| Age | Commit message (Collapse) | Author |
|---|
|
|
|
A service process maintains a table keyed on watchdog process pids. When
a watchdog process dies the corresponding entry should be removed but
this was broken in commit f115a9f7, causing entries with watchdog state
DOWN to accumulate.
Watchdog processes die as a result of diameter:remove_transport/2, or
when a peer reestablishes a connection in the listening case. Neither is
typically a frequent occurrence.
The fault manifests itself in the return value of
diameter:service_info(SvcName, transport), which displays entries for
watchdog processes that are no longer alive.
|
|
* anders/diameter/service_config/OTP-11017:
Fix handling of unknown options to diameter:start_service/2
|
|
* anders/diameter/release_notes/OTP-11014:
Fix faulty capitalization in generated release notes
|
|
* fredrik/ssh/ssh_daemon_pass_arg/OTP-10975:
ssh: If not valid expression, rather than generate a error, try to use the cmd.
|
|
* siri/cuddle-with-tests:
[reltool] Clean up work dir after test
[observer] Add debug printouts in ttb_SUITE
|
|
* hb/remove_unused_ps_files/OTP-11016:
Remove unused Postscript files
|
|
|
|
* ia/ssl/crypto/PSK-SRP/doc:
ssl & crypto: Documentation enhancements
|
|
Diameter = the protocol
diameter = the Erlang application
|
|
{error, Reason} is now returned, instead of the options being ignored.
Note that diameter:add_transport/2 purposely ignores unknown options and
that the behaviour is documented. This is historic: some users depend on
it in order to store their own options for identifying transport config,
instead of using the reference returned by add_transport.
|
|
Conflicts:
erts/vsn.mk
|
|
|
|
OTP-10450
|
|
* hb/remove_unused_xml_files:
Remove unused XML files
|
|
|
|
* egil/r16/fix-delete_element/OTP-10932:
erts: Refactor erlang:insert_element/3 for clarity
erts: Fix copy error in erlang:delete_element/2
|
|
* rickard/sys-flags/OTP-11000:
Fix `+sws' and `+swt' system flags
|
|
* rickard/thr_prgr_later_op/OTP-10994:
Make port close not be delayed
Be less eager requesting wakeup for cleanup jobs
|
|
* rickard/is_process_alive/OTP-10926:
Fix erlang:is_process_alive/1
|
|
Drivers are dereferenced when the port is completely gone, in the operation
scheduled with erts_schedule_thr_prgr_later_op. If we use
erts_schedule_thr_prgr_later_cleanup_op, it may not happen
for a long time and the driver can not be unloaded.
We can not dereference the driver before the thread_progress_later
thing, because references to the driver may exist in other threads, so
the unloading of the driver may free locks held by other schedulers and
whatnot.
|
|
incompatible.xml and highlights.xml haven't been included anywhere
for a long time.
|
|
* siri/test_server/hanging-io-request/OTP-10991:
[test_server] Don't hang due to invalid io request
|
|
* siri/common_test/force_stop-skip_rest/OTP-10856:
[common_test] Document '-force_stop skip_rest' option to ct_run
[common_test] Add tests for repeated testruns
[common_test] Add support for testing repeated testruns
[common_test] Add -force_stop skip_rest option when repeating tests
|
|
* sv/stdlib/sys-get-state/OTP-11013:
Removed ?line macro
add sys:get_state/1,2 and sys:replace_state/2,3
update sys:get_status/2,3 documentation for gen_event
|
|
* fredrik/erts/to_erl_handshake/OTP-11012:
Changed handshake from to_erl to run_erl, on behalf of shell search
|
|
|
|
|
|
* ks/erlang-spawn_opt-process_level/OTP-11008:
Fixed documentation for priority_level to spawn_opt
Consistent definition of priority levels
|
|
|
|
In the specs and the documentation of the spawn_opt family of functions
there is the following definition of priority levels:
Level = low | normal | high
However, the process_flag/1 function in that module reads:
process_flag(Flag :: priority, Level) -> OldLevel
Types:
Level = OldLevel = priority_level()
priority_level() = low | normal | high | max
This is clearly inconsistent. Change specs to use the process_level()
type declaration instead of re-defining it in various places.
|
|
* ia/ssl/PSK-SRP:
ssl: Use new SRP crypto API
crypto: New SRP API
CRYPTO: add algorithms/0 function that returns a list off compiled in crypto algorithms
ssl: Add option to list all available ciper suites and enhanced documentation
SSL: add documentation for PSK and SRP ciphers options
SSL: enable hash_size values for sha224, sha384 and sha512
SSL: add tests for PSK and SRP ciphers
SSL: add TLS-SRP (RFC 5054) cipher suites
CRYPTO: add support for RFC-2945 SRP-3 and RFC-5054 SRP-6a authentication
crypto: Refactor mod_exp_nif
SSL: add TLS PSK (RFC 4279 and RFC 5487) cipher suites
|
|
|
|
|
|
|
|
Adjust API to better fit in with similar funtions in crypto
|
|
algorithms
add algorithms/0 function that returns a list off compiled in crypto algorithms
and make tests suites with SHA226, SHA256, SHA384 and SHA512 conditional based
on that
|
|
|
|
|
|
* nox/fix-bc-optim/OTP-11005:
Add a new option +clint0 to the compiler
Fix optimization of some binary comprehensions
|
|
* nox/fix-snmp-gitignore/OTP-11004:
Fix SNMP gitignore files
|
|
* ta/ct_run-unused-fun/OTP-11003:
ct_run: delete unused function
|
|
* bh/fix-erlsrv-usage-typo/OTP-11002:
Correct typo in erlsrv usage.
|
|
|
|
At Erlang Factory 2013 there was discussion during one of the talks about
the sys:get_status functions and how useful they were for debugging. Geoff
Cant mentioned it would be very useful if the sys module also provided
functions to use while debugging to get just the state of a process and
also to be able to replace the state of a process, and many others in the
audience appeared to agree.
The sys:get_state/1,2 functions return the state of a gen_server, gen_fsm,
or gen_event process. The return value varies depending on the process
type: process state for a gen_server, state name and state data for a
gen_fsm, and handler module, handler id, and handler state for each handler
registered in a gen_event process.
The sys:replace_state/2,3 functions allow the state of a gen_server,
gen_fsm, or gen_event process to be replaced with a new state. These
functions take a function argument that updates or replaces the process
state; using a function to change the state eliminates the race condition
of first reading the state via sys:get_state/1 or sys:get_state/2, using
its return value to create a new state, and then replacing the old state
with the new state, since during that time the process might have received
other calls or messages that could have changed its state.
* For a gen_server process, the state replacement function takes the
process state as an argument and returns a new state.
* For a gen_fsm process, the state replacement function gets a tuple of
{StateName, StateData} and returns a similar tuple that specifies a new
state name, new state data, or both.
* For a gen_event process, the state replacement function is called for
each registered event handler. It gets a tuple {Module, Id, HandlerState}
and returns a similar tuple that specifies the same Module and Id values
but may specify a different value for HandlerState.
If the state replacement function crashes or results in an error, the
original state of a gen_server or gen_fsm process is maintained; if such a
crash occurs for a gen_event process, the original state of the event
handler for which the state replacement function was called is maintained,
but the states of other event handlers of the same gen_event process may
still be updated if no errors or crashes occur while replacing their
states.
Add documentation for sys:get_state/1,2 and sys:replace_state/2,3. The
documentation explicitly notes that the functions are intended for use
during debugging.
Add new tests for these functions to gen_server_SUITE, gen_fsm_SUITE, and
gen_event_SUITE.
|
|
* mh/emacs-package/OTP-10999:
erlang-mode: Add autoload cookies for file extension associations
|
|
* sverk/meta-trace-leak:
erts: Fix memleak related to meta tracing
OTP-10997
|
|
* mh/dialyzer-scan-error/OTP-10996:
Improve Dialyzer output for scan errors
|
|
|
|
|
