Age | Commit message (Collapse) | Author |
|
|
|
|
|
This commit adds two new structs to be used to represent
erlang code in erts.
ErtsCodeInfo is used to describe the i_func_info header
that is part of all Export entries and the prelude of
each function. This replaces all the BeamInstr * that
were previously used to point to these locations.
After this change the code should never use BeamInstr *
with offsets to figure out different parts of the
func_info header.
ErtsCodeMFA is a struct that is used to descripe a
MFA in code. It is used within ErtsCodeInfo and also
in Process->current.
All function that previously took Eterm * or BeamInstr *
to identify a MFA now use the ErtsCodeMFA or ErtsCodeInfo
where appropriate.
The code has been tested to work when adding a new field to the
ErtsCodeInfo struct, but some updates are needed in ops.tab to
make it work.
|
|
* kvakvs/erts/gc_minor_option/OTP-11695:
erts: Fix req_system_task gc typespec
Fix process_SUITE system_task_blast and no_priority_inversion2
Option to erlang:garbage_collect to request minor (generational) GC
Conflicts:
erts/emulator/beam/erl_process.c
erts/preloaded/src/erts_internal.erl
|
|
* bjorn/erts/help-clang:
Slightly reduce code size of process_main()
|
|
* rickard/remove-old-purge-strategy/OTP-13844:
Avoid selective receive in code-purger process
Remove old purge strategy
Conflicts:
erts/emulator/beam/beam_bif_load.c
erts/emulator/beam/global.h
|
|
clang will generate smaller code if we avoid reassigning the
reg and freg arrays. That can be easily arranged by passing them
as arguments to process_main().
|
|
|
|
* maint:
Fix dirty schedulers build on windows
|
|
* rickard/ds-win-32bit/OTP-13759:
Fix dirty schedulers build on windows
|
|
* maint:
Fix tracing of processes executing dirty
Perform check_process_code while process is executing dirty
Fix purge of code
Reclaim literal area after purge has completed
Separate literal area from code
Conflicts:
erts/emulator/beam/global.h
|
|
* rickard/ds-trace/OTP-13822:
Fix tracing of processes executing dirty
|
|
* rickard/ds-purge-module/OTP-13808:
Perform check_process_code while process is executing dirty
Conflicts:
erts/doc/src/erl_nif.xml
|
|
'rickard/new-purge-strategy/OTP-13833' into maint
* rickard/fun-purge-bug/OTP-13809:
Fix purge of code
Reclaim literal area after purge has completed
Separate literal area from code
Conflicts:
erts/doc/src/erlang.xml
erts/emulator/beam/beam_bif_load.c
erts/emulator/beam/erl_init.c
erts/preloaded/ebin/init.beam
|
|
|
|
|
|
|
|
|
|
|
|
Note: Minor GC option is a hint, and GC may still decide to run fullsweep.
Test case for major and minor gc on self
Test case for major and minor gs on some other process + async gc test check
docs fix
|
|
|
|
* Literals are not copied between processes for messages or spawn
Increases performance of message sent and processes spawned when
literals are involved in messages or arguments.
|
|
|
|
|
|
This type of statistics is now available through the microstate
accounting API.
|
|
|
|
* kvakvs/erts/monitor_port/OTP-11384:
erts: Add port monitors
|
|
* erlang:monitor/2 with port argument is added, erlang:demonitor, using port task API and avoiding locking;
* port_info and process_info support for monitored ports (with named port monitors support);
* Exit signals contain type 'process' or 'port';
* Propagation of port exit signals;
* Self-cleaning when origin process dies with monitor on;
* 8 test cases + testcase for port driver crashing;
* Documentation for all of the above (monitor, demonitor, port_info and process_info) updated
|
|
|
|
|
|
Dirty schedulers only execute NIFs, so having them execute the full
process_main function isn't necessary. Add dirty_process_main for
dirty schedulers to execute instead.
Add erts_pre_dirty_nif(), called when preparing to execute a dirty
nif.
Add more dirty NIF tests to verify that activities requiring the
process main lock can succeed when the process is executing a dirty
NIF.
|
|
|
|
* lukas/trace-fix:
erts: Only allow remove from trace_status callback
|
|
* rickard/ds-proc-exit/OTP-13123:
Add dirty_heap_access test case
Add dirty_call_while_terminated test case
Move dirty nif test cases into dirty_nif_SUITE
Add better support for communication with a process executing dirty NIF
Remove conditional dirty schedulers API
|
|
Make it so that it is only possible to remove a tracer via
returning remove from an erl_tracer. This limition is put in
place in order to avoid a lot of lock checking and taking
in various places, especially in regards to trace events
happening on dirty schedulers.
|
|
- Termination of a process...
- Modify trace flags of process...
- Process info on process...
- Register/unregister of name on process...
- Set group leader on process...
... while it is executing a dirty NIF.
|
|
The max_heap_size process flag can be used to limit the
growth of a process heap by killing it before it becomes
too large to handle. It is possible to set the maximum
using the `erl +hmax` option, `system_flag(max_heap_size, ...)`,
`spawn_opt(Fun, [{max_heap_size, ...}])` and
`process_flag(max_heap_size, ...)`.
It is possible to configure the behaviour of the process
when the maximum heap size is reached. The process may be
sent an untrappable exit signal with reason kill and/or
send an error_logger message with details on the process
state. A new trace event called gc_max_heap_size is
also triggered for the garbage_collection trace flag
when the heap grows larger than the configured size.
If kill and error_logger are disabled, it is still
possible to see that the maximum has been reached by
doing garbage collection tracing on the process.
The heap size is defined as the sum of the heap memory
that the process is currently using. This includes
all generational heaps, the stack, any messages that
are considered to be part of the heap and any extra
memory the garbage collector may need during collection.
In the current implementation this means that when a process
is set using on_heap message queue data mode, the messages
that are in the internal message queue are counted towards
this value. For off_heap, only matched messages count towards
the size of the heap. For mixed, it depends on race conditions
within the VM whether a message is part of the heap or not.
Below is an example run of the new behaviour:
Eshell V8.0 (abort with ^G)
1> f(P),P = spawn_opt(fun() -> receive ok -> ok end end, [{max_heap_size, 512}]).
<0.60.0>
2> erlang:trace(P, true, [garbage_collection, procs]).
1
3> [P ! lists:duplicate(M,M) || M <- lists:seq(1,15)],ok.
ok
4>
=ERROR REPORT==== 26-Apr-2016::16:25:10 ===
Process: <0.60.0>
Context: maximum heap size reached
Max heap size: 512
Total heap size: 723
Kill: true
Error Logger: true
GC Info: [{old_heap_block_size,0},
{heap_block_size,609},
{mbuf_size,145},
{recent_size,0},
{stack_size,9},
{old_heap_size,0},
{heap_size,211},
{bin_vheap_size,0},
{bin_vheap_block_size,46422},
{bin_old_vheap_size,0},
{bin_old_vheap_block_size,46422}]
flush().
Shell got {trace,<0.60.0>,gc_start,
[{old_heap_block_size,0},
{heap_block_size,233},
{mbuf_size,145},
{recent_size,0},
{stack_size,9},
{old_heap_size,0},
{heap_size,211},
{bin_vheap_size,0},
{bin_vheap_block_size,46422},
{bin_old_vheap_size,0},
{bin_old_vheap_block_size,46422}]}
Shell got {trace,<0.60.0>,gc_max_heap_size,
[{old_heap_block_size,0},
{heap_block_size,609},
{mbuf_size,145},
{recent_size,0},
{stack_size,9},
{old_heap_size,0},
{heap_size,211},
{bin_vheap_size,0},
{bin_vheap_block_size,46422},
{bin_old_vheap_size,0},
{bin_old_vheap_block_size,46422}]}
Shell got {trace,<0.60.0>,exit,killed}
|
|
|
|
All 'EXIT' and monitor messages are sent from 'system'
Timeouts are "sent" from 'clock_service'
|
|
* rickard/fix-sched-sys-task/OTP-13047:
Fix scheduling of system tasks
|
|
|
|
|
|
|
|
OTP-13497
This trace event is triggered when a process is created from the
process that is created.
|
|
This commit completes the tracing for processes so that
all messages sent by a process (via nifs or otherwise) will
be traced.
The commit also adds tracing of all types of events from ports.
When enabling tracing using erlang:trace, the 'all' flag now also
enables tracing on all ports.
OTP-13496
|
|
Add the possibility to use modules as trace data receivers. The functions
in the module have to be nifs as otherwise complex trace probes will be
very hard to handle (complex means trace probes for ports for example).
This commit changes the way that the ptab->tracer field works from always
being an immediate, to now be NIL if no tracer is present or else be
the tuple {TracerModule, TracerState} where TracerModule is an atom that
is later used to lookup the appropriate tracer callbacks to call and
TracerState is just passed to the tracer callback. The default process and
port tracers have been rewritten to use the new API.
This commit also changes the order which trace messages are delivered to the
potential tracer process. Any enif_send done in a tracer module may be delayed
indefinitely because of lock order issues. If a message is delayed any other
trace message send from that process is also delayed so that order is preserved
for each traced entity. This means that for some trace events (i.e. send/receive)
the events may come in an unintuitive order (receive before send) to the
trace receiver. Timestamps are taken when the trace message is generated so
trace messages from differented processes may arrive with the timestamp
out of order.
Both the erlang:trace and seq_trace:set_system_tracer accept the new tracer
module tracers and also the backwards compatible arguments.
OTP-10267
|
|
* henrik/update-copyrightyear:
update copyright-year
|
|
* egil/erts/tracing-beam-lttng/OTP-10282:
erts: Don't use ratio in carrier lttng tracepoints
Add lttng testcases
erts: Extend erlang:system_info/1 with lttng
Refactor and fix dtrace define in erl_message
erts: Add lttng tracepoints for async pool queue
erts: Add lttng tracepoints for drivers
erts: Add lttng tracepoints for scheduler events
erts: Add lttng tracepoints for memory carriers
erts: Update lttng-wrapper with mfa conversion
erts: Teach lttng to configure and build system
|
|
* scheduler_poll
|
|
* rickard/proc-free-fix/OTP-13446:
Fix bad refc management of process struct
Conflicts:
erts/emulator/beam/erl_process.c
|