| Age | Commit message (Collapse) | Author |
|---|
|
This type of statistics is now available through the microstate
accounting API.
|
|
|
|
The max_heap_size process flag can be used to limit the
growth of a process heap by killing it before it becomes
too large to handle. It is possible to set the maximum
using the `erl +hmax` option, `system_flag(max_heap_size, ...)`,
`spawn_opt(Fun, [{max_heap_size, ...}])` and
`process_flag(max_heap_size, ...)`.
It is possible to configure the behaviour of the process
when the maximum heap size is reached. The process may be
sent an untrappable exit signal with reason kill and/or
send an error_logger message with details on the process
state. A new trace event called gc_max_heap_size is
also triggered for the garbage_collection trace flag
when the heap grows larger than the configured size.
If kill and error_logger are disabled, it is still
possible to see that the maximum has been reached by
doing garbage collection tracing on the process.
The heap size is defined as the sum of the heap memory
that the process is currently using. This includes
all generational heaps, the stack, any messages that
are considered to be part of the heap and any extra
memory the garbage collector may need during collection.
In the current implementation this means that when a process
is set using on_heap message queue data mode, the messages
that are in the internal message queue are counted towards
this value. For off_heap, only matched messages count towards
the size of the heap. For mixed, it depends on race conditions
within the VM whether a message is part of the heap or not.
Below is an example run of the new behaviour:
Eshell V8.0 (abort with ^G)
1> f(P),P = spawn_opt(fun() -> receive ok -> ok end end, [{max_heap_size, 512}]).
<0.60.0>
2> erlang:trace(P, true, [garbage_collection, procs]).
1
3> [P ! lists:duplicate(M,M) || M <- lists:seq(1,15)],ok.
ok
4>
=ERROR REPORT==== 26-Apr-2016::16:25:10 ===
Process: <0.60.0>
Context: maximum heap size reached
Max heap size: 512
Total heap size: 723
Kill: true
Error Logger: true
GC Info: [{old_heap_block_size,0},
{heap_block_size,609},
{mbuf_size,145},
{recent_size,0},
{stack_size,9},
{old_heap_size,0},
{heap_size,211},
{bin_vheap_size,0},
{bin_vheap_block_size,46422},
{bin_old_vheap_size,0},
{bin_old_vheap_block_size,46422}]
flush().
Shell got {trace,<0.60.0>,gc_start,
[{old_heap_block_size,0},
{heap_block_size,233},
{mbuf_size,145},
{recent_size,0},
{stack_size,9},
{old_heap_size,0},
{heap_size,211},
{bin_vheap_size,0},
{bin_vheap_block_size,46422},
{bin_old_vheap_size,0},
{bin_old_vheap_block_size,46422}]}
Shell got {trace,<0.60.0>,gc_max_heap_size,
[{old_heap_block_size,0},
{heap_block_size,609},
{mbuf_size,145},
{recent_size,0},
{stack_size,9},
{old_heap_size,0},
{heap_size,211},
{bin_vheap_size,0},
{bin_vheap_block_size,46422},
{bin_old_vheap_size,0},
{bin_old_vheap_block_size,46422}]}
Shell got {trace,<0.60.0>,exit,killed}
|
|
* rickard/reds-fix/master/OTP-13512:
Ensure correct reduction counting
|
|
|
|
Flags that control the heap should all fall under the +h flag
|
|
* henrik/update-copyrightyear:
update copyright-year
|
|
* lukas/erts/fix_scheduler_suspend/ERL-94/PR-978/OTP-13425:
erts: Fix install of suspend handler
Conflicts:
erts/emulator/sys/unix/erl_unix_sys.h
erts/emulator/sys/unix/sys.c
|
|
|
|
|
|
This is mostly a pure refactoring.
Except for the buggy cases when calling erlang:halt() with a positive
integer in the range -(INT_MIN+2) to -INT_MIN that got confused with
ERTS_ABORT_EXIT, ERTS_DUMP_EXIT and ERTS_INTR_EXIT.
Outcome OLD erl_exit(n, ) NEW erts_exit(n, )
------- ------------------- -------------------------------------------
exit(Status) n = -Status <= 0 n = Status >= 0
crashdump+abort n > 0, ignore n n = ERTS_ERROR_EXIT < 0
The outcome of the old ERTS_ABORT_EXIT, ERTS_INTR_EXIT and
ERTS_DUMP_EXIT are the same as before (even though their values have
changed).
|
|
This commit makes sure to setup the suspend handler
to matter what +B option is given at the command line.
|
|
* sverk/thread-unsafe-alloc:
erts: Fix faulty assert for non-smp
erts: Add checks for thread safe allocation
|
|
Microstate accounting is a way to track which state the
different threads within ERTS are in. The main usage area
is to pin point performance bottlenecks by checking which
states the threads are in and then from there figuring out
why and where to optimize.
Since checking whether microstate accounting is on or off is
relatively expensive if done in a short loop only a few of the
states are enabled by default and more states can be enabled
through configure.
I've done some benchmarking and the overhead with it turned off
is not noticible and with it on it is a fraction of a percent.
If you enable the extra states, depending on the benchmark,
the ovehead when turned off is about 1% and when turned on
somewhere inbetween 5-15%.
OTP-12345
|
|
Assert thread unsafe allocator is only created on non-smp
and only called by the main thread.
Removed test of unsafe allocator in custom thread.
|
|
as a system process with preloaded code.
|
|
OTP-13167
* sverk/proc-dict-opt:
erts: Add new test case pdict_SUITE:mixed
erts: Add 'fill_heap' to erts_debug:state_internal_state
erts: Rename proc dict size to arraySize
erts: Refactor proc dict with 'usedSlots'
erts: Add sizeMask for faster proc dict indexing
erts: Remove ProcDict.used
erts: Add proc dict macros ERTS_PD_START/SIZE
erts: Optimize away function "array_put" in proc dict
erts: Optimize hashing in process dictionary
|
|
* lukas/erts/forker: (28 commits)
erts: Never abort in the forked child
erts: Mend ASSERT makro for erl_child_setup
erts: Allow enomem failures in port_SUITE
erts: iter_port sleep longer on freebsd
erts: Allow one dangling fd if there is a gethost port
erts: Only use forker StackAck on freebsd
erts: It is not possible to exit the forker driver
erts: Add forker StartAck for port start flowcontrol
erts: Fix large open_port arg segfault for win32
erts: Fix memory leak at async open port
kernel: Remove cmd server for unix os:cmd
erts: Add testcase for huge port environment
erts: Move os_pid to port hash to child setup
erts: Handle all EINTR and EAGAIN cases in child setup
erts: Make child_setup work with large environments
erts: Fix forker driver ifdefs for win32
erts: Fix uds socket handling for os x
erts: Fix dereferencing of unaligned integer for sparc
erts: Flatten too long io vectors in uds write
erts: Add fd count test for spawn_driver
...
Conflicts:
erts/emulator/beam/erl_node_tables.c
erts/preloaded/src/erts_internal.erl
|
|
Instead of forking from the beam process, we create a separate
process in which all forks are done. This has several advantages:
1) performance:
* don't have to close all fd's in the world
* fork only has to copy stuff from a small process
* work is done in a completely seperate process
* a 3x performance increase has been measured,
can be made even greater (10x) if we cache the
environment in child setup
2) stability
* the exec is done in another process than beam, which means that
if the file that we exec to is on an nfs that is not available
right now we will not block a scheduler until the nfs returns.
3) simplicity
* don't have to deal with SIGCHLD in the erts
Unfortunately, this solution also implies some badness.
1) There will always be a seperate process running together with
beam on unix. This could be confusing and undesirable.
2) We have to transfer the entire environment to child_setup
for each command.
OTP-13088
|
|
by limiting table sizes to powers of 2.
This will change the default size from 10 to 8.
|
|
* rickard/ohmq-fixup/OTP-13047:
Replace off_heap_message_queue option with message_queue_data option
Always use literal_alloc
Distinguish between GC disabled by BIFs and other disabled GC
Fix process_info(_, off_heap_message_queue)
Off heap message queue test suite
Remove unused variable
Fix memory leaks
|
|
The message_queue_data option can have the values
- off_heap
- on_heap
- mixed
|
|
This is very verbose, you have been warned.
It should work with the copy-spy.py script, which may be a bit outdated.
|
|
* The youngest generation of the heap can now consist of multiple
blocks. Heap fragments and message fragments are added to the
youngest generation when needed without triggering a GC. After
a GC the youngest generation is contained in one single block.
* The off_heap_message_queue process flag has been added. When
enabled all message data in the queue is kept off heap. When
a message is selected from the queue, the message fragment (or
heap fragment) containing the actual message is attached to the
youngest generation. Messages stored off heap is not part of GC.
|
|
|
|
|
|
* rickard/+zebwt/OTP-12830:
ETS busy wait option
|
|
Conflicts:
erts/emulator/beam/erl_init.c
erts/etc/common/erlexec.c
|
|
* sverk/map-merge-trap:
erts: Optimize maps:merge
erts: Yield in maps:merge
erts: Refactor arg swapping for maps:merge
erts: Add save/restore for PSTACK
erts: Fix magic binary alignment on 32-bit
erts: Add maps to send_term_SUITE
erts: Fix calculation of reclaimed data during full gc
erts: Fix warning about const pointer to make_boxed and make_list
erts: Fix typo in etp-carrier-blocks
|
|
|
|
* rickard/delayed-delete-node/OTP-12802:
Fix error checking for +zdntgc flag
|
|
|
|
* rickard/delayed-delete-node/OTP-12802:
Delayed node table GC
|
|
|
|
* richcarl/warnings-by-default/OTP-12781:
stdlib: Use warning channel in test qlc_SUITE:otp_6964/1
stdlib: Fix testcase for qlc_SUITE
kernel: Fix code_SUITE with respect to new logger default
Map error logger warnings to warning messages by default
|
|
Also fix and document the broken +We option.
|
|
This reverts commit 4c4d7fa40e5fb59854724ce74b8aa3546525cb90.
This pr is causing some test failures that were missed at first.
|
|
Also fix and document the broken +We option.
|
|
* rickard/timer-optimization/OTP-12650:
Optimized timer implementation
Reusable red-black tree implementation
Conflicts:
erts/emulator/beam/erl_bif_timer.c
|
|
|
|
* sverk/etp-map:
erts: Add map support to gdb etp command
erts: Add etp_the_non_value
|
|
* We use compile directive icount instead
|
|
for a correct (non)value regardless of build type.
|
|
* rickard/time_api/OTP-11997:
Unbreak lcnt
|
|
|
|
* rickard/time_api/OTP-11997: (22 commits)
Update primary bootstrap
inets: Suppress deprecated warning on erlang:now/0
inets: Cleanup of multiple copies of functions Add inets_lib with common functions used by multiple modules
inets: Update comments
Suppress deprecated warning on erlang:now/0
Use new time API and be back-compatible in inets Remove unused functions and removed redundant test
asn1 test SUITE: Eliminate use of now/0
Disable deprecated warning on erlang:now/0 in diameter_lib
Use new time API and be back-compatible in ssh
Replace all calls to now/0 in CT with new time API functions
test_server: Replace usage of erlang:now() with usage of new API
Replace usage of erlang:now() with usage of new API
Replace usage of erlang:now() with usage of new API
Replace usage of erlang:now() with usage of new API
Replace usage of erlang:now() with usage of new API
otp_SUITE: Warn for calls to erlang:now/0
Replace usage of erlang:now() with usage of new API
Multiple timer wheels
Erlang based BIF timer implementation for scalability
Implement ethread events with timeout
...
Conflicts:
bootstrap/bin/start.boot
bootstrap/bin/start_clean.boot
bootstrap/lib/compiler/ebin/beam_asm.beam
bootstrap/lib/compiler/ebin/compile.beam
bootstrap/lib/kernel/ebin/auth.beam
bootstrap/lib/kernel/ebin/dist_util.beam
bootstrap/lib/kernel/ebin/global.beam
bootstrap/lib/kernel/ebin/hipe_unified_loader.beam
bootstrap/lib/kernel/ebin/inet_db.beam
bootstrap/lib/kernel/ebin/inet_dns.beam
bootstrap/lib/kernel/ebin/inet_res.beam
bootstrap/lib/kernel/ebin/os.beam
bootstrap/lib/kernel/ebin/pg2.beam
bootstrap/lib/stdlib/ebin/dets.beam
bootstrap/lib/stdlib/ebin/dets_utils.beam
bootstrap/lib/stdlib/ebin/erl_tar.beam
bootstrap/lib/stdlib/ebin/escript.beam
bootstrap/lib/stdlib/ebin/file_sorter.beam
bootstrap/lib/stdlib/ebin/otp_internal.beam
bootstrap/lib/stdlib/ebin/qlc.beam
bootstrap/lib/stdlib/ebin/random.beam
bootstrap/lib/stdlib/ebin/supervisor.beam
bootstrap/lib/stdlib/ebin/timer.beam
erts/aclocal.m4
erts/emulator/beam/bif.c
erts/emulator/beam/erl_bif_info.c
erts/emulator/beam/erl_db_hash.c
erts/emulator/beam/erl_init.c
erts/emulator/beam/erl_process.h
erts/emulator/beam/erl_thr_progress.c
erts/emulator/beam/utils.c
erts/emulator/sys/unix/sys.c
erts/preloaded/ebin/erlang.beam
erts/preloaded/ebin/erts_internal.beam
erts/preloaded/ebin/init.beam
erts/preloaded/src/erts_internal.erl
lib/common_test/test/ct_hooks_SUITE_data/cth/tests/empty_cth.erl
lib/diameter/src/base/diameter_lib.erl
lib/kernel/src/os.erl
lib/ssh/test/ssh_basic_SUITE.erl
system/doc/efficiency_guide/advanced.xml
|
|
|
|
|
|
The old time API is based on erlang:now/0. The major issue with
erlang:now/0 is that it was intended to be used for so many
unrelated things. This tied these unrelated operations together
and unnecessarily caused performance, scalability as well as
accuracy, and precision issues for operations that do not need
to have such issues. The new API spreads different functionality
over multiple functions in order to improve on this.
The new API consists of a number of new BIFs:
- erlang:convert_time_unit/3
- erlang:monotonic_time/0
- erlang:monotonic_time/1
- erlang:system_time/0
- erlang:system_time/1
- erlang:time_offset/0
- erlang:time_offset/1
- erlang:timestamp/0
- erlang:unique_integer/0
- erlang:unique_integer/1
- os:system_time/0
- os:system_time/1
and a number of extensions of existing BIFs:
- erlang:monitor(time_offset, clock_service)
- erlang:system_flag(time_offset, finalize)
- erlang:system_info(os_monotonic_time_source)
- erlang:system_info(time_offset)
- erlang:system_info(time_warp_mode)
- erlang:system_info(time_correction)
- erlang:system_info(start_time)
See the "Time and Time Correction in Erlang" chapter of the
ERTS User's Guide for more information.
|
|
* egil/process_dictionary-initial-size/OTP-12535:
erts: Document option 'hpds'
erts: Enable command line argument for initial pd size
|
