Age | Commit message (Collapse) | Author |
|
|
|
|
|
OTP-13497
This trace event is triggered when a process is created from the
process that is created.
|
|
This commit completes the tracing for processes so that
all messages sent by a process (via nifs or otherwise) will
be traced.
The commit also adds tracing of all types of events from ports.
When enabling tracing using erlang:trace, the 'all' flag now also
enables tracing on all ports.
OTP-13496
|
|
Add the possibility to use modules as trace data receivers. The functions
in the module have to be nifs as otherwise complex trace probes will be
very hard to handle (complex means trace probes for ports for example).
This commit changes the way that the ptab->tracer field works from always
being an immediate, to now be NIL if no tracer is present or else be
the tuple {TracerModule, TracerState} where TracerModule is an atom that
is later used to lookup the appropriate tracer callbacks to call and
TracerState is just passed to the tracer callback. The default process and
port tracers have been rewritten to use the new API.
This commit also changes the order which trace messages are delivered to the
potential tracer process. Any enif_send done in a tracer module may be delayed
indefinitely because of lock order issues. If a message is delayed any other
trace message send from that process is also delayed so that order is preserved
for each traced entity. This means that for some trace events (i.e. send/receive)
the events may come in an unintuitive order (receive before send) to the
trace receiver. Timestamps are taken when the trace message is generated so
trace messages from differented processes may arrive with the timestamp
out of order.
Both the erlang:trace and seq_trace:set_system_tracer accept the new tracer
module tracers and also the backwards compatible arguments.
OTP-10267
|
|
* henrik/update-copyrightyear:
update copyright-year
|
|
* egil/erts/tracing-beam-lttng/OTP-10282:
erts: Don't use ratio in carrier lttng tracepoints
Add lttng testcases
erts: Extend erlang:system_info/1 with lttng
Refactor and fix dtrace define in erl_message
erts: Add lttng tracepoints for async pool queue
erts: Add lttng tracepoints for drivers
erts: Add lttng tracepoints for scheduler events
erts: Add lttng tracepoints for memory carriers
erts: Update lttng-wrapper with mfa conversion
erts: Teach lttng to configure and build system
|
|
* scheduler_poll
|
|
* rickard/proc-free-fix/OTP-13446:
Fix bad refc management of process struct
Conflicts:
erts/emulator/beam/erl_process.c
|
|
|
|
* rickard/improve-psd/OTP-13428:
Improve process/port specific data management
|
|
* rickard/delayed-gc-fix:
Allow delayed gc while scheduled out
|
|
|
|
|
|
that could hang if concurrent deallocations was initiated.
|
|
|
|
* vinoski/ds-avoid-lock:
Skip run queue lock check for dirty schedulers
|
|
- The calling process is now suspended while synchronizing
scheduler suspends via erlang:system_flag(schedulers_online, _)
and erlang:system_flag(multi_scheduling, _), instead of blocking
the scheduler thread in the BIF call waiting for the operation
to synchronize. Besides releasing the scheduler for other work
(or immediate suspend) it also makes it possible to abort the
operation by killing the process.
- erlang:system_flag(schedulers_online, _) now only wait for normal
schedulers to complete before it returns. This since it may take
a very long time before all dirty schedulers suspends.
- erlang:system_flag(multi_scheduling, block_normal|unblock_normal)
which only operate on normal schedulers has been introduced. This
since there are use cases where suspend of dirty schedulers are
not of interest (hipe loader).
- erlang:system_flag(multi_scheduling, block) still blocks all
dirty schedulers as well as all normal schedulers except one since
it is hard to redefine what multi scheduling block means.
- The three operations:
- changing amount of schedulers online
- blocking/unblocking normal multi scheduling
- blocking/unblocking full multi scheduling
can now be done in parallel. This is important since otherwise
a full multi scheduling block would potentially delay the other
operations for a very long time.
|
|
* sverk/master/halt-INT_MIN:
erts: Make erlang:halt() accept bignums as Status
erts: Change erl_exit into erts_exit
kernel: Remove calls to erl_exit
|
|
Conflicts:
erts/emulator/beam/erl_alloc.types
erts/emulator/beam/erl_bif_info.c
erts/emulator/beam/erl_process.c
erts/preloaded/ebin/erts_internal.beam
|
|
|
|
|
|
This is mostly a pure refactoring.
Except for the buggy cases when calling erlang:halt() with a positive
integer in the range -(INT_MIN+2) to -INT_MIN that got confused with
ERTS_ABORT_EXIT, ERTS_DUMP_EXIT and ERTS_INTR_EXIT.
Outcome OLD erl_exit(n, ) NEW erts_exit(n, )
------- ------------------- -------------------------------------------
exit(Status) n = -Status <= 0 n = Status >= 0
crashdump+abort n > 0, ignore n n = ERTS_ERROR_EXIT < 0
The outcome of the old ERTS_ABORT_EXIT, ERTS_INTR_EXIT and
ERTS_DUMP_EXIT are the same as before (even though their values have
changed).
|
|
* maint:
Do not wait for main lock when looking up process not running
|
|
|
|
The wake_scheduler function asserts that the run queue is not locked,
but this assertion sometimes fails for dirty schedulers (in January
2016 a user in erlang-questions reported a dirty schedulers problem
related to this). After discussing it with Rickard, we decided
modifying the assertion was the most practical way to address the
problem.
|
|
This commit implements erts_internal:system_check(schedulers) with the
intent of a basic responsiveness test check of the schedulers.
|
|
* rickard/ds-fixes:
Fix unique_SUITE for dirty schedulers
Add dirty scheduler process termination test
Ensure that work is done on the correct type of schedulers
Conflicts:
erts/emulator/beam/erl_process.c
erts/emulator/beam/erl_process.h
erts/emulator/beam/erl_process_dump.c
|
|
Only the actual call to the dirty nif is allowed to execute on
dirty schedulers. The dirty nif is not allowed to execute on
normal schedulers if dirty schedulers are available.
Arrival of exit signals and system tasks, while a process was
scheduled for execution on a dirty scheduler, could mess up the
process internal state.
Preparation for dirty system task has been made, but is currently
unused.
|
|
|
|
* sverk/proc-exiting-timer-race/OTP-13245:
erts: Fix race between receive timeout and exit signal
|
|
Microstate accounting is a way to track which state the
different threads within ERTS are in. The main usage area
is to pin point performance bottlenecks by checking which
states the threads are in and then from there figuring out
why and where to optimize.
Since checking whether microstate accounting is on or off is
relatively expensive if done in a short loop only a few of the
states are enabled by default and more states can be enabled
through configure.
I've done some benchmarking and the overhead with it turned off
is not noticible and with it on it is a fraction of a percent.
If you enable the extra states, depending on the benchmark,
the ovehead when turned off is about 1% and when turned on
somewhere inbetween 5-15%.
OTP-12345
|
|
ERTS_WRITE_UNLIKELY can be used to place global variables in
a specific section where only data that is very rarely modified
sits. This is used to improve cache locality.
|
|
* maint:
Introduce time management in native APIs
Introduce time warp safe replacement for safe_fixed option
Introduce time warp safe trace timestamp formats
Conflicts:
erts/emulator/beam/erl_bif_trace.c
erts/emulator/beam/erl_driver.h
erts/emulator/beam/erl_nif.h
erts/emulator/beam/erl_trace.c
erts/preloaded/ebin/erlang.beam
|
|
* rickard/monotonic-time-improvements/OTP-13222:
Introduce time management in native APIs
Introduce time warp safe replacement for safe_fixed option
Introduce time warp safe trace timestamp formats
|
|
New timestamp options for trace, sequential trace, and
system profile:
- monotonic_timestamp
- strict_monotonic_timestamp
|
|
* maint:
Fix dirty scheduler check in handle_aux_work
|
|
* sverk/safe-purging/OTP-13122:
erts: Ignore unexpected messages to erts_code_purger
erts: Optimize erlang:check_process_code
erts: Refactor check_process_code/3
erts: Make copy_literals more fail safe
erts: Move copy_literals/2 from erlang to erts_internal
erts: Make erlang:purge_module/1 safe
erts: Refactor code:purge/1 and code:soft_purge/1
erts: Introduce erts_code_purger
|
|
|
|
Must re-read 'state' after seizing proc locks as other thread may
have set EXITING.
|
|
* maint:
Do not allow aux work on dirty schedulers
|
|
* vinoski/dirty-sched-no-aux-work/OTP-13236:
Do not allow aux work on dirty schedulers
|
|
by ignoring literals.
erts_internal:check_process_code will be called again anyway
(with option {copy_literals, true}) before the module is actually purged.
No need to check literals twice.
|
|
* maint:
Light weight statistics of run queue lengths
Conflicts:
erts/preloaded/ebin/erlang.beam
|
|
- statistics(total_run_queue_lengths)
- statistics(run_queue_lengths)
- statistics(total_active_tasks)
- statistics(active_tasks)
Conflicts:
erts/emulator/beam/erl_process.c
|
|
The nature of aux work is such that dirty schedulers should not
attempt to perform it. Modify the code to ensure that dirty schedulers
avoid aux work.
Also fix an incorrect assumption about the size of a Uint in the
ErtsDirtySchedId type.
|
|
* lukas/erts/forker: (28 commits)
erts: Never abort in the forked child
erts: Mend ASSERT makro for erl_child_setup
erts: Allow enomem failures in port_SUITE
erts: iter_port sleep longer on freebsd
erts: Allow one dangling fd if there is a gethost port
erts: Only use forker StackAck on freebsd
erts: It is not possible to exit the forker driver
erts: Add forker StartAck for port start flowcontrol
erts: Fix large open_port arg segfault for win32
erts: Fix memory leak at async open port
kernel: Remove cmd server for unix os:cmd
erts: Add testcase for huge port environment
erts: Move os_pid to port hash to child setup
erts: Handle all EINTR and EAGAIN cases in child setup
erts: Make child_setup work with large environments
erts: Fix forker driver ifdefs for win32
erts: Fix uds socket handling for os x
erts: Fix dereferencing of unaligned integer for sparc
erts: Flatten too long io vectors in uds write
erts: Add fd count test for spawn_driver
...
Conflicts:
erts/emulator/beam/erl_node_tables.c
erts/preloaded/src/erts_internal.erl
|
|
Instead of forking from the beam process, we create a separate
process in which all forks are done. This has several advantages:
1) performance:
* don't have to close all fd's in the world
* fork only has to copy stuff from a small process
* work is done in a completely seperate process
* a 3x performance increase has been measured,
can be made even greater (10x) if we cache the
environment in child setup
2) stability
* the exec is done in another process than beam, which means that
if the file that we exec to is on an nfs that is not available
right now we will not block a scheduler until the nfs returns.
3) simplicity
* don't have to deal with SIGCHLD in the erts
Unfortunately, this solution also implies some badness.
1) There will always be a seperate process running together with
beam on unix. This could be confusing and undesirable.
2) We have to transfer the entire environment to child_setup
for each command.
OTP-13088
|
|
* rickard/ohmq-fixup/OTP-13047:
Replace off_heap_message_queue option with message_queue_data option
Always use literal_alloc
Distinguish between GC disabled by BIFs and other disabled GC
Fix process_info(_, off_heap_message_queue)
Off heap message queue test suite
Remove unused variable
Fix memory leaks
|
|
The message_queue_data option can have the values
- off_heap
- on_heap
- mixed
|