diff options
Diffstat (limited to 'system')
66 files changed, 1956 insertions, 908 deletions
diff --git a/system/COPYRIGHT b/system/COPYRIGHT index 5d47e0ca38..91cf0bbfb3 100644 --- a/system/COPYRIGHT +++ b/system/COPYRIGHT @@ -5,7 +5,7 @@ This software is subject to the following Copyrights and Licenses: %CopyrightBegin% -Copyright Ericsson AB 1997-2017. All Rights Reserved. +Copyright Ericsson AB 1997-2018. All Rights Reserved. Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. @@ -41,12 +41,15 @@ PCRE LICENCE PCRE is a library of functions to support regular expressions whose syntax and semantics are as close as possible to those of the Perl 5 language. -Release 7 of PCRE is distributed under the terms of the "BSD" licence, as +Release 8 of PCRE is distributed under the terms of the "BSD" licence, as specified below. The documentation for PCRE, supplied in the "doc" -directory, is distributed under the same terms as the software itself. +directory, is distributed under the same terms as the software itself. The data +in the testdata directory is not copyrighted and is in the public domain. The basic library functions are written in C and are freestanding. Also -included in the distribution is a set of C++ wrapper functions. +included in the distribution is a set of C++ wrapper functions, and a +just-in-time compiler that can be used to optimize pattern matching. These +are both optional features that can be omitted when the library is built. THE BASIC LIBRARY FUNCTIONS @@ -59,7 +62,29 @@ Email domain: cam.ac.uk University of Cambridge Computing Service, Cambridge, England. -Copyright (c) 1997-2008 University of Cambridge +Copyright (c) 1997-2018 University of Cambridge +All rights reserved. + + +PCRE JUST-IN-TIME COMPILATION SUPPORT +------------------------------------- + +Written by: Zoltan Herczeg +Email local part: hzmester +Emain domain: freemail.hu + +Copyright(c) 2010-2018 Zoltan Herczeg +All rights reserved. + + +STACK-LESS JUST-IN-TIME COMPILER +-------------------------------- + +Written by: Zoltan Herczeg +Email local part: hzmester +Emain domain: freemail.hu + +Copyright(c) 2009-2018 Zoltan Herczeg All rights reserved. @@ -68,7 +93,7 @@ THE C++ WRAPPER FUNCTIONS Contributed by: Google Inc. -Copyright (c) 2007-2008, Google Inc. +Copyright (c) 2007-2012, Google Inc. All rights reserved. diff --git a/system/doc/design_principles/Makefile b/system/doc/design_principles/Makefile index 1465f430a5..2fbd7d087f 100644 --- a/system/doc/design_principles/Makefile +++ b/system/doc/design_principles/Makefile @@ -1,7 +1,7 @@ # # %CopyrightBegin% # -# Copyright Ericsson AB 1997-2016. All Rights Reserved. +# Copyright Ericsson AB 1997-2018. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -18,6 +18,7 @@ # %CopyrightEnd% # # + include $(ERL_TOP)/make/target.mk include $(ERL_TOP)/make/$(TARGET)/otp.mk @@ -27,6 +28,8 @@ include $(ERL_TOP)/make/$(TARGET)/otp.mk include $(ERL_TOP)/erts/vsn.mk APPLICATION=otp-system-documentation +XMLDIR := $(XMLDIR)/design_principles + # ---------------------------------------------------- # Release directory specification # ---------------------------------------------------- @@ -57,11 +60,11 @@ GIF_FILES = \ sup5.gif \ sup6.gif -PNG_FILES = \ - code_lock.png \ - code_lock_2.png +SVG_FILES = \ + code_lock.svg \ + code_lock_2.svg -IMAGE_FILES = $(GIF_FILES) $(PNG_FILES) +IMAGE_FILES = $(GIF_FILES) $(SVG_FILES) XML_FILES = \ $(BOOK_FILES) $(XML_CHAPTER_FILES) \ @@ -89,7 +92,7 @@ DVIPS_FLAGS += $(HTMLDIR)/%.gif: %.gif $(INSTALL_DATA) $< $@ -$(HTMLDIR)/%.png: %.png +$(HTMLDIR)/%.svg: %.svg $(INSTALL_DATA) $< $@ docs: html @@ -103,6 +106,7 @@ images: $(IMAGE_FILES:%=$(HTMLDIR)/%) debug opt: clean clean_docs: + rm -f $(XMLDIR)/*.xml rm -f $(HTMLDIR)/*.gif $(HTMLDIR)/*.html rm -f $(TOP_PDF_FILE) $(TOP_PDF_FILE:%.pdf=%.fo) rm -f errs core *~ diff --git a/system/doc/design_principles/applications.xml b/system/doc/design_principles/applications.xml index c673fde07e..3b7b8fdaee 100644 --- a/system/doc/design_principles/applications.xml +++ b/system/doc/design_principles/applications.xml @@ -4,7 +4,7 @@ <chapter> <header> <copyright> - <year>1997</year><year>2016</year> + <year>1997</year><year>2018</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -363,9 +363,13 @@ ok application are running.</p> <marker id="application_master"></marker> <p>The application controller then creates an - <em>application master</em> for the application. The application master - is the group leader of all the processes in the application. - The application master starts the application by calling + <em>application master</em> for the application. The application + master becomes the group leader of all the processes in the + application. I/O is forwarded to the previous group leader, + though, this is just a way to identify processes that belong to + the application. Used for example to find itself from any process, + or, reciprocally, to kill them all when it terminates.</p> + <p>The application master starts the application by calling the application callback function <c>start/2</c> in the module, and with the start argument, defined by the <c>mod</c> key in the <c>.app</c> file.</p> diff --git a/system/doc/design_principles/code_lock.dia b/system/doc/design_principles/code_lock.dia Binary files differindex eaa2aca5b0..fe43d6da2c 100644 --- a/system/doc/design_principles/code_lock.dia +++ b/system/doc/design_principles/code_lock.dia diff --git a/system/doc/design_principles/code_lock.png b/system/doc/design_principles/code_lock.png Binary files differdeleted file mode 100644 index 40bd35fc74..0000000000 --- a/system/doc/design_principles/code_lock.png +++ /dev/null diff --git a/system/doc/design_principles/code_lock.svg b/system/doc/design_principles/code_lock.svg new file mode 100644 index 0000000000..223e121486 --- /dev/null +++ b/system/doc/design_principles/code_lock.svg @@ -0,0 +1,132 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.0//EN" "http://www.w3.org/TR/2001/PR-SVG-20010719/DTD/svg10.dtd"> +<svg width="41cm" height="52cm" viewBox="-2 -2 806 1023" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink"> + <polyline style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="492.782,860 600,860 600,900 "/> + <polyline style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="380,900 380,900 380,931.6 "/> + <polyline style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="640,560 640,580 640,580 640,600 "/> + <polyline style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="492.782,300 640,300 640,340 "/> + <g> + <path style="fill: #d5d5f7" d="M 289.774 260 L 470.226,260 C 492.782,276 500,284 500,300 C 500,316 492.782,324 470.226,340 L 289.774,340 C 267.218,324 260,316 260,300 C 260,284 267.218,276 289.774,260z"/> + <path style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" d="M 289.774 260 L 470.226,260 C 492.782,276 500,284 500,300 C 500,316 492.782,324 470.226,340 L 289.774,340 C 267.218,324 260,316 260,300 C 260,284 267.218,276 289.774,260"/> + <text font-size="27.0933" style="fill: #000000;text-anchor:middle;font-family:sans-serif;font-style:normal;font-weight:700" x="380" y="308.467"> + <tspan x="380" y="308.467">locked</tspan> + </text> + </g> + <g> + <path style="fill: #d5d5f7" d="M 289.774 820 L 470.226,820 C 492.782,836 500,844 500,860 C 500,876 492.782,884 470.226,900 L 289.774,900 C 267.218,884 260,876 260,860 C 260,844 267.218,836 289.774,820z"/> + <path style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" d="M 289.774 820 L 470.226,820 C 492.782,836 500,844 500,860 C 500,876 492.782,884 470.226,900 L 289.774,900 C 267.218,884 260,876 260,860 C 260,844 267.218,836 289.774,820"/> + <text font-size="27.0933" style="fill: #000000;text-anchor:middle;font-family:sans-serif;font-style:normal;font-weight:700" x="380" y="868.467"> + <tspan x="380" y="868.467">open</tspan> + </text> + </g> + <g> + <polygon style="fill: #aad7aa" points="520,340 760,340 736,360 760,380 520,380 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="520,340 760,340 736,360 760,380 520,380 "/> + <text font-size="20.32" style="fill: #000000;text-anchor:start;font-family:sans-serif;font-style:italic;font-weight:normal" x="546" y="366.35"> + <tspan x="546" y="366.35">{button,Button}</tspan> + </text> + </g> + <g> + <polygon style="fill: #f3cccc" points="640,480 800,520 640,560 480,520 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="640,480 800,520 640,560 480,520 "/> + <text font-size="20.32" style="fill: #000000;text-anchor:middle;font-family:sans-serif;font-style:normal;font-weight:normal" x="643.2" y="527.15"> + <tspan x="643.2" y="527.15">Correct Code?</tspan> + </text> + </g> + <g> + <polygon style="fill: #ffff8f" points="0,940 160,940 160,980 0,980 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="0,940 160,940 160,980 0,980 "/> + <text font-size="20.32" style="fill: #000000;text-anchor:middle;font-family:sans-serif;font-style:normal;font-weight:normal" x="80" y="966.35"> + <tspan x="80" y="966.35">do_lock()</tspan> + </text> + </g> + <g> + <polygon style="fill: #aad7aa" points="280,931.6 480,931.6 460,960 480,988.4 280,988.4 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="280,931.6 480,931.6 460,960 480,988.4 280,988.4 "/> + <text font-size="20.32" style="fill: #000000;text-anchor:middle;font-family:sans-serif;font-style:italic;font-weight:normal" x="380" y="966.35"> + <tspan x="380" y="966.35">state_timeout</tspan> + </text> + </g> + <g> + <ellipse style="fill: #d5d5f7" cx="380" cy="40" rx="40" ry="40"/> + <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="380" cy="40" rx="40" ry="40"/> + <text font-size="27.0933" style="fill: #000000;text-anchor:middle;font-family:sans-serif;font-style:normal;font-weight:normal" x="380" y="48.4667"> + <tspan x="380" y="48.4667">init</tspan> + </text> + </g> + <g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="380.719" y1="180" x2="380.087" y2="250.264"/> + <polygon style="fill: #000000" points="380.02,257.764 375.11,247.72 380.087,250.264 385.11,247.809 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="380.02,257.764 375.11,247.72 380.087,250.264 385.11,247.809 "/> + </g> + <g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="640.438" y1="440" x2="640.106" y2="470.265"/> + <polygon style="fill: #000000" points="640.024,477.764 635.134,467.71 640.106,470.265 645.134,467.819 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="640.024,477.764 635.134,467.71 640.106,470.265 645.134,467.819 "/> + </g> + <polyline style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="640,700 640,740 380,740 380,740 "/> + <text font-size="20.32" style="fill: #000000;text-anchor:start;font-family:sans-serif;font-style:normal;font-weight:normal" x="640" y="578.9"> + <tspan x="640" y="578.9">Y</tspan> + </text> + <text font-size="20.32" style="fill: #000000;text-anchor:end;font-family:sans-serif;font-style:normal;font-weight:normal" x="480" y="538.9"> + <tspan x="480" y="538.9">N</tspan> + </text> + <g> + <polyline style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="80,940 80,220 370.623,220 "/> + <polygon style="fill: #000000" points="378.123,220 368.123,225 370.623,220 368.123,215 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="378.123,220 368.123,225 370.623,220 368.123,215 "/> + </g> + <g> + <polygon style="fill: #aad7aa" points="500,900 700,900 680,920 700,940 500,940 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="500,900 700,900 680,920 700,940 500,940 "/> + <text font-size="20.32" style="fill: #000000;text-anchor:start;font-family:sans-serif;font-style:italic;font-weight:normal" x="522" y="926.35"> + <tspan x="522" y="926.35">{button,Digit}</tspan> + </text> + </g> + <g> + <polyline style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="600,940 600,980 760,980 760,780 389.736,780 "/> + <polygon style="fill: #000000" points="382.236,780 392.236,775 389.736,780 392.236,785 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="382.236,780 392.236,775 389.736,780 392.236,785 "/> + </g> + <g> + <polygon style="fill: #ffff8f" points="260,120 501.438,120 501.438,180 260,180 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="260,120 501.438,120 501.438,180 260,180 "/> + <text font-size="20.32" style="fill: #000000;text-anchor:start;font-family:sans-serif;font-style:normal;font-weight:normal" x="286.144" y="143.65"> + <tspan x="286.144" y="143.65">do_lock()</tspan> + <tspan x="286.144" y="169.05">Clear Buttons</tspan> + </text> + </g> + <g> + <polygon style="fill: #ffff8f" points="500,600 780,600 780,700 500,700 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="500,600 780,600 780,700 500,700 "/> + <text font-size="20.32" style="fill: #000000;text-anchor:start;font-family:sans-serif;font-style:normal;font-weight:normal" x="530" y="630.95"> + <tspan x="530" y="630.95">do_unlock()</tspan> + <tspan x="530" y="656.35">Clear Buttons</tspan> + <tspan x="530" y="681.75">state_timeout 10 s</tspan> + </text> + </g> + <g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="380" y1="80" x2="380.544" y2="110.266"/> + <polygon style="fill: #000000" points="380.679,117.764 375.5,107.856 380.544,110.266 385.498,107.676 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="380.679,117.764 375.5,107.856 380.544,110.266 385.498,107.676 "/> + </g> + <g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="380" y1="740" x2="380" y2="810.264"/> + <polygon style="fill: #000000" points="380,817.764 375,807.764 380,810.264 385,807.764 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="380,817.764 375,807.764 380,810.264 385,807.764 "/> + </g> + <polyline style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="380,988.4 380,1020 80,1020 80,980 "/> + <g> + <polygon style="fill: #ffff8f" points="540,400 740.875,400 740.875,440 540,440 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="540,400 740.875,400 740.875,440 540,440 "/> + <text font-size="20.32" style="fill: #000000;text-anchor:middle;font-family:sans-serif;font-style:normal;font-weight:normal" x="640.438" y="426.35"> + <tspan x="640.438" y="426.35">Collect Buttons</tspan> + </text> + </g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="640" y1="380" x2="640.438" y2="400"/> + <g> + <polyline style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="480,520 380,520 380,351 "/> + <polygon style="fill: #000000" points="385,351 380,341 375,351 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="385,351 380,341 375,351 "/> + </g> +</svg> diff --git a/system/doc/design_principles/code_lock_2.dia b/system/doc/design_principles/code_lock_2.dia Binary files differindex 3b9ba554d8..31eb0fb6eb 100644 --- a/system/doc/design_principles/code_lock_2.dia +++ b/system/doc/design_principles/code_lock_2.dia diff --git a/system/doc/design_principles/code_lock_2.png b/system/doc/design_principles/code_lock_2.png Binary files differdeleted file mode 100644 index 3aca9dd5aa..0000000000 --- a/system/doc/design_principles/code_lock_2.png +++ /dev/null diff --git a/system/doc/design_principles/code_lock_2.svg b/system/doc/design_principles/code_lock_2.svg new file mode 100644 index 0000000000..d3e15e7577 --- /dev/null +++ b/system/doc/design_principles/code_lock_2.svg @@ -0,0 +1,140 @@ +<?xml version="1.0" encoding="UTF-8" standalone="no"?> +<!DOCTYPE svg PUBLIC "-//W3C//DTD SVG 1.0//EN" "http://www.w3.org/TR/2001/PR-SVG-20010719/DTD/svg10.dtd"> +<svg width="41cm" height="52cm" viewBox="-1 0 806 1021" xmlns="http://www.w3.org/2000/svg" xmlns:xlink="http://www.w3.org/1999/xlink"> + <polyline style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="380,300.55 380,300 140,300 140,360 "/> + <polyline style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="412.782,900 412.782,900 560,900 560,940 "/> + <g> + <polyline style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="560,980 560,1020 0,1020 0,120.55 370.264,120.55 "/> + <polygon style="fill: #000000" points="377.764,120.55 367.764,125.55 370.264,120.55 367.764,115.55 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="377.764,120.55 367.764,125.55 370.264,120.55 367.764,115.55 "/> + </g> + <polyline style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="640,680 640,720 300,720 300,760 "/> + <polyline style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="492.782,300.55 492.782,300 640,300 640,360 "/> + <g> + <path style="fill: #d5d5f7" d="M 289.774 261.1 L 470.226,261.1 C 492.782,276.88 500,284.77 500,300.55 C 500,316.33 492.782,324.22 470.226,340 L 289.774,340 C 267.218,324.22 260,316.33 260,300.55 C 260,284.77 267.218,276.88 289.774,261.1z"/> + <path style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" d="M 289.774 261.1 L 470.226,261.1 C 492.782,276.88 500,284.77 500,300.55 C 500,316.33 492.782,324.22 470.226,340 L 289.774,340 C 267.218,324.22 260,316.33 260,300.55 C 260,284.77 267.218,276.88 289.774,261.1"/> + <text font-size="27.0933" style="fill: #000000;text-anchor:middle;font-family:sans-serif;font-style:normal;font-weight:700" x="380" y="309.017"> + <tspan x="380" y="309.017">locked</tspan> + </text> + </g> + <g> + <path style="fill: #d5d5f7" d="M 209.774 860 L 390.226,860 C 412.782,876 420,884 420,900 C 420,916 412.782,924 390.226,940 L 209.774,940 C 187.218,924 180,916 180,900 C 180,884 187.218,876 209.774,860z"/> + <path style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" d="M 209.774 860 L 390.226,860 C 412.782,876 420,884 420,900 C 420,916 412.782,924 390.226,940 L 209.774,940 C 187.218,924 180,916 180,900 C 180,884 187.218,876 209.774,860"/> + <text font-size="27.0933" style="fill: #000000;text-anchor:middle;font-family:sans-serif;font-style:normal;font-weight:700" x="300" y="908.467"> + <tspan x="300" y="908.467">open</tspan> + </text> + </g> + <g> + <polygon style="fill: #aad7aa" points="520,360 760,360 736,380 760,400 520,400 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="520,360 760,360 736,380 760,400 520,400 "/> + <text font-size="20.32" style="fill: #000000;text-anchor:start;font-family:sans-serif;font-style:italic;font-weight:normal" x="546" y="386.35"> + <tspan x="546" y="386.35">{button,Button}</tspan> + </text> + </g> + <g> + <polygon style="fill: #ffff8f" points="140,760 460,760 460,816.8 140,816.8 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="140,760 460,760 460,816.8 140,816.8 "/> + <text font-size="20.32" style="fill: #000000;text-anchor:start;font-family:sans-serif;font-style:normal;font-weight:normal" x="174" y="782.05"> + <tspan x="174" y="782.05">do_unlock()</tspan> + <tspan x="174" y="807.45">state_timeout 10 s</tspan> + </text> + </g> + <g> + <polygon style="fill: #ffff8f" points="260,160 500,160 500,222.2 260,222.2 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="260,160 500,160 500,222.2 260,222.2 "/> + <text font-size="20.32" style="fill: #000000;text-anchor:middle;font-family:sans-serif;font-style:normal;font-weight:normal" x="380" y="184.75"> + <tspan x="380" y="184.75">do_lock()</tspan> + <tspan x="380" y="210.15">Clear Buttons</tspan> + </text> + </g> + <g> + <polygon style="fill: #aad7aa" points="460,940 660,940 640,960 660,980 460,980 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="460,940 660,940 640,960 660,980 460,980 "/> + <text font-size="20.32" style="fill: #000000;text-anchor:middle;font-family:sans-serif;font-style:italic;font-weight:normal" x="560" y="966.35"> + <tspan x="560" y="966.35">state_timeout</tspan> + </text> + </g> + <g> + <ellipse style="fill: #d5d5f7" cx="380" cy="41.1" rx="40" ry="40"/> + <ellipse style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" cx="380" cy="41.1" rx="40" ry="40"/> + <text font-size="27.0933" style="fill: #000000;text-anchor:middle;font-family:sans-serif;font-style:normal;font-weight:normal" x="380" y="49.5667"> + <tspan x="380" y="49.5667">init</tspan> + </text> + </g> + <g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="380" y1="81.1" x2="380" y2="150.264"/> + <polygon style="fill: #000000" points="380,157.764 375,147.764 380,150.264 385,147.764 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="380,157.764 375,147.764 380,150.264 385,147.764 "/> + </g> + <g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="380" y1="222.2" x2="380" y2="251.364"/> + <polygon style="fill: #000000" points="380,258.864 375,248.864 380,251.364 385,248.864 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="380,258.864 375,248.864 380,251.364 385,248.864 "/> + </g> + <g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="300" y1="816.8" x2="300" y2="850.264"/> + <polygon style="fill: #000000" points="300,857.764 295,847.764 300,850.264 305,847.764 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="300,857.764 295,847.764 300,850.264 305,847.764 "/> + </g> + <g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="380" y1="560" x2="380" y2="349.736"/> + <polygon style="fill: #000000" points="380,342.236 385,352.236 380,349.736 375,352.236 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="380,342.236 385,352.236 380,349.736 375,352.236 "/> + </g> + <g> + <polygon style="fill: #ffff8f" points="240,560 520,560 520,600 240,600 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="240,560 520,560 520,600 240,600 "/> + <text font-size="20.32" style="fill: #000000;text-anchor:middle;font-family:sans-serif;font-style:normal;font-weight:normal" x="380" y="586.35"> + <tspan x="380" y="586.35">state_timeout 30 s</tspan> + </text> + </g> + <g> + <polygon style="fill: #aad7aa" points="40,360 240,360 220,380 240,400 40,400 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="40,360 240,360 220,380 240,400 40,400 "/> + <text font-size="20.32" style="fill: #000000;text-anchor:start;font-family:sans-serif;font-style:italic;font-weight:normal" x="62" y="386.35"> + <tspan x="62" y="386.35">state_timeout</tspan> + </text> + </g> + <g> + <polygon style="fill: #ffff8f" points="540,440 741.438,440 741.438,480 540,480 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="540,440 741.438,440 741.438,480 540,480 "/> + <text font-size="20.32" style="fill: #000000;text-anchor:middle;font-family:sans-serif;font-style:normal;font-weight:normal" x="640.719" y="466.35"> + <tspan x="640.719" y="466.35">Collect Buttons</tspan> + </text> + </g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="640" y1="400" x2="640.719" y2="440"/> + <g> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="640.611" y1="480.995" x2="640.056" y2="589"/> + <polygon style="fill: #000000" points="635.057,588.974 640.005,599 645.056,589.026 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="635.057,588.974 640.005,599 645.056,589.026 "/> + </g> + <g> + <polygon style="fill: #ffff8f" points="40,440 240,440 240,480 40,480 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="40,440 240,440 240,480 40,480 "/> + <text font-size="20.32" style="fill: #000000;text-anchor:middle;font-family:sans-serif;font-style:normal;font-weight:normal" x="140" y="466.35"> + <tspan x="140" y="466.35">Clear Buttons</tspan> + </text> + </g> + <polyline style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="480,640 380,640 380,600 "/> + <line style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" x1="140" y1="400" x2="140" y2="440"/> + <g> + <g> + <polygon style="fill: #f3cccc" points="640,600 800,640 640,680 480,640 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="640,600 800,640 640,680 480,640 "/> + <text font-size="20.32" style="fill: #000000;text-anchor:middle;font-family:sans-serif;font-style:normal;font-weight:normal" x="643.2" y="647.15"> + <tspan x="643.2" y="647.15">Correct Code?</tspan> + </text> + </g> + <text font-size="20.32" style="fill: #000000;text-anchor:end;font-family:sans-serif;font-style:normal;font-weight:normal" x="480" y="658.9"> + <tspan x="480" y="658.9">N</tspan> + </text> + <text font-size="20.32" style="fill: #000000;text-anchor:start;font-family:sans-serif;font-style:normal;font-weight:normal" x="640" y="698.9"> + <tspan x="640" y="698.9">Y</tspan> + </text> + </g> + <g> + <polyline style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="140,480 140,516 369,516 "/> + <polygon style="fill: #000000" points="369,521 379,516 369,511 "/> + <polygon style="fill: none; fill-opacity:0; stroke-width: 2; stroke: #000000" points="369,521 379,516 369,511 "/> + </g> +</svg> diff --git a/system/doc/design_principles/des_princ.xml b/system/doc/design_principles/des_princ.xml index e21f2a7f4e..2bfb8eb3c7 100644 --- a/system/doc/design_principles/des_princ.xml +++ b/system/doc/design_principles/des_princ.xml @@ -4,7 +4,7 @@ <chapter> <header> <copyright> - <year>1997</year><year>2017</year> + <year>1997</year><year>2018</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -64,7 +64,7 @@ the supervisors are similar in structure. The only difference between them is which child processes they supervise. Many of the workers are servers in a server-client relation, - finite-state machines, or event handlers such as error loggers.</p> + finite-state machines, or event handlers.</p> <p><em>Behaviours</em> are formalizations of these common patterns. The idea is to divide the code for a process in a generic part (a behaviour module) and a specific part (a diff --git a/system/doc/design_principles/gen_server_concepts.xml b/system/doc/design_principles/gen_server_concepts.xml index c1b98189d5..06413a3d93 100644 --- a/system/doc/design_principles/gen_server_concepts.xml +++ b/system/doc/design_principles/gen_server_concepts.xml @@ -4,7 +4,7 @@ <chapter> <header> <copyright> - <year>1997</year><year>2016</year> + <year>1997</year><year>2018</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -32,7 +32,7 @@ <marker id="gen_server"></marker> <p>This section is to be read with the <seealso marker="stdlib:gen_server">gen_server(3)</seealso> - manual page in <c>stdblib</c>, where all interface functions and + manual page in <c>stdlib</c>, where all interface functions and callback functions are described in detail.</p> <section> diff --git a/system/doc/design_principles/release_structure.xml b/system/doc/design_principles/release_structure.xml index a0ab21c43f..e8dfcad805 100644 --- a/system/doc/design_principles/release_structure.xml +++ b/system/doc/design_principles/release_structure.xml @@ -4,7 +4,7 @@ <chapter> <header> <copyright> - <year>2003</year><year>2016</year> + <year>2003</year><year>2018</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -208,8 +208,8 @@ releases/ch_rel-1.rel</pre> is therefore now instead duplicated in the tar file so no manual copying is necessary.</p> <p>If a <c>relup</c> file and/or a system configuration file called - <c>sys.config</c> is found, these files are also included in - the release package. See + <c>sys.config</c>, or a <c>sys.config.src</c>, is found, these files + are also included in the release package. See <seealso marker="release_handling#req">Release Handling</seealso>.</p> <p>Options can be set to make the release package include source code and the ERTS binary as well.</p> @@ -240,7 +240,7 @@ $ROOT/lib/App1-AVsn1/ebin <item><c>erts-EVsn/bin</c> - Erlang runtime system executables</item> <item><c>releases/Vsn</c> - <c>.rel</c> file and boot script <c>start.boot</c>; if present in the release package, <c>relup</c> - and/or <c>sys.config</c></item> + and/or <c>sys.config</c> or <c>sys.config.src</c></item> <item><c>bin</c> - Top-level Erlang runtime system executables</item> </list> <p>Applications are not required to be located under directory diff --git a/system/doc/design_principles/spec_proc.xml b/system/doc/design_principles/spec_proc.xml index 5f4e7ac685..65f5492bdd 100644 --- a/system/doc/design_principles/spec_proc.xml +++ b/system/doc/design_principles/spec_proc.xml @@ -4,7 +4,7 @@ <chapter> <header> <copyright> - <year>1997</year><year>2017</year> + <year>1997</year><year>2018</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -312,7 +312,7 @@ sys:handle_debug(Deb, Func, Info, Event) => Deb1</code> define what a system event is and how it is to be represented. Typically at least incoming and outgoing messages are considered system events and represented by - the tuples <c>{in,Msg[,From]}</c> and <c>{out,Msg,To}</c>, + the tuples <c>{in,Msg[,From]}</c> and <c>{out,Msg,To[,State]}</c>, respectively.</item> </list> <p><c>handle_debug</c> returns an updated debug structure diff --git a/system/doc/design_principles/statem.xml b/system/doc/design_principles/statem.xml index 1006485e30..16a901b3a5 100644 --- a/system/doc/design_principles/statem.xml +++ b/system/doc/design_principles/statem.xml @@ -4,7 +4,7 @@ <chapter> <header> <copyright> - <year>2016</year><year>2017</year> + <year>2016</year><year>2018</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -36,16 +36,6 @@ manual page in STDLIB, where all interface functions and callback functions are described in detail. </p> - <note> - <p> - This is a new behavior in Erlang/OTP 19.0. - It has been thoroughly reviewed, is stable enough - to be used by at least two heavy OTP applications, and is here to stay. - Depending on user feedback, we do not expect - but can find it necessary to make minor - not backward compatible changes into Erlang/OTP 20.0. - </p> - </note> <!-- =================================================================== --> @@ -72,13 +62,14 @@ State(S) x Event(E) -> Actions(A), State(S')</pre> <p>These relations are interpreted as follows: if we are in state <c>S</c> and event <c>E</c> occurs, we are to perform actions <c>A</c> and make a transition to - state <c>S'</c>. Notice that <c>S'</c> can be equal to <c>S</c>. + state <c>S'</c>. Notice that <c>S'</c> can be equal to <c>S</c> + and that <c>A</c> can be empty. </p> <p> As <c>A</c> and <c>S'</c> depend only on <c>S</c> and <c>E</c>, the kind of state machine described - here is a Mealy Machine - (see, for example, the corresponding Wikipedia article). + here is a Mealy machine + (see, for example, the Wikipedia article "Mealy machine"). </p> <p> Like most <c>gen_</c> behaviors, <c>gen_statem</c> keeps @@ -88,7 +79,95 @@ State(S) x Event(E) -> Actions(A), State(S')</pre> or on the number of distinct input events, a state machine implemented with this behavior is in fact Turing complete. - But it feels mostly like an Event-Driven Mealy Machine. + But it feels mostly like an Event-Driven Mealy machine. + </p> + </section> + +<!-- =================================================================== --> + + <section> + <marker id="When to use gen_statem" /> + <title>When to use gen_statem</title> + <p> + If your process logic is convenient to describe as a state machine, + and you want any of these <c>gen_statem</c> key features: + </p> + <list type="bulleted"> + <item> + Co-located callback code for each state, + regardless of + <seealso marker="#Event Types">Event Type</seealso> + (such as <em>call</em>, <em>cast</em> and <em>info</em>) + </item> + <item> + <seealso marker="#Postponing Events"> + Postponing Events + </seealso> + (a substitute for selective receive) + </item> + <item> + <seealso marker="#Inserted Events"> + Inserted Events + </seealso> + that is: events from the state machine to itself + (in particular purely internal events) + </item> + <item> + <seealso marker="#State Enter Calls"> + State Enter Calls + </seealso> + (callback on state entry co-located with the rest + of each state's callback code) + </item> + <item> + Easy-to-use timeouts + (<seealso marker="#State Time-Outs">State Time-Outs</seealso>, + <seealso marker="#Event Time-Outs">Event Time-Outs</seealso> + and + <seealso marker="#Generic Time-Outs">Generic Time-outs</seealso> + (named time-outs)) + </item> + </list> + <p> + If so, or if possibly needed in future versions, + then you should consider using <c>gen_statem</c> over + <seealso marker="stdlib:gen_server"><c>gen_server</c></seealso>. + </p> + <p> + For simple state machines not needing these features + <seealso marker="stdlib:gen_server"><c>gen_server</c></seealso> + works just fine. + It also has got smaller call overhead, + but we are talking about something like 2 vs 3.3 microseconds + call roundtrip time here, so if the server callback + does just a little bit more than just replying, + or if the call is not extremely frequent, + that difference will be hard to notice. + </p> + </section> + +<!-- =================================================================== --> + + <section> + <marker id="Callback Module" /> + <title>Callback Module</title> + <p> + The callback module contains functions that implement + the state machine. + When an event occurs, + the <c>gen_statem</c> behaviour engine + calls a function in the callback module with the event, + current state and server data. + This function performs the actions for this event, + and returns the new state and server data + and also actions to be performed by the behaviour engine. + </p> + <p> + The behaviour engine holds the state machine state, + server data, timer references, a queue of posponed messages + and other metadata. It receives all process messages, + handles the system messages, and calls the callback module + with machine specific events. </p> </section> @@ -100,61 +179,72 @@ State(S) x Event(E) -> Actions(A), State(S')</pre> <p> The <c>gen_statem</c> behavior supports two callback modes: </p> - <list type="bulleted"> + <taglist> + <tag> + <seealso marker="stdlib:gen_statem#type-callback_mode"> + <c>state_functions</c> + </seealso> + </tag> <item> <p> - In mode - <seealso marker="stdlib:gen_statem#type-callback_mode"><c>state_functions</c></seealso>, - the state transition rules are written as some Erlang - functions, which conform to the following convention: - </p> - <pre> -StateName(EventType, EventContent, Data) -> - ... code for actions here ... - {next_state, NewStateName, NewData}. - </pre> - <p> - This form is used in most examples here for example in section - <seealso marker="#Example">Example</seealso>. + Events are handled by one callback function per state. </p> </item> + <tag> + <seealso marker="stdlib:gen_statem#type-callback_mode"> + <c>handle_event_function</c> + </seealso> + </tag> <item> <p> - In mode - <seealso marker="stdlib:gen_statem#type-callback_mode"><c>handle_event_function</c></seealso>, - only one Erlang function provides all state transition rules: - </p> - <pre> -handle_event(EventType, EventContent, State, Data) -> - ... code for actions here ... - {next_state, NewState, NewData} - </pre> - <p> - See section - <seealso marker="#One Event Handler">One Event Handler</seealso> - for an example. + Events are handled by one single callback function. </p> </item> - </list> + </taglist> + <p> + The callback mode is selected at server start + and may be changed with a code upgrade/downgrade. + </p> + <p> + See the section + <seealso marker="#Event Handler">Event Handler</seealso> + that describes the event handling callback function(s). + </p> <p> - Both these modes allow other return tuples; see - <seealso marker="stdlib:gen_statem#Module:StateName/3"><c>Module:StateName/3</c></seealso> - in the <c>gen_statem</c> manual page. - These other return tuples can, for example, stop the machine, - execute state transition actions on the machine engine itself, - and send replies. + The callback mode is selected by implementing + a mandatory callback function + <seealso marker="stdlib:gen_statem#Module:callback_mode/0"> + <c>Module:callback_mode()</c> + </seealso> + that returns one of the callback modes. + </p> + <p> + The + <seealso marker="stdlib:gen_statem#Module:callback_mode/0"> + <c>Module:callback_mode()</c> + </seealso> + function may also return a list containing the callback mode + and the atom <c>state_enter</c> in which case + <seealso marker="#State Enter Calls">State Enter Calls</seealso> + are activated for the callback mode. </p> <section> <marker id="Choosing the Callback Mode" /> <title>Choosing the Callback Mode</title> <p> + The short version: choose <c>state_functions</c> - + it is the one most like <c>gen_fsm</c>. + But if you do not want the restriction that the state + must be an atom, or if you do not want to write + one event handler function per state; please read on... + </p> + <p> The two - <seealso marker="#Callback Modes">callback modes</seealso> - give different possibilities - and restrictions, but one goal remains: - you want to handle all possible combinations of - events and states. + <seealso marker="#Callback Modes">Callback Modes</seealso> + give different possibilities and restrictions, + with one common goal: + to handle all possible combinations of events and states. </p> <p> This can be done, for example, by focusing on one state at the time @@ -167,7 +257,7 @@ handle_event(EventType, EventContent, State, Data) -> With <c>state_functions</c>, you are restricted to use atom-only states, and the <c>gen_statem</c> engine branches depending on state name for you. - This encourages the callback module to gather + This encourages the callback module to co-locate the implementation of all event actions particular to one state in the same place in the code, hence to focus on one state at the time. @@ -186,13 +276,17 @@ handle_event(EventType, EventContent, State, Data) -> This mode works equally well when you want to focus on one event at the time or on one state at the time, but function - <seealso marker="stdlib:gen_statem#Module:handle_event/4"><c>Module:handle_event/4</c></seealso> + <seealso marker="stdlib:gen_statem#Module:handle_event/4"> + <c>Module:handle_event/4</c> + </seealso> quickly grows too large to handle without branching to helper functions. </p> <p> The mode enables the use of non-atom states, for example, complex states or even hierarchical states. + See section + <seealso marker="#Complex State">Complex State</seealso>. If, for example, a state diagram is largely alike for the client side and the server side of a protocol, you can have a state <c>{StateName,server}</c> or @@ -208,43 +302,180 @@ handle_event(EventType, EventContent, State, Data) -> <!-- =================================================================== --> <section> - <marker id="State Enter Calls" /> - <title>State Enter Calls</title> + <marker id="Event Handler" /> + <title>Event Handler</title> <p> - The <c>gen_statem</c> behavior can regardless of callback mode - automatically - <seealso marker="stdlib:gen_statem#type-state_enter"> - call the state callback - </seealso> - with special arguments whenever the state changes - so you can write state entry actions - near the rest of the state transition rules. - It typically looks like this: + Which callback function that handles an event + depends on the callback mode: </p> - <pre> -StateName(enter, _OldState, Data) -> - ... code for state entry actions here ... - {keep_state, NewData}; -StateName(EventType, EventContent, Data) -> - ... code for actions here ... - {next_state, NewStateName, NewData}.</pre> + <taglist> + <tag><c>state_functions</c></tag> + <item> + The event is handled by:<br /> + <seealso marker="stdlib:gen_statem#Module:StateName/3"> + <c>Module:StateName(EventType, EventContent, Data)</c> + </seealso> + <p> + This form is the one mostly used in the + <seealso marker="#Example">Example</seealso> + section. + </p> + </item> + <tag><c>handle_event_function</c></tag> + <item> + The event is handled by:<br /> + <seealso marker="stdlib:gen_statem#Module:handle_event/4"> + <c>Module:handle_event(EventType, EventContent, State, Data)</c> + </seealso> + <p> + See section + <seealso marker="#One Event Handler">One Event Handler</seealso> + for an example. + </p> + </item> + </taglist> <p> - Depending on how your state machine is specified, - this can be a very useful feature, - but it forces you to handle the state enter calls in all states. - See also the - <seealso marker="#State Entry Actions"> - State Entry Actions + The state is either the name of the function itself or an argument to it. + The other arguments are the <c>EventType</c> described in section + <seealso marker="#Event Types">Event Types</seealso>, + the event dependent <c>EventContent</c>, and the current server <c>Data</c>. + </p> + <p> + State enter calls are also handled by the event handler and have + slightly different arguments. See the section + <seealso marker="#State Enter Calls">State Enter Calls</seealso>. + </p> + <p> + The event handler return values are defined in the description of + <seealso marker="stdlib:gen_statem#Module:StateName/3"> + <c>Module:StateName/3</c> </seealso> - chapter. + in the <c>gen_statem</c> manual page, but here is + a more readable list: </p> + <taglist> + <tag> + <c>{next_state, NextState, NewData, Actions}</c><br /> + <c>{next_state, NextState, NewData}</c> + </tag> + <item> + <p> + Set next state and update the server data. + If the <c>Actions</c> field is used, execute state transition actions. + An empty <c>Actions</c> list is equivalent to not returning the field. + </p> + <p> + See section + <seealso marker="#State Transition Actions"> + State Transition Actions + </seealso> + for a list of possible + state transition actions. + </p> + <p> + If <c>NextState =/= State</c> the state machine changes + to a new state. A + <seealso marker="#State Enter Calls">state enter call</seealso> + is performed if enabled and all + <seealso marker="#Postponing Events">postponed events</seealso> + are retried. + </p> + </item> + <tag> + <c>{keep_state, NewData, Actions}</c><br /> + <c>{keep_state, NewData}</c> + </tag> + <item> + <p> + Same as the <c>next_state</c> values with + <c>NextState =:= State</c>, that is, no state change. + </p> + </item> + <tag> + <c>{keep_state_and_data, Actions}</c><br /> + <c>keep_state_and_data</c> + </tag> + <item> + <p> + Same as the <c>keep_state</c> values with + <c>NextData =:= Data</c>, that is, no change in server data. + </p> + </item> + <tag> + <c>{repeat_state, NewData, Actions}</c><br /> + <c>{repeat_state, NewData}</c><br /> + <c>{repeat_state_and_data, Actions}</c><br /> + <c>repeat_state_and_data</c> + </tag> + <item> + <p> + Same as the <c>keep_state</c> or <c>keep_state_and_data</c> values, + and if + <seealso marker="#State Enter Calls"> + State Enter Calls + </seealso> + are enabled, repeat the state enter call + as if this state was entered again. + </p> + </item> + <tag> + <c>{stop, Reason, NewData}</c><br /> + <c>{stop, Reason}</c> + </tag> + <item> + <p> + Stop the server with reason <c>Reason</c>. + If the <c>NewData</c> field is used, first update the server data. + </p> + </item> + <tag> + <c>{stop_and_reply, Reason, NewData, ReplyActions}</c><br /> + <c>{stop_and_reply, Reason, ReplyActions}</c> + </tag> + <item> + <p> + Same as the <c>stop</c> values, but first execute the given + state transition actions that may only be reply actions. + </p> + </item> + </taglist> + + <section> + <marker id="The First State" /> + <title>The First State</title> + <p> + To decide the first state the + <seealso marker="stdlib:gen_statem#Module:init/1"> + <c>Module:init(Args)</c> + </seealso> + callback function is called before any + <seealso marker="#Event Handler">Event Handler</seealso> + is called. This function behaves like an event handler + function, but gets its only argument <c>Args</c> from + the <c>gen_statem</c> + <seealso marker="stdlib:gen_statem#start/3"> + <c>start/3,4</c> + </seealso> + or + <seealso marker="stdlib:gen_statem#start_link/3"> + <c>start_link/3,4</c> + </seealso> + function, and returns <c>{ok, State, Data}</c> + or <c>{ok, State, Data, Actions}</c>. + If you use the + <seealso marker="#Postponing Events"><c>postpone</c></seealso> + action from this function, that action is ignored, + since there is no event to postpone. + </p> + </section> + </section> <!-- =================================================================== --> <section> - <marker id="Actions" /> - <title>Actions</title> + <marker id="State Transition Actions" /> + <title>State Transition Actions</title> <p> In the first section <seealso marker="#Event-Driven State Machines"> @@ -259,77 +490,102 @@ StateName(EventType, EventContent, Data) -> </p> <p> There are more specific state-transition actions - that a callback function can order the <c>gen_statem</c> + that a callback function can command the <c>gen_statem</c> engine to do after the callback function return. - These are ordered by returning a list of + These are commanded by returning a list of <seealso marker="stdlib:gen_statem#type-action">actions</seealso> in the - <seealso marker="stdlib:gen_statem#type-state_callback_result">return tuple</seealso> + <seealso marker="stdlib:gen_statem#type-state_callback_result"> + return value + </seealso> from the <seealso marker="stdlib:gen_statem#Module:StateName/3">callback function</seealso>. - These state transition actions affect the <c>gen_statem</c> - engine itself and can do the following: + These are the possible state transition actions: </p> - <list type="bulleted"> - <item> + <taglist> + <tag> <seealso marker="stdlib:gen_statem#type-postpone"> - Postpone + <c>postpone</c> </seealso> - the current event, see section + <br /> + <c>{postpone, Boolean}</c> + </tag> + <item> + If set postpone the current event, see section <seealso marker="#Postponing Events">Postponing Events</seealso> </item> - <item> + <tag> <seealso marker="stdlib:gen_statem#type-hibernate"> - Hibernate + <c>hibernate</c> </seealso> - the <c>gen_statem</c>, treated in + <br /> + <c>{hibernate, Boolean}</c> + </tag> + <item> + If set hibernate the <c>gen_statem</c>, treated in section <seealso marker="#Hibernation">Hibernation</seealso> </item> - <item> - Start a + <tag> <seealso marker="stdlib:gen_statem#type-state_timeout"> - state time-out</seealso>, - read more in section + <c>{state_timeout, Time}</c> + </seealso> + <br /> + <c>{state_timeout, Time, Opts}</c> + </tag> + <item> + Start a state time-out, read more in section <seealso marker="#State Time-Outs">State Time-Outs</seealso> </item> - <item> - Start a + <tag> <seealso marker="stdlib:gen_statem#type-generic_timeout"> - generic time-out</seealso>, - read more in section + <c>{{timeout, Name}, Time}</c> + </seealso> + <br /> + <c>{{timeout, Name}, Time, Opts}</c> + </tag> + <item> + Start a generic time-out, read more in section <seealso marker="#Generic Time-Outs">Generic Time-Outs</seealso> </item> + <tag> + <seealso marker="stdlib:gen_statem#type-event_timeout"> + <c>{timeout, Time}</c> + </seealso> + <br /> + <c>{timeout, Time, Opts}</c><br /> + <c>Time</c> + </tag> <item> - Start an - <seealso marker="stdlib:gen_statem#type-event_timeout">event time-out</seealso>, - see more in section + Start an event time-out, see more in section <seealso marker="#Event Time-Outs">Event Time-Outs</seealso> </item> - <item> + <tag> <seealso marker="stdlib:gen_statem#type-reply_action"> - Reply + <c>{reply, From, Reply}</c> </seealso> - to a caller, mentioned at the end of section + </tag> + <item> + Reply to a caller, mentioned at the end of section <seealso marker="#All State Events">All State Events</seealso> </item> - <item> - Generate the + <tag> <seealso marker="stdlib:gen_statem#type-action"> - next event + <c>{next_event, EventType, EventContent}</c> </seealso> - to handle, see section - <seealso marker="#Self-Generated Events">Self-Generated Events</seealso> + </tag> + <item> + Generate the next event to handle, see section + <seealso marker="#Inserted Events">Inserted Events</seealso> </item> - </list> + </taglist> <p> - For details, see the - <seealso marker="stdlib:gen_statem#type-action"> - <c>gen_statem(3)</c> - </seealso> - manual page. + For details, see the <c>gen_statem(3)</c> + manual page for type + <seealso marker="stdlib:gen_statem#type-action"><c>action()</c></seealso>. You can, for example, reply to many callers, generate multiple next events, - and set time-outs to relative or absolute times. + and set a time-out to use absolute instead of relative time + (using the <c>Opts</c> field). </p> </section> @@ -341,8 +597,8 @@ StateName(EventType, EventContent, Data) -> <p> Events are categorized in different <seealso marker="stdlib:gen_statem#type-event_type">event types</seealso>. - Events of all types are handled in the same callback function, - for a given state, and the function gets + Events of all types are for a given state + handled in the same callback function, and that function gets <c>EventType</c> and <c>EventContent</c> as arguments. </p> <p> @@ -350,12 +606,20 @@ StateName(EventType, EventContent, Data) -> they come from: </p> <taglist> - <tag><c>cast</c></tag> + <tag> + <seealso marker="stdlib:gen_statem#type-external_event_type"> + <c>cast</c> + </seealso> + </tag> <item> Generated by <seealso marker="stdlib:gen_statem#cast/2"><c>gen_statem:cast</c></seealso>. </item> - <tag><c>{call,From}</c></tag> + <tag> + <seealso marker="stdlib:gen_statem#type-external_event_type"> + <c>{call,From}</c> + </seealso> + </tag> <item> Generated by <seealso marker="stdlib:gen_statem#call/2"><c>gen_statem:call</c></seealso>, @@ -364,12 +628,20 @@ StateName(EventType, EventContent, Data) -> <c>{reply,From,Msg}</c> or by calling <seealso marker="stdlib:gen_statem#reply/1"><c>gen_statem:reply</c></seealso>. </item> - <tag><c>info</c></tag> + <tag> + <seealso marker="stdlib:gen_statem#type-external_event_type"> + <c>info</c> + </seealso> + </tag> <item> Generated by any regular process message sent to the <c>gen_statem</c> process. </item> - <tag><c>state_timeout</c></tag> + <tag> + <seealso marker="stdlib:gen_statem#type-timeout_event_type"> + <c>state_timeout</c> + </seealso> + </tag> <item> Generated by state transition action <seealso marker="stdlib:gen_statem#type-state_timeout"> @@ -377,7 +649,11 @@ StateName(EventType, EventContent, Data) -> </seealso> state timer timing out. </item> - <tag><c>{timeout,Name}</c></tag> + <tag> + <seealso marker="stdlib:gen_statem#type-timeout_event_type"> + <c>{timeout,Name}</c> + </seealso> + </tag> <item> Generated by state transition action <seealso marker="stdlib:gen_statem#type-generic_timeout"> @@ -385,7 +661,11 @@ StateName(EventType, EventContent, Data) -> </seealso> generic timer timing out. </item> - <tag><c>timeout</c></tag> + <tag> + <seealso marker="stdlib:gen_statem#type-timeout_event_type"> + <c>timeout</c> + </seealso> + </tag> <item> Generated by state transition action <seealso marker="stdlib:gen_statem#type-event_timeout"> @@ -394,7 +674,11 @@ StateName(EventType, EventContent, Data) -> (or its short form <c>Time</c>) event timer timing out. </item> - <tag><c>internal</c></tag> + <tag> + <seealso marker="stdlib:gen_statem#type-event_type"> + <c>internal</c> + </seealso> + </tag> <item> Generated by state transition <seealso marker="stdlib:gen_statem#type-action">action</seealso> @@ -408,19 +692,75 @@ StateName(EventType, EventContent, Data) -> <!-- =================================================================== --> <section> + <marker id="State Enter Calls" /> + <title>State Enter Calls</title> + <p> + The <c>gen_statem</c> behavior can if this is enabled, + regardless of callback mode, + automatically + <seealso marker="stdlib:gen_statem#type-state_enter"> + call the state callback + </seealso> + with special arguments whenever the state changes + so you can write state enter actions + near the rest of the state transition rules. + It typically looks like this: + </p> + <pre> +StateName(enter, OldState, Data) -> + ... code for state enter actions here ... + {keep_state, NewData}; +StateName(EventType, EventContent, Data) -> + ... code for actions here ... + {next_state, NewStateName, NewData}.</pre> + <p> + Since the state enter call is not an event there are restrictions + on the allowed return value and + <seealso marker="#State Transition Actions">State Transition Actions</seealso>. + You may not change the state, + <seealso marker="#Postponing Events">postpone</seealso> + this non-event, or + <seealso marker="#Inserted Events">insert events</seealso>. + </p> + <p> + The first state that is entered will get a state enter call + with <c>OldState</c> equal to the current state. + </p> + <p> + You may repeat the state enter call using the <c>{repeat_state,...}</c> + return value from the + <seealso marker="#Event Handler">Event Handler</seealso>. + In this case <c>OldState</c> will also be equal to the current state. + </p> + <p> + Depending on how your state machine is specified, + this can be a very useful feature, + but it forces you to handle the state enter calls in all states. + See also the + <seealso marker="#State Enter Actions"> + State Enter Actions + </seealso> + chapter. + </p> + </section> + +<!-- =================================================================== --> + + <section> <marker id="Example" /> <title>Example</title> <p> A door with a code lock can be seen as a state machine. Initially, the door is locked. When someone presses a button, an event is generated. - Depending on what buttons have been pressed before, - the sequence so far can be correct, incomplete, or wrong. - If correct, the door is unlocked for 10 seconds (10,000 milliseconds). - If incomplete, we wait for another button to be pressed. If - wrong, we start all over, waiting for a new button sequence. - </p> - <image file="../design_principles/code_lock.png"> + The pressed buttons are collected, up to the number of buttons + in the correct code. + If correct, the door is unlocked for 10 seconds. + If not correct, we wait for a new button to be pressed. + </p> + <!-- The image is edited with dia in a .dia file, + then exported to Scalable Vector Graphics. --> + <image file="../design_principles/code_lock.svg" width="80%"> <icaption>Code Lock State Diagram</icaption> </image> <p> @@ -434,43 +774,51 @@ StateName(EventType, EventContent, Data) -> -export([start_link/1]). -export([button/1]). --export([init/1,callback_mode/0,terminate/3,code_change/4]). +-export([init/1,callback_mode/0,terminate/3]). -export([locked/3,open/3]). start_link(Code) -> gen_statem:start_link({local,?NAME}, ?MODULE, Code, []). -button(Digit) -> - gen_statem:cast(?NAME, {button,Digit}). +button(Button) -> + gen_statem:cast(?NAME, {button,Button}). init(Code) -> do_lock(), - Data = #{code => Code, remaining => Code}, + Data = #{code => Code, length => length(Code), buttons => []}, {ok, locked, Data}. callback_mode() -> state_functions. - + ]]></code> + <code type="erl"><![CDATA[ locked( - cast, {button,Digit}, - #{code := Code, remaining := Remaining} = Data) -> - case Remaining of - [Digit] -> + cast, {button,Button}, + #{code := Code, length := Length, buttons := Buttons} = Data) -> + NewButtons = + if + length(Buttons) < Length -> + Buttons; + true -> + tl(Buttons) + end ++ [Button], + if + NewButtons =:= Code -> % Correct do_unlock(), - {next_state, open, Data#{remaining := Code}, - [{state_timeout,10000,lock}]}; - [Digit|Rest] -> % Incomplete - {next_state, locked, Data#{remaining := Rest}}; - _Wrong -> - {next_state, locked, Data#{remaining := Code}} + {next_state, open, Data#{buttons := []}, + [{state_timeout,10000,lock}]}; % Time in milliseconds + true -> % Incomplete | Incorrect + {next_state, locked, Data#{buttons := NewButtons}} end. - + ]]></code> + <code type="erl"><![CDATA[ open(state_timeout, lock, Data) -> do_lock(), {next_state, locked, Data}; open(cast, {button,_}, Data) -> {next_state, open, Data}. - + ]]></code> + <code type="erl"><![CDATA[ do_lock() -> io:format("Lock~n", []). do_unlock() -> @@ -479,8 +827,6 @@ do_unlock() -> terminate(_Reason, State, _Data) -> State =/= locked andalso do_lock(), ok. -code_change(_Vsn, State, Data, _Extra) -> - {ok, State, Data}. ]]></code> <p>The code is explained in the next sections.</p> </section> @@ -556,17 +902,17 @@ start_link(Code) -> in this case <c>locked</c>; assuming that the door is locked to begin with. <c>Data</c> is the internal server data of the <c>gen_statem</c>. Here the server data is a <seealso marker="stdlib:maps">map</seealso> - with key <c>code</c> that stores - the correct button sequence, and key <c>remaining</c> - that stores the remaining correct button sequence - (the same as the <c>code</c> to begin with). + with key <c>code</c> that stores the correct button sequence, + key <c>length</c> store its length, + and key <c>buttons</c> that stores the collected buttons + up to the same length. </p> <code type="erl"><![CDATA[ init(Code) -> do_lock(), - Data = #{code => Code, remaining => Code}, - {ok,locked,Data}. + Data = #{code => Code, length => length(Code), buttons => []}, + {ok, locked, Data}. ]]></code> <p>Function <seealso marker="stdlib:gen_statem#start_link/3"><c>gen_statem:start_link</c></seealso> @@ -584,10 +930,6 @@ init(Code) -> a <c>gen_statem</c> that is not part of a supervision tree. </p> - <code type="erl"><![CDATA[ -callback_mode() -> - state_functions. - ]]></code> <p> Function <seealso marker="stdlib:gen_statem#Module:callback_mode/0"><c>Module:callback_mode/0</c></seealso> @@ -595,8 +937,12 @@ callback_mode() -> <seealso marker="#Callback Modes"><c>CallbackMode</c></seealso> for the callback module, in this case <seealso marker="stdlib:gen_statem#type-callback_mode"><c>state_functions</c></seealso>. - That is, each state has got its own handler function. + That is, each state has got its own handler function: </p> + <code type="erl"><![CDATA[ +callback_mode() -> + state_functions. + ]]></code> </section> @@ -610,17 +956,17 @@ callback_mode() -> <seealso marker="stdlib:gen_statem#cast/2"><c>gen_statem:cast/2</c></seealso>: </p> <code type="erl"><![CDATA[ -button(Digit) -> - gen_statem:cast(?NAME, {button,Digit}). +button(Button) -> + gen_statem:cast(?NAME, {button,Button}). ]]></code> <p> The first argument is the name of the <c>gen_statem</c> and must agree with the name used to start it. So, we use the same macro <c>?NAME</c> as when starting. - <c>{button,Digit}</c> is the event content. + <c>{button,Button}</c> is the event content. </p> <p> - The event is made into a message and sent to the <c>gen_statem</c>. + The event is sent to the <c>gen_statem</c>. When the event is received, the <c>gen_statem</c> calls <c>StateName(cast, Event, Data)</c>, which is expected to return a tuple <c>{next_state, NewStateName, NewData}</c>, @@ -629,44 +975,48 @@ button(Digit) -> <c>NewStateName</c> is the name of the next state to go to. <c>NewData</c> is a new value for the server data of the <c>gen_statem</c>, and <c>Actions</c> is a list of - actions on the <c>gen_statem</c> engine. + actions to be performed by the <c>gen_statem</c> engine. </p> + <code type="erl"><![CDATA[ locked( - cast, {button,Digit}, - #{code := Code, remaining := Remaining} = Data) -> - case Remaining of - [Digit] -> % Complete + cast, {button,Button}, + #{code := Code, length := Length, buttons := Buttons} = Data) -> + NewButtons = + if + length(Buttons) < Length -> + Buttons; + true -> + tl(Buttons) + end ++ [Button], + if + NewButtons =:= Code -> % Correct do_unlock(), - {next_state, open, Data#{remaining := Code}, - [{state_timeout,10000,lock}]}; - [Digit|Rest] -> % Incomplete - {next_state, locked, Data#{remaining := Rest}}; - [_|_] -> % Wrong - {next_state, locked, Data#{remaining := Code}} + {next_state, open, Data#{buttons := []}, + [{state_timeout,10000,lock}]}; % Time in milliseconds + true -> % Incomplete | Incorrect + {next_state, locked, Data#{buttons := NewButtons}} end. - -open(state_timeout, lock, Data) -> - do_lock(), - {next_state, locked, Data}; -open(cast, {button,_}, Data) -> - {next_state, open, Data}. ]]></code> <p> - If the door is locked and a button is pressed, the pressed - button is compared with the next correct button. + In state <c>locked</c>, when a button is pressed, + it is collected with the last pressed buttons + up to the length of the correct code, + and compared with the correct code. Depending on the result, the door is either unlocked and the <c>gen_statem</c> goes to state <c>open</c>, or the door remains in state <c>locked</c>. </p> <p> - If the pressed button is incorrect, the server data - restarts from the start of the code sequence. - </p> - <p> - If the whole code is correct, the server changes states - to <c>open</c>. + When changing to state <c>open</c>, the collected + buttons are reset, the lock unlocked, and a state timer + for 10 s is started. </p> + + <code type="erl"><![CDATA[ +open(cast, {button,_}, Data) -> + {next_state, open, Data}. + ]]></code> <p> In state <c>open</c>, a button event is ignored by staying in the same state. This can also be done @@ -684,9 +1034,9 @@ open(cast, {button,_}, Data) -> the following tuple is returned from <c>locked/2</c>: </p> <code type="erl"><![CDATA[ -{next_state, open, Data#{remaining := Code}, - [{state_timeout,10000,lock}]}; - ]]></code> +{next_state, open, Data#{buttons := []}, + [{state_timeout,10000,lock}]}; % Time in milliseconds + ]]></code> <p> 10,000 is a time-out value in milliseconds. After this time (10 seconds), a time-out occurs. @@ -721,10 +1071,9 @@ open(state_timeout, lock, Data) -> </p> <p> Consider a <c>code_length/0</c> function that returns - the length of the correct code - (that should not be sensitive to reveal). + the length of the correct code. We dispatch all events that are not state-specific - to the common function <c>handle_event/3</c>: + to the common function <c>handle_common/3</c>: </p> <code type="erl"><![CDATA[ ... @@ -737,16 +1086,46 @@ code_length() -> ... locked(...) -> ... ; locked(EventType, EventContent, Data) -> - handle_event(EventType, EventContent, Data). + handle_common(EventType, EventContent, Data). ... open(...) -> ... ; open(EventType, EventContent, Data) -> - handle_event(EventType, EventContent, Data). + handle_common(EventType, EventContent, Data). -handle_event({call,From}, code_length, #{code := Code} = Data) -> - {keep_state, Data, [{reply,From,length(Code)}]}. +handle_common({call,From}, code_length, #{code := Code} = Data) -> + {keep_state, Data, + [{reply,From,length(Code)}]}. ]]></code> + + <p> + Another way to do it is through a convenience macro + <c>?HANDLE_COMMON/0</c>: + </p> + <code type="erl"><![CDATA[ +... +-export([button/1,code_length/0]). +... + +code_length() -> + gen_statem:call(?NAME, code_length). + +-define(HANDLE_COMMON, + ?FUNCTION_NAME(T, C, D) -> handle_common(T, C, D)). +%% +handle_common({call,From}, code_length, #{code := Code} = Data) -> + {keep_state, Data, + [{reply,From,length(Code)}]}. + +... +locked(...) -> ... ; +?HANDLE_COMMON. + +... +open(...) -> ... ; +?HANDLE_COMMON. +]]></code> + <p> This example uses <seealso marker="stdlib:gen_statem#call/2"><c>gen_statem:call/2</c></seealso>, @@ -757,6 +1136,14 @@ handle_event({call,From}, code_length, #{code := Code} = Data) -> when you want to stay in the current state but do not know or care about what it is. </p> + <p> + If the common event handler needs to know the current state + a function <c>handle_common/4</c> can be used instead: + </p> + <code type="erl"><![CDATA[ +-define(HANDLE_COMMON, + ?FUNCTION_NAME(T, C, D) -> handle_common(T, C, ?FUNCTION_NAME, D)). + ]]></code> </section> <!-- =================================================================== --> @@ -765,7 +1152,11 @@ handle_event({call,From}, code_length, #{code := Code} = Data) -> <marker id="One Event Handler" /> <title>One Event Handler</title> <p> - If mode <c>handle_event_function</c> is used, + If + <seealso marker="#Callback Modes"> + Callback Mode + </seealso> + <c>handle_event_function</c> is used, all events are handled in <seealso marker="stdlib:gen_statem#Module:handle_event/4"><c>Module:handle_event/4</c></seealso> and we can (but do not have to) use an event-centered approach @@ -780,28 +1171,38 @@ handle_event({call,From}, code_length, #{code := Code} = Data) -> callback_mode() -> handle_event_function. -handle_event(cast, {button,Digit}, State, #{code := Code} = Data) -> +handle_event(cast, {button,Button}, State, #{code := Code} = Data) -> case State of locked -> - case maps:get(remaining, Data) of - [Digit] -> % Complete - do_unlock(), - {next_state, open, Data#{remaining := Code}, - [{state_timeout,10000,lock}]}; - [Digit|Rest] -> % Incomplete - {keep_state, Data#{remaining := Rest}}; - [_|_] -> % Wrong - {keep_state, Data#{remaining := Code}} - end; + #{length := Length, buttons := Buttons} = Data, + NewButtons = + if + length(Buttons) < Length -> + Buttons; + true -> + tl(Buttons) + end ++ [Button], + if + NewButtons =:= Code -> % Correct + do_unlock(), + {next_state, open, Data#{buttons := []}, + [{state_timeout,10000,lock}]}; % Time in milliseconds + true -> % Incomplete | Incorrect + {keep_state, Data#{buttons := NewButtons}} + end; open -> keep_state_and_data end; handle_event(state_timeout, lock, open, Data) -> do_lock(), - {next_state, locked, Data}. + {next_state, locked, Data}; +handle_event( + {call,From}, code_length, _State, #{code := Code} = Data) -> + {keep_state, Data, + [{reply,From,length(Code)}]}. ... - ]]></code> +]]></code> </section> <!-- =================================================================== --> @@ -833,7 +1234,7 @@ init(Args) -> process_flag(trap_exit, true), do_lock(), ... - ]]></code> + ]]></code> <p> When ordered to shut down, the <c>gen_statem</c> then calls callback function <c>terminate(shutdown, State, Data)</c>. @@ -847,7 +1248,7 @@ init(Args) -> terminate(_Reason, State, _Data) -> State =/= locked andalso do_lock(), ok. - ]]></code> + ]]></code> </section> <section> @@ -866,7 +1267,7 @@ terminate(_Reason, State, _Data) -> ... stop() -> gen_statem:stop(?NAME). - ]]></code> + ]]></code> <p> This makes the <c>gen_statem</c> call callback function <c>terminate/3</c> just like for a supervised server @@ -889,30 +1290,29 @@ stop() -> </p> <p> It is ordered by the state transition action - <c>{timeout,Time,EventContent}</c>, or just <c>Time</c>, - or even just <c>Time</c> instead of an action list + <c>{timeout,Time,EventContent}</c>, or just an integer <c>Time</c>, + even without the enclosing actions list (the latter is a form inherited from <c>gen_fsm</c>. </p> <p> - This type of time-out is useful to for example act on inactivity. + This type of time-out is useful for example to act on inactivity. Let us restart the code sequence if no button is pressed for say 30 seconds: </p> <code type="erl"><![CDATA[ ... +locked(timeout, _, Data) -> + {next_state, locked, Data#{buttons := []}}; locked( - timeout, _, - #{code := Code, remaining := Remaining} = Data) -> - {next_state, locked, Data#{remaining := Code}}; -locked( - cast, {button,Digit}, - #{code := Code, remaining := Remaining} = Data) -> + cast, {button,Button}, + #{code := Code, length := Length, buttons := Buttons} = Data) -> ... - [Digit|Rest] -> % Incomplete - {next_state, locked, Data#{remaining := Rest}, 30000}; + true -> % Incomplete | Incorrect + {next_state, locked, Data#{buttons := NewButtons}, + 30000} % Time in milliseconds ... - ]]></code> +]]></code> <p> Whenever we receive a button event we start an event time-out of 30 seconds, and if we get an event type <c>timeout</c> @@ -925,6 +1325,13 @@ locked( Whatever event you act on has already cancelled the event time-out... </p> + <p> + Note that an event time-out does not work well with + when you have for example a status call as in + <seealso marker="#All State Events">All State Events</seealso>, + or handle unknown events, since all kinds of events + will cancel the event time-out. + </p> </section> <!-- =================================================================== --> @@ -952,37 +1359,43 @@ locked( <p> Here is how to accomplish the state time-out in the previous example by instead using a generic time-out - named <c>open_tm</c>: + named for example <c>open</c>: </p> <code type="erl"><![CDATA[ ... locked( - cast, {button,Digit}, - #{code := Code, remaining := Remaining} = Data) -> - case Remaining of - [Digit] -> + cast, {button,Button}, + #{code := Code, length := Length, buttons := Buttons} = Data) -> +... + if + NewButtons =:= Code -> % Correct do_unlock(), - {next_state, open, Data#{remaining := Code}, - [{{timeout,open_tm},10000,lock}]}; + {next_state, open, Data#{buttons := []}, + [{{timeout,open},10000,lock}]}; % Time in milliseconds ... -open({timeout,open_tm}, lock, Data) -> +open({timeout,open}, lock, Data) -> do_lock(), {next_state,locked,Data}; open(cast, {button,_}, Data) -> {keep_state,Data}; ... - ]]></code> +]]></code> <p> - Just as - <seealso marker="#State Time-Outs">state time-outs</seealso> - you can restart or cancel a specific generic time-out + Specific generic time-outs can just as + <seealso marker="#State Time-Outs">State Time-Outs</seealso> + be restarted or cancelled by setting it to a new time or <c>infinity</c>. </p> <p> - Another way to handle a late time-out can be to not cancel it, - but to ignore it if it arrives in a state - where it is known to be late. + In this particular case we do not need to cancel the timeout + since the timeout event is the only possible reason to + change the state from <c>open</c> to <c>locked</c>. + </p> + <p> + Instead of bothering with when to cancel a time-out, + a late time-out event can be handled by ignoring it + if it arrives in a state where it is known to be late. </p> </section> @@ -994,7 +1407,7 @@ open(cast, {button,_}, Data) -> <p> The most versatile way to handle time-outs is to use Erlang Timers; see - <seealso marker="erts:erlang#start_timer/4"><c>erlang:start_timer3,4</c></seealso>. + <seealso marker="erts:erlang#start_timer/4"><c>erlang:start_timer/3,4</c></seealso>. Most time-out tasks can be performed with the time-out features in <c>gen_statem</c>, but an example of one that can not is if you should need @@ -1008,13 +1421,16 @@ open(cast, {button,_}, Data) -> <code type="erl"><![CDATA[ ... locked( - cast, {button,Digit}, - #{code := Code, remaining := Remaining} = Data) -> - case Remaining of - [Digit] -> + cast, {button,Button}, + #{code := Code, length := Length, buttons := Buttons} = Data) -> +... + if + NewButtons =:= Code -> % Correct do_unlock(), - Tref = erlang:start_timer(10000, self(), lock), - {next_state, open, Data#{remaining := Code, timer => Tref}}; + Tref = + erlang:start_timer( + 10000, self(), lock), % Time in milliseconds + {next_state, open, Data#{buttons := [], timer => Tref}}; ... open(info, {timeout,Tref,lock}, #{timer := Tref} = Data) -> @@ -1023,7 +1439,7 @@ open(info, {timeout,Tref,lock}, #{timer := Tref} = Data) -> open(cast, {button,_}, Data) -> {keep_state,Data}; ... - ]]></code> +]]></code> <p> Removing the <c>timer</c> key from the map when we change to state <c>locked</c> is not strictly @@ -1063,7 +1479,9 @@ open(cast, {button,_}, Data) -> </p> <p> Postponing is ordered by the state transition - <seealso marker="stdlib:gen_statem#type-action">action</seealso> + <seealso marker="#State Transition Actions"> + State Transition Action + </seealso> <c>postpone</c>. </p> <p> @@ -1076,15 +1494,18 @@ open(cast, {button,_}, Data) -> open(cast, {button,_}, Data) -> {keep_state,Data,[postpone]}; ... - ]]></code> +]]></code> <p> Since a postponed event is only retried after a state change, you have to think about where to keep a state data item. You can keep it in the server <c>Data</c> or in the <c>State</c> itself, for example by having two more or less identical states - to keep a boolean value, or by using a complex state with - <seealso marker="#Callback Modes">callback mode</seealso> + to keep a boolean value, or by using a complex state + (see section + <seealso marker="#Complex State">Complex State</seealso>) + with + <seealso marker="#Callback Modes">Callback Mode</seealso> <seealso marker="stdlib:gen_statem#type-callback_mode"><c>handle_event_function</c></seealso>. If a change in the value changes the set of events that is handled, then the value should be kept in the State. @@ -1134,28 +1555,38 @@ start_link(Code) -> fun () -> true = register(?NAME, self()), do_lock(), - locked(Code, Code) + locked(Code, length(Code), []) end). -button(Digit) -> - ?NAME ! {button,Digit}. - -locked(Code, [Digit|Remaining]) -> +button(Button) -> + ?NAME ! {button,Button}. + ]]></code> + <code type="erl"><![CDATA[ +locked(Code, Length, Buttons) -> receive - {button,Digit} when Remaining =:= [] -> - do_unlock(), - open(Code); - {button,Digit} -> - locked(Code, Remaining); - {button,_} -> - locked(Code, Code) + {button,Button} -> + NewButtons = + if + length(Buttons) < Length -> + Buttons; + true -> + tl(Buttons) + end ++ [Button], + if + NewButtons =:= Code -> % Correct + do_unlock(), + open(Code, Length); + true -> % Incomplete | Incorrect + locked(Code, Length, NewButtons) + end end. - -open(Code) -> + ]]></code> + <code type="erl"><![CDATA[ +open(Code, Length) -> receive - after 10000 -> + after 10000 -> % Time in milliseconds do_lock(), - locked(Code, Code) + locked(Code, Length, []) end. do_lock() -> @@ -1178,8 +1609,10 @@ do_unlock() -> passing non-system messages to the callback module. </p> <p> - The state transition - <seealso marker="stdlib:gen_statem#type-action">action</seealso> + The + <seealso marker="#State Transition Actions"> + State Transition Action + </seealso> <c>postpone</c> is designed to model selective receives. A selective receive implicitly postpones any not received events, but the <c>postpone</c> @@ -1196,16 +1629,16 @@ do_unlock() -> <!-- =================================================================== --> <section> - <marker id="State Entry Actions" /> - <title>State Entry Actions</title> + <marker id="State Enter Actions" /> + <title>State Enter Actions</title> <p> Say you have a state machine specification - that uses state entry actions. - Allthough you can code this using self-generated events + that uses state enter actions. + Allthough you can code this using inserted events (described in the next section), especially if just - one or a few states has got state entry actions, + one or a few states has got state enter actions, this is a perfect use case for the built in - <seealso marker="#State Enter Calls">state enter calls</seealso>. + <seealso marker="#State Enter Calls">State Enter Calls</seealso>. </p> <p> You return a list containing <c>state_enter</c> from your @@ -1219,7 +1652,7 @@ do_unlock() -> ... init(Code) -> process_flag(trap_exit, true), - Data = #{code => Code}, + Data = #{code => Code, length = length(Code)}, {ok, locked, Data}. callback_mode() -> @@ -1227,24 +1660,26 @@ callback_mode() -> locked(enter, _OldState, Data) -> do_lock(), - {keep_state,Data#{remaining => Code}}; + {keep_state,Data#{buttons => []}}; locked( - cast, {button,Digit}, - #{code := Code, remaining := Remaining} = Data) -> - case Remaining of - [Digit] -> - {next_state, open, Data}; + cast, {button,Button}, + #{code := Code, length := Length, buttons := Buttons} = Data) -> +... + if + NewButtons =:= Code -> % Correct + {next_state, open, Data}; ... open(enter, _OldState, _Data) -> do_unlock(), - {keep_state_and_data, [{state_timeout,10000,lock}]}; + {keep_state_and_data, + [{state_timeout,10000,lock}]}; % Time in milliseconds open(state_timeout, lock, Data) -> {next_state, locked, Data}; ... - ]]></code> +]]></code> <p> - You can repeat the state entry code by returning one of + You can repeat the state enter code by returning one of <c>{repeat_state, ...}</c>, <c>{repeat_state_and_data,_}</c> or <c>repeat_state_and_data</c> that otherwise behaves exactly like their <c>keep_state</c> siblings. @@ -1259,13 +1694,15 @@ open(state_timeout, lock, Data) -> <!-- =================================================================== --> <section> - <marker id="Self-Generated Events" /> - <title>Self-Generated Events</title> + <marker id="Inserted Events" /> + <title>Inserted Events</title> <p> It can sometimes be beneficial to be able to generate events to your own state machine. - This can be done with the state transition - <seealso marker="stdlib:gen_statem#type-action">action</seealso> + This can be done with the + <seealso marker="#State Transition Actions"> + State Transition Action + </seealso> <c>{next_event,EventType,EventContent}</c>. </p> <p> @@ -1279,58 +1716,75 @@ open(state_timeout, lock, Data) -> <p> One example for this is to pre-process incoming data, for example decrypting chunks or collecting characters up to a line break. + </p> + <p> Purists may argue that this should be modelled with a separate state machine that sends pre-processed events - to the main state machine. - But to decrease overhead the small pre-processing state machine + to the main state machine, + but to decrease overhead the small pre-processing state machine can be implemented in the common state event handling of the main state machine using a few state data variables that then sends the pre-processed events as internal events to the main state machine. + Using internal events also can make it easier + to synchronize the state machines. + </p> + <p> + A variant of this is to use a + <seealso marker="#Complex State"> + Complex State + </seealso> + with + <seealso marker="#One Event Handler">One Event Handler</seealso>. + The state is then modeled with for example a tuple + <c>{MainFSMState,SubFSMState}</c>. </p> <p> - The following example uses an input model where you give the lock - characters with <c>put_chars(Chars)</c> and then call - <c>enter()</c> to finish the input. + To illustrate this we make up an example where the buttons + instead generate down and up (press and release) events, + and the lock responds to an up event only after + the corresponding down event. </p> <code type="erl"><![CDATA[ ... --export(put_chars/1, enter/0). +-export([down/1, up/1]). ... -put_chars(Chars) when is_binary(Chars) -> - gen_statem:call(?NAME, {chars,Chars}). +down(Button) -> + gen_statem:cast(?NAME, {down,Button}). -enter() -> - gen_statem:call(?NAME, enter). +up(Button) -> + gen_statem:cast(?NAME, {up,Button}). ... locked(enter, _OldState, Data) -> do_lock(), - {keep_state,Data#{remaining => Code, buf => []}}; + {keep_state,Data#{buttons => []}}; +locked( + internal, {button,Button}, + #{code := Code, length := Length, buttons := Buttons} = Data) -> ... - -handle_event({call,From}, {chars,Chars}, #{buf := Buf} = Data) -> - {keep_state, Data#{buf := [Chars|Buf], - [{reply,From,ok}]}; -handle_event({call,From}, enter, #{buf := Buf} = Data) -> - Chars = unicode:characters_to_binary(lists:reverse(Buf)), - try binary_to_integer(Chars) of - Digit -> - {keep_state, Data#{buf := []}, - [{reply,From,ok}, - {next_event,internal,{button,Chars}}]} - catch - error:badarg -> - {keep_state, Data#{buf := []}, - [{reply,From,{error,not_an_integer}}]} +]]></code> + <code type="erl"><![CDATA[ +handle_common(cast, {down,Button}, Data) -> + {keep_state, Data#{button => Button}}; +handle_common(cast, {up,Button}, Data) -> + case Data of + #{button := Button} -> + {keep_state,maps:remove(button, Data), + [{next_event,internal,{button,Button}}]}; + #{} -> + keep_state_and_data end; ... - ]]></code> + +open(internal, {button,_}, Data) -> + {keep_state,Data,[postpone]}; +... +]]></code> <p> If you start this program with <c>code_lock:start([17])</c> - you can unlock with <c>code_lock:put_chars(<<"001">>), - code_lock:put_chars(<<"7">>), code_lock:enter()</c>. + you can unlock with <c>code_lock:down(17), code_lock:up(17).</c> </p> </section> @@ -1344,14 +1798,16 @@ handle_event({call,From}, enter, #{buf := Buf} = Data) -> modifications and some more using state enter calls, which deserves a new state diagram: </p> - <image file="../design_principles/code_lock_2.png"> + <!-- The image is edited with dia in a .dia file, + then exported to Scalable Vector Graphics. --> + <image file="../design_principles/code_lock_2.svg" width="80%"> <icaption>Code Lock State Diagram Revisited</icaption> </image> <p> Notice that this state diagram does not specify how to handle a button event in the state <c>open</c>. So, you need to - read somewhere else that unspecified events - must be ignored as in not consumed but handled in some other state. + read in some side notes, that is, here: that unspecified events + shall be postponed (handled in some later state). Also, the state diagram does not show that the <c>code_length/0</c> call must be handled in every state. </p> @@ -1368,8 +1824,8 @@ handle_event({call,From}, enter, #{buf := Buf} = Data) -> -define(NAME, code_lock_2). -export([start_link/1,stop/0]). --export([button/1,code_length/0]). --export([init/1,callback_mode/0,terminate/3,code_change/4]). +-export([down/1,up/1,code_length/0]). +-export([init/1,callback_mode/0,terminate/3]). -export([locked/3,open/3]). start_link(Code) -> @@ -1377,52 +1833,74 @@ start_link(Code) -> stop() -> gen_statem:stop(?NAME). -button(Digit) -> - gen_statem:cast(?NAME, {button,Digit}). +down(Button) -> + gen_statem:cast(?NAME, {down,Button}). +up(Button) -> + gen_statem:cast(?NAME, {up,Button}). code_length() -> gen_statem:call(?NAME, code_length). - + ]]></code> + <code type="erl"><![CDATA[ init(Code) -> process_flag(trap_exit, true), - Data = #{code => Code}, + Data = #{code => Code, length => length(Code), buttons => []}, {ok, locked, Data}. callback_mode() -> [state_functions,state_enter]. -locked(enter, _OldState, #{code := Code} = Data) -> +-define(HANDLE_COMMON, + ?FUNCTION_NAME(T, C, D) -> handle_common(T, C, D)). +%% +handle_common(cast, {down,Button}, Data) -> + {keep_state, Data#{button => Button}}; +handle_common(cast, {up,Button}, Data) -> + case Data of + #{button := Button} -> + {keep_state, maps:remove(button, Data), + [{next_event,internal,{button,Button}}]}; + #{} -> + keep_state_and_data + end; +handle_common({call,From}, code_length, #{code := Code}) -> + {keep_state_and_data, + [{reply,From,length(Code)}]}. + ]]></code> + <code type="erl"><![CDATA[ +locked(enter, _OldState, Data) -> do_lock(), - {keep_state, Data#{remaining => Code}}; + {keep_state, Data#{buttons := []}}; +locked(state_timeout, button, Data) -> + {keep_state, Data#{buttons := []}}; locked( - timeout, _, - #{code := Code, remaining := Remaining} = Data) -> - {keep_state, Data#{remaining := Code}}; -locked( - cast, {button,Digit}, - #{code := Code, remaining := Remaining} = Data) -> - case Remaining of - [Digit] -> % Complete + internal, {button,Button}, + #{code := Code, length := Length, buttons := Buttons} = Data) -> + NewButtons = + if + length(Buttons) < Length -> + Buttons; + true -> + tl(Buttons) + end ++ [Button], + if + NewButtons =:= Code -> % Correct {next_state, open, Data}; - [Digit|Rest] -> % Incomplete - {keep_state, Data#{remaining := Rest}, 30000}; - [_|_] -> % Wrong - {keep_state, Data#{remaining := Code}} + true -> % Incomplete | Incorrect + {keep_state, Data#{buttons := NewButtons}, + [{state_timeout,30000,button}]} % Time in milliseconds end; -locked(EventType, EventContent, Data) -> - handle_event(EventType, EventContent, Data). - +?HANDLE_COMMON. +]]></code> + <code type="erl"><![CDATA[ open(enter, _OldState, _Data) -> do_unlock(), - {keep_state_and_data, [{state_timeout,10000,lock}]}; + {keep_state_and_data, + [{state_timeout,10000,lock}]}; % Time in milliseconds open(state_timeout, lock, Data) -> {next_state, locked, Data}; -open(cast, {button,_}, _) -> +open(internal, {button,_}, _) -> {keep_state_and_data, [postpone]}; -open(EventType, EventContent, Data) -> - handle_event(EventType, EventContent, Data). - -handle_event({call,From}, code_length, #{code := Code}) -> - {keep_state_and_data, [{reply,From,length(Code)}]}. +?HANDLE_COMMON. do_lock() -> io:format("Locked~n", []). @@ -1432,9 +1910,7 @@ do_unlock() -> terminate(_Reason, State, _Data) -> State =/= locked andalso do_lock(), ok. -code_change(_Vsn, State, Data, _Extra) -> - {ok,State,Data}. - ]]></code> + ]]></code> </section> <section> @@ -1448,54 +1924,71 @@ code_change(_Vsn, State, Data, _Extra) -> so this example first branches depending on state: </p> <code type="erl"><![CDATA[ -... -export([handle_event/4]). - -... +]]></code> + <code type="erl"><![CDATA[ callback_mode() -> [handle_event_function,state_enter]. - + ]]></code> + <code type="erl"><![CDATA[ +%% %% State: locked -handle_event( - enter, _OldState, locked, - #{code := Code} = Data) -> +handle_event(enter, _OldState, locked, Data) -> do_lock(), - {keep_state, Data#{remaining => Code}}; -handle_event( - timeout, _, locked, - #{code := Code, remaining := Remaining} = Data) -> - {keep_state, Data#{remaining := Code}}; + {keep_state, Data#{buttons := []}}; +handle_event(state_timeout, button, locked, Data) -> + {keep_state, Data#{buttons := []}}; handle_event( - cast, {button,Digit}, locked, - #{code := Code, remaining := Remaining} = Data) -> - case Remaining of - [Digit] -> % Complete + internal, {button,Button}, locked, + #{code := Code, length := Length, buttons := Buttons} = Data) -> + NewButtons = + if + length(Buttons) < Length -> + Buttons; + true -> + tl(Buttons) + end ++ [Button], + if + NewButtons =:= Code -> % Correct {next_state, open, Data}; - [Digit|Rest] -> % Incomplete - {keep_state, Data#{remaining := Rest}, 30000}; - [_|_] -> % Wrong - {keep_state, Data#{remaining := Code}} + true -> % Incomplete | Incorrect + {keep_state, Data#{buttons := NewButtons}, + [{state_timeout,30000,button}]} % Time in milliseconds end; + ]]></code> + <code type="erl"><![CDATA[ %% %% State: open handle_event(enter, _OldState, open, _Data) -> do_unlock(), - {keep_state_and_data, [{state_timeout,10000,lock}]}; + {keep_state_and_data, + [{state_timeout,10000,lock}]}; % Time in milliseconds handle_event(state_timeout, lock, open, Data) -> {next_state, locked, Data}; -handle_event(cast, {button,_}, open, _) -> +handle_event(internal, {button,_}, open, _) -> {keep_state_and_data,[postpone]}; -%% -%% Any state -handle_event({call,From}, code_length, _State, #{code := Code}) -> - {keep_state_and_data, [{reply,From,length(Code)}]}. - -... - ]]></code> + ]]></code> + <code type="erl"><![CDATA[ +%% Common events +handle_event(cast, {down,Button}, _State, Data) -> + {keep_state, Data#{button => Button}}; +handle_event(cast, {up,Button}, _State, Data) -> + case Data of + #{button := Button} -> + {keep_state, maps:remove(button, Data), + [{next_event,internal,{button,Button}}, + {state_timeout,30000,button}]}; % Time in milliseconds + #{} -> + keep_state_and_data + end; +handle_event({call,From}, code_length, _State, #{length := Length}) -> + {keep_state_and_data, + [{reply,From,Length}]}. + ]]></code> </section> <p> - Notice that postponing buttons from the <c>locked</c> state - to the <c>open</c> state feels like a strange thing to do + Notice that postponing buttons from the <c>open</c> state + to the <c>locked</c> state feels like a strange thing to do for a code lock, but it at least illustrates event postponing. </p> </section> @@ -1532,7 +2025,7 @@ handle_event({call,From}, code_length, _State, #{code := Code}) -> </p> <code type="erl"><![CDATA[ ... --export([init/1,terminate/3,code_change/4,format_status/2]). +-export([init/1,terminate/3,format_status/2]). ... format_status(Opt, [_PDict,State,Data]) -> @@ -1540,7 +2033,6 @@ format_status(Opt, [_PDict,State,Data]) -> {State, maps:filter( fun (code, _) -> false; - (remaining, _) -> false; (_, _) -> true end, Data)}, @@ -1576,10 +2068,10 @@ format_status(Opt, [_PDict,State,Data]) -> <p> One reason to use this is when you have a state item that when changed should cancel the - <seealso marker="#State Time-Outs">state time-out</seealso>, + <seealso marker="#State Time-Outs">State Time-Out</seealso>, or one that affects the event handling in combination with postponing events. - We will complicate the previous example + We will go for the latter and complicate the previous example by introducing a configurable lock button (this is the state item in question), which in the <c>open</c> state immediately locks the door, @@ -1588,33 +2080,33 @@ format_status(Opt, [_PDict,State,Data]) -> <p> Suppose now that we call <c>set_lock_button</c> while the door is open, - and have already postponed a button event - that until now was not the lock button. - The sensible thing can be to say that - the button was pressed too early so it is - not to be recognized as the lock button. - However, then it can be surprising that a button event - that now is the lock button event arrives (as retried postponed) - immediately after the state transits to <c>locked</c>. - </p> - <p> - So we make the <c>button/1</c> function synchronous - by using - <seealso marker="stdlib:gen_statem#call/2"><c>gen_statem:call</c></seealso> - and still postpone its events in the <c>open</c> state. - Then a call to <c>button/1</c> during the <c>open</c> - state does not return until the state transits to <c>locked</c>, - as it is there the event is handled and the reply is sent. - </p> - <p> - If a process now calls <c>set_lock_button/1</c> - to change the lock button while another process - hangs in <c>button/1</c> with the new lock button, - it can be expected that the hanging lock button call - immediately takes effect and locks the lock. - Therefore, we make the current lock button a part of the state, - so that when we change the lock button, the state changes - and all postponed events are retried. + and we have already postponed a button event + that was the new lock button: + </p> + <code type="erl"><![CDATA[ +1> code_lock:start_link([a,b,c], x). +{ok,<0.666.0>} +2> code_lock:button(a). +ok +3> code_lock:button(b). +ok +4> code_lock:button(c). +ok +Open +5> code_lock:button(y). +ok +6> code_lock:set_lock_button(y). +x +% What should happen here? Immediate lock or nothing? +]]></code> + <p> + We could say that the button was pressed too early + so it is not to be recognized as the lock button. + Or we can make the lock button part of the state so + when we then change the lock button in the locked state, + the change becomes a state change + and all postponed events are retried, + therefore the lock is immediately locked! </p> <p> We define the state as <c>{StateName,LockButton}</c>, @@ -1627,8 +2119,8 @@ format_status(Opt, [_PDict,State,Data]) -> -define(NAME, code_lock_3). -export([start_link/2,stop/0]). --export([button/1,code_length/0,set_lock_button/1]). --export([init/1,callback_mode/0,terminate/3,code_change/4,format_status/2]). +-export([button/1,set_lock_button/1]). +-export([init/1,callback_mode/0,terminate/3]). -export([handle_event/4]). start_link(Code, LockButton) -> @@ -1637,77 +2129,68 @@ start_link(Code, LockButton) -> stop() -> gen_statem:stop(?NAME). -button(Digit) -> - gen_statem:call(?NAME, {button,Digit}). -code_length() -> - gen_statem:call(?NAME, code_length). +button(Button) -> + gen_statem:cast(?NAME, {button,Button}). set_lock_button(LockButton) -> gen_statem:call(?NAME, {set_lock_button,LockButton}). - + ]]></code> + <code type="erl"><![CDATA[ init({Code,LockButton}) -> process_flag(trap_exit, true), - Data = #{code => Code, remaining => undefined}, + Data = #{code => Code, length => length(Code), buttons => []}, {ok, {locked,LockButton}, Data}. callback_mode() -> [handle_event_function,state_enter]. -handle_event( - {call,From}, {set_lock_button,NewLockButton}, - {StateName,OldLockButton}, Data) -> - {next_state, {StateName,NewLockButton}, Data, - [{reply,From,OldLockButton}]}; -handle_event( - {call,From}, code_length, - {_StateName,_LockButton}, #{code := Code}) -> - {keep_state_and_data, - [{reply,From,length(Code)}]}; -%% %% State: locked +handle_event(enter, _OldState, {locked,_}, Data) -> + do_lock(), + {keep_state, Data#{buttons := []}}; +handle_event(state_timeout, button, {locked,_}, Data) -> + {keep_state, Data#{buttons := []}}; handle_event( - EventType, EventContent, - {locked,LockButton}, #{code := Code, remaining := Remaining} = Data) -> - case {EventType, EventContent} of - {enter, _OldState} -> - do_lock(), - {keep_state, Data#{remaining := Code}}; - {timeout, _} -> - {keep_state, Data#{remaining := Code}}; - {{call,From}, {button,Digit}} -> - case Remaining of - [Digit] -> % Complete - {next_state, {open,LockButton}, Data, - [{reply,From,ok}]}; - [Digit|Rest] -> % Incomplete - {keep_state, Data#{remaining := Rest}, - [{reply,From,ok}, 30000]}; - [_|_] -> % Wrong - {keep_state, Data#{remaining := Code}, - [{reply,From,ok}]} - end + cast, {button,Button}, {locked,LockButton}, + #{code := Code, length := Length, buttons := Buttons} = Data) -> + NewButtons = + if + length(Buttons) < Length -> + Buttons; + true -> + tl(Buttons) + end ++ [Button], + if + NewButtons =:= Code -> % Correct + {next_state, {open,LockButton}, Data}; + true -> % Incomplete | Incorrect + {keep_state, Data#{buttons := NewButtons}, + [{state_timeout,30000,button}]} % Time in milliseconds end; + ]]></code> + <code type="erl"><![CDATA[ %% %% State: open +handle_event(enter, _OldState, {open,_}, _Data) -> + do_unlock(), + {keep_state_and_data, + [{state_timeout,10000,lock}]}; % Time in milliseconds +handle_event(state_timeout, lock, {open,LockButton}, Data) -> + {next_state, {locked,LockButton}, Data}; +handle_event(cast, {button,LockButton}, {open,LockButton}, Data) -> + {next_state, {locked,LockButton}, Data}; +handle_event(cast, {button,_}, {open,_}, _Data) -> + {keep_state_and_data,[postpone]}; + ]]></code> + <code type="erl"><![CDATA[ +%% +%% Common events handle_event( - EventType, EventContent, - {open,LockButton}, Data) -> - case {EventType, EventContent} of - {enter, _OldState} -> - do_unlock(), - {keep_state_and_data, [{state_timeout,10000,lock}]}; - {state_timeout, lock} -> - {next_state, {locked,LockButton}, Data}; - {{call,From}, {button,Digit}} -> - if - Digit =:= LockButton -> - {next_state, {locked,LockButton}, Data, - [{reply,From,locked}]}; - true -> - {keep_state_and_data, - [postpone]} - end - end. - + {call,From}, {set_lock_button,NewLockButton}, + {StateName,OldLockButton}, Data) -> + {next_state, {StateName,NewLockButton}, Data, + [{reply,From,OldLockButton}]}. + ]]></code> + <code type="erl"><![CDATA[ do_lock() -> io:format("Locked~n", []). do_unlock() -> @@ -1716,29 +2199,7 @@ do_unlock() -> terminate(_Reason, State, _Data) -> State =/= locked andalso do_lock(), ok. -code_change(_Vsn, State, Data, _Extra) -> - {ok,State,Data}. -format_status(Opt, [_PDict,State,Data]) -> - StateData = - {State, - maps:filter( - fun (code, _) -> false; - (remaining, _) -> false; - (_, _) -> true - end, - Data)}, - case Opt of - terminate -> - StateData; - normal -> - [{data,[{"State",StateData}]}] - end. ]]></code> - <p> - It can be an ill-fitting model for a physical code lock - that the <c>button/1</c> call can hang until the lock - is locked. But for an API in general it is not that strange. - </p> </section> <!-- =================================================================== --> @@ -1770,17 +2231,15 @@ format_status(Opt, [_PDict,State,Data]) -> </p> <code type="erl"><![CDATA[ ... +%% %% State: open -handle_event( - EventType, EventContent, - {open,LockButton}, Data) -> - case {EventType, EventContent} of - {enter, _OldState} -> - do_unlock(), - {keep_state_and_data, - [{state_timeout,10000,lock},hibernate]}; +handle_event(enter, _OldState, {open,_}, _Data) -> + do_unlock(), + {keep_state_and_data, + [{state_timeout,10000,lock}, % Time in milliseconds + hibernate]}; ... - ]]></code> +]]></code> <p> The atom <seealso marker="stdlib:gen_statem#type-hibernate"><c>hibernate</c></seealso> @@ -1793,20 +2252,34 @@ handle_event( <p> To change that we would need to insert action <c>hibernate</c> in more places. - For example, for the state-independent <c>set_lock_button</c> - and <c>code_length</c> operations that then would have to - be aware of using <c>hibernate</c> while in the + For example, the state-independent <c>set_lock_button</c> + operation would have to use <c>hibernate</c> but only in the <c>{open,_}</c> state, which would clutter the code. </p> <p> - Another not uncommon scenario is to use the event time-out - to triger hibernation after a certain time of inactivity. + Another not uncommon scenario is to use the + <seealso marker="#Event Time-Outs">Event Time-Out</seealso> + to trigger hibernation after a certain time of inactivity. + There is also a server start option + <seealso marker="stdlib:gen_statem#type-hibernate_after_opt"> + <c>{hibernate_after, Timeout}</c> + </seealso> + for + <seealso marker="stdlib:gen_statem#start/3"> + <c>start/3,4</c> + </seealso> + or + <seealso marker="stdlib:gen_statem#start_link/3"> + <c>start_link/3,4</c> + </seealso> + that may be used to automatically hibernate the server. </p> <p> - This server probably does not use + This particular server probably does not use heap memory worth hibernating for. To gain anything from hibernation, your server would - have to produce some garbage during callback execution, + have to produce non-insignificant garbage + during callback execution, for which this example server can serve as a bad example. </p> </section> diff --git a/system/doc/design_principles/sup_princ.xml b/system/doc/design_principles/sup_princ.xml index 06ca44a9f6..321fa41e8d 100644 --- a/system/doc/design_principles/sup_princ.xml +++ b/system/doc/design_principles/sup_princ.xml @@ -4,7 +4,7 @@ <chapter> <header> <copyright> - <year>1997</year><year>2017</year> + <year>1997</year><year>2018</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -312,12 +312,17 @@ child_spec() = #{id => child_id(), % mandatory signal back. If no exit signal is received within the specified time, the child process is unconditionally terminated using <c>exit(Child, kill)</c>.</item> - <item>If the child process is another supervisor, it is to be + <item>If the child process is another supervisor, it must be set to <c>infinity</c> to give the subtree enough time to shut down. It is also allowed to set it to <c>infinity</c>, - if the child process is a worker. See the warning below:</item> + if the child process is a worker. See the warning below:</item> </list> <warning> + <p>Setting the shutdown time to anything other + than <c>infinity</c> for a child of type <c>supervisor</c> + can cause a race condition where the child in question + unlinks its own children, but fails to terminate them + before it is killed.</p> <p>Be careful when setting the shutdown time to <c>infinity</c> when the child process is a worker. Because, in this situation, the termination of the supervision tree depends on the diff --git a/system/doc/efficiency_guide/Makefile b/system/doc/efficiency_guide/Makefile index ce93762ced..a2742a1354 100644 --- a/system/doc/efficiency_guide/Makefile +++ b/system/doc/efficiency_guide/Makefile @@ -1,7 +1,7 @@ # # %CopyrightBegin% # -# Copyright Ericsson AB 2001-2016. All Rights Reserved. +# Copyright Ericsson AB 2001-2018. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -28,6 +28,7 @@ include $(ERL_TOP)/erts/vsn.mk #VSN=$(SYSTEM_VSN) APPLICATION=otp-system-documentation +XMLDIR := $(XMLDIR)/efficiency_guide # ---------------------------------------------------- # Release directory specification # ---------------------------------------------------- @@ -96,6 +97,7 @@ html: $(GIF_FILES) $(HTML_UG_FILE) debug opt: clean clean_docs: + rm -f $(XMLDIR)/*.xml rm -f $(HTMLDIR)/*.gif $(HTMLDIR)/*.html rm -f $(TOP_PDF_FILE) $(TOP_PDF_FILE:%.pdf=%.fo) rm -f errs core *~ diff --git a/system/doc/efficiency_guide/advanced.xml b/system/doc/efficiency_guide/advanced.xml index 7f719849cc..fe77ce8ea4 100644 --- a/system/doc/efficiency_guide/advanced.xml +++ b/system/doc/efficiency_guide/advanced.xml @@ -4,7 +4,7 @@ <chapter> <header> <copyright> - <year>2001</year><year>2016</year> + <year>2001</year><year>2018</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -188,16 +188,9 @@ limit can be raised or lowered using the <c>+t</c> option.</cell> </row> <row> - <cell>Ets tables</cell> - <cell>Default is 1400. It can be changed with the environment - variable <c>ERL_MAX_ETS_TABLES</c>.</cell> - </row> - <row> <cell>Elements in a tuple</cell> - <cell>The maximum number of elements in a tuple is 67,108,863 - (26-bit unsigned integer). Clearly, other factors such as the - available memory can make it difficult to create a tuple of - that size.</cell> + <cell>The maximum number of elements in a tuple is 16,777,215 + (24-bit unsigned integer).</cell> </row> <row> <cell>Size of binary</cell> @@ -255,10 +248,11 @@ <cell><marker id="unique_references"/>Unique References on a Runtime System Instance</cell> <cell>Each scheduler thread has its own set of references, and all other threads have a shared set of references. Each set of references - consist of <c>2⁶⁴ - 1</c> unique references. That is the total + consist of <c>2⁶⁴ - 1</c> unique references. That is, the total amount of unique references that can be produced on a runtime - system instance is <c>(NoSchedulers + 1) * (2⁶⁴ - 1)</c>. If a - scheduler thread create a new reference each nano second, + system instance is <c>(NoSchedulers + 1) × (2⁶⁴ - 1)</c>. + <br/><br/> + If a scheduler thread create a new reference each nano second, references will at earliest be reused after more than 584 years. That is, for the foreseeable future they are unique enough.</cell> </row> diff --git a/system/doc/efficiency_guide/binaryhandling.xml b/system/doc/efficiency_guide/binaryhandling.xml index 19f40c9abe..b500329ef9 100644 --- a/system/doc/efficiency_guide/binaryhandling.xml +++ b/system/doc/efficiency_guide/binaryhandling.xml @@ -5,7 +5,7 @@ <header> <copyright> <year>2007</year> - <year>2017</year> + <year>2018</year> <holder>Ericsson AB, All Rights Reserved</holder> </copyright> <legalnotice> @@ -357,25 +357,8 @@ all_but_zeroes_to_list(<<Byte,T/binary>>, Acc, Remaining) -> <c>Buffer</c> from a match context to a sub binary (or do nothing if <c>Buffer</c> is a binary already).</p> - <p>Before you begin to think that the compiler can optimize any binary - patterns, the following function cannot be optimized by the compiler - (currently, at least):</p> - - <code type="erl"><![CDATA[ -non_opt_eq([H|T1], <<H,T2/binary>>) -> - non_opt_eq(T1, T2); -non_opt_eq([_|_], <<_,_/binary>>) -> - false; -non_opt_eq([], <<>>) -> - true.]]></code> - - <p>It was mentioned earlier that the compiler can only delay creation of - sub binaries if it knows that the binary will not be shared. In this case, - the compiler cannot know.</p> - - <p>Soon it is shown how to rewrite <c>non_opt_eq/2</c> so that the delayed - sub binary optimization can be applied, and more importantly, it is shown - how you can find out whether your code can be optimized.</p> + <p>But in more complicated code, how can one know whether the + optimization is applied or not?</p> <section> <marker id="bin_opt_info"></marker> @@ -422,67 +405,6 @@ after_zero(<<>>) -> binary cannot be delayed, because it will be returned. The warning for the second clause says that a sub binary will not be created (yet).</p> - - <p>Let us revisit the earlier example of the code that could not - be optimized and find out why:</p> - - <code type="erl"><![CDATA[ -non_opt_eq([H|T1], <<H,T2/binary>>) -> - %% INFO: matching anything else but a plain variable to - %% the left of binary pattern will prevent delayed - %% sub binary optimization; - %% SUGGEST changing argument order - %% NOT OPTIMIZED: called function non_opt_eq/2 does not - %% begin with a suitable binary matching instruction - non_opt_eq(T1, T2); -non_opt_eq([_|_], <<_,_/binary>>) -> - false; -non_opt_eq([], <<>>) -> - true.]]></code> - - <p>The compiler emitted two warnings. The <c>INFO</c> warning refers - to the function <c>non_opt_eq/2</c> as a callee, indicating that any - function that call <c>non_opt_eq/2</c> cannot make delayed sub binary - optimization. There is also a suggestion to change argument order. - The second warning (that happens to refer to the same line) refers to - the construction of the sub binary itself.</p> - - <p>Soon another example will show the difference between the - <c>INFO</c> and <c>NOT OPTIMIZED</c> warnings somewhat clearer, but - let us first follow the suggestion to change argument order:</p> - - <code type="erl"><![CDATA[ -opt_eq(<<H,T1/binary>>, [H|T2]) -> - %% OPTIMIZED: creation of sub binary delayed - opt_eq(T1, T2); -opt_eq(<<_,_/binary>>, [_|_]) -> - false; -opt_eq(<<>>, []) -> - true.]]></code> - - <p>The compiler gives a warning for the following code fragment:</p> - - <code type="erl"><![CDATA[ -match_body([0|_], <<H,_/binary>>) -> - %% INFO: matching anything else but a plain variable to - %% the left of binary pattern will prevent delayed - %% sub binary optimization; - %% SUGGEST changing argument order - done; -...]]></code> - - <p>The warning means that <em>if</em> there is a call to <c>match_body/2</c> - (from another clause in <c>match_body/2</c> or another function), the - delayed sub binary optimization will not be possible. More warnings will - occur for any place where a sub binary is matched out at the end of and - passed as the second argument to <c>match_body/2</c>, for example:</p> - - <code type="erl"><![CDATA[ -match_head(List, <<_:10,Data/binary>>) -> - %% NOT OPTIMIZED: called function match_body/2 does not - %% begin with a suitable binary matching instruction - match_body(List, Data).]]></code> - </section> <section> diff --git a/system/doc/efficiency_guide/commoncaveats.xml b/system/doc/efficiency_guide/commoncaveats.xml index b41ffc3902..367da09ba3 100644 --- a/system/doc/efficiency_guide/commoncaveats.xml +++ b/system/doc/efficiency_guide/commoncaveats.xml @@ -169,53 +169,5 @@ multiple_setelement(T0) -> {Bin1,Bin2} = split_binary(Bin, Num)</code> </section> - <section> - <title>Operator "--"</title> - <p>The "<c>--</c>" operator has a complexity - proportional to the product of the length of its operands. - This means that the operator is very slow if both of its operands - are long lists:</p> - - <p><em>DO NOT</em></p> - <code type="none"><![CDATA[ - HugeList1 -- HugeList2]]></code> - - <p>Instead use the <seealso marker="stdlib:ordsets">ordsets</seealso> - module in STDLIB:</p> - - <p><em>DO</em></p> - <code type="none"> - HugeSet1 = ordsets:from_list(HugeList1), - HugeSet2 = ordsets:from_list(HugeList2), - ordsets:subtract(HugeSet1, HugeSet2)</code> - - <p>Obviously, that code does not work if the original order - of the list is important. If the order of the list must be - preserved, do as follows:</p> - - <p><em>DO</em></p> - <code type="none"><![CDATA[ - Set = gb_sets:from_list(HugeList2), - [E || E <- HugeList1, not gb_sets:is_element(E, Set)]]]></code> - - <note><p>This code behaves differently from "<c>--</c>" - if the lists contain duplicate elements (one occurrence - of an element in HugeList2 removes <em>all</em> - occurrences in HugeList1.)</p> - <p>Also, this code compares lists elements using the - "<c>==</c>" operator, while "<c>--</c>" uses the "<c>=:=</c>" operator. - If that difference is important, <c>sets</c> can be used instead of - <c>gb_sets</c>, but <c>sets:from_list/1</c> is much - slower than <c>gb_sets:from_list/1</c> for long lists.</p></note> - - <p>Using the "<c>--</c>" operator to delete an element - from a list is not a performance problem:</p> - - <p><em>OK</em></p> - <code type="none"> - HugeList1 -- [Element]</code> - - </section> - </chapter> diff --git a/system/doc/efficiency_guide/efficiency_guide.erl b/system/doc/efficiency_guide/efficiency_guide.erl index e982bdae65..c57785aaa3 100644 --- a/system/doc/efficiency_guide/efficiency_guide.erl +++ b/system/doc/efficiency_guide/efficiency_guide.erl @@ -1,5 +1,5 @@ -module(efficiency_guide). --compile(export_all). +-compile([export_all,nowarn_export_all). %% DO NOT naive_reverse([H|T]) -> @@ -71,28 +71,6 @@ all_but_zeroes_to_list(<<0,T/binary>>, Acc, Remaining) -> all_but_zeroes_to_list(<<Byte,T/binary>>, Acc, Remaining) -> all_but_zeroes_to_list(T, [Byte|Acc], Remaining-1). -non_opt_eq([H|T1], <<H,T2/binary>>) -> - non_opt_eq(T1, T2); -non_opt_eq([_|_], <<_,_/binary>>) -> - false; -non_opt_eq([], <<>>) -> - true. - -opt_eq(<<H,T1/binary>>, [H|T2]) -> - opt_eq(T1, T2); -opt_eq(<<_,_/binary>>, [_|_]) -> - false; -opt_eq(<<>>, []) -> - true. - -match_head(List, <<_:10,Data/binary>>) -> - match_body(List, Data). - -match_body([0|_], <<H,_/binary>>) -> - done; -match_body([H|T1], <<H,T2/binary>>) -> - {T1,T2}. - count1(<<_,T/binary>>, Count) -> count1(T, Count+1); count1(<<>>, Count) -> Count. diff --git a/system/doc/efficiency_guide/profiling.xml b/system/doc/efficiency_guide/profiling.xml index f185456158..5ec1f1be6e 100644 --- a/system/doc/efficiency_guide/profiling.xml +++ b/system/doc/efficiency_guide/profiling.xml @@ -4,7 +4,7 @@ <chapter> <header> <copyright> - <year>2001</year><year>2016</year> + <year>2001</year><year>2018</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -94,7 +94,7 @@ <p>The above slogan is one of the more common reasons for Erlang to terminate. For unknown reasons the Erlang Run-Time System failed to allocate memory to use. When this happens a crash dump is generated that contains information - about the state of the system as it ran out of mmeory. Use the + about the state of the system as it ran out of memory. Use the <seealso marker="observer:cdv"><c>crashdump_viewer</c></seealso> to get a view of the memory is being used. Look for processes with large heaps or many messages, large ets tables, etc.</p> diff --git a/system/doc/efficiency_guide/retired_myths.xml b/system/doc/efficiency_guide/retired_myths.xml index 9b914a3b6e..144c942c2b 100644 --- a/system/doc/efficiency_guide/retired_myths.xml +++ b/system/doc/efficiency_guide/retired_myths.xml @@ -60,4 +60,18 @@ That leads us to the myth that tail-recursive functions are faster than body-recursive functions.</p> </section> + + <section> + <title>Myth: List subtraction ("--" operator) is slow</title> + + <p>List subtraction used to have a run-time complexity proportional to the + product of the length of its operands, so it was extremely slow when both + lists were long.</p> + + <p>As of OTP 22 the run-time complexity is "n log n" and the operation will + complete quickly even when both lists are very long. In fact, it is + faster and uses less memory than the commonly used workaround to convert + both lists to ordered sets before subtracting them with + <c>ordsets:subtract/2</c>.</p> + </section> </chapter> diff --git a/system/doc/efficiency_guide/xmlfiles.mk b/system/doc/efficiency_guide/xmlfiles.mk index 23c0d991b4..e275823dd1 100644 --- a/system/doc/efficiency_guide/xmlfiles.mk +++ b/system/doc/efficiency_guide/xmlfiles.mk @@ -1,7 +1,7 @@ # # %CopyrightBegin% # -# Copyright Ericsson AB 2009-2016. All Rights Reserved. +# Copyright Ericsson AB 2009-2018. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. diff --git a/system/doc/embedded/Makefile b/system/doc/embedded/Makefile index 598ed280e5..1604075312 100644 --- a/system/doc/embedded/Makefile +++ b/system/doc/embedded/Makefile @@ -1,7 +1,7 @@ # # %CopyrightBegin% # -# Copyright Ericsson AB 1997-2016. All Rights Reserved. +# Copyright Ericsson AB 1997-2018. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -28,6 +28,7 @@ include $(ERL_TOP)/erts/vsn.mk #VSN=$(SYSTEM_VSN) APPLICATION=otp-system-documentation +XMLDIR := $(XMLDIR)/embedded # ---------------------------------------------------- # Release directory specification # ---------------------------------------------------- @@ -84,6 +85,7 @@ html: $(GIF_FILES) $(HTML_UG_FILE) debug opt: clean clean_docs: + rm -f $(XMLDIR)/*.xml rm -f $(HTMLDIR)/*.gif $(HTMLDIR)/*.html rm -f $(TOP_PDF_FILE) $(TOP_PDF_FILE:%.pdf=%.fo) rm -f errs core *~ diff --git a/system/doc/getting_started/Makefile b/system/doc/getting_started/Makefile index 5283d53e1c..1c917895d5 100644 --- a/system/doc/getting_started/Makefile +++ b/system/doc/getting_started/Makefile @@ -1,7 +1,7 @@ # # %CopyrightBegin% # -# Copyright Ericsson AB 1996-2016. All Rights Reserved. +# Copyright Ericsson AB 1996-2018. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -28,6 +28,7 @@ include $(ERL_TOP)/erts/vsn.mk #VSN=$(SYSTEM_VSN) APPLICATION=otp-system-documentation +XMLDIR := $(XMLDIR)/getting_started # ---------------------------------------------------- # Release directory specification # ---------------------------------------------------- @@ -83,6 +84,7 @@ html: $(GIF_FILES) $(HTML_UG_FILE) debug opt: clean clean_docs: + rm -f $(XMLDIR)/*.xml rm -f $(HTMLDIR)/*.gif $(HTMLDIR)/*.html rm -f $(TOP_PDF_FILE) $(TOP_PDF_FILE:%.pdf=%.fo) rm -f errs core *~ diff --git a/system/doc/getting_started/conc_prog.xml b/system/doc/getting_started/conc_prog.xml index 7936e0d484..4374a59e04 100644 --- a/system/doc/getting_started/conc_prog.xml +++ b/system/doc/getting_started/conc_prog.xml @@ -4,7 +4,7 @@ <chapter> <header> <copyright> - <year>2003</year><year>2017</year> + <year>2003</year><year>2018</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -627,7 +627,7 @@ ping finished</pre> %%% Change the function below to return the name of the node where the %%% messenger server runs server_node() -> - messenger@bill. + messenger@super. %%% This is the server process for the "messenger" %%% the user list has the format [{ClientPid1, Name1},{ClientPid22, Name2},...] diff --git a/system/doc/getting_started/seq_prog.xml b/system/doc/getting_started/seq_prog.xml index 6b7e1cd24f..2b0750ff80 100644 --- a/system/doc/getting_started/seq_prog.xml +++ b/system/doc/getting_started/seq_prog.xml @@ -4,7 +4,7 @@ <chapter> <header> <copyright> - <year>2003</year><year>2016</year> + <year>2003</year><year>2017</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -271,11 +271,12 @@ convert(N, centimeter) -> {'EXIT',{function_clause,[{tut2,convert, [3,miles], [{file,"tut2.erl"},{line,4}]}, - {erl_eval,do_apply,5,[{file,"erl_eval.erl"},{line,482}]}, - {shell,exprs,7,[{file,"shell.erl"},{line,666}]}, - {shell,eval_exprs,7,[{file,"shell.erl"},{line,621}]}, - {shell,eval_loop,3,[{file,"shell.erl"},{line,606}]}]}}</pre> - + {erl_eval,do_apply,6, + [{file,"erl_eval.erl"},{line,677}]}, + {shell,exprs,7,[{file,"shell.erl"},{line,687}]}, + {shell,eval_exprs,7,[{file,"shell.erl"},{line,642}]}, + {shell,eval_loop,3, + [{file,"shell.erl"},{line,627}]}]}}</pre> </section> <section> diff --git a/system/doc/installation_guide/Makefile b/system/doc/installation_guide/Makefile index 29edd10501..38252757d6 100644 --- a/system/doc/installation_guide/Makefile +++ b/system/doc/installation_guide/Makefile @@ -1,7 +1,7 @@ # # %CopyrightBegin% # -# Copyright Ericsson AB 1996-2016. All Rights Reserved. +# Copyright Ericsson AB 1996-2018. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -28,6 +28,8 @@ include $(ERL_TOP)/erts/vsn.mk #VSN=$(SYSTEM_VSN) APPLICATION=otp-system-documentation +XMLDIR := $(XMLDIR)/installation_guide + # ---------------------------------------------------- # Release directory specification # ---------------------------------------------------- @@ -43,6 +45,8 @@ include xmlfiles.mk XML_CHAPTER_FILES=$(INST_GUIDE_CHAPTER_FILES) +# ---------------------------------------------------- + TOPDOCDIR=.. BOOK_FILES = book.xml @@ -55,12 +59,7 @@ XML_FILES = \ $(BOOK_FILES) $(XML_CHAPTER_FILES) \ $(XML_PART_FILES) -# ---------------------------------------------------- -GENERATED_XML_FILES = \ - INSTALL.xml \ - INSTALL-CROSS.xml \ - INSTALL-WIN32.xml \ - OTP-PATCH-APPLY.xml +XML_GEN_FILES = $(INST_GUIDE_CHAPTER_GEN_FILES:%=$(XMLDIR)/%) # ---------------------------------------------------- @@ -88,7 +87,7 @@ DVIPS_FLAGS += # Targets # ---------------------------------------------------- -%.xml: $(ERL_TOP)/HOWTO/%.md $(ERL_TOP)/make/emd2exml +$(XMLDIR)/%.xml: $(ERL_TOP)/HOWTO/%.md $(ERL_TOP)/make/emd2exml $(ERL_TOP)/make/emd2exml $< $@ $(REDIRECT_HTML_DIR)/%.html: Makefile @@ -101,17 +100,18 @@ $(REDIRECT_HTML_DIR)/%.html: Makefile echo "This <a href=\"../"$(notdir $@)"\">link</a> will" >> $@ echo "take you there immediately.</p></body></html>" >> $@ -docs: $(GENERATED_XML_FILES) html +docs: $(XML_GEN_FILES) html local_docs: PDFDIR=../../pdf -local_docs: $(GENERATED_XML_FILES) +local_docs: $(XML_GEN_FILES) -html: $(REDIRECT_HTML_FILES) $(GENERATED_XML_FILES) $(GIF_FILES) $(HTML_UG_FILE) +html: $(REDIRECT_HTML_FILES) $(XML_GEN_FILES) $(GIF_FILES) $(HTML_UG_FILE) debug opt: clean clean_docs: rm -f $(GENERATED_XML_FILES) + rm -f $(XMLDIR)/*.xml rm -f $(HTMLDIR)/*.gif $(HTMLDIR)/*.html rm -f $(TOP_PDF_FILE) $(TOP_PDF_FILE:%.pdf=%.fo) rm -f errs core *~ diff --git a/system/doc/installation_guide/xmlfiles.mk b/system/doc/installation_guide/xmlfiles.mk index 3f720e1ee5..f005c8404b 100644 --- a/system/doc/installation_guide/xmlfiles.mk +++ b/system/doc/installation_guide/xmlfiles.mk @@ -1,7 +1,7 @@ # # %CopyrightBegin% # -# Copyright Ericsson AB 2009-2016. All Rights Reserved. +# Copyright Ericsson AB 2009-2018. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -18,7 +18,9 @@ # %CopyrightEnd% # INST_GUIDE_CHAPTER_FILES = \ - install-binary.xml \ + install-binary.xml + +INST_GUIDE_CHAPTER_GEN_FILES = \ INSTALL.xml \ INSTALL-CROSS.xml \ INSTALL-WIN32.xml \ diff --git a/system/doc/oam/Makefile b/system/doc/oam/Makefile index 42b979be85..2eb429e04d 100644 --- a/system/doc/oam/Makefile +++ b/system/doc/oam/Makefile @@ -1,7 +1,7 @@ # # %CopyrightBegin% # -# Copyright Ericsson AB 1997-2016. All Rights Reserved. +# Copyright Ericsson AB 1997-2018. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -27,6 +27,7 @@ include $(ERL_TOP)/erts/vsn.mk #VSN=$(SYSTEM_VSN) APPLICATION=otp-system-documentation +XMLDIR := $(XMLDIR)/oam # ---------------------------------------------------- # Release directory specification # ---------------------------------------------------- @@ -85,6 +86,7 @@ gifs: $(GIF_FILES:%=$(HTMLDIR)/%) debug opt: clean clean_docs: + rm -f $(XMLDIR)/*.xml rm -f $(HTMLDIR)/*.gif $(HTMLDIR)/*.html rm -f $(TOP_PDF_FILE) $(TOP_PDF_FILE:%.pdf=%.fo) rm -f errs core *~ diff --git a/system/doc/programming_examples/Makefile b/system/doc/programming_examples/Makefile index 4d4aebcbc1..9c67c24b64 100644 --- a/system/doc/programming_examples/Makefile +++ b/system/doc/programming_examples/Makefile @@ -1,7 +1,7 @@ # # %CopyrightBegin% # -# Copyright Ericsson AB 2003-2016. All Rights Reserved. +# Copyright Ericsson AB 2003-2018. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -28,6 +28,7 @@ include $(ERL_TOP)/erts/vsn.mk #VSN=$(SYSTEM_VSN) APPLICATION=otp-system-documentation +XMLDIR := $(XMLDIR)/programming_examples # ---------------------------------------------------- # Release directory specification # ---------------------------------------------------- @@ -52,7 +53,9 @@ PS_FILES = XML_FILES = \ $(BOOK_FILES) $(XML_CHAPTER_FILES) \ - $(XML_PART_FILES) + $(XML_PART_FILES) + +XML_GEN_FILES = $(PROG_EX_CHAPTER_GEN_FILES:%=$(XMLDIR)/%) # ---------------------------------------------------- HTML_FILES = \ @@ -80,6 +83,7 @@ html: $(GIF_FILES) $(HTML_UG_FILE) debug opt: clean clean_docs: + rm -f $(XMLDIR)/*.xml rm -f $(HTMLDIR)/*.gif $(HTMLDIR)/*.html rm -f $(TOP_PDF_FILE) $(TOP_PDF_FILE:%.pdf=%.fo) rm -f errs core *~ diff --git a/system/doc/programming_examples/xmlfiles.mk b/system/doc/programming_examples/xmlfiles.mk index 5129e488f4..e457ca0cce 100644 --- a/system/doc/programming_examples/xmlfiles.mk +++ b/system/doc/programming_examples/xmlfiles.mk @@ -1,7 +1,7 @@ # # %CopyrightBegin% # -# Copyright Ericsson AB 2009-2016. All Rights Reserved. +# Copyright Ericsson AB 2009-2018. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -19,6 +19,8 @@ # PROG_EX_CHAPTER_FILES = \ bit_syntax.xml \ - funs.xml \ list_comprehensions.xml \ records.xml + +PROG_EX_CHAPTER_GEN_FILES = \ + funs.xml diff --git a/system/doc/reference_manual/Makefile b/system/doc/reference_manual/Makefile index b09bf5496c..809eb2c979 100644 --- a/system/doc/reference_manual/Makefile +++ b/system/doc/reference_manual/Makefile @@ -1,7 +1,7 @@ # # %CopyrightBegin% # -# Copyright Ericsson AB 2003-2016. All Rights Reserved. +# Copyright Ericsson AB 2003-2018. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -28,6 +28,7 @@ include $(ERL_TOP)/erts/vsn.mk #VSN=$(SYSTEM_VSN) APPLICATION=otp-system-documentation +XMLDIR := $(XMLDIR)/reference_manual # ---------------------------------------------------- # Release directory specification # ---------------------------------------------------- @@ -93,6 +94,7 @@ html: $(GIF_FILES) $(HTML_UG_FILE) debug opt: clean clean_docs: + rm -f $(XMLDIR)/*.xml rm -f $(HTMLDIR)/*.gif $(HTMLDIR)/*.html rm -f $(TOP_PDF_FILE) $(TOP_PDF_FILE:%.pdf=%.fo) rm -f errs core *~ diff --git a/system/doc/reference_manual/errors.xml b/system/doc/reference_manual/errors.xml index b16c5da6eb..16d3e7590e 100644 --- a/system/doc/reference_manual/errors.xml +++ b/system/doc/reference_manual/errors.xml @@ -108,14 +108,55 @@ (see <seealso marker="#exit_reasons">Exit Reason</seealso>), and a stack trace (which aids in finding the code location of the exception).</p> - <p>The stack trace can be retrieved using - <c>erlang:get_stacktrace/0</c> - from within a <c>try</c> expression, and is returned for + <p>The stack trace can be be bound to a variable from within + a <c>try</c> expression, and is returned for exceptions of class <c>error</c> from a <c>catch</c> expression.</p> <p>An exception of class <c>error</c> is also known as a run-time error.</p> + + <section> + <title>The call-stack back trace (stacktrace)</title> + <p>The stack back-trace (<em>stacktrace</em>) is a list of + <c>{Module,Function,Arity,Location}</c> + tuples. The field <c>Arity</c> in the first tuple can be the + argument list of that function call instead of an arity integer, + depending on the exception.</p> + + <p><c>Location</c> is a (possibly empty) list of two-tuples + that can indicate the location in the source code of the + function. The first element is an atom describing the type of + information in the second element. The following items can + occur:</p> + <taglist> + <tag><c>file</c></tag> + <item>The second element of the tuple is a string (list of + characters) representing the filename of the source file + of the function. + </item> + <tag><c>line</c></tag> + <item>The second element of the tuple is the line number + (an integer > 0) in the source file + where the exception occurred or the function was called. + </item> + </taglist> + <warning><p>Developers should rely on stacktrace entries only for + debugging purposes.</p> + <p>The VM performs tail call optimization, which + does not add new entries to the stacktrace, and also limits stacktraces + to a certain depth. Furthermore, compiler options, optimizations and + future changes may add or remove stacktrace entries, causing any code + that expects the stacktrace to be in a certain order or contain specific + items to fail.</p> + <p>The only exception to this rule is the class <c>error</c> with the + reason <c>undef</c> which is guaranteed to include the <c>Module</c>, + <c>Function</c> and <c>Arity</c> of the attempted + function as the first stacktrace entry.</p> + </warning> + </section> + </section> + <section> <title>Handling of Run-time Errors in Erlang</title> diff --git a/system/doc/reference_manual/expressions.xml b/system/doc/reference_manual/expressions.xml index cf2d5034aa..76b3e92937 100644 --- a/system/doc/reference_manual/expressions.xml +++ b/system/doc/reference_manual/expressions.xml @@ -4,7 +4,7 @@ <chapter> <header> <copyright> - <year>2003</year><year>2017</year> + <year>2003</year><year>2018</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -567,6 +567,10 @@ Expr1 <input>op</input> Expr2</pre> order is defined:</p> <pre> number < atom < reference < fun < port < pid < tuple < map < nil < list < bit string</pre> + <p><c>nil</c> in the previous expression represents the empty list + (<c>[]</c>), which is regarded as a separate type from + <c>list/0</c>. That is why <c>nil < list</c>. + </p> <p>Lists are compared element by element. Tuples are ordered by size, two tuples with the same size are compared element by element.</p> @@ -1340,9 +1344,9 @@ hello</pre> <code type="none"> try Exprs catch - [Class1:]ExceptionPattern1 [when ExceptionGuardSeq1] -> + Class1:ExceptionPattern1[:Stacktrace] [when ExceptionGuardSeq1] -> ExceptionBody1; - [ClassN:]ExceptionPatternN [when ExceptionGuardSeqN] -> + ClassN:ExceptionPatternN[:Stacktrace] [when ExceptionGuardSeqN] -> ExceptionBodyN end</code> <p>This is an enhancement of @@ -1362,10 +1366,12 @@ end</code> the evaluation. In that case the exception is caught and the patterns <c>ExceptionPattern</c> with the right exception class <c>Class</c> are sequentially matched against the caught - exception. An omitted <c>Class</c> is shorthand for <c>throw</c>. - If a match succeeds and the optional guard sequence + exception. If a match succeeds and the optional guard sequence <c>ExceptionGuardSeq</c> is true, the corresponding <c>ExceptionBody</c> is evaluated to become the return value.</p> + <p><c>Stacktrace</c>, if specified, must be the name of a variable + (not a pattern). The stack trace is bound to the variable when + the corresponding <c>ExceptionPattern</c> matches.</p> <p>If an exception occurs during evaluation of <c>Exprs</c> but there is no matching <c>ExceptionPattern</c> of the right <c>Class</c> with a true guard sequence, the exception is passed @@ -1373,6 +1379,18 @@ end</code> expression.</p> <p>If an exception occurs during evaluation of <c>ExceptionBody</c>, it is not caught.</p> + <p>It is allowed to omit <c>Class</c> and <c>Stacktrace</c>. + An omitted <c>Class</c> is shorthand for <c>throw</c>:</p> + + <code type="none"> +try Exprs +catch + ExceptionPattern1 [when ExceptionGuardSeq1] -> + ExceptionBody1; + ExceptionPatternN [when ExceptionGuardSeqN] -> + ExceptionBodyN +end</code> + <p>The <c>try</c> expression can have an <c>of</c> section: </p> @@ -1384,10 +1402,10 @@ try Exprs of PatternN [when GuardSeqN] -> BodyN catch - [Class1:]ExceptionPattern1 [when ExceptionGuardSeq1] -> + Class1:ExceptionPattern1[:Stacktrace] [when ExceptionGuardSeq1] -> ExceptionBody1; ...; - [ClassN:]ExceptionPatternN [when ExceptionGuardSeqN] -> + ClassN:ExceptionPatternN[:Stacktrace] [when ExceptionGuardSeqN] -> ExceptionBodyN end</code> <p>If the evaluation of <c>Exprs</c> succeeds without an exception, @@ -1408,10 +1426,10 @@ try Exprs of PatternN [when GuardSeqN] -> BodyN catch - [Class1:]ExceptionPattern1 [when ExceptionGuardSeq1] -> + Class1:ExceptionPattern1[:Stacktrace] [when ExceptionGuardSeq1] -> ExceptionBody1; ...; - [ClassN:]ExceptionPatternN [when ExceptionGuardSeqN] -> + ClassN:ExceptionPatternN[:Stacktrace] [when ExceptionGuardSeqN] -> ExceptionBodyN after AfterBody @@ -1470,7 +1488,7 @@ try Expr catch throw:Term -> Term; exit:Reason -> {'EXIT',Reason} - error:Reason -> {'EXIT',{Reason,erlang:get_stacktrace()}} + error:Reason:Stk -> {'EXIT',{Reason,Stk}} end</code> </section> diff --git a/system/doc/reference_manual/introduction.xml b/system/doc/reference_manual/introduction.xml index afbdfa7434..69e52e0b37 100644 --- a/system/doc/reference_manual/introduction.xml +++ b/system/doc/reference_manual/introduction.xml @@ -4,7 +4,7 @@ <chapter> <header> <copyright> - <year>2003</year><year>2017</year> + <year>2003</year><year>2018</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -48,7 +48,7 @@ System Principles</seealso></p> <p>Starting and stopping, boot scripts, code loading, <seealso marker="doc/system_principles:error_logging"> - error logging</seealso>, + logging</seealso>, <seealso marker="doc/system_principles:create_target"> creating target systems</seealso></p> </item> diff --git a/system/doc/reference_manual/macros.xml b/system/doc/reference_manual/macros.xml index a341307ab7..8a8d5f3a4c 100644 --- a/system/doc/reference_manual/macros.xml +++ b/system/doc/reference_manual/macros.xml @@ -4,7 +4,7 @@ <chapter> <header> <copyright> - <year>2003</year><year>2017</year> + <year>2003</year><year>2018</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -150,6 +150,11 @@ bar(X) -> <item>The name of the current function.</item> <tag><c>?FUNCTION_ARITY</c></tag> <item>The arity (number of arguments) for the current function.</item> + <tag><c>?OTP_RELEASE</c></tag> + <item>The OTP release that the currently executing ERTS + application is part of, as an integer. For details, see + <seealso marker="erts:erlang#system_info/1"><c>erlang:system_info(otp_release)</c></seealso>. + This macro was introduced in OTP release 21.</item> </taglist> </section> @@ -202,8 +207,16 @@ f() -> directive. If that condition is false, the lines following <c>else</c> are evaluated instead.</item> <tag><c>-endif.</c></tag> - <item>Specifies the end of an <c>ifdef</c> or <c>ifndef</c> - directive.</item> + <item>Specifies the end of an <c>ifdef</c>, an <c>ifndef</c> + directive, or the end of an <c>if</c> or <c>elif</c> directive.</item> + <tag><c>-if(Condition).</c></tag> + <item>Evaluates the following lines only if <c>Condition</c> + evaluates to true.</item> + <tag><c>-elif(Condition).</c></tag> + <item>Only allowed after an <c>if</c> or another <c>elif</c> directive. + If the preceding <c>if</c> or <c>elif</c> directives do not + evaluate to true, and the <c>Condition</c> evaluates to true, + the lines following the <c>elif</c> are evaluated instead.</item> </taglist> <note> <p>The macro directives cannot be used inside functions.</p> @@ -231,6 +244,24 @@ or {ok,m}</pre> <p><c>?LOG(Arg)</c> is then expanded to a call to <c>io:format/2</c> and provide the user with some simple trace output.</p> + + <p><em>Example:</em></p> + <code type="none"> +-module(m) +... +-ifdef(OTP_RELEASE). + %% OTP 21 or higher + -if(?OTP_RELEASE >= 22). + %% Code that will work in OTP 22 or higher + -elif(?OTP_RELEASE >= 21). + %% Code that will work in OTP 21 or higher + -endif. +-else. + %% OTP 20 or lower. +-endif. +...</code> + <p>The code uses the <c>OTP_RELEASE</c> macro to conditionally + select code depending on release.</p> </section> <section> diff --git a/system/doc/reference_manual/modules.xml b/system/doc/reference_manual/modules.xml index 4a97bfeb7b..6f93198ec1 100644 --- a/system/doc/reference_manual/modules.xml +++ b/system/doc/reference_manual/modules.xml @@ -4,7 +4,7 @@ <chapter> <header> <copyright> - <year>2003</year><year>2017</year> + <year>2003</year><year>2018</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -307,6 +307,12 @@ behaviour_info(callbacks) -> Callbacks.</pre> all functions in the module.</p> </item> + <tag><c>nifs</c></tag> + <item> + <p>Returns a list of <c>{Name,Arity}</c> tuples with + all NIF functions in the module.</p> + </item> + <tag><c>native</c></tag> <item> <p>Return <c>true</c> if the module has native compiled code. diff --git a/system/doc/reference_manual/typespec.xml b/system/doc/reference_manual/typespec.xml index f6a19397c3..27cd0ba83d 100644 --- a/system/doc/reference_manual/typespec.xml +++ b/system/doc/reference_manual/typespec.xml @@ -4,7 +4,7 @@ <chapter> <header> <copyright> - <year>2003</year><year>2017</year> + <year>2003</year><year>2018</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -113,8 +113,8 @@ | Erlang_Atom %% 'foo', 'bar', ... Bitstring :: <<>> - | <<_:M>> %% M is a positive integer - | <<_:_*N>> %% N is a positive integer + | <<_:M>> %% M is an Integer_Value that evaluates to a positive integer + | <<_:_*N>> %% N is an Integer_Value that evaluates to a positive integer | <<_:M, _:_*N>> Fun :: fun() %% any function @@ -123,8 +123,17 @@ | fun((TList) -> Type) Integer :: integer() - | Erlang_Integer %% ..., -1, 0, 1, ... 42 ... - | Erlang_Integer..Erlang_Integer %% specifies an integer range + | Integer_Value + | Integer_Value..Integer_Value %% specifies an integer range + + Integer_Value :: Erlang_Integer %% ..., -1, 0, 1, ... 42 ... + | Erlang_Character %% $a, $b ... + | Integer_Value BinaryOp Integer_Value + | UnaryOp Integer_Value + + BinaryOp :: '*' | 'div' | 'rem' | 'band' | '+' | '-' | 'bor' | 'bxor' | 'bsl' | 'bsr' + + UnaryOp :: '+' | '-' | 'bnot' List :: list(Type) %% Proper list ([]-terminated) | maybe_improper_list(Type1, Type2) %% Type1=contents, Type2=termination @@ -151,8 +160,13 @@ Union :: Type1 | Type2 ]]></pre> <p> + Integer values are either integer or character literals or expressions + consisting of possibily nested unary or binary operations that evaluate to + an integer. Such expressions can also be used in bit strings and ranges. + </p> + <p> The general form of bit strings is <c><<_:M, _:_*N>></c>, - where <c>M</c> and <c>N</c> are positive integers. It denotes a + where <c>M</c> and <c>N</c> must evaluate to positive integers. It denotes a bit string that is <c>M + (k*N)</c> bits long (that is, a bit string that starts with <c>M</c> bits and continues with <c>k</c> segments of <c>N</c> bits each, where <c>k</c> is also a positive integer). diff --git a/system/doc/reference_manual/xmlfiles.mk b/system/doc/reference_manual/xmlfiles.mk index fffcbdd911..92d232b628 100644 --- a/system/doc/reference_manual/xmlfiles.mk +++ b/system/doc/reference_manual/xmlfiles.mk @@ -1,7 +1,7 @@ # # %CopyrightBegin% # -# Copyright Ericsson AB 2009-2016. All Rights Reserved. +# Copyright Ericsson AB 2009-2018. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. diff --git a/system/doc/system_architecture_intro/Makefile b/system/doc/system_architecture_intro/Makefile index 5000df6038..ea9ee85105 100644 --- a/system/doc/system_architecture_intro/Makefile +++ b/system/doc/system_architecture_intro/Makefile @@ -1,7 +1,7 @@ # # %CopyrightBegin% # -# Copyright Ericsson AB 1997-2016. All Rights Reserved. +# Copyright Ericsson AB 1997-2018. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -28,6 +28,7 @@ include $(ERL_TOP)/erts/vsn.mk #VSN=$(SYSTEM_VSN) APPLICATION=otp-system-documentation +XMLDIR := $(XMLDIR)/system_architecture_intro # ---------------------------------------------------- # Release directory specification # ---------------------------------------------------- @@ -78,6 +79,7 @@ html: $(GIF_FILES) $(HTML_UG_FILE) debug opt: clean clean_docs: + rm -f $(XMLDIR)/*.xml rm -f $(HTMLDIR)/*.gif $(HTMLDIR)/*.html rm -f $(TOP_PDF_FILE) $(TOP_PDF_FILE:%.pdf=%.fo) rm -f errs core *~ diff --git a/system/doc/system_architecture_intro/sys_arch_intro.xml b/system/doc/system_architecture_intro/sys_arch_intro.xml index cf75e1f100..e8ada6427b 100644 --- a/system/doc/system_architecture_intro/sys_arch_intro.xml +++ b/system/doc/system_architecture_intro/sys_arch_intro.xml @@ -4,7 +4,7 @@ <chapter> <header> <copyright> - <year>2000</year><year>2016</year> + <year>2000</year><year>2018</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -98,20 +98,6 @@ </list> </item> <item> - <p>CORBA services and IDL compiler.</p> - <list type="bulleted"> - <item><em>cosEvent</em> Orber OMG Event Service.</item> - <item><em>cosNotification</em> Orber OMG Notification - Service.</item> - <item><em>cosTime</em> Orber OMG Timer and TimerEvent - Services.</item> - <item><em>cosTransactions</em> Orber OMG Transaction - Service.</item> - <item><em>IC</em> IDL compiler</item> - <item><em>Orber</em> A CORBA object request broker.</item> - </list> - </item> - <item> <p>Tools.</p> <list type="bulleted"> <item><em>Appmon</em> A utility used to view OTP applications.</item> diff --git a/system/doc/system_principles/Makefile b/system/doc/system_principles/Makefile index 657e02024f..5110b73373 100644 --- a/system/doc/system_principles/Makefile +++ b/system/doc/system_principles/Makefile @@ -1,7 +1,7 @@ # # %CopyrightBegin% # -# Copyright Ericsson AB 1996-2016. All Rights Reserved. +# Copyright Ericsson AB 1996-2018. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -28,6 +28,7 @@ include $(ERL_TOP)/erts/vsn.mk #VSN=$(SYSTEM_VSN) APPLICATION=otp-system-documentation +XMLDIR := $(XMLDIR)/system_principles # ---------------------------------------------------- # Release directory specification # ---------------------------------------------------- @@ -52,6 +53,8 @@ XML_FILES = \ $(BOOK_FILES) $(XML_CHAPTER_FILES) \ $(XML_PART_FILES) +XML_GEN_FILES = $(SYSTEM_PRINCIPLES_CHAPTER_GEN_FILES:%=$(XMLDIR)/%) + # ---------------------------------------------------- HTMLDIR = ../html/system_principles @@ -77,6 +80,7 @@ html: $(GIF_FILES) $(HTML_UG_FILE) debug opt: clean clean_docs: + rm -f $(XMLDIR)/*.xml rm -f $(HTMLDIR)/*.gif $(HTMLDIR)/*.html rm -f $(TOP_PDF_FILE) $(TOP_PDF_FILE:%.pdf=%.fo) rm -f errs core *~ diff --git a/system/doc/system_principles/create_target.xmlsrc b/system/doc/system_principles/create_target.xmlsrc index f9b27ffc35..47b84e5760 100644 --- a/system/doc/system_principles/create_target.xmlsrc +++ b/system/doc/system_principles/create_target.xmlsrc @@ -4,7 +4,7 @@ <chapter> <header> <copyright> - <year>2002</year><year>2016</year> + <year>2002</year><year>2018</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -263,6 +263,14 @@ os> <input>/usr/local/erl-target/bin/erl -boot /usr/local/erl-target/releases/FI current directory create not only the file <c>mysystem.rel</c>, but also file <c>sys.config</c>, the latter file is tacitly put in the appropriate directory.</p> + <p>However, it can also be convenient to replace variables in + within a <c>sys.config</c> on the target after unpacking but + before running the release. If you have a <c>sys.config.src</c> + it will be included and is not required to be a valid Erlang term + file like <c>sys.config</c>. Before running the release you must + have a valid <c>sys.config</c> in the same directory, so using + <c>sys.config.src</c> requires having some tool to populate what is + needed and write <c>sys.config</c> to disk before booting the release.</p> </section> <section> diff --git a/system/doc/system_principles/error_logging.xml b/system/doc/system_principles/error_logging.xml index c99d59ddb7..9cbf7a2e94 100644 --- a/system/doc/system_principles/error_logging.xml +++ b/system/doc/system_principles/error_logging.xml @@ -4,7 +4,7 @@ <chapter> <header> <copyright> - <year>2003</year><year>2016</year> + <year>2003</year><year>2018</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -39,80 +39,71 @@ <code type="none"><![CDATA[ =ERROR REPORT==== 9-Dec-2003::13:25:02 === Error in process <0.27.0> with exit value: {{badmatch,[1,2,3]},[{m,f,1},{shell,eval_loop,2}]}]]></code> - <p>The error information is handled by the <em>error logger</em>, a - system process registered as <c>error_logger</c>. This process - receives all error messages from the Erlang runtime system as - well as from the standard behaviours and different Erlang/OTP - applications.</p> + <p>The error information is handled by Logger, which is part of + the Kernel application.</p> <p>The exit reasons (such as <c>badarg</c>) used by the runtime system are described in <seealso marker="doc/reference_manual:errors#exit_reasons"> Errors and Error Handling</seealso>.</p> - <p>For information about the process <c>error_logger</c> and its user - interface (with the same name), see the - <seealso marker="kernel:error_logger">error_logger(3)</seealso> - manual page in Kernel. The system can be configured so that - error information - is written to file or to tty, or both. In addition, user-defined - applications can send and format error information using - <c>error_logger</c>.</p> + <p>For information about Logger and its user + interface, see the + <seealso marker="kernel:logger">logger(3)</seealso> + manual page and + the <seealso marker="kernel:logger_chapter">Logging</seealso> + section in the Kernel User's Guide. The system can be configured so that + log events are + written to file or to tty, or both. In addition, user-defined + applications can send and format log events using + Logger.</p> </section> <section> - <title>SASL Error Logging</title> + <title>Log events from OTP behaviours</title> <p>The standard behaviours (<c>supervisor</c>, <c>gen_server</c>, - and so on) send progress and error information to <c>error_logger</c>. - If the SASL application is started, this information is - written to tty as well. For more information, see + and so on) send progress and error information to + Logger. Progress reports are by default not logged, but can be + enabled by setting the primary log level to <c>info</c>, for + example by using the Kernel configuration + parameter <c>logger_level</c>. Supervisor reports, crash reports + and other error and information reports are by default logged + through the log handler which is set up when the Kernel + application is started.</p> + <p>Prior to Erlang/OTP 21.0, supervisor, crash, and progress + reports were only logged when the SASL application was + running. This behaviour can, for backwards compatibility, be + enabled by setting the Kernel configuration + parameter <seealso marker="kernel:kernel_app#logger_sasl_compatible"> + <c>logger_sasl_compatible</c></seealso> + to <c>true</c>. For more information, see <seealso marker="sasl:error_logging">SASL Error Logging</seealso> in the SASL User's Guide.</p> <pre> -% <input>erl -boot start_sasl</input> -Erlang (BEAM) emulator version 5.4.13 [hipe] [threads:0] [kernel-poll] +% <input>erl -kernel logger_level info</input> +Erlang/OTP 21 [erts-10.0] [source-13c50db] [64-bit] [smp:4:4] [ds:4:4:10] [async-threads:1] [hipe] - -=PROGRESS REPORT==== 31-Mar-2006::12:45:58 === - supervisor: {local,sasl_safe_sup} - started: [{pid,<0.33.0>}, - {name,alarm_handler}, - {mfa,{alarm_handler,start_link,[]}}, - {restart_type,permanent}, - {shutdown,2000}, - {child_type,worker}] - -=PROGRESS REPORT==== 31-Mar-2006::12:45:58 === - supervisor: {local,sasl_safe_sup} - started: [{pid,<0.34.0>}, - {name,overload}, - {mfa,{overload,start_link,[]}}, - {restart_type,permanent}, - {shutdown,2000}, - {child_type,worker}] - -=PROGRESS REPORT==== 31-Mar-2006::12:45:58 === - supervisor: {local,sasl_sup} - started: [{pid,<0.32.0>}, - {name,sasl_safe_sup}, - {mfa,{supervisor, - start_link, - [{local,sasl_safe_sup},sasl,safe]}}, - {restart_type,permanent}, - {shutdown,infinity}, - {child_type,supervisor}] - -=PROGRESS REPORT==== 31-Mar-2006::12:45:58 === - supervisor: {local,sasl_sup} - started: [{pid,<0.35.0>}, - {name,release_handler}, - {mfa,{release_handler,start_link,[]}}, - {restart_type,permanent}, - {shutdown,2000}, - {child_type,worker}] - -=PROGRESS REPORT==== 31-Mar-2006::12:45:58 === - application: sasl - started_at: nonode@nohost -Eshell V5.4.13 (abort with ^G) +=PROGRESS REPORT==== 8-Jun-2018::16:54:19.916404 === + application: kernel + started_at: nonode@nohost +=PROGRESS REPORT==== 8-Jun-2018::16:54:19.922908 === + application: stdlib + started_at: nonode@nohost +=PROGRESS REPORT==== 8-Jun-2018::16:54:19.925755 === + supervisor: {local,kernel_safe_sup} + started: [{pid,<0.74.0>}, + {id,disk_log_sup}, + {mfargs,{disk_log_sup,start_link,[]}}, + {restart_type,permanent}, + {shutdown,1000}, + {child_type,supervisor}] +=PROGRESS REPORT==== 8-Jun-2018::16:54:19.926056 === + supervisor: {local,kernel_safe_sup} + started: [{pid,<0.75.0>}, + {id,disk_log_server}, + {mfargs,{disk_log_server,start_link,[]}}, + {restart_type,permanent}, + {shutdown,2000}, + {child_type,worker}] +Eshell V10.0 (abort with ^G) 1> </pre> </section> </chapter> diff --git a/system/doc/system_principles/misc.xml b/system/doc/system_principles/misc.xml new file mode 100644 index 0000000000..dd6c2a1336 --- /dev/null +++ b/system/doc/system_principles/misc.xml @@ -0,0 +1,198 @@ +<?xml version="1.0" encoding="utf-8" ?> +<!DOCTYPE chapter SYSTEM "chapter.dtd"> + +<chapter> + <header> + <copyright> + <year>2018</year> + <holder>Ericsson AB. All Rights Reserved.</holder> + </copyright> + <legalnotice> + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. + + </legalnotice> + + <title>Support, Compatibility, Deprecations, and Removal</title> + <prepared></prepared> + <responsible></responsible> + <docno></docno> + <approved></approved> + <checked></checked> + <date>2018-05-21</date> + <rev></rev> + <file>misc.xml</file> + </header> + + <section> + <marker id="supported_releases"/> + <title>Supported Releases</title> + <p> + In general, bugs are only fixed on the latest + <seealso marker="versions#releases_and_patches">release</seealso>, + and new features are introduced in the upcoming release that is + under development. However, when we, due to internal reasons, fix + bugs on older releases, these will be available and announced as well. + </p> + <p> + Due to the above, pull requests are only accepted on the + <c>maint</c> and the <c>master</c> branches in our + <url href="https://github.com/erlang/otp">git repository</url>. + The <c>maint</c> branch contains changes planned for the next + <seealso marker="versions#releases_and_patches">maintenance patch package</seealso> + on the latest OTP release and the <c>master</c> branch contain + changes planned for the upcoming OTP release. + </p> + </section> + + <section> + <marker id="compatibility"/> + <title>Compatibility</title> + <p> + We always strive to remain as compatible as possible + even in the cases where we give no compatibility guarantees. + </p> + <p> + Different parts of the system will be handled differently + regarding compatibility. The following items describe how + different parts of the system are handled. + </p> + <taglist> + <tag>Erlang Distribution</tag> + <item> + <p> + Erlang nodes can communicate across at least + two preceding and two subsequent releases. + </p> + </item> + <tag>Compiled BEAM Code, NIF Libraries and Drivers</tag> + <item> + <p> + Compiled code can be loaded on at least two + subsequent releases. + </p> + <p> + Loading on previous releases is <em>not</em> supported. + </p> + </item> + <tag>Compiled HiPE Code</tag> + <item> + <p> + Compiled HiPE code can be loaded on the exact same build + of ERTS that was used when compiling the code. It might + however work on other builds, the emulator verifies + checksums in order to determine if it can load the code + or not. Note that HiPE has some limitations. For more + information see the documentation of the + <seealso marker="hipe:HiPE_app">HiPE</seealso> application. + </p> + </item> + <tag>APIs</tag> + <item> + <p>Compatible between releases.</p> + </item> + <tag>Compiler Warnings</tag> + <item> + <p>New warnings may be issued between releases.</p> + </item> + <tag>Command Line Arguments</tag> + <item> + <p>Incompatible changes may occur between releases.</p> + </item> + <tag>OTP Build Procedures</tag> + <item><p>Incompatible changes may occur between releases.</p></item> + </taglist> + <p> + Under certain circumstances incompatible changes might be + introduced even in parts of the system that should be compatible + between releases. Things that might trigger incompatible changes + like this are: + </p> + <taglist> + <tag>Security Issues</tag> + <item> + <p> + It might be necessary to introduce incompatible changes + in order to solve a security issue. This kind of + incompatibility might occur in a patch. + </p> + </item> + <tag>Bug Fixes</tag> + <item> + <p> + We will not be bug-compatible. A bug fix might introduce + incompatible changes. This kind of incompatibility + might occur in a patch. + </p> + </item> + <tag>Severe Previous Design Issues</tag> + <item> + <p> + Some parts of OTP were designed a very long time ago and + did not necessarily take today's computing environments into + account. In some cases the consequences of those design + decisions are too severe. This may be performance wise, + scalability wise, etc. If we deem the consequences too + severe, we might introduce incompatible changes. This kind + of incompatibility will not be introduced in a patch, but + instead in the next release. + </p> + </item> + </taglist> + <p> + Peripheral, trace, and debug functionality is at greater + risk of being changed in an incompatible way than functionality + in the language itself and core libraries used during operation. + </p> + </section> + + <section> + <marker id="deprecation"/> + <title>Deprecation</title> + <p> + Functionality is deprecated when new functionality is + introduced that is preferred to be used instead of the + old functionality that is being deprecated. The deprecation + does <em>not</em> imply removal of the functionality unless + an upcoming removal is explicitly stated in the deprecation. + </p> + <p> + Deprecated functionality will be documented as deprecated, and + compiler warnings will be issued, when appropriate, as + early as possible. That is, the new preferred functionality + will appear at the same time as the deprecation is issued. + A new deprecation will at least be announced in a release + note and the documentation. + </p> + </section> + + <section> + <marker id="removal"/> + <title>Removal</title> + <p> + Legacy solutions may eventually need to be removed. In such + cases, they will be phased out on a long enough time period + to give users the time to adapt. Before removal of + functionality it will be deprecated at least during one + release with an explicit announcement about + the upcoming removal. A new deprecation will at least be + announced in a release note and the documentation. + </p> + <p> + Peripheral, trace, and debug functionality is at greater + risk of removal than functionality in the language itself + and core libraries used during operation. + </p> + </section> + +</chapter> + diff --git a/system/doc/system_principles/part.xml b/system/doc/system_principles/part.xml index 1b87ecd350..6699389eec 100644 --- a/system/doc/system_principles/part.xml +++ b/system/doc/system_principles/part.xml @@ -4,7 +4,7 @@ <part xmlns:xi="http://www.w3.org/2001/XInclude"> <header> <copyright> - <year>1997</year><year>2016</year> + <year>1997</year><year>2018</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -34,4 +34,5 @@ <xi:include href="create_target.xml"/> <xi:include href="upgrade.xml"/> <xi:include href="versions.xml"/> + <xi:include href="misc.xml"/> </part> diff --git a/system/doc/system_principles/system_principles.xml b/system/doc/system_principles/system_principles.xml index 3605df3ade..500522d778 100644 --- a/system/doc/system_principles/system_principles.xml +++ b/system/doc/system_principles/system_principles.xml @@ -4,7 +4,7 @@ <chapter> <header> <copyright> - <year>1996</year><year>2015</year> + <year>1996</year><year>2018</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -93,7 +93,7 @@ init:stop()</pre> {progress,kernel_load_completed} {progress,modules_loaded} {start,heart} -{start,error_logger} +{start,logger} ...</pre> <p>For a detailed description of the syntax and contents of the boot script, see the <c>script(4)</c> manual page in SASL.</p> diff --git a/system/doc/system_principles/versions.xml b/system/doc/system_principles/versions.xml index b9f7fa4bf6..fbdcc6b2b0 100644 --- a/system/doc/system_principles/versions.xml +++ b/system/doc/system_principles/versions.xml @@ -4,7 +4,7 @@ <chapter> <header> <copyright> - <year>2014</year><year>2016</year> + <year>2014</year><year>2018</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -32,9 +32,9 @@ <rev></rev> <file>versions.xml</file> </header> - <marker id="versions section"></marker> <section> + <marker id="versions section"></marker> <title>OTP Version</title> <p>As of OTP release 17, the OTP release number corresponds to the major part of the OTP version. The OTP version as a concept was @@ -136,8 +136,8 @@ </section> <section> - <title>Version Scheme</title> <marker id="version_scheme"/> + <title>Version Scheme</title> <note><p>The version scheme was changed as of OTP 17.0. This implies that application versions used prior to OTP 17.0 do not adhere to this version scheme. <seealso marker="#otp_17_0_app_versions">A list of @@ -181,7 +181,7 @@ goes for application versions.</p> <p>In general, versions can have more than three parts. The versions are then only partially ordered. Such - versions are only used in exceptional cases. When an extra + versions are only used when branching off from another branch. When an extra part (out of the normal three parts) is added to a version number, a new branch of versions is made. The new branch has a linear order against the base version. However, versions on different @@ -207,8 +207,68 @@ </section> <section> - <title>OTP 17.0 Application Versions</title> + <marker id="releases_and_patches"/> + <title>Releases and Patches</title> + <p> + When a new OTP release is released it will have an OTP + version on the form <c><Major>.0</c> where the + major OTP version number equals the release number. + The major version number is increased one step since the + last major version. All other OTP versions with the same + major OTP version number are patches on that OTP release. + </p> + <p> + Patches are either released as maintenance patch packages + or emergency patch packages. The only difference is that + maintenance patch packages are planned and usually contain + more changes than emergency patch packages. Emergency patch + packages are released to solve one or more specific issues + when such are discovered. + </p> + <p> + The release of a maintenance patch package usually imply + an increase of the OTP <c><Minor></c> version while + the release of an emergency patch package usually imply an + increase of the OTP <c><Patch></c> version. This is + however not necessarily always the case since changes of + OTP versions are based on the actual changes in the code + and not based on whether the patch was planned or not. + For more information see the + <seealso marker="#version_scheme">Version Scheme</seealso> + section above. + </p> + </section> + + <section> + <marker id="otp_versions_tree"/> + <title>OTP Versions Tree</title> + <p> + All released OTP versions can be found in the + <url href="http://www.erlang.org/download/otp_versions_tree.html">OTP + Versions Tree</url> which is automatically updated whenever + we release a new OTP version. Note that every version number as + such explicitly define its position in the version tree. Nothing + more than the version numbers are needed in order to construct + the tree. The root of the tree is OTP version 17.0 which is when + we introduced the new + <seealso marker="#version_scheme">version scheme</seealso>. The + green versions are normal versions released on the main track. + Old <seealso marker="#releases_and_patches">OTP releases</seealso> + will be maintained for a while on <c>maint</c> branches that have + branched off from the main track. Old <c>maint</c> branches always + branch off from the main track when the next OTP release is + introduced into the main track. Versions on these old <c>maint</c> + branches are marked blue. Besides the green and blue versions, + there are also gray versions. These are versions on branches + introduced in order to fix a specific problem for a specific + customer on a specific base version. Branches with gray versions + will typically become dead ends very quickly if not immediately. + </p> + </section> + + <section> <marker id="otp_17_0_app_versions"/> + <title>OTP 17.0 Application Versions</title> <p>The following list details the application versions that were part of OTP 17.0. If the normal part of an application version number compares diff --git a/system/doc/system_principles/xmlfiles.mk b/system/doc/system_principles/xmlfiles.mk index c3c3bb4731..353c2c7f7f 100644 --- a/system/doc/system_principles/xmlfiles.mk +++ b/system/doc/system_principles/xmlfiles.mk @@ -1,7 +1,7 @@ # # %CopyrightBegin% # -# Copyright Ericsson AB 2009-2016. All Rights Reserved. +# Copyright Ericsson AB 2009-2018. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -20,6 +20,9 @@ SYSTEM_PRINCIPLES_CHAPTER_FILES = \ system_principles.xml \ error_logging.xml \ - create_target.xml \ upgrade.xml \ - versions.xml + versions.xml \ + misc.xml + +SYSTEM_PRINCIPLES_CHAPTER_GEN_FILES = \ + create_target.xml diff --git a/system/doc/top/Makefile b/system/doc/top/Makefile index ff8b0c3cd6..3267bf96df 100644 --- a/system/doc/top/Makefile +++ b/system/doc/top/Makefile @@ -1,7 +1,7 @@ # # %CopyrightBegin% # -# Copyright Ericsson AB 1999-2016. All Rights Reserved. +# Copyright Ericsson AB 1999-2018. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -53,30 +53,45 @@ include ../oam/xmlfiles.mk BOOK_FILES = book.xml XML_FILES = \ - $(INST_GUIDE_CHAPTER_FILES:%=../installation_guide/%) \ - $(SYSTEM_PRINCIPLES_CHAPTER_FILES:%=../system_principles/%) \ - $(EMBEDDED_CHAPTER_FILES:%=../embedded/%) \ - $(GETTING_STARTED_CHAPTER_FILES:%=../getting_started/%) \ - $(REF_MAN_CHAPTER_FILES:%=../reference_manual/%) \ - $(PROG_EX_CHAPTER_FILES:%=../programming_examples/%) \ - $(EFF_GUIDE_CHAPTER_FILES:%=../efficiency_guide/%) \ - $(TUTORIAL_CHAPTER_FILES:%=../tutorial/%) \ - $(DESIGN_PRINCIPLES_CHAPTER_FILES:%=../design_principles/%) \ - $(OAM_CHAPTER_FILES:%=../oam/%) \ - ../installation_guide/part.xml \ - ../system_principles/part.xml \ - ../embedded/part.xml \ - ../getting_started/part.xml \ - ../reference_manual/part.xml \ - ../programming_examples/part.xml \ - ../efficiency_guide/part.xml \ - ../tutorial/part.xml \ - ../design_principles/part.xml \ - ../oam/part.xml \ $(BOOK_FILES) - -XMLLINT_SRCDIRS= ../installation_guide:../system_principles:../embedded:../getting_started:../reference_manual:../programming_examples:../efficiency_guide:../tutorial:../design_principles:../oam +XML_GUIDE_FILES = \ + $(INST_GUIDE_CHAPTER_FILES:%=installation_guide/%) \ + $(INST_GUIDE_CHAPTER_GEN_FILES:%=installation_guide/%) \ + $(SYSTEM_PRINCIPLES_CHAPTER_FILES:%=system_principles/%) \ + $(SYSTEM_PRINCIPLES_CHAPTER_GEN_FILES:%=system_principles/%) \ + $(EMBEDDED_CHAPTER_FILES:%=embedded/%) \ + $(EMBEDDED_CHAPTER_GEN_FILES:%=embedded/%) \ + $(GETTING_STARTED_CHAPTER_FILES:%=getting_started/%) \ + $(GETTING_STARTED_CHAPTER_GEN_FILES:%=getting_started/%) \ + $(REF_MAN_CHAPTER_FILES:%=reference_manual/%) \ + $(REF_MAN_CHAPTER_GEN_FILES:%=reference_manual/%) \ + $(PROG_EX_CHAPTER_FILES:%=programming_examples/%) \ + $(PROG_EX_CHAPTER_GEN_FILES:%=programming_examples/%) \ + $(EFF_GUIDE_CHAPTER_FILES:%=efficiency_guide/%) \ + $(EFF_GUIDE_CHAPTER_GEN_FILES:%=efficiency_guide/%) \ + $(TUTORIAL_CHAPTER_FILES:%=tutorial/%) \ + $(TUTORIAL_CHAPTER_GEN_FILES:%=tutorial/%) \ + $(DESIGN_PRINCIPLES_CHAPTER_FILES:%=design_principles/%) \ + $(DESIGN_PRINCIPLES_CHAPTER_GEN_FILES:%=design_principles/%) \ + $(OAM_CHAPTER_FILES:%=oam/%) \ + $(OAM_CHAPTER_GEN_FILES:%=oam/%) + +XML_GEN_FILES = \ + $(XML_GUIDE_FILES:%=$(XMLDIR)/%) \ + $(XMLDIR)/installation_guide/part.xml \ + $(XMLDIR)/system_principles/part.xml \ + $(XMLDIR)/embedded/part.xml \ + $(XMLDIR)/getting_started/part.xml \ + $(XMLDIR)/reference_manual/part.xml \ + $(XMLDIR)/programming_examples/part.xml \ + $(XMLDIR)/efficiency_guide/part.xml \ + $(XMLDIR)/tutorial/part.xml \ + $(XMLDIR)/design_principles/part.xml \ + $(XMLDIR)/oam/part.xml + + +XMLLINT_SRCDIRS= $(XMLDIR)/installation_guide:$(XMLDIR)/system_principles:$(XMLDIR)/embedded:$(XMLDIR)/getting_started:$(XMLDIR)/reference_manual:$(XMLDIR)/programming_examples:$(XMLDIR)/efficiency_guide:$(XMLDIR)/tutorial:$(XMLDIR)/design_principles:$(XMLDIR)/oam HTMLDIR= ../html PDFREFDIR= pdf @@ -247,7 +262,8 @@ debug opt: clean: $(RM) ../html/js/*.js - $(RM) PR.template + $(RM) PR.template + $(RM) $(XMLDIR)/*.xml $(RM) $(INDEX_FILES) $(MAN_INDEX) $(RM) $(TOP_PDF_FILE) $(TOP_PDF_FILE:%.pdf=%.fo) $(RM) $(INDEX_SCRIPT) $(GLOSSARY_SCRIPT) $(JAVASCRIPT_BUILD_SCRIPT) diff --git a/system/doc/top/book.xml b/system/doc/top/book.xml index c94b0f24d6..61e75591ef 100644 --- a/system/doc/top/book.xml +++ b/system/doc/top/book.xml @@ -4,7 +4,7 @@ <book xmlns:xi="http://www.w3.org/2001/XInclude"> <header titlestyle="normal"> <copyright> - <year>1997</year><year>2016</year> + <year>1997</year><year>2018</year> <holder>Ericsson AB. All Rights Reserved.</holder> </copyright> <legalnotice> @@ -36,16 +36,16 @@ <contents level="2"></contents> </preamble> <parts lift="no"> - <xi:include href="../installation_guide/part.xml"/> - <xi:include href="../system_principles/part.xml"/> - <xi:include href="../embedded/part.xml"/> - <xi:include href="../getting_started/part.xml"/> - <xi:include href="../reference_manual/part.xml"/> - <xi:include href="../programming_examples/part.xml"/> - <xi:include href="../efficiency_guide/part.xml"/> - <xi:include href="../tutorial/part.xml"/> - <xi:include href="../design_principles/part.xml"/> - <xi:include href="../oam/part.xml"/> + <xi:include href="../xml/installation_guide/part.xml"/> + <xi:include href="../xml/system_principles/part.xml"/> + <xi:include href="../xml/embedded/part.xml"/> + <xi:include href="../xml/getting_started/part.xml"/> + <xi:include href="../xml/reference_manual/part.xml"/> + <xi:include href="../xml/programming_examples/part.xml"/> + <xi:include href="../xml/efficiency_guide/part.xml"/> + <xi:include href="../xml/tutorial/part.xml"/> + <xi:include href="../xml/design_principles/part.xml"/> + <xi:include href="../xml/oam/part.xml"/> </parts> <listofterms></listofterms> <index></index> diff --git a/system/doc/tutorial/Makefile b/system/doc/tutorial/Makefile index 2eeb096e23..4c62deeffd 100644 --- a/system/doc/tutorial/Makefile +++ b/system/doc/tutorial/Makefile @@ -1,7 +1,7 @@ # # %CopyrightBegin% # -# Copyright Ericsson AB 2000-2016. All Rights Reserved. +# Copyright Ericsson AB 2000-2018. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -28,6 +28,7 @@ include $(ERL_TOP)/erts/vsn.mk #VSN=$(SYSTEM_VSN) APPLICATION=otp-system-documentation +XMLDIR := $(XMLDIR)/tutorial # ---------------------------------------------------- # Release directory specification # ---------------------------------------------------- @@ -53,6 +54,9 @@ XML_FILES = \ $(BOOK_FILES) $(XML_CHAPTER_FILES) \ $(XML_PART_FILES) +XML_GEN_FILES = \ + $(TUTORIAL_CHAPTER_GEN_FILES:%=$(XMLDIR)/%) + # ---------------------------------------------------- C_FILES = \ @@ -104,6 +108,7 @@ gifs: $(GIF_FILES:%=$(HTMLDIR)/%) debug opt: clean clean_docs: + rm -f $(XMLDIR)/*.xml rm -f $(HTMLDIR)/*.gif $(HTMLDIR)/*.html rm -f $(TOP_PDF_FILE) $(TOP_PDF_FILE:%.pdf=%.fo) rm -f errs core *~ diff --git a/system/doc/tutorial/port_driver.c b/system/doc/tutorial/port_driver.c index 37de67310f..8b441733ed 100644 --- a/system/doc/tutorial/port_driver.c +++ b/system/doc/tutorial/port_driver.c @@ -51,8 +51,7 @@ ErlDrvEntry example_driver_entry = { queue */ NULL, /* F_PTR call, much like control, sync call to driver */ - NULL, /* F_PTR event, called when an event selected - by driver_event() occurs. */ + NULL, /* unused */ ERL_DRV_EXTENDED_MARKER, /* int extended marker, Should always be set to indicate driver versioning */ ERL_DRV_EXTENDED_MAJOR_VERSION, /* int major_version, should always be diff --git a/system/doc/tutorial/xmlfiles.mk b/system/doc/tutorial/xmlfiles.mk index f8ed7be064..74e174f6d4 100644 --- a/system/doc/tutorial/xmlfiles.mk +++ b/system/doc/tutorial/xmlfiles.mk @@ -1,7 +1,7 @@ # # %CopyrightBegin% # -# Copyright Ericsson AB 2009-2016. All Rights Reserved. +# Copyright Ericsson AB 2009-2018. All Rights Reserved. # # Licensed under the Apache License, Version 2.0 (the "License"); # you may not use this file except in compliance with the License. @@ -19,13 +19,16 @@ # TUTORIAL_CHAPTER_FILES = \ introduction.xml\ + overview.xml + +TUTORIAL_CHAPTER_GEN_FILES = \ cnode.xml\ c_port.xml\ erl_interface.xml \ c_portdriver.xml \ example.xml\ - overview.xml\ nif.xml + # appendix.xml # distribution.xml (to be part of tutorial later) diff --git a/system/doc/xml/design_principles/.gitignore b/system/doc/xml/design_principles/.gitignore new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/system/doc/xml/design_principles/.gitignore diff --git a/system/doc/xml/efficiency_guide/.gitignore b/system/doc/xml/efficiency_guide/.gitignore new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/system/doc/xml/efficiency_guide/.gitignore diff --git a/system/doc/xml/embedded/.gitignore b/system/doc/xml/embedded/.gitignore new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/system/doc/xml/embedded/.gitignore diff --git a/system/doc/xml/getting_started/.gitignore b/system/doc/xml/getting_started/.gitignore new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/system/doc/xml/getting_started/.gitignore diff --git a/system/doc/xml/installation_guide/.gitignore b/system/doc/xml/installation_guide/.gitignore new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/system/doc/xml/installation_guide/.gitignore diff --git a/system/doc/xml/oam/.gitignore b/system/doc/xml/oam/.gitignore new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/system/doc/xml/oam/.gitignore diff --git a/system/doc/xml/programming_examples/.gitignore b/system/doc/xml/programming_examples/.gitignore new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/system/doc/xml/programming_examples/.gitignore diff --git a/system/doc/xml/reference_manual/.gitignore b/system/doc/xml/reference_manual/.gitignore new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/system/doc/xml/reference_manual/.gitignore diff --git a/system/doc/xml/system_architecture_intro/.gitignore b/system/doc/xml/system_architecture_intro/.gitignore new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/system/doc/xml/system_architecture_intro/.gitignore diff --git a/system/doc/xml/system_principles/.gitignore b/system/doc/xml/system_principles/.gitignore new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/system/doc/xml/system_principles/.gitignore diff --git a/system/doc/xml/tutorial/.gitignore b/system/doc/xml/tutorial/.gitignore new file mode 100644 index 0000000000..e69de29bb2 --- /dev/null +++ b/system/doc/xml/tutorial/.gitignore |
