| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Add the possibility to use modules as trace data receivers. The functions
in the module have to be nifs as otherwise complex trace probes will be
very hard to handle (complex means trace probes for ports for example).
This commit changes the way that the ptab->tracer field works from always
being an immediate, to now be NIL if no tracer is present or else be
the tuple {TracerModule, TracerState} where TracerModule is an atom that
is later used to lookup the appropriate tracer callbacks to call and
TracerState is just passed to the tracer callback. The default process and
port tracers have been rewritten to use the new API.
This commit also changes the order which trace messages are delivered to the
potential tracer process. Any enif_send done in a tracer module may be delayed
indefinitely because of lock order issues. If a message is delayed any other
trace message send from that process is also delayed so that order is preserved
for each traced entity. This means that for some trace events (i.e. send/receive)
the events may come in an unintuitive order (receive before send) to the
trace receiver. Timestamps are taken when the trace message is generated so
trace messages from differented processes may arrive with the timestamp
out of order.
Both the erlang:trace and seq_trace:set_system_tracer accept the new tracer
module tracers and also the backwards compatible arguments.
OTP-10267
|
|
* henrik/update-copyrightyear:
update copyright-year
|
|
Introduce a wrapper API for lttng.
|
|
|
|
Microstate accounting is a way to track which state the
different threads within ERTS are in. The main usage area
is to pin point performance bottlenecks by checking which
states the threads are in and then from there figuring out
why and where to optimize.
Since checking whether microstate accounting is on or off is
relatively expensive if done in a short loop only a few of the
states are enabled by default and more states can be enabled
through configure.
I've done some benchmarking and the overhead with it turned off
is not noticible and with it on it is a fraction of a percent.
If you enable the extra states, depending on the benchmark,
the ovehead when turned off is about 1% and when turned on
somewhere inbetween 5-15%.
OTP-12345
|
|
as a system process with preloaded code.
|
|
Had to move the hashing because of a race that can otherwise happen
where a new os_pid value was inserted into the hash before the
previous value had been removed.
Also replaced the protocol inbetween erts and child setup to be
a binary protocol. This was done in order to deal with the varying
size of Eterm.
|
|
Instead of forking from the beam process, we create a separate
process in which all forks are done. This has several advantages:
1) performance:
* don't have to close all fd's in the world
* fork only has to copy stuff from a small process
* work is done in a completely seperate process
* a 3x performance increase has been measured,
can be made even greater (10x) if we cache the
environment in child setup
2) stability
* the exec is done in another process than beam, which means that
if the file that we exec to is on an nfs that is not available
right now we will not block a scheduler until the nfs returns.
3) simplicity
* don't have to deal with SIGCHLD in the erts
Unfortunately, this solution also implies some badness.
1) There will always be a seperate process running together with
beam on unix. This could be confusing and undesirable.
2) We have to transfer the entire environment to child_setup
for each command.
OTP-13088
|
|
|
|
|
|
The OSE port is no longer supported and this commit removed it
and any changes related to it. The things that were general
improvements have been left in the code.
|
|
|
|
|
|
* rickard/time_api/OTP-11997:
Better OS system time implementation
Documentation adjustments
Fix zero timout timers
erts_sys_hrtime() for lcnt
Better support for poor os monotonic sources
Conflicts:
erts/preloaded/ebin/erlang.beam
|
|
|
|
* rickard/time_api/OTP-11997: (22 commits)
Update primary bootstrap
inets: Suppress deprecated warning on erlang:now/0
inets: Cleanup of multiple copies of functions Add inets_lib with common functions used by multiple modules
inets: Update comments
Suppress deprecated warning on erlang:now/0
Use new time API and be back-compatible in inets Remove unused functions and removed redundant test
asn1 test SUITE: Eliminate use of now/0
Disable deprecated warning on erlang:now/0 in diameter_lib
Use new time API and be back-compatible in ssh
Replace all calls to now/0 in CT with new time API functions
test_server: Replace usage of erlang:now() with usage of new API
Replace usage of erlang:now() with usage of new API
Replace usage of erlang:now() with usage of new API
Replace usage of erlang:now() with usage of new API
Replace usage of erlang:now() with usage of new API
otp_SUITE: Warn for calls to erlang:now/0
Replace usage of erlang:now() with usage of new API
Multiple timer wheels
Erlang based BIF timer implementation for scalability
Implement ethread events with timeout
...
Conflicts:
bootstrap/bin/start.boot
bootstrap/bin/start_clean.boot
bootstrap/lib/compiler/ebin/beam_asm.beam
bootstrap/lib/compiler/ebin/compile.beam
bootstrap/lib/kernel/ebin/auth.beam
bootstrap/lib/kernel/ebin/dist_util.beam
bootstrap/lib/kernel/ebin/global.beam
bootstrap/lib/kernel/ebin/hipe_unified_loader.beam
bootstrap/lib/kernel/ebin/inet_db.beam
bootstrap/lib/kernel/ebin/inet_dns.beam
bootstrap/lib/kernel/ebin/inet_res.beam
bootstrap/lib/kernel/ebin/os.beam
bootstrap/lib/kernel/ebin/pg2.beam
bootstrap/lib/stdlib/ebin/dets.beam
bootstrap/lib/stdlib/ebin/dets_utils.beam
bootstrap/lib/stdlib/ebin/erl_tar.beam
bootstrap/lib/stdlib/ebin/escript.beam
bootstrap/lib/stdlib/ebin/file_sorter.beam
bootstrap/lib/stdlib/ebin/otp_internal.beam
bootstrap/lib/stdlib/ebin/qlc.beam
bootstrap/lib/stdlib/ebin/random.beam
bootstrap/lib/stdlib/ebin/supervisor.beam
bootstrap/lib/stdlib/ebin/timer.beam
erts/aclocal.m4
erts/emulator/beam/bif.c
erts/emulator/beam/erl_bif_info.c
erts/emulator/beam/erl_db_hash.c
erts/emulator/beam/erl_init.c
erts/emulator/beam/erl_process.h
erts/emulator/beam/erl_thr_progress.c
erts/emulator/beam/utils.c
erts/emulator/sys/unix/sys.c
erts/preloaded/ebin/erlang.beam
erts/preloaded/ebin/erts_internal.beam
erts/preloaded/ebin/init.beam
erts/preloaded/src/erts_internal.erl
lib/common_test/test/ct_hooks_SUITE_data/cth/tests/empty_cth.erl
lib/diameter/src/base/diameter_lib.erl
lib/kernel/src/os.erl
lib/ssh/test/ssh_basic_SUITE.erl
system/doc/efficiency_guide/advanced.xml
|
|
The old time API is based on erlang:now/0. The major issue with
erlang:now/0 is that it was intended to be used for so many
unrelated things. This tied these unrelated operations together
and unnecessarily caused performance, scalability as well as
accuracy, and precision issues for operations that do not need
to have such issues. The new API spreads different functionality
over multiple functions in order to improve on this.
The new API consists of a number of new BIFs:
- erlang:convert_time_unit/3
- erlang:monotonic_time/0
- erlang:monotonic_time/1
- erlang:system_time/0
- erlang:system_time/1
- erlang:time_offset/0
- erlang:time_offset/1
- erlang:timestamp/0
- erlang:unique_integer/0
- erlang:unique_integer/1
- os:system_time/0
- os:system_time/1
and a number of extensions of existing BIFs:
- erlang:monitor(time_offset, clock_service)
- erlang:system_flag(time_offset, finalize)
- erlang:system_info(os_monotonic_time_source)
- erlang:system_info(time_offset)
- erlang:system_info(time_warp_mode)
- erlang:system_info(time_correction)
- erlang:system_info(start_time)
See the "Time and Time Correction in Erlang" chapter of the
ERTS User's Guide for more information.
|
|
Perfctr is a Linux kernel extension that allows programmatic access
to the performance monitoring counters found in most current CPUs.
However, development of perfctr ceased after 2010, and it cannot be
used with Linux kernels newer than 2.6.32.
Therefore the perfctr support code in the Erlang VM is effectively
dead code, so this patch removes it.
|
|
|
|
Enables ERTS_OPCODE_COUNTER_SUPPORT.
|
|
* nox/remove-superfluous-echo:
Remove a superfluous echo in the emulator Makefile
|
|
* lukas/ose/master-17.0/OTP-11334:
ose: Fix erts assert failed printouts
ose: fix for packet_bytes in fd/spawn driver.
ose: Prepare slave for running on OSE
ose: Fix bug when hunting for signal proxy
ose: Implement tcp inet driver for OSE
ose: Add ifdefs for HAVE_UDP
ose: Yielding has to be done differently for background processes.
ose: Print faults in aio sys driver calls
ose: Prinout errno when to_erl read fails
ose: erlang display goes to ramlog printf
ose: Initiate stdin/stdout/stderr
ose: Break lmconf into one per load module
ose: Reset busy port when pdq empty
ose: Restore the owner of the signal
|
|
|
|
Enable a cross compile Erlang/OTP platform to Android or Raspberry PI
using Android NDK. Port emulator and core application to support target
HW platform. Exclude any add-on services required for OTP platform deployment
into target hardware due to device fragmentation and jail-break requirements.
* fix erts/emulator/beam/sys.h
Disable redefinition of __noreturn macro
* port erts/emulator/sys/unix/erl_child_setup.c
Use techniques proposed by https://code.google.com/p/erlang4android to
access system properties
* fix erts/emulator/sys/unix/erl_unix_sys_ddll.c
The static linking of emulator cannot find dlerror(), dlopen() symbols
* port erts/emulator/sys/unix/sys.c
make path to shell configurable at build time
* port erts/etc/common/Makefile.in
disable librt for *-linux-androideabi
* port erts/lib_src/pthread/ethread.c
Use techniques proposed by https://code.google.com/p/erlang4android to
disable emulator crash if kernel threads are on. Replace unreliable
pthread_sigmask() by sigprocmask()
* port lib/erl_interface/src/connect/ei_connect.c
Disable call to undefined gethostid()
* port lib/erl_interface/src/connect/ei_resolve.c
Use gethostbyname_r() on Android platform
|
|
* lukas/erts/make_deps_fixes/OTP-11784:
erts: Fix resolve of generated files for depend
erts: Move compiler flags generation
|
|
It pollutes the output of silent rules.
|
|
* lukas/ose/master/OTP-11334: (71 commits)
erts: Fix unix efile assert
ose: Use -O2 when building
ose: Expand OSE docs
ose: Add dummy ttsl driver
ose: Cleanup cleanup of mutex selection defines
ose: Polish mmap configure checks
ose: Add ose specific x-compile flags
ose: Updating fd_driver and spawn_driver for OSE
ose: Updating event and signal API for OSE
ose: Cleanup of mutex selection defines
win32: Compile erl_log.exe
ose: Remove uneccesary define
ose: Fix ssl configure test for osx
erts: Fix sys_msg_dispatcher assert
ose: Fix broken doc links
ose: Thread priorities configurable from lmconf
ose: Yielding the cpu is done "the OSE" way
ose: Start using ppdata for tse key
ose: Do not use spinlocks on OSE
ose: Fix support for crypto
...
Conflicts:
lib/crypto/c_src/crypto.c
|
|
|
|
|
|
|
|
The interface of this module is made to be as generic as possible
in order for other IPC mechanisms to mimic it and allow porting of
code between different os:es.
|
|
This port has support for both non-smp and smp.
It contains a new way to do io checking in which erts_poll_wait
receives the payload of the polled entity. This has implications
for all linked-in drivers.
|
|
* rickard/otp_version/OTP-11615:
Misc adjustments of OTP version
|
|
|
|
|
|
* egil/maps/OTP-11616: (112 commits)
compiler: Add core compile test for maps
compiler: Fix core parse for Maps
compiler: Fixup #map_pair{} spec
erts: Strengthen map_SUITE tests
erts: Update maps_fold test to respect maps:fold/3
stdlib: Make maps:fold/3 order-independent
erts: Fixup enif_make_map_put on windows
erts: Update preloaded erts_internal.beam
hipe: Fixup update cerl pretty printer
erts: Add map construction to driver API
dialyzer: Add maps tests
dialyzer: Remove dead code
dialyzer: Reflect map_pair core changes in dialyzer
hipe: Update cerl pretty printer
compiler: Update inliner tests
compiler: Squash #c_map_pair_*{} to #c_map_pair{}
compiler: Squash #k_map_pair_*{} to #k_map_pair{}
preloaded: Fixup export cmp_term in erts_internal
erts: Change 'size' argument of enif_get_map_size from int* to size_t*
erts: Fix compile error for halfword emulator
...
|
|
* motiejus/tile_mde3/OTP-11635:
Undefined MALLOC_USE_HASH macro on TileMDE3
Cross-compilation fix for TileraMDE-3.0.1.125620
|
|
|
|
|
|
-OPT:Olimit=0 -WOPT:lpre=off:spre=off:epre=off
tile-gcc 4.4.3 does not accept these options:
cc1: error: unrecognized command line option
"-WOPT:lpre=off:spre=off:epre=off"
|
|
|
|
Move the call to utils/make_compiler_flags to after _create_dirs
to make sure that the dirs are created before we try to generate files
in there. This seems to work with parallel make as well, but I cannot
find any documentation that says that it should or should not work.
|
|
Conflicts:
erts/preloaded/ebin/erlang.beam
|
|
|
|
None of the OTP linked-in driver are supported
|
|
Both crypto and asn1 are supported.
|
|
|
|
Using the low-level BEAM instructions, we can loop over each message in
the process queue and removes the first message that matches, without
receiving them all to later send them back to itself.
The function prim_eval:'receive'/2 is equivalent to the
following pseudo-code:
'receive'(F, T) ->
RESET MESSAGE QUEUE POINTER,
LOOP:
case PEEK CURRENT MESSAGE WITH TIMEOUT T of
{ok,Msg} ->
case F(Msg) of
nomatch ->
DECREMENT TIMEOUT T,
ADVANCE MESSAGE QUEUE POINTER,
GOTO LOOP;
Result ->
RESET MESSAGE QUEUE POINTER,
Result
end;
timeout ->
RESET MESSAGE QUEUE POINTER,
timeout
end.
To not break Dialyzer and other tools, we use a stub Erlang module which
abstract code is forcefully inserted into prim_inet.erl afterwards
compilation.
|
|
* nox/fix-silent-rules/OTP-11111:
Fix some Makefile rules that didn't support silent rules
|
