| Age | Commit message (Collapse) | Author |
|---|
|
To enable it you have to modify the OSESSL variable in the
ose xcomp file.
|
|
Make it possible to change the number of write_concurrency locks to use. This
is usefull to change when you for some reason want to use more/less locks
per write_concurrency ets table. eg. OSs with a limit on how many mutexes
can exist at once.
|
|
This port has support for both non-smp and smp.
It contains a new way to do io checking in which erts_poll_wait
receives the payload of the polled entity. This has implications
for all linked-in drivers.
|
|
* vinoski/ds:
initial support for dirty schedulers and dirty NIFs
|
|
Add initial support for dirty schedulers.
There are two types of dirty schedulers: CPU schedulers and I/O
schedulers. By default, there are as many dirty CPU schedulers as there are
normal schedulers and as many dirty CPU schedulers online as normal
schedulers online. There are 10 dirty I/O schedulers (similar to the choice
of 10 as the default for async threads).
By default, dirty schedulers are disabled and conditionally compiled
out. To enable them, you must pass --enable-dirty-schedulers to the
top-level configure script when building Erlang/OTP.
Current dirty scheduler support requires the emulator to be built with SMP
support. This restriction will be lifted in the future.
You can specify the number of dirty schedulers with the command-line
options +SDcpu (for dirty CPU schedulers) and +SDio (for dirty I/O
schedulers). The +SDcpu option is similar to the +S option in that it takes
two numbers separated by a colon: C1:C2, where C1 specifies the number of
dirty schedulers available and C2 specifies the number of dirty schedulers
online. The +SDPcpu option allows numbers of dirty CPU schedulers available
and dirty CPU schedulers online to be specified as percentages, similar to
the existing +SP option for normal schedulers. The number of dirty CPU
schedulers created and dirty CPU schedulers online may not exceed the
number of normal schedulers created and normal schedulers online,
respectively. The +SDio option takes only a single number specifying the
number of dirty I/O schedulers available and online. There is no support
yet for programmatically changing at run time the number of dirty CPU
schedulers online via erlang:system_flag/2. Also, changing the number of
normal schedulers online via erlang:system_flag(schedulers_online,
NewSchedulersOnline) should ensure that there are no more dirty CPU
schedulers than normal schedulers, but this is not yet implemented. You can
retrieve the number of dirty schedulers by passing dirty_cpu_schedulers,
dirty_cpu_schedulers_online, or dirty_io_schedulers to
erlang:system_info/1.
Currently only NIFs are able to access dirty scheduler
functionality. Neither drivers nor BIFs currently support dirty
schedulers. This restriction will be addressed in the future.
If dirty scheduler support is present in the runtime, the initial status
line Erlang prints before presenting its interactive prompt will include
the indicator "[ds:C1:C2:I]" where "ds" indicates "dirty schedulers", "C1"
indicates the number of dirty CPU schedulers available, "C2" indicates the
number of dirty CPU schedulers online, and "I" indicates the number of
dirty I/O schedulers.
Document The dirty NIF API in the erl_nif man page. The API closely follows
Rickard Green's presentation slides from his talk "Future Extensions to the
Native Interface", presented at the 2011 Erlang Factory held in the San
Francisco Bay Area. Rickard's slides are available online at
http://bit.ly/1m34UHB .
Document the new erl command-line options, the additions to
erlang:system_info/1, and also add the erlang:system_flag/2 dirty scheduler
documentation even though it's not yet implemented.
To determine whether the dirty NIF API is available, native code can check
to see whether the C preprocessor macro ERL_NIF_DIRTY_SCHEDULER_SUPPORT is
defined. To check if dirty schedulers are available at run time, native
code can call the boolean enif_have_dirty_schedulers() function, and Erlang
code can call erlang:system_info(dirty_cpu_schedulers), which raises
badarg if no dirty scheduler support is available.
Add a simple dirty NIF test to the emulator NIF suite.
|
|
* rzezeski/rz_fix_dtrace_illumos/OTP-11622:
Fix DTrace build on Illumos
|
|
* bjorn/erts/zlib-1.2.8:
configure: Prefer the system's zlib over own our zlib source
Update preloaded modules
Add the 'rle' zstrategy
Don't make gzio.c dependent on the zutil.h header file
Update zlib to 1.2.8
erts/zlib: Remove unused file example.c
|
|
WxWidgets (used by the wx application) also uses zlib. To
ensure that the run-time system and WxWidgets use the same version
of zlib, use the system's zlib if present.
Also, the system's zlib may be specially optimized and thus faster
than our own generic source code.
We only use zlib versions that are "good enough". For now, that
means 1.2.5 or higher.
Remove the option --enable-shared-zlib and add the option
--enable-builtin-zlib to force the use of the built-in zlib.
|
|
Recent versions of ncurses can be built with terminfo symbols
moved into the separate tinfo library.
This patch prevents erts configure from dying by adding the tinfo
library to list of termcap lib candidates.
|
|
DTrace was recently patched in Illumos to fail to create an object
file if no probes are found.
* https://www.illumos.org/issues/4248
* https://github.com/illumos/illumos-gate/commit/54a20ab41aadcb81c53e72fc65886e964e9add59
This patch fixes two issues:
* Modify the configure script to pass an object file to `dtrace -G`
that actually invokes a probe.
* Remove creation of `dtrace_user.o` from the dyntrace Makefile. In a
previous commit [1] Scott Fritchie relocated all the user probes
into the VM proper due to difficulties with DTrace probes in shared
libraries. The `dtrace_user.d` file is now empty and generates a
header file with nothing in it. There is no longer any reason to
generate `dtrace_user.o` because all the probes are in the VM. Thus
all the steps for building `dtrace_user.o` have been removed.
[1]: https://github.com/erlang/otp/commit/75552bd3bb4e7f3cf4dab81a5c81cf73b1d3fb99
|
|
|
|
|
|
Conflicts:
erts/preloaded/ebin/prim_inet.beam
lib/kernel/test/gen_sctp_SUITE.erl
|
|
|
|
* maint:
Fix observer retrieval of alloc info
Fix documentation of the +MMsco switch
Replace the +MMscmgc switch with +MMscrfsd
Add switch for disabling sys_alloc carriers
Add support for locking mappings to physical memory
|
|
|
|
Using "+Mlpm all" switch all mappings made by the emulator will
be locked into physical memory.
|
|
* maint:
erts: Add max alignment posix_memalign configure check
|
|
On some OSs posix_memalign exists, but it does not allow for alignment
greater than the current page size. So we have to do a runtime check for
alignment size and also add cross compile options.
|
|
|
|
rickard/aligned-sys_alloc-carriers_maint/OTP-11318
Conflicts:
erts/emulator/beam/erl_alloc.c
erts/emulator/beam/erl_alloc_util.c
erts/emulator/beam/erl_alloc_util.h
|
|
erts_sys_aligned_alloc() is currently implemented using posix_memalign if
it exist, or using _aligned_malloc on Windows.
If erts_sys_aligned_alloc() exist allocators will create sys_alloc
carriers similar to how this was done pre-R16.
|
|
Conflicts:
erts/preloaded/ebin/prim_inet.beam
|
|
* raimo/linux-network-namespace-sockopt/OTP-11157:
Document socket option 'netns'
Rudimentary test
Make netns option value a string
Implement netns for SCTP + bugfixes
Implement netns option for TCP and UDP
Implement emulator netns support for TCP and UDP
|
|
None of the OTP linked-in driver are supported
|
|
Both crypto and asn1 are supported.
|
|
Some basic tests are already done in configure. This makes sure we
cover all cases by bailing out when compiling as well.
|
|
|
|
Build with fallback can be enabled by passing the `configure` command
line argument `--disable-smp-require-native-atomics`
|
|
* pan/raise_windows_version:
Raise the minimal supported Windows version
OTP-11145
|
|
To enable hipe on a Raspberry Pi, configure has to detect the ARM processor
correctly. On a Pi, uname detects the CPU as armv6l. Other CPU variants are
already detected with ARCH=arm, so does now the armv6l of the Raspberry Pi.
|
|
* nox/wide-chars/OTP-11088:
Support wide characters in the shell through wcwidth()
Fix bogus DEBUGLOG() incantations in ttsl_drv
|
|
From previous 0x0500 to 0x0501, which obsoletes W2k.
This is needed for full IPV6 support.
|
|
There is one remaining bug where ttsl_drv's state ends up inconsistent
with the terminal own state; when a wide character is entered on the
last column of the terminal.
Reported-by: Loïc Hoguin
|
|
Latest OS X versions ignore this flag as non PIC objects are
discouraged.
|
|
This hopefully detects fault glibc's where
fallocate64 is nonexistent.
|
|
writev will for large files return 0 indefinetely causing
the efile driver to go into an infinite loop.
|
|
|
|
|
|
* dgud/wx/fix-wx-2.9-compat/OTP-10407: (26 commits)
wx: Fix comments
wx: Workaround wx-2.9 bugs
wx: Mac fixes
wx: Fix demo and tests
wx: Allow 64 bits compilation on mac, requires wxWidgets-2.9
appmon: Move runtime part to runtime_tools app
reltool: fix wxWidgets-2.9 compability
debugger: Fix 2.9 compat
observer: Fix check for graphics contexts
Observer: Fix distribution dialog
observer: Fix font sizes
wx: Fix the demo
wx: Fix loading icons and cursors in Windows
wx: Remove unnecessary casts
wx: Fix changed getfunctions
wx: Depricate wxCursor new functions
wx: Fix int to enum
wx: Include correct m4 file in 2.9
wx: Update examples so they work with both wxWidgets 2.8 and 2.9
wx: Modify tests so they work on wxWidgets-2.9
...
|
|
|
|
* Default to 'no' for finding a working fallocate
|
|
This operation allows pre-allocation of space for files.
It succeeds only on systems that support such operation.
The POSIX standard defines the optional system call
posix_fallocate() to implement this feature. However,
some systems implement more specific functions to
accomplish the same operation.
On Linux, if the more specific function fallocate() is
implemented, it is used instead of posix_fallocate(),
falling back to posix_fallocate() if the fallocate()
call failed (it's only supported for the ext4, ocfs2,
xfs and btrfs file systems at the moment).
On Mac OS X it uses the specific fcntl() operation
F_PREALLOCATE, falling back to posix_fallocate() if
it's available (at the moment Mac OS X doesn't provide
posix_fallocate()).
On any other UNIX system, it uses posix_fallocate() if it's
available. Any other system not providing this system call
or any function to pre-allocate space for files, this operation
always fails with the ENOTSUP POSIX error.
|
|
Testing using wxWidgets-2.9 on mac
|
|
* raimo/IPV6_V6ONLY/OTP-8928:
kernel: Document socket option ipv6_v6only
kernel: Add test cases for socket option ipv6_v6only
erts,kernel: Implement socket option ipv6_v6only in erlang code
erts: Implement socket option IPV6_V6ONLY
erts: Add configure test for IPV6_V6ONLY
|
|
|
|
Reported-by: Matthew Dempsky
|
|
|
|
* tab/fix-sctp-multihoming-IPv6/OTP-10217:
Allow mixed IPv4 and IPv6 addresses to sctp_bindx
Add checks for in6addr_any and in6addr_loopback
Fix SCTP multihoming
inet_drv.c: Set sockaddr lengths in inet_set_[f]address
|
|
* msp/double_middle_endian/OTP-10209:
Configure now assumed normal doubles
Revise the autoconf tests for double middle endianness.
Add test for floating-point output to float_SUITE.
Unbreak floating point on middle-endian machines.
|
