| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Ensure that we cannot get any dangling pointers into code that
has been purged. This is done by a two phase purge. At first
phase all fun entries pointing into the code to purge are marked
for purge. All processes trying to call these funs will be suspended
and by this we avoid getting new direct references into the code.
When all processes has been checked, these processes are resumed.
The new purge strategy now also completely ignore the existence of
indirect references to the code (funs). If such exist, they will
cause bad fun exceptions to the caller, but will not prevent a
soft purge or cause a kill of a process having such live references
during a hard purge. This since it is impossible to give any
guarantees that no processes in the system have such indirect
references. Even when the system is completely clean from such
references, new ones can appear via distribution and/or disk.
|
|
|
|
* rickard/rm-mqd-mixed/OTP-13366:
Remove the 'message_queue_data' option 'mixed'
|
|
|
|
The extra trace data has been moved to the opts map in order
for the tracer to be able to distinguish inbetween extra
trace data 'undefined' and no extra trace data. In the same
commit all opts associations have been changed so that if
the tracer should not use them, the key is left unassicated
instead of being sent to undefined. This should be give a
small performance gain and also makes the API easier to work
with.
|
|
The max_heap_size process flag can be used to limit the
growth of a process heap by killing it before it becomes
too large to handle. It is possible to set the maximum
using the `erl +hmax` option, `system_flag(max_heap_size, ...)`,
`spawn_opt(Fun, [{max_heap_size, ...}])` and
`process_flag(max_heap_size, ...)`.
It is possible to configure the behaviour of the process
when the maximum heap size is reached. The process may be
sent an untrappable exit signal with reason kill and/or
send an error_logger message with details on the process
state. A new trace event called gc_max_heap_size is
also triggered for the garbage_collection trace flag
when the heap grows larger than the configured size.
If kill and error_logger are disabled, it is still
possible to see that the maximum has been reached by
doing garbage collection tracing on the process.
The heap size is defined as the sum of the heap memory
that the process is currently using. This includes
all generational heaps, the stack, any messages that
are considered to be part of the heap and any extra
memory the garbage collector may need during collection.
In the current implementation this means that when a process
is set using on_heap message queue data mode, the messages
that are in the internal message queue are counted towards
this value. For off_heap, only matched messages count towards
the size of the heap. For mixed, it depends on race conditions
within the VM whether a message is part of the heap or not.
Below is an example run of the new behaviour:
Eshell V8.0 (abort with ^G)
1> f(P),P = spawn_opt(fun() -> receive ok -> ok end end, [{max_heap_size, 512}]).
<0.60.0>
2> erlang:trace(P, true, [garbage_collection, procs]).
1
3> [P ! lists:duplicate(M,M) || M <- lists:seq(1,15)],ok.
ok
4>
=ERROR REPORT==== 26-Apr-2016::16:25:10 ===
Process: <0.60.0>
Context: maximum heap size reached
Max heap size: 512
Total heap size: 723
Kill: true
Error Logger: true
GC Info: [{old_heap_block_size,0},
{heap_block_size,609},
{mbuf_size,145},
{recent_size,0},
{stack_size,9},
{old_heap_size,0},
{heap_size,211},
{bin_vheap_size,0},
{bin_vheap_block_size,46422},
{bin_old_vheap_size,0},
{bin_old_vheap_block_size,46422}]
flush().
Shell got {trace,<0.60.0>,gc_start,
[{old_heap_block_size,0},
{heap_block_size,233},
{mbuf_size,145},
{recent_size,0},
{stack_size,9},
{old_heap_size,0},
{heap_size,211},
{bin_vheap_size,0},
{bin_vheap_block_size,46422},
{bin_old_vheap_size,0},
{bin_old_vheap_block_size,46422}]}
Shell got {trace,<0.60.0>,gc_max_heap_size,
[{old_heap_block_size,0},
{heap_block_size,609},
{mbuf_size,145},
{recent_size,0},
{stack_size,9},
{old_heap_size,0},
{heap_size,211},
{bin_vheap_size,0},
{bin_vheap_block_size,46422},
{bin_old_vheap_size,0},
{bin_old_vheap_block_size,46422}]}
Shell got {trace,<0.60.0>,exit,killed}
|
|
Replace 'gc_start' and 'gc_end' with
* 'gc_minor_start'
* 'gc_minor_end'
* 'gc_major_start'
* 'gc_major_end'
|
|
OTP-13497
This trace event is triggered when a process is created from the
process that is created.
|
|
This commit completes the tracing for processes so that
all messages sent by a process (via nifs or otherwise) will
be traced.
The commit also adds tracing of all types of events from ports.
When enabling tracing using erlang:trace, the 'all' flag now also
enables tracing on all ports.
OTP-13496
|
|
Add the possibility to use modules as trace data receivers. The functions
in the module have to be nifs as otherwise complex trace probes will be
very hard to handle (complex means trace probes for ports for example).
This commit changes the way that the ptab->tracer field works from always
being an immediate, to now be NIL if no tracer is present or else be
the tuple {TracerModule, TracerState} where TracerModule is an atom that
is later used to lookup the appropriate tracer callbacks to call and
TracerState is just passed to the tracer callback. The default process and
port tracers have been rewritten to use the new API.
This commit also changes the order which trace messages are delivered to the
potential tracer process. Any enif_send done in a tracer module may be delayed
indefinitely because of lock order issues. If a message is delayed any other
trace message send from that process is also delayed so that order is preserved
for each traced entity. This means that for some trace events (i.e. send/receive)
the events may come in an unintuitive order (receive before send) to the
trace receiver. Timestamps are taken when the trace message is generated so
trace messages from differented processes may arrive with the timestamp
out of order.
Both the erlang:trace and seq_trace:set_system_tracer accept the new tracer
module tracers and also the backwards compatible arguments.
OTP-10267
|
|
* henrik/update-copyrightyear:
update copyright-year
|
|
|
|
|
|
- The calling process is now suspended while synchronizing
scheduler suspends via erlang:system_flag(schedulers_online, _)
and erlang:system_flag(multi_scheduling, _), instead of blocking
the scheduler thread in the BIF call waiting for the operation
to synchronize. Besides releasing the scheduler for other work
(or immediate suspend) it also makes it possible to abort the
operation by killing the process.
- erlang:system_flag(schedulers_online, _) now only wait for normal
schedulers to complete before it returns. This since it may take
a very long time before all dirty schedulers suspends.
- erlang:system_flag(multi_scheduling, block_normal|unblock_normal)
which only operate on normal schedulers has been introduced. This
since there are use cases where suspend of dirty schedulers are
not of interest (hipe loader).
- erlang:system_flag(multi_scheduling, block) still blocks all
dirty schedulers as well as all normal schedulers except one since
it is hard to redefine what multi scheduling block means.
- The three operations:
- changing amount of schedulers online
- blocking/unblocking normal multi scheduling
- blocking/unblocking full multi scheduling
can now be done in parallel. This is important since otherwise
a full multi scheduling block would potentially delay the other
operations for a very long time.
|
|
* bjorn/multiple-load/OTP-13111:
code: Add functions that can load multiple modules
Refactor post_beam_load handling
Simplify and robustify code_server:all_loaded/1
Update preloaded modules
Add erl_prim_loader:get_modules/3
Add has_prepared_code_on_load/1 BIF
Allow erlang:finish_loading/1 to load more than one module
beam_load.c: Add a function to check for an on_load function
|
|
Conflicts:
erts/emulator/beam/erl_alloc.types
erts/emulator/beam/erl_bif_info.c
erts/emulator/beam/erl_process.c
erts/preloaded/ebin/erts_internal.beam
|
|
The BIFs prepare_loading/2 and finish_loading/1 have been
designed to allow fast loading in parallel of many modules.
Because of the complications with on_load functions,
the initial implementation of finish_loading/1 only allowed
a single element in the list of prepared modules.
finish_loading/1 does not suspend other processes, but it must wait
for all schedulers to pass a write barrier ("thread progress"). The
time for all schedulers to pass the write barrier is highly variable,
depending on what kind of code they are executing. Therefore, allowing
finish_loading/1 to finish the loading for more than one module before
passing the write barrier could potentially be much faster than
calling finish_loading/1 multiple times.
The test case many/1 run on my computer shows that with "heavy load",
finish loading of 100 modules in parallel is almost 50 times faster
than loading them sequentially. With "light load", the gain is still
almost 10 times.
Here follows an actual sample of the output from the test case on
my computer (an 2012 iMac):
Light load
==========
Sequential: 22361 µs
Parallel: 2586 µs
Ratio: 9
Heavy load
==========
Sequential: 254512 µs
Parallel: 5246 µs
Ratio: 49
|
|
This commit implements erts_internal:system_check(schedulers) with the
intent of a basic responsiveness test check of the schedulers.
|
|
Microstate accounting is a way to track which state the
different threads within ERTS are in. The main usage area
is to pin point performance bottlenecks by checking which
states the threads are in and then from there figuring out
why and where to optimize.
Since checking whether microstate accounting is on or off is
relatively expensive if done in a short loop only a few of the
states are enabled by default and more states can be enabled
through configure.
I've done some benchmarking and the overhead with it turned off
is not noticible and with it on it is a fraction of a percent.
If you enable the extra states, depending on the benchmark,
the ovehead when turned off is about 1% and when turned on
somewhere inbetween 5-15%.
OTP-12345
|
|
* maint:
Introduce time management in native APIs
Introduce time warp safe replacement for safe_fixed option
Introduce time warp safe trace timestamp formats
Conflicts:
erts/emulator/beam/erl_bif_trace.c
erts/emulator/beam/erl_driver.h
erts/emulator/beam/erl_nif.h
erts/emulator/beam/erl_trace.c
erts/preloaded/ebin/erlang.beam
|
|
* lukas/erts/gc_info/OTP-13265:
erts: Add garbage_collection_info to process_info/2
Conflicts:
erts/emulator/beam/erl_bif_info.c
|
|
New timestamp options for trace, sequential trace, and
system profile:
- monotonic_timestamp
- strict_monotonic_timestamp
|
|
* maint:
Light weight statistics of run queue lengths
Conflicts:
erts/preloaded/ebin/erlang.beam
|
|
- statistics(total_run_queue_lengths)
- statistics(run_queue_lengths)
- statistics(total_active_tasks)
- statistics(active_tasks)
Conflicts:
erts/emulator/beam/erl_process.c
|
|
* lukas/erts/forker: (28 commits)
erts: Never abort in the forked child
erts: Mend ASSERT makro for erl_child_setup
erts: Allow enomem failures in port_SUITE
erts: iter_port sleep longer on freebsd
erts: Allow one dangling fd if there is a gethost port
erts: Only use forker StackAck on freebsd
erts: It is not possible to exit the forker driver
erts: Add forker StartAck for port start flowcontrol
erts: Fix large open_port arg segfault for win32
erts: Fix memory leak at async open port
kernel: Remove cmd server for unix os:cmd
erts: Add testcase for huge port environment
erts: Move os_pid to port hash to child setup
erts: Handle all EINTR and EAGAIN cases in child setup
erts: Make child_setup work with large environments
erts: Fix forker driver ifdefs for win32
erts: Fix uds socket handling for os x
erts: Fix dereferencing of unaligned integer for sparc
erts: Flatten too long io vectors in uds write
erts: Add fd count test for spawn_driver
...
Conflicts:
erts/emulator/beam/erl_node_tables.c
erts/preloaded/src/erts_internal.erl
|
|
OTP-13086
|
|
The message_queue_data option can have the values
- off_heap
- on_heap
- mixed
|
|
This info request returns greater details about the current
gc state. This info is not included in the default process_info/1
as it would clutter the default printout with too much information.
|
|
* rickard/ohmq/OTP-13047:
Fragmented young heap generation and off_heap_message_queue option
Refactor GC
Introduce literal tag
Conflicts:
erts/doc/src/erlang.xml
erts/emulator/beam/erl_gc.c
|
|
* The youngest generation of the heap can now consist of multiple
blocks. Heap fragments and message fragments are added to the
youngest generation when needed without triggering a GC. After
a GC the youngest generation is contained in one single block.
* The off_heap_message_queue process flag has been added. When
enabled all message data in the queue is kept off heap. When
a message is selected from the queue, the message fragment (or
heap fragment) containing the actual message is attached to the
youngest generation. Messages stored off heap is not part of GC.
|
|
OTP-13082
* sverk/binary_split_bif:
erts: Minor refactor for binary find BIF backend
erts: Refactor BIF for binary:match,matches,split
erts: Refactor backend of binary:split
erts: Replace 0 with THE_NON_VALUE
stdlib: Add BIF option 'trim_all' to binary:split/3
stdlib: Add BIF binary:split/2 and binary:split/3
Conflicts:
bootstrap/lib/stdlib/ebin/binary.beam
|
|
with an common do_binary_find() used by match, matches and split.
|
|
|
|
|
|
A new {line_delimiter, byte()} option allows line-oriented TCP-based
protocols to use a custom line delimiting character. It is to be
used in conjunction with {packet, line}.
This option also works with erlang:decode_packet/3 when its first argument
is 'line'.
|
|
|
|
A new {line_delimiter, byte()} option allows line-oriented TCP-based protocols
to use a custom line delimiting character. It is to be used in conjunction
with {packet, line}.
This option also works with erlang:decode_packet/3 when its first argument
is 'line'.
|
|
The OSE port is no longer supported and this commit removed it
and any changes related to it. The things that were general
improvements have been left in the code.
|
|
|
|
|
|
|
|
* rickard/timer-optimization/OTP-12650:
Optimized timer implementation
Reusable red-black tree implementation
Conflicts:
erts/emulator/beam/erl_bif_timer.c
|
|
|
|
According to EEP-43 for maps, a 'badmap' exception should be
generated when an attempt is made to update non-map term such as:
<<>>#{a=>42}
That was not implemented in the OTP 17.
José Valim suggested that we should take the opportunity to
improve the errors coming from map operations:
http://erlang.org/pipermail/erlang-questions/2015-February/083588.html
This commit implement better errors from map operations similar
to his suggestion.
When a map update operation (Map#{...}) or a BIF that expects a map
is given a non-map term, the exception will be:
{badmap,Term}
This kind of exception is similar to the {badfun,Term} exception
from operations that expect a fun.
When a map operation requires a key that is not present in a map,
the following exception will be raised:
{badkey,Key}
José Valim suggested that the exception should be
{badkey,Key,Map}. We decided not to do that because the map
could potentially be huge and cause problems if the error
propagated through links to other processes.
For BIFs, it could be argued that the exceptions could be simply
'badmap' and 'badkey', because the bad map and bad key can be found in
the argument list for the BIF in the stack backtrace. However, for the
map update operation (Map#{...}), the bad map or bad key will not be
included in the stack backtrace, so that information must be included
in the exception reason itself. For consistency, the BIFs should raise
the same exceptions as update operation.
If more than one key is missing, it is undefined which of
keys that will be reported in the {badkey,Key} exception.
|
|
* rickard/time_api/OTP-11997: (22 commits)
Update primary bootstrap
inets: Suppress deprecated warning on erlang:now/0
inets: Cleanup of multiple copies of functions Add inets_lib with common functions used by multiple modules
inets: Update comments
Suppress deprecated warning on erlang:now/0
Use new time API and be back-compatible in inets Remove unused functions and removed redundant test
asn1 test SUITE: Eliminate use of now/0
Disable deprecated warning on erlang:now/0 in diameter_lib
Use new time API and be back-compatible in ssh
Replace all calls to now/0 in CT with new time API functions
test_server: Replace usage of erlang:now() with usage of new API
Replace usage of erlang:now() with usage of new API
Replace usage of erlang:now() with usage of new API
Replace usage of erlang:now() with usage of new API
Replace usage of erlang:now() with usage of new API
otp_SUITE: Warn for calls to erlang:now/0
Replace usage of erlang:now() with usage of new API
Multiple timer wheels
Erlang based BIF timer implementation for scalability
Implement ethread events with timeout
...
Conflicts:
bootstrap/bin/start.boot
bootstrap/bin/start_clean.boot
bootstrap/lib/compiler/ebin/beam_asm.beam
bootstrap/lib/compiler/ebin/compile.beam
bootstrap/lib/kernel/ebin/auth.beam
bootstrap/lib/kernel/ebin/dist_util.beam
bootstrap/lib/kernel/ebin/global.beam
bootstrap/lib/kernel/ebin/hipe_unified_loader.beam
bootstrap/lib/kernel/ebin/inet_db.beam
bootstrap/lib/kernel/ebin/inet_dns.beam
bootstrap/lib/kernel/ebin/inet_res.beam
bootstrap/lib/kernel/ebin/os.beam
bootstrap/lib/kernel/ebin/pg2.beam
bootstrap/lib/stdlib/ebin/dets.beam
bootstrap/lib/stdlib/ebin/dets_utils.beam
bootstrap/lib/stdlib/ebin/erl_tar.beam
bootstrap/lib/stdlib/ebin/escript.beam
bootstrap/lib/stdlib/ebin/file_sorter.beam
bootstrap/lib/stdlib/ebin/otp_internal.beam
bootstrap/lib/stdlib/ebin/qlc.beam
bootstrap/lib/stdlib/ebin/random.beam
bootstrap/lib/stdlib/ebin/supervisor.beam
bootstrap/lib/stdlib/ebin/timer.beam
erts/aclocal.m4
erts/emulator/beam/bif.c
erts/emulator/beam/erl_bif_info.c
erts/emulator/beam/erl_db_hash.c
erts/emulator/beam/erl_init.c
erts/emulator/beam/erl_process.h
erts/emulator/beam/erl_thr_progress.c
erts/emulator/beam/utils.c
erts/emulator/sys/unix/sys.c
erts/preloaded/ebin/erlang.beam
erts/preloaded/ebin/erts_internal.beam
erts/preloaded/ebin/init.beam
erts/preloaded/src/erts_internal.erl
lib/common_test/test/ct_hooks_SUITE_data/cth/tests/empty_cth.erl
lib/diameter/src/base/diameter_lib.erl
lib/kernel/src/os.erl
lib/ssh/test/ssh_basic_SUITE.erl
system/doc/efficiency_guide/advanced.xml
|
|
|
|
The old time API is based on erlang:now/0. The major issue with
erlang:now/0 is that it was intended to be used for so many
unrelated things. This tied these unrelated operations together
and unnecessarily caused performance, scalability as well as
accuracy, and precision issues for operations that do not need
to have such issues. The new API spreads different functionality
over multiple functions in order to improve on this.
The new API consists of a number of new BIFs:
- erlang:convert_time_unit/3
- erlang:monotonic_time/0
- erlang:monotonic_time/1
- erlang:system_time/0
- erlang:system_time/1
- erlang:time_offset/0
- erlang:time_offset/1
- erlang:timestamp/0
- erlang:unique_integer/0
- erlang:unique_integer/1
- os:system_time/0
- os:system_time/1
and a number of extensions of existing BIFs:
- erlang:monitor(time_offset, clock_service)
- erlang:system_flag(time_offset, finalize)
- erlang:system_info(os_monotonic_time_source)
- erlang:system_info(time_offset)
- erlang:system_info(time_warp_mode)
- erlang:system_info(time_correction)
- erlang:system_info(start_time)
See the "Time and Time Correction in Erlang" chapter of the
ERTS User's Guide for more information.
|
|
* sverk/yielding-distr-send/OTP-12232:
erts: Add constant TERM_TO_BINARY_MEMCPY_FACTOR
erts: Optimize some repeated calls to {E,W}STACK_PUSH
erts: Yield in term_to_binary when encoding big maps
erts: Remove unnecessary goto for fun encoding
erts: Yield in term_to_binary while copying large binaries
erts: Implement yielding for distributed send of large messages
|
|
Use same mechanism as term_to_binary to yield
while encoding large messages for distributed send.
|
