diff options
Diffstat (limited to 'otp_build')
| -rwxr-xr-x | otp_build | 153 |
1 files changed, 140 insertions, 13 deletions
@@ -2,7 +2,7 @@ # # %CopyrightBegin% # -# Copyright Ericsson AB 2002-2012. All Rights Reserved. +# Copyright Ericsson AB 2002-2014. All Rights Reserved. # # The contents of this file are subject to the Erlang Public License, # Version 1.1, (the "License"); you may not use this file except in @@ -52,6 +52,9 @@ usage () echo " release [-a] <target_dir> - creates full release to <target_dir>" echo " smp [-a] - build an Erlang system, smp flavor only" echo " tests <dir> - Build testsuites to <dir>" + echo " patch_app <target_dir> <app1>... - build given apps to <target_dir>" + echo " If core apps are patched, new start scripts will be created" + echo " and 'Install' must be run again." echo "" echo "These are for cleaning up an open source distribution" echo "with prebuilt files, so that it resembles the clean developers" @@ -170,6 +173,14 @@ determine_version_controller () # Special static config flags for certain platforms are set here set_config_flags () { + # + # NOTE! Do not add special flags here without a *very good* + # reason. We normally do not want "./otp_build configure" + # and "./configure" to produce different results. + # However, in the Windows case this does not matter, since + # the only supported way to build on Windows is using + # otp_build. + # # * Extra flags to pass to configure are placed in `CONFIG_FLAGS'. # * The command line is no longer added to `CONFIG_FLAGS' by # `set_config_flags'. It is instead passed directly to @@ -180,16 +191,6 @@ set_config_flags () # (in the cross compilation case the whole command line as well as # the cross configuration have been moved here). - if target_contains linux; then - XX=`echo $* | grep -v able-fp-exceptions` - if [ "$*" = "$XX" ]; then - CONFIG_FLAGS="$CONFIG_FLAGS --disable-fp-exceptions" - fi - fi - if target_contains "univel-sysv4"; then - CONFIG_FLAGS="$CONFIG_FLAGS --x-libraries=/usr/lib/X11" - fi - if target_contains free_source; then CONFIG_FLAGS="$CONFIG_FLAGS --host=$TARGET" fi @@ -1191,6 +1192,129 @@ do_release () release || exit 1 } +do_patch_app () +{ + # If target dir exists and has an installation of same major release, then + # build given apps. + # If patch includes erts, kernel, stdlib, sasl, then find latest + # erts, kernel, stdlib, sasl and create .rel files. + # Create .script/.boot + + if [ $# -lt 2 ]; then + usage + exit 1 + fi + + setup_make + if [ X`$MAKE is_cross_configured` = Xyes ]; then + TARGET=`$MAKE target_configured` + fi + target_dir=$1 + if [ ! -d $target_dir/releases/$otp_major_vsn ]; then + echo "No OTP $otp_major_vsn installation in $target_dir" 1>&2 + exit 1 + fi + + shift + + otp_version=`cat "$target_dir/OTP_VERSION"` || { echo "Not able to read $target_dir/OTP_VERSION" 1>&2; exit 1; } + { echo "$otp_version" | sed "s|^\([^\*]*\)\**|\1\*\*|g" > $target_dir/OTP_VERSION; } 2>/dev/null || { echo "Not able to update $target_dir/OTP_VERSION" 1>&2; exit 1; } + + # Build all applications to target + for app in "$@"; do + if [ "$app" = "erts" ] && [ -d $ERL_TOP/$app ]; then + (cd $ERL_TOP/$app && $MAKE MAKE="$MAKE" TARGET=$TARGET \ + TESTROOT=$target_dir release) || exit 1 + elif [ "$app" != "erts" ] && [ -d $ERL_TOP/lib/$app ]; then + (cd $ERL_TOP/lib/$app && $MAKE MAKE="$MAKE" TARGET=$TARGET \ + TESTROOT=$target_dir release) || exit 1 + else + echo "Invalid application $app" 1>&2 + exit 1 + fi + done + + # If erts, kernel, stdlib or sasl is included, find versions + for app in "$@"; do + if [ "$app" = "erts" ]; then + erts_vsn=`grep '^VSN' erts/vsn.mk | sed "s|^VSN.*=[^0-9]*\([0-9].*\)$|\1|g"` + update_rel=true + elif [ "$app" = "kernel" ]; then + kernel_vsn=`sed "s|^KERNEL_VSN[^=]*=[^0-9]*\([0-9].*\)$|\1|g" lib/kernel/vsn.mk` + update_rel=true + elif [ "$app" = "stdlib" ]; then + stdlib_vsn=`sed "s|^STDLIB_VSN[^=]*=[^0-9]*\([0-9].*\)$|\1|g" lib/stdlib/vsn.mk` + update_rel=true + elif [ "$app" = "sasl" ]; then + sasl_vsn=`sed "s|^SASL_VSN[^=]*=[^0-9]*\([0-9].*\)$|\1|g" lib/sasl/vsn.mk` + update_rel=true + fi + done + + # and find the old versions for those not included + if [ "X$update_rel" != "X" ]; then + if [ "X$erts_vsn" = "X" ]; then + erts_vsns=`ls -d $target_dir/erts-* | sed "s|$target_dir/erts-\([0-9\.].*\)|\1|g"` + erts_vsn=`echo "$erts_vsns" | sort -t '.' -g | tail -n 1` + fi + if [ "X$kernel_vsn" = "X" ]; then + kernel_vsns=`ls -d $target_dir/lib/kernel-* | sed "s|$target_dir/lib/kernel-\([0-9\.].*\)|\1|g"` + kernel_vsn=`echo "$kernel_vsns" | sort -t '.' -g | tail -n 1` + fi + if [ "X$stdlib_vsn" = "X" ]; then + stdlib_vsns=`ls -d $target_dir/lib/stdlib-* | sed "s|$target_dir/lib/stdlib-\([0-9\.].*\)|\1|g"` + stdlib_vsn=`echo "$stdlib_vsns" | sort -t '.' -g | tail -n 1` + fi + if [ "X$sasl_vsn" = "X" ]; then + sasl_vsns=`ls -d $target_dir/lib/sasl-* | sed "s|$target_dir/lib/sasl-\([0-9\.].*\)|\1|g"` + sasl_vsn=`echo "$sasl_vsns" | sort -t '.' -g | tail -n 1` + fi + + # Generate .rel, .script and .boot - to tmp dir + start_clean="{release, {\"OTP APN 181 01\",\"$otp_major_vsn\"}, {erts, \"$erts_vsn\"},\n [{kernel,\"$kernel_vsn\"},\n {stdlib,\"$stdlib_vsn\"}]}.\n" + start_sasl="{release, {\"OTP APN 181 01\",\"$otp_major_vsn\"}, {erts, \"$erts_vsn\"},\n [{kernel,\"$kernel_vsn\"},\n {stdlib,\"$stdlib_vsn\"},\n {sasl,\"$sasl_vsn\"}]}.\n" + + tmp_dir=$target_dir/tmp; + if [ ! -d $tmp_dir ]; then + mkdir $tmp_dir + fi + echo $start_sasl > $tmp_dir/start_sasl.rel + echo $start_clean > $tmp_dir/start_clean.rel + echo $start_clean > $tmp_dir/no_dot_erlang.rel + + erlc=$ERL_TOP/bootstrap/bin/erlc + if [ ! -x $erlc ]; then + echo "erlc not found, can not create .script and .boot files" 1>&2 + exit 1 + fi + + $erlc -I$target_dir/lib/*/ebin -o$tmp_dir $tmp_dir/start_sasl.rel || exit 1 + $erlc -I$target_dir/lib/*/ebin -o$tmp_dir +no_warn_sasl $tmp_dir/start_clean.rel || exit 1 + $erlc -I$target_dir/lib/*/ebin -o$tmp_dir +no_warn_sasl +no_dot_erlang $tmp_dir/no_dot_erlang.rel || exit 1 + + # Generate RELEASES file + erl=$ERL_TOP/bootstrap/bin/erl + if [ ! -x $erl ]; then + echo "erl not found, can not create RELEASES file" 1>&2 + exit 1 + fi + $erl -noinput +B -eval "release_handler:create_RELEASES(\"%ERL_ROOT%\", \"$tmp_dir\", \"$tmp_dir/start_sasl.rel\", []), halt()" || exit 1 + + # If all good so far, move generated files into target area + mv $tmp_dir/RELEASES $target_dir/releases/RELEASES.src + mv $tmp_dir/* $target_dir/releases/$otp_major_vsn + rmdir $tmp_dir + + # Remove old start scripts (forces a new run of Install) + rm -f $target_dir/releases/RELEASES + rm -f $target_dir/bin/*.script + rm -f $target_dir/bin/*.boot + rm -f $target_dir/bin/erl + fi + +} + + do_tests () { setup_make @@ -1308,9 +1432,9 @@ cd $ERL_TOP determine_version_controller -# Unset ERL_FLAGS and ERL_OTP<Major-VSN>_FLAGS during bootstrap to +# Unset ERL_FLAGS and ERL_OTP<OTP Release>_FLAGS during bootstrap to # prevent potential problems -otp_major_vsn=`cat erts/vsn.mk | grep SYSTEM_VSN | sed "s|SYSTEM_VSN[^=]*=[^0-9]*\([0-9]*\).*|\1|g"` +otp_major_vsn=`cat OTP_VERSION | sed "s|\([0-9]*\).*|\1|"` erl_otp_flags="ERL_OTP${otp_major_vsn}_FLAGS" unset ERL_FLAGS unset ${erl_otp_flags} @@ -1451,6 +1575,9 @@ case "$1" in shift fi; do_release "$2";; + patch_app) + shift; + do_patch_app "$@";; tests) if [ $minus_a_flag = true ]; then shift |