diff options
Diffstat (limited to 'lib')
51 files changed, 81 insertions, 2884 deletions
diff --git a/lib/Makefile b/lib/Makefile index 34c2fe9a9e..64143a39e0 100644 --- a/lib/Makefile +++ b/lib/Makefile @@ -36,7 +36,7 @@ ALL_ERLANG_APPLICATIONS = xmerl edoc erl_docgen snmp otp_mibs erl_interface \ public_key ssl observer odbc diameter \ cosTransactions cosEvent cosTime cosNotification \ cosProperty cosFileTransfer cosEventDomain et megaco webtool \ - eunit ssh typer percept eldap dialyzer hipe ose + eunit ssh typer percept eldap dialyzer hipe ifdef BUILD_ALL ERLANG_APPLICATIONS += $(ALL_ERLANG_APPLICATIONS) diff --git a/lib/asn1/c_src/Makefile b/lib/asn1/c_src/Makefile index 2b72e1a214..e0d4f09a70 100644 --- a/lib/asn1/c_src/Makefile +++ b/lib/asn1/c_src/Makefile @@ -97,12 +97,7 @@ endif _create_dirs := $(shell mkdir -p $(OBJDIR) $(LIBDIR)) -ifneq ($(findstring ose,$(TARGET)),ose) opt: $(NIF_SHARED_OBJ_FILE) -else -# Do not build dynamic files on OSE -opt: -endif debug: opt @@ -140,9 +135,7 @@ include $(ERL_TOP)/make/otp_release_targets.mk release_spec: opt $(INSTALL_DIR) "$(RELSYSDIR)/priv/lib" -ifneq ($(findstring ose,$(TARGET)),ose) $(INSTALL_PROGRAM) $(NIF_SHARED_OBJ_FILE) "$(RELSYSDIR)/priv/lib" -endif $(INSTALL_DIR) "$(RELSYSDIR)/c_src" $(INSTALL_DATA) *.c "$(RELSYSDIR)/c_src" diff --git a/lib/crypto/Makefile b/lib/crypto/Makefile index 24db75bf91..fbf108c410 100644 --- a/lib/crypto/Makefile +++ b/lib/crypto/Makefile @@ -24,11 +24,7 @@ include $(ERL_TOP)/make/$(TARGET)/otp.mk # Macros # -ifneq ($(findstring ose,$(TARGET)),ose) SUB_DIRECTORIES = src c_src doc/src -else -SUB_DIRECTORIES = src doc/src -endif static_lib: SUB_DIRECTORIES = c_src include vsn.mk diff --git a/lib/crypto/c_src/Makefile.in b/lib/crypto/c_src/Makefile.in index e66c0ca916..e7f750b60a 100644 --- a/lib/crypto/c_src/Makefile.in +++ b/lib/crypto/c_src/Makefile.in @@ -127,12 +127,7 @@ ALL_STATIC_CFLAGS = $(DED_STATIC_CFLAGS) $(INCLUDES) _create_dirs := $(shell mkdir -p $(OBJDIR) $(LIBDIR)) -ifneq ($(findstring ose,$(TARGET)),ose) debug opt valgrind: $(NIF_LIB) $(CALLBACK_LIB) -else -# Do not build dynamic files on OSE -debug opt valgrind: -endif static_lib: $(NIF_ARCHIVE) @@ -203,14 +198,12 @@ release_spec: opt $(INSTALL_DIR) "$(RELSYSDIR)/priv/obj" $(INSTALL_DIR) "$(RELSYSDIR)/priv/lib" $(INSTALL_DATA) $(NIF_MAKEFILE) "$(RELSYSDIR)/priv/obj" -ifneq ($(findstring ose,$(TARGET)),ose) $(INSTALL_PROGRAM) $(CRYPTO_OBJS) "$(RELSYSDIR)/priv/obj" $(INSTALL_PROGRAM) $(NIF_LIB) "$(RELSYSDIR)/priv/lib" ifeq ($(DYNAMIC_CRYPTO_LIB),yes) $(INSTALL_PROGRAM) $(CALLBACK_OBJS) "$(RELSYSDIR)/priv/obj" $(INSTALL_PROGRAM) $(CALLBACK_LIB) "$(RELSYSDIR)/priv/lib" endif -endif release_docs_spec: diff --git a/lib/crypto/c_src/crypto.c b/lib/crypto/c_src/crypto.c index 9de8dc74c2..e9cac30c9c 100644 --- a/lib/crypto/c_src/crypto.c +++ b/lib/crypto/c_src/crypto.c @@ -507,47 +507,6 @@ static void hmac_context_dtor(ErlNifEnv* env, struct hmac_context*); #define PRINTF_ERR1(FMT,A1) #define PRINTF_ERR2(FMT,A1,A2) -#ifdef __OSE__ - -/* For crypto on OSE we have to initialize the crypto library on each - process that uses it. So since we do not know which scheduler is going - to execute the nif we have to check before each nif call that we have - initialized crypto in that process. */ - -#include "ose.h" -#include "openssl/osessl.h" - -static ErlNifTSDKey crypto_init_key; -static int check_ose_crypto(void); -static int init_ose_crypto(void); - -static int check_ose_crypto() { - int key = (int)enif_tsd_get(crypto_init_key); - if (!key) { - if (!CRYPTO_OSE5_init()) { - PRINTF_ERR0("CRYPTO: Call to CRYPTO_OSE5_init failed"); - return 0; - } - enif_tsd_set(crypto_init_key,1); - } - return 1; -} - -static int init_ose_crypto() { - /* Crypto nif upgrade does not work on OSE so no need to - destroy this key */ - enif_tsd_key_create("crypto_init_key", &crypto_init_key); - return check_ose_crypto(); -} - -#define INIT_OSE_CRYPTO() init_ose_crypto() -#define CHECK_OSE_CRYPTO() check_ose_crypto() -#else -#define INIT_OSE_CRYPTO() 1 -#define CHECK_OSE_CRYPTO() -#endif - - static int verify_lib_version(void) { const unsigned long libv = SSLeay(); @@ -609,9 +568,6 @@ static int init(ErlNifEnv* env, ERL_NIF_TERM load_info) ErlNifBinary lib_bin; char lib_buf[1000]; - if (!INIT_OSE_CRYPTO()) - return 0; - if (!verify_lib_version()) return 0; @@ -853,7 +809,6 @@ static ERL_NIF_TERM md5(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) {/* (Data) */ ErlNifBinary ibin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &ibin)) { return enif_make_badarg(env); } @@ -865,7 +820,6 @@ static ERL_NIF_TERM md5(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) static ERL_NIF_TERM md5_init(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) {/* () */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); MD5_Init((MD5_CTX *) enif_make_new_binary(env, MD5_CTX_LEN, &ret)); return ret; } @@ -874,7 +828,6 @@ static ERL_NIF_TERM md5_update(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv MD5_CTX* new_ctx; ErlNifBinary ctx_bin, data_bin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != MD5_CTX_LEN || !enif_inspect_iolist_as_binary(env, argv[1], &data_bin)) { @@ -891,7 +844,6 @@ static ERL_NIF_TERM md5_final(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[ ErlNifBinary ctx_bin; MD5_CTX ctx_clone; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != MD5_CTX_LEN) { return enif_make_badarg(env); } @@ -904,7 +856,6 @@ static ERL_NIF_TERM ripemd160(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[ {/* (Data) */ ErlNifBinary ibin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &ibin)) { return enif_make_badarg(env); } @@ -916,7 +867,6 @@ static ERL_NIF_TERM ripemd160(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[ static ERL_NIF_TERM ripemd160_init(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) {/* () */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); RIPEMD160_Init((RIPEMD160_CTX *) enif_make_new_binary(env, RIPEMD160_CTX_LEN, &ret)); return ret; } @@ -925,7 +875,6 @@ static ERL_NIF_TERM ripemd160_update(ErlNifEnv* env, int argc, const ERL_NIF_TER RIPEMD160_CTX* new_ctx; ErlNifBinary ctx_bin, data_bin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != RIPEMD160_CTX_LEN || !enif_inspect_iolist_as_binary(env, argv[1], &data_bin)) { @@ -942,7 +891,6 @@ static ERL_NIF_TERM ripemd160_final(ErlNifEnv* env, int argc, const ERL_NIF_TERM ErlNifBinary ctx_bin; RIPEMD160_CTX ctx_clone; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != RIPEMD160_CTX_LEN) { return enif_make_badarg(env); } @@ -956,7 +904,6 @@ static ERL_NIF_TERM sha(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) {/* (Data) */ ErlNifBinary ibin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &ibin)) { return enif_make_badarg(env); } @@ -968,7 +915,6 @@ static ERL_NIF_TERM sha(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) static ERL_NIF_TERM sha_init(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) {/* () */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); SHA1_Init((SHA_CTX *) enif_make_new_binary(env, SHA_CTX_LEN, &ret)); return ret; } @@ -977,7 +923,6 @@ static ERL_NIF_TERM sha_update(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv SHA_CTX* new_ctx; ErlNifBinary ctx_bin, data_bin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != SHA_CTX_LEN || !enif_inspect_iolist_as_binary(env, argv[1], &data_bin)) { return enif_make_badarg(env); @@ -993,7 +938,6 @@ static ERL_NIF_TERM sha_final(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[ ErlNifBinary ctx_bin; SHA_CTX ctx_clone; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != SHA_CTX_LEN) { return enif_make_badarg(env); } @@ -1007,7 +951,6 @@ static ERL_NIF_TERM sha224_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv #ifdef HAVE_SHA224 ErlNifBinary ibin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &ibin)) { return enif_make_badarg(env); } @@ -1023,7 +966,6 @@ static ERL_NIF_TERM sha224_init_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM {/* () */ #ifdef HAVE_SHA224 ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); SHA224_Init((SHA256_CTX *) enif_make_new_binary(env, sizeof(SHA256_CTX), &ret)); return ret; #else @@ -1036,7 +978,6 @@ static ERL_NIF_TERM sha224_update_nif(ErlNifEnv* env, int argc, const ERL_NIF_TE SHA256_CTX* new_ctx; ErlNifBinary ctx_bin, data_bin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != sizeof(SHA256_CTX) || !enif_inspect_iolist_as_binary(env, argv[1], &data_bin)) { return enif_make_badarg(env); @@ -1056,7 +997,6 @@ static ERL_NIF_TERM sha224_final_nif(ErlNifEnv* env, int argc, const ERL_NIF_TER ErlNifBinary ctx_bin; SHA256_CTX ctx_clone; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != sizeof(SHA256_CTX)) { return enif_make_badarg(env); } @@ -1073,7 +1013,6 @@ static ERL_NIF_TERM sha256_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv #ifdef HAVE_SHA256 ErlNifBinary ibin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &ibin)) { return enif_make_badarg(env); } @@ -1089,7 +1028,6 @@ static ERL_NIF_TERM sha256_init_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM {/* () */ #ifdef HAVE_SHA256 ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); SHA256_Init((SHA256_CTX *) enif_make_new_binary(env, sizeof(SHA256_CTX), &ret)); return ret; #else @@ -1102,7 +1040,6 @@ static ERL_NIF_TERM sha256_update_nif(ErlNifEnv* env, int argc, const ERL_NIF_TE SHA256_CTX* new_ctx; ErlNifBinary ctx_bin, data_bin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != sizeof(SHA256_CTX) || !enif_inspect_iolist_as_binary(env, argv[1], &data_bin)) { return enif_make_badarg(env); @@ -1122,7 +1059,6 @@ static ERL_NIF_TERM sha256_final_nif(ErlNifEnv* env, int argc, const ERL_NIF_TER ErlNifBinary ctx_bin; SHA256_CTX ctx_clone; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != sizeof(SHA256_CTX)) { return enif_make_badarg(env); } @@ -1139,7 +1075,6 @@ static ERL_NIF_TERM sha384_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv #ifdef HAVE_SHA384 ErlNifBinary ibin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &ibin)) { return enif_make_badarg(env); } @@ -1155,7 +1090,6 @@ static ERL_NIF_TERM sha384_init_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM {/* () */ #ifdef HAVE_SHA384 ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); SHA384_Init((SHA512_CTX *) enif_make_new_binary(env, sizeof(SHA512_CTX), &ret)); return ret; #else @@ -1168,7 +1102,6 @@ static ERL_NIF_TERM sha384_update_nif(ErlNifEnv* env, int argc, const ERL_NIF_TE SHA512_CTX* new_ctx; ErlNifBinary ctx_bin, data_bin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != sizeof(SHA512_CTX) || !enif_inspect_iolist_as_binary(env, argv[1], &data_bin)) { return enif_make_badarg(env); @@ -1188,7 +1121,6 @@ static ERL_NIF_TERM sha384_final_nif(ErlNifEnv* env, int argc, const ERL_NIF_TER ErlNifBinary ctx_bin; SHA512_CTX ctx_clone; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != sizeof(SHA512_CTX)) { return enif_make_badarg(env); } @@ -1205,7 +1137,6 @@ static ERL_NIF_TERM sha512_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv #ifdef HAVE_SHA512 ErlNifBinary ibin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &ibin)) { return enif_make_badarg(env); } @@ -1233,7 +1164,6 @@ static ERL_NIF_TERM sha512_update_nif(ErlNifEnv* env, int argc, const ERL_NIF_TE SHA512_CTX* new_ctx; ErlNifBinary ctx_bin, data_bin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != sizeof(SHA512_CTX) || !enif_inspect_iolist_as_binary(env, argv[1], &data_bin)) { return enif_make_badarg(env); @@ -1253,7 +1183,6 @@ static ERL_NIF_TERM sha512_final_nif(ErlNifEnv* env, int argc, const ERL_NIF_TER ErlNifBinary ctx_bin; SHA512_CTX ctx_clone; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != sizeof(SHA512_CTX)) { return enif_make_badarg(env); } @@ -1270,7 +1199,6 @@ static ERL_NIF_TERM md4(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) {/* (Data) */ ErlNifBinary ibin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &ibin)) { return enif_make_badarg(env); } @@ -1282,7 +1210,6 @@ static ERL_NIF_TERM md4(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) static ERL_NIF_TERM md4_init(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) {/* () */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); MD4_Init((MD4_CTX *) enif_make_new_binary(env, MD4_CTX_LEN, &ret)); return ret; } @@ -1291,7 +1218,6 @@ static ERL_NIF_TERM md4_update(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv MD4_CTX* new_ctx; ErlNifBinary ctx_bin, data_bin; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != MD4_CTX_LEN || !enif_inspect_iolist_as_binary(env, argv[1], &data_bin)) { return enif_make_badarg(env); @@ -1307,7 +1233,6 @@ static ERL_NIF_TERM md4_final(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[ ErlNifBinary ctx_bin; MD4_CTX ctx_clone; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &ctx_bin) || ctx_bin.size != MD4_CTX_LEN) { return enif_make_badarg(env); } @@ -1322,7 +1247,6 @@ static ERL_NIF_TERM md5_mac_n(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[ ErlNifBinary key, data; unsigned mac_sz; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || !enif_inspect_iolist_as_binary(env, argv[1], &data) || !enif_get_uint(env,argv[2],&mac_sz) || mac_sz > MD5_LEN) { @@ -1340,7 +1264,6 @@ static ERL_NIF_TERM sha_mac_n(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[ ErlNifBinary key, data; unsigned mac_sz; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || !enif_inspect_iolist_as_binary(env, argv[1], &data) || !enif_get_uint(env,argv[2],&mac_sz) || mac_sz > SHA_LEN) { @@ -1360,7 +1283,6 @@ static ERL_NIF_TERM sha224_mac_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM ErlNifBinary key, data; unsigned mac_sz; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || !enif_inspect_iolist_as_binary(env, argv[1], &data) || !enif_get_uint(env,argv[2],&mac_sz) || mac_sz > SHA224_DIGEST_LENGTH) { @@ -1383,7 +1305,6 @@ static ERL_NIF_TERM sha256_mac_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM ErlNifBinary key, data; unsigned mac_sz; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || !enif_inspect_iolist_as_binary(env, argv[1], &data) || !enif_get_uint(env,argv[2],&mac_sz) || mac_sz > SHA256_DIGEST_LENGTH) { @@ -1406,7 +1327,6 @@ static ERL_NIF_TERM sha384_mac_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM ErlNifBinary key, data; unsigned mac_sz; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || !enif_inspect_iolist_as_binary(env, argv[1], &data) || !enif_get_uint(env,argv[2],&mac_sz) || mac_sz > SHA384_DIGEST_LENGTH) { @@ -1430,7 +1350,6 @@ static ERL_NIF_TERM sha512_mac_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM ErlNifBinary key, data; unsigned mac_sz; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || !enif_inspect_iolist_as_binary(env, argv[1], &data) || !enif_get_uint(env,argv[2],&mac_sz) || mac_sz > SHA512_DIGEST_LENGTH) { @@ -1462,7 +1381,6 @@ static ERL_NIF_TERM hmac_init(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[ const EVP_MD *md; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (argv[0] == atom_sha) md = EVP_sha1(); #ifdef HAVE_SHA224 @@ -1502,7 +1420,6 @@ static ERL_NIF_TERM hmac_update(ErlNifEnv* env, int argc, const ERL_NIF_TERM arg ErlNifBinary data; struct hmac_context* obj; - CHECK_OSE_CRYPTO(); if (!enif_get_resource(env, argv[0], hmac_context_rtype, (void**)&obj) || !enif_inspect_iolist_as_binary(env, argv[1], &data)) { @@ -1529,7 +1446,6 @@ static ERL_NIF_TERM hmac_final(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv unsigned int req_len = 0; unsigned int mac_len; - CHECK_OSE_CRYPTO(); if (!enif_get_resource(env,argv[0],hmac_context_rtype, (void**)&obj) || (argc == 2 && !enif_get_uint(env, argv[1], &req_len))) { @@ -1564,7 +1480,6 @@ static ERL_NIF_TERM des_cbc_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM a DES_cblock ivec_clone; /* writable copy */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || key.size != 8 || !enif_inspect_binary(env, argv[1], &ivec) || ivec.size != 8 @@ -1587,7 +1502,6 @@ static ERL_NIF_TERM des_cfb_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM a DES_cblock ivec_clone; /* writable copy */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || key.size != 8 || !enif_inspect_binary(env, argv[1], &ivec) || ivec.size != 8 @@ -1607,7 +1521,6 @@ static ERL_NIF_TERM des_ecb_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM a ErlNifBinary key, text; DES_key_schedule schedule; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || key.size != 8 || !enif_inspect_iolist_as_binary(env, argv[1], &text) || text.size != 8) { return enif_make_badarg(env); @@ -1627,7 +1540,6 @@ static ERL_NIF_TERM des_ede3_cbc_crypt(ErlNifEnv* env, int argc, const ERL_NIF_T DES_cblock ivec_clone; /* writable copy */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key1) || key1.size != 8 || !enif_inspect_iolist_as_binary(env, argv[1], &key2) || key2.size != 8 @@ -1657,7 +1569,6 @@ static ERL_NIF_TERM des_ede3_cfb_crypt_nif(ErlNifEnv* env, int argc, const ERL_N DES_cblock ivec_clone; /* writable copy */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key1) || key1.size != 8 || !enif_inspect_iolist_as_binary(env, argv[1], &key2) || key2.size != 8 @@ -1714,7 +1625,6 @@ static ERL_NIF_TERM aes_cfb_128_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TE int new_ivlen = 0; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || !(key.size == 16 || key.size == 24 || key.size == 32) @@ -1744,7 +1654,6 @@ static ERL_NIF_TERM aes_ctr_encrypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM unsigned int num = 0; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || AES_set_encrypt_key(key.data, key.size*8, &aes_key) != 0 @@ -1777,7 +1686,6 @@ static ERL_NIF_TERM aes_ctr_stream_encrypt(ErlNifEnv* env, int argc, const ERL_N unsigned char * ivec2_buf; unsigned char * ecount2_buf; - CHECK_OSE_CRYPTO(); if (!enif_get_tuple(env, argv[0], &state_arity, &state_term) || state_arity != 4 @@ -1816,7 +1724,6 @@ static ERL_NIF_TERM aes_gcm_encrypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM unsigned char *outp; ERL_NIF_TERM out, out_tag; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || AES_set_encrypt_key(key.data, key.size*8, &aes_key) != 0 @@ -1866,7 +1773,6 @@ static ERL_NIF_TERM aes_gcm_decrypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM unsigned char *outp; ERL_NIF_TERM out; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || AES_set_encrypt_key(key.data, key.size*8, &aes_key) != 0 @@ -1937,7 +1843,6 @@ static ERL_NIF_TERM chacha20_poly1305_encrypt(ErlNifEnv* env, int argc, const ER unsigned char poly1305_key[32]; poly1305_state poly1305; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || key.size != 32 || !enif_inspect_binary(env, argv[1], &iv) || iv.size != CHACHA20_NONCE_LEN @@ -1991,7 +1896,6 @@ static ERL_NIF_TERM chacha20_poly1305_decrypt(ErlNifEnv* env, int argc, const ER unsigned char mac[POLY1305_TAG_LEN]; poly1305_state poly1305; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key) || key.size != 32 || !enif_inspect_binary(env, argv[1], &iv) || iv.size != CHACHA20_NONCE_LEN @@ -2045,7 +1949,6 @@ static ERL_NIF_TERM aes_ecb_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM a unsigned char* ret_ptr; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key_bin) || (key_bin.size != 16 && key_bin.size != 32) @@ -2074,7 +1977,6 @@ static ERL_NIF_TERM rand_bytes_1(ErlNifEnv* env, int argc, const ERL_NIF_TERM ar unsigned bytes; unsigned char* data; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_get_uint(env, argv[0], &bytes)) { return enif_make_badarg(env); } @@ -2088,7 +1990,6 @@ static ERL_NIF_TERM strong_rand_bytes_nif(ErlNifEnv* env, int argc, const ERL_NI unsigned bytes; unsigned char* data; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_get_uint(env, argv[0], &bytes)) { return enif_make_badarg(env); } @@ -2106,7 +2007,6 @@ static ERL_NIF_TERM rand_bytes_3(ErlNifEnv* env, int argc, const ERL_NIF_TERM ar unsigned char* data; unsigned top_mask, bot_mask; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_get_uint(env, argv[0], &bytes) || !enif_get_uint(env, argv[1], &top_mask) || !enif_get_uint(env, argv[2], &bot_mask)) { @@ -2130,7 +2030,6 @@ static ERL_NIF_TERM strong_rand_mpint_nif(ErlNifEnv* env, int argc, const ERL_NI unsigned dlen; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_get_uint(env, argv[0], &bits) || !enif_get_int(env, argv[1], &top) @@ -2200,7 +2099,6 @@ static ERL_NIF_TERM rand_uniform_nif(ErlNifEnv* env, int argc, const ERL_NIF_TER unsigned dlen; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!get_bn_from_mpint(env, argv[0], &bn_from) || !get_bn_from_mpint(env, argv[1], &bn_rand)) { @@ -2233,7 +2131,6 @@ static ERL_NIF_TERM mod_exp_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM arg unsigned extra_byte; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!get_bn_from_bin(env, argv[0], &bn_base) || !get_bn_from_bin(env, argv[1], &bn_exponent) @@ -2277,7 +2174,6 @@ static ERL_NIF_TERM dss_verify_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM DSA *dsa; int i; - CHECK_OSE_CRYPTO(); if (argv[0] == atom_sha) { if (enif_get_tuple(env, argv[1], &tpl_arity, &tpl_terms)) { @@ -2446,7 +2342,6 @@ static ERL_NIF_TERM rsa_verify_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM struct digest_type_t* digp = NULL; unsigned char* digest = NULL; - CHECK_OSE_CRYPTO(); digp = get_digest_type(type); if (!digp) { @@ -2508,7 +2403,6 @@ static ERL_NIF_TERM aes_cbc_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM a unsigned char* ret_ptr; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key_bin) || (key_bin.size != 16 && key_bin.size != 32) @@ -2569,7 +2463,6 @@ static ERL_NIF_TERM aes_ige_crypt_nif(ErlNifEnv* env, int argc, const ERL_NIF_TE unsigned char* ret_ptr; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key_bin) || (key_bin.size != 16 && key_bin.size != 32) @@ -2607,7 +2500,6 @@ static ERL_NIF_TERM do_exor(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) int i; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env,argv[0], &d1) || !enif_inspect_iolist_as_binary(env,argv[1], &d2) @@ -2629,7 +2521,6 @@ static ERL_NIF_TERM rc4_encrypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM arg RC4_KEY rc4_key; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env,argv[0], &key) || !enif_inspect_iolist_as_binary(env,argv[1], &data)) { @@ -2647,7 +2538,6 @@ static ERL_NIF_TERM rc4_set_key(ErlNifEnv* env, int argc, const ERL_NIF_TERM arg ErlNifBinary key; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env,argv[0], &key)) { return enif_make_badarg(env); @@ -2664,7 +2554,6 @@ static ERL_NIF_TERM rc4_encrypt_with_state(ErlNifEnv* env, int argc, const ERL_N RC4_KEY* rc4_key; ERL_NIF_TERM new_state, new_data; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env,argv[0], &state) || state.size != sizeof(RC4_KEY) @@ -2686,7 +2575,6 @@ static ERL_NIF_TERM rc2_cbc_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM a ERL_NIF_TERM ret; unsigned char iv_copy[8]; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key_bin) || (key_bin.size != 5 && key_bin.size != 8 && key_bin.size != 16) @@ -2748,7 +2636,6 @@ static ERL_NIF_TERM rsa_sign_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM ar struct digest_type_t *digp; unsigned char* digest; - CHECK_OSE_CRYPTO(); digp = get_digest_type(argv[0]); if (!digp) { @@ -2816,7 +2703,6 @@ static ERL_NIF_TERM dss_sign_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM ar DSA* dsa; int i; - CHECK_OSE_CRYPTO(); if (argv[0] == atom_sha) { if (enif_get_tuple(env, argv[1], &tpl_arity, &tpl_terms)) { @@ -2903,7 +2789,6 @@ static ERL_NIF_TERM rsa_public_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TER int padding, i; RSA* rsa; - CHECK_OSE_CRYPTO(); rsa = RSA_new(); @@ -2953,7 +2838,6 @@ static ERL_NIF_TERM rsa_private_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TE int padding, i; RSA* rsa; - CHECK_OSE_CRYPTO(); rsa = RSA_new(); @@ -3001,7 +2885,6 @@ static ERL_NIF_TERM dh_generate_parameters_nif(ErlNifEnv* env, int argc, const E unsigned char *p_ptr, *g_ptr; ERL_NIF_TERM ret_p, ret_g; - CHECK_OSE_CRYPTO(); if (!enif_get_int(env, argv[0], &prime_len) || !enif_get_int(env, argv[1], &generator)) { @@ -3030,7 +2913,6 @@ static ERL_NIF_TERM dh_check(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[] int i; ERL_NIF_TERM ret, head, tail; - CHECK_OSE_CRYPTO(); dh_params = DH_new(); @@ -3066,7 +2948,6 @@ static ERL_NIF_TERM dh_generate_key_nif(ErlNifEnv* env, int argc, const ERL_NIF_ ERL_NIF_TERM ret, ret_pub, ret_prv, head, tail; int mpint; /* 0 or 4 */ - CHECK_OSE_CRYPTO(); dh_params = DH_new(); @@ -3112,7 +2993,6 @@ static ERL_NIF_TERM dh_compute_key_nif(ErlNifEnv* env, int argc, const ERL_NIF_T ErlNifBinary ret_bin; ERL_NIF_TERM ret, head, tail; - CHECK_OSE_CRYPTO(); dh_params = DH_new(); @@ -3154,7 +3034,6 @@ static ERL_NIF_TERM srp_value_B_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM unsigned dlen; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!get_bn_from_bin(env, argv[0], &bn_multiplier) || !get_bn_from_bin(env, argv[1], &bn_verifier) @@ -3216,7 +3095,6 @@ static ERL_NIF_TERM srp_user_secret_nif(ErlNifEnv* env, int argc, const ERL_NIF_ unsigned dlen; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!get_bn_from_bin(env, argv[0], &bn_a) || !get_bn_from_bin(env, argv[1], &bn_u) @@ -3297,7 +3175,6 @@ static ERL_NIF_TERM srp_host_secret_nif(ErlNifEnv* env, int argc, const ERL_NIF_ unsigned dlen; ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!get_bn_from_bin(env, argv[0], &bn_verifier) || !get_bn_from_bin(env, argv[1], &bn_b) @@ -3359,7 +3236,6 @@ static ERL_NIF_TERM bf_cfb64_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM int bf_n = 0; /* blowfish ivec pos */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key_bin) || !enif_inspect_binary(env, argv[1], &ivec_bin) @@ -3384,7 +3260,6 @@ static ERL_NIF_TERM bf_cbc_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM ar unsigned char bf_tkey[8]; /* blowfish ivec */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key_bin) || !enif_inspect_binary(env, argv[1], &ivec_bin) @@ -3409,7 +3284,6 @@ static ERL_NIF_TERM bf_ecb_crypt(ErlNifEnv* env, int argc, const ERL_NIF_TERM ar BF_KEY bf_key; /* blowfish key 8 */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key_bin) || !enif_inspect_iolist_as_binary(env, argv[1], &data_bin) @@ -3431,7 +3305,6 @@ static ERL_NIF_TERM blowfish_ofb64_encrypt(ErlNifEnv* env, int argc, const ERL_N int bf_n = 0; /* blowfish ivec pos */ ERL_NIF_TERM ret; - CHECK_OSE_CRYPTO(); if (!enif_inspect_iolist_as_binary(env, argv[0], &key_bin) || !enif_inspect_binary(env, argv[1], &ivec_bin) @@ -3756,7 +3629,6 @@ static ERL_NIF_TERM ec_key_generate(ErlNifEnv* env, int argc, const ERL_NIF_TERM ERL_NIF_TERM priv_key; ERL_NIF_TERM pub_key = atom_undefined; - CHECK_OSE_CRYPTO(); if (!get_ec_key(env, argv[0], argv[1], atom_undefined, &key)) goto badarg; @@ -3799,7 +3671,6 @@ static ERL_NIF_TERM ecdsa_sign_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM struct digest_type_t *digp; unsigned char* digest; - CHECK_OSE_CRYPTO(); digp = get_digest_type(argv[0]); if (!digp) { @@ -3868,7 +3739,6 @@ static ERL_NIF_TERM ecdsa_verify_nif(ErlNifEnv* env, int argc, const ERL_NIF_TER struct digest_type_t* digp = NULL; unsigned char* digest = NULL; - CHECK_OSE_CRYPTO(); digp = get_digest_type(type); if (!digp) { @@ -3933,7 +3803,6 @@ static ERL_NIF_TERM ecdh_compute_key_nif(ErlNifEnv* env, int argc, const ERL_NIF EC_POINT *my_ecpoint; EC_KEY *other_ecdh = NULL; - CHECK_OSE_CRYPTO(); if (!get_ec_key(env, argv[1], argv[2], atom_undefined, &key)) return enif_make_badarg(env); @@ -3978,7 +3847,6 @@ out_err: static ERL_NIF_TERM rand_seed_nif(ErlNifEnv* env, int argc, const ERL_NIF_TERM argv[]) { ErlNifBinary seed_bin; - CHECK_OSE_CRYPTO(); if (!enif_inspect_binary(env, argv[0], &seed_bin)) return enif_make_badarg(env); RAND_seed(seed_bin.data,seed_bin.size); diff --git a/lib/crypto/test/crypto_SUITE.erl b/lib/crypto/test/crypto_SUITE.erl index e84f5e1075..0b955c0965 100644 --- a/lib/crypto/test/crypto_SUITE.erl +++ b/lib/crypto/test/crypto_SUITE.erl @@ -118,10 +118,10 @@ init_per_suite(Config) -> _ -> Config catch error:low_entropy -> - %% Make sure we are on OSE, otherwise we want to crash - {ose,_} = os:type(), + %% We are testing on an OS with low entropy in its random + %% seed. So we have to seed it with a binary to get started. - %% This is NOT how you want to seed this, it is just here + %% This is NOT how you want to do seeding, it is just here %% to make the tests pass. Check your OS manual for how you %% really want to seed. {H,M,L} = erlang:now(), diff --git a/lib/erl_docgen/priv/css/otp_doc.css b/lib/erl_docgen/priv/css/otp_doc.css index 0b531db701..347782eb1e 100644 --- a/lib/erl_docgen/priv/css/otp_doc.css +++ b/lib/erl_docgen/priv/css/otp_doc.css @@ -37,7 +37,7 @@ a:visited { color: blue; text-decoration: none } top: 0; bottom: 0; left: 0; - width: 200px; + width: 300px; overflow:auto; margin: 0; padding: 1px; @@ -45,7 +45,7 @@ a:visited { color: blue; text-decoration: none } } #content { - margin-left: 240px; /* set left value to WidthOfFrameDiv */ + margin-left: 340px; /* set left value to WidthOfFrameDiv */ } .frontpage diff --git a/lib/erl_interface/src/Makefile.in b/lib/erl_interface/src/Makefile.in index 777d709b1e..d6176ec053 100644 --- a/lib/erl_interface/src/Makefile.in +++ b/lib/erl_interface/src/Makefile.in @@ -126,11 +126,7 @@ else WARNFLAGS = @WFLAGS@ endif -ifneq ($(findstring ose,$(TARGET)),ose) CFLAGS = @LIB_CFLAGS@ $(WARNFLAGS) $(INCFLAGS) $(TYPE_FLAGS) -else -CFLAGS = @CFLAGS@ $(INCFLAGS) -endif PROG_CFLAGS = @CFLAGS@ $(WARNFLAGS) $(INCFLAGS) $(TYPE_FLAGS) -Ilegacy ifeq ($(findstring vxworks,$(TARGET)),vxworks) @@ -210,12 +206,8 @@ MDD_ERLLIB = $(OBJDIR)/$(LIBPRE)erl_interface_mdd$(LIBEXT) # Specify targets to build ########################################################################### -ifneq ($(findstring ose,$(TARGET)),ose) EXE_TARGETS = \ $(ERL_CALL) -else -EXE_TARGETS = -endif ifeq ($(USING_VC),yes) @@ -480,44 +472,6 @@ ERLSOURCES = \ SOURCES = $(EISOURCES) $(ERLSOURCES) -OSE_EISOURCES = \ - $(DECODESRC) \ - $(ENCODESRC) \ - misc/ei_decode_term.c \ - misc/ei_format.c \ - misc/ei_locking.c \ - misc/ei_malloc.c \ - misc/ei_printterm.c \ - misc/ei_pthreads.c \ - misc/ei_trace.c \ - misc/ei_x_encode.c \ - misc/eimd5.c \ - misc/get_type.c \ - misc/show_msg.c \ - misc/ei_compat.c \ - registry/hash_dohash.c \ - registry/hash_foreach.c \ - registry/hash_freetab.c \ - registry/hash_insert.c \ - registry/hash_isprime.c \ - registry/hash_lookup.c \ - registry/hash_newtab.c \ - registry/hash_remove.c \ - registry/hash_resize.c \ - registry/hash_rlookup.c - -OSE_ERLSOURCES = \ - legacy/decode_term.c \ - legacy/encode_term.c \ - legacy/erl_error.c \ - legacy/erl_eterm.c \ - legacy/erl_fix_alloc.c \ - legacy/erl_format.c \ - legacy/erl_malloc.c \ - legacy/erl_marshal.c - -OSE_SOURCES = $(OSE_EISOURCES) $(OSE_ERLSOURCES) - NEVERUSED = \ whereis.c \ ei_send.c \ @@ -532,13 +486,8 @@ ERLCALL = \ # Note that encode/decode_term.c defines ei functions that is # located in the erl_interface library, not ei library. -ifneq ($(findstring ose,$(TARGET)),ose) ST_EIOBJECTS = $(addprefix $(ST_OBJDIR)/,$(notdir $(EISOURCES:.c=.o))) ST_ERLOBJECTS = $(addprefix $(ST_OBJDIR)/,$(notdir $(ERLSOURCES:.c=.o))) -else -ST_EIOBJECTS = $(addprefix $(ST_OBJDIR)/,$(notdir $(OSE_EISOURCES:.c=.o))) -ST_ERLOBJECTS = $(addprefix $(ST_OBJDIR)/,$(notdir $(OSE_ERLSOURCES:.c=.o))) -endif MT_EIOBJECTS = $(addprefix $(MT_OBJDIR)/,$(notdir $(EISOURCES:.c=.o))) MT_ERLOBJECTS = $(addprefix $(MT_OBJDIR)/,$(notdir $(ERLSOURCES:.c=.o))) MD_EIOBJECTS = $(addprefix $(MD_OBJDIR)/,$(notdir $(EISOURCES:.c=.o))) @@ -587,14 +536,6 @@ $(TARGET)/config.h: $(V_at)echo "#define HAVE_SOCKLEN_T 1" >> $@ endif -ifeq ($(findstring ose,$(TARGET)),ose) -$(TARGET)/config.h: - $(gen_verbose) - $(V_at)echo "/* Generated by Makefile */" > $@ - $(V_at)echo "#define HAVE_STRERROR 1" >> $@ - $(V_at)echo "#define HAVE_SOCKLEN_T 1" >> $@ -endif - ########################################################################### # Default rules, normal and threaded ########################################################################### @@ -719,9 +660,6 @@ $(ST_OBJDIR)/erl_start.o: prog/erl_start.c $(V_CC) $(CFLAGS) -c $< -o $@ else -ifeq ($(findstring ose,$(TARGET)),ose) -$(ERL_CALL): -else ifdef THR_DEFS $(ERL_CALL): $(ERLCALL) ../include/ei.h $(MT_EILIB) $(ld_verbose)$(PURIFY) $(CC) $(PROG_CFLAGS) $(THR_DEFS) $(LDFLAGS) -o $@ $(ERLCALL) \ @@ -733,7 +671,6 @@ $(ERL_CALL): $(ERLCALL) ../include/ei.h $(ST_EILIB) endif endif endif -endif ########################################################################### # Fake application targets used to test header files and linking diff --git a/lib/hipe/cerl/erl_bif_types.erl b/lib/hipe/cerl/erl_bif_types.erl index f49089d41c..dc149c0d8c 100644 --- a/lib/hipe/cerl/erl_bif_types.erl +++ b/lib/hipe/cerl/erl_bif_types.erl @@ -913,8 +913,7 @@ type(erlang, system_info, 1, Xs, Opaques) -> t_list(t_pid()); ['os_type'] -> t_tuple([t_sup([t_atom('unix'), - t_atom('win32'), - t_atom('ose')]), + t_atom('win32')]), t_atom()]); ['os_version'] -> t_sup(t_tuple([t_non_neg_fixnum(), diff --git a/lib/kernel/doc/src/notes.xml b/lib/kernel/doc/src/notes.xml index b8db22aba7..e759f214df 100644 --- a/lib/kernel/doc/src/notes.xml +++ b/lib/kernel/doc/src/notes.xml @@ -423,8 +423,7 @@ Erlang/OTP has been ported to the realtime operating system OSE. The port supports both smp and non-smp emulator. For details around the port and how to started - see the User's Guide in the <seealso - marker="ose:ose_intro">ose</seealso> application. </p> + see the User's Guide in the ose application. </p> <p> Note that not all parts of Erlang/OTP has been ported. </p> <p> diff --git a/lib/kernel/doc/src/ref_man.xml.src b/lib/kernel/doc/src/ref_man.xml.src deleted file mode 100644 index 7eb48a5f1d..0000000000 --- a/lib/kernel/doc/src/ref_man.xml.src +++ /dev/null @@ -1,68 +0,0 @@ -<?xml version="1.0" encoding="utf-8" ?> -<!DOCTYPE application SYSTEM "application.dtd"> - -<application xmlns:xi="http://www.w3.org/2001/XInclude"> - <header> - <copyright> - <year>1996</year><year>2013</year> - <holder>Ericsson AB. All Rights Reserved.</holder> - </copyright> - <legalnotice> - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - - </legalnotice> - - <title>Kernel Reference Manual</title> - <prepared></prepared> - <docno></docno> - <date></date> - <rev></rev> - </header> - <description> - <p>The <em>Kernel</em> application has all the code necessary to run - the Erlang runtime system itself: file servers and code servers - and so on.</p> - </description> - <xi:include href="kernel_app.xml"/> - <xi:include href="application.xml"/> - <xi:include href="auth.xml"/> - <xi:include href="code.xml"/> - <xi:include href="disk_log.xml"/> - <xi:include href="erl_boot_server.xml"/> - <xi:include href="erl_ddll.xml"/> - <xi:include href="erl_prim_loader_stub.xml"/> - <xi:include href="erlang_stub.xml"/> - <xi:include href="error_handler.xml"/> - <xi:include href="error_logger.xml"/> - <xi:include href="file.xml"/> - <xi:include href="gen_tcp.xml"/> - <xi:include href="gen_udp.xml"/> - <xi:include href="gen_sctp.xml"/> - <xi:include href="global.xml"/> - <xi:include href="global_group.xml"/> - <xi:include href="heart.xml"/> - <xi:include href="inet.xml"/> - <xi:include href="inet_res.xml"/> - <xi:include href="init_stub.xml"/> - <xi:include href="net_adm.xml"/> - <xi:include href="net_kernel.xml"/> - <xi:include href="os.xml"/> - <xi:include href="pg2.xml"/> - <xi:include href="rpc.xml"/> - <xi:include href="seq_trace.xml"/> - <xi:include href="user.xml"/> - <xi:include href="wrap_log_reader.xml"/> - <xi:include href="zlib_stub.xml"/> - <xi:include href="app.xml"/> - <xi:include href="config.xml"/> -</application> diff --git a/lib/kernel/src/inet_config.erl b/lib/kernel/src/inet_config.erl index 803fae846e..a0d5344f11 100644 --- a/lib/kernel/src/inet_config.erl +++ b/lib/kernel/src/inet_config.erl @@ -188,9 +188,6 @@ do_load_resolv({win32,Type}, longnames) -> win32_load_from_registry(Type), inet_db:set_lookup([native]); -do_load_resolv({ose,_}, _) -> - inet_db:set_lookup([file]); - do_load_resolv(_, _) -> inet_db:set_lookup([native]). diff --git a/lib/kernel/src/os.erl b/lib/kernel/src/os.erl index 3330b38d84..ffb899e5ca 100644 --- a/lib/kernel/src/os.erl +++ b/lib/kernel/src/os.erl @@ -93,7 +93,7 @@ unsetenv(_) -> %%% End of BIFs -spec type() -> {Osfamily, Osname} when - Osfamily :: unix | win32 | ose, + Osfamily :: unix | win32, Osname :: atom(). type() -> diff --git a/lib/kernel/test/erl_prim_loader_SUITE.erl b/lib/kernel/test/erl_prim_loader_SUITE.erl index 0803cf428f..ffcde5e458 100644 --- a/lib/kernel/test/erl_prim_loader_SUITE.erl +++ b/lib/kernel/test/erl_prim_loader_SUITE.erl @@ -260,46 +260,41 @@ multiple_slaves(doc) -> ["Start nodes in parallell, all using the 'inet' loading method, ", "verify that the boot server manages"]; multiple_slaves(Config) when is_list(Config) -> - case os:type() of - {ose,_} -> - {comment, "OSE: multiple nodes not supported"}; - _ -> - ?line Name = erl_prim_test_multiple_slaves, - ?line Host = host(), - ?line Cookie = atom_to_list(erlang:get_cookie()), - ?line IpStr = ip_str(Host), - ?line LFlag = get_loader_flag(os:type()), - ?line Args = LFlag ++ " -hosts " ++ IpStr ++ - " -setcookie " ++ Cookie, - - NoOfNodes = 10, % no of slave nodes to be started - - NamesAndNodes = - lists:map(fun(N) -> - NameN = atom_to_list(Name) ++ - integer_to_list(N), - NodeN = NameN ++ "@" ++ Host, - {list_to_atom(NameN),list_to_atom(NodeN)} - end, lists:seq(1, NoOfNodes)), - - ?line Nodes = start_multiple_nodes(NamesAndNodes, Args, []), - - %% "queue up" the nodes to wait for the boot server to respond - %% (note: test_server supervises each node start by accept() - %% on a socket, the timeout value for the accept has to be quite - %% long for this test to work). - ?line test_server:sleep(test_server:seconds(5)), - %% start the code loading circus! - ?line {ok,BootPid} = erl_boot_server:start_link([Host]), - %% give the nodes a chance to boot up before attempting to stop them - ?line test_server:sleep(test_server:seconds(10)), + ?line Name = erl_prim_test_multiple_slaves, + ?line Host = host(), + ?line Cookie = atom_to_list(erlang:get_cookie()), + ?line IpStr = ip_str(Host), + ?line LFlag = get_loader_flag(os:type()), + ?line Args = LFlag ++ " -hosts " ++ IpStr ++ + " -setcookie " ++ Cookie, + + NoOfNodes = 10, % no of slave nodes to be started + + NamesAndNodes = + lists:map(fun(N) -> + NameN = atom_to_list(Name) ++ + integer_to_list(N), + NodeN = NameN ++ "@" ++ Host, + {list_to_atom(NameN),list_to_atom(NodeN)} + end, lists:seq(1, NoOfNodes)), + + ?line Nodes = start_multiple_nodes(NamesAndNodes, Args, []), + + %% "queue up" the nodes to wait for the boot server to respond + %% (note: test_server supervises each node start by accept() + %% on a socket, the timeout value for the accept has to be quite + %% long for this test to work). + ?line test_server:sleep(test_server:seconds(5)), + %% start the code loading circus! + ?line {ok,BootPid} = erl_boot_server:start_link([Host]), + %% give the nodes a chance to boot up before attempting to stop them + ?line test_server:sleep(test_server:seconds(10)), - ?line wait_and_shutdown(lists:reverse(Nodes), 30), + ?line wait_and_shutdown(lists:reverse(Nodes), 30), - ?line unlink(BootPid), - ?line exit(BootPid, kill), - ok - end. + ?line unlink(BootPid), + ?line exit(BootPid, kill), + ok. start_multiple_nodes([{Name,Node} | NNs], Args, Started) -> ?line {ok,Node} = start_node(Name, Args, [{wait, false}]), diff --git a/lib/kernel/test/file_SUITE.erl b/lib/kernel/test/file_SUITE.erl index 8856be31c2..5263130574 100644 --- a/lib/kernel/test/file_SUITE.erl +++ b/lib/kernel/test/file_SUITE.erl @@ -167,12 +167,7 @@ init_per_suite(Config) when is_list(Config) -> ok -> [{sasl,started}] end, - ok = case os:type() of - {ose,_} -> - ok; - _ -> - application:start(os_mon) - end, + application:start(os_mon), case os:type() of {win32, _} -> @@ -198,12 +193,7 @@ end_per_suite(Config) when is_list(Config) -> ok end, - case os:type() of - {ose,_} -> - ok; - _ -> - application:stop(os_mon) - end, + application:stop(os_mon), case proplists:get_value(sasl, Config) of started -> application:stop(sasl); @@ -888,10 +878,7 @@ open1(Config) when is_list(Config) -> ?line io:format(Fd1,Str,[]), ?line {ok,0} = ?FILE_MODULE:position(Fd1,bof), ?line Str = io:get_line(Fd1,''), - ?line case io:get_line(Fd2,'') of - Str -> Str; - eof -> Str - end, + ?line Str = io:get_line(Fd2,''), ?line ok = ?FILE_MODULE:close(Fd2), ?line {ok,0} = ?FILE_MODULE:position(Fd1,bof), ?line ok = ?FILE_MODULE:truncate(Fd1), @@ -2346,9 +2333,6 @@ e_rename(Config) when is_list(Config) -> %% At least Windows NT can %% successfully move a file to %% another drive. - ok; - {ose, _} -> - %% disabled for now ok end, [] = flush(), diff --git a/lib/kernel/test/gen_tcp_misc_SUITE.erl b/lib/kernel/test/gen_tcp_misc_SUITE.erl index 81c6dcd0fd..3adca83ec9 100644 --- a/lib/kernel/test/gen_tcp_misc_SUITE.erl +++ b/lib/kernel/test/gen_tcp_misc_SUITE.erl @@ -58,14 +58,6 @@ oct_acceptor/1, otp_7731_server/1, zombie_server/2, do_iter_max_socks/2]). -init_per_testcase(wrapping_oct, Config) when is_list(Config) -> - Dog = case os:type() of - {ose,_} -> - test_server:timetrap(test_server:minutes(20)); - _Else -> - test_server:timetrap(test_server:seconds(600)) - end, - [{watchdog, Dog}|Config]; init_per_testcase(iter_max_socks, Config) when is_list(Config) -> Dog = case os:type() of {win32,_} -> @@ -74,14 +66,6 @@ init_per_testcase(iter_max_socks, Config) when is_list(Config) -> test_server:timetrap(test_server:seconds(240)) end, [{watchdog, Dog}|Config]; -init_per_testcase(accept_system_limit, Config) when is_list(Config) -> - case os:type() of - {ose,_} -> - {skip,"Skip in OSE"}; - _ -> - Dog = test_server:timetrap(test_server:seconds(240)), - [{watchdog,Dog}|Config] - end; init_per_testcase(wrapping_oct, Config) when is_list(Config) -> Dog = test_server:timetrap(test_server:seconds(600)), [{watchdog, Dog}|Config]; diff --git a/lib/kernel/test/prim_file_SUITE.erl b/lib/kernel/test/prim_file_SUITE.erl index 3e6d8492f7..366231d2cc 100644 --- a/lib/kernel/test/prim_file_SUITE.erl +++ b/lib/kernel/test/prim_file_SUITE.erl @@ -455,10 +455,7 @@ open1(Config) when is_list(Config) -> ?line ?PRIM_FILE:write(Fd1,Str), ?line {ok,0} = ?PRIM_FILE:position(Fd1,bof), ?line {ok, Str} = ?PRIM_FILE:read(Fd1,Length), - ?line case ?PRIM_FILE:read(Fd2,Length) of - {ok,Str} -> Str; - eof -> Str - end, + ?line {ok, Str} = ?PRIM_FILE:read(Fd2,Length), ?line ok = ?PRIM_FILE:close(Fd2), ?line {ok,0} = ?PRIM_FILE:position(Fd1,bof), ?line ok = ?PRIM_FILE:truncate(Fd1), @@ -1629,7 +1626,7 @@ e_rename(Config) when is_list(Config) -> %% successfully move a file to %% another drive. ok; - {unix, _ } -> + _ -> OtherFs = "/tmp", ?line NameOnOtherFs = filename:join(OtherFs, @@ -1653,10 +1650,7 @@ e_rename(Config) when is_list(Config) -> Else -> Else end, - Com; - {ose, _} -> - %% disabled for now - ok + Com end, ?line test_server:timetrap_cancel(Dog), Comment. diff --git a/lib/ose/Makefile b/lib/ose/Makefile deleted file mode 100644 index 6119b75c3f..0000000000 --- a/lib/ose/Makefile +++ /dev/null @@ -1,37 +0,0 @@ -# -# %CopyrightBegin% -# -# Copyright Ericsson AB 1996-2009. All Rights Reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# -# %CopyrightEnd% -# -include $(ERL_TOP)/make/target.mk -include $(ERL_TOP)/make/$(TARGET)/otp.mk - -# -# Macros -# - -SUB_DIRECTORIES = src doc/src - -include vsn.mk -VSN = $(OSE_VSN) - -SPECIAL_TARGETS = - -# -# Default Subdir Targets -# -include $(ERL_TOP)/make/otp_subdir.mk diff --git a/lib/ose/doc/html/.gitignore b/lib/ose/doc/html/.gitignore deleted file mode 100644 index e69de29bb2..0000000000 --- a/lib/ose/doc/html/.gitignore +++ /dev/null diff --git a/lib/ose/doc/man3/.gitignore b/lib/ose/doc/man3/.gitignore deleted file mode 100644 index e69de29bb2..0000000000 --- a/lib/ose/doc/man3/.gitignore +++ /dev/null diff --git a/lib/ose/doc/man6/.gitignore b/lib/ose/doc/man6/.gitignore deleted file mode 100644 index e69de29bb2..0000000000 --- a/lib/ose/doc/man6/.gitignore +++ /dev/null diff --git a/lib/ose/doc/pdf/.gitignore b/lib/ose/doc/pdf/.gitignore deleted file mode 100644 index e69de29bb2..0000000000 --- a/lib/ose/doc/pdf/.gitignore +++ /dev/null diff --git a/lib/ose/doc/src/.gitignore b/lib/ose/doc/src/.gitignore deleted file mode 100644 index 860e9e703e..0000000000 --- a/lib/ose/doc/src/.gitignore +++ /dev/null @@ -1 +0,0 @@ -ose.xml diff --git a/lib/ose/doc/src/Makefile b/lib/ose/doc/src/Makefile deleted file mode 100644 index 7ebd4125ba..0000000000 --- a/lib/ose/doc/src/Makefile +++ /dev/null @@ -1,133 +0,0 @@ -# -# %CopyrightBegin% -# -# Copyright Ericsson AB 1997-2012. All Rights Reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# -# %CopyrightEnd% -# -include $(ERL_TOP)/make/target.mk -include $(ERL_TOP)/make/$(TARGET)/otp.mk - -# ---------------------------------------------------- -# Application version -# ---------------------------------------------------- -include ../../vsn.mk -VSN=$(OSE_VSN) -APPLICATION=ose - -# ---------------------------------------------------- -# Release directory specification -# ---------------------------------------------------- -RELSYSDIR = $(RELEASE_PATH)/lib/$(APPLICATION)-$(VSN) - -# ---------------------------------------------------- -# Help application directory specification -# ---------------------------------------------------- -EDOC_DIR = $(ERL_TOP)/lib/edoc -SYNTAX_TOOLS_DIR = $(ERL_TOP)/lib/syntax_tools - -# ---------------------------------------------------- -# Target Specs -# ---------------------------------------------------- -XML_APPLICATION_FILES = ref_man.xml - -XML_REF3_FILES = \ - ose.xml \ - ose_erl_driver.xml - -XML_REF6_FILES = ose_app.xml - -XML_PART_FILES = part.xml -XML_CHAPTER_FILES = notes.xml ose_intro.xml ose_signals_chapter.xml - -BOOK_FILES = book.xml - -XML_FILES = \ - $(BOOK_FILES) $(XML_CHAPTER_FILES) \ - $(XML_PART_FILES) $(XML_REF3_FILES) $(XML_REF6_FILES) \ - $(XML_APPLICATION_FILES) - -# ---------------------------------------------------- - -HTML_FILES = $(XML_APPLICATION_FILES:%.xml=$(HTMLDIR)/%.html) \ - $(XML_PART_FILES:%.xml=$(HTMLDIR)/%.html) - -INFO_FILE = ../../info - -MAN3_FILES = $(XML_REF3_FILES:%.xml=$(MAN3DIR)/%.3) -MAN6_FILES = $(XML_REF6_FILES:%_app.xml=$(MAN6DIR)/%.6) - -HTML_REF_MAN_FILE = $(HTMLDIR)/index.html - -TOP_PDF_FILE = $(PDFDIR)/$(APPLICATION)-$(VSN).pdf - -SPECS_FILES = - -TOP_SPECS_FILE = - -# ---------------------------------------------------- -# FLAGS -# ---------------------------------------------------- -XML_FLAGS += - -SPECS_FLAGS = -I../../include -I../../../kernel/include - -OSE_SRC_DIR = ../../src - -# ---------------------------------------------------- -# Targets -# ---------------------------------------------------- -docs: man pdf html - -$(TOP_PDF_FILE): $(XML_FILES) - -pdf: $(TOP_PDF_FILE) - -html: $(HTML_REF_MAN_FILE) - -man: $(MAN3_FILES) $(MAN6_FILES) - -ose.xml: $(OSE_SRC_DIR)/ose.erl - escript $(DOCGEN)/priv/bin/xml_from_edoc.escript\ - $(OSE_SRC_DIR)/$(@:%.xml=%.erl) - -debug opt: - -clean clean_docs: - rm -rf $(HTMLDIR)/* - rm -f $(MAN3DIR)/* - rm -f $(MAN6DIR)/* - rm -f $(TOP_PDF_FILE) $(TOP_PDF_FILE:%.pdf=%.fo) - rm -f $(SPECDIR)/* - rm -f errs core *~ - -# ---------------------------------------------------- -# Release Target -# ---------------------------------------------------- -include $(ERL_TOP)/make/otp_release_targets.mk - -release_docs_spec: docs - $(INSTALL_DIR) "$(RELSYSDIR)/doc/pdf" - $(INSTALL_DATA) $(TOP_PDF_FILE) "$(RELSYSDIR)/doc/pdf" - $(INSTALL_DIR) "$(RELSYSDIR)/doc/html" - $(INSTALL_DATA) $(HTMLDIR)/* \ - "$(RELSYSDIR)/doc/html" - $(INSTALL_DATA) $(INFO_FILE) "$(RELSYSDIR)" - $(INSTALL_DIR) "$(RELEASE_PATH)/man/man3" - $(INSTALL_DATA) $(MAN3DIR)/* "$(RELEASE_PATH)/man/man3" - $(INSTALL_DIR) "$(RELEASE_PATH)/man/man6" - $(INSTALL_DATA) $(MAN6_FILES) "$(RELEASE_PATH)/man/man6" - -release_spec: diff --git a/lib/ose/doc/src/book.xml b/lib/ose/doc/src/book.xml deleted file mode 100644 index d62e0d32f4..0000000000 --- a/lib/ose/doc/src/book.xml +++ /dev/null @@ -1,49 +0,0 @@ -<?xml version="1.0" encoding="utf-8" ?> -<!DOCTYPE book SYSTEM "book.dtd"> - -<book xmlns:xi="http://www.w3.org/2001/XInclude"> - <header titlestyle="normal"> - <copyright> - <year>2014</year><year>2014</year> - <holder>Ericsson AB. All Rights Reserved.</holder> - </copyright> - <legalnotice> - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - - </legalnotice> - - <title>OSE</title> - <prepared>Lukas Larsson</prepared> - <docno></docno> - <date>2014-01-08</date> - <rev>1.0</rev> - <file>book.xml</file> - </header> - <insidecover> - </insidecover> - <pagetext>OSE</pagetext> - <preamble> - <contents level="2"></contents> - </preamble> - <parts> - <xi:include href="part.xml"/> - </parts> - <applications> - <xi:include href="ref_man.xml"/> - </applications> - <releasenotes> - <xi:include href="notes.xml"/> - </releasenotes> - <listofterms></listofterms> - <index></index> -</book> diff --git a/lib/ose/doc/src/notes.xml b/lib/ose/doc/src/notes.xml deleted file mode 100644 index 06881b6c99..0000000000 --- a/lib/ose/doc/src/notes.xml +++ /dev/null @@ -1,109 +0,0 @@ -<?xml version="1.0" encoding="utf-8" ?> -<!DOCTYPE chapter SYSTEM "chapter.dtd"> - -<chapter> - <header> - <copyright> - <year>2014</year><year>2014</year> - <holder>Ericsson AB. All Rights Reserved.</holder> - </copyright> - <legalnotice> - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - - </legalnotice> - - <title>OSE Release Notes</title> - <prepared></prepared> - <docno></docno> - <date></date> - <rev></rev> - <file>notes.xml</file> - </header> - <p>This document describes the changes made to the OSE application.</p> - -<section><title>Ose 1.1</title> - - <section><title>Improvements and New Features</title> - <list> - <item> - <p> - Change license text from Erlang Public License to Apache - Public License v2</p> - <p> - Own Id: OTP-12845</p> - </item> - </list> - </section> - -</section> - -<section><title>Ose 1.0.2</title> - - <section><title>Fixed Bugs and Malfunctions</title> - <list> - <item> - <p> - Add missing release notes for the OSE application.</p> - <p> - Own Id: OTP-12177</p> - </item> - </list> - </section> - -</section> - -<section><title>Ose 1.0.1</title> - - <section><title>Fixed Bugs and Malfunctions</title> - <list> - <item> - <p> - Fix some spelling mistakes in documentation</p> - <p> - Own Id: OTP-12152</p> - </item> - </list> - </section> - -</section> - -<section><title>Ose 1.0</title> - - <section><title>Improvements and New Features</title> - <list> - <item> - <p> - Erlang/OTP has been ported to the realtime operating - system OSE. The port supports both smp and non-smp - emulator. For details around the port and how to started - see the User's Guide in the <seealso - marker="ose:ose_intro">ose</seealso> application. </p> - <p> - Note that not all parts of Erlang/OTP has been ported. </p> - <p> - Notable things that work are: non-smp and smp emulators, - OSE signal interaction, crypto, asn1, run_erl/to_erl, - tcp, epmd, distribution and most if not all non-os - specific functionality of Erlang.</p> - <p> - Notable things that does not work are: udp/sctp, os_mon, - erl_interface, binding of schedulers.</p> - <p> - Own Id: OTP-11334</p> - </item> - </list> - </section> - -</section> - -</chapter> diff --git a/lib/ose/doc/src/ose_app.xml b/lib/ose/doc/src/ose_app.xml deleted file mode 100644 index d555f0ec4f..0000000000 --- a/lib/ose/doc/src/ose_app.xml +++ /dev/null @@ -1,38 +0,0 @@ -<?xml version="1.0" encoding="utf-8" ?> -<!DOCTYPE appref SYSTEM "appref.dtd"> - -<appref> - <header> - <copyright> - <year>2014</year><year>2014</year> - <holder>Ericsson AB. All Rights Reserved.</holder> - </copyright> - <legalnotice> - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - - </legalnotice> - - <title>Enea OSE</title> - <prepared></prepared> - <docno></docno> - <date></date> - <rev></rev> - </header> - <app>ose</app> - <appsummary>The OSE Application</appsummary> - <description> - <p>The OSE application contains modules and documentation that only - applies when running Erlang/OTP on Enea OSE.</p> - </description> - -</appref> diff --git a/lib/ose/doc/src/ose_erl_driver.xml b/lib/ose/doc/src/ose_erl_driver.xml deleted file mode 100644 index b804c29d2d..0000000000 --- a/lib/ose/doc/src/ose_erl_driver.xml +++ /dev/null @@ -1,111 +0,0 @@ -<?xml version="1.0" encoding="utf-8" ?> -<!DOCTYPE cref SYSTEM "cref.dtd"> - -<cref> - <header> - <copyright> - <year>2013</year><year>2014</year> - <holder>Ericsson AB. All Rights Reserved.</holder> - </copyright> - <legalnotice> - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - - </legalnotice> - - <title>erl_driver for Enea OSE</title> - <prepared>Lukas Larsson</prepared> - <docno></docno> - <date>2014-01-08</date> - <rev>A</rev> - <file>ose_erl_driver.xml</file> - </header> - <lib>ose_erl_driver</lib> - <libsummary>Linked-in drivers in Enea OSE</libsummary> - <description> - <p>Writing Linked-in drivers that also work on Enea OSE is very similar for - how you would do it for Unix. The difference from Unix is that - driver_select, ready_input and ready_output all work with signals - instead of file descriptors. This means that the driver_select is - used to specify which type of signal should trigger calls to - ready_input/ready_output. The functions described below are available - to driver programmers on Enea OSE to facilitate this. - </p> - </description> - <section> - <title>DATA TYPES</title> - - <taglist> - <tag><marker id="union_SIGNAL"/>union SIGNAL</tag> - <item>See the Enea OSE SPI documentation for a description.</item> - <tag><marker id="SIGSELECT"/>SIGSELECT</tag> - <item>See the Enea OSE SPI documentation for a description.</item> - <tag><marker id="ErlDrvEvent"/>ErlDrvEvent</tag> - <item>The <c>ErlDrvEvent</c> is a handle to a signal number and id combination. It is passed to <seealso marker="erts:erl_driver#driver_select">driver_select(3)</seealso>.</item> - <tag><marker id="ErlDrvOseEventId"/>ErlDrvOseEventId</tag> - <item>This is the id used to associate a specific signal to a - certain driver instance. </item> - </taglist> - </section> - <funcs> - <func> - <name><ret>union SIGNAL *</ret><nametext>erl_drv_ose_get_signal(ErlDrvEvent drv_event)</nametext></name> - <desc> - <marker id="erl_drv_ose_get_signal"></marker> - <p>Fetch the next signal associated with <c>drv_event</c>. - Signals will be returned in the order which they were received and - when no more signals are available <c>NULL</c> will be returned. - Use this function in the ready_input/ready_output callbacks - to get signals.</p> - </desc> - </func> - <func> - <name><ret>ErlDrvEvent</ret><nametext>erl_drv_ose_event_alloc(SIGSELECT signo, ErlDrvOseEventId id, ErlDrvOseEventId (*resolve_signal)(union SIGNAL* sig), void *extra)</nametext></name> - <desc> - <marker id="erl_drv_ose_event_alloc"></marker> - <p>Create a new <c>ErlDrvEvent</c> associated with <c>signo</c>, - <c>id</c> and uses the <c>resolve_signal</c> function to extract - the <c>id</c> from a signal with <c>signo</c>. The <c>extra</c> - parameter can be used for additional data. See - <seealso marker="ose_signals_chapter#driver"> - Signals in a Linked-in driver</seealso> in the OSE User's Guide. - </p> - </desc> - </func> - <func> - <name><ret>void</ret><nametext>erl_drv_ose_event_free(ErlDrvEvent drv_event)</nametext></name> - <desc> - <marker id="erl_drv_ose_event_free"></marker> - <p>Free a <c>ErlDrvEvent</c>. This should always be done in the - <seealso marker="erts:driver_entry#stop_select">stop_select</seealso> - callback when the event is no longer being used.</p> - </desc> - </func> - <func> - <name><ret>void</ret><nametext>erl_drv_ose_event_fetch(ErlDrvEvent drv_event, SIGSELECT *signo, ErlDrvOseEventId *id, void **extra)</nametext></name> - <desc> - <marker id="erl_drv_ose_event_fetch"></marker> - <p>Write the signal number, id and any extra data associated with <c>drv_event</c> - into <c>*signo</c> and <c>*id</c> respectively. <c>NULL</c> can be - also passed as <c>signo</c> or <c>id</c> in order to ignore that field. - </p> - </desc> - </func> - </funcs> - <section> - <title>SEE ALSO</title> - <p> - <seealso marker="erts:driver_entry">driver_entry(3)</seealso>, - <seealso marker="erts:erl_driver">erl_driver(3)</seealso> - </p> - </section> -</cref> diff --git a/lib/ose/doc/src/ose_intro.xml b/lib/ose/doc/src/ose_intro.xml deleted file mode 100644 index 982516c8bd..0000000000 --- a/lib/ose/doc/src/ose_intro.xml +++ /dev/null @@ -1,154 +0,0 @@ -<?xml version="1.0" encoding="utf-8" ?> -<!DOCTYPE chapter SYSTEM "chapter.dtd"> - -<chapter> - <header> - <copyright> - <year>2013</year><year>2014</year> - <holder>Ericsson AB. All Rights Reserved.</holder> - </copyright> - <legalnotice> - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - - </legalnotice> - - <title>Introduction</title> - <prepared>Lukas Larsson</prepared> - <docno></docno> - <date>2014-01-08</date> - <rev>A</rev> - <file>ose_intro.xml</file> - </header> - - <section> - <title>Features</title> - </section> - - <section> - <title>Starting Erlang/OTP</title> - <p> - Starting Erlang/OTP on OSE is not as simple as on Unix/Windows (yet). - First of all you have to explicitly use the beam (or beam.smp) executables - found in erts-X.Y.Z/bin as the load module that you run. This in turn - means that you have to supply the raw beam arguments to the emulator - when starting. Fortunately <c>erl</c> on Unix/Windows has a - undocumented flag called <c>-emu_args_exit</c> that can be used to - figure out what the arguments to beam look like. For example:</p> - <code># erl +Mut false +A 10 +S 4:4 +Muycs256 +P 2096 +Q 2096 -emu_args_exit --Mut -false --A -10 --S -4:4 --Muycs256 --P -2096 --Q -2096 --- --root -/usr/local/lib/erlang --progname -erl --- --home -/home/erlang ---</code> - <p> - The arguments are printed on separate lines to make it possible to know - what has to be quoted with ". Each line is one quotable unit. - So taking the arguments above you can supply them to pm_create or - just execute directly on the command line. For example:</p> - <code>rtose@acp3400> pm_install erlang /mst/erlang/erts-6.0/bin/beam.smp -rtose@acp3400> pm_create -c ARGV="-Mut false -A 10 -S 4:4 -Muycs256 -P 2096 -Q 2099 -- -root /mst/erlang -progname erl -- -home /mst/erlang --" erlang -pid: 0x110059 -rtose@acp3400> pm_start 0x110059</code> - <p> - Also note that since we are running erl to figure out the arguments on a - separate machine the paths have to be updated. In the example above - <c>/usr/local/lib/erlang</c> was replaced by <c>/mst/erlang/</c>. The - goal is to in future releases not have to do the special argument handling - but for now (OTP 17.0) you have to do it. - </p> - <note> - Because of a limitation in the way the OSE handles stdio when starting - load modules using pm_install/create the Erlang shell only reads every - other command from stdin. However if you start Erlang using run_erl - you do not have this problem. So it is highly recommended that you - start Erlang using run_erl. - </note> - </section> - - <section> - <title>run_erl and to_erl</title> - <p> - In OSE run_erl and to_erl are combined into a single load module called - run_erl_lm. Installing and starting the load module will add two new - shell commands called run_erl and to_erl. They work in exactly the same - way as the unix variants of run_erl and to_erl, except that the read - and write pipes have to be placed under the /pipe vm. One additional - option also exists to run_erl on ose: - <taglist> - <tag><c>-block Name</c></tag> - <item>The name of the install handle and block that will be created/used by - installing and exectuting the first part of the command. If nothing - if given the basename of the load module will be used for this value. - Example: - <code>pm_install erlang /path/to/erlang/vm/beam.smp -run_erl -daemon -block erlang /pipe/ /mst/erlang_logs/ "beam.smp -A 1 -- -root /mst/erlang -- -home /mst --"</code> - </item> - </taglist> - The same argument munching as when starting Erlang/OTP without run_erl - has to be done. If <c>-daemon</c> is given then all error printouts - are sent to the ramlog. - See also - <seealso marker="erts:run_erl">run_erl</seealso> for more details. - </p> - <p> - Below is an example of how to get started with <c>run_erl_lm</c>. - <code>rtose@acp3400> pm_install run_erl_lm /mst/erlang/erts-6.0/bin/run_erl_lm -rtose@acp3400> pm_create run_erl_lm -pid: 0x1c005d -rtose@acp3400> pm_start 0x1c005d -rtose@acp3400> mkdir /mst/erlang_log -rtose@acp3400> run_erl -daemon /pipe/ /mst/erlang_log/ "/mst/erlang/erts-6.0/bin/beam.smp -A 1 -- -root /mst/erlang -- -home /mst --" -rtose@acp3400> to_erl -Attaching to /pipe/erlang.pipe.1 (^C to exit) -os:type(). -{ose,release} -2> -'to_erl' terminated.</code> - Note that Ctrl-C is used instead of Ctrl-D to exit the to_erl shell. - </p> - </section> - - <section> - <title>epmd</title> - <p> - In OSE epmd will not be started automatically so if you want to use - Erlang distribution you have to manually start epmd. - </p> - </section> - - <section> - <title>VM Process Priorities</title> - <p> - It is possible to set the priorities you want for the OSE processes that - thr emulator creates in the lmconf. An example of how to do it can be - found in the default lmconf file in - $ERL_TOP/erts/emulator/sys/ose/beam.lmconf. - </p> - </section> - -</chapter> diff --git a/lib/ose/doc/src/ose_signals_chapter.xml b/lib/ose/doc/src/ose_signals_chapter.xml deleted file mode 100644 index bcf2259577..0000000000 --- a/lib/ose/doc/src/ose_signals_chapter.xml +++ /dev/null @@ -1,240 +0,0 @@ -<?xml version="1.0" encoding="utf-8" ?> -<!DOCTYPE chapter SYSTEM "chapter.dtd"> - -<chapter> - <header> - <copyright> - <year>2013</year><year>2014</year> - <holder>Ericsson AB. All Rights Reserved.</holder> - </copyright> - <legalnotice> - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - - </legalnotice> - - <title>Interacting with Enea OSE</title> - <prepared>Lukas Larsson</prepared> - <docno></docno> - <date>2014-01-08</date> - <rev>A</rev> - <file>ose_signals_chapter.xml</file> - </header> - - <marker id="introduction"></marker> - <section> - <title>Introduction</title> - <p>The main way which programs on Enea OSE interact is through the - usage of message passing, much the same way as Erlang processes - communicate. There are two ways in which an Erlang programmer can - interact with the signals sent from other Enea OSE processes; either - through the provided <c>ose</c> module, or by writing a custom linked-in - driver. This User's Guide describes and provides examples for both - approaches. - </p> - </section> - - <marker id="erlang"></marker> - <section> - <title>Signals in Erlang</title> - <p>Erlang/OTP on OSE provides a erlang module called - <seealso marker="ose:ose">ose</seealso> that can be used to interact - with other OSE processes using message passing. The api in the module - is very similar to the native OSE api, so for details of how the - functions work please refer to the official OSE documenation. Below - is an example usage of the API. - </p> - <code>1> P1 = ose:open("p1"). -#Port>0.344> -2> ose:hunt(P1,"p2"). -{#Port>0.344>,1} -3> P2 = ose:open("p2"). -#Port>0.355> -4> flush(). -Shell got {mailbox_up,#Port>0.344>,{#Port>0.344>,1},852189} -ok -5> ose:listen(P1,[1234]). -ok -6> ose:send(P2,ose:get_id(P1),1234,>>"hello">>). -ok -7> flush(). -Shell got {message,#Port>0.344>,{852189,1245316,1234,>>"hello">>}} -ok</code> - </section> - - <marker id="driver"></marker> - <section> - <title>Signals in a Linked-in driver</title> - <p> - Writing Linked-in drivers for OSE is very similar to how it is done - for Unix/Windows. It is only the way in which the driver subscribes - and consumed external events that is different. In Unix (and Windows) - file descriptiors (and Event Objects) are used to select on. On OSE - we use signals to deliver the same functionality. There are two large - differences between a signal and an fd. - </p> - <p> - In OSE it is not possible for a signal number to be a unique identifier - for a resource in the same way as an fd is. For example; let's say we - implement a driver that does an asynchronous hunt that uses signal - number 1234 as the hunt_sig. If we want to be able to have multiple - hunt ports running at the same time we have to have someway of routing - the signal to the correct port. This is achieved by supplying a secondary - id that can be retrieved through the meta-data or payload of the signal, - e.g: - <code>ErlDrvEvent event = erl_drv_ose_event_alloc(1234,port,resolver);</code> - The event you get back from - <seealso marker="ose_erl_driver#erl_drv_ose_event_alloc"> - erl_drv_ose_event_alloc</seealso> can then be used by - <seealso marker="erts:erl_driver#driver_select">driver_select</seealso> - to subscribe to signals. The first argument is just the signal number - that we are interested in. The second is the id that we choose to use, - in this case the port id that we got in the - <seealso marker="erts:driver_entry#start">start</seealso> callback is - used. The third argument is a function pointer to a function that can - be used to figure out the id from a given signal. The fourth argument can - point to any additional data you might want to associate with the event. - There is a complete. You can examine the data contained in the event with - <seealso marker="ose_erl_driver#erl_drv_ose_event_fetch">erl_drv_ose_event_fetch</seealso> - , eg: - <code>erl_drv_ose_event_fetch(event, &signal, &port, (void **)&extra);</code> - example of what this could look like in - <seealso marker="#example">the next section</seealso>. - <note>It is very important to issue the driver_select call before - any of the signals you are interested in are sent. If driver_select - is called after the signal is sent, there is a high probability that it - will be lost.</note> - </p> - <p> - The other difference from unix is that in OSE the payload of the event - (i.e. the signal data) is already received when the ready_output/input - callbacks are called. This means that you access the data of a signal - by calling <seealso marker="ose_erl_driver#erl_drv_ose_get_signal"> - erl_drv_ose_get_signal</seealso>. Additionally multiple signals might be - associated with the event, so you should call - <seealso marker="ose_erl_driver#erl_drv_ose_get_signal"> - erl_drv_ose_get_signal</seealso> until <c>NULL</c> is returned. - </p> - </section> - - <marker id="example"></marker> - <section> - <title>Example Linked-in driver</title> -<code>#include "erl_driver.h" -#include "ose.h" - -struct huntsig { - SIGSELECT signo; - ErlDrvPort port; -}; - -union SIGNAL { - SIGSELECT signo; - struct huntsig; -} - -/* Here we have to get the id from the signal. In this case we use the - port id since we have control over the data structure of the signal. - It is however possible to use anything in here. The only restriction - is that the same id has to be used for all signals of the same number.*/ -ErlDrvOseEventId resolver(union SIGNAL *sig) { - return (ErlDrvOseEventId)sig->huntsig.port; -} - -static int drv_init(void) { return 0; }; - -static ErlDrvData drv_start(ErlDrvPort port, char *command) { - return (ErlDrvData)port; -} - -static ErlDrvSSizeT control(ErlDrvData driver_data, unsigned int cmd, - char *buf, ErlDrvSizeT len, - char **rbuf, ErlDrvSizeT rlen) { - ErlDrvPort port = (ErlDrvPort)driver_data; - - /* An example of extra data to associate with the event */ - char *extra_data = driver_alloc(80); - snprintf("extra_data, "Event, sig_no: 1234, and port: %d", port); - - /* Create a new event to select on */ - ErlDrvOseEvent evt = erl_drv_ose_event_alloc(1234,port,resolver, extra_data); - - /* Make sure to do the select call _BEFORE_ the signal arrives. - The signal might get lost if the hunt call is done before the - select. */ - driver_select(port,evt,ERL_DRV_READ|ERL_DRV_USE,1); - - union SIGNAL *sig = alloc(sizeof(union SIGNAL),1234); - sig->huntsig.port = port; - hunt("testprocess",0,NULL,&sig); - return 0; -} - -static void ready_input(ErlDrvData driver_data, ErlDrvEvent evt) { - char *extra_data; - /* Get the first signal payload from the event */ - union SIGNAL *sig = erl_drv_ose_get_signal(evt); - ErlDrvPort port = (ErlDrvPort)driver_data; - while (sig != NULL) { - if (sig->signo == 1234) { - /* Print out the string we added as the extra parameter */ - erl_drv_ose_event_fetch(evt, NULL, NULL, (void **)&extra_data); - printf("We've received: %s\n", extra_data); - - /* If it is our signal we send a message with the sender of the signal - to the controlling erlang process */ - ErlDrvTermData reply[] = { ERL_DRV_UINT, (ErlDrvUInt)sender(&sig) }; - erl_drv_send_term(port,reply,sizeof(reply) / sizeof(reply[0])); - } - - /* Cleanup the signal and deselect on the event. - Note that the event itself has to be free'd in the stop_select - callback. */ - free_buf(&sig); - driver_select(port,evt,ERL_DRV_READ|ERL_DRV_USE,0); - - /* There could be more than one signal waiting in this event, so - we have to loop until sig == NULL */ - sig = erl_drv_ose_get_signal(evt); - } -} - -static void stop_select(ErlDrvEvent event, void *reserved) -{ - /* Free the extra_data */ - erl_drv_ose_event_fetch(evt, NULL, NULL, (void **)&extra_data); - driver_free(extra_data); - - /* Free the event itself */ - erl_drv_ose_event_free(event); -} - -/** - * Setup the driver entry for the Erlang runtime - **/ -ErlDrvEntry ose_signal_driver_entry = { - .init = drv_init, - .start = drv_start, - .stop = drv_stop, - .ready_input = ready_input, - .driver_name = DRIVER_NAME, - .control = control, - .extended_marker = ERL_DRV_EXTENDED_MARKER, - .major_version = ERL_DRV_EXTENDED_MAJOR_VERSION, - .minor_version = ERL_DRV_EXTENDED_MINOR_VERSION, - .driver_flags = ERL_DRV_FLAG_USE_PORT_LOCKING, - .stop_select = stop_select -}; -</code> - </section> - -</chapter> diff --git a/lib/ose/doc/src/part.xml b/lib/ose/doc/src/part.xml deleted file mode 100644 index 0c9ebd16c0..0000000000 --- a/lib/ose/doc/src/part.xml +++ /dev/null @@ -1,39 +0,0 @@ -<?xml version="1.0" encoding="utf-8" ?> -<!DOCTYPE part SYSTEM "part.dtd"> - -<part xmlns:xi="http://www.w3.org/2001/XInclude"> - <header> - <copyright> - <year>2014</year> - <year>2014</year> - <holder>Ericsson AB, All Rights Reserved</holder> - </copyright> - <legalnotice> - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - - The Initial Developer of the Original Code is Ericsson AB. - </legalnotice> - - <title>OSE User's Guide</title> - <prepared>Lukas Larsson</prepared> - <docno></docno> - <date>2014-01-08</date> - <rev>1.0</rev> - <file>part.xml</file> - </header> - <description> - <p><em>OSE</em>.</p> - </description> - <xi:include href="ose_intro.xml"/> - <xi:include href="ose_signals_chapter.xml"/> -</part> diff --git a/lib/ose/doc/src/ref_man.xml b/lib/ose/doc/src/ref_man.xml deleted file mode 100644 index 964e5ab8ff..0000000000 --- a/lib/ose/doc/src/ref_man.xml +++ /dev/null @@ -1,40 +0,0 @@ -<?xml version="1.0" encoding="utf-8" ?> -<!DOCTYPE application SYSTEM "application.dtd"> - -<application xmlns:xi="http://www.w3.org/2001/XInclude"> - <header> - <copyright> - <year>2014</year><year>2014</year> - <holder>Ericsson AB. All Rights Reserved.</holder> - </copyright> - <legalnotice> - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - - </legalnotice> - - <title>OSE Reference Manual</title> - <prepared>Lukas Larsson</prepared> - <docno></docno> - <date>2014-01-08</date> - <rev>1.0</rev> - <file>ref_man.xml</file> - </header> - <description> - <p>The Standard Erlang Libraries application, <em>STDLIB</em>, - contains modules for manipulating lists, strings and files etc.</p> - <br></br> - </description> - <xi:include href="ose_app.xml"/> - <xi:include href="ose.xml"/> - <xi:include href="ose_erl_driver.xml"/> -</application> diff --git a/lib/ose/ebin/.gitignore b/lib/ose/ebin/.gitignore deleted file mode 100644 index e69de29bb2..0000000000 --- a/lib/ose/ebin/.gitignore +++ /dev/null diff --git a/lib/ose/include/.gitignore b/lib/ose/include/.gitignore deleted file mode 100644 index e69de29bb2..0000000000 --- a/lib/ose/include/.gitignore +++ /dev/null diff --git a/lib/ose/info b/lib/ose/info deleted file mode 100644 index 85c07dbe82..0000000000 --- a/lib/ose/info +++ /dev/null @@ -1,2 +0,0 @@ -group: misc Miscellaneous Applications -short: Description of Enea OSE specific functionality diff --git a/lib/ose/src/Makefile b/lib/ose/src/Makefile deleted file mode 100644 index a89e9392e9..0000000000 --- a/lib/ose/src/Makefile +++ /dev/null @@ -1,107 +0,0 @@ -# -# %CopyrightBegin% -# -# Copyright Ericsson AB 1996-2013. All Rights Reserved. -# -# Licensed under the Apache License, Version 2.0 (the "License"); -# you may not use this file except in compliance with the License. -# You may obtain a copy of the License at -# -# http://www.apache.org/licenses/LICENSE-2.0 -# -# Unless required by applicable law or agreed to in writing, software -# distributed under the License is distributed on an "AS IS" BASIS, -# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -# See the License for the specific language governing permissions and -# limitations under the License. -# -# %CopyrightEnd% -# - -include $(ERL_TOP)/make/target.mk -include $(ERL_TOP)/make/$(TARGET)/otp.mk - -# ---------------------------------------------------- -# Application version -# ---------------------------------------------------- -include ../vsn.mk -VSN=$(OSE_VSN) - -# ---------------------------------------------------- -# Release directory specification -# ---------------------------------------------------- -RELSYSDIR = $(RELEASE_PATH)/lib/ose-$(VSN) - -# ---------------------------------------------------- -# Target Specs -# ---------------------------------------------------- -MODULES= \ - ose - -HRL_FILES= - -INTERNAL_HRL_FILES= - -ERL_FILES= $(MODULES:%=%.erl) - -TARGET_FILES= $(MODULES:%=$(EBIN)/%.$(EMULATOR)) $(APP_TARGET) $(APPUP_TARGET) - -APP_FILE= ose.app - -APP_SRC= $(APP_FILE).src -APP_TARGET= $(EBIN)/$(APP_FILE) - -APPUP_FILE= ose.appup - -APPUP_SRC= $(APPUP_FILE).src -APPUP_TARGET= $(EBIN)/$(APPUP_FILE) - -# ---------------------------------------------------- -# FLAGS -# ---------------------------------------------------- - -ifeq ($(NATIVE_LIBS_ENABLED),yes) -ERL_COMPILE_FLAGS += +native -endif -ERL_COMPILE_FLAGS += -I../include -I../../kernel/include -Werror - -# ---------------------------------------------------- -# Targets -# ---------------------------------------------------- - -debug opt: $(TARGET_FILES) - -clean: - rm -f $(TARGET_FILES) - rm -f core - rm -f erl_parse.erl - -docs: - -# ---------------------------------------------------- -# Special Build Targets -# ---------------------------------------------------- - -$(APP_TARGET): $(APP_SRC) ../vsn.mk - $(vsn_verbose)sed -e 's;%VSN%;$(VSN);' $< > $@ - -$(APPUP_TARGET): $(APPUP_SRC) ../vsn.mk - $(vsn_verbose)sed -e 's;%VSN%;$(VSN);' $< > $@ - -# ---------------------------------------------------- -# Release Target -# ---------------------------------------------------- -include $(ERL_TOP)/make/otp_release_targets.mk - -release_spec: opt - $(INSTALL_DIR) "$(RELSYSDIR)/src" - $(INSTALL_DATA) $(ERL_FILES) "$(RELSYSDIR)/src" - $(INSTALL_DIR) "$(RELSYSDIR)/include" - $(INSTALL_DIR) "$(RELSYSDIR)/ebin" - $(INSTALL_DATA) $(TARGET_FILES) "$(RELSYSDIR)/ebin" - -release_docs_spec: - -# ---------------------------------------------------- -# Dependencies -- alphabetically, please -# ---------------------------------------------------- diff --git a/lib/ose/src/ose.app.src b/lib/ose/src/ose.app.src deleted file mode 100644 index 036779eb16..0000000000 --- a/lib/ose/src/ose.app.src +++ /dev/null @@ -1,28 +0,0 @@ -%% This is an -*- erlang -*- file. -%% -%% %CopyrightBegin% -%% -%% Copyright Ericsson AB 1996-2011. All Rights Reserved. -%% -%% Licensed under the Apache License, Version 2.0 (the "License"); -%% you may not use this file except in compliance with the License. -%% You may obtain a copy of the License at -%% -%% http://www.apache.org/licenses/LICENSE-2.0 -%% -%% Unless required by applicable law or agreed to in writing, software -%% distributed under the License is distributed on an "AS IS" BASIS, -%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -%% See the License for the specific language governing permissions and -%% limitations under the License. -%% -%% %CopyrightEnd% -%% -{application, ose, - [{description, "Enea OSE specific modules"}, - {vsn, "%VSN%"}, - {modules, [ose]}, - {registered,[]}, - {applications, [stdlib,kernel]}, - {env, []}, - {runtime_dependencies, ["stdlib-2.0","erts-6.0"]}]}. diff --git a/lib/ose/src/ose.appup.src b/lib/ose/src/ose.appup.src deleted file mode 100644 index 28b6da3439..0000000000 --- a/lib/ose/src/ose.appup.src +++ /dev/null @@ -1,23 +0,0 @@ -%% -*- erlang -*- -%% %CopyrightBegin% -%% -%% Copyright Ericsson AB 1999-2013. All Rights Reserved. -%% -%% Licensed under the Apache License, Version 2.0 (the "License"); -%% you may not use this file except in compliance with the License. -%% You may obtain a copy of the License at -%% -%% http://www.apache.org/licenses/LICENSE-2.0 -%% -%% Unless required by applicable law or agreed to in writing, software -%% distributed under the License is distributed on an "AS IS" BASIS, -%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -%% See the License for the specific language governing permissions and -%% limitations under the License. -%% -%% %CopyrightEnd% -{"%VSN%", - [ - ], - [ - ]}. diff --git a/lib/ose/src/ose.erl b/lib/ose/src/ose.erl deleted file mode 100644 index 5534dba4d4..0000000000 --- a/lib/ose/src/ose.erl +++ /dev/null @@ -1,453 +0,0 @@ -%% -%% %CopyrightBegin% -%% -%% Copyright Ericsson AB 2013. All Rights Reserved. -%% -%% Licensed under the Apache License, Version 2.0 (the "License"); -%% you may not use this file except in compliance with the License. -%% You may obtain a copy of the License at -%% -%% http://www.apache.org/licenses/LICENSE-2.0 -%% -%% Unless required by applicable law or agreed to in writing, software -%% distributed under the License is distributed on an "AS IS" BASIS, -%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -%% See the License for the specific language governing permissions and -%% limitations under the License. -%% -%% %CopyrightEnd% -%% -%% @doc Interface module for OSE messaging and process monitoring from Erlang -%% -%% For each mailbox created through {@link open/1} a OSE phantom process with -%% that name is started. Since phantom processes are used the memory footprint -%% of each mailbox is quite small. -%% -%% To receive messages you first have to subscribe to the specific message -%% numbers that you are interested in with {@link listen/2}. The messages -%% will be sent to the Erlang process that created the mailbox. -%% -%% @end -%% --module(ose). - -%%============================================================================== -%% Exported API -%%============================================================================== --export([open/1, - close/1, - get_id/1, - get_name/2, - hunt/2, - dehunt/2, - attach/2, - detach/2, - send/4, - send/5, - listen/2 - ]). - -%%============================================================================== -%% Types -%%============================================================================== --opaque mailbox() :: port(). -%% Mailbox handle. Implemented as an erlang port. - --opaque mailbox_id() :: integer(). -%% Mailbox ID, this is the same as the process id of an OSE process. -%% An integer. - --type message_number() :: 0..4294967295. -%% OSE Signal number - --opaque hunt_ref() :: {mailbox(),integer()}. -%% Reference from a hunt request. This term will be included -%% in a successful hunt response. - --opaque attach_ref() :: {mailbox(),integer()}. -%% Reference from an attach request. This term will be included -%% in the term returned when the attached mailbox disappears. - --export_type([mailbox_id/0, - message_number/0, - mailbox/0, - hunt_ref/0, - attach_ref/0]). - -%%============================================================================== -%% Defines -%%============================================================================== --define(DRIVER_NAME, "ose_signal_drv"). --define(GET_SPID, 1). --define(GET_NAME, 2). --define(HUNT, 100). --define(DEHUNT, 101). --define(ATTACH, 102). --define(DETACH, 103). --define(SEND, 104). --define(SEND_W_S, 105). --define(LISTEN, 106). --define(OPEN, 200). - --define(INT_32BIT(Int),(is_integer(Int) andalso (Int >= 0) andalso (Int < (1 bsl 32)))). - -%%============================================================================== -%% API functions -%%============================================================================== - -%%------------------------------------------------------------------------------ -%% @doc Create a mailbox with the given name and return a port that handles -%% the mailbox. -%% -%% An OSE phantom process with the given name will be created that will send any -%% messages sent through this mailbox. Any messages sent to the new OSE process -%% will automatically be converted to an Erlang message and sent to the Erlang -%% process that calls this function. See {@link listen/2} for details about the -%% format of the message sent. -%% -%% The caller gets linked to the created mailbox. -%% -%% raises: `badarg' | `system_limit' -%% -%% @see listen/2 -%% @end -%%------------------------------------------------------------------------------ --spec open(Name) -> Port when - Name :: iodata(), - Port :: mailbox(). -open(Name) -> - try open_port({spawn_driver,?DRIVER_NAME}, [binary]) of - Port -> - try port_command(Port,[?OPEN,Name]) of - true -> - receive - {ose_drv_reply,Port,{error,Error}} -> - close(Port), - erlang:error(Error,[Name]); - {ose_drv_reply,Port,ok} -> - Port - end - catch - error:badarg -> close(Port),erlang:error(badarg,[Name]) - end - catch - error:badarg -> erlang:error(badarg,[Name]) - end. - -%%------------------------------------------------------------------------------ -%% @doc Close a mailbox -%% -%% This kills the OSE phantom process associated with this mailbox. -%% -%% Will also consume any ``{'EXIT',Port,_}'' message from the port that comes -%% due to the port closing when the calling process traps exits. -%% -%% raises: `badarg' -%% @end -%%------------------------------------------------------------------------------ --spec close(Port) -> ok when - Port :: mailbox(). -close(Port) when is_port(Port) -> - %% Copied from prim_inet - case erlang:process_info(self(), trap_exit) of - {trap_exit,true} -> - link(Port), - catch erlang:port_close(Port), - receive {'EXIT',Port,_} -> ok end; - {trap_exit,false} -> - catch erlang:port_close(Port), - ok - end; -close(NotPort) -> - erlang:error(badarg,[NotPort]). - -%%------------------------------------------------------------------------------ -%% @doc Get the mailbox id for the given port. -%% -%% The mailbox id is the same as the OSE process id of the OSE phantom process -%% that this mailbox represents. -%% -%% raises: `badarg' -%% @end -%%------------------------------------------------------------------------------ --spec get_id(Port) -> Pid when - Port :: mailbox(), - Pid :: mailbox_id(). -get_id(Port) -> - try port_control(Port, ?GET_SPID, <<>>) of - <<Spid:32>> -> Spid - catch error:_Error -> - erlang:error(badarg,[Port]) - end. - -%%------------------------------------------------------------------------------ -%% @doc Get the mailbox name for the given mailbox id. -%% -%% The mailbox name is the name of the OSE process with process id Pid. -%% -%% This call will fail with badarg if the underlying system does not support -%% getting the name from a process id. -%% -%% raises: `badarg' -%% @end -%%------------------------------------------------------------------------------ --spec get_name(Port, Pid) -> Name | undefined when - Port :: mailbox(), - Pid :: mailbox_id(), - Name :: binary(). -get_name(Port, Pid) when ?INT_32BIT(Pid) -> - try port_control(Port, ?GET_NAME, <<Pid:32>>) of - [] -> undefined; - Res -> Res - catch error:_Error -> - erlang:error(badarg,[Port,Pid]) - end; -get_name(Port, Pid) -> - erlang:error(badarg,[Port,Pid]). - - -%%------------------------------------------------------------------------------ -%% @doc Hunt for OSE process by name. -%% -%% Will send `{mailbox_up, Port, Ref, MboxId}' -%% to the calling process when the OSE process becomes available. -%% -%% Returns a reference term that can be used to cancel the hunt -%% using {@link dehunt/2}. -%% -%% raises: `badarg' -%% -%% @end -%%------------------------------------------------------------------------------ --spec hunt(Port, HuntPath) -> Ref when - Port :: mailbox(), - HuntPath :: iodata(), - Ref :: hunt_ref(). -hunt(Port, HuntPath) -> - try port_command(Port, [?HUNT,HuntPath]) of - true -> - receive - {ose_drv_reply,Port,{error,Error}} -> - erlang:error(Error,[Port,HuntPath]); - {ose_drv_reply,Port,Ref} -> - Ref - end - catch error:_Error -> - erlang:error(badarg,[Port,HuntPath]) - end. - -%%------------------------------------------------------------------------------ -%% @doc Stop hunting for OSE process. -%% -%% If a message for this hunt has been sent but not received -%% by the calling process, it is removed from the message queue. -%% Note that this only works if the same process that did -%% the hunt does the dehunt. -%% -%% raises: `badarg' -%% -%% @see hunt/2 -%% @end -%%------------------------------------------------------------------------------ --spec dehunt(Port, Ref) -> ok when - Port :: mailbox(), - Ref :: hunt_ref(). -dehunt(Port, {Port,Ref}) when ?INT_32BIT(Ref) -> - try port_command(Port, <<?DEHUNT:8, Ref:32>>) of - true -> - receive - {ose_drv_reply,Port,{error,enoent}} -> - %% enoent could mean that it is in the message queue - receive - {mailbox_up, Port, {Port,Ref}, _} -> - ok - after 0 -> - ok - end; - {ose_drv_reply,Port,ok} -> - ok - end - catch error:_Error -> - erlang:error(badarg,[Port,{Port,Ref}]) - end; -dehunt(Port,Ref) -> - erlang:error(badarg,[Port,Ref]). - -%%------------------------------------------------------------------------------ -%% @doc Attach to an OSE process. -%% -%% Will send `{mailbox_down, Port, Ref, MboxId}' -%% to the calling process if the OSE process exits. -%% -%% Returns a reference that can be used to cancel the attachment -%% using {@link detach/2}. -%% -%% raises: `badarg' | `enomem' -%% -%% @end -%%------------------------------------------------------------------------------ --spec attach(Port,Pid) -> Ref when - Port :: mailbox(), - Pid :: mailbox_id(), - Ref :: attach_ref(). -attach(Port, Spid) when ?INT_32BIT(Spid) -> - try port_command(Port, <<?ATTACH:8, Spid:32>>) of - true -> - receive - {ose_drv_reply,Port,{error,Error}} -> - erlang:error(Error,[Port,Spid]); - {ose_drv_reply,Port,Ref} -> - Ref - end - catch error:_Error -> - erlang:error(badarg,[Port,Spid]) - end; -attach(Port,Spid) -> - erlang:error(badarg,[Port,Spid]). - - -%%------------------------------------------------------------------------------ -%% @doc Remove attachment to an OSE process. -%% -%% If a message for this monitor has been sent but not received -%% by the calling process, it is removed from the message queue. -%% Note that this only works of the same process -%% that did the attach does the detach. -%% -%% raises: `badarg' -%% -%% @see attach/2 -%% @end -%%------------------------------------------------------------------------------ --spec detach(Port,Ref) -> ok when - Port :: mailbox(), - Ref :: attach_ref(). -detach(Port, {Port,Ref} ) when ?INT_32BIT(Ref) -> - try port_command(Port, <<?DETACH:8, Ref:32>>) of - true -> - receive - {ose_drv_reply,Port,{error,enoent}} -> - %% enoent could mean that it is in the message queue - receive - {mailbox_down,Port,{Port,Ref},_} -> - ok - after 0 -> - ok - end; - {ose_drv_reply,Port,ok} -> - ok - end - catch error:_Error -> - erlang:error(badarg,[Port,{Port,Ref}]) - end; -detach(Port,Ref) -> - erlang:error(badarg,[Port,Ref]). - -%%------------------------------------------------------------------------------ -%% @doc Send an OSE message. -%% -%% The message is sent from the OSE process' own ID that is: `get_id(Port)'. -%% -%% raises: `badarg' -%% -%% @see send/5 -%% @end -%%------------------------------------------------------------------------------ --spec send(Port,Pid,SigNo,SigData) -> ok when - Port :: mailbox(), - Pid :: mailbox_id(), - SigNo :: message_number(), - SigData :: iodata(). -send(Port, Spid, SigNo, SigData) when ?INT_32BIT(Spid), ?INT_32BIT(SigNo) -> - try erlang:port_command(Port, [<<?SEND:8, Spid:32, SigNo:32>>, SigData]) of - true -> ok - catch error:_Error -> - erlang:error(badarg,[Port,Spid,SigNo,SigData]) - end; -send(Port,Spid,SigNo,SigData) -> - erlang:error(badarg,[Port,Spid,SigNo,SigData]). - - -%%------------------------------------------------------------------------------ -%% @doc Send an OSE message with different sender. -%% -%% As {@link send/4} but the sender will be `SenderPid'. -%% -%% raises: `badarg' -%% -%% @see send/4 -%% @end -%%------------------------------------------------------------------------------ --spec send(Port,Pid,SenderPid,SigNo,SigData) -> ok when - Port :: mailbox(), - Pid :: mailbox_id(), - SenderPid :: mailbox_id(), - SigNo :: message_number(), - SigData :: iodata(). -send(Port, Spid, SenderPid, SigNo, SigData) - when ?INT_32BIT(Spid), ?INT_32BIT(SenderPid), ?INT_32BIT(SigNo) -> - try erlang:port_command(Port, [<<?SEND_W_S:8, Spid:32, SenderPid:32, - SigNo:32>>, SigData]) of - true -> ok - catch error:_Error -> - erlang:error(badarg,[Port,Spid,SenderPid,SigNo,SigData]) - end; -send(Port,Spid,SenderPid,SigNo,SigData) -> - erlang:error(badarg,[Port,Spid,SenderPid,SigNo,SigData]). - -%%------------------------------------------------------------------------------ -%% @doc Start listening for specified OSE signal numbers. -%% -%% The mailbox will send `{message,Port,{FromMboxId,ToMboxId,MsgNo,MsgData}}' -%% to the process that created the mailbox when an OSE message with any -%% of the specified `SigNos' arrives. -%% -%% Repeated calls to listen will replace the current set of signal numbers to -%% listen to. i.e -%% -%% ```1>ose:listen(MsgB,[1234,12345]). -%% ok -%% 2> ose:listen(MsgB,[1234,123456]). -%% ok.''' -%% -%% The above will first listen for signals with numbers 1234 and 12345, and then -%% replace that with only listening to 1234 and 123456. -%% -%% With the current implementation it is not possible to listen to all signal -%% numbers. -%% -%% raises: `badarg' | `enomem' -%% -%% @end -%%------------------------------------------------------------------------------ --spec listen(Port, SigNos) -> ok when - Port :: mailbox(), - SigNos :: list(message_number()). -listen(Port, SigNos) when is_list(SigNos) -> - USSigNos = lists:usort(SigNos), - BinSigNos = try - << <<SigNo:32>> || - SigNo <- USSigNos, - ?INT_32BIT(SigNo) orelse erlang:error(badarg) - >> - catch _:_ -> - erlang:error(badarg,[Port,SigNos]) - end, - try port_command(Port, [?LISTEN, BinSigNos]) of - true -> - receive - {ose_drv_reply,Port,{error,Error}} -> - erlang:error(Error,[Port,SigNos]); - {ose_drv_reply,Port,Else} -> - Else - end - catch error:_Error -> - erlang:error(badarg,[Port,SigNos]) - end; -listen(Port, SigNos) -> - erlang:error(badarg,[Port,SigNos]). - - -%%%============================================================================= -%%% Internal functions -%%%============================================================================= diff --git a/lib/ose/test/Makefile b/lib/ose/test/Makefile deleted file mode 100644 index 7e2080ba38..0000000000 --- a/lib/ose/test/Makefile +++ /dev/null @@ -1,67 +0,0 @@ -include $(ERL_TOP)/make/target.mk -include $(ERL_TOP)/make/$(TARGET)/otp.mk - -# ---------------------------------------------------- -# Target Specs -# ---------------------------------------------------- - -MODULES= \ - ose_SUITE - -ERL_FILES= $(MODULES:%=%.erl) - -TARGET_FILES= $(MODULES:%=$(EBIN)/%.$(EMULATOR)) - -INSTALL_PROGS= $(TARGET_FILES) - -# ---------------------------------------------------- -# Release directory specification -# ---------------------------------------------------- -RELSYSDIR = $(RELEASE_PATH)/ose_test - -# ---------------------------------------------------- -# FLAGS -# ---------------------------------------------------- - -ERL_MAKE_FLAGS += -ERL_COMPILE_FLAGS += -I$(ERL_TOP)/lib/test_server/include \ - -I$(ERL_TOP)/lib/kernel/include - -EBIN = . - -EMAKEFILE=Emakefile -COVERFILE=ose.cover - -# ---------------------------------------------------- -# Targets -# ---------------------------------------------------- - -make_emakefile: - $(ERL_TOP)/make/make_emakefile $(ERL_COMPILE_FLAGS) -o$(EBIN) $(MODULES) \ - > $(EMAKEFILE) - -tests debug opt: make_emakefile - erl $(ERL_MAKE_FLAGS) -make - -clean: - rm -f $(EMAKEFILE) - rm -f $(TARGET_FILES) - rm -f core - -docs: - -# ---------------------------------------------------- -# Release Target -# ---------------------------------------------------- -include $(ERL_TOP)/make/otp_release_targets.mk - -release_spec: opt - -release_tests_spec: make_emakefile - $(INSTALL_DIR) "$(RELSYSDIR)" - $(INSTALL_DATA) ose.spec $(EMAKEFILE) \ - $(ERL_FILES) $(COVERFILE) "$(RELSYSDIR)" - chmod -R u+w "$(RELSYSDIR)" - @tar cf - *_SUITE_data | (cd "$(RELSYSDIR)"; tar xf -) - -release_docs_spec: diff --git a/lib/ose/test/ose.cover b/lib/ose/test/ose.cover deleted file mode 100644 index 7b846cfaf6..0000000000 --- a/lib/ose/test/ose.cover +++ /dev/null @@ -1,2 +0,0 @@ -%% -*- erlang -*- -{incl_app,ose,details}. diff --git a/lib/ose/test/ose.spec b/lib/ose/test/ose.spec deleted file mode 100644 index c897e8cd16..0000000000 --- a/lib/ose/test/ose.spec +++ /dev/null @@ -1 +0,0 @@ -{suites,"../ose_test",all}. diff --git a/lib/ose/test/ose_SUITE.erl b/lib/ose/test/ose_SUITE.erl deleted file mode 100644 index 31d950bd03..0000000000 --- a/lib/ose/test/ose_SUITE.erl +++ /dev/null @@ -1,766 +0,0 @@ -%% -%% %CopyrightBegin% -%% -%% Copyright Ericsson AB 1998-2013. All Rights Reserved. -%% -%% Licensed under the Apache License, Version 2.0 (the "License"); -%% you may not use this file except in compliance with the License. -%% You may obtain a copy of the License at -%% -%% http://www.apache.org/licenses/LICENSE-2.0 -%% -%% Unless required by applicable law or agreed to in writing, software -%% distributed under the License is distributed on an "AS IS" BASIS, -%% WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -%% See the License for the specific language governing permissions and -%% limitations under the License. -%% -%% %CopyrightEnd% -%% --module(ose_SUITE). - -%-compile(export_all). - --export([all/0, suite/0,groups/0,init_per_suite/1, end_per_suite/1, - init_per_group/2,end_per_group/2,init_per_testcase/2, - end_per_testcase/2]). --export([ - basic/1,stress/1,multi_msg_numbers/1,multi_mailboxes/1, - hunt/1,multi_hunt/1,dehunt/1,multi_dehunt/1, - attach/1,multi_attach/1,detach/1,multi_detach/1, - open_errors/1,close_errors/1,get_id_errors/1,get_name_errors/1, - hunt_errors/1,dehunt_errors/1,attach_errors/1,detach_errors/1, - send_errors/1,send_w_s_errors/1,listen_errors/1 - ]). - --define(INTERFACE,ose). - - -init_per_testcase(_Func, Config) -> - Config. -end_per_testcase(_Func, _Config) -> - ok. - -suite() -> [{timeout,{30,seconds}}]. - -all() -> - [ - basic,stress,multi_msg_numbers,multi_mailboxes, - hunt,multi_hunt,dehunt,multi_dehunt, - attach,multi_attach,detach,multi_detach, - - open_errors,close_errors,get_id_errors,get_name_errors, - hunt_errors,dehunt_errors,attach_errors,detach_errors, - send_errors,send_w_s_errors,listen_errors - ]. - -groups() -> - []. - -init_per_suite(Config) -> - case os:type() of - {ose,_} -> - Config; - _Else -> - {skip,"Only run on OSE"} - end. - -end_per_suite(_Config) -> - ok. - -init_per_group(_GroupName, Config) -> - Config. - -end_per_group(_GroupName, Config) -> - Config. - -basic(_Config) -> - - [P1,P2] = multi_open(2,[42]), - P1Id = ?INTERFACE:get_id(P1), - P2Id = ?INTERFACE:get_id(P2), - - ok = ?INTERFACE:send(P2,P1Id,42,<<"ping">>), - receive - {message,P1,V1} -> - {P2Id,P1Id,42,<<"ping">>} = V1, - ?INTERFACE:send(P1,P2Id,42,<<"pong">>); - Else1 -> - ct:fail({got_wrong_message,Else1}) - end, - - receive - {message,P2,V2} -> - {P1Id,P2Id,42,<<"pong">>} = V2; - Else2 -> - ct:fail({got_wrong_message,Else2}) - end, - - ?INTERFACE:close(P1), - ?INTERFACE:close(P2). - -%% Send 1000 messages and see if we can cope and that msg order is preserved -stress(_Config) -> - - Iterations = 1000, - - [P1,P2] = multi_open(2,[42]), - P1Id = ?INTERFACE:get_id(P1), - P2Id = ?INTERFACE:get_id(P2), - - spawn(fun() -> - n(fun(N) -> - Msg = [<<"ping">>|integer_to_list(N)], - ?INTERFACE:send(P2,P1Id,42,Msg) - end,Iterations) - end), - timer:sleep(100), - n(fun(N) -> - receive - {message,P1,Value} -> - Int = integer_to_binary(N), - {P2Id,P1Id,42,<<"ping",Int/binary>>} = Value, - ok; - Else -> - ct:fail({got_wrong_message,Else}) - end - end,Iterations), - - ?INTERFACE:close(P1), - ?INTERFACE:close(P2). - -%% Listen to 1000 different message numbers and send some random messages -multi_msg_numbers(_Config) -> - - Iterations = 100, - - [P1,P2] = multi_open(2,lists:seq(2000,3000)), - P1Id = ?INTERFACE:get_id(P1), - - n(fun(_) -> - Num = random:uniform(1000)+2000, - ?INTERFACE:send(P2,P1Id,Num,<<"ping",(integer_to_binary(Num))/binary>>) - end,Iterations), - - n(fun(_) -> - receive - {message,P1,{_,_,Id,<<"ping",Num/binary>>}} when Id > 2000; - Id =< 3000 -> - Id = binary_to_integer(Num), - ok; - Else -> - ct:fail({got_wrong_message,Else}) - end - end,Iterations), - - ?INTERFACE:close(P1), - ?INTERFACE:close(P2). - - -%% Create 100 mailboxes and send messages to them -multi_mailboxes(_Config) -> - - Mailboxes = 100, - - [P1|MBs] = multi_open(Mailboxes,[42]), - - [?INTERFACE:send(P1,?INTERFACE:get_id(P),42,[<<"ping">>,?INTERFACE:get_name(P,?INTERFACE:get_id(P))]) || P <- MBs], - - [receive - {message,P,Value} -> - Name = ?INTERFACE:get_name(P,?INTERFACE:get_id(P)), - {_,_,42,<<"ping",Name/binary>>} = Value, - ok - end || P <- MBs], - - [?INTERFACE:close(P) || P <- [P1|MBs]], - ok. - -hunt(_Config) -> - [P1,P2] = multi_open(2,[]), - - Ref = ?INTERFACE:hunt(P1,"p2"), - receive - {mailbox_up,P1,Ref,Pid} -> - Pid = ?INTERFACE:get_id(P2), - ?INTERFACE:close(P1), - ?INTERFACE:close(P2); - Else -> - ct:fail({got_wrong_message,Else,Ref}) - end. - -multi_hunt(_Config) -> - - Iterations = 100, - - P = ?INTERFACE:open("p"), - - Refs = [?INTERFACE:hunt(P,"p"++integer_to_list(N))|| N <- lists:seq(1,Iterations)], - - Pids = [begin - Prt = ?INTERFACE:open("p"++integer_to_list(N)), - Pid = ?INTERFACE:get_id(Prt), - ?INTERFACE:close(Prt), - Pid - end || N <- lists:seq(1,Iterations)], - - [receive - {mailbox_up,P,Ref,Pid} -> - ok - after 10 -> - ct:fail({did_not_get,Pid,Ref}) - end || {Pid,Ref} <- lists:zip(Pids,Refs)], - ?INTERFACE:close(P). - - -dehunt(_Config) -> - [P1] = multi_open(1,[]), - Ref = ?INTERFACE:hunt(P1,"p2"), - receive - _Else -> ct:fail({got,_Else}) - after 1000 -> - ok - end, - P2 = ?INTERFACE:open("p2"), - - % Make sure any messages are sent - receive after 10 -> ok end, - - ok = ?INTERFACE:dehunt(P1,Ref), - - % Make sure no messages are received - receive - _Else2 -> ct:fail({got,_Else2}) - after 1000 -> - ?INTERFACE:close(P1), - ?INTERFACE:close(P2) - end. - -%%% -%%% This testcase basically: -%%% spawn 10 processes that in parallel -%%% adds some hunts for different OSE processes -%%% maybe create hunted OSE process -%%% dehunt half of the hunts -%%% create more hunts -%%% if not created create hunted OSE process -%%% veryify that all expected hunt messages are received -%%% verify that all processes exited correctly -%%% -%%% This complex test is done to make sure that the internal handling -%%% of dehunt works as expected. -%%% -multi_dehunt(_Config) -> - [P1] = multi_open(1,[]), - - Scenario = - fun(Iterations) -> - - Hunted = "p"++integer_to_list(Iterations), - %% Start a couple of hunts - Refs = [?INTERFACE:hunt(P1,Hunted) || _ <- lists:seq(1,Iterations)], - - %% We alternate if the process is opened before or after the dehunt - P2O = if Iterations rem 2 == 0 -> - ?INTERFACE:open(Hunted); - true -> - undefined - end, - - %% Remove half of them - {RemRefs,_} = lists:mapfoldl(fun(Ref,Acc) when Acc rem 2 == 0 -> - ok = ?INTERFACE:dehunt(P1,Ref), - {[],Acc+1}; - (Ref,Acc) -> - {Ref,Acc+1} - end,0,Refs), - - %% Add some new ones - NewRefs = [?INTERFACE:hunt(P1,Hunted) - || _ <- lists:seq(1,Iterations div 4)] - ++ lists:flatten(RemRefs), - - P2 = if P2O == undefined -> - ?INTERFACE:open(Hunted); - true -> - P2O - end, - P2Id = ?INTERFACE:get_id(P2), - - %% Receive all the expected ones - lists:foreach(fun(Ref) -> - receive - {mailbox_up,P1,Ref,P2Id} -> - ok - after 1000 -> - io:format("Flush: ~p~n",[flush()]), - io:format("~p~n",[{Iterations,{did_not_get, Ref}}]), - ok = Ref - end - end,NewRefs), - - %% Check that no other have arrived - receive - _Else -> - io:format("Flush: ~p~n",[flush()]), - io:format("~p~n",[{Iterations,{got, _Else}}]), - ok = _Else - after 100 -> - ok - end, - ?INTERFACE:close(P2) - end, - - Self = self(), - - n(fun(N) -> - spawn(fun() -> Self ! - Scenario(N*25) - end), - ok - end,10), - - n(fun(_N) -> - receive ok -> ok - after 60000 -> ct:fail(failed) - end - end,10), - ?INTERFACE:close(P1). - -attach(_Config) -> - [P1,P2] = multi_open(2,[]), - - P2Id = ?INTERFACE:get_id(P2), - Ref = ?INTERFACE:attach(P1,P2Id), - ?INTERFACE:close(P2), - receive - {mailbox_down,P1,Ref,P2Id} -> - ?INTERFACE:close(P1); - _Else -> - ct:fail({got,_Else, {P1,Ref,P2Id}}) - after 1000 -> - ct:fail({did_not_get,P1,Ref,P2Id}) - end. - -multi_attach(_Config) -> - - Iterations = 100, - - [P1|Pids] = multi_open(Iterations,[]), - - Refs = [{?INTERFACE:get_id(Pid),?INTERFACE:attach(P1,?INTERFACE:get_id(Pid))} || Pid <- Pids], - - [?INTERFACE:close(Pid) || Pid <- Pids], - - [receive - {mailbox_down,P1,Ref,Pid} -> - ok - after 10000 -> - ct:fail({did_not_get,Pid,Ref}) - end || {Pid,Ref} <- Refs], - ?INTERFACE:close(P1). - -detach(_Config) -> - [P1,P2] = multi_open(2,[]), - P2Id = ?INTERFACE:get_id(P2), - Ref = ?INTERFACE:attach(P1,P2Id), - receive - _Else -> ct:fail({got,_Else}) - after 100 -> - ok - end, - - ?INTERFACE:close(P2), - - % Make sure any messages are sent - receive after 10 -> ok end, - - ?INTERFACE:detach(P1,Ref), - - % Make sure no messages are received - receive - _Else2 -> ct:fail({got,_Else2}) - after 1000 -> - ?INTERFACE:close(P1) - end. - -%%% -%%% This testcase basically: -%%% spawn 10 processes that in parallel -%%% adds some attach for different OSE processes -%%% maybe close OSE process -%%% dehunt half of the hunts -%%% create more hunts -%%% if not closed close attached OSE process -%%% veryify that all expected attach messages are received -%%% verify that all processes exited correctly -%%% -%%% This complex test is done to make sure that the internal handling -%%% of dehunt works as expected. -%%% -multi_detach(_Config) -> - [P1] = multi_open(1,[]), - - Scenario = - fun(Iterations) -> - - Attached = ?INTERFACE:open("p"++integer_to_list(Iterations)), - AttachedId = ?INTERFACE:get_id(Attached), - %% Start a couple of attachs - Refs = [?INTERFACE:attach(P1,AttachedId) || _ <- lists:seq(1,Iterations)], - - %% We alternate if the process is closed before or after the detach - P2O = if Iterations rem 2 == 0 -> - ?INTERFACE:close(Attached); - true -> - undefined - end, - - %% Remove half of them - {RemRefs,_} = lists:mapfoldl(fun(Ref,Acc) when Acc rem 2 == 0 -> - ok = ?INTERFACE:detach(P1,Ref), - {[],Acc+1}; - (Ref,Acc) -> - {Ref,Acc+1} - end,0,Refs), - - %% Add some new ones - NewRefs = [?INTERFACE:attach(P1,AttachedId) - || _ <- lists:seq(1,Iterations div 4)] - ++ lists:flatten(RemRefs), - - if P2O == undefined -> - ?INTERFACE:close(Attached); - true -> - P2O - end, - - %% Receive all the expected ones - lists:foreach(fun(Ref) -> - receive - {mailbox_down,P1,Ref,AttachedId} -> - ok - after 1000 -> - io:format("Flush: ~p~n",[flush()]), - io:format("~p~n",[{Iterations,{did_not_get, Ref}}]), - ok = Ref - end - end,NewRefs), - - %% Check that no other have arrived - receive - _Else -> - io:format("Flush: ~p~n",[flush()]), - io:format("~p~n",[{Iterations,{got, _Else}}]), - ok = _Else - after 100 -> - ok - end - end, - - Self = self(), - - n(fun(N) -> - spawn(fun() -> Self ! - Scenario(N*5) - end), - ok - end,10), - - n(fun(_N) -> - receive ok -> ok - after 60000 -> ct:fail(failed) - end - end,10), - ?INTERFACE:close(P1). - - -open_errors(_Config) -> - {'EXIT',{badarg,[{?INTERFACE,open,[inval],_}|_]}} = - (catch ?INTERFACE:open(inval)), - {'EXIT',{badarg,[{?INTERFACE,open,[["p"|1]],_}|_]}} = - (catch ?INTERFACE:open(["p"|1])), - {'EXIT',{badarg,[{?INTERFACE,open,[["p",1234]],_}|_]}} = - (catch ?INTERFACE:open(["p",1234])), - - ok. - -close_errors(_Config) -> - {'EXIT',{badarg,[{?INTERFACE,close,[inval],_}|_]}} = - (catch ?INTERFACE:close(inval)), - - P1 = ?INTERFACE:open("p1"), - ok = ?INTERFACE:close(P1), - ok = ?INTERFACE:close(P1). - - -get_id_errors(_Config) -> - {'EXIT',{badarg,[{?INTERFACE,get_id,[inval],_}|_]}} = - (catch ?INTERFACE:get_id(inval)), - - P1 = ?INTERFACE:open("p1"), - ok = ?INTERFACE:close(P1), - {'EXIT',{badarg,[{?INTERFACE,get_id,[P1],_}|_]}} = - (catch ?INTERFACE:get_id(P1)), - - ok. - -get_name_errors(_Config) -> - P1 = ?INTERFACE:open("p1"), - {'EXIT',{badarg,[{?INTERFACE,get_name,[P1,inval],_}|_]}} = - (catch ?INTERFACE:get_name(P1,inval)), - - undefined = ?INTERFACE:get_name(P1,1234), - - P2 = ?INTERFACE:open("p2"), - P2Id = ?INTERFACE:get_id(P2), - ok = ?INTERFACE:close(P1), - {'EXIT',{badarg,[{?INTERFACE,get_name,[P1,P2Id],_}|_]}} = - (catch ?INTERFACE:get_name(P1,P2Id)), - ?INTERFACE:close(P2), - - P3 = ?INTERFACE:open([255]), - <<255>> = ?INTERFACE:get_name(P3, ?INTERFACE:get_id(P3)), - ?INTERFACE:close(P3), - - ok. - -hunt_errors(_Config) -> - - {'EXIT',{badarg,[{?INTERFACE,hunt,[inval,"hello"],_}|_]}} = - (catch ?INTERFACE:hunt(inval,"hello")), - - P1 = ?INTERFACE:open("p1"), - {'EXIT',{badarg,[{?INTERFACE,hunt,[P1,["hello",12345]],_}|_]}} = - (catch ?INTERFACE:hunt(P1,["hello",12345])), - - P2 = ?INTERFACE:open(<<255>>), - P2Pid = ?INTERFACE:get_id(P2), - Ref = ?INTERFACE:hunt(P1,[255]), - receive - {mailbox_up,P1,Ref,P2Pid} -> - ok; - Else -> - ct:fail({got,Else,{mailbox_up,P1,Ref,P2Pid}}) - after 150 -> - ct:fail({did_not_get,{mailbox_up,P1,Ref,P2Pid}}) - end, - - ok = ?INTERFACE:close(P1), - ok = ?INTERFACE:close(P2), - {'EXIT',{badarg,[{?INTERFACE,hunt,[P1,["hello"]],_}|_]}} = - (catch ?INTERFACE:hunt(P1,["hello"])), - - ok. - -dehunt_errors(_Config) -> - P1 = ?INTERFACE:open("p1"), - Ref = ?INTERFACE:hunt(P1,"p2"), - - {'EXIT',{badarg,[{?INTERFACE,dehunt,[inval,Ref],_}|_]}} = - (catch ?INTERFACE:dehunt(inval,Ref)), - - {'EXIT',{badarg,[{?INTERFACE,dehunt,[P1,inval],_}|_]}} = - (catch ?INTERFACE:dehunt(P1,inval)), - - ok = ?INTERFACE:dehunt(P1,Ref), - ok = ?INTERFACE:dehunt(P1,Ref), - - ok = ?INTERFACE:close(P1), - - {'EXIT',{badarg,[{?INTERFACE,dehunt,[P1,Ref],_}|_]}} = - (catch ?INTERFACE:dehunt(P1,Ref)), - - case ?INTERFACE of - ose -> ok; - _ -> - P2 = ?INTERFACE:open("p2"), - ok = ?INTERFACE:close(P2) - end, - - receive - Else -> ct:fail({got,Else}) - after 100 -> - ok - end. - -attach_errors(_Config) -> - P1 = ?INTERFACE:open("p1"), - P2 = ?INTERFACE:open("p2"), - P2Id = ?INTERFACE:get_id(P2), - - {'EXIT',{badarg,[{?INTERFACE,attach,[inval,P2Id],_}|_]}} = - (catch ?INTERFACE:attach(inval,P2Id)), - - {'EXIT',{badarg,[{?INTERFACE,attach,[P1,[12345]],_}|_]}} = - (catch ?INTERFACE:attach(P1,[12345])), - - ok = ?INTERFACE:close(P1), - ok = ?INTERFACE:close(P2), - {'EXIT',{badarg,[{?INTERFACE,attach,[P1,P2Id],_}|_]}} = - (catch ?INTERFACE:attach(P1,P2Id)), - - ok. - -detach_errors(_Config) -> - P1 = ?INTERFACE:open("p1"), - P2 = ?INTERFACE:open("p2"), - P2Id = ?INTERFACE:get_id(P2), - - Ref = ?INTERFACE:attach(P1,P2Id), - - {'EXIT',{badarg,[{?INTERFACE,detach,[inval,Ref],_}|_]}} = - (catch ?INTERFACE:detach(inval,Ref)), - - {'EXIT',{badarg,[{?INTERFACE,detach,[P1,inval],_}|_]}} = - (catch ?INTERFACE:detach(P1,inval)), - - ok = ?INTERFACE:detach(P1,Ref), - ok = ?INTERFACE:detach(P1,Ref), - - case ?INTERFACE of - ose -> ok; - _ -> - ok = ?INTERFACE:close(P1) - end, - - ok = ?INTERFACE:close(P2), - ok = ?INTERFACE:close(P1), - - {'EXIT',{badarg,[{?INTERFACE,detach,[P1,Ref],_}|_]}} = - (catch ?INTERFACE:detach(P1,Ref)), - - receive - Else -> ct:fail({got,Else}) - after 100 -> - ok - end. - -send_errors(_Config) -> - P1 = ?INTERFACE:open("p1"), - P2 = ?INTERFACE:open("p2"), - P2Id = ?INTERFACE:get_id(P2), - - {'EXIT',{badarg,[{?INTERFACE,send,[inval,P2Id,42,"hello"],_}|_]}} = - (catch ?INTERFACE:send(inval,P2Id,42,"hello")), - {'EXIT',{badarg,[{?INTERFACE,send,[P1,inval,42,"hello"],_}|_]}} = - (catch ?INTERFACE:send(P1,inval,42,"hello")), - {'EXIT',{badarg,[{?INTERFACE,send,[P1,P2Id,inval,"hello"],_}|_]}} = - (catch ?INTERFACE:send(P1,P2Id,inval,"hello")), - {'EXIT',{badarg,[{?INTERFACE,send,[P1,P2Id,42,inval],_}|_]}} = - (catch ?INTERFACE:send(P1,P2Id,42,inval)), - - ok = ?INTERFACE:close(P2), - ok = ?INTERFACE:send(P1,P2Id,42,"hello"), - ok = ?INTERFACE:close(P1), - - {'EXIT',{badarg,[{?INTERFACE,send,[P1,P2Id,42,"hello"],_}|_]}} = - (catch ?INTERFACE:send(P1,P2Id,42,"hello")), - - receive - Else -> ct:fail({got,Else}) - after 100 -> - ok - end. - -send_w_s_errors(_Config) -> - P1 = ?INTERFACE:open("p1"), - P1Id = ?INTERFACE:get_id(P1), - P2 = ?INTERFACE:open("p2"), - P2Id = ?INTERFACE:get_id(P2), - P3 = ?INTERFACE:open("p3"), - P3Id = ?INTERFACE:get_id(P3), - - {'EXIT',{badarg,[{?INTERFACE,send,[inval,P2Id,P1Id,42,"hello"],_}|_]}} = - (catch ?INTERFACE:send(inval,P2Id,P1Id,42,"hello")), - {'EXIT',{badarg,[{?INTERFACE,send,[P2,-1,P1Id,42,"hello"],_}|_]}} = - (catch ?INTERFACE:send(P2,-1,P1Id,42,"hello")), - {'EXIT',{badarg,[{?INTERFACE,send,[P2,P2Id,1 bsl 32,42,"hello"],_}|_]}} = - (catch ?INTERFACE:send(P2,P2Id,1 bsl 32,42,"hello")), - {'EXIT',{badarg,[{?INTERFACE,send,[P2,P2Id,P1Id,inval,"hello"],_}|_]}} = - (catch ?INTERFACE:send(P2,P2Id,P1Id,inval,"hello")), - {'EXIT',{badarg,[{?INTERFACE,send,[P2,P2Id,P1Id,42,inval],_}|_]}} = - (catch ?INTERFACE:send(P2,P2Id,P1Id,42,inval)), - - ok = ?INTERFACE:close(P3), - ok = ?INTERFACE:send(P2,P3Id,P1Id,42,"hello"), - - ok = ?INTERFACE:close(P1), - ok = ?INTERFACE:send(P2,P2Id,P1Id,42,"hello"), - ok = ?INTERFACE:close(P2), - - {'EXIT',{badarg,[{?INTERFACE,send,[P1,P2Id,P1Id,42,"hello"],_}|_]}} = - (catch ?INTERFACE:send(P1,P2Id,P1Id,42,"hello")), - - receive - Else -> ct:fail({got,Else}) - after 100 -> - ok - end. - -listen_errors(_Config) -> - - P1 = ?INTERFACE:open("p1"), - P1Id = ?INTERFACE:get_id(P1), - - {'EXIT',{badarg,[{?INTERFACE,listen,[inval,[42]],_}|_]}} = - (catch ?INTERFACE:listen(inval,[42])), - {'EXIT',{badarg,[{?INTERFACE,listen,[P1,inval],_}|_]}} = - (catch ?INTERFACE:listen(P1,inval)), - {'EXIT',{badarg,[{?INTERFACE,listen,[P1,[1 bsl 33]],_}|_]}} = - (catch ?INTERFACE:listen(P1,[1 bsl 33])), - - ok = ?INTERFACE:listen(P1,[42,42,42,42,42,42,42,42,42,42,42,42,42]), - - case ?INTERFACE of - ose -> ok; - _ -> - ?INTERFACE:send(P1,P1Id,42,"hello"), - timer:sleep(50), - ?INTERFACE:listen(P1,[]), - ?INTERFACE:send(P1,P1Id,42,"hello2"), - - receive - {message,P1,42,"hello"} -> ok - end, - - receive - Else -> ct:fail({got,Else}) - after 100 -> - ok - end - end, - - ok = ?INTERFACE:close(P1), - {'EXIT',{badarg,[{?INTERFACE,listen,[P1,[42]],_}|_]}} = - (catch ?INTERFACE:listen(P1,[42])), - - ok. - -%% -%% Internal functions -%% -multi_open(N,ListenNums) -> - multi_open(N,ListenNums,[]). - -multi_open(0,_,Acc) -> - Acc; -multi_open(N,ListenNums,Acc) -> - P = ?INTERFACE:open("p"++integer_to_list(N)), - ok = ?INTERFACE:listen(P,ListenNums), - multi_open(N-1,ListenNums,[P|Acc]). - -n(_F,0) -> - ok; -n(F,N) -> - ok = F(N), - n(F,N-1). - - -flush() -> - receive - Msg -> - [Msg|flush()] - after 0 -> - [] - end. diff --git a/lib/ose/vsn.mk b/lib/ose/vsn.mk deleted file mode 100644 index fb1cf8219f..0000000000 --- a/lib/ose/vsn.mk +++ /dev/null @@ -1 +0,0 @@ -OSE_VSN = 1.1 diff --git a/lib/runtime_tools/c_src/Makefile.in b/lib/runtime_tools/c_src/Makefile.in index 448b8c62c2..aeacee0655 100644 --- a/lib/runtime_tools/c_src/Makefile.in +++ b/lib/runtime_tools/c_src/Makefile.in @@ -102,12 +102,7 @@ endif _create_dirs := $(shell mkdir -p $(OBJDIR) $(LIBDIR)) -ifneq ($(findstring ose,$(TARGET)),ose) debug opt valgrind: $(SOLIBS) $(OBJDIR) $(LIBDIR) $(NIF_LIB) -else -# We do not build this on OSE -debug opt valgrind: -endif DYNTRACE_OBJS = $(before_DTrace_OBJS) @@ -159,10 +154,8 @@ include $(ERL_TOP)/make/otp_release_targets.mk release_spec: opt $(INSTALL_DIR) "$(RELSYSDIR)/priv/obj" $(INSTALL_DIR) "$(RELSYSDIR)/priv/lib" -ifneq ($(findstring ose,$(TARGET)),ose) $(INSTALL_PROGRAM) $(DYNTRACE_OBJS) "$(RELSYSDIR)/priv/obj" $(INSTALL_PROGRAM) $(NIF_LIB) $(SOLIBS) "$(RELSYSDIR)/priv/lib" -endif release_docs_spec: diff --git a/lib/ssh/test/ssh_upgrade_SUITE.erl b/lib/ssh/test/ssh_upgrade_SUITE.erl index 85f4d36258..0d936c118b 100644 --- a/lib/ssh/test/ssh_upgrade_SUITE.erl +++ b/lib/ssh/test/ssh_upgrade_SUITE.erl @@ -46,20 +46,17 @@ all() -> init_per_suite(Config0) -> catch crypto:stop(), - try {crypto:start(), erlang:system_info({wordsize, internal}) == - erlang:system_info({wordsize, external})} of - {ok, true} -> - case ct_release_test:init(Config0) of - {skip, Reason} -> - {skip, Reason}; - Config -> - ssh:start(), - Config - end; - {ok, false} -> - {skip, "Test server will not handle halfwordemulator correctly. Skip as halfwordemulator is deprecated"} + try crypto:start() of + ok -> + case ct_release_test:init(Config0) of + {skip, Reason} -> + {skip, Reason}; + Config -> + ssh:start(), + Config + end catch _:_ -> - {skip, "Crypto did not start"} + {skip, "Crypto did not start"} end. end_per_suite(Config) -> diff --git a/lib/ssl/test/ssl_upgrade_SUITE.erl b/lib/ssl/test/ssl_upgrade_SUITE.erl index 17b0240fe8..fa9593b5dd 100644 --- a/lib/ssl/test/ssl_upgrade_SUITE.erl +++ b/lib/ssl/test/ssl_upgrade_SUITE.erl @@ -39,20 +39,19 @@ all() -> init_per_suite(Config0) -> catch crypto:stop(), - try {crypto:start(), erlang:system_info({wordsize, internal}) == erlang:system_info({wordsize, external})} of - {ok, true} -> - case ct_release_test:init(Config0) of - {skip, Reason} -> - {skip, Reason}; - Config -> - {ok, _} = make_certs:all(?config(data_dir, Config), - ?config(priv_dir, Config)), - ssl_test_lib:cert_options(Config) - end; - {ok, false} -> - {skip, "Test server will not handle halfwordemulator correctly. Skip as halfwordemulator is deprecated"} + try crypto:start() of + ok -> + case ct_release_test:init(Config0) of + {skip, Reason} -> + {skip, Reason}; + Config -> + Result = + {ok, _} = make_certs:all(?config(data_dir, Config), + ?config(priv_dir, Config)), + ssl_test_lib:cert_options(Config) + end catch _:_ -> - {skip, "Crypto did not start"} + {skip, "Crypto did not start"} end. end_per_suite(Config) -> diff --git a/lib/stdlib/src/slave.erl b/lib/stdlib/src/slave.erl index 24fc8ce204..4e629a5e56 100644 --- a/lib/stdlib/src/slave.erl +++ b/lib/stdlib/src/slave.erl @@ -289,10 +289,7 @@ register_unique_name(Number) -> %% no need to use rsh. mk_cmd(Host, Name, Args, Waiter, Prog0) -> - Prog = case os:type() of - {ose,_} -> mk_ose_prog(Prog0); - _ -> quote_progname(Prog0) - end, + Prog = quote_progname(Prog0), BasicCmd = lists:concat([Prog, " -detached -noinput -master ", node(), " ", long_or_short(), Name, "@", Host, @@ -312,24 +309,6 @@ mk_cmd(Host, Name, Args, Waiter, Prog0) -> end end. -%% On OSE we have to pass the beam arguments directory to the slave -%% process. To find out what arguments that should be passed on we -%% make an assumption. All arguments after the last "--" should be -%% skipped. So given these arguments: -%% -Muycs256 -A 1 -- -root /mst/ -progname beam.debug.smp -- -home /mst/ -- -kernel inetrc '"/mst/inetrc.conf"' -- -name test@localhost -%% we send -%% -Muycs256 -A 1 -- -root /mst/ -progname beam.debug.smp -- -home /mst/ -- -kernel inetrc '"/mst/inetrc.conf"' -- -%% to the slave with whatever other args that are added in mk_cmd. -mk_ose_prog(Prog) -> - SkipTail = fun("--",[]) -> - ["--"]; - (_,[]) -> - []; - (Arg,Args) -> - [Arg," "|Args] - end, - [Prog,tl(lists:foldr(SkipTail,[],erlang:system_info(emu_args)))]. - %% This is an attempt to distinguish between spaces in the program %% path and spaces that separate arguments. The program is quoted to %% allow spaces in the path. diff --git a/lib/stdlib/test/ets_SUITE.erl b/lib/stdlib/test/ets_SUITE.erl index ae431d66d9..1b80f555d7 100644 --- a/lib/stdlib/test/ets_SUITE.erl +++ b/lib/stdlib/test/ets_SUITE.erl @@ -731,10 +731,6 @@ chk_normal_tab_struct_size() -> % ?line ok % end. --define(DB_TREE_STACK_NEED,50). % The static stack for a tree, in halfword pointers are two internal words - % so the stack gets twice as big --define(DB_HASH_SIZEOF_EXTSEG,260). % The segment size in words, in halfword this will be twice as large. - adjust_xmem([T1,T2,T3,T4], {A0,B0,C0,D0} = _Mem0) -> %% Adjust for 64-bit, smp, and os: %% Table struct size may differ. @@ -748,19 +744,7 @@ adjust_xmem([T1,T2,T3,T4], {A0,B0,C0,D0} = _Mem0) -> % end, TabDiff = ?TAB_STRUCT_SZ, - Mem1 = {A0+TabDiff, B0+TabDiff, C0+TabDiff, D0+TabDiff}, - - case {erlang:system_info({wordsize,internal}),erlang:system_info({wordsize,external})} of - %% Halfword, corrections for regular pointers occupying two internal words. - {4,8} -> - {A1,B1,C1,D1} = Mem1, - {A1+4*ets:info(T1, size)+?DB_TREE_STACK_NEED, - B1+3*ets:info(T2, size)+?DB_HASH_SIZEOF_EXTSEG, - C1+3*ets:info(T3, size)+?DB_HASH_SIZEOF_EXTSEG, - D1+3*ets:info(T4, size)+?DB_HASH_SIZEOF_EXTSEG}; - _ -> - Mem1 - end. + {A0+TabDiff, B0+TabDiff, C0+TabDiff, D0+TabDiff}. t_whitebox(doc) -> ["Diverse whitebox testes"]; diff --git a/lib/stdlib/test/filename_SUITE.erl b/lib/stdlib/test/filename_SUITE.erl index fd47da8150..4372e77df9 100644 --- a/lib/stdlib/test/filename_SUITE.erl +++ b/lib/stdlib/test/filename_SUITE.erl @@ -97,20 +97,11 @@ absname(Config) when is_list(Config) -> ?line file:set_cwd(Cwd), ok; - Type -> - case Type of - {unix, _} -> - ?line ok = file:set_cwd("/usr"), - ?line "/usr/foo" = filename:absname(foo), - ?line "/usr/foo" = filename:absname("foo"), - ?line "/usr/../ebin" = filename:absname("../ebin"); - {ose, _} -> - ?line ok = file:set_cwd("/romfs"), - ?line "/romfs/foo" = filename:absname(foo), - ?line "/romfs/foo" = filename:absname("foo"), - ?line "/romfs/../ebin" = filename:absname("../ebin") - end, - + {unix, _} -> + ?line ok = file:set_cwd("/usr"), + ?line "/usr/foo" = filename:absname(foo), + ?line "/usr/foo" = filename:absname("foo"), + ?line "/usr/../ebin" = filename:absname("../ebin"), ?line file:set_cwd("/"), ?line "/foo" = filename:absname(foo), ?line "/foo" = filename:absname("foo"), @@ -494,18 +485,10 @@ absname_bin(Config) when is_list(Config) -> ?line file:set_cwd(Cwd), ok; - Type -> - case Type of - {unix,_} -> - ?line ok = file:set_cwd(<<"/usr">>), - ?line <<"/usr/foo">> = filename:absname(<<"foo">>), - ?line <<"/usr/../ebin">> = filename:absname(<<"../ebin">>); - {ose,_} -> - ?line ok = file:set_cwd(<<"/romfs">>), - ?line <<"/romfs/foo">> = filename:absname(<<"foo">>), - ?line <<"/romfs/../ebin">> = filename:absname(<<"../ebin">>) - end, - + {unix, _} -> + ?line ok = file:set_cwd(<<"/usr">>), + ?line <<"/usr/foo">> = filename:absname(<<"foo">>), + ?line <<"/usr/../ebin">> = filename:absname(<<"../ebin">>), ?line file:set_cwd(<<"/">>), ?line <<"/foo">> = filename:absname(<<"foo">>), ?line <<"/../ebin">> = filename:absname(<<"../ebin">>), diff --git a/lib/tools/c_src/Makefile.in b/lib/tools/c_src/Makefile.in index 66bba229f6..e8bce149b1 100644 --- a/lib/tools/c_src/Makefile.in +++ b/lib/tools/c_src/Makefile.in @@ -97,11 +97,8 @@ DRIVERS= ifneq ($(strip $(ETHR_LIB_NAME)),) # Need ethread package for emem -ifneq ($(findstring ose,$(TARGET)),ose) -# Do not build on OSE PROGS += $(BIN_DIR)/emem$(TYPEMARKER)@EXEEXT@ endif -endif EMEM_OBJ_DIR=$(OBJ_DIR)/emem CREATE_DIRS += $(EMEM_OBJ_DIR) @@ -152,12 +149,7 @@ ERTS_LIB = $(ERL_TOP/erts/lib_src/obj/$(TARGET)/$(TYPE)/MADE _create_dirs := $(shell mkdir -p $(CREATE_DIRS)) -ifneq ($(findstring ose,$(TARGET)),ose) all: $(PROGS) $(DRIVERS) -else -# Do not build dynamic files on OSE -all: -endif $(ERTS_LIB): $(make_verbose)cd $(ERL_TOP)/erts/lib_src && $(MAKE) $(TYPE) |