aboutsummaryrefslogtreecommitdiffstats
AgeCommit message (Collapse)Author
2012-12-20[common_test] Stop cover on slave node after node is terminatedSiri Hansen
Before terminating slave nodes, common_test calls cover:flush/1 to fetch data from the node without actually stopping cover on this node. If cover is not stopped for the node and a new node with the same name is started, then cover will be started on the new node. To avoid this common_test now calls cover:stop/1 after the slave node is terminated.
2012-12-20[test_server] Stop cover on node after node is terminatedSiri Hansen
Before terminating slave nodes, test_server calls cover:flush/1 to fetch data from the node without actually stopping cover on this node. If cover is not stopped for the node and a new node with the same name is started, then cover will be started on the new node. To avoid this test_server now calls cover:stop/1 after the slave node is terminated.
2012-12-19[cover] Fix timing dependent bug in cover_SUITE:reconnectSiri Hansen
Adding a timer:sleep between these two lines: net_kernel:disconnect(N1), [] = cover:which_nodes(), This is to make sure the disconnect is detected by cover before checking that the node is gone.
2012-12-19[cover] Remove stopped node also from lost_nodes listSiri Hansen
A nodes that was stopped with cover:stop/1 while marked as lost would not be removed from the list of lost nodes. Therefore, if a nodeup was later received for a node with the same name, it would be reconnected. This has been corrected.
2012-12-19[cover] Don't mark stopped node as lostSiri Hansen
Nodes that were stopped with cover:stop/1 were marked as lost and would be reconnected if a nodeup was later received for a node with the same name. This has been corrected.
2012-12-18Merge branch 'rickard/r16/port-optimizations/OTP-10336'Rickard Green
* rickard/r16/port-optimizations/OTP-10336: Fix driver_monitor_process() ASSERT Fix scheduled port link operation Fix aborts of port tasks when terminating ports
2012-12-18Merge branch 'maint'Siri Hansen
Conflicts: lib/common_test/test/Makefile
2012-12-17Merge branch 'maint-r15' into maintSiri Hansen
2012-12-17Update preloaded modulesBjörn-Egil Dahlberg
2012-12-17Merge branch 'egil/r16/insert_delete_element/OTP-10643'Björn-Egil Dahlberg
* egil/r16/insert_delete_element/OTP-10643: Update preloaded erlang.beam erts: Document insert_element and delete_element tests: Update tuple_SUITE for insert and delete Add insert_element/3 and delete_element/2
2012-12-17Fix driver_monitor_process() ASSERTRickard Green
2012-12-14Update preloaded erlang.beamBjörn-Egil Dahlberg
2012-12-14erts: Document insert_element and delete_elementBjörn-Egil Dahlberg
Document new BIFs: * erlang:insert_element/3 * erlang:delete_element/2
2012-12-14tests: Update tuple_SUITE for insert and deleteBjörn-Egil Dahlberg
* Test erlang:insert_element/3 BIF * Test erlang:delete_element/2 BIF
2012-12-14Add insert_element/3 and delete_element/2Björn-Egil Dahlberg
* erlang:insert_element/3 - extend a tuple at an index * erlang:delete_element/2 - remove an element at an index
2012-12-14Merge branch 'sverk/egil/r16/new-alloc-header-scheme/OTP-10273'Björn-Egil Dahlberg
OTP-10415 * sverk/egil/r16/new-alloc-header-scheme/OTP-10273: (42 commits) erts: Make ll main mbc fit into 2pow size erts: Clear entire mseg cache upon request erts: Reduce max heap sizes tests: Refactor away ?line macro in beam_SUITE tests: Fix heap_sizes check tests: Refactor away ?line macro in process_SUITE tests: Use new correct min_bin_vheap_size in test erts: Set super alignment (256kb) and limits for sbct (8Mb) and lmbcs (128Mb) erts: Do not cache segments that are misaligned erts: Add mseg cache for large sbc segments erts: Reintroduce mseg options amcbf and rmcbf erts: Optimize erl_alloc_util.c by substitute MBC_BLK_SZ erts: Fix bug when allocating size near sbc_threshold erts: Make gc sizes fit into MB Carrier blocks erts: Force sbmbc to be disabled in a crude way erts: Fix new header scheme for win64 erts: Fix mseg cache. Malplaced NULL pointer erts: Remove unused mseg options amcbf and rmcbf erts: Use aligned bits as constant in mseg_alloc erts: Don't let zero be considered a power of two ... Conflicts: erts/emulator/test/process_SUITE.erl
2012-12-14erts: Make ll main mbc fit into 2pow sizeBjörn-Egil Dahlberg
2012-12-14erts: Clear entire mseg cache upon requestBjörn-Egil Dahlberg
2012-12-14erts: Reduce max heap sizesBjörn-Egil Dahlberg
Reduces max heap sizes to max addressable memory space. In reality this could be even less since we need at least twice as much adressable memory to do a garbage collection. The rest of the system also uses memory thus further constraining heap memory space and in the 64 bit case we really only have 48 bits mappable memory.
2012-12-14tests: Refactor away ?line macro in beam_SUITEBjörn-Egil Dahlberg
2012-12-14tests: Fix heap_sizes checkBjörn-Egil Dahlberg
2012-12-14tests: Refactor away ?line macro in process_SUITEBjörn-Egil Dahlberg
2012-12-14tests: Use new correct min_bin_vheap_size in testBjörn-Egil Dahlberg
2012-12-14erts: Set super alignment (256kb) and limits for sbct (8Mb) and lmbcs (128Mb)Sverker Eriksson
2012-12-14erts: Do not cache segments that are misalignedBjörn-Egil Dahlberg
* SBC may realloc carriers to misaligned addresses which is perfectly fine. However, those segments may not be cached because MBC allocations might find them and MBC's *needs* correct alignment.
2012-12-14erts: Add mseg cache for large sbc segmentsBjörn-Egil Dahlberg
* Not a power of two (unpowered) segements
2012-12-14erts: Reintroduce mseg options amcbf and rmcbfBjörn-Egil Dahlberg
Used with new sbc cache
2012-12-14erts: Optimize erl_alloc_util.c by substitute MBC_BLK_SZSverker Eriksson
with either MBC_ABLK_SZ or MBC_FBLK_SZ in all cases when we already know what kind of block it is.
2012-12-14erts: Fix bug when allocating size near sbc_thresholdSverker Eriksson
A block larger than sbc_threshold can be allocated in MBC if the subsequent "residue block" is smaller than min_block_size. Solved by lowering sbc_threshold to ("hard limit" - min_block_size).
2012-12-14erts: Make gc sizes fit into MB Carrier blocksBjörn-Egil Dahlberg
* Account for block header size in gc-sizes * Also slow down growth to 20% instead of 25% when size threshold is reached
2012-12-14erts: Force sbmbc to be disabled in a crude waySverker Eriksson
2012-12-14erts: Fix new header scheme for win64Sverker Eriksson
2012-12-14erts: Fix mseg cache. Malplaced NULL pointerBjörn-Egil Dahlberg
2012-12-14erts: Remove unused mseg options amcbf and rmcbfBjörn-Egil Dahlberg
2012-12-14erts: Use aligned bits as constant in mseg_allocBjörn-Egil Dahlberg
HAVE_SUPER_ALIGNED_MB_CARRIERS is always true with mmap and thus aligned bits is a constant and so is "page" size for mmap. Conflicts: erts/emulator/sys/common/erl_mseg.h
2012-12-14Fix scheduled port link operationRickard Green
2012-12-14Fix aborts of port tasks when terminating portsRickard Green
2012-12-14Merge branch 'ia/ssh/add_users_guide/OTP-7786'Ingela Anderton Andin
* ia/ssh/add_users_guide/OTP-7786: ssh: Document and clean up SSH behaviours ssh: Add Users Guide and enhance man pages ssh: Added User's Guide framework and minor enhancements
2012-12-13ssh: Document and clean up SSH behavioursIngela Anderton Andin
2012-12-13Merge branch 'ao/fix_mnesia_overload_msg_format'Henrik Nord
* ao/fix_mnesia_overload_msg_format: Fix format of mnesia overload message OTP-10639
2012-12-13Merge branch 'tja/exported-function-face'Henrik Nord
* tja/exported-function-face: Add separate face for exported functions OTP-10637
2012-12-13Merge branch 'jwh/mnesia_interval_removal'Henrik Nord
* jwh/mnesia_interval_removal: mnesia: Use chained send_after instead of send_interval OTP-10636
2012-12-13Merge branch 'pgö/tv-refresh-crash'Henrik Nord
* pgö/tv-refresh-crash: Fix Table Viewer refresh crash on no more existing ets tables OTP-10635
2012-12-13ssh: Add Users Guide and enhance man pagesIngela Anderton Andin
2012-12-13ssh: Added User's Guide framework and minor enhancementsNiclas Eklund
2012-12-12Merge branch 'anders/diameter/tbit/OTP-10619'Anders Svensson
* anders/diameter/tbit/OTP-10619: Add discard testcases to failover suite Check for T flag in failover suite Fix setting of T flag at failover
2012-12-12Prepare releaseErlang/OTP
2012-12-12Merge branch 'siri/common_test/surefire-for-nci/OTP-10589' into maint-r15Erlang/OTP
* siri/common_test/surefire-for-nci/OTP-10589: [common_test] Add documentation of new url_base option to cth_surefire [common_test] Fix cth_surefire
2012-12-12[common_test] Add documentation of new url_base option to cth_surefireSiri Hansen
2012-12-12[common_test] Fix cth_surefireSiri Hansen
The following corrections/changes are done in the cth_surefire hook: * Earlier there would always be a 'properties' element under the 'testsuites' element. This would exist even if there were now 'property' element inside it. This has been changed so if there are no 'property' elements to display, then there will not be a 'properties' element either. * The XML file will now (unless other is specified) be stored in the top log directory. Earlier, the default directory would be the current working directory for the erlang node, which would mostly, but not always, be the top log directory. * The 'hostname' attribute in the 'testsuite' element would earlier never have the correct value. This has been corrected. * The 'errors' attribute in the 'testsuite' element would earlier display the number of failed testcases. This has been changed and will now always have the value 0, while the 'failures' attribute will show the number of failed testcases. * A new attribute 'skipped' is added to the 'testsuite' element. This will display the number of skipped testcases. These would earlier be included in the number of failed test cases. * The total number of tests displayed by the 'tests' attribute in the 'testsuite' element would earlier include init/end_per_suite and init/end_per_group. This is no longer the case. The 'tests' attribute will now only count "real" test cases. * Earlier, auto skipped test cases would have no value in the 'log' attribute. This is now corrected. * A new attributes 'log' is added to the 'testsuite' element. * A new option named 'url_base' is added for this hook. If this option is used, a new attribute named 'url' will be added to the 'testcase' and 'testsuite' elements. Tests are added for the ct_surefire hook.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 03:06:37 +0000