Age | Commit message (Collapse) | Author |
|
|
|
make_script will give warning but allow it
make_relup will fail since it is not possible to upgrade if sasl is
not included in both releases.
|
|
This commit adds a check that all instructions in the relup are
valid. Earlier, the last part (after point_of_no_return) was not
checked before the actual installation started, meaning that if the
relup was hand written, there was a potential for crashing the upgrade
here.
|
|
|
|
New emulator upgrade mechanism introduced in R15 can only work if the
sasl version to upgrade from is 2.2 or later. I.e. if we are already
running at least R15.
This commit adds backwards compatiblity for upgrades from earlier
versions, meaning that the new code is loaded into the old emulator
and code_change is executed - then after all application code is
updated, the emulator is restarted with the new erts version.
Note that this might cause problems if the new code is compiled with
the new emulator and there have been updates to the beam format. If
this happens, the workaround is to compile the new code with the old
emulator.
|
|
This is needed for sasl_SUITE:appup_test to work, therefore we do not
wait until release time.
|
|
|
|
This is an attempt to correct a failing test case. It the test fails
on having restarted only once, we give it another try to see if the
second restart will happen.
|
|
The appup files for kernel, stdlib and sasl did not contain any
UpFromVsn and DownToVsn. This means that it was not possible to create
a relup file with systool:make_relup if any of these applications had
changed.
This commit adds entries in the appup files for a maximum of two major
releases back - all with only one upgrade instruction:
restart_new_emulator. The point is to allow relups to be generated,
but ensure that no soft upgrade is done for these three applications -
i.e. they will always cause a restart of the emulator prior to all
other upgrade instructions from other applications.
Test cases (appup_test) are added to kernel_SUITE, stdlib_SUITE and
sasl_SUITE. These all check that expected versions are matched in the
appups, and illegal versions (older than two major releases, or in any
other way illegal) do not match. The test is written in a general way
where it is assumed that the version of these applications are stepped
according the the rule that major releases step the second number,
maintenance releases step the third number and patches step the fourth
number.
|
|
Earlier, there was only one valid instruction to restart the emulator
in an appup/relup script, 'restart_new_emulator'. A new instuction,
'restart_emulator', is now added, and the meaning is as follows:
'restart_new_emulator' is mainly for the core applications (erts,
kernel, stdlib and sasl), and it indicates that there is new core
functionality in the release and the emulator needs to be restarted
before executing the upgrade scripts. If this instruction exists, a
temporary release will be created which consists of the new version
erts, kernel, stdlib and sasl, and the old versions of all other
applications. After restarting the emulator with this temporary
release, the rest of the upgrade instructions are executed, including
loading of new versions.
'restart_emulator' can be used by any application if a restart of the
emulator is needed after the upgrade instructions have been
executed. In this case, the emulator will be restarted with the new
release (i.e. not a tempoarary one) after all other upgrade
instructions for all applications have been excecuted.
|
|
The sys.config file used for the temporary release in an erts upgrade
is now a hybrid where kernel, stdlib and sasl configuration is taken
from the new release, and other configuration is taken from the old
release. I.e. similar to how the temporary boot file is created.
|
|
In order to avoid duplication of upgrade instructions in .appup files,
we now allow regular expressions to specify the UpFrom and DownTo
versions. To be considered a regular expression, the version
identifier must be specified as a binary, e.g.
<<"2\\.1\\.[0-9]+">> will match versions 2.1.x, where x is any number.
|
|
If the version of erts differs between two releases, the release
handler automatically adds a 'restart_new_emulator' instruction to the
upgrade script (relup). Earlier, this instruction was always added at
the end of the upgrade script, causing the following sequence of
operations during an upgrade (a bit simplified):
1. suspend processes
2. load new code
3. execute code_change functions
4. resume processes
5. restart emulator with new erts version
Obviously, this caused the new code to be loaded into the old emulator
and this would fail if the beam format had been changed in the new
version of the emulator.
To overcome this problem, this commit changes the order of the
instructions, so for upgrade with changed erts version we now have:
1. restart emulator with new erts, kernel, stdlib and sasl versions,
but old versions of all other applications.
2. suspend processes
3. load new code
4. execute code_change functions
5. resume processes
This is implemented by creating a temporary release, including new
erts, kernel, stdlib and sasl from the new release and all other
applications from the old release. A new boot file for this temporary
release is created, which includes a new 'apply' instruction to run
release_handler:new_emulator_upgrade/2. Then the emulator is restarted
using this boot file - and release_handler:new_emulator_upgrade/2
executes the rest of the upgrade script.
For downgrade, the order will be as before:
1. suspend processes
2. execute code_change functions with 'down'-indication
3. load old code
4. resume processes
5. restart emulator with old erts version
|
|
* siri/kernel/application-shutdown-timeout/OTP-9540:
Add documentation and test for kernel env var shutdown_timeout
Add env var shutdown_timeout to kernel to avoid deadlock on node shutdown
|
|
* bjorn/erts/refc-binary-literals/OTP-9486:
external.c: Remove the option to create over-sized heap binaries
Allow refc binaries in literal pools
code_SUITE clean-up: Remove experimental 'constant_pool' option
|
|
* raimo/sctp-dev/OTP-9239: (21 commits)
erts: Possible bugfix for error chunk on old Solaris 10
kernel: Documented gen_sctp:peeloff/2
kernel: Adjust SCTP test to SuSE quirk
erts: Fixes for SCTP on old Solaris 10
Update preloaded files
erts,kernel: Return eprotonosupport when SCTP is not supported
kernel: Adjust SCTP tests to Solaris quirks
erts: Fix SCTP decoding byteorder bug for adaptation_ind
kernel: Rewrite SCTP test socket handler
kernel: Fix SCTP tests for the FreeBSD protocol stack
kernel: Bugfix - SCTP connect with sndrcvinfo in assoc_change event
erts: Default enable SCTP in configure
Update primary bootstrap and preloaded files
erts: Use SCTP functions in default libs
erts: Improve SCTP message defragmenting
erts,kernel: Bugfix - collect fragmented SCTP messages on recv
kernel: Add tests for gen_sctp:peeloff/2
erts,kernel: Implement gen_sctp:peeloff/2
kernel: Add tests for SCTP stream sockets
erts,kernel: Add type stream sockets to SCTP
...
|
|
|
|
|
|
inet:port/1 on peeled off socket returns 0. Bug? Who's?
|
|
* sverker/valgrind-fixing:
erts: valgrind suppressions for prebuilt terms in os_info_init
Fix dlopen-leak of drivers with incorrect version
erts: Add valgrind suppression files
erts: Remove valgrind limit for erts_alloc_permanent_cache_aligned
erts: Fix write-after-free bug in inet driver
ETS: Fix faulty size calculation SIZEOF_EXTSEG
ETS: Fix valgrind PossiblyLost in ETS hash tables
|
|
|
|
|
|
It is better that gen_sctp:open/0-2 returns the informative Posix
return code {error,eprotonosupport} than previously {error,badarg}
when SCTP is not supported since it is so platform dependent.
|
|
|
|
|
|
The socket handler needs more flexibility regarding which events
are expected to be received.
|
|
|
|
On some platforms (FreeBSD) the #sctp_assoc_change{state=comm_up}
event arriving during gen_sctp:connect/4,5 contains ancillary
data #sctp_sndrcvinfo{}. That was not expected by the code.
|
|
|
|
|
|
No tracing is implemented yet.
|
|
FPE = floating point exceptions
|
|
|
|
Make sure that badarith is thrown even if end result is not inf/NaN
|
|
|
|
Bug causing hipe to crash. Only provoked when changing the RTL
generation for floating point operations.
hipe_rtl:defines() was called with a expression ID instead of an
expression. Use expr_id_map_get_expr() to get expression from ID.
Need to pass along IdMap in order to do that.
|
|
No semantic change, just code clarification.
Use unique macro names instead of redefining the original ones.
|
|
Moved public_key ignores to .gitignore in public_key and removed
no longer needed ssl ignores.
|
|
On e.g FreeBSD the functions sctp_bindx() and sctp_peeloff() do not require
any extra linkage library flags and there is no dynamic lib to load
for them; use configure to find them.
|
|
Receive several fragments within the same receive loop if possible.
|
|
|
|
|
|
|
|
Also fix tests for new prim_inet:open function.
|
|
|
|
There is nothing strange about the client shutting down, so the ODBC
process should exit normally to avoid generating a crash report for a
non-problem.
Update appup.src for new version
|
|
Since refc binaries are now supported in literal pools, there is no
longer any need to allow the creation of over-sized heap binaries.
|
|
To simplify the implementation of literal pools (constant pools)
for the R12 release, a shortcut was taken regarding binaries --
all binaries would be stored as heap binaries regardless of size.
To allow a module containing literals to be unloaded, literal
terms are copied when sent to another process. That means that
huge literal binaries will also be copied if they are sent to
another process, which could be surprising.
Another problem is that the arity field in the header for the heap
object may not be wide enough to handle big binaries.
Therefore, bite the bullet and allow refc binaries to be stored
in literal pools. In short, the following need to be changed:
* Each loaded module needs a MSO list, linking all refc binaries
in the literal pool.
* When check_process_code/2 copies literals to a process heap,
it must link each referenced binary into the MSO list for the
process and increment the reference counter for the binary.
* purge_module/1 must decrement the reference counter for each
refc binary in the literal pool.
|
|
|
|
* bjorn/erts/code-loading/OTP-9720:
BEAM loader: Don't stop other schedulers until truly needed
BEAM loader: Refactor code loading into separate functions
beam_load.c: Factor out cleaning up of the loader state into free_state()
BEAM loader: Clean up handling of error reasons
Remove the useless -l option
beam_load.c: Simplify handling of the bs_put_string_II instruction
beam_load.c: Remove the unused struct LoadedCode
|