| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This BIF's second parameter is a list of options.
Currently the only allowed option is {minor_version, Version}
where version is either 0 (default) or 1.
|
|
* dev:
code: Optimize purge/1 and soft_purge/1 using check_old_code/1
Add erlang:check_old_code/1
check_process_code/2: Quickly return 'false' if there is no old code
|
|
Add erlang:check_old_code/1 to quickly check whether a module
has old code. If there is no old code, there is no need to call
erlang:check_process_code/2 for all processes, which will save
some time if there are many processes.
|
|
|
|
|
|
concat_binary/1 was deprecated in R13B04, but already in
the R10B-2 release, the documentation recommends using
list_to_binary/1 instead.
|
|
An incorrect spec, rpc:yield/1, has been fixed.
|
|
|
|
|
|
|
|
|
|
* pg/freebsd-cpu-affinity-and-topology:
Add support for CPU affinity & topology detection on FreeBSD 8
OTP-8939
|
|
|
|
Id: OTP-8912
This patch creates a new family of flags with the "+z" prefix. It
further creates a new configuration option called "dbbl" (which is the
first letter of the name dist_buf_busy_limit). Example usage of this
flag would be "+zdbbl 1048576".
This patch creates an adjustable buffer limit for the amount of data
that may be buffered by the erlang distribution code (in dist.c
specifically). Before this patch, this hard-coded constant was used:
#define ERTS_DE_BUSY_LIMIT (128*1024)
When large binaries are transmitted between nodes (or simply a lot of
medium-sized binaries), it is very easy to hit the old 128KB limit.
Processes that use the erlang:system_monitor() BIF to monitor system
events can be spammed by {monitor, busy_dist_port, ...} message tuples
at rates of tens to even hundreds of messages/second.
A larger buffer limit will allow processes to buffer more outgoing
messages over the distribution. When the buffer limit has been
reached, sending processes will be suspended until the buffer size has
shrunk. The buffer limit is per distribution channel. A higher limit
will give lower latency and higher throughput at the expense of
higher memory usage.
A variation of this patch has been in commercial production use in at
least two companies that the author is aware of. Larger buffer values
can reduce the number of {monitor, busy_dist_port, ...} system
messages drastically, lower overall messaging latencies, and prevent
false timeouts and 'nodedown' messages in extremely busy Mnesia systems.
Test suite: there are two tests:
a. In erlexec_SUITE.erl to test basic set & get of the value
b. In distribution_SUITE.erl, to verify that setting +zdbbl very
low will actually change behavior.
|
|
|
|
* cg/docs-fixes:
Linkify applications listed under "See Also"
Fix minor typos in the documentation
|
|
semanticts -> semantics
where -> were
ddl -> dll
NIF's -> NIFs
OS-dependant -> OS-dependent
|
|
|
|
Also made the SEEALSO link at the bottom of erl_nif.xml more "erlangish".
|
|
Added erlang:system_info(build_type) which makes it
easier to chose drivers, NIF libraries, etc based
on build type of the runtime system.
|
|
ArgumentList -> Args
|
|
* rickard/cpu-info/OTP-8765:
Initialize environment functionality after thread lib
Fix faulty assertions
Implement automatic detection of CPU topology on Windows
Make it possible to reread and update detected CPU information
|
|
The CPU topology is now automatically detected on Windows
systems with less than 33 logical processors. The runtime system
will now, also on Windows, by default bind schedulers to logical
processors using the 'default_bind' bind type if the amount of
schedulers is at least equal to the amount of logical processors
configured, binding of schedulers is supported, and a CPU topology
is available at startup.
|
|
* bjorn/remove-elib_malloc/OTP-8764:
erts: Remove broken elib_malloc
erts: Remove the unused mem_drv driver
erts: Remove stray pre-ISO-C compatibility macros
erts: Remove unused decl.h
|
|
Calling erlang:system_info/1 with the new argument 'update_cpu_info'
will make the runtime system reread and update the internally stored
CPU information. For more information see the documentation of
erlang:system_info(update_cpu_info).
|
|
elib_malloc is an alternate memory allocator that
is no longer possible to build.
|
|
|
|
|
|
* pan/otp_8669_doc_autoimported:
Change documentation for erlang:min/2,max/2 and port_command/3 to
OTP-8669 erlang:min, erlang:max and erlang:port_command/3 autoimported
The recently added BIFs erlang:min/2, erlang:max/2 and
erlang:port_command/3 are now auto-imported (as they were originally
intended to be). Due to the recent compiler change (OTP-8579), the only
impact on old code defining it's own min/2, max/2 or port_command/3
functions will be a warning, the local functions will still be used. The
warning can be removed by using
-compile({no_auto_import,[min/2,max/2,port_command/3]}). in the source
file.
|
|
* commit 'bg/nif_error':
crypto: Add type specs for all documented functions
crypto: Use erlang:nif_error/1 to squelch false Dialyzer warnings
Add erlang:nif_error/1,2
|
|
reflect auto-import
|
|
Documented call time breakpoints in
- erlang:trace_pattern/3
- erlang:trace_info/2
|
|
The runtime system will by default bind schedulers to logical processors
using the default_bind bind type if the amount of schedulers are at least
equal to the amount of logical processors configured, binding of schedulers
is supported, and a CPU topology is available at startup.
NOTE: If the Erlang runtime system is the only operating system process
that binds threads to logical processors, this improves the performance of
the runtime system. However, if other operating system processes (as for
example another Erlang runtime system) also bind threads to logical
processors, there might be a performance penalty instead. If this is the
case you, are are advised to unbind the schedulers using the <seealso
marker="erl#+sbt">+sbtu</seealso> command line argument, or by invoking
<seealso
marker="erlang#system_flag_scheduler_bind_type">erlang:system_flag(schedule
r_bind_type, unbound)</seealso>.
|
|
A stub function that is supposed to be replaced by a NIF usually
calls erlang:error/1 to cause an exception if the NIF library
is not loaded. For example:
foo() ->
erlang:error(nif_not_loaded).
The problem is that although erlang:error/1 will normally never be
called, Dialyzer will think that any call to the function will fail
and thus generate false warnings. Adding a spec for the function
will not help because Dialyzer will not believe the spec.
Add erlang:nif_error/1,2 that work exactly like erlang:error/1,2.
Define the return types for both BIFs to be t_any().
erlang:nif_error is used like this:
-spec foo() -> binary().
foo() ->
erlang:nif_error(nif_not_loaded).
(The -spec is optional but highly recommended, since Dialyzer
otherwise has no chance to figure out the types.)
|
|
While binary_to_term/2 was added in R13B04, it wasn't auto-imported. This
conformed to longstanding policy of not changing auto-imports between major
versions. This patch contains changes to auto-import binary_to_term/2 to
coincide with the release of R14.
|
|
Signed-off-by: Tuncer Ayaz <[email protected]>
|
|
Correct behaviour of copy/2 witn 0 copies.
|
|
"Lose" means not "not win", but "loose" means "not tight".
Change "loose" to "lose" where appropriate.
|
|
* pan/otp_8332_halfword:
Teach testcase in driver_suite the new prototype for driver_async
wx: Correct usage of driver callbacks from wx thread
Adopt the new (R13B04) Nif functionality to the halfword codebase
Support monitoring and demonitoring from driver threads
Fix further test-suite problems
Correct the VM to work for more test suites
Teach {wordsize,internal|external} to system_info/1
Make tracing and distribution work
Turn on instruction packing in the loader and virtual machine
Add the BeamInstr data type for loaded BEAM code
Fix the BEAM dissambler for the half-word emulator
Store pointers to heap data in 32-bit words
Add a custom mmap wrapper to force heaps into the lower address range
Fit all heap data into the 32-bit address range
|
|
The documentation (*.xml) in the otp tree has a common grammatical
problem, "it's" and "its" are often interchanged. That is annoying
for some readers.
This commit consists entirely of "it's" -> "its" changes. I went
through every .xml file in the tree. If there are any remaining
bugs of this type, it's because I missed them, not because I
didn't look.
|
|
Some test suites need to differentiate between 32-bit terms
and 32-bit pointers.
While at it, remove some more warnings in process.c for SMP and debug.
|
|
|
|
* bd/doc-fixes:
Fix minor documentation errors
|
|
|
|
Fix three minor typos and reorder one of a pair of lists of functions so that
the ordering is consistent.
|
|
environment after a number of bugs are fixed and some features
are added in the documentation build process.
- The arity calculation is updated.
- The module prefix used in the function names for bif's are
removed in the generated links so the links will look like
http://www.erlang.org/doc/man/erlang.html#append_element-2
instead of
http://www.erlang.org/doc/man/erlang.html#erlang:append_element-2
- Enhanced the menu positioning in the html documentation when a
new page is loaded.
- A number of corrections in the generation of man pages (thanks
to Sergei Golovan)
- Moved some man pages to more apropriate sections, pages in
section 4 moved to 5 and pages in 6 moved to 7.
- The legal notice is taken from the xml book file so OTP's
build process can be used for non OTP applications.
|
|
Documentation of min_heap_size and min_bin_vheap size for:
* spawn_opt/2, spawn_opt/3, spawn_opt/4, spawn_opt/5
* erlang:system_flag/2
* erlang:system_info/1
* process_flag/2
* process_info/2
* erlang:trace/3
Documentation for the new beam start arguments:
+hms Size, Default minimum heap size for processes.
+hmbs Size, Default minimum binary virtual heap size.
|
|
* jv/binary_to_term-opts:
document ErtsExternalDist flags and CON_ID mask
add options to binary_to_term
OTP-8367 There is new erlang:binary_to_binary/2 BIF that takes an option
list. The option safe can be used to prevent creation of
resources that are not garbage collected (such as atoms). (Thanks
to Jayson Vantuyl.)
|
|
term_to_binary and binary_to_term are powerful tools that can be used easily in
lieu of a custom binary network protocol. Unfortunately, carefully crafted
data can be used to exhaust the memory in an Erlang node by merely attempting
to decode binaries. This makes it unsafe to receive data from untrusted
sources.
This is possible because binary_to_term/1 will allocate new atoms and new
external function references. These data structures are not garbage collected.
This patch implements the new form of binary_to_term that takes a list of
options, and a simple option called 'safe'. If specified, this option will
cause decoding to fail with a badarg error if an atom or external function
reference would be allocated.
In the general case, it will happily decode any Erlang term other than those
containing new atoms or new external function references. However, fun, pid,
and ref data types can embed atoms. They might fail to decode if one of these
embedded atoms is new to the node. This may be an issue if encoded binaries
are transferred between nodes or persisted between invocations of Erlang.
|
