aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2012-11-08Merge branch 'maint'Anders Svensson
2012-11-08Merge branch 'anders/diameter/upgrade/OTP-10550' into maintAnders Svensson
* anders/diameter/upgrade/OTP-10550: Allow for no diameter on remote node in connection guard
2012-11-08Merge branch 'anders/diameter/peer_mapping/OTP-10470' into maintAnders Svensson
* anders/diameter/peer_mapping/OTP-10470: Document peer_ref() service_info Use peer_ref() service_info in traffic suite Add service_info for a peer_ref()
2012-11-08Merge branch 'anders/diameter/shared_transport/OTP-10443' into maintAnders Svensson
* anders/diameter/shared_transport/OTP-10443: Use multiple connections in traffic suite Implement service_opt() restrict_connections Document service_opt() restrict_connections
2012-11-08Merge branch 'anders/diameter/sequence_masks/OTP-10445' into maintAnders Svensson
* anders/diameter/sequence_masks/OTP-10445: Redo watchdog test suite Update/clarify some comments Add reopen message from watchdog Add options service_info Add diameter_reg:wait/1 Clarify diameter_transport doc Remove pre-OTP configure support Remove obsolete make target Use sequence masks in test suites Implement sequence masks Document sequence masks
2012-11-08Merge branch 'bjorn/stdlib/eliminate-param-module-use'Björn Gustavsson
* bjorn/stdlib/eliminate-param-module-use: dict_SUITE: Eliminate use of parameterized modules sets_SUITE: Eliminate use of parameterized modules
2012-11-08dict_SUITE: Eliminate use of parameterized modulesBjörn Gustavsson
Since the support for parameterized modules will be removed in R16, we should not use them in test cases.
2012-11-08sets_SUITE: Eliminate use of parameterized modulesBjörn Gustavsson
Since the support for parameterized modules will be removed in R16, we should not use them in test cases.
2012-11-07Merge branch 'siri/user_timetrap-group-test/OTP-10018'Siri Hansen
* siri/user_timetrap-group-test/OTP-10018: [common_test] Add tests for user timetraps in groups [test_server] Skip test cases if init_per_group fails in user timetrap [test_server] Add Config to run_test_case_msgloop/1 from the start
2012-11-07[common_test] Add tests for user timetraps in groupsSiri Hansen
2012-11-07[test_server] Skip test cases if init_per_group fails in user timetrapSiri Hansen
'user_timetrap_error' was not detected during any "conf init function" except init_per_suite, so if e.g. init_per_group failed with user_timetrap_error, then the test cases in the group would not be skipped. This has been corrected.
2012-11-07[test_server] Add Config to run_test_case_msgloop/1 from the startSiri Hansen
Earlier, #st.config was set to undefined when entering this loop. Then it was updated when the test case itself started. This means that if the test case process crashed during test case initiation, the parent process would not know the Config. This commit saves the initial Config value in the parent process (run_test_case_msgloop/1) from the start.
2012-11-07compiler tests: Correct error in receive_SUITE:groups/0Björn Gustavsson
Commit c4375a62cfaabfd8de757f59714623ba1a8cb915 added a parallel group, but incorrectly, so no test cases at all were run in receive_SUITE.
2012-11-05Merge branch 'maint'Fredrik Gustafsson
2012-11-05Merge branch 'fredrik/ssh-use-options-alg/OTP-10498' into maintFredrik Gustafsson
* fredrik/ssh-use-options-alg/OTP-10498: Option to ssh:connect {pref_public_key_algs, list()} where you can give the algorithms you want to use
2012-11-05Allow for no diameter on remote node in connection guardAnders Svensson
The guard is against a connection to a given peer already existing but fails if diameter is not running on a remote node. Note that the guard itself is to be made configurable in R15B03 (OTP-10493) to allow multiple connections per peer.
2012-11-05Document peer_ref() service_infoAnders Svensson
2012-11-05Use peer_ref() service_info in traffic suiteAnders Svensson
2012-11-05Add service_info for a peer_ref()Anders Svensson
This allows a diameter_app callback to retrieve the corresponding configuration as passed to diameter:add_transport/2.
2012-11-05Use multiple connections in traffic suiteAnders Svensson
2012-11-05Implement service_opt() restrict_connectionsAnders Svensson
2012-11-05Document service_opt() restrict_connectionsAnders Svensson
Configuration will allow relaxation of the guard against multiple transport connections to the same peer.
2012-11-05Redo watchdog test suiteAnders Svensson
It was broken by sequence masks and can be simplified using (the new-ish) watchdog events.
2012-11-05Update/clarify some commentsAnders Svensson
2012-11-05Add reopen message from watchdogAnders Svensson
This makes capabilities available to service_info as soon as capabilities exchange has been completed. In particular, before state OKAY is reached.
2012-11-05Add options service_infoAnders Svensson
To retrieve service_opt() values. Don't document it yet.
2012-11-05Add diameter_reg:wait/1Anders Svensson
Mostly to use it in the watchdog test suite that's been broken by sequence masks. Do a bit of cleanup while we're at it.
2012-11-05Clarify diameter_transport docAnders Svensson
2012-11-05Remove pre-OTP configure supportAnders Svensson
It's neither used nor maintained.
2012-11-05Remove obsolete make targetAnders Svensson
There are plt/dialyze targets in src/Makefile.
2012-11-05Use sequence masks in test suitesAnders Svensson
2012-11-05Implement sequence masksAnders Svensson
Code should be loaded in this order: diameter_session (sequence/1) diameter_peer_fsm (calls to sequence/1) diameter_service (sequence config, mask in receive_message/3) diameter_watchdog (mask in peer start and receive_message/3) diameter_config (accept sequence config) Order of diameter and diameter_peer doesn't matter.
2012-11-05Document sequence masksAnders Svensson
Allow 32-bit Hop-by-Hop and End-to-End identifiers to be modified by replacing the topmost bits with a constant value. This allow services on different nodes to generate globally unique identifiers by having each node mask in its own constant.
2012-11-05Merge branch 'maint'Anders Svensson
2012-11-05Merge branch 'anders/diameter/service_info/OTP-10460' into maintAnders Svensson
* anders/diameter/service_info/OTP-10460: Don't call service process for service_info
2012-11-05Merge branch 'anders/diameter/failover_error/OTP-10461' into maintAnders Svensson
* anders/diameter/failover_error/OTP-10461: Add missing clause for peer failover
2012-11-05Merge branch 'anders/diameter/event_timing/OTP-10459' into maintAnders Svensson
* anders/diameter/event_timing/OTP-10459: Send up event *after* inserting peer in table
2012-11-05Merge branch 'anders/diameter/watchdog_timeout/OTP-10444' into maintAnders Svensson
* anders/diameter/watchdog_timeout/OTP-10444: Exit peer_fsm with {shutdown, watchdog_timeout}, not shutdown
2012-11-05Merge branch 'anders/diameter/packet_callback/OTP-10441' into maintAnders Svensson
* anders/diameter/packet_callback/OTP-10441: Use packet callbacks in traffic suite Improve other diameter_app doc Document eval_packet Add eval_packet for examining outgoing messages after encode
2012-11-05Merge branch 'anders/diameter/capabilities_errors/OTP-10440' into maintAnders Svensson
* anders/diameter/capabilities_errors/OTP-10440: Fix matching in case of erroneous capabilities config Fix handling of Origin-State-Id config
2012-11-02Merge branch 'maint'Lukas Larsson
* maint: Skip ct_netconf tests if there is no crypto Migrate timers from test_server to ct interface Update tests to run with an oldshell emulator Move crypto check so that tc is skipped and not failed Update for new version of ppc compilation chain Verify that ebin folder of applications exists Conflicts: lib/asn1/test/asn1_SUITE.erl lib/kernel/test/interactive_shell_SUITE.erl
2012-11-02Merge branch 'lukas/rcs-ppc-cross-tests/OTP-10265' into maintLukas Larsson
* lukas/rcs-ppc-cross-tests/OTP-10265: Skip ct_netconf tests if there is no crypto Migrate timers from test_server to ct interface Update tests to run with an oldshell emulator Move crypto check so that tc is skipped and not failed Update for new version of ppc compilation chain Verify that ebin folder of applications exists
2012-11-02Merge branch 'lukas/kernel/solaris_sendfile_fix/OTP-10549'Lukas Larsson
* lukas/kernel/solaris_sendfile_fix/OTP-10549: Fix oracle solaris bug in sendfile
2012-11-02Fix oracle solaris bug in sendfileLukas Larsson
When using values of sfv_len and sfv_off which are larger than the file in question, sendfilev can sometimes return -1 and send data. It seems to be only Oracle SunOS which this happens on.
2012-11-02Option to ssh:connect {pref_public_key_algs, list()} where you can give the ↵Fredrik Gustafsson
algorithms you want to use
2012-11-02Merge branch 'raimo/IPV6_V6ONLY/OTP-8928'Raimo Niskanen
* raimo/IPV6_V6ONLY/OTP-8928: kernel: Correct documentation typos discovered by Tuncer Ayaz
2012-11-02kernel: Correct documentation typos discovered by Tuncer AyazRaimo Niskanen
2012-10-31Merge branch 'siri/cover-tests'Siri Hansen
* siri/cover-tests: (21 commits) [common_test] Extend timer for flushing error logger [cover] Allow reconnection if node has been disconnected or down [cover] Don't kill remote nodes when connection to main node is lost [test_server] Add option {start_cover,false} to test_server:start_node Use code:lib_dir instead of code:which to get application directory [common_test] Add test for OTP-9956 Include all kernel modules in code coverage analysis [common_test] Add test suite for code coverage support [common_test, test_server] Don't flush cover if cover is not running [common_test] Add option cover_stop [test_server] Allow cross cover analysis when testing through common_test [test_server] Start cover in test_server:wait_for_node [test_server] Multiply timers with timetrap_scale_factor when starting nodes Include all stdlib modules in code coverage analysis [test_server] Include all test_server modules in code coverage analysis Skip epp_SUITE:otp_8911 if cover is running [common_test] Start cover on slave nodes if running cover tests [common_test] Don't stop cover before stopping slave node [test_server] Don't stop cover after test is finished [cover] Add support for test_server ... OTP-10427
2012-10-31Merge branch 'bjorn/ct/stability/OTP-10480'Björn Gustavsson
* bjorn/ct/stability/OTP-10480: Simplify managment of test_server_loc Keep the information about the current test case consistent test_server: Eliminate the Loc argument for do_end_tc_call() Refactor the handling of the make_priv_dir message test_server: Refactor run_test_case_msgloop()
2012-10-31Fix writing of configuration information to ct_master_log.htmlBjörn Gustavsson
Because of a forgotten "Fd", configuration information intended for ct_master_log.html ended up being written to standard output.
generated by cgit v1.2.3 (git 2.25.1) at 2025-02-23 11:10:57 +0000