytes,Tags) -> - skip_ExtensionAdditions(Bytes,Tags,0). -skip_ExtensionAdditions(<<>>,_Tags,RmB) -> - {<<>>,RmB}; -skip_ExtensionAdditions(Bytes,Tags,RmB) -> - case catch decode_tag(Bytes) of - {'EXIT',_Reason} -> - tag_error(no_data,Tags,Bytes,'OPTIONAL'); - {_T={Class,_Form,TagNo},_Bytes2,_R2} -> - case [X||X=#tag{class=Cl,number=TN} <- Tags,Cl==Class,TN==TagNo] of - [] -> - %% skip this TLV and continue with next - {Bytes3,R3} = skipvalue(Bytes), - skip_ExtensionAdditions(Bytes3,Tags,RmB+R3); - _ -> - {Bytes,RmB} - end - end. - -%%=============================================================================== -%%=============================================================================== -%%=============================================================================== -%% Optionals, preset not filled optionals with asn1_NOVALUE -%%=============================================================================== -%%=============================================================================== -%%=============================================================================== - -% converts a list to a record if necessary -list_to_record(Name,List) when is_list(List) -> - list_to_tuple([Name|List]); -list_to_record(_Name,Tuple) when is_tuple(Tuple) -> - Tuple. - - -fixoptionals(OptList,Val) when is_list(Val) -> - fixoptionals(OptList,Val,1,[],[]). - -fixoptionals([{Name,Pos}|Ot],[{Name,Val}|Vt],_Opt,Acc1,Acc2) -> - fixoptionals(Ot,Vt,Pos+1,[1|Acc1],[{Name,Val}|Acc2]); -fixoptionals([{_Name,Pos}|Ot],V,Pos,Acc1,Acc2) -> - fixoptionals(Ot,V,Pos+1,[0|Acc1],[asn1_NOVALUE|Acc2]); -fixoptionals(O,[Vh|Vt],Pos,Acc1,Acc2) -> - fixoptionals(O,Vt,Pos+1,Acc1,[Vh|Acc2]); -fixoptionals([],[Vh|Vt],Pos,Acc1,Acc2) -> - fixoptionals([],Vt,Pos+1,Acc1,[Vh|Acc2]); -fixoptionals([],[],_,_Acc1,Acc2) -> - % return Val as a record - list_to_tuple([asn1_RECORDNAME|lists:reverse(Acc2)]). - - -%%encode_tag(TagClass(?UNI, APP etc), Form (?PRIM etx), TagInteger) -> -%% 8bit Int | binary encode_tag_val({Class, Form, TagNo}) when (TagNo =< 30) -> <<(Class bsr 6):2,(Form bsr 5):1,TagNo:5>>; encode_tag_val({Class, Form, TagNo}) -> {Octets,_Len} = mk_object_val(TagNo), BinOct = list_to_binary(Octets), - <<(Class bsr 6):2, (Form bsr 5):1, 31:5,BinOct/binary>>; - -%% asumes whole correct tag bitpattern, multiple of 8 -encode_tag_val(Tag) when (Tag =< 255) -> Tag; %% anv�nds denna funktion??!! -%% asumes correct bitpattern of 0-5 -encode_tag_val(Tag) -> encode_tag_val2(Tag,[]). - -encode_tag_val2(Tag, OctAck) when (Tag =< 255) -> - [Tag | OctAck]; -encode_tag_val2(Tag, OctAck) -> - encode_tag_val2(Tag bsr 8, [255 band Tag | OctAck]). - - -%%%encode_tag(TagClass(?UNI, APP etc), Form (?PRIM etx), TagInteger) -> -%%% 8bit Int | [list of octets] -%encode_tag_val({Class, Form, TagNo}) when (TagNo =< 30) -> -%%% <<Class:2,Form:1,TagNo:5>>; -% [Class bor Form bor TagNo]; -%encode_tag_val({Class, Form, TagNo}) -> -% {Octets,L} = mk_object_val(TagNo), -% [Class bor Form bor 31 | Octets]; - - -%%============================================================================\%% Peek on the initial tag -%% peek_tag(Bytes) -> TagBytes -%% interprets the first byte and possible second, third and fourth byte as -%% a tag and returns all the bytes comprising the tag, the constructed/primitive bit (6:th bit of first byte) is normalised to 0 -%% - -peek_tag(<<B7_6:2,_:1,31:5,Buffer/binary>>) -> - Bin = peek_tag(Buffer, <<>>), - <<B7_6:2,31:6,Bin/binary>>; -%% single tag (tagno < 31) -peek_tag(<<B7_6:2,_:1,B4_0:5,_Buffer/binary>>) -> - <<B7_6:2,B4_0:6>>. - -peek_tag(<<0:1,PartialTag:7,_Buffer/binary>>, TagAck) -> - <<TagAck/binary,PartialTag>>; -peek_tag(<<PartialTag,Buffer/binary>>, TagAck) -> - peek_tag(Buffer,<<TagAck/binary,PartialTag>>); -peek_tag(_,TagAck) -> - exit({error,{asn1, {invalid_tag,TagAck}}}). -%%peek_tag([Tag|Buffer]) when (Tag band 31) =:= 31 -> -%% [Tag band 2#11011111 | peek_tag(Buffer,[])]; -%%%% single tag (tagno < 31) -%%peek_tag([Tag|Buffer]) -> -%% [Tag band 2#11011111]. - -%%peek_tag([PartialTag|Buffer], TagAck) when (PartialTag < 128 ) -> -%% lists:reverse([PartialTag|TagAck]); -%%peek_tag([PartialTag|Buffer], TagAck) -> -%% peek_tag(Buffer,[PartialTag|TagAck]); -%%peek_tag(Buffer,TagAck) -> -%% exit({error,{asn1, {invalid_tag,lists:reverse(TagAck)}}}). - + <<(Class bsr 6):2, (Form bsr 5):1, 31:5,BinOct/binary>>. %%=============================================================================== %% Decode a tag @@ -403,33 +96,11 @@ check_tags_i([Tag1|TagRest], Buffer, Rb, OptOrMand) -> _ -> check_tags_i(TagRest, Buffer2, Rb + Rb1, mandatory) end - end; - -check_tags_i([], Buffer, Rb, _) -> - {[],{{0,0},Buffer,Rb}}. + end. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% This function is called from generated code -check_tags([Tag], Buffer, OptOrMand) -> % optimized very usual case - check_one_tag(Tag, Buffer, OptOrMand); -check_tags(Tags, Buffer, OptOrMand) -> - check_tags(Tags, Buffer, 0, OptOrMand). - -check_tags([Tag1,Tag2|TagRest], Buffer, Rb, OptOrMand) - when Tag1#tag.type == 'IMPLICIT' -> - check_tags([Tag1#tag{type=Tag2#tag.type}|TagRest], Buffer, Rb, OptOrMand); - -check_tags([Tag1|TagRest], Buffer, Rb, OptOrMand) -> - {Form_Length,Buffer2,Rb1} = check_one_tag(Tag1, Buffer, OptOrMand), - case TagRest of - [] -> {Form_Length, Buffer2, Rb + Rb1}; - _ -> check_tags(TagRest, Buffer2, Rb + Rb1, mandatory) - end; - -check_tags([], Buffer, Rb, _) -> - {{0,0},Buffer,Rb}. - check_one_tag(Tag=#tag{class=ExpectedClass,number=ExpectedNumber}, Buffer, OptOrMand) -> case catch decode_tag(Buffer) of {'EXIT',_Reason} -> @@ -491,382 +162,6 @@ encode_one_tag(#tag{class=Class,number=No,type=Type, form = Form}) -> Bytes = encode_tag_val({Class,NewForm,No}), {Bytes,size(Bytes)}. -%%=============================================================================== -%% Change the tag (used when an implicit tagged type has a reference to something else) -%% The constructed bit in the tag is taken from the tag to be replaced. -%% -%% change_tag(NewTag,[Tag,Buffer]) -> [NewTag,Buffer] -%%=============================================================================== - -%change_tag({NewClass,NewTagNr}, Buffer) -> -% {{OldClass, OldForm, OldTagNo}, Buffer1, RemovedBytes} = decode_tag(lists:flatten(Buffer)), -% [encode_tag_val({NewClass, OldForm, NewTagNr}) | Buffer1]. - - -%%=============================================================================== -%% -%% This comment is valid for all the encode/decode functions -%% -%% C = Constraint -> typically {'ValueRange',LowerBound,UpperBound} -%% used for PER-coding but not for BER-coding. -%% -%% Val = Value. If Val is an atom then it is a symbolic integer value -%% (i.e the atom must be one of the names in the NamedNumberList). -%% The NamedNumberList is used to translate the atom to an integer value -%% before encoding. -%% -%%=============================================================================== - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% encode_open_type(Value) -> CompleteList -%% Value = list of bytes of an already encoded value (the list must be flat) -%% | binary - -%% This version does not consider Explicit tagging of the open type. It -%% is only left because of backward compatibility. -encode_open_type(Val) when is_list(Val) -> - {Val, byte_size(list_to_binary(Val))}; -encode_open_type(Val) -> - {Val, byte_size(Val)}. - -%% -encode_open_type(Val, []) when is_list(Val) -> - {Val, byte_size(list_to_binary(Val))}; -encode_open_type(Val, []) -> - {Val, byte_size(Val)}; -encode_open_type(Val, Tag) when is_list(Val) -> - encode_tags(Tag, Val, byte_size(list_to_binary(Val))); -encode_open_type(Val, Tag) -> - encode_tags(Tag, Val, byte_size(Val)). - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% decode_open_type(Buffer) -> Value -%% Bytes = [byte] with BER encoded data -%% Value = [byte] with decoded data (which must be decoded again as some type) -%% -decode_open_type(Bytes) -> -% {_Tag, Len, _RemainingBuffer, RemovedBytes} = decode_tag_and_length(Bytes), -% N = Len + RemovedBytes, - {_Tag, Len, RemainingBuffer, RemovedBytes} = decode_tag_and_length(Bytes), - {_RemainingBuffer2, RemovedBytes2} = skipvalue(Len, RemainingBuffer, RemovedBytes), - N = RemovedBytes2, - <<Val:N/binary, RemainingBytes/binary>> = Bytes, -% {Val, RemainingBytes, Len + RemovedBytes}. - {Val,RemainingBytes,N}. - -decode_open_type(<<>>,[]=ExplTag) -> % R9C-0.patch-40 - exit({error, {asn1,{no_optional_tag, ExplTag}}}); -decode_open_type(Bytes,ExplTag) -> - {Tag, Len, RemainingBuffer, RemovedBytes} = decode_tag_and_length(Bytes), - case {Tag,ExplTag} of -% {{Class,Form,32},[#tag{class=Class,number=No,form=32}]} -> -% {_Tag2, Len2, RemainingBuffer2, RemovedBytes2} = decode_tag_and_length(RemainingBuffer), -% {_RemainingBuffer3, RemovedBytes3} = skipvalue(Len2, RemainingBuffer2, RemovedBytes2), -% N = RemovedBytes3, -% <<_:RemovedBytes/unit:8,Val:N/binary,RemainingBytes/binary>> = Bytes, -% {Val, RemainingBytes, N + RemovedBytes}; - {{Class,Form,No},[#tag{class=Class,number=No,form=Form}]} -> - {_RemainingBuffer2, RemovedBytes2} = - skipvalue(Len, RemainingBuffer), - N = RemovedBytes2, - <<_:RemovedBytes/unit:8,Val:N/binary,RemainingBytes/binary>> = Bytes, - {Val, RemainingBytes, N + RemovedBytes}; - _ -> - {_RemainingBuffer2, RemovedBytes2} = - skipvalue(Len, RemainingBuffer, RemovedBytes), - N = RemovedBytes2, - <<Val:N/binary, RemainingBytes/binary>> = Bytes, - {Val, RemainingBytes, N} - end. - -decode_open_type(ber_bin,Bytes,ExplTag) -> - decode_open_type(Bytes,ExplTag); -decode_open_type(ber,Bytes,ExplTag) -> - {Val,RemBytes,Len}=decode_open_type(Bytes,ExplTag), - {binary_to_list(Val),RemBytes,Len}. - -%%=============================================================================== -%%=============================================================================== -%%=============================================================================== -%% Boolean, ITU_T X.690 Chapter 8.2 -%%=============================================================================== -%%=============================================================================== -%%=============================================================================== - -%%=============================================================================== -%% encode_boolean(Integer, tag | notag) -> [octet list] -%%=============================================================================== - -encode_boolean({Name, Val}, DoTag) when is_atom(Name) -> - dotag(DoTag, ?N_BOOLEAN, encode_boolean(Val)); -encode_boolean(true,[]) -> - {[1,1,16#FF],3}; -encode_boolean(false,[]) -> - {[1,1,0],3}; -encode_boolean(Val, DoTag) -> - dotag(DoTag, ?N_BOOLEAN, encode_boolean(Val)). - -%% encode_boolean(Boolean) -> [Len, Boolean] = [1, $FF | 0] -encode_boolean(true) -> {[16#FF],1}; -encode_boolean(false) -> {[0],1}; -encode_boolean(X) -> exit({error,{asn1, {encode_boolean, X}}}). - - -%%=============================================================================== -%% decode_boolean(BuffList, HasTag, TotalLen) -> {true, Remain, RemovedBytes} | -%% {false, Remain, RemovedBytes} -%%=============================================================================== - -decode_boolean(Buffer, Tags, OptOrMand) -> - NewTags = new_tags(Tags,#tag{class=?UNIVERSAL,number=?N_BOOLEAN}), - decode_boolean_notag(Buffer, NewTags, OptOrMand). - -decode_boolean_notag(Buffer, Tags, OptOrMand) -> - {RestTags, {FormLen,Buffer0,Rb0}} = - check_tags_i(Tags, Buffer, OptOrMand), - case FormLen of - {?CONSTRUCTED,Len} -> - {Buffer00,RestBytes} = split_list(Buffer0,Len), - {Val,Buffer1,Rb1} = decode_boolean_notag(Buffer00, RestTags, OptOrMand), - {Buffer2, Rb2} = restbytes2(RestBytes,Buffer1,noext), - {Val, Buffer2, Rb0+Rb1+Rb2}; - {_,_} -> - decode_boolean2(Buffer0, Rb0) - end. - -decode_boolean2(<<0:8, Buffer/binary>>, RemovedBytes) -> - {false, Buffer, RemovedBytes + 1}; -decode_boolean2(<<_:8, Buffer/binary>>, RemovedBytes) -> - {true, Buffer, RemovedBytes + 1}; -decode_boolean2(Buffer, _) -> - exit({error,{asn1, {decode_boolean, Buffer}}}). - - -%%=========================================================================== -%% Integer, ITU_T X.690 Chapter 8.3 - -%% encode_integer(Constraint, Value, Tag) -> [octet list] -%% encode_integer(Constraint, Name, NamedNumberList, Tag) -> [octet list] -%% Value = INTEGER | {Name,INTEGER} -%% Tag = tag | notag -%%=========================================================================== - -encode_integer(C, Val, []) when is_integer(Val) -> - {EncVal,Len} = encode_integer(C, Val), - dotag_universal(?N_INTEGER,EncVal,Len); -encode_integer(C, Val, Tag) when is_integer(Val) -> - dotag(Tag, ?N_INTEGER, encode_integer(C, Val)); -encode_integer(C,{Name,Val},Tag) when is_atom(Name) -> - encode_integer(C,Val,Tag); -encode_integer(_, Val, _) -> - exit({error,{asn1, {encode_integer, Val}}}). - - -encode_integer(C, Val, NamedNumberList, Tag) when is_atom(Val) -> - case lists:keyfind(Val, 1, NamedNumberList) of - {_, NewVal} -> - dotag(Tag, ?N_INTEGER, encode_integer(C, NewVal)); - _ -> - exit({error,{asn1, {encode_integer_namednumber, Val}}}) - end; -encode_integer(C,{_,Val},NamedNumberList,Tag) -> - encode_integer(C,Val,NamedNumberList,Tag); -encode_integer(C, Val, _NamedNumberList, Tag) -> - dotag(Tag, ?N_INTEGER, encode_integer(C, Val)). - - -encode_integer(_C, Val) -> - Bytes = - if - Val >= 0 -> - encode_integer_pos(Val, []); - true -> - encode_integer_neg(Val, []) - end, - {Bytes,length(Bytes)}. - -encode_integer_pos(0, L=[B|_Acc]) when B < 128 -> - L; -encode_integer_pos(N, Acc) -> - encode_integer_pos((N bsr 8), [N band 16#ff| Acc]). - -encode_integer_neg(-1, L=[B1|_T]) when B1 > 127 -> - L; -encode_integer_neg(N, Acc) -> - encode_integer_neg(N bsr 8, [N band 16#ff|Acc]). - -%%=============================================================================== -%% decode integer -%% (Buffer, Range, HasTag, TotalLen) -> {Integer, Remain, RemovedBytes} -%% (Buffer, Range, NamedNumberList, HasTag, TotalLen) -> {Integer, Remain, RemovedBytes} -%%=============================================================================== - -decode_integer(Buffer, Range, Tags, OptOrMand) -> - NewTags = new_tags(Tags,#tag{class=?UNIVERSAL,number=?N_INTEGER}), - decode_integer_notag(Buffer, Range, [], NewTags, OptOrMand). - -decode_integer(Buffer, Range, NamedNumberList, Tags, OptOrMand) -> - NewTags = new_tags(Tags,#tag{class=?UNIVERSAL,number=?N_INTEGER}), - decode_integer_notag(Buffer, Range, NamedNumberList, NewTags, OptOrMand). - -decode_integer_notag(Buffer, Range, NamedNumberList, NewTags, OptOrMand) -> - {RestTags, {FormLen, Buffer0, Rb0}} = - check_tags_i(NewTags, Buffer, OptOrMand), -% Result = {Val, Buffer2, RemovedBytes} = - case FormLen of - {?CONSTRUCTED,Len} -> - {Buffer00, RestBytes} = split_list(Buffer0,Len), - {Val01, Buffer01, Rb01} = - decode_integer_notag(Buffer00, Range, NamedNumberList, - RestTags, OptOrMand), - {Buffer02, Rb02} = restbytes2(RestBytes,Buffer01,noext), - {Val01, Buffer02, Rb0+Rb01+Rb02}; - {_, Len} -> - Result = - decode_integer2(Len,Buffer0,Rb0+Len), - Result2 = check_integer_constraint(Result,Range), - resolve_named_value(Result2,NamedNumberList) - end. - -resolve_named_value(Result={Val,Buffer,RemBytes},NamedNumberList) -> - case NamedNumberList of - [] -> Result; - _ -> - NewVal = case lists:keyfind(Val, 2, NamedNumberList) of - {NamedVal, _} -> - NamedVal; - _ -> - Val - end, - {NewVal, Buffer, RemBytes} - end. - -check_integer_constraint(Result={Val, _Buffer,_},Range) -> - case Range of - [] -> % No length constraint - Result; - {Lb,Ub} when Val >= Lb, Ub >= Val -> % variable length constraint - Result; - Val -> % fixed value constraint - Result; - {_,_} -> - exit({error,{asn1,{integer_range,Range,Val}}}); - SingleValue when is_integer(SingleValue) -> - exit({error,{asn1,{integer_range,Range,Val}}}); - _ -> % some strange constraint that we don't support yet - Result - end. - -%%============================================================================ -%% Enumerated value, ITU_T X.690 Chapter 8.4 - -%% encode enumerated value -%%============================================================================ -encode_enumerated(Val, []) when is_integer(Val) -> - {EncVal,Len} = encode_integer(false,Val), - dotag_universal(?N_ENUMERATED,EncVal,Len); -encode_enumerated(Val, DoTag) when is_integer(Val) -> - dotag(DoTag, ?N_ENUMERATED, encode_integer(false,Val)); -encode_enumerated({Name,Val}, DoTag) when is_atom(Name) -> - encode_enumerated(Val, DoTag). - -%% The encode_enumerated functions below this line can be removed when the -%% new code generation is stable. (the functions might have to be kept here -%% a while longer for compatibility reasons) - -encode_enumerated(C, Val, {NamedNumberList,ExtList}, DoTag) when is_atom(Val) -> - case catch encode_enumerated(C, Val, NamedNumberList, DoTag) of - {'EXIT',_} -> encode_enumerated(C, Val, ExtList, DoTag); - Result -> Result - end; - -encode_enumerated(C, Val, NamedNumberList, DoTag) when is_atom(Val) -> - case lists:keyfind(Val, 1, NamedNumberList) of - {_, NewVal} when DoTag =:= [] -> - {EncVal,Len} = encode_integer(C,NewVal), - dotag_universal(?N_ENUMERATED,EncVal,Len); - {_, NewVal} -> - dotag(DoTag, ?N_ENUMERATED, encode_integer(C, NewVal)); - _ -> - exit({error,{asn1, {enumerated_not_in_range, Val}}}) - end; - -encode_enumerated(C, {asn1_enum, Val}, {_,_}, DoTag) when is_integer(Val) -> - dotag(DoTag, ?N_ENUMERATED, encode_integer(C,Val)); - -encode_enumerated(C, {Name,Val}, NamedNumberList, DoTag) when is_atom(Name) -> - encode_enumerated(C, Val, NamedNumberList, DoTag); - -encode_enumerated(_, Val, _, _) -> - exit({error,{asn1, {enumerated_not_namednumber, Val}}}). - - - -%%============================================================================ -%% decode enumerated value -%% (Buffer, Range, NamedNumberList, HasTag, TotalLen) -> -%% {Value, RemainingBuffer, RemovedBytes} -%%=========================================================================== -decode_enumerated(Buffer, Range, NamedNumberList, Tags, OptOrMand) -> - NewTags = new_tags(Tags,#tag{class=?UNIVERSAL,number=?N_ENUMERATED}), - decode_enumerated_notag(Buffer, Range, NamedNumberList, - NewTags, OptOrMand). - -decode_enumerated_notag(Buffer, Range, NNList = {NamedNumberList,ExtList}, Tags, OptOrMand) -> - {RestTags, {FormLen, Buffer0, Rb0}} = - check_tags_i(Tags, Buffer, OptOrMand), - - case FormLen of - {?CONSTRUCTED,Len} -> - {Buffer00,RestBytes} = split_list(Buffer0,Len), - {Val01, Buffer01, Rb01} = - decode_enumerated_notag(Buffer00, Range, NNList, RestTags, OptOrMand), - {Buffer02, Rb02} = restbytes2(RestBytes,Buffer01,noext), - {Val01, Buffer02, Rb0+Rb01+Rb02}; - {_,Len} -> - {Val01, Buffer01, Rb01} = - decode_integer2(Len, Buffer0, Rb0+Len), - case decode_enumerated1(Val01, NamedNumberList) of - {asn1_enum,Val01} -> - {decode_enumerated1(Val01,ExtList), Buffer01, Rb01}; - Result01 -> - {Result01, Buffer01, Rb01} - end - end; - -decode_enumerated_notag(Buffer, Range, NNList, Tags, OptOrMand) -> - {RestTags, {FormLen, Buffer0, Rb0}} = - check_tags_i(Tags, Buffer, OptOrMand), - - case FormLen of - {?CONSTRUCTED,Len} -> - {Buffer00,RestBytes} = split_list(Buffer0,Len), - {Val01, Buffer01, Rb01} = - decode_enumerated_notag(Buffer00, Range, NNList, RestTags, OptOrMand), - {Buffer02, Rb02} = restbytes2(RestBytes,Buffer01,noext), - {Val01, Buffer02, Rb0+Rb01+Rb02}; - {_,Len} -> - {Val01, Buffer02, Rb02} = - decode_integer2(Len, Buffer0, Rb0+Len), - case decode_enumerated1(Val01, NNList) of - {asn1_enum,_} -> - exit({error,{asn1, {illegal_enumerated, Val01}}}); - Result01 -> - {Result01, Buffer02, Rb02} - end - end. - -decode_enumerated1(Val, NamedNumberList) -> - %% it must be a named integer - case lists:keyfind(Val, 2, NamedNumberList) of - {NamedVal, _} -> - NamedVal; - _ -> - {asn1_enum,Val} - end. - - %%============================================================================ %% %% Real value, ITU_T X.690 Chapter 8.5 @@ -1117,513 +412,15 @@ decode_real2(Buffer0, _C, Len, RemBytes1) -> {{Mantissa, Base, Exp}, Buffer4, RemBytes2+RemBytes3} end. +encode_integer_pos(0, L=[B|_Acc]) when B < 128 -> + L; +encode_integer_pos(N, Acc) -> + encode_integer_pos((N bsr 8), [N band 16#ff| Acc]). -%%============================================================================ -%% Bitstring value, ITU_T X.690 Chapter 8.6 -%% -%% encode bitstring value -%% -%% bitstring NamedBitList -%% Val can be of: -%% - [identifiers] where only named identifers are set to one, -%% the Constraint must then have some information of the -%% bitlength. -%% - [list of ones and zeroes] all bits -%% - integer value representing the bitlist -%% C is constrint Len, only valid when identifiers -%%============================================================================ - -encode_bit_string(C,Bin={Unused,BinBits},NamedBitList,DoTag) when is_integer(Unused), is_binary(BinBits) -> - encode_bin_bit_string(C,Bin,NamedBitList,DoTag); -encode_bit_string(C, [FirstVal | RestVal], NamedBitList, DoTag) when is_atom(FirstVal) -> - encode_bit_string_named(C, [FirstVal | RestVal], NamedBitList, DoTag); - -encode_bit_string(C, [{bit,X} | RestVal], NamedBitList, DoTag) -> - encode_bit_string_named(C, [{bit,X} | RestVal], NamedBitList, DoTag); - -encode_bit_string(C, [FirstVal| RestVal], NamedBitList, DoTag) when is_integer(FirstVal) -> - encode_bit_string_bits(C, [FirstVal | RestVal], NamedBitList, DoTag); - -encode_bit_string(_, 0, _, []) -> - {[?N_BIT_STRING,1,0],3}; - -encode_bit_string(_, 0, _, DoTag) -> - dotag(DoTag, ?N_BIT_STRING, {<<0>>,1}); - -encode_bit_string(_, [], _, []) -> - {[?N_BIT_STRING,1,0],3}; - -encode_bit_string(_, [], _, DoTag) -> - dotag(DoTag, ?N_BIT_STRING, {<<0>>,1}); - -encode_bit_string(C, IntegerVal, NamedBitList, DoTag) when is_integer(IntegerVal) -> - BitListVal = int_to_bitlist(IntegerVal), - encode_bit_string_bits(C, BitListVal, NamedBitList, DoTag); - -encode_bit_string(C, {Name,BitList}, NamedBitList, DoTag) when is_atom(Name) -> - encode_bit_string(C, BitList, NamedBitList, DoTag). - - - -int_to_bitlist(0) -> - []; -int_to_bitlist(Int) when is_integer(Int), Int >= 0 -> - [Int band 1 | int_to_bitlist(Int bsr 1)]. - - -%%================================================================= -%% Encode BIT STRING of the form {Unused,BinBits}. -%% Unused is the number of unused bits in the last byte in BinBits -%% and BinBits is a binary representing the BIT STRING. -%%================================================================= -encode_bin_bit_string(C,{Unused,BinBits},_NamedBitList,DoTag)-> - case get_constraint(C,'SizeConstraint') of - no -> - remove_unused_then_dotag(DoTag,?N_BIT_STRING,Unused,BinBits); - {_Min,Max} -> - BBLen = (size(BinBits)*8)-Unused, - if - BBLen > Max -> - exit({error,{asn1, - {bitstring_length, - {{was,BBLen},{maximum,Max}}}}}); - true -> - remove_unused_then_dotag(DoTag,?N_BIT_STRING, - Unused,BinBits) - end; - Size -> - case ((size(BinBits)*8)-Unused) of - BBSize when BBSize =< Size -> - remove_unused_then_dotag(DoTag,?N_BIT_STRING, - Unused,BinBits); - BBSize -> - exit({error,{asn1, - {bitstring_length, - {{was,BBSize},{should_be,Size}}}}}) - end - end. - -remove_unused_then_dotag(DoTag,StringType,Unused,BinBits) -> - case Unused of - 0 when (byte_size(BinBits) =:= 0), DoTag =:= [] -> - %% time optimization of next case - {[StringType,1,0],3}; - 0 when (byte_size(BinBits) =:= 0) -> - dotag(DoTag,StringType,{<<0>>,1}); - 0 when DoTag =:= [] -> % time optimization of next case - dotag_universal(StringType,[Unused|[BinBits]],size(BinBits)+1); -% {LenEnc,Len} = encode_legth(size(BinBits)+1), -% {[StringType,LenEnc,[Unused|BinBits]],size(BinBits)+1+Len+1}; - 0 -> - dotag(DoTag,StringType,<<Unused,BinBits/binary>>); - Num when DoTag =:= [] -> % time optimization of next case - N = byte_size(BinBits) - 1, - <<BBits:N/binary,LastByte>> = BinBits, - dotag_universal(StringType, - [Unused,BBits,(LastByte bsr Num) bsl Num], - byte_size(BinBits) + 1); -% {LenEnc,Len} = encode_legth(size(BinBits)+1), -% {[StringType,LenEnc,[Unused,BBits,(LastByte bsr Num) bsl Num], -% 1+Len+size(BinBits)+1}; - Num -> - N = byte_size(BinBits) - 1, - <<BBits:N/binary,LastByte>> = BinBits, - dotag(DoTag,StringType,{[Unused,binary_to_list(BBits) ++ - [(LastByte bsr Num) bsl Num]], - byte_size(BinBits) + 1}) - end. - - -%%================================================================= -%% Encode named bits -%%================================================================= - -encode_bit_string_named(C, [FirstVal | RestVal], NamedBitList, DoTag) -> - {Len,Unused,OctetList} = - case get_constraint(C,'SizeConstraint') of - no -> - ToSetPos = get_all_bitposes([FirstVal | RestVal], - NamedBitList, []), - BitList = make_and_set_list(lists:max(ToSetPos)+1, - ToSetPos, 0), - encode_bitstring(BitList); - {_Min,Max} -> - ToSetPos = get_all_bitposes([FirstVal | RestVal], - NamedBitList, []), - BitList = make_and_set_list(Max, ToSetPos, 0), - encode_bitstring(BitList); - Size -> - ToSetPos = get_all_bitposes([FirstVal | RestVal], - NamedBitList, []), - BitList = make_and_set_list(Size, ToSetPos, 0), - encode_bitstring(BitList) - end, - case DoTag of - [] -> - dotag_universal(?N_BIT_STRING,[Unused|OctetList],Len+1); -% {EncLen,LenLen} = encode_length(Len+1), -% {[?N_BIT_STRING,EncLen,Unused,OctetList],1+LenLen+Len+1}; - _ -> - dotag(DoTag, ?N_BIT_STRING, {[Unused|OctetList],Len+1}) - end. - - -%%---------------------------------------- -%% get_all_bitposes([list of named bits to set], named_bit_db, []) -> -%% [sorted_list_of_bitpositions_to_set] -%%---------------------------------------- - -get_all_bitposes([{bit,ValPos}|Rest], NamedBitList, Ack) -> - get_all_bitposes(Rest, NamedBitList, [ValPos | Ack ]); -get_all_bitposes([Val | Rest], NamedBitList, Ack) when is_atom(Val) -> - case lists:keyfind(Val, 1, NamedBitList) of - {_ValName, ValPos} -> - get_all_bitposes(Rest, NamedBitList, [ValPos | Ack]); - _ -> - exit({error,{asn1, {bitstring_namedbit, Val}}}) - end; -get_all_bitposes([], _NamedBitList, Ack) -> - lists:sort(Ack). - - -%%---------------------------------------- -%% make_and_set_list(Len of list to return, [list of positions to set to 1])-> -%% returns list of Len length, with all in SetPos set. -%% in positioning in list the first element is 0, the second 1 etc.., but -%% Len will make a list of length Len, not Len + 1. -%% BitList = make_and_set_list(C, ToSetPos, 0), -%%---------------------------------------- - -make_and_set_list(0, [], _) -> []; -make_and_set_list(0, _, _) -> - exit({error,{asn1,bitstring_sizeconstraint}}); -make_and_set_list(Len, [XPos|SetPos], XPos) -> - [1 | make_and_set_list(Len - 1, SetPos, XPos + 1)]; -make_and_set_list(Len, [Pos|SetPos], XPos) -> - [0 | make_and_set_list(Len - 1, [Pos | SetPos], XPos + 1)]; -make_and_set_list(Len, [], XPos) -> - [0 | make_and_set_list(Len - 1, [], XPos + 1)]. - - -%%================================================================= -%% Encode bit string for lists of ones and zeroes -%%================================================================= -encode_bit_string_bits(C, BitListVal, _NamedBitList, DoTag) when is_list(BitListVal) -> - {Len,Unused,OctetList} = - case get_constraint(C,'SizeConstraint') of - no -> - encode_bitstring(BitListVal); - Constr={Min,_Max} when is_integer(Min) -> - encode_constr_bit_str_bits(Constr,BitListVal,DoTag); - {Constr={_,_},[]} -> - %% constraint with extension mark - encode_constr_bit_str_bits(Constr,BitListVal,DoTag); - Constr={{_,_},{_,_}} ->%{{Min1,Max1},{Min2,Max2}} - %% constraint with extension mark - encode_constr_bit_str_bits(Constr,BitListVal,DoTag); - Size -> - case length(BitListVal) of - BitSize when BitSize =:= Size -> - encode_bitstring(BitListVal); - BitSize when BitSize < Size -> - PaddedList = - pad_bit_list(Size-BitSize,BitListVal), - encode_bitstring(PaddedList); - BitSize -> - exit({error, - {asn1, - {bitstring_length, - {{was,BitSize}, - {should_be,Size}}}}}) - end - end, - %%add unused byte to the Len - case DoTag of - [] -> - dotag_universal(?N_BIT_STRING,[Unused|OctetList],Len+1); -% {EncLen,LenLen}=encode_length(Len+1), -% {[?N_BIT_STRING,EncLen,Unused|OctetList],1+LenLen+Len+1}; - _ -> - dotag(DoTag, ?N_BIT_STRING, - {[Unused | OctetList],Len+1}) - end. - - -encode_constr_bit_str_bits({{_Min1,Max1},{Min2,Max2}},BitListVal,_DoTag) -> - BitLen = length(BitListVal), - case BitLen of - Len when Len > Max2 -> - exit({error,{asn1,{bitstring_length,{{was,BitLen}, - {maximum,Max2}}}}}); - Len when Len > Max1, Len < Min2 -> - exit({error,{asn1,{bitstring_length,{{was,BitLen}, - {not_allowed_interval, - Max1,Min2}}}}}); - _ -> - encode_bitstring(BitListVal) - end; -encode_constr_bit_str_bits({Min,Max},BitListVal,_DoTag) -> - BitLen = length(BitListVal), - if - BitLen > Max -> - exit({error,{asn1,{bitstring_length,{{was,BitLen}, - {maximum,Max}}}}}); - BitLen < Min -> - exit({error,{asn1,{bitstring_length,{{was,BitLen}, - {minimum,Min}}}}}); - true -> - encode_bitstring(BitListVal) - end. - - -%% returns a list of length Size + length(BitListVal), with BitListVal -%% as the most significant elements followed by padded zero elements -pad_bit_list(Size,BitListVal) -> - Tail = lists:duplicate(Size,0), - BitListVal ++ Tail. - -%%================================================================= -%% Do the actual encoding -%% ([bitlist]) -> {ListLen, UnusedBits, OctetList} -%%================================================================= - -encode_bitstring([B8, B7, B6, B5, B4, B3, B2, B1 | Rest]) -> - Val = (B8 bsl 7) bor (B7 bsl 6) bor (B6 bsl 5) bor (B5 bsl 4) bor - (B4 bsl 3) bor (B3 bsl 2) bor (B2 bsl 1) bor B1, - encode_bitstring(Rest, [Val], 1); -encode_bitstring(Val) -> - {Unused, Octet} = unused_bitlist(Val, 7, 0), - {1, Unused, [Octet]}. - -encode_bitstring([B8, B7, B6, B5, B4, B3, B2, B1 | Rest], Ack, Len) -> - Val = (B8 bsl 7) bor (B7 bsl 6) bor (B6 bsl 5) bor (B5 bsl 4) bor - (B4 bsl 3) bor (B3 bsl 2) bor (B2 bsl 1) bor B1, - encode_bitstring(Rest, [Ack | [Val]], Len + 1); -%%even multiple of 8 bits.. -encode_bitstring([], Ack, Len) -> - {Len, 0, Ack}; -%% unused bits in last octet -encode_bitstring(Rest, Ack, Len) -> -% io:format("uneven ~w ~w ~w~n",[Rest, Ack, Len]), - {Unused, Val} = unused_bitlist(Rest, 7, 0), - {Len + 1, Unused, [Ack | [Val]]}. - -%%%%%%%%%%%%%%%%%% -%% unused_bitlist([list of ones and zeros <= 7], 7, []) -> -%% {Unused bits, Last octet with bits moved to right} -unused_bitlist([], Trail, Ack) -> - {Trail + 1, Ack}; -unused_bitlist([Bit | Rest], Trail, Ack) -> -%% io:format("trail Bit: ~w Rest: ~w Trail: ~w Ack:~w~n",[Bit, Rest, Trail, Ack]), - unused_bitlist(Rest, Trail - 1, (Bit bsl Trail) bor Ack). - - -%%============================================================================ -%% decode bitstring value -%% (Buffer, Range, NamedNumberList, HasTag, TotalLen) -> {Integer, Remain, RemovedBytes} -%%============================================================================ - -decode_compact_bit_string(Buffer, Range, NamedNumberList, Tags, LenIn, OptOrMand) -> -% NewTags = new_tags(HasTag,#tag{class=?UNIVERSAL,number=?N_BIT_STRING}), - decode_restricted_string(Buffer, Range, ?N_BIT_STRING, Tags, LenIn, - NamedNumberList, OptOrMand,bin). - -decode_bit_string(Buffer, Range, NamedNumberList, Tags, LenIn, OptOrMand) -> -% NewTags = new_tags(HasTag,#tag{class=?UNIVERSAL,number=?N_BIT_STRING}), - decode_restricted_string(Buffer, Range, ?N_BIT_STRING, Tags, LenIn, - NamedNumberList, OptOrMand,old). - - -decode_bit_string2(1,<<0 ,Buffer/binary>>,_NamedNumberList,RemovedBytes,BinOrOld) -> - case BinOrOld of - bin -> - {{0,<<>>},Buffer,RemovedBytes}; - _ -> - {[], Buffer, RemovedBytes} - end; -decode_bit_string2(Len,<<Unused,Buffer/binary>>,NamedNumberList, - RemovedBytes,BinOrOld) -> - L = Len - 1, - <<Bits:L/binary,BufferTail/binary>> = Buffer, - case NamedNumberList of - [] -> - case BinOrOld of - bin -> - {{Unused,Bits},BufferTail,RemovedBytes}; - _ -> - BitString = decode_bitstring2(L, Unused, Buffer), - {BitString,BufferTail, RemovedBytes} - end; - _ -> - BitString = decode_bitstring2(L, Unused, Buffer), - {decode_bitstring_NNL(BitString,NamedNumberList), - BufferTail, - RemovedBytes} - end. - -%%---------------------------------------- -%% Decode the in buffer to bits -%%---------------------------------------- -decode_bitstring2(1,Unused,<<B7:1,B6:1,B5:1,B4:1,B3:1,B2:1,B1:1,B0:1,_/binary>>) -> - lists:sublist([B7,B6,B5,B4,B3,B2,B1,B0],8-Unused); -decode_bitstring2(Len, Unused, - <<B7:1,B6:1,B5:1,B4:1,B3:1,B2:1,B1:1,B0:1,Buffer/binary>>) -> - [B7, B6, B5, B4, B3, B2, B1, B0 | - decode_bitstring2(Len - 1, Unused, Buffer)]. - -%%decode_bitstring2(1, Unused, Buffer) -> -%% make_bits_of_int(hd(Buffer), 128, 8-Unused); -%%decode_bitstring2(Len, Unused, [BitVal | Buffer]) -> -%% [B7, B6, B5, B4, B3, B2, B1, B0] = make_bits_of_int(BitVal, 128, 8), -%% [B7, B6, B5, B4, B3, B2, B1, B0 | -%% decode_bitstring2(Len - 1, Unused, Buffer)]. - - -%%make_bits_of_int(_, _, 0) -> -%% []; -%%make_bits_of_int(BitVal, MaskVal, Unused) when Unused > 0 -> -%% X = case MaskVal band BitVal of -%% 0 -> 0 ; -%% _ -> 1 -%% end, -%% [X | make_bits_of_int(BitVal, MaskVal bsr 1, Unused - 1)]. - - - -%%---------------------------------------- -%% Decode the bitlist to names -%%---------------------------------------- - -decode_bitstring_NNL(BitList,NamedNumberList) -> - decode_bitstring_NNL(BitList,NamedNumberList,0,[]). - - -decode_bitstring_NNL([],_,_No,Result) -> - lists:reverse(Result); - -decode_bitstring_NNL([B|BitList],[{Name,No}|NamedNumberList],No,Result) -> - if - B =:= 0 -> - decode_bitstring_NNL(BitList,NamedNumberList,No+1,Result); - true -> - decode_bitstring_NNL(BitList,NamedNumberList,No+1,[Name|Result]) - end; -decode_bitstring_NNL([1|BitList],NamedNumberList,No,Result) -> - decode_bitstring_NNL(BitList,NamedNumberList,No+1,[{bit,No}|Result]); -decode_bitstring_NNL([0|BitList],NamedNumberList,No,Result) -> - decode_bitstring_NNL(BitList,NamedNumberList,No+1,Result). - - -%%============================================================================ -%% Octet string, ITU_T X.690 Chapter 8.7 -%% -%% encode octet string -%% The OctetList must be a flat list of integers in the range 0..255 -%% the function does not check this because it takes to much time -%%============================================================================ -encode_octet_string(_C, OctetList, []) when is_binary(OctetList) -> - dotag_universal(?N_OCTET_STRING,OctetList,byte_size(OctetList)); -encode_octet_string(_C, OctetList, DoTag) when is_binary(OctetList) -> - dotag(DoTag, ?N_OCTET_STRING, {OctetList,byte_size(OctetList)}); -encode_octet_string(_C, OctetList, DoTag) when is_list(OctetList) -> - case length(OctetList) of - Len when DoTag =:= [] -> - dotag_universal(?N_OCTET_STRING,OctetList,Len); - Len -> - dotag(DoTag, ?N_OCTET_STRING, {OctetList,Len}) - end; -%% encode_octet_string(C, OctetList, DoTag) when is_list(OctetList) -> -%% dotag(DoTag, ?N_OCTET_STRING, {OctetList,length(OctetList)}); -encode_octet_string(C, {Name,OctetList}, DoTag) when is_atom(Name) -> - encode_octet_string(C, OctetList, DoTag). - - -%%============================================================================ -%% decode octet string -%% (Buffer, Range, HasTag, TotalLen) -> {String, Remain, RemovedBytes} -%% -%% Octet string is decoded as a restricted string -%%============================================================================ -decode_octet_string(Buffer, Range, Tags, TotalLen, OptOrMand) -> -%% NewTags = new_tags(HasTag,#tag{class=?UNIVERSAL,number=?N_OCTET_STRING}), - decode_restricted_string(Buffer, Range, ?N_OCTET_STRING, - Tags, TotalLen, [], OptOrMand,old). - -%%============================================================================ -%% Null value, ITU_T X.690 Chapter 8.8 -%% -%% encode NULL value -%%============================================================================ - -encode_null(_, []) -> - {[?N_NULL,0],2}; -encode_null(_, DoTag) -> - dotag(DoTag, ?N_NULL, {[],0}). - -%%============================================================================ -%% decode NULL value -%% (Buffer, HasTag, TotalLen) -> {NULL, Remain, RemovedBytes} -%%============================================================================ -decode_null(Buffer, Tags, OptOrMand) -> - NewTags = new_tags(Tags,#tag{class=?UNIVERSAL,number=?N_NULL}), - decode_null_notag(Buffer, NewTags, OptOrMand). - -decode_null_notag(Buffer, Tags, OptOrMand) -> - {RestTags, {FormLen, Buffer0, Rb0}} = - check_tags_i(Tags, Buffer, OptOrMand), - - case FormLen of - {?CONSTRUCTED,Len} -> - {_Buffer00,RestBytes} = split_list(Buffer0,Len), - {Val01, Buffer01, Rb01} = decode_null_notag(Buffer0, RestTags, - OptOrMand), - {Buffer02, Rb02} = restbytes2(RestBytes,Buffer01,noext), - {Val01, Buffer02, Rb0+Rb01+Rb02}; - {_,0} -> - {'NULL', Buffer0, Rb0}; - {_,Len} -> - exit({error,{asn1,{invalid_length,'NULL',Len}}}) - end. - - -%%============================================================================ -%% Object identifier, ITU_T X.690 Chapter 8.19 -%% -%% encode Object Identifier value -%%============================================================================ - -encode_object_identifier({Name,Val}, DoTag) when is_atom(Name) -> - encode_object_identifier(Val, DoTag); -encode_object_identifier(Val, []) -> - {EncVal,Len} = e_object_identifier(Val), - dotag_universal(?N_OBJECT_IDENTIFIER,EncVal,Len); -encode_object_identifier(Val, DoTag) -> - dotag(DoTag, ?N_OBJECT_IDENTIFIER, e_object_identifier(Val)). - -e_object_identifier({'OBJECT IDENTIFIER', V}) -> - e_object_identifier(V); -e_object_identifier({Cname, V}) when is_atom(Cname), is_tuple(V) -> - e_object_identifier(tuple_to_list(V)); -e_object_identifier({Cname, V}) when is_atom(Cname), is_list(V) -> - e_object_identifier(V); -e_object_identifier(V) when is_tuple(V) -> - e_object_identifier(tuple_to_list(V)); - -%%%%%%%%%%%%%%% -%% e_object_identifier([List of Obect Identifiers]) -> -%% {[Encoded Octetlist of ObjIds], IntLength} -%% -e_object_identifier([E1, E2 | Tail]) -> - Head = 40*E1 + E2, % wow! - {H,Lh} = mk_object_val(Head), - {R,Lr} = enc_obj_id_tail(Tail, [], 0), - {[H|R], Lh+Lr}. - -enc_obj_id_tail([], Ack, Len) -> - {lists:reverse(Ack), Len}; -enc_obj_id_tail([H|T], Ack, Len) -> - {B, L} = mk_object_val(H), - enc_obj_id_tail(T, [B|Ack], Len+L). +encode_integer_neg(-1, L=[B1|_T]) when B1 > 127 -> + L; +encode_integer_neg(N, Acc) -> + encode_integer_neg(N bsr 8, [N band 16#ff|Acc]). %%%%%%%%%%% @@ -1643,476 +440,6 @@ mk_object_val(Val, Ack, Len) -> mk_object_val(Val bsr 7, [((Val band 127) bor 128) | Ack], Len + 1). - -%%============================================================================ -%% decode Object Identifier value -%% (Buffer, HasTag, TotalLen) -> {{ObjId}, Remain, RemovedBytes} -%%============================================================================ - -decode_object_identifier(Buffer, Tags, OptOrMand) -> - NewTags = new_tags(Tags,#tag{class=?UNIVERSAL, - number=?N_OBJECT_IDENTIFIER}), - decode_object_identifier_notag(Buffer, NewTags, OptOrMand). - -decode_object_identifier_notag(Buffer, Tags, OptOrMand) -> - {RestTags, {FormLen, Buffer0, Rb0}} = - check_tags_i(Tags, Buffer, OptOrMand), - - case FormLen of - {?CONSTRUCTED,Len} -> - {Buffer00,RestBytes} = split_list(Buffer0,Len), - {Val01, Buffer01, Rb01} = - decode_object_identifier_notag(Buffer00, - RestTags, OptOrMand), - {Buffer02, Rb02} = restbytes2(RestBytes,Buffer01,noext), - {Val01, Buffer02, Rb0+Rb01+Rb02}; - {_,Len} -> - {[AddedObjVal|ObjVals],Buffer01} = - dec_subidentifiers(Buffer0,0,[],Len), - {Val1, Val2} = if - AddedObjVal < 40 -> - {0, AddedObjVal}; - AddedObjVal < 80 -> - {1, AddedObjVal - 40}; - true -> - {2, AddedObjVal - 80} - end, - {list_to_tuple([Val1, Val2 | ObjVals]), Buffer01, - Rb0+Len} - end. - -dec_subidentifiers(Buffer,_Av,Al,0) -> - {lists:reverse(Al),Buffer}; -dec_subidentifiers(<<1:1,H:7,T/binary>>,Av,Al,Len) -> - dec_subidentifiers(T,(Av bsl 7) + H,Al,Len-1); -dec_subidentifiers(<<H,T/binary>>,Av,Al,Len) -> - dec_subidentifiers(T,0,[((Av bsl 7) + H)|Al],Len-1). - -%%============================================================================ -%% RELATIVE-OID, ITU_T X.690 Chapter 8.20 -%% -%% encode Relative Object Identifier -%%============================================================================ -encode_relative_oid({Name,Val},TagIn) when is_atom(Name) -> - encode_relative_oid(Val,TagIn); -encode_relative_oid(Val,TagIn) when is_tuple(Val) -> - encode_relative_oid(tuple_to_list(Val),TagIn); -encode_relative_oid(Val,[]) -> - {EncVal,Len} = enc_relative_oid(Val), - dotag_universal(?'N_RELATIVE-OID',EncVal,Len); -encode_relative_oid(Val, DoTag) -> - dotag(DoTag, ?'N_RELATIVE-OID', enc_relative_oid(Val)). - -enc_relative_oid(Val) -> - lists:mapfoldl(fun(X,AccIn) -> - {SO,L}=mk_object_val(X), - {SO,L+AccIn} - end - ,0,Val). - -%%============================================================================ -%% decode Relative Object Identifier value -%% (Buffer, HasTag, TotalLen) -> {{ObjId}, Remain, RemovedBytes} -%%============================================================================ -decode_relative_oid(Buffer, Tags, OptOrMand) -> - NewTags = new_tags(Tags,#tag{class=?UNIVERSAL, - number=?'N_RELATIVE-OID'}), - decode_relative_oid_notag(Buffer, NewTags, OptOrMand). - -decode_relative_oid_notag(Buffer, Tags, OptOrMand) -> - {_RestTags, {_FormLen={_,Len}, Buffer0, Rb0}} = - check_tags_i(Tags, Buffer, OptOrMand), - {ObjVals,Buffer01} = - dec_subidentifiers(Buffer0,0,[],Len), - {list_to_tuple(ObjVals), Buffer01, Rb0+Len}. - -%%============================================================================ -%% Restricted character string types, ITU_T X.690 Chapter 8.21 -%% -%% encode Numeric Printable Teletex Videotex Visible IA5 Graphic General strings -%%============================================================================ -encode_restricted_string(_C, OctetList, StringType, []) - when is_binary(OctetList) -> - dotag_universal(StringType, OctetList, byte_size(OctetList)); -encode_restricted_string(_C, OctetList, StringType, DoTag) - when is_binary(OctetList) -> - dotag(DoTag, StringType, {OctetList, byte_size(OctetList)}); -encode_restricted_string(_C, OctetList, StringType, []) - when is_list(OctetList) -> - dotag_universal(StringType, OctetList, length(OctetList)); -encode_restricted_string(_C, OctetList, StringType, DoTag) - when is_list(OctetList) -> - dotag(DoTag, StringType, {OctetList, length(OctetList)}); -encode_restricted_string(C,{Name,OctetL},StringType,DoTag) when is_atom(Name) -> - encode_restricted_string(C, OctetL, StringType, DoTag). - -%%============================================================================ -%% decode Numeric Printable Teletex Videotex Visible IA5 Graphic General strings -%% (Buffer, Range, StringType, HasTag, TotalLen) -> -%% {String, Remain, RemovedBytes} -%%============================================================================ - -decode_restricted_string(Buffer, Range, StringType, Tags, LenIn, OptOrMand) -> - {Val,Buffer2,Rb} = - decode_restricted_string_tag(Buffer, Range, StringType, Tags, - LenIn, [], OptOrMand,old), - {check_and_convert_restricted_string(Val,StringType,Range,[],old), - Buffer2,Rb}. - - -decode_restricted_string(Buffer, Range, StringType, Tags, LenIn, NNList, OptOrMand, BinOrOld ) -> - {Val,Buffer2,Rb} = - decode_restricted_string_tag(Buffer, Range, StringType, Tags, - LenIn, NNList, OptOrMand, BinOrOld), - {check_and_convert_restricted_string(Val,StringType,Range,NNList,BinOrOld), - Buffer2,Rb}. - -decode_restricted_string_tag(Buffer, Range, StringType, TagsIn, LenIn, NNList, OptOrMand, BinOrOld ) -> - NewTags = new_tags(TagsIn, #tag{class=?UNIVERSAL,number=StringType}), - decode_restricted_string_notag(Buffer, Range, StringType, NewTags, - LenIn, NNList, OptOrMand, BinOrOld). - - -check_and_convert_restricted_string(Val,StringType,Range,NamedNumberList,_BinOrOld) -> - {StrLen,NewVal} = case StringType of - ?N_BIT_STRING when NamedNumberList =/= [] -> - {no_check,Val}; - ?N_BIT_STRING when is_list(Val) -> - {length(Val),Val}; - ?N_BIT_STRING when is_tuple(Val) -> - {(size(element(2,Val))*8) - element(1,Val),Val}; - _ when is_binary(Val) -> - {byte_size(Val),binary_to_list(Val)}; - _ when is_list(Val) -> - {length(Val), Val} - end, - case Range of - _ when StrLen =:= no_check -> - NewVal; - [] -> % No length constraint - NewVal; - {Lb,Ub} when StrLen >= Lb, Ub >= StrLen -> % variable length constraint - NewVal; - {{Lb,_Ub},[]} when StrLen >= Lb -> - NewVal; - {{Lb,_Ub},_Ext=[MinExt|_]} when StrLen >= Lb; StrLen >= MinExt -> - NewVal; - {{Lb1,Ub1},{Lb2,Ub2}} when StrLen >= Lb1, StrLen =< Ub1; - StrLen =< Ub2, StrLen >= Lb2 -> - NewVal; - StrLen -> % fixed length constraint - NewVal; - {_,_} -> - exit({error,{asn1,{length,Range,Val}}}); - _Len when is_integer(_Len) -> - exit({error,{asn1,{length,Range,Val}}}); - _ -> % some strange constraint that we don't support yet - NewVal - end. - -%%============================================================================= -%% Common routines for several string types including bit string -%% handles indefinite length -%%============================================================================= - - -decode_restricted_string_notag(Buffer, _Range, StringType, TagsIn, - _, NamedNumberList, OptOrMand, BinOrOld) -> - %%----------------------------------------------------------- - %% Get inner (the implicit tag or no tag) and - %% outer (the explicit tag) lengths. - %%----------------------------------------------------------- - {RestTags, {FormLength={_,_Len01}, Buffer0, Rb0}} = - check_tags_i(TagsIn, Buffer, OptOrMand), - - case FormLength of - {?CONSTRUCTED,Len} -> - {Buffer00, RestBytes} = split_list(Buffer0,Len), - {Val01, Buffer01, Rb01} = - decode_restricted_parts(Buffer00, RestBytes, [], StringType, - RestTags, - Len, NamedNumberList, - OptOrMand, - BinOrOld, 0, []), - {Val01, Buffer01, Rb0+Rb01}; - {_, Len} -> - {Val01, Buffer01, Rb01} = - decode_restricted(Buffer0, Len, StringType, - NamedNumberList, BinOrOld), - {Val01, Buffer01, Rb0+Rb01} - end. - - -decode_restricted_parts(Buffer, RestBytes, [], StringType, RestTags, Len, NNList, - OptOrMand, BinOrOld, AccRb, AccVal) -> - DecodeFun = case RestTags of - [] -> fun decode_restricted_string_tag/8; - _ -> fun decode_restricted_string_notag/8 - end, - {Val, Buffer1, Rb} = - DecodeFun(Buffer, [], StringType, RestTags, - no_length, NNList, - OptOrMand, BinOrOld), - {Buffer2,More} = - case Buffer1 of - <<0,0,Buffer10/binary>> when Len == indefinite -> - {Buffer10,false}; - <<>> -> - {RestBytes,false}; - _ -> - {Buffer1,true} - end, - {NewVal, NewRb} = - case StringType of - ?N_BIT_STRING when BinOrOld == bin -> - {concat_bit_binaries(AccVal, Val), AccRb+Rb}; - _ when is_binary(Val),is_binary(AccVal) -> - {<<AccVal/binary,Val/binary>>,AccRb+Rb}; - _ when is_binary(Val), AccVal =:= [] -> - {Val,AccRb+Rb}; - _ -> - {AccVal++Val, AccRb+Rb} - end, - case More of - false -> - {NewVal, Buffer2, NewRb}; - true -> - decode_restricted_parts(Buffer2, RestBytes, [], StringType, RestTags, Len, NNList, - OptOrMand, BinOrOld, NewRb, NewVal) - end. - - - -decode_restricted(Buffer, InnerLen, StringType, NamedNumberList,BinOrOld) -> - - case StringType of - ?N_BIT_STRING -> - decode_bit_string2(InnerLen,Buffer,NamedNumberList,InnerLen,BinOrOld); - - ?N_UniversalString -> - <<PreBuff:InnerLen/binary,RestBuff/binary>> = Buffer,%%added for binary - UniString = mk_universal_string(binary_to_list(PreBuff)), - {UniString,RestBuff,InnerLen}; - ?N_BMPString -> - <<PreBuff:InnerLen/binary,RestBuff/binary>> = Buffer,%%added for binary - BMP = mk_BMP_string(binary_to_list(PreBuff)), - {BMP,RestBuff,InnerLen}; - _ -> - <<PreBuff:InnerLen/binary,RestBuff/binary>> = Buffer,%%added for binary - {PreBuff, RestBuff, InnerLen} - end. - - - -%%============================================================================ -%% encode Universal string -%%============================================================================ - -encode_universal_string(C, {Name, Universal}, DoTag) when is_atom(Name) -> - encode_universal_string(C, Universal, DoTag); -encode_universal_string(_C, Universal, []) -> - OctetList = mk_uni_list(Universal), - dotag_universal(?N_UniversalString,OctetList,length(OctetList)); -encode_universal_string(_C, Universal, DoTag) -> - OctetList = mk_uni_list(Universal), - dotag(DoTag, ?N_UniversalString, {OctetList,length(OctetList)}). - -mk_uni_list(In) -> - mk_uni_list(In,[]). - -mk_uni_list([],List) -> - lists:reverse(List); -mk_uni_list([{A,B,C,D}|T],List) -> - mk_uni_list(T,[D,C,B,A|List]); -mk_uni_list([H|T],List) -> - mk_uni_list(T,[H,0,0,0|List]). - -%%=========================================================================== -%% decode Universal strings -%% (Buffer, Range, StringType, HasTag, LenIn) -> -%% {String, Remain, RemovedBytes} -%%=========================================================================== - -decode_universal_string(Buffer, Range, Tags, LenIn, OptOrMand) -> -% NewTags = new_tags(HasTag, #tag{class=?UNIVERSAL,number=?N_UniversalString}), - decode_restricted_string(Buffer, Range, ?N_UniversalString, - Tags, LenIn, [], OptOrMand,old). - - -mk_universal_string(In) -> - mk_universal_string(In,[]). - -mk_universal_string([],Acc) -> - lists:reverse(Acc); -mk_universal_string([0,0,0,D|T],Acc) -> - mk_universal_string(T,[D|Acc]); -mk_universal_string([A,B,C,D|T],Acc) -> - mk_universal_string(T,[{A,B,C,D}|Acc]). - - -%%============================================================================ -%% encode UTF8 string -%%============================================================================ -encode_UTF8_string(_,UTF8String,[]) when is_binary(UTF8String) -> - dotag_universal(?N_UTF8String,UTF8String,byte_size(UTF8String)); -encode_UTF8_string(_,UTF8String,DoTag) when is_binary(UTF8String) -> - dotag(DoTag,?N_UTF8String,{UTF8String,byte_size(UTF8String)}); -encode_UTF8_string(_,UTF8String,[]) -> - dotag_universal(?N_UTF8String,UTF8String,length(UTF8String)); -encode_UTF8_string(_,UTF8String,DoTag) -> - dotag(DoTag,?N_UTF8String,{UTF8String,length(UTF8String)}). - -%%============================================================================ -%% decode UTF8 string -%%============================================================================ - -decode_UTF8_string(Buffer, Tags, OptOrMand) -> - NewTags = new_tags(Tags, #tag{class=?UNIVERSAL,number=?N_UTF8String}), - decode_UTF8_string_notag(Buffer, NewTags, OptOrMand). - -decode_UTF8_string_notag(Buffer, Tags, OptOrMand) -> - {RestTags, {FormLen, Buffer0, Rb0}} = - check_tags_i(Tags, Buffer, OptOrMand), - case FormLen of - {?CONSTRUCTED,Len} -> - %% an UTF8String may be encoded as a constructed type - {Buffer00,RestBytes} = split_list(Buffer0,Len), - {Val01, Buffer01, Rb01} = - decode_UTF8_string_notag(Buffer00,RestTags,OptOrMand), - {Buffer02, Rb02} = restbytes2(RestBytes,Buffer01,noext), - {Val01, Buffer02, Rb0+Rb01+Rb02}; - {_,Len} -> - <<Result:Len/binary,RestBuff/binary>> = Buffer0, - {Result,RestBuff,Rb0 + Len} - end. - - -%%============================================================================ -%% encode BMP string -%%============================================================================ - -encode_BMP_string(C, {Name,BMPString}, DoTag) when is_atom(Name) -> - encode_BMP_string(C, BMPString, DoTag); -encode_BMP_string(_C, BMPString, []) -> - OctetList = mk_BMP_list(BMPString), - dotag_universal(?N_BMPString,OctetList,length(OctetList)); -encode_BMP_string(_C, BMPString, DoTag) -> - OctetList = mk_BMP_list(BMPString), - dotag(DoTag, ?N_BMPString, {OctetList,length(OctetList)}). - -mk_BMP_list(In) -> - mk_BMP_list(In,[]). - -mk_BMP_list([],List) -> - lists:reverse(List); -mk_BMP_list([{0,0,C,D}|T],List) -> - mk_BMP_list(T,[D,C|List]); -mk_BMP_list([H|T],List) -> - mk_BMP_list(T,[H,0|List]). - -%%============================================================================ -%% decode (OctetList, Range(ignored), tag|notag) -> {ValList, RestList} -%% (Buffer, Range, StringType, HasTag, TotalLen) -> -%% {String, Remain, RemovedBytes} -%%============================================================================ -decode_BMP_string(Buffer, Range, Tags, LenIn, OptOrMand) -> -% NewTags = new_tags(HasTag, #tag{class=?UNIVERSAL,number=?N_BMPString}), - decode_restricted_string(Buffer, Range, ?N_BMPString, - Tags, LenIn, [], OptOrMand,old). - -mk_BMP_string(In) -> - mk_BMP_string(In,[]). - -mk_BMP_string([],US) -> - lists:reverse(US); -mk_BMP_string([0,B|T],US) -> - mk_BMP_string(T,[B|US]); -mk_BMP_string([C,D|T],US) -> - mk_BMP_string(T,[{0,0,C,D}|US]). - - -%%============================================================================ -%% Generalized time, ITU_T X.680 Chapter 39 -%% -%% encode Generalized time -%%============================================================================ - -encode_generalized_time(C, {Name,OctetList}, DoTag) when is_atom(Name) -> - encode_generalized_time(C, OctetList, DoTag); -encode_generalized_time(_C, OctetList, []) -> - dotag_universal(?N_GeneralizedTime,OctetList,length(OctetList)); -encode_generalized_time(_C, OctetList, DoTag) -> - dotag(DoTag, ?N_GeneralizedTime, {OctetList,length(OctetList)}). - -%%============================================================================ -%% decode Generalized time -%% (Buffer, Range, HasTag, TotalLen) -> {String, Remain, RemovedBytes} -%%============================================================================ - -decode_generalized_time(Buffer, Range, Tags, TotalLen, OptOrMand) -> - NewTags = new_tags(Tags,#tag{class=?UNIVERSAL, - number=?N_GeneralizedTime}), - decode_generalized_time_notag(Buffer, Range, NewTags, TotalLen, OptOrMand). - -decode_generalized_time_notag(Buffer, Range, Tags, TotalLen, OptOrMand) -> - {RestTags, {FormLen, Buffer0, Rb0}} = - check_tags_i(Tags, Buffer, OptOrMand), - - case FormLen of - {?CONSTRUCTED,Len} -> - {Buffer00,RestBytes} = split_list(Buffer0,Len), - {Val01, Buffer01, Rb01} = - decode_generalized_time_notag(Buffer00, Range, - RestTags, TotalLen, - OptOrMand), - {Buffer02, Rb02} = restbytes2(RestBytes,Buffer01,noext), - {Val01, Buffer02, Rb0+Rb01+Rb02}; - {_,Len} -> - <<PreBuff:Len/binary,RestBuff/binary>> = Buffer0, - {binary_to_list(PreBuff), RestBuff, Rb0+Len} - end. - -%%============================================================================ -%% Universal time, ITU_T X.680 Chapter 40 -%% -%% encode UTC time -%%============================================================================ - -encode_utc_time(C, {Name,OctetList}, DoTag) when is_atom(Name) -> - encode_utc_time(C, OctetList, DoTag); -encode_utc_time(_C, OctetList, []) -> - dotag_universal(?N_UTCTime, OctetList,length(OctetList)); -encode_utc_time(_C, OctetList, DoTag) -> - dotag(DoTag, ?N_UTCTime, {OctetList,length(OctetList)}). - -%%============================================================================ -%% decode UTC time -%% (Buffer, Range, HasTag, TotalLen) -> {String, Remain, RemovedBytes} -%%============================================================================ - -decode_utc_time(Buffer, Range, Tags, TotalLen, OptOrMand) -> - NewTags = new_tags(Tags,#tag{class=?UNIVERSAL,number=?N_UTCTime}), - decode_utc_time_notag(Buffer, Range, NewTags, TotalLen, OptOrMand). - -decode_utc_time_notag(Buffer, Range, Tags, TotalLen, OptOrMand) -> - {RestTags, {FormLen, Buffer0, Rb0}} = - check_tags_i(Tags, Buffer, OptOrMand), - - case FormLen of - {?CONSTRUCTED,Len} -> - {Buffer00,RestBytes} = split_list(Buffer0,Len), - {Val01, Buffer01, Rb01} = - decode_utc_time_notag(Buffer00, Range, - RestTags, TotalLen, - OptOrMand), - {Buffer02, Rb02} = restbytes2(RestBytes,Buffer01,noext), - {Val01, Buffer02, Rb0+Rb01+Rb02}; - {_,Len} -> - <<PreBuff:Len/binary,RestBuff/binary>> = Buffer0, - {binary_to_list(PreBuff), RestBuff, Rb0+Len} - end. - - %%============================================================================ %% Length handling %% @@ -2122,8 +449,6 @@ decode_utc_time_notag(Buffer, Range, Tags, TotalLen, OptOrMand) -> %% [<127]| [128 + Int (<127),OctetList] | [16#80] %%============================================================================ -encode_length(indefinite) -> - {[16#80],1}; % 128 encode_length(L) when L =< 16#7F -> {[L],1}; encode_length(L) -> @@ -2162,242 +487,12 @@ decode_length(<<1:1,LL:7,T/binary>>) -> <<Length:LL/unit:8,Rest/binary>> = T, {{Length,Rest}, LL+1}. -%decode_length([128 | T]) -> -% {{indefinite, T},1}; -%decode_length([H | T]) when H =< 127 -> -% {{H, T},1}; -%decode_length([H | T]) -> -% dec_long_length(H band 16#7F, T, 0, 1). - - -%%dec_long_length(0, Buffer, Acc, Len) -> -%% {{Acc, Buffer},Len}; -%%dec_long_length(Bytes, [H | T], Acc, Len) -> -%% dec_long_length(Bytes - 1, T, (Acc bsl 8) + H, Len+1). - -%%=========================================================================== -%% Decode tag and length -%% -%% decode_tag_and_length(Buffer) -> {Tag, Len, RemainingBuffer, RemovedBytes} -%% -%%=========================================================================== - -decode_tag_and_length(Buffer) -> - {Tag, Buffer2, RemBytesTag} = decode_tag(Buffer), - {{Len, Buffer3}, RemBytesLen} = decode_length(Buffer2), - {Tag, Len, Buffer3, RemBytesTag+RemBytesLen}. - - -%%============================================================================ -%% Check if valid tag -%% -%% check_if_valid_tag(Tag, List_of_valid_tags, OptOrMand) -> name of the tag -%%============================================================================ - -check_if_valid_tag(<<0,0,_/binary>>,_,_) -> - asn1_EOC; -check_if_valid_tag(<<>>, _, OptOrMand) -> - check_if_valid_tag2_error([], OptOrMand); -check_if_valid_tag(Bytes, ListOfTags, OptOrMand) when is_binary(Bytes) -> - {Tag, _, _} = decode_tag(Bytes), - check_if_valid_tag(Tag, ListOfTags, OptOrMand); - -%% This alternative should be removed in the near future -%% Bytes as input should be the only necessary call -check_if_valid_tag(Tag, ListOfTags, OptOrMand) -> - {Class, _Form, TagNo} = Tag, - C = code_class(Class), - T = case C of - 'UNIVERSAL' -> - code_type(TagNo); - _ -> - TagNo - end, - check_if_valid_tag2({C,T}, ListOfTags, Tag, OptOrMand). - -check_if_valid_tag2(_Class_TagNo, [], Tag, MandOrOpt) -> - check_if_valid_tag2_error(Tag,MandOrOpt); -check_if_valid_tag2(Class_TagNo, [{TagName,TagList}|T], Tag, OptOrMand) -> - case check_if_valid_tag_loop(Class_TagNo, TagList) of - true -> - TagName; - false -> - check_if_valid_tag2(Class_TagNo, T, Tag, OptOrMand) - end. - --spec check_if_valid_tag2_error(term(), atom()) -> no_return(). - -check_if_valid_tag2_error(Tag,mandatory) -> - exit({error,{asn1,{invalid_tag,Tag}}}); -check_if_valid_tag2_error(Tag,_) -> - exit({error,{asn1,{no_optional_tag,Tag}}}). - -check_if_valid_tag_loop(_Class_TagNo,[]) -> - false; -check_if_valid_tag_loop(Class_TagNo,[H|T]) -> - %% It is not possible to distinguish between SEQUENCE OF and SEQUENCE, and - %% between SET OF and SET because both are coded as 16 and 17, respectively. - H_without_OF = case H of - {C, 'SEQUENCE OF'} -> - {C, 'SEQUENCE'}; - {C, 'SET OF'} -> - {C, 'SET'}; - Else -> - Else - end, - - case H_without_OF of - Class_TagNo -> - true; - {_,_} -> - check_if_valid_tag_loop(Class_TagNo,T); - _ -> - check_if_valid_tag_loop(Class_TagNo,H), - check_if_valid_tag_loop(Class_TagNo,T) - end. - - - -code_class(0) -> 'UNIVERSAL'; -code_class(16#40) -> 'APPLICATION'; -code_class(16#80) -> 'CONTEXT'; -code_class(16#C0) -> 'PRIVATE'. - - -code_type(1) -> 'BOOLEAN'; -code_type(2) -> 'INTEGER'; -code_type(3) -> 'BIT STRING'; -code_type(4) -> 'OCTET STRING'; -code_type(5) -> 'NULL'; -code_type(6) -> 'OBJECT IDENTIFIER'; -code_type(7) -> 'ObjectDescriptor'; -code_type(8) -> 'EXTERNAL'; -code_type(9) -> 'REAL'; -code_type(10) -> 'ENUMERATED'; -code_type(11) -> 'EMBEDDED_PDV'; -code_type(16) -> 'SEQUENCE'; -% code_type(16) -> 'SEQUENCE OF'; -code_type(17) -> 'SET'; -% code_type(17) -> 'SET OF'; -code_type(18) -> 'NumericString'; -code_type(19) -> 'PrintableString'; -code_type(20) -> 'TeletexString'; -code_type(21) -> 'VideotexString'; -code_type(22) -> 'IA5String'; -code_type(23) -> 'UTCTime'; -code_type(24) -> 'GeneralizedTime'; -code_type(25) -> 'GraphicString'; -code_type(26) -> 'VisibleString'; -code_type(27) -> 'GeneralString'; -code_type(28) -> 'UniversalString'; -code_type(30) -> 'BMPString'; -code_type(Else) -> exit({error,{asn1,{unrecognized_type,Else}}}). - -%%------------------------------------------------------------------------- -%% decoding of the components of a SET -%%------------------------------------------------------------------------- - -decode_set(Rb, indefinite, <<0,0,Bytes/binary>>, _OptOrMand, _Fun3, Acc) -> - {lists:reverse(Acc),Bytes,Rb+2}; - -decode_set(Rb, indefinite, Bytes, OptOrMand, Fun3, Acc) -> - case Fun3(Bytes, OptOrMand) of - {_Term, _Remain, 0} -> - {lists:reverse(Acc),Bytes,Rb}; - {Term, Remain, Rb1} -> - Fun3(Bytes, OptOrMand), - decode_set(Rb+Rb1, indefinite, Remain, OptOrMand, Fun3, [Term|Acc]) - end; -%% {Term, Remain, Rb1} = Fun3(Bytes, OptOrMand), -%% decode_set(Rb+Rb1, indefinite, Remain, OptOrMand, Fun3, [Term|Acc]); - -decode_set(Rb, Num, Bytes, _OptOrMand, _Fun3, Acc) when Num == 0 -> - {lists:reverse(Acc), Bytes, Rb}; - -decode_set(_, Num, _, _, _, _) when Num < 0 -> - exit({error,{asn1,{length_error,'SET'}}}); - -decode_set(Rb, Num, Bytes, OptOrMand, Fun3, Acc) -> - case Fun3(Bytes, OptOrMand) of - {_Term, _Remain, 0} -> - {lists:reverse(Acc),Bytes,Rb}; - {Term, Remain, Rb1} -> - Fun3(Bytes, OptOrMand), - decode_set(Rb+Rb1, Num-Rb1, Remain, OptOrMand, Fun3, [Term|Acc]) - end. -%% {Term, Remain, Rb1} = Fun3(Bytes, OptOrMand), -%% decode_set(Rb+Rb1, Num-Rb1, Remain, OptOrMand, Fun3, [Term|Acc]). - - -%%------------------------------------------------------------------------- -%% decoding of SEQUENCE OF and SET OF -%%------------------------------------------------------------------------- - -decode_components(Rb, indefinite, <<0,0,Bytes/binary>>, _Fun3, _TagIn, Acc) -> - {lists:reverse(Acc),Bytes,Rb+2}; - -decode_components(Rb, indefinite, Bytes, Fun3, TagIn, Acc) -> - {Term, Remain, Rb1} = Fun3(Bytes, mandatory, TagIn), - decode_components(Rb+Rb1, indefinite, Remain, Fun3, TagIn, [Term|Acc]); - -decode_components(Rb, Num, Bytes, _Fun3, _TagIn, Acc) when Num == 0 -> - {lists:reverse(Acc), Bytes, Rb}; - -decode_components(_, Num, _, _, _, _) when Num < 0 -> - exit({error,{asn1,{length_error,'SET/SEQUENCE OF'}}}); - -decode_components(Rb, Num, Bytes, Fun3, TagIn, Acc) -> - {Term, Remain, Rb1} = Fun3(Bytes, mandatory, TagIn), - decode_components(Rb+Rb1, Num-Rb1, Remain, Fun3, TagIn, [Term|Acc]). - -%%decode_components(Rb, indefinite, [0,0|Bytes], _Fun3, _TagIn, Acc) -> -%% {lists:reverse(Acc),Bytes,Rb+2}; - -decode_components(Rb, indefinite, <<0,0,Bytes/binary>>, _Fun4, _TagIn, _Fun, Acc) -> - {lists:reverse(Acc),Bytes,Rb+2}; - -decode_components(Rb, indefinite, Bytes, _Fun4, TagIn, _Fun, Acc) -> - {Term, Remain, Rb1} = _Fun4(Bytes, mandatory, TagIn, _Fun), - decode_components(Rb+Rb1, indefinite, Remain, _Fun4, TagIn, _Fun, [Term|Acc]); - -decode_components(Rb, Num, Bytes, _Fun4, _TagIn, _Fun, Acc) when Num == 0 -> - {lists:reverse(Acc), Bytes, Rb}; - -decode_components(_, Num, _, _, _, _, _) when Num < 0 -> - exit({error,{asn1,{length_error,'SET/SEQUENCE OF'}}}); - -decode_components(Rb, Num, Bytes, _Fun4, TagIn, _Fun, Acc) -> - {Term, Remain, Rb1} = _Fun4(Bytes, mandatory, TagIn, _Fun), - decode_components(Rb+Rb1, Num-Rb1, Remain, _Fun4, TagIn, _Fun, [Term|Acc]). - - - -%%------------------------------------------------------------------------- -%% INTERNAL HELPER FUNCTIONS (not exported) -%%------------------------------------------------------------------------- - - -%%========================================================================== -%% Encode tag -%% -%% dotag(tag | notag, TagValpattern | TagValTuple, [Length, Value]) -> [Tag] -%% TagValPattern is a correct bitpattern for a tag -%% TagValTuple is a tuple of three bitpatterns, Class, Form and TagNo where -%% Class = UNIVERSAL | APPLICATION | CONTEXT | PRIVATE -%% Form = Primitive | Constructed -%% TagNo = Number of tag -%%========================================================================== - dotag([], Tag, {Bytes,Len}) -> dotag_universal(Tag,Bytes,Len); dotag(Tags, Tag, {Bytes,Len}) -> encode_tags(Tags ++ [#tag{class=?UNIVERSAL,number=Tag,form=?PRIMITIVE}], - Bytes, Len); - -dotag(Tags, Tag, Bytes) -> - encode_tags(Tags ++ [#tag{class=?UNIVERSAL,number=Tag,form=?PRIMITIVE}], - Bytes, size(Bytes)). + Bytes, Len). dotag_universal(UniversalTag,Bytes,Len) when Len =< 16#7F-> {[UniversalTag,Len,Bytes],2+Len}; @@ -2415,47 +510,6 @@ decode_integer2(Len,<<1:1,B2:7,Bs/binary>>,RemovedBytes) -> Int = N - (1 bsl (8 * Len - 1)), {Int,Buffer2,RemovedBytes}. -%%decode_integer2(Len,Buffer,Acc,RemovedBytes) when (hd(Buffer) band 16#FF) =< 16#7F -> -%% {decode_integer_pos(Buffer, 8 * (Len - 1)),skip(Buffer,Len),RemovedBytes}; -%%decode_integer2(Len,Buffer,Acc,RemovedBytes) -> -%% {decode_integer_neg(Buffer, 8 * (Len - 1)),skip(Buffer,Len),RemovedBytes}. - -%%decode_integer_pos([Byte|Tail], Shift) -> -%% (Byte bsl Shift) bor decode_integer_pos(Tail, Shift-8); -%%decode_integer_pos([], _) -> 0. - - -%%decode_integer_neg([Byte|Tail], Shift) -> -%% (-128 + (Byte band 127) bsl Shift) bor decode_integer_pos(Tail, Shift-8). - - -concat_bit_binaries([],Bin={_,_}) -> - Bin; -concat_bit_binaries({0,B1},{U2,B2}) -> - {U2,<<B1/binary,B2/binary>>}; -concat_bit_binaries({U1,B1},{U2,B2}) -> - S1 = (size(B1) * 8) - U1, - S2 = (size(B2) * 8) - U2, - PadBits = 8 - ((S1+S2) rem 8), - {PadBits, <<B1:S1/binary-unit:1,B2:S2/binary-unit:1,0:PadBits>>}; -concat_bit_binaries(L1,L2) when is_list(L1), is_list(L2) -> - %% this case occur when decoding with NNL - L1 ++ L2. - - -get_constraint(C,Key) -> - case lists:keyfind(Key,1,C) of - false -> - no; - {_, V} -> - V - end. - -%%skip(Buffer, 0) -> -%% Buffer; -%%skip([H | T], Len) -> -%% skip(T, Len-1). - new_tags([],LastTag) -> [LastTag]; new_tags(Tags = [#tag{type='IMPLICIT'}],_LastTag) -> diff --git a/lib/asn1/src/asn1rt_ber_bin_v2.erl b/lib/asn1/src/asn1rt_ber_bin_v2.erl index 9ff5017c68..92ca11cf89 100644 --- a/lib/asn1/src/asn1rt_ber_bin_v2.erl +++ b/lib/asn1/src/asn1rt_ber_bin_v2.erl @@ -22,8 +22,7 @@ %% encoding / decoding of BER -export([decode/1, decode/2, match_tags/2, encode/1, encode/2]). --export([fixoptionals/2, cindex/3, - list_to_record/2, +-export([fixoptionals/2, encode_tag_val/1, encode_tags/3, skip_ExtensionAdditions/2]). @@ -54,8 +53,6 @@ decode_open_type_as_binary/3]). -export([decode_primitive_incomplete/2,decode_selective/2]). - --export([is_nif_loadable/0]). % the encoding of class of tag bits 8 and 7 -define(UNIVERSAL, 0). @@ -135,12 +132,7 @@ encode(Tlv,_) when is_binary(Tlv) -> encode([Tlv],Method) -> encode(Tlv,Method); encode(Tlv, nif) -> - case is_nif_loadable() of - true -> - asn1rt_nif:encode_ber_tlv(Tlv); - false -> - encode_erl(Tlv) - end; + asn1rt_nif:encode_ber_tlv(Tlv); encode(Tlv, _) -> encode_erl(Tlv). @@ -178,36 +170,15 @@ decode(B) -> %% asn1-1.7 decode(B, nif) -> - case is_nif_loadable() of - true -> - case asn1rt_nif:decode_ber_tlv(B) of - {error, Reason} -> handle_error(Reason, B); - Else -> Else - end; - false -> - decode(B) + case asn1rt_nif:decode_ber_tlv(B) of + {error, Reason} -> handle_error(Reason, B); + Else -> Else end; decode(B,erlang) when is_binary(B) -> decode_primitive(B); decode(Tlv,erlang) -> {Tlv,<<>>}. -%% Have to check this since asn1 is not guaranteed to be available -is_nif_loadable() -> - case application:get_env(asn1, nif_loadable) of - {ok,R} -> - R; - undefined -> - case catch code:load_file(asn1rt_nif) of - {module, asn1rt_nif} -> - application:set_env(asn1, nif_loadable, true), - true; - _Else -> - application:set_env(asn1, nif_loadable, false), - false - end - end. - handle_error([],_)-> exit({error,{asn1,{"memory allocation problem"}}}); handle_error({$1,_},L) -> % error in nif @@ -612,13 +583,6 @@ match_tags(Tlv, []) -> Tlv; match_tags(Tlv = {Tag,_V},[T|_Tt]) -> exit({error,{asn1,{wrong_tag,{{expected,T},{got,Tag,Tlv}}}}}). - - -cindex(Ix,Val,Cname) -> - case element(Ix,Val) of - {Cname,Val2} -> Val2; - X -> X - end. %%% %% skips components that do not match a tag in Tags @@ -642,13 +606,6 @@ skip_ExtensionAdditions(TLV=[{Tag,_}|Rest],Tags) -> %%=============================================================================== %%=============================================================================== -% converts a list to a record if necessary -list_to_record(Name,List) when is_list(List) -> - list_to_tuple([Name|List]); -list_to_record(_Name,Tuple) when is_tuple(Tuple) -> - Tuple. - - fixoptionals(OptList,Val) when is_list(Val) -> fixoptionals(OptList,Val,1,[],[]). diff --git a/lib/asn1/src/asn1rt_per_bin.erl b/lib/asn1/src/asn1rt_per_bin.erl deleted file mode 100644 index 5772f09bf4..0000000000 --- a/lib/asn1/src/asn1rt_per_bin.erl +++ /dev/null @@ -1,2285 +0,0 @@ -%% -%% %CopyrightBegin% -%% -%% Copyright Ericsson AB 2001-2012. All Rights Reserved. -%% -%% The contents of this file are subject to the Erlang Public License, -%% Version 1.1, (the "License"); you may not use this file except in -%% compliance with the License. You should have received a copy of the -%% Erlang Public License along with this software. If not, it can be -%% retrieved online at http://www.erlang.org/. -%% -%% Software distributed under the License is distributed on an "AS IS" -%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See -%% the License for the specific language governing rights and limitations -%% under the License. -%% -%% %CopyrightEnd% -%% -%% --module(asn1rt_per_bin). -%% encoding / decoding of PER aligned - --include("asn1_records.hrl"). - --export([dec_fixup/3, cindex/3, list_to_record/2]). --export([setchoiceext/1, setext/1, fixoptionals/2, fixoptionals/3, - fixextensions/2, - getext/1, getextension/2, skipextensions/3, getbit/1, getchoice/3 ]). --export([getoptionals/2, getoptionals2/2, set_choice/3, encode_integer/2, encode_integer/3 ]). --export([decode_integer/2, decode_integer/3, encode_small_number/1, encode_boolean/1, - decode_boolean/1, encode_length/2, decode_length/1, decode_length/2, - encode_small_length/1, decode_small_length/1, - decode_compact_bit_string/3]). --export([decode_enumerated/3, - encode_bit_string/3, decode_bit_string/3 ]). --export([encode_octet_string/2, decode_octet_string/2, - encode_null/1, decode_null/1, - encode_object_identifier/1, decode_object_identifier/1, - encode_real/1, decode_real/1, - encode_relative_oid/1, decode_relative_oid/1, - complete/1]). - - --export([encode_open_type/2, decode_open_type/2]). - --export([encode_UniversalString/2, decode_UniversalString/2, - encode_PrintableString/2, decode_PrintableString/2, - encode_GeneralString/2, decode_GeneralString/2, - encode_GraphicString/2, decode_GraphicString/2, - encode_TeletexString/2, decode_TeletexString/2, - encode_VideotexString/2, decode_VideotexString/2, - encode_VisibleString/2, decode_VisibleString/2, - encode_UTF8String/1, decode_UTF8String/1, - encode_BMPString/2, decode_BMPString/2, - encode_IA5String/2, decode_IA5String/2, - encode_NumericString/2, decode_NumericString/2, - encode_ObjectDescriptor/2, decode_ObjectDescriptor/1 - ]). --export([complete_bytes/1, getbits/2, getoctets/2, minimum_bits/1]). - --define('16K',16384). --define('32K',32768). --define('64K',65536). - -dec_fixup(Terms,Cnames,RemBytes) -> - dec_fixup(Terms,Cnames,RemBytes,[]). - -dec_fixup([novalue|T],[_Hc|Tc],RemBytes,Acc) -> - dec_fixup(T,Tc,RemBytes,Acc); -dec_fixup([{_Name,novalue}|T],[_Hc|Tc],RemBytes,Acc) -> - dec_fixup(T,Tc,RemBytes,Acc); -dec_fixup([H|T],[Hc|Tc],RemBytes,Acc) -> - dec_fixup(T,Tc,RemBytes,[{Hc,H}|Acc]); -dec_fixup([],_Cnames,RemBytes,Acc) -> - {lists:reverse(Acc),RemBytes}. - -cindex(Ix,Val,Cname) -> - case element(Ix,Val) of - {Cname,Val2} -> Val2; - X -> X - end. - -%% converts a list to a record if necessary -list_to_record(_Name,Tuple) when is_tuple(Tuple) -> - Tuple; -list_to_record(Name,List) when is_list(List) -> - list_to_tuple([Name|List]). - -%%-------------------------------------------------------- -%% setchoiceext(InRootSet) -> [{bit,X}] -%% X is set to 1 when InRootSet==false -%% X is set to 0 when InRootSet==true -%% -setchoiceext(true) -> - [{debug,choiceext},{bits,1,0}]; -setchoiceext(false) -> - [{debug,choiceext},{bits,1,1}]. - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% setext(true|false) -> CompleteList -%% - -setext(false) -> - [{debug,ext},{bits,1,0}]; -setext(true) -> - [{debug,ext},{bits,1,1}]. - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% This version of fixoptionals/2 are left only because of -%% backward compatibility with older generates - -fixoptionals(OptList,Val) when is_tuple(Val) -> - fixoptionals1(OptList,Val,[]); - -fixoptionals(OptList,Val) when is_list(Val) -> - fixoptionals1(OptList,Val,1,[],[]). - -fixoptionals1([],Val,Acc) -> - %% return {Val,Opt} - {Val,lists:reverse(Acc)}; -fixoptionals1([{_,Pos}|Ot],Val,Acc) -> - case element(Pos+1,Val) of - asn1_NOVALUE -> fixoptionals1(Ot,Val,[0|Acc]); - asn1_DEFAULT -> fixoptionals1(Ot,Val,[0|Acc]); - _ -> fixoptionals1(Ot,Val,[1|Acc]) - end. - - -fixoptionals1([{Name,Pos}|Ot],[{Name,Val}|Vt],_Opt,Acc1,Acc2) -> - fixoptionals1(Ot,Vt,Pos+1,[1|Acc1],[{Name,Val}|Acc2]); -fixoptionals1([{_Name,Pos}|Ot],V,Pos,Acc1,Acc2) -> - fixoptionals1(Ot,V,Pos+1,[0|Acc1],[asn1_NOVALUE|Acc2]); -fixoptionals1(O,[Vh|Vt],Pos,Acc1,Acc2) -> - fixoptionals1(O,Vt,Pos+1,Acc1,[Vh|Acc2]); -fixoptionals1([],[Vh|Vt],Pos,Acc1,Acc2) -> - fixoptionals1([],Vt,Pos+1,Acc1,[Vh|Acc2]); -fixoptionals1([],[],_,Acc1,Acc2) -> - % return {Val,Opt} - {list_to_tuple([asn1_RECORDNAME|lists:reverse(Acc2)]),lists:reverse(Acc1)}. - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% This is the new fixoptionals/3 which is used by the new generates -%% -fixoptionals(OptList,OptLength,Val) when is_tuple(Val) -> - Bits = fixoptionals(OptList,Val,0), - {Val,{bits,OptLength,Bits}}; - -fixoptionals([],_Val,Acc) -> - %% Optbits - Acc; -fixoptionals([{Pos,DefVal}|Ot],Val,Acc) -> - case element(Pos,Val) of - asn1_DEFAULT -> fixoptionals(Ot,Val,Acc bsl 1); - DefVal -> fixoptionals(Ot,Val,Acc bsl 1); - _ -> fixoptionals(Ot,Val,(Acc bsl 1) + 1) - end; -fixoptionals([Pos|Ot],Val,Acc) -> - case element(Pos,Val) of - asn1_NOVALUE -> fixoptionals(Ot,Val,Acc bsl 1); - asn1_DEFAULT -> fixoptionals(Ot,Val,Acc bsl 1); - _ -> fixoptionals(Ot,Val,(Acc bsl 1) + 1) - end. - - -getext(Bytes) when is_tuple(Bytes) -> - getbit(Bytes); -getext(Bytes) when is_binary(Bytes) -> - getbit({0,Bytes}). - -getextension(0, Bytes) -> - {{},Bytes}; -getextension(1, Bytes) -> - {Len,Bytes2} = decode_small_length(Bytes), - {Blist, Bytes3} = getbits_as_list(Len,Bytes2), - {list_to_tuple(Blist),Bytes3}. - -fixextensions({ext,ExtPos,ExtNum},Val) -> - case fixextensions(ExtPos,ExtNum+ExtPos,Val,0) of - 0 -> []; - ExtBits -> - [encode_small_length(ExtNum),{bits,ExtNum,ExtBits}] - end. - -fixextensions(Pos,MaxPos,_,Acc) when Pos >= MaxPos -> - Acc; -fixextensions(Pos,ExtPos,Val,Acc) -> - Bit = case catch(element(Pos+1,Val)) of - asn1_NOVALUE -> - 0; - asn1_NOEXTVALUE -> - 0; - {'EXIT',_} -> - 0; - _ -> - 1 - end, - fixextensions(Pos+1,ExtPos,Val,(Acc bsl 1)+Bit). - -skipextensions(Bytes,Nr,ExtensionBitPattern) -> - case (catch element(Nr,ExtensionBitPattern)) of - 1 -> - {_,Bytes2} = decode_open_type(Bytes,[]), - skipextensions(Bytes2, Nr+1, ExtensionBitPattern); - 0 -> - skipextensions(Bytes, Nr+1, ExtensionBitPattern); - {'EXIT',_} -> % badarg, no more extensions - Bytes - end. - - -getchoice(Bytes,1,0) -> % only 1 alternative is not encoded - {0,Bytes}; -getchoice(Bytes,_,1) -> - decode_small_number(Bytes); -getchoice(Bytes,NumChoices,0) -> - decode_constrained_number(Bytes,{0,NumChoices-1}). - -%% old version kept for backward compatibility with generates from R7B -getoptionals(Bytes,NumOpt) -> - {Blist,Bytes1} = getbits_as_list(NumOpt,Bytes), - {list_to_tuple(Blist),Bytes1}. - -%% new version used in generates from r8b_patch/3 and later -getoptionals2(Bytes,NumOpt) -> - getbits(Bytes,NumOpt). - - -%% getbits_as_binary(Num,Bytes) -> {{Unused,BinBits},RestBytes}, -%% Num = integer(), -%% Bytes = list() | tuple(), -%% Unused = integer(), -%% BinBits = binary(), -%% RestBytes = tuple() -getbits_as_binary(Num,Bytes) when is_binary(Bytes) -> - getbits_as_binary(Num,{0,Bytes}); -getbits_as_binary(0,Buffer) -> - {{0,<<>>},Buffer}; -getbits_as_binary(Num,{0,Bin}) when Num > 16 -> - Used = Num rem 8, - Pad = (8 - Used) rem 8, -% Nbytes = Num div 8, - <<Bits:Num,_:Pad,RestBin/binary>> = Bin, - {{Pad,<<Bits:Num,0:Pad>>},RestBin}; -getbits_as_binary(Num,Buffer={_Used,_Bin}) -> % Unaligned buffer - %% Num =< 16, - {Bits2,Buffer2} = getbits(Buffer,Num), - Pad = (8 - (Num rem 8)) rem 8, - {{Pad,<<Bits2:Num,0:Pad>>},Buffer2}. - - -% integer_from_list(Int,[],BigInt) -> -% BigInt; -% integer_from_list(Int,[H|T],BigInt) when Int < 8 -> -% (BigInt bsl Int) bor (H bsr (8-Int)); -% integer_from_list(Int,[H|T],BigInt) -> -% integer_from_list(Int-8,T,(BigInt bsl 8) bor H). - -getbits_as_list(Num,Bytes) when is_binary(Bytes) -> - getbits_as_list(Num,{0,Bytes},[]); -getbits_as_list(Num,Bytes) -> - getbits_as_list(Num,Bytes,[]). - -%% If buffer is empty and nothing more will be picked. -getbits_as_list(0, B, Acc) -> - {lists:reverse(Acc),B}; -%% If first byte in buffer is full and at least one byte will be picked, -%% then pick one byte. -getbits_as_list(N,{0,Bin},Acc) when N >= 8 -> - <<B7:1,B6:1,B5:1,B4:1,B3:1,B2:1,B1:1,B0:1,Rest/binary>> = Bin, - getbits_as_list(N-8,{0,Rest},[B0,B1,B2,B3,B4,B5,B6,B7|Acc]); -getbits_as_list(N,{Used,Bin},Acc) when N >= 4, Used =< 4 -> - NewUsed = Used + 4, - Rem = 8 - NewUsed, - <<_:Used,B3:1,B2:1,B1:1,B0:1,_:Rem, Rest/binary>> = Bin, - NewRest = case Rem of 0 -> Rest; _ -> Bin end, - getbits_as_list(N-4,{NewUsed rem 8,NewRest},[B0,B1,B2,B3|Acc]); -getbits_as_list(N,{Used,Bin},Acc) when N >= 2, Used =< 6 -> - NewUsed = Used + 2, - Rem = 8 - NewUsed, - <<_:Used,B1:1,B0:1,_:Rem, Rest/binary>> = Bin, - NewRest = case Rem of 0 -> Rest; _ -> Bin end, - getbits_as_list(N-2,{NewUsed rem 8,NewRest},[B0,B1|Acc]); -getbits_as_list(N,{Used,Bin},Acc) when Used =< 7 -> - NewUsed = Used + 1, - Rem = 8 - NewUsed, - <<_:Used,B0:1,_:Rem, Rest/binary>> = Bin, - NewRest = case Rem of 0 -> Rest; _ -> Bin end, - getbits_as_list(N-1,{NewUsed rem 8,NewRest},[B0|Acc]). - - -getbit({7,<<_:7,B:1,Rest/binary>>}) -> - {B,{0,Rest}}; -getbit({0,Buffer = <<B:1,_:7,_/binary>>}) -> - {B,{1,Buffer}}; -getbit({Used,Buffer}) -> - Unused = (8 - Used) - 1, - <<_:Used,B:1,_:Unused,_/binary>> = Buffer, - {B,{Used+1,Buffer}}; -getbit(Buffer) when is_binary(Buffer) -> - getbit({0,Buffer}). - - -getbits({0,Buffer},Num) when (Num rem 8) == 0 -> - <<Bits:Num,Rest/binary>> = Buffer, - {Bits,{0,Rest}}; -getbits({Used,Bin},Num) -> - NumPlusUsed = Num + Used, - NewUsed = NumPlusUsed rem 8, - Unused = (8-NewUsed) rem 8, - case Unused of - 0 -> - <<_:Used,Bits:Num,Rest/binary>> = Bin, - {Bits,{0,Rest}}; - _ -> - Bytes = NumPlusUsed div 8, - <<_:Used,Bits:Num,_UBits:Unused,_/binary>> = Bin, - <<_:Bytes/binary,Rest/binary>> = Bin, - {Bits,{NewUsed,Rest}} - end; -getbits(Bin,Num) when is_binary(Bin) -> - getbits({0,Bin},Num). - - - -% getoctet(Bytes) when is_list(Bytes) -> -% getoctet({0,Bytes}); -% getoctet(Bytes) -> -% %% io:format("getoctet:Buffer = ~p~n",[Bytes]), -% getoctet1(Bytes). - -% getoctet1({0,[H|T]}) -> -% {H,{0,T}}; -% getoctet1({Pos,[_,H|T]}) -> -% {H,{0,T}}. - -align({0,L}) -> - {0,L}; -align({_Pos,<<_H,T/binary>>}) -> - {0,T}; -align(Bytes) -> - {0,Bytes}. - -%% First align buffer, then pick the first Num octets. -%% Returns octets as an integer with bit significance as in buffer. -getoctets({0,Buffer},Num) -> - <<Val:Num/integer-unit:8,RestBin/binary>> = Buffer, - {Val,{0,RestBin}}; -getoctets({U,<<_Padding,Rest/binary>>},Num) when U /= 0 -> - getoctets({0,Rest},Num); -getoctets(Buffer,Num) when is_binary(Buffer) -> - getoctets({0,Buffer},Num). -% getoctets(Buffer,Num) -> -% %% io:format("getoctets:Buffer = ~p~nNum = ~p~n",[Buffer,Num]), -% getoctets(Buffer,Num,0). - -% getoctets(Buffer,0,Acc) -> -% {Acc,Buffer}; -% getoctets(Buffer,Num,Acc) -> -% {Oct,NewBuffer} = getoctet(Buffer), -% getoctets(NewBuffer,Num-1,(Acc bsl 8)+Oct). - -% getoctets_as_list(Buffer,Num) -> -% getoctets_as_list(Buffer,Num,[]). - -% getoctets_as_list(Buffer,0,Acc) -> -% {lists:reverse(Acc),Buffer}; -% getoctets_as_list(Buffer,Num,Acc) -> -% {Oct,NewBuffer} = getoctet(Buffer), -% getoctets_as_list(NewBuffer,Num-1,[Oct|Acc]). - -%% First align buffer, then pick the first Num octets. -%% Returns octets as a binary -getoctets_as_bin({0,Bin},Num)-> - <<Octets:Num/binary,RestBin/binary>> = Bin, - {Octets,{0,RestBin}}; -getoctets_as_bin({_U,Bin},Num) -> - <<_Padding,Octets:Num/binary,RestBin/binary>> = Bin, - {Octets,{0,RestBin}}; -getoctets_as_bin(Bin,Num) when is_binary(Bin) -> - getoctets_as_bin({0,Bin},Num). - -%% same as above but returns octets as a List -getoctets_as_list(Buffer,Num) -> - {Bin,Buffer2} = getoctets_as_bin(Buffer,Num), - {binary_to_list(Bin),Buffer2}. -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% set_choice(Alt,Choices,Altnum) -> ListofBitSettings -%% Alt = atom() -%% Altnum = integer() | {integer(),integer()}% number of alternatives -%% Choices = [atom()] | {[atom()],[atom()]} -%% When Choices is a tuple the first list is the Rootset and the -%% second is the Extensions and then Altnum must also be a tuple with the -%% lengths of the 2 lists -%% -set_choice(Alt,{L1,L2},{Len1,_Len2}) -> - case set_choice_tag(Alt,L1) of - N when is_integer(N), Len1 > 1 -> - [{bits,1,0}, % the value is in the root set - encode_integer([{'ValueRange',{0,Len1-1}}],N)]; - N when is_integer(N) -> - [{bits,1,0}]; % no encoding if only 0 or 1 alternative - false -> - [{bits,1,1}, % extension value - case set_choice_tag(Alt,L2) of - N2 when is_integer(N2) -> - encode_small_number(N2); - false -> - unknown_choice_alt - end] - end; -set_choice(Alt,L,Len) -> - case set_choice_tag(Alt,L) of - N when is_integer(N), Len > 1 -> - encode_integer([{'ValueRange',{0,Len-1}}],N); - N when is_integer(N) -> - []; % no encoding if only 0 or 1 alternative - false -> - [unknown_choice_alt] - end. - -set_choice_tag(Alt,Choices) -> - set_choice_tag(Alt,Choices,0). - -set_choice_tag(Alt,[Alt|_Rest],Tag) -> - Tag; -set_choice_tag(Alt,[_H|Rest],Tag) -> - set_choice_tag(Alt,Rest,Tag+1); -set_choice_tag(_Alt,[],_Tag) -> - false. - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% decode_fragmented_XXX; decode of values encoded fragmented according -%% to ITU-T X.691 clause 10.9.3.8. The unit (XXX) is either bits, octets, -%% characters or number of components (in a choice,sequence or similar). -%% Buffer is a buffer {Used, Bin}. -%% C is the constrained length. -%% If the buffer is not aligned, this function does that. -decode_fragmented_bits({0,Buffer},C) -> - decode_fragmented_bits(Buffer,C,[]); -decode_fragmented_bits({_N,<<_,Bs/binary>>},C) -> - decode_fragmented_bits(Bs,C,[]). - -decode_fragmented_bits(<<3:2,Len:6,Bin/binary>>,C,Acc) -> - {Value,Bin2} = split_binary(Bin, Len * ?'16K'), - decode_fragmented_bits(Bin2,C,[Value,Acc]); -decode_fragmented_bits(<<0:1,0:7,Bin/binary>>,C,Acc) -> - BinBits = list_to_binary(lists:reverse(Acc)), - case C of - Int when is_integer(Int),C == size(BinBits) -> - {BinBits,{0,Bin}}; - Int when is_integer(Int) -> - exit({error,{asn1,{illegal_value,C,BinBits}}}) - end; -decode_fragmented_bits(<<0:1,Len:7,Bin/binary>>,C,Acc) -> - Result = {BinBits,{Used,_Rest}} = - case (Len rem 8) of - 0 -> - <<Value:Len/binary-unit:1,Bin2/binary>> = Bin, - {list_to_binary(lists:reverse([Value|Acc])),{0,Bin2}}; - Rem -> - Bytes = Len div 8, - U = 8 - Rem, - <<Value:Bytes/binary-unit:8,Bits1:Rem,Bits2:U,Bin2/binary>> = Bin, - {list_to_binary(lists:reverse([Bits1 bsl U,Value|Acc])), - {Rem,<<Bits2,Bin2/binary>>}} - end, - case C of - Int when is_integer(Int),C == (size(BinBits) - ((8 - Used) rem 8)) -> - Result; - Int when is_integer(Int) -> - exit({error,{asn1,{illegal_value,C,BinBits}}}) - end. - - -decode_fragmented_octets({0,Bin},C) -> - decode_fragmented_octets(Bin,C,[]). - -decode_fragmented_octets(<<3:2,Len:6,Bin/binary>>,C,Acc) -> - {Value,Bin2} = split_binary(Bin,Len * ?'16K'), - decode_fragmented_octets(Bin2,C,[Value,Acc]); -decode_fragmented_octets(<<0:1,0:7,Bin/binary>>,C,Acc) -> - Octets = list_to_binary(lists:reverse(Acc)), - case C of - Int when is_integer(Int), C == size(Octets) -> - {Octets,{0,Bin}}; - Int when is_integer(Int) -> - exit({error,{asn1,{illegal_value,C,Octets}}}) - end; -decode_fragmented_octets(<<0:1,Len:7,Bin/binary>>,C,Acc) -> - <<Value:Len/binary-unit:8,Bin2/binary>> = Bin, - BinOctets = list_to_binary(lists:reverse([Value|Acc])), - case C of - Int when is_integer(Int),size(BinOctets) == Int -> - {BinOctets,Bin2}; - Int when is_integer(Int) -> - exit({error,{asn1,{illegal_value,C,BinOctets}}}) - end. - - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% encode_open_type(Constraint, Value) -> CompleteList -%% Value = list of bytes of an already encoded value (the list must be flat) -%% | binary -%% Contraint = not used in this version -%% -encode_open_type(_C, Val) when is_list(Val) -> - Bin = list_to_binary(Val), - [encode_length(undefined,size(Bin)),{octets,Bin}]; % octets implies align -encode_open_type(_C, Val) when is_binary(Val) -> - [encode_length(undefined,size(Val)),{octets,Val}]. % octets implies align -%% the binary_to_list is not optimal but compatible with the current solution - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% decode_open_type(Buffer,Constraint) -> Value -%% Constraint is not used in this version -%% Buffer = [byte] with PER encoded data -%% Value = [byte] with decoded data (which must be decoded again as some type) -%% -decode_open_type(Bytes, _C) -> - {Len,Bytes2} = decode_length(Bytes,undefined), - getoctets_as_bin(Bytes2,Len). - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% encode_integer(Constraint,Value,NamedNumberList) -> CompleteList -%% encode_integer(Constraint,Value) -> CompleteList -%% encode_integer(Constraint,{Name,Value}) -> CompleteList -%% -%% -encode_integer(C,V,NamedNumberList) when is_atom(V) -> - case lists:keysearch(V,1,NamedNumberList) of - {value,{_,NewV}} -> - encode_integer(C,NewV); - _ -> - exit({error,{asn1,{namednumber,V}}}) - end; -encode_integer(C,V,_NamedNumberList) when is_integer(V) -> - encode_integer(C,V); -encode_integer(C,{Name,V},NamedNumberList) when is_atom(Name) -> - encode_integer(C,V,NamedNumberList). - -encode_integer(C,{Name,Val}) when is_atom(Name) -> - encode_integer(C,Val); - -encode_integer([{Rc,_Ec}],Val) when is_tuple(Rc) -> % XXX when is this invoked? First argument most often a list,...Ok this is the extension case...but it doesn't work. - case (catch encode_integer([Rc],Val)) of - {'EXIT',{error,{asn1,_}}} -> - [{bits,1,1},encode_unconstrained_number(Val)]; - Encoded -> - [{bits,1,0},Encoded] - end; -encode_integer(C,Val ) when is_list(C) -> - case get_constraint(C,'SingleValue') of - no -> - encode_integer1(C,Val); - V when is_integer(V),V == Val -> - []; % a type restricted to a single value encodes to nothing - V when is_list(V) -> - case lists:member(Val,V) of - true -> - encode_integer1(C,Val); - _ -> - exit({error,{asn1,{illegal_value,Val}}}) - end; - _ -> - exit({error,{asn1,{illegal_value,Val}}}) - end. - -encode_integer1(C, Val) -> - case VR = get_constraint(C,'ValueRange') of - no -> - encode_unconstrained_number(Val); - {Lb,'MAX'} -> - encode_semi_constrained_number(Lb,Val); - %% positive with range - {Lb,Ub} when Val >= Lb, - Ub >= Val -> - encode_constrained_number(VR,Val); - _ -> - exit({error,{asn1,{illegal_value,VR,Val}}}) - end. - -decode_integer(Buffer,Range,NamedNumberList) -> - {Val,Buffer2} = decode_integer(Buffer,Range), - case lists:keysearch(Val,2,NamedNumberList) of - {value,{NewVal,_}} -> {NewVal,Buffer2}; - _ -> {Val,Buffer2} - end. - -decode_integer(Buffer,[{Rc,_Ec}]) when is_tuple(Rc) -> - {Ext,Buffer2} = getext(Buffer), - case Ext of - 0 -> decode_integer(Buffer2,[Rc]); - 1 -> decode_unconstrained_number(Buffer2) - end; -decode_integer(Buffer,undefined) -> - decode_unconstrained_number(Buffer); -decode_integer(Buffer,C) -> - case get_constraint(C,'SingleValue') of - V when is_integer(V) -> - {V,Buffer}; - V when is_list(V) -> - {Val,Buffer2} = decode_integer1(Buffer,C), - case lists:member(Val,V) of - true -> - {Val,Buffer2}; - _ -> - exit({error,{asn1,{illegal_value,Val}}}) - end; - _ -> - decode_integer1(Buffer,C) - end. - -decode_integer1(Buffer,C) -> - case VR = get_constraint(C,'ValueRange') of - no -> - decode_unconstrained_number(Buffer); - {Lb, 'MAX'} -> - decode_semi_constrained_number(Buffer,Lb); - {_,_} -> - decode_constrained_number(Buffer,VR) - end. - - % X.691:10.6 Encoding of a normally small non-negative whole number - % Use this for encoding of CHOICE index if there is an extension marker in - % the CHOICE -encode_small_number({Name,Val}) when is_atom(Name) -> - encode_small_number(Val); -encode_small_number(Val) when Val =< 63 -> -% [{bits,1,0},{bits,6,Val}]; - [{bits,7,Val}]; % same as above but more efficient -encode_small_number(Val) -> - [{bits,1,1},encode_semi_constrained_number(0,Val)]. - -decode_small_number(Bytes) -> - {Bit,Bytes2} = getbit(Bytes), - case Bit of - 0 -> - getbits(Bytes2,6); - 1 -> - decode_semi_constrained_number(Bytes2,0) - end. - -%% X.691:10.7 Encoding of a semi-constrained whole number -%% might be an optimization encode_semi_constrained_number(0,Val) -> -encode_semi_constrained_number(C,{Name,Val}) when is_atom(Name) -> - encode_semi_constrained_number(C,Val); -encode_semi_constrained_number({Lb,'MAX'},Val) -> - encode_semi_constrained_number(Lb,Val); -encode_semi_constrained_number(Lb,Val) -> - Val2 = Val - Lb, - Oct = eint_positive(Val2), - Len = length(Oct), - if - Len < 128 -> - {octets,[Len|Oct]}; % equiv with encode_length(undefined,Len) but faster - true -> - [encode_length(undefined,Len),{octets,Oct}] - end. - -decode_semi_constrained_number(Bytes,{Lb,_}) -> - decode_semi_constrained_number(Bytes,Lb); -decode_semi_constrained_number(Bytes,Lb) -> - {Len,Bytes2} = decode_length(Bytes,undefined), - {V,Bytes3} = getoctets(Bytes2,Len), - {V+Lb,Bytes3}. - -encode_constrained_number(Range,{Name,Val}) when is_atom(Name) -> - encode_constrained_number(Range,Val); -encode_constrained_number({Lb,Ub},Val) when Val >= Lb, Ub >= Val -> - Range = Ub - Lb + 1, - Val2 = Val - Lb, - if - Range == 1 -> - []; - Range == 2 -> - {bits,1,Val2}; - Range =< 4 -> - {bits,2,Val2}; - Range =< 8 -> - {bits,3,Val2}; - Range =< 16 -> - {bits,4,Val2}; - Range =< 32 -> - {bits,5,Val2}; - Range =< 64 -> - {bits,6,Val2}; - Range =< 128 -> - {bits,7,Val2}; - Range =< 255 -> - {bits,8,Val2}; - Range =< 256 -> - {octets,[Val2]}; - Range =< 65536 -> - {octets,<<Val2:16>>}; - Range =< (1 bsl (255*8)) -> - Octs = binary:encode_unsigned(Val2), - RangeOcts = binary:encode_unsigned(Range - 1), - OctsLen = erlang:byte_size(Octs), - RangeOctsLen = erlang:byte_size(RangeOcts), - LengthBitsNeeded = minimum_bits(RangeOctsLen - 1), - [{bits, LengthBitsNeeded, OctsLen - 1}, {octets, Octs}]; - true -> - exit({not_supported,{integer_range,Range}}) - end; -encode_constrained_number(Range,Val) -> - exit({error,{asn1,{integer_range,Range,value,Val}}}). - -%% For some reason the minimum bits needed in the length field in encoding of -%% constrained whole numbers must always be atleast 2? -minimum_bits(N) when N < 4 -> 2; -minimum_bits(N) when N < 8 -> 3; -minimum_bits(N) when N < 16 -> 4; -minimum_bits(N) when N < 32 -> 5; -minimum_bits(N) when N < 64 -> 6; -minimum_bits(N) when N < 128 -> 7; -minimum_bits(_N) -> 8. - -decode_constrained_number(Buffer,{Lb,Ub}) -> - Range = Ub - Lb + 1, - % Val2 = Val - Lb, - {Val,Remain} = - if - Range == 1 -> - {0,Buffer}; - Range == 2 -> - getbits(Buffer,1); - Range =< 4 -> - getbits(Buffer,2); - Range =< 8 -> - getbits(Buffer,3); - Range =< 16 -> - getbits(Buffer,4); - Range =< 32 -> - getbits(Buffer,5); - Range =< 64 -> - getbits(Buffer,6); - Range =< 128 -> - getbits(Buffer,7); - Range =< 255 -> - getbits(Buffer,8); - Range =< 256 -> - getoctets(Buffer,1); - Range =< 65536 -> - getoctets(Buffer,2); - Range =< (1 bsl (255*8)) -> - OList = binary:bin_to_list(binary:encode_unsigned(Range - 1)), - RangeOctLen = length(OList), - {Len, Bytes} = decode_length(Buffer, {1, RangeOctLen}), - {Octs, RestBytes} = getoctets_as_list(Bytes, Len), - {binary:decode_unsigned(binary:list_to_bin(Octs)), RestBytes}; - true -> - exit({not_supported,{integer_range,Range}}) - end, - {Val+Lb,Remain}. - -%% X.691:10.8 Encoding of an unconstrained whole number - -encode_unconstrained_number(Val) when Val >= 0 -> - Oct = eint(Val,[]), - Len = length(Oct), - if - Len < 128 -> - {octets,[Len|Oct]}; % equiv with encode_length(undefined,Len) but faster - true -> - [encode_length(undefined,Len),{octets,Oct}] - end; -encode_unconstrained_number(Val) -> % negative - Oct = enint(Val,[]), - Len = length(Oct), - if - Len < 128 -> - {octets,[Len|Oct]}; % equiv with encode_length(undefined,Len) but faster - true -> - [encode_length(undefined,Len),{octets,Oct}] - end. - - -%% used for positive Values which don't need a sign bit -%% returns a binary -eint_positive(Val) -> - case eint(Val,[]) of - [0,B1|T] -> - [B1|T]; - T -> - T - end. - - -eint(0, [B|Acc]) when B < 128 -> - [B|Acc]; -eint(N, Acc) -> - eint(N bsr 8, [N band 16#ff| Acc]). - -enint(-1, [B1|T]) when B1 > 127 -> - [B1|T]; -enint(N, Acc) -> - enint(N bsr 8, [N band 16#ff|Acc]). - -decode_unconstrained_number(Bytes) -> - {Len,Bytes2} = decode_length(Bytes,undefined), - {Ints,Bytes3} = getoctets_as_list(Bytes2,Len), - {dec_integer(Ints),Bytes3}. - -dec_integer(Ints) when hd(Ints) band 255 =< 127 -> %% Positive number - decpint(Ints, 8 * (length(Ints) - 1)); -dec_integer(Ints) -> %% Negative - decnint(Ints, 8 * (length(Ints) - 1)). - -decpint([Byte|Tail], Shift) -> - (Byte bsl Shift) bor decpint(Tail, Shift-8); -decpint([], _) -> 0. - -decnint([Byte|Tail], Shift) -> - (-128 + (Byte band 127) bsl Shift) bor decpint(Tail, Shift-8). - -% minimum_octets(Val) -> -% minimum_octets(Val,[]). - -% minimum_octets(Val,Acc) when Val > 0 -> -% minimum_octets((Val bsr 8),[Val band 16#FF|Acc]); -% minimum_octets(0,Acc) -> -% Acc. - - -%% X.691:10.9 Encoding of a length determinant -%%encode_small_length(undefined,Len) -> % null means no UpperBound -%% encode_small_number(Len). - -%% X.691:10.9.3.5 -%% X.691:10.9.3.7 -encode_length(undefined,Len) -> % un-constrained - if - Len < 128 -> - {octets,[Len]}; - Len < 16384 -> - {octets,<<2:2,Len:14>>}; - true -> % should be able to endode length >= 16384 - exit({error,{asn1,{encode_length,{nyi,above_16k}}}}) - end; - -encode_length({0,'MAX'},Len) -> - encode_length(undefined,Len); -encode_length(Vr={Lb,Ub},Len) when Ub =< 65535 ,Lb >= 0 -> % constrained - encode_constrained_number(Vr,Len); -encode_length({Lb,_Ub},Len) when is_integer(Lb), Lb >= 0 -> % Ub > 65535 - encode_length(undefined,Len); -encode_length({Vr={Lb,Ub},Ext},Len) - when Ub =< 65535 ,Lb >= 0, Len=<Ub, is_list(Ext) -> - %% constrained extensible - [{bits,1,0},encode_constrained_number(Vr,Len)]; -encode_length({{Lb,_Ub},Ext},Len) when is_list(Ext) -> - [{bits,1,1},encode_semi_constrained_number(Lb,Len)]; -encode_length(SingleValue,_Len) when is_integer(SingleValue) -> - []. - -%% X.691 10.9.3.4 (only used for length of bitmap that prefixes extension -%% additions in a sequence or set -encode_small_length(Len) when Len =< 64 -> -%% [{bits,1,0},{bits,6,Len-1}]; - {bits,7,Len-1}; % the same as above but more efficient -encode_small_length(Len) -> - [{bits,1,1},encode_length(undefined,Len)]. - -% decode_small_length({Used,<<_:Used,0:1,Num:6,_:((8-Used+1) rem 8),Rest/binary>>}) -> -% case Buffer of -% <<_:Used,0:1,Num:6,_:((8-Used+1) rem 8),Rest/binary>> -> -% {Num, -% case getbit(Buffer) of -% {0,Remain} -> -% {Bits,Remain2} = getbits(Remain,6), -% {Bits+1,Remain2}; -% {1,Remain} -> -% decode_length(Remain,undefined) -% end. - -decode_small_length(Buffer) -> - case getbit(Buffer) of - {0,Remain} -> - {Bits,Remain2} = getbits(Remain,6), - {Bits+1,Remain2}; - {1,Remain} -> - decode_length(Remain,undefined) - end. - -decode_length(Buffer) -> - decode_length(Buffer,undefined). - -decode_length(Buffer,undefined) -> % un-constrained - {0,Buffer2} = align(Buffer), - case Buffer2 of - <<0:1,Oct:7,Rest/binary>> -> - {Oct,{0,Rest}}; - <<2:2,Val:14,Rest/binary>> -> - {Val,{0,Rest}}; - <<3:2,_:14,_Rest/binary>> -> - %% this case should be fixed - exit({error,{asn1,{decode_length,{nyi,above_16k}}}}) - end; -%% {Bits,_} = getbits(Buffer2,2), -% case Bits of -% 2 -> -% {Val,Bytes3} = getoctets(Buffer2,2), -% {(Val band 16#3FFF),Bytes3}; -% 3 -> -% exit({error,{asn1,{decode_length,{nyi,above_16k}}}}); -% _ -> -% {Val,Bytes3} = getoctet(Buffer2), -% {Val band 16#7F,Bytes3} -% end; - -decode_length(Buffer,{Lb,Ub}) when Ub =< 65535 ,Lb >= 0 -> % constrained - decode_constrained_number(Buffer,{Lb,Ub}); -decode_length(Buffer,{Lb,_}) when is_integer(Lb), Lb >= 0 -> % Ub > 65535 - decode_length(Buffer,undefined); -decode_length(Buffer,{VR={_Lb,_Ub},Ext}) when is_list(Ext) -> - case getbit(Buffer) of - {0,Buffer2} -> - decode_length(Buffer2, VR); - {1,Buffer2} -> - decode_length(Buffer2, undefined) - end; -%% {0,Buffer2} = getbit(Buffer), -%% decode_length(Buffer2, VR); - - -%When does this case occur with {_,_Lb,Ub} ?? -% X.691:10.9.3.5 -decode_length({Used,Bin},{_,_Lb,_Ub}) -> %when Len =< 127 -> % Unconstrained or large Ub NOTE! this case does not cover case when Ub > 65535 - Unused = (8-Used) rem 8, - case Bin of - <<_:Used,0:1,Val:7,R:Unused,Rest/binary>> -> - {Val,{Used,<<R,Rest/binary>>}}; - <<_:Used,_:Unused,2:2,Val:14,Rest/binary>> -> - {Val, {0,Rest}}; - <<_:Used,_:Unused,3:2,_:14,_Rest/binary>> -> - exit({error,{asn1,{decode_length,{nyi,length_above_64K}}}}) - end; -% decode_length(Buffer,{_,_Lb,Ub}) -> %when Len =< 127 -> % Unconstrained or large Ub -% case getbit(Buffer) of -% {0,Remain} -> -% getbits(Remain,7); -% {1,Remain} -> -% {Val,Remain2} = getoctets(Buffer,2), -% {Val band 2#0111111111111111, Remain2} -% end; -decode_length(Buffer,SingleValue) when is_integer(SingleValue) -> - {SingleValue,Buffer}. - - - % X.691:11 -encode_boolean(true) -> - {bits,1,1}; -encode_boolean(false) -> - {bits,1,0}; -encode_boolean({Name,Val}) when is_atom(Name) -> - encode_boolean(Val); -encode_boolean(Val) -> - exit({error,{asn1,{encode_boolean,Val}}}). - -decode_boolean(Buffer) -> %when record(Buffer,buffer) - case getbit(Buffer) of - {1,Remain} -> {true,Remain}; - {0,Remain} -> {false,Remain} - end. - - -%% ENUMERATED with extension marker -decode_enumerated(Buffer,C,{Ntup1,Ntup2}) when is_tuple(Ntup1), is_tuple(Ntup2) -> - {Ext,Buffer2} = getext(Buffer), - case Ext of - 0 -> % not an extension value - {Val,Buffer3} = decode_integer(Buffer2,C), - case catch (element(Val+1,Ntup1)) of - NewVal when is_atom(NewVal) -> {NewVal,Buffer3}; - _Error -> exit({error,{asn1,{decode_enumerated,{Val,[Ntup1,Ntup2]}}}}) - end; - 1 -> % this an extension value - {Val,Buffer3} = decode_small_number(Buffer2), - case catch (element(Val+1,Ntup2)) of - NewVal when is_atom(NewVal) -> {NewVal,Buffer3}; - _ -> {{asn1_enum,Val},Buffer3} - end - end; - -decode_enumerated(Buffer,C,NamedNumberTup) when is_tuple(NamedNumberTup) -> - {Val,Buffer2} = decode_integer(Buffer,C), - case catch (element(Val+1,NamedNumberTup)) of - NewVal when is_atom(NewVal) -> {NewVal,Buffer2}; - _Error -> exit({error,{asn1,{decode_enumerated,{Val,NamedNumberTup}}}}) - end. - -%%=============================================================================== -%%=============================================================================== -%%=============================================================================== -%% Bitstring value, ITU_T X.690 Chapter 8.5 -%%=============================================================================== -%%=============================================================================== -%%=============================================================================== - -%%=============================================================================== -%% encode bitstring value -%%=============================================================================== - - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% bitstring NamedBitList -%% Val can be of: -%% - [identifiers] where only named identifers are set to one, -%% the Constraint must then have some information of the -%% bitlength. -%% - [list of ones and zeroes] all bits -%% - integer value representing the bitlist -%% C is constraint Len, only valid when identifiers - - -%% when the value is a list of {Unused,BinBits}, where -%% Unused = integer(), -%% BinBits = binary(). - -encode_bit_string(C,Bin={Unused,BinBits},NamedBitList) when is_integer(Unused), - is_binary(BinBits) -> - encode_bin_bit_string(C,Bin,NamedBitList); - -%% when the value is a list of named bits -encode_bit_string(C, LoNB=[FirstVal | _RestVal], NamedBitList) when is_atom(FirstVal) -> - ToSetPos = get_all_bitposes(LoNB, NamedBitList, []), - BitList = make_and_set_list(ToSetPos,0), - encode_bit_string(C,BitList,NamedBitList); - -encode_bit_string(C, BL=[{bit,_No} | _RestVal], NamedBitList) -> - ToSetPos = get_all_bitposes(BL, NamedBitList, []), - BitList = make_and_set_list(ToSetPos,0), - encode_bit_string(C,BitList,NamedBitList); - -%% when the value is a list of ones and zeroes - -% encode_bit_string(C, BitListValue, NamedBitList) when is_list(BitListValue) -> -% Bl1 = -% case NamedBitList of -% [] -> % dont remove trailing zeroes -% BitListValue; -% _ -> % first remove any trailing zeroes -% lists:reverse(lists:dropwhile(fun(0)->true;(1)->false end, -% lists:reverse(BitListValue))) -% end, -% BitList = [{bit,X} || X <- Bl1], -% %% BListLen = length(BitList), -% case get_constraint(C,'SizeConstraint') of -% 0 -> % fixed length -% []; % nothing to encode -% V when is_integer(V),V=<16 -> % fixed length 16 bits or less -% pad_list(V,BitList); -% V when is_integer(V) -> % fixed length 16 bits or more -% [align,pad_list(V,BitList)]; % should be another case for V >= 65537 -% {Lb,Ub} when is_integer(Lb),is_integer(Ub) -> -% [encode_length({Lb,Ub},length(BitList)),align,BitList]; -% no -> -% [encode_length(undefined,length(BitList)),align,BitList]; -% Sc -> % extension marker -% [encode_length(Sc,length(BitList)),align,BitList] -% end; -encode_bit_string(C, BitListValue, NamedBitList) when is_list(BitListValue) -> - BitListToBinary = - %% fun that transforms a list of 1 and 0 to a tuple: - %% {UnusedBitsInLastByte, Binary} - fun([1|T],Acc,N,Fun) -> - Fun(T,(Acc bsl 1)+1,N+1,Fun); - ([0|T],Acc,N,Fun) -> - Fun(T,(Acc bsl 1),N+1,Fun); - ([_H|_T],_,_,_) -> - exit({error,{asn1,{bitstring_bitlist,BitListValue}}}); - ([],Acc,N,_) -> - Unused = (8 - (N rem 8)) rem 8, - {Unused,<<Acc:N,0:Unused>>} - end, - UnusedAndBin = - case NamedBitList of - [] -> % dont remove trailing zeroes - BitListToBinary(BitListValue,0,0,BitListToBinary); - _ -> - BitListToBinary(lists:reverse( - lists:dropwhile(fun(0)->true;(_)->false end, - lists:reverse(BitListValue))), - 0,0,BitListToBinary) - end, - encode_bin_bit_string(C,UnusedAndBin,NamedBitList); - -%% when the value is an integer -encode_bit_string(C, IntegerVal, NamedBitList) when is_integer(IntegerVal)-> - BitList = int_to_bitlist(IntegerVal), - encode_bit_string(C,BitList,NamedBitList); - -%% when the value is a tuple -encode_bit_string(C,{Name,Val}, NamedBitList) when is_atom(Name) -> - encode_bit_string(C,Val,NamedBitList). - - -%% encode_bin_bit_string/3, when value is a tuple of Unused and BinBits. -%% Unused = integer(),i.e. number unused bits in least sign. byte of -%% BinBits = binary(). - - -encode_bin_bit_string(C,UnusedAndBin={_Unused,_BinBits},NamedBitList) -> - Constr = get_constraint(C,'SizeConstraint'), - UnusedAndBin1 = {Unused1,Bin1} = - remove_trailing_bin(NamedBitList,UnusedAndBin,lower_bound(Constr)), - case Constr of - 0 -> - []; - V when is_integer(V),V=<16 -> - {Unused2,Bin2} = pad_list(V,UnusedAndBin1), - <<BitVal:V,_:Unused2>> = Bin2, - {bits,V,BitVal}; - V when is_integer(V) -> - [align, pad_list(V, UnusedAndBin1)]; - {Lb,Ub} when is_integer(Lb),is_integer(Ub) -> - [encode_length({Lb,Ub},size(Bin1)*8 - Unused1), - align,UnusedAndBin1]; - {{Fix,Fix},L} when is_integer(Fix),is_list(L) -> - %% X.691 � 15.6, the rest of this paragraph is covered by - %% the last, ie. Sc, clause in this case - case (size(Bin1)*8)-Unused1 of - Size when Size =< Fix, Fix =< 16 -> - {Unused2,Bin2} = pad_list(Fix,UnusedAndBin), - <<BitVal:Fix,_:Unused2>> = Bin2, - [{bits,1,0},{bits,Fix,BitVal}]; - Size when Size =< Fix -> - [{bits,1,0},align, pad_list(Fix, UnusedAndBin1)]; - Size -> - [{bits,1,1},encode_length(undefined,Size), - align,UnusedAndBin1] - end; - no -> - [encode_length(undefined,size(Bin1)*8 - Unused1), - align,UnusedAndBin1]; - Sc -> - [encode_length(Sc,size(Bin1)*8 - Unused1), - align,UnusedAndBin1] - end. - - -remove_trailing_bin([], {Unused,Bin},_) -> - {Unused,Bin}; -remove_trailing_bin(_NamedNumberList,{_Unused,<<>>},C) -> - case C of - Int when is_integer(Int),Int > 0 -> - %% this padding see OTP-4353 - pad_list(Int,{0,<<>>}); - _ -> {0,<<>>} - end; -remove_trailing_bin(NamedNumberList, {_Unused,Bin},C) -> - Size = size(Bin)-1, - <<Bfront:Size/binary, LastByte:8>> = Bin, - %% clear the Unused bits to be sure - Unused1 = trailingZeroesInNibble(LastByte band 15), - Unused2 = - case Unused1 of - 4 -> - 4 + trailingZeroesInNibble(LastByte bsr 4); - _ -> Unused1 - end, - case Unused2 of - 8 -> - remove_trailing_bin(NamedNumberList,{0,Bfront},C); - _ -> - case C of - Int when is_integer(Int),Int > ((size(Bin)*8)-Unused2) -> - %% this padding see OTP-4353 - pad_list(Int,{Unused2,Bin}); - _ -> {Unused2,Bin} - end - end. - - -trailingZeroesInNibble(0) -> - 4; -trailingZeroesInNibble(1) -> - 0; -trailingZeroesInNibble(2) -> - 1; -trailingZeroesInNibble(3) -> - 0; -trailingZeroesInNibble(4) -> - 2; -trailingZeroesInNibble(5) -> - 0; -trailingZeroesInNibble(6) -> - 1; -trailingZeroesInNibble(7) -> - 0; -trailingZeroesInNibble(8) -> - 3; -trailingZeroesInNibble(9) -> - 0; -trailingZeroesInNibble(10) -> - 1; -trailingZeroesInNibble(11) -> - 0; -trailingZeroesInNibble(12) -> %#1100 - 2; -trailingZeroesInNibble(13) -> - 0; -trailingZeroesInNibble(14) -> - 1; -trailingZeroesInNibble(15) -> - 0. - -lower_bound({{Lb,_},_}) when is_integer(Lb) -> - Lb; -lower_bound({Lb,_}) when is_integer(Lb) -> - Lb; -lower_bound(C) -> - C. - -%%%%%%%%%%%%%%% -%% The result is presented as a list of named bits (if possible) -%% else as a tuple {Unused,Bits}. Unused is the number of unused -%% bits, least significant bits in the last byte of Bits. Bits is -%% the BIT STRING represented as a binary. -%% -decode_compact_bit_string(Buffer, C, NamedNumberList) -> - case get_constraint(C,'SizeConstraint') of - 0 -> % fixed length - {{8,0},Buffer}; - V when is_integer(V),V=<16 -> %fixed length 16 bits or less - compact_bit_string(Buffer,V,NamedNumberList); - V when is_integer(V),V=<65536 -> %fixed length > 16 bits - Bytes2 = align(Buffer), - compact_bit_string(Bytes2,V,NamedNumberList); - V when is_integer(V) -> % V > 65536 => fragmented value - {Bin,Buffer2} = decode_fragmented_bits(Buffer,V), - case Buffer2 of - {0,_} -> {{0,Bin},Buffer2}; - {U,_} -> {{8-U,Bin},Buffer2} - end; - {Lb,Ub} when is_integer(Lb),is_integer(Ub) -> - %% This case may demand decoding of fragmented length/value - {Len,Bytes2} = decode_length(Buffer,{Lb,Ub}), - Bytes3 = align(Bytes2), - compact_bit_string(Bytes3,Len,NamedNumberList); - no -> - %% This case may demand decoding of fragmented length/value - {Len,Bytes2} = decode_length(Buffer,undefined), - Bytes3 = align(Bytes2), - compact_bit_string(Bytes3,Len,NamedNumberList); - {{Fix,Fix},L} = Sc when is_list(L), is_integer(Fix), Fix =< 16 -> - %% X.691 �15.6, special case of extension marker - case decode_length(Buffer,Sc) of - {Len,Bytes2} when Len > Fix -> - Bytes3 = align(Bytes2), - compact_bit_string(Bytes3,Len,NamedNumberList); - {Len,Bytes2} -> - compact_bit_string(Bytes2,Len,NamedNumberList) - end; - Sc -> - {Len,Bytes2} = decode_length(Buffer,Sc), - Bytes3 = align(Bytes2), - compact_bit_string(Bytes3,Len,NamedNumberList) - end. - - -%%%%%%%%%%%%%%% -%% The result is presented as a list of named bits (if possible) -%% else as a list of 0 and 1. -%% -decode_bit_string(Buffer, C, NamedNumberList) -> - case get_constraint(C,'SizeConstraint') of - {Lb,Ub} when is_integer(Lb),is_integer(Ub) -> - {Len,Bytes2} = decode_length(Buffer,{Lb,Ub}), - Bytes3 = align(Bytes2), - bit_list_or_named(Bytes3,Len,NamedNumberList); - no -> - {Len,Bytes2} = decode_length(Buffer,undefined), - Bytes3 = align(Bytes2), - bit_list_or_named(Bytes3,Len,NamedNumberList); - 0 -> % fixed length - {[],Buffer}; % nothing to encode - V when is_integer(V),V=<16 -> % fixed length 16 bits or less - bit_list_or_named(Buffer,V,NamedNumberList); - V when is_integer(V),V=<65536 -> - Bytes2 = align(Buffer), - bit_list_or_named(Bytes2,V,NamedNumberList); - V when is_integer(V) -> - Bytes2 = align(Buffer), - {BinBits,_} = decode_fragmented_bits(Bytes2,V), - bit_list_or_named(BinBits,V,NamedNumberList); - {{Fix,Fix},L} = Sc when is_list(L), is_integer(Fix), Fix =< 16 -> - %% X.691 �15.6, special case of extension marker - case decode_length(Buffer,Sc) of - {Len,Bytes2} when Len > Fix -> - Bytes3 = align(Bytes2), - bit_list_or_named(Bytes3,Len,NamedNumberList); - {Len,Bytes2} when Len > 16 -> - Bytes3 = align(Bytes2), - bit_list_or_named(Bytes3,Len,NamedNumberList); - {Len,Bytes2} -> - bit_list_or_named(Bytes2,Len,NamedNumberList) - end; - Sc -> %% X.691 �15.6, extension marker - {Len,Bytes2} = decode_length(Buffer,Sc), - Bytes3 = align(Bytes2), - bit_list_or_named(Bytes3,Len,NamedNumberList) - end. - - -%% if no named bits are declared we will return a -%% {Unused,Bits}. Unused = integer(), -%% Bits = binary(). -compact_bit_string(Buffer,Len,[]) -> - getbits_as_binary(Len,Buffer); % {{Unused,BinBits},NewBuffer} -compact_bit_string(Buffer,Len,NamedNumberList) -> - bit_list_or_named(Buffer,Len,NamedNumberList). - - -%% if no named bits are declared we will return a -%% BitList = [0 | 1] - -bit_list_or_named(Buffer,Len,[]) -> - getbits_as_list(Len,Buffer); - -%% if there are named bits declared we will return a named -%% BitList where the names are atoms and unnamed bits represented -%% as {bit,Pos} -%% BitList = [atom() | {bit,Pos}] -%% Pos = integer() - -bit_list_or_named(Buffer,Len,NamedNumberList) -> - {BitList,Rest} = getbits_as_list(Len,Buffer), - {bit_list_or_named1(0,BitList,NamedNumberList,[]), Rest}. - -bit_list_or_named1(Pos,[0|Bt],Names,Acc) -> - bit_list_or_named1(Pos+1,Bt,Names,Acc); -bit_list_or_named1(Pos,[1|Bt],Names,Acc) -> - case lists:keysearch(Pos,2,Names) of - {value,{Name,_}} -> - bit_list_or_named1(Pos+1,Bt,Names,[Name|Acc]); - _ -> - bit_list_or_named1(Pos+1,Bt,Names,[{bit,Pos}|Acc]) - end; -bit_list_or_named1(_,[],_,Acc) -> - lists:reverse(Acc). - - - -%%%%%%%%%%%%%%% -%% - -int_to_bitlist(Int) when is_integer(Int), Int > 0 -> - [Int band 1 | int_to_bitlist(Int bsr 1)]; -int_to_bitlist(0) -> - []. - - -%%%%%%%%%%%%%%%%%% -%% get_all_bitposes([list of named bits to set], named_bit_db, []) -> -%% [sorted_list_of_bitpositions_to_set] - -get_all_bitposes([{bit,ValPos}|Rest], NamedBitList, Ack) -> - get_all_bitposes(Rest, NamedBitList, [ValPos | Ack ]); - -get_all_bitposes([Val | Rest], NamedBitList, Ack) -> - case lists:keysearch(Val, 1, NamedBitList) of - {value, {_ValName, ValPos}} -> - get_all_bitposes(Rest, NamedBitList, [ValPos | Ack]); - _ -> - exit({error,{asn1, {bitstring_namedbit, Val}}}) - end; -get_all_bitposes([], _NamedBitList, Ack) -> - lists:sort(Ack). - -%%%%%%%%%%%%%%%%%% -%% make_and_set_list([list of positions to set to 1])-> -%% returns list with all in SetPos set. -%% in positioning in list the first element is 0, the second 1 etc.., but -%% - -make_and_set_list([XPos|SetPos], XPos) -> - [1 | make_and_set_list(SetPos, XPos + 1)]; -make_and_set_list([Pos|SetPos], XPos) -> - [0 | make_and_set_list([Pos | SetPos], XPos + 1)]; -make_and_set_list([], _) -> - []. - -%%%%%%%%%%%%%%%%% -%% pad_list(N,BitList) -> PaddedList -%% returns a padded (with trailing {bit,0} elements) list of length N -%% if Bitlist contains more than N significant bits set an exit asn1_error -%% is generated - -pad_list(N,In={Unused,Bin}) -> - pad_list(N, size(Bin)*8 - Unused, In). - -pad_list(N,Size,In={_,_}) when N < Size -> - exit({error,{asn1,{range_error,{bit_string,In}}}}); -pad_list(N,Size,{Unused,Bin}) when N > Size, Unused > 0 -> - pad_list(N,Size+1,{Unused-1,Bin}); -pad_list(N,Size,{_Unused,Bin}) when N > Size -> - pad_list(N,Size+1,{7,<<Bin/binary,0>>}); -pad_list(N,N,In={_,_}) -> - In. - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% X.691:16 -%% encode_octet_string(Constraint,ExtensionMarker,Val) -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - -encode_octet_string(C,Val) -> - encode_octet_string2(C,Val). - -encode_octet_string2(C,{_Name,Val}) -> - encode_octet_string2(C,Val); -encode_octet_string2(C,Val) -> - case get_constraint(C,'SizeConstraint') of - 0 -> - []; - 1 -> - [V] = Val, - {bits,8,V}; - 2 -> - [V1,V2] = Val, - [{bits,8,V1},{bits,8,V2}]; - Sv when Sv =<65535, Sv == length(Val) -> % fixed length - {octets,Val}; - {Lb,Ub} -> - [encode_length({Lb,Ub},length(Val)),{octets,Val}]; - Sv when is_list(Sv) -> - [encode_length({hd(Sv),lists:max(Sv)},length(Val)),{octets,Val}]; - no -> - [encode_length(undefined,length(Val)),{octets,Val}] - end. - -decode_octet_string(Bytes,Range) -> - decode_octet_string(Bytes,Range,false). - -decode_octet_string(Bytes,C,false) -> - case get_constraint(C,'SizeConstraint') of - 0 -> - {[],Bytes}; - 1 -> - {B1,Bytes2} = getbits(Bytes,8), - {[B1],Bytes2}; - 2 -> - {Bs,Bytes2}= getbits(Bytes,16), - {binary_to_list(<<Bs:16>>),Bytes2}; - {_,0} -> - {[],Bytes}; - Sv when is_integer(Sv), Sv =<65535 -> % fixed length - getoctets_as_list(Bytes,Sv); - Sv when is_integer(Sv) -> % fragmented encoding - Bytes2 = align(Bytes), - decode_fragmented_octets(Bytes2,Sv); - {Lb,Ub} -> - {Len,Bytes2} = decode_length(Bytes,{Lb,Ub}), - getoctets_as_list(Bytes2,Len); - Sv when is_list(Sv) -> - {Len,Bytes2} = decode_length(Bytes,{hd(Sv),lists:max(Sv)}), - getoctets_as_list(Bytes2,Len); - no -> - {Len,Bytes2} = decode_length(Bytes,undefined), - getoctets_as_list(Bytes2,Len) - end. - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% Restricted char string types -%% (NumericString, PrintableString,VisibleString,IA5String,BMPString,UniversalString) -%% X.691:26 and X.680:34-36 -%%encode_restricted_string(aligned,'BMPString',Constraints,Extension,Val) - - -encode_restricted_string(aligned,{Name,Val}) when is_atom(Name) -> - encode_restricted_string(aligned,Val); - -encode_restricted_string(aligned,Val) when is_list(Val)-> - [encode_length(undefined,length(Val)),{octets,Val}]. - -encode_known_multiplier_string(aligned,StringType,C,_Ext,{Name,Val}) when is_atom(Name) -> - encode_known_multiplier_string(aligned,StringType,C,false,Val); - -encode_known_multiplier_string(aligned,StringType,C,_Ext,Val) -> - Result = chars_encode(C,StringType,Val), - NumBits = get_NumBits(C,StringType), - case get_constraint(C,'SizeConstraint') of - Ub when is_integer(Ub), Ub*NumBits =< 16 -> - Result; - 0 -> - []; - Ub when is_integer(Ub),Ub =<65535 -> % fixed length - [align,Result]; - {Ub,Lb} -> - [encode_length({Ub,Lb},length(Val)),align,Result]; - Vl when is_list(Vl) -> - [encode_length({lists:min(Vl),lists:max(Vl)},length(Val)),align,Result]; - no -> - [encode_length(undefined,length(Val)),align,Result] - end. - -decode_restricted_string(Bytes,aligned) -> - {Len,Bytes2} = decode_length(Bytes,undefined), - getoctets_as_list(Bytes2,Len). - -decode_known_multiplier_string(Bytes,aligned,StringType,C,_Ext) -> - NumBits = get_NumBits(C,StringType), - case get_constraint(C,'SizeConstraint') of - Ub when is_integer(Ub), Ub*NumBits =< 16 -> - chars_decode(Bytes,NumBits,StringType,C,Ub); - Ub when is_integer(Ub),Ub =<65535 -> % fixed length - Bytes1 = align(Bytes), - chars_decode(Bytes1,NumBits,StringType,C,Ub); - 0 -> - {[],Bytes}; - Vl when is_list(Vl) -> - {Len,Bytes1} = decode_length(Bytes,{hd(Vl),lists:max(Vl)}), - Bytes2 = align(Bytes1), - chars_decode(Bytes2,NumBits,StringType,C,Len); - no -> - {Len,Bytes1} = decode_length(Bytes,undefined), - Bytes2 = align(Bytes1), - chars_decode(Bytes2,NumBits,StringType,C,Len); - {Lb,Ub}-> - {Len,Bytes1} = decode_length(Bytes,{Lb,Ub}), - Bytes2 = align(Bytes1), - chars_decode(Bytes2,NumBits,StringType,C,Len) - end. - - -encode_NumericString(C,Val) -> - encode_known_multiplier_string(aligned,'NumericString',C,false,Val). -decode_NumericString(Bytes,C) -> - decode_known_multiplier_string(Bytes,aligned,'NumericString',C,false). - -encode_PrintableString(C,Val) -> - encode_known_multiplier_string(aligned,'PrintableString',C,false,Val). -decode_PrintableString(Bytes,C) -> - decode_known_multiplier_string(Bytes,aligned,'PrintableString',C,false). - -encode_VisibleString(C,Val) -> % equivalent with ISO646String - encode_known_multiplier_string(aligned,'VisibleString',C,false,Val). -decode_VisibleString(Bytes,C) -> - decode_known_multiplier_string(Bytes,aligned,'VisibleString',C,false). - -encode_IA5String(C,Val) -> - encode_known_multiplier_string(aligned,'IA5String',C,false,Val). -decode_IA5String(Bytes,C) -> - decode_known_multiplier_string(Bytes,aligned,'IA5String',C,false). - -encode_BMPString(C,Val) -> - encode_known_multiplier_string(aligned,'BMPString',C,false,Val). -decode_BMPString(Bytes,C) -> - decode_known_multiplier_string(Bytes,aligned,'BMPString',C,false). - -encode_UniversalString(C,Val) -> - encode_known_multiplier_string(aligned,'UniversalString',C,false,Val). -decode_UniversalString(Bytes,C) -> - decode_known_multiplier_string(Bytes,aligned,'UniversalString',C,false). - - -%% end of known-multiplier strings for which PER visible constraints are -%% applied - -encode_GeneralString(_C,Val) -> - encode_restricted_string(aligned,Val). -decode_GeneralString(Bytes,_C) -> - decode_restricted_string(Bytes,aligned). - -encode_GraphicString(_C,Val) -> - encode_restricted_string(aligned,Val). -decode_GraphicString(Bytes,_C) -> - decode_restricted_string(Bytes,aligned). - -encode_ObjectDescriptor(_C,Val) -> - encode_restricted_string(aligned,Val). -decode_ObjectDescriptor(Bytes) -> - decode_restricted_string(Bytes,aligned). - -encode_TeletexString(_C,Val) -> % equivalent with T61String - encode_restricted_string(aligned,Val). -decode_TeletexString(Bytes,_C) -> - decode_restricted_string(Bytes,aligned). - -encode_VideotexString(_C,Val) -> - encode_restricted_string(aligned,Val). -decode_VideotexString(Bytes,_C) -> - decode_restricted_string(Bytes,aligned). - - - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% getBMPChars(Bytes,Len) ->{BMPcharList,RemainingBytes} -%% -getBMPChars(Bytes,1) -> - {O1,Bytes2} = getbits(Bytes,8), - {O2,Bytes3} = getbits(Bytes2,8), - if - O1 == 0 -> - {[O2],Bytes3}; - true -> - {[{0,0,O1,O2}],Bytes3} - end; -getBMPChars(Bytes,Len) -> - getBMPChars(Bytes,Len,[]). - -getBMPChars(Bytes,0,Acc) -> - {lists:reverse(Acc),Bytes}; -getBMPChars(Bytes,Len,Acc) -> - {Octs,Bytes1} = getoctets_as_list(Bytes,2), - case Octs of - [0,O2] -> - getBMPChars(Bytes1,Len-1,[O2|Acc]); - [O1,O2]-> - getBMPChars(Bytes1,Len-1,[{0,0,O1,O2}|Acc]) - end. - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% chars_encode(C,StringType,Value) -> ValueList -%% -%% encodes chars according to the per rules taking the constraint PermittedAlphabet -%% into account. -%% This function does only encode the value part and NOT the length - -chars_encode(C,StringType,Value) -> - case {StringType,get_constraint(C,'PermittedAlphabet')} of - {'UniversalString',{_,_Sv}} -> - exit({error,{asn1,{'not implemented',"UniversalString with PermittedAlphabet constraint"}}}); - {'BMPString',{_,_Sv}} -> - exit({error,{asn1,{'not implemented',"BMPString with PermittedAlphabet constraint"}}}); - _ -> - {NumBits,CharOutTab} = {get_NumBits(C,StringType),get_CharOutTab(C,StringType)}, - chars_encode2(Value,NumBits,CharOutTab) - end. - -chars_encode2([H|T],NumBits,{Min,Max,notab}) when H =< Max, H >= Min -> - [{bits,NumBits,H-Min}|chars_encode2(T,NumBits,{Min,Max,notab})]; -chars_encode2([H|T],NumBits,{Min,Max,Tab}) when H =< Max, H >= Min -> - [{bits,NumBits,exit_if_false(H,element(H-Min+1,Tab))}|chars_encode2(T,NumBits,{Min,Max,Tab})]; -chars_encode2([{A,B,C,D}|T],NumBits,{Min,Max,notab}) -> - %% no value range check here (ought to be, but very expensive) -% [{bits,NumBits,(A*B*C*D)-Min}|chars_encode2(T,NumBits,{Min,Max,notab})]; - [{bits,NumBits,((((((A bsl 8)+B) bsl 8)+C) bsl 8)+D)-Min}|chars_encode2(T,NumBits,{Min,Max,notab})]; -chars_encode2([{A,B,C,D}|T],NumBits,{Min,Max,Tab}) -> - %% no value range check here (ought to be, but very expensive) -% [{bits,NumBits,element((A*B*C*D)-Min,Tab)}|chars_encode2(T,NumBits,{Min,Max,notab})]; - [{bits,NumBits,exit_if_false({A,B,C,D},element(((((((A bsl 8)+B) bsl 8)+C) bsl 8)+D)-Min,Tab))}|chars_encode2(T,NumBits,{Min,Max,notab})]; -chars_encode2([H|_T],_,{_,_,_}) -> - exit({error,{asn1,{illegal_char_value,H}}}); -chars_encode2([],_,_) -> - []. - -exit_if_false(V,false)-> - exit({error,{asn1,{"illegal value according to Permitted alphabet constraint",V}}}); -exit_if_false(_,V) ->V. - - -get_NumBits(C,StringType) -> - case get_constraint(C,'PermittedAlphabet') of - {'SingleValue',Sv} -> - charbits(length(Sv),aligned); - no -> - case StringType of - 'IA5String' -> - charbits(128,aligned); % 16#00..16#7F - 'VisibleString' -> - charbits(95,aligned); % 16#20..16#7E - 'PrintableString' -> - charbits(74,aligned); % [$\s,$',$(,$),$+,$,,$-,$.,$/,"0123456789",$:,$=,$?,$A..$Z,$a..$z - 'NumericString' -> - charbits(11,aligned); % $ ,"0123456789" - 'UniversalString' -> - 32; - 'BMPString' -> - 16 - end - end. - -%%Maybe used later -%%get_MaxChar(C,StringType) -> -%% case get_constraint(C,'PermittedAlphabet') of -%% {'SingleValue',Sv} -> -%% lists:nth(length(Sv),Sv); -%% no -> -%% case StringType of -%% 'IA5String' -> -%% 16#7F; % 16#00..16#7F -%% 'VisibleString' -> -%% 16#7E; % 16#20..16#7E -%% 'PrintableString' -> -%% $z; % [$\s,$',$(,$),$+,$,,$-,$.,$/,"0123456789",$:,$=,$?,$A..$Z,$a..$z -%% 'NumericString' -> -%% $9; % $ ,"0123456789" -%% 'UniversalString' -> -%% 16#ffffffff; -%% 'BMPString' -> -%% 16#ffff -%% end -%% end. - -%%Maybe used later -%%get_MinChar(C,StringType) -> -%% case get_constraint(C,'PermittedAlphabet') of -%% {'SingleValue',Sv} -> -%% hd(Sv); -%% no -> -%% case StringType of -%% 'IA5String' -> -%% 16#00; % 16#00..16#7F -%% 'VisibleString' -> -%% 16#20; % 16#20..16#7E -%% 'PrintableString' -> -%% $\s; % [$\s,$',$(,$),$+,$,,$-,$.,$/,"0123456789",$:,$=,$?,$A..$Z,$a..$z -%% 'NumericString' -> -%% $\s; % $ ,"0123456789" -%% 'UniversalString' -> -%% 16#00; -%% 'BMPString' -> -%% 16#00 -%% end -%% end. - -get_CharOutTab(C,StringType) -> - get_CharTab(C,StringType,out). - -get_CharInTab(C,StringType) -> - get_CharTab(C,StringType,in). - -get_CharTab(C,StringType,InOut) -> - case get_constraint(C,'PermittedAlphabet') of - {'SingleValue',Sv} -> - get_CharTab2(C,StringType,hd(Sv),lists:max(Sv),Sv,InOut); - no -> - case StringType of - 'IA5String' -> - {0,16#7F,notab}; - 'VisibleString' -> - get_CharTab2(C,StringType,16#20,16#7F,notab,InOut); - 'PrintableString' -> - Chars = lists:sort( - " '()+,-./0123456789:=?ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz"), - get_CharTab2(C,StringType,hd(Chars),lists:max(Chars),Chars,InOut); - 'NumericString' -> - get_CharTab2(C,StringType,16#20,$9," 0123456789",InOut); - 'UniversalString' -> - {0,16#FFFFFFFF,notab}; - 'BMPString' -> - {0,16#FFFF,notab} - end - end. - -get_CharTab2(C,StringType,Min,Max,Chars,InOut) -> - BitValMax = (1 bsl get_NumBits(C,StringType))-1, - if - Max =< BitValMax -> - {0,Max,notab}; - true -> - case InOut of - out -> - {Min,Max,create_char_tab(Min,Chars)}; - in -> - {Min,Max,list_to_tuple(Chars)} - end - end. - -create_char_tab(Min,L) -> - list_to_tuple(create_char_tab(Min,L,0)). -create_char_tab(Min,[Min|T],V) -> - [V|create_char_tab(Min+1,T,V+1)]; -create_char_tab(_Min,[],_V) -> - []; -create_char_tab(Min,L,V) -> - [false|create_char_tab(Min+1,L,V)]. - -%% This very inefficient and should be moved to compiletime -charbits(NumOfChars,aligned) -> - case charbits(NumOfChars) of - 1 -> 1; - 2 -> 2; - B when B =< 4 -> 4; - B when B =< 8 -> 8; - B when B =< 16 -> 16; - B when B =< 32 -> 32 - end. - -charbits(NumOfChars) when NumOfChars =< 2 -> 1; -charbits(NumOfChars) when NumOfChars =< 4 -> 2; -charbits(NumOfChars) when NumOfChars =< 8 -> 3; -charbits(NumOfChars) when NumOfChars =< 16 -> 4; -charbits(NumOfChars) when NumOfChars =< 32 -> 5; -charbits(NumOfChars) when NumOfChars =< 64 -> 6; -charbits(NumOfChars) when NumOfChars =< 128 -> 7; -charbits(NumOfChars) when NumOfChars =< 256 -> 8; -charbits(NumOfChars) when NumOfChars =< 512 -> 9; -charbits(NumOfChars) when NumOfChars =< 1024 -> 10; -charbits(NumOfChars) when NumOfChars =< 2048 -> 11; -charbits(NumOfChars) when NumOfChars =< 4096 -> 12; -charbits(NumOfChars) when NumOfChars =< 8192 -> 13; -charbits(NumOfChars) when NumOfChars =< 16384 -> 14; -charbits(NumOfChars) when NumOfChars =< 32768 -> 15; -charbits(NumOfChars) when NumOfChars =< 65536 -> 16; -charbits(NumOfChars) when is_integer(NumOfChars) -> - 16 + charbits1(NumOfChars bsr 16). - -charbits1(0) -> - 0; -charbits1(NumOfChars) -> - 1 + charbits1(NumOfChars bsr 1). - - -chars_decode(Bytes,_,'BMPString',C,Len) -> - case get_constraint(C,'PermittedAlphabet') of - no -> - getBMPChars(Bytes,Len); - _ -> - exit({error,{asn1, - {'not implemented', - "BMPString with PermittedAlphabet constraint"}}}) - end; -chars_decode(Bytes,NumBits,StringType,C,Len) -> - CharInTab = get_CharInTab(C,StringType), - chars_decode2(Bytes,CharInTab,NumBits,Len). - - -chars_decode2(Bytes,CharInTab,NumBits,Len) -> - chars_decode2(Bytes,CharInTab,NumBits,Len,[]). - -chars_decode2(Bytes,_CharInTab,_NumBits,0,Acc) -> - {lists:reverse(Acc),Bytes}; -chars_decode2(Bytes,{Min,Max,notab},NumBits,Len,Acc) when NumBits > 8 -> - {Char,Bytes2} = getbits(Bytes,NumBits), - Result = - if - Char < 256 -> Char; - true -> - list_to_tuple(binary_to_list(<<Char:32>>)) - end, - chars_decode2(Bytes2,{Min,Max,notab},NumBits,Len -1,[Result|Acc]); -% chars_decode2(Bytes,{Min,Max,notab},NumBits,Len,Acc) when NumBits > 8 -> -% {Char,Bytes2} = getbits(Bytes,NumBits), -% Result = case minimum_octets(Char+Min) of -% [NewChar] -> NewChar; -% [C1,C2] -> {0,0,C1,C2}; -% [C1,C2,C3] -> {0,C1,C2,C3}; -% [C1,C2,C3,C4] -> {C1,C2,C3,C4} -% end, -% chars_decode2(Bytes2,{Min,Max,notab},NumBits,Len -1,[Result|Acc]); -chars_decode2(Bytes,{Min,Max,notab},NumBits,Len,Acc) -> - {Char,Bytes2} = getbits(Bytes,NumBits), - chars_decode2(Bytes2,{Min,Max,notab},NumBits,Len -1,[Char+Min|Acc]); - -%% BMPString and UniversalString with PermittedAlphabet is currently not supported -chars_decode2(Bytes,{Min,Max,CharInTab},NumBits,Len,Acc) -> - {Char,Bytes2} = getbits(Bytes,NumBits), - chars_decode2(Bytes2,{Min,Max,CharInTab},NumBits,Len -1,[element(Char+1,CharInTab)|Acc]). - - -%% UTF8String -encode_UTF8String(Val) when is_binary(Val) -> - [encode_length(undefined,size(Val)),{octets,Val}]; -encode_UTF8String(Val) -> - Bin = list_to_binary(Val), - encode_UTF8String(Bin). - -decode_UTF8String(Bytes) -> - {Len,Bytes2} = decode_length(Bytes,undefined), - {Octs,Bytes3} = getoctets_as_list(Bytes2,Len), - {list_to_binary(Octs),Bytes3}. - - - % X.691:17 -encode_null(_) -> []. % encodes to nothing -%encode_null({Name,Val}) when is_atom(Name) -> -% encode_null(Val). - -decode_null(Bytes) -> - {'NULL',Bytes}. - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% encode_object_identifier(Val) -> CompleteList -%% encode_object_identifier({Name,Val}) -> CompleteList -%% Val -> {Int1,Int2,...,IntN} % N >= 2 -%% Name -> atom() -%% Int1 -> integer(0..2) -%% Int2 -> integer(0..39) when Int1 (0..1) else integer() -%% Int3-N -> integer() -%% CompleteList -> [{bits,8,Val}|{octets,Ol}|align|...] -%% -encode_object_identifier({Name,Val}) when is_atom(Name) -> - encode_object_identifier(Val); -encode_object_identifier(Val) -> - OctetList = e_object_identifier(Val), - Octets = list_to_binary(OctetList), % performs a flatten at the same time - [{debug,object_identifier},encode_length(undefined,size(Octets)),{octets,Octets}]. - -%% This code is copied from asn1_encode.erl (BER) and corrected and modified - -e_object_identifier({'OBJECT IDENTIFIER',V}) -> - e_object_identifier(V); -e_object_identifier({Cname,V}) when is_atom(Cname),is_tuple(V) -> - e_object_identifier(tuple_to_list(V)); -e_object_identifier({Cname,V}) when is_atom(Cname),is_list(V) -> - e_object_identifier(V); -e_object_identifier(V) when is_tuple(V) -> - e_object_identifier(tuple_to_list(V)); - -%% E1 = 0|1|2 and (E2 < 40 when E1 = 0|1) -e_object_identifier([E1,E2|Tail]) when E1 >= 0, E1 < 2, E2 < 40 ; E1==2 -> - Head = 40*E1 + E2, % weird - e_object_elements([Head|Tail],[]); -e_object_identifier(Oid=[_,_|_Tail]) -> - exit({error,{asn1,{'illegal_value',Oid}}}). - -e_object_elements([],Acc) -> - lists:reverse(Acc); -e_object_elements([H|T],Acc) -> - e_object_elements(T,[e_object_element(H)|Acc]). - -e_object_element(Num) when Num < 128 -> - [Num]; -e_object_element(Num) -> - [e_o_e(Num bsr 7)|[Num band 2#1111111]]. -e_o_e(Num) when Num < 128 -> - Num bor 2#10000000; -e_o_e(Num) -> - [e_o_e(Num bsr 7)|[(Num band 2#1111111) bor 2#10000000]]. - - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% decode_object_identifier(Bytes) -> {ObjId,RemainingBytes} -%% ObjId -> {integer(),integer(),...} % at least 2 integers -%% RemainingBytes -> [integer()] when integer() (0..255) -decode_object_identifier(Bytes) -> - {Len,Bytes2} = decode_length(Bytes,undefined), - {Octs,Bytes3} = getoctets_as_list(Bytes2,Len), - [First|Rest] = dec_subidentifiers(Octs,0,[]), - Idlist = if - First < 40 -> - [0,First|Rest]; - First < 80 -> - [1,First - 40|Rest]; - true -> - [2,First - 80|Rest] - end, - {list_to_tuple(Idlist),Bytes3}. - -dec_subidentifiers([H|T],Av,Al) when H >=16#80 -> - dec_subidentifiers(T,(Av bsl 7) + (H band 16#7F),Al); -dec_subidentifiers([H|T],Av,Al) -> - dec_subidentifiers(T,0,[(Av bsl 7) + H |Al]); -dec_subidentifiers([],_Av,Al) -> - lists:reverse(Al). - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% encode_relative_oid(Val) -> CompleteList -%% encode_relative_oid({Name,Val}) -> CompleteList -encode_relative_oid({Name,Val}) when is_atom(Name) -> - encode_relative_oid(Val); -encode_relative_oid(Val) when is_tuple(Val) -> - encode_relative_oid(tuple_to_list(Val)); -encode_relative_oid(Val) when is_list(Val) -> - Octets = list_to_binary([e_object_element(X)||X <- Val]), - [encode_length(undefined,size(Octets)),{octets,Octets}]. - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% decode_relative_oid(Val) -> {ROID,Rest} -%% decode_relative_oid({Name,Val}) -> {ROID,Rest} -decode_relative_oid(Bytes) -> - {Len,Bytes2} = decode_length(Bytes,undefined), - {Octs,Bytes3} = getoctets_as_list(Bytes2,Len), - ObjVals = dec_subidentifiers(Octs,0,[]), - {list_to_tuple(ObjVals),Bytes3}. - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% encode_real(Val) -> CompleteList -%% encode_real({Name,Val}) -> CompleteList -encode_real({Name,Val}) when is_atom(Name) -> - encode_real(Val); -encode_real(Real) -> - {EncVal,Len} = ?RT_COMMON:encode_real([],Real), - [encode_length(undefined,Len),{octets,EncVal}]. - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% decode_real(Val) -> {REALvalue,Rest} -%% decode_real({Name,Val}) -> {REALvalue,Rest} -decode_real(Bytes) -> - {Len,{0,Bytes2}} = decode_length(Bytes,undefined), - {RealVal,Rest,Len} = ?RT_COMMON:decode_real(Bytes2,Len), - {RealVal,{0,Rest}}. - - -get_constraint([{Key,V}],Key) -> - V; -get_constraint([],_Key) -> - no; -get_constraint(C,Key) -> - case lists:keysearch(Key,1,C) of - false -> - no; - {value,{_,V}} -> - V - end. - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% complete(InList) -> ByteList -%% Takes a coded list with bits and bytes and converts it to a list of bytes -%% Should be applied as the last step at encode of a complete ASN.1 type -%% - -% complete(L) -> -% case complete1(L) of -% {[],0} -> -% <<0>>; -% {Acc,0} -> -% lists:reverse(Acc); -% {[Hacc|Tacc],Acclen} -> % Acclen >0 -% Rest = 8 - Acclen, -% NewHacc = Hacc bsl Rest, -% lists:reverse([NewHacc|Tacc]) -% end. - - -% complete1(InList) when is_list(InList) -> -% complete1(InList,[]); -% complete1(InList) -> -% complete1([InList],[]). - -% complete1([{debug,_}|T], Acc) -> -% complete1(T,Acc); -% complete1([H|T],Acc) when is_list(H) -> -% {NewH,NewAcclen} = complete1(H,Acc), -% complete1(T,NewH,NewAcclen); - -% complete1([{0,Bin}|T],Acc,0) when is_binary(Bin) -> -% complete1(T,[Bin|Acc],0); -% complete1([{Unused,Bin}|T],Acc,0) when is_integer(Unused),is_binary(Bin) -> -% Size = size(Bin)-1, -% <<Bs:Size/binary,B>> = Bin, -% complete1(T,[(B bsr Unused),Bs|Acc],8-Unused); -% complete1([{Unused,Bin}|T],[Hacc|Tacc],Acclen) when is_integer(Unused),is_binary(Bin) -> -% Rest = 8 - Acclen, -% Used = 8 - Unused, -% case size(Bin) of -% 1 -> -% if -% Rest >= Used -> -% <<B:Used,_:Unused>> = Bin, -% complete1(T,[(Hacc bsl Used) + B|Tacc], -% (Acclen+Used) rem 8); -% true -> -% LeftOver = 8 - Rest - Unused, -% <<Val2:Rest,Val1:LeftOver,_:Unused>> = Bin, -% complete1(T,[Val1,(Hacc bsl Rest) + Val2|Tacc], -% (Acclen+Used) rem 8) -% end; -% N -> -% if -% Rest == Used -> -% N1 = N - 1, -% <<B:Rest,Bs:N1/binary,_:Unused>> = Bin, -% complete1(T,[Bs,(Hacc bsl Rest) + B|Tacc],0); -% Rest > Used -> -% N1 = N - 2, -% N2 = (8 - Rest) + Used, -% <<B1:Rest,Bytes:N1/binary,B2:N2,_:Unused>> = Bin, -% complete1(T,[B2,Bytes,(Hacc bsl Rest) + B1|Tacc], -% (Acclen + Used) rem 8); -% true -> % Rest < Used -% N1 = N - 1, -% N2 = Used - Rest, -% <<B1:Rest,Bytes:N1/binary,B2:N2,_:Unused>> = Bin, -% complete1(T,[B2,Bytes,(Hacc bsl Rest) + B1|Tacc], -% (Acclen + Used) rem 8) -% end -% end; - -% %complete1([{octets,N,Val}|T],Acc,Acclen) when N =< 4 ,is_integer(Val) -> -% % complete1([{octets,<<Val:N/unit:8>>}|T],Acc,Acclen); -% complete1([{octets,N,Val}|T],Acc,Acclen) when N =< 4 ,is_integer(Val) -> -% Newval = case N of -% 1 -> -% Val4 = Val band 16#FF, -% [Val4]; -% 2 -> -% Val3 = (Val bsr 8) band 16#FF, -% Val4 = Val band 16#FF, -% [Val3,Val4]; -% 3 -> -% Val2 = (Val bsr 16) band 16#FF, -% Val3 = (Val bsr 8) band 16#FF, -% Val4 = Val band 16#FF, -% [Val2,Val3,Val4]; -% 4 -> -% Val1 = (Val bsr 24) band 16#FF, -% Val2 = (Val bsr 16) band 16#FF, -% Val3 = (Val bsr 8) band 16#FF, -% Val4 = Val band 16#FF, -% [Val1,Val2,Val3,Val4] -% end, -% complete1([{octets,Newval}|T],Acc,Acclen); - -% complete1([{octets,Bin}|T],Acc,Acclen) when is_binary(Bin) -> -% Rest = 8 - Acclen, -% if -% Rest == 8 -> -% complete1(T,[Bin|Acc],0); -% true -> -% [Hacc|Tacc]=Acc, -% complete1(T,[Bin, Hacc bsl Rest|Tacc],0) -% end; - -% complete1([{octets,Oct}|T],Acc,Acclen) when is_list(Oct) -> -% Rest = 8 - Acclen, -% if -% Rest == 8 -> -% complete1(T,[list_to_binary(Oct)|Acc],0); -% true -> -% [Hacc|Tacc]=Acc, -% complete1(T,[list_to_binary(Oct), Hacc bsl Rest|Tacc],0) -% end; - -% complete1([{bit,Val}|T], Acc, Acclen) -> -% complete1([{bits,1,Val}|T],Acc,Acclen); -% complete1([{octet,Val}|T], Acc, Acclen) -> -% complete1([{octets,1,Val}|T],Acc,Acclen); - -% complete1([{bits,N,Val}|T], Acc, 0) when N =< 8 -> -% complete1(T,[Val|Acc],N); -% complete1([{bits,N,Val}|T], [Hacc|Tacc], Acclen) when N =< 8 -> -% Rest = 8 - Acclen, -% if -% Rest >= N -> -% complete1(T,[(Hacc bsl N) + Val|Tacc],(Acclen+N) rem 8); -% true -> -% Diff = N - Rest, -% NewHacc = (Hacc bsl Rest) + (Val bsr Diff), -% Mask = element(Diff,{1,3,7,15,31,63,127,255}), -% complete1(T,[(Val band Mask),NewHacc|Tacc],(Acclen+N) rem 8) -% end; -% complete1([{bits,N,Val}|T], Acc, Acclen) -> % N > 8 -% complete1([{bits,N-8,Val bsr 8},{bits,8,Val band 255}|T],Acc,Acclen); - -% complete1([align|T],Acc,0) -> -% complete1(T,Acc,0); -% complete1([align|T],[Hacc|Tacc],Acclen) -> -% Rest = 8 - Acclen, -% complete1(T,[Hacc bsl Rest|Tacc],0); -% complete1([{octets,N,Val}|T],Acc,Acclen) when is_list(Val) -> % no security check here -% complete1([{octets,Val}|T],Acc,Acclen); - -% complete1([],Acc,Acclen) -> -% {Acc,Acclen}. - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% complete(InList) -> ByteList -%% Takes a coded list with bits and bytes and converts it to a list of bytes -%% Should be applied as the last step at encode of a complete ASN.1 type -%% - -complete(L) -> - case complete1(L) of - {[],[]} -> - <<0>>; - {Acc,[]} -> - Acc; - {Acc,Bacc} -> - [Acc|complete_bytes(Bacc)] - end. - -%% this function builds the ugly form of lists [E1|E2] to avoid having to reverse it at the end. -%% this is done because it is efficient and that the result always will be sent on a port or -%% converted by means of list_to_binary/1 -complete1(InList) when is_list(InList) -> - complete1(InList,[],[]); -complete1(InList) -> - complete1([InList],[],[]). - -complete1([],Acc,Bacc) -> - {Acc,Bacc}; -complete1([H|T],Acc,Bacc) when is_list(H) -> - {NewH,NewBacc} = complete1(H,Acc,Bacc), - complete1(T,NewH,NewBacc); - -complete1([{octets,Bin}|T],Acc,[]) -> - complete1(T,[Acc|Bin],[]); - -complete1([{octets,Bin}|T],Acc,Bacc) -> - complete1(T,[Acc|[complete_bytes(Bacc),Bin]],[]); - -complete1([{debug,_}|T], Acc,Bacc) -> - complete1(T,Acc,Bacc); - -complete1([{bits,N,Val}|T],Acc,Bacc) -> - complete1(T,Acc,complete_update_byte(Bacc,Val,N)); - -complete1([{bit,Val}|T],Acc,Bacc) -> - complete1(T,Acc,complete_update_byte(Bacc,Val,1)); - -complete1([align|T],Acc,[]) -> - complete1(T,Acc,[]); -complete1([align|T],Acc,Bacc) -> - complete1(T,[Acc|complete_bytes(Bacc)],[]); -complete1([{0,Bin}|T],Acc,[]) when is_binary(Bin) -> - complete1(T,[Acc|Bin],[]); -complete1([{Unused,Bin}|T],Acc,[]) when is_integer(Unused),is_binary(Bin) -> - Size = size(Bin)-1, - <<Bs:Size/binary,B>> = Bin, - NumBits = 8-Unused, - complete1(T,[Acc|Bs],[[B bsr Unused]|NumBits]); -complete1([{Unused,Bin}|T],Acc,Bacc) when is_integer(Unused),is_binary(Bin) -> - Size = size(Bin)-1, - <<Bs:Size/binary,B>> = Bin, - NumBits = 8 - Unused, - Bf = complete_bytes(Bacc), - complete1(T,[Acc|[Bf,Bs]],[[B bsr Unused]|NumBits]). - - -complete_update_byte([],Val,Len) -> - complete_update_byte([[0]|0],Val,Len); -complete_update_byte([[Byte|Bacc]|NumBits],Val,Len) when NumBits + Len == 8 -> - [[0,((Byte bsl Len) + Val) band 255|Bacc]|0]; -complete_update_byte([[Byte|Bacc]|NumBits],Val,Len) when NumBits + Len > 8 -> - Rem = 8 - NumBits, - Rest = Len - Rem, - complete_update_byte([[0,((Byte bsl Rem) + (Val bsr Rest)) band 255 |Bacc]|0],Val,Rest); -complete_update_byte([[Byte|Bacc]|NumBits],Val,Len) -> - [[((Byte bsl Len) + Val) band 255|Bacc]|NumBits+Len]. - - -complete_bytes([[_Byte|Bacc]|0]) -> - lists:reverse(Bacc); -complete_bytes([[Byte|Bacc]|NumBytes]) -> - lists:reverse([(Byte bsl (8-NumBytes)) band 255|Bacc]); -complete_bytes([]) -> - []. - -% complete_bytes(L) -> -% complete_bytes1(lists:reverse(L),[],[],0,0). - -% complete_bytes1([H={V,B}|T],Acc,ReplyAcc,NumBits,NumFields) when ((NumBits+B) rem 8) == 0 -> -% NewReplyAcc = [complete_bytes2([H|Acc],0)|ReplyAcc], -% complete_bytes1(T,[],NewReplyAcc,0,0); -% complete_bytes1([H={V,B}|T],Acc,ReplyAcc,NumBits,NumFields) when NumFields == 7; (NumBits+B) div 8 > 0 -> -% Rem = (NumBits+B) rem 8, -% NewReplyAcc = [complete_bytes2([{V bsr Rem,B - Rem}|Acc],0)|ReplyAcc], -% complete_bytes1([{V,Rem}|T],[],NewReplyAcc,0,0); -% complete_bytes1([H={V,B}|T],Acc,ReplyAcc,NumBits,NumFields) -> -% complete_bytes1(T,[H|Acc],ReplyAcc,NumBits+B,NumFields+1); -% complete_bytes1([],[],ReplyAcc,_,_) -> -% lists:reverse(ReplyAcc); -% complete_bytes1([],Acc,ReplyAcc,NumBits,_) -> -% PadBits = case NumBits rem 8 of -% 0 -> 0; -% Rem -> 8 - Rem -% end, -% lists:reverse([complete_bytes2(Acc,PadBits)|ReplyAcc]). - - -% complete_bytes2([{V1,B1}],PadBits) -> -% <<V1:B1,0:PadBits>>; -% complete_bytes2([{V2,B2},{V1,B1}],PadBits) -> -% <<V1:B1,V2:B2,0:PadBits>>; -% complete_bytes2([{V3,B3},{V2,B2},{V1,B1}],PadBits) -> -% <<V1:B1,V2:B2,V3:B3,0:PadBits>>; -% complete_bytes2([{V4,B4},{V3,B3},{V2,B2},{V1,B1}],PadBits) -> -% <<V1:B1,V2:B2,V3:B3,V4:B4,0:PadBits>>; -% complete_bytes2([{V5,B5},{V4,B4},{V3,B3},{V2,B2},{V1,B1}],PadBits) -> -% <<V1:B1,V2:B2,V3:B3,V4:B4,V5:B5,0:PadBits>>; -% complete_bytes2([{V6,B6},{V5,B5},{V4,B4},{V3,B3},{V2,B2},{V1,B1}],PadBits) -> -% <<V1:B1,V2:B2,V3:B3,V4:B4,V5:B5,V6:B6,0:PadBits>>; -% complete_bytes2([{V7,B7},{V6,B6},{V5,B5},{V4,B4},{V3,B3},{V2,B2},{V1,B1}],PadBits) -> -% <<V1:B1,V2:B2,V3:B3,V4:B4,V5:B5,V6:B6,V7:B7,0:PadBits>>; -% complete_bytes2([{V8,B8},{V7,B7},{V6,B6},{V5,B5},{V4,B4},{V3,B3},{V2,B2},{V1,B1}],PadBits) -> -% <<V1:B1,V2:B2,V3:B3,V4:B4,V5:B5,V6:B6,V7:B7,V8:B8,0:PadBits>>. - - - - - - diff --git a/lib/asn1/src/asn1rt_per_bin_rt2ct.erl b/lib/asn1/src/asn1rt_per_bin_rt2ct.erl index 1df757a47f..5997232f13 100644 --- a/lib/asn1/src/asn1rt_per_bin_rt2ct.erl +++ b/lib/asn1/src/asn1rt_per_bin_rt2ct.erl @@ -22,25 +22,21 @@ -include("asn1_records.hrl"). --export([dec_fixup/3, cindex/3, list_to_record/2]). +-export([decode_fragmented/3]). -export([setchoiceext/1, setext/1, fixoptionals/3, fixextensions/2, - getext/1, getextension/2, skipextensions/3, getbit/1, getchoice/3 ]). --export([getoptionals/2, getoptionals2/2, - set_choice/3, encode_integer/2, encode_integer/3 ]). --export([decode_integer/2, decode_integer/3, encode_small_number/1, - decode_boolean/1, encode_length/2, decode_length/1, decode_length/2, - encode_small_length/1, decode_small_length/1, + skipextensions/3, getbit/1, getchoice/3 ]). +-export([set_choice/3, encode_integer/2, encode_integer/3 ]). +-export([encode_small_number/1, + encode_length/2, + encode_small_length/1, decode_compact_bit_string/3]). --export([decode_enumerated/3, - encode_bit_string/3, decode_bit_string/3 ]). --export([encode_octet_string/2, decode_octet_string/2, - encode_null/1, decode_null/1, +-export([encode_bit_string/3, decode_bit_string/3 ]). +-export([encode_octet_string/2, encode_object_identifier/1, decode_object_identifier/1, encode_real/1, decode_real/1, encode_relative_oid/1, decode_relative_oid/1, complete/1]). - -export([encode_open_type/2, decode_open_type/2]). -export([encode_GeneralString/2, decode_GeneralString/2, @@ -51,19 +47,10 @@ encode_UTF8String/1,decode_UTF8String/1 ]). --export([decode_constrained_number/2, - decode_constrained_number/3, - decode_unconstrained_number/1, - decode_semi_constrained_number/2, - encode_unconstrained_number/1, - decode_constrained_number/4, +-export([encode_unconstrained_number/1, encode_octet_string/3, - decode_octet_string/3, encode_known_multiplier_string/5, - decode_known_multiplier_string/5, - getoctets/2, getbits/2 -% start_drv/1,start_drv2/1,init_drv/1 - ]). + decode_known_multiplier_string/5]). -export([eint_positive/1]). @@ -73,32 +60,6 @@ -define('32K',32768). -define('64K',65536). -%%-define(nodriver,true). - -dec_fixup(Terms,Cnames,RemBytes) -> - dec_fixup(Terms,Cnames,RemBytes,[]). - -dec_fixup([novalue|T],[_Hc|Tc],RemBytes,Acc) -> - dec_fixup(T,Tc,RemBytes,Acc); -dec_fixup([{_Name,novalue}|T],[_Hc|Tc],RemBytes,Acc) -> - dec_fixup(T,Tc,RemBytes,Acc); -dec_fixup([H|T],[Hc|Tc],RemBytes,Acc) -> - dec_fixup(T,Tc,RemBytes,[{Hc,H}|Acc]); -dec_fixup([],_Cnames,RemBytes,Acc) -> - {lists:reverse(Acc),RemBytes}. - -cindex(Ix,Val,Cname) -> - case element(Ix,Val) of - {Cname,Val2} -> Val2; - X -> X - end. - -%% converts a list to a record if necessary -list_to_record(_,Tuple) when is_tuple(Tuple) -> - Tuple; -list_to_record(Name,List) when is_list(List) -> - list_to_tuple([Name|List]). - %%-------------------------------------------------------- %% setchoiceext(InRootSet) -> [{bit,X}] %% X is set to 1 when InRootSet==false @@ -143,15 +104,6 @@ fixoptionals([Pos|Ot],Val,Acc) -> end. -getext(Bytes) when is_bitstring(Bytes) -> - getbit(Bytes). - -getextension(0, Bytes) -> - {<<>>,Bytes}; -getextension(1, Bytes) -> - {Len,Bytes2} = decode_small_length(Bytes), - getbits_as_binary(Len,Bytes2).% {Bin,Bytes3}. - fixextensions({ext,ExtPos,ExtNum},Val) -> case fixextensions(ExtPos,ExtNum+ExtPos,Val,0) of 0 -> []; @@ -194,14 +146,6 @@ getchoice(Bytes,_,1) -> getchoice(Bytes,NumChoices,0) -> decode_constrained_number(Bytes,{0,NumChoices-1}). -%% old version kept for backward compatibility with generates from R7B01 -getoptionals(Bytes,NumOpt) -> - getbits_as_binary(NumOpt,Bytes). - -%% new version used in generates from r8b_patch/3 and later -getoptionals2(Bytes,NumOpt) -> - {_,_} = getbits(Bytes,NumOpt). - %% getbits_as_binary(Num,Bytes) -> {Bin,Rest} %% Num = integer(), @@ -344,32 +288,6 @@ decode_fragmented_bits(<<0:1,Len:7,Bin/binary>>,C,Acc) -> exit({error,{asn1,{illegal_value,C,BinBits}}}) end. - -decode_fragmented_octets(Bin,C) -> - decode_fragmented_octets(Bin,C,[]). - -decode_fragmented_octets(<<3:2,Len:6,Bin/binary>>,C,Acc) -> - {Value,Bin2} = split_binary(Bin,Len * ?'16K'), - decode_fragmented_octets(Bin2,C,[Value|Acc]); -decode_fragmented_octets(<<0:1,0:7,Bin/binary>>,C,Acc) -> - Octets = list_to_binary(lists:reverse(Acc)), - case C of - Int when is_integer(Int), C == size(Octets) -> - {Octets,Bin}; - Int when is_integer(Int) -> - exit({error,{asn1,{illegal_value,C,Octets}}}) - end; -decode_fragmented_octets(<<0:1,Len:7,Bin/binary>>,C,Acc) -> - <<Value:Len/binary-unit:8,Bin2/binary>> = Bin, - BinOctets = list_to_binary(lists:reverse([Value|Acc])), - case C of - Int when is_integer(Int),size(BinOctets) == Int -> - {BinOctets,Bin2}; - Int when is_integer(Int) -> - exit({error,{asn1,{illegal_value,C,BinOctets}}}) - end. - - %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% encode_open_type(Constraint, Value) -> CompleteList @@ -454,40 +372,6 @@ encode_integer(_,Val) -> exit({error,{asn1,{illegal_value,Val}}}). - -decode_integer(Buffer,Range,NamedNumberList) -> - {Val,Buffer2} = decode_integer(Buffer,Range), - case lists:keysearch(Val,2,NamedNumberList) of - {value,{NewVal,_}} -> {NewVal,Buffer2}; - _ -> {Val,Buffer2} - end. - -decode_integer(Buffer,[{Rc,_Ec}]) when is_tuple(Rc) -> - {Ext,Buffer2} = getext(Buffer), - case Ext of - 0 -> decode_integer(Buffer2,[Rc]); - 1 -> decode_unconstrained_number(Buffer2) - end; -decode_integer(Buffer,undefined) -> - decode_unconstrained_number(Buffer); -decode_integer(Buffer,C) -> - case get_constraint(C,'SingleValue') of - V when is_integer(V) -> - {V,Buffer}; - _ -> - decode_integer1(Buffer,C) - end. - -decode_integer1(Buffer,C) -> - case VR = get_constraint(C,'ValueRange') of - no -> - decode_unconstrained_number(Buffer); - {Lb, 'MAX'} -> - decode_semi_constrained_number(Buffer,Lb); - {_Lb,_Ub} -> - decode_constrained_number(Buffer,VR) - end. - %% X.691:10.6 Encoding of a normally small non-negative whole number %% Use this for encoding of CHOICE index if there is an extension marker in %% the CHOICE @@ -507,7 +391,7 @@ decode_small_number(Bytes) -> 0 -> getbits(Bytes2,6); 1 -> - decode_semi_constrained_number(Bytes2,0) + decode_semi_constrained_number(Bytes2) end. %% X.691:10.7 Encoding of a semi-constrained whole number @@ -530,12 +414,10 @@ encode_semi_constrained_number(Lb,Val) -> [encode_length(undefined,Len),[21,<<Len:16>>,Oct]] end. -decode_semi_constrained_number(Bytes,{Lb,_}) -> - decode_semi_constrained_number(Bytes,Lb); -decode_semi_constrained_number(Bytes,Lb) -> +decode_semi_constrained_number(Bytes) -> {Len,Bytes2} = decode_length(Bytes,undefined), {V,Bytes3} = getoctets(Bytes2,Len), - {V+Lb,Bytes3}. + {V,Bytes3}. encode_constrained_number({Lb,_Ub},_Range,{bits,N},Val) -> Val2 = Val-Lb, @@ -609,7 +491,7 @@ encode_constrained_number({Lb,Ub},Val) when Val >= Lb, Ub >= Val -> RangeOcts = binary:encode_unsigned(Range - 1), OctsLen = erlang:byte_size(Octs), RangeOctsLen = erlang:byte_size(RangeOcts), - LengthBitsNeeded = asn1rt_per_bin:minimum_bits(RangeOctsLen - 1), + LengthBitsNeeded = minimum_bits(RangeOctsLen - 1), [10,LengthBitsNeeded,OctsLen-1,20,OctsLen,Octs]; true -> exit({not_supported,{integer_range,Range}}) @@ -621,13 +503,6 @@ decode_constrained_number(Buffer,VR={Lb,Ub}) -> Range = Ub - Lb + 1, decode_constrained_number(Buffer,VR,Range). -decode_constrained_number(Buffer,{Lb,_Ub},_Range,{bits,N}) -> - {Val,Remain} = getbits(Buffer,N), - {Val+Lb,Remain}; -decode_constrained_number(Buffer,{Lb,_Ub},_Range,{octets,N}) -> - {Val,Remain} = getoctets(Buffer,N), - {Val+Lb,Remain}. - decode_constrained_number(Buffer,{Lb,_Ub},Range) -> % Val2 = Val - Lb, {Val,Remain} = @@ -665,6 +540,16 @@ decode_constrained_number(Buffer,{Lb,_Ub},Range) -> end, {Val+Lb,Remain}. +%% For some reason the minimum bits needed in the length field in +%% the encoding of constrained whole numbers must always be at least 2? +minimum_bits(N) when N < 4 -> 2; +minimum_bits(N) when N < 8 -> 3; +minimum_bits(N) when N < 16 -> 4; +minimum_bits(N) when N < 32 -> 5; +minimum_bits(N) when N < 64 -> 6; +minimum_bits(N) when N < 128 -> 7; +minimum_bits(_N) -> 8. + %% X.691:10.8 Encoding of an unconstrained whole number encode_unconstrained_number(Val) when Val >= 0 -> @@ -718,23 +603,6 @@ enint(-1, [B1|T]) when B1 > 127 -> enint(N, Acc) -> enint(N bsr 8, [N band 16#ff|Acc]). -decode_unconstrained_number(Bytes) -> - {Len,Bytes2} = decode_length(Bytes,undefined), - {Ints,Bytes3} = getoctets_as_bin(Bytes2,Len), - {dec_integer(Ints),Bytes3}. - -dec_integer(Bin = <<0:1,_:7,_/binary>>) -> - decpint(Bin); -dec_integer(<<_:1,B:7,BitStr/bitstring>>) -> - Size = bit_size(BitStr), - <<I:Size>> = BitStr, - (-128 + B) bsl bit_size(BitStr) bor I. - -decpint(Bin) -> - Size = bit_size(Bin), - <<Int:Size>> = Bin, - Int. - %% X.691:10.9 Encoding of a length determinant %%encode_small_length(undefined,Len) -> % null means no UpperBound %% encode_small_number(Len). @@ -779,18 +647,6 @@ encode_small_length(Len) -> [1,encode_length(undefined,Len)]. -decode_small_length(Buffer) -> - case getbit(Buffer) of - {0,Remain} -> - {Bits,Remain2} = getbits(Remain,6), - {Bits+1,Remain2}; - {1,Remain} -> - decode_length(Remain,undefined) - end. - -decode_length(Buffer) -> - decode_length(Buffer,undefined). - decode_length(Buffer,undefined) -> % un-constrained case align(Buffer) of <<0:1,Oct:7,Rest/binary>> -> @@ -833,38 +689,6 @@ decode_length(Buffer,SingleValue) when is_integer(SingleValue) -> {SingleValue,Buffer}. - % X.691:11 -decode_boolean(Buffer) -> %when record(Buffer,buffer) - case getbit(Buffer) of - {1,Remain} -> {true,Remain}; - {0,Remain} -> {false,Remain} - end. - - -%% ENUMERATED with extension marker -decode_enumerated(Buffer,C,{Ntup1,Ntup2}) when is_tuple(Ntup1), is_tuple(Ntup2) -> - {Ext,Buffer2} = getext(Buffer), - case Ext of - 0 -> % not an extension value - {Val,Buffer3} = decode_integer(Buffer2,C), - case catch (element(Val+1,Ntup1)) of - NewVal when is_atom(NewVal) -> {NewVal,Buffer3}; - _Error -> exit({error,{asn1,{decode_enumerated,{Val,[Ntup1,Ntup2]}}}}) - end; - 1 -> % this an extension value - {Val,Buffer3} = decode_small_number(Buffer2), - case catch (element(Val+1,Ntup2)) of - NewVal when is_atom(NewVal) -> {NewVal,Buffer3}; - _ -> {{asn1_enum,Val},Buffer3} - end - end; - -decode_enumerated(Buffer,C,NamedNumberTup) when is_tuple(NamedNumberTup) -> - {Val,Buffer2} = decode_integer(Buffer,C), - case catch (element(Val+1,NamedNumberTup)) of - NewVal when is_atom(NewVal) -> {NewVal,Buffer2}; - _Error -> exit({error,{asn1,{decode_enumerated,{Val,NamedNumberTup}}}}) - end. %%=============================================================================== %%=============================================================================== @@ -1315,49 +1139,74 @@ encode_octet_string(SZ={_,_},false,Val) -> % [encode_length(SZ,length(Val)),align, % {octets,Val}]; Len = length(Val), - [encode_length(SZ,Len),2, - octets_to_complete(Len,Val)]; + try + [encode_length(SZ,Len),2, + octets_to_complete(Len,Val)] + catch + exit:{error,{asn1,{encode_length,_}}} -> + encode_fragmented_octet_string(Val) + end; encode_octet_string(SZ,false,Val) when is_list(SZ) -> Len = length(Val), - [encode_length({hd(SZ),lists:max(SZ)},Len),2, - octets_to_complete(Len,Val)]; + try + [encode_length({hd(SZ),lists:max(SZ)},Len),2, + octets_to_complete(Len,Val)] + catch + exit:{error,{asn1,{encode_length,_}}} -> + encode_fragmented_octet_string(Val) + end; +encode_octet_string(Sv,false,Val) when is_integer(Sv) -> + encode_fragmented_octet_string(Val); encode_octet_string(no,false,Val) -> Len = length(Val), - [encode_length(undefined,Len),2, - octets_to_complete(Len,Val)]; + try + [encode_length(undefined,Len),2, + octets_to_complete(Len,Val)] + catch + exit:{error,{asn1,{encode_length,_}}} -> + encode_fragmented_octet_string(Val) + end; encode_octet_string(C,_,_) -> exit({error,{not_implemented,C}}). - -decode_octet_string(Bytes,Range) -> - decode_octet_string(Bytes,Range,false). - -decode_octet_string(<<B1,Bytes/bitstring>>,1,false) -> -%% {B1,Bytes2} = getbits(Bytes,8), - {[B1],Bytes}; -decode_octet_string(<<B1,B2,Bytes/bitstring>>,2,false) -> -%% {Bs,Bytes2}= getbits(Bytes,16), -%% {binary_to_list(<<Bs:16>>),Bytes2}; - {[B1,B2],Bytes}; -decode_octet_string(Bytes,Sv,false) when is_integer(Sv),Sv=<65535 -> - %% Bytes2 = align(Bytes), - %% getoctets_as_list aligns buffer before it picks octets - getoctets_as_list(Bytes,Sv); -decode_octet_string(Bytes,Sv,false) when is_integer(Sv) -> - Bytes2 = align(Bytes), - decode_fragmented_octets(Bytes2,Sv); -decode_octet_string(Bytes,{Lb,Ub},false) -> - {Len,Bytes2} = decode_length(Bytes,{Lb,Ub}), -%% Bytes3 = align(Bytes2), - getoctets_as_list(Bytes2,Len); -decode_octet_string(Bytes,Sv,false) when is_list(Sv) -> - {Len,Bytes2} = decode_length(Bytes,{hd(Sv),lists:max(Sv)}), -%% Bytes3 = align(Bytes2), - getoctets_as_list(Bytes2,Len); -decode_octet_string(Bytes,no,false) -> - {Len,Bytes2} = decode_length(Bytes,undefined), -%% Bytes3 = align(Bytes2), - getoctets_as_list(Bytes2,Len). +encode_fragmented_octet_string(Val) -> + Bin = iolist_to_binary(Val), + efos_1(Bin). + +efos_1(<<B1:16#C000/binary,B2:16#4000/binary,T/binary>>) -> + [20,1,<<3:2,4:6>>, + octets_to_complete(16#C000, B1), + octets_to_complete(16#4000, B2)|efos_1(T)]; +efos_1(<<B:16#C000/binary,T/binary>>) -> + [20,1,<<3:2,3:6>>,octets_to_complete(16#C000, B)|efos_1(T)]; +efos_1(<<B:16#8000/binary,T/binary>>) -> + [20,1,<<3:2,2:6>>,octets_to_complete(16#8000, B)|efos_1(T)]; +efos_1(<<B:16#4000/binary,T/binary>>) -> + [20,1,<<3:2,1:6>>,octets_to_complete(16#4000, B)|efos_1(T)]; +efos_1(<<>>) -> + [20,1,0]; +efos_1(<<B/bitstring>>) -> + Len = byte_size(B), + [encode_length(undefined, Len),octets_to_complete(Len, B)]. + +decode_fragmented(SegSz0, Buf0, Unit) -> + SegSz = SegSz0 * Unit * ?'16K', + <<Res:SegSz/bitstring,Buf/bitstring>> = Buf0, + decode_fragmented_1(Buf, Unit, Res). + +decode_fragmented_1(<<0:1,N:7,Buf0/bitstring>>, Unit, Res) -> + Sz = N*Unit, + <<S:Sz/bitstring,Buf/bitstring>> = Buf0, + {<<Res/bitstring,S/bitstring>>,Buf}; +decode_fragmented_1(<<1:1,0:1,N:14,Buf0/bitstring>>, Unit, Res) -> + Sz = N*Unit, + <<S:Sz/bitstring,Buf/bitstring>> = Buf0, + {<<Res/bitstring,S/bitstring>>,Buf}; +decode_fragmented_1(<<1:1,1:1,SegSz0:6,Buf0/bitstring>>, Unit, Res0) -> + SegSz = SegSz0 * Unit * ?'16K', + <<Frag:SegSz/bitstring,Buf/bitstring>> = Buf0, + Res = <<Res0/bitstring,Frag/bitstring>>, + decode_fragmented_1(Buf, Unit, Res). %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% @@ -1545,16 +1394,6 @@ chars_decode2(Bytes,{Min,Max,CharInTab},NumBits,Len,Acc) -> chars_decode2(Bytes2,{Min,Max,CharInTab},NumBits,Len -1,[element(Char+1,CharInTab)|Acc]). - % X.691:17 -encode_null(_Val) -> []. % encodes to nothing -%encode_null({Name,Val}) when is_atom(Name) -> -% encode_null(Val). - -decode_null(Bytes) -> - {'NULL',Bytes}. - - - %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% encode_UTF8String(Val) -> CompleteList %% Val -> <<utf8encoded binary>> diff --git a/lib/asn1/src/asn1rt_uper_bin.erl b/lib/asn1/src/asn1rt_uper_bin.erl index abe178a69e..9410c3ef90 100644 --- a/lib/asn1/src/asn1rt_uper_bin.erl +++ b/lib/asn1/src/asn1rt_uper_bin.erl @@ -25,22 +25,20 @@ %%-compile(export_all). - -export([cindex/3, list_to_record/2]). - -export([setext/1, fixoptionals/3, +-export([decode_fragmented/3]). +-export([setext/1, fixoptionals/3, fixextensions/2, - getext/1, getextension/2, skipextensions/3, getbit/1, getchoice/3 ]). - -export([getoptionals2/2, set_choice/3, encode_integer/2, encode_integer/3 ]). - -export([decode_integer/2, decode_integer/3, encode_small_number/1, encode_boolean/1, - decode_boolean/1, encode_length/2, decode_length/1, decode_length/2, - encode_small_length/1, decode_small_length/1, + skipextensions/3, getbit/1, getchoice/3 ]). +-export([set_choice/3, encode_integer/2, encode_integer/3]). +-export([encode_small_number/1, encode_boolean/1, + encode_length/2, + encode_small_length/1, decode_compact_bit_string/3]). - -export([decode_enumerated/3, - encode_bit_string/3, decode_bit_string/3 ]). - -export([encode_octet_string/2, decode_octet_string/2, - encode_null/1, decode_null/1, - encode_relative_oid/1, decode_relative_oid/1, +-export([encode_bit_string/3, decode_bit_string/3 ]). +-export([encode_octet_string/2, + encode_relative_oid/1, decode_relative_oid/1, encode_object_identifier/1, decode_object_identifier/1, - encode_real/1, decode_real/1, + encode_real/1, decode_real/1, complete/1, complete_NFP/1]). @@ -65,19 +63,6 @@ -define('64K',65536). -cindex(Ix,Val,Cname) -> - case element(Ix,Val) of - {Cname,Val2} -> Val2; - X -> X - end. - -%% converts a list to a record if necessary -list_to_record(_Name,Tuple) when is_tuple(Tuple) -> - Tuple; -list_to_record(Name,List) when is_list(List) -> - list_to_tuple([Name|List]). - - %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% setext(true|false) -> CompleteList %% @@ -113,16 +98,6 @@ fixoptionals([Pos|Ot],Val,Acc) -> end. -getext(Bytes) when is_bitstring(Bytes) -> - getbit(Bytes). - -getextension(0, Bytes) -> - {{},Bytes}; -getextension(1, Bytes) -> - {Len,Bytes2} = decode_small_length(Bytes), - {Blist, Bytes3} = getbits_as_list(Len,Bytes2), - {list_to_tuple(Blist),Bytes3}. - fixextensions({ext,ExtPos,ExtNum},Val) -> case fixextensions(ExtPos,ExtNum+ExtPos,Val,0) of 0 -> []; @@ -165,11 +140,6 @@ getchoice(Bytes,NumChoices,0) -> decode_constrained_number(Bytes,{0,NumChoices-1}). -%%%%%%%%%%%%%%% -getoptionals2(Bytes,NumOpt) -> - getbits(Bytes,NumOpt). - - %% getbits_as_binary(Num,Bytes) -> {{Unused,BinBits},RestBytes}, %% Num = integer(), %% Bytes = list() | tuple(), @@ -289,33 +259,6 @@ decode_fragmented_bits(<<0:1,Len:7,BitStr/bitstring>>,C,Acc) -> exit({error,{asn1,{illegal_value,C,ResBitStr}}}) end. - -decode_fragmented_octets({0,Bin},C) -> - decode_fragmented_octets(Bin,C,[]). - -decode_fragmented_octets(<<3:2,Len:6,BitStr/bitstring>>,C,Acc) -> - FragLen = Len * ?'16K', - <<Value:FragLen/binary,Rest/bitstring>> = BitStr, - decode_fragmented_octets(Rest,C,[Value|Acc]); -decode_fragmented_octets(<<0:1,0:7,Bin/bitstring>>,C,Acc) -> - Octets = list_to_binary(lists:reverse(Acc)), - case C of - Int when is_integer(Int), C == size(Octets) -> - {Octets,Bin}; - Int when is_integer(Int) -> - exit({error,{asn1,{illegal_value,C,Octets}}}) - end; -decode_fragmented_octets(<<0:1,Len:7,BitStr/bitstring>>,C,Acc) -> - <<Value:Len/binary-unit:8,BitStr2/binary>> = BitStr, - BinOctets = list_to_binary(lists:reverse([Value|Acc])), - case C of - Int when is_integer(Int),size(BinOctets) == Int -> - {BinOctets,BitStr2}; - Int when is_integer(Int) -> - exit({error,{asn1,{illegal_value,C,BinOctets}}}) - end. - - %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% encode_open_type(Constraint, Value) -> CompleteList @@ -398,47 +341,6 @@ encode_integer1(C, Val) -> exit({error,{asn1,{illegal_value,VR,Val}}}) end. -decode_integer(Buffer,Range,NamedNumberList) -> - {Val,Buffer2} = decode_integer(Buffer,Range), - case lists:keysearch(Val,2,NamedNumberList) of - {value,{NewVal,_}} -> {NewVal,Buffer2}; - _ -> {Val,Buffer2} - end. - -decode_integer(Buffer,[{Rc,_Ec}]) when is_tuple(Rc) -> - {Ext,Buffer2} = getext(Buffer), - case Ext of - 0 -> decode_integer(Buffer2,[Rc]); %% Value in root of constraint - 1 -> decode_unconstrained_number(Buffer2) - end; -decode_integer(Buffer,undefined) -> - decode_unconstrained_number(Buffer); -decode_integer(Buffer,C) -> - case get_constraint(C,'SingleValue') of - V when is_integer(V) -> - {V,Buffer}; - V when is_list(V) -> - {Val,Buffer2} = decode_integer1(Buffer,C), - case lists:member(Val,V) of - true -> - {Val,Buffer2}; - _ -> - exit({error,{asn1,{illegal_value,Val}}}) - end; - _ -> - decode_integer1(Buffer,C) - end. - -decode_integer1(Buffer,C) -> - case VR = get_constraint(C,'ValueRange') of - no -> - decode_unconstrained_number(Buffer); - {Lb, 'MAX'} -> - decode_semi_constrained_number(Buffer,Lb); - {_,_} -> - decode_constrained_number(Buffer,VR) - end. - %% X.691:10.6 Encoding of a normally small non-negative whole number %% Use this for encoding of CHOICE index if there is an extension marker in %% the CHOICE @@ -455,7 +357,7 @@ decode_small_number(Bytes) -> 0 -> getbits(Bytes2,6); 1 -> - decode_semi_constrained_number(Bytes2,0) + decode_semi_constrained_number(Bytes2) end. %% X.691:10.7 Encoding of a semi-constrained whole number @@ -479,12 +381,10 @@ encode_semi_constrained_number(Lb,Val) -> [encode_length(undefined,Size),Bin] end. -decode_semi_constrained_number(Bytes,{Lb,_}) -> - decode_semi_constrained_number(Bytes,Lb); -decode_semi_constrained_number(Bytes,Lb) -> +decode_semi_constrained_number(Bytes) -> {Len,Bytes2} = decode_length(Bytes,undefined), {V,Bytes3} = getoctets(Bytes2,Len), - {V+Lb,Bytes3}. + {V,Bytes3}. encode_constrained_number(Range,{Name,Val}) when is_atom(Name) -> encode_constrained_number(Range,Val); @@ -566,23 +466,6 @@ enint(-1, [B1|T]) when B1 > 127 -> enint(N, Acc) -> enint(N bsr 8, [N band 16#ff|Acc]). -decode_unconstrained_number(Bytes) -> - {Len,Bytes2} = decode_length(Bytes,undefined), - {Ints,Bytes3} = getoctets_as_bin(Bytes2,Len), - {dec_integer(Ints),Bytes3}. - -dec_integer(Bin = <<0:1,_:7,_/bitstring>>) -> - decpint(Bin); -dec_integer(<<_:1,B:7,BitStr/bitstring>>) -> - Size = bit_size(BitStr), - <<I:Size>> = BitStr, - (-128 + B) bsl bit_size(BitStr) bor I. - -decpint(Bin) -> - Size = bit_size(Bin), - <<Int:Size>> = Bin, - Int. - %% X.691:10.9 Encoding of a length determinant %%encode_small_length(undefined,Len) -> % null means no UpperBound @@ -597,7 +480,7 @@ encode_length(undefined,Len) -> % un-constrained Len < 16384 -> <<2:2,Len:14>>; true -> % should be able to endode length >= 16384 - exit({error,{asn1,{encode_length,{nyi,above_16k}}}}) + error({error,{asn1,{encode_length,{nyi,above_16k}}}}) end; encode_length({0,'MAX'},Len) -> @@ -623,18 +506,6 @@ encode_small_length(Len) -> [<<1:1>>,encode_length(undefined,Len)]. -decode_small_length(Buffer) -> - case getbit(Buffer) of - {0,Remain} -> - {Bits,Remain2} = getbits(Remain,6), - {Bits+1,Remain2}; - {1,Remain} -> - decode_length(Remain,undefined) - end. - -decode_length(Buffer) -> - decode_length(Buffer,undefined). - %% un-constrained decode_length(<<0:1,Oct:7,Rest/bitstring>>,undefined) -> {Oct,Rest}; @@ -677,38 +548,6 @@ encode_boolean({Name,Val}) when is_atom(Name) -> encode_boolean(Val) -> exit({error,{asn1,{encode_boolean,Val}}}). -decode_boolean(Buffer) -> %when record(Buffer,buffer) - case getbit(Buffer) of - {1,Remain} -> {true,Remain}; - {0,Remain} -> {false,Remain} - end. - - -%% ENUMERATED with extension marker -decode_enumerated(Buffer,C,{Ntup1,Ntup2}) when is_tuple(Ntup1), is_tuple(Ntup2) -> - {Ext,Buffer2} = getext(Buffer), - case Ext of - 0 -> % not an extension value - {Val,Buffer3} = decode_integer(Buffer2,C), - case catch (element(Val+1,Ntup1)) of - NewVal when is_atom(NewVal) -> {NewVal,Buffer3}; - _Error -> exit({error,{asn1,{decode_enumerated,{Val,[Ntup1,Ntup2]}}}}) - end; - 1 -> % this an extension value - {Val,Buffer3} = decode_small_number(Buffer2), - case catch (element(Val+1,Ntup2)) of - NewVal when is_atom(NewVal) -> {NewVal,Buffer3}; - _ -> {{asn1_enum,Val},Buffer3} - end - end; - -decode_enumerated(Buffer,C,NamedNumberTup) when is_tuple(NamedNumberTup) -> - {Val,Buffer2} = decode_integer(Buffer,C), - case catch (element(Val+1,NamedNumberTup)) of - NewVal when is_atom(NewVal) -> {NewVal,Buffer2}; - _Error -> exit({error,{asn1,{decode_enumerated,{Val,NamedNumberTup}}}}) - end. - %%============================================================================ %%============================================================================ @@ -1067,36 +906,71 @@ encode_octet_string(C,Val) -> list_to_binary(Val); 2 -> list_to_binary(Val); - Sv when Sv =<65535, Sv == length(Val) -> % fixed length - list_to_binary(Val); - VR = {_,_} -> - [encode_length(VR,length(Val)),list_to_binary(Val)]; + {_,_}=VR -> + try + [encode_length(VR, length(Val)),list_to_binary(Val)] + catch + error:{error,{asn1,{encode_length,_}}} -> + encode_fragmented_octet_string(Val) + end; + Sv when is_integer(Sv), Sv =:= length(Val) -> % fixed length + if + Sv =< 65535 -> + list_to_binary(Val); + true -> + encode_fragmented_octet_string(Val) + end; Sv when is_list(Sv) -> - [encode_length({hd(Sv),lists:max(Sv)},length(Val)),list_to_binary(Val)]; + try + [encode_length({hd(Sv),lists:max(Sv)}, + length(Val)),list_to_binary(Val)] + catch + error:{error,{asn1,{encode_length,_}}} -> + encode_fragmented_octet_string(Val) + end; no -> - [encode_length(undefined,length(Val)),list_to_binary(Val)] + try + [encode_length(undefined, length(Val)),list_to_binary(Val)] + catch + error:{error,{asn1,{encode_length,_}}} -> + encode_fragmented_octet_string(Val) + end end. -decode_octet_string(Bytes,C) -> - decode_octet_string1(Bytes,get_constraint(C,'SizeConstraint')). -decode_octet_string1(<<B1,Bytes/bitstring>>,1) -> - {[B1],Bytes}; -decode_octet_string1(<<B1,B2,Bytes/bitstring>>,2) -> - {[B1,B2],Bytes}; -decode_octet_string1(Bytes,Sv) when is_integer(Sv),Sv=<65535 -> - getoctets_as_list(Bytes,Sv); -decode_octet_string1(Bytes,Sv) when is_integer(Sv) -> - decode_fragmented_octets(Bytes,Sv); -decode_octet_string1(Bytes,{Lb,Ub}) -> - {Len,Bytes2} = decode_length(Bytes,{Lb,Ub}), - getoctets_as_list(Bytes2,Len); -decode_octet_string1(Bytes,Sv) when is_list(Sv) -> - {Len,Bytes2} = decode_length(Bytes,{hd(Sv),lists:max(Sv)}), - getoctets_as_list(Bytes2,Len); -decode_octet_string1(Bytes,no) -> - {Len,Bytes2} = decode_length(Bytes,undefined), - getoctets_as_list(Bytes2,Len). - +encode_fragmented_octet_string(Val) -> + Bin = list_to_binary(Val), + efos_1(Bin). + +efos_1(<<B:16#10000/binary,T/binary>>) -> + [<<3:2,4:6>>,B|efos_1(T)]; +efos_1(<<B:16#C000/binary,T/binary>>) -> + [<<3:2,3:6>>,B|efos_1(T)]; +efos_1(<<B:16#8000/binary,T/binary>>) -> + [<<3:2,2:6>>,B|efos_1(T)]; +efos_1(<<B:16#4000/binary,T/binary>>) -> + [<<3:2,1:6>>,B|efos_1(T)]; +efos_1(<<B/bitstring>>) -> + Len = byte_size(B), + [encode_length(undefined, Len),B]. + +decode_fragmented(SegSz0, Buf0, Unit) -> + SegSz = SegSz0 * Unit * ?'16K', + <<Res:SegSz/bitstring,Buf/bitstring>> = Buf0, + decode_fragmented_1(Buf, Unit, Res). + +decode_fragmented_1(<<0:1,N:7,Buf0/bitstring>>, Unit, Res) -> + Sz = N*Unit, + <<S:Sz/bitstring,Buf/bitstring>> = Buf0, + {<<Res/bitstring,S/bitstring>>,Buf}; +decode_fragmented_1(<<1:1,0:1,N:14,Buf0/bitstring>>, Unit, Res) -> + Sz = N*Unit, + <<S:Sz/bitstring,Buf/bitstring>> = Buf0, + {<<Res/bitstring,S/bitstring>>,Buf}; +decode_fragmented_1(<<1:1,1:1,SegSz0:6,Buf0/bitstring>>, Unit, Res0) -> + SegSz = SegSz0 * Unit * ?'16K', + <<Frag:SegSz/bitstring,Buf/bitstring>> = Buf0, + Res = <<Res0/bitstring,Frag/bitstring>>, + decode_fragmented_1(Buf, Unit, Res). %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% @@ -1441,12 +1315,6 @@ decode_UTF8String(Bytes) -> getoctets_as_bin(Bytes2,Len). - % X.691:17 -encode_null(_) -> []. % encodes to nothing - -decode_null(Bytes) -> - {'NULL',Bytes}. - %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% encode_object_identifier(Val) -> CompleteList %% encode_object_identifier({Name,Val}) -> CompleteList diff --git a/lib/asn1/test/Makefile b/lib/asn1/test/Makefile index 6e6374baf1..1794d6bb71 100644 --- a/lib/asn1/test/Makefile +++ b/lib/asn1/test/Makefile @@ -83,6 +83,7 @@ MODULES= \ testInfObj \ testParameterizedInfObj \ testMergeCompile \ + testMultipleLevels \ testDeepTConstr \ testTimer \ testMegaco \ diff --git a/lib/asn1/test/asn1_SUITE.erl b/lib/asn1/test/asn1_SUITE.erl index 501157b9b4..38ec72c473 100644 --- a/lib/asn1/test/asn1_SUITE.erl +++ b/lib/asn1/test/asn1_SUITE.erl @@ -21,27 +21,17 @@ -module(asn1_SUITE). -define(only_per(Func), - if Rule == per orelse Rule == per_bin -> Func; - true -> ok + if Rule =:= per -> Func; + true -> ok end). -define(only_ber(Func), - if Rule == ber orelse Rule == ber_bin orelse Rule == ber_bin_v2 -> Func; - true -> ok + if Rule =:= ber -> Func; + true -> ok end). -define(only_uper(Func), case Rule of - uper_bin -> Func; - _ -> ok - end). --define(only_per_nif(Func), - case {Rule, lists:member(optimize, Opts)} of - {per_bin, true} -> Func; - _ -> ok - end). --define(only_ber_nif(Func), - case {Rule, lists:member(nif, Opts)} of - {ber_bin_v2, true} -> Func; - _ -> ok + uper -> Func; + _ -> ok end). -compile(export_all). @@ -55,7 +45,8 @@ suite() -> [{ct_hooks, [ts_install_cth]}]. all() -> - [{group, parallel}, + [{group, compile}, + {group, parallel}, {group, app_test}, {group, appup_test}, @@ -76,16 +67,14 @@ groups() -> {ber, parallel([]), [ber_choiceinseq, % Uses 'SOpttest' - {group, [], [ber_optional, - ber_optional_keyed_list]}]}, + ber_optional]}, {app_test, [], [{asn1_app_test, all}]}, {appup_test, [], [{asn1_appup_test, all}]}, {parallel, parallel([]), - [{group, compile}, - {group, ber}, + [{group, ber}, % Uses 'P-Record', 'Constraints', 'MEDIA-GATEWAY-CONTROL'... {group, [], [parse, test_driver_load, @@ -116,6 +105,7 @@ groups() -> testChoTypeRefPrim, testChoTypeRefSeq, testChoTypeRefSet, + testMultipleLevels, testDef, testOpt, testSeqDefault, @@ -203,13 +193,8 @@ groups() -> {performance, [], [testTimer_ber, - testTimer_ber_bin, - testTimer_ber_bin_opt, - testTimer_ber_bin_opt_driver, testTimer_per, - testTimer_per_bin, - testTimer_per_bin_opt, - testTimer_uper_bin, + testTimer_uper, smp]}]. parallel(Options) -> @@ -249,8 +234,7 @@ init_per_testcase(Func, Config) -> [{case_dir, CaseDir}, {watchdog, Dog}|Config]. end_per_testcase(_Func, Config) -> - code:del_path(?config(case_dir, Config)), - test_server:timetrap_cancel(?config(watchdog, Config)). + code:del_path(?config(case_dir, Config)). %%------------------------------------------------------------------------------ %% Test runners @@ -258,14 +242,8 @@ end_per_testcase(_Func, Config) -> test(Config, TestF) -> test(Config, TestF, [per, - per_bin, - {per_bin, [optimize]}, - uper_bin, - ber, - ber_bin, - ber_bin_v2, - % TODO: {ber_bin_v2, [optimize, nif]} ? - {ber_bin_v2, [nif]}]). + uper, + ber]). test(Config, TestF, Rules) -> Fun = fun(C, R, O) -> @@ -345,10 +323,10 @@ testCompactBitString(Config, Rule, Opts) -> testCompactBitString:compact_bit_string(Rule), ?only_uper(testCompactBitString:bit_string_unnamed(Rule)), ?only_per(testCompactBitString:bit_string_unnamed(Rule)), - ?only_per_nif(testCompactBitString:ticket_7734(Rule)), - ?only_per_nif(asn1_test_lib:compile("Constraints", Config, + ?only_per(testCompactBitString:ticket_7734(Rule)), + ?only_per(asn1_test_lib:compile("Constraints", Config, [Rule, compact_bit_string|Opts])), - ?only_per_nif(testCompactBitString:otp_4869(Rule)). + ?only_per(testCompactBitString:otp_4869(Rule)). testPrimStrings(Config) -> test(Config, fun testPrimStrings/3). testPrimStrings(Config, Rule, Opts) -> @@ -372,10 +350,10 @@ testPrimExternal(Config, Rule, Opts) -> asn1_test_lib:compile_all(["External", "PrimExternal"], Config, [Rule|Opts]), testPrimExternal:external(Rule), - ?only_ber_nif(asn1_test_lib:compile_all(["PrimStrings", "BitStr"], Config, + ?only_ber(asn1_test_lib:compile_all(["PrimStrings", "BitStr"], Config, [Rule|Opts])), - ?only_ber_nif(testPrimStrings_cases(Rule)), - ?only_ber_nif(testPrimStrings:more_strings(Rule)). + ?only_ber(testPrimStrings_cases(Rule)), + ?only_ber(testPrimStrings:more_strings(Rule)). testChoPrim(Config) -> test(Config, fun testChoPrim/3). testChoPrim(Config, Rule, Opts) -> @@ -400,7 +378,7 @@ testChoOptional(Config, Rule, Opts) -> testChoOptionalImplicitTag(Config) -> test(Config, fun testChoOptionalImplicitTag/3, - [ber, ber_bin, ber_bin_v2]). + [ber]). testChoOptionalImplicitTag(Config, Rule, Opts) -> %% Only meaningful for ber & co asn1_test_lib:compile("ChoOptionalImplicitTag", Config, [Rule|Opts]), @@ -431,6 +409,11 @@ testChoTypeRefSet(Config, Rule, Opts) -> asn1_test_lib:compile("ChoTypeRefSet", Config, [Rule|Opts]), testChoTypeRefSet:set(Rule). +testMultipleLevels(Config) -> test(Config, fun testMultipleLevels/3). +testMultipleLevels(Config, Rule, Opts) -> + asn1_test_lib:compile("MultipleLevels", Config, [Rule|Opts]), + testMultipleLevels:main(Rule). + testDef(Config) -> test(Config, fun testDef/3). testDef(Config, Rule, Opts) -> asn1_test_lib:compile("Def", Config, [Rule|Opts]), @@ -516,8 +499,7 @@ testSeqOfCho(Config, Rule, Opts) -> testSeqOfCho:main(Rule). testSeqOfIndefinite(Config) -> - test(Config, fun testSeqOfIndefinite/3, - [ber, ber_bin, ber_bin_v2, {ber_bin_v2, [nif]}]). + test(Config, fun testSeqOfIndefinite/3, [ber]). testSeqOfIndefinite(Config, Rule, Opts) -> Files = ["Mvrasn-Constants-1", "Mvrasn-DataTypes-1", "Mvrasn-21-4", "Mvrasn-20-4", "Mvrasn-19-4", "Mvrasn-18-4", "Mvrasn-17-4", @@ -633,13 +615,12 @@ c_syntax(Config) -> "SeqBadComma"]]. c_string(Config) -> - test(Config, fun c_string/3, [per, per_bin, ber, ber_bin, ber_bin_v2]). + test(Config, fun c_string/3, [per, ber]). c_string(Config, Rule, Opts) -> asn1_test_lib:compile("String", Config, [Rule|Opts]). c_implicit_before_choice(Config) -> - test(Config, fun c_implicit_before_choice/3, - [ber, ber_bin, ber_bin_v2]). + test(Config, fun c_implicit_before_choice/3, [ber]). c_implicit_before_choice(Config, Rule, Opts) -> DataDir = ?config(data_dir, Config), CaseDir = ?config(case_dir, Config), @@ -650,12 +631,13 @@ parse(Config) -> [asn1_test_lib:compile(M, Config, [abs]) || M <- test_modules()]. per(Config) -> - test(Config, fun per/3, [per, per_bin, {per_bin, [optimize]}]). + test(Config, fun per/3, [per,uper]). per(Config, Rule, Opts) -> [module_test(M, Config, Rule, Opts) || M <- per_modules()]. ber_other(Config) -> - test(Config, fun ber_other/3, [ber, ber_bin, ber_bin_v2]). + test(Config, fun ber_other/3, [ber]). + ber_other(Config, Rule, Opts) -> [module_test(M, Config, Rule, Opts) || M <- ber_modules()]. @@ -670,12 +652,12 @@ module_test(M, Config, Rule, Opts) -> ber_choiceinseq(Config) -> - test(Config, fun ber_choiceinseq/3, [ber, ber_bin, ber_bin_v2]). + test(Config, fun ber_choiceinseq/3, [ber]). ber_choiceinseq(Config, Rule, Opts) -> asn1_test_lib:compile("ChoiceInSeq", Config, [Rule|Opts]). ber_optional(Config) -> - test(Config, fun ber_optional/3, [ber, ber_bin, ber_bin_v2]). + test(Config, fun ber_optional/3, [ber]). ber_optional(Config, Rule, Opts) -> asn1_test_lib:compile("SOpttest", Config, [Rule|Opts]), V = {'S', {'A', 10, asn1_NOVALUE, asn1_NOVALUE}, @@ -686,21 +668,6 @@ ber_optional(Config, Rule, Opts) -> V2 = asn1_wrapper:decode('SOpttest', 'S', Bytes), V = element(2, V2). -ber_optional_keyed_list(Config) -> - test(Config, fun ber_optional_keyed_list/3, [ber, ber_bin]). -ber_optional_keyed_list(Config, Rule, Opts) -> - asn1_test_lib:compile("SOpttest", Config, [Rule, keyed_list|Opts]), - Vrecord = {'S', {'A', 10, asn1_NOVALUE, asn1_NOVALUE}, - {'B', asn1_NOVALUE, asn1_NOVALUE, asn1_NOVALUE}, - {'C', asn1_NOVALUE, 111, asn1_NOVALUE}}, - V = [{a, [{scriptKey, 10}]}, - {b, []}, - {c, [{callingPartysCategory, 111}]}], - {ok, B} = asn1_wrapper:encode('SOpttest', 'S', V), - Bytes = lists:flatten(B), - V2 = asn1_wrapper:decode('SOpttest', 'S', Bytes), - Vrecord = element(2, V2). - %% records used by test-case default -record('Def1', {bool0, bool1 = asn1_DEFAULT, @@ -735,7 +702,7 @@ value_bad_enum_test(Config) -> end. constructed(Config) -> - test(Config, fun constructed/3, [ber, ber_bin, ber_bin_v2]). + test(Config, fun constructed/3, [ber]). constructed(Config, Rule, Opts) -> asn1_test_lib:compile("Constructed", Config, [Rule|Opts]), {ok, B} = asn1_wrapper:encode('Constructed', 'S', {'S', false}), @@ -746,7 +713,7 @@ constructed(Config, Rule, Opts) -> [136, 1, 10] = lists:flatten(B2). ber_decode_error(Config) -> - test(Config, fun ber_decode_error/3, [ber, ber_bin, ber_bin_v2]). + test(Config, fun ber_decode_error/3, [ber]). ber_decode_error(Config, Rule, Opts) -> asn1_test_lib:compile("Constructed", Config, [Rule|Opts]), ber_decode_error:run(Opts). @@ -759,14 +726,14 @@ h323test(Config, Rule, Opts) -> h323test:run(Rule). per_GeneralString(Config) -> - test(Config, fun per_GeneralString/3, [per, per_bin]). + test(Config, fun per_GeneralString/3, [per]). per_GeneralString(Config, Rule, Opts) -> asn1_test_lib:compile("MULTIMEDIA-SYSTEM-CONTROL", Config, [Rule|Opts]), UI = [109, 64, 1, 57], {ok, _V} = asn1_wrapper:decode('MULTIMEDIA-SYSTEM-CONTROL', 'MultimediaSystemControlMessage', UI). -per_open_type(Config) -> test(Config, fun per_open_type/3, [per, per_bin]). +per_open_type(Config) -> test(Config, fun per_open_type/3, [per]). per_open_type(Config, Rule, Opts) -> asn1_test_lib:compile("OpenType", Config, [Rule|Opts]), {ok, _} = asn1ct:test('OpenType', 'Ot', {'Stype', 10, true}). @@ -779,24 +746,24 @@ testConstraints(Config, Rule, Opts) -> testSeqIndefinite(Config) -> - test(Config, fun testSeqIndefinite/3, [ber, ber_bin, ber_bin_v2, - {ber_bin_v2, [nif]}]). + test(Config, fun testSeqIndefinite/3, [ber]). + testSeqIndefinite(Config, Rule, Opts) -> asn1_test_lib:compile("SeqSetIndefinite", Config, [Rule|Opts]), testSeqIndefinite:main(Rule). testSetIndefinite(Config) -> - test(Config, fun testSetIndefinite/3, [ber, ber_bin, ber_bin_v2, - {ber_bin_v2, [nif]}]). + test(Config, fun testSetIndefinite/3, [ber]). + testSetIndefinite(Config, Rule, Opts) -> asn1_test_lib:compile("SeqSetIndefinite", Config, [Rule|Opts]), testSetIndefinite:main(Rule). testChoiceIndefinite(Config) -> - test(Config, fun testChoiceIndefinite/3, [ber, ber_bin, ber_bin_v2, - {ber_bin_v2, [nif]}]). + test(Config, fun testChoiceIndefinite/3, [ber]). + testChoiceIndefinite(Config, Rule, Opts) -> asn1_test_lib:compile("ChoiceIndef", Config, [Rule|Opts]), testChoiceIndefinite:main(Rule). @@ -858,7 +825,7 @@ testExport(Config) -> end. testImport(Config) -> - test(Config, fun testImport/3, [ber, ber_bin, ber_bin_v2]). + test(Config, fun testImport/3, [ber]). testImport(Config, Rule, Opts) -> {error, _} = asn1ct:compile(filename:join(?config(data_dir, Config), "ImportsFrom"), @@ -907,8 +874,7 @@ duplicate_tags(Config) -> {skip, "Runs in asn1_SUITE only"} end. -rtUI(Config) -> test(Config, fun rtUI/3, [per, per_bin, ber, - ber_bin, ber_bin_v2]). +rtUI(Config) -> test(Config, fun rtUI/3, [per,ber]). rtUI(Config, Rule, Opts) -> asn1_test_lib:compile("Prim", Config, [Rule|Opts]), {ok, _} = asn1rt:info('Prim'). @@ -924,19 +890,19 @@ testINSTANCE_OF(Config, Rule, Opts) -> testINSTANCE_OF:main(Rule). testTCAP(Config) -> - test(Config, fun testTCAP/3, - [ber, ber_bin, ber_bin_v2, {ber_bin_v2, [nif]}]). + test(Config, fun testTCAP/3, [ber]). testTCAP(Config, Rule, Opts) -> testTCAP:compile(Config, [Rule|Opts]), testTCAP:test(Rule, Config), case Rule of - ber_bin_v2 -> testTCAP:compile_asn1config(Config, [Rule, asn1config]), - testTCAP:test_asn1config(); - _ -> ok + ber -> + testTCAP:compile_asn1config(Config, [Rule, asn1config]), + testTCAP:test_asn1config(); + _ -> ok end. testDER(Config) -> - test(Config, fun testDER/3, [ber, ber_bin, ber_bin_v2]). + test(Config, fun testDER/3, [ber]). testDER(Config, Rule, Opts) -> asn1_test_lib:compile("DERSpec", Config, [Rule, der|Opts]), testDER:test(), @@ -946,7 +912,7 @@ testDER(Config, Rule, Opts) -> testSeqSetDefaultVal:main(Rule). specialized_decodes(Config) -> - test(Config, fun specialized_decodes/3, [ber_bin_v2]). + test(Config, fun specialized_decodes/3, [ber]). specialized_decodes(Config, Rule, Opts) -> asn1_test_lib:compile_all(["PartialDecSeq.asn", "PartialDecSeq2.asn", @@ -954,13 +920,12 @@ specialized_decodes(Config, Rule, Opts) -> "PartialDecMyHTTP.asn", "MEDIA-GATEWAY-CONTROL.asn", "P-Record"], - Config, [Rule, optimize, asn1config|Opts]), + Config, [Rule, asn1config|Opts]), test_partial_incomplete_decode:test(Config), test_selective_decode:test(). special_decode_performance(Config) -> - test(Config, fun special_decode_performance/3, - [{ber_bin, [optimize]}, {ber_bin_v2, [optimize, nif]}]). + test(Config, fun special_decode_performance/3, [ber]). special_decode_performance(Config, Rule, Opts) -> Files = ["MEDIA-GATEWAY-CONTROL", "PartialDecSeq"], asn1_test_lib:compile_all(Files, Config, [Rule, asn1config|Opts]), @@ -968,19 +933,19 @@ special_decode_performance(Config, Rule, Opts) -> test_driver_load(Config) -> - test(Config, fun test_driver_load/3, [{per_bin, [optimize]}]). + test(Config, fun test_driver_load/3, [per]). test_driver_load(Config, Rule, Opts) -> asn1_test_lib:compile("P-Record", Config, [Rule|Opts]), test_driver_load:test(5). test_ParamTypeInfObj(Config) -> - asn1_test_lib:compile("IN-CS-1-Datatypes", Config, [ber_bin]). + asn1_test_lib:compile("IN-CS-1-Datatypes", Config, [ber]). test_WS_ParamClass(Config) -> - asn1_test_lib:compile("InformationFramework", Config, [ber_bin]). + asn1_test_lib:compile("InformationFramework", Config, [ber]). test_Defed_ObjectIdentifier(Config) -> - asn1_test_lib:compile("UsefulDefinitions", Config, [ber_bin]). + asn1_test_lib:compile("UsefulDefinitions", Config, [ber]). testSelectionType(Config) -> test(Config, fun testSelectionType/3). testSelectionType(Config, Rule, Opts) -> @@ -988,7 +953,7 @@ testSelectionType(Config, Rule, Opts) -> {ok, _} = testSelectionTypes:test(). testSSLspecs(Config) -> - test(Config, fun testSSLspecs/3, [ber, ber_bin, ber_bin_v2, {ber_bin_v2, [optimize]}]). + test(Config, fun testSSLspecs/3, [ber]). testSSLspecs(Config, Rule, Opts) -> ok = testSSLspecs:compile(Config, [Rule, compact_bit_string, der|Opts]), @@ -1012,12 +977,12 @@ test_undecoded_rest(Config, Rule, Opts) -> ok = test_undecoded_rest:test([], Config), asn1_test_lib:compile("P-Record", Config, [Rule,undec_rest|Opts]), case Rule of - ber_bin_v2 -> ok; + ber -> ok; _ -> test_undecoded_rest:test(undec_rest, Config) end. test_inline(Config) -> - test(Config, fun test_inline/3, [ber, ber_bin, ber_bin_v2]). + test(Config, fun test_inline/3, [ber]). test_inline(Config, Rule, Opts) -> case code:which(asn1ct) of cover_compiled -> @@ -1030,12 +995,11 @@ test_inline(Config, Rule, Opts) -> end. testTcapsystem(Config) -> - test(Config, fun testTcapsystem/3, [ber, ber_bin, ber_bin_v2]). + test(Config, fun testTcapsystem/3, [ber]). testTcapsystem(Config, Rule, Opts) -> testTcapsystem:compile(Config, [Rule|Opts]). -testNBAPsystem(Config) -> test(Config, fun testNBAPsystem/3, - [per, per_bin, {per_bin, [optimize]}]). +testNBAPsystem(Config) -> test(Config, fun testNBAPsystem/3, [per]). testNBAPsystem(Config, Rule, Opts) -> testNBAPsystem:compile(Config, [Rule|Opts]), testNBAPsystem:test(Rule, Config). @@ -1065,21 +1029,23 @@ test_modified_x420(Config) -> asn1_test_lib:compile_all(Files, Config, [der]), test_modified_x420:test_io(Config). + +testX420() -> + [{timetrap,{minutes,90}}]. testX420(Config) -> - test(Config, fun testX420/3, [ber, ber_bin, ber_bin_v2]). + test(Config, fun testX420/3, [ber]). testX420(Config, Rule, Opts) -> testX420:compile(Rule, [der|Opts], Config), ok = testX420:ticket7759(Rule, Config), testX420:compile(Rule, Opts, Config). test_x691(Config) -> - test(Config, fun test_x691/3, - [per, per_bin, uper_bin, {per_bin, [optimize]}]). + test(Config, fun test_x691/3, [per, uper]). test_x691(Config, Rule, Opts) -> Files = ["P-RecordA1", "P-RecordA2", "P-RecordA3"], asn1_test_lib:compile_all(Files, Config, [Rule|Opts]), test_x691:cases(Rule, case Rule of - uper_bin -> unaligned; + uper -> unaligned; _ -> aligned end), asn1_test_lib:ticket_7708(Config, []), @@ -1090,8 +1056,7 @@ ticket_6143(Config) -> testExtensionAdditionGroup(Config) -> %% FIXME problems with automatic tags [ber_bin], [ber_bin, optimize] - test(Config, fun testExtensionAdditionGroup/3, - [per_bin, {per_bin, [optimize]}, uper_bin]). + test(Config, fun testExtensionAdditionGroup/3, [per, uper]). testExtensionAdditionGroup(Config, Rule, Opts) -> asn1_test_lib:compile("Extension-Addition-Group", Config, [Rule|Opts]), asn1_test_lib:compile_erlang("extensionAdditionGroup", Config, @@ -1180,46 +1145,17 @@ timer_compile(Config, Rule, Opts) -> asn1_test_lib:compile_all(["H235-SECURITY-MESSAGES", "H323-MESSAGES"], Config, [Rule|Opts]). -testTimer_ber(suite) -> []; testTimer_ber(Config) -> timer_compile(Config,ber,[]), testTimer:go(Config,ber). -testTimer_ber_bin(suite) -> []; -testTimer_ber_bin(Config) -> - timer_compile(Config,ber_bin,[]), - testTimer:go(Config,ber_bin). - -testTimer_ber_bin_opt(suite) -> []; -testTimer_ber_bin_opt(Config) -> - timer_compile(Config,ber_bin,[optimize]), - testTimer:go(Config,ber_bin). - -testTimer_ber_bin_opt_driver(suite) -> []; -testTimer_ber_bin_opt_driver(Config) -> - timer_compile(Config,ber_bin,[optimize,driver]), - testTimer:go(Config,ber_bin). - -testTimer_per(suite) -> []; testTimer_per(Config) -> timer_compile(Config,per,[]), testTimer:go(Config,per). -testTimer_per_bin(suite) -> []; -testTimer_per_bin(Config) -> - timer_compile(Config,per_bin,[]), - testTimer:go(Config,per_bin). - -testTimer_per_bin_opt(suite) -> []; -testTimer_per_bin_opt(Config) -> - timer_compile(Config,per_bin,[optimize]), - testTimer:go(Config,per_bin). - - -testTimer_uper_bin(suite) -> []; -testTimer_uper_bin(Config) -> - timer_compile(Config,uper_bin,[]), - {comment,_} = testTimer:go(Config,uper_bin). +testTimer_uper(Config) -> + timer_compile(Config,uper,[]), + {comment,_} = testTimer:go(Config,uper). %% Test of multiple-line comment, OTP-8043 testComment(suite) -> []; @@ -1262,11 +1198,11 @@ testName2Number(Config) -> ok. ticket_7407(Config) -> - asn1_test_lib:compile("EUTRA-extract-7407", Config, [uper_bin]), + asn1_test_lib:compile("EUTRA-extract-7407", Config, [uper]), asn1_test_lib:ticket_7407_code(true), asn1_test_lib:compile("EUTRA-extract-7407", Config, - [uper_bin, no_final_padding]), + [uper, no_final_padding]), asn1_test_lib:ticket_7407_code(false). smp(suite) -> []; @@ -1277,7 +1213,7 @@ smp(Config) -> io:format("smp starting ~p workers\n",[NumOfProcs]), Msg = {initiatingMessage, testNBAPsystem:cell_setup_req_msg()}, - ok = testNBAPsystem:compile(Config, [per_bin, optimize]), + ok = testNBAPsystem:compile(Config, [per]), enc_dec(NumOfProcs,Msg,2), @@ -1286,7 +1222,7 @@ smp(Config) -> {Time1,ok} = timer:tc(?MODULE,enc_dec,[NumOfProcs,Msg, N]), {Time1S,ok} = timer:tc(?MODULE,enc_dec,[1, Msg, NumOfProcs * N]), - ok = testNBAPsystem:compile(Config, [ber_bin, optimize, nif]), + ok = testNBAPsystem:compile(Config, [ber]), {Time3,ok} = timer:tc(?MODULE,enc_dec,[NumOfProcs,Msg, N]), {Time3S,ok} = timer:tc(?MODULE,enc_dec,[1, Msg, NumOfProcs * N]), @@ -1307,10 +1243,8 @@ per_performance(Config) -> file:make_dir(NifDir),file:make_dir(ErlDir), Msg = {initiatingMessage, testNBAPsystem:cell_setup_req_msg()}, - ok = testNBAPsystem:compile([{priv_dir,NifDir}|Config], - [per_bin, optimize]), - ok = testNBAPsystem:compile([{priv_dir,ErlDir}|Config], - [per_bin]), + ok = testNBAPsystem:compile([{priv_dir,NifDir}|Config], [per]), + ok = testNBAPsystem:compile([{priv_dir,ErlDir}|Config], [per]), Modules = ['NBAP-CommonDataTypes', 'NBAP-Constants', @@ -1348,7 +1282,7 @@ per_performance(Config) -> ber_performance(Config) -> Msg = {initiatingMessage, testNBAPsystem:cell_setup_req_msg()}, - ok = testNBAPsystem:compile(Config, [ber_bin, optimize, nif]), + ok = testNBAPsystem:compile(Config, [ber]), BerFun = fun() -> @@ -1522,7 +1456,7 @@ pforeach(_Fun,[],[]) -> -record('Iu-ReleaseCommand',{first,second}). ticket7904(Config) -> - asn1_test_lib:compile("RANAPextract1", Config, [per_bin, optimize]), + asn1_test_lib:compile("RANAPextract1", Config, [per]), Val1 = #'InitiatingMessage'{procedureCode=1, criticality=ignore, diff --git a/lib/asn1/test/asn1_SUITE_data/MultipleLevels.asn b/lib/asn1/test/asn1_SUITE_data/MultipleLevels.asn new file mode 100644 index 0000000000..1824e1fa5a --- /dev/null +++ b/lib/asn1/test/asn1_SUITE_data/MultipleLevels.asn @@ -0,0 +1,19 @@ +MultipleLevels DEFINITIONS AUTOMATIC TAGS ::= + +BEGIN + +Top ::= SEQUENCE { + country CountryName, + region Name +} + +CountryName ::= CountryName0 + +CountryName0 ::= Name + +Name ::= CHOICE { + short PrintableString (SIZE (0..10)), + long PrintableString +} + +END diff --git a/lib/asn1/test/asn1_SUITE_data/PartialDecSeq.asn1config b/lib/asn1/test/asn1_SUITE_data/PartialDecSeq.asn1config index 19fa3c990e..d388f6cd02 100644 --- a/lib/asn1/test/asn1_SUITE_data/PartialDecSeq.asn1config +++ b/lib/asn1/test/asn1_SUITE_data/PartialDecSeq.asn1config @@ -17,6 +17,6 @@ {decode_D_incomplete,['D',[{a,undecoded}]]}, {decode_F_fb_exclusive2,['F',[{fb,[{b,parts},{d,[{da,parts}]}]}]]}, {decode_F_fb_exclusive3,['F',[{fb,[{b,parts},{d,[{da,parts},{dc,[{dcc,undecoded}]}]}]}]]}]}}. {module_name,'Seq.asn1'}. -{compile_options,[ber_bin,optimize,debug_info]}. +{compile_options,[ber,debug_info]}. {multifile_compile,['M1.asn','M2.asn']}. diff --git a/lib/asn1/test/asn1_SUITE_data/PrimStrings.asn1 b/lib/asn1/test/asn1_SUITE_data/PrimStrings.asn1 index d287840f30..7cb47e9792 100644 --- a/lib/asn1/test/asn1_SUITE_data/PrimStrings.asn1 +++ b/lib/asn1/test/asn1_SUITE_data/PrimStrings.asn1 @@ -55,6 +55,19 @@ BS1024 ::= BIT STRING (SIZE (1024)) OsExpCon ::= [60] EXPLICIT OCTET STRING OsExpPri ::= [PRIVATE 61] EXPLICIT OCTET STRING OsExpApp ::= [APPLICATION 62] EXPLICIT OCTET STRING + OsFrag ::= OCTET STRING (SIZE (0..100000)) + FixedOs65536 ::= OCTET STRING (SIZE (65536)) + FixedOs65537 ::= OCTET STRING (SIZE (65537)) + + OsAlignment ::= SEQUENCE { + b1 BOOLEAN, + s1 Os, + b2 BOOLEAN, + s2 OsFrag, + b3 BOOLEAN, + s3 FixedOs65536, + i INTEGER (0..63) + } Ns ::= NumericString NsCon ::= [70] NumericString diff --git a/lib/asn1/test/asn1_SUITE_data/testobj.erl b/lib/asn1/test/asn1_SUITE_data/testobj.erl index be7ceee7d1..80942f7e38 100644 --- a/lib/asn1/test/asn1_SUITE_data/testobj.erl +++ b/lib/asn1/test/asn1_SUITE_data/testobj.erl @@ -1420,24 +1420,7 @@ wrapper_encode(Module,Type,Value) -> Error end. -wrapper_decode(Module,Type,Bytes) -> - case Module:encoding_rule() of - ber -> - asn1rt:decode(Module,Type,Bytes); - ber_bin when binary(Bytes) -> - asn1rt:decode(Module,Type,Bytes); - ber_bin -> - asn1rt:decode(Module,Type,list_to_binary(Bytes)); - ber_bin_v2 when binary(Bytes) -> - asn1rt:decode(Module,Type,Bytes); - ber_bin_v2 -> - asn1rt:decode(Module,Type,list_to_binary(Bytes)); - per -> - asn1rt:decode(Module,Type,Bytes); - per_bin when binary(Bytes) -> - asn1rt:decode(Module,Type,Bytes); - per_bin -> - asn1rt:decode(Module,Type,list_to_binary(Bytes)); - uper_bin -> - asn1rt:decode(Module,Type,list_to_binary(Bytes)) - end. +wrapper_decode(Module, Type, Bytes) when is_binary(Bytes) -> + asn1rt:decode(Module, Type, Bytes); +wrapper_decode(Module, Type, Bytes) when is_list(Bytes) -> + asn1rt:decode(Module, Type, list_to_binary(Bytes)). diff --git a/lib/asn1/test/asn1_app_test.erl b/lib/asn1/test/asn1_app_test.erl index 2c31c3259d..9dbe1b50e0 100644 --- a/lib/asn1/test/asn1_app_test.erl +++ b/lib/asn1/test/asn1_app_test.erl @@ -138,7 +138,8 @@ check_asn1ct_modules(Extra) -> asn1ct_name,asn1ct_constructed_per,asn1ct_constructed_ber, asn1ct_gen_ber,asn1ct_constructed_ber_bin_v2, asn1ct_gen_ber_bin_v2,asn1ct_value, - asn1ct_tok,asn1ct_parser2,asn1ct_table], + asn1ct_tok,asn1ct_parser2,asn1ct_table, + asn1ct_imm], case Extra -- ASN1CTMods of [] -> ok; diff --git a/lib/asn1/test/asn1_test_lib.erl b/lib/asn1/test/asn1_test_lib.erl index 96c04a9436..fda635d0eb 100644 --- a/lib/asn1/test/asn1_test_lib.erl +++ b/lib/asn1/test/asn1_test_lib.erl @@ -87,14 +87,14 @@ ticket_7407_compile(Config,Option) -> ?line OutDir = ?config(priv_dir,Config), ?line ok = asn1ct:compile(DataDir ++ "EUTRA-extract-7407", - [uper_bin, {outdir,OutDir}]++Option). + [uper, {outdir,OutDir}]++Option). ticket_7708(Config,Option) -> ?line DataDir = ?config(data_dir,Config), ?line OutDir = ?config(priv_dir,Config), ?line ok = asn1ct:compile(DataDir ++ "EUTRA-extract-55", - [uper_bin, {outdir,OutDir}]++Option). + [uper, {outdir,OutDir}]++Option). ticket_7407_code(FinalPadding) -> @@ -154,7 +154,7 @@ ticket_7678(Config, Option) -> ?line OutDir = ?config(priv_dir,Config), ?line ok = asn1ct:compile(DataDir ++ "UPERDefault", - [uper_bin, {outdir,OutDir}]++Option), + [uper, {outdir,OutDir}]++Option), ?line Val = 'UPERDefault':seq(), ?line {ok,<<0,6,0>>} = 'UPERDefault':encode('Seq',Val), @@ -167,12 +167,12 @@ ticket_7763(Config) -> ?line OutDir = ?config(priv_dir,Config), ?line ok = asn1ct:compile(DataDir ++ "EUTRA-extract-55", - [uper_bin, {outdir,OutDir}]), + [uper, {outdir,OutDir}]), Val = {'Seq',15,lists:duplicate(8,0),[0],lists:duplicate(28,0),15,true}, ?line {ok,Bin} = 'EUTRA-extract-55':encode('Seq',Val), ?line ok = asn1ct:compile(DataDir ++ "EUTRA-extract-55", - [uper_bin,compact_bit_string,{outdir,OutDir}]), + [uper,compact_bit_string,{outdir,OutDir}]), CompactVal = {'Seq',15,{0,<<0>>},{7,<<0>>},{4,<<0,0,0,0>>},15,true}, {ok,CompactBin} = 'EUTRA-extract-55':encode('Seq',CompactVal), diff --git a/lib/asn1/test/asn1_wrapper.erl b/lib/asn1/test/asn1_wrapper.erl index d515b99ac2..e764d8b4ca 100644 --- a/lib/asn1/test/asn1_wrapper.erl +++ b/lib/asn1/test/asn1_wrapper.erl @@ -34,41 +34,16 @@ encode(Module,Type,Value) -> Error end. -decode(Module,Type,Bytes) -> - case Module:encoding_rule() of - ber -> - asn1rt:decode(Module,Type,Bytes); - ber_bin when is_binary(Bytes) -> - asn1rt:decode(Module,Type,Bytes); - ber_bin -> - asn1rt:decode(Module,Type,list_to_binary(Bytes)); - ber_bin_v2 when is_binary(Bytes) -> - asn1rt:decode(Module,Type,Bytes); - ber_bin_v2 -> - asn1rt:decode(Module,Type,list_to_binary(Bytes)); - per -> - asn1rt:decode(Module,Type,Bytes); - per_bin when is_binary(Bytes) -> - asn1rt:decode(Module,Type,Bytes); - per_bin -> - asn1rt:decode(Module,Type,list_to_binary(Bytes)); - uper_bin when is_binary(Bytes) -> - asn1rt:decode(Module,Type,Bytes); - uper_bin -> - asn1rt:decode(Module,Type,list_to_binary(Bytes)) - end. +decode(Module, Type, Bytes) when is_binary(Bytes) -> + asn1rt:decode(Module, Type, Bytes); +decode(Module, Type, Bytes) when is_list(Bytes) -> + asn1rt:decode(Module, Type, list_to_binary(Bytes)). erule(ber) -> ber; -erule(ber_bin) -> - ber; -erule(ber_bin_v2) -> - ber; erule(per) -> per; -erule(per_bin) -> - per; -erule(uper_bin) -> +erule(uper) -> per. diff --git a/lib/asn1/test/h323test.erl b/lib/asn1/test/h323test.erl index b7a7d6e4df..426ae16994 100644 --- a/lib/asn1/test/h323test.erl +++ b/lib/asn1/test/h323test.erl @@ -22,7 +22,6 @@ -export([run/1]). -include_lib("test_server/include/test_server.hrl"). -run(per_bin) -> run(); run(per) -> run(); run(_Rules) -> ok. diff --git a/lib/asn1/test/testChoiceIndefinite.erl b/lib/asn1/test/testChoiceIndefinite.erl index 630efcf27a..b5832c985a 100644 --- a/lib/asn1/test/testChoiceIndefinite.erl +++ b/lib/asn1/test/testChoiceIndefinite.erl @@ -23,12 +23,7 @@ -include_lib("test_server/include/test_server.hrl"). -main(per_bin) -> ok; main(per) -> ok; -main(ber_bin_v2) -> - main(ber); -main(ber_bin) -> - main(ber); main(ber) -> %% Test case related to OTP-4358 %% normal encoding diff --git a/lib/asn1/test/testCompactBitString.erl b/lib/asn1/test/testCompactBitString.erl index 9563a31bf3..db102a3bda 100644 --- a/lib/asn1/test/testCompactBitString.erl +++ b/lib/asn1/test/testCompactBitString.erl @@ -233,7 +233,7 @@ compact_bit_string(Rules) -> ok. -ticket_7734(per_bin) -> +ticket_7734(per) -> ?line BS = {0,list_to_binary(lists:duplicate(128,0))}, ?line {ok,BSEnc} = asn1_wrapper:encode('PrimStrings','BS1024',BS), ?line {ok,BS} = asn1_wrapper:decode('PrimStrings','BS1024',BSEnc). @@ -251,7 +251,7 @@ bit_string_unnamed(Rules) -> lists:flatten(Bytes1)) end. -otp_4869(per_bin) -> +otp_4869(per) -> ?line Val1={'IP',[0],{0,<<62,235,90,50,0,0,0,0,0,0,0,0,0,0,0,0>>},asn1_NOVALUE}, ?line Val2 = {'IP',[0],[0,0,1,1,1,1,1,0,1,1,1,0,1,0,1,1,0,1,0,1,1,0,1,0,0,0,1,1,0,0,1,0] ++ lists:duplicate(128 - 32,0),asn1_NOVALUE}, diff --git a/lib/asn1/test/testEnumExt.erl b/lib/asn1/test/testEnumExt.erl index c97116413a..bb975a1d13 100644 --- a/lib/asn1/test/testEnumExt.erl +++ b/lib/asn1/test/testEnumExt.erl @@ -23,8 +23,8 @@ -include_lib("test_server/include/test_server.hrl"). -main(Rules) when Rules == per; Rules == per_bin; Rules == uper_bin -> - io:format("main(~p)~n",[Rules]), +main(Rule) when Rule =:= per; Rule =:= uper -> + io:format("main(~p)~n",[Rule]), B32=[32],B64=[64], %% ENUMERATED with extensionmark (value is in root set) ?line {ok,B32} = asn1_wrapper:encode('EnumExt','Ext',red), @@ -42,10 +42,6 @@ main(Rules) when Rules == per; Rules == per_bin; Rules == uper_bin -> ?line {ok,red} = asn1_wrapper:decode('EnumExt','Noext',B64), ok; -main(ber_bin_v2) -> - main(ber); -main(ber_bin) -> - main(ber); main(ber) -> io:format("main(ber)~n",[]), %% ENUMERATED with extensionmark (value is in root set) diff --git a/lib/asn1/test/testINSTANCE_OF.erl b/lib/asn1/test/testINSTANCE_OF.erl index 5986a00ec5..ce411beb92 100644 --- a/lib/asn1/test/testINSTANCE_OF.erl +++ b/lib/asn1/test/testINSTANCE_OF.erl @@ -26,7 +26,7 @@ main(Erule) -> ?line {ok,Integer} = asn1_wrapper:encode('INSTANCEOF','Int',3), - Int = wrap(Erule,Integer), + Int = list_to_binary(Integer), ValotherName = {otherName,{'INSTANCE OF',{2,4},Int}}, VallastName1 = {lastName,{'GeneralName_lastName',{2,4},12}}, VallastName2 = {lastName,{'GeneralName_lastName',{2,3,4}, @@ -61,18 +61,3 @@ test_encdec(_Erule,{lastName,{'GeneralName_lastName',{2,3,4}, ok; test_encdec(Erule,Res) -> {error,{Erule,Res}}. - -wrap(ber,Int) when is_list(Int) -> - binary_to_list(list_to_binary(Int)); -wrap(per,Int) when is_list(Int) -> - binary_to_list(list_to_binary(Int)); -wrap(ber_bin,Int) when is_list(Int) -> - list_to_binary(Int); -wrap(ber_bin_v2,Int) when is_list(Int) -> - list_to_binary(Int); -wrap(per_bin,Int) when is_list(Int) -> - list_to_binary(Int); -wrap(uper_bin,Int) when is_list(Int) -> - list_to_binary(Int); -wrap(_,Int) -> - Int. diff --git a/lib/asn1/test/testInfObjectClass.erl b/lib/asn1/test/testInfObjectClass.erl index e639066246..98408502c6 100644 --- a/lib/asn1/test/testInfObjectClass.erl +++ b/lib/asn1/test/testInfObjectClass.erl @@ -37,15 +37,12 @@ main(Rule) -> {component,'ArgumentType'}, {value,_},_}}} = asn1_wrapper:encode('InfClass','Seq', {'Seq',12,13,1}), - Bytes2 = - if - Rule==per;Rule==per_bin -> - [1,12,1,11,1,1]; - Rule == uper_bin -> - <<1,12,1,11,1,1>>; - true -> - [48,9,2,1,12,2,1,11,2,1,1] - end, + Bytes2 = case Rule of + ber -> + <<48,9,2,1,12,2,1,11,2,1,1>>; + _ -> + <<1,12,1,11,1,1>> + end, ?line {error,{asn1,{'Type not compatible with table constraint', {{component,_}, {value,_B},_}}}} = diff --git a/lib/asn1/test/testMergeCompile.erl b/lib/asn1/test/testMergeCompile.erl index 31aa3518f6..d63df28c31 100644 --- a/lib/asn1/test/testMergeCompile.erl +++ b/lib/asn1/test/testMergeCompile.erl @@ -43,17 +43,11 @@ main(Erule) -> ?line EncVal = case Erule of per -> - [1,100]; - per_bin -> <<1,100>>; - uper_bin -> + uper -> <<1,100>>; ber -> - [2,1,1]; - ber_bin -> - <<2,1,1>>; - ber_bin_v2 -> - <<2,1,1>> + [2,1,1] end, ?line PEVal2 = [{dummy,1,ignore,EncVal},{dummy,2,reject,EncVal}], ?line Val2 = @@ -76,7 +70,7 @@ main(Erule) -> mvrasn(Erule) -> case Erule of - Ber when Ber == ber;Ber == ber_bin -> + ber -> ?line ok = test(isd), ?line ok = test(isd2), ?line ok = test(dsd), diff --git a/lib/asn1/test/testMultipleLevels.erl b/lib/asn1/test/testMultipleLevels.erl new file mode 100644 index 0000000000..ff6d023440 --- /dev/null +++ b/lib/asn1/test/testMultipleLevels.erl @@ -0,0 +1,27 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2012. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% +%% +%% + +-module(testMultipleLevels). +-export([main/1]). + +main(_) -> + Data = {'Top',{short,"abc"},{long,"a long string follows here"}}, + {ok,B} = 'MultipleLevels':encode('Top', Data), + {ok,Data} = 'MultipleLevels':decode('Top', iolist_to_binary(B)). diff --git a/lib/asn1/test/testParameterizedInfObj.erl b/lib/asn1/test/testParameterizedInfObj.erl index 68faf08a61..6f53595132 100644 --- a/lib/asn1/test/testParameterizedInfObj.erl +++ b/lib/asn1/test/testParameterizedInfObj.erl @@ -98,7 +98,7 @@ ranap(_Erule) -> ok. -open_type(uper_bin,Val) when is_list(Val) -> +open_type(uper,Val) when is_list(Val) -> list_to_binary(Val); open_type(_,Val) -> Val. diff --git a/lib/asn1/test/testPrimStrings.erl b/lib/asn1/test/testPrimStrings.erl index b1c5172b95..9a640a2cb1 100644 --- a/lib/asn1/test/testPrimStrings.erl +++ b/lib/asn1/test/testPrimStrings.erl @@ -338,69 +338,24 @@ octet_string(Rules) -> ok end, + roundtrip('Os', [47,23,99,255,1]), + roundtrip('OsCon', [47,23,99,255,1]), + roundtrip('OsPri', [47,23,99,255,1]), + roundtrip('OsApp', [47,23,99,255,1]), - - ?line {ok,Bytes4} = - asn1_wrapper:encode('PrimStrings','Os',[47,23,99,255,1]), - ?line {ok,[47,23,99,255,1]} = asn1_wrapper:decode('PrimStrings','Os',lists:flatten(Bytes4)), - - ?line {ok,Bytes5} = - asn1_wrapper:encode('PrimStrings','OsCon',[47,23,99,255,1]), - ?line {ok,[47,23,99,255,1]} = asn1_wrapper:decode('PrimStrings','OsCon',lists:flatten(Bytes5)), - - ?line {ok,Bytes6} = - asn1_wrapper:encode('PrimStrings','OsPri',[47,23,99,255,1]), - ?line {ok,[47,23,99,255,1]} = asn1_wrapper:decode('PrimStrings','OsPri',lists:flatten(Bytes6)), - - ?line {ok,Bytes7} = - asn1_wrapper:encode('PrimStrings','OsApp',[47,23,99,255,1]), - ?line {ok,[47,23,99,255,1]} = asn1_wrapper:decode('PrimStrings','OsApp',lists:flatten(Bytes7)), - - ?line {ok,Bytes8} = - asn1_wrapper:encode('PrimStrings','OsExpCon',[47,23,99,255,1]), - ?line {ok,[47,23,99,255,1]} = asn1_wrapper:decode('PrimStrings','OsExpCon',lists:flatten(Bytes8)), - - ?line {ok,Bytes9} = - asn1_wrapper:encode('PrimStrings','OsExpPri',[47,23,99,255,1]), - ?line {ok,[47,23,99,255,1]} = asn1_wrapper:decode('PrimStrings','OsExpPri',lists:flatten(Bytes9)), - - ?line {ok,Bytes10} = - asn1_wrapper:encode('PrimStrings','OsExpApp',[47,23,99,255,1]), - ?line {ok,[47,23,99,255,1]} = asn1_wrapper:decode('PrimStrings','OsExpApp',lists:flatten(Bytes10)), - - ?line {ok,Bytes11} = - asn1_wrapper:encode('PrimStrings','Os',[]), - ?line {ok,[]} = asn1_wrapper:decode('PrimStrings','Os',lists:flatten(Bytes11)), - - ?line {ok,Bytes12} = - asn1_wrapper:encode('PrimStrings','OsApp',[]), - ?line {ok,[]} = asn1_wrapper:decode('PrimStrings','OsApp',lists:flatten(Bytes12)), - - ?line {ok,Bytes13} = - asn1_wrapper:encode('PrimStrings','OsExpApp',[]), - ?line {ok,[]} = asn1_wrapper:decode('PrimStrings','OsExpApp',lists:flatten(Bytes13)), - - - - - + roundtrip('OsExpCon', [47,23,99,255,1]), + roundtrip('OsExpPri', [47,23,99,255,1]), + roundtrip('OsExpApp', [47,23,99,255,1]), + roundtrip('Os', []), + roundtrip('OsApp', []), + roundtrip('OsExpApp',[]), OsR = "12345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890", - ?line {ok,Bytes21} = - asn1_wrapper:encode('PrimStrings','Os',OsR), - ?line {ok,Os1} = asn1_wrapper:decode('PrimStrings','Os',lists:flatten(Bytes21)), - ?line Os1 = OsR, - ?line {ok,Bytes22} = - asn1_wrapper:encode('PrimStrings','OsCon',OsR), - ?line {ok,Os2} = asn1_wrapper:decode('PrimStrings','OsCon',lists:flatten(Bytes22)), - ?line Os2 = OsR, - ?line {ok,Bytes23} = - asn1_wrapper:encode('PrimStrings','OsExpApp',OsR), - ?line {ok,Os3} = asn1_wrapper:decode('PrimStrings','OsExpApp',lists:flatten(Bytes23)), - ?line Os3 = OsR, - + roundtrip('Os', OsR), + roundtrip('OsCon', OsR), + roundtrip('OsExpApp', OsR), ?line case asn1_wrapper:erule(Rules) of @@ -416,21 +371,85 @@ octet_string(Rules) -> ok end, - + fragmented_octet_string(Rules), ok. +fragmented_octet_string(Erules) -> + K16 = 1 bsl 14, + K32 = K16 + K16, + K48 = K32 + K16, + K64 = K48 + K16, + Lens = [0,1,14,15,16,17,127,128, + K16-1,K16,K16+1,K16+(1 bsl 7)-1,K16+(1 bsl 7),K16+(1 bsl 7)+1, + K32-1,K32,K32+1,K32+(1 bsl 7)-1,K32+(1 bsl 7),K32+(1 bsl 7)+1, + K48-1,K48,K48+1,K48+(1 bsl 7)-1,K48+(1 bsl 7),K48+(1 bsl 7)+1, + K64-1,K64,K64+1,K64+(1 bsl 7)-1,K64+(1 bsl 7),K64+(1 bsl 7)+1, + K64+K16-1,K64+K16,K64+K16+1], + Types = ['Os','OsFrag'], + [fragmented_octet_string(Erules, Types, L) || L <- Lens], + fragmented_octet_string(Erules, ['FixedOs65536'], 65536), + fragmented_octet_string(Erules, ['FixedOs65537'], 65537), + + %% Make sure that octet alignment works. + roundtrip('OsAlignment', + {'OsAlignment',false,make_value(70000),true,make_value(66666), + false,make_value(65536),42}), + roundtrip('OsAlignment', + {'OsAlignment',false,make_value(0),true,make_value(0), + false,make_value(65536),42}), + ok. + +fragmented_octet_string(Erules, Types, L) -> + Value = make_value(L), + [begin + Encoded = enc_frag(Erules, Type, Value), + {ok,Value} = 'PrimStrings':decode(Type, Encoded) + end || Type <- Types], + ok. +enc_frag(Erules, Type, Value) -> + {ok,Encoded} = 'PrimStrings':encode(Type, Value), + case Erules of + ber -> + Encoded; + _ -> + %% Validate encoding with our own encoder. + Encoded = enc_frag_1(<<>>, list_to_binary(Value)) + end. + +enc_frag_1(Res, Bin0) -> + K16 = 1 bsl 14, + Sz = byte_size(Bin0), + if + Sz >= K16 -> + F = min(Sz div K16, 4), + FragSize = F * K16, + <<Frag:FragSize/binary-unit:8,Bin/binary>> = Bin0, + enc_frag_1(<<Res/binary,3:2,F:6,Frag/binary>>, Bin); + Sz >= 128 -> + <<Res/binary,1:1,0:1,Sz:14,Bin0/binary>>; + true -> + <<Res/binary,0:1,Sz:7,Bin0/binary>> + end. + +make_value(L) -> + make_value(L, 0, []). + +make_value(0, _, Acc) -> + Acc; +make_value(N, Byte, Acc) when Byte =< 255 -> + make_value(N-1, Byte+7, [Byte|Acc]); +make_value(N, Byte, Acc) -> + make_value(N, Byte band 16#FF, Acc). - numeric_string(Rules) -> %%========================================================== %% Ns ::= NumericString %%========================================================== - ?line {ok,BytesNs2} = asn1_wrapper:encode('PrimStrings','Ns',[]), - ?line {ok,[]} = asn1_wrapper:decode('PrimStrings','Ns',lists:flatten(BytesNs2)), + roundtrip('Ns', []), ?line case asn1_wrapper:erule(Rules) of ber -> @@ -455,10 +474,7 @@ numeric_string(Rules) -> %% NsCon ::= [70] NumericString %%========================================================== - ?line {ok,BytesNs12} = asn1_wrapper:encode('PrimStrings','NsCon',[]), - ?line {ok,[]} = asn1_wrapper:decode('PrimStrings','NsCon',lists:flatten(BytesNs12)), - - + roundtrip('NsCon', []), ?line case asn1_wrapper:erule(Rules) of ber -> @@ -482,10 +498,7 @@ numeric_string(Rules) -> %% NsExpCon ::= [71] EXPLICIT NumericString %%========================================================== - ?line {ok,BytesNs22} = asn1_wrapper:encode('PrimStrings','NsExpCon',[]), - ?line {ok,[]} = asn1_wrapper:decode('PrimStrings','NsExpCon',lists:flatten(BytesNs22)), - - + roundtrip('NsExpCon', []), ?line case asn1_wrapper:erule(Rules) of ber -> @@ -507,9 +520,6 @@ numeric_string(Rules) -> ok. - - - other_strings(_Rules) -> @@ -517,49 +527,27 @@ other_strings(_Rules) -> %% Ps ::= PrintableString %%========================================================== - ?line {ok,BytesPs1} = asn1_wrapper:encode('PrimStrings','Ps',[47,23,99,75,47]), - ?line {ok,[47,23,99,75,47]} = - asn1_wrapper:decode('PrimStrings','Ps',lists:flatten(BytesPs1)), - - ?line {ok,BytesPs2} = asn1_wrapper:encode('PrimStrings','Ps',[]), - ?line {ok,[]} = asn1_wrapper:decode('PrimStrings','Ps',lists:flatten(BytesPs2)), - + roundtrip('Ps', [47,23,99,75,47]), + roundtrip('Ps', []), %%========================================================== %% Vis ::= VisibleString %%========================================================== - ?line {ok,BytesVis1} = asn1_wrapper:encode('PrimStrings','Vis',[47,23,99,75,47]), - ?line {ok,[47,23,99,75,47]} = - asn1_wrapper:decode('PrimStrings','Vis',lists:flatten(BytesVis1)), - - ?line {ok,BytesVis2} = asn1_wrapper:encode('PrimStrings','Vis',[]), - ?line {ok,[]} = asn1_wrapper:decode('PrimStrings','Vis',lists:flatten(BytesVis2)), - + roundtrip('Vis', [47,23,99,75,47]), + roundtrip('Vis', []), %%========================================================== %% IA5 ::= IA5String %%========================================================== - ?line {ok,BytesIA51} = asn1_wrapper:encode('PrimStrings','IA5',[47,23,99,75,47]), - ?line {ok,[47,23,99,75,47]} = - asn1_wrapper:decode('PrimStrings','IA5',lists:flatten(BytesIA51)), - - ?line {ok,BytesIA52} = asn1_wrapper:encode('PrimStrings','IA5',[]), - ?line {ok,[]} = asn1_wrapper:decode('PrimStrings','IA5',lists:flatten(BytesIA52)), + roundtrip('IA5', [47,23,99,75,47]), + roundtrip('IA5', []), - IA5_1 = "12345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890", - - ?line {ok,BytesIA53} = asn1_wrapper:encode('PrimStrings','IA5',IA5_1), - ?line {ok,IA5_1r} = asn1_wrapper:decode('PrimStrings','IA5',lists:flatten(BytesIA53)), - ?line IA5_1 = IA5_1r, - - - - + roundtrip('IA5', IA5_1), ok. @@ -568,94 +556,60 @@ more_strings(_Rules) -> %% Ts ::= TeletexString %%========================================================== - ?line {ok,BytesTs1} = asn1_wrapper:encode('PrimStrings','Ts',[47,23,99,75,47]), - ?line {ok,[47,23,99,75,47]} = - asn1_wrapper:decode('PrimStrings','Ts',lists:flatten(BytesTs1)), - - ?line {ok,BytesTs2} = asn1_wrapper:encode('PrimStrings','Ts',[]), - ?line {ok,[]} = asn1_wrapper:decode('PrimStrings','Ts',lists:flatten(BytesTs2)), - + roundtrip('Ts', [47,23,99,75,47]), + roundtrip('Ts', []), %%========================================================== %% Vxs ::= VideotexString %%========================================================== - ?line {ok,BytesVxs1} = asn1_wrapper:encode('PrimStrings','Vxs',[47,23,99,75,47]), - ?line {ok,[47,23,99,75,47]} = - asn1_wrapper:decode('PrimStrings','Vxs',lists:flatten(BytesVxs1)), - - ?line {ok,BytesVxs2} = asn1_wrapper:encode('PrimStrings','Vxs',[]), - ?line {ok,[]} = asn1_wrapper:decode('PrimStrings','Vxs',lists:flatten(BytesVxs2)), - + roundtrip('Vxs', [47,23,99,75,47]), + roundtrip('Vxs', []), %%========================================================== %% Grs ::= GraphicString %%========================================================== - ?line {ok,BytesGrs1} = asn1_wrapper:encode('PrimStrings','Grs',[47,23,99,75,47]), - ?line {ok,[47,23,99,75,47]} = - asn1_wrapper:decode('PrimStrings','Grs',lists:flatten(BytesGrs1)), - - ?line {ok,BytesGrs2} = asn1_wrapper:encode('PrimStrings','Grs',[]), - ?line {ok,[]} = asn1_wrapper:decode('PrimStrings','Grs',lists:flatten(BytesGrs2)), + roundtrip('Grs',[47,23,99,75,47]), + roundtrip('Grs', []), %%========================================================== %% ODesc ::= ObjectDescriptor, test case for OTP-4161 %%========================================================== - ?line {ok,BytesODesc1} = asn1_wrapper:encode('PrimStrings','ODesc',[79,98,106,101,99,116,68,101,115,99,114,105,112,116,111,114]), - ?line {ok,[79,98,106,101,99,116,68,101,115,99,114,105,112,116,111,114]} = - asn1_wrapper:decode('PrimStrings','ODesc',lists:flatten(BytesODesc1)), - - ?line {ok,BytesODesc2} = asn1_wrapper:encode('PrimStrings','ODesc',[]), - ?line {ok,[]} = asn1_wrapper:decode('PrimStrings','ODesc',lists:flatten(BytesODesc2)), + roundtrip('ODesc', [79,98,106,101,99,116,68,101,115,99,114, + 105,112,116,111,114]), + roundtrip('ODesc', []), %%========================================================== %% Ges ::= GeneralString %%========================================================== - ?line {ok,BytesGes1} = asn1_wrapper:encode('PrimStrings','Ges',[47,23,99,75,47]), - ?line {ok,[47,23,99,75,47]} = - asn1_wrapper:decode('PrimStrings','Ges',lists:flatten(BytesGes1)), - - ?line {ok,BytesGes2} = asn1_wrapper:encode('PrimStrings','Ges',[]), - ?line {ok,[]} = asn1_wrapper:decode('PrimStrings','Ges',lists:flatten(BytesGes2)), - - ok. + roundtrip('Ges', [47,23,99,75,47]), + roundtrip('Ges', []), + ok. universal_string(Rules) -> - %%========================================================== %% Us ::= UniversalString %%========================================================== - ?line {ok,Bytes1} = - asn1_wrapper:encode('PrimStrings','Us',[{47,23,99,47},{0,0,55,66}]), - ?line {ok,[{47,23,99,47},{0,0,55,66}]} = - asn1_wrapper:decode('PrimStrings','Us',lists:flatten(Bytes1)), + roundtrip('Us', [{47,23,99,47},{0,0,55,66}]), ?line {ok,Bytes2} = asn1_wrapper:encode('PrimStrings','Us',[{47,23,99,255},{0,0,0,201}]), ?line {ok,[{47,23,99,255},201]} = asn1_wrapper:decode('PrimStrings','Us',lists:flatten(Bytes2)), - ?line {ok,Bytes3} = asn1_wrapper:encode('PrimStrings','Us',"Universal String"), - ?line {ok,"Universal String"} = - asn1_wrapper:decode('PrimStrings','Us',lists:flatten(Bytes3)), - - ?line {ok,Bytes4} = asn1_wrapper:encode('PrimStrings','Us',[]), - ?line {ok,[]} = asn1_wrapper:decode('PrimStrings','Us',lists:flatten(Bytes4)), - - ?line {ok,Bytes5} = asn1_wrapper:encode('PrimStrings','Us',[{47,23,99,47}]), - ?line {ok,[{47,23,99,47}]} = - asn1_wrapper:decode('PrimStrings','Us',lists:flatten(Bytes5)), - + roundtrip('Us', "Universal String"), + roundtrip('Us', []), + roundtrip('Us', [{47,23,99,47}]), ?line case asn1_wrapper:erule(Rules) of ber -> @@ -670,32 +624,22 @@ universal_string(Rules) -> Us1 = "12345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890", - ?line {ok,Bytes15} = asn1_wrapper:encode('PrimStrings','IA5',Us1), - ?line {ok,Us1r} = asn1_wrapper:decode('PrimStrings','IA5',lists:flatten(Bytes15)), - ?line Us1 = Us1r, - + roundtrip('IA5', Us1), %%========================================================== %% UsCon ::= [70] UniversalString %%========================================================== - ?line {ok,Bytes11} = - asn1_wrapper:encode('PrimStrings','UsCon',[{47,23,99,255},{0,0,2,201}]), - ?line {ok,[{47,23,99,255},{0,0,2,201}]} = - asn1_wrapper:decode('PrimStrings','UsCon',lists:flatten(Bytes11)), + roundtrip('UsCon', [{47,23,99,255},{0,0,2,201}]), ?line {ok,Bytes12} = asn1_wrapper:encode('PrimStrings','UsCon',[{47,23,99,255},{0,0,0,201}]), ?line {ok,[{47,23,99,255},201]} = asn1_wrapper:decode('PrimStrings','UsCon',lists:flatten(Bytes12)), - ?line {ok,Bytes13} = asn1_wrapper:encode('PrimStrings','UsCon',"Universal String"), - ?line {ok,"Universal String"} = - asn1_wrapper:decode('PrimStrings','UsCon',lists:flatten(Bytes13)), - - ?line {ok,Bytes14} = asn1_wrapper:encode('PrimStrings','UsCon',[]), - ?line {ok,[]} = asn1_wrapper:decode('PrimStrings','UsCon',lists:flatten(Bytes14)), + roundtrip('UsCon', "Universal String"), + roundtrip('UsCon', []), ?line case asn1_wrapper:erule(Rules) of ber -> @@ -712,25 +656,15 @@ universal_string(Rules) -> %% UsExpCon ::= [71] EXPLICIT UniversalString %%========================================================== - ?line {ok,Bytes21} = - asn1_wrapper:encode('PrimStrings','UsExpCon',[{47,23,99,255},{0,0,2,201}]), - ?line {ok,[{47,23,99,255},{0,0,2,201}]} = - asn1_wrapper:decode('PrimStrings','UsExpCon',lists:flatten(Bytes21)), + roundtrip('UsExpCon', [{47,23,99,255},{0,0,2,201}]), ?line {ok,Bytes22} = asn1_wrapper:encode('PrimStrings','UsExpCon',[{47,23,99,255},{0,0,0,201}]), ?line {ok,[{47,23,99,255},201]} = asn1_wrapper:decode('PrimStrings','UsExpCon',lists:flatten(Bytes22)), - ?line {ok,Bytes23} = - asn1_wrapper:encode('PrimStrings','UsExpCon',"Universal String"), - ?line {ok,"Universal String"} = - asn1_wrapper:decode('PrimStrings','UsExpCon',lists:flatten(Bytes23)), - - ?line {ok,Bytes24} = - asn1_wrapper:encode('PrimStrings','UsExpCon',[]), - ?line {ok,[]} = - asn1_wrapper:decode('PrimStrings','UsExpCon',lists:flatten(Bytes24)), + roundtrip('UsExpCon', "Universal String"), + roundtrip('UsExpCon', []), ?line case asn1_wrapper:erule(Rules) of ber -> @@ -740,12 +674,8 @@ universal_string(Rules) -> asn1_wrapper:decode('PrimStrings','UsExpCon',lists:flatten([16#BF,16#47,16,60,16#80,28,4,47,23,99,255,28,4,0,0,2,201,0,0])); _ -> ok end, - - -ok. - - + ok. bmp_string(_Rules) -> @@ -754,29 +684,18 @@ bmp_string(_Rules) -> %% BMP ::= BMPString %%========================================================== - ?line {ok,Bytes1} = - asn1_wrapper:encode('PrimStrings','BMP',[{0,0,99,48},{0,0,2,201}]), - ?line {ok,[{0,0,99,48},{0,0,2,201}]} = - asn1_wrapper:decode('PrimStrings','BMP',lists:flatten(Bytes1)), + roundtrip('BMP', [{0,0,99,48},{0,0,2,201}]), ?line {ok,Bytes2} = asn1_wrapper:encode('PrimStrings','BMP',[{0,0,0,48},{0,0,2,201}]), ?line {ok,[48,{0,0,2,201}]} = asn1_wrapper:decode('PrimStrings','BMP',lists:flatten(Bytes2)), - - ?line {ok,Bytes3} = asn1_wrapper:encode('PrimStrings','BMP',"BMP String"), - ?line {ok,"BMP String"} = - asn1_wrapper:decode('PrimStrings','BMP',lists:flatten(Bytes3)), - - ?line {ok,Bytes4} = asn1_wrapper:encode('PrimStrings','BMP',[]), - ?line {ok,[]} = asn1_wrapper:decode('PrimStrings','BMP',lists:flatten(Bytes4)), + roundtrip('BMP', "BMP String"), + roundtrip('BMP', []), BMP1 = "12345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890123456789012345678901234567890", - ?line {ok,Bytes5} = asn1_wrapper:encode('PrimStrings','BMP',BMP1), - ?line {ok,BMP1r} = asn1_wrapper:decode('PrimStrings','BMP',lists:flatten(Bytes5)), - ?line BMP1 = BMP1r, - + roundtrip('BMP', BMP1), ok. @@ -790,35 +709,17 @@ times(_Rules) -> %% Gt ::= GeneralizedTime %%========================================================== - ?line {ok,Bytes1} = asn1_wrapper:encode('PrimStrings','Gt',"19970923110723.2"), - ?line {ok,"19970923110723.2"} = - asn1_wrapper:decode('PrimStrings','Gt',lists:flatten(Bytes1)), + roundtrip('Gt', "19970923110723.2"), + roundtrip('Gt', "19970923110723.2Z"), + roundtrip('Gt', "19970923110723.2-0500"), - ?line {ok,Bytes2} = asn1_wrapper:encode('PrimStrings','Gt',"19970923110723.2Z"), - ?line {ok,"19970923110723.2Z"} = - asn1_wrapper:decode('PrimStrings','Gt',lists:flatten(Bytes2)), - - ?line {ok,Bytes3} = asn1_wrapper:encode('PrimStrings','Gt',"19970923110723.2-0500"), - ?line {ok,"19970923110723.2-0500"} = - asn1_wrapper:decode('PrimStrings','Gt',lists:flatten(Bytes3)), - - - - - - %%========================================================== %% UTC ::= UTCTime %%========================================================== - ?line {ok,Bytes11} = asn1_wrapper:encode('PrimStrings','UTC',"9709211107Z"), - ?line {ok,"9709211107Z"} = - asn1_wrapper:decode('PrimStrings','UTC',lists:flatten(Bytes11)), - - ?line {ok,Bytes12} = asn1_wrapper:encode('PrimStrings','UTC',"9709211107-0500"), - ?line {ok,"9709211107-0500"} = - asn1_wrapper:decode('PrimStrings','UTC',lists:flatten(Bytes12)), + roundtrip('UTC', "9709211107Z"), + roundtrip('UTC', "9709211107-0500"), ok. @@ -917,3 +818,8 @@ wrapper_utf8_binary_to_list(L) when is_list(L) -> asn1rt:utf8_binary_to_list(list_to_binary(L)); wrapper_utf8_binary_to_list(B) -> asn1rt:utf8_binary_to_list(B). + +roundtrip(Type, Value) -> + {ok,Encoded} = 'PrimStrings':encode(Type, Value), + {ok,Value} = 'PrimStrings':decode(Type, Encoded), + ok. diff --git a/lib/asn1/test/testSSLspecs.erl b/lib/asn1/test/testSSLspecs.erl index 51ef134e5f..45c5da50f0 100644 --- a/lib/asn1/test/testSSLspecs.erl +++ b/lib/asn1/test/testSSLspecs.erl @@ -42,11 +42,11 @@ compile(Config, Options) -> asn1_test_lib:compile_all(["PKIX1Explicit93", "PKIX1Implicit93"], Config, NewOptions). -compile_inline(Config, Rule) when Rule == ber_bin; Rule == ber_bin_v2 -> +compile_inline(Config, ber=Rule) -> DataDir = ?config(data_dir, Config), CaseDir = ?config(case_dir, Config), Options = [{i, CaseDir}, {i, DataDir}, Rule, - der, compact_bit_string, optimize, asn1config, inline], + der, compact_bit_string, asn1config, inline], ok = remove_db_file_inline(CaseDir), asn1_test_lib:compile("OTP-PKIX.set.asn", Config, Options); compile_inline(_Config, _Rule) -> @@ -73,7 +73,7 @@ remove_db_file_inline(Dir) -> ?line ok = remove_db_file(Dir ++ "PKIX1Explicit88.asn1db"), ?line ok = remove_db_file(Dir ++ "PKIX1Implicit88.asn1db"). -run(BER) when BER==ber_bin;BER==ber_bin_v2 -> +run(ber) -> run1(1); run(_) -> ok. @@ -100,20 +100,20 @@ transform1(ATAV) -> ?line {ok, ATAVEnc} = 'PKIX1Explicit88':encode('AttributeTypeAndValue', ATAV), ?line {ok, _ATAVDec} = 'SSL-PKIX':decode('AttributeTypeAndValue', - list_to_binary(ATAVEnc)). + ATAVEnc). transform2(ATAV) -> ?line {ok, ATAVEnc} = 'PKIX1Explicit88':encode('AttributeTypeAndValue', ATAV), ?line {ok, _ATAVDec} = 'PKIX1Explicit88':decode('AttributeTypeAndValue', - list_to_binary(ATAVEnc)). + ATAVEnc). transform4(ATAV) -> ?line {ok, ATAVEnc} = 'PKIX1Explicit88':encode('Attribute', ATAV), ?line {ok, _ATAVDec} = 'PKIX1Explicit88':decode('Attribute', - list_to_binary(ATAVEnc)). + ATAVEnc). ex(1) -> @@ -146,7 +146,7 @@ ex(7) -> {1,2,840,113549,1,9,1}, [[19,5,111,116,112,67,65]]}. -run_inline(Rule) when Rule==ber_bin;Rule==ber_bin_v2 -> +run_inline(ber) -> Cert = cert(), ?line {ok,{'CertificatePKIX1Explicit88',{Type,UnDec},_,_}} = 'OTP-PKIX':decode_TBSCert_exclusive(Cert), ?line {ok,_} = 'OTP-PKIX':decode_part(Type,UnDec), diff --git a/lib/asn1/test/testSeqIndefinite.erl b/lib/asn1/test/testSeqIndefinite.erl index 25742474bb..c7b8aba523 100644 --- a/lib/asn1/test/testSeqIndefinite.erl +++ b/lib/asn1/test/testSeqIndefinite.erl @@ -23,13 +23,7 @@ -include_lib("test_server/include/test_server.hrl"). - -main(per_bin) -> ok; main(per) -> ok; -main(ber_bin_v2) -> - main(ber); -main(ber_bin) -> - main(ber); main(ber) -> %% normal encoding diff --git a/lib/asn1/test/testSeqOf.erl b/lib/asn1/test/testSeqOf.erl index 0c0bbc3e66..1aa1eab26d 100644 --- a/lib/asn1/test/testSeqOf.erl +++ b/lib/asn1/test/testSeqOf.erl @@ -198,19 +198,10 @@ main(Rules) -> ?line {ok,Bytes51} = asn1_wrapper:encode('SeqOf','SeqEmp',#'SeqEmp'{seq1 = [#'Empty'{}]}), ?line {ok,{'SeqEmp',[{'Empty'}]}} = asn1_wrapper:decode('SeqOf','SeqEmp',lists:flatten(Bytes51)), - - case Rules of - ber -> - ?line {ok,Bytes52} = asn1_wrapper:encode('SeqOfEnum','SeqOfEnum', - {'SeqOfEnum',[{'Enum',a},{'Enum',b}]}), - ?line {ok,[a,b]} = asn1_wrapper:decode('SeqOfEnum','SeqOfEnum', - lists:flatten(Bytes52)); - _ -> ok - end, %% tests of OTP-4590 case Rules of - PER when PER == per; PER == per_bin -> + per -> DayNames = ["Monday","Tuesday","Wednesday","Thursday","Friday","Saturday","Sunday"], ?line {ok,Bytes60} = asn1_wrapper:encode('XSeqOf','DayNames2',DayNames), ?line {ok,Bytes60} = asn1_wrapper:encode('XSeqOf','DayNames4',DayNames), diff --git a/lib/asn1/test/testSetIndefinite.erl b/lib/asn1/test/testSetIndefinite.erl index d8e2b6a9cf..73006da62b 100644 --- a/lib/asn1/test/testSetIndefinite.erl +++ b/lib/asn1/test/testSetIndefinite.erl @@ -24,12 +24,7 @@ -include_lib("test_server/include/test_server.hrl"). -main(per_bin) -> ok; main(per) -> ok; -main(ber_bin_v2) -> - main(ber); -main(ber_bin) -> - main(ber); main(ber) -> %% normal encoding diff --git a/lib/asn1/test/testSetOptional.erl b/lib/asn1/test/testSetOptional.erl index 4692941524..cef90bc843 100644 --- a/lib/asn1/test/testSetOptional.erl +++ b/lib/asn1/test/testSetOptional.erl @@ -181,7 +181,7 @@ main(_Rules) -> ok. -ticket_7533(Ber) when Ber == ber; Ber == ber_bin -> +ticket_7533(Ber) when Ber == ber -> Val = #'SetOpt1'{bool1 = true,int1=12,set1=#'SetIn'{boolIn=false,intIn=13}}, ?line {ok,B} = asn1_wrapper:encode('SetOptional','SetOpt1',Val), ?line {ok,Val} = asn1_wrapper:decode('SetOptional','SetOpt1',B), diff --git a/lib/asn1/test/testTCAP.erl b/lib/asn1/test/testTCAP.erl index 878ce7c070..b723995e40 100644 --- a/lib/asn1/test/testTCAP.erl +++ b/lib/asn1/test/testTCAP.erl @@ -37,7 +37,7 @@ compile_asn1config(Config, Options) -> asn1_test_lib:compile_all(Files, Config, Options), asn1_test_lib:compile_erlang("TCAPPackage_msg", Config, []). -test(Erule,_Config) when Erule==ber;Erule==ber_bin;Erule==ber_bin_v2 -> +test(ber=Erule,_Config) -> % ?line OutDir = ?config(priv_dir,Config), %% testing OTP-4798, open type encoded with indefinite length ?line {ok,_Res} = asn1_wrapper:decode('TCAPMessages-simple','MessageType', val_OTP_4798(Erule)), @@ -81,7 +81,7 @@ test_asn1config() -> ?line Val2 = 'TCAPPackage_msg':val('TransactionPDU'), ?line {ok,B2} = 'TCAPPackage':encode('TransactionPDU',Val2), - ?line {ok,ExMsg2}='TCAPPackage':decode_TransactionPDU(list_to_binary(B2)), + {ok,ExMsg2}='TCAPPackage':decode_TransactionPDU(B2), ?line {_,_,_,{Key2,ExVal2}}=ExMsg2, ?line {ok,_Parts2}='TCAPPackage':decode_part(Key2,ExVal2), diff --git a/lib/asn1/test/testTimer.erl b/lib/asn1/test/testTimer.erl index 2d3b777558..cd7ceb5630 100644 --- a/lib/asn1/test/testTimer.erl +++ b/lib/asn1/test/testTimer.erl @@ -133,23 +133,7 @@ go(Config,Enc) -> Module = 'H323-MESSAGES', Type = 'H323-UserInformation', Value = val(), -%% ok = asn1ct:compile(HelpModule,[Enc]), - -%% ok = asn1ct:compile(Module,[Enc]), - ?line {ok,B} = asn1rt:encode(Module,Type,Value), - Bytes = case Enc of - ber_bin -> - list_to_binary(B); - per_bin when is_list(B) -> - list_to_binary(B); - per_bin -> - B; - uper_bin -> - B; - _ -> - %%lists:flatten(B) - list_to_binary(B) - end, + {ok,Bytes} = asn1rt:encode(Module,Type,Value), CompileOptions = compile_options(), @@ -181,35 +165,18 @@ encode(N, Module,Type,Value) -> decode(0, _Module,_Type,_Value,_Erule) -> done; decode(N, Module,Type,Value,Erule) -> - case Erule of - ber -> - ?line {ok,_B} = asn1rt:decode(Module,Type,binary_to_list(Value)); - per -> - ?line {ok,_B} = asn1rt:decode(Module,Type,binary_to_list(Value)); - _ -> - ?line {ok,_B} = asn1rt:decode(Module,Type,Value) - end, + {ok,_B} = asn1rt:decode(Module,Type,Value), decode(N-1, Module,Type,Value,Erule). compile_options() -> - ?line {ok,Info} = asn1rt:info('H323-MESSAGES'), - case lists:keysearch(options,1,Info) of - {_,{_,Opts}} -> - Opts2 = - case lists:member(ber_bin_v2,Opts) of - true -> - [ber_bin,optimize] ++ lists:delete(optimize,Opts); - _ -> - Opts - end, - Opts3 = [X||X <- Opts2, - (X == ber orelse - X == ber_bin orelse - X == per orelse - X == per_bin orelse - X == optimize orelse - X == driver)], - lists:flatten(io_lib:format("~p",[Opts3])); + {ok,Info} = asn1rt:info('H323-MESSAGES'), + case lists:keyfind(options, 1, Info) of + {_,Opts0} -> + Opts1 = [X || X <- Opts0, + (X =:= ber orelse + X =:= per orelse + X =:= uper)], + lists:flatten(io_lib:format("~p", [Opts1])); _ -> "[]" end. diff --git a/lib/asn1/test/testTypeValueNotation.erl b/lib/asn1/test/testTypeValueNotation.erl index cd5223ef23..59f7385f08 100644 --- a/lib/asn1/test/testTypeValueNotation.erl +++ b/lib/asn1/test/testTypeValueNotation.erl @@ -21,11 +21,9 @@ -export([main/2]). --include_lib("test_server/include/test_server.hrl"). - -record('Seq', {octstr, int, bool, enum, bitstr, null, oid, vstr}). -main(Rule, Option) -> +main(_Rule, _Option) -> Value1 = #'Seq'{octstr = [1, 2, 3, 4], int = 12, bool = true, @@ -34,28 +32,5 @@ main(Rule, Option) -> null = 'NULL', oid = {1, 2, 55}, vstr = "Hello World"}, - Value2 = #'Seq'{octstr = {'OctStr', [1, 2, 3, 4]}, - int = {'Int', 12}, - bool = {'Bool', true}, - enum = {'Enum', a}, - bitstr = {'BitStr', [1, 0, 1, 0]}, - null = {'Null', 'NULL'}, - oid = {'OId', {1, 2, 55}}, - vstr = {'VStr', "Hello World"}}, - main(Rule, Option, Value1, Value2). - -%% Value2 will fail for ber_bin_v2, per_bin with nifs (optimize) and uper_bin -main(ber_bin_v2, _, Value1, Value2) -> encode_fail(Value1, Value2); -main(per_bin, [optimize], Value1, Value2) -> encode_fail(Value1, Value2); -main(uper_bin, [], Value1, Value2) -> encode_fail(Value1, Value2); -main(_, _, Value1, Value2) -> encode_normal(Value1, Value2). - -encode_normal(Value1, Value2) -> - {ok, Bytes} = asn1_wrapper:encode('SeqTypeRefPrim', 'Seq', Value1), - {ok, Bytes} = asn1_wrapper:encode('SeqTypeRefPrim', 'Seq', Value2), - {ok, Value1} = asn1_wrapper:decode('SeqTypeRefPrim', 'Seq', Bytes). - -encode_fail(Value1, Value2) -> - {ok, Bytes} = asn1_wrapper:encode('SeqTypeRefPrim', 'Seq', Value1), - {error, _Reason} = asn1_wrapper:encode('SeqTypeRefPrim', 'Seq', Value2), - {ok, Value1} = asn1_wrapper:decode('SeqTypeRefPrim', 'Seq', Bytes). + {ok, Bytes} = asn1_wrapper:encode('SeqTypeRefPrim', 'Seq', Value1), + {ok, Value1} = asn1_wrapper:decode('SeqTypeRefPrim', 'Seq', Bytes). diff --git a/lib/asn1/test/testX420.erl b/lib/asn1/test/testX420.erl index abdbbfe536..52b20a2c70 100644 --- a/lib/asn1/test/testX420.erl +++ b/lib/asn1/test/testX420.erl @@ -34,7 +34,7 @@ compile(Erule, Options, Config) -> compile_loop(_Erule, [], _Options, _Config) -> ok; compile_loop(Erule, [Spec|Specs], Options, Config) - when Erule == ber; Erule == ber_bin; Erule == ber_bin_v2; Erule == per -> + when Erule =:= ber; Erule =:= per -> CaseDir = ?config(case_dir, Config), asn1_test_lib:compile(filename:join([x420, Spec]), Config, [Erule, {i, CaseDir}]), diff --git a/lib/asn1/test/test_compile_options.erl b/lib/asn1/test/test_compile_options.erl index 4e732308d8..b973c5fbcc 100644 --- a/lib/asn1/test/test_compile_options.erl +++ b/lib/asn1/test/test_compile_options.erl @@ -92,7 +92,8 @@ noobj(Config) -> file:delete(filename:join([OutDir,'P-Record.beam'])), file:delete(filename:join([OutDir,'p_record.erl'])), file:delete(filename:join([OutDir,'p_record.beam'])), - ?line ok=asn1ct:compile(filename:join([DataDir,"p_record.set.asn"]),[asn1config,ber_bin,optimize,noobj,{outdir,OutDir}]), + ok = asn1ct:compile(filename:join([DataDir,"p_record.set.asn"]), + [asn1config,ber,noobj,{outdir,OutDir}]), %% ?line false = code:is_loaded('P-Record'), %% ?line false = code:is_loaded('p_record'), ?line {error,enoent} = diff --git a/lib/asn1/test/test_inline.erl b/lib/asn1/test/test_inline.erl index 62625572e3..e03ad739f9 100644 --- a/lib/asn1/test/test_inline.erl +++ b/lib/asn1/test/test_inline.erl @@ -41,16 +41,16 @@ inline1(Config, Rule, Opt) -> asn1_test_lib:compile("P-Record", Config, [{inline, 'inlined_P_Record'}|Opt]), test_inline1(), - ok=remove_inlined_files2(CaseDir, ber_bin_v2), + ok=remove_inlined_files2(CaseDir, ber), case Rule of - ber_bin_v2 -> + ber -> asn1_test_lib:compile("P-Record", Config, - [ber_bin, inline, asn1config, optimize|Opt]), + [ber, inline, asn1config|Opt]), test_inline2(Rule, 'P-Record'), remove_inlined_files3(CaseDir, Rule), asn1_test_lib:compile("p_record.set.asn", Config, - [ber_bin, inline, asn1config, optimize|Opt]), + [ber, inline, asn1config|Opt]), test_inline2(Rule, 'p_record'), remove_inlined_files4(CaseDir, Rule); _ -> @@ -71,12 +71,12 @@ test_inline1() -> ?line {ok,_}=asn1_wrapper:decode('inlined_P_Record', 'PersonnelRecord',Bytes). -test_inline2(ber_bin_v2,Mod) -> +test_inline2(ber,Mod) -> PRecMsg = {'PersonnelRecord',{'Name',"Sven","S","Svensson"}, "manager",123,"20000202",{'Name',"Inga","K","Svensson"}, asn1_DEFAULT}, ?line {ok,Bytes} = Mod:encode('PersonnelRecord',PRecMsg), - ?line {ok,_} = Mod:sel_dec(list_to_binary(Bytes)); + {ok,_} = Mod:sel_dec(Bytes); test_inline2(_,_) -> ok. @@ -243,7 +243,7 @@ remove_inlined_files2(Dir,Rule) -> ?line ok=file:delete(X) end,[TargetErl,TargetBeam]), ok. -remove_inlined_files3(Dir,ber_bin_v2) -> +remove_inlined_files3(Dir,ber) -> Erl=filename:join([Dir,"P-Record.erl"]), Beam=filename:join([Dir,"P-Record.beam"]), Asn1DB=filename:join([Dir,"P-Record.asn1db"]), @@ -255,7 +255,7 @@ remove_inlined_files3(Dir,ber_bin_v2) -> remove_inlined_files3(_,_) -> ok. -remove_inlined_files4(Dir,ber_bin_v2) -> +remove_inlined_files4(Dir,ber) -> Erl=filename:join([Dir,"p_record.erl"]), Beam=filename:join([Dir,"p_record.beam"]), Asn1DB=filename:join([Dir,"p_record.asn1db"]), diff --git a/lib/asn1/test/test_special_decode_performance.erl b/lib/asn1/test/test_special_decode_performance.erl index 4ac0ff2b27..dd56d29b28 100644 --- a/lib/asn1/test/test_special_decode_performance.erl +++ b/lib/asn1/test/test_special_decode_performance.erl @@ -33,7 +33,7 @@ go(all) -> go(N,Mod) -> ?line Val = val(Mod), ?line {ok,B} = Mod:encode(element(1,Val),Val), - ?line go(Mod,list_to_binary(B),N). + ?line go(Mod,B,N). go(Mod,Bin,N) -> ?line FsS = get_selective_funcs(Mod), diff --git a/lib/common_test/doc/src/cover_chapter.xml b/lib/common_test/doc/src/cover_chapter.xml index 803a71de07..b2e64bfff0 100644 --- a/lib/common_test/doc/src/cover_chapter.xml +++ b/lib/common_test/doc/src/cover_chapter.xml @@ -109,6 +109,33 @@ </section> <section> + <marker id="cover_stop"></marker> + <title>Stopping the cover tool when tests are completed</title> + <p>By default the Cover tool is automatically stopped when the + tests are completed. This causes the original (non cover + compiled) modules to be loaded back in to the test node. If a + process at this point is still running old code of any of the + modules that are cover compiled, meaning that it has not done + any fully qualified function call after the cover compilation, + the process will now be killed. To avoid this it is possible to + set the value of the <c>cover_stop</c> option to + <c>false</c>. This means that the modules will stay cover + compiled, and it is therefore only recommended if the erlang + node(s) under test is terminated after the test is completed + or if cover can be manually stopped.</p> + + <p>The option can be set by using the <c>-cover_stop</c> flag with + <c>ct_run</c>, by adding <c>{cover_stop,true|false}</c> to the + Opts argument to <c><seealso + marker="ct#run_test-1">ct:run_test/1</seealso></c>, or by adding + a <c>cover_stop</c> term in your test specification (see chapter + about <seealso + marker="run_test_chapter#test_specifications">test + specifications</seealso>).</p> + + </section> + + <section> <title>The cover specification file</title> <p>These are the terms allowed in a cover specification file:</p> diff --git a/lib/common_test/doc/src/ct_run.xml b/lib/common_test/doc/src/ct_run.xml index 9cc5495af7..0750f560b3 100644 --- a/lib/common_test/doc/src/ct_run.xml +++ b/lib/common_test/doc/src/ct_run.xml @@ -90,7 +90,7 @@ <pre> ct_run [-dir TestDir1 TestDir2 .. TestDirN] | [[-dir TestDir] -suite Suite1 Suite2 .. SuiteN - [[-group Group1 Group2 .. GroupN] [-case Case1 Case2 .. CaseN]]] + [[-group Groups1 Groups2 .. GroupsN] [-case Case1 Case2 .. CaseN]]] [-step [config | keep_inactive]] [-config ConfigFile1 ConfigFile2 .. ConfigFileN] [-userconfig CallbackModule1 ConfigString1 and CallbackModule2 @@ -104,6 +104,7 @@ [-silent_connections [ConnType1 ConnType2 .. ConnTypeN]] [-stylesheet CSSFile] [-cover CoverCfgFile] + [-cover_stop Bool] [-event_handler EvHandler1 EvHandler2 .. EvHandlerN] | [-event_handler_init EvHandler1 InitArg1 and EvHandler2 InitArg2 and .. EvHandlerN InitArgN] @@ -138,6 +139,7 @@ [-silent_connections [ConnType1 ConnType2 .. ConnTypeN]] [-stylesheet CSSFile] [-cover CoverCfgFile] + [-cover_stop Bool] [-event_handler EvHandler1 EvHandler2 .. EvHandlerN] | [-event_handler_init EvHandler1 InitArg1 and EvHandler2 InitArg2 and .. EvHandlerN InitArgN] diff --git a/lib/common_test/doc/src/notes.xml b/lib/common_test/doc/src/notes.xml index abe8cb2041..7e33b71de1 100644 --- a/lib/common_test/doc/src/notes.xml +++ b/lib/common_test/doc/src/notes.xml @@ -32,6 +32,100 @@ <file>notes.xml</file> </header> +<section><title>Common_Test 1.6.3</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + The ct:run_test/1 option 'config' only worked with a + single config file, not a list of files. This has been + fixed.</p> + <p> + Own Id: OTP-10495</p> + </item> + <item> + <p> + ct_netconfc:close_session sometimes returned + {error,closed} because the ssh connection was closed + (from the server side) before the rpc-reply was received + by the client. This is normal and can not be helped. It + has been corrected so the return will be 'ok' in this + case. Other error situations will still give + {error,Reason}.</p> + <p> + Own Id: OTP-10510 Aux Id: kunagi-320 [231] </p> + </item> + <item> + <p> + ct_netconfc:close_session sometimes returned + {error,closed} or (if the connection was named) + {error,{process_down,Pid,normal}} because the ssh + connection was closed (from the server side) before the + rpc-reply was received by the client. This is normal and + can not be helped. It has been corrected so the return + will be 'ok' in this situation.</p> + <p> + Own Id: OTP-10570</p> + </item> + <item> + <p> + Fix bug where ct:require of same name with same config + would return name_in_use.</p> + <p> + Own Id: OTP-10572</p> + </item> + </list> + </section> + + + <section><title>Improvements and New Features</title> + <list> + <item> + <p> + A new test case group search functionality has been + implemented that makes Common Test search automatically + through the group definitions tree (the return value of + groups/0) and create tests for all paths of nested groups + that match the specification. It also allows for + specifying unique paths to sub groups in order to avoid + execution of unwanted tests. This new feature can be used + whenever starting a test run by means of the ct_run + program, the ct:run_test/1 API function, or a Test + Specification. Details can be found in the Test Case + Group Execution section in the Running Tests chapter.</p> + <p> + Own Id: OTP-10466 Aux Id: kunagi-276 [187] </p> + </item> + </list> + </section> + + + <section><title>Known Bugs and Problems</title> + <list> + <item> + <p> + Restore Config data if lost when test case fails.</p> + <p> + Own Id: OTP-10070 Aux Id: kunagi-175 [86] </p> + </item> + <item> + <p> + IO server error in test_server.</p> + <p> + Own Id: OTP-10125 Aux Id: OTP-10101, kunagi-177 [88] </p> + </item> + <item> + <p> + Faulty connection handling in common_test.</p> + <p> + Own Id: OTP-10126 Aux Id: kunagi-178 [89] </p> + </item> + </list> + </section> + +</section> + <section><title>Common_Test 1.6.2.1</title> <section><title>Fixed Bugs and Malfunctions</title> diff --git a/lib/common_test/doc/src/run_test_chapter.xml b/lib/common_test/doc/src/run_test_chapter.xml index ea62df27cc..b804f134c6 100644 --- a/lib/common_test/doc/src/run_test_chapter.xml +++ b/lib/common_test/doc/src/run_test_chapter.xml @@ -119,7 +119,7 @@ <item><c><![CDATA[ct_run -userconfig <callbackmodulename> <configfilenames> -suite <suiteswithfullpath>]]></c> </item> <item><c><![CDATA[ct_run -config <configfilenames> -suite <suitewithfullpath> - -group <groupnames> -case <casenames>]]></c></item> + -group <groups> -case <casenames>]]></c></item> </list> <p>Examples:</p> <p><c>$ ct_run -config $CFGS/sys1.cfg $CFGS/sys2.cfg -dir $SYS1_TEST $SYS2_TEST</c></p> @@ -137,6 +137,8 @@ <p><c>$ ct_run -suite ./testdir/x_SUITE ./testdir/y_SUITE</c></p> + <p>For more details on <seealso marker="run_test_chapter#group_execution">test case group execution</seealso>, please see below.</p> + <p>Other flags that may be used with <c>ct_run</c>:</p> <list> <item><c><![CDATA[-logdir <dir>]]></c>, specifies where the HTML log files are to be written.</item> @@ -153,6 +155,8 @@ <item><c><![CDATA[-stylesheet <css_file>]]></c>, points out a user HTML style sheet (see below).</item> <item><c><![CDATA[-cover <cover_cfg_file>]]></c>, to perform code coverage test (see <seealso marker="cover_chapter#cover">Code Coverage Analysis</seealso>).</item> + <item><c><![CDATA[-cover_stop <bool>]]></c>, to specify if the cover tool shall be stopped after the test is completed (see + <seealso marker="cover_chapter#cover_stop">Code Coverage Analysis</seealso>).</item> <item><c><![CDATA[-event_handler <event_handlers>]]></c>, to install <seealso marker="event_handler_chapter#event_handling">event handlers</seealso>.</item> <item><c><![CDATA[-event_handler_init <event_handlers>]]></c>, to install @@ -267,6 +271,163 @@ <c><seealso marker="ct#run_test-1">ct</seealso></c> manual page.</p> </section> + <marker id="group_execution"></marker> + <section> + <title>Test case group execution</title> + + <p>With the <c>ct_run</c> flag, or <c>ct:run_test/1</c> option <c>group</c>, + one or more test case groups can be specified, optionally in combination + with specific test cases. The syntax for specifying groups is as follows + (on the command line):</p> + + <pre> + <![CDATA[$ ct_run -group <group_names_or_paths> [-case <cases>]]]></pre> + <p>or (in the Erlang shell):</p> + <pre> + <![CDATA[1> ct:run_test([{group,GroupsNamesOrPaths}, {case,Cases}]).]]></pre> + + <p>The <c>group_names_or_paths</c> parameter specifies either one + or more group names and/or one or more group paths. At start up, + Common Test will search for matching groups in the group definitions + tree (i.e. the list returned from <c>Suite:groups/0</c>, please see the + <seealso marker="write_test_chapter#test_case_groups">Test case groups</seealso> + chapter for details). + Given a group name, say <c>g</c>, Common Test will search for all paths + that lead to <c>g</c>. By path here we mean a sequence of nested groups, + all of which have to be followed in order to get from the top level + group to <c>g</c>. Actually, what Common Test needs to do in order to + execute the test cases in group <c>g</c>, is to call the + <c>init_per_group/2</c> function for each group in the path to + <c>g</c>, as well as all corresponding <c>end_per_group/2</c> + functions afterwards. The obvious reason for this is that the configuration + of a test case in <c>g</c> (and its <c>Config</c> input data) depends on + <c>init_per_testcase(TestCase, Config)</c> and its return value, which + in turn depends on <c>init_per_group(g, Config)</c> and its return value, + which in turn depends on <c>init_per_group/2</c> of the group above + <c>g</c>, etc, all the way up to the top level group.</p> + + <p>As you may have already realized, this means that if there is more than + one way to locate a group (and its test cases) in a path, the result of the + group search operation is a number of tests, all of which will be performed. + Common Test actually interprets a group specification that consists of a + single name this way:</p> + + <p>"Search and find all paths in the group definitions tree that lead + to the specified group and, for each path, create a test which (1) executes + all configuration functions in the path to the specified group, then (2) + executes all - or all matching - test cases in this group, as well as (3) + all - or all matching - test cases in all sub groups of the group". + </p> + + <p>It is also possible for the user to specify a specific group path with + the <c>group_names_or_paths</c> parameter. With this type of specification it's + possible to avoid execution of unwanted groups (in otherwise matching paths), + and/or the execution of sub groups. The syntax of the group path is a list of + group names in the path, e.g. on the command line: + </p> + <p><c>$ ct_run -suite "./x_SUITE" -group [g1,g3,g4] -case tc1 tc5</c></p> + <p>or similarly in the Erlang shell (requires a list within the groups list):</p> + <p><c>1> ct:run_test([{suite,"./x_SUITE"}, {group,[[g1,g3,g4]]}, {testcase,[tc1,tc5]}]).</c></p> + + <p>The last group in the specified path will be the terminating group in + the test, i.e. no sub groups following this group will be executed. In the + example above, <c>g4</c> is the terminating group, hence Common Test will + execute a test that calls all init configuration functions in the path to + <c>g4</c>, i.e. <c>g1..g3..g4</c>. It will then call test cases <c>tc1</c> + and <c>tc5</c> in <c>g4</c> and finally all end configuration functions in order + <c>g4..g3..g1</c>.</p> + + <p>Note that the group path specification doesn't necessarily + have to include <em>all</em> groups in the path to the terminating group. + Common Test will search for all matching paths if given an incomplete group + path.</p> + + <p>Note also that it's possible to combine group names and group paths with the + <c>group_names_or_paths</c> parameter. Each element is treated as + an individual specification in combination with the <c>cases</c> parameter. + See examples below.</p> + + <p>Examples:</p> + <pre> + -module(x_SUITE). + ... + %% The group definitions: + groups() -> + [{top1,[],[tc11,tc12, + {sub11,[],[tc12,tc13]}, + {sub12,[],[tc14,tc15, + {sub121,[],[tc12,tc16]}]}]}, + + {top2,[],[{group,sub21},{group,sub22}]}, + {sub21,[],[tc21,{group,sub2X2}]}, + {sub22,[],[{group,sub221},tc21,tc22,{group,sub2X2}]}, + {sub221,[],[tc21,tc23]}, + {sub2X2,[],[tc21,tc24]}]. + </pre> + <br></br> + <p><c>$ ct_run -suite "x_SUITE" -group all</c></p> + <p><c>1> ct:run_test([{suite,"x_SUITE"}, {group,all}]).</c></p> + <p>Two tests will be executed, one for all cases and all sub groups under <c>top1</c>, + and one for all under <c>top2</c>. (We would get the same result with + <c>-group top1 top2</c>, or <c>{group,[top1,top2]}</c>.</p> + <br></br> + <p><c>$ ct_run -suite "x_SUITE" -group top1</c></p> + <p><c>1> ct:run_test([{suite,"x_SUITE"}, {group,[top1]}]).</c></p> + <p>This will execute one test for all cases and sub groups under <c>top1</c>.</p> + <br></br> + <p><c>$ ct_run -suite "x_SUITE" -group top1 -case tc12</c></p> + <p><c>1> ct:run_test([{suite,"x_SUITE"}, {group,[top1]}, {testcase,[tc12]}]).</c></p> + <p>This will run a test that executes <c>tc12</c> in <c>top1</c> and any sub group + under <c>top1</c> where it can be found (<c>sub11</c> and <c>sub121</c>).</p> + <br></br> + <p><c>$ ct_run -suite "x_SUITE" -group [top1] -case tc12</c></p> + <p><c>1> ct:run_test([{suite,"x_SUITE"}, {group,[[top1]]}, {testcase,[tc12]}]).</c></p> + <p>This will execute <c>tc12</c> <em>only</em> in group <c>top1</c>.</p> + <br></br> + <p><c>$ ct_run -suite "x_SUITE" -group top1 -case tc16</c></p> + <p><c>1> ct:run_test([{suite,"x_SUITE"}, {group,[top1]}, {testcase,[tc16]}]).</c></p> + <p>This will search <c>top1</c> and all its sub groups for <c>tc16</c> and the result + will be that this test case executes in group <c>sub121</c>. (The specific path: + <c>-group [sub121]</c> or <c>{group,[[sub121]]}</c>, would have given + us the same result in this example).</p> + <br></br> + <p><c>$ ct_run -suite "x_SUITE" -group sub12 [sub12]</c></p> + <p><c>1> ct:run_test([{suite,"x_SUITE"}, {group,[sub12,[sub12]]}]).</c></p> + <p>This will execute two tests, one that includes all cases and sub groups under + <c>sub12</c>, and one with <em>only</em> the test cases in <c>sub12</c>.</p> + <br></br> + <p><c>$ ct_run -suite "x_SUITE" -group sub2X2</c></p> + <p><c>1> ct:run_test([{suite,"x_SUITE"}, {group,[sub2X2]}]).</c></p> + <p>In this example, Common Test will find and execute two tests, one for the path from + <c>top2</c> to <c>sub2X2</c> via <c>sub21</c>, and one from <c>top2</c> to <c>sub2X2</c> + via <c>sub22</c>.</p> + <br></br> + <p><c>$ ct_run -suite "x_SUITE" -group [sub21,sub2X2]</c></p> + <p><c>1> ct:run_test([{suite,"x_SUITE"}, {group,[[sub21,sub2X2]]}]).</c></p> + <p>Here, by specifying the unique path: <c>top2 -> sub21 -> sub2X2</c>, only one test + is executed. The second possible path from <c>top2</c> to <c>sub2X2</c> (above) + will be discarded.</p> + <br></br> + <p><c>$ ct_run -suite "x_SUITE" -group [sub22] -case tc22 tc21</c></p> + <p><c>1> ct:run_test([{suite,"x_SUITE"}, {group,[[sub22]]}, {testcase,[tc22,tc21]}]).</c></p> + <p>In this example only the test cases for <c>sub22</c> will be executed, and in + reverse order compared to the group definition.</p> + <br></br> + + <p>If a test case that belongs to a group (according to the group definition), is executed + without a group specification, i.e. simply by means of (command line):</p> + <p><c>$ ct_run -suite "my_SUITE" -case my_tc</c></p> + <p>or (Erlang shell):</p> + <p><c>1> ct:run_test([{suite,"my_SUITE"}, {testcase,my_tc}]).</c></p> + <p>then Common Test ignores the group definition and executes the test case in the scope of the + test suite only (no group configuration functions are called).</p> + + <p>The group specification feature, exactly as it has been presented in this section, can also + be used in <seealso marker="run_test_chapter#test_specifications">Test + Specifications</seealso> (with some extra features added). Please see below.</p> + </section> + + <section> <title>Running the interactive shell mode</title> @@ -398,8 +559,8 @@ terms (e.g. log directory, label, style sheet, auto compilation).</p> <p>With test specification terms it is possible to state exactly which tests should run and in which order. A test term specifies - either one or more suites, one or more test case groups, or one - or more test cases in a group or suite.</p> + either one or more suites, one or more test case groups (possibly nested), + or one or more test cases in a group (or in multiple groups) or in a suite.</p> <p>An arbitrary number of test terms may be declared in sequence. Common Test will by default compile the terms into one or more tests to be performed in one resulting test run. Note that a term that @@ -418,28 +579,32 @@ are not executed and show up in the HTML log files as SKIPPED.</p> <p>When a test case group is specified, the resulting test - executes the - <c>init_per_group</c> function, followed by all test cases and - sub groups (including their configuration functions), and + executes the <c>init_per_group</c> function, followed by all test + cases and sub groups (including their configuration functions), and finally the <c>end_per_group</c> function. Also if particular test cases in a group are specified, <c>init_per_group</c> and <c>end_per_group</c> for the group in question are called. If a group which is defined (in <c>Suite:group/0</c>) to - be a sub group of another group, is specified (or particular test + be a sub group of another group, is specified (or if particular test cases of a sub group are), Common Test will call the configuration functions for the top level groups as well as for the sub group in question (making it possible to pass configuration data all the way from <c>init_per_suite</c> down to the test cases in the sub group).</p> - - <p>With the <c>GroupSpec</c> element (below) it's possible to specify - group execution properties that will override those specified in the + <p>The test specification utilizes the same mechanism for specifying + test case groups by means of names and paths, as explained in the + <seealso marker="run_test_chapter#group_execution">Group Execution</seealso> + section above, with the addition of the <c>GroupSpec</c> element + described next.</p> + <p>The <c>GroupSpec</c> element makes it possible to specify + group execution properties that will override those in the group definition (i.e. in <c>groups/0</c>). Execution properties for sub-groups may be overridden as well. This feature makes it possible to change properties of groups at the time of execution, - without even having to edit the test suite. More detailed documentation, - and examples, can be found in the - <seealso marker="write_test_chapter#test_case_groups"> + without even having to edit the test suite. The very same + feature is available for <c>group</c> elements in the <c>Suite:all/0</c> + list. Therefore, more detailed documentation, and examples, can be + found in the <seealso marker="write_test_chapter#test_case_groups"> Test case groups</seealso> chapter.</p> <p>Below is the test specification syntax. Test specifications can @@ -495,6 +660,9 @@ {cover, CoverSpecFile}. {cover, NodeRefs, CoverSpecFile}. + {cover_stop, Bool}. + {cover_stop, NodeRefs, Bool}. + {include, IncludeDirs}. {include, NodeRefs, IncludeDirs}. @@ -541,8 +709,8 @@ {groups, Dir, Suite, Groups}. {groups, NodeRefs, Dir, Suite, Groups}. - {groups, Dir, Suite, GroupSpec, {cases,Cases}}. - {groups, NodeRefs, Dir, Suite, GroupSpec, {cases,Cases}}. + {groups, Dir, Suite, Groups, {cases,Cases}}. + {groups, NodeRefs, Dir, Suite, Groups, {cases,Cases}}. {cases, Dir, Suite, Cases}. {cases, NodeRefs, Dir, Suite, Cases}. @@ -590,7 +758,8 @@ Dir = string() Suites = atom() | [atom()] | all Suite = atom() - Groups = GroupSpec | [GroupSpec] | all + Groups = GroupPath | [GroupPath] | GroupSpec | [GroupSpec] | all + GroupPath = [GroupName] GroupSpec = GroupName | {GroupName,Properties} | {GroupName,Properties,GroupSpec} GroupName = atom() GroupNames = GroupName | [GroupName] diff --git a/lib/common_test/src/Makefile b/lib/common_test/src/Makefile index f7dce195d7..dd2923ece9 100644 --- a/lib/common_test/src/Makefile +++ b/lib/common_test/src/Makefile @@ -73,7 +73,8 @@ MODULES= \ cth_surefire \ ct_netconfc \ ct_conn_log_h \ - cth_conn_log + cth_conn_log \ + ct_groups TARGET_MODULES= $(MODULES:%=$(EBIN)/%) BEAM_FILES= $(MODULES:%=$(EBIN)/%.$(EMULATOR)) diff --git a/lib/common_test/src/ct.erl b/lib/common_test/src/ct.erl index 5014309c0f..8eafdff29f 100644 --- a/lib/common_test/src/ct.erl +++ b/lib/common_test/src/ct.erl @@ -148,7 +148,7 @@ run(TestDirs) -> %%% {config,CfgFiles} | {userconfig, UserConfig} | %%% {allow_user_terms,Bool} | {logdir,LogDir} | %%% {silent_connections,Conns} | {stylesheet,CSSFile} | -%%% {cover,CoverSpecFile} | {step,StepOpts} | +%%% {cover,CoverSpecFile} | {cover_stop,Bool} | {step,StepOpts} | %%% {event_handler,EventHandlers} | {include,InclDirs} | %%% {auto_compile,Bool} | {create_priv_dir,CreatePrivDir} | %%% {multiply_timetraps,M} | {scale_timetraps,Bool} | @@ -161,7 +161,8 @@ run(TestDirs) -> %%% TestDirs = [string()] | string() %%% Suites = [string()] | [atom()] | string() | atom() %%% Cases = [atom()] | atom() -%%% Groups = [atom()] | atom() +%%% Groups = GroupNameOrPath | [GroupNameOrPath] +%%% GroupNameOrPath = [atom()] | atom() | all %%% TestSpecs = [string()] | string() %%% Label = string() | atom() %%% CfgFiles = [string()] | string() @@ -987,8 +988,9 @@ get_testdata(Key) -> end. %%%----------------------------------------------------------------- -%%% @spec abort_current_testcase(Reason) -> ok | {error,no_testcase_running} +%%% @spec abort_current_testcase(Reason) -> ok | {error,ErrorReason} %%% Reason = term() +%%% ErrorReason = no_testcase_running | parallel_group %%% %%% @doc <p>When calling this function, the currently executing test case will be aborted. %%% It is the user's responsibility to know for sure which test case is currently diff --git a/lib/common_test/src/ct_config.erl b/lib/common_test/src/ct_config.erl index 30bf5925c0..b1d709bc75 100644 --- a/lib/common_test/src/ct_config.erl +++ b/lib/common_test/src/ct_config.erl @@ -171,7 +171,7 @@ process_default_configs(Opts) -> lists:flatmap(fun({config,[_|_] = FileOrFiles}) -> case {io_lib:printable_list(FileOrFiles), io_lib:printable_list(hd(FileOrFiles))} of - {true,true} -> + {false,true} -> FileOrFiles; {true,false} -> [FileOrFiles]; @@ -532,7 +532,8 @@ do_require(Name,Key) -> case get_key_from_name(Name) of {error,_} -> allocate(Name,Key); - {ok,Key} -> + {ok,NameKey} when NameKey == Key; + is_tuple(Key) andalso element(1,Key) == NameKey -> %% already allocated - check that it has all required subkeys R = make_ref(), case get_config(Key,R,[]) of diff --git a/lib/common_test/src/ct_conn_log_h.erl b/lib/common_test/src/ct_conn_log_h.erl index bf27238121..d7bd18606b 100644 --- a/lib/common_test/src/ct_conn_log_h.erl +++ b/lib/common_test/src/ct_conn_log_h.erl @@ -64,10 +64,16 @@ do_open_files([],Acc) -> handle_event({_Type, GL, _Msg}, State) when node(GL) /= node() -> {ok, State}; handle_event({_Type,_GL,{Pid,{ct_connection,Action,ConnName},Report}},State) -> + %% NOTE: if the format of this event is changed + %% ({ct_connection,Action,ConnName}) then remember to change + %% test_server_h:report_receiver as well!!! Info = conn_info(Pid,#conn_log{name=ConnName,action=Action}), write_report(now(),Info,Report,State), {ok, State}; handle_event({_Type,_GL,{Pid,Info=#conn_log{},Report}},State) -> + %% NOTE: if the format of this event is changed + %% (Info=#conn_log{}) then remember to change + %% test_server_h:report_receiver as well!!! write_report(now(),conn_info(Pid,Info),Report,State), {ok, State}; handle_event({error_report,_,{Pid,_,[{ct_connection,ConnName}|R]}},State) -> diff --git a/lib/common_test/src/ct_framework.erl b/lib/common_test/src/ct_framework.erl index bec3368869..c1abf27e9f 100644 --- a/lib/common_test/src/ct_framework.erl +++ b/lib/common_test/src/ct_framework.erl @@ -32,8 +32,6 @@ -export([error_in_suite/1, init_per_suite/1, end_per_suite/1, init_per_group/2, end_per_group/2]). --export([make_all_conf/3, make_conf/5]). - -include("ct_event.hrl"). -include("ct_util.hrl"). @@ -876,13 +874,13 @@ get_suite(Mod, all) -> {'EXIT',_} -> get_all(Mod, []); GroupDefs when is_list(GroupDefs) -> - case catch find_groups(Mod, all, all, GroupDefs) of + case catch ct_groups:find_groups(Mod, all, all, GroupDefs) of {error,_} = Error -> %% this makes test_server call error_in_suite as first %% (and only) test case so we can report Error properly [{?MODULE,error_in_suite,[[Error]]}]; ConfTests -> - get_all(Mod, ConfTests) + get_all(Mod, ConfTests) end; _ -> E = "Bad return value from "++atom_to_list(Mod)++":groups/0", @@ -901,7 +899,7 @@ get_suite(Mod, Group={conf,Props,_Init,TCs,_End}) -> {'EXIT',_} -> [Group]; GroupDefs when is_list(GroupDefs) -> - case catch find_groups(Mod, Name, TCs, GroupDefs) of + case catch ct_groups:find_groups(Mod, Name, TCs, GroupDefs) of {error,_} = Error -> %% this makes test_server call error_in_suite as first %% (and only) test case so we can report Error properly @@ -916,12 +914,13 @@ get_suite(Mod, Group={conf,Props,_Init,TCs,_End}) -> %% init/end functions for top groups will be executed case catch ?val(name, element(2, hd(ConfTests))) of Name -> % top group - delete_subs(ConfTests, ConfTests); + ct_groups:delete_subs(ConfTests, ConfTests); _ -> [] end; false -> - ConfTests1 = delete_subs(ConfTests, ConfTests), + ConfTests1 = ct_groups:delete_subs(ConfTests, + ConfTests), case ?val(override, Props) of undefined -> ConfTests1; @@ -930,9 +929,9 @@ get_suite(Mod, Group={conf,Props,_Init,TCs,_End}) -> ORSpec -> ORSpec1 = if is_tuple(ORSpec) -> [ORSpec]; true -> ORSpec end, - search_and_override(ConfTests1, - ORSpec1, Mod) - end + ct_groups:search_and_override(ConfTests1, + ORSpec1, Mod) + end end end; _ -> @@ -976,234 +975,6 @@ get_all_cases1(_, []) -> %%%----------------------------------------------------------------- -find_groups(Mod, Name, TCs, GroupDefs) -> - Found = find(Mod, Name, TCs, GroupDefs, [], GroupDefs, false), - trim(Found). - -find(Mod, all, _TCs, [{Name,Props,Tests} | Gs], Known, Defs, _) - when is_atom(Name), is_list(Props), is_list(Tests) -> - cyclic_test(Mod, Name, Known), - [make_conf(Mod, Name, Props, - find(Mod, all, all, Tests, [Name | Known], Defs, true)) | - find(Mod, all, all, Gs, [], Defs, true)]; - -find(Mod, Name, TCs, [{Name,Props,Tests} | _Gs], Known, Defs, false) - when is_atom(Name), is_list(Props), is_list(Tests) -> - cyclic_test(Mod, Name, Known), - case TCs of - all -> - [make_conf(Mod, Name, Props, - find(Mod, Name, TCs, Tests, [Name | Known], Defs, true))]; - _ -> - Tests1 = [TC || TC <- TCs, - lists:member(TC, Tests) == true], - [make_conf(Mod, Name, Props, Tests1)] - end; - -find(Mod, Name, TCs, [{Name1,Props,Tests} | Gs], Known, Defs, false) - when is_atom(Name1), is_list(Props), is_list(Tests) -> - cyclic_test(Mod, Name1, Known), - [make_conf(Mod,Name1,Props, - find(Mod, Name, TCs, Tests, [Name1 | Known], Defs, false)) | - find(Mod, Name, TCs, Gs, [], Defs, false)]; - -find(Mod, Name, _TCs, [{Name,_Props,_Tests} | _Gs], _Known, _Defs, true) - when is_atom(Name) -> - E = "Duplicate groups named "++atom_to_list(Name)++" in "++ - atom_to_list(Mod)++":groups/0", - throw({error,list_to_atom(E)}); - -find(Mod, Name, all, [{Name1,Props,Tests} | Gs], Known, Defs, true) - when is_atom(Name1), is_list(Props), is_list(Tests) -> - cyclic_test(Mod, Name1, Known), - [make_conf(Mod, Name1, Props, - find(Mod, Name, all, Tests, [Name1 | Known], Defs, true)) | - find(Mod, Name, all, Gs, [], Defs, true)]; - -find(Mod, Name, TCs, [{group,Name1} | Gs], Known, Defs, Found) - when is_atom(Name1) -> - find(Mod, Name, TCs, [expand(Mod, Name1, Defs) | Gs], Known, Defs, Found); - -%% Undocumented remote group feature, use with caution -find(Mod, Name, TCs, [{group, ExtMod, ExtGrp} | Gs], Known, Defs, true) - when is_atom(ExtMod), is_atom(ExtGrp) -> - ExternalDefs = ExtMod:groups(), - ExternalTCs = find(ExtMod, ExtGrp, TCs, [{group, ExtGrp}], - [], ExternalDefs, false), - ExternalTCs ++ find(Mod, Name, TCs, Gs, Known, Defs, true); - -find(Mod, Name, TCs, [{Name1,Tests} | Gs], Known, Defs, Found) - when is_atom(Name1), is_list(Tests) -> - find(Mod, Name, TCs, [{Name1,[],Tests} | Gs], Known, Defs, Found); - -find(Mod, Name, TCs, [_TC | Gs], Known, Defs, false) -> - find(Mod, Name, TCs, Gs, Known, Defs, false); - -find(Mod, Name, TCs, [TC | Gs], Known, Defs, true) when is_atom(TC) -> - [{Mod, TC} | find(Mod, Name, TCs, Gs, Known, Defs, true)]; - -find(Mod, Name, TCs, [{ExternalTC, Case} = TC | Gs], Known, Defs, true) - when is_atom(ExternalTC), - is_atom(Case) -> - [TC | find(Mod, Name, TCs, Gs, Known, Defs, true)]; - -find(Mod, _Name, _TCs, [BadTerm | _Gs], Known, _Defs, _Found) -> - Where = if length(Known) == 0 -> - atom_to_list(Mod)++":groups/0"; - true -> - "group "++atom_to_list(lists:last(Known))++ - " in "++atom_to_list(Mod)++":groups/0" - end, - Term = io_lib:format("~p", [BadTerm]), - E = "Bad term "++lists:flatten(Term)++" in "++Where, - throw({error,list_to_atom(E)}); - -find(_Mod, _Name, _TCs, [], _Known, _Defs, false) -> - ['$NOMATCH']; - -find(_Mod, _Name, _TCs, [], _Known, _Defs, _Found) -> - []. - -delete_subs([{conf, _,_,_,_} = Conf | Confs], All) -> - All1 = delete_conf(Conf, All), - case is_sub(Conf, All1) of - true -> - delete_subs(Confs, All1); - false -> - delete_subs(Confs, All) - end; -delete_subs([_Else | Confs], All) -> - delete_subs(Confs, All); -delete_subs([], All) -> - All. - -delete_conf({conf,Props,_,_,_}, Confs) -> - Name = ?val(name, Props), - [Conf || Conf = {conf,Props0,_,_,_} <- Confs, - Name =/= ?val(name, Props0)]. - -is_sub({conf,Props,_,_,_}=Conf, [{conf,_,_,Tests,_} | Confs]) -> - Name = ?val(name, Props), - case lists:any(fun({conf,Props0,_,_,_}) -> - case ?val(name, Props0) of - N when N == Name -> - true; - _ -> - false - end; - (_) -> - false - end, Tests) of - true -> - true; - false -> - is_sub(Conf, Tests) or is_sub(Conf, Confs) - end; - -is_sub(Conf, [_TC | Tests]) -> - is_sub(Conf, Tests); - -is_sub(_Conf, []) -> - false. - -trim(['$NOMATCH' | Tests]) -> - trim(Tests); - -trim([{conf,Props,Init,Tests,End} | Confs]) -> - case trim(Tests) of - [] -> - trim(Confs); - Trimmed -> - [{conf,Props,Init,Trimmed,End} | trim(Confs)] - end; - -trim([TC | Tests]) -> - [TC | trim(Tests)]; - -trim([]) -> - []. - -cyclic_test(Mod, Name, Names) -> - case lists:member(Name, Names) of - true -> - E = "Cyclic reference to group "++atom_to_list(Name)++ - " in "++atom_to_list(Mod)++":groups/0", - throw({error,list_to_atom(E)}); - false -> - ok - end. - -expand(Mod, Name, Defs) -> - case lists:keysearch(Name, 1, Defs) of - {value,Def} -> - Def; - false -> - E = "Invalid group "++atom_to_list(Name)++ - " in "++atom_to_list(Mod)++":groups/0", - throw({error,list_to_atom(E)}) - end. - -make_all_conf(Dir, Mod, _Props) -> - case code:is_loaded(Mod) of - false -> - code:load_abs(filename:join(Dir,atom_to_list(Mod))); - _ -> - ok - end, - make_all_conf(Mod). - -make_all_conf(Mod) -> - case catch apply(Mod, groups, []) of - {'EXIT',_} -> - {error,{invalid_group_definition,Mod}}; - GroupDefs when is_list(GroupDefs) -> - case catch find_groups(Mod, all, all, GroupDefs) of - {error,_} = Error -> - %% this makes test_server call error_in_suite as first - %% (and only) test case so we can report Error properly - [{?MODULE,error_in_suite,[[Error]]}]; - [] -> - {error,{invalid_group_spec,Mod}}; - ConfTests -> - [{conf,Props,Init,all,End} || - {conf,Props,Init,_,End} - <- delete_subs(ConfTests, ConfTests)] - end - end. - -make_conf(Dir, Mod, Name, Props, TestSpec) -> - case code:is_loaded(Mod) of - false -> - code:load_abs(filename:join(Dir,atom_to_list(Mod))); - _ -> - ok - end, - make_conf(Mod, Name, Props, TestSpec). - -make_conf(Mod, Name, Props, TestSpec) -> - case code:is_loaded(Mod) of - false -> - code:load_file(Mod); - _ -> - ok - end, - {InitConf,EndConf,ExtraProps} = - case erlang:function_exported(Mod,init_per_group,2) of - true -> - {{Mod,init_per_group},{Mod,end_per_group},[]}; - false -> - ct_logs:log("TEST INFO", "init_per_group/2 and " - "end_per_group/2 missing for group " - "~p in ~p, using default.", - [Name,Mod]), - {{?MODULE,init_per_group}, - {?MODULE,end_per_group}, - [{suite,Mod}]} - end, - {conf,[{name,Name}|Props++ExtraProps],InitConf,TestSpec,EndConf}. - -%%%----------------------------------------------------------------- - get_all(Mod, ConfTests) -> case catch apply(Mod, all, []) of {'EXIT',_} -> @@ -1218,133 +989,24 @@ get_all(Mod, ConfTests) -> [{?MODULE,error_in_suite,[[{error,What}]]}]; SeqsAndTCs -> %% expand group references in all() using ConfTests - case catch expand_groups(SeqsAndTCs, ConfTests, Mod) of + case catch ct_groups:expand_groups(SeqsAndTCs, + ConfTests, + Mod) of {error,_} = Error -> [{?MODULE,error_in_suite,[[Error]]}]; Tests -> - delete_subs(Tests, Tests) + ct_groups:delete_subs(Tests, Tests) end end; Skip = {skip,_Reason} -> Skip; _ -> Reason = - list_to_atom("Bad return value from "++atom_to_list(Mod)++":all/0"), + list_to_atom("Bad return value from "++ + atom_to_list(Mod)++":all/0"), [{?MODULE,error_in_suite,[[{error,Reason}]]}] end. -expand_groups([H | T], ConfTests, Mod) -> - [expand_groups(H, ConfTests, Mod) | expand_groups(T, ConfTests, Mod)]; -expand_groups([], _ConfTests, _Mod) -> - []; -expand_groups({group,Name}, ConfTests, Mod) -> - expand_groups({group,Name,default,[]}, ConfTests, Mod); -expand_groups({group,Name,default}, ConfTests, Mod) -> - expand_groups({group,Name,default,[]}, ConfTests, Mod); -expand_groups({group,Name,ORProps}, ConfTests, Mod) when is_list(ORProps) -> - expand_groups({group,Name,ORProps,[]}, ConfTests, Mod); -expand_groups({group,Name,ORProps,SubORSpec}, ConfTests, Mod) -> - FindConf = - fun(Conf = {conf,Props,Init,Ts,End}) -> - case ?val(name, Props) of - Name when ORProps == default -> - [Conf]; - Name -> - [{conf,[{name,Name}|ORProps],Init,Ts,End}]; - _ -> - [] - end - end, - case lists:flatmap(FindConf, ConfTests) of - [] -> - throw({error,invalid_ref_msg(Name, Mod)}); - Matching when SubORSpec == [] -> - Matching; - Matching -> - override_props(Matching, SubORSpec, Name,Mod) - end; -expand_groups(SeqOrTC, _ConfTests, _Mod) -> - SeqOrTC. - -%% search deep for the matching conf test and modify it and any -%% sub tests according to the override specification -search_and_override([Conf = {conf,Props,Init,Tests,End}], ORSpec, Mod) -> - Name = ?val(name, Props), - case lists:keysearch(Name, 1, ORSpec) of - {value,{Name,default}} -> - [Conf]; - {value,{Name,ORProps}} -> - [{conf,[{name,Name}|ORProps],Init,Tests,End}]; - {value,{Name,default,[]}} -> - [Conf]; - {value,{Name,default,SubORSpec}} -> - override_props([Conf], SubORSpec, Name,Mod); - {value,{Name,ORProps,SubORSpec}} -> - override_props([{conf,[{name,Name}|ORProps], - Init,Tests,End}], SubORSpec, Name,Mod); - _ -> - [{conf,Props,Init,search_and_override(Tests,ORSpec,Mod),End}] - end. - -%% Modify the Tests element according to the override specification -override_props([{conf,Props,Init,Tests,End} | Confs], SubORSpec, Name,Mod) -> - {Subs,SubORSpec1} = override_sub_props(Tests, [], SubORSpec, Mod), - [{conf,Props,Init,Subs,End} | override_props(Confs, SubORSpec1, Name,Mod)]; -override_props([], [], _,_) -> - []; -override_props([], SubORSpec, Name,Mod) -> - Es = [invalid_ref_msg(Name, element(1,Spec), Mod) || Spec <- SubORSpec], - throw({error,Es}). - -override_sub_props([], New, ORSpec, _) -> - {?rev(New),ORSpec}; -override_sub_props([T = {conf,Props,Init,Tests,End} | Ts], - New, ORSpec, Mod) -> - Name = ?val(name, Props), - case lists:keysearch(Name, 1, ORSpec) of - {value,Spec} -> % group found in spec - Props1 = - case element(2, Spec) of - default -> Props; - ORProps -> [{name,Name} | ORProps] - end, - case catch element(3, Spec) of - Undef when Undef == [] ; 'EXIT' == element(1, Undef) -> - override_sub_props(Ts, [{conf,Props1,Init,Tests,End} | New], - lists:keydelete(Name, 1, ORSpec), Mod); - SubORSpec when is_list(SubORSpec) -> - case override_sub_props(Tests, [], SubORSpec, Mod) of - {Subs,[]} -> - override_sub_props(Ts, [{conf,Props1,Init, - Subs,End} | New], - lists:keydelete(Name, 1, ORSpec), - Mod); - {_,NonEmptySpec} -> - Es = [invalid_ref_msg(Name, element(1, GrRef), - Mod) || GrRef <- NonEmptySpec], - throw({error,Es}) - end; - BadGrSpec -> - throw({error,{invalid_form,BadGrSpec}}) - end; - _ -> % not a group in spec - override_sub_props(Ts, [T | New], ORSpec, Mod) - end; -override_sub_props([TC | Ts], New, ORSpec, Mod) -> - override_sub_props(Ts, [TC | New], ORSpec, Mod). - -invalid_ref_msg(Name, Mod) -> - E = "Invalid reference to group "++ - atom_to_list(Name)++" in "++ - atom_to_list(Mod)++":all/0", - list_to_atom(E). - -invalid_ref_msg(Name0, Name1, Mod) -> - E = "Invalid reference to group "++ - atom_to_list(Name1)++" from "++atom_to_list(Name0)++ - " in "++atom_to_list(Mod)++":all/0", - list_to_atom(E). - %%!============================================================ %%! The support for sequences by means of using sequences/0 %%! will be removed in OTP R15. The code below is only kept diff --git a/lib/common_test/src/ct_groups.erl b/lib/common_test/src/ct_groups.erl new file mode 100644 index 0000000000..74ab5e5439 --- /dev/null +++ b/lib/common_test/src/ct_groups.erl @@ -0,0 +1,599 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2004-2012. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% +%% + +%%% @doc Common Test Framework callback module. +%%% +%%% <p>This module contains CT internal help functions for searching +%%% through groups specification trees and producing resulting +%%% tests.</p> + +-module(ct_groups). + +-export([find_groups/4]). +-export([make_all_conf/3, make_all_conf/4, make_conf/5]). +-export([delete_subs/2]). +-export([expand_groups/3, search_and_override/3]). + +-define(val(Key, List), proplists:get_value(Key, List)). +-define(val(Key, List, Def), proplists:get_value(Key, List, Def)). +-define(rev(L), lists:reverse(L)). + +find_groups(Mod, GrNames, TCs, GroupDefs) when is_atom(GrNames) ; + (length(GrNames) == 1) -> + find_groups1(Mod, GrNames, TCs, GroupDefs); + +find_groups(Mod, Groups, TCs, GroupDefs) when Groups /= [] -> + lists:append([find_groups1(Mod, [GrNames], TCs, GroupDefs) || + GrNames <- Groups]); + +find_groups(_Mod, [], _TCs, _GroupDefs) -> + []. + +%% GrNames == atom(): Single group name, perform full search +%% GrNames == list(): List of groups, find all matching paths +%% GrNames == [list()]: Search path terminated by last group in GrNames +find_groups1(Mod, GrNames, TCs, GroupDefs) -> + {GrNames1,FindAll} = + case GrNames of + Name when is_atom(Name), Name /= all -> + {[Name],true}; + [Path] when is_list(Path) -> + {Path,false}; + Path -> + {Path,true} + end, + TCs1 = if (is_atom(TCs) and (TCs /= all)) or is_tuple(TCs) -> + [TCs]; + true -> + TCs + end, + Found = find(Mod, GrNames1, TCs1, GroupDefs, [], + GroupDefs, FindAll), + [Conf || Conf <- Found, Conf /= 'NOMATCH']. + +%% Locate all groups +find(Mod, all, all, [{Name,Props,Tests} | Gs], Known, Defs, _) + when is_atom(Name), is_list(Props), is_list(Tests) -> + cyclic_test(Mod, Name, Known), + trim(make_conf(Mod, Name, Props, + find(Mod, all, all, Tests, [Name | Known], + Defs, true))) ++ + find(Mod, all, all, Gs, Known, Defs, true); + +%% Locate particular TCs in all groups +find(Mod, all, TCs, [{Name,Props,Tests} | Gs], Known, Defs, _) + when is_atom(Name), is_list(Props), is_list(Tests) -> + cyclic_test(Mod, Name, Known), + Tests1 = rm_unwanted_tcs(Tests, TCs, []), + trim(make_conf(Mod, Name, Props, + find(Mod, all, TCs, Tests1, [Name | Known], + Defs, true))) ++ + find(Mod, all, TCs, Gs, Known, Defs, true); + +%% Found next group is in search path +find(Mod, [Name|GrNames]=SPath, TCs, [{Name,Props,Tests} | Gs], Known, + Defs, FindAll) when is_atom(Name), is_list(Props), is_list(Tests) -> + cyclic_test(Mod, Name, Known), + Tests1 = rm_unwanted_tcs(Tests, TCs, GrNames), + trim(make_conf(Mod, Name, Props, + find(Mod, GrNames, TCs, Tests1, [Name|Known], + Defs, FindAll))) ++ + find(Mod, SPath, TCs, Gs, Known, Defs, FindAll); + +%% Group path terminated, stop the search +find(Mod, [], TCs, Tests, _Known, _Defs, false) -> + Cases = lists:flatmap(fun(TC) when is_atom(TC), TCs == all -> + [{Mod,TC}]; + ({group,_}) -> + []; + ({_,_}=TC) when TCs == all -> + [TC]; + (TC) -> + if is_atom(TC) -> + Tuple = {Mod,TC}, + case lists:member(Tuple, TCs) of + true -> + [Tuple]; + false -> + case lists:member(TC, TCs) of + true -> [{Mod,TC}]; + false -> [] + end + end; + true -> + [] + end + end, Tests), + if Cases == [] -> ['NOMATCH']; + true -> Cases + end; + +%% No more groups +find(_Mod, [_|_], _TCs, [], _Known, _Defs, _) -> + ['NOMATCH']; + +%% Found group not next in search path +find(Mod, GrNames, TCs, [{Name,Props,Tests} | Gs], Known, + Defs, FindAll) when is_atom(Name), is_list(Props), is_list(Tests) -> + cyclic_test(Mod, Name, Known), + Tests1 = rm_unwanted_tcs(Tests, TCs, GrNames), + trim(make_conf(Mod, Name, Props, + find(Mod, GrNames, TCs, Tests1, [Name|Known], + Defs, FindAll))) ++ + find(Mod, GrNames, TCs, Gs, Known, Defs, FindAll); + +%% A nested group defined on top level found +find(Mod, GrNames, TCs, [{group,Name1} | Gs], Known, Defs, FindAll) + when is_atom(Name1) -> + find(Mod, GrNames, TCs, [expand(Mod, Name1, Defs) | Gs], Known, + Defs, FindAll); + +%% Undocumented remote group feature, use with caution +find(Mod, GrNames, TCs, [{group, ExtMod, ExtGrp} | Gs], Known, + Defs, FindAll) when is_atom(ExtMod), is_atom(ExtGrp) -> + ExternalDefs = ExtMod:groups(), + ExternalTCs = find(ExtMod, ExtGrp, TCs, [{group, ExtGrp}], + [], ExternalDefs, FindAll), + ExternalTCs ++ find(Mod, GrNames, TCs, Gs, Known, Defs, FindAll); + +%% Group definition without properties, add an empty property list +find(Mod, GrNames, TCs, [{Name1,Tests} | Gs], Known, Defs, FindAll) + when is_atom(Name1), is_list(Tests) -> + find(Mod, GrNames, TCs, [{Name1,[],Tests} | Gs], Known, Defs, FindAll); + +%% Save, and keep searching +find(Mod, GrNames, TCs, [{ExternalTC, Case} = TC | Gs], Known, + Defs, FindAll) when is_atom(ExternalTC), + is_atom(Case) -> + [TC | find(Mod, GrNames, TCs, Gs, Known, Defs, FindAll)]; + +%% Save test case +find(Mod, GrNames, all, [TC | Gs], Known, + Defs, FindAll) when is_atom(TC) -> + [{Mod,TC} | find(Mod, GrNames, all, Gs, Known, Defs, FindAll)]; + +%% Save test case +find(Mod, GrNames, all, [{M,TC} | Gs], Known, + Defs, FindAll) when is_atom(M), M /= group, is_atom(TC) -> + [{M,TC} | find(Mod, GrNames, all, Gs, Known, Defs, FindAll)]; + +%% Check if test case should be saved +find(Mod, GrNames, TCs, [TC | Gs], Known, + Defs, FindAll) when is_atom(TC) orelse + ((size(TC) == 2) and (element(1,TC) /= group)) -> + Case = + if is_atom(TC) -> + Tuple = {Mod,TC}, + case lists:member(Tuple, TCs) of + true -> + Tuple; + false -> + case lists:member(TC, TCs) of + true -> {Mod,TC}; + false -> [] + end + end; + true -> + case lists:member(TC, TCs) of + true -> {Mod,TC}; + false -> [] + end + end, + if Case == [] -> + find(Mod, GrNames, TCs, Gs, Known, Defs, FindAll); + true -> + [Case | find(Mod, GrNames, TCs, Gs, Known, Defs, FindAll)] + end; + +%% Unexpeted term in group list +find(Mod, _GrNames, _TCs, [BadTerm | _Gs], Known, _Defs, _FindAll) -> + Where = if length(Known) == 0 -> + atom_to_list(Mod)++":groups/0"; + true -> + "group "++atom_to_list(lists:last(Known))++ + " in "++atom_to_list(Mod)++":groups/0" + end, + Term = io_lib:format("~p", [BadTerm]), + E = "Bad term "++lists:flatten(Term)++" in "++Where, + throw({error,list_to_atom(E)}); + +%% No more groups +find(_Mod, _GrNames, _TCs, [], _Known, _Defs, _) -> + []. + +%%%----------------------------------------------------------------- + +%% We have to always search bottom up to only remove a branch +%% if there's 'NOMATCH' in the leaf (otherwise, the branch should +%% be kept) + +trim({conf,Props,Init,Tests,End}) -> + try trim(Tests) of + [] -> []; + Tests1 -> [{conf,Props,Init,Tests1,End}] + catch + throw:_ -> [] + end; + +trim(Tests) when is_list(Tests) -> + %% we need to compare the result of trimming each test on this + %% level, and only let a 'NOMATCH' fail the level if no + %% successful sub group can be found + Tests1 = + lists:flatmap(fun(Test) -> + IsConf = case Test of + {conf,_,_,_,_} -> + true; + _ -> + false + end, + try trim_test(Test) of + [] -> []; + Test1 when IsConf -> [{conf,Test1}]; + Test1 -> [Test1] + catch + throw:_ -> ['NOMATCH'] + end + end, Tests), + case lists:keymember(conf, 1, Tests1) of + true -> % at least one successful group + lists:flatmap(fun({conf,Test}) -> [Test]; + ('NOMATCH') -> []; % ignore any 'NOMATCH' + (Test) -> [Test] + end, Tests1); + false -> + case lists:member('NOMATCH', Tests1) of + true -> + throw('NOMATCH'); + false -> + Tests1 + end + end. + +trim_test({conf,Props,Init,Tests,End}) -> + case trim(Tests) of + [] -> + []; + Tests1 -> + {conf,Props,Init,Tests1,End} + end; + +trim_test('NOMATCH') -> + throw('NOMATCH'); + +trim_test(Test) -> + Test. + +%% GrNames is [] if the terminating group has been found. From +%% that point, all specified test should be included (as well as +%% sub groups for deeper search). +rm_unwanted_tcs(Tests, all, []) -> + Tests; + +rm_unwanted_tcs(Tests, TCs, []) -> + sort_tests(lists:flatmap(fun(Test) when is_tuple(Test), + (size(Test) > 2) -> + [Test]; + (Test={group,_}) -> + [Test]; + (Test={_M,TC}) -> + case lists:member(TC, TCs) of + true -> [Test]; + false -> [] + end; + (Test) when is_atom(Test) -> + case lists:keysearch(Test, 2, TCs) of + {value,_} -> + [Test]; + _ -> + case lists:member(Test, TCs) of + true -> [Test]; + false -> [] + end + end; + (Test) -> [Test] + end, Tests), TCs); + +rm_unwanted_tcs(Tests, _TCs, _) -> + [Test || Test <- Tests, not is_atom(Test)]. + +%% make sure the order of tests is according to the order in TCs +sort_tests(Tests, TCs) when is_list(TCs)-> + lists:sort(fun(T1, T2) -> + case {is_tc(T1),is_tc(T2)} of + {true,true} -> + (position(T1, TCs) =< + position(T2, TCs)); + {false,true} -> + (position(T2, TCs) == (length(TCs)+1)); + _ -> true + + end + end, Tests); +sort_tests(Tests, _) -> + Tests. + +is_tc(T) when is_atom(T) -> true; +is_tc({group,_}) -> false; +is_tc({_M,T}) when is_atom(T) -> true; +is_tc(_) -> false. + +position(T, TCs) -> + position(T, TCs, 1). + +position(T, [T|_TCs], Pos) -> + Pos; +position(T, [{_,T}|_TCs], Pos) -> + Pos; +position({M,T}, [T|_TCs], Pos) when M /= group -> + Pos; +position(T, [_|TCs], Pos) -> + position(T, TCs, Pos+1); +position(_, [], Pos) -> + Pos. + +%%%----------------------------------------------------------------- + +delete_subs([{conf, _,_,_,_} = Conf | Confs], All) -> + All1 = delete_conf(Conf, All), + case is_sub(Conf, All1) of + true -> + delete_subs(Confs, All1); + false -> + delete_subs(Confs, All) + end; +delete_subs([_Else | Confs], All) -> + delete_subs(Confs, All); +delete_subs([], All) -> + All. + +delete_conf({conf,Props,_,_,_}, Confs) -> + Name = ?val(name, Props), + [Conf || Conf = {conf,Props0,_,_,_} <- Confs, + Name =/= ?val(name, Props0)]. + +is_sub({conf,Props,_,_,_}=Conf, [{conf,_,_,Tests,_} | Confs]) -> + Name = ?val(name, Props), + case lists:any(fun({conf,Props0,_,_,_}) -> + case ?val(name, Props0) of + N when N == Name -> + true; + _ -> + false + end; + (_) -> + false + end, Tests) of + true -> + true; + false -> + is_sub(Conf, Tests) orelse is_sub(Conf, Confs) + end; + +is_sub(Conf, [_TC | Tests]) -> + is_sub(Conf, Tests); + +is_sub(_Conf, []) -> + false. + + +cyclic_test(Mod, Name, Names) -> + case lists:member(Name, Names) of + true -> + E = "Cyclic reference to group "++atom_to_list(Name)++ + " in "++atom_to_list(Mod)++":groups/0", + throw({error,list_to_atom(E)}); + false -> + ok + end. + +expand(Mod, Name, Defs) -> + case lists:keysearch(Name, 1, Defs) of + {value,Def} -> + Def; + false -> + E = "Invalid group "++atom_to_list(Name)++ + " in "++atom_to_list(Mod)++":groups/0", + throw({error,list_to_atom(E)}) + end. + +make_all_conf(Dir, Mod, Props, TestSpec) -> + case code:is_loaded(Mod) of + false -> + code:load_abs(filename:join(Dir,atom_to_list(Mod))); + _ -> + ok + end, + make_all_conf(Mod, Props, TestSpec). + +make_all_conf(Mod, Props, TestSpec) -> + case catch apply(Mod, groups, []) of + {'EXIT',_} -> + exit({invalid_group_definition,Mod}); + GroupDefs when is_list(GroupDefs) -> + case catch find_groups(Mod, all, TestSpec, GroupDefs) of + {error,_} = Error -> + %% this makes test_server call error_in_suite as first + %% (and only) test case so we can report Error properly + [{ct_framework,error_in_suite,[[Error]]}]; + [] -> + exit({invalid_group_spec,Mod}); + _ConfTests -> + make_conf(Mod, all, Props, TestSpec) + end + end. + +make_conf(Dir, Mod, Name, Props, TestSpec) -> + case code:is_loaded(Mod) of + false -> + code:load_abs(filename:join(Dir,atom_to_list(Mod))); + _ -> + ok + end, + make_conf(Mod, Name, Props, TestSpec). + +make_conf(Mod, Name, Props, TestSpec) -> + case code:is_loaded(Mod) of + false -> + code:load_file(Mod); + _ -> + ok + end, + {InitConf,EndConf,ExtraProps} = + case erlang:function_exported(Mod,init_per_group,2) of + true -> + {{Mod,init_per_group},{Mod,end_per_group},[]}; + false -> + ct_logs:log("TEST INFO", "init_per_group/2 and " + "end_per_group/2 missing for group " + "~p in ~p, using default.", + [Name,Mod]), + {{ct_framework,init_per_group}, + {ct_framework,end_per_group}, + [{suite,Mod}]} + end, + {conf,[{name,Name}|Props++ExtraProps],InitConf,TestSpec,EndConf}. + +%%%----------------------------------------------------------------- + +expand_groups([H | T], ConfTests, Mod) -> + [expand_groups(H, ConfTests, Mod) | expand_groups(T, ConfTests, Mod)]; +expand_groups([], _ConfTests, _Mod) -> + []; +expand_groups({group,Name}, ConfTests, Mod) -> + expand_groups({group,Name,default,[]}, ConfTests, Mod); +expand_groups({group,Name,default}, ConfTests, Mod) -> + expand_groups({group,Name,default,[]}, ConfTests, Mod); +expand_groups({group,Name,ORProps}, ConfTests, Mod) when is_list(ORProps) -> + expand_groups({group,Name,ORProps,[]}, ConfTests, Mod); +expand_groups({group,Name,ORProps,SubORSpec}, ConfTests, Mod) -> + FindConf = + fun(Conf = {conf,Props,Init,Ts,End}) -> + case ?val(name, Props) of + Name when ORProps == default -> + [Conf]; + Name -> + Props1 = case ?val(suite, Props) of + undefined -> + ORProps; + SuiteName -> + [{suite,SuiteName}|ORProps] + end, + [{conf,[{name,Name}|Props1],Init,Ts,End}]; + _ -> + [] + end + end, + case lists:flatmap(FindConf, ConfTests) of + [] -> + throw({error,invalid_ref_msg(Name, Mod)}); + Matching when SubORSpec == [] -> + Matching; + Matching -> + override_props(Matching, SubORSpec, Name,Mod) + end; +expand_groups(SeqOrTC, _ConfTests, _Mod) -> + SeqOrTC. + +%% search deep for the matching conf test and modify it and any +%% sub tests according to the override specification +search_and_override([Conf = {conf,Props,Init,Tests,End}], ORSpec, Mod) -> + InsProps = fun(GrName, undefined, Ps) -> + [{name,GrName} | Ps]; + (GrName, Suite, Ps) -> + [{name,GrName}, {suite,Suite} | Ps] + end, + Name = ?val(name, Props), + Suite = ?val(suite, Props), + case lists:keysearch(Name, 1, ORSpec) of + {value,{Name,default}} -> + [Conf]; + {value,{Name,ORProps}} -> + [{conf,InsProps(Name,Suite,ORProps),Init,Tests,End}]; + {value,{Name,default,[]}} -> + [Conf]; + {value,{Name,default,SubORSpec}} -> + override_props([Conf], SubORSpec, Name,Mod); + {value,{Name,ORProps,SubORSpec}} -> + override_props([{conf,InsProps(Name,Suite,ORProps), + Init,Tests,End}], SubORSpec, Name,Mod); + _ -> + [{conf,Props,Init,search_and_override(Tests,ORSpec,Mod),End}] + end. + +%% Modify the Tests element according to the override specification +override_props([{conf,Props,Init,Tests,End} | Confs], SubORSpec, Name,Mod) -> + {Subs,SubORSpec1} = override_sub_props(Tests, [], SubORSpec, Mod), + [{conf,Props,Init,Subs,End} | override_props(Confs, SubORSpec1, Name,Mod)]; +override_props([], [], _,_) -> + []; +override_props([], SubORSpec, Name,Mod) -> + Es = [invalid_ref_msg(Name, element(1,Spec), Mod) || Spec <- SubORSpec], + throw({error,Es}). + +override_sub_props([], New, ORSpec, _) -> + {?rev(New),ORSpec}; +override_sub_props([T = {conf,Props,Init,Tests,End} | Ts], + New, ORSpec, Mod) -> + Name = ?val(name, Props), + Suite = ?val(suite, Props), + case lists:keysearch(Name, 1, ORSpec) of + {value,Spec} -> % group found in spec + Props1 = + case element(2, Spec) of + default -> Props; + ORProps when Suite == undefined -> [{name,Name} | ORProps]; + ORProps -> [{name,Name}, {suite,Suite} | ORProps] + end, + case catch element(3, Spec) of + Undef when Undef == [] ; 'EXIT' == element(1, Undef) -> + override_sub_props(Ts, [{conf,Props1,Init,Tests,End} | New], + lists:keydelete(Name, 1, ORSpec), Mod); + SubORSpec when is_list(SubORSpec) -> + case override_sub_props(Tests, [], SubORSpec, Mod) of + {Subs,[]} -> + override_sub_props(Ts, [{conf,Props1,Init, + Subs,End} | New], + lists:keydelete(Name, 1, ORSpec), + Mod); + {_,NonEmptySpec} -> + Es = [invalid_ref_msg(Name, element(1, GrRef), + Mod) || GrRef <- NonEmptySpec], + throw({error,Es}) + end; + BadGrSpec -> + throw({error,{invalid_form,BadGrSpec}}) + end; + _ -> % not a group in spec + override_sub_props(Ts, [T | New], ORSpec, Mod) + end; +override_sub_props([TC | Ts], New, ORSpec, Mod) -> + override_sub_props(Ts, [TC | New], ORSpec, Mod). + +invalid_ref_msg(Name, Mod) -> + E = "Invalid reference to group "++ + atom_to_list(Name)++" in "++ + atom_to_list(Mod)++":all/0", + list_to_atom(E). + +invalid_ref_msg(Name0, Name1, Mod) -> + E = "Invalid reference to group "++ + atom_to_list(Name1)++" from "++atom_to_list(Name0)++ + " in "++atom_to_list(Mod)++":all/0", + list_to_atom(E). diff --git a/lib/common_test/src/ct_master.erl b/lib/common_test/src/ct_master.erl index 99bec3ea09..f29eba605c 100644 --- a/lib/common_test/src/ct_master.erl +++ b/lib/common_test/src/ct_master.erl @@ -51,7 +51,7 @@ %%% {testcase,Cases} | {spec,TestSpecs} | {allow_user_terms,Bool} | %%% {logdir,LogDir} | {event_handler,EventHandlers} | %%% {silent_connections,Conns} | {cover,CoverSpecFile} | -%%% {userconfig, UserCfgFiles} +%%% {cover_stop,Bool} | {userconfig, UserCfgFiles} %%% CfgFiles = string() | [string()] %%% TestDirs = string() | [string()] %%% Suites = atom() | [atom()] diff --git a/lib/common_test/src/ct_netconfc.erl b/lib/common_test/src/ct_netconfc.erl index 52fe9599ce..11c8235040 100644 --- a/lib/common_test/src/ct_netconfc.erl +++ b/lib/common_test/src/ct_netconfc.erl @@ -307,7 +307,7 @@ -type option() :: {ssh,host()} | {port,inet:port_number()} | {user,string()} | {password,string()} | {user_dir,string()} | {timeout,timeout()}. --type host() :: inet:host_name() | inet:ip_address(). +-type host() :: inet:hostname() | inet:ip_address(). -type notification() :: {notification, xml_attributes(), notification_content()}. -type notification_content() :: [event_time()|simple_xml()]. @@ -968,7 +968,7 @@ close_session(Client) -> %% @end %%---------------------------------------------------------------------- close_session(Client, Timeout) -> - call(Client,{send_rpc_op, close_session, [], Timeout}). + call(Client,{send_rpc_op, close_session, [], Timeout}, true). %%---------------------------------------------------------------------- @@ -1121,17 +1121,38 @@ close(Client) -> %% Internal functions %%---------------------------------------------------------------------- call(Client, Msg) -> - call(Client, Msg, infinity). -call(Client, Msg, Timeout) -> + call(Client, Msg, infinity, false). +call(Client, Msg, Timeout) when is_integer(Timeout); Timeout==infinity -> + call(Client, Msg, Timeout, false); +call(Client, Msg, WaitStop) when is_boolean(WaitStop) -> + call(Client, Msg, infinity, WaitStop). +call(Client, Msg, Timeout, WaitStop) -> case get_handle(Client) of {ok,Pid} -> case ct_gen_conn:call(Pid,Msg,Timeout) of - {error,{process_down,Client,noproc}} -> + {error,{process_down,Pid,noproc}} -> {error,no_such_client}; - {error,{process_down,Client,normal}} -> + {error,{process_down,Pid,normal}} when WaitStop -> + %% This will happen when server closes connection + %% before clien received rpc-reply on + %% close-session. + ok; + {error,{process_down,Pid,normal}} -> {error,closed}; - {error,{process_down,Client,Reason}} -> + {error,{process_down,Pid,Reason}} -> {error,{closed,Reason}}; + Other when WaitStop -> + MRef = erlang:monitor(process,Pid), + receive + {'DOWN',MRef,process,Pid,Normal} when Normal==normal; + Normal==noproc -> + Other; + {'DOWN',MRef,process,Pid,Reason} -> + {error,{{closed,Reason},Other}} + after Timeout -> + erlang:demonitor(MRef, [flush]), + {error,{timeout,Other}} + end; Other -> Other end; diff --git a/lib/common_test/src/ct_run.erl b/lib/common_test/src/ct_run.erl index 4a6a3cdcac..eb05c90ba8 100644 --- a/lib/common_test/src/ct_run.erl +++ b/lib/common_test/src/ct_run.erl @@ -58,6 +58,7 @@ vts, shell, cover, + cover_stop, coverspec, step, logdir, @@ -245,6 +246,7 @@ script_start1(Parent, Args) -> Vts = get_start_opt(vts, true, Args), Shell = get_start_opt(shell, true, Args), Cover = get_start_opt(cover, fun([CoverFile]) -> ?abs(CoverFile) end, Args), + CoverStop = get_start_opt(cover_stop, fun([CS]) -> list_to_atom(CS) end, Args), LogDir = get_start_opt(logdir, fun([LogD]) -> LogD end, Args), LogOpts = get_start_opt(logopts, fun(Os) -> [list_to_atom(O) || O <- Os] end, [], Args), @@ -329,7 +331,8 @@ script_start1(Parent, Args) -> end, StartOpts = #opts{label = Label, profile = Profile, - vts = Vts, shell = Shell, cover = Cover, + vts = Vts, shell = Shell, + cover = Cover, cover_stop = CoverStop, logdir = LogDir, logopts = LogOpts, basic_html = BasicHtml, verbosity = Verbosity, @@ -416,6 +419,9 @@ script_start2(StartOpts = #opts{vts = undefined, Cover = choose_val(StartOpts#opts.cover, SpecStartOpts#opts.cover), + CoverStop = + choose_val(StartOpts#opts.cover_stop, + SpecStartOpts#opts.cover_stop), MultTT = choose_val(StartOpts#opts.multiply_timetraps, SpecStartOpts#opts.multiply_timetraps), @@ -475,6 +481,7 @@ script_start2(StartOpts = #opts{vts = undefined, profile = Profile, testspecs = Specs, cover = Cover, + cover_stop = CoverStop, logdir = LogDir, logopts = AllLogOpts, basic_html = BasicHtml, @@ -723,6 +730,7 @@ script_usage() -> "\n\t[-silent_connections [ConnType1 ConnType2 .. ConnTypeN]]" "\n\t[-stylesheet CSSFile]" "\n\t[-cover CoverCfgFile]" + "\n\t[-cover_stop Bool]" "\n\t[-event_handler EvHandler1 EvHandler2 .. EvHandlerN]" "\n\t[-ct_hooks CTHook1 CTHook2 .. CTHookN]" "\n\t[-include InclDir1 InclDir2 .. InclDirN]" @@ -745,6 +753,7 @@ script_usage() -> "\n\t[-silent_connections [ConnType1 ConnType2 .. ConnTypeN]]" "\n\t[-stylesheet CSSFile]" "\n\t[-cover CoverCfgFile]" + "\n\t[-cover_stop Bool]" "\n\t[-event_handler EvHandler1 EvHandler2 .. EvHandlerN]" "\n\t[-ct_hooks CTHook1 CTHook2 .. CTHookN]" "\n\t[-include InclDir1 InclDir2 .. InclDirN]" @@ -938,6 +947,7 @@ run_test2(StartOpts) -> %% code coverage Cover = get_start_opt(cover, fun(CoverFile) -> ?abs(CoverFile) end, StartOpts), + CoverStop = get_start_opt(cover_stop, value, StartOpts), %% timetrap manipulation MultiplyTT = get_start_opt(multiply_timetraps, value, 1, StartOpts), @@ -1000,7 +1010,8 @@ run_test2(StartOpts) -> Step = get_start_opt(step, value, StartOpts), Opts = #opts{label = Label, profile = Profile, - cover = Cover, step = Step, logdir = LogDir, + cover = Cover, cover_stop = CoverStop, + step = Step, logdir = LogDir, logopts = LogOpts, basic_html = BasicHtml, config = CfgFiles, verbosity = Verbosity, @@ -1063,6 +1074,8 @@ run_spec_file(Relaxed, AllConfig = merge_vals([CfgFiles, SpecOpts#opts.config]), Cover = choose_val(Opts#opts.cover, SpecOpts#opts.cover), + CoverStop = choose_val(Opts#opts.cover_stop, + SpecOpts#opts.cover_stop), MultTT = choose_val(Opts#opts.multiply_timetraps, SpecOpts#opts.multiply_timetraps), ScaleTT = choose_val(Opts#opts.scale_timetraps, @@ -1103,6 +1116,7 @@ run_spec_file(Relaxed, Opts1 = Opts#opts{label = Label, profile = Profile, cover = Cover, + cover_stop = CoverStop, logdir = which(logdir, LogDir), logopts = AllLogOpts, stylesheet = Stylesheet, @@ -1272,7 +1286,8 @@ run_dir(Opts = #opts{logdir = LogDir, reformat_result(catch do_run(tests(Dir2, Mod), [], Opts1, StartOpts)); _ -> - reformat_result(catch do_run(tests(Dir2, Mod, GsAndCs), + reformat_result(catch do_run(tests(Dir2, Mod, + GsAndCs), [], Opts1, StartOpts)) end; @@ -1281,7 +1296,8 @@ run_dir(Opts = #opts{logdir = LogDir, [_,_|_] when GsAndCs /= [] -> exit({error,multiple_suites_and_cases}); [{Dir2,Mod}] when GsAndCs /= [] -> - reformat_result(catch do_run(tests(Dir2, Mod, GsAndCs), + reformat_result(catch do_run(tests(Dir2, Mod, + GsAndCs), [], Opts1, StartOpts)); DirMods -> reformat_result(catch do_run(tests(DirMods), @@ -1374,6 +1390,7 @@ get_data_for_node(#testspec{label = Labels, verbosity = VLvls, silent_connections = SilentConnsList, cover = CoverFs, + cover_stop = CoverStops, config = Cfgs, userconfig = UsrCfgs, event_handler = EvHs, @@ -1405,6 +1422,7 @@ get_data_for_node(#testspec{label = Labels, SCs -> SCs end, Cover = proplists:get_value(Node, CoverFs), + CoverStop = proplists:get_value(Node, CoverStops), MT = proplists:get_value(Node, MTs), ST = proplists:get_value(Node, STs), CreatePrivDir = proplists:get_value(Node, PDs), @@ -1423,6 +1441,7 @@ get_data_for_node(#testspec{label = Labels, verbosity = Verbosity, silent_connections = SilentConns, cover = Cover, + cover_stop = CoverStop, config = ConfigFiles, event_handlers = EvHandlers, ct_hooks = FiltCTHooks, @@ -1536,17 +1555,36 @@ groups_and_cases(Gs, Cs) when ((Gs == undefined) or (Gs == [])) and ((Cs == undefined) or (Cs == [])) -> []; groups_and_cases(Gs, Cs) when Gs == undefined ; Gs == [] -> - [ensure_atom(C) || C <- listify(Cs)]; -groups_and_cases(Gs, Cs) when Cs == undefined ; Cs == [] -> - [{ensure_atom(G),all} || G <- listify(Gs)]; -groups_and_cases(G, Cs) when is_atom(G) -> - [{G,[ensure_atom(C) || C <- listify(Cs)]}]; -groups_and_cases([G], Cs) -> - [{ensure_atom(G),[ensure_atom(C) || C <- listify(Cs)]}]; -groups_and_cases([_,_|_] , Cs) when Cs =/= [] -> - {error,multiple_groups_and_cases}; -groups_and_cases(_Gs, _Cs) -> - {error,incorrect_group_or_case_option}. + if (Cs == all) or (Cs == [all]) or (Cs == ["all"]) -> all; + true -> [ensure_atom(C) || C <- listify(Cs)] + end; +groups_and_cases(GOrGs, Cs) when (is_atom(GOrGs) orelse + (is_list(GOrGs) andalso + (is_atom(hd(GOrGs)) orelse + (is_list(hd(GOrGs)) andalso + is_atom(hd(hd(GOrGs))))))) -> + if (Cs == undefined) or (Cs == []) or + (Cs == all) or (Cs == [all]) or (Cs == ["all"]) -> + [{GOrGs,all}]; + true -> + [{GOrGs,[ensure_atom(C) || C <- listify(Cs)]}] + end; +groups_and_cases(Gs, Cs) when is_integer(hd(hd(Gs))) -> + %% if list of strings, this comes from 'ct_run -group G1 G2 ...' and + %% we need to parse the strings + Gs1 = + if (Gs == [all]) or (Gs == ["all"]) -> + all; + true -> + lists:map(fun(G) -> + {ok,Ts,_} = erl_scan:string(G++"."), + {ok,Term} = erl_parse:parse_term(Ts), + Term + end, Gs) + end, + groups_and_cases(Gs1, Cs); +groups_and_cases(Gs, Cs) -> + {error,{incorrect_group_or_case_option,Gs,Cs}}. tests(TestDir, Suites, []) when is_list(TestDir), is_integer(hd(TestDir)) -> [{?testdir(TestDir,Suites),ensure_atom(Suites),all}]; @@ -1576,14 +1614,7 @@ do_run(Tests, Misc, LogDir, LogOpts) when is_list(Misc), StepOpts -> #opts{step = StepOpts} end, - Opts1 = - case proplists:get_value(cover, Misc) of - undefined -> - Opts; - CoverFile -> - Opts#opts{cover = CoverFile} - end, - do_run(Tests, [], Opts1#opts{logdir = LogDir}, []); + do_run(Tests, [], Opts#opts{logdir = LogDir}, []); do_run(Tests, Skip, Opts, Args) when is_record(Opts, opts) -> #opts{label = Label, profile = Profile, cover = Cover, @@ -1617,7 +1648,13 @@ do_run(Tests, Skip, Opts, Args) when is_record(Opts, opts) -> {error,Reason} -> exit({error,Reason}); CoverSpec -> - Opts#opts{coverspec = CoverSpec} + CoverStop = + case Opts#opts.cover_stop of + undefined -> true; + Stop -> Stop + end, + Opts#opts{coverspec = CoverSpec, + cover_stop = CoverStop} end end, %% This env variable is used by test_server to determine @@ -1687,11 +1724,15 @@ compile_and_run(Tests, Skip, Opts, Args) -> SavedErrors = save_make_errors(SuiteMakeErrors), ct_repeat:log_loop_info(Args), - {Tests1,Skip1} = final_tests(Tests,Skip,SavedErrors), - - ReleaseSh = proplists:get_value(release_shell, Args), - ct_util:set_testdata({release_shell,ReleaseSh}), - possibly_spawn(ReleaseSh == true, Tests1, Skip1, Opts); + try final_tests(Tests,Skip,SavedErrors) of + {Tests1,Skip1} -> + ReleaseSh = proplists:get_value(release_shell, Args), + ct_util:set_testdata({release_shell,ReleaseSh}), + possibly_spawn(ReleaseSh == true, Tests1, Skip1, Opts) + catch + _:BadFormat -> + {error,BadFormat} + end; false -> io:nl(), ct_util:stop(clean), @@ -1961,22 +2002,21 @@ final_tests1([{TestDir,Suite,GrsOrCs}|Tests], Final, Skip, Bad) when %% for now, only flat group defs are allowed as %% start options and test spec terms fun({all,all}) -> - ct_framework:make_all_conf(TestDir, - Suite, []); + [ct_groups:make_conf(TestDir, Suite, all, [], all)]; ({skipped,Group,TCs}) -> - [ct_framework:make_conf(TestDir, Suite, - Group, [skipped], TCs)]; - ({GrSpec = {Group,_},TCs}) -> + [ct_groups:make_conf(TestDir, Suite, + Group, [skipped], TCs)]; + ({GrSpec = {GroupName,_},TCs}) -> Props = [{override,GrSpec}], - [ct_framework:make_conf(TestDir, Suite, - Group, Props, TCs)]; - ({GrSpec = {Group,_,_},TCs}) -> + [ct_groups:make_conf(TestDir, Suite, + GroupName, Props, TCs)]; + ({GrSpec = {GroupName,_,_},TCs}) -> Props = [{override,GrSpec}], - [ct_framework:make_conf(TestDir, Suite, - Group, Props, TCs)]; - ({Group,TCs}) -> - [ct_framework:make_conf(TestDir, Suite, - Group, [], TCs)]; + [ct_groups:make_conf(TestDir, Suite, + GroupName, Props, TCs)]; + ({GroupOrGroups,TCs}) -> + [ct_groups:make_conf(TestDir, Suite, + GroupOrGroups, [], TCs)]; (TC) -> [TC] end, GrsOrCs), @@ -1988,12 +2028,12 @@ final_tests1([], Final, Skip, _Bad) -> {lists:reverse(Final),Skip}. final_skip([{TestDir,Suite,{all,all},Reason}|Skips], Final) -> - SkipConf = ct_framework:make_conf(TestDir, Suite, all, [], all), + SkipConf = ct_groups:make_conf(TestDir, Suite, all, [], all), Skip = {TestDir,Suite,SkipConf,Reason}, final_skip(Skips, [Skip|Final]); final_skip([{TestDir,Suite,{Group,TCs},Reason}|Skips], Final) -> - Conf = ct_framework:make_conf(TestDir, Suite, Group, [], TCs), + Conf = ct_groups:make_conf(TestDir, Suite, Group, [], TCs), Skip = {TestDir,Suite,Conf,Reason}, final_skip(Skips, [Skip|Final]); @@ -2120,7 +2160,8 @@ do_run_test(Tests, Skip, Opts) -> %% tell test_server which modules should be cover compiled %% note that actual compilation is done when tests start test_server_ctrl:cover(CovApp, CovFile, CovExcl, CovIncl, - CovCross, CovExport, CovLevel), + CovCross, CovExport, CovLevel, + Opts#opts.cover_stop), %% save cover data (used e.g. to add nodes dynamically) ct_util:set_testdata({cover,CovData}), %% start cover on specified nodes @@ -2265,9 +2306,11 @@ add_jobs([{TestDir,all,_}|Tests], Skip, Opts, CleanUp) -> wait_for_idle(), add_jobs(Tests, Skip, Opts, CleanUp) end; -add_jobs([{TestDir,[Suite],all}|Tests], Skip, Opts, CleanUp) when is_atom(Suite) -> +add_jobs([{TestDir,[Suite],all}|Tests], Skip, + Opts, CleanUp) when is_atom(Suite) -> add_jobs([{TestDir,Suite,all}|Tests], Skip, Opts, CleanUp); -add_jobs([{TestDir,Suites,all}|Tests], Skip, Opts, CleanUp) when is_list(Suites) -> +add_jobs([{TestDir,Suites,all}|Tests], Skip, + Opts, CleanUp) when is_list(Suites) -> Name = get_name(TestDir) ++ ".suites", case catch test_server_ctrl:add_module_with_skip(Name, Suites, skiplist(TestDir,Skip)) of @@ -2282,7 +2325,8 @@ add_jobs([{TestDir,Suite,all}|Tests], Skip, Opts, CleanUp) -> ok -> Name = get_name(TestDir) ++ "." ++ atom_to_list(Suite), case catch test_server_ctrl:add_module_with_skip(Name, [Suite], - skiplist(TestDir,Skip)) of + skiplist(TestDir, + Skip)) of {'EXIT',_} -> CleanUp; _ -> @@ -2305,15 +2349,24 @@ add_jobs([{TestDir,Suite,Confs}|Tests], Skip, Opts, CleanUp) when GrTestName = case Confs of [Conf] -> - "." ++ atom_to_list(Group(Conf)) ++ TCTestName(TestCases(Conf)); + case Group(Conf) of + GrName when is_atom(GrName) -> + "." ++ atom_to_list(GrName) ++ + TCTestName(TestCases(Conf)); + _ -> + ".groups" ++ TCTestName(TestCases(Conf)) + end; _ -> ".groups" end, TestName = get_name(TestDir) ++ "." ++ atom_to_list(Suite) ++ GrTestName, case maybe_interpret(Suite, init_per_group, Opts) of ok -> - case catch test_server_ctrl:add_conf_with_skip(TestName, Suite, Confs, - skiplist(TestDir,Skip)) of + case catch test_server_ctrl:add_conf_with_skip(TestName, + Suite, + Confs, + skiplist(TestDir, + Skip)) of {'EXIT',_} -> CleanUp; _ -> @@ -2325,18 +2378,21 @@ add_jobs([{TestDir,Suite,Confs}|Tests], Skip, Opts, CleanUp) when end; %% test case -add_jobs([{TestDir,Suite,[Case]}|Tests], Skip, Opts, CleanUp) when is_atom(Case) -> +add_jobs([{TestDir,Suite,[Case]}|Tests], + Skip, Opts, CleanUp) when is_atom(Case) -> add_jobs([{TestDir,Suite,Case}|Tests], Skip, Opts, CleanUp); -add_jobs([{TestDir,Suite,Cases}|Tests], Skip, Opts, CleanUp) when is_list(Cases) -> +add_jobs([{TestDir,Suite,Cases}|Tests], + Skip, Opts, CleanUp) when is_list(Cases) -> Cases1 = lists:map(fun({GroupName,_}) when is_atom(GroupName) -> GroupName; (Case) -> Case end, Cases), case maybe_interpret(Suite, Cases1, Opts) of ok -> - Name = get_name(TestDir) ++ "." ++ atom_to_list(Suite) ++ ".cases", + Name = get_name(TestDir) ++ "." ++ atom_to_list(Suite) ++ ".cases", case catch test_server_ctrl:add_cases_with_skip(Name, Suite, Cases1, - skiplist(TestDir,Skip)) of + skiplist(TestDir, + Skip)) of {'EXIT',_} -> CleanUp; _ -> @@ -2352,7 +2408,8 @@ add_jobs([{TestDir,Suite,Case}|Tests], Skip, Opts, CleanUp) when is_atom(Case) - Name = get_name(TestDir) ++ "." ++ atom_to_list(Suite) ++ "." ++ atom_to_list(Case), case catch test_server_ctrl:add_case_with_skip(Name, Suite, Case, - skiplist(TestDir,Skip)) of + skiplist(TestDir, + Skip)) of {'EXIT',_} -> CleanUp; _ -> @@ -2387,7 +2444,8 @@ skiplist(Dir, [{Dir,all,Cmt}|Skip]) -> %% we need to turn 'all' into list of modules since %% test_server doesn't do skips on Dir level Ss = filelib:wildcard(filename:join(Dir, "*_SUITE.beam")), - [{list_to_atom(filename:basename(S,".beam")),Cmt} || S <- Ss] ++ skiplist(Dir,Skip); + [{list_to_atom(filename:basename(S,".beam")),Cmt} || S <- Ss] ++ + skiplist(Dir,Skip); skiplist(Dir, [{Dir,S,Cmt}|Skip]) -> [{S,Cmt} | skiplist(Dir, Skip)]; skiplist(Dir, [{Dir,S,C,Cmt}|Skip]) -> @@ -2447,8 +2505,10 @@ run_make(Targets, TestDir0, Mod, UserInclude) -> FileTest = fun(F, suites) -> is_suite(F); (F, helpmods) -> not is_suite(F) end, - Files = lists:flatmap(fun({F,out_of_date}) -> - case FileTest(F, Targets) of + Files = + lists:flatmap(fun({F,out_of_date}) -> + case FileTest(F, + Targets) of true -> [F]; false -> [] end; @@ -2584,6 +2644,9 @@ merge_arguments([LogDir={logdir,_}|Args], Merged) -> merge_arguments([CoverFile={cover,_}|Args], Merged) -> merge_arguments(Args, handle_arg(replace, CoverFile, Merged)); +merge_arguments([CoverStop={cover_stop,_}|Args], Merged) -> + merge_arguments(Args, handle_arg(replace, CoverStop, Merged)); + merge_arguments([{'case',TC}|Args], Merged) -> merge_arguments(Args, handle_arg(merge, {testcase,TC}, Merged)); @@ -2792,11 +2855,14 @@ opts2args(EnvStartOpts) -> lists:flatmap(fun({exit_status,ExitStatusOpt}) when is_atom(ExitStatusOpt) -> [{exit_status,[atom_to_list(ExitStatusOpt)]}]; ({halt_with,{HaltM,HaltF}}) -> - [{halt_with,[atom_to_list(HaltM),atom_to_list(HaltF)]}]; + [{halt_with,[atom_to_list(HaltM), + atom_to_list(HaltF)]}]; ({interactive_mode,true}) -> [{shell,[]}]; - ({config,CfgFiles}) -> - [{ct_config,[CfgFiles]}]; + ({config,CfgFile}) when is_integer(hd(CfgFile)) -> + [{ct_config,[CfgFile]}]; + ({config,CfgFiles}) when is_list(hd(CfgFiles)) -> + [{ct_config,CfgFiles}]; ({userconfig,{CBM,CfgStr=[X|_]}}) when is_integer(X) -> [{userconfig,[atom_to_list(CBM),CfgStr]}]; ({userconfig,{CBM,CfgStrs}}) when is_list(CfgStrs) -> @@ -2814,6 +2880,12 @@ opts2args(EnvStartOpts) -> end, UserCfg), [_LastAnd|StrsR] = lists:reverse(lists:flatten(Strs)), [{userconfig,lists:reverse(StrsR)}]; + ({group,G}) when is_atom(G) -> + [{group,[atom_to_list(G)]}]; + ({group,Gs}) when is_list(Gs) -> + LOfGStrs = [lists:flatten(io_lib:format("~w",[G])) || + G <- Gs], + [{group,LOfGStrs}]; ({testcase,Case}) when is_atom(Case) -> [{'case',[atom_to_list(Case)]}]; ({testcase,Cases}) -> diff --git a/lib/common_test/src/ct_slave.erl b/lib/common_test/src/ct_slave.erl index aa3413fa89..58633b7de6 100644 --- a/lib/common_test/src/ct_slave.erl +++ b/lib/common_test/src/ct_slave.erl @@ -1,7 +1,7 @@ %%-------------------------------------------------------------------- %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010. All Rights Reserved. +%% Copyright Ericsson AB 2010-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -37,7 +37,7 @@ -record(options, {username, password, boot_timeout, init_timeout, startup_timeout, startup_functions, monitor_master, - kill_if_fail, erl_flags}). + kill_if_fail, erl_flags, env}). %%%----------------------------------------------------------------- %%% @spec start(Node) -> Result @@ -85,7 +85,8 @@ start(Host, Node) -> %%% {startup_functions, StartupFunctions} | %%% {monitor_master, Monitor} | %%% {kill_if_fail, KillIfFail} | -%%% {erl_flags, ErlangFlags} +%%% {erl_flags, ErlangFlags} | +%%% {env, [{EnvVar,Value}]} %%% Username = string() %%% Password = string() %%% BootTimeout = integer() @@ -99,6 +100,8 @@ start(Host, Node) -> %%% Monitor = bool() %%% KillIfFail = bool() %%% ErlangFlags = string() +%%% EnvVar = string() +%%% Value = string() %%% Result = {ok, NodeName} | {error, already_started, NodeName} | %%% {error, started_not_connected, NodeName} | %%% {error, boot_timeout, NodeName} | @@ -152,6 +155,9 @@ start(Host, Node) -> %%% <p>Option <code>erlang_flags</code> specifies, which flags will be added %%% to the parameters of the <code>erl</code> executable.</p> %%% +%%% <p>Option <code>env</code> specifies a list of environment variables +%%% that will extended the environment.</p> +%%% %%% <p>Special return values are: %%% <list> %%% <item><code>{error, already_started, NodeName}</code> - if the node with @@ -233,10 +239,12 @@ fetch_options(Options) -> Monitor = get_option_value(monitor_master, Options, false), KillIfFail = get_option_value(kill_if_fail, Options, true), ErlFlags = get_option_value(erl_flags, Options, []), + EnvVars = get_option_value(env, Options, []), #options{username=UserName, password=Password, boot_timeout=BootTimeout, init_timeout=InitTimeout, startup_timeout=StartupTimeout, startup_functions=StartupFunctions, - monitor_master=Monitor, kill_if_fail=KillIfFail, erl_flags=ErlFlags}. + monitor_master=Monitor, kill_if_fail=KillIfFail, + erl_flags=ErlFlags, env=EnvVars}. % send a message when slave node is started % @hidden @@ -306,11 +314,19 @@ do_start(Host, Node, Options) -> true-> spawn_remote_node(Host, Node, Options) end, + BootTimeout = Options#options.boot_timeout, InitTimeout = Options#options.init_timeout, StartupTimeout = Options#options.startup_timeout, Result = case wait_for_node_alive(ENode, BootTimeout) of pong-> + case test_server:is_cover() of + true -> + MainCoverNode = cover:get_main_node(), + rpc:call(MainCoverNode,cover,start,[ENode]); + false -> + ok + end, call_functions(ENode, Functions2), receive {node_started, ENode}-> @@ -365,9 +381,9 @@ get_cmd(Node, Flags) -> % spawn node locally spawn_local_node(Node, Options) -> - ErlFlags = Options#options.erl_flags, + #options{env=Env,erl_flags=ErlFlags} = Options, Cmd = get_cmd(Node, ErlFlags), - open_port({spawn, Cmd}, [stream]). + open_port({spawn, Cmd}, [stream,{env,Env}]). % start crypto and ssh if not yet started check_for_ssh_running() -> @@ -386,9 +402,10 @@ check_for_ssh_running() -> % spawn node remotely spawn_remote_node(Host, Node, Options) -> - Username = Options#options.username, - Password = Options#options.password, - ErlFlags = Options#options.erl_flags, + #options{username=Username, + password=Password, + erl_flags=ErlFlags, + env=Env} = Options, SSHOptions = case {Username, Password} of {[], []}-> []; @@ -400,8 +417,17 @@ spawn_remote_node(Host, Node, Options) -> check_for_ssh_running(), {ok, SSHConnRef} = ssh:connect(atom_to_list(Host), 22, SSHOptions), {ok, SSHChannelId} = ssh_connection:session_channel(SSHConnRef, infinity), + ssh_setenv(SSHConnRef, SSHChannelId, Env), ssh_connection:exec(SSHConnRef, SSHChannelId, get_cmd(Node, ErlFlags), infinity). + +ssh_setenv(SSHConnRef, SSHChannelId, [{Var, Value} | Vars]) + when is_list(Var), is_list(Value) -> + success = ssh_connection:setenv(SSHConnRef, SSHChannelId, + Var, Value, infinity), + ssh_setenv(SSHConnRef, SSHChannelId, Vars); +ssh_setenv(_SSHConnRef, _SSHChannelId, []) -> ok. + % call functions on a remote Erlang node call_functions(_Node, []) -> ok; @@ -423,6 +449,13 @@ wait_for_node_alive(Node, N) -> % call init:stop on a remote node do_stop(ENode) -> + case test_server:is_cover() of + true -> + MainCoverNode = cover:get_main_node(), + rpc:call(MainCoverNode,cover,flush,[ENode]); + false -> + ok + end, spawn(ENode, init, stop, []), wait_for_node_dead(ENode, 5). diff --git a/lib/common_test/src/ct_testspec.erl b/lib/common_test/src/ct_testspec.erl index a8b67d0329..202d8f9373 100644 --- a/lib/common_test/src/ct_testspec.erl +++ b/lib/common_test/src/ct_testspec.erl @@ -903,6 +903,8 @@ handle_data(logdir,Node,Dir,Spec) -> [{Node,ref2dir(Dir,Spec)}]; handle_data(cover,Node,File,Spec) -> [{Node,get_absfile(File,Spec)}]; +handle_data(cover_stop,Node,Stop,_Spec) -> + [{Node,Stop}]; handle_data(include,Node,Dirs=[D|_],Spec) when is_list(D) -> [{Node,ref2dir(Dir,Spec)} || Dir <- Dirs]; handle_data(include,Node,Dir=[Ch|_],Spec) when is_integer(Ch) -> @@ -1026,20 +1028,24 @@ insert_groups(Node,Dir,Suite,Group,Cases,Tests,MergeTests) insert_groups(Node,Dir,Suite,[Group],Cases,Tests,MergeTests); insert_groups(Node,Dir,Suite,Groups,Cases,Tests,false) when ((Cases == all) or is_list(Cases)) and is_list(Groups) -> - Groups1 = [{Gr,Cases} || Gr <- Groups], + Groups1 = [if is_list(Gr) -> % preserve group path + {[Gr],Cases}; + true -> + {Gr,Cases} end || Gr <- Groups], append({{Node,Dir},[{Suite,Groups1}]},Tests); insert_groups(Node,Dir,Suite,Groups,Cases,Tests,true) when ((Cases == all) or is_list(Cases)) and is_list(Groups) -> + Groups1 = [if is_list(Gr) -> % preserve group path + {[Gr],Cases}; + true -> + {Gr,Cases} end || Gr <- Groups], case lists:keysearch({Node,Dir},1,Tests) of {value,{{Node,Dir},[{all,_}]}} -> Tests; {value,{{Node,Dir},Suites0}} -> - Suites1 = insert_groups1(Suite, - [{Gr,Cases} || Gr <- Groups], - Suites0), + Suites1 = insert_groups1(Suite,Groups1,Suites0), insert_in_order({{Node,Dir},Suites1},Tests); false -> - Groups1 = [{Gr,Cases} || Gr <- Groups], insert_in_order({{Node,Dir},[{Suite,Groups1}]},Tests) end; insert_groups(Node,Dir,Suite,Groups,Case,Tests, MergeTests) @@ -1062,13 +1068,13 @@ insert_groups1(Suite,Groups,Suites0) -> insert_groups2(_Groups,all) -> all; -insert_groups2([Group={GrName,Cases}|Groups],GrAndCases) -> - case lists:keysearch(GrName,1,GrAndCases) of - {value,{GrName,all}} -> +insert_groups2([Group={Gr,Cases}|Groups],GrAndCases) -> + case lists:keysearch(Gr,1,GrAndCases) of + {value,{Gr,all}} -> GrAndCases; - {value,{GrName,Cases0}} -> + {value,{Gr,Cases0}} -> Cases1 = insert_in_order(Cases,Cases0), - insert_groups2(Groups,insert_in_order({GrName,Cases1},GrAndCases)); + insert_groups2(Groups,insert_in_order({Gr,Cases1},GrAndCases)); false -> insert_groups2(Groups,insert_in_order(Group,GrAndCases)) end; @@ -1258,6 +1264,8 @@ valid_terms() -> {node,3}, {cover,2}, {cover,3}, + {cover_stop,2}, + {cover_stop,3}, {config,2}, {config,3}, {config,4}, diff --git a/lib/common_test/src/ct_util.hrl b/lib/common_test/src/ct_util.hrl index 196b5e46d0..c9c6514fa4 100644 --- a/lib/common_test/src/ct_util.hrl +++ b/lib/common_test/src/ct_util.hrl @@ -38,6 +38,7 @@ verbosity=[], silent_connections=[], cover=[], + cover_stop=[], config=[], userconfig=[], event_handler=[], diff --git a/lib/common_test/src/cth_conn_log.erl b/lib/common_test/src/cth_conn_log.erl index 3af89db3a5..255f3ec78a 100644 --- a/lib/common_test/src/cth_conn_log.erl +++ b/lib/common_test/src/cth_conn_log.erl @@ -58,7 +58,7 @@ -spec init(Id, HookOpts) -> Result when Id :: term(), - HookOpts :: ct:hook_options(), + HookOpts :: ct_netconfc:hook_options(), Result :: {ok,[{ct_netconfc:conn_mod(), {ct_netconfc:log_type(),[ct_netconfc:key_or_name()]}}]}. init(_Id, HookOpts) -> diff --git a/lib/common_test/src/cth_log_redirect.erl b/lib/common_test/src/cth_log_redirect.erl index 77f57c6195..78ae70f37e 100644 --- a/lib/common_test/src/cth_log_redirect.erl +++ b/lib/common_test/src/cth_log_redirect.erl @@ -54,7 +54,7 @@ post_init_per_group(_Group, _Config, Result, State) -> post_end_per_testcase(_TC, _Config, Result, State) -> %% Make sure that the event queue is flushed %% before ending this test case. - gen_event:call(error_logger, ?MODULE, flush), + gen_event:call(error_logger, ?MODULE, flush, 300000), {Result, State}. pre_end_per_group(Group, Config, {ct_log, Group}) -> diff --git a/lib/common_test/test/Makefile b/lib/common_test/test/Makefile index 64e2cb6507..df816f9a61 100644 --- a/lib/common_test/test/Makefile +++ b/lib/common_test/test/Makefile @@ -54,7 +54,9 @@ MODULES= \ ct_shell_SUITE \ ct_system_error_SUITE \ ct_snmp_SUITE \ - ct_group_leader_SUITE + ct_group_leader_SUITE \ + ct_cover_SUITE \ + ct_groups_search_SUITE ERL_FILES= $(MODULES:%=%.erl) @@ -108,7 +110,7 @@ release_spec: opt release_tests_spec: $(INSTALL_DIR) "$(RELSYSDIR)" $(INSTALL_DATA) $(ERL_FILES) $(COVERFILE) "$(RELSYSDIR)" - $(INSTALL_DATA) common_test.spec "$(RELSYSDIR)" + $(INSTALL_DATA) common_test.spec common_test.cover "$(RELSYSDIR)" chmod -R u+w "$(RELSYSDIR)" @tar cf - *_SUITE_data | (cd "$(RELSYSDIR)"; tar xf -) diff --git a/lib/common_test/test/common_test.cover b/lib/common_test/test/common_test.cover new file mode 100644 index 0000000000..66697854ea --- /dev/null +++ b/lib/common_test/test/common_test.cover @@ -0,0 +1,10 @@ +%% -*- erlang -*- +{incl_app,common_test,details}. +{cross_apps,common_test,[erl2html2, + test_server, + test_server_ctrl, + test_server_gl, + test_server_h, + test_server_io, + test_server_node, + test_server_sup]}. diff --git a/lib/common_test/test/ct_config_SUITE.erl b/lib/common_test/test/ct_config_SUITE.erl index 0b1abae757..d92be9ec6e 100644 --- a/lib/common_test/test/ct_config_SUITE.erl +++ b/lib/common_test/test/ct_config_SUITE.erl @@ -88,8 +88,8 @@ require(Config) when is_list(Config) -> DataDir = ?config(data_dir, Config), run_test(config_static_SUITE, Config, - [{config, filename:join(DataDir, "config/shadow.txt")}, - {config, filename:join(DataDir, "config/config.txt")}], + [{config, [filename:join(DataDir, "config/shadow.txt"), + filename:join(DataDir, "config/config.txt")]}], ["config_static_SUITE"]). install_config(Config) when is_list(Config) -> @@ -174,6 +174,7 @@ run_test(Name, Config, CTConfig, SuiteNames)-> Joiner = fun(Suite) -> filename:join(DataDir, "config/test/"++Suite) end, Suites = lists:map(Joiner, SuiteNames), {Opts,ERPid} = setup_env({suite,Suites}, Config, CTConfig), + ok = ct_test_support:run(Opts, Config), TestEvents = ct_test_support:get_events(ERPid, Config), ct_test_support:log_events(Name, @@ -251,6 +252,7 @@ expected_events(config_static_SUITE)-> ?sok(test_alias_tclocal_nested,{14,0,{2,1}}), ?sok(test_alias_tclocal_nested_backward_compat,{15,0,{2,1}}), ?sok(test_alias_tclocal_nested_backward_compat_subvals,{16,0,{2,1}}), + ?sok(test_config_same_name_already_in_use,{17,0,{2,1}}), {?eh,tc_start,{config_static_SUITE,end_per_suite}}, {?eh,tc_done,{config_static_SUITE,end_per_suite,ok}}, {?eh,test_done,{'DEF','STOP_TIME'}}, diff --git a/lib/common_test/test/ct_config_SUITE_data/config/test/config_static_SUITE.erl b/lib/common_test/test/ct_config_SUITE_data/config/test/config_static_SUITE.erl index 2e1ad651e8..19f1dab4af 100644 --- a/lib/common_test/test/ct_config_SUITE_data/config/test/config_static_SUITE.erl +++ b/lib/common_test/test/ct_config_SUITE_data/config/test/config_static_SUITE.erl @@ -64,7 +64,8 @@ all() -> [test_get_config_simple, test_get_config_nested, test_shadow_all,test_element,test_shadow_all_element, test_internal_deep, test_alias_tclocal_nested, test_alias_tclocal_nested_backward_compat, - test_alias_tclocal_nested_backward_compat_subvals + test_alias_tclocal_nested_backward_compat_subvals, + test_config_same_name_already_in_use ]. init_per_testcase(_,Config) -> @@ -124,6 +125,13 @@ test_config_name_already_in_use2(_) -> ct:fail("Test should've been skipped, you shouldn't see this!"), ok. + +test_config_same_name_already_in_use() -> + []. +test_config_same_name_already_in_use(_) -> + ok = ct:require(x2,{gen_cfg,c}), + ok = ct:require(x2,{gen_cfg,c}). + %% test aliases test_alias_tclocal() -> [{require,newalias,gen_cfg}]. diff --git a/lib/common_test/test/ct_config_info_SUITE.erl b/lib/common_test/test/ct_config_info_SUITE.erl index 40da377ee5..10fe8286dd 100644 --- a/lib/common_test/test/ct_config_info_SUITE.erl +++ b/lib/common_test/test/ct_config_info_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2009-2011. All Rights Reserved. +%% Copyright Ericsson AB 2009-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -123,8 +123,7 @@ test_events(config_info) -> {?eh,tc_done,{config_info_1_SUITE,init_per_suite,ok}}, [{?eh,tc_start,{config_info_1_SUITE,{init_per_group,g1,[]}}}, - {?eh,tc_done,{config_info_1_SUITE, - {init_per_group,unknown,[]}, + {?eh,tc_done,{config_info_1_SUITE,{init_per_group,g1,[]}, {failed,{timetrap_timeout,350}}}}, {?eh,tc_auto_skip,{config_info_1_SUITE,t11, {failed,{config_info_1_SUITE,init_per_group,{timetrap_timeout,350}}}}}, @@ -136,14 +135,12 @@ test_events(config_info) -> {?eh,tc_done,{config_info_1_SUITE,{init_per_group,g2,[]},ok}}, {?eh,tc_done,{config_info_1_SUITE,t21,ok}}, {?eh,tc_start,{config_info_1_SUITE,{end_per_group,g2,[]}}}, - {?eh,tc_done,{config_info_1_SUITE, - {end_per_group,unknown,[]}, + {?eh,tc_done,{config_info_1_SUITE,{end_per_group,g2,[]}, {failed,{timetrap_timeout,450}}}}], [{?eh,tc_start,{config_info_1_SUITE,{init_per_group,g3,[]}}}, {?eh,tc_done,{config_info_1_SUITE,{init_per_group,g3,[]},ok}}, [{?eh,tc_start,{config_info_1_SUITE,{init_per_group,g4,[]}}}, - {?eh,tc_done,{config_info_1_SUITE, - {init_per_group,unknown,[]}, + {?eh,tc_done,{config_info_1_SUITE,{init_per_group,g4,[]}, {failed,{timetrap_timeout,400}}}}, {?eh,tc_auto_skip,{config_info_1_SUITE,t41, {failed,{config_info_1_SUITE,init_per_group, @@ -164,8 +161,7 @@ test_events(config_info) -> {?eh,tc_done,{config_info_1_SUITE,{init_per_group,g5,[]},ok}}, {?eh,tc_done,{config_info_1_SUITE,t51,ok}}, {?eh,tc_start,{config_info_1_SUITE,{end_per_group,g5,[]}}}, - {?eh,tc_done,{config_info_1_SUITE, - {end_per_group,unknown,[]}, + {?eh,tc_done,{config_info_1_SUITE,{end_per_group,g5,[]}, {failed,{timetrap_timeout,400}}}}], {?eh,tc_start,{config_info_1_SUITE,{end_per_group,g3,[]}}}, {?eh,tc_done,{config_info_1_SUITE,{end_per_group,g3,[]},ok}}], diff --git a/lib/common_test/test/ct_cover_SUITE.erl b/lib/common_test/test/ct_cover_SUITE.erl new file mode 100644 index 0000000000..bebfce70d0 --- /dev/null +++ b/lib/common_test/test/ct_cover_SUITE.erl @@ -0,0 +1,271 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2012. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% +%% + +%%%------------------------------------------------------------------- +%%% File: ct_cover_SUITE +%%% +%%% Description: +%%% Test code cover analysis support +%%% +%%%------------------------------------------------------------------- +-module(ct_cover_SUITE). + +-compile(export_all). + +-include_lib("common_test/include/ct.hrl"). +-include_lib("common_test/include/ct_event.hrl"). + +-define(eh, ct_test_support_eh). +-define(suite, cover_SUITE). +-define(mod, cover_test_mod). + +%%-------------------------------------------------------------------- +%% TEST SERVER CALLBACK FUNCTIONS +%%-------------------------------------------------------------------- + +%%-------------------------------------------------------------------- +%% Description: Since Common Test starts another Test Server +%% instance, the tests need to be performed on a separate node (or +%% there will be clashes with logging processes etc). +%%-------------------------------------------------------------------- +init_per_suite(Config) -> + case test_server:is_cover() of + true -> + {skip,"Test server is running cover already - skipping"}; + false -> + ct_test_support:init_per_suite(Config) + end. + +end_per_suite(Config) -> + ct_test_support:end_per_suite(Config). + +init_per_testcase(TestCase, Config) -> + ct_test_support:init_per_testcase(TestCase, Config). + +end_per_testcase(TestCase, Config) -> + Node = fullname(existing_node), + case lists:member(Node,nodes()) of + true -> rpc:call(Node,erlang,halt,[]); + false -> ok + end, + ct_test_support:end_per_testcase(TestCase, Config). + +suite() -> [{ct_hooks,[ts_install_cth]}]. + +all() -> + [ + default, + cover_stop_true, + cover_stop_false, + slave, + slave_start_slave, + cover_node_option, + ct_cover_add_remove_nodes, + otp_9956 + ]. + +%%-------------------------------------------------------------------- +%% TEST CASES +%%-------------------------------------------------------------------- + +%% Check that cover is collected from test node +%% Also check that cover is by default stopped after test is completed +default(Config) -> + {ok,Events} = run_test(default,Config), + false = check_cover(Config), + check_calls(Events,1), + ok. + +%% Check that cover is stopped when cover_stop option is set to true +cover_stop_true(Config) -> + {ok,_Events} = run_test(cover_stop_true,[{cover_stop,true}],Config), + false = check_cover(Config). + +%% Check that cover is not stopped when cover_stop option is set to false +cover_stop_false(Config) -> + {ok,_Events} = run_test(cover_stop_false,[{cover_stop,false}],Config), + {true,[],[?mod]} = check_cover(Config), + CTNode = proplists:get_value(ct_node, Config), + ok = rpc:call(CTNode,cover,stop,[]), + false = check_cover(Config), + ok. + +%% Let test node start a slave node - check that cover is collected +%% from both nodes +slave(Config) -> + {ok,Events} = run_test(slave,slave,[],Config), + check_calls(Events,2), + ok. + +%% Let test node start a slave node which in turn starts another slave +%% node - check that cover is collected from all three nodes +slave_start_slave(Config) -> + {ok,Events} = run_test(slave_start_slave,slave_start_slave,[],Config), + check_calls(Events,3), + ok. + +%% Start a slave node before test starts - the node is listed in cover +%% spec file. +%% Check that cover is collected from test node and slave node. +cover_node_option(Config) -> + {ok, HostStr}=inet:gethostname(), + Host = list_to_atom(HostStr), + DataDir = ?config(data_dir,Config), + {ok,Node} = ct_slave:start(Host,existing_node, + [{erl_flags,"-pa " ++ DataDir}]), + false = check_cover(Node), + CoverSpec = default_cover_file_content() ++ [{nodes,[Node]}], + CoverFile = create_cover_file(cover_node_option,CoverSpec,Config), + {ok,Events} = run_test(cover_node_option,cover_node_option, + [{cover,CoverFile}],Config), + check_calls(Events,2), + {ok,Node} = ct_slave:stop(existing_node), + ok. + +%% Test ct_cover:add_nodes/1 and ct_cover:remove_nodes/1 +%% Check that cover is collected from added node +ct_cover_add_remove_nodes(Config) -> + {ok, HostStr}=inet:gethostname(), + Host = list_to_atom(HostStr), + DataDir = ?config(data_dir,Config), + {ok,Node} = ct_slave:start(Host,existing_node, + [{erl_flags,"-pa " ++ DataDir}]), + false = check_cover(Node), + {ok,Events} = run_test(ct_cover_add_remove_nodes,ct_cover_add_remove_nodes, + [],Config), + check_calls(Events,2), + {ok,Node} = ct_slave:stop(existing_node), + ok. + +%% Test that the test suite itself can be cover compiled and that +%% data_dir is set correctly (OTP-9956) +otp_9956(Config) -> + CoverFile = create_cover_file(otp_9956,[{incl_mods,[?suite]}],Config), + {ok,Events} = run_test(otp_9956,otp_9956,[{cover,CoverFile}],Config), + check_calls(Events,{?suite,otp_9956,1},1), + ok. + + +%%%----------------------------------------------------------------- +%%% HELP FUNCTIONS +%%%----------------------------------------------------------------- +run_test(Label,Config) -> + run_test(Label,[],Config). +run_test(Label,ExtraOpts,Config) -> + run_test(Label,default,ExtraOpts,Config). +run_test(Label,Testcase,ExtraOpts,Config) -> + DataDir = ?config(data_dir, Config), + Suite = filename:join(DataDir, ?suite), + CoverFile = + case proplists:get_value(cover,ExtraOpts) of + undefined -> + create_default_cover_file(Label,Config); + CF -> + CF + end, + RestOpts = lists:keydelete(cover,1,ExtraOpts), + {Opts,ERPid} = setup([{suite,Suite},{testcase,Testcase}, + {cover,CoverFile},{label,Label}] ++ RestOpts, Config), + execute(Label, Testcase, Opts, ERPid, Config). + +setup(Test, Config) -> + Opts0 = ct_test_support:get_opts(Config), + Level = ?config(trace_level, Config), + EvHArgs = [{cbm,ct_test_support},{trace_level,Level}], + Opts = Opts0 ++ [{event_handler,{?eh,EvHArgs}}|Test], + ERPid = ct_test_support:start_event_receiver(Config), + {Opts,ERPid}. + +execute(Name, Testcase, Opts, ERPid, Config) -> + ok = ct_test_support:run(Opts, Config), + Events = ct_test_support:get_events(ERPid, Config), + + ct_test_support:log_events(Name, + reformat(Events, ?eh), + ?config(priv_dir, Config), + Opts), + TestEvents = events_to_check(Testcase), + R = ct_test_support:verify_events(TestEvents, Events, Config), + {R,Events}. + +reformat(Events, EH) -> + ct_test_support:reformat(Events, EH). + +events_to_check(Testcase) -> + OneTest = + [{?eh,start_logging,{'DEF','RUNDIR'}}] ++ + [{?eh,tc_done,{?suite,Testcase,ok}}] ++ + [{?eh,stop_logging,[]}], + + %% 2 tests (ct:run_test + script_start) is default + OneTest ++ OneTest. + +check_cover(Config) when is_list(Config) -> + CTNode = proplists:get_value(ct_node, Config), + check_cover(CTNode); +check_cover(Node) when is_atom(Node) -> + case rpc:call(Node,test_server,is_cover,[]) of + true -> + {true, + rpc:call(Node,cover,which_nodes,[]), + rpc:call(Node,cover,modules,[])}; + false -> + false + end. + +%% Check that each coverlog includes N calls to ?mod:foo/0 +check_calls(Events,N) -> + check_calls(Events,{?mod,foo,0},N). +check_calls(Events,MFA,N) -> + CoverLogs = + [filename:join(filename:dirname(TCLog),"all.coverdata") || + {ct_test_support_eh, + {event,tc_logfile,ct@falco, + {{?suite,init_per_suite},TCLog}}} <- Events], + do_check_logs(CoverLogs,MFA,N). + +do_check_logs([CoverLog|CoverLogs],{Mod,_,_} = MFA,N) -> + {ok,_} = cover:start(), + ok = cover:import(CoverLog), + {ok,Calls} = cover:analyse(Mod,calls,function), + ok = cover:stop(), + {MFA,N} = lists:keyfind(MFA,1,Calls), + do_check_logs(CoverLogs,MFA,N); +do_check_logs([],_,_) -> + ok. + +fullname(Name) -> + {ok,Host} = inet:gethostname(), + list_to_atom(atom_to_list(Name) ++ "@" ++ Host). + +default_cover_file_content() -> + [{incl_mods,[?mod]}]. + +create_default_cover_file(Filename,Config) -> + create_cover_file(Filename,default_cover_file_content(),Config). + +create_cover_file(Filename,Terms,Config) -> + PrivDir = ?config(priv_dir,Config), + File = filename:join(PrivDir,Filename) ++ ".cover", + {ok,Fd} = file:open(File,[write]), + lists:foreach(fun(Term) -> + file:write(Fd,io_lib:format("~p.~n",[Term])) + end,Terms), + ok = file:close(Fd), + File. diff --git a/lib/common_test/test/ct_cover_SUITE_data/cover_SUITE.erl b/lib/common_test/test/ct_cover_SUITE_data/cover_SUITE.erl new file mode 100644 index 0000000000..fdc3323f0a --- /dev/null +++ b/lib/common_test/test/ct_cover_SUITE_data/cover_SUITE.erl @@ -0,0 +1,156 @@ +%%-------------------------------------------------------------------- +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2012. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% +%% +%%---------------------------------------------------------------------- +%% File: cover_SUITE.erl +%% +%% Description: +%% This file contains the test cases for the code coverage support +%% +%% @author Support +%% @doc Test of code coverage support in common_test +%% @end +%%---------------------------------------------------------------------- +%%---------------------------------------------------------------------- +-module(cover_SUITE). +-include_lib("common_test/include/ct.hrl"). + +-compile(export_all). + +%% Default timetrap timeout (set in init_per_testcase). +-define(default_timeout, ?t:minutes(1)). + +suite() -> + []. + +all() -> + []. + +init_per_suite(Config) -> + Config. + +end_per_suite(Config) -> + Config. + +init_per_testcase(_Case, Config) -> + Dog = test_server:timetrap(?default_timeout), + [{watchdog, Dog}|Config]. + +end_per_testcase(Case, Config) -> + %% try apply(?MODULE,Case,[cleanup,Config]) + %% catch error:undef -> ok + %% end, + + kill_slaves(Case,nodes()), + Dog=?config(watchdog, Config), + test_server:timetrap_cancel(Dog), + ok. + +%%%----------------------------------------------------------------- +%%% Test cases +break(_Config) -> + test_server:break(""), + ok. + +default(Config) -> + cover_compiled = code:which(cover_test_mod), + cover_test_mod:foo(), + ok. + +slave(Config) -> + cover_compiled = code:which(cover_test_mod), + cover_test_mod:foo(), + N1 = nodename(slave,1), + {ok,Node} = ct_slave:start(N1), + cover_compiled = rpc:call(Node,code,which,[cover_test_mod]), + rpc:call(Node,cover_test_mod,foo,[]), + {ok,Node} = ct_slave:stop(N1), + ok. + +slave_start_slave(Config) -> + cover_compiled = code:which(cover_test_mod), + cover_test_mod:foo(), + N1 = nodename(slave_start_slave,1), + N2 = nodename(slave_start_slave,2), + {ok,Node} = ct_slave:start(N1), + cover_compiled = rpc:call(Node,code,which,[cover_test_mod]), + rpc:call(Node,cover_test_mod,foo,[]), + {ok,Node2} = rpc:call(Node,ct_slave,start,[N2]), + rpc:call(Node2,cover_test_mod,foo,[]), + {ok,Node2} = rpc:call(Node,ct_slave,stop,[N2]), + {ok,Node} = ct_slave:stop(N1), + ok. + +cover_node_option(Config) -> + cover_compiled = code:which(cover_test_mod), + cover_test_mod:foo(), + Node = fullname(existing_node), + cover_compiled = rpc:call(Node,code,which,[cover_test_mod]), + rpc:call(Node,cover_test_mod,foo,[]), + ok. + +ct_cover_add_remove_nodes(Config) -> + cover_compiled = code:which(cover_test_mod), + cover_test_mod:foo(), + Node = fullname(existing_node), + Beam = rpc:call(Node,code,which,[cover_test_mod]), + false = (Beam == cover_compiled), + + rpc:call(Node,cover_test_mod,foo,[]), % should not be collected + {ok,[Node]} = ct_cover:add_nodes([Node]), + cover_compiled = rpc:call(Node,code,which,[cover_test_mod]), + rpc:call(Node,cover_test_mod,foo,[]), % should be collected + ok = ct_cover:remove_nodes([Node]), + rpc:call(Node,cover_test_mod,foo,[]), % should not be collected + + Beam = rpc:call(Node,code,which,[cover_test_mod]), + + ok. + +otp_9956(Config) -> + cover_compiled = code:which(?MODULE), + DataDir = ?config(data_dir,Config), + absolute = filename:pathtype(DataDir), + true = filelib:is_dir(DataDir), + ok. + + +%%%----------------------------------------------------------------- +%%% Internal +nodename(Case,N) -> + list_to_atom(nodeprefix(Case) ++ integer_to_list(N)). + +nodeprefix(Case) -> + atom_to_list(?MODULE) ++ "_" ++ atom_to_list(Case) ++ "_node". + + +fullname(Name) -> + {ok,Host} = inet:gethostname(), + list_to_atom(atom_to_list(Name) ++ "@" ++ Host). + +kill_slaves(Case, [Node|Nodes]) -> + Prefix = nodeprefix(Case), + case lists:prefix(Prefix,atom_to_list(Node)) of + true -> + rpc:call(Node,erlang,halt,[]); + _ -> + ok + end, + kill_slaves(Case,Nodes); +kill_slaves(_,[]) -> + ok. diff --git a/lib/common_test/test/ct_cover_SUITE_data/cover_SUITE_data/.gitignore b/lib/common_test/test/ct_cover_SUITE_data/cover_SUITE_data/.gitignore new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/lib/common_test/test/ct_cover_SUITE_data/cover_SUITE_data/.gitignore diff --git a/lib/common_test/test/ct_cover_SUITE_data/cover_test_mod.erl b/lib/common_test/test/ct_cover_SUITE_data/cover_test_mod.erl new file mode 100644 index 0000000000..d4f69452c3 --- /dev/null +++ b/lib/common_test/test/ct_cover_SUITE_data/cover_test_mod.erl @@ -0,0 +1,4 @@ +-module(cover_test_mod). +-compile(export_all). +foo() -> + ok. diff --git a/lib/common_test/test/ct_error_SUITE.erl b/lib/common_test/test/ct_error_SUITE.erl index 338e76264e..6d90b29f41 100644 --- a/lib/common_test/test/ct_error_SUITE.erl +++ b/lib/common_test/test/ct_error_SUITE.erl @@ -61,7 +61,7 @@ suite() -> [{ct_hooks,[ts_install_cth]}]. all() -> [cfg_error, lib_error, no_compile, timetrap_end_conf, timetrap_normal, timetrap_extended, timetrap_parallel, - timetrap_fun, misc_errors]. + timetrap_fun, timetrap_fun_group, misc_errors]. groups() -> []. @@ -251,6 +251,24 @@ timetrap_fun(Config) when is_list(Config) -> %%%----------------------------------------------------------------- %%% +timetrap_fun_group(Config) when is_list(Config) -> + DataDir = ?config(data_dir, Config), + Join = fun(D, S) -> filename:join(D, "error/test/"++S) end, + Suites = [Join(DataDir, "timetrap_8_SUITE")], + {Opts,ERPid} = setup([{suite,Suites}], Config), + ok = ct_test_support:run(Opts, Config), + Events = ct_test_support:get_events(ERPid, Config), + + ct_test_support:log_events(timetrap_fun_group, + reformat(Events, ?eh), + ?config(priv_dir, Config), + Opts), + + TestEvents = events_to_check(timetrap_fun_group), + ok = ct_test_support:verify_events(TestEvents, Events, Config). + +%%%----------------------------------------------------------------- +%%% misc_errors(Config) when is_list(Config) -> DataDir = ?config(data_dir, Config), Join = fun(D, S) -> filename:join(D, "error/test/"++S) end, @@ -429,8 +447,7 @@ test_events(cfg_error) -> {'EXIT',{init_per_group_fails,g1}}}}}}], [{?eh,tc_start,{cfg_error_8_SUITE,{init_per_group,g2,[]}}}, - {?eh,tc_done,{cfg_error_8_SUITE, - {init_per_group,unknown,[]}, + {?eh,tc_done,{cfg_error_8_SUITE,{init_per_group,g2,[]}, {failed,{timetrap_timeout,2000}}}}, {?eh,tc_auto_skip,{cfg_error_8_SUITE,tc1, {failed,{cfg_error_8_SUITE,init_per_group, @@ -500,7 +517,7 @@ test_events(cfg_error) -> {?eh,tc_done,{cfg_error_8_SUITE,tc1,ok}}, {?eh,test_stats,{9,0,{0,14}}}, {?eh,tc_start,{cfg_error_8_SUITE,{end_per_group,g12,[]}}}, - {?eh,tc_done,{cfg_error_8_SUITE,{end_per_group,unknown,[]}, + {?eh,tc_done,{cfg_error_8_SUITE,{end_per_group,g12,[]}, {failed,{timetrap_timeout,2000}}}}], {?eh,tc_start,{cfg_error_8_SUITE,end_per_suite}}, @@ -971,11 +988,423 @@ test_events(timetrap_fun) -> {?eh,stop_logging,[]} ]; +test_events(timetrap_fun_group) -> + [ + {?eh,start_logging,{'DEF','RUNDIR'}}, + {?eh,test_start,{'DEF',{'START_TIME','LOGDIR'}}}, + {?eh,start_info,{1,1,58}}, + {?eh,tc_start,{timetrap_8_SUITE,init_per_suite}}, + {?eh,tc_done,{timetrap_8_SUITE,init_per_suite,ok}}, + + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,g0,[]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,g0,[]},ok}}, + {?eh,tc_start,{timetrap_8_SUITE,tc0}}, + {?eh,tc_done,{timetrap_8_SUITE,tc0, + {failed,{timetrap_timeout,{'$approx',1000}}}}}, + {?eh,test_stats,{0,1,{0,0}}}, + {?eh,tc_start,{timetrap_8_SUITE,tc2}}, + {?eh,tc_done,{timetrap_8_SUITE,tc2, + {failed,{timetrap_timeout,{'$approx',500}}}}}, + {?eh,test_stats,{0,2,{0,0}}}, + {?eh,tc_start,{timetrap_8_SUITE,{end_per_group,g0,[]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{end_per_group,g0,[]},ok}}], + + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,g1,[]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,g1,[]},ok}}, + {?eh,tc_start,{timetrap_8_SUITE,tc0}}, + {?eh,tc_done,{timetrap_8_SUITE,tc0, + {failed,{timetrap_timeout,{'$approx',1000}}}}}, + {?eh,test_stats,{0,3,{0,0}}}, + {?eh,tc_start,{timetrap_8_SUITE,tc2}}, + {?eh,tc_done,{timetrap_8_SUITE,tc2, + {failed,{timetrap_timeout,{'$approx',500}}}}}, + {?eh,test_stats,{0,4,{0,0}}}, + {?eh,tc_start,{timetrap_8_SUITE,{end_per_group,g1,[]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{end_per_group,g1,[]},ok}}], + + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,g2,[]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,g2,[]},ok}}, + {?eh,tc_start,{timetrap_8_SUITE,tc1}}, + {?eh,tc_done,{timetrap_8_SUITE,tc1, + {failed,{timetrap_timeout,{'$approx',1000}}}}}, + {?eh,test_stats,{0,5,{0,0}}}, + {?eh,tc_start,{timetrap_8_SUITE,tc2}}, + {?eh,tc_done,{timetrap_8_SUITE,tc2, + {failed,{timetrap_timeout,{'$approx',500}}}}}, + {?eh,test_stats,{0,6,{0,0}}}, + {?eh,tc_start,{timetrap_8_SUITE,{end_per_group,g2,[]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{end_per_group,g2,[]},ok}}], + + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,g3,[]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,g3,[]},ok}}, + {?eh,tc_start,{timetrap_8_SUITE,tc4}}, + {?eh,tc_done,{timetrap_8_SUITE,tc4, + {failed,{timetrap_timeout,{'$approx',2000}}}}}, + {?eh,test_stats,{0,7,{0,0}}}, + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,g1,[]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,g1,[]},ok}}, + {?eh,tc_start,{timetrap_8_SUITE,tc0}}, + {?eh,tc_done,{timetrap_8_SUITE,tc0, + {failed,{timetrap_timeout,{'$approx',1000}}}}}, + {?eh,test_stats,{0,8,{0,0}}}, + {?eh,tc_start,{timetrap_8_SUITE,tc2}}, + {?eh,tc_done,{timetrap_8_SUITE,tc2, + {failed,{timetrap_timeout,{'$approx',500}}}}}, + {?eh,test_stats,{0,9,{0,0}}}, + {?eh,tc_start,{timetrap_8_SUITE,{end_per_group,g1,[]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{end_per_group,g1,[]},ok}}], + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,g2,[]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,g2,[]},ok}}, + {?eh,tc_start,{timetrap_8_SUITE,tc1}}, + {?eh,tc_done,{timetrap_8_SUITE,tc1, + {failed,{timetrap_timeout,{'$approx',1000}}}}}, + {?eh,test_stats,{0,10,{0,0}}}, + {?eh,tc_start,{timetrap_8_SUITE,tc2}}, + {?eh,tc_done,{timetrap_8_SUITE,tc2, + {failed,{timetrap_timeout,{'$approx',500}}}}}, + {?eh,test_stats,{0,11,{0,0}}}, + {?eh,tc_start,{timetrap_8_SUITE,{end_per_group,g2,[]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{end_per_group,g2,[]},ok}}], + {?eh,tc_start,{timetrap_8_SUITE,{end_per_group,g3,[]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{end_per_group,g3,[]},ok}}], + + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,g4,[]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,g4,[]}, + {user_timetrap_error,{kaboom,'_'}}}}, + {?eh,tc_auto_skip,{timetrap_8_SUITE,tc0, + {failed,{timetrap_8_SUITE,init_per_group, + {user_timetrap_error,{kaboom,'_'}}}}}}, + {?eh,test_stats,{0,11,{0,1}}}, + {?eh,tc_auto_skip,{timetrap_8_SUITE,tc2, + {failed,{timetrap_8_SUITE,init_per_group, + {user_timetrap_error,{kaboom,'_'}}}}}}, + {?eh,test_stats,{0,11,{0,2}}}, + {?eh,tc_auto_skip,{timetrap_8_SUITE,end_per_group, + {failed,{timetrap_8_SUITE,init_per_group, + {user_timetrap_error,{kaboom,'_'}}}}}}], + + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,g5,[]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,g5,[]}, + {user_timetrap_error,{kaboom,'_'}}}}, + {?eh,tc_auto_skip,{timetrap_8_SUITE,tc0, + {failed,{timetrap_8_SUITE,init_per_group, + {user_timetrap_error,{kaboom,'_'}}}}}}, + {?eh,test_stats,{0,11,{0,3}}}, + {?eh,tc_auto_skip,{timetrap_8_SUITE,tc2, + {failed,{timetrap_8_SUITE,init_per_group, + {user_timetrap_error,{kaboom,'_'}}}}}}, + {?eh,test_stats,{0,11,{0,4}}}, + {?eh,tc_auto_skip,{timetrap_8_SUITE,end_per_group, + {failed,{timetrap_8_SUITE,init_per_group, + {user_timetrap_error,{kaboom,'_'}}}}}}], + + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,g6,[]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,g6,[]}, + {failed,{timetrap_timeout,{'$approx',500}}}}}, + {?eh,tc_auto_skip,{timetrap_8_SUITE,tc0, + {failed,{timetrap_8_SUITE,init_per_group, + {timetrap_timeout,'_'}}}}}, + {?eh,test_stats,{0,11,{0,5}}}, + {?eh,tc_auto_skip,{timetrap_8_SUITE,tc2, + {failed,{timetrap_8_SUITE,init_per_group, + {timetrap_timeout,'_'}}}}}, + {?eh,test_stats,{0,11,{0,6}}}, + {?eh,tc_auto_skip,{timetrap_8_SUITE,end_per_group, + {failed,{timetrap_8_SUITE,init_per_group, + {timetrap_timeout,'_'}}}}}], + + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,g7,[]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,g7,[]},ok}}, + {?eh,tc_start,{timetrap_8_SUITE,tc5}}, + {?eh,tc_done,{timetrap_8_SUITE,tc5,ok}}, + {?eh,test_stats,{1,11,{0,6}}}, + {?eh,tc_start,{timetrap_8_SUITE,{end_per_group,g7,[]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{end_per_group,g7,[]}, + {user_timetrap_error,{kaboom,'_'}}}}], + + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,g8,[]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,g8,[]},ok}}, + {?eh,tc_start,{timetrap_8_SUITE,tc5}}, + {?eh,tc_done,{timetrap_8_SUITE,tc5,ok}}, + {?eh,test_stats,{2,11,{0,6}}}, + {?eh,tc_start,{timetrap_8_SUITE,{end_per_group,g8,[]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{end_per_group,g8,[]}, + {failed,{timetrap_timeout,{'$approx',500}}}}}], + + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,g9,[]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,g9,[]},ok}}, + {?eh,tc_start,{timetrap_8_SUITE,tc5}}, + {?eh,tc_done,{timetrap_8_SUITE,tc5,ok}}, + {?eh,test_stats,{3,11,{0,6}}}, + {?eh,tc_start,{timetrap_8_SUITE,tc0}}, + {?eh,tc_done,{timetrap_8_SUITE,tc0, + {user_timetrap_error,{kaboom,'_'}}}}, + {?eh,test_stats,{3,12,{0,6}}}, + {?eh,tc_start,{timetrap_8_SUITE,{end_per_group,g9,[]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{end_per_group,g9,[]},ok}}], + + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,g10,[]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,g10,[]},ok}}, + {?eh,tc_start,{timetrap_8_SUITE,tc0}}, + {?eh,tc_done,{timetrap_8_SUITE,tc0, + {user_timetrap_error,{kaboom,'_'}}}}, + {?eh,test_stats,{3,13,{0,6}}}, + {?eh,tc_start,{timetrap_8_SUITE,tc5}}, + {?eh,tc_done,{timetrap_8_SUITE,tc5,ok}}, + {?eh,test_stats,{4,13,{0,6}}}, + {?eh,tc_start,{timetrap_8_SUITE,{end_per_group,g10,[]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{end_per_group,g10,[]},ok}}], + + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,g11,[]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,g11,[]},ok}}, + {?eh,tc_start,{timetrap_8_SUITE,tc3}}, + {?eh,tc_done,{timetrap_8_SUITE,tc3, + {failed,{timetrap_timeout,{'$approx',4000}}}}}, + {?eh,test_stats,{4,14,{0,6}}}, + {?eh,tc_start,{timetrap_8_SUITE,tc2}}, + {?eh,tc_done,{timetrap_8_SUITE,tc2, + {failed,{timetrap_timeout,{'$approx',500}}}}}, + {?eh,test_stats,{4,15,{0,6}}}, + {?eh,tc_start,{timetrap_8_SUITE,{end_per_group,g11,[]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{end_per_group,g11,[]},ok}}], + + {parallel, + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,pg0,[parallel]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,pg0,[parallel]},ok}}, + {?eh,tc_start,{timetrap_8_SUITE,tc0}}, + {?eh,tc_done,{timetrap_8_SUITE,tc0, + {failed,{timetrap_timeout,{'$approx',1000}}}}}, + {?eh,test_stats,{4,16,{0,6}}}, + {?eh,tc_start,{timetrap_8_SUITE,tc2}}, + {?eh,tc_done,{timetrap_8_SUITE,tc2, + {failed,{timetrap_timeout,{'$approx',500}}}}}, + {?eh,test_stats,{4,17,{0,6}}}, + {?eh,tc_start,{timetrap_8_SUITE,{end_per_group,pg0,[parallel]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{end_per_group,pg0,[parallel]},ok}}]}, + + {parallel, + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,pg1,[parallel]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,pg1,[parallel]},ok}}, + {?eh,tc_start,{timetrap_8_SUITE,tc0}}, + {?eh,tc_done,{timetrap_8_SUITE,tc0, + {failed,{timetrap_timeout,{'$approx',1000}}}}}, + {?eh,test_stats,{4,18,{0,6}}}, + {?eh,tc_start,{timetrap_8_SUITE,tc2}}, + {?eh,tc_done,{timetrap_8_SUITE,tc2, + {failed,{timetrap_timeout,{'$approx',500}}}}}, + {?eh,test_stats,{4,19,{0,6}}}, + {?eh,tc_start,{timetrap_8_SUITE,{end_per_group,pg1,[parallel]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{end_per_group,pg1,[parallel]},ok}}]}, + + {parallel, + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,pg2,[parallel]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,pg2,[parallel]},ok}}, + {?eh,tc_start,{timetrap_8_SUITE,tc1}}, + {?eh,tc_done,{timetrap_8_SUITE,tc1, + {failed,{timetrap_timeout,{'$approx',1000}}}}}, + {?eh,test_stats,{4,20,{0,6}}}, + {?eh,tc_start,{timetrap_8_SUITE,tc2}}, + {?eh,tc_done,{timetrap_8_SUITE,tc2, + {failed,{timetrap_timeout,{'$approx',500}}}}}, + {?eh,test_stats,{4,21,{0,6}}}, + {?eh,tc_start,{timetrap_8_SUITE,{end_per_group,pg2,[parallel]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{end_per_group,pg2,[parallel]},ok}}]}, + + {parallel, + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,pg3,[parallel]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,pg3,[parallel]},ok}}, + {?eh,tc_start,{timetrap_8_SUITE,tc4}}, + {?eh,tc_done,{timetrap_8_SUITE,tc4, + {failed,{timetrap_timeout,{'$approx',2000}}}}}, + {?eh,test_stats,{4,22,{0,6}}}, + {parallel, + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,pg1,[parallel]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,pg1,[parallel]}, + ok}}, + {?eh,tc_start,{timetrap_8_SUITE,tc0}}, + {?eh,tc_done,{timetrap_8_SUITE,tc0, + {failed,{timetrap_timeout,{'$approx',1000}}}}}, + {?eh,test_stats,{4,23,{0,6}}}, + {?eh,tc_start,{timetrap_8_SUITE,tc2}}, + {?eh,tc_done,{timetrap_8_SUITE,tc2, + {failed,{timetrap_timeout,{'$approx',500}}}}}, + {?eh,test_stats,{4,24,{0,6}}}, + {?eh,tc_start,{timetrap_8_SUITE,{end_per_group,pg1,[parallel]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{end_per_group,pg1,[parallel]}, + ok}}]}, + {parallel, + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,pg2,[parallel]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,pg2,[parallel]}, + ok}}, + {?eh,tc_start,{timetrap_8_SUITE,tc1}}, + {?eh,tc_done,{timetrap_8_SUITE,tc1, + {failed,{timetrap_timeout,{'$approx',1000}}}}}, + {?eh,test_stats,{4,25,{0,6}}}, + {?eh,tc_start,{timetrap_8_SUITE,tc2}}, + {?eh,tc_done,{timetrap_8_SUITE,tc2, + {failed,{timetrap_timeout,{'$approx',500}}}}}, + {?eh,test_stats,{4,26,{0,6}}}, + {?eh,tc_start,{timetrap_8_SUITE,{end_per_group,pg2,[parallel]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{end_per_group,pg2,[parallel]}, + ok}}]}, + {?eh,tc_start,{timetrap_8_SUITE,{end_per_group,pg3,[parallel]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{end_per_group,pg3,[parallel]},ok}}]}, + + {parallel, + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,pg4,[parallel]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,pg4,[parallel]}, + {user_timetrap_error,{kaboom,'_'}}}}, + {?eh,tc_auto_skip,{timetrap_8_SUITE,tc0, + {failed,{timetrap_8_SUITE,init_per_group, + {user_timetrap_error,{kaboom,'_'}}}}}}, + {?eh,test_stats,{4,26,{0,7}}}, + {?eh,tc_auto_skip,{timetrap_8_SUITE,tc2, + {failed,{timetrap_8_SUITE,init_per_group, + {user_timetrap_error,{kaboom,'_'}}}}}}, + {?eh,test_stats,{4,26,{0,8}}}, + {?eh,tc_auto_skip,{timetrap_8_SUITE,end_per_group, + {failed,{timetrap_8_SUITE,init_per_group, + {user_timetrap_error,{kaboom,'_'}}}}}}]}, + + {parallel, + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,pg5,[parallel]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,pg5,[parallel]}, + {user_timetrap_error,{kaboom,'_'}}}}, + {?eh,tc_auto_skip,{timetrap_8_SUITE,tc0, + {failed,{timetrap_8_SUITE,init_per_group, + {user_timetrap_error,{kaboom,'_'}}}}}}, + {?eh,test_stats,{4,26,{0,9}}}, + {?eh,tc_auto_skip,{timetrap_8_SUITE,tc2, + {failed,{timetrap_8_SUITE,init_per_group, + {user_timetrap_error,{kaboom,'_'}}}}}}, + {?eh,test_stats,{4,26,{0,10}}}, + {?eh,tc_auto_skip,{timetrap_8_SUITE,end_per_group, + {failed,{timetrap_8_SUITE,init_per_group, + {user_timetrap_error,{kaboom,'_'}}}}}}]}, + + {parallel, + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,pg6,[parallel]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,pg6,[parallel]}, + {failed,{timetrap_timeout,{'$approx',500}}}}}, + {?eh,tc_auto_skip,{timetrap_8_SUITE,tc0, + {failed,{timetrap_8_SUITE,init_per_group, + {timetrap_timeout,'_'}}}}}, + {?eh,test_stats,{4,26,{0,11}}}, + {?eh,tc_auto_skip,{timetrap_8_SUITE,tc2, + {failed,{timetrap_8_SUITE,init_per_group, + {timetrap_timeout,'_'}}}}}, + {?eh,test_stats,{4,26,{0,12}}}, + {?eh,tc_auto_skip,{timetrap_8_SUITE,end_per_group, + {failed,{timetrap_8_SUITE,init_per_group, + {timetrap_timeout,'_'}}}}}]}, + + {parallel, + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,pg7,[parallel]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,pg7,[parallel]},ok}}, + {?eh,tc_start,{timetrap_8_SUITE,tc5}}, + {?eh,tc_done,{timetrap_8_SUITE,tc5,ok}}, + {?eh,test_stats,{5,26,{0,12}}}, + {?eh,tc_start,{timetrap_8_SUITE,{end_per_group,pg7,[parallel]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{end_per_group,pg7,[parallel]}, + {user_timetrap_error,{kaboom,'_'}}}}]}, + + {parallel, + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,pg8,[parallel]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,pg8,[parallel]},ok}}, + {?eh,tc_start,{timetrap_8_SUITE,tc5}}, + {?eh,tc_done,{timetrap_8_SUITE,tc5,ok}}, + {?eh,test_stats,{6,26,{0,12}}}, + {?eh,tc_start,{timetrap_8_SUITE,{end_per_group,pg8,[parallel]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{end_per_group,pg8,[parallel]}, + {failed,{timetrap_timeout,{'$approx',500}}}}}]}, + + {parallel, + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,pg9,[parallel]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,pg9,[parallel]},ok}}, + {?eh,tc_start,{timetrap_8_SUITE,tc5}}, + {?eh,tc_done,{timetrap_8_SUITE,tc5,ok}}, + {?eh,tc_start,{timetrap_8_SUITE,tc0}}, + {?eh,tc_done,{timetrap_8_SUITE,tc0, + {user_timetrap_error,{kaboom,'_'}}}}, + %% Due to parallelism only checking final test stat in group + {?eh,test_stats,{7,27,{0,12}}}, + {?eh,tc_start,{timetrap_8_SUITE,{end_per_group,pg9,[parallel]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{end_per_group,pg9,[parallel]},ok}}]}, + + {parallel, + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,pg10,[parallel]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,pg10,[parallel]},ok}}, + {?eh,tc_start,{timetrap_8_SUITE,tc0}}, + {?eh,tc_done,{timetrap_8_SUITE,tc0, + {user_timetrap_error,{kaboom,'_'}}}}, + {?eh,tc_start,{timetrap_8_SUITE,tc5}}, + {?eh,tc_done,{timetrap_8_SUITE,tc5,ok}}, + %% Due to parallelism only checking final test stat in group + {?eh,test_stats,{8,28,{0,12}}}, + {?eh,tc_start,{timetrap_8_SUITE,{end_per_group,pg10,[parallel]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{end_per_group,pg10,[parallel]},ok}}]}, + + {parallel, + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,pg11,[parallel]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,pg11,[parallel]},ok}}, + {?eh,tc_start,{timetrap_8_SUITE,tc3}}, + {?eh,tc_done,{timetrap_8_SUITE,tc3, + {failed,{timetrap_timeout,{'$approx',4000}}}}}, + {?eh,test_stats,{8,29,{0,12}}}, + {?eh,tc_start,{timetrap_8_SUITE,tc2}}, + {?eh,tc_done,{timetrap_8_SUITE,tc2, + {failed,{timetrap_timeout,{'$approx',500}}}}}, + {?eh,test_stats,{8,30,{0,12}}}, + {?eh,tc_start,{timetrap_8_SUITE,{end_per_group,pg11,[parallel]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{end_per_group,pg11,[parallel]},ok}}]}, + + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,sg1,[sequence]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,sg1,[sequence]},ok}}, + {?eh,tc_start,{timetrap_8_SUITE,tc5}}, + {?eh,tc_done,{timetrap_8_SUITE,tc5,ok}}, + {?eh,test_stats,{9,30,{0,12}}}, + {?eh,tc_start,{timetrap_8_SUITE,tc0}}, + {?eh,tc_done,{timetrap_8_SUITE,tc0, + {user_timetrap_error,{kaboom,'_'}}}}, + {?eh,test_stats,{9,31,{0,12}}}, + {?eh,tc_auto_skip,{timetrap_8_SUITE,tc1, + {failed,{timetrap_8_SUITE,tc0}}}}, + {?eh,test_stats,{9,31,{0,13}}}, + {?eh,tc_auto_skip,{timetrap_8_SUITE,tc2, + {failed,{timetrap_8_SUITE,tc0}}}}, + {?eh,test_stats,{9,31,{0,14}}}, + {?eh,tc_start,{timetrap_8_SUITE,{end_per_group,sg1,[sequence]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{end_per_group,sg1,[sequence]},ok}}], + + [{?eh,tc_start,{timetrap_8_SUITE,{init_per_group,sg2,[sequence]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{init_per_group,sg2,[sequence]},ok}}, + {?eh,tc_start,{timetrap_8_SUITE,tc5}}, + {?eh,tc_done,{timetrap_8_SUITE,tc5,ok}}, + {?eh,test_stats,{10,31,{0,14}}}, + {?eh,tc_start,{timetrap_8_SUITE,tc0}}, + {?eh,tc_done,{timetrap_8_SUITE,tc0, + {failed,{timetrap_timeout,{'$approx',1000}}}}}, + {?eh,test_stats,{10,32,{0,14}}}, + {?eh,tc_auto_skip,{timetrap_8_SUITE,tc1, + {failed,{timetrap_8_SUITE,tc0}}}}, + {?eh,test_stats,{10,32,{0,15}}}, + {?eh,tc_auto_skip,{timetrap_8_SUITE,tc2, + {failed,{timetrap_8_SUITE,tc0}}}}, + {?eh,test_stats,{10,32,{0,16}}}, + {?eh,tc_start,{timetrap_8_SUITE,{end_per_group,sg2,[sequence]}}}, + {?eh,tc_done,{timetrap_8_SUITE,{end_per_group,sg2,[sequence]},ok}}], + + {?eh,tc_start,{timetrap_8_SUITE,end_per_suite}}, + {?eh,tc_done,{timetrap_8_SUITE,end_per_suite,ok}}, + {?eh,test_done,{'DEF','STOP_TIME'}}, + {?eh,stop_logging,[]} + ]; + test_events(misc_errors) -> [ {?eh,start_logging,{'DEF','RUNDIR'}}, {?eh,test_start,{'DEF',{'START_TIME','LOGDIR'}}}, - {?eh,start_info,{1,1,7}}, + {?eh,start_info,{1,1,9}}, {?eh,tc_start,{misc_error_1_SUITE,ct_fail_1}}, {?eh,tc_done,{misc_error_1_SUITE,ct_fail_1, {failed,{error,{test_case_failed,{error,this_is_expected}}}}}}, @@ -1002,7 +1431,12 @@ test_events(misc_errors) -> {?eh,tc_start,{misc_error_1_SUITE,killed_by_signal_2}}, {?eh,tc_done,{misc_error_1_SUITE,killed_by_signal_2, {failed,testcase_aborted_or_killed}}}, - {?eh,test_stats,{0,7,{0,0}}}, + {parallel, + [{?eh,tc_start,{misc_error_1_SUITE,p1}}, + {?eh,tc_done,{misc_error_1_SUITE,p1,ok}}, + {?eh,tc_start,{misc_error_1_SUITE,p2}}, + {?eh,tc_done,{misc_error_1_SUITE,p2,ok}}]}, + {?eh,test_stats,{2,7,{0,0}}}, {?eh,test_done,{'DEF','STOP_TIME'}}, {?eh,stop_logging,[]} ]. diff --git a/lib/common_test/test/ct_error_SUITE_data/error/test/misc_error_1_SUITE.erl b/lib/common_test/test/ct_error_SUITE_data/error/test/misc_error_1_SUITE.erl index 99c3ed05ec..61f3fa7e59 100644 --- a/lib/common_test/test/ct_error_SUITE_data/error/test/misc_error_1_SUITE.erl +++ b/lib/common_test/test/ct_error_SUITE_data/error/test/misc_error_1_SUITE.erl @@ -96,7 +96,7 @@ end_per_testcase(_TestCase, _Config) -> %% N = integer() | forever %%-------------------------------------------------------------------- groups() -> - []. + [{p,[parallel],[p1,p2]}]. %%-------------------------------------------------------------------- %% Function: all() -> GroupsAndTestCases | {skip,Reason} @@ -107,7 +107,8 @@ groups() -> %%-------------------------------------------------------------------- all() -> [ct_fail_1, ct_fail_2, ct_fail_3, ts_fail_1, ts_fail_2, - killed_by_signal_1, killed_by_signal_2]. + killed_by_signal_1, killed_by_signal_2, + {group,p}]. ct_fail_1(_) -> ct:fail({error,this_is_expected}), @@ -152,3 +153,10 @@ killed_by_signal_2(_) -> end), ct:sleep(1000), exit(this_should_not_be_seen). + +p1(_) -> + {error,parallel_group} = ct:abort_current_testcase(aborted), + ok. + +p2(_) -> + receive after 1000 -> ok end. diff --git a/lib/common_test/test/ct_error_SUITE_data/error/test/timetrap_8_SUITE.erl b/lib/common_test/test/ct_error_SUITE_data/error/test/timetrap_8_SUITE.erl new file mode 100644 index 0000000000..ff138f38b5 --- /dev/null +++ b/lib/common_test/test/ct_error_SUITE_data/error/test/timetrap_8_SUITE.erl @@ -0,0 +1,258 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2012. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% +%% +-module(timetrap_8_SUITE). + +-compile(export_all). + +-include_lib("common_test/include/ct.hrl"). + +-define(TO, 4). + +%%-------------------------------------------------------------------- +%% Function: suite() -> Info +%% Info = [tuple()] +%%-------------------------------------------------------------------- +suite() -> + [{timetrap,{timetrap_utils,timetrap_val,[{seconds,?TO}]}}]. + +%%-------------------------------------------------------------------- +%% Function: init_per_suite(Config0) -> +%% Config1 | {skip,Reason} | {skip_and_save,Reason,Config1} +%% Config0 = Config1 = [tuple()] +%% Reason = term() +%%-------------------------------------------------------------------- +init_per_suite(Config) -> + Config. + +%%-------------------------------------------------------------------- +%% Function: end_per_suite(Config0) -> void() | {save_config,Config1} +%% Config0 = Config1 = [tuple()] +%%-------------------------------------------------------------------- +end_per_suite(_Config) -> + ok. + +%%-------------------------------------------------------------------- +%% Function: init_per_group(GroupName, Config0) -> +%% Config1 | {skip,Reason} | {skip_and_save,Reason,Config1} +%% GroupName = atom() +%% Config0 = Config1 = [tuple()] +%% Reason = term() +%%-------------------------------------------------------------------- +init_per_group(G6, Config) when G6==g6; G6==pg6 -> + ct:sleep({seconds,1}), + Config; +init_per_group(_GroupName, Config) -> + Config. + +%%-------------------------------------------------------------------- +%% Function: end_per_group(GroupName, Config0) -> +%% void() | {save_config,Config1} +%% GroupName = atom() +%% Config0 = Config1 = [tuple()] +%%-------------------------------------------------------------------- +end_per_group(G7or8, _Config) when G7or8==g7; G7or8==pg7; G7or8==g8; G7or8==pg8 -> + ct:sleep({seconds,5}), + ok; +end_per_group(_GroupName, _Config) -> + ok. + +%%-------------------------------------------------------------------- +%% Function: init_per_testcase(TestCase, Config0) -> +%% Config1 | {skip,Reason} | {skip_and_save,Reason,Config1} +%% TestCase = atom() +%% Config0 = Config1 = [tuple()] +%% Reason = term() +%%-------------------------------------------------------------------- +init_per_testcase(_, Config) -> + Config. + +%%-------------------------------------------------------------------- +%% Function: end_per_testcase(TestCase, Config0) -> +%% void() | {save_config,Config1} +%% TestCase = atom() +%% Config0 = Config1 = [tuple()] +%%-------------------------------------------------------------------- +end_per_testcase(_, _Config) -> + ok. + +%%-------------------------------------------------------------------- +%% Function: groups() -> [Group] +%% Group = {GroupName,Properties,GroupsAndTestCases} +%% GroupName = atom() +%% Properties = [parallel | sequence | Shuffle | {RepeatType,N}] +%% GroupsAndTestCases = [Group | {group,GroupName} | TestCase] +%% TestCase = atom() +%% Shuffle = shuffle | {shuffle,{integer(),integer(),integer()}} +%% RepeatType = repeat | repeat_until_all_ok | repeat_until_all_fail | +%% repeat_until_any_ok | repeat_until_any_fail +%% N = integer() | forever +%%-------------------------------------------------------------------- +groups() -> + [ + {g0,[],[tc0,tc2]}, % group override suite and tc overrides group + {g1,[],[tc0,tc2]}, % group override suite and tc overrides group + {g2,[],[tc1,tc2]}, % tc override group + {g3,[],[tc4,{group,g1},{group,g2}]}, % subgroup override group + {g4,[],[tc0,tc2]}, % exit during init_per_group + {g5,[],[tc0,tc2]}, % exit during init_per_group + {g6,[],[tc0,tc2]}, % timeout during init_per_group + {g7,[],[tc5]}, % exit during end_per_group + {g8,[],[tc5]}, % timeout during end_per_group + {g9,[],[tc5,tc0]}, % exit during testcase + {g10,[],[tc0,tc5]}, % exit during testcase + {g11,[],[tc3,tc2]}, % suite is valid if nothing else is specified + {pg0,[parallel],[tc0,tc2]}, % group override suite and tc overrides group + {pg1,[parallel],[tc0,tc2]}, % group override suite and tc overrides group + {pg2,[parallel],[tc1,tc2]}, % tc override group + {pg3,[parallel],[tc4,{group,pg1},{group,pg2}]}, % subgroup override group + {pg4,[parallel],[tc0,tc2]}, % exit during init_per_group + {pg5,[parallel],[tc0,tc2]}, % exit during init_per_group + {pg6,[parallel],[tc0,tc2]}, % timeout during init_per_group + {pg7,[parallel],[tc5]}, % exit during end_per_group + {pg8,[parallel],[tc5]}, % timeout during end_per_group + {pg9,[parallel],[tc5,tc0]}, % exit during testcase + {pg10,[parallel],[tc0,tc5]},% exit during testcase + {pg11,[parallel],[tc3,tc2]},% suite is valid if nothing else is specified + {sg1,[sequence],[tc5,tc0,tc1,tc2]}, % exit during sequencial testcase + {sg2,[sequence],[tc5,tc0,tc1,tc2]}].% timeout during sequencial testcase + +group(g0) -> + [{timetrap,{timetrap_utils,timetrap_val,[{seconds,1}]}}]; +group(g1) -> + [{timetrap,fun() -> timetrap_utils:timetrap_val(1000) end}]; +group(g2) -> + [{timetrap,fun() -> timetrap_utils:timetrap_val(3000) end}]; +group(g3) -> + [{timetrap,fun() -> timetrap_utils:timetrap_val(2000) end}]; +group(g4) -> + [{timetrap,{timetrap_utils,timetrap_exit,[kaboom]}}]; +group(g5) -> + [{timetrap,fun() -> exit(kaboom) end}]; +group(g6) -> + [{timetrap,{timetrap_utils,timetrap_val,[500]}}]; +group(g7) -> + [{timetrap,fun() -> ct:sleep(1000),exit(kaboom) end}]; +group(g8) -> + [{timetrap,{timetrap_utils,timetrap_val,[500]}}]; +group(g9) -> + [{timetrap,fun() -> ct:sleep(1000),exit(kaboom) end}]; +group(g10) -> + [{timetrap,fun() -> ct:sleep(1000),exit(kaboom) end}]; +group(g11) -> + []; +group(pg0) -> + [{timetrap,{timetrap_utils,timetrap_val,[{seconds,1}]}}]; +group(pg1) -> + [{timetrap,fun() -> timetrap_utils:timetrap_val(1000) end}]; +group(pg2) -> + [{timetrap,fun() -> timetrap_utils:timetrap_val(3000) end}]; +group(pg3) -> + [{timetrap,fun() -> timetrap_utils:timetrap_val(2000) end}]; +group(pg4) -> + [{timetrap,{timetrap_utils,timetrap_exit,[kaboom]}}]; +group(pg5) -> + [{timetrap,fun() -> exit(kaboom) end}]; +group(pg6) -> + [{timetrap,{timetrap_utils,timetrap_val,[500]}}]; +group(pg7) -> + [{timetrap,fun() -> ct:sleep(1000),exit(kaboom) end}]; +group(pg8) -> + [{timetrap,{timetrap_utils,timetrap_val,[500]}}]; +group(pg9) -> + [{timetrap,fun() -> ct:sleep(1000),exit(kaboom) end}]; +group(pg10) -> + [{timetrap,fun() -> ct:sleep(1000),exit(kaboom) end}]; +group(pg11) -> + []; +group(sg1) -> + [{timetrap,fun() -> ct:sleep(1000),exit(kaboom) end}]; +group(sg2) -> + [{timetrap,{timetrap_utils,timetrap_val,[{seconds,1}]}}]. + + +%%-------------------------------------------------------------------- +%% Function: all() -> GroupsAndTestCases | {skip,Reason} +%% GroupsAndTestCases = [{group,GroupName} | TestCase] +%% GroupName = atom() +%% TestCase = atom() +%% Reason = term() +%%-------------------------------------------------------------------- +all() -> + [ + {group,g0}, + {group,g1}, + {group,g2}, + {group,g3}, + {group,g4}, + {group,g5}, + {group,g6}, + {group,g7}, + {group,g8}, + {group,g9}, + {group,g10}, + {group,g11}, + {group,pg0}, + {group,pg1}, + {group,pg2}, + {group,pg3}, + {group,pg4}, + {group,pg5}, + {group,pg6}, + {group,pg7}, + {group,pg8}, + {group,pg9}, + {group,pg10}, + {group,pg11}, + {group,sg1}, + {group,sg2}]. + + + +tc0(_) -> + ct:comment("TO set by group"), + ct:sleep({seconds,5}), + ok. + +tc1() -> + [{timetrap,{timetrap_utils,timetrap_val,[1000]}}]. +tc1(_) -> + ct:comment("TO after 1 sec"), + ct:sleep({seconds,2}), + ok. + +tc2() -> + [{timetrap,fun() -> timetrap_utils:timetrap_val(500) end}]. +tc2(_) -> + ct:comment("TO after 0.5 sec"), + ct:sleep({seconds,2}), + ok. + +tc3(_) -> + ct:comment(io_lib:format("TO after ~w sec", [?TO])), + ct:sleep({seconds,5}), + ok. + +tc4(_) -> + ct:comment("TO set by group"), + ct:sleep({seconds,5}), + ok. + +tc5(_) -> + ct:comment("No TO in this testcase, maybe later"), + ok. diff --git a/lib/common_test/test/ct_groups_search_SUITE.erl b/lib/common_test/test/ct_groups_search_SUITE.erl new file mode 100644 index 0000000000..6b1c1f4634 --- /dev/null +++ b/lib/common_test/test/ct_groups_search_SUITE.erl @@ -0,0 +1,1245 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2009-2012. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% +%% + +%%%------------------------------------------------------------------- +%%% File: +%%% +%%% Description: +%%% +%%% +%%% The suites used for the test are located in the data directory. +%%% +%%% The group(s) and case(s) are specified according to this: +%%% +%%% Tests = ct_groups:find_groups(Mod, GroupPaths, TestCases, GroupDef) +%%% +%%% GroupPaths = GroupPath | [GroupPath] +%%% GroupPath = atom() | [atom()] +%%% +%%% CT will find all paths that include GroupPath. GroupPath can be a +%%% single group, or a list of groups along the path to TestCases. +%%% If GroupPath is the latter, the last group in the list must be +%%% the "terminating" group in the path, or it will be impossible to +%%% execute test cases in higher level groups *only*, as in this case: +%%% groups() -> [{g1,[],[tc1,{g2,[],[tc2]}]}]. +%%% Compare: find_groups(x, g1, all, groups()), and +%%% find_groups(x, [[g1]], all, groups()) +%%% +%%% Some examples: +%%% +%%% GroupPaths = g1, means find all paths with g1 included +%%% GroupPaths = [g1], -''- +%%% GroupPaths = [g1,g2], search twice - once for g1 and once for g2 +%%% GroupPaths = [[g1,g2]], find cases under group g1 and sub group g2 +%%% GroupPaths = [[g1,g2],[g1,g3]], find cases for g1-g2 AND g1-g3 +%%% +%%% TestCases = all | atom() | [atom()] +%%% +%%%------------------------------------------------------------------- + +-module(ct_groups_search_SUITE). + +-compile(export_all). + +-include_lib("common_test/include/ct.hrl"). +-include_lib("common_test/src/ct_util.hrl"). + + +-define(eh, ct_test_support_eh). + +-define(M1, groups_search_dummy_1_SUITE). +-define(M2, groups_search_dummy_2_SUITE). + +%%-------------------------------------------------------------------- +%% TEST SERVER CALLBACK FUNCTIONS +%%-------------------------------------------------------------------- + +init_per_suite(Config) -> + DataDir = proplists:get_value(data_dir, Config), + code:add_patha(DataDir), + M1Erl = filename:join(DataDir, atom_to_list(?M1)++".erl"), + M2Erl = filename:join(DataDir, atom_to_list(?M2)++".erl"), + {ok,?M1} = compile:file(M1Erl, [{outdir,DataDir}]), + {ok,?M2} = compile:file(M2Erl, [{outdir,DataDir}]), + {module,?M1} = code:load_file(?M1), + {module,?M2} = code:load_file(?M2), + + Config1 = ct_test_support:init_per_suite(Config), + Config1. + +end_per_suite(Config) -> + ct_test_support:end_per_suite(Config). + +init_per_testcase(TestCase, Config) -> + ct_test_support:init_per_testcase(TestCase, Config). + +end_per_testcase(TestCase, Config) -> + ct_test_support:end_per_testcase(TestCase, Config). + +suite() -> [{ct_hooks,[ts_install_cth]}]. + +groups() -> + [ + {find_groups,[],[all_groups, + testcases_in_all_groups, + all_in_top_group1, + all_in_top_group2, + all_in_sub_group1, + all_in_sub_group2, + testcase_in_top_group1, + testcase_in_top_group2, + testcase_in_sub_group1, + testcase_in_sub_group2, + testcase_in_top_groups1, + testcase_in_top_groups2, + testcase_in_top_groups3, + testcase_in_top_groups4, + testcase_in_top_groups5, + testcase_in_top_groups6, + testcase_in_top_groups7, + testcase_in_sub_groups1, + testcase_in_sub_groups2, + testcase_in_sub_groups3, + testcase_in_sub_groups4, + testcase_in_sub_groups5, + testcase_in_sub_groups6, + testcase_in_sub_groups7, + testcase_in_sub_groups8, + testcase_in_sub_groups9, + testcase_in_sub_groups10, + testcase_in_sub_groups11, + testcase_in_sub_groups12, + testcase_in_sub_groups13, + bad_testcase_in_sub_groups1]}, + + {run_groups,[sequence],[run_groups_with_options, + run_groups_with_testspec]} + ]. + +all() -> + [{group,find_groups,[parallel]}, + {group,run_groups}]. + + + +%%-------------------------------------------------------------------- +%% TEST CASES CHECKING RETURN VALUE ONLY +%%-------------------------------------------------------------------- + +all_groups(_) -> + GPath = all, TCs = all, + + Found = ct_groups:find_groups(?M1, GPath, TCs, groups1()), + + Top1 = ct_groups:find_groups(?M1, top1, TCs, groups1()), + Top2 = ct_groups:find_groups(?M1, top2, TCs, groups1()), + + All = Top1 ++ Top2 ++ [{conf,[{name,sub2}], + {?M1,init_per_group}, + [{?M1,sub2_tc1},{?M1,sub2_tc2}], + {?M1,end_per_group}}], + + All = Found, + + {?M1,GPath,TCs,Top1++Top2}. + +%%%----------------------------------------------------------------- +%%% +testcases_in_all_groups(_) -> + GPath = all, TCs = [tc3,sub_tc2], + + Found = ct_groups:find_groups(?M2, GPath, TCs, groups2()), + + [Top1 = + {conf,[{name,top1}],{?M2,init_per_group}, + [{?M2,tc3}, + {conf,[{name,sub11}], + {?M2,init_per_group},[{?M2,tc3},{?M2,sub_tc2}], + {?M2,end_per_group}}, + {conf,[{name,sub12}], + {?M2,init_per_group}, + [{?M2,tc3},{?M2,sub_tc2}, + {conf,[{name,sub121}], + {?M2,init_per_group},[{?M2,tc3},{?M2,sub_tc2}], + {?M2,end_per_group}}], + {?M2,end_per_group}}], + {?M2,end_per_group}}, + + Top2 = + {conf,[{name,top2}],{?M2,init_per_group}, + [{?M2,tc3}, + {conf,[{name,sub21}], + {?M2,init_per_group}, + [{?M2,tc3},{?M2,sub_tc2}, + {conf,[{name,sub2xx}], + {?M2,init_per_group},[{?M2,tc3},{?M2,sub_tc2}], + {?M2,end_per_group}}], + {?M2,end_per_group}}, + + {conf,[{name,sub22}], + {?M2,init_per_group}, + [{?M2,tc3},{?M2,sub_tc2}, + {conf,[{name,sub221}], + {?M2,init_per_group},[{?M2,tc3},{?M2,sub_tc2}], + {?M2,end_per_group}}, + {conf,[{name,sub2xx}], + {?M2,init_per_group},[{?M2,tc3},{?M2,sub_tc2}], + {?M2,end_per_group}}], + {?M2,end_per_group}}], + {?M2,end_per_group}}, + + {conf,[{name,sub21}], + {?M2,init_per_group}, + [{?M2,tc3},{?M2,sub_tc2}, + {conf,[{name,sub2xx}], + {?M2,init_per_group},[{?M2,tc3},{?M2,sub_tc2}],{?M2,end_per_group}}], + {?M2,end_per_group}}, + + {conf,[{name,sub22}], + {?M2,init_per_group}, + [{?M2,tc3},{?M2,sub_tc2}, + {conf,[{name,sub221}], + {?M2,init_per_group},[{?M2,tc3},{?M2,sub_tc2}],{?M2,end_per_group}}, + {conf,[{name,sub2xx}], + {?M2,init_per_group},[{?M2,tc3},{?M2,sub_tc2}],{?M2,end_per_group}}], + {?M2,end_per_group}}, + + {conf,[{name,sub221}], + {?M2,init_per_group},[{?M2,tc3},{?M2,sub_tc2}],{?M2,end_per_group}}, + + {conf,[{name,sub2xx}], + {?M2,init_per_group},[{?M2,tc3},{?M2,sub_tc2}],{?M2,end_per_group}}] + + = Found, + + {?M2,GPath,TCs,[Top1,Top2]}. + +%%%----------------------------------------------------------------- +%%% +all_in_top_group1(_) -> + GPath= top1, TCs = all, + + Found = ct_groups:find_groups(?M1, GPath, TCs, groups1()), + + [{conf,[{name,top1}], + {?M1,init_per_group}, + [{?M1,top1_tc1},{?M1,top1_tc2}, + {conf,[{name,sub1}], + {?M1,init_per_group}, + [{?M1,sub1_tc1},{?M1,sub1_tc2}], + {?M1,end_per_group}}], + {?M1,end_per_group}}] = Found, + + {?M1,GPath,TCs,Found}. + +%%%----------------------------------------------------------------- +%%% +all_in_top_group2(_) -> + GPath= top2, TCs = all, + + Found = ct_groups:find_groups(?M1, GPath, TCs, groups1()), + + [{conf,[{name,top2}], + {?M1,init_per_group}, + [{conf,[{name,sub2}], + {?M1,init_per_group}, + [{?M1,sub2_tc1},{?M1,sub2_tc2}], + {?M1,end_per_group}}, + {?M1,top2_tc1},{?M1,top2_tc2}], + {?M1,end_per_group}}] = Found, + + {?M1,GPath,TCs,Found}. + +%%%----------------------------------------------------------------- +%%% +all_in_sub_group1(_) -> + GPath = sub1, TCs = all, + + Found = ct_groups:find_groups(?M1, GPath, TCs, groups1()), + + [{conf,[{name,top1}], + {?M1,init_per_group}, + [{conf,[{name,sub1}], + {?M1,init_per_group}, + [{?M1,sub1_tc1},{?M1,sub1_tc2}], + {?M1,end_per_group}}], + {?M1,end_per_group}}] = Found, + + {?M1,GPath,TCs,Found}. + +%%%----------------------------------------------------------------- +%%% +all_in_sub_group2(_) -> + GPath = sub2, TCs = all, + + Found = ct_groups:find_groups(?M1, GPath, TCs, groups1()), + + [Top2 = + {conf,[{name,top2}], + {?M1,init_per_group}, + [{conf,[{name,sub2}], + {?M1,init_per_group}, + [{?M1,sub2_tc1},{?M1,sub2_tc2}], + {?M1,end_per_group}}], + {?M1,end_per_group}}, + + {conf,[{name,sub2}], + {?M1,init_per_group}, + [{?M1,sub2_tc1},{?M1,sub2_tc2}], + {?M1,end_per_group}}] = Found, + + {?M1,GPath,TCs,Top2}. + +%%%----------------------------------------------------------------- +%%% +testcase_in_top_group1(_) -> + GPath = top1, TCs = [top1_tc2], + + Found = ct_groups:find_groups(?M1, GPath, TCs, groups1()), + + [{conf,[{name,top1}], + {?M1,init_per_group}, + [{?M1,top1_tc2}], + {?M1,end_per_group}}] = Found, + + {?M1,GPath,TCs,Found}. + +%%%----------------------------------------------------------------- +%%% +testcase_in_top_group2(_) -> + GPath = top2, TCs = [top2_tc2], + + Found = ct_groups:find_groups(?M1, GPath, TCs, groups1()), + + [{conf,[{name,top2}], + {?M1,init_per_group}, + [{?M1,top2_tc2}], + {?M1,end_per_group}}] = Found, + + {?M1,GPath,TCs,Found}. + +%%%----------------------------------------------------------------- +%%% +testcase_in_sub_group1(_) -> + GPath = sub1, TCs = [sub1_tc2], + + Found = ct_groups:find_groups(?M1, GPath, TCs, groups1()), + + [{conf,[{name,top1}], + {?M1,init_per_group}, + [{conf,[{name,sub1}], + {?M1,init_per_group}, + [{?M1,sub1_tc2}], + {?M1,end_per_group}}], + {?M1,end_per_group}}] = Found, + + {?M1,GPath,TCs,Found}. + +%%%----------------------------------------------------------------- +%%% +testcase_in_sub_group2(_) -> + GPath = sub2, TCs = [sub2_tc2], + + Found = ct_groups:find_groups(?M1, GPath, TCs, groups1()), + + [Top2 = + {conf,[{name,top2}], + {?M1,init_per_group}, + [{conf,[{name,sub2}], + {?M1,init_per_group}, + [{?M1,sub2_tc2}], + {?M1,end_per_group}}], + {?M1,end_per_group}}, + + {conf,[{name,sub2}], + {?M1,init_per_group}, + [{?M1,sub2_tc2}], + {?M1,end_per_group}}] = Found, + + {?M1,GPath,TCs,Top2}. + +%%%----------------------------------------------------------------- +%%% +testcase_in_top_groups1(_) -> + GPath = [top1,top2], TCs = all, + + Found = ct_groups:find_groups(?M2, GPath, TCs, groups2()), + + [{conf,[{name,top1}], + {?M2,init_per_group}, + [{?M2,top1_tc1},{?M2,top_tc2},{?M2,tc3}, + {conf,[{name,sub11}], + {?M2,init_per_group}, + [{?M2,sub11_tc1},{?M2,sub_tc2},{?M2,tc3}], + {?M2,end_per_group}}, + {conf,[{name,sub12}], + {?M2,init_per_group}, + [{?M2,sub12_tc1},{?M2,sub_tc2},{?M2,tc3}, + {conf,[{name,sub121}], + {?M2,init_per_group}, + [{?M2,sub121_tc1},{?M2,sub_tc2},{?M2,tc3}], + {?M2,end_per_group}}], + {?M2,end_per_group}}], + {?M2,end_per_group}}, + + {conf,[{name,top2}], + {?M2,init_per_group}, + [{conf,[{name,sub21}], + {?M2,init_per_group}, + [{?M2,sub21_tc1},{?M2,sub_tc2},{?M2,tc3}, + {conf,[{name,sub2xx}], + {?M2,init_per_group}, + [{?M2,sub2xx_tc1},{?M2,sub_tc2},{?M2,tc3}], + {?M2,end_per_group}}], + {?M2,end_per_group}}, + {?M2,top2_tc1},{?M2,top_tc2},{?M2,tc3}, + {conf,[{name,sub22}], + {?M2,init_per_group}, + [{conf,[{name,sub221}], + {?M2,init_per_group}, + [{?M2,sub221_tc1},{?M2,sub_tc2},{?M2,tc3}], + {?M2,end_per_group}}, + {?M2,sub22_tc1},{?M2,sub_tc2},{?M2,tc3}, + {conf,[{name,sub2xx}], + {?M2,init_per_group}, + [{?M2,sub2xx_tc1},{?M2,sub_tc2},{?M2,tc3}], + {?M2,end_per_group}}], + {?M2,end_per_group}}], + {?M2,end_per_group}}] = Found, + + {?M2,GPath,TCs,Found}. + +%%%----------------------------------------------------------------- +%%% +testcase_in_top_groups2(_) -> + GPath = [top1,top2], TCs = tc3, + + Found = ct_groups:find_groups(?M2, GPath, TCs, groups2()), + + [{conf,[{name,top1}], + {?M2,init_per_group}, + [{?M2,tc3}, + {conf,[{name,sub11}], + {?M2,init_per_group}, + [{?M2,tc3}], + {?M2,end_per_group}}, + {conf,[{name,sub12}], + {?M2,init_per_group}, + [{?M2,tc3}, + {conf,[{name,sub121}], + {?M2,init_per_group}, + [{?M2,tc3}], + {?M2,end_per_group}}], + {?M2,end_per_group}}], + {?M2,end_per_group}}, + + {conf,[{name,top2}], + {?M2,init_per_group}, + [{?M2,tc3}, + {conf,[{name,sub21}], + {?M2,init_per_group}, + [{?M2,tc3}, + {conf,[{name,sub2xx}], + {?M2,init_per_group}, + [{?M2,tc3}], + {?M2,end_per_group}}], + {?M2,end_per_group}}, + + {conf,[{name,sub22}], + {?M2,init_per_group}, + [{?M2,tc3}, + {conf,[{name,sub221}], + {?M2,init_per_group}, + [{?M2,tc3}], + {?M2,end_per_group}}, + {conf,[{name,sub2xx}], + {?M2,init_per_group}, + [{?M2,tc3}], + {?M2,end_per_group}}], + {?M2,end_per_group}}], + {?M2,end_per_group}}] = Found, + + {?M2,GPath,TCs,Found}. + +%%%----------------------------------------------------------------- +%%% +testcase_in_top_groups3(_) -> + GPath = [top1,top2], TCs = top1_tc1, + + Found = ct_groups:find_groups(?M2, GPath, TCs, groups2()), + + [{conf,[{name,top1}], + {?M2,init_per_group}, + [{?M2,top1_tc1}], + {?M2,end_per_group}}] = Found, + + {?M2,GPath,TCs,Found}. + +%%%----------------------------------------------------------------- +%%% +testcase_in_top_groups4(_) -> + GPath = [top1,top2], TCs = sub2xx_tc1, + + Found = ct_groups:find_groups(?M2, GPath, TCs, groups2()), + + [{conf,[{name,top2}], + {?M2,init_per_group}, + [{conf,[{name,sub21}], + {?M2,init_per_group}, + [{conf,[{name,sub2xx}], + {?M2,init_per_group}, + [{?M2,sub2xx_tc1}], + {?M2,end_per_group}}], + {?M2,end_per_group}}, + {conf,[{name,sub22}], + {?M2,init_per_group}, + [{conf,[{name,sub2xx}], + {?M2,init_per_group}, + [{?M2,sub2xx_tc1}], + {?M2,end_per_group}}], + {?M2,end_per_group}}], + {?M2,end_per_group}}] = Found, + + {?M2,GPath,TCs,Found}. + +%%%----------------------------------------------------------------- +%%% +testcase_in_top_groups5(_) -> + GPath = [top1,top2], TCs = [sub21_tc1,sub22_tc1], + + Found = ct_groups:find_groups(?M2, [top1,top2], [sub21_tc1,sub22_tc1], + groups2()), + + [{conf,[{name,top2}], + {?M2,init_per_group}, + [{conf,[{name,sub21}], + {?M2,init_per_group}, + [{?M2,sub21_tc1}], + {?M2,end_per_group}}, + {conf,[{name,sub22}], + {?M2,init_per_group}, + [{?M2,sub22_tc1}], + {?M2,end_per_group}}], + {?M2,end_per_group}}] = Found, + + {?M2,GPath,TCs,Found}. + +%%%----------------------------------------------------------------- +%%% +testcase_in_top_groups6(_) -> + GPath = [[top1],[top2]], TCs = tc3, + + Found = ct_groups:find_groups(?M2, GPath, TCs, groups2()), + + [{conf,[{name,top1}], + {?M2,init_per_group}, + [{?M2,tc3}], + {?M2,end_per_group}}, + {conf,[{name,top2}], + {?M2,init_per_group}, + [{?M2,tc3}], + {?M2,end_per_group}}] = Found, + + {?M2,GPath,TCs,Found}. + +%%%----------------------------------------------------------------- +%%% +testcase_in_top_groups7(_) -> + GPath = [[top1],[top2]], TCs = all, + + Found = ct_groups:find_groups(?M2, GPath, TCs, groups2()), + + [{conf,[{name,top1}], + {?M2,init_per_group}, + [{?M2,top1_tc1}, + {?M2,top_tc2}, + {?M2,tc3}], + {?M2,end_per_group}}, + {conf,[{name,top2}], + {?M2,init_per_group}, + [{?M2,top2_tc1}, + {?M2,top_tc2}, + {?M2,tc3}], + {?M2,end_per_group}}] = Found, + + {?M2,GPath,TCs,Found}. + +%%%----------------------------------------------------------------- +%%% +testcase_in_sub_groups1(_) -> + GPath = [sub121], TCs = tc3, + + Found = ct_groups:find_groups(?M2, sub121, tc3, groups2()), + Found = ct_groups:find_groups(?M2, [sub121], tc3, groups2()), + + [{conf,[{name,top1}], + {?M2,init_per_group}, + [{conf,[{name,sub12}], + {?M2,init_per_group}, + [{conf,[{name,sub121}], + {?M2,init_per_group}, + [{?M2,tc3}], + {?M2,end_per_group}}], + {?M2,end_per_group}}], + {?M2,end_per_group}}] = Found, + + {?M2,GPath,TCs,Found}. + +%%%----------------------------------------------------------------- +%%% +testcase_in_sub_groups2(_) -> + GPath = sub12, TCs = tc3, + + Found = ct_groups:find_groups(?M2, sub12, tc3, groups2()), + Found = ct_groups:find_groups(?M2, [sub12], tc3, groups2()), + + [{conf,[{name,top1}], + {?M2,init_per_group}, + [{conf,[{name,sub12}], + {?M2,init_per_group}, + [{?M2,tc3}, + {conf,[{name,sub121}], + {?M2,init_per_group}, + [{?M2,tc3}], + {?M2,end_per_group}}], + {?M2,end_per_group}}], + {?M2,end_per_group}}] = Found, + + FoundX = ct_groups:find_groups(?M2, [[sub12]], tc3, groups2()), + + [{conf,[{name,top1}], + {?M2,init_per_group}, + [{conf,[{name,sub12}], + {?M2,init_per_group}, + [{?M2,tc3}], + {?M2,end_per_group}}], + {?M2,end_per_group}}] = FoundX, + + {?M2,GPath,TCs,Found}. + +%%%----------------------------------------------------------------- +%%% +testcase_in_sub_groups3(_) -> + GPath = [sub121,sub221], TCs = all, + + Found = ct_groups:find_groups(?M2, GPath, TCs, groups2()), + + [Top1 = + {conf,[{name,top1}], + {?M2,init_per_group}, + [{conf,[{name,sub12}], + {?M2,init_per_group}, + [{conf,[{name,sub121}], + {?M2,init_per_group}, + [{?M2,sub121_tc1}, + {?M2,sub_tc2}, + {?M2,tc3}], + {?M2,end_per_group}}], + {?M2,end_per_group}}], + {?M2,end_per_group}}, + + Top2 = + {conf,[{name,top2}], + {?M2,init_per_group}, + [{conf,[{name,sub22}], + {?M2,init_per_group}, + [{conf,[{name,sub221}], + {?M2,init_per_group}, + [{?M2,sub221_tc1}, + {?M2,sub_tc2}, + {?M2,tc3}], + {?M2,end_per_group}}], + {?M2,end_per_group}}], + {?M2,end_per_group}}, + + {conf,[{name,sub22}], + {?M2,init_per_group}, + [{conf,[{name,sub221}], + {?M2,init_per_group}, + [{?M2,sub221_tc1}, + {?M2,sub_tc2}, + {?M2,tc3}], + {?M2,end_per_group}}], + {?M2,end_per_group}}, + + {conf,[{name,sub221}], + {?M2,init_per_group}, + [{?M2,sub221_tc1}, + {?M2,sub_tc2}, + {?M2,tc3}], + {?M2,end_per_group}}] = Found, + + {?M2,GPath,TCs,[Top1,Top2]}. + +%%%----------------------------------------------------------------- +%%% +testcase_in_sub_groups4(_) -> + GPath = [top1,sub21], TCs = sub_tc2, + + Found = ct_groups:find_groups(?M2, GPath, TCs, groups2()), + + [Top1 = + {conf,[{name,top1}], + {?M2,init_per_group}, + [{conf,[{name,sub11}], + {?M2,init_per_group}, + [{?M2,sub_tc2}], + {?M2,end_per_group}}, + {conf,[{name,sub12}], + {?M2,init_per_group}, + [{?M2,sub_tc2}, + {conf,[{name,sub121}], + {?M2,init_per_group}, + [{?M2,sub_tc2}], + {?M2,end_per_group}}], + {?M2,end_per_group}}], + {?M2,end_per_group}}, + + Top2 = + {conf,[{name,top2}], + {?M2,init_per_group}, + [{conf,[{name,sub21}], + {?M2,init_per_group}, + [{?M2,sub_tc2}, + {conf,[{name,sub2xx}], + {?M2,init_per_group}, + [{?M2,sub_tc2}], + {?M2,end_per_group}}], + {?M2,end_per_group}}], + {?M2,end_per_group}}, + + {conf,[{name,sub21}], + {?M2,init_per_group}, + [{?M2,sub_tc2}, + {conf,[{name,sub2xx}], + {?M2,init_per_group}, + [{?M2,sub_tc2}], + {?M2,end_per_group}}], + {?M2,end_per_group}}] = Found, + + {?M2,GPath,TCs,[Top1,Top2]}. + +%%%----------------------------------------------------------------- +%%% +testcase_in_sub_groups5(_) -> + GPath = [[top1,sub12]], TCs = sub12_tc1, + + Found = ct_groups:find_groups(?M2, GPath, TCs, groups2()), + + [{conf,[{name,top1}], + {?M2,init_per_group}, + [{conf,[{name,sub12}], + {?M2,init_per_group}, + [{?M2,sub12_tc1}], + {?M2,end_per_group}}], + {?M2,end_per_group}}] = Found, + + {?M2,GPath,TCs,Found}. + +%%%----------------------------------------------------------------- +%%% +testcase_in_sub_groups6(_) -> + GPath = [[top1,sub12]], TCs = [sub_tc2], + + Found = ct_groups:find_groups(?M2, GPath, TCs, groups2()), + + [{conf,[{name,top1}], + {?M2,init_per_group}, + [{conf,[{name,sub12}], + {?M2,init_per_group}, + [{?M2,sub_tc2}], + {?M2,end_per_group}}], + {?M2,end_per_group}}] = Found, + + {?M2,GPath,TCs,Found}. + +%%%----------------------------------------------------------------- +%%% +testcase_in_sub_groups7(_) -> + GPath = [[top1,sub12]], TCs = [sub12_tc1,sub_tc2], + + Found = ct_groups:find_groups(?M2, GPath, TCs, groups2()), + + [{conf,[{name,top1}], + {?M2,init_per_group}, + [{conf,[{name,sub12}], + {?M2,init_per_group}, + [{?M2,sub12_tc1}, + {?M2,sub_tc2}], + {?M2,end_per_group}}], + {?M2,end_per_group}}] = Found, + + {?M2,GPath,TCs,Found}. + +%%%----------------------------------------------------------------- +%%% +testcase_in_sub_groups8(_) -> + GPath = [[top2,sub22]], TCs = [sub22_tc1,sub_tc2], + + Found = ct_groups:find_groups(?M2, GPath, TCs, groups2()), + + [{conf,[{name,top2}], + {?M2,init_per_group}, + [{conf,[{name,sub22}], + {?M2,init_per_group}, + [{?M2,sub22_tc1}, + {?M2,sub_tc2}], + {?M2,end_per_group}}], + {?M2,end_per_group}}] = Found, + + {?M2,GPath,TCs,Found}. + +%%%----------------------------------------------------------------- +%%% +testcase_in_sub_groups9(_) -> + GPath = [[sub2xx]], TCs = tc3, + + Found = ct_groups:find_groups(?M2, sub2xx, tc3, groups2()), + Found = ct_groups:find_groups(?M2, [[sub2xx]], tc3, groups2()), + + [Top2 = + {conf,[{name,top2}], + {?M2,init_per_group}, + [{conf,[{name,sub21}], + {?M2,init_per_group}, + [{conf,[{name,sub2xx}], + {?M2,init_per_group}, + [{?M2,tc3}], + {?M2,end_per_group}}], + {?M2,end_per_group}}, + {conf,[{name,sub22}], + {?M2,init_per_group}, + [{conf,[{name,sub2xx}], + {?M2,init_per_group}, + [{?M2,tc3}], + {?M2,end_per_group}}], + {?M2,end_per_group}}], + {?M2,end_per_group}}, + + {conf,[{name,sub21}], + {?M2,init_per_group}, + [{conf,[{name,sub2xx}], + {?M2,init_per_group}, + [{?M2,tc3}], + {?M2,end_per_group}}], + {?M2,end_per_group}}, + + {conf,[{name,sub22}], + {?M2,init_per_group}, + [{conf,[{name,sub2xx}], + {?M2,init_per_group}, + [{?M2,tc3}], + {?M2,end_per_group}}], + {?M2,end_per_group}}, + + {conf,[{name,sub2xx}], + {?M2,init_per_group}, + [{?M2,tc3}], + {?M2,end_per_group}}] = Found, + + {?M2,GPath,TCs,Top2}. + +%%%----------------------------------------------------------------- +%%% +testcase_in_sub_groups10(_) -> + GPath = [[sub22,sub2xx]], TCs = tc3, + + Found = ct_groups:find_groups(?M2, GPath, TCs, groups2()), + + [Top2 = + {conf,[{name,top2}], + {?M2,init_per_group}, + [{conf,[{name,sub22}], + {?M2,init_per_group}, + [{conf,[{name,sub2xx}], + {?M2,init_per_group}, + [{?M2,tc3}], + {?M2,end_per_group}}], + {?M2,end_per_group}}], + {?M2,end_per_group}}, + + {conf,[{name,sub22}], + {?M2,init_per_group}, + [{conf,[{name,sub2xx}], + {?M2,init_per_group}, + [{?M2,tc3}], + {?M2,end_per_group}}], + {?M2,end_per_group}}] = Found, + + {?M2,GPath,TCs,Top2}. + +%%%----------------------------------------------------------------- +%%% +testcase_in_sub_groups11(_) -> + GPath = [[top1,sub12,sub121]], TCs = all, + + Found = ct_groups:find_groups(?M2, GPath, TCs, groups2()), + + [{conf,[{name,top1}], + {?M2,init_per_group}, + [{conf,[{name,sub12}], + {?M2,init_per_group}, + [{conf,[{name,sub121}], + {?M2,init_per_group}, + [{?M2,sub121_tc1}, + {?M2,sub_tc2}, + {?M2,tc3}], + {?M2,end_per_group}}], + {?M2,end_per_group}}], + {?M2,end_per_group}}] = Found, + + {?M2,GPath,TCs,Found}. + +%%%----------------------------------------------------------------- +%%% +testcase_in_sub_groups12(_) -> + GPath = [[top2,sub2xx]], TCs = [sub2xx_tc1,tc3], + + Found = ct_groups:find_groups(?M2, GPath, TCs, groups2()), + + [{conf,[{name,top2}], + {?M2,init_per_group}, + [{conf,[{name,sub21}], + {?M2,init_per_group}, + [{conf,[{name,sub2xx}], + {?M2,init_per_group}, + [{?M2,sub2xx_tc1}, + {?M2,tc3}], + {?M2,end_per_group}}], + {?M2,end_per_group}}, + {conf,[{name,sub22}], + {?M2,init_per_group}, + [{conf,[{name,sub2xx}], + {?M2,init_per_group}, + [{?M2,sub2xx_tc1}, + {?M2,tc3}], + {?M2,end_per_group}}], + {?M2,end_per_group}}], + {?M2,end_per_group}}] = Found, + + {?M2,GPath,TCs,Found}. + +%%%----------------------------------------------------------------- +%%% +testcase_in_sub_groups13(_) -> + GPath = [[top2,sub22,sub2xx]], TCs = [top2_tc1,sub2xx_tc1,tc3], + + Found = ct_groups:find_groups(?M2, GPath, TCs, groups2()), + + [{conf,[{name,top2}], + {?M2,init_per_group}, + [{conf,[{name,sub22}], + {?M2,init_per_group}, + [{conf,[{name,sub2xx}], + {?M2,init_per_group}, + [{?M2,sub2xx_tc1}, + {?M2,tc3}], + {?M2,end_per_group}}], + {?M2,end_per_group}}], + {?M2,end_per_group}}] = Found, + + {?M2,GPath,TCs,Found}. + +%%%----------------------------------------------------------------- +%%% +bad_testcase_in_sub_groups1(_) -> + GPath = [sub2xx], TCs = [top2_tc1], + + Found = ct_groups:find_groups(?M2, GPath, TCs, groups2()), + + [] = Found, + + {?M2,GPath,TCs,Found}. + +%%%----------------------------------------------------------------- +%%% +bad_testcase_in_sub_groups2(_) -> + GPath = [sub12,sub2xx], TCs = [top1_tc1,top2_tc1], + + Found = ct_groups:find_groups(?M2, GPath, TCs, groups2()), + + [] = Found, + + {?M2,GPath,TCs,Found}. + +%%%----------------------------------------------------------------- +%%% CASES EXECUTING THE TESTS +%%%----------------------------------------------------------------- + +run_groups_with_options(Config) -> + DataDir = ?config(data_dir, Config), + + {M1All,M1Rest,M2All,M2Rest} = get_all_groups_and_cases(Config), + + M1AllGrs = lists:flatmap(fun({Path,_,_}) when is_atom(hd(Path)) -> Path; + ({Path,_,_}) when is_list(hd(Path)) -> Path; + ({Path,_,_}) -> [Path] + end, M1All), + + %% ct:pal("NOW RUNNING M1 TEST: ~p", [M1All]), + + {OptsM11,ERPidM11} = setup([{dir,DataDir},{suite,?M1}, + {group,M1AllGrs},{label,m1_all_cases}], Config), + M1AllGrInfo = {M1AllGrs,lists:flatten([Found || {_,_,Found} <- M1All])}, + ok = execute(m1_all_cases, M1AllGrInfo, OptsM11, ERPidM11, Config), + + lists:foldl( + fun({GrPath,TCs,Found}, N) -> + TestName = list_to_atom("m1_spec_cases_" ++ integer_to_list(N)), + %% ct:pal("NOW RUNNING M1 TEST ~p: ~p + ~p", + %% [TestName,GrPath,TCs]), + {OptsM12,ERPidM12} = setup([{dir,DataDir},{suite,?M1}, + {group,GrPath},{testcase,TCs}, + {label,TestName}], Config), + ok = execute(TestName, {GrPath,TCs,Found}, + OptsM12, ERPidM12, Config), + N+1 + end, 1, M1Rest), + + %% ct:pal("NOW RUNNING M2 TEST: ~p", [M2All]), + + M2AllGrs = lists:flatmap(fun({Path,_,_}) when is_atom(hd(Path)) -> Path; + ({Path,_,_}) when is_list(hd(Path)) -> Path; + ({Path,_,_}) -> [Path] + end, M2All), + + + {OptsM21,ERPidM21} = setup([{dir,DataDir},{suite,?M2}, + {group,M2AllGrs},{testcase,all}, + {label,m2_all_cases}], Config), + M2AllGrInfo = {M2AllGrs,lists:flatten([Found || {_,_,Found} <- M2All])}, + ok = execute(m2_all_cases, M2AllGrInfo, OptsM21, ERPidM21, Config), + + lists:foldl( + fun({GrPath,TCs,Found}, N) -> + TestName = list_to_atom("m2_spec_cases_" ++ integer_to_list(N)), + %% ct:pal("NOW RUNNING M2 TEST ~p: ~p + ~p", [TestName,GrPath,TCs]), + {OptsM22,ERPidM22} = setup([{dir,DataDir},{suite,?M2}, + {group,GrPath},{testcase,TCs}, + {label,TestName}], Config), + ok = execute(TestName, {GrPath,TCs,Found}, + OptsM22, ERPidM22, Config), + N+1 + end, 1, M2Rest), + ok. + + +%%%----------------------------------------------------------------- +%%% +run_groups_with_testspec(Config) -> + Name = run_groups_with_testspec, + DataDir = ?config(data_dir, Config), + PrivDir = ?config(priv_dir, Config), + + {M1All,M1Rest,M2All,M2Rest} = get_all_groups_and_cases(Config), + + M1AllGrs = lists:flatmap(fun({Path,_,_}) when is_atom(hd(Path)) -> Path; + ({Path,_,_}) when is_list(hd(Path)) -> Path; + ({Path,_,_}) -> [Path] + end, M1All), + M1AllTerm = {groups,DataDir,?M1,M1AllGrs}, + + M1RestTerms = lists:map( + fun({GrPath,TCs,_}) -> + {groups,DataDir,?M1,GrPath,{cases,TCs}} + end, M1Rest), + + M2AllGrs = lists:flatmap(fun({Path,_,_}) when is_atom(hd(Path)) -> Path; + ({Path,_,_}) when is_list(hd(Path)) -> Path; + ({Path,_,_}) -> [Path] + end, M2All), + M2AllTerm = {groups,DataDir,?M2,M2AllGrs,{cases,all}}, + + M2RestTerms = lists:map( + fun({GrPath,TCs,_}) -> + {groups,DataDir,?M2,GrPath,{cases,TCs}} + end, M2Rest), + + GroupTerms = lists:flatten([M1AllTerm, + M1RestTerms, + M2AllTerm, + M2RestTerms]), + + TestSpec = [{merge_tests,false}, + {label,Name}] ++ GroupTerms, + + ct:pal("Here's the test spec:~n~p", [TestSpec]), + + TestSpecName = ct_test_support:write_testspec(TestSpec, PrivDir, + "groups_search_spec"), + + {Opts,ERPid} = setup([{spec,TestSpecName}], Config), + GroupInfo = + [{M1AllTerm,lists:flatten([Found || {_,_,Found} <- M1All])} | + M1Rest] ++ + [{M2AllTerm,lists:flatten([Found || {_,_,Found} <- M2All])} | + M2Rest], + ok = execute(Name, GroupInfo, Opts, ERPid, Config). + +%%%----------------------------------------------------------------- +%%% HELP FUNCTIONS +%%%----------------------------------------------------------------- + +groups1() -> + [{top1,[],[top1_tc1,top1_tc2,{sub1,[],[sub1_tc1,sub1_tc2]}]}, + {top2,[],[{group,sub2},top2_tc1,top2_tc2]}, + {sub2,[],[sub2_tc1,sub2_tc2]}]. + +groups2() -> + [{top1,[],[top1_tc1,top_tc2,tc3, + {sub11,[],[sub11_tc1,sub_tc2,tc3]}, + {sub12,[],[sub12_tc1,sub_tc2,tc3, + {sub121,[],[sub121_tc1,sub_tc2,tc3]}]}]}, + {top2,[],[{group,sub21},top2_tc1,top_tc2,tc3,{group,sub22}]}, + {sub21,[],[sub21_tc1,sub_tc2,tc3,{group,sub2xx}]}, + {sub22,[],[{group,sub221},sub22_tc1,sub_tc2,tc3,{group,sub2xx}]}, + {sub221,[],[sub221_tc1,sub_tc2,tc3]}, + {sub2xx,[],[sub2xx_tc1,sub_tc2,tc3]}]. + +get_all_groups_and_cases(Config) -> + {value,{_,_,FindGrTCs}} = lists:keysearch(find_groups, 1, groups()), + + MGTFs = [apply(?MODULE, TC, [Config]) || TC <- FindGrTCs], + + ct:pal("Extracted data from ~p test cases", [length(MGTFs)]), + + lists:foldr(fun({M,Gs,TCs,F}, + {M11,M12,M21,M22}) -> + case {M,Gs,TCs} of + {?M1,all,_} -> {M11,[{Gs,TCs,F}|M12],M21,M22}; + {?M1,_,all} -> {[{Gs,all,F}|M11],M12,M21,M22}; + {?M1,_,_} -> {M11,[{Gs,TCs,F}|M12],M21,M22}; + {?M2,all,_} -> {M11,M12,M21,[{Gs,TCs,F}|M22]}; + {?M2,_,all} -> {M11,M12,[{Gs,all,F}|M21],M22}; + {?M2,_,_} -> {M11,M12,M21,[{Gs,TCs,F}|M22]} + end + end, {[],[],[],[]}, MGTFs). + +%%%----------------------------------------------------------------- + +setup(Test, Config) -> + Opts0 = ct_test_support:get_opts(Config), + Level = ?config(trace_level, Config), + EvHArgs = [{cbm,ct_test_support},{trace_level,Level}], + Opts = Opts0 ++ [{event_handler,{?eh,EvHArgs}}|Test], + ERPid = ct_test_support:start_event_receiver(Config), + {Opts,ERPid}. + +execute(Name, TestParams, Opts, ERPid, Config) -> + ok = ct_test_support:run(Opts, Config), + Events = ct_test_support:get_events(ERPid, Config), + Events1 = reformat(Events, ?eh), + ct_test_support:log_events(Name, + Events1, + ?config(priv_dir, Config), + Opts), + verify_events(Name, TestParams, Events1). + +reformat(Events, EH) -> + ct_test_support:reformat(Events, EH). + +%%%----------------------------------------------------------------- +%%% TEST EVENTS +verify_events(Name, Params, Events) -> + %% 2 tests (ct:run_test + script_start) is default + verify_events(Name, Params, Events, 2). + +verify_events(_, _, _, 0) -> + ok; +verify_events(Name, Params, Events, N) -> + test_events(Name, Params, Events), + verify_events(Name, Params, Events, N-1). + +%%%----------------------------------------------------------------- +%%% check run_groups_with_options + +test_events(TestName, {GrPath,Found}, Events) -> + test_events(TestName, {GrPath,all,Found}, Events); + +test_events(TestName, {GrPath,TCs,Found}, Events) + when TestName /= run_groups_with_testspec -> + try check_events(Events, flatten_tests(Found)) of + ok -> ok + catch + throw:Reason -> + ct:pal("Test failed for ~p with group path ~p and cases ~p" + "~nReason: ~p", [TestName,GrPath,TCs,Reason]), + throw(failed) + end; + +%%%----------------------------------------------------------------- +%%% check run_groups_with_testspec + +test_events(run_groups_with_testspec, Params, Events) -> + AllFound = lists:flatmap(fun({_All,Found}) when is_tuple(Found) -> + [Found]; + ({_All,Found}) -> + Found; + ({_Gr,_TCs,Found}) when is_tuple(Found) -> + [Found]; + ({_Gr,_TCs,Found}) -> + Found + end, Params), + try check_events(Events, flatten_tests(AllFound)) of + ok -> ok + catch + throw:Reason -> + ct:pal("Test failed for run_groups_with_testspec." + "~nReason: ~p", [Reason]), + throw(failed) + end. + +flatten_tests({conf,[{name,G}|_],{Mod,_I},Tests,_E}) -> + lists:flatten([{group,Mod,G} | flatten_tests(Tests)]); +flatten_tests([{conf,[{name,G}|_],{Mod,_I},Tests,_E} | Confs]) -> + lists:flatten([{group,Mod,G} | flatten_tests(Tests)]) ++ + lists:flatten(flatten_tests(Confs)); +flatten_tests([{_Mod,_TC} = Case | Tests]) -> + lists:flatten([Case | flatten_tests(Tests)]); +flatten_tests([]) -> + []. + +check_events([{_,tc_start,{Mod,{init_per_group,G,_}}} | Evs], + [{group,Mod,G} | Check]) -> + check_events(Evs, Check); +check_events([{_,tc_start,{Mod,TC}} | Evs], + [{Mod,TC} | Check]) when is_atom(TC) -> + check_events(Evs, Check); +check_events([{_,tc_start,{Mod,{init_per_group,G,_}}} | _Evs], Check) -> + ct:pal("CHECK FAILED!~nGroup ~p in ~p not found in ~p.", + [G,Mod,Check]), + throw({test_not_found,{Mod,G}}); +check_events([{_,tc_start,{Mod,TC}} | _Evs], Check) + when is_atom(TC), TC /= init_per_suite, TC /= end_per_suite -> + ct:pal("CHECK FAILED!~nCase ~p in ~p not found in ~p.", + [TC,Mod,Check]), + throw({test_not_found,{Mod,TC}}); +check_events([Group | Evs], Check) when is_list(Group) -> + Check1 = check_events(Group, Check), + check_events(Evs, Check1); +check_events(_, []) -> + ok; +check_events([Elem | Evs], Check) when is_tuple(Elem) -> + check_events(Evs, Check); +check_events([], Check = [_|_]) -> + ct:pal("CHECK FAILED!~nTests remain: ~p", [Check]), + throw({tests_remain,Check}); +check_events([Wut | _],_) -> + throw({unexpected,Wut}). + diff --git a/lib/common_test/test/ct_groups_search_SUITE_data/groups_search_dummy_1_SUITE.erl b/lib/common_test/test/ct_groups_search_SUITE_data/groups_search_dummy_1_SUITE.erl new file mode 100644 index 0000000000..1c5b572f92 --- /dev/null +++ b/lib/common_test/test/ct_groups_search_SUITE_data/groups_search_dummy_1_SUITE.erl @@ -0,0 +1,83 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2009-2012. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% +%% +-module(groups_search_dummy_1_SUITE). + +-compile(export_all). + +-include_lib("common_test/include/ct.hrl"). + + +all() -> + [{group,top1}, + {group,top2}]. + +groups() -> + [{top1,[],[top1_tc1,top1_tc2,{sub1,[],[sub1_tc1,sub1_tc2]}]}, + {top2,[],[{group,sub2},top2_tc1,top2_tc2]}, + {sub2,[],[sub2_tc1,sub2_tc2]}]. + +%%%----------------------------------------------------------------- +%%% CONFIG FUNCS +%%%----------------------------------------------------------------- + +init_per_suite(Config) -> + Config. + +end_per_suite(_Config) -> + ok. + +init_per_testcase(_TestCase, Config) -> + Config. + +end_per_testcase(_TestCase, _Config) -> + ok. + +init_per_group(_, Config) -> + Config. + +end_per_group(_, _Config) -> + ok. + +%%%----------------------------------------------------------------- +%%% TEST CASES +%%%----------------------------------------------------------------- + +top1_tc1(_) -> + ok. + +top1_tc2(_) -> + ok. + +sub1_tc1(_) -> + ok. + +sub1_tc2(_) -> + ok. + +top2_tc1(_) -> + ok. + +top2_tc2(_) -> + ok. + +sub2_tc1(_) -> + ok. + +sub2_tc2(_) -> + ok. diff --git a/lib/common_test/test/ct_groups_search_SUITE_data/groups_search_dummy_2_SUITE.erl b/lib/common_test/test/ct_groups_search_SUITE_data/groups_search_dummy_2_SUITE.erl new file mode 100644 index 0000000000..060012de29 --- /dev/null +++ b/lib/common_test/test/ct_groups_search_SUITE_data/groups_search_dummy_2_SUITE.erl @@ -0,0 +1,102 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2009-2012. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% +%% +-module(groups_search_dummy_2_SUITE). + +-compile(export_all). + +-include_lib("common_test/include/ct.hrl"). + + +all() -> + [{group,top1}, + {group,top2}]. + +groups() -> + [{top1,[],[top1_tc1,top_tc2,tc3, + {sub11,[],[sub11_tc1,sub_tc2,tc3]}, + {sub12,[],[sub12_tc1,sub_tc2,tc3, + {sub121,[],[sub121_tc1,sub_tc2,tc3]}]}]}, + + {top2,[],[{group,sub21},top2_tc1,top_tc2,tc3,{group,sub22}]}, + {sub21,[],[sub21_tc1,sub_tc2,tc3,{group,sub2xx}]}, + {sub22,[],[{group,sub221},sub22_tc1,sub_tc2,tc3,{group,sub2xx}]}, + {sub221,[],[sub221_tc1,sub_tc2,tc3]}, + {sub2xx,[],[sub2xx_tc1,sub_tc2,tc3]}]. + +%%%----------------------------------------------------------------- +%%% CONFIG FUNCS +%%%----------------------------------------------------------------- + +init_per_suite(Config) -> + Config. + +end_per_suite(_Config) -> + ok. + +init_per_testcase(_TestCase, Config) -> + Config. + +end_per_testcase(_TestCase, _Config) -> + ok. + +init_per_group(_, Config) -> + Config. + +end_per_group(_, _Config) -> + ok. + +%%%------------------------------------------------------------------ +%%% TEST CASES +%%%------------------------------------------------------------------ + +top1_tc1(_) -> + ok. + +top_tc2(_) -> + ok. + +tc3(_) -> + ok. + +sub_tc2(_) -> + ok. + +sub11_tc1(_) -> + ok. + +sub12_tc1(_) -> + ok. + +sub121_tc1(_) -> + ok. + +top2_tc1(_) -> + ok. + +sub21_tc1(_) -> + ok. + +sub22_tc1(_) -> + ok. + +sub221_tc1(_) -> + ok. + +sub2xx_tc1(_) -> + ok. diff --git a/lib/common_test/test/ct_master_SUITE.erl b/lib/common_test/test/ct_master_SUITE.erl index 27243a0067..56a343a96f 100644 --- a/lib/common_test/test/ct_master_SUITE.erl +++ b/lib/common_test/test/ct_master_SUITE.erl @@ -117,14 +117,8 @@ ct_master_test(Config) when is_list(Config) -> reformat(Events, ?eh), PrivDir, []), - find_events(NodeNames, [{tc_start,{master_SUITE,init_per_suite}}, - {tc_start,{master_SUITE,first_testcase}}, - {tc_start,{master_SUITE,second_testcase}}, - {tc_start,{master_SUITE,third_testcase}}, - {tc_start,{master_SUITE,end_per_suite}}], - Events), - - ok. + TestEvents = events_to_check(ct_master_test), + ok = find_events(NodeNames, TestEvents, Events, Config). %%%----------------------------------------------------------------- %%% HELP FUNCTIONS @@ -153,13 +147,15 @@ make_spec(DataDir, FileName, NodeNames, Suites, Config) -> CM = [{config,master,filename:join(DataDir,"master/config.txt")}], + Env = [{"THIS_MUST_BE_SET","yes"}, + {"SO_MUST_THIS","value"}], NS = lists:map( fun(NodeName) -> {init,NodeName,[ {node_start,[{startup_functions,[]}, - {monitor_master,true}]}, - {eval,{erlang,nodes,[]}} - ] + {monitor_master,true}, + {env,Env}]}, + {eval,{erlang,nodes,[]}}] } end, NodeNames), @@ -199,7 +195,6 @@ run_test(_Name, FileName, Config) -> [{FileName,ok}] = ct_test_support:run({ct_master,run,[FileName]}, [{ct_master,basic_html,[true]}], Config), - timer:sleep(5000), [{FileName,ok}] = ct_test_support:run({ct_master,run,[FileName]}, [{ct_master,basic_html,[false]}], Config). @@ -210,28 +205,26 @@ reformat(Events, EH) -> %%%----------------------------------------------------------------- %%% TEST EVENTS %%%----------------------------------------------------------------- -find_events([], _CheckEvents, _) -> - ok; -find_events([NodeName|NodeNames],CheckEvents,AllEvents) -> - find_events(NodeNames, CheckEvents, - remove_events(add_host(NodeName),CheckEvents, AllEvents, [])). - -remove_events(Node,[{Name,Data} | RestChecks], - [{?eh,#event{ name = Name, node = Node, data = Data }}|RestEvs], - Acc) -> - remove_events(Node, RestChecks, RestEvs, Acc); -remove_events(Node, Checks, [Event|RestEvs], Acc) -> - remove_events(Node, Checks, RestEvs, [Event | Acc]); -remove_events(_Node, [], [], Acc) -> - lists:reverse(Acc); -remove_events(Node, Events, [], Acc) -> - test_server:format("Could not find events: ~p in ~p for node ~p", - [Events, lists:reverse(Acc), Node]), - exit(event_not_found). + +find_events(NodeNames, TestEvents, Events, Config) -> + [begin + Node = add_host(Node0), + io:format("Searching for events for node: ~s", [Node]), + ok = ct_test_support:verify_events(TestEvents, Events, Node, Config), + io:nl() + end || Node0 <- NodeNames], + ok. add_host(NodeName) -> {ok, HostName} = inet:gethostname(), list_to_atom(atom_to_list(NodeName)++"@"++HostName). -expected_events(_) -> - []. +events_to_check(_) -> + [{?eh,tc_start,{master_SUITE,first_testcase}}, + {?eh,tc_done,{master_SUITE,first_testcase,ok}}, + {?eh,tc_start,{master_SUITE,second_testcase}}, + {?eh,tc_done,{master_SUITE,second_testcase,ok}}, + {?eh,tc_start,{master_SUITE,third_testcase}}, + {?eh,tc_done,{master_SUITE,third_testcase,ok}}, + {?eh,tc_start,{master_SUITE,env_vars}}, + {?eh,tc_done,{master_SUITE,env_vars,ok}}]. diff --git a/lib/common_test/test/ct_master_SUITE_data/master/master_SUITE.erl b/lib/common_test/test/ct_master_SUITE_data/master/master_SUITE.erl index 032d69ad9f..8a5009ad62 100644 --- a/lib/common_test/test/ct_master_SUITE_data/master/master_SUITE.erl +++ b/lib/common_test/test/ct_master_SUITE_data/master/master_SUITE.erl @@ -39,7 +39,8 @@ init_per_suite(Config) -> end_per_suite(_) -> ok. -all() -> [first_testcase, second_testcase, third_testcase]. +all() -> [first_testcase, second_testcase, third_testcase, + env_vars]. init_per_testcase(_, Config) -> Config. @@ -56,3 +57,9 @@ second_testcase(_)-> third_testcase(_)-> A = 4, A = 2*2. + +env_vars(_) -> + io:format("~p\n", [os:getenv()]), + "yes" = os:getenv("THIS_MUST_BE_SET"), + "value" = os:getenv("SO_MUST_THIS"), + ok. diff --git a/lib/common_test/test/ct_netconfc_SUITE.erl b/lib/common_test/test/ct_netconfc_SUITE.erl index e6e8d5b09c..3042a924fe 100644 --- a/lib/common_test/test/ct_netconfc_SUITE.erl +++ b/lib/common_test/test/ct_netconfc_SUITE.erl @@ -44,7 +44,12 @@ %%-------------------------------------------------------------------- init_per_suite(Config) -> Config1 = ct_test_support:init_per_suite(Config), - Config1. + case application:load(crypto) of + {error,Reason} -> + {skip, Reason}; + _ -> + Config1 + end. end_per_suite(Config) -> ct_test_support:end_per_suite(Config). @@ -108,7 +113,7 @@ reformat(Events, EH) -> %%%----------------------------------------------------------------- %%% TEST EVENTS %%%----------------------------------------------------------------- -events_to_check(Test,Config) -> +events_to_check(default,Config) -> {module,_} = code:load_abs(filename:join(?config(data_dir,Config), netconfc1_SUITE)), TCs = netconfc1_SUITE:all(), diff --git a/lib/common_test/test/ct_test_support.erl b/lib/common_test/test/ct_test_support.erl index 80cca4a1cc..e5e2e68fcb 100644 --- a/lib/common_test/test/ct_test_support.erl +++ b/lib/common_test/test/ct_test_support.erl @@ -32,7 +32,7 @@ run/2, run/3, run/4, get_opts/1, wait_for_ct_stop/1]). -export([handle_event/2, start_event_receiver/1, get_events/2, - verify_events/3, reformat/2, log_events/4, + verify_events/3, verify_events/4, reformat/2, log_events/4, join_abs_dirs/2]). -export([ct_test_halt/1]). @@ -117,7 +117,10 @@ end_per_suite(Config) -> CTNode = proplists:get_value(ct_node, Config), PrivDir = proplists:get_value(priv_dir, Config), true = rpc:call(CTNode, code, del_path, [filename:join(PrivDir,"")]), - cover:stop(CTNode), + case test_server:is_cover() of + true -> cover:flush(CTNode); + false -> ok + end, slave:stop(CTNode), ok. @@ -149,7 +152,10 @@ end_per_testcase(_TestCase, Config) -> case wait_for_ct_stop(CTNode) of %% Common test was not stopped to we restart node. false -> - cover:stop(CTNode), + case test_server:is_cover() of + true -> cover:flush(CTNode); + false -> ok + end, slave:stop(CTNode), start_slave(Config,proplists:get_value(trace_level,Config)), {fail, "Could not stop common_test"}; @@ -364,6 +370,14 @@ verify_events(TEvs, Evs, Config) -> ok end. +verify_events(TEvs, Evs, Node, Config) -> + case catch verify_events1(TEvs, Evs, Node, Config) of + {'EXIT',Reason} -> + Reason; + _ -> + ok + end. + verify_events1([TestEv|_], [{TEH,#event{name=stop_logging,node=Node,data=_}}|_], Node, _) when element(1,TestEv) == TEH, element(2,TestEv) =/= stop_logging -> test_server:format("Failed to find ~p in the list of events!~n", [TestEv]), @@ -612,8 +626,11 @@ locate({parallel,TEvs}, Node, Evs, Config) -> fun({EH,#event{name=tc_auto_skip, node=EvNode, data={Mod,end_per_group,Reason}}}) when - EH == TEH, EvNode == Node, Mod == M, Reason == R -> - false; + EH == TEH, EvNode == Node, Mod == M -> + case match_data(R, Reason) of + match -> false; + _ -> true + end; ({EH,#event{name=stop_logging, node=EvNode,data=_}}) when EH == TEH, EvNode == Node -> @@ -627,23 +644,12 @@ locate({parallel,TEvs}, Node, Evs, Config) -> [_AutoSkip | RemEvs2] -> {Done,RemEvs2,length(RemEvs2)} end; - %% match other event than test case - (TEv={TEH,N,D}, Acc) when D == '_' -> - case [E || E={EH,#event{name=Name, - node=EvNode, - data=_}} <- Evs1, - EH == TEH, EvNode == Node, Name == N] of - [] -> - exit({unmatched,TEv}); - _ -> - test_server:format("Found ~p!", [TEv]), - Acc - end; (TEv={TEH,N,D}, Acc) -> case [E || E={EH,#event{name=Name, node=EvNode, data=Data}} <- Evs1, - EH == TEH, EvNode == Node, Name == N, Data == D] of + EH == TEH, EvNode == Node, Name == N, + match == match_data(D,Data)] of [] -> exit({unmatched,TEv}); _ -> @@ -1002,33 +1008,39 @@ locate({TEH,Name,Data}, Node, [{TEH,#event{name=Name, data = EvData, node = Node}}|Evs], Config) -> - try match_data(Data, EvData) of + case match_data(Data, EvData) of match -> - {Config,Evs} - catch _:_ -> + {Config,Evs}; + _ -> nomatch end; locate({_TEH,_Name,_Data}, _Node, [_|_Evs], _Config) -> nomatch. -match_data(D,D) -> +match_data(Data, EvData) -> + try do_match_data(Data, EvData) + catch _:_ -> + nomatch + end. + +do_match_data(D,D) -> match; -match_data('_',_) -> +do_match_data('_',_) -> match; -match_data(Fun,Data) when is_function(Fun) -> +do_match_data(Fun,Data) when is_function(Fun) -> Fun(Data); -match_data('$proplist',Proplist) -> - match_data( +do_match_data('$proplist',Proplist) -> + do_match_data( fun(List) -> lists:foreach(fun({_,_}) -> ok end,List) end,Proplist); -match_data([H1|MatchT],[H2|ValT]) -> - match_data(H1,H2), - match_data(MatchT,ValT); -match_data(Tuple1,Tuple2) when is_tuple(Tuple1),is_tuple(Tuple2) -> - match_data(tuple_to_list(Tuple1),tuple_to_list(Tuple2)); -match_data([],[]) -> +do_match_data([H1|MatchT],[H2|ValT]) -> + do_match_data(H1,H2), + do_match_data(MatchT,ValT); +do_match_data(Tuple1,Tuple2) when is_tuple(Tuple1),is_tuple(Tuple2) -> + do_match_data(tuple_to_list(Tuple1),tuple_to_list(Tuple2)); +do_match_data([],[]) -> match. result_match({SkipOrFail,{ErrorInd,{Why,'_'}}}, @@ -1043,6 +1055,9 @@ result_match({failed,{timetrap_timeout,{'$approx',Num}}}, Value =< trunc(Num+0.02*Num) -> true; true -> false end; +result_match({user_timetrap_error,{Why,'_'}}, + {user_timetrap_error,{Why,_Stack}}) -> + true; result_match(Result, Result) -> true; result_match(_, _) -> diff --git a/lib/common_test/vsn.mk b/lib/common_test/vsn.mk index 5c9fdfc47e..f9bb22867e 100644 --- a/lib/common_test/vsn.mk +++ b/lib/common_test/vsn.mk @@ -1 +1 @@ -COMMON_TEST_VSN = 1.6.2.1 +COMMON_TEST_VSN = 1.6.3 diff --git a/lib/compiler/src/beam_bsm.erl b/lib/compiler/src/beam_bsm.erl index 37053e1cc4..02794a8e18 100644 --- a/lib/compiler/src/beam_bsm.erl +++ b/lib/compiler/src/beam_bsm.erl @@ -241,21 +241,45 @@ btb_reaches_match_2([{bif,_,{f,F},Ss,Dst}=I|Is], Regs0, D0) -> Regs = btb_kill([Dst], Regs0), D = btb_follow_branch(F, Regs, D0), btb_reaches_match_1(Is, Regs, D); -btb_reaches_match_2([{test,bs_start_match2,_,_,[Ctx,_],Ctx}|Is], Regs, D) -> - case btb_context_regs(Regs) of - [Ctx] -> - D; - CtxRegs -> - case member(Ctx, CtxRegs) of - false -> btb_reaches_match_2(Is, Regs, D); - true -> btb_error(unsuitable_bs_start_match) +btb_reaches_match_2([{test,bs_start_match2,{f,F},Live,[Ctx,_],Ctx}=I|Is], + Regs0, D0) -> + CtxRegs = btb_context_regs(Regs0), + case member(Ctx, CtxRegs) of + false -> + %% This bs_start_match2 instruction does not use "our" + %% match state. Therefore we can continue the search + %% for another bs_start_match2 instruction. + D = btb_follow_branch(F, Regs0, D0), + Regs = btb_kill_not_live(Live, Regs0), + btb_reaches_match_2(Is, Regs, D); + true -> + %% OK. This instruction will use "our" match state, + %% but we must make sure that all other copies of the + %% match state are killed in the code that follows + %% the instruction. (We know that the fail branch cannot + %% be taken in this case.) + OtherCtxRegs = CtxRegs -- [Ctx], + case btb_are_all_unused(OtherCtxRegs, Is, D0) of + false -> btb_error({OtherCtxRegs,not_all_unused_after,I}); + true -> D0 end end; -btb_reaches_match_2([{test,bs_start_match2,_,_,[Bin,_],Ctx}|Is], Regs, D) -> - CtxRegs = btb_context_regs(Regs), +btb_reaches_match_2([{test,bs_start_match2,{f,F},Live,[Bin,_],Ctx}|Is], + Regs0, D0) -> + CtxRegs = btb_context_regs(Regs0), case member(Bin, CtxRegs) orelse member(Ctx, CtxRegs) of - false -> btb_reaches_match_2(Is, Regs, D); - true -> btb_error(unsuitable_bs_start_match) + false -> + %% This bs_start_match2 does not reference any copy of the + %% match state. Therefore it can safely be passed on the + %% way to another (perhaps more suitable) bs_start_match2 + %% instruction. + D = btb_follow_branch(F, Regs0, D0), + Regs = btb_kill_not_live(Live, Regs0), + btb_reaches_match_2(Is, Regs, D); + true -> + %% This variant of the bs_start_match2 instruction does + %% not accept a match state as source. + btb_error(unsuitable_bs_start_match) end; btb_reaches_match_2([{test,_,{f,F},Ss}=I|Is], Regs, D0) -> btb_ensure_not_used(Ss, I, Regs), @@ -287,11 +311,11 @@ btb_reaches_match_2([{bs_restore2,Src,_}=I|Is], Regs0, D) -> btb_reaches_match_1(Is, Regs0, D); true -> %% Check that all other copies of the context registers - %% are killed by the following instructions. + %% are unused by the following instructions. Regs = btb_kill([Src], Regs0), CtxRegs = btb_context_regs(Regs), - case btb_are_all_killed(CtxRegs, Is, D) of - false -> btb_error({CtxRegs,not_all_killed_after,I}); + case btb_are_all_unused(CtxRegs, Is, D) of + false -> btb_error({CtxRegs,not_all_unused_after,I}); true -> D#btb{must_not_save=true} end end; @@ -301,11 +325,11 @@ btb_reaches_match_2([{bs_context_to_binary,Src}=I|Is], Regs0, D) -> btb_reaches_match_1(Is, Regs0, D); true -> %% Check that all other copies of the context registers - %% are killed by the following instructions. + %% are unused by the following instructions. Regs = btb_kill([Src], Regs0), CtxRegs = btb_context_regs(Regs), - case btb_are_all_killed(CtxRegs, Is, D) of - false -> btb_error({CtxRegs,not_all_killed_after,I}); + case btb_are_all_unused(CtxRegs, Is, D) of + false -> btb_error({CtxRegs,not_all_unused_after,I}); true -> D#btb{must_not_save=true} end end; @@ -343,7 +367,7 @@ btb_call(Arity, Lbl, Regs0, Is, D0) -> %% tucked away in a y register. RegList = btb_context_regs(Regs), YRegs = [R || {y,_}=R <- RegList], - case btb_are_all_killed(YRegs, Is, D) of + case btb_are_all_unused(YRegs, Is, D) of true -> D; false -> btb_error({multiple_uses,RegList}) end; @@ -426,11 +450,11 @@ btb_reaches_match_block([], Regs) -> Regs. %% btb_are_all_killed([Register], [Instruction], D) -> true|false -%% Test whether all of the register are killed in the instruction stream. +%% Test whether all of the register are unused in the instruction stream. -btb_are_all_killed(RegList, Is, #btb{index=Li}) -> +btb_are_all_unused(RegList, Is, #btb{index=Li}) -> all(fun(R) -> - beam_utils:is_killed(R, Is, Li) + beam_utils:is_not_used(R, Is, Li) end, RegList). %% btp_regs_from_list([Register]) -> RegisterSet. diff --git a/lib/compiler/src/beam_jump.erl b/lib/compiler/src/beam_jump.erl index b05d01b2a1..636c299e47 100644 --- a/lib/compiler/src/beam_jump.erl +++ b/lib/compiler/src/beam_jump.erl @@ -220,6 +220,8 @@ extract_seq([{line,_}=Line|Is], Acc) -> extract_seq(Is, [Line|Acc]); extract_seq([{block,_}=Bl|Is], Acc) -> extract_seq_1(Is, [Bl|Acc]); +extract_seq([{bs_context_to_binary,_}=I|Is], Acc) -> + extract_seq_1(Is, [I|Acc]); extract_seq([{label,_}|_]=Is, Acc) -> extract_seq_1(Is, Acc); extract_seq(_, _) -> no. diff --git a/lib/compiler/src/beam_utils.erl b/lib/compiler/src/beam_utils.erl index 8b661e6901..8af0447f63 100644 --- a/lib/compiler/src/beam_utils.erl +++ b/lib/compiler/src/beam_utils.erl @@ -263,19 +263,11 @@ check_liveness(R, [{test,_,{f,Fail},As}|Is], St0) -> {_,_}=Other -> Other end end; -check_liveness(R, [{test,_,{f,Fail},Live,Ss,_}|Is], St0) -> - case R of - {x,X} -> - case X < Live orelse member(R, Ss) of - true -> {used,St0}; - false -> check_liveness_at(R, Fail, St0) - end; - {y,_} -> - case check_liveness_at(R, Fail, St0) of - {killed,St} -> check_liveness(R, Is, St); - {_,_}=Other -> Other - end - end; +check_liveness(R, [{test,Op,Fail,Live,Ss,Dst}|Is], St) -> + %% Check this instruction as a block to get a less conservative + %% result if the caller is is_not_used/3. + Block = [{set,[Dst],Ss,{alloc,Live,{bif,Op,Fail}}}], + check_liveness(R, [{block,Block}|Is], St); check_liveness(R, [{select,_,R,_,_}|_], St) -> {used,St}; check_liveness(R, [{select,_,_,Fail,Branches}|_], St) -> diff --git a/lib/compiler/src/v3_codegen.erl b/lib/compiler/src/v3_codegen.erl index 3b73269545..6a13495523 100644 --- a/lib/compiler/src/v3_codegen.erl +++ b/lib/compiler/src/v3_codegen.erl @@ -379,6 +379,7 @@ bsm_rename_ctx(#l{ke={test,_,_}}=L, _, _, _) -> L; bsm_rename_ctx(#l{ke={bif,_,_,_}}=L, _, _, _) -> L; bsm_rename_ctx(#l{ke={gc_bif,_,_,_}}=L, _, _, _) -> L; bsm_rename_ctx(#l{ke={set,_,_}}=L, _, _, _) -> L; +bsm_rename_ctx(#l{ke={call,_,_,_}}=L, _, _, _) -> L; bsm_rename_ctx(#l{ke={block,_}}=L, Old, _, false) -> %% This block is not inside a protected. The match context variable cannot %% possibly be live inside the block. diff --git a/lib/compiler/test/bs_match_SUITE.erl b/lib/compiler/test/bs_match_SUITE.erl index 1bef409be0..d63d2235d7 100644 --- a/lib/compiler/test/bs_match_SUITE.erl +++ b/lib/compiler/test/bs_match_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2005-2011. All Rights Reserved. +%% Copyright Ericsson AB 2005-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -33,7 +33,7 @@ matching_meets_construction/1,simon/1,matching_and_andalso/1, otp_7188/1,otp_7233/1,otp_7240/1,otp_7498/1, match_string/1,zero_width/1,bad_size/1,haystack/1, - cover_beam_bool/1,matched_out_size/1]). + cover_beam_bool/1,matched_out_size/1,follow_fail_branch/1]). -export([coverage_id/1,coverage_external_ignore/2]). @@ -57,7 +57,7 @@ groups() -> matching_meets_construction,simon, matching_and_andalso,otp_7188,otp_7233,otp_7240, otp_7498,match_string,zero_width,bad_size,haystack, - cover_beam_bool,matched_out_size]}]. + cover_beam_bool,matched_out_size,follow_fail_branch]}]. init_per_suite(Config) -> @@ -802,12 +802,29 @@ matching_and_andalso(Config) when is_list(Config) -> ?line {'EXIT',{function_clause,_}} = (catch matching_and_andalso_1(<<1,2,3>>, -8)), ?line {'EXIT',{function_clause,_}} = (catch matching_and_andalso_1(<<1,2,3>>, blurf)), ?line {'EXIT',{function_clause,_}} = (catch matching_and_andalso_1(<<1,2,3>>, 19)), + + {"abc",<<"xyz">>} = matching_and_andalso_2("abc", <<"-xyz">>), + {"abc",<<"">>} = matching_and_andalso_2("abc", <<($a-1)>>), + {"abc",<<"">>} = matching_and_andalso_2("abc", <<($z+1)>>), + {"abc",<<"">>} = matching_and_andalso_2("abc", <<($A-1)>>), + {"abc",<<"">>} = matching_and_andalso_2("abc", <<($Z+1)>>), + error = matching_and_andalso_2([], <<>>), + error = matching_and_andalso_2([], <<$A>>), + error = matching_and_andalso_2([], <<$Z>>), + error = matching_and_andalso_2([], <<$a>>), + error = matching_and_andalso_2([], <<$z>>), ok. matching_and_andalso_1(<<Bitmap/binary>>, K) when is_integer(K) andalso size(Bitmap) >= K andalso 0 < K -> ok. +matching_and_andalso_2(Datetime, <<H,T/binary>>) + when not ((H >= $a) andalso (H =< $z)) andalso + not ((H >= $A) andalso (H =< $Z)) -> + {Datetime,T}; +matching_and_andalso_2(_, _) -> error. + %% Thanks to Tomas Stejskal. otp_7188(Config) when is_list(Config) -> MP3 = <<84,65,71,68,117,154,105,232,107,121,0,0,0,0,0,0,0,0,0,0, @@ -1091,6 +1108,32 @@ mos_bin(<<L,Bin:L/binary,"abcdefghij">>) -> L = byte_size(Bin), Bin. +follow_fail_branch(_) -> + 42 = ffb_1(<<0,1>>, <<0>>), + 8 = ffb_1(<<0,1>>, [a]), + 42 = ffb_2(<<0,1>>, <<0>>, 17), + 8 = ffb_2(<<0,1>>, [a], 0), + ok. + +ffb_1(<<_,T/bitstring>>, List) -> + case List of + <<_>> -> + 42; + [_|_] -> + %% The fail branch of the bs_start_match2 instruction + %% pointing to here would be ignored, making the compiler + %% incorrectly assume that the delayed sub-binary + %% optimization was safe. + bit_size(T) + end. + +ffb_2(<<_,T/bitstring>>, List, A) -> + case List of + <<_>> when A =:= 17 -> 42; + [_|_] -> bit_size(T) + end. + + check(F, R) -> R = F(). diff --git a/lib/compiler/test/receive_SUITE.erl b/lib/compiler/test/receive_SUITE.erl index 55aaa0e5d9..82c823b789 100644 --- a/lib/compiler/test/receive_SUITE.erl +++ b/lib/compiler/test/receive_SUITE.erl @@ -43,8 +43,8 @@ all() -> [{group,p}]. groups() -> - {p,test_lib:parallel(), - [recv,coverage,otp_7980,ref_opt,export]}. + [{p,test_lib:parallel(), + [recv,coverage,otp_7980,ref_opt,export]}]. init_per_suite(Config) -> diff --git a/lib/crypto/c_src/Makefile.in b/lib/crypto/c_src/Makefile.in index ffd556ca1a..e19d6617f3 100644 --- a/lib/crypto/c_src/Makefile.in +++ b/lib/crypto/c_src/Makefile.in @@ -59,8 +59,6 @@ TYPE_FLAGS = $(CFLAGS) endif endif -ALL_CFLAGS = $(TYPE_FLAGS) $(INCLUDES) - # ---------------------------------------------------- # Release directory specification # ---------------------------------------------------- @@ -69,13 +67,16 @@ RELSYSDIR = $(RELEASE_PATH)/lib/crypto-$(VSN) # ---------------------------------------------------- # Misc Macros # ---------------------------------------------------- -OBJS = $(OBJDIR)/crypto$(TYPEMARKER).o +CRYPTO_OBJS = $(OBJDIR)/crypto$(TYPEMARKER).o +CALLBACK_OBJS = $(OBJDIR)/crypto_callback$(TYPEMARKER).o NIF_MAKEFILE = $(PRIVDIR)/Makefile ifeq ($(findstring win32,$(TARGET)), win32) NIF_LIB = $(LIBDIR)/crypto$(TYPEMARKER).dll +CALLBACK_LIB = $(LIBDIR)/crypto_callback$(TYPEMARKER).dll else NIF_LIB = $(LIBDIR)/crypto$(TYPEMARKER).so +CALLBACK_LIB = $(LIBDIR)/crypto_callback$(TYPEMARKER).so endif ifeq ($(HOST_OS),) @@ -86,43 +87,69 @@ DYNAMIC_CRYPTO_LIB=@SSL_DYNAMIC_ONLY@ ifeq ($(DYNAMIC_CRYPTO_LIB),yes) SSL_DED_LD_RUNTIME_LIBRARY_PATH = @SSL_DED_LD_RUNTIME_LIBRARY_PATH@ CRYPTO_LINK_LIB=$(SSL_DED_LD_RUNTIME_LIBRARY_PATH) -L$(SSL_LIBDIR) -l$(SSL_CRYPTO_LIBNAME) +EXTRA_FLAGS = -DHAVE_DYNAMIC_CRYPTO_LIB else SSL_DED_LD_RUNTIME_LIBRARY_PATH= CRYPTO_LINK_LIB=$(SSL_LIBDIR)/lib$(SSL_CRYPTO_LIBNAME).a +EXTRA_FLAGS = +CRYPTO_OBJS := $(CRYPTO_OBJS) $(CALLBACK_OBJS) +CALLBACK_OBJS = +CALLBACK_LIB = endif +ALL_CFLAGS = $(TYPE_FLAGS) $(EXTRA_FLAGS) $(INCLUDES) + # ---------------------------------------------------- # Targets # ---------------------------------------------------- _create_dirs := $(shell mkdir -p $(OBJDIR) $(LIBDIR)) -debug opt valgrind: $(NIF_LIB) +debug opt valgrind: $(NIF_LIB) $(CALLBACK_LIB) $(OBJDIR)/%$(TYPEMARKER).o: %.c $(INSTALL_DIR) $(OBJDIR) $(CC) -c -o $@ $(ALL_CFLAGS) $< -$(LIBDIR)/crypto$(TYPEMARKER).so: $(OBJS) - $(INSTALL_DIR) $(LIBDIR) +$(LIBDIR)/crypto$(TYPEMARKER).so: $(CRYPTO_OBJS) + $(INSTALL_DIR) $(LIBDIR) $(LD) $(LDFLAGS) -o $@ $^ $(LDLIBS) $(CRYPTO_LINK_LIB) -$(LIBDIR)/crypto$(TYPEMARKER).dll: $(OBJS) +$(LIBDIR)/crypto$(TYPEMARKER).dll: $(CRYPTO_OBJS) + $(INSTALL_DIR) $(LIBDIR) + $(LD) $(LDFLAGS) -o $@ $(SSL_DED_LD_RUNTIME_LIBRARY_PATH) -L$(SSL_LIBDIR) $(CRYPTO_OBJS) -l$(SSL_CRYPTO_LIBNAME) -l$(SSL_SSL_LIBNAME) + +ifeq ($(DYNAMIC_CRYPTO_LIB),yes) +$(LIBDIR)/crypto_callback$(TYPEMARKER).so: $(CALLBACK_OBJS) + $(INSTALL_DIR) $(LIBDIR) + $(LD) $(LDFLAGS) -o $@ $^ $(LDLIBS) + +$(LIBDIR)/crypto_callback$(TYPEMARKER).dll: $(CALLBACK_OBJS) $(INSTALL_DIR) $(LIBDIR) - $(LD) $(LDFLAGS) -o $@ $(SSL_DED_LD_RUNTIME_LIBRARY_PATH) -L$(SSL_LIBDIR) $(OBJS) -l$(SSL_CRYPTO_LIBNAME) -l$(SSL_SSL_LIBNAME) + $(LD) $(LDFLAGS) -o $@ $(CALLBACK_OBJS) +endif + clean: ifeq ($(findstring win32,$(TARGET)), win32) rm -f $(LIBDIR)/crypto.dll rm -f $(LIBDIR)/crypto.debug.dll + rm -f $(LIBDIR)/crypto_callback.dll + rm -f $(LIBDIR)/crypto_callback.debug.dll else rm -f $(LIBDIR)/crypto.so rm -f $(LIBDIR)/crypto.debug.so rm -f $(LIBDIR)/crypto.valgrind.so + rm -f $(LIBDIR)/crypto_callback.so + rm -f $(LIBDIR)/crypto_callback.debug.so + rm -f $(LIBDIR)/crypto_callback.valgrind.so endif rm -f $(OBJDIR)/crypto.o rm -f $(OBJDIR)/crypto.debug.o rm -f $(OBJDIR)/crypto.valgrind.o + rm -f $(OBJDIR)/crypto_callback.o + rm -f $(OBJDIR)/crypto_callback.debug.o + rm -f $(OBJDIR)/crypto_callback.valgrind.o rm -f core *~ docs: @@ -136,8 +163,12 @@ release_spec: opt $(INSTALL_DIR) "$(RELSYSDIR)/priv/obj" $(INSTALL_DIR) "$(RELSYSDIR)/priv/lib" $(INSTALL_DATA) $(NIF_MAKEFILE) "$(RELSYSDIR)/priv/obj" - $(INSTALL_PROGRAM) $(OBJS) "$(RELSYSDIR)/priv/obj" + $(INSTALL_PROGRAM) $(CRYPTO_OBJS) "$(RELSYSDIR)/priv/obj" $(INSTALL_PROGRAM) $(NIF_LIB) "$(RELSYSDIR)/priv/lib" +ifeq ($(DYNAMIC_CRYPTO_LIB),yes) + $(INSTALL_PROGRAM) $(CALLBACK_OBJS) "$(RELSYSDIR)/priv/obj" + $(INSTALL_PROGRAM) $(CALLBACK_LIB) "$(RELSYSDIR)/priv/lib" +endif release_docs_spec: diff --git a/lib/crypto/c_src/crypto.c b/lib/crypto/c_src/crypto.c index 91ab244620..72c9e5b8e8 100644 --- a/lib/crypto/c_src/crypto.c +++ b/lib/crypto/c_src/crypto.c @@ -53,6 +53,8 @@ #include <openssl/evp.h> #include <openssl/hmac.h> +#include "crypto_callback.h" + #if OPENSSL_VERSION_NUMBER >= 0x00908000L && !defined(OPENSSL_NO_SHA224) && defined(NID_sha224)\ && !defined(OPENSSL_NO_SHA256) /* disabled like this in my sha.h (?) */ # define HAVE_SHA224 @@ -67,6 +69,9 @@ #if OPENSSL_VERSION_NUMBER >= 0x00908000L && !defined(OPENSSL_NO_SHA512) && defined(NID_sha512) # define HAVE_SHA512 #endif +#if OPENSSL_VERSION_NUMBER >= 0x0090705FL +# define HAVE_DES_ede3_cfb_encrypt +#endif #ifdef VALGRIND # include <valgrind/memcheck.h> @@ -125,7 +130,6 @@ /* NIF interface declarations */ static int load(ErlNifEnv* env, void** priv_data, ERL_NIF_TERM load_info); -static int reload(ErlNifEnv* env, void** priv_data, ERL_NIF_TERM load_info); static int upgrade(ErlNifEnv* env, void** priv_data, void** old_priv_data, ERL_NIF_TERM load_info); static void unload(ErlNifEnv* env, void* priv_data); @@ -172,7 +176,7 @@ static ERL_NIF_TERM des_cbc_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM a static ERL_NIF_TERM des_cfb_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]); static ERL_NIF_TERM des_ecb_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]); static ERL_NIF_TERM des_ede3_cbc_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]); -static ERL_NIF_TERM des_ede3_cfb_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]); +static ERL_NIF_TERM des_ede3_cfb_crypt_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]); static ERL_NIF_TERM aes_cfb_128_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]); static ERL_NIF_TERM aes_ctr_encrypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]); static ERL_NIF_TERM aes_ctr_stream_encrypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]); @@ -204,17 +208,6 @@ static ERL_NIF_TERM bf_ecb_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM ar static ERL_NIF_TERM blowfish_ofb64_encrypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]); -/* openssl callbacks */ -#ifdef OPENSSL_THREADS -static void locking_function(int mode, int n, const char *file, int line); -static unsigned long id_function(void); -static struct CRYPTO_dynlock_value* dyn_create_function(const char *file, - int line); -static void dyn_lock_function(int mode, struct CRYPTO_dynlock_value* ptr, - const char *file, int line); -static void dyn_destroy_function(struct CRYPTO_dynlock_value *ptr, - const char *file, int line); -#endif /* OPENSSL_THREADS */ /* helpers */ static void init_digest_types(ErlNifEnv* env); @@ -291,7 +284,7 @@ static ErlNifFunc nif_funcs[] = { {"des_cfb_crypt", 4, des_cfb_crypt}, {"des_ecb_crypt", 3, des_ecb_crypt}, {"des_ede3_cbc_crypt", 6, des_ede3_cbc_crypt}, - {"des_ede3_cfb_crypt", 6, des_ede3_cfb_crypt}, + {"des_ede3_cfb_crypt_nif", 6, des_ede3_cfb_crypt_nif}, {"aes_cfb_128_crypt", 4, aes_cfb_128_crypt}, {"aes_ctr_encrypt", 3, aes_ctr_encrypt}, {"aes_ctr_decrypt", 3, aes_ctr_encrypt}, @@ -325,7 +318,7 @@ static ErlNifFunc nif_funcs[] = { {"blowfish_ofb64_encrypt", 3, blowfish_ofb64_encrypt} }; -ERL_NIF_INIT(crypto,nif_funcs,load,reload,upgrade,unload) +ERL_NIF_INIT(crypto,nif_funcs,load,NULL,upgrade,unload) #define MD5_CTX_LEN (sizeof(MD5_CTX)) @@ -347,7 +340,6 @@ ERL_NIF_INIT(crypto,nif_funcs,load,reload,upgrade,unload) #define HMAC_OPAD 0x5c -static ErlNifRWLock** lock_vec = NULL; /* Static locks used by openssl */ static ERL_NIF_TERM atom_true; static ERL_NIF_TERM atom_false; static ERL_NIF_TERM atom_sha; @@ -374,55 +366,60 @@ static ERL_NIF_TERM atom_none; static ERL_NIF_TERM atom_notsup; static ERL_NIF_TERM atom_digest; +/* +#define PRINTF_ERR0(FMT) enif_fprintf(stderr, FMT "\n") +#define PRINTF_ERR1(FMT, A1) enif_fprintf(stderr, FMT "\n", A1) +*/ +#define PRINTF_ERR0(FMT) +#define PRINTF_ERR1(FMT,A1) -static int is_ok_load_info(ErlNifEnv* env, ERL_NIF_TERM load_info) +#ifdef HAVE_DYNAMIC_CRYPTO_LIB +static int change_basename(char* buf, int bufsz, const char* newfile) { - int i; - return enif_get_int(env,load_info,&i) && i == 101; -} -static void* crypto_alloc(size_t size) -{ - return enif_alloc(size); + char* p = strrchr(buf, '/'); + p = (p == NULL) ? buf : p + 1; + + if ((p - buf) + strlen(newfile) >= bufsz) { + PRINTF_ERR0("CRYPTO: lib name too long"); + return 0; + } + strcpy(p, newfile); + return 1; } -static void* crypto_realloc(void* ptr, size_t size) + +static void error_handler(void* null, const char* errstr) { - return enif_realloc(ptr, size); -} -static void crypto_free(void* ptr) -{ - enif_free(ptr); + PRINTF_ERR1("CRYPTO LOADING ERROR: '%s'", errstr); } +#endif /* HAVE_DYNAMIC_CRYPTO_LIB */ -static int load(ErlNifEnv* env, void** priv_data, ERL_NIF_TERM load_info) +static int init(ErlNifEnv* env, ERL_NIF_TERM load_info) { ErlNifSysInfo sys_info; - CRYPTO_set_mem_functions(crypto_alloc, crypto_realloc, crypto_free); - - if (!is_ok_load_info(env, load_info)) { - return -1; + get_crypto_callbacks_t* funcp; + struct crypto_callbacks* ccb; + int nlocks = 0; + int tpl_arity; + const ERL_NIF_TERM* tpl_array; + int vernum; + char lib_buf[1000]; + + /* load_info: {201, "/full/path/of/this/library"} */ + if (!enif_get_tuple(env, load_info, &tpl_arity, &tpl_array) + || tpl_arity != 2 + || !enif_get_int(env, tpl_array[0], &vernum) + || vernum != 201 + || enif_get_string(env, tpl_array[1], lib_buf, sizeof(lib_buf), ERL_NIF_LATIN1) <= 0) { + + PRINTF_ERR1("CRYPTO: Invalid load_info '%T'", load_info); + return 0; } - -#ifdef OPENSSL_THREADS - enif_system_info(&sys_info, sizeof(sys_info)); - - if (sys_info.scheduler_threads > 1) { - int i; - lock_vec = enif_alloc(CRYPTO_num_locks()*sizeof(*lock_vec)); - if (lock_vec==NULL) return -1; - memset(lock_vec,0,CRYPTO_num_locks()*sizeof(*lock_vec)); - - for (i=CRYPTO_num_locks()-1; i>=0; --i) { - lock_vec[i] = enif_rwlock_create("crypto_stat"); - if (lock_vec[i]==NULL) return -1; - } - CRYPTO_set_locking_callback(locking_function); - CRYPTO_set_id_callback(id_function); - CRYPTO_set_dynlock_create_callback(dyn_create_function); - CRYPTO_set_dynlock_lock_callback(dyn_lock_function); - CRYPTO_set_dynlock_destroy_callback(dyn_destroy_function); + if (library_refc > 0) { + /* Repeated loading of this library (module upgrade). + * Atoms and callbacks are already set, we are done. + */ + return 1; } - /* else no need for locks */ -#endif /* OPENSSL_THREADS */ atom_true = enif_make_atom(env,"true"); atom_false = enif_make_atom(env,"false"); @@ -451,37 +448,75 @@ static int load(ErlNifEnv* env, void** priv_data, ERL_NIF_TERM load_info) init_digest_types(env); - *priv_data = NULL; - library_refc++; - return 0; -} - -static int reload(ErlNifEnv* env, void** priv_data, ERL_NIF_TERM load_info) -{ - if (*priv_data != NULL) { - return -1; /* Don't know how to do that */ +#ifdef HAVE_DYNAMIC_CRYPTO_LIB + { + void* handle; + if (!change_basename(lib_buf, sizeof(lib_buf), "crypto_callback")) { + return 0; + } + if (!(handle = enif_dlopen(lib_buf, &error_handler, NULL))) { + return 0; + } + if (!(funcp = (get_crypto_callbacks_t*) enif_dlsym(handle, "get_crypto_callbacks", + &error_handler, NULL))) { + return 0; + } } - if (library_refc == 0) { - /* No support for real library upgrade. The tricky thing is to know - when to (re)set the callbacks for allocation and locking. */ - return -2; +#else /* !HAVE_DYNAMIC_CRYPTO_LIB */ + funcp = &get_crypto_callbacks; +#endif + +#ifdef OPENSSL_THREADS + enif_system_info(&sys_info, sizeof(sys_info)); + if (sys_info.scheduler_threads > 1) { + nlocks = CRYPTO_num_locks(); } - if (!is_ok_load_info(env, load_info)) { + /* else no need for locks */ +#endif + + ccb = (*funcp)(nlocks); + + if (!ccb || ccb->sizeof_me != sizeof(*ccb)) { + PRINTF_ERR0("Invalid 'crypto_callbacks'"); + return 0; + } + + CRYPTO_set_mem_functions(ccb->crypto_alloc, ccb->crypto_realloc, ccb->crypto_free); + +#ifdef OPENSSL_THREADS + if (nlocks > 0) { + CRYPTO_set_locking_callback(ccb->locking_function); + CRYPTO_set_id_callback(ccb->id_function); + CRYPTO_set_dynlock_create_callback(ccb->dyn_create_function); + CRYPTO_set_dynlock_lock_callback(ccb->dyn_lock_function); + CRYPTO_set_dynlock_destroy_callback(ccb->dyn_destroy_function); + } +#endif /* OPENSSL_THREADS */ + return 1; +} + +static int load(ErlNifEnv* env, void** priv_data, ERL_NIF_TERM load_info) +{ + if (!init(env, load_info)) { return -1; } - return 0; + + *priv_data = NULL; + library_refc++; + return 0; } static int upgrade(ErlNifEnv* env, void** priv_data, void** old_priv_data, ERL_NIF_TERM load_info) { - int i; if (*old_priv_data != NULL) { return -1; /* Don't know how to do that */ } - i = reload(env,priv_data,load_info); - if (i != 0) { - return i; + if (*priv_data != NULL) { + return -1; /* Don't know how to do that */ + } + if (!init(env, load_info)) { + return -1; } library_refc++; return 0; @@ -489,20 +524,7 @@ static int upgrade(ErlNifEnv* env, void** priv_data, void** old_priv_data, static void unload(ErlNifEnv* env, void* priv_data) { - if (--library_refc <= 0) { - CRYPTO_cleanup_all_ex_data(); - - if (lock_vec != NULL) { - int i; - for (i=CRYPTO_num_locks()-1; i>=0; --i) { - if (lock_vec[i] != NULL) { - enif_rwlock_destroy(lock_vec[i]); - } - } - enif_free(lock_vec); - } - } - /*else NIF library still used by other (new) module code */ + --library_refc; } static ERL_NIF_TERM info_lib(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) @@ -514,12 +536,21 @@ static ERL_NIF_TERM info_lib(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[] const char* ver = SSLeay_version(SSLEAY_VERSION); unsigned ver_sz = strlen(ver); ERL_NIF_TERM name_term, ver_term; + int ver_num = OPENSSL_VERSION_NUMBER; + /* R16: + * Ignore library version number from SSLeay() and instead show header + * version. Otherwise user might try to call a function that is implemented + * by a newer library but not supported by the headers used at compile time. + * Example: DES_ede3_cfb_encrypt in 0.9.7i but not in 0.9.7d. + * + * Version string is still from library though. + */ memcpy(enif_make_new_binary(env, name_sz, &name_term), libname, name_sz); memcpy(enif_make_new_binary(env, ver_sz, &ver_term), ver, ver_sz); return enif_make_list1(env, enif_make_tuple3(env, name_term, - enif_make_int(env, SSLeay()), + enif_make_int(env, ver_num), ver_term)); } @@ -1199,8 +1230,9 @@ static ERL_NIF_TERM des_ede3_cbc_crypt(ErlNifEnv* env, int argc, const ERL_NIF_T return ret; } -static ERL_NIF_TERM des_ede3_cfb_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) +static ERL_NIF_TERM des_ede3_cfb_crypt_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) {/* (Key1, Key2, Key3, IVec, Text/Cipher, IsEncrypt) */ +#ifdef HAVE_DES_ede3_cfb_encrypt ErlNifBinary key1, key2, key3, ivec, text; DES_key_schedule schedule1, schedule2, schedule3; DES_cblock ivec_clone; /* writable copy */ @@ -1222,6 +1254,9 @@ static ERL_NIF_TERM des_ede3_cfb_crypt(ErlNifEnv* env, int argc, const ERL_NIF_T 8, text.size, &schedule1, &schedule2, &schedule3, &ivec_clone, (argv[5] == atom_true)); return ret; +#else + return atom_notsup; +#endif } static ERL_NIF_TERM aes_cfb_128_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) @@ -2338,59 +2373,6 @@ static ERL_NIF_TERM blowfish_ofb64_encrypt(ErlNifEnv* env, int argc, const ERL_N -#ifdef OPENSSL_THREADS /* vvvvvvvvvvvvvvv OPENSSL_THREADS vvvvvvvvvvvvvvvv */ - -static INLINE void locking(int mode, ErlNifRWLock* lock) -{ - switch (mode) { - case CRYPTO_LOCK|CRYPTO_READ: - enif_rwlock_rlock(lock); - break; - case CRYPTO_LOCK|CRYPTO_WRITE: - enif_rwlock_rwlock(lock); - break; - case CRYPTO_UNLOCK|CRYPTO_READ: - enif_rwlock_runlock(lock); - break; - case CRYPTO_UNLOCK|CRYPTO_WRITE: - enif_rwlock_rwunlock(lock); - break; - default: - ASSERT(!"Invalid lock mode"); - } -} - -/* Callback from openssl for static locking - */ -static void locking_function(int mode, int n, const char *file, int line) -{ - ASSERT(n>=0 && n<CRYPTO_num_locks()); - - locking(mode, lock_vec[n]); -} - -/* Callback from openssl for thread id - */ -static unsigned long id_function(void) -{ - return(unsigned long) enif_thread_self(); -} - -/* Callbacks for dynamic locking, not used by current openssl version (0.9.8) - */ -static struct CRYPTO_dynlock_value* dyn_create_function(const char *file, int line) { - return(struct CRYPTO_dynlock_value*) enif_rwlock_create("crypto_dyn"); -} -static void dyn_lock_function(int mode, struct CRYPTO_dynlock_value* ptr,const char *file, int line) -{ - locking(mode, (ErlNifRWLock*)ptr); -} -static void dyn_destroy_function(struct CRYPTO_dynlock_value *ptr, const char *file, int line) -{ - enif_rwlock_destroy((ErlNifRWLock*)ptr); -} - -#endif /* ^^^^^^^^^^^^^^^^^^^^^^ OPENSSL_THREADS ^^^^^^^^^^^^^^^^^^^^^^ */ /* HMAC */ diff --git a/lib/crypto/c_src/crypto_callback.c b/lib/crypto/c_src/crypto_callback.c new file mode 100644 index 0000000000..81106b4cc2 --- /dev/null +++ b/lib/crypto/c_src/crypto_callback.c @@ -0,0 +1,165 @@ +/* + * %CopyrightBegin% + * + * Copyright Ericsson AB 2012. All Rights Reserved. + * + * The contents of this file are subject to the Erlang Public License, + * Version 1.1, (the "License"); you may not use this file except in + * compliance with the License. You should have received a copy of the + * Erlang Public License along with this software. If not, it can be + * retrieved online at http://www.erlang.org/. + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and limitations + * under the License. + * + * %CopyrightEnd% + */ + +#include <string.h> +#include <openssl/opensslconf.h> + +#include "erl_nif.h" +#include "crypto_callback.h" + +#ifdef DEBUG + # define ASSERT(e) \ + ((void) ((e) ? 1 : (fprintf(stderr,"Assert '%s' failed at %s:%d\n",\ + #e, __FILE__, __LINE__), abort(), 0))) +#else + # define ASSERT(e) ((void) 1) +#endif + +#ifdef __GNUC__ + # define INLINE __inline__ +#elif defined(__WIN32__) + # define INLINE __forceinline +#else + # define INLINE +#endif + +#ifdef __WIN32__ +# define DLLEXPORT __declspec(dllexport) +#else +# define DLLEXPORT +#endif + +/* to be dlsym'ed */ +DLLEXPORT struct crypto_callbacks* get_crypto_callbacks(int nlocks); + + +static ErlNifRWLock** lock_vec = NULL; /* Static locks used by openssl */ + +static void* crypto_alloc(size_t size) +{ + return enif_alloc(size); +} +static void* crypto_realloc(void* ptr, size_t size) +{ + return enif_realloc(ptr, size); +} +static void crypto_free(void* ptr) +{ + enif_free(ptr); +} + + +#ifdef OPENSSL_THREADS /* vvvvvvvvvvvvvvv OPENSSL_THREADS vvvvvvvvvvvvvvvv */ + +#include <openssl/crypto.h> + +static INLINE void locking(int mode, ErlNifRWLock* lock) +{ + switch (mode) { + case CRYPTO_LOCK|CRYPTO_READ: + enif_rwlock_rlock(lock); + break; + case CRYPTO_LOCK|CRYPTO_WRITE: + enif_rwlock_rwlock(lock); + break; + case CRYPTO_UNLOCK|CRYPTO_READ: + enif_rwlock_runlock(lock); + break; + case CRYPTO_UNLOCK|CRYPTO_WRITE: + enif_rwlock_rwunlock(lock); + break; + default: + ASSERT(!"Invalid lock mode"); + } +} + +static void locking_function(int mode, int n, const char *file, int line) +{ + ASSERT(n>=0 && n<CRYPTO_num_locks()); + + locking(mode, lock_vec[n]); +} + +static unsigned long id_function(void) +{ + return (unsigned long) enif_thread_self(); +} + +/* Dynamic locking, not used by current openssl version (0.9.8) + */ +static struct CRYPTO_dynlock_value* dyn_create_function(const char *file, int line) +{ + return (struct CRYPTO_dynlock_value*) enif_rwlock_create("crypto_dyn"); +} +static void dyn_lock_function(int mode, struct CRYPTO_dynlock_value* ptr,const char *file, int line) +{ + locking(mode, (ErlNifRWLock*)ptr); +} +static void dyn_destroy_function(struct CRYPTO_dynlock_value *ptr, const char *file, int line) +{ + enif_rwlock_destroy((ErlNifRWLock*)ptr); +} + +#endif /* ^^^^^^^^^^^^^^^^^^^^^^ OPENSSL_THREADS ^^^^^^^^^^^^^^^^^^^^^^ */ + +DLLEXPORT struct crypto_callbacks* get_crypto_callbacks(int nlocks) +{ + static int is_initialized = 0; + static struct crypto_callbacks the_struct = { + sizeof(struct crypto_callbacks), + + &crypto_alloc, + &crypto_realloc, + &crypto_free, + +#ifdef OPENSSL_THREADS + &locking_function, + &id_function, + &dyn_create_function, + &dyn_lock_function, + &dyn_destroy_function +#endif /* OPENSSL_THREADS */ + }; + + if (!is_initialized) { +#ifdef OPENSSL_THREADS + if (nlocks > 0) { + int i; + lock_vec = enif_alloc(nlocks*sizeof(*lock_vec)); + if (lock_vec==NULL) return NULL; + memset(lock_vec, 0, nlocks*sizeof(*lock_vec)); + + for (i=nlocks-1; i>=0; --i) { + lock_vec[i] = enif_rwlock_create("crypto_stat"); + if (lock_vec[i]==NULL) return NULL; + } + } +#endif + is_initialized = 1; + } + return &the_struct; +} + +#ifdef HAVE_DYNAMIC_CRYPTO_LIB +/* This is not really a NIF library, but we use ERL_NIF_INIT in order to + * get access to the erl_nif API (on Windows). + */ +ERL_NIF_INIT(dummy, (ErlNifFunc*)NULL , NULL, NULL, NULL, NULL) +#endif + diff --git a/lib/crypto/c_src/crypto_callback.h b/lib/crypto/c_src/crypto_callback.h new file mode 100644 index 0000000000..23ecba3e5d --- /dev/null +++ b/lib/crypto/c_src/crypto_callback.h @@ -0,0 +1,46 @@ +/* + * %CopyrightBegin% + * + * Copyright Ericsson AB 2012. All Rights Reserved. + * + * The contents of this file are subject to the Erlang Public License, + * Version 1.1, (the "License"); you may not use this file except in + * compliance with the License. You should have received a copy of the + * Erlang Public License along with this software. If not, it can be + * retrieved online at http://www.erlang.org/. + * + * Software distributed under the License is distributed on an "AS IS" + * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + * the License for the specific language governing rights and limitations + * under the License. + * + * %CopyrightEnd% + */ + +struct crypto_callbacks +{ + size_t sizeof_me; + + void* (*crypto_alloc)(size_t size); + void* (*crypto_realloc)(void* ptr, size_t size); + void (*crypto_free)(void* ptr); + + /* openssl callbacks */ + #ifdef OPENSSL_THREADS + void (*locking_function)(int mode, int n, const char *file, int line); + unsigned long (*id_function)(void); + struct CRYPTO_dynlock_value* (*dyn_create_function)(const char *file, + int line); + void (*dyn_lock_function)(int mode, struct CRYPTO_dynlock_value* ptr, + const char *file, int line); + void (*dyn_destroy_function)(struct CRYPTO_dynlock_value *ptr, + const char *file, int line); + #endif /* OPENSSL_THREADS */ +}; + +typedef struct crypto_callbacks* get_crypto_callbacks_t(int nlocks); + +#ifndef HAVE_DYNAMIC_CRYPTO_LIB +struct crypto_callbacks* get_crypto_callbacks(int nlocks); +#endif + diff --git a/lib/crypto/doc/src/crypto.xml b/lib/crypto/doc/src/crypto.xml index 4dcd6fc4ea..3e533158c8 100644 --- a/lib/crypto/doc/src/crypto.xml +++ b/lib/crypto/doc/src/crypto.xml @@ -115,6 +115,12 @@ Mpint() = <![CDATA[<<ByteLen:32/integer-big, Bytes:ByteLen/binary>>]]> > <input>info_lib().</input> [{<<"OpenSSL">>,9469983,<<"OpenSSL 0.9.8a 11 Oct 2005">>}] </pre> + <note><p> + From OTP R16 the <em>numeric version</em> represents the version of the OpenSSL + <em>header files</em> (<c>openssl/opensslv.h</c>) used when crypto was compiled. + The text variant represents the OpenSSL library used at runtime. + In earlier OTP versions both numeric and text was taken from the library. + </p></note> </desc> </func> <func> @@ -265,6 +271,8 @@ Mpint() = <![CDATA[<<ByteLen:32/integer-big, Bytes:ByteLen/binary>>]]> </type> <desc> <p>Computes a message digest of type <c>Type</c> from <c>Data</c>.</p> + <p>May throw exception <c>notsup</c> in case the chosen <c>Type</c> + is not supported by the underlying OpenSSL implementation.</p> </desc> </func> <func> @@ -277,6 +285,8 @@ Mpint() = <![CDATA[<<ByteLen:32/integer-big, Bytes:ByteLen/binary>>]]> <p>Initializes the context for streaming hash operations. <c>Type</c> determines which digest to use. The returned context should be used as argument to <seealso marker="#hash_update/2">hash_update</seealso>.</p> + <p>May throw exception <c>notsup</c> in case the chosen <c>Type</c> + is not supported by the underlying OpenSSL implementation.</p> </desc> </func> <func> @@ -548,6 +558,8 @@ Mpint() = <![CDATA[<<ByteLen:32/integer-big, Bytes:ByteLen/binary>>]]> keys, and <c>IVec</c> is an arbitrary initializing vector. The lengths of each of <c>Key1</c>, <c>Key2</c>, <c>Key3</c> and <c>IVec</c> must be 64 bits (8 bytes).</p> + <p>May throw exception <c>notsup</c> for old OpenSSL + versions (0.9.7) that does not support this encryption mode.</p> </desc> </func> <func> @@ -565,6 +577,8 @@ Mpint() = <![CDATA[<<ByteLen:32/integer-big, Bytes:ByteLen/binary>>]]> and <c>IVec</c> must have the same values as those used when encrypting. The lengths of <c>Key1</c>, <c>Key2</c>, <c>Key3</c>, and <c>IVec</c> must be 64 bits (8 bytes).</p> + <p>May throw exception <c>notsup</c> for old OpenSSL + versions (0.9.7) that does not support this encryption mode.</p> </desc> </func> diff --git a/lib/crypto/doc/src/crypto_app.xml b/lib/crypto/doc/src/crypto_app.xml index 1c01e3f099..6573a56f4c 100644 --- a/lib/crypto/doc/src/crypto_app.xml +++ b/lib/crypto/doc/src/crypto_app.xml @@ -62,7 +62,7 @@ <section> <title>OpenSSL libraries</title> <p>The current implementation of the Erlang Crypto application is - based on the <em>OpenSSL</em> package version 0.9.7 or higher. + based on the <em>OpenSSL</em> package version 0.9.8 or higher. There are source and binary releases on the web. </p> <p>Source releases of OpenSSL can be downloaded from the <url href="http://www.openssl.org">OpenSSL</url> project home page, diff --git a/lib/crypto/doc/src/notes.xml b/lib/crypto/doc/src/notes.xml index a9f8dd84af..4178ca2b08 100644 --- a/lib/crypto/doc/src/notes.xml +++ b/lib/crypto/doc/src/notes.xml @@ -4,7 +4,7 @@ <chapter> <header> <copyright> - <year>1999</year><year>2011</year> + <year>1999</year><year>2012</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> diff --git a/lib/crypto/src/crypto.erl b/lib/crypto/src/crypto.erl index 0089e79a4f..461558a79e 100644 --- a/lib/crypto/src/crypto.erl +++ b/lib/crypto/src/crypto.erl @@ -78,12 +78,11 @@ md5_mac, md5_mac_96, sha_mac, sha_mac_96, sha224_mac, sha256_mac, sha384_mac, sha512_mac, - sha_mac_init, sha_mac_update, sha_mac_final, des_cbc_encrypt, des_cbc_decrypt, des_cfb_encrypt, des_cfb_decrypt, des_ecb_encrypt, des_ecb_decrypt, - des_ede3_cbc_encrypt, des_ede3_cbc_decrypt, - des_ede3_cfb_encrypt, des_ede3_cfb_decrypt, + des3_cbc_encrypt, des3_cbc_decrypt, + des3_cfb_encrypt, des3_cfb_decrypt, aes_cfb_128_encrypt, aes_cfb_128_decrypt, rand_bytes, strong_rand_bytes, @@ -103,6 +102,13 @@ aes_cbc_256_encrypt, aes_cbc_256_decrypt, aes_ctr_encrypt, aes_ctr_decrypt, aes_ctr_stream_init, aes_ctr_stream_encrypt, aes_ctr_stream_decrypt, + aes_cbc_ivec, blowfish_cbc_encrypt, blowfish_cbc_decrypt, + blowfish_cfb64_encrypt, blowfish_cfb64_decrypt, + blowfish_ecb_encrypt, blowfish_ecb_decrypt, blowfish_ofb64_encrypt, + des_cbc_ivec, des_cfb_ivec, erlint, mpint, + hash, hash_init, hash_update, hash_final, + hmac_init, hmac_update, hmac_final, hmac_final_n, info, + rc2_cbc_encrypt, rc2_cbc_decrypt, info_lib]). -type rsa_digest_type() :: 'md5' | 'sha' | 'sha224' | 'sha256' | 'sha384' | 'sha512'. @@ -114,7 +120,7 @@ -on_load(on_load/0). --define(CRYPTO_NIF_VSN,101). +-define(CRYPTO_NIF_VSN,201). on_load() -> LibBaseName = "crypto", @@ -140,7 +146,7 @@ on_load() -> end end, Lib = filename:join([PrivDir, "lib", LibName]), - Status = case erlang:load_nif(Lib, ?CRYPTO_NIF_VSN) of + Status = case erlang:load_nif(Lib, {?CRYPTO_NIF_VSN,Lib}) of ok -> ok; {error, {load_failed, _}}=Error1 -> ArchLibDir = @@ -152,7 +158,7 @@ on_load() -> [] -> Error1; _ -> ArchLib = filename:join([ArchLibDir, LibName]), - erlang:load_nif(ArchLib, ?CRYPTO_NIF_VSN) + erlang:load_nif(ArchLib, {?CRYPTO_NIF_VSN,ArchLib}) end; Error1 -> Error1 end, @@ -597,12 +603,12 @@ des_ecb_crypt(_Key, _Data, _IsEncrypt) -> ?nif_stub. binary(). des3_cbc_encrypt(Key1, Key2, Key3, IVec, Data) -> - des_ede3_cbc_encrypt(Key1, Key2, Key3, IVec, Data). + des_ede3_cbc_crypt(Key1, Key2, Key3, IVec, Data, true). des_ede3_cbc_encrypt(Key1, Key2, Key3, IVec, Data) -> des_ede3_cbc_crypt(Key1, Key2, Key3, IVec, Data, true). des3_cbc_decrypt(Key1, Key2, Key3, IVec, Data) -> - des_ede3_cbc_decrypt(Key1, Key2, Key3, IVec, Data). + des_ede3_cbc_crypt(Key1, Key2, Key3, IVec, Data, false). des_ede3_cbc_decrypt(Key1, Key2, Key3, IVec, Data) -> des_ede3_cbc_crypt(Key1, Key2, Key3, IVec, Data, false). @@ -617,16 +623,18 @@ des_ede3_cbc_crypt(_Key1, _Key2, _Key3, _IVec, _Data, _IsEncrypt) -> ?nif_stub. binary(). des3_cfb_encrypt(Key1, Key2, Key3, IVec, Data) -> - des_ede3_cfb_encrypt(Key1, Key2, Key3, IVec, Data). -des_ede3_cfb_encrypt(Key1, Key2, Key3, IVec, Data) -> des_ede3_cfb_crypt(Key1, Key2, Key3, IVec, Data, true). des3_cfb_decrypt(Key1, Key2, Key3, IVec, Data) -> - des_ede3_cfb_decrypt(Key1, Key2, Key3, IVec, Data). -des_ede3_cfb_decrypt(Key1, Key2, Key3, IVec, Data) -> des_ede3_cfb_crypt(Key1, Key2, Key3, IVec, Data, false). -des_ede3_cfb_crypt(_Key1, _Key2, _Key3, _IVec, _Data, _IsEncrypt) -> ?nif_stub. +des_ede3_cfb_crypt(Key1, Key2, Key3, IVec, Data, IsEncrypt) -> + case des_ede3_cfb_crypt_nif(Key1,Key2,Key3,IVec,Data,IsEncrypt) of + notsup -> erlang:error(notsup); + Bin -> Bin + end. + +des_ede3_cfb_crypt_nif(_Key1, _Key2, _Key3, _IVec, _Data, _IsEncrypt) -> ?nif_stub. %% %% Blowfish diff --git a/lib/crypto/test/crypto_SUITE.erl b/lib/crypto/test/crypto_SUITE.erl index 7ac693f371..8965ab6b94 100644 --- a/lib/crypto/test/crypto_SUITE.erl +++ b/lib/crypto/test/crypto_SUITE.erl @@ -87,10 +87,12 @@ groups() -> {rest, [], [md5, md5_update, md4, md4_update, md5_mac, md5_mac_io, sha, sha_update, + sha256, sha256_update, sha512, sha512_update, hmac_update_sha, hmac_update_sha_n, hmac_update_sha256, hmac_update_sha512, hmac_update_md5_n, hmac_update_md5_io, hmac_update_md5, hmac_rfc4231, des_cbc, aes_cfb, aes_cbc, + des_cfb, des_cfb_iter, des3_cbc, des3_cfb, rc2_cbc, aes_cbc_iter, aes_ctr, aes_ctr_stream, des_cbc_iter, des_ecb, rand_uniform_test, strong_rand_test, rsa_verify_test, dsa_verify_test, rsa_sign_test, @@ -192,7 +194,16 @@ info(Config) when is_list(Config) -> {skip,"Missing crypto application"}; {_,_} -> ?line crypto:start(), - ?line crypto:info(), + ?line Info = crypto:info(), + ?line Exports = lists:usort([F || {F,_} <- crypto:module_info(exports)]), + ?line [] = Info -- Exports, + ?line NotInInfo = Exports -- Info, + io:format("NotInInfo = ~p\n", [NotInInfo]), + BlackList = lists:sort([des_ede3_cbc_decrypt, des_ede3_cbc_encrypt, + dh_check, dh_generate_parameters, + module_info, start, stop, version]), + ?line BlackList = NotInInfo, + ?line InfoLib = crypto:info_lib(), ?line [_|_] = InfoLib, F = fun([{Name,VerN,VerS}|T],Me) -> @@ -349,12 +360,8 @@ hmac_update_sha256(doc) -> hmac_update_sha256(suite) -> []; hmac_update_sha256(Config) when is_list(Config) -> - case openssl_version() of - V when V < 16#908000 -> - {skipped,"OpenSSL version too old"}; - _ -> - hmac_update_sha256_do() - end. + if_098(fun() -> hmac_update_sha256_do() end). + hmac_update_sha256_do() -> ?line Key = hexstr2bin("00010203101112132021222330313233" @@ -376,12 +383,7 @@ hmac_update_sha512(doc) -> hmac_update_sha512(suite) -> []; hmac_update_sha512(Config) when is_list(Config) -> - case openssl_version() of - V when V < 16#908000 -> - {skipped,"OpenSSL version too old"}; - _ -> - hmac_update_sha512_do() - end. + if_098(fun() -> hmac_update_sha512_do() end). hmac_update_sha512_do() -> ?line Key = hexstr2bin("00010203101112132021222330313233" @@ -422,12 +424,7 @@ hmac_rfc4231(doc) -> hmac_rfc4231(suite) -> []; hmac_rfc4231(Config) when is_list(Config) -> - case openssl_version() of - V when V < 16#908000 -> - {skipped,"OpenSSL version too old"}; - _ -> - hmac_rfc4231_do() - end. + if_098(fun() -> hmac_rfc4231_do() end). hmac_rfc4231_do() -> %% Test Case 1 @@ -746,6 +743,9 @@ sha256(doc) -> sha256(suite) -> []; sha256(Config) when is_list(Config) -> + if_098(fun() -> sha256_do() end). + +sha256_do() -> ?line m(crypto:sha256("abc"), hexstr2bin("BA7816BF8F01CFEA4141" "40DE5DAE2223B00361A396177A9CB410FF61F20015AD")), @@ -762,6 +762,9 @@ sha256_update(doc) -> sha256_update(suite) -> []; sha256_update(Config) when is_list(Config) -> + if_098(fun() -> sha256_update_do() end). + +sha256_update_do() -> ?line Ctx = crypto:sha256_init(), ?line Ctx1 = crypto:sha256_update(Ctx, "abcdbcdecdefdefgefghfghighi"), ?line Ctx2 = crypto:sha256_update(Ctx1, "jhijkijkljklmklmnlmnomnopnopq"), @@ -778,6 +781,9 @@ sha512(doc) -> sha512(suite) -> []; sha512(Config) when is_list(Config) -> + if_098(fun() -> sha512_do() end). + +sha512_do() -> ?line m(crypto:sha512("abc"), hexstr2bin("DDAF35A193617ABACC417349AE20413112E6FA4E89A97EA2" "0A9EEEE64B55D39A2192992A274FC1A836BA3C23A3FEEBBD" @@ -796,6 +802,9 @@ sha512_update(doc) -> sha512_update(suite) -> []; sha512_update(Config) when is_list(Config) -> + if_098(fun() -> sha512_update_do() end). + +sha512_update_do() -> ?line Ctx = crypto:sha512_init(), ?line Ctx1 = crypto:sha512_update(Ctx, "abcdefghbcdefghicdefghijdefghijkefghijklfghijklmghijklmn"), ?line Ctx2 = crypto:sha512_update(Ctx1, "hijklmnoijklmnopjklmnopqklmnopqrlmnopqrsmnopqrstnopqrstu"), @@ -996,6 +1005,12 @@ des3_cfb(doc) -> des3_cfb(suite) -> []; des3_cfb(Config) when is_list(Config) -> + case openssl_version() of + V when V < 16#90705F -> {skipped,"OpenSSL version too old"}; + _ -> des3_cfb_do() + end. + +des3_cfb_do() -> ?line Key1 = hexstr2bin("0123456789abcdef"), ?line Key2 = hexstr2bin("fedcba9876543210"), ?line Key3 = hexstr2bin("0f2d4b6987a5c3e1"), @@ -1959,3 +1974,10 @@ openssl_version() -> undefined end. +if_098(Fun) -> + case openssl_version() of + V when V < 16#908000 -> + {skipped,"OpenSSL version too old"}; + _ -> + Fun() + end. diff --git a/lib/debugger/src/dbg_wx_settings.erl b/lib/debugger/src/dbg_wx_settings.erl index 3be93c495c..94ecc5781d 100644 --- a/lib/debugger/src/dbg_wx_settings.erl +++ b/lib/debugger/src/dbg_wx_settings.erl @@ -49,31 +49,35 @@ save(Win, Pos, SFile) -> open_win(Win, Pos, SFile, Str, What) -> {SDir, SFileName} = - if - %% If settings are saved for the first time, and to - %% the default directory HOME/erlang.tools/debugger, - %% make sure the directory exists, or create it if - %% desired and possible - SFile==default -> {default_settings_dir(Win), "NoName.state"}; - true -> {filename:dirname(SFile), filename:basename(SFile)} - end, - + if + %% If settings are saved for the first time, and to + %% the default directory HOME/erlang.tools/debugger, + %% make sure the directory exists, or create it if + %% desired and possible + SFile==default -> {default_settings_dir(Win), "NoName.state"}; + true -> {filename:dirname(SFile), filename:basename(SFile)} + end, + FD = wxFileDialog:new(Win, [{message,Str},{pos, Pos}, - {defaultDir,SDir}, - {defaultFile,SFileName}, - {wildCard, "*.state"}, - {style,What}]), + {defaultDir,SDir}, + {defaultFile,SFileName}, + {wildCard, "*.state"}, + {style,What}]), case wxFileDialog:showModal(FD) of - ?wxID_OK -> - File = wxFileDialog:getFilename(FD), - Dir = wxFileDialog:getDirectory(FD), - wxFileDialog:destroy(FD), - {ok, filename:join(Dir,File)}; - _ -> - wxFileDialog:destroy(FD), - cancel + ?wxID_OK -> + case wxFileDialog:getPaths(FD) of + [NewFile] -> + wxFileDialog:destroy(FD), + {ok, NewFile}; + _ -> + wxFileDialog:destroy(FD), + cancel + end; + _ -> + wxFileDialog:destroy(FD), + cancel end. - + default_settings_dir(Win) -> {ok, [[Home]]} = init:get_argument(home), DefDir = filename:join([Home, ".erlang_tools", "debugger"]), diff --git a/lib/dialyzer/doc/src/notes.xml b/lib/dialyzer/doc/src/notes.xml index 0c1556308c..f485e4d03b 100644 --- a/lib/dialyzer/doc/src/notes.xml +++ b/lib/dialyzer/doc/src/notes.xml @@ -31,6 +31,24 @@ <p>This document describes the changes made to the Dialyzer application.</p> +<section><title>Dialyzer 2.5.3</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p>Fix a crash in race condition detection</p> <p>Remove + old untested experimental extension</p> <p>Respect + {plt_check,false} option when using dialyzer:run/1</p> + <p>Fix handling of tuple set remote types appearing in + tuple sets</p> + <p> + Own Id: OTP-10464</p> + </item> + </list> + </section> + +</section> + <section><title>Dialyzer 2.5.2</title> <section><title>Fixed Bugs and Malfunctions</title> diff --git a/lib/dialyzer/vsn.mk b/lib/dialyzer/vsn.mk index 64d05156b1..f344fe0604 100644 --- a/lib/dialyzer/vsn.mk +++ b/lib/dialyzer/vsn.mk @@ -1 +1 @@ -DIALYZER_VSN = 2.5.2 +DIALYZER_VSN = 2.5.3 diff --git a/lib/diameter/.gitignore b/lib/diameter/.gitignore index 5afcbedc23..8b13789179 100644 --- a/lib/diameter/.gitignore +++ b/lib/diameter/.gitignore @@ -1,58 +1 @@ -# Match at any level. -*~ -autom4te.cache - -# Compiler derivatives -# -# Do not use too creative wildcards. -# Those might ignore files that should not be ignored. - -i686-pc-linux-gnu -x86_64-unknown-linux-gnu -i386-apple-darwin[0-9]*.[0-9]*.[0-9]* -sparc-sun-solaris[0-9]*.[0-9]* -i386-pc-solaris[0-9]*.[0-9]* -i386-unknown-freebsd[0-9]*.[0-9]* -tile-tilera-linux-gnu -powerpc-unknown-linux-gnu - -# Mac OS X -a.out.dSYM/ - -# Anchored from $DIAMETER_TOP -/config.log -/config.status - -/Makefile -/configure - - -# General patterns for applications in lib. -# -# Assume that all test/Emakefiles are generated. -# -# Any application with a checked-in test/Emakefile should -# use a negative pattern in its own .gitignore. - -# -# Files generated by configure. -# - -/configure -/config.log -/config.status - - -# -# Generated documentation. (ie. not doc/src) -# - -/doc/[^s]* - - -# -# Files generated when building/running tests -# - -/test/*.log diff --git a/lib/diameter/Makefile b/lib/diameter/Makefile new file mode 100644 index 0000000000..9961d627cf --- /dev/null +++ b/lib/diameter/Makefile @@ -0,0 +1,32 @@ +# +# %CopyrightBegin% +# +# Copyright Ericsson AB 2010-2012. All Rights Reserved. +# +# The contents of this file are subject to the Erlang Public License, +# Version 1.1, (the "License"); you may not use this file except in +# compliance with the License. You should have received a copy of the +# Erlang Public License along with this software. If not, it can be +# retrieved online at http://www.erlang.org/. +# +# Software distributed under the License is distributed on an "AS IS" +# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +# the License for the specific language governing rights and limitations +# under the License. +# +# %CopyrightEnd% + +include $(ERL_TOP)/make/target.mk +include $(ERL_TOP)/make/$(TARGET)/otp.mk +include vsn.mk +include subdirs.mk + +SUB_DIRECTORIES = $(SUB_DIRS) doc/src +SPECIAL_TARGETS = + +include $(ERL_TOP)/make/otp_subdir.mk + +info: + @echo "APP_VSN = $(APP_VSN)" + +.PHONY: info diff --git a/lib/diameter/Makefile.in b/lib/diameter/Makefile.in deleted file mode 100644 index cf38c26045..0000000000 --- a/lib/diameter/Makefile.in +++ /dev/null @@ -1,88 +0,0 @@ -# -# %CopyrightBegin% -# -# Copyright Ericsson AB 2010-2011. All Rights Reserved. -# -# The contents of this file are subject to the Erlang Public License, -# Version 1.1, (the "License"); you may not use this file except in -# compliance with the License. You should have received a copy of the -# Erlang Public License along with this software. If not, it can be -# retrieved online at http://www.erlang.org/. -# -# Software distributed under the License is distributed on an "AS IS" -# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See -# the License for the specific language governing rights and limitations -# under the License. -# -# %CopyrightEnd% - -ifneq ($(ERL_TOP),) -include $(ERL_TOP)/make/target.mk -include $(ERL_TOP)/make/$(TARGET)/otp.mk -else -include $(DIAMETER_TOP)/make/target.mk -include $(DIAMETER_TOP)/make/$(TARGET)/rules.mk -endif - -# ---------------------------------------------------- -# Application version -# ---------------------------------------------------- -include vsn.mk -VSN=$(DIAMETER_VSN) - -DIAMETER_TOP = @DIAMETER_TOP@ - - -# ---------------------------------------------------- -# Common Macros -# ---------------------------------------------------- - -include subdirs.mk - -SUB_DIRECTORIES = $(SUB_DIRS) doc/src - -SPECIAL_TARGETS = - -ifneq ($(ERL_TOP),) -ifneq ($(PREFIX),) -CONFIGURE_OPTS += --prefix=$(PREFIX) -endif -endif - - -# ---------------------------------------------------- -# Default Subdir Targets -# ---------------------------------------------------- -ifneq ($(ERL_TOP),) -include $(ERL_TOP)/make/otp_subdir.mk -else -include $(DIAMETER_TOP)/make/subdir.mk -endif - -.PHONY: reconf conf info version dialyzer - -reconf: - autoconf - -conf: do_configure - -do_configure: configure - ./configure $(CONFIGURE_OPTS) - -configure: configure.in - autoconf - -info: - @echo "APP_VSN: $(APP_VSN)" - @echo "DIAMETER_VSN: $(DIAMETER_VSN)" - -version: - @echo "$(VSN)" - - -dialyzer: - (cd ./ebin; \ - dialyzer --build_plt \ - --output_plt ../priv/diameter.plt \ - -r ../../diameter/ebin \ - --verbose) diff --git a/lib/diameter/aclocal.m4 b/lib/diameter/aclocal.m4 deleted file mode 100644 index 2abb47dba2..0000000000 --- a/lib/diameter/aclocal.m4 +++ /dev/null @@ -1,65 +0,0 @@ -dnl -dnl %CopyrightBegin% -dnl -dnl Copyright Ericsson AB 1998-2011. All Rights Reserved. -dnl -dnl The contents of this file are subject to the Erlang Public License, -dnl Version 1.1, (the "License"); you may not use this file except in -dnl compliance with the License. You should have received a copy of the -dnl Erlang Public License along with this software. If not, it can be -dnl retrieved online at http://www.erlang.org/. -dnl -dnl Software distributed under the License is distributed on an "AS IS" -dnl basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See -dnl the License for the specific language governing rights and limitations -dnl under the License. -dnl -dnl %CopyrightEnd% -dnl - -dnl -dnl aclocal.m4 -dnl -dnl Local macros used in configure.in. The Local Macros which -dnl could/should be part of autoconf are prefixed LM_, macros specific -dnl to the Erlang system are prefixed ERL_. -dnl - -dnl ---------------------------------------------------------------------- -dnl -dnl LM_PROG_INSTALL_DIR -dnl -dnl Figure out how to create directories with parents. -dnl (In my opinion INSTALL_DIR is a bad name, MKSUBDIRS or something is better) -dnl -dnl We prefer 'install -d', but use 'mkdir -p' if it exists. -dnl If none of these methods works, we give up. -dnl - - -AC_DEFUN(LM_PROG_INSTALL_DIR, -[AC_CACHE_CHECK(how to create a directory including parents, -ac_cv_prog_mkdir_p, -[ -temp_name_base=config.$$ -temp_name=$temp_name_base/x/y/z -$INSTALL -d $temp_name >/dev/null 2>&1 -ac_cv_prog_mkdir_p=none -if test -d $temp_name; then - ac_cv_prog_mkdir_p="$INSTALL -d" -else - mkdir -p $temp_name >/dev/null 2>&1 - if test -d $temp_name; then - ac_cv_prog_mkdir_p="mkdir -p" - fi -fi -rm -fr $temp_name_base -]) - -case "${ac_cv_prog_mkdir_p}" in - none) AC_MSG_ERROR(don't know how create directories with parents) ;; - *) INSTALL_DIR="$ac_cv_prog_mkdir_p" AC_SUBST(INSTALL_DIR) ;; -esac -]) - - diff --git a/lib/diameter/autoconf/config.guess b/lib/diameter/autoconf/config.guess deleted file mode 100755 index 38a833903b..0000000000 --- a/lib/diameter/autoconf/config.guess +++ /dev/null @@ -1,1519 +0,0 @@ -#! /bin/sh -# Attempt to guess a canonical system name. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, -# Inc. - -timestamp='2007-05-17' - -# This file is free software; you can redistribute it and/or modify it -# under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA -# 02110-1301, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - - -# Originally written by Per Bothner <[email protected]>. -# Please send patches to <[email protected]>. Submit a context -# diff and a properly formatted ChangeLog entry. -# -# This script attempts to guess a canonical system name similar to -# config.sub. If it succeeds, it prints the system name on stdout, and -# exits with 0. Otherwise, it exits with 1. -# -# The plan is that this can be called by configure scripts if you -# don't specify an explicit build system type. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] - -Output the configuration name of the system \`$me' is run on. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to <[email protected]>." - -version="\ -GNU config.guess ($timestamp) - -Originally written by Per Bothner. -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 -Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" >&2 - exit 1 ;; - * ) - break ;; - esac -done - -if test $# != 0; then - echo "$me: too many arguments$help" >&2 - exit 1 -fi - -trap 'exit 1' 1 2 15 - -# CC_FOR_BUILD -- compiler used by this script. Note that the use of a -# compiler to aid in system detection is discouraged as it requires -# temporary files to be created and, as you can see below, it is a -# headache to deal with in a portable fashion. - -# Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still -# use `HOST_CC' if defined, but it is deprecated. - -# Portable tmp directory creation inspired by the Autoconf team. - -set_cc_for_build=' -trap "exitcode=\$?; (rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null) && exit \$exitcode" 0 ; -trap "rm -f \$tmpfiles 2>/dev/null; rmdir \$tmp 2>/dev/null; exit 1" 1 2 13 15 ; -: ${TMPDIR=/tmp} ; - { tmp=`(umask 077 && mktemp -d "$TMPDIR/cgXXXXXX") 2>/dev/null` && test -n "$tmp" && test -d "$tmp" ; } || - { test -n "$RANDOM" && tmp=$TMPDIR/cg$$-$RANDOM && (umask 077 && mkdir $tmp) ; } || - { tmp=$TMPDIR/cg-$$ && (umask 077 && mkdir $tmp) && echo "Warning: creating insecure temp directory" >&2 ; } || - { echo "$me: cannot create a temporary directory in $TMPDIR" >&2 ; exit 1 ; } ; -dummy=$tmp/dummy ; -tmpfiles="$dummy.c $dummy.o $dummy.rel $dummy" ; -case $CC_FOR_BUILD,$HOST_CC,$CC in - ,,) echo "int x;" > $dummy.c ; - for c in cc gcc c89 c99 ; do - if ($c -c -o $dummy.o $dummy.c) >/dev/null 2>&1 ; then - CC_FOR_BUILD="$c"; break ; - fi ; - done ; - if test x"$CC_FOR_BUILD" = x ; then - CC_FOR_BUILD=no_compiler_found ; - fi - ;; - ,,*) CC_FOR_BUILD=$CC ;; - ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac ; set_cc_for_build= ;' - -# This is needed to find uname on a Pyramid OSx when run in the BSD universe. -# ([email protected] 1994-08-24) -if (test -f /.attbin/uname) >/dev/null 2>&1 ; then - PATH=$PATH:/.attbin ; export PATH -fi - -UNAME_MACHINE=`(uname -m) 2>/dev/null` || UNAME_MACHINE=unknown -UNAME_RELEASE=`(uname -r) 2>/dev/null` || UNAME_RELEASE=unknown -UNAME_SYSTEM=`(uname -s) 2>/dev/null` || UNAME_SYSTEM=unknown -UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown - -# Note: order is significant - the case branches are not exclusive. - -case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in - *:NetBSD:*:*) - # NetBSD (nbsd) targets should (where applicable) match one or - # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, - # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently - # switched to ELF, *-*-netbsd* would select the old - # object file format. This provides both forward - # compatibility and a consistent mechanism for selecting the - # object file format. - # - # Note: NetBSD doesn't particularly care about the vendor - # portion of the name. We always set it to "unknown". - sysctl="sysctl -n hw.machine_arch" - UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ - /usr/sbin/$sysctl 2>/dev/null || echo unknown)` - case "${UNAME_MACHINE_ARCH}" in - armeb) machine=armeb-unknown ;; - arm*) machine=arm-unknown ;; - sh3el) machine=shl-unknown ;; - sh3eb) machine=sh-unknown ;; - sh5el) machine=sh5le-unknown ;; - *) machine=${UNAME_MACHINE_ARCH}-unknown ;; - esac - # The Operating System including object format, if it has switched - # to ELF recently, or will in the future. - case "${UNAME_MACHINE_ARCH}" in - arm*|i386|m68k|ns32k|sh3*|sparc|vax) - eval $set_cc_for_build - if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ - | grep __ELF__ >/dev/null - then - # Once all utilities can be ECOFF (netbsdecoff) or a.out (netbsdaout). - # Return netbsd for either. FIX? - os=netbsd - else - os=netbsdelf - fi - ;; - *) - os=netbsd - ;; - esac - # The OS release - # Debian GNU/NetBSD machines have a different userland, and - # thus, need a distinct triplet. However, they do not need - # kernel version information, so it can be replaced with a - # suitable tag, in the style of linux-gnu. - case "${UNAME_VERSION}" in - Debian*) - release='-gnu' - ;; - *) - release=`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` - ;; - esac - # Since CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM: - # contains redundant information, the shorter form: - # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. - echo "${machine}-${os}${release}" - exit ;; - *:OpenBSD:*:*) - UNAME_MACHINE_ARCH=`arch | sed 's/OpenBSD.//'` - echo ${UNAME_MACHINE_ARCH}-unknown-openbsd${UNAME_RELEASE} - exit ;; - *:ekkoBSD:*:*) - echo ${UNAME_MACHINE}-unknown-ekkobsd${UNAME_RELEASE} - exit ;; - *:SolidBSD:*:*) - echo ${UNAME_MACHINE}-unknown-solidbsd${UNAME_RELEASE} - exit ;; - macppc:MirBSD:*:*) - echo powerpc-unknown-mirbsd${UNAME_RELEASE} - exit ;; - *:MirBSD:*:*) - echo ${UNAME_MACHINE}-unknown-mirbsd${UNAME_RELEASE} - exit ;; - alpha:OSF1:*:*) - case $UNAME_RELEASE in - *4.0) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` - ;; - *5.*) - UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $4}'` - ;; - esac - # According to Compaq, /usr/sbin/psrinfo has been available on - # OSF/1 and Tru64 systems produced since 1995. I hope that - # covers most systems running today. This code pipes the CPU - # types through head -n 1, so we only detect the type of CPU 0. - ALPHA_CPU_TYPE=`/usr/sbin/psrinfo -v | sed -n -e 's/^ The alpha \(.*\) processor.*$/\1/p' | head -n 1` - case "$ALPHA_CPU_TYPE" in - "EV4 (21064)") - UNAME_MACHINE="alpha" ;; - "EV4.5 (21064)") - UNAME_MACHINE="alpha" ;; - "LCA4 (21066/21068)") - UNAME_MACHINE="alpha" ;; - "EV5 (21164)") - UNAME_MACHINE="alphaev5" ;; - "EV5.6 (21164A)") - UNAME_MACHINE="alphaev56" ;; - "EV5.6 (21164PC)") - UNAME_MACHINE="alphapca56" ;; - "EV5.7 (21164PC)") - UNAME_MACHINE="alphapca57" ;; - "EV6 (21264)") - UNAME_MACHINE="alphaev6" ;; - "EV6.7 (21264A)") - UNAME_MACHINE="alphaev67" ;; - "EV6.8CB (21264C)") - UNAME_MACHINE="alphaev68" ;; - "EV6.8AL (21264B)") - UNAME_MACHINE="alphaev68" ;; - "EV6.8CX (21264D)") - UNAME_MACHINE="alphaev68" ;; - "EV6.9A (21264/EV69A)") - UNAME_MACHINE="alphaev69" ;; - "EV7 (21364)") - UNAME_MACHINE="alphaev7" ;; - "EV7.9 (21364A)") - UNAME_MACHINE="alphaev79" ;; - esac - # A Pn.n version is a patched version. - # A Vn.n version is a released version. - # A Tn.n version is a released field test version. - # A Xn.n version is an unreleased experimental baselevel. - # 1.2 uses "1.2" for uname -r. - echo ${UNAME_MACHINE}-dec-osf`echo ${UNAME_RELEASE} | sed -e 's/^[PVTX]//' | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - exit ;; - Alpha\ *:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # Should we change UNAME_MACHINE based on the output of uname instead - # of the specific Alpha model? - echo alpha-pc-interix - exit ;; - 21064:Windows_NT:50:3) - echo alpha-dec-winnt3.5 - exit ;; - Amiga*:UNIX_System_V:4.0:*) - echo m68k-unknown-sysv4 - exit ;; - *:[Aa]miga[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-amigaos - exit ;; - *:[Mm]orph[Oo][Ss]:*:*) - echo ${UNAME_MACHINE}-unknown-morphos - exit ;; - *:OS/390:*:*) - echo i370-ibm-openedition - exit ;; - *:z/VM:*:*) - echo s390-ibm-zvmoe - exit ;; - *:OS400:*:*) - echo powerpc-ibm-os400 - exit ;; - arm:RISC*:1.[012]*:*|arm:riscix:1.[012]*:*) - echo arm-acorn-riscix${UNAME_RELEASE} - exit ;; - arm:riscos:*:*|arm:RISCOS:*:*) - echo arm-unknown-riscos - exit ;; - SR2?01:HI-UX/MPP:*:* | SR8000:HI-UX/MPP:*:*) - echo hppa1.1-hitachi-hiuxmpp - exit ;; - Pyramid*:OSx*:*:* | MIS*:OSx*:*:* | MIS*:SMP_DC-OSx*:*:*) - # [email protected] (Earle F. Ake) contributed MIS and NILE. - if test "`(/bin/universe) 2>/dev/null`" = att ; then - echo pyramid-pyramid-sysv3 - else - echo pyramid-pyramid-bsd - fi - exit ;; - NILE*:*:*:dcosx) - echo pyramid-pyramid-svr4 - exit ;; - DRS?6000:unix:4.0:6*) - echo sparc-icl-nx6 - exit ;; - DRS?6000:UNIX_SV:4.2*:7* | DRS?6000:isis:4.2*:7*) - case `/usr/bin/uname -p` in - sparc) echo sparc-icl-nx7; exit ;; - esac ;; - sun4H:SunOS:5.*:*) - echo sparc-hal-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:5.*:* | tadpole*:SunOS:5.*:*) - echo sparc-sun-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - i86pc:SunOS:5.*:* | ix86xen:SunOS:5.*:*) - echo i386-pc-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:6*:*) - # According to config.sub, this is the proper way to canonicalize - # SunOS6. Hard to guess exactly what SunOS6 will be like, but - # it's likely to be more like Solaris than SunOS4. - echo sparc-sun-solaris3`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - sun4*:SunOS:*:*) - case "`/usr/bin/arch -k`" in - Series*|S4*) - UNAME_RELEASE=`uname -v` - ;; - esac - # Japanese Language versions have a version number like `4.1.3-JL'. - echo sparc-sun-sunos`echo ${UNAME_RELEASE}|sed -e 's/-/_/'` - exit ;; - sun3*:SunOS:*:*) - echo m68k-sun-sunos${UNAME_RELEASE} - exit ;; - sun*:*:4.2BSD:*) - UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` - test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 - case "`/bin/arch`" in - sun3) - echo m68k-sun-sunos${UNAME_RELEASE} - ;; - sun4) - echo sparc-sun-sunos${UNAME_RELEASE} - ;; - esac - exit ;; - aushp:SunOS:*:*) - echo sparc-auspex-sunos${UNAME_RELEASE} - exit ;; - # The situation for MiNT is a little confusing. The machine name - # can be virtually everything (everything which is not - # "atarist" or "atariste" at least should have a processor - # > m68000). The system name ranges from "MiNT" over "FreeMiNT" - # to the lowercase version "mint" (or "freemint"). Finally - # the system name "TOS" denotes a system which is actually not - # MiNT. But MiNT is downward compatible to TOS, so this should - # be no problem. - atarist[e]:*MiNT:*:* | atarist[e]:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - atari*:*MiNT:*:* | atari*:*mint:*:* | atarist[e]:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - *falcon*:*MiNT:*:* | *falcon*:*mint:*:* | *falcon*:*TOS:*:*) - echo m68k-atari-mint${UNAME_RELEASE} - exit ;; - milan*:*MiNT:*:* | milan*:*mint:*:* | *milan*:*TOS:*:*) - echo m68k-milan-mint${UNAME_RELEASE} - exit ;; - hades*:*MiNT:*:* | hades*:*mint:*:* | *hades*:*TOS:*:*) - echo m68k-hades-mint${UNAME_RELEASE} - exit ;; - *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) - echo m68k-unknown-mint${UNAME_RELEASE} - exit ;; - m68k:machten:*:*) - echo m68k-apple-machten${UNAME_RELEASE} - exit ;; - powerpc:machten:*:*) - echo powerpc-apple-machten${UNAME_RELEASE} - exit ;; - RISC*:Mach:*:*) - echo mips-dec-mach_bsd4.3 - exit ;; - RISC*:ULTRIX:*:*) - echo mips-dec-ultrix${UNAME_RELEASE} - exit ;; - VAX*:ULTRIX*:*:*) - echo vax-dec-ultrix${UNAME_RELEASE} - exit ;; - 2020:CLIX:*:* | 2430:CLIX:*:*) - echo clipper-intergraph-clix${UNAME_RELEASE} - exit ;; - mips:*:*:UMIPS | mips:*:*:RISCos) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c -#ifdef __cplusplus -#include <stdio.h> /* for printf() prototype */ - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif - #if defined (host_mips) && defined (MIPSEB) - #if defined (SYSTYPE_SYSV) - printf ("mips-mips-riscos%ssysv\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_SVR4) - printf ("mips-mips-riscos%ssvr4\n", argv[1]); exit (0); - #endif - #if defined (SYSTYPE_BSD43) || defined(SYSTYPE_BSD) - printf ("mips-mips-riscos%sbsd\n", argv[1]); exit (0); - #endif - #endif - exit (-1); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && - dummyarg=`echo "${UNAME_RELEASE}" | sed -n 's/\([0-9]*\).*/\1/p'` && - SYSTEM_NAME=`$dummy $dummyarg` && - { echo "$SYSTEM_NAME"; exit; } - echo mips-mips-riscos${UNAME_RELEASE} - exit ;; - Motorola:PowerMAX_OS:*:*) - echo powerpc-motorola-powermax - exit ;; - Motorola:*:4.3:PL8-*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:*:*:PowerMAX_OS | Synergy:PowerMAX_OS:*:*) - echo powerpc-harris-powermax - exit ;; - Night_Hawk:Power_UNIX:*:*) - echo powerpc-harris-powerunix - exit ;; - m88k:CX/UX:7*:*) - echo m88k-harris-cxux7 - exit ;; - m88k:*:4*:R4*) - echo m88k-motorola-sysv4 - exit ;; - m88k:*:3*:R3*) - echo m88k-motorola-sysv3 - exit ;; - AViiON:dgux:*:*) - # DG/UX returns AViiON for all architectures - UNAME_PROCESSOR=`/usr/bin/uname -p` - if [ $UNAME_PROCESSOR = mc88100 ] || [ $UNAME_PROCESSOR = mc88110 ] - then - if [ ${TARGET_BINARY_INTERFACE}x = m88kdguxelfx ] || \ - [ ${TARGET_BINARY_INTERFACE}x = x ] - then - echo m88k-dg-dgux${UNAME_RELEASE} - else - echo m88k-dg-dguxbcs${UNAME_RELEASE} - fi - else - echo i586-dg-dgux${UNAME_RELEASE} - fi - exit ;; - M88*:DolphinOS:*:*) # DolphinOS (SVR3) - echo m88k-dolphin-sysv3 - exit ;; - M88*:*:R3*:*) - # Delta 88k system running SVR3 - echo m88k-motorola-sysv3 - exit ;; - XD88*:*:*:*) # Tektronix XD88 system running UTekV (SVR3) - echo m88k-tektronix-sysv3 - exit ;; - Tek43[0-9][0-9]:UTek:*:*) # Tektronix 4300 system running UTek (BSD) - echo m68k-tektronix-bsd - exit ;; - *:IRIX*:*:*) - echo mips-sgi-irix`echo ${UNAME_RELEASE}|sed -e 's/-/_/g'` - exit ;; - ????????:AIX?:[12].1:2) # AIX 2.2.1 or AIX 2.1.1 is RT/PC AIX. - echo romp-ibm-aix # uname -m gives an 8 hex-code CPU id - exit ;; # Note that: echo "'`uname -s`'" gives 'AIX ' - i*86:AIX:*:*) - echo i386-ibm-aix - exit ;; - ia64:AIX:*:*) - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${UNAME_MACHINE}-ibm-aix${IBM_REV} - exit ;; - *:AIX:2:3) - if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include <sys/systemcfg.h> - - main() - { - if (!__power_pc()) - exit(1); - puts("powerpc-ibm-aix3.2.5"); - exit(0); - } -EOF - if $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` - then - echo "$SYSTEM_NAME" - else - echo rs6000-ibm-aix3.2.5 - fi - elif grep bos324 /usr/include/stdio.h >/dev/null 2>&1; then - echo rs6000-ibm-aix3.2.4 - else - echo rs6000-ibm-aix3.2 - fi - exit ;; - *:AIX:*:[45]) - IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` - if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then - IBM_ARCH=rs6000 - else - IBM_ARCH=powerpc - fi - if [ -x /usr/bin/oslevel ] ; then - IBM_REV=`/usr/bin/oslevel` - else - IBM_REV=${UNAME_VERSION}.${UNAME_RELEASE} - fi - echo ${IBM_ARCH}-ibm-aix${IBM_REV} - exit ;; - *:AIX:*:*) - echo rs6000-ibm-aix - exit ;; - ibmrt:4.4BSD:*|romp-ibm:BSD:*) - echo romp-ibm-bsd4.4 - exit ;; - ibmrt:*BSD:*|romp-ibm:BSD:*) # covers RT/PC BSD and - echo romp-ibm-bsd${UNAME_RELEASE} # 4.3 with uname added to - exit ;; # report: romp-ibm BSD 4.3 - *:BOSX:*:*) - echo rs6000-bull-bosx - exit ;; - DPX/2?00:B.O.S.:*:*) - echo m68k-bull-sysv3 - exit ;; - 9000/[34]??:4.3bsd:1.*:*) - echo m68k-hp-bsd - exit ;; - hp300:4.4BSD:*:* | 9000/[34]??:4.3bsd:2.*:*) - echo m68k-hp-bsd4.4 - exit ;; - 9000/[34678]??:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - case "${UNAME_MACHINE}" in - 9000/31? ) HP_ARCH=m68000 ;; - 9000/[34]?? ) HP_ARCH=m68k ;; - 9000/[678][0-9][0-9]) - if [ -x /usr/bin/getconf ]; then - sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` - sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` - case "${sc_cpu_version}" in - 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 - 528) HP_ARCH="hppa1.1" ;; # CPU_PA_RISC1_1 - 532) # CPU_PA_RISC2_0 - case "${sc_kernel_bits}" in - 32) HP_ARCH="hppa2.0n" ;; - 64) HP_ARCH="hppa2.0w" ;; - '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 - esac ;; - esac - fi - if [ "${HP_ARCH}" = "" ]; then - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - - #define _HPUX_SOURCE - #include <stdlib.h> - #include <unistd.h> - - int main () - { - #if defined(_SC_KERNEL_BITS) - long bits = sysconf(_SC_KERNEL_BITS); - #endif - long cpu = sysconf (_SC_CPU_VERSION); - - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1"); break; - case CPU_PA_RISC2_0: - #if defined(_SC_KERNEL_BITS) - switch (bits) - { - case 64: puts ("hppa2.0w"); break; - case 32: puts ("hppa2.0n"); break; - default: puts ("hppa2.0"); break; - } break; - #else /* !defined(_SC_KERNEL_BITS) */ - puts ("hppa2.0"); break; - #endif - default: puts ("hppa1.0"); break; - } - exit (0); - } -EOF - (CCOPTS= $CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null) && HP_ARCH=`$dummy` - test -z "$HP_ARCH" && HP_ARCH=hppa - fi ;; - esac - if [ ${HP_ARCH} = "hppa2.0w" ] - then - eval $set_cc_for_build - - # hppa2.0w-hp-hpux* has a 64-bit kernel and a compiler generating - # 32-bit code. hppa64-hp-hpux* has the same kernel and a compiler - # generating 64-bit code. GNU and HP use different nomenclature: - # - # $ CC_FOR_BUILD=cc ./config.guess - # => hppa2.0w-hp-hpux11.23 - # $ CC_FOR_BUILD="cc +DA2.0w" ./config.guess - # => hppa64-hp-hpux11.23 - - if echo __LP64__ | (CCOPTS= $CC_FOR_BUILD -E - 2>/dev/null) | - grep __LP64__ >/dev/null - then - HP_ARCH="hppa2.0w" - else - HP_ARCH="hppa64" - fi - fi - echo ${HP_ARCH}-hp-hpux${HPUX_REV} - exit ;; - ia64:HP-UX:*:*) - HPUX_REV=`echo ${UNAME_RELEASE}|sed -e 's/[^.]*.[0B]*//'` - echo ia64-hp-hpux${HPUX_REV} - exit ;; - 3050*:HI-UX:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include <unistd.h> - int - main () - { - long cpu = sysconf (_SC_CPU_VERSION); - /* The order matters, because CPU_IS_HP_MC68K erroneously returns - true for CPU_PA_RISC1_0. CPU_IS_PA_RISC returns correct - results, however. */ - if (CPU_IS_PA_RISC (cpu)) - { - switch (cpu) - { - case CPU_PA_RISC1_0: puts ("hppa1.0-hitachi-hiuxwe2"); break; - case CPU_PA_RISC1_1: puts ("hppa1.1-hitachi-hiuxwe2"); break; - case CPU_PA_RISC2_0: puts ("hppa2.0-hitachi-hiuxwe2"); break; - default: puts ("hppa-hitachi-hiuxwe2"); break; - } - } - else if (CPU_IS_HP_MC68K (cpu)) - puts ("m68k-hitachi-hiuxwe2"); - else puts ("unknown-hitachi-hiuxwe2"); - exit (0); - } -EOF - $CC_FOR_BUILD -o $dummy $dummy.c && SYSTEM_NAME=`$dummy` && - { echo "$SYSTEM_NAME"; exit; } - echo unknown-hitachi-hiuxwe2 - exit ;; - 9000/7??:4.3bsd:*:* | 9000/8?[79]:4.3bsd:*:* ) - echo hppa1.1-hp-bsd - exit ;; - 9000/8??:4.3bsd:*:*) - echo hppa1.0-hp-bsd - exit ;; - *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) - echo hppa1.0-hp-mpeix - exit ;; - hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) - echo hppa1.1-hp-osf - exit ;; - hp8??:OSF1:*:*) - echo hppa1.0-hp-osf - exit ;; - i*86:OSF1:*:*) - if [ -x /usr/sbin/sysversion ] ; then - echo ${UNAME_MACHINE}-unknown-osf1mk - else - echo ${UNAME_MACHINE}-unknown-osf1 - fi - exit ;; - parisc*:Lites*:*:*) - echo hppa1.1-hp-lites - exit ;; - C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) - echo c1-convex-bsd - exit ;; - C2*:ConvexOS:*:* | convex:ConvexOS:C2*:*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit ;; - C34*:ConvexOS:*:* | convex:ConvexOS:C34*:*) - echo c34-convex-bsd - exit ;; - C38*:ConvexOS:*:* | convex:ConvexOS:C38*:*) - echo c38-convex-bsd - exit ;; - C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) - echo c4-convex-bsd - exit ;; - CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*[A-Z]90:*:*:*) - echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ - | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ - -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ - -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*TS:*:*:*) - echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*T3E:*:*:*) - echo alphaev5-cray-unicosmk${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - CRAY*SV1:*:*:*) - echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - *:UNICOS/mp:*:*) - echo craynv-cray-unicosmp${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' - exit ;; - F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) - FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` - echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - 5000:UNIX_System_V:4.*:*) - FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` - FUJITSU_REL=`echo ${UNAME_RELEASE} | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/ /_/'` - echo "sparc-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" - exit ;; - i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) - echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} - exit ;; - sparc*:BSD/OS:*:*) - echo sparc-unknown-bsdi${UNAME_RELEASE} - exit ;; - *:BSD/OS:*:*) - echo ${UNAME_MACHINE}-unknown-bsdi${UNAME_RELEASE} - exit ;; - *:FreeBSD:*:*) - case ${UNAME_MACHINE} in - pc98) - echo i386-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - amd64) - echo x86_64-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - *) - echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` ;; - esac - exit ;; - i*:CYGWIN*:*) - echo ${UNAME_MACHINE}-pc-cygwin - exit ;; - *:MINGW*:*) - echo ${UNAME_MACHINE}-pc-mingw32 - exit ;; - i*:windows32*:*) - # uname -m includes "-pc" on this system. - echo ${UNAME_MACHINE}-mingw32 - exit ;; - i*:PW*:*) - echo ${UNAME_MACHINE}-pc-pw32 - exit ;; - *:Interix*:[3456]*) - case ${UNAME_MACHINE} in - x86) - echo i586-pc-interix${UNAME_RELEASE} - exit ;; - EM64T | authenticamd) - echo x86_64-unknown-interix${UNAME_RELEASE} - exit ;; - esac ;; - [345]86:Windows_95:* | [345]86:Windows_98:* | [345]86:Windows_NT:*) - echo i${UNAME_MACHINE}-pc-mks - exit ;; - i*:Windows_NT*:* | Pentium*:Windows_NT*:*) - # How do we know it's Interix rather than the generic POSIX subsystem? - # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we - # UNAME_MACHINE based on the output of uname instead of i386? - echo i586-pc-interix - exit ;; - i*:UWIN*:*) - echo ${UNAME_MACHINE}-pc-uwin - exit ;; - amd64:CYGWIN*:*:* | x86_64:CYGWIN*:*:*) - echo x86_64-unknown-cygwin - exit ;; - p*:CYGWIN*:*) - echo powerpcle-unknown-cygwin - exit ;; - prep*:SunOS:5.*:*) - echo powerpcle-unknown-solaris2`echo ${UNAME_RELEASE}|sed -e 's/[^.]*//'` - exit ;; - *:GNU:*:*) - # the GNU system - echo `echo ${UNAME_MACHINE}|sed -e 's,[-/].*$,,'`-unknown-gnu`echo ${UNAME_RELEASE}|sed -e 's,/.*$,,'` - exit ;; - *:GNU/*:*:*) - # other systems with GNU libc and userland - echo ${UNAME_MACHINE}-unknown-`echo ${UNAME_SYSTEM} | sed 's,^[^/]*/,,' | tr '[A-Z]' '[a-z]'``echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'`-gnu - exit ;; - i*86:Minix:*:*) - echo ${UNAME_MACHINE}-pc-minix - exit ;; - arm*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - avr32*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - cris:Linux:*:*) - echo cris-axis-linux-gnu - exit ;; - crisv32:Linux:*:*) - echo crisv32-axis-linux-gnu - exit ;; - frv:Linux:*:*) - echo frv-unknown-linux-gnu - exit ;; - ia64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - m32r*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - m68*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - mips:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef mips - #undef mipsel - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=mipsel - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=mips - #else - CPU= - #endif - #endif -EOF - eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' - /^CPU/{ - s: ::g - p - }'`" - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } - ;; - mips64:Linux:*:*) - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #undef CPU - #undef mips64 - #undef mips64el - #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) - CPU=mips64el - #else - #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) - CPU=mips64 - #else - CPU= - #endif - #endif -EOF - eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' - /^CPU/{ - s: ::g - p - }'`" - test x"${CPU}" != x && { echo "${CPU}-unknown-linux-gnu"; exit; } - ;; - or32:Linux:*:*) - echo or32-unknown-linux-gnu - exit ;; - ppc:Linux:*:*) - echo powerpc-unknown-linux-gnu - exit ;; - ppc64:Linux:*:*) - echo powerpc64-unknown-linux-gnu - exit ;; - alpha:Linux:*:*) - case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in - EV5) UNAME_MACHINE=alphaev5 ;; - EV56) UNAME_MACHINE=alphaev56 ;; - PCA56) UNAME_MACHINE=alphapca56 ;; - PCA57) UNAME_MACHINE=alphapca56 ;; - EV6) UNAME_MACHINE=alphaev6 ;; - EV67) UNAME_MACHINE=alphaev67 ;; - EV68*) UNAME_MACHINE=alphaev68 ;; - esac - objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null - if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi - echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} - exit ;; - parisc:Linux:*:* | hppa:Linux:*:*) - # Look for CPU level - case `grep '^cpu[^a-z]*:' /proc/cpuinfo 2>/dev/null | cut -d' ' -f2` in - PA7*) echo hppa1.1-unknown-linux-gnu ;; - PA8*) echo hppa2.0-unknown-linux-gnu ;; - *) echo hppa-unknown-linux-gnu ;; - esac - exit ;; - parisc64:Linux:*:* | hppa64:Linux:*:*) - echo hppa64-unknown-linux-gnu - exit ;; - s390:Linux:*:* | s390x:Linux:*:*) - echo ${UNAME_MACHINE}-ibm-linux - exit ;; - sh64*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - sh*:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - sparc:Linux:*:* | sparc64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux-gnu - exit ;; - tile:Linux:*:*) - echo tile-unknown-linux-gnu - exit ;; - vax:Linux:*:*) - echo ${UNAME_MACHINE}-dec-linux-gnu - exit ;; - x86_64:Linux:*:*) - echo x86_64-unknown-linux-gnu - exit ;; - xtensa:Linux:*:*) - echo xtensa-unknown-linux-gnu - exit ;; - i*86:Linux:*:*) - # The BFD linker knows what the default object file format is, so - # first see if it will tell us. cd to the root directory to prevent - # problems with other programs or directories called `ld' in the path. - # Set LC_ALL=C to ensure ld outputs messages in English. - ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ - | sed -ne '/supported targets:/!d - s/[ ][ ]*/ /g - s/.*supported targets: *// - s/ .*// - p'` - case "$ld_supported_targets" in - elf32-i386) - TENTATIVE="${UNAME_MACHINE}-pc-linux-gnu" - ;; - a.out-i386-linux) - echo "${UNAME_MACHINE}-pc-linux-gnuaout" - exit ;; - coff-i386) - echo "${UNAME_MACHINE}-pc-linux-gnucoff" - exit ;; - "") - # Either a pre-BFD a.out linker (linux-gnuoldld) or - # one that does not give us useful --help. - echo "${UNAME_MACHINE}-pc-linux-gnuoldld" - exit ;; - esac - # Determine whether the default compiler is a.out or elf - eval $set_cc_for_build - sed 's/^ //' << EOF >$dummy.c - #include <features.h> - #ifdef __ELF__ - # ifdef __GLIBC__ - # if __GLIBC__ >= 2 - LIBC=gnu - # else - LIBC=gnulibc1 - # endif - # else - LIBC=gnulibc1 - # endif - #else - #if defined(__INTEL_COMPILER) || defined(__PGI) || defined(__SUNPRO_C) || defined(__SUNPRO_CC) - LIBC=gnu - #else - LIBC=gnuaout - #endif - #endif - #ifdef __dietlibc__ - LIBC=dietlibc - #endif -EOF - eval "`$CC_FOR_BUILD -E $dummy.c 2>/dev/null | sed -n ' - /^LIBC/{ - s: ::g - p - }'`" - test x"${LIBC}" != x && { - echo "${UNAME_MACHINE}-pc-linux-${LIBC}" - exit - } - test x"${TENTATIVE}" != x && { echo "${TENTATIVE}"; exit; } - ;; - i*86:DYNIX/ptx:4*:*) - # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. - # earlier versions are messed up and put the nodename in both - # sysname and nodename. - echo i386-sequent-sysv4 - exit ;; - i*86:UNIX_SV:4.2MP:2.*) - # Unixware is an offshoot of SVR4, but it has its own version - # number series starting with 2... - # I am not positive that other SVR4 systems won't match this, - # I just have to hope. -- rms. - # Use sysv4.2uw... so that sysv4* matches it. - echo ${UNAME_MACHINE}-pc-sysv4.2uw${UNAME_VERSION} - exit ;; - i*86:OS/2:*:*) - # If we were able to find `uname', then EMX Unix compatibility - # is probably installed. - echo ${UNAME_MACHINE}-pc-os2-emx - exit ;; - i*86:XTS-300:*:STOP) - echo ${UNAME_MACHINE}-unknown-stop - exit ;; - i*86:atheos:*:*) - echo ${UNAME_MACHINE}-unknown-atheos - exit ;; - i*86:syllable:*:*) - echo ${UNAME_MACHINE}-pc-syllable - exit ;; - i*86:LynxOS:2.*:* | i*86:LynxOS:3.[01]*:* | i*86:LynxOS:4.0*:*) - echo i386-unknown-lynxos${UNAME_RELEASE} - exit ;; - i*86:*DOS:*:*) - echo ${UNAME_MACHINE}-pc-msdosdjgpp - exit ;; - i*86:*:4.*:* | i*86:SYSTEM_V:4.*:*) - UNAME_REL=`echo ${UNAME_RELEASE} | sed 's/\/MP$//'` - if grep Novell /usr/include/link.h >/dev/null 2>/dev/null; then - echo ${UNAME_MACHINE}-univel-sysv${UNAME_REL} - else - echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} - fi - exit ;; - i*86:*:5:[678]*) - # UnixWare 7.x, OpenUNIX and OpenServer 6. - case `/bin/uname -X | grep "^Machine"` in - *486*) UNAME_MACHINE=i486 ;; - *Pentium) UNAME_MACHINE=i586 ;; - *Pent*|*Celeron) UNAME_MACHINE=i686 ;; - esac - echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} - exit ;; - i*86:*:3.2:*) - if test -f /usr/options/cb.name; then - UNAME_REL=`sed -n 's/.*Version //p' </usr/options/cb.name` - echo ${UNAME_MACHINE}-pc-isc$UNAME_REL - elif /bin/uname -X 2>/dev/null >/dev/null ; then - UNAME_REL=`(/bin/uname -X|grep Release|sed -e 's/.*= //')` - (/bin/uname -X|grep i80486 >/dev/null) && UNAME_MACHINE=i486 - (/bin/uname -X|grep '^Machine.*Pentium' >/dev/null) \ - && UNAME_MACHINE=i586 - (/bin/uname -X|grep '^Machine.*Pent *II' >/dev/null) \ - && UNAME_MACHINE=i686 - (/bin/uname -X|grep '^Machine.*Pentium Pro' >/dev/null) \ - && UNAME_MACHINE=i686 - echo ${UNAME_MACHINE}-pc-sco$UNAME_REL - else - echo ${UNAME_MACHINE}-pc-sysv32 - fi - exit ;; - pc:*:*:*) - # Left here for compatibility: - # uname -m prints for DJGPP always 'pc', but it prints nothing about - # the processor, so we play safe by assuming i386. - echo i386-pc-msdosdjgpp - exit ;; - Intel:Mach:3*:*) - echo i386-pc-mach3 - exit ;; - paragon:*:*:*) - echo i860-intel-osf1 - exit ;; - i860:*:4.*:*) # i860-SVR4 - if grep Stardent /usr/include/sys/uadmin.h >/dev/null 2>&1 ; then - echo i860-stardent-sysv${UNAME_RELEASE} # Stardent Vistra i860-SVR4 - else # Add other i860-SVR4 vendors below as they are discovered. - echo i860-unknown-sysv${UNAME_RELEASE} # Unknown i860-SVR4 - fi - exit ;; - mini*:CTIX:SYS*5:*) - # "miniframe" - echo m68010-convergent-sysv - exit ;; - mc68k:UNIX:SYSTEM5:3.51m) - echo m68k-convergent-sysv - exit ;; - M680?0:D-NIX:5.3:*) - echo m68k-diab-dnix - exit ;; - M68*:*:R3V[5678]*:*) - test -r /sysV68 && { echo 'm68k-motorola-sysv'; exit; } ;; - 3[345]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4400:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0 | SDS2:*:4.0:3.0 | SHG2:*:4.0:3.0 | S7501*:*:4.0:3.0) - OS_REL='' - test -r /etc/.relid \ - && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4.3${OS_REL}; exit; } - /bin/uname -p 2>/dev/null | /bin/grep entium >/dev/null \ - && { echo i586-ncr-sysv4.3${OS_REL}; exit; } ;; - 3[34]??:*:4.0:* | 3[34]??,*:*:4.0:*) - /bin/uname -p 2>/dev/null | grep 86 >/dev/null \ - && { echo i486-ncr-sysv4; exit; } ;; - m68*:LynxOS:2.*:* | m68*:LynxOS:3.0*:*) - echo m68k-unknown-lynxos${UNAME_RELEASE} - exit ;; - mc68030:UNIX_System_V:4.*:*) - echo m68k-atari-sysv4 - exit ;; - TSUNAMI:LynxOS:2.*:*) - echo sparc-unknown-lynxos${UNAME_RELEASE} - exit ;; - rs6000:LynxOS:2.*:*) - echo rs6000-unknown-lynxos${UNAME_RELEASE} - exit ;; - PowerPC:LynxOS:2.*:* | PowerPC:LynxOS:3.[01]*:* | PowerPC:LynxOS:4.0*:*) - echo powerpc-unknown-lynxos${UNAME_RELEASE} - exit ;; - SM[BE]S:UNIX_SV:*:*) - echo mips-dde-sysv${UNAME_RELEASE} - exit ;; - RM*:ReliantUNIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - RM*:SINIX-*:*:*) - echo mips-sni-sysv4 - exit ;; - *:SINIX-*:*:*) - if uname -p 2>/dev/null >/dev/null ; then - UNAME_MACHINE=`(uname -p) 2>/dev/null` - echo ${UNAME_MACHINE}-sni-sysv4 - else - echo ns32k-sni-sysv - fi - exit ;; - PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says <[email protected]> - echo i586-unisys-sysv4 - exit ;; - *:UNIX_System_V:4*:FTX*) - # From Gerald Hewes <[email protected]>. - # How about differentiating between stratus architectures? -djm - echo hppa1.1-stratus-sysv4 - exit ;; - *:*:*:FTX*) - # From [email protected]. - echo i860-stratus-sysv4 - exit ;; - i*86:VOS:*:*) - # From [email protected]. - echo ${UNAME_MACHINE}-stratus-vos - exit ;; - *:VOS:*:*) - # From [email protected]. - echo hppa1.1-stratus-vos - exit ;; - mc68*:A/UX:*:*) - echo m68k-apple-aux${UNAME_RELEASE} - exit ;; - news*:NEWS-OS:6*:*) - echo mips-sony-newsos6 - exit ;; - R[34]000:*System_V*:*:* | R4000:UNIX_SYSV:*:* | R*000:UNIX_SV:*:*) - if [ -d /usr/nec ]; then - echo mips-nec-sysv${UNAME_RELEASE} - else - echo mips-unknown-sysv${UNAME_RELEASE} - fi - exit ;; - BeBox:BeOS:*:*) # BeOS running on hardware made by Be, PPC only. - echo powerpc-be-beos - exit ;; - BeMac:BeOS:*:*) # BeOS running on Mac or Mac clone, PPC only. - echo powerpc-apple-beos - exit ;; - BePC:BeOS:*:*) # BeOS running on Intel PC compatible. - echo i586-pc-beos - exit ;; - SX-4:SUPER-UX:*:*) - echo sx4-nec-superux${UNAME_RELEASE} - exit ;; - SX-5:SUPER-UX:*:*) - echo sx5-nec-superux${UNAME_RELEASE} - exit ;; - SX-6:SUPER-UX:*:*) - echo sx6-nec-superux${UNAME_RELEASE} - exit ;; - SX-7:SUPER-UX:*:*) - echo sx7-nec-superux${UNAME_RELEASE} - exit ;; - SX-8:SUPER-UX:*:*) - echo sx8-nec-superux${UNAME_RELEASE} - exit ;; - SX-8R:SUPER-UX:*:*) - echo sx8r-nec-superux${UNAME_RELEASE} - exit ;; - Power*:Rhapsody:*:*) - echo powerpc-apple-rhapsody${UNAME_RELEASE} - exit ;; - *:Rhapsody:*:*) - echo ${UNAME_MACHINE}-apple-rhapsody${UNAME_RELEASE} - exit ;; - *:Darwin:*:*) - UNAME_PROCESSOR=`uname -p` || UNAME_PROCESSOR=unknown - case $UNAME_PROCESSOR in - unknown) UNAME_PROCESSOR=powerpc ;; - esac - echo ${UNAME_PROCESSOR}-apple-darwin${UNAME_RELEASE} - exit ;; - *:procnto*:*:* | *:QNX:[0123456789]*:*) - UNAME_PROCESSOR=`uname -p` - if test "$UNAME_PROCESSOR" = "x86"; then - UNAME_PROCESSOR=i386 - UNAME_MACHINE=pc - fi - echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} - exit ;; - *:QNX:*:4*) - echo i386-pc-qnx - exit ;; - NSE-?:NONSTOP_KERNEL:*:*) - echo nse-tandem-nsk${UNAME_RELEASE} - exit ;; - NSR-?:NONSTOP_KERNEL:*:*) - echo nsr-tandem-nsk${UNAME_RELEASE} - exit ;; - *:NonStop-UX:*:*) - echo mips-compaq-nonstopux - exit ;; - BS2000:POSIX*:*:*) - echo bs2000-siemens-sysv - exit ;; - DS/*:UNIX_System_V:*:*) - echo ${UNAME_MACHINE}-${UNAME_SYSTEM}-${UNAME_RELEASE} - exit ;; - *:Plan9:*:*) - # "uname -m" is not consistent, so use $cputype instead. 386 - # is converted to i386 for consistency with other x86 - # operating systems. - if test "$cputype" = "386"; then - UNAME_MACHINE=i386 - else - UNAME_MACHINE="$cputype" - fi - echo ${UNAME_MACHINE}-unknown-plan9 - exit ;; - *:TOPS-10:*:*) - echo pdp10-unknown-tops10 - exit ;; - *:TENEX:*:*) - echo pdp10-unknown-tenex - exit ;; - KS10:TOPS-20:*:* | KL10:TOPS-20:*:* | TYPE4:TOPS-20:*:*) - echo pdp10-dec-tops20 - exit ;; - XKL-1:TOPS-20:*:* | TYPE5:TOPS-20:*:*) - echo pdp10-xkl-tops20 - exit ;; - *:TOPS-20:*:*) - echo pdp10-unknown-tops20 - exit ;; - *:ITS:*:*) - echo pdp10-unknown-its - exit ;; - SEI:*:*:SEIUX) - echo mips-sei-seiux${UNAME_RELEASE} - exit ;; - *:DragonFly:*:*) - echo ${UNAME_MACHINE}-unknown-dragonfly`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` - exit ;; - *:*VMS:*:*) - UNAME_MACHINE=`(uname -p) 2>/dev/null` - case "${UNAME_MACHINE}" in - A*) echo alpha-dec-vms ; exit ;; - I*) echo ia64-dec-vms ; exit ;; - V*) echo vax-dec-vms ; exit ;; - esac ;; - *:XENIX:*:SysV) - echo i386-pc-xenix - exit ;; - i*86:skyos:*:*) - echo ${UNAME_MACHINE}-pc-skyos`echo ${UNAME_RELEASE}` | sed -e 's/ .*$//' - exit ;; - i*86:rdos:*:*) - echo ${UNAME_MACHINE}-pc-rdos - exit ;; -esac - -#echo '(No uname command or uname output not recognized.)' 1>&2 -#echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 - -eval $set_cc_for_build -cat >$dummy.c <<EOF -#ifdef _SEQUENT_ -# include <sys/types.h> -# include <sys/utsname.h> -#endif -main () -{ -#if defined (sony) -#if defined (MIPSEB) - /* BFD wants "bsd" instead of "newsos". Perhaps BFD should be changed, - I don't know.... */ - printf ("mips-sony-bsd\n"); exit (0); -#else -#include <sys/param.h> - printf ("m68k-sony-newsos%s\n", -#ifdef NEWSOS4 - "4" -#else - "" -#endif - ); exit (0); -#endif -#endif - -#if defined (__arm) && defined (__acorn) && defined (__unix) - printf ("arm-acorn-riscix\n"); exit (0); -#endif - -#if defined (hp300) && !defined (hpux) - printf ("m68k-hp-bsd\n"); exit (0); -#endif - -#if defined (NeXT) -#if !defined (__ARCHITECTURE__) -#define __ARCHITECTURE__ "m68k" -#endif - int version; - version=`(hostinfo | sed -n 's/.*NeXT Mach \([0-9]*\).*/\1/p') 2>/dev/null`; - if (version < 4) - printf ("%s-next-nextstep%d\n", __ARCHITECTURE__, version); - else - printf ("%s-next-openstep%d\n", __ARCHITECTURE__, version); - exit (0); -#endif - -#if defined (MULTIMAX) || defined (n16) -#if defined (UMAXV) - printf ("ns32k-encore-sysv\n"); exit (0); -#else -#if defined (CMU) - printf ("ns32k-encore-mach\n"); exit (0); -#else - printf ("ns32k-encore-bsd\n"); exit (0); -#endif -#endif -#endif - -#if defined (__386BSD__) - printf ("i386-pc-bsd\n"); exit (0); -#endif - -#if defined (sequent) -#if defined (i386) - printf ("i386-sequent-dynix\n"); exit (0); -#endif -#if defined (ns32000) - printf ("ns32k-sequent-dynix\n"); exit (0); -#endif -#endif - -#if defined (_SEQUENT_) - struct utsname un; - - uname(&un); - - if (strncmp(un.version, "V2", 2) == 0) { - printf ("i386-sequent-ptx2\n"); exit (0); - } - if (strncmp(un.version, "V1", 2) == 0) { /* XXX is V1 correct? */ - printf ("i386-sequent-ptx1\n"); exit (0); - } - printf ("i386-sequent-ptx\n"); exit (0); - -#endif - -#if defined (vax) -# if !defined (ultrix) -# include <sys/param.h> -# if defined (BSD) -# if BSD == 43 - printf ("vax-dec-bsd4.3\n"); exit (0); -# else -# if BSD == 199006 - printf ("vax-dec-bsd4.3reno\n"); exit (0); -# else - printf ("vax-dec-bsd\n"); exit (0); -# endif -# endif -# else - printf ("vax-dec-bsd\n"); exit (0); -# endif -# else - printf ("vax-dec-ultrix\n"); exit (0); -# endif -#endif - -#if defined (alliant) && defined (i860) - printf ("i860-alliant-bsd\n"); exit (0); -#endif - - exit (1); -} -EOF - -$CC_FOR_BUILD -o $dummy $dummy.c 2>/dev/null && SYSTEM_NAME=`$dummy` && - { echo "$SYSTEM_NAME"; exit; } - -# Apollos put the system type in the environment. - -test -d /usr/apollo && { echo ${ISP}-apollo-${SYSTYPE}; exit; } - -# Convex versions that predate uname can use getsysinfo(1) - -if [ -x /usr/convex/getsysinfo ] -then - case `getsysinfo -f cpu_type` in - c1*) - echo c1-convex-bsd - exit ;; - c2*) - if getsysinfo -f scalar_acc - then echo c32-convex-bsd - else echo c2-convex-bsd - fi - exit ;; - c34*) - echo c34-convex-bsd - exit ;; - c38*) - echo c38-convex-bsd - exit ;; - c4*) - echo c4-convex-bsd - exit ;; - esac -fi - -cat >&2 <<EOF -$0: unable to guess system type - -This script, last modified $timestamp, has failed to recognize -the operating system you are using. It is advised that you -download the most up to date version of the config scripts from - - http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.guess -and - http://savannah.gnu.org/cgi-bin/viewcvs/*checkout*/config/config/config.sub - -If the version you run ($0) is already up to date, please -send the following data and any information you think might be -pertinent to <[email protected]> in order to provide the needed -information to handle your system. - -config.guess timestamp = $timestamp - -uname -m = `(uname -m) 2>/dev/null || echo unknown` -uname -r = `(uname -r) 2>/dev/null || echo unknown` -uname -s = `(uname -s) 2>/dev/null || echo unknown` -uname -v = `(uname -v) 2>/dev/null || echo unknown` - -/usr/bin/uname -p = `(/usr/bin/uname -p) 2>/dev/null` -/bin/uname -X = `(/bin/uname -X) 2>/dev/null` - -hostinfo = `(hostinfo) 2>/dev/null` -/bin/universe = `(/bin/universe) 2>/dev/null` -/usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null` -/bin/arch = `(/bin/arch) 2>/dev/null` -/usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null` -/usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null` - -UNAME_MACHINE = ${UNAME_MACHINE} -UNAME_RELEASE = ${UNAME_RELEASE} -UNAME_SYSTEM = ${UNAME_SYSTEM} -UNAME_VERSION = ${UNAME_VERSION} -EOF - -exit 1 - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/lib/diameter/autoconf/config.sub b/lib/diameter/autoconf/config.sub deleted file mode 100755 index f43233b104..0000000000 --- a/lib/diameter/autoconf/config.sub +++ /dev/null @@ -1,1630 +0,0 @@ -#! /bin/sh -# Configuration validation subroutine script. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, -# 2000, 2001, 2002, 2003, 2004, 2005, 2006 Free Software Foundation, -# Inc. - -timestamp='2007-04-29' - -# This file is (in principle) common to ALL GNU software. -# The presence of a machine in this file suggests that SOME GNU software -# can handle that machine. It does not imply ALL GNU software can. -# -# This file is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 51 Franklin Street - Fifth Floor, Boston, MA -# 02110-1301, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - - -# Please send patches to <[email protected]>. Submit a context -# diff and a properly formatted ChangeLog entry. -# -# Configuration subroutine to validate and canonicalize a configuration type. -# Supply the specified configuration type as an argument. -# If it is invalid, we print an error message on stderr and exit with code 1. -# Otherwise, we print the canonical config type on stdout and succeed. - -# This file is supposed to be the same for all GNU packages -# and recognize all the CPU types, system types and aliases -# that are meaningful with *any* GNU software. -# Each package is responsible for reporting which valid configurations -# it does not support. The user should be able to distinguish -# a failure to support a valid configuration from a meaningless -# configuration. - -# The goal of this file is to map all the various variations of a given -# machine specification into a single specification in the form: -# CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM -# or in some cases, the newer four-part form: -# CPU_TYPE-MANUFACTURER-KERNEL-OPERATING_SYSTEM -# It is wrong to echo any other type of specification. - -me=`echo "$0" | sed -e 's,.*/,,'` - -usage="\ -Usage: $0 [OPTION] CPU-MFR-OPSYS - $0 [OPTION] ALIAS - -Canonicalize a configuration name. - -Operation modes: - -h, --help print this help, then exit - -t, --time-stamp print date of last modification, then exit - -v, --version print version number, then exit - -Report bugs and patches to <[email protected]>." - -version="\ -GNU config.sub ($timestamp) - -Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 -Free Software Foundation, Inc. - -This is free software; see the source for copying conditions. There is NO -warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." - -help=" -Try \`$me --help' for more information." - -# Parse command line -while test $# -gt 0 ; do - case $1 in - --time-stamp | --time* | -t ) - echo "$timestamp" ; exit ;; - --version | -v ) - echo "$version" ; exit ;; - --help | --h* | -h ) - echo "$usage"; exit ;; - -- ) # Stop option processing - shift; break ;; - - ) # Use stdin as input. - break ;; - -* ) - echo "$me: invalid option $1$help" - exit 1 ;; - - *local*) - # First pass through any local machine types. - echo $1 - exit ;; - - * ) - break ;; - esac -done - -case $# in - 0) echo "$me: missing argument$help" >&2 - exit 1;; - 1) ;; - *) echo "$me: too many arguments$help" >&2 - exit 1;; -esac - -# Separate what the user gave into CPU-COMPANY and OS or KERNEL-OS (if any). -# Here we must recognize all the valid KERNEL-OS combinations. -maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` -case $maybe_os in - nto-qnx* | linux-gnu* | linux-dietlibc | linux-newlib* | linux-uclibc* | \ - uclinux-uclibc* | uclinux-gnu* | kfreebsd*-gnu* | knetbsd*-gnu* | netbsd*-gnu* | \ - storm-chaos* | os2-emx* | rtmk-nova*) - os=-$maybe_os - basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` - ;; - *) - basic_machine=`echo $1 | sed 's/-[^-]*$//'` - if [ $basic_machine != $1 ] - then os=`echo $1 | sed 's/.*-/-/'` - else os=; fi - ;; -esac - -### Let's recognize common machines as not being operating systems so -### that things like config.sub decstation-3100 work. We also -### recognize some manufacturers as not being operating systems, so we -### can provide default operating systems below. -case $os in - -sun*os*) - # Prevent following clause from handling this invalid input. - ;; - -dec* | -mips* | -sequent* | -encore* | -pc532* | -sgi* | -sony* | \ - -att* | -7300* | -3300* | -delta* | -motorola* | -sun[234]* | \ - -unicom* | -ibm* | -next | -hp | -isi* | -apollo | -altos* | \ - -convergent* | -ncr* | -news | -32* | -3600* | -3100* | -hitachi* |\ - -c[123]* | -convex* | -sun | -crds | -omron* | -dg | -ultra | -tti* | \ - -harris | -dolphin | -highlevel | -gould | -cbm | -ns | -masscomp | \ - -apple | -axis | -knuth | -cray) - os= - basic_machine=$1 - ;; - -sim | -cisco | -oki | -wec | -winbond) - os= - basic_machine=$1 - ;; - -scout) - ;; - -wrs) - os=-vxworks - basic_machine=$1 - ;; - -chorusos*) - os=-chorusos - basic_machine=$1 - ;; - -chorusrdb) - os=-chorusrdb - basic_machine=$1 - ;; - -hiux*) - os=-hiuxwe2 - ;; - -sco6) - os=-sco5v6 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco5) - os=-sco3.2v5 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco4) - os=-sco3.2v4 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2.[4-9]*) - os=`echo $os | sed -e 's/sco3.2./sco3.2v/'` - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco3.2v[4-9]*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco5v6*) - # Don't forget version if it is 3.2v4 or newer. - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -sco*) - os=-sco3.2v2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -udk*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -isc) - os=-isc2.2 - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -clix*) - basic_machine=clipper-intergraph - ;; - -isc*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-pc/'` - ;; - -lynx*) - os=-lynxos - ;; - -ptx*) - basic_machine=`echo $1 | sed -e 's/86-.*/86-sequent/'` - ;; - -windowsnt*) - os=`echo $os | sed -e 's/windowsnt/winnt/'` - ;; - -psos*) - os=-psos - ;; - -mint | -mint[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; -esac - -# Decode aliases for certain CPU-COMPANY combinations. -case $basic_machine in - # Recognize the basic CPU types without company name. - # Some are omitted here because they have special meanings below. - 1750a | 580 \ - | a29k \ - | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ - | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ - | am33_2.0 \ - | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr | avr32 \ - | bfin \ - | c4x | clipper \ - | d10v | d30v | dlx | dsp16xx \ - | fido | fr30 | frv \ - | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ - | i370 | i860 | i960 | ia64 \ - | ip2k | iq2000 \ - | m32c | m32r | m32rle | m68000 | m68k | m88k \ - | maxq | mb | microblaze | mcore | mep \ - | mips | mipsbe | mipseb | mipsel | mipsle \ - | mips16 \ - | mips64 | mips64el \ - | mips64vr | mips64vrel \ - | mips64orion | mips64orionel \ - | mips64vr4100 | mips64vr4100el \ - | mips64vr4300 | mips64vr4300el \ - | mips64vr5000 | mips64vr5000el \ - | mips64vr5900 | mips64vr5900el \ - | mipsisa32 | mipsisa32el \ - | mipsisa32r2 | mipsisa32r2el \ - | mipsisa64 | mipsisa64el \ - | mipsisa64r2 | mipsisa64r2el \ - | mipsisa64sb1 | mipsisa64sb1el \ - | mipsisa64sr71k | mipsisa64sr71kel \ - | mipstx39 | mipstx39el \ - | mn10200 | mn10300 \ - | mt \ - | msp430 \ - | nios | nios2 \ - | ns16k | ns32k \ - | or32 \ - | pdp10 | pdp11 | pj | pjl \ - | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ - | pyramid \ - | score \ - | sh | sh[1234] | sh[24]a | sh[23]e | sh[34]eb | sheb | shbe | shle | sh[1234]le | sh3ele \ - | sh64 | sh64le \ - | sparc | sparc64 | sparc64b | sparc64v | sparc86x | sparclet | sparclite \ - | sparcv8 | sparcv9 | sparcv9b | sparcv9v \ - | spu | strongarm \ - | tahoe | thumb | tic4x | tic80 | tron \ - | v850 | v850e \ - | we32k \ - | x86 | xc16x | xscale | xscalee[bl] | xstormy16 | xtensa \ - | z8k) - basic_machine=$basic_machine-unknown - ;; - m6811 | m68hc11 | m6812 | m68hc12) - # Motorola 68HC11/12. - basic_machine=$basic_machine-unknown - os=-none - ;; - m88110 | m680[12346]0 | m683?2 | m68360 | m5200 | v70 | w65 | z8k) - ;; - ms1) - basic_machine=mt-unknown - ;; - - # We use `pc' rather than `unknown' - # because (1) that's what they normally are, and - # (2) the word "unknown" tends to confuse beginning users. - i*86 | x86_64) - basic_machine=$basic_machine-pc - ;; - # Object if more than one company name word. - *-*-*) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; - # Recognize the basic CPU types with company name. - 580-* \ - | a29k-* \ - | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ - | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ - | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ - | arm-* | armbe-* | armle-* | armeb-* | armv*-* \ - | avr-* | avr32-* \ - | bfin-* | bs2000-* \ - | c[123]* | c30-* | [cjt]90-* | c4x-* | c54x-* | c55x-* | c6x-* \ - | clipper-* | craynv-* | cydra-* \ - | d10v-* | d30v-* | dlx-* \ - | elxsi-* \ - | f30[01]-* | f700-* | fido-* | fr30-* | frv-* | fx80-* \ - | h8300-* | h8500-* \ - | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ - | i*86-* | i860-* | i960-* | ia64-* \ - | ip2k-* | iq2000-* \ - | m32c-* | m32r-* | m32rle-* \ - | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ - | m88110-* | m88k-* | maxq-* | mcore-* \ - | mips-* | mipsbe-* | mipseb-* | mipsel-* | mipsle-* \ - | mips16-* \ - | mips64-* | mips64el-* \ - | mips64vr-* | mips64vrel-* \ - | mips64orion-* | mips64orionel-* \ - | mips64vr4100-* | mips64vr4100el-* \ - | mips64vr4300-* | mips64vr4300el-* \ - | mips64vr5000-* | mips64vr5000el-* \ - | mips64vr5900-* | mips64vr5900el-* \ - | mipsisa32-* | mipsisa32el-* \ - | mipsisa32r2-* | mipsisa32r2el-* \ - | mipsisa64-* | mipsisa64el-* \ - | mipsisa64r2-* | mipsisa64r2el-* \ - | mipsisa64sb1-* | mipsisa64sb1el-* \ - | mipsisa64sr71k-* | mipsisa64sr71kel-* \ - | mipstx39-* | mipstx39el-* \ - | mmix-* \ - | mt-* \ - | msp430-* \ - | nios-* | nios2-* \ - | none-* | np1-* | ns16k-* | ns32k-* \ - | orion-* \ - | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ - | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ - | pyramid-* \ - | romp-* | rs6000-* \ - | sh-* | sh[1234]-* | sh[24]a-* | sh[23]e-* | sh[34]eb-* | sheb-* | shbe-* \ - | shle-* | sh[1234]le-* | sh3ele-* | sh64-* | sh64le-* \ - | sparc-* | sparc64-* | sparc64b-* | sparc64v-* | sparc86x-* | sparclet-* \ - | sparclite-* \ - | sparcv8-* | sparcv9-* | sparcv9b-* | sparcv9v-* | strongarm-* | sv1-* | sx?-* \ - | tahoe-* | thumb-* \ - | tic30-* | tic4x-* | tic54x-* | tic55x-* | tic6x-* | tic80-* \ - | tron-* \ - | v850-* | v850e-* | vax-* \ - | we32k-* \ - | x86-* | x86_64-* | xc16x-* | xps100-* | xscale-* | xscalee[bl]-* \ - | xstormy16-* | xtensa-* \ - | ymp-* \ - | z8k-*) - ;; - # Recognize the various machine names and aliases which stand - # for a CPU type and a company and sometimes even an OS. - 386bsd) - basic_machine=i386-unknown - os=-bsd - ;; - 3b1 | 7300 | 7300-att | att-7300 | pc7300 | safari | unixpc) - basic_machine=m68000-att - ;; - 3b*) - basic_machine=we32k-att - ;; - a29khif) - basic_machine=a29k-amd - os=-udi - ;; - abacus) - basic_machine=abacus-unknown - ;; - adobe68k) - basic_machine=m68010-adobe - os=-scout - ;; - alliant | fx80) - basic_machine=fx80-alliant - ;; - altos | altos3068) - basic_machine=m68k-altos - ;; - am29k) - basic_machine=a29k-none - os=-bsd - ;; - amd64) - basic_machine=x86_64-pc - ;; - amd64-*) - basic_machine=x86_64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - amdahl) - basic_machine=580-amdahl - os=-sysv - ;; - amiga | amiga-*) - basic_machine=m68k-unknown - ;; - amigaos | amigados) - basic_machine=m68k-unknown - os=-amigaos - ;; - amigaunix | amix) - basic_machine=m68k-unknown - os=-sysv4 - ;; - apollo68) - basic_machine=m68k-apollo - os=-sysv - ;; - apollo68bsd) - basic_machine=m68k-apollo - os=-bsd - ;; - aux) - basic_machine=m68k-apple - os=-aux - ;; - balance) - basic_machine=ns32k-sequent - os=-dynix - ;; - c90) - basic_machine=c90-cray - os=-unicos - ;; - convex-c1) - basic_machine=c1-convex - os=-bsd - ;; - convex-c2) - basic_machine=c2-convex - os=-bsd - ;; - convex-c32) - basic_machine=c32-convex - os=-bsd - ;; - convex-c34) - basic_machine=c34-convex - os=-bsd - ;; - convex-c38) - basic_machine=c38-convex - os=-bsd - ;; - cray | j90) - basic_machine=j90-cray - os=-unicos - ;; - craynv) - basic_machine=craynv-cray - os=-unicosmp - ;; - cr16c) - basic_machine=cr16c-unknown - os=-elf - ;; - crds | unos) - basic_machine=m68k-crds - ;; - crisv32 | crisv32-* | etraxfs*) - basic_machine=crisv32-axis - ;; - cris | cris-* | etrax*) - basic_machine=cris-axis - ;; - crx) - basic_machine=crx-unknown - os=-elf - ;; - da30 | da30-*) - basic_machine=m68k-da30 - ;; - decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) - basic_machine=mips-dec - ;; - decsystem10* | dec10*) - basic_machine=pdp10-dec - os=-tops10 - ;; - decsystem20* | dec20*) - basic_machine=pdp10-dec - os=-tops20 - ;; - delta | 3300 | motorola-3300 | motorola-delta \ - | 3300-motorola | delta-motorola) - basic_machine=m68k-motorola - ;; - delta88) - basic_machine=m88k-motorola - os=-sysv3 - ;; - djgpp) - basic_machine=i586-pc - os=-msdosdjgpp - ;; - dpx20 | dpx20-*) - basic_machine=rs6000-bull - os=-bosx - ;; - dpx2* | dpx2*-bull) - basic_machine=m68k-bull - os=-sysv3 - ;; - ebmon29k) - basic_machine=a29k-amd - os=-ebmon - ;; - elxsi) - basic_machine=elxsi-elxsi - os=-bsd - ;; - encore | umax | mmax) - basic_machine=ns32k-encore - ;; - es1800 | OSE68k | ose68k | ose | OSE) - basic_machine=m68k-ericsson - os=-ose - ;; - fx2800) - basic_machine=i860-alliant - ;; - genix) - basic_machine=ns32k-ns - ;; - gmicro) - basic_machine=tron-gmicro - os=-sysv - ;; - go32) - basic_machine=i386-pc - os=-go32 - ;; - h3050r* | hiux*) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - h8300hms) - basic_machine=h8300-hitachi - os=-hms - ;; - h8300xray) - basic_machine=h8300-hitachi - os=-xray - ;; - h8500hms) - basic_machine=h8500-hitachi - os=-hms - ;; - harris) - basic_machine=m88k-harris - os=-sysv3 - ;; - hp300-*) - basic_machine=m68k-hp - ;; - hp300bsd) - basic_machine=m68k-hp - os=-bsd - ;; - hp300hpux) - basic_machine=m68k-hp - os=-hpux - ;; - hp3k9[0-9][0-9] | hp9[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k2[0-9][0-9] | hp9k31[0-9]) - basic_machine=m68000-hp - ;; - hp9k3[2-9][0-9]) - basic_machine=m68k-hp - ;; - hp9k6[0-9][0-9] | hp6[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hp9k7[0-79][0-9] | hp7[0-79][0-9]) - basic_machine=hppa1.1-hp - ;; - hp9k78[0-9] | hp78[0-9]) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[67]1 | hp8[67]1 | hp9k80[24] | hp80[24] | hp9k8[78]9 | hp8[78]9 | hp9k893 | hp893) - # FIXME: really hppa2.0-hp - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][13679] | hp8[0-9][13679]) - basic_machine=hppa1.1-hp - ;; - hp9k8[0-9][0-9] | hp8[0-9][0-9]) - basic_machine=hppa1.0-hp - ;; - hppa-next) - os=-nextstep3 - ;; - hppaosf) - basic_machine=hppa1.1-hp - os=-osf - ;; - hppro) - basic_machine=hppa1.1-hp - os=-proelf - ;; - i370-ibm* | ibm*) - basic_machine=i370-ibm - ;; -# I'm not sure what "Sysv32" means. Should this be sysv3.2? - i*86v32) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv32 - ;; - i*86v4*) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv4 - ;; - i*86v) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-sysv - ;; - i*86sol2) - basic_machine=`echo $1 | sed -e 's/86.*/86-pc/'` - os=-solaris2 - ;; - i386mach) - basic_machine=i386-mach - os=-mach - ;; - i386-vsta | vsta) - basic_machine=i386-unknown - os=-vsta - ;; - iris | iris4d) - basic_machine=mips-sgi - case $os in - -irix*) - ;; - *) - os=-irix4 - ;; - esac - ;; - isi68 | isi) - basic_machine=m68k-isi - os=-sysv - ;; - m88k-omron*) - basic_machine=m88k-omron - ;; - magnum | m3230) - basic_machine=mips-mips - os=-sysv - ;; - merlin) - basic_machine=ns32k-utek - os=-sysv - ;; - mingw32) - basic_machine=i386-pc - os=-mingw32 - ;; - mingw32ce) - basic_machine=arm-unknown - os=-mingw32ce - ;; - miniframe) - basic_machine=m68000-convergent - ;; - *mint | -mint[0-9]* | *MiNT | *MiNT[0-9]*) - basic_machine=m68k-atari - os=-mint - ;; - mips3*-*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` - ;; - mips3*) - basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'`-unknown - ;; - monitor) - basic_machine=m68k-rom68k - os=-coff - ;; - morphos) - basic_machine=powerpc-unknown - os=-morphos - ;; - msdos) - basic_machine=i386-pc - os=-msdos - ;; - ms1-*) - basic_machine=`echo $basic_machine | sed -e 's/ms1-/mt-/'` - ;; - mvs) - basic_machine=i370-ibm - os=-mvs - ;; - ncr3000) - basic_machine=i486-ncr - os=-sysv4 - ;; - netbsd386) - basic_machine=i386-unknown - os=-netbsd - ;; - netwinder) - basic_machine=armv4l-rebel - os=-linux - ;; - news | news700 | news800 | news900) - basic_machine=m68k-sony - os=-newsos - ;; - news1000) - basic_machine=m68030-sony - os=-newsos - ;; - news-3600 | risc-news) - basic_machine=mips-sony - os=-newsos - ;; - necv70) - basic_machine=v70-nec - os=-sysv - ;; - next | m*-next ) - basic_machine=m68k-next - case $os in - -nextstep* ) - ;; - -ns2*) - os=-nextstep2 - ;; - *) - os=-nextstep3 - ;; - esac - ;; - nh3000) - basic_machine=m68k-harris - os=-cxux - ;; - nh[45]000) - basic_machine=m88k-harris - os=-cxux - ;; - nindy960) - basic_machine=i960-intel - os=-nindy - ;; - mon960) - basic_machine=i960-intel - os=-mon960 - ;; - nonstopux) - basic_machine=mips-compaq - os=-nonstopux - ;; - np1) - basic_machine=np1-gould - ;; - nsr-tandem) - basic_machine=nsr-tandem - ;; - op50n-* | op60c-*) - basic_machine=hppa1.1-oki - os=-proelf - ;; - openrisc | openrisc-*) - basic_machine=or32-unknown - ;; - os400) - basic_machine=powerpc-ibm - os=-os400 - ;; - OSE68000 | ose68000) - basic_machine=m68000-ericsson - os=-ose - ;; - os68k) - basic_machine=m68k-none - os=-os68k - ;; - pa-hitachi) - basic_machine=hppa1.1-hitachi - os=-hiuxwe2 - ;; - paragon) - basic_machine=i860-intel - os=-osf - ;; - pbd) - basic_machine=sparc-tti - ;; - pbb) - basic_machine=m68k-tti - ;; - pc532 | pc532-*) - basic_machine=ns32k-pc532 - ;; - pc98) - basic_machine=i386-pc - ;; - pc98-*) - basic_machine=i386-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentium | p5 | k5 | k6 | nexgen | viac3) - basic_machine=i586-pc - ;; - pentiumpro | p6 | 6x86 | athlon | athlon_*) - basic_machine=i686-pc - ;; - pentiumii | pentium2 | pentiumiii | pentium3) - basic_machine=i686-pc - ;; - pentium4) - basic_machine=i786-pc - ;; - pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) - basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumpro-* | p6-* | 6x86-* | athlon-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentiumii-* | pentium2-* | pentiumiii-* | pentium3-*) - basic_machine=i686-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pentium4-*) - basic_machine=i786-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - pn) - basic_machine=pn-gould - ;; - power) basic_machine=power-ibm - ;; - ppc) basic_machine=powerpc-unknown - ;; - ppc-*) basic_machine=powerpc-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppcle | powerpclittle | ppc-le | powerpc-little) - basic_machine=powerpcle-unknown - ;; - ppcle-* | powerpclittle-*) - basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64) basic_machine=powerpc64-unknown - ;; - ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ppc64le | powerpc64little | ppc64-le | powerpc64-little) - basic_machine=powerpc64le-unknown - ;; - ppc64le-* | powerpc64little-*) - basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` - ;; - ps2) - basic_machine=i386-ibm - ;; - pw32) - basic_machine=i586-unknown - os=-pw32 - ;; - rdos) - basic_machine=i386-pc - os=-rdos - ;; - rom68k) - basic_machine=m68k-rom68k - os=-coff - ;; - rm[46]00) - basic_machine=mips-siemens - ;; - rtpc | rtpc-*) - basic_machine=romp-ibm - ;; - s390 | s390-*) - basic_machine=s390-ibm - ;; - s390x | s390x-*) - basic_machine=s390x-ibm - ;; - sa29200) - basic_machine=a29k-amd - os=-udi - ;; - sb1) - basic_machine=mipsisa64sb1-unknown - ;; - sb1el) - basic_machine=mipsisa64sb1el-unknown - ;; - sde) - basic_machine=mipsisa32-sde - os=-elf - ;; - sei) - basic_machine=mips-sei - os=-seiux - ;; - sequent) - basic_machine=i386-sequent - ;; - sh) - basic_machine=sh-hitachi - os=-hms - ;; - sh5el) - basic_machine=sh5le-unknown - ;; - sh64) - basic_machine=sh64-unknown - ;; - sparclite-wrs | simso-wrs) - basic_machine=sparclite-wrs - os=-vxworks - ;; - sps7) - basic_machine=m68k-bull - os=-sysv2 - ;; - spur) - basic_machine=spur-unknown - ;; - st2000) - basic_machine=m68k-tandem - ;; - stratus) - basic_machine=i860-stratus - os=-sysv4 - ;; - sun2) - basic_machine=m68000-sun - ;; - sun2os3) - basic_machine=m68000-sun - os=-sunos3 - ;; - sun2os4) - basic_machine=m68000-sun - os=-sunos4 - ;; - sun3os3) - basic_machine=m68k-sun - os=-sunos3 - ;; - sun3os4) - basic_machine=m68k-sun - os=-sunos4 - ;; - sun4os3) - basic_machine=sparc-sun - os=-sunos3 - ;; - sun4os4) - basic_machine=sparc-sun - os=-sunos4 - ;; - sun4sol2) - basic_machine=sparc-sun - os=-solaris2 - ;; - sun3 | sun3-*) - basic_machine=m68k-sun - ;; - sun4) - basic_machine=sparc-sun - ;; - sun386 | sun386i | roadrunner) - basic_machine=i386-sun - ;; - sv1) - basic_machine=sv1-cray - os=-unicos - ;; - symmetry) - basic_machine=i386-sequent - os=-dynix - ;; - t3e) - basic_machine=alphaev5-cray - os=-unicos - ;; - t90) - basic_machine=t90-cray - os=-unicos - ;; - tic54x | c54x*) - basic_machine=tic54x-unknown - os=-coff - ;; - tic55x | c55x*) - basic_machine=tic55x-unknown - os=-coff - ;; - tic6x | c6x*) - basic_machine=tic6x-unknown - os=-coff - ;; - tx39) - basic_machine=mipstx39-unknown - ;; - tx39el) - basic_machine=mipstx39el-unknown - ;; - tile*) - basic_machine=tile-tilera - os=-linux-gnu - ;; - toad1) - basic_machine=pdp10-xkl - os=-tops20 - ;; - tower | tower-32) - basic_machine=m68k-ncr - ;; - tpf) - basic_machine=s390x-ibm - os=-tpf - ;; - udi29k) - basic_machine=a29k-amd - os=-udi - ;; - ultra3) - basic_machine=a29k-nyu - os=-sym1 - ;; - v810 | necv810) - basic_machine=v810-nec - os=-none - ;; - vaxv) - basic_machine=vax-dec - os=-sysv - ;; - vms) - basic_machine=vax-dec - os=-vms - ;; - vpp*|vx|vx-*) - basic_machine=f301-fujitsu - ;; - vxworks960) - basic_machine=i960-wrs - os=-vxworks - ;; - vxworks68) - basic_machine=m68k-wrs - os=-vxworks - ;; - vxworks29k) - basic_machine=a29k-wrs - os=-vxworks - ;; - w65*) - basic_machine=w65-wdc - os=-none - ;; - w89k-*) - basic_machine=hppa1.1-winbond - os=-proelf - ;; - xbox) - basic_machine=i686-pc - os=-mingw32 - ;; - xps | xps100) - basic_machine=xps100-honeywell - ;; - ymp) - basic_machine=ymp-cray - os=-unicos - ;; - z8k-*-coff) - basic_machine=z8k-unknown - os=-sim - ;; - none) - basic_machine=none-none - os=-none - ;; - -# Here we handle the default manufacturer of certain CPU types. It is in -# some cases the only manufacturer, in others, it is the most popular. - w89k) - basic_machine=hppa1.1-winbond - ;; - op50n) - basic_machine=hppa1.1-oki - ;; - op60c) - basic_machine=hppa1.1-oki - ;; - romp) - basic_machine=romp-ibm - ;; - mmix) - basic_machine=mmix-knuth - ;; - rs6000) - basic_machine=rs6000-ibm - ;; - vax) - basic_machine=vax-dec - ;; - pdp10) - # there are many clones, so DEC is not a safe bet - basic_machine=pdp10-unknown - ;; - pdp11) - basic_machine=pdp11-dec - ;; - we32k) - basic_machine=we32k-att - ;; - sh[1234] | sh[24]a | sh[34]eb | sh[1234]le | sh[23]ele) - basic_machine=sh-unknown - ;; - sparc | sparcv8 | sparcv9 | sparcv9b | sparcv9v) - basic_machine=sparc-sun - ;; - cydra) - basic_machine=cydra-cydrome - ;; - orion) - basic_machine=orion-highlevel - ;; - orion105) - basic_machine=clipper-highlevel - ;; - mac | mpw | mac-mpw) - basic_machine=m68k-apple - ;; - pmac | pmac-mpw) - basic_machine=powerpc-apple - ;; - *-unknown) - # Make sure to match an already-canonicalized machine name. - ;; - *) - echo Invalid configuration \`$1\': machine \`$basic_machine\' not recognized 1>&2 - exit 1 - ;; -esac - -# Here we canonicalize certain aliases for manufacturers. -case $basic_machine in - *-digital*) - basic_machine=`echo $basic_machine | sed 's/digital.*/dec/'` - ;; - *-commodore*) - basic_machine=`echo $basic_machine | sed 's/commodore.*/cbm/'` - ;; - *) - ;; -esac - -# Decode manufacturer-specific aliases for certain operating systems. - -if [ x"$os" != x"" ] -then -case $os in - # First match some system type aliases - # that might get confused with valid system types. - # -solaris* is a basic system type, with this one exception. - -solaris1 | -solaris1.*) - os=`echo $os | sed -e 's|solaris1|sunos4|'` - ;; - -solaris) - os=-solaris2 - ;; - -svr4*) - os=-sysv4 - ;; - -unixware*) - os=-sysv4.2uw - ;; - -gnu/linux*) - os=`echo $os | sed -e 's|gnu/linux|linux-gnu|'` - ;; - # First accept the basic system types. - # The portable systems comes first. - # Each alternative MUST END IN A *, to match a version number. - # -sysv* is not here because it comes later, after sysvr4. - -gnu* | -bsd* | -mach* | -minix* | -genix* | -ultrix* | -irix* \ - | -*vms* | -sco* | -esix* | -isc* | -aix* | -sunos | -sunos[34]*\ - | -hpux* | -unos* | -osf* | -luna* | -dgux* | -solaris* | -sym* \ - | -amigaos* | -amigados* | -msdos* | -newsos* | -unicos* | -aof* \ - | -aos* \ - | -nindy* | -vxsim* | -vxworks* | -ebmon* | -hms* | -mvs* \ - | -clix* | -riscos* | -uniplus* | -iris* | -rtu* | -xenix* \ - | -hiux* | -386bsd* | -knetbsd* | -mirbsd* | -netbsd* \ - | -openbsd* | -solidbsd* \ - | -ekkobsd* | -kfreebsd* | -freebsd* | -riscix* | -lynxos* \ - | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ - | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ - | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ - | -chorusos* | -chorusrdb* \ - | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ - | -mingw32* | -linux-gnu* | -linux-newlib* | -linux-uclibc* \ - | -uxpv* | -beos* | -mpeix* | -udk* \ - | -interix* | -uwin* | -mks* | -rhapsody* | -darwin* | -opened* \ - | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ - | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ - | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ - | -morphos* | -superux* | -rtmk* | -rtmk-nova* | -windiss* \ - | -powermax* | -dnix* | -nx6 | -nx7 | -sei* | -dragonfly* \ - | -skyos* | -haiku* | -rdos* | -toppers* | -drops*) - # Remember, each alternative MUST END IN *, to match a version number. - ;; - -qnx*) - case $basic_machine in - x86-* | i*86-*) - ;; - *) - os=-nto$os - ;; - esac - ;; - -nto-qnx*) - ;; - -nto*) - os=`echo $os | sed -e 's|nto|nto-qnx|'` - ;; - -sim | -es1800* | -hms* | -xray | -os68k* | -none* | -v88r* \ - | -windows* | -osx | -abug | -netware* | -os9* | -beos* | -haiku* \ - | -macos* | -mpw* | -magic* | -mmixware* | -mon960* | -lnews*) - ;; - -mac*) - os=`echo $os | sed -e 's|mac|macos|'` - ;; - -linux-dietlibc) - os=-linux-dietlibc - ;; - -linux*) - os=`echo $os | sed -e 's|linux|linux-gnu|'` - ;; - -sunos5*) - os=`echo $os | sed -e 's|sunos5|solaris2|'` - ;; - -sunos6*) - os=`echo $os | sed -e 's|sunos6|solaris3|'` - ;; - -opened*) - os=-openedition - ;; - -os400*) - os=-os400 - ;; - -wince*) - os=-wince - ;; - -osfrose*) - os=-osfrose - ;; - -osf*) - os=-osf - ;; - -utek*) - os=-bsd - ;; - -dynix*) - os=-bsd - ;; - -acis*) - os=-aos - ;; - -atheos*) - os=-atheos - ;; - -syllable*) - os=-syllable - ;; - -386bsd) - os=-bsd - ;; - -ctix* | -uts*) - os=-sysv - ;; - -nova*) - os=-rtmk-nova - ;; - -ns2 ) - os=-nextstep2 - ;; - -nsk*) - os=-nsk - ;; - # Preserve the version number of sinix5. - -sinix5.*) - os=`echo $os | sed -e 's|sinix|sysv|'` - ;; - -sinix*) - os=-sysv4 - ;; - -tpf*) - os=-tpf - ;; - -triton*) - os=-sysv3 - ;; - -oss*) - os=-sysv3 - ;; - -svr4) - os=-sysv4 - ;; - -svr3) - os=-sysv3 - ;; - -sysvr4) - os=-sysv4 - ;; - # This must come after -sysvr4. - -sysv*) - ;; - -ose*) - os=-ose - ;; - -es1800*) - os=-ose - ;; - -xenix) - os=-xenix - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - os=-mint - ;; - -aros*) - os=-aros - ;; - -kaos*) - os=-kaos - ;; - -zvmoe) - os=-zvmoe - ;; - -none) - ;; - *) - # Get rid of the `-' at the beginning of $os. - os=`echo $os | sed 's/[^-]*-//'` - echo Invalid configuration \`$1\': system \`$os\' not recognized 1>&2 - exit 1 - ;; -esac -else - -# Here we handle the default operating systems that come with various machines. -# The value should be what the vendor currently ships out the door with their -# machine or put another way, the most popular os provided with the machine. - -# Note that if you're going to try to match "-MANUFACTURER" here (say, -# "-sun"), then you have to tell the case statement up towards the top -# that MANUFACTURER isn't an operating system. Otherwise, code above -# will signal an error saying that MANUFACTURER isn't an operating -# system, and we'll never get to this point. - -case $basic_machine in - score-*) - os=-elf - ;; - spu-*) - os=-elf - ;; - *-acorn) - os=-riscix1.2 - ;; - arm*-rebel) - os=-linux - ;; - arm*-semi) - os=-aout - ;; - c4x-* | tic4x-*) - os=-coff - ;; - # This must come before the *-dec entry. - pdp10-*) - os=-tops20 - ;; - pdp11-*) - os=-none - ;; - *-dec | vax-*) - os=-ultrix4.2 - ;; - m68*-apollo) - os=-domain - ;; - i386-sun) - os=-sunos4.0.2 - ;; - m68000-sun) - os=-sunos3 - # This also exists in the configure program, but was not the - # default. - # os=-sunos4 - ;; - m68*-cisco) - os=-aout - ;; - mep-*) - os=-elf - ;; - mips*-cisco) - os=-elf - ;; - mips*-*) - os=-elf - ;; - or32-*) - os=-coff - ;; - *-tti) # must be before sparc entry or we get the wrong os. - os=-sysv3 - ;; - sparc-* | *-sun) - os=-sunos4.1.1 - ;; - *-be) - os=-beos - ;; - *-haiku) - os=-haiku - ;; - *-ibm) - os=-aix - ;; - *-knuth) - os=-mmixware - ;; - *-wec) - os=-proelf - ;; - *-winbond) - os=-proelf - ;; - *-oki) - os=-proelf - ;; - *-hp) - os=-hpux - ;; - *-hitachi) - os=-hiux - ;; - i860-* | *-att | *-ncr | *-altos | *-motorola | *-convergent) - os=-sysv - ;; - *-cbm) - os=-amigaos - ;; - *-dg) - os=-dgux - ;; - *-dolphin) - os=-sysv3 - ;; - m68k-ccur) - os=-rtu - ;; - m88k-omron*) - os=-luna - ;; - *-next ) - os=-nextstep - ;; - *-sequent) - os=-ptx - ;; - *-crds) - os=-unos - ;; - *-ns) - os=-genix - ;; - i370-*) - os=-mvs - ;; - *-next) - os=-nextstep3 - ;; - *-gould) - os=-sysv - ;; - *-highlevel) - os=-bsd - ;; - *-encore) - os=-bsd - ;; - *-sgi) - os=-irix - ;; - *-siemens) - os=-sysv4 - ;; - *-masscomp) - os=-rtu - ;; - f30[01]-fujitsu | f700-fujitsu) - os=-uxpv - ;; - *-rom68k) - os=-coff - ;; - *-*bug) - os=-coff - ;; - *-apple) - os=-macos - ;; - *-atari*) - os=-mint - ;; - *) - os=-none - ;; -esac -fi - -# Here we handle the case where we know the os, and the CPU type, but not the -# manufacturer. We pick the logical manufacturer. -vendor=unknown -case $basic_machine in - *-unknown) - case $os in - -riscix*) - vendor=acorn - ;; - -sunos*) - vendor=sun - ;; - -aix*) - vendor=ibm - ;; - -beos*) - vendor=be - ;; - -hpux*) - vendor=hp - ;; - -mpeix*) - vendor=hp - ;; - -hiux*) - vendor=hitachi - ;; - -unos*) - vendor=crds - ;; - -dgux*) - vendor=dg - ;; - -luna*) - vendor=omron - ;; - -genix*) - vendor=ns - ;; - -mvs* | -opened*) - vendor=ibm - ;; - -os400*) - vendor=ibm - ;; - -ptx*) - vendor=sequent - ;; - -tpf*) - vendor=ibm - ;; - -vxsim* | -vxworks* | -windiss*) - vendor=wrs - ;; - -aux*) - vendor=apple - ;; - -hms*) - vendor=hitachi - ;; - -mpw* | -macos*) - vendor=apple - ;; - -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) - vendor=atari - ;; - -vos*) - vendor=stratus - ;; - esac - basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` - ;; -esac - -echo $basic_machine$os -exit - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "timestamp='" -# time-stamp-format: "%:y-%02m-%02d" -# time-stamp-end: "'" -# End: diff --git a/lib/diameter/autoconf/install-sh b/lib/diameter/autoconf/install-sh deleted file mode 100755 index a5897de6ea..0000000000 --- a/lib/diameter/autoconf/install-sh +++ /dev/null @@ -1,519 +0,0 @@ -#!/bin/sh -# install - install a program, script, or datafile - -scriptversion=2006-12-25.00 - -# This originates from X11R5 (mit/util/scripts/install.sh), which was -# later released in X11R6 (xc/config/util/install.sh) with the -# following copyright and license. -# -# Copyright (C) 1994 X Consortium -# -# Permission is hereby granted, free of charge, to any person obtaining a copy -# of this software and associated documentation files (the "Software"), to -# deal in the Software without restriction, including without limitation the -# rights to use, copy, modify, merge, publish, distribute, sublicense, and/or -# sell copies of the Software, and to permit persons to whom the Software is -# furnished to do so, subject to the following conditions: -# -# The above copyright notice and this permission notice shall be included in -# all copies or substantial portions of the Software. -# -# THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR -# IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, -# FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE -# X CONSORTIUM BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN -# AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNEC- -# TION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. -# -# Except as contained in this notice, the name of the X Consortium shall not -# be used in advertising or otherwise to promote the sale, use or other deal- -# ings in this Software without prior written authorization from the X Consor- -# tium. -# -# -# FSF changes to this file are in the public domain. -# -# Calling this script install-sh is preferred over install.sh, to prevent -# `make' implicit rules from creating a file called install from it -# when there is no Makefile. -# -# This script is compatible with the BSD install script, but was written -# from scratch. - -nl=' -' -IFS=" "" $nl" - -# set DOITPROG to echo to test this script - -# Don't use :- since 4.3BSD and earlier shells don't like it. -doit=${DOITPROG-} -if test -z "$doit"; then - doit_exec=exec -else - doit_exec=$doit -fi - -# Put in absolute file names if you don't have them in your path; -# or use environment vars. - -chgrpprog=${CHGRPPROG-chgrp} -chmodprog=${CHMODPROG-chmod} -chownprog=${CHOWNPROG-chown} -cmpprog=${CMPPROG-cmp} -cpprog=${CPPROG-cp} -mkdirprog=${MKDIRPROG-mkdir} -mvprog=${MVPROG-mv} -rmprog=${RMPROG-rm} -stripprog=${STRIPPROG-strip} - -posix_glob='?' -initialize_posix_glob=' - test "$posix_glob" != "?" || { - if (set -f) 2>/dev/null; then - posix_glob= - else - posix_glob=: - fi - } -' - -posix_mkdir= - -# Desired mode of installed file. -mode=0755 - -chgrpcmd= -chmodcmd=$chmodprog -chowncmd= -mvcmd=$mvprog -rmcmd="$rmprog -f" -stripcmd= - -src= -dst= -dir_arg= -dst_arg= - -copy_on_change=false -no_target_directory= - -usage="\ -Usage: $0 [OPTION]... [-T] SRCFILE DSTFILE - or: $0 [OPTION]... SRCFILES... DIRECTORY - or: $0 [OPTION]... -t DIRECTORY SRCFILES... - or: $0 [OPTION]... -d DIRECTORIES... - -In the 1st form, copy SRCFILE to DSTFILE. -In the 2nd and 3rd, copy all SRCFILES to DIRECTORY. -In the 4th, create DIRECTORIES. - -Options: - --help display this help and exit. - --version display version info and exit. - - -c (ignored) - -C install only if different (preserve the last data modification time) - -d create directories instead of installing files. - -g GROUP $chgrpprog installed files to GROUP. - -m MODE $chmodprog installed files to MODE. - -o USER $chownprog installed files to USER. - -s $stripprog installed files. - -t DIRECTORY install into DIRECTORY. - -T report an error if DSTFILE is a directory. - -Environment variables override the default commands: - CHGRPPROG CHMODPROG CHOWNPROG CMPPROG CPPROG MKDIRPROG MVPROG - RMPROG STRIPPROG -" - -while test $# -ne 0; do - case $1 in - -c) ;; - - -C) copy_on_change=true;; - - -d) dir_arg=true;; - - -g) chgrpcmd="$chgrpprog $2" - shift;; - - --help) echo "$usage"; exit $?;; - - -m) mode=$2 - case $mode in - *' '* | *' '* | *' -'* | *'*'* | *'?'* | *'['*) - echo "$0: invalid mode: $mode" >&2 - exit 1;; - esac - shift;; - - -o) chowncmd="$chownprog $2" - shift;; - - -s) stripcmd=$stripprog;; - - -t) dst_arg=$2 - shift;; - - -T) no_target_directory=true;; - - --version) echo "$0 $scriptversion"; exit $?;; - - --) shift - break;; - - -*) echo "$0: invalid option: $1" >&2 - exit 1;; - - *) break;; - esac - shift -done - -if test $# -ne 0 && test -z "$dir_arg$dst_arg"; then - # When -d is used, all remaining arguments are directories to create. - # When -t is used, the destination is already specified. - # Otherwise, the last argument is the destination. Remove it from $@. - for arg - do - if test -n "$dst_arg"; then - # $@ is not empty: it contains at least $arg. - set fnord "$@" "$dst_arg" - shift # fnord - fi - shift # arg - dst_arg=$arg - done -fi - -if test $# -eq 0; then - if test -z "$dir_arg"; then - echo "$0: no input file specified." >&2 - exit 1 - fi - # It's OK to call `install-sh -d' without argument. - # This can happen when creating conditional directories. - exit 0 -fi - -if test -z "$dir_arg"; then - trap '(exit $?); exit' 1 2 13 15 - - # Set umask so as not to create temps with too-generous modes. - # However, 'strip' requires both read and write access to temps. - case $mode in - # Optimize common cases. - *644) cp_umask=133;; - *755) cp_umask=22;; - - *[0-7]) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw='% 200' - fi - cp_umask=`expr '(' 777 - $mode % 1000 ')' $u_plus_rw`;; - *) - if test -z "$stripcmd"; then - u_plus_rw= - else - u_plus_rw=,u+rw - fi - cp_umask=$mode$u_plus_rw;; - esac -fi - -for src -do - # Protect names starting with `-'. - case $src in - -*) src=./$src;; - esac - - if test -n "$dir_arg"; then - dst=$src - dstdir=$dst - test -d "$dstdir" - dstdir_status=$? - else - - # Waiting for this to be detected by the "$cpprog $src $dsttmp" command - # might cause directories to be created, which would be especially bad - # if $src (and thus $dsttmp) contains '*'. - if test ! -f "$src" && test ! -d "$src"; then - echo "$0: $src does not exist." >&2 - exit 1 - fi - - if test -z "$dst_arg"; then - echo "$0: no destination specified." >&2 - exit 1 - fi - - dst=$dst_arg - # Protect names starting with `-'. - case $dst in - -*) dst=./$dst;; - esac - - # If destination is a directory, append the input filename; won't work - # if double slashes aren't ignored. - if test -d "$dst"; then - if test -n "$no_target_directory"; then - echo "$0: $dst_arg: Is a directory" >&2 - exit 1 - fi - dstdir=$dst - dst=$dstdir/`basename "$src"` - dstdir_status=0 - else - # Prefer dirname, but fall back on a substitute if dirname fails. - dstdir=` - (dirname "$dst") 2>/dev/null || - expr X"$dst" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ - X"$dst" : 'X\(//\)[^/]' \| \ - X"$dst" : 'X\(//\)$' \| \ - X"$dst" : 'X\(/\)' \| . 2>/dev/null || - echo X"$dst" | - sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ - s//\1/ - q - } - /^X\(\/\/\)[^/].*/{ - s//\1/ - q - } - /^X\(\/\/\)$/{ - s//\1/ - q - } - /^X\(\/\).*/{ - s//\1/ - q - } - s/.*/./; q' - ` - - test -d "$dstdir" - dstdir_status=$? - fi - fi - - obsolete_mkdir_used=false - - if test $dstdir_status != 0; then - case $posix_mkdir in - '') - # Create intermediate dirs using mode 755 as modified by the umask. - # This is like FreeBSD 'install' as of 1997-10-28. - umask=`umask` - case $stripcmd.$umask in - # Optimize common cases. - *[2367][2367]) mkdir_umask=$umask;; - .*0[02][02] | .[02][02] | .[02]) mkdir_umask=22;; - - *[0-7]) - mkdir_umask=`expr $umask + 22 \ - - $umask % 100 % 40 + $umask % 20 \ - - $umask % 10 % 4 + $umask % 2 - `;; - *) mkdir_umask=$umask,go-w;; - esac - - # With -d, create the new directory with the user-specified mode. - # Otherwise, rely on $mkdir_umask. - if test -n "$dir_arg"; then - mkdir_mode=-m$mode - else - mkdir_mode= - fi - - posix_mkdir=false - case $umask in - *[123567][0-7][0-7]) - # POSIX mkdir -p sets u+wx bits regardless of umask, which - # is incompatible with FreeBSD 'install' when (umask & 300) != 0. - ;; - *) - tmpdir=${TMPDIR-/tmp}/ins$RANDOM-$$ - trap 'ret=$?; rmdir "$tmpdir/d" "$tmpdir" 2>/dev/null; exit $ret' 0 - - if (umask $mkdir_umask && - exec $mkdirprog $mkdir_mode -p -- "$tmpdir/d") >/dev/null 2>&1 - then - if test -z "$dir_arg" || { - # Check for POSIX incompatibilities with -m. - # HP-UX 11.23 and IRIX 6.5 mkdir -m -p sets group- or - # other-writeable bit of parent directory when it shouldn't. - # FreeBSD 6.1 mkdir -m -p sets mode of existing directory. - ls_ld_tmpdir=`ls -ld "$tmpdir"` - case $ls_ld_tmpdir in - d????-?r-*) different_mode=700;; - d????-?--*) different_mode=755;; - *) false;; - esac && - $mkdirprog -m$different_mode -p -- "$tmpdir" && { - ls_ld_tmpdir_1=`ls -ld "$tmpdir"` - test "$ls_ld_tmpdir" = "$ls_ld_tmpdir_1" - } - } - then posix_mkdir=: - fi - rmdir "$tmpdir/d" "$tmpdir" - else - # Remove any dirs left behind by ancient mkdir implementations. - rmdir ./$mkdir_mode ./-p ./-- 2>/dev/null - fi - trap '' 0;; - esac;; - esac - - if - $posix_mkdir && ( - umask $mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir" - ) - then : - else - - # The umask is ridiculous, or mkdir does not conform to POSIX, - # or it failed possibly due to a race condition. Create the - # directory the slow way, step by step, checking for races as we go. - - case $dstdir in - /*) prefix='/';; - -*) prefix='./';; - *) prefix='';; - esac - - eval "$initialize_posix_glob" - - oIFS=$IFS - IFS=/ - $posix_glob set -f - set fnord $dstdir - shift - $posix_glob set +f - IFS=$oIFS - - prefixes= - - for d - do - test -z "$d" && continue - - prefix=$prefix$d - if test -d "$prefix"; then - prefixes= - else - if $posix_mkdir; then - (umask=$mkdir_umask && - $doit_exec $mkdirprog $mkdir_mode -p -- "$dstdir") && break - # Don't fail if two instances are running concurrently. - test -d "$prefix" || exit 1 - else - case $prefix in - *\'*) qprefix=`echo "$prefix" | sed "s/'/'\\\\\\\\''/g"`;; - *) qprefix=$prefix;; - esac - prefixes="$prefixes '$qprefix'" - fi - fi - prefix=$prefix/ - done - - if test -n "$prefixes"; then - # Don't fail if two instances are running concurrently. - (umask $mkdir_umask && - eval "\$doit_exec \$mkdirprog $prefixes") || - test -d "$dstdir" || exit 1 - obsolete_mkdir_used=true - fi - fi - fi - - if test -n "$dir_arg"; then - { test -z "$chowncmd" || $doit $chowncmd "$dst"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dst"; } && - { test "$obsolete_mkdir_used$chowncmd$chgrpcmd" = false || - test -z "$chmodcmd" || $doit $chmodcmd $mode "$dst"; } || exit 1 - else - - # Make a couple of temp file names in the proper directory. - dsttmp=$dstdir/_inst.$$_ - rmtmp=$dstdir/_rm.$$_ - - # Trap to clean up those temp files at exit. - trap 'ret=$?; rm -f "$dsttmp" "$rmtmp" && exit $ret' 0 - - # Copy the file name to the temp name. - (umask $cp_umask && $doit_exec $cpprog "$src" "$dsttmp") && - - # and set any options; do chmod last to preserve setuid bits. - # - # If any of these fail, we abort the whole thing. If we want to - # ignore errors from any of these, just make sure not to ignore - # errors from the above "$doit $cpprog $src $dsttmp" command. - # - { test -z "$chowncmd" || $doit $chowncmd "$dsttmp"; } && - { test -z "$chgrpcmd" || $doit $chgrpcmd "$dsttmp"; } && - { test -z "$stripcmd" || $doit $stripcmd "$dsttmp"; } && - { test -z "$chmodcmd" || $doit $chmodcmd $mode "$dsttmp"; } && - - # If -C, don't bother to copy if it wouldn't change the file. - if $copy_on_change && - old=`LC_ALL=C ls -dlL "$dst" 2>/dev/null` && - new=`LC_ALL=C ls -dlL "$dsttmp" 2>/dev/null` && - - eval "$initialize_posix_glob" && - $posix_glob set -f && - set X $old && old=:$2:$4:$5:$6 && - set X $new && new=:$2:$4:$5:$6 && - $posix_glob set +f && - - test "$old" = "$new" && - $cmpprog "$dst" "$dsttmp" >/dev/null 2>&1 - then - rm -f "$dsttmp" - else - # Rename the file to the real destination. - $doit $mvcmd -f "$dsttmp" "$dst" 2>/dev/null || - - # The rename failed, perhaps because mv can't rename something else - # to itself, or perhaps because mv is so ancient that it does not - # support -f. - { - # Now remove or move aside any old file at destination location. - # We try this two ways since rm can't unlink itself on some - # systems and the destination file might be busy for other - # reasons. In this case, the final cleanup might fail but the new - # file should still install successfully. - { - test ! -f "$dst" || - $doit $rmcmd -f "$dst" 2>/dev/null || - { $doit $mvcmd -f "$dst" "$rmtmp" 2>/dev/null && - { $doit $rmcmd -f "$rmtmp" 2>/dev/null; :; } - } || - { echo "$0: cannot unlink or rename $dst" >&2 - (exit 1); exit 1 - } - } && - - # Now rename the file to the real destination. - $doit $mvcmd "$dsttmp" "$dst" - } - fi || exit 1 - - trap '' 0 - fi -done - -# Local variables: -# eval: (add-hook 'write-file-hooks 'time-stamp) -# time-stamp-start: "scriptversion=" -# time-stamp-format: "%:y-%02m-%02d.%02H" -# time-stamp-end: "$" -# End: diff --git a/lib/diameter/configure.in b/lib/diameter/configure.in deleted file mode 100644 index 8acfb28fed..0000000000 --- a/lib/diameter/configure.in +++ /dev/null @@ -1,137 +0,0 @@ -dnl Process this file with autoconf to produce a configure script. - -dnl %CopyrightBegin% -dnl -dnl Copyright Ericsson AB 1998-2011. All Rights Reserved. -dnl -dnl The contents of this file are subject to the Erlang Public License, -dnl Version 1.1, (the "License"); you may not use this file except in -dnl compliance with the License. You should have received a copy of the -dnl Erlang Public License along with this software. If not, it can be -dnl retrieved online at http://www.erlang.org/. -dnl -dnl Software distributed under the License is distributed on an "AS IS" -dnl basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See -dnl the License for the specific language governing rights and limitations -dnl under the License. -dnl -dnl %CopyrightEnd% - -if test "x$no_recursion" != "xyes" -a "x$OVERRIDE_CONFIG_CACHE" = "x"; then - # We do not want to use a common cache! - cache_file=/dev/null -fi - -AC_INIT(vsn.mk) - -dnl <STANDALONE DIAMETER> -dnl This is needed for diameters own environment to rock, -dnl but since we are now integrated into OTP, we skip it. -dnl In order to build stand-alone we need atleast 2.63... -dnl AC_PREREQ(2.63) -dnl </STANDALONE DIAMETER> - -dnl LM_PRECIOUS_VARS - - -dnl The OTP source tree is the default "top", -dnl but we can also define our own top: DIAMETER_TOP - -if test -n "$ERL_TOP" || test -d $ERL_TOP ; then - erl_top=${ERL_TOP} - AC_CONFIG_AUX_DIRS($erl_top/erts/autoconf) - DIAMETER_TOP=${ERL_TOP}/lib/diameter -else - AC_ARG_VAR(DIAMETER_TOP, [Diameter top source directory]) - if test -n "$DIAMETER_TOP" || test -d $DIAMETER_TOP ; then - AC_CONFIG_AUX_DIRS(autoconf) - fi - - dnl <STANDALONE DIAMETER> - dnl AC_ERLANG_SUBST_ROOT_DIR - dnl AC_ERLANG_SUBST_LIB_DIR - dnl AC_ERLANG_CHECK_LIB([erl_docgen], - dnl [echo "erl_docgen version \"$ERLANG_LIB_VER_erl_docgen\"" - dnl echo "is installed in \"$ERLANG_LIB_DIR_erl_docgen\""], - dnl [AC_MSG_ERROR([erl_docgen was not found!])]) - dnl AC_ERLANG_CHECK_LIB([test_server], - dnl [echo "test_server version \"$ERLANG_LIB_VER_test_server\"" - dnl echo "is installed in \"$ERLANG_LIB_DIR_test_server\""], - dnl [AC_MSG_ERROR([test_server was not found!])]) - dnl </STANDALONE DIAMETER> - -fi - -AC_SUBST(DIAMETER_TOP) -export DIAMETER_TOP - -if test "X$host" != "Xfree_source" -a "X$host" != "Xwin32"; then - AC_CANONICAL_HOST -fi - -TARGET=$host -AC_SUBST(TARGET) - -if test "x$erl_top" = "x"; then - dnl STANDALONE DIAMETER - AC_CHECK_PROGS(XSLTPROC, xsltproc) - if test -z "$XSLTPROC"; then - echo "xsltproc" >> doc/CONF_INFO - AC_MSG_WARN([No 'xsltproc' command found: the documentation can not be built]) - fi - - AC_CHECK_PROGS(FOP, fop) - if test -z "$FOP"; then - AC_MSG_ERROR([No 'fop' command found: the documentation can not be built]) - fi -fi - -dnl -dnl We can live with Solaris /usr/ucb/install -dnl -case $host in - *-*-solaris*|free_source) - if test -x /usr/ucb/install; then - INSTALL="/usr/ucb/install -c" - fi - ;; - *) - ;; -esac -AC_PROG_INSTALL -LM_PROG_INSTALL_DIR - -case $host_os in - darwin*) - dnl Need to preserve modification time on archives; - dnl otherwise, ranlib has to be run on archives - dnl again after installation. - INSTALL_DATA="$INSTALL_DATA -p";; - *) - ;; -esac - -dnl -dnl Fix for Tilera install permissions -dnl - -case $build in - *tile*) - INSTALL_PROGRAM="$INSTALL_PROGRAM -m755" - INSTALL_SCRIPT="$INSTALL_SCRIPT -m755" - ;; - *) - ;; -esac - - -dnl <STANDALONE DIAMETER> -dnl AC_ERLANG_NEED_ERL([$PATH]) -dnl AC_ERLANG_NEED_ERLC([$PATH]) -dnl </STANDALONE DIAMETER> - -AC_OUTPUT( - Makefile:Makefile.in - make/$host/rules.mk:make/rules.mk.in - ) - diff --git a/lib/diameter/doc/.gitignore b/lib/diameter/doc/.gitignore new file mode 100644 index 0000000000..b634bdd7ba --- /dev/null +++ b/lib/diameter/doc/.gitignore @@ -0,0 +1,4 @@ + +/html/ +/man*/ +/pdf/ diff --git a/lib/diameter/doc/src/.gitignore b/lib/diameter/doc/src/.gitignore index feeb378fd8..5776e1cc76 100644 --- a/lib/diameter/doc/src/.gitignore +++ b/lib/diameter/doc/src/.gitignore @@ -1,2 +1,3 @@ /depend.mk +/seehere.ent diff --git a/lib/diameter/doc/src/Makefile b/lib/diameter/doc/src/Makefile index 59ca660797..8ad38ba0d5 100644 --- a/lib/diameter/doc/src/Makefile +++ b/lib/diameter/doc/src/Makefile @@ -16,13 +16,8 @@ # # %CopyrightEnd% -ifneq ($(ERL_TOP),) include $(ERL_TOP)/make/target.mk include $(ERL_TOP)/make/$(TARGET)/otp.mk -else -include $(DIAMETER_TOP)/make/target.mk -include $(DIAMETER_TOP)/make/$(TARGET)/rules.mk -endif include ../../vsn.mk @@ -39,7 +34,8 @@ XML_REF_FILES = $(XML_REF1_FILES) $(XML_REF3_FILES) $(XML_REF4_FILES) XML_FILES = $(BOOK_FILES) $(XML_APPLICATION_FILES) \ $(XML_REF_FILES) \ - $(XML_PART_FILES) $(XML_CHAPTER_FILES) + $(XML_PART_FILES) $(XML_CHAPTER_FILES) \ + seealso.ent INTERNAL_HTML_FILES = $(TECHNICAL_DESCR_FILES:%.xml=$(HTMLDIR)/%.html) @@ -98,7 +94,7 @@ html: gifs $(HTML_REF_MAN_FILE) clean clean_docs: clean_pdf clean_html clean_man rm -f errs core *~ - rm -f depend.mk + rm -f depend.mk seehere.ent clean_pdf: rm -f $(PDFDIR)/* @@ -155,11 +151,8 @@ info: # ---------------------------------------------------- # Release Target # ---------------------------------------------------- -ifneq ($(ERL_TOP),) + include $(ERL_TOP)/make/otp_release_targets.mk -else -include $(DIAMETER_TOP)/make/release_targets.mk -endif release_docs_spec: $(LOCAL)docs $(INSTALL_DIR) "$(RELSYSDIR)/doc/pdf" @@ -178,7 +171,9 @@ release_docs_spec: $(LOCAL)docs release_spec: -depend.mk: depend.sed $(XML_REF_FILES) $(XML_CHAPTER_FILES) Makefile +depend.mk: depend.sed Makefile seealso.ent \ + $(XML_REF_FILES) $(XML_CHAPTER_FILES) + sed -f seehere.sed seealso.ent > seehere.ent (for f in $(XML_REF_FILES) $(XML_CHAPTER_FILES); do \ sed -f $< $$f | sed "s@%FILE%@`basename $$f .xml`@g"; \ done) \ diff --git a/lib/diameter/doc/src/diameter.xml b/lib/diameter/doc/src/diameter.xml index b8652a7482..b7669b760b 100644 --- a/lib/diameter/doc/src/diameter.xml +++ b/lib/diameter/doc/src/diameter.xml @@ -1,5 +1,16 @@ <?xml version="1.0" encoding="latin1" ?> -<!DOCTYPE erlref SYSTEM "erlref.dtd"> +<!DOCTYPE erlref SYSTEM "erlref.dtd" [ + <!ENTITY make_ref + '<seealso marker="erts:erlang#make_ref-0">erlang:make_ref/0</seealso>'> + <!ENTITY transport_module + '<seealso marker="diameter_transport">transport module</seealso>'> + <!ENTITY dictionary + '<seealso marker="diameter_dict">dictionary</seealso>'> + <!ENTITY % also SYSTEM "seealso.ent" > + <!ENTITY % here SYSTEM "seehere.ent" > + %also; + %here; +]> <erlref> <header> @@ -45,19 +56,16 @@ under the License. <p> This module provides the interface with which a user can implement a Diameter node that sends and receives messages using the -Diameter protocol as defined in RFC 3588.</p> +Diameter protocol as defined in &the_rfc;.</p> <p> Basic usage consists of creating a representation of a -locally implemented Diameter node and its capabilities with <seealso -marker="#start_service">start_service/2</seealso>, adding transport -capability using <seealso -marker="#add_transport">add_transport/2</seealso> and sending Diameter -requests and receiving Diameter answers with <seealso -marker="#call">call/4</seealso>. +locally implemented Diameter node and its capabilities with +&start_service;, adding transport capability using +&add_transport; and sending Diameter +requests and receiving Diameter answers with &call;. Incoming Diameter requests are communicated as callbacks to a -<seealso -marker="diameter_app">diameter_app(3)</seealso> callback modules as +&man_app; callback modules as specified in the service configuration.</p> <p> @@ -65,7 +73,7 @@ Beware the difference between <em>diameter</em> (not capitalised) and <em>Diameter</em> (capitalised). The former refers to the Erlang application named diameter whose main api is defined here, the latter to Diameter protocol in the sense of -RFC 3588.</p> +&the_rfc;.</p> <p> The diameter application must be started before calling most functions @@ -89,8 +97,8 @@ in this module.</p> <tag><c>UTF8String()</c></tag> <item> <p> -Types corresponding to RFC 3588 AVP Data Formats. -Defined in <seealso marker="diameter_dict#DATA_TYPES">diameter_dict(4)</seealso>.</p> +Types corresponding to &the_rfc; AVP Data Formats. +Defined in &dict_data_types;.</p> <marker id="application_alias"/> </item> @@ -100,7 +108,7 @@ Defined in <seealso marker="diameter_dict#DATA_TYPES">diameter_dict(4)</seealso> <p> A name identifying a Diameter application in service configuration. -Passed to <seealso marker="#call">call/4</seealso> when sending requests +Passed to &call; when sending requests defined by the application.</p> <marker id="application_module"/> @@ -110,23 +118,22 @@ defined by the application.</p> | [Mod | ExtraArgs] | #diameter_callback{}</c></tag> <item> -<code> +<pre> Mod = atom() ExtraArgs = list() -</code> +</pre> <p> -A module implementing the callback interface defined in <seealso -marker="diameter_app">diameter_app(3)</seealso>, along with any +A module implementing the callback interface defined in &man_app;, +along with any extra arguments to be appended to those documented for the interface. Note that extra arguments specific to an outgoing request can be -specified to <seealso marker="#call">call/4</seealso>, in which case +specified to &call;, in which case those are are appended to any module-specific extra arguments.</p> <p> Specifying a <c>#diameter_callback{}</c> record allows individual -functions to be configured in place of the usual <seealso -marker="diameter_app">diameter_app(3)</seealso> callbacks. +functions to be configured in place of the usual &man_app; callbacks. See that module for details.</p> <marker id="application_opt"/> @@ -141,7 +148,7 @@ Has one the following types.</p> <taglist> -<tag><c>{alias, <seealso marker="#application_alias">application_alias()</seealso>}</c></tag> +<tag><c>{alias, &application_alias;}</c></tag> <item> <p> An unique identifier for the application in the scope of the @@ -156,17 +163,15 @@ unspecified.</p> The name of an encode/decode module for the Diameter messages defined by the application. These modules are generated from a specification file whose format is -documented in <seealso -marker="diameter_dict">diameter_dict(4)</seealso>.</p> +documented in &man_dict;.</p> </item> -<tag><c>{module, <seealso marker="#application_module">application_module()</seealso>}</c></tag> +<tag><c>{module, &application_module;}</c></tag> <item> <p> The callback module with which messages of the Diameter application are handled. -See <seealso marker="diameter_app">diameter_app(3)</seealso> for -the required interface and semantics.</p> +See &man_app; for the required interface and semantics.</p> </item> <tag><c>{state, term()}</c></tag> @@ -174,7 +179,7 @@ the required interface and semantics.</p> <p> The initial callback state. The prevailing state is passed to some -<seealso marker="diameter_app">diameter_app(3)</seealso> +&man_app; callbacks, which can then return a new state. Defaults to the value of the <c>alias</c> option if unspecified.</p> </item> @@ -182,14 +187,13 @@ Defaults to the value of the <c>alias</c> option if unspecified.</p> <tag><c>{call_mutates_state, true|false}</c></tag> <item> <p> -Specifies whether or not the <seealso -marker="diameter_app#pick_peer">pick_peer/4</seealso> +Specifies whether or not the &app_pick_peer; application callback can modify the application state, Defaults to <c>false</c> if unspecified.</p> <note> <p> -<seealso marker="diameter_app#pick_peer">pick_peer</seealso> callbacks +&app_pick_peer; callbacks are serialized when these are allowed to modify state, which is a potential performance bottleneck. A simple Diameter client may suffer no ill effects from using mutable @@ -203,10 +207,8 @@ probably avoid it.</p> <p> Determines the manner in which incoming answer messages containing decode errors are handled. -If <c>callback</c> then errors result in a <seealso -marker="diameter_app#handle_answer">handle_answer/4</seealso> -callback in the same fashion as for <seealso -marker="diameter_app#handle_request">handle_request/3</seealso>, with +If <c>callback</c> then errors result in a &app_handle_answer; +callback in the same fashion as for &app_handle_request;, with errors communicated in the <c>errors</c> field of the <c>#diameter_packet{}</c> record passed to the callback. If <c>report</c> then an answer containing errors is discarded @@ -214,7 +216,7 @@ without a callback and a warning report is written to the log. If <c>discard</c> then an answer containing errors is silently discarded without a callback. In both the <c>report</c> and <c>discard</c> cases the return value -for the <seealso marker="#call">call/4</seealso> invocation in +for the &call; invocation in question is as if a callback had taken place and returned <c>{error, failure}</c>.</p> @@ -231,7 +233,7 @@ Defaults to <c>report</c> if unspecified.</p> <item> <p> -Options available to <seealso marker="#call">call/4</seealso> when +Options available to &call; when sending an outgoing Diameter request. Has one of the following types.</p> @@ -247,18 +249,18 @@ itself. Multiple options append to the argument list.</p> </item> -<tag><c>{filter, <seealso marker="#peer_filter">peer_filter()</seealso>}</c></tag> +<tag><c>{filter, &peer_filter;}</c></tag> <item> <p> A filter to apply to the list of available peers before passing them to -the <seealso marker="diameter_app#pick_peer">pick_peer/4</seealso> +the &app_pick_peer; callback for the application in question. Multiple options are equivalent a single <c>all</c> filter on the corresponding list of filters. Defaults to <c>none</c>.</p> </item> -<tag><c>{timeout, <seealso marker="diameter_dict#DATA_TYPES">Unsigned32()</seealso>}</c></tag> +<tag><c>{timeout, &dict_Unsigned32;}</c></tag> <item> <p> The number of milliseconds after which the request should @@ -269,21 +271,17 @@ Defaults to 5000.</p> <tag><c>detach</c></tag> <item> <p> -Causes <seealso marker="#call">call/4</seealso> to return <c>ok</c> as +Causes &call; to return <c>ok</c> as soon as the request in question has been encoded instead of waiting for and returning -the result from a subsequent -<seealso marker="diameter_app#handle_answer">handle_answer/4</seealso> -or <seealso -marker="diameter_app#handle_error">handle_error/4</seealso> -callback.</p> +the result from a subsequent &app_handle_answer; or +&app_handle_error; callback.</p> </item> </taglist> <p> -An invalid option will cause <seealso marker="#call">call/4</seealso> -to fail.</p> +An invalid option will cause &call; to fail.</p> <marker id="capability"/> </item> @@ -300,36 +298,35 @@ Has one of the following types.</p> <taglist> -<tag><c>{'Origin-Host', <seealso marker="diameter_dict#DATA_TYPES">DiameterIdentity()</seealso>}</c></tag> -<tag><c>{'Origin-Realm', <seealso marker="diameter_dict#DATA_TYPES">DiameterIdentity()</seealso>}</c></tag> -<tag><c>{'Host-IP-Address', [<seealso marker="diameter_dict#DATA_TYPES">Address()</seealso>]}</c></tag> +<tag><c>{'Origin-Host', &dict_DiameterIdentity;}</c></tag> +<tag><c>{'Origin-Realm', &dict_DiameterIdentity;}</c></tag> +<tag><c>{'Host-IP-Address', [&dict_Address;]}</c></tag> <item> <p> An address list is available to the start function of a -<seealso marker="diameter_transport">transport module</seealso>, which +&transport_module;, which can return a new list for use in the subsequent CER or CEA. Host-IP-Address need not be specified if the transport start function returns an address list.</p> </item> -<tag><c>{'Vendor-Id', <seealso marker="diameter_dict#DATA_TYPES">Unsigned32()</seealso>}</c></tag> -<tag><c>{'Product-Name', <seealso marker="diameter_dict#DATA_TYPES">UTF8String()</seealso>}</c></tag> -<tag><c>{'Origin-State-Id', <seealso marker="diameter_dict#DATA_TYPES">Unsigned32()</seealso>}</c></tag> +<tag><c>{'Vendor-Id', &dict_Unsigned32;}</c></tag> +<tag><c>{'Product-Name', &dict_UTF8String;}</c></tag> +<tag><c>{'Origin-State-Id', &dict_Unsigned32;}</c></tag> <item> <p> Origin-State-Id is optional but will be included in outgoing messages sent by diameter itself: CER/CEA, DWR/DWA and DPR/DPA. Setting a value of <c>0</c> (zero) is equivalent to not setting a -value as documented in RFC 3588. -The function <seealso -marker="#origin_state_id">origin_state_id/0</seealso> +value as documented in &the_rfc;. +The function &origin_state_id; can be used as to retrieve a value that is computed when the diameter application is started.</p> </item> -<tag><c>{'Supported-Vendor-Id', [<seealso marker="diameter_dict#DATA_TYPES">Unsigned32()</seealso>]}</c></tag> -<tag><c>{'Auth-Application-Id', [<seealso marker="diameter_dict#DATA_TYPES">Unsigned32()</seealso>]}</c></tag> -<tag><c>{'Inband-Security-Id', [<seealso marker="diameter_dict#DATA_TYPES">Unsigned32()</seealso>]}</c></tag> +<tag><c>{'Supported-Vendor-Id', [&dict_Unsigned32;]}</c></tag> +<tag><c>{'Auth-Application-Id', [&dict_Unsigned32;]}</c></tag> +<tag><c>{'Inband-Security-Id', [&dict_Unsigned32;]}</c></tag> <item> <p> Inband-Security-Id defaults to the empty list, which is equivalent to a @@ -338,9 +335,9 @@ If 1 (= TLS) is specified then TLS is selected if the CER/CEA received from the peer offers it.</p> </item> -<tag><c>{'Acct-Application-Id', [<seealso marker="diameter_dict#DATA_TYPES">Unsigned32()</seealso>]}</c></tag> -<tag><c>{'Vendor-Specific-Application-Id', [<seealso marker="diameter_dict#DATA_TYPES">Grouped()</seealso>]}</c></tag> -<tag><c>{'Firmware-Revision', <seealso marker="diameter_dict#DATA_TYPES">Unsigned32()</seealso>}</c></tag> +<tag><c>{'Acct-Application-Id', [&dict_Unsigned32;]}</c></tag> +<tag><c>{'Vendor-Specific-Application-Id', [&dict_Grouped;]}</c></tag> +<tag><c>{'Firmware-Revision', &dict_Unsigned32;}</c></tag> </taglist> @@ -357,7 +354,7 @@ It is an error to specify duplicate tuples.</p> An expression that can be evaluated as a function in the following sense.</p> -<code> +<pre> eval([{M,F,A} | T]) -> apply(M, F, T ++ A); eval([[F|A] | T]) -> @@ -366,19 +363,21 @@ eval([F|A]) -> apply(F, A); eval(F) -> eval([F]). -</code> +</pre> <p> -Applying an <c><seealso marker="#evaluable">evaluable()</seealso></c> +Applying an <c>&evaluable;</c> <c>E</c> to an argument list <c>A</c> is meant in the sense of <c>eval([E|A])</c>.</p> <warning> <p> -Beware of using fun expressions of the form <c>fun Name/Arity</c> (not -fun Mod:Name/Arity) in situations in which the fun is not short-lived +Beware of using fun expressions of the form <c>fun Name/Arity</c> in +situations in which the fun is not short-lived and code is to be upgraded at runtime since any processes retaining -such a fun will have a reference to old code.</p> +such a fun will have a reference to old code. +In particular, such a value is typically inappropriate in +configuration passed to &start_service; or &add_transport;.</p> </warning> <marker id="peer_filter"/> @@ -387,10 +386,8 @@ such a fun will have a reference to old code.</p> <tag><c>peer_filter() = term()</c></tag> <item> <p> -A filter passed to <seealso marker="#call">call/4</seealso> -in order to select candidate peers for a -<seealso marker="diameter_app#pick_peer">pick_peer/4</seealso> -callback. +A filter passed to &call; in order to select candidate peers for a +&app_pick_peer; callback. Has one of the following types.</p> <taglist> @@ -421,42 +418,42 @@ or any peer if the request does not contain a <c>Destination-Realm</c> AVP.</p> </item> -<tag><c>{host, any|<seealso marker="diameter_dict#DATA_TYPES">DiameterIdentity()</seealso>}</c></tag> +<tag><c>{host, any|&dict_DiameterIdentity;}</c></tag> <item> <p> Matches only those peers whose <c>Origin-Host</c> has the specified value, or all peers if the atom <c>any</c>.</p> </item> -<tag><c>{realm, any|<seealso marker="diameter_dict#DATA_TYPES">DiameterIdentity()</seealso></c></tag> +<tag><c>{realm, any|&dict_DiameterIdentity;</c></tag> <item> <p> Matches only those peers whose <c>Origin-Realm</c> has the specified value, or all peers if the atom <c>any</c>.</p> </item> -<tag><c>{eval, <seealso marker="#evaluable">evaluable()</seealso>}</c></tag> +<tag><c>{eval, &evaluable;}</c></tag> <item> <p> -Matches only those peers for which the specified <c><seealso -marker="#evaluable">evaluable()</seealso></c> returns +Matches only those peers for which the specified +<c>&evaluable;</c> returns <c>true</c> on the connection's <c>diameter_caps</c> record. Any other return value or exception is equivalent to <c>false</c>.</p> </item> -<tag><c>{neg, <seealso marker="#peer_filter">peer_filter()</seealso>}</c></tag> +<tag><c>{neg, &peer_filter;}</c></tag> <item> <p> Matches only those peers not matched by the specified filter.</p> </item> -<tag><c>{all, [<seealso marker="#peer_filter">peer_filter()</seealso>]}</c></tag> +<tag><c>{all, [&peer_filter;]}</c></tag> <item> <p> Matches only those peers matched by each filter in the specified list.</p> </item> -<tag><c>{any, [<seealso marker="#peer_filter">peer_filter()</seealso>]}</c></tag> +<tag><c>{any, [&peer_filter;]}</c></tag> <item> <p> Matches only those peers matched by at least one filter in the @@ -472,15 +469,12 @@ that matches no peer.</p> <note> <p> The <c>host</c> and <c>realm</c> filters examine the -outgoing request as passed to <seealso marker="#call">call/4</seealso>, -assuming that this is a record- or list-valued <c><seealso -marker="diameter_app#message">diameter_app:message()</seealso></c>, +outgoing request as passed to &call;, +assuming that this is a record- or list-valued <c>&codec_message;</c>, and that the message contains at most one of each AVP. -If this is not the case then the <c>{host|realm, <seealso -marker="diameter_dict#DATA_TYPES">DiameterIdentity()</seealso>}</c> +If this is not the case then the <c>{host|realm, &dict_DiameterIdentity;}</c> filters must be used to achieve the desired result. -An empty <c><seealso -marker="diameter_dict#DATA_TYPES">DiameterIdentity()</seealso></c> +An empty <c>&dict_DiameterIdentity;</c> (which should not be typical) matches all hosts/realms for the purposes of filtering.</p> </note> @@ -499,7 +493,7 @@ candidates list.</p> <item> <p> An event message sent to processes that have subscribed to these using -<seealso marker="#subscribe">subscribe/1</seealso>.</p> +&subscribe;.</p> <p> The <c>info</c> field of the event record can have one of the @@ -507,16 +501,27 @@ following types.</p> <taglist> +<tag><c>start</c></tag> +<tag><c>stop</c></tag> + +<item> +<p> +The service is being started or stopped. +No event precedes a <c>start</c> event. +No event follows a <c>stop</c> event and this event +implies the termination of all transport processes.</p> +</item> + <tag><c>{up, Ref, Peer, Config, Pkt}</c></tag> <tag><c>{up, Ref, Peer, Config}</c></tag> <tag><c>{down, Ref, Peer, Config}</c></tag> <item> -<code> -Ref = <seealso marker="#transport_ref">transport_ref()</seealso> -Peer = <seealso marker="diameter_app#peer">diameter_app:peer()</seealso> -Config = {connect|listen, [<seealso marker="#transport_opt">transport_opt()</seealso>]} +<pre> +Ref = &transport_ref; +Peer = &app_peer; +Config = {connect|listen, [&transport_opt;]} Pkt = #diameter_packet{} -</code> +</pre> <p> The RFC 3539 watchdog state machine has @@ -530,7 +535,7 @@ connectivity.</p> <p> Note that a single <c>up</c>/<c>down</c> event for a given peer -corresponds to one <seealso marker="diameter_app#peer_up">peer_up/peer_down</seealso> +corresponds to one &app_peer_up;/&app_peer_down; callback for each of the Diameter applications negotiated during capablilities exchange. That is, the event communicates connectivity with the @@ -540,25 +545,23 @@ respect to individual Diameter applications.</p> <tag><c>{reconnect, Ref, Opts}</c></tag> <item> -<code> -Ref = <seealso marker="#transport_ref">transport_ref()</seealso> -Opts = [<seealso marker="#transport_opt">transport_opt()</seealso>] -</code> +<pre> +Ref = &transport_ref; +Opts = [&transport_opt;] +</pre> <p> A connecting transport is attempting to establish/reestablish a -transport connection with a peer following <seealso -marker="#reconnect_timer">reconnect_timer</seealso> or -<seealso marker="#watchdog_timer">watchdog_timer</seealso> -expiry.</p> +transport connection with a peer following &reconnect_timer; or +&watchdog_timer; expiry.</p> </item> <tag><c>{closed, Ref, Reason, Config}</c></tag> <item> -<code> -Ref = <seealso marker="#transport_ref">transport_ref()</seealso> -Config = {connect|listen, [<seealso marker="#transport_opt">transport_opt()</seealso>]} -</code> +<pre> +Ref = &transport_ref; +Config = {connect|listen, [&transport_opt;]} +</pre> <p> Capabilities exchange has failed. @@ -568,13 +571,13 @@ Capabilities exchange has failed. <tag><c>{'CER', Result, Caps, Pkt}</c></tag> <item> -<code> +<pre> Result = ResultCode | {capabilities_cb, CB, ResultCode|discard} Caps = #diameter_caps{} Pkt = #diameter_packet{} ResultCode = integer() -CB = <seealso marker="#evaluable">evaluable()</seealso> -</code> +CB = &evaluable; +</pre> <p> An incoming CER has been answered with the indicated result code or @@ -588,11 +591,11 @@ contains the rejecting callback.</p> <tag><c>{'CER', Caps, {ResultCode, Pkt}}</c></tag> <item> -<code> +<pre> ResultCode = integer() Caps = #diameter_caps{} Pkt = #diameter_packet{} -</code> +</pre> <p> An incoming CER contained errors and has been answered with the @@ -601,14 +604,21 @@ indicated result code. <c>Pkt</c> contains the CER in question.</p> </item> +<tag><c>{'CER', timeout}</c></tag> +<item> +<p> +An expected CER was not received within &capx_timeout; of +connection establishment.</p> +</item> + <tag><c>{'CEA', Result, Caps, Pkt}</c></tag> <item> -<code> +<pre> Result = integer() | atom() | {capabilities_cb, CB, ResultCode|discard} Caps = #diameter_caps{} Pkt = #diameter_packet{} ResultCode = integer() -</code> +</pre> <p> An incoming CEA has been rejected for the indicated reason. @@ -623,10 +633,10 @@ contains the rejecting callback.</p> <tag><c>{'CEA', Caps, Pkt}</c></tag> <item> -<code> +<pre> Caps = #diameter_caps{} Pkt = #diameter_packet{} -</code> +</pre> <p> An incoming CEA contained errors and has been rejected. @@ -634,17 +644,24 @@ An incoming CEA contained errors and has been rejected. <c>Pkt</c> contains the CEA in question.</p> </item> +<tag><c>{'CEA', timeout}</c></tag> +<item> +<p> +An expected CEA was not received within &capx_timeout; +of connection establishment.</p> +</item> + </taglist> </item> <tag><c>{watchdog, Ref, PeerRef, {From, To}, Config}</c></tag> <item> -<code> -Ref = <seealso marker="#transport_ref">transport_ref()</seealso> -PeerRef = <seealso marker="diameter_app#peer_ref">diameter_app:peer_ref()</seealso> +<pre> +Ref = &transport_ref; +PeerRef = &app_peer_ref; From, To = initial | okay | suspect | down | reopen Config = {connect|listen, [transport_opt()]} -</code> +</pre> <p> An RFC 3539 watchdog state machine has changed state.</p> @@ -662,11 +679,10 @@ info fields of forms other than the above.</p> <tag><c>service_name() = term()</c></tag> <item> <p> -The name of a service as passed to <seealso -marker="#start_service">start_service/2</seealso> and with which the +The name of a service as passed to &start_service; and with which the service is identified. There can be at most one service with a given name on a given node. -Note that <seealso marker="erts:erlang#make_ref-0">erlang:make_ref/0</seealso> +Note that &make_ref; can be used to generate a service name that is somewhat unique.</p> <marker id="service_opt"/> @@ -675,91 +691,96 @@ can be used to generate a service name that is somewhat unique.</p> <tag><c>service_opt()</c></tag> <item> <p> -An option passed to <seealso -marker="#start_service">start_service/2</seealso>. -Can be any <c><seealso marker="#capability">capability()</seealso></c> as -well as the following.</p> +An option passed to &start_service;. +Can be any <c>&capability;</c> as well as the following.</p> <taglist> -<tag><c>{application, [<seealso marker="#application_opt">application_opt()</seealso>]}</c></tag> +<tag><c>{application, [&application_opt;]}</c></tag> <item> <p> Defines a Diameter application supported by the service.</p> <p> -A service must configure one <c>application</c> for each Diameter +A service must configure one tuple for each Diameter application it intends to support. -For an outgoing Diameter request, the relevant <c><seealso -marker="#application_alias">application_alias()</seealso></c> is -passed to <seealso marker="#call">call/4</seealso>, while for an +For an outgoing Diameter request, the relevant <c>&application_alias;</c> is +passed to &call;, while for an incoming request the application identifier in the message header determines the application, the identifier being specified in -the application's <seealso marker="diameter_dict">dictionary</seealso> -file.</p> +the application's &dictionary; file.</p> </item> -</taglist> - -<marker id="transport_opt"/> -</item> - -<tag><c>transport_opt()</c></tag> +<tag><c>{restrict_connections, false + | node + | nodes + | [node()] + | evaluable()}</c></tag> <item> <p> -An option passed to <seealso -marker="#add_transport">add_transport/2</seealso>. -Has one of the following types.</p> +Specifies the degree to which multiple transport connections to the +same peer are accepted by the service.</p> -<taglist> -<tag><c>{transport_module, atom()}</c></tag> -<item> <p> -A module implementing a transport process as defined in <seealso -marker="diameter_transport">diameter_transport(3)</seealso>. -Defaults to <c>diameter_tcp</c> if unspecified.</p> +If type <c>[node()]</c> then a connection is rejected if another already +exists on any of the specified nodes. +Values of type <c>false</c>, <c>node</c>, <c>nodes</c> or +&evaluable; are equivalent to +values <c>[]</c>, <c>[node()]</c>, <c>[node()|nodes()]</c> and the +evaluated value, respectively, evaluation of each expression taking +place whenever a new connection is to be established. +Note that <c>false</c> allows an unlimited number of connections to be +established with the same peer.</p> <p> -Multiple <c>transport_module</c> and <c>transport_config</c> -options are allowed. -The order of these is significant in this case (and only in this case), -a <c>transport_module</c> being paired with the first -<c>transport_config</c> following it in the options list, or the -default value for trailing modules. -Transport starts will be attempted with each of the -modules in order until one establishes a connection within the -corresponding timeout (see below) or all fail.</p> +Multiple connections are independent and governed +by their own peer and watchdog state machines.</p> + +<p> +Defaults to <c>nodes</c>.</p> </item> -<tag><c>{transport_config, term()}</c></tag> -<tag><c>{transport_config, term(), <seealso marker="diameter_dict#DATA_TYPES">Unsigned32()</seealso>}</c></tag> +<tag><c>{sequence, {H,N} | &evaluable;}</c></tag> <item> <p> -A term passed as the third argument to the <seealso -marker="diameter_transport#start">start/3</seealso> function of -the relevant <c>transport_module</c> in order to start a transport process. -Defaults to the empty list if unspecified.</p> - +Specifies a constant value <c>H</c> for the topmost <c>32-N</c> bits of +of 32-bit End-to-End and Hop-by-Hop identifiers generated +by the service, either explicity or as a return value of a function +to be evaluated at &start_service;. +In particular, an identifier <c>Id</c> is mapped to a new identifier +as follows.</p> +<pre> +(H bsl N) bor (Id band ((1 bsl N) - 1)) +</pre> <p> -The 3-tuple form additionally specifies an interval, in milliseconds, -after which a started transport process should be terminated if it has -not yet established a connection. -For example, the following options on a connecting transport -request a connection with one peer over SCTP or another -(typically the same) over TCP.</p> +Note that &the_rfc; requires that End-to-End identifiers remain unique +for a period of at least 4 minutes and that this and the call rate +places a lower bound on the appropriate values of <c>N</c>: +at a rate of <c>R</c> requests per second an <c>N</c>-bit counter +traverses all of its values in <c>(1 bsl N) div (R*60)</c> minutes so +the bound is <c>4*R*60 =< 1 bsl N</c>.</p> -<code> -{transport_module, diameter_sctp} -{transport_config, SctpOpts, 5000} -{transport_module, diameter_tcp} -{transport_config, TcpOpts} -</code> +<p><c>N</c> must lie in the range <c>0..32</c> and <c>H</c> must be a +non-negative integer less than <c>1 bsl (32-N)</c>.</p> <p> -To listen on both SCTP and TCP, define one transport for each.</p> +Defaults to <c>{0,32}</c>.</p> +</item> + +</taglist> + +<marker id="transport_opt"/> </item> -<tag><c>{applications, [<seealso marker="#application_alias">application_alias()</seealso>]}</c></tag> +<tag><c>transport_opt()</c></tag> +<item> +<p> +An option passed to &add_transport;. +Has one of the following types.</p> + +<taglist> +<marker id="applications"/> +<tag><c>{applications, [&application_alias;]}</c></tag> <item> <p> The list of Diameter applications to which the transport should be @@ -768,7 +789,8 @@ Defaults to all applications configured on the service in question. Applications not configured on the service in question are ignored.</p> </item> -<tag><c>{capabilities, [<seealso marker="#capability">capability()</seealso>]}</c></tag> +<marker id="capabilities"/> +<tag><c>{capabilities, [&capability;]}</c></tag> <item> <p> AVP's used to construct outgoing CER/CEA messages. @@ -778,98 +800,260 @@ question.</p> <p> Specifying a capability as a transport option may be particularly appropriate for Inband-Security-Id, in case -TLS is desired over TCP as implemented by -<seealso marker="diameter_tcp">diameter_tcp(3)</seealso>.</p> +TLS is desired over TCP as implemented by &man_tcp;.</p> </item> -<tag><c>{capabilities_cb, <seealso marker="#evaluable">evaluable()</seealso>}</c></tag> +<marker id="capabilities_cb"/> +<tag><c>{capabilities_cb, &evaluable;}</c></tag> <item> <p> A callback invoked upon reception of CER/CEA during capabilities exchange in order to ask whether or not the connection should be accepted. -Applied to the relevant <c><seealso -marker="#transport_ref">transport_ref()</seealso></c> and the -<c>#diameter_caps{}</c> record of the connection. -Returning <c>ok</c> accepts the connection. -Returning <c>integer()</c> causes an incoming -CER to be answered with the specified Result-Code. -Returning <c>discard</c> causes an incoming CER to -be discarded. -Returning <c>unknown</c> is equivalent to returning <c>3010</c>, -DIAMETER_UNKNOWN_PEER. -Returning anything but <c>ok</c> or a 2xxx series result -code causes the transport connection to be broken.</p> +Applied to the <c>&transport_ref;</c> and +<c>#diameter_caps{}</c> record of the connection.</p> + +<p> +The return value can have one of the following types.</p> + +<taglist> +<tag><c>ok</c></tag> +<item> +<p> +Accept the connection.</p> +</item> + +<tag><c>integer()</c></tag> +<item> +<p> +Causes an incoming CER to be answered with the specified Result-Code.</p> +</item> + +<tag><c>discard</c></tag> +<item> +<p> +Causes an incoming CER to be discarded without CEA being sent.</p> +</item> + +<tag><c>unknown</c></tag> +<item> +<p> +Equivalent to returning <c>3010</c>, DIAMETER_UNKNOWN_PEER.</p> +</item> +</taglist> <p> -Multiple <c>capabilities_cb</c> options can be specified, in which +Returning anything but <c>ok</c> or a 2xxx series result +code causes the transport connection to be broken. +Multiple &capabilities_cb; +options can be specified, in which case the corresponding callbacks are applied until either all return <c>ok</c> or one does not.</p> +</item> -<marker id="watchdog_timer"/> +<marker id="capx_timeout"/> +<tag><c>{capx_timeout, &dict_Unsigned32;}</c></tag> +<item> +<p> +The number of milliseconds after which a transport process having an +established transport connection will be terminated if the expected +capabilities exchange message (CER or CEA) is not received from the peer. +For a connecting transport, the timing reconnection attempts is +governed by &watchdog_timer; or +&reconnect_timer; expiry. +For a listening transport, the peer determines the timing.</p> + +<p> +Defaults to 10000.</p> </item> -<tag><c>{watchdog_timer, TwInit}</c></tag> +<marker id="disconnect_cb"/> +<tag><c>{disconnect_cb, &evaluable;}</c></tag> + <item> -<code> -TwInit = <seealso marker="diameter_dict#DATA_TYPES">Unsigned32()</seealso> - | {M,F,A} -</code> +<p> +A callback invoked prior to terminating the transport process of a +transport connection having watchdog state <c>OKAY</c>. +Applied to <c>Reason=transport|service|application</c> and the +<c>&transport_ref;</c> and +<c>&app_peer;</c> +in question, <c>Reason</c> indicating whether the the diameter +application is being stopped, the service in question is being stopped +at &stop_service; or +the transport in question is being removed at &remove_transport;, +respectively.</p> <p> -The RFC 3539 watchdog timer. -An integer value is interpreted as the RFC's TwInit in milliseconds, -a jitter of ± 2 seconds being added at each rearming of the -timer to compute the RFC's Tw. -An MFA is expected to return the RFC's Tw directly, with jitter -applied, allowing the jitter calculation to be performed by -the callback.</p> +The return value can have one of the following types.</p> +<taglist> +<tag><c>{dpr, [option()]}</c></tag> +<item> <p> -An integer value must be at least 6000 as required by RFC 3539. -Defaults to 30000 if unspecified.</p> +Causes Disconnect-Peer-Request to be sent to the peer, the transport +process being terminated following reception of +Disconnect-Peer-Answer or timeout. +An <c>option()</c> can be one of the following.</p> -<marker id="reconnect_timer"/> +<taglist> +<tag><c>{cause, 0|rebooting|1|busy|2|goaway}</c></tag> +<item> +<p> +The Disconnect-Cause to send, <c>REBOOTING</c>, <c>BUSY</c> and +<c>DO_NOT_WANT_TO_TALK_TO_YOU</c> respectively. +Defaults to <c>rebooting</c> for <c>Reason=service|application</c> and +<c>goaway</c> for <c>Reason=transport</c>.</p> +</item> + +<tag><c>{timeout, &dict_Unsigned32;}</c></tag> +<item> +<p> +The number of milliseconds after which the transport process is +terminated if DPA has not been received. +Defaults to 1000.</p> +</item> +</taglist> +</item> + +<tag><c>dpr</c></tag> +<item> +<p> +Equivalent to <c>{dpr, []}</c>.</p> +</item> + +<tag><c>close</c></tag> +<item> +<p> +Causes the transport process to be terminated without +Disconnect-Peer-Request being sent to the peer.</p> +</item> + +<tag><c>ignore</c></tag> +<item> +<p> +Equivalent to not having configured the callback.</p> +</item> +</taglist> + +<p> +Multiple &disconnect_cb; +options can be specified, in which +case the corresponding callbacks are applied until one of them returns +a value other than <c>ignore</c>. +All callbacks returning <c>ignore</c> is equivalent to not having +configured them.</p> + +<p> +Defaults to a single callback returning <c>dpr</c>.</p> </item> +<marker id="reconnect_timer"/> <tag><c>{reconnect_timer, Tc}</c></tag> <item> -<code> -Tc = <seealso marker="diameter_dict#DATA_TYPES">Unsigned32()</seealso> -</code> +<pre> +Tc = &dict_Unsigned32; +</pre> <p> -For a connecting transport, the RFC 3588 Tc timer, in milliseconds. +For a connecting transport, the &the_rfc; Tc timer, in milliseconds. Note that this timer determines the frequency with which a transport will attempt to establish a connection with its peer only <em>before</em> an initial connection is established: once there is an initial -connection it's watchdog_timer that determines the frequency of -reconnection attempts, as required by RFC 3539.</p> +connection it's &watchdog_timer; that determines the +frequency of reconnection attempts, as required by RFC 3539.</p> <p> For a listening transport, the timer specifies the time after which a previously connected peer will be forgotten: a connection after this time is regarded as an initial connection rather than a reestablishment, -causing the RFC 3539 state machine to pass to state OPEN rather than +causing the RFC 3539 state machine to pass to state OKAY rather than REOPEN. -Note that these semantics are not goverened by the RFC and -that a listening transport's <c>reconnect_timer</c> should be greater +Note that these semantics are not governed by the RFC and +that a listening transport's &reconnect_timer; should be greater than its peer's Tw plus jitter.</p> <p> Defaults to 30000 for a connecting transport and 60000 for a listening transport.</p> +</item> + +<marker id="transport_config"/> +<tag><c>{transport_config, term()}</c></tag> +<tag><c>{transport_config, term(), &dict_Unsigned32;}</c></tag> +<item> +<p> +A term passed as the third argument to the &transport_start; function of +the relevant &transport_module; in order to +start a transport process. +Defaults to the empty list if unspecified.</p> + +<p> +The 3-tuple form additionally specifies an interval, in milliseconds, +after which a started transport process should be terminated if it has +not yet established a connection. +For example, the following options on a connecting transport +request a connection with one peer over SCTP or another +(typically the same) over TCP.</p> + +<pre> +{transport_module, diameter_sctp} +{transport_config, SctpOpts, 5000} +{transport_module, diameter_tcp} +{transport_config, TcpOpts} +</pre> + +<p> +To listen on both SCTP and TCP, define one transport for each.</p> +</item> + +<marker id="transport_module"/> +<tag><c>{transport_module, atom()}</c></tag> +<item> +<p> +A module implementing a transport process as defined in &man_transport;. +Defaults to <c>diameter_tcp</c> if unspecified.</p> + +<p> +Multiple <c>transport_module</c> and &transport_config; +options are allowed. +The order of these is significant in this case (and only in this case), +a <c>transport_module</c> being paired with the first +&transport_config; +following it in the options list, or the default value for trailing +modules. +Transport starts will be attempted with each of the +modules in order until one establishes a connection within the +corresponding timeout (see below) or all fail.</p> +</item> + +<marker id="watchdog_timer"/> +<tag><c>{watchdog_timer, TwInit}</c></tag> +<item> +<pre> +TwInit = &dict_Unsigned32; + | {M,F,A} +</pre> + +<p> +The RFC 3539 watchdog timer. +An integer value is interpreted as the RFC's TwInit in milliseconds, +a jitter of ± 2 seconds being added at each rearming of the +timer to compute the RFC's Tw. +An MFA is expected to return the RFC's Tw directly, with jitter +applied, allowing the jitter calculation to be performed by +the callback.</p> +<p> +An integer value must be at least 6000 as required by RFC 3539. +Defaults to 30000 if unspecified.</p> </item> </taglist> <p> Unrecognized options are silently ignored but are returned unmodified -by <seealso -marker="#service_info">service_info/2</seealso> and can be referred to -in predicate functions passed to <seealso -marker="#remove_transport">remove_transport/2</seealso>.</p> +by &service_info; and can be referred to +in predicate functions passed to &remove_transport;.</p> <marker id="transport_ref"/> </item> @@ -877,8 +1061,7 @@ marker="#remove_transport">remove_transport/2</seealso>.</p> <tag><c>transport_ref() = reference()</c></tag> <item> <p> -An reference returned by <seealso -marker="#add_transport">add_transport/2</seealso> that +An reference returned by &add_transport; that identifies the configuration.</p> </item> @@ -886,7 +1069,6 @@ identifies the configuration.</p> </section> -<marker id="add_transport"/> <funcs> <!-- ===================================================================== --> @@ -896,9 +1078,9 @@ identifies the configuration.</p> -> {ok, Ref} | {error, Reason}</name> <fsummary>Add transport capability to a service.</fsummary> <type> -<v>SvcName = <seealso marker="#service_name">service_name()</seealso></v> -<v>Opt = <seealso marker="#transport_opt">transport_opt()</seealso></v> -<v>Ref = <seealso marker="#transport_ref">transport_ref()</seealso></v> +<v>SvcName = &service_name;</v> +<v>Opt = &transport_opt;</v> +<v>Ref = &transport_ref;</v> <v>Reason = term()</v> </type> <desc> @@ -917,8 +1099,7 @@ one peer, an listening transport potentially with many.</p> The diameter application takes responsibility for exchanging CER/CEA with the peer. Upon successful completion of capabilities exchange the service -calls each relevant application module's <seealso -marker="diameter_app#peer_up">peer_up/3</seealso> callback +calls each relevant application module's &app_peer_up; callback after which the caller can exchange Diameter messages with the peer over the transport. In addition to CER/CEA, the service takes responsibility for the @@ -937,7 +1118,6 @@ been configured: a service can be started after configuring its transports.</p> </note> -<marker id="call"/> </desc> </func> @@ -947,11 +1127,11 @@ its transports.</p> <name>call(SvcName, App, Request, [Opt]) -> Answer | ok | {error, Reason}</name> <fsummary>Send a Diameter request message.</fsummary> <type> -<v>SvcName = <seealso marker="#service_name">service_name()</seealso></v> -<v>App = <seealso marker="#application_alias">application_alias()</seealso></v> -<v>Request = <seealso marker="diameter_app#message">diameter_app:message()</seealso></v> +<v>SvcName = &service_name;</v> +<v>App = &application_alias;</v> +<v>Request = &codec_message;</v> <v>Answer = term()</v> -<v>Opt = <seealso marker="#call_opt">call_opt()</seealso></v> +<v>Opt = &call_opt;</v> </type> <desc> <p> @@ -960,37 +1140,29 @@ Send a Diameter request message.</p> <p> <c>App</c> specifies the Diameter application in which the request is defined and callbacks to the corresponding callback module -will follow as described below and in <seealso -marker="diameter_app">diameter_app(3)</seealso>. +will follow as described below and in &man_app;. Unless the <c>detach</c> option is specified, the call returns either when an answer message is received from the peer or an error occurs. In the answer case, the return value is as returned by a -<seealso -marker="diameter_app#handle_answer">handle_answer/4</seealso> -callback. +&app_handle_answer; callback. In the error case, whether or not the error is returned directly -by diameter or from a <seealso -marker="diameter_app#handle_error">handle_error/4</seealso> +by diameter or from a &app_handle_error; callback depends on whether or not the outgoing request is successfully encoded for transmission to the peer, the cases being documented below.</p> <p> If there are no suitable peers, or if -<seealso marker="diameter_app#pick_peer">pick_peer/4</seealso> +&app_pick_peer; rejects them by returning <c>false</c>, then <c>{error,no_connection}</c> is returned. -Otherwise <seealso marker="diameter_app#pick_peer">pick_peer/4</seealso> -is followed by a -<seealso -marker="diameter_app#prepare_request">prepare_request/3</seealso> -callback, the message is encoded and then sent.</p> +Otherwise &app_pick_peer; is followed by a +&app_prepare_request; callback, the message is encoded and then sent.</p> <p> There are several error cases which may prevent an answer from being received and passed to a -<seealso marker="diameter_app#handle_answer">handle_answer/4</seealso> -callback:</p> +&app_handle_answer; callback:</p> <list> @@ -1005,16 +1177,14 @@ is returned.</p> <p> If the request is successfully encoded and sent but the answer times out then a -<seealso marker="diameter_app#handle_error">handle_error/4</seealso> -callback takes place with <c>Reason = timeout</c>.</p> +&app_handle_error; callback takes place with <c>Reason = timeout</c>.</p> </item> <item> <p> If the request is successfully encoded and sent but the service in question is stopped before an answer is received then a -<seealso marker="diameter_app#handle_error">handle_error/4</seealso> -callback takes place with <c>Reason = cancel</c>.</p> +&app_handle_error; callback takes place with <c>Reason = cancel</c>.</p> </item> <item> @@ -1023,18 +1193,11 @@ If the transport connection with the peer goes down after the request has been sent but before an answer has been received then an attempt is made to resend the request to an alternate peer. If no such peer is available, or if the subsequent -<seealso marker="diameter_app#pick_peer">pick_peer/4</seealso> -callback rejects the candidates, then a -<seealso marker="diameter_app#handle_error">handle_error/4</seealso> -callback takes place with <c>Reason = failover</c>. -If a peer is selected then a -<seealso -marker="diameter_app#prepare_retransmit">prepare_retransmit/3</seealso> +&app_pick_peer; callback rejects the candidates, then a +&app_handle_error; callback takes place with <c>Reason = failover</c>. +If a peer is selected then a &app_prepare_retransmit; callback takes place, after which the semantics are the same as -following an initial -<seealso marker="diameter_app#prepare_request"> -prepare_request/3</seealso> -callback.</p> +following an initial &app_prepare_request; callback.</p> </item> <item> @@ -1061,14 +1224,13 @@ Note that <c>{error,encode}</c> is the only return value which guarantees that the request has <em>not</em> been sent over the transport connection.</p> -<marker id="origin_state_id"/> </desc> </func> <!-- ===================================================================== --> <func> -<name>origin_state_id() -> <seealso marker="diameter_dict#DATA_TYPES">Unsigned32()</seealso></name> +<name>origin_state_id() -> &dict_Unsigned32;</name> <fsummary>Returns a reasonable Origin-State-Id.</fsummary> <desc> <p> @@ -1077,26 +1239,26 @@ outgoing messages.</p> <p> The value returned is the number of seconds since 19680120T031408Z, -the first value that can be encoded as a Diameter <c><seealso marker="diameter_dict#DATA_TYPES">Time()</seealso></c>, +the first value that can be encoded as a Diameter <c>&dict_Time;</c>, at the time the diameter application was started.</p> -<marker id="remove_transport"/> </desc> </func> <!-- ===================================================================== --> <func> -<name>remove_transport(SvcName, Pred) -> ok</name> +<name>remove_transport(SvcName, Pred) -> ok | {error, Reason}</name> <fsummary>Remove previously added transports.</fsummary> <type> -<v>SvcName = <seealso marker="#service_name">service_name()</seealso></v> -<v>Pred = Fun | MFA | <seealso marker="#transport_ref">transport_ref()</seealso> | list() | true | false</v> +<v>SvcName = &service_name;</v> +<v>Pred = Fun | MFA | &transport_ref; | list() | true | false</v> <v></v> -<v>Fun = fun((<seealso marker="#transport_ref">transport_ref()</seealso>, connect|listen, list()) -> boolean())</v> -<v> | fun((<seealso marker="#transport_ref">transport_ref()</seealso>, list()) -> boolean())</v> +<v>Fun = fun((&transport_ref;, connect|listen, list()) -> boolean())</v> +<v> | fun((&transport_ref;, list()) -> boolean())</v> <v> | fun((list()) -> boolean())</v> <v>MFA = {atom(), atom(), list()}</v> +<v>Reason = term()</v> </type> <desc> <p> @@ -1106,12 +1268,11 @@ Remove previously added transports.</p> <c>Pred</c> determines which transports to remove. An arity-3-valued <c>Pred</c> removes all transports for which <c>Pred(Ref, Type, Opts)</c> returns <c>true</c>, where <c>Type</c> and -<c>Opts</c> are as passed to <seealso -marker="#add_transport">add_transport/2</seealso> and <c>Ref</c> is +<c>Opts</c> are as passed to &add_transport; and <c>Ref</c> is as returned by it. The remaining forms are equivalent to an arity-3 fun as follows.</p> -<code> +<pre> Pred = fun(transport_ref(), list()): fun(Ref, _, Opts) -> Pred(Ref, Opts) end Pred = fun(list()): fun(_, _, Opts) -> Pred(Opts) end Pred = transport_ref(): fun(Ref, _, _) -> Pred == Ref end @@ -1119,20 +1280,15 @@ Pred = list(): fun(_, _, Opts) -> [] == Pred -- Opts end Pred = true: fun(_, _, _) -> true end Pred = false: fun(_, _, _) -> false end Pred = {M,F,A}: fun(Ref, Type, Opts) -> apply(M, F, [Ref, Type, Opts | A]) end -</code> +</pre> <p> -Removing a transport causes all associated transport connections to -be broken. -A DPR message with -Disconnect-Cause <c>DO_NOT_WANT_TO_TALK_TO_YOU</c> will be sent -to each connected peer before disassociating the transport configuration -from the service and terminating the transport upon reception of -DPA or timeout.</p> - -<!-- TODO: document the timeout value, possibly make configurable. --> +Removing a transport causes the corresponding transport processes to +be terminated. +Whether or not a DPR message is sent to a peer is +controlled by value of &disconnect_cb; +configured on the transport.</p> -<marker id="service_info"/> </desc> </func> @@ -1142,13 +1298,19 @@ DPA or timeout.</p> <name>service_info(SvcName, Info) -> term()</name> <fsummary>Return information about a started service.</fsummary> <type> -<v>SvcName = <seealso marker="#service_name">service_name()</seealso></v> +<v>SvcName = &service_name;</v> <v>Info = Item | [Info]</v> <v>Item = atom()</v> </type> <desc> <p> Return information about a started service. +Requesting info for an unknown service causes <c>undefined</c> to be +returned. +Requesting a list of items causes a tagged list to be +returned.</p> + +<p> <c>Item</c> can be one of the following.</p> <taglist> @@ -1167,15 +1329,13 @@ Return information about a started service. <tag><c>'Firmware-Revision'</c></tag> <item> <p> -Return a capability value as configured with <seealso -marker="#start_service">start_service/2</seealso>.</p> +Return a capability value as configured with &start_service;.</p> </item> <tag><c>applications</c></tag> <item> <p> -Return the list of applications as configured with <seealso -marker="#start_service">start_service/2</seealso>. +Return the list of applications as configured with &start_service;. </p> </item> @@ -1183,23 +1343,21 @@ marker="#start_service">start_service/2</seealso>. <item> <p> Return a tagged list of all capabilities values as configured with -<seealso -marker="#start_service">start_service/2</seealso>.</p> +&start_service;.</p> </item> <tag><c>transport</c></tag> <item> <p> Return a list containing one entry for each of the service's transport -as configured with <seealso -marker="#add_transport">add_transport/2</seealso>. +as configured with &add_transport;. Each entry is a tagged list containing both configuration and information about established peer connections. An example return value with for a client service with Origin-Host "client.example.com" configured with a single transport connected to "server.example.com" might look as follows.</p> -<code> +<pre> [[{ref,#Ref<0.0.0.93>}, {type,connect}, {options,[{transport_module,diameter_tcp}, @@ -1244,23 +1402,18 @@ An example return value with for a client service with Origin-Host {{{0,258,0},recv,{'Result-Code',2001}},3}, {{{0,280,1},recv},2}, {{{0,280,0},send},2}]}]] -</code> +</pre> <p> -Here <c>ref</c> is a <c><seealso -marker="#transport_ref">transport_ref()</seealso></c> and <c>options</c> -the corresponding <c><seealso -marker="#transport_opt">transport_opt()</seealso></c> list passed to <seealso -marker="#add_transport">add_transport/2</seealso>. +Here <c>ref</c> is a <c>&transport_ref;</c> and <c>options</c> +the corresponding <c>&transport_opt;</c> list passed to +&add_transport;. The <c>watchdog</c> entry shows the state of a connection's RFC 3539 watchdog state machine. -The <c>peer</c> entry identifies the <c><seealso -marker="diameter_app#peer_ref">diameter_app:peer_ref()</seealso></c> for -which there will have been <seealso -marker="diameter_app#peer_up">peer_up</seealso> callbacks for the +The <c>peer</c> entry identifies the <c>&app_peer_ref;</c> for +which there will have been &app_peer_up; callbacks for the Diameter applications identified by the <c>apps</c> entry, -<c>common</c> being the <c><seealso -marker="#application_alias">application_alias()</seealso></c>. +<c>common</c> being the <c>&application_alias;</c>. The <c>caps</c> entry identifies the capabilities sent by the local node and received from the peer during capabilities exchange. The <c>port</c> entry displays socket-level information about the @@ -1279,12 +1432,12 @@ during the lifetime of the transport configuration.</p> <p> A listening transport presents its information slightly differently -since there may be multiple accepted connections for the same <c><seealso -marker="#transport_ref">transport_ref()</seealso></c>. +since there may be multiple accepted connections for the same +<c>&transport_ref;</c>. The <c>transport</c> info returned by a server with a single client connection might look as follows.</p> -<code> +<pre> [[{ref,#Ref<0.0.0.61>}, {type,listen}, {options,[{transport_module,diameter_tcp}, @@ -1331,7 +1484,7 @@ connection might look as follows.</p> {{{0,280,0},send},5}, {{{0,257,1},recv},1}, {{{0,257,0},send},1}]}]] -</code> +</pre> <p> The information presented here is as in the <c>connect</c> case except @@ -1350,7 +1503,7 @@ connections and for which Diameter-level statistics are accumulated only for the lifetime of the transport connection. A return value for the server above might look as follows.</p> -<code> +<pre> [[{ref,#Ref<0.0.0.61>}, {type,accept}, {options,[{transport_module,diameter_tcp}, @@ -1396,7 +1549,7 @@ A return value for the server above might look as follows.</p> {{{0,280,0},send},66}, {{{0,257,1},recv},1}, {{{0,257,0},send},1}]}]] -</code> +</pre> <p> Note that there may be multiple entries with the same <c>ref</c>, in @@ -1407,27 +1560,37 @@ contrast to <c>transport</c> info.</p> <item> <p> Return a <c>{{Counter, Ref}, non_neg_integer()}</c> list of counter values. -<c>Ref</c> can be either a <c><seealso -marker="#transport_ref">transport_ref()</seealso></c> -or a <c><seealso -marker="diameter_app#peer_ref">diameter_app:peer_ref()</seealso></c>. +<c>Ref</c> can be either a <c>&transport_ref;</c> +or a <c>&app_peer_ref;</c>. Entries for the latter are folded into corresponding entries for the former as peer connections go down. -Entries for both are removed at <seealso -marker="#remove_transport">remove_transport/2</seealso>. +Entries for both are removed at &remove_transport;. The Diameter-level statistics returned by <c>transport</c> and <c>connections</c> info are based upon these entries.</p> </item> -</taglist> - +<tag><c>&app_peer_ref;</c></tag> +<item> <p> -Requesting info for an unknown service causes <c>undefined</c> to be -returned. -Requesting a list of items causes a tagged list to be -returned.</p> +Return transport configuration associated with a single peer, as +passed to &add_transport;. +The returned list is empty if the peer is unknown. +Otherwise it contains the <c>ref</c>, <c>type</c> and <c>options</c> +tuples as in <c>transport</c> and <c>connections</c> info above. +For example:</p> + +<pre> +[{ref,#Ref<0.0.0.61>}, + {type,accept}, + {options,[{transport_module,diameter_tcp}, + {transport_config,[{reuseaddr,true}, + {ip,{127,0,0,1}}, + {port,3868}]}]}] +</pre> +</item> + +</taglist> -<marker id="services"/> </desc> </func> @@ -1437,34 +1600,32 @@ returned.</p> <name>services() -> [SvcName]</name> <fsummary>Return the list of started services.</fsummary> <type> -<v>SvcName = <seealso marker="#service_name">service_name()</seealso></v> +<v>SvcName = &service_name;</v> </type> <desc> <p> Return the list of started services.</p> -<marker id="session_id"/> </desc> </func> <!-- ===================================================================== --> <func> -<name>session_id(Ident) -> <seealso marker="diameter_dict#DATA_TYPES">OctetString()</seealso></name> +<name>session_id(Ident) -> &dict_OctetString;</name> <fsummary>Return a value for a Session-Id AVP.</fsummary> <type> -<v>Ident = <seealso marker="diameter_dict#DATA_TYPES">DiameterIdentity()</seealso></v> +<v>Ident = &dict_DiameterIdentity;</v> </type> <desc> <p> Return a value for a Session-Id AVP.</p> <p> -The value has the form required by section 8.8 of RFC 3588. +The value has the form required by section 8.8 of &the_rfc;. Ident should be the Origin-Host of the peer from which the message containing the returned value will be sent.</p> -<marker id="start"/> </desc> </func> @@ -1481,7 +1642,6 @@ The diameter application must be started before starting a service. In a production system this is typically accomplished by a boot file, not by calling <c>start/0</c> explicitly.</p> -<marker id="start_service"/> </desc> </func> @@ -1490,8 +1650,8 @@ file, not by calling <c>start/0</c> explicitly.</p> <name>start_service(SvcName, Options) -> ok | {error, Reason}</name> <fsummary>Start a Diameter service.</fsummary> <type> -<v>SvcName = <seealso marker="#service_name">service_name()</seealso></v> -<v>Options = [<seealso marker="#service_opt">service_opt()</seealso>]</v> +<v>SvcName = &service_name;</v> +<v>Options = [&service_opt;]</v> <v>Reason = term()</v> </type> <desc> @@ -1501,8 +1661,7 @@ Start a diameter service.</p> <p> A service defines a locally-implemented Diameter node, specifying the capabilities to be advertised during capabilities exchange. -Transports are added to a service using <seealso -marker="#add_transport">add_transport/2</seealso>. +Transports are added to a service using &add_transport;. </p> <note> @@ -1513,7 +1672,6 @@ capabilities and restrict its supported Diameter applications so necessarily the case.</p> </note> -<marker id="stop_service"/> </desc> </func> @@ -1528,7 +1686,6 @@ Stop the diameter application.</p> <p> </p> -<marker id="stop_service"/> </desc> </func> @@ -1537,7 +1694,7 @@ Stop the diameter application.</p> <name>stop_service(SvcName) -> ok | {error, Reason}</name> <fsummary>Stop a Diameter service.</fsummary> <type> -<v>SvcName = <seealso marker="#service_name">service_name()</seealso></v> +<v>SvcName = &service_name;</v> <v>Reason = term()</v> </type> <desc> @@ -1547,17 +1704,15 @@ Stop a diameter service.</p> <p> Stopping a service causes all associated transport connections to be broken. -A DPR message with be sent as in the case of <seealso -marker="#remove_transport">remove_transport/2</seealso>.</p> +A DPR message with be sent as in the case of &remove_transport;.</p> <note> <p> -Stopping a transport does not remove any associated transports: -<seealso marker="#remove_transport">remove_transport/2</seealso> must +Stopping a service does not remove any associated transports: +&remove_transport; must be called to remove transport configuration.</p> </note> -<marker id="subscribe"/> </desc> </func> @@ -1567,12 +1722,11 @@ be called to remove transport configuration.</p> <name>subscribe(SvcName) -> true</name> <fsummary>Subscribe to event messages.</fsummary> <type> -<v>SvcName = <seealso marker="#service_name">service_name()</seealso></v> +<v>SvcName = &service_name;</v> </type> <desc> <p> -Subscribe to <c><seealso -marker="#service_event">service_event()</seealso></c> messages from +Subscribe to <c>&service_event;</c> messages from a service.</p> <p> @@ -1581,7 +1735,6 @@ that does not yet exist. Doing so before adding transports is required to guarantee the reception of all related events.</p> -<marker id="unsubscribe"/> </desc> </func> @@ -1591,7 +1744,7 @@ reception of all related events.</p> <name>unsubscribe(SvcName) -> true</name> <fsummary>Unsubscribe to event messages.</fsummary> <type> -<v>SvcName = <seealso marker="#service_name">service_name()</seealso></v> +<v>SvcName = &service_name;</v> </type> <desc> <p> @@ -1608,9 +1761,7 @@ Unsubscribe to event messages from a service.</p> <title>SEE ALSO</title> <p> -<seealso marker="diameter_app">diameter_app(3)</seealso>, -<seealso marker="diameter_transport">diameter_transport(3)</seealso>, -<seealso marker="diameter_dict">diameter_dict(4)</seealso></p> +&man_app;, &man_transport;, &man_dict;</p> </section> diff --git a/lib/diameter/doc/src/diameter_app.xml b/lib/diameter/doc/src/diameter_app.xml index 4a4b212787..f4db625c71 100644 --- a/lib/diameter/doc/src/diameter_app.xml +++ b/lib/diameter/doc/src/diameter_app.xml @@ -1,5 +1,13 @@ <?xml version="1.0" encoding="latin1" ?> -<!DOCTYPE erlref SYSTEM "erlref.dtd"> +<!DOCTYPE erlref SYSTEM "erlref.dtd" [ + <!ENTITY message '<seealso marker="#message">message()</seealso>'> + <!ENTITY dict + '<seealso marker="diameter_dict#MESSAGE_RECORDS">diameter_dict(4)</seealso>'> + <!ENTITY % also SYSTEM "seealso.ent" > + <!ENTITY % here SYSTEM "seehere.ent" > + %also; + %here; +]> <erlref> <header> @@ -41,15 +49,13 @@ Callback module of a Diameter application.</modulesummary> <description> <p> -A diameter service as started by <seealso -marker="diameter#start_service">diameter:start_service/2</seealso> +A diameter service as started by &mod_start_service; configures one of more Diameter applications, each of whose configuration specifies a callback that handles messages specific to the application. The messages and AVPs of the application are defined in a dictionary file whose format is documented in -<seealso marker="diameter_dict">diameter_dict(4)</seealso> -while the callback module is documented here. +&man_dict; while the callback module is documented here. The callback module implements the Diameter application-specific functionality of a service.</p> @@ -60,26 +66,24 @@ The functions themselves are of three distinct flavours:</p> <list> <item> <p> -<seealso marker="#peer_up">peer_up/3</seealso> and -<seealso marker="#peer_down">peer_down/3</seealso> signal the +&peer_up; and &peer_down; signal the attainment or loss of connectivity with a Diameter peer.</p> </item> <item> <p> -<seealso marker="#pick_peer">pick_peer/4</seealso>, -<seealso marker="#prepare_request">prepare_request/3</seealso>, -<seealso marker="#prepare_retransmit">prepare_retransmit/3</seealso>, -<seealso marker="#handle_answer">handle_answer/4</seealso> -and <seealso marker="#handle_error">handle_error/4</seealso> are (or may -be) called as a consequence of a call to <seealso -marker="diameter#call">diameter:call/4</seealso> to send an outgoing +&pick_peer;, +&prepare_request;, +&prepare_retransmit;, +&handle_answer; +and &handle_error; are (or may be) called as a consequence of a call +to &mod_call; to send an outgoing Diameter request message.</p> </item> <item> <p> -<seealso marker="#handle_request">handle_request/3</seealso> +&handle_request; is called in response to an incoming Diameter request message.</p> </item> @@ -92,10 +96,9 @@ is called in response to an incoming Diameter request message.</p> The arities given for the the callback functions here assume no extra arguments. All functions will also be passed any extra arguments configured with -the callback module itself when calling <seealso -marker="diameter#start_service">diameter:start_service/2</seealso> +the callback module itself when calling &mod_start_service; and, for the call-specific callbacks, any extra arguments passed to -<seealso marker="diameter#call">diameter:call/4</seealso>.</p> +&mod_call;.</p> </note> <!-- ===================================================================== --> @@ -112,7 +115,8 @@ and, for the call-specific callbacks, any extra arguments passed to <item> <p> A record containing the identities of -the local Diameter node and the remote Diameter peer having an established transport +the local Diameter node and the remote Diameter peer having an +established transport connection, as well as the capabilities as determined by capabilities exchange. Each field of the record is a 2-tuple consisting of @@ -123,39 +127,17 @@ mandatory values as the bare value.</p> <marker id="message"/> -<tag><c>message() = record() | list()</c></tag> +<tag><c>message() = &codec_message;</c></tag> <item> <p> The representation of a Diameter message as passed to -<seealso marker="diameter#call">diameter:call/4</seealso>. -The record representation is as outlined in -<seealso -marker="diameter_dict#MESSAGE_RECORDS">diameter_dict(4)</seealso>: -a message as defined in a dictionary file is encoded as a record with -one field for each component AVP. -Equivalently, a message can also be encoded as a list whose head is -the atom-valued message name (the record name minus any -prefix specified in the relevant dictionary file) and whose tail is a -list of <c>{FieldName, FieldValue}</c> pairs.</p> - -<p> -A third representation allows a message to be specified as a list -whose head is a <c>#diameter_header{}</c> record and whose tail is a list -of <c>#diameter_avp{}</c> records. -This representation is used by diameter itself when relaying requests -as directed by the return value of a -<seealso marker="#handle_request">handle_request/3</seealso> -callback. -It differs from the other other two in that it bypasses the checks for -messages that do not agree with their definitions in the dictionary in -question (since relays agents must handle arbitrary request): messages -are sent exactly as specified.</p> +&mod_call; or returned from a &handle_request; callback.</p> </item> <marker id="packet"/> -<tag><c>packet() = #diameter_packet{}</c></tag> +<tag><c>packet() = &codec_packet;</c></tag> <item> <p> A container for incoming and outgoing Diameter messages that's passed @@ -168,13 +150,12 @@ Fields should not be set in return values except as documented.</p> <tag><c>peer_ref() = term()</c></tag> <item> <p> -A term identifying a transport connection with a Diameter peer. -Should be treated opaquely.</p> +A term identifying a transport connection with a Diameter peer.</p> </item> <marker id="peer"/> -<tag><c>peer() = {<seealso marker="#peer_ref">peer_ref()</seealso>, <seealso marker="#capabilities">capabilities()</seealso>}</c></tag> +<tag><c>peer() = {&peer_ref;, &capabilities;}</c></tag> <item> <p> A tuple representing a Diameter peer connection.</p> @@ -186,13 +167,9 @@ A tuple representing a Diameter peer connection.</p> <item> <p> The state maintained by the application callback functions -<seealso marker="#peer_up">peer_up/3</seealso>, -<seealso marker="#peer_down">peer_down/3</seealso> and (optionally) -<seealso marker="#pick_peer">pick_peer/4</seealso>. +&peer_up;, &peer_down; and (optionally) &pick_peer;. The initial state is configured in the call to -<seealso -marker="diameter#start_service">diameter:start_service/2</seealso> -that configures the application on a service. +&mod_start_service; that configures the application on a service. Callback functions returning a state are evaluated in a common service-specific process while those not returning state are evaluated in a request-specific @@ -213,18 +190,33 @@ process.</p> <name>Mod:peer_up(SvcName, Peer, State) -> NewState</name> <fsummary>Invoked when a transport connection has been established</fsummary> <type> -<v>SvcName = <seealso marker="diameter#service_name">diameter:service_name()</seealso></v> -<v>Peer = <seealso marker="#peer">peer()</seealso></v> -<v>State = NewState = <seealso marker="#state">state()</seealso></v> +<v>SvcName = &mod_service_name;</v> +<v>Peer = &peer;</v> +<v>State = NewState = &state;</v> </type> <desc> <p> -Invoked when a transport connection has been established -and a successful capabilities exchange has indicated that the peer -supports the Diameter application of the application on which -the callback module in question has been configured.</p> +Invoked to signal the availability of a peer connection. +In particular, capabilities exchange with the peer has indicated +support for the application in question, the RFC 3539 watchdog state +machine for the connection has reached state <c>OKAY</c> and Diameter +messages can be both sent and received.</p> + +<note> +<p> +A watchdog state machine can reach state <c>OKAY</c> from state +<c>SUSPECT</c> without a new capabilities exchange taking place. +A new transport connection (and capabilities exchange) results in a +new peer_ref().</p> +</note> + +<note> +<p> +There is no requirement that a callback return before incoming +requests are received: &handle_request; callbacks must be +handled independently of &peer_up; and &peer_down;.</p> +</note> -<marker id="peer_down"/> </desc> </func> @@ -232,88 +224,87 @@ the callback module in question has been configured.</p> <name>Mod:peer_down(SvcName, Peer, State) -> NewState</name> <fsummary>Invoked when a transport connection has been lost.</fsummary> <type> -<v>SvcName = <seealso marker="diameter#service_name">diameter:service_name()</seealso></v> -<v>Peer = <seealso marker="#peer">peer()</seealso></v> -<v>State = NewState = <seealso marker="#state">state()</seealso></v> +<v>SvcName = &mod_service_name;</v> +<v>Peer = &peer;</v> +<v>State = NewState = &state;</v> </type> <desc> <p> -Invoked when a transport connection has been lost following a previous -call to <seealso marker="#peer_up">peer_up/3</seealso>.</p> +Invoked to signal that a peer connection is no longer available +following a previous call to &peer_up;. +In particular, that the RFC 3539 watchdog state machine for the +connection has left state <c>OKAY</c> and the peer will no longer be a +candidate in &pick_peer; callbacks.</p> -<marker id="pick_peer"/> </desc> </func> <func> -<name>Mod:pick_peer(Candidates, Reserved, SvcName, State) - -> {ok, Peer} | {Peer, NewState} | false</name> +<name>Mod:pick_peer(Candidates, _Reserved, SvcName, State) + -> Selection | false</name> <fsummary>Select a target peer for an outgoing request.</fsummary> <type> -<v>Candidates = [<seealso marker="#peer">peer()</seealso>]</v> -<v>Peer = <seealso marker="#peer">peer()</seealso> | false</v> -<v>SvcName = <seealso marker="diameter#service_name">diameter:service_name()</seealso></v> -<v>State = NewState = <seealso marker="#state">state()</seealso></v> +<v>Candidates = [&peer;]</v> +<v>SvcName = &mod_service_name;</v> +<v>State = NewState = &state;</v> +<v>Selection = {ok, Peer} | {Peer, NewState}</v> +<v>Peer = &peer; | false</v> </type> <desc> <p> -Invoked as a consequence of a call to <seealso -marker="diameter#call">diameter:call/4</seealso> to select a destination -peer for an outgoing request, the return value indicating the selected -peer.</p> +Invoked as a consequence of a call to &mod_call; to select a destination +peer for an outgoing request. +The return value indicates the selected peer.</p> <p> -The candidate peers list will only include those -which are selected by any <c>filter</c> option specified in the call to -<seealso marker="diameter#call">diameter:call/4</seealso>, and only -those which have indicated support for the Diameter application in -question. +The candidate list contains only those peers that have advertised +support for the Diameter application in question during capabilities +exchange, that have not be excluded by a <c>filter</c> option in +the call to &mod_call; +and whose watchdog state machine is in the <c>OKAY</c> state. The order of the elements is unspecified except that any peers whose Origin-Host and Origin-Realm matches that of the outgoing request (in the sense of a <c>{filter, {all, [host, realm]}}</c> -option to <seealso marker="diameter#call">diameter:call/4</seealso>) +option to &mod_call;) will be placed at the head of the list.</p> <p> -The return values <c>false</c> and <c>{false, State}</c> are -equivalent when callback state is mutable, as are -<c>{ok, Peer}</c> and <c>{Peer, State}</c>. -Returning a peer as <c>false</c> causes <c>{error, no_connection}</c> -to be returned from <seealso marker="diameter#call">diameter:call/4</seealso>. -Returning a <seealso marker="#peer">peer()</seealso> from an initial -pick_peer/4 callback will result in a -<seealso marker="#prepare_request">prepare_request/3</seealso> callback -followed by either <seealso -marker="#handle_answer">handle_answer/4</seealso> -or <seealso marker="#handle_error">handle_error/4</seealso> depending +A callback that returns a peer() will be followed by a +&prepare_request; +callback and, if the latter indicates that the request should be sent, +by either &handle_answer; +or &handle_error; depending on whether or not an answer message is received from the peer. -If transport with the peer is lost before this then a new <seealso -marker="#pick_peer">pick_peer/4</seealso> callback takes place to -select an alternate peer.</p> - -<p> -Note that there is no guarantee that a <seealso -marker="#pick_peer">pick_peer/4</seealso> callback to select -an alternate peer will be followed by any additional callbacks, only -that the initial <seealso -marker="#pick_peer">pick_peer/4</seealso> will be, since a +If the transport becomes unavailable after &prepare_request; then a +new &pick_peer; callback may take place to +failover to an alternate peer, after which &prepare_retransmit; takes the +place of &prepare_request; in resending the +request. +There is no guarantee that a &pick_peer; callback to select +an alternate peer will be followed by any additional callbacks since a retransmission to an alternate peer is abandoned if an answer is received from a previously selected peer.</p> +<p> +Returning <c>false</c> or <c>{false, NewState}</c> causes <c>{error, +no_connection}</c> to be returned from &mod_call;.</p> + +<p> +The return values <c>false</c> and <c>{false, State}</c> (that is, +<c>NewState = State</c>) are equivalent, as are <c>{ok, Peer}</c> and +<c>{Peer, State}</c>.</p> + <note> <p> -<c>{Peer, NewState}</c> and its equivalents can only be returned if -the Diameter application in question was -configured with the <seealso -marker="diameter#application_opt">diameter:application_opt()</seealso> -<c>{call_mutates_state, true}</c>. +The return value <c>{Peer, NewState}</c> is only allowed if +the Diameter application in question was configured with the +&mod_application_opt; <c>{call_mutates_state, true}</c>. Otherwise, the <c>State</c> argument is always the intial value as configured on the application, not any subsequent -value returned by a <seealso marker="#peer_up">peer_up/3</seealso> -or <seealso marker="#peer_down">peer_down/3</seealso> callback.</p> +value returned by a &peer_up; +or &peer_down; callback.</p> </note> -<marker id="prepare_request"/> </desc> </func> @@ -322,74 +313,81 @@ or <seealso marker="#peer_down">peer_down/3</seealso> callback.</p> <name>Mod:prepare_request(Packet, SvcName, Peer) -> Action</name> <fsummary>Return a request for encoding and transport.</fsummary> <type> -<v>Packet = <seealso marker="#packet">packet()</seealso></v> -<v>SvcName = <seealso marker="diameter#service_name">diameter:service_name()</seealso></v> -<v>Peer = <seealso marker="#peer">peer()</seealso></v> -<v>Action = {send, <seealso marker="#packet">packet()</seealso> | <seealso marker="#message">message()</seealso>} | {discard, Reason} | discard</v> +<v>Packet = &packet;</v> +<v>SvcName = &mod_service_name;</v> +<v>Peer = &peer;</v> +<v>Action = Send | Discard | {eval_packet, Action, PostF}</v> +<v>Send = {send, &packet; | &message;}</v> +<v>Discard = {discard, Reason} | discard</v> +<v>PostF = &mod_evaluable;}</v> </type> <desc> <p> Invoked to return a request for encoding and transport. -Allows the sender to access the selected peer's capabilities -in order to set (for example) <c>Destination-Host</c> and/or -<c>Destination-Realm</c> in the outgoing request, although the -callback need not be limited to this usage. +Allows the sender to use the selected peer's capabilities +to modify the outgoing request. Many implementations may simply want to return <c>{send, Packet}</c></p> <p> -A returned <seealso marker="#packet">packet()</seealso> should set the request to be encoded in its +A returned &packet; should set the +request to be encoded in its <c>msg</c> field and can set the <c>transport_data</c> field in order -to pass information to the transport module. -Extra arguments passed to <seealso -marker="diameter#call">diameter:call/4</seealso> can be used to -communicate transport data to the callback. -A returned <seealso marker="#packet">packet()</seealso> can also set the <c>header</c> field to a -<c>#diameter_header{}</c> record in order to specify values that should -be preserved in the outgoing request, although this should typically -not be necessary and allows the callback to set header values -inappropriately. +to pass information to the transport process. +Extra arguments passed to &mod_call; can be used to +communicate transport (or any other) data to the callback.</p> + +<p> +A returned &packet; can set +the <c>header</c> field to a +<c>#diameter_header{}</c> to specify values that should +be preserved in the outgoing request, values otherwise being those in +the header record contained in <c>Packet</c>. A returned <c>length</c>, <c>cmd_code</c> or <c>application_id</c> is ignored.</p> <p> +A returned <c>PostF</c> will be evaluated on any encoded +<c>#diameter_packet{}</c> prior to transmission, the <c>bin</c> field +containing the encoded binary. +The return value is ignored.</p> + +<p> Returning <c>{discard, Reason}</c> causes the request to be aborted -and the <seealso -marker="diameter#call">diameter:call/4</seealso> for which the +and the &mod_call; for which the callback has taken place to return <c>{error, Reason}</c>. Returning <c>discard</c> is equivalent to returning <c>{discard, discarded}</c>.</p> -<marker id="prepare_retransmit"/> </desc> </func> <func> -<name>Mod:prepare_retransmit(Packet, SvcName, Peer) -> Result</name> +<name>Mod:prepare_retransmit(Packet, SvcName, Peer) -> Action</name> <fsummary>Return a request for encoding and retransmission.</fsummary> <type> -<v>Packet = <seealso marker="#packet">packet()</seealso></v> -<v>SvcName = <seealso marker="diameter#service_name">diameter:service_name()</seealso></v> -<v>Peer = <seealso marker="#peer">peer()</seealso></v> -<v>Result = {send, <seealso marker="#packet">packet()</seealso> | <seealso marker="#message">message()</seealso>} | {discard, Reason} | discard</v> +<v>Packet = &packet;</v> +<v>SvcName = &mod_service_name;</v> +<v>Peer = &peer;</v> +<v>Action = Send | Discard | {eval_packet, Action, PostF}</v> +<v>Send = {send, &packet; | &message;}</v> +<v>Discard = {discard, Reason} | discard</v> +<v>PostF = &mod_evaluable;}</v> </type> <desc> <p> Invoked to return a request for encoding and retransmission. -Has the same role as <seealso -marker="#prepare_request">prepare_request/3</seealso> in the case that +Has the same role as &prepare_request; in the case that a peer connection is lost an an alternate peer selected but the -argument <seealso marker="#packet">packet()</seealso> is as returned by the initial -<c>prepare_request/3</c>.</p> +argument &packet; is as returned +by the initial &prepare_request;.</p> <p> Returning <c>{discard, Reason}</c> causes the request to be aborted -and a <seealso -marker="#handle_error">handle_error/4</seealso> callback to +and a &handle_error; callback to take place with <c>Reason</c> as initial argument. Returning <c>discard</c> is equivalent to returning <c>{discard, discarded}</c>.</p> -<marker id="handle_answer"/> </desc> </func> @@ -397,51 +395,43 @@ discarded}</c>.</p> <name>Mod:handle_answer(Packet, Request, SvcName, Peer) -> Result</name> <fsummary>Receive an answer message from a peer.</fsummary> <type> -<v>Packet = <seealso marker="#packet">packet()</seealso></v> -<v>Request = <seealso marker="#message">message()</seealso></v> -<v>SvcName = <seealso marker="diameter#service_name">diameter:service_name()</seealso></v> -<v>Peer = <seealso marker="#peer">peer()</seealso></v> +<v>Packet = &packet;</v> +<v>Request = &message;</v> +<v>SvcName = &mod_service_name;</v> +<v>Peer = &peer;</v> <v>Result = term()</v> </type> <desc> <p> Invoked when an answer message is received from a peer. -The return value is returned from the call to <seealso -marker="diameter#call">diameter:call/4</seealso> for which the -callback takes place unless the <c>detach</c> option was -specified.</p> +The return value is returned from &mod_call; unless the +<c>detach</c> option was specified.</p> <p> -The decoded answer record is in the <c>msg</c> field of the argument -<seealso marker="#packet">packet()</seealso>, -the undecoded binary in the <c>packet</c> field. +The decoded answer record and undecoded binary are in the <c>msg</c> +and <c>bin</c> fields of the argument +&packet; respectively. <c>Request</c> is the outgoing request message as was returned from -<seealso marker="#prepare_request">prepare_request/3</seealso> or -<seealso marker="#prepare_retransmit">prepare_retransmit/3</seealso> -before the request was passed to the transport.</p> +&prepare_request; or &prepare_retransmit;.</p> <p> -For any given call to <seealso -marker="diameter#call">diameter:call/4</seealso> there is at most one -call to the handle_answer callback of the application in question: any +For any given call to &mod_call; there is at most one +&handle_answer; callback: any duplicate answer (due to retransmission or otherwise) is discarded. -Similarly, only one of <c>handle_answer/4</c> or <c>handle_error/4</c> is -called for any given request.</p> +Similarly, only one of &handle_answer; or +&handle_error; is called.</p> <p> By default, an incoming answer message that cannot be successfully -decoded causes the request process in question to fail, causing the -relevant call to <seealso -marker="diameter#call">diameter:call/4</seealso> -to return <c>{error, failure} (unless the <c>detach</c> option was -specified)</c>. -In particular, there is no <c>handle_error/4</c> callback in this +decoded causes the request process to fail, causing +&mod_call; +to return <c>{error, failure}</c> unless the <c>detach</c> option was +specified. +In particular, there is no &handle_error; callback in this case. -Application configuration may change this behaviour as described for -<seealso -marker="diameter#start_service">diameter:start_service/2</seealso>.</p> +The &mod_application_opt; +<c>answer_errors</c> can be set to change this behaviour.</p> -<marker id="handle_error"/> </desc> </func> @@ -450,30 +440,26 @@ marker="diameter#start_service">diameter:start_service/2</seealso>.</p> <fsummary>Return an error from a outgoing request.</fsummary> <type> <v>Reason = timeout | failover | term()</v> -<v>Request = <seealso marker="#message">message()</seealso></v> -<v>SvcName = <seealso marker="diameter#service_name">diameter:service_name()</seealso></v> -<v>Peer = <seealso marker="#peer">peer()</seealso></v> +<v>Request = &message;</v> +<v>SvcName = &mod_service_name;</v> +<v>Peer = &peer;</v> <v>Result = term()</v> </type> <desc> <p> -Invoked when an error occurs before an answer message is received from -a peer in response to an outgoing request. -The return value is returned from the call to <seealso -marker="diameter#call">diameter:call/4</seealso> for which the -callback takes place (unless the <c>detach</c> option was -specified).</p> +Invoked when an error occurs before an answer message is received +in response to an outgoing request. +The return value is returned from &mod_call; unless the +<c>detach</c> option was specified.</p> <p> Reason <c>timeout</c> indicates that an answer message has not been -received within the required time. +received within the time specified with the corresponding &mod_call_opt;. Reason <c>failover</c> indicates that the transport connection to the peer to which the request has -been sent has been lost but that not alternate node was available, -possibly because a <seealso marker="#pick_peer">pick_peer/4</seealso> -callback returned false.</p> +been sent has become unavailable and that not alternate peer was +not selected.</p> -<marker id="handle_request"/> </desc> </func> @@ -481,54 +467,54 @@ callback returned false.</p> <name>Mod:handle_request(Packet, SvcName, Peer) -> Action</name> <fsummary>Receive an incoming request.</fsummary> <type> -<v>Packet = <seealso marker="#packet">packet()</seealso></v> +<v>Packet = &packet;</v> <v>SvcName = term()</v> -<v>Peer = <seealso marker="#peer">peer()</seealso></v> -<v>Action = Reply | {relay, [Opt]} | discard | {eval, Action, PostF}</v> -<v>Reply = {reply, <seealso marker="#message">message()</seealso>} +<v>Peer = &peer;</v> +<v>Action = Reply + | {relay, [Opt]} + | discard + | {eval|eval_packet, Action, PostF}</v> +<v>Reply = {reply, &packet; | &message;} | {protocol_error, 3000..3999}</v> -<v>Opt = <seealso marker="diameter#call_opt">diameter:call_opt()</seealso></v> -<v>PostF = <seealso marker="diameter#evaluable">diameter:evaluable()</seealso></v> +<v>Opt = &mod_call_opt;</v> +<v>PostF = &mod_evaluable;</v> </type> <desc> <p> Invoked when a request message is received from a peer. The application in which the callback takes place (that is, the -callback module as configured with <seealso -marker="diameter#start_service">diameter:start_service/2</seealso>) +callback module as configured with &mod_start_service;) is determined by the Application Identifier in the header of the incoming request message, the selected module being the one -whose corresponding <seealso -marker="diameter_dict#MESSAGE_RECORDS">dictionary</seealso> declares +whose corresponding dictionary declares itself as defining either the application in question or the Relay application.</p> <p> -The argument <seealso marker="#packet">packet()</seealso> has the following signature.</p> +The argument &packet; has the following signature.</p> -<code> +<pre> #diameter_packet{header = #diameter_header{}, avps = [#diameter_avp{}], msg = record() | undefined, - errors = [<seealso marker="diameter_dict#DATA_TYPES">Unsigned32()</seealso> | {<seealso marker="diameter_dict#DATA_TYPES">Unsigned32()</seealso>, #diameter_avp{}}], + errors = [&dict_Unsigned32; | {&dict_Unsigned32;, #diameter_avp{}}], bin = binary(), transport_data = term()} -</code> +</pre> <p> -The <c>msg</c> field will be <c>undefined</c> only in case the request has +The <c>msg</c> field will be <c>undefined</c> in case the request has been received in the relay application. Otherwise it contains the record representing the request as outlined -in <seealso -marker="diameter_dict#MESSAGE_RECORDS">diameter_dict(4)</seealso>.</p> +in &dict;.</p> <p> The <c>errors</c> field specifies any Result-Code's identifying errors that were encountered in decoding the request. In this case diameter will set both Result-Code and Failed-AVP AVP's in a returned -answer <seealso marker="#message">message()</seealso> before sending it to the peer: -the returned <seealso marker="#message">message()</seealso> need only set any other required AVP's. +answer &message; before sending it to the peer: +the returned &message; need only set any other required AVP's. Note that the errors detected by diameter are all of the 5xxx series (Permanent Failures). The <c>errors</c> list is empty if the request has been received in @@ -538,19 +524,24 @@ the relay application.</p> The <c>transport_data</c> field contains an arbitrary term passed into diameter from the transport module in question, or the atom <c>undefined</c> if the transport specified no data. -The term is preserved in the <seealso marker="#packet">packet()</seealso> containing any answer message -sent back to the transport process unless another value is explicitly -specified.</p> +The term is preserved if a &message; is returned but must be set +explicitly in a returned &packet;.</p> <p> The semantics of each of the possible return values are as follows.</p> <taglist> -<tag><c>{reply, <seealso marker="#message">message()</seealso>}</c></tag> +<tag><c>{reply, &packet; | &message;}</c></tag> <item> <p> -Send the specified answer message to the peer.</p> +Send the specified answer message to the peer. +In the case of a &packet;, the +message to be sent must be set in the +<c>msg</c> field and the <c>header</c> field can be set to a +<c>#diameter_header{}</c> to specify values that should be +preserved in the outgoing answer, appropriate values otherwise +being set by diameter.</p> </item> <tag><c>{protocol_error, 3000..3999}</c></tag> @@ -559,15 +550,15 @@ Send the specified answer message to the peer.</p> Send an answer message to the peer containing the specified protocol error. Equivalent to</p> -<code> +<pre> {reply, ['answer-message' | Avps] -</code> +</pre> <p> where <c>Avps</c> sets the Origin-Host, Origin-Realm, the specified Result-Code and (if the request sent one) Session-Id AVP's.</p> <p> -Note that RFC 3588 mandates that only answers with a 3xxx series +Note that &the_rfc; mandates that only answers with a 3xxx series Result-Code (protocol errors) may set the E bit. Returning a non-3xxx value in a <c>protocol_error</c> tuple will cause the request process in question to fail.</p> @@ -580,37 +571,47 @@ Relay a request to another peer in the role of a Diameter relay agent. If a routing loop is detected then the request is answered with 3005 (DIAMETER_LOOP_DETECTED). Otherwise a Route-Record AVP (containing the sending peer's Origin-Host) is -added to the request and <seealso marker="#pick_peer">pick_peer/4</seealso> -and subsequent callbacks take place just as if <seealso -marker="diameter#call">diameter:call/4</seealso> had been called +added to the request and &pick_peer; +and subsequent callbacks take place just as if &mod_call; had been called explicitly. The End-to-End Identifier of the incoming request is preserved in the header of the relayed request.</p> <p> The returned <c>Opts</c> should not specify <c>detach</c>. -A subsequent <seealso marker="#handle_answer">handle_answer/4</seealso> +A subsequent &handle_answer; callback for the relayed request must return its first argument, the <c>#diameter_packet{}</c> record containing the answer message. Note that the <c>extra</c> option can be specified to supply arguments that can distinguish the relay case from others if so desired. Any other return value (for example, from a -<seealso marker="#handle_error">handle_error/4</seealso> callback) +&handle_error; callback) causes the request to be answered with 3002 (DIAMETER_UNABLE_TO_DELIVER).</p> </item> <tag><c>discard</c></tag> <item> <p> -Discard the request.</p> +Discard the request. +No answer message is sent to the peer.</p> </item> <tag><c>{eval, Action, PostF}</c></tag> <item> <p> Handle the request as if <c>Action</c> has been returned and then -evaluate <c>PostF</c> in the request process.</p> +evaluate <c>PostF</c> in the request process. +The return value is ignored.</p> +</item> + +<tag><c>{eval_packet, Action, PostF}</c></tag> +<item> +<p> +Like <c>eval</c> but evaluate <c>PostF</c> on any encoded +<c>#diameter_packet{}</c> prior to transmission, the <c>bin</c> field +containing the encoded binary. +The return value is ignored.</p> </item> </taglist> diff --git a/lib/diameter/doc/src/diameter_codec.xml b/lib/diameter/doc/src/diameter_codec.xml new file mode 100644 index 0000000000..4a77d5435b --- /dev/null +++ b/lib/diameter/doc/src/diameter_codec.xml @@ -0,0 +1,389 @@ +<?xml version="1.0" encoding="latin1" ?> +<!DOCTYPE erlref SYSTEM "erlref.dtd" [ + <!ENTITY records + '<seealso marker="diameter_dict#MESSAGE_RECORDS">diameter_dict(4)</seealso>'> + <!ENTITY types + '<seealso marker="diameter_dict#DATA_TYPES">diameter_dict(4)</seealso>'> + <!ENTITY % also SYSTEM "seealso.ent" > + <!ENTITY % here SYSTEM "seehere.ent" > + %also; + %here; +]> + +<erlref> +<header> +<copyright> +<year>2012</year> +<holder>Ericsson AB. All Rights Reserved.</holder> +</copyright> +<legalnotice> +The contents of this file are subject to the Erlang Public License, +Version 1.1, (the "License"); you may not use this file except in +compliance with the License. You should have received a copy of the +Erlang Public License along with this software. If not, it can be +retrieved online at http://www.erlang.org/. + +Software distributed under the License is distributed on an "AS IS" +basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +the License for the specific language governing rights and limitations +under the License. + +</legalnotice> + +<title>diameter_codec(3)</title> +<prepared>Anders Svensson</prepared> +<responsible></responsible> +<docno></docno> +<approved></approved> +<checked></checked> +<date></date> +<rev></rev> +<file>diameter_codec.xml</file> +</header> + +<module>diameter_codec</module> +<modulesummary>Decode and encode of Diameter messages.</modulesummary> + +<description> + +<p> +Incoming Diameter messages are decoded from binary() before being +communicated to &man_app; callbacks. +Similarly, outgoing Diameter messages are encoded into binary() before +being passed to the appropriate &man_transport; module for +transmission. +The functions in this module implement this encode/decode.</p> + +<note> +<p> +Calls to this module are made by diameter itself as a consequence of +configuration passed to &mod_start_service;. +The encode/decode functions may also be useful for other purposes (eg. +test) but the diameter user does not need to call them explicitly when +sending and receiving messages using &mod_call; and the callback +interface documented in &man_app;.</p> +</note> + +<p> +The &header; and &packet; records below +are defined in diameter.hrl, which can be included as follows.</p> + +<pre> +-include_lib("diameter/include/diameter.hrl"). +</pre> + +<p> +Application-specific records are definied in the hrl +files resulting from dictionary file compilation.</p> + +</description> + +<!-- ===================================================================== --> + +<section> +<title>DATA TYPES</title> + +<p></p> + +<taglist> + +<marker id="integers"/> + +<tag><c>uint8() = 0..255</c></tag> +<tag><c>uint24() = 0..16777215</c></tag> +<tag><c>uint32() = 0..4294967295</c></tag> +<item> +<p> +8-bit, 24-bit and 32-bit integers occurring in Diameter and AVP +headers.</p> +</item> + +<marker id="avp"/> + +<tag><c>avp() = #diameter_avp{}</c></tag> +<item> +<p> +The application-neutral representation of an AVP. +Primarily intended for use by relay applications that need to handle +arbitrary Diameter applications. +A service implementing a specific Diameter application +(for which it configures a dictionary) can manipulate values of type +&message; instead.</p> + +<p> +Fields have the following types.</p> + +<taglist> + +<tag><c>code = uint32()</c></tag> +<tag><c>is_mandatory = boolean()</c></tag> +<tag><c>need_encryption = boolean()</c></tag> +<tag><c>vendor_id = uint32() | undefined</c></tag> +<item> +<p> +Values in the AVP header, corresponding to AVP Code, the M flag, P +flags and Vendor-ID respectivelty. +A Vendor-ID other than <c>undefined</c> implies a set V flag.</p> +</item> + +<tag><c>data = iolist()</c></tag> +<item> +<p> +The data bytes of the AVP.</p> +</item> + +<tag><c>name = atom()</c></tag> +<item> +<p> +The name of the AVP as defined in the dictionary file in question, or +<c>undefined</c> if the AVP is unknown to the dictionary file in +question.</p> +</item> + +<tag><c>value = term()</c></tag> +<item> +<p> +The decoded value of an AVP. +Will be <c>undefined</c> on decode if the data bytes could +not be decoded or the AVP is unknown. +The type of a decoded value is as document in &types;.</p> +</item> + +<tag><c>type = atom()</c></tag> +<item> +<p> +The type of the AVP as specified in the dictionary file in question +(or one it inherits). +Possible types are <c>undefined</c> and the Diameter types: +<c>OctetString</c>, <c>Integer32</c>, <c>Integer64</c>, +<c>Unsigned32</c>, <c>Unsigned64</c>, <c>Float32</c>, <c>Float64</c>, +<c>Grouped</c>, <c>Enumerated</c>, <c>Address</c>, <c>Time</c>, +<c>UTF8String</c>, <c>DiameterIdentity</c>, <c>DiameterURI</c>, +<c>IPFilterRule</c> and <c>QoSFilterRule</c>.</p> +</item> + +</taglist> + +</item> + +<marker id="dictionary"/> + +<tag><c>dictionary() = module()</c></tag> +<item> + +<p> +The name of a generated dictionary module as generated by &man_compile; +or &make_codec;. +The interface provided by a dictionary module is an +implementation detail that may change.</p> +</item> + +<marker id="header"/> + +<tag><c>header() = #diameter_header{}</c></tag> +<item> +<p> +The record representation of the Diameter header. +Values in a &packet; returned by &decode; are as extracted from the +incoming message. +Values set in an &packet; passed to &encode; are preserved in the +encoded binary(), with the exception of <c>length</c>, <c>cmd_code</c> +and <c>application_id</c>, all of which are determined by the +&dictionary; in question.</p> + +<note> +<p> +It is not necessary to set header fields explicitly in outgoing +messages as diameter itself will set appropriate values. +Setting inappropriate values can be useful for test purposes.</p> +</note> + +<p> +Fields have the following types.</p> + +<taglist> + +<tag><c>version = uint8()</c></tag> +<tag><c>length = uint24()</c></tag> +<tag><c>cmd_code = uint24()</c></tag> +<tag><c>application_id = uint32()</c></tag> +<tag><c>hop_by_hop_id = uint32()</c></tag> +<tag><c>end_to_end_id = uint32()</c></tag> +<item> +<p> +Values of the Version, Message Length, Command-Code, Application-ID, +Hop-by-Hop Identifier and End-to-End Identifier fields of the Diameter +header.</p> +</item> + +<tag><c>is_request = boolean()</c></tag> +<tag><c>is_proxiable = boolean()</c></tag> +<tag><c>is_error = boolean()</c></tag> +<tag><c>is_retransmitted = boolean()</c></tag> +<item> +<p> +Values correspoding to the R(equest), P(roxiable), E(rror) +and T(Potentially re-transmitted message) flags of the Diameter +header.</p> +</item> + +</taglist> + +</item> + +<marker id="message"/> + +<tag><c>message() = record() | list()</c></tag> +<item> +<p> +The representation of a Diameter message as passed to +&mod_call; or returned from a &app_handle_request; callback. +The record representation is as outlined in &records;: +a message as defined in a dictionary file is encoded as a record with +one field for each component AVP. +Equivalently, a message can also be encoded as a list whose head is +the atom-valued message name (as specified in the relevant dictionary +file) and whose tail is a list of <c>{AvpName, AvpValue}</c> pairs.</p> + +<p> +Another list-valued representation allows a message to be specified +as a list whose head is a &header; and whose tail is an &avp; list. +This representation is used by diameter itself when relaying requests +as directed by the return value of a &app_handle_request; callback. +It differs from the other other two in that it bypasses the checks for +messages that do not agree with their definitions in the dictionary in +question: messages are sent exactly as specified.</p> + +</item> + +<marker id="packet"/> + +<tag><c>packet() = #diameter_packet{}</c></tag> +<item> +<p> +A container for incoming and outgoing Diameter messages. +Fields have the following types.</p> + +<taglist> + +<tag><c>header = &header; | undefined</c></tag> +<item> +<p> +The Diameter header of the message. +Can be (and typically should be) <c>undefined</c> for an outgoing +message in a non-relay application, in which case diameter provides +appropriate values.</p> +</item> + +<tag><c>avps = [&avp;] | undefined</c></tag> +<item> +<p> +The AVPs of the message. +Ignored for an outgoing message if the <c>msg</c> field is set to a +value other than <c>undefined</c>.</p> +</item> + +<tag><c>msg = &message; | undefined</c></tag> +<item> +<p> +The incoming/outgoing message. +For an incoming message, a record if the message can be +decoded in a non-relay application, <c>undefined</c> otherwise. +For an outgoing message, setting a <c>[&header; | &avp;]</c> list is +equivalent to setting the <c>header</c> and <c>avps</c> fields to the +corresponding values.</p> + +<warning> +<p> +A record-valued <c>msg</c> field does <b>not</b> imply an absence of +decode errors. +The <c>errors</c> field should also be examined.</p> +</warning> + +</item> + +<tag><c>bin = binary()</c></tag> +<item> +<p> +The incoming message prior to encode or the outgoing message after +encode.</p> +</item> + +<tag><c>errors = [5000..5999 | {5000..5999, avp()}]</c></tag> +<item> +<p> +Errors detected at decode of an incoming message, as identified by +a corresponding 5xxx series Result-Code (Permanent Failures). +For an incoming request, these should be used to formulate an +appropriate answer as documented for the &app_handle_request; +callback in &man_app;. +For an incoming answer, the &mod_application_opt; +<c>answer_errors</c> determines the behaviour.</p> +</item> + +<tag><c>transport_data = term()</c></tag> +<item> +<p> +An arbitrary term of meaning only to the transport process in +question, as documented in &man_transport;.</p> +</item> + +</taglist> + +</item> + +</taglist> + +</section> + +<!-- ===================================================================== --> + +<funcs> + +<func> +<name>decode(Mod, Bin) -> Pkt</name> +<fsummary>Decode a Diameter message.</fsummary> +<type> +<v>Mod = &dictionary;</v> +<v>Bin = binary()</v> +<v>Pkt = &packet;</v> +</type> +<desc> + +<p> +Decode a Diameter message.</p> + +</desc> +</func> + +<func> +<name>encode(Mod, Msg) -> Pkt</name> +<fsummary>Encode a Diameter message.</fsummary> +<type> +<v>Mod = &dictionary;</v> +<v>Msg = &message; | &packet;</v> +<v>Pkt = &packet;</v> +</type> +<desc> + +<p> +Encode a Diameter message. +</p> + +</desc> +</func> + +</funcs> + +<!-- ===================================================================== --> +<!-- ===================================================================== --> + +<section> +<title>SEE ALSO</title> + +<p> +&man_compile;, &man_app;, &man_dict;, &man_make;</p> + +</section> + +</erlref> diff --git a/lib/diameter/doc/src/diameter_compile.xml b/lib/diameter/doc/src/diameter_compile.xml index 7a6ca48798..0bd7ad1789 100644 --- a/lib/diameter/doc/src/diameter_compile.xml +++ b/lib/diameter/doc/src/diameter_compile.xml @@ -1,5 +1,12 @@ <?xml version="1.0" encoding="iso-8859-1" ?> -<!DOCTYPE comref SYSTEM "comref.dtd"> +<!DOCTYPE comref SYSTEM "comref.dtd" [ + <!ENTITY dictionary + '<seealso marker="diameter_dict">dictionary file</seealso>'> + <!ENTITY % also SYSTEM "seealso.ent" > + <!ENTITY % here SYSTEM "seehere.ent" > + %also; + %here; +]> <comref> <header> @@ -31,12 +38,14 @@ supplied. <description> <p> -The diameterc utility is used to compile diameter -<seealso marker="diameter_dict">dictionary files</seealso> -into Erlang source. -The resulting source implements the interface diameter requires +The diameterc utility is used to compile a diameter +&dictionary; into Erlang source. +The resulting source implements the interface diameter required to encode and decode the dictionary's messages and AVP's.</p> +<p> +The module &man_make; provides an alternate compilation interface.</p> + </description> <section> @@ -47,53 +56,52 @@ to encode and decode the dictionary's messages and AVP's.</p> <tag><![CDATA[diameterc [<options>] <file>]]></tag> <item> <p> -Compiles a single dictionary file. Valid options are as follows.</p> - -<!-- Leave -h/d/v undocumented, except for the usage message from the - utility itself. --> - -<taglist> -<tag><![CDATA[-o <dir>]]></tag> -<item> -<p> -Specifies the directory into which the generated source should be written. -Defaults to the current working directory.</p> -</item> +Compile a single dictionary file to Erlang source. +Valid options are as follows.</p> <tag><![CDATA[-i <dir>]]></tag> <item> <p> -Specifies a directory to add to the code path. +Prepend the specified directory to the code path. Use to point at beam files compiled from inherited dictionaries, -<c>@inherits</c> in a dictionary file creating a beam dependency, not -an erl/hrl dependency.</p> +<c>&dict_inherits;</c> in a dictionary file creating a beam +dependency, not an erl/hrl dependency.</p> <p> Multiple <c>-i</c> options can be specified.</p> </item> +<taglist> +<tag><![CDATA[-o <dir>]]></tag> +<item> +<p> +Write generated source to the specified directory. +Defaults to the current working directory.</p> +</item> + <tag><![CDATA[-E]]></tag> <tag><![CDATA[-H]]></tag> <item> <p> -Supresses erl and hrl generation, respectively.</p> +Supress erl and hrl generation, respectively.</p> </item> <tag><![CDATA[--name <name>]]></tag> <tag><![CDATA[--prefix <prefix>]]></tag> <item> <p> -Set <c>@name</c> and <c>@prefix</c> in the dictionary, -respectively. +Set <c>&dict_name;</c> or <c>&dict_prefix;</c> to the specified +string. Overrides any setting in the file itself.</p> </item> <tag><![CDATA[--inherits <dict>]]></tag> <item> <p> -Append an <c>@inherits</c> to the dictionary before compiling. -Specifying <c>'-'</c> as the dictionary has the effect of clearing any -previous inherits, causing them to be ignored.</p> +Append &dict_inherits; of the specified module. +Specifying <c>"-"</c> has the effect of discarding clearing any +previous inherits, both in the dictionary file and on the options +list.</p> <p> Multiple <c>--inherits</c> options can be specified.</p> @@ -122,7 +130,7 @@ Returns 0 on success, non-zero on failure.</p> <title>SEE ALSO</title> <p> -<seealso marker="diameter_dict">diameter_dict(4)</seealso></p> +&man_make;, &man_dict;</p> </section> diff --git a/lib/diameter/doc/src/diameter_dict.xml b/lib/diameter/doc/src/diameter_dict.xml index 98adebf145..8b0687a22e 100644 --- a/lib/diameter/doc/src/diameter_dict.xml +++ b/lib/diameter/doc/src/diameter_dict.xml @@ -1,5 +1,16 @@ <?xml version="1.0" encoding="latin1" ?> -<!DOCTYPE erlref SYSTEM "fileref.dtd"> +<!DOCTYPE erlref SYSTEM "fileref.dtd" [ + <!ENTITY format + '<seealso marker="#FILE_FORMAT">FILE FORMAT</seealso>'> + <!ENTITY records + '<seealso marker="#MESSAGE_RECORDS">MESSAGE RECORDS</seealso>'> + <!ENTITY types + '<seealso marker="#DATA_TYPES">DATA TYPES</seealso>'> + <!ENTITY % also SYSTEM "seealso.ent" > + <!ENTITY % here SYSTEM "seehere.ent" > + %also; + %here; +]> <fileref> <header> @@ -40,36 +51,33 @@ under the License. <description> <p> -A diameter service as configured with <seealso -marker="diameter#start_service">diameter:start_service/2</seealso> +A diameter service, as configured with &mod_start_service;, specifies one or more supported Diameter applications. Each Diameter application specifies a dictionary module that knows how to encode and decode its messages and AVPs. The dictionary module is in turn generated from a file that defines these messages and AVPs. -The format of such a file is defined in -<seealso marker="#FILE_FORMAT">FILE FORMAT</seealso> below. +The format of such a file is defined in &format; below. Users add support for their specific applications by creating dictionary files, compiling them to Erlang modules using -<seealso marker="diameterc">diameterc</seealso> and configuring the +either &man_compile; or &man_make; and configuring the resulting dictionaries modules on a service.</p> <p> -The codec generation also results in a hrl file that defines records -for the messages and grouped AVPs defined for the application, these -records being what a user of the diameter application sends and receives. -(Modulo other available formats as discussed in <seealso -marker="diameter_app">diameter_app(3)</seealso>.) +Dictionary module generation also results in a hrl file that defines +records for the messages and Grouped AVPs defined by the +dictionary, these records being what a user of the diameter +application sends and receives, modulo other possible formats as +discussed in &man_app;. These records and the underlying Erlang data types corresponding to -Diameter data formats are discussed in <seealso -marker="#MESSAGE_RECORDS">MESSAGE RECORDS</seealso> and <seealso -marker="#DATA_TYPES">DATA TYPES</seealso> respectively. -The generated hrl also contains defines for the possible values of +Diameter data formats are discussed in &records; and &types; +respectively. +The generated hrl also contains macro definitions for the possible values of AVPs of type Enumerated.</p> <p> The diameter application includes three dictionary modules -corresponding to applications defined in section 2.4 of RFC 3588: +corresponding to applications defined in section 2.4 of &the_rfc;: <c>diameter_gen_base_rfc3588</c> for the Diameter Common Messages application with application identifier 0, <c>diameter_gen_accounting</c> for the Diameter Base Accounting @@ -108,6 +116,8 @@ The order in which sections are specified is unimportant.</p> <taglist> +<marker id="id"/> + <tag><c>@id Number</c></tag> <item> <p> @@ -125,12 +135,14 @@ is used to identify the relevant dictionary module.</p> <p> Example:</p> -<code> +<pre> @id 16777231 -</code> +</pre> </item> +<marker id="name"/> + <tag><c>@name Mod</c></tag> <item> <p> @@ -146,12 +158,14 @@ with existing modules in the system.</p> <p> Example:</p> -<code> +<pre> @name etsi_e2 -</code> +</pre> </item> +<marker id="prefix"/> + <tag><c>@prefix Name</c></tag> <item> <p> @@ -169,12 +183,14 @@ different Diameter applications.</p> <p> Example:</p> -<code> +<pre> @prefix etsi_e2 -</code> +</pre> </item> +<marker id="vendor"/> + <tag><c>@vendor Number Name</c></tag> <item> <p> @@ -189,12 +205,14 @@ The section has empty content.</p> <p> Example:</p> -<code> +<pre> @vendor 13019 ETSI -</code> +</pre> </item> +<marker id="avp_vendor_id"/> + <tag><c>@avp_vendor_id Number</c></tag> <item> <p> @@ -205,16 +223,18 @@ The section content consists of AVP names.</p> <p> Example:</p> -<code> +<pre> @avp_vendor_id 2937 WWW-Auth Domain-Index Region-Set -</code> +</pre> </item> +<marker id="inherits"/> + <tag><c>@inherits Mod</c></tag> <item> <p> @@ -238,18 +258,20 @@ is equivalent to using <c>@avp_vendor_id</c> with a copy of the dictionary's definitions but the former makes for easier reuse.</p> <p> -All dictionaries should typically inherit RFC3588 AVPs from +All dictionaries should typically inherit &the_rfc; AVPs from <c>diameter_gen_base_rfc3588</c>.</p> <p> Example:</p> -<code> +<pre> @inherits diameter_gen_base_rfc3588 -</code> +</pre> </item> +<marker id="avp_types"/> + <tag><c>@avp_types</c></tag> <item> <p> @@ -260,7 +282,7 @@ The section consists of definitions of the form</p> <p> where Code is the integer AVP code, Type identifies an AVP Data Format -as defined in <seealso marker="#DATA_TYPES">DATA TYPES</seealso> below, +as defined in section &types; below, and Flags is a string of V, M and P characters indicating the flags to be set on an outgoing AVP or a single <c>'-'</c> (minus) character if none are to be set.</p> @@ -268,22 +290,22 @@ none are to be set.</p> <p> Example:</p> -<code> +<pre> @avp_types Location-Information 350 Grouped MV Requested-Information 353 Enumerated V -</code> +</pre> <warning> <p> -The P flag has been deprecated by the Diameter Maintenance -and Extensions Working Group of the IETF and should be omitted -to conform to the current draft standard.</p> +The P flag has been deprecated by &the_rfc;.</p> </warning> </item> +<marker id="custom_types"/> + <tag><c>@custom_types Mod</c></tag> <item> <p> @@ -298,13 +320,15 @@ encode/decode.</p> <p> Example:</p> -<code> +<pre> @custom_types rfc4005_avps Framed-IP-Address -</code> +</pre> </item> +<marker id="codecs"/> + <tag><c>@codecs Mod</c></tag> <item> <p> @@ -315,22 +339,24 @@ Like <c>@custom_types</c> but requires the specified module to export <p> Example:</p> -<code> +<pre> @codecs rfc4005_avps Framed-IP-Address -</code> +</pre> </item> +<marker id="messages"/> + <tag><c>@messages</c></tag> <item> <p> Defines the messages of the application. The section content consists of definitions of the form specified in -section 3.2 of RFC 3588, "Command Code ABNF specification".</p> +section 3.2 of &the_rfc;, "Command Code Format Specification".</p> <!-- RFC 4740 RTR/RTA --> -<code> +<pre> @messages RTR ::= < Diameter Header: 287, REQ, PXY > @@ -363,35 +389,39 @@ RTA ::= < Diameter Header: 287, PXY > * [ Proxy-Info ] * [ Route-Record ] * [ AVP ] -</code> +</pre> </item> +<marker id="grouped"/> + <tag><c>@grouped</c></tag> <item> <p> Defines the contents of the AVPs of the application having type Grouped. The section content consists of definitions of the form specified in -section 4.4 of RFC 3588, "Grouped AVP Values".</p> +section 4.4 of &the_rfc;, "Grouped AVP Values".</p> <p> Example:</p> -<code> +<pre> @grouped SIP-Deregistration-Reason ::= < AVP Header: 383 > { SIP-Reason-Code } [ SIP-Reason-Info ] * [ AVP ] -</code> +</pre> <p> Specifying a Vendor-Id in the definition of a grouped AVP is equivalent to specifying it with <c>@avp_vendor_id</c>.</p> </item> +<marker id="enum"/> + <tag><c>@enum Name</c></tag> <item> <p> @@ -408,16 +438,18 @@ otherwise defined in another dictionary.</p> <p> Example:</p> -<code> +<pre> @enum SIP-Reason-Code PERMANENT_TERMINATION 0 NEW_SIP_SERVER_ASSIGNED 1 SIP_SERVER_CHANGE 2 REMOVE_SIP_SERVER 3 -</code> +</pre> </item> +<marker id="end"/> + <tag><c>@end</c></tag> <item> <p> @@ -444,28 +476,28 @@ The hrl generated from a dictionary specification defines records for the messages and grouped AVPs defined in <c>@messages</c> and <c>@grouped</c> sections. For each message or grouped AVP definition, a record is defined whose -name is the message or AVP name prefixed with any dictionary prefix -defined with <c>@prefix</c> and whose fields are the names of the AVPs +name is the message or AVP name, prefixed with any dictionary prefix +defined with <c>@prefix</c>, and whose fields are the names of the AVPs contained in the message or grouped AVP in the order specified in the definition in question. For example, the grouped AVP</p> -<code> +<pre> SIP-Deregistration-Reason ::= < AVP Header: 383 > { SIP-Reason-Code } [ SIP-Reason-Info ] * [ AVP ] -</code> +</pre> <p> will result in the following record definition given an empty prefix.</p> -<code> +<pre> -record('SIP-Deregistration-Reason' {'SIP-Reason-Code', 'SIP-Reason-Info', 'AVP'}). -</code> +</pre> <p> The values encoded in the fields of generated records depends on the @@ -473,7 +505,7 @@ type and number of times the AVP can occur. In particular, an AVP which is specified as occurring exactly once is encoded as a value of the AVP's type while an AVP with any other specification is encoded as a list of values of the AVP's type. -The AVP's type is as specified in the AVP definition, the RFC 3588 +The AVP's type is as specified in the AVP definition, the &the_rfc; types being described below.</p> <marker id="DATA_TYPES"/> @@ -486,13 +518,11 @@ types being described below.</p> <p> The data formats defined in sections 4.2 ("Basic AVP Data -Formats") and 4.3 ("Derived AVP Data Formats") of RFC 3588 are encoded +Formats") and 4.3 ("Derived AVP Data Formats") of &the_rfc; are encoded as values of the types defined here. -Values are passed to <seealso -marker="diameter#call">diameter:call/4</seealso> +Values are passed to &mod_call; in a request record when sending a request, returned in a resulting -answer record and passed to a <seealso -marker="diameter_app#handle_request">handle_request</seealso> +answer record and passed to a &app_handle_request; callback upon reception of an incoming request.</p> <p> @@ -507,7 +537,7 @@ callback upon reception of an incoming request.</p> <marker id="Float64"/> <marker id="Grouped"/> -<code> +<pre> OctetString() = [0..255] Integer32() = -2147483647..2147483647 Integer64() = -9223372036854775807..9223372036854775807 @@ -516,7 +546,7 @@ Unsigned64() = 0..18446744073709551615 Float32() = '-infinity' | float() | infinity Float64() = '-infinity' | float() | infinity Grouped() = record() -</code> +</pre> <p> On encode, an OctetString() can be specified as an iolist(), @@ -530,10 +560,10 @@ section.</p> <em>Derived AVP Data Formats</em></p> <marker id="Address"/> -<code> +<pre> Address() = OctetString() | tuple() -</code> +</pre> <p> On encode, an OctetString() IPv4 address is parsed in the usual @@ -545,7 +575,7 @@ An IPv6 tuple() has length 8 and contains values of type 0..65535. The tuple representation is used on decode.</p> <marker id="Time"/> -<code> +<pre> Time() = {date(), time()} where @@ -559,19 +589,19 @@ where Hour = 0..23 Minute = 0..59 Second = 0..59 -</code> +</pre> <p> Additionally, values that can be encoded are -limited by way of their encoding as four octets as required by RFC -3588 with the required extension from RFC 2030. +limited by way of their encoding as four octets as required by +&the_rfc; with the required extension from RFC 2030. In particular, only values between <c>{{1968,1,20},{3,14,8}}</c> and <c>{{2104,2,26},{9,42,23}}</c> (both inclusive) can be encoded.</p> <marker id="UTF8String"/> -<code> +<pre> UTF8String() = [integer()] -</code> +</pre> <p> List elements are the UTF-8 encodings of the individual characters @@ -579,15 +609,15 @@ in the string. Invalid codepoints will result in encode/decode failure.</p> <marker id="DiameterIdentity"/> -<code> +<pre> DiameterIdentity() = OctetString() -</code> +</pre> <p> A value must have length at least 1.</p> <marker id="DiameterURI"/> -<code> +<pre> DiameterURI() = OctetString() | #diameter_URI{type = Type, fqdn = FQDN, @@ -602,19 +632,19 @@ where Port = integer() Transport = sctp | tcp Protocol = diameter | radius | 'tacacs+' -</code> +</pre> <p> On encode, fields port, transport and protocol default to 3868, sctp and diameter respectively. The grammar of an OctetString-valued DiameterURI() is as specified in -section 4.3 of RFC 3588. +section 4.3 of &the_rfc;. The record representation is used on decode.</p> <marker id="Enumerated"/> -<code> +<pre> Enumerated() = Integer32() -</code> +</pre> <p> On encode, values can be specified using the macros defined in a @@ -622,10 +652,10 @@ dictionary's hrl file.</p> <marker id="IPFilterRule"/> <marker id="QoSFilterRule"/> -<code> +<pre> IPFilterRule() = OctetString() QoSFilterRule() = OctetString() -</code> +</pre> <p> Values of these types are not currently parsed by diameter.</p> @@ -639,9 +669,7 @@ Values of these types are not currently parsed by diameter.</p> <title>SEE ALSO</title> <p> -<seealso marker="diameterc">diameterc(1)</seealso>, -<seealso marker="diameter">diameter(3)</seealso>, -<seealso marker="diameter_app">diameter_app(3)</seealso></p> +&man_compile;, &man_main;, &man_app;, &man_codec;, &man_make;</p> </section> diff --git a/lib/diameter/doc/src/diameter_intro.xml b/lib/diameter/doc/src/diameter_intro.xml index bc2afbd453..fd578ccf45 100644 --- a/lib/diameter/doc/src/diameter_intro.xml +++ b/lib/diameter/doc/src/diameter_intro.xml @@ -1,5 +1,8 @@ <?xml version="1.0" encoding="latin1" ?> -<!DOCTYPE chapter SYSTEM "chapter.dtd"> +<!DOCTYPE chapter SYSTEM "chapter.dtd" [ + <!ENTITY % also SYSTEM "seealso.ent"> + %also; +]> <chapter> <header> @@ -35,7 +38,7 @@ under the License. <p> The diameter application is an implementation of the Diameter protocol -as defined by RFC 3588. +as defined by &the_rfc;. It supports arbitrary Diameter applications by way of a <em>dictionary</em> interface that allows messages and AVP's to be defined and input into diameter as configuration. @@ -86,9 +89,9 @@ dictionary module that provide encode/decode functionality for outgoing/incoming Diameter messages belonging to the application. A dictionary module is generated from a <seealso -marker="diameter_dict">specification file</seealso> using the <seealso +marker="diameter_dict">dictionary file</seealso> using the <seealso marker="diameterc">diameterc</seealso> utility. -Dictionaries for the RFC 3588 Diameter Common Messages, Base +Dictionaries for the &the_rfc; Diameter Common Messages, Base Accounting and Relay applications are provided with the diameter application.</p> diff --git a/lib/diameter/doc/src/diameter_make.xml b/lib/diameter/doc/src/diameter_make.xml new file mode 100644 index 0000000000..da6124310e --- /dev/null +++ b/lib/diameter/doc/src/diameter_make.xml @@ -0,0 +1,144 @@ +<?xml version="1.0" encoding="latin1" ?> +<!DOCTYPE erlref SYSTEM "erlref.dtd" [ + <!ENTITY filename + '<seealso marker="kernel:file#type-name">file:name()</seealso>'> + <!ENTITY dictionary + '<seealso marker="diameter_dict">dictionary file</seealso>'> + <!ENTITY % also SYSTEM "seealso.ent" > + <!ENTITY % here SYSTEM "seehere.ent" > + %also; + %here; +]> + +<erlref> +<header> +<copyright> +<year>2012</year> +<holder>Ericsson AB. All Rights Reserved.</holder> +</copyright> +<legalnotice> +The contents of this file are subject to the Erlang Public License, +Version 1.1, (the "License"); you may not use this file except in +compliance with the License. You should have received a copy of the +Erlang Public License along with this software. If not, it can be +retrieved online at http://www.erlang.org/. + +Software distributed under the License is distributed on an "AS IS" +basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +the License for the specific language governing rights and limitations +under the License. + +</legalnotice> + +<title>diameter_make(3)</title> +<prepared>Anders Svensson</prepared> +<responsible></responsible> +<docno></docno> +<approved></approved> +<checked></checked> +<date></date> +<rev></rev> +<file>diameter_make.xml</file> +</header> + +<module>diameter_make</module> +<modulesummary>Diameter dictionary compilation.</modulesummary> + +<description> + +<p> +The function &codec; is used to compile a diameter +&dictionary; into Erlang source. +The resulting source implements the interface diameter required +to encode and decode the dictionary's messages and AVP's.</p> + +<p> +The utility &man_compile; provides an alternate compilation +interface.</p> + +</description> + +<!-- ===================================================================== --> + +<funcs> + +<func> +<name>codec(Path::string(), [Opt]) -> ok | {error, Reason}</name> +<fsummary>Compile a dictionary file into Erlang source.</fsummary> +<desc> + +<p> +Compile a single dictionary file to Erlang source. +<c>Opt</c> can have the following types.</p> + +<taglist> + +<tag><c>{include, Dir::string()}</c></tag> +<item> +<p> +Prepend the specified directory to the code path. +Use to point at beam files compiled from inherited dictionaries, +<c>&dict_inherits;</c> in a dictionary file creating a beam +dependency, not an erl/hrl dependency.</p> + +<p> +Multiple <c>include</c> options can be specified.</p> +</item> + +<tag><c>{outdir, Dir::string()}</c></tag> +<item> +<p> +Write generated source to the specified directory. +Defaults to the current working directory.</p> +</item> + +<tag><c>{name|prefix, string()}</c></tag> +<item> +<p> +Set <c>&dict_name;</c> or <c>&dict_prefix;</c> to the specified +string. +Overrides any setting in the file itself.</p> +</item> + +<tag><c>{inherits, Mod::string()}</c></tag> +<item> +<p> +Append &dict_inherits; of the specified module. +Specifying <c>"-"</c> has the effect of discarding clearing any +previous inherits, both in the dictionary file and on the options +list.</p> + +<p> +Multiple <c>inherits</c> options can be specified.</p> +</item> + +</taglist> + +</desc> +</func> + +</funcs> + +<!-- ===================================================================== --> + +<section> +<title>BUGS</title> + +<p> +All options are string-valued. +In particular, it is not currently possible to +an &dict_inherits; module as an atom() or a path as a &filename;</p> + +</section> + +<!-- ===================================================================== --> + +<section> +<title>SEE ALSO</title> + +<p> +&man_compile;, &man_dict;</p> + +</section> + +</erlref> diff --git a/lib/diameter/doc/src/diameter_sctp.xml b/lib/diameter/doc/src/diameter_sctp.xml index 955169349c..5e3fd5eaf1 100644 --- a/lib/diameter/doc/src/diameter_sctp.xml +++ b/lib/diameter/doc/src/diameter_sctp.xml @@ -1,5 +1,16 @@ <?xml version="1.0" encoding="latin1" ?> -<!DOCTYPE erlref SYSTEM "erlref.dtd"> +<!DOCTYPE erlref SYSTEM "erlref.dtd" [ + <!ENTITY gen_sctp '<seealso marker="kernel:gen_sctp">gen_sctp(3)</seealso>'> + <!ENTITY gen_sctp_open1 + '<seealso marker="kernel:gen_sctp#open-1">gen_sctp:open/1</seealso>'> + <!ENTITY ip_address + '<seealso marker="kernel:inet#type-ip_address">inet:ip_address()</seealso>'> + <!ENTITY inet '<seealso marker="kernel:inet">inet(3)</seealso>'> + <!ENTITY % also SYSTEM "seealso.ent" > + <!ENTITY % here SYSTEM "seehere.ent" > + %also; + %here; +]> <erlref> <header> @@ -38,12 +49,11 @@ under the License. <description> <p> -This module implements diameter transport over SCTP using gen_sctp. +This module implements diameter transport over SCTP using &gen_sctp;. It can be specified as the value of a transport_module option to -<seealso -marker="diameter#add_transport">diameter:add_transport/2</seealso> +&mod_add_transport; and implements the behaviour documented in -<seealso marker="diameter_transport">diameter_transport(3)</seealso>.</p> +&man_transport;.</p> <marker id="start"/> </description> @@ -58,18 +68,17 @@ and implements the behaviour documented in <fsummary>Start a transport process.</fsummary> <type> <v>Type = connect | accept</v> -<v>Ref = <seealso marker="diameter#transport_ref">diameter:transport_ref()</seealso></v> +<v>Ref = &mod_transport_ref;</v> <v>Svc = #diameter_service{}</v> -<v>Opt = {raddr, <seealso marker="kernel:inet#type-ip_address">inet:ip_address()</seealso>} | {rport, integer()} | term()</v> +<v>Opt = {raddr, &ip_address;} | {rport, integer()} | term()</v> <v>Pid = pid()</v> -<v>LAddr = <seealso marker="kernel:inet#type-ip_address">inet:ip_address()</seealso></v> +<v>LAddr = &ip_address;</v> <v>Reason = term()</v> </type> <desc> <p> -The start function required by <seealso -marker="diameter_transport#start">diameter_transport(3)</seealso>.</p> +The start function required by &man_transport;.</p> <p> The only diameter_sctp-specific argument is the options list. @@ -80,8 +89,7 @@ unspecified. More than one <c>raddr</c> option can be specified, in which case the connecting transport in question attempts each in sequence until an association is established. -Remaining options are any accepted by <seealso -marker="kernel:gen_sctp#open-1">gen_sctp:open/1</seealso>, with the exception +Remaining options are any accepted by &gen_sctp_open1;, with the exception of options <c>mode</c>, <c>binary</c>, <c>list</c>, <c>active</c> and <c>sctp_events</c>. Note that options <c>ip</c> and <c>port</c> specify the local address @@ -98,14 +106,12 @@ connecting transport.</p> <warning> <p> An insufficiently large receive buffer may result in a peer having to -resend incoming messages: set the <seealso -marker="kernel:inet">inet(3)</seealso> option <c>recbuf</c> to increase +resend incoming messages: set the &inet; option <c>recbuf</c> to increase the buffer size.</p> <p> An insufficiently large send buffer may result in outgoing messages -being discarded: set the <seealso -marker="kernel:inet">inet(3)</seealso> option <c>sndbuf</c> to increase +being discarded: set the &inet; option <c>sndbuf</c> to increase the buffer size.</p> </warning> @@ -114,16 +120,13 @@ diameter_sctp uses the <c>transport_data</c> field of the <c>#diameter_packet{}</c> record to communicate the stream on which an inbound message has been received, or on which an outbound message should be sent: the value will be of the form <c>{stream, Id}</c> -on an inbound message passed to a <seealso -marker="diameter_app#handle_request">handle_request</seealso> or <seealso -marker="diameter_app#handle_answer">handle_answer</seealso> callback. +on an inbound message passed to a &app_handle_request; or +&app_handle_answer; callback. For an outbound message, either <c>undefined</c> (explicitly or by receiving the outbound message as a <c>binary()</c>) or a tuple -should be set in the return value of <seealso -marker="diameter_app#handle_request">handle_request</seealso> +should be set in the return value of &app_handle_request; (typically by retaining the value passed into this function) -or <seealso -marker="diameter_app#prepare_request">prepare_request</seealso>. +or &app_prepare_request;. The value <c>undefined</c> uses a "next outbound stream" id and increments this modulo the total number outbound streams. That is, successive values of <c>undefined</c> cycle through all @@ -144,9 +147,7 @@ outbound streams.</p> <title>SEE ALSO</title> <p> -<seealso marker="diameter_transport">diameter_transport(3)</seealso>, -<seealso marker="kernel:gen_sctp">gen_sctp(3)</seealso>, -<seealso marker="kernel:inet">inet(3)</seealso></p> +&man_main;, &man_transport;, &gen_sctp;, &inet;</p> </section> diff --git a/lib/diameter/doc/src/diameter_soc.xml b/lib/diameter/doc/src/diameter_soc.xml index 6b9ef9f756..16f6b9d5bb 100644 --- a/lib/diameter/doc/src/diameter_soc.xml +++ b/lib/diameter/doc/src/diameter_soc.xml @@ -1,11 +1,15 @@ <?xml version="1.0" encoding="latin1" ?> -<!DOCTYPE chapter SYSTEM "chapter.dtd"> +<!DOCTYPE chapter SYSTEM "chapter.dtd" [ + <!ENTITY % also SYSTEM "seealso.ent" > + %also; +]> <chapter> <header> <copyright> <year>2011</year> +<year>2012</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> @@ -41,38 +45,20 @@ Known points of questionable or non-compliance.</p> <!-- ===================================================================== --> <section> -<title>RFC 3588</title> +<title>&the_rfc;</title> <list> <item> <p> -The End-to-End Security framework (section 2.9) isn't implemented -since it is largely unspecified. -The document that was to describe it -(reference [AAACMS]) was abandoned in an uncompleted state several -years ago and the current draft RFC deprecates the framework, -including the P Flag in the AVP header.</p> -</item> - -<item> -<p> -There is no TLS support over SCTP. -RFC 3588 requires that a Diameter server support TLS but in -practise this seems to mean TLS over SCTP since there are limitations -with running over SCTP: see RFC 6083 (DTLS over SCTP), which is a -response to RFC 3436 (TLS over SCTP). -The current RFC 3588 draft acknowledges this by equating -TLS with TLS/TCP and DTLS/SCTP but we do not yet support DTLS.</p> +There is no support for DTLS over SCTP.</p> </item> <item> <p> There is no explicit support for peer discovery (section 5.2). It can possibly be implemented on top of diameter as is but this is -probably something that diameter should do. -The current draft deprecates portions of the original RFC's mechanisms -however.</p> +probably something that diameter should do.</p> </item> <item> diff --git a/lib/diameter/doc/src/diameter_tcp.xml b/lib/diameter/doc/src/diameter_tcp.xml index 3ffcebfd90..e3b8c733b7 100644 --- a/lib/diameter/doc/src/diameter_tcp.xml +++ b/lib/diameter/doc/src/diameter_tcp.xml @@ -1,5 +1,27 @@ <?xml version="1.0" encoding="latin1" ?> -<!DOCTYPE erlref SYSTEM "erlref.dtd"> +<!DOCTYPE erlref SYSTEM "erlref.dtd" [ + <!ENTITY gen_tcp_connect3 + '<seealso marker="kernel:gen_tcp#connect-3">gen_tcp:connect/3</seealso>'> + <!ENTITY gen_tcp_listen2 + '<seealso marker="kernel:gen_tcp#listen-2">gen_tcp:listen/2</seealso>'> + <!ENTITY ip_address + '<seealso marker="kernel:inet#type-ip_address">inet:ip_address()</seealso>'> + <!ENTITY ssl_connect2 + '<seealso marker="ssl:ssl#connect-2">ssl:connect/2</seealso>'> + <!ENTITY ssl_connect3 + '<seealso marker="ssl:ssl#connect-3">ssl:connect/3</seealso>'> + <!ENTITY ssl_accept2 + '<seealso marker="ssl:ssl#ssl_accept-2">ssl:ssl_accept/2</seealso>'> + <!ENTITY ssl_listen2 + '<seealso marker="ssl:ssl#listen-2">ssl:listen/2</seealso>'> + <!ENTITY gen_tcp '<seealso marker="kernel:gen_tcp">gen_tcp(3)</seealso>'> + <!ENTITY inet '<seealso marker="kernel:inet">inet(3)</seealso>'> + <!ENTITY ssl '<seealso marker="ssl:ssl">ssl(3)</seealso>'> + <!ENTITY % also SYSTEM "seealso.ent" > + <!ENTITY % here SYSTEM "seehere.ent" > + %also; + %here; +]> <erlref> <header> @@ -38,15 +60,13 @@ under the License. <description> <p> -This module implements diameter transport over TCP using <seealso -marker="kernel:gen_tcp">gen_tcp</seealso>. +This module implements diameter transport over TCP using &gen_tcp;. It can be specified as the value of a <c>transport_module</c> option to -<seealso -marker="diameter#add_transport">diameter:add_transport/2</seealso> +&mod_add_transport; and implements the behaviour documented in -<seealso marker="diameter_transport">diameter_transport(3)</seealso>. +&man_transport;. TLS security is supported, both as an upgrade following -capabilities exchange as specified by RFC 3588 and +capabilities exchange as specified by &the_rfc; and at connection establishment as in the current draft standard.</p> <p> @@ -66,13 +86,13 @@ before configuring TLS capability on diameter transports.</p> <fsummary>Start a transport process.</fsummary> <type> <v>Type = connect | accept</v> -<v>Ref = <seealso marker="diameter#transport_ref">diameter:transport_ref()</seealso></v> +<v>Ref = &mod_transport_ref;</v> <v>Svc = #diameter_service{}</v> <v>Opt = OwnOpt | SslOpt | TcpOpt</v> <v>Pid = pid()</v> -<v>LAddr = <seealso marker="kernel:inet#type-ip_address">inet:ip_address()</seealso></v> +<v>LAddr = &ip_address;</v> <v>Reason = term()</v> -<v>OwnOpt = {raddr, <seealso marker="kernel:inet#type-ip_address">inet:ip_address()</seealso>} +<v>OwnOpt = {raddr, &ip_address;} | {rport, integer()} | {port, integer()}</v> <v>SslOpt = {ssl_options, true | list()}</v> @@ -81,8 +101,7 @@ before configuring TLS capability on diameter transports.</p> <desc> <p> -The start function required by <seealso -marker="diameter_transport#start">diameter_transport(3)</seealso>.</p> +The start function required by &man_transport;.</p> <p> The only diameter_tcp-specific argument is the options list. @@ -92,16 +111,12 @@ transport. Option <c>ssl_options</c> must be specified for a transport that should support TLS: a value of <c>true</c> results in a TLS handshake immediately upon connection establishment while -<c>list()</c> specifies options to be passed to <seealso -marker="ssl:ssl#connect-2">ssl:connect/2</seealso> or -<seealso marker="ssl:ssl#ssl_accept-2">ssl:ssl_accept/2</seealso> +<c>list()</c> specifies options to be passed to &ssl_connect2; or +&ssl_accept2; after capabilities exchange if TLS is negotiated. -Remaining options are any accepted by <seealso -marker="ssl:ssl#connect-3">ssl:connect/3</seealso> or <seealso -marker="kernel:gen_tcp#connect-3">gen_tcp:connect/3</seealso> for -a connecting transport, or <seealso -marker="ssl:ssl#listen-2">ssl:listen/2</seealso> or <seealso -marker="kernel:gen_tcp#listen-2">gen_tcp:listen/2</seealso> for +Remaining options are any accepted by &ssl_connect3; or +&gen_tcp_connect3; for +a connecting transport, or &ssl_listen2; or &gen_tcp_listen2; for a listening transport, depending on whether or not <c>{ssl_options, true}</c> has been specified. Options <c>binary</c>, @@ -115,10 +130,8 @@ Note that the option <c>ip</c> specifies the local address.</p> An <c>ssl_options</c> list must be specified if and only if the transport in question has set <c>Inband-Security-Id</c> to 1 (<c>TLS</c>), as -specified to either <seealso -marker="diameter#start_service">start_service/2</seealso> or -<seealso -marker="diameter#add_transport">add_transport/2</seealso>, +specified to either &mod_start_service; or +&mod_add_transport;, so that the transport process will receive notification of whether or not to commence with a TLS handshake following capabilities exchange. @@ -149,11 +162,7 @@ The returned local address list has length one.</p> <title>SEE ALSO</title> <p> -<seealso marker="diameter">diameter(3)</seealso>, -<seealso marker="diameter_transport">diameter_transport(3)</seealso>, -<seealso marker="kernel:gen_tcp">gen_tcp(3)</seealso>, -<seealso marker="kernel:inet">inet(3)</seealso>, -<seealso marker="ssl:ssl">ssl(3)</seealso></p> +&man_main;, &man_transport;, &gen_tcp;, &inet;, &ssl;</p> </section> diff --git a/lib/diameter/doc/src/diameter_transport.xml b/lib/diameter/doc/src/diameter_transport.xml index 9ab750e560..55b531155f 100644 --- a/lib/diameter/doc/src/diameter_transport.xml +++ b/lib/diameter/doc/src/diameter_transport.xml @@ -1,5 +1,13 @@ <?xml version="1.0" encoding="latin1" ?> -<!DOCTYPE erlref SYSTEM "erlref.dtd"> +<!DOCTYPE erlref SYSTEM "erlref.dtd" [ + <!ENTITY message '<seealso marker="#message">message()</seealso>'> + <!ENTITY ip_address + '<seealso marker="kernel:inet#type-ip_address">inet:ip_address()</seealso>'> + <!ENTITY % also SYSTEM "seealso.ent" > + <!ENTITY % here SYSTEM "seehere.ent" > + %also; + %here; +]> <erlref> <header> @@ -38,82 +46,116 @@ under the License. <description> <p> -A module specified as a <c>transport_module</c> to <seealso -marker="diameter#add_transport">diameter:add_transport/2</seealso> +A module specified as a <c>transport_module</c> to &mod_add_transport; must implement the interface documented here. The interface consists of a function with which diameter starts a transport process and a message interface with which the transport process communicates with the process that starts it (aka its parent).</p> -<marker id="start"/> </description> <!-- ===================================================================== --> +<section> +<title>DATA TYPES</title> + +<taglist> + +<marker id="message"/> + +<tag><c>message() = binary() | &codec_packet;</c></tag> +<item> +<p> +A Diameter message as passed over the transport interface.</p> + +<p> +For an inbound message from a transport process, a &codec_packet; must +contain the received message in its <c>bin</c> field. +In the case of an inbound request, any value set in the +<c>transport_data</c> field will passed back to the transport module +in the corresponding answer message, unless the sender supplies +another value.</p> + +<p> +For an outbound message to a transport process, a &codec_packet; has a +value other than <c>undefined</c> in its <c>transport_data</c> field +and has the binary() to send in its <c>bin</c> field.</p> +</item> + +</taglist> + +</section> + +<!-- ===================================================================== --> + <funcs> <func> -<name>Mod:start({Type, Ref}, Svc, Opts) - -> {ok, Pid} | {ok, Pid, LAddrs} | {error, Reason}</name> +<name>Mod:start({Type, Ref}, Svc, Config) + -> {ok, Pid} + | {ok, Pid, LAddrs} + | {error, Reason}</name> <fsummary>Start a transport process.</fsummary> <type> <v>Type = connect | accept</v> -<v>Ref = <seealso marker="diameter#transport_ref">diameter:transport_ref()</seealso></v> +<v>Ref = &mod_transport_ref;</v> <v>Svc = #diameter_service{}</v> -<v>Opts = term()</v> +<v>Config = term()</v> <v>Pid = pid()</v> -<v>LAddrs = [<seealso marker="kernel:inet#type-ip_address">inet:ip_address()</seealso>]</v> +<v>LAddrs = [&ip_address;]</v> <v>Reason = term()</v> </type> <desc> <p> Start a transport process. -Called by diameter as a consequence of a call to <seealso -marker="diameter#add_transport">diameter:add_transport/2</seealso> in +Called by diameter as a consequence of a call to &mod_add_transport; in order to establish or accept a transport connection respectively. A transport process maintains a connection with a single remote peer.</p> <p> -The first argument indicates whether the transport process in question -is being started for a connecting (<c>connect</c>) or listening -(<c>accept</c>) transport. +<c>Type</c> indicates whether the transport process in question +is being started for a connecting (<c>Type=connect</c>) or listening +(<c>Type=accept</c>) transport. In the latter case, transport processes are started as required to -accept connections from multiple peers. -Ref is in each case the same value that was returned from the -call to <seealso -marker="diameter#add_transport">diameter:add_transport/2</seealso> +accept connections from multiple peers.</p> + +<p> +Ref is the value that was returned from the call to &mod_add_transport; that has lead to starting of a transport process.</p> <p> -A transport process must implement the message interface documented below. -It should retain the pid of its parent, monitor the parent and terminate if -it dies. -It should not link to the parent. -It should exit if its transport connection with its peer is lost.</p> +<c>Svc</c> contains the capabilities passed to &mod_start_service; and +&mod_add_transport;, values passed to the latter overriding those +passed to the former.</p> + +<p> +<c>Config</c> is as passed in <c>transport_config</c> tuple in the +&mod_transport_opt; list passed to &mod_add_transport;.</p> <p> -The capabilities in the <c>#diameter_service{}</c> record are as -passed to <seealso -marker="diameter#start_service">diameter:start_service/2</seealso> and -<seealso -marker="diameter#add_transport">diameter:add_transport/2</seealso>, -values passed to the latter overriding those passed to the former. The start function should use the <c>Host-IP-Address</c> list and/or -<c>Opts</c> to select an appropriate list of local IP addresses, +<c>Config</c> to select an appropriate list of local IP addresses, and should return this list if different from the <c>#diameter_service{}</c> addresses. The returned list is used to populate <c>Host-IP-Address</c> AVPs in outgoing capabilities exchange messages, the <c>#diameter_service{}</c> addresses being used otherwise.</p> -<marker id="MESSAGES"/> +<p> +A transport process must implement the message interface documented below. +It should retain the pid of its parent, monitor the parent and terminate if +it dies. +It should not link to the parent. +It should exit if its transport connection with its peer is lost.</p> + </desc> </func> </funcs> <!-- ===================================================================== --> +<marker id="MESSAGES"/> <section> <title>MESSAGES</title> @@ -123,27 +165,23 @@ All messages sent over the transport interface are of the form <c>{diameter, term()}</c>.</p> <p> -A transport process can expect the following messages from -diameter.</p> +A transport process can expect messages of the following types from +its parent.</p> <taglist> -<tag><c>{diameter, {send, Packet}}</c></tag> +<tag><c>{diameter, {send, &message;}}</c></tag> <item> <p> -An outbound Diameter message. -<c>Packet</c> can be either binary() (the message to be sent) -or a <c>#diameter_packet{}</c> record whose <c>transport_data</c> -field contains a value other than undefined and whose <c>bin</c> field -contains the binary to send.</p> +An outbound Diameter message.</p> </item> <tag><c>{diameter, {close, Pid}}</c></tag> <item> <p> -A request to close the transport connection. -The transport process should terminate after closing the -connection. +A request to terminate the transport process after having received DPA +in response to DPR. +The transport process should exit. <c>Pid</c> is the pid() of the parent process.</p> </item> @@ -178,7 +216,7 @@ TLS.</p> </taglist> <p> -A transport process should send the following messages +A transport process should send messages of the following types to its parent.</p> <taglist> @@ -201,19 +239,10 @@ Not sent if the transport process has <c>Type=accept</c>. endpoint to which the transport has connected.</p> </item> -<tag><c>{diameter, {recv, Packet}}</c></tag> +<tag><c>{diameter, {recv, &message;}}</c></tag> <item> <p> -An inbound Diameter message. -<c>Packet</c> can be either binary() (the received message) -or a <c>#diameter_packet{}</c> record -whose <c>bin</c> field contains the received binary(). -Any value (other than <c>undefined</c>) set in -the <c>transport_data</c> field will be passed back with a -corresponding answer message in the case that the inbound message is a -request unless the sender sets another value. -How <c>transport_data</c> is used/interpreted is up to the -transport module.</p> +An inbound Diameter message.</p> </item> <tag><c>{diameter, {tls, Ref}}</c></tag> @@ -237,8 +266,7 @@ A transport must exit if a handshake is not successful.</p> <title>SEE ALSO</title> <p> -<seealso marker="diameter_tcp">diameter_tcp(3)</seealso>, -<seealso marker="diameter_sctp">diameter_sctp(3)</seealso></p> +&man_tcp;, &man_sctp;</p> </section> diff --git a/lib/diameter/doc/src/files.mk b/lib/diameter/doc/src/files.mk index 79d53abceb..00ced3d91e 100644 --- a/lib/diameter/doc/src/files.mk +++ b/lib/diameter/doc/src/files.mk @@ -2,7 +2,7 @@ # %CopyrightBegin% # -# Copyright Ericsson AB 2010-2011. All Rights Reserved. +# Copyright Ericsson AB 2010-2012. All Rights Reserved. # # The contents of this file are subject to the Erlang Public License, # Version 1.1, (the "License"); you may not use this file except in @@ -26,6 +26,8 @@ XML_REF1_FILES = \ XML_REF3_FILES = \ diameter.xml \ diameter_app.xml \ + diameter_codec.xml \ + diameter_make.xml \ diameter_transport.xml \ diameter_tcp.xml \ diameter_sctp.xml diff --git a/lib/diameter/doc/src/notes.xml b/lib/diameter/doc/src/notes.xml index e57958ac09..d448b01eba 100644 --- a/lib/diameter/doc/src/notes.xml +++ b/lib/diameter/doc/src/notes.xml @@ -1,11 +1,17 @@ <?xml version="1.0" encoding="latin1" ?> -<!DOCTYPE chapter SYSTEM "chapter.dtd"> +<!DOCTYPE chapter SYSTEM "chapter.dtd" [ + <!ENTITY % also SYSTEM "seealso.ent" > + <!ENTITY % here SYSTEM "seehere.ent" > + %also; + %here; +]> <chapter> <header> <copyright> <year>2011</year> +<year>2012</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -36,6 +42,163 @@ first.</p> <!-- ===================================================================== --> +<section><title>Diameter 1.3</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + Fix faulty handling of Origin-State-Id and faulty config + values.</p> + <p> + The former was expected in a list despite the + documentation requiring (correctly) an integer. A bare + value for a list-valued capability was not handled.</p> + <p> + Own Id: OTP-10440</p> + </item> + <item> + <p> + Fix timing of up/down events.</p> + <p> + Previously, a call to diameter:call/4 following a peer_up + callback might incorrectly return {error, no_connection}, + depending on timing. Both events now follow the + corresponding callbacks.</p> + <p> + Own Id: OTP-10459</p> + </item> + <item> + <p> + Make diameter:service_info/2 usable in peer_up, peer_down + and pick_peer callbacks.</p> + <p> + Except for in pick_peer when {call_mutates_state, false}, + it would previously hang indefinitely.</p> + <p> + Own Id: OTP-10460</p> + </item> + <item> + <p> + Verify that End-to-End and Hop-by-Hop Identifiers in an + incoming CEA/DPA match those sent in the corresponding + CER/DPR.</p> + <p> + The values were previously ignored. Answers whose + identifiers do not match are handled as unexpected.</p> + <p> + Own Id: OTP-10565</p> + </item> + <item> + <p> + Fix formatting problems in PDF documentation.</p> + <p> + In particular, text corresponding to links in HTML was + omitted in preformatted blocks. There are still issues + with indentation but this is not diameter-specific.</p> + <p> + Own Id: OTP-10583</p> + </item> + </list> + </section> + + + <section><title>Improvements and New Features</title> + <list> + <item> + <p> + Let prepare_request, prepare_retransmit and + handle_request callbacks return a function to be invoked + on outgoing messages after encode.</p> + <p> + This allows encoded messages to be logged for example.</p> + <p> + Own Id: OTP-10441</p> + </item> + <item> + <p> + Add service_opt() 'restrict_connections' to allow + multiple transport connections with the same peer.</p> + <p> + Own Id: OTP-10443</p> + </item> + <item> + <p> + Add service_opt() 'sequence' to allow the masking of a + constant onto the topmost bits of End-to-End and + Hop-by-Hop identifiers.</p> + <p> + This allows the same service on different nodes to use + distinct values in outgoing request messages.</p> + <p> + Own Id: OTP-10445</p> + </item> + <item> + <p> + Add diameter:service_info(PeerRef) to return the + transport_ref() and transport_opt() list of the + corresponding transport.</p> + <p> + This allows easy access to these from diameter_app + callbacks that only get peer_ref() as an argument.</p> + <p> + Own Id: OTP-10470</p> + </item> + <item> + <p> + Add reference pages diameter_codec(3) and + diameter_make(3).</p> + <p> + Own Id: OTP-10471</p> + </item> + <item> + <p> + Add events for service start and stop.</p> + <p> + Own Id: OTP-10492</p> + </item> + <item> + <p> + Add transport_opt() 'disconnect_cb' to make the sending + of DPR configurable.</p> + <p> + Whether or not DPR should be sent at application stop, + service stop or transport removal is determined by the + value returned by the callback, as is the + Disconnect-Cause and timeout if DPA is not received.</p> + <p> + Own Id: OTP-10493</p> + </item> + <item> + <p> + Add transport_opt() 'capx_timeout' for the timeout + associated with non-reception of CER/CEA.</p> + <p> + Own Id: OTP-10554</p> + </item> + <item> + <p> + Allow a handle_request callback to return a + #diameter_packet{}.</p> + <p> + This allows an answer to set transport_data and header + fields.</p> + <p> + Own Id: OTP-10566</p> + </item> + <item> + <p> + Update documentation for RFC 6733.</p> + <p> + RFC 3588 is now obsolete.</p> + <p> + Own Id: OTP-10568</p> + </item> + </list> + </section> + +</section> + <section><title>Diameter 1.2</title> <section><title>Fixed Bugs and Malfunctions</title> @@ -136,6 +299,33 @@ first.</p> </section> +<section><title>Diameter 1.1</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + Fix fault in sending of 'closed' events.</p> + <p> + The fault made it possible for the 'closed' event not to + be sent following a failed capabilities exchange.</p> + <p> + Own Id: OTP-9824</p> + </item> + <item> + <p> + Fix faulty diameterc -name/-prefix.</p> + <p> + A minor blunder when introducing the new dictionary + parser in diameter-1.0 broke these options.</p> + <p> + Own Id: OTP-9826</p> + </item> + </list> + </section> + +</section> + <section><title>Diameter 1.0</title> <section><title>Fixed Bugs and Malfunctions</title> @@ -395,8 +585,7 @@ Known issues or limitations:</p> Some agent-related functionality is not entirely complete. In particular, support for proxy agents, that advertise specific Diameter applications but otherwise relay messages in much the same -way as relay agents (for which a <seealso -marker="diameter_app#handle_request">handle_request/3</seealso> +way as relay agents (for which a handle_request callback can return a <c>relay</c> tuple), will be completed in an upcoming release. There may also be more explicit support for redirect agents, although @@ -428,8 +617,7 @@ could likely be expanded upon.</p> <item> <p> -The function <seealso -marker="diameter#service_info">diameter:service_info/2</seealso> +The function diameter:service_info/2 can be used to retrieve information about a started service (statistics, information about connected peers, etc) but this is not yet documented and both the input and output may change diff --git a/lib/diameter/doc/src/ref_man.xml b/lib/diameter/doc/src/ref_man.xml index 137ce79094..4b99fe716d 100644 --- a/lib/diameter/doc/src/ref_man.xml +++ b/lib/diameter/doc/src/ref_man.xml @@ -6,6 +6,7 @@ <header> <copyright> <year>2011</year> +<year>2012</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -40,7 +41,9 @@ applications on top of the Diameter protocol. </p> <xi:include href="diameter.xml"/> <xi:include href="diameter_compile.xml"/> <xi:include href="diameter_app.xml"/> +<xi:include href="diameter_codec.xml"/> <xi:include href="diameter_dict.xml"/> +<xi:include href="diameter_make.xml"/> <xi:include href="diameter_transport.xml"/> <xi:include href="diameter_tcp.xml"/> <xi:include href="diameter_sctp.xml"/> diff --git a/lib/diameter/doc/src/seealso.ent b/lib/diameter/doc/src/seealso.ent new file mode 100644 index 0000000000..4647c42f85 --- /dev/null +++ b/lib/diameter/doc/src/seealso.ent @@ -0,0 +1,132 @@ +<?xml version="1.0" encoding="iso-8859-1" ?> + +<!-- + +%CopyrightBegin% + +Copyright Ericsson AB 2012. All Rights Reserved. + +The contents of this file are subject to the Erlang Public License, +Version 1.1, (the "License"); you may not use this file except in +compliance with the License. You should have received a copy of the +Erlang Public License along with this software. If not, it can be +retrieved online at http://www.erlang.org/. + +Software distributed under the License is distributed on an "AS IS" +basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +the License for the specific language governing rights and limitations +under the License. + +%CopyrightEnd% + +--> + +<!-- + +Entities for cross references: less to type, easier to read and +less error prone. + +Additional intra-document entities are generated by seehere.sed. +That each definition is on a single (hideously long) line is +significant. + +--> + +<!ENTITY the_rfc 'RFC 6733'> + +<!-- diameter --> + +<!ENTITY mod_add_transport '<seealso marker="diameter#add_transport-2">diameter:add_transport/2</seealso>'> +<!ENTITY mod_call '<seealso marker="diameter#call-4">diameter:call/4</seealso>'> +<!ENTITY mod_origin_state_id '<seealso marker="diameter#origin_state_id-0">diameter:origin_state_id/0</seealso>'> +<!ENTITY mod_remove_transport '<seealso marker="diameter#remove_transport-2">diameter:remove_transport/2</seealso>'> +<!ENTITY mod_service_info '<seealso marker="diameter#service_info-2">diameter:service_info/2</seealso>'> +<!ENTITY mod_services '<seealso marker="diameter#services-0">diameter:services/0</seealso>'> +<!ENTITY mod_start_service '<seealso marker="diameter#start_service-2">diameter:start_service/2</seealso>'> +<!ENTITY mod_stop_service '<seealso marker="diameter#stop_service-1">diameter:stop_service/1</seealso>'> +<!ENTITY mod_subscribe '<seealso marker="diameter#subscribe-1">diameter:subscribe/1</seealso>'> + +<!ENTITY mod_application_alias '<seealso marker="diameter#application_alias">diameter:application_alias()</seealso>'> +<!ENTITY mod_application_module '<seealso marker="diameter#application_module">diameter:application_module()</seealso>'> +<!ENTITY mod_application_opt '<seealso marker="diameter#application_opt">diameter:application_opt()</seealso>'> +<!ENTITY mod_call_opt '<seealso marker="diameter#call_opt">diameter:call_opt()</seealso>'> +<!ENTITY mod_capability '<seealso marker="diameter#capability">diameter:capability()</seealso>'> +<!ENTITY mod_evaluable '<seealso marker="diameter#evaluable">diameter:evaluable()</seealso>'> +<!ENTITY mod_peer_filter '<seealso marker="diameter#peer_filter">diameter:peer_filter()</seealso>'> +<!ENTITY mod_service_event '<seealso marker="diameter#service_event">diameter:service_event()</seealso>'> +<!ENTITY mod_service_name '<seealso marker="diameter#service_name">diameter:service_name()</seealso>'> +<!ENTITY mod_service_opt '<seealso marker="diameter#service_opt">diameter:service_opt()</seealso>'> +<!ENTITY mod_transport_opt '<seealso marker="diameter#transport_opt">diameter:transport_opt()</seealso>'> +<!ENTITY mod_transport_ref '<seealso marker="diameter#transport_ref">diameter:transport_ref()</seealso>'> + +<!ENTITY capabilities_cb '<seealso marker="#capabilities_cb">capabilities_cb</seealso>'> +<!ENTITY capx_timeout '<seealso marker="#capx_timeout">capx_timeout</seealso>'> +<!ENTITY disconnect_cb '<seealso marker="#disconnect_cb">disconnect_cb</seealso>'> +<!ENTITY transport_config '<seealso marker="#transport_config">transport_config</seealso>'> +<!ENTITY transport_module '<seealso marker="#transport_module">transport_module</seealso>'> +<!ENTITY reconnect_timer '<seealso marker="#reconnect_timer">reconnect_timer</seealso>'> +<!ENTITY watchdog_timer '<seealso marker="#watchdog_timer">watchdog_timer</seealso>'> + +<!-- diameter_app --> + +<!ENTITY app_handle_answer '<seealso marker="diameter_app#Mod:handle_answer-4">handle_answer/4</seealso>'> +<!ENTITY app_handle_request '<seealso marker="diameter_app#Mod:handle_request-3">handle_request/3</seealso>'> +<!ENTITY app_handle_error '<seealso marker="diameter_app#Mod:handle_error-4">handle_error/4</seealso>'> +<!ENTITY app_peer_down '<seealso marker="diameter_app#Mod:peer_down-3">peer_up/3</seealso>'> +<!ENTITY app_peer_up '<seealso marker="diameter_app#Mod:peer_up-3">peer_up/3</seealso>'> +<!ENTITY app_pick_peer '<seealso marker="diameter_app#Mod:pick_peer-4">pick_peer/4</seealso>'> +<!ENTITY app_prepare_retransmit '<seealso marker="diameter_app#Mod:prepare_retransmit-3">prepare_retransmit/3</seealso>'> +<!ENTITY app_prepare_request '<seealso marker="diameter_app#Mod:prepare_request-3">prepare_request/3</seealso>'> + +<!ENTITY app_capabilities '<seealso marker="diameter_app#capabilities">diameter_app:capabilities()</seealso>'> +<!ENTITY app_peer '<seealso marker="diameter_app#peer">diameter_app:peer()</seealso>'> +<!ENTITY app_peer_ref '<seealso marker="diameter_app#peer_ref">diameter_app:peer_ref()</seealso>'> +<!ENTITY app_state '<seealso marker="diameter_app#state">diameter_app:state()</seealso>'> + +<!-- diameter_codec --> + +<!ENTITY codec_encode '<seealso marker="diameter_codec#encode-2">diameter_codec:encode/2</seealso>'> +<!ENTITY codec_decode '<seealso marker="diameter_codec#decode-2">diameter_codec:decode/2</seealso>'> + +<!ENTITY codec_avp '<seealso marker="diameter_codec#avp">diameter_codec:avp()</seealso>'> +<!ENTITY codec_header '<seealso marker="diameter_codec#header">diameter_codec:header()</seealso>'> +<!ENTITY codec_dictionary '<seealso marker="diameter_codec#dictionary">diameter_codec:dictionary()</seealso>'> +<!ENTITY codec_message '<seealso marker="diameter_codec#message">diameter_codec:message()</seealso>'> +<!ENTITY codec_packet '<seealso marker="diameter_codec#packet">diameter_codec:packet()</seealso>'> + +<!-- diameter_dict --> + +<!ENTITY dict_data_types '<seealso marker="diameter_dict#DATA_TYPES">diameter_dict(4)</seealso>'> + +<!ENTITY dict_Address '<seealso marker="diameter_dict#DATA_TYPES">Address()</seealso>'> +<!ENTITY dict_DiameterIdentity '<seealso marker="diameter_dict#DATA_TYPES">DiameterIdentity()</seealso>'> +<!ENTITY dict_Grouped '<seealso marker="diameter_dict#DATA_TYPES">Grouped()</seealso>'> +<!ENTITY dict_OctetString '<seealso marker="diameter_dict#DATA_TYPES">OctetString()</seealso>'> +<!ENTITY dict_Time '<seealso marker="diameter_dict#DATA_TYPES">Time()</seealso>'> +<!ENTITY dict_UTF8String '<seealso marker="diameter_dict#DATA_TYPES">UTF8String()</seealso>'> +<!ENTITY dict_Unsigned32 '<seealso marker="diameter_dict#DATA_TYPES">Unsigned32()</seealso>'> + +<!ENTITY dict_name '<seealso marker="diameter_dict#name">@name</seealso>'> +<!ENTITY dict_prefix '<seealso marker="diameter_dict#prefix">@prefix</seealso>'> +<!ENTITY dict_inherits '<seealso marker="diameter_dict#inherits">@inherits</seealso>'> + +<!-- diameter_make --> + +<!ENTITY make_codec '<seealso marker="diameter_make#codec-2">diameter_make:codec/2</seealso>'> + +<!-- diameter_transport --> + +<!ENTITY transport_start + '<seealso marker="diameter_transport#Mod:start-3">start/3</seealso>'> + +<!-- reference pages --> + +<!ENTITY man_compile '<seealso marker="diameterc">diameterc(1)</seealso>'> +<!ENTITY man_main '<seealso marker="diameter">diameter(3)</seealso>'> +<!ENTITY man_app '<seealso marker="diameter_app">diameter_app(3)</seealso>'> +<!ENTITY man_codec '<seealso marker="diameter_codec">diameter_codec(3)</seealso>'> +<!ENTITY man_dict '<seealso marker="diameter_dict">diameter_dict(4)</seealso>'> +<!ENTITY man_make '<seealso marker="diameter_make">diameter_make(3)</seealso>'> +<!ENTITY man_transport '<seealso marker="diameter_transport">diameter_transport(3)</seealso>'> +<!ENTITY man_sctp '<seealso marker="diameter_sctp">diameter_sctp(3)</seealso>'> +<!ENTITY man_tcp '<seealso marker="diameter_tcp">diameter_tcp(3)</seealso>'> diff --git a/lib/diameter/doc/src/seehere.sed b/lib/diameter/doc/src/seehere.sed new file mode 100644 index 0000000000..c62a783d40 --- /dev/null +++ b/lib/diameter/doc/src/seehere.sed @@ -0,0 +1,35 @@ +# +# %CopyrightBegin% +# +# Copyright Ericsson AB 2012. All Rights Reserved. +# +# The contents of this file are subject to the Erlang Public License, +# Version 1.1, (the "License"); you may not use this file except in +# compliance with the License. You should have received a copy of the +# Erlang Public License along with this software. If not, it can be +# retrieved online at http://www.erlang.org/. +# +# Software distributed under the License is distributed on an "AS IS" +# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +# the License for the specific language governing rights and limitations +# under the License. +# +# %CopyrightEnd% + +# +# Map entities for inter-document references to ones for +# intra-document references like this: +# +# <!ENTITY aaa_xxx '<seealso marker="bbb#yyy">ccc:zzz</seealso>'> +# +# ===> +# +# <!ENTITY xxx '<seealso marker="#yyy">zzz</seealso>'> +# + +/<!ENTITY/!d +/#/!d +/"#/d +s@ [^_]*_@ @ +s@"[^#]*#@"#@ +s@>[^:]*:@>@ diff --git a/lib/diameter/doc/standard/draft-ietf-dime-capablities-update-07.txt b/lib/diameter/doc/standard/draft-ietf-dime-capablities-update-07.txt deleted file mode 100644 index bb7ec2d08c..0000000000 --- a/lib/diameter/doc/standard/draft-ietf-dime-capablities-update-07.txt +++ /dev/null @@ -1,392 +0,0 @@ -
-
-
-Network Working Group K. Jiao
-Internet-Draft Huawei
-Intended status: Standards Track G. Zorn
-Expires: April 27, 2011 Network Zen
- October 24, 2010
-
-
- The Diameter Capabilities Update Application
- draft-ietf-dime-capablities-update-07
-
-Abstract
-
- This document defines a new Diameter application and associated
- command codes. The Capabilities Update application is intended to
- allow the dynamic update of certain Diameter peer capabilities while
- the peer-to-peer connection is in the open state.
-
-Status of this Memo
-
- This Internet-Draft is submitted in full conformance with the
- provisions of BCP 78 and BCP 79.
-
- Internet-Drafts are working documents of the Internet Engineering
- Task Force (IETF). Note that other groups may also distribute
- working documents as Internet-Drafts. The list of current Internet-
- Drafts is at http://datatracker.ietf.org/drafts/current/.
-
- Internet-Drafts are draft documents valid for a maximum of six months
- and may be updated, replaced, or obsoleted by other documents at any
- time. It is inappropriate to use Internet-Drafts as reference
- material or to cite them other than as "work in progress."
-
- This Internet-Draft will expire on April 27, 2011.
-
-Copyright Notice
-
- Copyright (c) 2010 IETF Trust and the persons identified as the
- document authors. All rights reserved.
-
- This document is subject to BCP 78 and the IETF Trust's Legal
- Provisions Relating to IETF Documents
- (http://trustee.ietf.org/license-info) in effect on the date of
- publication of this document. Please review these documents
- carefully, as they describe your rights and restrictions with respect
- to this document. Code Components extracted from this document must
- include Simplified BSD License text as described in Section 4.e of
- the Trust Legal Provisions and are provided without warranty as
- described in the Simplified BSD License.
-
-
-
-Jiao & Zorn Expires April 27, 2011 [Page 1]
-
-Internet-Draft Diameter Capabilities Update October 2010
-
-
-Table of Contents
-
- 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 3
- 2. Specification of Requirements . . . . . . . . . . . . . . . . . 3
- 3. Diameter Protocol Considerations . . . . . . . . . . . . . . . 3
- 4. Capabilities Update . . . . . . . . . . . . . . . . . . . . . . 3
- 4.1. Command-Code Values . . . . . . . . . . . . . . . . . . . . 4
- 4.1.1. Capabilities-Update-Request . . . . . . . . . . . . . . 5
- 4.1.2. Capabilities-Update-Answer . . . . . . . . . . . . . . 5
- 5. Security Considerations . . . . . . . . . . . . . . . . . . . . 6
- 6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . . 6
- 6.1. Application Identifier . . . . . . . . . . . . . . . . . . 6
- 6.2. Command Codes . . . . . . . . . . . . . . . . . . . . . . . 6
- 7. Contributors . . . . . . . . . . . . . . . . . . . . . . . . . 6
- 8. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 6
- 9. References . . . . . . . . . . . . . . . . . . . . . . . . . . 6
- 9.1. Normative References . . . . . . . . . . . . . . . . . . . 6
- 9.2. Informative References . . . . . . . . . . . . . . . . . . 7
- Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . . 7
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-Jiao & Zorn Expires April 27, 2011 [Page 2]
-
-Internet-Draft Diameter Capabilities Update October 2010
-
-
-1. Introduction
-
- Capabilities exchange is an important component of the Diameter Base
- Protocol [I-D.ietf-dime-rfc3588bis], allowing peers to exchange
- identities and Diameter capabilities (protocol version number,
- supported Diameter applications, security mechanisms, etc.). As
- defined in RFC 3588, however, the capabilities exchange process takes
- place only once, at the inception of a transport connection between a
- given pair of peers. Therefore, if a peer's capabilities change (due
- to software update, for example), the existing connection(s) must be
- torn down (along with all of the associated user sessions) and
- restarted before the modified capabilities can be advertised.
-
- This document defines a new Diameter application intended to allow
- the dynamic update of a subset of Diameter peer capabilities over an
- existing connection. Because the Capabilities Update application
- specified herein operates over an existing transport connection,
- modification of certain capabilities is prohibited. Specifically,
- modifying the security mechanism in use is not allowed; if the
- security method used between a pair of peers is changed the affected
- connection MUST be restarted.
-
-
-2. Specification of Requirements
-
- The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT",
- "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this
- document are to be interpreted as described in RFC 2119 [RFC2119].
-
-
-3. Diameter Protocol Considerations
-
- This section details the relationship of the Diameter Capabilities
- Update application to the Diameter Base Protocol.
-
- This document specifies Diameter Application-ID <TBD1>. Diameter
- nodes conforming to this specification MUST advertise support by
- including the value <TBD1> in the Auth-Application-Id of the
- Capabilities-Exchange-Request (CER) and Capabilities-Exchange-Answer
- (CEA) commands [I-D.ietf-dime-rfc3588bis].
-
-
-4. Capabilities Update
-
- When the capabilities of a Diameter node conforming to this
- specification change, it MUST notify all of the nodes with which it
- has an open transport connection and which have also advertised
- support for the Capabilities Update application using the
-
-
-
-Jiao & Zorn Expires April 27, 2011 [Page 3]
-
-Internet-Draft Diameter Capabilities Update October 2010
-
-
- Capabilities-Update-Request (CUR) message (Section 4.1.1). This
- message allows the update of a peer's capabilities (supported
- Diameter applications, etc.).
-
- A Diameter node only issues a given command to those peers that have
- advertised support for the Diameter application that defines the
- command; a Diameter node must cache the supported applications in
- order to ensure that unrecognized commands and/or Attribute-Value
- Pairs (AVPs) are not unnecessarily sent to a peer.
-
- The receiver of the CUR MUST determine common applications by
- computing the intersection of its own set of supported Application Id
- against all of the application identifier AVPs (Auth-Application-Id,
- Acct-Application-Id and Vendor-Specific- Application-Id) present in
- the CUR. The value of the Vendor-Id AVP in the Vendor-Specific-
- Application-Id MUST NOT be used during computation.
-
- If the receiver of a CUR does not have any applications in common
- with the sender then it MUST return a Capabilities-Update-Answer
- (CUA) (Section 4.1.2) with the Result-Code AVP set to
- DIAMETER_NO_COMMON_APPLICATION [I-D.ietf-dime-rfc3588bis], and SHOULD
- disconnect the transport layer connection; however, if active
- sessions are using the connection, peers MAY delay disconnection
- until the sessions can be redirected or gracefully terminated. Note
- that receiving a CUA from a peer advertising itself as a Relay (see
- [I-D.ietf-dime-rfc3588bis], Section 2.4) MUST be interpreted as
- having common applications with the peer.
-
- As for CER/CEA messages, the CUR and CUA messages MUST NOT be
- proxied, redirected or relayed.
-
- Even though the CUR/CUA messages cannot be proxied, it is still
- possible for an upstream agent to receive a message for which there
- are no peers available to handle the application that corresponds to
- the Command-Code. This could happen if, for example, the peers are
- too busy or down. In such instances, the 'E' bit MUST be set in the
- answer message with the Result-Code AVP set to
- DIAMETER_UNABLE_TO_DELIVER to inform the downstream peer to take
- action (e.g., re-routing requests to an alternate peer).
-
-4.1. Command-Code Values
-
- This section defines Command-Code [I-D.ietf-dime-rfc3588bis] values
- that MUST be supported by all Diameter implementations conforming to
- this specification. The following Command Codes are defined (using
- modified ABNF [I-D.ietf-dime-rfc3588bis]) in this document:
- Capabilities-Update-Request (CUR, Section 4.1.1) and Capabilities-
- Update-Answer (CUA, Section 4.1.2).
-
-
-
-Jiao & Zorn Expires April 27, 2011 [Page 4]
-
-Internet-Draft Diameter Capabilities Update October 2010
-
-
-4.1.1. Capabilities-Update-Request
-
- The Capabilities-Update-Request (CUR), indicated by the Command-Code
- set to <CUCC> and the Command Flags' 'R' bit set, is sent to update
- local capabilities. Upon detection of a transport failure, this
- message MUST NOT be sent to an alternate peer.
-
- When Diameter is run over the Stream Control Transmission Protocol
- [RFC4960], which allows connections to span multiple interfaces and
- multiple IP addresses, the Capabilities-Update-Request message MUST
- contain one Host-IP-Address AVP for each potential IP address that
- may be locally used when transmitting Diameter messages.
-
- Message Format
-
- <CUR> ::= < Diameter Header: <CUCC>, REQ >
- { Origin-Host }
- { Origin-Realm }
- 1* { Host-IP-Address }
- { Vendor-Id }
- { Product-Name }
- [ Origin-State-Id ]
- * [ Supported-Vendor-Id ]
- * [ Auth-Application-Id ]
- * [ Acct-Application-Id ]
- * [ Vendor-Specific-Application-Id ]
- [ Firmware-Revision ]
- * [ AVP ]
-
-4.1.2. Capabilities-Update-Answer
-
- The Capabilities-Update-Answer, indicated by the Command-Code set to
- <CUCC> and the Command Flags' 'R' bit cleared, is sent in response to
- a CUR message.
-
- Message Format
-
- <CUA> ::= < Diameter Header: <CUCC> >
- { Origin-Host }
- { Origin-Realm }
- { Result-Code }
- [ Error-Message ]
- * [ AVP ]
-
-
-
-
-
-
-
-
-Jiao & Zorn Expires April 27, 2011 [Page 5]
-
-Internet-Draft Diameter Capabilities Update October 2010
-
-
-5. Security Considerations
-
- The security considerations applicable to the Diameter Base Protocol
- [I-D.ietf-dime-rfc3588bis] are also applicable to this document.
-
-
-6. IANA Considerations
-
- This section explains the criteria to be used by the IANA for
- assignment of numbers within namespaces used within this document.
-
-6.1. Application Identifier
-
- This specification assigns the value <TBD1> from the Application
- Identifiers namespace [I-D.ietf-dime-rfc3588bis]. See Section 3 for
- the assignment of the namespace in this specification.
-
-6.2. Command Codes
-
- This specification assigns the value <CUCC> from the Command Codes
- namespace [I-D.ietf-dime-rfc3588bis]. See Section 4.1 for the
- assignment of the namespace in this specification.
-
-
-7. Contributors
-
- This document is based upon work done by Tina Tsou.
-
-
-8. Acknowledgements
-
- Thanks to Sebastien Decugis, Niklas Neumann, Subash Comerica, Lionel
- Morand, Dan Romascanu, Dan Harkins and Ravi for helpful review and
- discussion.
-
-
-9. References
-
-9.1. Normative References
-
- [I-D.ietf-dime-rfc3588bis]
- Fajardo, V., Arkko, J., Loughney, J., and G. Zorn,
- "Diameter Base Protocol", draft-ietf-dime-rfc3588bis-25
- (work in progress), September 2010.
-
- [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate
- Requirement Levels", BCP 14, RFC 2119, March 1997.
-
-
-
-
-Jiao & Zorn Expires April 27, 2011 [Page 6]
-
-Internet-Draft Diameter Capabilities Update October 2010
-
-
-9.2. Informative References
-
- [RFC4960] Stewart, R., "Stream Control Transmission Protocol",
- RFC 4960, September 2007.
-
-
-Authors' Addresses
-
- Jiao Kang
- Huawei Technologies
- Section B1, Huawei Industrial Base
- Bantian, Longgang District
- Shenzhen 518129
- P.R. China
-
- Phone: +86 755 2878-6690
- Email: [email protected]
-
-
- Glen Zorn
- Network Zen
- 227/358 Thanon Sanphawut
- Bang Na, Bangkok 10260
- Thailand
-
- Phone: +66 (0) 87-040-4617
- Email: [email protected]
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-Jiao & Zorn Expires April 27, 2011 [Page 7]
-
diff --git a/lib/diameter/doc/standard/draft-ietf-dime-rfc3588bis-26.txt b/lib/diameter/doc/standard/rfc6733.txt index 87b9562f93..2f5a477347 100644 --- a/lib/diameter/doc/standard/draft-ietf-dime-rfc3588bis-26.txt +++ b/lib/diameter/doc/standard/rfc6733.txt @@ -1,62 +1,72 @@ -DIME V. Fajardo, Ed. -Internet-Draft Telcordia Technologies -Obsoletes: 3588 (if approved) J. Arkko -Intended status: Standards Track Ericsson Research -Expires: July 24, 2011 J. Loughney + + + +Internet Engineering Task Force (IETF) V. Fajardo, Ed. +Request for Comments: 6733 Telcordia Technologies +Obsoletes: 3588, 5719 J. Arkko +Category: Standards Track Ericsson Research +ISSN: 2070-1721 J. Loughney Nokia Research Center - G. Zorn + G. Zorn, Ed. Network Zen - January 20, 2011 + October 2012 Diameter Base Protocol - draft-ietf-dime-rfc3588bis-26.txt Abstract The Diameter base protocol is intended to provide an Authentication, - Authorization and Accounting (AAA) framework for applications such as - network access or IP mobility in both local and roaming situations. - This document specifies the message format, transport, error - reporting, accounting and security services used by all Diameter - applications. The Diameter base protocol as defined in this document - must be supported by all Diameter implementations. + Authorization, and Accounting (AAA) framework for applications such + as network access or IP mobility in both local and roaming + situations. This document specifies the message format, transport, + error reporting, accounting, and security services used by all + Diameter applications. The Diameter base protocol as defined in this + document obsoletes RFC 3588 and RFC 5719, and it must be supported by + all new Diameter implementations. -Status of this Memo +Status of This Memo - This Internet-Draft is submitted in full conformance with the - provisions of BCP 78 and BCP 79. + This is an Internet Standards Track document. - Internet-Drafts are working documents of the Internet Engineering - Task Force (IETF). Note that other groups may also distribute - working documents as Internet-Drafts. The list of current Internet- - Drafts is at http://datatracker.ietf.org/drafts/current/. + This document is a product of the Internet Engineering Task Force + (IETF). It represents the consensus of the IETF community. It has + received public review and has been approved for publication by the + Internet Engineering Steering Group (IESG). Further information on + Internet Standards is available in Section 2 of RFC 5741. + + Information about the current status of this document, any errata, + and how to provide feedback on it may be obtained at + http://www.rfc-editor.org/info/rfc6733. - Internet-Drafts are draft documents valid for a maximum of six months - and may be updated, replaced, or obsoleted by other documents at any - time. It is inappropriate to use Internet-Drafts as reference - material or to cite them other than as "work in progress." - This Internet-Draft will expire on July 24, 2011. -Copyright Notice - Copyright (c) 2011 IETF Trust and the persons identified as the - document authors. All rights reserved. - This document is subject to BCP 78 and the IETF Trust's Legal - Provisions Relating to IETF Documents -Fajardo, et al. Expires July 24, 2011 [Page 1] + + + + + + +Fajardo, et al. Standards Track [Page 1] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 +Copyright Notice + + Copyright (c) 2012 IETF Trust and the persons identified as the + document authors. All rights reserved. + + This document is subject to BCP 78 and the IETF Trust's Legal + Provisions Relating to IETF Documents (http://trustee.ietf.org/license-info) in effect on the date of publication of this document. Please review these documents carefully, as they describe your rights and restrictions with respect @@ -65,256 +75,303 @@ Internet-Draft Diameter Base Protocol January 2011 the Trust Legal Provisions and are provided without warranty as described in the Simplified BSD License. + This document may contain material from IETF Documents or IETF + Contributions published or made publicly available before November + 10, 2008. The person(s) controlling the copyright in some of this + material may not have granted the IETF Trust the right to allow + modifications of such material outside the IETF Standards Process. + Without obtaining an adequate license from the person(s) controlling + the copyright in such materials, this document may not be modified + outside the IETF Standards Process, and derivative works of it may + not be created outside the IETF Standards Process, except to format + it for publication as an RFC or to translate it into languages other + than English. Table of Contents - 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . 6 - 1.1. Diameter Protocol . . . . . . . . . . . . . . . . . . . . 8 - 1.1.1. Description of the Document Set . . . . . . . . . . . 9 - 1.1.2. Conventions Used in This Document . . . . . . . . . . 10 - 1.1.3. Changes from RFC3588 . . . . . . . . . . . . . . . . 10 - 1.2. Terminology . . . . . . . . . . . . . . . . . . . . . . . 12 - 1.3. Approach to Extensibility . . . . . . . . . . . . . . . . 17 - 1.3.1. Defining New AVP Values . . . . . . . . . . . . . . . 18 - 1.3.2. Creating New AVPs . . . . . . . . . . . . . . . . . . 18 - 1.3.3. Creating New Commands . . . . . . . . . . . . . . . . 18 - 1.3.4. Creating New Diameter Applications . . . . . . . . . 19 - 2. Protocol Overview . . . . . . . . . . . . . . . . . . . . . . 21 - 2.1. Transport . . . . . . . . . . . . . . . . . . . . . . . . 22 - 2.1.1. SCTP Guidelines . . . . . . . . . . . . . . . . . . . 23 - 2.2. Securing Diameter Messages . . . . . . . . . . . . . . . 24 - 2.3. Diameter Application Compliance . . . . . . . . . . . . . 24 - 2.4. Application Identifiers . . . . . . . . . . . . . . . . . 24 - 2.5. Connections vs. Sessions . . . . . . . . . . . . . . . . 25 - 2.6. Peer Table . . . . . . . . . . . . . . . . . . . . . . . 26 - 2.7. Routing Table . . . . . . . . . . . . . . . . . . . . . . 27 - 2.8. Role of Diameter Agents . . . . . . . . . . . . . . . . . 28 - 2.8.1. Relay Agents . . . . . . . . . . . . . . . . . . . . 29 - 2.8.2. Proxy Agents . . . . . . . . . . . . . . . . . . . . 30 - 2.8.3. Redirect Agents . . . . . . . . . . . . . . . . . . . 31 - 2.8.4. Translation Agents . . . . . . . . . . . . . . . . . 32 - 2.9. Diameter Path Authorization . . . . . . . . . . . . . . . 33 - 3. Diameter Header . . . . . . . . . . . . . . . . . . . . . . . 35 - 3.1. Command Codes . . . . . . . . . . . . . . . . . . . . . . 38 - 3.2. Command Code ABNF specification . . . . . . . . . . . . . 38 - 3.3. Diameter Command Naming Conventions . . . . . . . . . . . 41 - 4. Diameter AVPs . . . . . . . . . . . . . . . . . . . . . . . . 42 - 4.1. AVP Header . . . . . . . . . . . . . . . . . . . . . . . 42 - 4.1.1. Optional Header Elements . . . . . . . . . . . . . . 43 - 4.2. Basic AVP Data Formats . . . . . . . . . . . . . . . . . 44 - 4.3. Derived AVP Data Formats . . . . . . . . . . . . . . . . 45 - 4.3.1. Common Derived AVPs . . . . . . . . . . . . . . . . . 45 - 4.4. Grouped AVP Values . . . . . . . . . . . . . . . . . . . 52 - - - -Fajardo, et al. Expires July 24, 2011 [Page 2] - -Internet-Draft Diameter Base Protocol January 2011 - - - 4.4.1. Example AVP with a Grouped Data type . . . . . . . . 53 - 4.5. Diameter Base Protocol AVPs . . . . . . . . . . . . . . . 56 - 5. Diameter Peers . . . . . . . . . . . . . . . . . . . . . . . 59 - 5.1. Peer Connections . . . . . . . . . . . . . . . . . . . . 59 - 5.2. Diameter Peer Discovery . . . . . . . . . . . . . . . . . 60 - 5.3. Capabilities Exchange . . . . . . . . . . . . . . . . . . 61 - 5.3.1. Capabilities-Exchange-Request . . . . . . . . . . . . 63 - 5.3.2. Capabilities-Exchange-Answer . . . . . . . . . . . . 63 - 5.3.3. Vendor-Id AVP . . . . . . . . . . . . . . . . . . . . 64 - 5.3.4. Firmware-Revision AVP . . . . . . . . . . . . . . . . 64 - 5.3.5. Host-IP-Address AVP . . . . . . . . . . . . . . . . . 64 - 5.3.6. Supported-Vendor-Id AVP . . . . . . . . . . . . . . . 65 - 5.3.7. Product-Name AVP . . . . . . . . . . . . . . . . . . 65 - 5.4. Disconnecting Peer connections . . . . . . . . . . . . . 65 - 5.4.1. Disconnect-Peer-Request . . . . . . . . . . . . . . . 66 - 5.4.2. Disconnect-Peer-Answer . . . . . . . . . . . . . . . 66 - 5.4.3. Disconnect-Cause AVP . . . . . . . . . . . . . . . . 66 - 5.5. Transport Failure Detection . . . . . . . . . . . . . . . 67 - 5.5.1. Device-Watchdog-Request . . . . . . . . . . . . . . . 67 - 5.5.2. Device-Watchdog-Answer . . . . . . . . . . . . . . . 67 - 5.5.3. Transport Failure Algorithm . . . . . . . . . . . . . 68 - 5.5.4. Failover and Failback Procedures . . . . . . . . . . 68 - 5.6. Peer State Machine . . . . . . . . . . . . . . . . . . . 69 - 5.6.1. Incoming connections . . . . . . . . . . . . . . . . 71 - 5.6.2. Events . . . . . . . . . . . . . . . . . . . . . . . 72 - 5.6.3. Actions . . . . . . . . . . . . . . . . . . . . . . . 73 - 5.6.4. The Election Process . . . . . . . . . . . . . . . . 75 - 6. Diameter message processing . . . . . . . . . . . . . . . . . 76 - 6.1. Diameter Request Routing Overview . . . . . . . . . . . . 76 - 6.1.1. Originating a Request . . . . . . . . . . . . . . . . 77 - 6.1.2. Sending a Request . . . . . . . . . . . . . . . . . . 77 - 6.1.3. Receiving Requests . . . . . . . . . . . . . . . . . 78 - 6.1.4. Processing Local Requests . . . . . . . . . . . . . . 78 - 6.1.5. Request Forwarding . . . . . . . . . . . . . . . . . 78 - 6.1.6. Request Routing . . . . . . . . . . . . . . . . . . . 78 - 6.1.7. Predictive Loop Avoidance . . . . . . . . . . . . . . 79 - 6.1.8. Redirecting Requests . . . . . . . . . . . . . . . . 79 - 6.1.9. Relaying and Proxying Requests . . . . . . . . . . . 80 - 6.2. Diameter Answer Processing . . . . . . . . . . . . . . . 82 - 6.2.1. Processing received Answers . . . . . . . . . . . . . 82 - 6.2.2. Relaying and Proxying Answers . . . . . . . . . . . . 82 - 6.3. Origin-Host AVP . . . . . . . . . . . . . . . . . . . . . 83 - 6.4. Origin-Realm AVP . . . . . . . . . . . . . . . . . . . . 83 - 6.5. Destination-Host AVP . . . . . . . . . . . . . . . . . . 83 - 6.6. Destination-Realm AVP . . . . . . . . . . . . . . . . . . 84 - 6.7. Routing AVPs . . . . . . . . . . . . . . . . . . . . . . 84 - 6.7.1. Route-Record AVP . . . . . . . . . . . . . . . . . . 84 - 6.7.2. Proxy-Info AVP . . . . . . . . . . . . . . . . . . . 84 - - - -Fajardo, et al. Expires July 24, 2011 [Page 3] - -Internet-Draft Diameter Base Protocol January 2011 - - - 6.7.3. Proxy-Host AVP . . . . . . . . . . . . . . . . . . . 85 - 6.7.4. Proxy-State AVP . . . . . . . . . . . . . . . . . . . 85 - 6.8. Auth-Application-Id AVP . . . . . . . . . . . . . . . . . 85 - 6.9. Acct-Application-Id AVP . . . . . . . . . . . . . . . . . 85 - 6.10. Inband-Security-Id AVP . . . . . . . . . . . . . . . . . 85 - 6.11. Vendor-Specific-Application-Id AVP . . . . . . . . . . . 86 - 6.12. Redirect-Host AVP . . . . . . . . . . . . . . . . . . . . 87 - 6.13. Redirect-Host-Usage AVP . . . . . . . . . . . . . . . . . 87 - 6.14. Redirect-Max-Cache-Time AVP . . . . . . . . . . . . . . . 88 - 7. Error Handling . . . . . . . . . . . . . . . . . . . . . . . 90 - 7.1. Result-Code AVP . . . . . . . . . . . . . . . . . . . . . 92 - 7.1.1. Informational . . . . . . . . . . . . . . . . . . . . 92 - 7.1.2. Success . . . . . . . . . . . . . . . . . . . . . . . 93 - 7.1.3. Protocol Errors . . . . . . . . . . . . . . . . . . . 93 - 7.1.4. Transient Failures . . . . . . . . . . . . . . . . . 94 - 7.1.5. Permanent Failures . . . . . . . . . . . . . . . . . 95 - 7.2. Error Bit . . . . . . . . . . . . . . . . . . . . . . . . 98 - 7.3. Error-Message AVP . . . . . . . . . . . . . . . . . . . . 99 - 7.4. Error-Reporting-Host AVP . . . . . . . . . . . . . . . . 99 - 7.5. Failed-AVP AVP . . . . . . . . . . . . . . . . . . . . . 99 - 7.6. Experimental-Result AVP . . . . . . . . . . . . . . . . . 100 - 7.7. Experimental-Result-Code AVP . . . . . . . . . . . . . . 100 - 8. Diameter User Sessions . . . . . . . . . . . . . . . . . . . 101 - 8.1. Authorization Session State Machine . . . . . . . . . . . 102 - 8.2. Accounting Session State Machine . . . . . . . . . . . . 107 - 8.3. Server-Initiated Re-Auth . . . . . . . . . . . . . . . . 112 - 8.3.1. Re-Auth-Request . . . . . . . . . . . . . . . . . . . 112 - 8.3.2. Re-Auth-Answer . . . . . . . . . . . . . . . . . . . 113 - 8.4. Session Termination . . . . . . . . . . . . . . . . . . . 114 - 8.4.1. Session-Termination-Request . . . . . . . . . . . . . 115 - 8.4.2. Session-Termination-Answer . . . . . . . . . . . . . 115 - 8.5. Aborting a Session . . . . . . . . . . . . . . . . . . . 116 - 8.5.1. Abort-Session-Request . . . . . . . . . . . . . . . . 116 - 8.5.2. Abort-Session-Answer . . . . . . . . . . . . . . . . 117 - 8.6. Inferring Session Termination from Origin-State-Id . . . 118 - 8.7. Auth-Request-Type AVP . . . . . . . . . . . . . . . . . . 118 - 8.8. Session-Id AVP . . . . . . . . . . . . . . . . . . . . . 119 - 8.9. Authorization-Lifetime AVP . . . . . . . . . . . . . . . 120 - 8.10. Auth-Grace-Period AVP . . . . . . . . . . . . . . . . . . 121 - 8.11. Auth-Session-State AVP . . . . . . . . . . . . . . . . . 121 - 8.12. Re-Auth-Request-Type AVP . . . . . . . . . . . . . . . . 121 - 8.13. Session-Timeout AVP . . . . . . . . . . . . . . . . . . . 122 - 8.14. User-Name AVP . . . . . . . . . . . . . . . . . . . . . . 122 - 8.15. Termination-Cause AVP . . . . . . . . . . . . . . . . . . 122 - 8.16. Origin-State-Id AVP . . . . . . . . . . . . . . . . . . . 124 - 8.17. Session-Binding AVP . . . . . . . . . . . . . . . . . . . 124 - 8.18. Session-Server-Failover AVP . . . . . . . . . . . . . . . 125 - 8.19. Multi-Round-Time-Out AVP . . . . . . . . . . . . . . . . 126 - - - -Fajardo, et al. Expires July 24, 2011 [Page 4] - -Internet-Draft Diameter Base Protocol January 2011 - - - 8.20. Class AVP . . . . . . . . . . . . . . . . . . . . . . . . 126 - 8.21. Event-Timestamp AVP . . . . . . . . . . . . . . . . . . . 126 - 9. Accounting . . . . . . . . . . . . . . . . . . . . . . . . . 127 - 9.1. Server Directed Model . . . . . . . . . . . . . . . . . . 127 - 9.2. Protocol Messages . . . . . . . . . . . . . . . . . . . . 128 - 9.3. Accounting Application Extension and Requirements . . . . 128 - 9.4. Fault Resilience . . . . . . . . . . . . . . . . . . . . 129 - 9.5. Accounting Records . . . . . . . . . . . . . . . . . . . 129 - 9.6. Correlation of Accounting Records . . . . . . . . . . . . 130 - 9.7. Accounting Command-Codes . . . . . . . . . . . . . . . . 131 - 9.7.1. Accounting-Request . . . . . . . . . . . . . . . . . 131 - 9.7.2. Accounting-Answer . . . . . . . . . . . . . . . . . . 132 - 9.8. Accounting AVPs . . . . . . . . . . . . . . . . . . . . . 133 - 9.8.1. Accounting-Record-Type AVP . . . . . . . . . . . . . 133 - 9.8.2. Acct-Interim-Interval AVP . . . . . . . . . . . . . . 134 - 9.8.3. Accounting-Record-Number AVP . . . . . . . . . . . . 135 - 9.8.4. Acct-Session-Id AVP . . . . . . . . . . . . . . . . . 135 - 9.8.5. Acct-Multi-Session-Id AVP . . . . . . . . . . . . . . 135 - 9.8.6. Accounting-Sub-Session-Id AVP . . . . . . . . . . . . 135 - 9.8.7. Accounting-Realtime-Required AVP . . . . . . . . . . 136 - 10. AVP Occurrence Table . . . . . . . . . . . . . . . . . . . . 137 - 10.1. Base Protocol Command AVP Table . . . . . . . . . . . . . 137 - 10.2. Accounting AVP Table . . . . . . . . . . . . . . . . . . 138 - 11. IANA Considerations . . . . . . . . . . . . . . . . . . . . . 140 - 11.1. Changes to AVP Header Allocation . . . . . . . . . . . . 140 - 11.2. Diameter Header . . . . . . . . . . . . . . . . . . . . . 140 - 11.3. AVP Values . . . . . . . . . . . . . . . . . . . . . . . 140 - 11.3.1. Experimental-Result-Code AVP . . . . . . . . . . . . 140 - 11.4. Diameter TCP, SCTP, TLS/TCP and DTLS/SCTP Port Numbers . 141 - 11.5. S-NAPTR Parameters . . . . . . . . . . . . . . . . . . . 141 - 12. Diameter protocol related configurable parameters . . . . . . 142 - 13. Security Considerations . . . . . . . . . . . . . . . . . . . 143 - 13.1. TLS/TCP and DTLS/SCTP Usage . . . . . . . . . . . . . . . 143 - 13.2. Peer-to-Peer Considerations . . . . . . . . . . . . . . . 144 - 14. References . . . . . . . . . . . . . . . . . . . . . . . . . 145 - 14.1. Normative References . . . . . . . . . . . . . . . . . . 145 - 14.2. Informational References . . . . . . . . . . . . . . . . 147 - Appendix A. Acknowledgements . . . . . . . . . . . . . . . . . . 149 - A.1. RFC3588bis . . . . . . . . . . . . . . . . . . . . . . . 149 - A.2. RFC3588 . . . . . . . . . . . . . . . . . . . . . . . . . 150 - Appendix B. S-NAPTR Example . . . . . . . . . . . . . . . . . . 151 - Appendix C. Duplicate Detection . . . . . . . . . . . . . . . . 152 - Appendix D. Internationalized Domain Names . . . . . . . . . . . 154 - Authors' Addresses . . . . . . . . . . . . . . . . . . . . . . . 155 - - - - - - - -Fajardo, et al. Expires July 24, 2011 [Page 5] - -Internet-Draft Diameter Base Protocol January 2011 + 1. Introduction ....................................................7 + 1.1. Diameter Protocol ..........................................9 + 1.1.1. Description of the Document Set ....................10 + 1.1.2. Conventions Used in This Document ..................11 + 1.1.3. Changes from RFC 3588 ..............................11 + 1.2. Terminology ...............................................12 + 1.3. Approach to Extensibility .................................17 + 1.3.1. Defining New AVP Values ............................18 + 1.3.2. Creating New AVPs ..................................18 + 1.3.3. Creating New Commands ..............................18 + 1.3.4. Creating New Diameter Applications .................19 + 2. Protocol Overview ..............................................20 + 2.1. Transport .................................................22 + 2.1.1. SCTP Guidelines ....................................23 + 2.2. Securing Diameter Messages ................................24 + 2.3. Diameter Application Compliance ...........................24 + 2.4. Application Identifiers ...................................24 + 2.5. Connections vs. Sessions ..................................25 + 2.6. Peer Table ................................................26 + + + +Fajardo, et al. Standards Track [Page 2] + +RFC 6733 Diameter Base Protocol October 2012 + + + 2.7. Routing Table .............................................27 + 2.8. Role of Diameter Agents ...................................28 + 2.8.1. Relay Agents .......................................30 + 2.8.2. Proxy Agents .......................................31 + 2.8.3. Redirect Agents ....................................31 + 2.8.4. Translation Agents .................................32 + 2.9. Diameter Path Authorization ...............................33 + 3. Diameter Header ................................................34 + 3.1. Command Codes .............................................37 + 3.2. Command Code Format Specification .........................38 + 3.3. Diameter Command Naming Conventions .......................40 + 4. Diameter AVPs ..................................................40 + 4.1. AVP Header ................................................41 + 4.1.1. Optional Header Elements ...........................42 + 4.2. Basic AVP Data Formats ....................................43 + 4.3. Derived AVP Data Formats ..................................44 + 4.3.1. Common Derived AVP Data Formats ....................44 + 4.4. Grouped AVP Values ........................................51 + 4.4.1. Example AVP with a Grouped Data Type ...............52 + 4.5. Diameter Base Protocol AVPs ...............................55 + 5. Diameter Peers .................................................58 + 5.1. Peer Connections ..........................................58 + 5.2. Diameter Peer Discovery ...................................59 + 5.3. Capabilities Exchange .....................................60 + 5.3.1. Capabilities-Exchange-Request ......................62 + 5.3.2. Capabilities-Exchange-Answer .......................63 + 5.3.3. Vendor-Id AVP ......................................63 + 5.3.4. Firmware-Revision AVP ..............................64 + 5.3.5. Host-IP-Address AVP ................................64 + 5.3.6. Supported-Vendor-Id AVP ............................64 + 5.3.7. Product-Name AVP ...................................64 + 5.4. Disconnecting Peer Connections ............................64 + 5.4.1. Disconnect-Peer-Request ............................65 + 5.4.2. Disconnect-Peer-Answer .............................65 + 5.4.3. Disconnect-Cause AVP ...............................66 + 5.5. Transport Failure Detection ...............................66 + 5.5.1. Device-Watchdog-Request ............................67 + 5.5.2. Device-Watchdog-Answer .............................67 + 5.5.3. Transport Failure Algorithm ........................67 + 5.5.4. Failover and Failback Procedures ...................67 + 5.6. Peer State Machine ........................................68 + 5.6.1. Incoming Connections ...............................71 + 5.6.2. Events .............................................71 + 5.6.3. Actions ............................................72 + 5.6.4. The Election Process ...............................74 + + + + + + +Fajardo, et al. Standards Track [Page 3] + +RFC 6733 Diameter Base Protocol October 2012 + + + 6. Diameter Message Processing ....................................74 + 6.1. Diameter Request Routing Overview .........................74 + 6.1.1. Originating a Request ..............................75 + 6.1.2. Sending a Request ..................................76 + 6.1.3. Receiving Requests .................................76 + 6.1.4. Processing Local Requests ..........................76 + 6.1.5. Request Forwarding .................................77 + 6.1.6. Request Routing ....................................77 + 6.1.7. Predictive Loop Avoidance ..........................77 + 6.1.8. Redirecting Requests ...............................78 + 6.1.9. Relaying and Proxying Requests .....................79 + 6.2. Diameter Answer Processing ................................80 + 6.2.1. Processing Received Answers ........................81 + 6.2.2. Relaying and Proxying Answers ......................81 + 6.3. Origin-Host AVP ...........................................81 + 6.4. Origin-Realm AVP ..........................................82 + 6.5. Destination-Host AVP ......................................82 + 6.6. Destination-Realm AVP .....................................82 + 6.7. Routing AVPs ..............................................83 + 6.7.1. Route-Record AVP ...................................83 + 6.7.2. Proxy-Info AVP .....................................83 + 6.7.3. Proxy-Host AVP .....................................83 + 6.7.4. Proxy-State AVP ....................................83 + 6.8. Auth-Application-Id AVP ...................................83 + 6.9. Acct-Application-Id AVP ...................................84 + 6.10. Inband-Security-Id AVP ...................................84 + 6.11. Vendor-Specific-Application-Id AVP .......................84 + 6.12. Redirect-Host AVP ........................................85 + 6.13. Redirect-Host-Usage AVP ..................................85 + 6.14. Redirect-Max-Cache-Time AVP ..............................87 + 7. Error Handling .................................................87 + 7.1. Result-Code AVP ...........................................89 + 7.1.1. Informational ......................................90 + 7.1.2. Success ............................................90 + 7.1.3. Protocol Errors ....................................90 + 7.1.4. Transient Failures .................................92 + 7.1.5. Permanent Failures .................................92 + 7.2. Error Bit .................................................95 + 7.3. Error-Message AVP .........................................96 + 7.4. Error-Reporting-Host AVP ..................................96 + 7.5. Failed-AVP AVP ............................................96 + 7.6. Experimental-Result AVP ...................................97 + 7.7. Experimental-Result-Code AVP ..............................97 + 8. Diameter User Sessions .........................................98 + 8.1. Authorization Session State Machine .......................99 + 8.2. Accounting Session State Machine .........................104 + + + + + +Fajardo, et al. Standards Track [Page 4] + +RFC 6733 Diameter Base Protocol October 2012 + + + 8.3. Server-Initiated Re-Auth .................................110 + 8.3.1. Re-Auth-Request ...................................110 + 8.3.2. Re-Auth-Answer ....................................110 + 8.4. Session Termination ......................................111 + 8.4.1. Session-Termination-Request .......................112 + 8.4.2. Session-Termination-Answer ........................113 + 8.5. Aborting a Session .......................................113 + 8.5.1. Abort-Session-Request .............................114 + 8.5.2. Abort-Session-Answer ..............................114 + 8.6. Inferring Session Termination from Origin-State-Id .......115 + 8.7. Auth-Request-Type AVP ....................................116 + 8.8. Session-Id AVP ...........................................116 + 8.9. Authorization-Lifetime AVP ...............................117 + 8.10. Auth-Grace-Period AVP ...................................118 + 8.11. Auth-Session-State AVP ..................................118 + 8.12. Re-Auth-Request-Type AVP ................................118 + 8.13. Session-Timeout AVP .....................................119 + 8.14. User-Name AVP ...........................................119 + 8.15. Termination-Cause AVP ...................................120 + 8.16. Origin-State-Id AVP .....................................120 + 8.17. Session-Binding AVP .....................................120 + 8.18. Session-Server-Failover AVP .............................121 + 8.19. Multi-Round-Time-Out AVP ................................122 + 8.20. Class AVP ...............................................122 + 8.21. Event-Timestamp AVP .....................................122 + 9. Accounting ....................................................123 + 9.1. Server Directed Model ....................................123 + 9.2. Protocol Messages ........................................124 + 9.3. Accounting Application Extension and Requirements ........124 + 9.4. Fault Resilience .........................................125 + 9.5. Accounting Records .......................................125 + 9.6. Correlation of Accounting Records ........................126 + 9.7. Accounting Command Codes .................................127 + 9.7.1. Accounting-Request ................................127 + 9.7.2. Accounting-Answer .................................128 + 9.8. Accounting AVPs ..........................................129 + 9.8.1. Accounting-Record-Type AVP ........................129 + 9.8.2. Acct-Interim-Interval AVP .........................130 + 9.8.3. Accounting-Record-Number AVP ......................131 + 9.8.4. Acct-Session-Id AVP ...............................131 + 9.8.5. Acct-Multi-Session-Id AVP .........................131 + 9.8.6. Accounting-Sub-Session-Id AVP .....................131 + 9.8.7. Accounting-Realtime-Required AVP ..................132 + 10. AVP Occurrence Tables ........................................132 + 10.1. Base Protocol Command AVP Table .........................133 + 10.2. Accounting AVP Table ....................................134 + + + + + +Fajardo, et al. Standards Track [Page 5] + +RFC 6733 Diameter Base Protocol October 2012 + + + 11. IANA Considerations ..........................................135 + 11.1. AVP Header ..............................................135 + 11.1.1. AVP Codes ........................................136 + 11.1.2. AVP Flags ........................................136 + 11.2. Diameter Header .........................................136 + 11.2.1. Command Codes ....................................136 + 11.2.2. Command Flags ....................................137 + 11.3. AVP Values ..............................................137 + 11.3.1. Experimental-Result-Code AVP .....................137 + 11.3.2. Result-Code AVP Values ...........................137 + 11.3.3. Accounting-Record-Type AVP Values ................137 + 11.3.4. Termination-Cause AVP Values .....................137 + 11.3.5. Redirect-Host-Usage AVP Values ...................137 + 11.3.6. Session-Server-Failover AVP Values ...............137 + 11.3.7. Session-Binding AVP Values .......................137 + 11.3.8. Disconnect-Cause AVP Values ......................138 + 11.3.9. Auth-Request-Type AVP Values .....................138 + 11.3.10. Auth-Session-State AVP Values ...................138 + 11.3.11. Re-Auth-Request-Type AVP Values .................138 + 11.3.12. Accounting-Realtime-Required AVP Values .........138 + 11.3.13. Inband-Security-Id AVP (code 299) ...............138 + 11.4. _diameters Service Name and Port Number Registration ....138 + 11.5. SCTP Payload Protocol Identifiers .......................139 + 11.6. S-NAPTR Parameters ......................................139 + 12. Diameter Protocol-Related Configurable Parameters ............139 + 13. Security Considerations ......................................140 + 13.1. TLS/TCP and DTLS/SCTP Usage .............................140 + 13.2. Peer-to-Peer Considerations .............................141 + 13.3. AVP Considerations ......................................141 + 14. References ...................................................142 + 14.1. Normative References ....................................142 + 14.2. Informative References ..................................144 + Appendix A. Acknowledgements .....................................147 + A.1. This Document .............................................147 + A.2. RFC 3588 ..................................................148 + Appendix B. S-NAPTR Example ......................................148 + Appendix C. Duplicate Detection ..................................149 + Appendix D. Internationalized Domain Names .......................151 + + + + + + + + + + + + + +Fajardo, et al. Standards Track [Page 6] + +RFC 6733 Diameter Base Protocol October 2012 1. Introduction - Authentication, Authorization and Accounting (AAA) protocols such as + Authentication, Authorization, and Accounting (AAA) protocols such as TACACS [RFC1492] and RADIUS [RFC2865] were initially deployed to provide dial-up PPP [RFC1661] and terminal server access. Over time, AAA support was needed on many new access technologies, the scale and complexity of AAA networks grew, and AAA was also used on new - applications (such as voice over IP). This lead to new demands on - AAA protocols. + applications (such as voice over IP). This led to new demands on AAA + protocols. Network access requirements for AAA protocols are summarized in - [RFC2989]. These include: - + Aboba, et al. [RFC2989]. These include: Failover - [RFC2865] does not define failover mechanisms, and as a result, + [RFC2865] does not define failover mechanisms and, as a result, failover behavior differs between implementations. In order to provide well-defined failover behavior, Diameter supports - application-layer acknowledgements, and defines failover - algorithms and the associated state machine. This is described in - Section 5.5 and [RFC3539]. + application-layer acknowledgements and defines failover algorithms + and the associated state machine. Transmission-level security - [RFC2865] defines an application-layer authentication and - integrity scheme that is required only for use with Response + RADIUS [RFC2865] defines an application-layer authentication and + integrity scheme that is required only for use with response packets. While [RFC2869] defines an additional authentication and integrity mechanism, use is only required during Extensible - Authentication Protocol (EAP) sessions. While attribute-hiding is - supported, [RFC2865] does not provide support for per-packet - confidentiality. In accounting, [RFC2866] assumes that replay - protection is provided by the backend billing server, rather than - within the protocol itself. + Authentication Protocol (EAP) [RFC3748] sessions. While attribute + hiding is supported, [RFC2865] does not provide support for per- + packet confidentiality. In accounting, [RFC2866] assumes that + replay protection is provided by the backend billing server rather + than within the protocol itself. While [RFC3162] defines the use of IPsec with RADIUS, support for IPsec is not required. In order to provide universal support for @@ -322,50 +379,48 @@ Internet-Draft Diameter Base Protocol January 2011 domain AAA deployments, Diameter provides support for TLS/TCP and DTLS/SCTP. Security is discussed in Section 13. - Reliable transport - RADIUS runs over UDP, and does not define retransmission behavior; as a result, reliability varies between implementations. As described in [RFC2975], this is a major issue in accounting, where + packet loss may translate directly into revenue loss. In order to -Fajardo, et al. Expires July 24, 2011 [Page 6] - -Internet-Draft Diameter Base Protocol January 2011 - packet loss may translate directly into revenue loss. In order to - provide well defined transport behavior, Diameter runs over - reliable transport mechanisms (TCP, SCTP) as defined in [RFC3539]. +Fajardo, et al. Standards Track [Page 7] + +RFC 6733 Diameter Base Protocol October 2012 - Agent support - [RFC2865] does not provide for explicit support for agents, - including Proxies, Redirects and Relays. Since the expected - behavior is not defined, it varies between implementations. - Diameter defines agent behavior explicitly; this is described in - Section 2.8. + provide well-defined transport behavior, Diameter runs over + reliable transport mechanisms (TCP, Stream Control Transmission + Protocol (SCTP)) as defined in [RFC3539]. + + Agent support + RADIUS does not provide for explicit support for agents, including + proxies, redirects, and relays. Since the expected behavior is + not defined, it varies between implementations. Diameter defines + agent behavior explicitly; this is described in Section 2.8. Server-initiated messages - While RADIUS server-initiated messages are defined in [RFC5176], + While server-initiated messages are defined in RADIUS [RFC5176], support is optional. This makes it difficult to implement features such as unsolicited disconnect or re-authentication/ re-authorization on demand across a heterogeneous deployment. To - tackle this issue, support for server-initiated messages is + address this issue, support for server-initiated messages is mandatory in Diameter. - Transition support While Diameter does not share a common protocol data unit (PDU) with RADIUS, considerable effort has been expended in enabling - backward compatibility with RADIUS, so that the two protocols may + backward compatibility with RADIUS so that the two protocols may be deployed in the same network. Initially, it is expected that Diameter will be deployed within new network devices, as well as within gateways enabling communication between legacy RADIUS @@ -373,9 +428,8 @@ Internet-Draft Diameter Base Protocol January 2011 support to be added to legacy networks, by addition of a gateway or server speaking both RADIUS and Diameter. - In addition to addressing the above requirements, Diameter also - provides support for the following: - + In addition to addressing the above requirements, Diameter also + provides support for the following: Capability negotiation @@ -383,19 +437,19 @@ Internet-Draft Diameter Base Protocol January 2011 a mandatory/non-mandatory flag for attributes. Since RADIUS clients and servers are not aware of each other's capabilities, they may not be able to successfully negotiate a mutually - acceptable service, or in some cases, even be aware of what + acceptable service or, in some cases, even be aware of what service has been implemented. Diameter includes support for error + handling (Section 7), capability negotiation (Section 5.3), and + mandatory/non-mandatory Attribute-Value Pairs (AVPs) + (Section 4.1). -Fajardo, et al. Expires July 24, 2011 [Page 7] - -Internet-Draft Diameter Base Protocol January 2011 - handling (Section 7), capability negotiation (Section 5.3), and - mandatory/non-mandatory Attribute-Value Pairs (AVPs) (Section - 4.1). +Fajardo, et al. Standards Track [Page 8] + +RFC 6733 Diameter Base Protocol October 2012 Peer discovery and configuration @@ -403,7 +457,7 @@ Internet-Draft Diameter Base Protocol January 2011 RADIUS implementations typically require that the name or address of servers or clients be manually configured, along with the corresponding shared secrets. This results in a large - administrative burden, and creates the temptation to reuse the + administrative burden and creates the temptation to reuse the RADIUS shared secret, which can result in major security vulnerabilities if the Request Authenticator is not globally and temporally unique as required in [RFC2865]. Through DNS, Diameter @@ -411,7 +465,6 @@ Internet-Draft Diameter Base Protocol January 2011 of dynamic session keys is enabled via transmission-level security. - Over time, the capabilities of Network Access Server (NAS) devices have increased substantially. As a result, while Diameter is a considerably more sophisticated protocol than RADIUS, it remains @@ -427,42 +480,41 @@ Internet-Draft Diameter Base Protocol January 2011 o Error notification - o Extensibility, through addition of new applications, commands and - AVPs (required in [RFC2989]). + o Extensibility, required in [RFC2989], through addition of new + applications, commands, and AVPs - o Basic services necessary for applications, such as handling of + o Basic services necessary for applications, such as the handling of user sessions or accounting All data delivered by the protocol is in the form of AVPs. Some of these AVP values are used by the Diameter protocol itself, while others deliver data associated with particular applications that employ Diameter. AVPs may be arbitrarily added to Diameter messages, - the only restriction being that the Augmented Backus-Naur Form (ABNF, - [RFC5234]) Command Code syntax specification (Section 3.2) is - satisfied. AVPs are used by the base Diameter protocol to support - the following required features: + the only restriction being that the Command Code Format (CCF) + specification (Section 3.2) be satisfied. AVPs are used by the base + Diameter protocol to support the following required features: + o Transporting of user authentication information, for the purposes + of enabling the Diameter server to authenticate the user + o Transporting of service-specific authorization information, + between client and servers, allowing the peers to decide whether a + user's access request should be granted -Fajardo, et al. Expires July 24, 2011 [Page 8] - -Internet-Draft Diameter Base Protocol January 2011 - o Transporting of user authentication information, for the purposes - of enabling the Diameter server to authenticate the user. +Fajardo, et al. Standards Track [Page 9] + +RFC 6733 Diameter Base Protocol October 2012 - o Transporting of service-specific authorization information, - between client and servers, allowing the peers to decide whether a - user's access request should be granted. o Exchanging resource usage information, which may be used for accounting purposes, capacity planning, etc. - o Routing, relaying, proxying and redirecting of Diameter messages - through a server hierarchy. + o Routing, relaying, proxying, and redirecting of Diameter messages + through a server hierarchy - The Diameter base protocol satisfies the minimum requirements for an + The Diameter base protocol satisfies the minimum requirements for a AAA protocol, as specified by [RFC2989]. The base protocol may be used by itself for accounting purposes only, or it may be used with a Diameter application, such as Mobile IPv4 [RFC4004], or network @@ -473,16 +525,16 @@ Internet-Draft Diameter Base Protocol January 2011 many applications might provide functionality not provided by Diameter. Therefore, it is imperative that the designers of new applications understand their requirements before using Diameter. - See Section 2.4 for more information on Diameter applications. + See Section 1.3.4 for more information on Diameter applications. Any node can initiate a request. In that sense, Diameter is a peer- - to-peer protocol. In this document, a Diameter Client is a device at + to-peer protocol. In this document, a Diameter client is a device at the edge of the network that performs access control, such as a Network Access Server (NAS) or a Foreign Agent (FA). A Diameter client generates Diameter messages to request authentication, authorization, and accounting services for the user. A Diameter agent is a node that does not provide local user authentication or - authorization services; agents include proxies, redirects and relay + authorization services; agents include proxies, redirects, and relay agents. A Diameter server performs authentication and/or authorization of the user. A Diameter node may act as an agent for certain requests while acting as a server for others. @@ -494,33 +546,33 @@ Internet-Draft Diameter Base Protocol January 2011 The Diameter specification consists of an updated version of the base protocol specification (this document) and the Transport Profile - [RFC3539]. This document obsoletes RFC 3588. A summary of the base - protocol updates included in this document can be found in - Section 1.1.3. - - - -Fajardo, et al. Expires July 24, 2011 [Page 9] - -Internet-Draft Diameter Base Protocol January 2011 - + [RFC3539]. This document obsoletes both RFC 3588 and RFC 5719. A + summary of the base protocol updates included in this document can be + found in Section 1.1.3. This document defines the base protocol specification for AAA, which includes support for accounting. There are also a myriad of applications documents describing applications that use this base - specification for Authentication, Authorization and Accounting. + specification for Authentication, Authorization, and Accounting. These application documents specify how to use the Diameter protocol within the context of their application. + + +Fajardo, et al. Standards Track [Page 10] + +RFC 6733 Diameter Base Protocol October 2012 + + The Transport Profile document [RFC3539] discusses transport layer issues that arise with AAA protocols and recommendations on how to overcome these issues. This document also defines the Diameter failover algorithm and state machine. - Clarifications on the Routing of Diameter Request based on Username - and the Realm [RFC5729] defines specific behavior on how to route - request based on the content of the User-Name AVP (Attribute Value - Pair). + "Clarifications on the Routing of Diameter Request Based on the + Username and the Realm" [RFC5729] defines specific behavior on how to + route requests based on the content of the User-Name AVP (Attribute + Value Pair). 1.1.2. Conventions Used in This Document @@ -528,100 +580,100 @@ Internet-Draft Diameter Base Protocol January 2011 "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this document are to be interpreted as described in [RFC2119]. -1.1.3. Changes from RFC3588 +1.1.3. Changes from RFC 3588 This document obsoletes RFC 3588 but is fully backward compatible with that document. The changes introduced in this document focus on - fixing issues that have surfaced during implementation of [RFC3588]. - An overview of some the major changes are given below. - - o Deprecated the use of Inband-Security AVP for negotiating - transport layer security. It has been generally considered that - bootstrapping of TLS via Inband-Security AVP creates certain - security risk because it does not completely protect the - information carried in the CER (Capabilities Exchange Request)/CEA - (Capabilities Exchange Answer). This version of Diameter adopted - a common approach of defining a well-known secured port that peers - should use when communicating via TLS/TCP and DTLS/SCTP. This new - approach augments the existing Inband-Security negotiation but - does not completely replace it. The old method is kept for - backwards compatibility reasons. + fixing issues that have surfaced during the implementation of + Diameter (RFC 3588). An overview of some the major changes are given + below. + + o Deprecated the use of the Inband-Security AVP for negotiating + Transport Layer Security (TLS) [RFC5246]. It has been generally + considered that bootstrapping of TLS via Inband-Security AVP + creates certain security risks because it does not completely + protect the information carried in the CER/CEA (Capabilities- + Exchange-Request/Capabilities-Exchange-Answer). This version of + Diameter adopts the common approach of defining a well-known + secured port that peers should use when communicating via TLS/TCP + and DTLS/SCTP. This new approach augments the existing in-band + security negotiation, but it does not completely replace it. The + old method is kept for backward compatibility reasons. o Deprecated the exchange of CER/CEA messages in the open state. - This feature was implied in the peer state machine table of - [RFC3588] but it was not clearly defined anywhere else in that + This feature was implied in the peer state machine table of RFC + 3588, but it was not clearly defined anywhere else in that document. As work on this document progressed, it became clear - that the multiplicity of meaning and use of Application Id AVPs in + that the multiplicity of meaning and use of Application-Id AVPs in the CER/CEA messages (and the messages themselves) is seen as an + abuse of the Diameter extensibility rules and thus required + simplification. Capabilities exchange in the open state has been + re-introduced in a separate specification [RFC6737], which clearly + defines new commands for this feature. -Fajardo, et al. Expires July 24, 2011 [Page 10] - -Internet-Draft Diameter Base Protocol January 2011 - abuse of the Diameter extensibility rules and thus required - simplification. It is assumed that the capabilities exchange in - the open state will be re-introduced in a separate specification - which clearly defines new commands for this feature. +Fajardo, et al. Standards Track [Page 11] + +RFC 6733 Diameter Base Protocol October 2012 + - o Simplified Security Requirements. The use of a secured transport + o Simplified security requirements. The use of a secured transport for exchanging Diameter messages remains mandatory. However, TLS/ - TCP and DTLS/SCTP has become the primary method of securing - Diameter and IPsec is a secondary alternative. See Section 13 for - details. The support for the End-to-End security framework - (E2ESequence AVP and 'P'-bit in the AVP header) has also been + TCP and DTLS/SCTP have become the primary methods of securing + Diameter with IPsec as a secondary alternative. See Section 13 + for details. The support for the End-to-End security framework + (E2E-Sequence AVP and 'P'-bit in the AVP header) has also been deprecated. - o Diameter Extensibility Changes. This includes fixes to the + o Changed Diameter extensibility. This includes fixes to the Diameter extensibility description (Section 1.3 and others) to better aid Diameter application designers; in addition, the new specification relaxes the policy with respect to the allocation of - command codes for vendor-specific uses. - - o Application Id Usage. Clarify the proper use of Application Id - information which can be found in multiple places within a - Diameter message. This includes correlating Application Ids found - in the message headers and AVPs. These changes also clearly - specify the proper Application Id value to use for specific base - protocol messages (ASR/ASA, STR/STA) as well as clarifying the - content and use of Vendor-Specific-Application-Id. - - o Routing Fixes. This document more clearly specifies what - information (AVPs and Application Id) can be used for making + Command Codes for vendor-specific uses. + + o Clarified Application Id usage. Clarify the proper use of + Application Id information, which can be found in multiple places + within a Diameter message. This includes correlating Application + Ids found in the message headers and AVPs. These changes also + clearly specify the proper Application Id value to use for + specific base protocol messages (ASR/ASA, STR/STA) as well as + clarify the content and use of Vendor-Specific-Application-Id. + + o Clarified routing fixes. This document more clearly specifies + what information (AVPs and Application Ids) can be used for making general routing decisions. A rule for the prioritization of redirect routing criteria when multiple route entries are found - via redirects has also been added (See Section 6.13 for details). + via redirects has also been added (see Section 6.13). - o Simplification of Diameter Peer Discovery. The Diameter discovery + o Simplified Diameter peer discovery. The Diameter discovery process now supports only widely used discovery schemes; the rest have been deprecated (see Section 5.2 for details). - There are many other many miscellaneous fixes that have been - introduced in this document that may not be considered significant - but they are important nonetheless. Examples are removal of obsolete - types, fixes to command ABNFs, fixes to the state machine, - clarification of the election process, message validation, fixes to - Failed-AVP and Result-Code AVP values, etc. A comprehensive list of - changes is not shown here for practical reasons. - - - + There are many other miscellaneous fixes that have been introduced in + this document that may not be considered significant, but they have + value nonetheless. Examples are removal of obsolete types, fixes to + the state machine, clarification of the election process, message + validation, fixes to Failed-AVP and Result-Code AVP values, etc. All + of the errata filed against RFC 3588 prior to the publication of this + document have been addressed. A comprehensive list of changes is not + shown here for practical reasons. +1.2. Terminology + AAA + Authentication, Authorization, and Accounting. -Fajardo, et al. Expires July 24, 2011 [Page 11] - -Internet-Draft Diameter Base Protocol January 2011 -1.2. Terminology - AAA - Authentication, Authorization and Accounting. +Fajardo, et al. Standards Track [Page 12] + +RFC 6733 Diameter Base Protocol October 2012 ABNF @@ -631,14 +683,12 @@ Internet-Draft Diameter Base Protocol January 2011 is used to define message exchanges in a bi-directional communications protocol. - Accounting The act of collecting information on resource usage for the - purpose of capacity planning, auditing, billing or cost + purpose of capacity planning, auditing, billing, or cost allocation. - Accounting Record An accounting record represents a summary of the resource @@ -647,114 +697,102 @@ Internet-Draft Diameter Base Protocol January 2011 accounting events or accounting events from several devices serving the same user. - Authentication The act of verifying the identity of an entity (subject). - Authorization The act of determining whether a requesting entity (subject) will be allowed access to a resource (object). - - AVP + Attribute-Value Pair (AVP) The Diameter protocol consists of a header followed by one or more Attribute-Value-Pairs (AVPs). An AVP includes a header and is used to encapsulate protocol-specific data (e.g., routing - information) as well as authentication, authorization or + information) as well as authentication, authorization, or + accounting information. + Command Code Format (CCF) + A modified form of ABNF used to define Diameter commands (see + Section 3.2). -Fajardo, et al. Expires July 24, 2011 [Page 12] - -Internet-Draft Diameter Base Protocol January 2011 + Diameter Agent + A Diameter Agent is a Diameter node that provides relay, proxy, + redirect, or translation services. - accounting information. - Diameter Agent - A Diameter Agent is a Diameter Node that provides either relay, - proxy, redirect or translation services. +Fajardo, et al. Standards Track [Page 13] + +RFC 6733 Diameter Base Protocol October 2012 Diameter Client - A Diameter Client is a Diameter Node that supports Diameter client - applications as well as the base protocol. Diameter Clients are + A Diameter client is a Diameter node that supports Diameter client + applications as well as the base protocol. Diameter clients are often implemented in devices situated at the edge of a network and provide access control services for that network. Typical - examples of Diameter Clients include the Network Access Server + examples of Diameter clients include the Network Access Server (NAS) and the Mobile IP Foreign Agent (FA). - Diameter Node - A Diameter Node is a host process that implements the Diameter - protocol, and acts either as a Client, Agent or Server. - + A Diameter node is a host process that implements the Diameter + protocol and acts as either a client, an agent, or a server. Diameter Peer - If a Diameter Node shares a direct transport connection with - another Diameter Node, it is a Diameter Peer to that Diameter - Node. - + Two Diameter nodes sharing a direct TCP or SCTP transport + connection are called Diameter peers. Diameter Server - A Diameter Server is a Diameter Node that handles authentication, - authorization and accounting requests for a particular realm. By - its very nature, a Diameter Server must support Diameter server + A Diameter server is a Diameter node that handles authentication, + authorization, and accounting requests for a particular realm. By + its very nature, a Diameter server must support Diameter server applications in addition to the base protocol. - Downstream Downstream is used to identify the direction of a particular - Diameter message from the Home Server towards the Diameter Client. - - - - - - - -Fajardo, et al. Expires July 24, 2011 [Page 13] - -Internet-Draft Diameter Base Protocol January 2011 - + Diameter message from the home server towards the Diameter client. Home Realm A Home Realm is the administrative domain with which the user maintains an account relationship. - Home Server - A Diameter Server which serves the Home Realm. - + A Diameter server that serves the Home Realm. - Interim accounting + Interim Accounting An interim accounting message provides a snapshot of usage during - a user's session. It is typically implemented in order to provide - for partial accounting of a user's session in the case a device - reboot or other network problem prevents the delivery of a session - summary message or session record. + a user's session. Typically, it is implemented in order to + provide for partial accounting of a user's session in case a + device reboot or other network problem prevents the delivery of a + session summary message or session record. + + + + +Fajardo, et al. Standards Track [Page 14] + +RFC 6733 Diameter Base Protocol October 2012 Local Realm A local realm is the administrative domain providing services to a user. An administrative domain may act as a local realm for - certain users, while being a home realm for others. - + certain users while being a home realm for others. Multi-session @@ -764,60 +802,56 @@ Internet-Draft Diameter Base Protocol January 2011 leg of the bundle would be a session while the entire bundle would be a multi-session. - Network Access Identifier The Network Access Identifier, or NAI [RFC4282], is used in the Diameter protocol to extract a user's identity and realm. The identity is used to identify the user during authentication and/or - authorization, while the realm is used for message routing + authorization while the realm is used for message routing purposes. - - - - - - - -Fajardo, et al. Expires July 24, 2011 [Page 14] - -Internet-Draft Diameter Base Protocol January 2011 - - Proxy Agent or Proxy In addition to forwarding requests and responses, proxies make policy decisions relating to resource usage and provisioning. - This is typically accomplished by tracking the state of NAS - devices. While proxies typically do not respond to client - Requests prior to receiving a Response from the server, they may - originate Reject messages in cases where policies are violated. - As a result, proxies need to understand the semantics of the - messages passing through them, and may not support all Diameter + Typically, this is accomplished by tracking the state of NAS + devices. While proxies usually do not respond to client requests + prior to receiving a response from the server, they may originate + Reject messages in cases where policies are violated. As a + result, proxies need to understand the semantics of the messages + passing through them, and they may not support all Diameter applications. - Realm The string in the NAI that immediately follows the '@' character. - NAI realm names are required to be unique, and are piggybacked on + NAI realm names are required to be unique and are piggybacked on the administration of the DNS namespace. Diameter makes use of the realm, also loosely referred to as domain, to determine - whether messages can be satisfied locally, or whether they must be + whether messages can be satisfied locally or whether they must be routed or redirected. In RADIUS, realm names are not necessarily piggybacked on the DNS namespace but may be independent of it. - Real-time Accounting + + + + + + +Fajardo, et al. Standards Track [Page 15] + +RFC 6733 Diameter Base Protocol October 2012 + + + Real-Time Accounting Real-time accounting involves the processing of information on - resource usage within a defined time window. Time constraints are - typically imposed in order to limit financial risk. The Diameter - Credit Control Application [RFC4006] is an example of an + resource usage within a defined time window. Typically, time + constraints are imposed in order to limit financial risk. The + Diameter Credit-Control Application [RFC4006] is an example of an application that defines real-time accounting functionality. - Relay Agent or Relay Relays forward requests and responses based on routing-related @@ -827,20 +861,9 @@ Internet-Draft Diameter Base Protocol January 2011 the semantics of messages or non-routing AVPs, and are capable of handling any Diameter application or message type. Since relays make decisions based on information in routing AVPs and realm - forwarding tables they do not keep state on NAS resource usage or + forwarding tables, they do not keep state on NAS resource usage or sessions in progress. - - - - - - -Fajardo, et al. Expires July 24, 2011 [Page 15] - -Internet-Draft Diameter Base Protocol January 2011 - - Redirect Agent Rather than forwarding requests and responses between clients and @@ -850,11 +873,10 @@ Internet-Draft Diameter Base Protocol January 2011 client and server. Redirect agents do not originate messages and are capable of handling any message type, although they may be configured only to redirect messages of certain types, while - acting as relay or proxy agents for other types. As with proxy + acting as relay or proxy agents for other types. As with relay agents, redirect agents do not keep state with respect to sessions or NAS resources. - Session A session is a related progression of events devoted to a @@ -863,14 +885,19 @@ Internet-Draft Diameter Base Protocol January 2011 packets with the same Session-Id are considered to be part of the same session. - Stateful Agent A stateful agent is one that maintains session state information, by keeping track of all authorized active sessions. Each authorized session is bound to a particular service, and its state - is considered active either until it is notified otherwise, or by - expiration. + is considered active either until it is notified otherwise or + until expiration. + + + +Fajardo, et al. Standards Track [Page 16] + +RFC 6733 Diameter Base Protocol October 2012 Sub-session @@ -881,53 +908,33 @@ Internet-Draft Diameter Base Protocol January 2011 during the same session) or serially. These changes in sessions are tracked with the Accounting-Sub-Session-Id. - - Transaction state + Transaction State The Diameter protocol requires that agents maintain transaction state, which is used for failover purposes. Transaction state - implies that upon forwarding a request, the Hop-by-Hop identifier + implies that upon forwarding a request, the Hop-by-Hop Identifier is saved; the field is replaced with a locally unique identifier, which is restored to its original value when the corresponding - - - -Fajardo, et al. Expires July 24, 2011 [Page 16] - -Internet-Draft Diameter Base Protocol January 2011 - - answer is received. The request's state is released upon receipt of the answer. A stateless agent is one that only maintains transaction state. - Translation Agent - A translation agent is a stateful Diameter node that performs - protocol translation between Diameter and another AAA protocol, - such as RADIUS. - - - Transport Connection - - A transport connection is a TCP or SCTP connection existing - directly between two Diameter peers, otherwise known as a Peer-to- - Peer Connection. - + A translation agent (TLA in Figure 4) is a stateful Diameter node + that performs protocol translation between Diameter and another + AAA protocol, such as RADIUS. Upstream Upstream is used to identify the direction of a particular - Diameter message from the Diameter Client towards the Home Server. - + Diameter message from the Diameter client towards the home server. User The entity or device requesting or using some resource, in support of which a Diameter client has generated a request. - 1.3. Approach to Extensibility The Diameter protocol is designed to be extensible, using several @@ -941,107 +948,108 @@ Internet-Draft Diameter Base Protocol January 2011 o Creating new applications - From the point of view of extensibility Diameter authentication, - authorization and accounting applications are treated in the same - way. - -Fajardo, et al. Expires July 24, 2011 [Page 17] +Fajardo, et al. Standards Track [Page 17] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 - Note: Protocol designers should try to re-use existing functionality, + From the point of view of extensibility, Diameter authentication, + authorization, and accounting applications are treated in the same + way. + + Note: Protocol designers should try to reuse existing functionality, namely AVP values, AVPs, commands, and Diameter applications. Reuse simplifies standardization and implementation. To avoid potential - interoperability issues it is important to ensure that the semantics - of the re-used features are well understood. Given that Diameter can - also carry RADIUS attributes as Diameter AVPs, such re-use - considerations apply also to existing RADIUS attributes that may be + interoperability issues, it is important to ensure that the semantics + of the reused features are well understood. Given that Diameter can + also carry RADIUS attributes as Diameter AVPs, such reuse + considerations also apply to existing RADIUS attributes that may be useful in a Diameter application. -1.3.1. Defining New AVP Values +1.3.1. Defining New AVP Values In order to allocate a new AVP value for AVPs defined in the Diameter - Base protocol, the IETF needs to approve a new RFC that describes the + base protocol, the IETF needs to approve a new RFC that describes the AVP value. IANA considerations for these AVP values are discussed in - Section 11.4. + Section 11.3. The allocation of AVP values for other AVPs is guided by the IANA considerations of the document that defines those AVPs. Typically, - allocation of new values for an AVP defined in an IETF RFC should - require IETF Review [RFC5226], whereas values for vendor-specific - AVPs can be allocated by the vendor. + allocation of new values for an AVP defined in an RFC would require + IETF Review [RFC5226], whereas values for vendor-specific AVPs can be + allocated by the vendor. -1.3.2. Creating New AVPs +1.3.2. Creating New AVPs A new AVP being defined MUST use one of the data types listed in - Section 4.2 or Section 4.3. If an appropriate derived data type is - already defined, it SHOULD be used instead of a base data type to - encourage reusability and good design practice. + Sections 4.2 or 4.3. If an appropriate derived data type is already + defined, it SHOULD be used instead of a base data type to encourage + reusability and good design practice. In the event that a logical grouping of AVPs is necessary, and multiple "groups" are possible in a given command, it is recommended that a Grouped AVP be used (see Section 4.4). The creation of new AVPs can happen in various ways. The recommended - approach is to define a new general-purpose AVP in a standards track - RFC approved by the IETF. However, as described in Section 11.1.1 - there are also other mechanisms. + approach is to define a new general-purpose AVP in a Standards Track + RFC approved by the IETF. However, as described in Section 11.1.1, + there are other mechanisms. -1.3.3. Creating New Commands +1.3.3. Creating New Commands A new Command Code MUST be allocated when required AVPs (those - indicated as {AVP} in the ABNF definition) are added to, deleted from + indicated as {AVP} in the CCF definition) are added to, deleted from, or redefined in (for example, by changing a required AVP into an optional one) an existing command. - Furthermore, if the transport characteristics of a command are - changed (for example, with respect to the number of round trips - required) a new Command Code MUST be registered. - -Fajardo, et al. Expires July 24, 2011 [Page 18] +Fajardo, et al. Standards Track [Page 18] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 + + Furthermore, if the transport characteristics of a command are + changed (for example, with respect to the number of round trips + required), a new Command Code MUST be registered. - A change to the ABNF of a command, such as described above, MUST + A change to the CCF of a command, such as described above, MUST result in the definition of a new Command Code. This subsequently - leads to the need to define a new Diameter Application for any - application that will use that new Command. - - The IANA considerations for commands are discussed in Section 11.2.1. - -1.3.4. Creating New Diameter Applications - - Every Diameter application specification MUST have an IANA assigned - Application Id (see Section 2.4 and Section 11.3). The managed - Application Id space is flat and there is no relationship between - different Diameter applications with respect to their Application - Ids. As such, there is no versioning support provided by these - application Ids itself; every Diameter application is a standalone - application. If the application has a relationship with other - Diameter applications, such a relationship is not known to Diameter. - - Before describing the rules for creating new Diameter applications it - is important to discuss the semantics of the AVPs occurrences as - stated in the ABNF and the M-bit flag (Section 4.1) for an AVP. - There is no relationship imposed between the two; they are set + leads to the need to define a new Diameter application for any + application that will use that new command. + + The IANA considerations for Command Codes are discussed in + Section 3.1. + +1.3.4. Creating New Diameter Applications + + Every Diameter application specification MUST have an IANA-assigned + Application Id (see Section 2.4). The managed Application ID space + is flat, and there is no relationship between different Diameter + applications with respect to their Application Ids. As such, there + is no versioning support provided by these Application Ids + themselves; every Diameter application is a standalone application. + If the application has a relationship with other Diameter + applications, such a relationship is not known to Diameter. + + Before describing the rules for creating new Diameter applications, + it is important to discuss the semantics of the AVP occurrences as + stated in the CCF and the M-bit flag (Section 4.1) for an AVP. There + is no relationship imposed between the two; they are set independently. - o The ABNF indicates what AVPs are placed into a Diameter Command by - the sender of that Command. Often, since there are multiple modes - of protocol interactions many of the AVPs are indicated as + o The CCF indicates what AVPs are placed into a Diameter command by + the sender of that command. Often, since there are multiple modes + of protocol interactions, many of the AVPs are indicated as optional. o The M-bit allows the sender to indicate to the receiver whether or not understanding the semantics of an AVP and its content is mandatory. If the M-bit is set by the sender and the receiver - does not understand the AVP or the values carried within that AVP + does not understand the AVP or the values carried within that AVP, then a failure is generated (see Section 7). It is the decision of the protocol designer when to develop a new @@ -1050,77 +1058,48 @@ Internet-Draft Diameter Base Protocol January 2011 of the following criteria are met: - M-bit Setting - An AVP with the M-bit in the MUST column of the AVP flag table is - added to an existing Command/Application. - An AVP with the M-bit in the MAY column of the AVP flag table is - added to an existing Command/Application. -Fajardo, et al. Expires July 24, 2011 [Page 19] +Fajardo, et al. Standards Track [Page 19] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 + + M-bit Setting + + An AVP with the M-bit in the MUST column of the AVP flag table is + added to an existing Command/Application. An AVP with the M-bit + in the MAY column of the AVP flag table is added to an existing + Command/Application. Note: The M-bit setting for a given AVP is relevant to an - Application and each command within that application which - includes the AVP. That is, if an AVP appears in two commands for + Application and each command within that application that includes + the AVP. That is, if an AVP appears in two commands for application Foo and the M-bit settings are different in each command, then there should be two AVP flag tables describing when to set the M-bit. Commands - A new command is used within the existing application either - because an additional command is added, an existing command has + A new command is used within the existing application because + either an additional command is added, an existing command has been modified so that a new Command Code had to be registered, or a command has been deleted. - If the ABNF definition of a command allows it, an implementation may + AVP Flag bits + + If an existing application changes the meaning/semantics of its + AVP Flags or adds new flag bits, then a new Diameter application + MUST be created. + + If the CCF definition of a command allows it, an implementation may add arbitrary optional AVPs with the M-bit cleared (including vendor- specific AVPs) to that command without needing to define a new application. Please refer to Section 11.1.1 for details. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Fajardo, et al. Expires July 24, 2011 [Page 20] - -Internet-Draft Diameter Base Protocol January 2011 - - 2. Protocol Overview The base Diameter protocol concerns itself with establishing @@ -1137,9 +1116,17 @@ Internet-Draft Diameter Base Protocol January 2011 The initial request for authentication and/or authorization of a user would include the Session-Id AVP. The Session-Id is then used in all subsequent messages to identify the user's session (see Section 8 for - more information). The communicating party may accept the request, - or reject it by returning an answer message with the Result-Code AVP - set to indicate an error occurred. The specific behavior of the + + + +Fajardo, et al. Standards Track [Page 20] + +RFC 6733 Diameter Base Protocol October 2012 + + + more information). The communicating party may accept the request or + reject it by returning an answer message with the Result-Code AVP set + to indicate that an error occurred. The specific behavior of the Diameter server or client receiving a request depends on the Diameter application employed. @@ -1153,30 +1140,23 @@ Internet-Draft Diameter Base Protocol January 2011 applications. For authentication and authorization, it is always extended for a particular application. - Diameter Clients MUST support the base protocol, which includes + Diameter clients MUST support the base protocol, which includes accounting. In addition, they MUST fully support each Diameter application that is needed to implement the client's service, e.g., - NASREQ and/or Mobile IPv4. A Diameter Client MUST be referred to as - "Diameter X Client" where X is the application which it supports, and - not a "Diameter Client". + Network Access Server Requirements (NASREQ) [RFC2881] and/or Mobile + IPv4. A Diameter client MUST be referred to as "Diameter X Client" + where X is the application that it supports and not a "Diameter + Client". - Diameter Servers MUST support the base protocol, which includes + Diameter servers MUST support the base protocol, which includes accounting. In addition, they MUST fully support each Diameter application that is needed to implement the intended service, e.g., - NASREQ and/or Mobile IPv4. A Diameter Server MUST be referred to as - "Diameter X Server" where X is the application which it supports, and + NASREQ and/or Mobile IPv4. A Diameter server MUST be referred to as + "Diameter X Server" where X is the application that it supports, and not a "Diameter Server". - Diameter Relays and redirect agents are transparent to the Diameter - applications but they MUST support the Diameter base protocol, which - - - -Fajardo, et al. Expires July 24, 2011 [Page 21] - -Internet-Draft Diameter Base Protocol January 2011 - - + Diameter relays and redirect agents are transparent to the Diameter + applications, but they MUST support the Diameter base protocol, which includes accounting, and all Diameter applications. Diameter proxies MUST support the base protocol, which includes @@ -1186,55 +1166,75 @@ Internet-Draft Diameter Base Protocol January 2011 "Diameter X Proxy" where X is the application which it supports, and not a "Diameter Proxy". + + + + + + + + + +Fajardo, et al. Standards Track [Page 21] + +RFC 6733 Diameter Base Protocol October 2012 + + 2.1. Transport The Diameter Transport profile is defined in [RFC3539]. - The base Diameter protocol is run on port 3868 for both TCP [RFC793] - and SCTP [RFC4960]. For TLS [RFC5246] and DTLS [RFC4347], a Diameter - node that initiate a connection prior to any message exchanges MUST - run on port [TBD]. It is assumed that TLS is run on top of TCP when - it is used and DTLS is run on top of SCTP when it is used. + The base Diameter protocol is run on port 3868 for both TCP [RFC0793] + and SCTP [RFC4960]. For TLS [RFC5246] and Datagram Transport Layer + Security (DTLS) [RFC6347], a Diameter node that initiates a + connection prior to any message exchanges MUST run on port 5658. It + is assumed that TLS is run on top of TCP when it is used, and DTLS is + run on top of SCTP when it is used. If the Diameter peer does not support receiving TLS/TCP and DTLS/SCTP - connections on port [TBD], i.e. the peer complies only with - [RFC3588], then the initiator MAY revert to using TCP or SCTP and on - port 3868. Note that this scheme is kept for the purpose of - backwards compatibility only and that there are inherent security - vulnerabilities when the initial CER/CEA messages are sent un- - protected (see Section 5.6). + connections on port 5658 (i.e., the peer complies only with RFC + 3588), then the initiator MAY revert to using TCP or SCTP on port + 3868. Note that this scheme is kept only for the purpose of backward + compatibility and that there are inherent security vulnerabilities + when the initial CER/CEA messages are sent unprotected (see + Section 5.6). - Diameter clients MUST support either TCP or SCTP, while agents and - servers SHOULD support both. + Diameter clients MUST support either TCP or SCTP; agents and servers + SHOULD support both. A Diameter node MAY initiate connections from a source port other than the one that it declares it accepts incoming connections on, and - MUST be prepared to receive connections on port 3868 for TCP or SCTP - and port [TBD] for TLS/TCP and DTLS/SCTP connections. A given - Diameter instance of the peer state machine MUST NOT use more than - one transport connection to communicate with a given peer, unless - multiple instances exist on the peer in which case a separate - connection per process is allowed. + it MUST always be prepared to receive connections on port 3868 for + TCP or SCTP and port 5658 for TLS/TCP and DTLS/SCTP connections. + When DNS-based peer discovery (Section 5.2) is used, the port numbers + received from SRV records take precedence over the default ports + (3868 and 5658). + + A given Diameter instance of the peer state machine MUST NOT use more + than one transport connection to communicate with a given peer, + unless multiple instances exist on the peer, in which, case a + separate connection per process is allowed. When no transport connection exists with a peer, an attempt to - connect SHOULD be periodically made. This behavior is handled via + connect SHOULD be made periodically. This behavior is handled via the Tc timer (see Section 12 for details), whose recommended value is 30 seconds. There are certain exceptions to this rule, such as when a peer has terminated the transport connection stating that it does not wish to communicate. When connecting to a peer and either zero or more transports are - specified, TLS SHOULD be tried first, followed by DTLS, then by TCP + specified, TLS SHOULD be tried first, followed by DTLS, then by TCP, + and finally by SCTP. See Section 5.2 for more information on peer + discovery. -Fajardo, et al. Expires July 24, 2011 [Page 22] - -Internet-Draft Diameter Base Protocol January 2011 - and finally by SCTP. See Section 5.2 for more information on peer - discovery. +Fajardo, et al. Standards Track [Page 22] + +RFC 6733 Diameter Base Protocol October 2012 + Diameter implementations SHOULD be able to interpret ICMP protocol port unreachable messages as explicit indications that the server is @@ -1253,18 +1253,18 @@ Internet-Draft Diameter Base Protocol January 2011 Diameter messages SHOULD be mapped into SCTP streams in a way that avoids head-of-the-line (HOL) blocking. Among different ways of performing the mapping that fulfill this requirement it is - RECOMMENDED that a Diameter node sends every Diameter message - (request or response) over the stream zero with the unordered flag - set. However, Diameter nodes MAY select and implement other design - alternatives for avoiding HOL blocking such as using multiple streams - with the unordered flag cleared (as originally instructed in - RFC3588). On the receiving side, a Diameter entity MUST be ready to - receive Diameter messages over any stream and it is free to return - responses over a different stream. This way, both sides manage the - available streams in the sending direction, independently of the - streams chosen by the other side to send a particular Diameter - message. These messages can be out-of-order and belong to different - Diameter sessions. + RECOMMENDED that a Diameter node send every Diameter message (request + or response) over stream zero with the unordered flag set. However, + Diameter nodes MAY select and implement other design alternatives for + avoiding HOL blocking such as using multiple streams with the + unordered flag cleared (as originally instructed in RFC 3588). On + the receiving side, a Diameter entity MUST be ready to receive + Diameter messages over any stream, and it is free to return responses + over a different stream. This way, both sides manage the available + streams in the sending direction, independently of the streams chosen + by the other side to send a particular Diameter message. These + messages can be out-of-order and belong to different Diameter + sessions. Out-of-order delivery has special concerns during a connection establishment and termination. When a connection is established, the @@ -1275,30 +1275,37 @@ Internet-Draft Diameter Base Protocol January 2011 the connection. In order to avoid this race condition, the receiver side SHOULD NOT use out-of-order delivery methods until the first message has been received from the initiator, proving that it has - moved to I-Open state. To trigger such message, the receiver side - could send a DWR immediatly after sending CEA. Upon reception of the - corresponding DWA, the receiver side should start using out-of-order - delivery methods to counter the HOL blocking. + moved to I-Open state. To trigger such a message, the receiver side + could send a DWR immediately after sending a CEA. Upon reception of + the corresponding DWA, the receiver side should start using out-of- + order delivery methods to counter the HOL blocking. Another race condition may occur when DPR and DPA messages are used. + Both DPR and DPA are small in size; thus, they may be delivered to + the peer faster than application messages when an out-of-order + delivery mechanism is used. Therefore, it is possible that a DPR/DPA -Fajardo, et al. Expires July 24, 2011 [Page 23] +Fajardo, et al. Standards Track [Page 23] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 + + exchange completes while application messages are still in transit, + resulting in a loss of these messages. An implementation could + mitigate this race condition, for example, using timers, and wait for + a short period of time for pending application level messages to + arrive before proceeding to disconnect the transport connection. + Eventually, lost messages are handled by the retransmission mechanism + described in Section 5.5.4. - Both DPR and DPA are small in size, thus they may be delivered faster - to the peer than application messages when out-of-order delivery - mechanism is used. Therefore, it is possible that a DPR/DPA exchange - completes while application messages are still in transit, resulting - to a loss of these messages. An implementation could mitigate this - race condition, for example, using timers and wait for a short period - of time for pending application level messages to arrive before - proceeding to disconnect the transport connection. Eventually, lost - messages are handled by the retransmission mechanism described in - Section 5.5.4. + A Diameter agent SHOULD use dedicated payload protocol identifiers + (PPIDs) for clear text and encrypted SCTP DATA chunks instead of only + using the unspecified payload protocol identifier (value 0). For + this purpose, two PPID values are allocated: the PPID value 46 is for + Diameter messages in clear text SCTP DATA chunks, and the PPID value + 47 is for Diameter messages in protected DTLS/SCTP DATA chunks. 2.2. Securing Diameter Messages @@ -1307,7 +1314,7 @@ Internet-Draft Diameter Base Protocol January 2011 the use of TLS/TCP and DTLS/SCTP. If desired, alternative security mechanisms that are independent of Diameter, such as IPsec [RFC4301], can be deployed to secure connections between peers. The Diameter - protocol MUST NOT be used without any security mechanism. + protocol MUST NOT be used without one of TLS, DTLS, or IPsec. 2.3. Diameter Application Compliance @@ -1318,37 +1325,40 @@ Internet-Draft Diameter Base Protocol January 2011 Implementations MAY add arbitrary optional AVPs with the M-bit cleared (including vendor-specific AVPs) to a command defined in an - application, but only if the command's ABNF syntax specification + application, but only if the command's CCF syntax specification allows for it. Please refer to Section 11.1.1 for details. 2.4. Application Identifiers - Each Diameter application MUST have an IANA assigned Application Id - (see Section 11.3). The base protocol does not require an - Application Id since its support is mandatory. During the - capabilities exchange, Diameter nodes inform their peers of locally - supported applications. Furthermore, all Diameter messages contain - an Application Id, which is used in the message forwarding process. + Each Diameter application MUST have an IANA-assigned Application ID. + The base protocol does not require an Application Id since its + support is mandatory. During the capabilities exchange, Diameter + nodes inform their peers of locally supported applications. + Furthermore, all Diameter messages contain an Application Id, which + is used in the message forwarding process. - The following Application Id values are defined: - Diameter Common Messages 0 - Diameter Base Accounting 3 - Relay 0xffffffff - Relay and redirect agents MUST advertise the Relay Application -Fajardo, et al. Expires July 24, 2011 [Page 24] + +Fajardo, et al. Standards Track [Page 24] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 + + The following Application Id values are defined: + + Diameter common message 0 + Diameter base accounting 3 + Relay 0xffffffff - Identifier, while all other Diameter nodes MUST advertise locally - supported applications. The receiver of a Capabilities Exchange - message advertising Relay service MUST assume that the sender - supports all current and future applications. + Relay and redirect agents MUST advertise the Relay Application ID, + while all other Diameter nodes MUST advertise locally supported + applications. The receiver of a Capabilities Exchange message + advertising relay service MUST assume that the sender supports all + current and future applications. Diameter relay and proxy agents are responsible for finding an upstream server that supports the application of a particular @@ -1358,16 +1368,15 @@ Internet-Draft Diameter Base Protocol January 2011 2.5. Connections vs. Sessions This section attempts to provide the reader with an understanding of - the difference between connection and session, which are terms used - extensively throughout this document. + the difference between "connection" and "session", which are terms + used extensively throughout this document. - A connection refers to a transport level connection between two peers + A connection refers to a transport-level connection between two peers that is used to send and receive Diameter messages. A session is a - logical concept at the application layer existing between the + logical concept at the application layer that exists between the Diameter client and the Diameter server; it is identified via the Session-Id AVP. - +--------+ +-------+ +--------+ | Client | | Relay | | Server | +--------+ +-------+ +--------+ @@ -1377,100 +1386,93 @@ Internet-Draft Diameter Base Protocol January 2011 <-----------------------------> User session x - Figure 1: Diameter connections and sessions + Figure 1: Diameter Connections and Sessions In the example provided in Figure 1, peer connection A is established - between the Client and the Relay. Peer connection B is established - between the Relay and the Server. User session X spans from the - Client via the Relay to the Server. Each "user" of a service causes + between the client and the relay. Peer connection B is established + between the relay and the server. User session X spans from the + client via the relay to the server. Each "user" of a service causes an auth request to be sent, with a unique session identifier. Once accepted by the server, both the client and the server are aware of the session. - It is important to note that there is no relationship between a - connection and a session, and that Diameter messages for multiple - sessions are all multiplexed through a single connection. Also note - that Diameter messages pertaining to the session, both application - specific and those that are defined in this document such as ASR/ASA, - RAR/RAA and STR/STA MUST carry the Application Id of the application. -Fajardo, et al. Expires July 24, 2011 [Page 25] +Fajardo, et al. Standards Track [Page 25] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 - Diameter messages pertaining to peer connection establishment and - maintenance such as CER/CEA, DWR/DWA and DPR/DPA MUST carry an - Application Id of zero (0). + It is important to note that there is no relationship between a + connection and a session, and that Diameter messages for multiple + sessions are all multiplexed through a single connection. Also, note + that Diameter messages pertaining to the session, both application- + specific and those that are defined in this document such as ASR/ASA, + RAR/RAA, and STR/STA, MUST carry the Application Id of the + application. Diameter messages pertaining to peer connection + establishment and maintenance such as CER/CEA, DWR/DWA, and DPR/DPA + MUST carry an Application Id of zero (0). 2.6. Peer Table - The Diameter Peer Table is used in message forwarding, and referenced - by the Routing Table. A Peer Table entry contains the following - fields: + The Diameter peer table is used in message forwarding and is + referenced by the routing table. A peer table entry contains the + following fields: - Host identity + Host Identity - Following the conventions described for the DiameterIdentity - derived AVP data format in Section 4.3. This field contains the + Following the conventions described for the DiameterIdentity- + derived AVP data format in Section 4.3.1, this field contains the contents of the Origin-Host (Section 6.3) AVP found in the CER or CEA message. - StatusT - This is the state of the peer entry, and MUST match one of the + This is the state of the peer entry, and it MUST match one of the values listed in Section 5.6. - Static or Dynamic Specifies whether a peer entry was statically configured or dynamically discovered. - - Expiration time + Expiration Time Specifies the time at which dynamically discovered peer table - entries are to be either refreshed, or expired. - + entries are to be either refreshed or expired. If public key + certificates are used for Diameter security (e.g., with TLS), this + value MUST NOT be greater than the expiry times in the relevant + certificates. TLS/TCP and DTLS/SCTP Enabled Specifies whether TLS/TCP and DTLS/SCTP is to be used when communicating with the peer. - Additional security information, when needed (e.g., keys, - certificates) - - + certificates). - - -Fajardo, et al. Expires July 24, 2011 [Page 26] +Fajardo, et al. Standards Track [Page 26] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 2.7. Routing Table All Realm-Based routing lookups are performed against what is - commonly known as the Routing Table (see Section 12). A Routing - Table Entry contains the following fields: + commonly known as the routing table (see Section 12). Each routing + table entry contains the following fields: Realm Name - This is the field that is MUST be used as a primary key in the + This is the field that MUST be used as a primary key in the routing table lookups. Note that some implementations perform their lookups based on longest-match-from-the-right on the realm rather than requiring an exact match. - Application Identifier An application is identified by an Application Id. A route entry @@ -1478,21 +1480,19 @@ Internet-Draft Diameter Base Protocol January 2011 the message header. This field MUST be used as a secondary key field in routing table lookups. - Local Action The Local Action field is used to identify how a message should be treated. The following actions are supported: - - 1. LOCAL - Diameter messages that can be satisfied locally, and - do not need to be routed to another Diameter entity. + 1. LOCAL - Diameter messages that can be satisfied locally and do + not need to be routed to another Diameter entity. 2. RELAY - All Diameter messages that fall within this category - MUST be routed to a next hop Diameter entity that is indicated + MUST be routed to a next-hop Diameter entity that is indicated by the identifier described below. Routing is done without modifying any non-routing AVPs. See Section 6.1.9 for - relaying guidelines + relaying guidelines. 3. PROXY - All Diameter messages that fall within this category MUST be routed to a next Diameter entity that is indicated by @@ -1504,47 +1504,53 @@ Internet-Draft Diameter Base Protocol January 2011 4. REDIRECT - Diameter messages that fall within this category MUST have the identity of the home Diameter server(s) appended, and returned to the sender of the message. See - Section 6.1.8 for redirect guidelines. + Section 6.1.8 for redirection guidelines. + + + -Fajardo, et al. Expires July 24, 2011 [Page 27] +Fajardo, et al. Standards Track [Page 27] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 Server Identifier - One or more servers to which the message is to be routed. These - servers MUST also be present in the Peer table. When the Local - Action is set to RELAY or PROXY, this field contains the identity - of the server(s) the message MUST be routed to. When the Local + The identity of one or more servers to which the message is to be + routed. This identity MUST also be present in the Host Identity + field of the peer table (Section 2.6). When the Local Action is + set to RELAY or PROXY, this field contains the identity of the + server(s) to which the message MUST be routed. When the Local Action field is set to REDIRECT, this field contains the identity - of one or more servers the message MUST be redirected to. + of one or more servers to which the message MUST be redirected. Static or Dynamic Specifies whether a route entry was statically configured or dynamically discovered. - Expiration time + Expiration Time Specifies the time at which a dynamically discovered route table - entry expires. + entry expires. If public key certificates are used for Diameter + security (e.g., with TLS), this value MUST NOT be greater than the + expiry time in the relevant certificates. It is important to note that Diameter agents MUST support at least - one of the LOCAL, RELAY, PROXY or REDIRECT modes of operation. + one of the LOCAL, RELAY, PROXY, or REDIRECT modes of operation. Agents do not need to support all modes of operation in order to - conform with the protocol specification, but MUST follow the protocol - compliance guidelines in Section 2. Relay agents and proxies MUST - NOT reorder AVPs. + conform with the protocol specification, but they MUST follow the + protocol compliance guidelines in Section 2. Relay agents and + proxies MUST NOT reorder AVPs. The routing table MAY include a default entry that MUST be used for any requests not matching any of the other entries. The routing table MAY consist of only such an entry. When a request is routed, the target server MUST have advertised the - Application Id (see Section 2.4) for the given message, or have + Application Id (see Section 2.4) for the given message or have advertised itself as a relay or proxy agent. Otherwise, an error is returned with the Result-Code AVP set to DIAMETER_UNABLE_TO_DELIVER. @@ -1552,23 +1558,24 @@ Internet-Draft Diameter Base Protocol January 2011 In addition to clients and servers, the Diameter protocol introduces relay, proxy, redirect, and translation agents, each of which is - defined in Section 1.3. These Diameter agents are useful for several + defined in Section 1.2. Diameter agents are useful for several reasons: o They can distribute administration of systems to a configurable grouping, including the maintenance of security associations. - o They can be used for concentration of requests from an number of - co-located or distributed NAS equipment sets to a set of like user - groups. -Fajardo, et al. Expires July 24, 2011 [Page 28] +Fajardo, et al. Standards Track [Page 28] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 + o They can be used for concentration of requests from a number of + co-located or distributed NAS equipment sets to a set of like user + groups. + o They can do value-added processing to the requests or responses. o They can be used for load balancing. @@ -1578,7 +1585,7 @@ Internet-Draft Diameter Base Protocol January 2011 The Diameter protocol requires that agents maintain transaction state, which is used for failover purposes. Transaction state - implies that upon forwarding a request, its Hop-by-Hop identifier is + implies that upon forwarding a request, its Hop-by-Hop Identifier is saved; the field is replaced with a locally unique identifier, which is restored to its original value when the corresponding answer is received. The request's state is released upon receipt of the @@ -1593,7 +1600,7 @@ Internet-Draft Diameter Base Protocol January 2011 A stateful agent is one that maintains session state information by keeping track of all authorized active sessions. Each authorized session is bound to a particular service, and its state is considered - active either until the agent is notified otherwise, or the session + active until either the agent is notified otherwise or the session expires. Each authorized session has an expiration, which is communicated by Diameter servers via the Session-Timeout AVP. @@ -1604,40 +1611,43 @@ Internet-Draft Diameter Base Protocol January 2011 o Limiting resources authorized to a particular user - o Per user or transaction auditing + o Per-user or per-transaction auditing A Diameter agent MAY act in a stateful manner for some requests and be stateless for others. A Diameter implementation MAY act as one - type of agent for some requests, and as another type of agent for + type of agent for some requests and as another type of agent for others. -2.8.1. Relay Agents - Relay Agents are Diameter agents that accept requests and route - messages to other Diameter nodes based on information found in the - messages (e.g., Destination-Realm). This routing decision is - performed using a list of supported realms, and known peers. This is -Fajardo, et al. Expires July 24, 2011 [Page 29] + +Fajardo, et al. Standards Track [Page 29] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 + +2.8.1. Relay Agents - known as the Routing Table, as is defined further in Section 2.7. + Relay agents are Diameter agents that accept requests and route + messages to other Diameter nodes based on information found in the + messages (e.g., the value of the Destination-Realm AVP Section 6.6). + This routing decision is performed using a list of supported realms + and known peers. This is known as the routing table, as is defined + further in Section 2.7. Relays may, for example, be used to aggregate requests from multiple Network Access Servers (NASes) within a common geographical area - (POP). The use of Relays is advantageous since it eliminates the - need for NASes to be configured with the necessary security - information they would otherwise require to communicate with Diameter - servers in other realms. Likewise, this reduces the configuration - load on Diameter servers that would otherwise be necessary when NASes - are added, changed or deleted. + (Point of Presence, POP). The use of relays is advantageous since it + eliminates the need for NASes to be configured with the necessary + security information they would otherwise require to communicate with + Diameter servers in other realms. Likewise, this reduces the + configuration load on Diameter servers that would otherwise be + necessary when NASes are added, changed, or deleted. Relays modify Diameter messages by inserting and removing routing - information, but do not modify any other portion of a message. + information, but they do not modify any other portion of a message. Relays SHOULD NOT maintain session state but MUST maintain transaction state. @@ -1650,44 +1660,46 @@ Internet-Draft Diameter Base Protocol January 2011 Figure 2: Relaying of Diameter messages - The example provided in Figure 2 depicts a request issued from NAS, + The example provided in Figure 2 depicts a request issued from a NAS, which is an access device, for the user [email protected]. Prior to - issuing the request, NAS performs a Diameter route lookup, using + issuing the request, the NAS performs a Diameter route lookup, using "example.com" as the key, and determines that the message is to be - relayed to DRL, which is a Diameter Relay. DRL performs the same - route lookup as NAS, and relays the message to HMS, which is - example.com's Home Diameter Server. HMS identifies that the request - can be locally supported (via the realm), processes the + relayed to a DRL, which is a Diameter relay. The DRL performs the + same route lookup as the NAS, and relays the message to the HMS, + which is example.com's home server. The HMS identifies that the + request can be locally supported (via the realm), processes the authentication and/or authorization request, and replies with an - answer, which is routed back to NAS using saved transaction state. - - Since Relays do not perform any application level processing, they - provide relaying services for all Diameter applications, and - therefore MUST advertise the Relay Application Id. + answer, which is routed back to the NAS using saved transaction + state. -2.8.2. Proxy Agents + Since relays do not perform any application-level processing, they + provide relaying services for all Diameter applications; therefore, + they MUST advertise the Relay Application Id. - Similarly to relays, proxy agents route Diameter messages using the - Diameter Routing Table. However, they differ since they modify - messages to implement policy enforcement. This requires that proxies - maintain the state of their downstream peers (e.g., access devices) - to enforce resource usage, provide admission control, and - provisioning. -Fajardo, et al. Expires July 24, 2011 [Page 30] +Fajardo, et al. Standards Track [Page 30] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 + +2.8.2. Proxy Agents + + Similar to relays, proxy agents route Diameter messages using the + Diameter routing table. However, they differ since they modify + messages to implement policy enforcement. This requires that proxies + maintain the state of their downstream peers (e.g., access devices) + to enforce resource usage, provide admission control, and provide + provisioning. Proxies may, for example, be used in call control centers or access - ISPs that provide outsourced connections, they can monitor the number - and types of ports in use, and make allocation and admission - decisions according to their configuration. + ISPs that provide outsourced connections; they can monitor the number + and type of ports in use and make allocation and admission decisions + according to their configuration. Since enforcing policies requires an understanding of the service - being provided, Proxies MUST only advertise the Diameter applications + being provided, proxies MUST only advertise the Diameter applications they support. 2.8.3. Redirect Agents @@ -1709,18 +1721,12 @@ Internet-Draft Diameter Base Protocol January 2011 The example provided in Figure 3 depicts a request issued from the access device, NAS, for the user [email protected]. The message is forwarded by the NAS to its relay, DRL, which does not have a routing - entry in its Diameter Routing Table for example.com. DRL has a + entry in its Diameter routing table for example.com. The DRL has a default route configured to DRD, which is a redirect agent that - returns a redirect notification to DRL, as well as HMS' contact - information. Upon receipt of the redirect notification, DRL - establishes a transport connection with HMS, if one doesn't already - exist, and forwards the request to it. - - - - - - + returns a redirect notification to DRL, as well as the HMS' contact + information. Upon receipt of the redirect notification, the DRL + establishes a transport connection with the HMS, if one doesn't + already exist, and forwards the request to it. @@ -1729,12 +1735,9 @@ Internet-Draft Diameter Base Protocol January 2011 - - - -Fajardo, et al. Expires July 24, 2011 [Page 31] +Fajardo, et al. Standards Track [Page 31] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 +------+ @@ -1755,10 +1758,10 @@ Internet-Draft Diameter Base Protocol January 2011 Figure 3: Redirecting a Diameter Message - Since redirect agents do not perform any application level + Since redirect agents do not perform any application-level processing, they provide relaying services for all Diameter - applications, and therefore MUST advertise the Relay Application - Identifier. + applications; therefore, they MUST advertise the Relay Application + ID. 2.8.4. Translation Agents @@ -1773,7 +1776,7 @@ Internet-Draft Diameter Base Protocol January 2011 MUST maintain transaction state. Translation of messages can only occur if the agent recognizes the - application of a particular request, and therefore translation agents + application of a particular request; therefore, translation agents MUST only advertise their locally supported applications. +------+ ---------> +------+ ---------> +------+ @@ -1788,23 +1791,24 @@ Internet-Draft Diameter Base Protocol January 2011 -Fajardo, et al. Expires July 24, 2011 [Page 32] +Fajardo, et al. Standards Track [Page 32] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 2.9. Diameter Path Authorization - As noted in Section 2.2, Diameter provides transmission level + As noted in Section 2.2, Diameter provides transmission-level security for each connection using TLS/TCP and DTLS/SCTP. Therefore, - each connection can be authenticated, replay and integrity protected. + each connection can be authenticated and can be replay and integrity + protected. - In addition to authenticating each connection, each connection as - well as the entire session MUST also be authorized. Before - initiating a connection, a Diameter Peer MUST check that its peers - are authorized to act in their roles. For example, a Diameter peer - may be authentic, but that does not mean that it is authorized to act - as a Diameter Server advertising a set of Diameter applications. + In addition to authenticating each connection, the entire session + MUST also be authorized. Before initiating a connection, a Diameter + peer MUST check that its peers are authorized to act in their roles. + For example, a Diameter peer may be authentic, but that does not mean + that it is authorized to act as a Diameter server advertising a set + of Diameter applications. Prior to bringing up a connection, authorization checks are performed at each connection along the path. Diameter capabilities negotiation @@ -1815,7 +1819,7 @@ Internet-Draft Diameter Base Protocol January 2011 As noted in Section 6.1.9, a relay or proxy agent MUST append a Route-Record AVP to all requests forwarded. The AVP contains the - identity of the peer the request was received from. + identity of the peer from which the request was received. The home Diameter server, prior to authorizing a session, MUST check the Route-Record AVPs to make sure that the route traversed by the @@ -1823,7 +1827,7 @@ Internet-Draft Diameter Base Protocol January 2011 realm may not wish to honor requests that have been routed through an untrusted realm. By authorizing a request, the home Diameter server is implicitly indicating its willingness to engage in the business - transaction as specified by the contractual relationship between the + transaction as specified by any contractual relationship between the server and the previous hop. A DIAMETER_AUTHORIZATION_REJECTED error message (see Section 7.1.5) is sent if the route traversed by the request is unacceptable. @@ -1839,72 +1843,24 @@ Internet-Draft Diameter Base Protocol January 2011 willingness to take on financial risk relative to the session. A local realm may wish to limit this exposure, for example, by establishing credit limits for intermediate realms and refusing to - accept responses which would violate those limits. By issuing an - accounting request corresponding to the authorization response, the + accept responses that would violate those limits. By issuing an -Fajardo, et al. Expires July 24, 2011 [Page 33] +Fajardo, et al. Standards Track [Page 33] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 + accounting request corresponding to the authorization response, the local realm implicitly indicates its agreement to provide the service indicated in the authorization response. If the service cannot be provided by the local realm, then a DIAMETER_UNABLE_TO_COMPLY error message MUST be sent within the accounting request; a Diameter client receiving an authorization response for a service that it cannot - perform MUST NOT substitute an alternate service, and then send + perform MUST NOT substitute an alternate service and then send accounting requests for the alternate service instead. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Fajardo, et al. Expires July 24, 2011 [Page 34] - -Internet-Draft Diameter Base Protocol January 2011 - - 3. Diameter Header A summary of the Diameter header format is shown below. The fields @@ -1915,7 +1871,7 @@ Internet-Draft Diameter Base Protocol January 2011 +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Version | Message Length | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ - | command flags | Command-Code | + | Command Flags | Command Code | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ | Application-ID | +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ @@ -1935,13 +1891,23 @@ Internet-Draft Diameter Base Protocol January 2011 The Message Length field is three octets and indicates the length of the Diameter message including the header fields and the padded - AVPs. Thus the message length field is always a multiple of 4. + AVPs. Thus, the Message Length field is always a multiple of 4. Command Flags The Command Flags field is eight bits. The following bits are assigned: + + + + + +Fajardo, et al. Standards Track [Page 34] + +RFC 6733 Diameter Base Protocol October 2012 + + 0 1 2 3 4 5 6 7 +-+-+-+-+-+-+-+-+ |R P E T r r r r| @@ -1952,127 +1918,113 @@ Internet-Draft Diameter Base Protocol January 2011 If set, the message is a request. If cleared, the message is an answer. - - - - -Fajardo, et al. Expires July 24, 2011 [Page 35] - -Internet-Draft Diameter Base Protocol January 2011 - - P(roxiable) - If set, the message MAY be proxied, relayed or redirected. If + If set, the message MAY be proxied, relayed, or redirected. If cleared, the message MUST be locally processed. - E(rror) If set, the message contains a protocol error, and the message - will not conform to the ABNF described for this command. + will not conform to the CCF described for this command. Messages with the 'E' bit set are commonly referred to as error - messages. This bit MUST NOT be set in request messages. See - Section 7.2. + messages. This bit MUST NOT be set in request messages (see + Section 7.2). - - T(Potentially re-transmitted message) + T(Potentially retransmitted message) This flag is set after a link failover procedure, to aid the removal of duplicate requests. It is set when resending requests not yet acknowledged, as an indication of a possible duplicate due to a link failure. This bit MUST be cleared when - sending a request for the first time, otherwise the sender MUST - set this flag. Diameter agents only need to be concerned about - the number of requests they send based on a single received - request; retransmissions by other entities need not be tracked. - Diameter agents that receive a request with the T flag set, - MUST keep the T flag set in the forwarded request. This flag - MUST NOT be set if an error answer message (e.g., a protocol - error) has been received for the earlier message. It can be - set only in cases where no answer has been received from the - server for a request and the request is sent again. This flag - MUST NOT be set in answer messages. - + sending a request for the first time; otherwise, the sender + MUST set this flag. Diameter agents only need to be concerned + about the number of requests they send based on a single + received request; retransmissions by other entities need not be + tracked. Diameter agents that receive a request with the T + flag set, MUST keep the T flag set in the forwarded request. + This flag MUST NOT be set if an error answer message (e.g., a + protocol error) has been received for the earlier message. It + can be set only in cases where no answer has been received from + the server for a request, and the request has been sent again. + This flag MUST NOT be set in answer messages. r(eserved) - These flag bits are reserved for future use, and MUST be set to - zero, and ignored by the receiver. + These flag bits are reserved for future use; they MUST be set + to zero and ignored by the receiver. - Command-Code - The Command-Code field is three octets, and is used in order to - communicate the command associated with the message. The 24-bit - address space is managed by IANA (see Section 11.2.1). - Command-Code values 16,777,214 and 16,777,215 (hexadecimal values - FFFFFE -FFFFFF) are reserved for experimental use (See Section - 11.3). -Fajardo, et al. Expires July 24, 2011 [Page 36] +Fajardo, et al. Standards Track [Page 35] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 + + + Command Code + The Command Code field is three octets and is used in order to + communicate the command associated with the message. The 24-bit + address space is managed by IANA (see Section 3.1). Command Code + values 16,777,214 and 16,777,215 (hexadecimal values FFFFFE- + FFFFFF) are reserved for experimental use (see Section 11.2). - Application-ID + Application-ID - Application-ID is four octets and is used to identify to which - application the message is applicable for. The application can be - an authentication application, an accounting application or a - vendor specific application. See Section 11.3 for the possible - values that the application-id may use. + Application-ID is four octets and is used to identify for which + application the message is applicable. The application can be an + authentication application, an accounting application, or a + vendor-specific application. - The value of the application-id field in the header MUST be the - same as any relevant application-id AVPs contained in the message. + The value of the Application-ID field in the header MUST be the + same as any relevant Application-Id AVPs contained in the message. Hop-by-Hop Identifier The Hop-by-Hop Identifier is an unsigned 32-bit integer field (in - network byte order) and aids in matching requests and replies. - The sender MUST ensure that the Hop-by-Hop identifier in a request - is unique on a given connection at any given time, and MAY attempt - to ensure that the number is unique across reboots. The sender of - an Answer message MUST ensure that the Hop-by-Hop Identifier field - contains the same value that was found in the corresponding - request. The Hop-by-Hop identifier is normally a monotonically - increasing number, whose start value was randomly generated. An - answer message that is received with an unknown Hop-by-Hop - Identifier MUST be discarded. - + network byte order) that aids in matching requests and replies. + The sender MUST ensure that the Hop-by-Hop Identifier in a request + is unique on a given connection at any given time, and it MAY + attempt to ensure that the number is unique across reboots. The + sender of an answer message MUST ensure that the Hop-by-Hop + Identifier field contains the same value that was found in the + corresponding request. The Hop-by-Hop Identifier is normally a + monotonically increasing number, whose start value was randomly + generated. An answer message that is received with an unknown + Hop-by-Hop Identifier MUST be discarded. End-to-End Identifier The End-to-End Identifier is an unsigned 32-bit integer field (in - network byte order) and is used to detect duplicate messages. - Upon reboot implementations MAY set the high order 12 bits to + network byte order) that is used to detect duplicate messages. + Upon reboot, implementations MAY set the high order 12 bits to contain the low order 12 bits of current time, and the low order 20 bits to a random value. Senders of request messages MUST insert a unique identifier on each message. The identifier MUST remain locally unique for a period of at least 4 minutes, even - across reboots. The originator of an Answer message MUST ensure + across reboots. The originator of an answer message MUST ensure that the End-to-End Identifier field contains the same value that was found in the corresponding request. The End-to-End Identifier MUST NOT be modified by Diameter agents of any kind. The - combination of the Origin-Host (see Section 6.3) and this field is + combination of the Origin-Host AVP (Section 6.3) and this field is used to detect duplicates. Duplicate requests SHOULD cause the - same answer to be transmitted (modulo the hop-by-hop Identifier - field and any routing AVPs that may be present), and MUST NOT - affect any state that was set when the original request was - processed. Duplicate answer messages that are to be locally - consumed (see Section 6.2) SHOULD be silently discarded. - - + same answer to be transmitted (modulo the Hop-by-Hop Identifier -Fajardo, et al. Expires July 24, 2011 [Page 37] +Fajardo, et al. Standards Track [Page 36] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 + field and any routing AVPs that may be present), and they MUST NOT + affect any state that was set when the original request was + processed. Duplicate answer messages that are to be locally + consumed (see Section 6.2) SHOULD be silently discarded. + AVPs AVPs are a method of encapsulating information relevant to the @@ -2080,17 +2032,17 @@ Internet-Draft Diameter Base Protocol January 2011 3.1. Command Codes - Each command Request/Answer pair is assigned a command code, and the + Each command Request/Answer pair is assigned a Command Code, and the sub-type (i.e., request or answer) is identified via the 'R' bit in the Command Flags field of the Diameter header. - - Every Diameter message MUST contain a command code in its header's - Command-Code field, which is used to determine the action that is to + Every Diameter message MUST contain a Command Code in its header's + Command Code field, which is used to determine the action that is to be taken for a particular message. The following Command Codes are defined in the Diameter base protocol: - Command-Name Abbrev. Code Reference + Section + Command Name Abbrev. Code Reference -------------------------------------------------------- Abort-Session-Request ASR 274 8.5.1 Abort-Session-Answer ASA 274 8.5.2 @@ -2111,140 +2063,142 @@ Internet-Draft Diameter Base Protocol January 2011 Session-Termination- STA 275 8.4.2 Answer -3.2. Command Code ABNF specification - Every Command Code defined MUST include a corresponding ABNF - specification, which is used to define the AVPs that MUST or MAY be - present when sending the message. The following format is used in - the definition: - command-def = <command-name> "::=" diameter-message - command-name = diameter-name -Fajardo, et al. Expires July 24, 2011 [Page 38] - -Internet-Draft Diameter Base Protocol January 2011 - diameter-name = ALPHA *(ALPHA / DIGIT / "-") +Fajardo, et al. Standards Track [Page 37] + +RFC 6733 Diameter Base Protocol October 2012 - diameter-message = header [ *fixed] [ *required] [ *optional] - header = "<" "Diameter Header:" command-id - [r-bit] [p-bit] [e-bit] [application-id] ">" +3.2. Command Code Format Specification - application-id = 1*DIGIT + Every Command Code defined MUST include a corresponding Command Code + Format (CCF) specification, which is used to define the AVPs that + MUST or MAY be present when sending the message. The following ABNF + specifies the CCF used in the definition: - command-id = 1*DIGIT - ; The Command Code assigned to the command + command-def = "<" command-name ">" "::=" diameter-message - r-bit = ", REQ" - ; If present, the 'R' bit in the Command - ; Flags is set, indicating that the message - ; is a request, as opposed to an answer. + command-name = diameter-name - p-bit = ", PXY" - ; If present, the 'P' bit in the Command - ; Flags is set, indicating that the message - ; is proxiable. + diameter-name = ALPHA *(ALPHA / DIGIT / "-") - e-bit = ", ERR" - ; If present, the 'E' bit in the Command - ; Flags is set, indicating that the answer - ; message contains a Result-Code AVP in - ; the "protocol error" class. + diameter-message = header *fixed *required *optional - fixed = [qual] "<" avp-spec ">" - ; Defines the fixed position of an AVP + header = "<Diameter-Header:" command-id + [r-bit] [p-bit] [e-bit] [application-id]">" - required = [qual] "{" avp-spec "}" - ; The AVP MUST be present and can appear - ; anywhere in the message. + application-id = 1*DIGIT + command-id = 1*DIGIT + ; The Command Code assigned to the command. - optional = [qual] "[" avp-name "]" - ; The avp-name in the 'optional' rule cannot - ; evaluate to any AVP Name which is included - ; in a fixed or required rule. The AVP can - ; appear anywhere in the message. - ; - ; NOTE: "[" and "]" have a slightly different - ; meaning than in ABNF (RFC 5234]). These braces - ; cannot be used to express optional fixed rules - ; (such as an optional ICV at the end). To do this, - ; the convention is '0*1fixed'. + r-bit = ", REQ" + ; If present, the 'R' bit in the Command + ; Flags is set, indicating that the message + ; is a request as opposed to an answer. + p-bit = ", PXY" + ; If present, the 'P' bit in the Command + ; Flags is set, indicating that the message + ; is proxiable. + e-bit = ", ERR" + ; If present, the 'E' bit in the Command + ; Flags is set, indicating that the answer + ; message contains a Result-Code AVP in + ; the "protocol error" class. + fixed = [qual] "<" avp-spec ">" + ; Defines the fixed position of an AVP. -Fajardo, et al. Expires July 24, 2011 [Page 39] - -Internet-Draft Diameter Base Protocol January 2011 + required = [qual] "{" avp-spec "}" + ; The AVP MUST be present and can appear + ; anywhere in the message. - qual = [min] "*" [max] - ; See ABNF conventions, RFC 5234 Section 4. - ; The absence of any qualifiers depends on - ; whether it precedes a fixed, required, or - ; optional rule. If a fixed or required rule has - ; no qualifier, then exactly one such AVP MUST - ; be present. If an optional rule has no - ; qualifier, then 0 or 1 such AVP may be - ; present. If an optional rule has a qualifier, - ; then the value of min MUST be 0 if present. - min = 1*DIGIT - ; The minimum number of times the element may - ; be present. If absent, the default value is zero - ; for fixed and optional rules and one for required - ; rules. The value MUST be at least one for for - ; required rules. - max = 1*DIGIT - ; The maximum number of times the element may - ; be present. If absent, the default value is - ; infinity. A value of zero implies the AVP MUST - ; NOT be present. - avp-spec = diameter-name - ; The avp-spec has to be an AVP Name, defined - ; in the base or extended Diameter - ; specifications. - - avp-name = avp-spec / "AVP" - ; The string "AVP" stands for *any* arbitrary AVP - ; Name, not otherwise listed in that command code - ; definition. Addition this AVP is recommended for - ; all command ABNFs to allow for extensibility. +Fajardo, et al. Standards Track [Page 38] + +RFC 6733 Diameter Base Protocol October 2012 - The following is a definition of a fictitious command code: + optional = [qual] "[" avp-name "]" + ; The avp-name in the 'optional' rule cannot + ; evaluate to any AVP Name that is included + ; in a fixed or required rule. The AVP can + ; appear anywhere in the message. + ; + ; NOTE: "[" and "]" have a slightly different + ; meaning than in ABNF. These braces + ; cannot be used to express optional fixed rules + ; (such as an optional ICV at the end). To do + ; this, the convention is '0*1fixed'. - Example-Request ::= < Diameter Header: 9999999, REQ, PXY > - { User-Name } - * { Origin-Host } - * [ AVP ] + qual = [min] "*" [max] + ; See ABNF conventions, RFC 5234, Section 4. + ; The absence of any qualifier depends on + ; whether it precedes a fixed, required, or + ; optional rule. If a fixed or required rule has + ; no qualifier, then exactly one such AVP MUST + ; be present. If an optional rule has no + ; qualifier, then 0 or 1 such AVP may be + ; present. If an optional rule has a qualifier, + ; then the value of min MUST be 0 if present. + min = 1*DIGIT + ; The minimum number of times the element may + ; be present. If absent, the default value is 0 + ; for fixed and optional rules and 1 for + ; required rules. The value MUST be at least 1 + ; for required rules. + max = 1*DIGIT + ; The maximum number of times the element may + ; be present. If absent, the default value is + ; infinity. A value of 0 implies the AVP MUST + ; NOT be present. + avp-spec = diameter-name + ; The avp-spec has to be an AVP Name, defined + ; in the base or extended Diameter + ; specifications. + avp-name = avp-spec / "AVP" + ; The string "AVP" stands for *any* arbitrary AVP + ; Name, not otherwise listed in that Command Code + ; definition. The inclusion of this string + ; is recommended for all CCFs to allow for + ; extensibility. -Fajardo, et al. Expires July 24, 2011 [Page 40] +Fajardo, et al. Standards Track [Page 39] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 + + + The following is a definition of a fictitious Command Code: + Example-Request ::= < Diameter Header: 9999999, REQ, PXY > + { User-Name } + 1* { Origin-Host } + * [ AVP ] 3.3. Diameter Command Naming Conventions Diameter command names typically includes one or more English words - followed by the verb Request or Answer. Each English word is + followed by the verb "Request" or "Answer". Each English word is delimited by a hyphen. A three-letter acronym for both the request and answer is also normally provided. @@ -2253,10 +2207,10 @@ Internet-Draft Diameter Base Protocol January 2011 the acronyms are STR and STA, respectively. Both the request and the answer for a given command share the same - command code. The request is identified by the R(equest) bit in the + Command Code. The request is identified by the R(equest) bit in the Diameter header set to one (1), to ask that a particular action be performed, such as authorizing a user or terminating a session. Once - the receiver has completed the request it issues the corresponding + the receiver has completed the request, it issues the corresponding answer, which includes a result code that communicates one of the following: @@ -2274,38 +2228,25 @@ Internet-Draft Diameter Base Protocol January 2011 Additional information, encoded within AVPs, may also be included in answer messages. +4. Diameter AVPs + Diameter AVPs carry specific authentication, accounting, + authorization, and routing information as well as configuration + details for the request and reply. - - - - - - - - - - - -Fajardo, et al. Expires July 24, 2011 [Page 41] +Fajardo, et al. Standards Track [Page 40] -Internet-Draft Diameter Base Protocol January 2011 - - -4. Diameter AVPs +RFC 6733 Diameter Base Protocol October 2012 - Diameter AVPs carry specific authentication, accounting, - authorization and routing information as well as configuration - details for the request and reply. Each AVP of type OctetString MUST be padded to align on a 32-bit boundary, while other AVP types align naturally. A number of zero- - valued bytes are added to the end of the AVP Data field till a word + valued bytes are added to the end of the AVP Data field until a word boundary is reached. The length of the padding is not reflected in the AVP Length field. @@ -2330,92 +2271,96 @@ Internet-Draft Diameter Base Protocol January 2011 The AVP Code, combined with the Vendor-Id field, identifies the attribute uniquely. AVP numbers 1 through 255 are reserved for - re-use of RADIUS attributes, without setting the Vendor-Id field. + reuse of RADIUS attributes, without setting the Vendor-Id field. AVP numbers 256 and above are used for Diameter, which are - allocated by IANA (see Section 11.1). - + allocated by IANA (see Section 11.1.1). AVP Flags The AVP Flags field informs the receiver how each attribute must - be handled. The 'r' (reserved) bits are unused and SHOULD be set - to 0. Note that subsequent Diameter applications MAY define - additional bits within the AVP Header, and an unrecognized bit - SHOULD be considered an error. The 'P' bit has been reserved for - future usage of end-to-end security. At the time of writing there - are no end-to-end security mechanisms specified therefore the 'P' - bit SHOULD be set to 0. + be handled. New Diameter applications SHOULD NOT define + additional AVP Flag bits. However, note that new Diameter + applications MAY define additional bits within the AVP header, and + an unrecognized bit SHOULD be considered an error. The sender of + the AVP MUST set 'R' (reserved) bits to 0 and the receiver SHOULD + ignore all 'R' (reserved) bits. The 'P' bit has been reserved for + future usage of end-to-end security. At the time of writing, + there are no end-to-end security mechanisms specified; therefore, + the 'P' bit SHOULD be set to 0. + + The 'M' bit, known as the Mandatory bit, indicates whether the + receiver of the AVP MUST parse and understand the semantics of the + AVP including its content. The receiving entity MUST return an + appropriate error message if it receives an AVP that has the M-bit -Fajardo, et al. Expires July 24, 2011 [Page 42] +Fajardo, et al. Standards Track [Page 41] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 - The 'M' Bit, known as the Mandatory bit, indicates whether the - receiver of the AVP MUST parse and understand the semantic of the - AVP including its content. The receiving entity MUST return an - appropriate error message if it receives an AVP that has the M-bit set but does not understand it. An exception applies when the AVP is embedded within a Grouped AVP. See Section 4.4 for details. - Diameter Relay and redirect agents MUST NOT reject messages with + Diameter relay and redirect agents MUST NOT reject messages with unrecognized AVPs. The 'M' bit MUST be set according to the rules defined in the - application specification which introduces or re-uses this AVP. - Within a given application, the M-bit setting for an AVP is either - defined for all command types or for each command type. + application specification that introduces or reuses this AVP. + Within a given application, the M-bit setting for an AVP is + defined either for all command types or for each command type. - AVPs with the 'M' bit cleared are informational only and a - receiver that receives a message with such an AVP that is not - supported, or whose value is not supported, MAY simply ignore the - AVP. + AVPs with the 'M' bit cleared are informational only; a receiver + that receives a message with such an AVP that is not supported, or + whose value is not supported, MAY simply ignore the AVP. The 'V' bit, known as the Vendor-Specific bit, indicates whether the optional Vendor-ID field is present in the AVP header. When - set the AVP Code belongs to the specific vendor code address + set, the AVP Code belongs to the specific vendor code address space. AVP Length The AVP Length field is three octets, and indicates the number of - octets in this AVP including the AVP Code, AVP Length, AVP Flags, - Vendor-ID field (if present) and the AVP data. If a message is - received with an invalid attribute length, the message MUST be - rejected. + octets in this AVP including the AVP Code field, AVP Length field, + AVP Flags field, Vendor-ID field (if present), and the AVP Data + field. If a message is received with an invalid attribute length, + the message MUST be rejected. 4.1.1. Optional Header Elements - The AVP Header contains one optional field. This field is only + The AVP header contains one optional field. This field is only present if the respective bit-flag is enabled. - Vendor-ID The Vendor-ID field is present if the 'V' bit is set in the AVP Flags field. The optional four-octet Vendor-ID field contains the - IANA assigned "SMI Network Management Private Enterprise Codes" - [RFC3232] value, encoded in network byte order. Any vendor or - standardization organization that are also treated like vendors in - the IANA managed "SMI Network Management Private Enterprise Codes" - space wishing to implement a vendor-specific Diameter AVP MUST use - their own Vendor-ID along with their privately managed AVP address + IANA-assigned "SMI Network Management Private Enterprise Codes" + [ENTERPRISE] value, encoded in network byte order. Any vendors or + standardization organizations that are also treated like vendors + in the IANA-managed "SMI Network Management Private Enterprise + Codes" space wishing to implement a vendor-specific Diameter AVP + MUST use their own Vendor-ID along with their privately managed + AVP address space, guaranteeing that they will not collide with + any other vendor's vendor-specific AVP(s) or with future IETF + AVPs. -Fajardo, et al. Expires July 24, 2011 [Page 43] - -Internet-Draft Diameter Base Protocol January 2011 - space, guaranteeing that they will not collide with any other - vendor's vendor-specific AVP(s), nor with future IETF AVPs. - A vendor ID value of zero (0) corresponds to the IETF adopted AVP - values, as managed by the IANA. Since the absence of the vendor - ID field implies that the AVP in question is not vendor specific, - implementations MUST NOT use the zero (0) vendor ID. +Fajardo, et al. Standards Track [Page 42] + +RFC 6733 Diameter Base Protocol October 2012 + + + A Vendor-ID value of zero (0) corresponds to the IETF-adopted AVP + values, as managed by IANA. Since the absence of the Vendor-ID + field implies that the AVP in question is not vendor specific, + implementations MUST NOT use the value of zero (0) for the + Vendor-ID field. 4.2. Basic AVP Data Formats @@ -2426,49 +2371,45 @@ Internet-Draft Diameter Base Protocol January 2011 type derived from the base data types. In the event that a new Basic AVP Data Format is needed, a new version of this RFC MUST be created. - OctetString The data contains arbitrary data of variable length. Unless otherwise noted, the AVP Length field MUST be set to at least 8 - (12 if the 'V' bit is enabled). AVP Values of this type that are - not a multiple of four-octets in length is followed by the - necessary padding so that the next AVP (if any) will start on a - 32-bit boundary. - + (12 if the 'V' bit is enabled). AVP values of this type that are + not a multiple of 4 octets in length are followed by the necessary + padding so that the next AVP (if any) will start on a 32-bit + boundary. Integer32 - 32 bit signed value, in network byte order. The AVP Length field + 32-bit signed value, in network byte order. The AVP Length field MUST be set to 12 (16 if the 'V' bit is enabled). - Integer64 - 64 bit signed value, in network byte order. The AVP Length field + 64-bit signed value, in network byte order. The AVP Length field MUST be set to 16 (20 if the 'V' bit is enabled). - Unsigned32 - 32 bit unsigned value, in network byte order. The AVP Length + 32-bit unsigned value, in network byte order. The AVP Length field MUST be set to 12 (16 if the 'V' bit is enabled). + Unsigned64 + 64-bit unsigned value, in network byte order. The AVP Length + field MUST be set to 16 (20 if the 'V' bit is enabled). -Fajardo, et al. Expires July 24, 2011 [Page 44] - -Internet-Draft Diameter Base Protocol January 2011 - Unsigned64 - 64 bit unsigned value, in network byte order. The AVP Length - field MUST be set to 16 (20 if the 'V' bit is enabled). +Fajardo, et al. Standards Track [Page 43] + +RFC 6733 Diameter Base Protocol October 2012 Float32 @@ -2478,7 +2419,6 @@ Internet-Draft Diameter Base Protocol January 2011 network byte order. The AVP Length field MUST be set to 12 (16 if the 'V' bit is enabled). - Float64 This represents floating point values of double precision as @@ -2486,73 +2426,69 @@ Internet-Draft Diameter Base Protocol January 2011 network byte order. The AVP Length field MUST be set to 16 (20 if the 'V' bit is enabled). - Grouped - The Data field is specified as a sequence of AVPs. Each of these - AVPs follows - in the order in which they are specified - - including their headers and padding. The AVP Length field is set - to 8 (12 if the 'V' bit is enabled) plus the total length of all - included AVPs, including their headers and padding. Thus the AVP - length field of an AVP of type Grouped is always a multiple of 4. - + The Data field is specified as a sequence of AVPs. These AVPs are + concatenated -- including their headers and padding -- in the + order in which they are specified and the result encapsulated in + the Data field. The AVP Length field is set to 8 (12 if the 'V' + bit is enabled) plus the total length of all included AVPs, + including their headers and padding. Thus, the AVP Length field + of an AVP of type Grouped is always a multiple of 4. 4.3. Derived AVP Data Formats In addition to using the Basic AVP Data Formats, applications may define data formats derived from the Basic AVP Data Formats. An application that defines new Derived AVP Data Formats MUST include - them in a section entitled "Derived AVP Data Formats", using the same + them in a section titled "Derived AVP Data Formats", using the same format as the definitions below. Each new definition MUST be either defined or listed with a reference to the RFC that defines the format. -4.3.1. Common Derived AVPs +4.3.1. Common Derived AVP Data Formats The following are commonly used Derived AVP Data Formats. + Address + The Address format is derived from the OctetString Basic AVP + Format. It is a discriminated union representing, for example, a + 32-bit (IPv4) [RFC0791] or 128-bit (IPv6) [RFC4291] address, most + significant octet first. The first two octets of the Address AVP + represent the AddressType, which contains an Address Family, + defined in [IANAADFAM]. The AddressType is used to discriminate + the content and format of the remaining octets. -Fajardo, et al. Expires July 24, 2011 [Page 45] +Fajardo, et al. Standards Track [Page 44] -Internet-Draft Diameter Base Protocol January 2011 - - - Address - - The Address format is derived from the OctetString AVP Base - Format. It is a discriminated union, representing, for example a - 32-bit (IPv4) [RFC791] or 128-bit (IPv6) [RFC4291] address, most - significant octet first. The first two octets of the Address AVP - represents the AddressType, which contains an Address Family - defined in [IANAADFAM]. The AddressType is used to discriminate - the content and format of the remaining octets. +RFC 6733 Diameter Base Protocol October 2012 Time - The Time format is derived from the OctetString AVP Base Format. + The Time format is derived from the OctetString Basic AVP Format. The string MUST contain four octets, in the same format as the first four bytes are in the NTP timestamp format. The NTP - Timestamp format is defined in Chapter 3 of [RFC5905]. + timestamp format is defined in Section 3 of [RFC5905]. This represents the number of seconds since 0h on 1 January 1900 with respect to the Coordinated Universal Time (UTC). - On 6h 28m 16s UTC, 7 February 2036 the time value will overflow. - SNTP [RFC5905] describes a procedure to extend the time to 2104. - This procedure MUST be supported by all Diameter nodes. - + On 6h 28m 16s UTC, 7 February 2036, the time value will overflow. + Simple Network Time Protocol (SNTP) [RFC5905] describes a + procedure to extend the time to 2104. This procedure MUST be + supported by all Diameter nodes. UTF8String - The UTF8String format is derived from the OctetString AVP Base - Format. This is a human readable string represented using the + The UTF8String format is derived from the OctetString Basic AVP + Format. This is a human-readable string represented using the ISO/IEC IS 10646-1 character set, encoded as an OctetString using - the UTF-8 [RFC3629] transformation format described in RFC 3629. + the UTF-8 transformation format [RFC3629]. Since additional code points are added by amendments to the 10646 standard from time to time, implementations MUST be prepared to @@ -2570,78 +2506,79 @@ Internet-Draft Diameter Base Protocol January 2011 or software, an alternative means of entry and display, such as hexadecimal, MAY be provided. - - -Fajardo, et al. Expires July 24, 2011 [Page 46] - -Internet-Draft Diameter Base Protocol January 2011 - - For information encoded in 7-bit US-ASCII, the UTF-8 charset is identical to the US-ASCII charset. UTF-8 may require multiple bytes to represent a single character / - code point; thus the length of an UTF8String in octets may be + code point; thus, the length of a UTF8String in octets may be different from the number of characters encoded. Note that the AVP Length field of an UTF8String is measured in - octets, not characters. + octets not characters. + + + + +Fajardo, et al. Standards Track [Page 45] + +RFC 6733 Diameter Base Protocol October 2012 + DiameterIdentity - The DiameterIdentity format is derived from the OctetString AVP - Base Format. + The DiameterIdentity format is derived from the OctetString Basic + AVP Format. DiameterIdentity = FQDN/Realm - - DiameterIdentity value is used to uniquely identify either: + The DiameterIdentity value is used to uniquely identify either: * A Diameter node for purposes of duplicate connection and routing loop detection. - * A Realm to determine whether messages can be satisfied locally, + * A Realm to determine whether messages can be satisfied locally or whether they must be routed or redirected. + When a DiameterIdentity value is used to identify a Diameter node, + the contents of the string MUST be the Fully Qualified Domain Name + (FQDN) of the Diameter node. If multiple Diameter nodes run on + the same host, each Diameter node MUST be assigned a unique + DiameterIdentity. If a Diameter node can be identified by several + FQDNs, a single FQDN should be picked at startup and used as the + only DiameterIdentity for that node, whatever the connection on + which it is sent. In this document, note that DiameterIdentity is + in ASCII form in order to be compatible with existing DNS + infrastructure. See Appendix D for interactions between the + Diameter protocol and Internationalized Domain Names (IDNs). - When a DiameterIdentity is used to identify a Diameter node the - contents of the string MUST be the FQDN of the Diameter node. If - multiple Diameter nodes run on the same host, each Diameter node - MUST be assigned a unique DiameterIdentity. If a Diameter node - can be identified by several FQDNs, a single FQDN should be picked - at startup, and used as the only DiameterIdentity for that node, - whatever the connection it is sent on. Note that in this - document, DiameterIdentity is in ASCII form in order to be - compatible with existing DNS infrastructure. See Appendix D for - interactions between the Diameter protocol and Internationalized - Domain Name (IDNs). + DiameterURI + The DiameterURI MUST follow the Uniform Resource Identifiers (RFC + 3986) syntax [RFC3986] rules specified below: - DiameterURI + "aaa://" FQDN [ port ] [ transport ] [ protocol ] - The DiameterURI MUST follow the Uniform Resource Identifiers (URI) - syntax [RFC3986] rules specified below: + ; No transport security + "aaas://" FQDN [ port ] [ transport ] [ protocol ] + ; Transport security used + FQDN = < Fully Qualified Domain Name > -Fajardo, et al. Expires July 24, 2011 [Page 47] - -Internet-Draft Diameter Base Protocol January 2011 - "aaa://" FQDN [ port ] [ transport ] [ protocol ] - ; No transport security - "aaas://" FQDN [ port ] [ transport ] [ protocol ] - ; Transport security used - FQDN = Fully Qualified Host Name +Fajardo, et al. Standards Track [Page 46] + +RFC 6733 Diameter Base Protocol October 2012 + port = ":" 1*DIGIT @@ -2649,8 +2586,9 @@ Internet-Draft Diameter Base Protocol January 2011 ; incoming connections. ; If absent, the default Diameter port ; (3868) is assumed if no transport - ; security is used and port (TBD) when - ; transport security (TLS/TCP and DTLS/SCTP) is used. + ; security is used and port 5658 when + ; transport security (TLS/TCP and DTLS/SCTP) + ; is used. transport = ";transport=" transport-protocol @@ -2660,46 +2598,47 @@ Internet-Draft Diameter Base Protocol January 2011 ; UDP MUST NOT be used when the aaa-protocol ; field is set to diameter. - transport-protocol = ( "tcp" / "sctp" / "udp" ) + transport-protocol = ( "tcp" / "sctp" / "udp" ) - protocol = ";protocol=" aaa-protocol + protocol = ";protocol=" aaa-protocol ; If absent, the default AAA protocol ; is Diameter. - aaa-protocol = ( "diameter" / "radius" / "tacacs+" ) + aaa-protocol = ( "diameter" / "radius" / "tacacs+" ) - The following are examples of valid Diameter host identities: + The following are examples of valid Diameter host identities: - aaa://host.example.com;transport=tcp - aaa://host.example.com:6666;transport=tcp - aaa://host.example.com;protocol=diameter - aaa://host.example.com:6666;protocol=diameter - aaa://host.example.com:6666;transport=tcp;protocol=diameter - aaa://host.example.com:1813;transport=udp;protocol=radius + aaa://host.example.com;transport=tcp + aaa://host.example.com:6666;transport=tcp + aaa://host.example.com;protocol=diameter + aaa://host.example.com:6666;protocol=diameter + aaa://host.example.com:6666;transport=tcp;protocol=diameter + aaa://host.example.com:1813;transport=udp;protocol=radius + Enumerated + The Enumerated format is derived from the Integer32 Basic AVP + Format. The definition contains a list of valid values and their + interpretation and is described in the Diameter application + introducing the AVP. -Fajardo, et al. Expires July 24, 2011 [Page 48] - -Internet-Draft Diameter Base Protocol January 2011 - Enumerated - Enumerated is derived from the Integer32 AVP Base Format. The - definition contains a list of valid values and their - interpretation and is described in the Diameter application - introducing the AVP. + +Fajardo, et al. Standards Track [Page 47] + +RFC 6733 Diameter Base Protocol October 2012 IPFilterRule - The IPFilterRule format is derived from the OctetString AVP Base + The IPFilterRule format is derived from the OctetString Basic AVP Format and uses the ASCII charset. The rule syntax is a modified subset of ipfw(8) from FreeBSD. Packets may be filtered based on the following information that is associated with it: @@ -2713,13 +2652,13 @@ Internet-Draft Diameter Base Protocol January 2011 IP options ICMP types - Rules for the appropriate direction are evaluated in order, with - the first matched rule terminating the evaluation. Each packet is - evaluated once. If no rule matches, the packet is dropped if the - last rule evaluated was a permit, and passed if the last rule was - a deny. + Rules for the appropriate direction are evaluated in order, with the + first matched rule terminating the evaluation. Each packet is + evaluated once. If no rule matches, the packet is dropped if the + last rule evaluated was a permit, and passed if the last rule was a + deny. - IPFilterRule filters MUST follow the format: + IPFilterRule filters MUST follow the format: action dir proto from src to dst [options] @@ -2737,22 +2676,28 @@ Internet-Draft Diameter Base Protocol January 2011 The <address/mask> may be specified as: ipno An IPv4 or IPv6 number in dotted- quad or canonical IPv6 form. Only + this exact IP number will match the + rule. + + + + + + -Fajardo, et al. Expires July 24, 2011 [Page 49] +Fajardo, et al. Standards Track [Page 48] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 - this exact IP number will match the - rule. ipno/bits An IP number as above with a mask width of the form 192.0.2.10/24. In this case, all IP numbers from 192.0.2.0 to 192.0.2.255 will match. The bit width MUST be valid for the - IP version and the IP number MUST + IP version, and the IP number MUST NOT have bits set beyond the mask. For a match to occur, the same IP version must be present in the @@ -2765,7 +2710,7 @@ Internet-Draft Diameter Base Protocol January 2011 is the address or set of addresses assigned to the terminal. For IPv4, a typical first rule is often "deny - in ip! assigned" + in ip! assigned". The sense of the match can be inverted by preceding an address with the not modifier (!), @@ -2773,7 +2718,7 @@ Internet-Draft Diameter Base Protocol January 2011 instead. This does not affect the selection of port numbers. - With the TCP, UDP and SCTP protocols, optional + With the TCP, UDP, and SCTP protocols, optional ports may be specified as: {port/port-port}[,ports[,...]] @@ -2796,33 +2741,35 @@ Internet-Draft Diameter Base Protocol January 2011 -Fajardo, et al. Expires July 24, 2011 [Page 50] + + +Fajardo, et al. Standards Track [Page 49] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 - ipoptions spec - Match if the IP header contains the comma - separated list of options specified in spec. The + ipoptions spec + Match if the IP header contains the comma-separated + list of options specified in spec. The supported IP options are: ssrr (strict source route), lsrr (loose source - route), rr (record packet route) and ts + route), rr (record packet route), and ts (timestamp). The absence of a particular option may be denoted with a '!'. tcpoptions spec - Match if the TCP header contains the comma - separated list of options specified in spec. The + Match if the TCP header contains the comma-separated + list of options specified in spec. The supported TCP options are: mss (maximum segment size), window (tcp window advertisement), sack (selective ack), ts (rfc1323 - timestamp) and cc (rfc1644 t/tcp connection + timestamp), and cc (rfc1644 t/tcp connection count). The absence of a particular option may be denoted with a '!'. - established + established TCP packets only. Match packets that have the RST or ACK bits set. @@ -2832,10 +2779,10 @@ Internet-Draft Diameter Base Protocol January 2011 tcpflags spec TCP packets only. Match if the TCP header - contains the comma separated list of flags + contains the comma-separated list of flags specified in spec. The supported TCP flags are: - fin, syn, rst, psh, ack and urg. The absence of a + fin, syn, rst, psh, ack, and urg. The absence of a particular flag may be denoted with a '!'. A rule that contains a tcpflags specification can never match a fragmented packet that has a non-zero @@ -2852,9 +2799,9 @@ Internet-Draft Diameter Base Protocol January 2011 -Fajardo, et al. Expires July 24, 2011 [Page 51] +Fajardo, et al. Standards Track [Page 50] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 echo reply (0), destination unreachable (3), @@ -2863,21 +2810,20 @@ Internet-Draft Diameter Base Protocol January 2011 solicitation (10), time-to-live exceeded (11), IP header bad (12), timestamp request (13), timestamp reply (14), information request (15), - information reply (16), address mask request (17) + information reply (16), address mask request (17), and address mask reply (18). - There is one kind of packet that the access device MUST always - discard, that is an IP fragment with a fragment offset of one. - This is a valid packet, but it only has one use, to try to - circumvent firewalls. - - An access device that is unable to interpret or apply a deny rule - MUST terminate the session. An access device that is unable to - interpret or apply a permit rule MAY apply a more restrictive - rule. An access device MAY apply deny rules of its own before the - supplied rules, for example to protect the access device owner's - infrastructure. + There is one kind of packet that the access device MUST always + discard, that is an IP fragment with a fragment offset of one. This + is a valid packet, but it only has one use, to try to circumvent + firewalls. + An access device that is unable to interpret or apply a deny rule + MUST terminate the session. An access device that is unable to + interpret or apply a permit rule MAY apply a more restrictive rule. + An access device MAY apply deny rules of its own before the supplied + rules, for example to protect the access device owner's + infrastructure. 4.4. Grouped AVP Values @@ -2885,75 +2831,76 @@ Internet-Draft Diameter Base Protocol January 2011 implies that the Data field is actually a sequence of AVPs. It is possible to include an AVP with a Grouped type within a Grouped type, that is, to nest them. AVPs within an AVP of type Grouped have the - same padding requirements as non-Grouped AVPs, as defined in Section - 4. + same padding requirements as non-Grouped AVPs, as defined in + Section 4.4. The AVP Code numbering space of all AVPs included in a Grouped AVP is - the same as for non-grouped AVPs. Receivers of a Grouped AVP that + the same as for non-Grouped AVPs. Receivers of a Grouped AVP that does not have the 'M' (mandatory) bit set and one or more of the encapsulated AVPs within the group has the 'M' (mandatory) bit set MAY simply be ignored if the Grouped AVP itself is unrecognized. The rule applies even if the encapsulated AVP with its 'M' (mandatory) - bit set is further encapsulated within other sub-groups; i.e. other + bit set is further encapsulated within other sub-groups, i.e., other Grouped AVPs embedded within the Grouped AVP. - Every Grouped AVP defined MUST include a corresponding grammar, using - ABNF [RFC5234] (with modifications), as defined below. - + Every Grouped AVP definition MUST include a corresponding grammar, + using ABNF [RFC5234] (with modifications), as defined below. + grouped-avp-def = "<" name ">" "::=" avp + name-fmt = ALPHA *(ALPHA / DIGIT / "-") -Fajardo, et al. Expires July 24, 2011 [Page 52] +Fajardo, et al. Standards Track [Page 51] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 - grouped-avp-def = <name> "::=" avp - - name-fmt = ALPHA *(ALPHA / DIGIT / "-") - name = name-fmt ; The name has to be the name of an AVP, ; defined in the base or extended Diameter ; specifications. - avp = header [ *fixed] [ *required] [ *optional] + avp = header *fixed *required *optional header = "<" "AVP-Header:" avpcode [vendor] ">" avpcode = 1*DIGIT - ; The AVP Code assigned to the Grouped AVP + ; The AVP Code assigned to the Grouped AVP. vendor = 1*DIGIT ; The Vendor-ID assigned to the Grouped AVP. ; If absent, the default value of zero is ; used. -4.4.1. Example AVP with a Grouped Data type +4.4.1. Example AVP with a Grouped Data Type The Example-AVP (AVP Code 999999) is of type Grouped and is used to clarify how Grouped AVP values work. The Grouped Data field has the - following ABNF grammar: - - - - - - - - + following CCF grammar: + Example-AVP ::= < AVP Header: 999999 > + { Origin-Host } + 1*{ Session-Id } + *[ AVP ] + An Example-AVP with Grouped Data follows. + The Origin-Host AVP (Section 6.3) is required. In this case: + Origin-Host = "example.com". + One or more Session-Ids must follow. Here there are two: + Session-Id = + "grump.example.com:33041;23432;893;0AF3B81" + Session-Id = + "grump.example.com:33054;23561;2358;0AF3B82" @@ -2964,31 +2911,11 @@ Internet-Draft Diameter Base Protocol January 2011 -Fajardo, et al. Expires July 24, 2011 [Page 53] +Fajardo, et al. Standards Track [Page 52] -Internet-Draft Diameter Base Protocol January 2011 - - - Example-AVP ::= < AVP Header: 999999 > - { Origin-Host } - 1*{ Session-Id } - *[ AVP ] - - An Example-AVP with Grouped Data follows. - - The Origin-Host AVP is required (Section 6.3). In this case: - - Origin-Host = "example.com". +RFC 6733 Diameter Base Protocol October 2012 - One or more Session-Ids must follow. Here there are two: - - Session-Id = - "grump.example.com:33041;23432;893;0AF3B81" - - Session-Id = - "grump.example.com:33054;23561;2358;0AF3B82" - optional AVPs included are Recovery-Policy = <binary> @@ -3007,25 +2934,42 @@ Internet-Draft Diameter Base Protocol January 2011 41d018d56fe938f3cbf089aac12a912a2f0d1923a9390e5f789cb2e5067 d3427475e49968f841 - The data for the optional AVPs is represented in hex since the format - of these AVPs is neither known at the time of definition of the - Example-AVP group, nor (likely) at the time when the example instance - of this AVP is interpreted - except by Diameter implementations which - support the same set of AVPs. The encoding example illustrates how - padding is used and how length fields are calculated. Also note that - AVPs may be present in the Grouped AVP value which the receiver - cannot interpret (here, the Recover-Policy and Futuristic-Acct-Record - AVPs). The length of the Example-AVP is the sum of all the length of - the member AVPs including their padding plus the Example-AVP header + The data for the optional AVPs is represented in hexadecimal form + since the format of these AVPs is not known at the time of definition + of the Example-AVP group nor (likely) at the time when the example + instance of this AVP is interpreted -- except by Diameter + implementations that support the same set of AVPs. The encoding + example illustrates how padding is used and how length fields are + calculated. Also, note that AVPs may be present in the Grouped AVP + value that the receiver cannot interpret (here, the Recover-Policy + and Futuristic-Acct-Record AVPs). The length of the Example-AVP is + the sum of all the length of the member AVPs, including their + padding, plus the Example-AVP header size. + + + + + + + + + + + + + + + + -Fajardo, et al. Expires July 24, 2011 [Page 54] - -Internet-Draft Diameter Base Protocol January 2011 - size. + +Fajardo, et al. Standards Track [Page 53] + +RFC 6733 Diameter Base Protocol October 2012 This AVP would be encoded as follows: @@ -3076,15 +3020,18 @@ Internet-Draft Diameter Base Protocol January 2011 -Fajardo, et al. Expires July 24, 2011 [Page 55] + + + +Fajardo, et al. Standards Track [Page 54] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 4.5. Diameter Base Protocol AVPs The following table describes the Diameter AVPs defined in the base - protocol, their AVP Code values, types, possible flag values. + protocol, their AVP Code values, types, and possible flag values. Due to space constraints, the short form DiamIdent is used to represent DiameterIdentity. @@ -3132,9 +3079,9 @@ Internet-Draft Diameter Base Protocol January 2011 -Fajardo, et al. Expires July 24, 2011 [Page 56] +Fajardo, et al. Standards Track [Page 55] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 +----------+ @@ -3154,7 +3101,7 @@ Internet-Draft Diameter Base Protocol January 2011 Record-Number | | | Accounting- 480 9.8.1 Enumerated | M | V | Record-Type | | | - Accounting- 44 9.8.4 OctetString| M | V | + Acct- 44 9.8.4 OctetString| M | V | Session-Id | | | Accounting- 287 9.8.6 Unsigned64 | M | V | Sub-Session-Id | | | @@ -3188,9 +3135,9 @@ Internet-Draft Diameter Base Protocol January 2011 -Fajardo, et al. Expires July 24, 2011 [Page 57] +Fajardo, et al. Standards Track [Page 56] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 +----------+ @@ -3244,9 +3191,9 @@ Internet-Draft Diameter Base Protocol January 2011 -Fajardo, et al. Expires July 24, 2011 [Page 58] +Fajardo, et al. Standards Track [Page 57] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 5. Diameter Peers @@ -3258,25 +3205,25 @@ Internet-Draft Diameter Base Protocol January 2011 Connections between diameter peers are established using their valid DiameterIdentity. A Diameter node initiating a connection to a peer - MUST know the peers DiameterIdentity. Methods for discovering a + MUST know the peer's DiameterIdentity. Methods for discovering a Diameter peer can be found in Section 5.2. - Although a Diameter node may have many possible peers that it is able - to communicate with, it may not be economical to have an established - connection to all of them. At a minimum, a Diameter node SHOULD have - an established connection with two peers per realm, known as the - primary and secondary peers. Of course, a node MAY have additional - connections, if it is deemed necessary. Typically, all messages for - a realm are sent to the primary peer, but in the event that failover - procedures are invoked, any pending requests are sent to the - secondary peer. However, implementations are free to load balance - requests between a set of peers. - - Note that a given peer MAY act as a primary for a given realm, while + Although a Diameter node may have many possible peers with which it + is able to communicate, it may not be economical to have an + established connection to all of them. At a minimum, a Diameter node + SHOULD have an established connection with two peers per realm, known + as the primary and secondary peers. Of course, a node MAY have + additional connections, if it is deemed necessary. Typically, all + messages for a realm are sent to the primary peer but, in the event + that failover procedures are invoked, any pending requests are sent + to the secondary peer. However, implementations are free to load + balance requests between a set of peers. + + Note that a given peer MAY act as a primary for a given realm while acting as a secondary for another realm. When a peer is deemed suspect, which could occur for various reasons, - including not receiving a DWA within an allotted timeframe, no new + including not receiving a DWA within an allotted time frame, no new requests should be forwarded to the peer, but failover procedures are invoked. When an active peer is moved to this mode, additional connections SHOULD be established to ensure that the necessary number @@ -3284,15 +3231,14 @@ Internet-Draft Diameter Base Protocol January 2011 There are two ways that a peer is removed from the suspect peer list: - 1. The peer is no longer reachable, causing the transport connection - to be shutdown. The peer is moved to the closed state. + to be shut down. The peer is moved to the closed state. - 2. Three watchdog messages are exchanged with accepted round trip + 2. Three watchdog messages are exchanged with accepted round-trip times, and the connection to the peer is considered stabilized. In the event the peer being removed is either the primary or - secondary, an alternate peer SHOULD replace the deleted peer, and + secondary, an alternate peer SHOULD replace the deleted peer and assume the role of either primary or secondary. @@ -3300,99 +3246,106 @@ Internet-Draft Diameter Base Protocol January 2011 -Fajardo, et al. Expires July 24, 2011 [Page 59] + +Fajardo, et al. Standards Track [Page 58] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 5.2. Diameter Peer Discovery - Allowing for dynamic Diameter agent discovery will make it possible - for simpler and more robust deployment of Diameter services. In - order to promote interoperable implementations of Diameter peer - discovery, the following mechanisms are described. These are based - on existing IETF standards. The first option (manual configuration) - MUST be supported by all Diameter nodes, while the latter option - (DNS) MAY be supported. + Allowing for dynamic Diameter agent discovery makes possible simpler + and more robust deployment of Diameter services. In order to promote + interoperable implementations of Diameter peer discovery, the + following mechanisms (manual configuration and DNS) are described. + These are based on existing IETF standards. Both mechanisms MUST be + supported by all Diameter implementations; either MAY be used. There are two cases where Diameter peer discovery may be performed. The first is when a Diameter client needs to discover a first-hop Diameter agent. The second case is when a Diameter agent needs to - discover another agent - for further handling of a Diameter - operation. In both cases, the following 'search order' is - recommended: - + discover another agent for further handling of a Diameter operation. + In both cases, the following 'search order' is recommended: - 1. The Diameter implementation consults its list of static + 1. The Diameter implementation consults its list of statically (manually) configured Diameter agent locations. These will be used if they exist and respond. - 2. The Diameter implementation performs a NAPTR query for a server - in a particular realm. The Diameter implementation has to know - in advance which realm to look for a Diameter agent. This could - be deduced, for example, from the 'realm' in a NAI that a - Diameter implementation needed to perform a Diameter operation - on. + in a particular realm. The Diameter implementation has to know, + in advance, in which realm to look for a Diameter agent. This + could be deduced, for example, from the 'realm' in an NAI on + which a Diameter implementation needed to perform a Diameter + operation. The NAPTR usage in Diameter follows the S-NAPTR DDDS application [RFC3958] in which the SERVICE field includes tags for the desired application and supported application protocol. The application service tag for a Diameter application is 'aaa' and the supported application protocol tags are 'diameter.tcp', - 'diameter.sctp', 'diameter.dtls' or 'diameter.tls.tcp'. + 'diameter.sctp', 'diameter.dtls', or 'diameter.tls.tcp' + [RFC6408]. The client can follow the resolution process defined by the - S-NAPTR DDDS [RFC3958] application to find a matching SRV, A or + S-NAPTR DDDS [RFC3958] application to find a matching SRV, A, or AAAA record of a suitable peer. The domain suffixes in the NAPTR replacement field SHOULD match the domain of the original query. An example can be found in Appendix B. 3. If no NAPTR records are found, the requester directly queries for - SRV records '_diameter._sctp'.realm, '_diameter._dtls'.realm, - '_diameter._tcp'.realm and '_diameter._tls'.realm depending on - the requesters network protocol capabilities. If SRV records are - found then the requester can perform address record query (A RR's + one of the following SRV records: for Diameter over TCP, use + "_diameter._tcp.realm"; for Diameter over TLS, use + "_diameters._tcp.realm"; for Diameter over SCTP, use + "_diameter._sctp.realm"; for Diameter over DTLS, use + "_diameters._sctp.realm". If SRV records are found, then the + requester can perform address record query (A RR's and/or AAAA + -Fajardo, et al. Expires July 24, 2011 [Page 60] +Fajardo, et al. Standards Track [Page 59] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 - and/or AAAA RR's) for the target hostname specified in the SRV - records. If no SRV records are found, the requester gives up. + RR's) for the target hostname specified in the SRV records + following the rules given in [RFC2782]. If no SRV records are + found, the requester gives up. If the server is using a site certificate, the domain name in the NAPTR query and the domain name in the replacement field MUST both be valid based on the site certificate handed out by the server in the - TLS/TCP and DTLS/SCTP or IKE exchange. Similarly, the domain name in - the SRV query and the domain name in the target in the SRV record - MUST both be valid based on the same site certificate. Otherwise, an - attacker could modify the DNS records to contain replacement values - in a different domain, and the client could not validate that this - was the desired behavior, or the result of an attack. - - Also, the Diameter Peer MUST check to make sure that the discovered + TLS/TCP and DTLS/SCTP or Internet Key Exchange Protocol (IKE) + exchange. Similarly, the domain name in the SRV query and the domain + name in the target in the SRV record MUST both be valid based on the + same site certificate. Otherwise, an attacker could modify the DNS + records to contain replacement values in a different domain, and the + client could not validate whether this was the desired behavior or + the result of an attack. + + Also, the Diameter peer MUST check to make sure that the discovered peers are authorized to act in its role. Authentication via IKE or TLS/TCP and DTLS/SCTP, or validation of DNS RRs via DNSSEC is not sufficient to conclude this. For example, a web server may have obtained a valid TLS/TCP and DTLS/SCTP certificate, and secured RRs may be included in the DNS, but this does not imply that it is - authorized to act as a Diameter Server. - - Authorization can be achieved for example, by configuration of a - Diameter Server CA. Alternatively this can be achieved by definition - of OIDs within TLS/TCP and DTLS/SCTP or IKE certificates so as to - signify Diameter Server authorization. - - A dynamically discovered peer causes an entry in the Peer Table (see + authorized to act as a Diameter server. + + Authorization can be achieved, for example, by the configuration of a + Diameter server Certification Authority (CA). The server CA issues a + certificate to the Diameter server, which includes an Object + Identifier (OID) to indicate the subject is a Diameter server in the + Extended Key Usage extension [RFC5280]. This certificate is then + used during TLS/TCP, DTLS/SCTP, or IKE security negotiation. + However, note that, at the time of writing, no Diameter server + Certification Authorities exist. + + A dynamically discovered peer causes an entry in the peer table (see Section 2.6) to be created. Note that entries created via DNS MUST - expire (or be refreshed) within the DNS TTL. If a peer is discovered - outside of the local realm, a routing table entry (see Section 2.7) - for the peer's realm is created. The routing table entry's - expiration MUST match the peer's expiration value. + expire (or be refreshed) within the DNS Time to Live (TTL). If a + peer is discovered outside of the local realm, a routing table entry + (see Section 2.7) for the peer's realm is created. The routing table + entry's expiration MUST match the peer's expiration value. 5.3. Capabilities Exchange @@ -3400,35 +3353,36 @@ Internet-Draft Diameter Base Protocol January 2011 exchange the Capabilities Exchange messages, as specified in the peer state machine (see Section 5.6). This message allows the discovery of a peer's identity and its capabilities (protocol version number, - supported Diameter applications, security mechanisms, etc.) + the identifiers of supported Diameter applications, security + mechanisms, etc.). - The receiver only issues commands to its peers that have advertised - support for the Diameter application that defines the command. A - Diameter node MUST cache the supported applications in order to - ensure that unrecognized commands and/or AVPs are not unnecessarily - sent to a peer. - - A receiver of a Capabilities-Exchange-Req (CER) message that does not -Fajardo, et al. Expires July 24, 2011 [Page 61] +Fajardo, et al. Standards Track [Page 60] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 - have any applications in common with the sender MUST return a + The receiver only issues commands to its peers that have advertised + support for the Diameter application that defines the command. A + Diameter node MUST cache the supported Application Ids in order to + ensure that unrecognized commands and/or AVPs are not unnecessarily + sent to a peer. + + A receiver of a Capabilities-Exchange-Request (CER) message that does + not have any applications in common with the sender MUST return a Capabilities-Exchange-Answer (CEA) with the Result-Code AVP set to - DIAMETER_NO_COMMON_APPLICATION, and SHOULD disconnect the transport + DIAMETER_NO_COMMON_APPLICATION and SHOULD disconnect the transport layer connection. Note that receiving a CER or CEA from a peer - advertising itself as a Relay (see Section 2.4) MUST be interpreted + advertising itself as a relay (see Section 2.4) MUST be interpreted as having common applications with the peer. The receiver of the Capabilities-Exchange-Request (CER) MUST determine common applications by computing the intersection of its - own set of supported Application Id against all of the application - identifier AVPs (Auth-Application-Id, Acct-Application-Id and Vendor- - Specific-Application-Id) present in the CER. The value of the + own set of supported Application Ids against all of the + Application-Id AVPs (Auth-Application-Id, Acct-Application-Id, and + Vendor-Specific-Application-Id) present in the CER. The value of the Vendor-Id AVP in the Vendor-Specific-Application-Id MUST NOT be used during computation. The sender of the Capabilities-Exchange-Answer (CEA) SHOULD include all of its supported applications as a hint to @@ -3438,12 +3392,13 @@ Internet-Draft Diameter Base Protocol January 2011 and DTLS/SCTP connection prior to the CER/CEA exchange. This protects the capabilities information of both peers. To support older Diameter implementations that do not fully conform to this - document, the transport security MAY still be negotiated via Inband- - Security AVP. In this case, the receiver of a Capabilities-Exchange- - Req (CER) message that does not have any security mechanisms in - common with the sender MUST return a Capabilities-Exchange-Answer - (CEA) with the Result-Code AVP set to DIAMETER_NO_COMMON_SECURITY, - and SHOULD disconnect the transport layer connection. + document, the transport security MAY still be negotiated via an + Inband-Security AVP. In this case, the receiver of a Capabilities- + Exchange-Request (CER) message that does not have any security + mechanisms in common with the sender MUST return a Capabilities- + Exchange-Answer (CEA) with the Result-Code AVP set to + DIAMETER_NO_COMMON_SECURITY and SHOULD disconnect the transport layer + connection. CERs received from unknown peers MAY be silently discarded, or a CEA MAY be issued with the Result-Code AVP set to DIAMETER_UNKNOWN_PEER. @@ -3455,34 +3410,34 @@ Internet-Draft Diameter Base Protocol January 2011 failure, all the pending transactions destined to the unknown peer can be discarded. - The CER and CEA messages MUST NOT be proxied, redirected or relayed. + The CER and CEA messages MUST NOT be proxied, redirected, or relayed. - Since the CER/CEA messages cannot be proxied, it is still possible - that an upstream agent receives a message for which it has no - available peers to handle the application that corresponds to the - Command-Code. In such instances, the 'E' bit is set in the answer - message (see Section 7.) with the Result-Code AVP set to - DIAMETER_UNABLE_TO_DELIVER to inform the downstream to take action - (e.g., re-routing request to an alternate peer). - -Fajardo, et al. Expires July 24, 2011 [Page 62] +Fajardo, et al. Standards Track [Page 61] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 + Since the CER/CEA messages cannot be proxied, it is still possible + that an upstream agent will receive a message for which it has no + available peers to handle the application that corresponds to the + Command Code. In such instances, the 'E' bit is set in the answer + message (Section 7) with the Result-Code AVP set to + DIAMETER_UNABLE_TO_DELIVER to inform the downstream agent to take + action (e.g., re-routing request to an alternate peer). + With the exception of the Capabilities-Exchange-Request message, a message of type Request that includes the Auth-Application-Id or Acct-Application-Id AVPs, or a message with an application-specific - command code, MAY only be forwarded to a host that has explicitly + Command Code MAY only be forwarded to a host that has explicitly advertised support for the application (or has advertised the Relay Application Id). 5.3.1. Capabilities-Exchange-Request - The Capabilities-Exchange-Request (CER), indicated by the Command- + The Capabilities-Exchange-Request (CER), indicated by the Command Code set to 257 and the Command Flags' 'R' bit set, is sent to exchange local capabilities. Upon detection of a transport failure, this message MUST NOT be sent to an alternate peer. @@ -3490,7 +3445,7 @@ Internet-Draft Diameter Base Protocol January 2011 When Diameter is run over SCTP [RFC4960] or DTLS/SCTP [RFC6083], which allow for connections to span multiple interfaces and multiple IP addresses, the Capabilities-Exchange-Request message MUST contain - one Host-IP- Address AVP for each potential IP address that MAY be + one Host-IP-Address AVP for each potential IP address that MAY be locally used when transmitting Diameter messages. Message Format @@ -3510,9 +3465,20 @@ Internet-Draft Diameter Base Protocol January 2011 [ Firmware-Revision ] * [ AVP ] + + + + + + +Fajardo, et al. Standards Track [Page 62] + +RFC 6733 Diameter Base Protocol October 2012 + + 5.3.2. Capabilities-Exchange-Answer - The Capabilities-Exchange-Answer (CEA), indicated by the Command-Code + The Capabilities-Exchange-Answer (CEA), indicated by the Command Code set to 257 and the Command Flags' 'R' bit cleared, is sent in response to a CER message. @@ -3522,13 +3488,6 @@ Internet-Draft Diameter Base Protocol January 2011 one Host-IP-Address AVP for each potential IP address that MAY be locally used when transmitting Diameter messages. - - -Fajardo, et al. Expires July 24, 2011 [Page 63] - -Internet-Draft Diameter Base Protocol January 2011 - - Message Format <CEA> ::= < Diameter Header: 257 > @@ -3552,22 +3511,34 @@ Internet-Draft Diameter Base Protocol January 2011 5.3.3. Vendor-Id AVP The Vendor-Id AVP (AVP Code 266) is of type Unsigned32 and contains - the IANA "SMI Network Management Private Enterprise Codes" [RFC3232] - value assigned to the vendor of the Diameter device. It is + the IANA "SMI Network Management Private Enterprise Codes" + [ENTERPRISE] value assigned to the Diameter Software vendor. It is envisioned that the combination of the Vendor-Id, Product-Name - (Section 5.3.7) and the Firmware-Revision (Section 5.3.4) AVPs may + (Section 5.3.7), and Firmware-Revision (Section 5.3.4) AVPs may provide useful debugging information. - A Vendor-Id value of zero in the CER or CEA messages is reserved and + A Vendor-Id value of zero in the CER or CEA message is reserved and indicates that this field is ignored. + + + + + + + +Fajardo, et al. Standards Track [Page 63] + +RFC 6733 Diameter Base Protocol October 2012 + + 5.3.4. Firmware-Revision AVP The Firmware-Revision AVP (AVP Code 267) is of type Unsigned32 and is used to inform a Diameter peer of the firmware revision of the issuing device. - For devices that do not have a firmware revision (general purpose + For devices that do not have a firmware revision (general-purpose computers running Diameter software modules, for instance), the revision of the Diameter software module may be reported instead. @@ -3577,77 +3548,70 @@ Internet-Draft Diameter Base Protocol January 2011 to inform a Diameter peer of the sender's IP address. All source addresses that a Diameter node expects to use with SCTP [RFC4960] or DTLS/SCTP [RFC6083] MUST be advertised in the CER and CEA messages by - - - -Fajardo, et al. Expires July 24, 2011 [Page 64] - -Internet-Draft Diameter Base Protocol January 2011 - - including a Host-IP-Address AVP for each address. 5.3.6. Supported-Vendor-Id AVP The Supported-Vendor-Id AVP (AVP Code 265) is of type Unsigned32 and contains the IANA "SMI Network Management Private Enterprise Codes" - [RFC3232] value assigned to a vendor other than the device vendor but - including the application vendor. This is used in the CER and CEA - messages in order to inform the peer that the sender supports (a - subset of) the vendor-specific AVPs defined by the vendor identified + [ENTERPRISE] value assigned to a vendor other than the device vendor + but including the application vendor. This is used in the CER and + CEA messages in order to inform the peer that the sender supports (a + subset of) the Vendor-Specific AVPs defined by the vendor identified in this AVP. The value of this AVP MUST NOT be set to zero. Multiple instances of this AVP containing the same value SHOULD NOT be sent. 5.3.7. Product-Name AVP - The Product-Name AVP (AVP Code 269) is of type UTF8String, and - contains the vendor assigned name for the product. The Product-Name + The Product-Name AVP (AVP Code 269) is of type UTF8String and + contains the vendor-assigned name for the product. The Product-Name AVP SHOULD remain constant across firmware revisions for the same product. -5.4. Disconnecting Peer connections +5.4. Disconnecting Peer Connections When a Diameter node disconnects one of its transport connections, - its peer cannot know the reason for the disconnect, and will most - likely assume that a connectivity problem occurred, or that the peer + its peer cannot know the reason for the disconnect and will most + likely assume that a connectivity problem occurred or that the peer has rebooted. In these cases, the peer may periodically attempt to reconnect, as stated in Section 2.1. In the event that the - disconnect was a result of either a shortage of internal resources, - or simply that the node in question has no intentions of forwarding - any Diameter messages to the peer in the foreseeable future, a - periodic connection request would not be welcomed. The - Disconnection-Reason AVP contains the reason the Diameter node issued - the Disconnect-Peer-Request message. + disconnect was a result of either a shortage of internal resources or + simply that the node in question has no intentions of forwarding any + Diameter messages to the peer in the foreseeable future, a periodic - The Disconnect-Peer-Request message is used by a Diameter node to - inform its peer of its intent to disconnect the transport layer, and - that the peer shouldn't reconnect unless it has a valid reason to do - so (e.g., message to be forwarded). Upon receipt of the message, the - Disconnect-Peer-Answer is returned, which SHOULD contain an error if - messages have recently been forwarded, and are likely in flight, - which would otherwise cause a race condition. - The receiver of the Disconnect-Peer-Answer initiates the transport - disconnect. The sender of the Disconnect-Peer-Answer should be able - to detect the transport closure and cleanup the connection. +Fajardo, et al. Standards Track [Page 64] + +RFC 6733 Diameter Base Protocol October 2012 + connection request would not be welcomed. The Disconnection-Reason + AVP contains the reason the Diameter node issued the Disconnect-Peer- + Request message. -Fajardo, et al. Expires July 24, 2011 [Page 65] - -Internet-Draft Diameter Base Protocol January 2011 + The Disconnect-Peer-Request message is used by a Diameter node to + inform its peer of its intent to disconnect the transport layer and + that the peer shouldn't reconnect unless it has a valid reason to do + so (e.g., message to be forwarded). Upon receipt of the message, the + Disconnect-Peer-Answer message is returned, which SHOULD contain an + error if messages have recently been forwarded, and are likely in + flight, which would otherwise cause a race condition. + The receiver of the Disconnect-Peer-Answer message initiates the + transport disconnect. The sender of the Disconnect-Peer-Answer + message should be able to detect the transport closure and clean up + the connection. 5.4.1. Disconnect-Peer-Request - The Disconnect-Peer-Request (DPR), indicated by the Command-Code set + The Disconnect-Peer-Request (DPR), indicated by the Command Code set to 282 and the Command Flags' 'R' bit set, is sent to a peer to - inform its intentions to shutdown the transport connection. Upon - detection of a transport failure, this message MUST NOT be sent to an - alternate peer. + inform it of its intentions to shut down the transport connection. + Upon detection of a transport failure, this message MUST NOT be sent + to an alternate peer. Message Format @@ -3659,28 +3623,14 @@ Internet-Draft Diameter Base Protocol January 2011 5.4.2. Disconnect-Peer-Answer - The Disconnect-Peer-Answer (DPA), indicated by the Command-Code set + The Disconnect-Peer-Answer (DPA), indicated by the Command Code set to 282 and the Command Flags' 'R' bit cleared, is sent as a response to the Disconnect-Peer-Request message. Upon receipt of this - message, the transport connection is shutdown. + message, the transport connection is shut down. - Message Format - <DPA> ::= < Diameter Header: 282 > - { Result-Code } - { Origin-Host } - { Origin-Realm } - [ Error-Message ] - [ Failed-AVP ] - * [ AVP ] -5.4.3. Disconnect-Cause AVP - The Disconnect-Cause AVP (AVP Code 273) is of type Enumerated. A - Diameter node MUST include this AVP in the Disconnect-Peer-Request - message to inform the peer of the reason for its intention to - shutdown the transport connection. The following values are - supported: @@ -3689,29 +3639,44 @@ Internet-Draft Diameter Base Protocol January 2011 +Fajardo, et al. Standards Track [Page 65] + +RFC 6733 Diameter Base Protocol October 2012 + Message Format + + <DPA> ::= < Diameter Header: 282 > + { Result-Code } + { Origin-Host } + { Origin-Realm } + [ Error-Message ] + [ Failed-AVP ] + * [ AVP ] -Fajardo, et al. Expires July 24, 2011 [Page 66] - -Internet-Draft Diameter Base Protocol January 2011 +5.4.3. Disconnect-Cause AVP + + The Disconnect-Cause AVP (AVP Code 273) is of type Enumerated. A + Diameter node MUST include this AVP in the Disconnect-Peer-Request + message to inform the peer of the reason for its intention to shut + down the transport connection. The following values are supported: - REBOOTING 0 - A scheduled reboot is imminent. Receiver of DPR with above result - code MAY attempt reconnection. + REBOOTING 0 + A scheduled reboot is imminent. A receiver of a DPR with + above result code MAY attempt reconnection. - BUSY 1 - The peer's internal resources are constrained, and it has - determined that the transport connection needs to be closed. - Receiver of DPR with above result code SHOULD NOT attempt - reconnection. + BUSY 1 + The peer's internal resources are constrained, and it has + determined that the transport connection needs to be closed. + A receiver of a DPR with above result code SHOULD NOT attempt + reconnection. - DO_NOT_WANT_TO_TALK_TO_YOU 2 - The peer has determined that it does not see a need for the - transport connection to exist, since it does not expect any - messages to be exchanged in the near future. Receiver of DPR - with above result code SHOULD NOT attempt reconnection. + DO_NOT_WANT_TO_TALK_TO_YOU 2 + The peer has determined that it does not see a need for the + transport connection to exist, since it does not expect any + messages to be exchanged in the near future. A receiver of a + DPR with above result code SHOULD NOT attempt reconnection. 5.5. Transport Failure Detection @@ -3723,9 +3688,21 @@ Internet-Draft Diameter Base Protocol January 2011 Watchdog-Answer messages, defined in this section, are used to pro- actively detect transport failures. + + + + + + + +Fajardo, et al. Standards Track [Page 66] + +RFC 6733 Diameter Base Protocol October 2012 + + 5.5.1. Device-Watchdog-Request - The Device-Watchdog-Request (DWR), indicated by the Command-Code set + The Device-Watchdog-Request (DWR), indicated by the Command Code set to 280 and the Command Flags' 'R' bit set, is sent to a peer when no traffic has been exchanged between two peers (see Section 5.5.3). Upon detection of a transport failure, this message MUST NOT be sent @@ -3741,18 +3718,10 @@ Internet-Draft Diameter Base Protocol January 2011 5.5.2. Device-Watchdog-Answer - The Device-Watchdog-Answer (DWA), indicated by the Command-Code set + The Device-Watchdog-Answer (DWA), indicated by the Command Code set to 280 and the Command Flags' 'R' bit cleared, is sent as a response to the Device-Watchdog-Request message. - - - -Fajardo, et al. Expires July 24, 2011 [Page 67] - -Internet-Draft Diameter Base Protocol January 2011 - - Message Format <DWA> ::= < Diameter Header: 280 > @@ -3767,7 +3736,7 @@ Internet-Draft Diameter Base Protocol January 2011 5.5.3. Transport Failure Algorithm The transport failure algorithm is defined in [RFC3539]. All - Diameter implementations MUST support the algorithm defined in the + Diameter implementations MUST support the algorithm defined in that specification in order to be compliant to the Diameter base protocol. 5.5.4. Failover and Failback Procedures @@ -3775,7 +3744,17 @@ Internet-Draft Diameter Base Protocol January 2011 In the event that a transport failure is detected with a peer, it is necessary for all pending request messages to be forwarded to an alternate agent, if possible. This is commonly referred to as - failover. + "failover". + + + + + + +Fajardo, et al. Standards Track [Page 67] + +RFC 6733 Diameter Base Protocol October 2012 + In order for a Diameter node to perform failover procedures, it is necessary for the node to maintain a pending message queue for a @@ -3783,16 +3762,16 @@ Internet-Draft Diameter Base Protocol January 2011 request is removed from the queue. The Hop-by-Hop Identifier field is used to match the answer with the queued request. - When a transport failure is detected, if possible all messages in the - queue are sent to an alternate agent with the T flag set. On booting - a Diameter client or agent, the T flag is also set on any records - still remaining to be transmitted in non-volatile storage. An - example of a case where it is not possible to forward the message to - an alternate server is when the message has a fixed destination, and - the unavailable peer is the message's final destination (see - Destination-Host AVP). Such an error requires that the agent return - an answer message with the 'E' bit set and the Result-Code AVP set to - DIAMETER_UNABLE_TO_DELIVER. + When a transport failure is detected, if possible, all messages in + the queue are sent to an alternate agent with the T flag set. On + booting a Diameter client or agent, the T flag is also set on any + remaining records in non-volatile storage that are still waiting to + be transmitted. An example of a case where it is not possible to + forward the message to an alternate server is when the message has a + fixed destination, and the unavailable peer is the message's final + destination (see Destination-Host AVP). Such an error requires that + the agent return an answer message with the 'E' bit set and the + Result-Code AVP set to DIAMETER_UNABLE_TO_DELIVER. It is important to note that multiple identical requests or answers MAY be received as a result of a failover. The End-to-End Identifier @@ -3801,17 +3780,9 @@ Internet-Draft Diameter Base Protocol January 2011 As described in Section 2.1, a connection request should be periodically attempted with the failed peer in order to re-establish - - - -Fajardo, et al. Expires July 24, 2011 [Page 68] - -Internet-Draft Diameter Base Protocol January 2011 - - the transport connection. Once a connection has been successfully established, messages can once again be forwarded to the peer. This - is commonly referred to as failback. + is commonly referred to as "failback". 5.6. Peer State Machine @@ -3824,16 +3795,24 @@ Internet-Draft Diameter Base Protocol January 2011 This state machine is closely coupled with the state machine described in [RFC3539], which is used to open, close, failover, - probe, and reopen transport connections. Note in particular that + probe, and reopen transport connections. In particular, note that [RFC3539] requires the use of watchdog messages to probe connections. For Diameter, DWR and DWA messages are to be used. - I- is used to represent the initiator (connecting) connection, while - the R- is used to represent the responder (listening) connection. - The lack of a prefix indicates that the event or action is the same - regardless of the connection on which the event occurred. + The I- prefix is used to represent the initiator (connecting) + connection, while the R- prefix is used to represent the responder + (listening) connection. The lack of a prefix indicates that the + event or action is the same regardless of the connection on which the + event occurred. + + + +Fajardo, et al. Standards Track [Page 68] + +RFC 6733 Diameter Base Protocol October 2012 + - The stable states that a state machine may be in are Closed, I-Open + The stable states that a state machine may be in are Closed, I-Open, and R-Open; all other states are intermediate. Note that I-Open and R-Open are equivalent except for whether the initiator or responder transport connection is used for communication. @@ -3848,23 +3827,15 @@ Internet-Draft Diameter Base Protocol January 2011 the results of an election on one peer are guaranteed to be the inverse of the results on the other. - For TLS/TCP and DTLS/SCTP usage, TLS/TCP and DTLS/SCTP handshake + For TLS/TCP and DTLS/SCTP usage, a TLS/TCP and DTLS/SCTP handshake SHOULD begin when both ends are in the closed state prior to any Diameter message exchanges. The TLS/TCP and DTLS/SCTP connection SHOULD be established before sending any CER or CEA message to secure and protect the capabilities information of both peers. The TLS/TCP and DTLS/SCTP connection SHOULD be disconnected when the state machine moves to the closed state. When connecting to responders - that do not conform to this document (i.e. older Diameter + that do not conform to this document (i.e., older Diameter implementations that are not prepared to received TLS/TCP and DTLS/ - - - -Fajardo, et al. Expires July 24, 2011 [Page 69] - -Internet-Draft Diameter Base Protocol January 2011 - - SCTP connections in the closed state), the initial TLS/TCP and DTLS/ SCTP connection attempt will fail. The initiator MAY then attempt to connect via TCP or SCTP and initiate the TLS/TCP and DTLS/SCTP @@ -3878,6 +3849,25 @@ Internet-Draft Diameter Base Protocol January 2011 Any implementation that produces equivalent results is considered compliant. + + + + + + + + + + + + + + +Fajardo, et al. Standards Track [Page 69] + +RFC 6733 Diameter Base Protocol October 2012 + + state event action next state ----------------------------------------------------------------- Closed Start I-Snd-Conn-Req Wait-Conn-Ack @@ -3914,13 +3904,6 @@ Internet-Draft Diameter Base Protocol January 2011 R-Conn-CER R-Reject Wait-Returns Timeout Error Closed - - -Fajardo, et al. Expires July 24, 2011 [Page 70] - -Internet-Draft Diameter Base Protocol January 2011 - - R-Open Send-Message R-Snd-Message R-Open R-Rcv-Message Process R-Open R-Rcv-DWR Process-DWR, R-Open @@ -3928,10 +3911,19 @@ Internet-Draft Diameter Base Protocol January 2011 R-Rcv-DWA Process-DWA R-Open R-Conn-CER R-Reject R-Open Stop R-Snd-DPR Closing - R-Rcv-DPR R-Snd-DPA, Closed - R-Disc + R-Rcv-DPR R-Snd-DPA Closing R-Peer-Disc R-Disc Closed + + + + + +Fajardo, et al. Standards Track [Page 70] + +RFC 6733 Diameter Base Protocol October 2012 + + I-Open Send-Message I-Snd-Message I-Open I-Rcv-Message Process I-Open I-Rcv-DWR Process-DWR, I-Open @@ -3939,8 +3931,7 @@ Internet-Draft Diameter Base Protocol January 2011 I-Rcv-DWA Process-DWA I-Open R-Conn-CER R-Reject I-Open Stop I-Snd-DPR Closing - I-Rcv-DPR I-Snd-DPA, Closed - I-Disc + I-Rcv-DPR I-Snd-DPA Closing I-Peer-Disc I-Disc Closed Closing I-Rcv-DPA I-Disc Closed @@ -3949,88 +3940,44 @@ Internet-Draft Diameter Base Protocol January 2011 I-Peer-Disc I-Disc Closed R-Peer-Disc R-Disc Closed -5.6.1. Incoming connections +5.6.1. Incoming Connections When a connection request is received from a Diameter peer, it is not, in the general case, possible to know the identity of that peer until a CER is received from it. This is because host and port - determine the identity of a Diameter peer; and the source port of an - incoming connection is arbitrary. Upon receipt of CER, the identity - of the connecting peer can be uniquely determined from Origin-Host. + determine the identity of a Diameter peer; the source port of an + incoming connection is arbitrary. Upon receipt of a CER, the + identity of the connecting peer can be uniquely determined from the + Origin-Host. For this reason, a Diameter peer must employ logic separate from the state machine to receive connection requests, accept them, and await - CER. Once CER arrives on a new connection, the Origin-Host that - identifies the peer is used to locate the state machine associated - with that peer, and the new connection and CER are passed to the - state machine as an R-Conn-CER event. + the CER. Once the CER arrives on a new connection, the Origin-Host + that identifies the peer is used to locate the state machine + associated with that peer, and the new connection and CER are passed + to the state machine as an R-Conn-CER event. The logic that handles incoming connections SHOULD close and discard - the connection if any message other than CER arrives, or if an + the connection if any message other than a CER arrives or if an implementation-defined timeout occurs prior to receipt of CER. - - - -Fajardo, et al. Expires July 24, 2011 [Page 71] - -Internet-Draft Diameter Base Protocol January 2011 - - Because handling of incoming connections up to and including receipt - of CER requires logic, separate from that of any individual state + of a CER requires logic, separate from that of any individual state machine associated with a particular peer, it is described separately in this section rather than in the state machine above. 5.6.2. Events Transitions and actions in the automaton are caused by events. In - this section, we will ignore the -I and -R prefix, since the actual - event would be identical, but would occur on one of two possible + this section, we will ignore the I- and R- prefixes, since the actual + event would be identical, but it would occur on one of two possible connections. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Fajardo, et al. Expires July 24, 2011 [Page 72] +Fajardo, et al. Standards Track [Page 71] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 Start The Diameter application has signaled that a @@ -4053,7 +4000,8 @@ Internet-Draft Diameter Base Protocol January 2011 Rcv-CEA A CEA message from the peer was received. - Rcv-Non-CEA A message other than CEA from the peer was received. + Rcv-Non-CEA A message, other than a CEA, from the peer was + received. Peer-Disc A disconnection indication from the peer was received. @@ -4066,7 +4014,7 @@ Internet-Draft Diameter Base Protocol January 2011 Send-Message A message is to be sent. - Rcv-Message A message other than CER, CEA, DPR, DPA, DWR or DWA + Rcv-Message A message other than CER, CEA, DPR, DPA, DWR, or DWA was received. Stop The Diameter application has signaled that a @@ -4077,16 +4025,15 @@ Internet-Draft Diameter Base Protocol January 2011 Actions in the automaton are caused by events and typically indicate the transmission of packets and/or an action to be taken on the - connection. In this section we will ignore the I- and R-prefix, - since the actual action would be identical, but would occur on one of - two possible connections. - + connection. In this section, we will ignore the I- and R- prefixes, + since the actual action would be identical, but it would occur on one + of two possible connections. -Fajardo, et al. Expires July 24, 2011 [Page 73] +Fajardo, et al. Standards Track [Page 72] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 Snd-Conn-Req A transport connection is initiated with the peer. @@ -4098,11 +4045,12 @@ Internet-Draft Diameter Base Protocol January 2011 is disconnected. Process-CER The CER associated with the R-Conn-CER is processed. + Snd-CER A CER message is sent to the peer. Snd-CEA A CEA message is sent to the peer. - Cleanup If necessary, the connection is shutdown, and any + Cleanup If necessary, the connection is shut down, and any local resources are freed. Error The transport layer connection is disconnected, @@ -4139,10 +4087,9 @@ Internet-Draft Diameter Base Protocol January 2011 - -Fajardo, et al. Expires July 24, 2011 [Page 74] +Fajardo, et al. Standards Track [Page 73] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 5.6.4. The Election Process @@ -4150,134 +4097,97 @@ Internet-Draft Diameter Base Protocol January 2011 The election is performed on the responder. The responder compares the Origin-Host received in the CER with its own Origin-Host as two streams of octets. If the local Origin-Host lexicographically - succeeds the received Origin-Host a Win-Election event is issued - locally. Diameter identities are in ASCII form therefore the lexical - comparison is consistent with DNS case insensitivity where octets - that fall in the ASCII range 'a' through 'z' MUST compare equally to - their upper-case counterparts between 'A' and 'Z'. See Appendix D - for interactions between the Diameter protocol and Internationalized - Domain Name (IDNs). + succeeds the received Origin-Host, a Win-Election event is issued + locally. Diameter identities are in ASCII form; therefore, the + lexical comparison is consistent with DNS case insensitivity, where + octets that fall in the ASCII range 'a' through 'z' MUST compare + equally to their uppercase counterparts between 'A' and 'Z'. See + Appendix D for interactions between the Diameter protocol and + Internationalized Domain Name (IDNs). The winner of the election MUST close the connection it initiated. Historically, maintaining the responder side of a connection was more efficient than maintaining the initiator side. However, current practices makes this distinction irrelevant. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Fajardo, et al. Expires July 24, 2011 [Page 75] - -Internet-Draft Diameter Base Protocol January 2011 - - -6. Diameter message processing +6. Diameter Message Processing This section describes how Diameter requests and answers are created and processed. 6.1. Diameter Request Routing Overview - A request is sent towards its final destination using a combination - of the Destination-Realm and Destination-Host AVPs, in one of these - three combinations: + A request is sent towards its final destination using one of the + following three combinations of the Destination-Realm and + Destination-Host AVPs: - o a request that is not able to be proxied (such as CER) MUST NOT + o A request that is not able to be proxied (such as a CER) MUST NOT contain either Destination-Realm or Destination-Host AVPs. - o a request that needs to be sent to a home server serving a + o A request that needs to be sent to a home server serving a specific realm, but not to a specific server (such as the first - request of a series of round-trips), MUST contain a Destination- - Realm AVP, but MUST NOT contain a Destination-Host AVP. For + request of a series of round trips), MUST contain a Destination- + Realm AVP but MUST NOT contain a Destination-Host AVP. For Diameter clients, the value of the Destination-Realm AVP MAY be extracted from the User-Name AVP, or other methods. - o otherwise, a request that needs to be sent to a specific home - server among those serving a given realm, MUST contain both the + o Otherwise, a request that needs to be sent to a specific home + server among those serving a given realm MUST contain both the Destination-Realm and Destination-Host AVPs. The Destination-Host AVP is used as described above when the destination of the request is fixed, which includes: - o Authentication requests that span multiple round trips + o Authentication requests that span multiple round trips. + + + + +Fajardo, et al. Standards Track [Page 74] + +RFC 6733 Diameter Base Protocol October 2012 + o A Diameter message that uses a security mechanism that makes use of a pre-established session key shared between the source and the final destination of the message. - o Server initiated messages that MUST be received by a specific + o Server-initiated messages that MUST be received by a specific Diameter client (e.g., access device), such as the Abort-Session- Request message, which is used to request that a particular user's session be terminated. - Note that an agent can forward a request to a host described in the - Destination-Host AVP only if the host in question is included in its - peer table (see Section 2.7). Otherwise, the request is routed based - on the Destination-Realm only (see Sections 6.1.6). + Note that an agent can only forward a request to a host described in + the Destination-Host AVP if the host in question is included in its + peer table (see Section 2.6). Otherwise, the request is routed based + on the Destination-Realm only (see Section 6.1.6). When a message is received, the message is processed in the following order: - - - - -Fajardo, et al. Expires July 24, 2011 [Page 76] - -Internet-Draft Diameter Base Protocol January 2011 - - o If the message is destined for the local host, the procedures listed in Section 6.1.4 are followed. o If the message is intended for a Diameter peer with whom the local host is able to directly communicate, the procedures listed in - Section 6.1.5 are followed. This is known as Request Forwarding. + Section 6.1.5 are followed. This is known as "Request + Forwarding". - o The procedures listed in Section 6.1.6 are followed, which is - known as Request Routing. + o The procedure listed in Section 6.1.6 is followed, which is known + as "Request Routing". - o If none of the above is successful, an answer is returned with the - Result-Code set to DIAMETER_UNABLE_TO_DELIVER, with the E-bit set. + o If none of the above are successful, an answer is returned with + the Result-Code set to DIAMETER_UNABLE_TO_DELIVER, with the 'E' + bit set. For routing of Diameter messages to work within an administrative domain, all Diameter nodes within the realm MUST be peers. - Note the processing rules contained in this section are intended to - be used as general guidelines to Diameter developers. Certain - implementations MAY use different methods than the ones described - here, and still comply with the protocol specification. See Section - 7 for more detail on error handling. + The overview contained in this section (6.1) is intended to provide + general guidelines to Diameter developers. Implementations are free + to use different methods than the ones described here as long as they + conform to the requirements specified in Sections 6.1.1 through + 6.1.9. See Section 7 for more details on error handling. 6.1.1. Originating a Request @@ -4285,33 +4195,35 @@ Internet-Draft Diameter Base Protocol January 2011 described in the application definition for that specific request, the following procedures MUST be followed: - o the Command-Code is set to the appropriate value - o the 'R' bit is set - o the End-to-End Identifier is set to a locally unique value - o the Origin-Host and Origin-Realm AVPs MUST be set to the - appropriate values, used to identify the source of the message - o the Destination-Host and Destination-Realm AVPs MUST be set to the - appropriate values as described in Section 6.1. +Fajardo, et al. Standards Track [Page 75] + +RFC 6733 Diameter Base Protocol October 2012 -6.1.2. Sending a Request - When sending a request, originated either locally, or as the result - of a forwarding or routing operation, the following procedures SHOULD - be followed: + o the Command Code is set to the appropriate value; - o The Hop-by-Hop Identifier SHOULD be set to a locally unique value. + o the 'R' bit is set; + o the End-to-End Identifier is set to a locally unique value; + o the Origin-Host and Origin-Realm AVPs MUST be set to the + appropriate values, used to identify the source of the message; + and + o the Destination-Host and Destination-Realm AVPs MUST be set to the + appropriate values, as described in Section 6.1. -Fajardo, et al. Expires July 24, 2011 [Page 77] - -Internet-Draft Diameter Base Protocol January 2011 +6.1.2. Sending a Request + When sending a request, originated either locally or as the result of + a forwarding or routing operation, the following procedures SHOULD be + followed: + + o The Hop-by-Hop Identifier SHOULD be set to a locally unique value. o The message SHOULD be saved in the list of pending requests. @@ -4328,25 +4240,34 @@ Internet-Draft Diameter Base Protocol January 2011 6.1.4. Processing Local Requests A request is known to be for local consumption when one of the - following conditions occur: + following conditions occurs: - o The Destination-Host AVP contains the local host's identity, + o The Destination-Host AVP contains the local host's identity; o The Destination-Host AVP is not present, the Destination-Realm AVP contains a realm the server is configured to process locally, and - the Diameter application is locally supported, or + the Diameter application is locally supported; or o Both the Destination-Host and the Destination-Realm are not present. + + + + +Fajardo, et al. Standards Track [Page 76] + +RFC 6733 Diameter Base Protocol October 2012 + + When a request is locally processed, the rules in Section 6.2 should be used to generate the corresponding answer. 6.1.5. Request Forwarding - Request forwarding is done using the Diameter Peer Table. The - Diameter peer table contains all of the peers that the local node is - able to directly communicate with. + Request forwarding is done using the Diameter peer table. The + Diameter peer table contains all of the peers with which the local + node is able to directly communicate. When a request is received, and the host encoded in the Destination- Host AVP is one that is present in the peer table, the message SHOULD @@ -4354,29 +4275,21 @@ Internet-Draft Diameter Base Protocol January 2011 6.1.6. Request Routing - Diameter request message routing is done via realms and application - identifiers. A Diameter message that may be forwarded by Diameter - agents (proxies, redirect or relay agents) MUST include the target + Diameter request message routing is done via realms and Application + Ids. A Diameter message that may be forwarded by Diameter agents + (proxies, redirect agents, or relay agents) MUST include the target realm in the Destination-Realm AVP. Request routing SHOULD rely on the Destination-Realm AVP and the Application Id present in the request message header to aid in the routing decision. The realm MAY be retrieved from the User-Name AVP, which is in the form of a - - - -Fajardo, et al. Expires July 24, 2011 [Page 78] - -Internet-Draft Diameter Base Protocol January 2011 - - Network Access Identifier (NAI). The realm portion of the NAI is inserted in the Destination-Realm AVP. Diameter agents MAY have a list of locally supported realms and - applications, and MAY have a list of externally supported realms and - applications. When a request is received that includes a realm + applications, and they MAY have a list of externally supported realms + and applications. When a request is received that includes a realm and/or application that is not locally supported, the message is - routed to the peer configured in the Routing Table (see Section 2.7). + routed to the peer configured in the routing table (see Section 2.7). Realm names and Application Ids are the minimum supported routing criteria, additional information may be needed to support redirect @@ -4385,13 +4298,23 @@ Internet-Draft Diameter Base Protocol January 2011 6.1.7. Predictive Loop Avoidance Before forwarding or routing a request, Diameter agents, in addition - to processing done in Section 6.1.3, SHOULD check for the presence of - candidate route's peer identity in any of the Route-Record AVPs. In - an event of the agent detecting the presence of a candidate route's - peer identity in a Route-Record AVP, the agent MUST ignore such route - for the Diameter request message and attempt alternate routes if any. - In case all the candidate routes are eliminated by the above - criteria, the agent SHOULD return DIAMETER_UNABLE_TO_DELIVER message. + to performing the processing described in Section 6.1.3, SHOULD check + for the presence of a candidate route's peer identity in any of the + Route-Record AVPs. In the event of the agent detecting the presence + of a candidate route's peer identity in a Route-Record AVP, the agent + MUST ignore such a route for the Diameter request message and attempt + alternate routes if any exist. In case all the candidate routes are + eliminated by the above criteria, the agent SHOULD return a + DIAMETER_UNABLE_TO_DELIVER message. + + + + + +Fajardo, et al. Standards Track [Page 77] + +RFC 6733 Diameter Base Protocol October 2012 + 6.1.8. Redirecting Requests @@ -4399,7 +4322,7 @@ Internet-Draft Diameter Base Protocol January 2011 to REDIRECT, it MUST reply with an answer message with the 'E' bit set, while maintaining the Hop-by-Hop Identifier in the header, and include the Result-Code AVP to DIAMETER_REDIRECT_INDICATION. Each of - the servers associated with the routing entry are added in separate + the servers associated with the routing entry are added in a separate Redirect-Host AVP. +------------------+ @@ -4417,21 +4340,13 @@ Internet-Draft Diameter Base Protocol January 2011 | Agent |<-------------| Server | +-------------+ 4. Answer +-------------+ - - - -Fajardo, et al. Expires July 24, 2011 [Page 79] - -Internet-Draft Diameter Base Protocol January 2011 - - Figure 5: Diameter Redirect Agent - The receiver of the answer message with the 'E' bit set, and the - Result-Code AVP set to DIAMETER_REDIRECT_INDICATION uses the hop-by- - hop field in the Diameter header to identify the request in the - pending message queue (see Section 5.3) that is to be redirected. If - no transport connection exists with the new agent, one is created, + The receiver of an answer message with the 'E' bit set and the + Result-Code AVP set to DIAMETER_REDIRECT_INDICATION uses the Hop-by- + Hop Identifier in the Diameter header to identify the request in the + pending message queue (see Section 5.5.4) that is to be redirected. + If no transport connection exists with the new peer, one is created, and the request is sent directly to it. Multiple Redirect-Host AVPs are allowed. The receiver of the answer @@ -4440,17 +4355,26 @@ Internet-Draft Diameter Base Protocol January 2011 When the Redirect-Host-Usage AVP included in the answer message has a non-zero value, a route entry for the redirect indications is created - and cached by the receiver. The redirect usage for such route entry - is set by the value of Redirect-Host-Usage AVP and the lifetime of - the cached route entry is set by Redirect-Max-Cache-Time AVP value. + and cached by the receiver. The redirect usage for such a route + entry is set by the value of Redirect-Host-Usage AVP and the lifetime + of the cached route entry is set by Redirect-Max-Cache-Time AVP + value. It is possible that multiple redirect indications can create multiple cached route entries differing only in their redirect usage and the peer to forward messages to. As an example, two(2) route entries that are created by two(2) redirect indications results in two(2) + + + +Fajardo, et al. Standards Track [Page 78] + +RFC 6733 Diameter Base Protocol October 2012 + + cached routes for the same realm and Application Id. However, one - has a redirect usage of ALL_SESSION where matching request will be - forwarded to one peer and the other has a redirect usage of ALL_REALM + has a redirect usage of ALL_SESSION, where matching requests will be + forwarded to one peer; the other has a redirect usage of ALL_REALM, where request are forwarded to another peer. Therefore, an incoming request that matches the realm and Application Id of both routes will need additional resolution. In such a case, a routing precedence @@ -4460,32 +4384,24 @@ Internet-Draft Diameter Base Protocol January 2011 6.1.9. Relaying and Proxying Requests A relay or proxy agent MUST append a Route-Record AVP to all requests - forwarded. The AVP contains the identity of the peer the request was - received from. + forwarded. The AVP contains the identity of the peer from which the + request was received. - The Hop-by-Hop identifier in the request is saved, and replaced with - a locally unique value. The source of the request is also saved, - which includes the IP address, port and protocol. + The Hop-by-Hop Identifier in the request is saved and replaced with a + locally unique value. The source of the request is also saved, which + includes the IP address, port, and protocol. A relay or proxy agent MAY include the Proxy-Info AVP in requests if it requires access to any local state information when the corresponding response is received. The Proxy-Info AVP has security - implications as state information is distribute to other entities. - As such, it is RECOMMMENDED to protect the content of the Proxy-Info - AVP with cryptographic mechanisms, for example by using a keyed - - - -Fajardo, et al. Expires July 24, 2011 [Page 80] - -Internet-Draft Diameter Base Protocol January 2011 - - - message digest. Such a mechanism, however, requires the management - of keys, although only locally at the Diameter server. Still, a full - description of the management of the keys used to protect the Proxy- - Info AVP is beyond the scope of this document. Below is a list of - commonly recommended: + implications as state information is distributed to other entities. + As such, it is RECOMMENDED that the content of the Proxy-Info AVP be + protected with cryptographic mechanisms, for example, by using a + keyed message digest such as HMAC-SHA1 [RFC2104]. Such a mechanism, + however, requires the management of keys, although only locally at + the Diameter server. Still, a full description of the management of + the keys used to protect the Proxy-Info AVP is beyond the scope of + this document. Below is a list of common recommendations: o The keys should be generated securely following the randomness recommendations in [RFC4086]. @@ -4494,32 +4410,39 @@ Internet-Draft Diameter Base Protocol January 2011 least 128 bits in strength. o The keys should not be used for any other purpose than generating - and verifying tickets. + and verifying instances of the Proxy-Info AVP. o The keys should be changed regularly. - o The keys should be changed if the ticket format or cryptographic + o The keys should be changed if the AVP format or cryptographic protection algorithms change. The message is then forwarded to the next hop, as identified in the - Routing Table. + routing table. + + + + +Fajardo, et al. Standards Track [Page 79] + +RFC 6733 Diameter Base Protocol October 2012 + Figure 6 provides an example of message routing using the procedures listed in these sections. - (Origin-Host=nas.example.net) (Origin-Host=nas.example.net) - (Origin-Realm=example.net) (Origin-Realm=example.net) - (Destination-Realm=example.com) (Destination- - Realm=example.com) + (Origin-Host=nas.example.net) (Origin-Host=nas.example.net) + (Origin-Realm=example.net) (Origin-Realm=example.net) + (Destination-Realm=example.com) (Destination-Realm=example.com) (Route-Record=nas.example.net) - +------+ ------> +------+ ------> +------+ - | | (Request) | | (Request) | | - | NAS +-------------------+ DRL +-------------------+ HMS | - | | | | | | - +------+ <------ +------+ <------ +------+ - example.net (Answer) example.net (Answer) example.com - (Origin-Host=hms.example.com) (Origin-Host=hms.example.com) - (Origin-Realm=example.com) (Origin-Realm=example.com) + +------+ ------> +------+ ------> +------+ + | | (Request) | | (Request) | | + | NAS +-------------------+ DRL +-------------------+ HMS | + | | | | | | + +------+ <------ +------+ <------ +------+ + example.net (Answer) example.net (Answer) example.com + (Origin-Host=hms.example.com) (Origin-Host=hms.example.com) + (Origin-Realm=example.com) (Origin-Realm=example.com) Figure 6: Routing of Diameter messages @@ -4527,15 +4450,7 @@ Internet-Draft Diameter Base Protocol January 2011 incoming messages. At a minimum, validation of the message header and relevant routing AVPs has to be done when relaying messages. Proxy agents may optionally perform more in-depth message validation - for applications it is interested in. - - - - -Fajardo, et al. Expires July 24, 2011 [Page 81] - -Internet-Draft Diameter Base Protocol January 2011 - + for applications in which it is interested. 6.2. Diameter Answer Processing @@ -4544,7 +4459,7 @@ Internet-Draft Diameter Base Protocol January 2011 additional procedures that MAY be discussed in the Diameter application defining the command: - o The same Hop-by-Hop identifier in the request is used in the + o The same Hop-by-Hop Identifier in the request is used in the answer. o The local host's identity is encoded in the Origin-Host AVP. @@ -4561,15 +4476,23 @@ Internet-Draft Diameter Base Protocol January 2011 o Any Proxy-Info AVPs in the request MUST be added to the answer message, in the same order they were present in the request. + + + +Fajardo, et al. Standards Track [Page 80] + +RFC 6733 Diameter Base Protocol October 2012 + + o The 'P' bit is set to the same value as the one in the request. o The same End-to-End identifier in the request is used in the answer. - Note that the error messages (see Section 7.3) are also subjected to + Note that the error messages (see Section 7) are also subjected to the above processing rules. -6.2.1. Processing received Answers +6.2.1. Processing Received Answers A Diameter client or proxy MUST match the Hop-by-Hop Identifier in an answer received against the list of pending requests. The @@ -4579,31 +4502,23 @@ Internet-Draft Diameter Base Protocol January 2011 6.2.2. Relaying and Proxying Answers - If the answer is for a request which was proxied or relayed, the - agent MUST restore the original value of the Diameter header's Hop- - by-Hop Identifier field. + If the answer is for a request that was proxied or relayed, the agent + MUST restore the original value of the Diameter header's Hop-by-Hop + Identifier field. If the last Proxy-Info AVP in the message is targeted to the local Diameter server, the AVP MUST be removed before the answer is - - - -Fajardo, et al. Expires July 24, 2011 [Page 82] - -Internet-Draft Diameter Base Protocol January 2011 - - forwarded. If a relay or proxy agent receives an answer with a Result-Code AVP indicating a failure, it MUST NOT modify the contents of the AVP. - Any additional local errors detected SHOULD be logged, but not + Any additional local errors detected SHOULD be logged but not reflected in the Result-Code AVP. If the agent receives an answer message with a Result-Code AVP indicating success, and it wishes to modify the AVP to indicate an error, it MUST modify the Result-Code AVP to contain the appropriate error in the message destined towards - the access device as well as include the Error-Reporting-Host AVP and - it MUST issue an STR on behalf of the access device towards the + the access device as well as include the Error-Reporting-Host AVP; it + MUST also issue an STR on behalf of the access device towards the Diameter server. The agent MUST then send the answer to the host that it received the @@ -4612,10 +4527,19 @@ Internet-Draft Diameter Base Protocol January 2011 6.3. Origin-Host AVP The Origin-Host AVP (AVP Code 264) is of type DiameterIdentity, and - MUST be present in all Diameter messages. This AVP identifies the + it MUST be present in all Diameter messages. This AVP identifies the endpoint that originated the Diameter message. Relay agents MUST NOT modify this AVP. + + + + +Fajardo, et al. Standards Track [Page 81] + +RFC 6733 Diameter Base Protocol October 2012 + + The value of the Origin-Host AVP is guaranteed to be unique within a single host. @@ -4638,17 +4562,9 @@ Internet-Draft Diameter Base Protocol January 2011 The Destination-Host AVP (AVP Code 293) is of type DiameterIdentity. This AVP MUST be present in all unsolicited agent initiated messages, - MAY be present in request messages, and MUST NOT be present in Answer + MAY be present in request messages, and MUST NOT be present in answer messages. - - - -Fajardo, et al. Expires July 24, 2011 [Page 83] - -Internet-Draft Diameter Base Protocol January 2011 - - The absence of the Destination-Host AVP will cause a message to be sent to any Diameter server supporting the application within the realm specified in Destination-Realm AVP. @@ -4658,20 +4574,28 @@ Internet-Draft Diameter Base Protocol January 2011 6.6. Destination-Realm AVP - The Destination-Realm AVP (AVP Code 283) is of type DiameterIdentity, - and contains the realm the message is to be routed to. The - Destination-Realm AVP MUST NOT be present in Answer messages. - Diameter Clients insert the realm portion of the User-Name AVP. + The Destination-Realm AVP (AVP Code 283) is of type DiameterIdentity + and contains the realm to which the message is to be routed. The + Destination-Realm AVP MUST NOT be present in answer messages. + Diameter clients insert the realm portion of the User-Name AVP. Diameter servers initiating a request message use the value of the Origin-Realm AVP from a previous message received from the intended target host (unless it is known a priori). When present, the Destination-Realm AVP is used to perform message routing decisions. - An ABNF for a request message that includes the Destination-Realm AVP + The CCF for a request message that includes the Destination-Realm AVP SHOULD list the Destination-Realm AVP as a required AVP (an AVP - indicated as {AVP}) otherwise the message is inherently a non- + indicated as {AVP}); otherwise, the message is inherently a non- routable message. + + + +Fajardo, et al. Standards Track [Page 82] + +RFC 6733 Diameter Base Protocol October 2012 + + This AVP SHOULD be placed as close to the Diameter header as possible. @@ -4692,19 +4616,11 @@ Internet-Draft Diameter Base Protocol January 2011 The Proxy-Info AVP (AVP Code 284) is of type Grouped. This AVP contains the identity and local state information of the Diameter node that creates and adds it to a message. The Grouped Data field - has the following ABNF grammar: + has the following CCF grammar: Proxy-Info ::= < AVP Header: 284 > { Proxy-Host } { Proxy-State } - - - -Fajardo, et al. Expires July 24, 2011 [Page 84] - -Internet-Draft Diameter Base Protocol January 2011 - - * [ AVP ] 6.7.3. Proxy-Host AVP @@ -4728,10 +4644,18 @@ Internet-Draft Diameter Base Protocol January 2011 Application-Id AVP MUST match the Application Id present in the Diameter message header. + + + +Fajardo, et al. Standards Track [Page 83] + +RFC 6733 Diameter Base Protocol October 2012 + + 6.9. Acct-Application-Id AVP The Acct-Application-Id AVP (AVP Code 259) is of type Unsigned32 and - is used in order to advertise support of the Accounting portion of an + is used in order to advertise support of the accounting portion of an application (see Section 2.4). If present in a message other than CER and CEA, the value of the Acct-Application-Id AVP MUST match the Application Id present in the Diameter message header. @@ -4740,10 +4664,10 @@ Internet-Draft Diameter Base Protocol January 2011 The Inband-Security-Id AVP (AVP Code 299) is of type Unsigned32 and is used in order to advertise support of the security portion of the - application. The use of this AVP in CER and CEA messages is no - longer recommended. Instead, discovery of a Diameter entities - security capabilities can be done either through static configuration - or via Diameter Peer Discovery described in Section 5.2. + application. The use of this AVP in CER and CEA messages is NOT + RECOMMENDED. Instead, discovery of a Diameter entity's security + capabilities can be done either through static configuration or via + Diameter Peer Discovery as described in Section 5.2. The following values are supported: @@ -4753,36 +4677,37 @@ Internet-Draft Diameter Base Protocol January 2011 This peer does not support TLS/TCP and DTLS/SCTP. This is the default value, if the AVP is omitted. - - - -Fajardo, et al. Expires July 24, 2011 [Page 85] - -Internet-Draft Diameter Base Protocol January 2011 - - TLS 1 - This node supports TLS/TCP and DTLS/SCTP security, as defined by - [RFC5246]. + This node supports TLS/TCP [RFC5246] and DTLS/SCTP [RFC6083] + security. 6.11. Vendor-Specific-Application-Id AVP The Vendor-Specific-Application-Id AVP (AVP Code 260) is of type Grouped and is used to advertise support of a vendor-specific - Diameter Application. Exactly one instance of either Auth- + Diameter application. Exactly one instance of either Auth- Application-Id or Acct-Application-Id AVP MUST be present. The Application Id carried by either Auth-Application-Id or Acct- - Application-Id AVP MUST comply with vendor specific Application Id - assignment described in Sec 11.3. It MUST also match the Application - Id present in the Diameter header except when used in a CER or CEA - message. + Application-Id AVP MUST comply with vendor-specific Application Id + assignment described in Section 11.3. It MUST also match the + Application Id present in the Diameter header except when used in a + CER or CEA message. The Vendor-Id AVP is an informational AVP pertaining to the vendor who may have authorship of the vendor-specific Diameter application. It MUST NOT be used as a means of defining a completely separate vendor-specific Application Id space. + + + + +Fajardo, et al. Standards Track [Page 84] + +RFC 6733 Diameter Base Protocol October 2012 + + The Vendor-Specific-Application-Id AVP SHOULD be placed as close to the Diameter header as possible. @@ -4795,9 +4720,9 @@ Internet-Draft Diameter Base Protocol January 2011 A Vendor-Specific-Application-Id AVP MUST contain exactly one of either Auth-Application-Id or Acct-Application-Id. If a Vendor- - Specific-Application-Id is received without any of these two AVPs, + Specific-Application-Id is received without one of these two AVPs, then the recipient SHOULD issue an answer with a Result-Code set to - DIAMETER_MISSING_AVP. The answer SHOULD also include a Failed-AVP + DIAMETER_MISSING_AVP. The answer SHOULD also include a Failed-AVP, which MUST contain an example of an Auth-Application-Id AVP and an Acct-Application-Id AVP. @@ -4805,22 +4730,13 @@ Internet-Draft Diameter Base Protocol January 2011 Auth-Application-Id and Acct-Application-Id, then the recipient MUST issue an answer with Result-Code set to DIAMETER_AVP_OCCURS_TOO_MANY_TIMES. The answer MUST also include a - Failed-AVP which MUST contain the received Auth-Application-Id AVP + Failed-AVP, which MUST contain the received Auth-Application-Id AVP and Acct-Application-Id AVP. - - - - -Fajardo, et al. Expires July 24, 2011 [Page 86] - -Internet-Draft Diameter Base Protocol January 2011 - - 6.12. Redirect-Host AVP The Redirect-Host AVP (AVP Code 292) is of type DiameterURI. One or - more of instances of this AVP MUST be present if the answer message's + more instances of this AVP MUST be present if the answer message's 'E' bit is set and the Result-Code AVP is set to DIAMETER_REDIRECT_INDICATION. @@ -4836,63 +4752,55 @@ Internet-Draft Diameter Base Protocol January 2011 This AVP MAY be present in answer messages whose 'E' bit is set and the Result-Code AVP is set to DIAMETER_REDIRECT_INDICATION. - When present, this AVP provides a hints about how the routing entry + When present, this AVP provides hints about how the routing entry resulting from the Redirect-Host is to be used. The following values are supported: + + +Fajardo, et al. Standards Track [Page 85] + +RFC 6733 Diameter Base Protocol October 2012 + + DONT_CACHE 0 The host specified in the Redirect-Host AVP SHOULD NOT be cached. This is the default value. - ALL_SESSION 1 All messages within the same session, as defined by the same value of the Session-ID AVP SHOULD be sent to the host specified in the Redirect-Host AVP. - ALL_REALM 2 All messages destined for the realm requested SHOULD be sent to the host specified in the Redirect-Host AVP. - REALM_AND_APPLICATION 3 All messages for the application requested to the realm specified SHOULD be sent to the host specified in the Redirect-Host AVP. - - - -Fajardo, et al. Expires July 24, 2011 [Page 87] - -Internet-Draft Diameter Base Protocol January 2011 - - ALL_APPLICATION 4 All messages for the application requested SHOULD be sent to the host specified in the Redirect-Host AVP. - ALL_HOST 5 All messages that would be sent to the host that generated the Redirect-Host SHOULD be sent to the host specified in the - Redirect- Host AVP. - + Redirect-Host AVP. ALL_USER 6 All messages for the user requested SHOULD be sent to the host specified in the Redirect-Host AVP. - - When multiple cached routes are created by redirect indications and they differ only in redirect usage and peers to forward requests to (see Section 6.1.8), a precedence rule MUST be applied to the @@ -4902,6 +4810,16 @@ Internet-Draft Diameter Base Protocol January 2011 other as they appear. The order is as follows: + + + + + +Fajardo, et al. Standards Track [Page 86] + +RFC 6733 Diameter Base Protocol October 2012 + + 1. ALL_SESSION 2. ALL_USER @@ -4917,58 +4835,31 @@ Internet-Draft Diameter Base Protocol January 2011 6.14. Redirect-Max-Cache-Time AVP The Redirect-Max-Cache-Time AVP (AVP Code 262) is of type Unsigned32. - This AVP MUST be present in answer messages whose 'E' bit is set, the - Result-Code AVP is set to DIAMETER_REDIRECT_INDICATION and the - Redirect-Host-Usage AVP set to a non-zero value. - - - - -Fajardo, et al. Expires July 24, 2011 [Page 88] - -Internet-Draft Diameter Base Protocol January 2011 - + This AVP MUST be present in answer messages whose 'E' bit is set, + whose Result-Code AVP is set to DIAMETER_REDIRECT_INDICATION, and + whose Redirect-Host-Usage AVP set to a non-zero value. This AVP contains the maximum number of seconds the peer and route table entries, created as a result of the Redirect-Host, SHOULD be cached. Note that once a host is no longer reachable, any associated - cache, peer and routing table entries MUST be deleted. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - + cache, peer, and routing table entries MUST be deleted. +7. Error Handling + There are two different types of errors in Diameter; protocol errors + and application errors. A protocol error is one that occurs at the + base protocol level and MAY require per-hop attention (e.g., a + message routing error). Application errors, on the other hand, + generally occur due to a problem with a function specified in a + Diameter application (e.g., user authentication, missing AVP). + Result-Code AVP values that are used to report protocol errors MUST + only be present in answer messages whose 'E' bit is set. When a + request message is received that causes a protocol error, an answer + message is returned with the 'E' bit set, and the Result-Code AVP is + set to the appropriate protocol error value. As the answer is sent + back towards the originator of the request, each proxy or relay agent + MAY take action on the message. @@ -4980,27 +4871,10 @@ Internet-Draft Diameter Base Protocol January 2011 -Fajardo, et al. Expires July 24, 2011 [Page 89] +Fajardo, et al. Standards Track [Page 87] -Internet-Draft Diameter Base Protocol January 2011 - - -7. Error Handling +RFC 6733 Diameter Base Protocol October 2012 - There are two different types of errors in Diameter; protocol and - application errors. A protocol error is one that occurs at the base - protocol level, and MAY require per hop attention (e.g., message - routing error). Application errors, on the other hand, generally - occur due to a problem with a function specified in a Diameter - application (e.g., user authentication, missing AVP). - - Result-Code AVP values that are used to report protocol errors MUST - only be present in answer messages whose 'E' bit is set. When a - request message is received that causes a protocol error, an answer - message is returned with the 'E' bit set, and the Result-Code AVP is - set to the appropriate protocol error value. As the answer is sent - back towards the originator of the request, each proxy or relay agent - MAY take action on the message. 1. Request +---------+ Link Broken +-------------------------->|Diameter |----///----+ @@ -5014,7 +4888,7 @@ Internet-Draft Diameter Base Protocol January 2011 | Relay 3 |-----------+ +---------+ - Figure 7: Example of Protocol Error causing answer message + Figure 7: Example of Protocol Error Causing Answer Message Figure 7 provides an example of a message forwarded upstream by a Diameter relay. When the message is received by Relay 2, and it @@ -5032,40 +4906,40 @@ Internet-Draft Diameter Base Protocol January 2011 +---------+ 4. Answer +---------+ 3. Answer +---------+ (Missing AVP) (Missing AVP) - Figure 8: Example of Application Error Answer message - - - -Fajardo, et al. Expires July 24, 2011 [Page 90] - -Internet-Draft Diameter Base Protocol January 2011 - + Figure 8: Example of Application Error Answer Message Figure 8 provides an example of a Diameter message that caused an application error. When application errors occur, the Diameter - entity reporting the error clears the 'R' bit in the Command Flags, + entity reporting the error clears the 'R' bit in the Command Flags and adds the Result-Code AVP with the proper value. Application - errors do not require any proxy or relay agent involvement, and - therefore the message would be forwarded back to the originator of + errors do not require any proxy or relay agent involvement; + therefore, the message would be forwarded back to the originator of the request. In the case where the answer message itself contains errors, any related session SHOULD be terminated by sending an STR or ASR message. The Termination-Cause AVP in the STR MAY be filled with the appropriate value to indicate the cause of the error. An application - MAY also send an application-specific request instead of STR or ASR - to signal the error in the case where no state is maintained or to - allow for some form of error recovery with the corresponding Diameter - entity. + MAY also send an application-specific request instead of an STR or + ASR message to signal the error in the case where no state is + maintained or to allow for some form of error recovery with the + corresponding Diameter entity. + + + +Fajardo, et al. Standards Track [Page 88] + +RFC 6733 Diameter Base Protocol October 2012 + There are certain Result-Code AVP application errors that require additional AVPs to be present in the answer. In these cases, the Diameter node that sets the Result-Code AVP to indicate the error - MUST add the AVPs. Examples are: + MUST add the AVPs. Examples are as follows: o A request with an unrecognized AVP is received with the 'M' bit - (Mandatory bit) set, causes an answer to be sent with the Result- - Code AVP set to DIAMETER_AVP_UNSUPPORTED, and the Failed-AVP AVP + (Mandatory bit) set causes an answer to be sent with the Result- + Code AVP set to DIAMETER_AVP_UNSUPPORTED and the Failed-AVP AVP containing the offending AVP. o A request with an AVP that is received with an unrecognized value @@ -5073,46 +4947,46 @@ Internet-Draft Diameter Base Protocol January 2011 DIAMETER_INVALID_AVP_VALUE, with the Failed-AVP AVP containing the AVP causing the error. - o A received command which is missing AVP(s) that are defined as - required in the commands ABNF; examples are AVPs indicated as + o A received command that is missing AVPs that are defined as + required in the commands CCF; examples are AVPs indicated as {AVP}. The receiver issues an answer with the Result-Code set to - DIAMETER_MISSING_AVP, and creates an AVP with the AVP Code and + DIAMETER_MISSING_AVP and creates an AVP with the AVP Code and other fields set as expected in the missing AVP. The created AVP - is then added to the Failed- AVP AVP. + is then added to the Failed-AVP AVP. The Result-Code AVP describes the error that the Diameter node encountered in its processing. In case there are multiple errors, the Diameter node MUST report only the first error it encountered - (detected possibly in some implementation dependent order). The + (detected possibly in some implementation-dependent order). The specific errors that can be described by this AVP are described in the following section. +7.1. Result-Code AVP + The Result-Code AVP (AVP Code 268) is of type Unsigned32 and + indicates whether a particular request was completed successfully or + an error occurred. All Diameter answer messages in IETF-defined + Diameter application specifications MUST include one Result-Code AVP. + A non-successful Result-Code AVP (one containing a non-2xxx value + other than DIAMETER_REDIRECT_INDICATION) MUST include the Error- + Reporting-Host AVP if the host setting the Result-Code AVP is + different from the identity encoded in the Origin-Host AVP. + The Result-Code data field contains an IANA-managed 32-bit address + space representing errors (see Section 11.3.2). Diameter provides + the following classes of errors, all identified by the thousands + digit in the decimal notation: -Fajardo, et al. Expires July 24, 2011 [Page 91] - -Internet-Draft Diameter Base Protocol January 2011 -7.1. Result-Code AVP - The Result-Code AVP (AVP Code 268) is of type Unsigned32 and - indicates whether a particular request was completed successfully or - whether an error occurred. All Diameter answer messages in IETF - defined Diameter application specification MUST include one Result- - Code AVP. A non-successful Result-Code AVP (one containing a non - 2xxx value other than DIAMETER_REDIRECT_INDICATION) MUST include the - Error-Reporting-Host AVP if the host setting the Result-Code AVP is - different from the identity encoded in the Origin-Host AVP. +Fajardo, et al. Standards Track [Page 89] + +RFC 6733 Diameter Base Protocol October 2012 - The Result-Code data field contains an IANA-managed 32-bit address - space representing errors (see Section 11.4). Diameter provides the - following classes of errors, all identified by the thousands digit in - the decimal notation: o 1xxx (Informational) @@ -5124,7 +4998,7 @@ Internet-Draft Diameter Base Protocol January 2011 o 5xxx (Permanent Failure) - A non-recognized class (one whose first digit is not defined in this + An unrecognized class (one whose first digit is not defined in this section) MUST be handled as a permanent failure. 7.1.1. Informational @@ -5133,7 +5007,6 @@ Internet-Draft Diameter Base Protocol January 2011 requester that a request could not be satisfied, and additional action is required on its part before access is granted. - DIAMETER_MULTI_ROUND_AUTH 1001 This informational error is returned by a Diameter server to @@ -5141,24 +5014,11 @@ Internet-Draft Diameter Base Protocol January 2011 used requires multiple round trips, and a subsequent request needs to be issued in order for access to be granted. - - - - - - - -Fajardo, et al. Expires July 24, 2011 [Page 92] - -Internet-Draft Diameter Base Protocol January 2011 - - 7.1.2. Success Errors that fall within the Success category are used to inform a peer that a request has been successfully completed. - DIAMETER_SUCCESS 2001 The request was successfully completed. @@ -5174,27 +5034,33 @@ Internet-Draft Diameter Base Protocol January 2011 Errors that fall within the Protocol Error category SHOULD be treated on a per-hop basis, and Diameter proxies MAY attempt to correct the error, if it is possible. Note that these errors MUST only be used - in answer messages whose 'E' bit is set. This document omits some - error codes defined in [RFC3588]. To provide backward compatibility - with [RFC3588] implementations these error code values are not re- - used and hence the error codes values enumerated below are non- - sequential. + in answer messages whose 'E' bit is set. + + +Fajardo, et al. Standards Track [Page 90] + +RFC 6733 Diameter Base Protocol October 2012 + + + DIAMETER_COMMAND_UNSUPPORTED 3001 + + This error code is used when a Diameter entity receives a message + with a Command Code that it does not support. + DIAMETER_UNABLE_TO_DELIVER 3002 - This error is given when Diameter can not deliver the message to + This error is given when Diameter cannot deliver the message to the destination, either because no host within the realm supporting the required application was available to process the - request, or because Destination-Host AVP was given without the + request or because the Destination-Host AVP was given without the associated Destination-Realm AVP. - DIAMETER_REALM_NOT_SERVED 3003 The intended realm of the request is not recognized. - DIAMETER_TOO_BUSY 3004 When returned, a Diameter node SHOULD attempt to send the message @@ -5202,13 +5068,6 @@ Internet-Draft Diameter Base Protocol January 2011 specific server is requested, and it cannot provide the requested service. - - -Fajardo, et al. Expires July 24, 2011 [Page 93] - -Internet-Draft Diameter Base Protocol January 2011 - - DIAMETER_LOOP_DETECTED 3005 An agent detected a loop while trying to get the message to the @@ -5216,121 +5075,110 @@ Internet-Draft Diameter Base Protocol January 2011 if one is available, but the peer reporting the error has identified a configuration problem. - DIAMETER_REDIRECT_INDICATION 3006 A redirect agent has determined that the request could not be - satisfied locally and the initiator of the request SHOULD direct + satisfied locally, and the initiator of the request SHOULD direct the request directly to the server, whose contact information has been added to the response. When set, the Redirect-Host AVP MUST be present. - DIAMETER_APPLICATION_UNSUPPORTED 3007 A request was sent for an application that is not supported. + DIAMETER_INVALID_HDR_BITS 3008 - DIAMETER_INVALID_BIT_IN_HEADER 3011 + A request was received whose bits in the Diameter header were set + either to an invalid combination or to a value that is + inconsistent with the Command Code's definition. - This error is returned when a reserved bit in the Diameter header - is set to one (1) or the bits in the Diameter header defined in - Section 3 are set incorrectly. - DIAMETER_INVALID_MESSAGE_LENGTH 3012 +Fajardo, et al. Standards Track [Page 91] + +RFC 6733 Diameter Base Protocol October 2012 - This error is returned when a request is received with an invalid - message length. + DIAMETER_INVALID_AVP_BITS 3009 + + A request was received that included an AVP whose flag bits are + set to an unrecognized value or that is inconsistent with the + AVP's definition. + + DIAMETER_UNKNOWN_PEER 3010 + + A CER was received from an unknown peer. 7.1.4. Transient Failures Errors that fall within the transient failures category are used to inform a peer that the request could not be satisfied at the time it - was received, but MAY be able to satisfy the request in the future. + was received but MAY be able to satisfy the request in the future. Note that these errors MUST be used in answer messages whose 'E' bit is not set. - DIAMETER_AUTHENTICATION_REJECTED 4001 The authentication process for the user failed, most likely due to an invalid password used by the user. Further attempts MUST only - - - -Fajardo, et al. Expires July 24, 2011 [Page 94] - -Internet-Draft Diameter Base Protocol January 2011 - - be tried after prompting the user for a new password. - DIAMETER_OUT_OF_SPACE 4002 A Diameter node received the accounting request but was unable to commit it to stable storage due to a temporary lack of space. - ELECTION_LOST 4003 The peer has determined that it has lost the election process and has therefore disconnected the transport connection. - 7.1.5. Permanent Failures Errors that fall within the permanent failures category are used to - inform the peer that the request failed, and should not be attempted + inform the peer that the request failed and should not be attempted again. Note that these errors SHOULD be used in answer messages whose 'E' bit is not set. In error conditions where it is not - possible or efficient to compose application-specific answer grammar - then answer messages with E-bit set and complying to the grammar - described in 7.2 MAY also be used for permanent errors. + possible or efficient to compose application-specific answer grammar, + answer messages with the 'E' bit set and which comply to the grammar + described in Section 7.2 MAY also be used for permanent errors. - To provide backward compatibility with existing implementations that - follow [RFC3588], some of the error values that have previously been - used in this category by [RFC3588] will not be re-used. Therefore - the error values enumerated here may be non-sequential. - DIAMETER_AVP_UNSUPPORTED 5001 - The peer received a message that contained an AVP that is not - recognized or supported and was marked with the Mandatory bit. A - Diameter message with this error MUST contain one or more Failed- - AVP AVP containing the AVPs that caused the failure. - DIAMETER_UNKNOWN_SESSION_ID 5002 - The request contained an unknown Session-Id. +Fajardo, et al. Standards Track [Page 92] + +RFC 6733 Diameter Base Protocol October 2012 - DIAMETER_AUTHORIZATION_REJECTED 5003 - A request was received for which the user could not be authorized. - This error could occur if the service requested is not permitted + DIAMETER_AVP_UNSUPPORTED 5001 + The peer received a message that contained an AVP that is not + recognized or supported and was marked with the 'M' (Mandatory) + bit. A Diameter message with this error MUST contain one or more + Failed-AVP AVPs containing the AVPs that caused the failure. + DIAMETER_UNKNOWN_SESSION_ID 5002 -Fajardo, et al. Expires July 24, 2011 [Page 95] - -Internet-Draft Diameter Base Protocol January 2011 + The request contained an unknown Session-Id. + DIAMETER_AUTHORIZATION_REJECTED 5003 + A request was received for which the user could not be authorized. + This error could occur if the service requested is not permitted to the user. - DIAMETER_INVALID_AVP_VALUE 5004 The request contained an AVP with an invalid value in its data portion. A Diameter message indicating this error MUST include the offending AVPs within a Failed-AVP AVP. - DIAMETER_MISSING_AVP 5005 The request did not contain an AVP that is required by the Command @@ -5340,21 +5188,28 @@ Internet-Draft Diameter Base Protocol January 2011 Vendor-Id if applicable. The value field of the missing AVP should be of correct minimum length and contain zeroes. - DIAMETER_RESOURCES_EXCEEDED 5006 A request was received that cannot be authorized because the user has already expended allowed resources. An example of this error - condition is a user that is restricted to one dial-up PPP port, - attempts to establish a second PPP connection. - + condition is when a user that is restricted to one dial-up PPP + port attempts to establish a second PPP connection. DIAMETER_CONTRADICTING_AVPS 5007 The Home Diameter server has detected AVPs in the request that - contradicted each other, and is not willing to provide service to - the user. The Failed-AVP AVPs MUST be present which contains the - AVPs that contradicted each other. + contradicted each other, and it is not willing to provide service + to the user. The Failed-AVP AVP MUST be present, which contain + the AVPs that contradicted each other. + + + + + + +Fajardo, et al. Standards Track [Page 93] + +RFC 6733 Diameter Base Protocol October 2012 DIAMETER_AVP_NOT_ALLOWED 5008 @@ -5363,22 +5218,12 @@ Internet-Draft Diameter Base Protocol January 2011 Failed-AVP AVP MUST be included and contain a copy of the offending AVP. - DIAMETER_AVP_OCCURS_TOO_MANY_TIMES 5009 A message was received that included an AVP that appeared more often than permitted in the message definition. The Failed-AVP AVP MUST be included and contain a copy of the first instance of - - - -Fajardo, et al. Expires July 24, 2011 [Page 96] - -Internet-Draft Diameter Base Protocol January 2011 - - - the offending AVP that exceeded the maximum number of occurrences - + the offending AVP that exceeded the maximum number of occurrences. DIAMETER_NO_COMMON_APPLICATION 5010 @@ -5386,18 +5231,21 @@ Internet-Draft Diameter Base Protocol January 2011 whereby no applications are common between the CER sending peer and the CER receiving peer. - DIAMETER_UNSUPPORTED_VERSION 5011 This error is returned when a request was received, whose version number is unsupported. - DIAMETER_UNABLE_TO_COMPLY 5012 This error is returned when a request is rejected for unspecified reasons. + DIAMETER_INVALID_BIT_IN_HEADER 5013 + + This error is returned when a reserved bit in the Diameter header + is set to one (1) or the bits in the Diameter header are set + incorrectly. DIAMETER_INVALID_AVP_LENGTH 5014 @@ -5407,56 +5255,41 @@ Internet-Draft Diameter Base Protocol January 2011 value exceeds the message length or is less than the minimum AVP header length, it is sufficient to include the offending AVP header and a zero filled payload of the minimum required length - for the payloads data type. If the AVP is a grouped AVP, the - grouped AVP header with an empty payload would be sufficient to + for the payloads data type. If the AVP is a Grouped AVP, the + Grouped AVP header with an empty payload would be sufficient to indicate the offending AVP. In the case where the offending AVP header cannot be fully decoded when the AVP length is less than - the minimum AVP header length, it is sufficient to include an - offending AVP header that is formulated by padding the incomplete - AVP header with zero up to the minimum AVP header length. - - - DIAMETER_NO_COMMON_SECURITY 5017 - - This error is returned when a CER message is received, and there - are no common security mechanisms supported between the peers. A - Capabilities-Exchange-Answer (CEA) MUST be returned with the - Result-Code AVP set to DIAMETER_NO_COMMON_SECURITY. - - -Fajardo, et al. Expires July 24, 2011 [Page 97] +Fajardo, et al. Standards Track [Page 94] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 - DIAMETER_UNKNOWN_PEER 5018 - - A CER was received from an unknown peer. - - - DIAMETER_COMMAND_UNSUPPORTED 5019 - - This error code is used when a Diameter entity receives a message - with a Command Code that it does not support. - + the minimum AVP header length, it is sufficient to include an + offending AVP header that is formulated by padding the incomplete + AVP header with zero up to the minimum AVP header length. - DIAMETER_INVALID_HDR_BITS 5020 + DIAMETER_INVALID_MESSAGE_LENGTH 5015 - A request was received whose bits in the Diameter header were - either set to an invalid combination, or to a value that is - inconsistent with the command code's definition. + This error is returned when a request is received with an invalid + message length. + DIAMETER_INVALID_AVP_BIT_COMBO 5016 - DIAMETER_INVALID_AVP_BITS 5021 + The request contained an AVP with which is not allowed to have the + given value in the AVP Flags field. A Diameter message indicating + this error MUST include the offending AVPs within a Failed-AVP + AVP. - A request was received that included an AVP whose flag bits are - set to an unrecognized value, or that is inconsistent with the - AVP's definition. + DIAMETER_NO_COMMON_SECURITY 5017 + This error is returned when a CER message is received, and there + are no common security mechanisms supported between the peers. A + Capabilities-Exchange-Answer (CEA) message MUST be returned with + the Result-Code AVP set to DIAMETER_NO_COMMON_SECURITY. 7.2. Error Bit @@ -5465,12 +5298,12 @@ Internet-Draft Diameter Base Protocol January 2011 the 'E' bit MUST NOT be sent as a response to an answer message. Note that a message with the 'E' bit set is still subjected to the processing rules defined in Section 6.2. When set, the answer - message will not conform to the ABNF specification for the command, - and will instead conform to the following ABNF: + message will not conform to the CCF specification for the command; + instead, it and will conform to the following CCF: Message Format - <answer-message> ::= < Diameter Header: code, ERR [PXY] > + <answer-message> ::= < Diameter Header: code, ERR [, PXY] > 0*1< Session-Id > { Origin-Host } { Origin-Realm } @@ -5481,16 +5314,16 @@ Internet-Draft Diameter Base Protocol January 2011 [ Failed-AVP ] [ Experimental-Result ] * [ Proxy-Info ] + * [ AVP ] -Fajardo, et al. Expires July 24, 2011 [Page 98] + +Fajardo, et al. Standards Track [Page 95] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 - * [ AVP ] - Note that the code used in the header is the same than the one found in the request message, but with the 'R' bit cleared and the 'E' bit set. The 'P' bit in the header is set to the same value as the one @@ -5499,10 +5332,10 @@ Internet-Draft Diameter Base Protocol January 2011 7.3. Error-Message AVP The Error-Message AVP (AVP Code 281) is of type UTF8String. It MAY - accompany a Result-Code AVP as a human readable error message. The + accompany a Result-Code AVP as a human-readable error message. The Error-Message AVP is not intended to be useful in an environment where error messages are processed automatically. It SHOULD NOT be - expected that the content of this AVP is parsed by network entities. + expected that the content of this AVP be parsed by network entities. 7.4. Error-Reporting-Host AVP @@ -5511,8 +5344,8 @@ Internet-Draft Diameter Base Protocol January 2011 host that sent the Result-Code AVP to a value other than 2001 (Success), only if the host setting the Result-Code is different from the one encoded in the Origin-Host AVP. This AVP is intended to be - used for troubleshooting purposes, and MUST be set when the Result- - Code AVP indicates a failure. + used for troubleshooting purposes, and it MUST be set when the + Result-Code AVP indicates a failure. 7.5. Failed-AVP AVP @@ -5520,43 +5353,44 @@ Internet-Draft Diameter Base Protocol January 2011 debugging information in cases where a request is rejected or not fully processed due to erroneous information in a specific AVP. The value of the Result-Code AVP will provide information on the reason - for the Failed-AVP AVP. A Diameter message SHOULD contain only one - Failed-AVP that corresponds to the error indicated by the Result-Code - AVP. For practical purposes, this Failed-AVP would typically refer - to the first AVP processing error that a Diameter node encounters. + for the Failed-AVP AVP. A Diameter answer message SHOULD contain an + instance of the Failed-AVP AVP that corresponds to the error + indicated by the Result-Code AVP. For practical purposes, this + Failed-AVP would typically refer to the first AVP processing error + that a Diameter node encounters. The possible reasons for this AVP are the presence of an improperly constructed AVP, an unsupported or unrecognized AVP, an invalid AVP value, the omission of a required AVP, the presence of an explicitly - excluded AVP (see tables in Section 10), or the presence of two or - more occurrences of an AVP which is restricted to 0, 1, or 0-1 + excluded AVP (see tables in Section 10) or the presence of two or + more occurrences of an AVP that is restricted to 0, 1, or 0-1 occurrences. A Diameter message SHOULD contain one Failed-AVP AVP, containing the entire AVP that could not be processed successfully. If the failure reason is omission of a required AVP, an AVP with the missing AVP - code, the missing vendor id, and a zero filled payload of the minimum + code, the missing Vendor-Id, and a zero-filled payload of the minimum required length for the omitted AVP will be added. If the failure + reason is an invalid AVP length where the reported length is less -Fajardo, et al. Expires July 24, 2011 [Page 99] +Fajardo, et al. Standards Track [Page 96] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 - reason is an invalid AVP length where the reported length is less than the minimum AVP header length or greater than the reported - message length, a copy of the offending AVP header and a zero filled + message length, a copy of the offending AVP header and a zero-filled payload of the minimum required length SHOULD be added. - In the case where the offending AVP is embedded within a grouped AVP, - the Failed-AVP MAY contain the grouped AVP which in turn contains the - single offending AVP. The same method MAY be employed if the grouped - AVP itself is embedded in yet another grouped AVP and so on. In this - case, the Failed-AVP MAY contain the grouped AVP hierarchy up to the - single offending AVP. This enables the recipient to detect the - location of the offending AVP when embedded in a group. + In the case where the offending AVP is embedded within a Grouped AVP, + the Failed-AVP MAY contain the grouped AVP, which in turn contains + the single offending AVP. The same method MAY be employed if the + grouped AVP itself is embedded in yet another grouped AVP and so on. + In this case, the Failed-AVP MAY contain the grouped AVP hierarchy up + to the single offending AVP. This enables the recipient to detect + the location of the offending AVP when embedded in a group. AVP Format @@ -5577,7 +5411,7 @@ Internet-Draft Diameter Base Protocol January 2011 { Experimental-Result-Code } The Vendor-Id AVP (see Section 5.3.3) in this grouped AVP identifies - the vendor responsible for the assignment of the result code which + the vendor responsible for the assignment of the result code that follows. All Diameter answer messages defined in vendor-specific applications MUST include either one Result-Code AVP or one Experimental-Result AVP. @@ -5590,23 +5424,24 @@ Internet-Draft Diameter Base Protocol January 2011 It is recommended that vendor-specific result codes follow the same conventions given for the Result-Code AVP regarding the different - types of result codes and the handling of errors (for non 2xxx + types of result codes and the handling of errors (for non-2xxx values). -Fajardo, et al. Expires July 24, 2011 [Page 100] + +Fajardo, et al. Standards Track [Page 97] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 8. Diameter User Sessions In general, Diameter can provide two different types of services to applications. The first involves authentication and authorization, - and can optionally make use of accounting. The second only makes use - of accounting. + and it can optionally make use of accounting. The second only makes + use of accounting. When a service makes use of the authentication and/or authorization portion of an application, and a user requests access to the network, @@ -5614,27 +5449,28 @@ Internet-Draft Diameter Base Protocol January 2011 auth request is defined in a service-specific Diameter application (e.g., NASREQ). The request contains a Session-Id AVP, which is used in subsequent messages (e.g., subsequent authorization, accounting, - etc) relating to the user's session. The Session-Id AVP is a means + etc.) relating to the user's session. The Session-Id AVP is a means for the client and servers to correlate a Diameter message with a user session. - When a Diameter server authorizes a user to use network resources for - a finite amount of time, and it is willing to extend the - authorization via a future request, it MUST add the Authorization- - Lifetime AVP to the answer message. The Authorization-Lifetime AVP - defines the maximum number of seconds a user MAY make use of the - resources before another authorization request is expected by the - server. The Auth-Grace-Period AVP contains the number of seconds - following the expiration of the Authorization-Lifetime, after which - the server will release all state information related to the user's - session. Note that if payment for services is expected by the - serving realm from the user's home realm, the Authorization-Lifetime - AVP, combined with the Auth-Grace-Period AVP, implies the maximum - length of the session the home realm is willing to be fiscally - responsible for. Services provided past the expiration of the - Authorization-Lifetime and Auth-Grace-Period AVPs are the - responsibility of the access device. Of course, the actual cost of - services rendered is clearly outside the scope of the protocol. + When a Diameter server authorizes a user to implement network + resources for a finite amount of time, and it is willing to extend + the authorization via a future request, it MUST add the + Authorization- Lifetime AVP to the answer message. The + Authorization-Lifetime AVP defines the maximum number of seconds a + user MAY make use of the resources before another authorization + request is expected by the server. The Auth-Grace-Period AVP + contains the number of seconds following the expiration of the + Authorization-Lifetime, after which the server will release all state + information related to the user's session. Note that if payment for + services is expected by the serving realm from the user's home realm, + the Authorization-Lifetime AVP, combined with the Auth-Grace-Period + AVP, implies the maximum length of the session for which the home + realm is willing to be fiscally responsible. Services provided past + the expiration of the Authorization-Lifetime and Auth-Grace-Period + AVPs are the responsibility of the access device. Of course, the + actual cost of services rendered is clearly outside the scope of the + protocol. An access device that does not expect to send a re-authorization or a session termination request to the server MAY include the Auth- @@ -5648,32 +5484,33 @@ Internet-Draft Diameter Base Protocol January 2011 value NO_STATE_MAINTAINED MUST NOT be set in subsequent re- authorization requests and answers. - The base protocol does not include any authorization request -Fajardo, et al. Expires July 24, 2011 [Page 101] +Fajardo, et al. Standards Track [Page 98] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 + The base protocol does not include any authorization request messages, since these are largely application-specific and are defined in a Diameter application document. However, the base protocol does define a set of messages that are used to terminate user sessions. These are used to allow servers that maintain state information to free resources. - When a service only makes use of the Accounting portion of the + When a service only makes use of the accounting portion of the Diameter protocol, even in combination with an application, the Session-Id is still used to identify user sessions. However, the session termination messages are not used, since a session is signaled as being terminated by issuing an accounting stop message. Diameter may also be used for services that cannot be easily - categorized as authentication, authorization or accounting (e.g., - certain 3GPP IMS interfaces). In such cases, the finite state + categorized as authentication, authorization, or accounting (e.g., + certain Third Generation Partnership Project Internet Multimedia + System (3GPP IMS) interfaces). In such cases, the finite state machine defined in subsequent sections may not be applicable. - Therefore, the applications itself MAY need to define its own finite + Therefore, the application itself MAY need to define its own finite state machine. However, such application-specific state machines SHOULD follow the general state machine framework outlined in this document such as the use of Session-Id AVPs and the use of STR/STA, @@ -5681,12 +5518,12 @@ Internet-Draft Diameter Base Protocol January 2011 8.1. Authorization Session State Machine - This section contains a set of finite state machines, representing - the life cycle of Diameter sessions, and which MUST be observed by - all Diameter implementations that make use of the authentication - and/or authorization portion of a Diameter application. The term - Service-Specific below refers to a message defined in a Diameter - application (e.g., Mobile IPv4, NASREQ). + This section contains a set of finite state machines, which represent + the life cycle of Diameter sessions and which MUST be observed by all + Diameter implementations that make use of the authentication and/or + authorization portion of a Diameter application. The term "Service- + Specific" below refers to a message defined in a Diameter application + (e.g., Mobile IPv4, NASREQ). There are four different authorization session state machines supported in the Diameter base protocol. The first two describe a @@ -5700,26 +5537,25 @@ Internet-Draft Diameter Base Protocol January 2011 When a session is moved to the Idle state, any resources that were allocated for the particular session must be released. Any event not - listed in the state machines MUST be considered as an error - condition, and an answer, if applicable, MUST be returned to the - originator of the message. + listed in the state machines MUST be considered an error condition, + and an answer, if applicable, MUST be returned to the originator of + the message. - In the case that an application does not support re-auth, the state - -Fajardo, et al. Expires July 24, 2011 [Page 102] +Fajardo, et al. Standards Track [Page 99] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 - transitions related to server-initiated re-auth when both client and - server session maintains state (e.g., Send RAR, Pending, Receive RAA) - MAY be ignored. + In the case that an application does not support re-auth, the state + transitions related to server-initiated re-auth, when both client and + server sessions maintain state (e.g., Send RAR, Pending, Receive + RAA), MAY be ignored. - In the state table, the event 'Failure to send X' means that the + In the state table, the event "Failure to send X" means that the Diameter agent is unable to send command X to the desired - destination. This could be due to the peer being down, or due to the + destination. This could be due to the peer being down or due to the peer sending back a transient failure or temporary protocol error notification DIAMETER_TOO_BUSY or DIAMETER_LOOP_DETECTED in the Result-Code AVP of the corresponding Answer command. The event 'X @@ -5731,8 +5567,8 @@ Internet-Draft Diameter Base Protocol January 2011 CLIENT, STATEFUL State Event Action New State --------------------------------------------------------------- - Idle Client or Device Requests Send Pending - access service + Idle Client or device requests Send Pending + access service- specific auth req @@ -5748,39 +5584,38 @@ Internet-Draft Diameter Base Protocol January 2011 UNKNOWN_ SESSION_ID - Pending Successful Service-specific Grant Open + Pending Successful service-specific Grant Open authorization answer Access received with default Auth-Session-State value - Pending Successful Service-specific Sent STR Discon - authorization answer received + Pending Successful service-specific Sent STR Discon + authorization answer received, but service not provided Pending Error processing successful Sent STR Discon - Service-specific authorization + service-specific authorization answer - -Fajardo, et al. Expires July 24, 2011 [Page 103] +Fajardo, et al. Standards Track [Page 100] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 - Pending Failed Service-specific Cleanup Idle + Pending Failed service-specific Clean up Idle authorization answer received Open User or client device Send Open - requests access to service service + requests access to service service- specific auth req - Open Successful Service-specific Provide Open - authorization answer received Service + Open Successful service-specific Provide Open + authorization answer received service - Open Failed Service-specific Discon. Idle + Open Failed service-specific Discon. Idle authorization answer user/device received. @@ -5796,10 +5631,10 @@ Internet-Draft Diameter Base Protocol January 2011 Discon. user/device - Open Session-Timeout Expires on Send STR Discon - Access Device + Open Session-Timeout expires on Send STR Discon + access device - Open ASR Received, Send ASA Discon + Open ASR received, Send ASA Discon client will comply with with request to end the Result-Code = session = SUCCESS, @@ -5814,17 +5649,18 @@ Internet-Draft Diameter Base Protocol January 2011 Auth-Grace-Period expires on access device - Discon ASR Received Send ASA Discon + Discon ASR received Send ASA Discon + - Discon STA Received Discon. Idle -Fajardo, et al. Expires July 24, 2011 [Page 104] +Fajardo, et al. Standards Track [Page 101] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 + Discon STA received Discon. Idle user/device The following state machine is observed by a server when it is @@ -5835,31 +5671,34 @@ Internet-Draft Diameter Base Protocol January 2011 --------------------------------------------------------------- Idle Service-specific authorization Send Open request received, and successful - user is authorized serv. + user is authorized service- specific answer Idle Service-specific authorization Send Idle - request received, and failed serv. - user is not authorized specific + request received, and failed + user is not authorized service- + specific answer Open Service-specific authorization Send Open request received, and user successful - is authorized serv. specific + is authorized service- + specific answer Open Service-specific authorization Send Idle - request received, and user failed serv. - is not authorized specific + request received, and user failed + is not authorized service- + specific answer, - Cleanup + Clean up Open Home server wants to confirm Send RAR Pending authentication and/or authorization of the user - Pending Received RAA with a failed Cleanup Idle + Pending Received RAA with a failed Clean up Idle Result-Code Pending Received RAA with Result-Code Update Open @@ -5868,32 +5707,33 @@ Internet-Draft Diameter Base Protocol January 2011 Open Home server wants to Send ASR Discon terminate the service - Open Authorization-Lifetime (and Cleanup Idle - Auth-Grace-Period) expires - on home server. - Open Session-Timeout expires on Cleanup Idle -Fajardo, et al. Expires July 24, 2011 [Page 105] +Fajardo, et al. Standards Track [Page 102] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 + Open Authorization-Lifetime (and Clean up Idle + Auth-Grace-Period) expires + on home server + + Open Session-Timeout expires on Clean up Idle home server Discon Failure to send ASR Wait, Discon resend ASR - Discon ASR successfully sent and Cleanup Idle + Discon ASR successfully sent and Clean up Idle ASA Received with Result-Code - Not ASA Received None No Change. + Not ASA Received None No Change Discon Any STR Received Send STA, Idle - Cleanup. + Clean up The following state machine is observed by a client when state is not maintained on the server: @@ -5901,48 +5741,47 @@ Internet-Draft Diameter Base Protocol January 2011 CLIENT, STATELESS State Event Action New State --------------------------------------------------------------- - Idle Client or Device Requests Send Pending - access service + Idle Client or device requests Send Pending + access service- specific auth req - Pending Successful Service-specific Grant Open - authorization answer Access + Pending Successful service-specific Grant Open + authorization answer access received with Auth-Session- State set to NO_STATE_MAINTAINED - Pending Failed Service-specific Cleanup Idle + Pending Failed service-specific Clean up Idle authorization answer received - Open Session-Timeout Expires on Discon. Idle - Access Device user/device + Open Session-Timeout expires on Discon. Idle + access device user/device Open Service to user is terminated Discon. Idle user/device - The following state machine is observed by a server when it is not - maintaining state for the session: - - - -Fajardo, et al. Expires July 24, 2011 [Page 106] +Fajardo, et al. Standards Track [Page 103] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 + + The following state machine is observed by a server when it is not + maintaining state for the session: SERVER, STATELESS State Event Action New State --------------------------------------------------------------- - Idle Service-specific authorization Send serv. Idle - request received, and specific - successfully processed answer + Idle Service-specific authorization Send Idle + request received, and service- + successfully processed specific + answer 8.2. Accounting Session State Machine @@ -5960,8 +5799,8 @@ Internet-Draft Diameter Base Protocol January 2011 machine in this section described below. The default server side state machine requires the reception of - accounting records in any order and at any time, and does not place - any standards requirement on the processing of these records. + accounting records in any order and at any time, and it does not + place any standards requirement on the processing of these records. Implementations of Diameter may perform checking, ordering, correlation, fraud detection, and other tasks based on these records. AVPs may need to be inspected as a part of these tasks. The tasks @@ -5970,7 +5809,7 @@ Internet-Draft Diameter Base Protocol January 2011 or even policy dependent, they are not standardized by the Diameter specifications. Applications MAY define requirements on when to accept accounting records based on the used value of Accounting- - Realtime-Required AVP, credit limits checks, and so on. + Realtime-Required AVP, credit-limit checks, and so on. However, the Diameter base protocol defines one optional server side state machine that MAY be followed by applications that require @@ -5978,31 +5817,31 @@ Internet-Draft Diameter Base Protocol January 2011 that such tracking is incompatible with the ability to sustain long duration connectivity problems. Therefore, the use of this state machine is recommended only in applications where the value of the - Accounting-Realtime-Required AVP is DELIVER_AND_GRANT, and hence + Accounting-Realtime-Required AVP is DELIVER_AND_GRANT; hence, accounting connectivity problems are required to cause the serviced user to be disconnected. Otherwise, records produced by the client - may be lost by the server which no longer accepts them after the - connectivity is re-established. This state machine is the third - state machine in this section. The state machine is supervised by a - supervision session timer Ts, which the value should be reasonably -Fajardo, et al. Expires July 24, 2011 [Page 107] +Fajardo, et al. Standards Track [Page 104] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 - higher than the Acct_Interim_Interval value. Ts MAY be set to two - times the value of the Acct_Interim_Interval so as to avoid the - accounting session in the Diameter server to change to Idle state in - case of short transient network failure. + may be lost by the server, which no longer accepts them after the + connectivity is re-established. This state machine is the third + state machine in this section. The state machine is supervised by a + supervision session timer Ts, whose value should be reasonably higher + than the Acct_Interim_Interval value. Ts MAY be set to two times the + value of the Acct_Interim_Interval so as to avoid the accounting + session in the Diameter server to change to Idle state in case of + short transient network failure. Any event not listed in the state machines MUST be considered as an error condition, and a corresponding answer, if applicable, MUST be returned to the originator of the message. - In the state table, the event 'Failure to send' means that the + In the state table, the event "Failure to send" means that the Diameter client is unable to communicate with the desired destination. This could be due to the peer being down, or due to the peer sending back a transient failure or temporary protocol error @@ -6010,17 +5849,17 @@ Internet-Draft Diameter Base Protocol January 2011 DIAMETER_LOOP_DETECTED in the Result-Code AVP of the Accounting Answer command. - The event 'Failed answer' means that the Diameter client received a + The event "Failed answer" means that the Diameter client received a non-transient failure notification in the Accounting Answer command. - Note that the action 'Disconnect user/dev' MUST have an effect also - to the authorization session state table, e.g., cause the STR message + Note that the action "Disconnect user/dev" MUST also have an effect + on the authorization session state table, e.g., cause the STR message to be sent, if the given application has both authentication/ authorization and accounting portions. - The states PendingS, PendingI, PendingL, PendingE and PendingB stand + The states PendingS, PendingI, PendingL, PendingE, and PendingB stand for pending states to wait for an answer to an accounting request - related to a Start, Interim, Stop, Event or buffered record, + related to a Start, Interim, Stop, Event, or buffered record, respectively. CLIENT, ACCOUNTING @@ -6037,36 +5876,36 @@ Internet-Draft Diameter Base Protocol January 2011 Idle Records in storage Send PendingB record - PendingS Successful accounting Open - start answer received - - PendingS Failure to send and buffer Store Open -Fajardo, et al. Expires July 24, 2011 [Page 108] +Fajardo, et al. Standards Track [Page 105] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 - space available and realtime Start + PendingS Successful accounting Open + start answer received + + PendingS Failure to send and buffer Store Open + space available and real time Start not equal to DELIVER_AND_GRANT Record PendingS Failure to send and no buffer Open - space available and realtime + space available and real time equal to GRANT_AND_LOSE PendingS Failure to send and no Disconnect Idle buffer space available and user/dev - realtime not equal to + real time not equal to GRANT_AND_LOSE PendingS Failed accounting start answer Open - received and realtime equal + received and real time equal to GRANT_AND_LOSE PendingS Failed accounting start answer Disconnect Idle - received and realtime not user/dev + received and real time not user/dev equal to GRANT_AND_LOSE PendingS User service terminated Store PendingS @@ -6077,6 +5916,7 @@ Internet-Draft Diameter Base Protocol January 2011 accounting interim record + Open User service terminated Send PendingL accounting stop req. @@ -6087,34 +5927,35 @@ Internet-Draft Diameter Base Protocol January 2011 PendingI Failure to send and (buffer Store Open space available or old interim record can be overwritten) record - and realtime not equal to + and real time not equal to DELIVER_AND_GRANT - PendingI Failure to send and no buffer Open - space available and realtime - equal to GRANT_AND_LOSE - PendingI Failure to send and no Disconnect Idle - buffer space available and user/dev -Fajardo, et al. Expires July 24, 2011 [Page 109] +Fajardo, et al. Standards Track [Page 106] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 + + PendingI Failure to send and no buffer Open + space available and real time + equal to GRANT_AND_LOSE - realtime not equal to + PendingI Failure to send and no Disconnect Idle + buffer space available and user/dev + real time not equal to GRANT_AND_LOSE PendingI Failed accounting interim Open - answer received and realtime + answer received and real time equal to GRANT_AND_LOSE PendingI Failed accounting interim Disconnect Idle answer received and user/dev - realtime not equal to + real time not equal to GRANT_AND_LOSE PendingI User service terminated Store PendingI @@ -6148,6 +5989,13 @@ Internet-Draft Diameter Base Protocol January 2011 space available stop record + + +Fajardo, et al. Standards Track [Page 107] + +RFC 6733 Diameter Base Protocol October 2012 + + PendingL Failure to send and no buffer Idle space available @@ -6155,124 +6003,133 @@ Internet-Draft Diameter Base Protocol January 2011 received - -Fajardo, et al. Expires July 24, 2011 [Page 110] - -Internet-Draft Diameter Base Protocol January 2011 - - SERVER, STATELESS ACCOUNTING State Event Action New State --------------------------------------------------------------- Idle Accounting start request Send Idle - received, and successfully accounting + received and successfully accounting processed. start answer Idle Accounting event request Send Idle - received, and successfully accounting + received and successfully accounting processed. event answer - Idle Interim record received, Send Idle + Idle Interim record received Send Idle and successfully processed. accounting interim answer Idle Accounting stop request Send Idle - received, and successfully accounting + received and successfully accounting processed stop answer - Idle Accounting request received, Send Idle + Idle Accounting request received; Send Idle no space left to store accounting - records answer, + records answer; Result-Code = OUT_OF_ SPACE + + + + + + + + + + + + + + +Fajardo, et al. Standards Track [Page 108] + +RFC 6733 Diameter Base Protocol October 2012 + + SERVER, STATEFUL ACCOUNTING State Event Action New State --------------------------------------------------------------- Idle Accounting start request Send Open - received, and successfully accounting + received and successfully accounting processed. start - answer, + answer; Start Ts Idle Accounting event request Send Idle - received, and successfully accounting + received and successfully accounting processed. event answer - - Idle Accounting request received, Send Idle + Idle Accounting request received; Send Idle no space left to store accounting - records answer, - - - -Fajardo, et al. Expires July 24, 2011 [Page 111] - -Internet-Draft Diameter Base Protocol January 2011 - - + records answer; Result-Code = OUT_OF_ SPACE - Open Interim record received, Send Open + Open Interim record received Send Open and successfully processed. accounting interim - answer, + answer; Restart Ts Open Accounting stop request Send Idle - received, and successfully accounting - processed stop answer, + received and successfully accounting + processed stop answer; Stop Ts - Open Accounting request received, Send Idle + Open Accounting request received; Send Idle no space left to store accounting - records answer, + records answer; Result-Code = OUT_OF_ - SPACE, + SPACE; Stop Ts Open Session supervision timer Ts Stop Ts Idle expired + + + + + + + + +Fajardo, et al. Standards Track [Page 109] + +RFC 6733 Diameter Base Protocol October 2012 + + 8.3. Server-Initiated Re-Auth A Diameter server may initiate a re-authentication and/or re- authorization service for a particular session by issuing a Re-Auth- Request (RAR). - For example, for pre-paid services, the Diameter server that + For example, for prepaid services, the Diameter server that originally authorized a session may need some confirmation that the user is still using the services. - An access device that receives a RAR message with Session-Id equal to - a currently active session MUST initiate a re-auth towards the user, - if the service supports this particular feature. Each Diameter - application MUST state whether server-initiated re-auth is supported, - since some applications do not allow access devices to prompt the - user for re-auth. + An access device that receives an RAR message with the Session-Id + equal to a currently active session MUST initiate a re-auth towards + the user, if the service supports this particular feature. Each + Diameter application MUST state whether server-initiated re-auth is + supported, since some applications do not allow access devices to + prompt the user for re-auth. 8.3.1. Re-Auth-Request - The Re-Auth-Request (RAR), indicated by the Command-Code set to 258 + The Re-Auth-Request (RAR), indicated by the Command Code set to 258 and the message flags' 'R' bit set, may be sent by any server to the access device that is providing session service, to request that the - - - -Fajardo, et al. Expires July 24, 2011 [Page 112] - -Internet-Draft Diameter Base Protocol January 2011 - - user be re-authenticated and/or re-authorized. @@ -6294,15 +6151,22 @@ Internet-Draft Diameter Base Protocol January 2011 8.3.2. Re-Auth-Answer - The Re-Auth-Answer (RAA), indicated by the Command-Code set to 258 + The Re-Auth-Answer (RAA), indicated by the Command Code set to 258 and the message flags' 'R' bit clear, is sent in response to the RAR. - The Result-Code AVP MUST be present, and indicates the disposition of - the request. + The Result-Code AVP MUST be present, and it indicates the disposition + of the request. + + + + +Fajardo, et al. Standards Track [Page 110] + +RFC 6733 Diameter Base Protocol October 2012 + A successful RAA message MUST be followed by an application-specific authentication and/or authorization message. - Message Format <RAA> ::= < Diameter Header: 258, PXY > @@ -6321,14 +6185,6 @@ Internet-Draft Diameter Base Protocol January 2011 * [ Proxy-Info ] * [ AVP ] - - - -Fajardo, et al. Expires July 24, 2011 [Page 113] - -Internet-Draft Diameter Base Protocol January 2011 - - 8.4. Session Termination It is necessary for a Diameter server that authorized a session, for @@ -6356,6 +6212,14 @@ Internet-Draft Diameter Base Protocol January 2011 It is also possible that a session that was authorized is never actually started due to action of a proxy. For example, a proxy may + + + +Fajardo, et al. Standards Track [Page 111] + +RFC 6733 Diameter Base Protocol October 2012 + + modify an authorization answer, converting the result from success to failure, prior to forwarding the message to the access device. If the answer did not contain an Auth-Session-State AVP with the value @@ -6366,36 +6230,27 @@ Internet-Draft Diameter Base Protocol January 2011 A Diameter server that receives an STR message MUST clean up resources (e.g., session state) associated with the Session-Id - specified in the STR, and return a Session-Termination-Answer. + specified in the STR and return a Session-Termination-Answer. A Diameter server also MUST clean up resources when the Session- Timeout expires, or when the Authorization-Lifetime and the Auth- - Grace-Period AVPs expires without receipt of a re-authorization + Grace-Period AVPs expire without receipt of a re-authorization request, regardless of whether an STR for that session is received. The access device is not expected to provide service beyond the expiration of these timers; thus, expiration of either of these timers implies that the access device may have unexpectedly shut down. - - - -Fajardo, et al. Expires July 24, 2011 [Page 114] - -Internet-Draft Diameter Base Protocol January 2011 - - 8.4.1. Session-Termination-Request - The Session-Termination-Request (STR), indicated by the Command-Code + The Session-Termination-Request (STR), indicated by the Command Code set to 275 and the Command Flags' 'R' bit set, is sent by a Diameter - client or by a Diameter proxy to inform the Diameter Server that an + client or by a Diameter proxy to inform the Diameter server that an authenticated and/or authorized session is being terminated. + Message Format - Message Format - - <STR> ::= < Diameter Header: 275, REQ, PXY > + <STR> ::= < Diameter Header: 275, REQ, PXY > < Session-Id > { Origin-Host } { Origin-Realm } @@ -6410,40 +6265,33 @@ Internet-Draft Diameter Base Protocol January 2011 * [ Route-Record ] * [ AVP ] -8.4.2. Session-Termination-Answer - - The Session-Termination-Answer (STA), indicated by the Command-Code - set to 275 and the message flags' 'R' bit clear, is sent by the - Diameter Server to acknowledge the notification that the session has - been terminated. The Result-Code AVP MUST be present, and MAY - contain an indication that an error occurred while servicing the STR. - - Upon sending or receipt of the STA, the Diameter Server MUST release - all resources for the session indicated by the Session-Id AVP. Any - intermediate server in the Proxy-Chain MAY also release any - resources, if necessary. - - - - - +Fajardo, et al. Standards Track [Page 112] + +RFC 6733 Diameter Base Protocol October 2012 +8.4.2. Session-Termination-Answer -Fajardo, et al. Expires July 24, 2011 [Page 115] - -Internet-Draft Diameter Base Protocol January 2011 + The Session-Termination-Answer (STA), indicated by the Command Code + set to 275 and the message flags' 'R' bit clear, is sent by the + Diameter server to acknowledge the notification that the session has + been terminated. The Result-Code AVP MUST be present, and it MAY + contain an indication that an error occurred while servicing the STR. + Upon sending or receipt of the STA, the Diameter server MUST release + all resources for the session indicated by the Session-Id AVP. Any + intermediate server in the Proxy-Chain MAY also release any + resources, if necessary. - Message Format + Message Format - <STA> ::= < Diameter Header: 275, PXY > + <STA> ::= < Diameter Header: 275, PXY > < Session-Id > { Result-Code } { Origin-Host } @@ -6473,31 +6321,29 @@ Internet-Draft Diameter Base Protocol January 2011 An access device that receives an ASR with Session-ID equal to a currently active session MAY stop the session. Whether the access - device stops the session or not is implementation- and/or - configuration-dependent. For example, an access device may honor + device stops the session or not is implementation and/or + configuration dependent. For example, an access device may honor ASRs from certain agents only. In any case, the access device MUST + + + +Fajardo, et al. Standards Track [Page 113] + +RFC 6733 Diameter Base Protocol October 2012 + + respond with an Abort-Session-Answer, including a Result-Code AVP to indicate what action it took. 8.5.1. Abort-Session-Request - The Abort-Session-Request (ASR), indicated by the Command-Code set to + The Abort-Session-Request (ASR), indicated by the Command Code set to 274 and the message flags' 'R' bit set, may be sent by any Diameter server or any Diameter proxy to the access device that is providing session service, to request that the session identified by the Session-Id be stopped. - - - - - -Fajardo, et al. Expires July 24, 2011 [Page 116] - -Internet-Draft Diameter Base Protocol January 2011 - - - Message Format + Message Format <ASR> ::= < Diameter Header: 274, REQ, PXY > < Session-Id > @@ -6514,20 +6360,35 @@ Internet-Draft Diameter Base Protocol January 2011 8.5.2. Abort-Session-Answer - The Abort-Session-Answer (ASA), indicated by the Command-Code set to + The Abort-Session-Answer (ASA), indicated by the Command Code set to 274 and the message flags' 'R' bit clear, is sent in response to the - ASR. The Result-Code AVP MUST be present, and indicates the + ASR. The Result-Code AVP MUST be present and indicates the disposition of the request. If the session identified by Session-Id in the ASR was successfully - terminated, Result-Code is set to DIAMETER_SUCCESS. If the session - is not currently active, Result-Code is set to + terminated, the Result-Code is set to DIAMETER_SUCCESS. If the + session is not currently active, the Result-Code is set to DIAMETER_UNKNOWN_SESSION_ID. If the access device does not stop the - session for any other reason, Result-Code is set to + session for any other reason, the Result-Code is set to DIAMETER_UNABLE_TO_COMPLY. - Message Format + + + + + + + + + + +Fajardo, et al. Standards Track [Page 114] + +RFC 6733 Diameter Base Protocol October 2012 + + + Message Format <ASA> ::= < Diameter Header: 274, PXY > < Session-Id > @@ -6545,14 +6406,6 @@ Internet-Draft Diameter Base Protocol January 2011 * [ Proxy-Info ] * [ AVP ] - - - -Fajardo, et al. Expires July 24, 2011 [Page 117] - -Internet-Draft Diameter Base Protocol January 2011 - - 8.6. Inferring Session Termination from Origin-State-Id The Origin-State-Id is used to allow detection of terminated sessions @@ -6560,94 +6413,96 @@ Internet-Draft Diameter Base Protocol January 2011 shutdown of an access device. A Diameter client or access device increments the value of the - Origin-State-Id every time it is started or powered-up. The new + Origin-State-Id every time it is started or powered up. The new Origin-State-Id is then sent in the CER/CEA message immediately upon connection to the server. The Diameter server receiving the new Origin-State-Id can determine whether the sending Diameter client had - abruptly shutdown by comparing the old value of the Origin-State-Id + abruptly shut down by comparing the old value of the Origin-State-Id it has kept for that specific client is less than the new value and whether it has un-terminated sessions originating from that client. An access device can also include the Origin-State-Id in request - messages other than CER if there are relays or proxies in between the - access device and the server. In this case, however, the server + messages other than the CER if there are relays or proxies in between + the access device and the server. In this case, however, the server cannot discover that the access device has been restarted unless and - until it receives a new request from it. Therefore this mechanism is - more opportunistic across proxies and relays. + until it receives a new request from it. Therefore, this mechanism + is more opportunistic across proxies and relays. The Diameter server may assume that all sessions that were active prior to detection of a client restart have been terminated. The Diameter server MAY clean up all session state associated with such - lost sessions, and MAY also issues STRs for all such lost sessions + lost sessions, and it MAY also issue STRs for all such lost sessions that were authorized on upstream servers, to allow session state to be cleaned up globally. + + + + +Fajardo, et al. Standards Track [Page 115] + +RFC 6733 Diameter Base Protocol October 2012 + + 8.7. Auth-Request-Type AVP The Auth-Request-Type AVP (AVP Code 274) is of type Enumerated and is included in application-specific auth requests to inform the peers - whether a user is to be authenticated only, authorized only or both. + whether a user is to be authenticated only, authorized only, or both. Note any value other than both MAY cause RADIUS interoperability issues. The following values are defined: - AUTHENTICATE_ONLY 1 - The request being sent is for authentication only, and MUST - contain the relevant application specific authentication AVPs that + The request being sent is for authentication only, and it MUST + contain the relevant application-specific authentication AVPs that are needed by the Diameter server to authenticate the user. - - - - - - - -Fajardo, et al. Expires July 24, 2011 [Page 118] - -Internet-Draft Diameter Base Protocol January 2011 - - AUTHORIZE_ONLY 2 - The request being sent is for authorization only, and MUST contain - the application-specific authorization AVPs that are necessary to - identify the service being requested/offered. - + The request being sent is for authorization only, and it MUST + contain the application-specific authorization AVPs that are + necessary to identify the service being requested/offered. AUTHORIZE_AUTHENTICATE 3 The request contains a request for both authentication and authorization. The request MUST include both the relevant - application-specific authentication information, and authorization + application-specific authentication information and authorization information necessary to identify the service being requested/ offered. - 8.8. Session-Id AVP The Session-Id AVP (AVP Code 263) is of type UTF8String and is used to identify a specific session (see Section 8). All messages - pertaining to a specific session MUST include only one Session-Id AVP - and the same value MUST be used throughout the life of a session. - When present, the Session-Id SHOULD appear immediately following the - Diameter Header (see Section 3). + pertaining to a specific session MUST include only one Session-Id + AVP, and the same value MUST be used throughout the life of a + session. When present, the Session-Id SHOULD appear immediately + following the Diameter header (see Section 3). The Session-Id MUST be globally and eternally unique, as it is meant to uniquely identify a user session without reference to any other - information, and may be needed to correlate historical authentication - information with accounting information. The Session-Id includes a - mandatory portion and an implementation-defined portion; a - recommended format for the implementation-defined portion is outlined - below. + information, and it may be needed to correlate historical + authentication information with accounting information. The + Session-Id includes a mandatory portion and an implementation-defined + portion; a recommended format for the implementation-defined portion + is outlined below. The Session-Id MUST begin with the sender's identity encoded in the - DiameterIdentity type (see Section 4.4). The remainder of the - Session-Id is delimited by a ";" character, and MAY be any sequence - that the client can guarantee to be eternally unique; however, the - following format is recommended, (square brackets [] indicate an - optional element): + DiameterIdentity type (see Section 4.3.1). The remainder of the + Session-Id is delimited by a ";" character, and it MAY be any + + + +Fajardo, et al. Standards Track [Page 116] + +RFC 6733 Diameter Base Protocol October 2012 + + + sequence that the client can guarantee to be eternally unique; + however, the following format is recommended, (square brackets [] + indicate an optional element): <DiameterIdentity>;<high 32 bits>;<low 32 bits>[;<optional value>] @@ -6657,22 +6512,14 @@ Internet-Draft Diameter Base Protocol January 2011 processors. At startup, the high 32 bits of the 64-bit value MAY be initialized to the time in NTP format [RFC5905], and the low 32 bits MAY be initialized to zero. This will for practical purposes - - - -Fajardo, et al. Expires July 24, 2011 [Page 119] - -Internet-Draft Diameter Base Protocol January 2011 - - eliminate the possibility of overlapping Session-Ids after a reboot, assuming the reboot process takes longer than a second. Alternatively, an implementation MAY keep track of the increasing value in non-volatile memory. - <optional value> is implementation specific but may include a modem's - device Id, a layer 2 address, timestamp, etc. + <optional value> is implementation specific, but it may include a + modem's device Id, a Layer 2 address, timestamp, etc. Example, in which there is no optional value: @@ -6683,45 +6530,44 @@ Internet-Draft Diameter Base Protocol January 2011 accesspoint7.example.com;1876543210;523;[email protected] The Session-Id is created by the Diameter application initiating the - session, which in most cases is done by the client. Note that a - Session-Id MAY be used for both the authentication, authorization and - accounting commands of a given application. + session, which, in most cases, is done by the client. Note that a + Session-Id MAY be used for both the authentication, authorization, + and accounting commands of a given application. 8.9. Authorization-Lifetime AVP The Authorization-Lifetime AVP (AVP Code 291) is of type Unsigned32 and contains the maximum number of seconds of service to be provided to the user before the user is to be re-authenticated and/or re- - authorized. Care should be taken when the Authorization- Lifetime - value is determined, since a low, non-zero, value could create + authorized. Care should be taken when the Authorization-Lifetime + value is determined, since a low, non-zero value could create significant Diameter traffic, which could congest both the network and the agents. A value of zero (0) means that immediate re-auth is necessary by the access device. The absence of this AVP, or a value of all ones - (meaning all bits in the 32 bit field are set to one) means no re- + (meaning all bits in the 32-bit field are set to one) means no re- auth is expected. + + +Fajardo, et al. Standards Track [Page 117] + +RFC 6733 Diameter Base Protocol October 2012 + + If both this AVP and the Session-Timeout AVP are present in a message, the value of the latter MUST NOT be smaller than the Authorization-Lifetime AVP. An Authorization-Lifetime AVP MAY be present in re-authorization - messages, and contains the number of seconds the user is authorized - to receive service from the time the re-auth answer message is - received by the access device. + messages, and it contains the number of seconds the user is + authorized to receive service from the time the re-auth answer + message is received by the access device. This AVP MAY be provided by the client as a hint of the maximum lifetime that it is willing to accept. The server MUST return a - - - -Fajardo, et al. Expires July 24, 2011 [Page 120] - -Internet-Draft Diameter Base Protocol January 2011 - - - value that is equal to, or smaller, than the one provided by the + value that is equal to, or smaller than, the one provided by the client. 8.10. Auth-Grace-Period AVP @@ -6739,7 +6585,6 @@ Internet-Draft Diameter Base Protocol January 2011 the value in the server's answer message is binding. The following values are supported: - STATE_MAINTAINED 0 This value is used to specify that session state is being @@ -6747,46 +6592,42 @@ Internet-Draft Diameter Base Protocol January 2011 message when service to the user is terminated. This is the default value. - NO_STATE_MAINTAINED 1 This value is used to specify that no session termination messages will be sent by the access device upon expiration of the Authorization-Lifetime. - 8.12. Re-Auth-Request-Type AVP The Re-Auth-Request-Type AVP (AVP Code 285) is of type Enumerated and is included in application-specific auth answers to inform the client of the action expected upon expiration of the Authorization-Lifetime. - If the answer message contains an Authorization-Lifetime AVP with a - positive value, the Re-Auth-Request-Type AVP MUST be present in an - answer message. The following values are defined: - AUTHORIZE_ONLY 0 - An authorization only re-auth is expected upon expiration of the - Authorization-Lifetime. This is the default value if the AVP is +Fajardo, et al. Standards Track [Page 118] + +RFC 6733 Diameter Base Protocol October 2012 -Fajardo, et al. Expires July 24, 2011 [Page 121] - -Internet-Draft Diameter Base Protocol January 2011 + If the answer message contains an Authorization-Lifetime AVP with a + positive value, the Re-Auth-Request-Type AVP MUST be present in an + answer message. The following values are defined: + AUTHORIZE_ONLY 0 + An authorization only re-auth is expected upon expiration of the + Authorization-Lifetime. This is the default value if the AVP is not present in answer messages that include the Authorization- Lifetime. - AUTHORIZE_AUTHENTICATE 1 An authentication and authorization re-auth is expected upon expiration of the Authorization-Lifetime. - 8.13. Session-Timeout AVP The Session-Timeout AVP (AVP Code 27) [RFC2865] is of type Unsigned32 @@ -6799,10 +6640,10 @@ Internet-Draft Diameter Base Protocol January 2011 A session that terminates on an access device due to the expiration of the Session-Timeout MUST cause an STR to be issued, unless both the access device and the home server had previously agreed that no - session termination messages would be sent (see Section 8.11). + session termination messages would be sent (see Section 8). A Session-Timeout AVP MAY be present in a re-authorization answer - message, and contains the remaining number of seconds from the + message, and it contains the remaining number of seconds from the beginning of the re-auth. A value of zero, or the absence of this AVP, means that this session @@ -6810,7 +6651,7 @@ Internet-Draft Diameter Base Protocol January 2011 This AVP MAY be provided by the client as a hint of the maximum timeout that it is willing to accept. However, the server MAY return - a value that is equal to, or smaller, than the one provided by the + a value that is equal to, or smaller than, the one provided by the client. 8.14. User-Name AVP @@ -6819,83 +6660,29 @@ Internet-Draft Diameter Base Protocol January 2011 contains the User-Name, in a format consistent with the NAI specification [RFC4282]. -8.15. Termination-Cause AVP - - The Termination-Cause AVP (AVP Code 295) is of type Enumerated, and - is used to indicate the reason why a session was terminated on the - access device. The following values are defined: - -Fajardo, et al. Expires July 24, 2011 [Page 122] +Fajardo, et al. Standards Track [Page 119] -Internet-Draft Diameter Base Protocol January 2011 - - - DIAMETER_LOGOUT 1 - - The user initiated a disconnect - - - DIAMETER_SERVICE_NOT_PROVIDED 2 - - This value is used when the user disconnected prior to the receipt - of the authorization answer message. - - - DIAMETER_BAD_ANSWER 3 - - This value indicates that the authorization answer received by the - access device was not processed successfully. - - - DIAMETER_ADMINISTRATIVE 4 - - The user was not granted access, or was disconnected, due to - administrative reasons, such as the receipt of a Abort-Session- - Request message. - - - DIAMETER_LINK_BROKEN 5 - - The communication to the user was abruptly disconnected. - - - DIAMETER_AUTH_EXPIRED 6 - - The user's access was terminated since its authorized session time - has expired. - - - DIAMETER_USER_MOVED 7 - - The user is receiving services from another access device. - - - DIAMETER_SESSION_TIMEOUT 8 +RFC 6733 Diameter Base Protocol October 2012 - The user's session has timed out, and service has been terminated. +8.15. Termination-Cause AVP - - - - - - -Fajardo, et al. Expires July 24, 2011 [Page 123] - -Internet-Draft Diameter Base Protocol January 2011 - + The Termination-Cause AVP (AVP Code 295) is of type Enumerated, and + is used to indicate the reason why a session was terminated on the + access device. The currently assigned values for this AVP can be + found in the IANA registry for Termination-Cause AVP Values + [IANATCV]. 8.16. Origin-State-Id AVP The Origin-State-Id AVP (AVP Code 278), of type Unsigned32, is a monotonically increasing value that is advanced whenever a Diameter - entity restarts with loss of previous state, for example upon reboot. - Origin-State-Id MAY be included in any Diameter message, including - CER. + entity restarts with loss of previous state, for example, upon + reboot. Origin-State-Id MAY be included in any Diameter message, + including CER. A Diameter entity issuing this AVP MUST create a higher value for this AVP each time its state is reset. A Diameter entity MAY set @@ -6911,20 +6698,34 @@ Internet-Draft Diameter Base Protocol January 2011 message, it allows other Diameter entities to infer that sessions associated with a lower Origin-State-Id are no longer active. If an access device does not intend for such inferences to be made, it MUST - either not include Origin-State-Id in any message, or set its value - to 0. + either not include Origin-State-Id in any message or set its value to + 0. 8.17. Session-Binding AVP - The Session-Binding AVP (AVP Code 270) is of type Unsigned32, and MAY - be present in application-specific authorization answer messages. If - present, this AVP MAY inform the Diameter client that all future + The Session-Binding AVP (AVP Code 270) is of type Unsigned32, and it + MAY be present in application-specific authorization answer messages. + If present, this AVP MAY inform the Diameter client that all future application-specific re-auth and Session-Termination-Request messages for this session MUST be sent to the same authorization server. - This field is a bit mask, and the following bits have been defined: + + + + + + + + +Fajardo, et al. Standards Track [Page 120] + +RFC 6733 Diameter Base Protocol October 2012 + + + This field is a bit mask, and the following bits have been defined: + RE_AUTH 1 When set, future re-auth messages for this session MUST NOT @@ -6932,23 +6733,13 @@ Internet-Draft Diameter Base Protocol January 2011 value, the Destination-Host AVP MUST be present in all re-auth messages for this session. - STR 2 When set, the STR message for this session MUST NOT include the Destination-Host AVP. When cleared, the default value, the - - - -Fajardo, et al. Expires July 24, 2011 [Page 124] - -Internet-Draft Diameter Base Protocol January 2011 - - Destination-Host AVP MUST be present in the STR message for this session. - ACCOUNTING 4 When set, all accounting messages for this session MUST NOT @@ -6956,10 +6747,9 @@ Internet-Draft Diameter Base Protocol January 2011 value, the Destination-Host AVP, if known, MUST be present in all accounting messages for this session. - 8.18. Session-Server-Failover AVP - The Session-Server-Failover AVP (AVP Code 271) is of type Enumerated, + The Session-Server-Failover AVP (AVP Code 271) is of type Enumerated and MAY be present in application-specific authorization answer messages that either do not include the Session-Binding AVP or include the Session-Binding AVP with any of the bits set to a zero @@ -6970,11 +6760,24 @@ Internet-Draft Diameter Base Protocol January 2011 The following values are supported: - REFUSE_SERVICE 0 If either the re-auth or the STR message delivery fails, terminate - service with the user, and do not attempt any subsequent attempts. + service with the user and do not attempt any subsequent attempts. + + + + + + + + + + + +Fajardo, et al. Standards Track [Page 121] + +RFC 6733 Diameter Base Protocol October 2012 TRY_AGAIN 1 @@ -6982,34 +6785,23 @@ Internet-Draft Diameter Base Protocol January 2011 If either the re-auth or the STR message delivery fails, resend the failed message without the Destination-Host AVP present. - ALLOW_SERVICE 2 If re-auth message delivery fails, assume that re-authorization succeeded. If STR message delivery fails, terminate the session. - TRY_AGAIN_ALLOW_SERVICE 3 If either the re-auth or the STR message delivery fails, resend the failed message without the Destination-Host AVP present. If - - - -Fajardo, et al. Expires July 24, 2011 [Page 125] - -Internet-Draft Diameter Base Protocol January 2011 - - the second delivery fails for re-auth, assume re-authorization succeeded. If the second delivery fails for STR, terminate the session. - 8.19. Multi-Round-Time-Out AVP - The Multi-Round-Time-Out AVP (AVP Code 272) is of type Unsigned32, - and SHOULD be present in application-specific authorization answer + The Multi-Round-Time-Out AVP (AVP Code 272) is of type Unsigned32 and + SHOULD be present in application-specific authorization answer messages whose Result-Code AVP is set to DIAMETER_MULTI_ROUND_AUTH. This AVP contains the maximum number of seconds that the access device MUST provide the user in responding to an authentication @@ -7031,37 +6823,24 @@ Internet-Draft Diameter Base Protocol January 2011 8.21. Event-Timestamp AVP - The Event-Timestamp (AVP Code 55) is of type Time, and MAY be - included in an Accounting-Request and Accounting-Answer messages to - record the time that the reported event occurred, in seconds since - January 1, 1900 00:00 UTC. - - + The Event-Timestamp (AVP Code 55) is of type Time and MAY be included + in an Accounting-Request and Accounting-Answer messages to record the + time that the reported event occurred, in seconds since January 1, + 1900 00:00 UTC. - - - - - - - - - - - -Fajardo, et al. Expires July 24, 2011 [Page 126] +Fajardo, et al. Standards Track [Page 122] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 9. Accounting This accounting protocol is based on a server directed model with capabilities for real-time delivery of accounting information. - Several fault resilience methods [RFC2975] have been built in to the + Several fault resilience methods [RFC2975] have been built into the protocol in order minimize loss of accounting data in various fault situations and under different assumptions about the capabilities of the used devices. @@ -7075,15 +6854,16 @@ Internet-Draft Diameter Base Protocol January 2011 timeliness requirements. As discussed in [RFC2975], real-time transfer of accounting records - is a requirement, such as the need to perform credit limit checks and + is a requirement, such as the need to perform credit-limit checks and fraud detection. Note that batch accounting is not a requirement, and is therefore not supported by Diameter. Should batched accounting be required in the future, a new Diameter application will need to be created, or it could be handled using another protocol. - Note, however, that even if at the Diameter layer accounting requests - are processed one by one, transport protocols used under Diameter - typically batch several requests in the same packet under heavy - traffic conditions. This may be sufficient for many applications. + Note, however, that even if at the Diameter layer, accounting + requests are processed one by one; transport protocols used under + Diameter typically batch several requests in the same packet under + heavy traffic conditions. This may be sufficient for many + applications. The authorization server (chain) directs the selection of proper transfer strategy, based on its knowledge of the user and @@ -7097,7 +6877,7 @@ Internet-Draft Diameter Base Protocol January 2011 records from the Diameter client is delayed or unsuccessful. The Diameter accounting server MAY override the interim interval or - the realtime requirements by including the Acct-Interim-Interval or + the real-time requirements by including the Acct-Interim-Interval or Accounting-Realtime-Required AVP in the Accounting-Answer message. When one of these AVPs is present, the latest value received SHOULD be used in further accounting activities for the same session. @@ -7107,16 +6887,15 @@ Internet-Draft Diameter Base Protocol January 2011 - -Fajardo, et al. Expires July 24, 2011 [Page 127] +Fajardo, et al. Standards Track [Page 123] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 9.2. Protocol Messages A Diameter node that receives a successful authentication and/or - authorization messages from the Diameter server SHOULD collect + authorization message from the Diameter server SHOULD collect accounting information for the session. The Accounting-Request message is used to transmit the accounting information to the Diameter server, which MUST reply with the Accounting-Answer message @@ -7129,12 +6908,12 @@ Internet-Draft Diameter Base Protocol January 2011 9.3. Accounting Application Extension and Requirements - Each Diameter application (e.g., NASREQ, MobileIP), SHOULD define - their Service-Specific AVPs that MUST be present in the Accounting- - Request message in a section entitled "Accounting AVPs". The - application MUST assume that the AVPs described in this document will - be present in all Accounting messages, so only their respective - service-specific AVPs need to be defined in that section. + Each Diameter application (e.g., NASREQ, Mobile IP) SHOULD define its + service-specific AVPs that MUST be present in the Accounting-Request + message in a section titled "Accounting AVPs". The application MUST + assume that the AVPs described in this document will be present in + all Accounting messages, so only their respective service-specific + AVPs need to be defined in that section. Applications have the option of using one or both of the following accounting application extension models: @@ -7150,40 +6929,37 @@ Internet-Draft Diameter Base Protocol January 2011 advertise the Diameter base accounting Application Id during capabilities exchange. - Coupled Accounting Service - The accounting messages will carry the Application Id of the + The accounting message will carry the Application Id of the application that is using it. The application itself will process the received accounting records or forward them to an accounting server. There is no accounting application advertisement required - during capabilities exchange and the accounting messages will be - routed the same as any of the other application messages. - + during capabilities exchange, and the accounting messages will be + routed the same way as any of the other application messages. + In cases where an application does not define its own accounting + service, it is preferred that the split accounting model be used. -Fajardo, et al. Expires July 24, 2011 [Page 128] +Fajardo, et al. Standards Track [Page 124] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 - In cases where an application does not define its own accounting - service, it is preferred that the split accounting model be used. - 9.4. Fault Resilience - Diameter Base protocol mechanisms are used to overcome small message - loss and network faults of temporary nature. + Diameter base protocol mechanisms are used to overcome small message + loss and network faults of a temporary nature. Diameter peers acting as clients MUST implement the use of failover to guard against server failures and certain network failures. Diameter peers acting as agents or related off-line processing systems MUST detect duplicate accounting records caused by the - sending of same record to several servers and duplication of messages - in transit. This detection MUST be based on the inspection of the - Session-Id and Accounting-Record-Number AVP pairs. Appendix C + sending of the same record to several servers and duplication of + messages in transit. This detection MUST be based on the inspection + of the Session-Id and Accounting-Record-Number AVP pairs. Appendix C discusses duplicate detection needs and implementation issues. Diameter clients MAY have non-volatile memory for the safe storage of @@ -7191,23 +6967,23 @@ Internet-Draft Diameter Base Protocol January 2011 partitions, and server failures. If such memory is available, the client SHOULD store new accounting records there as soon as the records are created and until a positive acknowledgement of their - reception from the Diameter Server has been received. Upon a reboot, - the client MUST starting sending the records in the non-volatile - memory to the accounting server with appropriate modifications in + reception from the Diameter server has been received. Upon a reboot, + the client MUST start sending the records in the non-volatile memory + to the accounting server with the appropriate modifications in termination cause, session length, and other relevant information in the records. A further application of this protocol may include AVPs to control - how many accounting records may at most be stored in the Diameter - client without committing them to the non-volatile memory or + the maximum number of accounting records that may be stored in the + Diameter client without committing them to the non-volatile memory or transferring them to the Diameter server. The client SHOULD NOT remove the accounting data from any of its memory areas before the correct Accounting-Answer has been received. - The client MAY remove oldest, undelivered or yet unacknowledged - accounting data if it runs out of resources such as memory. It is an - implementation dependent matter for the client to accept new sessions - under this condition. + The client MAY remove the oldest, undelivered, or as yet + unacknowledged accounting data if it runs out of resources such as + memory. It is an implementation-dependent matter for the client to + accept new sessions under this condition. 9.5. Accounting Records @@ -7217,15 +6993,17 @@ Internet-Draft Diameter Base Protocol January 2011 Different types of accounting records are sent depending on the actual type of accounted service and the authorization server's + directions for interim accounting. If the accounted service is a + + -Fajardo, et al. Expires July 24, 2011 [Page 129] +Fajardo, et al. Standards Track [Page 125] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 - directions for interim accounting. If the accounted service is a one-time event, meaning that the start and stop of the event are simultaneous, then the Accounting-Record-Type AVP MUST be present and set to the value EVENT_RECORD. @@ -7251,11 +7029,11 @@ Internet-Draft Diameter Base Protocol January 2011 session. A particular value of Accounting-Sub-Session-Id MUST appear only in - one sequence of accounting records from a DIAMETER client, except for + one sequence of accounting records from a Diameter client, except for the purposes of retransmission. The one sequence that is sent MUST be either one record with Accounting-Record-Type AVP set to the value - EVENT_RECORD, or several records starting with one having the value - START_RECORD, followed by zero or more INTERIM_RECORD and a single + EVENT_RECORD or several records starting with one having the value + START_RECORD, followed by zero or more INTERIM_RECORDs and a single STOP_RECORD. A particular Diameter application specification MUST define the type of sequences that MUST be used. @@ -7265,20 +7043,21 @@ Internet-Draft Diameter Base Protocol January 2011 accounting records with a specific application session by using the Session-Id of the particular application session in the accounting messages. Accounting messages MAY also use a different Session-Id - from that of the application sessions in which case other session + from that of the application sessions, in which case, other session- related information is needed to perform correlation. In cases where an application requires multiple accounting sub- - session, an Accounting-Sub-Session-Id AVP is used to differentiate + sessions, an Accounting-Sub-Session-Id AVP is used to differentiate each sub-session. The Session-Id would remain constant for all sub- - sessions and is be used to correlate all the sub-sessions to a + sessions and is used to correlate all the sub-sessions to a particular application session. Note that receiving a STOP_RECORD -Fajardo, et al. Expires July 24, 2011 [Page 130] + +Fajardo, et al. Standards Track [Page 126] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 with no Accounting-Sub-Session-Id AVP when sub-sessions were @@ -7290,36 +7069,36 @@ Internet-Draft Diameter Base Protocol January 2011 record may span multiple different Diameter applications and sessions used by the same user at a given time. In such cases, the Acct- Multi-Session-Id AVP is used. The Acct-Multi-Session-Id AVP SHOULD - be signaled by the server to the access device (typically during + be signaled by the server to the access device (typically, during authorization) when it determines that a request belongs to an existing session. The access device MUST then include the Acct- Multi-Session-Id AVP in all subsequent accounting messages. The Acct-Multi-Session-Id AVP MAY include the value of the original - Session-Id. It's contents are implementation specific, but MUST be - globally unique across other Acct-Multi-Session-Id, and MUST NOT + Session-Id. Its contents are implementation specific, but the MUST + be globally unique across other Acct-Multi-Session-Ids and MUST NOT change during the life of a session. A Diameter application document MUST define the exact concept of a - session that is being accounted, and MAY define the concept of a + session that is being accounted, and it MAY define the concept of a multi-session. For instance, the NASREQ DIAMETER application treats - a single PPP connection to a Network Access Server as one session, - and a set of Multilink PPP sessions as one multi-session. + a single PPP connection to a Network Access Server as one session and + a set of Multilink PPP sessions as one multi-session. -9.7. Accounting Command-Codes +9.7. Accounting Command Codes - This section defines Command-Code values that MUST be supported by - all Diameter implementations that provide Accounting services. + This section defines Command Code values that MUST be supported by + all Diameter implementations that provide accounting services. 9.7.1. Accounting-Request - The Accounting-Request (ACR) command, indicated by the Command-Code + The Accounting-Request (ACR) command, indicated by the Command Code field set to 271 and the Command Flags' 'R' bit set, is sent by a Diameter node, acting as a client, in order to exchange accounting information with a peer. - The AVP listed below SHOULD include service-specific accounting AVPs, - as described in Section 9.3. + In addition to the AVPs listed below, Accounting-Request messages + SHOULD include service-specific accounting AVPs. @@ -7332,9 +7111,9 @@ Internet-Draft Diameter Base Protocol January 2011 -Fajardo, et al. Expires July 24, 2011 [Page 131] +Fajardo, et al. Standards Track [Page 127] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 Message Format @@ -7363,16 +7142,16 @@ Internet-Draft Diameter Base Protocol January 2011 9.7.2. Accounting-Answer - The Accounting-Answer (ACA) command, indicated by the Command-Code + The Accounting-Answer (ACA) command, indicated by the Command Code field set to 271 and the Command Flags' 'R' bit cleared, is used to acknowledge an Accounting-Request command. The Accounting-Answer command contains the same Session-Id as the corresponding request. - Only the target Diameter Server, known as the home Diameter Server, + Only the target Diameter server, known as the home Diameter server, SHOULD respond with the Accounting-Answer command. - The AVP listed below SHOULD include service-specific accounting AVPs, - as described in Section 9.3. + In addition to the AVPs listed below, Accounting-Answer messages + SHOULD include service-specific accounting AVPs. @@ -7388,9 +7167,9 @@ Internet-Draft Diameter Base Protocol January 2011 -Fajardo, et al. Expires July 24, 2011 [Page 132] +Fajardo, et al. Standards Track [Page 128] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 Message Format @@ -7429,13 +7208,12 @@ Internet-Draft Diameter Base Protocol January 2011 and contains the type of accounting record being sent. The following values are currently defined for the Accounting-Record-Type AVP: - EVENT_RECORD 1 An Accounting Event Record is used to indicate that a one-time event has occurred (meaning that the start and end of the event are simultaneous). This record contains all information relevant - to the service, and is the only record of the service. + to the service, and it is the only record of the service. @@ -7444,20 +7222,20 @@ Internet-Draft Diameter Base Protocol January 2011 -Fajardo, et al. Expires July 24, 2011 [Page 133] + +Fajardo, et al. Standards Track [Page 129] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 START_RECORD 2 - An Accounting Start, Interim, and Stop Records are used to - indicate that a service of a measurable length has been given. An - Accounting Start Record is used to initiate an accounting session, + Accounting Start, Interim, and Stop Records are used to indicate + that a service of a measurable length has been given. An + Accounting Start Record is used to initiate an accounting session and contains accounting information that is relevant to the initiation of the session. - INTERIM_RECORD 3 An Interim Accounting Record contains cumulative accounting @@ -7468,14 +7246,12 @@ Internet-Draft Diameter Base Protocol January 2011 applications. The selection of whether to use INTERIM_RECORD records is done by the Acct-Interim-Interval AVP. - STOP_RECORD 4 An Accounting Stop Record is sent to terminate an accounting session and contains cumulative accounting information relevant to the existing session. - 9.8.2. Acct-Interim-Interval AVP The Acct-Interim-Interval AVP (AVP Code 85) is of type Unsigned32 and @@ -7483,31 +7259,31 @@ Internet-Draft Diameter Base Protocol January 2011 client. The client uses information in this AVP to decide how and when to produce accounting records. With different values in this AVP, service sessions can result in one, two, or two+N accounting - records, based on the needs of the home-organization. The following + records, based on the needs of the home organization. The following accounting record production behavior is directed by the inclusion of this AVP: - 1. The omission of the Acct-Interim-Interval AVP or its inclusion with Value field set to 0 means that EVENT_RECORD, START_RECORD, and STOP_RECORD are produced, as appropriate for the service. - 2. The inclusion of the AVP with Value field set to a non-zero value means that INTERIM_RECORD records MUST be produced between the START_RECORD and STOP_RECORD records. The Value field of this AVP is the nominal interval between these records in seconds. + The Diameter node that originates the accounting information, + known as the client, MUST produce the first INTERIM_RECORD record + roughly at the time when this nominal interval has elapsed from + + -Fajardo, et al. Expires July 24, 2011 [Page 134] +Fajardo, et al. Standards Track [Page 130] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 - The Diameter node that originates the accounting information, - known as the client, MUST produce the first INTERIM_RECORD record - roughly at the time when this nominal interval has elapsed from the START_RECORD, the next one again as the interval has elapsed once more, and so on until the session ends and a STOP_RECORD record is produced. @@ -7522,10 +7298,10 @@ Internet-Draft Diameter Base Protocol January 2011 The Accounting-Record-Number AVP (AVP Code 485) is of type Unsigned32 and identifies this record within one session. As Session-Id AVPs are globally unique, the combination of Session-Id and Accounting- - Record-Number AVPs is also globally unique, and can be used in + Record-Number AVPs is also globally unique and can be used in matching accounting records with confirmations. An easy way to produce unique numbers is to set the value to 0 for records of type - EVENT_RECORD and START_RECORD, and set the value to 1 for the first + EVENT_RECORD and START_RECORD and set the value to 1 for the first INTERIM_RECORD, 2 for the second, and so on until the value for STOP_RECORD is one more than for the last INTERIM_RECORD. @@ -7539,10 +7315,10 @@ Internet-Draft Diameter Base Protocol January 2011 The Acct-Multi-Session-Id AVP (AVP Code 50) is of type UTF8String, following the format specified in Section 8.8. The Acct-Multi- - Session-Id AVP is used to link together multiple related accounting - sessions, where each session would have a unique Session-Id, but the - same Acct-Multi-Session-Id AVP. This AVP MAY be returned by the - Diameter server in an authorization answer, and MUST be used in all + Session-Id AVP is used to link multiple related accounting sessions, + where each session would have a unique Session-Id but the same Acct- + Multi-Session-Id AVP. This AVP MAY be returned by the Diameter + server in an authorization answer, and it MUST be used in all accounting messages for the given session. 9.8.6. Accounting-Sub-Session-Id AVP @@ -7553,18 +7329,17 @@ Internet-Draft Diameter Base Protocol January 2011 session, and the value of this AVP MUST be monotonically increased by one for all new sub-sessions. The absence of this AVP implies no sub-sessions are in use, with the exception of an Accounting-Request + whose Accounting-Record-Type is set to STOP_RECORD. A STOP_RECORD + message with no Accounting-Sub-Session-Id AVP present will signal the + termination of all sub-sessions for a given Session-Id. -Fajardo, et al. Expires July 24, 2011 [Page 135] +Fajardo, et al. Standards Track [Page 131] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 - whose Accounting-Record-Type is set to STOP_RECORD. A STOP_RECORD - message with no Accounting-Sub-Session-Id AVP present will signal the - termination of all sub-sessions for a given Session-Id. - 9.8.7. Accounting-Realtime-Required AVP The Accounting-Realtime-Required AVP (AVP Code 483) is of type @@ -7574,7 +7349,6 @@ Internet-Draft Diameter Base Protocol January 2011 if the sending of accounting records to the accounting server has been temporarily prevented due to, for instance, a network problem. - DELIVER_AND_GRANT 1 The AVP with Value field set to DELIVER_AND_GRANT means that the @@ -7584,7 +7358,6 @@ Internet-Draft Diameter Base Protocol January 2011 the accounting record stream to a backup server is not a reason to discontinue the service to the user. - GRANT_AND_STORE 2 The AVP with Value field set to GRANT_AND_STORE means that service @@ -7594,60 +7367,51 @@ Internet-Draft Diameter Base Protocol January 2011 This is the default behavior if the AVP isn't included in the reply from the authorization server. - GRANT_AND_LOSE 3 The AVP with Value field set to GRANT_AND_LOSE means that service SHOULD be granted even if the records cannot be delivered or stored. +10. AVP Occurrence Tables + The following tables present the AVPs defined in this document and + specify in which Diameter messages they MAY or MAY NOT be present. + AVPs that occur only inside a Grouped AVP are not shown in these + tables. + The tables use the following symbols: + 0 The AVP MUST NOT be present in the message. + 0+ Zero or more instances of the AVP MAY be present in the + message. - - -Fajardo, et al. Expires July 24, 2011 [Page 136] +Fajardo, et al. Standards Track [Page 132] -Internet-Draft Diameter Base Protocol January 2011 - - -10. AVP Occurrence Table - - The following tables presents the AVPs defined in this document, and - specifies in which Diameter messages they MAY be present or not. - AVPs that occur only inside a Grouped AVP are not shown in this - table. +RFC 6733 Diameter Base Protocol October 2012 - The table uses the following symbols: + 0-1 Zero or one instance of the AVP MAY be present in the message. + It is considered an error if there are more than one instance + of the AVP. - 0 The AVP MUST NOT be present in the message. + 1 One instance of the AVP MUST be present in the message. - 0+ Zero or more instances of the AVP MAY be present in the - message. - - 0-1 Zero or one instance of the AVP MAY be present in the message. - It is considered an error if there are more than one instance of - the AVP. - - 1 One instance of the AVP MUST be present in the message. - - 1+ At least one instance of the AVP MUST be present in the - message. + 1+ At least one instance of the AVP MUST be present in the + message. 10.1. Base Protocol Command AVP Table - The table in this section is limited to the non-accounting Command + The table in this section is limited to the non-Accounting Command Codes defined in this specification. +-----------------------------------------------+ - | Command-Code | + | Command Code | +---+---+---+---+---+---+---+---+---+---+---+---+ Attribute Name |CER|CEA|DPR|DPA|DWR|DWA|RAR|RAA|ASR|ASA|STR|STA| --------------------+---+---+---+---+---+---+---+---+---+---+---+---+ @@ -7665,22 +7429,29 @@ Internet-Draft Diameter Base Protocol January 2011 Class |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0+ |0+ | Destination-Host |0 |0 |0 |0 |0 |0 |1 |0 |1 |0 |0-1|0 | Destination-Realm |0 |0 |0 |0 |0 |0 |1 |0 |1 |0 |1 |0 | - - - -Fajardo, et al. Expires July 24, 2011 [Page 137] - -Internet-Draft Diameter Base Protocol January 2011 - - Disconnect-Cause |0 |0 |1 |0 |0 |0 |0 |0 |0 |0 |0 |0 | Error-Message |0 |0-1|0 |0-1|0 |0-1|0 |0-1|0 |0-1|0 |0-1| Error-Reporting-Host|0 |0 |0 |0 |0 |0 |0 |0-1|0 |0-1|0 |0-1| - Failed-AVP |0 |0+ |0 |0+ |0 |0+ |0 |0+ |0 |0+ |0 |0+ | + Failed-AVP |0 |0-1|0 |0-1|0 |0-1|0 |0-1|0 |0-1|0 |0-1| Firmware-Revision |0-1|0-1|0 |0 |0 |0 |0 |0 |0 |0 |0 |0 | Host-IP-Address |1+ |1+ |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 | Inband-Security-Id |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 | Multi-Round-Time-Out|0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 |0 | + + + + + + + + + + +Fajardo, et al. Standards Track [Page 133] + +RFC 6733 Diameter Base Protocol October 2012 + + Origin-Host |1 |1 |1 |1 |1 |1 |1 |1 |1 |1 |1 |1 | Origin-Realm |1 |1 |1 |1 |1 |1 |1 |1 |1 |1 |1 |1 | Origin-State-Id |0-1|0-1|0 |0 |0-1|0-1|0-1|0-1|0-1|0-1|0-1|0-1| @@ -7724,9 +7495,17 @@ Internet-Draft Diameter Base Protocol January 2011 -Fajardo, et al. Expires July 24, 2011 [Page 138] + + + + + + + + +Fajardo, et al. Standards Track [Page 134] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 +-----------+ @@ -7749,6 +7528,7 @@ Internet-Draft Diameter Base Protocol January 2011 Destination-Realm | 1 | 0 | Error-Reporting-Host | 0 | 0+ | Event-Timestamp | 0-1 | 0-1 | + Failed-AVP | 0 | 0-1 | Origin-Host | 1 | 1 | Origin-Realm | 1 | 1 | Proxy-Info | 0+ | 0+ | @@ -7760,144 +7540,220 @@ Internet-Draft Diameter Base Protocol January 2011 Vendor-Specific-Application-Id| 0-1 | 0-1 | ------------------------------+-----+-----+ +11. IANA Considerations + This section provides guidance to the Internet Assigned Numbers + Authority (IANA) regarding registration of values related to the + Diameter protocol, in accordance with [RFC5226]. Existing IANA + registries and assignments put in place by RFC 3588 remain the same + unless explicitly updated or deprecated in this section. +11.1. AVP Header + As defined in Section 4, the AVP header contains three fields that + require IANA namespace management: the AVP Code, Vendor-ID, and Flags + fields. - - - - - - - - - - - -Fajardo, et al. Expires July 24, 2011 [Page 139] +Fajardo, et al. Standards Track [Page 135] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 -11. IANA Considerations +11.1.1. AVP Codes - This section provides guidance to the Internet Assigned Numbers - Authority (IANA) regarding registration of values related to the - Diameter protocol, in accordance with BCP 26 [RFC5226]. The policies - and procedures for the IANA put in place by [RFC3588] applies here. - The criteria used by the IANA for assignment of numbers within this - namespace remains the same unless otherwise stated in this section. - Existing assignments remains the same unless explicitly updated or - deprecated in this secion. + There are multiple namespaces. Vendors can have their own AVP Codes + namespace that will be identified by their Vendor-ID (also known as + Enterprise-Number), and they control the assignments of their vendor- + specific AVP Codes within their own namespace. The absence of a + Vendor-ID or a Vendor-ID value of zero (0) identifies the IETF AVP + Codes namespace, which is under IANA control. The AVP Codes and + sometimes possible values in an AVP are controlled and maintained by + IANA. AVP Code 0 is not used. AVP Codes 1-255 are managed + separately as RADIUS Attribute Types. Where a Vendor-Specific AVP is + implemented by more than one vendor, allocation of global AVPs should + be encouraged instead. + + AVPs may be allocated following Expert Review (by a Designated + Expert) with Specification Required [RFC5226]. A block allocation + (release of more than three AVPs at a time for a given purpose) + requires IETF Review [RFC5226]. -11.1. Changes to AVP Header Allocation +11.1.2. AVP Flags - For AVP Headers, the only change is the AVP code block allocations. - Block allocation (release of more than 3 at a time for a given - purpose) now only require IETF Review as opposed to an IETF - Consensus. + Section 4.1 describes the existing AVP Flags. The remaining bits can + only be assigned via a Standards Action [RFC5226]. 11.2. Diameter Header - For the Diameter Header, the command code namespace allocation has +11.2.1. Command Codes + + For the Diameter header, the Command Code namespace allocation has changed. The new allocation rules are as follows: - The command code values 256 - 8,388,607 (0x100 to 0x7fffff) are + The Command Code values 256 - 8,388,607 (0x100 to 0x7fffff) are for permanent, standard commands, allocated by IETF Review [RFC5226]. The values 8,388,608 - 16,777,213 (0x800000 - 0xfffffd) are - reserved for vendor-specific command codes, to be allocated on a + reserved for vendor-specific Command Codes, to be allocated on a First Come, First Served basis by IANA [RFC5226]. The request to IANA for a Vendor-Specific Command Code SHOULD include a reference - to a publicly available specification which documents the command + to a publicly available specification that documents the command in sufficient detail to aid in interoperability between independent implementations. If the specification cannot be made - publicly available, the request for a vendor-specific command code + publicly available, the request for a vendor-specific Command Code MUST include the contact information of persons and/or entities responsible for authoring and maintaining the command. + + + + + +Fajardo, et al. Standards Track [Page 136] + +RFC 6733 Diameter Base Protocol October 2012 + + + The values 16,777,214 and 16,777,215 (hexadecimal values 0xfffffe + - 0xffffff) are reserved for experimental commands. As these + codes are only for experimental and testing purposes, no guarantee + is made for interoperability between Diameter peers using + experimental commands. + +11.2.2. Command Flags + + Section 3 describes the existing Command Flags field. The remaining + bits can only be assigned via a Standards Action [RFC5226]. + 11.3. AVP Values For AVP values, the Experimental-Result-Code AVP value allocation has - been added. The new rule is as follows: + been added; see Section 11.3.1. The old AVP value allocation rule, + IETF Consensus, has been updated to IETF Review as per [RFC5226], and + affected AVPs are listed as reminders. 11.3.1. Experimental-Result-Code AVP Values for this AVP are purely local to the indicated vendor, and no IANA registry is maintained for them. +11.3.2. Result-Code AVP Values + New values are available for assignment via IETF Review [RFC5226]. +11.3.3. Accounting-Record-Type AVP Values -Fajardo, et al. Expires July 24, 2011 [Page 140] - -Internet-Draft Diameter Base Protocol January 2011 + New values are available for assignment via IETF Review [RFC5226]. + +11.3.4. Termination-Cause AVP Values + New values are available for assignment via IETF Review [RFC5226]. -11.4. Diameter TCP, SCTP, TLS/TCP and DTLS/SCTP Port Numbers +11.3.5. Redirect-Host-Usage AVP Values - Updated port number assignments are described in this section. The - IANA has assigned port number 3868 for TCP and SCTP. The port number - [TBD] has been assigned for TLS/TCP and DTLS/SCTP. + New values are available for assignment via IETF Review [RFC5226]. -11.5. S-NAPTR Parameters +11.3.6. Session-Server-Failover AVP Values - This document registers a new S-NAPTR Application Service Tag value - of "aaa". + New values are available for assignment via IETF Review [RFC5226]. - This document also registers the following S-NAPTR Application - Protocol Tags: +11.3.7. Session-Binding AVP Values - Tag | Protocol - -------------------|--------- - diameter.tcp | TCP - diameter.sctp | SCTP - diameter.tls.tcp | TLS/TCP - diameter.dtls.sctp | DTLS/SCTP + New values are available for assignment via IETF Review [RFC5226]. +Fajardo, et al. Standards Track [Page 137] + +RFC 6733 Diameter Base Protocol October 2012 + + +11.3.8. Disconnect-Cause AVP Values + New values are available for assignment via IETF Review [RFC5226]. +11.3.9. Auth-Request-Type AVP Values + New values are available for assignment via IETF Review [RFC5226]. +11.3.10. Auth-Session-State AVP Values + New values are available for assignment via IETF Review [RFC5226]. +11.3.11. Re-Auth-Request-Type AVP Values + New values are available for assignment via IETF Review [RFC5226]. +11.3.12. Accounting-Realtime-Required AVP Values + New values are available for assignment via IETF Review [RFC5226]. +11.3.13. Inband-Security-Id AVP (code 299) + The use of this AVP has been deprecated. +11.4. _diameters Service Name and Port Number Registration + IANA has registered the "_diameters" service name and assigned port + numbers for TLS/TCP and DTLS/SCTP according to the guidelines given + in [RFC6335]. + Service Name: _diameters + Transport Protocols: TCP, SCTP + Assignee: IESG <[email protected]> + Contact: IETF Chair <[email protected]> + Description: Diameter over TLS/TCP and DTLS/SCTP + Reference: RFC 6733 + Port Number: 5868, from the User Range -Fajardo, et al. Expires July 24, 2011 [Page 141] + + +Fajardo, et al. Standards Track [Page 138] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 + + +11.5. SCTP Payload Protocol Identifiers + + Two SCTP payload protocol identifiers have been registered in the + SCTP Payload Protocol Identifiers registry: + + + Value | SCTP Payload Protocol Identifier + -------|----------------------------------- + 46 | Diameter in a SCTP DATA chunk + 47 | Diameter in a DTLS/SCTP DATA chunk + +11.6. S-NAPTR Parameters -12. Diameter protocol related configurable parameters + The following tag has been registered in the S-NAPTR Application + Protocol Tags registry: + + Tag | Protocol + -------------------|--------- + diameter.dtls.sctp | DTLS/SCTP + +12. Diameter Protocol-Related Configurable Parameters This section contains the configurable parameters that are found throughout this document: @@ -7915,8 +7771,8 @@ Internet-Draft Diameter Base Protocol January 2011 A Diameter proxy server routes messages based on the realm portion of a Network Access Identifier (NAI). The server MUST have a table of Realm Names, and the address of the peer to which the - message must be forwarded to. The routing table MAY also include - a "default route", which is typically used for all messages that + message must be forwarded. The routing table MAY also include a + "default route", which is typically used for all messages that cannot be locally processed. Tc timer @@ -7927,30 +7783,9 @@ Internet-Draft Diameter Base Protocol January 2011 - - - - - - - - - - - - - - - - - - - - - -Fajardo, et al. Expires July 24, 2011 [Page 142] +Fajardo, et al. Standards Track [Page 139] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 13. Security Considerations @@ -7959,34 +7794,34 @@ Internet-Draft Diameter Base Protocol January 2011 [RFC5246] or DTLS/SCTP [RFC6083]. Additional security mechanisms such as IPsec [RFC4301] MAY also be deployed to secure connections between peers. However, all Diameter base protocol implementations - MUST support the use of TLS/TCP and DTLS/SCTP and the Diameter - protocol MUST NOT be used without any security mechanism. + MUST support the use of TLS/TCP and DTLS/SCTP, and the Diameter + protocol MUST NOT be used without one of TLS, DTLS, or IPsec. If a Diameter connection is to be protected via TLS/TCP and DTLS/SCTP or IPsec, then TLS/TCP and DTLS/SCTP or IPsec/IKE SHOULD begin prior to any Diameter message exchange. All security parameters for TLS/ TCP and DTLS/SCTP or IPsec are configured independent of the Diameter - protocol. All Diameter message will be sent through the TLS/TCP and + protocol. All Diameter messages will be sent through the TLS/TCP and DTLS/SCTP or IPsec connection after a successful setup. For TLS/TCP and DTLS/SCTP connections to be established in the open state, the CER/CEA exchange MUST include an Inband-Security-ID AVP with a value of TLS/TCP and DTLS/SCTP. The TLS/TCP and DTLS/SCTP - handshake will begin when both ends successfully reached the open + handshake will begin when both ends successfully reach the open state, after completion of the CER/CEA exchange. If the TLS/TCP and DTLS/SCTP handshake is successful, all further messages will be sent - via TLS/TCP and DTLS/SCTP. If the handshake fails, both ends move to - the closed state. See Sections 13.1 for more details. + via TLS/TCP and DTLS/SCTP. If the handshake fails, both ends MUST + move to the closed state. See Section 13.1 for more details. 13.1. TLS/TCP and DTLS/SCTP Usage Diameter nodes using TLS/TCP and DTLS/SCTP for security MUST mutually authenticate as part of TLS/TCP and DTLS/SCTP session establishment. In order to ensure mutual authentication, the Diameter node acting as - TLS/TCP and DTLS/SCTP server MUST request a certificate from the + the TLS/TCP and DTLS/SCTP server MUST request a certificate from the Diameter node acting as TLS/TCP and DTLS/SCTP client, and the - Diameter node acting as TLS/TCP and DTLS/SCTP client MUST be prepared - to supply a certificate on request. + Diameter node acting as the TLS/TCP and DTLS/SCTP client MUST be + prepared to supply a certificate on request. Diameter nodes MUST be able to negotiate the following TLS/TCP and DTLS/SCTP cipher suites: @@ -8000,16 +7835,24 @@ Internet-Draft Diameter Base Protocol January 2011 TLS_RSA_WITH_AES_128_CBC_SHA - Diameter nodes MAY negotiate other TLS/TCP and DTLS/SCTP cipher -Fajardo, et al. Expires July 24, 2011 [Page 143] + +Fajardo, et al. Standards Track [Page 140] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 + + Note that it is quite possible that support for the + TLS_RSA_WITH_AES_128_CBC_SHA cipher suite will be REQUIRED at some + future date. Diameter nodes MAY negotiate other TLS/TCP and DTLS/ + SCTP cipher suites. - suites. + If public key certificates are used for Diameter security (for + example, with TLS), the value of the expiration times in the routing + and peer tables MUST NOT be greater than the expiry time in the + relevant certificates. 13.2. Peer-to-Peer Considerations @@ -8027,67 +7870,105 @@ Internet-Draft Diameter Base Protocol January 2011 peers may not be known beforehand and therefore peer discovery may be required. +13.3. AVP Considerations + Diameter AVPs often contain security-sensitive data; for example, + user passwords and location data, network addresses and cryptographic + keys. The following AVPs defined in this document are considered to + be security-sensitive: + o Acct-Interim-Interval + o Accounting-Realtime-Required + o Acct-Multi-Session-Id + o Accounting-Record-Number + o Accounting-Record-Type + o Accounting-Session-Id + o Accounting-Sub-Session-Id + o Class +Fajardo, et al. Standards Track [Page 141] + +RFC 6733 Diameter Base Protocol October 2012 + o Session-Id + o Session-Binding + o Session-Server-Failover + o User-Name + Diameter messages containing these or any other AVPs considered to be + security-sensitive MUST only be sent protected via mutually + authenticated TLS or IPsec. In addition, those messages MUST NOT be + sent via intermediate nodes unless there is end-to-end security + between the originator and recipient or the originator has locally + trusted configuration that indicates that end-to-end security is not + needed. For example, end-to-end security may not be required in the + case where an intermediary node is known to be operated as part of + the same administrative domain as the endpoints so that an ability to + successfully compromise the intermediary would imply a high + probability of being able to compromise the endpoints as well. Note + that no end-to-end security mechanism is specified in this document. +14. References +14.1. Normative References + [FLOATPOINT] + Institute of Electrical and Electronics Engineers, "IEEE + Standard for Binary Floating-Point Arithmetic, ANSI/IEEE + Standard 754-1985", August 1985. + [IANAADFAM] + IANA, "Address Family Numbers", + <http://www.iana.org/assignments/address-family-numbers>. + [RFC0791] Postel, J., "Internet Protocol", STD 5, RFC 791, + September 1981. + [RFC0793] Postel, J., "Transmission Control Protocol", STD 7, + RFC 793, September 1981. + [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate + Requirement Levels", BCP 14, RFC 2119, March 1997. + [RFC3492] Costello, A., "Punycode: A Bootstring encoding of Unicode + for Internationalized Domain Names in Applications + (IDNA)", RFC 3492, March 2003. - - -Fajardo, et al. Expires July 24, 2011 [Page 144] +Fajardo, et al. Standards Track [Page 142] -Internet-Draft Diameter Base Protocol January 2011 - - -14. References - -14.1. Normative References - - [FLOATPOINT] - Institute of Electrical and Electronics Engineers, "IEEE - Standard for Binary Floating-Point Arithmetic, ANSI/IEEE - Standard 754-1985", August 1985. +RFC 6733 Diameter Base Protocol October 2012 - [IANAADFAM] - IANA,, "Address Family Numbers", - http://www.iana.org/assignments/address-family-numbers. - [RADTYPE] IANA,, "RADIUS Types", - http://www.iana.org/assignments/radius-types. + [RFC3539] Aboba, B. and J. Wood, "Authentication, Authorization and + Accounting (AAA) Transport Profile", RFC 3539, June 2003. - [RFC791] Postel, J., "Internet Protocol", RFC 791, September 1981. + [RFC3629] Yergeau, F., "UTF-8, a transformation format of ISO + 10646", STD 63, RFC 3629, November 2003. - [RFC793] Postel, J., "Transmission Control Protocol", RFC 793, - January 1981. + [RFC3958] Daigle, L. and A. Newton, "Domain-Based Application + Service Location Using SRV RRs and the Dynamic Delegation + Discovery Service (DDDS)", RFC 3958, January 2005. - [RFC3539] Aboba, B. and J. Wood, "Authentication, Authorization and - Accounting (AAA) Transport Profile", RFC 3539, June 2003. + [RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform + Resource Identifier (URI): Generic Syntax", STD 66, + RFC 3986, January 2005. [RFC4004] Calhoun, P., Johansson, T., Perkins, C., Hiller, T., and P. McCann, "Diameter Mobile IPv4 Application", RFC 4004, @@ -8101,51 +7982,44 @@ Internet-Draft Diameter Base Protocol January 2011 Loughney, "Diameter Credit-Control Application", RFC 4006, August 2005. - [RFC5234] Crocker, D. and P. Overell, "Augmented BNF for Syntax - Specifications: ABNF", STD 68, RFC 5234, January 2008. - - [RFC3588] Calhoun, P., Loughney, J., Guttman, E., Zorn, G., and J. - Arkko, "Diameter Base Protocol", RFC 3588, September 2003. + [RFC4086] Eastlake, D., Schiller, J., and S. Crocker, "Randomness + Requirements for Security", BCP 106, RFC 4086, June 2005. - [RFC5226] Narten, T. and H. Alvestrand, "Guidelines for Writing an - IANA Considerations Section in RFCs", BCP 26, RFC 5226, - May 2008. + [RFC4282] Aboba, B., Beadles, M., Arkko, J., and P. Eronen, "The + Network Access Identifier", RFC 4282, December 2005. [RFC4291] Hinden, R. and S. Deering, "IP Version 6 Addressing Architecture", RFC 4291, February 2006. + [RFC4960] Stewart, R., "Stream Control Transmission Protocol", + RFC 4960, September 2007. + [RFC5226] Narten, T. and H. Alvestrand, "Guidelines for Writing an + IANA Considerations Section in RFCs", BCP 26, RFC 5226, + May 2008. -Fajardo, et al. Expires July 24, 2011 [Page 145] - -Internet-Draft Diameter Base Protocol January 2011 - + [RFC5234] Crocker, D. and P. Overell, "Augmented BNF for Syntax + Specifications: ABNF", STD 68, RFC 5234, January 2008. - [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate - Requirement Levels", BCP 14, RFC 2119, March 1997. + [RFC5246] Dierks, T. and E. Rescorla, "The Transport Layer Security + (TLS) Protocol Version 1.2", RFC 5246, August 2008. - [RFC4282] Aboba, B., Beadles, M., Arkko, J., and P. Eronen, "The - Network Access Identifier", RFC 4282, December 2005. - [RFC4086] Eastlake, D., Schiller, J., and S. Crocker, "Randomness - Requirements for Security", BCP 106, RFC 4086, June 2005. - [RFC4960] Stewart, R., "Stream Control Transmission Protocol", - RFC 4960, September 2007. - [RFC3958] Daigle, L. and A. Newton, "Domain-Based Application - Service Location Using SRV RRs and the Dynamic Delegation - Discovery Service (DDDS)", RFC 3958, January 2005. +Fajardo, et al. Standards Track [Page 143] + +RFC 6733 Diameter Base Protocol October 2012 - [RFC5246] Dierks, T. and E. Rescorla, "The Transport Layer Security - (TLS) Protocol Version 1.2", RFC 5246, August 2008. - [RFC3986] Berners-Lee, T., Fielding, R., and L. Masinter, "Uniform - Resource Identifier (URI): Generic Syntax", STD 66, - RFC 3986, January 2005. + [RFC5280] Cooper, D., Santesson, S., Farrell, S., Boeyen, S., + Housley, R., and W. Polk, "Internet X.509 Public Key + Infrastructure Certificate and Certificate Revocation List + (CRL) Profile", RFC 5280, May 2008. - [RFC3629] Yergeau, F., "UTF-8, a transformation format of ISO - 10646", STD 63, RFC 3629, November 2003. + [RFC5729] Korhonen, J., Jones, M., Morand, L., and T. Tsou, + "Clarifications on the Routing of Diameter Requests Based + on the Username and the Realm", RFC 5729, December 2009. [RFC5890] Klensin, J., "Internationalized Domain Names for Applications (IDNA): Definitions and Document Framework", @@ -8154,103 +8028,120 @@ Internet-Draft Diameter Base Protocol January 2011 [RFC5891] Klensin, J., "Internationalized Domain Names in Applications (IDNA): Protocol", RFC 5891, August 2010. - [RFC3492] Costello, A., "Punycode: A Bootstring encoding of Unicode - for Internationalized Domain Names in Applications - (IDNA)", RFC 3492, March 2003. - - [RFC5729] Korhonen, J., Jones, M., Morand, L., and T. Tsou, - "Clarifications on the Routing of Diameter Requests Based - on the Username and the Realm", RFC 5729, December 2009. - - [RFC4347] Rescorla, E. and N. Modadugu, "Datagram Transport Layer - Security", RFC 4347, April 2006. - [RFC6083] Tuexen, M., Seggelmann, R., and E. Rescorla, "Datagram Transport Layer Security (DTLS) for Stream Control Transmission Protocol (SCTP)", RFC 6083, January 2011. + [RFC6347] Rescorla, E. and N. Modadugu, "Datagram Transport Layer + Security Version 1.2", RFC 6347, January 2012. + [RFC6408] Jones, M., Korhonen, J., and L. Morand, "Diameter + Straightforward-Naming Authority Pointer (S-NAPTR) Usage", + RFC 6408, November 2011. +14.2. Informative References -Fajardo, et al. Expires July 24, 2011 [Page 146] - -Internet-Draft Diameter Base Protocol January 2011 + [ENTERPRISE] IANA, "SMI Network Management Private Enterprise + Codes", + <http://www.iana.org/assignments/enterprise-numbers>. + [IANATCV] IANA, "Termination-Cause AVP Values (code 295)", + <http://www.iana.org/assignments/aaa-parameters/ + aaa-parameters.xml#aaa-parameters-16>. -14.2. Informational References + [RFC1492] Finseth, C., "An Access Control Protocol, Sometimes + Called TACACS", RFC 1492, July 1993. - [RFC2989] Aboba, B., Calhoun, P., Glass, S., Hiller, T., McCann, P., - Shiino, H., Walsh, P., Zorn, G., Dommety, G., Perkins, C., - Patil, B., Mitton, D., Manning, S., Beadles, M., Chen, X., - Sivalingham, S., Hameed, A., Munson, M., Jacobs, S., Lim, - B., Hirschman, B., Hsu, R., Koo, H., Lipford, M., - Campbell, E., Xu, Y., Baba, S., and E. Jaques, "Criteria - for Evaluating AAA Protocols for Network Access", - RFC 2989, November 2000. + [RFC1661] Simpson, W., "The Point-to-Point Protocol (PPP)", + STD 51, RFC 1661, July 1994. - [RFC2975] Aboba, B., Arkko, J., and D. Harrington, "Introduction to - Accounting Management", RFC 2975, October 2000. + [RFC2104] Krawczyk, H., Bellare, M., and R. Canetti, "HMAC: + Keyed-Hashing for Message Authentication", RFC 2104, + February 1997. - [RFC3232] Reynolds, J., "Assigned Numbers: RFC 1700 is Replaced by - an On-line Database", RFC 3232, January 2002. - [RFC5176] Chiba, M., Dommety, G., Eklund, M., Mitton, D., and B. - Aboba, "Dynamic Authorization Extensions to Remote - Authentication Dial In User Service (RADIUS)", RFC 5176, - January 2008. - [RFC1661] Simpson, W., "The Point-to-Point Protocol (PPP)", STD 51, - RFC 1661, July 1994. - [RFC2866] Rigney, C., "RADIUS Accounting", RFC 2866, June 2000. - [RFC2869] Rigney, C., Willats, W., and P. Calhoun, "RADIUS - Extensions", RFC 2869, June 2000. +Fajardo, et al. Standards Track [Page 144] + +RFC 6733 Diameter Base Protocol October 2012 - [RFC2865] Rigney, C., Willens, S., Rubens, A., and W. Simpson, - "Remote Authentication Dial In User Service (RADIUS)", - RFC 2865, June 2000. - [RFC3162] Aboba, B., Zorn, G., and D. Mitton, "RADIUS and IPv6", - RFC 3162, August 2001. + [RFC2782] Gulbrandsen, A., Vixie, P., and L. Esibov, "A DNS RR + for specifying the location of services (DNS SRV)", + RFC 2782, February 2000. - [RFC4301] Kent, S. and K. Seo, "Security Architecture for the - Internet Protocol", RFC 4301, December 2005. + [RFC2865] Rigney, C., Willens, S., Rubens, A., and W. Simpson, + "Remote Authentication Dial In User Service (RADIUS)", + RFC 2865, June 2000. - [RFC5905] Mills, D., Martin, J., Burbank, J., and W. Kasch, "Network - Time Protocol Version 4: Protocol and Algorithms - Specification", RFC 5905, June 2010. + [RFC2866] Rigney, C., "RADIUS Accounting", RFC 2866, June 2000. - [RFC1492] Finseth, C., "An Access Control Protocol, Sometimes Called - TACACS", RFC 1492, July 1993. + [RFC2869] Rigney, C., Willats, W., and P. Calhoun, "RADIUS + Extensions", RFC 2869, June 2000. - [RFC4690] Klensin, J., Faltstrom, P., Karp, C., and IAB, "Review and + [RFC2881] Mitton, D. and M. Beadles, "Network Access Server + Requirements Next Generation (NASREQNG) NAS Model", + RFC 2881, July 2000. + [RFC2975] Aboba, B., Arkko, J., and D. Harrington, "Introduction + to Accounting Management", RFC 2975, October 2000. + [RFC2989] Aboba, B., Calhoun, P., Glass, S., Hiller, T., McCann, + P., Shiino, H., Walsh, P., Zorn, G., Dommety, G., + Perkins, C., Patil, B., Mitton, D., Manning, S., + Beadles, M., Chen, X., Sivalingham, S., Hameed, A., + Munson, M., Jacobs, S., Lim, B., Hirschman, B., Hsu, + R., Koo, H., Lipford, M., Campbell, E., Xu, Y., Baba, + S., and E. Jaques, "Criteria for Evaluating AAA + Protocols for Network Access", RFC 2989, November 2000. -Fajardo, et al. Expires July 24, 2011 [Page 147] - -Internet-Draft Diameter Base Protocol January 2011 + [RFC3162] Aboba, B., Zorn, G., and D. Mitton, "RADIUS and IPv6", + RFC 3162, August 2001. + [RFC3748] Aboba, B., Blunk, L., Vollbrecht, J., Carlson, J., and + H. Levkowetz, "Extensible Authentication Protocol + (EAP)", RFC 3748, June 2004. - Recommendations for Internationalized Domain Names - (IDNs)", RFC 4690, September 2006. + [RFC4301] Kent, S. and K. Seo, "Security Architecture for the + Internet Protocol", RFC 4301, December 2005. - [RFC5461] Gont, F., "TCP's Reaction to Soft Errors", RFC 5461, - February 2009. + [RFC4690] Klensin, J., Faltstrom, P., Karp, C., and IAB, "Review + and Recommendations for Internationalized Domain Names + (IDNs)", RFC 4690, September 2006. - [RFC5927] Gont, F., "ICMP Attacks against TCP", RFC 5927, July 2010. + [RFC5176] Chiba, M., Dommety, G., Eklund, M., Mitton, D., and B. + Aboba, "Dynamic Authorization Extensions to Remote + Authentication Dial In User Service (RADIUS)", + RFC 5176, January 2008. - [RFC3692] Narten, T., "Assigning Experimental and Testing Numbers - Considered Useful", BCP 82, RFC 3692, January 2004. +Fajardo, et al. Standards Track [Page 145] + +RFC 6733 Diameter Base Protocol October 2012 + + [RFC5461] Gont, F., "TCP's Reaction to Soft Errors", RFC 5461, + February 2009. + [RFC5905] Mills, D., Martin, J., Burbank, J., and W. Kasch, + "Network Time Protocol Version 4: Protocol and + Algorithms Specification", RFC 5905, June 2010. + [RFC5927] Gont, F., "ICMP Attacks against TCP", RFC 5927, + July 2010. + [RFC6335] Cotton, M., Eggert, L., Touch, J., Westerlund, M., and + S. Cheshire, "Internet Assigned Numbers Authority + (IANA) Procedures for the Management of the Service + Name and Transport Protocol Port Number Registry", + BCP 165, RFC 6335, August 2011. + [RFC6737] Kang, J. and G. Zorn, "The Diameter Capabilities Update + Application", RFC 6737, October 2012. @@ -8284,80 +8175,83 @@ Internet-Draft Diameter Base Protocol January 2011 -Fajardo, et al. Expires July 24, 2011 [Page 148] +Fajardo, et al. Standards Track [Page 146] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 Appendix A. Acknowledgements -A.1. RFC3588bis +A.1. This Document The authors would like to thank the following people that have provided proposals and contributions to this document: To Vishnu Ram and Satendra Gera for their contributions on - Capabilities Updates, Predictive Loop Avoidance as well as many other - technical proposals. To Tolga Asveren for his insights and + capabilities updates, predictive loop avoidance, as well as many + other technical proposals. To Tolga Asveren for his insights and contributions on almost all of the proposed solutions incorporated - into this document. To Timothy Smith for helping on the Capabilities - Updates and other topics. To Tony Zhang for providing fixes to loop - holes on composing Failed-AVPs as well as many other issues and + into this document. To Timothy Smith for helping on the capabilities + Update and other topics. To Tony Zhang for providing fixes to + loopholes on composing Failed-AVPs as well as many other issues and topics. To Jan Nordqvist for clearly stating the usage of - Application Ids. To Anders Kristensen for providing needed technical + Application Ids. To Anders Kristensen for providing needed technical opinions. To David Frascone for providing invaluable review of the document. To Mark Jones for providing clarifying text on vendor - command codes and other vendor specific indicators. + command codes and other vendor-specific indicators. To Victor + Pascual and Sebastien Decugis for new text and recommendations on + SCTP/DTLS. To Jouni Korhonen for taking over the editing task and + resolving last bits from versions 27 through 29. - Special thanks to the Diameter extensibility design team which helped - resolve the tricky question of mandatory AVPs and ABNF semantics. - The members of this team are as follows: + Special thanks to the Diameter extensibility design team, which + helped resolve the tricky question of mandatory AVPs and ABNF + semantics. The members of this team are as follows: Avi Lior, Jari Arkko, Glen Zorn, Lionel Morand, Mark Jones, Tolga - Asveren Jouni Korhonen, Glenn McGregor. + Asveren, Jouni Korhonen, and Glenn McGregor. Special thanks also to people who have provided invaluable comments and inputs especially in resolving controversial issues: - Glen Zorn, Yoshihiro Ohba, Marco Stura, and Pasi Eronen. + Glen Zorn, Yoshihiro Ohba, Marco Stura, Stephen Farrel, Pete Resnick, + Peter Saint-Andre, Robert Sparks, Krishna Prasad, Sean Turner, Barry + Leiba, and Pasi Eronen. Finally, we would like to thank the original authors of this document: - Pat Calhoun, John Loughney, Jari Arkko, Erik Guttman and Glen Zorn. + Pat Calhoun, John Loughney, Jari Arkko, Erik Guttman, and Glen Zorn. Their invaluable knowledge and experience has given us a robust and flexible AAA protocol that many people have seen great value in adopting. We greatly appreciate their support and stewardship for the continued improvements of Diameter as a protocol. We would also like to extend our gratitude to folks aside from the authors who have - assisted and contributed to the original version of this document. - Their efforts significantly contributed to the success of Diameter. - - - -Fajardo, et al. Expires July 24, 2011 [Page 149] +Fajardo, et al. Standards Track [Page 147] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 -A.2. RFC3588 + assisted and contributed to the original version of this document. + Their efforts significantly contributed to the success of Diameter. + +A.2. RFC 3588 The authors would like to thank Nenad Trifunovic, Tony Johansson and Pankaj Patel for their participation in the pre-IETF Document Reading - Party. Allison Mankin, Jonathan Wood and Bernard Aboba provided - invaluable assistance in working out transport issues, and similarly - with Steven Bellovin in the security area. + Party. Allison Mankin, Jonathan Wood, and Bernard Aboba provided + invaluable assistance in working out transport issues and this was + also the case with Steven Bellovin in the security area. Paul Funk and David Mitton were instrumental in getting the Peer State Machine correct, and our deep thanks go to them for their time. Text in this document was also provided by Paul Funk, Mark Eklund, - Mark Jones and Dave Spence. Jacques Caron provided many great + Mark Jones, and Dave Spence. Jacques Caron provided many great comments as a result of a thorough review of the spec. The authors would also like to acknowledge the following people for @@ -8367,96 +8261,57 @@ A.2. RFC3588 David Frascone, Daniel C. Fox, Lol Grant, Ignacio Goyret, Nancy Greene, Peter Heitman, Fredrik Johansson, Mark Jones, Martin Julien, Bob Kopacz, Paul Krumviede, Fergal Ladley, Ryan Moats, Victor Muslin, - Kenneth Peirce, John Schnizlein, Sumit Vakil, John R. Vollbrecht and + Kenneth Peirce, John Schnizlein, Sumit Vakil, John R. Vollbrecht, and Jeff Weisberg. Finally, Pat Calhoun would like to thank Sun Microsystems since most of the effort put into this document was done while he was in their employ. - - - - - - - - - - - - - - - - - - - - - - -Fajardo, et al. Expires July 24, 2011 [Page 150] - -Internet-Draft Diameter Base Protocol January 2011 - - Appendix B. S-NAPTR Example As an example, consider a client that wishes to resolve aaa: - example1.com. The client performs a NAPTR query for that domain, and - the following NAPTR records are returned: + ex1.example.com. The client performs a NAPTR query for that domain, + and the following NAPTR records are returned: ;; order pref flags service regexp replacement IN NAPTR 50 50 "s" "aaa:diameter.tls.tcp" "" - _diameter._tls.example1.com + _diameter._tls.ex1.example.com IN NAPTR 100 50 "s" "aaa:diameter.tcp" "" - _aaa._tcp.example1.com + _aaa._tcp.ex1.example.com IN NAPTR 150 50 "s" "aaa:diameter.sctp" "" - _diameter._sctp.example1.com + _diameter._sctp.ex1.example.com - This indicates that the server supports TLS, TCP and SCTP in that + This indicates that the server supports TLS, TCP, and SCTP in that order. If the client supports TLS, TLS will be used, targeted to a - host determined by an SRV lookup of _diameter._tls.example1.com. + + + +Fajardo, et al. Standards Track [Page 148] + +RFC 6733 Diameter Base Protocol October 2012 + + + host determined by an SRV lookup of _diameter._tls.ex1.example.com. That lookup would return: ;; Priority Weight Port Target - IN SRV 0 1 5060 server1.example1.com - IN SRV 0 2 5060 server2.example1.com + IN SRV 0 1 5060 server1.ex1.example.com + IN SRV 0 2 5060 server2.ex1.example.com As an alternative example, a client that wishes to resolve aaa: - example2.com. The client performs a NAPTR query for that domain, and - the following NAPTR records are returned: + ex2.example.com. The client performs a NAPTR query for that domain, + and the following NAPTR records are returned: ;; order pref flags service regexp replacement IN NAPTR 150 50 "a" "aaa:diameter.tls.tcp" "" - server1.example2.com + server1.ex2.example.com IN NAPTR 150 50 "a" "aaa:diameter.tls.tcp" "" - server2.example2.com + server2.ex2.example.com This indicates that the server supports TCP available at the returned host names. - - - - - - - - - - - - - - - -Fajardo, et al. Expires July 24, 2011 [Page 151] - -Internet-Draft Diameter Base Protocol January 2011 - - Appendix C. Duplicate Detection As described in Section 9.4, accounting record duplicate detection is @@ -8464,14 +8319,14 @@ Appendix C. Duplicate Detection reasons: o Failover to an alternate server. Where close to real-time - performance is required, failover thresholds need to be kept low - and this may lead to an increased likelihood of duplicates. - Failover can occur at the client or within Diameter agents. - - o Failure of a client or agent after sending of a record from non- - volatile memory, but prior to receipt of an application layer ACK - and deletion of the record. record to be sent. This will result - in retransmission of the record soon after the client or agent has + performance is required, failover thresholds need to be kept low. + This may lead to an increased likelihood of duplicates. Failover + can occur at the client or within Diameter agents. + + o Failure of a client or agent after sending a record from non- + volatile memory, but prior to receipt of an application-layer ACK + and deletion of the record to be sent. This will result in + retransmission of the record soon after the client or agent has rebooted. o Duplicates received from RADIUS gateways. Since the @@ -8481,48 +8336,48 @@ Appendix C. Duplicate Detection o Implementation problems and misconfiguration. - The T flag is used as an indication of an application layer + The T flag is used as an indication of an application-layer retransmission event, e.g., due to failover to an alternate server. It is defined only for request messages sent by Diameter clients or agents. For instance, after a reboot, a client may not know whether + + + +Fajardo, et al. Standards Track [Page 149] + +RFC 6733 Diameter Base Protocol October 2012 + + it has already tried to send the accounting records in its non- volatile memory before the reboot occurred. Diameter servers MAY use the T flag as an aid when processing requests and detecting duplicate messages. However, servers that do this MUST ensure that duplicates are found even when the first transmitted request arrives at the server after the retransmitted request. It can be used only in cases - where no answer has been received from the Server for a request and + where no answer has been received from the server for a request and the request is sent again, (e.g., due to a failover to an alternate peer, due to a recovered primary peer or due to a client re-sending a stored record from non-volatile memory such as after reboot of a client or agent). - In some cases the Diameter accounting server can delay the duplicate + In some cases, the Diameter accounting server can delay the duplicate detection and accounting record processing until a post-processing phase takes place. At that time records are likely to be sorted according to the included User-Name and duplicate elimination is easy - in this case. In other situations it may be necessary to perform + in this case. In other situations, it may be necessary to perform real-time duplicate detection, such as when credit limits are imposed or real-time fraud detection is desired. - - - -Fajardo, et al. Expires July 24, 2011 [Page 152] - -Internet-Draft Diameter Base Protocol January 2011 - - In general, only generation of duplicates due to failover or re- sending of records in non-volatile storage can be reliably detected - by Diameter clients or agents. In such cases the Diameter client or - agents can mark the message as possible duplicate by setting the T + by Diameter clients or agents. In such cases, the Diameter client or + agents can mark the message as a possible duplicate by setting the T flag. Since the Diameter server is responsible for duplicate - detection, it can choose to make use of the T flag or not, in order - to optimize duplicate detection. Since the T flag does not affect - interoperability, and may not be needed by some servers, generation - of the T flag is REQUIRED for Diameter clients and agents, but MAY be - implemented by Diameter servers. + detection, it can choose whether or not to make use of the T flag, in + order to optimize duplicate detection. Since the T flag does not + affect interoperability, and it may not be needed by some servers, + generation of the T flag is REQUIRED for Diameter clients and agents, + but it MAY be implemented by Diameter servers. As an example, it can be usually be assumed that duplicates appear within a time window of longest recorded network partition or device @@ -8535,40 +8390,39 @@ Internet-Draft Diameter Base Protocol January 2011 The following is an example of how the T flag may be used by the server to detect duplicate requests. - A Diameter server MAY check the T flag of the received message to determine if the record is a possible duplicate. If the T flag is set in the request message, the server searches for a duplicate within a configurable duplication time window backward and forward. This limits database searching to those records where - the T flag is set. In a well run network, network partitions and + the T flag is set. In a well-run network, network partitions and + + + +Fajardo, et al. Standards Track [Page 150] + +RFC 6733 Diameter Base Protocol October 2012 + + device faults will presumably be rare events, so this approach represents a substantial optimization of the duplicate detection process. During failover, it is possible for the original record - to be received after the T flag marked record, due to differences + to be received after the T-flag-marked record, due to differences in network delays experienced along the path by the original and duplicate transmissions. The likelihood of this occurring increases as the failover interval is decreased. In order to be - able to detect out of order duplicates, the Diameter server should - use backward and forward time windows when performing duplicate - checking for the T flag marked request. For example, in order to - allow time for the original record to exit the network and be - recorded by the accounting server, the Diameter server can delay - processing records with the T flag set until a time period - TIME_WAIT + RECORD_PROCESSING_TIME has elapsed after the closing - of the original transport connection. After this time period has - expired, then it may check the T flag marked records against the + able to detect duplicates that are out of order, the Diameter + server should use backward and forward time windows when + performing duplicate checking for the T-flag-marked request. For + example, in order to allow time for the original record to exit + the network and be recorded by the accounting server, the Diameter + server can delay processing records with the T flag set until a + time period TIME_WAIT + RECORD_PROCESSING_TIME has elapsed after + the closing of the original transport connection. After this time + period, it may check the T-flag-marked records against the database with relative assurance that the original records, if sent, have been received and recorded. - - - -Fajardo, et al. Expires July 24, 2011 [Page 153] - -Internet-Draft Diameter Base Protocol January 2011 - - Appendix D. Internationalized Domain Names To be compatible with the existing DNS infrastructure and simplify @@ -8579,14 +8433,7 @@ Appendix D. Internationalized Domain Names recommendations in [RFC4690] and [RFC5890]. Applications that provide support for IDNs outside of the Diameter protocol but interacting with it SHOULD use the representation and conversion - framework described in [RFC5890], [RFC5891] and [RFC3492]. - - - - - - - + framework described in [RFC5890], [RFC5891], and [RFC3492]. @@ -8608,21 +8455,9 @@ Appendix D. Internationalized Domain Names - - - - - - - - - - - - -Fajardo, et al. Expires July 24, 2011 [Page 154] +Fajardo, et al. Standards Track [Page 151] -Internet-Draft Diameter Base Protocol January 2011 +RFC 6733 Diameter Base Protocol October 2012 Authors' Addresses @@ -8634,7 +8469,7 @@ Authors' Addresses USA Phone: +1-908-421-1845 - Email: [email protected] + EMail: [email protected] Jari Arkko @@ -8643,7 +8478,7 @@ Authors' Addresses Finland Phone: +358 40 5079256 - Email: [email protected] + EMail: [email protected] John Loughney @@ -8653,17 +8488,17 @@ Authors' Addresses US Phone: +1-650-283-8068 - Email: [email protected] + EMail: [email protected] - Glenn Zorn + Glen Zorn (editor) Network Zen - 1310 East Thomas Street - Seattle, WA 98102 - US + 227/358 Thanon Sanphawut + Bang Na, Bangkok 10260 + Thailand - Phone: - Email: [email protected] + Phone: +66 (0) 87-0404617 + EMail: [email protected] @@ -8676,6 +8511,5 @@ Authors' Addresses -Fajardo, et al. Expires July 24, 2011 [Page 155] +Fajardo, et al. Standards Track [Page 152] - diff --git a/lib/diameter/doc/standard/rfc6737.txt b/lib/diameter/doc/standard/rfc6737.txt new file mode 100644 index 0000000000..50aa33e98f --- /dev/null +++ b/lib/diameter/doc/standard/rfc6737.txt @@ -0,0 +1,339 @@ + + + + + + +Internet Engineering Task Force (IETF) K. Jiao +Request for Comments: 6737 Huawei +Category: Standards Track G. Zorn +ISSN: 2070-1721 Network Zen + October 2012 + + + The Diameter Capabilities Update Application + +Abstract + + This document defines a new Diameter application and associated + Command Codes. The Capabilities Update application is intended to + allow the dynamic update of certain Diameter peer capabilities while + the peer-to-peer connection is in the open state. + +Status of This Memo + + This is an Internet Standards Track document. + + This document is a product of the Internet Engineering Task Force + (IETF). It represents the consensus of the IETF community. It has + received public review and has been approved for publication by the + Internet Engineering Steering Group (IESG). Further information on + Internet Standards is available in Section 2 of RFC 5741. + + Information about the current status of this document, any errata, + and how to provide feedback on it may be obtained at + http://www.rfc-editor.org/info/rfc6737. + +Copyright Notice + + Copyright (c) 2012 IETF Trust and the persons identified as the + document authors. All rights reserved. + + This document is subject to BCP 78 and the IETF Trust's Legal + Provisions Relating to IETF Documents + (http://trustee.ietf.org/license-info) in effect on the date of + publication of this document. Please review these documents + carefully, as they describe your rights and restrictions with respect + to this document. Code Components extracted from this document must + include Simplified BSD License text as described in Section 4.e of + the Trust Legal Provisions and are provided without warranty as + described in the Simplified BSD License. + + + + + + + +Jiao & Zorn Standards Track [Page 1] + +RFC 6737 Diameter Capabilities Update October 2012 + + +Table of Contents + + 1. Introduction . . . . . . . . . . . . . . . . . . . . . . . . . 2 + 2. Specification of Requirements . . . . . . . . . . . . . . . . . 2 + 3. Diameter Protocol Considerations . . . . . . . . . . . . . . . 3 + 4. Capabilities Update . . . . . . . . . . . . . . . . . . . . . . 3 + 4.1. Command Code Values . . . . . . . . . . . . . . . . . . . . 4 + 4.1.1. Capabilities-Update-Request . . . . . . . . . . . . . . 4 + 4.1.2. Capabilities-Update-Answer . . . . . . . . . . . . . . 5 + 5. Security Considerations . . . . . . . . . . . . . . . . . . . . 5 + 6. IANA Considerations . . . . . . . . . . . . . . . . . . . . . . 5 + 6.1. Application Identifier . . . . . . . . . . . . . . . . . . 5 + 6.2. Command Codes . . . . . . . . . . . . . . . . . . . . . . . 5 + 7. Contributors . . . . . . . . . . . . . . . . . . . . . . . . . 5 + 8. Acknowledgements . . . . . . . . . . . . . . . . . . . . . . . 5 + 9. References . . . . . . . . . . . . . . . . . . . . . . . . . . 6 + 9.1. Normative References . . . . . . . . . . . . . . . . . . . 6 + 9.2. Informative References . . . . . . . . . . . . . . . . . . 6 + +1. Introduction + + Capabilities exchange is an important component of the Diameter base + protocol [RFC6733], allowing peers to exchange identities and + Diameter capabilities (protocol version number, supported Diameter + applications, security mechanisms, etc.). As defined in RFC 3588, + however, the capabilities exchange process takes place only once, at + the inception of a transport connection between a given pair of + peers. Therefore, if a peer's capabilities change (due to a software + update, for example), the existing connection(s) must be torn down + (along with all of the associated user sessions) and restarted before + the modified capabilities can be advertised. + + This document defines a new Diameter application intended to allow + the dynamic update of a subset of Diameter peer capabilities over an + existing connection. Because the Capabilities Update application + specified herein operates over an existing transport connection, + modification of certain capabilities is prohibited. Specifically, + modifying the security mechanism in use is not allowed; if the + security method used between a pair of peers is changed, the affected + connection MUST be restarted. + +2. Specification of Requirements + + The key words "MUST", "MUST NOT", "REQUIRED", "SHALL", "SHALL NOT", + "SHOULD", "SHOULD NOT", "RECOMMENDED", "MAY", and "OPTIONAL" in this + document are to be interpreted as described in RFC 2119 [RFC2119]. + + + + + +Jiao & Zorn Standards Track [Page 2] + +RFC 6737 Diameter Capabilities Update October 2012 + + +3. Diameter Protocol Considerations + + This section details the relationship of the Diameter Capabilities + Update application to the Diameter base protocol. + + This document specifies Diameter Application-Id 10. Diameter nodes + conforming to this specification MUST advertise support by including + the value 10 in the Auth-Application-Id of the Capabilities-Exchange- + Request (CER) and Capabilities-Exchange-Answer (CEA) commands + [RFC6733]. + +4. Capabilities Update + + When the capabilities of a Diameter node conforming to this + specification change, the node MUST notify all of the nodes with + which it has an open transport connection and which have also + advertised support for the Capabilities Update application using the + Capabilities-Update-Request (CUR) message (Section 4.1.1). This + message allows the update of a peer's capabilities (supported + Diameter applications, etc.). + + A Diameter node only issues a given command to those peers that have + advertised support for the Diameter application that defines the + command; a Diameter node must cache the supported applications in + order to ensure that unrecognized commands and/or Attribute-Value + Pairs (AVPs) are not unnecessarily sent to a peer. + + The receiver of the CUR MUST determine common applications by + computing the intersection of its own set of supported Application + Ids against all of the Application-Id AVPs (Auth-Application-Id, + Acct-Application-Id, and Vendor-Specific-Application-Id) present in + the CUR. The value of the Vendor-Id AVP in the Vendor-Specific- + Application-Id MUST NOT be used during computation. + + If the receiver of a CUR does not have any applications in common + with the sender, then it MUST return a Capabilities-Update-Answer + (CUA) (Section 4.1.2) with the Result-Code AVP set to + DIAMETER_NO_COMMON_APPLICATION [RFC6733], and it SHOULD disconnect + the transport-layer connection. However, if active sessions are + using the connection, peers MAY delay disconnection until the + sessions can be redirected or gracefully terminated. Note that + receiving a CUA from a peer advertising itself as a relay (see + [RFC6733], Section 2.4) MUST be interpreted as having common + applications with the peer. + + As for CER/CEA messages, the CUR and CUA messages MUST NOT be + proxied, redirected, or relayed. + + + + +Jiao & Zorn Standards Track [Page 3] + +RFC 6737 Diameter Capabilities Update October 2012 + + + Even though the CUR/CUA messages cannot be proxied, it is still + possible for an upstream agent to receive a message for which there + are no peers available to handle the application that corresponds to + the Command Code. This could happen if, for example, the peers are + too busy or down. In such instances, the 'E' bit MUST be set in the + answer message with the Result-Code AVP set to + DIAMETER_UNABLE_TO_DELIVER to inform the downstream peer to take + action (e.g., re-routing requests to an alternate peer). + +4.1. Command Code Values + + This section defines Command Code [RFC6733] values that MUST be + supported by all Diameter implementations conforming to this + specification. The following Command Codes are defined in this + document: Capabilities-Update-Request (CUR, Section 4.1.1), and + Capabilities-Update-Answer (CUA, Section 4.1.2). The Diameter + Command Code Format (CCF) ([RFC6733], Section 3.2) is used in the + definitions. + +4.1.1. Capabilities-Update-Request + + The Capabilities-Update-Request (CUR), indicated by the Command Code + set to 328 and the Command Flags' 'R' bit set, is sent to update + local capabilities. Upon detection of a transport failure, this + message MUST NOT be sent to an alternate peer. + + When Diameter is run over the Stream Control Transmission Protocol + (SCTP) [RFC4960], which allows connections to span multiple + interfaces and multiple IP addresses, the Capabilities-Update-Request + message MUST contain one Host-IP-Address AVP for each potential IP + address that may be locally used when transmitting Diameter messages. + + Message Format + + <CUR> ::= < Diameter Header: 328, REQ > + { Origin-Host } + { Origin-Realm } + 1* { Host-IP-Address } + { Vendor-Id } + { Product-Name } + [ Origin-State-Id ] + * [ Supported-Vendor-Id ] + * [ Auth-Application-Id ] + * [ Acct-Application-Id ] + * [ Vendor-Specific-Application-Id ] + [ Firmware-Revision ] + * [ AVP ] + + + + +Jiao & Zorn Standards Track [Page 4] + +RFC 6737 Diameter Capabilities Update October 2012 + + +4.1.2. Capabilities-Update-Answer + + The Capabilities-Update-Answer, indicated by the Command Code set to + 328 and the Command Flags' 'R' bit cleared, is sent in response to a + CUR message. + + Message Format + + <CUA> ::= < Diameter Header: 328 > + { Origin-Host } + { Origin-Realm } + { Result-Code } + [ Error-Message ] + * [ AVP ] + +5. Security Considerations + + The security considerations applicable to the Diameter base protocol + [RFC6733] are also applicable to this document. + +6. IANA Considerations + + This section explains the criteria to be used by the IANA for + assignment of numbers within namespaces used within this document. + +6.1. Application Identifier + + This specification assigns the value 10 (Diameter Capabilities + Update) from the Application Identifiers namespace [RFC6733]. See + Section 3 for the assignment of the namespace in this specification. + +6.2. Command Codes + + This specification assigns the value 328 (Capabilities-Update- + Request/Capabilities-Update-Answer (CUR/CUA)) from the Command Codes + namespace [RFC6733]. See Section 4.1 for the assignment of the + namespace in this specification. + +7. Contributors + + This document is based upon work done by Tina Tsou. + +8. Acknowledgements + + Thanks to Sebastien Decugis, Niklas Neumann, Subash Comerica, Lionel + Morand, Dan Romascanu, Dan Harkins, and Ravi for helpful review and + discussion. + + + + +Jiao & Zorn Standards Track [Page 5] + +RFC 6737 Diameter Capabilities Update October 2012 + + +9. References + +9.1. Normative References + + [RFC2119] Bradner, S., "Key words for use in RFCs to Indicate + Requirement Levels", BCP 14, RFC 2119, March 1997. + + [RFC6733] Fajardo, V., Arkko, J., Loughney, J., and G. Zorn, + "Diameter Base Protocol", RFC 6733, October 2012. + +9.2. Informative References + + [RFC4960] Stewart, R., "Stream Control Transmission Protocol", + RFC 4960, September 2007. + +Authors' Addresses + + Jiao Kang + Huawei Technologies + Section F1, Huawei Industrial Base + Bantian, Longgang District + Shenzhen 518129 + P.R. China + + EMail: [email protected] + + + Glen Zorn + Network Zen + 227/358 Thanon Sanphawut + Bang Na, Bangkok 10260 + Thailand + + Phone: +66 (0) 909-201060 + EMail: [email protected] + + + + + + + + + + + + + + + + +Jiao & Zorn Standards Track [Page 6] + diff --git a/lib/diameter/make/release_targets.mk b/lib/diameter/make/release_targets.mk deleted file mode 100644 index 5a3b585cbc..0000000000 --- a/lib/diameter/make/release_targets.mk +++ /dev/null @@ -1,92 +0,0 @@ -# -# %CopyrightBegin% -# -# Copyright Ericsson AB 1997-2011. All Rights Reserved. -# -# The contents of this file are subject to the Erlang Public License, -# Version 1.1, (the "License"); you may not use this file except in -# compliance with the License. You should have received a copy of the -# Erlang Public License along with this software. If not, it can be -# retrieved online at http://www.erlang.org/. -# -# Software distributed under the License is distributed on an "AS IS" -# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See -# the License for the specific language governing rights and limitations -# under the License. -# -# %CopyrightEnd% -# - -ifeq ($(TOPDOC),) -$(HTMLDIR)/index.html: $(XML_FILES) - date=`date +"%B %e %Y"`; \ - $(XSLTPROC) --noout --stringparam outdir $(HTMLDIR) --stringparam docgen "$(DOCGEN)" --stringparam topdocdir "$(TOPDOCDIR)" \ - --stringparam pdfdir "$(PDFDIR)" \ - --stringparam gendate "$$date" --stringparam appname "$(APPLICATION)" --stringparam appver "$(VSN)" --xinclude \ - -path $(DOCGEN)/priv/docbuilder_dtd -path $(DOCGEN)/priv/dtd_html_entities $(DOCGEN)/priv/xsl/db_html.xsl book.xml -endif - -$(HTMLDIR)/users_guide.html: $(XML_FILES) - date=`date +"%B %e %Y"`; \ - $(XSLTPROC) --noout --stringparam outdir $(HTMLDIR) --stringparam docgen "$(DOCGEN)" --stringparam topdocdir "$(TOPDOCDIR)" \ - --stringparam pdfdir "$(PDFDIR)" \ - --stringparam gendate "$$date" --stringparam appname "$(APPLICATION)" --stringparam appver "$(VSN)" --xinclude \ - -path $(DOCGEN)/priv/docbuilder_dtd -path $(DOCGEN)/priv/dtd_html_entities $(DOCGEN)/priv/xsl/db_html.xsl book.xml - - -%.fo: $(XML_FILES) - date=`date +"%B %e %Y"`; \ - $(XSLTPROC) --stringparam docgen "$(DOCGEN)" --stringparam gendate "$$date" --stringparam appname "$(APPLICATION)" \ - --stringparam appver "$(VSN)" --xinclude \ - -path $(DOCGEN)/priv/docbuilder_dtd -path $(DOCGEN)/priv/dtd_html_entities $(DOCGEN)/priv/xsl/db_pdf.xsl book.xml > $@ - - - -# ------------------------------------------------------------------------ -# The following targets just exist in the documentation directory -# ------------------------------------------------------------------------ -ifneq ($(XML_FILES),) - -# ---------------------------------------------------- -# Generation of application index data -# ---------------------------------------------------- -$(HTMLDIR)/$(APPLICATION).eix: $(XML_FILES) - date=`date +"%B %e %Y"`; \ - $(XSLTPROC) --stringparam docgen "$(DOCGEN)" \ - --stringparam gendate "$$date" --stringparam appname "$(APPLICATION)" --stringparam appver "$(VSN)" --xinclude \ - -path $(DOCGEN)/priv/docbuilder_dtd -path $(DOCGEN)/priv/dtd_html_entities $(DOCGEN)/priv/xsl/db_eix.xsl book.xml > $@ - -docs: -#docs: $(HTMLDIR)/$(APPLICATION).eix - -# ---------------------------------------------------- -# Local documentation target for testing -# ---------------------------------------------------- -local_docs: TOPDOCDIR=. -local_docs: local_copy_of_topdefs docs - -local_html: TOPDOCDIR=. -local_html: local_copy_of_topdefs html - -local_copy_of_topdefs: - $(INSTALL) $(DOCGEN)/priv/css/otp_doc.css $(HTMLDIR) - $(INSTALL) $(DOCGEN)/priv/images/erlang-logo.png $(HTMLDIR) - $(INSTALL) $(DOCGEN)/priv/images/erlang-logo.gif $(HTMLDIR) - $(INSTALL_DIR) $(HTMLDIR)/js/flipmenu - $(INSTALL) $(DOCGEN)/priv/js/flipmenu/flip_closed.gif \ - $(DOCGEN)/priv/js/flipmenu/flip_open.gif \ - $(DOCGEN)/priv/js/flipmenu/flip_static.gif \ - $(DOCGEN)/priv/js/flipmenu/flipmenu.js $(HTMLDIR)/js/flipmenu - -endif - -# ---------------------------------------------------- -# Standard release target -# ---------------------------------------------------- - -ifneq ($(PREFIX),) - -release release_docs release_tests release_html: - $(MAKE) $(MFLAGS) RELEASE_PATH=$(PREFIX) $(TARGET_MAKEFILE) $@_spec - -endif diff --git a/lib/diameter/make/rules.mk.in b/lib/diameter/make/rules.mk.in deleted file mode 100644 index cd3c297d75..0000000000 --- a/lib/diameter/make/rules.mk.in +++ /dev/null @@ -1,193 +0,0 @@ -#-*-makefile-*- ; force emacs to enter makefile-mode -# ---------------------------------------------------- -# %CopyrightBegin% -# -# Copyright Ericsson AB 2009-2011. All Rights Reserved. -# -# The contents of this file are subject to the Erlang Public License, -# Version 1.1, (the "License"); you may not use this file except in -# compliance with the License. You should have received a copy of the -# Erlang Public License along with this software. If not, it can be -# retrieved online at http://www.erlang.org/. -# -# Software distributed under the License is distributed on an "AS IS" -# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See -# the License for the specific language governing rights and limitations -# under the License. -# -# %CopyrightEnd% - -.SUFFIXES: .erl .beam .yrl .hrl .xml .xmlsrc .html \ - .3 .1 .pdf .fo .el .elc - -# ---------------------------------------------------- -# Common macros -# ---------------------------------------------------- -DEFAULT_TARGETS = opt debug release release_docs clean docs - - -# Slash separated list of return values from $(origin VAR) -# that are untrusted - set default in this file instead. -# The list is not space separated since some return values -# contain space, and we want to use $(findstring ...) to -# search the list. -DUBIOUS_ORIGINS = /undefined/environment/ - - -# # ---------------------------------------------------- -# # TARGET definition -# # ---------------------------------------------------- -# # TARGET = @TARGET@ -# ifneq ($(OVERRIDE_TARGET),) -# ifneq ($(TARGET), $(OVERRIDE_TARGET)) -# $(warning overriding $$(TARGET) = \ -# "$(TARGET)" \ -# with \ -# $$(OVERRIDE_TARGET) = \ -# "$(OVERRIDE_TARGET)") -# override TARGET := $(OVERRIDE_TARGET) -# endif -# endif -# - -# ---------------------------------------------------- -# Command macros -# ---------------------------------------------------- -PREFIX = @prefix@ -INSTALL = @INSTALL@ -INSTALL_DIR = @INSTALL_DIR@ -INSTALL_PROGRAM = @INSTALL_PROGRAM@ -INSTALL_SCRIPT = @INSTALL_SCRIPT@ -INSTALL_DATA = @INSTALL_DATA@ - - -# ---------------------------------------------------- -# Erlang language section -# ---------------------------------------------------- -ERL_ROOT_DIR = @ERLANG_ROOT_DIR@ -ERL_LIB_DIR = @ERLANG_LIB_DIR@ -DOCGEN_DIR = @ERLANG_LIB_DIR_erl_docgen@ -TEST_SERVER_DIR = @ERLANG_LIB_VER_test_server@ -EMULATOR = beam -ERL_COMPILE_FLAGS += +debug_info -ERLC_WFLAGS = -W -ERLC = $(ERL_ROOT_DIR)/bin/erlc $(ERLC_WFLAGS) $(ERLC_FLAGS) -ERL = $(ERL_ROOT_DIR)/bin/erl -boot start_clean -#ERLC = @ERLC@ $(ERLC_WFLAGS) $(ERLC_FLAGS) -#ERL = @ERL@ -boot start_clean - -ifneq (,$(findstring $(origin EBIN),$(DUBIOUS_ORIGINS))) -EBIN = ../../ebin -endif - -# Generated (non ebin) files... -ifneq (,$(findstring $(origin EGEN),$(DUBIOUS_ORIGINS))) -EGEN = . -endif - -ifneq (,$(findstring $(origin ESRC),$(DUBIOUS_ORIGINS))) -ESRC = . -endif - -$(EBIN)/%.beam: $(EGEN)/%.erl - $(ERLC) $(ERL_COMPILE_FLAGS) -o$(EBIN) $< - -$(EBIN)/%.beam: $(ESRC)/%.erl - $(ERLC) $(ERL_COMPILE_FLAGS) -o$(EBIN) $< - -.erl.beam: - $(ERLC) $(ERL_COMPILE_FLAGS) -o$(dir $@) $< - - -# -# When .erl files are automatically created GNU make removes them if -# they were the result of a chain of implicit rules. To prevent this -# we say that all .erl files are "precious". -# -.PRECIOUS: %.erl %.fo - - -# ---------------------------------------------------- -# Documentation section -# ---------------------------------------------------- -# export VSN - -# TOPDOCDIR=../../../../doc - -DOCDIR = .. - -PDFDIR=$(DOCDIR)/pdf - -HTMLDIR = $(DOCDIR)/html - -MAN1DIR = $(DOCDIR)/man1 -MAN2DIR = $(DOCDIR)/man2 -MAN3DIR = $(DOCDIR)/man3 -MAN4DIR = $(DOCDIR)/man4 -MAN6DIR = $(DOCDIR)/man6 -MAN9DIR = $(DOCDIR)/man9 - -# HTML & GIF files that always are generated and must be delivered -XML_COLL_FILES = $(XML_APPLICATION_FILES) $(XML_PART_FILES) -DEFAULT_HTML_FILES = \ - $(XML_COLL_FILES:%.xml=$(HTMLDIR)/%_frame.html) \ - $(XML_COLL_FILES:%.xml=$(HTMLDIR)/%_first.html) \ - $(XML_COLL_FILES:%.xml=$(HTMLDIR)/%_term.html) \ - $(XML_COLL_FILES:%.xml=$(HTMLDIR)/%_cite.html) \ - $(XML_APPLICATION_FILES:%.xml=$(HTMLDIR)/%_index.html) \ - $(XML_APPLICATION_FILES:%.xml=$(HTMLDIR)/%.kwc) \ - $(HTMLDIR)/index.html - -DEFAULT_GIF_FILES = $(HTMLDIR)/min_head.gif - -# -# Flags & Commands -# -XSLTPROC = @XSLTPROC@ -FOP = @FOP@ - -DOCGEN=$(DOCGEN_DIR) - -$(MAN1DIR)/%.1:: %.xml - date=`date +"%B %e %Y"`; \ - xsltproc --output "$@" --stringparam company "Ericsson AB" --stringparam docgen "$(DOCGEN)" --stringparam gendate "$$date" --stringparam appname "$(APPLICATION)" --stringparam appver "$(VSN)" --xinclude -path $(DOCGEN)/priv/docbuilder_dtd -path $(DOCGEN)/priv/dtd_man_entities $(DOCGEN)/priv/xsl/db_man.xsl $< - - -$(MAN2DIR)/%.2:: %.xml - date=`date +"%B %e %Y"`; \ - xsltproc --output "$@" --stringparam company "Ericsson AB" --stringparam docgen "$(DOCGEN)" --stringparam gendate "$$date" --stringparam appname "$(APPLICATION)" --stringparam appver "$(VSN)" --xinclude -path $(DOCGEN)/priv/docbuilder_dtd -path $(DOCGEN)/priv/dtd_man_entities $(DOCGEN)/priv/xsl/db_man.xsl $< - - -$(MAN3DIR)/%.3:: %.xml - date=`date +"%B %e %Y"`; \ - xsltproc --output "$@" --stringparam company "Ericsson AB" --stringparam docgen "$(DOCGEN)" --stringparam gendate "$$date" --stringparam appname "$(APPLICATION)" --stringparam appver "$(VSN)" --xinclude -path $(DOCGEN)/priv/docbuilder_dtd -path $(DOCGEN)/priv/dtd_man_entities $(DOCGEN)/priv/xsl/db_man.xsl $< - -# left for compatibility -$(MAN4DIR)/%.4:: %.xml - date=`date +"%B %e %Y"`; \ - xsltproc --output "$@" --stringparam company "Ericsson AB" --stringparam docgen "$(DOCGEN)" --stringparam gendate "$$date" --stringparam appname "$(APPLICATION)" --stringparam appver "$(VSN)" --xinclude -path $(DOCGEN)/priv/docbuilder_dtd -path $(DOCGEN)/priv/dtd_man_entities $(DOCGEN)/priv/xsl/db_man.xsl $< - -$(MAN4DIR)/%.5:: %.xml - date=`date +"%B %e %Y"`; \ - xsltproc --output "$@" --stringparam company "Ericsson AB" --stringparam docgen "$(DOCGEN)" --stringparam gendate "$$date" --stringparam appname "$(APPLICATION)" --stringparam appver "$(VSN)" --xinclude -path $(DOCGEN)/priv/docbuilder_dtd -path $(DOCGEN)/priv/dtd_man_entities $(DOCGEN)/priv/xsl/db_man.xsl $< - -# left for compatibility -$(MAN6DIR)/%.6:: %_app.xml - date=`date +"%B %e %Y"`; \ - xsltproc --output "$@" --stringparam company "Ericsson AB" --stringparam docgen "$(DOCGEN)" --stringparam gendate "$$date" --stringparam appname "$(APPLICATION)" --stringparam appver "$(VSN)" --xinclude -path $(DOCGEN)/priv/docbuilder_dtd -path $(DOCGEN)/priv/dtd_man_entities $(DOCGEN)/priv/xsl/db_man.xsl $< - -$(MAN6DIR)/%.7:: %_app.xml - date=`date +"%B %e %Y"`; \ - xsltproc --output "$@" --stringparam company "Ericsson AB" --stringparam docgen "$(DOCGEN)" --stringparam gendate "$$date" --stringparam appname "$(APPLICATION)" --stringparam appver "$(VSN)" --xinclude -path $(DOCGEN)/priv/docbuilder_dtd -path $(DOCGEN)/priv/dtd_man_entities $(DOCGEN)/priv/xsl/db_man.xsl $< - -$(MAN9DIR)/%.9:: %.xml - date=`date +"%B %e %Y"`; \ - xsltproc --output "$@" --stringparam company "Ericsson AB" --stringparam docgen "$(DOCGEN)" --stringparam gendate "$$date" --stringparam appname "$(APPLICATION)" --stringparam appver "$(VSN)" --xinclude -path $(DOCGEN)/priv/docbuilder_dtd -path $(DOCGEN)/priv/dtd_man_entities $(DOCGEN)/priv/xsl/db_man.xsl $< - - -.xmlsrc.xml: - escript $(DOCGEN)/priv/bin/codeline_preprocessing.escript $< $@ - -.fo.pdf: - $(FOP) -fo $< -pdf $@ - diff --git a/lib/diameter/make/subdir.mk b/lib/diameter/make/subdir.mk deleted file mode 100644 index 24b08080ae..0000000000 --- a/lib/diameter/make/subdir.mk +++ /dev/null @@ -1,53 +0,0 @@ -# -# %CopyrightBegin% -# -# Copyright Ericsson AB 1997-2011. All Rights Reserved. -# -# The contents of this file are subject to the Erlang Public License, -# Version 1.1, (the "License"); you may not use this file except in -# compliance with the License. You should have received a copy of the -# Erlang Public License along with this software. If not, it can be -# retrieved online at http://www.erlang.org/. -# -# Software distributed under the License is distributed on an "AS IS" -# basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See -# the License for the specific language governing rights and limitations -# under the License. -# -# %CopyrightEnd% -# -# Make include file for otp - -.PHONY: debug opt release docs release_docs tests release_tests \ - clean depend valgrind - -# -# Targets that don't affect documentation directories -# -opt debug release docs release_docs tests release_tests clean depend valgrind: - @set -e ; \ - app_pwd=`pwd` ; \ - if test -f vsn.mk; then \ - echo "=== Entering application" `basename $$app_pwd` ; \ - fi ; \ - case "$(MAKE)" in *clearmake*) tflag="-T";; *) tflag="";; esac; \ - for d in $(SUB_DIRS); do \ - if test -f $$d/SKIP ; then \ - echo "=== Skipping subdir $$d, reason:" ; \ - cat $$d/SKIP ; \ - echo "===" ; \ - else \ - if test ! -d $$d ; then \ - echo "=== Skipping subdir $$d, it is missing" ; \ - else \ - xflag="" ; \ - if test -f $$d/ignore_config_record.inf; then \ - xflag=$$tflag ; \ - fi ; \ - (cd $$d && $(MAKE) $$xflag $@) || exit $$? ; \ - fi ; \ - fi ; \ - done ; \ - if test -f vsn.mk; then \ - echo "=== Leaving application" `basename $$app_pwd` ; \ - fi diff --git a/lib/diameter/make/target.mk b/lib/diameter/make/target.mk deleted file mode 100644 index 4ae470b9e2..0000000000 --- a/lib/diameter/make/target.mk +++ /dev/null @@ -1,33 +0,0 @@ -ifeq ($(OVERRIDE_TARGET),) - -ifeq ($(TARGET),) - -TARGET := $(shell $(DIAMETER_TOP)/autoconf/config.guess) - -else - -endif - -else - -ifneq ($(TARGET),) - -ifneq ($(TARGET), $(OVERRIDE_TARGET)) -$(warning overriding $$(TARGET) = \ - "$(TARGET)" \ - with \ - $$(OVERRIDE_TARGET) = \ - "$(OVERRIDE_TARGET)") -else -endif - -override TARGET := $(OVERRIDE_TARGET) - -else - -TARGET := $(OVERRIDE_TARGET) - -endif - -endif - diff --git a/lib/diameter/src/Makefile b/lib/diameter/src/Makefile index 99c343275b..060659bce9 100644 --- a/lib/diameter/src/Makefile +++ b/lib/diameter/src/Makefile @@ -16,13 +16,8 @@ # # %CopyrightEnd% -ifeq ($(ERL_TOP),) -include $(DIAMETER_TOP)/make/target.mk -include $(DIAMETER_TOP)/make/$(TARGET)/rules.mk -else include $(ERL_TOP)/make/target.mk include $(ERL_TOP)/make/$(TARGET)/otp.mk -endif # ---------------------------------------------------- # Application version @@ -210,11 +205,7 @@ dialyze: opt $(PLT) # Release targets # ---------------------------------------------------- -ifeq ($(ERL_TOP),) -include $(DIAMETER_TOP)/make/release_targets.mk -else include $(ERL_TOP)/make/otp_release_targets.mk -endif # Can't $(INSTALL_DIR) more than one directory at a time on Solaris. diff --git a/lib/diameter/src/base/diameter.appup.src b/lib/diameter/src/base/diameter.appup.src index 9b2a7d18ab..5655f98c1b 100644 --- a/lib/diameter/src/base/diameter.appup.src +++ b/lib/diameter/src/base/diameter.appup.src @@ -20,30 +20,38 @@ {"%VSN%", [ - {"0.9", [{restart_application, diameter}]}, - {"0.10", [{restart_application, diameter}]}, - {"1.0", [{restart_application, diameter}]}, - {"1.1", [%% new code - {add_module, diameter_transport}, - %% modified code - {load, diameter_sctp}, - {load, diameter_stats}, - {load, diameter_service}, - {load, diameter_config}, - {load, diameter_codec}, - {load, diameter_watchdog}, - {load, diameter_peer}, - {load, diameter_peer_fsm}, - {load, diameter}, - %% unmodified but including modified diameter.hrl - {load, diameter_callback}, - {load, diameter_capx}, - {load, diameter_types}]} + {"0.9", [{restart_application, diameter}]}, + {"0.10", [{restart_application, diameter}]}, + {"1.0", [{restart_application, diameter}]}, + {"1.1", [{restart_application, diameter}]}, + {"1.2", [{load, diameter}, + {load, diameter_capx}, + {load, diameter_codec}, + {load, diameter_peer}, + {load, diameter_reg}, + %% order significant from here + {load, diameter_session}, + {load, diameter_peer_fsm}, + {load, diameter_service}, + {load, diameter_watchdog}, + {load, diameter_config}]}, + {"1.2.1", [{load, diameter}, + {load, diameter_capx}, + {load, diameter_peer}, + {load, diameter_reg}, + %% order significant from here + {load, diameter_session}, + {load, diameter_peer_fsm}, + {load, diameter_service}, + {load, diameter_watchdog}, + {load, diameter_config}]} ], [ - {"0.9", [{restart_application, diameter}]}, - {"0.10", [{restart_application, diameter}]}, - {"1.0", [{restart_application, diameter}]}, - {"1.1", [{restart_application, diameter}]} + {"0.9", [{restart_application, diameter}]}, + {"0.10", [{restart_application, diameter}]}, + {"1.0", [{restart_application, diameter}]}, + {"1.1", [{restart_application, diameter}]}, + {"1.2", [{restart_application, diameter}]}, + {"1.2.1", [{restart_application, diameter}]} ] }. diff --git a/lib/diameter/src/base/diameter.erl b/lib/diameter/src/base/diameter.erl index 4f90b741ae..8f9901907a 100644 --- a/lib/diameter/src/base/diameter.erl +++ b/lib/diameter/src/base/diameter.erl @@ -44,6 +44,8 @@ stop/0]). -export_type([evaluable/0, + restriction/0, + sequence/0, app_alias/0, service_name/0, capability/0, @@ -280,11 +282,23 @@ call(SvcName, App, Message) -> | fun() | maybe_improper_list(evaluable(), list()). +-type sequence() + :: {'Unsigned32'(), 0..32}. + +-type restriction() + :: false + | node + | nodes + | [node()] + | evaluable(). + %% Options passed to start_service/2 -type service_opt() :: capability() - | {application, [application_opt()]}. + | {application, [application_opt()]} + | {restrict_connections, restriction()} + | {sequence, sequence() | evaluable()}. -type application_opt() :: {alias, app_alias()} @@ -316,6 +330,8 @@ call(SvcName, App, Message) -> | {applications, [app_alias()]} | {capabilities, [capability()]} | {capabilities_cb, evaluable()} + | {capx_timeout, 'Unsigned32'()} + | {disconnect_cb, evaluable()} | {watchdog_timer, 'Unsigned32'() | {module(), atom(), list()}} | {reconnect_timer, 'Unsigned32'()} | {private, any()}. diff --git a/lib/diameter/src/base/diameter_capx.erl b/lib/diameter/src/base/diameter_capx.erl index 6c4d60ee9b..c6c3d2934d 100644 --- a/lib/diameter/src/base/diameter_capx.erl +++ b/lib/diameter/src/base/diameter_capx.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2011. All Rights Reserved. +%% Copyright Ericsson AB 2010-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -141,7 +141,9 @@ cap('Host-IP-Address', Vs) when is_list(Vs) -> lists:map(fun ipaddr/1, Vs); -cap('Firmware-Revision', V) -> +cap(K, V) + when K == 'Firmware-Revision'; + K == 'Origin-State-Id' -> [V]; cap(_, Vs) @@ -149,7 +151,7 @@ cap(_, Vs) Vs; cap(K, V) -> - ?THROW({invalid, K, V}). + ?THROW({invalid, {K,V}}). ipaddr(A) -> try diff --git a/lib/diameter/src/base/diameter_codec.erl b/lib/diameter/src/base/diameter_codec.erl index 421e280422..a94d37f7a8 100644 --- a/lib/diameter/src/base/diameter_codec.erl +++ b/lib/diameter/src/base/diameter_codec.erl @@ -333,6 +333,9 @@ decode_header(_) -> %% wraparound counter. The 8-bit counter is incremented each time the %% system is restarted. +sequence_numbers({_,_} = T) -> + T; + sequence_numbers(#diameter_packet{bin = Bin}) when is_binary(Bin) -> sequence_numbers(Bin); diff --git a/lib/diameter/src/base/diameter_config.erl b/lib/diameter/src/base/diameter_config.erl index e47f63f814..63d28f25a2 100644 --- a/lib/diameter/src/base/diameter_config.erl +++ b/lib/diameter/src/base/diameter_config.erl @@ -97,6 +97,9 @@ -record(monitor, {mref = make_ref() :: reference(), service}). %% name +%% The default sequence mask. +-define(NOMASK, {0,32}). + %% Time to lay low before restarting a dead service. -define(RESTART_SLEEP, 2000). @@ -549,9 +552,11 @@ make_config(SvcName, Opts) -> ok = encode_CER(COpts), - Os = split(Opts, [{[fun erlang:is_boolean/1], false, share_peers}, - {[fun erlang:is_boolean/1], false, use_shared_peers}, - {[fun erlang:is_pid/1, false], false, monitor}]), + Os = split(Opts, fun opt/2, [{false, share_peers}, + {false, use_shared_peers}, + {false, monitor}, + {?NOMASK, sequence}, + {nodes, restrict_connections}]), %% share_peers and use_shared_peers are currently undocumented. #service{name = SvcName, @@ -559,11 +564,66 @@ make_config(SvcName, Opts) -> capabilities = Caps}, options = Os}. +split(Opts, F, Defs) -> + [{K, F(K, get_opt(K, Opts, D))} || {D,K} <- Defs]. + +opt(K, false = B) + when K /= sequence -> + B; + +opt(K, true = B) + when K == share_peer; + K == use_shared_peers -> + B; + +opt(monitor, P) + when is_pid(P) -> + P; + +opt(restrict_connections, T) + when T == node; + T == nodes; + T == []; + is_atom(hd(T)) -> + T; + +opt(restrict_connections = K, F) -> + try diameter_lib:eval(F) of %% no guarantee that it won't fail later + Nodes when is_list(Nodes) -> + F; + V -> + ?THROW({value, {K,V}}) + catch + E:R -> + ?THROW({value, {K, E, R, ?STACK}}) + end; + +opt(sequence, {_,_} = T) -> + sequence(T); + +opt(sequence = K, F) -> + try diameter_lib:eval(F) of + T -> sequence(T) + catch + E:R -> + ?THROW({value, {K, E, R, ?STACK}}) + end; + +opt(K, _) -> + ?THROW({value, K}). + +sequence({H,N} = T) + when 0 =< N, N =< 32, 0 =< H, 0 == H bsr N -> + T; + +sequence(_) -> + ?THROW({value, sequence}). + make_caps(Caps, Opts) -> case diameter_capx:make_caps(Caps, Opts) of {ok, T} -> T; - {error, {Reason, _}} -> + {error, Reason} -> ?THROW(Reason) end. @@ -663,21 +723,6 @@ get_opt(Key, List, Def) -> _ -> ?THROW({arity, Key}) end. -split(Opts, Defs) -> - [{K, value(D, Opts)} || {_,_,K} = D <- Defs]. - -value({Preds, Def, Key}, Opts) -> - V = get_opt(Key, Opts, Def), - lists:any(fun(P) -> pred(P,V) end, Preds) - orelse ?THROW({value, Key}), - V. - -pred(F, V) - when is_function(F) -> - F(V); -pred(T, V) -> - T == V. - cb(M,F) -> try M:F() of V -> V diff --git a/lib/diameter/src/base/diameter_peer.erl b/lib/diameter/src/base/diameter_peer.erl index 46b2ba9465..1b2f32ddff 100644 --- a/lib/diameter/src/base/diameter_peer.erl +++ b/lib/diameter/src/base/diameter_peer.erl @@ -76,7 +76,7 @@ notify(SvcName, T) -> %%% # start/3 %%% --------------------------------------------------------------------------- -%% From old code: make is restart. +%% From old code: make it restart. start(_T, _Opts, #diameter_service{}) -> {error, restart}. diff --git a/lib/diameter/src/base/diameter_peer_fsm.erl b/lib/diameter/src/base/diameter_peer_fsm.erl index 302540e76b..c4320fcb99 100644 --- a/lib/diameter/src/base/diameter_peer_fsm.erl +++ b/lib/diameter/src/base/diameter_peer_fsm.erl @@ -48,43 +48,64 @@ -include("diameter_internal.hrl"). -include("diameter_gen_base_rfc3588.hrl"). +%% Values of Disconnect-Cause in DPR. -define(GOAWAY, ?'DIAMETER_BASE_DISCONNECT-CAUSE_DO_NOT_WANT_TO_TALK_TO_YOU'). -define(REBOOT, ?'DIAMETER_BASE_DISCONNECT-CAUSE_REBOOTING'). +-define(BUSY, ?'DIAMETER_BASE_DISCONNECT-CAUSE_BUSY'). -define(NO_INBAND_SECURITY, 0). -define(TLS, 1). %% Keys in process dictionary. --define(CB_KEY, cb). %% capabilities callback --define(DWA_KEY, dwa). %% outgoing DWA --define(Q_KEY, q). %% transport start queue --define(START_KEY, start). %% start of connected transport +-define(CB_KEY, cb). %% capabilities callback +-define(DPR_KEY, dpr). %% disconnect callback +-define(DWA_KEY, dwa). %% outgoing DWA +-define(REF_KEY, ref). %% transport_ref() +-define(Q_KEY, q). %% transport start queue +-define(START_KEY, start). %% start of connected transport +-define(SEQUENCE_KEY, mask). %% mask for sequence numbers +-define(RESTRICT_KEY, restrict). %% nodes for connection check + +%% The default sequence mask. +-define(NOMASK, {0,32}). %% A 2xxx series Result-Code. Not necessarily 2001. -define(IS_SUCCESS(N), 2 == (N) div 1000). +%% Guards. +-define(IS_UINT32(N), (is_integer(N) andalso 0 =< N andalso 0 == N bsr 32)). +-define(IS_TIMEOUT(N), ?IS_UINT32(N)). +-define(IS_CAUSE(N), N == ?REBOOT; N == rebooting; + N == ?GOAWAY; N == goaway; + N == ?BUSY; N == busy). + %% RFC 3588: %% %% Timeout An application-defined timer has expired while waiting %% for some event. %% -define(EVENT_TIMEOUT, 10000). +%% Default timeout for reception of CER/CEA. -%% How long to wait for a DPA in response to DPR before simply -%% aborting. Used to distinguish between shutdown and not but there's -%% not really any need. Stopping a service will require a timeout if -%% the peer doesn't answer DPR so the value should be short-ish. +%% Default timeout for DPA in response to DPR. A bit short but the +%% timeout used to be hardcoded. (So it could be worse.) -define(DPA_TIMEOUT, 1000). +-type uint32() :: diameter:'Unsigned32'(). + -record(state, - {state = 'Wait-Conn-Ack' %% state of RFC 3588 Peer State Machine - :: 'Wait-Conn-Ack' | recv_CER | 'Wait-CEA' | 'Open', + {state %% of RFC 3588 Peer State Machine + :: 'Wait-Conn-Ack' %% old code + | {'Wait-Conn-Ack', uint32()} + | recv_CER + | 'Wait-CEA' %% old code + | {'Wait-CEA', uint32(), uint32()} + | 'Open', mode :: accept | connect | {connect, reference()}, - parent :: pid(), - transport :: pid(), + parent :: pid(), %% watchdog process + transport :: pid(), %% transport process service :: #diameter_service{}, - dpr = false :: false | {diameter:'Unsigned32'(), - diameter:'Unsigned32'()}}). + dpr = false :: false | {uint32(), uint32()}}). %% | hop by hop and end to end identifiers %% There are non-3588 states possible as a consequence of 5.6.1 of the @@ -121,7 +142,10 @@ %%% Output: Pid %%% --------------------------------------------------------------------------- --spec start(T, [Opt], #diameter_service{}) +-spec start(T, [Opt], #diameter_service{} %% from old code + | {diameter:sequence(), + diameter:restriction(), + #diameter_service{}}) -> pid() when T :: {connect|accept, diameter:transport_ref()}, Opt :: diameter:transport_opt(). @@ -131,10 +155,8 @@ %% specified on the transport in question. Check here that the list is %% still non-empty. -start({_,_} = Type, Opts, #diameter_service{applications = Apps} = Svc) -> - [] /= Apps orelse ?ERROR({no_apps, Type, Opts}), - T = {self(), Type, Opts, Svc}, - {ok, Pid} = diameter_peer_fsm_sup:start_child(T), +start({_,_} = Type, Opts, MS) -> + {ok, Pid} = diameter_peer_fsm_sup:start_child({self(), Type, Opts, MS}), Pid. start_link(T) -> @@ -153,15 +175,28 @@ init(T) -> proc_lib:init_ack({ok, self()}), gen_server:enter_loop(?MODULE, [], i(T)). -i({WPid, T, Opts, #diameter_service{capabilities = Caps} = Svc}) -> - putr(?DWA_KEY, dwa(Caps)), +i({WPid, Type, Opts, #diameter_service{} = Svc}) -> %% from old code + i({WPid, Type, Opts, {?NOMASK, [node() | nodes()], Svc}}); + +i({WPid, T, Opts, {Mask, Nodes, #diameter_service{applications = Apps, + capabilities = LCaps} + = Svc}}) -> + [] /= Apps orelse ?ERROR({no_apps, T, Opts}), + putr(?DWA_KEY, dwa(LCaps)), {M, Ref} = T, diameter_stats:reg(Ref), - {[Ts], Rest} = proplists:split(Opts, [capabilities_cb]), - putr(?CB_KEY, {Ref, [F || {_,F} <- Ts]}), + {[Cs,Ds], Rest} = proplists:split(Opts, [capabilities_cb, disconnect_cb]), + putr(?CB_KEY, {Ref, [F || {_,F} <- Cs]}), + putr(?DPR_KEY, [F || {_, F} <- Ds]), + putr(?REF_KEY, Ref), + putr(?SEQUENCE_KEY, Mask), + putr(?RESTRICT_KEY, Nodes), erlang:monitor(process, WPid), {TPid, Addrs} = start_transport(T, Rest, Svc), - #state{parent = WPid, + Tmo = proplists:get_value(capx_timeout, Opts, ?EVENT_TIMEOUT), + ?IS_TIMEOUT(Tmo) orelse ?ERROR({invalid, {capx_timeout, Tmo}}), + #state{state = {'Wait-Conn-Ack', Tmo}, + parent = WPid, transport = TPid, mode = M, service = svc(Svc, Addrs)}. @@ -174,8 +209,8 @@ i({WPid, T, Opts, #diameter_service{capabilities = Caps} = Svc}) -> %% watchdog start (start/2) succeeds regardless so as not to crash the %% service. -start_transport(T, Opts, #diameter_service{capabilities = Caps} = Svc) -> - Addrs0 = Caps#diameter_caps.host_ip_address, +start_transport(T, Opts, #diameter_service{capabilities = LCaps} = Svc) -> + Addrs0 = LCaps#diameter_caps.host_ip_address, start_transport(Addrs0, {T, Opts, Svc}). start_transport(Addrs0, T) -> @@ -198,9 +233,9 @@ svc(Svc, []) -> svc(Svc, Addrs) -> readdr(Svc, Addrs). -readdr(#diameter_service{capabilities = Caps0} = Svc, Addrs) -> - Caps = Caps0#diameter_caps{host_ip_address = Addrs}, - Svc#diameter_service{capabilities = Caps}. +readdr(#diameter_service{capabilities = LCaps0} = Svc, Addrs) -> + LCaps = LCaps0#diameter_caps{host_ip_address = Addrs}, + Svc#diameter_service{capabilities = LCaps}. %% The 4-tuple Data returned from diameter_peer:start/1 identifies the %% transport module/config use to start the transport process in @@ -299,13 +334,17 @@ eraser(Key) -> %% transition/2 +%% Started in old code. +transition(T, #state{state = 'Wait-Conn-Ack' = PS} = S) -> + transition(T, S#state{state = {PS, ?EVENT_TIMEOUT}}); + %% Connection to peer. transition({diameter, {TPid, connected, Remote}}, #state{transport = TPid, state = PS, mode = M} = S) -> - 'Wait-Conn-Ack' = PS, %% assert + {'Wait-Conn-Ack', _} = PS, %% assert connect = M, %% keep_transport(TPid), send_CER(S#state{mode = {M, Remote}}); @@ -317,11 +356,11 @@ transition({diameter, {TPid, connected}}, mode = M, parent = Pid} = S) -> - 'Wait-Conn-Ack' = PS, %% assert + {'Wait-Conn-Ack', Tmo} = PS, %% assert accept = M, %% keep_transport(TPid), Pid ! {accepted, self()}, - start_timer(S#state{state = recv_CER}); + start_timer(Tmo, S#state{state = recv_CER}); %% Connection established after receiving a connection_timeout %% message. This may be followed by an incoming message which arrived @@ -335,7 +374,7 @@ transition({diameter, {_, connected, _}}, _) -> %% Connection has timed out: start an alternate. transition({connection_timeout = T, TPid}, #state{transport = TPid, - state = 'Wait-Conn-Ack'} + state = {'Wait-Conn-Ack', _}} = S) -> exit(TPid, {shutdown, T}), start_next(S); @@ -350,7 +389,7 @@ transition({diameter, {recv, Pkt}}, S) -> %% Timeout when still in the same state ... transition({timeout, PS}, #state{state = PS}) -> - stop; + {stop, {capx(PS), timeout}}; %% ... or not. transition({timeout, _}, _) -> @@ -361,25 +400,19 @@ transition({send, Msg}, #state{transport = TPid}) -> send(TPid, Msg), ok; -%% Request for graceful shutdown. -transition({shutdown, Pid}, #state{parent = Pid, dpr = false} = S) -> - dpr(?GOAWAY, S); -transition({shutdown, Pid}, #state{parent = Pid}) -> - ok; - -%% Application shutdown. -transition(shutdown, #state{dpr = false} = S) -> - dpr(?REBOOT, S); -transition(shutdown, _) -> %% DPR already send: ensure expected timeout - dpa_timer(), +%% Messages from old (diameter_service) code. +transition(shutdown = T, #state{parent = Pid} = S) -> + transition({T, Pid, service}, S); %% Reason irrelevant: old code has no cb + +%% Request for graceful shutdown at remove_transport, stop_service of +%% application shutdown. +transition({shutdown = T, Pid}, S) -> + transition({T, Pid, transport}, S); +transition({shutdown, Pid, Reason}, #state{parent = Pid, dpr = false} = S) -> + dpr(Reason, S); +transition({shutdown, Pid, _}, #state{parent = Pid}) -> ok; -%% Request to close the transport connection. -transition({close = T, Pid}, #state{parent = Pid, - transport = TPid}) -> - diameter_peer:close(TPid), - {stop, T}; - %% DPA reception has timed out. transition(dpa_timeout, _) -> stop; @@ -411,6 +444,11 @@ transition({state, Pid}, #state{state = S, transport = TPid}) -> %% Crash on anything unexpected. +capx(recv_CER) -> + 'CER'; +capx({'Wait-CEA', _, _}) -> + 'CEA'. + %% start_next/1 start_next(#state{service = Svc0} = S) -> @@ -426,18 +464,23 @@ start_next(#state{service = Svc0} = S) -> %% send_CER/1 -send_CER(#state{mode = {connect, Remote}, - service = #diameter_service{capabilities = Caps}, +send_CER(#state{state = {'Wait-Conn-Ack', Tmo}, + mode = {connect, Remote}, + service = #diameter_service{capabilities = LCaps}, transport = TPid} = S) -> - OH = Caps#diameter_caps.origin_host, + OH = LCaps#diameter_caps.origin_host, req_send_CER(OH, Remote) orelse - close({already_connected, Remote, Caps}, S), + close({already_connected, Remote, LCaps}, S), CER = build_CER(S), ?LOG(send, 'CER'), - send(TPid, encode(CER)), - start_timer(S#state{state = 'Wait-CEA'}). + #diameter_packet{header = #diameter_header{end_to_end_id = Eid, + hop_by_hop_id = Hid}} + = Pkt + = encode(CER), + send(TPid, Pkt), + start_timer(Tmo, S#state{state = {'Wait-CEA', Hid, Eid}}). %% Register ourselves as connecting to the remote endpoint in %% question. This isn't strictly necessary since a peer implementing @@ -449,23 +492,36 @@ send_CER(#state{mode = {connect, Remote}, req_send_CER(OriginHost, Remote) -> register_everywhere({?MODULE, connection, OriginHost, {remote, Remote}}). -%% start_timer/1 +%% start_timer/2 -start_timer(#state{state = PS} = S) -> - erlang:send_after(?EVENT_TIMEOUT, self(), {timeout, PS}), +start_timer(Tmo, #state{state = PS} = S) -> + erlang:send_after(Tmo, self(), {timeout, PS}), S. %% build_CER/1 -build_CER(#state{service = #diameter_service{capabilities = Caps}}) -> - {ok, CER} = diameter_capx:build_CER(Caps), +build_CER(#state{service = #diameter_service{capabilities = LCaps}}) -> + {ok, CER} = diameter_capx:build_CER(LCaps), CER. %% encode/1 encode(Rec) -> - #diameter_packet{bin = Bin} = diameter_codec:encode(?BASE, Rec), - Bin. + Seq = diameter_session:sequence(sequence()), + Hdr = #diameter_header{version = ?DIAMETER_VERSION, + end_to_end_id = Seq, + hop_by_hop_id = Seq}, + diameter_codec:encode(?BASE, #diameter_packet{header = Hdr, + msg = Rec}). + +sequence() -> + case getr(?SEQUENCE_KEY) of + {_,_} = Mask -> + Mask; + undefined -> %% started in old code + putr(?SEQUENCE_KEY, ?NOMASK), + ?NOMASK + end. %% recv/2 @@ -524,7 +580,14 @@ discard(Reason, F, A) -> %% rcv/3 %% Incoming CEA. -rcv('CEA', Pkt, #state{state = 'Wait-CEA'} = S) -> +rcv('CEA', + #diameter_packet{header = #diameter_header{end_to_end_id = Eid, + hop_by_hop_id = Hid}} + = Pkt, + #state{state = {'Wait-CEA' = T, Hid, Eid}} + = S) -> + handle_CEA(Pkt, S#state{state = T}); +rcv('CEA', Pkt, #state{state = 'Wait-CEA'} = S) -> %% old code handle_CEA(Pkt, S); %% Incoming CER @@ -544,16 +607,16 @@ rcv(N, Pkt, S) N == 'DPR' -> handle_request(N, Pkt, S); -%% DPA even though we haven't sent DPR: ignore. -rcv('DPA', _Pkt, #state{dpr = false}) -> - ok; - -%% DPA in response to DPR. We could check the sequence numbers but -%% don't bother, just close. -rcv('DPA' = N, _Pkt, #state{transport = TPid}) -> +%% DPA in response to DPR and with the expected identifiers. +rcv('DPA' = N, + #diameter_packet{header = #diameter_header{end_to_end_id = Eid, + hop_by_hop_id = Hid}}, + #state{transport = TPid, + dpr = {Hid, Eid}}) -> diameter_peer:close(TPid), {stop, N}; +%% Ignore anything else, an unsolicited DPA in particular. rcv(_, _, _) -> ok. @@ -771,8 +834,8 @@ a('CER', #diameter_caps{vendor_id = Vid, {'Product-Name', Name}, {'Origin-State-Id', OSI}]; -a('DPR', #diameter_caps{origin_host = Host, - origin_realm = Realm}) -> +a('DPR', #diameter_caps{origin_host = {Host, _}, + origin_realm = {Realm, _}}) -> ['DPA', {'Origin-Host', Host}, {'Origin-Realm', Realm}]. @@ -880,7 +943,9 @@ rejected(N) %% open/5 -open(Pkt, SupportedApps, Caps, {Type, IS}, #state{parent = Pid} = S) -> +open(Pkt, SupportedApps, Caps, {Type, IS}, #state{parent = Pid, + service = Svc} + = S) -> #diameter_caps{origin_host = {_,_} = H, inband_security_id = {LS,_}} = Caps, @@ -888,7 +953,9 @@ open(Pkt, SupportedApps, Caps, {Type, IS}, #state{parent = Pid} = S) -> tls_ack(lists:member(?TLS, LS), Caps, Type, IS, S), Pid ! {open, self(), H, {Caps, SupportedApps, Pkt}}, - S#state{state = 'Open'}. + %% Replace capabilities record with local/remote pairs. + S#state{state = 'Open', + service = Svc#diameter_service{capabilities = Caps}}. %% We've advertised TLS support: tell the transport the result %% and expect a reply when the handshake is complete. @@ -941,38 +1008,148 @@ dwa(#diameter_caps{origin_host = OH, {'Origin-State-Id', OSI}]. %% dpr/2 +%% +%% The RFC isn't clear on whether DPR should be send in a non-Open +%% state. The Peer State Machine transitions it documents aren't +%% exhaustive (no Stop in Wait-I-CEA for example) so assume it's up to +%% the implementation and transition to Closed (ie. die) if we haven't +%% yet reached Open. + +%% Connection is open, DPR has not been sent. +dpr(Reason, #state{state = 'Open', + dpr = false, + service = #diameter_service{capabilities = Caps}} + = S) -> + case getr(?DPR_KEY) of + CBs when is_list(CBs) -> + Ref = getr(?REF_KEY), + Peer = {self(), Caps}, + dpr(CBs, [Reason, Ref, Peer], S); + undefined -> %% started in old code + send_dpr(Reason, [], S) + end; -dpr(Cause, #state{transport = TPid, - service = #diameter_service{capabilities = Caps}} - = S) -> - #diameter_caps{origin_host = OH, - origin_realm = OR} +%% Connection is open, DPR already sent. +dpr(_, #state{state = 'Open'}) -> + ok; + +%% Connection not open. +dpr(_Reason, _S) -> + stop. + +%% dpr/3 +%% +%% Note that an implementation that wants to do something +%% transport_module-specific can lookup the pid of the transport +%% process and contact it. (eg. diameter:service_info/2) + +dpr([CB|Rest], [Reason | _] = Args, S) -> + try diameter_lib:eval([CB | Args]) of + {dpr, Opts} when is_list(Opts) -> + send_dpr(Reason, Opts, S); + dpr -> + send_dpr(Reason, [], S); + close = T -> + {stop, {disconnect_cb, T}}; + ignore -> + dpr(Rest, Args, S); + T -> + No = {disconnect_cb, T}, + diameter_lib:error_report(invalid, No), + {stop, No} + catch + E:R -> + No = {disconnect_cb, E, R, ?STACK}, + diameter_lib:error_report(failure, No), + {stop, No} + end; + +dpr([], [Reason | _], S) -> + send_dpr(Reason, [], S). + +-record(opts, {cause, timeout = ?DPA_TIMEOUT}). + +send_dpr(Reason, Opts, #state{transport = TPid, + service = #diameter_service{capabilities = Caps}} + = S) -> + #opts{cause = Cause, timeout = Tmo} + = lists:foldl(fun opt/2, + #opts{cause = case Reason of + transport -> ?GOAWAY; + _ -> ?REBOOT + end, + timeout = ?DPA_TIMEOUT}, + Opts), + #diameter_caps{origin_host = {OH, _}, + origin_realm = {OR, _}} = Caps, - Bin = encode(['DPR', {'Origin-Host', OH}, + #diameter_packet{header = #diameter_header{end_to_end_id = Eid, + hop_by_hop_id = Hid}} + = Pkt + = encode(['DPR', {'Origin-Host', OH}, {'Origin-Realm', OR}, {'Disconnect-Cause', Cause}]), - send(TPid, Bin), - dpa_timer(), + send(TPid, Pkt), + dpa_timer(Tmo), ?LOG(send, 'DPR'), - S#state{dpr = diameter_codec:sequence_numbers(Bin)}. - -dpa_timer() -> - erlang:send_after(?DPA_TIMEOUT, self(), dpa_timeout). + S#state{dpr = {Hid, Eid}}. + +opt({timeout, Tmo}, Rec) + when ?IS_TIMEOUT(Tmo) -> + Rec#opts{timeout = Tmo}; +opt({cause, Cause}, Rec) + when ?IS_CAUSE(Cause) -> + Rec#opts{cause = cause(Cause)}; +opt(T, _) -> + ?ERROR({invalid_option, T}). + +cause(rebooting) -> ?REBOOT; +cause(goaway) -> ?GOAWAY; +cause(busy) -> ?BUSY; +cause(N) + when ?IS_CAUSE(N) -> + N; +cause(N) -> + ?ERROR({invalid_cause, N}). + +dpa_timer(Tmo) -> + erlang:send_after(Tmo, self(), dpa_timeout). %% register_everywhere/1 %% %% Register a term and ensure it's not registered elsewhere. Note that %% two process that simultaneously register the same term may well %% both fail to do so this isn't foolproof. +%% +%% Everywhere is no longer everywhere, it's where a +%% restrict_connections service_opt() specifies. register_everywhere(T) -> - diameter_reg:add_new(T) - andalso unregistered(T). + reg(getr(?RESTRICT_KEY), T). + +reg(Nodes, T) -> + add(lists:member(node(), Nodes), T) andalso unregistered(Nodes, T). + +add(true, T) -> + diameter_reg:add_new(T); +add(false, T) -> + diameter_reg:add(T). + +%% unregistered +%% +%% Ensure that the term in question isn't registered on other nodes. + +unregistered(Nodes, T) -> + {ResL, _} = rpc:multicall(Nodes, ?MODULE, match, [{node(), T}]), + lists:all(fun nomatch/1, ResL). + +nomatch({badrpc, {'EXIT', {undef, _}}}) -> %% no diameter on remote node + true; +nomatch(L) -> + [] == L. -unregistered(T) -> - {ResL, _} = rpc:multicall(?MODULE, match, [{node(), T}]), - lists:all(fun(L) -> [] == L end, ResL). +%% match/1 match({Node, _}) when Node == node() -> diff --git a/lib/diameter/src/base/diameter_reg.erl b/lib/diameter/src/base/diameter_reg.erl index 882b9da238..619b12ecad 100644 --- a/lib/diameter/src/base/diameter_reg.erl +++ b/lib/diameter/src/base/diameter_reg.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2011. All Rights Reserved. +%% Copyright Ericsson AB 2010-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -30,7 +30,8 @@ add_new/1, del/1, repl/2, - match/1]). + match/1, + wait/1]). -export([start_link/0]). @@ -65,27 +66,22 @@ %% Table entry containing the Term -> Pid mapping. -define(MAPPING(Term, Pid), {Term, Pid}). --record(state, {id = now()}). - -%%% ---------------------------------------------------------- -%%% # add(T) -%%% -%%% Input: Term = term() -%%% -%%% Output: true -%%% -%%% Description: Associate the specified term with self(). The list of pids -%%% having this or other assocations can be retrieved using -%%% match/1. -%%% -%%% An association is removed when the calling process dies -%%% or as a result of calling del/1. Adding the same term -%%% more than once is equivalent to adding it exactly once. -%%% -%%% Note that since match/1 takes a pattern as argument, -%%% specifying a term that contains match variables is -%%% probably not a good idea -%%% ---------------------------------------------------------- +-record(state, {id = now(), + q = []}). %% [{From, Pat}] + +%% =========================================================================== +%% # add(T) +%% +%% Associate the specified term with self(). The list of pids having +%% this or other assocations can be retrieved using match/1. +%% +%% An association is removed when the calling process dies or as a +%% result of calling del/1. Adding the same term more than once is +%% equivalent to adding it exactly once. +%% +%% Note that since match/1 takes a pattern as argument, specifying a +%% term that contains match variables is probably not a good idea +%% =========================================================================== -spec add(any()) -> true. @@ -93,17 +89,12 @@ add(T) -> call({add, fun ets:insert/2, T, self()}). -%%% ---------------------------------------------------------- -%%% # add_new(T) -%%% -%%% Input: T = term() -%%% -%%% Output: true | false -%%% -%%% Description: Like add/1 but only one process is allowed to have the -%%% the association, false being returned if an association -%%% already exists. -%%% ---------------------------------------------------------- +%% =========================================================================== +%% # add_new(T) +%% +%% Like add/1 but only one process is allowed to have the the +%% association, false being returned if an association already exists. +%% =========================================================================== -spec add_new(any()) -> boolean(). @@ -111,16 +102,12 @@ add(T) -> add_new(T) -> call({add, fun insert_new/2, T, self()}). -%%% ---------------------------------------------------------- -%%% # repl(T, NewT) -%%% -%%% Input: T, NewT = term() -%%% -%%% Output: true | false -%%% -%%% Description: Like add/1 but only replace an existing association on T, -%%% false being returned if it doesn't exist. -%%% ---------------------------------------------------------- +%% =========================================================================== +%% # repl(T, NewT) +%% +%% Like add/1 but only replace an existing association on T, false +%% being returned if it doesn't exist. +%% =========================================================================== -spec repl(any(), any()) -> boolean(). @@ -128,15 +115,11 @@ add_new(T) -> repl(T, U) -> call({repl, T, U, self()}). -%%% ---------------------------------------------------------- -%%% # del(Term) -%%% -%%% Input: Term = term() -%%% -%%% Output: true -%%% -%%% Description: Remove any existing association of Term with self(). -%%% ---------------------------------------------------------- +%% =========================================================================== +%% # del(Term) +%% +%% Remove any existing association of Term with self(). +%% =========================================================================== -spec del(any()) -> true. @@ -144,20 +127,16 @@ repl(T, U) -> del(T) -> call({del, T, self()}). -%%% ---------------------------------------------------------- -%%% # match(Pat) -%%% -%%% Input: Pat = pattern in the sense of ets:match_object/2. -%%% -%%% Output: list of {Term, Pid} -%%% -%%% Description: Return the list of associations whose Term, as specified -%%% to add/1 or add_new/1, matches the specified pattern. -%%% -%%% Note that there's no guarantee that the returned processes -%%% are still alive. (Although one that isn't will soon have -%%% its associations removed.) -%%% ---------------------------------------------------------- +%% =========================================================================== +%% # match(Pat) +%% +%% Return the list of associations whose Term, as specified to add/1 +%% or add_new/1, matches the specified pattern. +%% +%% Note that there's no guarantee that the returned processes are +%% still alive. (Although one that isn't will soon have its +%% associations removed.) +%% =========================================================================== -spec match(tuple()) -> [{term(), pid()}]. @@ -165,9 +144,17 @@ del(T) -> match(Pat) -> ets:match_object(?TABLE, ?MAPPING(Pat, '_')). -%% --------------------------------------------------------- -%% EXPORTED INTERNAL FUNCTIONS -%% --------------------------------------------------------- +%% =========================================================================== +%% # wait(Pat) +%% +%% Like match/1 but return only when the result is non-empty or fails. +%% It's up to the caller to ensure that the wait won't be forever. +%% =========================================================================== + +wait(Pat) -> + call({wait, Pat}). + +%% =========================================================================== start_link() -> ServerName = {local, ?SERVER}, @@ -182,7 +169,7 @@ uptime() -> %% pids/0 %% -%% Output: list of {Pid, [Term, ...]} +%% Return: list of {Pid, [Term, ...]} pids() -> to_list(fun swap/1). @@ -202,89 +189,100 @@ id(T) -> T. %% terms/0 %% -%% Output: list of {Term, [Pid, ...]} +%% Return: list of {Term, [Pid, ...]} terms() -> to_list(fun id/1). swap({X,Y}) -> {Y,X}. -%%% ---------------------------------------------------------- -%%% # init(Role) -%%% -%%% Output: {ok, State} -%%% ---------------------------------------------------------- +%% ---------------------------------------------------------- +%% # init/1 +%% ---------------------------------------------------------- init(_) -> ets:new(?TABLE, [bag, named_table]), {ok, #state{}}. -%%% ---------------------------------------------------------- -%%% # handle_call(Request, From, State) -%%% ---------------------------------------------------------- +%% ---------------------------------------------------------- +%% # handle_call/3 +%% ---------------------------------------------------------- -handle_call({add, Fun, Key, Pid}, _, State) -> +handle_call(Req, From, S) + when not is_record(S, state) -> + handle_call(Req, From, upgrade(S)); + +handle_call({add, Fun, Key, Pid}, _, S) -> B = Fun(?TABLE, {Key, Pid}), monitor(B andalso no_monitor(Pid), Pid), - {reply, B, State}; + {reply, B, pending(B, S)}; -handle_call({del, Key, Pid}, _, State) -> - {reply, ets:delete_object(?TABLE, ?MAPPING(Key, Pid)), State}; +handle_call({del, Key, Pid}, _, S) -> + {reply, ets:delete_object(?TABLE, ?MAPPING(Key, Pid)), S}; -handle_call({repl, T, U, Pid}, _, State) -> +handle_call({repl, T, U, Pid}, _, S) -> MatchSpec = [{?MAPPING('$1', Pid), [{'=:=', '$1', {const, T}}], ['$_']}], - {reply, repl(ets:select(?TABLE, MatchSpec), U, Pid), State}; + {reply, repl(ets:select(?TABLE, MatchSpec), U, Pid), S}; + +handle_call({wait, Pat}, From, #state{q = Q} = S) -> + case find(Pat) of + {ok, L} -> + {reply, L, S}; + false -> + {noreply, S#state{q = [{From, Pat} | Q]}} + end; -handle_call(state, _, State) -> - {reply, State, State}; +handle_call(state, _, S) -> + {reply, S, S}; -handle_call(uptime, _, #state{id = Time} = State) -> - {reply, diameter_lib:now_diff(Time), State}; +handle_call(uptime, _, #state{id = Time} = S) -> + {reply, diameter_lib:now_diff(Time), S}; -handle_call(Req, From, State) -> +handle_call(Req, From, S) -> ?UNEXPECTED([Req, From]), - {reply, nok, State}. + {reply, nok, S}. -%%% ---------------------------------------------------------- -%%% # handle_cast(Request, State) -%%% ---------------------------------------------------------- +%% ---------------------------------------------------------- +%% # handle_cast/2 +%% ---------------------------------------------------------- -handle_cast(Msg, State)-> +handle_cast(Msg, S)-> ?UNEXPECTED([Msg]), - {noreply, State}. + {noreply, S}. -%%% ---------------------------------------------------------- -%%% # handle_info(Request, State) -%%% ---------------------------------------------------------- +%% ---------------------------------------------------------- +%% # handle_info/2 +%% ---------------------------------------------------------- -handle_info({'DOWN', MRef, process, Pid, _}, State) -> +handle_info({'DOWN', MRef, process, Pid, _}, S) -> ets:delete_object(?TABLE, ?MONITOR(Pid, MRef)), ets:match_delete(?TABLE, ?MAPPING('_', Pid)), - {noreply, State}; + {noreply, S}; -handle_info(Info, State) -> +handle_info(Info, S) -> ?UNEXPECTED([Info]), - {noreply, State}. + {noreply, S}. -%%% ---------------------------------------------------------- -%%% # terminate(Reason, State) -%%% ---------------------------------------------------------- +%% ---------------------------------------------------------- +%% # terminate/2 +%% ---------------------------------------------------------- terminate(_Reason, _State)-> ok. -%%% ---------------------------------------------------------- -%%% # code_change(OldVsn, State, Extra) -%%% ---------------------------------------------------------- +%% ---------------------------------------------------------- +%% # code_change/3 +%% ---------------------------------------------------------- code_change(_OldVsn, State, _Extra) -> {ok, State}. -%% --------------------------------------------------------- -%% INTERNAL FUNCTIONS -%% --------------------------------------------------------- +%% =========================================================================== + +upgrade(S) -> + #state{} = list_to_tuple(tuple_to_list(S) ++ [[]]). monitor(true, Pid) -> ets:insert(?TABLE, ?MONITOR(Pid, erlang:monitor(process, Pid))); @@ -321,6 +319,37 @@ repl([?MAPPING(_, Pid) = M], Key, Pid) -> repl([], _, _) -> false. +%% pending/1 + +pending(true, #state{q = [_|_] = Q} = S) -> + S#state{q = q(lists:reverse(Q), [])}; %% retain reply order +pending(_, S) -> + S. + +q([], Q) -> + Q; +q([{From, Pat} = T | Rest], Q) -> + case find(Pat) of + {ok, L} -> + gen_server:reply(From, L), + q(Rest, Q); + false -> + q(Rest, [T|Q]) + end. + +%% find/1 + +find(Pat) -> + try match(Pat) of + [] -> + false; + L -> + {ok, L} + catch + _:_ -> + {ok, []} + end. + %% call/1 call(Request) -> diff --git a/lib/diameter/src/base/diameter_service.erl b/lib/diameter/src/base/diameter_service.erl index 725cccda1e..91384b8b91 100644 --- a/lib/diameter/src/base/diameter_service.erl +++ b/lib/diameter/src/base/diameter_service.erl @@ -64,7 +64,7 @@ -include_lib("diameter/include/diameter.hrl"). -include("diameter_internal.hrl"). -%% The "old" states maintained in this module historically. +%% The states mirrored by peer_up/peer_down callbacks. -define(STATE_UP, up). -define(STATE_DOWN, down). @@ -107,6 +107,12 @@ %% process. -define(STATE_TABLE, ?MODULE). +%% The default sequence mask. +-define(NOMASK, {0,32}). + +%% The default restrict_connections. +-define(RESTRICT, nodes). + %% Workaround for dialyzer's lack of understanding of match specs. -type match(T) :: T | '_' | '$1' | '$2' | '$3' | '$4'. @@ -114,15 +120,18 @@ %% State of service gen_server. -record(state, {id = now(), - service_name, %% as passed to start_service/2, key in ?STATE_TABLE + service_name, %% as passed to start_service/2, key in ?STATE_TABLE service :: #diameter_service{}, - peerT = ets_new(peers) :: ets:tid(), %% #peer{} at start_fsm - connT = ets_new(conns) :: ets:tid(), %% #conn{} at connection_up - share_peers = false :: boolean(), %% broadcast peers to remote nodes? - use_shared_peers = false :: boolean(), %% use broadcasted peers? + peerT = ets_new(peers) :: ets:tid(),%% #peer{} at start_fsm + connT = ets_new(conns) :: ets:tid(),%% #conn{} at connection_up/reopen shared_peers = ?Dict:new(), %% Alias -> [{TPid, Caps}, ...] local_peers = ?Dict:new(), %% Alias -> [{TPid, Caps}, ...] - monitor = false :: false | pid()}). %% process to die with + monitor = false :: false | pid(), %% process to die with + options + :: [{sequence, diameter:sequence()} %% sequence mask + | {restrict_connections, diameter:restriction()} + | {share_peers, boolean()} %% broadcast peers to remote nodes? + | {use_shared_peers, boolean()}]}).%% use broadcasted peers? %% shared_peers reflects the peers broadcast from remote nodes. Note %% that the state term itself doesn't change, which is relevant for %% the stateless application callbacks since the state is retrieved @@ -130,7 +139,12 @@ %% service record is used to determine whether or not we need to call %% the process for a pick_peer callback. -%% Record representing a watchdog process. +%% Record representing a watchdog process as implemented by +%% diameter_watchdog. The term "peer" here is historical, made +%% especially confusing by the fact that a peer_ref() in the +%% documentation is the key of a #conn{} record, not a #peer{} record. +%% The name is also unfortunate given the meaning of peer in the +%% Diameter sense. -record(peer, {pid :: match(pid()), type :: match(connect | accept), @@ -140,9 +154,15 @@ :: match(op_state() | {op_state(), wd_state()}), started = now(), %% at process start conn = false :: match(boolean() | pid())}). - %% true at accept, pid() at connection_up (connT key) - -%% Record representing a peer_fsm process. + %% true at accepted, pid() at connection_up or reopen + +%% Record representing a peer process as implemented by +%% diameter_peer_fsm. The term "conn" is historical. Despite the name +%% here, comments refer to watchdog and peer processes, that are keys +%% in #peer{} and #conn{} records respectively. To add to the +%% confusion, a #request.transport is a peer process = key in a +%% #conn{} record. The actual transport process (that the peer process +%% knows about and that has a transport connection) isn't seen here. -record(conn, {pid :: pid(), apps :: [{0..16#FFFFFFFF, diameter:app_alias()}], %% {Id, Alias} @@ -156,10 +176,9 @@ handler :: match(pid()), %% request process transport :: match(pid()), %% peer process caps :: match(#diameter_caps{}), - app :: match(diameter:app_alias()), %% #diameter_app.alias - dictionary :: match(module()), %% #diameter_app.dictionary - module :: match([module() | list()]), - %% #diameter_app.module + app :: match(diameter:app_alias()),%% #diameter_app.alias + dictionary :: match(module()), %% #diameter_app.dictionary + module :: match([module() | list()]), %% #diameter_app.module filter :: match(diameter:peer_filter()), packet :: match(#diameter_packet{})}). @@ -170,20 +189,6 @@ timeout = ?DEFAULT_TIMEOUT :: 0..16#FFFFFFFF, detach = false :: boolean()}). -%% Since RFC 3588 requires that a Diameter agent not modify End-to-End -%% Identifiers, the possibility of explicitly setting an End-to-End -%% Identifier would be needed to be able to implement an agent in -%% which one side of the communication is not implemented on top of -%% diameter. For example, Diameter being sent or received encapsulated -%% in some other protocol, or even another Diameter stack in a -%% non-Erlang environment. (Not that this is likely to be a normal -%% case.) -%% -%% The implemented solution is not an option but to respect any header -%% values set in a diameter_header record returned from a -%% prepare_request callback. A call to diameter:call/4 can communicate -%% values to the callback using the 'extra' option if so desired. - %%% --------------------------------------------------------------------------- %%% # start(SvcName) %%% --------------------------------------------------------------------------- @@ -236,20 +241,20 @@ stop_transport(SvcName, [_|_] = Refs) -> %%% --------------------------------------------------------------------------- info(SvcName, Item) -> - info_rc(call_service_by_name(SvcName, {info, Item})). - -info_rc({error, _}) -> - undefined; -info_rc(Info) -> - Info. + case find_state(SvcName) of + #state{} = S -> + service_info(Item, S); + false -> + undefined + end. %%% --------------------------------------------------------------------------- %%% # receive_message(TPid, Pkt, MessageData) %%% --------------------------------------------------------------------------- -%% Handle an incoming message in the watchdog process. This used to -%% come through the service process but this avoids that becoming a -%% bottleneck. +%% Handle an incoming Diameter message in the watchdog process. This +%% used to come through the service process but this avoids that +%% becoming a bottleneck. receive_message(TPid, Pkt, T) when is_pid(TPid) -> @@ -329,21 +334,39 @@ call_rc(_, _, Sent) -> %% In the process spawned for the outgoing request. call(SvcName, App, Msg, Opts, Caller) -> - c(ets:lookup(?STATE_TABLE, SvcName), App, Msg, Opts, Caller). + c(find_state(SvcName), App, Msg, Opts, Caller). -c([#state{service_name = SvcName} = S], App, Msg, Opts, Caller) -> +c(#state{service_name = Svc, options = [{_, Mask} | _]} = S, + App, + Msg, + Opts, + Caller) -> case find_transport(App, Msg, Opts, S) of {_,_,_} = T -> - send_request(T, Msg, Opts, Caller, SvcName); + send_request(T, Mask, Msg, Opts, Caller, Svc); false -> {error, no_connection}; {error, _} = No -> No end; -c([], _, _, _, _) -> +c(false, _, _, _, _) -> {error, no_service}. +%% find_state/1 + +find_state(SvcName) -> + fs(ets:lookup(?STATE_TABLE, SvcName)). + +fs([#state{} = S]) -> + S; + +fs([S]) -> %% inserted from old code + upgrade(S); + +fs([]) -> + false. + %% make_options/1 make_options(Options) -> @@ -439,6 +462,10 @@ i(_, false) -> %%% # handle_call(Req, From, State) %%% --------------------------------------------------------------------------- +handle_call(T, From, S) + when not is_record(S, state) -> + handle_call(T, From, upgrade(S)); + handle_call(state, _, S) -> {reply, S, S}; @@ -462,16 +489,25 @@ handle_call({pick_peer, Local, Remote, App}, _From, S) -> handle_call({call_module, AppMod, Req}, From, S) -> call_module(AppMod, Req, From, S); +%% Call from old code. handle_call({info, Item}, _From, S) -> {reply, service_info(Item, S), S}; handle_call(stop, _From, S) -> - shutdown(S), + shutdown(service, S), {stop, normal, ok, S}; %% The server currently isn't guaranteed to be dead when the caller %% gets the reply. We deal with this in the call to the server, %% stating a monitor that waits for DOWN before returning. +%% Watchdog is asking for the sequence mask. +handle_call(sequence, _From, #state{options = [{_, Mask} | _]} = S) -> + {reply, Mask, S}; + +%% Watchdog is asking for the nodes restriction. +handle_call(restriction, _From, #state{options = [_,_,_,{_,R} | _]} = S) -> + {reply, R, S}; + handle_call(Req, From, S) -> unexpected(handle_call, [Req, From], S), {reply, nok, S}. @@ -488,15 +524,16 @@ handle_cast(Req, S) -> %%% # handle_info(Req, State) %%% --------------------------------------------------------------------------- -handle_info(T,S) -> +handle_info(T, #state{} = S) -> case transition(T,S) of ok -> {noreply, S}; - #state{} = NS -> - {noreply, NS}; {stop, Reason} -> {stop, {shutdown, Reason}, S} - end. + end; + +handle_info(T, S) -> + handle_info(T, upgrade(S)). %% transition/2 @@ -507,15 +544,26 @@ transition({accepted, Pid, TPid}, S) -> %% Peer process has a new open connection. transition({connection_up, Pid, T}, S) -> - connection_up(Pid, T, S); + connection_up(Pid, T, S), + ok; + +%% Watchdog has a new connection that will be opened after DW[RA] +%% exchange. This message was added long after connection_up, to +%% communicate the information as soon as it's available. Leave +%% connection_up as is it for now, duplicated information and all. +transition({reopen, Pid, T}, S) -> + reopen(Pid, T, S), + ok; -%% Peer process has left state open. +%% Watchdog has left state OKAY. transition({connection_down, Pid}, S) -> - connection_down(Pid, S); + connection_down(Pid, S), + ok; -%% Peer process has returned to state open. +%% Watchdog has returned to state OKAY. transition({connection_up, Pid}, S) -> - connection_up(Pid, S); + connection_up(Pid, S), + ok; %% Accepting transport has lost connectivity. transition({close, Pid}, S) -> @@ -529,7 +577,7 @@ transition({reconnect, Pid}, S) -> %% Watchdog is sending notification of a state transition. Note that %% the connection_up/down messages are pre-date this message and are -%% still used. A 'watchdog' message will follow these and communicate +%% still used. A watchdog message will follow these and communicate %% the same state as was set in handling connection_up/down. transition({watchdog, Pid, {TPid, From, To}}, #state{service_name = SvcName, peerT = PeerT}) -> @@ -539,21 +587,22 @@ transition({watchdog, Pid, {TPid, From, To}}, #state{service_name = SvcName, insert(PeerT, P#peer{op_state = {OS, To}}), send_event(SvcName, {watchdog, Ref, TPid, {From, To}, {T, Opts}}), ok; -%% Death of a peer process results in the removal of it's peer and any -%% associated conn record when 'DOWN' is received (after this) but the -%% states will be {?STATE_UP, ?WD_DOWN} for a short time. (No real -%% problem since ?WD_* is only used in service_info.) We set ?WD_OKAY -%% as a consequence of connection_up since we know a watchdog is -%% coming. We can't set anything at connection_down since we don't -%% know if the subsequent watchdog message will be ?WD_DOWN or -%% ?WD_SUSPECT. We don't (yet) set ?STATE_* as a consequence of a -%% watchdog message since this requires changing some of the matching -%% on ?STATE_*. -%% -%% Death of a conn process results in connection_down followed by -%% watchdog ?WD_DOWN. The latter doesn't result in the conn record -%% being deleted since 'DOWN' from death of its peer doesn't (yet) -%% deal with the record having been removed. +%% Death of a watchdog process (#peer.pid) results in the removal of +%% it's peer and any associated conn record when 'DOWN' is received +%% (after this) but the states will be {?STATE_UP, ?WD_DOWN} for a +%% short time. (No real problem since ?WD_* is only used in +%% service_info.) We set ?WD_OKAY as a consequence of connection_up +%% since we know a watchdog is coming. We can't set anything at +%% connection_down since we don't know if the subsequent watchdog +%% message will be ?WD_DOWN or ?WD_SUSPECT. We don't (yet) set +%% ?STATE_* as a consequence of a watchdog message since this requires +%% changing some of the matching on ?STATE_*. +%% +%% Death of a peer process process (#conn.pid, #peer.conn) results in +%% connection_down followed by watchdog ?WD_DOWN. The latter doesn't +%% result in the conn record being deleted since 'DOWN' from death of +%% its watchdog doesn't (yet) deal with the record having been +%% removed. %% Monitor process has died. Just die with a reason that tells %% diameter_config about the happening. If a cleaner shutdown is @@ -561,23 +610,26 @@ transition({watchdog, Pid, {TPid, From, To}}, #state{service_name = SvcName, transition({'DOWN', MRef, process, _, Reason}, #state{monitor = MRef}) -> {stop, {monitor, Reason}}; -%% Local peer process has died. +%% Local watchdog process has died. transition({'DOWN', _, process, Pid, Reason}, S) when node(Pid) == node() -> - peer_down(Pid, Reason, S); + peer_down(Pid, Reason, S), + ok; -%% Remote service wants to know about shared transports. +%% Remote service wants to know about shared peers. transition({service, Pid}, S) -> share_peers(Pid, S), ok; %% Remote service is communicating a shared peer. transition({peer, TPid, Aliases, Caps}, S) -> - remote_peer_up(TPid, Aliases, Caps, S); + remote_peer_up(TPid, Aliases, Caps, S), + ok; %% Remote peer process has died. transition({'DOWN', _, process, TPid, _}, S) -> - remote_peer_down(TPid, S); + remote_peer_down(TPid, S), + ok; %% Restart after tc expiry. transition({tc_timeout, T}, S) -> @@ -591,18 +643,48 @@ transition({failover, TRef, Seqs}, S) -> failover(TRef, Seqs, S), ok; +%% Ensure upgraded state is stored in state table. +transition(upgrade, _) -> + ok; + transition(Req, S) -> unexpected(handle_info, [Req], S), ok. +%% upgrade/1 + +upgrade({state, Id, Svc, Name, Svc, PT, CT, SB, UB, SD, LD, MPid}) -> + S = #state{id = Id, + service_name = Name, + service = Svc, + peerT = PT, + connT = CT, + shared_peers = SD, + local_peers = LD, + monitor = MPid, + options = [{sequence, ?NOMASK}, + {share_peers, SB}, + {use_shared_peers, UB}, + {restrict_connections, ?RESTRICT}]}, + upgrade_insert(S), + S. + +upgrade_insert(#state{service = #diameter_service{pid = Pid}} = S) -> + if Pid == self() -> + ets:insert(?STATE_TABLE, S); + true -> + Pid ! upgrade + end. + %%% --------------------------------------------------------------------------- %%% # terminate(Reason, State) %%% --------------------------------------------------------------------------- terminate(Reason, #state{service_name = Name} = S) -> + send_event(Name, stop), ets:delete(?STATE_TABLE, Name), shutdown == Reason %% application shutdown - andalso shutdown(S). + andalso shutdown(application, S). %%% --------------------------------------------------------------------------- %%% # code_change(FromVsn, State, Extra) @@ -685,41 +767,49 @@ mod_state(Alias, ModS) -> %%% # shutdown/2 %%% --------------------------------------------------------------------------- -shutdown(Refs, #state{peerT = PeerT}) -> - ets:foldl(fun(P,ok) -> s(P, Refs), ok end, ok, PeerT). - -s(#peer{ref = Ref, pid = Pid}, Refs) -> - s(lists:member(Ref, Refs), Pid); - -s(true, Pid) -> - Pid ! {shutdown, self()}; %% 'DOWN' will cleanup as usual -s(false, _) -> - ok. - -%%% --------------------------------------------------------------------------- -%%% # shutdown/1 -%%% --------------------------------------------------------------------------- +%% remove_transport: ask watchdogs to terminate their transport. +shutdown(Refs, #state{peerT = PeerT}) + when is_list(Refs) -> + ets:foldl(fun(P,ok) -> sp(P, Refs), ok end, ok, PeerT); -shutdown(#state{peerT = PeerT}) -> +%% application/service shutdown: ask transports to terminate themselves. +shutdown(Reason, #state{peerT = PeerT}) -> %% A transport might not be alive to receive the shutdown request %% but give those that are a chance to shutdown gracefully. - wait(fun st/2, PeerT), + shutdown(conn, Reason, PeerT), %% Kill the watchdogs explicitly in case there was no transport. - wait(fun sw/2, PeerT). + shutdown(peer, Reason, PeerT). -wait(Fun, T) -> - diameter_lib:wait(ets:foldl(Fun, [], T)). +%% sp/2 -st(#peer{conn = B}, Acc) - when is_boolean(B) -> - Acc; -st(#peer{conn = Pid}, Acc) -> - Pid ! shutdown, - [Pid | Acc]. +sp(#peer{ref = Ref, pid = Pid}, Refs) -> + lists:member(Ref, Refs) + andalso (Pid ! {shutdown, self()}). %% 'DOWN' cleans up + +%% shutdown/3 + +shutdown(Who, Reason, T) -> + diameter_lib:wait(ets:foldl(fun(X,A) -> shutdown(Who, X, Reason, A) end, + [], + T)). + +shutdown(conn = Who, #peer{op_state = {OS,_}} = P, Reason, Acc) -> + shutdown(Who, P#peer{op_state = OS}, Reason, Acc); + +shutdown(conn, + #peer{pid = Pid, op_state = ?STATE_UP, conn = TPid}, + Reason, + Acc) -> + TPid ! {shutdown, Pid, Reason}, + [TPid | Acc]; -sw(#peer{pid = Pid}, Acc) -> +shutdown(peer, #peer{pid = Pid}, _Reason, Acc) + when is_pid(Pid) -> exit(Pid, shutdown), - [Pid | Acc]. + [Pid | Acc]; + +shutdown(_, #peer{}, _, Acc) -> + Acc. %%% --------------------------------------------------------------------------- %%% # call_service/2 @@ -772,6 +862,7 @@ i(SvcName) -> lists:foreach(fun(T) -> start_fsm(T,S) end, CL), init_shared(S), + send_event(SvcName, start), S. cfg_acc({SvcName, #diameter_service{applications = Apps} = Rec, Opts}, @@ -779,9 +870,8 @@ cfg_acc({SvcName, #diameter_service{applications = Apps} = Rec, Opts}, lists:foreach(fun init_mod/1, Apps), S = #state{service_name = SvcName, service = Rec#diameter_service{pid = self()}, - share_peers = get_value(share_peers, Opts), - use_shared_peers = get_value(use_shared_peers, Opts), - monitor = mref(get_value(monitor, Opts))}, + monitor = mref(get_value(monitor, Opts)), + options = service_options(Opts)}, {S, Acc}; cfg_acc({_Ref, Type, _Opts} = T, {S, Acc}) @@ -789,15 +879,24 @@ cfg_acc({_Ref, Type, _Opts} = T, {S, Acc}) Type == listen -> {S, [T | Acc]}. +service_options(Opts) -> + [{sequence, proplists:get_value(sequence, Opts, ?NOMASK)}, + {share_peers, get_value(share_peers, Opts)}, + {use_shared_peers, get_value(use_shared_peers, Opts)}, + {restrict_connections, proplists:get_value(restrict_connections, + Opts, + ?RESTRICT)}]. +%% The order of options is significant since we match against the list. + mref(false = No) -> No; mref(P) -> erlang:monitor(process, P). -init_shared(#state{use_shared_peers = true, +init_shared(#state{options = [_, _, {_, true} | _], service_name = Svc}) -> diameter_peer:notify(Svc, {service, self()}); -init_shared(#state{use_shared_peers = false}) -> +init_shared(#state{options = [_, _, {_, false} | _]}) -> ok. init_mod(#diameter_app{alias = Alias, @@ -860,9 +959,8 @@ start(Ref, Type, Opts, #state{peerT = PeerT, Pid. %% Note that the service record passed into the watchdog is the merged -%% record so that each watchdog (and peer_fsm) may get a different -%% record. This record is what is passed back into application -%% callbacks. +%% record so that each watchdog may get a different record. This +%% record is what is passed back into application callbacks. s(Type, Ref, T) -> case diameter_watchdog:start({Type, Ref}, T) of @@ -913,8 +1011,8 @@ accepted(Pid, _TPid, #state{peerT = PeerT} = S) -> #peer{ref = Ref, type = accept = T, conn = false, options = Opts} = P = fetch(PeerT, Pid), - insert(PeerT, P#peer{conn = true}), %% mark replacement transport started - start(Ref, T, Opts, S). %% start new peer + insert(PeerT, P#peer{conn = true}), %% mark replacement as started + start(Ref, T, Opts, S). %% start new watchdog fetch(Tid, Key) -> [T] = ets:lookup(Tid, Key), @@ -929,11 +1027,9 @@ fetch(Tid, Key) -> %%% --------------------------------------------------------------------------- %%% # connection_up/3 -%%% -%%% Output: #state{} %%% --------------------------------------------------------------------------- -%% Peer process has reached the open state. +%% Watchdog process has reached state OKAY. connection_up(Pid, {TPid, {Caps, SApps, Pkt}}, #state{peerT = PeerT, connT = ConnT} @@ -948,9 +1044,29 @@ connection_up(Pid, {TPid, {Caps, SApps, Pkt}}, #state{peerT = PeerT, connection_up([Pkt], P#peer{conn = TPid}, C, S). %%% --------------------------------------------------------------------------- +%%% # reopen/3 +%%% --------------------------------------------------------------------------- + +%% Note that this connection_up/3 rewrites the same #conn{} now +%% written here. Both do so in case reopen has not happened in old +%% code. + +reopen(Pid, {TPid, {Caps, SApps, _Pkt}}, #state{peerT = PeerT, + connT = ConnT}) -> + P = fetch(PeerT, Pid), + C = #conn{pid = TPid, + apps = SApps, + caps = Caps, + peer = Pid}, + + insert(ConnT, C), + #peer{op_state = {?STATE_DOWN, _}} + = P, + insert(PeerT, P#peer{op_state = {?STATE_DOWN, ?WD_REOPEN}, + conn = TPid}). + +%%% --------------------------------------------------------------------------- %%% # connection_up/2 -%%% -%%% Output: #state{} %%% --------------------------------------------------------------------------- %% Peer process has transitioned back into the open state. Note that there @@ -979,10 +1095,8 @@ connection_up(T, P, C, #state{peerT = PeerT, insert(PeerT, P#peer{op_state = {?STATE_UP, ?WD_OKAY}}), request_peer_up(TPid), - report_status(up, P, C, S, T), - S#state{local_peers = insert_local_peer(SApps, - {{TPid, Caps}, {SvcName, Apps}}, - LDict)}. + insert_local_peer(SApps, {{TPid, Caps}, {SvcName, Apps}}, LDict), + report_status(up, P, C, S, T). insert_local_peer(SApps, T, LDict) -> lists:foldl(fun(A,D) -> ilp(A, T, D) end, LDict, SApps). @@ -1024,11 +1138,9 @@ peer_cb(MFA, Alias) -> %%% --------------------------------------------------------------------------- %%% # connection_down/2 -%%% -%%% Output: #state{} %%% --------------------------------------------------------------------------- -%% Peer process has transitioned out of the open state. +%% Watchdog has transitioned out of state OKAY. connection_down(Pid, #state{peerT = PeerT, connT = ConnT} @@ -1044,8 +1156,8 @@ connection_down(Pid, #state{peerT = PeerT, %% connection_down/3 -connection_down(#peer{op_state = {?STATE_DOWN, _}}, _, S) -> - S; +connection_down(#peer{op_state = {?STATE_DOWN, _}}, _, _) -> + ok; connection_down(#peer{conn = TPid, op_state = {?STATE_UP, _}} @@ -1058,12 +1170,8 @@ connection_down(#peer{conn = TPid, local_peers = LDict} = S) -> report_status(down, P, C, S, []), - NewS = S#state{local_peers - = remove_local_peer(SApps, - {{TPid, Caps}, {SvcName, Apps}}, - LDict)}, - request_peer_down(TPid, NewS), - NewS. + remove_local_peer(SApps, {{TPid, Caps}, {SvcName, Apps}}, LDict), + request_peer_down(TPid, S). remove_local_peer(SApps, T, LDict) -> lists:foldl(fun(A,D) -> rlp(A, T, D) end, LDict, SApps). @@ -1082,11 +1190,9 @@ down_conn(Id, Alias, TC, {SvcName, Apps}) -> %%% --------------------------------------------------------------------------- %%% # peer_down/3 -%%% -%%% Output: #state{} %%% --------------------------------------------------------------------------- -%% Peer process has died. +%% Watchdog process has died. peer_down(Pid, Reason, #state{peerT = PeerT} = S) -> P = fetch(PeerT, Pid), @@ -1106,12 +1212,12 @@ closed({shutdown, {close, _TPid, Reason}}, closed(_, _, _) -> ok. -%% The peer has never come up ... -peer_down(#peer{conn = B}, S) +%% The watchdog has never reached OKAY ... +peer_down(#peer{conn = B}, _) when is_boolean(B) -> - S; + ok; -%% ... or it has. +%% ... or maybe it has. peer_down(#peer{conn = TPid} = P, #state{connT = ConnT} = S) -> #conn{} = C = fetch(ConnT, TPid), ets:delete_object(ConnT, C), @@ -1139,7 +1245,7 @@ restart(#peer{ref = Ref, started = Time}) -> {Time, {Ref, T, Opts}}; -%% ... or it has: a replacement transport has already been spawned. +%% ... or it has: a replacement has already been spawned. restart(#peer{type = accept}) -> false. @@ -1165,8 +1271,8 @@ default_tc(connect, Opts) -> default_tc(accept, _) -> 0. -%% Bound tc below if the peer was restarted recently to avoid -%% continuous in case of faulty config or other problems. +%% Bound tc below if the watchdog was restarted recently to avoid +%% continuous restarted in case of faulty config or other problems. tc(Time, Tc) -> choose(Tc > ?RESTART_TC orelse timer:now_diff(now(), Time) > 1000*?RESTART_TC, @@ -1288,7 +1394,7 @@ cm([_,_|_], _, _, _) -> multiple. %%% --------------------------------------------------------------------------- -%%% # send_request/5 +%%% # send_request/6 %%% --------------------------------------------------------------------------- %% Send an outgoing request in its dedicated process. @@ -1301,71 +1407,89 @@ cm([_,_|_], _, _, _) -> %% The mod field of the #diameter_app{} here includes any extra %% arguments passed to diameter:call/2. -send_request({TPid, Caps, App}, Msg, Opts, Caller, SvcName) -> +send_request({TPid, Caps, App} = T, Mask, Msg, Opts, Caller, SvcName) -> #diameter_app{module = ModX} = App, - Pkt = make_request_packet(Msg), - - case cb(ModX, prepare_request, [Pkt, SvcName, {TPid, Caps}]) of - {send, P} -> - send_request(make_request_packet(P, Pkt), - TPid, - Caps, - App, - Opts, - Caller, - SvcName); - {discard, Reason} -> - {error, Reason}; - discard -> - {error, discarded}; - T -> - ?ERROR({invalid_return, prepare_request, App, T}) - end. + Pkt = make_prepare_packet(Mask, Msg), + + send_req(cb(ModX, prepare_request, [Pkt, SvcName, {TPid, Caps}]), + Pkt, + T, + Opts, + Caller, + SvcName, + []). + +send_req({send, P}, Pkt, T, Opts, Caller, SvcName, Fs) -> + send_req(make_request_packet(P, Pkt), T, Opts, Caller, SvcName, Fs); + +send_req({discard, Reason} , _, _, _, _, _, _) -> + {error, Reason}; -%% make_request_packet/1 +send_req(discard, _, _, _, _, _, _) -> + {error, discarded}; + +send_req({eval_packet, RC, F}, Pkt, T, Opts, Caller, SvcName, Fs) -> + send_req(RC, Pkt, T, Opts, Caller, SvcName, [F|Fs]); + +send_req(E, _, {_, _, App}, _, _, _, _) -> + ?ERROR({invalid_return, prepare_request, App, E}). + +%% make_prepare_packet/2 %% %% Turn an outgoing request as passed to call/4 into a diameter_packet %% record in preparation for a prepare_request callback. -make_request_packet(Bin) +make_prepare_packet(_, Bin) when is_binary(Bin) -> #diameter_packet{header = diameter_codec:decode_header(Bin), bin = Bin}; -make_request_packet(#diameter_packet{msg = [#diameter_header{} = Hdr | Avps]} - = Pkt) -> - Pkt#diameter_packet{msg = [make_request_header(Hdr) | Avps]}; +make_prepare_packet(Mask, #diameter_packet{msg = [#diameter_header{} = Hdr + | Avps]} + = Pkt) -> + Pkt#diameter_packet{msg = [make_prepare_header(Mask, Hdr) | Avps]}; -make_request_packet(#diameter_packet{header = Hdr} = Pkt) -> - Pkt#diameter_packet{header = make_request_header(Hdr)}; +make_prepare_packet(Mask, #diameter_packet{header = Hdr} = Pkt) -> + Pkt#diameter_packet{header = make_prepare_header(Mask, Hdr)}; -make_request_packet(Msg) -> - make_request_packet(#diameter_packet{msg = Msg}). +make_prepare_packet(Mask, Msg) -> + make_prepare_packet(Mask, #diameter_packet{msg = Msg}). -%% make_request_header/1 +%% make_prepare_header/1 -make_request_header(undefined) -> - Seq = diameter_session:sequence(), - make_request_header(#diameter_header{end_to_end_id = Seq, +make_prepare_header(Mask, undefined) -> + Seq = diameter_session:sequence(Mask), + make_prepare_header(#diameter_header{end_to_end_id = Seq, hop_by_hop_id = Seq}); -make_request_header(#diameter_header{version = undefined} = Hdr) -> - make_request_header(Hdr#diameter_header{version = ?DIAMETER_VERSION}); +make_prepare_header(Mask, #diameter_header{end_to_end_id = undefined, + hop_by_hop_id = undefined}) -> + Seq = diameter_session:sequence(Mask), + make_prepare_header(#diameter_header{end_to_end_id = Seq, + hop_by_hop_id = Seq}); -make_request_header(#diameter_header{end_to_end_id = undefined} = H) -> - Seq = diameter_session:sequence(), - make_request_header(H#diameter_header{end_to_end_id = Seq}); +make_prepare_header(Mask, #diameter_header{end_to_end_id = undefined} = H) -> + Seq = diameter_session:sequence(Mask), + make_prepare_header(H#diameter_header{end_to_end_id = Seq}); -make_request_header(#diameter_header{hop_by_hop_id = undefined} = H) -> - Seq = diameter_session:sequence(), - make_request_header(H#diameter_header{hop_by_hop_id = Seq}); +make_prepare_header(Mask, #diameter_header{hop_by_hop_id = undefined} = H) -> + Seq = diameter_session:sequence(Mask), + make_prepare_header(H#diameter_header{hop_by_hop_id = Seq}); -make_request_header(#diameter_header{} = Hdr) -> +make_prepare_header(_, Hdr) -> + make_prepare_header(Hdr). + +%% make_prepare_header/1 + +make_prepare_header(#diameter_header{version = undefined} = Hdr) -> + make_prepare_header(Hdr#diameter_header{version = ?DIAMETER_VERSION}); + +make_prepare_header(#diameter_header{} = Hdr) -> Hdr; -make_request_header(T) -> +make_prepare_header(T) -> ?ERROR({invalid_header, T}). %% make_request_packet/2 @@ -1375,7 +1499,7 @@ make_request_header(T) -> make_request_packet(Bin, _) when is_binary(Bin) -> - make_request_packet(Bin); + make_prepare_packet(false, Bin); make_request_packet(#diameter_packet{msg = [#diameter_header{} | _]} = Pkt, @@ -1387,7 +1511,7 @@ make_request_packet(#diameter_packet{msg = [#diameter_header{} | _]} %% This is primarily so that the end to end and hop by hop identifiers %% are retained. make_request_packet(#diameter_packet{header = Hdr} = Pkt, - #diameter_packet{header = Hdr0}) -> + #diameter_packet{header = Hdr0}) -> Pkt#diameter_packet{header = fold_record(Hdr0, Hdr)}; make_request_packet(Msg, Pkt) -> @@ -1400,16 +1524,16 @@ fold_record(undefined, R) -> fold_record(Rec, R) -> diameter_lib:fold_tuple(2, Rec, R). -%% send_request/7 +%% send_req/6 -send_request(Pkt, TPid, Caps, App, Opts, Caller, SvcName) -> +send_req(Pkt, {TPid, Caps, App}, Opts, Caller, SvcName, Fs) -> #diameter_app{alias = Alias, dictionary = Dict, module = ModX, options = [{answer_errors, AE} | _]} = App, - EPkt = encode(Dict, Pkt), + EPkt = encode(Dict, Pkt, Fs), #options{filter = Filter, timeout = Timeout} @@ -1490,6 +1614,13 @@ msg(#diameter_packet{msg = undefined, bin = Bin}) -> msg(#diameter_packet{msg = Msg}) -> Msg. +%% encode/3 + +encode(Dict, Pkt, Fs) -> + P = encode(Dict, Pkt), + eval_packet(P, Fs), + P. + %% encode/2 %% Note that prepare_request can return a diameter_packet containing @@ -1571,38 +1702,51 @@ send(Pid, Pkt) -> %% retransmit/4 -retransmit({TPid, Caps, #diameter_app{alias = Alias} = App}, - #request{app = Alias, - packet = Pkt} +retransmit({TPid, Caps, #diameter_app{alias = Alias} = App} = T, + #request{app = Alias, packet = Pkt0} = Req, SvcName, Timeout) -> - have_request(Pkt, TPid) %% Don't failover to a peer we've + have_request(Pkt0, TPid) %% Don't failover to a peer we've andalso ?THROW(timeout), %% already sent to. - case cb(App, prepare_retransmit, [Pkt, SvcName, {TPid, Caps}]) of - {send, P} -> - retransmit(make_request_packet(P, Pkt), TPid, Caps, Req, Timeout); - {discard, Reason} -> - ?THROW(Reason); - discard -> - ?THROW(discarded); - T -> - ?ERROR({invalid_return, prepare_retransmit, App, T}) - end. + #diameter_packet{header = Hdr0} = Pkt0, + Hdr = Hdr0#diameter_header{is_retransmitted = true}, + Pkt = Pkt0#diameter_packet{header = Hdr}, -%% retransmit/5 + resend_req(cb(App, prepare_retransmit, [Pkt, SvcName, {TPid, Caps}]), + T, + Req#request{packet = Pkt}, + Timeout, + []). -retransmit(Pkt, TPid, Caps, #request{dictionary = Dict} = Req, Timeout) -> - EPkt = encode(Dict, Pkt), +resend_req({send, P}, T, #request{packet = Pkt} = Req, Timeout, Fs) -> + retransmit(make_request_packet(P, Pkt), T, Req, Timeout, Fs); - NewReq = Req#request{transport = TPid, - packet = Pkt, - caps = Caps}, +resend_req({discard, Reason}, _, _, _, _) -> + ?THROW(Reason); - ?LOG(retransmission, NewReq), - TRef = send_request(TPid, EPkt, NewReq, Timeout), - {TRef, NewReq}. +resend_req(discard, _, _, _, _) -> + ?THROW(discarded); + +resend_req({eval_packet, RC, F}, T, Req, Timeout, Fs) -> + resend_req(RC, T, Req, Timeout, [F|Fs]); + +resend_req(T, {_, _, App}, _, _, _) -> + ?ERROR({invalid_return, prepare_retransmit, App, T}). + +%% retransmit/6 + +retransmit(Pkt, {TPid, Caps, _}, #request{dictionary = D} = Req0, Tmo, Fs) -> + EPkt = encode(D, Pkt, Fs), + + Req = Req0#request{transport = TPid, + packet = Pkt, + caps = Caps}, + + ?LOG(retransmission, Req), + TRef = send_request(TPid, EPkt, Req, Tmo), + {TRef, Req}. %% store_request/4 @@ -1674,10 +1818,13 @@ request_peer_down(TPid, S) -> %%% recv_request/3 %%% --------------------------------------------------------------------------- -recv_request(TPid, Pkt, {ConnT, SvcName, Apps}) -> +recv_request(TPid, Pkt, {ConnT, SvcName, Apps}) -> %% upgrade + recv_request(TPid, Pkt, {ConnT, SvcName, Apps, ?NOMASK}); + +recv_request(TPid, Pkt, {ConnT, SvcName, Apps, Mask}) -> try ets:lookup(ConnT, TPid) of [C] -> - recv_request(C, TPid, Pkt, SvcName, Apps); + recv_request(C, TPid, Pkt, SvcName, Apps, Mask); [] -> %% transport has gone down ok catch @@ -1687,7 +1834,12 @@ recv_request(TPid, Pkt, {ConnT, SvcName, Apps}) -> %% recv_request/5 -recv_request(#conn{apps = SApps, caps = Caps}, TPid, Pkt, SvcName, Apps) -> +recv_request(#conn{apps = SApps, caps = Caps}, + TPid, + Pkt, + SvcName, + Apps, + Mask) -> #diameter_caps{origin_host = {OH,_}, origin_realm = {OR,_}} = Caps, @@ -1699,6 +1851,7 @@ recv_request(#conn{apps = SApps, caps = Caps}, TPid, Pkt, SvcName, Apps) -> {SvcName, OH, OR}, TPid, Apps, + Mask, Caps, Pkt). @@ -1724,20 +1877,24 @@ keyfind([Key | Rest], Pos, L) -> T end. -%% recv_request/6 +%% recv_request/7 -recv_request({Id, Alias}, T, TPid, Apps, Caps, Pkt) -> +recv_request({Id, Alias}, T, TPid, Apps, Mask, Caps, Pkt) -> #diameter_app{dictionary = Dict} = A = find_app(Alias, Apps), - recv_request(T, {TPid, Caps}, A, diameter_codec:decode(Id, Dict, Pkt)); + recv_request(T, + {TPid, Caps}, + A, + Mask, + diameter_codec:decode(Id, Dict, Pkt)); %% Note that the decode is different depending on whether or not Id is %% ?APP_ID_RELAY. %% DIAMETER_APPLICATION_UNSUPPORTED 3007 %% A request was sent for an application that is not supported. -recv_request(false, T, TPid, _, _, Pkt) -> +recv_request(false, T, TPid, _, _, _, Pkt) -> As = collect_avps(Pkt), protocol_error(3007, T, TPid, Pkt#diameter_packet{avps = As}). @@ -1749,7 +1906,7 @@ collect_avps(Pkt) -> As end. -%% recv_request/4 +%% recv_request/5 %% Wrong number of bits somewhere in the message: reply. %% @@ -1758,7 +1915,7 @@ collect_avps(Pkt) -> %% set to an unrecognized value, or that is inconsistent with the %% AVP's definition. %% -recv_request(T, {TPid, _}, _, #diameter_packet{errors = [Bs | _]} = Pkt) +recv_request(T, {TPid, _}, _, _, #diameter_packet{errors = [Bs | _]} = Pkt) when is_bitstring(Bs) -> protocol_error(3009, T, TPid, Pkt); @@ -1773,6 +1930,7 @@ recv_request(T, {TPid, _}, _, #diameter_packet{errors = [Bs | _]} = Pkt) recv_request(T, {TPid, _}, #diameter_app{id = Id}, + _, #diameter_packet{header = #diameter_header{is_proxiable = P}, msg = M} = Pkt) @@ -1790,6 +1948,7 @@ recv_request(T, recv_request(T, {TPid, _}, _, + _, #diameter_packet{header = #diameter_header{is_error = true}} = Pkt) -> protocol_error(3008, T, TPid, Pkt); @@ -1798,14 +1957,20 @@ recv_request(T, %% in the relay application. Don't distinguish between the two since %% each application has its own callback config. That is, the user can %% easily distinguish between the two cases. -recv_request(T, TC, App, Pkt) -> - request_cb(T, TC, App, examine(Pkt)). +recv_request(T, TC, App, Mask, Pkt) -> + request_cb(T, TC, App, Mask, examine(Pkt)). %% Note that there may still be errors but these aren't protocol %% (3xxx) errors that lead to an answer-message. -request_cb({SvcName, _OH, _OR} = T, TC, App, Pkt) -> - request_cb(cb(App, handle_request, [Pkt, SvcName, TC]), App, T, TC, Pkt). +request_cb({SvcName, _OH, _OR} = T, TC, App, Mask, Pkt) -> + request_cb(cb(App, handle_request, [Pkt, SvcName, TC]), + App, + Mask, + T, + TC, + [], + Pkt). %% examine/1 %% @@ -1825,7 +1990,7 @@ examine(#diameter_packet{errors = Es} = Pkt) -> Pkt#diameter_packet{errors = [5011 | Es]}. %% It's odd/unfortunate that this isn't a protocol error. -%% request_cb/5 +%% request_cb/7 %% A reply may be an answer-message, constructed either here or by %% the handle_request callback. The header from the incoming request @@ -1835,21 +2000,23 @@ examine(#diameter_packet{errors = Es} = Pkt) -> request_cb({reply, Ans}, #diameter_app{dictionary = Dict}, _, + _, {TPid, _}, + Fs, Pkt) -> - reply(Ans, Dict, TPid, Pkt); + reply(Ans, Dict, TPid, Fs, Pkt); %% An 3xxx result code, for which the E-bit is set in the header. -request_cb({protocol_error, RC}, _, T, {TPid, _}, Pkt) +request_cb({protocol_error, RC}, _, _, T, {TPid, _}, Fs, Pkt) when 3000 =< RC, RC < 4000 -> - protocol_error(RC, T, TPid, Pkt); + protocol_error(RC, T, TPid, Fs, Pkt); %% RFC 3588 says we must reply 3001 to anything unrecognized or %% unsupported. 'noreply' is undocumented (and inappropriately named) %% backwards compatibility for this, protocol_error the documented %% alternative. -request_cb(noreply, _, T, {TPid, _}, Pkt) -> - protocol_error(3001, T, TPid, Pkt); +request_cb(noreply, _, _, T, {TPid, _}, Fs, Pkt) -> + protocol_error(3001, T, TPid, Fs, Pkt); %% Relay a request to another peer. This is equivalent to doing an %% explicit call/4 with the message in question except that (1) a loop @@ -1869,38 +2036,51 @@ request_cb(noreply, _, T, {TPid, _}, Pkt) -> request_cb({A, Opts}, #diameter_app{id = Id} = App, + Mask, T, TC, + Fs, Pkt) when A == relay, Id == ?APP_ID_RELAY; A == proxy, Id /= ?APP_ID_RELAY; A == resend -> - resend(Opts, App, T, TC, Pkt); + resend(Opts, App, Mask, T, TC, Fs, Pkt); -request_cb(discard, _, _, _, _) -> +request_cb(discard, _, _, _, _, _, _) -> ok; -request_cb({eval, RC, F}, App, T, TC, Pkt) -> - request_cb(RC, App, T, TC, Pkt), +request_cb({eval_packet, RC, F}, App, Mask, T, TC, Fs, Pkt) -> + request_cb(RC, App, Mask, T, TC, [F|Fs], Pkt); + +request_cb({eval, RC, F}, App, Mask, T, TC, Fs, Pkt) -> + request_cb(RC, App, Mask, T, TC, Pkt, Fs), diameter_lib:eval(F). -%% protocol_error/4 +%% protocol_error/5 -protocol_error(RC, {_, OH, OR}, TPid, #diameter_packet{avps = Avps} = Pkt) -> +protocol_error(RC, {_, OH, OR}, TPid, Fs, Pkt) -> + #diameter_packet{avps = Avps} = Pkt, ?LOG({error, RC}, Pkt), - reply(answer_message({OH, OR, RC}, Avps), ?BASE, TPid, Pkt). + reply(answer_message({OH, OR, RC}, Avps), ?BASE, TPid, Fs, Pkt). -%% resend/5 +%% protocol_error/4 + +protocol_error(RC, T, TPid, Pkt) -> + protocol_error(RC, T, TPid, [], Pkt). + +%% resend/7 %% %% Resend a message as a relay or proxy agent. resend(Opts, #diameter_app{} = App, + Mask, {_SvcName, OH, _OR} = T, {_TPid, _Caps} = TC, + Fs, #diameter_packet{avps = Avps} = Pkt) -> {Code, _Flags, Vid} = ?BASE:avp_header('Route-Record'), - resend(is_loop(Code, Vid, OH, Avps), Opts, App, T, TC, Pkt). + resend(is_loop(Code, Vid, OH, Avps), Opts, App, Mask, T, TC, Fs, Pkt). %% DIAMETER_LOOP_DETECTED 3005 %% An agent detected a loop while trying to get the message to the @@ -1908,8 +2088,8 @@ resend(Opts, %% if one is available, but the peer reporting the error has %% identified a configuration problem. -resend(true, _, _, T, {TPid, _}, Pkt) -> %% Route-Record loop - protocol_error(3005, T, TPid, Pkt); +resend(true, _, _, _, T, {TPid, _}, Fs, Pkt) -> %% Route-Record loop + protocol_error(3005, T, TPid, Fs, Pkt); %% 6.1.8. Relaying and Proxying Requests %% @@ -1920,16 +2100,18 @@ resend(true, _, _, T, {TPid, _}, Pkt) -> %% Route-Record loop resend(false, Opts, App, + Mask, {SvcName, _, _} = T, {TPid, #diameter_caps{origin_host = {_, OH}}}, + Fs, #diameter_packet{header = Hdr0, avps = Avps} = Pkt) -> Route = #diameter_avp{data = {?BASE, 'Route-Record', OH}}, - Seq = diameter_session:sequence(), + Seq = diameter_session:sequence(Mask), Hdr = Hdr0#diameter_header{hop_by_hop_id = Seq}, Msg = [Hdr, Route | Avps], - resend(call(SvcName, App, Msg, Opts), T, TPid, Pkt). + resend(call(SvcName, App, Msg, Opts), T, TPid, Fs, Pkt). %% The incoming request is relayed with the addition of a %% Route-Record. Note the requirement on the return from call/4 below, %% which places a requirement on the value returned by the @@ -1955,15 +2137,18 @@ resend(#diameter_packet{bin = B} = Pkt, _, TPid, + Fs, #diameter_packet{header = #diameter_header{hop_by_hop_id = Id}, transport_data = TD}) -> - send(TPid, Pkt#diameter_packet{bin = diameter_codec:hop_by_hop_id(Id, B), - transport_data = TD}); + P = Pkt#diameter_packet{bin = diameter_codec:hop_by_hop_id(Id, B), + transport_data = TD}, + eval_packet(P, Fs), + send(TPid, P); %% TODO: counters %% Or not: DIAMETER_UNABLE_TO_DELIVER. -resend(_, T, TPid, Pkt) -> - protocol_error(3002, T, TPid, Pkt). +resend(_, T, TPid, Fs, Pkt) -> + protocol_error(3002, T, TPid, Fs, Pkt). %% is_loop/4 %% @@ -1985,52 +2170,68 @@ is_loop(Code, Vid, OH, [_ | Avps]) is_loop(Code, Vid, OH, Avps) -> is_loop(Code, Vid, ?BASE:avp(encode, OH, 'Route-Record'), Avps). -%% reply/4 +%% reply/5 %% %% Send a locally originating reply. %% Skip the setting of Result-Code and Failed-AVP's below. -reply([Msg], Dict, TPid, Pkt) +reply([Msg], Dict, TPid, Fs, Pkt) when is_list(Msg); is_tuple(Msg) -> - reply(Msg, Dict, TPid, Pkt#diameter_packet{errors = []}); + reply(Msg, Dict, TPid, Fs, Pkt#diameter_packet{errors = []}); %% No errors or a diameter_header/avp list. -reply(Msg, Dict, TPid, #diameter_packet{errors = Es, - transport_data = TD} - = ReqPkt) +reply(Msg, Dict, TPid, Fs, #diameter_packet{errors = Es} = ReqPkt) when [] == Es; is_record(hd(Msg), diameter_header) -> Pkt = diameter_codec:encode(Dict, make_answer_packet(Msg, ReqPkt)), + eval_packet(Pkt, Fs), incr(send, Pkt, Dict, TPid), %% count result codes in sent answers - send(TPid, Pkt#diameter_packet{transport_data = TD}); + send(TPid, Pkt); %% Or not: set Result-Code and Failed-AVP AVP's. -reply(Msg, Dict, TPid, #diameter_packet{errors = [H|_] = Es} = Pkt) -> +reply(Msg, Dict, TPid, Fs, #diameter_packet{errors = [H|_] = Es} = Pkt) -> reply(rc(Msg, rc(H), [A || {_,A} <- Es], Dict), Dict, TPid, + Fs, Pkt#diameter_packet{errors = []}). +eval_packet(Pkt, Fs) -> + lists:foreach(fun(F) -> diameter_lib:eval([F,Pkt]) end, Fs). + %% make_answer_packet/2 +%% A reply message clears the R and T flags and retains the P flag. +%% The E flag will be set at encode. 6.2 of 3588 requires the same P +%% flag on an answer as on the request. A #diameter_packet{} returned +%% from a handle_request callback can circumvent this by setting its +%% own header values. +make_answer_packet(#diameter_packet{header = Hdr, + msg = Msg, + transport_data = TD}, + #diameter_packet{header = ReqHdr}) -> + Hdr0 = ReqHdr#diameter_header{version = ?DIAMETER_VERSION, + is_request = false, + is_error = undefined, + is_retransmitted = false}, + #diameter_packet{header = fold_record(Hdr0, Hdr), + msg = Msg, + transport_data = TD}; + %% Binaries and header/avp lists are sent as-is. -make_answer_packet(Bin, _) +make_answer_packet(Bin, #diameter_packet{transport_data = TD}) when is_binary(Bin) -> - #diameter_packet{bin = Bin}; -make_answer_packet([#diameter_header{} | _] = Msg, _) -> - #diameter_packet{msg = Msg}; - -%% Otherwise a reply message clears the R and T flags and retains the -%% P flag. The E flag will be set at encode. 6.2 of 3588 requires the -%% same P flag on an answer as on the request. -make_answer_packet(Msg, #diameter_packet{header = ReqHdr}) -> - Hdr = ReqHdr#diameter_header{version = ?DIAMETER_VERSION, - is_request = false, - is_error = undefined, - is_retransmitted = false}, - #diameter_packet{header = Hdr, - msg = Msg}. + #diameter_packet{bin = Bin, + transport_data = TD}; +make_answer_packet([#diameter_header{} | _] = Msg, + #diameter_packet{transport_data = TD}) -> + #diameter_packet{msg = Msg, + transport_data = TD}; + +%% Otherwise, preserve transport_data. +make_answer_packet(Msg, #diameter_packet{transport_data = TD} = Pkt) -> + make_answer_packet(#diameter_packet{msg = Msg, transport_data = TD}, Pkt). %% rc/1 @@ -2071,7 +2272,7 @@ rc([MsgName | _], {'Result-Code' = K, RC} = T, Dict) -> rc(Rec, T, Dict) -> rc([Dict:rec2msg(element(1, Rec))], T, Dict). - + %% failed_avp/3 failed_avp(_, [] = No, _) -> @@ -2307,7 +2508,7 @@ a(#diameter_packet{errors = Es} = Pkt, SvcName, AE, #request{transport = TPid, when [] == Es; callback == AE -> cb(Req, handle_answer, [Pkt, msg(P), SvcName, {TPid, Caps}]); - + a(Pkt, SvcName, report, Req) -> x(errors, handle_answer, [SvcName, Req, Pkt]); @@ -2469,7 +2670,7 @@ send_event(#diameter_event{service = SvcName} = E) -> %%% # share_peer/5 %%% --------------------------------------------------------------------------- -share_peer(up, Caps, Aliases, TPid, #state{share_peers = true, +share_peer(up, Caps, Aliases, TPid, #state{options = [_, {_, true} | _], service_name = Svc}) -> diameter_peer:notify(Svc, {peer, TPid, Aliases, Caps}); @@ -2480,11 +2681,11 @@ share_peer(_, _, _, _, _) -> %%% # share_peers/2 %%% --------------------------------------------------------------------------- -share_peers(Pid, #state{share_peers = true, +share_peers(Pid, #state{options = [_, {_, true} | _], local_peers = PDict}) -> ?Dict:fold(fun(A,Ps,ok) -> sp(Pid, A, Ps), ok end, ok, PDict); -share_peers(_, #state{share_peers = false}) -> +share_peers(_, _) -> ok. sp(Pid, Alias, Peers) -> @@ -2494,39 +2695,31 @@ sp(Pid, Alias, Peers) -> %%% # remote_peer_up/4 %%% --------------------------------------------------------------------------- -remote_peer_up(Pid, Aliases, Caps, #state{use_shared_peers = true, +remote_peer_up(Pid, Aliases, Caps, #state{options = [_, _, {_, true} | _], service = Svc, - shared_peers = PDict} - = S) -> + shared_peers = PDict}) -> #diameter_service{applications = Apps} = Svc, - Update = lists:filter(fun(A) -> - lists:keymember(A, #diameter_app.alias, Apps) - end, - Aliases), - S#state{shared_peers = rpu(Pid, Caps, PDict, Update)}; + Key = #diameter_app.alias, + As = lists:filter(fun(A) -> lists:keymember(A, Key, Apps) end, Aliases), + rpu(Pid, Caps, PDict, As); -remote_peer_up(_, _, _, #state{use_shared_peers = false} = S) -> - S. +remote_peer_up(_, _, _, #state{options = [_, _, {_, false} | _]}) -> + ok. rpu(_, _, PDict, []) -> PDict; rpu(Pid, Caps, PDict, Aliases) -> erlang:monitor(process, Pid), T = {Pid, Caps}, - lists:foldl(fun(A,D) -> ?Dict:append(A, T, D) end, - PDict, - Aliases). + lists:foreach(fun(A) -> ?Dict:append(A, T, PDict) end, Aliases). %%% --------------------------------------------------------------------------- %%% # remote_peer_down/2 %%% --------------------------------------------------------------------------- -remote_peer_down(Pid, #state{use_shared_peers = true, - shared_peers = PDict} - = S) -> - S#state{shared_peers = lists:foldl(fun(A,D) -> rpd(Pid, A, D) end, - PDict, - ?Dict:fetch_keys(PDict))}. +remote_peer_down(Pid, #state{options = [_, _, {_, true} | _], + shared_peers = PDict}) -> + lists:foreach(fun(A) -> rpd(Pid, A, PDict) end, ?Dict:fetch_keys(PDict)). rpd(Pid, Alias, PDict) -> ?Dict:update(Alias, fun(Ps) -> lists:keydelete(Pid, 1, Ps) end, PDict). @@ -2851,7 +3044,8 @@ transports(#state{peerT = PeerT}) -> -define(ALL_INFO, [capabilities, applications, transport, - pending]). + pending, + options]). %% The rest. -define(OTHER_INFO, [connections, @@ -2878,6 +3072,19 @@ tagged_info(Item, S) undefined end; +tagged_info(TPid, #state{peerT = PT, connT = CT}) + when is_pid(TPid) -> + try + [#conn{peer = Pid}] = ets:lookup(CT, TPid), + [#peer{ref = Ref, type = Type, options = Opts}] = ets:lookup(PT, Pid), + [{ref, Ref}, + {type, Type}, + {options, Opts}] + catch + error:_ -> + [] + end; + tagged_info(Items, S) when is_list(Items) -> [T || I <- Items, T <- [tagged_info(I,S)], T /= undefined, T /= []]; @@ -2928,6 +3135,7 @@ complete_info(Item, #state{service = Svc} = S) -> capabilities -> service_info(?CAP_INFO, S); applications -> info_apps(S); transport -> info_transport(S); + options -> info_options(S); pending -> info_pending(S); keys -> ?ALL_INFO ++ ?CAP_INFO ++ ?OTHER_INFO; all -> service_info(?ALL_INFO, S); @@ -2955,7 +3163,12 @@ info_stats(#state{peerT = PeerT}) -> MatchSpec = [{#peer{ref = '$1', conn = '$2', _ = '_'}, [{'is_pid', '$2'}], [['$1', '$2']]}], - diameter_stats:read(lists:append(ets:select(PeerT, MatchSpec))). + try ets:select(PeerT, MatchSpec) of + L -> + diameter_stats:read(lists:append(L)) + catch + error: badarg -> [] %% service has gone down + end. %% info_transport/1 %% @@ -3000,7 +3213,12 @@ transport([[{type, accept}, {options, Opts} | _] | _] = Ls) -> {accept, [lists:nthtail(2,L) || L <- Ls]}]. peer_dict(#state{peerT = PeerT, connT = ConnT}, Dict0) -> - ets:foldl(fun(T,A) -> peer_acc(ConnT, A, T) end, Dict0, PeerT). + try ets:tab2list(PeerT) of + L -> + lists:foldl(fun(T,A) -> peer_acc(ConnT, A, T) end, Dict0, L) + catch + error: badarg -> Dict0 %% service has gone down + end. peer_acc(ConnT, Acc, #peer{pid = Pid, type = Type, @@ -3019,7 +3237,11 @@ peer_acc(ConnT, Acc, #peer{pid = Pid, info_conn(ConnT, TPid, true) when is_pid(TPid) -> - info_conn(ets:lookup(ConnT, TPid)); + try ets:lookup(ConnT, TPid) of + T -> info_conn(T) + catch + error: badarg -> [] %% service has gone down + end; info_conn(_, _, _) -> []. @@ -3096,7 +3318,11 @@ info_pending(#state{} = S) -> {{transport, '$2'}}, {{from, '$3'}}]}}]}], - ets:select(?REQUEST_TABLE, MatchSpec). + try + ets:select(?REQUEST_TABLE, MatchSpec) + catch + error: badarg -> [] %% service has gone down + end. %% info_connections/1 %% @@ -3151,3 +3377,8 @@ peer_acc(Peer, {PeerD, RefD}) -> [{TPid, _}, [{origin_host, {_, OH}} | _]] = [proplists:get_value(K, Peer) || K <- [peer, caps]], {dict:append(OH, Peer, PeerD), dict:append(OH, TPid, RefD)}. + +%% info_options/1 + +info_options(S) -> + S#state.options. diff --git a/lib/diameter/src/base/diameter_session.erl b/lib/diameter/src/base/diameter_session.erl index 4c468f207c..3b236f109a 100644 --- a/lib/diameter/src/base/diameter_session.erl +++ b/lib/diameter/src/base/diameter_session.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2011. All Rights Reserved. +%% Copyright Ericsson AB 2010-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -20,6 +20,7 @@ -module(diameter_session). -export([sequence/0, + sequence/1, session_id/1, origin_state_id/0]). @@ -30,7 +31,7 @@ -define(INT32, 16#FFFFFFFF). %% --------------------------------------------------------------------------- -%% # sequence/0 +%% # sequence/0-1 %% %% Output: 32-bit %% --------------------------------------------------------------------------- @@ -77,6 +78,15 @@ sequence() -> Instr = {_Pos = 2, _Incr = 1, _Threshold = ?INT32, _SetVal = 0}, ets:update_counter(diameter_sequence, sequence, Instr). +-spec sequence(diameter:sequence()) + -> diameter:'Unsigned32'(). + +sequence({_,32}) -> + sequence(); + +sequence({H,N}) -> + (H bsl N) bor (sequence() band (1 bsl N - 1)). + %% --------------------------------------------------------------------------- %% # origin_state_id/0 %% --------------------------------------------------------------------------- diff --git a/lib/diameter/src/base/diameter_watchdog.erl b/lib/diameter/src/base/diameter_watchdog.erl index d7474e5c56..243ad0a986 100644 --- a/lib/diameter/src/base/diameter_watchdog.erl +++ b/lib/diameter/src/base/diameter_watchdog.erl @@ -43,20 +43,24 @@ -include("diameter_internal.hrl"). -define(DEFAULT_TW_INIT, 30000). %% RFC 3539 ch 3.4.1 +-define(NOMASK, {0,32}). %% default sequence mask -record(watchdog, {%% PCB - Peer Control Block; see RFC 3539, Appendix A status = initial :: initial | okay | suspect | down | reopen, - pending = false :: boolean(), + pending = false :: boolean(), %% DWA tw :: 6000..16#FFFFFFFF | {module(), atom(), list()}, %% {M,F,A} -> integer() >= 0 num_dwa = 0 :: -1 | non_neg_integer(), %% number of DWAs received during reopen %% end PCB - parent = self() :: pid(), - transport :: pid() | undefined, + parent = self() :: pid(), %% service process + transport :: pid() | undefined, %% peer_fsm process tref :: reference(), %% reference for current watchdog timer - message_data}). %% term passed into diameter_service with message + message_data, %% term passed into diameter_service with message + sequence :: diameter:sequence(), %% mask + restrict :: {diameter:restriction(), boolean()}, + shutdown = false :: boolean()}). %% start/2 %% @@ -118,12 +122,23 @@ make_state({T, Pid, {RecvData, random:seed(now()), putr(restart, {T, Opts, Svc}), %% save seeing it in trace putr(dwr, dwr(Caps)), %% + {_,_} = Mask = call(Pid, sequence), + Restrict = call(Pid, restriction), + Nodes = restrict_nodes(Restrict), #watchdog{parent = Pid, - transport = monitor(diameter_peer_fsm:start(T, Opts, Svc)), + transport = monitor(diameter_peer_fsm:start(T, + Opts, + {Mask, Nodes, Svc})), tw = proplists:get_value(watchdog_timer, Opts, ?DEFAULT_TW_INIT), - message_data = {RecvData, SvcName, Apps}}. + message_data = {RecvData, SvcName, Apps, Mask}, + sequence = Mask, + restrict = {Restrict, lists:member(node(), Nodes)}}. + +%% Retrieve the sequence mask from the parent from the parent, rather +%% than having it passed into init/1, for upgrade reasons: the call to +%% diameter_service:receive_message/3 passes back the mask. %% handle_call/3 @@ -137,7 +152,7 @@ handle_cast(_, State) -> %% handle_info/2 -handle_info(T, State) -> +handle_info(T, #watchdog{} = State) -> case transition(T, State) of ok -> {noreply, State}; @@ -148,7 +163,14 @@ handle_info(T, State) -> ?LOG(stop, T), event(State, State#watchdog{status = down}), {stop, {shutdown, T}, State} - end. + end; + +handle_info(T, S) -> + handle_info(T, upgrade(S)). + +upgrade(S) -> + #watchdog{} = list_to_tuple(tuple_to_list(S) + ++ [?NOMASK, {nodes, true}, false]). event(#watchdog{status = T}, #watchdog{status = T}) -> ok; @@ -205,9 +227,10 @@ transition({shutdown, Pid}, #watchdog{parent = Pid, down = S, %% sanity check stop; transition({shutdown = T, Pid}, #watchdog{parent = Pid, - transport = TPid}) -> + transport = TPid} + = S) -> TPid ! {T, self()}, - ok; + S#watchdog{shutdown = true}; %% Parent process has died, transition({'DOWN', _, process, Pid, _Reason}, @@ -241,9 +264,10 @@ transition({close, TPid, _Reason}, #watchdog{transport = TPid}) -> transition({open, TPid, Hosts, T} = Open, #watchdog{transport = TPid, status = initial, - parent = Pid} + parent = Pid, + restrict = {_, R}} = S) -> - case okay(getr(restart), Hosts) of + case okay(getr(restart), Hosts, R) of okay -> open(Pid, {TPid, T}), set_watchdog(S#watchdog{status = okay}); @@ -258,12 +282,15 @@ transition({open, TPid, Hosts, T} = Open, transition({open = P, TPid, _Hosts, T}, #watchdog{transport = TPid, + parent = Pid, status = down} = S) -> %% Store the info we need to notify the parent to reopen the %% connection after the requisite DWA's are received, at which - %% time we eraser(open). + %% time we eraser(open). The reopen message is a later addition, + %% to communicate the new capabilities as soon as they're known. putr(P, {TPid, T}), + Pid ! {reopen, self(), {TPid, T}}, set_watchdog(send_watchdog(S#watchdog{status = reopen, num_dwa = 0})); @@ -277,7 +304,10 @@ transition({open = P, TPid, _Hosts, T}, transition({'DOWN', _, process, TPid, _}, #watchdog{transport = TPid, - status = initial}) -> + status = S, + shutdown = D}) + when S == initial; + D -> stop; transition({'DOWN', _, process, TPid, _}, @@ -312,6 +342,15 @@ transition({state, Pid}, #watchdog{status = S}) -> %% =========================================================================== +%% Only call "upwards", to the parent service. +call(Pid, Req) -> + try + gen_server:call(Pid, Req, infinity) + catch + exit: Reason -> + exit({shutdown, {Req, Reason}}) + end. + monitor(Pid) -> erlang:monitor(process, Pid), Pid. @@ -325,26 +364,36 @@ getr(Key) -> eraser(Key) -> erase({?MODULE, Key}). -%% encode/1 +%% encode/2 -encode(Msg) -> - #diameter_packet{bin = Bin} = diameter_codec:encode(?BASE, Msg), +encode(Msg, Mask) -> + Seq = diameter_session:sequence(Mask), + Hdr = #diameter_header{version = ?DIAMETER_VERSION, + end_to_end_id = Seq, + hop_by_hop_id = Seq}, + Pkt = #diameter_packet{header = Hdr, + msg = Msg}, + #diameter_packet{bin = Bin} = diameter_codec:encode(?BASE, Pkt), Bin. -%% okay/2 +%% okay/3 -okay({{accept, Ref}, _, _}, Hosts) -> +okay({{accept, Ref}, _, _}, Hosts, Restrict) -> T = {?MODULE, connection, Ref, Hosts}, diameter_reg:add(T), - okay(diameter_reg:match(T)); + if Restrict -> + okay(diameter_reg:match(T)); + true -> + okay + end; %% Register before matching so that at least one of two registering -%% processes will match the other. (Which can't happen as long as -%% diameter_peer_fsm guarantees at most one open connection to the same -%% peer.) +%% processes will match the other. -okay({{connect, _}, _, _}, _) -> +okay({{connect, _}, _, _}, _, _) -> okay. +%% okay/2 + %% The peer hasn't been connected recently ... okay([{_,P}]) -> P = self(), %% assert @@ -400,9 +449,10 @@ close(#watchdog{parent = Pid}) -> %% send_watchdog/1 send_watchdog(#watchdog{pending = false, - transport = TPid} + transport = TPid, + sequence = Mask} = S) -> - TPid ! {send, encode(getr(dwr))}, + TPid ! {send, encode(getr(dwr), Mask)}, ?LOG(send, 'DWR'), S#watchdog{pending = true}. @@ -437,6 +487,14 @@ throwaway(S) -> throw({?MODULE, throwaway, S}). %% rcv/2 +%% +%% The lack of Hop-by-Hop and End-to-End Identifiers checks in a +%% received DWA is intentional. The purpose of the message is to +%% demonstrate life but a peer that consistently bungles it by sending +%% the wrong identifiers causes the connection to toggle between OPEN +%% and SUSPECT, with failover and failback as result, despite there +%% being no real problem with connectivity. Thus, relax and accept any +%% incoming DWA as being in response to an outgoing DWR. %% INITIAL Receive DWA Pending = FALSE %% Throwaway() INITIAL @@ -555,7 +613,7 @@ timeout(#watchdog{status = T, = S) when T == suspect; T == reopen, P, N < 0 -> - exit(TPid, shutdown), + exit(TPid, {shutdown, watchdog_timeout}), close(S), S#watchdog{status = down}; @@ -600,19 +658,40 @@ restart(#watchdog{transport = undefined} = S) -> restart(S) -> S. +%% restart/2 +%% %% Only restart the transport in the connecting case. For an accepting -%% transport, we've registered the peer connection when leaving state -%% initial and this is used by a new accepting process to realize that -%% it's actually in state down rather then initial when receiving -%% notification of an open connection. - -restart({{connect, _} = T, Opts, Svc}, #watchdog{parent = Pid} = S) -> +%% transport, there's no guarantee that an accepted connection in a +%% restarted transport if from the peer we've lost contact with so +%% have to be prepared for another watchdog to handle it. This is what +%% the diameter_reg registration in this module is for: the peer +%% connection is registered when leaving state initial and this is +%% used by a new accepting watchdog to realize that it's actually in +%% state down rather then initial when receiving notification of an +%% open connection. + +restart({{connect, _} = T, Opts, Svc}, #watchdog{parent = Pid, + sequence = Mask, + restrict = {R,_}} + = S) -> Pid ! {reconnect, self()}, - S#watchdog{transport = monitor(diameter_peer_fsm:start(T, Opts, Svc))}; + Nodes = restrict_nodes(R), + S#watchdog{transport = monitor(diameter_peer_fsm:start(T, + Opts, + {Mask, Nodes, Svc})), + restrict = {R, lists:member(node(), Nodes)}}; + +%% No restriction on the number of connections to the same peer: just +%% die. Note that a state machine never enters state REOPEN in this +%% case. +restart({{accept, _}, _, _}, #watchdog{restrict = {_, false}}) -> + stop; + +%% Otherwise hang around until told to die. restart({{accept, _}, _, _}, S) -> S. -%% Don't currently use Opts/Svc in the accept case but having them in -%% the process dictionary is helpful if the process dies unexpectedly. + +%% Don't currently use Opts/Svc in the accept case. %% dwr/1 @@ -622,3 +701,22 @@ dwr(#diameter_caps{origin_host = OH, ['DWR', {'Origin-Host', OH}, {'Origin-Realm', OR}, {'Origin-State-Id', OSI}]. + +%% restrict_nodes/1 + +restrict_nodes(false) -> + []; + +restrict_nodes(nodes) -> + [node() | nodes()]; + +restrict_nodes(node) -> + [node()]; + +restrict_nodes(Nodes) + when [] == Nodes; + is_atom(hd(Nodes)) -> + Nodes; + +restrict_nodes(F) -> + diameter_lib:eval(F). diff --git a/lib/diameter/test/Makefile b/lib/diameter/test/Makefile index e3a57553c1..866d135bd9 100644 --- a/lib/diameter/test/Makefile +++ b/lib/diameter/test/Makefile @@ -16,13 +16,8 @@ # # %CopyrightEnd% -ifeq ($(ERL_TOP),) -include $(DIAMETER_TOP)/make/target.mk -include $(DIAMETER_TOP)/make/$(TARGET)/rules.mk -else include $(ERL_TOP)/make/target.mk include $(ERL_TOP)/make/$(TARGET)/otp.mk -endif # ---------------------------------------------------- # Application version @@ -148,11 +143,7 @@ log: /%: % force sed -f release.sed $< > "$(RELSYSDIR)$@" -ifeq ($(ERL_TOP),) -include $(DIAMETER_TOP)/make/release_targets.mk -else include $(ERL_TOP)/make/otp_release_targets.mk -endif release_spec release_docs_spec: diff --git a/lib/diameter/test/diameter_compiler_SUITE.erl b/lib/diameter/test/diameter_compiler_SUITE.erl index 4b792b5426..79bf9d32db 100644 --- a/lib/diameter/test/diameter_compiler_SUITE.erl +++ b/lib/diameter/test/diameter_compiler_SUITE.erl @@ -31,8 +31,8 @@ %% testcases -export([format/1, format/2, replace/1, replace/2, - generate/1, generate/4, generate/0, - examples/1, examples/0]). + generate/1, generate/4, + examples/1]). -export([dict/0]). %% fake dictionary module @@ -339,7 +339,7 @@ %% =========================================================================== suite() -> - [{timetrap, {minutes, 2}}]. + [{timetrap, {minutes, 10}}]. all() -> [format, @@ -407,9 +407,6 @@ re({RE, Repl}, Bin) -> %% %% Ensure success when generating code and compiling. -generate() -> - [{timetrap, {seconds, 2*length(?REPLACE)}}]. - generate(Config) -> Bin = proplists:get_value(base, Config), Rs = lists:zip(?REPLACE, lists:seq(1, length(?REPLACE))), @@ -436,9 +433,6 @@ generate(Mods, Bin, N, Mode) -> %% %% Compile dictionaries extracted from various standards. -examples() -> - [{timetrap, {seconds, 3*length(?EXAMPLES)}}]. - examples(_Config) -> Dir = filename:join([code:lib_dir(diameter, examples), "dict"]), [D || D <- ?EXAMPLES, _ <- [examples(?S(D), Dir)]]. diff --git a/lib/diameter/test/diameter_dpr_SUITE.erl b/lib/diameter/test/diameter_dpr_SUITE.erl new file mode 100644 index 0000000000..9252650bf7 --- /dev/null +++ b/lib/diameter/test/diameter_dpr_SUITE.erl @@ -0,0 +1,196 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2012. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% +%% + +%% +%% Tests of the disconnect_cb configuration. +%% + +-module(diameter_dpr_SUITE). + +-export([suite/0, + all/0, + groups/0, + init_per_group/2, + end_per_group/2]). + +%% testcases +-export([start/1, + connect/1, + remove_transport/1, + stop_service/1, + check/1, + stop/1]). + +%% disconnect_cb +-export([disconnect/5]). + +-include("diameter.hrl"). + +%% =========================================================================== + +-define(util, diameter_util). + +-define(ADDR, {127,0,0,1}). + +-define(CLIENT, "CLIENT"). +-define(SERVER, "SERVER"). + +-define(DICT_COMMON, ?DIAMETER_DICT_COMMON). +-define(APP_ID, ?DICT_COMMON:id()). + +%% Config for diameter:start_service/2. +-define(SERVICE(Host), + [{'Origin-Host', Host}, + {'Origin-Realm', "erlang.org"}, + {'Host-IP-Address', [?ADDR]}, + {'Vendor-Id', hd(Host)}, %% match this in disconnect/5 + {'Product-Name', "OTP/diameter"}, + {'Acct-Application-Id', [?APP_ID]}, + {restrict_connections, false}, + {application, [{dictionary, ?DICT_COMMON}, + {module, #diameter_callback{_ = false}}]}]). + +%% Disconnect reasons that diameter passes as the first argument of a +%% function configured as disconnect_cb. +-define(REASONS, [transport, service, application]). + +%% Valid values for Disconnect-Cause. +-define(CAUSES, [0, rebooting, 1, busy, 2, goaway]). + +%% Establish one client connection for element of this list, +%% configured with disconnect/5 as disconnect_cb and returning the +%% specified value. +-define(RETURNS, + [[close, {dpr, [{cause, invalid}]}], [ignore, close], []] + ++ [[{dpr, [{timeout, 5000}, {cause, T}]}] || T <- ?CAUSES]). + +%% =========================================================================== + +suite() -> + [{timetrap, {seconds, 60}}]. + +all() -> + [{group, R} || R <- ?REASONS]. + +%% The group determines how transports are terminated: by remove_transport, +%% stop_service or application stop. +groups() -> + Ts = tc(), + [{R, [], Ts} || R <- ?REASONS]. + +init_per_group(Name, Config) -> + [{group, Name} | Config]. + +end_per_group(_, _) -> + ok. + +tc() -> + [start, connect, remove_transport, stop_service, check, stop]. + +%% =========================================================================== +%% start/stop testcases + +start(_Config) -> + ok = diameter:start(), + ok = diameter:start_service(?SERVER, ?SERVICE(?SERVER)), + ok = diameter:start_service(?CLIENT, ?SERVICE(?CLIENT)). + +connect(Config) -> + Pid = spawn(fun init/0), %% process for disconnect_cb to bang + Grp = group(Config), + LRef = ?util:listen(?SERVER, tcp), + Refs = [?util:connect(?CLIENT, tcp, LRef, opts(RCs, {Grp, Pid})) + || RCs <- ?RETURNS], + ?util:write_priv(Config, config, [Pid | Refs]). + +%% Remove all the client transports only in the transport group. +remove_transport(Config) -> + transport == group(Config) + andalso (ok = diameter:remove_transport(?CLIENT, true)). + +%% Stop the service only in the service group. +stop_service(Config) -> + service == group(Config) + andalso (ok = diameter:stop_service(?CLIENT)). + +%% Check for callbacks and stop the service. (Not the other way around +%% for the timing reason explained below.) +check(Config) -> + Grp = group(Config), + [Pid | Refs] = ?util:read_priv(Config, config), + Pid ! self(), %% ask for dictionary + Dict = receive {Pid, D} -> D end, %% get it + check(Refs, ?RETURNS, Grp, Dict). %% check for callbacks + +stop(_Config) -> + ok = diameter:stop(). + +%% Whether or not there are callbacks after diameter:stop() depends on +%% timing as long as the server runs on the same node: a server +%% transport could close the connection before the client has chance +%% to apply its callback. Therefore, just check that there haven't +%% been any callbacks yet. +check(_, _, application, Dict) -> + [] = dict:to_list(Dict); + +check([], [], _, _) -> + ok; + +check([Ref | Refs], CBs, Grp, Dict) -> + check1(Ref, hd(CBs), Grp, Dict), + check(Refs, tl(CBs), Grp, Dict). + +check1(Ref, [ignore | RCs], Reason, Dict) -> + check1(Ref, RCs, Reason, Dict); + +check1(Ref, [_|_], Reason, Dict) -> + {ok, Reason} = dict:find(Ref, Dict); %% callback with expected reason + +check1(Ref, [], _, Dict) -> + error = dict:find(Ref, Dict). %% no callback + +%% ---------------------------------------- + +group(Config) -> + {group, Grp} = lists:keyfind(group, 1, Config), + Grp. + +%% Configure the callback with the group name (= disconnect reason) as +%% extra argument. +opts(RCs, T) -> + [{disconnect_cb, {?MODULE, disconnect, [T, RC]}} || RC <- RCs]. + +%% Match the group name with the disconnect reason to ensure the +%% callback is being called as expected. +disconnect(Reason, Ref, Peer, {Reason, Pid}, RC) -> + io:format("disconnect: ~p ~p~n", [Ref, Reason]), + {_, #diameter_caps{vendor_id = {$C,$S}}} = Peer, + Pid ! {Reason, Ref}, + RC. + +init() -> + exit(recv(dict:new())). + +recv(Dict) -> + receive + Pid when is_pid(Pid) -> + Pid ! {self(), Dict}; + {Reason, Ref} -> + recv(dict:store(Ref, Reason, Dict)) + end. diff --git a/lib/diameter/test/diameter_failover_SUITE.erl b/lib/diameter/test/diameter_failover_SUITE.erl index ed31670031..bb820a8bf2 100644 --- a/lib/diameter/test/diameter_failover_SUITE.erl +++ b/lib/diameter/test/diameter_failover_SUITE.erl @@ -18,19 +18,19 @@ %% %% -%% Tests of traffic between six Diameter nodes in three realms, +%% Tests of traffic between seven Diameter nodes in four realms, %% connected as follows. %% -%% ----- SERVER1.REALM2 -%% / -%% / ----- SERVER2.REALM2 -%% | / -%% CLIENT.REALM1 ------ SERVER3.REALM2 -%% | \ -%% | \ -%% \ ---- SERVER1.REALM3 -%% \ -%% ----- SERVER2.REALM3 +%% ----- SERVER1.REALM2 ----- +%% / \ +%% / ----- SERVER2.REALM2 ----- \ +%% | / \ | +%% CLIENT.REALM1 ------ SERVER3.REALM2 ------ CLIENT.REALM4 +%% | \ / | +%% | \ / | +%% \ ---- SERVER1.REALM3 ----- / +%% \ / +%% ----- SERVER2.REALM3 ----- %% -module(diameter_failover_SUITE). @@ -44,12 +44,16 @@ connect/1, send_ok/1, send_nok/1, + send_discard_1/1, + send_discard_2/1, stop_services/1, stop/1]). %% diameter callbacks -export([pick_peer/4, prepare_request/3, + prepare_retransmit/3, + handle_error/4, handle_answer/4, handle_request/3]). @@ -62,14 +66,18 @@ -define(ADDR, {127,0,0,1}). --define(CLIENT, "CLIENT.REALM1"). +-define(CLIENT1, "CLIENT.REALM1"). +-define(CLIENT2, "CLIENT.REALM4"). -define(SERVER1, "SERVER1.REALM2"). -define(SERVER2, "SERVER2.REALM2"). -define(SERVER3, "SERVER3.REALM2"). -define(SERVER4, "SERVER1.REALM3"). -define(SERVER5, "SERVER2.REALM3"). --define(SERVICES, [?CLIENT, ?SERVER1, ?SERVER2, ?SERVER3, ?SERVER4, ?SERVER5]). +-define(IS_CLIENT(Svc), Svc == ?CLIENT1; Svc == ?CLIENT2). + +-define(CLIENTS, [?CLIENT1, ?CLIENT2]). +-define(SERVERS, [?SERVER1, ?SERVER2, ?SERVER3, ?SERVER4, ?SERVER5]). -define(DICT_COMMON, ?DIAMETER_DICT_COMMON). @@ -77,26 +85,27 @@ -define(APP_ID, ?DICT_COMMON:id()). %% Config for diameter:start_service/2. --define(SERVICE(Host, Dict), +-define(SERVICE(Host), [{'Origin-Host', Host}, {'Origin-Realm', realm(Host)}, {'Host-IP-Address', [?ADDR]}, {'Vendor-Id', 12345}, {'Product-Name', "OTP/diameter"}, - {'Acct-Application-Id', [Dict:id()]}, + {'Acct-Application-Id', [?APP_ID]}, {application, [{alias, ?APP_ALIAS}, - {dictionary, Dict}, + {dictionary, ?DICT_COMMON}, {module, #diameter_callback {peer_up = false, peer_down = false, - handle_error = false, - prepare_retransmit = false, default = ?MODULE}}, {answer_errors, callback}]}]). -define(SUCCESS, 2001). --define(LOGOUT, ?'DIAMETER_BASE_TERMINATION-CAUSE_DIAMETER_LOGOUT'). +%% Value of Termination-Cause determines client/server behaviour. +-define(LOGOUT, ?'DIAMETER_BASE_TERMINATION-CAUSE_DIAMETER_LOGOUT'). +-define(MOVED, ?'DIAMETER_BASE_TERMINATION-CAUSE_DIAMETER_USER_MOVED'). +-define(TIMEOUT, ?'DIAMETER_BASE_TERMINATION-CAUSE_DIAMETER_SESSION_TIMEOUT'). %% =========================================================================== @@ -109,6 +118,8 @@ all() -> connect, send_ok, send_nok, + send_discard_1, + send_discard_2, stop_services, stop]. @@ -119,19 +130,20 @@ start(_Config) -> ok = diameter:start(). start_services(_Config) -> - S = [server(N, ?DICT_COMMON) || N <- tl(?SERVICES)], - - ok = diameter:start_service(?CLIENT, ?SERVICE(?CLIENT, ?DICT_COMMON)), + Servers = [server(N) || N <- ?SERVERS], + [] = [T || C <- ?CLIENTS, + T <- [diameter:start_service(C, ?SERVICE(C))], + T /= ok], - {save_config, [{?CLIENT, S}]}. + {save_config, Servers}. connect(Config) -> - {_, Conns} = proplists:get_value(saved_config, Config), + {start_services, Servers} = proplists:get_value(saved_config, Config), - lists:foreach(fun({CN,Ss}) -> connect(CN, Ss) end, Conns). + lists:foreach(fun(C) -> connect(C, Servers) end, ?CLIENTS). stop_services(_Config) -> - [] = [{H,T} || H <- ?SERVICES, + [] = [{H,T} || H <- ?CLIENTS ++ ?SERVERS, T <- [diameter:stop_service(H)], T /= ok]. @@ -140,8 +152,8 @@ stop(_Config) -> %% ---------------------------------------- -server(Name, Dict) -> - ok = diameter:start_service(Name, ?SERVICE(Name, Dict)), +server(Name) -> + ok = diameter:start_service(Name, ?SERVICE(Name)), {Name, ?util:listen(Name, tcp)}. connect(Name, Refs) -> @@ -153,30 +165,39 @@ connect(Name, Refs) -> %% Send an STR and expect success after SERVER3 answers after a couple %% of failovers. send_ok(_Config) -> - Req = ['STR', {'Destination-Realm', realm(?SERVER1)}, - {'Termination-Cause', ?LOGOUT}, - {'Auth-Application-Id', ?APP_ID}], + Req = #diameter_base_STR{'Destination-Realm' = realm(?SERVER1), + 'Termination-Cause' = ?LOGOUT, + 'Auth-Application-Id' = ?APP_ID}, #diameter_base_STA{'Result-Code' = ?SUCCESS, 'Origin-Host' = ?SERVER3} - = call(Req, [{filter, realm}]). + = call(?CLIENT1, Req). %% Send an STR and expect failure when both servers fail. send_nok(_Config) -> - Req = ['STR', {'Destination-Realm', realm(?SERVER4)}, - {'Termination-Cause', ?LOGOUT}, - {'Auth-Application-Id', ?APP_ID}], - {error, failover} = call(Req, [{filter, realm}]). + Req = #diameter_base_STR{'Destination-Realm' = realm(?SERVER4), + 'Termination-Cause' = ?LOGOUT, + 'Auth-Application-Id' = ?APP_ID}, + {failover, ?LOGOUT} = call(?CLIENT1, Req). + +%% Send an STR and have prepare_retransmit discard it. +send_discard_1(_Config) -> + Req = #diameter_base_STR{'Destination-Realm' = realm(?SERVER1), + 'Termination-Cause' = ?TIMEOUT, + 'Auth-Application-Id' = ?APP_ID}, + {rejected, ?TIMEOUT} = call(?CLIENT2, Req). +send_discard_2(_Config) -> + Req = #diameter_base_STR{'Destination-Realm' = realm(?SERVER4), + 'Termination-Cause' = ?MOVED, + 'Auth-Application-Id' = ?APP_ID}, + {discarded, ?MOVED} = call(?CLIENT2, Req). %% =========================================================================== realm(Host) -> tl(lists:dropwhile(fun(C) -> C /= $. end, Host)). -call(Req, Opts) -> - diameter:call(?CLIENT, ?APP_ALIAS, Req, Opts). - -set([H|T], Vs) -> - [H | Vs ++ T]. +call(Svc, Req) -> + diameter:call(Svc, ?APP_ALIAS, Req, [{filter, realm}]). %% =========================================================================== %% diameter callbacks @@ -184,7 +205,8 @@ set([H|T], Vs) -> %% pick_peer/4 %% Choose a server other than SERVER3 or SERVER5 if possible. -pick_peer(Peers, _, ?CLIENT, _State) -> +pick_peer(Peers, _, Svc, _State) + when ?IS_CLIENT(Svc) -> case lists:partition(fun({_, #diameter_caps{origin_host = {_, OH}}}) -> OH /= ?SERVER3 andalso OH /= ?SERVER5 end, @@ -198,20 +220,41 @@ pick_peer(Peers, _, ?CLIENT, _State) -> %% prepare_request/3 -prepare_request(Pkt, ?CLIENT, {_Ref, Caps}) -> +prepare_request(Pkt, Svc, {_Ref, Caps}) + when ?IS_CLIENT(Svc) -> {send, prepare(Pkt, Caps)}. prepare(#diameter_packet{msg = Req}, Caps) -> #diameter_caps{origin_host = {OH, _}, origin_realm = {OR, _}} = Caps, - set(Req, [{'Session-Id', diameter:session_id(OH)}, - {'Origin-Host', OH}, - {'Origin-Realm', OR}]). + Req#diameter_base_STR{'Origin-Host' = OH, + 'Origin-Realm' = OR, + 'Session-Id' = diameter:session_id(OH)}. + +%% prepare_retransmit/3 + +prepare_retransmit(#diameter_packet{header = H} = P, Svc, {_,_}) + when ?IS_CLIENT(Svc) -> + #diameter_header{is_retransmitted = true} = H, %% assert + prepare(P). + +prepare(#diameter_packet{msg = M} = P) -> + case M#diameter_base_STR.'Termination-Cause' of + ?LOGOUT -> {send, P}; + ?MOVED -> discard; + ?TIMEOUT -> {discard, rejected} + end. + +%% handle_error/4 + +handle_error(Reason, Req, _, _) -> + {Reason, Req#diameter_base_STR.'Termination-Cause'}. %% handle_answer/4 -handle_answer(Pkt, _Req, ?CLIENT, _Peer) -> +handle_answer(Pkt, _Req, Svc, _Peer) + when ?IS_CLIENT(Svc) -> #diameter_packet{msg = Rec, errors = []} = Pkt, Rec. @@ -219,8 +262,8 @@ handle_answer(Pkt, _Req, ?CLIENT, _Peer) -> %% Only SERVER3 actually answers. handle_request(Pkt, ?SERVER3, {_, Caps}) -> - #diameter_packet{msg = #diameter_base_STR{'Session-Id' = SId, - 'Origin-Host' = ?CLIENT}} + #diameter_packet{header = #diameter_header{is_retransmitted = true}, + msg = #diameter_base_STR{'Session-Id' = SId}} = Pkt, #diameter_caps{origin_host = {OH, _}, origin_realm = {OR, _}} diff --git a/lib/diameter/test/diameter_traffic_SUITE.erl b/lib/diameter/test/diameter_traffic_SUITE.erl index 669918f757..c157b0e304 100644 --- a/lib/diameter/test/diameter_traffic_SUITE.erl +++ b/lib/diameter/test/diameter_traffic_SUITE.erl @@ -38,6 +38,7 @@ result_codes/1, send_ok/1, send_nok/1, + send_bad_answer/1, send_arbitrary/1, send_unknown/1, send_unknown_mandatory/1, @@ -81,11 +82,11 @@ %% diameter callbacks -export([peer_up/3, peer_down/3, - pick_peer/5, pick_peer/6, - prepare_request/4, prepare_request/5, - prepare_retransmit/4, - handle_answer/5, handle_answer/6, - handle_error/5, + pick_peer/6, pick_peer/7, + prepare_request/5, prepare_request/6, + prepare_retransmit/5, + handle_answer/6, handle_answer/7, + handle_error/6, handle_request/3]). -include("diameter.hrl"). @@ -108,10 +109,16 @@ -define(BASE, ?DIAMETER_DICT_COMMON). -define(ACCT, ?DIAMETER_DICT_ACCOUNTING). +%% Sequence mask for End-to-End and Hop-by-Hop identifiers. +-define(CLIENT_MASK, {1,26}). %% 1 in top 6 bits + %% Run tests cases in different encoding variants. Send outgoing %% messages as lists or records. -define(ENCODINGS, [list, record]). +%% Identifers for client connections. +-define(CONNECTIONS, [c1,c2,c3]). + %% Not really what we should be setting unless the message is sent in %% the common application but diameter doesn't care. -define(APP_ID, ?DIAMETER_APP_ID_COMMON). @@ -124,7 +131,8 @@ {'Vendor-Id', 12345}, {'Product-Name', "OTP/diameter"}, {'Auth-Application-Id', [?DIAMETER_APP_ID_COMMON]}, - {'Acct-Application-Id', [?DIAMETER_APP_ID_ACCOUNTING]} + {'Acct-Application-Id', [?DIAMETER_APP_ID_ACCOUNTING]}, + {restrict_connections, false} | [{application, [{dictionary, D}, {module, ?MODULE}, {answer_errors, callback}]} @@ -175,12 +183,14 @@ suite() -> all() -> [start, start_services, add_transports, result_codes] - ++ [{group, name([E]), P} || E <- ?ENCODINGS, P <- [[], [parallel]]] + ++ [{group, ?util:name([E,C]), P} || E <- ?ENCODINGS, + C <- ?CONNECTIONS, + P <- [[], [parallel]]] ++ [remove_transports, stop_services, stop]. groups() -> Ts = tc(), - [{name([E]), [], Ts} || E <- ?ENCODINGS]. + [{?util:name([E,C]), [], Ts} || E <- ?ENCODINGS, C <- ?CONNECTIONS]. init_per_group(Name, Config) -> [{group, Name} | Config]. @@ -199,6 +209,7 @@ end_per_testcase(_, _) -> tc() -> [send_ok, send_nok, + send_bad_answer, send_arbitrary, send_unknown, send_unknown_mandatory, @@ -244,16 +255,17 @@ start(_Config) -> start_services(_Config) -> ok = diameter:start_service(?SERVER, ?SERVICE(?SERVER)), - ok = diameter:start_service(?CLIENT, ?SERVICE(?CLIENT)). + ok = diameter:start_service(?CLIENT, [{sequence, ?CLIENT_MASK} + | ?SERVICE(?CLIENT)]). add_transports(Config) -> LRef = ?util:listen(?SERVER, tcp, [{capabilities_cb, fun capx/2}]), - CRef = ?util:connect(?CLIENT, tcp, LRef), - ?util:write_priv(Config, "transport", {LRef, CRef}). + Cs = [?util:connect(?CLIENT, tcp, LRef, [{id, C}]) || C <- ?CONNECTIONS], + ?util:write_priv(Config, "transport", [LRef | Cs]). remove_transports(Config) -> - {LRef, CRef} = ?util:read_priv(Config, "transport"), - ?util:disconnect(?CLIENT, CRef, ?SERVER, LRef). + [LRef | Cs] = ?util:read_priv(Config, "transport"), + [?util:disconnect(?CLIENT, C, ?SERVER, LRef) || C <- Cs]. stop_services(_Config) -> ok = diameter:stop_service(?CLIENT), @@ -298,6 +310,14 @@ send_nok(Config) -> #'diameter_base_answer-message'{'Result-Code' = ?INVALID_AVP_BITS} = call(Config, Req). +%% Send an accounting ACR that the server tries to answer with an +%% inappropriate header, resulting in no answer being sent and the +%% request timing out. +send_bad_answer(Config) -> + Req = ['ACR', {'Accounting-Record-Type', ?EVENT_RECORD}, + {'Accounting-Record-Number', 2}], + {error, timeout} = call(Config, Req). + %% Send an ASR with an arbitrary AVP and expect success and the same %% AVP in the reply. send_arbitrary(Config) -> @@ -539,11 +559,11 @@ call(Config, Req) -> call(Config, Req, Opts) -> Name = proplists:get_value(testcase, Config), - [Enc] = name(proplists:get_value(group, Config)), + [Encoding, Client] = ?util:name(proplists:get_value(group, Config)), diameter:call(?CLIENT, dict(Req), - req(Req, Enc), - [{extra, [Name]} | Opts]). + req(Req, Encoding), + [{extra, [Name, Client]} | Opts]). req(['ACR' = H | T], record) -> ?ACCT:'#new-'(?ACCT:msg2rec(H), T); @@ -579,17 +599,6 @@ set(Dict, E, FV, Rec) set(_, _, _, Rec) -> Rec. -%% Contruct and deconstruct names to work around group names being -%% restricted to atoms. (Not really used yet.) - -name(Names) - when is_list(Names) -> - ?A(string:join([?L(A) || A <- Names], ",")); - -name(A) - when is_atom(A) -> - [?A(S) || S <- string:tokens(?L(A), ",")]. - %% =========================================================================== %% diameter callbacks @@ -603,28 +612,40 @@ peer_up(_SvcName, _Peer, State) -> peer_down(_SvcName, _Peer, State) -> State. -%% pick_peer/5/6 +%% pick_peer/6-7 -pick_peer([Peer], _, ?CLIENT, _State, Name) +pick_peer(Peers, _, ?CLIENT, _State, Name, Id) when Name /= send_detach -> - {ok, Peer}. + find(Id, Peers). -pick_peer([_Peer], _, ?CLIENT, _State, send_nopeer, ?EXTRA) -> +pick_peer(_Peers, _, ?CLIENT, _State, send_nopeer, _, ?EXTRA) -> false; -pick_peer([Peer], _, ?CLIENT, _State, send_detach, {_,_}) -> - {ok, Peer}. +pick_peer(Peers, _, ?CLIENT, _State, send_detach, Id, {_,_}) -> + find(Id, Peers). -%% prepare_request/4/5 +find(Id, Peers) -> + [P] = [P || P <- Peers, id(Id, P)], + {ok, P}. -prepare_request(_Pkt, ?CLIENT, {_Ref, _Caps}, send_discard) -> +id(Id, {Pid, _Caps}) -> + [{ref, _}, {type, _}, {options, Opts} | _] + = diameter:service_info(?CLIENT, Pid), + lists:member({id, Id}, Opts). + +%% prepare_request/5-6 + +prepare_request(_Pkt, ?CLIENT, {_Ref, _Caps}, send_discard, _) -> {discard, unprepared}; -prepare_request(Pkt, ?CLIENT, {_Ref, Caps}, Name) -> +prepare_request(Pkt, ?CLIENT, {_Ref, Caps}, Name, _) -> {send, prepare(Pkt, Caps, Name)}. -prepare_request(Pkt, ?CLIENT, {_Ref, Caps}, send_detach, _) -> - {send, prepare(Pkt, Caps)}. +prepare_request(Pkt, ?CLIENT, {_Ref, Caps}, send_detach, _, _) -> + {eval_packet, {send, prepare(Pkt, Caps)}, [fun log/2, detach]}. + +log(#diameter_packet{} = P, T) -> + io:format("~p: ~p~n", [T,P]). prepare(Pkt, Caps, send_unsupported) -> Req = prepare(Pkt, Caps), @@ -707,25 +728,25 @@ prepare(#diameter_packet{msg = Req}, Caps) {'Destination-Realm', DR}, {'Auth-Application-Id', ?APP_ID}]). -%% prepare_retransmit/4 +%% prepare_retransmit/5 -prepare_retransmit(_Pkt, false, _Peer, _Name) -> +prepare_retransmit(_Pkt, false, _Peer, _Name, _Id) -> discard. -%% handle_answer/5/6 +%% handle_answer/6-7 -handle_answer(Pkt, Req, ?CLIENT, Peer, Name) -> +handle_answer(Pkt, Req, ?CLIENT, Peer, Name, _Id) -> answer(Pkt, Req, Peer, Name). -handle_answer(Pkt, _Req, ?CLIENT, _Peer, send_detach, {Pid, Ref}) -> +handle_answer(Pkt, _Req, ?CLIENT, _Peer, send_detach, _Id, {Pid, Ref}) -> Pid ! {Ref, Pkt}. answer(#diameter_packet{msg = Rec, errors = []}, _Req, _Peer, _) -> Rec. -%% handle_error/5 +%% handle_error/6 -handle_error(Reason, _Req, ?CLIENT, _Peer, _Name) -> +handle_error(Reason, _Req, ?CLIENT, _Peer, _Name, _Id) -> {error, Reason}. %% handle_request/3 @@ -733,12 +754,33 @@ handle_error(Reason, _Req, ?CLIENT, _Peer, _Name) -> %% Note that diameter will set Result-Code and Failed-AVPs if %% #diameter_packet.errors is non-null. -handle_request(#diameter_packet{msg = M}, ?SERVER, {_Ref, Caps}) -> +handle_request(#diameter_packet{header = H, msg = M}, ?SERVER, {_Ref, Caps}) -> + #diameter_header{end_to_end_id = EI, + hop_by_hop_id = HI} + = H, + {V,B} = ?CLIENT_MASK, + V = EI bsr B, %% assert + V = HI bsr B, %% request(M, Caps). request(#diameter_base_accounting_ACR{'Accounting-Record-Number' = 0}, _) -> - {protocol_error, ?INVALID_AVP_BITS}; + {eval_packet, {protocol_error, ?INVALID_AVP_BITS}, [fun log/2, invalid]}; + +request(#diameter_base_accounting_ACR{'Session-Id' = SId, + 'Accounting-Record-Type' = RT, + 'Accounting-Record-Number' = 2 = RN}, + #diameter_caps{origin_host = {OH, _}, + origin_realm = {OR, _}}) -> + Ans = ['ACA', {'Result-Code', ?SUCCESS}, + {'Session-Id', SId}, + {'Origin-Host', OH}, + {'Origin-Realm', OR}, + {'Accounting-Record-Type', RT}, + {'Accounting-Record-Number', RN}], + + {reply, #diameter_packet{header = #diameter_header{is_error = true},%% not + msg = Ans}}; request(#diameter_base_accounting_ACR{'Session-Id' = SId, 'Accounting-Record-Type' = RT, diff --git a/lib/diameter/test/diameter_util.erl b/lib/diameter/test/diameter_util.erl index 890d24f6f8..5af4ad9ba5 100644 --- a/lib/diameter/test/diameter_util.erl +++ b/lib/diameter/test/diameter_util.erl @@ -24,7 +24,8 @@ %% %% generic --export([consult/2, +-export([name/1, + consult/2, run/1, fold/3, foldl/3, @@ -45,6 +46,21 @@ -define(L, atom_to_list). + +%% --------------------------------------------------------------------------- +%% name/2 +%% +%% Contruct and deconstruct lists of atoms as atoms to work around +%% group names in common_test being restricted to atoms. + +name(Names) + when is_list(Names) -> + list_to_atom(string:join([atom_to_list(A) || A <- Names], ",")); + +name(A) + when is_atom(A) -> + [list_to_atom(S) || S <- string:tokens(atom_to_list(A), ",")]. + %% --------------------------------------------------------------------------- %% consult/2 %% diff --git a/lib/diameter/test/diameter_watchdog_SUITE.erl b/lib/diameter/test/diameter_watchdog_SUITE.erl index ff40326947..7ce09e93ca 100644 --- a/lib/diameter/test/diameter_watchdog_SUITE.erl +++ b/lib/diameter/test/diameter_watchdog_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2011. All Rights Reserved. +%% Copyright Ericsson AB 2010-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -30,11 +30,21 @@ end_per_suite/1]). %% testcases --export([reopen/1, reopen/4]). +-export([reopen/1, reopen/4, reopen/7]). --export([start/3, %% diameter_transport callback - id/1, %% jitter callback - run/1]). +-export([id/1, %% jitter callback + run1/1]). + +%% diameter_app callbacks +-export([peer_up/3, + peer_down/3]). + +%% gen_tcp-ish interface +-export([listen/2, + accept/1, + connect/3, + send/2, + setopts/2]). -include("diameter.hrl"). -include("diameter_ct.hrl"). @@ -43,33 +53,21 @@ -define(util, diameter_util). --define(BASE, diameter_gen_base_rfc3588). --define(APPL_ID, diameter_gen_base_rfc3588:id()). --define(SUCCESS, 2001). %% DIAMETER_SUCCESS - -%% Addresses for the local and remote diameter nodes. The values don't -%% matter since we're faking transport. --define(LOCALHOST, {127,0,0,1}). --define(REMOTEHOST, {10,0,0,1}). - --define(CAPS, #diameter_caps{origin_host = "node.innan.com", - origin_realm = "innan.com", - host_ip_address = [?LOCALHOST], - vendor_id = 1022, - product_name = "remote", - auth_application_id = [?APPL_ID]}). - --define(APPL, #diameter_app{alias = ?MODULE, - dictionary = ?BASE, - module = [?MODULE], - init_state = now(), - id = ?APPL_ID, - mutable = false}). - -%% Service record maintained by our faked service process. --define(SERVICE, #diameter_service{pid = self(), - capabilities = ?CAPS, - applications = [?APPL]}). +-define(BASE, ?DIAMETER_DICT_COMMON). +-define(REALM, "erlang.org"). +-define(ADDR, {127,0,0,1}). + +%% Config for diameter:start_service/2. +-define(SERVICE(Name), + [{'Origin-Host', Name ++ "." ++ ?REALM}, + {'Origin-Realm', ?REALM}, + {'Host-IP-Address', [?ADDR]}, + {'Vendor-Id', 42}, + {'Product-Name', "OTP/diameter"}, + {'Auth-Application-Id', [?DIAMETER_APP_ID_COMMON]}, + {application, [{alias, Name}, + {dictionary, ?BASE}, + {module, ?MODULE}]}]). %% Watchdog timer as a callback. -define(WD(T), {?MODULE, id, [T]}). @@ -82,28 +80,28 @@ F_ <- [fun(T__) -> T__ end, fun(T__) -> ?WD(T__) end]]]). -%% Transport types. --define(TRANSPORTS, [connect, accept]). +%% Watchdog timer of the misbehaving peer. +-define(PEER_WD, 10000). -%% Message over the transport interface. --define(TMSG(T), {diameter, T}). - -%% Receive a message within a specified time. --define(RECV(T, Timeout), - receive T -> now() - after Timeout -> ?ERROR({timeout, Timeout}) +%% Receive a watchdog event within a specified time. +-define(EVENT(T, Tmo), + receive #diameter_event{info = T} -> now() + after Tmo -> ?ERROR({timeout, Tmo}) end). -%% Receive a message in a given number of watchdogs, plus or minus +%% Receive an event in a given number of watchdogs, plus or minus %% half. Note that the call to now_diff assumes left to right %% evaluation order. --define(RECV(T, N, WdL, WdH), +-define(EVENT(T, N, WdL, WdH), [?ERROR({received, _Elapsed_, _LowerBound_, N, WdL}) || _UpperBound_ <- [(N)*(WdH) + (WdH) div 2], - _Elapsed_ <- [now_diff(now(), ?RECV(T, _UpperBound_))], + _Elapsed_ <- [now_diff(now(), ?EVENT(T, _UpperBound_))], _LowerBound_ <- [(N)*(WdL) - (WdL) div 2], _Elapsed_ =< _LowerBound_*1000]). +-define(EVENT(T, N, Wd), + ?EVENT(T, N, Wd, Wd)). + %% A timeout that ensures one watchdog. The ensure only one watchdog %% requires (Wd + 2000) + 1000 < 2*(Wd - 2000) ==> 7000 < Wd for the %% case with random jitter. @@ -112,7 +110,7 @@ %% =========================================================================== suite() -> - [{timetrap, {minutes, 6}}].%% enough for 11 watchdogs @ 30 sec plus jitter + [{timetrap, {minutes, 10}}].%% enough for 17 watchdogs @ 30 sec plus jitter all() -> [reopen]. @@ -134,52 +132,97 @@ end_per_suite(_Config) -> %% implement a transport process that plays the role of the peer %% Diameter node. +%reopen(_) -> +% reopen(connect, ?WD(10000), 1, 'DWR'); + reopen(_) -> - [] = ?util:run([{?MODULE, [run, [reopen, Wd, T, N, M]]} - || Wd <- ?WD_TIMERS, - T <- ?TRANSPORTS, - N <- [0,1,2], - M <- ['DWR', 'DWA', other]]). + [] = run([[reopen, T, Wd, N, M] + || Wd <- ?WD_TIMERS, %% watchdog_timer value + T <- [listen, connect], %% watchdog to test + N <- [0,1,2], %% DWR's to answer before ignoring + M <- ['DWR', 'DWA', 'RAA']]). %% how to induce failback -reopen(Wd, Type, N, What) -> - Ref = make_ref(), +reopen(Type, Wd, N, M) -> + Server = start_service(), + Client = start_service(), - %% The maker of transport processes. - TPid = start({N, Wd, What, Ref}), + %% The peer to the transport whose watchdog is tested is given a + %% long watchdog timeout so that it doesn't send DWR of its own. + {Node, Peer} = {{[], Wd}, {[{module, ?MODULE}], ?WD(?PEER_WD)}}, - %% Act like diameter_service and start the watchdog process, which - %% in turn starts a peer_fsm process, which in turn starts a - %% transport process by way of start/3. Messages received by the - %% testcase are those sent by diameter_watchdog to the service - %% process (= process starting the watchdog). - WPid1 = watchdog(Type, Ref, TPid, Wd), + {{LH,LW},{CH,CW}} = case Type of + listen -> {Node, Peer}; + connect -> {Peer, Node} + end, - %% Low/high watchdog timeouts. - WdL = jitter(Wd, -2000), - WdH = jitter(Wd, 2000), + LO = [{transport_module, diameter_tcp}, + {transport_config, LH ++ [{ip, ?ADDR}, {port, 0}]}, + {watchdog_timer, LW}], + + {ok, LRef} = diameter:add_transport(Server, {listen, LO}), + + [LP] = ?util:lport(tcp, LRef, 20), + + CO = [{transport_module, diameter_tcp}, + {transport_config, CH ++ [{ip, ?ADDR}, {port, 0}, + {raddr, ?ADDR}, {rport, LP}]}, + {watchdog_timer, CW}], + + %% Use a temporary process to ensure the connecting transport is + %% added only once events from the listening transport are + %% subscribed to. + Pid = spawn(fun() -> receive _ -> ok end end), + + [] = run([[reopen, Type, T, LRef, Pid, Wd, N, M] + || T <- [{listen, Server}, {connect, Client, CO}]]). + +%% start_service/1 + +start_service() -> + Name = hostname(), + ok = diameter:start_service(Name, [{monitor, self()} | ?SERVICE(Name)]), + Name. + +%% reopen/7 +reopen(Type, {listen = T, SvcName}, Ref, Pid, Wd, N, M) -> + diameter:subscribe(SvcName), + Pid ! ok, + recv(Type, T, SvcName, Ref, Wd, N, M); + +reopen(Type, {connect = T, SvcName, Opts}, _, Pid, Wd, N, M) -> + diameter:subscribe(SvcName), + MRef = erlang:monitor(process, Pid), + receive {'DOWN', MRef, process, _, _} -> ok end, + {ok, Ref} = diameter:add_transport(SvcName, {T, Opts}), + recv(Type, T, SvcName, Ref, Wd, N, M). + +%% recv/7 + +%% The watchdog to be tested. +recv(Type, Type, _SvcName, Ref, Wd, N, M) -> %% Connection should come up immediately as a consequence of %% starting the watchdog process. In the accepting case this %% results in a new watchdog on a transport waiting for a new %% connection. - ?RECV({connection_up, WPid1, _}, 1000), - WPid2 = case Type of - connect -> - WPid1; - accept -> - watchdog(Type, Ref, TPid, Wd) - end, + ?EVENT({watchdog, Ref, _, {initial, okay}, _}, 2000), + ?EVENT({up, Ref, _, _, #diameter_packet{}}, 0), + + %% Low/high watchdog timeouts. + WdL = jitter(Wd, -2000), + WdH = jitter(Wd, 2000), %% OKAY Timer expires & Failover() %% Pending SetWatchdog() SUSPECT %% - %% Since our transport is replying to N DWR's before becoming - %% silent, we should go down after N+2 watchdog_timer expirations: - %% that is, after the first unanswered DWR. Knowing the min/max - %% watchdog timeout values gives the time interval in which the - %% down message is expected. - ?RECV({connection_down, WPid1}, N+2, WdL, WdH), + %% The peer replies to N DWR's before becoming silent, we should + %% go down after N+2 watchdog_timer expirations: that is, after + %% the first unanswered DWR. Knowing the min/max watchdog timeout + %% values gives the time interval in which the event is expected. + + ?EVENT({watchdog, Ref, _, {okay, suspect}, _}, N+2, WdL, WdH), + ?EVENT({down, Ref, _, _}, 0), %% SUSPECT Receive DWA Pending = FALSE %% Failback() @@ -188,9 +231,11 @@ reopen(Wd, Type, N, What) -> %% SUSPECT Receive non-DWA Failback() %% SetWatchdog() OKAY %% - %% The transport receives a message before the expiry of another - %% watchdog to induce failback. - ?RECV({connection_up, WPid1}, WdH), + %% The peer sends a message before the expiry of another watchdog + %% to induce failback. + + ?EVENT({watchdog, Ref, _, {suspect, okay}, _}, WdH + 2000), + ?EVENT({up, Ref, _, _}, 0), %% OKAY Timer expires & SendWatchdog() %% !Pending SetWatchdog() @@ -199,30 +244,35 @@ reopen(Wd, Type, N, What) -> %% OKAY Timer expires & Failover() %% Pending SetWatchdog() SUSPECT %% - %% The transport is still not responding to watchdogs so the - %% connection should go back down after either one or two watchdog - %% expiries, depending on whether or not DWA restored the connection. - F = choose(What == 'DWA', 2, 1), - ?RECV({connection_down, WPid1}, F, WdL, WdH), + %% The peer is now ignoring all watchdogs so the connection goes + %% back down after either one or two watchdog expiries, depending + %% on whether or not DWA restored the connection. + + F = choose(M == 'DWA', 2, 1), + ?EVENT({watchdog, Ref, _, {okay, suspect}, _}, F, WdL, WdH), + ?EVENT({down, Ref, _, _}, 0), %% SUSPECT Timer expires CloseConnection() %% SetWatchdog() DOWN %% + %% Non-response brings the connection down after another timeout. + + ?EVENT({watchdog, Ref, _, {suspect, down}, _}, 1, WdL, WdH), + %% DOWN Timer expires AttemptOpen() %% SetWatchdog() DOWN %% - %% Our transport tells us when the fake connection is - %% reestablished, which should happen after another couple of - %% watchdog expiries, the first bringing the watchdog to state - %% DOWN, the second triggering an attempt to reopen the - %% connection. - ?RECV({reopen, Ref}, 2, WdL, WdH), - %% DOWN Connection up NumDWA = 0 %% SendWatchdog() %% SetWatchdog() %% Pending = TRUE REOPEN %% + %% The connection is reestablished after another timeout. + + recv_reopen(Type, Ref, WdL, WdH), + + %% REOPEN Receive non-DWA Throwaway() REOPEN + %% %% REOPEN Receive DWA & Pending = FALSE %% NumDWA < 2 NumDWA++ REOPEN %% @@ -230,312 +280,259 @@ reopen(Wd, Type, N, What) -> %% NumDWA == 2 NumDWA++ %% Failback() OKAY %% - %% Now the watchdog should require three received DWA's before - %% taking the connection back up. The first DWR is sent directly - %% after capabilities exchange so it should take no more than two - %% watchdog expiries. - ?RECV({connection_up, WPid2, _}, 2, WdL, WdH). + %% REOPEN Timer expires & SendWatchdog() + %% !Pending SetWatchdog() + %% Pending = TRUE REOPEN + %% + %% An exchange of 3 watchdogs (the first directly after + %% capabilities exchange) brings the connection back up. -%% =========================================================================== + ?EVENT({watchdog, Ref, _, {reopen, okay}, _}, 2, WdL, WdH), + ?EVENT({up, Ref, _, _, #diameter_packet{}}, 0), -%% Start the fake transport process. From diameter's point of view -%% it's started when diameter calls start/3. We start it before this -%% happens since we use the same fake transport each time diameter -%% calls start/3. The process lives and dies with the test case. -start(Config) -> - Pid = self(), - spawn(fun() -> loop(init(Pid, Config)) end). - -%% Transport start from diameter. This may be called multiple times -%% depending on the testcase. -start({Type, _Ref}, #diameter_service{}, Pid) -> - Ref = make_ref(), - MRef = erlang:monitor(process, Pid), - Pid ! {start, self(), Type, Ref}, - {Ref, TPid} = receive - {Ref, _} = T -> - T; - {'DOWN', MRef, process, _, _} = T -> - T - end, - erlang:demonitor(MRef, [flush]), - {ok, TPid}. + %% Non-response brings it down again. -%% id/1 + ?EVENT({watchdog, Ref, _, {okay, suspect}, _}, 2, WdL, WdH), + ?EVENT({down, Ref, _, _}, 0), + ?EVENT({watchdog, Ref, _, {suspect, down}, _}, 1, WdL, WdH), -id(T) -> - T. + %% Reestablish after another watchdog. -%% =========================================================================== + recv_reopen(Type, Ref, WdL, WdH), -choose(true, X, _) -> X; -choose(false, _, X) -> X. + %% REOPEN Timer expires & NumDWA = -1 + %% Pending & SetWatchdog() + %% NumDWA >= 0 REOPEN + %% + %% REOPEN Timer expires & CloseConnection() + %% Pending & SetWatchdog() + %% NumDWA < 0 DOWN + %% + %% Peer is now ignoring all watchdogs go down again after 2 + %% timeouts. -%% run/1 -%% -%% A more useful badmatch in case of failure. + ?EVENT({watchdog, Ref, _, {reopen, down}, _}, 2, WdL, WdH); -run([F|A]) -> - ok = try - apply(?MODULE, F, A), - ok - catch - E:R -> - {A, E, R, erlang:get_stacktrace()} - end. +%% The misbehaving peer. +recv(_, Type, SvcName, Ref, Wd, N, M) -> + %% First transport process. + ?EVENT({watchdog, Ref, _, {initial, okay}, _}, 1000), + ?EVENT({up, Ref, _, _, #diameter_packet{}}, 0), + reg(Type, Ref, SvcName, {SvcName, {Wd,N,M}}), + ?EVENT({watchdog, Ref, _, {okay, down}, _}, infinity), -%% now_diff/2 + %% Second transport process. + ?EVENT({watchdog, Ref, _, {_, reopen}, _}, infinity), + reg(Type, Ref, SvcName, 3), + ?EVENT({watchdog, Ref, _, {_, down}, _}, infinity), -now_diff(T1, T2) -> - timer:now_diff(T2, T1). + %% Third transport process. + ?EVENT({watchdog, Ref, _, {_, reopen}, _}, infinity), + reg(Type, Ref, SvcName, 0), + ?EVENT({watchdog, Ref, _, {_, down}, _}, infinity), -%% jitter/2 + ok. -jitter(?WD(T), _) -> - T; -jitter(T,D) -> - T+D. +%% recv_reopen/4 -%% watchdog/4 -%% -%% Fake the call from diameter_service. The watchdog process will send -%% messages to the calling "service" process so our tests are that the -%% watchdog responds as expected. - -watchdog(Type, Ref, TPid, Wd) -> - Opts = [{transport_module, ?MODULE}, - {transport_config, TPid}, - {watchdog_timer, Wd}], - {_MRef, Pid} = diameter_watchdog:start({Type, Ref}, - {false, Opts, false, ?SERVICE}), - Pid. +recv_reopen(connect, Ref, WdL, WdH) -> + ?EVENT({watchdog, Ref, _, {_, reopen}, _}, 1, WdL, WdH), + ?EVENT({reconnect, Ref, _}, 0); -%% =========================================================================== +recv_reopen(listen, Ref, _, _) -> + ?EVENT({watchdog, Ref, _, {_, reopen}, _}, 1, ?PEER_WD). -%% Transport process implmentation. Fakes reception of messages by -%% sending fakes to the parent (peer fsm) process that called start/3. - --record(transport, - {type, %% connect | accept | manager - parent, %% pid() of peer_fsm/ervice process - open = false, %% done with capabilities exchange? - config}).%% testcase-specific config - -%% init/2 - -%% Testcase starting the manager. -init(SvcPid, {_,_,_,_} = Config) -> - putr(peer, [{'Origin-Host', hostname() ++ ".utan.com"}, - {'Origin-Realm', "utan.com"}]), - #transport{type = manager, - parent = monitor(SvcPid), - config = Config}; - -%% Manager starting a transport. -init(_, {Type, ParentPid, SvcPid, TwinPid, Peer, {N,_,_,_} = Config}) -> - putr(peer, Peer), - putr(service, SvcPid), - putr(count, init(Type, ParentPid, TwinPid, N)),%% number of DWR's to answer - #transport{type = Type, - parent = monitor(ParentPid), - config = Config}. - -init(Type, ParentPid, undefined, N) -> - connected(ParentPid, Type), - N; -init(_, _, TPid, _) -> - monitor(TPid), - 3. - -monitor(Pid) -> - erlang:monitor(process, Pid), - Pid. +%% reg/4 +%% +%% Lookup the pid of the transport process and publish a term for +%% send/2 to lookup. +reg(Type, Ref, SvcName, T) -> + TPid = tpid(Type, Ref, diameter:service_info(SvcName, transport)), + true = diameter_reg:add_new({?MODULE, TPid, T}). + +%% tpid/3 + +tpid(connect, Ref, [[{ref, Ref}, + {type, connect}, + {options, _}, + {watchdog, _}, + {peer, _}, + {apps, _}, + {caps, _}, + {port, [{owner, TPid} | _]} + | _]]) -> + TPid; + +tpid(listen, Ref, [[{ref, Ref}, + {type, listen}, + {options, _}, + {accept, As} + | _]]) -> + [[{watchdog, _}, + {peer, _}, + {apps, _}, + {caps, _}, + {port, [{owner, TPid} | _]} + | _]] + = lists:filter(fun([{watchdog, {_,_,S}} | _]) -> + S == okay orelse S == reopen + end, + As), + TPid. -%% Generate a unique hostname for the faked peer. -hostname() -> - lists:flatten(io_lib:format("~p-~p-~p", tuple_to_list(now()))). +%% =========================================================================== -%% loop/1 - -loop(S) -> - loop(msg(receive T -> T end, S)). - -msg(T,S) -> - case transition(T,S) of - ok -> - S; - #transport{} = NS -> - NS; - {stop, Reason} -> - x(Reason) - end. - -x(Reason) -> - exit(Reason). - -%% transition/2 - -%% Manager is being asked for a new transport process. -transition({start, Pid, Type, Ref}, #transport{type = manager, - parent = SvcPid, - config = Config}) -> - TPid = start({Type, Pid, SvcPid, getr(transport), getr(peer), Config}), - Pid ! {Ref, TPid}, - putr(transport, TPid), +listen(PortNr, Opts) -> + gen_tcp:listen(PortNr, Opts). + +accept(LSock) -> + gen_tcp:accept(LSock). + +connect(Addr, Port, Opts) -> + gen_tcp:connect(Addr, Port, Opts). + +setopts(Sock, Opts) -> + inet:setopts(Sock, Opts). + +send(Sock, Bin) -> + send(getr(config), Sock, Bin). + +%% send/3 + +%% First outgoing message from a new transport process is CER/CEA. +%% Remaining outgoing messages are either DWR or DWA. +send(undefined, Sock, Bin) -> + putr(config, init), + gen_tcp:send(Sock, Bin); + +%% Outgoing DWR: fake reception of DWA. Use the fact that AVP values +%% are ignored. This is to ensure that the peer's watchdog state +%% transitions are only induced by responses to messages it sends. +send(_, Sock, <<_:32, 1:1, _:7, 280:24, _:32, EId:32, HId:32, _/binary>>) -> + Pkt = #diameter_packet{header = #diameter_header{version = 1, + end_to_end_id = EId, + hop_by_hop_id = HId}, + msg = ['DWA', {'Result-Code', 2001}, + {'Origin-Host', "XXX"}, + {'Origin-Realm', ?REALM}]}, + #diameter_packet{bin = Bin} = diameter_codec:encode(?BASE, Pkt), + self() ! {tcp, Sock, Bin}, ok; -%% Peer fsm or testcase process has died. -transition({'DOWN', _, process, Pid, _} = T, #transport{parent = Pid}) -> - {stop, T}; - -%% Twin transport process has gone down. In the connect case, the -%% transport isn't started until this happens in the first place so -%% connect immediately. In the accept case, fake the peer reconnecting -%% only after another watchdog expiry. -transition({'DOWN', _, process, _, _}, #transport{type = Type, - config = {_, Wd, _, _}}) -> - Tmo = case Type of - connect -> - 0; - accept -> - ?ONE_WD(Wd) - end, - erlang:send_after(Tmo, self(), reconnect), +%% First outgoing DWA. +send(init, Sock, Bin) -> + [{{?MODULE, _, T}, _}] = diameter_reg:wait({?MODULE, self(), '_'}), + putr(config, T), + send(Sock, Bin); + +%% First transport process. +send({SvcName, {_,_,_} = T}, Sock, Bin) -> + [{'Origin-Host', _} = OH, {'Origin-Realm', _} = OR | _] + = ?SERVICE(SvcName), + putr(origin, [OH, OR]), + putr(config, T), + send(Sock, Bin); + +%% Discard DWA, failback after another timeout in the peer. +send({Wd, 0 = No, Msg}, Sock, Bin) -> + Origin = getr(origin), + spawn(fun() -> failback(?ONE_WD(Wd), Msg, Sock, Bin, Origin) end), + putr(config, No), ok; -transition(reconnect, #transport{type = Type, - parent = Pid, - config = {_,_,_,Ref}}) -> - getr(service) ! {reopen, Ref}, - connected(Pid, Type), - ok; +%% Send DWA while we're in the mood (aka 0 < N). +send({Wd, N, Msg}, Sock, Bin) -> + putr(config, {Wd, N-1, Msg}), + gen_tcp:send(Sock, Bin); -%% Peer fsm process is sending CER: fake the peer's CEA. -transition(?TMSG({send, Bin}), #transport{type = connect, - open = false, - parent = Pid} - = S) -> - {Code, Flags, _} = ?BASE:msg_header('CER'), - <<_:32, Flags:8, Code:24, _:96, _/binary>> = Bin, - Hdr = make_header(Bin), - recv(Pid, {Hdr, make_cea()}), - S#transport{open = true}; - -%% Peer fsm process is sending CEA. -transition(?TMSG({send, Bin}), #transport{type = accept, - open = false} - = S) -> - {Code, Flags, _} = ?BASE:msg_header('CEA'), - <<_:32, Flags:8, Code:24, _:96, _/binary>> = Bin, - S#transport{open = true}; - -%% Watchdog is sending DWR or DWA. -transition(?TMSG({send, Bin}), #transport{open = true} = S) -> - {Code, _, _} = ?BASE:msg_header('DWR'), - {Code, _, _} = ?BASE:msg_header('DWA'), - <<_:32, R:1, 0:7, Code:24, _:96, _/binary>> = Bin, - Hdr = make_header(Bin), - dwa(1 == R, S, Hdr), +%% Discard DWA. +send(0, _Sock, _Bin) -> ok; -%% We're telling ourselves to fake a received message. -transition({recv, Msg}, #transport{parent = Pid}) -> - recv(Pid, Msg), - ok; +%% Send DWA. +send(N, Sock, <<_:32, 0:1, _:7, 280:24, _/binary>> = Bin) -> + putr(config, N-1), + gen_tcp:send(Sock, Bin). -%% We're telling ourselves to receive a message to induce failback. -transition(failback = T, #transport{parent = Pid}) -> - recv(Pid, eraser(T)), - ok. +failback(Tmo, Msg, Sock, Bin, Origin) -> + timer:sleep(Tmo), + ok = gen_tcp:send(Sock, msg(Msg, Bin, Origin)). -make_header(Bin) -> - #diameter_header{end_to_end_id = E, - hop_by_hop_id = H} - = diameter_codec:decode_header(Bin), - #diameter_header{end_to_end_id = E, - hop_by_hop_id = H}. - -recv(Pid, Msg) -> - Pid ! ?TMSG({recv, encode(Msg)}). - -%% Replace the end-to-end/hop-by-hop identifiers with those from an -%% incoming request to which we're constructing a reply. -encode({Hdr, [_|_] = Msg}) -> - #diameter_header{hop_by_hop_id = HBH, - end_to_end_id = E2E} - = Hdr, - #diameter_packet{bin = Bin} = diameter_codec:encode(?BASE, Msg), - <<H:12/binary, _:64, T/binary>> = Bin, - <<H/binary, HBH:32, E2E:32, T/binary>>; - -encode([_|_] = Msg) -> - #diameter_packet{bin = Bin} = diameter_codec:encode(?BASE, Msg), +%% msg/2 + +msg('DWA', Bin, _Origin) -> + Bin; +msg(Msg, _Bin, Origin) -> + #diameter_packet{bin = Bin} + = diameter_codec:encode(?BASE, msg(Msg, Origin)), Bin. -connected(Pid, connect) -> - Pid ! ?TMSG({self(), connected, make_ref()}); -connected(Pid, accept) -> - Pid ! ?TMSG({self(), connected}), - recv(Pid, make_cer()). +msg('DWR' = M, T) -> + [M | T]; -make_cer() -> - ['CER' | getr(peer)] ++ [{'Host-IP-Address', [?REMOTEHOST]}, - {'Vendor-Id', 1028}, - {'Product-Name', "Utan"}, - {'Auth-Application-Id', [?APPL_ID]}]. +msg('RAA', T) -> + ['RAA', {'Session-Id', diameter:session_id("abc")}, + {'Result-Code', 2001} + | T]. +%% An unexpected answer is discarded after passing through the +%% watchdog state machine. -make_cea() -> - ['CER' | Rest] = make_cer(), - ['CEA', {'Result-Code', ?SUCCESS} | Rest]. +%% =========================================================================== -make_dwr() -> - ['DWR' | getr(peer)]. +peer_up(_SvcName, _Peer, S) -> + S. -make_dwa() -> - ['DWR' | Rest] = make_dwr(), - ['DWA', {'Result-Code', ?SUCCESS} | Rest]. +peer_down(_SvcName, _Peer, S) -> + S. -dwa(false, _, _) -> %% outgoing was DWA ... - ok; -dwa(true, S, Hdr) -> %% ... or DWR - dwa(getr(count), Hdr, S); - -%% React to the DWR only after another watchdog expiry. We shouldn't -%% get another DWR while the answer is pending. -dwa(0, Hdr, #transport{config = {_, Wd, What, _}}) -> - erlang:send_after(?ONE_WD(Wd), self(), failback), - putr(failback, make_msg(What, Hdr)), - eraser(count); - -dwa(undefined, _, _) -> - undefined = getr(failback), %% ensure this is after failback - ok; +%% =========================================================================== -%% Reply with DWA. -dwa(N, Hdr, #transport{parent = Pid}) -> - putr(count, N-1), - recv(Pid, {Hdr, make_dwa()}). +choose(true, X, _) -> X; +choose(false, _, X) -> X. -%% Answer to received DWR. -make_msg('DWA', Hdr) -> - {Hdr, make_dwa()}; +%% id/1 +%% +%% Jitter callback. -%% DWR from peer. -make_msg('DWR', _) -> - make_dwr(); +id(T) -> + T. -%% An unexpected answer is discarded after passing through the -%% watchdog state machine. -make_msg(other, _) -> - ['RAA', {'Session-Id', diameter:session_id("abc")}, - {'Result-Code', 2001} - | getr(peer)]. +%% run/1 +%% +%% A more useful badmatch in case of failure. + +run(Fs) -> + ?util:run([{?MODULE, [run1, F]} || F <- Fs]). + +run1([F|A]) -> + ok = try + apply(?MODULE, F, A), + ok + catch + E:R -> + S = erlang:get_stacktrace(), + io:format("~p~n", [{A, E, R, S}]), + S + end. + +%% now_diff/2 + +now_diff(T1, T2) -> + timer:now_diff(T2, T1). + +%% jitter/2 + +jitter(?WD(T), _) -> + T; +jitter(T,D) -> + T+D. + +%% Generate a unique hostname for the faked peer. +hostname() -> + lists:flatten(io_lib:format("~p-~p-~p", tuple_to_list(now()))). putr(Key, Val) -> put({?MODULE, Key}, Val). getr(Key) -> get({?MODULE, Key}). - -eraser(Key) -> - erase({?MODULE, Key}). diff --git a/lib/diameter/test/modules.mk b/lib/diameter/test/modules.mk index 7f163536fb..5898e125ae 100644 --- a/lib/diameter/test/modules.mk +++ b/lib/diameter/test/modules.mk @@ -2,7 +2,7 @@ # %CopyrightBegin% # -# Copyright Ericsson AB 2010-2011. All Rights Reserved. +# Copyright Ericsson AB 2010-2012. All Rights Reserved. # # The contents of this file are subject to the Erlang Public License, # Version 1.1, (the "License"); you may not use this file except in @@ -39,7 +39,8 @@ MODULES = \ diameter_traffic_SUITE \ diameter_relay_SUITE \ diameter_tls_SUITE \ - diameter_failover_SUITE + diameter_failover_SUITE \ + diameter_dpr_SUITE HRL_FILES = \ diameter_ct.hrl diff --git a/lib/diameter/vsn.mk b/lib/diameter/vsn.mk index 48e6596e72..c9f74ffcec 100644 --- a/lib/diameter/vsn.mk +++ b/lib/diameter/vsn.mk @@ -18,7 +18,7 @@ # %CopyrightEnd% APPLICATION = diameter -DIAMETER_VSN = 1.2 +DIAMETER_VSN = 1.3 PRE_VSN = APP_VSN = "$(APPLICATION)-$(DIAMETER_VSN)$(PRE_VSN)" diff --git a/lib/edoc/doc/src/notes.xml b/lib/edoc/doc/src/notes.xml index e01a6d6675..472b3bfc34 100644 --- a/lib/edoc/doc/src/notes.xml +++ b/lib/edoc/doc/src/notes.xml @@ -4,7 +4,7 @@ <chapter> <header> <copyright> - <year>2007</year><year>2011</year> + <year>2007</year><year>2012</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> diff --git a/lib/eldap/src/Makefile b/lib/eldap/src/Makefile index 39a41d08e2..46fb805bcc 100644 --- a/lib/eldap/src/Makefile +++ b/lib/eldap/src/Makefile @@ -88,7 +88,7 @@ $(TARGET_FILES): $(HRL_FILES) # Special Build Targets # ---------------------------------------------------- $(ASN1_HRL): ../asn1/$(ASN1_FILES) - $(ERLC) -o $(EBIN) -bber_bin +optimize +nif $(ERL_COMPILE_FLAGS) ../asn1/ELDAPv3.asn1 + $(ERLC) -o $(EBIN) -bber $(ERL_COMPILE_FLAGS) ../asn1/ELDAPv3.asn1 # ---------------------------------------------------- # Release Target diff --git a/lib/eldap/src/eldap.erl b/lib/eldap/src/eldap.erl index 699dfc8791..b3249d4f56 100644 --- a/lib/eldap/src/eldap.erl +++ b/lib/eldap/src/eldap.erl @@ -700,20 +700,22 @@ recv_response(S, Data) -> Error -> throw(Error) end; {error,Reason} -> - throw({gen_tcp_error, Reason}); - Error -> - throw(Error) + throw({gen_tcp_error, Reason}) end. %%% Sanity check of received packet check_tag(Data) -> - case asn1rt_ber_bin:decode_tag(l2b(Data)) of - {_Tag, Data1, _Rb} -> - case asn1rt_ber_bin:decode_length(l2b(Data1)) of - {{_Len, _Data2}, _Rb2} -> ok; - _ -> throw({error,decoded_tag_length}) - end; - _ -> throw({error,decoded_tag}) + try + {_Tag, Data1, _Rb} = asn1rt_ber_bin:decode_tag(l2b(Data)), + try + {{_Len, _Data2}, _Rb2} = asn1rt_ber_bin:decode_length(l2b(Data1)), + ok + catch + _ -> throw({error,decoded_tag_length}) + end + catch + _ -> + throw({error, decoded_tag}) end. %%% Check for expected kind of reply diff --git a/lib/eldap/vsn.mk b/lib/eldap/vsn.mk index c9d6e4e324..4d05d3d1e3 100644 --- a/lib/eldap/vsn.mk +++ b/lib/eldap/vsn.mk @@ -1 +1 @@ -ELDAP_VSN = 1.0 +ELDAP_VSN = 1.0.1 diff --git a/lib/erl_docgen/doc/src/notes.xml b/lib/erl_docgen/doc/src/notes.xml index ee62de86b1..9775909d76 100644 --- a/lib/erl_docgen/doc/src/notes.xml +++ b/lib/erl_docgen/doc/src/notes.xml @@ -30,7 +30,23 @@ </header> <p>This document describes the changes made to the <em>erl_docgen</em> application.</p> - <section><title>Erl_Docgen 0.3.2</title> + <section><title>Erl_Docgen 0.3.3</title> + + <section><title>Improvements and New Features</title> + <list> + <item> + <p> A possibility to configure erl_docgen so it can + generate documentation for other products than + Erlang/OTP. </p> + <p> + Own Id: OTP-9040</p> + </item> + </list> + </section> + +</section> + +<section><title>Erl_Docgen 0.3.2</title> <section><title>Fixed Bugs and Malfunctions</title> <list> diff --git a/lib/erl_docgen/priv/xsl/Makefile b/lib/erl_docgen/priv/xsl/Makefile index 1510387d72..58589672b8 100644 --- a/lib/erl_docgen/priv/xsl/Makefile +++ b/lib/erl_docgen/priv/xsl/Makefile @@ -42,7 +42,8 @@ XSL_FILES = \ db_pdf_params.xsl \ db_html.xsl \ db_html_params.xsl \ - db_man.xsl + db_man.xsl \ + db_eix.xsl # ---------------------------------------------------- diff --git a/lib/erl_docgen/priv/xsl/db_html.xsl b/lib/erl_docgen/priv/xsl/db_html.xsl index 4bc5abb364..ab5f24c406 100644 --- a/lib/erl_docgen/priv/xsl/db_html.xsl +++ b/lib/erl_docgen/priv/xsl/db_html.xsl @@ -578,8 +578,22 @@ <xsl:param name="curModule"/> <html> <head> - <link rel="stylesheet" href="{$topdocdir}/otp_doc.css" type="text/css"/> - <title>Erlang -- <xsl:value-of select="header/title"/></title> + <xsl:choose> + <xsl:when test="string-length($stylesheet) > 0"> + <link rel="stylesheet" href="{$topdocdir}/{$stylesheet}" type="text/css"/> + </xsl:when> + <xsl:otherwise> + <link rel="stylesheet" href="{$topdocdir}/otp_doc.css" type="text/css"/> + </xsl:otherwise> + </xsl:choose> + <xsl:choose> + <xsl:when test="string-length($winprefix) > 0"> + <title><xsl:value-of select="$winprefix"/> -- <xsl:value-of select="header/title"/></title> + </xsl:when> + <xsl:otherwise> + <title>Erlang -- <xsl:value-of select="header/title"/></title> + </xsl:otherwise> + </xsl:choose> </head> <body bgcolor="white" text="#000000" link="#0000ff" vlink="#ff00ff" alink="#ff0000"> @@ -719,7 +733,14 @@ <xsl:template name="menu_top"> - <img alt="Erlang logo" src="{$topdocdir}/erlang-logo.png"/> + <xsl:choose> + <xsl:when test="string-length($logo) > 0"> + <img alt="Erlang logo" src="{$topdocdir}/{$logo}"/> + </xsl:when> + <xsl:otherwise> + <img alt="Erlang logo" src="{$topdocdir}/erlang-logo.png"/> + </xsl:otherwise> + </xsl:choose> <br/> <small> <xsl:if test="boolean(/book/parts/part)"> @@ -731,7 +752,14 @@ <xsl:if test="boolean(/book/releasenotes)"> <a href="release_notes.html">Release Notes</a><br/> </xsl:if> - <a href="{$pdfdir}/{$appname}-{$appver}.pdf">PDF</a><br/> + <xsl:choose> + <xsl:when test="string-length($pdfname) > 0"> + <a href="{$pdfdir}/{$pdfname}.pdf">PDF</a><br/> + </xsl:when> + <xsl:otherwise> + <a href="{$pdfdir}/{$appname}-{$appver}.pdf">PDF</a><br/> + </xsl:otherwise> + </xsl:choose> <a href="{$topdocdir}/index.html">Top</a> </small> </xsl:template> diff --git a/lib/erl_docgen/priv/xsl/db_pdf.xsl b/lib/erl_docgen/priv/xsl/db_pdf.xsl index da96052462..7de5af2a49 100644 --- a/lib/erl_docgen/priv/xsl/db_pdf.xsl +++ b/lib/erl_docgen/priv/xsl/db_pdf.xsl @@ -650,7 +650,7 @@ <fo:flow flow-name="xsl-region-body"> <fo:block xsl:use-attribute-sets="cover.logo"> - <fo:external-graphic src="{$docgen}/priv/images/erlang-logo.gif"/> + <fo:external-graphic src="{$logo}"/> </fo:block> <fo:block xsl:use-attribute-sets="cover.title" id="cover-page"> <xsl:apply-templates/> diff --git a/lib/erl_docgen/priv/xsl/db_pdf_params.xsl b/lib/erl_docgen/priv/xsl/db_pdf_params.xsl index 4d9c08d0c3..4e61f1f476 100644 --- a/lib/erl_docgen/priv/xsl/db_pdf_params.xsl +++ b/lib/erl_docgen/priv/xsl/db_pdf_params.xsl @@ -87,7 +87,7 @@ <xsl:attribute-set name="cover.title"> <xsl:attribute name="border-before-style">solid</xsl:attribute> <xsl:attribute name="border-before-width">10pt</xsl:attribute> - <xsl:attribute name="border-color">#960003</xsl:attribute> + <xsl:attribute name="border-color"><xsl:value-of select="$pdfcolor"/></xsl:attribute> <xsl:attribute name="font-size">2.3em</xsl:attribute> <xsl:attribute name="padding-before">0.5em</xsl:attribute> <xsl:attribute name="text-align">end</xsl:attribute> @@ -101,7 +101,7 @@ <xsl:attribute-set name="cover.inner.copyright"> <xsl:attribute name="border-before-style">solid</xsl:attribute> <xsl:attribute name="border-before-width">1pt</xsl:attribute> - <xsl:attribute name="border-color">#960003</xsl:attribute> + <xsl:attribute name="border-color"><xsl:value-of select="$pdfcolor"/></xsl:attribute> <xsl:attribute name="font-weight">bold</xsl:attribute> <xsl:attribute name="padding-before">0.5em</xsl:attribute> <xsl:attribute name="space-before">200mm</xsl:attribute> @@ -160,7 +160,7 @@ <xsl:attribute-set name="h1"> <xsl:attribute name="border-after-style">solid</xsl:attribute> <xsl:attribute name="border-after-width">1pt</xsl:attribute> - <xsl:attribute name="border-color">#960003</xsl:attribute> + <xsl:attribute name="border-color"><xsl:value-of select="$pdfcolor"/></xsl:attribute> <xsl:attribute name="break-before">page</xsl:attribute> <xsl:attribute name="font-family">sans-serif</xsl:attribute> <xsl:attribute name="font-size">1.83em</xsl:attribute> @@ -226,7 +226,7 @@ <xsl:attribute-set name="page-header"> <xsl:attribute name="border-after-style">solid</xsl:attribute> <xsl:attribute name="border-after-width">2pt</xsl:attribute> - <xsl:attribute name="border-color">#960003</xsl:attribute> + <xsl:attribute name="border-color"><xsl:value-of select="$pdfcolor"/></xsl:attribute> <xsl:attribute name="font-family">sans-serif</xsl:attribute> <xsl:attribute name="font-size">0.9em</xsl:attribute> <xsl:attribute name="font-weight">bold</xsl:attribute> diff --git a/lib/erl_docgen/vsn.mk b/lib/erl_docgen/vsn.mk index b05df254a6..2599dc0ff7 100644 --- a/lib/erl_docgen/vsn.mk +++ b/lib/erl_docgen/vsn.mk @@ -1,2 +1,2 @@ -ERL_DOCGEN_VSN = 0.3.2 +ERL_DOCGEN_VSN = 0.3.3 diff --git a/lib/erl_interface/aclocal.m4 b/lib/erl_interface/aclocal.m4 index b1cf1fe404..9578cd35c4 100644 --- a/lib/erl_interface/aclocal.m4 +++ b/lib/erl_interface/aclocal.m4 @@ -740,11 +740,16 @@ dnl Try to find POSIX threads dnl The usual pthread lib... AC_CHECK_LIB(pthread, pthread_create, THR_LIBS="-lpthread") -dnl FreeBSD has pthreads in special c library, c_r... +dnl Very old versions of FreeBSD have pthreads in special c library, c_r... if test "x$THR_LIBS" = "x"; then AC_CHECK_LIB(c_r, pthread_create, THR_LIBS="-lc_r") fi +dnl QNX has pthreads in standard C library + if test "x$THR_LIBS" = "x"; then + AC_CHECK_FUNC(pthread_create, THR_LIBS="none_needed") + fi + dnl On ofs1 the '-pthread' switch should be used if test "x$THR_LIBS" = "x"; then AC_MSG_CHECKING([if the '-pthread' switch can be used]) @@ -765,6 +770,9 @@ dnl On ofs1 the '-pthread' switch should be used if test "x$THR_LIBS" != "x"; then THR_DEFS="$THR_DEFS -D_THREAD_SAFE -D_REENTRANT -DPOSIX_THREADS" THR_LIB_NAME=pthread + if test "x$THR_LIBS" = "xnone_needed"; then + THR_LIBS= + fi case $host_os in solaris*) THR_DEFS="$THR_DEFS -D_POSIX_PTHREAD_SEMANTICS" ;; diff --git a/lib/erl_interface/configure.in b/lib/erl_interface/configure.in index c958f80065..97f1cff345 100644 --- a/lib/erl_interface/configure.in +++ b/lib/erl_interface/configure.in @@ -1,7 +1,7 @@ # -*- Autoconf -*- # %CopyrightBegin% # -# Copyright Ericsson AB 2000-2011. All Rights Reserved. +# Copyright Ericsson AB 2000-2012. All Rights Reserved. # # The contents of this file are subject to the Erlang Public License, # Version 1.1, (the "License"); you may not use this file except in @@ -79,7 +79,7 @@ AC_ARG_ENABLE(threads, no) threads_disabled=yes ;; *) threads_disabled=no ;; esac ], -[ threads_disabled=no ]) +[ threads_disabled=maybe ]) dnl ---------------------------------------------------------------------- dnl Checks for programs @@ -237,12 +237,16 @@ AC_SUBST(THR_DEFS) AC_SUBST(EI_THREADS) case "$threads_disabled" in - no) + no|maybe) LM_CHECK_THR_LIB case "$THR_LIB_NAME" in "") EI_THREADS="false" + # Fail if --enable-threads given and no threads found + if test "x$threads_disabled" = "xno"; then + AC_MSG_ERROR(No threads support found) + fi ;; win32_threads) EI_THREADS="true" diff --git a/lib/erl_interface/doc/src/notes.xml b/lib/erl_interface/doc/src/notes.xml index 6791c39c7d..f0a9b336ff 100644 --- a/lib/erl_interface/doc/src/notes.xml +++ b/lib/erl_interface/doc/src/notes.xml @@ -30,6 +30,24 @@ </header> <p>This document describes the changes made to the Erl_interface application.</p> +<section><title>Erl_Interface 3.7.9</title> + + <section><title>Improvements and New Features</title> + <list> + <item> + <p>Teach lib/erl_interface/configure.in to look for + pthreads support in libc (where it can be found on + QNX)</p> <p>A minor tweak such that this configure + *fails* if you pass --enable-threads and no pthreads + support can be found.</p> (Thanks to Per Hedeland) + <p> + Own Id: OTP-10581</p> + </item> + </list> + </section> + +</section> + <section><title>Erl_Interface 3.7.8</title> <section><title>Improvements and New Features</title> diff --git a/lib/erl_interface/src/connect/ei_resolve.c b/lib/erl_interface/src/connect/ei_resolve.c index ba8f8fbce3..79d259b92d 100644 --- a/lib/erl_interface/src/connect/ei_resolve.c +++ b/lib/erl_interface/src/connect/ei_resolve.c @@ -186,11 +186,11 @@ static int verify_dns_configuration(void) * advance: increment buf by n bytes, reduce len by same amount . */ #if defined SIZEOF_VOID_P -#define ALIGNBYTES (SIZEOF_VOID_P - 1) +#define EI_ALIGNBYTES (SIZEOF_VOID_P - 1) #else -#define ALIGNBYTES (sizeof(void*) - 1) +#define EI_ALIGNBYTES (sizeof(void*) - 1) #endif -#define align_buf(buf,len) for (;(((unsigned)buf) & ALIGNBYTES); (buf)++, len--) +#define align_buf(buf,len) for (;(((unsigned)buf) & EI_ALIGNBYTES); (buf)++, len--) #define advance_buf(buf,len,n) ((buf)+=(n),(len)-=(n)) /* "and now the tricky part..." */ @@ -282,6 +282,8 @@ static int copy_hostent(struct hostent *dest, const struct hostent *src, char *b return 0; } +#undef EI_ALIGNBYTES + /* This function is a pseudo-reentrant version of gethostbyname(). It * uses locks to serialize the call to the regular (non-reentrant) * gethostbyname() and then copies the data into the user-provided diff --git a/lib/erl_interface/vsn.mk b/lib/erl_interface/vsn.mk index 4e401c874e..1718f38069 100644 --- a/lib/erl_interface/vsn.mk +++ b/lib/erl_interface/vsn.mk @@ -1 +1 @@ -EI_VSN = 3.7.8 +EI_VSN = 3.7.9 diff --git a/lib/eunit/doc/src/notes.xml b/lib/eunit/doc/src/notes.xml index 814580e228..b797be0ccb 100644 --- a/lib/eunit/doc/src/notes.xml +++ b/lib/eunit/doc/src/notes.xml @@ -5,7 +5,7 @@ <header> <copyright> <year>2008</year> - <year>2011</year> + <year>2012</year> <holder>Ericsson AB, All Rights Reserved</holder> </copyright> <legalnotice> diff --git a/lib/hipe/cerl/erl_bif_types.erl b/lib/hipe/cerl/erl_bif_types.erl index 776e336aea..98d65abba1 100644 --- a/lib/hipe/cerl/erl_bif_types.erl +++ b/lib/hipe/cerl/erl_bif_types.erl @@ -766,37 +766,6 @@ type(erlang, node, 0, _) -> t_node(); type(erlang, node, 1, Xs) -> strict(arg_types(erlang, node, 1), Xs, fun (_) -> t_node() end); type(erlang, nodes, 0, _) -> t_list(t_node()); -type(erlang, port_call, Arity, Xs) when Arity =:= 2; Arity =:= 3 -> - strict(arg_types(erlang, port_call, Arity), Xs, fun (_) -> t_any() end); -type(erlang, port_info, 1, Xs) -> - strict(arg_types(erlang, port_info, 1), Xs, - fun (_) -> t_sup(t_atom('undefined'), t_list()) end); -type(erlang, port_info, 2, Xs) -> - strict(arg_types(erlang, port_info, 2), Xs, - fun ([_Port, Item]) -> - t_sup(t_atom('undefined'), - case t_atom_vals(Item) of - ['connected'] -> t_tuple([Item, t_pid()]); - ['id'] -> t_tuple([Item, t_integer()]); - ['input'] -> t_tuple([Item, t_integer()]); - ['links'] -> t_tuple([Item, t_list(t_pid())]); - ['name'] -> t_tuple([Item, t_string()]); - ['output'] -> t_tuple([Item, t_integer()]); - ['os_pid'] -> t_tuple([Item, t_sup(t_non_neg_integer(),t_atom('undefined'))]); - ['registered_name'] -> t_tuple([Item, t_atom()]); - List when is_list(List) -> - t_tuple([t_sup([t_atom(A) || A <- List]), - t_sup([t_atom(), t_integer(), - t_pid(), t_list(t_pid()), - t_string()])]); - unknown -> - [_, PosItem] = arg_types(erlang, port_info, 2), - t_tuple([PosItem, - t_sup([t_atom(), t_integer(), - t_pid(), t_list(t_pid()), - t_string()])]) - end) - end); %% Guard bif, needs to be here. type(erlang, round, 1, Xs) -> strict(arg_types(erlang, round, 1), Xs, fun (_) -> t_integer() end); @@ -922,6 +891,14 @@ type(erlang, system_info, 1, Xs) -> t_non_neg_fixnum(), t_non_neg_fixnum()]), t_string()); + ['otp_release'] -> + t_string(); + ['port_parallelism'] -> + t_boolean(); + ['port_count'] -> + t_non_neg_fixnum(); + ['port_limit'] -> + t_non_neg_fixnum(); ['process_count'] -> t_non_neg_fixnum(); ['process_limit'] -> @@ -2275,16 +2252,6 @@ arg_types(erlang, node, 1) -> [t_identifier()]; arg_types(erlang, nodes, 0) -> []; -arg_types(erlang, port_call, 2) -> - [t_sup(t_port(), t_atom()), t_any()]; -arg_types(erlang, port_call, 3) -> - [t_sup(t_port(), t_atom()), t_integer(), t_any()]; -arg_types(erlang, port_info, 1) -> - [t_sup(t_port(), t_atom())]; -arg_types(erlang, port_info, 2) -> - [t_sup(t_port(), t_atom()), - t_atoms(['registered_name', 'id', 'connected', - 'links', 'name', 'input', 'output', 'os_pid'])]; %% Guard bif, needs to be here. arg_types(erlang, round, 1) -> [t_number()]; diff --git a/lib/hipe/doc/src/notes.xml b/lib/hipe/doc/src/notes.xml index 1841c7d9de..cfd22a9d8d 100644 --- a/lib/hipe/doc/src/notes.xml +++ b/lib/hipe/doc/src/notes.xml @@ -30,6 +30,22 @@ </header> <p>This document describes the changes made to HiPE.</p> +<section><title>Hipe 3.9.3</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + A faulty spec for process_info/2 could cause false + dialyzer warnings. The spec is corrected.</p> + <p> + Own Id: OTP-10584</p> + </item> + </list> + </section> + +</section> + <section><title>Hipe 3.9.2</title> <section><title>Fixed Bugs and Malfunctions</title> diff --git a/lib/hipe/vsn.mk b/lib/hipe/vsn.mk index 144167f5d1..f3e2e695b5 100644 --- a/lib/hipe/vsn.mk +++ b/lib/hipe/vsn.mk @@ -1 +1 @@ -HIPE_VSN = 3.9.2 +HIPE_VSN = 3.9.3 diff --git a/lib/ic/test/java_client_erl_server_SUITE.erl b/lib/ic/test/java_client_erl_server_SUITE.erl index c2bec94697..9e49305c3c 100644 --- a/lib/ic/test/java_client_erl_server_SUITE.erl +++ b/lib/ic/test/java_client_erl_server_SUITE.erl @@ -62,9 +62,14 @@ init_per_suite(Config) when is_list(Config) -> case case code:priv_dir(jinterface) of {error,bad_name} -> false; - P -> - filelib:is_dir(P) - end + P -> + case filelib:wildcard(filename:join(P, "*.jar")) of + [_|_] -> + true; + [] -> + false + end + end of true -> case find_executable(["java"]) of diff --git a/lib/ic/test/java_client_erl_server_SUITE_data/Makefile.src b/lib/ic/test/java_client_erl_server_SUITE_data/Makefile.src index ac8f2e619f..3143ab427b 100644 --- a/lib/ic/test/java_client_erl_server_SUITE_data/Makefile.src +++ b/lib/ic/test/java_client_erl_server_SUITE_data/Makefile.src @@ -68,7 +68,7 @@ EBINS = $(ERL_FILES:.erl=.@EMULATOR@) @IFEQ@ (@jinterface_classpath@,) all: -@ELSE +@ELSE@ all: $(CLASS_FILES) $(EBINS) @ENDIF@ diff --git a/lib/inets/doc/src/httpd.xml b/lib/inets/doc/src/httpd.xml index 7e21229fcf..3fced5dfcd 100644 --- a/lib/inets/doc/src/httpd.xml +++ b/lib/inets/doc/src/httpd.xml @@ -4,7 +4,7 @@ <erlref> <header> <copyright> - <year>1997</year><year>2011</year> + <year>1997</year><year>2012</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -178,7 +178,13 @@ <p>Note that this option is only used when the option <c>socket_type</c> has the value <c>ip_comm</c>. </p> </item> - + <marker id="prop_minimum_bytes_per_second"></marker> + <tag>{minimum_bytes_per_second, integer()}</tag> + <item> + <p>If given, sets a minimum bytes per second value for connections.</p> + <p>If the value is not reached, the socket will close for that connection.</p> + <p>The option is good for reducing the risk of "slow dos" attacks.</p> + </item> </taglist> <marker id="props_api_modules"></marker> diff --git a/lib/inets/doc/src/notes.xml b/lib/inets/doc/src/notes.xml index 3aae1ff70a..e0d6ae3454 100644 --- a/lib/inets/doc/src/notes.xml +++ b/lib/inets/doc/src/notes.xml @@ -33,7 +33,27 @@ </header> - <section> + <section><title>Inets 5.9.2</title> + + <section><title>Improvements and New Features</title> + <list> + <item> + <p> + Minimum bytes per second</p> + <p> + New option to http server, {minimum_bytes_per_second, + integer()}, for a connection, if it is not reached the + socket will close for that specific connection. Can be + used to prevent hanging requests from faulty clients.</p> + <p> + Own Id: OTP-10392</p> + </item> + </list> + </section> + +</section> + +<section> <title>Inets 5.9.1</title> <section> diff --git a/lib/inets/src/http_server/httpd_conf.erl b/lib/inets/src/http_server/httpd_conf.erl index 747118431e..a97bbd9b25 100644 --- a/lib/inets/src/http_server/httpd_conf.erl +++ b/lib/inets/src/http_server/httpd_conf.erl @@ -483,7 +483,7 @@ validate_properties(Properties) -> case mandatory_properties(Properties) of ok -> %% Second, check that property dependency are ok - {ok, validate_properties2(Properties)}; + {ok, check_minimum_bytes_per_second(validate_properties2(Properties))}; Error -> throw(Error) end. @@ -522,7 +522,18 @@ validate_properties2(Properties) -> throw(Error) end end. - +check_minimum_bytes_per_second(Properties) -> + case proplists:get_value(minimum_bytes_per_second, Properties, false) of + false -> + Properties; + Nr -> + case is_integer(Nr) of + false -> + throw({error, {minimum_bytes_per_second, is_not_integer}}); + _ -> + Properties + end + end. mandatory_properties(ConfigList) -> a_must(ConfigList, [server_name, port, server_root, document_root]). diff --git a/lib/inets/src/http_server/httpd_request_handler.erl b/lib/inets/src/http_server/httpd_request_handler.erl index b62c10bbc7..0f47d785ef 100644 --- a/lib/inets/src/http_server/httpd_request_handler.erl +++ b/lib/inets/src/http_server/httpd_request_handler.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 1997-2011. All Rights Reserved. +%% Copyright Ericsson AB 1997-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -44,7 +44,9 @@ timeout, %% infinity | integer() > 0 timer, %% ref() - Request timer headers, %% #http_request_h{} - body %% binary() + body, %% binary() + data, %% The total data received in bits, checked after 10s + byte_limit %% Bit limit per second before kick out }). %%==================================================================== @@ -98,7 +100,6 @@ init([Manager, ConfigDB, AcceptTimeout]) -> [{socket_type, SocketType}, {socket, Socket}]), TimeOut = httpd_util:lookup(ConfigDB, keep_alive_timeout, 150000), - Then = erlang:now(), ?hdrd("negotiate", []), @@ -139,12 +140,11 @@ continue_init(Manager, ConfigDB, SocketType, Socket, TimeOut) -> mfa = MFA}, ?hdrt("activate request timeout", []), - NewState = activate_request_timeout(State), ?hdrt("set socket options (binary, packet & active)", []), http_transport:setopts(SocketType, Socket, [binary, {packet, 0}, {active, once}]), - + NewState = data_receive_counter(activate_request_timeout(State), httpd_util:lookup(ConfigDB, minimum_bytes_per_second, false)), ?hdrt("init done", []), gen_server:enter_loop(?MODULE, [], NewState). @@ -205,16 +205,25 @@ handle_info({Proto, Socket, Data}, ?hdrd("received data", [{data, Data}, {proto, Proto}, {socket, Socket}, {socket_type, SockType}, {mfa, MFA}]), - + %% case (catch Module:Function([Data | Args])) of PROCESSED = (catch Module:Function([Data | Args])), - + NewDataSize = case State#state.byte_limit of + undefined -> + undefined; + _ -> + State#state.data + byte_size(Data) + end, ?hdrt("data processed", [{processing_result, PROCESSED}]), - case PROCESSED of {ok, Result} -> ?hdrd("data processed", [{result, Result}]), - NewState = cancel_request_timeout(State), + NewState = case NewDataSize of + undefined -> + cancel_request_timeout(State); + _ -> + set_new_data_size(cancel_request_timeout(State), NewDataSize) + end, handle_http_msg(Result, NewState); {error, {uri_too_long, MaxSize}, Version} -> @@ -239,7 +248,12 @@ handle_info({Proto, Socket, Data}, NewMFA -> ?hdrd("data processed - reactivate socket", [{new_mfa, NewMFA}]), http_transport:setopts(SockType, Socket, [{active, once}]), - {noreply, State#state{mfa = NewMFA}} + case NewDataSize of + undefined -> + {noreply, State#state{mfa = NewMFA}}; + _ -> + {noreply, State#state{mfa = NewMFA, data = NewDataSize}} + end end; %% Error cases @@ -263,7 +277,22 @@ handle_info(timeout, #state{mod = ModData} = State) -> error_log("The client did not send the whole request before the " "server side timeout", ModData), {stop, normal, State#state{response_sent = true}}; - +handle_info(check_data_first, #state{data = Data, byte_limit = Byte_Limit} = State) -> + case Data >= (Byte_Limit*3) of + true -> + erlang:send_after(1000, self(), check_data), + {noreply, State#state{data = 0}}; + _ -> + {stop, normal, State#state{response_sent = true}} + end; +handle_info(check_data, #state{data = Data, byte_limit = Byte_Limit} = State) -> + case Data >= Byte_Limit of + true -> + erlang:send_after(1000, self(), check_data), + {noreply, State#state{data = 0}}; + _ -> + {stop, normal, State#state{response_sent = true}} + end; %% Default case handle_info(Info, #state{mod = ModData} = State) -> Error = lists:flatten( @@ -311,6 +340,8 @@ code_change(_OldVsn, State, _Extra) -> %%-------------------------------------------------------------------- %%% Internal functions %%-------------------------------------------------------------------- +set_new_data_size(State, NewData) -> + State#state{data = NewData}. await_socket_ownership_transfer(AcceptTimeout) -> receive {socket_ownership_transfered, SocketType, Socket} -> @@ -603,7 +634,14 @@ activate_request_timeout(#state{timeout = Time} = State) -> ?hdrt("activate request timeout", [{time, Time}]), Ref = erlang:send_after(Time, self(), timeout), State#state{timer = Ref}. - +data_receive_counter(State, Byte_limit) -> + case Byte_limit of + false -> + State#state{data = 0}; + Nr -> + erlang:send_after(3000, self(), check_data_first), + State#state{data = 0, byte_limit = Nr} + end. cancel_request_timeout(#state{timer = undefined} = State) -> State; cancel_request_timeout(#state{timer = Timer} = State) -> diff --git a/lib/inets/src/inets_app/inets.appup.src b/lib/inets/src/inets_app/inets.appup.src index 2adb2a0fc8..ffd0ed622f 100644 --- a/lib/inets/src/inets_app/inets.appup.src +++ b/lib/inets/src/inets_app/inets.appup.src @@ -18,8 +18,14 @@ {"%VSN%", [ + {"5.9.1", + [ + {load_module, httpd_request_handler, soft_purge, soft_purge, []} + ] + }, {"5.9", [ + {load_module, httpd_request_handler, soft_purge, soft_purge, []}, {load_module, tftp, soft_purge, soft_purge, [inets_service]}, {load_module, inets_service, soft_purge, soft_purge, []}, {load_module, httpc, soft_purge, soft_purge, [httpc_manager]}, @@ -29,6 +35,7 @@ }, {"5.8.1", [ + {load_module, httpd_request_handler, soft_purge, soft_purge, []}, {load_module, tftp, soft_purge, soft_purge, [inets_service]}, {load_module, inets_service, soft_purge, soft_purge, []}, @@ -64,8 +71,14 @@ } ], [ + {"5.9.1", + [ + {load_module, httpd_request_handler, soft_purge, soft_purge, []} + ] + }, {"5.9", [ + {load_module, httpd_request_handler, soft_purge, soft_purge, []}, {load_module, tftp, soft_purge, soft_purge, [inets_service]}, {load_module, inets_service, soft_purge, soft_purge, []}, {load_module, httpc, soft_purge, soft_purge, [httpc_manager]}, @@ -75,6 +88,7 @@ }, {"5.8.1", [ + {load_module, httpd_request_handler, soft_purge, soft_purge, []}, {load_module, tftp, soft_purge, soft_purge, [inets_service]}, {load_module, inets_service, soft_purge, soft_purge, []}, diff --git a/lib/inets/test/erl_make_certs.erl b/lib/inets/test/erl_make_certs.erl index 254aa6d2f9..d6bdd05d01 100644 --- a/lib/inets/test/erl_make_certs.erl +++ b/lib/inets/test/erl_make_certs.erl @@ -137,10 +137,10 @@ decode_key(PemBin, Pw) -> encode_key(Key = #'RSAPrivateKey'{}) -> {ok, Der} = 'OTP-PUB-KEY':encode('RSAPrivateKey', Key), - {'RSAPrivateKey', list_to_binary(Der), not_encrypted}; + {'RSAPrivateKey', Der, not_encrypted}; encode_key(Key = #'DSAPrivateKey'{}) -> {ok, Der} = 'OTP-PUB-KEY':encode('DSAPrivateKey', Key), - {'DSAPrivateKey', list_to_binary(Der), not_encrypted}. + {'DSAPrivateKey', Der, not_encrypted}. make_tbs(SubjectKey, Opts) -> Version = list_to_atom("v"++integer_to_list(proplists:get_value(version, Opts, 3))), diff --git a/lib/inets/test/httpd_basic_SUITE.erl b/lib/inets/test/httpd_basic_SUITE.erl index 7a476ea14a..523cf9d38c 100644 --- a/lib/inets/test/httpd_basic_SUITE.erl +++ b/lib/inets/test/httpd_basic_SUITE.erl @@ -34,7 +34,8 @@ all() -> [ uri_too_long_414, header_too_long_413, - escaped_url_in_error_body + escaped_url_in_error_body, + slowdose ]. groups() -> @@ -278,7 +279,18 @@ escaped_url_in_error_body(Config) when is_list(Config) -> inets:stop(httpd, Pid), tsp("escaped_url_in_error_body -> done"), ok. - +slowdose(doc) -> + ["Testing minimum bytes per second option"]; +slowdose(Config) when is_list(Config) -> + HttpdConf = ?config(httpd_conf, Config), + {ok, Pid} = inets:start(httpd, [{port, 0}, {minimum_bytes_per_second, 200}|HttpdConf]), + Info = httpd:info(Pid), + Port = proplists:get_value(port, Info), + {ok, Socket} = gen_tcp:connect("localhost", Port, []), + receive + after 6000 -> + {error, closed} = gen_tcp:send(Socket, "Hey") + end. find_URL_path([]) -> ""; find_URL_path(["URL", URL | _]) -> diff --git a/lib/inets/test/inets_app_test.erl b/lib/inets/test/inets_app_test.erl index db2218f3b6..eabfa69f7c 100644 --- a/lib/inets/test/inets_app_test.erl +++ b/lib/inets/test/inets_app_test.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2002-2011. All Rights Reserved. +%% Copyright Ericsson AB 2002-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -35,6 +35,15 @@ init_per_testcase(undef_funcs, Config) -> NewConfig = lists:keydelete(watchdog, 1, Config), Dog = test_server:timetrap(inets_test_lib:minutes(10)), + + %% We need to check if there is a point to run this test. + %% On some platforms, crypto will not build, which in turn + %% causes ssl to not build (at this time, this will + %% change in the future). + %% So, we first check if we can start crypto, and if not, + %% we skip this test case! + ?ENSURE_STARTED(crypto), + [{watchdog, Dog}| NewConfig]; init_per_testcase(_, Config) -> Config. @@ -240,13 +249,6 @@ undef_funcs(suite) -> undef_funcs(doc) -> []; undef_funcs(Config) when is_list(Config) -> - %% We need to check if there is a point to run this test. - %% On some platforms, crypto will not build, which in turn - %% causes ssl to not build (at this time, this will - %% change in the future). - %% So, we first check if we can start crypto, and if not, - %% we skip this test case! - ?ENSURE_STARTED(crypto), App = inets, AppFile = key1search(app_file, Config), Mods = key1search(modules, AppFile), diff --git a/lib/inets/vsn.mk b/lib/inets/vsn.mk index 949eceea7f..0c7cb5e7c2 100644 --- a/lib/inets/vsn.mk +++ b/lib/inets/vsn.mk @@ -18,7 +18,7 @@ # %CopyrightEnd% APPLICATION = inets -INETS_VSN = 5.9.1 +INETS_VSN = 5.9.2 PRE_VSN = APP_VSN = "$(APPLICATION)-$(INETS_VSN)$(PRE_VSN)" diff --git a/lib/jinterface/java_src/com/ericsson/otp/erlang/OtpEpmd.java b/lib/jinterface/java_src/com/ericsson/otp/erlang/OtpEpmd.java index deac528133..b985f8aa50 100644 --- a/lib/jinterface/java_src/com/ericsson/otp/erlang/OtpEpmd.java +++ b/lib/jinterface/java_src/com/ericsson/otp/erlang/OtpEpmd.java @@ -358,7 +358,7 @@ public class OtpEpmd { } public static String[] lookupNames() throws IOException { - return lookupNames(InetAddress.getLocalHost()); + return lookupNames(InetAddress.getByName(null)); } public static String[] lookupNames(final InetAddress address) diff --git a/lib/jinterface/test/jitu.erl b/lib/jinterface/test/jitu.erl index fb262cf9d7..571a2dc9c7 100644 --- a/lib/jinterface/test/jitu.erl +++ b/lib/jinterface/test/jitu.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2004-2010. All Rights Reserved. +%% Copyright Ericsson AB 2004-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in diff --git a/lib/kernel/doc/src/heart.xml b/lib/kernel/doc/src/heart.xml index 2826d3d00a..2856d84dcf 100644 --- a/lib/kernel/doc/src/heart.xml +++ b/lib/kernel/doc/src/heart.xml @@ -4,7 +4,7 @@ <erlref> <header> <copyright> - <year>1996</year><year>2011</year> + <year>1996</year><year>2012</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> diff --git a/lib/kernel/doc/src/inet.xml b/lib/kernel/doc/src/inet.xml index d0ed26a18d..a1590c2dce 100644 --- a/lib/kernel/doc/src/inet.xml +++ b/lib/kernel/doc/src/inet.xml @@ -371,7 +371,51 @@ fe80::204:acff:fe17:bf38 </taglist> </desc> </func> - + <func> + <name name="parse_ipv4_address" arity="1" /> + <fsummary>Parse an IPv4 address</fsummary> + <desc> + <p>Parses an IPv4 address string and returns an <a href="#type-ip4_address">ip4_address()</a>. + Accepts a shortened IPv4 shortened address string.</p> + </desc> + </func> + <func> + <name name="parse_ipv4strict_address" arity="1" /> + <fsummary>Parse an IPv4 address strict.</fsummary> + <desc> + <p>Parses an IPv4 address string containing four fields, i.e <b>not</b> shortened, and returns an <a href="#type-ip4_adress">ip4_address()</a>.</p> + </desc> + </func> + <func> + <name name="parse_ipv6_address" arity="1" /> + <fsummary>Parse an IPv6 address</fsummary> + <desc> + <p>Parses an IPv6 address string and returns an <a href="#type-ip6_address">ip6_address()</a>. + If an IPv4 address string is passed, an IPv4-mapped IPv6 address is returned.</p> + </desc> + </func> + <func> + <name name="parse_ipv6strict_address" arity="1" /> + <fsummary>Parse an IPv6 address strict.</fsummary> + <desc> + <p>Parses an IPv6 address string and returns an <a href="#type-ip6_address">ip6_address()</a>. + Does <b>not</b> accept IPv4 adresses.</p> + </desc> + </func> + <func> + <name name="parse_address" arity="1" /> + <fsummary>Parse an IPv4 or IPv6 address.</fsummary> + <desc> + <p>Parses an IPv4 or IPv6 address string and returns an <a href="#type-ip4_address">ip4_address()</a> or <a href="#type-ip6_address">ip6_address()</a>. Accepts a shortened IPv4 address string.</p> + </desc> + </func> + <func> + <name name="parse_strict_address" arity="1" /> + <fsummary>Parse an IPv4 or IPv6 address strict.</fsummary> + <desc> + <p>Parses an IPv4 or IPv6 address string and returns an <a href="#type-ip4_address">ip4_address()</a> or <a href="#type-ip6_adress">ip6_address()</a>. Does <b>not</b> accept a shortened IPv4 address string.</p> + </desc> + </func> <func> <name name="peername" arity="1"/> <fsummary>Return the address and port for the other end of a connection</fsummary> @@ -512,19 +556,43 @@ fe80::204:acff:fe17:bf38 <c>[Byte1,Byte2|Binary]</c>.</p> </item> - <tag><c>{high_watermark, Size}</c></tag> - <item> <p> - Sender is forced busy if sent and enqueued data - reaches the highwater mark. - <br /> Default: 8192 kB. - </p> - </item> + <tag><c>{high_msgq_watermark, Size}</c> (TCP/IP sockets)</tag> + <item> + <p>The socket message queue will be set into a busy + state when the amount of data queued on the message + queue reaches this limit. Note that this limit only + concerns data that have not yet reached the ERTS internal + socket implementation. Default value used is 8 kB.</p> + <p>Senders of data to the socket will be suspended if + either the socket message queue is busy, or the socket + itself is busy.</p> + <p>For more information see the <c>low_msgq_watermark</c>, + <c>high_watermark</c>, and <c>low_watermark</c> options.</p> + <p>Note that distribution sockets will disable the use of + <c>high_msgq_watermark</c> and <c>low_msgq_watermark</c>, + and will instead use the + <seealso marker="erts:erlang#system_info_dist_buf_busy_limit">distribution + buffer busy limit</seealso> which is a similar feature.</p> + </item> + + <tag><c>{high_watermark, Size}</c> (TCP/IP sockets)</tag> + <item> + <p>The socket will be set into a busy state when the amount + of data queued internally by the ERTS socket implementation + reaches this limit. Default value used is 8 kB.</p> + <p>Senders of data to the socket will be suspended if + either the socket message queue is busy, or the socket + itself is busy.</p> + <p>For more information see the <c>low_watermark</c>, + <c>high_msgq_watermark</c>, and <c>low_msqg_watermark</c> + options.</p> + </item> <tag><c>{ipv6_v6only, Boolean}</c></tag> <item> <p> Restricts the socket to only use IPv6, prohibiting any - IPv4 connections. This only applicable for + IPv4 connections. This is only applicable for IPv6 sockets (option <c>inet6</c>). </p> <p> @@ -561,9 +629,10 @@ fe80::204:acff:fe17:bf38 Setting this option on platforms where it does not exist is ignored and getting this option with <seealso marker="#getopts/2">getopts/2</seealso> - returns no value. On Windows the option acually does - not exist but it is emulated as being a read-only option - with the value <c>true</c>. + returns no value i.e the returned list will not contain an + <c>{ipv6_v6only,_}</c> tuple. On Windows the option acually + does not exist, but it is emulated as being a + read-only option with the value <c>true</c>. </p> <p> So it boils down to that setting this option to <c>true</c> @@ -602,14 +671,41 @@ fe80::204:acff:fe17:bf38 the flushing time-out in seconds.</p> </item> - <tag><c>{low_watermark, Size}</c></tag> - <item> <p> - If the port has reached its <c>high_watermark</c> it will - force busy onto senders. When the port data queue reaches the - <c>low_watermark</c> callers are no longer forced busy. - <br /> Default: 4096 kB. - </p> - </item> + <tag><c>{low_msgq_watermark, Size}</c> (TCP/IP sockets)</tag> + <item> + <p>If the socket message queue is in a busy state, the + socket message queue will be set in a not busy state when + the amount of data queued in the message queue falls + below this limit. Note that this limit only concerns data + that have not yet reached the ERTS internal socket + implementation. Default value used is 4 kB.</p> + <p>Senders that have been suspended due to either a + busy message queue or a busy socket, will be resumed + when neither the socket message queue, nor the socket + are busy.</p> + <p>For more information see the <c>high_msgq_watermark</c>, + <c>high_watermark</c>, and <c>low_watermark</c> options.</p> + <p>Note that distribution sockets will disable the use of + <c>high_msgq_watermark</c> and <c>low_msgq_watermark</c>, + and will instead use the + <seealso marker="erts:erlang#system_info_dist_buf_busy_limit">distribution + buffer busy limit</seealso> which is a similar feature.</p> + </item> + + <tag><c>{low_watermark, Size}</c> (TCP/IP sockets)</tag> + <item> + <p>If the socket is in a busy state, the socket will + be set in a not busy state when the amount of data + queued internally by the ERTS socket implementation + falls below this limit. Default value used is 4 kB.</p> + <p>Senders that have been suspended due to either a + busy message queue or a busy socket, will be resumed + when neither the socket message queue, nor the socket + are busy.</p> + <p>For more information see the <c>high_watermark</c>, + <c>high_msgq_watermark</c>, and <c>low_msgq_watermark</c> + options.</p> + </item> <tag><c>{mode, Mode :: binary | list}</c></tag> <item> diff --git a/lib/kernel/doc/src/notes.xml b/lib/kernel/doc/src/notes.xml index 8e911a406b..78bc533464 100644 --- a/lib/kernel/doc/src/notes.xml +++ b/lib/kernel/doc/src/notes.xml @@ -30,6 +30,44 @@ </header> <p>This document describes the changes made to the Kernel application.</p> +<section><title>Kernel 2.15.3</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + Ensure 'erl_crash.dump' when asked for it. This will + change erl_crash.dump behaviour.</p> + <p> + * Not setting ERL_CRASH_DUMP_SECONDS will now terminate + beam immediately on a crash without writing a crash dump + file.</p> + <p> + * Setting ERL_CRASH_DUMP_SECONDS to 0 will also terminate + beam immediately on a crash without writing a crash dump + file, i.e. same as not setting ERL_CRASH_DUMP_SECONDS + environment variable.</p> + <p> + * Setting ERL_CRASH_DUMP_SECONDS to a negative value will + let the beam wait indefinitely on the crash dump file + being written.</p> + <p> + * Setting ERL_CRASH_DUMP_SECONDS to a positive value will + let the beam wait that many seconds on the crash dump + file being written.</p> + <p> + A positive value will set an alarm/timeout for restart + both in beam and in heart if heart is running.</p> + <p> + *** POTENTIAL INCOMPATIBILITY ***</p> + <p> + Own Id: OTP-10422 Aux Id: kunagi-250 [161] </p> + </item> + </list> + </section> + +</section> + <section><title>Kernel 2.15.2</title> <section><title>Fixed Bugs and Malfunctions</title> diff --git a/lib/kernel/src/application_controller.erl b/lib/kernel/src/application_controller.erl index 68cd26ec10..75ce852001 100644 --- a/lib/kernel/src/application_controller.erl +++ b/lib/kernel/src/application_controller.erl @@ -1960,5 +1960,5 @@ to_string(Term) -> true -> Term; false -> - lists:flatten(io_lib:write(Term)) + lists:flatten(io_lib:format("~134217728p", [Term])) end. diff --git a/lib/kernel/src/gen_tcp.erl b/lib/kernel/src/gen_tcp.erl index 22e6aa5bc8..ec13ab6d2e 100644 --- a/lib/kernel/src/gen_tcp.erl +++ b/lib/kernel/src/gen_tcp.erl @@ -37,9 +37,11 @@ {dontroute, boolean()} | {exit_on_close, boolean()} | {header, non_neg_integer()} | + {high_msgq_watermark, pos_integer()} | {high_watermark, non_neg_integer()} | {keepalive, boolean()} | {linger, {boolean(), non_neg_integer()}} | + {low_msgq_watermark, pos_integer()} | {low_watermark, non_neg_integer()} | {mode, list | binary} | list | binary | {nodelay, boolean()} | @@ -67,9 +69,11 @@ dontroute | exit_on_close | header | + high_msgq_watermark | high_watermark | keepalive | linger | + low_msgq_watermark | low_watermark | mode | nodelay | diff --git a/lib/kernel/src/heart.erl b/lib/kernel/src/heart.erl index de287bfa43..87cb9d7f51 100644 --- a/lib/kernel/src/heart.erl +++ b/lib/kernel/src/heart.erl @@ -46,6 +46,7 @@ -define(TIMEOUT, 5000). -define(CYCLE_TIMEOUT, 10000). +-define(HEART_PORT_NAME, heart_port). %%--------------------------------------------------------------------- @@ -132,7 +133,7 @@ start_portprogram() -> case wait_ack(Port) of ok -> %% register port so the vm can find it if need be - register(heart_port, Port), + register(?HEART_PORT_NAME, Port), {ok, Port}; {error, Reason} -> report_problem({{port_problem, Reason}, @@ -228,6 +229,7 @@ no_reboot_shutdown(Port) -> end. do_cycle_port_program(Caller, Parent, Port, Cmd) -> + unregister(?HEART_PORT_NAME), case catch start_portprogram() of {ok, NewPort} -> send_shutdown(Port), diff --git a/lib/kernel/src/inet.erl b/lib/kernel/src/inet.erl index 92c1802a86..9670271b2e 100644 --- a/lib/kernel/src/inet.erl +++ b/lib/kernel/src/inet.erl @@ -30,7 +30,9 @@ ifget/3, ifget/2, ifset/3, ifset/2, getstat/1, getstat/2, ip/1, stats/0, options/0, - pushf/3, popf/1, close/1, gethostname/0, gethostname/1]). + pushf/3, popf/1, close/1, gethostname/0, gethostname/1, + parse_ipv4_address/1, parse_ipv6_address/1, parse_ipv4strict_address/1, + parse_ipv6strict_address/1, parse_address/1, parse_strict_address/1]). -export([connect_options/2, listen_options/2, udp_options/2, sctp_options/2]). @@ -527,6 +529,48 @@ getservbyname(Name, Protocol) when is_atom(Name) -> Error -> Error end. +-spec parse_ipv4_address(Address) -> + {ok, IPv4Address} | {error, einval} when + Address :: string(), + IPv4Address :: ip_address(). +parse_ipv4_address(Addr) -> + inet_parse:ipv4_address(Addr). + +-spec parse_ipv6_address(Address) -> + {ok, IPv6Address} | {error, einval} when + Address :: string(), + IPv6Address :: ip_address(). +parse_ipv6_address(Addr) -> + inet_parse:ipv6_address(Addr). + +-spec parse_ipv4strict_address(Address) -> + {ok, IPv4Address} | {error, einval} when + Address :: string(), + IPv4Address :: ip_address(). +parse_ipv4strict_address(Addr) -> + inet_parse:ipv4strict_address(Addr). + +-spec parse_ipv6strict_address(Address) -> + {ok, IPv6Address} | {error, einval} when + Address :: string(), + IPv6Address :: ip_address(). +parse_ipv6strict_address(Addr) -> + inet_parse:ipv6strict_address(Addr). + +-spec parse_address(Address) -> + {ok, IPAddress} | {error, einval} when + Address :: string(), + IPAddress :: ip_address(). +parse_address(Addr) -> + inet_parse:address(Addr). + +-spec parse_strict_address(Address) -> + {ok, IPAddress} | {error, einval} when + Address :: string(), + IPAddress :: ip_address(). +parse_strict_address(Addr) -> + inet_parse:strict_address(Addr). + %% Return a list of available options options() -> [ @@ -535,6 +579,7 @@ options() -> buffer, header, active, packet, deliver, mode, multicast_if, multicast_ttl, multicast_loop, exit_on_close, high_watermark, low_watermark, + high_msgq_watermark, low_msgq_watermark, send_timeout, send_timeout_close ]. @@ -552,8 +597,8 @@ stats() -> connect_options() -> [tos, priority, reuseaddr, keepalive, linger, sndbuf, recbuf, nodelay, header, active, packet, packet_size, buffer, mode, deliver, - exit_on_close, high_watermark, low_watermark, send_timeout, - send_timeout_close, delay_send,raw]. + exit_on_close, high_watermark, low_watermark, high_msgq_watermark, + low_msgq_watermark, send_timeout, send_timeout_close, delay_send, raw]. connect_options(Opts, Family) -> BaseOpts = @@ -608,8 +653,9 @@ con_add(Name, Val, R, Opts, AllOpts) -> listen_options() -> [tos, priority, reuseaddr, keepalive, linger, sndbuf, recbuf, nodelay, header, active, packet, buffer, mode, deliver, backlog, ipv6_v6only, - exit_on_close, high_watermark, low_watermark, send_timeout, - send_timeout_close, delay_send, packet_size,raw]. + exit_on_close, high_watermark, low_watermark, high_msgq_watermark, + low_msgq_watermark, send_timeout, send_timeout_close, delay_send, + packet_size, raw]. listen_options(Opts, Family) -> BaseOpts = diff --git a/lib/kernel/src/inet_int.hrl b/lib/kernel/src/inet_int.hrl index 6d808b54cd..000119bc74 100644 --- a/lib/kernel/src/inet_int.hrl +++ b/lib/kernel/src/inet_int.hrl @@ -141,6 +141,8 @@ -define(INET_LOPT_READ_PACKETS, 33). -define(INET_OPT_RAW, 34). -define(INET_LOPT_TCP_SEND_TIMEOUT_CLOSE, 35). +-define(INET_LOPT_TCP_MSGQ_HIWTRMRK, 36). +-define(INET_LOPT_TCP_MSGQ_LOWTRMRK, 37). % Specific SCTP options: separate range: -define(SCTP_OPT_RTOINFO, 100). -define(SCTP_OPT_ASSOCINFO, 101). diff --git a/lib/kernel/src/inet_parse.erl b/lib/kernel/src/inet_parse.erl index ba62a59068..3551e701b6 100644 --- a/lib/kernel/src/inet_parse.erl +++ b/lib/kernel/src/inet_parse.erl @@ -36,7 +36,7 @@ -export([ipv4_address/1, ipv6_address/1]). -export([ipv4strict_address/1, ipv6strict_address/1]). --export([address/1]). +-export([address/1, strict_address/1]). -export([visible_string/1, domain/1]). -export([ntoa/1, dots/1]). -export([split_line/1]). @@ -456,6 +456,17 @@ address(Cs) when is_list(Cs) -> address(_) -> {error, einval}. +%%Parse ipv4 strict address or ipv6 strict address +strict_address(Cs) when is_list(Cs) -> + case ipv4strict_address(Cs) of + {ok,IP} -> + {ok,IP}; + _ -> + ipv6strict_address(Cs) + end; +strict_address(Cs) -> + {error, einval}. + %% %% Parse IPv4 address: %% d1.d2.d3.d4 diff --git a/lib/kernel/test/code_SUITE.erl b/lib/kernel/test/code_SUITE.erl index 5e0300639e..d7424c0c9a 100644 --- a/lib/kernel/test/code_SUITE.erl +++ b/lib/kernel/test/code_SUITE.erl @@ -684,8 +684,8 @@ ext_mod_dep(Config) when is_list(Config) -> xref:set_default(s, [{verbose,false},{warnings,false}, {builtins,true},{recurse,true}]), xref:set_library_path(s, code:get_path()), - xref:add_directory(s, filename:dirname(code:which(kernel))), - xref:add_directory(s, filename:dirname(code:which(lists))), + xref:add_directory(s, filename:join(code:lib_dir(kernel),"ebin")), + xref:add_directory(s, filename:join(code:lib_dir(stdlib),"ebin")), case catch ext_mod_dep2() of {'EXIT', Reason} -> xref:stop(s), diff --git a/lib/kernel/test/global_SUITE.erl b/lib/kernel/test/global_SUITE.erl index 60035b50a0..b40c50f79f 100644 --- a/lib/kernel/test/global_SUITE.erl +++ b/lib/kernel/test/global_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 1997-2011. All Rights Reserved. +%% Copyright Ericsson AB 1997-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -168,7 +168,7 @@ end_per_testcase(_Case, Config) -> register_1(suite) -> []; register_1(Config) when is_list(Config) -> Timeout = 15, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), P = spawn_link(?MODULE, lock_global, [self(), Config]), @@ -195,7 +195,6 @@ register_1(Config) when is_list(Config) -> ?line _ = global:unregister_name(foo), write_high_level_trace(Config), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. lock_global(Parent, Config) -> @@ -238,7 +237,7 @@ lock_global(Parent, Config) -> both_known_1(suite) -> []; both_known_1(Config) when is_list(Config) -> Timeout = 30, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), @@ -316,7 +315,6 @@ both_known_1(Config) when is_list(Config) -> stop_node(Cp3), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. lost_unregister(suite) -> []; @@ -324,7 +322,7 @@ lost_unregister(doc) -> ["OTP-6428. An unregistered name reappears."]; lost_unregister(Config) when is_list(Config) -> Timeout = 30, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), @@ -361,7 +359,6 @@ lost_unregister(Config) when is_list(Config) -> stop_node(B), stop_node(C), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. -define(UNTIL_LOOP, 300). @@ -448,7 +445,7 @@ lock_global2(Id, Parent) -> names(suite) -> []; names(Config) when is_list(Config) -> Timeout = 30, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), ?line OrigNames = global:registered_names(), @@ -532,7 +529,6 @@ names(Config) when is_list(Config) -> ?line ?UNTIL(undefined =:= global:whereis_name(test)), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. names_hidden(suite) -> []; @@ -541,7 +537,7 @@ names_hidden(doc) -> "visible nodes."]; names_hidden(Config) when is_list(Config) -> Timeout = 30, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), ?line OrigNames = global:registered_names(), @@ -639,13 +635,12 @@ names_hidden(Config) when is_list(Config) -> stop_node(Cp3), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. locks(suite) -> []; locks(Config) when is_list(Config) -> Timeout = 30, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), ?line {ok, Cp1} = start_node(cp1, Config), @@ -750,7 +745,6 @@ locks(Config) when is_list(Config) -> ?line test_server:sleep(10), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. @@ -760,7 +754,7 @@ locks_hidden(doc) -> "visible nodes."]; locks_hidden(Config) when is_list(Config) -> Timeout = 30, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), ?line OrigNodes = nodes(), @@ -833,14 +827,13 @@ locks_hidden(Config) when is_list(Config) -> stop_node(Cp3), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. bad_input(suite) -> []; bad_input(Config) when is_list(Config) -> Timeout = 15, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), Pid = whereis(global_name_server), @@ -854,13 +847,12 @@ bad_input(Config) when is_list(Config) -> ?line {'EXIT', _} = (catch global:trans({id, self()}, {m,f}, [node()], -1)), ?line Pid = whereis(global_name_server), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. names_and_locks(suite) -> []; names_and_locks(Config) when is_list(Config) -> Timeout = 30, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), ?line OrigNames = global:registered_names(), @@ -922,7 +914,6 @@ names_and_locks(Config) when is_list(Config) -> stop_node(Cp3), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. lock_die(suite) -> []; @@ -930,7 +921,7 @@ lock_die(doc) -> ["OTP-6341. Remove locks using monitors."]; lock_die(Config) when is_list(Config) -> Timeout = 30, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), ?line OrigNames = global:registered_names(), @@ -964,7 +955,6 @@ lock_die(Config) when is_list(Config) -> stop_node(Cp1), stop_node(Cp2), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. name_die(suite) -> []; @@ -972,7 +962,7 @@ name_die(doc) -> ["OTP-6341. Remove names using monitors."]; name_die(Config) when is_list(Config) -> Timeout = 30, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), ?line OrigNames = global:registered_names(), @@ -1027,7 +1017,6 @@ name_die(Config) when is_list(Config) -> write_high_level_trace(Config), stop_nodes(Cps), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. kill_pid(Pid, File, Config) -> @@ -1040,7 +1029,7 @@ basic_partition(doc) -> ["Tests that two partitioned networks exchange correct info."]; basic_partition(Config) when is_list(Config) -> Timeout = 30, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), ?line OrigNames = global:registered_names(), @@ -1088,7 +1077,6 @@ basic_partition(Config) when is_list(Config) -> stop_node(Cp2), stop_node(Cp3), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. basic_name_partition(suite) -> @@ -1099,7 +1087,7 @@ basic_name_partition(doc) -> "during connect phase are handled correctly."]; basic_name_partition(Config) when is_list(Config) -> Timeout = 60, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), ?line OrigNames = global:registered_names(), @@ -1167,7 +1155,6 @@ basic_name_partition(Config) when is_list(Config) -> stop_node(Cp2), stop_node(Cp3), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. %Peer nodes cp0 - cp6 are started. Break apart the connections from @@ -1190,7 +1177,7 @@ advanced_partition(doc) -> "partitioned networks connect."]; advanced_partition(Config) when is_list(Config) -> Timeout = 60, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), ?line OrigNames = global:registered_names(), @@ -1278,7 +1265,6 @@ advanced_partition(Config) when is_list(Config) -> stop_node(Cp5), stop_node(Cp6), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. %Peer nodes cp0 - cp6 are started, and partitioned just like in @@ -1297,7 +1283,7 @@ stress_partition(doc) -> "go up/down a bit."]; stress_partition(Config) when is_list(Config) -> Timeout = 90, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), ?line OrigNames = global:registered_names(), @@ -1377,7 +1363,6 @@ stress_partition(Config) when is_list(Config) -> stop_node(Cp7), stop_node(Cp8), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. @@ -1408,7 +1393,7 @@ ring(doc) -> "Make sure that there's just one winner."]; ring(Config) when is_list(Config) -> Timeout = 60, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), ?line OrigNames = global:registered_names(), @@ -1486,7 +1471,6 @@ ring(Config) when is_list(Config) -> stop_node(Cp7), stop_node(Cp8), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. simple_ring(suite) -> @@ -1499,7 +1483,7 @@ simple_ring(doc) -> "Make sure that there's just one winner."]; simple_ring(Config) when is_list(Config) -> Timeout = 60, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), ?line OrigNames = global:registered_names(), @@ -1565,7 +1549,6 @@ simple_ring(Config) when is_list(Config) -> stop_node(Cp4), stop_node(Cp5), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. line(suite) -> @@ -1576,7 +1559,7 @@ line(doc) -> "Make sure that there's just one winner."]; line(Config) when is_list(Config) -> Timeout = 60, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), ?line OrigNames = global:registered_names(), @@ -1655,7 +1638,6 @@ line(Config) when is_list(Config) -> stop_node(Cp7), stop_node(Cp8), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. @@ -1669,7 +1651,7 @@ simple_line(doc) -> "Make sure that there's just one winner."]; simple_line(Config) when is_list(Config) -> Timeout = 60, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), ?line OrigNames = global:registered_names(), @@ -1735,7 +1717,6 @@ simple_line(Config) when is_list(Config) -> stop_node(Cp4), stop_node(Cp5), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. otp_1849(suite) -> []; @@ -1743,7 +1724,7 @@ otp_1849(doc) -> ["Test ticket: Global should keep track of all pids that set the same lock."]; otp_1849(Config) when is_list(Config) -> Timeout = 30, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), ?line {ok, Cp1} = start_node(cp1, Config), @@ -1822,7 +1803,6 @@ otp_1849(Config) when is_list(Config) -> stop_node(Cp2), stop_node(Cp3), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. @@ -1840,7 +1820,7 @@ otp_3162(Config) when is_list(Config) -> do_otp_3162(StartFun, Config) -> Timeout = 30, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), ?line [Cp1, Cp2, Cp3] = StartFun(), @@ -1898,7 +1878,6 @@ do_otp_3162(StartFun, Config) -> stop_node(Cp2), stop_node(Cp3), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. @@ -1907,7 +1886,7 @@ otp_5640(doc) -> ["OTP-5640. 'allow' multiple names for registered processes."]; otp_5640(Config) when is_list(Config) -> Timeout = 25, - ?line Dog = test_server:timetrap(test_server:seconds(Timeout)), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), init_condition(Config), ?line {ok, B} = start_node(b, Config), @@ -1965,7 +1944,6 @@ otp_5640(Config) when is_list(Config) -> write_high_level_trace(Config), stop_node(B), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. otp_5640_proc(_Parent) -> @@ -1979,7 +1957,7 @@ otp_5737(doc) -> ["OTP-5737. set_lock/3 and trans/4 accept Retries = 0."]; otp_5737(Config) when is_list(Config) -> Timeout = 25, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), @@ -2000,7 +1978,6 @@ otp_5737(Config) when is_list(Config) -> write_high_level_trace(Config), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. otp_6931(suite) -> []; @@ -2025,7 +2002,7 @@ simple_disconnect(suite) -> []; simple_disconnect(doc) -> ["OTP-5563. Disconnected nodes (not partitions)"]; simple_disconnect(Config) when is_list(Config) -> Timeout = 30, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), ?line OrigNames = global:registered_names(), @@ -2075,7 +2052,6 @@ simple_disconnect(Config) when is_list(Config) -> write_high_level_trace(Config), stop_nodes(Cps), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. %% Not used right now. @@ -2118,7 +2094,7 @@ simple_resolve(suite) -> []; simple_resolve(doc) -> ["OTP-5563. Partitions and names."]; simple_resolve(Config) when is_list(Config) -> Timeout = 360, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), ?line OrigNames = global:registered_names(), @@ -2245,7 +2221,6 @@ simple_resolve(Config) when is_list(Config) -> write_high_level_trace(Config), stop_nodes(Cps), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. simple_resolve2(suite) -> []; @@ -2255,7 +2230,7 @@ simple_resolve2(Config) when is_list(Config) -> %% always work to re-start z_2. "Cannot be a global bug." Timeout = 30, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), ?line OrigNames = global:registered_names(), @@ -2283,7 +2258,6 @@ simple_resolve2(Config) when is_list(Config) -> write_high_level_trace(Config), stop_nodes(Cps), % Not all nodes may be present, but it works anyway. ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. simple_resolve3(suite) -> []; @@ -2292,7 +2266,7 @@ simple_resolve3(Config) when is_list(Config) -> %% Continuation of simple_resolve. Timeout = 30, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), ?line OrigNames = global:registered_names(), @@ -2320,7 +2294,6 @@ simple_resolve3(Config) when is_list(Config) -> write_high_level_trace(Config), stop_nodes(Cps), % Not all nodes may be present, but it works anyway. ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. res({Res,Resolver}, [N1, A2, Z2], Cf) -> @@ -2504,7 +2477,7 @@ leftover_name(suite) -> []; leftover_name(doc) -> ["OTP-5563. Bug: nodedown while synching."]; leftover_name(Config) when is_list(Config) -> Timeout = 30, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), ?line OrigNames = global:registered_names(), @@ -2565,7 +2538,6 @@ leftover_name(Config) when is_list(Config) -> write_high_level_trace(Config), stop_nodes(Cps), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. %% Runs on n_1 @@ -2604,7 +2576,7 @@ re_register_name(Config) when is_list(Config) -> %% occupied by links, that's all. %% Later: now monitors are checked. Timeout = 15, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), Me = self(), @@ -2618,7 +2590,6 @@ re_register_name(Config) when is_list(Config) -> receive {Pid2, MonitoredBy2} -> [_] = MonitoredBy2 end, ?line _ = global:unregister_name(name), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. proc(Parent) -> @@ -2652,7 +2623,7 @@ do_name_exit(StartFun, Version, Config) -> %% The current release uses monitors so this test is not so relevant. Timeout = 60, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), ?line OrigNames = global:registered_names(), @@ -2692,7 +2663,6 @@ do_name_exit(StartFun, Version, Config) -> write_high_level_trace(Config), stop_nodes(Cps), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. long_lock(Parent) -> @@ -2709,7 +2679,7 @@ external_nodes(suite) -> []; external_nodes(doc) -> ["OTP-5563. External nodes (cnodes)."]; external_nodes(Config) when is_list(Config) -> Timeout = 30, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), ?line OrigNames = global:registered_names(), @@ -2793,7 +2763,6 @@ external_nodes(Config) when is_list(Config) -> ?line ?UNTIL(length(get_ext_names()) =:= 0), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. get_ext_names() -> @@ -2845,8 +2814,8 @@ many_nodes(suite) -> many_nodes(doc) -> ["OTP-5770. Start many nodes. Make them connect at the same time."]; many_nodes(Config) when is_list(Config) -> - Timeout = 180, - ?line Dog = test_server:timetrap({seconds,Timeout}), + Timeout = 240, + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), ?line OrigNames = global:registered_names(), @@ -2902,7 +2871,6 @@ many_nodes(Config) when is_list(Config) -> write_high_level_trace(Config), ?line stop_nodes(Cps), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), Diff = Time2 - Time, Return = lists:flatten(io_lib:format("~w nodes took ~w ms", [N_cps, Diff])), @@ -2988,7 +2956,7 @@ sync_0(doc) -> ["OTP-5770. sync/0."]; sync_0(Config) when is_list(Config) -> Timeout = 180, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), @@ -3013,7 +2981,6 @@ sync_0(Config) when is_list(Config) -> stop_nodes(Cps), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. start_and_sync([]) -> @@ -3031,7 +2998,7 @@ global_groups_change(suite) -> []; global_groups_change(doc) -> ["Test change of global_groups parameter."]; global_groups_change(Config) -> Timeout = 90, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), ?line M = from($@, atom_to_list(node())), @@ -3376,7 +3343,6 @@ global_groups_change(Config) -> stop_node(CpE), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. sync_and_wait(Node) -> @@ -3855,7 +3821,7 @@ start_node_rel(Name0, Rel, Config) -> Name = node_name(Name0, Config), {Release, Compat} = case Rel of this -> - {[this], "+R8"}; + {[this], ""}; Rel when is_atom(Rel) -> {[{release, atom_to_list(Rel)}], ""}; RelList -> @@ -3919,7 +3885,7 @@ global_lost_nodes(doc) -> ["Tests that locally loaded nodes do not loose contact with other nodes."]; global_lost_nodes(Config) when is_list(Config) -> Timeout = 60, - Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), @@ -3943,7 +3909,6 @@ global_lost_nodes(Config) when is_list(Config) -> ?line stop_node(Node1), ?line stop_node(Node2), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. global_load(MyName, OtherNode, OtherName) -> @@ -3994,7 +3959,7 @@ mass_death(doc) -> ["Tests the simultaneous death of many processes with registered names"]; mass_death(Config) when is_list(Config) -> Timeout = 90, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), ?line OrigNames = global:registered_names(), @@ -4023,9 +3988,9 @@ mass_death(Config) when is_list(Config) -> {H,M,S} = time(), io:format("Started probing: ~.4.0w-~.2.0w-~.2.0w ~.2.0w:~.2.0w:~.2.0w~n", [YYYY,MM,DD,H,M,S]), - wait_mass_death(Dog, Nodes, OrigNames, erlang:now(), Config). + wait_mass_death(Nodes, OrigNames, erlang:now(), Config). -wait_mass_death(Dog, Nodes, OrigNames, Then, Config) -> +wait_mass_death(Nodes, OrigNames, Then, Config) -> ?line Names = global:registered_names(), ?line case Names--OrigNames of @@ -4036,12 +4001,11 @@ wait_mass_death(Dog, Nodes, OrigNames, Then, Config) -> stop_node(Node) end, Nodes), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), {comment,lists:flatten(io_lib:format("~.3f s~n", [T/1000.0]))}; Ndiff -> ?line io:format("Ndiff: ~p~n", [Ndiff]), ?line test_server:sleep(1000), - ?line wait_mass_death(Dog, Nodes, OrigNames, Then, Config) + ?line wait_mass_death(Nodes, OrigNames, Then, Config) end. mass_spawn([]) -> @@ -4213,7 +4177,7 @@ garbage_messages(suite) -> []; garbage_messages(Config) when is_list(Config) -> Timeout = 25, - ?line Dog = test_server:timetrap({seconds,Timeout}), + ct:timetrap({seconds,Timeout}), init_high_level_trace(Timeout), ?line init_condition(Config), ?line [Slave] = start_nodes([garbage_messages], slave, Config), @@ -4233,7 +4197,6 @@ garbage_messages(Config) when is_list(Config) -> write_high_level_trace(Config), ?line stop_node(Slave), ?line init_condition(Config), - ?line test_server:timetrap_cancel(Dog), ok. wait_for_ready_net(Config) -> diff --git a/lib/kernel/test/heart_SUITE.erl b/lib/kernel/test/heart_SUITE.erl index 970a03cfd5..2ec3b7c297 100644 --- a/lib/kernel/test/heart_SUITE.erl +++ b/lib/kernel/test/heart_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 1996-2011. All Rights Reserved. +%% Copyright Ericsson AB 1996-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in diff --git a/lib/kernel/test/inet_SUITE.erl b/lib/kernel/test/inet_SUITE.erl index ce138b6804..e5e1794514 100644 --- a/lib/kernel/test/inet_SUITE.erl +++ b/lib/kernel/test/inet_SUITE.erl @@ -37,7 +37,8 @@ gethostnative_soft_restart/0, gethostnative_soft_restart/1, gethostnative_debug_level/0, gethostnative_debug_level/1, getif/1, - getif_ifr_name_overflow/1,getservbyname_overflow/1, getifaddrs/1]). + getif_ifr_name_overflow/1,getservbyname_overflow/1, getifaddrs/1, + parse_strict_address/1]). -export([get_hosts/1, get_ipv6_hosts/1, parse_hosts/1, parse_address/1, kill_gethost/0, parallell_gethost/0]). @@ -52,7 +53,7 @@ all() -> t_gethostnative, gethostnative_parallell, cname_loop, gethostnative_debug_level, gethostnative_soft_restart, getif, getif_ifr_name_overflow, getservbyname_overflow, - getifaddrs]. + getifaddrs, parse_strict_address]. groups() -> [{parse, [], [parse_hosts, parse_address]}]. @@ -582,16 +583,16 @@ parse_address(Config) when is_list(Config) -> "fe80::198.168.0.", "fec0::fFfF:127.0.0.1."], t_parse_address - (ipv6_address, + (parse_ipv6_address, V6Strict++V6Sloppy++V6Err++V4Err), t_parse_address - (ipv6strict_address, + (parse_ipv6strict_address, V6Strict++V6Err++V4Err++[S || {_,S} <- V6Sloppy]), t_parse_address - (ipv4_address, + (parse_ipv4_address, V4Strict++V4Sloppy++V4Err++V6Err++[S || {_,S} <- V6Strict]), t_parse_address - (ipv4strict_address, + (parse_ipv4strict_address, V4Strict++V4Err++V6Err++[S || {_,S} <- V4Sloppy++V6Strict]). t_parse_address(Func, []) -> @@ -599,14 +600,16 @@ t_parse_address(Func, []) -> ok; t_parse_address(Func, [{Addr,String}|L]) -> io:format("~p = ~p.~n", [Addr,String]), - {ok,Addr} = inet_parse:Func(String), + {ok,Addr} = inet:Func(String), t_parse_address(Func, L); t_parse_address(Func, [String|L]) -> io:format("~p.~n", [String]), - {error,einval} = inet_parse:Func(String), + {error,einval} = inet:Func(String), t_parse_address(Func, L). - +parse_strict_address(Config) when is_list(Config) -> + {ok, Ipv4} = inet:parse_strict_address("127.0.0.1"), + {ok, Ipv6} = inet:parse_strict_address("c11:0c22:5c33:c440:55c0:c66c:77:0088"). t_gethostnative(suite) ->[]; t_gethostnative(doc) ->[]; diff --git a/lib/kernel/test/interactive_shell_SUITE.erl b/lib/kernel/test/interactive_shell_SUITE.erl index da57867a54..36e13cec26 100644 --- a/lib/kernel/test/interactive_shell_SUITE.erl +++ b/lib/kernel/test/interactive_shell_SUITE.erl @@ -30,19 +30,10 @@ init_per_testcase(_Func, Config) -> Dog = test_server:timetrap(test_server:minutes(3)), - Term = case os:getenv("TERM") of - List when is_list(List) -> - List; - _ -> - "dumb" - end, - os:putenv("TERM","vt100"), - [{watchdog,Dog},{term,Term}|Config]. + [{watchdog,Dog}|Config]. end_per_testcase(_Func, Config) -> Dog = ?config(watchdog, Config), - Term = ?config(term,Config), - os:putenv("TERM",Term), test_server:timetrap_cancel(Dog). @@ -56,9 +47,19 @@ groups() -> []. init_per_suite(Config) -> - Config. + Term = case os:getenv("TERM") of + List when is_list(List) -> + List; + _ -> + "dumb" + end, + os:putenv("TERM","vt100"), + DefShell = get_default_shell(), + [{default_shell,DefShell},{term,Term}|Config]. -end_per_suite(_Config) -> +end_per_suite(Config) -> + Term = ?config(term,Config), + os:putenv("TERM",Term), ok. init_per_group(_GroupName, Config) -> @@ -78,70 +79,118 @@ end_per_group(_GroupName, Config) -> get_columns_and_rows(suite) -> []; get_columns_and_rows(doc) -> ["Test that the shell can access columns and rows"]; get_columns_and_rows(Config) when is_list(Config) -> - ?line rtnode([{putline,""}, - {putline, "2."}, - {getline, "2"}, - {putline,"io:columns()."}, -%% Behaviour change in R12B-5, returns 80 -%% {getline,"{error,enotsup}"}, - {getline,"{ok,80}"}, - {putline,"io:rows()."}, -%% Behaviour change in R12B-5, returns 24 -%% {getline,"{error,enotsup}"} - {getline,"{ok,24}"} - ],[]), - ?line rtnode([{putline,""}, - {putline, "2."}, - {getline, "2"}, - {putline,"io:columns()."}, - {getline,"{ok,90}"}, - {putline,"io:rows()."}, - {getline,"{ok,40}"}], - [], - "stty rows 40; stty columns 90; "). + case proplists:get_value(default_shell,Config) of + old -> + %% Old shell tests + ?dbg(old_shell), + ?line rtnode([{putline,""}, + {putline, "2."}, + {getline, "2"}, + {putline,"io:columns()."}, + {getline_re,".*{error,enotsup}"}, + {putline,"io:rows()."}, + {getline_re,".*{error,enotsup}"} + + ],[]), + ?line rtnode([{putline,""}, + {putline, "2."}, + {getline, "2"}, + {putline,"io:columns()."}, + {getline_re,".*{ok,90}"}, + {putline,"io:rows()."}, + {getline_re,".*{ok,40}"}], + [], + "stty rows 40; stty columns 90; "); + new -> + % New shell tests + ?dbg(new_shell), + ?line rtnode([{putline,""}, + {putline, "2."}, + {getline, "2"}, + {putline,"io:columns()."}, + %% Behaviour change in R12B-5, returns 80 + %% {getline,"{error,enotsup}"}, + {getline,"{ok,80}"}, + {putline,"io:rows()."}, + %% Behaviour change in R12B-5, returns 24 + %% {getline,"{error,enotsup}"} + {getline,"{ok,24}"} + ],[]), + ?line rtnode([{putline,""}, + {putline, "2."}, + {getline, "2"}, + {putline,"io:columns()."}, + {getline,"{ok,90}"}, + {putline,"io:rows()."}, + {getline,"{ok,40}"}], + [], + "stty rows 40; stty columns 90; ") + end. exit_initial(suite) -> []; exit_initial(doc) -> ["Tests that exit of initial shell restarts shell"]; exit_initial(Config) when is_list(Config) -> - ?line rtnode([{putline,""}, - {putline, "2."}, - {getline, "2"}, - {putline,"exit()."}, - {getline,""}, - {getline,"Eshell"}, - {putline,""}, - {putline,"35."}, - {getline,"35"}],[]). + case proplists:get_value(default_shell,Config) of + old -> + rtnode([{putline,""}, + {putline, "2."}, + {getline_re, ".*2"}, + {putline,"exit()."}, + {getline,""}, + {getline,"Eshell"}, + {putline,""}, + {putline,"35."}, + {getline_re,".*35"}],[]); + new -> + rtnode([{putline,""}, + {putline, "2."}, + {getline, "2"}, + {putline,"exit()."}, + {getline,""}, + {getline,"Eshell"}, + {putline,""}, + {putline,"35."}, + {getline_re,"35"}],[]) + end. job_control_local(suite) -> []; job_control_local(doc) -> [ "Tests that local shell can be " "started by means of job control" ]; job_control_local(Config) when is_list(Config) -> - ?line rtnode([{putline,""}, - {putline, "2."}, - {getline, "2"}, - {putline,[7]}, - {sleep,timeout(short)}, - {putline,""}, - {getline," -->"}, - {putline,"s"}, - {putline,"c"}, - {putline_raw,""}, - {getline,"Eshell"}, - {putline_raw,""}, - {getline,"1>"}, - {putline,"35."}, - {getline,"35"}],[]). + case proplists:get_value(default_shell,Config) of + old -> + %% Old shell tests + {skip,"No new shell found"}; + new -> + %% New shell tests + ?line rtnode([{putline,""}, + {putline, "2."}, + {getline, "2"}, + {putline,[7]}, + {sleep,timeout(short)}, + {putline,""}, + {getline," -->"}, + {putline,"s"}, + {putline,"c"}, + {putline_raw,""}, + {getline,"Eshell"}, + {putline_raw,""}, + {getline,"1>"}, + {putline,"35."}, + {getline,"35"}],[]) + end. job_control_remote(suite) -> []; job_control_remote(doc) -> [ "Tests that remote shell can be " "started by means of job control" ]; job_control_remote(Config) when is_list(Config) -> - case node() of - nonode@nohost -> + case {node(),proplists:get_value(default_shell,Config)} of + {nonode@nohost,_} -> ?line exit(not_distributed); + {_,old} -> + {skip,"No new shell found"}; _ -> ?line RNode = create_nodename(), ?line MyNode = atom_to_list(node()), @@ -190,9 +239,11 @@ job_control_remote_noshell(doc) -> [ "Tests that remote shell can be " "started by means of job control to -noshell node" ]; job_control_remote_noshell(Config) when is_list(Config) -> - case node() of - nonode@nohost -> + case {node(),proplists:get_value(default_shell,Config)} of + {nonode@nohost,_} -> ?line exit(not_distributed); + {_,old} -> + {skip,"No new shell found"}; _ -> ?line RNode = create_nodename(), ?line NSNode = start_noshell_node(interactive_shell_noshell), @@ -351,6 +402,33 @@ get_and_put(CPid, [{getline, Match}|T],N) -> end end; +%% Hey ho copy paste from stdlib/io_proto_SUITE +get_and_put(CPid, [{getline_re, Match}|T],N) -> + ?dbg({getline_re, Match}), + CPid ! {self(), {get_line, timeout(normal)}}, + receive + {get_line, timeout} -> + error_logger:error_msg("~p: getline_re timeout waiting for \"~s\" " + "(command number ~p, skipped: ~p)~n", + [?MODULE, Match,N,get(getline_skipped)]), + {error, timeout}; + {get_line, Data} -> + ?dbg({data,Data}), + case re:run(Data, Match,[{capture,none}]) of + match -> + erase(getline_skipped), + get_and_put(CPid, T,N+1); + _ -> + case get(getline_skipped) of + undefined -> + put(getline_skipped,[Data]); + List -> + put(getline_skipped,List ++ [Data]) + end, + get_and_put(CPid, [{getline_re, Match}|T],N) + end + end; + get_and_put(CPid, [{putline_raw, Line}|T],N) -> ?dbg({putline_raw, Line}), CPid ! {self(), {send_line, Line}}, @@ -631,6 +709,13 @@ get_data_within(Port, Timeout, Acc) -> timeout end. - - - +get_default_shell() -> + try + rtnode([{putline,""}, + {putline, "whereis(user_drv)."}, + {getline, "undefined"}],[]), + old + catch E:R -> + ?dbg({E,R}), + new + end. diff --git a/lib/kernel/test/kernel.cover b/lib/kernel/test/kernel.cover index f6967ca651..af1dd7eaad 100644 --- a/lib/kernel/test/kernel.cover +++ b/lib/kernel/test/kernel.cover @@ -1,3 +1,3 @@ %% -*- erlang -*- -{incl_mods,[gen_udp,inet6_udp,inet_res,inet_dns]}. +{incl_app,kernel,details}. diff --git a/lib/kernel/test/wrap_log_reader_SUITE.erl b/lib/kernel/test/wrap_log_reader_SUITE.erl index 96dc3e6d33..16b3a7cc1e 100644 --- a/lib/kernel/test/wrap_log_reader_SUITE.erl +++ b/lib/kernel/test/wrap_log_reader_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 1998-2011. All Rights Reserved. +%% Copyright Ericsson AB 1998-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -557,7 +557,7 @@ rec(M, Where) -> M -> ok; Else -> ?t:fail({error, {Where, Else}}) - after 1000 -> ?t:fail({error, {Where, time_out}}) + after 5000 -> ?t:fail({error, {Where, time_out}}) end. pps() -> diff --git a/lib/megaco/doc/src/megaco_encode.xml b/lib/megaco/doc/src/megaco_encode.xml index 410e4f3b31..4a9d63c2e3 100644 --- a/lib/megaco/doc/src/megaco_encode.xml +++ b/lib/megaco/doc/src/megaco_encode.xml @@ -224,22 +224,11 @@ messages.</p> </item> <item> - <p>megaco_ber_bin_encoder - encode/decode ASN.1 BER - messages. This encoder uses ASN.1 ber_bin which - has been optimized using the bit syntax.</p> - </item> - <item> <p>megaco_per_encoder - encode/decode ASN.1 PER messages. N.B. that this format is not included in the Megaco standard.</p> </item> <item> - <p>megaco_per_bin_encoder - encode/decode ASN.1 PER - messages. N.B. that this format is not included in the - Megaco standard. This encoder uses ASN.1 per_bin which - has been optimized using the bit syntax.</p> - </item> - <item> <p>megaco_erl_dist_encoder - encodes messages into Erlangs distribution format. It is rather verbose but encoding and decoding is blinding fast. N.B. that this format is not @@ -370,18 +359,6 @@ needs to be specified.</p> <list type="bulleted"> <item> - <p><c><![CDATA[[driver|_]]]></c> - make use of the asn1 driver for decode - (ber_bin) and encode (per_bin). This option is only available for - encoding modules: <c><![CDATA[megaco_binary_encoder]]></c>, - <c><![CDATA[megaco_ber_bin_encoder]]></c> and <c><![CDATA[megaco_per_bin_encoder]]></c>.</p> - <p>If this option is present in the encoding config, it <em>must</em> - to be the <em>first</em>, unless the - <seealso marker="#handling_versions">version3</seealso> encoding - config is present, in which case it must come second, after - the version3 encoding config, - e.g. <c><![CDATA[[{version3,prev3b},driver]]]></c>.</p> - </item> - <item> <p><c><![CDATA[[native]]]></c> - skips the transformation phase, i.e. the decoded message(s) will not be transformed into our internal form.</p> diff --git a/lib/megaco/examples/meas/megaco_codec_meas.erl b/lib/megaco/examples/meas/megaco_codec_meas.erl index 51ee396338..65b986ccd1 100644 --- a/lib/megaco/examples/meas/megaco_codec_meas.erl +++ b/lib/megaco/examples/meas/megaco_codec_meas.erl @@ -176,7 +176,7 @@ display_megaco_info() -> io:format("Megaco version: ~s (~s)~n", [Ver, FlexStr]). display_asn1_info() -> - AI = megaco_ber_bin_drv_media_gateway_control_v1:info(), + AI = megaco_ber_media_gateway_control_v1:info(), Vsn = case lists:keysearch(vsn, 1, AI) of {value, {vsn, V}} when is_atom(V) -> @@ -281,15 +281,11 @@ expand_codec(Codec) -> [{Codec, megaco_compact_text_encoder, [flex_scanner], 3000}, {Codec, megaco_compact_text_encoder, [], 1500}]; ber -> - [{Codec, megaco_ber_bin_encoder, [driver,native], 4000}, - {Codec, megaco_ber_bin_encoder, [native], 3000}, - {Codec, megaco_ber_bin_encoder, [driver], 3000}, - {Codec, megaco_ber_bin_encoder, [], 1000}]; + [{Codec, megaco_ber_encoder, [native], 3000}, + {Codec, megaco_ber_encoder, [], 1000}]; per -> - [{Codec, megaco_per_bin_encoder, [driver,native], 4000}, - {Codec, megaco_per_bin_encoder, [native], 3000}, - {Codec, megaco_per_bin_encoder, [driver], 3000}, - {Codec, megaco_per_bin_encoder, [], 1000}]; + [{Codec, megaco_per_encoder, [native], 3000}, + {Codec, megaco_per_encoder, [], 1000}]; erlang -> [ {Codec, megaco_erl_dist_encoder, [megaco_compressed,compressed], 500}, diff --git a/lib/megaco/examples/meas/megaco_codec_mstone_lib.erl b/lib/megaco/examples/meas/megaco_codec_mstone_lib.erl index 9af88d9f50..b527ff2e89 100644 --- a/lib/megaco/examples/meas/megaco_codec_mstone_lib.erl +++ b/lib/megaco/examples/meas/megaco_codec_mstone_lib.erl @@ -268,7 +268,7 @@ display_megaco_info() -> io:format("Megaco version: ~s~n", [Ver]). display_asn1_info() -> - AI = megaco_ber_bin_drv_media_gateway_control_v1:info(), + AI = megaco_ber__media_gateway_control_v1:info(), Vsn = case lists:keysearch(vsn, 1, AI) of {value, {vsn, V}} when is_atom(V) -> @@ -361,15 +361,11 @@ expand_codec(Codec, only_drv) -> [{Codec, megaco_compact_text_encoder, [flex_scanner]}, {Codec, megaco_compact_text_encoder, [flex_scanner]}]; ber -> - [{Codec, megaco_ber_bin_encoder, [driver,native]}, - {Codec, megaco_ber_bin_encoder, [driver]}, - {Codec, megaco_ber_bin_encoder, [driver,native]}, - {Codec, megaco_ber_bin_encoder, [driver]}]; + [{Codec, megaco_ber_encoder, [native]}, + {Codec, megaco_ber_encoder, []}]; per -> - [{Codec, megaco_per_bin_encoder, [driver,native]}, - {Codec, megaco_per_bin_encoder, [native]}, - {Codec, megaco_per_bin_encoder, [driver,native]}, - {Codec, megaco_per_bin_encoder, [native]}]; + [{Codec, megaco_per_encoder, [native]}, + {Codec, megaco_per_encoder, []}]; erlang -> Encoder = megaco_erl_dist_encoder, [ @@ -390,15 +386,11 @@ expand_codec(Codec, no_drv) -> [{Codec, megaco_compact_text_encoder, []}, {Codec, megaco_compact_text_encoder, []}]; ber -> - [{Codec, megaco_ber_bin_encoder, [native]}, - {Codec, megaco_ber_bin_encoder, []}, - {Codec, megaco_ber_bin_encoder, [native]}, - {Codec, megaco_ber_bin_encoder, []}]; + [{Codec, megaco_ber_encoder, [native]}, + {Codec, megaco_ber_encoder, []}]; per -> - [{Codec, megaco_per_bin_encoder, [native]}, - {Codec, megaco_per_bin_encoder, []}, - {Codec, megaco_per_bin_encoder, [native]}, - {Codec, megaco_per_bin_encoder, []}]; + [{Codec, megaco_per_encoder, [native]}, + {Codec, megaco_per_encoder, []}]; erlang -> Encoder = megaco_erl_dist_encoder, [ @@ -419,15 +411,11 @@ expand_codec(Codec, _) -> [{Codec, megaco_compact_text_encoder, [flex_scanner]}, {Codec, megaco_compact_text_encoder, []}]; ber -> - [{Codec, megaco_ber_bin_encoder, [driver,native]}, - {Codec, megaco_ber_bin_encoder, [native]}, - {Codec, megaco_ber_bin_encoder, [driver]}, - {Codec, megaco_ber_bin_encoder, []}]; + [{Codec, megaco_ber_encoder, [native]}, + {Codec, megaco_ber_encoder, []}]; per -> - [{Codec, megaco_per_bin_encoder, [driver,native]}, - {Codec, megaco_per_bin_encoder, [native]}, - {Codec, megaco_per_bin_encoder, [driver]}, - {Codec, megaco_per_bin_encoder, []}]; + [{Codec, megaco_per_encoder, [native]}, + {Codec, megaco_per_encoder, []}]; erlang -> Encoder = megaco_erl_dist_encoder, [ diff --git a/lib/megaco/examples/meas/megaco_codec_transform.erl b/lib/megaco/examples/meas/megaco_codec_transform.erl index cfe832ff26..15db165566 100644 --- a/lib/megaco/examples/meas/megaco_codec_transform.erl +++ b/lib/megaco/examples/meas/megaco_codec_transform.erl @@ -213,11 +213,11 @@ decode_message(compact, BinMsg) -> Conf = [{version3,?V3}], do_decode(Mod, Conf, BinMsg); decode_message(ber, BinMsg) -> - Mod = megaco_ber_bin_encoder, + Mod = megaco_ber_encoder, Conf = [{version3,?V3}], do_decode(Mod, Conf, BinMsg); decode_message(per, BinMsg) -> - Mod = megaco_per_bin_encoder, + Mod = megaco_per_encoder, Conf = [{version3,?V3}], do_decode(Mod, Conf, BinMsg); decode_message(erlang, BinMsg) -> diff --git a/lib/megaco/src/app/megaco.app.src b/lib/megaco/src/app/megaco.app.src index c0d8218ac8..0ba2a866f9 100644 --- a/lib/megaco/src/app/megaco.app.src +++ b/lib/megaco/src/app/megaco.app.src @@ -23,19 +23,6 @@ {modules, [ megaco, - megaco_ber_bin_encoder, - megaco_ber_bin_drv_media_gateway_control_v1, - megaco_ber_bin_drv_media_gateway_control_v2, - megaco_ber_bin_drv_media_gateway_control_prev3a, - megaco_ber_bin_drv_media_gateway_control_prev3b, - megaco_ber_bin_drv_media_gateway_control_prev3c, - megaco_ber_bin_drv_media_gateway_control_v3, - megaco_ber_bin_media_gateway_control_v1, - megaco_ber_bin_media_gateway_control_v2, - megaco_ber_bin_media_gateway_control_prev3a, - megaco_ber_bin_media_gateway_control_prev3b, - megaco_ber_bin_media_gateway_control_prev3c, - megaco_ber_bin_media_gateway_control_v3, megaco_ber_encoder, megaco_ber_media_gateway_control_v1, megaco_ber_media_gateway_control_v2, @@ -87,19 +74,6 @@ megaco_per_media_gateway_control_prev3b, megaco_per_media_gateway_control_prev3c, megaco_per_media_gateway_control_v3, - megaco_per_bin_encoder, - megaco_per_bin_drv_media_gateway_control_v1, - megaco_per_bin_drv_media_gateway_control_v2, - megaco_per_bin_drv_media_gateway_control_prev3a, - megaco_per_bin_drv_media_gateway_control_prev3b, - megaco_per_bin_drv_media_gateway_control_prev3c, - megaco_per_bin_drv_media_gateway_control_v3, - megaco_per_bin_media_gateway_control_v1, - megaco_per_bin_media_gateway_control_v2, - megaco_per_bin_media_gateway_control_prev3a, - megaco_per_bin_media_gateway_control_prev3b, - megaco_per_bin_media_gateway_control_prev3c, - megaco_per_bin_media_gateway_control_v3, megaco_pretty_text_encoder, megaco_pretty_text_encoder_v1, megaco_pretty_text_encoder_v2, diff --git a/lib/megaco/src/binary/Makefile b/lib/megaco/src/binary/Makefile index 695599b9dc..660713605e 100644 --- a/lib/megaco/src/binary/Makefile +++ b/lib/megaco/src/binary/Makefile @@ -50,46 +50,22 @@ ASN1_SPECS = $(ASN1_V1_SPEC) \ ASN1_FILES = $(ASN1_SPECS:%=%.asn) V1_SPECS = $(BER_ASN1_V1_SPEC) \ - $(BER_BIN_ASN1_V1_SPEC) \ - $(BER_BIN_DRV_ASN1_V1_SPEC) \ - $(PER_ASN1_V1_SPEC) \ - $(PER_BIN_ASN1_V1_SPEC) \ - $(PER_BIN_DRV_ASN1_V1_SPEC) + $(PER_ASN1_V1_SPEC) V2_SPECS = $(BER_ASN1_V2_SPEC) \ - $(BER_BIN_ASN1_V2_SPEC) \ - $(BER_BIN_DRV_ASN1_V2_SPEC) \ - $(PER_ASN1_V2_SPEC) \ - $(PER_BIN_ASN1_V2_SPEC) \ - $(PER_BIN_DRV_ASN1_V2_SPEC) + $(PER_ASN1_V2_SPEC) PREV3A_SPECS = $(BER_ASN1_PREV3A_SPEC) \ - $(BER_BIN_ASN1_PREV3A_SPEC) \ - $(BER_BIN_DRV_ASN1_PREV3A_SPEC) \ - $(PER_ASN1_PREV3A_SPEC) \ - $(PER_BIN_ASN1_PREV3A_SPEC) \ - $(PER_BIN_DRV_ASN1_PREV3A_SPEC) + $(PER_ASN1_PREV3A_SPEC) PREV3B_SPECS = $(BER_ASN1_PREV3B_SPEC) \ - $(BER_BIN_ASN1_PREV3B_SPEC) \ - $(BER_BIN_DRV_ASN1_PREV3B_SPEC) \ - $(PER_ASN1_PREV3B_SPEC) \ - $(PER_BIN_ASN1_PREV3B_SPEC) \ - $(PER_BIN_DRV_ASN1_PREV3B_SPEC) + $(PER_ASN1_PREV3B_SPEC) PREV3C_SPECS = $(BER_ASN1_PREV3C_SPEC) \ - $(BER_BIN_ASN1_PREV3C_SPEC) \ - $(BER_BIN_DRV_ASN1_PREV3C_SPEC) \ - $(PER_ASN1_PREV3C_SPEC) \ - $(PER_BIN_ASN1_PREV3C_SPEC) \ - $(PER_BIN_DRV_ASN1_PREV3C_SPEC) + $(PER_ASN1_PREV3C_SPEC) V3_SPECS = $(BER_ASN1_V3_SPEC) \ - $(BER_BIN_ASN1_V3_SPEC) \ - $(BER_BIN_DRV_ASN1_V3_SPEC) \ $(PER_ASN1_V3_SPEC) \ - $(PER_BIN_ASN1_V3_SPEC) \ - $(PER_BIN_DRV_ASN1_V3_SPEC) \ $(PREV3A_SPECS) $(PREV3B_SPECS) $(PREV3C_SPECS) SPECS = $(V1_SPECS) $(V2_SPECS) $(V3_SPECS) diff --git a/lib/megaco/src/binary/depend.mk b/lib/megaco/src/binary/depend.mk index c9ca34bcf6..a1318079be 100644 --- a/lib/megaco/src/binary/depend.mk +++ b/lib/megaco/src/binary/depend.mk @@ -19,17 +19,8 @@ # Flag description: # -# +optimize -# For ber_bin this means "optimize" (whatever that is), -# but for per_bin it means that a stage in the encode -# is done in the asn1 driver. -# -# +nif -# For ber_bin this means that part of the decode is done -# in the asn1 nif. -# # +asn1config -# This is only used by the ber_bin, and means that +# This is only used by the ber, and means that # some partial decode functions will be created # (as described by the asn1config file). # @@ -43,42 +34,18 @@ ifeq ($(MEGACO_INLINE_ASN1_RT),true) ASN1_CT_OPTS += +inline endif -BER_V1_FLAGS = $(ASN1_CT_OPTS) -BER_BIN_V1_FLAGS = $(ASN1_CT_OPTS) +asn1config +optimize -BER_BIN_DRV_V1_FLAGS = $(ASN1_CT_OPTS) +asn1config +optimize +nif -BER_V2_FLAGS = $(ASN1_CT_OPTS) -BER_BIN_V2_FLAGS = $(ASN1_CT_OPTS) +asn1config +optimize -BER_BIN_DRV_V2_FLAGS = $(ASN1_CT_OPTS) +asn1config +optimize +nif -BER_PREV3A_FLAGS = $(ASN1_CT_OPTS) -BER_BIN_PREV3A_FLAGS = $(ASN1_CT_OPTS) +asn1config +optimize -BER_BIN_DRV_PREV3A_FLAGS = $(ASN1_CT_OPTS) +asn1config +optimize +nif -BER_PREV3B_FLAGS = $(ASN1_CT_OPTS) -BER_BIN_PREV3B_FLAGS = $(ASN1_CT_OPTS) +asn1config +optimize -BER_BIN_DRV_PREV3B_FLAGS = $(ASN1_CT_OPTS) +asn1config +optimize +nif -BER_PREV3C_FLAGS = $(ASN1_CT_OPTS) -BER_BIN_PREV3C_FLAGS = $(ASN1_CT_OPTS) +asn1config +optimize -BER_BIN_DRV_PREV3C_FLAGS = $(ASN1_CT_OPTS) +asn1config +optimize +nif -BER_V3_FLAGS = $(ASN1_CT_OPTS) -BER_BIN_V3_FLAGS = $(ASN1_CT_OPTS) +asn1config +optimize -BER_BIN_DRV_V3_FLAGS = $(ASN1_CT_OPTS) +asn1config +optimize +nif +BER_V1_FLAGS = $(ASN1_CT_OPTS) +asn1config +BER_V2_FLAGS = $(ASN1_CT_OPTS) +asn1config +BER_PREV3A_FLAGS = $(ASN1_CT_OPTS) +asn1config +BER_PREV3B_FLAGS = $(ASN1_CT_OPTS) +asn1config +BER_PREV3C_FLAGS = $(ASN1_CT_OPTS) +asn1config +BER_V3_FLAGS = $(ASN1_CT_OPTS) +asn1config PER_V1_FLAGS = $(ASN1_CT_OPTS) -PER_BIN_V1_FLAGS = $(ASN1_CT_OPTS) -PER_BIN_DRV_V1_FLAGS = $(ASN1_CT_OPTS) +optimize PER_V2_FLAGS = $(ASN1_CT_OPTS) -PER_BIN_V2_FLAGS = $(ASN1_CT_OPTS) -PER_BIN_DRV_V2_FLAGS = $(ASN1_CT_OPTS) +optimize PER_PREV3A_FLAGS = $(ASN1_CT_OPTS) -PER_BIN_PREV3A_FLAGS = $(ASN1_CT_OPTS) -PER_BIN_DRV_PREV3A_FLAGS = $(ASN1_CT_OPTS) +optimize PER_PREV3B_FLAGS = $(ASN1_CT_OPTS) -PER_BIN_PREV3B_FLAGS = $(ASN1_CT_OPTS) -PER_BIN_DRV_PREV3B_FLAGS = $(ASN1_CT_OPTS) +optimize PER_PREV3C_FLAGS = $(ASN1_CT_OPTS) -PER_BIN_PREV3C_FLAGS = $(ASN1_CT_OPTS) -PER_BIN_DRV_PREV3C_FLAGS = $(ASN1_CT_OPTS) +optimize PER_V3_FLAGS = $(ASN1_CT_OPTS) -PER_BIN_V3_FLAGS = $(ASN1_CT_OPTS) -PER_BIN_DRV_V3_FLAGS = $(ASN1_CT_OPTS) +optimize # --- Version 1 --- @@ -92,26 +59,6 @@ $(BER_ASN1_V1_SPEC).erl: \ $(EBIN)/$(BER_ASN1_V1_SPEC).$(EMULATOR): \ $(BER_ASN1_V1_SPEC).erl -$(BER_BIN_ASN1_V1_SPEC).erl: \ - $(BER_BIN_ASN1_V1_SPEC).set.asn \ - $(BER_BIN_ASN1_V1_SPEC).asn1config \ - $(ASN1_V1_SPEC).asn - @echo "$(BER_BIN_ASN1_V1_SPEC):" - $(ERLC) -bber_bin $(BER_BIN_V1_FLAGS) $(BER_BIN_ASN1_V1_SPEC).set.asn - -$(EBIN)/$(BER_BIN_ASN1_V1_SPEC).$(EMULATOR): \ - $(BER_BIN_ASN1_V1_SPEC).erl - -$(BER_BIN_DRV_ASN1_V1_SPEC).erl: \ - $(BER_BIN_DRV_ASN1_V1_SPEC).set.asn \ - $(BER_BIN_DRV_ASN1_V1_SPEC).asn1config \ - $(ASN1_V1_SPEC).asn - @echo "$(BER_BIN_DRV_ASN1_V1_SPEC):" - $(ERLC) -bber_bin $(BER_BIN_DRV_V1_FLAGS) $(BER_BIN_DRV_ASN1_V1_SPEC).set.asn - -$(EBIN)/$(BER_BIN_DRV_ASN1_V1_SPEC).$(EMULATOR): \ - $(BER_BIN_DRV_ASN1_V1_SPEC).erl - $(PER_ASN1_V1_SPEC).erl: \ $(PER_ASN1_V1_SPEC).set.asn \ $(ASN1_V1_SPEC).asn @@ -121,24 +68,6 @@ $(PER_ASN1_V1_SPEC).erl: \ $(EBIN)/$(PER_ASN1_V1_SPEC).$(EMULATOR): \ $(PER_ASN1_V1_SPEC).erl -$(PER_BIN_ASN1_V1_SPEC).erl: \ - $(PER_BIN_ASN1_V1_SPEC).set.asn \ - $(ASN1_V1_SPEC).asn - @echo "$(PER_BIN_ASN1_V1_SPEC):" - $(ERLC) -bper_bin $(PER_BIN_V1_FLAGS) $(PER_BIN_ASN1_V1_SPEC).set.asn - -$(EBIN)/$(PER_BIN_ASN1_V1_SPEC).$(EMULATOR): \ - $(PER_BIN_ASN1_V1_SPEC).erl - -$(PER_BIN_DRV_ASN1_V1_SPEC).erl: \ - $(PER_BIN_DRV_ASN1_V1_SPEC).set.asn \ - $(ASN1_V1_SPEC).asn - @echo "$(PER_BIN_DRV_ASN1_V1_SPEC):" - $(ERLC) -bper_bin $(PER_BIN_DRV_V1_FLAGS) $(PER_BIN_DRV_ASN1_V1_SPEC).set.asn - -$(EBIN)/$(PER_BIN_DRV_ASN1_V1_SPEC).$(EMULATOR): \ - $(PER_BIN_DRV_ASN1_V1_SPEC).erl - # --- Version 2 --- @@ -151,26 +80,6 @@ $(BER_ASN1_V2_SPEC).erl: \ $(EBIN)/$(BER_ASN1_V2_SPEC).$(EMULATOR): \ $(BER_ASN1_V2_SPEC).erl -$(BER_BIN_ASN1_V2_SPEC).erl: \ - $(BER_BIN_ASN1_V2_SPEC).set.asn \ - $(BER_BIN_ASN1_V2_SPEC).asn1config \ - $(ASN1_V2_SPEC).asn - @echo "$(BER_BIN_ASN1_V2_SPEC):" - $(ERLC) -bber_bin $(BER_BIN_V2_FLAGS) $(BER_BIN_ASN1_V2_SPEC).set.asn - -$(EBIN)/$(BER_BIN_ASN1_V2_SPEC).$(EMULATOR): \ - $(BER_BIN_ASN1_V2_SPEC).erl - -$(BER_BIN_DRV_ASN1_V2_SPEC).erl: \ - $(BER_BIN_DRV_ASN1_V2_SPEC).set.asn \ - $(BER_BIN_DRV_ASN1_V2_SPEC).asn1config \ - $(ASN1_V2_SPEC).asn - @echo "$(BER_BIN_DRV_ASN1_V2_SPEC):" - $(ERLC) -bber_bin $(BER_BIN_DRV_V2_FLAGS) $(BER_BIN_DRV_ASN1_V2_SPEC).set.asn - -$(EBIN)/$(BER_BIN_DRV_ASN1_V2_SPEC).$(EMULATOR): \ - $(BER_BIN_DRV_ASN1_V2_SPEC).erl - $(PER_ASN1_V2_SPEC).erl: \ $(PER_ASN1_V2_SPEC).set.asn \ $(ASN1_V2_SPEC).asn @@ -180,25 +89,6 @@ $(PER_ASN1_V2_SPEC).erl: \ $(EBIN)/$(PER_ASN1_V2_SPEC).$(EMULATOR): \ $(PER_ASN1_V2_SPEC).erl -$(PER_BIN_ASN1_V2_SPEC).erl: \ - $(PER_BIN_ASN1_V2_SPEC).set.asn \ - $(ASN1_V2_SPEC).asn - @echo "$(PER_BIN_ASN1_V2_SPEC):" - $(ERLC) -bper_bin $(PER_BIN_V2_FLAGS) $(PER_BIN_ASN1_V2_SPEC).set.asn - -$(EBIN)/$(PER_BIN_ASN1_V2_SPEC).$(EMULATOR): \ - $(PER_BIN_ASN1_V2_SPEC).erl - -$(PER_BIN_DRV_ASN1_V2_SPEC).erl: \ - $(PER_BIN_DRV_ASN1_V2_SPEC).set.asn \ - $(ASN1_V2_SPEC).asn - @echo "$(PER_BIN_DRV_ASN1_V2_SPEC):" - $(ERLC) -bper_bin $(PER_BIN_DRV_V2_FLAGS) $(PER_BIN_DRV_ASN1_V2_SPEC).set.asn - -$(EBIN)/$(PER_BIN_DRV_ASN1_V2_SPEC).$(EMULATOR): \ - $(PER_BIN_DRV_ASN1_V2_SPEC).erl - - # --- Version 3 --- # -- (prev3a) -- @@ -212,26 +102,6 @@ $(BER_ASN1_PREV3A_SPEC).erl: \ $(EBIN)/$(BER_ASN1_PREV3A_SPEC).$(EMULATOR): \ $(BER_ASN1_PREV3A_SPEC).erl -$(BER_BIN_ASN1_PREV3A_SPEC).erl: \ - $(BER_BIN_ASN1_PREV3A_SPEC).set.asn \ - $(BER_BIN_ASN1_PREV3A_SPEC).asn1config \ - $(ASN1_PREV3A_SPEC).asn - @echo "$(BER_BIN_ASN1_PREV3A_SPEC):" - $(ERLC) -bber_bin $(BER_BIN_PREV3A_FLAGS) $(BER_BIN_ASN1_PREV3A_SPEC).set.asn - -$(EBIN)/$(BER_BIN_ASN1_PREV3A_SPEC).$(EMULATOR): \ - $(BER_BIN_ASN1_PREV3A_SPEC).erl - -$(BER_BIN_DRV_ASN1_PREV3A_SPEC).erl: \ - $(BER_BIN_DRV_ASN1_PREV3A_SPEC).set.asn \ - $(BER_BIN_DRV_ASN1_PREV3A_SPEC).asn1config \ - $(ASN1_PREV3A_SPEC).asn - @echo "$(BER_BIN_DRV_ASN1_PREV3A_SPEC):" - $(ERLC) -bber_bin $(BER_BIN_DRV_PREV3A_FLAGS) $(BER_BIN_DRV_ASN1_PREV3A_SPEC).set.asn - -$(EBIN)/$(BER_BIN_DRV_ASN1_PREV3A_SPEC).$(EMULATOR): \ - $(BER_BIN_DRV_ASN1_PREV3A_SPEC).erl - $(PER_ASN1_PREV3A_SPEC).erl: \ $(PER_ASN1_PREV3A_SPEC).set.asn \ $(ASN1_PREV3A_SPEC).asn @@ -241,23 +111,6 @@ $(PER_ASN1_PREV3A_SPEC).erl: \ $(EBIN)/$(PER_ASN1_PREV3A_SPEC).$(EMULATOR): \ $(PER_ASN1_PREV3A_SPEC).erl -$(PER_BIN_ASN1_PREV3A_SPEC).erl: \ - $(PER_BIN_ASN1_PREV3A_SPEC).set.asn \ - $(ASN1_PREV3A_SPEC).asn - @echo "$(PER_BIN_ASN1_PREV3A_SPEC):" - $(ERLC) -bper_bin $(PER_BIN_PREV3A_FLAGS) $(PER_BIN_ASN1_PREV3A_SPEC).set.asn - -$(EBIN)/$(PER_BIN_ASN1_PREV3A_SPEC).$(EMULATOR): \ - $(PER_BIN_ASN1_PREV3A_SPEC).erl - -$(PER_BIN_DRV_ASN1_PREV3A_SPEC).erl: \ - $(PER_BIN_DRV_ASN1_PREV3A_SPEC).set.asn \ - $(ASN1_PREV3A_SPEC).asn - @echo "$(PER_BIN_DRV_ASN1_PREV3A_SPEC):" - $(ERLC) -bper_bin $(PER_BIN_DRV_PREV3A_FLAGS) $(PER_BIN_DRV_ASN1_PREV3A_SPEC).set.asn - -$(EBIN)/$(PER_BIN_DRV_ASN1_PREV3A_SPEC).$(EMULATOR): \ - $(PER_BIN_DRV_ASN1_PREV3A_SPEC).erl # -- (prev3b) -- @@ -270,26 +123,6 @@ $(BER_ASN1_PREV3B_SPEC).erl: \ $(EBIN)/$(BER_ASN1_PREV3B_SPEC).$(EMULATOR): \ $(BER_ASN1_PREV3B_SPEC).erl -$(BER_BIN_ASN1_PREV3B_SPEC).erl: \ - $(BER_BIN_ASN1_PREV3B_SPEC).set.asn \ - $(BER_BIN_ASN1_PREV3B_SPEC).asn1config \ - $(ASN1_PREV3B_SPEC).asn - @echo "$(BER_BIN_ASN1_PREV3B_SPEC):" - $(ERLC) -bber_bin $(BER_BIN_PREV3B_FLAGS) $(BER_BIN_ASN1_PREV3B_SPEC).set.asn - -$(EBIN)/$(BER_BIN_ASN1_PREV3B_SPEC).$(EMULATOR): \ - $(BER_BIN_ASN1_PREV3B_SPEC).erl - -$(BER_BIN_DRV_ASN1_PREV3B_SPEC).erl: \ - $(BER_BIN_DRV_ASN1_PREV3B_SPEC).set.asn \ - $(BER_BIN_DRV_ASN1_PREV3B_SPEC).asn1config \ - $(ASN1_PREV3B_SPEC).asn - @echo "$(BER_BIN_DRV_ASN1_PREV3B_SPEC):" - $(ERLC) -bber_bin $(BER_BIN_DRV_PREV3B_FLAGS) $(BER_BIN_DRV_ASN1_PREV3B_SPEC).set.asn - -$(EBIN)/$(BER_BIN_DRV_ASN1_PREV3B_SPEC).$(EMULATOR): \ - $(BER_BIN_DRV_ASN1_PREV3B_SPEC).erl - $(PER_ASN1_PREV3B_SPEC).erl: \ $(PER_ASN1_PREV3B_SPEC).set.asn \ $(ASN1_PREV3B_SPEC).asn @@ -299,24 +132,6 @@ $(PER_ASN1_PREV3B_SPEC).erl: \ $(EBIN)/$(PER_ASN1_PREV3B_SPEC).$(EMULATOR): \ $(PER_ASN1_PREV3B_SPEC).erl -$(PER_BIN_ASN1_PREV3B_SPEC).erl: \ - $(PER_BIN_ASN1_PREV3B_SPEC).set.asn \ - $(ASN1_PREV3B_SPEC).asn - @echo "$(PER_BIN_ASN1_PREV3B_SPEC):" - $(ERLC) -bper_bin $(PER_BIN_PREV3B_FLAGS) $(PER_BIN_ASN1_PREV3B_SPEC).set.asn - -$(EBIN)/$(PER_BIN_ASN1_PREV3B_SPEC).$(EMULATOR): \ - $(PER_BIN_ASN1_PREV3B_SPEC).erl - -$(PER_BIN_DRV_ASN1_PREV3B_SPEC).erl: \ - $(PER_BIN_DRV_ASN1_PREV3B_SPEC).set.asn \ - $(ASN1_PREV3B_SPEC).asn - @echo "$(PER_BIN_DRV_ASN1_PREV3B_SPEC):" - $(ERLC) -bper_bin $(PER_BIN_DRV_PREV3B_FLAGS) $(PER_BIN_DRV_ASN1_PREV3B_SPEC).set.asn - -$(EBIN)/$(PER_BIN_DRV_ASN1_PREV3B_SPEC).$(EMULATOR): \ - $(PER_BIN_DRV_ASN1_PREV3B_SPEC).erl - # -- (prev3c) -- @@ -329,26 +144,6 @@ $(BER_ASN1_PREV3C_SPEC).erl: \ $(EBIN)/$(BER_ASN1_PREV3C_SPEC).$(EMULATOR): \ $(BER_ASN1_PREV3C_SPEC).erl -$(BER_BIN_ASN1_PREV3C_SPEC).erl: \ - $(BER_BIN_ASN1_PREV3C_SPEC).set.asn \ - $(BER_BIN_ASN1_PREV3C_SPEC).asn1config \ - $(ASN1_PREV3C_SPEC).asn - @echo "$(BER_BIN_ASN1_PREV3C_SPEC):" - $(ERLC) -bber_bin $(BER_BIN_PREV3C_FLAGS) $(BER_BIN_ASN1_PREV3C_SPEC).set.asn - -$(EBIN)/$(BER_BIN_ASN1_PREV3C_SPEC).$(EMULATOR): \ - $(BER_BIN_ASN1_PREV3C_SPEC).erl - -$(BER_BIN_DRV_ASN1_PREV3C_SPEC).erl: \ - $(BER_BIN_DRV_ASN1_PREV3C_SPEC).set.asn \ - $(BER_BIN_DRV_ASN1_PREV3C_SPEC).asn1config \ - $(ASN1_PREV3C_SPEC).asn - @echo "$(BER_BIN_DRV_ASN1_PREV3C_SPEC):" - $(ERLC) -bber_bin $(BER_BIN_DRV_PREV3C_FLAGS) $(BER_BIN_DRV_ASN1_PREV3C_SPEC).set.asn - -$(EBIN)/$(BER_BIN_DRV_ASN1_PREV3C_SPEC).$(EMULATOR): \ - $(BER_BIN_DRV_ASN1_PREV3C_SPEC).erl - $(PER_ASN1_PREV3C_SPEC).erl: \ $(PER_ASN1_PREV3C_SPEC).set.asn \ $(ASN1_PREV3C_SPEC).asn @@ -358,24 +153,6 @@ $(PER_ASN1_PREV3C_SPEC).erl: \ $(EBIN)/$(PER_ASN1_PREV3C_SPEC).$(EMULATOR): \ $(PER_ASN1_PREV3C_SPEC).erl -$(PER_BIN_ASN1_PREV3C_SPEC).erl: \ - $(PER_BIN_ASN1_PREV3C_SPEC).set.asn \ - $(ASN1_PREV3C_SPEC).asn - @echo "$(PER_BIN_ASN1_PREV3C_SPEC):" - $(ERLC) -bper_bin $(PER_BIN_PREV3C_FLAGS) $(PER_BIN_ASN1_PREV3C_SPEC).set.asn - -$(EBIN)/$(PER_BIN_ASN1_PREV3C_SPEC).$(EMULATOR): \ - $(PER_BIN_ASN1_PREV3C_SPEC).erl - -$(PER_BIN_DRV_ASN1_PREV3C_SPEC).erl: \ - $(PER_BIN_DRV_ASN1_PREV3C_SPEC).set.asn \ - $(ASN1_PREV3C_SPEC).asn - @echo "$(PER_BIN_DRV_ASN1_PREV3C_SPEC):" - $(ERLC) -bper_bin $(PER_BIN_DRV_PREV3C_FLAGS) $(PER_BIN_DRV_ASN1_PREV3C_SPEC).set.asn - -$(EBIN)/$(PER_BIN_DRV_ASN1_PREV3C_SPEC).$(EMULATOR): \ - $(PER_BIN_DRV_ASN1_PREV3C_SPEC).erl - # -- (v3) -- @@ -388,26 +165,6 @@ $(BER_ASN1_V3_SPEC).erl: \ $(EBIN)/$(BER_ASN1_V3_SPEC).$(EMULATOR): \ $(BER_ASN1_V3_SPEC).erl -$(BER_BIN_ASN1_V3_SPEC).erl: \ - $(BER_BIN_ASN1_V3_SPEC).set.asn \ - $(BER_BIN_ASN1_V3_SPEC).asn1config \ - $(ASN1_V3_SPEC).asn - @echo "$(BER_BIN_ASN1_V3_SPEC):" - $(ERLC) -bber_bin $(BER_BIN_V3_FLAGS) $(BER_BIN_ASN1_V3_SPEC).set.asn - -$(EBIN)/$(BER_BIN_ASN1_V3_SPEC).$(EMULATOR): \ - $(BER_BIN_ASN1_V3_SPEC).erl - -$(BER_BIN_DRV_ASN1_V3_SPEC).erl: \ - $(BER_BIN_DRV_ASN1_V3_SPEC).set.asn \ - $(BER_BIN_DRV_ASN1_V3_SPEC).asn1config \ - $(ASN1_V3_SPEC).asn - @echo "$(BER_BIN_DRV_ASN1_V3_SPEC):" - $(ERLC) -bber_bin $(BER_BIN_DRV_V3_FLAGS) $(BER_BIN_DRV_ASN1_V3_SPEC).set.asn - -$(EBIN)/$(BER_BIN_DRV_ASN1_V3_SPEC).$(EMULATOR): \ - $(BER_BIN_DRV_ASN1_V3_SPEC).erl - $(PER_ASN1_V3_SPEC).erl: \ $(PER_ASN1_V3_SPEC).set.asn \ $(ASN1_V3_SPEC).asn @@ -417,39 +174,15 @@ $(PER_ASN1_V3_SPEC).erl: \ $(EBIN)/$(PER_ASN1_V3_SPEC).$(EMULATOR): \ $(PER_ASN1_V3_SPEC).erl -$(PER_BIN_ASN1_V3_SPEC).erl: \ - $(PER_BIN_ASN1_V3_SPEC).set.asn \ - $(ASN1_V3_SPEC).asn - @echo "$(PER_BIN_ASN1_V3_SPEC):" - $(ERLC) -bper_bin $(PER_BIN_V3_FLAGS) $(PER_BIN_ASN1_V3_SPEC).set.asn - -$(EBIN)/$(PER_BIN_ASN1_V3_SPEC).$(EMULATOR): \ - $(PER_BIN_ASN1_V3_SPEC).erl - -$(PER_BIN_DRV_ASN1_V3_SPEC).erl: \ - $(PER_BIN_DRV_ASN1_V3_SPEC).set.asn \ - $(ASN1_V3_SPEC).asn - @echo "$(PER_BIN_DRV_ASN1_V3_SPEC):" - $(ERLC) -bper_bin $(PER_BIN_DRV_V3_FLAGS) $(PER_BIN_DRV_ASN1_V3_SPEC).set.asn - -$(EBIN)/$(PER_BIN_DRV_ASN1_V3_SPEC).$(EMULATOR): \ - $(PER_BIN_DRV_ASN1_V3_SPEC).erl - # ------------- $(EBIN)/megaco_ber_encoder.$(EMULATOR): megaco_ber_encoder.erl \ $(MEGACO_ENGINEDIR)/megaco_message_internal.hrl -$(EBIN)/megaco_ber_bin_encoder.$(EMULATOR): megaco_ber_bin_encoder.erl \ - $(MEGACO_ENGINEDIR)/megaco_message_internal.hrl - $(EBIN)/megaco_per_encoder.$(EMULATOR): megaco_per_encoder.erl \ $(MEGACO_ENGINEDIR)/megaco_message_internal.hrl -$(EBIN)/megaco_per_bin_encoder.$(EMULATOR): megaco_per_bin_encoder.erl \ - $(MEGACO_ENGINEDIR)/megaco_message_internal.hrl - $(EBIN)/megaco_binary_encoder_lib.$(EMULATOR): megaco_binary_encoder_lib.erl \ $(MEGACO_ENGINEDIR)/megaco_message_internal.hrl diff --git a/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_prev3a.asn1config b/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_prev3a.asn1config deleted file mode 100644 index 179473717d..0000000000 --- a/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_prev3a.asn1config +++ /dev/null @@ -1,43 +0,0 @@ -{exclusive_decode, - {'megaco_ber_bin_drv_media_gateway_control_prev3a', - [ - {decode_message_trans_partial, - [ - 'MegacoMessage',[{mess,[{messageBody,[{transactions,parts}]}]}] - ] - }, - {decode_message_acts_partial, - ['Transaction', - [ - {transactionRequest, - [ - {actions,parts} - ] - }, - {transactionReply, - [ - {transactionResult, [{actionReplies,parts}]} - ] - } - ] - ] - }, - {decode_message_version, - ['MegacoMessage', - [ - {authHeader,undecoded}, - {mess,[{mId,undecoded},{messageBody,undecoded}]} - ] - ] - }, - {decode_message_mId, - ['MegacoMessage', - [ - {authHeader,undecoded}, - {mess,[{messageBody,undecoded}]} - ] - ] - } - ] - } -}. diff --git a/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_prev3a.set.asn b/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_prev3a.set.asn deleted file mode 100644 index b9ba7ffdb4..0000000000 --- a/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_prev3a.set.asn +++ /dev/null @@ -1 +0,0 @@ -MEDIA-GATEWAY-CONTROL-prev3a.asn diff --git a/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_prev3b.asn1config b/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_prev3b.asn1config deleted file mode 100644 index ceda97fbd1..0000000000 --- a/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_prev3b.asn1config +++ /dev/null @@ -1,43 +0,0 @@ -{exclusive_decode, - {'megaco_ber_bin_drv_media_gateway_control_prev3b', - [ - {decode_message_trans_partial, - [ - 'MegacoMessage',[{mess,[{messageBody,[{transactions,parts}]}]}] - ] - }, - {decode_message_acts_partial, - ['Transaction', - [ - {transactionRequest, - [ - {actions,parts} - ] - }, - {transactionReply, - [ - {transactionResult, [{actionReplies,parts}]} - ] - } - ] - ] - }, - {decode_message_version, - ['MegacoMessage', - [ - {authHeader,undecoded}, - {mess,[{mId,undecoded},{messageBody,undecoded}]} - ] - ] - }, - {decode_message_mId, - ['MegacoMessage', - [ - {authHeader,undecoded}, - {mess,[{messageBody,undecoded}]} - ] - ] - } - ] - } -}. diff --git a/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_prev3b.set.asn b/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_prev3b.set.asn deleted file mode 100644 index 0437bde310..0000000000 --- a/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_prev3b.set.asn +++ /dev/null @@ -1 +0,0 @@ -MEDIA-GATEWAY-CONTROL-prev3b.asn diff --git a/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_prev3c.asn1config b/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_prev3c.asn1config deleted file mode 100644 index d181ef44bd..0000000000 --- a/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_prev3c.asn1config +++ /dev/null @@ -1,43 +0,0 @@ -{exclusive_decode, - {'megaco_ber_bin_drv_media_gateway_control_prev3c', - [ - {decode_message_trans_partial, - [ - 'MegacoMessage',[{mess,[{messageBody,[{transactions,parts}]}]}] - ] - }, - {decode_message_acts_partial, - ['Transaction', - [ - {transactionRequest, - [ - {actions,parts} - ] - }, - {transactionReply, - [ - {transactionResult, [{actionReplies,parts}]} - ] - } - ] - ] - }, - {decode_message_version, - ['MegacoMessage', - [ - {authHeader,undecoded}, - {mess,[{mId,undecoded},{messageBody,undecoded}]} - ] - ] - }, - {decode_message_mId, - ['MegacoMessage', - [ - {authHeader,undecoded}, - {mess,[{messageBody,undecoded}]} - ] - ] - } - ] - } -}. diff --git a/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_prev3c.set.asn b/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_prev3c.set.asn deleted file mode 100644 index e78055fbad..0000000000 --- a/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_prev3c.set.asn +++ /dev/null @@ -1 +0,0 @@ -MEDIA-GATEWAY-CONTROL-prev3c.asn diff --git a/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_v1.set.asn b/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_v1.set.asn deleted file mode 100644 index 0f5a92dba1..0000000000 --- a/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_v1.set.asn +++ /dev/null @@ -1 +0,0 @@ -MEDIA-GATEWAY-CONTROL-v1.asn diff --git a/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_v2.asn1config b/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_v2.asn1config deleted file mode 100644 index 3d0cb9a019..0000000000 --- a/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_v2.asn1config +++ /dev/null @@ -1,43 +0,0 @@ -{exclusive_decode, - {'megaco_ber_bin_drv_media_gateway_control_v2', - [ - {decode_message_trans_partial, - [ - 'MegacoMessage',[{mess,[{messageBody,[{transactions,parts}]}]}] - ] - }, - {decode_message_acts_partial, - ['Transaction', - [ - {transactionRequest, - [ - {actions,parts} - ] - }, - {transactionReply, - [ - {transactionResult, [{actionReplies,parts}]} - ] - } - ] - ] - }, - {decode_message_version, - ['MegacoMessage', - [ - {authHeader,undecoded}, - {mess,[{mId,undecoded},{messageBody,undecoded}]} - ] - ] - }, - {decode_message_mId, - ['MegacoMessage', - [ - {authHeader,undecoded}, - {mess,[{messageBody,undecoded}]} - ] - ] - } - ] - } -}. diff --git a/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_v2.set.asn b/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_v2.set.asn deleted file mode 100644 index 7fc82b127f..0000000000 --- a/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_v2.set.asn +++ /dev/null @@ -1 +0,0 @@ -MEDIA-GATEWAY-CONTROL-v2.asn diff --git a/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_v3.asn1config b/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_v3.asn1config deleted file mode 100644 index cc662c0145..0000000000 --- a/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_v3.asn1config +++ /dev/null @@ -1,43 +0,0 @@ -{exclusive_decode, - {'megaco_ber_bin_drv_media_gateway_control_v3', - [ - {decode_message_trans_partial, - [ - 'MegacoMessage',[{mess,[{messageBody,[{transactions,parts}]}]}] - ] - }, - {decode_message_acts_partial, - ['Transaction', - [ - {transactionRequest, - [ - {actions,parts} - ] - }, - {transactionReply, - [ - {transactionResult, [{actionReplies,parts}]} - ] - } - ] - ] - }, - {decode_message_version, - ['MegacoMessage', - [ - {authHeader,undecoded}, - {mess,[{mId,undecoded},{messageBody,undecoded}]} - ] - ] - }, - {decode_message_mId, - ['MegacoMessage', - [ - {authHeader,undecoded}, - {mess,[{messageBody,undecoded}]} - ] - ] - } - ] - } -}. diff --git a/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_v3.set.asn b/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_v3.set.asn deleted file mode 100644 index 1d7950a283..0000000000 --- a/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_v3.set.asn +++ /dev/null @@ -1 +0,0 @@ -MEDIA-GATEWAY-CONTROL-v3.asn diff --git a/lib/megaco/src/binary/megaco_ber_bin_encoder.erl b/lib/megaco/src/binary/megaco_ber_bin_encoder.erl deleted file mode 100644 index bf9926c7e5..0000000000 --- a/lib/megaco/src/binary/megaco_ber_bin_encoder.erl +++ /dev/null @@ -1,716 +0,0 @@ -%% -%% %CopyrightBegin% -%% -%% Copyright Ericsson AB 2000-2009. All Rights Reserved. -%% -%% The contents of this file are subject to the Erlang Public License, -%% Version 1.1, (the "License"); you may not use this file except in -%% compliance with the License. You should have received a copy of the -%% Erlang Public License along with this software. If not, it can be -%% retrieved online at http://www.erlang.org/. -%% -%% Software distributed under the License is distributed on an "AS IS" -%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See -%% the License for the specific language governing rights and limitations -%% under the License. -%% -%% %CopyrightEnd% -%% - -%% -%%---------------------------------------------------------------------- -%% Purpose : Handle ASN.1 BER encoding of Megaco/H.248 -%%---------------------------------------------------------------------- - --module(megaco_ber_bin_encoder). - --behaviour(megaco_encoder). - --export([encode_message/3, decode_message/3, - decode_mini_message/3, - - encode_transaction/3, - encode_action_requests/3, - encode_action_request/3, - encode_action_reply/3, - - version_of/2]). - -%% Backward compatible functions: --export([encode_message/2, decode_message/2]). - --include_lib("megaco/src/engine/megaco_message_internal.hrl"). - --define(V1_ASN1_MOD, megaco_ber_bin_media_gateway_control_v1). --define(V2_ASN1_MOD, megaco_ber_bin_media_gateway_control_v2). --define(V3_ASN1_MOD, megaco_ber_bin_media_gateway_control_v3). --define(PREV3A_ASN1_MOD, megaco_ber_bin_media_gateway_control_prev3a). --define(PREV3B_ASN1_MOD, megaco_ber_bin_media_gateway_control_prev3b). --define(PREV3C_ASN1_MOD, megaco_ber_bin_media_gateway_control_prev3c). --define(V1_ASN1_MOD_DRV, megaco_ber_bin_drv_media_gateway_control_v1). --define(V2_ASN1_MOD_DRV, megaco_ber_bin_drv_media_gateway_control_v2). --define(V3_ASN1_MOD_DRV, megaco_ber_bin_drv_media_gateway_control_v3). --define(PREV3A_ASN1_MOD_DRV, megaco_ber_bin_drv_media_gateway_control_prev3a). --define(PREV3B_ASN1_MOD_DRV, megaco_ber_bin_drv_media_gateway_control_prev3b). --define(PREV3C_ASN1_MOD_DRV, megaco_ber_bin_drv_media_gateway_control_prev3c). - --define(V1_TRANS_MOD, megaco_binary_transformer_v1). --define(V2_TRANS_MOD, megaco_binary_transformer_v2). --define(V3_TRANS_MOD, megaco_binary_transformer_v3). --define(PREV3A_TRANS_MOD, megaco_binary_transformer_prev3a). --define(PREV3B_TRANS_MOD, megaco_binary_transformer_prev3b). --define(PREV3C_TRANS_MOD, megaco_binary_transformer_prev3c). - --define(BIN_LIB, megaco_binary_encoder_lib). - - -%%---------------------------------------------------------------------- -%% Detect (check/get) message version -%% Return {ok, Version} | {error, Reason} -%%---------------------------------------------------------------------- - -version_of([{version3,v3},driver|EC], Binary) -> - Decoders = [?V1_ASN1_MOD_DRV, ?V2_ASN1_MOD_DRV, ?V3_ASN1_MOD_DRV], - ?BIN_LIB:version_of(EC, Binary, dynamic, Decoders); -version_of([{version3,prev3c},driver|EC], Binary) -> - Decoders = [?V1_ASN1_MOD_DRV, ?V2_ASN1_MOD_DRV, ?PREV3C_ASN1_MOD_DRV], - ?BIN_LIB:version_of(EC, Binary, dynamic, Decoders); -version_of([{version3,prev3b},driver|EC], Binary) -> - Decoders = [?V1_ASN1_MOD_DRV, ?V2_ASN1_MOD_DRV, ?PREV3B_ASN1_MOD_DRV], - ?BIN_LIB:version_of(EC, Binary, dynamic, Decoders); -version_of([{version3,prev3a},driver|EC], Binary) -> - Decoders = [?V1_ASN1_MOD_DRV, ?V2_ASN1_MOD_DRV, ?PREV3A_ASN1_MOD_DRV], - ?BIN_LIB:version_of(EC, Binary, dynamic, Decoders); -version_of([{version3,v3}|EC], Binary) -> - Decoders = [?V1_ASN1_MOD, ?V2_ASN1_MOD, ?V3_ASN1_MOD], - ?BIN_LIB:version_of(EC, Binary, dynamic, Decoders); -version_of([{version3,prev3c}|EC], Binary) -> - Decoders = [?V1_ASN1_MOD, ?V2_ASN1_MOD, ?PREV3C_ASN1_MOD], - ?BIN_LIB:version_of(EC, Binary, dynamic, Decoders); -version_of([{version3,prev3b}|EC], Binary) -> - Decoders = [?V1_ASN1_MOD, ?V2_ASN1_MOD, ?PREV3B_ASN1_MOD], - ?BIN_LIB:version_of(EC, Binary, dynamic, Decoders); -version_of([{version3,prev3a}|EC], Binary) -> - Decoders = [?V1_ASN1_MOD, ?V2_ASN1_MOD, ?PREV3A_ASN1_MOD], - ?BIN_LIB:version_of(EC, Binary, dynamic, Decoders); -version_of([driver|EC], Binary) -> - Decoders = [?V1_ASN1_MOD_DRV, ?V2_ASN1_MOD_DRV, ?V3_ASN1_MOD_DRV], - ?BIN_LIB:version_of(EC, Binary, dynamic, Decoders); - -%% All values we need to take (special) care of has been delt with, -%% so just pass the rest on -version_of(EC, Binary) -> - Decoders = [?V1_ASN1_MOD, ?V2_ASN1_MOD, ?V3_ASN1_MOD], - ?BIN_LIB:version_of(EC, Binary, dynamic, Decoders). - - -%%---------------------------------------------------------------------- -%% Convert a 'MegacoMessage' record into a binary -%% Return {ok, Binary} | {error, Reason} -%%---------------------------------------------------------------------- - - -encode_message(EC, - #'MegacoMessage'{mess = #'Message'{version = V}} = MegaMsg) -> - encode_message(EC, V, MegaMsg). - - -%% -- Version 1 -- - -encode_message([{version3, _},driver|EC], 1, MegaMsg) -> - AsnMod = ?V1_ASN1_MOD_DRV, - TransMod = ?V1_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); -encode_message([driver|EC], 1, MegaMsg) -> - AsnMod = ?V1_ASN1_MOD_DRV, - TransMod = ?V1_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); -encode_message([{version3,_}|EC], 1, MegaMsg) -> - AsnMod = ?V1_ASN1_MOD, - TransMod = ?V1_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); - -%% All values we need to take (special) care of has been delt with, -%% so just pass the rest on -encode_message(EC, 1, MegaMsg) -> - AsnMod = ?V1_ASN1_MOD, - TransMod = ?V1_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); - - -%% -- Version 2 -- - -encode_message([{version3,_},driver|EC], 2, MegaMsg) -> - AsnMod = ?V2_ASN1_MOD_DRV, - TransMod = ?V2_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); -encode_message([driver|EC], 2, MegaMsg) -> - AsnMod = ?V2_ASN1_MOD_DRV, - TransMod = ?V2_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); -encode_message([{version3,_}|EC], 2, MegaMsg) -> - AsnMod = ?V2_ASN1_MOD, - TransMod = ?V2_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); - -%% All values we need to take (special) care of has been delt with, -%% so just pass the rest on -encode_message(EC, 2, MegaMsg) -> - AsnMod = ?V2_ASN1_MOD, - TransMod = ?V2_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); - - -%% -- Version 3 -- - -encode_message([{version3,v3},driver|EC], 3, MegaMsg) -> - AsnMod = ?V3_ASN1_MOD_DRV, - TransMod = ?V3_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); -encode_message([{version3,prev3c},driver|EC], 3, MegaMsg) -> - AsnMod = ?PREV3C_ASN1_MOD_DRV, - TransMod = ?PREV3C_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); -encode_message([{version3,prev3b},driver|EC], 3, MegaMsg) -> - AsnMod = ?PREV3B_ASN1_MOD_DRV, - TransMod = ?PREV3B_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); -encode_message([{version3,prev3a},driver|EC], 3, MegaMsg) -> - AsnMod = ?PREV3A_ASN1_MOD_DRV, - TransMod = ?PREV3A_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); -encode_message([{version3,v3}|EC], 3, MegaMsg) -> - AsnMod = ?V3_ASN1_MOD, - TransMod = ?V3_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); -encode_message([{version3,prev3c}|EC], 3, MegaMsg) -> - AsnMod = ?PREV3C_ASN1_MOD, - TransMod = ?PREV3C_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); -encode_message([{version3,prev3b}|EC], 3, MegaMsg) -> - AsnMod = ?PREV3B_ASN1_MOD, - TransMod = ?PREV3B_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); -encode_message([{version3,prev3a}|EC], 3, MegaMsg) -> - AsnMod = ?PREV3A_ASN1_MOD, - TransMod = ?PREV3A_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); -encode_message([driver|EC], 3, MegaMsg) -> - AsnMod = ?V3_ASN1_MOD_DRV, - TransMod = ?V3_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); - -%% All values we need to take (special) care of has been delt with, -%% so just pass the rest on -encode_message(EC, 3, MegaMsg) -> - AsnMod = ?V3_ASN1_MOD, - TransMod = ?V3_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list). - - -%%---------------------------------------------------------------------- -%% Convert a transaction (or transactions in the case of ack) record(s) -%% into a binary -%% Return {ok, Binary} | {error, Reason} -%%---------------------------------------------------------------------- - -%% encode_transaction([] = EC, 1, Trans) -> -%% AsnMod = ?V1_ASN1_MOD, -%% TransMod = ?V1_TRANS_MOD, -%% ?BIN_LIB:encode_transaction(EC, Trans, AsnMod, TransMod, -%% io_list); -%% encode_transaction([native] = EC, 1, Trans) -> -%% AsnMod = ?V1_ASN1_MOD, -%% TransMod = ?V1_TRANS_MOD, -%% ?BIN_LIB:encode_transaction(EC, Trans, AsnMod, TransMod, -%% io_list); -%% encode_transaction([driver|EC], 1, Trans) -> -%% AsnMod = ?V1_ASN1_MOD_DRV, -%% TransMod = ?V1_TRANS_MOD, -%% ?BIN_LIB:encode_transaction(EC, Trans, AsnMod, TransMod, -%% io_list); -%% encode_transaction(_EC, 1, _Trans) -> -%% AsnMod = ?V1_ASN1_MOD, -%% TransMod = ?V1_TRANS_MOD, -%% ?BIN_LIB:encode_transaction(EC, Trans, AsnMod, TransMod, -%% io_list); -%% encode_transaction([] = EC, 2, Trans) -> -%% AsnMod = ?V2_ASN1_MOD, -%% TransMod = ?V2_TRANS_MOD, -%% ?BIN_LIB:encode_transaction(EC, Trans, AsnMod, TransMod, -%% io_list); -%% encode_transaction([native] = EC, 2, Trans) -> -%% AsnMod = ?V2_ASN1_MOD, -%% TransMod = ?V2_TRANS_MOD, -%% ?BIN_LIB:encode_transaction(EC, Trans, AsnMod, TransMod, -%% io_list); -%% encode_transaction([driver|EC], 2, Trans) -> -%% AsnMod = ?V2_ASN1_MOD_DRV, -%% TransMod = ?V2_TRANS_MOD, -%% ?BIN_LIB:encode_transaction(EC, Trans, AsnMod, TransMod, -%% io_list); -%%encode_transaction(_EC, 2, _Trans) -> -%% AsnMod = ?V2_ASN1_MOD, -%% TransMod = ?V2_TRANS_MOD, -%% ?BIN_LIB:encode_transaction(EC, Trans, AsnMod, TransMod, -%% io_list). -%% encode_transaction([] = EC, 3, Trans) -> -%% AsnMod = ?V3_ASN1_MOD, -%% TransMod = ?V3_TRANS_MOD, -%% ?BIN_LIB:encode_transaction(EC, Trans, AsnMod, TransMod, -%% io_list); -%% encode_transaction([native] = EC, 3, Trans) -> -%% AsnMod = ?V3_ASN1_MOD, -%% TransMod = ?V3_TRANS_MOD, -%% ?BIN_LIB:encode_transaction(EC, Trans, AsnMod, TransMod, -%% io_list); -%% encode_transaction([driver|EC], 3, Trans) -> -%% AsnMod = ?V3_ASN1_MOD_DRV, -%% TransMod = ?V3_TRANS_MOD, -%% ?BIN_LIB:encode_transaction(EC, Trans, AsnMod, TransMod, -%% io_list); -%%encode_transaction(_EC, 3, _Trans) -> -%% AsnMod = ?V3_ASN1_MOD, -%% TransMod = ?V3_TRANS_MOD, -%% ?BIN_LIB:encode_transaction(EC, Trans, AsnMod, TransMod, -%% io_list). -encode_transaction(_EC, _V, _Trans) -> - {error, not_implemented}. - - -%%---------------------------------------------------------------------- -%% Convert a list of ActionRequest record's into a binary -%% Return {ok, DeepIoList} | {error, Reason} -%%---------------------------------------------------------------------- -%% encode_action_requests([] = EC, 1, ActReqs) when is_list(ActReqs) -> -%% AsnMod = ?V1_ASN1_MOD, -%% TransMod = ?V1_TRANS_MOD, -%% ?BIN_LIB:encode_action_requests(EC, ActReqs, -%% AsnMod, TransMod, -%% io_list); -%% encode_action_requests([native] = EC, 1, ActReqs) when is_list(ActReqs) -> -%% AsnMod = ?V1_ASN1_MOD, -%% TransMod = ?V1_TRANS_MOD, -%% ?BIN_LIB:encode_action_requests(EC, ActReqs, -%% AsnMod, TransMod, -%% io_list); -%% encode_action_requests([driver|EC], 1, ActReqs) when is_list(ActReqs) -> -%% AsnMod = ?V1_ASN1_MOD_DRV, -%% TransMod = ?V1_TRANS_MOD, -%% ?BIN_LIB:encode_action_requests(EC, ActReqs, -%% AsnMod, TransMod, -%% io_list); -%% encode_action_requests(_EC, 1, ActReqs) when is_list(ActReqs) -> -%% AsnMod = ?V1_ASN1_MOD, -%% TransMod = ?V1_TRANS_MOD, -%% ?BIN_LIB:encode_action_requests(EC, ActReqs, -%% AsnMod, TransMod, -%% io_list); -%% encode_action_requests([] = EC, 2, ActReqs) when is_list(ActReqs) -> -%% AsnMod = ?V2_ASN1_MOD, -%% TransMod = ?V2_TRANS_MOD, -%% ?BIN_LIB:encode_action_requests(EC, ActReqs, -%% AsnMod, TransMod, -%% io_list); -%% encode_action_requests([native] = EC, 2, ActReqs) when is_list(ActReqs) -> -%% AsnMod = ?V2_ASN1_MOD, -%% TransMod = ?V2_TRANS_MOD, -%% ?BIN_LIB:encode_action_requests(EC, ActReqs, -%% AsnMod, TransMod, -%% io_list); -%% encode_action_requests([driver|EC], 2, ActReqs) when is_list(ActReqs) -> -%% AsnMod = ?V2_ASN1_MOD_DRV, -%% TransMod = ?V2_TRANS_MOD, -%% ?BIN_LIB:encode_action_requests(EC, ActReqs, -%% AsnMod, TransMod, -%% io_list); -%% encode_action_requests(_EC, 2, ActReqs) when is_list(ActReqs) -> -%% AsnMod = ?V2_ASN1_MOD, -%% TransMod = ?V2_TRANS_MOD, -%% ?BIN_LIB:encode_action_requests(EC, ActReqs, -%% AsnMod, TransMod, -%% io_list); -%% encode_action_requests([] = EC, 3, ActReqs) when is_list(ActReqs) -> -%% AsnMod = ?V3_ASN1_MOD, -%% TransMod = ?V3_TRANS_MOD, -%% ?BIN_LIB:encode_action_requests(EC, ActReqs, -%% AsnMod, TransMod, -%% io_list); -%% encode_action_requests([native] = EC, 3, ActReqs) when is_list(ActReqs) -> -%% AsnMod = ?V3_ASN1_MOD, -%% TransMod = ?V3_TRANS_MOD, -%% ?BIN_LIB:encode_action_requests(EC, ActReqs, -%% AsnMod, TransMod, -%% io_list); -%% encode_action_requests([driver|EC], 3, ActReqs) when is_list(ActReqs) -> -%% AsnMod = ?V3_ASN1_MOD_DRV, -%% TransMod = ?V3_TRANS_MOD, -%% ?BIN_LIB:encode_action_requests(EC, ActReqs, -%% AsnMod, TransMod, -%% io_list); -%%encode_action_requests(_EC, 3, ActReqs) when is_list(ActReqs) -> -%% AsnMod = ?V3_ASN1_MOD, -%% TransMod = ?V3_TRANS_MOD, -%% ?BIN_LIB:encode_action_requests(EC, ActReqs, -%% AsnMod, TransMod, -%% io_list); -%% encode_action_requests(_EC, V, _ActReqs) -> -%% {error, {bad_version, V}}. -encode_action_requests(_EC, _V, _ActReqs) -> - {error, not_implemented}. - - -%%---------------------------------------------------------------------- -%% Convert a ActionRequest record into a binary -%% Return {ok, DeepIoList} | {error, Reason} -%%---------------------------------------------------------------------- -%% encode_action_request([] = EC, 1, ActReq) -> -%% AsnMod = ?V1_ASN1_MOD, -%% TransMod = ?V1_TRANS_MOD, -%% ?BIN_LIB:encode_action_request(EC, ActReq, -%% AsnMod, TransMod, -%% io_list); -%% encode_action_request([native] = EC, 1, ActReq) -> -%% AsnMod = ?V1_ASN1_MOD, -%% TransMod = ?V1_TRANS_MOD, -%% ?BIN_LIB:encode_action_request(EC, ActReq, -%% AsnMod, TransMod, -%% io_list); -%% encode_action_request([driver|EC], 1, ActReq) -> -%% AsnMod = ?V1_ASN1_MOD_DRV, -%% TransMod = ?V1_TRANS_MOD, -%% ?BIN_LIB:encode_action_request(EC, ActReq, -%% AsnMod, TransMod, -%% io_list); -%% encode_action_request(_EC, 1, ActReq) -> -%% AsnMod = ?V1_ASN1_MOD, -%% TransMod = ?V1_TRANS_MOD, -%% ?BIN_LIB:encode_action_request(EC, ActReq, -%% AsnMod, TransMod, -%% io_list); -%% encode_action_request([] = EC, 2, ActReq) -> -%% AsnMod = ?V2_ASN1_MOD, -%% TransMod = ?V2_TRANS_MOD, -%% ?BIN_LIB:encode_action_request(EC, ActReq, -%% AsnMod, TransMod, -%% io_list); -%% encode_action_request([native] = EC, 2, ActReq) -> -%% AsnMod = ?V2_ASN1_MOD, -%% TransMod = ?V2_TRANS_MOD, -%% ?BIN_LIB:encode_action_request(EC, ActReq, -%% AsnMod, TransMod, -%% io_list); -%% encode_action_request([driver|EC], 2, ActReq) -> -%% AsnMod = ?V2_ASN1_MOD_DRV, -%% TransMod = ?V2_TRANS_MOD, -%% ?BIN_LIB:encode_action_request(EC, ActReq, -%% AsnMod, TransMod, -%% io_list); -%% encode_action_request(_EC, 2, ActReq) -> -%% AsnMod = ?V2_ASN1_MOD, -%% TransMod = ?V2_TRANS_MOD, -%% ?BIN_LIB:encode_action_request(EC, ActReq, -%% AsnMod, TransMod, -%% io_list); -%% encode_action_request([] = EC, 3, ActReq) -> -%% AsnMod = ?V3_ASN1_MOD, -%% TransMod = ?V3_TRANS_MOD, -%% ?BIN_LIB:encode_action_request(EC, ActReq, -%% AsnMod, TransMod, -%% io_list); -%% encode_action_request([native] = EC, 3, ActReq) -> -%% AsnMod = ?V3_ASN1_MOD, -%% TransMod = ?V3_TRANS_MOD, -%% ?BIN_LIB:encode_action_request(EC, ActReq, -%% AsnMod, TransMod, -%% io_list); -%% encode_action_request([driver|EC], 3, ActReq) -> -%% AsnMod = ?V3_ASN1_MOD_DRV, -%% TransMod = ?V3_TRANS_MOD, -%% ?BIN_LIB:encode_action_request(EC, ActReq, -%% AsnMod, TransMod, -%% io_list); -%% encode_action_request(_EC, 3, ActReq) -> -%% AsnMod = ?V3_ASN1_MOD, -%% TransMod = ?V3_TRANS_MOD, -%% ?BIN_LIB:encode_action_request(EC, ActReq, -%% AsnMod, TransMod, -%% io_list); -encode_action_request(_EC, _V, _ActReq) -> - {error, not_implemented}. - - -%%---------------------------------------------------------------------- -%% Convert a action reply into a deep io list -%% Not yest supported by this binary codec! -%% Return {ok, DeepIoList} | {error, Reason} -%%---------------------------------------------------------------------- - -encode_action_reply(_EC, _V, _AcionReply) -> - {error, not_implemented}. - - -%%---------------------------------------------------------------------- -%% Convert a binary into a 'MegacoMessage' record -%% Return {ok, MegacoMessageRecord} | {error, Reason} -%%---------------------------------------------------------------------- - -%% Old decode function -decode_message(EC, Binary) -> - decode_message(EC, 1, Binary). - -%% -- Dynamic version detection -- - -%% Select from message -decode_message([{version3,v3},driver|EC], dynamic, Binary) -> - Mods = [{?V1_ASN1_MOD_DRV, ?V1_TRANS_MOD}, - {?V2_ASN1_MOD_DRV, ?V2_TRANS_MOD}, - {?V3_ASN1_MOD_DRV, ?V3_TRANS_MOD}], - ?BIN_LIB:decode_message_dynamic(EC, Binary, Mods, binary); -decode_message([{version3,prev3c},driver|EC], dynamic, Binary) -> - Mods = [{?V1_ASN1_MOD_DRV, ?V1_TRANS_MOD}, - {?V2_ASN1_MOD_DRV, ?V2_TRANS_MOD}, - {?PREV3C_ASN1_MOD_DRV, ?PREV3C_TRANS_MOD}], - ?BIN_LIB:decode_message_dynamic(EC, Binary, Mods, binary); -decode_message([{version3,prev3b},driver|EC], dynamic, Binary) -> - Mods = [{?V1_ASN1_MOD_DRV, ?V1_TRANS_MOD}, - {?V2_ASN1_MOD_DRV, ?V2_TRANS_MOD}, - {?PREV3B_ASN1_MOD_DRV, ?PREV3B_TRANS_MOD}], - ?BIN_LIB:decode_message_dynamic(EC, Binary, Mods, binary); -decode_message([{version3,prev3a},driver|EC], dynamic, Binary) -> - Mods = [{?V1_ASN1_MOD_DRV, ?V1_TRANS_MOD}, - {?V2_ASN1_MOD_DRV, ?V2_TRANS_MOD}, - {?PREV3A_ASN1_MOD_DRV, ?PREV3A_TRANS_MOD}], - ?BIN_LIB:decode_message_dynamic(EC, Binary, Mods, binary); -decode_message([{version3,v3}|EC], dynamic, Binary) -> - Mods = [{?V1_ASN1_MOD, ?V1_TRANS_MOD}, - {?V2_ASN1_MOD, ?V2_TRANS_MOD}, - {?V3_ASN1_MOD, ?V3_TRANS_MOD}], - ?BIN_LIB:decode_message_dynamic(EC, Binary, Mods, binary); -decode_message([{version3,prev3c}|EC], dynamic, Binary) -> - Mods = [{?V1_ASN1_MOD, ?V1_TRANS_MOD}, - {?V2_ASN1_MOD, ?V2_TRANS_MOD}, - {?PREV3C_ASN1_MOD, ?PREV3C_TRANS_MOD}], - ?BIN_LIB:decode_message_dynamic(EC, Binary, Mods, binary); -decode_message([{version3,prev3b}|EC], dynamic, Binary) -> - Mods = [{?V1_ASN1_MOD, ?V1_TRANS_MOD}, - {?V2_ASN1_MOD, ?V2_TRANS_MOD}, - {?PREV3B_ASN1_MOD, ?PREV3B_TRANS_MOD}], - ?BIN_LIB:decode_message_dynamic(EC, Binary, Mods, binary); -decode_message([{version3,prev3a}|EC], dynamic, Binary) -> - Mods = [{?V1_ASN1_MOD, ?V1_TRANS_MOD}, - {?V2_ASN1_MOD, ?V2_TRANS_MOD}, - {?PREV3A_ASN1_MOD, ?PREV3A_TRANS_MOD}], - ?BIN_LIB:decode_message_dynamic(EC, Binary, Mods, binary); -decode_message([driver|EC], dynamic, Binary) -> - Mods = [{?V1_ASN1_MOD_DRV, ?V1_TRANS_MOD}, - {?V2_ASN1_MOD_DRV, ?V2_TRANS_MOD}, - {?V3_ASN1_MOD_DRV, ?V3_TRANS_MOD}], - ?BIN_LIB:decode_message_dynamic(EC, Binary, Mods, binary); - -%% All values we need to take (special) care of has been delt with, -%% so just pass the rest on -decode_message(EC, dynamic, Binary) -> - Mods = [{?V1_ASN1_MOD, ?V1_TRANS_MOD}, - {?V2_ASN1_MOD, ?V2_TRANS_MOD}, - {?V3_ASN1_MOD, ?V3_TRANS_MOD}], - ?BIN_LIB:decode_message_dynamic(EC, Binary, Mods, binary); - - -%% -- Version 1 -- - -decode_message([{version3,_},driver|EC], 1, Binary) -> - AsnMod = ?V1_ASN1_MOD_DRV, - TransMod = ?V1_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); -decode_message([driver|EC], 1, Binary) -> - AsnMod = ?V1_ASN1_MOD_DRV, - TransMod = ?V1_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); -decode_message([{version3,_}|EC], 1, Binary) -> - AsnMod = ?V1_ASN1_MOD, - TransMod = ?V1_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); - -%% All values we need to take (special) care of has been delt with, -%% so just pass the rest on -decode_message(EC, 1, Binary) -> - AsnMod = ?V1_ASN1_MOD, - TransMod = ?V1_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); - - -%% -- Version 2 -- - -decode_message([{version3,_},driver|EC], 2, Binary) -> - AsnMod = ?V2_ASN1_MOD_DRV, - TransMod = ?V2_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); -decode_message([driver|EC], 2, Binary) -> - AsnMod = ?V2_ASN1_MOD_DRV, - TransMod = ?V2_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); -decode_message([{version3,_}|EC], 2, Binary) -> - AsnMod = ?V2_ASN1_MOD, - TransMod = ?V2_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); - -%% All values we need to take (special) care of has been delt with, -%% so just pass the rest on -decode_message(EC, 2, Binary) -> - AsnMod = ?V2_ASN1_MOD, - TransMod = ?V2_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); - - -%% -- Version 3 -- - -decode_message([{version3,v3},driver|EC], 3, Binary) -> - AsnMod = ?V3_ASN1_MOD_DRV, - TransMod = ?V3_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); -decode_message([{version3,prev3c},driver|EC], 3, Binary) -> - AsnMod = ?PREV3C_ASN1_MOD_DRV, - TransMod = ?PREV3C_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); -decode_message([{version3,prev3b},driver|EC], 3, Binary) -> - AsnMod = ?PREV3B_ASN1_MOD_DRV, - TransMod = ?PREV3B_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); -decode_message([{version3,prev3a},driver|EC], 3, Binary) -> - AsnMod = ?PREV3A_ASN1_MOD_DRV, - TransMod = ?PREV3A_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); -decode_message([{version3,v3}|EC], 3, Binary) -> - AsnMod = ?V3_ASN1_MOD, - TransMod = ?V3_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); -decode_message([{version3,prev3c}|EC], 3, Binary) -> - AsnMod = ?PREV3C_ASN1_MOD, - TransMod = ?PREV3C_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); -decode_message([{version3,prev3b}|EC], 3, Binary) -> - AsnMod = ?PREV3B_ASN1_MOD, - TransMod = ?PREV3B_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); -decode_message([{version3,prev3a}|EC], 3, Binary) -> - AsnMod = ?PREV3A_ASN1_MOD, - TransMod = ?PREV3A_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); -decode_message([driver|EC], 3, Binary) -> - AsnMod = ?V3_ASN1_MOD_DRV, - TransMod = ?V3_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); - -%% All values we need to take (special) care of has been delt with, -%% so just pass the rest on -decode_message(EC, 3, Binary) -> - AsnMod = ?V3_ASN1_MOD, - TransMod = ?V3_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary). - - -decode_mini_message([{version3,v3},driver|EC], dynamic, Bin) -> - Mods = [?V1_ASN1_MOD_DRV, - ?V2_ASN1_MOD_DRV, - ?V3_ASN1_MOD_DRV], - ?BIN_LIB:decode_mini_message_dynamic(EC, Bin, Mods, binary); -decode_mini_message([{version3,prev3c},driver|EC], dynamic, Bin) -> - Mods = [?V1_ASN1_MOD_DRV, - ?V2_ASN1_MOD_DRV, - ?PREV3C_ASN1_MOD_DRV], - ?BIN_LIB:decode_mini_message_dynamic(EC, Bin, Mods, binary); -decode_mini_message([{version3,prev3b},driver|EC], dynamic, Bin) -> - Mods = [?V1_ASN1_MOD_DRV, - ?V2_ASN1_MOD_DRV, - ?PREV3B_ASN1_MOD_DRV], - ?BIN_LIB:decode_mini_message_dynamic(EC, Bin, Mods, binary); -decode_mini_message([{version3,prev3a},driver|EC], dynamic, Bin) -> - Mods = [?V1_ASN1_MOD_DRV, - ?V2_ASN1_MOD_DRV, - ?PREV3A_ASN1_MOD_DRV], - ?BIN_LIB:decode_mini_message_dynamic(EC, Bin, Mods, binary); -decode_mini_message([{version3,v3}|EC], dynamic, Bin) -> - Mods = [?V1_ASN1_MOD, - ?V2_ASN1_MOD, - ?V3_ASN1_MOD], - ?BIN_LIB:decode_mini_message_dynamic(EC, Bin, Mods, binary); -decode_mini_message([{version3,prev3c}|EC], dynamic, Bin) -> - Mods = [?V1_ASN1_MOD, - ?V2_ASN1_MOD, - ?PREV3C_ASN1_MOD], - ?BIN_LIB:decode_mini_message_dynamic(EC, Bin, Mods, binary); -decode_mini_message([{version3,prev3b}|EC], dynamic, Bin) -> - Mods = [?V1_ASN1_MOD, - ?V2_ASN1_MOD, - ?PREV3B_ASN1_MOD], - ?BIN_LIB:decode_mini_message_dynamic(EC, Bin, Mods, binary); -decode_mini_message([{version3,prev3a}|EC], dynamic, Bin) -> - Mods = [?V1_ASN1_MOD, - ?V2_ASN1_MOD, - ?PREV3A_ASN1_MOD], - ?BIN_LIB:decode_mini_message_dynamic(EC, Bin, Mods, binary); -decode_mini_message([driver|EC], dynamic, Bin) -> - Mods = [?V1_ASN1_MOD_DRV, - ?V2_ASN1_MOD_DRV, - ?V3_ASN1_MOD_DRV], - ?BIN_LIB:decode_mini_message_dynamic(EC, Bin, Mods, binary); -decode_mini_message(EC, dynamic, Bin) -> - Mods = [?V1_ASN1_MOD, - ?V2_ASN1_MOD, - ?V3_ASN1_MOD], - ?BIN_LIB:decode_mini_message_dynamic(EC, Bin, Mods, binary); -decode_mini_message([{version3,_},driver|EC], 1, Bin) -> - AsnMod = ?V1_ASN1_MOD_DRV, - ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); -decode_mini_message([{version3,_}|EC], 1, Bin) -> - AsnMod = ?V1_ASN1_MOD, - ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); -decode_mini_message([driver|EC], 1, Bin) -> - AsnMod = ?V1_ASN1_MOD_DRV, - ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); -decode_mini_message(EC, 1, Bin) -> - AsnMod = ?V1_ASN1_MOD, - ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); -decode_mini_message([{version3,_},driver|EC], 2, Bin) -> - AsnMod = ?V2_ASN1_MOD_DRV, - ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); -decode_mini_message([{version3,_}|EC], 2, Bin) -> - AsnMod = ?V2_ASN1_MOD, - ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); -decode_mini_message([driver|EC], 2, Bin) -> - AsnMod = ?V2_ASN1_MOD_DRV, - ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); -decode_mini_message(EC, 2, Bin) -> - AsnMod = ?V2_ASN1_MOD, - ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); -decode_mini_message([{version3,v3},driver|EC], 3, Bin) -> - AsnMod = ?V3_ASN1_MOD_DRV, - ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); -decode_mini_message([{version3,prev3c},driver|EC], 3, Bin) -> - AsnMod = ?PREV3C_ASN1_MOD_DRV, - ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); -decode_mini_message([{version3,prev3b},driver|EC], 3, Bin) -> - AsnMod = ?PREV3B_ASN1_MOD_DRV, - ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); -decode_mini_message([{version3,prev3a},driver|EC], 3, Bin) -> - AsnMod = ?PREV3A_ASN1_MOD_DRV, - ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); -decode_mini_message([{version3,v3}|EC], 3, Bin) -> - AsnMod = ?V3_ASN1_MOD, - ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); -decode_mini_message([{version3,prev3c}|EC], 3, Bin) -> - AsnMod = ?PREV3C_ASN1_MOD, - ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); -decode_mini_message([{version3,prev3b}|EC], 3, Bin) -> - AsnMod = ?PREV3B_ASN1_MOD, - ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); -decode_mini_message([{version3,prev3a}|EC], 3, Bin) -> - AsnMod = ?PREV3A_ASN1_MOD, - ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); -decode_mini_message([driver|EC], 3, Bin) -> - AsnMod = ?V3_ASN1_MOD_DRV, - ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); -decode_mini_message(EC, 3, Bin) -> - AsnMod = ?V3_ASN1_MOD, - ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary). diff --git a/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_prev3a.set.asn b/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_prev3a.set.asn deleted file mode 100644 index b9ba7ffdb4..0000000000 --- a/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_prev3a.set.asn +++ /dev/null @@ -1 +0,0 @@ -MEDIA-GATEWAY-CONTROL-prev3a.asn diff --git a/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_prev3b.set.asn b/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_prev3b.set.asn deleted file mode 100644 index 0437bde310..0000000000 --- a/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_prev3b.set.asn +++ /dev/null @@ -1 +0,0 @@ -MEDIA-GATEWAY-CONTROL-prev3b.asn diff --git a/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_prev3c.asn1config b/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_prev3c.asn1config deleted file mode 100644 index c74422b9a2..0000000000 --- a/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_prev3c.asn1config +++ /dev/null @@ -1,43 +0,0 @@ -{exclusive_decode, - {'megaco_ber_bin_media_gateway_control_prev3c', - [ - {decode_message_trans_partial, - [ - 'MegacoMessage',[{mess,[{messageBody,[{transactions,parts}]}]}] - ] - }, - {decode_message_acts_partial, - ['Transaction', - [ - {transactionRequest, - [ - {actions,parts} - ] - }, - {transactionReply, - [ - {transactionResult, [{actionReplies,parts}]} - ] - } - ] - ] - }, - {decode_message_version, - ['MegacoMessage', - [ - {authHeader,undecoded}, - {mess,[{mId,undecoded},{messageBody,undecoded}]} - ] - ] - }, - {decode_message_mId, - ['MegacoMessage', - [ - {authHeader,undecoded}, - {mess,[{messageBody,undecoded}]} - ] - ] - } - ] - } -}. diff --git a/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_prev3c.set.asn b/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_prev3c.set.asn deleted file mode 100644 index e78055fbad..0000000000 --- a/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_prev3c.set.asn +++ /dev/null @@ -1 +0,0 @@ -MEDIA-GATEWAY-CONTROL-prev3c.asn diff --git a/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_v1.asn1config b/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_v1.asn1config deleted file mode 100644 index e815e90948..0000000000 --- a/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_v1.asn1config +++ /dev/null @@ -1,44 +0,0 @@ -{exclusive_decode, - {'megaco_ber_bin_media_gateway_control_v1', - [ - {decode_message_trans_partial, - [ - 'MegacoMessage',[{mess,[{messageBody,[{transactions,parts}]}]}] - ] - }, - {decode_message_acts_partial, - ['Transaction', - [ - {transactionRequest, - [ - {actions,parts} - ] - }, - {transactionReply, - [ - {transactionResult, [{actionReplies,parts}]} - ] - } - ] - ] - }, - {decode_message_version, - ['MegacoMessage', - [ - {authHeader,undecoded}, - {mess,[{mId,undecoded},{messageBody,undecoded}]} - ] - ] - }, - {decode_message_mId, - ['MegacoMessage', - [ - {authHeader,undecoded}, - {mess,[{messageBody,undecoded}]} - ] - ] - } - - ] - } -}. diff --git a/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_v1.set.asn b/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_v1.set.asn deleted file mode 100644 index 0f5a92dba1..0000000000 --- a/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_v1.set.asn +++ /dev/null @@ -1 +0,0 @@ -MEDIA-GATEWAY-CONTROL-v1.asn diff --git a/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_v2.set.asn b/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_v2.set.asn deleted file mode 100644 index 7fc82b127f..0000000000 --- a/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_v2.set.asn +++ /dev/null @@ -1 +0,0 @@ -MEDIA-GATEWAY-CONTROL-v2.asn diff --git a/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_v3.set.asn b/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_v3.set.asn deleted file mode 100644 index 1d7950a283..0000000000 --- a/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_v3.set.asn +++ /dev/null @@ -1 +0,0 @@ -MEDIA-GATEWAY-CONTROL-v3.asn diff --git a/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_v2.asn1config b/lib/megaco/src/binary/megaco_ber_media_gateway_control_prev3a.asn1config index cc072b30ee..da67561f1b 100644 --- a/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_v2.asn1config +++ b/lib/megaco/src/binary/megaco_ber_media_gateway_control_prev3a.asn1config @@ -1,5 +1,5 @@ {exclusive_decode, - {'megaco_ber_bin_media_gateway_control_v2', + {'megaco_ber_media_gateway_control_prev3a', [ {decode_message_trans_partial, [ @@ -14,7 +14,7 @@ {actions,parts} ] }, - {transactionReply, + {transactionReply, [ {transactionResult, [{actionReplies,parts}]} ] diff --git a/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_v3.asn1config b/lib/megaco/src/binary/megaco_ber_media_gateway_control_prev3b.asn1config index deeb2b2da9..2f25f03d97 100644 --- a/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_v3.asn1config +++ b/lib/megaco/src/binary/megaco_ber_media_gateway_control_prev3b.asn1config @@ -1,5 +1,5 @@ {exclusive_decode, - {'megaco_ber_bin_media_gateway_control_v3', + {'megaco_ber_media_gateway_control_prev3b', [ {decode_message_trans_partial, [ @@ -14,7 +14,7 @@ {actions,parts} ] }, - {transactionReply, + {transactionReply, [ {transactionResult, [{actionReplies,parts}]} ] diff --git a/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_prev3a.asn1config b/lib/megaco/src/binary/megaco_ber_media_gateway_control_prev3c.asn1config index 456ce750ad..23c343eed0 100644 --- a/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_prev3a.asn1config +++ b/lib/megaco/src/binary/megaco_ber_media_gateway_control_prev3c.asn1config @@ -1,5 +1,5 @@ {exclusive_decode, - {'megaco_ber_bin_media_gateway_control_prev3a', + {'megaco_ber_media_gateway_control_prev3c', [ {decode_message_trans_partial, [ @@ -14,7 +14,7 @@ {actions,parts} ] }, - {transactionReply, + {transactionReply, [ {transactionResult, [{actionReplies,parts}]} ] diff --git a/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_v1.asn1config b/lib/megaco/src/binary/megaco_ber_media_gateway_control_v1.asn1config index ea10a7d527..951825c0aa 100644 --- a/lib/megaco/src/binary/megaco_ber_bin_drv_media_gateway_control_v1.asn1config +++ b/lib/megaco/src/binary/megaco_ber_media_gateway_control_v1.asn1config @@ -1,5 +1,5 @@ {exclusive_decode, - {'megaco_ber_bin_drv_media_gateway_control_v1', + {'megaco_ber_media_gateway_control_v1', [ {decode_message_trans_partial, [ @@ -14,7 +14,7 @@ {actions,parts} ] }, - {transactionReply, + {transactionReply, [ {transactionResult, [{actionReplies,parts}]} ] @@ -38,7 +38,7 @@ ] ] } + ] } }. - diff --git a/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_prev3b.asn1config b/lib/megaco/src/binary/megaco_ber_media_gateway_control_v3.asn1config index fa5cd80baf..e4b1f9ece9 100644 --- a/lib/megaco/src/binary/megaco_ber_bin_media_gateway_control_prev3b.asn1config +++ b/lib/megaco/src/binary/megaco_ber_media_gateway_control_v3.asn1config @@ -1,5 +1,5 @@ {exclusive_decode, - {'megaco_ber_bin_media_gateway_control_prev3b', + {'megaco_ber_media_gateway_control_v3', [ {decode_message_trans_partial, [ @@ -14,7 +14,7 @@ {actions,parts} ] }, - {transactionReply, + {transactionReply, [ {transactionResult, [{actionReplies,parts}]} ] diff --git a/lib/megaco/src/binary/megaco_binary_encoder.erl b/lib/megaco/src/binary/megaco_binary_encoder.erl index f825f91a45..51e167590d 100644 --- a/lib/megaco/src/binary/megaco_binary_encoder.erl +++ b/lib/megaco/src/binary/megaco_binary_encoder.erl @@ -241,55 +241,30 @@ encode_action_reply(_EC, _V, _AcionReply) -> %% Return {ok, Version} | {error, Reason} %%---------------------------------------------------------------------- -version_of([{version3,v3},driver|EC], Binary) -> - Decoders = [megaco_ber_bin_drv_media_gateway_control_v1, - megaco_ber_bin_drv_media_gateway_control_v2, - megaco_ber_bin_drv_media_gateway_control_v3], - ?BIN_LIB:version_of(EC, Binary, dynamic, Decoders); -version_of([{version3,prev3c},driver|EC], Binary) -> - Decoders = [megaco_ber_bin_drv_media_gateway_control_v1, - megaco_ber_bin_drv_media_gateway_control_v2, - megaco_ber_bin_drv_media_gateway_control_prev3c], - ?BIN_LIB:version_of(EC, Binary, dynamic, Decoders); -version_of([{version3,prev3b},driver|EC], Binary) -> - Decoders = [megaco_ber_bin_drv_media_gateway_control_v1, - megaco_ber_bin_drv_media_gateway_control_v2, - megaco_ber_bin_drv_media_gateway_control_prev3b], - ?BIN_LIB:version_of(EC, Binary, dynamic, Decoders); -version_of([{version3,prev3a},driver|EC], Binary) -> - Decoders = [megaco_ber_bin_drv_media_gateway_control_v1, - megaco_ber_bin_drv_media_gateway_control_v2, - megaco_ber_bin_drv_media_gateway_control_prev3a], - ?BIN_LIB:version_of(EC, Binary, dynamic, Decoders); -version_of([driver|EC], Binary) -> - Decoders = [megaco_ber_bin_drv_media_gateway_control_v1, - megaco_ber_bin_drv_media_gateway_control_v2, - megaco_ber_bin_drv_media_gateway_control_v3], - ?BIN_LIB:version_of(EC, Binary, dynamic, Decoders); version_of([{version3,v3}|EC], Binary) -> - Decoders = [megaco_ber_bin_media_gateway_control_v1, - megaco_ber_bin_media_gateway_control_v2, - megaco_ber_bin_media_gateway_control_v3], + Decoders = [megaco_ber_media_gateway_control_v1, + megaco_ber_media_gateway_control_v2, + megaco_ber_media_gateway_control_v3], ?BIN_LIB:version_of(EC, Binary, dynamic, Decoders); version_of([{version3,prev3c}|EC], Binary) -> - Decoders = [megaco_ber_bin_media_gateway_control_v1, - megaco_ber_bin_media_gateway_control_v2, - megaco_ber_bin_media_gateway_control_prev3c], + Decoders = [megaco_ber_media_gateway_control_v1, + megaco_ber_media_gateway_control_v2, + megaco_ber_media_gateway_control_prev3c], ?BIN_LIB:version_of(EC, Binary, dynamic, Decoders); version_of([{version3,prev3b}|EC], Binary) -> - Decoders = [megaco_ber_bin_media_gateway_control_v1, - megaco_ber_bin_media_gateway_control_v2, - megaco_ber_bin_media_gateway_control_prev3b], + Decoders = [megaco_ber_media_gateway_control_v1, + megaco_ber_media_gateway_control_v2, + megaco_ber_media_gateway_control_prev3b], ?BIN_LIB:version_of(EC, Binary, dynamic, Decoders); version_of([{version3,prev3a}|EC], Binary) -> - Decoders = [megaco_ber_bin_media_gateway_control_v1, - megaco_ber_bin_media_gateway_control_v2, - megaco_ber_bin_media_gateway_control_prev3a], + Decoders = [megaco_ber_media_gateway_control_v1, + megaco_ber_media_gateway_control_v2, + megaco_ber_media_gateway_control_prev3a], ?BIN_LIB:version_of(EC, Binary, dynamic, Decoders); version_of(EC, Binary) -> - Decoders = [megaco_ber_bin_media_gateway_control_v1, - megaco_ber_bin_media_gateway_control_v2, - megaco_ber_bin_media_gateway_control_v3], + Decoders = [megaco_ber_media_gateway_control_v1, + megaco_ber_media_gateway_control_v2, + megaco_ber_media_gateway_control_v3], ?BIN_LIB:version_of(EC, Binary, dynamic, Decoders). @@ -301,287 +276,153 @@ version_of(EC, Binary) -> decode_message(EC, Binary) -> decode_message(EC, 1, Binary). -decode_message([{version3,v3},driver|EC], dynamic, Binary) -> - Decoders = [{megaco_ber_bin_drv_media_gateway_control_v1, - megaco_binary_transformer_v1}, - {megaco_ber_bin_drv_media_gateway_control_v2, - megaco_binary_transformer_v2}, - {megaco_ber_bin_drv_media_gateway_control_v3, - megaco_binary_transformer_v3}], - ?BIN_LIB:decode_message_dynamic(EC, Binary, Decoders, binary); -decode_message([{version3,prev3c},driver|EC], dynamic, Binary) -> - Decoders = [{megaco_ber_bin_drv_media_gateway_control_v1, - megaco_binary_transformer_v1}, - {megaco_ber_bin_drv_media_gateway_control_v2, - megaco_binary_transformer_v2}, - {megaco_ber_bin_drv_media_gateway_control_prev3c, - megaco_binary_transformer_prev3c}], - ?BIN_LIB:decode_message_dynamic(EC, Binary, Decoders, binary); -decode_message([{version3,prev3b},driver|EC], dynamic, Binary) -> - Decoders = [{megaco_ber_bin_drv_media_gateway_control_v1, - megaco_binary_transformer_v1}, - {megaco_ber_bin_drv_media_gateway_control_v2, - megaco_binary_transformer_v2}, - {megaco_ber_bin_drv_media_gateway_control_prev3b, - megaco_binary_transformer_prev3b}], - ?BIN_LIB:decode_message_dynamic(EC, Binary, Decoders, binary); -decode_message([{version3,prev3a},driver|EC], dynamic, Binary) -> - Decoders = [{megaco_ber_bin_drv_media_gateway_control_v1, - megaco_binary_transformer_v1}, - {megaco_ber_bin_drv_media_gateway_control_v2, - megaco_binary_transformer_v2}, - {megaco_ber_bin_drv_media_gateway_control_prev3a, - megaco_binary_transformer_prev3a}], - ?BIN_LIB:decode_message_dynamic(EC, Binary, Decoders, binary); -decode_message([driver|EC], dynamic, Binary) -> - Decoders = [{megaco_ber_bin_drv_media_gateway_control_v1, - megaco_binary_transformer_v1}, - {megaco_ber_bin_drv_media_gateway_control_v2, - megaco_binary_transformer_v2}, - {megaco_ber_bin_drv_media_gateway_control_v3, - megaco_binary_transformer_v3}], - ?BIN_LIB:decode_message_dynamic(EC, Binary, Decoders, binary); decode_message([{version3,v3}|EC], dynamic, Binary) -> - Decoders = [{megaco_ber_bin_media_gateway_control_v1, + Decoders = [{megaco_ber_media_gateway_control_v1, megaco_binary_transformer_v1}, - {megaco_ber_bin_media_gateway_control_v2, + {megaco_ber_media_gateway_control_v2, megaco_binary_transformer_v2}, - {megaco_ber_bin_media_gateway_control_v3, + {megaco_ber_media_gateway_control_v3, megaco_binary_transformer_v3}], ?BIN_LIB:decode_message_dynamic(EC, Binary, Decoders, binary); decode_message([{version3,prev3c}|EC], dynamic, Binary) -> - Decoders = [{megaco_ber_bin_media_gateway_control_v1, + Decoders = [{megaco_ber_media_gateway_control_v1, megaco_binary_transformer_v1}, - {megaco_ber_bin_media_gateway_control_v2, + {megaco_ber_media_gateway_control_v2, megaco_binary_transformer_v2}, - {megaco_ber_bin_media_gateway_control_prev3c, + {megaco_ber_media_gateway_control_prev3c, megaco_binary_transformer_prev3c}], ?BIN_LIB:decode_message_dynamic(EC, Binary, Decoders, binary); decode_message([{version3,prev3b}|EC], dynamic, Binary) -> - Decoders = [{megaco_ber_bin_media_gateway_control_v1, + Decoders = [{megaco_ber_media_gateway_control_v1, megaco_binary_transformer_v1}, - {megaco_ber_bin_media_gateway_control_v2, + {megaco_ber_media_gateway_control_v2, megaco_binary_transformer_v2}, - {megaco_ber_bin_media_gateway_control_prev3b, + {megaco_ber_media_gateway_control_prev3b, megaco_binary_transformer_prev3b}], ?BIN_LIB:decode_message_dynamic(EC, Binary, Decoders, binary); decode_message([{version3,prev3a}|EC], dynamic, Binary) -> - Decoders = [{megaco_ber_bin_media_gateway_control_v1, + Decoders = [{megaco_ber_media_gateway_control_v1, megaco_binary_transformer_v1}, - {megaco_ber_bin_media_gateway_control_v2, + {megaco_ber_media_gateway_control_v2, megaco_binary_transformer_v2}, - {megaco_ber_bin_media_gateway_control_prev3a, + {megaco_ber_media_gateway_control_prev3a, megaco_binary_transformer_prev3a}], ?BIN_LIB:decode_message_dynamic(EC, Binary, Decoders, binary); decode_message(EC, dynamic, Binary) -> - Decoders = [{megaco_ber_bin_media_gateway_control_v1, + Decoders = [{megaco_ber_media_gateway_control_v1, megaco_binary_transformer_v1}, - {megaco_ber_bin_media_gateway_control_v2, + {megaco_ber_media_gateway_control_v2, megaco_binary_transformer_v2}, - {megaco_ber_bin_media_gateway_control_v3, + {megaco_ber_media_gateway_control_v3, megaco_binary_transformer_v3}], ?BIN_LIB:decode_message_dynamic(EC, Binary, Decoders, binary); %% -- Version 1 -- -decode_message([{version3,_},driver|EC], 1, Binary) -> - AsnMod = megaco_ber_bin_drv_media_gateway_control_v1, - TransMod = megaco_binary_transformer_v1, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); - -decode_message([driver|EC], 1, Binary) -> - AsnMod = megaco_ber_bin_drv_media_gateway_control_v1, - TransMod = megaco_binary_transformer_v1, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); - decode_message([{version3,_}|EC], 1, Binary) -> - AsnMod = megaco_ber_bin_media_gateway_control_v1, + AsnMod = megaco_ber_media_gateway_control_v1, TransMod = megaco_binary_transformer_v1, ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); decode_message(EC, 1, Binary) -> - AsnMod = megaco_ber_bin_media_gateway_control_v1, + AsnMod = megaco_ber_media_gateway_control_v1, TransMod = megaco_binary_transformer_v1, ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); %% -- Version 2 -- -decode_message([{version3,_},driver|EC], 2, Binary) -> - AsnMod = megaco_ber_bin_drv_media_gateway_control_v2, - TransMod = megaco_binary_transformer_v2, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); - -decode_message([driver|EC], 2, Binary) -> - AsnMod = megaco_ber_bin_drv_media_gateway_control_v2, - TransMod = megaco_binary_transformer_v2, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); - decode_message([{version3,_}|EC], 2, Binary) -> - AsnMod = megaco_ber_bin_media_gateway_control_v2, + AsnMod = megaco_ber_media_gateway_control_v2, TransMod = megaco_binary_transformer_v2, ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); decode_message(EC, 2, Binary) -> - AsnMod = megaco_ber_bin_media_gateway_control_v2, + AsnMod = megaco_ber_media_gateway_control_v2, TransMod = megaco_binary_transformer_v2, ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); %% -- Version 3 -- -decode_message([{version3,v3},driver|EC], 3, Binary) -> - AsnMod = megaco_ber_bin_drv_media_gateway_control_v3, - TransMod = megaco_binary_transformer_v3, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); -decode_message([{version3,prev3c},driver|EC], 3, Binary) -> - AsnMod = megaco_ber_bin_drv_media_gateway_control_prev3c, - TransMod = megaco_binary_transformer_prev3c, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); -decode_message([{version3,prev3b},driver|EC], 3, Binary) -> - AsnMod = megaco_ber_bin_drv_media_gateway_control_prev3b, - TransMod = megaco_binary_transformer_prev3b, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); -decode_message([{version3,prev3a},driver|EC], 3, Binary) -> - AsnMod = megaco_ber_bin_drv_media_gateway_control_prev3a, - TransMod = megaco_binary_transformer_prev3a, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); - -decode_message([driver|EC], 3, Binary) -> - AsnMod = megaco_ber_bin_drv_media_gateway_control_v3, - TransMod = megaco_binary_transformer_v3, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); - decode_message([{version3,v3}|EC], 3, Binary) -> - AsnMod = megaco_ber_bin_media_gateway_control_v3, + AsnMod = megaco_ber_media_gateway_control_v3, TransMod = megaco_binary_transformer_v3, ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); decode_message([{version3,prev3c}|EC], 3, Binary) -> - AsnMod = megaco_ber_bin_media_gateway_control_prev3c, + AsnMod = megaco_ber_media_gateway_control_prev3c, TransMod = megaco_binary_transformer_prev3c, ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); decode_message([{version3,prev3b}|EC], 3, Binary) -> - AsnMod = megaco_ber_bin_media_gateway_control_prev3b, + AsnMod = megaco_ber_media_gateway_control_prev3b, TransMod = megaco_binary_transformer_prev3b, ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); decode_message([{version3,prev3a}|EC], 3, Binary) -> - AsnMod = megaco_ber_bin_media_gateway_control_prev3a, + AsnMod = megaco_ber_media_gateway_control_prev3a, TransMod = megaco_binary_transformer_prev3a, ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); decode_message(EC, 3, Binary) -> - AsnMod = megaco_ber_bin_media_gateway_control_v3, + AsnMod = megaco_ber_media_gateway_control_v3, TransMod = megaco_binary_transformer_v3, ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary). -decode_mini_message([{version3,v3},driver|EC], dynamic, Bin) -> - Mods = [megaco_ber_bin_drv_media_gateway_control_v1, - megaco_ber_bin_drv_media_gateway_control_v2, - megaco_ber_bin_drv_media_gateway_control_v3], - ?BIN_LIB:decode_mini_message_dynamic(EC, Bin, Mods, binary); -decode_mini_message([{version3,prev3c},driver|EC], dynamic, Bin) -> - Mods = [megaco_ber_bin_drv_media_gateway_control_v1, - megaco_ber_bin_drv_media_gateway_control_v2, - megaco_ber_bin_drv_media_gateway_control_prev3c], - ?BIN_LIB:decode_mini_message_dynamic(EC, Bin, Mods, binary); -decode_mini_message([{version3,prev3b},driver|EC], dynamic, Bin) -> - Mods = [megaco_ber_bin_drv_media_gateway_control_v1, - megaco_ber_bin_drv_media_gateway_control_v2, - megaco_ber_bin_drv_media_gateway_control_prev3b], - ?BIN_LIB:decode_mini_message_dynamic(EC, Bin, Mods, binary); -decode_mini_message([{version3,prev3a},driver|EC], dynamic, Bin) -> - Mods = [megaco_ber_bin_drv_media_gateway_control_v1, - megaco_ber_bin_drv_media_gateway_control_v2, - megaco_ber_bin_drv_media_gateway_control_prev3a], - ?BIN_LIB:decode_mini_message_dynamic(EC, Bin, Mods, binary); -decode_mini_message([driver|EC], dynamic, Bin) -> - Mods = [megaco_ber_bin_drv_media_gateway_control_v1, - megaco_ber_bin_drv_media_gateway_control_v2, - megaco_ber_bin_drv_media_gateway_control_v3], - ?BIN_LIB:decode_mini_message_dynamic(EC, Bin, Mods, binary); decode_mini_message([{version3,v3}|EC], dynamic, Bin) -> - Mods = [megaco_ber_bin_media_gateway_control_v1, - megaco_ber_bin_media_gateway_control_v2, - megaco_ber_bin_media_gateway_control_v3], + Mods = [megaco_ber_media_gateway_control_v1, + megaco_ber_media_gateway_control_v2, + megaco_ber_media_gateway_control_v3], ?BIN_LIB:decode_mini_message_dynamic(EC, Bin, Mods, binary); decode_mini_message([{version3,prev3c}|EC], dynamic, Bin) -> - Mods = [megaco_ber_bin_media_gateway_control_v1, - megaco_ber_bin_media_gateway_control_v2, - megaco_ber_bin_media_gateway_control_prev3c], + Mods = [megaco_ber_media_gateway_control_v1, + megaco_ber_media_gateway_control_v2, + megaco_ber_media_gateway_control_prev3c], ?BIN_LIB:decode_mini_message_dynamic(EC, Bin, Mods, binary); decode_mini_message([{version3,prev3b}|EC], dynamic, Bin) -> - Mods = [megaco_ber_bin_media_gateway_control_v1, - megaco_ber_bin_media_gateway_control_v2, - megaco_ber_bin_media_gateway_control_prev3b], + Mods = [megaco_ber_media_gateway_control_v1, + megaco_ber_media_gateway_control_v2, + megaco_ber_media_gateway_control_prev3b], ?BIN_LIB:decode_mini_message_dynamic(EC, Bin, Mods, binary); decode_mini_message([{version3,prev3a}|EC], dynamic, Bin) -> - Mods = [megaco_ber_bin_media_gateway_control_v1, - megaco_ber_bin_media_gateway_control_v2, - megaco_ber_bin_media_gateway_control_prev3a], + Mods = [megaco_ber_media_gateway_control_v1, + megaco_ber_media_gateway_control_v2, + megaco_ber_media_gateway_control_prev3a], ?BIN_LIB:decode_mini_message_dynamic(EC, Bin, Mods, binary); decode_mini_message(EC, dynamic, Bin) -> - Mods = [megaco_ber_bin_media_gateway_control_v1, - megaco_ber_bin_media_gateway_control_v2, - megaco_ber_bin_media_gateway_control_v3], + Mods = [megaco_ber_media_gateway_control_v1, + megaco_ber_media_gateway_control_v2, + megaco_ber_media_gateway_control_v3], ?BIN_LIB:decode_mini_message_dynamic(EC, Bin, Mods, binary); -decode_mini_message([{version3,_},driver|EC], 1, Bin) -> - AsnMod = megaco_ber_bin_drv_media_gateway_control_v1, - ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); -decode_mini_message([driver|EC], 1, Bin) -> - AsnMod = megaco_ber_bin_drv_media_gateway_control_v1, - ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); decode_mini_message([{version3,_}|EC], 1, Bin) -> - AsnMod = megaco_ber_bin_media_gateway_control_v1, + AsnMod = megaco_ber_media_gateway_control_v1, ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); decode_mini_message(EC, 1, Bin) -> - AsnMod = megaco_ber_bin_media_gateway_control_v1, + AsnMod = megaco_ber_media_gateway_control_v1, ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); -decode_mini_message([{version3,_},driver|EC], 2, Bin) -> - AsnMod = megaco_ber_bin_drv_media_gateway_control_v2, - ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); -decode_mini_message([driver|EC], 2, Bin) -> - AsnMod = megaco_ber_bin_drv_media_gateway_control_v2, - ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); decode_mini_message([{version3,_}|EC], 2, Bin) -> - AsnMod = megaco_ber_bin_media_gateway_control_v2, + AsnMod = megaco_ber_media_gateway_control_v2, ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); decode_mini_message(EC, 2, Bin) -> - AsnMod = megaco_ber_bin_media_gateway_control_v2, + AsnMod = megaco_ber_media_gateway_control_v2, ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); -decode_mini_message([{version3,v3},driver|EC], 3, Bin) -> - AsnMod = megaco_ber_bin_drv_media_gateway_control_v3, - ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); -decode_mini_message([{version3,prev3c},driver|EC], 3, Bin) -> - AsnMod = megaco_ber_bin_drv_media_gateway_control_prev3c, - ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); -decode_mini_message([{version3,prev3b},driver|EC], 3, Bin) -> - AsnMod = megaco_ber_bin_drv_media_gateway_control_prev3b, - ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); -decode_mini_message([{version3,prev3a},driver|EC], 3, Bin) -> - AsnMod = megaco_ber_bin_drv_media_gateway_control_prev3a, - ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); -decode_mini_message([driver|EC], 3, Bin) -> - AsnMod = megaco_ber_bin_drv_media_gateway_control_v3, - ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); decode_mini_message([{version3,v3}|EC], 3, Bin) -> - AsnMod = megaco_ber_bin_media_gateway_control_v3, + AsnMod = megaco_ber_media_gateway_control_v3, ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); decode_mini_message([{version3,prev3c}|EC], 3, Bin) -> - AsnMod = megaco_ber_bin_media_gateway_control_prev3c, + AsnMod = megaco_ber_media_gateway_control_prev3c, ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); decode_mini_message([{version3,prev3b}|EC], 3, Bin) -> - AsnMod = megaco_ber_bin_media_gateway_control_prev3b, + AsnMod = megaco_ber_media_gateway_control_prev3b, ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); decode_mini_message([{version3,prev3a}|EC], 3, Bin) -> - AsnMod = megaco_ber_bin_media_gateway_control_prev3a, + AsnMod = megaco_ber_media_gateway_control_prev3a, ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary); decode_mini_message(EC, 3, Bin) -> - AsnMod = megaco_ber_bin_media_gateway_control_v3, + AsnMod = megaco_ber_media_gateway_control_v3, ?BIN_LIB:decode_mini_message(EC, Bin, AsnMod, binary). diff --git a/lib/megaco/src/binary/megaco_binary_encoder_lib.erl b/lib/megaco/src/binary/megaco_binary_encoder_lib.erl index 967ee93935..262889db39 100644 --- a/lib/megaco/src/binary/megaco_binary_encoder_lib.erl +++ b/lib/megaco/src/binary/megaco_binary_encoder_lib.erl @@ -275,7 +275,7 @@ decode_message_dynamic(_EC, _BadBin, _Mods, _Type) -> {error, no_binary}. -decode_message(EC, Bin, AsnMod, TransMod, binary) -> +decode_message(EC, Bin, AsnMod, TransMod, _) -> case asn1rt:decode(AsnMod, 'MegacoMessage', Bin) of {ok, MegaMsg} -> case EC of @@ -286,19 +286,6 @@ decode_message(EC, Bin, AsnMod, TransMod, binary) -> end; {error, Reason} -> {error, Reason} - end; -decode_message(EC, Bin, AsnMod, TransMod, io_list) -> - ShallowIoList = erlang:binary_to_list(Bin), - case asn1rt:decode(AsnMod, 'MegacoMessage', ShallowIoList) of - {ok, MegaMsg} -> - case EC of - [native] -> - {ok, MegaMsg}; - _ -> - {ok, TransMod:tr_message(MegaMsg, decode, EC)} - end; - {error, Reason} -> - {error, Reason} end. diff --git a/lib/megaco/src/binary/megaco_per_bin_drv_media_gateway_control_prev3a.set.asn b/lib/megaco/src/binary/megaco_per_bin_drv_media_gateway_control_prev3a.set.asn deleted file mode 100644 index b9ba7ffdb4..0000000000 --- a/lib/megaco/src/binary/megaco_per_bin_drv_media_gateway_control_prev3a.set.asn +++ /dev/null @@ -1 +0,0 @@ -MEDIA-GATEWAY-CONTROL-prev3a.asn diff --git a/lib/megaco/src/binary/megaco_per_bin_drv_media_gateway_control_prev3b.set.asn b/lib/megaco/src/binary/megaco_per_bin_drv_media_gateway_control_prev3b.set.asn deleted file mode 100644 index 0437bde310..0000000000 --- a/lib/megaco/src/binary/megaco_per_bin_drv_media_gateway_control_prev3b.set.asn +++ /dev/null @@ -1 +0,0 @@ -MEDIA-GATEWAY-CONTROL-prev3b.asn diff --git a/lib/megaco/src/binary/megaco_per_bin_drv_media_gateway_control_prev3c.set.asn b/lib/megaco/src/binary/megaco_per_bin_drv_media_gateway_control_prev3c.set.asn deleted file mode 100644 index e78055fbad..0000000000 --- a/lib/megaco/src/binary/megaco_per_bin_drv_media_gateway_control_prev3c.set.asn +++ /dev/null @@ -1 +0,0 @@ -MEDIA-GATEWAY-CONTROL-prev3c.asn diff --git a/lib/megaco/src/binary/megaco_per_bin_drv_media_gateway_control_v1.set.asn b/lib/megaco/src/binary/megaco_per_bin_drv_media_gateway_control_v1.set.asn deleted file mode 100644 index 0f5a92dba1..0000000000 --- a/lib/megaco/src/binary/megaco_per_bin_drv_media_gateway_control_v1.set.asn +++ /dev/null @@ -1 +0,0 @@ -MEDIA-GATEWAY-CONTROL-v1.asn diff --git a/lib/megaco/src/binary/megaco_per_bin_drv_media_gateway_control_v2.set.asn b/lib/megaco/src/binary/megaco_per_bin_drv_media_gateway_control_v2.set.asn deleted file mode 100644 index 7fc82b127f..0000000000 --- a/lib/megaco/src/binary/megaco_per_bin_drv_media_gateway_control_v2.set.asn +++ /dev/null @@ -1 +0,0 @@ -MEDIA-GATEWAY-CONTROL-v2.asn diff --git a/lib/megaco/src/binary/megaco_per_bin_drv_media_gateway_control_v3.set.asn b/lib/megaco/src/binary/megaco_per_bin_drv_media_gateway_control_v3.set.asn deleted file mode 100644 index 1d7950a283..0000000000 --- a/lib/megaco/src/binary/megaco_per_bin_drv_media_gateway_control_v3.set.asn +++ /dev/null @@ -1 +0,0 @@ -MEDIA-GATEWAY-CONTROL-v3.asn diff --git a/lib/megaco/src/binary/megaco_per_bin_encoder.erl b/lib/megaco/src/binary/megaco_per_bin_encoder.erl deleted file mode 100644 index f7280f4e04..0000000000 --- a/lib/megaco/src/binary/megaco_per_bin_encoder.erl +++ /dev/null @@ -1,447 +0,0 @@ -%% -%% %CopyrightBegin% -%% -%% Copyright Ericsson AB 2001-2009. All Rights Reserved. -%% -%% The contents of this file are subject to the Erlang Public License, -%% Version 1.1, (the "License"); you may not use this file except in -%% compliance with the License. You should have received a copy of the -%% Erlang Public License along with this software. If not, it can be -%% retrieved online at http://www.erlang.org/. -%% -%% Software distributed under the License is distributed on an "AS IS" -%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See -%% the License for the specific language governing rights and limitations -%% under the License. -%% -%% %CopyrightEnd% -%% - -%% -%%---------------------------------------------------------------------- -%% Purpose : Handle ASN.1 PER encoding of Megaco/H.248 -%%---------------------------------------------------------------------- - --module(megaco_per_bin_encoder). - --behaviour(megaco_encoder). - --export([encode_message/3, decode_message/3, - decode_mini_message/3, - - encode_transaction/3, - encode_action_requests/3, - encode_action_request/3, - encode_action_reply/3, - - version_of/2]). - -%% Backward compatible functions: --export([encode_message/2, decode_message/2]). - --include_lib("megaco/src/engine/megaco_message_internal.hrl"). - --define(V1_ASN1_MOD, megaco_per_bin_media_gateway_control_v1). --define(V2_ASN1_MOD, megaco_per_bin_media_gateway_control_v2). --define(V3_ASN1_MOD, megaco_per_bin_media_gateway_control_v3). --define(PREV3A_ASN1_MOD, megaco_per_bin_media_gateway_control_prev3a). --define(PREV3B_ASN1_MOD, megaco_per_bin_media_gateway_control_prev3b). --define(PREV3C_ASN1_MOD, megaco_per_bin_media_gateway_control_prev3c). --define(V1_ASN1_MOD_DRV, megaco_per_bin_drv_media_gateway_control_v1). --define(V2_ASN1_MOD_DRV, megaco_per_bin_drv_media_gateway_control_v2). --define(V3_ASN1_MOD_DRV, megaco_per_bin_drv_media_gateway_control_v3). --define(PREV3A_ASN1_MOD_DRV, megaco_per_bin_drv_media_gateway_control_prev3a). --define(PREV3B_ASN1_MOD_DRV, megaco_per_bin_drv_media_gateway_control_prev3b). --define(PREV3C_ASN1_MOD_DRV, megaco_per_bin_drv_media_gateway_control_prev3c). - --define(V1_TRANS_MOD, megaco_binary_transformer_v1). --define(V2_TRANS_MOD, megaco_binary_transformer_v2). --define(V3_TRANS_MOD, megaco_binary_transformer_v3). --define(PREV3A_TRANS_MOD, megaco_binary_transformer_prev3a). --define(PREV3B_TRANS_MOD, megaco_binary_transformer_prev3b). --define(PREV3C_TRANS_MOD, megaco_binary_transformer_prev3c). - --define(BIN_LIB, megaco_binary_encoder_lib). - - -%%---------------------------------------------------------------------- -%% Detect (check/get) message version -%% Return {ok, Version} | {error, Reason} -%%---------------------------------------------------------------------- - -version_of([{version3,v3},driver|EC], Binary) -> - Decoders = [?V1_ASN1_MOD_DRV, ?V2_ASN1_MOD_DRV, ?V3_ASN1_MOD_DRV], - ?BIN_LIB:version_of(EC, Binary, 1, Decoders); -version_of([{version3,prev3c},driver|EC], Binary) -> - Decoders = [?V1_ASN1_MOD_DRV, ?V2_ASN1_MOD_DRV, ?PREV3C_ASN1_MOD_DRV], - ?BIN_LIB:version_of(EC, Binary, 1, Decoders); -version_of([{version3,prev3b},driver|EC], Binary) -> - Decoders = [?V1_ASN1_MOD_DRV, ?V2_ASN1_MOD_DRV, ?PREV3B_ASN1_MOD_DRV], - ?BIN_LIB:version_of(EC, Binary, 1, Decoders); -version_of([{version3,prev3a},driver|EC], Binary) -> - Decoders = [?V1_ASN1_MOD_DRV, ?V2_ASN1_MOD_DRV, ?PREV3A_ASN1_MOD_DRV], - ?BIN_LIB:version_of(EC, Binary, 1, Decoders); -version_of([driver|EC], Binary) -> - Decoders = [?V1_ASN1_MOD_DRV, ?V2_ASN1_MOD_DRV, ?V3_ASN1_MOD_DRV], - ?BIN_LIB:version_of(EC, Binary, 1, Decoders); -version_of([{version3,v3}|EC], Binary) -> - Decoders = [?V1_ASN1_MOD, ?V2_ASN1_MOD, ?V3_ASN1_MOD], - ?BIN_LIB:version_of(EC, Binary, 1, Decoders); -version_of([{version3,prev3c}|EC], Binary) -> - Decoders = [?V1_ASN1_MOD, ?V2_ASN1_MOD, ?PREV3C_ASN1_MOD], - ?BIN_LIB:version_of(EC, Binary, 1, Decoders); -version_of([{version3,prev3b}|EC], Binary) -> - Decoders = [?V1_ASN1_MOD, ?V2_ASN1_MOD, ?PREV3B_ASN1_MOD], - ?BIN_LIB:version_of(EC, Binary, 1, Decoders); -version_of([{version3,prev3a}|EC], Binary) -> - Decoders = [?V1_ASN1_MOD, ?V2_ASN1_MOD, ?PREV3A_ASN1_MOD], - ?BIN_LIB:version_of(EC, Binary, 1, Decoders); - -%% All values we need to take (special) care of has been delt with, -%% so just pass the rest on -version_of(EC, Binary) -> - Decoders = [?V1_ASN1_MOD, ?V2_ASN1_MOD, ?V3_ASN1_MOD], - ?BIN_LIB:version_of(EC, Binary, 1, Decoders). - - -%%---------------------------------------------------------------------- -%% Convert a 'MegacoMessage' record into a binary -%% Return {ok, Binary} | {error, Reason} -%%---------------------------------------------------------------------- - -encode_message(EC, - #'MegacoMessage'{mess = #'Message'{version = V}} = MegaMsg) -> - encode_message(EC, V, MegaMsg). - - -%% -- Version 1 -- - -encode_message([{version3, _},driver|EC], 1, MegaMsg) -> - AsnMod = ?V1_ASN1_MOD_DRV, - TransMod = ?V1_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); -encode_message([driver|EC], 1, MegaMsg) -> - AsnMod = ?V1_ASN1_MOD_DRV, - TransMod = ?V1_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); -encode_message([{version3,_}|EC], 1, MegaMsg) -> - AsnMod = ?V1_ASN1_MOD, - TransMod = ?V1_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); - -%% All values we need to take (special) care of has been delt with, -%% so just pass the rest on -encode_message(EC, 1, MegaMsg) -> - AsnMod = ?V1_ASN1_MOD, - TransMod = ?V1_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); - - -%% -- Version 2 -- - -encode_message([{version3,_},driver|EC], 2, MegaMsg) -> - AsnMod = ?V2_ASN1_MOD_DRV, - TransMod = ?V2_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); -encode_message([driver|EC], 2, MegaMsg) -> - AsnMod = ?V2_ASN1_MOD_DRV, - TransMod = ?V2_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); -encode_message([{version3,_}|EC], 2, MegaMsg) -> - AsnMod = ?V2_ASN1_MOD, - TransMod = ?V2_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); - -%% All values we need to take (special) care of has been delt with, -%% so just pass the rest on -encode_message(EC, 2, MegaMsg) -> - AsnMod = ?V2_ASN1_MOD, - TransMod = ?V2_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); - - -%% -- Version 3 -- - -encode_message([{version3,v3},driver|EC], 3, MegaMsg) -> - AsnMod = ?V3_ASN1_MOD_DRV, - TransMod = ?V3_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); -encode_message([{version3,prev3c},driver|EC], 3, MegaMsg) -> - AsnMod = ?PREV3C_ASN1_MOD_DRV, - TransMod = ?PREV3C_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); -encode_message([{version3,prev3b},driver|EC], 3, MegaMsg) -> - AsnMod = ?PREV3B_ASN1_MOD_DRV, - TransMod = ?PREV3B_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); -encode_message([{version3,prev3a},driver|EC], 3, MegaMsg) -> - AsnMod = ?PREV3A_ASN1_MOD_DRV, - TransMod = ?PREV3A_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); -encode_message([driver|EC], 3, MegaMsg) -> - AsnMod = ?V3_ASN1_MOD_DRV, - TransMod = ?V3_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); -encode_message([{version3,v3}|EC], 3, MegaMsg) -> - AsnMod = ?V3_ASN1_MOD, - TransMod = ?V3_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); -encode_message([{version3,prev3c}|EC], 3, MegaMsg) -> - AsnMod = ?PREV3C_ASN1_MOD, - TransMod = ?PREV3C_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); -encode_message([{version3,prev3b}|EC], 3, MegaMsg) -> - AsnMod = ?PREV3B_ASN1_MOD, - TransMod = ?PREV3B_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); -encode_message([{version3,prev3a}|EC], 3, MegaMsg) -> - AsnMod = ?PREV3A_ASN1_MOD, - TransMod = ?PREV3A_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list); - -%% All values we need to take (special) care of has been delt with, -%% so just pass the rest on -encode_message(EC, 3, MegaMsg) -> - AsnMod = ?V3_ASN1_MOD, - TransMod = ?V3_TRANS_MOD, - ?BIN_LIB:encode_message(EC, MegaMsg, AsnMod, TransMod, io_list). - - -%%---------------------------------------------------------------------- -%% Convert a transaction (or transactions in the case of ack) record(s) -%% into a binary -%% Return {ok, Binary} | {error, Reason} -%%---------------------------------------------------------------------- - -%% encode_transaction([] = EC, 1, Trans) -> -%% AsnMod = ?V1_ASN1_MOD, -%% TransMod = ?V1_TRANS_MOD, -%% ?BIN_LIB:encode_transaction(EC, Trans, AsnMod, TransMod, -%% io_list); -%% encode_transaction([native] = EC, 1, Trans) -> -%% AsnMod = ?V1_ASN1_MOD, -%% TransMod = ?V1_TRANS_MOD, -%% ?BIN_LIB:encode_transaction(EC, Trans, AsnMod, TransMod, -%% io_list); -%% encode_transaction([driver|EC], 1, Trans) -> -%% AsnMod = ?V1_ASN1_MOD_DRV, -%% TransMod = ?V1_TRANS_MOD, -%% ?BIN_LIB:encode_transaction(EC, Trans, AsnMod, TransMod, -%% io_list); -encode_transaction(_EC, 1, _Trans) -> - %% AsnMod = ?V1_ASN1_MOD, - %% TransMod = ?V1_TRANS_MOD, - %% ?BIN_LIB:encode_transaction(EC, Trans, AsnMod, TransMod, - %% io_list); - {error, not_implemented}; - -%% encode_transaction([] = EC, 2, Trans) -> -%% AsnMod = ?V2_ASN1_MOD, -%% TransMod = ?V2_TRANS_MOD, -%% ?BIN_LIB:encode_transaction(EC, Trans, AsnMod, TransMod, -%% io_list); -%% encode_transaction([native] = EC, 2, Trans) -> -%% AsnMod = ?V2_ASN1_MOD, -%% TransMod = ?V2_TRANS_MOD, -%% ?BIN_LIB:encode_transaction(EC, Trans, AsnMod, TransMod, -%% io_list); -%% encode_transaction([driver|EC], 2, Trans) -> -%% AsnMod = ?V2_ASN1_MOD_DRV, -%% TransMod = ?V2_TRANS_MOD, -%% ?BIN_LIB:encode_transaction(EC, Trans, AsnMod, TransMod, -%% io_list); -encode_transaction(_EC, 2, _Trans) -> - %% AsnMod = ?V2_ASN1_MOD, - %% TransMod = ?V2_TRANS_MOD, - %% ?BIN_LIB:encode_transaction(EC, Trans, AsnMod, TransMod, - %% io_list). - {error, not_implemented}; - -%% encode_transaction([] = EC, 3, Trans) -> -%% AsnMod = ?V3_ASN1_MOD, -%% TransMod = ?V3_TRANS_MOD, -%% ?BIN_LIB:encode_transaction(EC, Trans, AsnMod, TransMod, -%% io_list); -%% encode_transaction([native] = EC, 3, Trans) -> -%% AsnMod = ?V3_ASN1_MOD, -%% TransMod = ?V3_TRANS_MOD, -%% ?BIN_LIB:encode_transaction(EC, Trans, AsnMod, TransMod, -%% io_list); -%% encode_transaction([driver|EC], 3, Trans) -> -%% AsnMod = ?V3_ASN1_MOD_DRV, -%% TransMod = ?V3_TRANS_MOD, -%% ?BIN_LIB:encode_transaction(EC, Trans, AsnMod, TransMod, -%% io_list); -encode_transaction(_EC, 3, _Trans) -> - %% AsnMod = ?V3_ASN1_MOD, - %% TransMod = ?V3_TRANS_MOD, - %% ?BIN_LIB:encode_transaction(EC, Trans, AsnMod, TransMod, %% io_list). - {error, not_implemented}. - - -%%---------------------------------------------------------------------- -%% Convert a list of ActionRequest record's into a binary -%% Return {ok, DeepIoList} | {error, Reason} -%%---------------------------------------------------------------------- -encode_action_requests(_EC, 1, ActReqs) when is_list(ActReqs) -> - %% ?BIN_LIB:encode_action_requests(EC, ActReqs, - %% ?V1_ASN1_MOD, - %% ?V1_TRANS_MOD, - %% io_list); - {error, not_implemented}; -encode_action_requests(_EC, 2, ActReqs) when is_list(ActReqs) -> - %% ?BIN_LIB:encode_action_requests(EC, ActReqs, - %% ?V1_ASN1_MOD, - %% ?V1_TRANS_MOD, - %% io_list). - {error, not_implemented}; -encode_action_requests(_EC, 3, ActReqs) when is_list(ActReqs) -> - %% ?BIN_LIB:encode_action_requests(EC, ActReqs, - %% ?V1_ASN1_MOD, - %% ?V1_TRANS_MOD, - %% io_list). - {error, not_implemented}. - - -%%---------------------------------------------------------------------- -%% Convert a ActionRequest record into a binary -%% Return {ok, DeepIoList} | {error, Reason} -%%---------------------------------------------------------------------- -encode_action_request(_EC, 1, _ActReq) -> - %% ?BIN_LIB:encode_action_request(EC, ActReq, - %% ?V1_ASN1_MOD, - %% ?V1_TRANS_MOD, - %% io_list); - {error, not_implemented}; -encode_action_request(_EC, 2, _ActReq) -> - %% ?BIN_LIB:encode_action_request(EC, ActReq, - %% ?V1_ASN1_MOD, - %% ?V1_TRANS_MOD, - %% io_list). - {error, not_implemented}; -encode_action_request(_EC, 3, _ActReq) -> - %% ?BIN_LIB:encode_action_request(EC, ActReq, - %% ?V1_ASN1_MOD, - %% ?V1_TRANS_MOD, - %% io_list). - {error, not_implemented}. - - -%%---------------------------------------------------------------------- -%% Convert a action reply into a deep io list -%% Not yest supported by this binary codec! -%% Return {ok, DeepIoList} | {error, Reason} -%%---------------------------------------------------------------------- - -encode_action_reply(_EC, _V, _AcionReply) -> - {error, not_implemented}. - - -%%---------------------------------------------------------------------- -%% Convert a binary into a 'MegacoMessage' record -%% Return {ok, MegacoMessageRecord} | {error, Reason} -%%---------------------------------------------------------------------- - -decode_message(EC, Binary) -> - decode_message(EC, 1, Binary). - -%% PER does not support partial decode, so this means V1 -decode_message(EC, dynamic, Binary) -> - decode_message(EC, 1, Binary); - - -%% -- Version 1 -- - -decode_message([{version3,_},driver|EC], 1, Binary) -> - AsnMod = ?V1_ASN1_MOD_DRV, - TransMod = ?V1_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); -decode_message([driver|EC], 1, Binary) -> - AsnMod = ?V1_ASN1_MOD_DRV, - TransMod = ?V1_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); -decode_message([{version3,_}|EC], 1, Binary) -> - AsnMod = ?V1_ASN1_MOD, - TransMod = ?V1_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); - -%% All values we need to take (special) care of has been delt with, -%% so just pass the rest on -decode_message(EC, 1, Binary) -> - AsnMod = ?V1_ASN1_MOD, - TransMod = ?V1_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); - - -%% -- Version 2 -- - -decode_message([{version3,_},driver|EC], 2, Binary) -> - AsnMod = ?V2_ASN1_MOD_DRV, - TransMod = ?V2_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); -decode_message([driver|EC], 2, Binary) -> - AsnMod = ?V2_ASN1_MOD_DRV, - TransMod = ?V2_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); -decode_message([{version3,_}|EC], 2, Binary) -> - AsnMod = ?V2_ASN1_MOD, - TransMod = ?V2_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); - -%% All values we need to take (special) care of has been delt with, -%% so just pass the rest on -decode_message(EC, 2, Binary) -> - AsnMod = ?V2_ASN1_MOD, - TransMod = ?V2_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); - - -%% -- Version 3 -- - -decode_message([{version3,v3},driver|EC], 3, Binary) -> - AsnMod = ?V3_ASN1_MOD_DRV, - TransMod = ?V3_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); -decode_message([{version3,prev3c},driver|EC], 3, Binary) -> - AsnMod = ?PREV3C_ASN1_MOD_DRV, - TransMod = ?PREV3C_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); -decode_message([{version3,prev3b},driver|EC], 3, Binary) -> - AsnMod = ?PREV3B_ASN1_MOD_DRV, - TransMod = ?PREV3B_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); -decode_message([{version3,prev3a},driver|EC], 3, Binary) -> - AsnMod = ?PREV3A_ASN1_MOD_DRV, - TransMod = ?PREV3A_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); -decode_message([driver|EC], 3, Binary) -> - AsnMod = ?V3_ASN1_MOD_DRV, - TransMod = ?V3_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); -decode_message([{version3,v3}|EC], 3, Binary) -> - AsnMod = ?V3_ASN1_MOD, - TransMod = ?V3_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); -decode_message([{version3,prev3c}|EC], 3, Binary) -> - AsnMod = ?PREV3C_ASN1_MOD, - TransMod = ?PREV3C_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); -decode_message([{version3,prev3b}|EC], 3, Binary) -> - AsnMod = ?PREV3B_ASN1_MOD, - TransMod = ?PREV3B_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); -decode_message([{version3,prev3a}|EC], 3, Binary) -> - AsnMod = ?PREV3A_ASN1_MOD, - TransMod = ?PREV3A_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary); - -%% All values we need to take (special) care of has been delt with, -%% so just pass the rest on -decode_message(EC, 3, Binary) -> - AsnMod = ?V3_ASN1_MOD, - TransMod = ?V3_TRANS_MOD, - ?BIN_LIB:decode_message(EC, Binary, AsnMod, TransMod, binary). - - -decode_mini_message(_EC, _Vsn, _Bin) -> - {error, not_implemented}. diff --git a/lib/megaco/src/binary/megaco_per_bin_media_gateway_control_prev3a.set.asn b/lib/megaco/src/binary/megaco_per_bin_media_gateway_control_prev3a.set.asn deleted file mode 100644 index b9ba7ffdb4..0000000000 --- a/lib/megaco/src/binary/megaco_per_bin_media_gateway_control_prev3a.set.asn +++ /dev/null @@ -1 +0,0 @@ -MEDIA-GATEWAY-CONTROL-prev3a.asn diff --git a/lib/megaco/src/binary/megaco_per_bin_media_gateway_control_prev3b.set.asn b/lib/megaco/src/binary/megaco_per_bin_media_gateway_control_prev3b.set.asn deleted file mode 100644 index 0437bde310..0000000000 --- a/lib/megaco/src/binary/megaco_per_bin_media_gateway_control_prev3b.set.asn +++ /dev/null @@ -1 +0,0 @@ -MEDIA-GATEWAY-CONTROL-prev3b.asn diff --git a/lib/megaco/src/binary/megaco_per_bin_media_gateway_control_prev3c.set.asn b/lib/megaco/src/binary/megaco_per_bin_media_gateway_control_prev3c.set.asn deleted file mode 100644 index e78055fbad..0000000000 --- a/lib/megaco/src/binary/megaco_per_bin_media_gateway_control_prev3c.set.asn +++ /dev/null @@ -1 +0,0 @@ -MEDIA-GATEWAY-CONTROL-prev3c.asn diff --git a/lib/megaco/src/binary/megaco_per_bin_media_gateway_control_v1.set.asn b/lib/megaco/src/binary/megaco_per_bin_media_gateway_control_v1.set.asn deleted file mode 100644 index 0f5a92dba1..0000000000 --- a/lib/megaco/src/binary/megaco_per_bin_media_gateway_control_v1.set.asn +++ /dev/null @@ -1 +0,0 @@ -MEDIA-GATEWAY-CONTROL-v1.asn diff --git a/lib/megaco/src/binary/megaco_per_bin_media_gateway_control_v2.set.asn b/lib/megaco/src/binary/megaco_per_bin_media_gateway_control_v2.set.asn deleted file mode 100644 index 7fc82b127f..0000000000 --- a/lib/megaco/src/binary/megaco_per_bin_media_gateway_control_v2.set.asn +++ /dev/null @@ -1 +0,0 @@ -MEDIA-GATEWAY-CONTROL-v2.asn diff --git a/lib/megaco/src/binary/megaco_per_bin_media_gateway_control_v3.set.asn b/lib/megaco/src/binary/megaco_per_bin_media_gateway_control_v3.set.asn deleted file mode 100644 index 1d7950a283..0000000000 --- a/lib/megaco/src/binary/megaco_per_bin_media_gateway_control_v3.set.asn +++ /dev/null @@ -1 +0,0 @@ -MEDIA-GATEWAY-CONTROL-v3.asn diff --git a/lib/megaco/src/binary/modules.mk b/lib/megaco/src/binary/modules.mk index a86ce2aecc..bbaf087ceb 100644 --- a/lib/megaco/src/binary/modules.mk +++ b/lib/megaco/src/binary/modules.mk @@ -27,19 +27,6 @@ MODULES = \ megaco_ber_media_gateway_control_prev3b \ megaco_ber_media_gateway_control_prev3c \ megaco_ber_media_gateway_control_v3 \ - megaco_ber_bin_encoder \ - megaco_ber_bin_media_gateway_control_v1 \ - megaco_ber_bin_media_gateway_control_v2 \ - megaco_ber_bin_media_gateway_control_prev3a \ - megaco_ber_bin_media_gateway_control_prev3b \ - megaco_ber_bin_media_gateway_control_prev3c \ - megaco_ber_bin_media_gateway_control_v3 \ - megaco_ber_bin_drv_media_gateway_control_v1 \ - megaco_ber_bin_drv_media_gateway_control_v2 \ - megaco_ber_bin_drv_media_gateway_control_prev3a \ - megaco_ber_bin_drv_media_gateway_control_prev3b \ - megaco_ber_bin_drv_media_gateway_control_prev3c \ - megaco_ber_bin_drv_media_gateway_control_v3 \ megaco_per_encoder \ megaco_per_media_gateway_control_v1 \ megaco_per_media_gateway_control_v2 \ @@ -47,19 +34,6 @@ MODULES = \ megaco_per_media_gateway_control_prev3b \ megaco_per_media_gateway_control_prev3c \ megaco_per_media_gateway_control_v3 \ - megaco_per_bin_encoder \ - megaco_per_bin_media_gateway_control_v1 \ - megaco_per_bin_media_gateway_control_v2 \ - megaco_per_bin_media_gateway_control_prev3a \ - megaco_per_bin_media_gateway_control_prev3b \ - megaco_per_bin_media_gateway_control_prev3c \ - megaco_per_bin_media_gateway_control_v3 \ - megaco_per_bin_drv_media_gateway_control_v1 \ - megaco_per_bin_drv_media_gateway_control_v2 \ - megaco_per_bin_drv_media_gateway_control_prev3a \ - megaco_per_bin_drv_media_gateway_control_prev3b \ - megaco_per_bin_drv_media_gateway_control_prev3c \ - megaco_per_bin_drv_media_gateway_control_v3 \ megaco_binary_name_resolver_v1 \ megaco_binary_name_resolver_v2 \ megaco_binary_name_resolver_prev3a \ @@ -85,44 +59,20 @@ ASN1_PREV3C_SPEC = MEDIA-GATEWAY-CONTROL-prev3c ASN1_V3_SPEC = MEDIA-GATEWAY-CONTROL-v3 BER_ASN1_V1_SPEC = megaco_ber_media_gateway_control_v1 -BER_BIN_ASN1_V1_SPEC = megaco_ber_bin_media_gateway_control_v1 -BER_BIN_DRV_ASN1_V1_SPEC = megaco_ber_bin_drv_media_gateway_control_v1 PER_ASN1_V1_SPEC = megaco_per_media_gateway_control_v1 -PER_BIN_ASN1_V1_SPEC = megaco_per_bin_media_gateway_control_v1 -PER_BIN_DRV_ASN1_V1_SPEC = megaco_per_bin_drv_media_gateway_control_v1 BER_ASN1_V2_SPEC = megaco_ber_media_gateway_control_v2 -BER_BIN_ASN1_V2_SPEC = megaco_ber_bin_media_gateway_control_v2 -BER_BIN_DRV_ASN1_V2_SPEC = megaco_ber_bin_drv_media_gateway_control_v2 PER_ASN1_V2_SPEC = megaco_per_media_gateway_control_v2 -PER_BIN_ASN1_V2_SPEC = megaco_per_bin_media_gateway_control_v2 -PER_BIN_DRV_ASN1_V2_SPEC = megaco_per_bin_drv_media_gateway_control_v2 BER_ASN1_PREV3A_SPEC = megaco_ber_media_gateway_control_prev3a -BER_BIN_ASN1_PREV3A_SPEC = megaco_ber_bin_media_gateway_control_prev3a -BER_BIN_DRV_ASN1_PREV3A_SPEC = megaco_ber_bin_drv_media_gateway_control_prev3a PER_ASN1_PREV3A_SPEC = megaco_per_media_gateway_control_prev3a -PER_BIN_ASN1_PREV3A_SPEC = megaco_per_bin_media_gateway_control_prev3a -PER_BIN_DRV_ASN1_PREV3A_SPEC = megaco_per_bin_drv_media_gateway_control_prev3a BER_ASN1_PREV3B_SPEC = megaco_ber_media_gateway_control_prev3b -BER_BIN_ASN1_PREV3B_SPEC = megaco_ber_bin_media_gateway_control_prev3b -BER_BIN_DRV_ASN1_PREV3B_SPEC = megaco_ber_bin_drv_media_gateway_control_prev3b PER_ASN1_PREV3B_SPEC = megaco_per_media_gateway_control_prev3b -PER_BIN_ASN1_PREV3B_SPEC = megaco_per_bin_media_gateway_control_prev3b -PER_BIN_DRV_ASN1_PREV3B_SPEC = megaco_per_bin_drv_media_gateway_control_prev3b BER_ASN1_PREV3C_SPEC = megaco_ber_media_gateway_control_prev3c -BER_BIN_ASN1_PREV3C_SPEC = megaco_ber_bin_media_gateway_control_prev3c -BER_BIN_DRV_ASN1_PREV3C_SPEC = megaco_ber_bin_drv_media_gateway_control_prev3c PER_ASN1_PREV3C_SPEC = megaco_per_media_gateway_control_prev3c -PER_BIN_ASN1_PREV3C_SPEC = megaco_per_bin_media_gateway_control_prev3c -PER_BIN_DRV_ASN1_PREV3C_SPEC = megaco_per_bin_drv_media_gateway_control_prev3c BER_ASN1_V3_SPEC = megaco_ber_media_gateway_control_v3 -BER_BIN_ASN1_V3_SPEC = megaco_ber_bin_media_gateway_control_v3 -BER_BIN_DRV_ASN1_V3_SPEC = megaco_ber_bin_drv_media_gateway_control_v3 PER_ASN1_V3_SPEC = megaco_per_media_gateway_control_v3 -PER_BIN_ASN1_V3_SPEC = megaco_per_bin_media_gateway_control_v3 -PER_BIN_DRV_ASN1_V3_SPEC = megaco_per_bin_drv_media_gateway_control_v3 diff --git a/lib/megaco/test/megaco_actions_test.erl b/lib/megaco/test/megaco_actions_test.erl index 2efb6e834a..6d0e80281d 100644 --- a/lib/megaco/test/megaco_actions_test.erl +++ b/lib/megaco/test/megaco_actions_test.erl @@ -80,8 +80,7 @@ end_per_testcase(Case, Config) -> all() -> [pretty_text, flex_pretty_text, compact_text, - flex_compact_text, erl_dist, erl_dist_mc, ber_bin, - ber_bin_drv, ber_bin_native, ber_bin_drv_native]. + flex_compact_text, erl_dist, erl_dist_mc]. groups() -> []. @@ -170,39 +169,6 @@ erl_dist_mc(Config) when is_list(Config) -> req_and_rep(Config, Codec, Version, EncodingConfig). -ber_bin(suite) -> - []; -ber_bin(doc) -> - []; -ber_bin(Config) when is_list(Config) -> - ?SKIP(currently_not_supported_by_asn1). - - -ber_bin_drv(suite) -> - []; -ber_bin_drv(doc) -> - []; -ber_bin_drv(Config) when is_list(Config) -> - ?SKIP(currently_not_supported_by_asn1). - - -ber_bin_native(suite) -> - []; -ber_bin_native(doc) -> - []; -ber_bin_native(Config) when is_list(Config) -> - ?SKIP(currently_not_supported_by_asn1). - - -ber_bin_drv_native(suite) -> - []; -ber_bin_drv_native(doc) -> - []; -ber_bin_drv_native(Config) when is_list(Config) -> - ?SKIP(currently_not_supported_by_asn1). - - - %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% req_and_rep(Config, Codec, _Version, EC) when is_list(Config) -> diff --git a/lib/megaco/test/megaco_call_flow_test.erl b/lib/megaco/test/megaco_call_flow_test.erl index b9d64ca8b2..d5888018cd 100644 --- a/lib/megaco/test/megaco_call_flow_test.erl +++ b/lib/megaco/test/megaco_call_flow_test.erl @@ -25,7 +25,6 @@ %% megaco_call_flow_test:compact_text(). %% megaco_call_flow_test:bin(). %% megaco_call_flow_test:asn1_ber(). -%% megaco_call_flow_test:asn1_ber_bin(). %% megaco_call_flow_test:asn1_per(). %% megaco_call_flow_test:erl_dist(). %% megaco_call_flow_test:compressed_erl_dist(). @@ -62,7 +61,7 @@ all() -> groups() -> [{text, [], [pretty, compact]}, {flex, [], [pretty_flex, compact_flex]}, - {binary, [], [bin, ber, ber_bin, per]}]. + {binary, [], [bin, ber, per]}]. init_per_group(_GroupName, Config) -> Config. @@ -106,12 +105,6 @@ ber(Config) when is_list(Config) -> ?ACQUIRE_NODES(1, Config), asn1_ber(). -ber_bin(suite) -> - []; -ber_bin(Config) when is_list(Config) -> - ?ACQUIRE_NODES(1, Config), - asn1_ber_bin(). - per(suite) -> []; per(Config) when is_list(Config) -> @@ -1198,8 +1191,7 @@ encoders() -> {megaco_pretty_text_encoder, [], []}, {megaco_compact_text_encoder, [], []}, {megaco_binary_encoder, [], [native]}, - %% {megaco_ber_encoder, [], [native]}, - %% {megaco_ber_bin_encoder, [], [native]}, + {megaco_ber_encoder, [], [native]}, {megaco_per_encoder, [], [native]}, {megaco_erl_dist_encoder, [], []}, {megaco_erl_dist_encoder, [compressed], [compressed]} @@ -1214,7 +1206,6 @@ pretty_mod({Mod, Opt, _Opt2}) -> megaco_compact_text_encoder -> compact_text; megaco_binary_encoder -> asn1_ber; megaco_ber_encoder -> asn1_ber_old; - megaco_ber_bin_encoder -> asn1_ber_bin; megaco_per_encoder -> asn1_per; megaco_erl_dist_encoder when Opt == [] -> standard_erl; megaco_erl_dist_encoder when Opt == [compressed] -> compressed_erl; @@ -1263,13 +1254,6 @@ asn1_ber() -> All = [encode(Slogan, Msg, Encoder) || {Slogan, Msg} <- messages()], compute_res(All). -asn1_ber_bin() -> - Default = [], - Native = [native], - Encoder = {megaco_ber_bin_encoder, Default, Native}, - All = [encode(Slogan, Msg, Encoder) || {Slogan, Msg} <- messages()], - compute_res(All). - asn1_per() -> Default = [], Native = [native], @@ -1634,7 +1618,7 @@ gen_ber_header() -> %% Generate headerfile for asn.1 BER test in C %%---------------------------------------------------------------------- gen_ber_bin_header() -> - Encoder = {megaco_ber_bin_encoder, [], []}, + Encoder = {megaco_ber_encoder, [], []}, L = [{S, gen_byte_msg(Msg, Encoder)} || {S, Msg} <- messages()], gen_header_file_binary(L). diff --git a/lib/megaco/test/megaco_codec_prev3a_test.erl b/lib/megaco/test/megaco_codec_prev3a_test.erl index d50e72aef1..4f1160b93f 100644 --- a/lib/megaco/test/megaco_codec_prev3a_test.erl +++ b/lib/megaco/test/megaco_codec_prev3a_test.erl @@ -63,12 +63,8 @@ ber_test_msgs/1, - ber_bin_test_msgs/1, - per_test_msgs/1, - per_bin_test_msgs/1, - erl_dist_m_test_msgs/1, tickets/0, @@ -280,17 +276,14 @@ groups() -> [{group, pretty}, {group, flex_pretty}, {group, compact}, {group, flex_compact}]}, {binary, [], - [{group, bin}, {group, ber}, {group, ber_bin}, - {group, per}, {group, per_bin}]}, + [{group, bin}, {group, ber}, {group, per}]}, {erl_dist, [], [{group, erl_dist_m}]}, {pretty, [], [pretty_test_msgs]}, {compact, [], [compact_test_msgs]}, {flex_pretty, [], flex_pretty_cases()}, {flex_compact, [], flex_compact_cases()}, {bin, [], [bin_test_msgs]}, {ber, [], [ber_test_msgs]}, - {ber_bin, [], [ber_bin_test_msgs]}, {per, [], [per_test_msgs]}, - {per_bin, [], [per_bin_test_msgs]}, {erl_dist_m, [], [erl_dist_m_test_msgs]}, {tickets, [], [{group, compact_tickets}, @@ -1106,17 +1099,6 @@ ber_test_msgs(Config) when is_list(Config) -> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -ber_bin_test_msgs(suite) -> - []; -ber_bin_test_msgs(Config) when is_list(Config) -> - ?ACQUIRE_NODES(1, Config), - Msgs = msgs1(binary) ++ msgs4(binary) ++ msgs5(binary) ++ msgs6(binary), - DynamicDecode = true, - test_msgs(megaco_ber_bin_encoder, DynamicDecode, ?EC, Msgs). - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - per_test_msgs(suite) -> []; per_test_msgs(Config) when is_list(Config) -> @@ -1128,17 +1110,6 @@ per_test_msgs(Config) when is_list(Config) -> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -per_bin_test_msgs(suite) -> - []; -per_bin_test_msgs(Config) when is_list(Config) -> - ?ACQUIRE_NODES(1, Config), - Msgs = msgs1(binary) ++ msgs4(binary) ++ msgs5(binary) ++ msgs6(binary), - DynamicDecode = false, - test_msgs(megaco_per_bin_encoder, DynamicDecode, ?EC, Msgs). - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - erl_dist_m_test_msgs(suite) -> []; erl_dist_m_test_msgs(Config) when is_list(Config) -> diff --git a/lib/megaco/test/megaco_codec_prev3b_test.erl b/lib/megaco/test/megaco_codec_prev3b_test.erl index eaab8f37c1..4bd49365e7 100644 --- a/lib/megaco/test/megaco_codec_prev3b_test.erl +++ b/lib/megaco/test/megaco_codec_prev3b_test.erl @@ -63,12 +63,8 @@ ber_test_msgs/1, - ber_bin_test_msgs/1, - per_test_msgs/1, - per_bin_test_msgs/1, - erl_dist_m_test_msgs/1, tickets/0, @@ -296,17 +292,14 @@ groups() -> [{group, pretty}, {group, flex_pretty}, {group, compact}, {group, flex_compact}]}, {binary, [], - [{group, bin}, {group, ber}, {group, ber_bin}, - {group, per}, {group, per_bin}]}, + [{group, bin}, {group, ber}, {group, per}]}, {erl_dist, [], [{group, erl_dist_m}]}, {pretty, [], [pretty_test_msgs]}, {compact, [], [compact_test_msgs]}, {flex_pretty, [], flex_pretty_cases()}, {flex_compact, [], flex_compact_cases()}, {bin, [], [bin_test_msgs]}, {ber, [], [ber_test_msgs]}, - {ber_bin, [], [ber_bin_test_msgs]}, {per, [], [per_test_msgs]}, - {per_bin, [], [per_bin_test_msgs]}, {erl_dist_m, [], [erl_dist_m_test_msgs]}, {tickets, [], [{group, compact_tickets}, @@ -1171,16 +1164,6 @@ ber_test_msgs(Config) when is_list(Config) -> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -ber_bin_test_msgs(suite) -> - []; -ber_bin_test_msgs(Config) when is_list(Config) -> - ?ACQUIRE_NODES(1, Config), - Msgs = msgs1(binary) ++ msgs4(binary) ++ msgs5(binary) ++ msgs6(binary), - DynamicDecode = true, - test_msgs(megaco_ber_bin_encoder, DynamicDecode, ?EC, Msgs). - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% per_test_msgs(suite) -> []; @@ -1193,17 +1176,6 @@ per_test_msgs(Config) when is_list(Config) -> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -per_bin_test_msgs(suite) -> - []; -per_bin_test_msgs(Config) when is_list(Config) -> - ?ACQUIRE_NODES(1, Config), - Msgs = msgs1(binary) ++ msgs4(binary) ++ msgs5(binary) ++ msgs6(binary), - DynamicDecode = false, - test_msgs(megaco_per_bin_encoder, DynamicDecode, ?EC, Msgs). - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - erl_dist_m_test_msgs(suite) -> []; erl_dist_m_test_msgs(Config) when is_list(Config) -> diff --git a/lib/megaco/test/megaco_codec_prev3c_test.erl b/lib/megaco/test/megaco_codec_prev3c_test.erl index 7f9c0fe4e7..baa1c7f547 100644 --- a/lib/megaco/test/megaco_codec_prev3c_test.erl +++ b/lib/megaco/test/megaco_codec_prev3c_test.erl @@ -65,12 +65,8 @@ ber_test_msgs/1, - ber_bin_test_msgs/1, - per_test_msgs/1, - per_bin_test_msgs/1, - erl_dist_m_test_msgs/1, tickets/0, @@ -301,17 +297,14 @@ groups() -> [{group, pretty}, {group, flex_pretty}, {group, compact}, {group, flex_compact}]}, {binary, [], - [{group, bin}, {group, ber}, {group, ber_bin}, - {group, per}, {group, per_bin}]}, + [{group, bin}, {group, ber}, {group, per}]}, {erl_dist, [], [{group, erl_dist_m}]}, {pretty, [], [pretty_test_msgs]}, {compact, [], [compact_test_msgs]}, {flex_pretty, [], flex_pretty_cases()}, {flex_compact, [], flex_compact_cases()}, {bin, [], [bin_test_msgs]}, {ber, [], [ber_test_msgs]}, - {ber_bin, [], [ber_bin_test_msgs]}, {per, [], [per_test_msgs]}, - {per_bin, [], [per_bin_test_msgs]}, {erl_dist_m, [], [erl_dist_m_test_msgs]}, {tickets, [], [{group, compact_tickets}, @@ -823,21 +816,6 @@ ber_test_msgs(Config) when is_list(Config) -> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -ber_bin_test_msgs(suite) -> - []; -ber_bin_test_msgs(Config) when is_list(Config) -> - ?ACQUIRE_NODES(1, Config), - Msgs = - msgs1a(binary) ++ - msgs5(binary) ++ - msgs6(binary) ++ - msgs7(binary), - DynamicDecode = true, - test_msgs(megaco_ber_bin_encoder, DynamicDecode, ?EC, Msgs). - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - per_test_msgs(suite) -> []; per_test_msgs(Config) when is_list(Config) -> @@ -853,21 +831,6 @@ per_test_msgs(Config) when is_list(Config) -> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -per_bin_test_msgs(suite) -> - []; -per_bin_test_msgs(Config) when is_list(Config) -> - ?ACQUIRE_NODES(1, Config), - Msgs = - msgs1a(binary) ++ - msgs5(binary) ++ - msgs6(binary) ++ - msgs7(binary), - DynamicDecode = false, - test_msgs(megaco_per_bin_encoder, DynamicDecode, ?EC, Msgs). - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - erl_dist_m_test_msgs(suite) -> []; erl_dist_m_test_msgs(Config) when is_list(Config) -> diff --git a/lib/megaco/test/megaco_codec_v1_test.erl b/lib/megaco/test/megaco_codec_v1_test.erl index e9c19605dd..86f332fde0 100644 --- a/lib/megaco/test/megaco_codec_v1_test.erl +++ b/lib/megaco/test/megaco_codec_v1_test.erl @@ -66,12 +66,8 @@ ber_test_msgs/1, - ber_bin_test_msgs/1, - per_test_msgs/1, - per_bin_test_msgs/1, - erl_dist_m_test_msgs/1, tickets/0, @@ -476,9 +472,7 @@ groups() -> {group, flex_compact}]}, {binary, [], [{group, bin}, {group, ber}, - {group, ber_bin}, - {group, per}, - {group, per_bin}]}, + {group, per}]}, {erl_dist, [], [{group, erl_dist_m}]}, {pretty, [], [pretty_test_msgs]}, {compact, [], [compact_test_msgs]}, @@ -486,9 +480,7 @@ groups() -> {flex_compact, [], flex_compact_cases()}, {bin, [], [bin_test_msgs]}, {ber, [], [ber_test_msgs]}, - {ber_bin, [], [ber_bin_test_msgs]}, {per, [], [per_test_msgs]}, - {per_bin, [], [per_bin_test_msgs]}, {erl_dist_m, [], [erl_dist_m_test_msgs]}, {tickets, [], [{group, compact_tickets}, {group, pretty_tickets}, @@ -1266,17 +1258,6 @@ ber_test_msgs(Config) when is_list(Config) -> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -ber_bin_test_msgs(suite) -> - []; -ber_bin_test_msgs(Config) when is_list(Config) -> - ?ACQUIRE_NODES(1, Config), - Msgs = msgs1(), - DynamicDecode = true, - test_msgs(megaco_ber_bin_encoder, DynamicDecode, [], Msgs). - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - per_test_msgs(suite) -> []; per_test_msgs(Config) when is_list(Config) -> @@ -1288,17 +1269,6 @@ per_test_msgs(Config) when is_list(Config) -> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -per_bin_test_msgs(suite) -> - []; -per_bin_test_msgs(Config) when is_list(Config) -> - ?ACQUIRE_NODES(1, Config), - Msgs = msgs1(), - DynamicDecode = false, - test_msgs(megaco_per_bin_encoder, DynamicDecode, [], Msgs). - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - erl_dist_m_test_msgs(suite) -> []; erl_dist_m_test_msgs(Config) when is_list(Config) -> diff --git a/lib/megaco/test/megaco_codec_v2_test.erl b/lib/megaco/test/megaco_codec_v2_test.erl index a44f74166c..e8db9e1cb1 100644 --- a/lib/megaco/test/megaco_codec_v2_test.erl +++ b/lib/megaco/test/megaco_codec_v2_test.erl @@ -64,12 +64,8 @@ ber_test_msgs/1, - ber_bin_test_msgs/1, - per_test_msgs/1, - per_bin_test_msgs/1, - erl_dist_m_test_msgs/1, tickets/0, @@ -447,17 +443,14 @@ groups() -> [{group, pretty}, {group, flex_pretty}, {group, compact}, {group, flex_compact}]}, {binary, [], - [{group, bin}, {group, ber}, {group, ber_bin}, - {group, per}, {group, per_bin}]}, + [{group, bin}, {group, ber}, {group, per}]}, {erl_dist, [], [{group, erl_dist_m}]}, {pretty, [], [pretty_test_msgs]}, {compact, [], [compact_test_msgs]}, {flex_pretty, [], flex_pretty_cases()}, {flex_compact, [], flex_compact_cases()}, {bin, [], [bin_test_msgs]}, {ber, [], [ber_test_msgs]}, - {ber_bin, [], [ber_bin_test_msgs]}, {per, [], [per_test_msgs]}, - {per_bin, [], [per_bin_test_msgs]}, {erl_dist_m, [], [erl_dist_m_test_msgs]}, {tickets, [], [{group, compact_tickets}, {group, pretty_tickets}, @@ -1285,17 +1278,6 @@ ber_test_msgs(Config) when is_list(Config) -> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -ber_bin_test_msgs(suite) -> - []; -ber_bin_test_msgs(Config) when is_list(Config) -> - ?ACQUIRE_NODES(1, Config), - Msgs = msgs1() ++ msgs4(), - DynamicDecode = true, - test_msgs(megaco_ber_bin_encoder, DynamicDecode, [], Msgs). - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - per_test_msgs(suite) -> []; per_test_msgs(Config) when is_list(Config) -> @@ -1307,17 +1289,6 @@ per_test_msgs(Config) when is_list(Config) -> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -per_bin_test_msgs(suite) -> - []; -per_bin_test_msgs(Config) when is_list(Config) -> - ?ACQUIRE_NODES(1, Config), - Msgs = msgs1() ++ msgs4(), - DynamicDecode = false, - test_msgs(megaco_per_bin_encoder, DynamicDecode, [], Msgs). - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - erl_dist_m_test_msgs(suite) -> []; erl_dist_m_test_msgs(Config) when is_list(Config) -> diff --git a/lib/megaco/test/megaco_codec_v3_test.erl b/lib/megaco/test/megaco_codec_v3_test.erl index 2c35ce13b3..67805479f9 100644 --- a/lib/megaco/test/megaco_codec_v3_test.erl +++ b/lib/megaco/test/megaco_codec_v3_test.erl @@ -56,9 +56,7 @@ flex_compact_dm_timers8/1, bin_test_msgs/1, ber_test_msgs/1, - ber_bin_test_msgs/1, per_test_msgs/1, - per_bin_test_msgs/1, erl_dist_m_test_msgs/1, tickets/0, @@ -288,17 +286,14 @@ groups() -> [{group, pretty}, {group, flex_pretty}, {group, compact}, {group, flex_compact}]}, {binary, [], - [{group, bin}, {group, ber}, {group, ber_bin}, - {group, per}, {group, per_bin}]}, + [{group, bin}, {group, ber}, {group, per}]}, {erl_dist, [], [{group, erl_dist_m}]}, {pretty, [], [pretty_test_msgs]}, {compact, [], [compact_test_msgs]}, {flex_pretty, [], flex_pretty_cases()}, {flex_compact, [], flex_compact_cases()}, {bin, [], [bin_test_msgs]}, {ber, [], [ber_test_msgs]}, - {ber_bin, [], [ber_bin_test_msgs]}, {per, [], [per_test_msgs]}, - {per_bin, [], [per_bin_test_msgs]}, {erl_dist_m, [], [erl_dist_m_test_msgs]}, {tickets, [], [{group, compact_tickets}, @@ -823,22 +818,6 @@ ber_test_msgs(Config) when is_list(Config) -> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -ber_bin_test_msgs(suite) -> - []; -ber_bin_test_msgs(Config) when is_list(Config) -> - ?ACQUIRE_NODES(1, Config), - Msgs = - msgs1a(binary) ++ - msgs5(binary) ++ - msgs6(binary) ++ - msgs7(binary) ++ - msgs8(binary), - DynamicDecode = true, - test_msgs(megaco_ber_bin_encoder, DynamicDecode, ?EC, Msgs). - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - per_test_msgs(suite) -> []; per_test_msgs(Config) when is_list(Config) -> @@ -855,22 +834,6 @@ per_test_msgs(Config) when is_list(Config) -> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -per_bin_test_msgs(suite) -> - []; -per_bin_test_msgs(Config) when is_list(Config) -> - ?ACQUIRE_NODES(1, Config), - Msgs = - msgs1a(binary) ++ - msgs5(binary) ++ - msgs6(binary) ++ - msgs7(binary) ++ - msgs8(binary), - DynamicDecode = false, - test_msgs(megaco_per_bin_encoder, DynamicDecode, ?EC, Msgs). - - -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - erl_dist_m_test_msgs(suite) -> []; erl_dist_m_test_msgs(Config) when is_list(Config) -> diff --git a/lib/megaco/test/megaco_mess_test.erl b/lib/megaco/test/megaco_mess_test.erl index 663ac8c329..f8be96c254 100644 --- a/lib/megaco/test/megaco_mess_test.erl +++ b/lib/megaco/test/megaco_mess_test.erl @@ -1393,7 +1393,7 @@ rarpaop_mgc_event_sequence(text, tcp) -> rarpaop_mgc_event_sequence(binary, tcp) -> Port = 2945, TranspMod = megaco_tcp, - EncMod = megaco_ber_bin_encoder, + EncMod = megaco_ber_encoder, EncConf = [], rarpaop_mgc_event_sequence(Port, TranspMod, EncMod, EncConf). @@ -1680,7 +1680,7 @@ rarpaop_mg_event_sequence(text, tcp) -> rarpaop_mg_event_sequence(Port, EncMod, EncConf); rarpaop_mg_event_sequence(binary, tcp) -> Port = 2945, - EncMod = megaco_ber_bin_encoder, + EncMod = megaco_ber_encoder, EncConf = [], rarpaop_mg_event_sequence(Port, EncMod, EncConf). diff --git a/lib/megaco/test/megaco_mib_test.erl b/lib/megaco/test/megaco_mib_test.erl index 52d99d1442..ddc74ab741 100644 --- a/lib/megaco/test/megaco_mib_test.erl +++ b/lib/megaco/test/megaco_mib_test.erl @@ -647,13 +647,13 @@ mk_recv_info([{text,udp}|ET], Acc) -> {port, 2944}], mk_recv_info(ET, [RI|Acc]); mk_recv_info([{binary,tcp}|ET], Acc) -> - RI = [{encoding_module, megaco_ber_bin_encoder}, + RI = [{encoding_module, megaco_ber_encoder}, {encoding_config, []}, {transport_module, megaco_tcp}, {port, 2945}], mk_recv_info(ET, [RI|Acc]); mk_recv_info([{binary,udp}|ET], Acc) -> - RI = [{encoding_module, megaco_ber_bin_encoder}, + RI = [{encoding_module, megaco_ber_encoder}, {encoding_config, []}, {transport_module, megaco_udp}, {port, 2945}], @@ -1013,7 +1013,7 @@ start_mg(Node, Mid, Encoding, Transport, Verbosity) -> {encoding_config, []}, {port,2944}]; binary -> - [{encoding_module, megaco_ber_bin_encoder}, + [{encoding_module, megaco_ber_encoder}, {encoding_config, []}, {port,2945}] end, diff --git a/lib/megaco/test/megaco_test_mg.erl b/lib/megaco/test/megaco_test_mg.erl index ecb3cedc83..947f0eebbb 100644 --- a/lib/megaco/test/megaco_test_mg.erl +++ b/lib/megaco/test/megaco_test_mg.erl @@ -158,7 +158,7 @@ select_encoding(pretty_text) -> select_encoding(compact_text) -> {megaco_compact_text_encoder, 2944}; select_encoding(binary) -> - {megaco_ber_bin_encoder, 2945}; + {megaco_ber_encoder, 2945}; select_encoding(erl_dist) -> {megaco_erl_dist_encoder, 2946}; select_encoding(Encoding) -> diff --git a/lib/megaco/test/megaco_test_mgc.erl b/lib/megaco/test/megaco_test_mgc.erl index 13c1cebe56..a964983861 100644 --- a/lib/megaco/test/megaco_test_mgc.erl +++ b/lib/megaco/test/megaco_test_mgc.erl @@ -135,7 +135,7 @@ select_encoding(pretty_text) -> select_encoding(compact_text) -> {megaco_compact_text_encoder, 2944}; select_encoding(binary) -> - {megaco_ber_bin_encoder, 2945}; + {megaco_ber_encoder, 2945}; select_encoding(erl_dist) -> {megaco_erl_dist_encoder, 2946}; select_encoding(Encoding) -> diff --git a/lib/mnesia/src/mnesia_controller.erl b/lib/mnesia/src/mnesia_controller.erl index d488a33d67..ec67d9ec12 100644 --- a/lib/mnesia/src/mnesia_controller.erl +++ b/lib/mnesia/src/mnesia_controller.erl @@ -593,6 +593,12 @@ multicall(Nodes, Msg) -> {PatchedGood, Bad}. %% Make the replies look like rpc:multicalls.. %% rpc:multicall(Nodes, ?MODULE, call, [Msg]). +next_async_dump_log() -> + Interval = mnesia_monitor:get_env(dump_log_time_threshold), + Msg = {next_async_dump_log, time_threshold}, + Ref = erlang:send_after(Interval, self(), Msg), + Ref. + %%%---------------------------------------------------------------------- %%% Callback functions from gen_server %%%---------------------------------------------------------------------- @@ -614,9 +620,7 @@ init([Parent]) -> mnesia_lib:unset(original_nodes), mnesia_recover:connect_nodes(Diff), - Interval = mnesia_monitor:get_env(dump_log_time_threshold), - Msg = {async_dump_log, time_threshold}, - {ok, Ref} = timer:send_interval(Interval, Msg), + Ref = next_async_dump_log(), mnesia_dumper:start_regulator(), Empty = gb_trees:empty(), @@ -1121,6 +1125,11 @@ handle_sync_tabs([], _From) -> %% {stop, Reason, State} (terminate/2 is called) %%---------------------------------------------------------------------- +handle_info({next_async_dump_log, InitBy}, State) -> + async_dump_log(InitBy), + Ref = next_async_dump_log(), + noreply(State#state{dump_log_timer_ref=Ref}); + handle_info({async_dump_log, InitBy}, State) -> Worker = #dump_log{initiated_by = InitBy}, State2 = add_worker(Worker, State), diff --git a/lib/mnesia/src/mnesia_event.erl b/lib/mnesia/src/mnesia_event.erl index 8085155fd5..9fd0342d31 100644 --- a/lib/mnesia/src/mnesia_event.erl +++ b/lib/mnesia/src/mnesia_event.erl @@ -153,7 +153,7 @@ handle_system_event({mnesia_down, Node}, State) -> end; handle_system_event({mnesia_overload, Details}, State) -> - report_warning("Mnesia is overloaded: ~p~n", [Details]), + report_warning("Mnesia is overloaded: ~w~n", [Details]), {ok, State}; handle_system_event({mnesia_info, Format, Args}, State) -> diff --git a/lib/mnesia/src/mnesia_recover.erl b/lib/mnesia/src/mnesia_recover.erl index 4750291a10..b64f428f15 100644 --- a/lib/mnesia/src/mnesia_recover.erl +++ b/lib/mnesia/src/mnesia_recover.erl @@ -45,7 +45,8 @@ note_log_decision/2, outcome/2, start/0, - start_garb/0, + next_garb/0, + next_check_overload/0, still_pending/1, sync_trans_tid_serial/1, sync/0, @@ -91,10 +92,38 @@ start() -> init() -> call(init). -start_garb() -> +next_garb() -> Pid = whereis(mnesia_recover), - {ok, _} = timer:send_interval(timer:minutes(2), Pid, garb_decisions), - {ok, _} = timer:send_interval(timer:seconds(10), Pid, check_overload). + erlang:send_after(timer:minutes(2), Pid, garb_decisions). + +next_check_overload() -> + Pid = whereis(mnesia_recover), + erlang:send_after(timer:seconds(10), Pid, check_overload). + + +do_check_overload(S) -> + %% Time to check if mnesia_tm is overloaded + case whereis(mnesia_tm) of + Pid when is_pid(Pid) -> + Threshold = 100, + Prev = S#state.tm_queue_len, + {message_queue_len, Len} = + process_info(Pid, message_queue_len), + if + Len > Threshold, Prev > Threshold -> + What = {mnesia_tm, message_queue_len, [Prev, Len]}, + mnesia_lib:report_system_event({mnesia_overload, What}), + mnesia_lib:overload_set(mnesia_tm, true), + S#state{tm_queue_len = 0}; + Len > Threshold -> + S#state{tm_queue_len = Len}; + true -> + mnesia_lib:overload_set(mnesia_tm, false), + S#state{tm_queue_len = 0} + end; + undefined -> + S + end. allow_garb() -> cast(allow_garb). @@ -853,34 +882,13 @@ handle_info({connect_nodes, Ns, From}, State) -> handle_call({connect_nodes,Ns},From,State); handle_info(check_overload, S) -> - %% Time to check if mnesia_tm is overloaded - case whereis(mnesia_tm) of - Pid when is_pid(Pid) -> - - Threshold = 100, - Prev = S#state.tm_queue_len, - {message_queue_len, Len} = - process_info(Pid, message_queue_len), - if - Len > Threshold, Prev > Threshold -> - What = {mnesia_tm, message_queue_len, [Prev, Len]}, - mnesia_lib:report_system_event({mnesia_overload, What}), - mnesia_lib:overload_set(mnesia_tm, true), - {noreply, S#state{tm_queue_len = 0}}; - - Len > Threshold -> - {noreply, S#state{tm_queue_len = Len}}; - - true -> - mnesia_lib:overload_set(mnesia_tm, false), - {noreply, S#state{tm_queue_len = 0}} - end; - undefined -> - {noreply, S} - end; + State2 = do_check_overload(S), + next_check_overload(), + {noreply, State2}; handle_info(garb_decisions, State) -> do_garb_decisions(), + next_garb(), {noreply, State}; handle_info({force_decision, Tid}, State) -> diff --git a/lib/mnesia/src/mnesia_tm.erl b/lib/mnesia/src/mnesia_tm.erl index 0af7f55c06..b5b14ac05b 100644 --- a/lib/mnesia/src/mnesia_tm.erl +++ b/lib/mnesia/src/mnesia_tm.erl @@ -103,7 +103,8 @@ init(Parent) -> end, mnesia_schema:purge_tmp_files(), - mnesia_recover:start_garb(), + mnesia_recover:next_garb(), + mnesia_recover:next_check_overload(), ?eval_debug_fun({?MODULE, init}, [{nodes, AllOthers}]), diff --git a/lib/observer/doc/src/notes.xml b/lib/observer/doc/src/notes.xml index ea665eee88..4ec03782a7 100644 --- a/lib/observer/doc/src/notes.xml +++ b/lib/observer/doc/src/notes.xml @@ -4,7 +4,7 @@ <chapter> <header> <copyright> - <year>2004</year><year>2011</year> + <year>2004</year><year>2012</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> diff --git a/lib/odbc/aclocal.m4 b/lib/odbc/aclocal.m4 index b1cf1fe404..9578cd35c4 100644 --- a/lib/odbc/aclocal.m4 +++ b/lib/odbc/aclocal.m4 @@ -740,11 +740,16 @@ dnl Try to find POSIX threads dnl The usual pthread lib... AC_CHECK_LIB(pthread, pthread_create, THR_LIBS="-lpthread") -dnl FreeBSD has pthreads in special c library, c_r... +dnl Very old versions of FreeBSD have pthreads in special c library, c_r... if test "x$THR_LIBS" = "x"; then AC_CHECK_LIB(c_r, pthread_create, THR_LIBS="-lc_r") fi +dnl QNX has pthreads in standard C library + if test "x$THR_LIBS" = "x"; then + AC_CHECK_FUNC(pthread_create, THR_LIBS="none_needed") + fi + dnl On ofs1 the '-pthread' switch should be used if test "x$THR_LIBS" = "x"; then AC_MSG_CHECKING([if the '-pthread' switch can be used]) @@ -765,6 +770,9 @@ dnl On ofs1 the '-pthread' switch should be used if test "x$THR_LIBS" != "x"; then THR_DEFS="$THR_DEFS -D_THREAD_SAFE -D_REENTRANT -DPOSIX_THREADS" THR_LIB_NAME=pthread + if test "x$THR_LIBS" = "xnone_needed"; then + THR_LIBS= + fi case $host_os in solaris*) THR_DEFS="$THR_DEFS -D_POSIX_PTHREAD_SEMANTICS" ;; diff --git a/lib/odbc/c_src/odbcserver.c b/lib/odbc/c_src/odbcserver.c index fe81d1dd3a..4a7a5224e5 100644 --- a/lib/odbc/c_src/odbcserver.c +++ b/lib/odbc/c_src/odbcserver.c @@ -153,7 +153,7 @@ static db_result_msg db_describe_table(byte *sql, db_state *state); /* ------------- Encode/decode functions -------- ------------------------*/ static db_result_msg encode_empty_message(void); -static db_result_msg encode_error_message(char *reason); +static db_result_msg encode_error_message(char *reason, char *errCode, SQLINTEGER nativeError); static db_result_msg encode_atom_message(char *atom); static db_result_msg encode_result(db_state *state); static db_result_msg encode_result_set(SQLSMALLINT num_of_columns, @@ -230,7 +230,7 @@ static void init_param_statement(int cols, static void map_dec_num_2_c_column(col_type *type, int precision, int scale); -static db_result_msg map_sql_2_c_column(db_column* column); +static db_result_msg map_sql_2_c_column(db_column* column, db_state *state); static param_array * bind_parameter_arrays(byte *buffer, int *index, @@ -246,7 +246,7 @@ static db_result_msg retrive_scrollable_cursor_support_info(db_state static int num_out_params(int num_of_params, param_array* params); /* ------------- Error handling functions --------------------------------*/ -static diagnos get_diagnos(SQLSMALLINT handleType, SQLHANDLE handle); +static diagnos get_diagnos(SQLSMALLINT handleType, SQLHANDLE handle, Boolean extendedErrors); /* ------------- Boolean functions ---------------------------------------*/ @@ -349,7 +349,7 @@ DWORD WINAPI database_handler(const char *port) byte *request_buffer = NULL; db_state state = {NULL, NULL, NULL, NULL, 0, {NULL, 0, 0}, - FALSE, FALSE, FALSE, FALSE, FALSE, FALSE}; + FALSE, FALSE, FALSE, FALSE, FALSE, FALSE, FALSE}; byte request_id; #ifdef WIN32 SOCKET socket; @@ -438,14 +438,16 @@ static db_result_msg db_connect(byte *args, db_state *state) diagnos diagnos; byte *connStrIn; int erl_auto_commit_mode, erl_trace_driver, - use_srollable_cursors, tuple_row_state, binary_strings; + use_srollable_cursors, tuple_row_state, binary_strings, + extended_errors; erl_auto_commit_mode = args[0]; erl_trace_driver = args[1]; use_srollable_cursors = args[2]; tuple_row_state = args[3]; binary_strings = args[4]; - connStrIn = args + 5 * sizeof(byte); + extended_errors = args[5]; + connStrIn = args + 6 * sizeof(byte); if(tuple_row_state == ON) { tuple_row(state) = TRUE; @@ -465,6 +467,12 @@ static db_result_msg db_connect(byte *args, db_state *state) use_srollable_cursors(state) = FALSE; } + if(extended_errors == ON) { + extended_errors(state) = TRUE; + } else { + extended_errors(state) = FALSE; + } + init_driver(erl_auto_commit_mode, erl_trace_driver, state); connlen = (SQLSMALLINT)strlen((const char*)connStrIn); @@ -475,10 +483,10 @@ static db_result_msg db_connect(byte *args, db_state *state) &stringlength2ptr, SQL_DRIVER_NOPROMPT); if (!sql_success(result)) { - diagnos = get_diagnos(SQL_HANDLE_DBC, connection_handle(state)); + diagnos = get_diagnos(SQL_HANDLE_DBC, connection_handle(state), extended_errors(state)); strcat((char *)diagnos.error_msg, " Connection to database failed."); - msg = encode_error_message(diagnos.error_msg); + msg = encode_error_message(diagnos.error_msg, extended_error(state, diagnos.sqlState), diagnos.nativeError ); if(!sql_success(SQLFreeHandle(SQL_HANDLE_DBC, connection_handle(state)))) @@ -509,8 +517,8 @@ static db_result_msg db_close_connection(db_state *state) result = SQLDisconnect(connection_handle(state)); if (!sql_success(result)) { - diagnos = get_diagnos(SQL_HANDLE_DBC, connection_handle(state)); - return encode_error_message(diagnos.error_msg); + diagnos = get_diagnos(SQL_HANDLE_DBC, connection_handle(state), extended_errors(state)); + return encode_error_message(diagnos.error_msg, extended_error(state, diagnos.sqlState), diagnos.nativeError); } if(!sql_success(SQLFreeHandle(SQL_HANDLE_DBC, @@ -536,8 +544,8 @@ static db_result_msg db_end_tran(byte compleationtype, db_state *state) (SQLSMALLINT)compleationtype); if (!sql_success(result)) { - diagnos = get_diagnos(SQL_HANDLE_DBC, connection_handle(state)); - return encode_error_message(diagnos.error_msg); + diagnos = get_diagnos(SQL_HANDLE_DBC, connection_handle(state), extended_errors(state)); + return encode_error_message(diagnos.error_msg, extended_error(state, diagnos.sqlState), diagnos.nativeError); } else { return encode_atom_message("ok"); } @@ -572,7 +580,7 @@ static db_result_msg db_query(byte *sql, db_state *state) /* SQL_SUCCESS_WITH_INFO at this point may indicate an error in user input. */ if (result != SQL_SUCCESS && result != SQL_NO_DATA_FOUND) { - diagnos = get_diagnos(SQL_HANDLE_STMT, statement_handle(state)); + diagnos = get_diagnos(SQL_HANDLE_STMT, statement_handle(state), extended_errors(state)); if(strcmp((char *)diagnos.sqlState, INFO) == 0) { is_error[0] = 0; strncat((char *)is_error, (char *)diagnos.error_msg, @@ -583,12 +591,12 @@ static db_result_msg db_query(byte *sql, db_state *state) it as we want a nice and clean Erlang API */ if((strcmp((char *)is_error, "error") == 0)) { - msg = encode_error_message((char *)diagnos.error_msg); + msg = encode_error_message((char *)diagnos.error_msg, extended_error(state, diagnos.sqlState), diagnos.nativeError); clean_state(state); return msg; } } else { - msg = encode_error_message((char *)diagnos.error_msg); + msg = encode_error_message((char *)diagnos.error_msg, extended_error(state, diagnos.sqlState), diagnos.nativeError); clean_state(state); return msg; } @@ -661,9 +669,9 @@ static db_result_msg db_select_count(byte *sql, db_state *state) } if(!sql_success(SQLExecDirect(statement_handle(state), sql, SQL_NTS))) { - diagnos = get_diagnos(SQL_HANDLE_STMT, statement_handle(state)); + diagnos = get_diagnos(SQL_HANDLE_STMT, statement_handle(state), extended_errors(state)); clean_state(state); - return encode_error_message(diagnos.error_msg); + return encode_error_message(diagnos.error_msg, extended_error(state, diagnos.sqlState), diagnos.nativeError); } if(!sql_success(SQLNumResultCols(statement_handle(state), @@ -803,13 +811,13 @@ static db_result_msg db_param_query(byte *buffer, db_state *state) result = SQLExecDirect(statement_handle(state), sql, SQL_NTS); if (!sql_success(result) || result == SQL_NO_DATA) { - diagnos = get_diagnos(SQL_HANDLE_STMT, statement_handle(state)); + diagnos = get_diagnos(SQL_HANDLE_STMT, statement_handle(state), extended_errors(state)); } /* SQL_NO_DATA and SQLSTATE 00000 indicate success for updates/deletes that affect no rows */ if(!sql_success(result) && !(result == SQL_NO_DATA && !strcmp((char *)diagnos.sqlState, INFO))) { - msg = encode_error_message(diagnos.error_msg); + msg = encode_error_message(diagnos.error_msg, extended_error(state, diagnos.sqlState), diagnos.nativeError); } else { for (i = 0; i < param_status.params_processed; i++) { switch (param_status.param_status_array[i]) { @@ -823,8 +831,8 @@ static db_result_msg db_param_query(byte *buffer, db_state *state) break; default: diagnos = - get_diagnos(SQL_HANDLE_STMT, statement_handle(state)); - msg = encode_error_message(diagnos.error_msg); + get_diagnos(SQL_HANDLE_STMT, statement_handle(state), extended_errors(state)); + msg = encode_error_message(diagnos.error_msg, extended_error(state, diagnos.sqlState), diagnos.nativeError); i = param_status.params_processed; break; } @@ -893,16 +901,16 @@ static db_result_msg db_describe_table(byte *sql, db_state *state) DO_EXIT(EXIT_ALLOC); if (!sql_success(SQLPrepare(statement_handle(state), sql, SQL_NTS))){ - diagnos = get_diagnos(SQL_HANDLE_STMT, statement_handle(state)); - msg = encode_error_message(diagnos.error_msg); + diagnos = get_diagnos(SQL_HANDLE_STMT, statement_handle(state), extended_errors(state)); + msg = encode_error_message(diagnos.error_msg, extended_error(state, diagnos.sqlState), diagnos.nativeError); clean_state(state); return msg; } if(!sql_success(SQLNumResultCols(statement_handle(state), &num_of_columns))) { - diagnos = get_diagnos(SQL_HANDLE_STMT, statement_handle(state)); - msg = encode_error_message(diagnos.error_msg); + diagnos = get_diagnos(SQL_HANDLE_STMT, statement_handle(state), extended_errors(state)); + msg = encode_error_message(diagnos.error_msg, extended_error(state, diagnos.sqlState), diagnos.nativeError); clean_state(state); return msg; } @@ -951,7 +959,7 @@ static db_result_msg encode_empty_message(void) } /* Description: Encode an error-message to send back to erlang*/ -static db_result_msg encode_error_message(char *reason) +static db_result_msg encode_error_message(char *reason, char *errCode, SQLINTEGER nativeError ) { int index; db_result_msg msg; @@ -960,6 +968,12 @@ static db_result_msg encode_error_message(char *reason) ei_encode_version(NULL, &index); ei_encode_tuple_header(NULL, &index, 2); ei_encode_atom(NULL, &index, "error"); + if (errCode) + { + ei_encode_tuple_header(NULL, &index, 3); + ei_encode_string(NULL, &index, errCode); + ei_encode_long(NULL, &index, nativeError); + } ei_encode_string(NULL, &index, reason); msg.length = index; @@ -970,6 +984,12 @@ static db_result_msg encode_error_message(char *reason) ei_encode_version((char *)msg.buffer, &index); ei_encode_tuple_header((char *)msg.buffer, &index, 2); ei_encode_atom((char *)msg.buffer, &index, "error"); + if (errCode) + { + ei_encode_tuple_header((char *)msg.buffer, &index, 3); + ei_encode_string((char *)msg.buffer, &index, errCode); + ei_encode_long((char *)msg.buffer, &index, nativeError); + } ei_encode_string((char *)msg.buffer, &index, reason); return msg; @@ -1013,8 +1033,8 @@ static db_result_msg encode_result(db_state *state) if(!sql_success(SQLNumResultCols(statement_handle(state), &num_of_columns))) { - diagnos = get_diagnos(SQL_HANDLE_STMT, statement_handle(state)); - msg = encode_error_message(diagnos.error_msg); + diagnos = get_diagnos(SQL_HANDLE_STMT, statement_handle(state), extended_errors(state)); + msg = encode_error_message(diagnos.error_msg, extended_error(state, diagnos.sqlState), diagnos.nativeError); clean_state(state); return msg; } @@ -1030,8 +1050,8 @@ static db_result_msg encode_result(db_state *state) } if(!sql_success(SQLRowCount(statement_handle(state), &RowCountPtr))) { - diagnos = get_diagnos(SQL_HANDLE_STMT, statement_handle(state)); - msg = encode_error_message(diagnos.error_msg); + diagnos = get_diagnos(SQL_HANDLE_STMT, statement_handle(state), extended_errors(state)); + msg = encode_error_message(diagnos.error_msg, extended_error(state, diagnos.sqlState), diagnos.nativeError); clean_state(state); return msg; } @@ -1239,7 +1259,7 @@ static db_result_msg encode_column_name_list(SQLSMALLINT num_of_columns, (columns(state)[i]).type.sql = sql_type; (columns(state)[i]).type.col_size = size; - msg = map_sql_2_c_column(&columns(state)[i]); + msg = map_sql_2_c_column(&columns(state)[i], state); if (msg.length > 0) { return msg; /* An error has occurred */ } else { @@ -2346,7 +2366,7 @@ static void map_dec_num_2_c_column(col_type *type, int precision, int scale) /* Description: Transform SQL columntype to C columntype. Returns a dummy db_result_msg with length 0 on success and an errormessage otherwise.*/ -static db_result_msg map_sql_2_c_column(db_column* column) +static db_result_msg map_sql_2_c_column(db_column* column, db_state *state) { db_result_msg msg; @@ -2415,10 +2435,10 @@ static db_result_msg map_sql_2_c_column(db_column* column) column -> type.strlen_or_indptr = (SQLLEN)NULL; break; case SQL_UNKNOWN_TYPE: - msg = encode_error_message("Unknown column type"); + msg = encode_error_message("Unknown column type", extended_error(state, ""), 0); break; default: - msg = encode_error_message("Column type not supported"); + msg = encode_error_message("Column type not supported", extended_error(state, ""), 0); break; } return msg; @@ -2527,7 +2547,7 @@ static db_column retrive_binary_data(db_column column, int column_nr, while (result == SQL_SUCCESS_WITH_INFO) { - diagnos = get_diagnos(SQL_HANDLE_STMT, statement_handle(state)); + diagnos = get_diagnos(SQL_HANDLE_STMT, statement_handle(state), extended_errors(state)); if(strcmp((char *)diagnos.sqlState, TRUNCATED) == 0) { outputlen = column.type.len - 1; @@ -2614,10 +2634,10 @@ static db_result_msg more_result_sets(db_state *state) /* As we found an error we do not care about any potential more result sets */ exists_more_result_sets(state) = FALSE; - diagnos = get_diagnos(SQL_HANDLE_STMT, statement_handle(state)); + diagnos = get_diagnos(SQL_HANDLE_STMT, statement_handle(state), extended_errors(state)); strcat((char *)diagnos.error_msg, "Failed to create on of the result sets"); - msg = encode_error_message(diagnos.error_msg); + msg = encode_error_message(diagnos.error_msg, extended_error(state, diagnos.sqlState), diagnos.nativeError); return msg; } } @@ -2634,7 +2654,7 @@ static Boolean sql_success(SQLRETURN result) diagnostic records scaning for error messages and the sqlstate. If this function is called when no error has ocurred only the sqlState field may be referenced.*/ -static diagnos get_diagnos(SQLSMALLINT handleType, SQLHANDLE handle) +static diagnos get_diagnos(SQLSMALLINT handleType, SQLHANDLE handle, Boolean extendedErrors) { diagnos diagnos; SQLINTEGER nativeError; @@ -2658,17 +2678,16 @@ static diagnos get_diagnos(SQLSMALLINT handleType, SQLHANDLE handle) result = SQLGetDiagRec(handleType, handle, record_nr, current_sql_state, &nativeError, current_errmsg_pos, (SQLSMALLINT)errmsg_buffer_size, &errmsg_size); - if(result != SQL_SUCCESS && result != SQL_NO_DATA) { - - - break; - } else { + if(result == SQL_SUCCESS) { /* update the sqlstate in the diagnos record, because the SQLGetDiagRec call succeeded */ memcpy(diagnos.sqlState, current_sql_state, SQL_STATE_SIZE); + diagnos.nativeError = nativeError; errmsg_buffer_size = errmsg_buffer_size - errmsg_size; acc_errmsg_size = acc_errmsg_size + errmsg_size; current_errmsg_pos = current_errmsg_pos + errmsg_size; + } else { + break; } } @@ -2676,7 +2695,7 @@ static diagnos get_diagnos(SQLSMALLINT handleType, SQLHANDLE handle) strcat((char *)diagnos.error_msg, "No SQL-driver information available."); } - else { + else if (!extendedErrors){ strcat(strcat((char *)diagnos.error_msg, " SQLSTATE IS: "), (char *)diagnos.sqlState); } diff --git a/lib/odbc/c_src/odbcserver.h b/lib/odbc/c_src/odbcserver.h index a76cedf1af..71760189e7 100644 --- a/lib/odbc/c_src/odbcserver.h +++ b/lib/odbc/c_src/odbcserver.h @@ -145,6 +145,7 @@ typedef struct { typedef struct { SQLCHAR sqlState[SQL_STATE_SIZE]; + SQLINTEGER nativeError; byte error_msg[MAX_ERR_MSG]; } diagnos; @@ -179,6 +180,7 @@ typedef struct { Boolean exists_more_result_sets; Boolean param_query; Boolean out_params; + Boolean extended_errors; } db_state; typedef enum { @@ -198,3 +200,5 @@ typedef enum { #define exists_more_result_sets(db_state) (db_state -> exists_more_result_sets) #define param_query(db_state) (db_state -> param_query) #define out_params(db_state) (db_state -> out_params) +#define extended_errors(db_state) (db_state -> extended_errors) +#define extended_error(db_state, errorcode) ( extended_errors(state) ? errorcode : NULL ) diff --git a/lib/odbc/doc/src/notes.xml b/lib/odbc/doc/src/notes.xml index 5f6cf91961..7ba0307a45 100644 --- a/lib/odbc/doc/src/notes.xml +++ b/lib/odbc/doc/src/notes.xml @@ -4,7 +4,7 @@ <chapter> <header> <copyright> - <year>2004</year><year>2011</year> + <year>2004</year><year>2012</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> diff --git a/lib/odbc/doc/src/odbc.xml b/lib/odbc/doc/src/odbc.xml index 8a58dc2848..0e3386b11f 100644 --- a/lib/odbc/doc/src/odbc.xml +++ b/lib/odbc/doc/src/odbc.xml @@ -74,8 +74,12 @@ <code type="none"> milliseconds() = integer() >= 0 </code> <code type="none"> - common_reason() = connection_closed | term() - some kind of - explanation of what went wrong </code> + common_reason() = connection_closed | extended_error() | term() - some kind of + explanation of what went wrong </code> + <code type="none"> + extended_error() = {string(), integer(), Reason} - extended error type with ODBC + and native database error codes, as well as the base reason that would have been + returned had extended_errors not been enabled. </code> <code type="none"> string() = list of ASCII characters </code> <code type="none"> @@ -143,7 +147,7 @@ <d>All options has default values. </d> <v>option() = {auto_commit, on | off} | {timeout, milliseconds()} | {binary_strings, on | off} | {tuple_row, on | off} | {scrollable_cursors, on | off} | - {trace_driver, on | off} </v> + {trace_driver, on | off} | {extended_errors, on | off} </v> <v>Ref = connection_reference() - should be used to access the connection. </v> <v>Reason = port_program_executable_not_found | common_reason()</v> </type> @@ -196,6 +200,19 @@ <p>For more information about the <c>ConnectStr</c> see description of the function SQLDriverConnect in [1].</p> </note> + + <p>The <c>extended_errors</c> option enables extended ODBC error + information when an operation fails. Rather than returning <c>{error, Reason}</c>, + the failing function will reutrn <c>{error, {ODBCErrorCode, NativeErrorCode, Reason}}</c>. + Note that this information is probably of little use when writing database-independent code, + but can be of assistance in providing more sophisticated error handling when dealing with + a known underlying database. + <list type="bulleted"> + <item><c>ODBCErrorCode</c> is the ODBC error string returned by the ODBC driver.</item> + <item><c>NativeErrorCode</c> is the numberic error code returned by the underlying database. The possible values + and their meanings are dependent on the database being used.</item> + <item><c>Reason</c> is as per the <c>Reason</c> field when extended errors are not enabled.</item> + </list></p> </desc> </func> <func> @@ -203,7 +220,7 @@ <fsummary>Closes a connection to a database. </fsummary> <type> <v>Ref = connection_reference()</v> - <v>Reason = process_not_owner_of_odbc_connection</v> + <v>Reason = process_not_owner_of_odbc_connection | extended_error()</v> </type> <desc> <p>Closes a connection to a database. This will also diff --git a/lib/odbc/src/odbc.erl b/lib/odbc/src/odbc.erl index 16fdb4aabd..3eabec9ec3 100644 --- a/lib/odbc/src/odbc.erl +++ b/lib/odbc/src/odbc.erl @@ -810,10 +810,11 @@ connect(ConnectionReferense, ConnectionStr, Options) -> {C_TupleRow, _} = connection_config(tuple_row, Options), {BinaryStrings, _} = connection_config(binary_strings, Options), + {ExtendedErrors, _} = connection_config(extended_errors, Options), ODBCCmd = [?OPEN_CONNECTION, C_AutoCommitMode, C_TraceDriver, - C_SrollableCursors, C_TupleRow, BinaryStrings, ConnectionStr], + C_SrollableCursors, C_TupleRow, BinaryStrings, ExtendedErrors, ConnectionStr], %% Send request, to open a database connection, to the control process. case call(ConnectionReferense, @@ -860,6 +861,8 @@ connection_default(trace_driver) -> connection_default(scrollable_cursors) -> {?ON, on}; connection_default(binary_strings) -> + {?OFF, off}; +connection_default(extended_errors) -> {?OFF, off}. %%------------------------------------------------------------------------- diff --git a/lib/odbc/test/odbc_connect_SUITE.erl b/lib/odbc/test/odbc_connect_SUITE.erl index a076c4dfff..7d732f20f7 100644 --- a/lib/odbc/test/odbc_connect_SUITE.erl +++ b/lib/odbc/test/odbc_connect_SUITE.erl @@ -51,7 +51,7 @@ all() -> {group, client_dies}, connect_timeout, timeout, many_timeouts, timeout_reset, disconnect_on_timeout, connection_closed, disable_scrollable_cursors, - return_rows_as_lists, api_missuse]; + return_rows_as_lists, api_missuse, extended_errors]; Other -> {skip, Other} end. @@ -838,3 +838,33 @@ transaction_support_str(mysql) -> "ENGINE = InnoDB"; transaction_support_str(_) -> "". + + +%%------------------------------------------------------------------------- +extended_errors(doc)-> + ["Test the extended errors connection option: When off; the old behaviour of just an error " + "string is returned on error. When on, the error string is replaced by a 3 element tuple " + "that also exposes underlying ODBC provider error codes."]; +extended_errors(suite) -> []; +extended_errors(Config) when is_list(Config)-> + Table = ?config(tableName, Config), + {ok, Ref} = odbc:connect(?RDBMS:connection_string(), odbc_test_lib:platform_options()), + {updated, _} = odbc:sql_query(Ref, "create table " ++ Table ++" ( id integer, data varchar(10))"), + + % Error case WITHOUT extended errors on... + case odbc:sql_query(Ref, "create table " ++ Table ++" ( id integer, data varchar(10))") of + {error, ErrorString} when is_list(ErrorString) -> ok + end, + + % Now the test case with extended errors on - This should return a tuple, not a list/string now. + % The first element is a string that is the ODBC error string; the 2nd element is a native integer error + % code passed from the underlying provider driver. The last is the familiar old error string. + % We can't check the actual error code; as each different underlying provider will return + % a different value - So we just check the return types at least. + {ok, RefExtended} = odbc:connect(?RDBMS:connection_string(), odbc_test_lib:platform_options() ++ [{extended_errors, on}]), + case odbc:sql_query(RefExtended, "create table " ++ Table ++" ( id integer, data varchar(10))") of + {error, {ODBCCodeString, NativeCodeNum, ShortErrorString}} when is_list(ODBCCodeString), is_number(NativeCodeNum), is_list(ShortErrorString) -> ok + end, + + ok = odbc:disconnect(Ref), + ok = odbc:disconnect(RefExtended). diff --git a/lib/odbc/vsn.mk b/lib/odbc/vsn.mk index 3bb2fe5bce..585b92b2d2 100644 --- a/lib/odbc/vsn.mk +++ b/lib/odbc/vsn.mk @@ -1 +1 @@ -ODBC_VSN = 2.10.13 +ODBC_VSN = 2.10.14 diff --git a/lib/orber/src/Makefile b/lib/orber/src/Makefile index 72610def2b..6eb659407d 100644 --- a/lib/orber/src/Makefile +++ b/lib/orber/src/Makefile @@ -200,8 +200,7 @@ ERL_COMPILE_FLAGS += $(ERL_IDL_FLAGS) \ +'{attribute,insert,app_vsn,"orber_$(ORBER_VSN)"}' \ -D'ORBVSN="$(ORBER_VSN)"' -ASN_FLAGS = -bber_bin +der +compact_bit_string +optimize \ - +nowarn_unused_record +ASN_FLAGS = -bber +der +compact_bit_string +nowarn_unused_record # ---------------------------------------------------- # Targets diff --git a/lib/percept/doc/src/notes.xml b/lib/percept/doc/src/notes.xml index 1ac1a5ab62..dd70cfe994 100644 --- a/lib/percept/doc/src/notes.xml +++ b/lib/percept/doc/src/notes.xml @@ -32,6 +32,21 @@ </header> <p>This document describes the changes made to the Percept application.</p> +<section><title>Percept 0.8.7</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + Add missing modules in app-file</p> + <p> + Own Id: OTP-10439</p> + </item> + </list> + </section> + +</section> + <section><title>Percept 0.8.6.1</title> <section><title>Improvements and New Features</title> diff --git a/lib/percept/src/percept.app.src b/lib/percept/src/percept.app.src index 7b20093ece..cf4a9fc438 100644 --- a/lib/percept/src/percept.app.src +++ b/lib/percept/src/percept.app.src @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2007-2009. All Rights Reserved. +%% Copyright Ericsson AB 2007-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in diff --git a/lib/percept/vsn.mk b/lib/percept/vsn.mk index 9267a41055..f868246f7b 100644 --- a/lib/percept/vsn.mk +++ b/lib/percept/vsn.mk @@ -1 +1 @@ -PERCEPT_VSN = 0.8.6.1 +PERCEPT_VSN = 0.8.7 diff --git a/lib/public_key/asn1/AuthenticationFramework.asn1 b/lib/public_key/asn1/AuthenticationFramework.asn1 new file mode 100644 index 0000000000..3754486473 --- /dev/null +++ b/lib/public_key/asn1/AuthenticationFramework.asn1 @@ -0,0 +1,367 @@ +AuthenticationFramework {joint-iso-itu-t ds(5) module(1) + authenticationFramework(7) 6} DEFINITIONS ::= +BEGIN + +-- EXPORTS All +-- The types and values defined in this module are exported for use in the other ASN.1 modules contained +-- within the Directory Specifications, and for the use of other applications which will use them to access +-- Directory services. Other applications may use them for their own purposes, but this will not constrain +-- extensions and modifications needed to maintain or improve the Directory service. +IMPORTS + id-at, id-nf, id-oc, informationFramework, selectedAttributeTypes, + basicAccessControl, certificateExtensions + FROM UsefulDefinitions {joint-iso-itu-t ds(5) module(1) + usefulDefinitions(0) 6} + Name, ATTRIBUTE, OBJECT-CLASS, NAME-FORM, top + FROM InformationFramework informationFramework + UniqueIdentifier, octetStringMatch, commonName, UnboundedDirectoryString + FROM SelectedAttributeTypes selectedAttributeTypes + certificateExactMatch, certificatePairExactMatch, certificateListExactMatch, + KeyUsage, GeneralNames, CertificatePoliciesSyntax, + algorithmIdentifierMatch, CertPolicyId + FROM CertificateExtensions certificateExtensions; + +-- parameterized types +ENCRYPTED{ToBeEnciphered} ::= + BIT STRING + (CONSTRAINED BY { + -- shall be the result of applying an encipherment procedure + -- to the BER-encoded octets of a value of --ToBeEnciphered}) + +HASH{ToBeHashed} ::= SEQUENCE { + algorithmIdentifier AlgorithmIdentifier{{SupportedAlgorithms}}, + hashValue + BIT STRING + (CONSTRAINED BY { + -- shall be the result of applying a hashing procedure to the DER-encoded octets + -- of a value of -- ToBeHashed}) +} + +ENCRYPTED-HASH{ToBeSigned} ::= + BIT STRING + (CONSTRAINED BY { + -- shall be the result of applying a hashing procedure to the DER-encoded (see 6.1) octets + -- of a value of --ToBeSigned -- and then applying an encipherment procedure to those octets --}) + +SIGNATURE{ToBeSigned} ::= SEQUENCE { + algorithmIdentifier AlgorithmIdentifier{{SupportedAlgorithms}}, + encrypted ENCRYPTED-HASH{ToBeSigned} +} + +SIGNED{ToBeSigned} ::= SEQUENCE { + toBeSigned ToBeSigned, + COMPONENTS OF SIGNATURE{ToBeSigned} +} + +-- public-key certificate definition +Certificate ::= SIGNED{CertificateContent} + +CertificateContent ::= SEQUENCE { + version [0] Version DEFAULT v1, + serialNumber CertificateSerialNumber, + signature AlgorithmIdentifier{{SupportedAlgorithms}}, + issuer Name, + validity Validity, + subject Name, + subjectPublicKeyInfo SubjectPublicKeyInfo, + issuerUniqueIdentifier [1] IMPLICIT UniqueIdentifier OPTIONAL, + -- if present, version shall be v2 or v3 + subjectUniqueIdentifier [2] IMPLICIT UniqueIdentifier OPTIONAL, + -- if present, version shall be v2 or v3 + extensions [3] Extensions OPTIONAL + -- If present, version shall be v3 +} + +Version ::= INTEGER {v1(0), v2(1), v3(2)} + +CertificateSerialNumber ::= INTEGER + +AlgorithmIdentifier{ALGORITHM:SupportedAlgorithms} ::= SEQUENCE { + algorithm ALGORITHM.&id({SupportedAlgorithms}), + parameters ALGORITHM.&Type({SupportedAlgorithms}{@algorithm}) OPTIONAL +} + +-- Definition of the following information object set is deferred, perhaps to standardized +-- profiles or to protocol implementation conformance statements. The set is required to +-- specify a table constraint on the parameters component of AlgorithmIdentifier. +SupportedAlgorithms ALGORITHM ::= + {...} + +Validity ::= SEQUENCE {notBefore Time, + notAfter Time +} + +SubjectPublicKeyInfo ::= SEQUENCE { + algorithm AlgorithmIdentifier{{SupportedAlgorithms}}, + subjectPublicKey BIT STRING +} + +Time ::= CHOICE {utcTime UTCTime, + generalizedTime GeneralizedTime +} + +Extensions ::= SEQUENCE OF Extension + +-- For those extensions where ordering of individual extensions within the SEQUENCE is significant, the +-- specification of those individual extensions shall include the rules for the significance of the order therein +Extension ::= SEQUENCE { + extnId EXTENSION.&id({ExtensionSet}), + critical BOOLEAN DEFAULT FALSE, + extnValue + OCTET STRING + (CONTAINING EXTENSION.&ExtnType({ExtensionSet}{@extnId}) + ENCODED BY + der) +} + +der OBJECT IDENTIFIER ::= + {joint-iso-itu-t asn1(1) ber-derived(2) distinguished-encoding(1)} + +ExtensionSet EXTENSION ::= + {...} + +EXTENSION ::= CLASS {&id OBJECT IDENTIFIER UNIQUE, + &ExtnType +}WITH SYNTAX {SYNTAX &ExtnType + IDENTIFIED BY &id +} + +ALGORITHM ::= CLASS {&Type OPTIONAL, + &id OBJECT IDENTIFIER UNIQUE +}WITH SYNTAX {[&Type] + IDENTIFIED BY &id +} + +-- other PKI certificate constructs +Certificates ::= SEQUENCE { + userCertificate Certificate, + certificationPath ForwardCertificationPath OPTIONAL +} + +CertificationPath ::= SEQUENCE { + userCertificate Certificate, + theCACertificates SEQUENCE OF CertificatePair OPTIONAL +} + +ForwardCertificationPath ::= SEQUENCE OF CrossCertificates + +CrossCertificates ::= SET OF Certificate + +PkiPath ::= SEQUENCE OF Certificate + +-- certificate revocation list (CRL) +CertificateList ::= + SIGNED{CertificateListContent} + +CertificateListContent ::= SEQUENCE { + version Version OPTIONAL, + -- if present, version shall be v2 + signature AlgorithmIdentifier{{SupportedAlgorithms}}, + issuer Name, + thisUpdate Time, + nextUpdate Time OPTIONAL, + revokedCertificates + SEQUENCE OF + SEQUENCE {serialNumber CertificateSerialNumber, + revocationDate Time, + crlEntryExtensions Extensions OPTIONAL} OPTIONAL, + crlExtensions [0] Extensions OPTIONAL +} + +-- PKI object classes +pkiUser OBJECT-CLASS ::= { + SUBCLASS OF {top} + KIND auxiliary + MAY CONTAIN {userCertificate} + ID id-oc-pkiUser +} + +pkiCA OBJECT-CLASS ::= { + SUBCLASS OF {top} + KIND auxiliary + MAY CONTAIN + {cACertificate | certificateRevocationList | authorityRevocationList | + crossCertificatePair} + ID id-oc-pkiCA +} + +cRLDistributionPoint OBJECT-CLASS ::= { + SUBCLASS OF {top} + KIND structural + MUST CONTAIN {commonName} + MAY CONTAIN + {certificateRevocationList | authorityRevocationList | deltaRevocationList} + ID id-oc-cRLDistributionPoint +} + +cRLDistPtNameForm NAME-FORM ::= { + NAMES cRLDistributionPoint + WITH ATTRIBUTES {commonName} + ID id-nf-cRLDistPtNameForm +} + +deltaCRL OBJECT-CLASS ::= { + SUBCLASS OF {top} + KIND auxiliary + MAY CONTAIN {deltaRevocationList} + ID id-oc-deltaCRL +} + +cpCps OBJECT-CLASS ::= { + SUBCLASS OF {top} + KIND auxiliary + MAY CONTAIN {certificatePolicy | certificationPracticeStmt} + ID id-oc-cpCps +} + +pkiCertPath OBJECT-CLASS ::= { + SUBCLASS OF {top} + KIND auxiliary + MAY CONTAIN {pkiPath} + ID id-oc-pkiCertPath +} + +-- PKI directory attributes +userCertificate ATTRIBUTE ::= { + WITH SYNTAX Certificate + EQUALITY MATCHING RULE certificateExactMatch + ID id-at-userCertificate +} + +cACertificate ATTRIBUTE ::= { + WITH SYNTAX Certificate + EQUALITY MATCHING RULE certificateExactMatch + ID id-at-cAcertificate +} + +crossCertificatePair ATTRIBUTE ::= { + WITH SYNTAX CertificatePair + EQUALITY MATCHING RULE certificatePairExactMatch + ID id-at-crossCertificatePair +} + +CertificatePair ::= SEQUENCE { + forward [0] Certificate OPTIONAL, + reverse [1] Certificate OPTIONAL + -- at least one of the pair shall be present +} +(WITH COMPONENTS { + ..., + forward PRESENT + } | WITH COMPONENTS { + ..., + reverse PRESENT + }) + +certificateRevocationList ATTRIBUTE ::= { + WITH SYNTAX CertificateList + EQUALITY MATCHING RULE certificateListExactMatch + ID id-at-certificateRevocationList +} + +authorityRevocationList ATTRIBUTE ::= { + WITH SYNTAX CertificateList + EQUALITY MATCHING RULE certificateListExactMatch + ID id-at-authorityRevocationList +} + +deltaRevocationList ATTRIBUTE ::= { + WITH SYNTAX CertificateList + EQUALITY MATCHING RULE certificateListExactMatch + ID id-at-deltaRevocationList +} + +supportedAlgorithms ATTRIBUTE ::= { + WITH SYNTAX SupportedAlgorithm + EQUALITY MATCHING RULE algorithmIdentifierMatch + ID id-at-supportedAlgorithms +} + +SupportedAlgorithm ::= SEQUENCE { + algorithmIdentifier AlgorithmIdentifier{{SupportedAlgorithms}}, + intendedUsage [0] KeyUsage OPTIONAL, + intendedCertificatePolicies [1] CertificatePoliciesSyntax OPTIONAL +} + +certificationPracticeStmt ATTRIBUTE ::= { + WITH SYNTAX InfoSyntax + ID id-at-certificationPracticeStmt +} + +InfoSyntax ::= CHOICE { + content UnboundedDirectoryString, + pointer SEQUENCE {name GeneralNames, + hash HASH{HashedPolicyInfo} OPTIONAL} +} + +POLICY ::= TYPE-IDENTIFIER + +HashedPolicyInfo ::= POLICY.&Type({Policies}) + +Policies POLICY ::= + {...} -- Defined by implementors + +certificatePolicy ATTRIBUTE ::= { + WITH SYNTAX PolicySyntax + ID id-at-certificatePolicy +} + +PolicySyntax ::= SEQUENCE { + policyIdentifier PolicyID, + policySyntax InfoSyntax +} + +PolicyID ::= CertPolicyId + +pkiPath ATTRIBUTE ::= {WITH SYNTAX PkiPath + ID id-at-pkiPath +} + +userPassword ATTRIBUTE ::= { + WITH SYNTAX OCTET STRING(SIZE (0..MAX)) + EQUALITY MATCHING RULE octetStringMatch + ID id-at-userPassword +} + +-- object identifier assignments +-- object classes +id-oc-cRLDistributionPoint OBJECT IDENTIFIER ::= + {id-oc 19} + +id-oc-pkiUser OBJECT IDENTIFIER ::= {id-oc 21} + +id-oc-pkiCA OBJECT IDENTIFIER ::= {id-oc 22} + +id-oc-deltaCRL OBJECT IDENTIFIER ::= {id-oc 23} + +id-oc-cpCps OBJECT IDENTIFIER ::= {id-oc 30} + +id-oc-pkiCertPath OBJECT IDENTIFIER ::= {id-oc 31} + +-- name forms +id-nf-cRLDistPtNameForm OBJECT IDENTIFIER ::= {id-nf 14} + +-- directory attributes +id-at-userPassword OBJECT IDENTIFIER ::= {id-at 35} + +id-at-userCertificate OBJECT IDENTIFIER ::= {id-at 36} + +id-at-cAcertificate OBJECT IDENTIFIER ::= {id-at 37} + +id-at-authorityRevocationList OBJECT IDENTIFIER ::= {id-at 38} + +id-at-certificateRevocationList OBJECT IDENTIFIER ::= {id-at 39} + +id-at-crossCertificatePair OBJECT IDENTIFIER ::= {id-at 40} + +id-at-supportedAlgorithms OBJECT IDENTIFIER ::= {id-at 52} + +id-at-deltaRevocationList OBJECT IDENTIFIER ::= {id-at 53} + +id-at-certificationPracticeStmt OBJECT IDENTIFIER ::= {id-at 68} + +id-at-certificatePolicy OBJECT IDENTIFIER ::= {id-at 69} + +id-at-pkiPath OBJECT IDENTIFIER ::= {id-at 70} + +END -- AuthenticationFramework diff --git a/lib/public_key/asn1/InformationFramework.asn1 b/lib/public_key/asn1/InformationFramework.asn1 new file mode 100644 index 0000000000..4aed43a39e --- /dev/null +++ b/lib/public_key/asn1/InformationFramework.asn1 @@ -0,0 +1,682 @@ +InformationFramework {joint-iso-itu-t ds(5) module(1) informationFramework(1) + 6} DEFINITIONS ::= +BEGIN + +-- EXPORTS All +-- The types and values defined in this module are exported for use in the other ASN.1 modules contained +-- within the Directory Specifications, and for the use of other applications which will use them to access +-- Directory services. Other applications may use them for their own purposes, but this will not constrain +-- extensions and modifications needed to maintain or improve the Directory service. +IMPORTS + -- from ITU-T Rec. X.501 | ISO/IEC 9594-2 + directoryAbstractService, id-ar, id-at, id-mr, id-nf, id-oa, id-oc, + id-sc, selectedAttributeTypes, serviceAdministration + FROM UsefulDefinitions {joint-iso-itu-t ds(5) module(1) + usefulDefinitions(0) 6} + SearchRule + FROM ServiceAdministration serviceAdministration + -- from ITU-T Rec. X.511 | ISO/IEC 9594-3 + TypeAndContextAssertion + FROM DirectoryAbstractService directoryAbstractService + -- from ITU-T Rec. X.520 | ISO/IEC 9594-6 + booleanMatch, commonName, generalizedTimeMatch, generalizedTimeOrderingMatch, + integerFirstComponentMatch, integerMatch, integerOrderingMatch, + objectIdentifierFirstComponentMatch, UnboundedDirectoryString + FROM SelectedAttributeTypes selectedAttributeTypes; + +-- attribute data types +Attribute{ATTRIBUTE:SupportedAttributes} ::= SEQUENCE { + type ATTRIBUTE.&id({SupportedAttributes}), + values + SET SIZE (0..MAX) OF ATTRIBUTE.&Type({SupportedAttributes}{@type}), + valuesWithContext + SET SIZE (1..MAX) OF + SEQUENCE {value ATTRIBUTE.&Type({SupportedAttributes}{@type}), + contextList SET SIZE (1..MAX) OF Context} OPTIONAL +} + +AttributeType ::= ATTRIBUTE.&id + +AttributeValue ::= ATTRIBUTE.&Type + +Context ::= SEQUENCE { + contextType CONTEXT.&id({SupportedContexts}), + contextValues + SET SIZE (1..MAX) OF CONTEXT.&Type({SupportedContexts}{@contextType}), + fallback BOOLEAN DEFAULT FALSE +} + +AttributeValueAssertion ::= SEQUENCE { + type ATTRIBUTE.&id({SupportedAttributes}), + assertion + ATTRIBUTE.&equality-match.&AssertionType + ({SupportedAttributes}{@type}), + assertedContexts + CHOICE {allContexts [0] NULL, + selectedContexts [1] SET SIZE (1..MAX) OF ContextAssertion + } OPTIONAL +} + +ContextAssertion ::= SEQUENCE { + contextType CONTEXT.&id({SupportedContexts}), + contextValues + SET SIZE (1..MAX) OF + CONTEXT.&Assertion({SupportedContexts}{@contextType}) +} + +AttributeTypeAssertion ::= SEQUENCE { + type ATTRIBUTE.&id({SupportedAttributes}), + assertedContexts SEQUENCE SIZE (1..MAX) OF ContextAssertion OPTIONAL +} + +-- Definition of the following information object set is deferred, perhaps to standardized +-- profiles or to protocol implementation conformance statements. The set is required to +-- specify a table constraint on the values component of Attribute, the value component +-- of AttributeTypeAndValue, and the assertion component of AttributeValueAssertion. +SupportedAttributes ATTRIBUTE ::= + {objectClass | aliasedEntryName, ...} + +-- Definition of the following information object set is deferred, perhaps to standardized +-- profiles or to protocol implementation conformance statements. The set is required to +-- specify a table constraint on the context specifications +SupportedContexts CONTEXT ::= + {...} + +-- naming data types +Name ::= CHOICE { -- only one possibility for now --rdnSequence RDNSequence +} + +RDNSequence ::= SEQUENCE OF RelativeDistinguishedName + +DistinguishedName ::= RDNSequence + +RelativeDistinguishedName ::= + SET SIZE (1..MAX) OF AttributeTypeAndDistinguishedValue + +AttributeTypeAndDistinguishedValue ::= SEQUENCE { + type ATTRIBUTE.&id({SupportedAttributes}), + value ATTRIBUTE.&Type({SupportedAttributes}{@type}), + primaryDistinguished BOOLEAN DEFAULT TRUE, + valuesWithContext + SET SIZE (1..MAX) OF + SEQUENCE {distingAttrValue + [0] ATTRIBUTE.&Type({SupportedAttributes}{@type}) + OPTIONAL, + contextList SET SIZE (1..MAX) OF Context} OPTIONAL +} + +-- subtree data types +SubtreeSpecification ::= SEQUENCE { + base [0] LocalName DEFAULT {}, + COMPONENTS OF ChopSpecification, + specificationFilter [4] Refinement OPTIONAL +} + +-- empty sequence specifies whole administrative area +LocalName ::= RDNSequence + +ChopSpecification ::= SEQUENCE { + specificExclusions + [1] SET SIZE (1..MAX) OF + CHOICE {chopBefore [0] LocalName, + chopAfter [1] LocalName} OPTIONAL, + minimum [2] BaseDistance DEFAULT 0, + maximum [3] BaseDistance OPTIONAL +} + +BaseDistance ::= INTEGER(0..MAX) + +Refinement ::= CHOICE { + item [0] OBJECT-CLASS.&id, + and [1] SET SIZE (1..MAX) OF Refinement, + or [2] SET SIZE (1..MAX) OF Refinement, + not [3] Refinement +} + +-- OBJECT-CLASS information object class specification +OBJECT-CLASS ::= CLASS { + &Superclasses OBJECT-CLASS OPTIONAL, + &kind ObjectClassKind DEFAULT structural, + &MandatoryAttributes ATTRIBUTE OPTIONAL, + &OptionalAttributes ATTRIBUTE OPTIONAL, + &id OBJECT IDENTIFIER UNIQUE +} +WITH SYNTAX { + [SUBCLASS OF &Superclasses] + [KIND &kind] + [MUST CONTAIN &MandatoryAttributes] + [MAY CONTAIN &OptionalAttributes] + ID &id +} + +ObjectClassKind ::= ENUMERATED {abstract(0), structural(1), auxiliary(2)} + +-- object classes +top OBJECT-CLASS ::= { + KIND abstract + MUST CONTAIN {objectClass} + ID id-oc-top +} + +alias OBJECT-CLASS ::= { + SUBCLASS OF {top} + MUST CONTAIN {aliasedEntryName} + ID id-oc-alias +} + +parent OBJECT-CLASS ::= {KIND abstract + ID id-oc-parent +} + +child OBJECT-CLASS ::= {KIND auxiliary + ID id-oc-child +} + +-- ATTRIBUTE information object class specification +ATTRIBUTE ::= CLASS { + &derivation ATTRIBUTE OPTIONAL, + &Type OPTIONAL, -- either &Type or &derivation required + &equality-match MATCHING-RULE OPTIONAL, + &ordering-match MATCHING-RULE OPTIONAL, + &substrings-match MATCHING-RULE OPTIONAL, + &single-valued BOOLEAN DEFAULT FALSE, + &collective BOOLEAN DEFAULT FALSE, + &dummy BOOLEAN DEFAULT FALSE, + -- operational extensions + &no-user-modification BOOLEAN DEFAULT FALSE, + &usage AttributeUsage DEFAULT userApplications, + &id OBJECT IDENTIFIER UNIQUE +} +WITH SYNTAX { + [SUBTYPE OF &derivation] + [WITH SYNTAX &Type] + [EQUALITY MATCHING RULE &equality-match] + [ORDERING MATCHING RULE &ordering-match] + [SUBSTRINGS MATCHING RULE &substrings-match] + [SINGLE VALUE &single-valued] + [COLLECTIVE &collective] + [DUMMY &dummy] + [NO USER MODIFICATION &no-user-modification] + [USAGE &usage] + ID &id +} + +AttributeUsage ::= ENUMERATED { + userApplications(0), directoryOperation(1), distributedOperation(2), + dSAOperation(3)} + +-- attributes +objectClass ATTRIBUTE ::= { + WITH SYNTAX OBJECT IDENTIFIER + EQUALITY MATCHING RULE objectIdentifierMatch + ID id-at-objectClass +} + +aliasedEntryName ATTRIBUTE ::= { + WITH SYNTAX DistinguishedName + EQUALITY MATCHING RULE distinguishedNameMatch + SINGLE VALUE TRUE + ID id-at-aliasedEntryName +} + +-- MATCHING-RULE information object class specification +MATCHING-RULE ::= CLASS { + &ParentMatchingRules MATCHING-RULE OPTIONAL, + &AssertionType OPTIONAL, + &uniqueMatchIndicator ATTRIBUTE OPTIONAL, + &id OBJECT IDENTIFIER UNIQUE +} +WITH SYNTAX { + [PARENT &ParentMatchingRules] + [SYNTAX &AssertionType] + [UNIQUE-MATCH-INDICATOR &uniqueMatchIndicator] + ID &id +} + +-- matching rules +objectIdentifierMatch MATCHING-RULE ::= { + SYNTAX OBJECT IDENTIFIER + ID id-mr-objectIdentifierMatch +} + +distinguishedNameMatch MATCHING-RULE ::= { + SYNTAX DistinguishedName + ID id-mr-distinguishedNameMatch +} + +MAPPING-BASED-MATCHING{SelectedBy, BOOLEAN:combinable, MappingResult, + OBJECT IDENTIFIER:matchingRule} ::= CLASS { + &selectBy SelectedBy OPTIONAL, + &ApplicableTo ATTRIBUTE, + &subtypesIncluded BOOLEAN DEFAULT TRUE, + &combinable BOOLEAN(combinable), + &mappingResults MappingResult OPTIONAL, + &userControl BOOLEAN DEFAULT FALSE, + &exclusive BOOLEAN DEFAULT TRUE, + &matching-rule MATCHING-RULE.&id(matchingRule), + &id OBJECT IDENTIFIER UNIQUE +} +WITH SYNTAX { + [SELECT BY &selectBy] + APPLICABLE TO &ApplicableTo + [SUBTYPES INCLUDED &subtypesIncluded] + COMBINABLE &combinable + [MAPPING RESULTS &mappingResults] + [USER CONTROL &userControl] + [EXCLUSIVE &exclusive] + MATCHING RULE &matching-rule + ID &id +} + +-- NAME-FORM information object class specification +NAME-FORM ::= CLASS { + &namedObjectClass OBJECT-CLASS, + &MandatoryAttributes ATTRIBUTE, + &OptionalAttributes ATTRIBUTE OPTIONAL, + &id OBJECT IDENTIFIER UNIQUE +} +WITH SYNTAX { + NAMES &namedObjectClass + WITH ATTRIBUTES &MandatoryAttributes + [AND OPTIONALLY &OptionalAttributes] + ID &id +} + +-- STRUCTURE-RULE class and DIT structure rule data types +DITStructureRule ::= SEQUENCE { + ruleIdentifier RuleIdentifier, + -- shall be unique within the scope of the subschema + nameForm NAME-FORM.&id, + superiorStructureRules SET SIZE (1..MAX) OF RuleIdentifier OPTIONAL +} + +RuleIdentifier ::= INTEGER + +STRUCTURE-RULE ::= CLASS { + &nameForm NAME-FORM, + &SuperiorStructureRules STRUCTURE-RULE OPTIONAL, + &id RuleIdentifier +} +WITH SYNTAX { + NAME FORM &nameForm + [SUPERIOR RULES &SuperiorStructureRules] + ID &id +} + +-- DIT content rule data type and CONTENT-RULE class +DITContentRule ::= SEQUENCE { + structuralObjectClass OBJECT-CLASS.&id, + auxiliaries SET SIZE (1..MAX) OF OBJECT-CLASS.&id OPTIONAL, + mandatory [1] SET SIZE (1..MAX) OF ATTRIBUTE.&id OPTIONAL, + optional [2] SET SIZE (1..MAX) OF ATTRIBUTE.&id OPTIONAL, + precluded [3] SET SIZE (1..MAX) OF ATTRIBUTE.&id OPTIONAL +} + +CONTENT-RULE ::= CLASS { + &structuralClass OBJECT-CLASS.&id UNIQUE, + &Auxiliaries OBJECT-CLASS OPTIONAL, + &Mandatory ATTRIBUTE OPTIONAL, + &Optional ATTRIBUTE OPTIONAL, + &Precluded ATTRIBUTE OPTIONAL +} +WITH SYNTAX { + STRUCTURAL OBJECT-CLASS &structuralClass + [AUXILIARY OBJECT-CLASSES &Auxiliaries] + [MUST CONTAIN &Mandatory] + [MAY CONTAIN &Optional] + [MUST-NOT CONTAIN &Precluded] +} + +CONTEXT ::= CLASS { + &Type , + &DefaultValue OPTIONAL, + &Assertion OPTIONAL, + &absentMatch BOOLEAN DEFAULT TRUE, + &id OBJECT IDENTIFIER UNIQUE +} +WITH SYNTAX { + WITH SYNTAX &Type + [DEFAULT-VALUE &DefaultValue] + [ASSERTED AS &Assertion] + [ABSENT-MATCH &absentMatch] + ID &id +} + +DITContextUse ::= SEQUENCE { + attributeType ATTRIBUTE.&id, + mandatoryContexts [1] SET SIZE (1..MAX) OF CONTEXT.&id OPTIONAL, + optionalContexts [2] SET SIZE (1..MAX) OF CONTEXT.&id OPTIONAL +} + +DIT-CONTEXT-USE-RULE ::= CLASS { + &attributeType ATTRIBUTE.&id UNIQUE, + &Mandatory CONTEXT OPTIONAL, + &Optional CONTEXT OPTIONAL +} +WITH SYNTAX { + ATTRIBUTE TYPE &attributeType + [MANDATORY CONTEXTS &Mandatory] + [OPTIONAL CONTEXTS &Optional] +} + +FRIENDS ::= CLASS { + &anchor ATTRIBUTE.&id UNIQUE, + &Friends ATTRIBUTE +}WITH SYNTAX {ANCHOR &anchor + FRIENDS &Friends +} + +-- system schema information objects +-- object classes +subentry OBJECT-CLASS ::= { + SUBCLASS OF {top} + KIND structural + MUST CONTAIN {commonName | subtreeSpecification} + ID id-sc-subentry +} + +subentryNameForm NAME-FORM ::= { + NAMES subentry + WITH ATTRIBUTES {commonName} + ID id-nf-subentryNameForm +} + +subtreeSpecification ATTRIBUTE ::= { + WITH SYNTAX SubtreeSpecification + USAGE directoryOperation + ID id-oa-subtreeSpecification +} + +administrativeRole ATTRIBUTE ::= { + WITH SYNTAX OBJECT-CLASS.&id + EQUALITY MATCHING RULE objectIdentifierMatch + USAGE directoryOperation + ID id-oa-administrativeRole +} + +createTimestamp ATTRIBUTE ::= { + WITH SYNTAX GeneralizedTime + -- as per 46.3 b) or c) of ITU-T Rec. X.680 | ISO/IEC 8824-1 + EQUALITY MATCHING RULE generalizedTimeMatch + ORDERING MATCHING RULE generalizedTimeOrderingMatch + SINGLE VALUE TRUE + NO USER MODIFICATION TRUE + USAGE directoryOperation + ID id-oa-createTimestamp +} + +modifyTimestamp ATTRIBUTE ::= { + WITH SYNTAX GeneralizedTime + -- as per 46.3 b) or c) of ITU-T Rec. X.680 | ISO/IEC 8824-1 + EQUALITY MATCHING RULE generalizedTimeMatch + ORDERING MATCHING RULE generalizedTimeOrderingMatch + SINGLE VALUE TRUE + NO USER MODIFICATION TRUE + USAGE directoryOperation + ID id-oa-modifyTimestamp +} + +subschemaTimestamp ATTRIBUTE ::= { + WITH SYNTAX GeneralizedTime + -- as per 46.3 b) or c) of ITU-T Rec. X.680 | ISO/IEC 8824-1 + EQUALITY MATCHING RULE generalizedTimeMatch + ORDERING MATCHING RULE generalizedTimeOrderingMatch + SINGLE VALUE TRUE + NO USER MODIFICATION TRUE + USAGE directoryOperation + ID id-oa-subschemaTimestamp +} + +creatorsName ATTRIBUTE ::= { + WITH SYNTAX DistinguishedName + EQUALITY MATCHING RULE distinguishedNameMatch + SINGLE VALUE TRUE + NO USER MODIFICATION TRUE + USAGE directoryOperation + ID id-oa-creatorsName +} + +modifiersName ATTRIBUTE ::= { + WITH SYNTAX DistinguishedName + EQUALITY MATCHING RULE distinguishedNameMatch + SINGLE VALUE TRUE + NO USER MODIFICATION TRUE + USAGE directoryOperation + ID id-oa-modifiersName +} + +subschemaSubentryList ATTRIBUTE ::= { + WITH SYNTAX DistinguishedName + EQUALITY MATCHING RULE distinguishedNameMatch + SINGLE VALUE TRUE + NO USER MODIFICATION TRUE + USAGE directoryOperation + ID id-oa-subschemaSubentryList +} + +accessControlSubentryList ATTRIBUTE ::= { + WITH SYNTAX DistinguishedName + EQUALITY MATCHING RULE distinguishedNameMatch + NO USER MODIFICATION TRUE + USAGE directoryOperation + ID id-oa-accessControlSubentryList +} + +collectiveAttributeSubentryList ATTRIBUTE ::= { + WITH SYNTAX DistinguishedName + EQUALITY MATCHING RULE distinguishedNameMatch + NO USER MODIFICATION TRUE + USAGE directoryOperation + ID id-oa-collectiveAttributeSubentryList +} + +contextDefaultSubentryList ATTRIBUTE ::= { + WITH SYNTAX DistinguishedName + EQUALITY MATCHING RULE distinguishedNameMatch + NO USER MODIFICATION TRUE + USAGE directoryOperation + ID id-oa-contextDefaultSubentryList +} + +serviceAdminSubentryList ATTRIBUTE ::= { + WITH SYNTAX DistinguishedName + EQUALITY MATCHING RULE distinguishedNameMatch + NO USER MODIFICATION TRUE + USAGE directoryOperation + ID id-oa-serviceAdminSubentryList +} + +hasSubordinates ATTRIBUTE ::= { + WITH SYNTAX BOOLEAN + EQUALITY MATCHING RULE booleanMatch + SINGLE VALUE TRUE + NO USER MODIFICATION TRUE + USAGE directoryOperation + ID id-oa-hasSubordinates +} + +accessControlSubentry OBJECT-CLASS ::= { + KIND auxiliary + ID id-sc-accessControlSubentry +} + +collectiveAttributeSubentry OBJECT-CLASS ::= { + KIND auxiliary + ID id-sc-collectiveAttributeSubentry +} + +collectiveExclusions ATTRIBUTE ::= { + WITH SYNTAX OBJECT IDENTIFIER + EQUALITY MATCHING RULE objectIdentifierMatch + USAGE directoryOperation + ID id-oa-collectiveExclusions +} + +contextAssertionSubentry OBJECT-CLASS ::= { + KIND auxiliary + MUST CONTAIN {contextAssertionDefaults} + ID id-sc-contextAssertionSubentry +} + +contextAssertionDefaults ATTRIBUTE ::= { + WITH SYNTAX TypeAndContextAssertion + EQUALITY MATCHING RULE objectIdentifierFirstComponentMatch + USAGE directoryOperation + ID id-oa-contextAssertionDefault +} + +serviceAdminSubentry OBJECT-CLASS ::= { + KIND auxiliary + MUST CONTAIN {searchRules} + ID id-sc-serviceAdminSubentry +} + +searchRules ATTRIBUTE ::= { + WITH SYNTAX SearchRuleDescription + EQUALITY MATCHING RULE integerFirstComponentMatch + USAGE directoryOperation + ID id-oa-searchRules +} + +SearchRuleDescription ::= SEQUENCE { + COMPONENTS OF SearchRule, + name [28] SET SIZE (1..MAX) OF UnboundedDirectoryString OPTIONAL, + description [29] UnboundedDirectoryString OPTIONAL +} + +hierarchyLevel ATTRIBUTE ::= { + WITH SYNTAX HierarchyLevel + EQUALITY MATCHING RULE integerMatch + ORDERING MATCHING RULE integerOrderingMatch + SINGLE VALUE TRUE + NO USER MODIFICATION TRUE + USAGE directoryOperation + ID id-oa-hierarchyLevel +} + +HierarchyLevel ::= INTEGER + +hierarchyBelow ATTRIBUTE ::= { + WITH SYNTAX HierarchyBelow + EQUALITY MATCHING RULE booleanMatch + SINGLE VALUE TRUE + NO USER MODIFICATION TRUE + USAGE directoryOperation + ID id-oa-hierarchyBelow +} + +HierarchyBelow ::= BOOLEAN + +hierarchyParent ATTRIBUTE ::= { + WITH SYNTAX DistinguishedName + EQUALITY MATCHING RULE distinguishedNameMatch + SINGLE VALUE TRUE + USAGE directoryOperation + ID id-oa-hierarchyParent +} + +hierarchyTop ATTRIBUTE ::= { + WITH SYNTAX DistinguishedName + EQUALITY MATCHING RULE distinguishedNameMatch + SINGLE VALUE TRUE + USAGE directoryOperation + ID id-oa-hierarchyTop +} + +-- object identifier assignments +-- object classes +id-oc-top OBJECT IDENTIFIER ::= + {id-oc 0} + +id-oc-alias OBJECT IDENTIFIER ::= {id-oc 1} + +id-oc-parent OBJECT IDENTIFIER ::= {id-oc 28} + +id-oc-child OBJECT IDENTIFIER ::= {id-oc 29} + +-- attributes +id-at-objectClass OBJECT IDENTIFIER ::= {id-at 0} + +id-at-aliasedEntryName OBJECT IDENTIFIER ::= {id-at 1} + +-- matching rules +id-mr-objectIdentifierMatch OBJECT IDENTIFIER ::= {id-mr 0} + +id-mr-distinguishedNameMatch OBJECT IDENTIFIER ::= {id-mr 1} + +-- operational attributes +id-oa-excludeAllCollectiveAttributes OBJECT IDENTIFIER ::= + {id-oa 0} + +id-oa-createTimestamp OBJECT IDENTIFIER ::= {id-oa 1} + +id-oa-modifyTimestamp OBJECT IDENTIFIER ::= {id-oa 2} + +id-oa-creatorsName OBJECT IDENTIFIER ::= {id-oa 3} + +id-oa-modifiersName OBJECT IDENTIFIER ::= {id-oa 4} + +id-oa-administrativeRole OBJECT IDENTIFIER ::= {id-oa 5} + +id-oa-subtreeSpecification OBJECT IDENTIFIER ::= {id-oa 6} + +id-oa-collectiveExclusions OBJECT IDENTIFIER ::= {id-oa 7} + +id-oa-subschemaTimestamp OBJECT IDENTIFIER ::= {id-oa 8} + +id-oa-hasSubordinates OBJECT IDENTIFIER ::= {id-oa 9} + +id-oa-subschemaSubentryList OBJECT IDENTIFIER ::= {id-oa 10} + +id-oa-accessControlSubentryList OBJECT IDENTIFIER ::= {id-oa 11} + +id-oa-collectiveAttributeSubentryList OBJECT IDENTIFIER ::= {id-oa 12} + +id-oa-contextDefaultSubentryList OBJECT IDENTIFIER ::= {id-oa 13} + +id-oa-contextAssertionDefault OBJECT IDENTIFIER ::= {id-oa 14} + +id-oa-serviceAdminSubentryList OBJECT IDENTIFIER ::= {id-oa 15} + +id-oa-searchRules OBJECT IDENTIFIER ::= {id-oa 16} + +id-oa-hierarchyLevel OBJECT IDENTIFIER ::= {id-oa 17} + +id-oa-hierarchyBelow OBJECT IDENTIFIER ::= {id-oa 18} + +id-oa-hierarchyParent OBJECT IDENTIFIER ::= {id-oa 19} + +id-oa-hierarchyTop OBJECT IDENTIFIER ::= {id-oa 20} + +-- subentry classes +id-sc-subentry OBJECT IDENTIFIER ::= {id-sc 0} + +id-sc-accessControlSubentry OBJECT IDENTIFIER ::= {id-sc 1} + +id-sc-collectiveAttributeSubentry OBJECT IDENTIFIER ::= {id-sc 2} + +id-sc-contextAssertionSubentry OBJECT IDENTIFIER ::= {id-sc 3} + +id-sc-serviceAdminSubentry OBJECT IDENTIFIER ::= {id-sc 4} + +-- Name forms +id-nf-subentryNameForm OBJECT IDENTIFIER ::= {id-nf 16} + +-- administrative roles +id-ar-autonomousArea OBJECT IDENTIFIER ::= {id-ar 1} + +id-ar-accessControlSpecificArea OBJECT IDENTIFIER ::= {id-ar 2} + +id-ar-accessControlInnerArea OBJECT IDENTIFIER ::= {id-ar 3} + +id-ar-subschemaAdminSpecificArea OBJECT IDENTIFIER ::= {id-ar 4} + +id-ar-collectiveAttributeSpecificArea OBJECT IDENTIFIER ::= {id-ar 5} + +id-ar-collectiveAttributeInnerArea OBJECT IDENTIFIER ::= {id-ar 6} + +id-ar-contextDefaultSpecificArea OBJECT IDENTIFIER ::= {id-ar 7} + +id-ar-serviceSpecificArea OBJECT IDENTIFIER ::= {id-ar 8} + +END -- InformationFramework diff --git a/lib/public_key/asn1/Makefile b/lib/public_key/asn1/Makefile index 4bd043ee5d..763b788e53 100644 --- a/lib/public_key/asn1/Makefile +++ b/lib/public_key/asn1/Makefile @@ -40,7 +40,8 @@ RELSYSDIR = $(RELEASE_PATH)/lib/public_key-$(VSN) ASN_TOP = OTP-PUB-KEY PKCS-FRAME ASN_MODULES = PKIX1Explicit88 PKIX1Implicit88 PKIX1Algorithms88 \ - PKIXAttributeCertificate PKCS-1 PKCS-3 PKCS-8 PKCS5v2-0 OTP-PKIX + PKIXAttributeCertificate PKCS-1 PKCS-3 PKCS-7 PKCS-8 PKCS-10 PKCS5v2-0 OTP-PKIX \ + InformationFramework ASN_ASNS = $(ASN_MODULES:%=%.asn1) ASN_ERLS = $(ASN_TOP:%=%.erl) ASN_HRLS = $(ASN_TOP:%=%.hrl) @@ -65,7 +66,7 @@ EBIN = ../ebin EXTRA_ERLC_FLAGS = ERL_COMPILE_FLAGS += $(EXTRA_ERLC_FLAGS) -ASN_FLAGS = -bber_bin +der +compact_bit_string +optimize +noobj +asn1config +inline +nif +ASN_FLAGS = -bber +der +compact_bit_string +noobj +asn1config +inline # ---------------------------------------------------- # Targets @@ -112,9 +113,12 @@ OTP-PUB-KEY.asn1db: PKIX1Algorithms88.asn1 \ PKIXAttributeCertificate.asn1 \ PKCS-1.asn1\ PKCS-3.asn1\ + PKCS-7.asn1\ + PKCS-10.asn1\ + InformationFramework.asn1\ OTP-PKIX.asn1 $(EBIN)/PKCS-FRAME.beam: PKCS-FRAME.erl PKCS-FRAME.hrl -PKCS-FRAME.erl PKCS-FRAME.hrl: PKCS-FRAME.asn1db -PKCS-FRAME.asn1db: PKCS-8.asn1\ - PKCS5v2-0.asn1
\ No newline at end of file +PKCS-FRAME.erl PKCS-FRAME.hrl: PKCS-FRAME.asn1db +PKCS-FRAME.asn1db: PKCS5v2-0.asn1\ + PKCS-8.asn1\ diff --git a/lib/public_key/asn1/OTP-PUB-KEY.set.asn b/lib/public_key/asn1/OTP-PUB-KEY.set.asn index 5c76d13115..f8fb318c93 100644 --- a/lib/public_key/asn1/OTP-PUB-KEY.set.asn +++ b/lib/public_key/asn1/OTP-PUB-KEY.set.asn @@ -6,3 +6,5 @@ PKIX1Algorithms88.asn1 PKCS-1.asn1 PKCS-3.asn1 DSS.asn1 +PKCS-7.asn1 +PKCS-10.asn1 diff --git a/lib/public_key/asn1/PKCS-10.asn1 b/lib/public_key/asn1/PKCS-10.asn1 new file mode 100644 index 0000000000..333104d230 --- /dev/null +++ b/lib/public_key/asn1/PKCS-10.asn1 @@ -0,0 +1,70 @@ +PKCS-10 {iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) +pkcs-10(10) modules(1) pkcs-10(1)} + +-- $Revision: 1.3 $ -- + +DEFINITIONS IMPLICIT TAGS ::= + +BEGIN + +-- EXPORTS All -- +-- All types and values defined in this module are exported for use +-- in other ASN.1 modules. + +IMPORTS + +--informationFramework, authenticationFramework +-- FROM UsefulDefinitions {joint-iso-itu-t(2) ds(5) module(1) +-- usefulDefinitions(0) 3} + + ATTRIBUTE + FROM InformationFramework informationFramework + + Name + FROM PKIX1Explicit88 --InformationFramework informationFramework + + ALGORITHM + FROM PKCS-7; --AuthenticationFramework authenticationFramework; + +-- Certificate requests + +CertificationRequestInfo ::= SEQUENCE { + version INTEGER { v1(0) } (v1,...), + subject Name, + subjectPKInfo SubjectPublicKeyInfo-PKCS-10{{ PKInfoAlgorithms }}, + attributes [0] Attributes{{ CRIAttributes }} +} + +SubjectPublicKeyInfo-PKCS-10 {ALGORITHM: IOSet} ::= SEQUENCE { + algorithm AlgorithmIdentifierPKCS-10{{IOSet}}, + subjectPublicKey BIT STRING +} + +PKInfoAlgorithms ALGORITHM ::= { + ... -- add any locally defined algorithms here -- } + +Attributes { ATTRIBUTE:IOSet } ::= SET OF AttributePKCS-10{{ IOSet }} + +CRIAttributes ATTRIBUTE ::= { +... -- add any locally defined attributes here -- } + +AttributePKCS-10 { ATTRIBUTE:IOSet } ::= SEQUENCE { + type ATTRIBUTE.&id({IOSet}), + values SET SIZE(1..MAX) OF ATTRIBUTE.&Type({IOSet}{@type}) +} + +CertificationRequest ::= SEQUENCE { + certificationRequestInfo CertificationRequestInfo, + signatureAlgorithm AlgorithmIdentifierPKCS-10{{ SignatureAlgorithms }}, + signature BIT STRING +} + +AlgorithmIdentifierPKCS-10 {ALGORITHM:IOSet } ::= SEQUENCE { + algorithm ALGORITHM.&id({IOSet}), + parameters ALGORITHM.&Type({IOSet}{@algorithm}) OPTIONAL +} + +SignatureAlgorithms ALGORITHM ::= { + ... -- add any locally defined algorithms here -- } + +END diff --git a/lib/public_key/asn1/PKCS-7.asn1 b/lib/public_key/asn1/PKCS-7.asn1 new file mode 100644 index 0000000000..a6dfd57d80 --- /dev/null +++ b/lib/public_key/asn1/PKCS-7.asn1 @@ -0,0 +1,387 @@ +PKCS-7 {iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) pkcs-7(7) + modules(0) pkcs-7(1)} + +DEFINITIONS EXPLICIT TAGS ::= +BEGIN + +-- +-- 3. Definitions +-- + +-- EXPORTS All; + +IMPORTS + +informationFramework, authenticationFramework + FROM UsefulDefinitions {joint-iso-itu-t ds(5) module(1) + usefulDefinitions(0) 3} + + ATTRIBUTE + FROM InformationFramework informationFramework + + Name, Certificate, CertificateSerialNumber, + CertificateList, Time + FROM PKIX1Explicit88; -- AuthenticationFramework authenticationFramework; + +-- contentType, messageDigest, signingTime +-- , counterSignature +-- FROM PKCS-9 {iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) +-- pkcs-9(9) modules(0) pkcs-9(1)}; +-- +-- 6. Useful types +-- + +-- inlined from AuthenticationFramework + +ALGORITHM ::= CLASS {&Type OPTIONAL, + &id OBJECT IDENTIFIER UNIQUE +}WITH SYNTAX {[&Type] + IDENTIFIED BY &id +} + +-- inlined from PKCS-9 + +pkcs-9 OBJECT IDENTIFIER ::= {iso(1) member-body(2) us(840) + rsadsi(113549) pkcs(1) 9} + +contentType ATTRIBUTE ::= { + WITH SYNTAX ContentType +-- EQUALITY MATCHING RULE objectIdentifierMatch + SINGLE VALUE TRUE + ID pkcs-9-at-contentType +} + +pkcs-9-at-contentType OBJECT IDENTIFIER ::= {pkcs-9 3} +pkcs-9-at-messageDigest OBJECT IDENTIFIER ::= {pkcs-9 4} +pkcs-9-at-signingTime OBJECT IDENTIFIER ::= {pkcs-9 5} +pkcs-9-at-counterSignature OBJECT IDENTIFIER ::= {pkcs-9 6} + +counterSignature ATTRIBUTE ::= { + WITH SYNTAX SignerInfo + ID pkcs-9-at-counterSignature +} +messageDigest ATTRIBUTE ::= { + WITH SYNTAX MessageDigest +-- EQUALITY MATCHING RULE octetStringMatch + SINGLE VALUE TRUE + ID pkcs-9-at-messageDigest +} + +MessageDigest ::= OCTET STRING + +signingTime ATTRIBUTE ::= { + WITH SYNTAX SigningTime +-- EQUALITY MATCHING RULE signingTimeMatch + SINGLE VALUE TRUE + ID pkcs-9-at-signingTime +} + +SigningTime ::= Time -- imported from ISO/IEC 9594-8 + + +-- Also defined in X.509 +-- Redeclared here as a parameterized type +AlgorithmIdentifierPKSC-7 {ALGORITHM:IOSet} ::= SEQUENCE { + algorithm ALGORITHM.&id({IOSet}), + parameters ALGORITHM.&Type({IOSet}{@algorithm}) OPTIONAL +} + +-- Also defined in X.501 +-- Redeclared here as a parameterized type +AttributePKCS-7 { ATTRIBUTE:IOSet } ::= SEQUENCE { + type ATTRIBUTE.&id({IOSet}), + values SET SIZE (1..MAX) OF ATTRIBUTE.&Type({IOSet}{@type}) +} + +CertificateRevocationLists ::= + SET OF CertificateList + +Certificates ::= + SEQUENCE OF Certificate + +CRLSequence ::= + SEQUENCE OF CertificateList + +ContentEncryptionAlgorithmIdentifier ::= + AlgorithmIdentifierPKSC-7 {{ContentEncryptionAlgorithms}} + +ContentEncryptionAlgorithms ALGORITHM ::= { + ... -- add any application-specific algorithms here +} + +DigestAlgorithmIdentifier ::= + AlgorithmIdentifierPKSC-7 {{DigestAlgorithms}} + +DigestAlgorithms ALGORITHM ::= { + ... -- add any application-specific algorithms here +} + +DigestEncryptionAlgorithmIdentifier ::= + AlgorithmIdentifierPKSC-7 {{DigestEncryptionAlgorithms}} + +DigestEncryptionAlgorithms ALGORITHM ::= { + ... -- add any application-specific algorithms here +} + +ExtendedCertificateOrCertificate ::= CHOICE { + certificate Certificate, -- X.509 + extendedCertificate [0] IMPLICIT ExtendedCertificate -- PKCS#6 +} + +ExtendedCertificate ::= Certificate -- cheating + +ExtendedCertificatesAndCertificates ::= + SET OF ExtendedCertificateOrCertificate + +IssuerAndSerialNumber ::= SEQUENCE { + issuer Name, + serialNumber CertificateSerialNumber +} + +KeyEncryptionAlgorithmIdentifier ::= + AlgorithmIdentifierPKSC-7 {{KeyEncryptionAlgorithms}} + +KeyEncryptionAlgorithms ALGORITHM ::= { + ... -- add any application-specific algorithms here +} + +-- +-- 7. General syntax +-- + +ContentInfo ::= SEQUENCE { +-- contentType ContentType, + contentType CONTENTS.&id({Contents}), + content [0] EXPLICIT CONTENTS.&Type({Contents}{@contentType}) +OPTIONAL +} + +CONTENTS ::= TYPE-IDENTIFIER + +Contents CONTENTS ::= { + {Data IDENTIFIED BY data} | + {SignedData IDENTIFIED BY signedData} | + {EnvelopedData IDENTIFIED BY envelopedData} | + {SignedAndEnvelopedData IDENTIFIED BY signedAndEnvelopedData} | + {DigestedData IDENTIFIED BY digestedData} | + {EncryptedData IDENTIFIED BY encryptedData}, + ... -- add any application-specific types/contents here +} + +ContentType ::= CONTENTS.&id({Contents}) + +-- +-- 8. Data content type +-- + +Data ::= OCTET STRING + +-- +-- 9. Signed-data content type +-- + +SignedData ::= SEQUENCE { +-- version INTEGER {sdVer1(1), sdVer2(2)} (sdVer1 | sdVer2), + version INTEGER {sdVer1(1), sdVer2(2)}, + digestAlgorithms + DigestAlgorithmIdentifiers, + contentInfo ContentInfo, + certificates CHOICE { + certSet [0] IMPLICIT ExtendedCertificatesAndCertificates, + certSequence [2] IMPLICIT Certificates + } OPTIONAL, + crls CHOICE { + crlSet [1] IMPLICIT CertificateRevocationLists, + crlSequence [3] IMPLICIT CRLSequence + } OPTIONAL, + signerInfos SignerInfos +} (WITH COMPONENTS { ..., version (sdVer1), + digestAlgorithms (WITH COMPONENTS { ..., daSet PRESENT }), + certificates (WITH COMPONENTS { ..., certSequence ABSENT }), + crls (WITH COMPONENTS { ..., crlSequence ABSENT }), + signerInfos (WITH COMPONENTS { ..., siSet PRESENT }) + } | + WITH COMPONENTS { ..., version (sdVer2), + digestAlgorithms (WITH COMPONENTS { ..., daSequence PRESENT }), + certificates (WITH COMPONENTS { ..., certSet ABSENT }), + crls (WITH COMPONENTS { ..., crlSet ABSENT }), + signerInfos (WITH COMPONENTS { ..., siSequence PRESENT }) +}) + +SignerInfos ::= CHOICE { + siSet SET OF SignerInfo, + siSequence SEQUENCE OF SignerInfo +} + +DigestAlgorithmIdentifiers ::= CHOICE { + daSet SET OF DigestAlgorithmIdentifier, + daSequence SEQUENCE OF DigestAlgorithmIdentifier +} + +SignerInfo ::= SEQUENCE { +-- version INTEGER {siVer1(1), siVer2(2)} (siVer1 | siVer2), + version INTEGER {siVer1(1), siVer2(2)}, + issuerAndSerialNumber + IssuerAndSerialNumber, + digestAlgorithm DigestAlgorithmIdentifier, + authenticatedAttributes CHOICE { + aaSet [0] IMPLICIT SET OF AttributePKCS-7 {{Authenticated}}, + aaSequence [2] EXPLICIT SEQUENCE OF AttributePKCS-7 {{Authenticated}} + -- Explicit because easier to compute digest on sequence of attributes and then reuse + -- encoded sequence in aaSequence. + } OPTIONAL, + digestEncryptionAlgorithm + DigestEncryptionAlgorithmIdentifier, + encryptedDigest EncryptedDigest, + unauthenticatedAttributes CHOICE { + uaSet [1] IMPLICIT SET OF AttributePKCS-7 {{Unauthenticated}}, + uaSequence [3] IMPLICIT SEQUENCE OF AttributePKCS-7 {{Unauthenticated}} + } OPTIONAL +} (WITH COMPONENTS { ..., version (siVer1), + authenticatedAttributes (WITH COMPONENTS { ..., aaSequence ABSENT }), + unauthenticatedAttributes (WITH COMPONENTS { ..., uaSequence ABSENT }) +} | WITH COMPONENTS { ..., version (siVer2), + authenticatedAttributes (WITH COMPONENTS { ..., aaSet ABSENT }), + unauthenticatedAttributes (WITH COMPONENTS { ..., uaSet ABSENT }) +}) + +Authenticated ATTRIBUTE ::= { + contentType | + messageDigest, + ..., -- add application-specific attributes here + signingTime +} + +Unauthenticated ATTRIBUTE ::= { + contentType | + messageDigest, + ..., -- add application-specific attributes here + counterSignature +-- ..., add application-specific attributes here +-- counterSignature +} + +EncryptedDigest ::= OCTET STRING + +DigestInfo ::= SEQUENCE { + digestAlgorithm DigestAlgorithmIdentifier, + digest Digest +} + +Digest ::= OCTET STRING + +-- +-- 10. Enveloped-data content type +-- + +EnvelopedData ::= SEQUENCE { +-- version INTEGER {edVer0(0), edVer1(1)} (edVer0 | edVer1), + version INTEGER {edVer0(0), edVer1(1)}, + recipientInfos RecipientInfos, + encryptedContentInfo + EncryptedContentInfo +} (WITH COMPONENTS { ..., version (edVer0), + recipientInfos (WITH COMPONENTS { ..., riSet PRESENT }) +} | WITH COMPONENTS { ..., version (edVer1), + recipientInfos (WITH COMPONENTS { ..., riSequence PRESENT }) +}) + +RecipientInfos ::= CHOICE { + riSet SET OF RecipientInfo, + riSequence SEQUENCE OF RecipientInfo +} + +EncryptedContentInfo ::= SEQUENCE { + contentType ContentType, + contentEncryptionAlgorithm + ContentEncryptionAlgorithmIdentifier, + encryptedContent + [0] IMPLICIT EncryptedContent OPTIONAL +} + +EncryptedContent ::= OCTET STRING + +RecipientInfo ::= SEQUENCE { +-- version INTEGER {riVer0(0)} (riVer0), + version INTEGER {riVer0(0)}, + issuerAndSerialNumber + IssuerAndSerialNumber, + keyEncryptionAlgorithm + KeyEncryptionAlgorithmIdentifier, + encryptedKey EncryptedKey +} + +EncryptedKey ::= OCTET STRING + +-- +-- 11. Signed-and-enveloped-data content type +-- + +SignedAndEnvelopedData ::= SEQUENCE { +-- version INTEGER {seVer1(1), seVer2(2)} (seVer1 | seVer2), + version INTEGER {seVer1(1), seVer2(2)}, + recipientInfos RecipientInfos, + digestAlgorithms + DigestAlgorithmIdentifiers, + encryptedContentInfo + EncryptedContentInfo, + certificates CHOICE { + certSet [0] IMPLICIT ExtendedCertificatesAndCertificates, + certSequence [2] IMPLICIT Certificates + } OPTIONAL, + crls CHOICE { + crlSet [1] IMPLICIT CertificateRevocationLists, + crlSequence [3] IMPLICIT CRLSequence + } OPTIONAL, + signerInfos SignerInfos +} (WITH COMPONENTS { ..., version (seVer1), + recipientInfos (WITH COMPONENTS { ..., riSet PRESENT }), + digestAlgorithms (WITH COMPONENTS { ..., daSet PRESENT }), + certificates (WITH COMPONENTS { ..., certSequence ABSENT }), + crls (WITH COMPONENTS { ..., crlSequence ABSENT }), + signerInfos (WITH COMPONENTS { ..., siSet PRESENT }) +} | + WITH COMPONENTS { ..., version (seVer2), + recipientInfos (WITH COMPONENTS { ..., riSequence PRESENT }), + digestAlgorithms (WITH COMPONENTS { ..., daSequence PRESENT }), + certificates (WITH COMPONENTS { ..., certSet ABSENT }), + crls (WITH COMPONENTS { ..., crlSet ABSENT }), + signerInfos (WITH COMPONENTS { ..., siSequence PRESENT }) +}) + +-- +-- 12. Digested-data content type +--pbeWithSHAAnd3-KeyTripleDES-CBC + +DigestedData ::= SEQUENCE { +-- version INTEGER {ddVer0(0)} (ddVer0), + version INTEGER {ddVer0(0)}, + digestAlgorithm DigestAlgorithmIdentifier, + contentInfo ContentInfo, + digest Digest +} + +-- +-- 13. Encrypted-data content type +-- + +EncryptedData ::= SEQUENCE { +-- version INTEGER {edVer0(0)} (edVer0), + version INTEGER {edVer0(0)}, + encryptedContentInfo EncryptedContentInfo +} + +-- +-- 14. Object Identifiers +-- + +pkcs-7 OBJECT IDENTIFIER ::= + { iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) 7 } +data OBJECT IDENTIFIER ::= { pkcs-7 1 } +signedData OBJECT IDENTIFIER ::= { pkcs-7 2 } +envelopedData OBJECT IDENTIFIER ::= { pkcs-7 3 } +signedAndEnvelopedData OBJECT IDENTIFIER ::= { pkcs-7 4 } +digestedData OBJECT IDENTIFIER ::= { pkcs-7 5 } +encryptedData OBJECT IDENTIFIER ::= { pkcs-7 6 } + +END diff --git a/lib/public_key/asn1/PKIX1Explicit88.asn1 b/lib/public_key/asn1/PKIX1Explicit88.asn1 index 03e9da3e05..91758d7269 100644 --- a/lib/public_key/asn1/PKIX1Explicit88.asn1 +++ b/lib/public_key/asn1/PKIX1Explicit88.asn1 @@ -206,13 +206,12 @@ DomainComponent ::= IA5String -- Legacy attributes -pkcs-9 OBJECT IDENTIFIER ::= - { iso(1) member-body(2) us(840) rsadsi(113549) pkcs(1) 9 } - id-emailAddress AttributeType ::= { pkcs-9 1 } EmailAddress ::= IA5String (SIZE (1..ub-emailaddress-length)) +-- Legacy attributes + -- naming data types -- Name ::= CHOICE { -- only one possibility for now -- diff --git a/lib/public_key/asn1/SelectedAttributeTypes.asn1 b/lib/public_key/asn1/SelectedAttributeTypes.asn1 new file mode 100644 index 0000000000..3ef7077370 --- /dev/null +++ b/lib/public_key/asn1/SelectedAttributeTypes.asn1 @@ -0,0 +1,1575 @@ +SelectedAttributeTypes {joint-iso-itu-t ds(5) module(1) + selectedAttributeTypes(5) 6} DEFINITIONS ::= +BEGIN + +-- EXPORTS All +-- The types and values defined in this module are exported for use in the other ASN.1 modules contained +-- within the Directory Specifications, and for the use of other applications which will use them to access +-- Directory services. Other applications may use them for their own purposes, but this will not constrain +-- extensions and modifications needed to maintain or improve the Directory service. +IMPORTS + -- from ITU-T Rec. X.501 | ISO/IEC 9594-2 + directoryAbstractService, id-at, id-avc, id-cat, id-mr, id-not, id-pr, + informationFramework, serviceAdministration + FROM UsefulDefinitions {joint-iso-itu-t ds(5) module(1) + usefulDefinitions(0) 6} + Attribute{}, ATTRIBUTE, AttributeType, AttributeValueAssertion, CONTEXT, + ContextAssertion, DistinguishedName, distinguishedNameMatch, + MAPPING-BASED-MATCHING{}, MATCHING-RULE, OBJECT-CLASS, + objectIdentifierMatch, SupportedAttributes + FROM InformationFramework informationFramework + AttributeCombination, ContextCombination, MRMapping + FROM ServiceAdministration serviceAdministration + -- from ITU-T Rec. X.511 | ISO/IEC 9594-3 + FilterItem, HierarchySelections, SearchControlOptions, ServiceControlOptions + FROM DirectoryAbstractService directoryAbstractService + -- from ITU-T Rec. X.411 | ISO/IEC 10021-4 + G3FacsimileNonBasicParameters + FROM MTSAbstractService {joint-iso-itu-t mhs(6) mts(3) modules(0) + mts-abstract-service(1) version-1999(1)}; + +/*from IETF RFC 3727 + +The following import is provided for information only (see 7.2.16), it is not referenced by any ASN.1 construct within these Directory Specifications. Note that the ASN.1 module in RFC 3727 imports from the InformationFramework module of edition 4 of ITU-T Rec. X.501 | ISO/IEC 9594-2. A specification importing from both these Directory Specifications and from RFC 3727 should take corrective actions, e.g., by making a copy of the ASN.1 module of +RFC 3727 and then update the IMPORT statement. + + allComponentsMatch, componentFilterMatch, directoryComponentsMatch, presentMatch, rdnMatch + FROM ComponentMatching {iso(1) 2 36 79672281 xed(3) module (0) + component-matching(4)} */ +-- Directory string type +UnboundedDirectoryString ::= CHOICE { + teletexString TeletexString(SIZE (1..MAX)), + printableString PrintableString(SIZE (1..MAX)), + bmpString BMPString(SIZE (1..MAX)), + universalString UniversalString(SIZE (1..MAX)), + uTF8String UTF8String(SIZE (1..MAX)) +} + +DirectoryString{INTEGER:maxSize} ::= CHOICE { + teletexString TeletexString(SIZE (1..maxSize)), + printableString PrintableString(SIZE (1..maxSize)), + bmpString BMPString(SIZE (1..maxSize)), + universalString UniversalString(SIZE (1..maxSize)), + uTF8String UTF8String(SIZE (1..maxSize)) +} + +-- Attribute types +knowledgeInformation ATTRIBUTE ::= { + WITH SYNTAX UnboundedDirectoryString + EQUALITY MATCHING RULE caseIgnoreMatch + ID id-at-knowledgeInformation +} + +name ATTRIBUTE ::= { + WITH SYNTAX UnboundedDirectoryString + EQUALITY MATCHING RULE caseIgnoreMatch + SUBSTRINGS MATCHING RULE caseIgnoreSubstringsMatch + ID id-at-name +} + +commonName ATTRIBUTE ::= { + SUBTYPE OF name + WITH SYNTAX UnboundedDirectoryString + ID id-at-commonName +} + +surname ATTRIBUTE ::= { + SUBTYPE OF name + WITH SYNTAX UnboundedDirectoryString + ID id-at-surname +} + +givenName ATTRIBUTE ::= { + SUBTYPE OF name + WITH SYNTAX UnboundedDirectoryString + ID id-at-givenName +} + +initials ATTRIBUTE ::= { + SUBTYPE OF name + WITH SYNTAX UnboundedDirectoryString + ID id-at-initials +} + +generationQualifier ATTRIBUTE ::= { + SUBTYPE OF name + WITH SYNTAX UnboundedDirectoryString + ID id-at-generationQualifier +} + +uniqueIdentifier ATTRIBUTE ::= { + WITH SYNTAX UniqueIdentifier + EQUALITY MATCHING RULE bitStringMatch + ID id-at-uniqueIdentifier +} + +UniqueIdentifier ::= BIT STRING + +dnQualifier ATTRIBUTE ::= { + WITH SYNTAX PrintableString + EQUALITY MATCHING RULE caseIgnoreMatch + ORDERING MATCHING RULE caseIgnoreOrderingMatch + SUBSTRINGS MATCHING RULE caseIgnoreSubstringsMatch + ID id-at-dnQualifier +} + +serialNumber ATTRIBUTE ::= { + WITH SYNTAX PrintableString(SIZE (1..MAX)) + EQUALITY MATCHING RULE caseIgnoreMatch + SUBSTRINGS MATCHING RULE caseIgnoreSubstringsMatch + ID id-at-serialNumber +} + +pseudonym ATTRIBUTE ::= { + SUBTYPE OF name + WITH SYNTAX UnboundedDirectoryString + ID id-at-pseudonym +} + +uUIDPair ATTRIBUTE ::= { + WITH SYNTAX UUIDPair + EQUALITY MATCHING RULE uUIDPairMatch + ID id-at-uuidpair +} + +UUIDPair ::= SEQUENCE {issuerUUID UUID, + subjectUUID UUID +} + +UUID ::= OCTET STRING(SIZE (16)) -- UUID format only + + +countryName ATTRIBUTE ::= { + SUBTYPE OF name + WITH SYNTAX CountryName + SINGLE VALUE TRUE + ID id-at-countryName +} + +CountryName ::= PrintableString(SIZE (2)) -- ISO 3166 codes only + + +localityName ATTRIBUTE ::= { + SUBTYPE OF name + WITH SYNTAX UnboundedDirectoryString + ID id-at-localityName +} + +collectiveLocalityName ATTRIBUTE ::= { + SUBTYPE OF localityName + COLLECTIVE TRUE + ID id-at-collectiveLocalityName +} + +stateOrProvinceName ATTRIBUTE ::= { + SUBTYPE OF name + WITH SYNTAX UnboundedDirectoryString + ID id-at-stateOrProvinceName +} + +collectiveStateOrProvinceName ATTRIBUTE ::= { + SUBTYPE OF stateOrProvinceName + COLLECTIVE TRUE + ID id-at-collectiveStateOrProvinceName +} + +streetAddress ATTRIBUTE ::= { + WITH SYNTAX UnboundedDirectoryString + EQUALITY MATCHING RULE caseIgnoreMatch + SUBSTRINGS MATCHING RULE caseIgnoreSubstringsMatch + ID id-at-streetAddress +} + +collectiveStreetAddress ATTRIBUTE ::= { + SUBTYPE OF streetAddress + COLLECTIVE TRUE + ID id-at-collectiveStreetAddress +} + +houseIdentifier ATTRIBUTE ::= { + WITH SYNTAX UnboundedDirectoryString + EQUALITY MATCHING RULE caseIgnoreMatch + SUBSTRINGS MATCHING RULE caseIgnoreSubstringsMatch + ID id-at-houseIdentifier +} + +organizationName ATTRIBUTE ::= { + SUBTYPE OF name + WITH SYNTAX UnboundedDirectoryString + ID id-at-organizationName +} + +collectiveOrganizationName ATTRIBUTE ::= { + SUBTYPE OF organizationName + COLLECTIVE TRUE + ID id-at-collectiveOrganizationName +} + +organizationalUnitName ATTRIBUTE ::= { + SUBTYPE OF name + WITH SYNTAX UnboundedDirectoryString + ID id-at-organizationalUnitName +} + +collectiveOrganizationalUnitName ATTRIBUTE ::= { + SUBTYPE OF organizationalUnitName + COLLECTIVE TRUE + ID id-at-collectiveOrganizationalUnitName +} + +title ATTRIBUTE ::= { + SUBTYPE OF name + WITH SYNTAX UnboundedDirectoryString + ID id-at-title +} + +description ATTRIBUTE ::= { + WITH SYNTAX UnboundedDirectoryString + EQUALITY MATCHING RULE caseIgnoreMatch + SUBSTRINGS MATCHING RULE caseIgnoreSubstringsMatch + ID id-at-description +} + +searchGuide ATTRIBUTE ::= {WITH SYNTAX Guide + ID id-at-searchGuide +} + +Guide ::= SET { + objectClass [0] OBJECT-CLASS.&id OPTIONAL, + criteria [1] Criteria +} + +Criteria ::= CHOICE { + type [0] CriteriaItem, + and [1] SET OF Criteria, + or [2] SET OF Criteria, + not [3] Criteria +} + +CriteriaItem ::= CHOICE { + equality [0] AttributeType, + substrings [1] AttributeType, + greaterOrEqual [2] AttributeType, + lessOrEqual [3] AttributeType, + approximateMatch [4] AttributeType +} + +enhancedSearchGuide ATTRIBUTE ::= { + WITH SYNTAX EnhancedGuide + ID id-at-enhancedSearchGuide +} + +EnhancedGuide ::= SEQUENCE { + objectClass [0] OBJECT-CLASS.&id, + criteria [1] Criteria, + subset + [2] INTEGER {baseObject(0), oneLevel(1), wholeSubtree(2)} DEFAULT oneLevel +} + +businessCategory ATTRIBUTE ::= { + WITH SYNTAX UnboundedDirectoryString + EQUALITY MATCHING RULE caseIgnoreMatch + SUBSTRINGS MATCHING RULE caseIgnoreSubstringsMatch + ID id-at-businessCategory +} + +postalAddress ATTRIBUTE ::= { + WITH SYNTAX PostalAddress + EQUALITY MATCHING RULE caseIgnoreListMatch + SUBSTRINGS MATCHING RULE caseIgnoreListSubstringsMatch + ID id-at-postalAddress +} + +PostalAddress ::= SEQUENCE SIZE (1..MAX) OF UnboundedDirectoryString + +collectivePostalAddress ATTRIBUTE ::= { + SUBTYPE OF postalAddress + COLLECTIVE TRUE + ID id-at-collectivePostalAddress +} + +postalCode ATTRIBUTE ::= { + WITH SYNTAX UnboundedDirectoryString + EQUALITY MATCHING RULE caseIgnoreMatch + SUBSTRINGS MATCHING RULE caseIgnoreSubstringsMatch + ID id-at-postalCode +} + +collectivePostalCode ATTRIBUTE ::= { + SUBTYPE OF postalCode + COLLECTIVE TRUE + ID id-at-collectivePostalCode +} + +postOfficeBox ATTRIBUTE ::= { + WITH SYNTAX UnboundedDirectoryString + EQUALITY MATCHING RULE caseIgnoreMatch + SUBSTRINGS MATCHING RULE caseIgnoreSubstringsMatch + ID id-at-postOfficeBox +} + +collectivePostOfficeBox ATTRIBUTE ::= { + SUBTYPE OF postOfficeBox + COLLECTIVE TRUE + ID id-at-collectivePostOfficeBox +} + +physicalDeliveryOfficeName ATTRIBUTE ::= { + WITH SYNTAX UnboundedDirectoryString + EQUALITY MATCHING RULE caseIgnoreMatch + SUBSTRINGS MATCHING RULE caseIgnoreSubstringsMatch + ID id-at-physicalDeliveryOfficeName +} + +collectivePhysicalDeliveryOfficeName ATTRIBUTE ::= { + SUBTYPE OF physicalDeliveryOfficeName + COLLECTIVE TRUE + ID id-at-collectivePhysicalDeliveryOfficeName +} + +telephoneNumber ATTRIBUTE ::= { + WITH SYNTAX TelephoneNumber + EQUALITY MATCHING RULE telephoneNumberMatch + SUBSTRINGS MATCHING RULE telephoneNumberSubstringsMatch + ID id-at-telephoneNumber +} + +TelephoneNumber ::= PrintableString(SIZE (1..ub-telephone-number)) + +-- String complying with ITU-T Rec. E.123 only +ub-telephone-number INTEGER ::= + 32 + +collectiveTelephoneNumber ATTRIBUTE ::= { + SUBTYPE OF telephoneNumber + COLLECTIVE TRUE + ID id-at-collectiveTelephoneNumber +} + +telexNumber ATTRIBUTE ::= { + WITH SYNTAX TelexNumber + ID id-at-telexNumber +} + +TelexNumber ::= SEQUENCE { + telexNumber PrintableString(SIZE (1..ub-telex-number)), + countryCode PrintableString(SIZE (1..ub-country-code)), + answerback PrintableString(SIZE (1..ub-answerback)) +} + +ub-telex-number INTEGER ::= 14 + +ub-country-code INTEGER ::= 4 + +ub-answerback INTEGER ::= 8 + +collectiveTelexNumber ATTRIBUTE ::= { + SUBTYPE OF telexNumber + COLLECTIVE TRUE + ID id-at-collectiveTelexNumber +} + +facsimileTelephoneNumber ATTRIBUTE ::= { + WITH SYNTAX FacsimileTelephoneNumber + EQUALITY MATCHING RULE facsimileNumberMatch + SUBSTRINGS MATCHING RULE facsimileNumberSubstringsMatch + ID id-at-facsimileTelephoneNumber +} + +FacsimileTelephoneNumber ::= SEQUENCE { + telephoneNumber TelephoneNumber, + parameters G3FacsimileNonBasicParameters OPTIONAL +} + +collectiveFacsimileTelephoneNumber ATTRIBUTE ::= { + SUBTYPE OF facsimileTelephoneNumber + COLLECTIVE TRUE + ID id-at-collectiveFacsimileTelephoneNumber +} + +x121Address ATTRIBUTE ::= { + WITH SYNTAX X121Address + EQUALITY MATCHING RULE numericStringMatch + SUBSTRINGS MATCHING RULE numericStringSubstringsMatch + ID id-at-x121Address +} + +X121Address ::= NumericString(SIZE (1..ub-x121-address)) + +-- String as defined by ITU-T Rec. X.121 +ub-x121-address INTEGER ::= 15 + +internationalISDNNumber ATTRIBUTE ::= { + WITH SYNTAX InternationalISDNNumber + EQUALITY MATCHING RULE numericStringMatch + SUBSTRINGS MATCHING RULE numericStringSubstringsMatch + ID id-at-internationalISDNNumber +} + +InternationalISDNNumber ::= + NumericString(SIZE (1..ub-international-isdn-number)) + +-- String complying with ITU-T Rec. E.164 only +ub-international-isdn-number INTEGER ::= + 16 + +collectiveInternationalISDNNumber ATTRIBUTE ::= { + SUBTYPE OF internationalISDNNumber + COLLECTIVE TRUE + ID id-at-collectiveInternationalISDNNumber +} + +registeredAddress ATTRIBUTE ::= { + SUBTYPE OF postalAddress + WITH SYNTAX PostalAddress + ID id-at-registeredAddress +} + +destinationIndicator ATTRIBUTE ::= { + WITH SYNTAX DestinationIndicator + EQUALITY MATCHING RULE caseIgnoreMatch + SUBSTRINGS MATCHING RULE caseIgnoreSubstringsMatch + ID id-at-destinationIndicator +} + +DestinationIndicator ::= PrintableString(SIZE (1..MAX)) + +-- alphabetical characters only +communicationsService ATTRIBUTE ::= { + WITH SYNTAX CommunicationsService + EQUALITY MATCHING RULE objectIdentifierMatch + ID id-at-communicationsService +} + +CommunicationsService ::= OBJECT IDENTIFIER + +communicationsNetwork ATTRIBUTE ::= { + WITH SYNTAX CommunicationsNetwork + EQUALITY MATCHING RULE objectIdentifierMatch + SINGLE VALUE TRUE + ID id-at-communicationsNetwork +} + +CommunicationsNetwork ::= OBJECT IDENTIFIER + +preferredDeliveryMethod ATTRIBUTE ::= { + WITH SYNTAX PreferredDeliveryMethod + SINGLE VALUE TRUE + ID id-at-preferredDeliveryMethod +} + +PreferredDeliveryMethod ::= + SEQUENCE OF + INTEGER {any-delivery-method(0), mhs-delivery(1), physical-delivery(2), + telex-delivery(3), teletex-delivery(4), g3-facsimile-delivery(5), + g4-facsimile-delivery(6), ia5-terminal-delivery(7), + videotex-delivery(8), telephone-delivery(9)} + +presentationAddress ATTRIBUTE ::= { + WITH SYNTAX PresentationAddress + EQUALITY MATCHING RULE presentationAddressMatch + SINGLE VALUE TRUE + ID id-at-presentationAddress +} + +PresentationAddress ::= SEQUENCE { + pSelector [0] OCTET STRING OPTIONAL, + sSelector [1] OCTET STRING OPTIONAL, + tSelector [2] OCTET STRING OPTIONAL, + nAddresses [3] SET SIZE (1..MAX) OF OCTET STRING +} + +supportedApplicationContext ATTRIBUTE ::= { + WITH SYNTAX OBJECT IDENTIFIER + EQUALITY MATCHING RULE objectIdentifierMatch + ID id-at-supportedApplicationContext +} + +protocolInformation ATTRIBUTE ::= { + WITH SYNTAX ProtocolInformation + EQUALITY MATCHING RULE protocolInformationMatch + ID id-at-protocolInformation +} + +ProtocolInformation ::= SEQUENCE { + nAddress OCTET STRING, + profiles SET OF OBJECT IDENTIFIER +} + +distinguishedName ATTRIBUTE ::= { + WITH SYNTAX DistinguishedName + EQUALITY MATCHING RULE distinguishedNameMatch + ID id-at-distinguishedName +} + +member ATTRIBUTE ::= {SUBTYPE OF distinguishedName + ID id-at-member +} + +uniqueMember ATTRIBUTE ::= { + WITH SYNTAX NameAndOptionalUID + EQUALITY MATCHING RULE uniqueMemberMatch + ID id-at-uniqueMember +} + +NameAndOptionalUID ::= SEQUENCE { + dn DistinguishedName, + uid UniqueIdentifier OPTIONAL +} + +owner ATTRIBUTE ::= {SUBTYPE OF distinguishedName + ID id-at-owner +} + +roleOccupant ATTRIBUTE ::= { + SUBTYPE OF distinguishedName + ID id-at-roleOccupant +} + +seeAlso ATTRIBUTE ::= {SUBTYPE OF distinguishedName + ID id-at-seeAlso +} + +dmdName ATTRIBUTE ::= { + SUBTYPE OF name + WITH SYNTAX UnboundedDirectoryString + ID id-at-dmdName +} + +-- Attributes for tag-based identification +tagOid ATTRIBUTE ::= { + WITH SYNTAX OBJECT IDENTIFIER + EQUALITY MATCHING RULE objectIdentifierMatch + SINGLE VALUE TRUE + ID id-at-tagOid +} + +uiiFormat ATTRIBUTE ::= { + WITH SYNTAX UnboundedDirectoryString + SINGLE VALUE TRUE + ID id-at-uiiFormat +} + +uiiInUrn ATTRIBUTE ::= { + WITH SYNTAX UTF8String + EQUALITY MATCHING RULE caseExactMatch + SINGLE VALUE TRUE + ID id-at-uiiInUrn +} + +contentUri ATTRIBUTE ::= { + WITH SYNTAX UnboundedDirectoryString + ID id-at-contentUri +} + +-- Notification attributes +dSAProblem ATTRIBUTE ::= { + WITH SYNTAX OBJECT IDENTIFIER + EQUALITY MATCHING RULE objectIdentifierMatch + ID id-not-dSAProblem +} + +searchServiceProblem ATTRIBUTE ::= { + WITH SYNTAX OBJECT IDENTIFIER + EQUALITY MATCHING RULE objectIdentifierMatch + SINGLE VALUE TRUE + ID id-not-searchServiceProblem +} + +serviceType ATTRIBUTE ::= { + WITH SYNTAX OBJECT IDENTIFIER + EQUALITY MATCHING RULE objectIdentifierMatch + SINGLE VALUE TRUE + ID id-not-serviceType +} + +attributeTypeList ATTRIBUTE ::= { + WITH SYNTAX OBJECT IDENTIFIER + EQUALITY MATCHING RULE objectIdentifierMatch + ID id-not-attributeTypeList +} + +matchingRuleList ATTRIBUTE ::= { + WITH SYNTAX OBJECT IDENTIFIER + EQUALITY MATCHING RULE objectIdentifierMatch + ID id-not-matchingRuleList +} + +filterItem ATTRIBUTE ::= { + WITH SYNTAX FilterItem + ID id-not-filterItem +} + +attributeCombinations ATTRIBUTE ::= { + WITH SYNTAX AttributeCombination + ID id-not-attributeCombinations +} + +contextTypeList ATTRIBUTE ::= { + WITH SYNTAX OBJECT IDENTIFIER + EQUALITY MATCHING RULE objectIdentifierMatch + ID id-not-contextTypeList +} + +contextList ATTRIBUTE ::= { + WITH SYNTAX ContextAssertion + ID id-not-contextList +} + +contextCombinations ATTRIBUTE ::= { + WITH SYNTAX ContextCombination + ID id-not-contextCombinations +} + +hierarchySelectList ATTRIBUTE ::= { + WITH SYNTAX HierarchySelections + SINGLE VALUE TRUE + ID id-not-hierarchySelectList +} + +searchControlOptionsList ATTRIBUTE ::= { + WITH SYNTAX SearchControlOptions + SINGLE VALUE TRUE + ID id-not-searchControlOptionsList +} + +serviceControlOptionsList ATTRIBUTE ::= { + WITH SYNTAX ServiceControlOptions + SINGLE VALUE TRUE + ID id-not-serviceControlOptionsList +} + +multipleMatchingLocalities ATTRIBUTE ::= { + WITH SYNTAX MultipleMatchingLocalities + ID id-not-multipleMatchingLocalities +} + +MultipleMatchingLocalities ::= SEQUENCE { + matchingRuleUsed MATCHING-RULE.&id OPTIONAL, + attributeList SEQUENCE OF AttributeValueAssertion +} + +proposedRelaxation ATTRIBUTE ::= { + WITH SYNTAX MRMappings + ID id-not-proposedRelaxation +} + +MRMappings ::= SEQUENCE OF MRMapping + +appliedRelaxation ATTRIBUTE ::= { + WITH SYNTAX OBJECT IDENTIFIER + EQUALITY MATCHING RULE objectIdentifierMatch + ID id-not-appliedRelaxation +} + +-- Matching rules +caseExactMatch MATCHING-RULE ::= { + SYNTAX UnboundedDirectoryString + ID id-mr-caseExactMatch +} + +caseIgnoreMatch MATCHING-RULE ::= { + SYNTAX UnboundedDirectoryString + ID id-mr-caseIgnoreMatch +} + +caseExactOrderingMatch MATCHING-RULE ::= { + SYNTAX UnboundedDirectoryString + ID id-mr-caseExactOrderingMatch +} + +caseIgnoreOrderingMatch MATCHING-RULE ::= { + SYNTAX UnboundedDirectoryString + ID id-mr-caseIgnoreOrderingMatch +} + +caseExactSubstringsMatch MATCHING-RULE ::= { + SYNTAX SubstringAssertion -- only the PrintableString choice + ID id-mr-caseExactSubstringsMatch +} + +caseIgnoreSubstringsMatch MATCHING-RULE ::= { + SYNTAX SubstringAssertion + ID id-mr-caseIgnoreSubstringsMatch +} + +SubstringAssertion ::= + SEQUENCE OF + CHOICE {initial [0] UnboundedDirectoryString, + any [1] UnboundedDirectoryString, + final [2] UnboundedDirectoryString, + control Attribute{{SupportedAttributes}} + } -- Used to specify interpretation of the following items + +-- at most one initial and one final component +numericStringMatch MATCHING-RULE ::= { + SYNTAX NumericString + ID id-mr-numericStringMatch +} + +numericStringOrderingMatch MATCHING-RULE ::= { + SYNTAX NumericString + ID id-mr-numericStringOrderingMatch +} + +numericStringSubstringsMatch MATCHING-RULE ::= { + SYNTAX SubstringAssertion + ID id-mr-numericStringSubstringsMatch +} + +caseIgnoreListMatch MATCHING-RULE ::= { + SYNTAX CaseIgnoreList + ID id-mr-caseIgnoreListMatch +} + +CaseIgnoreList ::= SEQUENCE OF UnboundedDirectoryString + +caseIgnoreListSubstringsMatch MATCHING-RULE ::= { + SYNTAX SubstringAssertion + ID id-mr-caseIgnoreListSubstringsMatch +} + +storedPrefixMatch MATCHING-RULE ::= { + SYNTAX UnboundedDirectoryString + ID id-mr-storedPrefixMatch +} + +booleanMatch MATCHING-RULE ::= {SYNTAX BOOLEAN + ID id-mr-booleanMatch +} + +integerMatch MATCHING-RULE ::= {SYNTAX INTEGER + ID id-mr-integerMatch +} + +integerOrderingMatch MATCHING-RULE ::= { + SYNTAX INTEGER + ID id-mr-integerOrderingMatch +} + +bitStringMatch MATCHING-RULE ::= { + SYNTAX BIT STRING + ID id-mr-bitStringMatch +} + +octetStringMatch MATCHING-RULE ::= { + SYNTAX OCTET STRING + ID id-mr-octetStringMatch +} + +octetStringOrderingMatch MATCHING-RULE ::= { + SYNTAX OCTET STRING + ID id-mr-octetStringOrderingMatch +} + +octetStringSubstringsMatch MATCHING-RULE ::= { + SYNTAX OctetSubstringAssertion + ID id-mr-octetStringSubstringsMatch +} + +OctetSubstringAssertion ::= + SEQUENCE OF + CHOICE {initial [0] OCTET STRING, + any [1] OCTET STRING, + final [2] OCTET STRING} + +-- at most one initial and one final component +telephoneNumberMatch MATCHING-RULE ::= { + SYNTAX TelephoneNumber + ID id-mr-telephoneNumberMatch +} + +telephoneNumberSubstringsMatch MATCHING-RULE ::= { + SYNTAX SubstringAssertion + ID id-mr-telephoneNumberSubstringsMatch +} + +presentationAddressMatch MATCHING-RULE ::= { + SYNTAX PresentationAddress + ID id-mr-presentationAddressMatch +} + +uniqueMemberMatch MATCHING-RULE ::= { + SYNTAX NameAndOptionalUID + ID id-mr-uniqueMemberMatch +} + +protocolInformationMatch MATCHING-RULE ::= { + SYNTAX OCTET STRING + ID id-mr-protocolInformationMatch +} + +facsimileNumberMatch MATCHING-RULE ::= { + SYNTAX TelephoneNumber + ID id-mr-facsimileNumberMatch +} + +facsimileNumberSubstringsMatch MATCHING-RULE ::= { + SYNTAX SubstringAssertion + ID id-mr-facsimileNumberSubstringsMatch +} + +uUIDPairMatch MATCHING-RULE ::= {SYNTAX UUIDPair + ID id-mr-uuidpairmatch +} + +uTCTimeMatch MATCHING-RULE ::= {SYNTAX UTCTime + ID id-mr-uTCTimeMatch +} + +uTCTimeOrderingMatch MATCHING-RULE ::= { + SYNTAX UTCTime + ID id-mr-uTCTimeOrderingMatch +} + +generalizedTimeMatch MATCHING-RULE ::= { + SYNTAX GeneralizedTime + -- as per 46.3 b) or c) of ITU-T Rec. X.680 | ISO/IEC 8824-1 + ID id-mr-generalizedTimeMatch +} + +generalizedTimeOrderingMatch MATCHING-RULE ::= { + SYNTAX GeneralizedTime + -- as per 46.3 b) or c) of ITU-T Rec. X.680 | ISO/IEC 8824-1 + ID id-mr-generalizedTimeOrderingMatch +} + +systemProposedMatch MATCHING-RULE ::= {ID id-mr-systemProposedMatch +} + +integerFirstComponentMatch MATCHING-RULE ::= { + SYNTAX INTEGER + ID id-mr-integerFirstComponentMatch +} + +objectIdentifierFirstComponentMatch MATCHING-RULE ::= { + SYNTAX OBJECT IDENTIFIER + ID id-mr-objectIdentifierFirstComponentMatch +} + +directoryStringFirstComponentMatch MATCHING-RULE ::= { + SYNTAX UnboundedDirectoryString + ID id-mr-directoryStringFirstComponentMatch +} + +wordMatch MATCHING-RULE ::= { + SYNTAX UnboundedDirectoryString + ID id-mr-wordMatch +} + +keywordMatch MATCHING-RULE ::= { + SYNTAX UnboundedDirectoryString + ID id-mr-keywordMatch +} + +generalWordMatch MATCHING-RULE ::= { + SYNTAX SubstringAssertion + ID id-mr-generalWordMatch +} + +sequenceMatchType ATTRIBUTE ::= { + WITH SYNTAX SequenceMatchType + SINGLE VALUE TRUE + ID id-cat-sequenceMatchType +} -- defaulting to sequenceExact + +SequenceMatchType ::= ENUMERATED { + sequenceExact(0), sequenceDeletion(1), sequenceRestrictedDeletion(2), + sequencePermutation(3), sequencePermutationAndDeletion(4), + sequenceProviderDefined(5)} + +wordMatchTypes ATTRIBUTE ::= { + WITH SYNTAX WordMatchTypes + SINGLE VALUE TRUE + ID id-cat-wordMatchType +} -- defaulting to wordExact + +WordMatchTypes ::= ENUMERATED { + wordExact(0), wordTruncated(1), wordPhonetic(2), wordProviderDefined(3) +} + +characterMatchTypes ATTRIBUTE ::= { + WITH SYNTAX CharacterMatchTypes + SINGLE VALUE TRUE + ID id-cat-characterMatchTypes +} + +CharacterMatchTypes ::= ENUMERATED { + characterExact(0), characterCaseIgnore(1), characterMapped(2)} + +selectedContexts ATTRIBUTE ::= { + WITH SYNTAX ContextAssertion + ID id-cat-selectedContexts +} + +approximateStringMatch MATCHING-RULE ::= {ID id-mr-approximateStringMatch +} + +ignoreIfAbsentMatch MATCHING-RULE ::= {ID id-mr-ignoreIfAbsentMatch +} + +nullMatch MATCHING-RULE ::= {ID id-mr-nullMatch +} + +ZONAL-MATCHING ::= + MAPPING-BASED-MATCHING{ZonalSelect, TRUE, ZonalResult, zonalMatch.&id} + +ZonalSelect ::= SEQUENCE OF AttributeType + +ZonalResult ::= ENUMERATED { + cannot-select-mapping(0), zero-mappings(2), multiple-mappings(3)} + +zonalMatch MATCHING-RULE ::= { + UNIQUE-MATCH-INDICATOR multipleMatchingLocalities + ID id-mr-zonalMatch +} + +-- Contexts +languageContext CONTEXT ::= { + WITH SYNTAX LanguageContextSyntax + ID id-avc-language +} + +LanguageContextSyntax ::= PrintableString(SIZE (2..3)) -- ISO 639-2 codes only + + +temporalContext CONTEXT ::= { + WITH SYNTAX TimeSpecification + ASSERTED AS TimeAssertion + ID id-avc-temporal +} + +TimeSpecification ::= SEQUENCE { + time + CHOICE {absolute + SEQUENCE {startTime [0] GeneralizedTime OPTIONAL, + endTime [1] GeneralizedTime OPTIONAL}, + periodic SET SIZE (1..MAX) OF Period}, + notThisTime BOOLEAN DEFAULT FALSE, + timeZone TimeZone OPTIONAL +} + +Period ::= SEQUENCE { + timesOfDay [0] SET SIZE (1..MAX) OF DayTimeBand OPTIONAL, + days + [1] CHOICE {intDay SET OF INTEGER, + bitDay + BIT STRING {sunday(0), monday(1), tuesday(2), wednesday(3), + thursday(4), friday(5), saturday(6)}, + dayOf XDayOf} OPTIONAL, + weeks + [2] CHOICE {allWeeks NULL, + intWeek SET OF INTEGER, + bitWeek + BIT STRING {week1(0), week2(1), week3(2), week4(3), week5(4)} + } OPTIONAL, + months + [3] CHOICE {allMonths NULL, + intMonth SET OF INTEGER, + bitMonth + BIT STRING {january(0), february(1), march(2), april(3), + may(4), june(5), july(6), august(7), + september(8), october(9), november(10), + december(11)}} OPTIONAL, + years [4] SET OF INTEGER(1000..MAX) OPTIONAL +} + +XDayOf ::= CHOICE { + first [1] NamedDay, + second [2] NamedDay, + third [3] NamedDay, + fourth [4] NamedDay, + fifth [5] NamedDay +} + +NamedDay ::= CHOICE { + intNamedDays + ENUMERATED {sunday(1), monday(2), tuesday(3), wednesday(4), thursday(5), + friday(6), saturday(7)}, + bitNamedDays + BIT STRING {sunday(0), monday(1), tuesday(2), wednesday(3), thursday(4), + friday(5), saturday(6)} +} + +DayTimeBand ::= SEQUENCE { + startDayTime [0] DayTime DEFAULT {hour 0}, + endDayTime [1] DayTime DEFAULT {hour 23, minute 59, second 59} +} + +DayTime ::= SEQUENCE { + hour [0] INTEGER(0..23), + minute [1] INTEGER(0..59) DEFAULT 0, + second [2] INTEGER(0..59) DEFAULT 0 +} + +TimeZone ::= INTEGER(-12..12) + +TimeAssertion ::= CHOICE { + now NULL, + at GeneralizedTime, + between + SEQUENCE {startTime [0] GeneralizedTime, + endTime [1] GeneralizedTime OPTIONAL, + entirely BOOLEAN DEFAULT FALSE} +} + +localeContext CONTEXT ::= { + WITH SYNTAX LocaleContextSyntax + ID id-avc-locale +} + +LocaleContextSyntax ::= CHOICE { + localeID1 OBJECT IDENTIFIER, + localeID2 UnboundedDirectoryString +} + +ldapAttributeOptionContext CONTEXT ::= { + WITH SYNTAX AttributeOptionList + ASSERTED AS AttributeOptionList + ABSENT-MATCH FALSE + ID id-avc-ldapAttributeOption +} + +AttributeOptionList ::= SEQUENCE OF UTF8String + +-- Object identifier assignments +-- object identifiers assigned in other modules are shown in comments +-- Attributes +-- id-at-objectClass OBJECT IDENTIFIER ::= {id-at 0} +-- id-at-aliasedEntryName OBJECT IDENTIFIER ::= {id-at 1} +-- id-at-encryptedAliasedEntryName OBJECT IDENTIFIER ::= {id-at 1 2} +id-at-knowledgeInformation OBJECT IDENTIFIER ::= + {id-at 2} + +id-at-commonName OBJECT IDENTIFIER ::= {id-at 3} + +-- id-at-encryptedCommonName OBJECT IDENTIFIER ::= {id-at 3 2} +id-at-surname OBJECT IDENTIFIER ::= + {id-at 4} + +-- id-at-encryptedSurname OBJECT IDENTIFIER ::= {id-at 4 2} +id-at-serialNumber OBJECT IDENTIFIER ::= + {id-at 5} + +-- id-at-encryptedSerialNumbe r OBJECT IDENTIFIER ::= {id-at 5 2} +id-at-countryName OBJECT IDENTIFIER ::= + {id-at 6} + +-- id-at-encryptedCountryName OBJECT IDENTIFIER ::= {id-at 6 2} +id-at-localityName OBJECT IDENTIFIER ::= + {id-at 7} + +-- id-at-encryptedLocalityName OBJECT IDENTIFIER ::= {id-at 7 2} +id-at-collectiveLocalityName OBJECT IDENTIFIER ::= + {id-at 7 1} + +-- id-at-encryptedCollectiveLocalityName OBJECT IDENTIFIER ::= {id-at 7 1 2} +id-at-stateOrProvinceName OBJECT IDENTIFIER ::= + {id-at 8} + +-- id-at-encryptedStateOrProvinceName OBJECT IDENTIFIER ::= {id-at 8 2} +id-at-collectiveStateOrProvinceName OBJECT IDENTIFIER ::= + {id-at 8 1} + +-- id-at-encryptedCollectiveStateOrProvinceName OBJECT IDENTIFIER ::= {id-at 8 1 2} +id-at-streetAddress OBJECT IDENTIFIER ::= + {id-at 9} + +-- id-at-encryptedStreetAddress OBJECT IDENTIFIER ::= {id-at 9 2} +id-at-collectiveStreetAddress OBJECT IDENTIFIER ::= + {id-at 9 1} + +-- id-at-encryptedCollectiveStreetAddress OBJECT IDENTIFIER ::= {id-at 9 1 2} +id-at-organizationName OBJECT IDENTIFIER ::= + {id-at 10} + +-- id-at-encryptedOrganizationName OBJECT IDENTIFIER ::= {id-at 10 2} +id-at-collectiveOrganizationName OBJECT IDENTIFIER ::= + {id-at 10 1} + +-- id-at-encryptedCollectiveOrganizationName OBJECT IDENTIFIER ::= {id-at 10 1 2} +id-at-organizationalUnitName OBJECT IDENTIFIER ::= + {id-at 11} + +-- id-at-encryptedOrganizationalUnitName OBJECT IDENTIFIER ::= {id-at 11 2} +id-at-collectiveOrganizationalUnitName OBJECT IDENTIFIER ::= + {id-at 11 1} + +-- id-at-encryptedCollectiveOrganizationalUnitNam OBJECT IDENTIFIER ::= {id-at 11 1 2} +id-at-title OBJECT IDENTIFIER ::= + {id-at 12} + +-- id-at-encryptedTitle OBJECT IDENTIFIER ::= {id-at 12 2} +id-at-description OBJECT IDENTIFIER ::= + {id-at 13} + +-- id-at-encryptedDescription OBJECT IDENTIFIER ::= {id-at 13 2} +id-at-searchGuide OBJECT IDENTIFIER ::= + {id-at 14} + +-- id-at-encryptedSearchGuide OBJECT IDENTIFIER ::= {id-at 14 2} +id-at-businessCategory OBJECT IDENTIFIER ::= + {id-at 15} + +-- id-at-encryptedBusinessCategory OBJECT IDENTIFIER ::= {id-at 15 2} +id-at-postalAddress OBJECT IDENTIFIER ::= + {id-at 16} + +-- id-at-encryptedPostalAddress OBJECT IDENTIFIER ::= {id-at 16 2} +id-at-collectivePostalAddress OBJECT IDENTIFIER ::= + {id-at 16 1} + +-- id-at-encryptedCollectivePostalAddress OBJECT IDENTIFIER ::= {id-at 16 1 2} +id-at-postalCode OBJECT IDENTIFIER ::= + {id-at 17} + +-- id-at-encryptedPostalCode OBJECT IDENTIFIER ::= {id-at 17 2} +id-at-collectivePostalCode OBJECT IDENTIFIER ::= + {id-at 17 1} + +-- id-at-encryptedCollectivePostalCode OBJECT IDENTIFIER ::= {id-at 17 1 2} +id-at-postOfficeBox OBJECT IDENTIFIER ::= + {id-at 18} + +id-at-collectivePostOfficeBox OBJECT IDENTIFIER ::= {id-at 18 1} + +-- id-at-encryptedPostOfficeBox OBJECT IDENTIFIER ::= {id-at 18 2} +-- id-at-encryptedCollectivePostOfficeBox OBJECT IDENTIFIER ::= {id-at 18 1 2} +id-at-physicalDeliveryOfficeName OBJECT IDENTIFIER ::= + {id-at 19} + +id-at-collectivePhysicalDeliveryOfficeName OBJECT IDENTIFIER ::= {id-at 19 1} + +-- id-at-encryptedPhysicalDeliveryOfficeName OBJECT IDENTIFIER ::= {id-at 19 2} +-- id-at-encryptedCollectivePhysicalDeliveryOfficeName OBJECT IDENTIFIER ::= {id-at 19 1 2} +id-at-telephoneNumber OBJECT IDENTIFIER ::= + {id-at 20} + +-- id-at-encryptedTelephoneNumber OBJECT IDENTIFIER ::= {id-at 20 2} +id-at-collectiveTelephoneNumber OBJECT IDENTIFIER ::= + {id-at 20 1} + +-- id-at-encryptedCollectiveTelephoneNumber OBJECT IDENTIFIER ::= {id-at 20 1 2} +id-at-telexNumber OBJECT IDENTIFIER ::= + {id-at 21} + +-- id-at-encryptedTelexNumber OBJECT IDENTIFIER ::= {id-at 21 2} +id-at-collectiveTelexNumber OBJECT IDENTIFIER ::= + {id-at 21 1} + +-- id-at-encryptedCollectiveTelexNumber OBJECT IDENTIFIER ::= {id-at 21 1 2} +-- id-at-teletexTerminalIdentifier OBJECT IDENTIFIER ::= {id-at 22} +-- id-at-encryptedTeletexTerminalIdentifier OBJECT IDENTIFIER ::= {id-at 22 2} +-- id-at-collectiveTeletexTerminalIdentifier OBJECT IDENTIFIER ::= {id-at 22 1} +-- id-at-encryptedCollectiveTeletexTerminalIdentifier OBJECT IDENTIFIER ::= {id-at 22 1 2} +id-at-facsimileTelephoneNumber OBJECT IDENTIFIER ::= + {id-at 23} + +-- id-at-encryptedFacsimileTelephoneNumber OBJECT IDENTIFIER ::= {id-at 23 2} +id-at-collectiveFacsimileTelephoneNumber OBJECT IDENTIFIER ::= + {id-at 23 1} + +-- id-at-encryptedCollectiveFacsimileTelephoneNumber OBJECT IDENTIFIER ::= {id-at 23 1 2} +id-at-x121Address OBJECT IDENTIFIER ::= + {id-at 24} + +-- id-at-encryptedX121Address OBJECT IDENTIFIER ::= {id-at 24 2} +id-at-internationalISDNNumber OBJECT IDENTIFIER ::= + {id-at 25} + +-- id-at-encryptedInternationalISDNNumber OBJECT IDENTIFIER ::= {id-at 25 2} +id-at-collectiveInternationalISDNNumber OBJECT IDENTIFIER ::= + {id-at 25 1} + +-- id-at-encryptedCollectiveInternationalISDNNumber OBJECT IDENTIFIER ::= {id-at 25 1 2} +id-at-registeredAddress OBJECT IDENTIFIER ::= + {id-at 26} + +-- id-at-encryptedRegisteredAddress OBJECT IDENTIFIER ::= {id-at 26 2} +id-at-destinationIndicator OBJECT IDENTIFIER ::= + {id-at 27} + +-- id-at-encryptedDestinationIndicator OBJECT IDENTIFIER ::= {id-at 27 2} +id-at-preferredDeliveryMethod OBJECT IDENTIFIER ::= + {id-at 28} + +-- id-at-encryptedPreferredDeliveryMethod OBJECT IDENTIFIER ::= {id-at 28 2} +id-at-presentationAddress OBJECT IDENTIFIER ::= + {id-at 29} + +-- id-at-encryptedPresentationAddress OBJECT IDENTIFIER ::= {id-at 29 2} +id-at-supportedApplicationContext OBJECT IDENTIFIER ::= + {id-at 30} + +-- id-at-encryptedSupportedApplicationContext OBJECT IDENTIFIER ::= {id-at 30 2} +id-at-member OBJECT IDENTIFIER ::= + {id-at 31} + +-- id-at-encryptedMember OBJECT IDENTIFIER ::= {id-at 31 2} +id-at-owner OBJECT IDENTIFIER ::= + {id-at 32} + +-- id-at-encryptedOwner OBJECT IDENTIFIER ::= {id-at 32 2} +id-at-roleOccupant OBJECT IDENTIFIER ::= + {id-at 33} + +-- id-at-encryptedRoleOccupant OBJECT IDENTIFIER ::= {id-at 33 2} +id-at-seeAlso OBJECT IDENTIFIER ::= + {id-at 34} + +-- id-at-encryptedSeeAlso OBJECT IDENTIFIER ::= {id-at 34 2} +-- id-at-userPassword OBJECT IDENTIFIER ::= {id-at 35} X.509|Part8 +-- id-at-encryptedUserPassword OBJECT IDENTIFIER ::= {id-at 35 2} +-- id-at-userCertificate OBJECT IDENTIFIER ::= {id-at 36} X.509|Part8 +-- id-at-encryptedUserCertificate OBJECT IDENTIFIER ::= {id-at 36 2} +-- id-at-cACertificate OBJECT IDENTIFIER ::= {id-at 37} X.509|Part8 +-- id-at-encryptedCACertificate OBJECT IDENTIFIER ::= {id-at 37 2} +-- id-at-authorityRevocationList OBJECT IDENTIFIER ::= {id-at 38} X.509|Part8 +-- id-at-encryptedAuthorityRevocationList OBJECT IDENTIFIER ::= {id-at 38 2} +-- id-at-certificateRevocationList OBJECT IDENTIFIER ::= {id-at 39} X.509|Part8 +-- id-at-encryptedCertificateRevocationList OBJECT IDENTIFIER ::= {id-at 39 2} +-- id-at-crossCertificatePair OBJECT IDENTIFIER ::= {id-at 40} X.509|Part8 +-- id-at-encryptedCrossCertificatePair OBJECT IDENTIFIER ::= {id-at 40 2} +id-at-name OBJECT IDENTIFIER ::= + {id-at 41} + +id-at-givenName OBJECT IDENTIFIER ::= {id-at 42} + +-- id-at-encryptedGivenName OBJECT IDENTIFIER ::= {id-at 42 2} +id-at-initials OBJECT IDENTIFIER ::= + {id-at 43} + +-- id-at-encryptedInitials OBJECT IDENTIFIER ::= {id-at 43 2} +id-at-generationQualifier OBJECT IDENTIFIER ::= + {id-at 44} + +-- id-at-encryptedGenerationQualifier OBJECT IDENTIFIER ::= {id-at 44 2} +id-at-uniqueIdentifier OBJECT IDENTIFIER ::= + {id-at 45} + +-- id-at-encryptedUniqueIdentifier OBJECT IDENTIFIER ::= {id-at 45 2} +id-at-dnQualifier OBJECT IDENTIFIER ::= + {id-at 46} + +-- id-at-encryptedDnQualifier OBJECT IDENTIFIER ::= {id-at 46 2} +id-at-enhancedSearchGuide OBJECT IDENTIFIER ::= + {id-at 47} + +-- id-at-encryptedEnhancedSearchGuide OBJECT IDENTIFIER ::= {id-at 47 2} +id-at-protocolInformation OBJECT IDENTIFIER ::= + {id-at 48} + +-- id-at-encryptedProtocolInformation OBJECT IDENTIFIER ::= {id-at 48 2} +id-at-distinguishedName OBJECT IDENTIFIER ::= + {id-at 49} + +-- id-at-encryptedDistinguishedName OBJECT IDENTIFIER ::= {id-at 49 2} +id-at-uniqueMember OBJECT IDENTIFIER ::= + {id-at 50} + +-- id-at-encryptedUniqueMember OBJECT IDENTIFIER ::= {id-at 50 2} +id-at-houseIdentifier OBJECT IDENTIFIER ::= + {id-at 51} + +-- id-at-encryptedHouseIdentifier OBJECT IDENTIFIER ::= {id-at 51 2} +-- id-at-supportedAlgorithms OBJECT IDENTIFIER ::= {id-at 52} X.509|Part8 +-- id-at-encryptedSupportedAlgorithms OBJECT IDENTIFIER ::= {id-at 52 2} +-- id-at-deltaRevocationList OBJECT IDENTIFIER ::= {id-at 53} X.509|Part8 +-- id-at-encryptedDeltaRevocationList OBJECT IDENTIFIER ::= {id-at 53 2} +id-at-dmdName OBJECT IDENTIFIER ::= + {id-at 54} + +-- id-at-encryptedDmdName OBJECT IDENTIFIER ::= {id-at 54 2} +-- id-at-clearance OBJECT IDENTIFIER ::= {id-at 55} +-- id-at-encryptedClearance OBJECT IDENTIFIER ::= {id-at 55 2} +-- id-at-defaultDirQop OBJECT IDENTIFIER ::= {id-at 56} +-- id-at-encryptedDefaultDirQop OBJECT IDENTIFIER ::= {id-at 56 2} +-- id-at-attributeIntegrityInfo OBJECT IDENTIFIER ::= {id-at 57} +-- id-at-encryptedAttributeIntegrityInfo OBJECT IDENTIFIER ::= {id-at 57 2} +-- id-at-attributeCertificate OBJECT IDENTIFIER ::= {id-at 58} X.509|Part8 +-- id-at-encryptedAttributeCertificate OBJECT IDENTIFIER ::= {id-at 58 2} +-- id-at-attributeCertificateRevocationList OBJECT IDENTIFIER ::= {id-at 59} X.509|Part8 +-- id-at-encryptedAttributeCertificateRevocationList OBJECT IDENTIFIER ::= {id-at 59 2} +-- id-at-confKeyInfo OBJECT IDENTIFIER ::= {id-at 60} +-- id-at-encryptedConfKeyInfo OBJECT IDENTIFIER ::= {id-at 60 2} +-- id-at-aACertificate OBJECT IDENTIFIER ::= {id-at 61} X.509|Part8 +-- id-at-attributeDescriptorCertificate OBJECT IDENTIFIER ::= {id-at 62} X.509|Part8 +-- id-at-attributeAuthorityRevocationList OBJECT IDENTIFIER ::= {id-at 63} X.509|Part8 +-- id-at-family-information OBJECT IDENTIFIER ::= {id-at 64} +id-at-pseudonym OBJECT IDENTIFIER ::= + {id-at 65} + +id-at-communicationsService OBJECT IDENTIFIER ::= {id-at 66} + +id-at-communicationsNetwork OBJECT IDENTIFIER ::= {id-at 67} + +-- id-at-certificationPracticeStmt OBJECT IDENTIFIER ::= {id-at 68} X.509|Part8 +-- id-at-certificatePolicy OBJECT IDENTIFIER ::= {id-at 69} X.509|Part8 +-- id-at-pkiPath OBJECT IDENTIFIER ::= {id-at 70} X.509|Part8 +-- id-at-privPolicy OBJECT IDENTIFIER ::= {id-at 71} X.509|Part8 +-- id-at-role OBJECT IDENTIFIER ::= {id-at 72} X.509|Part8 +-- id-at-delegationPath OBJECT IDENTIFIER ::= {id-at 73} X.509|Part8 +-- id-at-protPrivPolicy OBJECT IDENTIFIER ::= {id-at 74} X.509|Part8 +-- id-at-xMLPrivilegeInfo OBJECT IDENTIFIER ::= {id-at 75} X.509|Part8 +-- id-at-xmlPrivPolicy OBJECT IDENTIFIER ::= {id-at 76} X.509|Part8 +id-at-uuidpair OBJECT IDENTIFIER ::= + {id-at 77} + +id-at-tagOid OBJECT IDENTIFIER ::= {id-at 78} + +id-at-uiiFormat OBJECT IDENTIFIER ::= {id-at 79} + +id-at-uiiInUrn OBJECT IDENTIFIER ::= {id-at 80} + +id-at-contentUri OBJECT IDENTIFIER ::= {id-at 81} + +-- id-at-permission OBJECT IDENTIFIER ::= {id-at 82} X.509|Part8 +-- Control attributes +id-cat-sequenceMatchType OBJECT IDENTIFIER ::= + {id-cat 1} + +id-cat-wordMatchType OBJECT IDENTIFIER ::= {id-cat 2} + +id-cat-characterMatchTypes OBJECT IDENTIFIER ::= {id-cat 3} + +id-cat-selectedContexts OBJECT IDENTIFIER ::= {id-cat 4} + +-- Notification attributes +id-not-dSAProblem OBJECT IDENTIFIER ::= {id-not 0} + +id-not-searchServiceProblem OBJECT IDENTIFIER ::= {id-not 1} + +id-not-serviceType OBJECT IDENTIFIER ::= {id-not 2} + +id-not-attributeTypeList OBJECT IDENTIFIER ::= {id-not 3} + +id-not-matchingRuleList OBJECT IDENTIFIER ::= {id-not 4} + +id-not-filterItem OBJECT IDENTIFIER ::= {id-not 5} + +id-not-attributeCombinations OBJECT IDENTIFIER ::= {id-not 6} + +id-not-contextTypeList OBJECT IDENTIFIER ::= {id-not 7} + +id-not-contextList OBJECT IDENTIFIER ::= {id-not 8} + +id-not-contextCombinations OBJECT IDENTIFIER ::= {id-not 9} + +id-not-hierarchySelectList OBJECT IDENTIFIER ::= {id-not 10} + +id-not-searchControlOptionsList OBJECT IDENTIFIER ::= {id-not 11} + +id-not-serviceControlOptionsList OBJECT IDENTIFIER ::= {id-not 12} + +id-not-multipleMatchingLocalities OBJECT IDENTIFIER ::= {id-not 13} + +id-not-proposedRelaxation OBJECT IDENTIFIER ::= {id-not 14} + +id-not-appliedRelaxation OBJECT IDENTIFIER ::= {id-not 15} + +-- Problem definitions +id-pr-targetDsaUnavailable OBJECT IDENTIFIER ::= + {id-pr 1} + +id-pr-dataSourceUnavailable OBJECT IDENTIFIER ::= {id-pr 2} + +id-pr-unidentifiedOperation OBJECT IDENTIFIER ::= {id-pr 3} + +id-pr-unavailableOperation OBJECT IDENTIFIER ::= {id-pr 4} + +id-pr-searchAttributeViolation OBJECT IDENTIFIER ::= {id-pr 5} + +id-pr-searchAttributeCombinationViolation OBJECT IDENTIFIER ::= {id-pr 6} + +id-pr-searchValueNotAllowed OBJECT IDENTIFIER ::= {id-pr 7} + +id-pr-missingSearchAttribute OBJECT IDENTIFIER ::= {id-pr 8} + +id-pr-searchValueViolation OBJECT IDENTIFIER ::= {id-pr 9} + +id-pr-attributeNegationViolation OBJECT IDENTIFIER ::= {id-pr 10} + +id-pr-searchValueRequired OBJECT IDENTIFIER ::= {id-pr 11} + +id-pr-invalidSearchValue OBJECT IDENTIFIER ::= {id-pr 12} + +id-pr-searchContextViolation OBJECT IDENTIFIER ::= {id-pr 13} + +id-pr-searchContextCombinationViolation OBJECT IDENTIFIER ::= {id-pr 14} + +id-pr-missingSearchContext OBJECT IDENTIFIER ::= {id-pr 15} + +id-pr-searchContextValueViolation OBJECT IDENTIFIER ::= {id-pr 16} + +id-pr-searchContextValueRequired OBJECT IDENTIFIER ::= {id-pr 17} + +id-pr-invalidContextSearchValue OBJECT IDENTIFIER ::= {id-pr 18} + +id-pr-unsupportedMatchingRule OBJECT IDENTIFIER ::= {id-pr 19} + +id-pr-attributeMatchingViolation OBJECT IDENTIFIER ::= {id-pr 20} + +id-pr-unsupportedMatchingUse OBJECT IDENTIFIER ::= {id-pr 21} + +id-pr-matchingUseViolation OBJECT IDENTIFIER ::= {id-pr 22} + +id-pr-hierarchySelectForbidden OBJECT IDENTIFIER ::= {id-pr 23} + +id-pr-invalidHierarchySelect OBJECT IDENTIFIER ::= {id-pr 24} + +id-pr-unavailableHierarchySelect OBJECT IDENTIFIER ::= {id-pr 25} + +id-pr-invalidSearchControlOptions OBJECT IDENTIFIER ::= {id-pr 26} + +id-pr-invalidServiceControlOptions OBJECT IDENTIFIER ::= {id-pr 27} + +id-pr-searchSubsetViolation OBJECT IDENTIFIER ::= {id-pr 28} + +id-pr-unmatchedKeyAttributes OBJECT IDENTIFIER ::= {id-pr 29} + +id-pr-ambiguousKeyAttributes OBJECT IDENTIFIER ::= {id-pr 30} + +id-pr-unavailableRelaxationLevel OBJECT IDENTIFIER ::= {id-pr 31} + +id-pr-emptyHierarchySelection OBJECT IDENTIFIER ::= {id-pr 32} + +id-pr-administratorImposedLimit OBJECT IDENTIFIER ::= {id-pr 33} + +id-pr-permanentRestriction OBJECT IDENTIFIER ::= {id-pr 34} + +id-pr-temporaryRestriction OBJECT IDENTIFIER ::= {id-pr 35} + +id-pr-relaxationNotSupported OBJECT IDENTIFIER ::= {id-pr 36} + +-- Matching rules +-- id-mr-objectIdentifierMatch OBJECT IDENTIFIER ::= {id-mr 0} X.501|Part2 +-- id-mr-distinguishedNameMatch OBJECT IDENTIFIER ::= {id-mr 1} X.501|Part2 +id-mr-caseIgnoreMatch OBJECT IDENTIFIER ::= + {id-mr 2} + +id-mr-caseIgnoreOrderingMatch OBJECT IDENTIFIER ::= {id-mr 3} + +id-mr-caseIgnoreSubstringsMatch OBJECT IDENTIFIER ::= {id-mr 4} + +id-mr-caseExactMatch OBJECT IDENTIFIER ::= {id-mr 5} + +id-mr-caseExactOrderingMatch OBJECT IDENTIFIER ::= {id-mr 6} + +id-mr-caseExactSubstringsMatch OBJECT IDENTIFIER ::= {id-mr 7} + +id-mr-numericStringMatch OBJECT IDENTIFIER ::= {id-mr 8} + +id-mr-numericStringOrderingMatch OBJECT IDENTIFIER ::= {id-mr 9} + +id-mr-numericStringSubstringsMatch OBJECT IDENTIFIER ::= {id-mr 10} + +id-mr-caseIgnoreListMatch OBJECT IDENTIFIER ::= {id-mr 11} + +id-mr-caseIgnoreListSubstringsMatch OBJECT IDENTIFIER ::= {id-mr 12} + +id-mr-booleanMatch OBJECT IDENTIFIER ::= {id-mr 13} + +id-mr-integerMatch OBJECT IDENTIFIER ::= {id-mr 14} + +id-mr-integerOrderingMatch OBJECT IDENTIFIER ::= {id-mr 15} + +id-mr-bitStringMatch OBJECT IDENTIFIER ::= {id-mr 16} + +id-mr-octetStringMatch OBJECT IDENTIFIER ::= {id-mr 17} + +id-mr-octetStringOrderingMatch OBJECT IDENTIFIER ::= {id-mr 18} + +id-mr-octetStringSubstringsMatch OBJECT IDENTIFIER ::= {id-mr 19} + +id-mr-telephoneNumberMatch OBJECT IDENTIFIER ::= {id-mr 20} + +id-mr-telephoneNumberSubstringsMatch OBJECT IDENTIFIER ::= {id-mr 21} + +id-mr-presentationAddressMatch OBJECT IDENTIFIER ::= {id-mr 22} + +id-mr-uniqueMemberMatch OBJECT IDENTIFIER ::= {id-mr 23} + +id-mr-protocolInformationMatch OBJECT IDENTIFIER ::= {id-mr 24} + +id-mr-uTCTimeMatch OBJECT IDENTIFIER ::= {id-mr 25} + +id-mr-uTCTimeOrderingMatch OBJECT IDENTIFIER ::= {id-mr 26} + +id-mr-generalizedTimeMatch OBJECT IDENTIFIER ::= {id-mr 27} + +id-mr-generalizedTimeOrderingMatch OBJECT IDENTIFIER ::= {id-mr 28} + +id-mr-integerFirstComponentMatch OBJECT IDENTIFIER ::= {id-mr 29} + +id-mr-objectIdentifierFirstComponentMatch OBJECT IDENTIFIER ::= {id-mr 30} + +id-mr-directoryStringFirstComponentMatch OBJECT IDENTIFIER ::= {id-mr 31} + +id-mr-wordMatch OBJECT IDENTIFIER ::= {id-mr 32} + +id-mr-keywordMatch OBJECT IDENTIFIER ::= {id-mr 33} + +-- id-mr-certificateExactMatch OBJECT IDENTIFIER ::= {id-mr 34} X.509|Part8 +-- id-mr-certificateMatch OBJECT IDENTIFIER ::= {id-mr 35} X.509|Part8 +-- id-mr-certificatePairExactMatch OBJECT IDENTIFIER ::= {id-mr 36} X.509|Part8 +-- id-mr-certificatePairMatch OBJECT IDENTIFIER ::= {id-mr 37} X.509|Part8 +-- id-mr-certificateListExactMatch OBJECT IDENTIFIER ::= {id-mr 38} X.509|Part8 +-- id-mr-certificateListMatch OBJECT IDENTIFIER ::= {id-mr 39} X.509|Part8 +-- id-mr-algorithmIdentifierMatch OBJECT IDENTIFIER ::= {id-mr 40} X.509|Part8 +id-mr-storedPrefixMatch OBJECT IDENTIFIER ::= + {id-mr 41} + +-- id-mr-attributeCertificateMatch OBJECT IDENTIFIER ::= {id-mr 42} X.509|Part8 +-- id-mr-readerAndKeyIDMatch OBJECT IDENTIFIER ::= {id-mr 43} +-- id-mr-attributeIntegrityMatch OBJECT IDENTIFIER ::= {id-mr 44} +-- id-mr-attributeCertificateExactMatch OBJECT IDENTIFIER ::= {id-mr 45} X.509|Part8 +-- id-mr-holderIssuerMatch OBJECT IDENTIFIER ::= {id-mr 46} X.509|Part8 +id-mr-systemProposedMatch OBJECT IDENTIFIER ::= + {id-mr 47} + +id-mr-generalWordMatch OBJECT IDENTIFIER ::= {id-mr 48} + +id-mr-approximateStringMatch OBJECT IDENTIFIER ::= {id-mr 49} + +id-mr-ignoreIfAbsentMatch OBJECT IDENTIFIER ::= {id-mr 50} + +id-mr-nullMatch OBJECT IDENTIFIER ::= {id-mr 51} + +id-mr-zonalMatch OBJECT IDENTIFIER ::= {id-mr 52} + +-- id-mr-authAttIdMatch OBJECT IDENTIFIER ::= {id-mr 53} X.509|Part8 +-- id-mr-roleSpecCertIdMatch OBJECT IDENTIFIER ::= {id-mr 54} X.509|Part8 +-- id-mr-basicAttConstraintsMatch OBJECT IDENTIFIER ::= {id-mr 55} X.509|Part8 +-- id-mr-delegatedNameConstraintsMatch OBJECT IDENTIFIER ::= {id-mr 56} X.509|Part8 +-- id-mr-timeSpecMatch OBJECT IDENTIFIER ::= {id-mr 57} X.509|Part8 +-- id-mr-attDescriptorMatch OBJECT IDENTIFIER ::= {id-mr 58} X.509|Part8 +-- id-mr-acceptableCertPoliciesMatch OBJECT IDENTIFIER ::= {id-mr 59} X.509|Part8 +-- id-mr-policyMatch OBJECT IDENTIFIER ::= {id-mr 60} X.509|Part8 +-- id-mr-delegationPathMatch OBJECT IDENTIFIER ::= {id-mr 61} X.509|Part8 +-- id-mr-pkiPathMatch OBJECT IDENTIFIER ::= {id-mr 62} X.509|Part8 +id-mr-facsimileNumberMatch OBJECT IDENTIFIER ::= + {id-mr 63} + +id-mr-facsimileNumberSubstringsMatch OBJECT IDENTIFIER ::= {id-mr 64} + +-- id-mr-enhancedCertificateMatch OBJECT IDENTIFIER ::= {id-mr 65} X.509|Part8 +-- id-mr-sOAIdentifierMatch OBJECT IDENTIFIER ::= {id-mr 66} X.509|Part8 +-- id-mr-extensionPresenceMatch OBJECT IDENTIFIER ::= {id-mr 67} X.509|Part8 +id-mr-uuidpairmatch OBJECT IDENTIFIER ::= + {id-mr 68} + +-- id-mr-dualStringMatch OBJECT IDENTIFIER ::= {id-mr 69} X.509|Part8 +-- contexts +id-avc-language OBJECT IDENTIFIER ::= + {id-avc 0} + +id-avc-temporal OBJECT IDENTIFIER ::= {id-avc 1} + +id-avc-locale OBJECT IDENTIFIER ::= {id-avc 2} + +-- id-avc-attributeValueSecurityLabelContext OBJECT IDENTIFIER ::= {id-avc 3} +-- id-avc-attributeValueIntegrityInfoContext OBJECT IDENTIFIER ::= {id-avc 4} +id-avc-ldapAttributeOption OBJECT IDENTIFIER ::= + {id-avc 5} + +END -- SelectedAttributeTypes diff --git a/lib/public_key/asn1/UsefulDefinitions.asn1 b/lib/public_key/asn1/UsefulDefinitions.asn1 new file mode 100644 index 0000000000..a200aac6e2 --- /dev/null +++ b/lib/public_key/asn1/UsefulDefinitions.asn1 @@ -0,0 +1,234 @@ +UsefulDefinitions {joint-iso-itu-t ds(5) module(1) usefulDefinitions(0) 3} +DEFINITIONS ::= +BEGIN + +-- EXPORTS All - +-- The types and values defined in this module are exported for use in the other ASN.1 modules contained +-- within the Directory Specifications, and for the use of other applications which will use them to access +-- Directory services. Other applications may use them for their own purposes, but this will not constrain +-- extensions and modifications needed to maintain or improve the Directory service. +ID ::= OBJECT IDENTIFIER + +ds ID ::= {joint-iso-itu-t ds(5)} + +-- categories of information object +module ID ::= {ds 1} + +serviceElement ID ::= {ds 2} + +applicationContext ID ::= {ds 3} + +attributeType ID ::= {ds 4} + +attributeSyntax ID ::= {ds 5} + +objectClass ID ::= {ds 6} + +-- attributeSet ID ::= {ds 7} +algorithm ID ::= {ds 8} + +abstractSyntax ID ::= {ds 9} + +-- object ID ::= {ds 10} +-- port ID ::= {ds 11} +dsaOperationalAttribute ID ::= + {ds 12} + +matchingRule ID ::= {ds 13} + +knowledgeMatchingRule ID ::= {ds 14} + +nameForm ID ::= {ds 15} + +group ID ::= {ds 16} + +subentry ID ::= {ds 17} + +operationalAttributeType ID ::= {ds 18} + +operationalBinding ID ::= {ds 19} + +schemaObjectClass ID ::= {ds 20} + +schemaOperationalAttribute ID ::= {ds 21} + +administrativeRoles ID ::= {ds 23} + +accessControlAttribute ID ::= {ds 24} + +rosObject ID ::= {ds 25} + +contract ID ::= {ds 26} + +package ID ::= {ds 27} + +accessControlSchemes ID ::= {ds 28} + +certificateExtension ID ::= {ds 29} + +managementObject ID ::= {ds 30} + +attributeValueContext ID ::= {ds 31} + +-- securityExchange ID ::= {ds 32} +idmProtocol ID ::= {ds 33} + +problem ID ::= {ds 34} + +notification ID ::= {ds 35} + +matchingRestriction ID ::= + {ds 36} -- None are currently defined by this specification + +controlAttributeType ID ::= {ds 37} + +-- modules +usefulDefinitions ID ::= {module usefulDefinitions(0) 3} + +informationFramework ID ::= {module informationFramework(1) 3} + +directoryAbstractService ID ::= {module directoryAbstractService(2) 3} + +distributedOperations ID ::= {module distributedOperations(3) 3} + +protocolObjectIdentifiers ID ::= {module protocolObjectIdentifiers(4) 3} + +selectedAttributeTypes ID ::= {module selectedAttributeTypes(5) 3} + +selectedObjectClasses ID ::= {module selectedObjectClasses(6) 3} + +authenticationFramework ID ::= {module authenticationFramework(7) 3} + +algorithmObjectIdentifiers ID ::= {module algorithmObjectIdentifiers(8) 3} + +directoryObjectIdentifiers ID ::= {module directoryObjectIdentifiers(9) 3} + +upperBounds ID ::= {module upperBounds(10) 3} + +dap ID ::= {module dap(11) 3} + +dsp ID ::= {module dsp(12) 3} + +distributedDirectoryOIDs ID ::= {module distributedDirectoryOIDs(13) 3} + +directoryShadowOIDs ID ::= {module directoryShadowOIDs(14) 3} + +directoryShadowAbstractService ID ::= + {module directoryShadowAbstractService(15) 3} + +disp ID ::= {module disp(16) 3} + +dop ID ::= {module dop(17) 3} + +opBindingManagement ID ::= {module opBindingManagement(18) 3} + +opBindingOIDs ID ::= {module opBindingOIDs(19) 3} + +hierarchicalOperationalBindings ID ::= + {module hierarchicalOperationalBindings(20) 3} + +dsaOperationalAttributeTypes ID ::= {module dsaOperationalAttributeTypes(22) 3} + +schemaAdministration ID ::= {module schemaAdministration(23) 3} + +basicAccessControl ID ::= {module basicAccessControl(24) 3} + +directoryOperationalBindingTypes ID ::= + {module directoryOperationalBindingTypes(25) 3} + +certificateExtensions ID ::= {module certificateExtensions(26) 0} + +directoryManagement ID ::= {module directoryManagement(27) 1} + +enhancedSecurity ID ::= {module enhancedSecurity(28) 1} + +iDMProtocolSpecification ID ::= {module iDMProtocolSpecification(30) 4} + +directoryIDMProtocols ID ::= {module directoryIDMProtocols(31) 4} + +-- directorySecurityExchanges ID ::= {module directorySecurityExchanges (29) 1} +-- synonyms +id-oc ID ::= + objectClass + +id-at ID ::= attributeType + +id-as ID ::= abstractSyntax + +id-mr ID ::= matchingRule + +id-nf ID ::= nameForm + +id-sc ID ::= subentry + +id-oa ID ::= operationalAttributeType + +id-ob ID ::= operationalBinding + +id-doa ID ::= dsaOperationalAttribute + +id-kmr ID ::= knowledgeMatchingRule + +id-soc ID ::= schemaObjectClass + +id-soa ID ::= schemaOperationalAttribute + +id-ar ID ::= administrativeRoles + +id-aca ID ::= accessControlAttribute + +id-ac ID ::= applicationContext + +id-rosObject ID ::= rosObject + +id-contract ID ::= contract + +id-package ID ::= package + +id-acScheme ID ::= accessControlSchemes + +id-ce ID ::= certificateExtension + +id-mgt ID ::= managementObject + +id-idm ID ::= idmProtocol + +id-avc ID ::= attributeValueContext + +-- id-se ID ::= securityExchange +id-pr ID ::= problem + +id-not ID ::= notification + +id-mre ID ::= matchingRestriction + +id-cat ID ::= controlAttributeType + +-- obsolete module identifiers +-- usefulDefinition ID ::= {module 0} +-- informationFramework ID ::= {module 1} +-- directoryAbstractService ID ::= {module 2} +-- distributedOperations ID ::= {module 3} +-- protocolObjectIdentifiers ID ::= {module 4} +-- selectedAttributeTypes ID ::= {module 5} +-- selectedObjectClasses ID ::= {module 6} +-- authenticationFramework ID ::= {module 7} +-- algorithmObjectIdentifiers ID ::= {module 8} +-- directoryObjectIdentifiers ID ::= {module 9} +-- upperBounds ID ::= {module 10} +-- dap ID ::= {module 11} +-- dsp ID ::= {module 12} +-- distributedDirectoryObjectIdentifiers ID ::= {module 13} +-- unused module identifiers +-- directoryShadowOIDs ID ::= {module 14} +-- directoryShadowAbstractService ID ::= {module 15} +-- disp ID ::= {module 16} +-- dop ID ::= {module 17} +-- opBindingManagement ID ::= {module 18} +-- opBindingOIDs ID ::= {module 19} +-- hierarchicalOperationalBindings ID ::= {module 20} +-- dsaOperationalAttributeTypes ID ::= {module 22} +-- schemaAdministration ID ::= {module 23} +-- basicAccessControl ID ::= {module 24} +-- operationalBindingOIDs ID ::= {module 25} +END -- UsefulDefinitions diff --git a/lib/public_key/doc/src/cert_records.xml b/lib/public_key/doc/src/cert_records.xml index ad4f5812cb..94c7c46350 100644 --- a/lib/public_key/doc/src/cert_records.xml +++ b/lib/public_key/doc/src/cert_records.xml @@ -5,7 +5,7 @@ <header> <copyright> <year>2008</year> - <year>2011</year> + <year>2012</year> <holder>Ericsson AB, All Rights Reserved</holder> </copyright> <legalnotice> @@ -37,7 +37,10 @@ <p>This chapter briefly describes erlang records derived from asn1 specifications used to handle X509 certificates. The intent is to describe the data types and not to specify the meaning of each - component for this we refer you to RFC 5280. + component for this we refer you to <url + href="http://www.ietf.org/rfc/rfc5280.txt">RFC 5280</url>. Also + descirbed is <p>CertificationRequest</p> that is defined by + <url href="http://www.rsa.com/rsalabs/node.asp?id=2124">PKCS-10</url>. </p> <p>Use the following include directive to get access to the @@ -630,6 +633,40 @@ oid names see table below. Ex: ?'id-dsa-with-sha1'</p> aACompromise </c></p> </section> - + + <section> + <marker id="PKCS10"></marker> + <title>PKCS#10 Certification Request</title> + <code> +#'CertificationRequest'{ + certificationRequestInfo #'CertificationRequestInfo'{}, + signatureAlgorithm #'CertificationRequest_signatureAlgorithm'{}}. + signature {0, binary()} - asn1 compact bitstring + } + +#'CertificationRequestInfo'{ + version atom(), + subject {rdnSequence, [#AttributeTypeAndValue'{}]} , + subjectPKInfo #'CertificationRequestInfo_subjectPKInfo'{}, + attributes [#AttributeTypeAndValue'{}] + } + +#'CertificationRequestInfo_subjectPKInfo'{ + algorithm #'CertificationRequestInfo_subjectPKInfo_algorithm'{} + subjectPublicKey {0, binary()} - asn1 compact bitstring + } + +#'CertificationRequestInfo_subjectPKInfo_algorithm'{ + algorithm = oid(), + parameters = asn1_der_encoded() +} + +#'CertificationRequest_signatureAlgorithm'{ + algorithm = oid(), + parameters = asn1_der_encoded() + } + </code> + </section> + </section> </chapter> diff --git a/lib/public_key/doc/src/introduction.xml b/lib/public_key/doc/src/introduction.xml index a21fcf3576..e0dd5603f7 100644 --- a/lib/public_key/doc/src/introduction.xml +++ b/lib/public_key/doc/src/introduction.xml @@ -1,11 +1,11 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="iso-8859-1" ?> <!DOCTYPE chapter SYSTEM "chapter.dtd"> <chapter> <header> <copyright> <year>2008</year> - <year>2011</year> + <year>2012</year> <holder>Ericsson AB, All Rights Reserved</holder> </copyright> <legalnotice> @@ -37,15 +37,16 @@ <section> <title>Purpose</title> <p> This application provides an API to public key infrastructure - from RFC 3280 (X.509 certificates) and public key formats defined - by the PKCS-standard.</p> + from <url href="http://www.ietf.org/rfc/rfc5280.txt">RFC + 5280</url> (X.509 certificates) and public key formats defined by + the <url href="http://www.rsa.com/rsalabs/node.asp?id=2124"> + PKCS-standard</url></p> </section> <section> <title>Prerequisites</title> - <p>It is assumed that the reader is familiar with the Erlang - programming language, concepts of OTP and has a basic understanding - of the concepts of using public keys.</p> + <p>It is assumed that the reader has a basic understanding + of the concepts of using public keys and digital certificates.</p> </section> <section> diff --git a/lib/public_key/doc/src/notes.xml b/lib/public_key/doc/src/notes.xml index d895042570..a5e8beedf0 100644 --- a/lib/public_key/doc/src/notes.xml +++ b/lib/public_key/doc/src/notes.xml @@ -34,6 +34,41 @@ <file>notes.xml</file> </header> +<section><title>Public_Key 0.17</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + ssh_decode now handles comments, at the end of the line, + containing withe spaces correctly</p> + <p> + Own Id: OTP-9361</p> + </item> + <item> + <p> + Add missing references to sha224 and sha384</p> + <p> + Own Id: OTP-9362 Aux Id: seq12116 </p> + </item> + </list> + </section> + + + <section><title>Improvements and New Features</title> + <list> + <item> + <p> + public_key now supports PKCS-10 and includes exprimental + support for PKCS-7</p> + <p> + Own Id: OTP-10509 Aux Id: kunagi-291 [202] </p> + </item> + </list> + </section> + +</section> + <section><title>Public_Key 0.16</title> <section><title>Improvements and New Features</title> diff --git a/lib/public_key/doc/src/public_key.xml b/lib/public_key/doc/src/public_key.xml index 5c227557f2..2ec1fcff9d 100644 --- a/lib/public_key/doc/src/public_key.xml +++ b/lib/public_key/doc/src/public_key.xml @@ -34,7 +34,7 @@ <modulesummary> API module for public key infrastructure.</modulesummary> <description> <p>This module provides functions to handle public key infrastructure - from RFC 5280 - X.509 certificates and some parts of the PKCS-standard. + from <url href="http://www.ietf.org/rfc/rfc5280.txt">RFC 5280</url>- X.509 certificates and some parts of the PKCS-standard. </p> </description> @@ -61,7 +61,7 @@ <p><code>string = [bytes()]</code></p> <p><code>pki_asn1_type() = 'Certificate' | 'RSAPrivateKey'| 'RSAPublicKey' - 'DSAPrivateKey' | 'DSAPublicKey' | 'DHParameter' | 'SubjectPublicKeyInfo'| 'PrivateKeyInfo'</code></p> + 'DSAPrivateKey' | 'DSAPublicKey' | 'DHParameter' | 'SubjectPublicKeyInfo'| 'PrivateKeyInfo' | 'CertificationRequest'</code></p> <p><code>pem_entry () = {pki_asn1_type(), binary(), %% DER or encrypted DER not_encrypted | cipher_info()} </code></p> diff --git a/lib/public_key/include/public_key.hrl b/lib/public_key/include/public_key.hrl index 2475295974..90ca7256ea 100644 --- a/lib/public_key/include/public_key.hrl +++ b/lib/public_key/include/public_key.hrl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2008-2011. All Rights Reserved. +%% Copyright Ericsson AB 2008-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -78,7 +78,7 @@ -type dsa_public_key() :: {integer(), #'Dss-Parms'{}}. -type pki_asn1_type() :: 'Certificate' | 'RSAPrivateKey' | 'RSAPublicKey' | 'DSAPrivateKey' | 'DSAPublicKey' | 'DHParameter' - | 'SubjectPublicKeyInfo'. + | 'SubjectPublicKeyInfo' | 'CertificationRequest'. -type pem_entry() :: {pki_asn1_type(), binary(), %% DER or Encrypted DER not_encrypted | {Cipher :: string(), Salt :: binary()}}. -type asn1_type() :: atom(). %% see "OTP-PUB-KEY.hrl diff --git a/lib/public_key/src/pubkey_cert_records.erl b/lib/public_key/src/pubkey_cert_records.erl index 33fe940ea2..98004c71a3 100644 --- a/lib/public_key/src/pubkey_cert_records.erl +++ b/lib/public_key/src/pubkey_cert_records.erl @@ -119,7 +119,7 @@ encode_supportedPublicKey(#'OTPSubjectPublicKeyInfo'{algorithm= PA = subjectPublicKey = SPK0}) -> Type = supportedPublicKeyAlgorithms(Algo), {ok, SPK} = 'OTP-PUB-KEY':encode(Type, SPK0), - #'OTPSubjectPublicKeyInfo'{subjectPublicKey = {0,list_to_binary(SPK)}, algorithm=PA}. + #'OTPSubjectPublicKeyInfo'{subjectPublicKey = {0,SPK}, algorithm=PA}. %%% Extensions @@ -161,7 +161,7 @@ decode_extensions(Exts) -> case extension_id(Id) of undefined -> Ext; Type -> - {ok, Value} = 'OTP-PUB-KEY':decode(Type, list_to_binary(Value0)), + {ok, Value} = 'OTP-PUB-KEY':decode(Type, iolist_to_binary(Value0)), Ext#'Extension'{extnValue=transform(Value,decode)} end end, Exts). @@ -176,7 +176,7 @@ encode_extensions(Exts) -> Type -> Value1 = transform(Value0,encode), {ok, Value} = 'OTP-PUB-KEY':encode(Type, Value1), - Ext#'Extension'{extnValue=list_to_binary(Value)} + Ext#'Extension'{extnValue=Value} end end, Exts). diff --git a/lib/public_key/src/pubkey_pem.erl b/lib/public_key/src/pubkey_pem.erl index 910473d629..4012825f20 100644 --- a/lib/public_key/src/pubkey_pem.erl +++ b/lib/public_key/src/pubkey_pem.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2008-2011. All Rights Reserved. +%% Copyright Ericsson AB 2008-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -194,7 +194,12 @@ pem_start('SubjectPublicKeyInfo') -> pem_start('DSAPrivateKey') -> <<"-----BEGIN DSA PRIVATE KEY-----">>; pem_start('DHParameter') -> - <<"-----BEGIN DH PARAMETERS-----">>. + <<"-----BEGIN DH PARAMETERS-----">>; +pem_start('CertificationRequest') -> + <<"-----BEGIN CERTIFICATE REQUEST-----">>; +pem_start('ContentInfo') -> + <<"-----BEGIN PKCS7-----">>. + pem_end(<<"-----BEGIN CERTIFICATE-----">>) -> <<"-----END CERTIFICATE-----">>; pem_end(<<"-----BEGIN RSA PRIVATE KEY-----">>) -> @@ -211,6 +216,10 @@ pem_end(<<"-----BEGIN PRIVATE KEY-----">>) -> <<"-----END PRIVATE KEY-----">>; pem_end(<<"-----BEGIN ENCRYPTED PRIVATE KEY-----">>) -> <<"-----END ENCRYPTED PRIVATE KEY-----">>; +pem_end(<<"-----BEGIN CERTIFICATE REQUEST-----">>) -> + <<"-----END CERTIFICATE REQUEST-----">>; +pem_end(<<"-----BEGIN PKCS7-----">>) -> + <<"-----END PKCS7-----">>; pem_end(_) -> undefined. @@ -229,7 +238,11 @@ asn1_type(<<"-----BEGIN DH PARAMETERS-----">>) -> asn1_type(<<"-----BEGIN PRIVATE KEY-----">>) -> 'PrivateKeyInfo'; asn1_type(<<"-----BEGIN ENCRYPTED PRIVATE KEY-----">>) -> - 'EncryptedPrivateKeyInfo'. + 'EncryptedPrivateKeyInfo'; +asn1_type(<<"-----BEGIN CERTIFICATE REQUEST-----">>) -> + 'CertificationRequest'; +asn1_type(<<"-----BEGIN PKCS7-----">>) -> + 'ContentInfo'. pem_decrypt() -> <<"Proc-Type: 4,ENCRYPTED">>. diff --git a/lib/public_key/test/erl_make_certs.erl b/lib/public_key/test/erl_make_certs.erl index 254aa6d2f9..d6bdd05d01 100644 --- a/lib/public_key/test/erl_make_certs.erl +++ b/lib/public_key/test/erl_make_certs.erl @@ -137,10 +137,10 @@ decode_key(PemBin, Pw) -> encode_key(Key = #'RSAPrivateKey'{}) -> {ok, Der} = 'OTP-PUB-KEY':encode('RSAPrivateKey', Key), - {'RSAPrivateKey', list_to_binary(Der), not_encrypted}; + {'RSAPrivateKey', Der, not_encrypted}; encode_key(Key = #'DSAPrivateKey'{}) -> {ok, Der} = 'OTP-PUB-KEY':encode('DSAPrivateKey', Key), - {'DSAPrivateKey', list_to_binary(Der), not_encrypted}. + {'DSAPrivateKey', Der, not_encrypted}. make_tbs(SubjectKey, Opts) -> Version = list_to_atom("v"++integer_to_list(proplists:get_value(version, Opts, 3))), diff --git a/lib/public_key/test/public_key_SUITE.erl b/lib/public_key/test/public_key_SUITE.erl index f2f30dad6e..2b83bc0a5c 100644 --- a/lib/public_key/test/public_key_SUITE.erl +++ b/lib/public_key/test/public_key_SUITE.erl @@ -111,7 +111,7 @@ all() -> groups() -> [{pem_decode_encode, [], [dsa_pem, rsa_pem, encrypted_pem, - dh_pem, cert_pem]}, + dh_pem, cert_pem, pkcs10_pem]}, {ssh_public_key_decode_encode, [], [ssh_rsa_public_key, ssh_dsa_public_key, ssh_rfc4716_rsa_comment, ssh_rfc4716_dsa_comment, ssh_rfc4716_rsa_subject, ssh_known_hosts, @@ -249,7 +249,42 @@ dh_pem(Config) when is_list(Config) -> DHParameter = public_key:pem_entry_decode(Entry), Entry = public_key:pem_entry_encode('DHParameter', DHParameter). - + +%%-------------------------------------------------------------------- + +pkcs10_pem(doc) -> + [""]; +pkcs10_pem(suite) -> + []; +pkcs10_pem(Config) when is_list(Config) -> + Datadir = ?config(data_dir, Config), + [{'CertificationRequest', DerPKCS10, not_encrypted} = Entry] = + erl_make_certs:pem_to_der(filename:join(Datadir, "req.pem")), + + erl_make_certs:der_to_pem(filename:join(Datadir, "new_req.pem"), [Entry]), + + PKCS10 = public_key:der_decode('CertificationRequest', DerPKCS10), + PKCS10 = public_key:pem_entry_decode(Entry), + + Entry = public_key:pem_entry_encode('CertificationRequest', PKCS10). + +%%-------------------------------------------------------------------- +pkcs7_pem(doc) -> + [""]; +pkcs7_pem(suite) -> + []; +pkcs7_pem(Config) when is_list(Config) -> + Datadir = ?config(data_dir, Config), + [{'ContentInfo', DerPKCS7, not_encrypted} = Entry] = + erl_make_certs:pem_to_der(filename:join(Datadir, "pkcs7_cert.pem")), + + erl_make_certs:der_to_pem(filename:join(Datadir, "new_pkcs7_cert.pem"), [Entry]), + + PKCS7 = public_key:der_decode('ContentInfo', DerPKCS7), + PKCS7 = public_key:pem_entry_decode(Entry), + + Entry = public_key:pem_entry_encode('ContentInfo', PKCS7). + %%-------------------------------------------------------------------- cert_pem(doc) -> [""]; diff --git a/lib/public_key/test/public_key_SUITE_data/pkcs7_cert.pem b/lib/public_key/test/public_key_SUITE_data/pkcs7_cert.pem new file mode 100644 index 0000000000..9b450a22c5 --- /dev/null +++ b/lib/public_key/test/public_key_SUITE_data/pkcs7_cert.pem @@ -0,0 +1,23 @@ +-----BEGIN PKCS7----- +MIID6QYJKoZIhvcNAQcCoIID2jCCA9YCAQExADALBgkqhkiG9w0BBwGgggO8MIID +uDCCAyGgAwIBAgIBAjANBgkqhkiG9w0BAQUFADCBgzEOMAwGA1UEAxMFb3RwQ0Ex +EzARBgNVBAsTCkVybGFuZyBPVFAxFDASBgNVBAoTC0VyaWNzc29uIEFCMQswCQYD +VQQGEwJTRTESMBAGA1UEBxMJU3RvY2tob2xtMSUwIwYJKoZIhvcNAQkBFhZwZXRl +ckBlcml4LmVyaWNzc29uLnNlMB4XDTA4MDEwOTA4MjkzMFoXDTE3MTExNzA4Mjkz +MFowgYQxDzANBgNVBAMTBnNlcnZlcjETMBEGA1UECxMKRXJsYW5nIE9UUDEUMBIG +A1UEChMLRXJpY3Nzb24gQUIxCzAJBgNVBAYTAlNFMRIwEAYDVQQHEwlTdG9ja2hv +bG0xJTAjBgkqhkiG9w0BCQEWFnBldGVyQGVyaXguZXJpY3Nzb24uc2UwgZ8wDQYJ +KoZIhvcNAQEBBQADgY0AMIGJAoGBAKR20HPrkDGdiavHUyWwFEQwta2dmtF2eQZZ +i9Xk68UJYbuU7CikHs2srkrwzj0OPIqbp/xOBNzJ7Kch0o4yO6vcEAiSCJ6AB4uS +M742hrYW4qXgc18K6PqTwSuKr94sn3qQuo4hF/ymCxLrnSicrNpzGOz9A0Lf2+Vk +6hV0BtdHAgMBAAGjggE3MIIBMzAJBgNVHRMEAjAAMAsGA1UdDwQEAwIF4DAdBgNV +HQ4EFgQUi19l/qhEwHP/CUeaEjWy4GhOBRIwgbMGA1UdIwSBqzCBqIAUBquANDqk +uHayvZ0uKOVtkd59AZuhgYykgYkwgYYxETAPBgNVBAMTCGVybGFuZ0NBMRMwEQYD +VQQLEwpFcmxhbmcgT1RQMRQwEgYDVQQKEwtFcmljc3NvbiBBQjESMBAGA1UEBxMJ +U3RvY2tob2xtMQswCQYDVQQGEwJTRTElMCMGCSqGSIb3DQEJARYWcGV0ZXJAZXJp +eC5lcmljc3Nvbi5zZYIBATAhBgNVHREEGjAYgRZwZXRlckBlcml4LmVyaWNzc29u +LnNlMCEGA1UdEgQaMBiBFnBldGVyQGVyaXguZXJpY3Nzb24uc2UwDQYJKoZIhvcN +AQEFBQADgYEAzHGutrGMSeC3Di7Z8d65SM7jZLrkkusmL+D2oPVIOGrfZbVuyfDK +U/nImm99z+lhC/N3JEEpB6PgAYSskfVdBL3LoxbUTaCn/+G3A/G8NfRVIYyANTBe +NW6ueNpjnauLzcwpyXpu3vp1VBg8wBePtGTBIbRHRgtwwHRXAddE/WuhADEA +-----END PKCS7----- diff --git a/lib/public_key/vsn.mk b/lib/public_key/vsn.mk index c8165fa247..b8af89d040 100644 --- a/lib/public_key/vsn.mk +++ b/lib/public_key/vsn.mk @@ -1 +1 @@ -PUBLIC_KEY_VSN = 0.16 +PUBLIC_KEY_VSN = 0.17 diff --git a/lib/runtime_tools/src/dyntrace.erl b/lib/runtime_tools/src/dyntrace.erl index b4579fd5ce..f7dbef6929 100644 --- a/lib/runtime_tools/src/dyntrace.erl +++ b/lib/runtime_tools/src/dyntrace.erl @@ -105,7 +105,7 @@ available() -> user_trace_s1(_Message) -> erlang:nif_error(nif_not_loaded). --spec user_trace_i4s4(iolist(), +-spec user_trace_i4s4(binary() | undefined, integer_maybe(), integer_maybe(), integer_maybe(), integer_maybe(), iolist_maybe(), iolist_maybe(), @@ -115,7 +115,7 @@ user_trace_s1(_Message) -> user_trace_i4s4(_, _, _, _, _, _, _, _, _) -> erlang:nif_error(nif_not_loaded). --spec user_trace_n(n_probe_label(), iolist(), +-spec user_trace_n(n_probe_label(), binary() | undefined, integer_maybe(), integer_maybe(), integer_maybe(), integer_maybe(), iolist_maybe(), iolist_maybe(), diff --git a/lib/runtime_tools/src/observer_backend.erl b/lib/runtime_tools/src/observer_backend.erl index 01e99f3f5e..9498412505 100644 --- a/lib/runtime_tools/src/observer_backend.erl +++ b/lib/runtime_tools/src/observer_backend.erl @@ -83,7 +83,7 @@ get_table2(Parent, Table, Type) -> ets -> ets:info(Table, size); mnesia -> mnesia:table_info(Table, size) end, - case Size > 0 of + case Size =/= undefined andalso Size > 0 of false -> Parent ! {self(), '$end_of_table'}, normal; diff --git a/lib/sasl/src/systools_make.erl b/lib/sasl/src/systools_make.erl index e8b28998c1..29c4a0d168 100644 --- a/lib/sasl/src/systools_make.erl +++ b/lib/sasl/src/systools_make.erl @@ -1485,7 +1485,8 @@ mandatory_modules() -> preloaded() -> %% Sorted - [erl_prim_loader,erlang,init,otp_ring0,prim_file,prim_inet, prim_zip,zlib]. + [erl_prim_loader,erlang,erts_internal,init,otp_ring0,prim_file,prim_inet, + prim_zip,zlib]. %%______________________________________________________________________ %% Kernel processes; processes that are specially treated by the init diff --git a/lib/snmp/doc/src/snmpm.xml b/lib/snmp/doc/src/snmpm.xml index 8ab3be8e18..e6e188d5d5 100644 --- a/lib/snmp/doc/src/snmpm.xml +++ b/lib/snmp/doc/src/snmpm.xml @@ -367,7 +367,7 @@ sec_level = noAuthNoPriv | authNoPriv | authPriv <p>Update agent config. The function <c>update_agent_info/3</c> should be used when several values needs to be updated atomically. </p> <p>See function - <seealso marker="#register_agent">register_agent</seealso>) + <seealso marker="#register_agent">register_agent</seealso> for more info about what kind of items are allowed. </p> <marker id="which_agents"></marker> diff --git a/lib/ssh/doc/html/SSH_protocols.png b/lib/ssh/doc/html/SSH_protocols.png Binary files differnew file mode 100644 index 0000000000..145c96c4cd --- /dev/null +++ b/lib/ssh/doc/html/SSH_protocols.png diff --git a/lib/ssh/doc/man6/.gitignore b/lib/ssh/doc/man6/.gitignore new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/lib/ssh/doc/man6/.gitignore diff --git a/lib/ssh/doc/src/Makefile b/lib/ssh/doc/src/Makefile index da99c4ea0f..0e79d9979f 100644 --- a/lib/ssh/doc/src/Makefile +++ b/lib/ssh/doc/src/Makefile @@ -37,21 +37,30 @@ RELSYSDIR = $(RELEASE_PATH)/lib/$(APPLICATION)-$(VSN) # Target Specs # ---------------------------------------------------- XML_APPLICATION_FILES = ref_man.xml -XML_REF3_FILES = \ - ssh.xml \ +XML_REF3_FILES = ssh.xml \ ssh_channel.xml \ - ssh_connection.xml\ + ssh_connection.xml \ + ssh_client_key_api.xml \ + ssh_server_key_api.xml \ ssh_sftp.xml \ ssh_sftpd.xml \ -XML_PART_FILES = part_notes.xml -XML_CHAPTER_FILES = notes.xml +XML_REF6_FILES = ssh_app.xml + +XML_PART_FILES = part_notes.xml \ + usersguide.xml +XML_CHAPTER_FILES = notes.xml \ + introduction.xml \ + ssh_protocol.xml \ + using_ssh.xml BOOK_FILES = book.xml -XML_FILES = $(BOOK_FILES) $(XML_APPLICATION_FILES) $(XML_REF3_FILES) \ +XML_FILES = $(BOOK_FILES) $(XML_APPLICATION_FILES) $(XML_REF3_FILES) $(XML_REF6_FILES)\ $(XML_PART_FILES) $(XML_CHAPTER_FILES) +IMAGE_FILES = SSH_protocols.png + # ---------------------------------------------------- HTML_FILES = $(XML_APPLICATION_FILES:%.xml=$(HTMLDIR)/%.html) \ @@ -62,10 +71,12 @@ EXTRA_FILES = \ $(DEFAULT_GIF_FILES) \ $(DEFAULT_HTML_FILES) \ $(XML_REF3_FILES:%.xml=$(HTMLDIR)/%.html) \ + $(XML_REF6_FILES:%.xml=$(HTMLDIR)/%.html) \ $(XML_CHAPTER_FILES:%.xml=$(HTMLDIR)/%.html) MAN3_FILES = $(XML_REF3_FILES:%.xml=$(MAN3DIR)/%.3) +MAN6_FILES = $(XML_REF6_FILES:%_app.xml=$(MAN6DIR)/%.6) HTML_REF_MAN_FILE = $(HTMLDIR)/index.html @@ -80,16 +91,19 @@ DVIPS_FLAGS += # ---------------------------------------------------- # Targets # ---------------------------------------------------- -$(HTMLDIR)/%.gif: %.gif +$(HTMLDIR)/%.png: %.png $(INSTALL_DATA) $< $@ docs: pdf html man $(TOP_PDF_FILE): $(XML_FILES) +images: $(IMAGE_FILES:%=$(HTMLDIR)/%) + pdf: $(TOP_PDF_FILE) -html: $(HTML_REF_MAN_FILE) +html: images $(HTML_REF_MAN_FILE) + clean clean_docs: rm -rf $(HTMLDIR)/* @@ -97,7 +111,7 @@ clean clean_docs: rm -f $(TOP_PDF_FILE) $(TOP_PDF_FILE:%.pdf=%.fo) rm -f errs core *~ -man: $(MAN3_FILES) +man: $(MAN3_FILES) $(MAN6_FILES) debug opt: @@ -117,5 +131,8 @@ release_docs_spec: docs $(INSTALL_DATA) $(INFO_FILE) "$(RELSYSDIR)" $(INSTALL_DIR) "$(RELEASE_PATH)/man/man3" $(INSTALL_DATA) $(MAN3DIR)/* "$(RELEASE_PATH)/man/man3" + $(INSTALL_DIR) "$(RELEASE_PATH)/man/man6" + $(INSTALL_DATA) $(MAN6_FILES) "$(RELEASE_PATH)/man/man6" + release_spec: diff --git a/lib/ssh/doc/src/SSH_protocols.png b/lib/ssh/doc/src/SSH_protocols.png Binary files differnew file mode 100644 index 0000000000..145c96c4cd --- /dev/null +++ b/lib/ssh/doc/src/SSH_protocols.png diff --git a/lib/ssh/doc/src/book.xml b/lib/ssh/doc/src/book.xml index fcec1d6f70..3c2375f96d 100644 --- a/lib/ssh/doc/src/book.xml +++ b/lib/ssh/doc/src/book.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="iso-8859-1" ?> <!DOCTYPE book SYSTEM "book.dtd"> <book xmlns:xi="http://www.w3.org/2001/XInclude"> <header titlestyle="normal"> <copyright> - <year>2005</year><year>2010</year> + <year>2005</year><year>2012</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -34,6 +34,9 @@ <preamble> <contents level="2"></contents> </preamble> + <parts lift="yes"> + <xi:include href="usersguide.xml"/> + </parts> <applications> <xi:include href="ref_man.xml"/> </applications> diff --git a/lib/ssh/doc/src/fascicules.xml b/lib/ssh/doc/src/fascicules.xml index 43090b4aed..069d9002e0 100644 --- a/lib/ssh/doc/src/fascicules.xml +++ b/lib/ssh/doc/src/fascicules.xml @@ -1,7 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="iso-8859-1" ?> <!DOCTYPE fascicules SYSTEM "fascicules.dtd"> <fascicules> + <fascicule file="usersguide" href="usersguide_frame.html" entry="no"> + User's Guide + </fascicule> <fascicule file="ref_man" href="ref_man_frame.html" entry="yes"> Reference Manual </fascicule> diff --git a/lib/ssh/doc/src/introduction.xml b/lib/ssh/doc/src/introduction.xml new file mode 100644 index 0000000000..aac8de0f76 --- /dev/null +++ b/lib/ssh/doc/src/introduction.xml @@ -0,0 +1,54 @@ +<?xml version="1.0" encoding="iso-8859-1" ?> +<!DOCTYPE chapter SYSTEM "chapter.dtd"> + +<chapter> + <header> + <copyright> + <year>2012</year> + <holder>Ericsson AB, All Rights Reserved</holder> + </copyright> + <legalnotice> + The contents of this file are subject to the Erlang Public License, + Version 1.1, (the "License"); you may not use this file except in + compliance with the License. You should have received a copy of the + Erlang Public License along with this software. If not, it can be + retrieved online at http://www.erlang.org/. + + Software distributed under the License is distributed on an "AS IS" + basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + the License for the specific language governing rights and limitations + under the License. + + The Initial Developer of the Original Code is Ericsson AB. + </legalnotice> + + <title>Introduction</title> + <prepared>OTP team</prepared> + <file>introduction.xml</file> + </header> + + <section> + <title>Purpose</title> + + <p>Secure Shell (SSH) is a protocol for secure remote login and + other secure network services over an insecure network. SSH + provides a single, full-duplex, byte-oriented connection between + client and server. The protocol also provides privacy, integrity, + server authentication and man-in-the-middle protection.</p> + + <p>The Erlang SSH application is an implementation of the SSH + protocol in Erlang which offers API functions to write customized + SSH clients and servers as well as making the Erlang shell + available via SSH. Also included in the SSH application are an + SFTP (SSH File Transfer Protocol) client <seealso + marker="ssh_sftp">ssh_sftp</seealso> and server <seealso + marker="ssh_sftp">ssh_sftpd</seealso>.</p> + </section> + + <section> + <title>Prerequisites</title> + <p>It is assumed that the reader is familiar with the concepts of <seealso marker="doc/design_principals:users_guide">OTP</seealso> + and has a basic understanding of <url href="http://en.wikipedia.org/wiki/Public-key_cryptography">public keys</url>.</p> + </section> + +</chapter> diff --git a/lib/ssh/doc/src/notes.xml b/lib/ssh/doc/src/notes.xml index 36010da07a..e58d4e2c36 100644 --- a/lib/ssh/doc/src/notes.xml +++ b/lib/ssh/doc/src/notes.xml @@ -1,4 +1,4 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="iso-8859-1" ?> <!DOCTYPE chapter SYSTEM "chapter.dtd"> <chapter> @@ -29,6 +29,50 @@ <file>notes.xml</file> </header> +<section><title>Ssh 2.1.2</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + SSH quiet mode</p> + <p> + A new option to ssh:connect/3,4, quiet_mode. If true, the + client will not print out anything on authorization.</p> + <p> + Own Id: OTP-10429 Aux Id: kunagi-273 [184] </p> + </item> + <item> + <p> + Restrict which key algorithms to use</p> + <p> + A new option to ssh:connect/3,4 is introduced, + public_key_algs, where you can restrict which key + algorithms to use and in which order to try them.</p> + <p> + Own Id: OTP-10498 Aux Id: kunagi-289 [200] </p> + </item> + <item> + <p> + Confidentiality of client password</p> + <p> + Unsets clients password after authentication.</p> + <p> + Own Id: OTP-10511 Aux Id: kunagi-292 [203] </p> + </item> + <item> + <p> + Fixed user interaction for SSH</p> + <p> + It's now available to accept hosts and input password</p> + <p> + Own Id: OTP-10513 Aux Id: kunagi-293 [204] </p> + </item> + </list> + </section> + +</section> + <section><title>Ssh 2.1.1</title> <section><title>Fixed Bugs and Malfunctions</title> @@ -736,7 +780,7 @@ <list> <item> <p> - Ssh timeouts will now behave as expected e.i. defaults to + Ssh timeouts will now behave as expected i.e. defaults to infinity only the user of the ssh application can know of a reasonable timeout value for their application.</p> <p> @@ -789,7 +833,7 @@ caused the ssh daemon to close the connections to all currently logged in users if one user logged out. Another problem related to the supervision tree caused the closing - down of clients to leak processes e.i. all processes was + down of clients to leak processes i.e. all processes was not shutdown correctly.</p> <p> Own Id: OTP-7676</p> @@ -881,7 +925,7 @@ slightly changes the options to the API function ssh:daemon/[1,2,3] deprecating all no longer documented options. Note that the new API enforces the "logical way" - of using the old API e.i. making the subsystem process + of using the old API i.e. making the subsystem process part of the ssh applications supervisor tree, so missuses of the old API are not compatible with the new API.</p> <p> diff --git a/lib/ssh/doc/src/ref_man.xml b/lib/ssh/doc/src/ref_man.xml index 9ab56b28ec..88203b5034 100644 --- a/lib/ssh/doc/src/ref_man.xml +++ b/lib/ssh/doc/src/ref_man.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="iso-8859-1" ?> <!DOCTYPE application SYSTEM "application.dtd"> <application xmlns:xi="http://www.w3.org/2001/XInclude"> <header> <copyright> - <year>2004</year><year>2010</year> + <year>2004</year><year>2012</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -22,19 +22,22 @@ </legalnotice> <title>SSH Reference Manual</title> - <prepared>Jakob Cederlund</prepared> - <docno></docno> + <prepared>OTP</prepared> <date>2007-10-06</date> <rev>%VSN%</rev> - <file>application.sgml</file> + <file>ref_man.xml</file> </header> <description> <p>The SSH application is an erlang implementation of the - secure shell protocol.</p> + secure shell protocol (SSH) as defined by RFC 4250 - 4254</p> + </description> + <xi:include href="ssh_app.xml"/> <xi:include href="ssh.xml"/> <xi:include href="ssh_channel.xml"/> <xi:include href="ssh_connection.xml"/> + <xi:include href="ssh_client_key_api.xml"/> + <xi:include href="ssh_server_key_api.xml"/> <xi:include href="ssh_sftp.xml"/> <xi:include href="ssh_sftpd.xml"/> </application> diff --git a/lib/ssh/doc/src/ssh.xml b/lib/ssh/doc/src/ssh.xml index 0133250979..517cbf1ef9 100644 --- a/lib/ssh/doc/src/ssh.xml +++ b/lib/ssh/doc/src/ssh.xml @@ -22,13 +22,7 @@ </legalnotice> <title>ssh</title> - <prepared>Ingela Anderton Andin</prepared> - <responsible>Håkan Mattsson</responsible> - <docno></docno> - <approved>Håkan Mattsson</approved> - <checked></checked> <date>2007-10-06</date> - <rev>PA1</rev> </header> <module>ssh</module> <modulesummary>Main API of the SSH application</modulesummary> @@ -40,80 +34,85 @@ <title>SSH</title> <list type="bulleted"> - <item>ssh requires the crypto and public_key applications.</item> - <item>Supported SSH-version is 2.0 </item> - <item>Currently supports only a minimum of mac and encryption algorithms i.e. - hmac-sha1, and aes128-cb and 3des-cbc.</item> + <item>SSH requires the crypto and public_key applications.</item> + <item>Supported SSH version is 2.0 </item> + <item>Supported MAC algorithms: hmac-sha1</item> + <item>Supported encryption algorithms: aes128-cb and 3des-cbc</item> </list> </section> <section> - <title>COMMON DATA TYPES </title> + <title>DATA TYPES </title> <p>Type definitions that are used more than once in - this module:</p> + this module and/or abstractions to indicate the intended use of the data + type:</p> <p><c>boolean() = true | false </c></p> - <p><c>string() = list of ASCII characters</c></p> + <p><c>string() = [byte()]</c></p> <p><c>ssh_daemon_ref() - opaque to the user returned by ssh:daemon/[1,2,3]</c></p> <p><c>ssh_connection_ref() - opaque to the user returned by ssh:connect/3</c></p> <p><c>ip_address() - {N1,N2,N3,N4} % IPv4 | {K1,K2,K3,K4,K5,K6,K7,K8} % IPv6</c></p> - <p><c>subsystem_spec() = {subsystem_name(), {channel_callback(), channel_init_args()}} </c></p> + <p><c>subsystem_spec() = {subsystem_name(), + {channel_callback(), channel_init_args()}} </c></p> <p><c>subsystem_name() = string() </c></p> <p><c>channel_callback() = atom() - Name of the erlang module implementing the subsystem using the ssh_channel behavior see</c> <seealso marker="ssh_channel">ssh_channel(3)</seealso></p> <p><c>channel_init_args() = list()</c></p> </section> - + <funcs> <func> <name>close(ConnectionRef) -> ok </name> - <fsummary>Closes a ssh connection</fsummary> + <fsummary>Closes an SSH connection</fsummary> <type> <v>ConnectionRef = ssh_connection_ref()</v> </type> - <desc><p>Closes a ssh connection.</p> + <desc><p>Closes an SSH connection.</p> </desc> </func> <func> <name>connect(Host, Port, Options) -> </name> - <name>connect(Host, Port, Options, Timeout) -> {ok, ssh_connection_ref()} - | {error, Reason}</name> + <name>connect(Host, Port, Options, Timeout) -> {ok, + ssh_connection_ref()} | {error, Reason}</name> <fsummary>Connect to an ssh server.</fsummary> <type> <v>Host = string()</v> <v>Port = integer()</v> - <d>The default is <c><![CDATA[22]]></c>, the registered port for SSH.</d> + <d>The default is <c><![CDATA[22]]></c>, the assigned well known port + number for SSH.</d> <v>Options = [{Option, Value}]</v> <v>Timeout = infinity | integer(milliseconds)</v> </type> <desc> - <p>Connects to an SSH server. No channel is started this is done + <p>Connects to an SSH server. No channel is started. This is done by calling ssh_connect:session_channel/2.</p> <p>Options are:</p> <taglist> <tag><c><![CDATA[{user_dir, string()}]]></c></tag> <item> - <p>Sets the user directory e.i. the directory containing + <p>Sets the user directory i.e. the directory containing ssh configuration files for the user such as - <c><![CDATA[known_hosts]]></c>, <c><![CDATA[id_rsa, id_dsa]]></c> and - <c><![CDATA[authorized_key]]></c>. Defaults to the directory normally - referred to as <c><![CDATA[~/.ssh]]></c> </p> + <c><![CDATA[known_hosts]]></c>, <c><![CDATA[id_rsa, + id_dsa]]></c> and + <c><![CDATA[authorized_key]]></c>. Defaults to the + directory normally referred to as + <c><![CDATA[~/.ssh]]></c> </p> </item> <tag><c><![CDATA[{dsa_pass_phrase, string()}]]></c></tag> <item> - <p>If the user dsa key is protected by a pass phrase it can be + <p>If the user dsa key is protected by a passphrase it can be supplied with this option. </p> </item> <tag><c><![CDATA[{rsa_pass_phrase, string()}]]></c></tag> <item> - <p>If the user rsa key is protected by a pass phrase it can be + <p>If the user rsa key is protected by a passphrase it can be supplied with this option. </p> </item> @@ -135,20 +134,26 @@ password. Do note that it may not always be desirable to use those options from a security point of view.</p> </item> - <tag><c><![CDATA[{public_key_alg, ssh_rsa | ssh_dsa}]]></c></tag> + <tag><c><![CDATA[{public_key_alg, 'ssh-rsa' | 'ssh-dss'}]]></c></tag> <item> <p>Sets the preferred public key algorithm to use for user - authentication. If the the preferred algorithm fails of + authentication. If the the preferred algorithm fails for some reason, the other algorithm is tried. The default is to try <c><![CDATA[ssh_rsa]]></c> first.</p> </item> + <tag><c><![CDATA[{pref_public_key_algs, list()}]]></c></tag> + <item> + <p>List of public key algorithms to try to use, 'ssh-rsa' and 'ssh-dss' available. + Will override <c><![CDATA[{public_key_alg, 'ssh-rsa' | 'ssh-dss'}]]></c></p> + </item> <tag><c><![CDATA[{connect_timeout, timeout()}]]></c></tag> <item> - <p>Sets a timeout on the transport layer connection. Defaults to infinity.</p> + <p>Sets a timeout on the transport layer + connection. Defaults to <c>infinity</c>.</p> </item> - <tag><c><![CDATA[{user, String}]]></c></tag> + <tag><c><![CDATA[{user, string()}]]></c></tag> <item> - <p>Provide a user name. If this option is not given, ssh + <p>Provides a user name. If this option is not given, ssh reads from the environment (<c><![CDATA[LOGNAME]]></c> or <c><![CDATA[USER]]></c> on unix, <c><![CDATA[USERNAME]]></c> on Windows).</p> @@ -160,37 +165,33 @@ password if the password authentication method is attempted.</p> </item> - <tag><c><![CDATA[{user_auth, Fun/3}]]></c></tag> - <item> - <p>Provide a fun for password authentication. The fun - will be called as <c><![CDATA[fun(User, Password, Opts)]]></c> and - should return <c><![CDATA[true]]></c> or <c><![CDATA[false]]></c>.</p> + <tag><c><![CDATA[{key_cb, atom()}]]></c></tag> + <item> + <p>Module implementing the behaviour <seealso marker="ssh_client_key_api">ssh_client_key_api</seealso>. + Can be used to customize the handling of public keys. + </p> </item> - <tag><c><![CDATA[{key_cb, atom() = KeyCallbackModule}]]></c></tag> + <tag><c><![CDATA[{quiet_mode, atom() = boolean()}]]></c></tag> <item> - <p>Provide a special call-back module for key handling. - The call-back module should be modeled after the - <c><![CDATA[ssh_file]]></c> module. The functions that must - be exported are: - <c><![CDATA[private_host_rsa_key/2]]></c>, - <c><![CDATA[private_host_dsa_key/2]]></c>, - <c><![CDATA[lookup_host_key/3]]></c> and - <c><![CDATA[add_host_key/3]]></c>. This is considered - somewhat experimental and will be better documented later on.</p> + <p>If true, the client will not print out anything on authorization.</p> </item> <tag><c><![CDATA[{fd, file_descriptor()}]]></c></tag> <item> - <p>Allow an existing file-descriptor to be used + <p>Allow an existing file descriptor to be used (simply passed on to the transport protocol).</p></item> - <tag><c><![CDATA[{ip_v6_disabled, boolean()}]]></c></tag> + <tag><c><![CDATA[{ipv6_disabled, boolean()}]]></c></tag> + <item> + <p>Determines if SSH shall use IPv6 or not.</p></item> + <tag><c><![CDATA[{idle_time, timeout()}]]></c></tag> <item> - <p>Determines if SSH shall use IPv6 or not.</p></item> + <p>Sets a timeout on connection when no channels are active, default is infinity</p></item> </taglist> </desc> </func> <func> - <name>connection_info(ConnectionRef, [Option]) ->[{Option, Value}] </name> + <name>connection_info(ConnectionRef, [Option]) ->[{Option, + Value}] </name> <fsummary> Retrieves information about a connection. </fsummary> <type> <v>Option = client_version | server_version | peer</v> @@ -205,7 +206,8 @@ <func> <name>daemon(Port) -> </name> <name>daemon(Port, Options) -> </name> - <name>daemon(HostAddress, Port, Options) -> ssh_daemon_ref()</name> + <name>daemon(HostAddress, Port, Options) -> {ok, + ssh_daemon_ref()} | {error, atom()}</name> <fsummary>Starts a server listening for SSH connections on the given port.</fsummary> <type> @@ -216,30 +218,32 @@ <v>Value = term()</v> </type> <desc> - <p>Starts a server listening for SSH connections on the given port.</p> - - <p>Options are:</p> + <p>Starts a server listening for SSH connections on the given + port.</p> + <p>Options are:</p> <taglist> <tag><c><![CDATA[{subsystems, [subsystem_spec()]]]></c></tag> <item> - Provides specifications for handling of subsystems. The - "sftp" subsystem-spec can be retrieved by calling - ssh_sftpd:subsystem_spec/1. If the subsystems option in not present - the value of <c>[ssh_sftpd:subsystem_spec([])]</c> will be used. - It is of course possible to set the option to the empty list - if you do not want the daemon to run any subsystems at all. + Provides specifications for handling of subsystems. The + "sftp" subsystem spec can be retrieved by calling + ssh_sftpd:subsystem_spec/1. If the subsystems option in + not present the value of + <c>[ssh_sftpd:subsystem_spec([])]</c> will be used. It is + of course possible to set the option to the empty list if + you do not want the daemon to run any subsystems at all. </item> - <tag><c><![CDATA[{shell, {Module, Function, Args} | fun(string() = User) - > pid() | - fun(string() = User, ip_address() = PeerAddr) -> pid()}]]></c></tag> + <tag><c><![CDATA[{shell, {Module, Function, Args} | + fun(string() = User) - > pid() | fun(string() = User, + ip_address() = PeerAddr) -> pid()}]]></c></tag> <item> - Defines the read-eval-print loop used when a shell is requested - by the client. Example use the - erlang shell: <c><![CDATA[{shell, start, []}]]></c> which is - the default behavior. + Defines the read-eval-print loop used when a shell is + requested by the client. Default is to use the erlang shell: + <c><![CDATA[{shell, start, []}]]></c> </item> - <tag><c><![CDATA[{ssh_cli,{channel_callback(), channel_init_args()}}]]></c></tag> + <tag><c><![CDATA[{ssh_cli,{channel_callback(), + channel_init_args()}}]]></c></tag> <item> - Provide your own cli implementation, e.i. a channel callback + Provides your own cli implementation, i.e. a channel callback module that implements a shell and command execution. Note that you may customize the shell read-eval-print loop using the option <c>shell</c> which is much less work than implementing @@ -247,27 +251,30 @@ </item> <tag><c><![CDATA[{user_dir, String}]]></c></tag> <item> - <p>Sets the user directory e.i. the directory containing + <p>Sets the user directory i.e. the directory containing ssh configuration files for the user such as - <c><![CDATA[known_hosts]]></c>, <c><![CDATA[id_rsa, id_dsa]]></c> and - <c><![CDATA[authorized_key]]></c>. Defaults to the directory normally - referred to as <c><![CDATA[~/.ssh]]></c> </p> + <c><![CDATA[known_hosts]]></c>, <c><![CDATA[id_rsa, + id_dsa]]></c> and + <c><![CDATA[authorized_key]]></c>. Defaults to the + directory normally referred to as + <c><![CDATA[~/.ssh]]></c> </p> </item> <tag><c><![CDATA[{system_dir, string()}]]></c></tag> <item> - <p>Sets the system directory, containing the host files - that identifies the host for ssh. The default is - <c><![CDATA[/etc/ssh]]></c>, note that SSH normally - requires the host files there to be readable only by - root.</p> + <p>Sets the system directory, containing the host key files + that identifies the host keys for ssh. The default is + <c><![CDATA[/etc/ssh]]></c>, note that for security reasons + this directory is normally only accessible by the root user.</p> </item> <tag><c><![CDATA[{auth_methods, string()}]]></c></tag> <item> - <p>Comma separated string that determines which authentication methodes that the server - should support and in what order they will be tried. Defaults to + <p>Comma separated string that determines which + authentication methodes that the server should support and + in what order they will be tried. Defaults to <c><![CDATA["publickey,keyboard-interactive,password"]]></c></p> </item> - <tag><c><![CDATA[{user_passwords, [{string() = User, string() = Password}]}]]></c></tag> + <tag><c><![CDATA[{user_passwords, [{string() = User, + string() = Password}]}]]></c></tag> <item> <p>Provide passwords for password authentication.They will be used when someone tries to connect to the server and @@ -281,13 +288,19 @@ user. From a security perspective this option makes the server very vulnerable.</p> </item> - <tag><c><![CDATA[{pwdfun, fun/2}]]></c></tag> + <tag><c><![CDATA[{pwdfun, fun(User::string(), password::string() -> boolean()}]]></c></tag> <item> <p>Provide a function for password validation. This is called with user and password as strings, and should return <c><![CDATA[true]]></c> if the password is valid and <c><![CDATA[false]]></c> otherwise.</p> </item> + <tag><c><![CDATA[{key_cb, atom()}]]></c></tag> + <item> + <p>Module implementing the behaviour <seealso marker="ssh_server_key_api">ssh_server_key_api</seealso>. + Can be used to customize the handling of public keys. + </p> + </item> <tag><c><![CDATA[{fd, file_descriptor()}]]></c></tag> <item> <p>Allow an existing file-descriptor to be used @@ -296,6 +309,18 @@ <item> <p>Determines if SSH shall use IPv6 or not (only used when HostAddress is set to any).</p></item> + <tag><c><![CDATA[{failfun, fun()}]]></c></tag> + <item> + <p>Provide a fun() to implement your own logging when a user fails to authenticate.</p> + </item> + <tag><c><![CDATA[{connectfun, fun()}]]></c></tag> + <item> + <p>Provide a fun() to implement your own logging when a user authenticates to the server.</p> + </item> + <tag><c><![CDATA[{disconnectfun, fun()}]]></c></tag> + <item> + <p>Provide a fun() to implement your own logging when a user disconnects from the server.</p> + </item> </taglist> </desc> </func> @@ -311,9 +336,9 @@ <v> Options - see ssh:connect/3</v> </type> <desc> - <p>Starts an interactive shell to an SSH server on the + <p>Starts an interactive shell via an SSH server on the given <c>Host</c>. The function waits for user input, - and will not return until the remote shell is ended (e.g. on + and will not return until the remote shell is ended (i.e. exit from the shell). </p> </desc> @@ -322,25 +347,24 @@ <func> <name>start() -> </name> <name>start(Type) -> ok | {error, Reason}</name> - <fsummary>Starts the Ssh application. </fsummary> + <fsummary>Starts the SSH application. </fsummary> <type> <v>Type = permanent | transient | temporary</v> <v>Reason = term() </v> </type> <desc> - <p>Starts the Ssh application. Default type - is temporary. See also - <seealso marker="kernel:application">application(3)</seealso> - Requires that the crypto application has been started. + <p>Utility function that starts crypto, public_key and the SSH + application. Defult type is temporary. + See also <seealso marker="kernel:application">application(3)</seealso> </p> </desc> </func> <func> <name>stop() -> ok </name> - <fsummary>Stops the Ssh application.</fsummary> + <fsummary>Stops the SSH application.</fsummary> <desc> - <p>Stops the Ssh application. See also + <p>Stops the SSH application. See also <seealso marker="kernel:application">application(3)</seealso></p> </desc> </func> diff --git a/lib/ssh/doc/src/ssh_app.xml b/lib/ssh/doc/src/ssh_app.xml new file mode 100644 index 0000000000..c01f44936a --- /dev/null +++ b/lib/ssh/doc/src/ssh_app.xml @@ -0,0 +1,100 @@ +<?xml version="1.0" encoding="iso-8859-1" ?> +<!DOCTYPE appref SYSTEM "appref.dtd"> + +<appref> + <header> + <copyright> + <year>2012</year> + <holder>Ericsson AB. All Rights Reserved.</holder> + </copyright> + <legalnotice> + The contents of this file are subject to the Erlang Public License, + Version 1.1, (the "License"); you may not use this file except in + compliance with the License. You should have received a copy of the + Erlang Public License along with this software. If not, it can be + retrieved online at http://www.erlang.org/. + + Software distributed under the License is distributed on an "AS IS" + basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + the License for the specific language governing rights and limitations + under the License. + + </legalnotice> + + <title>SSH</title> + <file>ssh_app.xml</file> + </header> + <app>SSH</app> + <appsummary>The ssh application implements the SSH (Secure Shell) protocol and + provides an SFTP (SSH File Transfer Protocol) client and server. </appsummary> + + <section> + <title>DEPENDENCIES</title> + <p>The ssh application uses the Erlang applications public_key and + crypto to handle public keys and encryption, hence these + applications needs to be loaded for the ssh application to work. In + an embedded environment that means they need to be started with + application:start/[1,2] before the ssh application is started. + </p> + </section> + + <section> + <title>CONFIGURATION</title> + + <p>The ssh application does not currently have an application + specific configuration file as described in application(3), + however it will by default use the following configuration files + from openssh: known_hosts, authorized_keys, authorized_keys2, + id_dsa and id_rsa, ssh_host_dsa_key and ssh_host_rsa_key. By + default Erlang SSH will look for id_dsa, id_rsa, known_hosts + and authorized_keys in ~/.ssh, and the host key files in /etc/ssh + . These locations may be changed by the options user_dir and + system_dir. Public key handling may also be customized by + providing a callback module implementing the behaviors + <seealso marker="ssh_client_key_api">ssh_client_key_api</seealso> and + <seealso marker="ssh_server_key_api">ssh_server_key_api</seealso>. + </p> + + <section> + <title>PUBLIC KEYS</title> + <p> + id_dsa and id_rsa are the users private key files, note that + the public key is part of the private key so the ssh + application will not use the id_<*>.pub files. These are + for the users convenience when he/she needs to convey their + public key. + </p> + </section> + + <section> + <title>KNOW HOSTS</title> + <p>The known_hosts file contains a list of approved servers and + their public keys. Once a server is listed, it can be verified + without user interaction. + </p> + </section> + + <section> + <title>AUTHORIZED KEYS</title> + <p>The authorized key file keeps track of the user's authorized + public keys. The most common use of this file is to let users + log in without entering their password which is supported by the + Erlang SSH daemon. + </p> + </section> + + <section> + <title>HOST KEYS</title> + <p>Currently rsa and dsa host keys are supported and are + expected to be found in files named ssh_host_rsa_key and + ssh_host_dsa_key. + </p> + </section> + </section> + + <section> + <title>SEE ALSO</title> + <p>application(3)</p> + </section> + +</appref> diff --git a/lib/ssh/doc/src/ssh_channel.xml b/lib/ssh/doc/src/ssh_channel.xml index c2b7aa94a5..f0083ae8d1 100644 --- a/lib/ssh/doc/src/ssh_channel.xml +++ b/lib/ssh/doc/src/ssh_channel.xml @@ -1,11 +1,11 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="iso-8859-1" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> <year>2009</year> - <year>2009</year> + <year>2012</year> <holder>Ericsson AB, All Rights Reserved</holder> </copyright> <legalnotice> @@ -22,31 +22,35 @@ The Initial Developer of the Original Code is Ericsson AB. </legalnotice> - <title>ssh_channel</title> - <prepared>Ingela Anderton Andin</prepared> - <responsible></responsible> - <docno></docno> - <approved></approved> - <checked></checked> - <date></date> - <rev></rev> </header> <module>ssh_channel</module> - <modulesummary>Generic Ssh Channel Behavior + <modulesummary>-behaviour(ssh_channel). </modulesummary> <description> - <p>Ssh services are implemented as channels that are multiplexed - over an ssh connection and communicates via the ssh connection - protocol. This module provides a callback API that takes care of - generic channel aspects such as flow control and close messages - and lets the callback functions take care of the service specific - parts. + <p>SSH services (clients and servers) are implemented as channels + that are multiplexed over an SSH connection and communicates via + the <url href="http://www.ietf.org/rfc/rfc4254.txt"> SSH + Connection Protocol </url>. This module provides a callback API + that takes care of generic channel aspects such as flow control + and close messages and lets the callback functions take care of + the service (application) specific parts. This behavior also ensures + that the channel process honors the principal of an OTP-process so + that it can be part of a supervisor tree. This is a requirement of + channel processes implementing a subsystem that will be added to + the SSH applications supervisor tree. </p> + + <note> When implementing a SSH subsystem use the + <c>-behaviour(ssh_subsystem).</c> instead of <c>-behaviour(ssh_channel).</c> + as the only relevant callback functions for subsystems are + init/1, handle_ssh_msg/2, handle_msg/2 and terminate/2, so the ssh_subsystem + behaviour is limited version of the ssh_channel behaviour. + </note> </description> <section> - <title>COMMON DATA TYPES </title> + <title>DATA TYPES </title> <p>Type definitions that are used more than once in this module and/or abstractions to indicate the intended use of the data @@ -56,10 +60,10 @@ <p><c>string() = list of ASCII characters</c></p> <p><c>timeout() = infinity | integer() - in milliseconds.</c></p> <p><c>ssh_connection_ref() - opaque to the user returned by - ssh:connect/3 or sent to a ssh channel process</c></p> + ssh:connect/3 or sent to an SSH channel process</c></p> <p><c>ssh_channel_id() = integer() </c></p> <p><c>ssh_data_type_code() = 1 ("stderr") | 0 ("normal") are - currently valid values see RFC 4254 section 5.2.</c></p> + currently valid values see <url href="http://www.ietf.org/rfc/rfc4254.txt">RFC 4254 </url> section 5.2.</c></p> </section> <funcs> @@ -74,13 +78,15 @@ <v>Timeout = timeout() </v> <v>Reply = term() </v> <v>Reason = closed | timeout </v> + </type> <desc> <p>Makes a synchronous call to the channel process by sending a message and waiting until a reply arrives or a timeout - occurs. The channel will call - <c>CallbackModule:handle_call/3</c> to handle the message. - If the channel process does not exist <c>{error, closed}</c> is returned. + occurs. The channel will call <seealso mark = + "#Module:handle_call-3">Module:handle_call/3</seealso> + to handle the message. If the channel process does not exist + <c>{error, closed}</c> is returned. </p> </desc> </func> @@ -98,26 +104,27 @@ <p>Sends an asynchronous message to the channel process and returns ok immediately, ignoring if the destination node or channel process does not exist. The channel will call - <c>CallbackModule:handle_cast/2</c> to handle the message. + <seealso mark = "#Module:handle_cast-3">Module:handle_cast/2</seealso> + to handle the message. </p> </desc> </func> <func> <name>enter_loop(State) -> _ </name> - <fsummary> Makes an existing process into a ssh_channel process. </fsummary> + <fsummary> Makes an existing process an ssh_channel process. </fsummary> <type> - <v> State = term() - as returned by ssh_channel:init/1</v> + <v> State = term() - as returned by <seealso mark = "#init-1">ssh_channel:init/1</seealso></v> </type> <desc> - <p> Makes an existing process into a <c>ssh_channel</c> + <p> Makes an existing process an <c>ssh_channel</c> process. Does not return, instead the calling process will - enter the <c>ssh_channel</c> process receive loop and become a + enter the <c>ssh_channel</c> process receive loop and become an <c>ssh_channel process.</c> The process must have been started using one of the start functions in proc_lib, see <seealso marker="stdlib:proc_lib">proc_lib(3)</seealso>. The user is responsible for any initialization of the process - and needs to call ssh_channel:init/1. + and needs to call <seealso mark = "#init-1">ssh_channel:init/1</seealso> </p> </desc> </func> @@ -126,7 +133,10 @@ <name>init(Options) -> {ok, State} | {ok, State, Timeout} | {stop, Reason} </name> <fsummary> Initiates a ssh_channel process.</fsummary> <type> - <v> Options = [{Option, Value}]</v> + <v>Options = [{Option, Value}]</v> + <v>State = term()</v> + <v>Timeout = timeout() </v> + <v>Reason = term() </v> </type> <desc> <p> @@ -134,24 +144,27 @@ </p> <taglist> <tag><c><![CDATA[{channel_cb, atom()}]]></c></tag> - <item>The module that implements the channel behavior.</item> + <item>The module that implements the channel behaviour.</item> <tag><c><![CDATA[{init_args(), list()}]]></c></tag> - <item> The list of arguments to the callback modules + <item> The list of arguments to the callback module's init function.</item> <tag><c><![CDATA[{cm, connection_ref()}]]></c></tag> - <item> Reference to the ssh connection.</item> + <item> Reference to the ssh connection as returned by <seealso + marker="ssh#connect-3">ssh:connect/3</seealso></item> <tag><c><![CDATA[{channel_id, channel_id()}]]></c></tag> <item> Id of the ssh channel.</item> </taglist> - <note><p>This function is normally not called by the user, it is - only needed if for some reason the channel process needs - to be started with help of <c>proc_lib</c> instead calling - <c>ssh_channel:start/4</c> or <c>ssh_channel:start_link/4</c> </p> + <note><p>This function is normally not called by the + user. The user only needs to call if for some reason the + channel process needs to be started with help of + <c>proc_lib</c> instead of calling + <c>ssh_channel:start/4</c> or + <c>ssh_channel:start_link/4</c> </p> </note> </desc> </func> @@ -167,12 +180,12 @@ <p>This function can be used by a channel to explicitly send a reply to a client that called <c>call/[2,3]</c> when the reply cannot be defined in the return value of - <c>CallbackModule:handle_call/3</c>.</p> + <seealso marker ="#Module:handle_call-3">Module:handle_call/3</seealso>.</p> <p><c>Client</c> must be the <c>From</c> argument provided to the callback function <c>handle_call/3</c>. <c>Reply</c> is an arbitrary term, - which will be given back to the client as the return value of - <c>ssh_channel:call/[2,3].</c></p> + which will be given back to the client as the return value of + <seealso marker="#call-2">ssh_channel:call/[2,3].</seealso>></p> </desc> </func> @@ -180,11 +193,12 @@ <name>start(SshConnection, ChannelId, ChannelCb, CbInitArgs) -> </name> <name>start_link(SshConnection, ChannelId, ChannelCb, CbInitArgs) -> {ok, ChannelRef} | {error, Reason}</name> - <fsummary> Starts a processes that handles a ssh channel. </fsummary> + <fsummary> Starts a processes that handles a SSH channel. </fsummary> <type> <v>SshConnection = ssh_connection_ref()</v> <v>ChannelId = ssh_channel_id() </v> - <d> As returned by ssh_connection:session_channel/[2,4]</d> + <d> As returned by cannot be defined in the return value of + <seealso marker ="ssh_connection#session_channel/2">ssh_connection:session_channel/[2,4]</seealso></d> <v>ChannelCb = atom()</v> <d> The name of the module implementing the service specific parts of the channel.</d> @@ -193,10 +207,10 @@ <v>ChannelRef = pid()</v> </type> <desc> - <p>Starts a processes that handles a ssh channel. Will be - called internally by the ssh daemon or explicitly by the ssh - client implementations. A channel process traps exit signals - by default. + <p>Starts a processes that handles an SSH channel. It will be + called internally by the SSH daemon or explicitly by the SSH + client implementations. The behavior will set the + <c>trap_exit</c> flag to true. </p> </desc> </func> @@ -204,72 +218,61 @@ </funcs> <section> - <title>CALLBACK FUNCTIONS</title> - - <p>The functions init/1, terminate/2, handle_ssh_msg/2 and - handle_msg/2 are the functions that are required to provide the - implementation for a server side channel, such as a ssh subsystem - channel that can be plugged into the erlang ssh daemon see - <seealso marker="ssh">ssh:daemon/[2, 3]</seealso>. The - handle_call/3, handle_cast/2 code_change/3 and enter_loop/1 - functions are only relevant when implementing a client side - channel.</p> - </section> - - <section> <marker id="cb_timeouts"></marker> <title> CALLBACK TIMEOUTS</title> - <p> If an integer timeout value is provided in a return value of - one of the callback functions, a timeout will occur unless a - message is received within <c>Timeout</c> milliseconds. A timeout - is represented by the atom <c>timeout</c> which should be handled - by the <seealso marker="#handle_msg">handle_msg/2</seealso> - callback function. The atom infinity can be used to wait - indefinitely, this is the default value. </p> + + <p>The timeout values that may be returned by the callback functions + has the same semantics as in a <seealso marker="stdlib#gen_server">gen_server</seealso> + If the timeout occurs <seealso marker="#handle_msg">handle_msg/2</seealso> + will be called as <c>handle_msg(timeout, State). </c></p> </section> <funcs> <func> - <name>CallbackModule:code_change(OldVsn, State, Extra) -> {ok, + <name>Module:code_change(OldVsn, State, Extra) -> {ok, NewState}</name> <fsummary> Converts process state when code is changed.</fsummary> <type> - <v> Converts process state when code is changed.</v> + <v>OldVsn = term()</v> + <d>In the case of an upgrade, <c>OldVsn</c> is <c>Vsn</c>, and + in the case of a downgrade, <c>OldVsn</c> is + <c>{down,Vsn}</c>. <c>Vsn</c> is defined by the <c>vsn</c> + attribute(s) of the old version of the callback module + <c>Module</c>. If no such attribute is defined, the version is + the checksum of the BEAM file.</d> + <v>State = term()</v> + <d>The internal state of the channel.</d> + <v>Extra = term()</v> + <d>Passed as-is from the <c>{advanced,Extra}</c> + part of the update instruction.</d> </type> <desc> - <p>This function is called by a client side channel when it - should update its internal state during a release - upgrade/downgrade, i.e. when the instruction - <c>{update,Module,Change,...}</c> where - <c>Change={advanced,Extra}</c> is given in the <c>appup</c> - file. See <seealso - marker="doc/design_principles:release_handling#instr">OTP - Design Principles</seealso> for more information. Any new - connection will benefit from a server side upgrade but - already started connections on the server side will not be - affected. - </p> + <p> Converts process state when code is changed.</p> + + <p>This function is called by a client side channel when it + should update its internal state during a release + upgrade/downgrade, i.e. when the instruction + <c>{update,Module,Change,...}</c> where + <c>Change={advanced,Extra}</c> is given in the <c>appup</c> + file. See <seealso marker="doc/design_principles:release_handling#instr">OTP + Design Principles</seealso> for more information. + </p> - <note><p>If there are long lived ssh connections and more - than one upgrade in a short time this may cause the old - connections to fail as only two versions of the code may - be loaded simultaneously.</p></note> + <note><p>Soft upgrade according to the OTP release concept + is not straight forward for the server side, as subsystem + channel processes are spawned by the SSH application and + hence added to its supervisor tree. It could be possible to + upgrade the subsystem channels, when upgrading the user + application, if the callback functions can handle two + versions of the state, but this function can not be used in + the normal way.</p> + </note> - <p>In the case of an upgrade, <c>OldVsn</c> is <c>Vsn</c>, and - in the case of a downgrade, <c>OldVsn</c> is - <c>{down,Vsn}</c>. <c>Vsn</c> is defined by the <c>vsn</c> - attribute(s) of the old version of the callback module - <c>Module</c>. If no such attribute is defined, the version - is the checksum of the BEAM file.</p> - <p><c>State</c> is the internal state of the channel.</p> - <p><c>Extra</c> is passed as-is from the <c>{advanced,Extra}</c> - part of the update instruction.</p> - <p>The function should return the updated internal state.</p> </desc> </func> <func> - <name>CallbackModule:init(Args) -> {ok, State} | {ok, State, Timeout} | + <name>Module:init(Args) -> {ok, State} | {ok, State, timeout()} | {stop, Reason}</name> <fsummary> Makes necessary initializations and returns the initial channel state if the initializations succeed.</fsummary> @@ -277,7 +280,6 @@ <v> Args = term() </v> <d> Last argument to ssh_channel:start_link/4.</d> <v> State = term() </v> - <v>Timeout = timeout() </v> <v> Reason = term() </v> </type> <desc> @@ -290,7 +292,7 @@ </func> <func> - <name>CallbackModule:handle_call(Msg, From, State) -> Result</name> + <name>Module:handle_call(Msg, From, State) -> Result</name> <fsummary> Handles messages sent by calling <c>ssh_channel:call/[2,3]</c></fsummary> <type> @@ -298,17 +300,16 @@ <v>From = opaque to the user should be used as argument to ssh_channel:reply/2</v> <v>State = term()</v> - <v>Result = {reply, Reply, NewState} | {reply, Reply, NewState, Timeout} - | {noreply, NewState} | {noreply , NewState, Timeout} + <v>Result = {reply, Reply, NewState} | {reply, Reply, NewState, timeout()} + | {noreply, NewState} | {noreply , NewState, timeout()} | {stop, Reason, Reply, NewState} | {stop, Reason, NewState} </v> <v>Reply = term() - will be the return value of ssh_channel:call/[2,3]</v> - <v>Timeout = timeout() </v> - <v>NewState = term() - a possible updated version of State</v> + <v>NewState = term()</v> <v>Reason = term()</v> </type> <desc> <p>Handles messages sent by calling - <c>ssh_channel:call/[2,3]</c> + <seealso marker="#call-2">ssh_channel:call/[2,3]</seealso> </p> <p>For more detailed information on timeouts see the section <seealso marker="#cb_timeouts">CALLBACK TIMEOUTS</seealso>. </p> @@ -316,16 +317,15 @@ </func> <func> - <name>CallbackModule:handle_cast(Msg, State) -> Result</name> + <name>Module:handle_cast(Msg, State) -> Result</name> <fsummary> Handles messages sent by calling <c>ssh_channel:cact/2</c></fsummary> <type> <v>Msg = term()</v> <v>State = term()</v> - <v>Result = {noreply, NewState} | {noreply, NewState, Timeout} + <v>Result = {noreply, NewState} | {noreply, NewState, timeout()} | {stop, Reason, NewState}</v> - <v>NewState = term() - a possible updated version of State</v> - <v>Timeout = timeout() </v> + <v>NewState = term() </v> <v>Reason = term()</v> </type> <desc> @@ -339,7 +339,7 @@ </func> <func> - <name>CallbackModule:handle_msg(Msg, State) -> {ok, State} | + <name>Module:handle_msg(Msg, State) -> {ok, State} | {stop, ChannelId, State}</name> <fsummary> Handle other messages than ssh connection protocol, @@ -359,136 +359,37 @@ <taglist> <tag><c><![CDATA[{ssh_channel_up, ssh_channel_id(), ssh_connection_ref()}]]></c></tag> - <item>This is the first messages that will be received - by the channel, it is sent just before - the ssh_channel:init/1 function returns successfully. - This is especially useful if the server wants - to send a message to the client without first receiving - a message from the client. If the message is not useful - for your particular problem just ignore it by immediately - returning {ok, State}. + <item>This is the first messages that will be received by + the channel, it is sent just before the <seealso + marker="#init-2">ssh_channel:init/1</seealso> function + returns successfully. This is especially useful if the + server wants to send a message to the client without first + receiving a message from it. If the message is not + useful for your particular scenario just ignore it by + immediately returning {ok, State}. </item> </taglist> </desc> </func> <func> - <name>CallbackModule:handle_ssh_msg(Msg, State) -> {ok, State} | {stop, + <name>Module:handle_ssh_msg(Msg, State) -> {ok, State} | {stop, ssh_channel_id(), State}</name> <fsummary> Handles ssh connection protocol messages. </fsummary> <type> - <v>Msg = {ssh_cm, ssh_connection_ref(), SshMsg}</v> - <v> SshMsg = tuple() - see message list below</v> + <v>Msg = <seealso marker="ssh_connection"> ssh_connection:event() </seealso> </v> <v>State = term()</v> </type> <desc> <p> Handles ssh connection protocol messages that may need service specific attention. </p> - - <p> All channels should handle the following messages. For - channels implementing subsystems the handle_ssh_msg-callback - will not be called for any other messages. </p> - - <taglist> - <tag><c><![CDATA[{ssh_cm, ssh_connection_ref(), {data, ssh_channel_id(), - ssh_data_type_code(), binary() = Data}}]]></c></tag> - <item> Data has arrived on the channel. When the callback - for this message returns the channel behavior will adjust - the ssh flow control window.</item> - - <tag><c><![CDATA[{ssh_cm, ssh_connection_ref(), {eof, - ssh_channel_id()}}]]></c></tag> - <item>Indicteas that the other side will not send any more - data.</item> - - <tag><c><![CDATA[{ssh_cm, ssh_connection_ref(), {signal, - ssh_channel_id(), ssh_signal()}} ]]></c></tag> - <item>A signal can be delivered to the remote - process/service using the following message. Some systems - may not implement signals, in which case they should ignore - this message.</item> - - <tag><c><![CDATA[{ssh_cm, ssh_connection_ref(), - {exit_signal, ssh_channel_id(), string() = exit_signal, - string() = ErrorMsg, string() = - LanguageString}}]]></c></tag> - <item>A remote execution may terminate violently due to a - signal then this message may be received. For details on valid string - values see RFC 4254 section 6.10</item> - - <tag><c><![CDATA[{ssh_cm, ssh_connection_ref(), {exit_status, - ssh_channel_id(), integer() = ExitStatus}}]]></c></tag> - <item> When the command running at the other end terminates, - the following message can be sent to return the exit status - of the command. A zero 'exit_status' usually means that the - command terminated successfully.</item> - </taglist> - - <p> Channels implementing a shell and command execution on the server side - should also handle the following messages. </p> - - <taglist> - <tag><c><![CDATA[{ssh_cm, ssh_connection_ref(), {env, ssh_channel_id(), - boolean() = WantReply, string() = Var, string() = Value}}]]></c></tag> - <item> Environment variables may be passed to the - shell/command to be started later. Note that before the - callback returns it should call the function - ssh_connection:reply_request/4 with the boolean value of <c> - WantReply</c> as the second argument. - </item> - - <tag><c><![CDATA[{ssh_cm, ConnectionRef, {exec, ssh_channel_id(), - boolean() = WantReply, string() = Cmd}}]]></c></tag> - <item> This message will request that the server start the - execution of the given command. Note that before the - callback returns it should call the function - ssh_connection:reply_request/4 with the boolean value of <c> - WantReply</c> as the second argument.</item> - - <tag><c><![CDATA[{ssh_cm, ssh_connection_ref(), {pty, ssh_channel_id(), - boolean() = WantReply, {string() = Terminal, integer() = CharWidth, - integer() = RowHeight, integer() = PixelWidth, integer() = PixelHight, - [{atom() | integer() = Opcode, - integer() = Value}] = TerminalModes}}}]]></c></tag> - <item>A pseudo-terminal has been requested for the - session. Terminal is the value of the TERM environment - variable value (e.g., vt100). Zero dimension parameters must - be ignored. The character/row dimensions override the pixel - dimensions (when nonzero). Pixel dimensions refer to the - drawable area of the window. The <c>Opcode</c> in the - <c>TerminalModes</c> list is the mnemonic name, represented - as an lowercase erlang atom, defined in RFC 4254 section 8, - or the opcode if the mnemonic name is not listed in the - RFC. Example <c>OP code: 53, mnemonic name ECHO erlang atom: - echo</c>. Note that before the callback returns it should - call the function ssh_connection:reply_request/4 with the - boolean value of <c> WantReply</c> as the second - argument.</item> - - <tag><c><![CDATA[{ssh_cm, ConnectionRef, {shell, boolean() = - WantReply}}]]></c></tag> - <item> This message will request that the user's default - shell be started at the other end. Note that before the - callback returns it should call the function - ssh_connection:reply_request/4 with the value of <c> - WantReply</c> as the second argument. - </item> - - <tag><c><![CDATA[ {ssh_cm, ssh_connection_ref(), {window_change, - ssh_channel_id(), integer() = CharWidth, integer() = RowHeight, - integer() = PixWidth, integer() = PixHeight}}]]></c></tag> - <item> When the window (terminal) size changes on the client - side, it MAY send a message to the other side to inform it - of the new dimensions.</item> - </taglist> <p> The following message is completely taken care of by the ssh channel behavior</p> <taglist> - <tag><c><![CDATA[{ssh_cm, ssh_connection_ref(), {closed, - ssh_channel_id()}}]]></c></tag> + <tag><c><![CDATA[{closed, ssh_channel_id()}]]></c></tag> <item> The channel behavior will send a close message to the other side if such a message has not already been sent and then terminate the channel with reason normal.</item> @@ -497,7 +398,7 @@ </func> <func> - <name>CallbackModule:terminate(Reason, State) -> _</name> + <name>Module:terminate(Reason, State) -> _</name> <fsummary> </fsummary> <type> <v>Reason = term()</v> @@ -505,12 +406,12 @@ </type> <desc> <p>This function is called by a channel process when it is - about to terminate. Before this function is called ssh_connection:close/2 - will be called if it has not been called earlier. - This function should be the opposite of <c>CallbackModule:init/1</c> - and do any necessary cleaning up. When it returns, the - channel process terminates with reason <c>Reason</c>. The return value is - ignored. + about to terminate. Before this function is called <seealso + marker="ssh_connection#close-2"> ssh_connection:close/2 + </seealso> will be called if it has not been called earlier. + This function should do any necessary cleaning + up. When it returns, the channel process terminates with + reason <c>Reason</c>. The return value is ignored. </p> </desc> </func> diff --git a/lib/ssh/doc/src/ssh_client_key_api.xml b/lib/ssh/doc/src/ssh_client_key_api.xml new file mode 100644 index 0000000000..abc1070e78 --- /dev/null +++ b/lib/ssh/doc/src/ssh_client_key_api.xml @@ -0,0 +1,124 @@ +<?xml version="1.0" encoding="iso-8859-1" ?> +<!DOCTYPE erlref SYSTEM "erlref.dtd"> + +<erlref> + <header> + <copyright> + <year>2012</year> + <holder>Ericsson AB, All Rights Reserved</holder> + </copyright> + <legalnotice> + The contents of this file are subject to the Erlang Public License, + Version 1.1, (the "License"); you may not use this file except in + compliance with the License. You should have received a copy of the + Erlang Public License along with this software. If not, it can be + retrieved online at http://www.erlang.org/. + + Software distributed under the License is distributed on an "AS IS" + basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + the License for the specific language governing rights and limitations + under the License. + + The Initial Developer of the Original Code is Ericsson AB. + </legalnotice> + <title>ssh_client_key_api</title> + </header> + <module>ssh_client_key_api</module> + <modulesummary> + -behaviour(ssh_client_key_api). + </modulesummary> + <description> + <p> Behavior describing the API for an SSH client's public key handling. + By implementing the callbacks defined. + in this behavior it is possible to customize the SSH client's public key + handling. By default the SSH application implements this behavior + with help of the standard openssh files, see <seealso marker="SSH_app"> ssh(6)</seealso>. </p> + </description> + + <section> + <title>DATA TYPES </title> + + <p>Type definitions that are used more than once in this module + and/or abstractions to indicate the intended use of the data + type:</p> + + <p> boolean() = true | false</p> + <p> string() = [byte()] </p> + <p> public_key() = #'RSAPublicKey'{}| {integer(), #'Dss-Parms'{}}| term()</p> + <p> private_key() = #'RSAPublicKey'{}| {integer(), #'Dss-Parms'{}}| term()</p> + <p> public_key_algorithm() = 'ssh-rsa'| 'ssh-dss' | atom()</p> + + </section> + + <funcs> + <func> + <name>Module:add_host_key(HostNames, Key, ConnectOptions) -> ok | {error, Reason}</name> + <fsummary>Adds a host key to the set of trusted host keys</fsummary> + <type> + <v>HostNames = string()</v> + <d>Description of the host that owns the <c>PublicKey</c></d> + + <v>Key = public_key() </v> + <d> Normally an RSA or DSA public key but handling of other public keys can be added</d> + + <v>ConnectOptions = proplists:proplist() </v> + <d>Options provided to <seealso marker="ssh#daemon">ssh:connect/[3,4]</seealso></d> + <v>Reason = term() </v> + </type> + <desc> + <p> Adds a host key to the set of trusted host keys</p> + </desc> + </func> + + <func> + <name>Module:is_host_key(Key, Host, Algorithm, ConnectOptions) -> Result</name> + <fsummary>Checks if a host key is trusted</fsummary> + <type> + <v>Key = public_key() </v> + <d> Normally an RSA or DSA public key but handling of other public keys can be added</d> + + <v>Host = string()</v> + <d>Description of the host</d> + + <v>Algorithm = public_key_algorithm()</v> + <d> Host key algorithm. Should support 'ssh-rsa'| 'ssh-dss' but additional algorithms + can be handled.</d> + + <v> ConnectOptions = proplists:proplist() </v> + <d>Options provided to <seealso marker="ssh#daemon">ssh:connect/[3,4]</seealso></d> + + <v> Result = boolean()</v> + </type> + <desc> + <p>Checks if a host key is trusted</p> + </desc> + </func> + + <func> + <name>Module:user_key(Algorithm, ConnectOptions) -> + {ok, PrivateKey} | {error, Reason}</name> + <fsummary>Fetches the users "public key" matching the <c>Algorithm</c>.</fsummary> + <type> + <v>Algorithm = public_key_algorithm()</v> + <d> Host key algorithm. Should support 'ssh-rsa'| 'ssh-dss' but additional algorithms + can be handled.</d> + + <v> ConnectOptions = proplists:proplist() </v> + <d>Options provided to <seealso marker="ssh#daemon">ssh:connect/[3,4]</seealso></d> + + <v> PrivateKey = private_key()</v> + <d> The private key of the user matching the <c>Algorithm</c></d> + + <v>Reason = term() </v> + </type> + + <desc> + <p>Fetches the users "public key" matching the <c>Algorithm</c>. + <note>The private key contains the public key</note> + </p> + </desc> + </func> + + </funcs> + +</erlref> diff --git a/lib/ssh/doc/src/ssh_connection.xml b/lib/ssh/doc/src/ssh_connection.xml index a9ae13d556..c66622307f 100644 --- a/lib/ssh/doc/src/ssh_connection.xml +++ b/lib/ssh/doc/src/ssh_connection.xml @@ -1,11 +1,11 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="iso-8859-1" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> <year>2008</year> - <year>2011</year> + <year>2012</year> <holder>Ericsson AB, All Rights Reserved</holder> </copyright> <legalnotice> @@ -24,69 +24,178 @@ </legalnotice> <title>ssh_connection</title> - <prepared>Ingela Anderton Andin</prepared> - <responsible></responsible> - <docno></docno> - <approved></approved> - <checked></checked> <date></date> - <rev></rev> </header> <module>ssh_connection</module> - <modulesummary>This module provides an API to the ssh connection protocol. + <modulesummary>This module provides API functions to send <url href="http://www.ietf.org/rfc/rfc4254.txt"> SSH Connection Protocol </url> + events to the other side of an SSH channel. </modulesummary> + <description> - <p>This module provides an API to the ssh connection protocol. - Not all features of the connection protocol are officially supported yet. - Only the ones supported are documented here.</p> + <p>The SSH Connection Protocol is used by clients and servers + (i.e. SSH channels) to communicate over the SSH connection. The + API functions in this module sends SSH Connection Protocol events + that are received as messages by the remote channel. + In the case that the receiving channel is an Erlang process the + message will be on the following format + <c><![CDATA[{ssh_cm, ssh_connection_ref(), ssh_event_msg()}]]></c>. If the <seealso + marker="ssh_channel">ssh_channel</seealso> behavior is used to + implement the channel process these will be handled by + <seealso + marker="ssh_channel#CallbackModule:handled_ssh_msg-2">handle_ssh_msg/2 </seealso>.</p> </description> - <section> - <title>COMMON DATA TYPES </title> + <section> + <title>DATA TYPES </title> + <p>Type definitions that are used more than once in this module and/or abstractions to indicate the intended use of the data type:</p> - + <p><c>boolean() = true | false </c></p> <p><c>string() = list of ASCII characters</c></p> <p><c>timeout() = infinity | integer() - in milliseconds.</c></p> <p><c>ssh_connection_ref() - opaque to the user returned by - ssh:connect/3 or sent to a ssh channel processes</c></p> + ssh:connect/3 or sent to an SSH channel processes</c></p> <p><c>ssh_channel_id() = integer() </c></p> <p><c>ssh_data_type_code() = 1 ("stderr") | 0 ("normal") are - currently valid values see RFC 4254 section 5.2.</c></p> + currently valid values see</c> <url href="http://www.ietf.org/rfc/rfc4254.txt">RFC 4254 </url> section 5.2.</p> <p><c>ssh_request_status() = success | failure</c></p> - </section> + <p><c>event() = {ssh_cm, ssh_connection_ref(), ssh_event_msg()} </c></p> + <p><c>ssh_event_msg() = data_events() | status_events() | terminal_events() </c></p> + + <taglist> + <tag><b>data_events()</b></tag> + <item> + <taglist> + <tag><c><![CDATA[{data, ssh_channel_id(), ssh_data_type_code(), binary() = Data}]]></c></tag> + <item> Data has arrived on the channel. This event is sent as + result of calling <seealso marker="#send-3"> ssh_connection:send/[3,4,5] </seealso></item> + + <tag><c><![CDATA[{eof, ssh_channel_id()}]]></c></tag> + <item>Indicates that the other side will not send any more + data. This event is sent as result of calling <seealso + marker="#send_eof-2"> ssh_connection:send_eof/2</seealso> + </item> + </taglist> + </item> + + <tag><b>status_events()</b></tag> + <item> + + <taglist> + <tag><c><![CDATA[{signal, ssh_channel_id(), ssh_signal()}]]></c></tag> + <item>A signal can be delivered to the remote process/service + using the following message. Some systems will not support + signals, in which case they should ignore this message. There is + currently no funtion to generate this event as the signals + refered to are on OS-level and not something generated by an + Erlang program.</item> + + <tag><c><![CDATA[{exit_signal, ssh_channel_id(), string() = ExitSignal, string() = ErrorMsg, + string() = LanguageString}]]></c></tag> + + <item>A remote execution may terminate violently due to a signal + then this message may be received. For details on valid string + values see <url href="http://www.ietf.org/rfc/rfc4254.txt">RFC 4254</url> section 6.10. Special case of the signals + mentioned above.</item> + + <tag><c><![CDATA[{exit_status, ssh_channel_id(), integer() = ExitStatus}]]></c></tag> + <item> When the command running at the other end terminates, the + following message can be sent to return the exit status of the + command. A zero 'exit_status' usually means that the command + terminated successfully. This event is sent as result of calling + <seealso marker="#exit_status"> + ssh_connection:exit_status/3</seealso></item> + + <tag><c><![CDATA[{closed, ssh_channel_id()}]]></c></tag> + <item> This event is sent as result of calling + <seealso marker="#close">ssh_connection:close/2</seealso> Both the handling of this + event and sending of it will be taken care of by the + <seealso marker="ssh_channel">ssh_channel</seealso> behavior.</item> + + </taglist> + </item> - <section> - <title>MESSAGES SENT TO CHANNEL PROCESSES</title> + <tag><b>terminal_events()</b></tag> + + <item> + <p> Channels implementing a shell and command execution on the + server side should handle the following messages that may be sent by client channel processes. </p> + + <p><note>Events that includes a <c> WantReply</c> expects the event handling + process to call <seealso marker="#reply_request">ssh_connection:reply_request/4</seealso> + with the boolean value of <c> WantReply</c> as the second + argument. </note> </p> + + <taglist> + <tag><c><![CDATA[{env, ssh_channel_id(), boolean() = WantReply, + string() = Var, string() = Value}]]></c></tag> + <item> Environment variables may be passed to the shell/command + to be started later. This event is sent as result of calling <seealso + marker="#setenv"> ssh_connection:setenv/5</seealso> + </item> + + <tag><c><![CDATA[{pty, ssh_channel_id(), + boolean() = WantReply, {string() = Terminal, integer() = CharWidth, + integer() = RowHeight, integer() = PixelWidth, integer() = PixelHight, + [{atom() | integer() = Opcode, + integer() = Value}] = TerminalModes}}]]></c></tag> + <item>A pseudo-terminal has been requested for the + session. Terminal is the value of the TERM environment + variable value (e.g., vt100). Zero dimension parameters must + be ignored. The character/row dimensions override the pixel + dimensions (when nonzero). Pixel dimensions refer to the + drawable area of the window. The <c>Opcode</c> in the + <c>TerminalModes</c> list is the mnemonic name, represented + as an lowercase erlang atom, defined in + <url href="http://www.ietf.org/rfc/rfc4254.txt">RFC 4254 </url> section 8, + or the opcode if the mnemonic name is not listed in the + RFC. Example <c>OP code: 53, mnemonic name ECHO erlang atom: + echo</c>. There is currently no API function to generate this + event.</item> + + <tag><c><![CDATA[{shell, boolean() = WantReply}]]></c></tag> + <item> This message will request that the user's default shell + be started at the other end. This event is sent as result of calling <seealso + marker="#shell"> ssh_connection:shell/2</seealso> + </item> + + <tag><c><![CDATA[{window_change, ssh_channel_id(), integer() = CharWidth, + integer() = RowHeight, integer() = PixWidth, integer() = PixHeight}]]></c></tag> + <item> When the window (terminal) size changes on the client + side, it MAY send a message to the server side to inform it of + the new dimensions. There is currently no API function to generate this + event.</item> - <p>As a result of the ssh connection protocol messages on the form - <c><![CDATA[{ssh_cm, ssh_connection_ref(), term()}]]></c> - will be sent to a channel process. The term will contain - information regarding the ssh connection protocol event, - for details see the ssh channel behavior callback <seealso - marker="ssh_channel">handle_ssh_msg/2 </seealso> </p> - </section> - - <funcs> + <tag><c><![CDATA[{exec, ssh_channel_id(), + boolean() = WantReply, string() = Cmd}]]></c></tag> + <item> This message will request that the server starts + execution of the given command. This event is sent as result of calling <seealso + marker="#exec">ssh_connection:exec/4 </seealso> + </item> + </taglist> + </item> + </taglist> + </section> + + <funcs> <func> <name>adjust_window(ConnectionRef, ChannelId, NumOfBytes) -> ok</name> - <fsummary>Adjusts the ssh flowcontrol window. </fsummary> + <fsummary>Adjusts the SSH flowcontrol window. </fsummary> <type> <v> ConnectionRef = ssh_connection_ref() </v> <v> ChannelId = ssh_channel_id() </v> <v> NumOfBytes = integer()</v> </type> <desc> - <p>Adjusts the ssh flowcontrol window. </p> + <p>Adjusts the SSH flowcontrol window. This shall be done by both client and server side channel processes.</p> - <note><p>This will be taken care of by the ssh_channel - behavior when the callback <seealso marker="ssh_channel"> - handle_ssh_msg/2 </seealso> has returned after processing a - {ssh_cm, ssh_connection_ref(), {data, ssh_channel_id(), - ssh_data_type_code(), binary()}} - message, and should normally not be called explicitly.</p></note> + <note><p>Channels implemented with the <seealso marker="ssh_channel"> ssh_channel + behavior</seealso> will normaly not need to call this function as flow control + will be handled by the behavior. The behavior will adjust the window every time + the callback <seealso marker="ssh_channel#handled_ssh_msg-2"> + handle_ssh_msg/2 </seealso> has returned after processing channel data</p> </note> </desc> </func> @@ -98,20 +207,19 @@ <v> ChannelId = ssh_channel_id()</v> </type> <desc> - <p>Sends a close message on the channel <c>ChannelId</c> + <p>A server or client channel process can choose to close their session by sending a close event. </p> - <note><p>This function will be called by the ssh channel + <note><p>This function will be called by the ssh_channel behavior when the channel is terminated see <seealso - marker="ssh_channel"> ssh_channel(3) </seealso> and should - normally not be called explicitly.</p></note> + marker="ssh_channel"> ssh_channel(3) </seealso> so channels implemented with the + behavior should not call this function explicitly.</p></note> </desc> </func> <func> <name>exec(ConnectionRef, ChannelId, Command, TimeOut) -> ssh_request_status() </name> - <fsummary>Will request that the server start the - execution of the given command. </fsummary> + <fsummary>Request that the server start the execution of the given command. </fsummary> <type> <v> ConnectionRef = ssh_connection_ref() </v> <v> ChannelId = ssh_channel_id()</v> @@ -119,44 +227,39 @@ <v>Timeout = timeout() </v> </type> <desc> - <p>Will request that the server start the execution of the - given command, the result will be received as:</p> + <p>Should be called by a client channel process to request that the server starts execution of the + given command, the result will be several messages according to the following pattern. Note + that the last message will be a channel close message, as the exec request is a one time + execution that closes the channel when it is done.</p> <taglist> - <tag><c> N X {ssh_cm, - ssh_connection_ref(), {data, ssh_channel_id(), ssh_data_type_code(), - binary() = Data}} </c></tag> + <tag><c> N x {ssh_cm, ssh_connection_ref(), + {data, ssh_channel_id(), ssh_data_type_code(), binary() = Data}} </c></tag> <item>The result of executing the command may be only one line or thousands of lines depending on the command.</item> - <tag><c> 1 X {ssh_cm, ssh_connection_ref(), {eof, ssh_channel_id()}}</c></tag> + <tag><c>0 or 1 x {ssh_cm, ssh_connection_ref(), {eof, ssh_channel_id()}}</c></tag> <item>Indicates that no more data will be sent.</item> - <tag><c>0 or 1 X {ssh_cm, + <tag><c>0 or 1 x {ssh_cm, ssh_connection_ref(), {exit_signal, ssh_channel_id(), string() = ExitSignal, string() = ErrorMsg, string() = LanguageString}}</c></tag> <item>Not all systems send signals. For details on valid string values see RFC 4254 section 6.10 </item> - <tag><c>0 or 1 X {ssh_cm, ssh_connection_ref(), {exit_status, + <tag><c>0 or 1 x {ssh_cm, ssh_connection_ref(), {exit_status, ssh_channel_id(), integer() = ExitStatus}}</c></tag> <item>It is recommended by the <c>ssh connection protocol</c> that this message shall be sent, but that may not always be the case.</item> - <tag><c> 1 X {ssh_cm, ssh_connection_ref(), + <tag><c> 1 x {ssh_cm, ssh_connection_ref(), {closed, ssh_channel_id()}}</c></tag> <item>Indicates that the ssh channel started for the execution of the command has now been shutdown.</item> </taglist> - - <p> These message should be handled by the - client. The <seealso marker="ssh_channel">ssh channel - behavior</seealso> can be used when writing a client. - </p> </desc> </func> - <func> <name>exit_status(ConnectionRef, ChannelId, Status) -> ok</name> <fsummary>Sends the exit status of a command to the client.</fsummary> @@ -166,12 +269,12 @@ <v> Status = integer()</v> </type> <desc> - <p>Sends the exit status of a command to the client.</p> + <p>Should be called by a server channel process to sends the exit status of a command to the client.</p> </desc> - </func> + </func> <func> - <name>reply_request(ConnectionRef, WantReply, Status, CannelId) -> ok</name> + <name>reply_request(ConnectionRef, WantReply, Status, ChannelId) -> ok</name> <fsummary>Send status replies to requests that want such replies. </fsummary> <type> <v> ConnectionRef = ssh_connection_ref() </v> @@ -183,10 +286,9 @@ <p>Sends status replies to requests where the requester has stated that they want a status report e.i .<c> WantReply = true</c>, if <c> WantReply</c> is false calling this function will be a - "noop". Should be called after handling an ssh connection + "noop". Should be called while handling an ssh connection protocol message containing a <c>WantReply</c> boolean - value. See the ssh_channel behavior callback <seealso - marker="ssh_channel"> handle_ssh_msg/2 </seealso> + value. </p> </desc> </func> @@ -206,7 +308,7 @@ <v> Timeout = timeout()</v> </type> <desc> - <p>Sends channel data. + <p>Should be called by client- and server channel processes to send data to each other. </p> </desc> </func> @@ -228,9 +330,7 @@ <name>session_channel(ConnectionRef, Timeout) -> </name> <name>session_channel(ConnectionRef, InitialWindowSize, MaxPacketSize, Timeout) -> {ok, ssh_channel_id()} | {error, Reason}</name> - <fsummary>Opens a channel for a ssh session. A session is a - remote execution of a program. The program may be a shell, an - application, a system command, or some built-in subsystem. </fsummary> + <fsummary>Opens a channel for a ssh session. </fsummary> <type> <v> ConnectionRef = ssh_connection_ref()</v> <v> InitialWindowSize = integer() </v> @@ -239,9 +339,8 @@ <v> Reason = term() </v> </type> <desc> - <p>Opens a channel for a ssh session. A session is a - remote execution of a program. The program may be a shell, an - application, a system command, or some built-in subsystem. + <p>Opens a channel for an SSH session. The channel id returned from this function + is the id used as input to the other funtions in this module. </p> </desc> </func> @@ -258,8 +357,8 @@ <v> Timeout = timeout()</v> </type> <desc> - <p> Environment variables may be passed to the shell/command to be - started later. + <p> Environment variables may be passed before starting the + shell/command. Should be called by a client channel processes. </p> </desc> </func> @@ -267,17 +366,16 @@ <func> <name>shell(ConnectionRef, ChannelId) -> ssh_request_status() </name> - <fsummary> Will request that the user's default shell (typically - defined in /etc/passwd in UNIX systems) be started at the other + <fsummary> Requests that the user's default shell (typically + defined in /etc/passwd in UNIX systems) shall be executed at the server end. </fsummary> <type> <v> ConnectionRef = ssh_connection_ref() </v> <v> ChannelId = ssh_channel_id()</v> </type> <desc> - <p> Will request that the user's default shell (typically - defined in /etc/passwd in UNIX systems) be started at the - other end. + <p> Should be called by a client channel process to request that the user's default shell (typically + defined in /etc/passwd in UNIX systems) shall be executed at the server end. </p> </desc> </func> @@ -292,7 +390,7 @@ <v> Timeout = timeout()</v> </type> <desc> - <p> Sends a request to execute a predefined subsystem. + <p> Should be called by a client channel process for requesting to execute a predefined subsystem on the server. </p> </desc> </func> diff --git a/lib/ssh/doc/src/ssh_protocol.xml b/lib/ssh/doc/src/ssh_protocol.xml new file mode 100644 index 0000000000..6a253c43eb --- /dev/null +++ b/lib/ssh/doc/src/ssh_protocol.xml @@ -0,0 +1,150 @@ +<?xml version="1.0" encoding="iso-8859-1" ?> +<!DOCTYPE chapter SYSTEM "chapter.dtd"> +<!-- %EricssonCopyright% --> +<chapter> + <header> + <copyright> + <year>2012</year> + <holder>Ericsson AB. All Rights Reserved.</holder> + </copyright> + <legalnotice> + The program may be used and/or copied only with the written permission from + Ericsson AB, or in accordance with the terms and conditions stipulated in + the agreement/contract under which the program has been supplied. + </legalnotice> + <title>Secure Shell (SSH)</title> + <prepared>OTP</prepared> + <date></date> + <rev>%VSN%</rev> + <file>ssh_protocol.xml</file> + </header> + + <section> + <title>SSH Protocol Overview</title> + + <p> Conceptually the SSH protocol can be partitioned into four + layers:</p> + + <image file="SSH_protocols.png"> + <icaption>SSH Protocol Architecture</icaption> + </image> + + <section> + <title>Transport Protocol</title> + + <p> The SSH Transport Protocol is a secure, low level transport. + It provides strong encryption, cryptographic host + authentication and integrity protection. Currently, only a + minimum of MAC- (message authentication code, a short piece of + information used to authenticate a message) and encryption + algorithms are supported see <seealso marker="ssh">ssh(3)</seealso> + </p> + </section> + + <section> + <title>Authentication Protocol</title> + + <p>The SSH authentication protocol is a general-purpose user + authentication protocol run over the SSH transport + protocol. Erlang SSH supports user authentication using public + key technology (RSA and DSA, X509-certificates are currently not + supported). It is also possible to use a so called keyboard + interactive authentication. This method is suitable for + interactive authentication methods that do not need any special + software support on the client side. Instead, all authentication + data should be entered via the keyboard. It is also possible + to use a pure password based authentication scheme, note that in + this case the the plain text password will be encrypted before sent + over the network. There are several configuration options for + authentication handling available in + <seealso marker="ssh#connect-3">ssh:connect/[3,4]</seealso> + and <seealso marker="ssh#daemon-2">ssh:daemon/[2,3]</seealso> + It is also possible to customize the public key handling + by implementing the behaviours <seealso + marker="ssh_client_key_api">ssh_client_key_api</seealso> and + <seealso + marker="ssh_server_key_api">ssh_server_key_api</seealso> + </p> + </section> + + <section> + <title>Connection Protocol</title> + + <p>The SSH Connection Protocol provides application-support + services over the transport pipe, such as channel multiplexing, + flow control, remote program execution, signal propagation, + connection forwarding, etc. Functions for handling the SSH + Connection Protocol can be found in the module <seealso + marker="ssh_connection">ssh_connection</seealso>. + </p> + </section> + + <section> + <title>Channels</title> + + <p>All terminal sessions, forwarded connections etc., are + channels. Multiple channels are multiplexed into a single + connection, and all channels are flow-controlled. Typically an + SSH client will open a channel, send data/commands, receive + data/"control information" and when it is done close the + channel. The <seealso + marker="ssh_channel">ssh_channel</seealso> behaviour makes it easy to + write your own SSH client/server processes that use flow + control. It handles generic parts of SSH channel management and + lets you focus on the application logic. + </p> + + <p>Channels comes in three flavors</p> + + <list type="bulleted"> + <item><em>Subsystem</em> - named services that can be run as + part of an SSH server such as SFTP <seealso + marker="ssh_sftpd">ssh_sftpd</seealso>, that is built in to the + SSH daemon (server) by default but may be disabled. The Erlang SSH + daemon may be configured to run any Erlang + implemented SSH subsystem. + </item> + <item><em>Shell</em> - interactive shell. By default the + Erlang daemon will run the Erlang shell. It is + possible to customize the shell by providing your own + read-eval-print loop. It is also possible, but much more work, + to provide your own CLI (Command Line Interface) implementation. + </item> + <item><em>Exec</em> - one-time remote execution (like + SCP). See <seealso + marker="ssh_connection#exec-4">ssh_connection:exec/4</seealso></item> + </list> + </section> + + <p>Channels are flow controlled. No data may be sent to a channel + peer until a message is received to indicate that window space is + available. The 'initial window size' specifies how many bytes of + channel data that can be sent to the channel peer without adjusting the + window. + </p> + + <p> + For more detailed information about the SSH protocol, see the + following RFCs: + </p> + + <list type="bulleted"> + <item><url href="http://www.ietf.org/rfc/rfc4250.txt">RFC 4250</url> - + Protocol Assigned Numbers.</item> + <item><url href="http://www.ietf.org/rfc/rfc4251.txt">RFC 4251</url> - + Protocol Architecture.</item> + <item><url href="http://www.ietf.org/rfc/rfc4252.txt">RFC 4252</url> - + Authentication Protocol.</item> + <item><url href="http://www.ietf.org/rfc/rfc4253.txt">RFC 4253</url> - + Transport Layer Protocol.</item> + <item><url href="http://www.ietf.org/rfc/rfc4254.txt">RFC 4254</url> - + Connection Protocol.</item> + <item><url href="http://www.ietf.org/rfc/rfc4255.txt">RFC 4255</url> - + Key Fingerprints.</item> + <item><url href="http://www.ietf.org/rfc/rfc4344.txt">RFC 4344</url> - + Transport Layer Encryption Modes.</item> + <item><url href="http://www.ietf.org/rfc/rfc4716.txt">RFC 4716</url> - + Public Key File Format.</item> + </list> + </section> +</chapter> diff --git a/lib/ssh/doc/src/ssh_server_key_api.xml b/lib/ssh/doc/src/ssh_server_key_api.xml new file mode 100644 index 0000000000..78ff105387 --- /dev/null +++ b/lib/ssh/doc/src/ssh_server_key_api.xml @@ -0,0 +1,90 @@ +<?xml version="1.0" encoding="iso-8859-1" ?> +<!DOCTYPE erlref SYSTEM "erlref.dtd"> + +<erlref> + <header> + <copyright> + <year>2012</year> + <holder>Ericsson AB, All Rights Reserved</holder> + </copyright> + <legalnotice> + The contents of this file are subject to the Erlang Public License, + Version 1.1, (the "License"); you may not use this file except in + compliance with the License. You should have received a copy of the + Erlang Public License along with this software. If not, it can be + retrieved online at http://www.erlang.org/. + + Software distributed under the License is distributed on an "AS IS" + basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + the License for the specific language governing rights and limitations + under the License. + + The Initial Developer of the Original Code is Ericsson AB. + </legalnotice> + <title>ssh_server_key_api</title> + </header> + <module>ssh_server_key_api</module> + <modulesummary> + -behaviour(ssh_server_key_api). + </modulesummary> + <description> + <p> Behaviour describing the API for an SSH server's public key handling.By implementing the callbacks defined + in this behavior it is possible to customize the SSH server's public key + handling. By default the SSH application implements this behavior + with help of the standard openssh files, see <seealso marker="SSH_app"> ssh(6)</seealso>.</p> + </description> + + <section> + <title>DATA TYPES </title> + + <p>Type definitions that are used more than once in this module + and/or abstractions to indicate the intended use of the data + type:</p> + + <p> boolean() = true | false</p> + <p> string() = [byte()]</p> + <p> public_key() = #'RSAPublicKey'{}| {integer(), #'Dss-Parms'{}}| term()</p> + <p> private_key() = #'RSAPublicKey'{}| {integer(), #'Dss-Parms'{}}| term()</p> + <p> public_key_algorithm() = 'ssh-rsa'| 'ssh-dss' | atom()</p> + </section> + + <funcs> + <func> + <name>Module:host_key(Algorithm, DaemonOptions) -> + {ok, Key} | {error, Reason}</name> + <fsummary>Fetches the hosts private key </fsummary> + <type> + <v>Algorithm = public_key_algorithm()</v> + <d> Host key algorithm. Should support 'ssh-rsa'| 'ssh-dss' but additional algorithms + can be handled.</d> + <v> DaemonOptions = proplists:proplist() </v> + <d>Options provided to <seealso marker="ssh#daemon">ssh:daemon/[2,3]</seealso></d> + <v> Key = private_key()</v> + <d> The private key of the host matching the <c>Algorithm</c></d> + <v>Reason = term() </v> + </type> + <desc> + <p>Fetches the hosts private key</p> + </desc> + </func> + + <func> + <name>Module:is_auth_key(Key, User, DaemonOptions) -> Result</name> + <fsummary> Checks if the user key is authorized</fsummary> + <type> + <v> Key = public_key() </v> + <d> Normally an RSA or DSA public key but handling of other public keys can be added</d> + <v> User = string()</v> + <d> The user owning the public key</d> + <v> DaemonOptions = proplists:proplist() </v> + <d> Options provided to <seealso marker="ssh#daemon">ssh:daemon/[2,3]</seealso></d> + <v> Result = boolean()</v> + </type> + <desc> + <p> Checks if the user key is authorized </p> + </desc> + </func> + + </funcs> + +</erlref> diff --git a/lib/ssh/doc/src/ssh_sftp.xml b/lib/ssh/doc/src/ssh_sftp.xml index c1f75461b1..0d61e57edb 100644 --- a/lib/ssh/doc/src/ssh_sftp.xml +++ b/lib/ssh/doc/src/ssh_sftp.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="iso-8859-1" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>2005</year><year>2010</year> + <year>2005</year><year>2012</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -22,25 +22,20 @@ </legalnotice> <title>ssh_sftp</title> - <prepared>Jakob Cederlund</prepared> - <responsible></responsible> - <docno>1</docno> - <approved></approved> - <checked></checked> + <prepared>OTP</prepared> <date>2005-09-22</date> - <rev>PA1</rev> <file>ssh_sftp.sgml</file> </header> <module>ssh_sftp</module> <modulesummary>SFTP client.</modulesummary> <description> <p>This module implements an SFTP (SSH FTP) client. SFTP is a - secure, encrypted file transfer service available for - SSH.</p> + secure, encrypted file transfer service available for + SSH.</p> </description> <section> - <title>COMMON DATA TYPES </title> + <title>DATA TYPES </title> <p>Type definitions that are used more than once in this module and/or abstractions to indicate the intended use of the data type: </p> @@ -51,8 +46,8 @@ <section> <title>TIMEOUTS </title> - <p>If the request functions for the sftp channel return {error, timeout} - it does not mean that the request did not reach the server and was + <p>If the request functions for the SFTP channel return {error, timeout} + it does not guarantee that the request did not reach the server and was not performed, it only means that we did not receive an answer from the server within the time that was expected.</p> </section> @@ -64,7 +59,7 @@ <name>start_channel(Host, Options) -></name> <name>start_channel(Host, Port, Options) -> {ok, Pid} | {ok, Pid, ConnectionRef} | {error, Reason}</name> - <fsummary>Starts a sftp client</fsummary> + <fsummary>Starts a SFTP client</fsummary> <type> <v>Host = string()</v> <v>ConnectionRef = ssh_connection_ref()</v> @@ -73,11 +68,11 @@ <v>Reason = term()</v> </type> <desc> - <p>If not provided, setups a ssh connection in this case a - connection reference will be returned too. A ssh channel - process is started to handle the communication with the SFTP - server, the returned pid for this process should be used as - input to all other API functions in this module.</p> + <p>If no connection reference is provided, a connection is set + up and the new connection is returned. An SSH channel process + is started to handle the communication with the SFTP server. + The returned pid for this process should be used as input to + all other API functions in this module.</p> <p>Options are:</p> <taglist> @@ -95,13 +90,13 @@ <func> <name>stop_channel(ChannelPid) -> ok</name> - <fsummary>Stops the sftp client channel.</fsummary> + <fsummary>Stops the SFTP client channel.</fsummary> <type> <v>ChannelPid = pid()</v> </type> <desc> - <p>Stops a sftp channel. If the ssh connection should be closed - call <seealso marker="ssh">ssh:close/1</seealso>.</p> + <p>Stops an SFTP channel. Does not close the SSH connetion. + Use <seealso marker="ssh">ssh:close/1</seealso> to close it.</p> </desc> </func> @@ -133,8 +128,9 @@ <v>Reason = term()</v> </type> <desc> - <p>Writes a file to the server, like <c><![CDATA[file:write_file/2]]></c>. - The file is created if it's not there.</p> + <p>Writes a file to the server, like + <c><![CDATA[file:write_file/2]]></c>. The file is created if + it does not exist or is owerwritten if it does.</p> </desc> </func> <func> @@ -169,7 +165,7 @@ </type> <desc> <p>Opens a file on the server, and returns a handle that - is used for reading or writing.</p> + can be used for reading or writing.</p> </desc> </func> <func> @@ -184,7 +180,7 @@ </type> <desc> <p>Opens a handle to a directory on the server, the handle - is used for reading directory contents.</p> + can be used for reading directory contents.</p> </desc> </func> <func> @@ -218,7 +214,7 @@ </type> <desc> <p>Reads <c><![CDATA[Len]]></c> bytes from the file referenced by - <c><![CDATA[Handle]]></c>. Returns <c><![CDATA[{ok, Data}]]></c>, or <c><![CDATA[eof]]></c>, or + <c><![CDATA[Handle]]></c>. Returns <c><![CDATA[{ok, Data}]]></c>, <c><![CDATA[eof]]></c>, or <c><![CDATA[{error, Reason}]]></c>. If the file is opened with <c><![CDATA[binary]]></c>, <c><![CDATA[Data]]></c> is a binary, otherwise it is a string.</p> <p>If the file is read past eof, only the remaining bytes @@ -267,9 +263,9 @@ <v>Reason = term()</v> </type> <desc> - <p>Write <c><![CDATA[data]]></c> to the file referenced by <c><![CDATA[Handle]]></c>. + <p>Writes<c><![CDATA[data]]></c> to the file referenced by <c><![CDATA[Handle]]></c>. The file should be opened with <c><![CDATA[write]]></c> or <c><![CDATA[append]]></c> - flag. Returns <c><![CDATA[ok]]></c> if successful and <c><![CDATA[{error, Reason}]]></c> + flag. Returns <c><![CDATA[ok]]></c> if successful or S<c><![CDATA[{error, Reason}]]></c> otherwise.</p> <p>Typical error reasons are:</p> <taglist> @@ -317,14 +313,14 @@ <v>ChannelPid = pid()</v> <v>Handle = term()</v> <v>Location = Offset | {bof, Offset} | {cur, Offset} | {eof, Offset} | bof | cur | eof</v> - <v>Offset = int()</v> + <v>Offset = integer()</v> <v>Timeout = timeout()</v> <v>NewPosition = integer()</v> <v>Reason = term()</v> </type> <desc> <p>Sets the file position of the file referenced by <c><![CDATA[Handle]]></c>. - Returns <c><![CDATA[{ok, NewPosition]]></c> (as an absolute offset) if + Returns <c><![CDATA[{ok, NewPosition}]]></c> (as an absolute offset) if successful, otherwise <c><![CDATA[{error, Reason}]]></c>. <c><![CDATA[Location]]></c> is one of the following:</p> <taglist> @@ -413,7 +409,7 @@ <v>Reason = term()</v> </type> <desc> - <p>Read the link target from the symbolic link specified + <p>Reads the link target from the symbolic link specified by <c><![CDATA[name]]></c>, like <c><![CDATA[file:read_link/1]]></c>.</p> </desc> </func> @@ -490,8 +486,9 @@ <v>Reason = term()</v> </type> <desc> - <p>Deletes a directory specified by <c><![CDATA[Name]]></c>. The directory - should be empty.</p> + <p>Deletes a directory specified by <c><![CDATA[Name]]></c>. + Note that the directory must be empty before it can be successfully deleted + </p> </desc> </func> diff --git a/lib/ssh/doc/src/ssh_sftpd.xml b/lib/ssh/doc/src/ssh_sftpd.xml index b3d64e72b4..a4273195b5 100644 --- a/lib/ssh/doc/src/ssh_sftpd.xml +++ b/lib/ssh/doc/src/ssh_sftpd.xml @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="iso-8859-1" ?> <!DOCTYPE erlref SYSTEM "erlref.dtd"> <erlref> <header> <copyright> - <year>2005</year><year>2010</year> + <year>2005</year><year>2012</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -22,23 +22,17 @@ </legalnotice> <title>ssh_sftpd</title> - <prepared>Ingela Anderton Andin</prepared> - <responsible></responsible> - <docno>1</docno> - <approved></approved> - <checked></checked> <date>2005-09-22</date> - <rev>PA1</rev> <file>ssh_sftpd.sgml</file> </header> <module>ssh_sftpd</module> - <modulesummary>Specifies a channel process to handle a sftp subsystem.</modulesummary> + <modulesummary>Specifies the channel process to handle an sftp subsystem.</modulesummary> <description> <p>Specifies a channel process to handle a sftp subsystem.</p> </description> <section> - <title>COMMON DATA TYPES </title> + <title>DATA TYPES </title> <p><c>subsystem_spec() = {subsystem_name(), {channel_callback(), channel_init_args()}} </c></p> <p><c>subsystem_name() = "sftp"</c></p> <p><c>channel_callback() = atom()</c> - Name of the erlang module implementing the @@ -65,28 +59,28 @@ </item> <tag><c><![CDATA[{file_handler, CallbackModule}]]></c></tag> <item> - <p>Determines which module to call for communicating with - the file server. Default value is <c>ssh_sftpd_file</c> that uses the - file and filelib API:s to access the standard OTP file - server. This option may be used to plug in the use of - other file servers.</p> - </item> - <tag><c><![CDATA[{max_files, Integer}]]></c></tag> - <item> - <p>The default value is <c>0</c>, which means that there is no upper limit. - If supplied, the number of filenames returned to the sftp client per <c>READDIR</c> - request, is limited to at most the given value.</p> - </item> + <p>Determines which module to call for accessing + the file server. The default value is <c>ssh_sftpd_file</c> that uses the + <seealso marker="kernel#file">file</seealso> and <seealso marker="kernel#filelib">filelib</seealso> API:s to access the standard OTP file + server. This option may be used to plug in + other file servers.</p> + </item> + <tag><c><![CDATA[{max_files, Integer}]]></c></tag> + <item> + <p>The default value is <c>0</c>, which means that there is no upper limit. + If supplied, the number of filenames returned to the sftp client per <c>READDIR</c> + request is limited to at most the given value.</p> + </item> <tag><c><![CDATA[{root, String}]]></c></tag> <item> <p>Sets the sftp root directory. The user will then not be - able to see any files above this root. If for instance - the root is set to <c>/tmp</c> the user will see this - directory as <c>/</c> and if the user does cd <c>/etc</c> - the user will end up in <c>/tmp/etc</c>. + able to see any files above this root. If for instance + the root is set to <c>/tmp</c> the user will see this + directory as <c>/</c> and if the user does cd <c>/etc</c> + the user will end up in <c>/tmp/etc</c>. </p> </item> - </taglist> + </taglist> </desc> </func> </funcs> diff --git a/lib/ssh/doc/src/user_guide.gif b/lib/ssh/doc/src/user_guide.gif Binary files differdeleted file mode 100644 index e6275a803d..0000000000 --- a/lib/ssh/doc/src/user_guide.gif +++ /dev/null diff --git a/lib/ssh/doc/src/usersguide.xml b/lib/ssh/doc/src/usersguide.xml new file mode 100644 index 0000000000..c818003090 --- /dev/null +++ b/lib/ssh/doc/src/usersguide.xml @@ -0,0 +1,37 @@ +<?xml version="1.0" encoding="iso-8859-1" ?> +<!DOCTYPE part SYSTEM "part.dtd"> + +<part xmlns:xi="http://www.w3.org/2001/XInclude"> + <header> + <copyright> + <year>2012</year> + <holder>Ericsson AB. All Rights Reserved.</holder> + </copyright> + <legalnotice> + The contents of this file are subject to the Erlang Public License, + Version 1.1, (the "License"); you may not use this file except in + compliance with the License. You should have received a copy of the + Erlang Public License along with this software. If not, it can be + retrieved online at http://www.erlang.org/. + + Software distributed under the License is distributed on an "AS IS" + basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + the License for the specific language governing rights and limitations + under the License. + + </legalnotice> + + <title>SSH User's Guide</title> + <prepared>OTP Team</prepared> + <date>2012-10-11</date> + <file>usersguide.xml</file> + </header> + <description> + <p>The <em>SSH</em> application implements the SSH (Secure Shell) protocol and + provides an SFTP (Secret File Transfer Protocol) client and server. + </p> + </description> + <xi:include href="introduction.xml"/> + <xi:include href="ssh_protocol.xml"/> + <xi:include href="using_ssh.xml"/> +</part> diff --git a/lib/ssh/doc/src/using_ssh.xml b/lib/ssh/doc/src/using_ssh.xml new file mode 100644 index 0000000000..1a54f3f964 --- /dev/null +++ b/lib/ssh/doc/src/using_ssh.xml @@ -0,0 +1,294 @@ +<?xml version="1.0" encoding="iso-8859-1" ?> +<!DOCTYPE chapter SYSTEM "chapter.dtd"> + +<chapter> + <header> + <copyright> + <year>2012</year> + <holder>Ericsson AB. All Rights Reserved.</holder> + </copyright> + <legalnotice> + The contents of this file are subject to the Erlang Public License, + Version 1.1, (the "License"); you may not use this file except in + compliance with the License. You should have received a copy of the + Erlang Public License along with this software. If not, it can be + retrieved online at http://www.erlang.org/. + + Software distributed under the License is distributed on an "AS IS" + basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See + the License for the specific language governing rights and limitations + under the License. + + </legalnotice> + + <title>Getting started</title> + <file>using_ssh.xml</file> + </header> + + <section> + <title> General information</title> + <p>The examples in the following sections use the utility function + <seealso marker="ssh#start"> ssh:start/0 </seealso> that starts + all needed applications (crypto, public_key and ssh). All examples + are run in an Erlang shell, or in a bash shell using openssh to + illustrate how the erlang ssh application can be used. The + exampels are run as the user otptest on a local network where the + user is authorized to login in over ssh to the host "tarlop". If + nothing else is stated it is persumed that the otptest user has an + entry in tarlop's authorized_keys file (may log in via ssh without + entering a password). Also tarlop is a known host in the user + otptest's known_hosts file so that host verification can be done + without user interaction. + </p> + </section> + + <section> + <title>Using the Erlang SSH Terminal Client</title> + + <p>The user otptest, that has bash as default shell, uses the + ssh:shell/1 client to connect to the openssh daemon running on a + host called tarlop. Note that currently this client is very simple + and you should not be expected to be as fancy as the openssh + client.</p> + + <code type="erl" > + 1> ssh:start(). + ok + 2> {ok, S} = ssh:shell("tarlop"). + >pwd + /home/otptest + >exit + logout + 3> + </code> + </section> + + <section> + <title>Running an Erlang SSH Daemon </title> + + <p> The option system_dir must be a directory containing a host + key file and it defaults to /etc/ssh. For details see section + Configuration Files in <seealso + marker="ssh_app">ssh(6)</seealso>. + </p> + + <note><p>Normally the /etc/ssh directory is only readable by root. </p> + </note> + + <p> The option user_dir defaults to the users ~/.ssh directory</p> + + <p>In the following example we generate new keys and host keys as + to be able to run the example without having root privilages</p> + + <code> + $bash> ssh-keygen -t rsa -f /tmp/ssh_daemon/ssh_host_rsa_key + [...] + $bash> ssh-keygen -t rsa -f /tmp/otptest_user/.ssh/id_rsa + [...] + </code> + + <p>Create the file /tmp/otptest_user/.ssh/authrized_keys and add the content + of /tmp/otptest_user/.ssh/id_rsa.pub Now we can do</p> + + <code type="erl"> + 1> ssh:start(). + ok + 2> {ok, Sshd} = ssh:daemon(8989, [{system_dir, "/tmp/ssh_daemon"}, + {user_dir, "/tmp/otptest_user/.ssh"}]). + {ok,<0.54.0>} + 3> + </code> + + <p>Use the openssh client from a shell to connect to the Erlang ssh daemon.</p> + + <code> + $bash> ssh tarlop -p 8989 -i /tmp/otptest_user/.ssh/id_rsa -o UserKnownHostsFile=/tmp/otptest_user/.ssh/known_hosts + The authenticity of host 'tarlop' can't be established. + RSA key fingerprint is 14:81:80:50:b1:1f:57:dd:93:a8:2d:2f:dd:90:ae:a8. + Are you sure you want to continue connecting (yes/no)? yes + Warning: Permanently added 'tarlop' (RSA) to the list of known hosts. + Eshell V5.10 (abort with ^G) + 1> + </code> + + <p>There are two ways of shutting down an SSH daemon</p> + + <p>1: Stops the listener, but leaves existing connections started by the listener up and running.</p> + + <code type="erl"> + 3> ssh:stop_listener(Sshd). + ok + 4> + </code> + + <p>2: Stops the listener and all connections started by the listener.</p> + + <code type="erl"> + 3> ssh:stop_daemon(Sshd) + ok + 4> + </code> + + </section> + + <section> + <title>One Time Execution</title> + + <p>In the following example the Erlang shell is the client process + that receives the channel replies. <note> If you run this example + in your environment you may get fewer or more messages back as + this depends on the OS and shell on the machine running the ssh + daemon. See also <seealso marker="ssh_connection#exec-4">ssh_connection:exec/4</seealso> + </note> + </p> + + <code type="erl" > + 1> ssh:start(). + ok + 2> {ok, ConnectionRef} = ssh:connect("tarlop", 22, []). + {ok,<0.57.0>} + 3>{ok, ChannelId} = ssh_connection:session_channel(ConnectionRef, infinity). + {ok,0} + 4> success = ssh_connection:exec(ConnectionRef, ChannelId, "pwd", infinity). + 5> flush(). + Shell got {ssh_cm,<0.57.0>,{data,0,0,<<"/home/otptest\n">>}} + Shell got {ssh_cm,<0.57.0>,{eof,0}} + Shell got {ssh_cm,<0.57.0>,{exit_status,0,0}} + Shell got {ssh_cm,<0.57.0>,{closed,0}} + ok + 6> + </code> + + <p>Note only the channel is closed the connection is still up and can handle other channels</p> + + <code type="erl" > + 6> {ok, NewChannelId} = ssh_connection:session_channel(ConnectionRef, infinity). + {ok,1} + ... + </code> + </section> + + <section> + <title>SFTP (SSH File Transport Protocol) server</title> + + <code type="erl" > + 1> ssh:start(). + ok + 2> ssh:daemon(8989, [{system_dir, "/tmp/ssh_daemon"}, {user_dir, "/tmp/otptest_user/.ssh"}, + {subsystems, [ssh_sftpd:subsystem_spec([{cwd, "/tmp/sftp/example"}])]}]). + {ok,<0.54.0>} + 3> + </code> + + <p> Run the openssh sftp client</p> + + <code type="erl"> + $bash> sftp -oPort=8989 -o IdentityFile=/tmp/otptest_user/.ssh/id_rsa -o UserKnownHostsFile=/tmp/otptest_user/.ssh/known_hosts tarlop + Connecting to tarlop... + sftp> pwd + Remote working directory: /tmp/sftp/example + sftp> + </code> + </section> + + <section> + <title>SFTP (SSH File Transport Protocol) client</title> + + <code type="erl" > + 1> ssh:start(). + ok + 2> {ok, ChannelPid, Connection} = ssh_sftp:start_channel("tarlop", []). + {ok,<0.57.0>,<0.51.0>} + 3> ssh_sftp:read_file(ChannelPid, "/home/otptest/test.txt"). + {ok,<<"This is a test file\n">>} + </code> + </section> + + <section> + <title>Creating a subsystem</title> + + <p>A very small SSH subsystem that echos N bytes could be implemented like this. + See also <seealso marker="ssh_channel"> ssh_channel(3)</seealso> </p> + + <code type="erl" > +-module(ssh_echo_server). +-behaviour(ssh_subsystem). +-record(state, { + n, + id, + cm + }). +-export([init/1, handle_msg/2, handle_ssh_msg/2, terminate/2]). + +init([N]) -> + {ok, #state{n = N}}. + +handle_msg({ssh_channel_up, ChannelId, ConnectionManager}, State) -> + {ok, State#state{id = ChannelId, + cm = ConnectionManager}}. + +handle_ssh_msg({ssh_cm, CM, {data, ChannelId, 0, Data}}, #state{n = N} = State) -> + M = N - size(Data), + case M > 0 of + true -> + ssh_connection:send(CM, ChannelId, Data), + {ok, State#state{n = M}}; + false -> + <<SendData:N/binary, _/binary>> = Data, + ssh_connection:send(CM, ChannelId, SendData), + ssh_connection:send_eof(CM, ChannelId), + {stop, ChannelId, State} + end; +handle_ssh_msg({ssh_cm, _ConnectionManager, + {data, _ChannelId, 1, Data}}, State) -> + error_logger:format(standard_error, " ~p~n", [binary_to_list(Data)]), + {ok, State}; + +handle_ssh_msg({ssh_cm, _ConnectionManager, {eof, _ChannelId}}, State) -> + {ok, State}; + +handle_ssh_msg({ssh_cm, _, {signal, _, _}}, State) -> + %% Ignore signals according to RFC 4254 section 6.9. + {ok, State}; + +handle_ssh_msg({ssh_cm, _, {exit_signal, ChannelId, _, _Error, _}}, + State) -> + {stop, ChannelId, State}; + +handle_ssh_msg({ssh_cm, _, {exit_status, ChannelId, _Status}}, State) -> + {stop, ChannelId, State}. + +terminate(_Reason, _State) -> + ok. + </code> + + <p>And run like this on the host tarlop with the keys generated in section 3.3</p> + + <code type="erl" > + 1> ssh:start(). + ok + 2> ssh:daemon(8989, [{system_dir, "/tmp/ssh_daemon"}, + {user_dir, "/tmp/otptest_user/.ssh"} + {subsystems, [{"echo_n", {ssh_echo_server, [10]}}]}]). + {ok,<0.54.0>} + 3> + </code> + + <code type="erl" > + 1> ssh:start(). + ok + 2>{ok, ConnectionRef} = ssh:connect("tarlop", 8989, [{user_dir, "/tmp/otptest_user/.ssh"}]). + {ok,<0.57.0>} + 3>{ok, ChannelId} = ssh_connection:session_channel(ConnectionRef, infinity). + 4> success = ssh_connection:subsystem(ConnectionRef, ChannelId, "echo_n", infinity). + 5> ok = ssh_connection:send(ConnectionRef, ChannelId, "0123456789", infinity). + 6> flush(). + {ssh_msg, <0.57.0>, {data, 0, 1, "0123456789"}} + {ssh_msg, <0.57.0>, {eof, 0}} + {ssh_msg, <0.57.0>, {closed, 0}} + 7> {error, closed} = ssh_connection:send(ConnectionRef, ChannelId, "10", infinity). + </code> + +</section> + +</chapter> diff --git a/lib/ssh/src/Makefile b/lib/ssh/src/Makefile index b8eecd3fa2..323f0af191 100644 --- a/lib/ssh/src/Makefile +++ b/lib/ssh/src/Makefile @@ -41,7 +41,9 @@ RELSYSDIR = $(RELEASE_PATH)/lib/ssh-$(VSN) BEHAVIOUR_MODULES= \ ssh_sftpd_file_api \ ssh_channel \ - ssh_key_api + ssh_subsystem \ + ssh_client_key_api \ + ssh_server_key_api MODULES= \ ssh \ diff --git a/lib/ssh/src/ssh.app.src b/lib/ssh/src/ssh.app.src index 316c09eb06..a0ba7cf7d9 100644 --- a/lib/ssh/src/ssh.app.src +++ b/lib/ssh/src/ssh.app.src @@ -10,6 +10,7 @@ ssh_auth, ssh_bits, ssh_cli, + ssh_client_key_api, ssh_channel, ssh_channel_sup, ssh_connection, @@ -21,13 +22,14 @@ sshd_sup, ssh_file, ssh_io, - ssh_key_api, ssh_math, ssh_no_io, + ssh_server_key_api, ssh_sftp, ssh_sftpd, ssh_sftpd_file, ssh_sftpd_file_api, + ssh_subsystem, ssh_subsystem_sup, ssh_sup, ssh_system_sup, @@ -35,7 +37,7 @@ ssh_userreg, ssh_xfer]}, {registered, []}, - {applications, [kernel, stdlib, crypto]}, + {applications, [kernel, stdlib, crypto, public_key]}, {env, []}, {mod, {ssh_app, []}}]}. diff --git a/lib/ssh/src/ssh.appup.src b/lib/ssh/src/ssh.appup.src index d08dbafc32..6ba32e018f 100644 --- a/lib/ssh/src/ssh.appup.src +++ b/lib/ssh/src/ssh.appup.src @@ -19,10 +19,12 @@ {"%VSN%", [ + {<<"2.1.1">>, [{restart_application, ssh}]}, {<<"2.1">>, [{load_module, ssh_sftpd_file_api, soft_purge, soft_purge, []}, {load_module, ssh_connection, soft_purge, soft_purge, []}, {load_module, ssh_connection_manager, soft_purge, soft_purge, []}, {load_module, ssh_auth, soft_purge, soft_purge, []}, + {load_module, ssh_connection_handler, soft_purge, soft_purge, []}, {load_module, ssh_channel, soft_purge, soft_purge, []}, {load_module, ssh_file, soft_purge, soft_purge, []}]}, {load_module, ssh, soft_purge, soft_purge, []}]}, @@ -30,14 +32,16 @@ {<<"1\\.*">>, [{restart_application, ssh}]} ], [ + {<<"2.1.1">>, [{restart_application, ssh}]}, {<<"2.1">>,[{load_module, ssh_sftpd_file_api, soft_purge, soft_purge, []}, {load_module, ssh_connection, soft_purge, soft_purge, []}, {load_module, ssh_connection_manager, soft_purge, soft_purge, []}, {load_module, ssh_auth, soft_purge, soft_purge, []}, + {load_module, ssh_connection_handler, soft_purge, soft_purge, []}, {load_module, ssh_channel, soft_purge, soft_purge, []}, {load_module, ssh_file, soft_purge, soft_purge, []}]}, {load_module, ssh, soft_purge, soft_purge, []}]}, {<<"2.0\\.*">>, [{restart_application, ssh}]}, {<<"1\\.*">>, [{restart_application, ssh}]} ] -}. +}.
\ No newline at end of file diff --git a/lib/ssh/src/ssh.erl b/lib/ssh/src/ssh.erl index 3395f73884..a3ba8148eb 100644 --- a/lib/ssh/src/ssh.erl +++ b/lib/ssh/src/ssh.erl @@ -41,19 +41,23 @@ %% %% Type = permanent | transient | temporary %% -%% Description: Starts the inets application. Default type +%% Description: Starts the ssh application. Default type %% is temporary. see application(3) %%-------------------------------------------------------------------- start() -> + application:start(crypto), + application:start(public_key), application:start(ssh). start(Type) -> + application:start(crypto, Type), + application:start(public_key, Type), application:start(ssh, Type). %%-------------------------------------------------------------------- %% Function: stop() -> ok %% -%% Description: Stops the inets application. +%% Description: Stops the ssh application. %%-------------------------------------------------------------------- stop() -> application:stop(ssh). @@ -76,10 +80,10 @@ connect(Host, Port, Options, Timeout) -> {error, _Reason} = Error -> Error; {SocketOptions, SshOptions} -> - DisableIpv6 = proplists:get_value(ip_v6_disabled, SshOptions, false), + DisableIpv6 = proplists:get_value(ipv6_disabled, SshOptions, false), Inet = inetopt(DisableIpv6), do_connect(Host, Port, [Inet | SocketOptions], - [{host, Host} | SshOptions], Timeout, DisableIpv6) + [{user_pid, self()}, {host, Host} | fix_idle_time(SshOptions)], Timeout, DisableIpv6) end. do_connect(Host, Port, SocketOptions, SshOptions, Timeout, DisableIpv6) -> @@ -91,30 +95,39 @@ do_connect(Host, Port, SocketOptions, SshOptions, Timeout, DisableIpv6) -> {ok, ConnectionSup} -> {ok, Manager} = ssh_connection_sup:connection_manager(ConnectionSup), - receive - {Manager, is_connected} -> - {ok, Manager}; - %% When the connection fails - %% ssh_connection_sup:connection_manager - %% might return undefined as the connection manager - %% could allready have terminated, so we will not - %% match the Manager in this case - {_, not_connected, {error, econnrefused}} when DisableIpv6 == false -> - do_connect(Host, Port, proplists:delete(inet6, SocketOptions), - SshOptions, Timeout, true); - {_, not_connected, {error, Reason}} -> - {error, Reason}; - {_, not_connected, Other} -> - {error, Other} - after Timeout -> - ssh_connection_manager:stop(Manager), - {error, timeout} - end + msg_loop(Manager, DisableIpv6, Host, Port, SocketOptions, SshOptions, Timeout) catch exit:{noproc, _} -> {error, ssh_not_started} end. - +msg_loop(Manager, DisableIpv6, Host, Port, SocketOptions, SshOptions, Timeout) -> + receive + {Manager, is_connected} -> + {ok, Manager}; + %% When the connection fails + %% ssh_connection_sup:connection_manager + %% might return undefined as the connection manager + %% could allready have terminated, so we will not + %% match the Manager in this case + {_, not_connected, {error, econnrefused}} when DisableIpv6 == false -> + do_connect(Host, Port, proplists:delete(inet6, SocketOptions), + SshOptions, Timeout, true); + {_, not_connected, {error, Reason}} -> + {error, Reason}; + {_, not_connected, Other} -> + {error, Other}; + {From, user_password} -> + Pass = io:get_password(), + From ! Pass, + msg_loop(Manager, DisableIpv6, Host, Port, SocketOptions, SshOptions, Timeout); + {From, question} -> + Answer = io:get_line(""), + From ! Answer, + msg_loop(Manager, DisableIpv6, Host, Port, SocketOptions, SshOptions, Timeout) + after Timeout -> + ssh_connection_manager:stop(Manager), + {error, timeout} + end. %%-------------------------------------------------------------------- %% Function: close(ConnectionRef) -> ok %% @@ -160,7 +173,7 @@ daemon(HostAddr, Port, Options0) -> _ -> Options0 end, - DisableIpv6 = proplists:get_value(ip_v6_disabled, Options0, false), + DisableIpv6 = proplists:get_value(ipv6_disabled, Options0, false), {Host, Inet, Options} = case HostAddr of any -> {ok, Host0} = inet:gethostname(), @@ -237,6 +250,13 @@ shell(Host, Port, Options) -> %%-------------------------------------------------------------------- %%% Internal functions %%-------------------------------------------------------------------- +fix_idle_time(SshOptions) -> + case proplists:get_value(idle_time, SshOptions) of + undefined -> + [{idle_time, infinity}|SshOptions]; + _ -> + SshOptions + end. start_daemon(Host, Port, Options, Inet) -> case handle_options(Options) of {error, _Reason} = Error -> @@ -248,7 +268,7 @@ start_daemon(Host, Port, Options, Inet) -> do_start_daemon(Host, Port, Options, SocketOptions) -> case ssh_system_sup:system_supervisor(Host, Port) of undefined -> - %% TODO: It would proably make more sense to call the + %% It would proably make more sense to call the %% address option host but that is a too big change at the %% monent. The name is a legacy name! try sshd_sup:start_child([{address, Host}, @@ -309,8 +329,6 @@ handle_option([{user_passwords, _} = Opt | Rest], SocketOptions, SshOptions) -> handle_option(Rest, SocketOptions, [handle_ssh_option(Opt) | SshOptions]); handle_option([{pwdfun, _} = Opt | Rest], SocketOptions, SshOptions) -> handle_option(Rest, SocketOptions, [handle_ssh_option(Opt) | SshOptions]); -handle_option([{user_auth, _} = Opt | Rest],SocketOptions, SshOptions ) -> - handle_option(Rest, SocketOptions, [handle_ssh_option(Opt) | SshOptions]); handle_option([{key_cb, _} = Opt | Rest], SocketOptions, SshOptions) -> handle_option(Rest, SocketOptions, [handle_ssh_option(Opt) | SshOptions]); handle_option([{role, _} = Opt | Rest], SocketOptions, SshOptions) -> @@ -328,7 +346,10 @@ handle_option([{disconnectfun, _} = Opt | Rest], SocketOptions, SshOptions) -> handle_option(Rest, SocketOptions, [handle_ssh_option(Opt) | SshOptions]); handle_option([{failfun, _} = Opt | Rest], SocketOptions, SshOptions) -> handle_option(Rest, SocketOptions, [handle_ssh_option(Opt) | SshOptions]); -handle_option([{ip_v6_disabled, _} = Opt | Rest], SocketOptions, SshOptions) -> +%%Backwards compatibility should not be underscore between ip and v6 in API +handle_option([{ip_v6_disabled, Value} | Rest], SocketOptions, SshOptions) -> + handle_option(Rest, SocketOptions, [handle_ssh_option({ipv6_disabled, Value}) | SshOptions]); +handle_option([{ipv6_disabled, _} = Opt | Rest], SocketOptions, SshOptions) -> handle_option(Rest, SocketOptions, [handle_ssh_option(Opt) | SshOptions]); handle_option([{transport, _} = Opt | Rest], SocketOptions, SshOptions) -> handle_option(Rest, SocketOptions, [handle_ssh_option(Opt) | SshOptions]); @@ -342,6 +363,12 @@ handle_option([{exec, _} = Opt | Rest], SocketOptions, SshOptions) -> handle_option(Rest, SocketOptions, [handle_ssh_option(Opt) | SshOptions]); handle_option([{auth_methods, _} = Opt | Rest], SocketOptions, SshOptions) -> handle_option(Rest, SocketOptions, [handle_ssh_option(Opt) | SshOptions]); +handle_option([{pref_public_key_algs, _} = Opt | Rest], SocketOptions, SshOptions) -> + handle_option(Rest, SocketOptions, [handle_ssh_option(Opt) | SshOptions]); +handle_option([{quiet_mode, _} = Opt|Rest], SocketOptions, SshOptions) -> + handle_option(Rest, SocketOptions, [handle_ssh_option(Opt) | SshOptions]); +handle_option([{idle_time, _} = Opt | Rest], SocketOptions, SshOptions) -> + handle_option(Rest, SocketOptions, [handle_ssh_option(Opt) | SshOptions]); handle_option([Opt | Rest], SocketOptions, SshOptions) -> handle_option(Rest, [handle_inet_option(Opt) | SocketOptions], SshOptions). @@ -355,8 +382,19 @@ handle_ssh_option({silently_accept_hosts, Value} = Opt) when Value == true; Valu Opt; handle_ssh_option({user_interaction, Value} = Opt) when Value == true; Value == false -> Opt; -handle_ssh_option({public_key_alg, Value} = Opt) when Value == ssh_rsa; Value == ssh_dsa -> +handle_ssh_option({public_key_alg, ssh_dsa}) -> + {public_key_alg, 'ssh-dss'}; +handle_ssh_option({public_key_alg, ssh_rsa}) -> + {public_key_alg, 'ssh-rsa'}; +handle_ssh_option({public_key_alg, Value} = Opt) when Value == 'ssh-rsa'; Value == 'ssh-dss' -> Opt; +handle_ssh_option({pref_public_key_algs, Value} = Opt) when is_list(Value), length(Value) >= 1 -> + case handle_pref_algs(Value, []) of + true -> + Opt; + _ -> + throw({error, {eoptions, Opt}}) + end; handle_ssh_option({connect_timeout, Value} = Opt) when is_integer(Value); Value == infinity -> Opt; handle_ssh_option({user, Value} = Opt) when is_list(Value) -> @@ -371,8 +409,6 @@ handle_ssh_option({user_passwords, Value} = Opt) when is_list(Value)-> Opt; handle_ssh_option({pwdfun, Value} = Opt) when is_function(Value) -> Opt; -handle_ssh_option({user_auth, Value} = Opt) when is_function(Value) -> - Opt; handle_ssh_option({key_cb, Value} = Opt) when is_atom(Value) -> Opt; handle_ssh_option({compression, Value} = Opt) when is_atom(Value) -> @@ -391,7 +427,8 @@ handle_ssh_option({disconnectfun , Value} = Opt) when is_function(Value) -> Opt; handle_ssh_option({failfun, Value} = Opt) when is_function(Value) -> Opt; -handle_ssh_option({ip_v6_disabled, Value} = Opt) when Value == true; + +handle_ssh_option({ipv6_disabled, Value} = Opt) when Value == true; Value == false -> Opt; handle_ssh_option({transport, {Protocol, Cb, ClosTag}} = Opt) when is_atom(Protocol), @@ -407,6 +444,11 @@ handle_ssh_option({shell, {Module, Function, _}} = Opt) when is_atom(Module), Opt; handle_ssh_option({shell, Value} = Opt) when is_function(Value) -> Opt; +handle_ssh_option({quiet_mode, Value} = Opt) when Value == true; + Value == false -> + Opt; +handle_ssh_option({idle_time, Value} = Opt) when is_integer(Value), Value > 0 -> + Opt; handle_ssh_option(Opt) -> throw({error, {eoptions, Opt}}). @@ -415,7 +457,7 @@ handle_inet_option({active, _} = Opt) -> "and activ is handled internaly user is not allowd" "to specify this option"}}); handle_inet_option({inet, _} = Opt) -> - throw({error, {{eoptions, Opt},"Is set internaly use ip_v6_disabled to" + throw({error, {{eoptions, Opt},"Is set internaly use ipv6_disabled to" " enforce iv4 in the server, client will fallback to ipv4 if" " it can not use ipv6"}}); handle_inet_option({reuseaddr, _} = Opt) -> @@ -424,12 +466,27 @@ handle_inet_option({reuseaddr, _} = Opt) -> %% Option verified by inet handle_inet_option(Opt) -> Opt. - +%% Check preferred algs +handle_pref_algs([], Acc) -> + {true, lists:reverse(Acc)}; +handle_pref_algs([H|T], Acc) -> + case H of + ssh_dsa -> + handle_pref_algs(T, ['ssh-dss'| Acc]); + ssh_rsa -> + handle_pref_algs(T, ['ssh-rsa'| Acc]); + 'ssh-dss' -> + handle_pref_algs(T, ['ssh-dss'| Acc]); + 'ssh-rsa' -> + handle_pref_algs(T, ['ssh-rsa'| Acc]); + _ -> + false + end. %% Has IPv6 been disabled? inetopt(true) -> inet; inetopt(false) -> - case gen_tcp:listen(0, [inet6, {ip, loopback}]) of + case gen_tcp:listen(0, [inet6]) of {ok, Dummyport} -> gen_tcp:close(Dummyport), inet6; diff --git a/lib/ssh/src/ssh_auth.erl b/lib/ssh/src/ssh_auth.erl index aa452a8e09..cb0c7751f0 100644 --- a/lib/ssh/src/ssh_auth.erl +++ b/lib/ssh/src/ssh_auth.erl @@ -48,17 +48,18 @@ publickey_msg([Alg, #ssh{user = User, case KeyCb:user_key(Alg, Opts) of {ok, Key} -> + StrAlgo = algorithm_string(Alg), PubKeyBlob = encode_public_key(Key), SigData = build_sig_data(SessionId, - User, Service, PubKeyBlob, Alg), + User, Service, PubKeyBlob, StrAlgo), Sig = ssh_transport:sign(SigData, Hash, Key), - SigBlob = list_to_binary([?string(Alg), ?binary(Sig)]), + SigBlob = list_to_binary([?string(StrAlgo), ?binary(Sig)]), ssh_transport:ssh_packet( #ssh_msg_userauth_request{user = User, service = Service, method = "publickey", data = [?TRUE, - ?string(Alg), + ?string(StrAlgo), ?binary(PubKeyBlob), ?binary(SigBlob)]}, Ssh); @@ -71,7 +72,7 @@ password_msg([#ssh{opts = Opts, io_cb = IoCb, ssh_bits:install_messages(userauth_passwd_messages()), Password = case proplists:get_value(password, Opts) of undefined -> - user_interaction(IoCb); + user_interaction(IoCb, Ssh); PW -> PW end, @@ -89,10 +90,10 @@ password_msg([#ssh{opts = Opts, io_cb = IoCb, Ssh) end. -user_interaction(ssh_no_io) -> +user_interaction(ssh_no_io, _) -> not_ok; -user_interaction(IoCb) -> - IoCb:read_password("ssh password: "). +user_interaction(IoCb, Ssh) -> + IoCb:read_password("ssh password: ", Ssh). %% See RFC 4256 for info on keyboard-interactive @@ -118,15 +119,36 @@ init_userauth_request_msg(#ssh{opts = Opts} = Ssh) -> service = "ssh-connection", method = "none", data = <<>>}, - FirstAlg = algorithm(proplists:get_value(public_key_alg, Opts, - ?PREFERRED_PK_ALG)), - SecondAlg = other_alg(FirstAlg), - AllowUserInt = proplists:get_value(user_interaction, Opts, true), - Prefs = method_preference(FirstAlg, SecondAlg, AllowUserInt), - ssh_transport:ssh_packet(Msg, Ssh#ssh{user = User, - userauth_preference = Prefs, - userauth_methods = none, - service = "ssh-connection"}); + case proplists:get_value(pref_public_key_algs, Opts, false) of + false -> + FirstAlg = proplists:get_value(public_key_alg, Opts, ?PREFERRED_PK_ALG), + SecondAlg = other_alg(FirstAlg), + AllowUserInt = proplists:get_value(user_interaction, Opts, true), + Prefs = method_preference(FirstAlg, SecondAlg, AllowUserInt), + ssh_transport:ssh_packet(Msg, Ssh#ssh{user = User, + userauth_preference = Prefs, + userauth_methods = none, + service = "ssh-connection"}); + Algs -> + FirstAlg = lists:nth(1, Algs), + case length(Algs) =:= 2 of + true -> + SecondAlg = other_alg(FirstAlg), + AllowUserInt = proplists:get_value(user_interaction, Opts, true), + Prefs = method_preference(FirstAlg, SecondAlg, AllowUserInt), + ssh_transport:ssh_packet(Msg, Ssh#ssh{user = User, + userauth_preference = Prefs, + userauth_methods = none, + service = "ssh-connection"}); + _ -> + AllowUserInt = proplists:get_value(user_interaction, Opts, true), + Prefs = method_preference(FirstAlg, AllowUserInt), + ssh_transport:ssh_packet(Msg, Ssh#ssh{user = User, + userauth_preference = Prefs, + userauth_methods = none, + service = "ssh-connection"}) + end + end; {error, no_user} -> ErrStr = "Could not determine the users name", throw(#ssh_msg_disconnect{code = ?SSH_DISCONNECT_ILLEGAL_USER_NAME, @@ -287,6 +309,15 @@ method_preference(Alg1, Alg2, false) -> {"publickey", ?MODULE, publickey_msg,[Alg2]}, {"password", ?MODULE, password_msg, []} ]. +method_preference(Alg1, true) -> + [{"publickey", ?MODULE, publickey_msg, [Alg1]}, + {"password", ?MODULE, password_msg, []}, + {"keyboard-interactive", ?MODULE, keyboard_interactive_msg, []} + ]; +method_preference(Alg1, false) -> + [{"publickey", ?MODULE, publickey_msg, [Alg1]}, + {"password", ?MODULE, password_msg, []} + ]. user_name(Opts) -> Env = case os:type() of @@ -327,7 +358,7 @@ verify_sig(SessionId, User, Service, Alg, KeyBlob, SigWLen, Opts) -> {ok, Key} = decode_public_key_v2(KeyBlob, Alg), KeyCb = proplists:get_value(key_cb, Opts, ssh_file), - case KeyCb:is_auth_key(Key, User, Alg, Opts) of + case KeyCb:is_auth_key(Key, User, Opts) of true -> PlainText = build_sig_data(SessionId, User, Service, KeyBlob, Alg), @@ -350,9 +381,9 @@ build_sig_data(SessionId, User, Service, KeyBlob, Alg) -> ?binary(KeyBlob)], list_to_binary(Sig). -algorithm(ssh_rsa) -> +algorithm_string('ssh-rsa') -> "ssh-rsa"; -algorithm(ssh_dsa) -> +algorithm_string('ssh-dss') -> "ssh-dss". decode_keyboard_interactive_prompts(NumPrompts, Data) -> @@ -370,11 +401,11 @@ keyboard_interact_get_responses(IoCb, Opts, Name, Instr, PromptInfos) -> %% Special case/fallback for just one prompt %% (assumed to be the password prompt) case proplists:get_value(password, Opts) of - undefined -> keyboard_interact(IoCb, Name, Instr, PromptInfos); + undefined -> keyboard_interact(IoCb, Name, Instr, PromptInfos, Opts); PW -> [PW] end; undefined -> - keyboard_interact(IoCb, Name, Instr, PromptInfos); + keyboard_interact(IoCb, Name, Instr, PromptInfos, Opts); KbdInteractFun -> Prompts = lists:map(fun({Prompt, _Echo}) -> Prompt end, PromptInfos), @@ -388,15 +419,15 @@ keyboard_interact_get_responses(IoCb, Opts, Name, Instr, PromptInfos) -> end end. -keyboard_interact(IoCb, Name, Instr, Prompts) -> +keyboard_interact(IoCb, Name, Instr, Prompts, Opts) -> if Name /= "" -> IoCb:format("~s", [Name]); true -> ok end, if Instr /= "" -> IoCb:format("~s", [Instr]); true -> ok end, - lists:map(fun({Prompt, true}) -> IoCb:read_line(Prompt); - ({Prompt, false}) -> IoCb:read_password(Prompt) + lists:map(fun({Prompt, true}) -> IoCb:read_line(Prompt, Opts); + ({Prompt, false}) -> IoCb:read_password(Prompt, Opts) end, Prompts). @@ -426,10 +457,10 @@ userauth_pk_messages() -> binary]} % key blob ]. -other_alg("ssh-rsa") -> - "ssh-dss"; -other_alg("ssh-dss") -> - "ssh-rsa". +other_alg('ssh-rsa') -> + 'ssh-dss'; +other_alg('ssh-dss') -> + 'ssh-rsa'. decode_public_key_v2(K_S, "ssh-rsa") -> case ssh_bits:decode(K_S,[string,mpint,mpint]) of ["ssh-rsa", E, N] -> diff --git a/lib/ssh/src/ssh_auth.hrl b/lib/ssh/src/ssh_auth.hrl index e74ee10041..6cd8e6bf14 100644 --- a/lib/ssh/src/ssh_auth.hrl +++ b/lib/ssh/src/ssh_auth.hrl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2008-2010. All Rights Reserved. +%% Copyright Ericsson AB 2008-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -23,7 +23,7 @@ -define(SUPPORTED_AUTH_METHODS, "publickey,keyboard-interactive,password"). --define(PREFERRED_PK_ALG, ssh_rsa). +-define(PREFERRED_PK_ALG, 'ssh-rsa'). -define(SSH_MSG_USERAUTH_REQUEST, 50). -define(SSH_MSG_USERAUTH_FAILURE, 51). diff --git a/lib/ssh/src/ssh_channel.erl b/lib/ssh/src/ssh_channel.erl index 1938858420..4e8f8538c2 100644 --- a/lib/ssh/src/ssh_channel.erl +++ b/lib/ssh/src/ssh_channel.erl @@ -23,14 +23,35 @@ -include("ssh_connect.hrl"). -%%% Optional callbacks handle_call/3, handle_cast/2, handle_msg/2, -%%% code_change/3 -%% Should be further specified later --callback init(Options::list()) -> - {ok, State::term()} | {ok, State::term(), Timeout::timeout()} | - {stop, Reason ::term()}. - --callback terminate(term(), term()) -> term(). +-callback init(Args :: term()) -> + {ok, State :: term()} | {ok, State :: term(), timeout() | hibernate} | + {stop, Reason :: term()} | ignore. +-callback handle_call(Request :: term(), From :: {pid(), Tag :: term()}, + State :: term()) -> + {reply, Reply :: term(), NewState :: term()} | + {reply, Reply :: term(), NewState :: term(), timeout() | hibernate} | + {noreply, NewState :: term()} | + {noreply, NewState :: term(), timeout() | hibernate} | + {stop, Reason :: term(), Reply :: term(), NewState :: term()} | + {stop, Reason :: term(), NewState :: term()}. +-callback handle_cast(Request :: term(), State :: term()) -> + {noreply, NewState :: term()} | + {noreply, NewState :: term(), timeout() | hibernate} | + {stop, Reason :: term(), NewState :: term()}. + +-callback terminate(Reason :: (normal | shutdown | {shutdown, term()} | + term()), + State :: term()) -> + term(). +-callback code_change(OldVsn :: (term() | {down, term()}), State :: term(), + Extra :: term()) -> + {ok, NewState :: term()} | {error, Reason :: term()}. + +-callback handle_msg(Msg ::term(), State :: term()) -> + {noreply, NewState :: term()} | + {noreply, NewState :: term(), timeout() | hibernate} | + {stop, Reason :: term(), NewState :: term()}. + -callback handle_ssh_msg({ssh_cm, ConnectionRef::term(), SshMsg::term()}, State::term()) -> {ok, State::term()} | diff --git a/lib/ssh/src/ssh_client_key.erl b/lib/ssh/src/ssh_client_key.erl new file mode 100644 index 0000000000..2c48884dc2 --- /dev/null +++ b/lib/ssh/src/ssh_client_key.erl @@ -0,0 +1,34 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2011-2012. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% +%% + +-module(ssh_client_key). + +-include_lib("public_key/include/public_key.hrl"). +-include("ssh.hrl"). + +-callback is_host_key(Key :: public_key(), Host :: string(), + Algorithm :: 'ssh-rsa'| 'ssh-dsa'| atom(), Options :: proplists:proplist()) -> + boolean(). + +-callback user_key(Algorithm :: 'ssh-rsa'| 'ssh-dsa'| atom(), Options :: list()) -> + {ok, PrivateKey :: term()} | {error, string()}. + + +-callback add_host_key(Host :: string(), PublicKey :: term(), Options :: list()) -> + ok | {error, Error::term()}. diff --git a/lib/ssh/src/ssh_client_key_api.erl b/lib/ssh/src/ssh_client_key_api.erl new file mode 100644 index 0000000000..eed0b85f47 --- /dev/null +++ b/lib/ssh/src/ssh_client_key_api.erl @@ -0,0 +1,35 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2011-2012. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% +%% + +-module(ssh_client_key_api). + +-include_lib("public_key/include/public_key.hrl"). +-include("ssh.hrl"). + +-callback is_host_key(PublicKey :: #'RSAPublicKey'{}| {integer(), #'Dss-Parms'{}}| term() , Host :: string(), + Algorithm :: 'ssh-rsa'| 'ssh-dss'| atom(), ConnectOptions :: proplists:proplist()) -> + boolean(). + +-callback user_key(Algorithm :: 'ssh-rsa'| 'ssh-dss'| atom(), ConnectOptions :: proplists:proplists()) -> + {ok, PrivateKey :: #'RSAPrivateKey'{}| #'DSAPrivateKey'{} | term()} | {error, string()}. + + +-callback add_host_key(Host :: string(), PublicKey :: #'RSAPublicKey'{}| {integer(), #'Dss-Parms'{}}| term(), + Options :: list()) -> + ok | {error, Error::term()}. diff --git a/lib/ssh/src/ssh_connection_handler.erl b/lib/ssh/src/ssh_connection_handler.erl index 5b3d1b8a1b..b79e8530b7 100644 --- a/lib/ssh/src/ssh_connection_handler.erl +++ b/lib/ssh/src/ssh_connection_handler.erl @@ -718,8 +718,18 @@ init_ssh(server = Role, Vsn, Version, Options, Socket) -> available_host_keys = supported_host_keys(Role, KeyCb, Options) }. -supported_host_keys(client, _, _) -> - ["ssh-rsa", "ssh-dss"]; +supported_host_keys(client, _, Options) -> + try + case extract_algs(proplists:get_value(pref_public_key_algs, Options, false), []) of + false -> + ["ssh-rsa", "ssh-dss"]; + Algs -> + Algs + end + catch + exit:Reason -> + {stop, {shutdown, Reason}} + end; supported_host_keys(server, KeyCb, Options) -> lists:foldl(fun(Type, Acc) -> case available_host_key(KeyCb, Type, Options) of @@ -731,7 +741,19 @@ supported_host_keys(server, KeyCb, Options) -> end, [], %% Prefered alg last so no need to reverse ["ssh-dss", "ssh-rsa"]). - +extract_algs(false, _) -> + false; +extract_algs([],[]) -> + false; +extract_algs([], NewList) -> + lists:reverse(NewList); +extract_algs([H|T], NewList) -> + case H of + 'ssh-dss' -> + extract_algs(T, ["ssh-dss"|NewList]); + 'ssh-rsa' -> + extract_algs(T, ["ssh-rsa"|NewList]) + end. available_host_key(KeyCb, "ssh-dss"= Alg, Opts) -> case KeyCb:host_key('ssh-dss', Opts) of {ok, _} -> diff --git a/lib/ssh/src/ssh_connection_manager.erl b/lib/ssh/src/ssh_connection_manager.erl index 422d9356d5..0c1eee5186 100644 --- a/lib/ssh/src/ssh_connection_manager.erl +++ b/lib/ssh/src/ssh_connection_manager.erl @@ -62,6 +62,7 @@ latest_channel_id = 0, opts, channel_args, + idle_timer_ref, % timerref connected }). @@ -203,6 +204,8 @@ init([client, Opts]) -> ChannelPid = proplists:get_value(channel_pid, Opts), self() ! {start_connection, client, [Parent, Address, Port, SocketOpts, Options]}, + TimerRef = get_idle_time(Options), + {ok, #state{role = client, client = ChannelPid, connection_state = #connection{channel_cache = Cache, @@ -211,6 +214,7 @@ init([client, Opts]) -> connection_supervisor = Parent, requests = []}, opts = Opts, + idle_timer_ref = TimerRef, connected = false}}. %%-------------------------------------------------------------------- @@ -230,6 +234,13 @@ handle_call({request, ChannelPid, ChannelId, Type, Data}, From, State0) -> %% channel is sent later when reply arrives from the connection %% handler. lists:foreach(fun send_msg/1, Replies), + SshOpts = proplists:get_value(ssh_opts, State0#state.opts), + case proplists:get_value(idle_time, SshOpts) of + infinity -> + ok; + _IdleTime -> + erlang:send_after(5000, self(), {check_cache, [], []}) + end, {noreply, State}; handle_call({request, ChannelId, Type, Data}, From, State0) -> @@ -358,7 +369,7 @@ handle_call({open, ChannelPid, Type, InitialWindowSize, MaxPacketSize, Data}, recv_packet_size = MaxPacketSize}, ssh_channel:cache_update(Cache, Channel), State = add_request(true, ChannelId, From, State1), - {noreply, State}; + {noreply, remove_timer_ref(State)}; handle_call({send_window, ChannelId}, _From, #state{connection_state = @@ -403,6 +414,13 @@ handle_call({close, ChannelId}, _, send_msg({connection_reply, Pid, ssh_connection:channel_close_msg(Id)}), ssh_channel:cache_update(Cache, Channel#channel{sent_close = true}), + SshOpts = proplists:get_value(ssh_opts, State#state.opts), + case proplists:get_value(idle_time, SshOpts) of + infinity -> + ok; + _IdleTime -> + erlang:send_after(5000, self(), {check_cache, [], []}) + end, {reply, ok, State}; undefined -> {reply, ok, State} @@ -523,7 +541,10 @@ handle_info({start_connection, client, Pid ! {self(), not_connected, Reason}, {stop, {shutdown, normal}, State} end; - +handle_info({check_cache, _ , _}, + #state{connection_state = + #connection{channel_cache = Cache}} = State) -> + {noreply, check_cache(State, Cache)}; handle_info({ssh_cm, _Sender, Msg}, State0) -> %% Backwards compatibility! State = cm_message(Msg, State0), @@ -536,7 +557,7 @@ handle_info({same_user, _}, State) -> handle_info(ssh_connected, #state{role = client, client = Pid} = State) -> Pid ! {self(), is_connected}, - {noreply, State#state{connected = true}}; + {noreply, State#state{connected = true, opts = handle_password(State#state.opts)}}; handle_info(ssh_connected, #state{role = server} = State) -> {noreply, State#state{connected = true}}; @@ -549,6 +570,47 @@ handle_info({'DOWN', _Ref, process, ChannelPid, _Reason}, State) -> handle_info({'EXIT', _Sup, Reason}, State) -> {stop, Reason, State}. +handle_password(Opts) -> + handle_rsa_password(handle_dsa_password(handle_normal_password(Opts))). +handle_normal_password(Opts) -> + case proplists:get_value(ssh_opts, Opts, false) of + false -> + Opts; + SshOpts -> + case proplists:get_value(password, SshOpts, false) of + false -> + Opts; + _Password -> + NewOpts = [{password, undefined}|lists:keydelete(password, 1, SshOpts)], + [{ssh_opts, NewOpts}|lists:keydelete(ssh_opts, 1, Opts)] + end + end. +handle_dsa_password(Opts) -> + case proplists:get_value(ssh_opts, Opts, false) of + false -> + Opts; + SshOpts -> + case proplists:get_value(dsa_pass_phrase, SshOpts, false) of + false -> + Opts; + _Password -> + NewOpts = [{dsa_pass_phrase, undefined}|lists:keydelete(dsa_pass_phrase, 1, SshOpts)], + [{ssh_opts, NewOpts}|lists:keydelete(ssh_opts, 1, Opts)] + end + end. +handle_rsa_password(Opts) -> + case proplists:get_value(ssh_opts, Opts, false) of + false -> + Opts; + SshOpts -> + case proplists:get_value(rsa_pass_phrase, SshOpts, false) of + false -> + Opts; + _Password -> + NewOpts = [{rsa_pass_phrase, undefined}|lists:keydelete(rsa_pass_phrase, 1, SshOpts)], + [{ssh_opts, NewOpts}|lists:keydelete(ssh_opts, 1, Opts)] + end + end. %%-------------------------------------------------------------------- %% Function: terminate(Reason, State) -> void() %% Description: This function is called by a gen_server when it is about to @@ -580,6 +642,45 @@ code_change(_OldVsn, State, _Extra) -> %%-------------------------------------------------------------------- %%% Internal functions %%-------------------------------------------------------------------- +get_idle_time(SshOptions) -> + case proplists:get_value(idle_time, SshOptions) of + infinity -> + infinity; + _IdleTime -> %% We dont want to set the timeout on first connect + undefined + end. +check_cache(State, Cache) -> + %% Check the number of entries in Cache + case proplists:get_value(size, ets:info(Cache)) of + 0 -> + Opts = proplists:get_value(ssh_opts, State#state.opts), + case proplists:get_value(idle_time, Opts) of + infinity -> + State; + undefined -> + State; + Time -> + case State#state.idle_timer_ref of + undefined -> + TimerRef = erlang:send_after(Time, self(), {'EXIT', [], "Timeout"}), + State#state{idle_timer_ref=TimerRef}; + _ -> + State + end + end; + _ -> + State + end. +remove_timer_ref(State) -> + case State#state.idle_timer_ref of + infinity -> %% If the timer is not activated + State; + undefined -> %% If we already has cancelled the timer + State; + TimerRef -> %% Timer is active + erlang:cancel_timer(TimerRef), + State#state{idle_timer_ref = undefined} + end. channel_data(Id, Type, Data, Connection0, ConnectionPid, From, State) -> case ssh_connection:channel_data(Id, Type, Data, Connection0, ConnectionPid, From) of @@ -677,7 +778,7 @@ handle_channel_down(ChannelPid, #state{connection_state = (_,Acc) -> Acc end, [], Cache), - {{replies, []}, State}. + {{replies, []}, check_cache(State, Cache)}. update_sys(Cache, Channel, Type, ChannelPid) -> ssh_channel:cache_update(Cache, diff --git a/lib/ssh/src/ssh_file.erl b/lib/ssh/src/ssh_file.erl index a6b82a7a13..f115a32710 100644 --- a/lib/ssh/src/ssh_file.erl +++ b/lib/ssh/src/ssh_file.erl @@ -23,7 +23,8 @@ -module(ssh_file). --behaviour(ssh_key_api). +-behaviour(ssh_server_key_api). +-behaviour(ssh_client_key_api). -include_lib("public_key/include/public_key.hrl"). -include_lib("kernel/include/file.hrl"). @@ -34,7 +35,7 @@ user_key/2, is_host_key/4, add_host_key/3, - is_auth_key/4]). + is_auth_key/3]). -define(PERM_700, 8#700). @@ -53,8 +54,8 @@ host_key(Algorithm, Opts) -> decode(File, Password). -is_auth_key(Key, User, Alg, Opts) -> - case lookup_user_key(Key, User, Alg, Opts) of +is_auth_key(Key, User,Opts) -> + case lookup_user_key(Key, User, Opts) of {ok, Key} -> true; _ -> @@ -138,13 +139,13 @@ add_host_key(Host, Key, Opts) -> Error end. -lookup_user_key(Key, User, Alg, Opts) -> +lookup_user_key(Key, User, Opts) -> SshDir = ssh_dir({remoteuser,User}, Opts), - case lookup_user_key_f(Key, User, SshDir, Alg, "authorized_keys", Opts) of + case lookup_user_key_f(Key, User, SshDir, "authorized_keys", Opts) of {ok, Key} -> {ok, Key}; _ -> - lookup_user_key_f(Key, User, SshDir, Alg, "authorized_keys2", Opts) + lookup_user_key_f(Key, User, SshDir, "authorized_keys2", Opts) end. @@ -213,9 +214,9 @@ do_lookup_host_key(Host, Alg, Opts) -> Error -> Error end. -identity_key_filename("ssh-dss") -> +identity_key_filename('ssh-dss') -> "id_dsa"; -identity_key_filename("ssh-rsa") -> +identity_key_filename('ssh-rsa') -> "id_rsa". identity_pass_phrase("ssh-dss") -> @@ -261,9 +262,9 @@ host_name(Atom) when is_atom(Atom) -> host_name(List) -> List. -key_match(#'RSAPublicKey'{}, "ssh-rsa") -> +key_match(#'RSAPublicKey'{}, 'ssh-rsa') -> true; -key_match({_, #'Dss-Parms'{}}, "ssh-dss") -> +key_match({_, #'Dss-Parms'{}}, 'ssh-dss') -> true; key_match(_, _) -> false. @@ -272,11 +273,11 @@ add_key_fd(Fd, Host,Key) -> SshBin = public_key:ssh_encode([{Key, [{hostnames, [Host]}]}], known_hosts), file:write(Fd, SshBin). -lookup_user_key_f(_, _User, [], _Alg, _F, _Opts) -> +lookup_user_key_f(_, _User, [], _F, _Opts) -> {error, nouserdir}; -lookup_user_key_f(_, _User, nouserdir, _Alg, _F, _Opts) -> +lookup_user_key_f(_, _User, nouserdir, _F, _Opts) -> {error, nouserdir}; -lookup_user_key_f(Key, _User, Dir, _Alg, F, _Opts) -> +lookup_user_key_f(Key, _User, Dir, F, _Opts) -> FileName = filename:join(Dir, F), case file:open(FileName, [read, binary]) of {ok, Fd} -> diff --git a/lib/ssh/src/ssh_io.erl b/lib/ssh/src/ssh_io.erl index 1dbd097423..01fc713569 100644 --- a/lib/ssh/src/ssh_io.erl +++ b/lib/ssh/src/ssh_io.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2005-2011. All Rights Reserved. +%% Copyright Ericsson AB 2005-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -23,37 +23,52 @@ -module(ssh_io). --export([yes_no/1, read_password/1, read_line/1, format/2]). +-export([yes_no/2, read_password/2, read_line/2, format/2]). -import(lists, [reverse/1]). +-include("ssh.hrl"). +read_line(Prompt, Ssh) -> + format("~s", [listify(Prompt)]), + proplists:get_value(user_pid, Ssh) ! {self(), question}, + receive + Answer -> + Answer + end. -read_line(Prompt) when is_list(Prompt) -> - io:get_line(list_to_atom(Prompt)); -read_line(Prompt) when is_atom(Prompt) -> - io:get_line(Prompt). - -read_ln(Prompt) -> - trim(read_line(Prompt)). - -yes_no(Prompt) -> +yes_no(Prompt, Ssh) -> io:format("~s [y/n]?", [Prompt]), - case read_ln('') of - "y" -> yes; - "n" -> no; - "Y" -> yes; - "N" -> no; - _ -> - io:format("please answer y or n\n"), - yes_no(Prompt) + proplists:get_value(user_pid, Ssh#ssh.opts) ! {self(), question}, + receive + Answer -> + case trim(Answer) of + "y" -> yes; + "n" -> no; + "Y" -> yes; + "N" -> no; + y -> yes; + n -> no; + _ -> + io:format("please answer y or n\n"), + yes_no(Prompt, Ssh) + end end. -read_password(Prompt) -> +read_password(Prompt, Ssh) -> format("~s", [listify(Prompt)]), - case io:get_password() of - "" -> - read_password(Prompt); - Pass -> Pass + case is_list(Ssh) of + false -> + proplists:get_value(user_pid, Ssh#ssh.opts) ! {self(), user_password}; + _ -> + proplists:get_value(user_pid, Ssh) ! {self(), user_password} + end, + receive + Answer -> + case Answer of + "" -> + read_password(Prompt, Ssh); + Pass -> Pass + end end. listify(A) when is_atom(A) -> diff --git a/lib/ssh/src/ssh_key_api.erl b/lib/ssh/src/ssh_key_api.erl deleted file mode 100644 index 8085c12e21..0000000000 --- a/lib/ssh/src/ssh_key_api.erl +++ /dev/null @@ -1,45 +0,0 @@ -%% -%% %CopyrightBegin% -%% -%% Copyright Ericsson AB 2011-2012. All Rights Reserved. -%% -%% The contents of this file are subject to the Erlang Public License, -%% Version 1.1, (the "License"); you may not use this file except in -%% compliance with the License. You should have received a copy of the -%% Erlang Public License along with this software. If not, it can be -%% retrieved online at http://www.erlang.org/. -%% -%% Software distributed under the License is distributed on an "AS IS" -%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See -%% the License for the specific language governing rights and limitations -%% under the License. -%% -%% %CopyrightEnd% -%% - --module(ssh_key_api). - --include_lib("public_key/include/public_key.hrl"). --include("ssh.hrl"). - --type ssh_algorithm() :: string(). --type file_error() :: file:posix() | badarg | system_limit | terminated. - --callback host_key(Algorithm :: ssh_algorithm(), Options :: list()) -> - {ok, [{public_key(), Attributes::list()}]} | public_key() - | {error, string()}. - --callback user_key(Algorithm :: ssh_algorithm(), Options :: list()) -> - {ok, [{public_key(), Attributes::list()}]} | public_key() - | {error, string()}. - --callback is_host_key(Key :: public_key(), PeerName :: string(), - Algorithm :: ssh_algorithm(), Options :: list()) -> - boolean(). - --callback add_host_key(Host :: string(), Key :: public_key(), Options :: list()) -> - ok | {error, file_error()}. - --callback is_auth_key(Key :: public_key(), User :: string(), - Algorithm :: ssh_algorithm(), Options :: list()) -> - boolean(). diff --git a/lib/ssh/src/ssh_server_key.erl b/lib/ssh/src/ssh_server_key.erl new file mode 100644 index 0000000000..8140114990 --- /dev/null +++ b/lib/ssh/src/ssh_server_key.erl @@ -0,0 +1,33 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2011-2012. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% +%% + +-module(ssh_server_key). + +-include_lib("public_key/include/public_key.hrl"). +-include("ssh.hrl"). + +-type ssh_algorithm() :: string(). + +-callback host_key(Algorithm :: ssh_algorithm(), Options :: list()) -> + {ok, [{public_key(), Attributes::list()}]} | public_key() + | {error, string()}. + +-callback is_auth_key(Key :: public_key(), User :: string(), + Algorithm :: ssh_algorithm(), Options :: list()) -> + boolean(). diff --git a/lib/ssh/src/ssh_server_key_api.erl b/lib/ssh/src/ssh_server_key_api.erl new file mode 100644 index 0000000000..4fd660ecb5 --- /dev/null +++ b/lib/ssh/src/ssh_server_key_api.erl @@ -0,0 +1,30 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2011-2012. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% +%% + +-module(ssh_server_key_api). + +-include_lib("public_key/include/public_key.hrl"). +-include("ssh.hrl"). + +-callback host_key(Algorithm :: 'ssh-rsa'| 'ssh-dss'| atom(), DaemonOptions :: proplists:proplist()) -> + {ok, PrivateKey :: #'RSAPrivateKey'{}| #'DSAPrivateKey'{} | term()} | {error, string()}. + +-callback is_auth_key(PublicKey :: #'RSAPublicKey'{}| {integer(), #'Dss-Parms'{}}| term(), + User :: string(), DaemonOptions :: proplists:proplist()) -> + boolean(). diff --git a/lib/ssh/src/ssh_sftpd.erl b/lib/ssh/src/ssh_sftpd.erl index ec7b76b0b3..6d6f4a0121 100644 --- a/lib/ssh/src/ssh_sftpd.erl +++ b/lib/ssh/src/ssh_sftpd.erl @@ -24,7 +24,7 @@ -module(ssh_sftpd). %%-behaviour(gen_server). --behaviour(ssh_channel). +-behaviour(ssh_subsystem). -include_lib("kernel/include/file.hrl"). @@ -36,7 +36,7 @@ -export([subsystem_spec/1, listen/1, listen/2, listen/3, stop/1]). --export([init/1, handle_ssh_msg/2, handle_msg/2, terminate/2, code_change/3]). +-export([init/1, handle_ssh_msg/2, handle_msg/2, terminate/2]). -record(state, { xf, % [{channel,ssh_xfer states}...] @@ -128,14 +128,6 @@ init(Options) -> %%-------------------------------------------------------------------- -%% Function: code_change(OldVsn, State, Extra) -> {ok, NewState} -%% Description: -%%-------------------------------------------------------------------- -code_change(_OldVsn, State, _Extra) -> - {ok, State}. - - -%%-------------------------------------------------------------------- %% Function: handle_ssh_msg(Args) -> {ok, State} | {stop, ChannelId, State} %% %% Description: Handles channel messages diff --git a/lib/ssh/src/ssh_subsystem.erl b/lib/ssh/src/ssh_subsystem.erl new file mode 100644 index 0000000000..5a9fa32668 --- /dev/null +++ b/lib/ssh/src/ssh_subsystem.erl @@ -0,0 +1,47 @@ +-module(ssh_subsystem). + +%% API to special server side channel that can be pluged into the erlang ssh daemeon +-callback init(Args :: term()) -> + {ok, State :: term()} | {ok, State :: term(), timeout() | hibernate} | + {stop, Reason :: term()} | ignore. + +-callback terminate(Reason :: (normal | shutdown | {shutdown, term()} | + term()), + State :: term()) -> + term(). + +-callback handle_msg(Msg ::term(), State :: term()) -> + {noreply, NewState :: term()} | + {noreply, NewState :: term(), timeout() | hibernate} | + {stop, Reason :: term(), NewState :: term()}. + +-callback handle_ssh_msg({ssh_cm, ConnectionRef::term(), SshMsg::term()}, + State::term()) -> {ok, State::term()} | + {stop, ChannelId::integer(), + State::term()}. + +%%% API +-export([start/4, start/5, start_link/4, start_link/5, enter_loop/1]). + +%% gen_server callbacks +-export([init/1, terminate/2]). + +start(ConnectionManager, ChannelId, CallBack, CbInitArgs) -> + ssh_channel:start(ConnectionManager, ChannelId, CallBack, CbInitArgs, undefined). + +start(ConnectionManager, ChannelId, CallBack, CbInitArgs, Exec) -> + ssh_channel:start(ConnectionManager, ChannelId, CallBack, CbInitArgs, Exec). + +start_link(ConnectionManager, ChannelId, CallBack, CbInitArgs) -> + ssh_channel:start_link(ConnectionManager, ChannelId, CallBack, CbInitArgs, undefined). + +start_link(ConnectionManager, ChannelId, CallBack, CbInitArgs, Exec) -> + ssh_channel:start_link(ConnectionManager, ChannelId, CallBack, CbInitArgs, Exec). + +enter_loop(State) -> + ssh_channel:enter_loop(State). + +init(Args) -> + ssh_channel:init(Args). +terminate(Reason, State) -> + ssh_channel:terminate(Reason, State). diff --git a/lib/ssh/src/ssh_transport.erl b/lib/ssh/src/ssh_transport.erl index 1f912c9bdf..1abb69921d 100644 --- a/lib/ssh/src/ssh_transport.erl +++ b/lib/ssh/src/ssh_transport.erl @@ -133,7 +133,7 @@ kex_dh_gex_messages() -> ]. yes_no(Ssh, Prompt) -> - (Ssh#ssh.io_cb):yes_no(Prompt). + (Ssh#ssh.io_cb):yes_no(Prompt, Ssh). connect(ConnectionSup, Address, Port, SocketOpts, Opts) -> Timeout = proplists:get_value(connect_timeout, Opts, infinity), @@ -449,7 +449,7 @@ verify_host_key_rsa(SSH, K_S, H, H_SIG) -> false -> {error, bad_signature}; true -> - known_host_key(SSH, Public, "ssh-rsa") + known_host_key(SSH, Public, 'ssh-rsa') end; _ -> {error, bad_format} @@ -464,7 +464,7 @@ verify_host_key_dss(SSH, K_S, H, H_SIG) -> false -> {error, bad_signature}; true -> - known_host_key(SSH, Public, "ssh-dss") + known_host_key(SSH, Public, 'ssh-dss') end; _ -> {error, bad_host_key_format} diff --git a/lib/ssh/test/ssh_basic_SUITE.erl b/lib/ssh/test/ssh_basic_SUITE.erl index 7a641c92c1..5fec7f0cd7 100644 --- a/lib/ssh/test/ssh_basic_SUITE.erl +++ b/lib/ssh/test/ssh_basic_SUITE.erl @@ -42,14 +42,15 @@ all() -> {group, dsa_pass_key}, {group, rsa_pass_key}, {group, internal_error}, + {group, idle_time}, daemon_already_started, server_password_option, server_userpassword_option, close]. groups() -> - [{dsa_key, [], [send, exec, exec_compressed, shell, known_hosts]}, - {rsa_key, [], [send, exec, exec_compressed, shell, known_hosts]}, + [{dsa_key, [], [send, exec, exec_compressed, shell, known_hosts, idle_time]}, + {rsa_key, [], [send, exec, exec_compressed, shell, known_hosts, idle_time]}, {dsa_pass_key, [], [pass_phrase]}, {rsa_pass_key, [], [pass_phrase]}, {internal_error, [], [internal_error]} @@ -234,7 +235,27 @@ exec_compressed(Config) when is_list(Config) -> ssh:stop_daemon(Pid). %%-------------------------------------------------------------------- +idle_time(doc) -> + ["Idle timeout test"]; +idle_time(Config) -> + SystemDir = filename:join(?config(priv_dir, Config), system), + UserDir = ?config(priv_dir, Config), + {Pid, Host, Port} = ssh_test_lib:daemon([{system_dir, SystemDir}, + {user_dir, UserDir}, + {failfun, fun ssh_test_lib:failfun/2}]), + ConnectionRef = + ssh_test_lib:connect(Host, Port, [{silently_accept_hosts, true}, + {user_dir, UserDir}, + {user_interaction, false}]), + {ok, Id} = ssh_connection:session_channel(ConnectionRef, 1000), + ssh_connection:close(ConnectionRef, Id), + receive + after 10000 -> + {error,channel_closed} = ssh_connection:session_channel(ConnectionRef, 1000) + end, + ssh:stop_daemon(Pid). +%%-------------------------------------------------------------------- shell(doc) -> ["Test that ssh:shell/2 works"]; shell(Config) when is_list(Config) -> diff --git a/lib/ssh/test/ssh_echo_server.erl b/lib/ssh/test/ssh_echo_server.erl index 739aabe6fb..007b00c373 100644 --- a/lib/ssh/test/ssh_echo_server.erl +++ b/lib/ssh/test/ssh_echo_server.erl @@ -21,7 +21,7 @@ %%% Description: Example ssh server -module(ssh_echo_server). --behaviour(ssh_channel). +-behaviour(ssh_subsytem). -record(state, { n, id, @@ -50,7 +50,7 @@ handle_ssh_msg({ssh_cm, CM, {data, ChannelId, 0, Data}}, #state{n = N} = State) end; handle_ssh_msg({ssh_cm, _ConnectionManager, {data, _ChannelId, 1, Data}}, State) -> - error_logger:format("ssh: STDERR: ~s\n", [binary_to_list(Data)]), + error_logger:format(standard_error, " ~p~n", [binary_to_list(Data)]), {ok, State}; handle_ssh_msg({ssh_cm, _ConnectionManager, {eof, _ChannelId}}, State) -> diff --git a/lib/ssh/vsn.mk b/lib/ssh/vsn.mk index defa47f824..921ec2206a 100644 --- a/lib/ssh/vsn.mk +++ b/lib/ssh/vsn.mk @@ -1,5 +1,5 @@ #-*-makefile-*- ; force emacs to enter makefile-mode -SSH_VSN = 2.1.1 +SSH_VSN = 2.1.2 APP_VSN = "ssh-$(SSH_VSN)" diff --git a/lib/ssl/doc/src/notes.xml b/lib/ssl/doc/src/notes.xml index 6c01954010..49bbd5d27d 100644 --- a/lib/ssl/doc/src/notes.xml +++ b/lib/ssl/doc/src/notes.xml @@ -30,7 +30,54 @@ </header> <p>This document describes the changes made to the SSL application.</p> - <section><title>SSL 5.1</title> + <section><title>SSL 5.1.2</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + ssl:ssl_accept/2 timeout is no longer ignored</p> + <p> + Own Id: OTP-10600</p> + </item> + </list> + </section> + +</section> + +<section><title>SSL 5.1.1</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + ssl:recv/3 could "loose" data when the timeout occurs. If + the timout in ssl:connect or ssl:ssl_accept expired the + ssl connection process was not terminated as it should, + this due to gen_fsm:send_all_state_event timout is a + client side time out. These timouts are now handled by + the gen_fsm-procss instead.</p> + <p> + Own Id: OTP-10569</p> + </item> + </list> + </section> + + + <section><title>Improvements and New Features</title> + <list> + <item> + <p> + Better termination handling that avoids hanging.</p> + <p> + Own Id: OTP-10574</p> + </item> + </list> + </section> + +</section> + +<section><title>SSL 5.1</title> <section><title>Fixed Bugs and Malfunctions</title> <list> diff --git a/lib/ssl/src/Makefile b/lib/ssl/src/Makefile index c5c5bf593a..6be8a1456e 100644 --- a/lib/ssl/src/Makefile +++ b/lib/ssl/src/Makefile @@ -130,3 +130,23 @@ release_spec: opt release_docs_spec: +# ---------------------------------------------------- +# Dependencies +# ---------------------------------------------------- +$(EBIN)/inet_tls_dist.$(EMULATOR): ../../kernel/include/net_address.hrl ../../kernel/include/dist.hrl ../../kernel/include/dist_util.hrl +$(EBIN)/ssl.$(EMULATOR): ssl_internal.hrl ssl_record.hrl ssl_cipher.hrl ssl_handshake.hrl ../../public_key/include/public_key.hrl +$(EBIN)/ssl_alert.$(EMULATOR): ssl_alert.hrl ssl_record.hrl +$(EBIN)/ssl_certificate.$(EMULATOR): ssl_internal.hrl ssl_alert.hrl ssl_handshake.hrl ../../public_key/include/public_key.hrl +$(EBIN)/ssl_certificate_db.$(EMULATOR): ssl_internal.hrl ../../public_key/include/public_key.hrl ../../kernel/include/file.hrl +$(EBIN)/ssl_cipher.$(EMULATOR): ssl_internal.hrl ssl_record.hrl ssl_cipher.hrl ssl_handshake.hrl ssl_alert.hrl ../../public_key/include/public_key.hrl +$(EBIN)/ssl_connection.$(EMULATOR): ssl_internal.hrl ssl_record.hrl ssl_cipher.hrl ssl_handshake.hrl ssl_alert.hrl ../../public_key/include/public_key.hrl +$(EBIN)/ssl_handshake.$(EMULATOR): ssl_internal.hrl ssl_record.hrl ssl_cipher.hrl ssl_handshake.hrl ssl_alert.hrl ../../public_key/include/public_key.hrl +$(EBIN)/ssl_manager.$(EMULATOR): ssl_internal.hrl ssl_handshake.hrl ../../kernel/include/file.hrl +$(EBIN)/ssl_record.$(EMULATOR): ssl_internal.hrl ssl_record.hrl ssl_cipher.hrl ssl_handshake.hrl ssl_alert.hrl +$(EBIN)/ssl_session.$(EMULATOR): ssl_internal.hrl ssl_handshake.hrl +$(EBIN)/ssl_session_cache.$(EMULATOR): ssl_internal.hrl ssl_handshake.hrl +$(EBIN)/ssl_session_cache_api.$(EMULATOR): ssl_internal.hrl ssl_handshake.hrl +$(EBIN)/ssl_ssl3.$(EMULATOR): ssl_internal.hrl ssl_record.hrl ssl_cipher.hrl +$(EBIN)/ssl_tls1.$(EMULATOR): ssl_internal.hrl ssl_record.hrl ssl_cipher.hrl + + diff --git a/lib/ssl/src/ssl.appup.src b/lib/ssl/src/ssl.appup.src index 76550fa04b..9b1227fa7f 100644 --- a/lib/ssl/src/ssl.appup.src +++ b/lib/ssl/src/ssl.appup.src @@ -1,14 +1,25 @@ %% -*- erlang -*- {"%VSN%", [ - {"5.0.1", [{restart_application, ssl}]}, - {"5.0", [{restart_application, ssl}]}, + {"5.1.1", [{restart_application, ssl}] + }, + {"5.1", [ + {load_module, ssl_connection, soft_purge, soft_purge, []} + ] + }, + {<<"5.0\\*">>, [{restart_application, ssl}]}, {<<"4\\.*">>, [{restart_application, ssl}]}, {<<"3\\.*">>, [{restart_application, ssl}]} ], [ - {"5.0.1", [{restart_application, ssl}]}, - {"5.0", [{restart_application, ssl}]}, + {"5.1.1", [{restart_application, ssl}] + }, + {"5.1", [ + {load_module, ssl_connection, soft_purge, soft_purge, []} + ] + }, + {"5.1", [{restart_application, ssl}]}, + {<<"5.0\\*">>, [{restart_application, ssl}]}, {<<"4\\.*">>, [{restart_application, ssl}]}, {<<"3\\.*">>, [{restart_application, ssl}]} ]}. diff --git a/lib/ssl/src/ssl.erl b/lib/ssl/src/ssl.erl index 7788f758ac..6224334a6e 100644 --- a/lib/ssl/src/ssl.erl +++ b/lib/ssl/src/ssl.erl @@ -47,7 +47,7 @@ -export_type([connect_option/0, listen_option/0, ssl_option/0, transport_option/0, erl_cipher_suite/0, %% From ssl_cipher.hrl tls_atom_version/0, %% From ssl_internal.hrl - prf_random/0]). + prf_random/0, sslsocket/0]). -record(config, {ssl, %% SSL parameters inet_user, %% User set inet options @@ -55,6 +55,8 @@ inet_ssl, %% inet options for internal ssl socket cb %% Callback info }). + +-type sslsocket() :: #sslsocket{}. -type connect_option() :: socket_connect_option() | ssl_option() | transport_option(). -type socket_connect_option() :: gen_tcp:connect_option(). -type listen_option() :: socket_listen_option() | ssl_option() | transport_option(). @@ -869,10 +871,10 @@ internal_inet_values() -> socket_options(InetValues) -> #socket_options{ - mode = proplists:get_value(mode, InetValues), - header = proplists:get_value(header, InetValues), - active = proplists:get_value(active, InetValues), - packet = proplists:get_value(packet, InetValues), + mode = proplists:get_value(mode, InetValues, lists), + header = proplists:get_value(header, InetValues, 0), + active = proplists:get_value(active, InetValues, active), + packet = proplists:get_value(packet, InetValues, 0), packet_size = proplists:get_value(packet_size, InetValues) }. diff --git a/lib/ssl/src/ssl_connection.erl b/lib/ssl/src/ssl_connection.erl index 1319b54d6b..cde13069b5 100644 --- a/lib/ssl/src/ssl_connection.erl +++ b/lib/ssl/src/ssl_connection.erl @@ -89,6 +89,7 @@ log_alert, % boolean() renegotiation, % {boolean(), From | internal | peer} start_or_recv_from, % "gen_fsm From" + timer, % start_or_recv_timer send_queue, % queue() terminated = false, % allow_renegotiate = true, @@ -119,7 +120,7 @@ send(Pid, Data) -> sync_send_all_state_event(Pid, {application_data, %% iolist_to_binary should really %% be called iodata_to_binary() - erlang:iolist_to_binary(Data)}, infinity). + erlang:iolist_to_binary(Data)}). %%-------------------------------------------------------------------- -spec recv(pid(), integer(), timeout()) -> @@ -128,7 +129,7 @@ send(Pid, Data) -> %% Description: Receives data when active = false %%-------------------------------------------------------------------- recv(Pid, Length, Timeout) -> - sync_send_all_state_event(Pid, {recv, Length}, Timeout). + sync_send_all_state_event(Pid, {recv, Length, Timeout}). %%-------------------------------------------------------------------- -spec connect(host(), inet:port_number(), port(), {#ssl_options{}, #socket_options{}}, pid(), tuple(), timeout()) -> @@ -165,7 +166,7 @@ ssl_accept(Port, Socket, Opts, User, CbInfo, Timeout) -> %% Description: Starts ssl handshake. %%-------------------------------------------------------------------- handshake(#sslsocket{pid = Pid}, Timeout) -> - case sync_send_all_state_event(Pid, start, Timeout) of + case sync_send_all_state_event(Pid, {start, Timeout}) of connected -> ok; Error -> @@ -331,15 +332,15 @@ init([Role, Host, Port, Socket, {SSLOpts0, _} = Options, User, CbInfo]) -> #state{}) -> gen_fsm_state_return(). %%-------------------------------------------------------------------- hello(start, #state{host = Host, port = Port, role = client, - ssl_options = SslOpts, - session = #session{own_certificate = Cert} = Session0, - session_cache = Cache, session_cache_cb = CacheCb, - transport_cb = Transport, socket = Socket, - connection_states = ConnectionStates0, - renegotiation = {Renegotiation, _}} = State0) -> + ssl_options = SslOpts, + session = #session{own_certificate = Cert} = Session0, + session_cache = Cache, session_cache_cb = CacheCb, + transport_cb = Transport, socket = Socket, + connection_states = ConnectionStates0, + renegotiation = {Renegotiation, _}} = State0) -> Hello = ssl_handshake:client_hello(Host, Port, ConnectionStates0, SslOpts, Cache, CacheCb, Renegotiation, Cert), - + Version = Hello#client_hello.client_version, Handshake0 = ssl_handshake:init_handshake_history(), {BinMsg, ConnectionStates, Handshake} = @@ -370,23 +371,22 @@ hello(#server_hello{cipher_suite = CipherSuite, renegotiation = {Renegotiation, _}, ssl_options = SslOptions} = State0) -> case ssl_handshake:hello(Hello, SslOptions, ConnectionStates0, Renegotiation) of - #alert{} = Alert -> - handle_own_alert(Alert, ReqVersion, hello, State0), - {stop, normal, State0}; - + #alert{} = Alert -> + handle_own_alert(Alert, ReqVersion, hello, State0), + {stop, {shutdown, own_alert}, State0}; {Version, NewId, ConnectionStates, NextProtocol} -> {KeyAlgorithm, _, _, _} = ssl_cipher:suite_definition(CipherSuite), PremasterSecret = make_premaster_secret(ReqVersion, KeyAlgorithm), - - NewNextProtocol = case NextProtocol of - undefined -> - State0#state.next_protocol; - _ -> - NextProtocol - end, - + + NewNextProtocol = case NextProtocol of + undefined -> + State0#state.next_protocol; + _ -> + NextProtocol + end, + State = State0#state{key_algorithm = KeyAlgorithm, hashsign_algorithm = default_hashsign(Version, KeyAlgorithm), negotiated_version = Version, @@ -394,13 +394,13 @@ hello(#server_hello{cipher_suite = CipherSuite, premaster_secret = PremasterSecret, expecting_next_protocol_negotiation = NextProtocol =/= undefined, next_protocol = NewNextProtocol}, - + case ssl_session:is_new(OldId, NewId) of true -> handle_new_session(NewId, CipherSuite, Compression, State#state{connection_states = ConnectionStates}); false -> - handle_resumed_session(NewId, State#state{connection_states = ConnectionStates}) + handle_resumed_session(NewId, State#state{connection_states = ConnectionStates}) end end; @@ -419,8 +419,7 @@ hello(Hello = #client_hello{client_version = ClientVersion}, negotiated_version = Version, session = Session}); #alert{} = Alert -> - handle_own_alert(Alert, ClientVersion, hello, State), - {stop, normal, State} + handle_own_alert(Alert, ClientVersion, hello, State) end; hello(timeout, State) -> @@ -451,8 +450,7 @@ abbreviated(#finished{verify_data = Data} = Finished, next_state_connection(abbreviated, ack_connection(State#state{connection_states = ConnectionStates})); #alert{} = Alert -> - handle_own_alert(Alert, Version, abbreviated, State), - {stop, normal, State} + handle_own_alert(Alert, Version, abbreviated, State) end; abbreviated(#finished{verify_data = Data} = Finished, @@ -472,8 +470,7 @@ abbreviated(#finished{verify_data = Data} = Finished, connection_states = ConnectionStates})); #alert{} = Alert -> - handle_own_alert(Alert, Version, abbreviated, State), - {stop, normal, State} + handle_own_alert(Alert, Version, abbreviated, State) end; abbreviated(timeout, State) -> @@ -497,8 +494,7 @@ certify(#certificate{asn1_certificates = []}, fail_if_no_peer_cert = true}} = State) -> Alert = ?ALERT_REC(?FATAL,?HANDSHAKE_FAILURE), - handle_own_alert(Alert, Version, certify, State), - {stop, normal, State}; + handle_own_alert(Alert, Version, certify, State); certify(#certificate{asn1_certificates = []}, #state{role = server, @@ -521,8 +517,7 @@ certify(#certificate{} = Cert, handle_peer_cert(PeerCert, PublicKeyInfo, State#state{client_certificate_requested = false}); #alert{} = Alert -> - handle_own_alert(Alert, Version, certify, State), - {stop, normal, State} + handle_own_alert(Alert, Version, certify, State) end; certify(#server_key_exchange{} = KeyExchangeMsg, @@ -534,8 +529,7 @@ certify(#server_key_exchange{} = KeyExchangeMsg, {Record, State} = next_record(State1), next_state(certify, certify, Record, State); #alert{} = Alert -> - handle_own_alert(Alert, Version, certify, State0), - {stop, normal, State0} + handle_own_alert(Alert, Version, certify, State0) end; certify(#server_key_exchange{} = Msg, @@ -559,8 +553,7 @@ certify(#server_hello_done{}, State = State0#state{connection_states = ConnectionStates}, client_certify_and_key_exchange(State); #alert{} = Alert -> - handle_own_alert(Alert, Version, certify, State0), - {stop, normal, State0} + handle_own_alert(Alert, Version, certify, State0) end; %% Master secret is calculated from premaster_secret @@ -578,8 +571,7 @@ certify(#server_hello_done{}, session = Session}, client_certify_and_key_exchange(State); #alert{} = Alert -> - handle_own_alert(Alert, Version, certify, State0), - {stop, normal, State0} + handle_own_alert(Alert, Version, certify, State0) end; certify(#client_key_exchange{} = Msg, @@ -595,8 +587,7 @@ certify(#client_key_exchange{exchange_keys = Keys}, certify_client_key_exchange(ssl_handshake:decode_client_key(Keys, KeyAlg, Version), State) catch #alert{} = Alert -> - handle_own_alert(Alert, Version, certify, State), - {stop, normal, State} + handle_own_alert(Alert, Version, certify, State) end; @@ -621,8 +612,7 @@ certify_client_key_exchange(#encrypted_premaster_secret{premaster_secret= EncPMS {Record, State} = next_record(State1), next_state(certify, cipher, Record, State); #alert{} = Alert -> - handle_own_alert(Alert, Version, certify, State0), - {stop, normal, State0} + handle_own_alert(Alert, Version, certify, State0) end; certify_client_key_exchange(#client_diffie_hellman_public{dh_public = ClientPublicDhKey}, @@ -635,8 +625,7 @@ certify_client_key_exchange(#client_diffie_hellman_public{dh_public = ClientPubl {Record, State} = next_record(State1), next_state(certify, cipher, Record, State); #alert{} = Alert -> - handle_own_alert(Alert, Version, certify, State0), - {stop, normal, State0} + handle_own_alert(Alert, Version, certify, State0) end. %%-------------------------------------------------------------------- @@ -665,8 +654,7 @@ cipher(#certificate_verify{signature = Signature, hashsign_algorithm = CertHashS {Record, State} = next_record(State0), next_state(cipher, cipher, Record, State); #alert{} = Alert -> - handle_own_alert(Alert, Version, cipher, State0), - {stop, normal, State0} + handle_own_alert(Alert, Version, cipher, State0) end; % client must send a next protocol message if we are expecting it @@ -692,8 +680,7 @@ cipher(#finished{verify_data = Data} = Finished, Session = register_session(Role, Host, Port, Session0), cipher_role(Role, Data, Session, State); #alert{} = Alert -> - handle_own_alert(Alert, Version, cipher, State), - {stop, normal, State} + handle_own_alert(Alert, Version, cipher, State) end; % only allowed to send next_protocol message after change cipher spec @@ -788,8 +775,10 @@ handle_sync_event({application_data, Data}, From, StateName, State#state{send_queue = queue:in({From, Data}, Queue)}, get_timeout(State)}; -handle_sync_event(start, StartFrom, hello, State) -> - hello(start, State#state{start_or_recv_from = StartFrom}); +handle_sync_event({start, Timeout}, StartFrom, hello, State) -> + Timer = start_or_recv_cancel_timer(Timeout, StartFrom), + hello(start, State#state{start_or_recv_from = StartFrom, + timer = Timer}); %% The two clauses below could happen if a server upgrades a socket in %% active mode. Note that in this case we are lucky that @@ -798,13 +787,16 @@ handle_sync_event(start, StartFrom, hello, State) -> %% mode before telling the client that it is willing to upgrade %% and before calling ssl:ssl_accept/2. These clauses are %% here to make sure it is the users problem and not owers if -%% they upgrade a active socket. -handle_sync_event(start, _, connection, State) -> +%% they upgrade an active socket. +handle_sync_event({start,_}, _, connection, State) -> {reply, connected, connection, State, get_timeout(State)}; -handle_sync_event(start, _From, error, {Error, State = #state{}}) -> +handle_sync_event({start,_}, _From, error, {Error, State = #state{}}) -> {stop, {shutdown, Error}, {error, Error}, State}; -handle_sync_event(start, StartFrom, StateName, State) -> - {next_state, StateName, State#state{start_or_recv_from = StartFrom}, get_timeout(State)}; + +handle_sync_event({start, Timeout}, StartFrom, StateName, State) -> + Timer = start_or_recv_cancel_timer(Timeout, StartFrom), + {next_state, StateName, State#state{start_or_recv_from = StartFrom, + timer = Timer}, get_timeout(State)}; handle_sync_event(close, _, StateName, State) -> %% Run terminate before returning @@ -835,13 +827,17 @@ handle_sync_event({shutdown, How0}, _, StateName, {stop, normal, Error, State} end; -handle_sync_event({recv, N}, RecvFrom, connection = StateName, State0) -> - passive_receive(State0#state{bytes_to_read = N, start_or_recv_from = RecvFrom}, StateName); +handle_sync_event({recv, N, Timeout}, RecvFrom, connection = StateName, State0) -> + Timer = start_or_recv_cancel_timer(Timeout, RecvFrom), + passive_receive(State0#state{bytes_to_read = N, + start_or_recv_from = RecvFrom, timer = Timer}, StateName); %% Doing renegotiate wait with handling request until renegotiate is %% finished. Will be handled by next_state_is_connection/2. -handle_sync_event({recv, N}, RecvFrom, StateName, State) -> - {next_state, StateName, State#state{bytes_to_read = N, start_or_recv_from = RecvFrom}, +handle_sync_event({recv, N, Timeout}, RecvFrom, StateName, State) -> + Timer = start_or_recv_cancel_timer(Timeout, RecvFrom), + {next_state, StateName, State#state{bytes_to_read = N, start_or_recv_from = RecvFrom, + timer = Timer}, get_timeout(State)}; handle_sync_event({new_user, User}, _From, StateName, @@ -963,7 +959,7 @@ handle_info({Protocol, _, Data}, StateName, next_state(StateName, StateName, Record, State); #alert{} = Alert -> handle_normal_shutdown(Alert, StateName, State0), - {stop, normal, State0} + {stop, {shutdown, own_alert}, State0} end; handle_info({CloseTag, Socket}, StateName, @@ -984,7 +980,7 @@ handle_info({CloseTag, Socket}, StateName, ok end, handle_normal_shutdown(?ALERT_REC(?FATAL, ?CLOSE_NOTIFY), StateName, State), - {stop, normal, State}; + {stop, {shutdown, transport_closed}, State}; handle_info({ErrorTag, Socket, econnaborted}, StateName, #state{socket = Socket, start_or_recv_from = StartFrom, role = Role, @@ -1005,7 +1001,21 @@ handle_info({'DOWN', MonitorRef, _, _, _}, _, handle_info(allow_renegotiate, StateName, State) -> {next_state, StateName, State#state{allow_renegotiate = true}, get_timeout(State)}; - + +handle_info({cancel_start_or_recv, StartFrom}, StateName, + #state{renegotiation = {false, first}} = State) when StateName =/= connection -> + gen_fsm:reply(StartFrom, {error, timeout}), + {stop, {shutdown, user_timeout}, State#state{timer = undefined}}; + +handle_info({cancel_start_or_recv, RecvFrom}, StateName, #state{start_or_recv_from = RecvFrom} = State) -> + gen_fsm:reply(RecvFrom, {error, timeout}), + {next_state, StateName, State#state{start_or_recv_from = undefined, + bytes_to_read = undefined, + timer = undefined}, get_timeout(State)}; + +handle_info({cancel_start_or_recv, _RecvFrom}, StateName, State) -> + {next_state, StateName, State#state{timer = undefined}, get_timeout(State)}; + handle_info(Msg, StateName, State) -> Report = io_lib:format("SSL: Got unexpected info: ~p ~n", [Msg]), error_logger:info_report(Report), @@ -1022,6 +1032,20 @@ terminate(_, _, #state{terminated = true}) -> %% we want to guarantee that Transport:close has been called %% when ssl:close/1 returns. ok; + +terminate({shutdown, transport_closed}, StateName, #state{send_queue = SendQueue, + renegotiation = Renegotiate} = State) -> + handle_unrecv_data(StateName, State), + handle_trusted_certs_db(State), + notify_senders(SendQueue), + notify_renegotiater(Renegotiate); + +terminate({shutdown, own_alert}, _StateName, #state{send_queue = SendQueue, + renegotiation = Renegotiate} = State) -> + handle_trusted_certs_db(State), + notify_senders(SendQueue), + notify_renegotiater(Renegotiate); + terminate(Reason, connection, #state{negotiated_version = Version, connection_states = ConnectionStates, transport_cb = Transport, @@ -1032,16 +1056,14 @@ terminate(Reason, connection, #state{negotiated_version = Version, notify_renegotiater(Renegotiate), BinAlert = terminate_alert(Reason, Version, ConnectionStates), Transport:send(Socket, BinAlert), - workaround_transport_delivery_problems(Socket, Transport, Reason), - Transport:close(Socket); + workaround_transport_delivery_problems(Socket, Transport); -terminate(Reason, _StateName, #state{transport_cb = Transport, +terminate(_Reason, _StateName, #state{transport_cb = Transport, socket = Socket, send_queue = SendQueue, renegotiation = Renegotiate} = State) -> handle_trusted_certs_db(State), notify_senders(SendQueue), notify_renegotiater(Renegotiate), - workaround_transport_delivery_problems(Socket, Transport, Reason), Transport:close(Socket). %%-------------------------------------------------------------------- @@ -1216,18 +1238,13 @@ init_diffie_hellman(DbHandle,_, DHParamFile, server) -> end. sync_send_all_state_event(FsmPid, Event) -> - sync_send_all_state_event(FsmPid, Event, infinity). - -sync_send_all_state_event(FsmPid, Event, Timeout) -> - try gen_fsm:sync_send_all_state_event(FsmPid, Event, Timeout) + try gen_fsm:sync_send_all_state_event(FsmPid, Event, infinity) catch exit:{noproc, _} -> {error, closed}; - exit:{timeout, _} -> - {error, timeout}; exit:{normal, _} -> {error, closed}; - exit:{shutdown, _} -> + exit:{{shutdown, _},_} -> {error, closed} end. @@ -1324,8 +1341,7 @@ new_server_hello(#server_hello{cipher_suite = CipherSuite, next_state(hello, certify, Record, State) catch #alert{} = Alert -> - handle_own_alert(Alert, Version, hello, State0), - {stop, normal, State0} + handle_own_alert(Alert, Version, hello, State0) end. resumed_server_hello(#state{session = Session, @@ -1345,8 +1361,7 @@ resumed_server_hello(#state{session = Session, {Record, State} = next_record(State2), next_state(hello, abbreviated, Record, State); #alert{} = Alert -> - handle_own_alert(Alert, Version, hello, State0), - {stop, normal, State0} + handle_own_alert(Alert, Version, hello, State0) end. handle_new_session(NewId, CipherSuite, Compression, #state{session = Session0} = State0) -> @@ -1371,8 +1386,7 @@ handle_resumed_session(SessId, #state{connection_states = ConnectionStates0, session = Session}), next_state(hello, abbreviated, Record, State); #alert{} = Alert -> - handle_own_alert(Alert, Version, hello, State0), - {stop, normal, State0} + handle_own_alert(Alert, Version, hello, State0) end. @@ -1389,8 +1403,7 @@ client_certify_and_key_exchange(#state{negotiated_version = Version} = next_state(certify, cipher, Record, State) catch throw:#alert{} = Alert -> - handle_own_alert(Alert, Version, certify, State0), - {stop, normal, State0} + handle_own_alert(Alert, Version, certify, State0) end. do_client_certify_and_key_exchange(State0) -> @@ -1769,6 +1782,7 @@ read_application_data(Data, #state{user_application = {_Mon, Pid}, socket_options = SOpts, bytes_to_read = BytesToRead, start_or_recv_from = RecvFrom, + timer = Timer, user_data_buffer = Buffer0} = State0) -> Buffer1 = if Buffer0 =:= <<>> -> Data; @@ -1778,9 +1792,11 @@ read_application_data(Data, #state{user_application = {_Mon, Pid}, case get_data(SOpts, BytesToRead, Buffer1) of {ok, ClientData, Buffer} -> % Send data SocketOpt = deliver_app_data(Socket, SOpts, ClientData, Pid, RecvFrom), + cancel_timer(Timer), State = State0#state{user_data_buffer = Buffer, start_or_recv_from = undefined, - bytes_to_read = 0, + timer = undefined, + bytes_to_read = undefined, socket_options = SocketOpt }, if @@ -1793,6 +1809,8 @@ read_application_data(Data, #state{user_application = {_Mon, Pid}, end; {more, Buffer} -> % no reply, we need more data next_record(State0#state{user_data_buffer = Buffer}); + {passive, Buffer} -> + next_record_if_active(State0#state{user_data_buffer = Buffer}); {error,_Reason} -> %% Invalid packet in packet mode deliver_packet_error(Socket, SOpts, Buffer1, Pid, RecvFrom), {stop, normal, State0} @@ -1834,6 +1852,9 @@ is_time_to_renegotiate(_,_) -> %% Picks ClientData get_data(_, _, <<>>) -> {more, <<>>}; +%% Recv timed out save buffer data until next recv +get_data(#socket_options{active=false}, undefined, Buffer) -> + {passive, Buffer}; get_data(#socket_options{active=Active, packet=Raw}, BytesToRead, Buffer) when Raw =:= raw; Raw =:= 0 -> %% Raw Mode if @@ -1962,8 +1983,7 @@ handle_tls_handshake(Handle, StateName, #state{tls_packets = [Packet | Packets]} end. next_state(Current,_, #alert{} = Alert, #state{negotiated_version = Version} = State) -> - handle_own_alert(Alert, Version, Current, State), - {stop, normal, State}; + handle_own_alert(Alert, Version, Current, State); next_state(_,Next, no_record, State) -> {next_state, Next, State, get_timeout(State)}; @@ -2001,8 +2021,7 @@ next_state(Current, Next, #ssl_tls{type = ?HANDSHAKE, fragment = Data}, State = State0#state{tls_packets = Packets, tls_handshake_buffer = Buf}, handle_tls_handshake(Handle, Next, State) catch throw:#alert{} = Alert -> - handle_own_alert(Alert, Version, Current, State0), - {stop, normal, State0} + handle_own_alert(Alert, Version, Current, State0) end; next_state(_, StateName, #ssl_tls{type = ?APPLICATION_DATA, fragment = Data}, State0) -> @@ -2141,7 +2160,6 @@ initial_state(Role, Host, Port, Socket, {SSLOptions, SocketOptions}, User, tls_record_buffer = <<>>, tls_cipher_texts = [], user_application = {Monitor, User}, - bytes_to_read = 0, user_data_buffer = <<>>, log_alert = true, session_cache_cb = SessionCacheCb, @@ -2258,13 +2276,13 @@ handle_alert(#alert{level = ?FATAL} = Alert, StateName, handle_alert(#alert{level = ?WARNING, description = ?CLOSE_NOTIFY} = Alert, StateName, State) -> handle_normal_shutdown(Alert, StateName, State), - {stop, normal, State}; + {stop, {shutdown, peer_close}, State}; handle_alert(#alert{level = ?WARNING, description = ?NO_RENEGOTIATION} = Alert, StateName, #state{log_alert = Log, renegotiation = {true, internal}} = State) -> log_alert(Log, StateName, Alert), handle_normal_shutdown(Alert, StateName, State), - {stop, normal, State}; + {stop, {shutdown, peer_close}, State}; handle_alert(#alert{level = ?WARNING, description = ?NO_RENEGOTIATION} = Alert, StateName, #state{log_alert = Log, renegotiation = {true, From}} = State0) -> @@ -2317,8 +2335,8 @@ handle_own_alert(Alert, Version, StateName, try %% Try to tell the other side {BinMsg, _} = encode_alert(Alert, Version, ConnectionStates), - linux_workaround_transport_delivery_problems(Alert, Socket), - Transport:send(Socket, BinMsg) + Transport:send(Socket, BinMsg), + workaround_transport_delivery_problems(Socket, Transport) catch _:_ -> %% Can crash if we are in a uninitialized state ignore end, @@ -2327,7 +2345,8 @@ handle_own_alert(Alert, Version, StateName, handle_normal_shutdown(Alert,StateName, State) catch _:_ -> ok - end. + end, + {stop, {shutdown, own_alert}, State}. handle_normal_shutdown(Alert, _, #state{socket = Socket, start_or_recv_from = StartFrom, @@ -2342,8 +2361,7 @@ handle_normal_shutdown(Alert, StateName, #state{socket = Socket, handle_unexpected_message(Msg, Info, #state{negotiated_version = Version} = State) -> Alert = ?ALERT_REC(?FATAL,?UNEXPECTED_MESSAGE), - handle_own_alert(Alert, Version, {Info, Msg}, State), - {stop, normal, State}. + handle_own_alert(Alert, Version, {Info, Msg}, State). make_premaster_secret({MajVer, MinVer}, rsa) -> Rand = ssl:random_bytes(?NUM_OF_PREMASTERSECRET_BYTES-2), @@ -2364,9 +2382,11 @@ ack_connection(#state{renegotiation = {true, From}} = State) -> gen_fsm:reply(From, ok), State#state{renegotiation = undefined}; ack_connection(#state{renegotiation = {false, first}, - start_or_recv_from = StartFrom} = State) when StartFrom =/= undefined -> + start_or_recv_from = StartFrom, + timer = Timer} = State) when StartFrom =/= undefined -> gen_fsm:reply(StartFrom, connected), - State#state{renegotiation = undefined, start_or_recv_from = undefined}; + cancel_timer(Timer), + State#state{renegotiation = undefined, start_or_recv_from = undefined, timer = undefined}; ack_connection(State) -> State. @@ -2401,36 +2421,35 @@ notify_renegotiater({true, From}) when not is_atom(From) -> notify_renegotiater(_) -> ok. -terminate_alert(Reason, Version, ConnectionStates) when Reason == normal; Reason == shutdown; +terminate_alert(Reason, Version, ConnectionStates) when Reason == normal; Reason == user_close -> {BinAlert, _} = encode_alert(?ALERT_REC(?WARNING, ?CLOSE_NOTIFY), Version, ConnectionStates), BinAlert; +terminate_alert({shutdown, _}, Version, ConnectionStates) -> + {BinAlert, _} = encode_alert(?ALERT_REC(?WARNING, ?CLOSE_NOTIFY), + Version, ConnectionStates), + BinAlert; + terminate_alert(_, Version, ConnectionStates) -> {BinAlert, _} = encode_alert(?ALERT_REC(?FATAL, ?INTERNAL_ERROR), Version, ConnectionStates), BinAlert. -workaround_transport_delivery_problems(_,_, user_close) -> - ok; -workaround_transport_delivery_problems(Socket, Transport, _) -> +workaround_transport_delivery_problems(Socket, gen_tcp = Transport) -> %% Standard trick to try to make sure all - %% data sent to to tcp port is really sent - %% before tcp port is closed so that the peer will - %% get a correct error message. + %% data sent to the tcp port is really delivered to the + %% peer application before tcp port is closed so that the peer will + %% get the correct TLS alert message and not only a transport close. inet:setopts(Socket, [{active, false}]), Transport:shutdown(Socket, write), - Transport:recv(Socket, 0). - -linux_workaround_transport_delivery_problems(#alert{level = ?FATAL}, Socket) -> - case os:type() of - {unix, linux} -> - inet:setopts(Socket, [{nodelay, true}]); - _ -> - ok - end; -linux_workaround_transport_delivery_problems(_, _) -> - ok. + %% Will return when other side has closed or after 30 s + %% e.g. we do not want to hang if something goes wrong + %% with the network but we want to maximise the odds that + %% peer application gets all data sent on the tcp connection. + Transport:recv(Socket, 0, 30000); +workaround_transport_delivery_problems(Socket, Transport) -> + Transport:close(Socket). get_timeout(#state{ssl_options=#ssl_options{hibernate_after = undefined}}) -> infinity; @@ -2503,3 +2522,31 @@ default_hashsign(_Version, KeyExchange) default_hashsign(_Version, KeyExchange) when KeyExchange == dh_anon -> {null, anon}. + +start_or_recv_cancel_timer(infinity, _RecvFrom) -> + undefined; +start_or_recv_cancel_timer(Timeout, RecvFrom) -> + erlang:send_after(Timeout, self(), {cancel_start_or_recv, RecvFrom}). + +cancel_timer(undefined) -> + ok; +cancel_timer(Timer) -> + erlang:cancel_timer(Timer). + +handle_unrecv_data(StateName, #state{socket = Socket, transport_cb = Transport} = State) -> + inet:setopts(Socket, [{active, false}]), + case Transport:recv(Socket, 0, 0) of + {error, closed} -> + ok; + {ok, Data} -> + handle_close_alert(Data, StateName, State) + end. + +handle_close_alert(Data, StateName, State0) -> + case next_tls_record(Data, State0) of + {#ssl_tls{type = ?ALERT, fragment = EncAlerts}, State} -> + [Alert|_] = decode_alerts(EncAlerts), + handle_normal_shutdown(Alert, StateName, State); + _ -> + ok + end. diff --git a/lib/ssl/src/ssl_handshake.erl b/lib/ssl/src/ssl_handshake.erl index fa1784714f..db21dac942 100644 --- a/lib/ssl/src/ssl_handshake.erl +++ b/lib/ssl/src/ssl_handshake.erl @@ -1401,6 +1401,7 @@ default_hash_signs() -> [?TLSEXT_SIGALG(sha512), ?TLSEXT_SIGALG(sha384), ?TLSEXT_SIGALG(sha256), + ?TLSEXT_SIGALG(sha224), ?TLSEXT_SIGALG(sha), ?TLSEXT_SIGALG_DSA(sha), ?TLSEXT_SIGALG_RSA(md5)]}. diff --git a/lib/ssl/src/ssl_manager.erl b/lib/ssl/src/ssl_manager.erl index 0cf4f2ce33..13689ce7d8 100644 --- a/lib/ssl/src/ssl_manager.erl +++ b/lib/ssl/src/ssl_manager.erl @@ -24,8 +24,6 @@ -module(ssl_manager). -behaviour(gen_server). --include("ssl_internal.hrl"). - %% Internal application API -export([start_link/1, start_link_dist/1, connection_init/2, cache_pem_file/2, diff --git a/lib/ssl/src/ssl_session.erl b/lib/ssl/src/ssl_session.erl index 2ad422fc03..a24b2d9444 100644 --- a/lib/ssl/src/ssl_session.erl +++ b/lib/ssl/src/ssl_session.erl @@ -72,15 +72,12 @@ valid_session(#session{time_stamp = TimeStamp}, LifeTime) -> server_id(Port, <<>>, _SslOpts, _Cert, _, _) -> {ssl_manager:new_session_id(Port), undefined}; -server_id(Port, SuggestedId, - #ssl_options{reuse_sessions = ReuseEnabled, - reuse_session = ReuseFun}, - Cert, Cache, CacheCb) -> +server_id(Port, SuggestedId, Options, Cert, Cache, CacheCb) -> LifeTime = case application:get_env(ssl, session_lifetime) of {ok, Time} when is_integer(Time) -> Time; _ -> ?'24H_in_sec' end, - case is_resumable(SuggestedId, Port, ReuseEnabled,ReuseFun, + case is_resumable(SuggestedId, Port, Options, Cache, CacheCb, LifeTime, Cert) of {true, Resumed} -> @@ -112,9 +109,9 @@ select_session(Sessions, #ssl_options{ciphers = Ciphers}, OwnCert) -> [[Id, _]|_] -> Id end. -is_resumable(_, _, false, _, _, _, _, _) -> +is_resumable(_, _, #ssl_options{reuse_sessions = false}, _, _, _, _) -> {false, undefined}; -is_resumable(SuggestedSessionId, Port, true, ReuseFun, Cache, +is_resumable(SuggestedSessionId, Port, #ssl_options{reuse_session = ReuseFun} = Options, Cache, CacheCb, SecondLifeTime, OwnCert) -> case CacheCb:lookup(Cache, {Port, SuggestedSessionId}) of #session{cipher_suite = CipherSuite, @@ -125,6 +122,7 @@ is_resumable(SuggestedSessionId, Port, true, ReuseFun, Cache, case resumable(IsResumable) andalso (OwnCert == SessionOwnCert) andalso valid_session(Session, SecondLifeTime) + andalso reusable_options(Options, Session) andalso ReuseFun(SuggestedSessionId, PeerCert, Compression, CipherSuite) of @@ -139,3 +137,9 @@ resumable(new) -> false; resumable(IsResumable) -> IsResumable. + +reusable_options(#ssl_options{fail_if_no_peer_cert = true, + verify = verify_peer}, Session) -> + (Session#session.peer_certificate =/= undefined); +reusable_options(_,_) -> + true. diff --git a/lib/ssl/test/erl_make_certs.erl b/lib/ssl/test/erl_make_certs.erl index 254aa6d2f9..d6bdd05d01 100644 --- a/lib/ssl/test/erl_make_certs.erl +++ b/lib/ssl/test/erl_make_certs.erl @@ -137,10 +137,10 @@ decode_key(PemBin, Pw) -> encode_key(Key = #'RSAPrivateKey'{}) -> {ok, Der} = 'OTP-PUB-KEY':encode('RSAPrivateKey', Key), - {'RSAPrivateKey', list_to_binary(Der), not_encrypted}; + {'RSAPrivateKey', Der, not_encrypted}; encode_key(Key = #'DSAPrivateKey'{}) -> {ok, Der} = 'OTP-PUB-KEY':encode('DSAPrivateKey', Key), - {'DSAPrivateKey', list_to_binary(Der), not_encrypted}. + {'DSAPrivateKey', Der, not_encrypted}. make_tbs(SubjectKey, Opts) -> Version = list_to_atom("v"++integer_to_list(proplists:get_value(version, Opts, 3))), diff --git a/lib/ssl/test/ssl_basic_SUITE.erl b/lib/ssl/test/ssl_basic_SUITE.erl index a202aca943..faed91e559 100644 --- a/lib/ssl/test/ssl_basic_SUITE.erl +++ b/lib/ssl/test/ssl_basic_SUITE.erl @@ -248,6 +248,7 @@ api_tests() -> [connection_info, peername, peercert, + peercert_with_client_cert, sockname, versions, controlling_process, @@ -258,7 +259,9 @@ api_tests() -> shutdown_both, shutdown_error, hibernate, - listen_socket + listen_socket, + ssl_accept_timeout, + ssl_recv_timeout ]. certificate_verify_tests() -> @@ -274,6 +277,7 @@ certificate_verify_tests() -> server_verify_client_once_passive, server_verify_client_once_active, server_verify_client_once_active_once, + new_server_wants_peer_cert, client_verify_none_passive, client_verify_none_active, client_verify_none_active_once, @@ -788,6 +792,43 @@ peercert(Config) when is_list(Config) -> peercert_result(Socket) -> ssl:peercert(Socket). +%%-------------------------------------------------------------------- + +peercert_with_client_cert(doc) -> + [""]; +peercert_with_client_cert(suite) -> + []; +peercert_with_client_cert(Config) when is_list(Config) -> + ClientOpts = ?config(client_dsa_opts, Config), + ServerOpts = ?config(server_dsa_verify_opts, Config), + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + + Server = ssl_test_lib:start_server([{node, ClientNode}, {port, 0}, + {from, self()}, + {mfa, {?MODULE, peercert_result, []}}, + {options, ServerOpts}]), + Port = ssl_test_lib:inet_port(Server), + Client = ssl_test_lib:start_client([{node, ServerNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {mfa, {?MODULE, peercert_result, []}}, + {options, ClientOpts}]), + + ServerCertFile = proplists:get_value(certfile, ServerOpts), + [{'Certificate', ServerBinCert, _}]= ssl_test_lib:pem_to_der(ServerCertFile), + ClientCertFile = proplists:get_value(certfile, ClientOpts), + [{'Certificate', ClientBinCert, _}]= ssl_test_lib:pem_to_der(ClientCertFile), + + ServerMsg = {ok, ClientBinCert}, + ClientMsg = {ok, ServerBinCert}, + + test_server:format("Testcase ~p, Client ~p Server ~p ~n", + [self(), Client, Server]), + + ssl_test_lib:check_result(Server, ServerMsg, Client, ClientMsg), + + ssl_test_lib:close(Server), + ssl_test_lib:close(Client). %%-------------------------------------------------------------------- sockname(doc) -> @@ -3610,9 +3651,14 @@ no_reuses_session_server_restart_new_cert(Config) when is_list(Config) -> %% Make sure session is registered test_server:sleep(?SLEEP), + Monitor = erlang:monitor(process, Server), ssl_test_lib:close(Server), ssl_test_lib:close(Client0), - + receive + {'DOWN', Monitor, _, _, _} -> + ok + end, + Server1 = ssl_test_lib:start_server([{node, ServerNode}, {port, Port}, {from, self()}, @@ -3719,10 +3765,14 @@ reuseaddr(Config) when is_list(Config) -> {from, self()}, {mfa, {ssl_test_lib, no_result, []}}, {options, [{active, false} | ClientOpts]}]), - test_server:sleep(?SLEEP), + Monitor = erlang:monitor(process, Server), ssl_test_lib:close(Server), ssl_test_lib:close(Client), - + receive + {'DOWN', Monitor, _, _, _} -> + ok + end, + Server1 = ssl_test_lib:start_server([{node, ServerNode}, {port, Port}, {from, self()}, @@ -3805,6 +3855,61 @@ listen_socket(Config) -> {error, enotconn} = ssl:shutdown(ListenSocket, read_write), ok = ssl:close(ListenSocket). +%%-------------------------------------------------------------------- +ssl_accept_timeout(doc) -> + ["Test ssl:ssl_accept timeout"]; +ssl_accept_timeout(suite) -> + []; +ssl_accept_timeout(Config) -> + process_flag(trap_exit, true), + ServerOpts = ?config(server_opts, Config), + {_, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + Server = ssl_test_lib:start_server([{node, ServerNode}, {port, 0}, + {from, self()}, + {timeout, 5000}, + {mfa, {ssl_test_lib, + no_result_msg, []}}, + {options, ServerOpts}]), + Port = ssl_test_lib:inet_port(Server), + {ok, CSocket} = gen_tcp:connect(Hostname, Port, [binary, {active, true}]), + + receive + {tcp_closed, CSocket} -> + ssl_test_lib:check_result(Server, {error, timeout}), + receive + {'EXIT', Server, _} -> + [] = supervisor:which_children(ssl_connection_sup) + end + end. + +%%-------------------------------------------------------------------- +ssl_recv_timeout(doc) -> + ["Test ssl:ssl_accept timeout"]; +ssl_recv_timeout(suite) -> + []; +ssl_recv_timeout(Config) -> + ServerOpts = ?config(server_opts, Config), + ClientOpts = ?config(client_opts, Config), + + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + + Server = + ssl_test_lib:start_server([{node, ServerNode}, {port, 0}, + {from, self()}, + {mfa, {?MODULE, send_recv_result_timeout_server, []}}, + {options, [{active, false} | ServerOpts]}]), + Port = ssl_test_lib:inet_port(Server), + + Client = ssl_test_lib:start_client([{node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {mfa, {?MODULE, + send_recv_result_timeout_client, []}}, + {options, [{active, false} | ClientOpts]}]), + + ssl_test_lib:check_result(Client, ok, Server, ok), + ssl_test_lib:close(Server), + ssl_test_lib:close(Client). %%-------------------------------------------------------------------- @@ -4041,6 +4146,67 @@ client_server_opts({KeyAlgo,_,_}, Config) when KeyAlgo == dss orelse KeyAlgo == {?config(client_dsa_opts, Config), ?config(server_dsa_opts, Config)}. + +%%-------------------------------------------------------------------- + +new_server_wants_peer_cert(doc) -> + ["Test that server configured to do client certification does" + " not reuse session without a client certificate."]; +new_server_wants_peer_cert(suite) -> + []; +new_server_wants_peer_cert(Config) when is_list(Config) -> + ServerOpts = ?config(server_opts, Config), + VServerOpts = [{verify, verify_peer}, {fail_if_no_peer_cert, true} + | ?config(server_verification_opts, Config)], + ClientOpts = ?config(client_verification_opts, Config), + + {ClientNode, ServerNode, Hostname} = ssl_test_lib:run_where(Config), + + Server = + ssl_test_lib:start_server([{node, ServerNode}, {port, 0}, + {from, self()}, + {mfa, {?MODULE, peercert_result, []}}, + {options, [ServerOpts]}]), + Port = ssl_test_lib:inet_port(Server), + Client = + ssl_test_lib:start_client([{node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {mfa, {ssl_test_lib, no_result, []}}, + {options, ClientOpts}]), + + Monitor = erlang:monitor(process, Server), + ssl_test_lib:close(Server), + ssl_test_lib:close(Client), + receive + {'DOWN', Monitor, _, _, _} -> + ok + end, + + Server1 = ssl_test_lib:start_server([{node, ServerNode}, {port, Port}, + {from, self()}, + {mfa, {?MODULE, peercert_result, []}}, + {options, VServerOpts}]), + Client1 = + ssl_test_lib:start_client([{node, ClientNode}, {port, Port}, + {host, Hostname}, + {from, self()}, + {mfa, {ssl_test_lib, no_result, []}}, + {options, [ClientOpts]}]), + + CertFile = proplists:get_value(certfile, ClientOpts), + [{'Certificate', BinCert, _}]= ssl_test_lib:pem_to_der(CertFile), + + ServerMsg = {error, no_peercert}, + Sever1Msg = {ok, BinCert}, + + ssl_test_lib:check_result(Server, ServerMsg, Server1, Sever1Msg), + + ssl_test_lib:close(Server1), + ssl_test_lib:close(Client), + ssl_test_lib:close(Client1). + + %%-------------------------------------------------------------------- %%% Internal functions %%-------------------------------------------------------------------- @@ -4049,6 +4215,23 @@ send_recv_result(Socket) -> {ok,"Hello world"} = ssl:recv(Socket, 11), ok. +send_recv_result_timeout_client(Socket) -> + {error, timeout} = ssl:recv(Socket, 11, 500), + ssl:send(Socket, "Hello world"), + receive + Msg -> + io:format("Msg ~p~n",[Msg]) + after 500 -> + ok + end, + {ok, "Hello world"} = ssl:recv(Socket, 11, 500), + ok. +send_recv_result_timeout_server(Socket) -> + ssl:send(Socket, "Hello"), + {ok, "Hello world"} = ssl:recv(Socket, 11), + ssl:send(Socket, " world"), + ok. + recv_close(Socket) -> {error, closed} = ssl:recv(Socket, 11), receive diff --git a/lib/ssl/test/ssl_test_lib.erl b/lib/ssl/test/ssl_test_lib.erl index 63731ee25c..f1f5b9ae0a 100644 --- a/lib/ssl/test/ssl_test_lib.erl +++ b/lib/ssl/test/ssl_test_lib.erl @@ -72,7 +72,13 @@ run_server(Opts) -> run_server(ListenSocket, Opts). run_server(ListenSocket, Opts) -> - AcceptSocket = connect(ListenSocket, Opts), + do_run_server(ListenSocket, connect(ListenSocket, Opts), Opts). + +do_run_server(_, {error, timeout} = Result, Opts) -> + Pid = proplists:get_value(from, Opts), + Pid ! {self(), Result}; + +do_run_server(ListenSocket, AcceptSocket, Opts) -> Node = proplists:get_value(node, Opts), Pid = proplists:get_value(from, Opts), {Module, Function, Args} = proplists:get_value(mfa, Opts), @@ -102,7 +108,8 @@ run_server(ListenSocket, Opts) -> connect(ListenSocket, Opts) -> Node = proplists:get_value(node, Opts), ReconnectTimes = proplists:get_value(reconnect_times, Opts, 0), - AcceptSocket = connect(ListenSocket, Node, 1 + ReconnectTimes, dummy), + Timeout = proplists:get_value(timeout, Opts, infinity), + AcceptSocket = connect(ListenSocket, Node, 1 + ReconnectTimes, dummy, Timeout), case ReconnectTimes of 0 -> AcceptSocket; @@ -111,15 +118,21 @@ connect(ListenSocket, Opts) -> AcceptSocket end. -connect(_, _, 0, AcceptSocket) -> +connect(_, _, 0, AcceptSocket, _) -> AcceptSocket; -connect(ListenSocket, Node, N, _) -> +connect(ListenSocket, Node, N, _, Timeout) -> test_server:format("ssl:transport_accept(~p)~n", [ListenSocket]), {ok, AcceptSocket} = rpc:call(Node, ssl, transport_accept, [ListenSocket]), - test_server:format("ssl:ssl_accept(~p)~n", [AcceptSocket]), - ok = rpc:call(Node, ssl, ssl_accept, [AcceptSocket]), - connect(ListenSocket, Node, N-1, AcceptSocket). + test_server:format("ssl:ssl_accept(~p, ~p)~n", [AcceptSocket, Timeout]), + + case rpc:call(Node, ssl, ssl_accept, [AcceptSocket, Timeout]) of + ok -> + connect(ListenSocket, Node, N-1, AcceptSocket, Timeout); + Result -> + Result + end. + remove_close_msg(0) -> ok; diff --git a/lib/ssl/test/ssl_to_openssl_SUITE.erl b/lib/ssl/test/ssl_to_openssl_SUITE.erl index 98ef050b14..f4e19b3f87 100644 --- a/lib/ssl/test/ssl_to_openssl_SUITE.erl +++ b/lib/ssl/test/ssl_to_openssl_SUITE.erl @@ -1080,14 +1080,13 @@ ssl2_erlang_server_openssl_client(Config) when is_list(Config) -> OpenSslPort = open_port({spawn, Cmd}, [stderr_to_stdout]), port_command(OpenSslPort, Data), - + receive + {'EXIT', OpenSslPort, _} -> + ok + + end, ssl_test_lib:check_result(Server, {error,"protocol version"}), - - %% Clean close down! Server needs to be closed first !! - ssl_test_lib:close(Server), - close_port(OpenSslPort), - process_flag(trap_exit, false), - ok. + process_flag(trap_exit, false). %%-------------------------------------------------------------------- erlang_client_openssl_server_npn(doc) -> diff --git a/lib/ssl/vsn.mk b/lib/ssl/vsn.mk index e381b73c27..adfb29e639 100644 --- a/lib/ssl/vsn.mk +++ b/lib/ssl/vsn.mk @@ -1 +1 @@ -SSL_VSN = 5.1 +SSL_VSN = 5.1.2 diff --git a/lib/stdlib/doc/src/notes.xml b/lib/stdlib/doc/src/notes.xml index b4d9f9a444..2a308cbe09 100644 --- a/lib/stdlib/doc/src/notes.xml +++ b/lib/stdlib/doc/src/notes.xml @@ -30,6 +30,21 @@ </header> <p>This document describes the changes made to the STDLIB application.</p> +<section><title>STDLIB 1.18.3</title> + + <section><title>Fixed Bugs and Malfunctions</title> + <list> + <item> + <p> + Minor test updates</p> + <p> + Own Id: OTP-10591</p> + </item> + </list> + </section> + +</section> + <section><title>STDLIB 1.18.2</title> <section><title>Fixed Bugs and Malfunctions</title> diff --git a/lib/stdlib/src/erl_expand_records.erl b/lib/stdlib/src/erl_expand_records.erl index 9759a8f001..85defacc43 100644 --- a/lib/stdlib/src/erl_expand_records.erl +++ b/lib/stdlib/src/erl_expand_records.erl @@ -381,9 +381,6 @@ expr({call,Line,{record_field,_,_,_}=M,As0}, St0) -> expr({call,Line,{remote,Lr,M,F},As0}, St0) -> {[M1,F1 | As1],St1} = expr_list([M,F | As0], St0), {{call,Line,{remote,Lr,M1,F1},As1},St1}; -expr({call,Line,{tuple,Lt,[{atom,_,_}=M,{atom,_,_}=F]},As0}, St0) -> - {As,St1} = expr_list(As0, St0), - {{call,Line,{tuple,Lt,[M,F]},As},St1}; expr({call,Line,F,As0}, St0) -> {[Fun1 | As1],St1} = expr_list([F | As0], St0), {{call,Line,Fun1,As1},St1}; diff --git a/lib/stdlib/test/dict_SUITE.erl b/lib/stdlib/test/dict_SUITE.erl index c46fc47b34..df9c769c67 100644 --- a/lib/stdlib/test/dict_SUITE.erl +++ b/lib/stdlib/test/dict_SUITE.erl @@ -53,7 +53,7 @@ end_per_group(_GroupName, Config) -> init_per_testcase(_Case, Config) -> - ?line Dog = ?t:timetrap(?t:minutes(5)), + Dog = ?t:timetrap(?t:minutes(5)), [{watchdog,Dog}|Config]. end_per_testcase(_Case, Config) -> @@ -65,22 +65,22 @@ create(Config) when is_list(Config) -> test_all(fun create_1/1). create_1(M) -> - ?line D0 = M:empty(), - ?line [] = M:to_list(D0), - ?line 0 = M:size(D0), + D0 = M(empty, []), + [] = M(to_list, D0), + 0 = M(size, D0), D0. store(Config) when is_list(Config) -> test_all([{0,132},{253,258},{510,514}], fun store_1/2). store_1(List, M) -> - ?line D0 = M:from_list(List), + D0 = M(from_list, List), %% Make sure that we get the same result by inserting %% elements one at the time. - ?line D1 = foldl(fun({K,V}, Dict) -> M:enter(K, V, Dict) end, - M:empty(), List), - ?line true = M:equal(D0, D1), + D1 = foldl(fun({K,V}, Dict) -> M(enter, {K,V,Dict}) end, + M(empty, []), List), + true = M(equal, {D0,D1}), D0. %%% @@ -98,7 +98,7 @@ dict_mods() -> [Orddict,Dict,Gb]. test_all(Tester) -> - ?line Pids = [spawn_tester(M, Tester) || M <- dict_mods()], + Pids = [spawn_tester(M, Tester) || M <- dict_mods()], collect_all(Pids, []). spawn_tester(M, Tester) -> @@ -106,7 +106,7 @@ spawn_tester(M, Tester) -> spawn_link(fun() -> random:seed(1, 2, 42), S = Tester(M), - Res = {M:size(S),lists:sort(M:to_list(S))}, + Res = {M(size, S),lists:sort(M(to_list, S))}, Parent ! {result,self(),Res} end). diff --git a/lib/stdlib/test/dict_test_lib.erl b/lib/stdlib/test/dict_test_lib.erl index 92a75dad89..7167014310 100644 --- a/lib/stdlib/test/dict_test_lib.erl +++ b/lib/stdlib/test/dict_test_lib.erl @@ -17,67 +17,48 @@ %% %CopyrightEnd% %% --module(dict_test_lib, [Mod,Equal]). +-module(dict_test_lib). --export([module/0,equal/2,empty/0,size/1,to_list/1,from_list/1, - enter/3,delete/2,lookup/2]). +-export([new/2]). -module() -> - Mod. - -equal(X, Y) -> - Equal(X, Y). +new(Mod, Eq) -> + fun (enter, {K,V,D}) -> enter(Mod, K, V, D); + (empty, []) -> empty(Mod); + (equal, {D1,D2}) -> Eq(D1, D2); + (from_list, L) -> from_list(Mod, L); + (module, []) -> Mod; + (size, D) -> Mod:size(D); + (to_list, D) -> to_list(Mod, D) + end. -empty() -> +empty(Mod) -> case erlang:function_exported(Mod, new, 0) of false -> Mod:empty(); true -> Mod:new() end. -size(S) -> - Mod:size(S). - -to_list(S) -> - Mod:to_list(S). +to_list(Mod, D) -> + Mod:to_list(D). -from_list(S) -> +from_list(Mod, L) -> case erlang:function_exported(Mod, from_orddict, 1) of false -> - Mod:from_list(S); + Mod:from_list(L); true -> %% The gb_trees module has no from_list/1 function. %% %% The keys in S are not unique. To make sure %% that we pick the same key/value pairs as %% dict/orddict, first convert the list to an orddict. - Orddict = orddict:from_list(S), + Orddict = orddict:from_list(L), Mod:from_orddict(Orddict) end. %% Store new value into dictionary or update previous value in dictionary. -enter(Key, Val, Dict) -> +enter(Mod, Key, Val, Dict) -> case erlang:function_exported(Mod, store, 3) of false -> Mod:enter(Key, Val, Dict); true -> Mod:store(Key, Val, Dict) end. - -%% Delete an EXISTING key. -delete(Key, Dict) -> - case erlang:function_exported(Mod, delete, 2) of - true -> Mod:delete(Key, Dict); - false -> Mod:erase(Key, Dict) - end. - -%% -> none | {value,Value} -lookup(Key, Dict) -> - case erlang:function_exported(Mod, lookup, 2) of - false -> - case Mod:find(Key, Dict) of - error -> none; - {ok,Value} -> {value,Value} - end; - true -> - Mod:lookup(Key, Dict) - end. diff --git a/lib/stdlib/test/epp_SUITE.erl b/lib/stdlib/test/epp_SUITE.erl index f79414db49..77c615d6d9 100644 --- a/lib/stdlib/test/epp_SUITE.erl +++ b/lib/stdlib/test/epp_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 1998-2011. All Rights Reserved. +%% Copyright Ericsson AB 1998-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -1236,6 +1236,13 @@ otp_8911(doc) -> otp_8911(suite) -> []; otp_8911(Config) when is_list(Config) -> + case test_server:is_cover() of + true -> + {skip, "Testing cover, so can not run when cover is already running"}; + false -> + do_otp_8911(Config) + end. +do_otp_8911(Config) -> ?line {ok, CWD} = file:get_cwd(), ?line ok = file:set_cwd(?config(priv_dir, Config)), diff --git a/lib/stdlib/test/ets_SUITE.erl b/lib/stdlib/test/ets_SUITE.erl index d5c1c5276e..dc17e5d33c 100644 --- a/lib/stdlib/test/ets_SUITE.erl +++ b/lib/stdlib/test/ets_SUITE.erl @@ -2170,20 +2170,29 @@ heir_do(Opts) -> ?line undefined = ets:info(foo), %% When heir dies and pid reused before founder dies - NextPidIx = erts_debug:get_internal_state(next_pid), - {Founder4,MrefF4} = my_spawn_monitor(fun()->heir_founder(Master,"The dying heir",Opts)end), - {Heir4,MrefH4} = my_spawn_monitor(fun()->heir_heir(Founder4)end), - Founder4 ! {go, Heir4}, - ?line {'DOWN', MrefH4, process, Heir4, normal} = receive_any(), - erts_debug:set_internal_state(next_pid, NextPidIx), - {Heir4,MrefH4_B} = spawn_monitor_with_pid(Heir4, - fun()-> ?line die_please = receive_any() end), - Founder4 ! die_please, - ?line {'DOWN', MrefF4, process, Founder4, normal} = receive_any(), - Heir4 ! die_please, - ?line {'DOWN', MrefH4_B, process, Heir4, normal} = receive_any(), - ?line undefined = ets:info(foo), - + repeat_while(fun() -> + NextPidIx = erts_debug:get_internal_state(next_pid), + {Founder4,MrefF4} = my_spawn_monitor(fun()->heir_founder(Master,"The dying heir",Opts)end), + {Heir4,MrefH4} = my_spawn_monitor(fun()->heir_heir(Founder4)end), + Founder4 ! {go, Heir4}, + ?line {'DOWN', MrefH4, process, Heir4, normal} = receive_any(), + erts_debug:set_internal_state(next_pid, NextPidIx), + DoppelGanger = spawn_monitor_with_pid(Heir4, + fun()-> ?line die_please = receive_any() end), + Founder4 ! die_please, + ?line {'DOWN', MrefF4, process, Founder4, normal} = receive_any(), + case DoppelGanger of + {Heir4,MrefH4_B} -> + Heir4 ! die_please, + ?line {'DOWN', MrefH4_B, process, Heir4, normal} = receive_any(), + ?line undefined = ets:info(foo), + false; + failed -> + io:format("Failed to spawn process with pid ~p\n", [Heir4]), + true % try again + end + end), + ?line verify_etsmem(EtsMem). heir_founder(Master, HeirData, Opts) -> @@ -5787,25 +5796,20 @@ receive_any_spinning(Loops, N, Tries) when N>0 -> spawn_monitor_with_pid(Pid, Fun) when is_pid(Pid) -> - spawn_monitor_with_pid(Pid, Fun, 1, 10). + spawn_monitor_with_pid(Pid, Fun, 10). -spawn_monitor_with_pid(Pid, Fun, N, M) when N > M*10 -> - spawn_monitor_with_pid(Pid, Fun, N, M*10); -spawn_monitor_with_pid(Pid, Fun, N, M) -> - ?line false = is_process_alive(Pid), +spawn_monitor_with_pid(_, _, 0) -> + failed; +spawn_monitor_with_pid(Pid, Fun, N) -> case my_spawn(fun()-> case self() of Pid -> Fun(); _ -> die end end) of - Pid -> + Pid -> {Pid, erlang:monitor(process, Pid)}; Other -> - case N rem M of - 0 -> io:format("Failed ~p times to get pid ~p (current = ~p)\n",[N,Pid,Other]); - _ -> ok - end, - spawn_monitor_with_pid(Pid,Fun,N+1,M) + spawn_monitor_with_pid(Pid,Fun,N-1) end. diff --git a/lib/stdlib/test/io_proto_SUITE.erl b/lib/stdlib/test/io_proto_SUITE.erl index 661d57c85b..17e69f7c1c 100644 --- a/lib/stdlib/test/io_proto_SUITE.erl +++ b/lib/stdlib/test/io_proto_SUITE.erl @@ -96,7 +96,8 @@ groups() -> []. init_per_suite(Config) -> - Config. + DefShell = get_default_shell(), + [{default_shell,DefShell}|Config]. end_per_suite(_Config) -> ok. @@ -124,20 +125,25 @@ unicode_prompt(doc) -> ["Test that an Unicode prompt does not crash the shell"]; unicode_prompt(Config) when is_list(Config) -> ?line PA = filename:dirname(code:which(?MODULE)), - ?line rtnode([{putline,""}, - {putline, "2."}, - {getline, "2"}, - {putline, "shell:prompt_func({io_proto_SUITE,uprompt})."}, - {getline, "default"}, - {putline, "io:get_line('')."}, - {putline, "hej"}, - {getline, "\"hej\\n\""}, - {putline, "io:setopts([{binary,true}])."}, - {getline, "ok"}, - {putline, "io:get_line('')."}, - {putline, "hej"}, - {getline, "<<\"hej\\n\">>"} - ],[],[],"-pa \""++ PA++"\""), + case proplists:get_value(default_shell,Config) of + old -> + ok; + new -> + ?line rtnode([{putline,""}, + {putline, "2."}, + {getline, "2"}, + {putline, "shell:prompt_func({io_proto_SUITE,uprompt})."}, + {getline, "default"}, + {putline, "io:get_line('')."}, + {putline, "hej"}, + {getline, "\"hej\\n\""}, + {putline, "io:setopts([{binary,true}])."}, + {getline, "ok"}, + {putline, "io:get_line('')."}, + {putline, "hej"}, + {getline, "<<\"hej\\n\">>"} + ],[],[],"-pa \""++ PA++"\"") + end, %% And one with oldshell ?line rtnode([{putline,""}, {putline, "2."}, @@ -234,21 +240,26 @@ setopts_getopts(Config) when is_list(Config) -> lists:sort(io:getopts(RFile)), ?line eof = io:get_line(RFile,''), ?line file:close(RFile), - %% So, lets test another node with new interactive shell - ?line rtnode([{putline,""}, - {putline, "2."}, - {getline, "2"}, - {putline, "lists:keyfind(binary,1,io:getopts())."}, - {getline, "{binary,false}"}, - {putline, "io:get_line('')."}, - {putline, "hej"}, - {getline, "\"hej\\n\""}, - {putline, "io:setopts([{binary,true}])."}, - {getline, "ok"}, - {putline, "io:get_line('')."}, - {putline, "hej"}, - {getline, "<<\"hej\\n\">>"} - ],[]), + case proplists:get_value(default_shell,Config) of + old -> + ok; + new -> + %% So, lets test another node with new interactive shell + ?line rtnode([{putline,""}, + {putline, "2."}, + {getline, "2"}, + {putline, "lists:keyfind(binary,1,io:getopts())."}, + {getline, "{binary,false}"}, + {putline, "io:get_line('')."}, + {putline, "hej"}, + {getline, "\"hej\\n\""}, + {putline, "io:setopts([{binary,true}])."}, + {getline, "ok"}, + {putline, "io:get_line('')."}, + {putline, "hej"}, + {getline, "<<\"hej\\n\">>"} + ],[]) + end, %% And one with oldshell ?line rtnode([{putline,""}, {putline, "2."}, @@ -433,21 +444,27 @@ unicode_options(Config) when is_list(Config) -> end, ?line [ ok = CannotWriteFile(F,FailDir) || F <- AllNoBom ], - %% OK, time for the group_leaders... - ?line rtnode([{putline,""}, - {putline, "2."}, - {getline, "2"}, - {putline, "lists:keyfind(encoding,1,io:getopts())."}, - {getline, "{encoding,latin1}"}, - {putline, "io:format(\"~ts~n\",[[1024]])."}, - {getline, "\\x{400}"}, - {putline, "io:setopts([unicode])."}, - {getline, "ok"}, - {putline, "io:format(\"~ts~n\",[[1024]])."}, - {getline, - binary_to_list(unicode:characters_to_binary( - [1024],unicode,utf8))} - ],[],"LC_CTYPE=\""++get_lc_ctype()++"\"; export LC_CTYPE; "), + case proplists:get_value(default_shell,Config) of + old -> + ok; + new -> + %% OK, time for the group_leaders... + ?line rtnode([{putline,""}, + {putline, "2."}, + {getline, "2"}, + {putline, "lists:keyfind(encoding,1,io:getopts())."}, + {getline, "{encoding,latin1}"}, + {putline, "io:format(\"~ts~n\",[[1024]])."}, + {getline, "\\x{400}"}, + {putline, "io:setopts([unicode])."}, + {getline, "ok"}, + {putline, "io:format(\"~ts~n\",[[1024]])."}, + {getline, + binary_to_list(unicode:characters_to_binary( + [1024],unicode,utf8))} + ],[],"LC_CTYPE=\""++get_lc_ctype()++"\"; " + "export LC_CTYPE; ") + end, ?line rtnode([{putline,""}, {putline, "2."}, {getline_re, ".*2."}, @@ -680,23 +697,28 @@ binary_options(Config) when is_list(Config) -> ?line file:close(F3), %% OK, time for the group_leaders... %% io:format(standard_error,"Hmmm:~w~n",["<<\""++binary_to_list(<<"\345\344\366"/utf8>>)++"\\n\">>"]), - ?line rtnode([{putline,""}, - {putline, "2."}, - {getline, "2"}, - {putline, "lists:keyfind(binary,1,io:getopts())."}, - {getline, "{binary,false}"}, - {putline, "io:get_line('')."}, - {putline, "hej"}, - {getline, "\"hej\\n\""}, - {putline, "io:setopts([{binary,true},unicode])."}, - {getline, "ok"}, - {putline, "io:get_line('')."}, - {putline, "hej"}, - {getline, "<<\"hej\\n\">>"}, - {putline, "io:get_line('')."}, - {putline, binary_to_list(<<"\345\344\366"/utf8>>)}, - {getline, "<<\""++binary_to_list(unicode:characters_to_binary(<<"\345\344\366"/utf8>>,latin1,utf8))++"\\n\">>"} - ],[]), + case proplists:get_value(default_shell,Config) of + old -> + ok; + new -> + ?line rtnode([{putline,""}, + {putline, "2."}, + {getline, "2"}, + {putline, "lists:keyfind(binary,1,io:getopts())."}, + {getline, "{binary,false}"}, + {putline, "io:get_line('')."}, + {putline, "hej"}, + {getline, "\"hej\\n\""}, + {putline, "io:setopts([{binary,true},unicode])."}, + {getline, "ok"}, + {putline, "io:get_line('')."}, + {putline, "hej"}, + {getline, "<<\"hej\\n\">>"}, + {putline, "io:get_line('')."}, + {putline, binary_to_list(<<"\345\344\366"/utf8>>)}, + {getline, "<<\""++binary_to_list(unicode:characters_to_binary(<<"\345\344\366"/utf8>>,latin1,utf8))++"\\n\">>"} + ],[]) + end, %% And one with oldshell ?line rtnode([{putline,""}, {putline, "2."}, @@ -1146,9 +1168,11 @@ read_modes_gl(suite) -> read_modes_gl(doc) -> ["Test various modes when reading from the group leade from another machine"]; read_modes_gl(Config) when is_list(Config) -> - case get_progs() of - {error,Reason} -> + case {get_progs(),proplists:get_value(default_shell,Config)} of + {{error,Reason},_} -> {skipped,Reason}; + {_,old} -> + {skipper,"No new shell"}; _ -> read_modes_gl_1(Config,answering_machine1) end. @@ -1754,6 +1778,17 @@ get_data_within(Port, Timeout, Acc) -> timeout end. +get_default_shell() -> + try + rtnode([{putline,""}, + {putline, "whereis(user_drv)."}, + {getline, "undefined"}],[]), + old + catch E:R -> + ?dbg({E,R}), + new + end. + %% %% Test I/O-server %% diff --git a/lib/stdlib/test/sets_SUITE.erl b/lib/stdlib/test/sets_SUITE.erl index f284276bd7..e2bcdd18ce 100644 --- a/lib/stdlib/test/sets_SUITE.erl +++ b/lib/stdlib/test/sets_SUITE.erl @@ -35,7 +35,7 @@ -import(lists, [foldl/3,reverse/1]). init_per_testcase(_Case, Config) -> - ?line Dog = ?t:timetrap(?t:minutes(5)), + Dog = ?t:timetrap(?t:minutes(5)), [{watchdog,Dog}|Config]. end_per_testcase(_Case, Config) -> @@ -70,65 +70,65 @@ create(Config) when is_list(Config) -> test_all(fun create_1/1). create_1(M) -> - ?line S0 = M:empty(), - ?line [] = M:to_list(S0), - ?line 0 = M:size(S0), - ?line true = M:is_empty(S0), + S0 = M(empty, []), + [] = M(to_list, S0), + 0 = M(size, S0), + true = M(is_empty, S0), E = make_ref(), - ?line One = M:singleton(E), - ?line 1 = M:size(One), - ?line false = M:is_empty(One), - [E] = M:to_list(One), + One = M(singleton, E), + 1 = M(size, One), + false = M(is_empty, One), + [E] = M(to_list, One), S0. add_element(Config) when is_list(Config) -> test_all([{0,132},{253,258},{510,514}], fun add_element_1/2). add_element_1(List, M) -> - ?line S = M:from_list(List), - ?line SortedSet = lists:usort(List), - ?line SortedSet = lists:sort(M:to_list(S)), + S = M(from_list, List), + SortedSet = lists:usort(List), + SortedSet = lists:sort(M(to_list, S)), %% Make sure that we get the same result by inserting %% elements one at the time. - ?line S2 = foldl(fun(El, Set) -> M:add_element(El, Set) end, - M:empty(), List), - ?line true = M:equal(S, S2), + S2 = foldl(fun(El, Set) -> M(add_element, {El,Set}) end, + M(empty, []), List), + true = M(equal, {S,S2}), %% Insert elements, randomly delete inserted elements, %% and re-inserted all deleted elements at the end. - ?line S3 = add_element_del(List, M, M:empty(), [], []), - ?line true = M:equal(S2, S3), - ?line true = M:equal(S, S3), + S3 = add_element_del(List, M, M(empty, []), [], []), + true = M(equal, {S2,S3}), + true = M(equal, {S,S3}), S. add_element_del([H|T], M, S, Del, []) -> - add_element_del(T, M, M:add_element(H, S), Del, [H]); + add_element_del(T, M, M(add_element, {H,S}), Del, [H]); add_element_del([H|T], M, S0, Del, Inserted) -> - S1 = M:add_element(H, S0), + S1 = M(add_element, {H,S0}), case random:uniform(3) of 1 -> OldEl = lists:nth(random:uniform(length(Inserted)), Inserted), - S = M:del_element(OldEl, S1), + S = M(del_element, {OldEl,S1}), add_element_del(T, M, S, [OldEl|Del], [H|Inserted]); _ -> add_element_del(T, M, S1, Del, [H|Inserted]) end; add_element_del([], M, S, Del, _) -> - M:union(S, M:from_list(Del)). + M(union, {S,M(from_list, Del)}). del_element(Config) when is_list(Config) -> test_all([{0,132},{253,258},{510,514},{1022,1026}], fun del_element_1/2). del_element_1(List, M) -> - ?line S0 = M:from_list(List), - ?line Empty = foldl(fun(El, Set) -> M:del_element(El, Set) end, S0, List), - ?line Empty = M:empty(), - ?line M:is_empty(Empty), - ?line S1 = foldl(fun(El, Set) -> - M:add_element(El, Set) - end, S0, reverse(List)), - ?line true = M:equal(S0, S1), + S0 = M(from_list, List), + Empty = foldl(fun(El, Set) -> M(del_element, {El,Set}) end, S0, List), + Empty = M(empty, []), + true = M(is_empty, Empty), + S1 = foldl(fun(El, Set) -> + M(add_element, {El,Set}) + end, S0, reverse(List)), + true = M(equal, {S0,S1}), S1. subtract(Config) when is_list(Config) -> @@ -138,23 +138,23 @@ subtract(Config) when is_list(Config) -> test_all([{2,69},{126,130},{253,258},511,512,{1023,1030}], fun subtract_1/2). subtract_empty(M) -> - ?line Empty = M:empty(), - ?line true = M:is_empty(M:subtract(Empty, Empty)), - M:subtract(Empty, Empty). + Empty = M(empty, []), + true = M(is_empty, M(subtract, {Empty,Empty})), + M(subtract, {Empty,Empty}). subtract_1(List, M) -> - ?line S0 = M:from_list(List), - ?line Empty = M:empty(), + S0 = M(from_list, List), + Empty = M(empty, []), %% Trivial cases. - ?line true = M:is_empty(M:subtract(Empty, S0)), - ?line true = M:equal(S0, M:subtract(S0, Empty)), + true = M(is_empty, M(subtract, {Empty,S0})), + true = M(equal, {S0,M(subtract, {S0,Empty})}), %% Not so trivial. - ?line subtract_check(List, mutate_some(remove_some(List, 0.4)), M), - ?line subtract_check(List, rnd_list(length(List) div 2 + 5), M), - ?line subtract_check(List, rnd_list(length(List) div 7 + 9), M), - ?line subtract_check(List, mutate_some(List), M). + subtract_check(List, mutate_some(remove_some(List, 0.4)), M), + subtract_check(List, rnd_list(length(List) div 2 + 5), M), + subtract_check(List, rnd_list(length(List) div 7 + 9), M), + subtract_check(List, mutate_some(List), M). subtract_check(A, B, M) -> one_subtract_check(B, A, M), @@ -163,12 +163,12 @@ subtract_check(A, B, M) -> one_subtract_check(A, B, M) -> ASorted = lists:usort(A), BSorted = lists:usort(B), - ASet = M:from_list(A), - BSet = M:from_list(B), - DiffSet = M:subtract(ASet, BSet), + ASet = M(from_list, A), + BSet = M(from_list, B), + DiffSet = M(subtract, {ASet,BSet}), Diff = ASorted -- BSorted, - true = M:equal(DiffSet, M:from_list(Diff)), - Diff = lists:sort(M:to_list(DiffSet)), + true = M(equal, {DiffSet,M(from_list, Diff)}), + Diff = lists:sort(M(to_list, DiffSet)), DiffSet. intersection(Config) when is_list(Config) -> @@ -176,60 +176,60 @@ intersection(Config) when is_list(Config) -> test_all([{1,65},{126,130},{253,259},{499,513},{1023,1025}], fun intersection_1/2). intersection_1(List, M) -> - ?line S0 = M:from_list(List), + S0 = M(from_list, List), %% Intersection with self. - ?line true = M:equal(S0, M:intersection(S0, S0)), - ?line true = M:equal(S0, M:intersection([S0,S0])), - ?line true = M:equal(S0, M:intersection([S0,S0,S0])), - ?line true = M:equal(S0, M:intersection([S0])), + true = M(equal, {S0,M(intersection, {S0,S0})}), + true = M(equal, {S0,M(intersection, [S0,S0])}), + true = M(equal, {S0,M(intersection, [S0,S0,S0])}), + true = M(equal, {S0,M(intersection, [S0])}), %% Intersection with empty. - ?line Empty = M:empty(), - ?line true = M:equal(Empty, M:intersection(S0, Empty)), - ?line true = M:equal(Empty, M:intersection([S0,Empty,S0,Empty])), + Empty = M(empty, []), + true = M(equal, {Empty,M(intersection, {S0,Empty})}), + true = M(equal, {Empty,M(intersection, [S0,Empty,S0,Empty])}), %% The intersection of no sets is undefined. - ?line {'EXIT',_} = (catch M:intersection([])), + {'EXIT',_} = (catch M(intersection, [])), %% Disjoint sets. - ?line Disjoint = [{El} || El <- List], - ?line DisjointSet = M:from_list(Disjoint), - ?line M:is_empty(M:intersection(S0, DisjointSet)), + Disjoint = [{El} || El <- List], + DisjointSet = M(from_list, Disjoint), + true = M(is_empty, M(intersection, {S0,DisjointSet})), %% Disjoint, different sizes. - ?line M:is_empty(M:intersection(S0, M:from_list(remove_some(Disjoint, 0.3)))), - ?line M:is_empty(M:intersection(S0, M:from_list(remove_some(Disjoint, 0.7)))), - ?line M:is_empty(M:intersection(S0, M:from_list(remove_some(Disjoint, 0.9)))), - ?line M:is_empty(M:intersection(M:from_list(remove_some(List, 0.3)), DisjointSet)), - ?line M:is_empty(M:intersection(M:from_list(remove_some(List, 0.5)), DisjointSet)), - ?line M:is_empty(M:intersection(M:from_list(remove_some(List, 0.9)), DisjointSet)), + [begin + SomeRemoved = M(from_list, remove_some(Disjoint, HowMuch)), + true = M(is_empty, M(intersection, {S0,SomeRemoved})), + MoreRemoved = M(from_list, remove_some(List, HowMuch)), + true = M(is_empty, M(intersection, {MoreRemoved,DisjointSet})) + end || HowMuch <- [0.3,0.5,0.7,0.9]], %% Partial overlap (one or more elements in result set). %% The sets have almost the same size. (Almost because a duplicated %% element in the original list could be mutated and not mutated %% at the same time.) - ?line PartialOverlap = mutate_some(List, []), - ?line IntersectionSet = check_intersection(List, PartialOverlap, M), - ?line false = M:is_empty(IntersectionSet), + PartialOverlap = mutate_some(List, []), + IntersectionSet = check_intersection(List, PartialOverlap, M), + false = M(is_empty, IntersectionSet), %% Partial overlap, different set sizes. (Intersection possibly empty.) - ?line check_intersection(List, remove_some(PartialOverlap, 0.1), M), - ?line check_intersection(List, remove_some(PartialOverlap, 0.3), M), - ?line check_intersection(List, remove_some(PartialOverlap, 0.5), M), - ?line check_intersection(List, remove_some(PartialOverlap, 0.7), M), - ?line check_intersection(List, remove_some(PartialOverlap, 0.9), M), + check_intersection(List, remove_some(PartialOverlap, 0.1), M), + check_intersection(List, remove_some(PartialOverlap, 0.3), M), + check_intersection(List, remove_some(PartialOverlap, 0.5), M), + check_intersection(List, remove_some(PartialOverlap, 0.7), M), + check_intersection(List, remove_some(PartialOverlap, 0.9), M), IntersectionSet. check_intersection(Orig, Mutated, M) -> - OrigSet = M:from_list(Orig), - MutatedSet = M:from_list(Mutated), + OrigSet = M(from_list, Orig), + MutatedSet = M(from_list, Mutated), Intersection = [El || El <- Mutated, not is_tuple(El)], SortedIntersection = lists:usort(Intersection), - IntersectionSet = M:intersection(OrigSet, MutatedSet), - true = M:equal(IntersectionSet, M:from_list(SortedIntersection)), - SortedIntersection = lists:sort(M:to_list(IntersectionSet)), + IntersectionSet = M(intersection, {OrigSet,MutatedSet}), + true = M(equal, {IntersectionSet,M(from_list, SortedIntersection)}), + SortedIntersection = lists:sort(M(to_list, IntersectionSet)), IntersectionSet. @@ -239,63 +239,63 @@ union(Config) when is_list(Config) -> test_all([{1,71},{125,129},{254,259},{510,513},{1023,1025}], fun union_1/2). union_1(List, M) -> - ?line S = M:from_list(List), + S = M(from_list, List), %% Union with self and empty. - ?line Empty = M:empty(), - ?line true = M:equal(S, M:union(S, S)), - ?line true = M:equal(S, M:union([S,S])), - ?line true = M:equal(S, M:union([S,S,Empty])), - ?line true = M:equal(S, M:union([S,Empty,S])), - ?line true = M:equal(S, M:union(S, Empty)), - ?line true = M:equal(S, M:union([S])), - ?line true = M:is_empty(M:union([])), + Empty = M(empty, []), + true = M(equal, {S,M(union, {S,S})}), + true = M(equal, {S,M(union, [S,S])}), + true = M(equal, {S,M(union, [S,S,Empty])}), + true = M(equal, {S,M(union, [S,Empty,S])}), + true = M(equal, {S,M(union, {S,Empty})}), + true = M(equal, {S,M(union, [S])}), + true = M(is_empty, M(union, [])), %% Partial overlap. - ?line check_union(List, remove_some(mutate_some(List), 0.9), M), - ?line check_union(List, remove_some(mutate_some(List), 0.7), M), - ?line check_union(List, remove_some(mutate_some(List), 0.5), M), - ?line check_union(List, remove_some(mutate_some(List), 0.3), M), - ?line check_union(List, remove_some(mutate_some(List), 0.1), M), - - ?line check_union(List, mutate_some(remove_some(List, 0.9)), M), - ?line check_union(List, mutate_some(remove_some(List, 0.7)), M), - ?line check_union(List, mutate_some(remove_some(List, 0.5)), M), - ?line check_union(List, mutate_some(remove_some(List, 0.3)), M), - ?line check_union(List, mutate_some(remove_some(List, 0.1)), M). + check_union(List, remove_some(mutate_some(List), 0.9), M), + check_union(List, remove_some(mutate_some(List), 0.7), M), + check_union(List, remove_some(mutate_some(List), 0.5), M), + check_union(List, remove_some(mutate_some(List), 0.3), M), + check_union(List, remove_some(mutate_some(List), 0.1), M), + + check_union(List, mutate_some(remove_some(List, 0.9)), M), + check_union(List, mutate_some(remove_some(List, 0.7)), M), + check_union(List, mutate_some(remove_some(List, 0.5)), M), + check_union(List, mutate_some(remove_some(List, 0.3)), M), + check_union(List, mutate_some(remove_some(List, 0.1)), M). check_union(Orig, Other, M) -> - OrigSet = M:from_list(Orig), - OtherSet = M:from_list(Other), + OrigSet = M(from_list, Orig), + OtherSet = M(from_list, Other), Union = Orig++Other, SortedUnion = lists:usort(Union), - UnionSet = M:union(OrigSet, OtherSet), - SortedUnion = lists:sort(M:to_list(UnionSet)), - M:equal(UnionSet, M:from_list(Union)), + UnionSet = M(union, {OrigSet,OtherSet}), + SortedUnion = lists:sort(M(to_list, UnionSet)), + M(equal, {UnionSet,M(from_list, Union)}), UnionSet. is_subset(Config) when is_list(Config) -> test_all([{1,132},{253,270},{299,311}], fun is_subset_1/2). is_subset_1(List, M) -> - ?line S = M:from_list(List), - ?line Empty = M:empty(), + S = M(from_list, List), + Empty = M(empty, []), %% Subset of empty and self. - ?line true = M:is_subset(Empty, Empty), - ?line true = M:is_subset(Empty, S), - ?line false = M:is_subset(S, Empty), - ?line true = M:is_subset(S, S), + true = M(is_subset, {Empty,Empty}), + true = M(is_subset, {Empty,S}), + false = M(is_subset, {S,Empty}), + true = M(is_subset, {S,S}), %% Other cases. - Res = [?line false = M:is_subset(M:singleton(make_ref()), S), - ?line true = M:is_subset(M:singleton(hd(List)), S), - ?line true = check_subset(remove_some(List, 0.1), List, M), - ?line true = check_subset(remove_some(List, 0.5), List, M), - ?line true = check_subset(remove_some(List, 0.9), List, M), - ?line check_subset(mutate_some(List), List, M), - ?line check_subset(rnd_list(length(List) div 2 + 5), List, M), - ?line subtract_check(List, rnd_list(length(List) div 7 + 9), M) + Res = [false = M(is_subset, {M(singleton, make_ref()),S}), + true = M(is_subset, {M(singleton, hd(List)),S}), + true = check_subset(remove_some(List, 0.1), List, M), + true = check_subset(remove_some(List, 0.5), List, M), + true = check_subset(remove_some(List, 0.9), List, M), + check_subset(mutate_some(List), List, M), + check_subset(rnd_list(length(List) div 2 + 5), List, M), + subtract_check(List, rnd_list(length(List) div 7 + 9), M) ], res_to_set(Res, M, 0, []). @@ -304,12 +304,12 @@ check_subset(X, Y, M) -> check_one_subset(X, Y, M). check_one_subset(X, Y, M) -> - XSet = M:from_list(X), - YSet = M:from_list(Y), + XSet = M(from_list, X), + YSet = M(from_list, Y), SortedX = lists:usort(X), SortedY = lists:usort(Y), IsSubSet = length(SortedY--SortedX) =:= length(SortedY) - length(SortedX), - IsSubSet = M:is_subset(XSet, YSet), + IsSubSet = M(is_subset, {XSet,YSet}), IsSubSet. %% Encode all test results as a set to return. @@ -317,54 +317,54 @@ res_to_set([true|T], M, I, Acc) -> res_to_set(T, M, I+1, [I|Acc]); res_to_set([_|T], M, I, Acc) -> res_to_set(T, M, I+1, Acc); -res_to_set([], M, _, Acc) -> M:from_list(Acc). +res_to_set([], M, _, Acc) -> M(from_list, Acc). is_set(Config) when is_list(Config) -> %% is_set/1 is tested in the other test cases when its argument %% is a set. Here test some arguments that makes it return false. - ?line false = gb_sets:is_set([a,b]), - ?line false = gb_sets:is_set({a,very,bad,tuple}), + false = gb_sets:is_set([a,b]), + false = gb_sets:is_set({a,very,bad,tuple}), - ?line false = sets:is_set([a,b]), - ?line false = sets:is_set({a,very,bad,tuple}), + false = sets:is_set([a,b]), + false = sets:is_set({a,very,bad,tuple}), - ?line false = ordsets:is_set([b,a]), - ?line false = ordsets:is_set({bad,tuple}), + false = ordsets:is_set([b,a]), + false = ordsets:is_set({bad,tuple}), %% Now test values that are known to be bad for all set representations. test_all(fun is_set_1/1). is_set_1(M) -> - ?line false = M:is_set(self()), - ?line false = M:is_set(blurf), - ?line false = M:is_set(make_ref()), - ?line false = M:is_set(<<1,2,3>>), - ?line false = M:is_set(42), - ?line false = M:is_set(math:pi()), - ?line false = M:is_set({}), - M:empty(). + false = M(is_set, self()), + false = M(is_set, blurf), + false = M(is_set, make_ref()), + false = M(is_set, <<1,2,3>>), + false = M(is_set, 42), + false = M(is_set, math:pi()), + false = M(is_set, {}), + M(empty, []). fold(Config) when is_list(Config) -> test_all([{0,71},{125,129},{254,259},{510,513},{1023,1025},{9999,10001}], fun fold_1/2). fold_1(List, M) -> - ?line S = M:from_list(List), - ?line L = M:fold(fun(E, A) -> [E|A] end, [], S), - ?line true = lists:sort(L) =:= lists:usort(List), - M:empty(). + S = M(from_list, List), + L = M(fold, {fun(E, A) -> [E|A] end,[],S}), + true = lists:sort(L) =:= lists:usort(List), + M(empty, []). filter(Config) when is_list(Config) -> test_all([{0,69},{126,130},{254,259},{510,513},{1023,1025},{7999,8000}], fun filter_1/2). filter_1(List, M) -> - ?line S = M:from_list(List), + S = M(from_list, List), IsNumber = fun(X) -> is_number(X) end, - ?line M:equal(M:from_list(lists:filter(IsNumber, List)), - M:filter(IsNumber, S)), - ?line M:filter(fun(X) -> is_atom(X) end, S). + M(equal, {M(from_list, lists:filter(IsNumber, List)), + M(filter, {IsNumber,S})}), + M(filter, {fun(X) -> is_atom(X) end,S}). %%% %%% Test specifics for gb_sets. @@ -375,26 +375,26 @@ take_smallest(Config) when is_list(Config) -> fun take_smallest_1/2). take_smallest_1(List, M) -> - case M:module() of + case M(module, []) of gb_sets -> take_smallest_2(List, M); _ -> ok end, - M:empty(). + M(empty, []). take_smallest_2(List0, M) -> - ?line List = lists:usort(List0), - ?line S = M:from_list(List0), + List = lists:usort(List0), + S = M(from_list, List0), take_smallest_3(S, List, M). take_smallest_3(S0, List0, M) -> - case M:is_empty(S0) of + case M(is_empty, S0) of true -> ok; false -> - ?line Smallest = hd(List0), - ?line Smallest = gb_sets:smallest(S0), - ?line {Smallest,S} = gb_sets:take_smallest(S0), - ?line List = tl(List0), - ?line true = gb_sets:to_list(S) =:= List, + Smallest = hd(List0), + Smallest = gb_sets:smallest(S0), + {Smallest,S} = gb_sets:take_smallest(S0), + List = tl(List0), + true = gb_sets:to_list(S) =:= List, take_smallest_3(S, List, M) end. @@ -403,26 +403,26 @@ take_largest(Config) when is_list(Config) -> fun take_largest_1/2). take_largest_1(List, M) -> - case M:module() of + case M(module, []) of gb_sets -> take_largest_2(List, M); _ -> ok end, - M:empty(). + M(empty, []). take_largest_2(List0, M) -> - ?line List = reverse(lists:usort(List0)), - ?line S = M:from_list(List0), + List = reverse(lists:usort(List0)), + S = M(from_list, List0), take_largest_3(S, List, M). take_largest_3(S0, List0, M) -> - case M:is_empty(S0) of + case M(is_empty, S0) of true -> ok; false -> - ?line Largest = hd(List0), - ?line Largest = gb_sets:largest(S0), - ?line {Largest,S} = gb_sets:take_largest(S0), - ?line List = tl(List0), - ?line true = gb_sets:to_list(S) =:= reverse(List), + Largest = hd(List0), + Largest = gb_sets:largest(S0), + {Largest,S} = gb_sets:take_largest(S0), + List = tl(List0), + true = gb_sets:to_list(S) =:= reverse(List), take_largest_3(S, List, M) end. @@ -441,23 +441,23 @@ sets_mods() -> [Ordsets,Sets,Gb]. test_all(Tester) -> - ?line Res = [begin - random:seed(1, 2, 42), - S = Tester(M), - {M:size(S),lists:sort(M:to_list(S))} - end || M <- sets_mods()], - ?line all_same(Res). + Res = [begin + random:seed(1, 2, 42), + S = Tester(M), + {M(size, S),lists:sort(M(to_list, S))} + end || M <- sets_mods()], + all_same(Res). test_all([{Low,High}|T], Tester) -> test_all(lists:seq(Low, High)++T, Tester); test_all([Sz|T], Tester) when is_integer(Sz) -> List = rnd_list(Sz), - ?line Res = [begin + Res = [begin random:seed(19, 2, Sz), S = Tester(List, M), - {M:size(S),lists:sort(M:to_list(S))} + {M(size, S),lists:sort(M(to_list, S))} end || M <- sets_mods()], - ?line all_same(Res), + all_same(Res), test_all(T, Tester); test_all([], _) -> ok. diff --git a/lib/stdlib/test/sets_test_lib.erl b/lib/stdlib/test/sets_test_lib.erl index bdfb0d59d2..fd4ec2bac3 100644 --- a/lib/stdlib/test/sets_test_lib.erl +++ b/lib/stdlib/test/sets_test_lib.erl @@ -17,91 +17,89 @@ %% %CopyrightEnd% %% --module(sets_test_lib, [Mod,Equal]). - --export([module/0,equal/2,empty/0,from_list/1,to_list/1,singleton/1, - add_element/2,del_element/2,size/1,is_empty/1,is_set/1, - intersection/1,intersection/2,subtract/2, - union/1,union/2,is_subset/2,fold/3,filter/2]). - -module() -> - Mod. - -equal(X, Y) -> - Equal(X, Y). - -empty() -> - Mod:new(). - -from_list(L) -> - Mod:from_list(L). - -to_list(S) -> - Mod:to_list(S). +-module(sets_test_lib). + +-export([new/2]). + +new(Mod, Eq) -> + fun (add_element, {El,S}) -> add_element(Mod, El, S); + (del_element, {El,S}) -> del_element(Mod, El, S); + (empty, []) -> Mod:new(); + (equal, {S1,S2}) -> Eq(S1, S2); + (filter, {F,S}) -> filter(Mod, F, S); + (fold, {F,A,S}) -> fold(Mod, F, A, S); + (from_list, L) -> Mod:from_list(L); + (intersection, {S1,S2}) -> intersection(Mod, Eq, S1, S2); + (intersection, Ss) -> intersection(Mod, Eq, Ss); + (is_empty, S) -> is_empty(Mod, S); + (is_set, S) -> Mod:is_set(S); + (is_subset, {S,Set}) -> is_subset(Mod, Eq, S, Set); + (module, []) -> Mod; + (singleton, E) -> singleton(Mod, E); + (size, S) -> Mod:size(S); + (subtract, {S1,S2}) -> subtract(Mod, S1, S2); + (to_list, S) -> Mod:to_list(S); + (union, {S1,S2}) -> union(Mod, Eq, S1, S2); + (union, Ss) -> union(Mod, Eq, Ss) + end. -singleton(E) -> +singleton(Mod, E) -> case erlang:function_exported(Mod, singleton, 1) of true -> Mod:singleton(E); - false -> from_list([E]) + false -> Mod:from_list([E]) end. -add_element(El, S0) -> +add_element(Mod, El, S0) -> S = Mod:add_element(El, S0), true = Mod:is_element(El, S), - false = is_empty(S), + false = is_empty(Mod, S), true = Mod:is_set(S), S. -del_element(El, S0) -> +del_element(Mod, El, S0) -> S = Mod:del_element(El, S0), false = Mod:is_element(El, S), true = Mod:is_set(S), S. -size(S) -> - Mod:size(S). - -is_empty(S) -> +is_empty(Mod, S) -> true = Mod:is_set(S), case erlang:function_exported(Mod, is_empty, 1) of true -> Mod:is_empty(S); false -> Mod:size(S) == 0 end. -is_set(S) -> - Mod:is_set(S). - -intersection(S1, S2) -> +intersection(Mod, Equal, S1, S2) -> S = Mod:intersection(S1, S2), true = Equal(S, Mod:intersection(S2, S1)), - Disjoint = is_empty(S), + Disjoint = is_empty(Mod, S), Disjoint = Mod:is_disjoint(S1, S2), Disjoint = Mod:is_disjoint(S2, S1), S. -intersection(Ss) -> +intersection(Mod, Equal, Ss) -> S = Mod:intersection(Ss), true = Equal(S, Mod:intersection(lists:reverse(Ss))), S. -subtract(S1, S2) -> +subtract(Mod, S1, S2) -> S = Mod:subtract(S1, S2), true = Mod:is_set(S), true = Mod:size(S) =< Mod:size(S1), S. -union(S1, S2) -> +union(Mod, Equal, S1, S2) -> S = Mod:union(S1, S2), true = Equal(S, Mod:union(S2, S1)), true = Mod:is_set(S), S. -union(Ss) -> +union(Mod, Equal, Ss) -> S = Mod:union(Ss), true = Equal(S, Mod:union(lists:reverse(Ss))), S. -is_subset(S, Set) -> +is_subset(Mod, Equal, S, Set) -> case Mod:is_subset(S, Set) of false -> false; true -> @@ -115,10 +113,10 @@ is_subset(S, Set) -> true end. -fold(F, A, S) -> +fold(Mod, F, A, S) -> true = Mod:is_set(S), Mod:fold(F, A, S). -filter(F, S) -> +filter(Mod, F, S) -> true = Mod:is_set(S), Mod:filter(F, S). diff --git a/lib/stdlib/test/stdlib.cover b/lib/stdlib/test/stdlib.cover index 61f4f064b9..e71be880cb 100644 --- a/lib/stdlib/test/stdlib.cover +++ b/lib/stdlib/test/stdlib.cover @@ -1,17 +1,2 @@ %% -*- erlang -*- {incl_app,stdlib,details}. - -{excl_mods,stdlib, - [erl_parse, - erl_eval, - ets, - filename, - gen_event, - gen_server, - gen, - lists, - io, - io_lib, - io_lib_format, - io_lib_pretty, - proc_lib]}. diff --git a/lib/test_server/doc/src/notes.xml b/lib/test_server/doc/src/notes.xml index 3b109193a0..6a9add044a 100644 --- a/lib/test_server/doc/src/notes.xml +++ b/lib/test_server/doc/src/notes.xml @@ -32,6 +32,47 @@ <file>notes.xml</file> </header> +<section><title>Test_Server 3.5.3</title> + + <section><title>Improvements and New Features</title> + <list> + <item> + <p> + test_server_h will now recognize info_reports written by + ct connection handlers (according to the description in + cth_conn_log) and ignore them as they will be completely + handled by by ct_conn_log_h.</p> + <p> + Earlier test_server_h would print a tag (testcase name) + before forwarding the report to error_logger_tty_h. This + would cause lots of tags in the log with no info report + following (since error_logger_tty_h did not handle them).</p> + <p> + Own Id: OTP-10571</p> + </item> + </list> + </section> + + + <section><title>Known Bugs and Problems</title> + <list> + <item> + <p> + Restore Config data if lost when test case fails.</p> + <p> + Own Id: OTP-10070 Aux Id: kunagi-175 [86] </p> + </item> + <item> + <p> + IO server error in test_server.</p> + <p> + Own Id: OTP-10125 Aux Id: OTP-10101, kunagi-177 [88] </p> + </item> + </list> + </section> + +</section> + <section><title>Test_Server 3.5.2</title> <section><title>Fixed Bugs and Malfunctions</title> diff --git a/lib/test_server/doc/src/test_server.xml b/lib/test_server/doc/src/test_server.xml index 5bfa42c36f..841cbfbe91 100644 --- a/lib/test_server/doc/src/test_server.xml +++ b/lib/test_server/doc/src/test_server.xml @@ -5,7 +5,7 @@ <header> <copyright> <year>2007</year> - <year>2011</year> + <year>2012</year> <holder>Ericsson AB, All Rights Reserved</holder> </copyright> <legalnotice> @@ -529,6 +529,18 @@ Only valid for peer nodes. Note that slave nodes always analogy with <c>os:getenv/1</c>), which removes the environment variable. Only valid for peer nodes. Not available on VxWorks.</item> + <tag><c>{start_cover, false}</c></tag> + <item>By default the test server will start cover on all nodes + when the test is run with code coverage analysis. To make + sure cover is not started on a new node, set this option to + <c>false</c>. This can be necessary if the connection to + the node at some point will be broken but the node is + expected to stay alive. The reason is that a remote cover + node can not continue to run without its main node. Another + solution would be to explicitly stop cover on the node + before breaking the connection, but in some situations (if + old code resides in one or more processes) this is not + possible.</item> </taglist> </desc> </func> diff --git a/lib/test_server/src/erl2html2.erl b/lib/test_server/src/erl2html2.erl index 6891e87e48..9c459c05d4 100644 --- a/lib/test_server/src/erl2html2.erl +++ b/lib/test_server/src/erl2html2.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 1997-2011. All Rights Reserved. +%% Copyright Ericsson AB 1997-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -18,19 +18,9 @@ %% %%%------------------------------------------------------------------ -%%% Purpose:Convert Erlang files to html. (Pretty faaast... :-) +%%% Purpose:Convert Erlang files to html. %%%------------------------------------------------------------------ -%-------------------------------------------------------------------- -% Some stats (Sparc5@110Mhz): -% 4109 lines (erl_parse.erl): 3.00 secs -% 1847 lines (application_controller.erl): 0.57 secs -% 3160 lines (test_server.erl): 1.00 secs -% 1199 lines (ts_estone.erl): 0.35 secs -% -% Avg: ~4.5e-4s/line, or ~0.45s/1000 lines, or ~2200 lines/sec. -%-------------------------------------------------------------------- - -module(erl2html2). -export([convert/2, convert/3]). @@ -52,134 +42,141 @@ convert(File, Dest) -> "<body bgcolor=\"white\" text=\"black\"" " link=\"blue\" vlink=\"purple\" alink=\"red\">\n"], convert(File, Dest, Header). - + + convert(File, Dest, Header) -> - case file:read_file(File) of - {ok, Bin} -> - Code=binary_to_list(Bin), - statistics(runtime), - {Html1, Lines} = root(Code, [], 1), - Html = [Header, - "<pre>\n", Html1, "</pre>\n", - footer(Lines),"</body>\n</html>\n"], - file:write_file(Dest, Html); - {error, Reason} -> - {error, Reason} + %% statistics(runtime), + case parse_file(File) of + {ok,Functions} -> + %% {_, Time1} = statistics(runtime), + %% io:format("Parsed file in ~.2f Seconds.~n",[Time1/1000]), + case file:open(File,[raw,{read_ahead,10000}]) of + {ok,SFd} -> + case file:open(Dest,[write,raw]) of + {ok,DFd} -> + file:write(DFd,[Header,"<pre>\n"]), + Lines = build_html(SFd,DFd,Functions), + file:write(DFd,["</pre>\n",footer(), + "</body>\n</html>\n"]), + %% {_, Time2} = statistics(runtime), + %% io:format("Converted ~p lines in ~.2f Seconds.~n", + %% [Lines, Time2/1000]), + file:close(SFd), + file:close(DFd), + ok; + Error -> + Error + end; + Error -> + Error + end; + Error -> + Error end. -root([], Res, Line) -> - {Res, Line}; -root([Char0|Code], Res, Line0) -> - Char = [Char0], - case Char of - "-" -> - {Match, Line1, NewCode0, AttName} = - read_to_char(Line0+1, Code, [], [$(, $.]), - {_, Line2, NewCode, Stuff} = read_to_char(Line1, NewCode0, [], $\n), - NewRes = [Res,linenum(Line0),"-<b>",AttName, - "</b>",Match, Stuff, "\n"], - root(NewCode, NewRes, Line2); - "%" -> - {_, Line, NewCode, Stuff} = read_to_char(Line0+1, Code, [], $\n), - NewRes = [Res,linenum(Line0),"<i>%",Stuff,"</i>\n"], - root(NewCode, NewRes, Line); - "\n" -> - root(Code, [Res,linenum(Line0), "\n"], Line0+1); - " " -> - {_, Line, NewCode, Stuff} = read_to_char(Line0+1, Code, [], $\n), - root(NewCode, [Res,linenum(Line0)," ",Stuff, "\n"], - Line); - "\t" -> - {_, Line, NewCode, Stuff} = read_to_char(Line0+1, Code, [], $\n), - root(NewCode, [Res,linenum(Line0),"\t",Stuff, "\n"], - Line); - [Chr|_] when Chr>96, Chr<123 -> - %% Assumed to be function/clause start. - %% FIXME: This will trivially generate non-unique anchors - %% (one for each clause) --- which is illegal HTML. - {_, Line1, NewCode0, FName0} = read_to_char(Line0+1, Code, [], $(), - {_, Line2, NewCode, Stuff} = - read_to_char(Line1,NewCode0, [], $\n), - FuncName = [[Chr],FName0], - NewRes=[Res,"<a name=",FuncName,">", - linenum(Line0),"<b>",FuncName,"</b></a>", - "(",Stuff, "\n"], - root(NewCode, NewRes, Line2); - Chr -> - {_, Line, NewCode, Stuff} = read_to_char(Line0+1, Code, [], $\n), - root(NewCode, [Res,linenum(Line0),Chr,Stuff, "\n"], - Line) +%%%----------------------------------------------------------------- +%%% Parse the input file to get the line numbers for all function +%%% definitions. This will be used when creating link targets for each +%%% function in build_html/5. +%%% +%%% All function clauses are also marked in order to allow +%%% possibly_enhance/2 to write these in bold. +parse_file(File) -> + case epp:open(File, [], []) of + {ok,Epp} -> + Forms = parse_file(Epp,File,false), + epp:close(Epp), + {ok,Forms}; + {error,E} -> + {error,E} end. -read_to_char(Line0, [], Res, _Chr) -> - {nomatch, Line0, [], Res}; -read_to_char(Line0, [Char|Code], Res, Chr) -> - case Char of - Chr -> {Char, Line0, Code, Res}; - _ when is_list(Chr) -> - case lists:member(Char,Chr) of - true -> - {Char, Line0, Code, Res}; - false -> - {Line,NewCode,NewRes} = maybe_convert(Line0,Code,Res,Char), - read_to_char(Line, NewCode, NewRes, Chr) + +parse_file(Epp,File,InCorrectFile) -> + case epp:parse_erl_form(Epp) of + {ok,Form} -> + case Form of + {attribute,_,file,{File,_}} -> + parse_file(Epp,File,true); + {attribute,_,file,{_OtherFile,_}} -> + parse_file(Epp,File,false); + {function,L,F,A,[_|C]} when InCorrectFile -> + Clauses = [{clause,CL} || {clause,CL,_,_,_} <- C], + [{atom_to_list(F),A,L} | Clauses] ++ + parse_file(Epp,File,true); + _ -> + parse_file(Epp,File,InCorrectFile) end; - _ -> - {Line,NewCode,NewRes} = maybe_convert(Line0,Code,Res,Char), - read_to_char(Line,NewCode, NewRes, Chr) + {error,_E} -> + parse_file(Epp,File,InCorrectFile); + {eof,_Location} -> + [] end. -maybe_convert(Line0,Code,Res,Chr) -> - case Chr of - %% Quoted stuff should not have the highlighting like normal code - %% FIXME: unbalanced quotes (e.g. in comments) will cause trouble with - %% highlighting and line numbering in the rest of the module. - $" -> - {_, Line1, NewCode, Stuff0} = read_to_char(Line0, Code, [], $"), - {Line2,Stuff} = add_linenumbers(Line1,lists:flatten(Stuff0),[]), - {Line2,NewCode,[Res,$",Stuff,$"]}; - %% These chars have meaning in HTML, and *must* *not* be - %% written as themselves. - $& -> - {Line0, Code, [Res,"&"]}; - $< -> - {Line0, Code, [Res,"<"]}; - $> -> - {Line0, Code, [Res,">"]}; - %% Everything else is simply copied. - OtherChr -> - {Line0, Code, [Res,OtherChr]} - end. +%%%----------------------------------------------------------------- +%%% Add a link target for each line and one for each function definition. +build_html(SFd,DFd,Functions) -> + build_html(SFd,DFd,file:read_line(SFd),1,Functions,false). -add_linenumbers(Line,[Chr|Chrs],Res) -> - case Chr of - $\n -> add_linenumbers(Line+1,Chrs,[Res,$\n,linenum(Line)]); - _ -> add_linenumbers(Line,Chrs,[Res,Chr]) - end; -add_linenumbers(Line,[],Res) -> - {Line,Res}. +build_html(SFd,DFd,{ok,Str},L,[{F,A,L}|Functions],_IsFuncDef) -> + FALink = http_uri:encode(F++"-"++integer_to_list(A)), + file:write(DFd,["<a name=\"",FALink,"\"/>"]), + build_html(SFd,DFd,{ok,Str},L,Functions,true); +build_html(SFd,DFd,{ok,Str},L,[{clause,L}|Functions],_IsFuncDef) -> + build_html(SFd,DFd,{ok,Str},L,Functions,true); +build_html(SFd,DFd,{ok,Str},L,Functions,IsFuncDef) -> + LStr = line_number(L), + Str1 = line(Str,IsFuncDef), + file:write(DFd,[LStr,Str1]), + build_html(SFd,DFd,file:read_line(SFd),L+1,Functions,false); +build_html(_SFd,_DFd,eof,L,_Functions,_IsFuncDef) -> + L. -%% Make nicely indented line numbers. -linenum(Line) -> - Num = integer_to_list(Line), - A = case Line rem 10 of - 0 -> "<a name=\"" ++ Num ++"\"></a>"; - _ -> [] - end, +line_number(L) -> + LStr = integer_to_list(L), Pred = - case length(Num) of + case length(LStr) of Length when Length < 5 -> lists:duplicate(5-Length,$\s); _ -> [] end, - [A,Pred,integer_to_list(Line),":"]. + ["<a name=\"",LStr,"\"/>",Pred,LStr,": "]. + +line(Str,IsFuncDef) -> + Str1 = htmlize(Str), + possibly_enhance(Str1,IsFuncDef). + +%%%----------------------------------------------------------------- +%%% Substitute special characters that should not appear in HTML +htmlize([$<|Str]) -> + [$&,$l,$t,$;|htmlize(Str)]; +htmlize([$>|Str]) -> + [$&,$g,$t,$;|htmlize(Str)]; +htmlize([$&|Str]) -> + [$&,$a,$m,$p,$;|htmlize(Str)]; +htmlize([$"|Str]) -> + [$&,$q,$u,$o,$t,$;|htmlize(Str)]; +htmlize([Ch|Str]) -> + [Ch|htmlize(Str)]; +htmlize([]) -> + []. + +%%%----------------------------------------------------------------- +%%% Write comments in italic and function definitions in bold. +possibly_enhance(Str,true) -> + case lists:splitwith(fun($() -> false; (_) -> true end, Str) of + {_,[]} -> Str; + {F,A} -> ["<b>",F,"</b>",A] + end; +possibly_enhance([$%|_]=Str,_) -> + ["<i>",Str--"\n","</i>","\n"]; +possibly_enhance([$-|_]=Str,_) -> + possibly_enhance(Str,true); +possibly_enhance(Str,false) -> + Str. -footer(_Lines) -> +%%%----------------------------------------------------------------- +%%% End of the file +footer() -> "". -%% {_, Time} = statistics(runtime), -%% io:format("Converted ~p lines in ~.2f Seconds.~n", -%% [Lines, Time/1000]), -%% S = "<i>The transformation of this file (~p lines) took ~.2f seconds</i>", -%% F = lists:flatten(io_lib:format(S, [Lines, Time/1000])), -%% ["<hr size=1>",F,"<br>\n"]. diff --git a/lib/test_server/src/test_server.erl b/lib/test_server/src/test_server.erl index 57834120f7..14cdfd391a 100644 --- a/lib/test_server/src/test_server.erl +++ b/lib/test_server/src/test_server.erl @@ -20,15 +20,12 @@ -define(DEFAULT_TIMETRAP_SECS, 60). -%%% START %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% --export([start/1,start/2]). - %%% TEST_SERVER_CTRL INTERFACE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -export([run_test_case_apply/1,init_target_info/0,init_purify/0]). --export([cover_compile/1,cover_analyse/2]). +-export([cover_compile/1,cover_analyse/3]). %%% TEST_SERVER_SUP INTERFACE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% --export([get_loc/1,set_tc_state/2]). +-export([get_loc/1,set_tc_state/1]). %%% TEST SUITE INTERFACE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -export([lookup_config/2]). @@ -60,49 +57,11 @@ -export([]). %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% --record(state,{controller,jobs=[]}). - -include("test_server_internal.hrl"). -include_lib("kernel/include/file.hrl"). -define(pl2a(M), test_server_sup:package_atom(M)). -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% -%% **** START *** CODE FOR REMOTE TARGET ONLY *** -%% -%% test_server -%% This process is started only if the test is to be run on a remote target -%% The process is then started on target -%% A socket connection is established with the test_server_ctrl process -%% on host, and information about target is sent to host. -start([ControllerHost]) when is_atom(ControllerHost) -> - start(atom_to_list(ControllerHost)); -start(ControllerHost) when is_list(ControllerHost) -> - start(ControllerHost,?MAIN_PORT). -start(ControllerHost,ControllerPort) -> - S = self(), - Pid = spawn(fun() -> init(ControllerHost,ControllerPort,S) end), - receive {Pid,started} -> {ok,Pid}; - {Pid,Error} -> Error - end. - -init(Host,Port,Starter) -> - global:register_name(?MODULE,self()), - process_flag(trap_exit,true), - test_server_sup:cleanup_crash_dumps(), - case gen_tcp:connect(Host,Port, [binary, - {reuseaddr,true}, - {packet,2}]) of - {ok,MainSock} -> - Starter ! {self(),started}, - request(MainSock,{target_info,init_target_info()}), - loop(#state{controller={Host,MainSock}}); - Error -> - Starter ! {self(),{error, - {could_not_contact_controller,Error}}} - end. - init_target_info() -> [$.|Emu] = code:objfile_extension(), {_, OTPRel} = init:script_id(), @@ -118,171 +77,10 @@ init_target_info() -> username=test_server_sup:get_username(), cookie=atom_to_list(erlang:get_cookie())}. - -loop(#state{controller={_,MainSock}} = State) -> - receive - {tcp, MainSock, <<1,Request/binary>>} -> - State1 = decode_main(binary_to_term(Request),State), - loop(State1); - {tcp_closed, MainSock} -> - gen_tcp:close(MainSock), - halt(); - {'EXIT',Pid,Reason} -> - case lists:keysearch(Pid,1,State#state.jobs) of - {value,{Pid,Name}} -> - case Reason of - normal -> ignore; - _other -> request(MainSock,{job_proc_killed,Name,Reason}) - end, - NewJobs = lists:keydelete(Pid,1,State#state.jobs), - loop(State#state{jobs = NewJobs}); - false -> - loop(State) - end - end. - -%% Decode request on main socket -decode_main({job,Port,Name},#state{controller={Host,_},jobs=Jobs}=State) -> - S = self(), - NewJob = spawn_link(fun() -> job(Host,Port,S) end), - receive {NewJob,started} -> State#state{jobs=[{NewJob,Name}|Jobs]}; - {NewJob,_Error} -> State - end. - init_purify() -> purify_new_leaks(). -%% Temporary job process on target -%% This process will live while all test cases in the job are executed. -%% A socket connection is established with the job process on host. -job(Host,Port,Starter) -> - process_flag(trap_exit,true), - init_purify(), - case gen_tcp:connect(Host,Port, [binary, - {reuseaddr,true}, - {packet,4}, - {active,false}]) of - {ok,JobSock} -> - Starter ! {self(),started}, - job(JobSock); - Error -> - Starter ! {self(),{error, - {could_not_contact_controller,Error}}} - end. - -job(JobSock) -> - JobDir = get_jobdir(), - ok = file:make_dir(JobDir), - ok = file:make_dir(filename:join(JobDir,?priv_dir)), - put(test_server_job_sock,JobSock), - put(test_server_job_dir,JobDir), - {ok,Cwd} = file:get_cwd(), - job_loop(JobSock), - ok = file:set_cwd(Cwd), - send_privdir(JobDir,JobSock), % also recursively removes jobdir - ok. - - -get_jobdir() -> - Now = now(), - {{Y,M,D},{H,Mi,S}} = calendar:now_to_local_time(Now), - Basename = io_lib:format("~w-~2.2.0w-~2.2.0w_~2.2.0w.~2.2.0w.~2.2.0w_~w", - [Y,M,D,H,Mi,S,element(3,Now)]), - %% if target has a file master, don't use prim_file to look up cwd - case lists:keymember(master,1,init:get_arguments()) of - true -> - {ok,Cwd} = file:get_cwd(), - Cwd ++ "/" ++ Basename; - false -> - filename:absname(Basename) - end. - -send_privdir(JobDir,JobSock) -> - LocalPrivDir = filename:join(JobDir,?priv_dir), - case file:list_dir(LocalPrivDir) of - {ok,List} when List/=[] -> - Tarfile0 = ?priv_dir ++ ".tar.gz", - Tarfile = filename:join(JobDir,Tarfile0), - {ok,Tar} = erl_tar:open(Tarfile,[write,compressed,cooked]), - ok = erl_tar:add(Tar,LocalPrivDir,?priv_dir,[]), - ok = erl_tar:close(Tar), - {ok,TarBin} = file:read_file(Tarfile), - file:delete(Tarfile), - ok = del_dir(JobDir), - request(JobSock,{{privdir,Tarfile0},TarBin}); - _ -> - ok = del_dir(JobDir), - request(JobSock,{privdir,empty_priv_dir}) - end. - -del_dir(Dir) -> - case file:read_file_info(Dir) of - {ok,#file_info{type=directory}} -> - {ok,Cont} = file:list_dir(Dir), - lists:foreach(fun(F) -> del_dir(filename:join(Dir,F)) end, Cont), - ok = file:del_dir(Dir); - {ok,#file_info{}} -> - ok = file:delete(Dir); - _r -> - %% This might be a symlink - let's try to delete it! - catch file:delete(Dir), - ok - end. - -%% -%% Receive and decode request on job socket -%% -job_loop(JobSock) -> - Request = recv(JobSock), - case decode_job(Request) of - ok -> job_loop(JobSock); - {stop,R} -> R - end. - -decode_job({{beam,Mod,Which},Beam}) -> - % FIXME, shared directory structure on host and target required, - % "Library beams" are not loaded from HOST... /Patrik - code:add_patha(filename:dirname(Which)), - % End of Patriks uglyness... - {module,Mod} = code:load_binary(Mod,Which,Beam), - ok; -decode_job({{datadir,Tarfile0},Archive}) -> - JobDir = get(test_server_job_dir), - Tarfile = filename:join(JobDir,Tarfile0), - ok = file:write_file(Tarfile,Archive), - % Cooked is temporary removed/broken - % ok = erl_tar:extract(Tarfile,[compressed,{cwd,JobDir},cooked]), - ok = erl_tar:extract(Tarfile,[compressed,{cwd,JobDir}]), - ok = file:delete(Tarfile), - ok; -decode_job({test_case,Case}) -> - Result = run_test_case_apply(Case), - JobSock = get(test_server_job_sock), - request(JobSock,{test_case_result,Result}), - case test_server_sup:tar_crash_dumps() of - {error,no_crash_dumps} -> request(JobSock,{crash_dumps,no_crash_dumps}); - {ok,TarFile} -> - {ok,TarBin} = file:read_file(TarFile), - file:delete(TarFile), - request(JobSock,{{crash_dumps,filename:basename(TarFile)},TarBin}) - end, - ok; -decode_job({sync_apply,{M,F,A}}) -> - R = apply(M,F,A), - request(get(test_server_job_sock),{sync_result,R}), - ok; -decode_job(job_done) -> - {stop,stopped}. - -%% -%% **** STOP *** CODE FOR REMOTE TARGET ONLY *** -%% -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - - - - %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% cover_compile({App,Include,Exclude,Cross}) -> %% {ok,AnalyseModules} | {error,Reason} @@ -377,9 +175,7 @@ module_names(Beams) -> do_cover_compile(Modules) -> do_cover_compile1(lists:usort(Modules)). % remove duplicates -do_cover_compile1([Dont|Rest]) when Dont=:=cover; - Dont=:=test_server; - Dont=:=test_server_ctrl -> +do_cover_compile1([Dont|Rest]) when Dont=:=cover -> do_cover_compile1(Rest); do_cover_compile1([M|Rest]) -> case {code:is_sticky(M),code:is_loaded(M)} of @@ -416,7 +212,7 @@ do_cover_compile1([]) -> ok. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% cover_analyse(Analyse,Modules) -> [{M,{Cov,NotCov,Details}}] +%% cover_analyse(Analyse,Modules,Stop) -> [{M,{Cov,NotCov,Details}}] %% %% Analyse = {details,Dir} | details | {overview,void()} | overview %% Modules = [atom()], the modules to analyse @@ -432,8 +228,19 @@ do_cover_compile1([]) -> %% %% Also, if a Dir exists, cover data will be exported to a file called %% all.coverdata in that directory. -cover_analyse(Analyse,Modules) -> - io:fwrite("Cover analysing...\n",[]), +%% +%% Finally, if Stop==true, then cover will be stopped after the +%% analysis is completed. Stopping cover causes the original (non +%% cover compiled) modules to be loaded back in. If a process at this +%% point is still running old code of any of the cover compiled +%% modules, meaning that is has not done any fully qualified function +%% call after the cover compilation, the process will now be +%% killed. To avoid this scenario, it is possible to set Stop=false, +%% which means that the modules will stay cover compiled. Note that +%% this is only recommended if the erlang node is being terminated +%% after the test is completed. +cover_analyse(Analyse,Modules,Stop) -> + print(stdout, "Cover analysing...\n", []), DetailsFun = case Analyse of {details,Dir} -> @@ -483,9 +290,15 @@ cover_analyse(Analyse,Modules) -> {M,Err} end end, Modules), - Sticky = unstick_all_sticky(node()), - cover:stop(), - stick_all_sticky(node(),Sticky), + + case Stop of + true -> + Sticky = unstick_all_sticky(node()), + cover:stop(), + stick_all_sticky(node(),Sticky); + false -> + ok + end, R. pmap(Fun,List) -> @@ -502,7 +315,20 @@ pmap(Fun,List) -> end end, Pids). + +do_cover_for_node(Node,CoverFunc) -> + %% In case a slave node is starting another slave node! I.e. this + %% function is executed on a slave node - then the cover function + %% must be executed on the master node. This is for instance the + %% case in test_server's own tests. + MainCoverNode = cover:get_main_node(), + Sticky = unstick_all_sticky(MainCoverNode,Node), + rpc:call(MainCoverNode,cover,CoverFunc,[Node]), + stick_all_sticky(Node,Sticky). + unstick_all_sticky(Node) -> + unstick_all_sticky(node(),Node). +unstick_all_sticky(MainCoverNode,Node) -> lists:filter( fun(M) -> case code:is_sticky(M) of @@ -513,7 +339,7 @@ unstick_all_sticky(Node) -> false end end, - cover:modules()). + rpc:call(MainCoverNode,cover,modules,[])). stick_all_sticky(Node,Sticky) -> lists:foreach( @@ -578,33 +404,6 @@ run_test_case_apply({CaseNum,Mod,Func,Args,Name, DetFail = get(test_server_detected_fail), {Result,DetFail,ProcBef,ProcAft}. -run_test_case_apply(Mod, Func, Args, Name, RunInit, TimetrapData) -> - case get(test_server_job_dir) of - undefined -> - %% i'm a local target - do_run_test_case_apply(Mod, Func, Args, Name, RunInit, - TimetrapData); - JobDir -> - %% i'm a remote target - case Args of - [Config] when is_list(Config) -> - {value,{data_dir,HostDataDir}} = - lists:keysearch(data_dir, 1, Config), - DataBase = filename:basename(HostDataDir), - TargetDataDir = filename:join(JobDir, DataBase), - Config1 = lists:keyreplace(data_dir, 1, Config, - {data_dir,TargetDataDir}), - TargetPrivDir = filename:join(JobDir, ?priv_dir), - Config2 = lists:keyreplace(priv_dir, 1, Config1, - {priv_dir,TargetPrivDir}), - do_run_test_case_apply(Mod, Func, [Config2], Name, RunInit, - TimetrapData); - _other -> - do_run_test_case_apply(Mod, Func, Args, Name, RunInit, - TimetrapData) - end - end. - -type tc_status() :: 'starting' | 'running' | 'init_per_testcase' | 'end_per_testcase' | {'framework',atom(),atom()} | 'tc'. @@ -621,7 +420,7 @@ run_test_case_apply(Mod, Func, Args, Name, RunInit, TimetrapData) -> end_conf_pid :: pid() | 'undefined' }). -do_run_test_case_apply(Mod, Func, Args, Name, RunInit, TimetrapData) -> +run_test_case_apply(Mod, Func, Args, Name, RunInit, TimetrapData) -> {ok,Cwd} = file:get_cwd(), Args2Print = case Args of [Args1] when is_list(Args1) -> @@ -645,7 +444,7 @@ do_run_test_case_apply(Mod, Func, Args, Name, RunInit, TimetrapData) -> end), put(test_server_detected_fail, []), St = #st{ref=Ref,pid=Pid,mf={Mod,Func},status=starting,ret_val=[], - comment="",timeout=infinity,config=undefined}, + comment="",timeout=infinity,config=hd(Args)}, run_test_case_msgloop(St). %% Ugly bug (pre R5A): @@ -659,7 +458,11 @@ do_run_test_case_apply(Mod, Func, Args, Name, RunInit, TimetrapData) -> %% run_test_case_msgloop(#st{ref=Ref,pid=Pid,end_conf_pid=EndConfPid0}=St0) -> receive - {set_tc_state=Tag,From,{Status,Config}} -> + {set_tc_state=Tag,From,{Status,Config0}} -> + Config = case Config0 of + unknown -> St0#st.config; + _ -> Config0 + end, St = St0#st{status=Status,config=Config}, From ! {self(),Tag,ok}, run_test_case_msgloop(St); @@ -844,6 +647,8 @@ setup_termination(RetVal, #st{pid=Pid}=St) -> timetrap_cancel_all(Pid, false), St#st{ret_val=RetVal,timeout=20}. +set_tc_state(State) -> + set_tc_state(State,unknown). set_tc_state(State, Config) -> tc_supervisor_req(set_tc_state, {State,Config}). @@ -919,9 +724,11 @@ call_end_conf(Mod,Func,TCPid,TCExitReason,Loc,Conf,TVal) -> Data = {Mod,Func,TCPid,TCExitReason,Loc}, EndConfProc = fun() -> + process_flag(trap_exit,true), % to catch timetraps Supervisor = self(), EndConfApply = fun() -> + timetrap(TVal), case catch apply(Mod,end_per_testcase,[Func,Conf]) of {'EXIT',Why} -> timer:sleep(1), @@ -940,26 +747,26 @@ call_end_conf(Mod,Func,TCPid,TCExitReason,Loc,Conf,TVal) -> {Pid,end_conf} -> Starter ! {self(),{call_end_conf,Data,ok}}; {'EXIT',Pid,Reason} -> - Starter ! {self(),{call_end_conf,Data,{error,Reason}}} - after TVal -> - exit(Pid, kill), group_leader() ! {printout,12, "WARNING! ~p:end_per_testcase(~p, ~p)" - " failed!\n\tReason: timetrap timeout" - " after ~w ms!\n", [Mod,Func,Conf,TVal]}, - Starter ! {self(),{call_end_conf,Data,{error,timeout}}} + " failed!\n\tReason: ~p\n", + [Mod,Func,Conf,Reason]}, + Starter ! {self(),{call_end_conf,Data,{error,Reason}}}; + {'EXIT',_OtherPid,Reason} -> + %% Probably the parent - not much to do about that + exit(Reason) end end, spawn_link(EndConfProc). -spawn_fw_call(Mod,{init_per_testcase,Func},_,Pid,{timetrap_timeout,TVal}=Why, +spawn_fw_call(Mod,{init_per_testcase,Func},CurrConf,Pid,{timetrap_timeout,TVal}=Why, Loc,SendTo) -> FwCall = fun() -> Skip = {skip,{failed,{Mod,init_per_testcase,Why}}}, %% if init_per_testcase fails, the test case %% should be skipped - case catch do_end_tc_call(Mod,Func, {Pid,Skip,[[]]}, Why) of + case catch do_end_tc_call(Mod,Func, {Pid,Skip,[CurrConf]}, Why) of {'EXIT',FwEndTCErr} -> exit({fw_notify_done,end_tc,FwEndTCErr}); _ -> @@ -1025,7 +832,7 @@ spawn_fw_call(FwMod,FwFunc,_,_Pid,{framework_error,FwError},_,SendTo) -> end, spawn_link(FwCall); -spawn_fw_call(Mod,Func,_CurrConf,Pid,Error,Loc,SendTo) -> +spawn_fw_call(Mod,Func,CurrConf,Pid,Error,Loc,SendTo) -> FwCall = fun() -> case catch fw_error_notify(Mod,Func,[], @@ -1036,7 +843,7 @@ spawn_fw_call(Mod,Func,_CurrConf,Pid,Error,Loc,SendTo) -> _ -> ok end, - Conf = [{tc_status,{failed,timetrap_timeout}}], + Conf = [{tc_status,{failed,timetrap_timeout}}|CurrConf], case catch do_end_tc_call(Mod,Func, {Pid,Error,[Conf]},Error) of {'EXIT',FwEndTCErr} -> @@ -1106,7 +913,7 @@ run_test_case_eval(Mod, Func, Args0, Name, Ref, RunInit, put(test_server_loc, Where), FWInitResult = test_server_sup:framework_call(init_tc,[?pl2a(Mod),Func,Args0], {ok,Args0}), - set_tc_state(running, undefined), + set_tc_state(running), {{Time,Value},Loc,Opts} = case FWInitResult of {ok,Args} -> @@ -1139,12 +946,12 @@ run_test_case_eval1(Mod, Func, Args, Name, RunInit, TCCallback) -> case init_per_testcase(Mod, Func, Args) of Skip = {skip,Reason} -> Line = get_loc(), - Conf = [{tc_status,{skipped,Reason}}], + Conf = [{tc_status,{skipped,Reason}}|hd(Args)], NewRes = do_end_tc_call(Mod,Func, {Skip,[Conf]}, Skip), {{0,NewRes},Line,[]}; {skip_and_save,Reason,SaveCfg} -> Line = get_loc(), - Conf = [{tc_status,{skipped,Reason}},{save_config,SaveCfg}], + Conf = [{tc_status,{skipped,Reason}},{save_config,SaveCfg}|hd(Args)], NewRes = do_end_tc_call(Mod,Func, {{skip,Reason},[Conf]}, {skip,Reason}), {{0,NewRes},Line,[]}; @@ -1506,10 +1313,10 @@ fw_error_notify(Mod, Func, Args, Error, Loc) -> %% is directed to console, major and/or minor log files. print(Detail,Format,Args) -> - local_or_remote_apply({test_server_ctrl,print,[Detail,Format,Args]}). + test_server_ctrl:print(Detail, Format, Args). print(Detail,Format,Args,Printer) -> - local_or_remote_apply({test_server_ctrl,print,[Detail,Format,Args,Printer]}). + test_server_ctrl:print(Detail, Format, Args, Printer). %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% print_timsteamp(Detail,Leader) -> ok @@ -1519,7 +1326,7 @@ print(Detail,Format,Args,Printer) -> %% log files. print_timestamp(Detail,Leader) -> - local_or_remote_apply({test_server_ctrl,print_timestamp,[Detail,Leader]}). + test_server_ctrl:print_timestamp(Detail, Leader). %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% @@ -2381,7 +2188,10 @@ start_node(Name, Type, Options) -> %% by a shielded node. Cover = case is_cover() of true -> - not is_shielded(Name) andalso same_version(Node); + not is_shielded(Name) + andalso same_version(Node) + andalso proplists:get_value(start_cover,Options, + true); false -> false end, @@ -2389,9 +2199,7 @@ start_node(Name, Type, Options) -> net_adm:ping(Node), case Cover of true -> - Sticky = unstick_all_sticky(Node), - cover:start(Node), - stick_all_sticky(Node,Sticky); + do_cover_for_node(Node,start); _ -> ok end, @@ -2419,7 +2227,27 @@ wait_for_node(Slave) -> group_leader() ! {sync_apply, self(), {test_server_ctrl,wait_for_node,[Slave]}}, - receive {sync_result,R} -> R end. + Result = receive {sync_result,R} -> R end, + case Result of + ok -> + Cover = case is_cover() of + true -> + not is_shielded(Slave) andalso same_version(Slave); + false -> + false + end, + + net_adm:ping(Slave), + case Cover of + true -> + do_cover_for_node(Slave,start); + _ -> + ok + end; + _ -> + ok + end, + Result. %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% @@ -2431,9 +2259,7 @@ stop_node(Slave) -> Nocover = is_shielded(Slave) orelse not same_version(Slave), case is_cover() of true when not Nocover -> - Sticky = unstick_all_sticky(Slave), - cover:stop(Slave), - stick_all_sticky(Slave,Sticky); + do_cover_for_node(Slave,flush); _ -> ok end, @@ -2630,7 +2456,7 @@ make_priv_dir() -> %% Returns the OsType of the target node. OsType is %% the same as returned from os:type() os_type() -> - test_server_ctrl:get_target_os_type(). + os:type(). %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% @@ -2749,47 +2575,9 @@ purify_format(Format, Args) -> %% %% Generic send functions for communication with host %% -sync_local_or_remote_apply(Proxy,From,{M,F,A} = MFA) -> - case get(test_server_job_sock) of - undefined -> - %% i'm a local target - Result = apply(M,F,A), - if is_pid(Proxy) -> Proxy ! {sync_result_proxy,From,Result}; - true -> From ! {sync_result,Result} - end; - JobSock -> - %% i'm a remote target - request(JobSock,{sync_apply,MFA}), - {sync_result,Result} = recv(JobSock), - if is_pid(Proxy) -> Proxy ! {sync_result_proxy,From,Result}; - true -> From ! {sync_result,Result} - end - end. -local_or_remote_apply({M,F,A} = MFA) -> - case get(test_server_job_sock) of - undefined -> - %% i'm a local target - apply(M,F,A), - ok; - JobSock -> - %% i'm a remote target - request(JobSock,{apply,MFA}), - ok - end. - -request(Sock,Request) -> - gen_tcp:send(Sock,<<1,(term_to_binary(Request))/binary>>). - -%% -%% Generic receive function for communication with host -%% -recv(Sock) -> - case gen_tcp:recv(Sock,0) of - {error,closed} -> - gen_tcp:close(Sock), - exit(connection_lost); - {ok,<<1,Request/binary>>} -> - binary_to_term(Request); - {ok,<<0,B/binary>>} -> - B +sync_local_or_remote_apply(Proxy, From, {M,F,A}) -> + %% i'm a local target + Result = apply(M, F, A), + if is_pid(Proxy) -> Proxy ! {sync_result_proxy,From,Result}; + true -> From ! {sync_result,Result} end. diff --git a/lib/test_server/src/test_server_ctrl.erl b/lib/test_server/src/test_server_ctrl.erl index 7f04e2eb23..bc08c12089 100644 --- a/lib/test_server/src/test_server_ctrl.erl +++ b/lib/test_server/src/test_server_ctrl.erl @@ -34,118 +34,6 @@ %% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% ARCHITECTURE -%% -%% The Erlang Test Server can be run on the target machine (local target) -%% or towards a remote target. The execution flow is mainly the same in -%% both cases, but with a remote target the test cases are (obviously) -%% executed on the target machine. Host and target communicates over -%% socket connections because the host should not be introduced as an -%% additional node in the distributed erlang system in which the test -%% cases are run. -%% -%% -%% Local Target: -%% ============= -%% -%% ----- -%% | | test_server_ctrl ({global,test_server}) -%% ----- (test_server_ctrl.erl) -%% | -%% | -%% ----- -%% | | JobProc -%% ----- (test_server_ctrl.erl and test_server.erl) -%% | -%% | -%% ----- -%% | | CaseProc -%% ----- (test_server.erl) -%% -%% -%% -%% test_server_ctrl is the main process in the system. It is a registered -%% process, and it will always be alive when testing is ongoing. -%% test_server_ctrl initiates testing and monitors JobProc(s). -%% -%% When target is local, and Test Server is *not* being used by a framework -%% application (where it might cause duplicate name problems in a distributed -%% test environment), the process is globally registered as 'test_server' -%% to be able to simulate the {global,test_server} process on a remote target. -%% -%% JobProc is spawned for each 'job' added to the test_server_ctrl. -%% A job can mean one test case, one test suite or one spec. -%% JobProc creates and writes logs and presents results from testing. -%% JobProc is the group leader for CaseProc. -%% -%% CaseProc is spawned for each test case. It runs the test case and -%% sends results and any other information to its group leader - JobProc. -%% -%% -%% -%% Remote Target: -%% ============== -%% -%% HOST TARGET -%% -%% ----- MainSock ----- -%% test_server_ctrl | |- - - - - - -| | {global,test_server} -%% (test_server_ctrl.erl) ----- ----- (test_server.erl) -%% | | -%% | | -%% ----- JobSock ----- -%% JobProcH | |- - - - - - -| | JobProcT -%% (test_server_ctrl.erl) ----- ----- (test_server.erl) -%% | -%% | -%% ----- -%% | | CaseProc -%% ----- (test_server.erl) -%% -%% -%% -%% -%% A separate test_server process only exists when target is remote. It -%% is then the main process on target. It is started when test_server_ctrl -%% is started, and a socket connection is established between -%% test_server_ctrl and test_server. The following information can be sent -%% over MainSock: -%% -%% HOST TARGET -%% -> {target_info, TargetInfo} (during initiation) -%% <- {job_proc_killed,Name,Reason} (if a JobProcT dies unexpectedly) -%% -> {job,Port,Name} (to start a new JobProcT) -%% -%% -%% When target is remote, JobProc is split into to processes: JobProcH -%% executing on Host and JobProcT executing on Target. (The two processes -%% execute the same code as JobProc does when target is local.) JobProcH -%% and JobProcT communicates over a socket connection. The following -%% information can be sent over JobSock: -%% -%% HOST TARGET -%% -> {test_case, Case} To start a new test case -%% -> {beam,Mod} .beam file as binary to be loaded -%% on target, e.g. a test suite -%% -> {datadir,Tarfile} Content of the datadir for a test suite -%% <- {apply,MFA} MFA to be applied on host, ignore return; -%% (apply is used for printing information in -%% log or console) -%% <- {sync_apply,MFA} MFA to be applied on host, wait for return -%% (used for starting and stopping slave nodes) -%% -> {sync_apply,MFA} MFA to be applied on target, wait for return -%% (used for cover compiling and analysing) -%% <-> {sync_result,Result} Return value from sync_apply -%% <- {test_case_result,Result} When a test case is finished -%% <- {crash_dumps,Tarfile} When a test case is finished -%% -> job_done When a job is finished -%% <- {privdir,Privdir} When a job is finished -%% -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% - - - %%% SUPERVISOR INTERFACE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -export([start/0, start/1, start_link/1, stop/0]). @@ -165,8 +53,8 @@ -export([reject_io_reqs/1, get_levels/0, set_levels/3]). -export([multiply_timetraps/1, scale_timetraps/1, get_timetrap_parameters/0]). -export([create_priv_dir/1]). --export([cover/2, cover/3, cover/7, - cross_cover_analyse/1, cross_cover_analyse/2, trc/1, stop_trace/0]). +-export([cover/2, cover/3, cover/8, + cross_cover_analyse/2, cross_cover_analyse/3, trc/1, stop_trace/0]). -export([testcase_callback/1]). -export([set_random_seed/1]). -export([kill_slavenodes/0]). @@ -177,7 +65,6 @@ -export([format/1, format/2, format/3, to_string/1]). -export([get_target_info/0]). -export([get_hosts/0]). --export([get_target_os_type/0]). -export([node_started/1]). %%% DEBUGGER INTERFACE %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% @@ -463,8 +350,7 @@ wait_finish() -> ok. abort_current_testcase(Reason) -> - controller_call({abort_current_testcase,Reason}), - ok. + controller_call({abort_current_testcase,Reason}). abort() -> OldTrap = process_flag(trap_exit, true), @@ -521,9 +407,9 @@ cover(App, Analyse) when is_atom(App) -> cover(CoverFile, Analyse) -> cover(none, CoverFile, Analyse). cover(App, CoverFile, Analyse) -> - controller_call({cover,{App,CoverFile},Analyse}). -cover(App, CoverFile, Exclude, Include, Cross, Export, Analyse) -> - controller_call({cover,{App,{CoverFile,Exclude,Include,Cross,Export}},Analyse}). + controller_call({cover,{App,CoverFile},Analyse,true}). +cover(App, CoverFile, Exclude, Include, Cross, Export, Analyse, Stop) -> + controller_call({cover,{App,{CoverFile,Exclude,Include,Cross,Export}},Analyse,Stop}). testcase_callback(ModFunc) -> controller_call({testcase_callback,ModFunc}). @@ -537,20 +423,6 @@ kill_slavenodes() -> get_hosts() -> get(test_server_hosts). -get_target_os_type() -> - case whereis(?MODULE) of - undefined -> - %% This is probably called on the target node - os:type(); - Pid when Pid =:= self() -> - os:type(); - _pid -> - %% This is called on the controller, e.g. from a - %% specification clause of a test case - #target_info{os_type=OsType} = controller_call(get_target_info), - OsType - end. - %%-------------------------------------------------------------------- add_job(Name, TopCase) -> @@ -606,7 +478,7 @@ controller_call(Arg, Timeout) -> %% Mode 'lazy' ignores (and resets to []) any jobs in the state file %% -init([Param]) -> +init([_]) -> case os:getenv("TEST_SERVER_CALL_TRACE") of false -> ok; @@ -632,104 +504,14 @@ init([Param]) -> test_server_sup:cleanup_crash_dumps(), State = #state{jobs=[],finish=false}, put(test_server_free_targets,[]), - case contact_main_target(Param) of - {ok,TI} -> - ets:new(slave_tab, [named_table,set,public,{keypos,2}]), - set_hosts([TI#target_info.host]), - {ok,State#state{target_info=TI}}; - {error,Reason} -> - {stop,Reason} - end. - - -%% If the test is to be run at a remote target, this function sets up -%% a socket communication with the target. -contact_main_target(local) -> - %% When used by a general framework, global registration of - %% test_server should not be required. - case get_fw_mod(undefined) of - undefined -> - %% Local target! The global test_server process implemented by - %% test_server.erl will not be started, so we simulate it by - %% globally registering this process instead. - global:sync(), - case global:whereis_name(test_server) of - undefined -> - global:register_name(test_server, self()); - Pid -> - case node() of - N when N == node(Pid) -> - io:format(user, "Warning: test_server already running!\n", []), - global:re_register_name(test_server,self()); - _ -> - ok - end - end; - _ -> - ok - end, - TI = test_server:init_target_info(), + TI0 = test_server:init_target_info(), TargetHost = test_server_sup:hoststr(), - {ok,TI#target_info{where=local, - host=TargetHost, - naming=naming(), - master=TargetHost}}; - -contact_main_target(ParameterFile) -> - case read_parameters(ParameterFile) of - {ok,Par} -> - case test_server_node:start_remote_main_target(Par) of - {ok,TI} -> - {ok,TI}; - {error,Error} -> - {error,{could_not_start_main_target,Error}} - end; - {error,Error} -> - {error,{could_not_read_parameterfile,Error}} - end. - -read_parameters(File) -> - case file:consult(File) of - {ok,Data} -> - read_parameters(lists:flatten(Data), #par{naming=naming()}); - Error -> - Error - end. -read_parameters([{type,Type}|Data], Par) -> % mandatory - read_parameters(Data, Par#par{type=Type}); -read_parameters([{target,Target}|Data], Par) -> % mandatory - read_parameters(Data, Par#par{target=cast_to_list(Target)}); -read_parameters([{slavetargets,SlaveTargets}|Data], Par) -> - read_parameters(Data, Par#par{slave_targets=SlaveTargets}); -read_parameters([{longnames,Bool}|Data], Par) -> - Naming = if Bool->"-name"; true->"-sname" end, - read_parameters(Data, Par#par{naming=Naming}); -read_parameters([{master,{Node,Cookie}}|Data], Par) -> - read_parameters(Data, Par#par{master=cast_to_list(Node), - cookie=cast_to_list(Cookie)}); -read_parameters([Other|_Data], _Par) -> - {error,{illegal_parameter,Other}}; -read_parameters([], Par) when Par#par.type==undefined -> - {error, {missing_mandatory_parameter,type}}; -read_parameters([], Par) when Par#par.target==undefined -> - {error, {missing_mandatory_parameter,target}}; -read_parameters([], Par0) -> - Par = - case {Par0#par.type, Par0#par.master} of - {ose, undefined} -> - %% Use this node as master and bootserver for target - %% and slave nodes - Par0#par{master = atom_to_list(node()), - cookie = atom_to_list(erlang:get_cookie())}; - {ose, _Master} -> - %% Master for target and slave nodes was defined in parameterfile - Par0; - _ -> - %% Use target as master for slave nodes, - %% (No master is used for target) - Par0#par{master="test_server@" ++ Par0#par.target} - end, - {ok,Par}. + TI = TI0#target_info{host=TargetHost, + naming=naming(), + master=TargetHost}, + ets:new(slave_tab, [named_table,set,public,{keypos,2}]), + set_hosts([TI#target_info.host]), + {ok,State#state{target_info=TI}}. naming() -> case lists:member($., test_server_sup:hoststr()) of @@ -796,7 +578,7 @@ handle_call({add_job,Dir,Name,TopCase,Skip}, _From, State) -> ExtraTools = case State#state.cover of false -> []; - {App,Analyse} -> [{cover,App,Analyse}] + {App,Analyse,Stop} -> [{cover,App,Analyse,Stop}] end, ExtraTools1 = case State#state.random_seed of @@ -1052,13 +834,13 @@ handle_call(stop_trace, _From, State) -> {reply,R,State#state{trc=false}}; %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%% handle_call({cover,App,Analyse}, _, State) -> ok | {error,Reason} +%% handle_call({cover,App,Analyse,Stop}, _, State) -> ok | {error,Reason} %% %% All modules inn application App are cover compiled %% Analyse indicates on which level the coverage should be analysed -handle_call({cover,App,Analyse}, _From, State) -> - {reply,ok,State#state{cover={App,Analyse}}}; +handle_call({cover,App,Analyse,Stop}, _From, State) -> + {reply,ok,State#state{cover={App,Analyse,Stop}}}; %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% handle_call({create_priv_dir,Value}, _, State) -> ok | {error,Reason} @@ -1210,25 +992,17 @@ handle_cast({node_started,Node}, State) -> %% Pid = pid() %% Reason = term() %% -%% Handles exit messages from linked processes. Only test suites and -%% possibly a target client are expected to be linked. -%% When a test suite terminates, it is removed from the job queue. -%% If a target client terminates it means that we lost contact with -%% target. The test_server_ctrl process is terminated, and teminate/2 -%% will do the cleanup +%% Handles exit messages from linked processes. Only test suites are +%% expected to be linked. When a test suite terminates, it is removed +%% from the job queue. If a target client terminates it means that we +%% lost contact with target. The test_server_ctrl process is +%% terminated, and teminate/2 will do the cleanup handle_info({'EXIT',Pid,Reason}, State) -> case lists:keysearch(Pid,2,State#state.jobs) of false -> - TI = State#state.target_info, - case TI#target_info.target_client of - Pid -> - %% The target client died - lost contact with target - {stop,{lost_contact_with_target,Reason},State}; - _other -> - %% not our problem - {noreply,State} - end; + %% not our problem + {noreply,State}; {value,{Name,_}} -> NewJobs = lists:keydelete(Pid, 2, State#state.jobs), case Reason of @@ -1303,14 +1077,8 @@ handle_info({tcp_closed,Sock}, State=#state{trc=Sock}) -> %%! Maybe print something??? {noreply,State#state{trc=false}}; handle_info({tcp_closed,Sock}, State) -> - case test_server_node:nodedown(Sock,State#state.target_info) of - target_died -> - %% terminate/2 will do the cleanup - {stop,target_died,State}; - _ -> - {noreply,State} - end; - + test_server_node:nodedown(Sock, State#state.target_info), + {noreply,State}; handle_info(_, State) -> %% dummy; accept all, do nothing. {noreply, State}. @@ -1416,6 +1184,7 @@ init_tester(Mod, Func, Args, Dir, Name, {_,_,MinLev}=Levels, group_leader(test_server_io:get_gl(true), self()), {TimeMy,Result} = ts_tc(Mod, Func, Args), set_io_buffering(undefined), + test_server_io:set_job_name(undefined), catch stop_extra_tools(StartedExtraTools), case Result of {'EXIT',test_suites_done} -> @@ -1465,11 +1234,11 @@ elapsed_time(Before, After) -> start_extra_tools(ExtraTools) -> start_extra_tools(ExtraTools, []). -start_extra_tools([{cover,App,Analyse} | ExtraTools], Started) -> +start_extra_tools([{cover,App,Analyse,Stop} | ExtraTools], Started) -> case cover_compile(App) of {ok,AnalyseMods} -> start_extra_tools(ExtraTools, - [{cover,App,Analyse,AnalyseMods}|Started]); + [{cover,App,Analyse,AnalyseMods,Stop}|Started]); {error,_} -> start_extra_tools(ExtraTools, Started) end; @@ -1488,8 +1257,8 @@ stop_extra_tools(ExtraTools) -> end, stop_extra_tools(ExtraTools, TestDir). -stop_extra_tools([{cover,App,Analyse,AnalyseMods}|ExtraTools], TestDir) -> - cover_analyse(App, Analyse, AnalyseMods, TestDir), +stop_extra_tools([{cover,App,Analyse,AnalyseMods,Stop}|ExtraTools], TestDir) -> + cover_analyse(App, Analyse, AnalyseMods, Stop, TestDir), stop_extra_tools(ExtraTools, TestDir); %%stop_extra_tools([_ | ExtraTools], TestDir) -> %% stop_extra_tools(ExtraTools, TestDir); @@ -2027,7 +1796,7 @@ start_minor_log_file1(Mod, Func, LogDir, AbsName, MFA) -> lists:member(no_src, get(test_server_logopts))} of {true,false} -> print(Lev, "<a href=\"~s#~s\">source code for ~p:~p/1</a>\n", - [SrcListing,Func,Mod,Func]); + [SrcListing,atom_to_list(Func)++"-1",Mod,Func]); _ -> ok end, @@ -2318,9 +2087,7 @@ do_add_end_per_suite_and_skip(LastMod, LastRef, Mod, FwMod) -> %% Runs the specified tests, then displays/logs the summary. run_test_cases(TestSpec, Config, TimetrapData) -> - - maybe_open_job_sock(), - + test_server:init_purify(), case lists:member(no_src, get(test_server_logopts)) of true -> ok; @@ -2330,8 +2097,6 @@ run_test_cases(TestSpec, Config, TimetrapData) -> run_test_cases_loop(TestSpec, [Config], TimetrapData, [], []), - maybe_get_privdir(), - {AllSkippedN,UserSkipN,AutoSkipN,SkipStr} = case get(test_server_skipped) of {0,0} -> {0,0,0,""}; @@ -2350,41 +2115,6 @@ run_test_cases(TestSpec, Config, TimetrapData) -> print(major, "=auto_skipped ~p", [AutoSkipN]), exit(test_suites_done). -%% If the test is run at a remote target, this function sets up a socket -%% communication with the target for handling this particular job. -maybe_open_job_sock() -> - TI = get_target_info(), - case TI#target_info.where of - local -> - %% local target - test_server:init_purify(); - MainSock -> - %% remote target - {ok,LSock} = gen_tcp:listen(0, [binary, - {reuseaddr,true}, - {packet,4}, - {active,false}]), - {ok,Port} = inet:port(LSock), - request(MainSock, {job,Port,get(test_server_name)}), - case gen_tcp:accept(LSock, ?ACCEPT_TIMEOUT) of - {ok,Sock} -> put(test_server_ctrl_job_sock, Sock); - {error,Reason} -> exit({no_contact,Reason}) - end - end. - -%% If the test is run at a remote target, this function waits for a -%% tar packet containing the privdir created by the test case. -maybe_get_privdir() -> - case get(test_server_ctrl_job_sock) of - undefined -> - %% local target - ok; - Sock -> - %% remote target - request(Sock, job_done), - gen_tcp:close(Sock) - end. - %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% run_test_cases_loop(TestCases, Config, TimetrapData, Mode, Status) -> ok @@ -2899,7 +2629,7 @@ run_test_cases_loop([{conf,Ref,Props,{Mod,Func}}|_Cases]=Cs0, end, CurrMode = curr_mode(Ref, Mode0, Mode), - ConfCaseResult = run_test_case(Ref, 0, Mod, Func, [ActualCfg], skip_init, target, + ConfCaseResult = run_test_case(Ref, 0, Mod, Func, [ActualCfg], skip_init, TimetrapData, CurrMode), case ConfCaseResult of @@ -2933,6 +2663,7 @@ run_test_cases_loop([{conf,Ref,Props,{Mod,Func}}|_Cases]=Cs0, exit(framework_error); {_,Fail,_} when element(1,Fail) == 'EXIT'; element(1,Fail) == timetrap_timeout; + element(1,Fail) == user_timetrap_error; element(1,Fail) == failed -> {Cases2,Config1,Status3} = if StartConf -> @@ -2952,14 +2683,6 @@ run_test_cases_loop([{conf,Ref,Props,{Mod,Func}}|_Cases]=Cs0, set_io_buffering(IOHandler), stop_minor_log_file(), run_test_cases_loop(Cases2, Config1, TimetrapData, Mode, Status3); - {died,Why,_} when Func == init_per_suite -> - print(minor, "~n*** Unexpected exit during init_per_suite.~n", []), - Reason = {failed,{Mod,init_per_suite,Why}}, - Cases2 = skip_cases_upto(Ref, Cases, Reason, conf, CurrMode), - set_io_buffering(IOHandler), - stop_minor_log_file(), - run_test_cases_loop(Cases2, Config, TimetrapData, Mode, - delete_status(Ref, Status2)); {_,{Skip,Reason},_} when StartConf and ((Skip==skip) or (Skip==skipped)) -> ReportAbortRepeat(skipped), print(minor, "~n*** ~p skipped.~n" @@ -3030,7 +2753,7 @@ run_test_cases_loop([{conf,Ref,Props,{Mod,Func}}|_Cases]=Cs0, end; run_test_cases_loop([{make,Ref,{Mod,Func,Args}}|Cases0], Config, TimetrapData, Mode, Status) -> - case run_test_case(Ref, 0, Mod, Func, Args, skip_init, host, TimetrapData) of + case run_test_case(Ref, 0, Mod, Func, Args, skip_init, TimetrapData) of {_,Why={'EXIT',_},_} -> print(minor, "~n*** ~p failed.~n" " Skipping all cases.", [Func]), @@ -3075,7 +2798,7 @@ run_test_cases_loop([{Mod,Func,Args}|Cases], Config, TimetrapData, Mode, Status) end, case run_test_case(undefined, Num+1, Mod, Func, Args, - run_init, target, TimetrapData, Mode) of + run_init, TimetrapData, Mode) of %% callback to framework module failed, exit immediately {_,{framework_error,{FwMod,FwFunc},Reason},_} -> print(minor, "~n*** ~p failed in ~p. Reason: ~p~n", [FwMod,FwFunc,Reason]), @@ -3711,6 +3434,11 @@ handle_io_and_exit_loop(_, [], Ok,Skip,Fail) -> handle_io_and_exits(Main, CurrPid, CaseNum, Mod, Func, Cases) -> receive + {abort_current_testcase=Tag,_Reason,From} -> + %% If a parallel group is executing, there is no unique + %% current test case, so we must generate an error. + From ! {self(),Tag,{error,parallel_group}}, + handle_io_and_exits(Main, CurrPid, CaseNum, Mod, Func, Cases); %% end of io session from test case executed by main process {finished,_,Main,CaseNum,Mod,Func,Result,_RetVal} -> test_server_io:print_buffered(CurrPid), @@ -3764,23 +3492,23 @@ handle_io_and_exits(Main, CurrPid, CaseNum, Mod, Func, Cases) -> %% RetVal is the result of executing the test case. It contains info %% about the execution time and the return value of the test case function. -run_test_case(Ref, Num, Mod, Func, Args, RunInit, Where, TimetrapData) -> +run_test_case(Ref, Num, Mod, Func, Args, RunInit, TimetrapData) -> file:set_cwd(filename:dirname(get(test_server_dir))), - run_test_case1(Ref, Num, Mod, Func, Args, RunInit, Where, + run_test_case1(Ref, Num, Mod, Func, Args, RunInit, TimetrapData, [], self()). -run_test_case(Ref, Num, Mod, Func, Args, skip_init, Where, TimetrapData, Mode) -> +run_test_case(Ref, Num, Mod, Func, Args, skip_init, TimetrapData, Mode) -> %% a conf case is always executed by the main process - run_test_case1(Ref, Num, Mod, Func, Args, skip_init, Where, + run_test_case1(Ref, Num, Mod, Func, Args, skip_init, TimetrapData, Mode, self()); -run_test_case(Ref, Num, Mod, Func, Args, RunInit, Where, TimetrapData, Mode) -> +run_test_case(Ref, Num, Mod, Func, Args, RunInit, TimetrapData, Mode) -> file:set_cwd(filename:dirname(get(test_server_dir))), Main = self(), case check_prop(parallel, Mode) of false -> %% this is a sequential test case - run_test_case1(Ref, Num, Mod, Func, Args, RunInit, Where, + run_test_case1(Ref, Num, Mod, Func, Args, RunInit, TimetrapData, Mode, Main); _Ref -> %% this a parallel test case, spawn the new process @@ -3792,11 +3520,11 @@ run_test_case(Ref, Num, Mod, Func, Args, RunInit, Where, TimetrapData, Mode) -> [put(Key, Val) || {Key,Val} <- Dictionary], set_io_buffering({tc,Main}), run_test_case1(Ref, Num, Mod, Func, Args, RunInit, - Where, TimetrapData, Mode, Main) + TimetrapData, Mode, Main) end) end. -run_test_case1(Ref, Num, Mod, Func, Args, RunInit, Where, +run_test_case1(Ref, Num, Mod, Func, Args, RunInit, TimetrapData, Mode, Main) -> group_leader(test_server_io:get_gl(Main == self()), self()), @@ -3809,12 +3537,6 @@ run_test_case1(Ref, Num, Mod, Func, Args, RunInit, Where, Main ! {started,Ref,self(),Num,Mod,Func} end, TSDir = get(test_server_dir), - case Where of - target -> - maybe_send_beam_and_datadir(Mod); - host -> - ok - end, print(major, "=case ~p:~p", [Mod, Func]), MinorName = start_minor_log_file(Mod, Func), @@ -3872,7 +3594,7 @@ run_test_case1(Ref, Num, Mod, Func, Args, RunInit, Where, %% run the test case {Result,DetectedFail,ProcsBefore,ProcsAfter} = run_test_case_apply(Num, Mod, Func, [UpdatedArgs], get_name(Mode), - RunInit, Where, TimetrapData), + RunInit, TimetrapData), {Time,RetVal,Loc,Opts,Comment} = case Result of Normal={_Time,_RetVal,_Loc,_Opts,_Comment} -> Normal; @@ -3989,7 +3711,7 @@ run_test_case1(Ref, Num, Mod, Func, Args, RunInit, Where, true -> ok end, - check_new_crash_dumps(Where), + test_server_sup:check_new_crash_dumps(), %% if io is being buffered, send finished message %% (no matter if case runs on parallel or main process) @@ -4017,109 +3739,6 @@ do_unless_parallel(Main, Action) when is_function(Action, 0) -> num2str(0) -> ""; num2str(N) -> integer_to_list(N). -%% If remote target, this function sends the test suite (if not already sent) -%% and the content of datadir til target. -maybe_send_beam_and_datadir(Mod) -> - case get(test_server_ctrl_job_sock) of - undefined -> - %% local target - ok; - JobSock -> - %% remote target - case get(test_server_downloaded_suites) of - undefined -> - send_beam_and_datadir(Mod, JobSock), - put(test_server_downloaded_suites, [Mod]); - Suites -> - case lists:member(Mod, Suites) of - false -> - send_beam_and_datadir(Mod, JobSock), - put(test_server_downloaded_suites, [Mod|Suites]); - true -> - ok - end - end - end. - -send_beam_and_datadir(Mod, JobSock) -> - case code:which(Mod) of - non_existing -> - io:format("** WARNING: Suite ~w could not be found on host\n", - [Mod]); - BeamFile -> - send_beam(JobSock, Mod, BeamFile) - end, - DataDir = get_data_dir(Mod), - case file:read_file_info(DataDir) of - {ok,_I} -> - {ok,All} = file:list_dir(DataDir), - AddTarFiles = - case controller_call(get_target_info) of - #target_info{os_family=ose} -> - ObjExt = code:objfile_extension(), - Wc = filename:join(DataDir, "*" ++ ObjExt), - ModsInDatadir = filelib:wildcard(Wc), - SendBeamFun = fun(X) -> send_beam(JobSock, X) end, - lists:foreach(SendBeamFun, ModsInDatadir), - %% No need to send C code or makefiles since - %% no compilation can be done on target anyway. - %% Compiled C code must exist on target. - %% Beam files are already sent as binaries. - %% Erlang source are sent in case the test case - %% is to compile it. - Filter = fun("Makefile") -> false; - ("Makefile.src") -> false; - (Y) -> - case filename:extension(Y) of - ".c" -> false; - ObjExt -> false; - _ -> true - end - end, - lists:filter(Filter, All); - _ -> - All - end, - Tarfile = "data_dir.tar.gz", - {ok,Tar} = erl_tar:open(Tarfile, [write,compressed]), - ShortDataDir = filename:basename(DataDir), - AddTarFun = - fun(File) -> - Long = filename:join(DataDir, File), - Short = filename:join(ShortDataDir, File), - ok = erl_tar:add(Tar, Long, Short, []) - end, - lists:foreach(AddTarFun, AddTarFiles), - ok = erl_tar:close(Tar), - {ok,TarBin} = file:read_file(Tarfile), - file:delete(Tarfile), - request(JobSock, {{datadir,Tarfile}, TarBin}); - {error,_R} -> - ok - end. - -send_beam(JobSock, BeamFile) -> - Mod=filename:rootname(filename:basename(BeamFile), code:objfile_extension()), - send_beam(JobSock, list_to_atom(Mod), BeamFile). -send_beam(JobSock, Mod, BeamFile) -> - {ok,BeamBin} = file:read_file(BeamFile), - request(JobSock, {{beam,Mod,BeamFile}, BeamBin}). - -check_new_crash_dumps(Where) -> - case Where of - target -> - case get(test_server_ctrl_job_sock) of - undefined -> - ok; - Socket -> - read_job_sock_loop(Socket) - end; - _ -> - ok - end, - test_server_sup:check_new_crash_dumps(). - - %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% progress(Result, CaseNum, Mod, Func, Location, Reason, Time, %% Comment, TimeFormat) -> Result @@ -4487,11 +4106,10 @@ do_format_exception(Reason={Error,Stack}) -> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% run_test_case_apply(CaseNum, Mod, Func, Args, Name, RunInit, -%% Where, TimetrapData) -> +%% TimetrapData) -> %% {{Time,RetVal,Loc,Opts,Comment},DetectedFail,ProcessesBefore,ProcessesAfter} | %% {{died,Reason,unknown,Comment},DetectedFail,ProcessesBefore,ProcessesAfter} %% Name = atom() -%% Where = target | host %% Time = float() (seconds) %% RetVal = term() %% Loc = term() @@ -4506,23 +4124,10 @@ do_format_exception(Reason={Error,Stack}) -> %% sent over socket to target, and test_server runs the case and sends the %% result back over the socket. Else test_server runs the case directly on host. -run_test_case_apply(CaseNum, Mod, Func, Args, Name, RunInit, host, +run_test_case_apply(CaseNum, Mod, Func, Args, Name, RunInit, TimetrapData) -> test_server:run_test_case_apply({CaseNum,Mod,Func,Args,Name,RunInit, - TimetrapData}); -run_test_case_apply(CaseNum, Mod, Func, Args, Name, RunInit, target, - TimetrapData) -> - case get(test_server_ctrl_job_sock) of - undefined -> - %% local target - test_server:run_test_case_apply({CaseNum,Mod,Func,Args,Name,RunInit, - TimetrapData}); - JobSock -> - %% remote target - request(JobSock, {test_case,{CaseNum,Mod,Func,Args,Name,RunInit, - TimetrapData}}), - read_job_sock_loop(JobSock) - end. + TimetrapData}). %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% print(Detail, Format, Args) -> ok @@ -5119,7 +4724,7 @@ get_target_info() -> %% Called by test_server. See test_server:start_node/3 for details start_node(Name, Type, Options) -> - T = 10 * ?ACCEPT_TIMEOUT, % give some extra time + T = 10 * ?ACCEPT_TIMEOUT * test_server:timetrap_scale_factor(), format(minor, "Attempt to start ~w node ~p with options ~p", [Type, Name, Options]), case controller_call({start_node,Name,Type,Options}, T) of @@ -5164,7 +4769,8 @@ start_node(Name, Type, Options) -> %% when the new node has contacted test_server_ctrl again wait_for_node(Slave) -> - case catch controller_call({wait_for_node,Slave},10000) of + T = 10000 * test_server:timetrap_scale_factor(), + case catch controller_call({wait_for_node,Slave},T) of {'EXIT',{timeout,_}} -> {error,timeout}; ok -> ok end. @@ -5188,60 +4794,6 @@ stop_node(Slave) -> controller_call({stop_node,Slave}). -%%-------------------------------------------------------------------- -%% Functions handling target communication over socket - -%% Generic send function for communication with target -request(Sock,Request) -> - gen_tcp:send(Sock,<<1,(term_to_binary(Request))/binary>>). - -%% Receive and decode request on job specific socket -%% Used when test is running on a remote target -read_job_sock_loop(Sock) -> - case gen_tcp:recv(Sock,0) of - {error,Reason} -> - gen_tcp:close(Sock), - exit({controller,connection_lost,Reason}); - {ok,<<1,Request/binary>>} -> - case decode(binary_to_term(Request)) of - ok -> - read_job_sock_loop(Sock); - {stop,Result} -> - Result - end - end. - -decode({apply,{M,F,A}}) -> - apply(M,F,A), - ok; -decode({sync_apply,{M,F,A}}) -> - R = apply(M,F,A), - request(get(test_server_ctrl_job_sock),{sync_result,R}), - ok; -decode({sync_result,Result}) -> - {stop,Result}; -decode({test_case_result,Result}) -> - {stop,Result}; -decode({privdir,empty_priv_dir}) -> - {stop,ok}; -decode({{privdir,PrivDirTar},TarBin}) -> - Root = get(test_server_log_dir_base), - unpack_tar(Root,PrivDirTar,TarBin), - {stop,ok}; -decode({crash_dumps,no_crash_dumps}) -> - {stop,ok}; -decode({{crash_dumps,CrashDumpTar},TarBin}) -> - Dir = test_server_sup:crash_dump_dir(), - unpack_tar(Dir,CrashDumpTar,TarBin), - {stop,ok}. - -unpack_tar(Dir,TarFileName0,TarBin) -> - TarFileName = filename:join(Dir,TarFileName0), - ok = file:write_file(TarFileName,TarBin), - ok = erl_tar:extract(TarFileName,[compressed,{cwd,Dir}]), - ok = file:delete(TarFileName). - - %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %% DEBUGGER INTERFACE %% %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% @@ -5386,16 +4938,7 @@ cover_compile({App,CoverFile}) -> cover_compile1({App,Exclude,Include,Cross}). cover_compile1(What) -> - case get(test_server_ctrl_job_sock) of - undefined -> - %% local target - test_server:cover_compile(What); - JobSock -> - %% remote target - request(JobSock, {sync_apply,{test_server,cover_compile,[What]}}), - read_job_sock_loop(JobSock) - end. - + test_server:cover_compile(What). %% Read the coverfile for an application and return a list of modules %% that are members of the application but shall not be compiled @@ -5447,7 +4990,7 @@ check_cover_file([], Exclude, Include) -> %% %% This per application analysis writes the file cover.html in the %% application's run.<timestamp> directory. -cover_analyse({App,CoverInfo}, Analyse, AnalyseMods, TestDir) -> +cover_analyse({App,CoverInfo}, Analyse, AnalyseMods, Stop, TestDir) -> write_default_cross_coverlog(TestDir), {ok,CoverLog} = file:open(filename:join(TestDir, ?coverlog_name), [write]), @@ -5478,7 +5021,7 @@ cover_analyse({App,CoverInfo}, Analyse, AnalyseMods, TestDir) -> io:fwrite(CoverLog, "<p>Excluded module(s): <code>~p</code>\n", [Excluded]), - Coverage = cover_analyse(Analyse, AnalyseMods), + Coverage = cover_analyse(Analyse, AnalyseMods, Stop), case lists:filter(fun({_M,{_,_,_}}) -> false; (_) -> true @@ -5495,32 +5038,27 @@ cover_analyse({App,CoverInfo}, Analyse, AnalyseMods, TestDir) -> file:write_file(filename:join(TestDir, ?cover_total), term_to_binary(TotPercent)). -cover_analyse(Analyse, AnalyseMods) -> +cover_analyse(Analyse, AnalyseMods, Stop) -> TestDir = get(test_server_log_dir_base), - case get(test_server_ctrl_job_sock) of - undefined -> - %% local target - test_server:cover_analyse({Analyse,TestDir}, AnalyseMods); - JobSock -> - %% remote target - request(JobSock, {sync_apply,{test_server, - cover_analyse, - [Analyse,AnalyseMods]}}), - read_job_sock_loop(JobSock) - end. + test_server:cover_analyse({Analyse,TestDir}, AnalyseMods, Stop). %% Cover analysis, cross application %% This can be executed on any node after all tests are finished. -%% The node's current directory must be the same as when the tests -%% were run. -cross_cover_analyse(Analyse) -> - cross_cover_analyse(Analyse, undefined). - -cross_cover_analyse(Analyse, CrossModules) -> - CoverdataFiles = get_coverdata_files(), +%% Apps = [{App,Dir}] +%% App = atom(), application name +%% Dir = string(), the log directory for App, normally where +%% run.<timestamp> is found. +%% Modules = [atom()], modules that have been cover compiled during tests +%% of other apps than the one they belong to. +cross_cover_analyse(Analyse, Apps) -> + cross_cover_analyse(Analyse, Apps, get_cross_modules()). +cross_cover_analyse(Analyse, Apps, Modules) -> + Apps1 = get_latest_run_dirs(Apps), + Apps2 = add_cross_modules(Modules,Apps1), + CoverdataFiles = get_coverdata_files(Apps2), lists:foreach(fun(CDF) -> cover:import(CDF) end, CoverdataFiles), - io:fwrite("Cover analysing... ", []), + io:fwrite("Cover analysing...\n", []), DetailsFun = case Analyse of details -> @@ -5534,25 +5072,15 @@ cross_cover_analyse(Analyse, CrossModules) -> _ -> fun(_,_) -> undefined end end, - SortedModules = - case CrossModules of - undefined -> - sort_modules([Mod || Mod <- get_all_cross_modules(), - lists:member(Mod, cover:imported_modules())], []); - _ -> - sort_modules(CrossModules, []) - end, - Coverage = analyse_apps(SortedModules, DetailsFun, []), + Coverage = analyse_apps(Apps2, DetailsFun, []), cover:stop(), - write_cross_cover_logs(Coverage). + write_cross_cover_logs(Coverage,Apps2). -%% For each application from which there are modules listed in the -%% cross.cover, write a cross cover log (cross_cover.html). -write_cross_cover_logs([{App,Coverage}|T]) -> - case last_test_for_app(App) of - false -> - ok; - Dir -> +%% For each application from which there are cross cover analysed +%% modules, write a cross cover log (cross_cover.html). +write_cross_cover_logs([{App,Coverage}|T],Apps) -> + case lists:keyfind(App,1,Apps) of + {_,Dir,Mods} when Mods=/=[] -> CoverLogName = filename:join(Dir,?cross_coverlog_name), {ok,CoverLog} = file:open(CoverLogName, [write]), write_coverlog_header(CoverLog), @@ -5560,54 +5088,51 @@ write_cross_cover_logs([{App,Coverage}|T]) -> "<h1>Coverage results for \'~w\' from all tests</h1>\n", [App]), write_cover_result_table(CoverLog, Coverage), - io:fwrite("Written file ~p\n", [CoverLogName]) + io:fwrite("Written file ~p\n", [CoverLogName]); + _ -> + ok end, - write_cross_cover_logs(T); -write_cross_cover_logs([]) -> + write_cross_cover_logs(T,Apps); +write_cross_cover_logs([],_) -> io:fwrite("done\n", []). -%% Find all exported coverdata files. First find all the latest -%% run.<timestamp> directories, and the check if there is a file named -%% all.coverdata. -get_coverdata_files() -> - PossibleFiles = [last_coverdata_file(Dir) || - Dir <- filelib:wildcard([$*|?logdir_ext]), - filelib:is_dir(Dir)], - [File || File <- PossibleFiles, filelib:is_file(File)]. - -last_coverdata_file(Dir) -> - LastDir = last_test(filelib:wildcard(filename:join(Dir,"run.[1-2]*")),false), - filename:join(LastDir,"all.coverdata"). - - -%% Find the latest run.<timestamp> directory for the given application. -last_test_for_app(App) -> - AppLogDir = atom_to_list(App)++?logdir_ext, - last_test(filelib:wildcard(filename:join(AppLogDir,"run.[1-2]*")),false). - -last_test([Run|Rest], false) -> - last_test(Rest, Run); -last_test([Run|Rest], Latest) when Run > Latest -> - last_test(Rest, Run); -last_test([_|Rest], Latest) -> - last_test(Rest, Latest); -last_test([], Latest) -> +%% Get the latest run.<timestamp> directories +get_latest_run_dirs([{App,Dir}|Apps]) -> + [{App,get_latest_run_dir(Dir)} | get_latest_run_dirs(Apps)]; +get_latest_run_dirs([]) -> + []. + +get_latest_run_dir(Dir) -> + case filelib:wildcard(filename:join(Dir,"run.[1-2]*")) of + [] -> + Dir; + [H|T] -> + get_latest_dir(T,H) + end. + +get_latest_dir([H|T],Latest) when H>Latest -> + get_latest_dir(T,H); +get_latest_dir([_|T],Latest) -> + get_latest_dir(T,Latest); +get_latest_dir([],Latest) -> Latest. -%% Sort modules according to the application they belong to. -%% Return [{App,LastTestDir,ModuleList}] -sort_modules([M|Modules], Acc) -> - App = get_app(M), - Acc1 = - case lists:keysearch(App, 1, Acc) of - {value,{App,LastTest,List}} -> - lists:keyreplace(App, 1, Acc, {App,LastTest,[M|List]}); +%% Associate the cross cover modules with their applications. +add_cross_modules(Mods,Apps)-> + do_add_cross_modules(Mods,[{App,Dir,[]} || {App,Dir} <- Apps]). +do_add_cross_modules([Mod|Mods],Apps)-> + App = get_app(Mod), + NewApps = + case lists:keytake(App,1,Apps) of + {value,{App,Dir,AppMods},Rest} -> + [{App,Dir,lists:umerge([Mod],AppMods)}|Rest]; false -> - [{App,last_test_for_app(App),[M]}|Acc] + Apps end, - sort_modules(Modules, Acc1); -sort_modules([], Acc) -> - Acc. + do_add_cross_modules(Mods,NewApps); +do_add_cross_modules([],Apps) -> + %% Just to get the modules in the same order as app-only cover log + [{App,Dir,lists:reverse(Mods)} || {App,Dir,Mods} <- Apps]. get_app(Module) -> Beam = code:which(Module), @@ -5615,6 +5140,14 @@ get_app(Module) -> [AppStr|_] = string:tokens(AppDir,"-"), list_to_atom(AppStr). +%% Find all exported coverdata files. +get_coverdata_files(Apps) -> + lists:flatmap( + fun({_,LatestAppDir,_}) -> + filelib:wildcard(filename:join(LatestAppDir,"all.coverdata")) + end, + Apps). + %% For each application, analyse all modules %% Used for cross cover analysis. @@ -5635,7 +5168,7 @@ analyse_modules(_Dir, [], _DetailsFun, Acc) -> %% Read the cross cover file (cross.cover) -get_all_cross_modules() -> +get_cross_modules() -> get_cross_modules(all). get_cross_modules(App) -> case file:consult(?cross_cover_file) of diff --git a/lib/test_server/src/test_server_h.erl b/lib/test_server/src/test_server_h.erl index fdeee59326..78daba855d 100644 --- a/lib/test_server/src/test_server_h.erl +++ b/lib/test_server/src/test_server_h.erl @@ -131,6 +131,11 @@ report_receiver(warning_msg, _) -> kernel; report_receiver(warning_report, _) -> kernel; report_receiver(info, _) -> kernel; report_receiver(info_msg, _) -> kernel; +report_receiver(info_report,Tuple) + when is_tuple(Tuple) andalso + (element(1,Tuple)==ct_connection orelse + element(1,Tuple)==conn_log) -> + none; report_receiver(info_report, _) -> kernel; report_receiver(_, _) -> none. diff --git a/lib/test_server/src/test_server_internal.hrl b/lib/test_server/src/test_server_internal.hrl index b58b42805e..d204c35293 100644 --- a/lib/test_server/src/test_server_internal.hrl +++ b/lib/test_server/src/test_server_internal.hrl @@ -24,8 +24,7 @@ %% Target information generated by test_server:init_target_info/0 and %% test_server_ctrl:contact_main_target/2 %% Once initiated, this information will never change!! --record(target_info, {where, % local | Socket - os_family, % atom(); win32 | unix +-record(target_info, {os_family, % atom(); win32 | unix os_type, % result of os:type() host, % string(); the name of the target machine version, % string() @@ -43,7 +42,6 @@ % itself is master for slave nodes %% The following are only used for remote targets - target_client, % reference to a client talking to target slave_targets=[]}).% list() of atom(); all available % targets for starting slavenodes diff --git a/lib/test_server/src/test_server_io.erl b/lib/test_server/src/test_server_io.erl index abdfb71241..777b377201 100644 --- a/lib/test_server/src/test_server_io.erl +++ b/lib/test_server/src/test_server_io.erl @@ -68,8 +68,8 @@ stop() -> %% Return a group leader (a process using the test_server_gl module). %% If Shared is true, the shared group leader is returned (suitable for %% running sequential test cases), otherwise a new group leader process -%% is spawned. Group leader processes will live until they are garbaged -%% collected by a call to gc/0. +%% is spawned. Group leader processes will live until the +%% 'test_server_io' process is stopped. get_gl(Shared) when is_boolean(Shared) -> req({get_gl,Shared}). @@ -95,7 +95,7 @@ start_transaction() -> %% end_transaction() %% %% End the transaction started by start_transaction/0. Subsequent calls to -%% print/3 will cause the message to be printed directory. +%% print/3 will cause the message to be printed directly. end_transaction() -> req({end_transaction,self()}). @@ -253,6 +253,8 @@ output(From, Tag, Str, #st{io_buffering=Buffered,buffered=Buf0}=St) -> St#st{buffered=Buf} end. +do_output(stdout, Str, #st{job_name=undefined}) -> + io:put_chars(Str); do_output(stdout, Str0, #st{job_name=Name}) -> Str = io_lib:format("Testing ~s: ~s\n", [Name,Str0]), io:put_chars(Str); @@ -305,8 +307,10 @@ do_print_buffered(Q0, St) -> gc(#st{gls=Gls0}) -> InUse0 = [begin - {group_leader,GL} = process_info(P, group_leader), - GL + case process_info(P, group_leader) of + {group_leader,GL} -> GL; + undefined -> undefined + end end || P <- processes()], InUse = ordsets:from_list(InUse0), Gls = gb_sets:to_list(Gls0), diff --git a/lib/test_server/src/test_server_node.erl b/lib/test_server/src/test_server_node.erl index 872f15f2be..b307d93c7d 100644 --- a/lib/test_server/src/test_server_node.erl +++ b/lib/test_server/src/test_server_node.erl @@ -26,7 +26,7 @@ %% Test Controller interface -export([is_release_available/1]). --export([start_remote_main_target/1,stop/1]). +-export([stop/1]). -export([start_tracer_node/2,trace_nodes/2,stop_tracer_node/1]). -export([start_node/5, stop_node/2]). -export([kill_nodes/1, nodedown/2]). @@ -57,79 +57,8 @@ is_release_available(Rel) -> false end. -%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% -%%% Start main target node on remote host -%%% The target node must not know the controller node via erlang distribution. -start_remote_main_target(Parameters) -> - #par{type=TargetType, - target=TargetHost, - naming=Naming, - master=MasterNode, - cookie=MasterCookie, - slave_targets=SlaveTargets} = Parameters, - - lists:foreach(fun(T) -> maybe_reboot_target({TargetType,T}) end, - [list_to_atom(TargetHost)|SlaveTargets]), - - Cmd0 = get_main_target_start_command(TargetType,TargetHost,Naming, - MasterNode,MasterCookie), - Cmd = - case os:getenv("TEST_SERVER_FRAMEWORK") of - FW when FW =:= false; FW =:= "undefined" -> Cmd0; - FW -> Cmd0 ++ " -env TEST_SERVER_FRAMEWORK " ++ FW - end, - - {ok,LSock} = gen_tcp:listen(?MAIN_PORT,[binary,{reuseaddr,true},{packet,2}]), - case start_target(TargetType,TargetHost,Cmd) of - {ok,TargetClient,AcceptTimeout} -> - case gen_tcp:accept(LSock,AcceptTimeout) of - {ok,Sock} -> - gen_tcp:close(LSock), - receive - {tcp,Sock,Bin} when is_binary(Bin) -> - case unpack(Bin) of - error -> - gen_tcp:close(Sock), - close_target_client(TargetClient), - {error,bad_message}; - {ok,{target_info,TI}} -> - put(test_server_free_targets,SlaveTargets), - {ok, TI#target_info{where=Sock, - host=TargetHost, - naming=Naming, - master=MasterNode, - target_client=TargetClient, - slave_targets=SlaveTargets}} - end; - {tcp_closed,Sock} -> - gen_tcp:close(Sock), - close_target_client(TargetClient), - {error,could_not_contact_target} - after AcceptTimeout -> - gen_tcp:close(Sock), - close_target_client(TargetClient), - {error,timeout} - end; - Error -> - %%! maybe something like kill_target(...)??? - gen_tcp:close(LSock), - close_target_client(TargetClient), - {error,{could_not_contact_target,Error}} - end; - Error -> - gen_tcp:close(LSock), - {error,{could_not_start_target,Error}} - end. - stop(TI) -> - kill_nodes(TI), - case TI#target_info.where of - local -> % there is no remote target to stop - ok; - Sock -> % stop remote target - gen_tcp:close(Sock), - close_target_client(TI#target_info.target_client) - end. + kill_nodes(TI). nodedown(Sock, TI) -> Match = #slave_info{name='$1',socket=Sock,client='$2',_='_'}, @@ -146,14 +75,8 @@ nodedown(Sock, TI) -> false -> ok end, slave_died; - [] -> - case TI#target_info.where of - Sock -> - %% test_server_ctrl will do the cleanup - target_died; - _ -> - ignore - end + [] -> + ok end. @@ -167,10 +90,7 @@ start_tracer_node(TraceFile,TI) -> Match = #slave_info{name='$1',_='_'}, SlaveNodes = lists:map(fun([N]) -> [" ",N] end, ets:match(slave_tab,Match)), - TargetNode = case TI#target_info.where of - local -> node(); - _ -> "test_server@" ++ TI#target_info.host - end, + TargetNode = node(), Cookie = TI#target_info.cookie, {ok,LSock} = gen_tcp:listen(0,[binary,{reuseaddr,true},{packet,2}]), {ok,TracePort} = inet:port(LSock), @@ -471,129 +391,29 @@ start_node_slave(SlaveName, OptList, From, TI) -> Ret = case start_which_node(OptList) of {error,Reason} -> {{error,Reason},undefined,undefined}; - Host0 -> do_start_node_slave(Host0,SlaveName,Args,Prog,Cleanup,TI) + Host0 -> do_start_node_slave(Host0,SlaveName,Args,Prog,Cleanup) end, gen_server:reply(From,Ret). -do_start_node_slave(Host0, SlaveName, Args, Prog, Cleanup, TI) -> - case TI#target_info.where of - local -> - Host = - case Host0 of - local -> test_server_sup:hoststr(); - _ -> cast_to_list(Host0) - end, - Cmd = Prog ++ " " ++ Args, - %% Can use slave.erl here because I'm both controller and target - %% so I will ping the new node anyway - case slave:start(Host, SlaveName, Args, no_link, Prog) of - {ok,Nodename} -> - case Cleanup of - true -> ets:insert(slave_tab,#slave_info{name=Nodename}); - false -> ok - end, - {{ok,Nodename}, Host, Cmd, [], []}; - Ret -> - {Ret, Host, Cmd} - end; - - _Sock -> - %% Cannot use slave.erl here because I'm only controller, and will - %% not ping the new node. Only target shall contact the new node!! - no_contact_start_slave(Host0,SlaveName,Args,Prog,Cleanup,TI) - end. - - - -no_contact_start_slave(Host, Name, Args0, Prog, Cleanup,TI) -> - Args1 = case string:str(Args0,"-setcookie") of - 0 -> "-setcookie " ++ TI#target_info.cookie ++ " " ++ Args0; - _ -> Args0 +do_start_node_slave(Host0, SlaveName, Args, Prog, Cleanup) -> + Host = + case Host0 of + local -> test_server_sup:hoststr(); + _ -> cast_to_list(Host0) + end, + Cmd = Prog ++ " " ++ Args, + %% Can use slave.erl here because I'm both controller and target + %% so I will ping the new node anyway + case slave:start(Host, SlaveName, Args, no_link, Prog) of + {ok,Nodename} -> + case Cleanup of + true -> ets:insert(slave_tab,#slave_info{name=Nodename}); + false -> ok end, - Args = TI#target_info.naming ++ " " ++ cast_to_list(Name) ++ " " ++ Args1, - case Host of - local -> - case get(test_server_free_targets) of - [] -> - io:format("Starting slave ~p on HOST~n", [Name]), - TargetType = test_server_sup:get_os_family(), - Cmd0 = get_slave_node_start_command(TargetType, - Prog, - TI#target_info.master), - Cmd = Cmd0 ++ " " ++ Args, - do_no_contact_start_slave(TargetType, - test_server_sup:hoststr(), - Cmd, Cleanup,TI, false); - [H|T] -> - TargetType = TI#target_info.os_family, - Cmd0 = get_slave_node_start_command(TargetType, - Prog, - TI#target_info.master), - Cmd = Cmd0 ++ " " ++ Args, - case do_no_contact_start_slave(TargetType,H,Cmd,Cleanup, - TI,true) of - {error,remove} -> - io:format("Cannot start node on ~p, " - "removing from slave " - "target list.", [H]), - put(test_server_free_targets,T), - no_contact_start_slave(Host,Name,Args,Prog, - Cleanup,TI); - {error,keep} -> - %% H is added to the END OF THE LIST - %% in order to avoid the same target to - %% be selected each time - put(test_server_free_targets,T++[H]), - no_contact_start_slave(Host,Name,Args,Prog, - Cleanup,TI); - R -> - put(test_server_free_targets,T), - R - end - end; - _ -> - TargetType = TI#target_info.os_family, - Cmd0 = get_slave_node_start_command(TargetType, - Prog, - TI#target_info.master), - Cmd = Cmd0 ++ " " ++ Args, - do_no_contact_start_slave(TargetType, Host, Cmd, Cleanup, TI, false) - end. - -do_no_contact_start_slave(TargetType,Host0,Cmd0,Cleanup,TI,Retry) -> - %% Must use TargetType instead of TI#target_info.os_familiy here - %% because if there were no free_targets we will be starting the - %% slave node on host which might have a different os_familiy - Host = cast_to_list(Host0), - {ok,LSock} = gen_tcp:listen(0,[binary, - {reuseaddr,true}, - {packet,2}]), - {ok,WaitPort} = inet:port(LSock), - Cmd = lists:concat([Cmd0, " -s ", ?MODULE, " node_started ", - test_server_sup:hoststr(), " ", WaitPort]), - - case start_target(TargetType,Host,Cmd) of - {ok,Client,AcceptTimeout} -> - case wait_for_node_started(LSock,AcceptTimeout, - Client,Cleanup,TI,self()) of - {error,_}=WaitError -> - if Retry -> - case maybe_reboot_target(Client) of - {error,_} -> {error,remove}; - ok -> {error,keep} - end; - true -> - {WaitError,Host,Cmd} - end; - {Ok,Warning} -> - {Ok,Host,Cmd,[],Warning} - end; - StartError -> - gen_tcp:close(LSock), - if Retry -> {error,remove}; - true -> {{error,{could_not_start_target,StartError}},Host,Cmd} - end + {{ok,Nodename}, Host, Cmd, [], []}; + Ret -> + {Ret, Host, Cmd} end. @@ -777,40 +597,10 @@ kill_node(SI,TI) -> %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%% Platform specific code -start_target(unix,TargetHost,Cmd0) -> - Cmd = - case test_server_sup:hoststr() of - TargetHost -> Cmd0; - _ -> lists:concat(["rsh ",TargetHost, " ", Cmd0]) - end, - open_port({spawn, Cmd}, [stream]), - {ok,undefined,?ACCEPT_TIMEOUT}. - -maybe_reboot_target(_) -> - {error, cannot_reboot_target}. - close_target_client(undefined) -> ok. - -%% -%% Command for starting main target -%% -get_main_target_start_command(unix,_TargetHost,Naming, - _MasterNode,_MasterCookie) -> - Prog = pick_erl_program(default), - Prog ++ " " ++ Naming ++ " test_server" ++ - " -boot start_sasl -sasl errlog_type error" - " -s test_server start " ++ test_server_sup:hoststr(). - -%% -%% Command for starting slave nodes -%% -get_slave_node_start_command(unix, Prog, MasterNode) -> - cast_to_list(Prog) ++ " -detached -master " ++ MasterNode. - - %%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%% %%% cast_to_list(X) -> string() %%% X = list() | atom() | void() diff --git a/lib/test_server/src/test_server_sup.erl b/lib/test_server/src/test_server_sup.erl index 3d00318b1b..c7553cccb5 100644 --- a/lib/test_server/src/test_server_sup.erl +++ b/lib/test_server/src/test_server_sup.erl @@ -520,7 +520,7 @@ framework_call(Callback,Func,Args,DefaultReturn) -> end, case SetTcState of true -> - test_server:set_tc_state({framework,Mod,Func}, undefined); + test_server:set_tc_state({framework,Mod,Func}); false -> ok end, @@ -568,16 +568,11 @@ format_loc1({Mod,Func,Line}) -> {false,[$E,$T,$I,$U,$S,$_|_]} -> io_lib:format("{~s,~w,<a href=\"~s~s#~w\">~w</a>}", [ModStr,Func,downcase(ModStr),?src_listing_ext, - round_to_10(Line),Line]); + Line,Line]); _ -> io_lib:format("{~s,~w,~w}",[ModStr,Func,Line]) end. -round_to_10(N) when (N rem 10) == 0 -> - N; -round_to_10(N) -> - trunc(N/10)*10. - downcase(S) -> downcase(S, []). downcase([Uc|Rest], Result) when $A =< Uc, Uc =< $Z -> downcase(Rest, [Uc-$A+$a|Result]); diff --git a/lib/test_server/src/ts.erl b/lib/test_server/src/ts.erl index db16b6ecd2..115e783070 100644 --- a/lib/test_server/src/ts.erl +++ b/lib/test_server/src/ts.erl @@ -259,14 +259,43 @@ run(List, Opts) when is_list(List), is_list(Opts) -> run(Testspec, Config) when is_atom(Testspec), is_list(Config) -> Options=check_test_get_opts(Testspec, Config), File=atom_to_list(Testspec), - Spec = case code:lib_dir(Testspec) of - {error, bad_name} when Testspec /= emulator, - Testspec /= system, - Testspec /= epmd -> - create_skip_spec(Testspec, tests(Testspec)); - _ -> - File++".spec" - end, + WhatToDo = + case Testspec of + %% Known to exist but fails generic tests below + emulator -> test; + system -> test; + erl_interface -> test; + epmd -> test; + _ -> + case code:lib_dir(Testspec) of + {error,bad_name} -> + %% Application does not exist + skip; + Path -> + case file:read_file_info(filename:join(Path,"ebin")) of + {ok,#file_info{type=directory}} -> + %% Erlang application is built + test; + _ -> + case filelib:wildcard( + filename:join([Path,"priv","*.jar"])) of + [] -> + %% The application is not built + skip; + [_|_] -> + %% Java application is built + test + end + end + end + end, + Spec = + case WhatToDo of + skip -> + create_skip_spec(Testspec, tests(Testspec)); + test -> + File++".spec" + end, run_test(File, [{spec,[Spec]}], Options); %% Runs one module in a spec (interactive) run(Testspec, Mod) when is_atom(Testspec), is_atom(Mod) -> @@ -498,8 +527,60 @@ estone(Opts) when is_list(Opts) -> run(emulator,estone_SUITE,Opts). cross_cover_analyse([Level]) -> cross_cover_analyse(Level); cross_cover_analyse(Level) -> - test_server_ctrl:cross_cover_analyse(Level). - + Apps = get_last_app_tests(), + Modules = get_cross_modules(Apps,[]), + test_server_ctrl:cross_cover_analyse(Level,Apps,Modules). + +get_last_app_tests() -> + AllTests = filelib:wildcard(filename:join(["*","*_test.logs"])), + {ok,RE} = re:compile("^[^/]*/[^\.]*\.(.*)_test\.logs$"), + get_last_app_tests(AllTests,RE,[]). + +get_last_app_tests([Dir|Dirs],RE,Acc) -> + NewAcc = + case re:run(Dir,RE,[{capture,all,list}]) of + {match,[Dir,AppStr]} -> + App = list_to_atom(AppStr), + case lists:keytake(App,1,Acc) of + {value,{App,LastDir},Rest} -> + if Dir > LastDir -> + [{App,Dir}|Rest]; + true -> + Acc + end; + false -> + [{App,Dir} | Acc] + end; + _ -> + Acc + end, + get_last_app_tests(Dirs,RE,NewAcc); +get_last_app_tests([],_,Acc) -> + Acc. + +get_cross_modules([{App,_}|Apps],Acc) -> + Mods = cross_modules(App), + get_cross_modules(Apps,lists:umerge(Mods,Acc)); +get_cross_modules([],Acc) -> + Acc. + +cross_modules(App) -> + case default_coverfile(App) of + none -> + []; + File -> + case catch file:consult(File) of + {ok,CoverSpec} -> + case lists:keyfind(cross_apps,1,CoverSpec) of + false -> + []; + {cross_apps,App,Modules} -> + lists:usort(Modules) + end; + _ -> + [] + end + end. %%% Implementation. diff --git a/lib/test_server/src/ts_run.erl b/lib/test_server/src/ts_run.erl index 57d1b8806e..741dd483f5 100644 --- a/lib/test_server/src/ts_run.erl +++ b/lib/test_server/src/ts_run.erl @@ -368,7 +368,7 @@ make_common_test_args(Args0, Options0, _Vars) -> io:format("No cover file found for ~p~n",[App]), []; {value,{cover,_App,File,_Analyse}} -> - [{cover,to_list(File)}]; + [{cover,to_list(File)},{cover_stop,false}]; false -> [] end, diff --git a/lib/test_server/test/Makefile b/lib/test_server/test/Makefile index a3f9820d7f..afccc28662 100644 --- a/lib/test_server/test/Makefile +++ b/lib/test_server/test/Makefile @@ -26,7 +26,8 @@ include $(ERL_TOP)/make/$(TARGET)/otp.mk MODULES= \ test_server_SUITE \ - test_server_test_lib + test_server_test_lib \ + erl2html2_SUITE ERL_FILES= $(MODULES:%=%.erl) diff --git a/lib/test_server/test/erl2html2_SUITE.erl b/lib/test_server/test/erl2html2_SUITE.erl new file mode 100644 index 0000000000..96175413a1 --- /dev/null +++ b/lib/test_server/test/erl2html2_SUITE.erl @@ -0,0 +1,254 @@ +%%%------------------------------------------------------------------- +%%% @author Siri Hansen <[email protected]> +%%% @copyright (C) 2012, Siri Hansen +%%% @doc +%%% +%%% @end +%%% Created : 15 Nov 2012 by Siri Hansen <[email protected]> +%%%------------------------------------------------------------------- +-module(erl2html2_SUITE). + +-compile(export_all). + +-include_lib("common_test/include/ct.hrl"). + + +-define(HEADER, + ["<!DOCTYPE HTML PUBLIC", + "\"-//W3C//DTD HTML 3.2 Final//EN\">\n", + "<!-- autogenerated by 'erl2html2' -->\n", + "<html>\n", + "<head><title>Module ", Src, "</title>\n", + "<meta http-equiv=\"cache-control\" ", + "content=\"no-cache\">\n", + "</head>\n", + "<body bgcolor=\"white\" text=\"black\" ", + "link=\"blue\" vlink=\"purple\" alink=\"red\">\n"]). + +%%-------------------------------------------------------------------- +%% @spec suite() -> Info +%% Info = [tuple()] +%% @end +%%-------------------------------------------------------------------- +suite() -> + [{timetrap,{seconds,30}}, + {ct_hooks,[ts_install_cth,test_server_test_lib]}]. + +%%-------------------------------------------------------------------- +%% @spec init_per_suite(Config0) -> +%% Config1 | {skip,Reason} | {skip_and_save,Reason,Config1} +%% Config0 = Config1 = [tuple()] +%% Reason = term() +%% @end +%%-------------------------------------------------------------------- +init_per_suite(Config) -> + Config. + +%%-------------------------------------------------------------------- +%% @spec end_per_suite(Config0) -> void() | {save_config,Config1} +%% Config0 = Config1 = [tuple()] +%% @end +%%-------------------------------------------------------------------- +end_per_suite(_Config) -> + ok. + +%%-------------------------------------------------------------------- +%% @spec init_per_group(GroupName, Config0) -> +%% Config1 | {skip,Reason} | {skip_and_save,Reason,Config1} +%% GroupName = atom() +%% Config0 = Config1 = [tuple()] +%% Reason = term() +%% @end +%%-------------------------------------------------------------------- +init_per_group(_GroupName, Config) -> + Config. + +%%-------------------------------------------------------------------- +%% @spec end_per_group(GroupName, Config0) -> +%% void() | {save_config,Config1} +%% GroupName = atom() +%% Config0 = Config1 = [tuple()] +%% @end +%%-------------------------------------------------------------------- +end_per_group(_GroupName, _Config) -> + ok. + +%%-------------------------------------------------------------------- +%% @spec init_per_testcase(TestCase, Config0) -> +%% Config1 | {skip,Reason} | {skip_and_save,Reason,Config1} +%% TestCase = atom() +%% Config0 = Config1 = [tuple()] +%% Reason = term() +%% @end +%%-------------------------------------------------------------------- +init_per_testcase(_TestCase, Config) -> + Config. + +%%-------------------------------------------------------------------- +%% @spec end_per_testcase(TestCase, Config0) -> +%% void() | {save_config,Config1} | {fail,Reason} +%% TestCase = atom() +%% Config0 = Config1 = [tuple()] +%% Reason = term() +%% @end +%%-------------------------------------------------------------------- +end_per_testcase(_TestCase, _Config) -> + ok. + +%%-------------------------------------------------------------------- +%% @spec groups() -> [Group] +%% Group = {GroupName,Properties,GroupsAndTestCases} +%% GroupName = atom() +%% Properties = [parallel | sequence | Shuffle | {RepeatType,N}] +%% GroupsAndTestCases = [Group | {group,GroupName} | TestCase] +%% TestCase = atom() +%% Shuffle = shuffle | {shuffle,{integer(),integer(),integer()}} +%% RepeatType = repeat | repeat_until_all_ok | repeat_until_all_fail | +%% repeat_until_any_ok | repeat_until_any_fail +%% N = integer() | forever +%% @end +%%-------------------------------------------------------------------- +groups() -> + []. + +%%-------------------------------------------------------------------- +%% @spec all() -> GroupsAndTestCases | {skip,Reason} +%% GroupsAndTestCases = [{group,GroupName} | TestCase] +%% GroupName = atom() +%% TestCase = atom() +%% Reason = term() +%% @end +%%-------------------------------------------------------------------- +all() -> + [m1]. + +%%-------------------------------------------------------------------- +%% @spec TestCase() -> Info +%% Info = [tuple()] +%% @end +%%-------------------------------------------------------------------- +m1() -> + []. + +%%-------------------------------------------------------------------- +%% @spec TestCase(Config0) -> +%% ok | exit() | {skip,Reason} | {comment,Comment} | +%% {save_config,Config1} | {skip_and_save,Reason,Config1} +%% Config0 = Config1 = [tuple()] +%% Reason = term() +%% Comment = term() +%% @end +%%-------------------------------------------------------------------- +m1(Config) -> + {Src,Dst} = convert_module("m1",Config), + {true,L} = check_line_numbers(Src,Dst), + ok = check_link_targets(Src,Dst,L,[{baz,0}]), + ok. + +convert_module(Mod,Config) -> + DataDir = ?config(data_dir,Config), + PrivDir = ?config(priv_dir,Config), + Src = filename:join(DataDir,Mod++".erl"), + Dst = filename:join(PrivDir,Mod++".erl.html"), + io:format("<a href=\"~s\">~s</a>\n",[Src,filename:basename(Src)]), + ok = erl2html2:convert(Src, Dst, "<html><body>"), + io:format("<a href=\"~s\">~s</a>\n",[Dst,filename:basename(Dst)]), + {Src,Dst}. + +%% Check that there are the same number of lines in each file, and +%% that all line numbers are displayed in the dst file. +check_line_numbers(Src,Dst) -> + {ok,SFd} = file:open(Src,[read]), + {ok,DFd} = file:open(Dst,[read]), + {ok,SN} = count_src_lines(SFd,0), + ok = file:close(SFd), + {ok,DN} = read_dst_line_numbers(DFd), + ok = file:close(DFd), + {SN == DN,SN}. + +count_src_lines(Fd,N) -> + case io:get_line(Fd,"") of + eof -> + {ok,N}; + {error,Reason} -> + {error,Reason,N}; + _Line -> + count_src_lines(Fd,N+1) + end. + +read_dst_line_numbers(Fd) -> + "<html><body><pre>\n" = io:get_line(Fd,""), + read_dst_line_numbers(Fd,0). +read_dst_line_numbers(Fd,Last) when is_integer(Last) -> + case io:get_line(Fd,"") of + eof -> + {ok,Last}; + {error,Reason} -> + {error,Reason,Last}; + "</pre>"++_ -> + {ok,Last}; + "</body>"++_ -> + {ok,Last}; + Line -> + %% erlang:display(Line), + Num = check_line_number(Last,Line,Line), + read_dst_line_numbers(Fd,Num) + end. + +check_line_number(Last,Line,OrigLine) -> + case Line of + "<a name="++_ -> + [$>|Rest] = lists:dropwhile(fun($>) -> false; (_) -> true end,Line), + check_line_number(Last,Rest,OrigLine); + _ -> + [N |_] = string:tokens(Line,":"), +% erlang:display(N), + Num = + try list_to_integer(string:strip(N)) + catch _:_ -> ct:fail({no_line_number_after,Last,OrigLine}) + end, + if Num == Last+1 -> + Num; + true -> + ct:fail({unexpected_integer,Num,Last}) + end + end. + + +%% Check that there is one link target for each line and one for each +%% function. +%% The test module has -compile(export_all), so all functions are +%% found by listing the exported ones. +check_link_targets(Src,Dst,L,RmFncs) -> + Mod = list_to_atom(filename:basename(filename:rootname(Src))), + Exports = Mod:module_info(exports)--[{module_info,0},{module_info,1}|RmFncs], + {ok,{[],L},_} = xmerl_sax_parser:file(Dst, + [{event_fun,fun sax_event/3}, + {event_state,{Exports,0}}]), + ok. + +sax_event(Event,_Loc,State) -> + sax_event(Event,State). + +sax_event({startElement,_Uri,"a",_QN,Attrs},{Exports,PrevLine}) -> + {_,_,"name",Name} = lists:keyfind("name",3,Attrs), + case catch list_to_integer(Name) of + Line when is_integer(Line) -> + case PrevLine + 1 of + Line -> +% erlang:display({found_line,Line}), + {Exports,Line}; + Other -> + ct:fail({unexpected_line_number_target,Other}) + end; + {'EXIT',_} -> + {match,[FStr,AStr]} = + re:run(Name,"^(.*)-([0-9]+)$",[{capture,all_but_first,list}]), + F = list_to_atom(http_uri:decode(FStr)), + A = list_to_integer(AStr), +% erlang:display({found_fnc,F,A}), + A = proplists:get_value(F,Exports), + {lists:delete({F,A},Exports),PrevLine} + end; +sax_event(_,State) -> + State. diff --git a/lib/test_server/test/erl2html2_SUITE_data/Makefile.src b/lib/test_server/test/erl2html2_SUITE_data/Makefile.src new file mode 100644 index 0000000000..942ac0584b --- /dev/null +++ b/lib/test_server/test/erl2html2_SUITE_data/Makefile.src @@ -0,0 +1,2 @@ +all: + erlc -Iinclude m1.erl
\ No newline at end of file diff --git a/lib/test_server/test/erl2html2_SUITE_data/header1.hrl b/lib/test_server/test/erl2html2_SUITE_data/header1.hrl new file mode 100644 index 0000000000..53d1b79ac5 --- /dev/null +++ b/lib/test_server/test/erl2html2_SUITE_data/header1.hrl @@ -0,0 +1,4 @@ +baz() -> + ok. + +-define(MACRO_DEFINING_A_FUNCTION,quux() -> ok). diff --git a/lib/test_server/test/erl2html2_SUITE_data/include/header2.hrl b/lib/test_server/test/erl2html2_SUITE_data/include/header2.hrl new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/lib/test_server/test/erl2html2_SUITE_data/include/header2.hrl diff --git a/lib/test_server/test/erl2html2_SUITE_data/m1.erl b/lib/test_server/test/erl2html2_SUITE_data/m1.erl new file mode 100644 index 0000000000..156f1d0a51 --- /dev/null +++ b/lib/test_server/test/erl2html2_SUITE_data/m1.erl @@ -0,0 +1,46 @@ +%% Comment with <html> code & </html> +%% and also some "quotes" and 'single quotes' + +-module(m1). + +-compile(export_all). + +-include("header1.hrl"). +-include("header2.hrl"). + +-define(MACRO1,value). + +%%% Comment +foo(x) -> + %% Comment + ok_x; +foo(y) -> + %% Second clause + ok_y. + +'quoted_foo'() -> + ok. + +'quoted_foo_with_"_and_/'() -> + ok. + +'quoted_foo_with_(_and_)'() -> + ok. + +'quoted_foo_with_<_and_>'() -> + ok. + +bar() -> + do_something(), +ok. % indentation error, OTP-9710 + +%% Function inside macro definition +?MACRO_DEFINING_A_FUNCTION. + +%% Two function one one line +quuux() -> ok. quuuux() -> ok. + +%% do_something/0 does something +do_something() -> + ?MACRO1. +%% comments after last line diff --git a/lib/test_server/test/test_server.cover b/lib/test_server/test/test_server.cover index c16212567e..052415377d 100644 --- a/lib/test_server/test/test_server.cover +++ b/lib/test_server/test/test_server.cover @@ -1,21 +1 @@ {incl_app,test_server,details}. - -{excl_mods, test_server, [test_server, - test_server_ctrl, - ts_selftest]}. - -%% Using incl_mods list here because the test_server might not find -%% lib_dir for test_server - and so it will not find which modules to -%% compile. -{incl_mods, test_server, [erl2html2, - test_server_node, - test_server_sup, - ts, - ts_autoconf_win32, - ts_erl_config, - ts_install, - ts_lib, - ts_make, - ts_run - ]}. - diff --git a/lib/test_server/test/test_server_SUITE.erl b/lib/test_server/test/test_server_SUITE.erl index d20528d43b..95a3423fef 100644 --- a/lib/test_server/test/test_server_SUITE.erl +++ b/lib/test_server/test/test_server_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2010-2011. All Rights Reserved. +%% Copyright Ericsson AB 2010-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -79,7 +79,8 @@ groups() -> all() -> [test_server_SUITE, test_server_parallel01_SUITE, test_server_conf02_SUITE, test_server_conf01_SUITE, - test_server_skip_SUITE, test_server_shuffle01_SUITE]. + test_server_skip_SUITE, test_server_shuffle01_SUITE, + test_server_break_SUITE]. %%-------------------------------------------------------------------- @@ -115,6 +116,10 @@ test_server_conf02_SUITE(Config) -> run_test_server_tests("test_server_conf02_SUITE", 26, 0, 12, 12, 0, 0, 0, 0, 26, Config). +test_server_break_SUITE(Config) -> + D = run_test_server_tests("test_server_break_SUITE", 8, 2, 6, + 4, 0, 0, 0, 2, 6, Config), + D. run_test_server_tests(SuiteName, NCases, NFail, NExpected, NSucc, NUsrSkip, NAutoSkip, @@ -139,9 +144,11 @@ run_test_server_tests(SuiteName, NCases, NFail, NExpected, NSucc, rpc:call(Node,test_server_ctrl, stop, []), {ok,Data} = test_server_test_lib:parse_suite( - hd(filelib:wildcard( - filename:join([WorkDir,SuiteName++".logs", - "run*","suite.log"])))), + lists:last( + lists:sort( + filelib:wildcard( + filename:join([WorkDir,SuiteName++".logs", + "run*","suite.log"]))))), check([{"Number of cases",NCases,Data#suite.n_cases}, {"Number failed",NFail,Data#suite.n_cases_failed}, {"Number expected",NExpected,Data#suite.n_cases_expected}, diff --git a/lib/test_server/test/test_server_SUITE_data/Makefile.src b/lib/test_server/test/test_server_SUITE_data/Makefile.src index 332b855df6..ec8ddd78b0 100644 --- a/lib/test_server/test/test_server_SUITE_data/Makefile.src +++ b/lib/test_server/test/test_server_SUITE_data/Makefile.src @@ -4,4 +4,5 @@ all: erlc test_server_conf01_SUITE.erl erlc test_server_shuffle01_SUITE.erl erlc test_server_conf02_SUITE.erl - erlc test_server_skip_SUITE.erl
\ No newline at end of file + erlc test_server_skip_SUITE.erl + erlc test_server_break_SUITE.erl
\ No newline at end of file diff --git a/lib/test_server/test/test_server_SUITE_data/test_server_SUITE.erl b/lib/test_server/test/test_server_SUITE_data/test_server_SUITE.erl index ab25e4ad2f..fc2adcd651 100644 --- a/lib/test_server/test/test_server_SUITE_data/test_server_SUITE.erl +++ b/lib/test_server/test/test_server_SUITE_data/test_server_SUITE.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 1997-2011. All Rights Reserved. +%% Copyright Ericsson AB 1997-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -433,7 +433,7 @@ start_stop_node(Config) when is_list(Config) -> ?t:comment("WARNING: Node started with {wait,false}" " is up faster than expected..."); false -> - wait_for_node(Node4,0), + test_server:wait_for_node(Node4), true = lists:member(Node4,nodes()) end, @@ -450,16 +450,6 @@ start_stop_node(Config) when is_list(Config) -> ok. - -wait_for_node(Node,Acc) -> - case net_adm:ping(Node) of - pang -> - timer:sleep(100), - wait_for_node(Node,Acc+100); - pong -> - Acc - end. - cleanup_nodes_init(doc) -> ["Test that nodes are terminated when test case" " is finished unless {cleanup,false} is given."]; cleanup_nodes_init(Config) when is_list(Config) -> diff --git a/lib/test_server/test/test_server_SUITE_data/test_server_break_SUITE.erl b/lib/test_server/test/test_server_SUITE_data/test_server_break_SUITE.erl new file mode 100644 index 0000000000..70e30a3334 --- /dev/null +++ b/lib/test_server/test/test_server_SUITE_data/test_server_break_SUITE.erl @@ -0,0 +1,148 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2012. All Rights Reserved. +%% +%% The contents of this file are subject to the Erlang Public License, +%% Version 1.1, (the "License"); you may not use this file except in +%% compliance with the License. You should have received a copy of the +%% Erlang Public License along with this software. If not, it can be +%% retrieved online at http://www.erlang.org/. +%% +%% Software distributed under the License is distributed on an "AS IS" +%% basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See +%% the License for the specific language governing rights and limitations +%% under the License. +%% +%% %CopyrightEnd% +%% +-module(test_server_break_SUITE). + +-export([all/1, init_per_suite/1, end_per_suite/1]). +-export([init_per_testcase/2, end_per_testcase/2]). +-export([break_in_init_tc/1, + break_in_tc/1, + break_in_end_tc/1, + break_in_end_tc_after_fail/1, + break_in_end_tc_after_abort/1, + check_all_breaks/1]). + +-include_lib("test_server/include/test_server.hrl"). + +all(suite) -> + [break_in_init_tc, + break_in_tc, + break_in_end_tc, + break_in_end_tc_after_fail, + break_in_end_tc_after_abort, + check_all_breaks]. %must be the last test - checks result of previous tests + +init_per_suite(Config) -> + spawn(fun break_and_continue_sup/0), + Config. + +end_per_suite(Config) -> + ok. + +init_per_testcase(Case,Config) when Case==break_in_init_tc -> + Config1 = init_timetrap(500,Config), + break_and_check(Case), + Config1; +init_per_testcase(Case,Config) when Case==check_all_breaks -> + init_timetrap({seconds,20},Config); +init_per_testcase(_Case,Config) -> + init_timetrap(500,Config). + +init_timetrap(T,Config) -> + Dog = ?t:timetrap(T), + [{watchdog, Dog}|Config]. + +end_per_testcase(Case,Config) when Case==break_in_end_tc; + Case==break_in_end_tc_after_fail; + Case==break_in_end_tc_after_abort -> + break_and_check(Case), + cancel_timetrap(Config); +end_per_testcase(_Case,Config) -> + cancel_timetrap(Config). + +cancel_timetrap(Config) -> + Dog=?config(watchdog, Config), + ?t:timetrap_cancel(Dog), + ok. + + +%%%----------------------------------------------------------------- +%%% Test cases + +break_in_init_tc(Config) when is_list(Config) -> + ok. + +break_in_tc(Config) when is_list(Config) -> + break_and_check(break_in_tc), + ok. + +break_in_end_tc(Config) when is_list(Config) -> + ok. + +break_in_end_tc_after_fail(Config) when is_list(Config) -> + ?t:fail(test_case_should_fail). + +break_in_end_tc_after_abort(Config) when is_list(Config) -> + ?t:adjusted_sleep(2000). % will cause a timetrap timeout + +%%%----------------------------------------------------------------- +%%% Internal functions + +%% This test case checks that all breaks in previous test cases was +%% also continued, and that the break lasted as long as expected. +%% The reason for this is that some of the breaks above are in +%% end_per_testcase, and failures there will only produce a warning, +%% not an error - so this is to catch the error for real. +check_all_breaks(Config) -> + break_and_continue_sup ! {done,self()}, + receive {Breaks,Continued} -> + check_all_breaks(Breaks,Continued) + end. + +check_all_breaks([{From,Case,T,Start}|Breaks],[{From,End}|Continued]) -> + Diff = timer:now_diff(End,Start), + DiffSec = round(Diff/1000000), + TSec = round(T/1000000), + if DiffSec==TSec -> + ?t:format("Break in ~p successfully continued after ~p second(s)~n", + [Case,DiffSec]), + check_all_breaks(Breaks,Continued); + true -> + ?t:format("Faulty duration of break in ~p: continued after ~p second(s)~n", + [Case,DiffSec]), + ?t:fail({faulty_diff,Case,DiffSec,TSec}) + end; +check_all_breaks([],[]) -> + ok; +check_all_breaks(Breaks,Continued) -> + %% This is probably a case of a missing continue - i.e. a break + %% has been started, but it was never continued. + ?t:fail({no_match_in_breaks_and_continued,Breaks,Continued}). + +break_and_check(Case) -> + break_and_continue_sup ! {break,Case,1000,self()}, + ?t:break(atom_to_list(Case)), + break_and_continue_sup ! {continued,self()}, + ok. + +break_and_continue_sup() -> + register(break_and_continue_sup,self()), + break_and_continue_loop([],[]). + +break_and_continue_loop(Breaks,Continued) -> + receive + {break,Case,T,From} -> + Start = now(), + {RealT,_} = timer:tc(?t,adjusted_sleep,[T]), + ?t:continue(), + break_and_continue_loop([{From,Case,RealT,Start}|Breaks],Continued); + {continued,From} -> + break_and_continue_loop(Breaks,[{From,now()}|Continued]); + {done,From} -> + From ! {lists:reverse(Breaks),lists:reverse(Continued)} + end. diff --git a/lib/test_server/test/test_server_test_lib.erl b/lib/test_server/test/test_server_test_lib.erl index 8a808c5360..4e89abf308 100644 --- a/lib/test_server/test/test_server_test_lib.erl +++ b/lib/test_server/test/test_server_test_lib.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2009-2011. All Rights Reserved. +%% Copyright Ericsson AB 2009-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -83,7 +83,12 @@ start_slave(Config,_Level) -> post_end_per_testcase(_TC, Config, Return, State) -> Node = proplists:get_value(node, Config), - cover:stop(Node), + case test_server:is_cover() of + true -> + cover:flush(Node); + false -> + ok + end, slave:stop(Node), {Return, State}. diff --git a/lib/test_server/vsn.mk b/lib/test_server/vsn.mk index aecf595f3f..b956ebb2b3 100644 --- a/lib/test_server/vsn.mk +++ b/lib/test_server/vsn.mk @@ -1 +1 @@ -TEST_SERVER_VSN = 3.5.2 +TEST_SERVER_VSN = 3.5.3 diff --git a/lib/tools/doc/src/cover.xml b/lib/tools/doc/src/cover.xml index 683acc025d..a2444ec947 100644 --- a/lib/tools/doc/src/cover.xml +++ b/lib/tools/doc/src/cover.xml @@ -5,7 +5,7 @@ <header> <copyright> <year>2001</year> - <year>2011</year> + <year>2012</year> <holder>Ericsson AB, All Rights Reserved</holder> </copyright> <legalnotice> @@ -104,6 +104,13 @@ remove nodes. The same Cover compiled code will be loaded on each node, and analysis will collect and sum up coverage data results from all nodes.</p> + <p>To only collect data from remote nodes without stopping + <c>cover</c> on those nodes, use <c>cover:flush/1</c></p> + <p>If the connection to a remote node goes down, the main node + will mark it as lost. If the node comes back it will be added + again. If the remote node was alive during the disconnected + periode, cover data from before and during this periode will be + included in the analysis.</p> </description> <funcs> <func> @@ -477,6 +484,17 @@ remote nodes is fetched and stored on the main node.</p> </desc> </func> + <func> + <name>flush(Nodes) -> ok | {error,not_main_node}</name> + <fsummary>Collect cover data from remote nodes.</fsummary> + <type> + <v>Nodes = [atom()]</v> + </type> + <desc> + <p>Fetch data from the Cover database on the remote nodes and + stored on the main node.</p> + </desc> + </func> </funcs> <section> diff --git a/lib/tools/doc/src/xref.xml b/lib/tools/doc/src/xref.xml index 17de66bb22..9706ae6746 100644 --- a/lib/tools/doc/src/xref.xml +++ b/lib/tools/doc/src/xref.xml @@ -1453,7 +1453,7 @@ Evaluates a predefined analysis. Note however that the code path will be traversed once for each used <seealso marker="#library_module">library module</seealso> while setting up module data. On the other hand, if there are only a few modules that are - used by not analyzed, using <c>code_path</c> may be faster + used but not analyzed, using <c>code_path</c> may be faster than setting the library path to <c>code:get_path()</c>. </p> <p>If the library path is set to <c>code_path</c>, the set of diff --git a/lib/tools/emacs/erlang.el b/lib/tools/emacs/erlang.el index e2bcd37def..2967acf310 100644 --- a/lib/tools/emacs/erlang.el +++ b/lib/tools/emacs/erlang.el @@ -997,6 +997,22 @@ behaviour.") 1 'font-lock-function-name-face t)) "Font lock keyword highlighting a function header.") +(defface erlang-font-lock-exported-function-name-face + '((default (:inherit font-lock-function-name-face))) + "Face used for highlighting exported functions.") + +(defvar erlang-font-lock-exported-function-name-face + 'erlang-font-lock-exported-function-name-face) + +(defvar erlang-inhibit-exported-function-name-face nil + "Inhibit separate face for exported functions") + +(defvar erlang-font-lock-keywords-exported-function-header + (list + (list #'erlang-match-next-exported-function + 1 'erlang-font-lock-exported-function-name-face t)) + "Font lock keyword highlighting an exported function header.") + (defvar erlang-font-lock-keywords-int-bifs (list (list (concat erlang-int-bif-regexp "\\s-*(") @@ -1132,7 +1148,8 @@ There exists three levels of Font Lock keywords for Erlang: `erlang-font-lock-keywords-1' - Function headers and reserved keywords. `erlang-font-lock-keywords-2' - Bifs, guards and `single quotes'. `erlang-font-lock-keywords-3' - Variables, macros and records. - `erlang-font-lock-keywords-4' - Function names, Funs, LCs (not Atoms) + `erlang-font-lock-keywords-4' - Exported functions, Function names, + Funs, LCs (not Atoms). To use a specific level, please set the variable `font-lock-maximum-decoration' to the appropriate level. Note that the @@ -1174,6 +1191,7 @@ Example: (defvar erlang-font-lock-keywords-4 (append erlang-font-lock-keywords-3 + erlang-font-lock-keywords-exported-function-header erlang-font-lock-keywords-int-function-calls erlang-font-lock-keywords-ext-function-calls erlang-font-lock-keywords-fun-n @@ -3662,6 +3680,38 @@ In the future the list may contain more elements." str) (store-match-data md)))) +(defun erlang-match-next-exported-function (max) + "Returns non-nil if there is an exported function in the current +buffer between point and MAX." + (block nil + (while (and (not erlang-inhibit-exported-function-name-face) + (erlang-match-next-function max)) + (when (erlang-last-match-exported-p) + (return (match-data)))))) + +(defun erlang-match-next-function (max) + "Searches forward in current buffer for the next erlang function, +bounded by position MAX." + (re-search-forward erlang-defun-prompt-regexp max 'move-point)) + +(defun erlang-last-match-exported-p () + "Returns non-nil if match-data describes the name and arity of an +exported function." + (save-excursion + (save-match-data + (goto-char (match-beginning 1)) + (erlang-function-exported-p + (erlang-remove-quotes (erlang-get-function-name)) + (erlang-get-function-arity))))) + +(defun erlang-function-exported-p (name arity) + "Returns non-nil if function of name and arity is exported in current buffer." + (save-excursion + (let* ((old-match-data (match-data)) + (exports (erlang-get-export))) + (store-match-data old-match-data) + (member (cons name arity) exports)))) + ;;; Check module name diff --git a/lib/tools/src/cover.erl b/lib/tools/src/cover.erl index e21bd1b88c..10f14b0a49 100644 --- a/lib/tools/src/cover.erl +++ b/lib/tools/src/cover.erl @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 2001-2011. All Rights Reserved. +%% Copyright Ericsson AB 2001-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in @@ -26,12 +26,17 @@ %% ARCHITECTURE %% The coverage tool consists of one process on each node involved in %% coverage analysis. The process is registered as 'cover_server' -%% (?SERVER). All cover_servers in the distributed system are linked -%% together. The cover_server on the 'main' node is in charge, and it -%% traps exits so it can detect nodedown or process crashes on the -%% remote nodes. This process is implemented by the functions -%% init_main/1 and main_process_loop/1. The cover_server on the remote -%% nodes are implemented by the functions init_remote/2 and +%% (?SERVER). The cover_server on the 'main' node is in charge, and +%% it monitors the cover_servers on all remote nodes. When it gets a +%% 'DOWN' message for another cover_server, it marks the node as +%% 'lost'. If a nodeup is received for a lost node the main node +%% ensures that the cover compiled modules are loaded again. If the +%% remote node was alive during the disconnected periode, cover data +%% for this periode will also be included in the analysis. +%% +%% The cover_server process on the main node is implemented by the +%% functions init_main/1 and main_process_loop/1. The cover_server on +%% the remote nodes are implemented by the functions init_remote/2 and %% remote_process_loop/1. %% %% TABLES @@ -81,15 +86,17 @@ export/1, export/2, import/1, modules/0, imported/0, imported_modules/0, which_nodes/0, is_compiled/1, reset/1, reset/0, + flush/1, stop/0, stop/1]). --export([remote_start/1]). +-export([remote_start/1,get_main_node/0]). %-export([bump/5]). -export([transform/4]). % for test purposes -record(main_state, {compiled=[], % [{Module,File}] imported=[], % [{Module,File,ImportFile}] stopper, % undefined | pid() - nodes=[]}). % [Node] + nodes=[], % [Node] + lost_nodes=[]}). % [Node] -record(remote_state, {compiled=[], % [{Module,File}] main_node}). % atom() @@ -497,6 +504,19 @@ stop(Node) when is_atom(Node) -> stop(Nodes) -> call({stop,remove_myself(Nodes,[])}). +%% flush(Nodes) -> ok | {error,not_main_node} +%% Nodes = [Node] | Node +%% Node = atom() +%% Error = {not_cover_compiled,Module} +flush(Node) when is_atom(Node) -> + flush([Node]); +flush(Nodes) -> + call({flush,remove_myself(Nodes,[])}). + +%% Used by test_server only. Not documented. +get_main_node() -> + call(get_main_node). + %% bump(Module, Function, Arity, Clause, Line) %% Module = Function = atom() %% Arity = Clause = Line = integer() @@ -541,7 +561,10 @@ remote_call(Node,Request) -> Return = receive {'DOWN', Ref, _Type, _Object, _Info} -> - {error,node_dead}; + case Request of + {remote,stop} -> ok; + _ -> {error,node_dead} + end; {?SERVER,Reply} -> Reply end, @@ -569,40 +592,14 @@ init_main(Starter) -> ets:new(?BINARY_TABLE, [set, named_table]), ets:new(?COLLECTION_TABLE, [set, public, named_table]), ets:new(?COLLECTION_CLAUSE_TABLE, [set, public, named_table]), - process_flag(trap_exit,true), + net_kernel:monitor_nodes(true), Starter ! {?SERVER,started}, main_process_loop(#main_state{}). main_process_loop(State) -> receive {From, {start_nodes,Nodes}} -> - ThisNode = node(), - StartedNodes = - lists:foldl( - fun(Node,Acc) -> - case rpc:call(Node,cover,remote_start,[ThisNode]) of - {ok,RPid} -> - link(RPid), - [Node|Acc]; - Error -> - io:format("Could not start cover on ~w: ~p\n", - [Node,Error]), - Acc - end - end, - [], - Nodes), - - %% In case some of the compiled modules have been unloaded they - %% should not be loaded on the new node. - {_LoadedModules,Compiled} = - get_compiled_still_loaded(State#main_state.nodes, - State#main_state.compiled), - remote_load_compiled(StartedNodes,Compiled), - - State1 = - State#main_state{nodes = State#main_state.nodes ++ StartedNodes, - compiled = Compiled}, + {StartedNodes,State1} = do_start_nodes(Nodes, State), reply(From, {ok,StartedNodes}), main_process_loop(State1); @@ -707,8 +704,13 @@ main_process_loop(State) -> {From, {stop,Nodes}} -> remote_collect('_',Nodes,true), reply(From, ok), - State1 = State#main_state{nodes=State#main_state.nodes--Nodes}, - main_process_loop(State1); + Nodes1 = State#main_state.nodes--Nodes, + main_process_loop(State#main_state{nodes=Nodes1}); + + {From, {flush,Nodes}} -> + remote_collect('_',Nodes,false), + reply(From, ok), + main_process_loop(State); {From, stop} -> lists:foreach( @@ -788,14 +790,30 @@ main_process_loop(State) -> end, main_process_loop(S); - {'EXIT',Pid,_Reason} -> - %% Exit is trapped on the main node only, so this will only happen - %% there. I assume that I'm only linked to cover_servers on remote - %% nodes, so this must be one of them crashing. - %% Remove node from list! - State1 = State#main_state{nodes=State#main_state.nodes--[node(Pid)]}, + {'DOWN', _MRef, process, {?SERVER,Node}, _Info} -> + %% A remote cover_server is down, mark as lost + Nodes = State#main_state.nodes--[Node], + Lost = [Node|State#main_state.lost_nodes], + main_process_loop(State#main_state{nodes=Nodes,lost_nodes=Lost}); + + {nodeup,Node} -> + State1 = + case lists:member(Node,State#main_state.lost_nodes) of + true -> + sync_compiled(Node,State); + false -> + State + end, main_process_loop(State1); + + {nodedown,_} -> + %% Will be taken care of when 'DOWN' message arrives + main_process_loop(State); + {From, get_main_node} -> + reply(From, node()), + main_process_loop(State); + get_status -> io:format("~p~n",[State]), main_process_loop(State) @@ -850,7 +868,16 @@ remote_process_loop(State) -> {remote,stop} -> reload_originals(State#remote_state.compiled), unregister(?SERVER), - remote_reply(State#remote_state.main_node, ok); + ok; % not replying since 'DOWN' message will be received anyway + + {remote,get_compiled} -> + remote_reply(State#remote_state.main_node, + State#remote_state.compiled), + remote_process_loop(State); + + {From, get_main_node} -> + remote_reply(From, State#remote_state.main_node), + remote_process_loop(State); get_status -> io:format("~p~n",[State]), @@ -961,6 +988,36 @@ unload([]) -> %%%--Handling of remote nodes-------------------------------------------- +do_start_nodes(Nodes, State) -> + ThisNode = node(), + StartedNodes = + lists:foldl( + fun(Node,Acc) -> + case rpc:call(Node,cover,remote_start,[ThisNode]) of + {ok,_RPid} -> + erlang:monitor(process,{?SERVER,Node}), + [Node|Acc]; + Error -> + io:format("Could not start cover on ~w: ~p\n", + [Node,Error]), + Acc + end + end, + [], + Nodes), + + %% In case some of the compiled modules have been unloaded they + %% should not be loaded on the new node. + {_LoadedModules,Compiled} = + get_compiled_still_loaded(State#main_state.nodes, + State#main_state.compiled), + remote_load_compiled(StartedNodes,Compiled), + + State1 = + State#main_state{nodes = State#main_state.nodes ++ StartedNodes, + compiled = Compiled}, + {StartedNodes, State1}. + %% start the cover_server on a remote node remote_start(MainNode) -> case whereis(?SERVER) of @@ -984,6 +1041,30 @@ remote_start(MainNode) -> {error,{already_started,Pid}} end. +%% If a lost node comes back, ensure that main and remote node has the +%% same cover compiled modules. Note that no action is taken if the +%% same {Mod,File} eksists on both, i.e. code change is not handled! +sync_compiled(Node,State) -> + #main_state{compiled=Compiled0,nodes=Nodes,lost_nodes=Lost}=State, + State1 = + case remote_call(Node,{remote,get_compiled}) of + {error,node_dead} -> + {_,S} = do_start_nodes([Node],State), + S; + {error,_} -> + State; + RemoteCompiled -> + {_,Compiled} = get_compiled_still_loaded(Nodes,Compiled0), + Unload = [UM || {UM,_}=U <- RemoteCompiled, + false == lists:member(U,Compiled)], + remote_unload([Node],Unload), + Load = [L || L <- Compiled, + false == lists:member(L,RemoteCompiled)], + remote_load_compiled([Node],Load), + State#main_state{compiled=Compiled, nodes=[Node|Nodes]} + end, + State1#main_state{lost_nodes=Lost--[Node]}. + %% Load a set of cover compiled modules on remote nodes, %% We do it ?MAX_MODS modules at a time so that we don't %% run out of memory on the cover_server node. @@ -1094,7 +1175,6 @@ remove_myself([Node|Nodes],Acc) -> remove_myself(Nodes,[Node|Acc]); remove_myself([],Acc) -> Acc. - %%%--Handling of modules state data-------------------------------------- @@ -2254,7 +2334,13 @@ do_reset2([]) -> do_clear(Module) -> ets:match_delete(?COVER_CLAUSE_TABLE, {Module,'_'}), ets:match_delete(?COVER_TABLE, {#bump{module=Module},'_'}), - ets:match_delete(?COLLECTION_TABLE, {#bump{module=Module},'_'}). + case lists:member(?COLLECTION_TABLE, ets:all()) of + true -> + %% We're on the main node + ets:match_delete(?COLLECTION_TABLE, {#bump{module=Module},'_'}); + false -> + ok + end. not_loaded(Module, unloaded, State) -> do_clear(Module), @@ -2307,7 +2393,7 @@ pmap(Fun, [E | Rest], Pids, Limit, Cnt, Acc) when Cnt < Limit -> pmap(Fun, Rest, Pids ++ [Pid], Limit, Cnt + 1, Acc); pmap(Fun, List, [Pid | Pids], Limit, Cnt, Acc) -> receive - {'DOWN', _Ref, process, _, _} -> + {'DOWN', _Ref, process, X, _} when is_pid(X) -> pmap(Fun, List, [Pid | Pids], Limit, Cnt - 1, Acc); {res, Pid, Res} -> pmap(Fun, List, Pids, Limit, Cnt, [Res | Acc]) @@ -2316,6 +2402,6 @@ pmap(_Fun, [], [], _Limit, 0, Acc) -> lists:reverse(Acc); pmap(Fun, [], [], Limit, Cnt, Acc) -> receive - {'DOWN', _Ref, process, _, _} -> + {'DOWN', _Ref, process, X, _} when is_pid(X) -> pmap(Fun, [], [], Limit, Cnt - 1, Acc) end. diff --git a/lib/tools/src/tools.app.src b/lib/tools/src/tools.app.src index 94998fb763..553c5eb96b 100644 --- a/lib/tools/src/tools.app.src +++ b/lib/tools/src/tools.app.src @@ -1,7 +1,7 @@ %% %% %CopyrightBegin% %% -%% Copyright Ericsson AB 1996-2009. All Rights Reserved. +%% Copyright Ericsson AB 1996-2012. All Rights Reserved. %% %% The contents of this file are subject to the Erlang Public License, %% Version 1.1, (the "License"); you may not use this file except in diff --git a/lib/tools/test/cover_SUITE.erl b/lib/tools/test/cover_SUITE.erl index c2c708d806..3bf1b44af8 100644 --- a/lib/tools/test/cover_SUITE.erl +++ b/lib/tools/test/cover_SUITE.erl @@ -23,7 +23,7 @@ init_per_group/2,end_per_group/2]). -export([start/1, compile/1, analyse/1, misc/1, stop/1, - distribution/1, export_import/1, + distribution/1, reconnect/1, die_and_reconnect/1, export_import/1, otp_5031/1, eif/1, otp_5305/1, otp_5418/1, otp_6115/1, otp_7095/1, otp_8188/1, otp_8270/1, otp_8273/1, otp_8340/1]). @@ -45,7 +45,8 @@ suite() -> [{ct_hooks,[ts_install_cth]}]. all() -> case whereis(cover_server) of undefined -> - [start, compile, analyse, misc, stop, distribution, + [start, compile, analyse, misc, stop, + distribution, reconnect, die_and_reconnect, export_import, otp_5031, eif, otp_5305, otp_5418, otp_6115, otp_7095, otp_8188, otp_8270, otp_8273, otp_8340]; @@ -326,14 +327,16 @@ distribution(Config) when is_list(Config) -> ?line {ok,N1} = ?t:start_node(cover_SUITE_distribution1,slave,[]), ?line {ok,N2} = ?t:start_node(cover_SUITE_distribution2,slave,[]), ?line {ok,N3} = ?t:start_node(cover_SUITE_distribution3,slave,[]), + ?line {ok,N4} = ?t:start_node(cover_SUITE_distribution4,slave,[]), %% Check that an already compiled module is loaded on new nodes ?line {ok,f} = cover:compile(f), - ?line {ok,[_,_,_]} = cover:start(nodes()), + ?line {ok,[_,_,_,_]} = cover:start(nodes()), ?line cover_compiled = code:which(f), ?line cover_compiled = rpc:call(N1,code,which,[f]), ?line cover_compiled = rpc:call(N2,code,which,[f]), ?line cover_compiled = rpc:call(N3,code,which,[f]), + ?line cover_compiled = rpc:call(N4,code,which,[f]), %% Check that a node cannot be started twice ?line {ok,[]} = cover:start(N2), @@ -351,6 +354,7 @@ distribution(Config) when is_list(Config) -> ?line cover_compiled = rpc:call(N1,code,which,[v]), ?line cover_compiled = rpc:call(N2,code,which,[v]), ?line cover_compiled = rpc:call(N3,code,which,[v]), + ?line cover_compiled = rpc:call(N4,code,which,[v]), %% this is lost when the node is killed ?line rpc:call(N3,f,f2,[]), @@ -385,6 +389,18 @@ distribution(Config) when is_list(Config) -> %% reset on the remote node(s)) ?line check_f_calls(1,1), + %% Another checn that data is not fetched twice, i.e. when flushed + %% then analyse should not add the same data again. + ?line rpc:call(N4,f,f2,[]), + ?line ok = cover:flush(N4), + ?line check_f_calls(1,2), + + %% Check that flush collects data so calls are not lost if node is killed + ?line rpc:call(N4,f,f2,[]), + ?line ok = cover:flush(N4), + ?line rpc:call(N4,erlang,halt,[]), + ?line check_f_calls(1,3), + %% Check that stop() unloads on all nodes ?line ok = cover:stop(), ?line timer:sleep(100), %% Give nodes time to unload on slow machines. @@ -393,20 +409,117 @@ distribution(Config) when is_list(Config) -> ?line true = is_unloaded(LocalBeam), ?line true = is_unloaded(N2Beam), - %% Check that cover_server on remote node dies if main node dies + %% Check that cover_server on remote node does not die if main node dies ?line {ok,[N1]} = cover:start(N1), - ?line true = is_pid(rpc:call(N1,erlang,whereis,[cover_server])), + ?line true = is_pid(N1Server = rpc:call(N1,erlang,whereis,[cover_server])), ?line exit(whereis(cover_server),kill), - ?line timer:sleep(10), - ?line undefined = rpc:call(N1,erlang,whereis,[cover_server]), - + ?line timer:sleep(100), + ?line N1Server = rpc:call(N1,erlang,whereis,[cover_server]), + %% Cleanup ?line Files = lsfiles(), ?line remove(files(Files, ".beam")), ?line ?t:stop_node(N1), ?line ?t:stop_node(N2). - +%% Test that a lost node is reconnected +reconnect(Config) -> + DataDir = ?config(data_dir, Config), + ok = file:set_cwd(DataDir), + + {ok,a} = compile:file(a), + {ok,b} = compile:file(b), + {ok,f} = compile:file(f), + + {ok,N1} = ?t:start_node(cover_SUITE_reconnect,peer, + [{args," -pa " ++ DataDir},{start_cover,false}]), + {ok,a} = cover:compile(a), + {ok,f} = cover:compile(f), + {ok,[N1]} = cover:start(nodes()), + + %% Some calls to check later + rpc:call(N1,f,f1,[]), + cover:flush(N1), + rpc:call(N1,f,f1,[]), + + %% This will cause a call to f:f2() when nodes()==[] on N1 + rpc:cast(N1,f,call_f2_when_isolated,[]), + + %% Disconnect and check that node is removed from main cover node + net_kernel:disconnect(N1), + [] = cover:which_nodes(), + timer:sleep(500), % allow some time for the f:f2() call + + %% Do some add one module (b) and remove one module (a) + code:purge(a), + {module,a} = code:load_file(a), + {ok,b} = cover:compile(b), + cover_compiled = code:which(b), + + [] = cover:which_nodes(), + check_f_calls(1,0), % only the first call - before the flush + + %% Reconnect the node and check that b and f are cover compiled but not a + net_kernel:connect_node(N1), + timer:sleep(100), + [N1] = cover:which_nodes(), % we are reconnected + cover_compiled = rpc:call(N1,code,which,[b]), + cover_compiled = rpc:call(N1,code,which,[f]), + ABeam = rpc:call(N1,code,which,[a]), + false = (cover_compiled==ABeam), + + %% Ensure that we have: + %% * one f1 call from before the flush, + %% * one f1 call from after the flush but before disconnect + %% * one f2 call when disconnected + check_f_calls(2,1), + + cover:stop(), + ?t:stop_node(N1), + ok. + +%% Test that a lost node is reconnected - also if it has been dead +die_and_reconnect(Config) -> + DataDir = ?config(data_dir, Config), + ok = file:set_cwd(DataDir), + + {ok,f} = compile:file(f), + + NodeName = cover_SUITE_die_and_reconnect, + {ok,N1} = ?t:start_node(NodeName,peer, + [{args," -pa " ++ DataDir},{start_cover,false}]), + %% {ok,a} = cover:compile(a), + {ok,f} = cover:compile(f), + {ok,[N1]} = cover:start(nodes()), + + %% Some calls to check later + rpc:call(N1,f,f1,[]), + cover:flush(N1), + rpc:call(N1,f,f1,[]), + + %% Kill the node + rpc:call(N1,erlang,halt,[]), + [] = cover:which_nodes(), + + check_f_calls(1,0), % only the first call - before the flush + + %% Restart the node and check that cover reconnects + {ok,N1} = ?t:start_node(NodeName,peer, + [{args," -pa " ++ DataDir},{start_cover,false}]), + timer:sleep(100), + [N1] = cover:which_nodes(), % we are reconnected + cover_compiled = rpc:call(N1,code,which,[f]), + + %% One more call... + rpc:call(N1,f,f1,[]), + + %% Ensure that no more calls are counted + check_f_calls(2,0), + + cover:stop(), + ?t:stop_node(N1), + ok. + export_import(suite) -> []; export_import(Config) when is_list(Config) -> ?line DataDir = ?config(data_dir, Config), @@ -1238,4 +1351,4 @@ is_unloaded(What) -> end. check_f_calls(F1,F2) -> - {ok,[{{f,f1,0},F1},{{f,f2,0},F2}]} = cover:analyse(f,calls,function). + {ok,[{{f,f1,0},F1},{{f,f2,0},F2}|_]} = cover:analyse(f,calls,function). diff --git a/lib/tools/test/cover_SUITE_data/f.erl b/lib/tools/test/cover_SUITE_data/f.erl index 1ef8bbdb49..ce2963014a 100644 --- a/lib/tools/test/cover_SUITE_data/f.erl +++ b/lib/tools/test/cover_SUITE_data/f.erl @@ -1,5 +1,5 @@ -module(f). --export([f1/0,f2/0]). +-export([f1/0,f2/0,call_f2_when_isolated/0]). f1() -> f1_line1, @@ -8,3 +8,12 @@ f1() -> f2() -> f2_line1, f2_line2. + +call_f2_when_isolated() -> + case nodes() of + [] -> + f2(); + _ -> + timer:sleep(100), + call_f2_when_isolated() + end. diff --git a/lib/wx/aclocal.m4 b/lib/wx/aclocal.m4 index b1cf1fe404..9578cd35c4 100644 --- a/lib/wx/aclocal.m4 +++ b/lib/wx/aclocal.m4 @@ -740,11 +740,16 @@ dnl Try to find POSIX threads dnl The usual pthread lib... AC_CHECK_LIB(pthread, pthread_create, THR_LIBS="-lpthread") -dnl FreeBSD has pthreads in special c library, c_r... +dnl Very old versions of FreeBSD have pthreads in special c library, c_r... if test "x$THR_LIBS" = "x"; then AC_CHECK_LIB(c_r, pthread_create, THR_LIBS="-lc_r") fi +dnl QNX has pthreads in standard C library + if test "x$THR_LIBS" = "x"; then + AC_CHECK_FUNC(pthread_create, THR_LIBS="none_needed") + fi + dnl On ofs1 the '-pthread' switch should be used if test "x$THR_LIBS" = "x"; then AC_MSG_CHECKING([if the '-pthread' switch can be used]) @@ -765,6 +770,9 @@ dnl On ofs1 the '-pthread' switch should be used if test "x$THR_LIBS" != "x"; then THR_DEFS="$THR_DEFS -D_THREAD_SAFE -D_REENTRANT -DPOSIX_THREADS" THR_LIB_NAME=pthread + if test "x$THR_LIBS" = "xnone_needed"; then + THR_LIBS= + fi case $host_os in solaris*) THR_DEFS="$THR_DEFS -D_POSIX_PTHREAD_SEMANTICS" ;; diff --git a/lib/wx/src/wx.erl b/lib/wx/src/wx.erl index 7d62305048..2a4b18d101 100644 --- a/lib/wx/src/wx.erl +++ b/lib/wx/src/wx.erl @@ -102,12 +102,18 @@ new() -> %% @doc Starts a wx server. %% Option may be {debug, Level}, see debug/1. --spec new([Option]) -> wx_object() when Option :: {debug, list() | atom()}. +%% Or {silent_start, Bool}, which causes error messages at startup to +%% be suppressed. The latter can be used as a silent test of whether +%% wx is properly installed or not. +-spec new([Option]) -> wx_object() when Option :: {debug, list() | atom()} | + {silent_start, boolean()}. new(Options) when is_list(Options) -> - #wx_env{port=Port} = wxe_server:start(), - put(opengl_port, Port), Debug = proplists:get_value(debug, Options, 0), - debug(Debug), + SilentStart = proplists:get_value(silent_start, Options, false), + Level = calc_level(Debug), + #wx_env{port=Port} = wxe_server:start(SilentStart andalso Level =:= 0), + put(opengl_port, Port), + set_debug(Level), null(). %% @doc Stops a wx server. @@ -282,13 +288,16 @@ release_memory(Bin) when is_binary(Bin) -> -spec debug(Level | [Level]) -> ok when Level :: none | verbose | trace | driver | integer(). -debug(none) -> debug(0); -debug(verbose) -> debug(1); -debug(trace) -> debug(2); -debug(driver) -> debug(16); -debug([]) -> debug(0); +debug(Debug) -> + Level = calc_level(Debug), + set_debug(Level). -debug(List) when is_list(List) -> +calc_level(none) -> calc_level(0); +calc_level(verbose) -> calc_level(1); +calc_level(trace) -> calc_level(2); +calc_level(driver) -> calc_level(16); +calc_level([]) -> calc_level(0); +calc_level(List) when is_list(List) -> {Drv,Erl} = lists:foldl(fun(verbose, {Drv,_Erl}) -> {Drv,1}; @@ -297,8 +306,11 @@ debug(List) when is_list(List) -> (driver, {_Drv,Erl}) -> {16, Erl} end, {0,0}, List), - debug(Drv + Erl); -debug(Level) when is_integer(Level) -> + Drv + Erl; +calc_level(Level) when is_integer(Level) -> + Level. + +set_debug(Level) when is_integer(Level) -> case get(?WXE_IDENTIFIER) of undefined -> erlang:error({wxe,unknown_port}); #wx_env{debug=Old} when Old =:= Level -> ok; diff --git a/lib/wx/src/wxe_master.erl b/lib/wx/src/wxe_master.erl index ac6e4a56e6..b98a7c793e 100644 --- a/lib/wx/src/wxe_master.erl +++ b/lib/wx/src/wxe_master.erl @@ -28,7 +28,7 @@ -behaviour(gen_server). %% API --export([start/0, init_port/0, init_opengl/0]). +-export([start/1, init_port/1, init_opengl/0]). %% gen_server callbacks -export([init/1, handle_call/3, handle_cast/2, handle_info/2, @@ -47,20 +47,20 @@ %% API %%==================================================================== %%-------------------------------------------------------------------- -%% Function: start_link() -> {ok,Pid} | ignore | {error,Error} +%% Function: start(SilentStart) -> {ok,Pid} | ignore | {error,Error} %% Description: Starts the server %%-------------------------------------------------------------------- -start() -> - gen_server:start({local, ?MODULE}, ?MODULE, [], []). +start(SilentStart) -> + gen_server:start({local, ?MODULE}, ?MODULE, [SilentStart], []). %%-------------------------------------------------------------------- -%% Function: init_port() -> {UserPort,CallBackPort} | error(Error) +%% Function: init_port(SilentStart) -> {UserPort,CallBackPort} | error(Error) %% Description: Creates the port %%-------------------------------------------------------------------- -init_port() -> +init_port(SilentStart) -> case whereis(?MODULE) of undefined -> - case start() of + case start(SilentStart) of {ok,Pid} -> Pid; {error,{already_started,Pid}} -> Pid; {error, {Reason,Stack}} -> @@ -93,14 +93,17 @@ init_opengl() -> %% {stop, Reason} %% Description: Initiates the server %%-------------------------------------------------------------------- -init([]) -> +init([SilentStart]) -> DriverName = ?DRIVER, - PrivDir = wxe_util:priv_dir(?DRIVER), + PrivDir = wxe_util:priv_dir(?DRIVER, SilentStart), erlang:group_leader(whereis(init), self()), case catch erlang:system_info(smp_support) of true -> ok; _ -> - error_logger:format("WX ERROR: SMP emulator required (start with erl -smp)", []), + wxe_util:opt_error_log(SilentStart, + "WX ERROR: SMP emulator required" + " (start with erl -smp)", + []), erlang:error(not_smp) end, @@ -114,7 +117,9 @@ init([]) -> case erl_ddll:load_driver(PrivDir,DriverName) of ok -> ok; {error, What} -> - error_logger:format("WX Failed loading ~p@~p ~n", [DriverName,PrivDir]), + wxe_util:opt_error_log(SilentStart, + "WX Failed loading ~p@~p ~n", + [DriverName,PrivDir]), Str = erl_ddll:format_error(What), erlang:error({load_driver,Str}) end, @@ -210,4 +215,3 @@ debug_ping(Port) -> _R = (catch erlang:port_call(Port, 0, [])), %% io:format("Erlang ping ~p ~n", [_R]), debug_ping(Port). - diff --git a/lib/wx/src/wxe_server.erl b/lib/wx/src/wxe_server.erl index 6e982c97f6..689fe16a70 100644 --- a/lib/wx/src/wxe_server.erl +++ b/lib/wx/src/wxe_server.erl @@ -29,7 +29,7 @@ -behaviour(gen_server). %% API --export([start/0, stop/0, register_me/1, set_debug/2, invoke_callback/1]). +-export([start/1, stop/0, register_me/1, set_debug/2, invoke_callback/1]). %% gen_server callbacks -export([init/1, handle_call/3, handle_cast/2, handle_info/2, @@ -49,13 +49,13 @@ %% API %%==================================================================== %%-------------------------------------------------------------------- -%% Function: start() -> #wx_env{} +%% Function: start(SilentStart) -> #wx_env{} %% Description: Starts the server %%-------------------------------------------------------------------- -start() -> +start(SilentStart) -> case get(?WXE_IDENTIFIER) of undefined -> - case gen_server:start(?MODULE, [], []) of + case gen_server:start(?MODULE, [SilentStart], []) of {ok, Pid} -> {ok, Port} = gen_server:call(Pid, get_port, infinity), wx:set_env(Env = #wx_env{port=Port,sv=Pid}), @@ -69,7 +69,7 @@ start() -> Env; false -> %% Ok we got an old wx env, someone forgot erase(?WXE_IDENTIFIER), %% to call wx:destroy() - start() + start(SilentStart) end end. @@ -88,8 +88,8 @@ set_debug(Pid, Level) -> %% gen_server callbacks %%==================================================================== -init([]) -> - {Port,CBPort} = wxe_master:init_port(), +init([SilentStart]) -> + {Port,CBPort} = wxe_master:init_port(SilentStart), put(?WXE_IDENTIFIER, #wx_env{port=Port,sv=self()}), {ok,#state{port=Port, cb_port=CBPort, users=gb_trees:empty(), cb=gb_trees:empty(), cb_cnt=1}}. diff --git a/lib/wx/src/wxe_util.erl b/lib/wx/src/wxe_util.erl index 02bca62486..3022b7f3f2 100644 --- a/lib/wx/src/wxe_util.erl +++ b/lib/wx/src/wxe_util.erl @@ -32,7 +32,7 @@ get_const/1,colour_bin/1,datetime_bin/1, to_bool/1,from_bool/1]). --export([wxgl_dl/0, priv_dir/1]). +-export([wxgl_dl/0, priv_dir/2, opt_error_log/3]). -include("wxe.hrl"). @@ -205,7 +205,7 @@ check_previous() -> wxgl_dl() -> DynLib0 = "erl_gl", - PrivDir = priv_dir(DynLib0), + PrivDir = priv_dir(DynLib0, false), DynLib = case os:type() of {win32,_} -> DynLib0 ++ ".dll"; @@ -214,7 +214,7 @@ wxgl_dl() -> end, filename:join(PrivDir, DynLib). -priv_dir(Driver0) -> +priv_dir(Driver0, Silent) -> {file, Path} = code:is_loaded(?MODULE), Priv = case filelib:is_regular(Path) of true -> @@ -229,13 +229,13 @@ priv_dir(Driver0) -> _ -> Driver0 ++ ".so" end, - case file:read_file_info(filename:join(Priv, Driver)) of {ok, _} -> Priv; {error, _} -> - error_logger:format("ERROR: Could not find \'~s\' in: ~s~n", - [Driver, Priv]), + opt_error_log(Silent, + "ERROR: Could not find \'~s\' in: ~s~n", + [Driver, Priv]), erlang:error({load_driver, "No driver found"}) end. @@ -244,3 +244,7 @@ strip(Src, Src) -> strip([H|R], Src) -> [H| strip(R, Src)]. +opt_error_log(false, Format, Args) -> + error_logger:format(Format, Args); +opt_error_log(true, _Format, _Args) -> + ok. diff --git a/lib/wx/test/wx_basic_SUITE.erl b/lib/wx/test/wx_basic_SUITE.erl index 46c72bb453..20115a41fb 100644 --- a/lib/wx/test/wx_basic_SUITE.erl +++ b/lib/wx/test/wx_basic_SUITE.erl @@ -47,7 +47,7 @@ end_per_testcase(Func,Config) -> suite() -> [{ct_hooks,[ts_install_cth]}]. all() -> - [create_window, several_apps, wx_api, wx_misc, + [silent_start, create_window, several_apps, wx_api, wx_misc, data_types, wx_object]. groups() -> @@ -62,6 +62,25 @@ end_per_group(_GroupName, Config) -> %% The test cases +%% test silent start of wx +silent_start(TestInfo) when is_atom(TestInfo) -> wx_test_lib:tc_info(TestInfo); +silent_start(_Config) -> + ?mr(wx_ref, wx:new([])), + wx:destroy(), + + ?mr(wx_ref, wx:new([{silent_start, true}])), + wx:destroy(), + + ?mr(wx_ref, wx:new([{silent_start, true}, {debug, verbose}])), + wx:destroy(), + + ?mr(wx_ref, wx:new([{silent_start, false}])), + wx:destroy(), + + ?mr('EXIT', catch wx:new([{silent_start, foo}])), + + ok. + %% create and test creating a window create_window(TestInfo) when is_atom(TestInfo) -> wx_test_lib:tc_info(TestInfo); create_window(Config) -> |
