diff options
Diffstat (limited to 'lib')
95 files changed, 1302 insertions, 4249 deletions
diff --git a/lib/Makefile b/lib/Makefile index 34c2fe9a9e..64143a39e0 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -36,7 +36,7 @@ ALL_ERLANG_APPLICATIONS = xmerl edoc erl_docgen snmp otp_mibs erl_interface \ public_key ssl observer odbc diameter \ cosTransactions cosEvent cosTime cosNotification \ cosProperty cosFileTransfer cosEventDomain et megaco webtool \ - eunit ssh typer percept eldap dialyzer hipe ose + eunit ssh typer percept eldap dialyzer hipe ifdef BUILD_ALL ERLANG_APPLICATIONS += $(ALL_ERLANG_APPLICATIONS) diff --git a/lib/asn1/c_src/Makefile b/lib/asn1/c_src/Makefile index 2b72e1a214..e0d4f09a70 100644 --- a/lib/asn1/c_src/Makefile +++ b/lib/asn1/c_src/Makefile @@ -97,12 +97,7 @@ endif _create_dirs := $(shell mkdir -p $(OBJDIR) $(LIBDIR)) -ifneq ($(findstring ose,$(TARGET)),ose) opt: $(NIF_SHARED_OBJ_FILE) -else -# Do not build dynamic files on OSE -opt: -endif debug: opt @@ -140,9 +135,7 @@ include $(ERL_TOP)/make/otp_release_targets.mk release_spec: opt $(INSTALL_DIR) "$(RELSYSDIR)/priv/lib" -ifneq ($(findstring ose,$(TARGET)),ose) $(INSTALL_PROGRAM) $(NIF_SHARED_OBJ_FILE) "$(RELSYSDIR)/priv/lib" -endif $(INSTALL_DIR) "$(RELSYSDIR)/c_src" $(INSTALL_DATA) *.c "$(RELSYSDIR)/c_src" diff --git a/lib/compiler/src/Makefile b/lib/compiler/src/Makefile index 299b2892fc..f75beaba20 100644 --- a/lib/compiler/src/Makefile +++ b/lib/compiler/src/Makefile @@ -50,6 +50,7 @@ MODULES = \ beam_asm \ beam_block \ beam_bool \ + beam_bs \ beam_bsm \ beam_clean \ beam_dead \ @@ -62,6 +63,7 @@ MODULES = \ beam_opcodes \ beam_peep \ beam_receive \ + beam_reorder \ beam_split \ beam_trim \ beam_type \ diff --git a/lib/compiler/src/beam_block.erl b/lib/compiler/src/beam_block.erl index 0321b1c07b..10dbaf462c 100644 --- a/lib/compiler/src/beam_block.erl +++ b/lib/compiler/src/beam_block.erl @@ -23,14 +23,13 @@ -module(beam_block). -export([module/2]). --import(lists, [mapfoldl/3,reverse/1,reverse/2,foldl/3,member/2]). --define(MAXREG, 1024). +-import(lists, [reverse/1,reverse/2,foldl/3,member/2]). -module({Mod,Exp,Attr,Fs0,Lc0}, _Opt) -> - {Fs,Lc} = mapfoldl(fun function/2, Lc0, Fs0), +module({Mod,Exp,Attr,Fs0,Lc}, _Opt) -> + Fs = [function(F) || F <- Fs0], {ok,{Mod,Exp,Attr,Fs,Lc}}. -function({function,Name,Arity,CLabel,Is0}, Lc0) -> +function({function,Name,Arity,CLabel,Is0}) -> try %% Collect basic blocks and optimize them. Is1 = blockify(Is0), @@ -40,11 +39,8 @@ function({function,Name,Arity,CLabel,Is0}, Lc0) -> Is5 = opt_blocks(Is4), Is6 = beam_utils:delete_live_annos(Is5), - %% Optimize bit syntax. - {Is,Lc} = bsm_opt(Is6, Lc0), - %% Done. - {{function,Name,Arity,CLabel,Is},Lc} + {function,Name,Arity,CLabel,Is6} catch Class:Error -> Stack = erlang:get_stacktrace(), @@ -62,56 +58,15 @@ blockify(Is) -> blockify([{loop_rec,{f,Fail},{x,0}},{loop_rec_end,_Lbl},{label,Fail}|Is], Acc) -> %% Useless instruction sequence. blockify(Is, Acc); -blockify([{test,is_atom,{f,Fail},[Reg]}=I| - [{select,select_val,Reg,{f,Fail}, - [{atom,false},{f,_}=BrFalse, - {atom,true}=AtomTrue,{f,_}=BrTrue]}|Is]=Is0], - [{block,Bl}|_]=Acc) -> - case is_last_bool(Bl, Reg) of - false -> - blockify(Is0, [I|Acc]); - true -> - %% The last instruction is a boolean operator/guard BIF that can't fail. - %% We can convert the three-way branch to a two-way branch (eliminating - %% the reference to the failure label). - blockify(Is, [{jump,BrTrue}, - {test,is_eq_exact,BrFalse,[Reg,AtomTrue]}|Acc]) - end; -blockify([{test,is_atom,{f,Fail},[Reg]}=I| - [{select,select_val,Reg,{f,Fail}, - [{atom,true}=AtomTrue,{f,_}=BrTrue, - {atom,false},{f,_}=BrFalse]}|Is]=Is0], - [{block,Bl}|_]=Acc) -> - case is_last_bool(Bl, Reg) of - false -> - blockify(Is0, [I|Acc]); - true -> - blockify(Is, [{jump,BrTrue}, - {test,is_eq_exact,BrFalse,[Reg,AtomTrue]}|Acc]) - end; blockify([I|Is0]=IsAll, Acc) -> - case is_bs_put(I) of - true -> - {BsPuts0,Is} = collect_bs_puts(IsAll), - BsPuts = opt_bs_puts(BsPuts0), - blockify(Is, reverse(BsPuts, Acc)); - false -> - case collect(I) of - error -> blockify(Is0, [I|Acc]); - Instr when is_tuple(Instr) -> - {Block,Is} = collect_block(IsAll), - blockify(Is, [{block,Block}|Acc]) - end + case collect(I) of + error -> blockify(Is0, [I|Acc]); + Instr when is_tuple(Instr) -> + {Block,Is} = collect_block(IsAll), + blockify(Is, [{block,Block}|Acc]) end; blockify([], Acc) -> reverse(Acc). -is_last_bool([{set,[Reg],As,{bif,N,_}}], Reg) -> - Ar = length(As), - erl_internal:new_type_test(N, Ar) orelse erl_internal:comp_op(N, Ar) - orelse erl_internal:bool_op(N, Ar); -is_last_bool([_|Is], Reg) -> is_last_bool(Is, Reg); -is_last_bool([], _) -> false. - collect_block(Is) -> collect_block(Is, []). @@ -149,7 +104,10 @@ collect({put_map,F,Op,S,D,R,{list,Puts}}) -> collect({get_map_elements,F,S,{list,Gets}}) -> {Ss,Ds} = beam_utils:split_even(Gets), {set,Ds,[S|Ss],{get_map_elements,F}}; -collect({'catch',R,L}) -> {set,[R],[],{'catch',L}}; +collect({'catch'=Op,R,L}) -> + {set,[R],[],{try_catch,Op,L}}; +collect({'try'=Op,R,L}) -> + {set,[R],[],{try_catch,Op,L}}; collect(fclearerror) -> {set,[],[],fclearerror}; collect({fcheckerror,{f,0}}) -> {set,[],[],fcheckerror}; collect({fmove,S,D}) -> {set,[D],[S],fmove}; @@ -183,7 +141,9 @@ opt_blocks([I|Is]) -> opt_blocks([]) -> []. opt_block(Is0) -> - Is = find_fixpoint(fun opt/1, Is0), + Is = find_fixpoint(fun(Is) -> + opt_tuple_element(opt(Is)) + end, Is0), opt_alloc(Is). find_fixpoint(OptFun, Is0) -> @@ -279,76 +239,151 @@ opt_moves([X0,Y0], Is0) -> not_possible -> {[X,Y0],Is2}; {X,_} -> {[X,Y0],Is2}; {Y,Is} -> {[X,Y],Is} - end; -opt_moves(Ds, Is) -> - %% multiple destinations -> pass through - {Ds,Is}. - + end. %% opt_move(Dest, [Instruction]) -> {UpdatedDest,[Instruction]} | not_possible %% If there is a {move,Dest,FinalDest} instruction %% in the instruction stream, remove the move instruction %% and let FinalDest be the destination. -%% -%% For this optimization to be safe, we must be sure that -%% Dest will not be referenced in any other by other instructions -%% in the rest of the instruction stream. Not even the indirect -%% reference by an instruction that may allocate (such as -%% test_heap/2 or a GC Bif) is allowed. opt_move(Dest, Is) -> - opt_move_1(Dest, Is, ?MAXREG, []). - -opt_move_1(R, [{set,_,_,{alloc,Live,_}}|_]=Is, SafeRegs, Acc) when Live < SafeRegs -> - %% Downgrade number of safe regs and rescan the instruction, as it most probably - %% is a gc_bif instruction. - opt_move_1(R, Is, Live, Acc); -opt_move_1(R, [{set,[{x,X}=D],[R],move}|Is], SafeRegs, Acc) -> - case X < SafeRegs andalso beam_utils:is_killed_block(R, Is) of - true -> opt_move_2(D, Acc, Is); - false -> not_possible + opt_move_1(Dest, Is, []). + +opt_move_1(R, [{set,[D],[R],move}|Is0], Acc) -> + %% Provided that the source register is killed by instructions + %% that follow, the optimization is safe. + case eliminate_use_of_from_reg(Is0, R, D, []) of + {yes,Is} -> opt_move_rev(D, Acc, Is); + no -> not_possible end; -opt_move_1(R, [{set,[D],[R],move}|Is], _SafeRegs, Acc) -> - case beam_utils:is_killed_block(R, Is) of - true -> opt_move_2(D, Acc, Is); - false -> not_possible +opt_move_1({x,_}, [{set,_,_,{alloc,_,_}}|_], _) -> + %% The optimization is not possible. If the X register is not + %% killed by allocation, the optimization would not be safe. + %% If the X register is killed, it means that there cannot + %% follow a 'move' instruction with this X register as the + %% source. + not_possible; +opt_move_1(R, [{set,_,_,_}=I|Is], Acc) -> + %% If the source register is either killed or used by this + %% instruction, the optimimization is not possible. + case is_killed_or_used(R, I) of + true -> not_possible; + false -> opt_move_1(R, Is, [I|Acc]) end; -opt_move_1(R, [I|Is], SafeRegs, Acc) -> - case is_transparent(R, I) of - false -> not_possible; - true -> opt_move_1(R, Is, SafeRegs, [I|Acc]) - end. +opt_move_1(_, _, _) -> + not_possible. + +%% opt_tuple_element([Instruction]) -> [Instruction] +%% If possible, move get_tuple_element instructions forward +%% in the instruction stream to a move instruction, eliminating +%% the move instruction. Example: +%% +%% get_tuple_element Tuple Pos Dst1 +%% ... +%% move Dst1 Dst2 +%% +%% This code may be possible to rewrite to: +%% +%% %%(Moved get_tuple_element instruction) +%% ... +%% get_tuple_element Tuple Pos Dst2 +%% -%% Reverse the instructions, while checking that there are no instructions that -%% would interfere with using the new destination register chosen. +opt_tuple_element([{set,[D],[S],{get_tuple_element,_}}=I|Is0]) -> + case opt_tuple_element_1(Is0, I, {S,D}, []) of + no -> + [I|opt_tuple_element(Is0)]; + {yes,Is} -> + opt_tuple_element(Is) + end; +opt_tuple_element([I|Is]) -> + [I|opt_tuple_element(Is)]; +opt_tuple_element([]) -> []. + +opt_tuple_element_1([{set,_,_,{alloc,_,_}}|_], _, _, _) -> + no; +opt_tuple_element_1([{set,_,_,{try_catch,_,_}}|_], _, _, _) -> + no; +opt_tuple_element_1([{set,[D],[S],move}|Is0], I0, {_,S}, Acc) -> + case eliminate_use_of_from_reg(Is0, S, D, []) of + no -> + no; + {yes,Is} -> + {set,[S],Ss,Op} = I0, + I = {set,[D],Ss,Op}, + {yes,reverse(Acc, [I|Is])} + end; +opt_tuple_element_1([{set,Ds,Ss,_}=I|Is], MovedI, {S,D}=Regs, Acc) -> + case member(S, Ds) orelse member(D, Ss) of + true -> + no; + false -> + opt_tuple_element_1(Is, MovedI, Regs, [I|Acc]) + end; +opt_tuple_element_1(_, _, _, _) -> no. + +%% Reverse the instructions, while checking that there are no +%% instructions that would interfere with using the new destination +%% register (D). -opt_move_2(D, [I|Is], Acc) -> - case is_transparent(D, I) of - false -> not_possible; - true -> opt_move_2(D, Is, [I|Acc]) +opt_move_rev(D, [I|Is], Acc) -> + case is_killed_or_used(D, I) of + true -> not_possible; + false -> opt_move_rev(D, Is, [I|Acc]) + end; +opt_move_rev(D, [], Acc) -> {D,Acc}. + +%% is_killed_or_used(Register, {set,_,_,_}) -> bool() +%% Test whether the register is used by the instruction. + +is_killed_or_used(R, {set,Ss,Ds,_}) -> + member(R, Ds) orelse member(R, Ss). + +%% eliminate_use_of_from_reg([Instruction], FromRegister, ToRegister, Acc) -> +%% {yes,Is} | no +%% Eliminate any use of FromRegister in the instruction sequence +%% by replacing uses of FromRegister with ToRegister. If FromRegister +%% is referenced by an allocation instruction, return 'no' to indicate +%% that FromRegister is still used and that the optimization is not +%% possible. + +eliminate_use_of_from_reg([{set,_,_,{alloc,Live,_}}|_]=Is0, {x,X}, _, Acc) -> + if + X < Live -> + no; + true -> + {yes,reverse(Acc, Is0)} end; -opt_move_2(D, [], Acc) -> {D,Acc}. - -%% is_transparent(Register, Instruction) -> true | false -%% Returns true if Instruction does not in any way references Register -%% (even indirectly by an allocation instruction). -%% Returns false if Instruction does reference Register, or we are -%% not sure. - -is_transparent({x,X}, {set,_,_,{alloc,Live,_}}) when X < Live -> - false; -is_transparent(R, {set,Ds,Ss,_Op}) -> - case member(R, Ds) of - true -> false; - false -> not member(R, Ss) +eliminate_use_of_from_reg([{set,Ds,Ss0,Op}=I0|Is], From, To, Acc) -> + I = case member(From, Ss0) of + true -> + Ss = [case S of + From -> To; + _ -> S + end || S <- Ss0], + {set,Ds,Ss,Op}; + false -> + I0 + end, + case member(From, Ds) of + true -> + {yes,reverse(Acc, [I|Is])}; + false -> + eliminate_use_of_from_reg(Is, From, To, [I|Acc]) end; -is_transparent(_, _) -> false. +eliminate_use_of_from_reg([I]=Is, From, _To, Acc) -> + case beam_utils:is_killed_block(From, [I]) of + true -> + {yes,reverse(Acc, Is)}; + false -> + no + end. %% opt_alloc(Instructions) -> Instructions' %% Optimises all allocate instructions. opt_alloc([{set,[],[],{alloc,R,{_,Ns,Nh,[]}}}|Is]) -> - [{set,[],[],opt_alloc(Is, Ns, Nh, R)}|opt(Is)]; + [{set,[],[],opt_alloc(Is, Ns, Nh, R)}|Is]; opt_alloc([I|Is]) -> [I|opt_alloc(Is)]; opt_alloc([]) -> []. @@ -414,234 +449,3 @@ x_dead([], Regs) -> Regs. x_live([{x,N}|Rs], Regs) -> x_live(Rs, Regs bor (1 bsl N)); x_live([_|Rs], Regs) -> x_live(Rs, Regs); x_live([], Regs) -> Regs. - -%%% -%%% Evaluation of constant bit fields. -%%% - -is_bs_put({bs_put,_,{bs_put_integer,_,_},_}) -> true; -is_bs_put({bs_put,_,{bs_put_float,_,_},_}) -> true; -is_bs_put(_) -> false. - -collect_bs_puts(Is) -> - collect_bs_puts_1(Is, []). - -collect_bs_puts_1([I|Is]=Is0, Acc) -> - case is_bs_put(I) of - false -> {reverse(Acc),Is0}; - true -> collect_bs_puts_1(Is, [I|Acc]) - end. - -opt_bs_puts(Is) -> - opt_bs_1(Is, []). - -opt_bs_1([{bs_put,Fail, - {bs_put_float,1,Flags0},[{integer,Sz},Src]}=I0|Is], Acc) -> - try eval_put_float(Src, Sz, Flags0) of - <<Int:Sz>> -> - Flags = force_big(Flags0), - I = {bs_put,Fail,{bs_put_integer,1,Flags}, - [{integer,Sz},{integer,Int}]}, - opt_bs_1([I|Is], Acc) - catch - error:_ -> - opt_bs_1(Is, [I0|Acc]) - end; -opt_bs_1([{bs_put,_,{bs_put_integer,1,_},[{integer,8},{integer,_}]}|_]=IsAll, - Acc0) -> - {Is,Acc} = bs_collect_string(IsAll, Acc0), - opt_bs_1(Is, Acc); -opt_bs_1([{bs_put,Fail,{bs_put_integer,1,F},[{integer,Sz},{integer,N}]}=I|Is0], - Acc) when Sz > 8 -> - case field_endian(F) of - big -> - %% We can do this optimization for any field size without risk - %% for code explosion. - case bs_split_int(N, Sz, Fail, Is0) of - no_split -> opt_bs_1(Is0, [I|Acc]); - Is -> opt_bs_1(Is, Acc) - end; - little when Sz < 128 -> - %% We only try to optimize relatively small fields, to avoid - %% an explosion in code size. - <<Int:Sz>> = <<N:Sz/little>>, - Flags = force_big(F), - Is = [{bs_put,Fail,{bs_put_integer,1,Flags}, - [{integer,Sz},{integer,Int}]}|Is0], - opt_bs_1(Is, Acc); - _ -> %native or too wide little field - opt_bs_1(Is0, [I|Acc]) - end; -opt_bs_1([{bs_put,Fail,{Op,U,F},[{integer,Sz},Src]}|Is], Acc) when U > 1 -> - opt_bs_1([{bs_put,Fail,{Op,1,F},[{integer,U*Sz},Src]}|Is], Acc); -opt_bs_1([I|Is], Acc) -> - opt_bs_1(Is, [I|Acc]); -opt_bs_1([], Acc) -> reverse(Acc). - -eval_put_float(Src, Sz, Flags) when Sz =< 256 -> %Only evaluate if Sz is reasonable. - Val = value(Src), - case field_endian(Flags) of - little -> <<Val:Sz/little-float-unit:1>>; - big -> <<Val:Sz/big-float-unit:1>> - %% native intentionally not handled here - we can't optimize it. - end. - -value({integer,I}) -> I; -value({float,F}) -> F. - -bs_collect_string(Is, [{bs_put,_,{bs_put_string,Len,{string,Str}},[]}|Acc]) -> - bs_coll_str_1(Is, Len, reverse(Str), Acc); -bs_collect_string(Is, Acc) -> - bs_coll_str_1(Is, 0, [], Acc). - -bs_coll_str_1([{bs_put,_,{bs_put_integer,U,_},[{integer,Sz},{integer,V}]}|Is], - Len, StrAcc, IsAcc) when U*Sz =:= 8 -> - Byte = V band 16#FF, - bs_coll_str_1(Is, Len+1, [Byte|StrAcc], IsAcc); -bs_coll_str_1(Is, Len, StrAcc, IsAcc) -> - {Is,[{bs_put,{f,0},{bs_put_string,Len,{string,reverse(StrAcc)}},[]}|IsAcc]}. - -field_endian({field_flags,F}) -> field_endian_1(F). - -field_endian_1([big=E|_]) -> E; -field_endian_1([little=E|_]) -> E; -field_endian_1([native=E|_]) -> E; -field_endian_1([_|Fs]) -> field_endian_1(Fs). - -force_big({field_flags,F}) -> - {field_flags,force_big_1(F)}. - -force_big_1([big|_]=Fs) -> Fs; -force_big_1([little|Fs]) -> [big|Fs]; -force_big_1([F|Fs]) -> [F|force_big_1(Fs)]. - -bs_split_int(0, Sz, _, _) when Sz > 64 -> - %% We don't want to split in this case because the - %% string will consist of only zeroes. - no_split; -bs_split_int(-1, Sz, _, _) when Sz > 64 -> - %% We don't want to split in this case because the - %% string will consist of only 255 bytes. - no_split; -bs_split_int(N, Sz, Fail, Acc) -> - FirstByteSz = case Sz rem 8 of - 0 -> 8; - Rem -> Rem - end, - bs_split_int_1(N, FirstByteSz, Sz, Fail, Acc). - -bs_split_int_1(-1, _, Sz, Fail, Acc) when Sz > 64 -> - I = {bs_put,Fail,{bs_put_integer,1,{field_flags,[big]}}, - [{integer,Sz},{integer,-1}]}, - [I|Acc]; -bs_split_int_1(0, _, Sz, Fail, Acc) when Sz > 64 -> - I = {bs_put,Fail,{bs_put_integer,1,{field_flags,[big]}}, - [{integer,Sz},{integer,0}]}, - [I|Acc]; -bs_split_int_1(N, ByteSz, Sz, Fail, Acc) when Sz > 0 -> - Mask = (1 bsl ByteSz) - 1, - I = {bs_put,Fail,{bs_put_integer,1,{field_flags,[big]}}, - [{integer,ByteSz},{integer,N band Mask}]}, - bs_split_int_1(N bsr ByteSz, 8, Sz-ByteSz, Fail, [I|Acc]); -bs_split_int_1(_, _, _, _, Acc) -> Acc. - - -%%% -%%% Optimization of new bit syntax matching: get rid -%%% of redundant bs_restore2/2 instructions across select_val -%%% instructions, as well as a few other simple peep-hole optimizations. -%%% - -bsm_opt(Is0, Lc0) -> - {Is1,D0,Lc} = bsm_scan(Is0, [], Lc0, []), - Is2 = case D0 of - [] -> - Is1; - _ -> - D = gb_trees:from_orddict(orddict:from_list(D0)), - bsm_reroute(Is1, D, none, []) - end, - Is = beam_clean:bs_clean_saves(Is2), - {bsm_opt_2(Is, []),Lc}. - -bsm_scan([{label,L}=Lbl,{bs_restore2,_,Save}=R|Is], D0, Lc, Acc0) -> - D = [{{L,Save},Lc}|D0], - Acc = [{label,Lc},R,Lbl|Acc0], - bsm_scan(Is, D, Lc+1, Acc); -bsm_scan([I|Is], D, Lc, Acc) -> - bsm_scan(Is, D, Lc, [I|Acc]); -bsm_scan([], D, Lc, Acc) -> - {reverse(Acc),D,Lc}. - -bsm_reroute([{bs_save2,Reg,Save}=I|Is], D, _, Acc) -> - bsm_reroute(Is, D, {Reg,Save}, [I|Acc]); -bsm_reroute([{bs_restore2,Reg,Save}=I|Is], D, _, Acc) -> - bsm_reroute(Is, D, {Reg,Save}, [I|Acc]); -bsm_reroute([{label,_}=I|Is], D, S, Acc) -> - bsm_reroute(Is, D, S, [I|Acc]); -bsm_reroute([{select,select_val,Reg,F0,Lbls0}|Is], D, {_,Save}=S, Acc0) -> - [F|Lbls] = bsm_subst_labels([F0|Lbls0], Save, D), - Acc = [{select,select_val,Reg,F,Lbls}|Acc0], - bsm_reroute(Is, D, S, Acc); -bsm_reroute([{test,TestOp,F0,TestArgs}=I|Is], D, {_,Save}=S, Acc0) -> - F = bsm_subst_label(F0, Save, D), - Acc = [{test,TestOp,F,TestArgs}|Acc0], - case bsm_not_bs_test(I) of - true -> - %% The test instruction will not update the bit offset for the - %% binary being matched. Therefore the save position can be kept. - bsm_reroute(Is, D, S, Acc); - false -> - %% The test instruction might update the bit offset. Kill our - %% remembered Save position. - bsm_reroute(Is, D, none, Acc) - end; -bsm_reroute([{test,TestOp,F0,Live,TestArgs,Dst}|Is], D, {_,Save}, Acc0) -> - F = bsm_subst_label(F0, Save, D), - Acc = [{test,TestOp,F,Live,TestArgs,Dst}|Acc0], - %% The test instruction will update the bit offset. Kill our - %% remembered Save position. - bsm_reroute(Is, D, none, Acc); -bsm_reroute([{block,[{set,[],[],{alloc,_,_}}]}=Bl, - {bs_context_to_binary,_}=I|Is], D, S, Acc) -> - %% To help further bit syntax optimizations. - bsm_reroute([I,Bl|Is], D, S, Acc); -bsm_reroute([I|Is], D, _, Acc) -> - bsm_reroute(Is, D, none, [I|Acc]); -bsm_reroute([], _, _, Acc) -> reverse(Acc). - -bsm_opt_2([{test,bs_test_tail2,F,[Ctx,Bits]}|Is], - [{test,bs_skip_bits2,F,[Ctx,{integer,I},Unit,_Flags]}|Acc]) -> - bsm_opt_2(Is, [{test,bs_test_tail2,F,[Ctx,Bits+I*Unit]}|Acc]); -bsm_opt_2([{test,bs_skip_bits2,F,[Ctx,{integer,I1},Unit1,_]}|Is], - [{test,bs_skip_bits2,F,[Ctx,{integer,I2},Unit2,Flags]}|Acc]) -> - bsm_opt_2(Is, [{test,bs_skip_bits2,F, - [Ctx,{integer,I1*Unit1+I2*Unit2},1,Flags]}|Acc]); -bsm_opt_2([I|Is], Acc) -> - bsm_opt_2(Is, [I|Acc]); -bsm_opt_2([], Acc) -> reverse(Acc). - -%% bsm_not_bs_test({test,Name,_,Operands}) -> true|false. -%% Test whether is the test is a "safe", i.e. does not move the -%% bit offset for a binary. -%% -%% 'true' means that the test is safe, 'false' that we don't know or -%% that the test moves the offset (e.g. bs_get_integer2). - -bsm_not_bs_test({test,bs_test_tail2,_,[_,_]}) -> true; -bsm_not_bs_test(Test) -> beam_utils:is_pure_test(Test). - -bsm_subst_labels(Fs, Save, D) -> - bsm_subst_labels_1(Fs, Save, D, []). - -bsm_subst_labels_1([F|Fs], Save, D, Acc) -> - bsm_subst_labels_1(Fs, Save, D, [bsm_subst_label(F, Save, D)|Acc]); -bsm_subst_labels_1([], _, _, Acc) -> - reverse(Acc). - -bsm_subst_label({f,Lbl0}=F, Save, D) -> - case gb_trees:lookup({Lbl0,Save}, D) of - {value,Lbl} -> {f,Lbl}; - none -> F - end; -bsm_subst_label(Other, _, _) -> Other. diff --git a/lib/compiler/src/beam_bool.erl b/lib/compiler/src/beam_bool.erl index 14b6381230..c9e103eae9 100644 --- a/lib/compiler/src/beam_bool.erl +++ b/lib/compiler/src/beam_bool.erl @@ -25,8 +25,6 @@ -import(lists, [reverse/1,reverse/2,foldl/3,mapfoldl/3,map/2]). --define(MAXREG, 1024). - -record(st, {next, %Next label number. ll %Live regs at labels. diff --git a/lib/compiler/src/beam_bs.erl b/lib/compiler/src/beam_bs.erl new file mode 100644 index 0000000000..55fa7ce10c --- /dev/null +++ b/lib/compiler/src/beam_bs.erl @@ -0,0 +1,278 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 1999-2013. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +%% +%% Purpose : Partitions assembly instructions into basic blocks and +%% optimizes them. + +-module(beam_bs). + +-export([module/2]). +-import(lists, [mapfoldl/3,reverse/1]). + +module({Mod,Exp,Attr,Fs0,Lc0}, _Opt) -> + {Fs,Lc} = mapfoldl(fun function/2, Lc0, Fs0), + {ok,{Mod,Exp,Attr,Fs,Lc}}. + +function({function,Name,Arity,CLabel,Is0}, Lc0) -> + try + Is1 = bs_put_opt(Is0), + {Is,Lc} = bsm_opt(Is1, Lc0), + {{function,Name,Arity,CLabel,Is},Lc} + catch + Class:Error -> + Stack = erlang:get_stacktrace(), + io:fwrite("Function: ~w/~w\n", [Name,Arity]), + erlang:raise(Class, Error, Stack) + end. + +%%% +%%% Evaluation of constant bit fields. +%%% + +bs_put_opt([{bs_put,_,_,_}=I|Is0]) -> + {BsPuts0,Is} = collect_bs_puts(Is0, [I]), + BsPuts = opt_bs_puts(BsPuts0), + BsPuts ++ bs_put_opt(Is); +bs_put_opt([I|Is]) -> + [I|bs_put_opt(Is)]; +bs_put_opt([]) -> []. + +collect_bs_puts([{bs_put,_,_,_}=I|Is], Acc) -> + collect_bs_puts(Is, [I|Acc]); +collect_bs_puts([_|_]=Is, Acc) -> + {reverse(Acc),Is}. + +opt_bs_puts(Is) -> + opt_bs_1(Is, []). + +opt_bs_1([{bs_put,Fail, + {bs_put_float,1,Flags0},[{integer,Sz},Src]}=I0|Is], Acc) -> + try eval_put_float(Src, Sz, Flags0) of + <<Int:Sz>> -> + Flags = force_big(Flags0), + I = {bs_put,Fail,{bs_put_integer,1,Flags}, + [{integer,Sz},{integer,Int}]}, + opt_bs_1([I|Is], Acc) + catch + error:_ -> + opt_bs_1(Is, [I0|Acc]) + end; +opt_bs_1([{bs_put,_,{bs_put_integer,1,_},[{integer,8},{integer,_}]}|_]=IsAll, + Acc0) -> + {Is,Acc} = bs_collect_string(IsAll, Acc0), + opt_bs_1(Is, Acc); +opt_bs_1([{bs_put,Fail,{bs_put_integer,1,F},[{integer,Sz},{integer,N}]}=I|Is0], + Acc) when Sz > 8 -> + case field_endian(F) of + big -> + %% We can do this optimization for any field size without + %% risk for code explosion. + case bs_split_int(N, Sz, Fail, Is0) of + no_split -> opt_bs_1(Is0, [I|Acc]); + Is -> opt_bs_1(Is, Acc) + end; + little when Sz < 128 -> + %% We only try to optimize relatively small fields, to + %% avoid an explosion in code size. + <<Int:Sz>> = <<N:Sz/little>>, + Flags = force_big(F), + Is = [{bs_put,Fail,{bs_put_integer,1,Flags}, + [{integer,Sz},{integer,Int}]}|Is0], + opt_bs_1(Is, Acc); + _ -> %native or too wide little field + opt_bs_1(Is0, [I|Acc]) + end; +opt_bs_1([{bs_put,Fail,{Op,U,F},[{integer,Sz},Src]}|Is], Acc) when U > 1 -> + opt_bs_1([{bs_put,Fail,{Op,1,F},[{integer,U*Sz},Src]}|Is], Acc); +opt_bs_1([I|Is], Acc) -> + opt_bs_1(Is, [I|Acc]); +opt_bs_1([], Acc) -> reverse(Acc). + +eval_put_float(Src, Sz, Flags) when Sz =< 256 -> + %%Only evaluate if Sz is reasonable. + Val = value(Src), + case field_endian(Flags) of + little -> <<Val:Sz/little-float-unit:1>>; + big -> <<Val:Sz/big-float-unit:1>> + %% native intentionally not handled here - we can't optimize + %% it. + end. + +value({integer,I}) -> I; +value({float,F}) -> F. + +bs_collect_string(Is, [{bs_put,_,{bs_put_string,Len,{string,Str}},[]}|Acc]) -> + bs_coll_str_1(Is, Len, reverse(Str), Acc); +bs_collect_string(Is, Acc) -> + bs_coll_str_1(Is, 0, [], Acc). + +bs_coll_str_1([{bs_put,_,{bs_put_integer,U,_},[{integer,Sz},{integer,V}]}|Is], + Len, StrAcc, IsAcc) when U*Sz =:= 8 -> + Byte = V band 16#FF, + bs_coll_str_1(Is, Len+1, [Byte|StrAcc], IsAcc); +bs_coll_str_1(Is, Len, StrAcc, IsAcc) -> + {Is,[{bs_put,{f,0},{bs_put_string,Len,{string,reverse(StrAcc)}},[]}|IsAcc]}. + +field_endian({field_flags,F}) -> field_endian_1(F). + +field_endian_1([big=E|_]) -> E; +field_endian_1([little=E|_]) -> E; +field_endian_1([native=E|_]) -> E; +field_endian_1([_|Fs]) -> field_endian_1(Fs). + +force_big({field_flags,F}) -> + {field_flags,force_big_1(F)}. + +force_big_1([big|_]=Fs) -> Fs; +force_big_1([little|Fs]) -> [big|Fs]; +force_big_1([F|Fs]) -> [F|force_big_1(Fs)]. + +bs_split_int(0, Sz, _, _) when Sz > 64 -> + %% We don't want to split in this case because the + %% string will consist of only zeroes. + no_split; +bs_split_int(-1, Sz, _, _) when Sz > 64 -> + %% We don't want to split in this case because the + %% string will consist of only 255 bytes. + no_split; +bs_split_int(N, Sz, Fail, Acc) -> + FirstByteSz = case Sz rem 8 of + 0 -> 8; + Rem -> Rem + end, + bs_split_int_1(N, FirstByteSz, Sz, Fail, Acc). + +bs_split_int_1(-1, _, Sz, Fail, Acc) when Sz > 64 -> + I = {bs_put,Fail,{bs_put_integer,1,{field_flags,[big]}}, + [{integer,Sz},{integer,-1}]}, + [I|Acc]; +bs_split_int_1(0, _, Sz, Fail, Acc) when Sz > 64 -> + I = {bs_put,Fail,{bs_put_integer,1,{field_flags,[big]}}, + [{integer,Sz},{integer,0}]}, + [I|Acc]; +bs_split_int_1(N, ByteSz, Sz, Fail, Acc) when Sz > 0 -> + Mask = (1 bsl ByteSz) - 1, + I = {bs_put,Fail,{bs_put_integer,1,{field_flags,[big]}}, + [{integer,ByteSz},{integer,N band Mask}]}, + bs_split_int_1(N bsr ByteSz, 8, Sz-ByteSz, Fail, [I|Acc]); +bs_split_int_1(_, _, _, _, Acc) -> Acc. + +%%% +%%% Optimization of bit syntax matching: get rid +%%% of redundant bs_restore2/2 instructions across select_val +%%% instructions, as well as a few other simple peep-hole +%%% optimizations. +%%% + +bsm_opt(Is0, Lc0) -> + {Is1,D0,Lc} = bsm_scan(Is0, [], Lc0, []), + Is2 = case D0 of + [] -> + %% No bit syntax matching in this function. + Is1; + [_|_] -> + %% Optimize the bit syntax matching. + D = gb_trees:from_orddict(orddict:from_list(D0)), + bsm_reroute(Is1, D, none, []) + end, + Is = beam_clean:bs_clean_saves(Is2), + {bsm_opt_2(Is, []),Lc}. + +bsm_scan([{label,L}=Lbl,{bs_restore2,_,Save}=R|Is], D0, Lc, Acc0) -> + D = [{{L,Save},Lc}|D0], + Acc = [{label,Lc},R,Lbl|Acc0], + bsm_scan(Is, D, Lc+1, Acc); +bsm_scan([I|Is], D, Lc, Acc) -> + bsm_scan(Is, D, Lc, [I|Acc]); +bsm_scan([], D, Lc, Acc) -> + {reverse(Acc),D,Lc}. + +bsm_reroute([{bs_save2,Reg,Save}=I|Is], D, _, Acc) -> + bsm_reroute(Is, D, {Reg,Save}, [I|Acc]); +bsm_reroute([{bs_restore2,Reg,Save}=I|Is], D, _, Acc) -> + bsm_reroute(Is, D, {Reg,Save}, [I|Acc]); +bsm_reroute([{label,_}=I|Is], D, S, Acc) -> + bsm_reroute(Is, D, S, [I|Acc]); +bsm_reroute([{select,select_val,Reg,F0,Lbls0}|Is], D, {_,Save}=S, Acc0) -> + [F|Lbls] = bsm_subst_labels([F0|Lbls0], Save, D), + Acc = [{select,select_val,Reg,F,Lbls}|Acc0], + bsm_reroute(Is, D, S, Acc); +bsm_reroute([{test,TestOp,F0,TestArgs}=I|Is], D, {_,Save}=S, Acc0) -> + F = bsm_subst_label(F0, Save, D), + Acc = [{test,TestOp,F,TestArgs}|Acc0], + case bsm_not_bs_test(I) of + true -> + %% The test instruction will not update the bit offset for + %% the binary being matched. Therefore the save position + %% can be kept. + bsm_reroute(Is, D, S, Acc); + false -> + %% The test instruction might update the bit offset. Kill + %% our remembered Save position. + bsm_reroute(Is, D, none, Acc) + end; +bsm_reroute([{test,TestOp,F0,Live,TestArgs,Dst}|Is], D, {_,Save}, Acc0) -> + F = bsm_subst_label(F0, Save, D), + Acc = [{test,TestOp,F,Live,TestArgs,Dst}|Acc0], + %% The test instruction will update the bit offset. Kill our + %% remembered Save position. + bsm_reroute(Is, D, none, Acc); +bsm_reroute([{block,[{set,[],[],{alloc,_,_}}]}=Bl, + {bs_context_to_binary,_}=I|Is], D, S, Acc) -> + %% To help further bit syntax optimizations. + bsm_reroute([I,Bl|Is], D, S, Acc); +bsm_reroute([I|Is], D, _, Acc) -> + bsm_reroute(Is, D, none, [I|Acc]); +bsm_reroute([], _, _, Acc) -> reverse(Acc). + +bsm_opt_2([{test,bs_test_tail2,F,[Ctx,Bits]}|Is], + [{test,bs_skip_bits2,F,[Ctx,{integer,I},Unit,_Flags]}|Acc]) -> + bsm_opt_2(Is, [{test,bs_test_tail2,F,[Ctx,Bits+I*Unit]}|Acc]); +bsm_opt_2([{test,bs_skip_bits2,F,[Ctx,{integer,I1},Unit1,_]}|Is], + [{test,bs_skip_bits2,F,[Ctx,{integer,I2},Unit2,Flags]}|Acc]) -> + bsm_opt_2(Is, [{test,bs_skip_bits2,F, + [Ctx,{integer,I1*Unit1+I2*Unit2},1,Flags]}|Acc]); +bsm_opt_2([I|Is], Acc) -> + bsm_opt_2(Is, [I|Acc]); +bsm_opt_2([], Acc) -> reverse(Acc). + +%% bsm_not_bs_test({test,Name,_,Operands}) -> true|false. +%% Test whether is the test is a "safe", i.e. does not move the +%% bit offset for a binary. +%% +%% 'true' means that the test is safe, 'false' that we don't know or +%% that the test moves the offset (e.g. bs_get_integer2). + +bsm_not_bs_test({test,bs_test_tail2,_,[_,_]}) -> true; +bsm_not_bs_test(Test) -> beam_utils:is_pure_test(Test). + +bsm_subst_labels(Fs, Save, D) -> + bsm_subst_labels_1(Fs, Save, D, []). + +bsm_subst_labels_1([F|Fs], Save, D, Acc) -> + bsm_subst_labels_1(Fs, Save, D, [bsm_subst_label(F, Save, D)|Acc]); +bsm_subst_labels_1([], _, _, Acc) -> + reverse(Acc). + +bsm_subst_label({f,Lbl0}=F, Save, D) -> + case gb_trees:lookup({Lbl0,Save}, D) of + {value,Lbl} -> {f,Lbl}; + none -> F + end; +bsm_subst_label(Other, _, _) -> Other. diff --git a/lib/compiler/src/beam_clean.erl b/lib/compiler/src/beam_clean.erl index 919ee3ee7d..d9108c383d 100644 --- a/lib/compiler/src/beam_clean.erl +++ b/lib/compiler/src/beam_clean.erl @@ -141,7 +141,7 @@ renumber_labels([{bif,is_record,{f,_}, renumber_labels(Is, Acc, St); renumber_labels([{test,is_record,{f,_}=Fail, [Term,{atom,Tag}=TagAtom,{integer,Arity}]}|Is0], Acc, St) -> - Tmp = {x,1023}, + Tmp = {x,1022}, Is = case is_record_tuple(Term, Tag, Arity) of yes -> Is0; @@ -190,17 +190,11 @@ replace([{test,Test,{f,Lbl},Ops}|Is], Acc, D) -> replace([{test,Test,{f,Lbl},Live,Ops,Dst}|Is], Acc, D) -> replace(Is, [{test,Test,{f,label(Lbl, D)},Live,Ops,Dst}|Acc], D); replace([{select,I,R,{f,Fail0},Vls0}|Is], Acc, D) -> - Vls1 = map(fun ({f,L}) -> {f,label(L, D)}; - (Other) -> Other end, Vls0), + Vls = map(fun ({f,L}) -> {f,label(L, D)}; + (Other) -> Other + end, Vls0), Fail = label(Fail0, D), - case redundant_values(Vls1, Fail, []) of - [] -> - %% Oops, no choices left. The loader will not accept that. - %% Convert to a plain jump. - replace(Is, [{jump,{f,Fail}}|Acc], D); - Vls -> - replace(Is, [{select,I,R,{f,Fail},Vls}|Acc], D) - end; + replace(Is, [{select,I,R,{f,Fail},Vls}|Acc], D); replace([{'try',R,{f,Lbl}}|Is], Acc, D) -> replace(Is, [{'try',R,{f,label(Lbl, D)}}|Acc], D); replace([{'catch',R,{f,Lbl}}|Is], Acc, D) -> @@ -241,12 +235,6 @@ label(Old, D) -> {value,Val} -> Val; none -> throw({error,{undefined_label,Old}}) end. - -redundant_values([_,{f,Fail}|Vls], Fail, Acc) -> - redundant_values(Vls, Fail, Acc); -redundant_values([Val,Lbl|Vls], Fail, Acc) -> - redundant_values(Vls, Fail, [Lbl,Val|Acc]); -redundant_values([], _, Acc) -> reverse(Acc). %%% %%% Final fixup of bs_start_match2/5,bs_save2/bs_restore2 instructions for diff --git a/lib/compiler/src/beam_dead.erl b/lib/compiler/src/beam_dead.erl index ead88b57e9..11129c39bc 100644 --- a/lib/compiler/src/beam_dead.erl +++ b/lib/compiler/src/beam_dead.erl @@ -239,11 +239,26 @@ backward([{test,is_eq_exact,Fail,[Dst,{integer,Arity}]}=I| backward([{label,Lbl}=L|Is], D, Acc) -> backward(Is, beam_utils:index_label(Lbl, Acc, D), [L|Acc]); backward([{select,select_val,Reg,{f,Fail0},List0}|Is], D, Acc) -> - List = shortcut_select_list(List0, Reg, D, []), + List1 = shortcut_select_list(List0, Reg, D, []), Fail1 = shortcut_label(Fail0, D), Fail = shortcut_bs_test(Fail1, Is, D), - Sel = {select,select_val,Reg,{f,Fail},List}, - backward(Is, D, [Sel|Acc]); + List = prune_redundant(List1, Fail), + case List of + [] -> + Jump = {jump,{f,Fail}}, + backward([Jump|Is], D, Acc); + [V,F] -> + Test = {test,is_eq_exact,{f,Fail},[Reg,V]}, + Jump = {jump,F}, + backward([Jump,Test|Is], D, Acc); + [{atom,B1},F,{atom,B2},F] when B1 =:= not B2 -> + Test = {test,is_boolean,{f,Fail},[Reg]}, + Jump = {jump,F}, + backward([Jump,Test|Is], D, Acc); + [_|_] -> + Sel = {select,select_val,Reg,{f,Fail},List}, + backward(Is, D, [Sel|Acc]) + end; backward([{jump,{f,To0}},{move,Src,Reg}=Move|Is], D, Acc) -> To = shortcut_select_label(To0, Reg, Src, D), Jump = {jump,{f,To}}, @@ -257,14 +272,17 @@ backward([{jump,{f,To}}=J|[{bif,Op,_,Ops,Reg}|Is]=Is0], D, Acc) -> catch throw:not_possible -> backward(Is0, D, [J|Acc]) end; -backward([{test,bs_start_match2,F,_,[R,_],Ctxt}=I|Is], D, +backward([{test,bs_start_match2,F,Live,[R,_]=Args,Ctxt}|Is], D, [{test,bs_match_string,F,[Ctxt,Bs]}, {test,bs_test_tail2,F,[Ctxt,0]}|Acc0]=Acc) -> + {f,To0} = F, + To = shortcut_bs_start_match(To0, R, D), case beam_utils:is_killed(Ctxt, Acc0, D) of true -> - Eq = {test,is_eq_exact,F,[R,{literal,Bs}]}, + Eq = {test,is_eq_exact,{f,To},[R,{literal,Bs}]}, backward(Is, D, [Eq|Acc0]); false -> + I = {test,bs_start_match2,{f,To},Live,Args,Ctxt}, backward(Is, D, [I|Acc]) end; backward([{test,bs_start_match2,{f,To0},Live,[Src|_]=Info,Dst}|Is], D, Acc) -> @@ -295,7 +313,28 @@ backward([{test,Op,{f,To0},Ops0}|Is], D, Acc) -> is_eq_exact -> combine_eqs(To, Ops0, D, Acc); _ -> {test,Op,{f,To},Ops0} end, - backward(Is, D, [I|Acc]); + case {I,Acc} of + {{test,is_atom,Fail,Ops0},[{test,is_boolean,Fail,Ops0}|_]} -> + %% An is_atom test before an is_boolean test (with the + %% same failure label) is redundant. + backward(Is, D, Acc); + {{test,is_atom,Fail,[R]}, + [{test,is_eq_exact,Fail,[R,{atom,_}]}|_]} -> + %% An is_atom test before a comparison with an atom (with + %% the same failure label) is redundant. + backward(Is, D, Acc); + {{test,is_integer,Fail,[R]}, + [{test,is_eq_exact,Fail,[R,{integer,_}]}|_]} -> + %% An is_integer test before a comparison with an integer + %% (with the same failure label) is redundant. + backward(Is, D, Acc); + {{test,_,_,_},_} -> + %% Still a test instruction. Done. + backward(Is, D, [I|Acc]); + {_,_} -> + %% Rewritten to a select_val. Rescan. + backward([I|Is], D, Acc) + end; backward([{test,Op,{f,To0},Live,Ops0,Dst}|Is], D, Acc) -> To1 = shortcut_bs_test(To0, Is, D), To2 = shortcut_label(To1, D), @@ -348,6 +387,12 @@ shortcut_label(To0, D) -> shortcut_select_label(To, Reg, Lit, D) -> shortcut_rel_op(To, is_ne_exact, [Reg,Lit], D). +prune_redundant([_,{f,Fail}|T], Fail) -> + prune_redundant(T, Fail); +prune_redundant([V,F|T], Fail) -> + [V,F|prune_redundant(T, Fail)]; +prune_redundant([], _) -> []. + %% Replace a comparison operator with a test instruction and a jump. %% For example, if we have this code: %% diff --git a/lib/compiler/src/beam_jump.erl b/lib/compiler/src/beam_jump.erl index 5e58e0f6ac..3b6eb19fe8 100644 --- a/lib/compiler/src/beam_jump.erl +++ b/lib/compiler/src/beam_jump.erl @@ -495,7 +495,7 @@ is_label_used_in_block({set,_,_,Info}, Lbl) -> {alloc,_,{gc_bif,_,{f,F}}} -> F =:= Lbl; {alloc,_,{put_map,_,{f,F}}} -> F =:= Lbl; {get_map_elements,{f,F}} -> F =:= Lbl; - {'catch',{f,F}} -> F =:= Lbl; + {try_catch,_,{f,F}} -> F =:= Lbl; {alloc,_,_} -> false; {put_tuple,_} -> false; {get_tuple_element,_} -> false; diff --git a/lib/compiler/src/beam_peep.erl b/lib/compiler/src/beam_peep.erl index 17fd2e502a..0c1abfe6a0 100644 --- a/lib/compiler/src/beam_peep.erl +++ b/lib/compiler/src/beam_peep.erl @@ -65,18 +65,6 @@ function({function,Name,Arity,CLabel,Is0}) -> %% InEncoding =:= latin1, OutEncoding =:= unicode; %% InEncoding =:= latin1, OutEncoding =:= utf8 -> %% -%% (2) A select_val/4 instruction that only verifies that -%% its argument is either 'true' or 'false' can be -%% be replaced with an is_boolean/2 instruction. That is: -%% -%% select_val Reg Fail [ true Next false Next ] -%% Next: ... -%% -%% can be rewritten to -%% -%% is_boolean Fail Reg -%% Next: ... -%% peep(Is) -> peep(Is, gb_sets:empty(), []). @@ -95,12 +83,16 @@ peep([{gc_bif,_,_,_,_,Dst}=I|Is], SeenTests0, Acc) -> %% Kill all remembered tests that depend on the destination register. SeenTests = kill_seen(Dst, SeenTests0), peep(Is, SeenTests, [I|Acc]); -peep([{test,is_boolean,{f,Fail},Ops}|_]=Is, SeenTests, - [{test,is_atom,{f,Fail},Ops}|Acc]) -> - %% The previous is_atom/2 test (with the same failure label) is redundant. - %% (If is_boolean(Src) is true, is_atom(Src) is also true, so it is - %% OK to still remember that we have seen is_atom/1.) - peep(Is, SeenTests, Acc); +peep([{select,Op,R,F,Vls0}|Is], _, Acc) -> + case prune_redundant_values(Vls0, F) of + [] -> + %% No values left. Must convert to plain jump. + I = {jump,F}, + peep(Is, gb_sets:empty(), [I|Acc]); + [_|_]=Vls -> + I = {select,Op,R,F,Vls}, + peep(Is, gb_sets:empty(), [I|Acc]) + end; peep([{test,Op,_,Ops}=I|Is], SeenTests0, Acc) -> case beam_utils:is_pure_test(I) of false -> @@ -121,16 +113,6 @@ peep([{test,Op,_,Ops}=I|Is], SeenTests0, Acc) -> peep(Is, SeenTests, [I|Acc]) end end; -peep([{select,select_val,Src,Fail, - [{atom,false},{f,L},{atom,true},{f,L}]}| - [{label,L}|_]=Is], SeenTests, Acc) -> - I = {test,is_boolean,Fail,[Src]}, - peep([I|Is], SeenTests, Acc); -peep([{select,select_val,Src,Fail, - [{atom,true},{f,L},{atom,false},{f,L}]}| - [{label,L}|_]=Is], SeenTests, Acc) -> - I = {test,is_boolean,Fail,[Src]}, - peep([I|Is], SeenTests, Acc); peep([I|Is], _, Acc) -> %% An unknown instruction. Throw away all information we %% have collected about test instructions. @@ -155,3 +137,9 @@ kill_seen_1([{_,Ops}=Test|T], Dst) -> false -> [Test|kill_seen_1(T, Dst)] end; kill_seen_1([], _) -> []. + +prune_redundant_values([_Val,F|Vls], F) -> + prune_redundant_values(Vls, F); +prune_redundant_values([Val,Lbl|Vls], F) -> + [Val,Lbl|prune_redundant_values(Vls, F)]; +prune_redundant_values([], _) -> []. diff --git a/lib/compiler/src/beam_reorder.erl b/lib/compiler/src/beam_reorder.erl new file mode 100644 index 0000000000..70adca6b04 --- /dev/null +++ b/lib/compiler/src/beam_reorder.erl @@ -0,0 +1,134 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 1999-2013. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +%% + +-module(beam_reorder). + +-export([module/2]). +-import(lists, [member/2,reverse/1]). + +module({Mod,Exp,Attr,Fs0,Lc}, _Opt) -> + Fs = [function(F) || F <- Fs0], + {ok,{Mod,Exp,Attr,Fs,Lc}}. + +function({function,Name,Arity,CLabel,Is0}) -> + try + Is = reorder(Is0), + {function,Name,Arity,CLabel,Is} + catch + Class:Error -> + Stack = erlang:get_stacktrace(), + io:fwrite("Function: ~w/~w\n", [Name,Arity]), + erlang:raise(Class, Error, Stack) + end. + +%% reorder(Instructions0) -> Instructions +%% Reorder instructions before the beam_block pass, because reordering +%% will be more cumbersome when the blocks are in place. +%% +%% Execution of get_tuple_element instructions can be delayed until +%% they are actually needed. Consider the sequence: +%% +%% get_tuple_element Tuple Pos Dst +%% test Test Fail Operands +%% +%% If Dst is killed at label Fail (and not referenced in Operands), +%% we can can swap the instructions: +%% +%% test Test Fail Operands +%% get_tuple_element Tuple Pos Dst +%% +%% That can be beneficial in two ways: Firstly, if the branch is taken +%% we have avoided execution of the get_tuple_element instruction. +%% Secondly, even if the branch is not taken, subsequent optimization +%% (opt_blocks/1) may be able to change Dst to the final destination +%% register and eliminate a 'move' instruction. + +reorder(Is) -> + D = beam_utils:index_labels(Is), + reorder_1(Is, D, []). + +reorder_1([{Op,_,_}=TryCatch|[I|Is]=Is0], D, Acc) + when Op =:= 'catch'; Op =:= 'try' -> + %% Don't allow 'try' or 'catch' instructions to split blocks if + %% it can be avoided. + case is_safe(I) of + false -> + reorder_1(Is0, D, [TryCatch|Acc]); + true -> + reorder_1([TryCatch|Is], D, [I|Acc]) + end; +reorder_1([{label,L}=I|_], D, Acc) -> + Is = beam_utils:code_at(L, D), + reorder_1(Is, D, [I|Acc]); +reorder_1([{test,is_nonempty_list,_,_}=I|Is], D, Acc) -> + %% The run-time system may combine the is_nonempty_list test with + %% the following get_list instruction. + reorder_1(Is, D, [I|Acc]); +reorder_1([{test,_,_,_}=I, + {select,_,_,_,_}=S|Is], D, Acc) -> + %% There is nothing to gain by inserting a get_tuple_element + %% instruction between the test instruction and the select + %% instruction. + reorder_1(Is, D, [S,I|Acc]); +reorder_1([{test,_,{f,L},Ss}=I|Is0], D0, + [{get_tuple_element,_,_,El}=G|Acc0]=Acc) -> + case member(El, Ss) of + true -> + reorder_1(Is0, D0, [I|Acc]); + false -> + case beam_utils:is_killed_at(El, L, D0) of + true -> + Is = [I,G|Is0], + reorder_1(Is, D0, Acc0); + false -> + case beam_utils:is_killed(El, Is0, D0) of + true -> + Code0 = beam_utils:code_at(L, D0), + Code = [G|Code0], + D = beam_utils:index_label(L, Code, D0), + Is = [I|Is0], + reorder_1(Is, D, Acc0); + false -> + reorder_1(Is0, D0, [I|Acc]) + end + end + end; +reorder_1([{allocate_zero,N,Live}|Is], D, + [{get_tuple_element,_,_,{x,X}}=G|Acc]) + when X+1 =:= Live -> + %% Move allocation instruction upwards past get_tuple_element + %% instructions to give more opportunities for moving + %% get_tuple_element instructions. + I = {allocate_zero,N,X}, + reorder_1([I,G|Is], D, Acc); +reorder_1([I|Is], D, Acc) -> + reorder_1(Is, D, [I|Acc]); +reorder_1([], _, Acc) -> reverse(Acc). + +%% is_safe(Instruction) -> true|false +%% Test whether an instruction is safe (cannot cause an exception). + +is_safe({kill,_}) -> true; +is_safe({move,_,_}) -> true; +is_safe({put,_}) -> true; +is_safe({put_list,_,_,_}) -> true; +is_safe({put_tuple,_,_}) -> true; +is_safe({test_heap,_,_}) -> true; +is_safe(_) -> false. diff --git a/lib/compiler/src/beam_split.erl b/lib/compiler/src/beam_split.erl index 3be9311080..bb1c0e23a9 100644 --- a/lib/compiler/src/beam_split.erl +++ b/lib/compiler/src/beam_split.erl @@ -57,8 +57,8 @@ split_block([{set,[D],[S|Puts],{alloc,R,{put_map,Op,{f,Lbl}=Fail}}}|Is], split_block([{set,Ds,[S|Ss],{get_map_elements,Fail}}|Is], Bl, Acc) -> Gets = beam_utils:join_even(Ss,Ds), split_block(Is, [], [{get_map_elements,Fail,S,{list,Gets}}|make_block(Bl, Acc)]); -split_block([{set,[R],[],{'catch',L}}|Is], Bl, Acc) -> - split_block(Is, [], [{'catch',R,L}|make_block(Bl, Acc)]); +split_block([{set,[R],[],{try_catch,Op,L}}|Is], Bl, Acc) -> + split_block(Is, [], [{Op,R,L}|make_block(Bl, Acc)]); split_block([{set,[],[],{line,_}=Line}|Is], Bl, Acc) -> split_block(Is, [], [Line|make_block(Bl, Acc)]); split_block([I|Is], Bl, Acc) -> diff --git a/lib/compiler/src/beam_type.erl b/lib/compiler/src/beam_type.erl index 5298589f83..4b45c28623 100644 --- a/lib/compiler/src/beam_type.erl +++ b/lib/compiler/src/beam_type.erl @@ -23,7 +23,8 @@ -export([module/2]). --import(lists, [foldl/3,reverse/1,filter/2]). +-import(lists, [filter/2,foldl/3,keyfind/3,member/2, + reverse/1,reverse/2,sort/1]). module({Mod,Exp,Attr,Fs0,Lc}, _Opts) -> Fs = [function(F) || F <- Fs0], @@ -92,8 +93,19 @@ simplify_basic_1([{set,[D],[TupleReg],{get_tuple_element,0}}=I|Is0], Ts0, Acc) - Ts = update(I, Ts0), simplify_basic_1(Is0, Ts, [I|Acc]) end; -simplify_basic_1([{set,_,_,{'catch',_}}=I|Is], _Ts, Acc) -> +simplify_basic_1([{set,_,_,{try_catch,_,_}}=I|Is], _Ts, Acc) -> simplify_basic_1(Is, tdb_new(), [I|Acc]); +simplify_basic_1([{test,is_atom,_,[R]}=I|Is], Ts, Acc) -> + case tdb_find(R, Ts) of + boolean -> simplify_basic_1(Is, Ts, Acc); + _ -> simplify_basic_1(Is, Ts, [I|Acc]) + end; +simplify_basic_1([{test,is_integer,_,[R]}=I|Is], Ts, Acc) -> + case tdb_find(R, Ts) of + integer -> simplify_basic_1(Is, Ts, Acc); + {integer,_} -> simplify_basic_1(Is, Ts, Acc); + _ -> simplify_basic_1(Is, Ts, [I|Acc]) + end; simplify_basic_1([{test,is_tuple,_,[R]}=I|Is], Ts, Acc) -> case tdb_find(R, Ts) of {tuple,_,_} -> simplify_basic_1(Is, Ts, Acc); @@ -137,6 +149,16 @@ simplify_basic_1([{test,is_record,_,[R,{atom,_}=Tag,{integer,Arity}]}=I|Is], Ts0 Ts = update(I, Ts0), simplify_basic_1(Is, Ts, [I|Acc]) end; +simplify_basic_1([{select,select_val,Reg,_,_}=I0|Is], Ts, Acc) -> + I = case tdb_find(Reg, Ts) of + {integer,Range} -> + simplify_select_val_int(I0, Range); + boolean -> + simplify_select_val_bool(I0); + _ -> + I0 + end, + simplify_basic_1(Is, tdb_new(), [I|Acc]); simplify_basic_1([I|Is], Ts0, Acc) -> Ts = update(I, Ts0), simplify_basic_1(Is, Ts, [I|Acc]); @@ -144,6 +166,32 @@ simplify_basic_1([], Ts, Acc) -> Is = reverse(Acc), {Is,Ts}. +simplify_select_val_int({select,select_val,R,_,L0}=I, {Min,Max}) -> + Vs = sort([V || {integer,V} <- L0]), + case eq_ranges(Vs, Min, Max) of + false -> I; + true -> simplify_select_val_1(L0, {integer,Max}, R, []) + end. + +simplify_select_val_bool({select,select_val,R,_,L}=I) -> + Vs = sort([V || {atom,V} <- L]), + case Vs of + [false,true] -> + simplify_select_val_1(L, {atom,false}, R, []); + _ -> + I + end. + +simplify_select_val_1([Val,F|T], Val, R, Acc) -> + L = reverse(Acc, T), + {select,select_val,R,F,L}; +simplify_select_val_1([V,F|T], Val, R, Acc) -> + simplify_select_val_1(T, Val, R, [F,V|Acc]). + +eq_ranges([H], H, H) -> true; +eq_ranges([H|T], H, Max) -> eq_ranges(T, H+1, Max); +eq_ranges(_, _, _) -> false. + %% simplify_float([Instruction], TypeDatabase) -> %% {[Instruction],TypeDatabase'} | not_possible %% Simplify floating point operations in blocks. @@ -199,7 +247,7 @@ simplify_float_1([{set,[D0],[A0,B0],{alloc,_,{gc_bif,Op0,{f,0}}}}=I|Is]=Is0, Ts = tdb_update([{D0,float}], Ts0), simplify_float_1(Is, Ts, Rs, Acc) end; -simplify_float_1([{set,_,_,{'catch',_}}=I|Is]=Is0, _Ts, Rs0, Acc0) -> +simplify_float_1([{set,_,_,{try_catch,_,_}}=I|Is]=Is0, _Ts, Rs0, Acc0) -> Acc = flush_all(Rs0, Is0, Acc0), simplify_float_1(Is, tdb_new(), Rs0, [I|Acc]); simplify_float_1([{set,_,_,{line,_}}=I|Is], Ts, Rs, Acc) -> @@ -311,7 +359,7 @@ flt_need_heap_2({set,_,_,{get_tuple_element,_}}, H, Fl) -> {[],H,Fl}; flt_need_heap_2({set,_,_,get_list}, H, Fl) -> {[],H,Fl}; -flt_need_heap_2({set,_,_,{'catch',_}}, H, Fl) -> +flt_need_heap_2({set,_,_,{try_catch,_,_}}, H, Fl) -> {[],H,Fl}; %% All other instructions should cause the insertion of an allocation %% instruction if needed. @@ -382,6 +430,17 @@ update({set,[D],[{integer,I},Reg],{bif,element,_}}, Ts0) -> tdb_update([{Reg,{tuple,I,[]}},{D,kill}], Ts0); update({set,[D],[_Index,Reg],{bif,element,_}}, Ts0) -> tdb_update([{Reg,{tuple,0,[]}},{D,kill}], Ts0); +update({set,[D],Args,{bif,N,_}}, Ts0) -> + Ar = length(Args), + BoolOp = erl_internal:new_type_test(N, Ar) orelse + erl_internal:comp_op(N, Ar) orelse + erl_internal:bool_op(N, Ar), + case BoolOp of + true -> + tdb_update([{D,boolean}], Ts0); + false -> + tdb_update([{D,kill}], Ts0) + end; update({set,[D],[S],{get_tuple_element,0}}, Ts) -> tdb_update([{D,{tuple_element,S,0}}], Ts); update({set,[D],[S],{alloc,_,{gc_bif,float,{f,0}}}}, Ts0) -> @@ -390,6 +449,13 @@ update({set,[D],[S],{alloc,_,{gc_bif,float,{f,0}}}}, Ts0) -> true -> tdb_update([{D,float}], Ts0); false -> Ts0 end; +update({set,[D],[S1,S2],{alloc,_,{gc_bif,'band',{f,0}}}}, Ts) -> + case keyfind(integer, 1, [S1,S2]) of + {integer,N} -> + update_band(N, D, Ts); + false -> + tdb_update([{D,integer}], Ts) + end; update({set,[D],[S1,S2],{alloc,_,{gc_bif,'/',{f,0}}}}, Ts0) -> %% Make sure we reject non-numeric literals. case possibly_numeric(S1) andalso possibly_numeric(S2) of @@ -397,15 +463,17 @@ update({set,[D],[S1,S2],{alloc,_,{gc_bif,'/',{f,0}}}}, Ts0) -> false -> Ts0 end; update({set,[D],[S1,S2],{alloc,_,{gc_bif,Op,{f,0}}}}, Ts0) -> - case arith_op(Op) of - no -> - tdb_update([{D,kill}], Ts0); - {yes,_} -> + case op_type(Op) of + integer -> + tdb_update([{D,integer}], Ts0); + {float,_} -> case {tdb_find(S1, Ts0),tdb_find(S2, Ts0)} of {float,_} -> tdb_update([{D,float}], Ts0); {_,float} -> tdb_update([{D,float}], Ts0); {_,_} -> tdb_update([{D,kill}], Ts0) - end + end; + unknown -> + tdb_update([{D,kill}], Ts0) end; update({set,[],_Src,_Op}, Ts0) -> Ts0; update({set,[D],_Src,_Op}, Ts0) -> @@ -437,6 +505,8 @@ update({test,is_record,_Fail,[Src,Tag,{integer,Arity}]}, Ts) -> tdb_update([{Src,{tuple,Arity,[Tag]}}], Ts); update({test,_Test,_Fail,_Other}, Ts) -> Ts; +update({test,bs_get_integer2,_,_,Args,Dst}, Ts) -> + tdb_update([{Dst,get_bs_integer_type(Args)}], Ts); update({call_ext,Ar,{extfunc,math,Math,Ar}}, Ts) -> case is_math_bif(Math, Ar) of true -> tdb_update([{{x,0},float}], Ts); @@ -453,10 +523,43 @@ update({call,_Arity,_Func}, Ts) -> tdb_kill_xregs(Ts); update({call_ext,_Arity,_Func}, Ts) -> tdb_kill_xregs(Ts); update({make_fun2,_,_,_,_}, Ts) -> tdb_kill_xregs(Ts); update({line,_}, Ts) -> Ts; +update({bs_save2,_,_}, Ts) -> Ts; +update({bs_restore2,_,_}, Ts) -> Ts; %% The instruction is unknown. Kill all information. update(_I, _Ts) -> tdb_new(). +update_band(N, Reg, Ts) -> + Type = update_band_1(N, 0), + tdb_update([{Reg,Type}], Ts). + +update_band_1(N, Bits) when Bits < 64 -> + case 1 bsl Bits of + P when P =:= N + 1 -> + {integer,{0,N}}; + P when P > N + 1 -> + integer; + _ -> + update_band_1(N, Bits+1) + end; +update_band_1(_, _) -> + %% Negative or large positive number. Give up. + integer. + +get_bs_integer_type([_,{integer,N},U,{field_flags,Fl}]) + when N*U < 64 -> + NumBits = N*U, + case member(unsigned, Fl) of + true -> + {integer,{0,(1 bsl NumBits)-1}}; + false -> + %% Signed integer. Don't bother. + integer + end; +get_bs_integer_type(_) -> + %% Avoid creating ranges with a huge upper limit. + integer. + is_math_bif(cos, 1) -> true; is_math_bif(cosh, 1) -> true; is_math_bif(sin, 1) -> true; @@ -545,11 +648,22 @@ load_reg(V, Ts, Rs0, Is0) -> {Rs,Is} end. -arith_op('+') -> {yes,fadd}; -arith_op('-') -> {yes,fsub}; -arith_op('*') -> {yes,fmul}; -arith_op('/') -> {yes,fdiv}; -arith_op(_) -> no. +arith_op(Op) -> + case op_type(Op) of + {float,Instr} -> {yes,Instr}; + _ -> no + end. + +op_type('+') -> {float,fadd}; +op_type('-') -> {float,fsub}; +op_type('*') -> {float,fmul}; +%% '/' and 'band' are specially handled. +op_type('bor') -> integer; +op_type('bxor') -> integer; +op_type('bsl') -> integer; +op_type('bsr') -> integer; +op_type('div') -> integer; +op_type(_) -> unknown. flush(Rs, [{set,[_],[],{put_tuple,_}}|_]=Is0, Acc0) -> Acc = flush_all(Rs, Is0, Acc0), @@ -618,7 +732,6 @@ checkerror(Is) -> checkerror_1(Is, Is). checkerror_1([{set,[],[],fcheckerror}|_], OrigIs) -> OrigIs; -checkerror_1([{set,[],[],fclearerror}|_], OrigIs) -> OrigIs; checkerror_1([{set,_,_,{bif,fadd,_}}|_], OrigIs) -> checkerror_2(OrigIs); checkerror_1([{set,_,_,{bif,fsub,_}}|_], OrigIs) -> checkerror_2(OrigIs); checkerror_1([{set,_,_,{bif,fmul,_}}|_], OrigIs) -> checkerror_2(OrigIs); @@ -640,6 +753,9 @@ checkerror_2(OrigIs) -> [{set,[],[],fcheckerror}|OrigIs]. %%% of the first element). %%% %%% 'float' means that the register contains a float. +%%% +%%% 'integer' or {integer,{Min,Max}} that the register contains an +%%% integer. %% tdb_new() -> EmptyDataBase %% Creates a new, empty type database. @@ -729,10 +845,20 @@ merge_type_info({tuple,Sz1,[]}, {tuple,_Sz2,First}=Tuple2) -> merge_type_info({tuple,Sz1,First}, Tuple2); merge_type_info({tuple,_Sz1,First}=Tuple1, {tuple,Sz2,_}) -> merge_type_info(Tuple1, {tuple,Sz2,First}); +merge_type_info(integer, {integer,_}=Int) -> + Int; +merge_type_info({integer,_}=Int, integer) -> + Int; +merge_type_info({integer,{Min1,Max1}}, {integer,{Min2,Max2}}) -> + {integer,{max(Min1, Min2),min(Max1, Max2)}}; merge_type_info(NewType, _) -> verify_type(NewType), NewType. +verify_type(boolean) -> ok; +verify_type(integer) -> ok; +verify_type({integer,{Min,Max}}) + when is_integer(Min), is_integer(Max) -> ok; verify_type(map) -> ok; verify_type(nonempty_list) -> ok; verify_type({tuple,Sz,[]}) when is_integer(Sz) -> ok; diff --git a/lib/compiler/src/beam_utils.erl b/lib/compiler/src/beam_utils.erl index fbcd5de1bb..68d6105cfa 100644 --- a/lib/compiler/src/beam_utils.erl +++ b/lib/compiler/src/beam_utils.erl @@ -484,6 +484,15 @@ check_liveness(R, [{get_map_elements,{f,Fail},S,{list,L}}|Is], St0) -> Other end end; +check_liveness(R, [{test_heap,N,Live}|Is], St) -> + I = {block,[{set,[],[],{alloc,Live,{nozero,nostack,N,[]}}}]}, + check_liveness(R, [I|Is], St); +check_liveness(R, [{allocate_zero,N,Live}|Is], St) -> + I = {block,[{set,[],[],{alloc,Live,{zero,N,0,[]}}}]}, + check_liveness(R, [I|Is], St); +check_liveness(R, [{get_list,S,D1,D2}|Is], St) -> + I = {block,[{set,[D1,D2],[S],get_list}]}, + check_liveness(R, [I|Is], St); check_liveness(_R, Is, St) when is_list(Is) -> %% case Is of %% [I|_] -> diff --git a/lib/compiler/src/beam_validator.erl b/lib/compiler/src/beam_validator.erl index 6004f1974e..cdace42a68 100644 --- a/lib/compiler/src/beam_validator.erl +++ b/lib/compiler/src/beam_validator.erl @@ -31,8 +31,6 @@ -import(lists, [reverse/1,foldl/3,foreach/2,dropwhile/2]). --define(MAXREG, 1024). - %%-define(DEBUG, 1). -ifdef(DEBUG). -define(DBG_FORMAT(F, D), (io:format((F), (D)))). @@ -980,9 +978,9 @@ get_fls(#vst{current=#st{fls=Fls}}) when is_atom(Fls) -> Fls. init_fregs() -> 0. -set_freg({fr,Fr}, #vst{current=#st{f=Fregs0}=St}=Vst) +set_freg({fr,Fr}=Freg, #vst{current=#st{f=Fregs0}=St}=Vst) when is_integer(Fr), 0 =< Fr -> - limit_check(Fr), + check_limit(Freg), Bit = 1 bsl Fr, if Fregs0 band Bit =:= 0 -> @@ -995,9 +993,10 @@ set_freg(Fr, _) -> error({bad_target,Fr}). assert_freg_set({fr,Fr}=Freg, #vst{current=#st{f=Fregs}}) when is_integer(Fr), 0 =< Fr -> if - Fregs band (1 bsl Fr) =/= 0 -> - limit_check(Fr); - true -> error({uninitialized_reg,Freg}) + (Fregs bsr Fr) band 1 =:= 0 -> + error({uninitialized_reg,Freg}); + true -> + ok end; assert_freg_set(Fr, _) -> error({bad_source,Fr}). @@ -1076,16 +1075,16 @@ set_type(Type, {x,_}=Reg, Vst) -> set_type_reg(Type, Reg, Vst); set_type(Type, {y,_}=Reg, Vst) -> set_type_y(Type, Reg, Vst); set_type(_, _, #vst{}=Vst) -> Vst. -set_type_reg(Type, {x,X}, #vst{current=#st{x=Xs}=St}=Vst) +set_type_reg(Type, {x,X}=Reg, #vst{current=#st{x=Xs}=St}=Vst) when is_integer(X), 0 =< X -> - limit_check(X), + check_limit(Reg), Vst#vst{current=St#st{x=gb_trees:enter(X, Type, Xs)}}; set_type_reg(Type, Reg, Vst) -> set_type_y(Type, Reg, Vst). set_type_y(Type, {y,Y}=Reg, #vst{current=#st{y=Ys0}=St}=Vst) when is_integer(Y), 0 =< Y -> - limit_check(Y), + check_limit(Reg), Ys = case gb_trees:lookup(Y, Ys0) of none -> error({invalid_store,Reg,Type}); @@ -1612,9 +1611,15 @@ return_type_math(pow, 2) -> {float,[]}; return_type_math(pi, 0) -> {float,[]}; return_type_math(F, A) when is_atom(F), is_integer(A), A >= 0 -> term. -limit_check(Num) when is_integer(Num), Num >= ?MAXREG -> - error(limit); -limit_check(_) -> ok. +check_limit({x,X}) when is_integer(X), X < 1023 -> + %% Note: x(1023) is reserved for use by the BEAM loader. + ok; +check_limit({y,Y}) when is_integer(Y), Y < 1024 -> + ok; +check_limit({fr,Fr}) when is_integer(Fr), Fr < 1024 -> + ok; +check_limit(_) -> + error(limit). min(A, B) when is_integer(A), is_integer(B), A < B -> A; min(A, B) when is_integer(A), is_integer(B) -> B. diff --git a/lib/compiler/src/compile.erl b/lib/compiler/src/compile.erl index e0a29fe9b1..a2a23a2b90 100644 --- a/lib/compiler/src/compile.erl +++ b/lib/compiler/src/compile.erl @@ -671,11 +671,16 @@ asm_passes() -> %% Assembly level optimisations. [{delay, [{pass,beam_a}, + {iff,da,{listing,"a"}}, {unless,no_postopt, - [{pass,beam_block}, + [{unless,no_reorder,{pass,beam_reorder}}, + {iff,dre,{listing,"reorder"}}, + {pass,beam_block}, {iff,dblk,{listing,"block"}}, {unless,no_except,{pass,beam_except}}, {iff,dexcept,{listing,"except"}}, + {unless,no_bs_opt,{pass,beam_bs}}, + {iff,dbs,{listing,"bs"}}, {unless,no_bopt,{pass,beam_bool}}, {iff,dbool,{listing,"bool"}}, {unless,no_topt,{pass,beam_type}}, @@ -703,6 +708,7 @@ asm_passes() -> {iff,no_postopt,[{pass,beam_clean}]}, {pass,beam_z}, + {iff,dz,{listing,"z"}}, {iff,dopt,{listing,"optimize"}}, {iff,'S',{listing,"S"}}, {iff,'to_asm',{done,"S"}}]}, diff --git a/lib/compiler/src/compiler.app.src b/lib/compiler/src/compiler.app.src index afb85f4710..a2b2a1d277 100644 --- a/lib/compiler/src/compiler.app.src +++ b/lib/compiler/src/compiler.app.src @@ -25,6 +25,7 @@ beam_asm, beam_block, beam_bool, + beam_bs, beam_bsm, beam_clean, beam_dead, @@ -37,6 +38,7 @@ beam_opcodes, beam_peep, beam_receive, + beam_reorder, beam_split, beam_trim, beam_type, diff --git a/lib/compiler/src/core_lib.erl b/lib/compiler/src/core_lib.erl index 3abb520485..839c736ff2 100644 --- a/lib/compiler/src/core_lib.erl +++ b/lib/compiler/src/core_lib.erl @@ -21,52 +21,16 @@ -module(core_lib). --deprecated({get_anno,1,next_major_release}). --deprecated({set_anno,2,next_major_release}). --deprecated({is_literal,1,next_major_release}). --deprecated({is_literal_list,1,next_major_release}). --deprecated({literal_value,1,next_major_release}). - --export([get_anno/1,set_anno/2]). --export([is_literal/1,is_literal_list/1]). --export([literal_value/1]). -export([make_values/1]). -export([is_var_used/2]). -include("core_parse.hrl"). -%% -%% Generic get/set annotation that should be used only with cerl() structures. -%% --spec get_anno(cerl:cerl()) -> term(). - -get_anno(C) -> cerl:get_ann(C). - --spec set_anno(cerl:cerl(), term()) -> cerl:cerl(). - -set_anno(C, A) -> cerl:set_ann(C, A). - --spec is_literal(cerl:cerl()) -> boolean(). - -is_literal(Cerl) -> - cerl:is_literal(cerl:fold_literal(Cerl)). - --spec is_literal_list([cerl:cerl()]) -> boolean(). - -is_literal_list(Es) -> lists:all(fun is_literal/1, Es). - -%% Return the value of LitExpr. --spec literal_value(cerl:c_literal() | cerl:c_binary() | - cerl:c_map() | cerl:c_cons() | cerl:c_tuple()) -> term(). - -literal_value(Cerl) -> - cerl:concrete(cerl:fold_literal(Cerl)). - %% Make a suitable values structure, expr or values, depending on Expr. -spec make_values([cerl:cerl()] | cerl:cerl()) -> cerl:cerl(). make_values([E]) -> E; -make_values([H|_]=Es) -> #c_values{anno=get_anno(H),es=Es}; +make_values([H|_]=Es) -> #c_values{anno=cerl:get_ann(H),es=Es}; make_values([]) -> #c_values{es=[]}; make_values(E) -> E. diff --git a/lib/compiler/src/sys_core_fold.erl b/lib/compiler/src/sys_core_fold.erl index 27d023d067..0a16776bd4 100644 --- a/lib/compiler/src/sys_core_fold.erl +++ b/lib/compiler/src/sys_core_fold.erl @@ -2793,12 +2793,18 @@ extract_type_1(Expr, Sub) -> true -> bool end. +returns_integer('band', [_,_]) -> true; +returns_integer('bnot', [_]) -> true; +returns_integer('bor', [_,_]) -> true; +returns_integer('bxor', [_,_]) -> true; returns_integer(bit_size, [_]) -> true; returns_integer('bsl', [_,_]) -> true; returns_integer('bsr', [_,_]) -> true; returns_integer(byte_size, [_]) -> true; +returns_integer('div', [_,_]) -> true; returns_integer(length, [_]) -> true; returns_integer('rem', [_,_]) -> true; +returns_integer('round', [_]) -> true; returns_integer(size, [_]) -> true; returns_integer(tuple_size, [_]) -> true; returns_integer(trunc, [_]) -> true; diff --git a/lib/compiler/src/v3_codegen.erl b/lib/compiler/src/v3_codegen.erl index 34c67b16ca..5083995f30 100644 --- a/lib/compiler/src/v3_codegen.erl +++ b/lib/compiler/src/v3_codegen.erl @@ -827,21 +827,24 @@ select_extract_bin([{var,Hd},{var,Tl}], Size0, Unit, Type, Flags, Vf, {bs_save2,CtxReg,{Ctx,Tl}}],Int1} end, {Es,clear_dead(Aft, I, Vdb),St}; -select_extract_bin([{var,Hd}], Size0, Unit, binary, Flags, Vf, +select_extract_bin([{var,Hd}], Size, Unit, binary, Flags, Vf, I, Vdb, Bef, Ctx, Body, St) -> - SizeReg = get_bin_size_reg(Size0, Bef), + %% Match the last segment of a binary. We KNOW that the size + %% must be 'all'. + Size = {atom,all}, %Assertion. {Es,Aft} = case vdb_find(Hd, Vdb) of {_,_,Lhd} when Lhd =< I -> + %% The result will not be used. Furthermore, since we + %% we are at the end of the binary, the position will + %% not be used again; thus, it is safe to do a cheaper + %% test of the unit. CtxReg = fetch_var(Ctx, Bef), - {case SizeReg =:= {atom,all} andalso is_context_unused(Body) of - true when Unit =:= 1 -> + {case Unit of + 1 -> []; - true -> - [{test,bs_test_unit,{f,Vf},[CtxReg,Unit]}]; - false -> - [{test,bs_skip_bits2,{f,Vf}, - [CtxReg,SizeReg,Unit,{field_flags,Flags}]}] + _ -> + [{test,bs_test_unit,{f,Vf},[CtxReg,Unit]}] end,Bef}; {_,_,_} -> case is_context_unused(Body) of @@ -853,7 +856,7 @@ select_extract_bin([{var,Hd}], Size0, Unit, binary, Flags, Vf, Name = bs_get_binary2, Live = max_reg(Bef#sr.reg), {[{test,Name,{f,Vf},Live, - [CtxReg,SizeReg,Unit,{field_flags,Flags}],Rhd}], + [CtxReg,Size,Unit,{field_flags,Flags}],Rhd}], Int1}; true -> %% Since the matching context will not be used again, @@ -868,7 +871,7 @@ select_extract_bin([{var,Hd}], Size0, Unit, binary, Flags, Vf, Name = bs_get_binary2, Live = max_reg(Int1#sr.reg), {[{test,Name,{f,Vf},Live, - [CtxReg,SizeReg,Unit,{field_flags,Flags}],CtxReg}], + [CtxReg,Size,Unit,{field_flags,Flags}],CtxReg}], Int1} end end, diff --git a/lib/compiler/src/v3_core.erl b/lib/compiler/src/v3_core.erl index 0941ad5dd5..7c229210a0 100644 --- a/lib/compiler/src/v3_core.erl +++ b/lib/compiler/src/v3_core.erl @@ -469,7 +469,8 @@ unforce_tree([#iset{var=#c_var{name=V},arg=Arg0}|Es], D0) -> unforce_tree(Es, D); unforce_tree([#icall{}=Call], D) -> unforce_tree_subst(Call, D); -unforce_tree([Top], _) -> Top. +unforce_tree([#c_var{name=V}], D) -> + gb_trees:get(V, D). unforce_tree_subst(#icall{module=#c_literal{val=erlang}, name=#c_literal{val='=:='}, diff --git a/lib/compiler/test/Makefile b/lib/compiler/test/Makefile index 6553d10077..0cd8618730 100644 --- a/lib/compiler/test/Makefile +++ b/lib/compiler/test/Makefile @@ -11,6 +11,7 @@ MODULES= \ beam_validator_SUITE \ beam_disasm_SUITE \ beam_except_SUITE \ + beam_type_SUITE \ beam_utils_SUITE \ bs_bincomp_SUITE \ bs_bit_binaries_SUITE \ @@ -43,6 +44,7 @@ NO_OPT= \ andor \ apply \ beam_except \ + beam_type \ beam_utils \ bs_construct \ bs_match \ diff --git a/lib/compiler/test/beam_type_SUITE.erl b/lib/compiler/test/beam_type_SUITE.erl new file mode 100644 index 0000000000..8d5c0190ed --- /dev/null +++ b/lib/compiler/test/beam_type_SUITE.erl @@ -0,0 +1,98 @@ +%% +%% %CopyrightBegin% +%% +%% Copyright Ericsson AB 2015. All Rights Reserved. +%% +%% Licensed under the Apache License, Version 2.0 (the "License"); +%% you may not use this file except in compliance with the License. +%% You may obtain a copy of the License at +%% +%% http://www.apache.org/licenses/LICENSE-2.0 +%% +%% Unless required by applicable law or agreed to in writing, software +%% distributed under the License is distributed on an "AS IS" BASIS, +%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +%% See the License for the specific language governing permissions and +%% limitations under the License. +%% +%% %CopyrightEnd% +%% +-module(beam_type_SUITE). + +-export([all/0,suite/0,groups/0,init_per_suite/1,end_per_suite/1, + init_per_group/2,end_per_group/2, + integers/1,coverage/1,booleans/1]). + +suite() -> [{ct_hooks,[ts_install_cth]}]. + +all() -> + test_lib:recompile(?MODULE), + [{group,p}]. + +groups() -> + [{p,[parallel], + [integers, + coverage, + booleans + ]}]. + +init_per_suite(Config) -> + Config. + +end_per_suite(_Config) -> + ok. + +init_per_group(_GroupName, Config) -> + Config. + +end_per_group(_GroupName, Config) -> + Config. + +integers(_Config) -> + a = do_integers_1(2#11000), + b = do_integers_1(2#11001), + + a = do_integers_2(<<0:1>>), + {'EXIT',{{case_clause,-1},_}} = (catch do_integers_2(<<1:1>>)), + + ok. + +do_integers_1(B0) -> + B = B0 band 1, + case B band 15 of + 0 -> a; + 1 -> b + end. + +do_integers_2(Bin) -> + <<B:1/signed>> = Bin, + case B of + 0 -> a; + 1 -> b + end. + +coverage(_Config) -> + {'EXIT',{badarith,_}} = (catch id(1) bsl 0.5), + {'EXIT',{badarith,_}} = (catch id(2.0) bsl 2), + {'EXIT',{badarith,_}} = (catch a + 0.5), + {'EXIT',{badarith,_}} = (catch 2.0 * b), + + {'EXIT',{badarith,_}} = (catch id(42.0) / (1 bsl 2000)), + + id(id(42) band 387439739874298734983787934283479243879), + id(-1 band id(13)), + + ok. + +booleans(_Config) -> + {'EXIT',{{case_clause,_},_}} = (catch do_booleans(42)), + ok. + +do_booleans(B) -> + case is_integer(B) of + yes -> yes; + no -> no + end. + +id(I) -> + I. diff --git a/lib/compiler/test/beam_validator_SUITE.erl b/lib/compiler/test/beam_validator_SUITE.erl index 69391b15eb..d6deb4a730 100644 --- a/lib/compiler/test/beam_validator_SUITE.erl +++ b/lib/compiler/test/beam_validator_SUITE.erl @@ -107,13 +107,13 @@ xrange(Config) when is_list(Config) -> {{bif,'+',{f,0},[{x,-1},{x,1}],{x,0}},4, {uninitialized_reg,{x,-1}}}}, {{t,sum_2,2}, - {{bif,'+',{f,0},[{x,0},{x,1024}],{x,0}},4, - {uninitialized_reg,{x,1024}}}}, + {{bif,'+',{f,0},[{x,0},{x,1023}],{x,0}},4, + {uninitialized_reg,{x,1023}}}}, {{t,sum_3,2}, {{bif,'+',{f,0},[{x,0},{x,1}],{x,-1}},4, {invalid_store,{x,-1},number}}}, {{t,sum_4,2}, - {{bif,'+',{f,0},[{x,0},{x,1}],{x,1024}},4,limit}}] = Errors, + {{bif,'+',{f,0},[{x,0},{x,1}],{x,1023}},4,limit}}] = Errors, ok. yrange(Config) when is_list(Config) -> diff --git a/lib/compiler/test/beam_validator_SUITE_data/xrange.S b/lib/compiler/test/beam_validator_SUITE_data/xrange.S index c6f20288f7..a76408dde3 100644 --- a/lib/compiler/test/beam_validator_SUITE_data/xrange.S +++ b/lib/compiler/test/beam_validator_SUITE_data/xrange.S @@ -20,7 +20,7 @@ {label,3}. {func_info,{atom,t},{atom,sum_2},2}. {label,4}. - {bif,'+',{f,0},[{x,0},{x,1024}],{x,0}}. + {bif,'+',{f,0},[{x,0},{x,1023}],{x,0}}. {'%live',1}. return. @@ -38,7 +38,7 @@ {label,7}. {func_info,{atom,t},{atom,sum_4},2}. {label,8}. - {bif,'+',{f,0},[{x,0},{x,1}],{x,1024}}. + {bif,'+',{f,0},[{x,0},{x,1}],{x,1023}}. {'%live',1}. return. diff --git a/lib/compiler/test/bs_match_SUITE.erl b/lib/compiler/test/bs_match_SUITE.erl index 6e138b0a43..a19b152bc5 100644 --- a/lib/compiler/test/bs_match_SUITE.erl +++ b/lib/compiler/test/bs_match_SUITE.erl @@ -36,7 +36,7 @@ match_string/1,zero_width/1,bad_size/1,haystack/1, cover_beam_bool/1,matched_out_size/1,follow_fail_branch/1, no_partition/1,calling_a_binary/1,binary_in_map/1, - match_string_opt/1]). + match_string_opt/1,select_on_integer/1]). -export([coverage_id/1,coverage_external_ignore/2]). @@ -62,7 +62,7 @@ groups() -> otp_7498,match_string,zero_width,bad_size,haystack, cover_beam_bool,matched_out_size,follow_fail_branch, no_partition,calling_a_binary,binary_in_map, - match_string_opt]}]. + match_string_opt,select_on_integer]}]. init_per_suite(Config) -> @@ -1225,6 +1225,20 @@ match_string_opt(Config) when is_list(Config) -> do_match_string_opt({<<1>>,{v,V}}=T) -> {x,V,T}. +select_on_integer(Config) when is_list(Config) -> + 42 = do_select_on_integer(<<42>>), + <<"abc">> = do_select_on_integer(<<128,"abc">>), + + {'EXIT',_} = (catch do_select_on_integer(<<0:1>>)), + {'EXIT',_} = (catch do_select_on_integer(<<1:1>>)), + {'EXIT',_} = (catch do_select_on_integer(<<0:1,0:15>>)), + ok. + +%% The ASN.1 compiler frequently generates code like this. +do_select_on_integer(<<0:1,I:7>>) -> + I; +do_select_on_integer(<<1:1,_:7,Bin/binary>>) -> + Bin. check(F, R) -> R = F(). diff --git a/lib/compiler/test/compile_SUITE.erl b/lib/compiler/test/compile_SUITE.erl index cbdd9ce8cd..806cb58bab 100644 --- a/lib/compiler/test/compile_SUITE.erl +++ b/lib/compiler/test/compile_SUITE.erl @@ -330,6 +330,8 @@ do_file_listings(DataDir, PrivDir, [File|Files]) -> do_listing(Simple, TargetDir, dlife, ".life"), do_listing(Simple, TargetDir, dcg, ".codegen"), do_listing(Simple, TargetDir, dblk, ".block"), + do_listing(Simple, TargetDir, dexcept, ".except"), + do_listing(Simple, TargetDir, dbs, ".bs"), do_listing(Simple, TargetDir, dbool, ".bool"), do_listing(Simple, TargetDir, dtype, ".type"), do_listing(Simple, TargetDir, ddead, ".dead"), diff --git a/lib/compiler/test/misc_SUITE.erl b/lib/compiler/test/misc_SUITE.erl index 8606935504..b88abaf62d 100644 --- a/lib/compiler/test/misc_SUITE.erl +++ b/lib/compiler/test/misc_SUITE.erl @@ -192,6 +192,14 @@ silly_coverage(Config) when is_list(Config) -> {label,2}|non_proper_list]}],99}, expect_error(fun() -> beam_a:module(BeamAInput, []) end), + %% beam_reorder + BlockInput = {?MODULE,[{foo,0}],[], + [{function,foo,0,2, + [{label,1}, + {func_info,{atom,?MODULE},{atom,foo},0}, + {label,2}|non_proper_list]}],99}, + expect_error(fun() -> beam_reorder:module(BlockInput, []) end), + %% beam_block BlockInput = {?MODULE,[{foo,0}],[], [{function,foo,0,2, @@ -200,6 +208,10 @@ silly_coverage(Config) when is_list(Config) -> {label,2}|non_proper_list]}],99}, ?line expect_error(fun() -> beam_block:module(BlockInput, []) end), + %% beam_bs + BsInput = BlockInput, + expect_error(fun() -> beam_bs:module(BsInput, []) end), + %% beam_type TypeInput = {?MODULE,[{foo,0}],[], [{function,foo,0,2, diff --git a/lib/crypto/Makefile b/lib/crypto/Makefile index 24db75bf91..fbf108c410 100644 --- a/lib/crypto/Makefile +++ b/lib/crypto/Makefile @@ -24,11 +24,7 @@ include $(ERL_TOP)/make/$(TARGET)/otp.mk # Macros # -ifneq ($(findstring ose,$(TARGET)),ose) SUB_DIRECTORIES = src c_src doc/src -else -SUB_DIRECTORIES = src doc/src -endif static_lib: SUB_DIRECTORIES = c_src include vsn.mk diff --git a/lib/crypto/c_src/Makefile.in b/lib/crypto/c_src/Makefile.in index e66c0ca916..e7f750b60a 100644 --- a/lib/crypto/c_src/Makefile.in +++ b/lib/crypto/c_src/Makefile.in @@ -127,12 +127,7 @@ ALL_STATIC_CFLAGS = $(DED_STATIC_CFLAGS) $(INCLUDES) _create_dirs := $(shell mkdir -p $(OBJDIR) $(LIBDIR)) -ifneq ($(findstring ose,$(TARGET)),ose) debug opt valgrind: $(NIF_LIB) $(CALLBACK_LIB) -else -# Do not build dynamic files on OSE -debug opt valgrind: -endif static_lib: $(NIF_ARCHIVE) @@ -203,14 +198,12 @@ release_spec: opt $(INSTALL_DIR) "$(RELSYSDIR)/priv/obj" $(INSTALL_DIR) "$(RELSYSDIR)/priv/lib" $(INSTALL_DATA) $(NIF_MAKEFILE) "$(RELSYSDIR)/priv/obj" -ifneq ($(findstring ose,$(TARGET)),ose) $(INSTALL_PROGRAM) $(CRYPTO_OBJS) "$(RELSYSDIR)/priv/obj" $(INSTALL_PROGRAM) $(NIF_LIB) "$(RELSYSDIR)/priv/lib" ifeq ($(DYNAMIC_CRYPTO_LIB),yes) $(INSTALL_PROGRAM) $(CALLBACK_OBJS) "$(RELSYSDIR)/priv/obj" $(INSTALL_PROGRAM) $(CALLBACK_LIB) "$(RELSYSDIR)/priv/lib" endif -endif release_docs_spec: diff --git a/lib/crypto/c_src/crypto.c b/lib/crypto/c_src/crypto.c index 9de8dc74c2..e9cac30c9c 100644 --- a/lib/crypto/c_src/crypto.c +++ b/lib/crypto/c_src/crypto.c @@ -507,47 +507,6 @@ static void hmac_context_dtor(ErlNifEnv* env, struct hmac_context*); #define PRINTF_ERR1(FMT,A1) #define PRINTF_ERR2(FMT,A1,A2) -#ifdef __OSE__ - -/* For crypto on OSE we have to initialize the crypto library on each - process that uses it. So since we do not know which scheduler is going - to execute the nif we have to check before each nif call that we have - initialized crypto in that process. */ - -#include "ose.h" -#include "openssl/osessl.h" - -static ErlNifTSDKey crypto_init_key; -static int check_ose_crypto(void); -static int init_ose_crypto(void); - -static int check_ose_crypto() { - int key = (int)enif_tsd_get(crypto_init_key); - if (!key) { - if (!CRYPTO_OSE5_init()) { - PRINTF_ERR0("CRYPTO: Call to CRYPTO_OSE5_init failed"); - return 0; - } - enif_tsd_set(crypto_init_key,1); - } - return 1; -} - -static int init_ose_crypto() { - /* Crypto nif upgrade does not work on OSE so no need to - destroy this key */ - enif_tsd_key_create("crypto_init_key", &crypto_init_key); - return check_ose_crypto(); -} - -#define INIT_OSE_CRYPTO() init_ose_crypto() -#define CHECK_OSE_CRYPTO() check_ose_crypto() -#else -#define INIT_OSE_CRYPTO() 1 -#define CHECK_OSE_CRYPTO() -#endif - - static int verify_lib_version(void) { const unsigned long libv = SSLeay(); @@ -609,9 +568,6 @@ static int init(ErlNifEnv* env, ERL_NIF_TERM load_info) ErlNifBinary lib_bin; char lib_buf[1000]; - if (!INIT_OSE_CRYPTO()) - return 0; - if (!verify_lib_version()) return 0; @@ -853,7 +809,6 @@ static ERL_NIF_TERM md5(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) {/* (Data) */ ErlNifBinary ibin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &ibin)) { return enif_make_badarg(env); } @@ -865,7 +820,6 @@ static ERL_NIF_TERM md5(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) static ERL_NIF_TERM md5_init(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) {/* () */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); MD5_Init((MD5_CTX *) enif_make_new_binary(env, MD5_CTX_LEN, &ret)); return ret; } @@ -874,7 +828,6 @@ static ERL_NIF_TERM md5_update(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv MD5_CTX* new_ctx; ErlNifBinary ctx_bin, data_bin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != MD5_CTX_LEN || !enif_inspect_iolist_as_binary(env, argv[1], &data_bin)) { @@ -891,7 +844,6 @@ static ERL_NIF_TERM md5_final(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[ ErlNifBinary ctx_bin; MD5_CTX ctx_clone; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != MD5_CTX_LEN) { return enif_make_badarg(env); } @@ -904,7 +856,6 @@ static ERL_NIF_TERM ripemd160(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[ {/* (Data) */ ErlNifBinary ibin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &ibin)) { return enif_make_badarg(env); } @@ -916,7 +867,6 @@ static ERL_NIF_TERM ripemd160(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[ static ERL_NIF_TERM ripemd160_init(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) {/* () */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); RIPEMD160_Init((RIPEMD160_CTX *) enif_make_new_binary(env, RIPEMD160_CTX_LEN, &ret)); return ret; } @@ -925,7 +875,6 @@ static ERL_NIF_TERM ripemd160_update(ErlNifEnv* env, int argc, const ERL_NIF_TER RIPEMD160_CTX* new_ctx; ErlNifBinary ctx_bin, data_bin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != RIPEMD160_CTX_LEN || !enif_inspect_iolist_as_binary(env, argv[1], &data_bin)) { @@ -942,7 +891,6 @@ static ERL_NIF_TERM ripemd160_final(ErlNifEnv* env, int argc, const ERL_NIF_TERM ErlNifBinary ctx_bin; RIPEMD160_CTX ctx_clone; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != RIPEMD160_CTX_LEN) { return enif_make_badarg(env); } @@ -956,7 +904,6 @@ static ERL_NIF_TERM sha(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) {/* (Data) */ ErlNifBinary ibin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &ibin)) { return enif_make_badarg(env); } @@ -968,7 +915,6 @@ static ERL_NIF_TERM sha(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) static ERL_NIF_TERM sha_init(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) {/* () */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); SHA1_Init((SHA_CTX *) enif_make_new_binary(env, SHA_CTX_LEN, &ret)); return ret; } @@ -977,7 +923,6 @@ static ERL_NIF_TERM sha_update(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv SHA_CTX* new_ctx; ErlNifBinary ctx_bin, data_bin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != SHA_CTX_LEN || !enif_inspect_iolist_as_binary(env, argv[1], &data_bin)) { return enif_make_badarg(env); @@ -993,7 +938,6 @@ static ERL_NIF_TERM sha_final(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[ ErlNifBinary ctx_bin; SHA_CTX ctx_clone; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != SHA_CTX_LEN) { return enif_make_badarg(env); } @@ -1007,7 +951,6 @@ static ERL_NIF_TERM sha224_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv #ifdef HAVE_SHA224 ErlNifBinary ibin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &ibin)) { return enif_make_badarg(env); } @@ -1023,7 +966,6 @@ static ERL_NIF_TERM sha224_init_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM {/* () */ #ifdef HAVE_SHA224 ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); SHA224_Init((SHA256_CTX *) enif_make_new_binary(env, sizeof(SHA256_CTX), &ret)); return ret; #else @@ -1036,7 +978,6 @@ static ERL_NIF_TERM sha224_update_nif(ErlNifEnv* env, int argc, const ERL_NIF_TE SHA256_CTX* new_ctx; ErlNifBinary ctx_bin, data_bin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != sizeof(SHA256_CTX) || !enif_inspect_iolist_as_binary(env, argv[1], &data_bin)) { return enif_make_badarg(env); @@ -1056,7 +997,6 @@ static ERL_NIF_TERM sha224_final_nif(ErlNifEnv* env, int argc, const ERL_NIF_TER ErlNifBinary ctx_bin; SHA256_CTX ctx_clone; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != sizeof(SHA256_CTX)) { return enif_make_badarg(env); } @@ -1073,7 +1013,6 @@ static ERL_NIF_TERM sha256_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv #ifdef HAVE_SHA256 ErlNifBinary ibin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &ibin)) { return enif_make_badarg(env); } @@ -1089,7 +1028,6 @@ static ERL_NIF_TERM sha256_init_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM {/* () */ #ifdef HAVE_SHA256 ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); SHA256_Init((SHA256_CTX *) enif_make_new_binary(env, sizeof(SHA256_CTX), &ret)); return ret; #else @@ -1102,7 +1040,6 @@ static ERL_NIF_TERM sha256_update_nif(ErlNifEnv* env, int argc, const ERL_NIF_TE SHA256_CTX* new_ctx; ErlNifBinary ctx_bin, data_bin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != sizeof(SHA256_CTX) || !enif_inspect_iolist_as_binary(env, argv[1], &data_bin)) { return enif_make_badarg(env); @@ -1122,7 +1059,6 @@ static ERL_NIF_TERM sha256_final_nif(ErlNifEnv* env, int argc, const ERL_NIF_TER ErlNifBinary ctx_bin; SHA256_CTX ctx_clone; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != sizeof(SHA256_CTX)) { return enif_make_badarg(env); } @@ -1139,7 +1075,6 @@ static ERL_NIF_TERM sha384_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv #ifdef HAVE_SHA384 ErlNifBinary ibin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &ibin)) { return enif_make_badarg(env); } @@ -1155,7 +1090,6 @@ static ERL_NIF_TERM sha384_init_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM {/* () */ #ifdef HAVE_SHA384 ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); SHA384_Init((SHA512_CTX *) enif_make_new_binary(env, sizeof(SHA512_CTX), &ret)); return ret; #else @@ -1168,7 +1102,6 @@ static ERL_NIF_TERM sha384_update_nif(ErlNifEnv* env, int argc, const ERL_NIF_TE SHA512_CTX* new_ctx; ErlNifBinary ctx_bin, data_bin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != sizeof(SHA512_CTX) || !enif_inspect_iolist_as_binary(env, argv[1], &data_bin)) { return enif_make_badarg(env); @@ -1188,7 +1121,6 @@ static ERL_NIF_TERM sha384_final_nif(ErlNifEnv* env, int argc, const ERL_NIF_TER ErlNifBinary ctx_bin; SHA512_CTX ctx_clone; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != sizeof(SHA512_CTX)) { return enif_make_badarg(env); } @@ -1205,7 +1137,6 @@ static ERL_NIF_TERM sha512_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv #ifdef HAVE_SHA512 ErlNifBinary ibin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &ibin)) { return enif_make_badarg(env); } @@ -1233,7 +1164,6 @@ static ERL_NIF_TERM sha512_update_nif(ErlNifEnv* env, int argc, const ERL_NIF_TE SHA512_CTX* new_ctx; ErlNifBinary ctx_bin, data_bin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != sizeof(SHA512_CTX) || !enif_inspect_iolist_as_binary(env, argv[1], &data_bin)) { return enif_make_badarg(env); @@ -1253,7 +1183,6 @@ static ERL_NIF_TERM sha512_final_nif(ErlNifEnv* env, int argc, const ERL_NIF_TER ErlNifBinary ctx_bin; SHA512_CTX ctx_clone; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != sizeof(SHA512_CTX)) { return enif_make_badarg(env); } @@ -1270,7 +1199,6 @@ static ERL_NIF_TERM md4(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) {/* (Data) */ ErlNifBinary ibin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &ibin)) { return enif_make_badarg(env); } @@ -1282,7 +1210,6 @@ static ERL_NIF_TERM md4(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) static ERL_NIF_TERM md4_init(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) {/* () */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); MD4_Init((MD4_CTX *) enif_make_new_binary(env, MD4_CTX_LEN, &ret)); return ret; } @@ -1291,7 +1218,6 @@ static ERL_NIF_TERM md4_update(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv MD4_CTX* new_ctx; ErlNifBinary ctx_bin, data_bin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != MD4_CTX_LEN || !enif_inspect_iolist_as_binary(env, argv[1], &data_bin)) { return enif_make_badarg(env); @@ -1307,7 +1233,6 @@ static ERL_NIF_TERM md4_final(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[ ErlNifBinary ctx_bin; MD4_CTX ctx_clone; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != MD4_CTX_LEN) { return enif_make_badarg(env); } @@ -1322,7 +1247,6 @@ static ERL_NIF_TERM md5_mac_n(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[ ErlNifBinary key, data; unsigned mac_sz; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || !enif_inspect_iolist_as_binary(env, argv[1], &data) || !enif_get_uint(env,argv[2],&mac_sz) || mac_sz > MD5_LEN) { @@ -1340,7 +1264,6 @@ static ERL_NIF_TERM sha_mac_n(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[ ErlNifBinary key, data; unsigned mac_sz; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || !enif_inspect_iolist_as_binary(env, argv[1], &data) || !enif_get_uint(env,argv[2],&mac_sz) || mac_sz > SHA_LEN) { @@ -1360,7 +1283,6 @@ static ERL_NIF_TERM sha224_mac_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM ErlNifBinary key, data; unsigned mac_sz; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || !enif_inspect_iolist_as_binary(env, argv[1], &data) || !enif_get_uint(env,argv[2],&mac_sz) || mac_sz > SHA224_DIGEST_LENGTH) { @@ -1383,7 +1305,6 @@ static ERL_NIF_TERM sha256_mac_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM ErlNifBinary key, data; unsigned mac_sz; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || !enif_inspect_iolist_as_binary(env, argv[1], &data) || !enif_get_uint(env,argv[2],&mac_sz) || mac_sz > SHA256_DIGEST_LENGTH) { @@ -1406,7 +1327,6 @@ static ERL_NIF_TERM sha384_mac_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM ErlNifBinary key, data; unsigned mac_sz; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || !enif_inspect_iolist_as_binary(env, argv[1], &data) || !enif_get_uint(env,argv[2],&mac_sz) || mac_sz > SHA384_DIGEST_LENGTH) { @@ -1430,7 +1350,6 @@ static ERL_NIF_TERM sha512_mac_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM ErlNifBinary key, data; unsigned mac_sz; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || !enif_inspect_iolist_as_binary(env, argv[1], &data) || !enif_get_uint(env,argv[2],&mac_sz) || mac_sz > SHA512_DIGEST_LENGTH) { @@ -1462,7 +1381,6 @@ static ERL_NIF_TERM hmac_init(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[ const EVP_MD *md; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (argv[0] == atom_sha) md = EVP_sha1(); #ifdef HAVE_SHA224 @@ -1502,7 +1420,6 @@ static ERL_NIF_TERM hmac_update(ErlNifEnv* env, int argc, const ERL_NIF_TERM arg ErlNifBinary data; struct hmac_context* obj; - CHECK_OSE_CRYPTO(); if (!enif_get_resource(env, argv[0], hmac_context_rtype, (void**)&obj) || !enif_inspect_iolist_as_binary(env, argv[1], &data)) { @@ -1529,7 +1446,6 @@ static ERL_NIF_TERM hmac_final(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv unsigned int req_len = 0; unsigned int mac_len; - CHECK_OSE_CRYPTO(); if (!enif_get_resource(env,argv[0],hmac_context_rtype, (void**)&obj) || (argc == 2 && !enif_get_uint(env, argv[1], &req_len))) { @@ -1564,7 +1480,6 @@ static ERL_NIF_TERM des_cbc_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM a DES_cblock ivec_clone; /* writable copy */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || key.size != 8 || !enif_inspect_binary(env, argv[1], &ivec) || ivec.size != 8 @@ -1587,7 +1502,6 @@ static ERL_NIF_TERM des_cfb_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM a DES_cblock ivec_clone; /* writable copy */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || key.size != 8 || !enif_inspect_binary(env, argv[1], &ivec) || ivec.size != 8 @@ -1607,7 +1521,6 @@ static ERL_NIF_TERM des_ecb_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM a ErlNifBinary key, text; DES_key_schedule schedule; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || key.size != 8 || !enif_inspect_iolist_as_binary(env, argv[1], &text) || text.size != 8) { return enif_make_badarg(env); @@ -1627,7 +1540,6 @@ static ERL_NIF_TERM des_ede3_cbc_crypt(ErlNifEnv* env, int argc, const ERL_NIF_T DES_cblock ivec_clone; /* writable copy */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key1) || key1.size != 8 || !enif_inspect_iolist_as_binary(env, argv[1], &key2) || key2.size != 8 @@ -1657,7 +1569,6 @@ static ERL_NIF_TERM des_ede3_cfb_crypt_nif(ErlNifEnv* env, int argc, const ERL_N DES_cblock ivec_clone; /* writable copy */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key1) || key1.size != 8 || !enif_inspect_iolist_as_binary(env, argv[1], &key2) || key2.size != 8 @@ -1714,7 +1625,6 @@ static ERL_NIF_TERM aes_cfb_128_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TE int new_ivlen = 0; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || !(key.size == 16 || key.size == 24 || key.size == 32) @@ -1744,7 +1654,6 @@ static ERL_NIF_TERM aes_ctr_encrypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM unsigned int num = 0; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || AES_set_encrypt_key(key.data, key.size*8, &aes_key) != 0 @@ -1777,7 +1686,6 @@ static ERL_NIF_TERM aes_ctr_stream_encrypt(ErlNifEnv* env, int argc, const ERL_N unsigned char * ivec2_buf; unsigned char * ecount2_buf; - CHECK_OSE_CRYPTO(); if (!enif_get_tuple(env, argv[0], &state_arity, &state_term) || state_arity != 4 @@ -1816,7 +1724,6 @@ static ERL_NIF_TERM aes_gcm_encrypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM unsigned char *outp; ERL_NIF_TERM out, out_tag; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || AES_set_encrypt_key(key.data, key.size*8, &aes_key) != 0 @@ -1866,7 +1773,6 @@ static ERL_NIF_TERM aes_gcm_decrypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM unsigned char *outp; ERL_NIF_TERM out; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || AES_set_encrypt_key(key.data, key.size*8, &aes_key) != 0 @@ -1937,7 +1843,6 @@ static ERL_NIF_TERM chacha20_poly1305_encrypt(ErlNifEnv* env, int argc, const ER unsigned char poly1305_key[32]; poly1305_state poly1305; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || key.size != 32 || !enif_inspect_binary(env, argv[1], &iv) || iv.size != CHACHA20_NONCE_LEN @@ -1991,7 +1896,6 @@ static ERL_NIF_TERM chacha20_poly1305_decrypt(ErlNifEnv* env, int argc, const ER unsigned char mac[POLY1305_TAG_LEN]; poly1305_state poly1305; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || key.size != 32 || !enif_inspect_binary(env, argv[1], &iv) || iv.size != CHACHA20_NONCE_LEN @@ -2045,7 +1949,6 @@ static ERL_NIF_TERM aes_ecb_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM a unsigned char* ret_ptr; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key_bin) || (key_bin.size != 16 && key_bin.size != 32) @@ -2074,7 +1977,6 @@ static ERL_NIF_TERM rand_bytes_1(ErlNifEnv* env, int argc, const ERL_NIF_TERM ar unsigned bytes; unsigned char* data; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_get_uint(env, argv[0], &bytes)) { return enif_make_badarg(env); } @@ -2088,7 +1990,6 @@ static ERL_NIF_TERM strong_rand_bytes_nif(ErlNifEnv* env, int argc, const ERL_NI unsigned bytes; unsigned char* data; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_get_uint(env, argv[0], &bytes)) { return enif_make_badarg(env); } @@ -2106,7 +2007,6 @@ static ERL_NIF_TERM rand_bytes_3(ErlNifEnv* env, int argc, const ERL_NIF_TERM ar unsigned char* data; unsigned top_mask, bot_mask; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_get_uint(env, argv[0], &bytes) || !enif_get_uint(env, argv[1], &top_mask) || !enif_get_uint(env, argv[2], &bot_mask)) { @@ -2130,7 +2030,6 @@ static ERL_NIF_TERM strong_rand_mpint_nif(ErlNifEnv* env, int argc, const ERL_NI unsigned dlen; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_get_uint(env, argv[0], &bits) || !enif_get_int(env, argv[1], &top) @@ -2200,7 +2099,6 @@ static ERL_NIF_TERM rand_uniform_nif(ErlNifEnv* env, int argc, const ERL_NIF_TER unsigned dlen; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!get_bn_from_mpint(env, argv[0], &bn_from) || !get_bn_from_mpint(env, argv[1], &bn_rand)) { @@ -2233,7 +2131,6 @@ static ERL_NIF_TERM mod_exp_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM arg unsigned extra_byte; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!get_bn_from_bin(env, argv[0], &bn_base) || !get_bn_from_bin(env, argv[1], &bn_exponent) @@ -2277,7 +2174,6 @@ static ERL_NIF_TERM dss_verify_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM DSA *dsa; int i; - CHECK_OSE_CRYPTO(); if (argv[0] == atom_sha) { if (enif_get_tuple(env, argv[1], &tpl_arity, &tpl_terms)) { @@ -2446,7 +2342,6 @@ static ERL_NIF_TERM rsa_verify_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM struct digest_type_t* digp = NULL; unsigned char* digest = NULL; - CHECK_OSE_CRYPTO(); digp = get_digest_type(type); if (!digp) { @@ -2508,7 +2403,6 @@ static ERL_NIF_TERM aes_cbc_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM a unsigned char* ret_ptr; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key_bin) || (key_bin.size != 16 && key_bin.size != 32) @@ -2569,7 +2463,6 @@ static ERL_NIF_TERM aes_ige_crypt_nif(ErlNifEnv* env, int argc, const ERL_NIF_TE unsigned char* ret_ptr; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key_bin) || (key_bin.size != 16 && key_bin.size != 32) @@ -2607,7 +2500,6 @@ static ERL_NIF_TERM do_exor(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) int i; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env,argv[0], &d1) || !enif_inspect_iolist_as_binary(env,argv[1], &d2) @@ -2629,7 +2521,6 @@ static ERL_NIF_TERM rc4_encrypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM arg RC4_KEY rc4_key; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env,argv[0], &key) || !enif_inspect_iolist_as_binary(env,argv[1], &data)) { @@ -2647,7 +2538,6 @@ static ERL_NIF_TERM rc4_set_key(ErlNifEnv* env, int argc, const ERL_NIF_TERM arg ErlNifBinary key; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env,argv[0], &key)) { return enif_make_badarg(env); @@ -2664,7 +2554,6 @@ static ERL_NIF_TERM rc4_encrypt_with_state(ErlNifEnv* env, int argc, const ERL_N RC4_KEY* rc4_key; ERL_NIF_TERM new_state, new_data; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env,argv[0], &state) || state.size != sizeof(RC4_KEY) @@ -2686,7 +2575,6 @@ static ERL_NIF_TERM rc2_cbc_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM a ERL_NIF_TERM ret; unsigned char iv_copy[8]; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key_bin) || (key_bin.size != 5 && key_bin.size != 8 && key_bin.size != 16) @@ -2748,7 +2636,6 @@ static ERL_NIF_TERM rsa_sign_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM ar struct digest_type_t *digp; unsigned char* digest; - CHECK_OSE_CRYPTO(); digp = get_digest_type(argv[0]); if (!digp) { @@ -2816,7 +2703,6 @@ static ERL_NIF_TERM dss_sign_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM ar DSA* dsa; int i; - CHECK_OSE_CRYPTO(); if (argv[0] == atom_sha) { if (enif_get_tuple(env, argv[1], &tpl_arity, &tpl_terms)) { @@ -2903,7 +2789,6 @@ static ERL_NIF_TERM rsa_public_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TER int padding, i; RSA* rsa; - CHECK_OSE_CRYPTO(); rsa = RSA_new(); @@ -2953,7 +2838,6 @@ static ERL_NIF_TERM rsa_private_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TE int padding, i; RSA* rsa; - CHECK_OSE_CRYPTO(); rsa = RSA_new(); @@ -3001,7 +2885,6 @@ static ERL_NIF_TERM dh_generate_parameters_nif(ErlNifEnv* env, int argc, const E unsigned char *p_ptr, *g_ptr; ERL_NIF_TERM ret_p, ret_g; - CHECK_OSE_CRYPTO(); if (!enif_get_int(env, argv[0], &prime_len) || !enif_get_int(env, argv[1], &generator)) { @@ -3030,7 +2913,6 @@ static ERL_NIF_TERM dh_check(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[] int i; ERL_NIF_TERM ret, head, tail; - CHECK_OSE_CRYPTO(); dh_params = DH_new(); @@ -3066,7 +2948,6 @@ static ERL_NIF_TERM dh_generate_key_nif(ErlNifEnv* env, int argc, const ERL_NIF_ ERL_NIF_TERM ret, ret_pub, ret_prv, head, tail; int mpint; /* 0 or 4 */ - CHECK_OSE_CRYPTO(); dh_params = DH_new(); @@ -3112,7 +2993,6 @@ static ERL_NIF_TERM dh_compute_key_nif(ErlNifEnv* env, int argc, const ERL_NIF_T ErlNifBinary ret_bin; ERL_NIF_TERM ret, head, tail; - CHECK_OSE_CRYPTO(); dh_params = DH_new(); @@ -3154,7 +3034,6 @@ static ERL_NIF_TERM srp_value_B_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM unsigned dlen; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!get_bn_from_bin(env, argv[0], &bn_multiplier) || !get_bn_from_bin(env, argv[1], &bn_verifier) @@ -3216,7 +3095,6 @@ static ERL_NIF_TERM srp_user_secret_nif(ErlNifEnv* env, int argc, const ERL_NIF_ unsigned dlen; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!get_bn_from_bin(env, argv[0], &bn_a) || !get_bn_from_bin(env, argv[1], &bn_u) @@ -3297,7 +3175,6 @@ static ERL_NIF_TERM srp_host_secret_nif(ErlNifEnv* env, int argc, const ERL_NIF_ unsigned dlen; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!get_bn_from_bin(env, argv[0], &bn_verifier) || !get_bn_from_bin(env, argv[1], &bn_b) @@ -3359,7 +3236,6 @@ static ERL_NIF_TERM bf_cfb64_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM int bf_n = 0; /* blowfish ivec pos */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key_bin) || !enif_inspect_binary(env, argv[1], &ivec_bin) @@ -3384,7 +3260,6 @@ static ERL_NIF_TERM bf_cbc_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM ar unsigned char bf_tkey[8]; /* blowfish ivec */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key_bin) || !enif_inspect_binary(env, argv[1], &ivec_bin) @@ -3409,7 +3284,6 @@ static ERL_NIF_TERM bf_ecb_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM ar BF_KEY bf_key; /* blowfish key 8 */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key_bin) || !enif_inspect_iolist_as_binary(env, argv[1], &data_bin) @@ -3431,7 +3305,6 @@ static ERL_NIF_TERM blowfish_ofb64_encrypt(ErlNifEnv* env, int argc, const ERL_N int bf_n = 0; /* blowfish ivec pos */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key_bin) || !enif_inspect_binary(env, argv[1], &ivec_bin) @@ -3756,7 +3629,6 @@ static ERL_NIF_TERM ec_key_generate(ErlNifEnv* env, int argc, const ERL_NIF_TERM ERL_NIF_TERM priv_key; ERL_NIF_TERM pub_key = atom_undefined; - CHECK_OSE_CRYPTO(); if (!get_ec_key(env, argv[0], argv[1], atom_undefined, &key)) goto badarg; @@ -3799,7 +3671,6 @@ static ERL_NIF_TERM ecdsa_sign_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM struct digest_type_t *digp; unsigned char* digest; - CHECK_OSE_CRYPTO(); digp = get_digest_type(argv[0]); if (!digp) { @@ -3868,7 +3739,6 @@ static ERL_NIF_TERM ecdsa_verify_nif(ErlNifEnv* env, int argc, const ERL_NIF_TER struct digest_type_t* digp = NULL; unsigned char* digest = NULL; - CHECK_OSE_CRYPTO(); digp = get_digest_type(type); if (!digp) { @@ -3933,7 +3803,6 @@ static ERL_NIF_TERM ecdh_compute_key_nif(ErlNifEnv* env, int argc, const ERL_NIF EC_POINT *my_ecpoint; EC_KEY *other_ecdh = NULL; - CHECK_OSE_CRYPTO(); if (!get_ec_key(env, argv[1], argv[2], atom_undefined, &key)) return enif_make_badarg(env); @@ -3978,7 +3847,6 @@ out_err: static ERL_NIF_TERM rand_seed_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) { ErlNifBinary seed_bin; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &seed_bin)) return enif_make_badarg(env); RAND_seed(seed_bin.data,seed_bin.size); diff --git a/lib/crypto/test/crypto_SUITE.erl b/lib/crypto/test/crypto_SUITE.erl index e84f5e1075..0b955c0965 100644 --- a/lib/crypto/test/crypto_SUITE.erl +++ b/lib/crypto/test/crypto_SUITE.erl @@ -118,10 +118,10 @@ init_per_suite(Config) -> _ -> Config catch error:low_entropy -> - %% Make sure we are on OSE, otherwise we want to crash - {ose,_} = os:type(), + %% We are testing on an OS with low entropy in its random + %% seed. So we have to seed it with a binary to get started. - %% This is NOT how you want to seed this, it is just here + %% This is NOT how you want to do seeding, it is just here %% to make the tests pass. Check your OS manual for how you %% really want to seed. {H,M,L} = erlang:now(), diff --git a/lib/debugger/src/dbg_iload.erl b/lib/debugger/src/dbg_iload.erl index 2a8bcd32d8..7746a06fcb 100644 --- a/lib/debugger/src/dbg_iload.erl +++ b/lib/debugger/src/dbg_iload.erl @@ -541,7 +541,7 @@ fun_clauses([]) -> []. new_map(Fs0, Anno, F) -> Line = ln(Anno), Fs1 = map_fields(Fs0, F), - Fs2 = [{ln(A),K,V} || {map_field_assoc,A,K,V} <- Fs1], + Fs2 = [{L,K,V} || {map_field_assoc,L,K,V} <- Fs1], try {value,Line,map_literal(Fs2, #{})} catch diff --git a/lib/dialyzer/test/r9c_SUITE_data/results/mnesia b/lib/dialyzer/test/r9c_SUITE_data/results/mnesia index b73943422a..1dc5a105bf 100644 --- a/lib/dialyzer/test/r9c_SUITE_data/results/mnesia +++ b/lib/dialyzer/test/r9c_SUITE_data/results/mnesia @@ -35,6 +35,6 @@ mnesia_schema.erl:1258: Guard test FromS::'disc_copies' | 'disc_only_copies' | ' mnesia_schema.erl:1639: The pattern {'false', 'mandatory'} can never match the type {'false','optional'} mnesia_schema.erl:2434: The variable Reason can never match since previous clauses completely covered the type {'error',_} | {'ok',_} mnesia_schema.erl:451: Guard test UseDirAnyway::'false' == 'true' can never succeed -mnesia_text.erl:180: The variable T can never match since previous clauses completely covered the type {'error',{integer(),atom() | tuple(),_}} | {'ok',_} +mnesia_text.erl:180: The variable T can never match since previous clauses completely covered the type {'error',{non_neg_integer(),atom() | tuple(),_}} | {'ok',_} mnesia_tm.erl:1522: Function commit_participant/5 has no local return mnesia_tm.erl:2169: Function system_terminate/4 has no local return diff --git a/lib/dialyzer/test/small_SUITE_data/src/big_external_type.erl b/lib/dialyzer/test/small_SUITE_data/src/big_external_type.erl index ab84e94106..9ad4810a5e 100644 --- a/lib/dialyzer/test/small_SUITE_data/src/big_external_type.erl +++ b/lib/dialyzer/test/small_SUITE_data/src/big_external_type.erl @@ -36,7 +36,7 @@ %% Start of Abstract Format --type line() :: erl_scan:line(). +-type line() :: erl_anno:line(). -export_type([af_record_index/0, af_record_field/1, af_record_name/0, af_field_name/0, af_function_decl/0]). @@ -332,8 +332,8 @@ %% End of Abstract Format -type error_description() :: term(). --type error_info() :: {erl_scan:line(), module(), error_description()}. --type token() :: {Tag :: atom(), Line :: erl_scan:line()}. +-type error_info() :: {erl_anno:line(), module(), error_description()}. +-type token() :: {Tag :: atom(), Line :: erl_scan:anno()}. %% mkop(Op, Arg) -> {op,Line,Op,Arg}. %% mkop(Left, Op, Right) -> {op,Line,Op,Left,Right}. diff --git a/lib/dialyzer/test/small_SUITE_data/src/big_local_type.erl b/lib/dialyzer/test/small_SUITE_data/src/big_local_type.erl index fc7c5241a8..fe567ff10d 100644 --- a/lib/dialyzer/test/small_SUITE_data/src/big_local_type.erl +++ b/lib/dialyzer/test/small_SUITE_data/src/big_local_type.erl @@ -36,7 +36,7 @@ %% Start of Abstract Format --type line() :: erl_scan:line(). +-type line() :: erl_anno:line(). -export_type([af_module/0, af_export/0, af_import/0, af_fa_list/0, af_compile/0, af_file/0, af_record_decl/0, @@ -329,8 +329,8 @@ %% End of Abstract Format -type error_description() :: term(). --type error_info() :: {erl_scan:line(), module(), error_description()}. --type token() :: {Tag :: atom(), Line :: erl_scan:line()}. +-type error_info() :: {erl_anno:line(), module(), error_description()}. +-type token() :: {Tag :: atom(), Line :: erl_anno:line()}. %% mkop(Op, Arg) -> {op,Line,Op,Arg}. %% mkop(Left, Op, Right) -> {op,Line,Op,Left,Right}. diff --git a/lib/eldap/src/eldap.erl b/lib/eldap/src/eldap.erl index ae47c815c9..df87ddde08 100644 --- a/lib/eldap/src/eldap.erl +++ b/lib/eldap/src/eldap.erl @@ -242,7 +242,7 @@ modify_dn(Handle, Entry, NewRDN, DelOldRDN, NewSup) %%% Sanity checks ! -bool_p(Bool) when Bool==true;Bool==false -> Bool. +bool_p(Bool) when is_boolean(Bool) -> Bool. optional([]) -> asn1_NOVALUE; optional(Value) -> Value. @@ -1022,10 +1022,13 @@ log(_, _, _, _) -> %%% Misc. routines %%% -------------------------------------------------------------------- -send(To,Msg) -> To ! {self(),Msg}. +send(To,Msg) -> + To ! {self(), Msg}, + ok. + recv(From) -> receive - {From,Msg} -> Msg; + {From, Msg} -> Msg; {'EXIT', From, Reason} -> {error, {internal_error, Reason}} end. diff --git a/lib/erl_docgen/priv/css/otp_doc.css b/lib/erl_docgen/priv/css/otp_doc.css index 0b531db701..347782eb1e 100644 --- a/lib/erl_docgen/priv/css/otp_doc.css +++ b/lib/erl_docgen/priv/css/otp_doc.css @@ -37,7 +37,7 @@ a:visited { color: blue; text-decoration: none } top: 0; bottom: 0; left: 0; - width: 200px; + width: 300px; overflow:auto; margin: 0; padding: 1px; @@ -45,7 +45,7 @@ a:visited { color: blue; text-decoration: none } } #content { - margin-left: 240px; /* set left value to WidthOfFrameDiv */ + margin-left: 340px; /* set left value to WidthOfFrameDiv */ } .frontpage diff --git a/lib/erl_interface/src/Makefile.in b/lib/erl_interface/src/Makefile.in index 777d709b1e..d6176ec053 100644 --- a/lib/erl_interface/src/Makefile.in +++ b/lib/erl_interface/src/Makefile.in @@ -126,11 +126,7 @@ else WARNFLAGS = @WFLAGS@ endif -ifneq ($(findstring ose,$(TARGET)),ose) CFLAGS = @LIB_CFLAGS@ $(WARNFLAGS) $(INCFLAGS) $(TYPE_FLAGS) -else -CFLAGS = @CFLAGS@ $(INCFLAGS) -endif PROG_CFLAGS = @CFLAGS@ $(WARNFLAGS) $(INCFLAGS) $(TYPE_FLAGS) -Ilegacy ifeq ($(findstring vxworks,$(TARGET)),vxworks) @@ -210,12 +206,8 @@ MDD_ERLLIB = $(OBJDIR)/$(LIBPRE)erl_interface_mdd$(LIBEXT) # Specify targets to build ########################################################################### -ifneq ($(findstring ose,$(TARGET)),ose) EXE_TARGETS = \ $(ERL_CALL) -else -EXE_TARGETS = -endif ifeq ($(USING_VC),yes) @@ -480,44 +472,6 @@ ERLSOURCES = \ SOURCES = $(EISOURCES) $(ERLSOURCES) -OSE_EISOURCES = \ - $(DECODESRC) \ - $(ENCODESRC) \ - misc/ei_decode_term.c \ - misc/ei_format.c \ - misc/ei_locking.c \ - misc/ei_malloc.c \ - misc/ei_printterm.c \ - misc/ei_pthreads.c \ - misc/ei_trace.c \ - misc/ei_x_encode.c \ - misc/eimd5.c \ - misc/get_type.c \ - misc/show_msg.c \ - misc/ei_compat.c \ - registry/hash_dohash.c \ - registry/hash_foreach.c \ - registry/hash_freetab.c \ - registry/hash_insert.c \ - registry/hash_isprime.c \ - registry/hash_lookup.c \ - registry/hash_newtab.c \ - registry/hash_remove.c \ - registry/hash_resize.c \ - registry/hash_rlookup.c - -OSE_ERLSOURCES = \ - legacy/decode_term.c \ - legacy/encode_term.c \ - legacy/erl_error.c \ - legacy/erl_eterm.c \ - legacy/erl_fix_alloc.c \ - legacy/erl_format.c \ - legacy/erl_malloc.c \ - legacy/erl_marshal.c - -OSE_SOURCES = $(OSE_EISOURCES) $(OSE_ERLSOURCES) - NEVERUSED = \ whereis.c \ ei_send.c \ @@ -532,13 +486,8 @@ ERLCALL = \ # Note that encode/decode_term.c defines ei functions that is # located in the erl_interface library, not ei library. -ifneq ($(findstring ose,$(TARGET)),ose) ST_EIOBJECTS = $(addprefix $(ST_OBJDIR)/,$(notdir $(EISOURCES:.c=.o))) ST_ERLOBJECTS = $(addprefix $(ST_OBJDIR)/,$(notdir $(ERLSOURCES:.c=.o))) -else -ST_EIOBJECTS = $(addprefix $(ST_OBJDIR)/,$(notdir $(OSE_EISOURCES:.c=.o))) -ST_ERLOBJECTS = $(addprefix $(ST_OBJDIR)/,$(notdir $(OSE_ERLSOURCES:.c=.o))) -endif MT_EIOBJECTS = $(addprefix $(MT_OBJDIR)/,$(notdir $(EISOURCES:.c=.o))) MT_ERLOBJECTS = $(addprefix $(MT_OBJDIR)/,$(notdir $(ERLSOURCES:.c=.o))) MD_EIOBJECTS = $(addprefix $(MD_OBJDIR)/,$(notdir $(EISOURCES:.c=.o))) @@ -587,14 +536,6 @@ $(TARGET)/config.h: $(V_at)echo "#define HAVE_SOCKLEN_T 1" >> $@ endif -ifeq ($(findstring ose,$(TARGET)),ose) -$(TARGET)/config.h: - $(gen_verbose) - $(V_at)echo "/* Generated by Makefile */" > $@ - $(V_at)echo "#define HAVE_STRERROR 1" >> $@ - $(V_at)echo "#define HAVE_SOCKLEN_T 1" >> $@ -endif - ########################################################################### # Default rules, normal and threaded ########################################################################### @@ -719,9 +660,6 @@ $(ST_OBJDIR)/erl_start.o: prog/erl_start.c $(V_CC) $(CFLAGS) -c $< -o $@ else -ifeq ($(findstring ose,$(TARGET)),ose) -$(ERL_CALL): -else ifdef THR_DEFS $(ERL_CALL): $(ERLCALL) ../include/ei.h $(MT_EILIB) $(ld_verbose)$(PURIFY) $(CC) $(PROG_CFLAGS) $(THR_DEFS) $(LDFLAGS) -o $@ $(ERLCALL) \ @@ -733,7 +671,6 @@ $(ERL_CALL): $(ERLCALL) ../include/ei.h $(ST_EILIB) endif endif endif -endif ########################################################################### # Fake application targets used to test header files and linking diff --git a/lib/hipe/cerl/erl_bif_types.erl b/lib/hipe/cerl/erl_bif_types.erl index 5387edfb47..b1f1689d9c 100644 --- a/lib/hipe/cerl/erl_bif_types.erl +++ b/lib/hipe/cerl/erl_bif_types.erl @@ -914,8 +914,7 @@ type(erlang, system_info, 1, Xs, Opaques) -> t_list(t_pid()); ['os_type'] -> t_tuple([t_sup([t_atom('unix'), - t_atom('win32'), - t_atom('ose')]), + t_atom('win32')]), t_atom()]); ['os_version'] -> t_sup(t_tuple([t_non_neg_fixnum(), diff --git a/lib/kernel/doc/src/notes.xml b/lib/kernel/doc/src/notes.xml index 76db0c201f..ccddf003f7 100644 --- a/lib/kernel/doc/src/notes.xml +++ b/lib/kernel/doc/src/notes.xml @@ -449,8 +449,7 @@ Erlang/OTP has been ported to the realtime operating system OSE. The port supports both smp and non-smp emulator. For details around the port and how to started - see the User's Guide in the <seealso - marker="ose:ose_intro">ose</seealso> application. </p> + see the User's Guide in the ose application. </p> <p> Note that not all parts of Erlang/OTP has been ported. </p> <p> diff --git a/lib/kernel/doc/src/ref_man.xml.src b/lib/kernel/doc/src/ref_man.xml.src deleted file mode 100644 index 7eb48a5f1d..0000000000 --- a/lib/kernel/doc/src/ref_man.xml.src +++ /dev/null @@ -1,68 +0,0 @@ -<?xml version="1.0" encoding="utf-8" ?> -<!DOCTYPE application SYSTEM "application.dtd"> - -<application xmlns:xi="http://www.w3.org/2001/XInclude"> - <header> - <copyright> - <year>1996</year><year>2013</year> - <holder>Ericsson AB. All Rights Reserved.</holder> - </copyright> - <legalnotice> - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - - </legalnotice> - - <title>Kernel Reference Manual</title> - <prepared></prepared> - <docno></docno> - <date></date> - <rev></rev> - </header> - <description> - <p>The <em>Kernel</em> application has all the code necessary to run - the Erlang runtime system itself: file servers and code servers - and so on.</p> - </description> - <xi:include href="kernel_app.xml"/> - <xi:include href="application.xml"/> - <xi:include href="auth.xml"/> - <xi:include href="code.xml"/> - <xi:include href="disk_log.xml"/> - <xi:include href="erl_boot_server.xml"/> - <xi:include href="erl_ddll.xml"/> - <xi:include href="erl_prim_loader_stub.xml"/> - <xi:include href="erlang_stub.xml"/> - <xi:include href="error_handler.xml"/> - <xi:include href="error_logger.xml"/> - <xi:include href="file.xml"/> - <xi:include href="gen_tcp.xml"/> - <xi:include href="gen_udp.xml"/> - <xi:include href="gen_sctp.xml"/> - <xi:include href="global.xml"/> - <xi:include href="global_group.xml"/> - <xi:include href="heart.xml"/> - <xi:include href="inet.xml"/> - <xi:include href="inet_res.xml"/> - <xi:include href="init_stub.xml"/> - <xi:include href="net_adm.xml"/> - <xi:include href="net_kernel.xml"/> - <xi:include href="os.xml"/> - <xi:include href="pg2.xml"/> - <xi:include href="rpc.xml"/> - <xi:include href="seq_trace.xml"/> - <xi:include href="user.xml"/> - <xi:include href="wrap_log_reader.xml"/> - <xi:include href="zlib_stub.xml"/> - <xi:include href="app.xml"/> - <xi:include href="config.xml"/> -</application> diff --git a/lib/kernel/src/inet_config.erl b/lib/kernel/src/inet_config.erl index 803fae846e..a0d5344f11 100644 --- a/lib/kernel/src/inet_config.erl +++ b/lib/kernel/src/inet_config.erl @@ -188,9 +188,6 @@ do_load_resolv({win32,Type}, longnames) -> win32_load_from_registry(Type), inet_db:set_lookup([native]); -do_load_resolv({ose,_}, _) -> - inet_db:set_lookup([file]); - do_load_resolv(_, _) -> inet_db:set_lookup([native]). diff --git a/lib/kernel/src/os.erl b/lib/kernel/src/os.erl index 3330b38d84..ffb899e5ca 100644 --- a/lib/kernel/src/os.erl +++ b/lib/kernel/src/os.erl @@ -93,7 +93,7 @@ unsetenv(_) -> %%% End of BIFs -spec type() -> {Osfamily, Osname} when - Osfamily :: unix | win32 | ose, + Osfamily :: unix | win32, Osname :: atom(). type() -> diff --git a/lib/kernel/test/erl_prim_loader_SUITE.erl b/lib/kernel/test/erl_prim_loader_SUITE.erl index 0803cf428f..ffcde5e458 100644 --- a/lib/kernel/test/erl_prim_loader_SUITE.erl +++ b/lib/kernel/test/erl_prim_loader_SUITE.erl @@ -260,46 +260,41 @@ multiple_slaves(doc) -> ["Start nodes in parallell, all using the 'inet' loading method, ", "verify that the boot server manages"]; multiple_slaves(Config) when is_list(Config) -> - case os:type() of - {ose,_} -> - {comment, "OSE: multiple nodes not supported"}; - _ -> - ?line Name = erl_prim_test_multiple_slaves, - ?line Host = host(), - ?line Cookie = atom_to_list(erlang:get_cookie()), - ?line IpStr = ip_str(Host), - ?line LFlag = get_loader_flag(os:type()), - ?line Args = LFlag ++ " -hosts " ++ IpStr ++ - " -setcookie " ++ Cookie, - - NoOfNodes = 10, % no of slave nodes to be started - - NamesAndNodes = - lists:map(fun(N) -> - NameN = atom_to_list(Name) ++ - integer_to_list(N), - NodeN = NameN ++ "@" ++ Host, - {list_to_atom(NameN),list_to_atom(NodeN)} - end, lists:seq(1, NoOfNodes)), - - ?line Nodes = start_multiple_nodes(NamesAndNodes, Args, []), - - %% "queue up" the nodes to wait for the boot server to respond - %% (note: test_server supervises each node start by accept() - %% on a socket, the timeout value for the accept has to be quite - %% long for this test to work). - ?line test_server:sleep(test_server:seconds(5)), - %% start the code loading circus! - ?line {ok,BootPid} = erl_boot_server:start_link([Host]), - %% give the nodes a chance to boot up before attempting to stop them - ?line test_server:sleep(test_server:seconds(10)), + ?line Name = erl_prim_test_multiple_slaves, + ?line Host = host(), + ?line Cookie = atom_to_list(erlang:get_cookie()), + ?line IpStr = ip_str(Host), + ?line LFlag = get_loader_flag(os:type()), + ?line Args = LFlag ++ " -hosts " ++ IpStr ++ + " -setcookie " ++ Cookie, + + NoOfNodes = 10, % no of slave nodes to be started + + NamesAndNodes = + lists:map(fun(N) -> + NameN = atom_to_list(Name) ++ + integer_to_list(N), + NodeN = NameN ++ "@" ++ Host, + {list_to_atom(NameN),list_to_atom(NodeN)} + end, lists:seq(1, NoOfNodes)), + + ?line Nodes = start_multiple_nodes(NamesAndNodes, Args, []), + + %% "queue up" the nodes to wait for the boot server to respond + %% (note: test_server supervises each node start by accept() + %% on a socket, the timeout value for the accept has to be quite + %% long for this test to work). + ?line test_server:sleep(test_server:seconds(5)), + %% start the code loading circus! + ?line {ok,BootPid} = erl_boot_server:start_link([Host]), + %% give the nodes a chance to boot up before attempting to stop them + ?line test_server:sleep(test_server:seconds(10)), - ?line wait_and_shutdown(lists:reverse(Nodes), 30), + ?line wait_and_shutdown(lists:reverse(Nodes), 30), - ?line unlink(BootPid), - ?line exit(BootPid, kill), - ok - end. + ?line unlink(BootPid), + ?line exit(BootPid, kill), + ok. start_multiple_nodes([{Name,Node} | NNs], Args, Started) -> ?line {ok,Node} = start_node(Name, Args, [{wait, false}]), diff --git a/lib/kernel/test/file_SUITE.erl b/lib/kernel/test/file_SUITE.erl index 8856be31c2..5263130574 100644 --- a/lib/kernel/test/file_SUITE.erl +++ b/lib/kernel/test/file_SUITE.erl @@ -167,12 +167,7 @@ init_per_suite(Config) when is_list(Config) -> ok -> [{sasl,started}] end, - ok = case os:type() of - {ose,_} -> - ok; - _ -> - application:start(os_mon) - end, + application:start(os_mon), case os:type() of {win32, _} -> @@ -198,12 +193,7 @@ end_per_suite(Config) when is_list(Config) -> ok end, - case os:type() of - {ose,_} -> - ok; - _ -> - application:stop(os_mon) - end, + application:stop(os_mon), case proplists:get_value(sasl, Config) of started -> application:stop(sasl); @@ -888,10 +878,7 @@ open1(Config) when is_list(Config) -> ?line io:format(Fd1,Str,[]), ?line {ok,0} = ?FILE_MODULE:position(Fd1,bof), ?line Str = io:get_line(Fd1,''), - ?line case io:get_line(Fd2,'') of - Str -> Str; - eof -> Str - end, + ?line Str = io:get_line(Fd2,''), ?line ok = ?FILE_MODULE:close(Fd2), ?line {ok,0} = ?FILE_MODULE:position(Fd1,bof), ?line ok = ?FILE_MODULE:truncate(Fd1), @@ -2346,9 +2333,6 @@ e_rename(Config) when is_list(Config) -> %% At least Windows NT can %% successfully move a file to %% another drive. - ok; - {ose, _} -> - %% disabled for now ok end, [] = flush(), diff --git a/lib/kernel/test/gen_tcp_misc_SUITE.erl b/lib/kernel/test/gen_tcp_misc_SUITE.erl index 81c6dcd0fd..3adca83ec9 100644 --- a/lib/kernel/test/gen_tcp_misc_SUITE.erl +++ b/lib/kernel/test/gen_tcp_misc_SUITE.erl @@ -58,14 +58,6 @@ oct_acceptor/1, otp_7731_server/1, zombie_server/2, do_iter_max_socks/2]). -init_per_testcase(wrapping_oct, Config) when is_list(Config) -> - Dog = case os:type() of - {ose,_} -> - test_server:timetrap(test_server:minutes(20)); - _Else -> - test_server:timetrap(test_server:seconds(600)) - end, - [{watchdog, Dog}|Config]; init_per_testcase(iter_max_socks, Config) when is_list(Config) -> Dog = case os:type() of {win32,_} -> @@ -74,14 +66,6 @@ init_per_testcase(iter_max_socks, Config) when is_list(Config) -> test_server:timetrap(test_server:seconds(240)) end, [{watchdog, Dog}|Config]; -init_per_testcase(accept_system_limit, Config) when is_list(Config) -> - case os:type() of - {ose,_} -> - {skip,"Skip in OSE"}; - _ -> - Dog = test_server:timetrap(test_server:seconds(240)), - [{watchdog,Dog}|Config] - end; init_per_testcase(wrapping_oct, Config) when is_list(Config) -> Dog = test_server:timetrap(test_server:seconds(600)), [{watchdog, Dog}|Config]; diff --git a/lib/kernel/test/prim_file_SUITE.erl b/lib/kernel/test/prim_file_SUITE.erl index 3e6d8492f7..366231d2cc 100644 --- a/lib/kernel/test/prim_file_SUITE.erl +++ b/lib/kernel/test/prim_file_SUITE.erl @@ -455,10 +455,7 @@ open1(Config) when is_list(Config) -> ?line ?PRIM_FILE:write(Fd1,Str), ?line {ok,0} = ?PRIM_FILE:position(Fd1,bof), ?line {ok, Str} = ?PRIM_FILE:read(Fd1,Length), - ?line case ?PRIM_FILE:read(Fd2,Length) of - {ok,Str} -> Str; - eof -> Str - end, + ?line {ok, Str} = ?PRIM_FILE:read(Fd2,Length), ?line ok = ?PRIM_FILE:close(Fd2), ?line {ok,0} = ?PRIM_FILE:position(Fd1,bof), ?line ok = ?PRIM_FILE:truncate(Fd1), @@ -1629,7 +1626,7 @@ e_rename(Config) when is_list(Config) -> %% successfully move a file to %% another drive. ok; - {unix, _ } -> + _ -> OtherFs = "/tmp", ?line NameOnOtherFs = filename:join(OtherFs, @@ -1653,10 +1650,7 @@ e_rename(Config) when is_list(Config) -> Else -> Else end, - Com; - {ose, _} -> - %% disabled for now - ok + Com end, ?line test_server:timetrap_cancel(Dog), Comment. diff --git a/lib/ose/Makefile b/lib/ose/Makefile deleted file mode 100644 index 6119b75c3f..0000000000 --- a/lib/ose/Makefile +++ /dev/null @@ -1,37 +0,0 @@ -# -# %CopyrightBegin% -# -# Copyright Ericsson AB 1996-2009. All Rights Reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# -# %CopyrightEnd% -# -include $(ERL_TOP)/make/target.mk -include $(ERL_TOP)/make/$(TARGET)/otp.mk - -# -# Macros -# - -SUB_DIRECTORIES = src doc/src - -include vsn.mk -VSN = $(OSE_VSN) - -SPECIAL_TARGETS = - -# -# Default Subdir Targets -# -include $(ERL_TOP)/make/otp_subdir.mk diff --git a/lib/ose/doc/html/.gitignore b/lib/ose/doc/html/.gitignore deleted file mode 100644 index e69de29bb2..0000000000 --- a/lib/ose/doc/html/.gitignore +++ /dev/null diff --git a/lib/ose/doc/man3/.gitignore b/lib/ose/doc/man3/.gitignore deleted file mode 100644 index e69de29bb2..0000000000 --- a/lib/ose/doc/man3/.gitignore +++ /dev/null diff --git a/lib/ose/doc/man6/.gitignore b/lib/ose/doc/man6/.gitignore deleted file mode 100644 index e69de29bb2..0000000000 --- a/lib/ose/doc/man6/.gitignore +++ /dev/null diff --git a/lib/ose/doc/pdf/.gitignore b/lib/ose/doc/pdf/.gitignore deleted file mode 100644 index e69de29bb2..0000000000 --- a/lib/ose/doc/pdf/.gitignore +++ /dev/null diff --git a/lib/ose/doc/src/.gitignore b/lib/ose/doc/src/.gitignore deleted file mode 100644 index 860e9e703e..0000000000 --- a/lib/ose/doc/src/.gitignore +++ /dev/null @@ -1 +0,0 @@ -ose.xml diff --git a/lib/ose/doc/src/Makefile b/lib/ose/doc/src/Makefile deleted file mode 100644 index 7ebd4125ba..0000000000 --- a/lib/ose/doc/src/Makefile +++ /dev/null @@ -1,133 +0,0 @@ -# -# %CopyrightBegin% -# -# Copyright Ericsson AB 1997-2012. All Rights Reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# -# %CopyrightEnd% -# -include $(ERL_TOP)/make/target.mk -include $(ERL_TOP)/make/$(TARGET)/otp.mk - -# ---------------------------------------------------- -# Application version -# ---------------------------------------------------- -include ../../vsn.mk -VSN=$(OSE_VSN) -APPLICATION=ose - -# ---------------------------------------------------- -# Release directory specification -# ---------------------------------------------------- -RELSYSDIR = $(RELEASE_PATH)/lib/$(APPLICATION)-$(VSN) - -# ---------------------------------------------------- -# Help application directory specification -# ---------------------------------------------------- -EDOC_DIR = $(ERL_TOP)/lib/edoc -SYNTAX_TOOLS_DIR = $(ERL_TOP)/lib/syntax_tools - -# ---------------------------------------------------- -# Target Specs -# ---------------------------------------------------- -XML_APPLICATION_FILES = ref_man.xml - -XML_REF3_FILES = \ - ose.xml \ - ose_erl_driver.xml - -XML_REF6_FILES = ose_app.xml - -XML_PART_FILES = part.xml -XML_CHAPTER_FILES = notes.xml ose_intro.xml ose_signals_chapter.xml - -BOOK_FILES = book.xml - -XML_FILES = \ - $(BOOK_FILES) $(XML_CHAPTER_FILES) \ - $(XML_PART_FILES) $(XML_REF3_FILES) $(XML_REF6_FILES) \ - $(XML_APPLICATION_FILES) - -# ---------------------------------------------------- - -HTML_FILES = $(XML_APPLICATION_FILES:%.xml=$(HTMLDIR)/%.html) \ - $(XML_PART_FILES:%.xml=$(HTMLDIR)/%.html) - -INFO_FILE = ../../info - -MAN3_FILES = $(XML_REF3_FILES:%.xml=$(MAN3DIR)/%.3) -MAN6_FILES = $(XML_REF6_FILES:%_app.xml=$(MAN6DIR)/%.6) - -HTML_REF_MAN_FILE = $(HTMLDIR)/index.html - -TOP_PDF_FILE = $(PDFDIR)/$(APPLICATION)-$(VSN).pdf - -SPECS_FILES = - -TOP_SPECS_FILE = - -# ---------------------------------------------------- -# FLAGS -# ---------------------------------------------------- -XML_FLAGS += - -SPECS_FLAGS = -I../../include -I../../../kernel/include - -OSE_SRC_DIR = ../../src - -# ---------------------------------------------------- -# Targets -# ---------------------------------------------------- -docs: man pdf html - -$(TOP_PDF_FILE): $(XML_FILES) - -pdf: $(TOP_PDF_FILE) - -html: $(HTML_REF_MAN_FILE) - -man: $(MAN3_FILES) $(MAN6_FILES) - -ose.xml: $(OSE_SRC_DIR)/ose.erl - escript $(DOCGEN)/priv/bin/xml_from_edoc.escript\ - $(OSE_SRC_DIR)/$(@:%.xml=%.erl) - -debug opt: - -clean clean_docs: - rm -rf $(HTMLDIR)/* - rm -f $(MAN3DIR)/* - rm -f $(MAN6DIR)/* - rm -f $(TOP_PDF_FILE) $(TOP_PDF_FILE:%.pdf=%.fo) - rm -f $(SPECDIR)/* - rm -f errs core *~ - -# ---------------------------------------------------- -# Release Target -# ---------------------------------------------------- -include $(ERL_TOP)/make/otp_release_targets.mk - -release_docs_spec: docs - $(INSTALL_DIR) "$(RELSYSDIR)/doc/pdf" - $(INSTALL_DATA) $(TOP_PDF_FILE) "$(RELSYSDIR)/doc/pdf" - $(INSTALL_DIR) "$(RELSYSDIR)/doc/html" - $(INSTALL_DATA) $(HTMLDIR)/* \ - "$(RELSYSDIR)/doc/html" - $(INSTALL_DATA) $(INFO_FILE) "$(RELSYSDIR)" - $(INSTALL_DIR) "$(RELEASE_PATH)/man/man3" - $(INSTALL_DATA) $(MAN3DIR)/* "$(RELEASE_PATH)/man/man3" - $(INSTALL_DIR) "$(RELEASE_PATH)/man/man6" - $(INSTALL_DATA) $(MAN6_FILES) "$(RELEASE_PATH)/man/man6" - -release_spec: diff --git a/lib/ose/doc/src/book.xml b/lib/ose/doc/src/book.xml deleted file mode 100644 index d62e0d32f4..0000000000 --- a/lib/ose/doc/src/book.xml +++ /dev/null @@ -1,49 +0,0 @@ -<?xml version="1.0" encoding="utf-8" ?> -<!DOCTYPE book SYSTEM "book.dtd"> - -<book xmlns:xi="http://www.w3.org/2001/XInclude"> - <header titlestyle="normal"> - <copyright> - <year>2014</year><year>2014</year> - <holder>Ericsson AB. All Rights Reserved.</holder> - </copyright> - <legalnotice> - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - - </legalnotice> - - <title>OSE</title> - <prepared>Lukas Larsson</prepared> - <docno></docno> - <date>2014-01-08</date> - <rev>1.0</rev> - <file>book.xml</file> - </header> - <insidecover> - </insidecover> - <pagetext>OSE</pagetext> - <preamble> - <contents level="2"></contents> - </preamble> - <parts> - <xi:include href="part.xml"/> - </parts> - <applications> - <xi:include href="ref_man.xml"/> - </applications> - <releasenotes> - <xi:include href="notes.xml"/> - </releasenotes> - <listofterms></listofterms> - <index></index> -</book> diff --git a/lib/ose/doc/src/notes.xml b/lib/ose/doc/src/notes.xml deleted file mode 100644 index 06881b6c99..0000000000 --- a/lib/ose/doc/src/notes.xml +++ /dev/null @@ -1,109 +0,0 @@ -<?xml version="1.0" encoding="utf-8" ?> -<!DOCTYPE chapter SYSTEM "chapter.dtd"> - -<chapter> - <header> - <copyright> - <year>2014</year><year>2014</year> - <holder>Ericsson AB. All Rights Reserved.</holder> - </copyright> - <legalnotice> - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - - </legalnotice> - - <title>OSE Release Notes</title> - <prepared></prepared> - <docno></docno> - <date></date> - <rev></rev> - <file>notes.xml</file> - </header> - <p>This document describes the changes made to the OSE application.</p> - -<section><title>Ose 1.1</title> - - <section><title>Improvements and New Features</title> - <list> - <item> - <p> - Change license text from Erlang Public License to Apache - Public License v2</p> - <p> - Own Id: OTP-12845</p> - </item> - </list> - </section> - -</section> - -<section><title>Ose 1.0.2</title> - - <section><title>Fixed Bugs and Malfunctions</title> - <list> - <item> - <p> - Add missing release notes for the OSE application.</p> - <p> - Own Id: OTP-12177</p> - </item> - </list> - </section> - -</section> - -<section><title>Ose 1.0.1</title> - - <section><title>Fixed Bugs and Malfunctions</title> - <list> - <item> - <p> - Fix some spelling mistakes in documentation</p> - <p> - Own Id: OTP-12152</p> - </item> - </list> - </section> - -</section> - -<section><title>Ose 1.0</title> - - <section><title>Improvements and New Features</title> - <list> - <item> - <p> - Erlang/OTP has been ported to the realtime operating - system OSE. The port supports both smp and non-smp - emulator. For details around the port and how to started - see the User's Guide in the <seealso - marker="ose:ose_intro">ose</seealso> application. </p> - <p> - Note that not all parts of Erlang/OTP has been ported. </p> - <p> - Notable things that work are: non-smp and smp emulators, - OSE signal interaction, crypto, asn1, run_erl/to_erl, - tcp, epmd, distribution and most if not all non-os - specific functionality of Erlang.</p> - <p> - Notable things that does not work are: udp/sctp, os_mon, - erl_interface, binding of schedulers.</p> - <p> - Own Id: OTP-11334</p> - </item> - </list> - </section> - -</section> - -</chapter> diff --git a/lib/ose/doc/src/ose_app.xml b/lib/ose/doc/src/ose_app.xml deleted file mode 100644 index d555f0ec4f..0000000000 --- a/lib/ose/doc/src/ose_app.xml +++ /dev/null @@ -1,38 +0,0 @@ -<?xml version="1.0" encoding="utf-8" ?> -<!DOCTYPE appref SYSTEM "appref.dtd"> - -<appref> - <header> - <copyright> - <year>2014</year><year>2014</year> - <holder>Ericsson AB. All Rights Reserved.</holder> - </copyright> - <legalnotice> - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - - </legalnotice> - - <title>Enea OSE</title> - <prepared></prepared> - <docno></docno> - <date></date> - <rev></rev> - </header> - <app>ose</app> - <appsummary>The OSE Application</appsummary> - <description> - <p>The OSE application contains modules and documentation that only - applies when running Erlang/OTP on Enea OSE.</p> - </description> - -</appref> diff --git a/lib/ose/doc/src/ose_erl_driver.xml b/lib/ose/doc/src/ose_erl_driver.xml deleted file mode 100644 index b804c29d2d..0000000000 --- a/lib/ose/doc/src/ose_erl_driver.xml +++ /dev/null @@ -1,111 +0,0 @@ -<?xml version="1.0" encoding="utf-8" ?> -<!DOCTYPE cref SYSTEM "cref.dtd"> - -<cref> - <header> - <copyright> - <year>2013</year><year>2014</year> - <holder>Ericsson AB. All Rights Reserved.</holder> - </copyright> - <legalnotice> - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - - </legalnotice> - - <title>erl_driver for Enea OSE</title> - <prepared>Lukas Larsson</prepared> - <docno></docno> - <date>2014-01-08</date> - <rev>A</rev> - <file>ose_erl_driver.xml</file> - </header> - <lib>ose_erl_driver</lib> - <libsummary>Linked-in drivers in Enea OSE</libsummary> - <description> - <p>Writing Linked-in drivers that also work on Enea OSE is very similar for - how you would do it for Unix. The difference from Unix is that - driver_select, ready_input and ready_output all work with signals - instead of file descriptors. This means that the driver_select is - used to specify which type of signal should trigger calls to - ready_input/ready_output. The functions described below are available - to driver programmers on Enea OSE to facilitate this. - </p> - </description> - <section> - <title>DATA TYPES</title> - - <taglist> - <tag><marker id="union_SIGNAL"/>union SIGNAL</tag> - <item>See the Enea OSE SPI documentation for a description.</item> - <tag><marker id="SIGSELECT"/>SIGSELECT</tag> - <item>See the Enea OSE SPI documentation for a description.</item> - <tag><marker id="ErlDrvEvent"/>ErlDrvEvent</tag> - <item>The <c>ErlDrvEvent</c> is a handle to a signal number and id combination. It is passed to <seealso marker="erts:erl_driver#driver_select">driver_select(3)</seealso>.</item> - <tag><marker id="ErlDrvOseEventId"/>ErlDrvOseEventId</tag> - <item>This is the id used to associate a specific signal to a - certain driver instance. </item> - </taglist> - </section> - <funcs> - <func> - <name><ret>union SIGNAL *</ret><nametext>erl_drv_ose_get_signal(ErlDrvEvent drv_event)</nametext></name> - <desc> - <marker id="erl_drv_ose_get_signal"></marker> - <p>Fetch the next signal associated with <c>drv_event</c>. - Signals will be returned in the order which they were received and - when no more signals are available <c>NULL</c> will be returned. - Use this function in the ready_input/ready_output callbacks - to get signals.</p> - </desc> - </func> - <func> - <name><ret>ErlDrvEvent</ret><nametext>erl_drv_ose_event_alloc(SIGSELECT signo, ErlDrvOseEventId id, ErlDrvOseEventId (*resolve_signal)(union SIGNAL* sig), void *extra)</nametext></name> - <desc> - <marker id="erl_drv_ose_event_alloc"></marker> - <p>Create a new <c>ErlDrvEvent</c> associated with <c>signo</c>, - <c>id</c> and uses the <c>resolve_signal</c> function to extract - the <c>id</c> from a signal with <c>signo</c>. The <c>extra</c> - parameter can be used for additional data. See - <seealso marker="ose_signals_chapter#driver"> - Signals in a Linked-in driver</seealso> in the OSE User's Guide. - </p> - </desc> - </func> - <func> - <name><ret>void</ret><nametext>erl_drv_ose_event_free(ErlDrvEvent drv_event)</nametext></name> - <desc> - <marker id="erl_drv_ose_event_free"></marker> - <p>Free a <c>ErlDrvEvent</c>. This should always be done in the - <seealso marker="erts:driver_entry#stop_select">stop_select</seealso> - callback when the event is no longer being used.</p> - </desc> - </func> - <func> - <name><ret>void</ret><nametext>erl_drv_ose_event_fetch(ErlDrvEvent drv_event, SIGSELECT *signo, ErlDrvOseEventId *id, void **extra)</nametext></name> - <desc> - <marker id="erl_drv_ose_event_fetch"></marker> - <p>Write the signal number, id and any extra data associated with <c>drv_event</c> - into <c>*signo</c> and <c>*id</c> respectively. <c>NULL</c> can be - also passed as <c>signo</c> or <c>id</c> in order to ignore that field. - </p> - </desc> - </func> - </funcs> - <section> - <title>SEE ALSO</title> - <p> - <seealso marker="erts:driver_entry">driver_entry(3)</seealso>, - <seealso marker="erts:erl_driver">erl_driver(3)</seealso> - </p> - </section> -</cref> diff --git a/lib/ose/doc/src/ose_intro.xml b/lib/ose/doc/src/ose_intro.xml deleted file mode 100644 index 982516c8bd..0000000000 --- a/lib/ose/doc/src/ose_intro.xml +++ /dev/null @@ -1,154 +0,0 @@ -<?xml version="1.0" encoding="utf-8" ?> -<!DOCTYPE chapter SYSTEM "chapter.dtd"> - -<chapter> - <header> - <copyright> - <year>2013</year><year>2014</year> - <holder>Ericsson AB. All Rights Reserved.</holder> - </copyright> - <legalnotice> - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - - </legalnotice> - - <title>Introduction</title> - <prepared>Lukas Larsson</prepared> - <docno></docno> - <date>2014-01-08</date> - <rev>A</rev> - <file>ose_intro.xml</file> - </header> - - <section> - <title>Features</title> - </section> - - <section> - <title>Starting Erlang/OTP</title> - <p> - Starting Erlang/OTP on OSE is not as simple as on Unix/Windows (yet). - First of all you have to explicitly use the beam (or beam.smp) executables - found in erts-X.Y.Z/bin as the load module that you run. This in turn - means that you have to supply the raw beam arguments to the emulator - when starting. Fortunately <c>erl</c> on Unix/Windows has a - undocumented flag called <c>-emu_args_exit</c> that can be used to - figure out what the arguments to beam look like. For example:</p> - <code># erl +Mut false +A 10 +S 4:4 +Muycs256 +P 2096 +Q 2096 -emu_args_exit --Mut -false --A -10 --S -4:4 --Muycs256 --P -2096 --Q -2096 --- --root -/usr/local/lib/erlang --progname -erl --- --home -/home/erlang ---</code> - <p> - The arguments are printed on separate lines to make it possible to know - what has to be quoted with ". Each line is one quotable unit. - So taking the arguments above you can supply them to pm_create or - just execute directly on the command line. For example:</p> - <code>rtose@acp3400> pm_install erlang /mst/erlang/erts-6.0/bin/beam.smp -rtose@acp3400> pm_create -c ARGV="-Mut false -A 10 -S 4:4 -Muycs256 -P 2096 -Q 2099 -- -root /mst/erlang -progname erl -- -home /mst/erlang --" erlang -pid: 0x110059 -rtose@acp3400> pm_start 0x110059</code> - <p> - Also note that since we are running erl to figure out the arguments on a - separate machine the paths have to be updated. In the example above - <c>/usr/local/lib/erlang</c> was replaced by <c>/mst/erlang/</c>. The - goal is to in future releases not have to do the special argument handling - but for now (OTP 17.0) you have to do it. - </p> - <note> - Because of a limitation in the way the OSE handles stdio when starting - load modules using pm_install/create the Erlang shell only reads every - other command from stdin. However if you start Erlang using run_erl - you do not have this problem. So it is highly recommended that you - start Erlang using run_erl. - </note> - </section> - - <section> - <title>run_erl and to_erl</title> - <p> - In OSE run_erl and to_erl are combined into a single load module called - run_erl_lm. Installing and starting the load module will add two new - shell commands called run_erl and to_erl. They work in exactly the same - way as the unix variants of run_erl and to_erl, except that the read - and write pipes have to be placed under the /pipe vm. One additional - option also exists to run_erl on ose: - <taglist> - <tag><c>-block Name</c></tag> - <item>The name of the install handle and block that will be created/used by - installing and exectuting the first part of the command. If nothing - if given the basename of the load module will be used for this value. - Example: - <code>pm_install erlang /path/to/erlang/vm/beam.smp -run_erl -daemon -block erlang /pipe/ /mst/erlang_logs/ "beam.smp -A 1 -- -root /mst/erlang -- -home /mst --"</code> - </item> - </taglist> - The same argument munching as when starting Erlang/OTP without run_erl - has to be done. If <c>-daemon</c> is given then all error printouts - are sent to the ramlog. - See also - <seealso marker="erts:run_erl">run_erl</seealso> for more details. - </p> - <p> - Below is an example of how to get started with <c>run_erl_lm</c>. - <code>rtose@acp3400> pm_install run_erl_lm /mst/erlang/erts-6.0/bin/run_erl_lm -rtose@acp3400> pm_create run_erl_lm -pid: 0x1c005d -rtose@acp3400> pm_start 0x1c005d -rtose@acp3400> mkdir /mst/erlang_log -rtose@acp3400> run_erl -daemon /pipe/ /mst/erlang_log/ "/mst/erlang/erts-6.0/bin/beam.smp -A 1 -- -root /mst/erlang -- -home /mst --" -rtose@acp3400> to_erl -Attaching to /pipe/erlang.pipe.1 (^C to exit) -os:type(). -{ose,release} -2> -'to_erl' terminated.</code> - Note that Ctrl-C is used instead of Ctrl-D to exit the to_erl shell. - </p> - </section> - - <section> - <title>epmd</title> - <p> - In OSE epmd will not be started automatically so if you want to use - Erlang distribution you have to manually start epmd. - </p> - </section> - - <section> - <title>VM Process Priorities</title> - <p> - It is possible to set the priorities you want for the OSE processes that - thr emulator creates in the lmconf. An example of how to do it can be - found in the default lmconf file in - $ERL_TOP/erts/emulator/sys/ose/beam.lmconf. - </p> - </section> - -</chapter> diff --git a/lib/ose/doc/src/ose_signals_chapter.xml b/lib/ose/doc/src/ose_signals_chapter.xml deleted file mode 100644 index bcf2259577..0000000000 --- a/lib/ose/doc/src/ose_signals_chapter.xml +++ /dev/null @@ -1,240 +0,0 @@ -<?xml version="1.0" encoding="utf-8" ?> -<!DOCTYPE chapter SYSTEM "chapter.dtd"> - -<chapter> - <header> - <copyright> - <year>2013</year><year>2014</year> - <holder>Ericsson AB. All Rights Reserved.</holder> - </copyright> - <legalnotice> - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - - </legalnotice> - - <title>Interacting with Enea OSE</title> - <prepared>Lukas Larsson</prepared> - <docno></docno> - <date>2014-01-08</date> - <rev>A</rev> - <file>ose_signals_chapter.xml</file> - </header> - - <marker id="introduction"></marker> - <section> - <title>Introduction</title> - <p>The main way which programs on Enea OSE interact is through the - usage of message passing, much the same way as Erlang processes - communicate. There are two ways in which an Erlang programmer can - interact with the signals sent from other Enea OSE processes; either - through the provided <c>ose</c> module, or by writing a custom linked-in - driver. This User's Guide describes and provides examples for both - approaches. - </p> - </section> - - <marker id="erlang"></marker> - <section> - <title>Signals in Erlang</title> - <p>Erlang/OTP on OSE provides a erlang module called - <seealso marker="ose:ose">ose</seealso> that can be used to interact - with other OSE processes using message passing. The api in the module - is very similar to the native OSE api, so for details of how the - functions work please refer to the official OSE documenation. Below - is an example usage of the API. - </p> - <code>1> P1 = ose:open("p1"). -#Port>0.344> -2> ose:hunt(P1,"p2"). -{#Port>0.344>,1} -3> P2 = ose:open("p2"). -#Port>0.355> -4> flush(). -Shell got {mailbox_up,#Port>0.344>,{#Port>0.344>,1},852189} -ok -5> ose:listen(P1,[1234]). -ok -6> ose:send(P2,ose:get_id(P1),1234,>>"hello">>). -ok -7> flush(). -Shell got {message,#Port>0.344>,{852189,1245316,1234,>>"hello">>}} -ok</code> - </section> - - <marker id="driver"></marker> - <section> - <title>Signals in a Linked-in driver</title> - <p> - Writing Linked-in drivers for OSE is very similar to how it is done - for Unix/Windows. It is only the way in which the driver subscribes - and consumed external events that is different. In Unix (and Windows) - file descriptiors (and Event Objects) are used to select on. On OSE - we use signals to deliver the same functionality. There are two large - differences between a signal and an fd. - </p> - <p> - In OSE it is not possible for a signal number to be a unique identifier - for a resource in the same way as an fd is. For example; let's say we - implement a driver that does an asynchronous hunt that uses signal - number 1234 as the hunt_sig. If we want to be able to have multiple - hunt ports running at the same time we have to have someway of routing - the signal to the correct port. This is achieved by supplying a secondary - id that can be retrieved through the meta-data or payload of the signal, - e.g: - <code>ErlDrvEvent event = erl_drv_ose_event_alloc(1234,port,resolver);</code> - The event you get back from - <seealso marker="ose_erl_driver#erl_drv_ose_event_alloc"> - erl_drv_ose_event_alloc</seealso> can then be used by - <seealso marker="erts:erl_driver#driver_select">driver_select</seealso> - to subscribe to signals. The first argument is just the signal number - that we are interested in. The second is the id that we choose to use, - in this case the port id that we got in the - <seealso marker="erts:driver_entry#start">start</seealso> callback is - used. The third argument is a function pointer to a function that can - be used to figure out the id from a given signal. The fourth argument can - point to any additional data you might want to associate with the event. - There is a complete. You can examine the data contained in the event with - <seealso marker="ose_erl_driver#erl_drv_ose_event_fetch">erl_drv_ose_event_fetch</seealso> - , eg: - <code>erl_drv_ose_event_fetch(event, &signal, &port, (void **)&extra);</code> - example of what this could look like in - <seealso marker="#example">the next section</seealso>. - <note>It is very important to issue the driver_select call before - any of the signals you are interested in are sent. If driver_select - is called after the signal is sent, there is a high probability that it - will be lost.</note> - </p> - <p> - The other difference from unix is that in OSE the payload of the event - (i.e. the signal data) is already received when the ready_output/input - callbacks are called. This means that you access the data of a signal - by calling <seealso marker="ose_erl_driver#erl_drv_ose_get_signal"> - erl_drv_ose_get_signal</seealso>. Additionally multiple signals might be - associated with the event, so you should call - <seealso marker="ose_erl_driver#erl_drv_ose_get_signal"> - erl_drv_ose_get_signal</seealso> until <c>NULL</c> is returned. - </p> - </section> - - <marker id="example"></marker> - <section> - <title>Example Linked-in driver</title> -<code>#include "erl_driver.h" -#include "ose.h" - -struct huntsig { - SIGSELECT signo; - ErlDrvPort port; -}; - -union SIGNAL { - SIGSELECT signo; - struct huntsig; -} - -/* Here we have to get the id from the signal. In this case we use the - port id since we have control over the data structure of the signal. - It is however possible to use anything in here. The only restriction - is that the same id has to be used for all signals of the same number.*/ -ErlDrvOseEventId resolver(union SIGNAL *sig) { - return (ErlDrvOseEventId)sig->huntsig.port; -} - -static int drv_init(void) { return 0; }; - -static ErlDrvData drv_start(ErlDrvPort port, char *command) { - return (ErlDrvData)port; -} - -static ErlDrvSSizeT control(ErlDrvData driver_data, unsigned int cmd, - char *buf, ErlDrvSizeT len, - char **rbuf, ErlDrvSizeT rlen) { - ErlDrvPort port = (ErlDrvPort)driver_data; - - /* An example of extra data to associate with the event */ - char *extra_data = driver_alloc(80); - snprintf("extra_data, "Event, sig_no: 1234, and port: %d", port); - - /* Create a new event to select on */ - ErlDrvOseEvent evt = erl_drv_ose_event_alloc(1234,port,resolver, extra_data); - - /* Make sure to do the select call _BEFORE_ the signal arrives. - The signal might get lost if the hunt call is done before the - select. */ - driver_select(port,evt,ERL_DRV_READ|ERL_DRV_USE,1); - - union SIGNAL *sig = alloc(sizeof(union SIGNAL),1234); - sig->huntsig.port = port; - hunt("testprocess",0,NULL,&sig); - return 0; -} - -static void ready_input(ErlDrvData driver_data, ErlDrvEvent evt) { - char *extra_data; - /* Get the first signal payload from the event */ - union SIGNAL *sig = erl_drv_ose_get_signal(evt); - ErlDrvPort port = (ErlDrvPort)driver_data; - while (sig != NULL) { - if (sig->signo == 1234) { - /* Print out the string we added as the extra parameter */ - erl_drv_ose_event_fetch(evt, NULL, NULL, (void **)&extra_data); - printf("We've received: %s\n", extra_data); - - /* If it is our signal we send a message with the sender of the signal - to the controlling erlang process */ - ErlDrvTermData reply[] = { ERL_DRV_UINT, (ErlDrvUInt)sender(&sig) }; - erl_drv_send_term(port,reply,sizeof(reply) / sizeof(reply[0])); - } - - /* Cleanup the signal and deselect on the event. - Note that the event itself has to be free'd in the stop_select - callback. */ - free_buf(&sig); - driver_select(port,evt,ERL_DRV_READ|ERL_DRV_USE,0); - - /* There could be more than one signal waiting in this event, so - we have to loop until sig == NULL */ - sig = erl_drv_ose_get_signal(evt); - } -} - -static void stop_select(ErlDrvEvent event, void *reserved) -{ - /* Free the extra_data */ - erl_drv_ose_event_fetch(evt, NULL, NULL, (void **)&extra_data); - driver_free(extra_data); - - /* Free the event itself */ - erl_drv_ose_event_free(event); -} - -/** - * Setup the driver entry for the Erlang runtime - **/ -ErlDrvEntry ose_signal_driver_entry = { - .init = drv_init, - .start = drv_start, - .stop = drv_stop, - .ready_input = ready_input, - .driver_name = DRIVER_NAME, - .control = control, - .extended_marker = ERL_DRV_EXTENDED_MARKER, - .major_version = ERL_DRV_EXTENDED_MAJOR_VERSION, - .minor_version = ERL_DRV_EXTENDED_MINOR_VERSION, - .driver_flags = ERL_DRV_FLAG_USE_PORT_LOCKING, - .stop_select = stop_select -}; -</code> - </section> - -</chapter> diff --git a/lib/ose/doc/src/part.xml b/lib/ose/doc/src/part.xml deleted file mode 100644 index 0c9ebd16c0..0000000000 --- a/lib/ose/doc/src/part.xml +++ /dev/null @@ -1,39 +0,0 @@ -<?xml version="1.0" encoding="utf-8" ?> -<!DOCTYPE part SYSTEM "part.dtd"> - -<part xmlns:xi="http://www.w3.org/2001/XInclude"> - <header> - <copyright> - <year>2014</year> - <year>2014</year> - <holder>Ericsson AB, All Rights Reserved</holder> - </copyright> - <legalnotice> - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - - The Initial Developer of the Original Code is Ericsson AB. - </legalnotice> - - <title>OSE User's Guide</title> - <prepared>Lukas Larsson</prepared> - <docno></docno> - <date>2014-01-08</date> - <rev>1.0</rev> - <file>part.xml</file> - </header> - <description> - <p><em>OSE</em>.</p> - </description> - <xi:include href="ose_intro.xml"/> - <xi:include href="ose_signals_chapter.xml"/> -</part> diff --git a/lib/ose/doc/src/ref_man.xml b/lib/ose/doc/src/ref_man.xml deleted file mode 100644 index 964e5ab8ff..0000000000 --- a/lib/ose/doc/src/ref_man.xml +++ /dev/null @@ -1,40 +0,0 @@ -<?xml version="1.0" encoding="utf-8" ?> -<!DOCTYPE application SYSTEM "application.dtd"> - -<application xmlns:xi="http://www.w3.org/2001/XInclude"> - <header> - <copyright> - <year>2014</year><year>2014</year> - <holder>Ericsson AB. All Rights Reserved.</holder> - </copyright> - <legalnotice> - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - - </legalnotice> - - <title>OSE Reference Manual</title> - <prepared>Lukas Larsson</prepared> - <docno></docno> - <date>2014-01-08</date> - <rev>1.0</rev> - <file>ref_man.xml</file> - </header> - <description> - <p>The Standard Erlang Libraries application, <em>STDLIB</em>, - contains modules for manipulating lists, strings and files etc.</p> - <br></br> - </description> - <xi:include href="ose_app.xml"/> - <xi:include href="ose.xml"/> - <xi:include href="ose_erl_driver.xml"/> -</application> diff --git a/lib/ose/ebin/.gitignore b/lib/ose/ebin/.gitignore deleted file mode 100644 index e69de29bb2..0000000000 --- a/lib/ose/ebin/.gitignore +++ /dev/null diff --git a/lib/ose/include/.gitignore b/lib/ose/include/.gitignore deleted file mode 100644 index e69de29bb2..0000000000 --- a/lib/ose/include/.gitignore +++ /dev/null diff --git a/lib/ose/info b/lib/ose/info deleted file mode 100644 index 85c07dbe82..0000000000 --- a/lib/ose/info +++ /dev/null @@ -1,2 +0,0 @@ -group: misc Miscellaneous Applications -short: Description of Enea OSE specific functionality diff --git a/lib/ose/src/Makefile b/lib/ose/src/Makefile deleted file mode 100644 index a89e9392e9..0000000000 --- a/lib/ose/src/Makefile +++ /dev/null @@ -1,107 +0,0 @@ -# -# %CopyrightBegin% -# -# Copyright Ericsson AB 1996-2013. All Rights Reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# -# %CopyrightEnd% -# - -include $(ERL_TOP)/make/target.mk -include $(ERL_TOP)/make/$(TARGET)/otp.mk - -# ---------------------------------------------------- -# Application version -# ---------------------------------------------------- -include ../vsn.mk -VSN=$(OSE_VSN) - -# ---------------------------------------------------- -# Release directory specification -# ---------------------------------------------------- -RELSYSDIR = $(RELEASE_PATH)/lib/ose-$(VSN) - -# ---------------------------------------------------- -# Target Specs -# ---------------------------------------------------- -MODULES= \ - ose - -HRL_FILES= - -INTERNAL_HRL_FILES= - -ERL_FILES= $(MODULES:%=%.erl) - -TARGET_FILES= $(MODULES:%=$(EBIN)/%.$(EMULATOR)) $(APP_TARGET) $(APPUP_TARGET) - -APP_FILE= ose.app - -APP_SRC= $(APP_FILE).src -APP_TARGET= $(EBIN)/$(APP_FILE) - -APPUP_FILE= ose.appup - -APPUP_SRC= $(APPUP_FILE).src -APPUP_TARGET= $(EBIN)/$(APPUP_FILE) - -# ---------------------------------------------------- -# FLAGS -# ---------------------------------------------------- - -ifeq ($(NATIVE_LIBS_ENABLED),yes) -ERL_COMPILE_FLAGS += +native -endif -ERL_COMPILE_FLAGS += -I../include -I../../kernel/include -Werror - -# ---------------------------------------------------- -# Targets -# ---------------------------------------------------- - -debug opt: $(TARGET_FILES) - -clean: - rm -f $(TARGET_FILES) - rm -f core - rm -f erl_parse.erl - -docs: - -# ---------------------------------------------------- -# Special Build Targets -# ---------------------------------------------------- - -$(APP_TARGET): $(APP_SRC) ../vsn.mk - $(vsn_verbose)sed -e 's;%VSN%;$(VSN);' $< > $@ - -$(APPUP_TARGET): $(APPUP_SRC) ../vsn.mk - $(vsn_verbose)sed -e 's;%VSN%;$(VSN);' $< > $@ - -# ---------------------------------------------------- -# Release Target -# ---------------------------------------------------- -include $(ERL_TOP)/make/otp_release_targets.mk - -release_spec: opt - $(INSTALL_DIR) "$(RELSYSDIR)/src" - $(INSTALL_DATA) $(ERL_FILES) "$(RELSYSDIR)/src" - $(INSTALL_DIR) "$(RELSYSDIR)/include" - $(INSTALL_DIR) "$(RELSYSDIR)/ebin" - $(INSTALL_DATA) $(TARGET_FILES) "$(RELSYSDIR)/ebin" - -release_docs_spec: - -# ---------------------------------------------------- -# Dependencies -- alphabetically, please -# ---------------------------------------------------- diff --git a/lib/ose/src/ose.app.src b/lib/ose/src/ose.app.src deleted file mode 100644 index 036779eb16..0000000000 --- a/lib/ose/src/ose.app.src +++ /dev/null @@ -1,28 +0,0 @@ -%% This is an -*- erlang -*- file. -%% -%% %CopyrightBegin% -%% -%% Copyright Ericsson AB 1996-2011. All Rights Reserved. -%% -%% Licensed under the Apache License, Version 2.0 (the "License"); -%% you may not use this file except in compliance with the License. -%% You may obtain a copy of the License at -%% -%% http://www.apache.org/licenses/LICENSE-2.0 -%% -%% Unless required by applicable law or agreed to in writing, software -%% distributed under the License is distributed on an "AS IS" BASIS, -%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -%% See the License for the specific language governing permissions and -%% limitations under the License. -%% -%% %CopyrightEnd% -%% -{application, ose, - [{description, "Enea OSE specific modules"}, - {vsn, "%VSN%"}, - {modules, [ose]}, - {registered,[]}, - {applications, [stdlib,kernel]}, - {env, []}, - {runtime_dependencies, ["stdlib-2.0","erts-6.0"]}]}. diff --git a/lib/ose/src/ose.appup.src b/lib/ose/src/ose.appup.src deleted file mode 100644 index 28b6da3439..0000000000 --- a/lib/ose/src/ose.appup.src +++ /dev/null @@ -1,23 +0,0 @@ -%% -*- erlang -*- -%% %CopyrightBegin% -%% -%% Copyright Ericsson AB 1999-2013. All Rights Reserved. -%% -%% Licensed under the Apache License, Version 2.0 (the "License"); -%% you may not use this file except in compliance with the License. -%% You may obtain a copy of the License at -%% -%% http://www.apache.org/licenses/LICENSE-2.0 -%% -%% Unless required by applicable law or agreed to in writing, software -%% distributed under the License is distributed on an "AS IS" BASIS, -%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -%% See the License for the specific language governing permissions and -%% limitations under the License. -%% -%% %CopyrightEnd% -{"%VSN%", - [ - ], - [ - ]}. diff --git a/lib/ose/src/ose.erl b/lib/ose/src/ose.erl deleted file mode 100644 index 5534dba4d4..0000000000 --- a/lib/ose/src/ose.erl +++ /dev/null @@ -1,453 +0,0 @@ -%% -%% %CopyrightBegin% -%% -%% Copyright Ericsson AB 2013. All Rights Reserved. -%% -%% Licensed under the Apache License, Version 2.0 (the "License"); -%% you may not use this file except in compliance with the License. -%% You may obtain a copy of the License at -%% -%% http://www.apache.org/licenses/LICENSE-2.0 -%% -%% Unless required by applicable law or agreed to in writing, software -%% distributed under the License is distributed on an "AS IS" BASIS, -%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -%% See the License for the specific language governing permissions and -%% limitations under the License. -%% -%% %CopyrightEnd% -%% -%% @doc Interface module for OSE messaging and process monitoring from Erlang -%% -%% For each mailbox created through {@link open/1} a OSE phantom process with -%% that name is started. Since phantom processes are used the memory footprint -%% of each mailbox is quite small. -%% -%% To receive messages you first have to subscribe to the specific message -%% numbers that you are interested in with {@link listen/2}. The messages -%% will be sent to the Erlang process that created the mailbox. -%% -%% @end -%% --module(ose). - -%%============================================================================== -%% Exported API -%%============================================================================== --export([open/1, - close/1, - get_id/1, - get_name/2, - hunt/2, - dehunt/2, - attach/2, - detach/2, - send/4, - send/5, - listen/2 - ]). - -%%============================================================================== -%% Types -%%============================================================================== --opaque mailbox() :: port(). -%% Mailbox handle. Implemented as an erlang port. - --opaque mailbox_id() :: integer(). -%% Mailbox ID, this is the same as the process id of an OSE process. -%% An integer. - --type message_number() :: 0..4294967295. -%% OSE Signal number - --opaque hunt_ref() :: {mailbox(),integer()}. -%% Reference from a hunt request. This term will be included -%% in a successful hunt response. - --opaque attach_ref() :: {mailbox(),integer()}. -%% Reference from an attach request. This term will be included -%% in the term returned when the attached mailbox disappears. - --export_type([mailbox_id/0, - message_number/0, - mailbox/0, - hunt_ref/0, - attach_ref/0]). - -%%============================================================================== -%% Defines -%%============================================================================== --define(DRIVER_NAME, "ose_signal_drv"). --define(GET_SPID, 1). --define(GET_NAME, 2). --define(HUNT, 100). --define(DEHUNT, 101). --define(ATTACH, 102). --define(DETACH, 103). --define(SEND, 104). --define(SEND_W_S, 105). --define(LISTEN, 106). --define(OPEN, 200). - --define(INT_32BIT(Int),(is_integer(Int) andalso (Int >= 0) andalso (Int < (1 bsl 32)))). - -%%============================================================================== -%% API functions -%%============================================================================== - -%%------------------------------------------------------------------------------ -%% @doc Create a mailbox with the given name and return a port that handles -%% the mailbox. -%% -%% An OSE phantom process with the given name will be created that will send any -%% messages sent through this mailbox. Any messages sent to the new OSE process -%% will automatically be converted to an Erlang message and sent to the Erlang -%% process that calls this function. See {@link listen/2} for details about the -%% format of the message sent. -%% -%% The caller gets linked to the created mailbox. -%% -%% raises: `badarg' | `system_limit' -%% -%% @see listen/2 -%% @end -%%------------------------------------------------------------------------------ --spec open(Name) -> Port when - Name :: iodata(), - Port :: mailbox(). -open(Name) -> - try open_port({spawn_driver,?DRIVER_NAME}, [binary]) of - Port -> - try port_command(Port,[?OPEN,Name]) of - true -> - receive - {ose_drv_reply,Port,{error,Error}} -> - close(Port), - erlang:error(Error,[Name]); - {ose_drv_reply,Port,ok} -> - Port - end - catch - error:badarg -> close(Port),erlang:error(badarg,[Name]) - end - catch - error:badarg -> erlang:error(badarg,[Name]) - end. - -%%------------------------------------------------------------------------------ -%% @doc Close a mailbox -%% -%% This kills the OSE phantom process associated with this mailbox. -%% -%% Will also consume any ``{'EXIT',Port,_}'' message from the port that comes -%% due to the port closing when the calling process traps exits. -%% -%% raises: `badarg' -%% @end -%%------------------------------------------------------------------------------ --spec close(Port) -> ok when - Port :: mailbox(). -close(Port) when is_port(Port) -> - %% Copied from prim_inet - case erlang:process_info(self(), trap_exit) of - {trap_exit,true} -> - link(Port), - catch erlang:port_close(Port), - receive {'EXIT',Port,_} -> ok end; - {trap_exit,false} -> - catch erlang:port_close(Port), - ok - end; -close(NotPort) -> - erlang:error(badarg,[NotPort]). - -%%------------------------------------------------------------------------------ -%% @doc Get the mailbox id for the given port. -%% -%% The mailbox id is the same as the OSE process id of the OSE phantom process -%% that this mailbox represents. -%% -%% raises: `badarg' -%% @end -%%------------------------------------------------------------------------------ --spec get_id(Port) -> Pid when - Port :: mailbox(), - Pid :: mailbox_id(). -get_id(Port) -> - try port_control(Port, ?GET_SPID, <<>>) of - <<Spid:32>> -> Spid - catch error:_Error -> - erlang:error(badarg,[Port]) - end. - -%%------------------------------------------------------------------------------ -%% @doc Get the mailbox name for the given mailbox id. -%% -%% The mailbox name is the name of the OSE process with process id Pid. -%% -%% This call will fail with badarg if the underlying system does not support -%% getting the name from a process id. -%% -%% raises: `badarg' -%% @end -%%------------------------------------------------------------------------------ --spec get_name(Port, Pid) -> Name | undefined when - Port :: mailbox(), - Pid :: mailbox_id(), - Name :: binary(). -get_name(Port, Pid) when ?INT_32BIT(Pid) -> - try port_control(Port, ?GET_NAME, <<Pid:32>>) of - [] -> undefined; - Res -> Res - catch error:_Error -> - erlang:error(badarg,[Port,Pid]) - end; -get_name(Port, Pid) -> - erlang:error(badarg,[Port,Pid]). - - -%%------------------------------------------------------------------------------ -%% @doc Hunt for OSE process by name. -%% -%% Will send `{mailbox_up, Port, Ref, MboxId}' -%% to the calling process when the OSE process becomes available. -%% -%% Returns a reference term that can be used to cancel the hunt -%% using {@link dehunt/2}. -%% -%% raises: `badarg' -%% -%% @end -%%------------------------------------------------------------------------------ --spec hunt(Port, HuntPath) -> Ref when - Port :: mailbox(), - HuntPath :: iodata(), - Ref :: hunt_ref(). -hunt(Port, HuntPath) -> - try port_command(Port, [?HUNT,HuntPath]) of - true -> - receive - {ose_drv_reply,Port,{error,Error}} -> - erlang:error(Error,[Port,HuntPath]); - {ose_drv_reply,Port,Ref} -> - Ref - end - catch error:_Error -> - erlang:error(badarg,[Port,HuntPath]) - end. - -%%------------------------------------------------------------------------------ -%% @doc Stop hunting for OSE process. -%% -%% If a message for this hunt has been sent but not received -%% by the calling process, it is removed from the message queue. -%% Note that this only works if the same process that did -%% the hunt does the dehunt. -%% -%% raises: `badarg' -%% -%% @see hunt/2 -%% @end -%%------------------------------------------------------------------------------ --spec dehunt(Port, Ref) -> ok when - Port :: mailbox(), - Ref :: hunt_ref(). -dehunt(Port, {Port,Ref}) when ?INT_32BIT(Ref) -> - try port_command(Port, <<?DEHUNT:8, Ref:32>>) of - true -> - receive - {ose_drv_reply,Port,{error,enoent}} -> - %% enoent could mean that it is in the message queue - receive - {mailbox_up, Port, {Port,Ref}, _} -> - ok - after 0 -> - ok - end; - {ose_drv_reply,Port,ok} -> - ok - end - catch error:_Error -> - erlang:error(badarg,[Port,{Port,Ref}]) - end; -dehunt(Port,Ref) -> - erlang:error(badarg,[Port,Ref]). - -%%------------------------------------------------------------------------------ -%% @doc Attach to an OSE process. -%% -%% Will send `{mailbox_down, Port, Ref, MboxId}' -%% to the calling process if the OSE process exits. -%% -%% Returns a reference that can be used to cancel the attachment -%% using {@link detach/2}. -%% -%% raises: `badarg' | `enomem' -%% -%% @end -%%------------------------------------------------------------------------------ --spec attach(Port,Pid) -> Ref when - Port :: mailbox(), - Pid :: mailbox_id(), - Ref :: attach_ref(). -attach(Port, Spid) when ?INT_32BIT(Spid) -> - try port_command(Port, <<?ATTACH:8, Spid:32>>) of - true -> - receive - {ose_drv_reply,Port,{error,Error}} -> - erlang:error(Error,[Port,Spid]); - {ose_drv_reply,Port,Ref} -> - Ref - end - catch error:_Error -> - erlang:error(badarg,[Port,Spid]) - end; -attach(Port,Spid) -> - erlang:error(badarg,[Port,Spid]). - - -%%------------------------------------------------------------------------------ -%% @doc Remove attachment to an OSE process. -%% -%% If a message for this monitor has been sent but not received -%% by the calling process, it is removed from the message queue. -%% Note that this only works of the same process -%% that did the attach does the detach. -%% -%% raises: `badarg' -%% -%% @see attach/2 -%% @end -%%------------------------------------------------------------------------------ --spec detach(Port,Ref) -> ok when - Port :: mailbox(), - Ref :: attach_ref(). -detach(Port, {Port,Ref} ) when ?INT_32BIT(Ref) -> - try port_command(Port, <<?DETACH:8, Ref:32>>) of - true -> - receive - {ose_drv_reply,Port,{error,enoent}} -> - %% enoent could mean that it is in the message queue - receive - {mailbox_down,Port,{Port,Ref},_} -> - ok - after 0 -> - ok - end; - {ose_drv_reply,Port,ok} -> - ok - end - catch error:_Error -> - erlang:error(badarg,[Port,{Port,Ref}]) - end; -detach(Port,Ref) -> - erlang:error(badarg,[Port,Ref]). - -%%------------------------------------------------------------------------------ -%% @doc Send an OSE message. -%% -%% The message is sent from the OSE process' own ID that is: `get_id(Port)'. -%% -%% raises: `badarg' -%% -%% @see send/5 -%% @end -%%------------------------------------------------------------------------------ --spec send(Port,Pid,SigNo,SigData) -> ok when - Port :: mailbox(), - Pid :: mailbox_id(), - SigNo :: message_number(), - SigData :: iodata(). -send(Port, Spid, SigNo, SigData) when ?INT_32BIT(Spid), ?INT_32BIT(SigNo) -> - try erlang:port_command(Port, [<<?SEND:8, Spid:32, SigNo:32>>, SigData]) of - true -> ok - catch error:_Error -> - erlang:error(badarg,[Port,Spid,SigNo,SigData]) - end; -send(Port,Spid,SigNo,SigData) -> - erlang:error(badarg,[Port,Spid,SigNo,SigData]). - - -%%------------------------------------------------------------------------------ -%% @doc Send an OSE message with different sender. -%% -%% As {@link send/4} but the sender will be `SenderPid'. -%% -%% raises: `badarg' -%% -%% @see send/4 -%% @end -%%------------------------------------------------------------------------------ --spec send(Port,Pid,SenderPid,SigNo,SigData) -> ok when - Port :: mailbox(), - Pid :: mailbox_id(), - SenderPid :: mailbox_id(), - SigNo :: message_number(), - SigData :: iodata(). -send(Port, Spid, SenderPid, SigNo, SigData) - when ?INT_32BIT(Spid), ?INT_32BIT(SenderPid), ?INT_32BIT(SigNo) -> - try erlang:port_command(Port, [<<?SEND_W_S:8, Spid:32, SenderPid:32, - SigNo:32>>, SigData]) of - true -> ok - catch error:_Error -> - erlang:error(badarg,[Port,Spid,SenderPid,SigNo,SigData]) - end; -send(Port,Spid,SenderPid,SigNo,SigData) -> - erlang:error(badarg,[Port,Spid,SenderPid,SigNo,SigData]). - -%%------------------------------------------------------------------------------ -%% @doc Start listening for specified OSE signal numbers. -%% -%% The mailbox will send `{message,Port,{FromMboxId,ToMboxId,MsgNo,MsgData}}' -%% to the process that created the mailbox when an OSE message with any -%% of the specified `SigNos' arrives. -%% -%% Repeated calls to listen will replace the current set of signal numbers to -%% listen to. i.e -%% -%% ```1>ose:listen(MsgB,[1234,12345]). -%% ok -%% 2> ose:listen(MsgB,[1234,123456]). -%% ok.''' -%% -%% The above will first listen for signals with numbers 1234 and 12345, and then -%% replace that with only listening to 1234 and 123456. -%% -%% With the current implementation it is not possible to listen to all signal -%% numbers. -%% -%% raises: `badarg' | `enomem' -%% -%% @end -%%------------------------------------------------------------------------------ --spec listen(Port, SigNos) -> ok when - Port :: mailbox(), - SigNos :: list(message_number()). -listen(Port, SigNos) when is_list(SigNos) -> - USSigNos = lists:usort(SigNos), - BinSigNos = try - << <<SigNo:32>> || - SigNo <- USSigNos, - ?INT_32BIT(SigNo) orelse erlang:error(badarg) - >> - catch _:_ -> - erlang:error(badarg,[Port,SigNos]) - end, - try port_command(Port, [?LISTEN, BinSigNos]) of - true -> - receive - {ose_drv_reply,Port,{error,Error}} -> - erlang:error(Error,[Port,SigNos]); - {ose_drv_reply,Port,Else} -> - Else - end - catch error:_Error -> - erlang:error(badarg,[Port,SigNos]) - end; -listen(Port, SigNos) -> - erlang:error(badarg,[Port,SigNos]). - - -%%%============================================================================= -%%% Internal functions -%%%============================================================================= diff --git a/lib/ose/test/Makefile b/lib/ose/test/Makefile deleted file mode 100644 index 7e2080ba38..0000000000 --- a/lib/ose/test/Makefile +++ /dev/null @@ -1,67 +0,0 @@ -include $(ERL_TOP)/make/target.mk -include $(ERL_TOP)/make/$(TARGET)/otp.mk - -# ---------------------------------------------------- -# Target Specs -# ---------------------------------------------------- - -MODULES= \ - ose_SUITE - -ERL_FILES= $(MODULES:%=%.erl) - -TARGET_FILES= $(MODULES:%=$(EBIN)/%.$(EMULATOR)) - -INSTALL_PROGS= $(TARGET_FILES) - -# ---------------------------------------------------- -# Release directory specification -# ---------------------------------------------------- -RELSYSDIR = $(RELEASE_PATH)/ose_test - -# ---------------------------------------------------- -# FLAGS -# ---------------------------------------------------- - -ERL_MAKE_FLAGS += -ERL_COMPILE_FLAGS += -I$(ERL_TOP)/lib/test_server/include \ - -I$(ERL_TOP)/lib/kernel/include - -EBIN = . - -EMAKEFILE=Emakefile -COVERFILE=ose.cover - -# ---------------------------------------------------- -# Targets -# ---------------------------------------------------- - -make_emakefile: - $(ERL_TOP)/make/make_emakefile $(ERL_COMPILE_FLAGS) -o$(EBIN) $(MODULES) \ - > $(EMAKEFILE) - -tests debug opt: make_emakefile - erl $(ERL_MAKE_FLAGS) -make - -clean: - rm -f $(EMAKEFILE) - rm -f $(TARGET_FILES) - rm -f core - -docs: - -# ---------------------------------------------------- -# Release Target -# ---------------------------------------------------- -include $(ERL_TOP)/make/otp_release_targets.mk - -release_spec: opt - -release_tests_spec: make_emakefile - $(INSTALL_DIR) "$(RELSYSDIR)" - $(INSTALL_DATA) ose.spec $(EMAKEFILE) \ - $(ERL_FILES) $(COVERFILE) "$(RELSYSDIR)" - chmod -R u+w "$(RELSYSDIR)" - @tar cf - *_SUITE_data | (cd "$(RELSYSDIR)"; tar xf -) - -release_docs_spec: diff --git a/lib/ose/test/ose.cover b/lib/ose/test/ose.cover deleted file mode 100644 index 7b846cfaf6..0000000000 --- a/lib/ose/test/ose.cover +++ /dev/null @@ -1,2 +0,0 @@ -%% -*- erlang -*- -{incl_app,ose,details}. diff --git a/lib/ose/test/ose.spec b/lib/ose/test/ose.spec deleted file mode 100644 index c897e8cd16..0000000000 --- a/lib/ose/test/ose.spec +++ /dev/null @@ -1 +0,0 @@ -{suites,"../ose_test",all}. diff --git a/lib/ose/test/ose_SUITE.erl b/lib/ose/test/ose_SUITE.erl deleted file mode 100644 index 31d950bd03..0000000000 --- a/lib/ose/test/ose_SUITE.erl +++ /dev/null @@ -1,766 +0,0 @@ -%% -%% %CopyrightBegin% -%% -%% Copyright Ericsson AB 1998-2013. All Rights Reserved. -%% -%% Licensed under the Apache License, Version 2.0 (the "License"); -%% you may not use this file except in compliance with the License. -%% You may obtain a copy of the License at -%% -%% http://www.apache.org/licenses/LICENSE-2.0 -%% -%% Unless required by applicable law or agreed to in writing, software -%% distributed under the License is distributed on an "AS IS" BASIS, -%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -%% See the License for the specific language governing permissions and -%% limitations under the License. -%% -%% %CopyrightEnd% -%% --module(ose_SUITE). - -%-compile(export_all). - --export([all/0, suite/0,groups/0,init_per_suite/1, end_per_suite/1, - init_per_group/2,end_per_group/2,init_per_testcase/2, - end_per_testcase/2]). --export([ - basic/1,stress/1,multi_msg_numbers/1,multi_mailboxes/1, - hunt/1,multi_hunt/1,dehunt/1,multi_dehunt/1, - attach/1,multi_attach/1,detach/1,multi_detach/1, - open_errors/1,close_errors/1,get_id_errors/1,get_name_errors/1, - hunt_errors/1,dehunt_errors/1,attach_errors/1,detach_errors/1, - send_errors/1,send_w_s_errors/1,listen_errors/1 - ]). - --define(INTERFACE,ose). - - -init_per_testcase(_Func, Config) -> - Config. -end_per_testcase(_Func, _Config) -> - ok. - -suite() -> [{timeout,{30,seconds}}]. - -all() -> - [ - basic,stress,multi_msg_numbers,multi_mailboxes, - hunt,multi_hunt,dehunt,multi_dehunt, - attach,multi_attach,detach,multi_detach, - - open_errors,close_errors,get_id_errors,get_name_errors, - hunt_errors,dehunt_errors,attach_errors,detach_errors, - send_errors,send_w_s_errors,listen_errors - ]. - -groups() -> - []. - -init_per_suite(Config) -> - case os:type() of - {ose,_} -> - Config; - _Else -> - {skip,"Only run on OSE"} - end. - -end_per_suite(_Config) -> - ok. - -init_per_group(_GroupName, Config) -> - Config. - -end_per_group(_GroupName, Config) -> - Config. - -basic(_Config) -> - - [P1,P2] = multi_open(2,[42]), - P1Id = ?INTERFACE:get_id(P1), - P2Id = ?INTERFACE:get_id(P2), - - ok = ?INTERFACE:send(P2,P1Id,42,<<"ping">>), - receive - {message,P1,V1} -> - {P2Id,P1Id,42,<<"ping">>} = V1, - ?INTERFACE:send(P1,P2Id,42,<<"pong">>); - Else1 -> - ct:fail({got_wrong_message,Else1}) - end, - - receive - {message,P2,V2} -> - {P1Id,P2Id,42,<<"pong">>} = V2; - Else2 -> - ct:fail({got_wrong_message,Else2}) - end, - - ?INTERFACE:close(P1), - ?INTERFACE:close(P2). - -%% Send 1000 messages and see if we can cope and that msg order is preserved -stress(_Config) -> - - Iterations = 1000, - - [P1,P2] = multi_open(2,[42]), - P1Id = ?INTERFACE:get_id(P1), - P2Id = ?INTERFACE:get_id(P2), - - spawn(fun() -> - n(fun(N) -> - Msg = [<<"ping">>|integer_to_list(N)], - ?INTERFACE:send(P2,P1Id,42,Msg) - end,Iterations) - end), - timer:sleep(100), - n(fun(N) -> - receive - {message,P1,Value} -> - Int = integer_to_binary(N), - {P2Id,P1Id,42,<<"ping",Int/binary>>} = Value, - ok; - Else -> - ct:fail({got_wrong_message,Else}) - end - end,Iterations), - - ?INTERFACE:close(P1), - ?INTERFACE:close(P2). - -%% Listen to 1000 different message numbers and send some random messages -multi_msg_numbers(_Config) -> - - Iterations = 100, - - [P1,P2] = multi_open(2,lists:seq(2000,3000)), - P1Id = ?INTERFACE:get_id(P1), - - n(fun(_) -> - Num = random:uniform(1000)+2000, - ?INTERFACE:send(P2,P1Id,Num,<<"ping",(integer_to_binary(Num))/binary>>) - end,Iterations), - - n(fun(_) -> - receive - {message,P1,{_,_,Id,<<"ping",Num/binary>>}} when Id > 2000; - Id =< 3000 -> - Id = binary_to_integer(Num), - ok; - Else -> - ct:fail({got_wrong_message,Else}) - end - end,Iterations), - - ?INTERFACE:close(P1), - ?INTERFACE:close(P2). - - -%% Create 100 mailboxes and send messages to them -multi_mailboxes(_Config) -> - - Mailboxes = 100, - - [P1|MBs] = multi_open(Mailboxes,[42]), - - [?INTERFACE:send(P1,?INTERFACE:get_id(P),42,[<<"ping">>,?INTERFACE:get_name(P,?INTERFACE:get_id(P))]) || P <- MBs], - - [receive - {message,P,Value} -> - Name = ?INTERFACE:get_name(P,?INTERFACE:get_id(P)), - {_,_,42,<<"ping",Name/binary>>} = Value, - ok - end || P <- MBs], - - [?INTERFACE:close(P) || P <- [P1|MBs]], - ok. - -hunt(_Config) -> - [P1,P2] = multi_open(2,[]), - - Ref = ?INTERFACE:hunt(P1,"p2"), - receive - {mailbox_up,P1,Ref,Pid} -> - Pid = ?INTERFACE:get_id(P2), - ?INTERFACE:close(P1), - ?INTERFACE:close(P2); - Else -> - ct:fail({got_wrong_message,Else,Ref}) - end. - -multi_hunt(_Config) -> - - Iterations = 100, - - P = ?INTERFACE:open("p"), - - Refs = [?INTERFACE:hunt(P,"p"++integer_to_list(N))|| N <- lists:seq(1,Iterations)], - - Pids = [begin - Prt = ?INTERFACE:open("p"++integer_to_list(N)), - Pid = ?INTERFACE:get_id(Prt), - ?INTERFACE:close(Prt), - Pid - end || N <- lists:seq(1,Iterations)], - - [receive - {mailbox_up,P,Ref,Pid} -> - ok - after 10 -> - ct:fail({did_not_get,Pid,Ref}) - end || {Pid,Ref} <- lists:zip(Pids,Refs)], - ?INTERFACE:close(P). - - -dehunt(_Config) -> - [P1] = multi_open(1,[]), - Ref = ?INTERFACE:hunt(P1,"p2"), - receive - _Else -> ct:fail({got,_Else}) - after 1000 -> - ok - end, - P2 = ?INTERFACE:open("p2"), - - % Make sure any messages are sent - receive after 10 -> ok end, - - ok = ?INTERFACE:dehunt(P1,Ref), - - % Make sure no messages are received - receive - _Else2 -> ct:fail({got,_Else2}) - after 1000 -> - ?INTERFACE:close(P1), - ?INTERFACE:close(P2) - end. - -%%% -%%% This testcase basically: -%%% spawn 10 processes that in parallel -%%% adds some hunts for different OSE processes -%%% maybe create hunted OSE process -%%% dehunt half of the hunts -%%% create more hunts -%%% if not created create hunted OSE process -%%% veryify that all expected hunt messages are received -%%% verify that all processes exited correctly -%%% -%%% This complex test is done to make sure that the internal handling -%%% of dehunt works as expected. -%%% -multi_dehunt(_Config) -> - [P1] = multi_open(1,[]), - - Scenario = - fun(Iterations) -> - - Hunted = "p"++integer_to_list(Iterations), - %% Start a couple of hunts - Refs = [?INTERFACE:hunt(P1,Hunted) || _ <- lists:seq(1,Iterations)], - - %% We alternate if the process is opened before or after the dehunt - P2O = if Iterations rem 2 == 0 -> - ?INTERFACE:open(Hunted); - true -> - undefined - end, - - %% Remove half of them - {RemRefs,_} = lists:mapfoldl(fun(Ref,Acc) when Acc rem 2 == 0 -> - ok = ?INTERFACE:dehunt(P1,Ref), - {[],Acc+1}; - (Ref,Acc) -> - {Ref,Acc+1} - end,0,Refs), - - %% Add some new ones - NewRefs = [?INTERFACE:hunt(P1,Hunted) - || _ <- lists:seq(1,Iterations div 4)] - ++ lists:flatten(RemRefs), - - P2 = if P2O == undefined -> - ?INTERFACE:open(Hunted); - true -> - P2O - end, - P2Id = ?INTERFACE:get_id(P2), - - %% Receive all the expected ones - lists:foreach(fun(Ref) -> - receive - {mailbox_up,P1,Ref,P2Id} -> - ok - after 1000 -> - io:format("Flush: ~p~n",[flush()]), - io:format("~p~n",[{Iterations,{did_not_get, Ref}}]), - ok = Ref - end - end,NewRefs), - - %% Check that no other have arrived - receive - _Else -> - io:format("Flush: ~p~n",[flush()]), - io:format("~p~n",[{Iterations,{got, _Else}}]), - ok = _Else - after 100 -> - ok - end, - ?INTERFACE:close(P2) - end, - - Self = self(), - - n(fun(N) -> - spawn(fun() -> Self ! - Scenario(N*25) - end), - ok - end,10), - - n(fun(_N) -> - receive ok -> ok - after 60000 -> ct:fail(failed) - end - end,10), - ?INTERFACE:close(P1). - -attach(_Config) -> - [P1,P2] = multi_open(2,[]), - - P2Id = ?INTERFACE:get_id(P2), - Ref = ?INTERFACE:attach(P1,P2Id), - ?INTERFACE:close(P2), - receive - {mailbox_down,P1,Ref,P2Id} -> - ?INTERFACE:close(P1); - _Else -> - ct:fail({got,_Else, {P1,Ref,P2Id}}) - after 1000 -> - ct:fail({did_not_get,P1,Ref,P2Id}) - end. - -multi_attach(_Config) -> - - Iterations = 100, - - [P1|Pids] = multi_open(Iterations,[]), - - Refs = [{?INTERFACE:get_id(Pid),?INTERFACE:attach(P1,?INTERFACE:get_id(Pid))} || Pid <- Pids], - - [?INTERFACE:close(Pid) || Pid <- Pids], - - [receive - {mailbox_down,P1,Ref,Pid} -> - ok - after 10000 -> - ct:fail({did_not_get,Pid,Ref}) - end || {Pid,Ref} <- Refs], - ?INTERFACE:close(P1). - -detach(_Config) -> - [P1,P2] = multi_open(2,[]), - P2Id = ?INTERFACE:get_id(P2), - Ref = ?INTERFACE:attach(P1,P2Id), - receive - _Else -> ct:fail({got,_Else}) - after 100 -> - ok - end, - - ?INTERFACE:close(P2), - - % Make sure any messages are sent - receive after 10 -> ok end, - - ?INTERFACE:detach(P1,Ref), - - % Make sure no messages are received - receive - _Else2 -> ct:fail({got,_Else2}) - after 1000 -> - ?INTERFACE:close(P1) - end. - -%%% -%%% This testcase basically: -%%% spawn 10 processes that in parallel -%%% adds some attach for different OSE processes -%%% maybe close OSE process -%%% dehunt half of the hunts -%%% create more hunts -%%% if not closed close attached OSE process -%%% veryify that all expected attach messages are received -%%% verify that all processes exited correctly -%%% -%%% This complex test is done to make sure that the internal handling -%%% of dehunt works as expected. -%%% -multi_detach(_Config) -> - [P1] = multi_open(1,[]), - - Scenario = - fun(Iterations) -> - - Attached = ?INTERFACE:open("p"++integer_to_list(Iterations)), - AttachedId = ?INTERFACE:get_id(Attached), - %% Start a couple of attachs - Refs = [?INTERFACE:attach(P1,AttachedId) || _ <- lists:seq(1,Iterations)], - - %% We alternate if the process is closed before or after the detach - P2O = if Iterations rem 2 == 0 -> - ?INTERFACE:close(Attached); - true -> - undefined - end, - - %% Remove half of them - {RemRefs,_} = lists:mapfoldl(fun(Ref,Acc) when Acc rem 2 == 0 -> - ok = ?INTERFACE:detach(P1,Ref), - {[],Acc+1}; - (Ref,Acc) -> - {Ref,Acc+1} - end,0,Refs), - - %% Add some new ones - NewRefs = [?INTERFACE:attach(P1,AttachedId) - || _ <- lists:seq(1,Iterations div 4)] - ++ lists:flatten(RemRefs), - - if P2O == undefined -> - ?INTERFACE:close(Attached); - true -> - P2O - end, - - %% Receive all the expected ones - lists:foreach(fun(Ref) -> - receive - {mailbox_down,P1,Ref,AttachedId} -> - ok - after 1000 -> - io:format("Flush: ~p~n",[flush()]), - io:format("~p~n",[{Iterations,{did_not_get, Ref}}]), - ok = Ref - end - end,NewRefs), - - %% Check that no other have arrived - receive - _Else -> - io:format("Flush: ~p~n",[flush()]), - io:format("~p~n",[{Iterations,{got, _Else}}]), - ok = _Else - after 100 -> - ok - end - end, - - Self = self(), - - n(fun(N) -> - spawn(fun() -> Self ! - Scenario(N*5) - end), - ok - end,10), - - n(fun(_N) -> - receive ok -> ok - after 60000 -> ct:fail(failed) - end - end,10), - ?INTERFACE:close(P1). - - -open_errors(_Config) -> - {'EXIT',{badarg,[{?INTERFACE,open,[inval],_}|_]}} = - (catch ?INTERFACE:open(inval)), - {'EXIT',{badarg,[{?INTERFACE,open,[["p"|1]],_}|_]}} = - (catch ?INTERFACE:open(["p"|1])), - {'EXIT',{badarg,[{?INTERFACE,open,[["p",1234]],_}|_]}} = - (catch ?INTERFACE:open(["p",1234])), - - ok. - -close_errors(_Config) -> - {'EXIT',{badarg,[{?INTERFACE,close,[inval],_}|_]}} = - (catch ?INTERFACE:close(inval)), - - P1 = ?INTERFACE:open("p1"), - ok = ?INTERFACE:close(P1), - ok = ?INTERFACE:close(P1). - - -get_id_errors(_Config) -> - {'EXIT',{badarg,[{?INTERFACE,get_id,[inval],_}|_]}} = - (catch ?INTERFACE:get_id(inval)), - - P1 = ?INTERFACE:open("p1"), - ok = ?INTERFACE:close(P1), - {'EXIT',{badarg,[{?INTERFACE,get_id,[P1],_}|_]}} = - (catch ?INTERFACE:get_id(P1)), - - ok. - -get_name_errors(_Config) -> - P1 = ?INTERFACE:open("p1"), - {'EXIT',{badarg,[{?INTERFACE,get_name,[P1,inval],_}|_]}} = - (catch ?INTERFACE:get_name(P1,inval)), - - undefined = ?INTERFACE:get_name(P1,1234), - - P2 = ?INTERFACE:open("p2"), - P2Id = ?INTERFACE:get_id(P2), - ok = ?INTERFACE:close(P1), - {'EXIT',{badarg,[{?INTERFACE,get_name,[P1,P2Id],_}|_]}} = - (catch ?INTERFACE:get_name(P1,P2Id)), - ?INTERFACE:close(P2), - - P3 = ?INTERFACE:open([255]), - <<255>> = ?INTERFACE:get_name(P3, ?INTERFACE:get_id(P3)), - ?INTERFACE:close(P3), - - ok. - -hunt_errors(_Config) -> - - {'EXIT',{badarg,[{?INTERFACE,hunt,[inval,"hello"],_}|_]}} = - (catch ?INTERFACE:hunt(inval,"hello")), - - P1 = ?INTERFACE:open("p1"), - {'EXIT',{badarg,[{?INTERFACE,hunt,[P1,["hello",12345]],_}|_]}} = - (catch ?INTERFACE:hunt(P1,["hello",12345])), - - P2 = ?INTERFACE:open(<<255>>), - P2Pid = ?INTERFACE:get_id(P2), - Ref = ?INTERFACE:hunt(P1,[255]), - receive - {mailbox_up,P1,Ref,P2Pid} -> - ok; - Else -> - ct:fail({got,Else,{mailbox_up,P1,Ref,P2Pid}}) - after 150 -> - ct:fail({did_not_get,{mailbox_up,P1,Ref,P2Pid}}) - end, - - ok = ?INTERFACE:close(P1), - ok = ?INTERFACE:close(P2), - {'EXIT',{badarg,[{?INTERFACE,hunt,[P1,["hello"]],_}|_]}} = - (catch ?INTERFACE:hunt(P1,["hello"])), - - ok. - -dehunt_errors(_Config) -> - P1 = ?INTERFACE:open("p1"), - Ref = ?INTERFACE:hunt(P1,"p2"), - - {'EXIT',{badarg,[{?INTERFACE,dehunt,[inval,Ref],_}|_]}} = - (catch ?INTERFACE:dehunt(inval,Ref)), - - {'EXIT',{badarg,[{?INTERFACE,dehunt,[P1,inval],_}|_]}} = - (catch ?INTERFACE:dehunt(P1,inval)), - - ok = ?INTERFACE:dehunt(P1,Ref), - ok = ?INTERFACE:dehunt(P1,Ref), - - ok = ?INTERFACE:close(P1), - - {'EXIT',{badarg,[{?INTERFACE,dehunt,[P1,Ref],_}|_]}} = - (catch ?INTERFACE:dehunt(P1,Ref)), - - case ?INTERFACE of - ose -> ok; - _ -> - P2 = ?INTERFACE:open("p2"), - ok = ?INTERFACE:close(P2) - end, - - receive - Else -> ct:fail({got,Else}) - after 100 -> - ok - end. - -attach_errors(_Config) -> - P1 = ?INTERFACE:open("p1"), - P2 = ?INTERFACE:open("p2"), - P2Id = ?INTERFACE:get_id(P2), - - {'EXIT',{badarg,[{?INTERFACE,attach,[inval,P2Id],_}|_]}} = - (catch ?INTERFACE:attach(inval,P2Id)), - - {'EXIT',{badarg,[{?INTERFACE,attach,[P1,[12345]],_}|_]}} = - (catch ?INTERFACE:attach(P1,[12345])), - - ok = ?INTERFACE:close(P1), - ok = ?INTERFACE:close(P2), - {'EXIT',{badarg,[{?INTERFACE,attach,[P1,P2Id],_}|_]}} = - (catch ?INTERFACE:attach(P1,P2Id)), - - ok. - -detach_errors(_Config) -> - P1 = ?INTERFACE:open("p1"), - P2 = ?INTERFACE:open("p2"), - P2Id = ?INTERFACE:get_id(P2), - - Ref = ?INTERFACE:attach(P1,P2Id), - - {'EXIT',{badarg,[{?INTERFACE,detach,[inval,Ref],_}|_]}} = - (catch ?INTERFACE:detach(inval,Ref)), - - {'EXIT',{badarg,[{?INTERFACE,detach,[P1,inval],_}|_]}} = - (catch ?INTERFACE:detach(P1,inval)), - - ok = ?INTERFACE:detach(P1,Ref), - ok = ?INTERFACE:detach(P1,Ref), - - case ?INTERFACE of - ose -> ok; - _ -> - ok = ?INTERFACE:close(P1) - end, - - ok = ?INTERFACE:close(P2), - ok = ?INTERFACE:close(P1), - - {'EXIT',{badarg,[{?INTERFACE,detach,[P1,Ref],_}|_]}} = - (catch ?INTERFACE:detach(P1,Ref)), - - receive - Else -> ct:fail({got,Else}) - after 100 -> - ok - end. - -send_errors(_Config) -> - P1 = ?INTERFACE:open("p1"), - P2 = ?INTERFACE:open("p2"), - P2Id = ?INTERFACE:get_id(P2), - - {'EXIT',{badarg,[{?INTERFACE,send,[inval,P2Id,42,"hello"],_}|_]}} = - (catch ?INTERFACE:send(inval,P2Id,42,"hello")), - {'EXIT',{badarg,[{?INTERFACE,send,[P1,inval,42,"hello"],_}|_]}} = - (catch ?INTERFACE:send(P1,inval,42,"hello")), - {'EXIT',{badarg,[{?INTERFACE,send,[P1,P2Id,inval,"hello"],_}|_]}} = - (catch ?INTERFACE:send(P1,P2Id,inval,"hello")), - {'EXIT',{badarg,[{?INTERFACE,send,[P1,P2Id,42,inval],_}|_]}} = - (catch ?INTERFACE:send(P1,P2Id,42,inval)), - - ok = ?INTERFACE:close(P2), - ok = ?INTERFACE:send(P1,P2Id,42,"hello"), - ok = ?INTERFACE:close(P1), - - {'EXIT',{badarg,[{?INTERFACE,send,[P1,P2Id,42,"hello"],_}|_]}} = - (catch ?INTERFACE:send(P1,P2Id,42,"hello")), - - receive - Else -> ct:fail({got,Else}) - after 100 -> - ok - end. - -send_w_s_errors(_Config) -> - P1 = ?INTERFACE:open("p1"), - P1Id = ?INTERFACE:get_id(P1), - P2 = ?INTERFACE:open("p2"), - P2Id = ?INTERFACE:get_id(P2), - P3 = ?INTERFACE:open("p3"), - P3Id = ?INTERFACE:get_id(P3), - - {'EXIT',{badarg,[{?INTERFACE,send,[inval,P2Id,P1Id,42,"hello"],_}|_]}} = - (catch ?INTERFACE:send(inval,P2Id,P1Id,42,"hello")), - {'EXIT',{badarg,[{?INTERFACE,send,[P2,-1,P1Id,42,"hello"],_}|_]}} = - (catch ?INTERFACE:send(P2,-1,P1Id,42,"hello")), - {'EXIT',{badarg,[{?INTERFACE,send,[P2,P2Id,1 bsl 32,42,"hello"],_}|_]}} = - (catch ?INTERFACE:send(P2,P2Id,1 bsl 32,42,"hello")), - {'EXIT',{badarg,[{?INTERFACE,send,[P2,P2Id,P1Id,inval,"hello"],_}|_]}} = - (catch ?INTERFACE:send(P2,P2Id,P1Id,inval,"hello")), - {'EXIT',{badarg,[{?INTERFACE,send,[P2,P2Id,P1Id,42,inval],_}|_]}} = - (catch ?INTERFACE:send(P2,P2Id,P1Id,42,inval)), - - ok = ?INTERFACE:close(P3), - ok = ?INTERFACE:send(P2,P3Id,P1Id,42,"hello"), - - ok = ?INTERFACE:close(P1), - ok = ?INTERFACE:send(P2,P2Id,P1Id,42,"hello"), - ok = ?INTERFACE:close(P2), - - {'EXIT',{badarg,[{?INTERFACE,send,[P1,P2Id,P1Id,42,"hello"],_}|_]}} = - (catch ?INTERFACE:send(P1,P2Id,P1Id,42,"hello")), - - receive - Else -> ct:fail({got,Else}) - after 100 -> - ok - end. - -listen_errors(_Config) -> - - P1 = ?INTERFACE:open("p1"), - P1Id = ?INTERFACE:get_id(P1), - - {'EXIT',{badarg,[{?INTERFACE,listen,[inval,[42]],_}|_]}} = - (catch ?INTERFACE:listen(inval,[42])), - {'EXIT',{badarg,[{?INTERFACE,listen,[P1,inval],_}|_]}} = - (catch ?INTERFACE:listen(P1,inval)), - {'EXIT',{badarg,[{?INTERFACE,listen,[P1,[1 bsl 33]],_}|_]}} = - (catch ?INTERFACE:listen(P1,[1 bsl 33])), - - ok = ?INTERFACE:listen(P1,[42,42,42,42,42,42,42,42,42,42,42,42,42]), - - case ?INTERFACE of - ose -> ok; - _ -> - ?INTERFACE:send(P1,P1Id,42,"hello"), - timer:sleep(50), - ?INTERFACE:listen(P1,[]), - ?INTERFACE:send(P1,P1Id,42,"hello2"), - - receive - {message,P1,42,"hello"} -> ok - end, - - receive - Else -> ct:fail({got,Else}) - after 100 -> - ok - end - end, - - ok = ?INTERFACE:close(P1), - {'EXIT',{badarg,[{?INTERFACE,listen,[P1,[42]],_}|_]}} = - (catch ?INTERFACE:listen(P1,[42])), - - ok. - -%% -%% Internal functions -%% -multi_open(N,ListenNums) -> - multi_open(N,ListenNums,[]). - -multi_open(0,_,Acc) -> - Acc; -multi_open(N,ListenNums,Acc) -> - P = ?INTERFACE:open("p"++integer_to_list(N)), - ok = ?INTERFACE:listen(P,ListenNums), - multi_open(N-1,ListenNums,[P|Acc]). - -n(_F,0) -> - ok; -n(F,N) -> - ok = F(N), - n(F,N-1). - - -flush() -> - receive - Msg -> - [Msg|flush()] - after 0 -> - [] - end. diff --git a/lib/ose/vsn.mk b/lib/ose/vsn.mk deleted file mode 100644 index fb1cf8219f..0000000000 --- a/lib/ose/vsn.mk +++ /dev/null @@ -1 +0,0 @@ -OSE_VSN = 1.1 diff --git a/lib/runtime_tools/c_src/Makefile.in b/lib/runtime_tools/c_src/Makefile.in index 448b8c62c2..aeacee0655 100644 --- a/lib/runtime_tools/c_src/Makefile.in +++ b/lib/runtime_tools/c_src/Makefile.in @@ -102,12 +102,7 @@ endif _create_dirs := $(shell mkdir -p $(OBJDIR) $(LIBDIR)) -ifneq ($(findstring ose,$(TARGET)),ose) debug opt valgrind: $(SOLIBS) $(OBJDIR) $(LIBDIR) $(NIF_LIB) -else -# We do not build this on OSE -debug opt valgrind: -endif DYNTRACE_OBJS = $(before_DTrace_OBJS) @@ -159,10 +154,8 @@ include $(ERL_TOP)/make/otp_release_targets.mk release_spec: opt $(INSTALL_DIR) "$(RELSYSDIR)/priv/obj" $(INSTALL_DIR) "$(RELSYSDIR)/priv/lib" -ifneq ($(findstring ose,$(TARGET)),ose) $(INSTALL_PROGRAM) $(DYNTRACE_OBJS) "$(RELSYSDIR)/priv/obj" $(INSTALL_PROGRAM) $(NIF_LIB) $(SOLIBS) "$(RELSYSDIR)/priv/lib" -endif release_docs_spec: diff --git a/lib/ssh/test/ssh_upgrade_SUITE.erl b/lib/ssh/test/ssh_upgrade_SUITE.erl index 85f4d36258..0d936c118b 100644 --- a/lib/ssh/test/ssh_upgrade_SUITE.erl +++ b/lib/ssh/test/ssh_upgrade_SUITE.erl @@ -46,20 +46,17 @@ all() -> init_per_suite(Config0) -> catch crypto:stop(), - try {crypto:start(), erlang:system_info({wordsize, internal}) == - erlang:system_info({wordsize, external})} of - {ok, true} -> - case ct_release_test:init(Config0) of - {skip, Reason} -> - {skip, Reason}; - Config -> - ssh:start(), - Config - end; - {ok, false} -> - {skip, "Test server will not handle halfwordemulator correctly. Skip as halfwordemulator is deprecated"} + try crypto:start() of + ok -> + case ct_release_test:init(Config0) of + {skip, Reason} -> + {skip, Reason}; + Config -> + ssh:start(), + Config + end catch _:_ -> - {skip, "Crypto did not start"} + {skip, "Crypto did not start"} end. end_per_suite(Config) -> diff --git a/lib/ssl/test/ssl_upgrade_SUITE.erl b/lib/ssl/test/ssl_upgrade_SUITE.erl index d65bdf6983..f5f4b25b23 100644 --- a/lib/ssl/test/ssl_upgrade_SUITE.erl +++ b/lib/ssl/test/ssl_upgrade_SUITE.erl @@ -40,20 +40,19 @@ all() -> init_per_suite(Config0) -> catch crypto:stop(), - try {crypto:start(), erlang:system_info({wordsize, internal}) == erlang:system_info({wordsize, external})} of - {ok, true} -> - case ct_release_test:init(Config0) of - {skip, Reason} -> - {skip, Reason}; - Config -> - {ok, _} = make_certs:all(?config(data_dir, Config), - ?config(priv_dir, Config)), - ssl_test_lib:cert_options(Config) - end; - {ok, false} -> - {skip, "Test server will not handle halfwordemulator correctly. Skip as halfwordemulator is deprecated"} + try crypto:start() of + ok -> + case ct_release_test:init(Config0) of + {skip, Reason} -> + {skip, Reason}; + Config -> + Result = + {ok, _} = make_certs:all(?config(data_dir, Config), + ?config(priv_dir, Config)), + ssl_test_lib:cert_options(Config) + end catch _:_ -> - {skip, "Crypto did not start"} + {skip, "Crypto did not start"} end. end_per_suite(Config) -> diff --git a/lib/stdlib/doc/src/erl_scan.xml b/lib/stdlib/doc/src/erl_scan.xml index 18e988e286..01b845a039 100644 --- a/lib/stdlib/doc/src/erl_scan.xml +++ b/lib/stdlib/doc/src/erl_scan.xml @@ -40,39 +40,15 @@ </description> <datatypes> <datatype> - <name name="attribute_info"></name> - </datatype> - <datatype> - <name name="attributes"></name> - </datatype> - <datatype> - <name name="attributes_data"></name> - </datatype> - <datatype> <name name="category"></name> </datatype> <datatype> - <name name="column"></name> - </datatype> - <datatype> <name name="error_description"></name> </datatype> <datatype> <name name="error_info"></name> </datatype> <datatype> - <name name="info_line"></name> - </datatype> - <datatype> - <name name="info_location"></name> - </datatype> - <datatype> - <name name="line"></name> - </datatype> - <datatype> - <name name="location"></name> - </datatype> - <datatype> <name name="option"></name> </datatype> <datatype> @@ -88,9 +64,6 @@ <name name="token"></name> </datatype> <datatype> - <name name="token_info"></name> - </datatype> - <datatype> <name name="tokens"></name> </datatype> <datatype> @@ -122,25 +95,23 @@ <anno>StartLocation</anno>, [])</c>.</p> <p><c><anno>StartLocation</anno></c> indicates the initial location when scanning starts. If <c><anno>StartLocation</anno></c> is a line, - <c>attributes()</c> as well as <c><anno>EndLocation</anno></c> and + <c>Anno</c> as well as <c><anno>EndLocation</anno></c> and <c><anno>ErrorLocation</anno></c> will be lines. If <c><anno>StartLocation</anno></c> is a pair of a line and a column - <c>attributes()</c> takes the form of an opaque compound + <c>Anno</c> takes the form of an opaque compound data type, and <c><anno>EndLocation</anno></c> and <c><anno>ErrorLocation</anno></c> will be pairs of a line and a column. The <em>token - attributes</em> contain information about the column and the + annotations</em> contain information about the column and the line where the token begins, as well as the text of the token (if the <c>text</c> option is given), all of which can - be accessed by calling <seealso - marker="#token_info/1">token_info/1,2</seealso>, <seealso - marker="#attributes_info/1">attributes_info/1,2</seealso>, + be accessed by calling <seealso marker="#column/1">column/1</seealso>, <seealso marker="#line/1">line/1</seealso>, <seealso marker="#location/1">location/1</seealso>, and <seealso marker="#text/1">text/1</seealso>.</p> <p>A <em>token</em> is a tuple containing information about - syntactic category, the token attributes, and the actual + syntactic category, the token annotations, and the actual terminal symbol. For punctuation characters (e.g. <c>;</c>, <c>|</c>) and reserved words, the category and the symbol coincide, and the token is represented by a two-tuple. @@ -172,7 +143,7 @@ <item><p>Short for <c>[return_comments, return_white_spaces]</c>.</p> </item> <tag><c>text</c></tag> - <item><p>Include the token's text in the token attributes. The + <item><p>Include the token's text in the token annotation. The text is the part of the input corresponding to the token.</p> </item> </taglist> @@ -306,150 +277,6 @@ </desc> </func> <func> - <name name="token_info" arity="1"/> - <fsummary>Return information about a token</fsummary> - <desc> - <p>Returns a list containing information about the token - <c><anno>Token</anno></c>. The order of the - <c><anno>TokenInfoTuple</anno></c>s is not - defined. See <seealso - marker="#token_info/2">token_info/2</seealso> for - information about specific - <c><anno>TokenInfoTuple</anno></c>s.</p> - <p>Note that if <c>token_info(Token, TokenItem)</c> returns - <c>undefined</c> for some <c>TokenItem</c>, the - item is not included in <c><anno>TokenInfo</anno></c>.</p> - </desc> - </func> - <func> - <name name="token_info" arity="2" clause_i="1"/> - <name name="token_info" arity="2" clause_i="2"/> - <type name="token_item"/> - <type name="attribute_item"/> - <fsummary>Return information about a token</fsummary> - <desc> - <p>Returns a list containing information about the token - <c><anno>Token</anno></c>. If one single - <c><anno>TokenItem</anno></c> is given the returned value is - the corresponding - <c>TokenInfoTuple</c>, or <c>undefined</c> if the - <c>TokenItem</c> has no value. If a list of - <c><anno>TokenItem</anno></c>s is given the result is a list of - <c><anno>TokenInfoTuple</anno></c>. The - <c><anno>TokenInfoTuple</anno></c>s will - appear with the corresponding <c><anno>TokenItem</anno></c>s in - the same order as the <c><anno>TokenItem</anno></c>s - appear in the list of <c>TokenItem</c>s. - <c><anno>TokenItem</anno></c>s with no value are not included - in the list of <c><anno>TokenInfoTuple</anno></c>.</p> - <p>The following <c><anno>TokenInfoTuple</anno></c>s with corresponding - <c><anno>TokenItem</anno></c>s are valid:</p> - <taglist> - <tag><c>{category, <seealso marker="#type-category"> - category()</seealso>}</c></tag> - <item><p>The category of the token.</p> - </item> - <tag><c>{column, <seealso marker="#type-column"> - column()</seealso>}</c></tag> - <item><p>The column where the token begins.</p> - </item> - <tag><c>{length, integer() > 0}</c></tag> - <item><p>The length of the token's text.</p> - </item> - <tag><c>{line, <seealso marker="#type-line"> - line()</seealso>}</c></tag> - <item><p>The line where the token begins.</p> - </item> - <tag><c>{location, <seealso marker="#type-location"> - location()</seealso>}</c></tag> - <item><p>The line and column where the token begins, or - just the line if the column unknown.</p> - </item> - <tag><c>{symbol, <seealso marker="#type-symbol"> - symbol()</seealso>}</c></tag> - <item><p>The token's symbol.</p> - </item> - <tag><c>{text, string()}</c></tag> - <item><p>The token's text.</p> - </item> - </taglist> - </desc> - </func> - <func> - <name name="attributes_info" arity="1"/> - <fsummary>Return information about token attributes</fsummary> - <desc> - <p>Returns a list containing information about the token - attributes <c><anno>Attributes</anno></c>. The order of the - <c><anno>AttributeInfoTuple</anno></c>s is not defined. - See <seealso - marker="#attributes_info/2">attributes_info/2</seealso> for - information about specific - <c><anno>AttributeInfoTuple</anno></c>s.</p> - <p>Note that if <c>attributes_info(Token, AttributeItem)</c> - returns <c>undefined</c> for some <c>AttributeItem</c> in - the list above, the item is not included in - <c><anno>AttributesInfo</anno></c>.</p> - </desc> - </func> - <func> - <name name="attributes_info" arity="2" clause_i="1"/> - <name name="attributes_info" arity="2" clause_i="2"/> - <fsummary>Return information about a token attributes</fsummary> - <type name="attribute_item"/> - <desc> - <p>Returns a list containing information about the token - attributes <c><anno>Attributes</anno></c>. If one single - <c><anno>AttributeItem</anno></c> is given the returned value is the - corresponding <c><anno>AttributeInfoTuple</anno></c>, - or <c>undefined</c> if the <c><anno>AttributeItem</anno></c> - has no value. If a list of <c><anno>AttributeItem</anno></c> - is given the result is a list of - <c><anno>AttributeInfoTuple</anno></c>. - The <c><anno>AttributeInfoTuple</anno></c>s - will appear with the corresponding <c><anno>AttributeItem</anno></c>s - in the same order as the <c><anno>AttributeItem</anno></c>s - appear in the list of <c><anno>AttributeItem</anno></c>s. - <c><anno>AttributeItem</anno></c>s with no - value are not included in the list of - <c><anno>AttributeInfoTuple</anno></c>.</p> - <p>The following <c><anno>AttributeInfoTuple</anno></c>s with - corresponding <c><anno>AttributeItem</anno></c>s are valid:</p> - <taglist> - <tag><c>{column, <seealso marker="#type-column"> - column()</seealso>}</c></tag> - <item><p>The column where the token begins.</p> - </item> - <tag><c>{length, integer() > 0}</c></tag> - <item><p>The length of the token's text.</p> - </item> - <tag><c>{line, <seealso marker="#type-line"> - line()</seealso>}</c></tag> - <item><p>The line where the token begins.</p> - </item> - <tag><c>{location, <seealso marker="#type-location"> - location()</seealso>}</c></tag> - <item><p>The line and column where the token begins, or - just the line if the column unknown.</p> - </item> - <tag><c>{text, string()}</c></tag> - <item><p>The token's text.</p> - </item> - </taglist> - </desc> - </func> - <func> - <name name="set_attribute" arity="3"/> - <fsummary>Set a token attribute value</fsummary> - <desc> - <p>Sets the value of the <c>line</c> attribute of the token - attributes <c><anno>Attributes</anno></c>.</p> - <p>The <c><anno>SetAttributeFun</anno></c> is called with the value of - the <c>line</c> attribute, and is to return the new value of - the <c>line</c> attribute.</p> - </desc> - </func> - <func> <name name="format_error" arity="1"/> <fsummary>Format an error descriptor</fsummary> <desc> diff --git a/lib/stdlib/src/erl_anno.erl b/lib/stdlib/src/erl_anno.erl index 143318aa55..d32c34dabd 100644 --- a/lib/stdlib/src/erl_anno.erl +++ b/lib/stdlib/src/erl_anno.erl @@ -33,7 +33,7 @@ -export_type([anno_term/0]). --define(LN(L), is_integer(L)). +-define(LN(L), is_integer(L), L >= 0). -define(COL(C), (is_integer(C) andalso C >= 1)). %% Location. @@ -52,13 +52,13 @@ | {'record', record()} | {'text', string()}. --type anno() :: location() | [annotation(), ...]. +-opaque anno() :: location() | [annotation(), ...]. -type anno_term() :: term(). -type column() :: pos_integer(). -type generated() :: boolean(). -type filename() :: file:filename_all(). --type line() :: integer(). +-type line() :: non_neg_integer(). -type location() :: line() | {line(), column()}. -type record() :: boolean(). -type text() :: string(). @@ -90,9 +90,13 @@ to_term(Anno) -> -ifdef(DEBUG). from_term(Term) when is_list(Term) -> Term; +from_term(Line) when is_integer(Line), Line < 0 -> % Before OTP 19 + set_generated(true, new(-Line)); from_term(Term) -> [{location, Term}]. -else. +from_term(Line) when is_integer(Line), Line < 0 -> % Before OTP 19 + set_generated(true, new(-Line)); from_term(Term) -> Term. -endif. @@ -198,18 +202,11 @@ file(Anno) -> Anno :: anno(). generated(Line) when ?ALINE(Line) -> - Line =< 0; + false; generated({Line, Column}) when ?ALINE(Line), ?ACOLUMN(Column) -> - Line =< 0; + false; generated(Anno) -> - _ = anno_info(Anno, generated, false), - {location, Location} = lists:keyfind(location, 1, Anno), - case Location of - {Line, _Column} -> - Line =< 0; - Line -> - Line =< 0 - end. + anno_info(Anno, generated, false). -spec line(Anno) -> line() when Anno :: anno(). @@ -226,18 +223,11 @@ line(Anno) -> Anno :: anno(). location(Line) when ?ALINE(Line) -> - abs(Line); -location({Line, Column}) when ?ALINE(Line), ?ACOLUMN(Column) -> - {abs(Line), Column}; + Line; +location({Line, Column}=Location) when ?ALINE(Line), ?ACOLUMN(Column) -> + Location; location(Anno) -> - case anno_info(Anno, location) of - Line when Line < 0 -> - -Line; - {Line, Column} when Line < 0 -> - {-Line, Column}; - Location -> - Location - end. + anno_info(Anno, location). -spec record(Anno) -> record() when Anno :: anno(). @@ -270,31 +260,8 @@ set_file(File, Anno) -> Generated :: generated(), Anno :: anno(). -set_generated(true, Line) when ?ALINE(Line) -> - -abs(Line); -set_generated(false, Line) when ?ALINE(Line) -> - abs(Line); -set_generated(true, {Line, Column}) when ?ALINE(Line), - ?ACOLUMN(Column) -> - {-abs(Line),Column}; -set_generated(false, {Line, Column}) when ?ALINE(Line), - ?ACOLUMN(Column) -> - {abs(Line),Column}; set_generated(Generated, Anno) -> - _ = set(generated, Generated, Anno), - {location, Location} = lists:keyfind(location, 1, Anno), - NewLocation = - case Location of - {Line, Column} when Generated -> - {-abs(Line), Column}; - {Line, Column} when not Generated -> - {abs(Line), Column}; - Line when Generated -> - -abs(Line); - Line when not Generated -> - abs(Line) - end, - lists:keyreplace(location, 1, Anno, {location, NewLocation}). + set(generated, Generated, Anno). -spec set_line(Line, Anno) -> Anno when Line :: line(), @@ -313,38 +280,17 @@ set_line(Line, Anno) -> Anno :: anno(). set_location(Line, L) when ?ALINE(L), ?LLINE(Line) -> - new_location(fix_line(Line, L)); + new_location(Line); set_location(Line, {L, Column}) when ?ALINE(L), ?ACOLUMN(Column), ?LLINE(Line) -> - new_location(fix_line(Line, L)); + new_location(Line); set_location({L, C}=Loc, Line) when ?ALINE(Line), ?LLINE(L), ?LCOLUMN(C) -> - new_location(fix_location(Loc, Line)); + new_location(Loc); set_location({L, C}=Loc, {Line, Column}) when ?ALINE(Line), ?ACOLUMN(Column), ?LLINE(L), ?LCOLUMN(C) -> - new_location(fix_location(Loc, Line)); + new_location(Loc); set_location(Location, Anno) -> - _ = set(location, Location, Anno), - {location, OldLocation} = lists:keyfind(location, 1, Anno), - NewLocation = - case {Location, OldLocation} of - {{_Line, _Column}=Loc, {L, _C}} -> - fix_location(Loc, L); - {Line, {L, _C}} -> - fix_line(Line, L); - {{_Line, _Column}=Loc, L} -> - fix_location(Loc, L); - {Line, L} -> - fix_line(Line, L) - end, - lists:keyreplace(location, 1, Anno, {location, NewLocation}). - -fix_location({Line, Column}, OldLine) -> - {fix_line(Line, OldLine), Column}. - -fix_line(Line, OldLine) when OldLine < 0, Line > 0 -> - -Line; -fix_line(Line, _OldLine) -> - Line. + set(location, Location, Anno). -spec set_record(Record, Anno) -> Anno when Record :: record(), @@ -383,7 +329,7 @@ set_anno(Item, Value, Anno) -> _ -> lists:keyreplace(Item, 1, Anno, {Item, Value}) end, - simplify(R) + reset_simplify(R) end. reset(Anno, Item) -> diff --git a/lib/stdlib/src/erl_lint.erl b/lib/stdlib/src/erl_lint.erl index c4cb5fdc80..a5f0e7dbd3 100644 --- a/lib/stdlib/src/erl_lint.erl +++ b/lib/stdlib/src/erl_lint.erl @@ -31,12 +31,8 @@ -export([is_guard_expr/1]). -export([bool_option/4,value_option/3,value_option/7]). --export([modify_line/2]). - -import(lists, [member/2,map/2,foldl/3,foldr/3,mapfoldl/3,all/2,reverse/1]). --deprecated([{modify_line, 2, next_major_release}]). - %% bool_option(OnOpt, OffOpt, Default, Options) -> boolean(). %% value_option(Flag, Default, Options) -> Value. %% value_option(Flag, Default, OnOpt, OnVal, OffOpt, OffVal, Options) -> @@ -79,7 +75,7 @@ value_option(Flag, Default, On, OnVal, Off, OffVal, Opts) -> %%-define(DEBUGF(X,Y), io:format(X, Y)). -define(DEBUGF(X,Y), void). --type line() :: erl_anno:line(). % a convenient alias +-type line() :: erl_anno:anno(). % a convenient alias -type fa() :: {atom(), arity()}. % function+arity -type ta() :: {atom(), arity()}. % type+arity @@ -238,6 +234,9 @@ format_error({removed, MFA, ReplacementMFA, Rel}) -> "use ~s", [format_mfa(MFA), Rel, format_mfa(ReplacementMFA)]); format_error({removed, MFA, String}) when is_list(String) -> io_lib:format("~s: ~s", [format_mfa(MFA), String]); +format_error({removed_type, MNA, ReplacementMNA, Rel}) -> + io_lib:format("the type ~s was removed in ~s; use ~s instead", + [format_mna(MNA), Rel, format_mna(ReplacementMNA)]); format_error({obsolete_guard, {F, A}}) -> io_lib:format("~p/~p obsolete", [F, A]); format_error({too_many_arguments,Arity}) -> @@ -413,6 +412,9 @@ format_mfa({M, F, A}) when is_integer(A) -> format_mf(M, F, ArityString) when is_atom(M), is_atom(F) -> atom_to_list(M) ++ ":" ++ atom_to_list(F) ++ "/" ++ ArityString. +format_mna({M, N, A}) when is_integer(A) -> + atom_to_list(M) ++ ":" ++ atom_to_list(N) ++ gen_type_paren(A). + format_where(L) when is_integer(L) -> io_lib:format("(line ~p)", [L]); format_where({L,C}) when is_integer(L), is_integer(C) -> @@ -3482,13 +3484,6 @@ vt_no_unused(Vt) -> [V || {_,{_,U,_L}}=V <- Vt, U =/= unused]. copy_expr(Expr, Anno) -> erl_parse:map_anno(fun(_A) -> Anno end, Expr). -%% modify_line(Form, Fun) -> Form -%% modify_line(Expression, Fun) -> Expression -%% Applies Fun to each line number occurrence. - -modify_line(T, F0) -> - erl_parse:map_anno(F0, T). - %% Check a record_info call. We have already checked that it is not %% shadowed by an import. @@ -3557,6 +3552,7 @@ deprecated_function(Line, M, F, As, St) -> St end. +-dialyzer({no_match, deprecated_type/5}). deprecated_type(L, M, N, As, St) -> NAs = length(As), case otp_internal:obsolete_type(M, N, NAs) of @@ -3567,6 +3563,8 @@ deprecated_type(L, M, N, As, St) -> false -> St end; + {removed, Replacement, Rel} -> + add_warning(L, {removed_type, {M,N,NAs}, Replacement, Rel}, St); no -> St end. diff --git a/lib/stdlib/src/erl_parse.yrl b/lib/stdlib/src/erl_parse.yrl index e82282421e..206b0c6e7b 100644 --- a/lib/stdlib/src/erl_parse.yrl +++ b/lib/stdlib/src/erl_parse.yrl @@ -525,11 +525,6 @@ Erlang code. -export([type_inop_prec/1,type_preop_prec/1]). -export([map_anno/2, fold_anno/3, mapfold_anno/3, new_anno/1, anno_to_term/1, anno_from_term/1]). --export([set_line/2,get_attribute/2,get_attributes/1]). - --deprecated([{set_line, 2, next_major_release}, - {get_attribute, 2, next_major_release}, - {get_attributes, 1, next_major_release}]). %% The following directive is needed for (significantly) faster compilation %% of the generated .erl file by the HiPE compiler. Please do not remove. @@ -1118,28 +1113,6 @@ type_preop_prec('-') -> {600,700}; type_preop_prec('bnot') -> {600,700}; type_preop_prec('#') -> {700,800}. -%%% [Experimental]. The parser just copies the attributes of the -%%% scanner tokens to the abstract format. This design decision has -%%% been hidden to some extent: use set_line() and get_attribute() to -%%% access the second element of (almost all) of the abstract format -%%% tuples. A typical use is to negate line numbers to prevent the -%%% compiler from emitting warnings and errors. The second element can -%%% (of course) be set to any value, but then these functions no -%%% longer apply. To get all present attributes as a property list -%%% get_attributes() should be used. - --compile({nowarn_deprecated_function,{erl_scan,set_attribute,3}}). -set_line(L, F) -> - erl_scan:set_attribute(line, L, F). - --compile({nowarn_deprecated_function,{erl_scan,attributes_info,2}}). -get_attribute(L, Name) -> - erl_scan:attributes_info(L, Name). - --compile({nowarn_deprecated_function,{erl_scan,attributes_info,1}}). -get_attributes(L) -> - erl_scan:attributes_info(L). - -spec map_anno(Fun, Abstr) -> NewAbstr when Fun :: fun((Anno) -> Anno), Anno :: erl_anno:anno(), diff --git a/lib/stdlib/src/erl_scan.erl b/lib/stdlib/src/erl_scan.erl index d2f53816b8..47223b129c 100644 --- a/lib/stdlib/src/erl_scan.erl +++ b/lib/stdlib/src/erl_scan.erl @@ -52,25 +52,15 @@ %%% External exports -export([string/1,string/2,string/3,tokens/3,tokens/4, - format_error/1,reserved_word/1, - token_info/1,token_info/2, - attributes_info/1,attributes_info/2,set_attribute/3]). + format_error/1,reserved_word/1]). -export([column/1,end_location/1,line/1,location/1,text/1, category/1,symbol/1]). --deprecated([{attributes_info, 1, next_major_release}, - {attributes_info, 2, next_major_release}, - {set_attribute, 3, next_major_release}, - {token_info, 1, next_major_release}, - {token_info, 2, next_major_release}]). - %%% Private -export([continuation_location/1]). -export_type([error_info/0, - line/0, - location/0, options/0, return_cont/0, token/0, @@ -85,29 +75,18 @@ -define(ALINE(L), is_integer(L)). -define(STRING(S), is_list(S)). -define(RESWORDFUN(F), is_function(F, 1)). --define(SETATTRFUN(F), is_function(F, 1)). -type category() :: atom(). --type column() :: pos_integer(). % Deprecated --type line() :: integer(). % Deprecated --type location() :: line() | {line(),column()}. % Deprecated -type resword_fun() :: fun((atom()) -> boolean()). -type option() :: 'return' | 'return_white_spaces' | 'return_comments' | 'text' | {'reserved_word_fun', resword_fun()}. -type options() :: option() | [option()]. -type symbol() :: atom() | float() | integer() | string(). --type info_line() :: integer() | term(). --type attributes_data() - :: [{'column', column()} | {'line', info_line()} | {'text', string()}] - | {line(), column()}. -%% The fact that {line(),column()} is a possible attributes() type -%% is hidden. --type attributes() :: line() | attributes_data(). --type token() :: {category(), attributes(), symbol()} - | {category(), attributes()}. +-type token() :: {category(), Anno :: erl_anno:anno(), symbol()} + | {category(), Anno :: erl_anno:anno()}. -type tokens() :: [token()]. -type error_description() :: term(). --type error_info() :: {location(), module(), error_description()}. +-type error_info() :: {erl_anno:location(), module(), error_description()}. %%% Local record. -record(erl_scan, @@ -136,8 +115,8 @@ format_error(Other) -> String :: string(), Return :: {'ok', Tokens :: tokens(), EndLocation} | {'error', ErrorInfo :: error_info(), ErrorLocation}, - EndLocation :: location(), - ErrorLocation :: location(). + EndLocation :: erl_anno:location(), + ErrorLocation :: erl_anno:location(). string(String) -> string(String, 1, []). @@ -145,9 +124,9 @@ string(String) -> String :: string(), Return :: {'ok', Tokens :: tokens(), EndLocation} | {'error', ErrorInfo :: error_info(), ErrorLocation}, - StartLocation :: location(), - EndLocation :: location(), - ErrorLocation :: location(). + StartLocation :: erl_anno:location(), + EndLocation :: erl_anno:location(), + ErrorLocation :: erl_anno:location(). string(String, StartLocation) -> string(String, StartLocation, []). @@ -156,9 +135,9 @@ string(String, StartLocation) -> Options :: options(), Return :: {'ok', Tokens :: tokens(), EndLocation} | {'error', ErrorInfo :: error_info(), ErrorLocation}, - StartLocation :: location(), - EndLocation :: location(), - ErrorLocation :: location(). + StartLocation :: erl_anno:location(), + EndLocation :: erl_anno:location(), + ErrorLocation :: erl_anno:location(). string(String, Line, Options) when ?STRING(String), ?ALINE(Line) -> string1(String, options(Options), Line, no_col, []); string(String, {Line,Column}, Options) when ?STRING(String), @@ -167,20 +146,23 @@ string(String, {Line,Column}, Options) when ?STRING(String), string1(String, options(Options), Line, Column, []). -type char_spec() :: string() | 'eof'. --type cont_fun() :: fun((char_spec(), #erl_scan{}, line(), column(), +-type cont_fun() :: fun((char_spec(), #erl_scan{}, + erl_anno:line(), erl_anno:column(), tokens(), any()) -> any()). -opaque return_cont() :: {erl_scan_continuation, - string(), column(), tokens(), line(), + string(), erl_anno:column(), tokens(), + erl_anno:line(), #erl_scan{}, any(), cont_fun()}. --type tokens_result() :: {'ok', Tokens :: tokens(), EndLocation :: location()} - | {'eof', EndLocation :: location()} +-type tokens_result() :: {'ok', Tokens :: tokens(), + EndLocation :: erl_anno:location()} + | {'eof', EndLocation :: erl_anno:location()} | {'error', ErrorInfo :: error_info(), - EndLocation :: location()}. + EndLocation :: erl_anno:location()}. -spec tokens(Continuation, CharSpec, StartLocation) -> Return when Continuation :: return_cont() | [], CharSpec :: char_spec(), - StartLocation :: location(), + StartLocation :: erl_anno:location(), Return :: {'done',Result :: tokens_result(),LeftOverChars :: char_spec()} | {'more', Continuation1 :: return_cont()}. tokens(Cont, CharSpec, StartLocation) -> @@ -189,7 +171,7 @@ tokens(Cont, CharSpec, StartLocation) -> -spec tokens(Continuation, CharSpec, StartLocation, Options) -> Return when Continuation :: return_cont() | [], CharSpec :: char_spec(), - StartLocation :: location(), + StartLocation :: erl_anno:location(), Options :: options(), Return :: {'done',Result :: tokens_result(),LeftOverChars :: char_spec()} | {'more', Continuation1 :: return_cont()}. @@ -257,155 +239,6 @@ symbol({_Category,_Anno,Symbol}) -> symbol(T) -> erlang:error(badarg, [T]). --type attribute_item() :: 'column' | 'length' | 'line' - | 'location' | 'text'. --type info_location() :: location() | term(). --type attribute_info() :: {'column', column()}| {'length', pos_integer()} - | {'line', info_line()} - | {'location', info_location()} - | {'text', string()}. --type token_item() :: 'category' | 'symbol' | attribute_item(). --type token_info() :: {'category', category()} | {'symbol', symbol()} - | attribute_info(). - --spec token_info(Token) -> TokenInfo when - Token :: token(), - TokenInfo :: [TokenInfoTuple :: token_info()]. -token_info(Token) -> - Items = [category,column,length,line,symbol,text], % undefined order - token_info(Token, Items). - --spec token_info(Token, TokenItem) -> TokenInfoTuple | 'undefined' when - Token :: token(), - TokenItem :: token_item(), - TokenInfoTuple :: token_info(); - (Token, TokenItems) -> TokenInfo when - Token :: token(), - TokenItems :: [TokenItem :: token_item()], - TokenInfo :: [TokenInfoTuple :: token_info()]. -token_info(_Token, []) -> - []; -token_info(Token, [Item|Items]) when is_atom(Item) -> - case token_info(Token, Item) of - undefined -> - token_info(Token, Items); - TokenInfo when is_tuple(TokenInfo) -> - [TokenInfo|token_info(Token, Items)] - end; -token_info({Category,_Attrs}, category=Item) -> - {Item,Category}; -token_info({Category,_Attrs,_Symbol}, category=Item) -> - {Item,Category}; -token_info({Category,_Attrs}, symbol=Item) -> - {Item,Category}; -token_info({_Category,_Attrs,Symbol}, symbol=Item) -> - {Item,Symbol}; -token_info({_Category,Attrs}, Item) -> - attributes_info(Attrs, Item); -token_info({_Category,Attrs,_Symbol}, Item) -> - attributes_info(Attrs, Item). - --spec attributes_info(Attributes) -> AttributesInfo when - Attributes :: attributes(), - AttributesInfo :: [AttributeInfoTuple :: attribute_info()]. -attributes_info(Attributes) -> - Items = [column,length,line,text], % undefined order - attributes_info(Attributes, Items). - --spec attributes_info - (Attributes, AttributeItem) -> AttributeInfoTuple | 'undefined' when - Attributes :: attributes(), - AttributeItem :: attribute_item(), - AttributeInfoTuple :: attribute_info(); - (Attributes, AttributeItems) -> AttributeInfo when - Attributes :: attributes(), - AttributeItems :: [AttributeItem :: attribute_item()], - AttributeInfo :: [AttributeInfoTuple :: attribute_info()]. -attributes_info(_Attrs, []) -> - []; -attributes_info(Attrs, [A|As]) when is_atom(A) -> - case attributes_info(Attrs, A) of - undefined -> - attributes_info(Attrs, As); - AttributeInfo when is_tuple(AttributeInfo) -> - [AttributeInfo|attributes_info(Attrs, As)] - end; -attributes_info({Line,Column}, column=Item) when ?ALINE(Line), - ?COLUMN(Column) -> - {Item,Column}; -attributes_info(Line, column) when ?ALINE(Line) -> - undefined; -attributes_info(Attrs, column=Item) -> - case attr_info(Attrs, Item) of - undefined -> - case erl_anno:column(Attrs) of - undefined -> - undefined; - Column -> - {Item,Column} - end; - T -> - T - end; -attributes_info(Attrs, length=Item) -> - case attributes_info(Attrs, text) of - undefined -> - undefined; - {text,Text} -> - {Item,length(Text)} - end; -attributes_info(Line, line=Item) when ?ALINE(Line) -> - {Item,Line}; -attributes_info({Line,Column}, line=Item) when ?ALINE(Line), - ?COLUMN(Column) -> - {Item,Line}; -attributes_info(Attrs, line=Item) -> - case attr_info(Attrs, Item) of - undefined -> - case attr_info(Attrs, location) of - {location,{Line,_Column}} -> - {Item,Line}; - {location,Line} -> - {Item,Line}; - undefined -> - undefined - end; - T -> - T - end; -attributes_info({Line,Column}=Location, location=Item) when ?ALINE(Line), - ?COLUMN(Column) -> - {Item,Location}; -attributes_info(Line, location=Item) when ?ALINE(Line) -> - {Item,Line}; -attributes_info(Attrs, location=Item) -> - {line,Line} = attributes_info(Attrs, line), - case attributes_info(Attrs, column) of - undefined -> - %% If set_attribute() has assigned a term such as {17,42} - %% to 'line', then Line will look like {Line,Column}. One - %% should not use 'location' but 'line' and 'column' in - %% such special cases. - {Item,Line}; - {column,Column} -> - {Item,{Line,Column}} - end; -attributes_info({Line,Column}, text) when ?ALINE(Line), ?COLUMN(Column) -> - undefined; -attributes_info(Line, text) when ?ALINE(Line) -> - undefined; -attributes_info(Attrs, text=Item) -> - attr_info(Attrs, Item); -attributes_info(T1, T2) -> - erlang:error(badarg, [T1,T2]). - --spec set_attribute(AttributeItem, Attributes, SetAttributeFun) -> Attributes when - AttributeItem :: 'line', - Attributes :: attributes(), - SetAttributeFun :: fun((info_line()) -> info_line()). -set_attribute(Tag, Attributes, Fun) when ?SETATTRFUN(Fun) -> - set_attr(Tag, Attributes, Fun). - %%% %%% Local functions %%% @@ -471,62 +304,6 @@ expand_opt(return, Os) -> expand_opt(O, Os) -> [O|Os]. -attr_info(Attrs, Item) -> - try lists:keyfind(Item, 1, Attrs) of - {_Item, _Value} = T -> - T; - false -> - undefined - catch - _:_ -> - erlang:error(badarg, [Attrs, Item]) - end. - --spec set_attr('line', attributes(), fun((line()) -> line())) -> attributes(). - -set_attr(line, Line, Fun) when ?ALINE(Line) -> - Ln = Fun(Line), - if - ?ALINE(Ln) -> - Ln; - true -> - [{line,Ln}] - end; -set_attr(line, {Line,Column}, Fun) when ?ALINE(Line), ?COLUMN(Column) -> - Ln = Fun(Line), - if - ?ALINE(Ln) -> - {Ln,Column}; - true -> - [{line,Ln},{column,Column}] - end; -set_attr(line=Tag, Attrs, Fun) when is_list(Attrs) -> - case lists:keyfind(Tag, 1, Attrs) of - {line,Line} -> - case lists:keyreplace(Tag, 1, Attrs, {line,Fun(Line)}) of - [{line,Ln}] when ?ALINE(Ln) -> - Ln; - As -> - As - end; - false -> - {location, Location} = lists:keyfind(location, 1, Attrs), - Ln = case Location of - {Line,Column} when ?ALINE(Line), ?COLUMN(Column) -> - {Fun(Line),Column}; - _ -> - Fun(Location) - end, - case lists:keyreplace(location, 1, Attrs, {location,Ln}) of - [{location,Ln}] when ?ALINE(Ln) -> - Ln; - As -> - As - end - end; -set_attr(T1, T2, T3) -> - erlang:error(badarg, [T1,T2,T3]). - tokens1(Cs, St, Line, Col, Toks, Fun, Any) when ?STRING(Cs); Cs =:= eof -> case Fun(Cs, St, Line, Col, Toks, Any) of {more,{Cs0,Ncol,Ntoks,Nline,Nany,Nfun}} -> diff --git a/lib/stdlib/src/otp_internal.erl b/lib/stdlib/src/otp_internal.erl index 2d77888512..90ef364d1a 100644 --- a/lib/stdlib/src/otp_internal.erl +++ b/lib/stdlib/src/otp_internal.erl @@ -586,49 +586,40 @@ obsolete_1(asn1rt, utf8_list_to_binary, 1) -> %% Added in OTP 18. obsolete_1(core_lib, get_anno, 1) -> - {deprecated,{cerl,get_ann,1}}; + {removed,{cerl,get_ann,1},"19"}; obsolete_1(core_lib, set_anno, 2) -> - {deprecated,{cerl,set_ann,2}}; + {removed,{cerl,set_ann,2},"19"}; obsolete_1(core_lib, is_literal, 1) -> - {deprecated,{cerl,is_literal,1}}; + {removed,{cerl,is_literal,1},"19"}; obsolete_1(core_lib, is_literal_list, 1) -> - {deprecated,"deprecated; use lists:all(fun cerl:is_literal/1, L)" + {removed,"removed; use lists:all(fun cerl:is_literal/1, L)" " instead"}; obsolete_1(core_lib, literal_value, 1) -> - {deprecated,{core_lib,concrete,1}}; + {removed,{core_lib,concrete,1},"19"}; obsolete_1(erl_scan, set_attribute, 3) -> - {deprecated, - "deprecated (will be removed in OTP 19); use erl_anno:set_line/2 instead"}; + {removed,{erl_anno,set_line,2},"19.0"}; obsolete_1(erl_scan, attributes_info, 1) -> - {deprecated, - "deprecated (will be removed in OTP 19); use " + {removed,"removed in 19.0; use " "erl_anno:{column,line,location,text}/1 instead"}; obsolete_1(erl_scan, attributes_info, 2) -> - {deprecated, - "deprecated (will be removed in OTP 19); use " + {removed,"removed in 19.0; use " "erl_anno:{column,line,location,text}/1 instead"}; obsolete_1(erl_scan, token_info, 1) -> - {deprecated, - "deprecated (will be removed in OTP 19); use " + {removed,"removed in 19.0; use " "erl_scan:{category,column,line,location,symbol,text}/1 instead"}; obsolete_1(erl_scan, token_info, 2) -> - {deprecated, - "deprecated (will be removed in OTP 19); use " + {removed,"removed in 19.0; use " "erl_scan:{category,column,line,location,symbol,text}/1 instead"}; obsolete_1(erl_parse, set_line, 2) -> - {deprecated, - "deprecated (will be removed in OTP 19); use erl_anno:set_line/2 instead"}; + {removed,{erl_anno,set_line,2},"19.0"}; obsolete_1(erl_parse, get_attributes, 1) -> - {deprecated, - "deprecated (will be removed in OTP 19); use " + {removed,"removed in 19.0; use " "erl_anno:{column,line,location,text}/1 instead"}; obsolete_1(erl_parse, get_attribute, 2) -> - {deprecated, - "deprecated (will be removed in OTP 19); use " + {removed,"removed in 19.0; use " "erl_anno:{column,line,location,text}/1 instead"}; obsolete_1(erl_lint, modify_line, 2) -> - {deprecated, - "deprecated (will be removed in OTP 19); use erl_parse:map_anno/2 instead"}; + {removed,{erl_parse,map_anno,2},"19.0"}; obsolete_1(ssl, negotiated_next_protocol, 1) -> {deprecated,{ssl,negotiated_protocol,1}}; @@ -698,26 +689,24 @@ is_snmp_agent_function(_, _) -> false. -spec obsolete_type(module(), atom(), arity()) -> 'no' | {tag(), string()} | {tag(), mfas(), release()}. +-dialyzer({no_match, obsolete_type/3}). obsolete_type(Module, Name, NumberOfVariables) -> case obsolete_type_1(Module, Name, NumberOfVariables) of -%% {deprecated=Tag,{_,_,_}=Replacement} -> -%% {Tag,Replacement,"in a future release"}; + {deprecated=Tag,{_,_,_}=Replacement} -> + {Tag,Replacement,"in a future release"}; {_,String}=Ret when is_list(String) -> Ret; -%% {_,_,_}=Ret -> -%% Ret; + {_,_,_}=Ret -> + Ret; no -> no end. obsolete_type_1(erl_scan,column,0) -> - {deprecated, - "deprecated (will be removed in OTP 19); use erl_anno:column() instead"}; + {removed,{erl_anno,column,0},"19.0"}; obsolete_type_1(erl_scan,line,0) -> - {deprecated, - "deprecated (will be removed in OTP 19); use erl_anno:line() instead"}; + {removed,{erl_anno,line,0},"19.0"}; obsolete_type_1(erl_scan,location,0) -> - {deprecated, - "deprecated (will be removed in OTP 19); use erl_anno:location() instead"}; + {removed,{erl_anno,location,0},"19.0"}; obsolete_type_1(_,_,_) -> no. diff --git a/lib/stdlib/src/slave.erl b/lib/stdlib/src/slave.erl index 24fc8ce204..4e629a5e56 100644 --- a/lib/stdlib/src/slave.erl +++ b/lib/stdlib/src/slave.erl @@ -289,10 +289,7 @@ register_unique_name(Number) -> %% no need to use rsh. mk_cmd(Host, Name, Args, Waiter, Prog0) -> - Prog = case os:type() of - {ose,_} -> mk_ose_prog(Prog0); - _ -> quote_progname(Prog0) - end, + Prog = quote_progname(Prog0), BasicCmd = lists:concat([Prog, " -detached -noinput -master ", node(), " ", long_or_short(), Name, "@", Host, @@ -312,24 +309,6 @@ mk_cmd(Host, Name, Args, Waiter, Prog0) -> end end. -%% On OSE we have to pass the beam arguments directory to the slave -%% process. To find out what arguments that should be passed on we -%% make an assumption. All arguments after the last "--" should be -%% skipped. So given these arguments: -%% -Muycs256 -A 1 -- -root /mst/ -progname beam.debug.smp -- -home /mst/ -- -kernel inetrc '"/mst/inetrc.conf"' -- -name test@localhost -%% we send -%% -Muycs256 -A 1 -- -root /mst/ -progname beam.debug.smp -- -home /mst/ -- -kernel inetrc '"/mst/inetrc.conf"' -- -%% to the slave with whatever other args that are added in mk_cmd. -mk_ose_prog(Prog) -> - SkipTail = fun("--",[]) -> - ["--"]; - (_,[]) -> - []; - (Arg,Args) -> - [Arg," "|Args] - end, - [Prog,tl(lists:foldr(SkipTail,[],erlang:system_info(emu_args)))]. - %% This is an attempt to distinguish between spaces in the program %% path and spaces that separate arguments. The program is quoted to %% allow spaces in the path. diff --git a/lib/stdlib/test/erl_anno_SUITE.erl b/lib/stdlib/test/erl_anno_SUITE.erl index 66b02151a0..0369455846 100644 --- a/lib/stdlib/test/erl_anno_SUITE.erl +++ b/lib/stdlib/test/erl_anno_SUITE.erl @@ -34,7 +34,7 @@ init_per_testcase/2, end_per_testcase/2]). -export([new/1, is_anno/1, generated/1, end_location/1, file/1, - line/1, location/1, record/1, text/1, bad/1, neg_line/1]). + line/1, location/1, record/1, text/1, bad/1]). -export([parse_abstract/1, mapfold_anno/1]). @@ -43,7 +43,7 @@ all() -> groups() -> [{anno, [], [new, is_anno, generated, end_location, file, - line, location, record, text, bad, neg_line]}, + line, location, record, text, bad]}, {parse, [], [parse_abstract, mapfold_anno]}]. suite() -> [{ct_hooks,[ts_install_cth]}]. @@ -229,74 +229,6 @@ bad(_Config) -> (catch erl_anno:record(bad)), % 1st arg not opaque ok. -neg_line(doc) -> - ["Test negative line numbers (OTP 18)"]; -neg_line(_Config) -> - neg_line1(false), - neg_line1(true), - ok. - -neg_line1(TextToo) -> - Minus8_0 = erl_anno:new(-8), - Plus8_0 = erl_anno:new(8), - Minus8C_0 = erl_anno:new({-8, 17}), - Plus8C_0 = erl_anno:new({8, 17}), - - [Minus8, Plus8, Minus8C, Plus8C] = - [case TextToo of - true -> - erl_anno:set_text("foo", A); - false -> - A - end || A <- [Minus8_0, Plus8_0, Minus8C_0, Plus8C_0]], - - tst(-3, erl_anno:set_location(3, Minus8)), - tst(-3, erl_anno:set_location(-3, Plus8)), - tst(-3, erl_anno:set_location(-3, Minus8)), - tst({-3,9}, erl_anno:set_location({3, 9}, Minus8)), - tst({-3,9}, erl_anno:set_location({-3, 9}, Plus8)), - tst({-3,9}, erl_anno:set_location({-3, 9}, Minus8)), - tst(-3, erl_anno:set_location(3, Minus8C)), - tst(-3, erl_anno:set_location(-3, Plus8C)), - tst(-3, erl_anno:set_location(-3, Minus8C)), - tst({-3,9}, erl_anno:set_location({3, 9}, Minus8C)), - tst({-3,9}, erl_anno:set_location({-3, 9}, Plus8C)), - tst({-3,9}, erl_anno:set_location({-3, 9}, Minus8C)), - - tst(-8, erl_anno:set_generated(true, Plus8)), - tst(-8, erl_anno:set_generated(true, Minus8)), - tst({-8,17}, erl_anno:set_generated(true, Plus8C)), - tst({-8,17}, erl_anno:set_generated(true, Minus8C)), - tst(8, erl_anno:set_generated(false, Plus8)), - tst(8, erl_anno:set_generated(false, Minus8)), - tst({8,17}, erl_anno:set_generated(false, Plus8C)), - tst({8,17}, erl_anno:set_generated(false, Minus8C)), - - tst(-3, erl_anno:set_line(3, Minus8)), - tst(-3, erl_anno:set_line(-3, Plus8)), - tst(-3, erl_anno:set_line(-3, Minus8)), - tst({-3,17}, erl_anno:set_line(3, Minus8C)), - tst({-3,17}, erl_anno:set_line(-3, Plus8C)), - tst({-3,17}, erl_anno:set_line(-3, Minus8C)), - ok. - -tst(Term, Anno) -> - ?format("Term: ~p\n", [Term]), - ?format("Anno: ~p\n", [Anno]), - case anno_to_term(Anno) of - Term -> - ok; - Else -> - case lists:keyfind(location, 1, Else) of - {location, Term} -> - ok; - _Else2 -> - ?format("Else2 ~p\n", [_Else2]), - io:format("expected ~p\n got ~p\n", [Term, Else]), - exit({Term, Else}) - end - end. - parse_abstract(doc) -> ["Test erl_parse:new_anno/1, erl_parse:anno_to_term/1" ", and erl_parse:anno_from_term/1"]; diff --git a/lib/stdlib/test/erl_lint_SUITE.erl b/lib/stdlib/test/erl_lint_SUITE.erl index 0424e2b967..6c07dc1ec6 100644 --- a/lib/stdlib/test/erl_lint_SUITE.erl +++ b/lib/stdlib/test/erl_lint_SUITE.erl @@ -65,7 +65,7 @@ too_many_arguments/1, basic_errors/1,bin_syntax_errors/1, predef/1, - maps/1,maps_type/1,otp_11851/1,otp_12195/1 + maps/1,maps_type/1,otp_11851/1 ]). % Default timetrap timeout (set in init_per_testcase). @@ -94,7 +94,7 @@ all() -> bif_clash, behaviour_basic, behaviour_multiple, otp_11861, otp_7550, otp_8051, format_warn, {group, on_load}, too_many_arguments, basic_errors, bin_syntax_errors, predef, - maps, maps_type, otp_11851, otp_12195]. + maps, maps_type, otp_11851]. groups() -> [{unused_vars_warn, [], @@ -3835,40 +3835,6 @@ otp_11851(Config) when is_list(Config) -> [] = run(Config, Ts), ok. -otp_12195(doc) -> - "OTP-12195: Check obsolete types (tailor made for OTP 18)."; -otp_12195(Config) when is_list(Config) -> - Ts = [{otp_12195_1, - <<"-export_type([r1/0]). - -type r1() :: erl_scan:line() - | erl_scan:column() - | erl_scan:location() - | erl_anno:line().">>, - [], - {warnings,[{2,erl_lint, - {deprecated_type,{erl_scan,line,0}, - "deprecated (will be removed in OTP 19); " - "use erl_anno:line() instead"}}, - {3,erl_lint, - {deprecated_type,{erl_scan,column,0}, - "deprecated (will be removed in OTP 19); use " - "erl_anno:column() instead"}}, - {4,erl_lint, - {deprecated_type,{erl_scan,location,0}, - "deprecated (will be removed in OTP 19); " - "use erl_anno:location() instead"}}]}}, - {otp_12195_2, - <<"-export_type([r1/0]). - -compile(nowarn_deprecated_type). - -type r1() :: erl_scan:line() - | erl_scan:column() - | erl_scan:location() - | erl_anno:line().">>, - [], - []}], - [] = run(Config, Ts), - ok. - run(Config, Tests) -> F = fun({N,P,Ws,E}, BadL) -> case catch run_test(Config, P, Ws) of diff --git a/lib/stdlib/test/erl_scan_SUITE.erl b/lib/stdlib/test/erl_scan_SUITE.erl index 12ea3d128c..db669aae99 100644 --- a/lib/stdlib/test/erl_scan_SUITE.erl +++ b/lib/stdlib/test/erl_scan_SUITE.erl @@ -191,8 +191,7 @@ otp_7810(Config) when is_list(Config) -> ?line ok = more_chars(), ?line ok = more_options(), - ?line ok = attributes_info(), - ?line ok = set_attribute(), + ?line ok = anno_info(), ok. @@ -269,7 +268,7 @@ punctuations() -> comments() -> ?line test("a %%\n b"), - {ok,[],1} = erl_scan_string("%"), + ?line {ok,[],1} = erl_scan_string("%"), ?line test("a %%\n b"), {ok,[{atom,{1,1},a},{atom,{2,2},b}],{2,3}} = erl_scan_string("a %%\n b", {1,1}), @@ -338,7 +337,7 @@ base_integers() -> erl_scan:string(Str) end || {BS,S} <- [{"3","3"},{"15","f"}, {"12","c"}] ], - {ok,[{integer,1,239},{'@',1}],1} = erl_scan_string("16#ef@"), + ?line {ok,[{integer,1,239},{'@',1}],1} = erl_scan_string("16#ef@"), {ok,[{integer,{1,1},239},{'@',{1,6}}],{1,7}} = erl_scan_string("16#ef@", {1,1}, []), {ok,[{integer,{1,1},14},{atom,{1,5},g@}],{1,7}} = @@ -387,20 +386,15 @@ dots() -> R2 = erl_scan_string(S, {1,1}, []) end || {S, R, R2} <- Dot], - ?line {ok,[{dot,_}=T1],{1,2}} = erl_scan:string(".", {1,1}, text), - ?line [{column,1},{length,1},{line,1},{text,"."}] = - erl_scan:token_info(T1, [column, length, line, text]), - ?line {ok,[{dot,_}=T2],{1,3}} = erl_scan:string(".%", {1,1}, text), - ?line [{column,1},{length,1},{line,1},{text,"."}] = - erl_scan:token_info(T2, [column, length, line, text]), - ?line {ok,[{dot,_}=T3],{1,6}} = + {ok,[{dot,_}=T1],{1,2}} = erl_scan:string(".", {1,1}, text), + [1, 1, "."] = token_info(T1), + {ok,[{dot,_}=T2],{1,3}} = erl_scan:string(".%", {1,1}, text), + [1, 1, "."] = token_info(T2), + {ok,[{dot,_}=T3],{1,6}} = erl_scan:string(".% öh", {1,1}, text), - ?line [{column,1},{length,1},{line,1},{text,"."}] = - erl_scan:token_info(T3, [column, length, line, text]), - ?line {error,{{1,2},erl_scan,char},{1,3}} = - erl_scan:string(".$", {1,1}), - ?line {error,{{1,2},erl_scan,char},{1,4}} = - erl_scan:string(".$\\", {1,1}), + [1, 1, "."] = token_info(T3), + {error,{{1,2},erl_scan,char},{1,3}} = erl_scan:string(".$", {1,1}), + {error,{{1,2},erl_scan,char},{1,4}} = erl_scan:string(".$\\", {1,1}), test_string(". ", [{dot,{1,1}}]), test_string(". ", [{dot,{1,1}}]), @@ -413,18 +407,18 @@ dots() -> test_string(".a", [{'.',{1,1}},{atom,{1,2},a}]), test_string("%. \n. ", [{dot,{2,1}}]), - ?line {more,C} = erl_scan:tokens([], "%. ",{1,1}, return), + {more,C} = erl_scan:tokens([], "%. ",{1,1}, return), {done,{ok,[{comment,{1,1},"%. "}, {white_space,{1,4},"\n"}, {dot,{2,1}}], {2,3}}, ""} = erl_scan_tokens(C, "\n. ", {1,1}, return), % any loc, any options - ?line [test_string(S, R) || - {S, R} <- [{".$\n", [{'.',{1,1}},{char,{1,2},$\n}]}, - {"$\\\n", [{char,{1,1},$\n}]}, - {"'\\\n'", [{atom,{1,1},'\n'}]}, - {"$\n", [{char,{1,1},$\n}]}] ], + [test_string(S, R) || + {S, R} <- [{".$\n", [{'.',{1,1}},{char,{1,2},$\n}]}, + {"$\\\n", [{char,{1,1},$\n}]}, + {"'\\\n'", [{atom,{1,1},'\n'}]}, + {"$\n", [{char,{1,1},$\n}]}] ], ok. chars() -> @@ -540,8 +534,8 @@ eof() -> %% A dot followed by eof is special: ?line {more, C} = erl_scan:tokens([], "a.", 1), - {done,{ok,[{atom,1,a},{dot,1}],1},eof} = erl_scan_tokens(C,eof,1), - {ok,[{atom,1,foo},{dot,1}],1} = erl_scan_string("foo."), + ?line {done,{ok,[{atom,1,a},{dot,1}],1},eof} = erl_scan_tokens(C,eof,1), + ?line {ok,[{atom,1,foo},{dot,1}],1} = erl_scan_string("foo."), %% With column. {more, CCol} = erl_scan:tokens([], "a.", {1,1}), @@ -655,145 +649,72 @@ options() -> ok. more_options() -> - ?line {ok,[{atom,A1,foo}],{19,20}} = + {ok,[{atom,_,foo}=T1],{19,20}} = erl_scan:string("foo", {19,17},[]), - ?line [{column,17},{line,19}] = erl_scan:attributes_info(A1), - ?line {done,{ok,[{atom,A2,foo},{dot,_}],{19,22}},[]} = + {19,17} = erl_scan:location(T1), + {done,{ok,[{atom,_,foo}=T2,{dot,_}],{19,22}},[]} = erl_scan:tokens([], "foo. ", {19,17}, [bad_opt]), % type error - ?line [{column,17},{line,19}] = erl_scan:attributes_info(A2), - ?line {ok,[{atom,A3,foo}],{19,20}} = + {19,17} = erl_scan:location(T2), + {ok,[{atom,_,foo}=T3],{19,20}} = erl_scan:string("foo", {19,17},[text]), - ?line [{column,17},{length,3},{line,19},{text,"foo"}] = - erl_scan:attributes_info(A3), + {19,17} = erl_scan:location(T3), + "foo" = erl_scan:text(T3), - ?line {ok,[{atom,A4,foo}],1} = erl_scan:string("foo", 1, [text]), - ?line [{length,3},{line,1},{text,"foo"}] = erl_scan:attributes_info(A4), + {ok,[{atom,_,foo}=T4],1} = erl_scan:string("foo", 1, [text]), + 1 = erl_scan:line(T4), + 1 = erl_scan:location(T4), + "foo" = erl_scan:text(T4), ok. token_info() -> - ?line {ok,[T1],_} = erl_scan:string("foo", {1,18}, [text]), + {ok,[T1],_} = erl_scan:string("foo", {1,18}, [text]), {'EXIT',{badarg,_}} = - (catch {foo, erl_scan:token_info(T1, foo)}), % type error - ?line {line,1} = erl_scan:token_info(T1, line), - ?line {column,18} = erl_scan:token_info(T1, column), - ?line {length,3} = erl_scan:token_info(T1, length), - ?line {text,"foo"} = erl_scan:token_info(T1, text), - ?line [{category,atom},{column,18},{length,3},{line,1}, - {symbol,foo},{text,"foo"}] = - erl_scan:token_info(T1), - ?line [{length,3},{column,18}] = - erl_scan:token_info(T1, [length, column]), - ?line [{location,{1,18}}] = - erl_scan:token_info(T1, [location]), - ?line {category,atom} = erl_scan:token_info(T1, category), - ?line [{symbol,foo}] = erl_scan:token_info(T1, [symbol]), - - ?line {ok,[T2],_} = erl_scan:string("foo", 1, []), - ?line {line,1} = erl_scan:token_info(T2, line), - ?line undefined = erl_scan:token_info(T2, column), - ?line undefined = erl_scan:token_info(T2, length), - ?line undefined = erl_scan:token_info(T2, text), - ?line {location,1} = erl_scan:token_info(T2, location), - ?line [{category,atom},{line,1},{symbol,foo}] = erl_scan:token_info(T2), - ?line [{line,1}] = erl_scan:token_info(T2, [length, line]), - - ?line {ok,[T3],_} = erl_scan:string("=", 1, []), - ?line [{line,1}] = erl_scan:token_info(T3, [column, line]), - ?line {category,'='} = erl_scan:token_info(T3, category), - ?line [{symbol,'='}] = erl_scan:token_info(T3, [symbol]), + (catch {foo, erl_scan:category(foo)}), % type error + {'EXIT',{badarg,_}} = + (catch {foo, erl_scan:symbol(foo)}), % type error + atom = erl_scan:category(T1), + foo = erl_scan:symbol(T1), + + {ok,[T2],_} = erl_scan:string("foo", 1, []), + 1 = erl_scan:line(T2), + undefined = erl_scan:column(T2), + undefined = erl_scan:text(T2), + 1 = erl_scan:location(T2), + + {ok,[T3],_} = erl_scan:string("=", 1, []), + '=' = erl_scan:category(T3), + '=' = erl_scan:symbol(T3), ok. -attributes_info() -> - ?line {'EXIT',_} = - (catch {foo,erl_scan:attributes_info(foo)}), % type error - [{line,18}] = erl_scan:attributes_info(erl_anno:new(18)), - {location,19} = - erl_scan:attributes_info(erl_anno:new(19), location), - ?line {ok,[{atom,A0,foo}],_} = erl_scan:string("foo", 19, [text]), - ?line {location,19} = erl_scan:attributes_info(A0, location), - - ?line {ok,[{atom,A3,foo}],_} = erl_scan:string("foo", {1,3}, [text]), - ?line {line,1} = erl_scan:attributes_info(A3, line), - ?line {column,3} = erl_scan:attributes_info(A3, column), - ?line {location,{1,3}} = erl_scan:attributes_info(A3, location), - ?line {text,"foo"} = erl_scan:attributes_info(A3, text), - - ?line {ok,[{atom,A4,foo}],_} = erl_scan:string("foo", 2, [text]), - ?line {line,2} = erl_scan:attributes_info(A4, line), - ?line undefined = erl_scan:attributes_info(A4, column), - ?line {location,2} = erl_scan:attributes_info(A4, location), - ?line {text,"foo"} = erl_scan:attributes_info(A4, text), - - ?line {ok,[{atom,A5,foo}],_} = erl_scan:string("foo", {1,3}, []), - ?line {line,1} = erl_scan:attributes_info(A5, line), - ?line {column,3} = erl_scan:attributes_info(A5, column), - ?line {location,{1,3}} = erl_scan:attributes_info(A5, location), - ?line undefined = erl_scan:attributes_info(A5, text), - - ?line undefined = erl_scan:attributes_info([], line), % type error +anno_info() -> + {'EXIT',_} = + (catch {foo,erl_scan:line(foo)}), % type error + {ok,[{atom,_,foo}=T0],_} = erl_scan:string("foo", 19, [text]), + 19 = erl_scan:location(T0), + 19 = erl_scan:end_location(T0), + + {ok,[{atom,_,foo}=T3],_} = erl_scan:string("foo", {1,3}, [text]), + 1 = erl_scan:line(T3), + 3 = erl_scan:column(T3), + {1,3} = erl_scan:location(T3), + {1,6} = erl_scan:end_location(T3), + "foo" = erl_scan:text(T3), + + {ok,[{atom,_,foo}=T4],_} = erl_scan:string("foo", 2, [text]), + 2 = erl_scan:line(T4), + undefined = erl_scan:column(T4), + 2 = erl_scan:location(T4), + "foo" = erl_scan:text(T4), + + {ok,[{atom,_,foo}=T5],_} = erl_scan:string("foo", {1,3}, []), + 1 = erl_scan:line(T5), + 3 = erl_scan:column(T5), + {1,3} = erl_scan:location(T5), + undefined = erl_scan:text(T5), ok. -set_attribute() -> - F = fun(Line) -> -Line end, - Anno2 = erl_anno:new(2), - A0 = erl_scan:set_attribute(line, Anno2, F), - {line, -2} = erl_scan:attributes_info(A0, line), - ?line {ok,[{atom,A1,foo}],_} = erl_scan:string("foo", {9,17}), - ?line A2 = erl_scan:set_attribute(line, A1, F), - ?line {line,-9} = erl_scan:attributes_info(A2, line), - ?line {location,{-9,17}} = erl_scan:attributes_info(A2, location), - ?line [{line,-9},{column,17}] = - erl_scan:attributes_info(A2, [line,column,text]), - - F2 = fun(Line) -> {17,Line} end, - ?line Attr1 = erl_scan:set_attribute(line, 2, F2), - ?line {line,{17,2}} = erl_scan:attributes_info(Attr1, line), - ?line undefined = erl_scan:attributes_info(Attr1, column), - ?line {location,{17,2}} = % a bit mixed up - erl_scan:attributes_info(Attr1, location), - - ?line A3 = erl_scan:set_attribute(line, A1, F2), - ?line {line,{17,9}} = erl_scan:attributes_info(A3, line), - ?line {location,{{17,9},17}} = erl_scan:attributes_info(A3, location), - ?line [{line,{17,9}},{column,17}] = - erl_scan:attributes_info(A3, [line,column,text]), - - ?line {ok,[{atom,A4,foo}],_} = erl_scan:string("foo", {9,17}, [text]), - ?line A5 = erl_scan:set_attribute(line, A4, F), - ?line {line,-9} = erl_scan:attributes_info(A5, line), - ?line {location,{-9,17}} = erl_scan:attributes_info(A5, location), - ?line [{line,-9},{column,17},{text,"foo"}] = - erl_scan:attributes_info(A5, [line,column,text]), - - ?line {ok,[{atom,A6,foo}],_} = erl_scan:string("foo", 11, [text]), - ?line A7 = erl_scan:set_attribute(line, A6, F2), - %% Incompatible with pre 18: - %% {line,{17,11}} = erl_scan:attributes_info(A7, line), - {line,17} = erl_scan:attributes_info(A7, line), - ?line {location,{17,11}} = % mixed up - erl_scan:attributes_info(A7, location), - %% Incompatible with pre 18: - %% [{line,{17,11}},{text,"foo"}] = - %% erl_scan:attributes_info(A7, [line,column,text]), - [{line,17},{column,11},{text,"foo"}] = - erl_scan:attributes_info(A7, [line,column,text]), - - ?line {'EXIT',_} = - (catch {foo, erl_scan:set_attribute(line, [], F2)}), % type error - ?line {'EXIT',{badarg,_}} = - (catch {foo, erl_scan:set_attribute(column, [], F2)}), % type error - - Attr10 = erl_anno:new(8), - Attr20 = erl_scan:set_attribute(line, Attr10, - fun(L) -> {nos,'X',L} end), - %% OTP-9412 - Attr30 = erl_scan:set_attribute(line, Attr20, - fun({nos,_V,VL}) -> VL end), - 8 = erl_anno:to_term(Attr30), - ok. - column_errors() -> ?line {error,{{1,1},erl_scan,{string,$',""}},{1,3}} = % $' erl_scan:string("'\\",{1,1}), @@ -892,14 +813,13 @@ unicode() -> erl_scan_string(Qs, 1), {ok,[Q2],{1,9}} = erl_scan:string("$\\x{aaa}", {1,1}, [text]), - [{category,char},{column,1},{length,8}, - {line,1},{symbol,16#aaa},{text,Qs}] = - erl_scan:token_info(Q2), + [{category,char},{column,1},{line,1},{symbol,16#aaa},{text,Qs}] = + token_info_long(Q2), U1 = "\"\\x{aaa}\"", - {ok,[{string,A1,[2730]}],{1,10}} = erl_scan:string(U1, {1,1}, [text]), - [{line,1},{column,1},{text,"\"\\x{aaa}\""}] = - erl_scan:attributes_info(A1, [line, column, text]), + {ok,[{string,_,[2730]}=T1],{1,10}} = erl_scan:string(U1, {1,1}, [text]), + {1,1} = erl_scan:location(T1), + "\"\\x{aaa}\"" = erl_scan:text(T1), {ok,[{string,1,[2730]}],1} = erl_scan_string(U1, 1), U2 = "\"\\x41\\x{fff}\\x42\"", @@ -1012,16 +932,13 @@ otp_10302(Config) when is_list(Config) -> Qs = "$\\x{aaa}", {ok,[{char,1,2730}],1} = erl_scan_string(Qs, 1), {ok,[Q2],{1,9}} = erl_scan:string(Qs,{1,1},[text]), - [{category,char},{column,1},{length,8}, - {line,1},{symbol,16#aaa},{text,Qs}] = - erl_scan:token_info(Q2), - - Tags = [category, column, length, line, symbol, text], + [{category,char},{column,1},{line,1},{symbol,16#aaa},{text,Qs}] = + token_info_long(Q2), U1 = "\"\\x{aaa}\"", {ok,[T1],{1,10}} = erl_scan:string(U1, {1,1}, [text]), - [{category,string},{column,1},{length,9},{line,1}, - {symbol,[16#aaa]},{text,U1}] = erl_scan:token_info(T1, Tags), + [{category,string},{column,1},{line,1},{symbol,[16#aaa]},{text,U1}] = + token_info_long(T1), U2 = "\"\\x41\\x{fff}\\x42\"", {ok,[{string,1,[65,4095,66]}],1} = erl_scan_string(U2, 1), @@ -1353,9 +1270,7 @@ test_wsc([], []) -> ok; test_wsc([Token|Tokens], [Token2|Tokens2]) -> [Text, Text2] = [Text || - {text, Text} <- - [erl_scan:token_info(T, text) || - T <- [Token, Token2]]], + Text <- [erl_scan:text(T) || T <- [Token, Token2]]], Sz = erts_debug:size(Text), Sz2 = erts_debug:size({Text, Text2}), IsCompacted = Sz2 < 2*Sz+erts_debug:size({a,a}), @@ -1394,7 +1309,7 @@ all_same(L, Char) -> newlines_first([]) -> ok; newlines_first([Token|Tokens]) -> - {text,Text} = erl_scan:token_info(Token, text), + Text = erl_scan:text(Token), Nnls = length([C || C <- Text, C =:= $\n]), OK = case Text of [$\n|_] -> @@ -1414,7 +1329,7 @@ select_tokens(Tokens, Tags) -> lists:filter(fun(T) -> lists:member(element(1, T), Tags) end, Tokens). simplify([Token|Tokens]) -> - {line,Line} = erl_scan:token_info(Token, line), + Line = erl_scan:line(Token), [setelement(2, Token, erl_anno:new(Line)) | simplify(Tokens)]; simplify([]) -> []. @@ -1423,17 +1338,31 @@ get_text(Tokens) -> lists:flatten( [T || Token <- Tokens, - ({text,T} = erl_scan:token_info(Token, text)) =/= []]). + (T = erl_scan:text(Token)) =/= []]). test_decorated_tokens(String, Tokens) -> ToksAttrs = token_attrs(Tokens), test_strings(ToksAttrs, String, 1, 1). token_attrs(Tokens) -> - [{L,C,Len,T} || + [{L,C,length(T),T} || Token <- Tokens, - ([{line,L},{column,C},{length,Len},{text,T}] = - erl_scan:token_info(Token, [line,column,length,text])) =/= []]. + ([C,L,T] = token_info(Token)) =/= []]. + +token_info(T) -> + Column = erl_scan:column(T), + Line = erl_scan:line(T), + Text = erl_scan:text(T), + [Column, Line, Text]. + +token_info_long(T) -> + Column = erl_scan:column(T), + Line = erl_scan:line(T), + Text = erl_scan:text(T), + Category = erl_scan:category(T), + Symbol = erl_scan:symbol(T), + [{category,Category},{column,Column},{line,Line}, + {symbol,Symbol},{text,Text}]. test_strings([], _S, Line, Column) -> {Line,Column}; @@ -1514,8 +1443,7 @@ consistent_attributes([Ts | TsL]) -> L = [T || T <- Ts, is_integer(element(2, T))], case L of [] -> - TagsL = [[Tag || {Tag,_} <- - erl_scan:attributes_info(element(2, T))] || + TagsL = [[Tag || {Tag,_} <- defined(token_info_long(T))] || T <- Ts], case lists:usort(TagsL) of [_] -> @@ -1531,6 +1459,9 @@ consistent_attributes([Ts | TsL]) -> Ts end. +defined(L) -> + [{T,V} || {T,V} <- L, V =/= undefined]. + family_list(L) -> sofs:to_external(family(L)). diff --git a/lib/stdlib/test/ets_SUITE.erl b/lib/stdlib/test/ets_SUITE.erl index ae431d66d9..1b80f555d7 100644 --- a/lib/stdlib/test/ets_SUITE.erl +++ b/lib/stdlib/test/ets_SUITE.erl @@ -731,10 +731,6 @@ chk_normal_tab_struct_size() -> % ?line ok % end. --define(DB_TREE_STACK_NEED,50). % The static stack for a tree, in halfword pointers are two internal words - % so the stack gets twice as big --define(DB_HASH_SIZEOF_EXTSEG,260). % The segment size in words, in halfword this will be twice as large. - adjust_xmem([T1,T2,T3,T4], {A0,B0,C0,D0} = _Mem0) -> %% Adjust for 64-bit, smp, and os: %% Table struct size may differ. @@ -748,19 +744,7 @@ adjust_xmem([T1,T2,T3,T4], {A0,B0,C0,D0} = _Mem0) -> % end, TabDiff = ?TAB_STRUCT_SZ, - Mem1 = {A0+TabDiff, B0+TabDiff, C0+TabDiff, D0+TabDiff}, - - case {erlang:system_info({wordsize,internal}),erlang:system_info({wordsize,external})} of - %% Halfword, corrections for regular pointers occupying two internal words. - {4,8} -> - {A1,B1,C1,D1} = Mem1, - {A1+4*ets:info(T1, size)+?DB_TREE_STACK_NEED, - B1+3*ets:info(T2, size)+?DB_HASH_SIZEOF_EXTSEG, - C1+3*ets:info(T3, size)+?DB_HASH_SIZEOF_EXTSEG, - D1+3*ets:info(T4, size)+?DB_HASH_SIZEOF_EXTSEG}; - _ -> - Mem1 - end. + {A0+TabDiff, B0+TabDiff, C0+TabDiff, D0+TabDiff}. t_whitebox(doc) -> ["Diverse whitebox testes"]; diff --git a/lib/stdlib/test/filename_SUITE.erl b/lib/stdlib/test/filename_SUITE.erl index fd47da8150..4372e77df9 100644 --- a/lib/stdlib/test/filename_SUITE.erl +++ b/lib/stdlib/test/filename_SUITE.erl @@ -97,20 +97,11 @@ absname(Config) when is_list(Config) -> ?line file:set_cwd(Cwd), ok; - Type -> - case Type of - {unix, _} -> - ?line ok = file:set_cwd("/usr"), - ?line "/usr/foo" = filename:absname(foo), - ?line "/usr/foo" = filename:absname("foo"), - ?line "/usr/../ebin" = filename:absname("../ebin"); - {ose, _} -> - ?line ok = file:set_cwd("/romfs"), - ?line "/romfs/foo" = filename:absname(foo), - ?line "/romfs/foo" = filename:absname("foo"), - ?line "/romfs/../ebin" = filename:absname("../ebin") - end, - + {unix, _} -> + ?line ok = file:set_cwd("/usr"), + ?line "/usr/foo" = filename:absname(foo), + ?line "/usr/foo" = filename:absname("foo"), + ?line "/usr/../ebin" = filename:absname("../ebin"), ?line file:set_cwd("/"), ?line "/foo" = filename:absname(foo), ?line "/foo" = filename:absname("foo"), @@ -494,18 +485,10 @@ absname_bin(Config) when is_list(Config) -> ?line file:set_cwd(Cwd), ok; - Type -> - case Type of - {unix,_} -> - ?line ok = file:set_cwd(<<"/usr">>), - ?line <<"/usr/foo">> = filename:absname(<<"foo">>), - ?line <<"/usr/../ebin">> = filename:absname(<<"../ebin">>); - {ose,_} -> - ?line ok = file:set_cwd(<<"/romfs">>), - ?line <<"/romfs/foo">> = filename:absname(<<"foo">>), - ?line <<"/romfs/../ebin">> = filename:absname(<<"../ebin">>) - end, - + {unix, _} -> + ?line ok = file:set_cwd(<<"/usr">>), + ?line <<"/usr/foo">> = filename:absname(<<"foo">>), + ?line <<"/usr/../ebin">> = filename:absname(<<"../ebin">>), ?line file:set_cwd(<<"/">>), ?line <<"/foo">> = filename:absname(<<"foo">>), ?line <<"/../ebin">> = filename:absname(<<"../ebin">>), diff --git a/lib/syntax_tools/src/erl_syntax.erl b/lib/syntax_tools/src/erl_syntax.erl index 3f2a3e05dd..97b5797b06 100644 --- a/lib/syntax_tools/src/erl_syntax.erl +++ b/lib/syntax_tools/src/erl_syntax.erl @@ -355,7 +355,7 @@ %% where `Pos' `Ann' and `Comments' are the corresponding values of a %% `tree' or `wrapper' record. --record(attr, {pos = 0 :: term(), +-record(attr, {pos = erl_anno:new(0) :: term(), ann = [] :: [term()], com = none :: 'none' | #com{}}). -type syntaxTreeAttributes() :: #attr{}. diff --git a/lib/syntax_tools/src/merl.erl b/lib/syntax_tools/src/merl.erl index 690306c17b..163ce48bbc 100644 --- a/lib/syntax_tools/src/merl.erl +++ b/lib/syntax_tools/src/merl.erl @@ -514,15 +514,17 @@ parse_forms([]) -> parse_2(Ts) -> %% one or more comma-separated expressions? %% (recall that Ts has no dot tokens if we get to this stage) - case erl_parse:parse_exprs(Ts ++ [{dot,0}]) of + A = a0(), + case erl_parse:parse_exprs(Ts ++ [{dot,A}]) of {ok, Exprs} -> Exprs; {error, E} -> - parse_3(Ts ++ [{'end',0}, {dot,0}], [E]) + parse_3(Ts ++ [{'end',A}, {dot,A}], [E]) end. parse_3(Ts, Es) -> %% try-clause or clauses? - case erl_parse:parse_exprs([{'try',0}, {atom,0,true}, {'catch',0} | Ts]) of + A = a0(), + case erl_parse:parse_exprs([{'try',A}, {atom,A,true}, {'catch',A} | Ts]) of {ok, [{'try',_,_,_,_,_}=X]} -> %% get the right kind of qualifiers in the clause patterns erl_syntax:try_expr_handlers(X); @@ -533,7 +535,8 @@ parse_3(Ts, Es) -> parse_4(Ts, Es) -> %% fun-clause or clauses? (`(a)' is also a pattern, but `(a,b)' isn't, %% so fun-clauses must be tried before normal case-clauses - case erl_parse:parse_exprs([{'fun',0} | Ts]) of + A = a0(), + case erl_parse:parse_exprs([{'fun',A} | Ts]) of {ok, [{'fun',_,{clauses,Cs}}]} -> Cs; {error, E} -> parse_5(Ts, [E|Es]) @@ -541,7 +544,8 @@ parse_4(Ts, Es) -> parse_5(Ts, Es) -> %% case-clause or clauses? - case erl_parse:parse_exprs([{'case',0}, {atom,0,true}, {'of',0} | Ts]) of + A = a0(), + case erl_parse:parse_exprs([{'case',A}, {atom,A,true}, {'of',A} | Ts]) of {ok, [{'case',_,_,Cs}]} -> Cs; {error, E} -> %% select the best error to report @@ -1210,7 +1214,7 @@ merge_comments(StartLine, Cs, [], Acc) -> merge_comments(StartLine, [], [], [erl_syntax:set_pos( erl_syntax:comment(Indent, Text), - StartLine + Line - 1) + anno(StartLine + Line - 1)) || {Line, _, Indent, Text} <- Cs] ++ Acc); merge_comments(StartLine, [C|Cs], [T|Ts], Acc) -> {Line, _Col, Indent, Text} = C, @@ -1228,3 +1232,9 @@ merge_comments(StartLine, [C|Cs], [T|Ts], Acc) -> [erl_syntax:comment(Indent, Text)], T), merge_comments(StartLine, Cs, [Tc|Ts], Acc) end. + +a0() -> + anno(0). + +anno(Location) -> + erl_anno:new(Location). diff --git a/lib/syntax_tools/src/merl_transform.erl b/lib/syntax_tools/src/merl_transform.erl index 66b06c8137..fe58b6a122 100644 --- a/lib/syntax_tools/src/merl_transform.erl +++ b/lib/syntax_tools/src/merl_transform.erl @@ -68,8 +68,7 @@ case_guard([{expr,_}, {text,Text}]) -> erl_syntax:is_literal(Text). case_body([{expr,Expr}, {text,_Text}], T) -> - pre_expand_case(Expr, erl_syntax:case_expr_clauses(T), - erl_syntax:get_pos(T)). + pre_expand_case(Expr, erl_syntax:case_expr_clauses(T), get_location(T)). post(T) -> merl:switch( @@ -79,7 +78,7 @@ post(T) -> lists:all(fun erl_syntax:is_literal/1, [F|As]) end, fun ([{args, As}, {function, F}]) -> - Line = erl_syntax:get_pos(F), + Line = get_location(F), [F1|As1] = lists:map(fun erl_syntax:concrete/1, [F|As]), eval_call(Line, F1, As1, T) end}, @@ -118,7 +117,7 @@ expand_qquote(_As, T, _StartPos) -> expand_template(F, [Pattern | Args], T) -> case erl_syntax:is_literal(Pattern) of true -> - Line = erl_syntax:get_pos(Pattern), + Line = get_location(Pattern), As = [erl_syntax:concrete(Pattern)], merl:qquote(Line, "merl:_@function(_@pattern, _@args)", [{function, F}, @@ -260,3 +259,12 @@ is_erlang_var([C|_]) when C >= $A, C =< $Z ; C >= $À, C =< $Þ, C /= $× -> true; is_erlang_var(_) -> false. + +get_location(T) -> + Pos = erl_syntax:get_pos(T), + case erl_anno:is_anno(Pos) of + true -> + erl_anno:location(Pos); + false -> + Pos + end. diff --git a/lib/test_server/src/erl2html2.erl b/lib/test_server/src/erl2html2.erl index 2c63103264..e281c9de1b 100644 --- a/lib/test_server/src/erl2html2.erl +++ b/lib/test_server/src/erl2html2.erl @@ -170,23 +170,32 @@ get_line(Anno) -> %%%----------------------------------------------------------------- %%% Find the line number of the last expression in the function find_clause_lines([{clause,CL,_Params,_Op,Exprs}], CLs) -> % last clause - try tuple_to_list(lists:last(Exprs)) of - [_Type,ExprLine | _] when is_integer(ExprLine) -> - {lists:reverse([{clause,get_line(CL)}|CLs]), get_line(ExprLine)}; - [tree,_ | Exprs1] -> + case classify_exprs(Exprs) of + {anno, Anno} -> + {lists:reverse([{clause,get_line(CL)}|CLs]), get_line(Anno)}; + {tree, Exprs1} -> find_clause_lines([{clause,CL,undefined,undefined,Exprs1}], CLs); - [macro,{_var,ExprLine,_MACRO} | _] when is_integer(ExprLine) -> - {lists:reverse([{clause,get_line(CL)}|CLs]), get_line(ExprLine)}; - _ -> - {lists:reverse([{clause,get_line(CL)}|CLs]), get_line(CL)} - catch - _:_ -> + unknown -> {lists:reverse([{clause,get_line(CL)}|CLs]), get_line(CL)} end; - find_clause_lines([{clause,CL,_Params,_Op,_Exprs} | Cs], CLs) -> find_clause_lines(Cs, [{clause,get_line(CL)}|CLs]). +classify_exprs(Exprs) -> + case tuple_to_list(lists:last(Exprs)) of + [macro,{_var,Anno,_MACRO} | _] -> + {anno, Anno}; + [T,ExprAnno | Exprs1] -> + case erl_anno:is_anno(ExprAnno) of + true -> + {anno, ExprAnno}; + false when T =:= tree -> + {tree, Exprs1}; + false -> + unknown + end + end. + %%%----------------------------------------------------------------- %%% Add a link target for each line and one for each function definition. build_html(SFd,DFd,Encoding,FuncsAndCs) -> diff --git a/lib/tools/c_src/Makefile.in b/lib/tools/c_src/Makefile.in index 66bba229f6..e8bce149b1 100644 --- a/lib/tools/c_src/Makefile.in +++ b/lib/tools/c_src/Makefile.in @@ -97,11 +97,8 @@ DRIVERS= ifneq ($(strip $(ETHR_LIB_NAME)),) # Need ethread package for emem -ifneq ($(findstring ose,$(TARGET)),ose) -# Do not build on OSE PROGS += $(BIN_DIR)/emem$(TYPEMARKER)@EXEEXT@ endif -endif EMEM_OBJ_DIR=$(OBJ_DIR)/emem CREATE_DIRS += $(EMEM_OBJ_DIR) @@ -152,12 +149,7 @@ ERTS_LIB = $(ERL_TOP/erts/lib_src/obj/$(TARGET)/$(TYPE)/MADE _create_dirs := $(shell mkdir -p $(CREATE_DIRS)) -ifneq ($(findstring ose,$(TARGET)),ose) all: $(PROGS) $(DRIVERS) -else -# Do not build dynamic files on OSE -all: -endif $(ERTS_LIB): $(make_verbose)cd $(ERL_TOP)/erts/lib_src && $(MAKE) $(TYPE) |