| Age | Commit message (Collapse) | Author |
|---|
|
OTP-9794
Test cases are added for the following functions:
* reltool_server:get_sys
* reltool_server:set_sys
* reltool_server:get_status
* reltool_server:gen_rel_files
* reltool:eval_target_spec
* reltool:get_server
|
|
OTP-9794
This test case revealed a bug that occurs when calling
reltool_server:get_mod after reltool_server:undo_config. get_mod reads
from the module table (ets) and not from the reltool_server state,
while undo_config only changes the state. This bug has been corrected,
so undo_config now updates both state and tables (it does the same as
set_sys).
|
|
OTP-9794
Some test cases in reltool_server_SUITE tried to create a target
system and then start a node running this system. If creation of the
target system failed, an attempt would still be made to start the
node. This has been corrected so the test is immediately terminated if
the target system could not be created.
|
|
OTP-9794
This is a test of the mechanism with which reltool_server decides
which applications to include and not, based on function calls between
applications. This is also the mechanism which forms the base for the
application- and module dependency graphs.
|
|
OTP-9794
The following test cases are added for the inteface from GUI to
reltool_server:
* get_config
* get_apps
* set_app_and_undo
* set_apps_and_undo
* load_config_and_undo
* reset_config_and_undo
* save_config
The following bugs were found and corrected:
* If set_apps failed, then the state of reltool_server would not
be reset to how it was before the failing operation - and every
operation done afterwards would also (seem to) fail.
* undo_config did not work after reset_config - since faulty #sys
record was stored as old_sys.
* undo_config did not work after set_app (used when changing the
content of an application from the GUI) - since old_sys was not
set. Also old_status was not set causing possible warnings to
disappear.
* undo_config did not work after set_apps (used e.g. when
excluding or including an application from the GUI) - since
old_sys was not set. Also old_status was not set causing
possible warnings to disappear.
|
|
* rj/fix-supervisor-shutdown-doc:
Fix small typo in kernel app doc
Cosmetic: split very long lines from supervisor doc
Fix supervisor doc: Shutdown, MaxR and MaxT type specs
Add the type restrictions in the code comments
Remove trailing spaces
OTP-9987
|
|
* rj/fix-misc-doc-typos:
Fix a code snippet and two typos in the doc
|
|
* rj/minor-doc-improvements:
Remove dashes from error_logger doc
Add start/0,1 and help/0 to etop's doc
Remove/add extra/missing white spaces
|
|
* rj/fix-global-spec:
Improve global:re_register_name/2,3 spec
Fix global:{random_exit_name,random_notify_name}/3 spec
|
|
* origin/peppe/common_test/otp-9666:
Set correct group leader for end_per_testcase process after tc timeout
OTP-9666
|
|
* origin/peppe/common_test/otp-9634_9659:
Change the option name 'unique_priv_dir' to 'create_priv_dir'
Add test suite for the unique_priv_dir feature
Make it possible to use unique priv_dir names
Create entry for every repeated test in index.html
OTP-9634
OTP-9659
|
|
* rickard/barriers/OTP-9922:
Remove newly introduced excessive barrier in erts_thr_progress_later()
Fix implementation with ddrb barriers
|
|
Ensure that -on_load functions are not reported as unused
Unknown types are being reported by dialyzer's GUIs
Fix bug in remote type solving
Review by Kostis Sagonas and fixes
Simplify external vs bad calls check
Remove callgraph from the state used during solving
Refactorings in dialyzer_typesig
Avoid unnecessary passing of huge terms in some closures
Further simplifications
Remove redundant code
Simplify dialyzer_succ_typings code
Cleanups in dialyzer_callgraph and dialyzer_dataflow
Zero-arity unused functions Dialyzer patch
Cleanup debug messages in dialyzer_dataflow
Refactorings in dialyzer_analysis_callgraph
Allow t_opaque_structure to handle multiple opaque types
Support alternative spelling of behaviour
Refactor function selection by Dialyzer's codeserver
Prettify spec
Small fixes for Dialyzer's testsuites generation
|
|
|
|
|
|
|
|
|
|
* bjorn/compiler/coverage-and-minor-fixes/OTP-9982:
v3_life: Use common code for guards and bodies
v3_core: Don't put negative line numbers in annotations
v3_kernel: Dig out the line number only when generating a warning
v3_kernel: Clean up handling of guards
v3_kernel: Introduce is_in_guard/1
v3_kernel: Removed unreached clause for #k_bin_int{} in sub_size_var/1
v3_kernel: Remove unreached handling of #k_bin_int{} in arg_con/1
v3_codegen: Eliminate the special case of 'put' without destination
v3_kernel: Don't attempt to share identical literals
v3_kernel: Handle sequences in guards
v3_kernel: Remove clauses that are never executed in arg_val/1
v3_kernel.hrl: Remove unused record #k_string{}
v3_kernel.erl: Remove unused define of EXPENSIVE_BINARY_LIMIT
sys_core_fold: Refactor previous_ctx_to_binary/2 to cover it completely
sys_core_fold: Fix opt_guard_try/1
sys_core_fold: Simplify opt_bool_not() to cover it completely
sys_core_fold: Remove duplicate optimization
|
|
* origin/peppe/common_test/otp-9899:
Fix broken repeat functionality
OTP-9899
|
|
* origin/peppe/common_test/otp-9898:
Create link to ct_run in the installation bin dir
OTP-9898
|
|
* origin/peppe/common_test/otp-9964_9975_9595:
Have ct_run clean up the code path after each test run
Fix problems with ct_run's code path manipulation
OTP-9964
OTP-9975
OTP-9595
|
|
|
|
In Core Erlang and later passes, compiler-generated code can be
indicated in two different ways: by negative line numbers and by
a 'compiler_generated' annotation.
Simplify the code and improve coverage by turning negative line
numbers positive and adding a 'compiler_generated' annotation in
the v3_core pass. That means that Core Erlang and latter passes
do not have deal with negative line numbers.
|
|
|
|
Handling of guards become a mess when andalso/orelse in guards
were introduced. Clean it up by using common code for most
constructs, regardless of where they occur, and when needed use
is_in_guard/1 to handle guard constructs differently.
|
|
Also make sure that warnings about failure or timeout of end_per_testcase
(after a test case timeout) get printed in the test case log file.
OTP-9666
|
|
The new values for create_priv_dir are:
auto_per_run, auto_per_tc, manual_per_tc
|
|
|
|
Introduce the optional feature to have Test Server generate
priv_dir directory names that are unique for each test case
or config function. The name of the option/flag is
'unique_priv_dir' and it can be set to value 'auto' or
'manual'. If auto, Test Server creates each priv_dir
automatically (can be expensive in case of many and/or repeated
cases). If manual, the user needs to create the priv_dir
explicitly by calling ct:make_priv_dir/0.
|
|
For each repeated test during a test run, an entry is created
in the index.html file (i.e. the overview file for the test run).
In the top level (logdir) index file, only the last test result is
listed.
E.g, given the test spec:
[{merge_tests,false},{dirs,testobj1},{dirs,testobj1}]
In the index file for the test run (under Logdir/ct_run.Node.Date.Time),
both dir tests are listed. In the top level index file (under Logdir),
only the last test is listed (one has to find all results through the
all_runs.html file).
|
|
* sverk/cpu-topology-crash:
erts: Fix crash on Linux if /sys/devices/system/node is not readable
OTP-9978
|
|
* origin/peppe/common_test/otp-9730:
Add column for group name in suite overview log file
OTP-9730
|
|
* origin/peppe/common_test/otp-9904_9900:
Introduce error notification printout in the tc log
OTP-9904
OTP-9900
|
|
* origin/peppe/common_test/otp-9830:
Fix problem with buffered DOWN messages
OTP-9830
|
|
* origin/peppe/common_test/otp-9958:
Fix problem with dropped suite- and test case names
OTP-9958
|
|
OTP-9899
|
|
OTP-9898
|
|
OTP-9595
|
|
OTP-9964
OTP-9975
|
|
OTP-9730
|
|
|
|
|
|
Also fix problem with parallel test cases printing "into each other"
(when using ct:print or ct:pal).
OTP-9904
OTP-9900
|
|
* egil/redocument-scheduler_wall_time/OTP-9858:
doc: Enhance wording and remove typos
doc: Move examples and notes into tag-lists
doc: Rewording of scheduler_wall_time
doc: Change variable name to 'A' to reflect Active
doc: Rewording of scheduler busy
Update scheduler_wall_time documentation
|
|
* lukas/system/ssh_undef_function:
Add filter for ssh undefined function calls
|
|
maint
* lukas/test_server/ts_skip_unknown_applications/OTP-9971:
Ignore non-app suites when checking suites to skip
Create special spec file when application is missing
|
|
Fallback on using /sys/devices/system/cpu to get cpu topology,
as is already done when node directory doesn't exist.
|
|
|
|
When an application cannot be found by ts, a special skip
testspec is created which skips all tests in that application.
|
|
* lukas/erl_docgen/fix_range_type/OTP-9970:
Add so that <img> tags will be transformed to <image>
Allow 1..2 types to be exported from edoc
|
