diff options
Diffstat (limited to 'system/doc/system_principles/create_target.xmlsrc')
| -rw-r--r-- | system/doc/system_principles/create_target.xmlsrc | 250 |
1 files changed, 224 insertions, 26 deletions
diff --git a/system/doc/system_principles/create_target.xmlsrc b/system/doc/system_principles/create_target.xmlsrc index bc2a76db47..b5f8d8ac4d 100644 --- a/system/doc/system_principles/create_target.xmlsrc +++ b/system/doc/system_principles/create_target.xmlsrc @@ -1,10 +1,10 @@ -<?xml version="1.0" encoding="latin1" ?> +<?xml version="1.0" encoding="utf-8" ?> <!DOCTYPE chapter SYSTEM "chapter.dtd"> <chapter> <header> <copyright> - <year>2002</year><year>2011</year> + <year>2002</year><year>2014</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -21,7 +21,7 @@ </legalnotice> - <title>Creating a First Target System</title> + <title>Creating and Upgrading a Target System</title> <prepared>Peter Högfeldt</prepared> <responsible></responsible> <docno></docno> @@ -71,23 +71,24 @@ </section> <section> + <marker id="create"/> <title>Creating a Target System</title> <p>It is assumed that you have a working Erlang/OTP system structured according to the OTP Design Principles.</p> - <p><em>Step 1.</em> First create a <c>.rel</c> file (see - <c>rel(4)</c>) that specifies the <c>erts</c> version - and lists all applications that should be included in the new - basic target system. An example is the following + <p><em>Step 1.</em> First create a <c>.rel</c> file (see <seealso + marker="sasl:rel">rel(4)</seealso>) that specifies the <c>erts</c> + version and lists all applications that should be included in the + new basic target system. An example is the following <c>mysystem.rel</c> file:</p> <code type="none"> %% mysystem.rel {release, {"MYSYSTEM", "FIRST"}, - {erts, "5.1"}, - [{kernel, "2.7"}, - {stdlib, "1.10"}, - {sasl, "1.9.3"}, - {pea, "1.0"}]}. </code> + {erts, "5.10.4"}, + [{kernel, "2.16.4"}, + {stdlib, "1.19.4"}, + {sasl, "2.3.4"}, + {pea, "1.0"}]}.</code> <p>The listed applications are not only original Erlang/OTP applications but possibly also new applications that you have written yourself (here examplified by the application @@ -116,13 +117,13 @@ os> <input>erl -pa /home/user/target_system/myapps/pea-1.0/ebin</input></pre> <c>systools:make_tar/2</c>. That file has the following contents:</p> <code type="none"> -erts-5.1/bin/ +erts-5.10.4/bin/ releases/FIRST/start.boot releases/FIRST/mysystem.rel releases/mysystem.rel -lib/kernel-2.7/ -lib/stdlib-1.10/ -lib/sasl-1.9.3/ +lib/kernel-2.16.4/ +lib/stdlib-1.19.4/ +lib/sasl-2.3.4/ lib/pea-1.0/ </code> <p>The file <c>releases/FIRST/start.boot</c> is a copy of our <c>mysystem.boot</c></p> @@ -142,16 +143,19 @@ lib/pea-1.0/ </code> <item>Creates the temporary directory <c>tmp</c> and extracts the tar file <c>mysystem.tar.gz</c> into that directory. </item> <item>Deletes the <c>erl</c> and <c>start</c> files from - <c>tmp/erts-5.1/bin</c>. These files will be created again from + <c>tmp/erts-5.10.4/bin</c>. These files will be created again from source when installing the release.</item> <item>Creates the directory <c>tmp/bin</c>.</item> <item>Copies the previously created file <c>plain.boot</c> to <c>tmp/bin/start.boot</c>.</item> <item>Copies the files <c>epmd</c>, <c>run_erl</c>, and - <c>to_erl</c> from the directory <c>tmp/erts-5.1/bin</c> to + <c>to_erl</c> from the directory <c>tmp/erts-5.10.4/bin</c> to the directory <c>tmp/bin</c>.</item> + <item>Creates the directory <c>tmp/log</c>, which will be used + if the system is started as embedded with the <c>bin/start</c> + script.</item> <item>Creates the file <c>tmp/releases/start_erl.data</c> with - the contents "5.1 FIRST". This file is to be passed as data + the contents "5.10.4 FIRST". This file is to be passed as data file to the <c>start_erl</c> script. </item> <item>Recreates the file <c>mysystem.tar.gz</c> from the directories @@ -171,11 +175,11 @@ lib/pea-1.0/ </code> <item>Extracts the tar file <c>mysystem.tar.gz</c> into the target directory <c>/usr/local/erl-target</c>.</item> <item>In the target directory reads the file <c>releases/start_erl.data</c> - in order to find the Erlang runtime system version ("5.1").</item> + in order to find the Erlang runtime system version ("5.10.4").</item> <item>Substitutes <c>%FINAL_ROOTDIR%</c> and <c>%EMU%</c> for <c>/usr/local/erl-target</c> and <c>beam</c>, respectively, in the files <c>erl.src</c>, <c>start.src</c>, and - <c>start_erl.src</c> of the target <c>erts-5.1/bin</c> + <c>start_erl.src</c> of the target <c>erts-5.10.4/bin</c> directory, and puts the resulting files <c>erl</c>, <c>start</c>, and <c>run_erl</c> in the target <c>bin</c> directory.</item> @@ -185,6 +189,7 @@ lib/pea-1.0/ </code> </section> <section> + <marker id="start"/> <title>Starting a Target System</title> <p>Now we have a target system that can be started in various ways.</p> <p>We start it as a <em>basic target system</em> by invoking</p> @@ -193,7 +198,7 @@ os> <input>/usr/local/erl-target/bin/erl</input></pre> <p>where only the <c>kernel</c> and <c>stdlib</c> applications are started, i.e. the system is started as an ordinary development system. There are only two files needed for all this to work: - <c>bin/erl</c> file (obtained from <c>erts-5.1/bin/erl.src</c>) + <c>bin/erl</c> file (obtained from <c>erts-5.10.4/bin/erl.src</c>) and the <c>bin/start.boot</c> file (a copy of <c>plain.boot</c>).</p> <p>We can also start a distributed system (requires <c>bin/epmd</c>).</p> <p>To start all applications specified in the original @@ -208,9 +213,10 @@ os> <input>/usr/local/erl-target/bin/erl -boot /usr/local/erl-target/releases/FI <c>bin/run_erl</c>, which in turn calls <c>bin/start_erl</c> (roughly, <c>start_erl</c> is an embedded variant of <c>erl</c>). </p> - <p>The shell script <c>start</c> is only an example. You should - edit it to suite your needs. Typically it is executed when the - UNIX system boots.</p> + <p>The shell script <c>start</c>, which is generated from + erts-5.10.4/bin/start.src during installation, is only an + example. You should edit it to suite your needs. Typically it is + executed when the UNIX system boots.</p> <p><c>run_erl</c> is a wrapper that provides logging of output from the run-time system to file. It also provides a simple mechanism for attaching to the Erlang shell (<c>to_erl</c>).</p> @@ -218,7 +224,7 @@ os> <input>/usr/local/erl-target/bin/erl -boot /usr/local/erl-target/releases/FI (<c>"/usr/local/erl-target"</c>), the releases directory (<c>"/usr/local/erl-target/releases"</c>), and the location of the <c>start_erl.data</c> file. It reads the run-time system - version (<c>"5.1"</c>) and release version (<c>"FIRST"</c>) from + version (<c>"5.10.4"</c>) and release version (<c>"FIRST"</c>) from the <c>start_erl.data</c> file, starts the run-time system of the version found, and provides <c>-boot</c> flag specifying the boot file of the release version found @@ -258,6 +264,198 @@ os> <input>/usr/local/erl-target/bin/erl -boot /usr/local/erl-target/releases/FI </section> <section> + <title>Creating the Next Version</title> + + <p> + In this example the <c>pea</c> application has been changed, and + so are <c>erts</c>, <c>kernel</c>, <c>stdlib</c> and + <c>sasl</c>. + </p> + + <p> + <em>Step 1.</em> Create the <c>.rel</c> file: + </p> + <code type="none"> +%% mysystem2.rel +{release, + {"MYSYSTEM", "SECOND"}, + {erts, "6.0"}, + [{kernel, "3.0"}, + {stdlib, "2.0"}, + {sasl, "2.4"}, + {pea, "2.0"}]}.</code> + <p> + <em>Step 2.</em> Create the application upgrade file (see + <seealso marker="sasl:appup">appup(4)</seealso>) for <c>pea</c>, + for example: + </p> + <code type="none"> +%% pea.appup +{"2.0", + [{"1.0",[{load_module,pea_lib}]}], + [{"1.0",[{load_module,pea_lib}]}]}.</code> + <p> + <em>Step 3.</em> From the directory where the + <c>mysystem2.rel</c> file reside, start the Erlang/OTP system: + </p> + <pre> +os> <input>erl -pa /home/user/target_system/myapps/pea-2.0/ebin</input></pre> + <p>giving the path to the new version of <c>pea</c>. </p> + + <p> + <em>Step 4.</em> Create the release upgrade file (see <seealso + marker="sasl:relup">relup(4)</seealso>): + </p> + <pre> +1> <input>systools:make_relup("mysystem2",["mysystem"],["mysystem"],[{path,["/home/user/target_system/myapps/pea-1.0/ebin","/my/old/erlang/lib/*/ebin"]}]).</input></pre> + <p> + where <c>"mysystem"</c> is the base release and + <c>"mysystem2"</c> is the release to upgrade to. + </p> + <p> + Note that the <c>path</c> option is used for pointing out the + old version of all applications. (The new versions are already + in the code path - assuming of course that the erlang node on + which this is executed is running the correct version of + Erlang/OTP.) + </p> + <p> + <em>Step 5.</em> Create the new release: + </p> + <pre> +2> <input>target_system:create("mysystem2").</input></pre> + <p> + Given that the <c>relup</c> file generated in step 4 above is + now located in the current directory, it will automatically be + included in the release package. + </p> + </section> + + <section> + <title>Upgrading the Target System</title> + <p> + This part is done on the target node, and for this example we + want the node to be running as an embedded system with the + <c>-heart</c> option, allowing automatic restart of the + node. See <seealso marker="#start">Starting a Target + System</seealso> above for more information. + </p> + <p> + We add <c>-heart</c> to <c>bin/start</c>: + </p> + <code type="none"> +#!/bin/sh +ROOTDIR=/usr/local/erl-target/ + +if [ -z "$RELDIR" ] +then + RELDIR=$ROOTDIR/releases +fi + +START_ERL_DATA=${1:-$RELDIR/start_erl.data} + +$ROOTDIR/bin/run_erl -daemon /tmp/ $ROOTDIR/log "exec $ROOTDIR/bin/start_erl $ROOTDIR $RELDIR $START_ERL_DATA -heart</code> + <p> + And we use the simplest possible <c>sys.config</c>, which we + store in <c>releases/FIRST</c>: + </p> + <code type="none"> +%% sys.config +[].</code> + <p> + Finally, in order to prepare the upgrade, we need to put the new + release package in the <c>releases</c> directory of the first + target system: + </p> + <pre> +os> <input>cp mysystem2.tar.gz /usr/local/erl-target/releases</input></pre> + <p> + And assuming that the node has been started like this: + </p> + <pre> +os> <input>/usr/local/erl-target/bin/start</input></pre> + <p> + it can be accessed like this: + </p> + <pre> +os> <input>/usr/local/erl-target/bin/to_erl /tmp/erlang.pipe.1</input></pre> + <p> + Also note that logs can be found in + <c>/usr/local/erl-target/log</c>. This directory is specified as + an argument to <c>run_erl</c>in the start script listed above. + </p> + <p> + <em>Step 1.</em> Unpack the release: + </p> + <pre> +1> <input>{ok,Vsn} = release_handler:unpack_release("mysystem2").</input></pre> + <p> + <em>Step 2.</em> Install the release: + </p> + <pre> +2> <input>release_handler:install_release(Vsn).</input> +<output>{continue_after_restart,"FIRST",[]} +heart: Tue Apr 1 12:15:10 2014: Erlang has closed. +heart: Tue Apr 1 12:15:11 2014: Executed "/usr/local/erl-target/bin/start /usr/local/erl-target/releases/new_start_erl.data" -> 0. Terminating. +[End]</output></pre> + <p> + The above return value and output after the call to + <c>release_handler:install_release/1</c> means that the + <c>release_handler</c> has restarted the node by using + <c>heart</c>. This will always be done when the upgrade involves + a change of <c>erts</c>, <c>kernel</c>, <c>stdlib</c> or + <c>sasl</c>. See <seealso marker="upgrade">Upgrade when + Erlang/OTP has Changed</seealso> for more infomation about this. + </p> + <p> + The node will be accessable via a new pipe: + </p> + <pre> +os> <input>/usr/local/erl-target/bin/to_erl /tmp/erlang.pipe.2</input></pre> + <p> + Let's see which releases we have in our system: + </p> + <pre> +1> <input>release_handler:which_releases().</input> +<output>[{"MYSYSTEM","SECOND", + ["kernel-3.0","stdlib-2.0","sasl-2.4","pea-2.0"], + current}, + {"MYSYSTEM","FIRST", + ["kernel-2.16.4","stdlib-1.19.4","sasl-2.3.4","pea-1.0"], + permanent}]</output></pre> + <p> + Our new release, "SECOND", is now the current release, but we + can also see that our "FIRST" release is still permanent. This + means that if the node would be restarted at this point, it + would come up running the "FIRST" release again. + </p> + <p> + <em>Step 3.</em> Make the new release permanent: + </p> + <pre> +2> <input>release_handler:make_permanent("SECOND").</input></pre> + + <p> + Now look at the releases again: + </p> + + <pre> +3> <input>release_handler:which_releases().</input> +<output>[{"MYSYSTEM","SECOND", + ["kernel-3.0","stdlib-2.0","sasl-2.4","pea-2.0"], + permanent}, + {"MYSYSTEM","FIRST", + ["kernel-2.16.4","stdlib-1.19.4","sasl-2.3.4","pea-1.0"], + old}]</output></pre> + + <p> + Here we see that the new release version is <c>permanent</c>, so + it would be safe to restart the node. + </p> + + </section> + + <section> <title>Listing of target_system.erl</title> <p>This module can also be found in the <c>examples</c> directory of the <c>sasl</c> application.</p> |