| Age | Commit message (Collapse) | Author |
|---|
|
* epa/observer_state_view/OTP-11136:
observer: corrected tip message
observer: re-indetion of observer_procinfo.erl
Add processes state view in observer
|
|
* bjorn/compiler/fix-compiler-crash/OTP-11119:
compiler: Correct liveness optimization for wait/1
|
|
* anders/diameter/one_failed_avp/OTP-11127:
Adapt CEA/DPA Failed-AVP to RFC 6733
|
|
* anders/diameter/5xxx_failed_avp/OTP-11092:
Fix setting of Failed-AVP on {answer_message, 5xxx} from handle_request
|
|
RFC 6733 says that certain 5xxx result codes must be accompanied by
Failed-AVP, and decode populates #diameter_packet.errors with
Result-Code/AVP pairs for errors it detects. However, Failed-AVP was not
set in the outgoing answer if the handle_request callback returned
{answer_message, 5xxx}. It is now set with the AVP from the first pair
with the specified Result-Code, if found.
Note that {answer_message, 5xxx} doesn't handle all cases in which a
5xxx answer is required, only that in which the setting above is
appropriate. If it isn't then handle_request should construct its answer
and return {reply, Ans}.
|
|
* anders/diameter/host_ip_address/OTP-11045:
Respect Host-IP-Address configuration
|
|
Addresses returned from a transport module were always used to populate
Host-IP-Address AVP's in an outgoing CER/CEA, which precluded the
sending of a VIP address. Transport addresses are now only used if
Host-IP-Address is unspecified.
In other words, respect any configured Host-IP-Address, regardless of
the physical addresses returned by the transport. To use the physical
addresses, don't configure Host-IP-Address.
|
|
* anders/diameter/inband_security/OTP-11050:
Don't send default Inband-Security-Id in CER/CEA
|
|
By setting only one, not many. The handling for other messages (except
DWA, which is forgiving of errors) was dealt with in commit f7ec93e3.
|
|
* nox/fix-bs_put_string-renaming/OTP-11129:
Bootstrap
Fix renaming of bs_put_string instructions
|
|
* lukas/erts/gc_stat_contention/OTP-10271:
Replace gc stat lock with sched spec data
|
|
|
|
|
|
* sla/odbc_in_non_standard_location/OTP-11126:
Fix checking for odbc in standard locations when "with-odbc" flag present.
|
|
* kla/armv6l-for-hipe-fixed/OTP-11125:
add support for hipe on Raspberry Pi (armv6l)
|
|
RFC 6733 recommends against the use of Inband-Security-Id, so only send
a value that differs from the default.
|
|
* rickard/ptab-id-alloc/OTP-11077:
Introduce a better id allocation algorithm for PTabs
|
|
* anders/diameter/watchdog_function_clause/OTP-11115:
Fix watchdog function_clause
|
|
* anders/diameter/missed_5001/OTP-11087:
Remove redundant integer type specifiers from binaries
Fix recognition of 5001 on mandatory AVP's
|
|
* anders/diameter/avp_decode/OTP-11007:
Detect all 5005 (MISSING_AVP) errors and don't reverse errors
Adapt Failed-AVP setting to RFC 6733
Add spec to diameter_codec
Add spec to diameter_gen
Fix recognition of 5014 (INVALID_AVP_LENGTH) errors
Ensure setting Failed-AVP is appropriate
Correct AVP Length error testcases
|
|
* anders/diameter/avp_length_failure/OTP-11026:
Fix decode failure when AVP Length < 8
|
|
* md/httpc-stream-once-fix/OTP-11122:
Remove http_chunk:decode/4 as it is no longer used
Fix {stream, {self, once}} in httpc
|
|
|
|
An AVP setting the M-bit was not regarded as erroneous if it was defined
in the dictionary in question and its container (message or Grouped AVP)
had an 'AVP' field. It's now regarded as a 5001 error (AVP_UNSUPPORTED),
as in the case that the AVP is not defined.
|
|
* bjorn/stdlib/improve-ls/OTP-11108:
Teach c:ls/1 to show non-directory files
|
|
The live optimization in beam_utils:live_opt/4 did not take into
account that the wait/1 instruction *never* falls through to
the next instruction (it has the same effect on the control flow
as the jump/1 instruction).
|
|
* anders/diameter/timetraps/OTP-10914:
Add examples testcase to help identify timetrap failures
Minor traffic suite fix
Add gen_tcp suite
Lighten up on suite timetraps
Add more information to traffic suite timeout failures
|
|
* nox/fix-ignore/OTP-11117:
Properly ignore os_mon and otp_mibs generated includes
|
|
* avi/fix-os-cmd-win/OTP-11104:
Add testcase to exported
Added primary bootstrap for os.beam
kernel: redefined deep_list_command test
Remove unnecessary whitespaces in os.erl and os_SUITE.erl
Fix deep list argument error under Windows in os:cmd/1
|
|
The clause was formerly commented-out because at this point in the code,
no bs_put_string instruction has been generated yet when compiling from
Erlang.
If an Erlang module is compiled to BEAM assembly and the result contains
a bs_put_string instruction, the output can't be compiled to binary
anymore and the compiler crashes with the following error:
$ erlc prs.S
Function: compress/1
prs.S:none: internal error in beam_block;
crash reason: {{case_clause,
{'EXIT',
{function_clause,
[{beam_utils,live_opt,
[[{bs_put_string,1,{string,[0]}},
{bs_init,
{f,0},
{bs_append,0,8,{field_flags,[]}},
0,
[{integer,8},{x,0}],
{x,1}},
{label,2}],
2,
{1,{1,1,nil,nil}},
[{block,
[{'%live',2},
{set,[{x,0}],[{x,1}],move},
{'%live',1}]},
return]],
[{file,"beam_utils.erl"},{line,639}]},
{beam_utils,live_opt,1,
[{file,"beam_utils.erl"},{line,205}]},
{beam_block,function,2,
[{file,"beam_block.erl"},{line,38}]},
{lists,mapfoldl,3,
[{file,"lists.erl"},{line,1329}]},
{beam_block,module,2,
[{file,"beam_block.erl"},{line,29}]},
{compile,'-select_passes/2-anonymous-2-',2,
[{file,"compile.erl"},{line,476}]},
{compile,'-internal_comp/4-anonymous-1-',2,
[{file,"compile.erl"},{line,276}]},
{compile,fold_comp,3,
[{file,"compile.erl"},{line,294}]}]}}},
[{compile,'-select_passes/2-anonymous-2-',2,
[{file,"compile.erl"},{line,476}]},
{compile,'-internal_comp/4-anonymous-1-',2,
[{file,"compile.erl"},{line,276}]},
{compile,fold_comp,3,[{file,"compile.erl"},{line,294}]},
{compile,internal_comp,4,[{file,"compile.erl"},{line,278}]},
{compile,'-do_compile/2-anonymous-0-',2,
[{file,"compile.erl"},{line,152}]}]}
|
|
* ia/ssl/public_key/crypto/elliptic_curve/OTP-11009: (21 commits)
ssl: Do not advertise EC ciphers if crypto support is insufficient
crypto: Ctify tests and test new API
crypto: Allow integer as srp_private arguments according to docs
ssl: Remove unused `srp_parameters` type spec
crypto, public_key & ssl: Make more functions accept integer keys
snmp: Remove use of deprecated crypto functions
crypto,ssh, netconf, inets: binary_to_integer -> bytes_to_integer
netconf: Remove use of deprecated crypto functions
crypto: Documentation fixes from review
crypto: Change argument order of crypto:next_iv/3
crypto,public_key,ssl: Change return value of crypto:generate_key(ecdh,..)
ssl, public_key, crypto: crypto:algorithms/0 -> crypto:supports/0
ssl, public_key & inets: Remove use of deprecated crypto functions from test code
ssl: Remove use of deprecated crypto functions
public_key: Remove use of deprecated crypto functions
dialyzer: Remove use of deprecated crypto functions
ssh & crypto: Remove use of deprecated crypto functions from ssh
Update primary bootstrap
common_test: Replace use of deprecated crypto functions
beam_lib, compile: Replace use of deprecated crypto functions
...
|
|
|
|
To enable hipe on a Raspberry Pi, configure has to detect the ARM processor
correctly. On a Pi, uname detects the CPU as armv6l. Other CPU variants are
already detected with ARCH=arm, so does now the armv6l of the Raspberry Pi.
|
|
Commit 0b7c87dc caused diameter_watchdog:restart/2 to start returning
'stop', so that a watchdog process for a listening transport that
allowed multiple connections to the same peer would die one watchdog
timeout after losing a connection. The new return value was supposed to
be passed up to transition/2, but was instead passed to set_watchdog/1,
resulting in a function_clause error. The resulting crash was harmless
but unseemly.
Not detected by dialyzer.
Thanks to Aleksander Nycz.
|
|
Also fix bugs found by new tests
|
|
* raimo/race-in-prim_inet-close/OTP-10497:
Do not unlink before closing port
|
|
* siri/ct_telnet/no-more-after-timetrap/OTP-10648:
[common_test] Unregister connection if killed
|
|
|
|
As the file 'lib/ssl/src/ssl_srp_primes.hrl' only contains a
specification of a `srp_parameters` type that isn't exported and also
isn't referenced anywhere (neither in the code nor in the
documentation), the type specification (and hence the file as well) can
be removed.
|
|
|
|
|
|
The symptom of this bug was that a (named) telnet connection which was
open and hanging during a timetrap timeout could no longer be opened
again in subsequent test cases.
Since the connection was hanging, ct_telnet:close/1 which was called
during end_per_testcase would fail (timeout) and cause common_test to
brutally kill the connection. The bug was that the connection was not
unregistered at this point. When trying to open the connection again
in the next testcase, common_test attempted to reuse the same
connection since it had not been unregistered. This failed since the
connection in fact was dead.
|
|
* nox/fix-silent-rules/OTP-11111:
Fix some Makefile rules that didn't support silent rules
|
|
|
|
|
|
In an email to erlang-questions, Bengt Kleberg wrote:
When I use c:ls/1 it reminds me so much of Unix "ls" that I
expect c:ls("filename") to work. The resulting error surprises
me every time (not the same day).
While teaching c:ls/1 to show non-directory files, update the
error handling to make use of the POSIX error codes from
file:list_dir/1 and file:format_error/1 (which had not been
invented when the c module was first implemented).
Suggested-by: Bengt Kleberg
Test-suite-by: Bengt Kleberg
|
|
* sverk/win64-fixes:
erts: Change some more 'long' to pointer sized int (ErlDrvUInt)
erts: Fix crash in nif_SUITE for win64
erts: Fix assert in isdigit for negative characters
|
|
|
|
* lukas/erts/process_memory_crash_dump/OTP-11098:
Bump crash dump version
|
|
|
