aboutsummaryrefslogtreecommitdiffstats
path: root/erts/emulator/Makefile.in
AgeCommit message (Collapse)Author
2016-05-10Remove conditional dirty schedulers APIRickard Green
2016-04-15erts: Implement tracer modulesLukas Larsson
Add the possibility to use modules as trace data receivers. The functions in the module have to be nifs as otherwise complex trace probes will be very hard to handle (complex means trace probes for ports for example). This commit changes the way that the ptab->tracer field works from always being an immediate, to now be NIL if no tracer is present or else be the tuple {TracerModule, TracerState} where TracerModule is an atom that is later used to lookup the appropriate tracer callbacks to call and TracerState is just passed to the tracer callback. The default process and port tracers have been rewritten to use the new API. This commit also changes the order which trace messages are delivered to the potential tracer process. Any enif_send done in a tracer module may be delayed indefinitely because of lock order issues. If a message is delayed any other trace message send from that process is also delayed so that order is preserved for each traced entity. This means that for some trace events (i.e. send/receive) the events may come in an unintuitive order (receive before send) to the trace receiver. Timestamps are taken when the trace message is generated so trace messages from differented processes may arrive with the timestamp out of order. Both the erlang:trace and seq_trace:set_system_tracer accept the new tracer module tracers and also the backwards compatible arguments. OTP-10267
2016-04-13Merge branch 'henrik/update-copyrightyear'Henrik Nord
* henrik/update-copyrightyear: update copyright-year
2016-04-06erts: Teach lttng to configure and build systemBjörn-Egil Dahlberg
Introduce a wrapper API for lttng.
2016-03-15update copyright-yearHenrik Nord
2016-02-02erts: Add microstate accountingLukas Larsson
Microstate accounting is a way to track which state the different threads within ERTS are in. The main usage area is to pin point performance bottlenecks by checking which states the threads are in and then from there figuring out why and where to optimize. Since checking whether microstate accounting is on or off is relatively expensive if done in a short loop only a few of the states are enabled by default and more states can be enabled through configure. I've done some benchmarking and the overhead with it turned off is not noticible and with it on it is a fraction of a percent. If you enable the extra states, depending on the benchmark, the ovehead when turned off is about 1% and when turned on somewhere inbetween 5-15%. OTP-12345
2016-01-13erts: Introduce erts_code_purgerSverker Eriksson
as a system process with preloaded code.
2015-12-15erts: Move os_pid to port hash to child setupLukas Larsson
Had to move the hashing because of a race that can otherwise happen where a new os_pid value was inserted into the hash before the previous value had been removed. Also replaced the protocol inbetween erts and child setup to be a binary protocol. This was done in order to deal with the varying size of Eterm.
2015-12-15erts: Create forker process for spawn driverLukas Larsson
Instead of forking from the beam process, we create a separate process in which all forks are done. This has several advantages: 1) performance: * don't have to close all fd's in the world * fork only has to copy stuff from a small process * work is done in a completely seperate process * a 3x performance increase has been measured, can be made even greater (10x) if we cache the environment in child setup 2) stability * the exec is done in another process than beam, which means that if the file that we exec to is on an nfs that is not available right now we will not block a scheduler until the nfs returns. 3) simplicity * don't have to deal with SIGCHLD in the erts Unfortunately, this solution also implies some badness. 1) There will always be a seperate process running together with beam on unix. This could be confusing and undesirable. 2) We have to transfer the entire environment to child_setup for each command. OTP-13088
2015-12-15erts: Move sys drivers to another fileLukas Larsson
2015-12-15erts: Change name of child_setup to erl_child_setupLukas Larsson
2015-07-10ose: Remove all code related to the OSE portLukas Larsson
The OSE port is no longer supported and this commit removed it and any changes related to it. The things that were general improvements have been left in the code.
2015-06-18Change license text to APLv2Bruce Yinhe
2015-05-08Optimized timer implementationRickard Green
2015-03-24Merge branch 'rickard/time_api/OTP-11997'Rickard Green
* rickard/time_api/OTP-11997: Better OS system time implementation Documentation adjustments Fix zero timout timers erts_sys_hrtime() for lcnt Better support for poor os monotonic sources Conflicts: erts/preloaded/ebin/erlang.beam
2015-03-23Better support for poor os monotonic sourcesRickard Green
2015-03-20Merge branch 'rickard/time_api/OTP-11997'Rickard Green
* rickard/time_api/OTP-11997: (22 commits) Update primary bootstrap inets: Suppress deprecated warning on erlang:now/0 inets: Cleanup of multiple copies of functions Add inets_lib with common functions used by multiple modules inets: Update comments Suppress deprecated warning on erlang:now/0 Use new time API and be back-compatible in inets Remove unused functions and removed redundant test asn1 test SUITE: Eliminate use of now/0 Disable deprecated warning on erlang:now/0 in diameter_lib Use new time API and be back-compatible in ssh Replace all calls to now/0 in CT with new time API functions test_server: Replace usage of erlang:now() with usage of new API Replace usage of erlang:now() with usage of new API Replace usage of erlang:now() with usage of new API Replace usage of erlang:now() with usage of new API Replace usage of erlang:now() with usage of new API otp_SUITE: Warn for calls to erlang:now/0 Replace usage of erlang:now() with usage of new API Multiple timer wheels Erlang based BIF timer implementation for scalability Implement ethread events with timeout ... Conflicts: bootstrap/bin/start.boot bootstrap/bin/start_clean.boot bootstrap/lib/compiler/ebin/beam_asm.beam bootstrap/lib/compiler/ebin/compile.beam bootstrap/lib/kernel/ebin/auth.beam bootstrap/lib/kernel/ebin/dist_util.beam bootstrap/lib/kernel/ebin/global.beam bootstrap/lib/kernel/ebin/hipe_unified_loader.beam bootstrap/lib/kernel/ebin/inet_db.beam bootstrap/lib/kernel/ebin/inet_dns.beam bootstrap/lib/kernel/ebin/inet_res.beam bootstrap/lib/kernel/ebin/os.beam bootstrap/lib/kernel/ebin/pg2.beam bootstrap/lib/stdlib/ebin/dets.beam bootstrap/lib/stdlib/ebin/dets_utils.beam bootstrap/lib/stdlib/ebin/erl_tar.beam bootstrap/lib/stdlib/ebin/escript.beam bootstrap/lib/stdlib/ebin/file_sorter.beam bootstrap/lib/stdlib/ebin/otp_internal.beam bootstrap/lib/stdlib/ebin/qlc.beam bootstrap/lib/stdlib/ebin/random.beam bootstrap/lib/stdlib/ebin/supervisor.beam bootstrap/lib/stdlib/ebin/timer.beam erts/aclocal.m4 erts/emulator/beam/bif.c erts/emulator/beam/erl_bif_info.c erts/emulator/beam/erl_db_hash.c erts/emulator/beam/erl_init.c erts/emulator/beam/erl_process.h erts/emulator/beam/erl_thr_progress.c erts/emulator/beam/utils.c erts/emulator/sys/unix/sys.c erts/preloaded/ebin/erlang.beam erts/preloaded/ebin/erts_internal.beam erts/preloaded/ebin/init.beam erts/preloaded/src/erts_internal.erl lib/common_test/test/ct_hooks_SUITE_data/cth/tests/empty_cth.erl lib/diameter/src/base/diameter_lib.erl lib/kernel/src/os.erl lib/ssh/test/ssh_basic_SUITE.erl system/doc/efficiency_guide/advanced.xml
2015-03-20Introduce a new time APIRickard Green
The old time API is based on erlang:now/0. The major issue with erlang:now/0 is that it was intended to be used for so many unrelated things. This tied these unrelated operations together and unnecessarily caused performance, scalability as well as accuracy, and precision issues for operations that do not need to have such issues. The new API spreads different functionality over multiple functions in order to improve on this. The new API consists of a number of new BIFs: - erlang:convert_time_unit/3 - erlang:monotonic_time/0 - erlang:monotonic_time/1 - erlang:system_time/0 - erlang:system_time/1 - erlang:time_offset/0 - erlang:time_offset/1 - erlang:timestamp/0 - erlang:unique_integer/0 - erlang:unique_integer/1 - os:system_time/0 - os:system_time/1 and a number of extensions of existing BIFs: - erlang:monitor(time_offset, clock_service) - erlang:system_flag(time_offset, finalize) - erlang:system_info(os_monotonic_time_source) - erlang:system_info(time_offset) - erlang:system_info(time_warp_mode) - erlang:system_info(time_correction) - erlang:system_info(start_time) See the "Time and Time Correction in Erlang" chapter of the ERTS User's Guide for more information.
2015-02-19remove perfctr supportMikael Pettersson
Perfctr is a Linux kernel extension that allows programmatic access to the performance monitoring counters found in most current CPUs. However, development of perfctr ceased after 2010, and it cannot be used with Linux kernels newer than 2.6.32. Therefore the perfctr support code in the Erlang VM is effectively dead code, so this patch removes it.
2014-12-04erts: Start compilation of beam_emu earlierLukas Larsson
2014-09-17erts: Add icount build type for opcode counterBjörn-Egil Dahlberg
Enables ERTS_OPCODE_COUNTER_SUPPORT.
2014-03-28Merge branch 'nox/remove-superfluous-echo'Björn-Egil Dahlberg
* nox/remove-superfluous-echo: Remove a superfluous echo in the emulator Makefile
2014-03-27Merge branch 'lukas/ose/master-17.0/OTP-11334'Lukas Larsson
* lukas/ose/master-17.0/OTP-11334: ose: Fix erts assert failed printouts ose: fix for packet_bytes in fd/spawn driver. ose: Prepare slave for running on OSE ose: Fix bug when hunting for signal proxy ose: Implement tcp inet driver for OSE ose: Add ifdefs for HAVE_UDP ose: Yielding has to be done differently for background processes. ose: Print faults in aio sys driver calls ose: Prinout errno when to_erl read fails ose: erlang display goes to ramlog printf ose: Initiate stdin/stdout/stderr ose: Break lmconf into one per load module ose: Reset busy port when pdq empty ose: Restore the owner of the signal
2014-03-26ose: Break lmconf into one per load moduleLukas Larsson
2014-03-21Raspberry PI / Android a minimal cross-compile configurationDmitry Kolesnikov
Enable a cross compile Erlang/OTP platform to Android or Raspberry PI using Android NDK. Port emulator and core application to support target HW platform. Exclude any add-on services required for OTP platform deployment into target hardware due to device fragmentation and jail-break requirements. * fix erts/emulator/beam/sys.h Disable redefinition of __noreturn macro * port erts/emulator/sys/unix/erl_child_setup.c Use techniques proposed by https://code.google.com/p/erlang4android to access system properties * fix erts/emulator/sys/unix/erl_unix_sys_ddll.c The static linking of emulator cannot find dlerror(), dlopen() symbols * port erts/emulator/sys/unix/sys.c make path to shell configurable at build time * port erts/etc/common/Makefile.in disable librt for *-linux-androideabi * port erts/lib_src/pthread/ethread.c Use techniques proposed by https://code.google.com/p/erlang4android to disable emulator crash if kernel threads are on. Replace unreliable pthread_sigmask() by sigprocmask() * port lib/erl_interface/src/connect/ei_connect.c Disable call to undefined gethostid() * port lib/erl_interface/src/connect/ei_resolve.c Use gethostbyname_r() on Android platform
2014-03-18Merge branch 'lukas/erts/make_deps_fixes/OTP-11784'Lukas Larsson
* lukas/erts/make_deps_fixes/OTP-11784: erts: Fix resolve of generated files for depend erts: Move compiler flags generation
2014-03-09Remove a superfluous echo in the emulator MakefileAnthony Ramine
It pollutes the output of silent rules.
2014-02-24Merge branch 'lukas/ose/master/OTP-11334'Lukas Larsson
* lukas/ose/master/OTP-11334: (71 commits) erts: Fix unix efile assert ose: Use -O2 when building ose: Expand OSE docs ose: Add dummy ttsl driver ose: Cleanup cleanup of mutex selection defines ose: Polish mmap configure checks ose: Add ose specific x-compile flags ose: Updating fd_driver and spawn_driver for OSE ose: Updating event and signal API for OSE ose: Cleanup of mutex selection defines win32: Compile erl_log.exe ose: Remove uneccesary define ose: Fix ssl configure test for osx erts: Fix sys_msg_dispatcher assert ose: Fix broken doc links ose: Thread priorities configurable from lmconf ose: Yielding the cpu is done "the OSE" way ose: Start using ppdata for tse key ose: Do not use spinlocks on OSE ose: Fix support for crypto ... Conflicts: lib/crypto/c_src/crypto.c
2014-02-24ose: Add dummy ttsl driverLukas Larsson
2014-02-24ose: Fix clearmake compat issueLukas Larsson
2014-02-24ose: Fix various build environment issuesLukas Larsson
2014-02-24ose: Add module that allows interaction with any OSE processLukas Larsson
The interface of this module is made to be as generic as possible in order for other IPC mechanisms to mimic it and allow porting of code between different os:es.
2014-02-24Added support for ENEA OSELukas Larsson
This port has support for both non-smp and smp. It contains a new way to do io checking in which erts_poll_wait receives the payload of the polled entity. This has implications for all linked-in drivers.
2014-02-21Merge branch 'rickard/otp_version/OTP-11615'Rickard Green
* rickard/otp_version/OTP-11615: Misc adjustments of OTP version
2014-02-19Misc adjustments of OTP versionRickard Green
2014-02-06erts: Fix dtrace generation on FreeBSDLukas Larsson
2014-01-29Merge branch 'egil/maps/OTP-11616'Björn-Egil Dahlberg
* egil/maps/OTP-11616: (112 commits) compiler: Add core compile test for maps compiler: Fix core parse for Maps compiler: Fixup #map_pair{} spec erts: Strengthen map_SUITE tests erts: Update maps_fold test to respect maps:fold/3 stdlib: Make maps:fold/3 order-independent erts: Fixup enif_make_map_put on windows erts: Update preloaded erts_internal.beam hipe: Fixup update cerl pretty printer erts: Add map construction to driver API dialyzer: Add maps tests dialyzer: Remove dead code dialyzer: Reflect map_pair core changes in dialyzer hipe: Update cerl pretty printer compiler: Update inliner tests compiler: Squash #c_map_pair_*{} to #c_map_pair{} compiler: Squash #k_map_pair_*{} to #k_map_pair{} preloaded: Fixup export cmp_term in erts_internal erts: Change 'size' argument of enif_get_map_size from int* to size_t* erts: Fix compile error for halfword emulator ...
2014-01-28Merge branch 'motiejus/tile_mde3/OTP-11635'Lukas Larsson
* motiejus/tile_mde3/OTP-11635: Undefined MALLOC_USE_HASH macro on TileMDE3 Cross-compilation fix for TileraMDE-3.0.1.125620
2014-01-28erts: Initial Map instructions, type and structureBjörn-Egil Dahlberg
2014-01-09Fix issues with new versioningRickard Green
2013-12-15Cross-compilation fix for TileraMDE-3.0.1.125620Motiejus Jakštys
-OPT:Olimit=0 -WOPT:lpre=off:spre=off:epre=off tile-gcc 4.4.3 does not accept these options: cc1: error: unrecognized command line option "-WOPT:lpre=off:spre=off:epre=off"
2013-11-01erts: Fix resolve of generated files for dependLukas Larsson
2013-11-01erts: Move compiler flags generationLukas Larsson
Move the call to utils/make_compiler_flags to after _create_dirs to make sure that the dirs are created before we try to generate files in there. This seems to work with parallel make as well, but I cannot find any documentation that says that it should or should not work.
2013-10-15Merge branch 'maint'Sverker Eriksson
Conflicts: erts/preloaded/ebin/erlang.beam
2013-09-30erts: Prepare erl_mmap with tree structures for free seg storageSverker Eriksson
2013-08-21erts: Add support for static linked-in driversLukas Larsson
None of the OTP linked-in driver are supported
2013-08-21erts: Add option to include nifs staticallyLukas Larsson
Both crypto and asn1 are supported.
2013-07-11erts: Add cflags, ldflags and config.h into executableLukas Larsson
2013-05-28Fix receive support in erl_eval with a BEAM moduleAnthony Ramine
Using the low-level BEAM instructions, we can loop over each message in the process queue and removes the first message that matches, without receiving them all to later send them back to itself. The function prim_eval:'receive'/2 is equivalent to the following pseudo-code: 'receive'(F, T) -> RESET MESSAGE QUEUE POINTER, LOOP: case PEEK CURRENT MESSAGE WITH TIMEOUT T of {ok,Msg} -> case F(Msg) of nomatch -> DECREMENT TIMEOUT T, ADVANCE MESSAGE QUEUE POINTER, GOTO LOOP; Result -> RESET MESSAGE QUEUE POINTER, Result end; timeout -> RESET MESSAGE QUEUE POINTER, timeout end. To not break Dialyzer and other tools, we use a stub Erlang module which abstract code is forcefully inserted into prim_inet.erl afterwards compilation.
2013-05-24Merge branch 'nox/fix-silent-rules/OTP-11111' into maintFredrik Gustafsson
* nox/fix-silent-rules/OTP-11111: Fix some Makefile rules that didn't support silent rules