| Age | Commit message (Collapse) | Author |
|---|
|
In Erlang R16B03-1, I've been passing raw options to ssl:listen as
follows, and it's been working fine:
% The constants are defined elsewhere.
LOpts = [{raw, ?IPPROTO_TCP, ?TCP_MAXSEG, <<MSS:32/native>>} | ...],
{ok, LSocket} = ssl:listen(0, LOpts)
In Erlang 17.3, this fails with
{option_not_a_key_value_tuple,{raw,6,2,<<64,2,0,0>>}}
I originally reported this in
http://erlang.org/pipermail/erlang-questions/2014-October/081226.html
I need to pass this particular raw option to ssl:listen, because it
needs to be applied when the socket is first opened -- between inet:open
and prim_inet:listen -- it cannot be applied later by setopts. This
means that it needs to be done by inet_tcp:listen/2 -- well, actually by
inet:open/8, but...
Otherwise it's racey -- a client could connect between prim_inet:listen
and the setopts call. The MSS option is advertised in the SYN,ACK
packet, and can't be changed later.
|
|
|
|
|
|
* rickard/end-time-fix/OTP-12896:
Fix calculation of end time
|
|
* rickard/monotonic-clock-source/OTP-12895:
Prefer monotonic time that stop during suspend
|
|
* rickard/read_corrected_time/OTP-12894:
Avoid unnecessary copying of data when retrieving corrected monotonic time
|
|
* rickard/gettimeofday/OTP-12892:
Add the --enable-gettimeofday-as-os-system-time configure switch
|
|
* rickard/trace-file-eintr-bug/OTP-12890:
Handle EINTR in trace_file_drv
|
|
* rickard/non-smp-trace-port-exit-bug/OTP-12889:
Teach non-smp VM how to deal with trace port crash
Test case testing crash in tracer port
|
|
|
|
|
|
|
|
Forces usage of gettimeofday() for OS system time
|
|
|
|
|
|
|
|
|
|
|
|
* sverk/poll-lost-wakeup/OTP-12859:
erts: Fix race in poller thread wake up
|
|
|
|
|
|
* ia/ssl/modern-timetrap:
ssl: Make init functions fail if make_certs:all fails
ssl: Avoid sleep
ssl: modernize timetrap handling
|
|
|
|
* rickard/debug-fix/OTP-12650:
Fix node/dist refc count
|
|
|
|
|
|
* vinoski/driver-doc-fix/OTP-12855:
Fix documentation of ERL_DRV_ERROR_ERRNO
|
|
When possible avoid sleep in test cases.
|
|
Watchdog is legacy test_server use only ct:timetrap/1
|
|
|
|
OTP-12845
* bruce/change-license:
fix errors caused by changed line numbers
Change license text to APLv2
|
|
* sverk/nosmp-init-timer-wheel:
erts: Fix timer wheel initialization bug for non smp
|
|
* egil/fix-erl_poll-darwin:
erts: Fix erl_poll on darwin
|
|
* kostis/hipe-no-dial-warnings:
Eliminate a dialyzer warning
Simplify handling of o2 and o3 option expansion
|
|
|
|
* hb/dialyzer/fix_opaque_types/OTP-12493:
dialyzer: Correction of last commit
|
|
|
|
* anders/diameter/18/OTP-12588:
vsn -> 1.10
Remove dead upgrade-related code
Update appup for 18
Fix release note typo
Fix comment typo
|
|
* anders/diameter/sctp/OTP-12768:
Fix connection timeouts in test transports
Fix start order of alternate transports
Log discarded answers
Ensure accepting processes are first in, first out
Remove upgrade-related code
Be less parallel in traffic suite
Increase send/receive buffers for testsuite SCTP listeners
Decrease unnecessarily long testsuite timetraps
Simplify accepting transport start
Simplify peeloff signaling
Simplify socket close at terminate
Don't monitor listener after peeloff
Don't receive initial messages out of order
Remove assumption that SCTP association ids will be unique
|
|
* anders/diameter/grouped_errors/OTP-12721:
Fix decode of Grouped AVPs containing errors
Simplify logic
Simplify logic
|
|
Without a timeout, TCP/SCTP connect can take some time to fail, which
resulted in failures in the pool suite after the parent commit fixed the
previously faulty sctp-first-then-tcp connect.
|
|
A transport configured with diameter:add_transport/2 can be passed
multiple transport_module/transport_config tuples in order to specify
alternate configuration, modules being attempted in order until one
succeeds. This is primarily for the connecting case, to allow a
transport to be configured to first attempt connection over SCTP, and
then TCP in case SCTP fails, with configuration like that documented:
{transport_module, diameter_sctp},
{transport_config, [...], 5000},
{transport_module, diameter_tcp},
{transport_config, [...]}
If the options are the same in both cases, another possibility would be
configuration like this, which attaches the same transport_config to
both modules:
{transport_module, diameter_sctp},
{transport_module, diameter_tcp},
{transport_config, [...], 5000},
However, in this case the start order was reversed relative to the
documented order: first tcp, then sctp. This commit restores the
intended order.
OTP-12851
|
|
|
|
Not needed with the parent commit's restart_application.
|
|
To diameter_lib:log/4, which was last motivated in commit 39acfdb0.
|
|
|
|
A listener process in diameter_sctp starts accepting transport processes
as required, either as associations are established or as diameter asks
for a processes to be started. Since this can happen in any order, the
listener maintains two queues: one for processes that diameter has
requested and which are waiting to be given an association, another for
processes that have been started to become owners of an association but
are waiting for diameter to request them. Only one queue at a time is
non-empty. The first queue's length is bounded by the number of
accepting processes configured as pool_size. Entries in the second queue
are short-lived since diameter starts a replacement transport process
whenever an existing one dies or communicates that it has an
association.
The two queues were previously implemented in an ets ordered_set, whose
keys were the pid() of transport processes. Removing an element from the
queue was then done with ets:first/1. The problem with this it's not
really a queue: there's no guarantee that pid-ordering is the same as
the order in which processes are started. If it isn't then it's possible
that an established association never be given to diameter as a
transport process if there's always a newer association whose pid sorts
first. This isn't a problem in practice since it would require new
associations to be established faster than diameter starts transport
processes, but redo the implementation as a queue, with strict FIFO
semantics.
|
|
The changes in some of the previous commits assume application restart.
|
|
At the current count, there are 128 groups run in parallel, each of
which runs 52 testcases in parallel. That makes for 128*52 = 6656
testcases, which is probably also a factor in the sporadic failures
addressed by the parent commit. Don't run the 128 groups in parallel.
|
|
The defaults result in sporadic timeouts in the traffic suite after
testing over SCTP was added in commit fadf753b. The behaviour looks to
be specific to SLES 11, and is presumably the same resends/congestion
that lead to the buffers being increased in the gen_sctp suite in commit
12febf13 (and commented in commit e931991f). The behaviour hasn't been
seen on SLES 10.
|
