| Age | Commit message (Collapse) | Author |
|---|
|
* lukas/erts/20_minor_fixes:
erts: Rebuild etc executables if config.h changes
erts: Fix new gcc warning in check io
kernel: Add mem check to prim_file:large_write tc
erts: Fix two compiler warnings on OS X
erts: Fix erts_debug:df function info output
erts: Get rid of some unused function warnings on os x
|
|
* rickard/sched_type_tests:
Fix dirty scheduler type tests
|
|
OTP-14331
* rickard/pcre-8.40:
Update documentation
Update README.pcre_update.md
Stack guard for PCRE
Adjust for incompatibility between PCRE 8.40 and perl 5.22.1
Generate re replacement and split tests with perl vsn 5.22.1
Fix re_SUITE:pcre_compile_workspace_overflow/1
Skip line with lockout of modifiers in PCRE tests
Update tests for PCRE version 8.40
Update PCRE to version 8.40
Conflicts:
erts/emulator/beam/beam_debug.c
|
|
|
|
The func_info instruction should also be dumped, so that we know
which function is which in the dump. This was accidentally removed
when introducing the new codeinfo/codemfa api.
|
|
Old test for dirty schedulers didn't work with Visual C++
|
|
|
|
|
|
|
|
Instead of passing around a file descriptor
use a function pointer to facilitate more advanced
backend write logic such as size limitation or compression.
|
|
|
|
|
|
This commit adds two new structs to be used to represent
erlang code in erts.
ErtsCodeInfo is used to describe the i_func_info header
that is part of all Export entries and the prelude of
each function. This replaces all the BeamInstr * that
were previously used to point to these locations.
After this change the code should never use BeamInstr *
with offsets to figure out different parts of the
func_info header.
ErtsCodeMFA is a struct that is used to descripe a
MFA in code. It is used within ErtsCodeInfo and also
in Process->current.
All function that previously took Eterm * or BeamInstr *
to identify a MFA now use the ErtsCodeMFA or ErtsCodeInfo
where appropriate.
The code has been tested to work when adding a new field to the
ErtsCodeInfo struct, but some updates are needed in ops.tab to
make it work.
|
|
Using the translation table in erts_gc_bifs[], we can now print
out the name of GC BIFs, instead of just the pointer value.
|
|
* bjorn/erts/beam_load:
Optimize get_tuple_element instructions that target Y registers
Mend beam_SUITE:packed_registers/1
Correct unpacking of 3 operands on 32-bit archictectures
Eliminate misleading #ifdef ARCH_64 in beam_opcodes.h
beam_debug: Correct masking when unpacking packed operands
|
|
|
|
|
|
The TMPBUF option is no longer needed due to is_literal test and NONE
was only used for initial debugging. So we remove the entire option.
|
|
|
|
This commit is just for debugging purposes, will probably be reverted.
It comes with a the erts_debug:copy_shared/1 BIF. If SHCOPY_DISABLE
is defined, SHCOPY starts disabled and is dynamically enabled the first
time that the BIF is called.
|
|
|
|
* sverk/literal-memory-range:
erts: Refactor line table in loaded beam code
erts: Refactor header of loaded beam code
fix check_process_code for separate literal area
erts: Add support for fast erts_is_literal()
erts: Refactor erl_mmap to allow several mapper instances
erts: Add new allocator LITERAL
erts: Fix strangeness in treatment of MSEG_ALIGN_BITS
erts: Cleanup main carrier creation
erts: Remove unused erts_have_erts_mmap
erts: Refactor config test for posix_memalign
|
|
to use a real C struct instead of array.
|
|
|
|
|
|
* maint:
Fix crash when disassembling modules with BIFs
|
|
In a debug-compiled emulator, running erts_debug:df(io) would
trigger an assertion failure:
1> erts_debug:df(io).
beam/beam_debug.c:301:erts_debug_disassemble_1() Assertion failed: (((funcinfo[0]) & 0x3F) == ((0x0 << 4) | ((0x2 << 2) | 0x3)))
Aborted (core dumped)
It turns out that the assertion is wrong. It should have been
updated in 64ccd8c9b7a7 which made it possible to have stubs for
BIFs in the BEAM code for a module. The faulty assertion was only
found when when 16317f73f79265 added a smoke test of the BEAM
disassembler.
|
|
Since 'd' operands can only either an X register or an Y register,
we only need a single bit to distinguish them. Furthermore, we can
pre-multiply the register number with the word size to speed up
address calculation.
|
|
The 'r' type is now mandatory. That means in order to handle
both of the following instructions:
move x(0) y(7)
move x(1) y(7)
we would need to define two specific operations in ops.tab:
move r y
move x y
We want to make 'r' operands optional. That is, if we have
only this specific instruction:
move x y
it will match both of the following instructions:
move x(0) y(7)
move x(1) y(7)
Make 'r' optional allows us to save code space when we don't
want to make handling of x(0) a special case, but we can still
use 'r' to optimize commonly used instructions.
|
|
Consider the try_case_end instruction:
try_case_end s
The 's' operand type means that the operand can either be a
literal of one of the types atom, integer, or empty list, or
a register. That worked well before R12. In R12 additional
types of literals where introduced. Because of way the
overloading was done, an 's' operand cannot handle the
new types of literals. Therefore, code such as the following
is necessary in ops.tab to avoid giving an 's' operand a
literal:
try_case_end Literal=q => move Literal x | try_case_end x
While this work, it is error-prone in that it is easy to
forget to add that kind of rule. It would also be complicated
in case we wanted to introduce a new kind of addition operator
such as:
i_plus jssd
Since there are two 's' operands, two scratch registers and
two 'move' instructions would be needed.
Therefore, we'll need to find a smarter way to find tag
register operands. We will overload the pid and port tags
for X and Y register, respectively. That works because pids
and port are immediate values (fit in one word), and there
are no literals for pids and ports.
|
|
|
|
The emulator would crash.
|
|
|
|
Sentinels in select_tuple_arity instructions are not proper
tuple arities and thus cannot be checked in debug.
Print them as small integers instead.
|
|
The has_map_fields instruction is infrequently used. Thus there
is no need to have the fastest possible implementation; it is
better to have an implementation that reduces the code size in
the already big process_main() function.
We can transform has_map_fields to a get_map_elements instruction,
targeting the same unused x[0] register for all keys. That
instruction will only be marginally slower than existing
implementation.
|
|
The new_map instruction cannot fail, and thus needs no fail label.
|
|
For searching a key in an array we use linear search in arrays
up to 10 elements.
Selecting on tuple arity will always use linear search.
Instead of using two different instructions we assume selecting on
different tuple arities are always few in numbers.
|
|
Now handles map instructions correctly.
|
|
|
|
Calls to erlang:set_trace_pattern/3 will no longer block all
other schedulers.
We will still go to single-scheduler mode when new code is loaded
for a module that is traced, or when loading code when there is a
default trace pattern set. That is not impossible to fix, but that
requires much closer cooperation between tracing BIFs and the loader
BIFs.
|
|
To allow us to manage breakpoints without going to single-scheduler
mode, we will need to update the breakpoints in several stages with
memory barriers in between each stage. Prepare for that by splitting
up the breakpoint setting and clearing functions into several smaller
functions.
|
|
Rename lock_code_ix as seize_code_write_permission. Don't want to call
it a "lock" as it can be held between schedulings and different threads
and is not managed by lock checker.
Rename "activate" staging as "commit" staging. Why not be consistent
and use git terminology all the way.
|
|
We want to avoid the race when trace settings are done in the time gap
while a code stager process is waiting for thread process before
commiting and releasing code_ix lock.
|
|
|
|
|
|
Still blocking code loading
|
|
|
|
* rickard/thr-progress-block/OTP-9631:
Replace system block with thread progress block
|
|
The ERTS internal system block functionality has been replaced by
new functionality for blocking the system. The old system block
functionality had contention issues and complexity issues. The
new functionality piggy-backs on thread progress tracking functionality
needed by newly introduced lock-free synchronization in the runtime
system. When the functionality for blocking the system isn't used
there is more or less no overhead at all. This since the functionality
for tracking thread progress is there and needed anyway.
|
|
As a preparation for changing the calling convention for
BIFs, make sure that all BIFs use the macros. Also, eliminate
all calls from one BIF to another, since that also breaks
the calling convention abstraction.
|
