1 files changed, 236 insertions, 0 deletions
diff --git a/xcomp/erl-xcomp-x86_64-saf-linux-gnu.conf b/xcomp/erl-xcomp-x86_64-saf-linux-gnu.conf
new file mode 100644
index 0000000000..b6730cff0a
--- /dev/null
+++ b/xcomp/erl-xcomp-x86_64-saf-linux-gnu.conf
@@ -0,0 +1,236 @@
+#### -*-shell-script-*-
+####
+#### %CopyrightBegin%
+####
+#### Copyright Ericsson AB 2010. All Rights Reserved.
+####
+#### The contents of this file are subject to the Erlang Public License,
+#### Version 1.1, (the "License"); you may not use this file except in
+#### compliance with the License. You should have received a copy of the
+#### Erlang Public License along with this software. If not, it can be
+#### retrieved online at http://www.erlang.org/.
+####
+#### Software distributed under the License is distributed on an "AS IS"
+#### basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+#### the License for the specific language governing rights and limitations
+#### under the License.
+####
+#### %CopyrightEnd%
+####
+#### File: erl-xcomp-x86_64-saf-linux-gnu.conf
+#### Author: Rickard Green
+####
+#### --------------------------------------------------------------------------
+#### When cross compiling Erlang/OTP using `otp_build', copy this file and set
+#### the variables needed below. Then pass the path to the copy of this file as
+#### an argument to `otp_build' in the configure stage:
+####   `otp_build configure --xcomp-conf=<FILE>'
+#### --------------------------------------------------------------------------
+
+### Note that you cannot define arbitrary variables in a cross compilation
+### configuration file. Only the ones listed below will be guaranteed to be
+### visible throughout the whole execution of all `configure' scripts. Other
+### variables needs to be defined as arguments to `configure' or exported in
+### the environment.
+
+### ---- `otp_build' only variables -------------------------------------------
+
+### Variables in this section are only used, when configuring Erlang/OTP for
+### cross compilation using `$ERL_TOP/otp_build configure'.
+
+### NOTE! These variables currently have *no* effect if you configure using the
+### `configure' script directly.
+
+## erl_xcomp_build - Build system.
+##    This value will be passed as `--build=$erl_xcomp_build' argument to the
+##    `configure' script. It does not have to be a full CPU-VENDOR-OS triplet,
+##    but can be. The full CPU-VENDOR-OS triplet will be created by:
+##      `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_build'
+##    If `erl_xcomp_build=guess', the build system will be guessed using:
+##      `$ERL_TOP/erts/autoconf/config.guess'. 
+erl_xcomp_build=guess
+
+## erl_xcomp_host - Cross host system.
+##    This value will be passed as `--host=$erl_xcomp_host' argument to the
+##    `configure' script. It does not have to be a full CPU-VENDOR-OS triplet,
+##    but can be. The full CPU-VENDOR-OS triplet will be created by:
+##      `$ERL_TOP/erts/autoconf/config.sub $erl_xcomp_host'
+erl_xcomp_host=x86_64-saf-linux-gnu
+
+## erl_xcomp_configure_flags - Extra configure flags.
+##    Extra flags to pass to the `configure' script.
+#erl_xcomp_configure_flags=
+
+### ---- Cross compiler and other tools to use --------------------------------
+
+### If the cross compilation tools are prefixed by `<HOST>-' you probably do
+### not need to set these variables (where `<HOST>' is what has been passed as
+### `--host=<HOST>' argument to `configure').
+
+## CC - C compiler.
+CC=x86_64-saf-gcc
+
+## CFLAGS - C compiler flags.
+#CFLAGS=
+
+## STATIC_CFLAGS - Static C compiler flags.
+#STATIC_CFLAGS=
+
+## CFLAG_RUNTIME_LIBRARY_PATH - C compiler runtime library path flag.
+##    This flag should set a specific runtime library path for the shared
+##    library at link time. Note that this is actually a linker flag, but it
+##    needs to be passed via the compiler.
+#CFLAG_RUNTIME_LIBRARY_PATH=
+
+## CPP - C pre-processor.
+#CPP=
+
+## CPPFLAGS - C pre-processor flags.
+#CPPFLAGS=
+
+## CXX - C++ compiler.
+CXX=x86_64-saf-g++
+
+## CXXFLAGS - C++ compiler flags.
+#CXXFLAGS=
+
+## LD - Linker
+LD=x86_64-saf-ld
+
+## LDFLAGS - Linker flags.
+#LDFLAGS=
+
+### -- Dynamic Erlang Driver linker flags. --
+
+### NOTE! Either define all or non of the DED_LD* variables.
+
+## DED_LD - Linker.
+#DED_LD=
+
+## DED_LDFLAGS - Linker flags.
+#DED_LDFLAGS=
+
+## DED_LD_FLAG_RUNTIME_LIBRARY_PATH - Linker runtime library path flag.
+##    This flag should set a specific runtime library path for the shared
+##    library at link time.
+#DED_LD_FLAG_RUNTIME_LIBRARY_PATH=
+
+### -- Other tools --
+
+## RANLIB - ranlib
+RANLIB=x86_64-saf-ranlib
+
+## AR - ar
+AR=x86_64-saf-ar
+
+### ---- Cross System Root Locations ------------------------------------------
+
+## erl_xcomp_sysroot - Absolute cross system root path.
+##    The absolute path to the system root of the cross compilation
+##    environment. Currently, the `crypto', `odbc', `ssh' and `ssl'
+##    applications need the system root. These applications will be skipped
+##    if the system root has not been set. The system root might be needed
+##    for other things too. If this is the case and the system root has not
+##    been set, `configure' will fail and request you to set it.
+erl_xcomp_sysroot="$SAF_SYSROOT_X86_64"
+
+## erl_xcomp_isysroot - Absolute cross include system root path.
+##    The absolute path to the system root for includes of the cross
+##    compilation environment. If not set, this value defaults to
+##    `$erl_xcomp_sysroot', i.e., only set this value if the include system
+##    root path is not the same as the system root path.
+#erl_xcomp_isysroot=
+
+### ---- Optional feature, or bug tests ---------------------------------------
+
+### These tests cannot (always) be done automatically when cross compiling. You
+### usually does not need to set these variables. Only set these if you really
+### know what you are doing.
+
+### The `configure' script will issue a warning when a default value is used.
+### When a variable has been set, no warning will be issued.
+
+## erl_xcomp_bigendian - yes|no
+##    If `yes', the target system must be big endian. If `no', little endian.
+##    This can often be automatically detected, but not always. If not
+##    automatically detected, `configure' will fail unless this variable is
+##    set. No default value is used, i.e., `configure' will try to figure
+##    this out automatically.
+#erl_xcomp_bigendian=
+
+## erl_xcomp_linux_clock_gettime_correction - yes|no (defaults to `yes' on
+##                                                    Linux; otherwise, `no')
+##    If `yes', `clock_gettime(CLOCK_MONOTONIC, _)' on the target system must
+##    work. This variable is recommended to be set to `no' on Linux systems
+##    with kernel versions less than 2.6.
+#erl_xcomp_linux_clock_gettime_correction=
+
+## erl_xcomp_linux_nptl - yes|no (defaults to `yes' on Linux; otherwise, `no')
+##    If `yes', the target system must have NPTL (Native POSIX Thread Library).
+##    Older Linux systems have LinuxThreads instead of NPTL (Linux kernel
+##    versions typically less than 2.6).
+#erl_xcomp_linux_nptl=
+
+## erl_xcomp_linux_usable_sigusrx - yes|no (defaults to `yes')
+##    If `yes', the `SIGUSR1' and `SIGUSR2' signals must be usable by the ERTS.
+##    Old LinuxThreads thread libraries (Linux kernel versions less than 2.2)
+##    used these signals and made them unusable by the ERTS.
+#erl_xcomp_linux_usable_sigusrx=
+
+## erl_xcomp_linux_usable_sigaltstack - yes|no (defaults to `yes' on Linux;
+##                                              otherwise, `no')
+##    If `yes', `sigaltstack()' must be usable on the target system.
+##    `sigaltstack()' on Linux kernel versions less than 2.4 are broken.
+#erl_xcomp_linux_usable_sigaltstack=
+
+## erl_xcomp_poll - yes|no (defaults to `no' on Darwin/MacOSX; otherwise, `yes')
+##    If `yes', the target system must have a working `poll()' implementation
+##    that also can handle devices. If `no', `select()' will be used instead of
+##    `poll()'.
+#erl_xcomp_poll=
+
+## erl_xcomp_kqueue - yes|no (defaults to `no')
+##    If `yes', the target system must have a working `kqueue()' implementation
+##    that returns a file descriptor which can be used by `poll()' and/or
+##    `select()'. If `no' and the target system has not got `epoll()' or
+##    `/dev/poll', the kernel-poll feature will be disabled.
+#erl_xcomp_kqueue=
+
+## erl_xcomp_putenv_copy - yes|no (defaults to `no')
+##    If `yes', the target system must have a `putenv()' implementation that
+##    stores a copy of the key/value pair.
+#erl_xcomp_putenv_copy=
+
+## erl_xcomp_reliable_fpe - yes|no (defaults to `no')
+##    If `yes', the target system must have reliable floating point exceptions.
+#erl_xcomp_reliable_fpe=
+
+## erl_xcomp_getaddrinfo - yes|no (defaults to `no')
+##    If `yes', the target system must have a working `getaddrinfo()'
+##    implementation that can handle both IPv4 and IPv6.
+erl_xcomp_getaddrinfo=yes
+
+## erl_xcomp_gethrvtime_procfs_ioctl - yes|no (defaults to `no')
+##    If `yes', the target system must have a working `gethrvtime()'
+##    implementation and is used with procfs `ioctl()'.
+#erl_xcomp_gethrvtime_procfs_ioctl=
+
+## erl_xcomp_clock_gettime_cpu_time - yes|no (defaults to `no')
+##    If `yes', the target system must have a working `clock_gettime()'
+##    implementation that can be used for retrieving process CPU time.
+#erl_xcomp_clock_gettime_cpu_time=
+
+## erl_xcomp_after_morecore_hook - yes|no (defaults to `no')
+##    If `yes', the target system must have a working `__after_morecore_hook'
+##    that can be used for tracking used `malloc()' implementations core memory
+##    usage.
+erl_xcomp_after_morecore_hook=yes
+
+## erl_xcomp_dlsym_brk_wrappers - yes|no (defaults to `no')
+##    If `yes', the target system must have a working `dlsym(RTLD_NEXT, <S>)'
+##    implementation that can be used on `brk' and `sbrk' symbols used by the
+##    `malloc()' implementation in use, and by this track the `malloc()'
+##    implementations core memory usage.
+#erl_xcomp_dlsym_brk_wrappers=
+
+#### --------------------------------------------------------------------------