diff options
Diffstat (limited to 'xcomp/erl-xcomp-sfk-linux-ose5.conf')
| -rw-r--r-- | xcomp/erl-xcomp-sfk-linux-ose5.conf | 305 |
1 files changed, 0 insertions, 305 deletions
diff --git a/xcomp/erl-xcomp-sfk-linux-ose5.conf b/xcomp/erl-xcomp-sfk-linux-ose5.conf deleted file mode 100644 index a4d64e5636..0000000000 --- a/xcomp/erl-xcomp-sfk-linux-ose5.conf +++ /dev/null @@ -1,305 +0,0 @@ -## -*-shell-script-*- -## -## %CopyrightBegin% -## -## Copyright Ericsson AB 2009-2012. All Rights Reserved. -## -## Licensed under the Apache License, Version 2.0 (the "License"); -## you may not use this file except in compliance with the License. -## You may obtain a copy of the License at -## -## http://www.apache.org/licenses/LICENSE-2.0 -## -## Unless required by applicable law or agreed to in writing, software -## distributed under the License is distributed on an "AS IS" BASIS, -## WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. -## See the License for the specific language governing permissions and -## limitations under the License. -## -## %CopyrightEnd% -## -## File: erl-xcomp-sfk-linux-ose5.conf -## Author: Petre Pircalabu -## -## ----------------------------------------------------------------------------- -## When cross compiling Erlang/OTP using `otp_build', copy this file and set -## the variables needed below. Then pass the path to the copy of this file as -## an argument to `otp_build' in the configure stage: -## `otp_build configure --xcomp-conf=<FILE>' -## ----------------------------------------------------------------------------- - -## Note that you cannot define arbitrary variables in a cross compilation -## configuration file. Only the ones listed below will be guaranteed to be -## visible throughout the whole execution of all `configure' scripts. Other -## variables needs to be defined as arguments to `configure' or exported in -## the environment. - -## -- Variables needed for an OSE5 build --------------------------------------- -OSEROOT="/vobs/ose5/system" -HOST="linux" -GCCVERSION="4.6.3" -GCCROOT="${OSEROOT}/gcc_linux_x86_${GCCVERSION}" -GCCTARGET="i386-elf" - -## -- Variables for `otp_build' Only ------------------------------------------- - -## Variables in this section are only used, when configuring Erlang/OTP for -## cross compilation using `$ERL_TOP/otp_build configure'. - -## *NOTE*! These variables currently have *no* effect if you configure using -## the `configure' script directly. - -# * `erl_xcomp_build' - The build system used. This value will be passed as -# `--build=$erl_xcomp_build' argument to the `configure' script. It does -# not have to be a full `CPU-VENDOR-OS' triplet, but can be. The full -# `CPU-VENDOR-OS' triplet will be created by -# `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_build'. If set to `guess', -# the build system will be guessed using -# `$ERL_TOP/erts/autoconf/config.guess'. -erl_xcomp_build=guess - -# * `erl_xcomp_host' - Cross host/target system to build for. This value will -# be passed as `--host=$erl_xcomp_host' argument to the `configure' script. -# It does not have to be a full `CPU-VENDOR-OS' triplet, but can be. The -# full `CPU-VENDOR-OS' triplet will be created by -# `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_host'. -erl_xcomp_host="$GCCTARGET-ose" - -# * `erl_xcomp_configure_flags' - Extra configure flags to pass to the -# `configure' script. -erl_xcomp_configure_flags="--disable-threads --disable-smp-support --disable-kernel-poll --disable-hipe --without-termcap --without-javac --disable-dynamic-ssl-lib --disable-shared-zlib --without-ssl --enable-static-nifs --enable-static-nifs=$ERL_TOP/lib/asn1/priv/lib/powerpc-unknown-ose/asn1rt_nif.a" - -## -- Cross Compiler and Other Tools ------------------------------------------- - -## If the cross compilation tools are prefixed by `<HOST>-' you probably do -## not need to set these variables (where `<HOST>' is what has been passed as -## `--host=<HOST>' argument to `configure'). - -## All variables in this section can also be used when native compiling. - -# * `CC' - C compiler. -CC="$GCCROOT/bin/$GCCTARGET-gcc" - -# * `CFLAGS' - C compiler flags. -CFLAGS="-g -fno-strict-aliasing -fno-builtin -fshort-wchar -Wall -Wno-unknown-pragmas -I$GCCROOT/include/c++/$GCCVERSION -I$OSEROOT/include -I$OSEROOT/include/ose_spi -I$OSEROOT/include/gcc -MD -MP -D__OSE__ -DLITTLE_ENDIAN -DCF_CONF_SIZE=0x800" - -# * `STATIC_CFLAGS' - Static C compiler flags. -#STATIC_CFLAGS= - -# * `CFLAG_RUNTIME_LIBRARY_PATH' - This flag should set runtime library -# search path for the shared libraries. Note that this actually is a -# linker flag, but it needs to be passed via the compiler. -#CFLAG_RUNTIME_LIBRARY_PATH= - -# * `CPP' - C pre-processor. -#CPP= - -# * `CPPFLAGS' - C pre-processor flags. -CPPFLAGS="-g -fno-strict-aliasing -fno-builtin -fshort-wchar -Wall -Wno-unknown-pragmas -I$GCCROOT/include/c++/$GCCVERSION -I$OSEROOT/include -I$OSEROOT/include/ose_spi -I$OSEROOT/include/gcc -MD -MP -D__OSE__ -DLITTLE_ENDIAN -DCF_CONF_SIZE=0x800" - -# * `CXX' - C++ compiler. -#CXX= - -# * `CXXFLAGS' - C++ compiler flags. -CXXFLAGS="-g -fno-strict-aliasing -ansi -I$GCCROOT/include/c++/$GCCVERSION -I$OSEROOT/include -I$OSEROOT/include/gcc " - -# * `LD' - Linker. -LD="$GCCROOT/bin/$GCCTARGET-ld" - -# * `LDFLAGS' - Linker flags. -LDFLAGS="-Wl,-ecrt0_lm -Wl,-T,$ERL_TOP/erts/emulator/sys/ose/gcc_lm_x86_$GCCVERSION.lcf" - -# * `LIBS' - Libraries. -LIBS="$OSEROOT/lib/x86/libcrt.a $OSEROOT/lib/x86/libm.a $GCCROOT/lib/gcc/$GCCTARGET/$GCCVERSION/libgcc.a" - -## -- *D*ynamic *E*rlang *D*river Linking -- - -## *NOTE*! Either set all or none of the `DED_LD*' variables. - -# * `DED_LD' - Linker for Dynamically loaded Erlang Drivers. -#DED_LD= - -# * `DED_LDFLAGS' - Linker flags to use with `DED_LD'. -#DED_LDFLAGS= - -# * `DED_LD_FLAG_RUNTIME_LIBRARY_PATH' - This flag should set runtime library -# search path for shared libraries when linking with `DED_LD'. -#DED_LD_FLAG_RUNTIME_LIBRARY_PATH= - -## -- Large File Support -- - -## *NOTE*! Either set all or none of the `LFS_*' variables. - -# * `LFS_CFLAGS' - Large file support C compiler flags. -#LFS_CFLAGS= - -# * `LFS_LDFLAGS' - Large file support linker flags. -#LFS_LDFLAGS= - -# * `LFS_LIBS' - Large file support libraries. -#LFS_LIBS= - -## -- Other Tools -- - -# * `RANLIB' - `ranlib' archive index tool. -RANLIB="$GCCROOT/bin/$GCCTARGET-ranlib" - -# * `AR' - `ar' archiving tool. -AR="$GCCROOT/bin/$GCCTARGET-ar" - -# * `STRIP' - `strip -STRIP="$GCCROOT/bin/$GCCTARGET-strip" - -# * `GETCONF' - `getconf' system configuration inspection tool. `getconf' is -# currently used for finding out large file support flags to use, and -# on Linux systems for finding out if we have an NPTL thread library or -# not. -#GETCONF= - -## -- Cross System Root Locations ---------------------------------------------- - -# * `erl_xcomp_sysroot' - The absolute path to the system root of the cross -# compilation environment. Currently, the `crypto', `odbc', `ssh' and -# `ssl' applications need the system root. These applications will be -# skipped if the system root has not been set. The system root might be -# needed for other things too. If this is the case and the system root -# has not been set, `configure' will fail and request you to set it. -erl_xcomp_sysroot="$OSEROOT" - -# * `erl_xcomp_isysroot' - The absolute path to the system root for includes -# of the cross compilation environment. If not set, this value defaults -# to `$erl_xcomp_sysroot', i.e., only set this value if the include system -# root path is not the same as the system root path. -erl_xcomp_isysroot="$OSEROOT/include" - -## -- Optional Feature, and Bug Tests ------------------------------------------ - -## These tests cannot (always) be done automatically when cross compiling. You -## usually do not need to set these variables. Only set these if you really -## know what you are doing. - -## Note that some of these values will override results of tests performed -## by `configure', and some will not be used until `configure' is sure that -## it cannot figure the result out. - -## The `configure' script will issue a warning when a default value is used. -## When a variable has been set, no warning will be issued. - -# * `erl_xcomp_after_morecore_hook' - `yes|no'. Defaults to `no'. If `yes', -# the target system must have a working `__after_morecore_hook' that can be -# used for tracking used `malloc()' implementations core memory usage. -# This is currently only used by unsupported features. -#erl_xcomp_after_morecore_hook= - -# * `erl_xcomp_bigendian' - `yes|no'. No default. If `yes', the target system -# must be big endian. If `no', little endian. This can often be -# automatically detected, but not always. If not automatically detected, -# `configure' will fail unless this variable is set. Since no default -# value is used, `configure' will try to figure this out automatically. -#erl_xcomp_bigendian= - -# * `erl_xcomp_double_middle` - `yes|no`. No default. If `yes`, the -# target system must have doubles in "middle-endian" format. If -# `no`, it has "regular" endianness. This can often be automatically -# detected, but not always. If not automatically detected, -# `configure` will fail unless this variable is set. Since no -# default value is used, `configure` will try to figure this out -# automatically. -#erl_xcomp_double_middle_endian - -# * `erl_xcomp_clock_gettime_cpu_time' - `yes|no'. Defaults to `no'. If `yes', -# the target system must have a working `clock_gettime()' implementation -# that can be used for retrieving process CPU time. -#erl_xcomp_clock_gettime_cpu_time= - -# * `erl_xcomp_getaddrinfo' - `yes|no'. Defaults to `no'. If `yes', the target -# system must have a working `getaddrinfo()' implementation that can -# handle both IPv4 and IPv6. -#erl_xcomp_getaddrinfo= - -# * `erl_xcomp_gethrvtime_procfs_ioctl' - `yes|no'. Defaults to `no'. If `yes', -# the target system must have a working `gethrvtime()' implementation and -# is used with procfs `ioctl()'. -#erl_xcomp_gethrvtime_procfs_ioctl= - -# * `erl_xcomp_dlsym_brk_wrappers' - `yes|no'. Defaults to `no'. If `yes', the -# target system must have a working `dlsym(RTLD_NEXT, <S>)' implementation -# that can be used on `brk' and `sbrk' symbols used by the `malloc()' -# implementation in use, and by this track the `malloc()' implementations -# core memory usage. This is currently only used by unsupported features. -#erl_xcomp_dlsym_brk_wrappers= - -# * `erl_xcomp_kqueue' - `yes|no'. Defaults to `no'. If `yes', the target -# system must have a working `kqueue()' implementation that returns a file -# descriptor which can be used by `poll()' and/or `select()'. If `no' and -# the target system has not got `epoll()' or `/dev/poll', the kernel-poll -# feature will be disabled. -#erl_xcomp_kqueue= - -# * `erl_xcomp_linux_clock_gettime_correction' - `yes|no'. Defaults to `yes' on -# Linux; otherwise, `no'. If `yes', `clock_gettime(CLOCK_MONOTONIC, _)' on -# the target system must work. This variable is recommended to be set to -# `no' on Linux systems with kernel versions less than 2.6. -#erl_xcomp_linux_clock_gettime_correction= - -# * `erl_xcomp_linux_nptl' - `yes|no'. Defaults to `yes' on Linux; otherwise, -# `no'. If `yes', the target system must have NPTL (Native POSIX Thread -# Library). Older Linux systems have LinuxThreads instead of NPTL (Linux -# kernel versions typically less than 2.6). -#erl_xcomp_linux_nptl= - -# * `erl_xcomp_linux_usable_sigaltstack' - `yes|no'. Defaults to `yes' on Linux; -# otherwise, `no'. If `yes', `sigaltstack()' must be usable on the target -# system. `sigaltstack()' on Linux kernel versions less than 2.4 are -# broken. -#erl_xcomp_linux_usable_sigaltstack= - -# * `erl_xcomp_linux_usable_sigusrx' - `yes|no'. Defaults to `yes'. If `yes', -# the `SIGUSR1' and `SIGUSR2' signals must be usable by the ERTS. Old -# LinuxThreads thread libraries (Linux kernel versions typically less than -# 2.2) used these signals and made them unusable by the ERTS. -#erl_xcomp_linux_usable_sigusrx= - -# * `erl_xcomp_poll' - `yes|no'. Defaults to `no' on Darwin/MacOSX; otherwise, -# `yes'. If `yes', the target system must have a working `poll()' -# implementation that also can handle devices. If `no', `select()' will be -# used instead of `poll()'. -erl_xcomp_poll=no - -# * `erl_xcomp_putenv_copy' - `yes|no'. Defaults to `no'. If `yes', the target -# system must have a `putenv()' implementation that stores a copy of the -# key/value pair. -#erl_xcomp_putenv_copy= - -# * `erl_xcomp_reliable_fpe' - `yes|no'. Defaults to `no'. If `yes', the target -# system must have reliable floating point exceptions. -#erl_xcomp_reliable_fpe= - -# * `erl_xcomp_ose_ldflags_pass1` - Linker flags for the OSE module (pass 1) -erl_xcomp_ose_ldflags_pass1="-r --no-omagic" - -# * `erl_xcomp_ose_ldflags_pass2` - Linker flags for the OSE module (pass 2) -erl_xcomp_ose_ldflags_pass2="-n --emit-relocs -ecrt0_lm --no-omagic" - -# * `erl_xcomp_ose_OSEROOT` - OSE installation root directory -erl_xcomp_ose_OSEROOT="$OSEROOT" - -# * `erl_xcomp_ose_STRIP` - Strip utility shipped with the OSE distribution -erl_xcomp_ose_STRIP="$GCCROOT/bin/$GCCTARGET-strip" - -# * `erl_xcomp_ose_LM_POST_LINK` - OSE postlink tool -erl_xcomp_ose_LM_POST_LINK="$OSEROOT/bin/$HOST/lm_post_link" - -# * `erl_xcomp_ose_LM_SET_CONF` - OSE load module configuration tool -erl_xcomp_ose_LM_SET_CONF="$OSEROOT/bin/$HOST/lm_set_conf" - -# * `erl_xcomp_ose_LM_GET_CONF` - OSE load module elf size tool -erl_xcomp_ose_LM_ELF_SIZE="$OSEROOT/bin/$HOST/lm_elf_size" - -# * `erl_xcomp_ose_LM_LCF` - OSE load module linker configuration file -erl_xcomp_ose_LM_LCF="${ERL_TOP}/erts/emulator/sys/ose/gcc_lm_x86_$GCCVERSION.lcf" - -# * `erl_xcomp_ose_LM_CONF` - OSE load module default configuration file -erl_xcomp_ose_LM_CONF="${ERL_TOP}/erts/emulator/sys/ose/default.lmconf" - -## ----------------------------------------------------------------------------- |