| Age | Commit message (Collapse) | Author |
|---|
|
to use a real C struct instead of array.
|
|
|
|
The call_time trace is a special kind of tracing that requires
a tracer process just like ordinary call trace, but it never
actually sends anything to the tracer. It merely use the existence
of a trace process (and call trace flags) as an indication that
call_time tracing is active for the process.
If the tracer dies in a non-SMP run-time system, processes with
call_time tracing would not notice that the tracer had
died. Furthermore, if the set_on_spawn flag was active, the dead
tracer could be propagaged to newly spawned processes.
Before accumulating trace information in a non-SMP system, always
validate the tracer process. (In an SMP system, a reference to a
dead tracer will be cleared away each time a process is scheduled.)
While we could put all of the new code beam_bp.c, we have chosen to
make a function call from beam_bp.c to a function in erl_trace.c for
clarity's sake and to ease further maintenance. In the future, we
might want to handle tracing in more similar ways in the SMP and
non-SMP system.
|
|
|
|
|
|
|
|
The following are deliberately left, as I have only a list of compiler
warnings and no system to test on:
hipe/hipe_x86_signal.c:264:5: warning: no previous prototype for function '_sigaction' [-Wmissing-prototypes]
int __SIGACTION(int signum, const struct sigaction *act, struct sigaction *oldact)
^
hipe/hipe_x86_signal.c:222:21: note: expanded from macro '__SIGACTION'
^
1 warning generated.
sys/unix/sys_float.c:835:16: warning: declaration of 'struct exception' will not be visible outside of this function [-Wvisibility]
matherr(struct exception *exc)
^
sys/unix/sys_float.c:835:1: warning: no previous prototype for function 'matherr' [-Wmissing-prototypes]
matherr(struct exception *exc)
^
2 warnings generated.
drivers/unix/unix_efile.c:1504:11: warning: implicit declaration of function 'sendfile' [-Wimplicit-function-declaration]
retval = sendfile(in_fd, out_fd, *offset, SENDFILE_CHUNK_SIZE,
^
1 warning generated.
|
|
OTP-10415
* sverk/egil/r16/new-alloc-header-scheme/OTP-10273: (42 commits)
erts: Make ll main mbc fit into 2pow size
erts: Clear entire mseg cache upon request
erts: Reduce max heap sizes
tests: Refactor away ?line macro in beam_SUITE
tests: Fix heap_sizes check
tests: Refactor away ?line macro in process_SUITE
tests: Use new correct min_bin_vheap_size in test
erts: Set super alignment (256kb) and limits for sbct (8Mb) and lmbcs (128Mb)
erts: Do not cache segments that are misaligned
erts: Add mseg cache for large sbc segments
erts: Reintroduce mseg options amcbf and rmcbf
erts: Optimize erl_alloc_util.c by substitute MBC_BLK_SZ
erts: Fix bug when allocating size near sbc_threshold
erts: Make gc sizes fit into MB Carrier blocks
erts: Force sbmbc to be disabled in a crude way
erts: Fix new header scheme for win64
erts: Fix mseg cache. Malplaced NULL pointer
erts: Remove unused mseg options amcbf and rmcbf
erts: Use aligned bits as constant in mseg_alloc
erts: Don't let zero be considered a power of two
...
Conflicts:
erts/emulator/test/process_SUITE.erl
|
|
rickard/r16/port-optimizations/OTP-10336
* rickard/port-optimizations/OTP-10336:
Change annotate level for emacs-22 in cerl
Update etp-commands
Add documentation on communication in Erlang
Add support for busy port message queue
Add driver callback epilogue
Implement true asynchronous signaling between processes and ports
Add erl_drv_[send|output]_term
Move busy port flag
Use rwlock for driver list
Optimize management of port tasks
Improve configuration of process and port tables
Remove R9 compatibility features
Use ptab functionality also for ports
Prepare for use of ptab functionality also for ports
Atomic port state
Generalize process table implementation
Implement functionality for delaying thread progress from unmanaged threads
Conflicts:
erts/doc/src/erl_driver.xml
erts/doc/src/erlang.xml
erts/emulator/beam/beam_bif_load.c
erts/emulator/beam/beam_bp.c
erts/emulator/beam/beam_emu.c
erts/emulator/beam/bif.c
erts/emulator/beam/copy.c
erts/emulator/beam/erl_alloc.c
erts/emulator/beam/erl_alloc.types
erts/emulator/beam/erl_bif_info.c
erts/emulator/beam/erl_bif_port.c
erts/emulator/beam/erl_bif_trace.c
erts/emulator/beam/erl_init.c
erts/emulator/beam/erl_message.c
erts/emulator/beam/erl_port_task.c
erts/emulator/beam/erl_process.c
erts/emulator/beam/erl_process.h
erts/emulator/beam/erl_process_lock.c
erts/emulator/beam/erl_trace.c
erts/emulator/beam/export.h
erts/emulator/beam/global.h
erts/emulator/beam/io.c
erts/emulator/sys/unix/sys.c
erts/emulator/sys/vxworks/sys.c
erts/emulator/test/port_SUITE.erl
erts/etc/unix/cerl.src
erts/preloaded/ebin/erlang.beam
erts/preloaded/ebin/prim_inet.beam
erts/preloaded/src/prim_inet.erl
lib/hipe/cerl/erl_bif_types.erl
lib/kernel/doc/src/inet.xml
lib/kernel/src/inet.erl
|
|
|
|
|
|
The concept of code_write_permission is used by tracing as well
and is not specific to code_ix.
|
|
|
|
Calls to erlang:set_trace_pattern/3 will no longer block all
other schedulers.
We will still go to single-scheduler mode when new code is loaded
for a module that is traced, or when loading code when there is a
default trace pattern set. That is not impossible to fix, but that
requires much closer cooperation between tracing BIFs and the loader
BIFs.
|
|
To allow us to manage breakpoints without going to single-scheduler
mode, we will need to update the breakpoints in several stages with
memory barriers in between each stage. Prepare for that by splitting
up the breakpoint setting and clearing functions into several smaller
functions.
|
|
Change the data structures for breakpoints to make it possible
(in a future commit) to manage breakpoints without taking down the
system to single-scheduling mode.
The current "breakpoint wheel" data structure (a circular,
double-linked list of breakpoints) was invented before the
SMP emulator. To support it in the SMP emulator, there is essentially
one breakpoint wheel per scheduler. As more breakpoint types have
been added, the implementation has become messy and hard to understand
and maintain.
Therefore, the time for a rewrite has come. Use one struct to hold
all breakpoint data for a breakpoint in a function. Use a flag field
to indicate what different type of break actions that are enabled.
|
|
* rickard/proc-sched/OTP-9892:
Teach etp-commands to understand new emulator internal data structures
Optimize process state changes
Optimize process table access
Implement possibility to use ordinary mutexes as process locks
Conflicts:
erts/emulator/beam/erl_alloc.types
|
|
|
|
|
|
|
|
|
|
The is a refactoring in preparation to add a counter in Module struct
for export entry tracing. It is nicer if the two are kept together.
|
|
|
|
|
|
Commit 64ccd8c9b7a782ca777ca4649dbb1f4a1ef00bce introduced BIF
stubs. The stub functions were not actually remove the loaded
code, but the name of the function in the func_info instruction
was changed to [] to mark it as invalid.
|
|
|
|
Inlining was not done in a portable way. clang follows the C99
semantics for inlining ('inline' essentially implies 'static' in
C99, but not in GCC), so bp_sched2ix() was not visible outside
beam_bp.c. Since the function need to be used from more than one
source file, put the function definition in the beam_bp.h header
file. Also, give it an 'erts_' prefix since it is globally visible.
|
|
* rickard/thr-progress-block/OTP-9631:
Replace system block with thread progress block
|
|
The ERTS internal system block functionality has been replaced by
new functionality for blocking the system. The old system block
functionality had contention issues and complexity issues. The
new functionality piggy-backs on thread progress tracking functionality
needed by newly introduced lock-free synchronization in the runtime
system. When the functionality for blocking the system isn't used
there is more or less no overhead at all. This since the functionality
for tracking thread progress is there and needed anyway.
|
|
|
|
All uses of the old deprecated atomic API in the runtime system
have been replaced with the use of the new atomic API. In a lot of
places this change imply a relaxation of memory barriers used.
|
|
|
|
If a rehash was done the old hash value was used. This was incorrect.
|
|
|
|
|
|
Call count previously used a global lock for accessing and writing
its counter in the breakpoint. This is now changed to atomics instead.
The change will let call count tracing and cprof to scale better
when increasing the number of schedulers.
|
|
To solve the issue of multiple schedulers constantly updating the
head pointer to the bp data wheel, each scheduler now has its own
entrypoint to the wheel. This head pointer can be updated without
a locking being taken. Previously there were no lock ...
|
|
|
|
call_time trace will use instruction pointers instead of
breakpoint data pointers. More costly lookup but the bdt
structure might be deallocated, we do not want that.
Remove unnecessary pattern lock.
|
|
|
|
op_i_time_breakpoint is now used
|
|
Call time breakpoint tracing traces per call trace per process.
- Add hashes to support the extra dimension.
- Teach trace_info/2 to handle the extra information dimension.
|
|
Initial commit with a new breakpoint instruction and PSD areas
for temporary time storage during tracing.
|
|
* pan/otp_8332_halfword:
Teach testcase in driver_suite the new prototype for driver_async
wx: Correct usage of driver callbacks from wx thread
Adopt the new (R13B04) Nif functionality to the halfword codebase
Support monitoring and demonitoring from driver threads
Fix further test-suite problems
Correct the VM to work for more test suites
Teach {wordsize,internal|external} to system_info/1
Make tracing and distribution work
Turn on instruction packing in the loader and virtual machine
Add the BeamInstr data type for loaded BEAM code
Fix the BEAM dissambler for the half-word emulator
Store pointers to heap data in 32-bit words
Add a custom mmap wrapper to force heaps into the lower address range
Fit all heap data into the 32-bit address range
|
|
For cleanliness, use BeamInstr instead of the UWord
data type to any machine-sized words that are used
for BEAM instructions. Only use UWord for untyped
words in general.
|
|
Store Erlang terms in 32-bit entities on the heap, expanding the
pointers to 64-bit when needed. This works because all terms are stored
on addresses in the 32-bit address range (the 32 most significant bits
of pointers to term data are always 0).
Introduce a new datatype called UWord (along with its companion SWord),
which is an integer having the exact same size as the machine word
(a void *), but might be larger than Eterm/Uint.
Store code as machine words, as the instructions are pointers to
executable code which might reside outside the 32-bit address range.
Continuation pointers are stored on the 32-bit stack and hence must
point to addresses in the low range, which means that loaded beam code
much be placed in the low 32-bit address range (but, as said earlier,
the instructions themselves are full words).
No Erlang term data can be stored on C stacks (enforced by an
earlier commit).
This version gives a prompt, but test cases still fail (and dump core).
The loader (and emulator loop) has instruction packing disabled.
The main issues has been in rewriting loader and actual virtual
machine. Subsystems (like distribution) does not work yet.
|
|
|
