| Age | Commit message (Collapse) | Author |
|---|
|
The previous commit ensures that only one will be reported in an answer
message when diameter itself sets Result-Code/Failed-AVP.
The order of errors in #diameter_packet.errors is that in which they're
detected, not the reverse as previously.
|
|
When setting these from an #diameter_packet.errors list, select one
Result-Code or {Result-Code, Failed-AVP}, instead of accumulating all
AVP's from the 2-tuples in the list. This is more in keeping with RFC
6733:
7.5. Failed-AVP AVP
The Failed-AVP AVP (AVP Code 279) is of type Grouped and provides
debugging information in cases where a request is rejected or not
fully processed due to erroneous information in a specific AVP. The
value of the Result-Code AVP will provide information on the reason
for the Failed-AVP AVP. A Diameter answer message SHOULD contain an
instance of the Failed-AVP AVP that corresponds to the error
indicated by the Result-Code AVP. For practical purposes, this
Failed-AVP would typically refer to the first AVP processing error
that a Diameter node encounters.
The text of RFC 3588 was less specific, not including the last two
sentences.
Note that an improper AVP Length will result in both 5014 and 5005 being
detected for the same AVP. Without this commit, Failed-AVP would be
populated with two AVP's for the same error.
|
|
|
|
|
|
Invalid lengths come in two flavours: ones that correctly point at the
end of an AVP's payload but don't agree with its type, and ones that
point elsewhere. The former are relatively harmless but the latter leave
no way to recover AVP boundaries, which typically results in failure to
decode subsequent AVP's in the message in question.
In the case that AVP Length points past the end of the message, diameter
incorrectly regarded the error as 5009, INVALID_AVP_BITS: not right
since the error has nothing to do with AVP Flags. Ditto if the length
was less than 8, a minimal header length. Only in the remaining case was
the detected error 5014, INVALID_AVP_LENGTH. However, in this case it
slavishly followed RFC 3588 in suggesting the undecodable AVP as
Failed-AVP, thereby passing the woeful payload back to the sender to
have equal difficulty decoding. Now follow RFC 6733 and suggest an AVP
with a zero-filled payload.
|
|
When setting Failed-AVP in a message record, it was never tested that
the field was actually present. RFC 6733 says it should be, 3588 says
MAY.
|
|
To return what RFC 6733 says. 3588 says less so follow 6733, even
though the extra specification of 6733 means that it isn't strictly
backwards compatible. In particular, 6733 says to send a zero'd payload
or none at all while 3588 says to send the offending AVP, despite the
fact that the peer will likely have equal difficulty in decoding it.
The testcases now fail, which will be remedied in subsequent commits.
|
|
Such a length caused decode of a message with valid (24-bit) length to
fail. Note that the error detected is wrong: it should be 5014
(INVALID_AVP_LENGTH), not 3009 (INVALID_AVP_BITS). This will be dealt
with by OTP-11007.
|
|
* fredrik/ssh/unicode_adapt:
ssh: unicode adaptions
|
|
* anders/diameter/mkdir_race/OTP-11051:
Fix mkdir race
|
|
|
|
* siri/cuddle-with-tests:
[common_test] Adjusted timers in ct_repeat_testrun_SUITE
[common_test] Extend timer in cover_SUITE for slow test host
[sasl] Remove compiler warning in release_handler_SUITE
[common_test] Kill slave nodes after test cases in cover_SUITE
[reltool] Remove erlang:port_close/1 for node port
|
|
This is to allow slower test hosts.
|
|
|
|
|
|
The test case cover_SUITE:slave_start_slave often fails on a test host
(windows) due to a hanging node from an earlier test run. In the first
test, the slave fails to start (boot_timeout?) and is never connected
to the test node. The attempt at cleaning up used nodes() to find
which slaves to kill - so in the case where the slave was never
connected it was never killed. This is no changed so each slave is
explicitly killed by name - no matter if it is pingable or not.
|
|
Test nodes are started with erlang:open_port/2, using the -detached
option to erl. -detached causes the port returned from open_port/2 to
be closed automatically. Some test cases failed occasionally with a
badarg when attempting to close the port with erlang:port_close/1. To
avoid this the call to port_close/1 is now removed.
|
|
* ak/fix-cpu-overhead-of-timer-server/OTP-11053:
fix excessive CPU consumption of timer_server
|
|
I've found stdlib's timer to burn CPU without good reason. Here's what
happens.
The problem is that it sleeps in milliseconds but computes time in
microseconds. And there is bug in code to compute milliseconds to
sleep. It computes microseconds difference between now and nearest
timer event and then does _truncating_ division by 1000. So on average
it sleeps 500 microseconds _less than needed_. On wakeup its checks do
I have timer tick that already occurred? No. Ok how much I need to
sleep ? It does that bad computation again and gets 0
milliseconds. So next gen_server timeout happens right away only to
find we're still before closest timer tick and to decide to sleep 0
milliseconds again. And again and again.
This commit changes division to pick ceiling of ratio rather than
floor. So that we always sleep not less then difference between now
and closest event time.
|
|
Creating examples/code and examples/dict in parallel can fail when
examples doesn't exists. This has been seen on FreeBSD.
|
|
* maint-r16:
Prepare release
Prepare release
Do not count offline run-queues as empty
Prepare release
Prevent loss of objects after the extension marker
Don't lose the extension mark for object set parameters
Conflicts:
erts/vsn.mk
|
|
* maint-r15:
Prepare release
Dummy merge.
|
|
|
|
* rickard/sched/OTP-11022:
Do not count offline run-queues as empty
|
|
|
|
* siri/ct/error-printout-link/OTP-11044:
[common_test] Add link from red error notification to full error description
[common_test] Use max importance when logging errors
|
|
* siri/doc-fnu-opts/OTP-10901:
Add documentation of w, i and e addition to +fnu and +fna switches to erl
|
|
* fredrik/inets/unblock_timer:
inets: stop block timer with the right arguments
|
|
These were documented in the stdlib user's guide, but not in the
reference manual for erl. This has now been corrected.
|
|
* peppe/common_test/log_cache2:
Bug fixes in Common Test log cache
|
|
|
|
* peppe/common_test/log_cache:
Implement cache for the CT logger
OTP-10855
|
|
OTP-10855
|
|
* bjorn/fix-encoding/OTP-11041:
Encode Erlang source files with non-ascii characters in UTF-8
|
|
To ensure that 'master' compiles when we merge 'maint' to it,
regardless of which encoding is default in 'master', all source
files with non-ascii characters *must* have the encoding specified.
|
|
* bjorn/asn1/fix-lost-extension-mark/OTP-10995:
Prevent loss of objects after the extension marker
Don't lose the extension mark for object set parameters
|
|
|
|
In test case log, the red error notification may sometimes be
truncated. This commit adds a link from this printout to the end of
the log where the full error description and stacktrace i written.
|
|
This commit adds ?MAX_IMPORTANCE to error notifications in the test
case log, and it makes sure that the printout says "CT Error
Notification".
Printouts from cth_log_redirect (sasl and error_reports) uses
?STD_IMPORTANCE and states "System" in the printout.
|
|
|
|
|
|
* bjorn/asn1/fix-lost-extension-mark/OTP-10995:
Prevent loss of objects after the extension marker
Don't lose the extension mark for object set parameters
|
|
|
|
* lh/demonitor-flush/OTP-11039:
Use erlang:demonitor(Ref, [flush]) where applicable
|
|
* nox/file-receive-optim/OTP-11040:
Optimize communication with file io server
|
|
|
|
* anders/diameter/watchdog_leak/OTP-11019:
Minor doc fix
Add testcase to exercise reconnect behaviour
Fix watchdog table leak
|
|
* anders/diameter/address_config/OTP-10986:
Comment fix
More robust listening port lookup in test suites
Update example client to allow default local address
Make explicit local address to diameter_tcp:start/3 optional
Add transport interface 'connected' message with local address list
|
|
|
|
|
